From patchwork Thu Aug 13 12:48:20 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Michael Walle X-Patchwork-Id: 11712499 Return-Path: Received: from mail.kernel.org (pdx-korg-mail-1.web.codeaurora.org [172.30.200.123]) by pdx-korg-patchwork-2.web.codeaurora.org (Postfix) with ESMTP id 9B1B5109B for ; Thu, 13 Aug 2020 12:51:06 +0000 (UTC) Received: from merlin.infradead.org (merlin.infradead.org [205.233.59.134]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by mail.kernel.org (Postfix) with ESMTPS id 74B8E207DA for ; Thu, 13 Aug 2020 12:51:06 +0000 (UTC) Authentication-Results: mail.kernel.org; dkim=pass (2048-bit key) header.d=lists.infradead.org header.i=@lists.infradead.org header.b="rWMs2nPK"; dkim=fail reason="signature verification failed" (1024-bit key) header.d=walle.cc header.i=@walle.cc header.b="rwOU+opn" DMARC-Filter: OpenDMARC Filter v1.3.2 mail.kernel.org 74B8E207DA Authentication-Results: mail.kernel.org; dmarc=none (p=none dis=none) header.from=walle.cc Authentication-Results: mail.kernel.org; spf=none smtp.mailfrom=linux-arm-kernel-bounces+patchwork-linux-arm=patchwork.kernel.org@lists.infradead.org DKIM-Signature: v=1; a=rsa-sha256; q=dns/txt; c=relaxed/relaxed; d=lists.infradead.org; s=merlin.20170209; h=Sender:Content-Transfer-Encoding: Content-Type:Cc:List-Subscribe:List-Help:List-Post:List-Archive: List-Unsubscribe:List-Id:MIME-Version:References:In-Reply-To:Message-Id:Date: Subject:To:From:Reply-To:Content-ID:Content-Description:Resent-Date: Resent-From:Resent-Sender:Resent-To:Resent-Cc:Resent-Message-ID:List-Owner; bh=N/uBHeAMNZZZgiI9Q67xGFzFYZBvrzHEnRzLTr/PD4M=; b=rWMs2nPKD3GqDn5PlIF6/FE04 AAZevwHgvLwFIXb+02jYJWUEJUHhwy+bm+4uQrSCkgbJveHeEnHJwbnr6Q4LsOd1iHdsyaN8yHG+k bOy7ZizMb8WxaAJE1M0CDy2du+/v1vyObsZszYQdsocXQZRmyEfOGskqpsr0mx5lJ/muidWhrTGZe 6Pui16sYG42VkEhGtL0AFuTGi44kt7XCBFMj7ZMFY8JSlvHTo4rr6AdUXPr0Xnclmt6xcP/YY3i5e qg2EBvKcCVGbs/a8L22T1q9Wlg7Zt+uUEY9qnQPzHxLao1GZ3vIFRbIbzjLdxRREbvKWjupFcBlc4 ReNewv//Q==; Received: from localhost ([::1] helo=merlin.infradead.org) by merlin.infradead.org with esmtp (Exim 4.92.3 #3 (Red Hat Linux)) id 1k6CfM-0004Uf-QB; Thu, 13 Aug 2020 12:49:08 +0000 Received: from ssl.serverraum.org ([2a01:4f8:151:8464::1:2]) by merlin.infradead.org with esmtps (Exim 4.92.3 #3 (Red Hat Linux)) id 1k6Cf7-0004OU-SM for linux-arm-kernel@lists.infradead.org; Thu, 13 Aug 2020 12:48:57 +0000 Received: from mwalle01.sab.local. (unknown [213.135.10.150]) (using TLSv1.3 with cipher TLS_AES_256_GCM_SHA384 (256/256 bits) key-exchange ECDHE (P-384) server-signature RSA-PSS (2048 bits) server-digest SHA256) (No client certificate requested) by ssl.serverraum.org (Postfix) with ESMTPSA id E85EB22FEB; Thu, 13 Aug 2020 14:48:46 +0200 (CEST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=walle.cc; s=mail2016061301; t=1597322927; h=from:from:reply-to:subject:subject:date:date:message-id:message-id: to:to:cc:cc:mime-version:mime-version: content-transfer-encoding:content-transfer-encoding: in-reply-to:in-reply-to:references:references; bh=W3vsjuvtvKT05YvkX0b8P6sF+NlkwEsgM58H+1oBK6A=; b=rwOU+opncGQLQ8CB7DULYAEAfu7G3J8X0kNwzPp3NY2oAmvd0WSPslI3nhuZbB8DpQcz9V vpshEvLJT3yhczSeHq56ajcmcCsSA7Fg/iTG6UFbU2T1j+m0MxbgtQmqhxNWp0PQUyOAHN VhNlzng+qV5L15lPqzJXwNVV13QsL+E= From: Michael Walle To: linux-gpio@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-hwmon@vger.kernel.org, linux-pwm@vger.kernel.org, linux-watchdog@vger.kernel.org, linux-arm-kernel@lists.infradead.org Subject: [PATCH v8 01/13] mfd: add simple regmap based I2C driver Date: Thu, 13 Aug 2020 14:48:20 +0200 Message-Id: <20200813124832.17349-2-michael@walle.cc> X-Mailer: git-send-email 2.20.1 In-Reply-To: <20200813124832.17349-1-michael@walle.cc> References: <20200813124832.17349-1-michael@walle.cc> MIME-Version: 1.0 X-Spam: Yes X-CRM114-Version: 20100106-BlameMichelson ( TRE 0.8.0 (BSD) ) MR-646709E3 X-CRM114-CacheID: sfid-20200813_084854_321057_8A772433 X-CRM114-Status: GOOD ( 27.14 ) X-Spam-Score: -2.5 (--) X-Spam-Report: SpamAssassin version 3.4.4 on merlin.infradead.org summary: Content analysis details: (-2.5 points) pts rule name description ---- ---------------------- -------------------------------------------------- -2.3 RCVD_IN_DNSWL_MED RBL: Sender listed at https://www.dnswl.org/, medium trust [2a01:4f8:151:8464:0:0:1:2 listed in] [list.dnswl.org] 