From patchwork Thu Aug 6 16:31:20 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Georgi Djakov X-Patchwork-Id: 11703755 Return-Path: Received: from mail.kernel.org (pdx-korg-mail-1.web.codeaurora.org [172.30.200.123]) by pdx-korg-patchwork-2.web.codeaurora.org (Postfix) with ESMTP id F0D8F722 for ; Thu, 6 Aug 2020 17:51:33 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by mail.kernel.org (Postfix) with ESMTP id 537982224D for ; Thu, 6 Aug 2020 17:51:34 +0000 (UTC) Authentication-Results: mail.kernel.org; dkim=pass (2048-bit key) header.d=linaro.org header.i=@linaro.org header.b="S/MUgXPZ" Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1728418AbgHFRvd (ORCPT ); Thu, 6 Aug 2020 13:51:33 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:40128 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1727899AbgHFQcV (ORCPT ); Thu, 6 Aug 2020 12:32:21 -0400 Received: from mail-wm1-x341.google.com (mail-wm1-x341.google.com [IPv6:2a00:1450:4864:20::341]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 2D73BC02B8C1 for ; Thu, 6 Aug 2020 09:31:35 -0700 (PDT) Received: by mail-wm1-x341.google.com with SMTP id g8so9393759wmk.3 for ; Thu, 06 Aug 2020 09:31:35 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=linaro.org; s=google; h=from:to:cc:subject:date:message-id:in-reply-to:references :mime-version:content-transfer-encoding; bh=89sbNvX6ByvD6Ay+Fn+uPrui3FWgVd/+bGNAilB1it4=; b=S/MUgXPZ1MTFSxm+FwPoBEU/CYFWgc/8fcYf49DWdR6W1gQIwyfPvAuhl6Fgv9J6ND posY1yvn36+il648dX2/VxyEg09FDwnfx6/9UHQKjO0jCdNDNUqu3p3GkoYq3se8xpFy b15ZJfMal66TM0CLaeWSvYg4NVr0F1s5wP1r9ONlub/h7N1QDnezZhHVCK7L8nrjo7Gf 4o8nP2aZuclOXZWvfwJKSL3G9PidRZJqMCrmaYdeP57X3OMTRtwxcom17JcaNdgMKdlU 3e2CUgnr0B4wSSAG0RzbYJTz3MWY+4qxKt9NGdl14XGvwOsRnDgacL8aIR1RurCy/oB2 RK7Q== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20161025; h=x-gm-message-state:from:to:cc:subject:date:message-id:in-reply-to :references:mime-version:content-transfer-encoding; bh=89sbNvX6ByvD6Ay+Fn+uPrui3FWgVd/+bGNAilB1it4=; b=LpSBELxZIuRMvVvPmk0sbUrqj8YjExRnOYsI1sLpCk6F6LctdPJSAHYp+W+ahwEqCr PLQzKLgctEbMnm6t15NOZgqtOyM2aXLaBt++ZIxlhmnNemJ3fxLwdLm/lXPiCHRdKLyL H9EkXyqSRnnbhtHiMxZvdpQHEHaJO8J14dDoUIZN+lx+SDAWBVB7IDcRfiHoC52I7q9+ /nqrh1+OdvfbNefA6M4az4v5ZHH5IYadLiah5KISZahkmY8rmg0vPr8nZHsrOF5urgip GzX6E5mpHvT097SOBpJMNN1GMvfNLMNzLqsDVQ2GHuSKaSzQpiMQNKOBCFkc/Fh1pJ+V FSag== X-Gm-Message-State: AOAM532u3j2f8fsC2sj5LjUDUuxPBIsG1MiBPF6ycgEoqG4lV8cOm/7S 6H9h6ud3Vre2aZTcWC0hZEoj0fs5yrE= X-Google-Smtp-Source: ABdhPJyFB2+t9EpOQ+hBTBA02b5nhQZjVGhO6jfWF3l3/z9sJn0Tqh5RyYZ4NidGmcJuCuQt40OBPg== X-Received: by 2002:a7b:cb98:: with SMTP id m24mr9183839wmi.10.1596731490536; Thu, 06 Aug 2020 09:31:30 -0700 (PDT) Received: from localhost.localdomain ([87.120.218.65]) by smtp.googlemail.com with ESMTPSA id i66sm7468537wma.35.2020.08.06.09.31.29 (version=TLS1_2 cipher=ECDHE-ECDSA-AES128-GCM-SHA256 bits=128/128); Thu, 06 Aug 2020 09:31:29 -0700 (PDT) From: Georgi Djakov To: linux-pm@vger.kernel.org, devicetree@vger.kernel.org Cc: robh+dt@kernel.org, bjorn.andersson@linaro.org, sibis@codeaurora.org, mka@chromium.org, dianders@chromium.org, georgi.djakov@linaro.org, linux-kernel@vger.kernel.org Subject: [PATCH v2 1/7] interconnect: Introduce xlate_extended() callback Date: Thu, 6 Aug 2020 19:31:20 +0300 Message-Id: <20200806163126.22667-2-georgi.djakov@linaro.org> X-Mailer: git-send-email 2.27.0 In-Reply-To: <20200806163126.22667-1-georgi.djakov@linaro.org> References: <20200806163126.22667-1-georgi.djakov@linaro.org> MIME-Version: 1.0 Sender: linux-pm-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-pm@vger.kernel.org Currently there is the xlate() callback, which is used by providers for mapping the nodes from phandle arguments. That's fine for simple mappings, but the phandle arguments could contain an additional data, such as tag information. Let's create another callback xlate_extended() for the cases where providers want also populate the path tag data. Tested-by: Sibi Sankar Reviewed-by: Sibi Sankar Reviewed-by: Matthias Kaehlcke Tested-by: Matthias Kaehlcke Signed-off-by: Georgi Djakov --- drivers/interconnect/core.c | 73 ++++++++++++++++++--------- include/linux/interconnect-provider.h | 17 ++++++- 2 files changed, 65 insertions(+), 25 deletions(-) diff --git a/drivers/interconnect/core.c b/drivers/interconnect/core.c index befd111049c0..6ccf55818e68 100644 --- a/drivers/interconnect/core.c +++ b/drivers/interconnect/core.c @@ -336,12 +336,13 @@ EXPORT_SYMBOL_GPL(of_icc_xlate_onecell); * Looks for interconnect provider under the node specified by @spec and if * found, uses xlate function of the provider to map phandle args to node. * - * Returns a valid pointer to struct icc_node on success or ERR_PTR() + * Returns a valid pointer to struct icc_node_data on success or ERR_PTR() * on failure. */ -struct icc_node *of_icc_get_from_provider(struct of_phandle_args *spec) +struct icc_node_data *of_icc_get_from_provider(struct of_phandle_args *spec) { struct icc_node *node = ERR_PTR(-EPROBE_DEFER); + struct icc_node_data *data = NULL; struct icc_provider *provider; if (!spec) @@ -349,14 +350,33 @@ struct icc_node *of_icc_get_from_provider(struct of_phandle_args *spec) mutex_lock(&icc_lock); list_for_each_entry(provider, &icc_providers, provider_list) { - if (provider->dev->of_node == spec->np) - node = provider->xlate(spec, provider->data); - if (!IS_ERR(node)) - break; + if (provider->dev->of_node == spec->np) { + if (provider->xlate_extended) { + data = provider->xlate_extended(spec, provider->data); + if (!IS_ERR(data)) { + node = data->node; + break; + } + } else { + node = provider->xlate(spec, provider->data); + if (!IS_ERR(node)) + break; + } + } } mutex_unlock(&icc_lock); - return node; + if (IS_ERR(node)) + return ERR_CAST(node); + + if (!data) { + data = kzalloc(sizeof(*data), GFP_KERNEL); + if (!data) + return ERR_PTR(-ENOMEM); + data->node = node; + } + + return data; } EXPORT_SYMBOL_GPL(of_icc_get_from_provider); @@ -403,7 +423,7 @@ EXPORT_SYMBOL_GPL(devm_of_icc_get); struct icc_path *of_icc_get_by_index(struct device *dev, int idx) { struct icc_path *path; - struct icc_node *src_node, *dst_node; + struct icc_node_data *src_data, *dst_data; struct device_node *np; struct of_phandle_args src_args, dst_args; int ret; @@ -441,39 +461,46 @@ struct icc_path *of_icc_get_by_index(struct device *dev, int idx) of_node_put(dst_args.np); - src_node = of_icc_get_from_provider(&src_args); + src_data = of_icc_get_from_provider(&src_args); - if (IS_ERR(src_node)) { - if (PTR_ERR(src_node) != -EPROBE_DEFER) + if (IS_ERR(src_data)) { + if (PTR_ERR(src_data) != -EPROBE_DEFER) dev_err(dev, "error finding src node: %ld\n", - PTR_ERR(src_node)); - return ERR_CAST(src_node); + PTR_ERR(src_data)); + return ERR_CAST(src_data); } - dst_node = of_icc_get_from_provider(&dst_args); + dst_data = of_icc_get_from_provider(&dst_args); - if (IS_ERR(dst_node)) { - if (PTR_ERR(dst_node) != -EPROBE_DEFER) + if (IS_ERR(dst_data)) { + if (PTR_ERR(dst_data) != -EPROBE_DEFER) dev_err(dev, "error finding dst node: %ld\n", - PTR_ERR(dst_node)); - return ERR_CAST(dst_node); + PTR_ERR(dst_data)); + kfree(src_data); + return ERR_CAST(dst_data); } mutex_lock(&icc_lock); - path = path_find(dev, src_node, dst_node); + path = path_find(dev, src_data->node, dst_data->node); mutex_unlock(&icc_lock); if (IS_ERR(path)) { dev_err(dev, "%s: invalid path=%ld\n", __func__, PTR_ERR(path)); - return path; + goto free_icc_data; } + if (src_data->tag && src_data->tag == dst_data->tag) + icc_set_tag(path, src_data->tag); + path->name = kasprintf(GFP_KERNEL, "%s-%s", - src_node->name, dst_node->name); + src_data->node->name, dst_data->node->name); if (!path->name) { kfree(path); - return ERR_PTR(-ENOMEM); + path = ERR_PTR(-ENOMEM); } +free_icc_data: + kfree(src_data); + kfree(dst_data); return path; } EXPORT_SYMBOL_GPL(of_icc_get_by_index); @@ -975,7 +1002,7 @@ int icc_provider_add(struct icc_provider *provider) { if (WARN_ON(!provider->set)) return -EINVAL; - if (WARN_ON(!provider->xlate)) + if (WARN_ON(!provider->xlate && !provider->xlate_extended)) return -EINVAL; mutex_lock(&icc_lock); diff --git a/include/linux/interconnect-provider.h b/include/linux/interconnect-provider.h index 4735518de515..4d535fddd5d3 100644 --- a/include/linux/interconnect-provider.h +++ b/include/linux/interconnect-provider.h @@ -14,6 +14,17 @@ struct icc_node; struct of_phandle_args; +/** + * struct icc_node_data - icc node data + * + * @node: icc node + * @tag: tag + */ +struct icc_node_data { + struct icc_node *node; + u32 tag; +}; + /** * struct icc_onecell_data - driver data for onecell interconnect providers * @@ -39,6 +50,7 @@ struct icc_node *of_icc_xlate_onecell(struct of_phandle_args *spec, * @pre_aggregate: pointer to device specific function that is called * before the aggregation begins (optional) * @xlate: provider-specific callback for mapping nodes from phandle arguments + * @xlate_extended: vendor-specific callback for mapping node data from phandle arguments * @dev: the device this interconnect provider belongs to * @users: count of active users * @inter_set: whether inter-provider pairs will be configured with @set @@ -52,6 +64,7 @@ struct icc_provider { u32 peak_bw, u32 *agg_avg, u32 *agg_peak); void (*pre_aggregate)(struct icc_node *node); struct icc_node* (*xlate)(struct of_phandle_args *spec, void *data); + struct icc_node_data* (*xlate_extended)(struct of_phandle_args *spec, void *data); struct device *dev; int users; bool inter_set; @@ -105,7 +118,7 @@ void icc_node_del(struct icc_node *node); int icc_nodes_remove(struct icc_provider *provider); int icc_provider_add(struct icc_provider *provider); int icc_provider_del(struct icc_provider *provider); -struct icc_node *of_icc_get_from_provider(struct of_phandle_args *spec); +struct icc_node_data *of_icc_get_from_provider(struct of_phandle_args *spec); #else @@ -157,7 +170,7 @@ static inline int icc_provider_del(struct icc_provider *provider) return -ENOTSUPP; } -static inline struct icc_node *of_icc_get_from_provider(struct of_phandle_args *spec) +static inline struct icc_node_data *of_icc_get_from_provider(struct of_phandle_args *spec) { return ERR_PTR(-ENOTSUPP); } From patchwork Thu Aug 6 16:31:21 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Georgi Djakov X-Patchwork-Id: 11703757 Return-Path: Received: from mail.kernel.org (pdx-korg-mail-1.web.codeaurora.org [172.30.200.123]) by pdx-korg-patchwork-2.web.codeaurora.org (Postfix) with ESMTP id 54DF5722 for ; Thu, 6 Aug 2020 17:51:41 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by mail.kernel.org (Postfix) with ESMTP id B8DC222D03 for ; Thu, 6 Aug 2020 17:51:41 +0000 (UTC) Authentication-Results: mail.kernel.org; dkim=pass (2048-bit key) header.d=linaro.org header.i=@linaro.org header.b="c/AghX40" Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1729825AbgHFRvk (ORCPT ); Thu, 6 Aug 2020 13:51:40 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:40130 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1728516AbgHFQcI (ORCPT ); Thu, 6 Aug 2020 12:32:08 -0400 Received: from mail-wr1-x442.google.com (mail-wr1-x442.google.com [IPv6:2a00:1450:4864:20::442]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id F0258C0F26C7 for ; Thu, 6 Aug 2020 09:31:33 -0700 (PDT) Received: by mail-wr1-x442.google.com with SMTP id c15so8385114wrs.11 for ; Thu, 06 Aug 2020 09:31:33 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=linaro.org; s=google; h=from:to:cc:subject:date:message-id:in-reply-to:references :mime-version:content-transfer-encoding; bh=UeSaeFBmaX2UOS8vhf5MdyTixeaMCetcbpgjFTLJmfg=; b=c/AghX40N+5md1YLT5QwCUuxicFBpduiPvQLgeJIBCTUe/0RUdBrQNPaaahVmlPoBW Eb1LQr9nje/4ow0B21v8Y0G10Ef4553v81DuNXrdFAEGBMyIaXrrkkwqfdFZVovnI5kG SOHYw2KE0OCW+OvE6SlVyV5jjdEiUXPiOKB1fCCkuALyca1Urr66LIth/I7g7iwK5Em6 eQDiyXY+3KIFlzHJp7yvzEj4+93pp+DXGd4i/qhRsjabpNdhkFQhL7k7ior5uQm9sFIe iD9uR4m9xNgEtajOZ260W45eOKiBoL/r6VBV7vLdFGc2/TwTrMy5LE+bDoonA0BdUfMf /PfA== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20161025; h=x-gm-message-state:from:to:cc:subject:date:message-id:in-reply-to :references:mime-version:content-transfer-encoding; bh=UeSaeFBmaX2UOS8vhf5MdyTixeaMCetcbpgjFTLJmfg=; b=qnYFNZmTSJNYWhsHlb/VGeNaq1umqD6LS+IQfyPxinqvdqvP5ri7qKTNzl8saEba5J i7aNS9Wj5gI8NZjgKh8IcYSTt6507i66qdNu8+fONZCKU3KYKfywaBZOr0qjCnn/e3bP JsiZFEDcEdxuBieZ1f4nlL/J3Mr5Pj45u4opE7mEUx3h9neCIRDyVZp9FthP0U6ck5Ra d96n5XOdi4WRIc4rFngG2WDQC4mr/zdSXMMzmHRFQDpeWMoOGqQgX+T4yfrHC2L4fqm6 +j6KP5/9T5k5JnR02otjQBbuCo3m8io6AX4NMKAxVjzuAqEqe+jnoIKhgWHSDf6xPvw8 aBAg== X-Gm-Message-State: AOAM531ZEGNFAiC9B9HBilzXKyA9QM85w1wD0xLLZ6czJtPuED3mlmNc 3VqKSdrAf8mglpAR8xDN82OY7u6LkeU= X-Google-Smtp-Source: ABdhPJzF+qEtbxy0Prt75MMumjbxAWyjUEH4K5XMd0aIV/cqwRkDKfESNT3Wwyv5UWulYZyvkpM8/Q== X-Received: by 2002:a05:6000:181:: with SMTP id p1mr8016753wrx.310.1596731492173; Thu, 06 Aug 2020 09:31:32 -0700 (PDT) Received: from localhost.localdomain ([87.120.218.65]) by smtp.googlemail.com with ESMTPSA id i66sm7468537wma.35.2020.08.06.09.31.30 (version=TLS1_2 cipher=ECDHE-ECDSA-AES128-GCM-SHA256 bits=128/128); Thu, 06 Aug 2020 09:31:31 -0700 (PDT) From: Georgi Djakov To: linux-pm@vger.kernel.org, devicetree@vger.kernel.org Cc: robh+dt@kernel.org, bjorn.andersson@linaro.org, sibis@codeaurora.org, mka@chromium.org, dianders@chromium.org, georgi.djakov@linaro.org, linux-kernel@vger.kernel.org Subject: [PATCH v2 2/7] dt-bindings: interconnect: Document the support of optional path tag Date: Thu, 6 Aug 2020 19:31:21 +0300 Message-Id: <20200806163126.22667-3-georgi.djakov@linaro.org> X-Mailer: git-send-email 2.27.0 In-Reply-To: <20200806163126.22667-1-georgi.djakov@linaro.org> References: <20200806163126.22667-1-georgi.djakov@linaro.org> MIME-Version: 1.0 Sender: linux-pm-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-pm@vger.kernel.org Let's document that we now support specifying path tag information in the arg cells of the 'interconnects' DT property. This information would be populated when the xlate_extended() callback is used. Specifying the tag in DT will allow the interconnect framework to do the aggregation based on the tag automatically. The users can still use the icc_set_tag() API if/when needed. Signed-off-by: Georgi Djakov Reviewed-by: Rob Herring --- .../bindings/interconnect/interconnect.txt | 24 ++++++++++++++++++- 1 file changed, 23 insertions(+), 1 deletion(-) diff --git a/Documentation/devicetree/bindings/interconnect/interconnect.txt b/Documentation/devicetree/bindings/interconnect/interconnect.txt index 6f5d23a605b7..138c544c8c8c 100644 --- a/Documentation/devicetree/bindings/interconnect/interconnect.txt +++ b/Documentation/devicetree/bindings/interconnect/interconnect.txt @@ -19,7 +19,8 @@ directly. Required properties: - compatible : contains the interconnect provider compatible string - #interconnect-cells : number of cells in a interconnect specifier needed to - encode the interconnect node id + encode the interconnect node id and optionally add a + path tag Example: @@ -44,6 +45,10 @@ components it has to interact with. Required properties: interconnects : Pairs of phandles and interconnect provider specifier to denote the edge source and destination ports of the interconnect path. + An optional path tag value could specified as additional argument + to both endpoints and in such cases, this information will be passed + to the interconnect framework to do aggregation based on the attached + tag. Optional properties: interconnect-names : List of interconnect path name strings sorted in the same @@ -62,3 +67,20 @@ Example: interconnects = <&pnoc MASTER_SDCC_1 &bimc SLAVE_EBI_CH0>; interconnect-names = "sdhc-mem"; }; + +Example with path tags: + + gnoc: interconnect@17900000 { + ... + interconnect-cells = <2>; + }; + + mnoc: interconnect@1380000 { + ... + interconnect-cells = <2>; + }; + + cpu@0 { + ... + interconnects = <&gnoc MASTER_APPSS_PROC 3 &mnoc SLAVE_EBI1 3>; + } From patchwork Thu Aug 6 16:31:22 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Georgi Djakov X-Patchwork-Id: 11703753 Return-Path: Received: from mail.kernel.org (pdx-korg-mail-1.web.codeaurora.org [172.30.200.123]) by pdx-korg-patchwork-2.web.codeaurora.org (Postfix) with ESMTP id E158B1731 for ; Thu, 6 Aug 2020 17:51:32 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by mail.kernel.org (Postfix) with ESMTP id 4D2452224D for ; Thu, 6 Aug 2020 17:51:33 +0000 (UTC) Authentication-Results: mail.kernel.org; dkim=pass (2048-bit key) header.d=linaro.org header.i=@linaro.org header.b="gI3p6b8E" Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1729744AbgHFRva (ORCPT ); Thu, 6 Aug 2020 13:51:30 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:40146 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1728418AbgHFQc1 (ORCPT ); Thu, 6 Aug 2020 12:32:27 -0400 Received: from mail-wr1-x441.google.com (mail-wr1-x441.google.com [IPv6:2a00:1450:4864:20::441]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 94D1AC02B8C2 for ; Thu, 6 Aug 2020 09:31:35 -0700 (PDT) Received: by mail-wr1-x441.google.com with SMTP id p20so9705794wrf.0 for ; Thu, 06 Aug 2020 09:31:35 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=linaro.org; s=google; h=from:to:cc:subject:date:message-id:in-reply-to:references :mime-version:content-transfer-encoding; bh=p6XrrMy9U9a6D72/M7vouTgDf12ccI5j+g02H66Xr7c=; b=gI3p6b8ECCrNo9n/aOwg75F407VUCIBJzIHiUJ3ZTR5OJFXCVSok01gaibSuM1Crx6 G+v1zWeVB7wj2EJV488CKSi2e1wbKEGP1HvupPK77bODf80LKhyrtn5EeqNbDtZNWg/P JBNA+tpVMCZZ1Dv7ZNqlPbr9WxTrbRBQMWgRR8Wb4fTs67gYfeUr20pC0J7BNRpmoZBr 8hRhJng73ZiWa05IyZViEuOyDnXuvdD1O/yVXrIPezQZgbyK1Udc4J+3zuJUQk5acbb8 yoRERyaZJ9Leh42ctG9D+JzoQs+z70GYaBRWhq/+myYwIJuDZmGP2p1r3Q57fRGjLQP3 lH2w== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20161025; h=x-gm-message-state:from:to:cc:subject:date:message-id:in-reply-to :references:mime-version:content-transfer-encoding; bh=p6XrrMy9U9a6D72/M7vouTgDf12ccI5j+g02H66Xr7c=; b=Gh8tjxc/vRq2UDJjJae805IxQ+Jo9m3OT9HU9qv8Y0g9XTliu5AKyJOS1/0xC4Sa1J Q2wMhb41DQOpC7xcKSzh/tCFPFWK8/AHBGChpH/95NxBcDdOSZ1OWfWxb5kNMzrJTxHS ID5DJcH1LLIIPhqqK4JqujrUnOOwODKsqoWV4AiE0BfiFs66jn9CeeP2QFEFataWqhe1 Hgxw5WnN+O2yptMqVwrh+RCBKTtevXPONyUH1llTgCm2t244AAwuugexQnS4bFXldwc4 bEaPYpJaKd0Q4FbQVWLO5CUTLU/Il5HCmy72/edSAxPKwMUjlfSkifSylq9Msd3heeW6 An6Q== X-Gm-Message-State: AOAM5334HeX/viky+3JHB7MfXem/hTWQmX3FvuSKTxV+qJ5HCwA2HOrN LAvfBbfMTUT+Y2l89OTeXY2U0MBrE4U= X-Google-Smtp-Source: ABdhPJzNNUfPimsDxn89xZX6EUAh0/BfX6oyvTuoGwFBIfa1ooTzH26s1ikWWa07mwCAl6TlUUNU1g== X-Received: by 2002:adf:ba83:: with SMTP id p3mr8390078wrg.246.1596731493713; Thu, 06 Aug 2020 09:31:33 -0700 (PDT) Received: from localhost.localdomain ([87.120.218.65]) by smtp.googlemail.com with ESMTPSA id i66sm7468537wma.35.2020.08.06.09.31.32 (version=TLS1_2 cipher=ECDHE-ECDSA-AES128-GCM-SHA256 bits=128/128); Thu, 06 Aug 2020 09:31:33 -0700 (PDT) From: Georgi Djakov To: linux-pm@vger.kernel.org, devicetree@vger.kernel.org Cc: robh+dt@kernel.org, bjorn.andersson@linaro.org, sibis@codeaurora.org, mka@chromium.org, dianders@chromium.org, georgi.djakov@linaro.org, linux-kernel@vger.kernel.org Subject: [PATCH v2 3/7] interconnect: qcom: Implement xlate_extended() to parse tags Date: Thu, 6 Aug 2020 19:31:22 +0300 Message-Id: <20200806163126.22667-4-georgi.djakov@linaro.org> X-Mailer: git-send-email 2.27.0 In-Reply-To: <20200806163126.22667-1-georgi.djakov@linaro.org> References: <20200806163126.22667-1-georgi.djakov@linaro.org> MIME-Version: 1.0 Sender: linux-pm-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-pm@vger.kernel.org Implement a function to parse the arguments of the "interconnects" DT property and populate the interconnect path tags if this information is available. Tested-by: Sibi Sankar Reviewed-by: Sibi Sankar Signed-off-by: Georgi Djakov --- drivers/interconnect/qcom/icc-rpmh.c | 27 +++++++++++++++++++++++++++ drivers/interconnect/qcom/icc-rpmh.h | 1 + 2 files changed, 28 insertions(+) diff --git a/drivers/interconnect/qcom/icc-rpmh.c b/drivers/interconnect/qcom/icc-rpmh.c index 3ac5182c9ab2..7e538155e486 100644 --- a/drivers/interconnect/qcom/icc-rpmh.c +++ b/drivers/interconnect/qcom/icc-rpmh.c @@ -6,6 +6,8 @@ #include #include #include +#include +#include #include "bcm-voter.h" #include "icc-rpmh.h" @@ -92,6 +94,31 @@ int qcom_icc_set(struct icc_node *src, struct icc_node *dst) } EXPORT_SYMBOL_GPL(qcom_icc_set); +struct icc_node_data *qcom_icc_xlate_extended(struct of_phandle_args *spec, void *data) +{ + struct icc_node_data *ndata; + struct icc_node *node; + + node = of_icc_xlate_onecell(spec, data); + if (IS_ERR(node)) + return ERR_CAST(node); + + ndata = kzalloc(sizeof(*ndata), GFP_KERNEL); + if (!ndata) + return ERR_PTR(-ENOMEM); + + ndata->node = node; + + if (spec->args_count == 2) + ndata->tag = spec->args[1]; + + if (spec->args_count > 2) + pr_warn("%pOF: Too many arguments, path tag is not parsed\n", spec->np); + + return ndata; +} +EXPORT_SYMBOL_GPL(qcom_icc_xlate_extended); + /** * qcom_icc_bcm_init - populates bcm aux data and connect qnodes * @bcm: bcm to be initialized diff --git a/drivers/interconnect/qcom/icc-rpmh.h b/drivers/interconnect/qcom/icc-rpmh.h index 903d25e61984..1dac39bc255d 100644 --- a/drivers/interconnect/qcom/icc-rpmh.h +++ b/drivers/interconnect/qcom/icc-rpmh.h @@ -143,6 +143,7 @@ struct qcom_icc_desc { int qcom_icc_aggregate(struct icc_node *node, u32 tag, u32 avg_bw, u32 peak_bw, u32 *agg_avg, u32 *agg_peak); int qcom_icc_set(struct icc_node *src, struct icc_node *dst); +struct icc_node_data *qcom_icc_xlate_extended(struct of_phandle_args *spec, void *data); int qcom_icc_bcm_init(struct qcom_icc_bcm *bcm, struct device *dev); void qcom_icc_pre_aggregate(struct icc_node *node); From patchwork Thu Aug 6 16:31:23 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Georgi Djakov X-Patchwork-Id: 11703749 Return-Path: Received: from mail.kernel.org (pdx-korg-mail-1.web.codeaurora.org [172.30.200.123]) by pdx-korg-patchwork-2.web.codeaurora.org (Postfix) with ESMTP id 48A1D138C for ; Thu, 6 Aug 2020 17:51:28 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by mail.kernel.org (Postfix) with ESMTP id A9A5A221E2 for ; Thu, 6 Aug 2020 17:51:28 +0000 (UTC) Authentication-Results: mail.kernel.org; dkim=pass (2048-bit key) header.d=linaro.org header.i=@linaro.org header.b="rDkRS6zy" Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1728751AbgHFRvQ (ORCPT ); Thu, 6 Aug 2020 13:51:16 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:40148 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1728600AbgHFQcb (ORCPT ); Thu, 6 Aug 2020 12:32:31 -0400 Received: from mail-wr1-x441.google.com (mail-wr1-x441.google.com [IPv6:2a00:1450:4864:20::441]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 13639C02B8C5 for ; Thu, 6 Aug 2020 09:31:37 -0700 (PDT) Received: by mail-wr1-x441.google.com with SMTP id r2so39517688wrs.8 for ; Thu, 06 Aug 2020 09:31:37 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=linaro.org; s=google; h=from:to:cc:subject:date:message-id:in-reply-to:references :mime-version:content-transfer-encoding; bh=K0z+nN4Q2Lop7WGeqT2R4X33dK+rJ9oWoUAFXO5nbng=; b=rDkRS6zy1V+kPfp+/a8fkd3XWxVI36H7Hci5dkKNDtqe7glv3N01cuhkrd9149KBrp KqkqRLtj4VFf4J5D2yIR5qFHExE+56hq+F86aoeNqR2YTFyg7+29Ftq/JxxICKK+t/uP 4EPyBAPK3afS2C+RGssubuyDS1X2VmflQyupcqs/imRgPFfht4CL/pZM4ZF4AA1UXQGC c8Tnhq57i6SnofcJ0PgQ8/HJ/vTN3fSezs9s2+IHsj1Jk3e9KBmEQ6ODk4hf6J6NNrGc oWcMJ/dxevSCE/kW447IzlLPCiXDgDxe91/zr8mttDdVpDTbNrgVWUE09FqwZJr4IOoH sT5g== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20161025; h=x-gm-message-state:from:to:cc:subject:date:message-id:in-reply-to :references:mime-version:content-transfer-encoding; bh=K0z+nN4Q2Lop7WGeqT2R4X33dK+rJ9oWoUAFXO5nbng=; b=NPKvDNlolW5QuSOseLuQwhbdsoG7zviu1aHdnUtUhOVQp4+I5ID1xa1+uLzGfioNnb 4EWqYbGQ9JUt2M/PwPz0PT/ZAAWFJIMLZq/wbV11xuQkMOJPUNLAvxBgtrauQQIhNB1c +AzlTEGFX092uH1oVrb5v3UbZAusliidrFk9d94vqo1jdMVfKffPL9J+nuGHmaAvYvnf Pc9qOyCdIcGFvjd9mXfKDAhZrx7UMGv+m+5T/d3fyoPMAWq23ah7t4zbasSmr1c3Kdy2 b2F6R756xRgUkToXCyeCJJE/cvnUpk0gFL/g3feXWLmylRAKFH+gT2Ae54962eqc1/Ve MHxA== X-Gm-Message-State: AOAM530eb11qRqFngCUzQNoESFsW5zf+1YHfgfAm7zbc2aKy8jwGrE8e Tgh4DxRAz2Lz/NbxBsFfMtDJzB40E8w= X-Google-Smtp-Source: ABdhPJxEWkKxjmYT87kSQKI/wM2IQuf7tTYF26VwCw7rIKhm7CGMFJ0ShTSmBNzBxRiYEhaR4GamdA== X-Received: by 2002:adf:dd4f:: with SMTP id u15mr8195593wrm.275.1596731495462; Thu, 06 Aug 2020 09:31:35 -0700 (PDT) Received: from localhost.localdomain ([87.120.218.65]) by smtp.googlemail.com with ESMTPSA id i66sm7468537wma.35.2020.08.06.09.31.33 (version=TLS1_2 cipher=ECDHE-ECDSA-AES128-GCM-SHA256 bits=128/128); Thu, 06 Aug 2020 09:31:34 -0700 (PDT) From: Georgi Djakov To: linux-pm@vger.kernel.org, devicetree@vger.kernel.org Cc: robh+dt@kernel.org, bjorn.andersson@linaro.org, sibis@codeaurora.org, mka@chromium.org, dianders@chromium.org, georgi.djakov@linaro.org, linux-kernel@vger.kernel.org Subject: [PATCH v2 4/7] interconnect: qcom: sdm845: Replace xlate with xlate_extended Date: Thu, 6 Aug 2020 19:31:23 +0300 Message-Id: <20200806163126.22667-5-georgi.djakov@linaro.org> X-Mailer: git-send-email 2.27.0 In-Reply-To: <20200806163126.22667-1-georgi.djakov@linaro.org> References: <20200806163126.22667-1-georgi.djakov@linaro.org> MIME-Version: 1.0 Sender: linux-pm-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-pm@vger.kernel.org Use the qcom_icc_xlate_extended() in order to parse tags, that are specified as an additional arguments to the path endpoints in DT. Tested-by: Sibi Sankar Reviewed-by: Sibi Sankar Reviewed-by: Matthias Kaehlcke Signed-off-by: Georgi Djakov --- drivers/interconnect/qcom/sdm845.