0.0 SPF_HELO_NONE SPF: HELO does not publish an SPF Record -0.0 SPF_PASS SPF: sender matches SPF record -0.1 DKIM_VALID_AU Message has a valid DKIM or DK signature from author's domain 0.1 DKIM_SIGNED Message has a DKIM or DK signature, not necessarily valid -0.1 DKIM_VALID Message has at least one valid DKIM or DK signature -0.1 DKIM_VALID_EF Message has a valid DKIM or DK signature from envelope-from domain X-BeenThere: linux-arm-kernel@lists.infradead.org X-Mailman-Version: 2.1.29 Precedence: list List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Cc: Marc Zyngier , Jean Delvare , Catalin Marinas , Jason Cooper , Will Deacon , Greg Kroah-Hartman , Shawn Guo , Linus Walleij , Andy Shevchenko , Li Yang , Bartosz Golaszewski , Michael Walle , Rob Herring , Thierry Reding , Mark Brown , Pavel Machek , =?utf-8?q?Uwe_Kleine-K=C3=B6nig?= , Thomas Gleixner , Wim Van Sebroeck , Lee Jones , Guenter Roeck Sender: "linux-arm-kernel" Errors-To: linux-arm-kernel-bounces+patchwork-linux-arm=patchwork.kernel.org@lists.infradead.org There are I2C devices which contain several different functions but doesn't require any special access functions. For these kind of drivers an I2C regmap should be enough. Create an I2C driver which creates an I2C regmap and enumerates its children. If a device wants to use this as its MFD core driver, it has to add an individual compatible string. It may provide its own regmap configuration. Subdevices can use dev_get_regmap() on the parent to get their regmap instance. Signed-off-by: Michael Walle --- Changes since v7: - none Changes since v6: - added SIMPLE_MFD_I2C help text - revised description in module header Changes since v5: - removed "select MFD_CORE" in Kconfig - removed help text in Kconfig, we assume that the users of this driver will have a "select MFD_SIMPLE_MFD_I2C". Instead added a small description to the driver itself. - removed "struct simple_mfd_i2c_config" and use regmap_config directly - changed builtin_i2c_driver() to module_i2c_driver(), added MODULE_ boilerplate - cleaned up the included files Changes since v4: - new patch. Lee, please bear with me. I didn't want to delay the new version (where a lot of remarks on the other patches were addressed) even more, just because we haven't figured out how to deal with the MFD part. So for now, I've included this one. drivers/mfd/Kconfig | 12 ++++++++ drivers/mfd/Makefile | 1 + drivers/mfd/simple-mfd-i2c.c | 56 ++++++++++++++++++++++++++++++++++++ 3 files changed, 69 insertions(+) create mode 100644 drivers/mfd/simple-mfd-i2c.c diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig index 33df0837ab41..6e1a38944d28 100644 --- a/drivers/mfd/Kconfig +++ b/drivers/mfd/Kconfig @@ -1162,6 +1162,18 @@ config MFD_SI476X_CORE To compile this driver as a module, choose M here: the module will be called si476x-core. +config MFD_SIMPLE_MFD_I2C + tristate + depends on I2C + select REGMAP_I2C + help + This driver creates a single register map with the intention for it + to be shared by all sub-devices. + + Once the register map has been successfully initialised, any + sub-devices represented by child nodes in Device Tree will be + subsequently registered. + config MFD_SM501 tristate "Silicon Motion SM501" depends on HAS_DMA diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile index a60e5f835283..78d24a3e7c9e 100644 --- a/drivers/mfd/Makefile +++ b/drivers/mfd/Makefile @@ -264,3 +264,4 @@ obj-$(CONFIG_MFD_STMFX) += stmfx.o obj-$(CONFIG_MFD_KHADAS_MCU) += khadas-mcu.o obj-$(CONFIG_SGI_MFD_IOC3) += ioc3.o +obj-$(CONFIG_MFD_SIMPLE_MFD_I2C) += simple-mfd-i2c.o diff --git a/drivers/mfd/simple-mfd-i2c.c b/drivers/mfd/simple-mfd-i2c.c new file mode 100644 index 000000000000..09b40ebfdf07 --- /dev/null +++ b/drivers/mfd/simple-mfd-i2c.c @@ -0,0 +1,56 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Simple MFD - I2C + * + * This driver creates a single register map with the intention for it to be + * shared by all sub-devices. Children can use their parent's device structure + * (dev.parent) in order reference it. + * + * Once the register map has been successfully initialised, any sub-devices + * represented by child nodes in Device Tree will be subsequently registered. + */ + +#include +#include +#include +#include +#include + +static const struct regmap_config simple_regmap_config = { + .reg_bits = 8, + .val_bits = 8, +}; + +static int simple_mfd_i2c_probe(struct i2c_client *i2c) +{ + const struct regmap_config *config; + struct regmap *regmap; + + config = device_get_match_data(&i2c->dev); + if (!config) + config = &simple_regmap_config; + + regmap = devm_regmap_init_i2c(i2c, config); + if (IS_ERR(regmap)) + return PTR_ERR(regmap); + + return devm_of_platform_populate(&i2c->dev); +} + +static const struct of_device_id simple_mfd_i2c_of_match[] = { + {} +}; +MODULE_DEVICE_TABLE(of, simple_mfd_i2c_of_match); + +static struct i2c_driver simple_mfd_i2c_driver = { + .probe_new = simple_mfd_i2c_probe, + .driver = { + .name = "simple-mfd-i2c", + .of_match_table = simple_mfd_i2c_of_match, + }, +}; +module_i2c_driver(simple_mfd_i2c_driver); + +MODULE_AUTHOR("Michael Walle "); +MODULE_DESCRIPTION("Simple MFD - I2C driver"); +MODULE_LICENSE("GPL v2"); From patchwork Thu Aug 13 12:48:21 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Michael Walle X-Patchwork-Id: 11712449 Return-Path: Received: from mail.kernel.org (pdx-korg-mail-1.web.codeaurora.org [172.30.200.123]) by pdx-korg-patchwork-2.web.codeaurora.org (Postfix) with ESMTP id B79B0722 for ; Thu, 13 Aug 2020 12:49:32 +0000 (UTC) Received: from merlin.infradead.org (merlin.infradead.org [205.233.59.134]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by mail.kernel.org (Postfix) with ESMTPS id 7B8F820791 for ; Thu, 13 Aug 2020 12:49:32 +0000 (UTC) Authentication-Results: mail.kernel.org; dkim=pass (2048-bit key) header.d=lists.infradead.org header.i=@lists.infradead.org header.b="Y2MkL5U9"; dkim=fail reason="signature verification failed" (1024-bit key) header.d=walle.cc header.i=@walle.cc header.b="Gxjxl4Kp" DMARC-Filter: OpenDMARC Filter v1.3.2 mail.kernel.org 7B8F820791 Authentication-Results: mail.kernel.org; dmarc=none (p=none dis=none) header.from=walle.cc Authentication-Results: mail.kernel.org; spf=none smtp.mailfrom=linux-arm-kernel-bounces+patchwork-linux-arm=patchwork.kernel.org@lists.infradead.org DKIM-Signature: v=1; a=rsa-sha256; q=dns/txt; c=relaxed/relaxed; d=lists.infradead.org; s=merlin.20170209; h=Sender:Content-Transfer-Encoding: Content-Type:Cc:List-Subscribe:List-Help:List-Post:List-Archive: List-Unsubscribe:List-Id:MIME-Version:References:In-Reply-To:Message-Id:Date: Subject:To:From:Reply-To:Content-ID:Content-Description:Resent-Date: Resent-From:Resent-Sender:Resent-To:Resent-Cc:Resent-Message-ID:List-Owner; bh=Iza4nPEtFpM53C4S757chiAc69Pn0QwuxA+3+YQJIMo=; b=Y2MkL5U9LGGH2JjTUeAeH1OhJ 3JQJdut/xpVydWOieezLx/QzmxvQUsA6oYNLKAFEZoEzAkPIIEr1RaUgIxLcbhJdO3Bv7Upu+6dS0 LQm2XZKtuu7x0Je29J3Qu6A715PFRSBIlL79+zGrP/63lPlCQb1LfOUGMcS2Z/larbyqhsJnEn0w1 0wXuOgElge+XslC1J3xTQCREq7psKwdHS26P+NOySWK82WUErY8Nt6Y1cB4A2Au1Eg6QaCSIEJ5eP XD23dtSfy1RdlhOXusFDYxKxdgr75dex4lwSNyASE8VDeIS0zhQzEi/exvgB7keBH1bA6lhjY7t3K g1z6YfJZA==; Received: from localhost ([::1] helo=merlin.infradead.org) by merlin.infradead.org with esmtp (Exim 4.92.3 #3 (Red Hat Linux)) id 1k6CfW-0004XU-E1; Thu, 13 Aug 2020 12:49:18 +0000 Received: from ssl.serverraum.org ([2a01:4f8:151:8464::1:2]) by merlin.infradead.org with esmtps (Exim 4.92.3 #3 (Red Hat Linux)) id 1k6Cf7-0004Oc-SJ for linux-arm-kernel@lists.infradead.org; Thu, 13 Aug 2020 12:49:00 +0000 Received: from mwalle01.sab.local. (unknown [213.135.10.150]) (using TLSv1.3 with cipher TLS_AES_256_GCM_SHA384 (256/256 bits) key-exchange ECDHE (P-384) server-signature RSA-PSS (2048 bits) server-digest SHA256) (No client certificate requested) by ssl.serverraum.org (Postfix) with ESMTPSA id 7B08523076; Thu, 13 Aug 2020 14:48:47 +0200 (CEST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=walle.cc; s=mail2016061301; t=1597322927; h=from:from:reply-to:subject:subject:date:date:message-id:message-id: to:to:cc:cc:mime-version:mime-version: content-transfer-encoding:content-transfer-encoding: in-reply-to:in-reply-to:references:references; bh=s57IfPlBMyINQlbwHMgny+vsDjYIv28EbdU1BRx0tM4=; b=Gxjxl4KpuLKVYGwaodCWI+oNCg1+PJK9iPUlIw8JLQrrKzsUZQ+W5IPK/o8EeeC/cnH2Py TQwuYxm3vaRLQWTGSyOZpUWqTZdSZUAs6uahFfNZoM/Q3Jd1u4JGff7GujvWbei+BFHyVp GskiZ7UP+TYrJ6Eor/3p5JRHC4fHSlw= From: Michael Walle To: linux-gpio@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-hwmon@vger.kernel.org, linux-pwm@vger.kernel.org, linux-watchdog@vger.kernel.org, linux-arm-kernel@lists.infradead.org