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/interconnect/qcom/sdm845.c b/drivers/interconnect/qcom/sdm845.c index f6c7b969520d..3b81dbb71b0b 100644 --- a/drivers/interconnect/qcom/sdm845.c +++ b/drivers/interconnect/qcom/sdm845.c @@ -469,7 +469,7 @@ static int qnoc_probe(struct platform_device *pdev) provider->set = qcom_icc_set; provider->pre_aggregate = qcom_icc_pre_aggregate; provider->aggregate = qcom_icc_aggregate; - provider->xlate = of_icc_xlate_onecell; + provider->xlate_extended = qcom_icc_xlate_extended; INIT_LIST_HEAD(&provider->nodes); provider->data = data; From patchwork Thu Aug 6 16:31:24 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Georgi Djakov X-Patchwork-Id: 11703501 Return-Path: Received: from mail.kernel.org (pdx-korg-mail-1.web.codeaurora.org [172.30.200.123]) by pdx-korg-patchwork-2.web.codeaurora.org (Postfix) with ESMTP id 5EBFD1392 for ; Thu, 6 Aug 2020 16:33:35 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by mail.kernel.org (Postfix) with ESMTP id AE39A2311B for ; Thu, 6 Aug 2020 16:33:35 +0000 (UTC) Authentication-Results: mail.kernel.org; dkim=pass (2048-bit key) header.d=linaro.org header.i=@linaro.org header.b="GaCQ8rth" Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1728735AbgHFQdZ (ORCPT ); Thu, 6 Aug 2020 12:33:25 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:40094 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1728648AbgHFQcg (ORCPT ); Thu, 6 Aug 2020 12:32:36 -0400 Received: from mail-wm1-x344.google.com (mail-wm1-x344.google.com [IPv6:2a00:1450:4864:20::344]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id CA378C02B8C8 for ; Thu, 6 Aug 2020 09:31:38 -0700 (PDT) Received: by mail-wm1-x344.google.com with SMTP id p14so9389133wmg.1 for ; Thu, 06 Aug 2020 09:31:38 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=linaro.org; s=google; h=from:to:cc:subject:date:message-id:in-reply-to:references :mime-version:content-transfer-encoding; bh=q/57p8pjM914Lcbk7bBCIqievLGqZS/SzbLkF/PRwXQ=; b=GaCQ8rthE/nMuAM5wV0kJwOUiCLiJ1O/PjmZ9cvtFRhp860Y/1KNLhsaWLlTmphvuz hlRMsnKPH/8Ao+JDlz11IKZSOWdyvyC6AYx38fj4JEnOzx/H35jIHKNco3qgooNf6Uvb xhs2iO49EjwQSkXwhCozPt0qoXrfd7UnL2WV/UivPQptYp3RU3hmcqGZNscaKO5VCYrd S95FKZ5yKa45pkdIe0lDqgYMq9TR7xk1tXXuzrCYIwcckD3XTR1W4d0aTHG/V9+Wbx5W Cft02o6noz4dfOnAGO0nM72mE/atmPZhCwnz7Dq5+RBoAacsJQj7S+4JGWLqrzlabLXI Usqg== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20161025; h=x-gm-message-state:from:to:cc:subject:date:message-id:in-reply-to :references:mime-version:content-transfer-encoding; bh=q/57p8pjM914Lcbk7bBCIqievLGqZS/SzbLkF/PRwXQ=; b=eSRDbnyKa5nAzHAhbCVTATrXIeZheYufW0HR5puNgPzJ9lKhMOr2Vw6IcHt4oYtCw1 cmoSNRSv7ammG0VmwqcQ1sBU6ufH7JtlrMFf5C3XAI7nZ+c9GRMcfrfN+Jf5Rqst+gtz B1Pc7iUdMj9OnipZ6777Mz4rjIbYoph+ERo08xpjNQaufiWZc7EZcMKbeLDE215i4JLp mn1BIhAP+iajNvEYMZadS3Taaxk4z8eyyfghpDXmoyDW5uQ/mN/IUowuqg4ICiwDJRjX 8VBjsGZmg5/O4Gnd+PkmE+BYQJ6PW/8T9kHmiOQ3j2TXZhB6xOqCKfYSqfk3nBH+FGMJ AusA== X-Gm-Message-State: AOAM530ZeM9UNxCgMOOM/dgRy1Gs5KmNg1txl+A8uvNgEKNWapskcd+r gsJetvRVSFI/KGt6wdTho7a6t7vvkjQ= X-Google-Smtp-Source: ABdhPJxAesQbqbXg5mCZ+OU1K2tf6BHYH72efs+8li0fTcb6bfdNUKOyz5yU/K/UYMHymreyNE9JaQ== X-Received: by 2002:a1c:8094:: with SMTP id b142mr9284568wmd.59.1596731496969; Thu, 06 Aug 2020 09:31:36 -0700 (PDT) Received: from localhost.localdomain ([87.120.218.65]) by smtp.googlemail.com with ESMTPSA id i66sm7468537wma.35.2020.08.06.09.31.35 (version=TLS1_2 cipher=ECDHE-ECDSA-AES128-GCM-SHA256 bits=128/128); Thu, 06 Aug 2020 09:31:36 -0700 (PDT) From: Georgi Djakov To: linux-pm@vger.kernel.org, devicetree@vger.kernel.org Cc: robh+dt@kernel.org, bjorn.andersson@linaro.org, sibis@codeaurora.org, mka@chromium.org, dianders@chromium.org, georgi.djakov@linaro.org, linux-kernel@vger.kernel.org Subject: [PATCH v2 5/7] arm64: dts: qcom: sdm845: Increase the number of interconnect cells Date: Thu, 6 Aug 2020 19:31:24 +0300 Message-Id: <20200806163126.22667-6-georgi.djakov@linaro.org> X-Mailer: git-send-email 2.27.0 In-Reply-To: <20200806163126.22667-1-georgi.djakov@linaro.org> References: <20200806163126.22667-1-georgi.djakov@linaro.org> MIME-Version: 1.0 Sender: linux-pm-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-pm@vger.kernel.org Increase the number of interconnect-cells, as now we can include the tag information. The consumers can specify the path tag as an additional argument to the endpoints. Tested-by: Sibi Sankar Reviewed-by: Sibi Sankar Reviewed-by: Matthias Kaehlcke Signed-off-by: Georgi Djakov --- arch/arm64/boot/dts/qcom/sdm845.dtsi | 44 ++++++++++++++-------------- 1 file changed, 22 insertions(+), 22 deletions(-) diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi index e506793407d8..94f5d27f2927 100644 --- a/arch/arm64/boot/dts/qcom/sdm845.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi @@ -200,7 +200,7 @@ &LITTLE_CPU_SLEEP_1 dynamic-power-coefficient = <100>; qcom,freq-domain = <&cpufreq_hw 0>; operating-points-v2 = <&cpu0_opp_table>; - interconnects = <&gladiator_noc MASTER_APPSS_PROC &mem_noc SLAVE_EBI1>, + interconnects = <&gladiator_noc MASTER_APPSS_PROC 3 &mem_noc SLAVE_EBI1 3>, <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>; #cooling-cells = <2>; next-level-cache = <&L2_0>; @@ -225,7 +225,7 @@ &LITTLE_CPU_SLEEP_1 dynamic-power-coefficient = <100>; qcom,freq-domain = <&cpufreq_hw 0>; operating-points-v2 = <&cpu0_opp_table>; - interconnects = <&gladiator_noc MASTER_APPSS_PROC &mem_noc SLAVE_EBI1>, + interconnects = <&gladiator_noc MASTER_APPSS_PROC 3 &mem_noc SLAVE_EBI1 3>, <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>; #cooling-cells = <2>; next-level-cache = <&L2_100>; @@ -247,7 +247,7 @@ &LITTLE_CPU_SLEEP_1 dynamic-power-coefficient = <100>; qcom,freq-domain = <&cpufreq_hw 0>; operating-points-v2 = <&cpu0_opp_table>; - interconnects = <&gladiator_noc MASTER_APPSS_PROC &mem_noc SLAVE_EBI1>, + interconnects = <&gladiator_noc MASTER_APPSS_PROC 3 &mem_noc SLAVE_EBI1 3>, <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>; #cooling-cells = <2>; next-level-cache = <&L2_200>; @@ -269,7 +269,7 @@ &LITTLE_CPU_SLEEP_1 dynamic-power-coefficient = <100>; qcom,freq-domain = <&cpufreq_hw 0>; operating-points-v2 = <&cpu0_opp_table>; - interconnects = <&gladiator_noc MASTER_APPSS_PROC &mem_noc SLAVE_EBI1>, + interconnects = <&gladiator_noc MASTER_APPSS_PROC 3 &mem_noc SLAVE_EBI1 3>, <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>; #cooling-cells = <2>; next-level-cache = <&L2_300>; @@ -291,7 +291,7 @@ &BIG_CPU_SLEEP_1 dynamic-power-coefficient = <396>; qcom,freq-domain = <&cpufreq_hw 1>; operating-points-v2 = <&cpu4_opp_table>; - interconnects = <&gladiator_noc MASTER_APPSS_PROC &mem_noc SLAVE_EBI1>, + interconnects = <&gladiator_noc MASTER_APPSS_PROC 3 &mem_noc SLAVE_EBI1 3>, <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>; #cooling-cells = <2>; next-level-cache = <&L2_400>; @@ -313,7 +313,7 @@ &BIG_CPU_SLEEP_1 dynamic-power-coefficient = <396>; qcom,freq-domain = <&cpufreq_hw 1>; operating-points-v2 = <&cpu4_opp_table>; - interconnects = <&gladiator_noc MASTER_APPSS_PROC &mem_noc SLAVE_EBI1>, + interconnects = <&gladiator_noc MASTER_APPSS_PROC 3 &mem_noc SLAVE_EBI1 3>, <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>; #cooling-cells = <2>; next-level-cache = <&L2_500>; @@ -335,7 +335,7 @@ &BIG_CPU_SLEEP_1 dynamic-power-coefficient = <396>; qcom,freq-domain = <&cpufreq_hw 1>; operating-points-v2 = <&cpu4_opp_table>; - interconnects = <&gladiator_noc MASTER_APPSS_PROC &mem_noc SLAVE_EBI1>, + interconnects = <&gladiator_noc MASTER_APPSS_PROC 3 &mem_noc SLAVE_EBI1 3>, <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>; #cooling-cells = <2>; next-level-cache = <&L2_600>; @@ -357,7 +357,7 @@ &BIG_CPU_SLEEP_1 dynamic-power-coefficient = <396>; qcom,freq-domain = <&cpufreq_hw 1>; operating-points-v2 = <&cpu4_opp_table>; - interconnects = <&gladiator_noc MASTER_APPSS_PROC &mem_noc SLAVE_EBI1>, + interconnects = <&gladiator_noc MASTER_APPSS_PROC 3 &mem_noc SLAVE_EBI1 3>, <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>; #cooling-cells = <2>; next-level-cache = <&L2_700>; @@ -2011,49 +2011,49 @@ pcie1_lane: lanes@1c06200 { mem_noc: interconnect@1380000 { compatible = "qcom,sdm845-mem-noc"; reg = <0 0x01380000 0 0x27200>; - #interconnect-cells = <1>; + #interconnect-cells = <2>; qcom,bcm-voters = <&apps_bcm_voter>; }; dc_noc: interconnect@14e0000 { compatible = "qcom,sdm845-dc-noc"; reg = <0 0x014e0000 0 0x400>; - #interconnect-cells = <1>; + #interconnect-cells = <2>; qcom,bcm-voters = <&apps_bcm_voter>; }; config_noc: interconnect@1500000 { compatible = "qcom,sdm845-config-noc"; reg = <0 0x01500000 0 0x5080>; - #interconnect-cells = <1>; + #interconnect-cells = <2>; qcom,bcm-voters = <&apps_bcm_voter>; }; system_noc: interconnect@1620000 { compatible = "qcom,sdm845-system-noc"; reg = <0 0x01620000 0 0x18080>; - #interconnect-cells = <1>; + #interconnect-cells = <2>; qcom,bcm-voters = <&apps_bcm_voter>; }; aggre1_noc: interconnect@16e0000 { compatible = "qcom,sdm845-aggre1-noc"; reg = <0 0x016e0000 0 0x15080>; - #interconnect-cells = <1>; + #interconnect-cells = <2>; qcom,bcm-voters = <&apps_bcm_voter>; }; aggre2_noc: interconnect@1700000 { compatible = "qcom,sdm845-aggre2-noc"; reg = <0 0x01700000 0 0x1f300>; - #interconnect-cells = <1>; + #interconnect-cells = <2>; qcom,bcm-voters = <&apps_bcm_voter>; }; mmss_noc: interconnect@1740000 { compatible = "qcom,sdm845-mmss-noc"; reg = <0 0x01740000 0 0x1c100>; - #interconnect-cells = <1>; + #interconnect-cells = <2>; qcom,bcm-voters = <&apps_bcm_voter>; }; @@ -2156,8 +2156,8 @@ ipa: ipa@1e40000 { clocks = <&rpmhcc RPMH_IPA_CLK>; clock-names = "core"; - interconnects = <&aggre2_noc MASTER_IPA &mem_noc SLAVE_EBI1>, - <&aggre2_noc MASTER_IPA &system_noc SLAVE_IMEM>, + interconnects = <&aggre2_noc MASTER_IPA 0 &mem_noc SLAVE_EBI1 0>, + <&aggre2_noc MASTER_IPA 0 &system_noc SLAVE_IMEM 0>, <&gladiator_noc MASTER_APPSS_PROC &config_noc SLAVE_IPA_CFG>; interconnect-names = "memory", "imem", @@ -3561,8 +3561,8 @@ usb_1: usb@a6f8800 { resets = <&gcc GCC_USB30_PRIM_BCR>; - interconnects = <&aggre2_noc MASTER_USB3_0 &mem_noc SLAVE_EBI1>, - <&gladiator_noc MASTER_APPSS_PROC &config_noc SLAVE_USB3_0>; + interconnects = <&aggre2_noc MASTER_USB3_0 0 &mem_noc SLAVE_EBI1 0>, + <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_USB3_0 0>; interconnect-names = "usb-ddr", "apps-usb"; usb_1_dwc3: dwc3@a600000 { @@ -3609,8 +3609,8 @@ usb_2: usb@a8f8800 { resets = <&gcc GCC_USB30_SEC_BCR>; - interconnects = <&aggre2_noc MASTER_USB3_1 &mem_noc SLAVE_EBI1>, - <&gladiator_noc MASTER_APPSS_PROC &config_noc SLAVE_USB3_1>; + interconnects = <&aggre2_noc MASTER_USB3_1 0 &mem_noc SLAVE_EBI1 0>, + <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_USB3_1 0>; interconnect-names = "usb-ddr", "apps-usb"; usb_2_dwc3: dwc3@a800000 { @@ -4306,7 +4306,7 @@ lpasscc: clock-controller@17014000 { gladiator_noc: interconnect@17900000 { compatible = "qcom,sdm845-gladiator-noc"; reg = <0 0x17900000 0 0xd080>; - #interconnect-cells = <1>; + #interconnect-cells = <2>; qcom,bcm-voters = <&apps_bcm_voter>; }; From patchwork Thu Aug 6 16:31:25 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Georgi Djakov X-Patchwork-Id: 11703745 Return-Path: Received: from mail.kernel.org (pdx-korg-mail-1.web.codeaurora.org [172.30.200.123]) by pdx-korg-patchwork-2.web.codeaurora.org (Postfix) with ESMTP id 39B5D138C for ; Thu, 6 Aug 2020 17:49:28 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by mail.kernel.org (Postfix) with ESMTP id 997F5221E2 for ; Thu, 6 Aug 2020 17:49:28 +0000 (UTC) Authentication-Results: mail.kernel.org; dkim=pass (2048-bit key) header.d=linaro.org header.i=@linaro.org header.b="EsdDtrFj" Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1728688AbgHFQe0 (ORCPT ); Thu, 6 Aug 2020 12:34:26 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:40160 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1727990AbgHFQcl (ORCPT ); Thu, 6 Aug 2020 12:32:41 -0400 Received: from mail-wm1-x342.google.com (mail-wm1-x342.google.com [IPv6:2a00:1450:4864:20::342]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 047D0C02B8CB for ; Thu, 6 Aug 2020 09:31:40 -0700 (PDT) Received: by mail-wm1-x342.google.com with SMTP id k20so10269098wmi.5 for ; Thu, 06 Aug 2020 09:31:39 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=linaro.org; s=google; h=from:to:cc:subject:date:message-id:in-reply-to:references :mime-version:content-transfer-encoding; bh=dKzq9Wd5pDbV7/549EiQnkURmwLmMM//csWdIgiebW8=; b=EsdDtrFjKUuP/BZmW1CY5RL5QUtFRm/t/YE3QvhQTdrk+YOX9tnzBC0latfyhTZ9qs 8KVYxu0ZlruiLUWI7IrSEYLEbcvX+H/yQUkSk56XHjCmwPye4lptZc3A7zxEL3YVLafU OItNjT8dnLBMs0XhcMFYcZq0GiyQomjZYUiQo48M2GPS2efmgAiiNfAYw12pXJAJJ96X 2tCA1N8q8YLHEMMZIlbGu516lKAlTucgsDZIpq8USikP4h2IQNYQSF7mBkp9UXgGBJbe 6wIk2DN0bfrxIP8fSAAqEcW/aCl+LyJurk/yEfc9Mup+DUwPz5A9aJpNxU1+fE54GMHT T+Wg== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20161025; h=x-gm-message-state:from:to:cc:subject:date:message-id:in-reply-to :references:mime-version:content-transfer-encoding; bh=dKzq9Wd5pDbV7/549EiQnkURmwLmMM//csWdIgiebW8=; b=Pa0B5FdvWBzKaH1sLJ3XJr1c6PcWsa9JQWSKPAYT0ugi1wGPApz5QbGYwANeEKqbjZ 5iTyWnKO3sHOYRdYCcI9F948cdeEx1vw6Lxkz/vb6JbdPCNQrNsfiSKbdoDfkhwmgQR8 7FLdhy0f0cnPHS94nrLDCqRl+hmDO30surS7XkMpn+iPMA87oEgyTIfguoAS3lh4kDGy X6H7qI+Hc8PbhXZRLK0POsWhg94F5tl7O0AIEbea2MyVzOBmxwyP9qACbUp8ALC+QIWV 4ZHYAVlQ1mNIXGg2jRj0iey042t+/RKhpr1cQl/Xruck0Qy/jG9MpBOBwZwGbiKIuIyM tSkg== X-Gm-Message-State: AOAM531BzQW2JnTYqH+EezL8CBvaB9gEwmpgp2xEko7X65WCdoy56FCX RgwcDK1YMaty6xCG3l8/5XShhUNNpUs= X-Google-Smtp-Source: ABdhPJxZbZm/odYmDQ8DR2AOCKo6562W7Nk3ONEMqBOj1UV79/ieFMlhXi0Nu7sq8tAmdAKGm7E9jg== X-Received: by 2002:a1c:18b:: with SMTP id 133mr8721197wmb.178.1596731498457; Thu, 06 Aug 2020 09:31:38 -0700 (PDT) Received: from localhost.localdomain ([87.120.218.65]) by smtp.googlemail.com with ESMTPSA id i66sm7468537wma.35.2020.08.06.09.31.37 (version=TLS1_2 cipher=ECDHE-ECDSA-AES128-GCM-SHA256 bits=128/128); Thu, 06 Aug 2020 09:31:37 -0700 (PDT) From: Georgi Djakov To: linux-pm@vger.kernel.org, devicetree@vger.kernel.org Cc: robh+dt@kernel.org, bjorn.andersson@linaro.org, sibis@codeaurora.org, mka@chromium.org, dianders@chromium.org, georgi.djakov@linaro.org, linux-kernel@vger.kernel.org Subject: [PATCH v2 6/7] interconnect: qcom: sc7180: Replace xlate with xlate_extended Date: Thu, 6 Aug 2020 19:31:25 +0300 Message-Id: <20200806163126.22667-7-georgi.djakov@linaro.org> X-Mailer: git-send-email 2.27.0 In-Reply-To: <20200806163126.22667-1-georgi.djakov@linaro.org> References: <20200806163126.22667-1-georgi.djakov@linaro.org> MIME-Version: 1.0 Sender: linux-pm-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-pm@vger.kernel.org From: Sibi Sankar Use the qcom_icc_xlate_extended() in order to parse tags, that are specified as an additional arguments to the path endpoints in DT. Signed-off-by: Sibi Sankar Tested-by: Matthias Kaehlcke Reviewed-by: Matthias Kaehlcke Signed-off-by: Georgi Djakov --- drivers/interconnect/qcom/sc7180.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/interconnect/qcom/sc7180.c b/drivers/interconnect/qcom/sc7180.c index dcf493d07928..a6f119f363b1 100644 --- a/drivers/interconnect/qcom/sc7180.c +++ b/drivers/interconnect/qcom/sc7180.c @@ -535,7 +535,7 @@ static int qnoc_probe(struct platform_device *pdev) provider->set = qcom_icc_set; provider->pre_aggregate = qcom_icc_pre_aggregate; provider->aggregate = qcom_icc_aggregate; - provider->xlate = of_icc_xlate_onecell; + provider->xlate_extended = qcom_icc_xlate_extended; INIT_LIST_HEAD(&provider->nodes); provider->data = data; From patchwork Thu Aug 6 16:31:26 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Georgi Djakov X-Patchwork-Id: 11703503 Return-Path: Received: from mail.kernel.org (pdx-korg-mail-1.web.codeaurora.org [172.30.200.123]) by pdx-korg-patchwork-2.web.codeaurora.org (Postfix) with ESMTP id 24554138C for ; Thu, 6 Aug 2020 16:34:07 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by mail.kernel.org (Postfix) with ESMTP id 6749B204FD for ; Thu, 6 Aug 2020 16:34:07 +0000 (UTC) Authentication-Results: mail.kernel.org; dkim=pass (2048-bit key) header.d=linaro.org header.i=@linaro.org header.b="aIa+XZ8f" Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1728714AbgHFQeA (ORCPT ); Thu, 6 Aug 2020 12:34:00 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:40180 