Subject: [PATCH v8 02/13] dt-bindings: mfd: Add bindings for sl28cpld Date: Thu, 13 Aug 2020 14:48:21 +0200 Message-Id: <20200813124832.17349-3-michael@walle.cc> X-Mailer: git-send-email 2.20.1 In-Reply-To: <20200813124832.17349-1-michael@walle.cc> References: <20200813124832.17349-1-michael@walle.cc> MIME-Version: 1.0 X-Spam: Yes X-CRM114-Version: 20100106-BlameMichelson ( TRE 0.8.0 (BSD) ) MR-646709E3 X-CRM114-CacheID: sfid-20200813_084854_348130_6011E3A7 X-CRM114-Status: GOOD ( 20.94 ) X-Spam-Score: -2.5 (--) X-Spam-Report: SpamAssassin version 3.4.4 on merlin.infradead.org summary: Content analysis details: (-2.5 points) pts rule name description ---- ---------------------- -------------------------------------------------- -2.3 RCVD_IN_DNSWL_MED RBL: Sender listed at https://www.dnswl.org/, medium trust [2a01:4f8:151:8464:0:0:1:2 listed in] [list.dnswl.org] 0.0 SPF_HELO_NONE SPF: HELO does not publish an SPF Record -0.0 SPF_PASS SPF: sender matches SPF record -0.1 DKIM_VALID_AU Message has a valid DKIM or DK signature from author's domain 0.1 DKIM_SIGNED Message has a DKIM or DK signature, not necessarily valid -0.1 DKIM_VALID Message has at least one valid DKIM or DK signature -0.1 DKIM_VALID_EF Message has a valid DKIM or DK signature from envelope-from domain X-BeenThere: linux-arm-kernel@lists.infradead.org X-Mailman-Version: 2.1.29 Precedence: list List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Cc: Catalin Marinas , Linus Walleij , Thierry Reding , Pavel Machek , Will Deacon , Rob Herring , Wim Van Sebroeck , Marc Zyngier , Bartosz Golaszewski , =?utf-8?q?Uwe_Kleine-K?= =?utf-8?q?=C3=B6nig?= , Guenter Roeck , Jean Delvare , Jason Cooper , Rob Herring , Thomas Gleixner , Andy Shevchenko , Lee Jones , Greg Kroah-Hartman , Li Yang , Michael Walle , Mark Brown , Shawn Guo Sender: "linux-arm-kernel" Errors-To: linux-arm-kernel-bounces+patchwork-linux-arm=patchwork.kernel.org@lists.infradead.org Add a device tree bindings for the board management controller found on the Kontron SMARC-sAL28 board. Signed-off-by: Michael Walle Reviewed-by: Rob Herring --- Changes since v7: - none Changes since v6: - renamed "sl28cpld-r1" to "sl28cpld" - made paths relative - moved "reg" and "compatible" to the top of a node Changes since v5: - none Changes since v4: - fix the regex of the unit-address Changes since v3: - see cover letter .../bindings/gpio/kontron,sl28cpld-gpio.yaml | 54 +++++++ .../hwmon/kontron,sl28cpld-hwmon.yaml | 27 ++++ .../kontron,sl28cpld-intc.yaml | 54 +++++++ .../bindings/mfd/kontron,sl28cpld.yaml | 153 ++++++++++++++++++ .../bindings/pwm/kontron,sl28cpld-pwm.yaml | 35 ++++ .../watchdog/kontron,sl28cpld-wdt.yaml | 35 ++++ 6 files changed, 358 insertions(+) create mode 100644 Documentation/devicetree/bindings/gpio/kontron,sl28cpld-gpio.yaml create mode 100644 Documentation/devicetree/bindings/hwmon/kontron,sl28cpld-hwmon.yaml create mode 100644 Documentation/devicetree/bindings/interrupt-controller/kontron,sl28cpld-intc.yaml create mode 100644 Documentation/devicetree/bindings/mfd/kontron,sl28cpld.yaml create mode 100644 Documentation/devicetree/bindings/pwm/kontron,sl28cpld-pwm.yaml create mode 100644 Documentation/devicetree/bindings/watchdog/kontron,sl28cpld-wdt.yaml diff --git a/Documentation/devicetree/bindings/gpio/kontron,sl28cpld-gpio.yaml b/Documentation/devicetree/bindings/gpio/kontron,sl28cpld-gpio.yaml new file mode 100644 index 000000000000..e2d2c10e536a --- /dev/null +++ b/Documentation/devicetree/bindings/gpio/kontron,sl28cpld-gpio.yaml @@ -0,0 +1,54 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/gpio/kontron,sl28cpld-gpio.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: GPIO driver for the sl28cpld board management controller + +maintainers: + - Michael Walle + +description: | + This module is part of the sl28cpld multi-function device. For more + details see ../mfd/kontron,sl28cpld.yaml. + + There are three flavors of the GPIO controller, one full featured + input/output with interrupt support (kontron,sl28cpld-gpio), one + output-only (kontron,sl28-gpo) and one input-only (kontron,sl28-gpi). + + Each controller supports 8 GPIO lines. + +properties: + compatible: + enum: + - kontron,sl28cpld-gpio + - kontron,sl28cpld-gpi + - kontron,sl28cpld-gpo + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + "#interrupt-cells": + const: 2 + + interrupt-controller: true + + "#gpio-cells": + const: 2 + + gpio-controller: true + + gpio-line-names: + minItems: 1 + maxItems: 8 + +required: + - compatible + - "#gpio-cells" + - gpio-controller + +additionalProperties: false diff --git a/Documentation/devicetree/bindings/hwmon/kontron,sl28cpld-hwmon.yaml b/Documentation/devicetree/bindings/hwmon/kontron,sl28cpld-hwmon.yaml new file mode 100644 index 000000000000..010333cb25c0 --- /dev/null +++ b/Documentation/devicetree/bindings/hwmon/kontron,sl28cpld-hwmon.yaml @@ -0,0 +1,27 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/hwmon/kontron,sl28cpld-hwmon.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Hardware monitoring driver for the sl28cpld board management controller + +maintainers: + - Michael Walle + +description: | + This module is part of the sl28cpld multi-function device. For more + details see ../mfd/kontron,sl28cpld.yaml. + +properties: + compatible: + enum: + - kontron,sl28cpld-fan + + reg: + maxItems: 1 + +required: + - compatible + +additionalProperties: false diff --git a/Documentation/devicetree/bindings/interrupt-controller/kontron,sl28cpld-intc.yaml b/Documentation/devicetree/bindings/interrupt-controller/kontron,sl28cpld-intc.yaml new file mode 100644 index 000000000000..e8dfa6507f64 --- /dev/null +++ b/Documentation/devicetree/bindings/interrupt-controller/kontron,sl28cpld-intc.yaml @@ -0,0 +1,54 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/interrupt-controller/kontron,sl28cpld-intc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Interrupt controller driver for the sl28cpld board management controller + +maintainers: + - Michael Walle + +description: | + This module is part of the sl28cpld multi-function device. For more + details see ../mfd/kontron,sl28cpld.yaml. + + The following interrupts are available. All types and levels are fixed + and handled by the board management controller. + + ==== ============= ================================== + IRQ line/device description + ==== ============= ================================== + 0 RTC_INT# Interrupt line from on-board RTC + 1 SMB_ALERT# Event on SMB_ALERT# line (P1) + 2 ESPI_ALERT0# Event on ESPI_ALERT0# line (S43) + 3 ESPI_ALERT1# Event on ESPI_ALERT1# line (S44) + 4 PWR_BTN# Event on PWR_BTN# line (P128) + 5 SLEEP# Event on SLEEP# line (S149) + 6 watchdog Interrupt of the internal watchdog + 7 n/a not used + ==== ============= ================================== + +properties: + compatible: + enum: + - kontron,sl28cpld-intc + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + "#interrupt-cells": + const: 2 + + interrupt-controller: true + +required: + - compatible + - interrupts + - "#interrupt-cells" + - interrupt-controller + +additionalProperties: false diff --git a/Documentation/devicetree/bindings/mfd/kontron,sl28cpld.yaml b/Documentation/devicetree/bindings/mfd/kontron,sl28cpld.yaml new file mode 100644 index 000000000000..eb3b43547cb6 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/kontron,sl28cpld.yaml @@ -0,0 +1,153 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/kontron,sl28cpld.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Kontron's sl28cpld board management controller + +maintainers: + - Michael Walle + +description: | + The board management controller may contain different IP blocks like + watchdog, fan monitoring, PWM controller, interrupt controller and a + GPIO controller. + +properties: + compatible: + const: kontron,sl28cpld + + reg: + description: + I2C device address. + maxItems: 1 + + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + + "#interrupt-cells": + const: 2 + + interrupts: + maxItems: 1 + + interrupt-controller: true + +patternProperties: + "^gpio(@[0-9a-f]+)?$": + $ref: ../gpio/kontron,sl28cpld-gpio.yaml + + "^hwmon(@[0-9a-f]+)?$": + $ref: ../hwmon/kontron,sl28cpld-hwmon.yaml + + "^interrupt-controller(@[0-9a-f]+)?$": + $ref: ../interrupt-controller/kontron,sl28cpld-intc.yaml + + "^pwm(@[0-9a-f]+)?$": + $ref: ../pwm/kontron,sl28cpld-pwm.yaml + + "^watchdog(@[0-9a-f]+)?