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1728698AbgHFQcu (ORCPT ); Thu, 6 Aug 2020 12:32:50 -0400 Received: from mail-wm1-x343.google.com (mail-wm1-x343.google.com [IPv6:2a00:1450:4864:20::343]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 2C2FFC02B8CE for ; Thu, 6 Aug 2020 09:31:42 -0700 (PDT) Received: by mail-wm1-x343.google.com with SMTP id t14so10280587wmi.3 for ; Thu, 06 Aug 2020 09:31:42 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=linaro.org; s=google; h=from:to:cc:subject:date:message-id:in-reply-to:references :mime-version:content-transfer-encoding; bh=o1DNwHTB2pSgb5a7fFbiP5awwGwo+okHpDOnTZRVZoI=; b=aIa+XZ8fqPjIS9AouQP4eiN4SFZhfXTUOkTrRD1FPOJ4S5MkJfuK2bwzAKaFLrMzTj Nsvdy3JqD3GuQbemBxQJR7fhGd7iPv3Mppe1AuP588yc/DHwIE4W00EYQOmUVxlO9kHm 0XrPl1B5X2QP7zCwdlr4ArJeHM3mPuA24r6zYSXa2XyObeRsGSOKEVvR1VuRVpwDBhn/ AruTKO7OjaSFU5PncM9pz0zcPTqJ8CxQ2Hft9JhtXdW0HKZvmztaYNIZjx/3cfCO+9FN 7fOk7iFciV8t6+r904epPXA/fpFnuYCa17zSgLLoLWolIHXBTeRys84lw418k9XwOf8Y Z0PA== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20161025; h=x-gm-message-state:from:to:cc:subject:date:message-id:in-reply-to :references:mime-version:content-transfer-encoding; bh=o1DNwHTB2pSgb5a7fFbiP5awwGwo+okHpDOnTZRVZoI=; b=pALi+elYhc3CnzNBY5zwgZNCZpDfoytO+sYIXscEPaZRqib2SQI1lV3DFojyzWagr4 wbjlim4RrfxHbIlpIrVB1vUvDEVe22PWI5rv0rYcWBFF+F1LBNtjaoe8XmLY6KybXgp/ kZ1hIzbNz2YYCnNb07d7cgoVoQ5ZzGZpRxGvg/H/KbxuCfx/cJB38FhustfGOOL+lUWy /1N3TWjZGsYip96hQNPYUnym6naLPpUajNKHaOkEZKJOZnPvzojVF2uI9Y0Tks1t+iwT mkMUHU6LrP9SHfjP5PsV1fqhZ/j0nXKd0svplBxkanKCL+0HRQO3Dy7pvezjLiCbLFLw rOUQ== X-Gm-Message-State: AOAM531YCFzLzxtnBnpkONDo6fCs+Oyxsa78456JnKzgQpsirdqVk4+z eqrYFSPp7+Q50+zmj/mIq76c7uN2Qc0= X-Google-Smtp-Source: ABdhPJyLvwNgomKblok9MgnNW4QDS+6bTNt98cxnKLNyNI5ssODvfWe7+i/O/u82e+Gkz18HqycWGA== X-Received: by 2002:a1c:ba84:: with SMTP id k126mr9225917wmf.55.1596731500024; Thu, 06 Aug 2020 09:31:40 -0700 (PDT) Received: from localhost.localdomain ([87.120.218.65]) by smtp.googlemail.com with ESMTPSA id i66sm7468537wma.35.2020.08.06.09.31.38 (version=TLS1_2 cipher=ECDHE-ECDSA-AES128-GCM-SHA256 bits=128/128); Thu, 06 Aug 2020 09:31:39 -0700 (PDT) From: Georgi Djakov To: linux-pm@vger.kernel.org, devicetree@vger.kernel.org Cc: robh+dt@kernel.org, bjorn.andersson@linaro.org, sibis@codeaurora.org, mka@chromium.org, dianders@chromium.org, georgi.djakov@linaro.org, linux-kernel@vger.kernel.org Subject: [PATCH v2 7/7] arm64: dts: qcom: sc7180: Increase the number of interconnect cells Date: Thu, 6 Aug 2020 19:31:26 +0300 Message-Id: <20200806163126.22667-8-georgi.djakov@linaro.org> X-Mailer: git-send-email 2.27.0 In-Reply-To: <20200806163126.22667-1-georgi.djakov@linaro.org> References: <20200806163126.22667-1-georgi.djakov@linaro.org> MIME-Version: 1.0 Sender: linux-pm-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-pm@vger.kernel.org From: Sibi Sankar Increase the number of interconnect-cells, as now we can include the tag information. The consumers can specify the path tag as an additional argument to the endpoints. Signed-off-by: Sibi Sankar Tested-by: Matthias Kaehlcke Reviewed-by: Matthias Kaehlcke Signed-off-by: Georgi Djakov --- arch/arm64/boot/dts/qcom/sc7180.dtsi | 216 +++++++++++++-------------- 1 file changed, 108 insertions(+), 108 deletions(-) diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi b/arch/arm64/boot/dts/qcom/sc7180.dtsi index 16df08d9ef8f..fe80e1b8acee 100644 --- a/arch/arm64/boot/dts/qcom/sc7180.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi @@ -132,7 +132,7 @@ &LITTLE_CPU_SLEEP_1 capacity-dmips-mhz = <1024>; dynamic-power-coefficient = <100>; operating-points-v2 = <&cpu0_opp_table>; - interconnects = <&gem_noc MASTER_APPSS_PROC &mc_virt SLAVE_EBI1>, + interconnects = <&gem_noc MASTER_APPSS_PROC 3 &mc_virt SLAVE_EBI1 3>, <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>; next-level-cache = <&L2_0>; #cooling-cells = <2>; @@ -158,7 +158,7 @@ &LITTLE_CPU_SLEEP_1 dynamic-power-coefficient = <100>; next-level-cache = <&L2_100>; operating-points-v2 = <&cpu0_opp_table>; - interconnects = <&gem_noc MASTER_APPSS_PROC &mc_virt SLAVE_EBI1>, + interconnects = <&gem_noc MASTER_APPSS_PROC 3 &mc_virt SLAVE_EBI1 3>, <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>; #cooling-cells = <2>; qcom,freq-domain = <&cpufreq_hw 0>; @@ -180,7 +180,7 @@ &LITTLE_CPU_SLEEP_1 dynamic-power-coefficient = <100>; next-level-cache = <&L2_200>; operating-points-v2 = <&cpu0_opp_table>; - interconnects = <&gem_noc MASTER_APPSS_PROC &mc_virt SLAVE_EBI1>, + interconnects = <&gem_noc MASTER_APPSS_PROC 3 &mc_virt SLAVE_EBI1 3>, <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>; #cooling-cells = <2>; qcom,freq-domain = <&cpufreq_hw 0>; @@ -202,7 +202,7 @@ &LITTLE_CPU_SLEEP_1 dynamic-power-coefficient = <100>; next-level-cache = <&L2_300>; operating-points-v2 = <&cpu0_opp_table>; - interconnects = <&gem_noc MASTER_APPSS_PROC &mc_virt SLAVE_EBI1>, + interconnects = <&gem_noc MASTER_APPSS_PROC 3 &mc_virt SLAVE_EBI1 3>, <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>; #cooling-cells = <2>; qcom,freq-domain = <&cpufreq_hw 0>; @@ -224,7 +224,7 @@ &LITTLE_CPU_SLEEP_1 dynamic-power-coefficient = <100>; next-level-cache = <&L2_400>; operating-points-v2 = <&cpu0_opp_table>; - interconnects = <&gem_noc MASTER_APPSS_PROC &mc_virt SLAVE_EBI1>, + interconnects = <&gem_noc MASTER_APPSS_PROC 3 &mc_virt SLAVE_EBI1 3>, <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>; #cooling-cells = <2>; qcom,freq-domain = <&cpufreq_hw 0>; @@ -246,7 +246,7 @@ &LITTLE_CPU_SLEEP_1 dynamic-power-coefficient = <100>; next-level-cache = <&L2_500>; operating-points-v2 = <&cpu0_opp_table>; - interconnects = <&gem_noc MASTER_APPSS_PROC &mc_virt SLAVE_EBI1>, + interconnects = <&gem_noc MASTER_APPSS_PROC 3 &mc_virt SLAVE_EBI1 3>, <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>; #cooling-cells = <2>; qcom,freq-domain = <&cpufreq_hw 0>; @@ -268,7 +268,7 @@ &BIG_CPU_SLEEP_1 dynamic-power-coefficient = <405>; next-level-cache = <&L2_600>; operating-points-v2 = <&cpu6_opp_table>; - interconnects = <&gem_noc MASTER_APPSS_PROC &mc_virt SLAVE_EBI1>, + interconnects = <&gem_noc MASTER_APPSS_PROC 3 &mc_virt SLAVE_EBI1 3>, <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>; #cooling-cells = <2>; qcom,freq-domain = <&cpufreq_hw 1>; @@ -290,7 +290,7 @@ &BIG_CPU_SLEEP_1 dynamic-power-coefficient = <405>; next-level-cache = <&L2_700>; operating-points-v2 = <&cpu6_opp_table>; - interconnects = <&gem_noc MASTER_APPSS_PROC &mc_virt SLAVE_EBI1>, + interconnects = <&gem_noc MASTER_APPSS_PROC 3 &mc_virt SLAVE_EBI1 3>, <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>; #cooling-cells = <2>; qcom,freq-domain = <&cpufreq_hw 1>; @@ -742,7 +742,7 @@ qupv3_id_0: geniqup@8c0000 { #size-cells = <2>; ranges; iommus = <&apps_smmu 0x43 0x0>; - interconnects = <&qup_virt MASTER_QUP_CORE_0 &qup_virt SLAVE_QUP_CORE_0>; + interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>; interconnect-names = "qup-core"; status = "disabled"; @@ -756,9 +756,9 @@ i2c0: i2c@880000 { interrupts = ; #address-cells = <1>; #size-cells = <0>; - interconnects = <&qup_virt MASTER_QUP_CORE_0 &qup_virt SLAVE_QUP_CORE_0>, - <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_0>, - <&aggre1_noc MASTER_QUP_0 &mc_virt SLAVE_EBI1>; + interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>, + <&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; status = "disabled"; @@ -776,8 +776,8 @@ spi0: spi@880000 { #size-cells = <0>; power-domains = <&rpmhpd SC7180_CX>; operating-points-v2 = <&qup_opp_table>; - interconnects = <&qup_virt MASTER_QUP_CORE_0 &qup_virt SLAVE_QUP_CORE_0>, - <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_0>; + interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>; interconnect-names = "qup-core", "qup-config"; status = "disabled"; }; @@ -792,8 +792,8 @@ uart0: serial@880000 { interrupts = ; power-domains = <&rpmhpd SC7180_CX>; operating-points-v2 = <&qup_opp_table>; - interconnects = <&qup_virt MASTER_QUP_CORE_0 &qup_virt SLAVE_QUP_CORE_0>, - <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_0>; + interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>; interconnect-names = "qup-core", "qup-config"; status = "disabled"; }; @@ -808,9 +808,9 @@ i2c1: i2c@884000 { interrupts = ; #address-cells = <1>; #size-cells = <0>; - interconnects = <&qup_virt MASTER_QUP_CORE_0 &qup_virt