$": + $ref: ../watchdog/kontron,sl28cpld-wdt.yaml + +required: + - "#address-cells" + - "#size-cells" + - compatible + - reg + +additionalProperties: false + +examples: + - | + #include + i2c { + #address-cells = <1>; + #size-cells = <0>; + + sl28cpld@4a { + compatible = "kontron,sl28cpld"; + reg = <0x4a>; + #address-cells = <1>; + #size-cells = <0>; + + watchdog@4 { + compatible = "kontron,sl28cpld-wdt"; + reg = <0x4>; + kontron,assert-wdt-timeout-pin; + }; + + hwmon@b { + compatible = "kontron,sl28cpld-fan"; + reg = <0xb>; + }; + + pwm@c { + compatible = "kontron,sl28cpld-pwm"; + reg = <0xc>; + #pwm-cells = <2>; + }; + + pwm@e { + compatible = "kontron,sl28cpld-pwm"; + reg = <0xe>; + #pwm-cells = <2>; + }; + + gpio@10 { + compatible = "kontron,sl28cpld-gpio"; + reg = <0x10>; + interrupts-extended = <&gpio2 6 + IRQ_TYPE_EDGE_FALLING>; + + gpio-controller; + #gpio-cells = <2>; + gpio-line-names = "a", "b", "c"; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio@15 { + compatible = "kontron,sl28cpld-gpio"; + reg = <0x15>; + interrupts-extended = <&gpio2 6 + IRQ_TYPE_EDGE_FALLING>; + + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio@1a { + compatible = "kontron,sl28cpld-gpo"; + reg = <0x1a>; + + gpio-controller; + #gpio-cells = <2>; + }; + + gpio@1b { + compatible = "kontron,sl28cpld-gpi"; + reg = <0x1b>; + + gpio-controller; + #gpio-cells = <2>; + }; + + interrupt-controller@1c { + compatible = "kontron,sl28cpld-intc"; + reg = <0x1c>; + interrupts-extended = <&gpio2 6 + IRQ_TYPE_EDGE_FALLING>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/pwm/kontron,sl28cpld-pwm.yaml b/Documentation/devicetree/bindings/pwm/kontron,sl28cpld-pwm.yaml new file mode 100644 index 000000000000..981cfec53f37 --- /dev/null +++ b/Documentation/devicetree/bindings/pwm/kontron,sl28cpld-pwm.yaml @@ -0,0 +1,35 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pwm/kontron,sl28cpld-pwm.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: PWM driver for the sl28cpld board management controller + +maintainers: + - Michael Walle + +description: | + This module is part of the sl28cpld multi-function device. For more + details see ../mfd/kontron,sl28cpld.yaml. + + The controller supports one PWM channel and supports only four distinct + frequencies (250Hz, 500Hz, 1kHz, 2kHz). + +allOf: + - $ref: pwm.yaml# + +properties: + compatible: + const: kontron,sl28cpld-pwm + + reg: + maxItems: 1 + + "#pwm-cells": + const: 2 + +required: + - compatible + +additionalProperties: false diff --git a/Documentation/devicetree/bindings/watchdog/kontron,sl28cpld-wdt.yaml b/Documentation/devicetree/bindings/watchdog/kontron,sl28cpld-wdt.yaml new file mode 100644 index 000000000000..179272f74de5 --- /dev/null +++ b/Documentation/devicetree/bindings/watchdog/kontron,sl28cpld-wdt.yaml @@ -0,0 +1,35 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/watchdog/kontron,sl28cpld-wdt.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Watchdog driver for the sl28cpld board management controller + +maintainers: + - Michael Walle + +description: | + This module is part of the sl28cpld multi-function device. For more + details see ../mfd/kontron,sl28cpld.yaml. + +allOf: + - $ref: watchdog.yaml# + +properties: + compatible: + const: kontron,sl28cpld-wdt + + reg: + maxItems: 1 + + kontron,assert-wdt-timeout-pin: + description: The SMARC standard defines a WDT_TIME_OUT# pin. If this + property is set, this output will be pulsed when the watchdog bites + and the system resets. + type: boolean + +required: + - compatible + +additionalProperties: false From patchwork Thu Aug 13 12:48:22 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Michael Walle X-Patchwork-Id: 11712437 Return-Path: Received: from mail.kernel.org (pdx-korg-mail-1.web.codeaurora.org [172.30.200.123]) by pdx-korg-patchwork-2.web.codeaurora.org (Postfix) with ESMTP id B4CB2138C for ; Thu, 13 Aug 2020 12:49:13 +0000 (UTC) Received: from merlin.infradead.org (merlin.infradead.org [205.233.59.134]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by mail.kernel.org (Postfix) with ESMTPS id 8CBC520791 for ; Thu, 13 Aug 2020 12:49:13 +0000 (UTC) Authentication-Results: mail.kernel.org; dkim=pass (2048-bit key) header.d=lists.infradead.org header.i=@lists.infradead.org header.b="bRNjWJgT"; dkim=fail reason="signature verification failed" (1024-bit key) header.d=walle.cc header.i=@walle.cc header.b="RGXuL2Ck" DMARC-Filter: OpenDMARC Filter v1.3.2 mail.kernel.org 8CBC520791 Authentication-Results: mail.kernel.org; dmarc=none (p=none dis=none) header.from=walle.cc Authentication-Results: mail.kernel.org; spf=none smtp.mailfrom=linux-arm-kernel-bounces+patchwork-linux-arm=patchwork.kernel.org@lists.infradead.org DKIM-Signature: v=1; a=rsa-sha256; q=dns/txt; c=relaxed/relaxed; d=lists.infradead.org; s=merlin.20170209; h=Sender:Content-Transfer-Encoding: Content-Type:Cc:List-Subscribe:List-Help:List-Post:List-Archive: List-Unsubscribe:List-Id:MIME-Version:References:In-Reply-To:Message-Id:Date: Subject:To:From:Reply-To:Content-ID:Content-Description:Resent-Date: Resent-From:Resent-Sender:Resent-To:Resent-Cc:Resent-Message-ID:List-Owner; bh=deuUsI3N9SOQkSDkqQDWRE2z7vsU2TtUQMXYX3SFZZ0=; b=bRNjWJgTeHfKxL/LHGW6fWr5E 2f0kldBSWeJauj8lEcaxhx2mM4wJGtED2ELGrCX+IOlzd++jhlCN5pjJmGuT8o78Lbkygpv502tSu rE/fX6J4XLAyc4rdJTfraexj2p2yvQ8ktFs5+TmJ24atse33qfNpc7RhXomeCWpmYYd9D0SopGczr okBBN3TQbbTC35dd5IcSNEKnfgxm3Jb0YTlEZrg1X6RADAG75+IgV85NEQaE27HP6xyFUkSp13gcn Bus8YbBFSsHpeylPWds0t8G5OUaLXUtfgYLvvaOcHi3FRQKhH+dF9YyceBCTh5s3Qqqw9sluYjed2 4WbJkDCaA==; Received: from localhost ([::1] helo=merlin.infradead.org) by merlin.infradead.org with esmtp (Exim 4.92.3 #3 (Red Hat Linux)) id 1k6CfB-0004QE-MZ; Thu, 13 Aug 2020 12:48:57 +0000 Received: from ssl.serverraum.org ([2a01:4f8:151:8464::1:2]) by merlin.infradead.org with esmtps (Exim 4.92.3 #3 (Red Hat Linux)) id 1k6Cf7-0004Od-SL for linux-arm-kernel@lists.infradead.org; Thu, 13 Aug 2020 12:48:55 +0000 Received: from mwalle01.sab.local. (unknown [213.135.10.150]) (using TLSv1.3 with cipher TLS_AES_256_GCM_SHA384 (256/256 bits) key-exchange ECDHE (P-384) server-signature RSA-PSS (2048 bits) server-digest SHA256) (No client certificate requested) by ssl.serverraum.org (Postfix) with ESMTPSA id E82D723E40; Thu, 13 Aug 2020 14:48:49 +0200 (CEST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=walle.cc; s=mail2016061301; t=1597322930; h=from:from:reply-to:subject:subject:date:date:message-id:message-id: to:to:cc:cc:mime-version:mime-version: content-transfer-encoding:content-transfer-encoding: in-reply-to:in-reply-to:references:references; bh=tHkNBbBYgPYNx6iMyzSpDdM+iHiVEF3MAUN4UPSYR8o=; b=RGXuL2Cka/hQmlMiLL0IGb+YWF0FE/QjiiJ20CAO6hkdrxD+pIrJxaf4rzLRisHhF/Pta8 gAmuA0oO1tIwGB/KNv/zzd40farWGNy398jvLoyiaHNUsCwDtTyKJ/oXUa4R5UmGAgElQr oNSbbiSxuynajkIsPEWl6ORCNAqLG0M= From: Michael Walle To: linux-gpio@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-hwmon@vger.kernel.org, linux-pwm@vger.kernel.org, linux-watchdog@vger.kernel.org, linux-arm-kernel@lists.infradead.org Subject: [PATCH v8 03/13] mfd: simple-mfd-i2c: add sl28cpld support Date: Thu, 13 Aug 2020 14:48:22 +0200 Message-Id: <20200813124832.17349-4-michael@walle.cc> X-Mailer: git-send-email 2.20.1 In-Reply-To: <20200813124832.17349-1-michael@walle.cc> References: <20200813124832.17349-1-michael@walle.cc> MIME-Version: 1.0 X-Spam: Yes X-CRM114-Version: 20100106-BlameMichelson ( TRE 0.8.0 (BSD) ) MR-646709E3 X-CRM114-CacheID: sfid-20200813_084854_071086_A44502BA X-CRM114-Status: GOOD ( 18.30 ) X-Spam-Score: -2.5 (--) X-Spam-Report: SpamAssassin version 3.4.4 on merlin.infradead.org summary: Content analysis details: (-2.5 points) pts rule name description ---- ---------------------- -------------------------------------------------- -2.3 RCVD_IN_DNSWL_MED RBL: Sender listed at https://www.dnswl.org/, medium trust [2a01:4f8:151:8464:0:0:1:2 listed in] [list.dnswl.org] 0.0 SPF_HELO_NONE SPF: HELO does not publish an SPF Record -0.0 SPF_PASS SPF: sender matches SPF record -0.1 DKIM_VALID_AU Message has a valid DKIM or DK signature from author's domain 0.1 DKIM_SIGNED Message has a DKIM or DK signature, not necessarily valid -0.1 DKIM_VALID Message has at least one valid DKIM or DK signature -0.1 DKIM_VALID_EF Message has a valid DKIM or DK signature from envelope-from domain X-BeenThere: linux-arm-kernel@lists.infradead.org X-Mailman-Version: 2.1.29 Precedence: list List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Cc: Marc Zyngier , Jean Delvare , Catalin Marinas , Jason Cooper , Will Deacon , Greg Kroah-Hartman , Shawn Guo , Linus Walleij , Andy Shevchenko , Li Yang , Bartosz Golaszewski , Michael Walle , Rob Herring , Thierry Reding , Mark Brown , Pavel Machek , =?utf-8?q?Uwe_Kleine-K=C3=B6nig?