SLAVE_QUP_CORE_0>, - <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_0>, - <&aggre1_noc MASTER_QUP_0 &mc_virt SLAVE_EBI1>; + interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>, + <&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; status = "disabled"; @@ -828,8 +828,8 @@ spi1: spi@884000 { #size-cells = <0>; power-domains = <&rpmhpd SC7180_CX>; operating-points-v2 = <&qup_opp_table>; - interconnects = <&qup_virt MASTER_QUP_CORE_0 &qup_virt SLAVE_QUP_CORE_0>, - <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_0>; + interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>; interconnect-names = "qup-core", "qup-config"; status = "disabled"; }; @@ -844,8 +844,8 @@ uart1: serial@884000 { interrupts = ; power-domains = <&rpmhpd SC7180_CX>; operating-points-v2 = <&qup_opp_table>; - interconnects = <&qup_virt MASTER_QUP_CORE_0 &qup_virt SLAVE_QUP_CORE_0>, - <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_0>; + interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>; interconnect-names = "qup-core", "qup-config"; status = "disabled"; }; @@ -860,9 +860,9 @@ i2c2: i2c@888000 { interrupts = ; #address-cells = <1>; #size-cells = <0>; - interconnects = <&qup_virt MASTER_QUP_CORE_0 &qup_virt SLAVE_QUP_CORE_0>, - <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_0>, - <&aggre1_noc MASTER_QUP_0 &mc_virt SLAVE_EBI1>; + interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>, + <&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; status = "disabled"; @@ -878,8 +878,8 @@ uart2: serial@888000 { interrupts = ; power-domains = <&rpmhpd SC7180_CX>; operating-points-v2 = <&qup_opp_table>; - interconnects = <&qup_virt MASTER_QUP_CORE_0 &qup_virt SLAVE_QUP_CORE_0>, - <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_0>; + interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>; interconnect-names = "qup-core", "qup-config"; status = "disabled"; }; @@ -894,9 +894,9 @@ i2c3: i2c@88c000 { interrupts = ; #address-cells = <1>; #size-cells = <0>; - interconnects = <&qup_virt MASTER_QUP_CORE_0 &qup_virt SLAVE_QUP_CORE_0>, - <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_0>, - <&aggre1_noc MASTER_QUP_0 &mc_virt SLAVE_EBI1>; + interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>, + <&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; status = "disabled"; @@ -914,8 +914,8 @@ spi3: spi@88c000 { #size-cells = <0>; power-domains = <&rpmhpd SC7180_CX>; operating-points-v2 = <&qup_opp_table>; - interconnects = <&qup_virt MASTER_QUP_CORE_0 &qup_virt SLAVE_QUP_CORE_0>, - <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_0>; + interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>; interconnect-names = "qup-core", "qup-config"; status = "disabled"; }; @@ -930,8 +930,8 @@ uart3: serial@88c000 { interrupts = ; power-domains = <&rpmhpd SC7180_CX>; operating-points-v2 = <&qup_opp_table>; - interconnects = <&qup_virt MASTER_QUP_CORE_0 &qup_virt SLAVE_QUP_CORE_0>, - <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_0>; + interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>; interconnect-names = "qup-core", "qup-config"; status = "disabled"; }; @@ -946,9 +946,9 @@ i2c4: i2c@890000 { interrupts = ; #address-cells = <1>; #size-cells = <0>; - interconnects = <&qup_virt MASTER_QUP_CORE_0 &qup_virt SLAVE_QUP_CORE_0>, - <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_0>, - <&aggre1_noc MASTER_QUP_0 &mc_virt SLAVE_EBI1>; + interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>, + <&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; status = "disabled"; @@ -964,8 +964,8 @@ uart4: serial@890000 { interrupts = ; power-domains = <&rpmhpd SC7180_CX>; operating-points-v2 = <&qup_opp_table>; - interconnects = <&qup_virt MASTER_QUP_CORE_0 &qup_virt SLAVE_QUP_CORE_0>, - <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_0>; + interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>; interconnect-names = "qup-core", "qup-config"; status = "disabled"; }; @@ -980,9 +980,9 @@ i2c5: i2c@894000 { interrupts = ; #address-cells = <1>; #size-cells = <0>; - interconnects = <&qup_virt MASTER_QUP_CORE_0 &qup_virt SLAVE_QUP_CORE_0>, - <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_0>, - <&aggre1_noc MASTER_QUP_0 &mc_virt SLAVE_EBI1>; + interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>, + <&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; status = "disabled"; @@ -1000,8 +1000,8 @@ spi5: spi@894000 { #size-cells = <0>; power-domains = <&rpmhpd SC7180_CX>; operating-points-v2 = <&qup_opp_table>; - interconnects = <&qup_virt MASTER_QUP_CORE_0 &qup_virt SLAVE_QUP_CORE_0>, - <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_0>; + interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>; interconnect-names = "qup-core", "qup-config"; status = "disabled"; }; @@ -1016,8 +1016,8 @@ uart5: serial@894000 { interrupts = ; power-domains = <&rpmhpd SC7180_CX>; operating-points-v2 = <&qup_opp_table>; - interconnects = <&qup_virt MASTER_QUP_CORE_0 &qup_virt SLAVE_QUP_CORE_0>, - <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_0>; + interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>; interconnect-names = "qup-core", "qup-config"; status = "disabled"; }; @@ -1033,7 +1033,7 @@ qupv3_id_1: geniqup@ac0000 { #size-cells = <2>; ranges; iommus = <&apps_smmu 0x4c3 0x0>; - interconnects = <&qup_virt MASTER_QUP_CORE_1 &qup_virt SLAVE_QUP_CORE_1>; + interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>; interconnect-names = "qup-core"; status = "disabled"; @@ -1047,9 +1047,9 @@ i2c6: i2c@a80000 { interrupts = ; #address-cells = <1>; #size-cells = <0>; - interconnects = <&qup_virt MASTER_QUP_CORE_1 &qup_virt SLAVE_QUP_CORE_1>, - <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_1>, - <&aggre2_noc MASTER_QUP_1 &mc_virt SLAVE_EBI1>; + interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>, + <&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; status = "disabled"; @@ -1067,8 +1067,8 @@ spi6: spi@a80000 { #size-cells = <0>; power-domains = <&rpmhpd SC7180_CX>; operating-points-v2 = <&qup_opp_table>; - interconnects = <&qup_virt MASTER_QUP_CORE_1 &qup_virt SLAVE_QUP_CORE_1>, - <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_1>; + interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>; interconnect-names = "qup-core", "qup-config"; status = "disabled"; }; @@ -1083,8 +1083,8 @@ uart6: serial@a80000 { interrupts = ; power-domains = <&rpmhpd SC7180_CX>; operating-points-v2 = <&qup_opp_table>; - interconnects = <&qup_virt MASTER_QUP_CORE_1 &qup_virt SLAVE_QUP_CORE_1>, - <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_1>; + interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>; interconnect-names = "qup-core", "qup-config"; status = "disabled"; }; @@ -1099,9 +1099,9 @@ i2c7: i2c@a84000 { interrupts = ; #address-cells = <1>; #size-cells = <0>; - interconnects = <&qup_virt MASTER_QUP_CORE_1 &qup_virt SLAVE_QUP_CORE_1>, - <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_1>, - <&aggre2_noc MASTER_QUP_1 &mc_virt SLAVE_EBI1>; + interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>, + <&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; status = "disabled"; @@ -1117,8 +1117,8 @@ uart7: serial@a84000 { interrupts = ; power-domains = <&rpmhpd SC7180_CX>; operating-points-v2 = <&qup_opp_table>; - interconnects = <&qup_virt MASTER_QUP_CORE_1 &qup_virt SLAVE_QUP_CORE_1>, - <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_1>; + interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>; interconnect-names = "qup-core", "qup-config"; status = "disabled"; }; @@ -1133,9 +1133,9 @@ i2c8: i2c@a88000 { interrupts = ; #address-cells = <1>; #size-cells = <0>; - interconnects = <&qup_virt MASTER_QUP_CORE_1 &qup_virt SLAVE_QUP_CORE_1>, - <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_1>, - <&aggre2_noc MASTER_QUP_1 &mc_virt SLAVE_EBI1>; + interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>, + <&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; status = "disabled"; @@ -1153,8 +1153,8 @@ spi8: spi@a88000 { #size-cells = <0>; power-domains = <&rpmhpd SC7180_CX>; operating-points-v2 = <&qup_opp_table>; - interconnects = <&qup_virt MASTER_QUP_CORE_1 &qup_virt SLAVE_QUP_CORE_1>, - <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_1>; + interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>; interconnect-names = "qup-core", "qup-config"; status = "disabled"; }; @@ -1169,8 +1169,8 @@ uart8: serial@a88000 { interrupts = ; power-domains = <&rpmhpd SC7180_CX>; operating-points-v2 = <&qup_opp_table>; - interconnects = <&qup_virt MASTER_QUP_CORE_1 &qup_virt SLAVE_QUP_CORE_1>, - <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_1>; + interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>; interconnect-names = "qup-core", "qup-config"; status = "disabled"; }; @@ -1185,9 +1185,9 @@ i2c9: i2c@a8c000 { interrupts = ; #address-cells = <1>; #size-cells = <0>; - interconnects = <&qup_virt MASTER_QUP_CORE_1 &qup_virt SLAVE_QUP_CORE_1>, - <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_1>, - <&aggre2_noc MASTER_QUP_1 &mc_virt SLAVE_EBI1>; + interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>, + <&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; status = "disabled"; @@ -1203,8 +1203,8 @@ uart9: serial@a8c000 { interrupts = ; power-domains = <&rpmhpd SC7180_CX>; operating-points-v2 = <&qup_opp_table>; - interconnects = <&qup_virt MASTER_QUP_CORE_1 &qup_virt SLAVE_QUP_CORE_1>, - <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_1>; + interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>; interconnect-names = "qup-core", "qup-config"; status = "disabled"; }; @@ -1219,9 +1219,9 @@ i2c10: i2c@a90000 { interrupts = ; #address-cells = <1>; #size-cells = <0>; - interconnects = <&qup_virt MASTER_QUP_CORE_1 &qup_virt SLAVE_QUP_CORE_1>, - <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_1>, - <&aggre2_noc MASTER_QUP_1 &mc_virt SLAVE_EBI1>; + interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>, + <&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; status = "disabled"; @@ -1239,8 +1239,8 @@ spi10: spi@a90000 { #size-cells = <0>; power-domains = <&rpmhpd SC7180_CX>; operating-points-v2 = <&qup_opp_table>; - interconnects = <&qup_virt MASTER_QUP_CORE_1 &qup_virt SLAVE_QUP_CORE_1>, - <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_1>; + interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>; interconnect-names = "qup-core", "qup-config"; status = "disabled"; }; @@ -1255,8 +1255,8 @@ uart10: serial@a90000 { interrupts = ; power-domains = <&rpmhpd SC7180_CX>; operating-points-v2 = <&qup_opp_table>; - interconnects = <&qup_virt MASTER_QUP_CORE_1 &qup_virt SLAVE_QUP_CORE_1>, - <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_1>; + interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>; interconnect-names = "qup-core", "qup-config"; status = "disabled"; }; @@ -1271,9 +1271,9 @@ i2c11: i2c@a94000 { interrupts = ; #address-cells = <1>; #size-cells = <0>; - interconnects = <&qup_virt MASTER_QUP_CORE_1 &qup_virt SLAVE_QUP_CORE_1>, - <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_1>, - <&aggre2_noc MASTER_QUP_1 &mc_virt SLAVE_EBI1>; + interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>, + <&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; status = "disabled"; @@ -1291,8 +1291,8 @@ spi11: spi@a94000 { #size-cells = <0>; power-domains = <&rpmhpd SC7180_CX>; operating-points-v2 = <&qup_opp_table>; - interconnects = <&qup_virt MASTER_QUP_CORE_1 &qup_virt SLAVE_QUP_CORE_1>, - <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_1>; + interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>; interconnect-names = "qup-core", "qup-config"; status = "disabled"; }; @@ -1307,8 +1307,8 @@ uart11: serial@a94000 { interrupts = ; power-domains = <&rpmhpd SC7180_CX>; operating-points-v2 = <&qup_opp_table>; - interconnects = <&qup_virt MASTER_QUP_CORE_1 &qup_virt SLAVE_QUP_CORE_1>, - <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_1>; + interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>; interconnect-names = "qup-core", "qup-config"; status = "disabled"; }; @@ -1317,63 +1317,63 @@ uart11: serial@a94000 { config_noc: interconnect@1500000 { compatible = "qcom,sc7180-config-noc"; reg = <0 0x01500000 0 0x28000>; - #interconnect-cells = <1>; + #interconnect-cells = <2>; qcom,bcm-voters = <&apps_bcm_voter>; }; system_noc: interconnect@1620000 { compatible = "qcom,sc7180-system-noc"; reg = <0 0x01620000 0 0x17080>; - #interconnect-cells = <1>; + #interconnect-cells = <2>; qcom,bcm-voters = <&apps_bcm_voter>; }; mc_virt: interconnect@1638000 { compatible = "qcom,sc7180-mc-virt"; reg = <0 0x01638000 0 0x1000>; - #interconnect-cells = <1>; + #interconnect-cells = <2>; qcom,bcm-voters = <&apps_bcm_voter>; }; qup_virt: interconnect@1650000 { compatible = "qcom,sc7180-qup-virt"; reg = <0 0x01650000 0 0x1000>; - #interconnect-cells = <1>; + #interconnect-cells = <2>; qcom,bcm-voters = <&apps_bcm_voter>; }; aggre1_noc: interconnect@16e0000 { compatible = "qcom,sc7180-aggre1-noc"; reg = <0 0x016e0000 0 0x15080>; - #interconnect-cells = <1>; + #interconnect-cells = <2>; qcom,bcm-voters = <&apps_bcm_voter>; }; aggre2_noc: interconnect@1705000 { compatible = "qcom,sc7180-aggre2-noc"; reg = <0 0x01705000 0 0x9000>; - #interconnect-cells = <1>; + #interconnect-cells = <2>; qcom,bcm-voters = <&apps_bcm_voter>; }; compute_noc: interconnect@170e000 { compatible = "qcom,sc7180-compute-noc"; reg = <0 0x0170e000 0 0x6000>; - #interconnect-cells = <1>; + #interconnect-cells = <2>; qcom,bcm-voters = <&apps_bcm_voter>; }; mmss_noc: interconnect@1740000 { compatible = "qcom,sc7180-mmss-noc"; reg = <0 0x01740000 0 0x1c100>; - #interconnect-cells = <1>; + #interconnect-cells = <2>; qcom,bcm-voters = <&apps_bcm_voter>; }; ipa_virt: interconnect@1e00000 { compatible = "qcom,sc7180-ipa-virt"; reg = <0 0x01e00000 0 0x1000>; - #interconnect-cells = <1>; + #interconnect-cells = <2>; qcom,bcm-voters = <&apps_bcm_voter>; }; @@ -1400,9 +1400,9 @@ ipa: ipa@1e40000 { clocks = <&rpmhcc RPMH_IPA_CLK>; clock-names = "core"; - interconnects = <&aggre2_noc MASTER_IPA &mc_virt SLAVE_EBI1>, - <&aggre2_noc MASTER_IPA &system_noc SLAVE_IMEM>, - <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_IPA_CFG>; + interconnects = <&aggre2_noc MASTER_IPA 0 &mc_virt SLAVE_EBI1 0>, + <&aggre2_noc MASTER_IPA 0 &system_noc SLAVE_IMEM 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_IPA_CFG 0>; interconnect-names = "memory", "imem", "config"; @@ -2526,8 +2526,8 @@ qspi: spi@88dc000 { clocks = <&gcc GCC_QSPI_CNOC_PERIPH_AHB_CLK>, <&gcc GCC_QSPI_CORE_CLK>; clock-names = "iface", "core"; - interconnects = <&gem_noc MASTER_APPSS_PROC - &config_noc SLAVE_QSPI_0>; + interconnects = <&gem_noc MASTER_APPSS_PROC 0 + &config_noc SLAVE_QSPI_0 0>; interconnect-names = "qspi-config"; power-domains = <&rpmhpd SC7180_CX>; operating-points-v2 = <&qspi_opp_table>; @@ -2586,7 +2586,7 @@ usb_1_ssphy: phy@88e9200 { dc_noc: interconnect@9160000 { compatible = "qcom,sc7180-dc-noc"; reg = <0 0x09160000 0 0x03200>; - #interconnect-cells = <1>; + #interconnect-cells = <2>; qcom,bcm-voters = <&apps_bcm_voter>; }; @@ -2600,14 +2600,14 @@ system-cache-controller@9200000 { gem_noc: interconnect@9680000 { compatible = "qcom,sc7180-gem-noc"; reg = <0 0x09680000 0 0x3e200>; - #interconnect-cells = <1>; + #interconnect-cells = <2>; qcom,bcm-voters = <&apps_bcm_voter>; }; npu_noc: interconnect@9990000 { compatible = "qcom,sc7180-npu-noc"; reg = <0 0x09990000 0 0x1600>; - #interconnect-cells = <1>; + #interconnect-cells = <2>; qcom,bcm-voters = <&apps_bcm_voter>; }; @@ -2643,8 +2643,8 @@ usb_1: usb@a6f8800 { resets = <&gcc GCC_USB30_PRIM_BCR>; - interconnects = <&aggre2_noc MASTER_USB3 &mc_virt SLAVE_EBI1>, - <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_USB3>; + interconnects = <&aggre2_noc MASTER_USB3 0 &mc_virt SLAVE_EBI1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_USB3 0>; interconnect-names = "usb-ddr", "apps-usb"; usb_1_dwc3: dwc3@a600000 { @@ -2675,8 +2675,8 @@ venus: video-codec@aa00000 { "vcodec0_core", "vcodec0_bus"; iommus = <&apps_smmu 0x0c00 0x60>; memory-region = <&venus_mem>; - interconnects = <&mmss_noc MASTER_VIDEO_P0 &mc_virt SLAVE_EBI1>, - <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_VENUS_CFG>; + interconnects = <&mmss_noc MASTER_VIDEO_P0 0 &mc_virt SLAVE_EBI1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_VENUS_CFG 0>; interconnect-names = "video-mem", "cpu-cfg"; video-decoder { @@ -2701,7 +2701,7 @@ videocc: clock-controller@ab00000 { camnoc_virt: interconnect@ac00000 { compatible = "qcom,sc7180-camnoc-virt"; reg = <0 0x0ac00000 0 0x1000>; - #interconnect-cells = <1>; + #interconnect-cells = <2>; qcom,bcm-voters = <&apps_bcm_voter>; };