= , Thomas Gleixner , Wim Van Sebroeck , Lee Jones , Guenter Roeck Sender: "linux-arm-kernel" Errors-To: linux-arm-kernel-bounces+patchwork-linux-arm=patchwork.kernel.org@lists.infradead.org Add the core support for the board management controller found on the SMARC-sAL28 board. Also add a virtual symbol which pulls in the simple-mfd-i2c driver and provide a common symbol on which the subdevice drivers can depend on. At the moment, this controller is used on the Kontron SMARC-sAL28 board. Signed-off-by: Michael Walle --- Changes since v7: - added MFD_SL28CPLD virtual Kconfig symbol - Please note, that I intentionally removed the Acked-for-MFD-by because of this change. Changes since v6: - renamed "sl28cpld-r1" to "sl28cpld" Changes since v5: - none Changes since v4: - new patch drivers/mfd/Kconfig | 10 ++++++++++ drivers/mfd/simple-mfd-i2c.c | 1 + 2 files changed, 11 insertions(+) diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig index 6e1a38944d28..ed90eb5bdc83 100644 --- a/drivers/mfd/Kconfig +++ b/drivers/mfd/Kconfig @@ -1174,6 +1174,16 @@ config MFD_SIMPLE_MFD_I2C sub-devices represented by child nodes in Device Tree will be subsequently registered. +config MFD_SL28CPLD + tristate "Kontron sl28cpld Board Management Controller" + select MFD_SIMPLE_MFD_I2C + help + Say yes here to enable support for the Kontron sl28cpld board + management controller. + + It can be found on the following boards: + * SMARC-sAL28 + config MFD_SM501 tristate "Silicon Motion SM501" depends on HAS_DMA diff --git a/drivers/mfd/simple-mfd-i2c.c b/drivers/mfd/simple-mfd-i2c.c index 09b40ebfdf07..99b99d81f281 100644 --- a/drivers/mfd/simple-mfd-i2c.c +++ b/drivers/mfd/simple-mfd-i2c.c @@ -38,6 +38,7 @@ static int simple_mfd_i2c_probe(struct i2c_client *i2c) } static const struct of_device_id simple_mfd_i2c_of_match[] = { + { .compatible = "kontron,sl28cpld" }, {} }; MODULE_DEVICE_TABLE(of, simple_mfd_i2c_of_match); From patchwork Thu Aug 13 12:48:23 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Michael Walle X-Patchwork-Id: 11712445 Return-Path: Received: from mail.kernel.org (pdx-korg-mail-1.web.codeaurora.org [172.30.200.123]) by pdx-korg-patchwork-2.web.codeaurora.org (Postfix) with ESMTP id 703C7722 for ; Thu, 13 Aug 2020 12:49:23 +0000 (UTC) Received: from merlin.infradead.org (merlin.infradead.org [205.233.59.134]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by mail.kernel.org (Postfix) with ESMTPS id 4486020791 for ; Thu, 13 Aug 2020 12:49:23 +0000 (UTC) Authentication-Results: mail.kernel.org; dkim=pass (2048-bit key) header.d=lists.infradead.org header.i=@lists.infradead.org header.b="XxQmIELP"; dkim=fail reason="signature verification failed" (1024-bit key) header.d=walle.cc header.i=@walle.cc header.b="vmpDWDA8" DMARC-Filter: OpenDMARC Filter v1.3.2 mail.kernel.org 4486020791 Authentication-Results: mail.kernel.org; dmarc=none (p=none dis=none) header.from=walle.cc Authentication-Results: mail.kernel.org; spf=none smtp.mailfrom=linux-arm-kernel-bounces+patchwork-linux-arm=patchwork.kernel.org@lists.infradead.org DKIM-Signature: v=1; a=rsa-sha256; q=dns/txt; c=relaxed/relaxed; d=lists.infradead.org; s=merlin.20170209; h=Sender:Content-Transfer-Encoding: Content-Type:Cc:List-Subscribe:List-Help:List-Post:List-Archive: List-Unsubscribe:List-Id:MIME-Version:References:In-Reply-To:Message-Id:Date: Subject:To:From:Reply-To:Content-ID:Content-Description:Resent-Date: Resent-From:Resent-Sender:Resent-To:Resent-Cc:Resent-Message-ID:List-Owner; bh=vSUQuf1ntQkmDiWa10njNVzz8HIg7tfgFjB2fsMERPQ=; b=XxQmIELPrbk8ZN+D2DgHTrhws VZL6JjjM27hasnq9di1Yc6VbDl/jj9uucOAJHT90RHBBSBSv6XrfRGTD7ZzT4FTua+A79DtKJWr48 4L7fU+5Ap8Jul3WEjSUio+qhCcuvmBSzkcPjnJ6UngZnOLwWJ+u+UslU2DbA2K6pw+8FsI/HEVt2n V9JMwlA7aY262J/44QIsho7cn8toxkgIfewKYBlZKYzwexY3wNo/JtfwClG7u5kZ2TZyQADHquzNe 9aWL3S609zLh8riS9zNYL1pL410/RnnqQlvk7hrSCGgmSufQ/IuDYtIeo7bWX1oPNlbf1fX7ksPjf vR43inpjg==; Received: from localhost ([::1] helo=merlin.infradead.org) by merlin.infradead.org with esmtp (Exim 4.92.3 #3 (Red Hat Linux)) id 1k6CfQ-0004Vk-Hw; Thu, 13 Aug 2020 12:49:12 +0000 Received: from ssl.serverraum.org ([2a01:4f8:151:8464::1:2]) by merlin.infradead.org with esmtps (Exim 4.92.3 #3 (Red Hat Linux)) id 1k6Cf7-0004Of-SL for linux-arm-kernel@lists.infradead.org; Thu, 13 Aug 2020 12:48:59 +0000 Received: from mwalle01.sab.local. (unknown [213.135.10.150]) (using TLSv1.3 with cipher TLS_AES_256_GCM_SHA384 (256/256 bits) key-exchange ECDHE (P-384) server-signature RSA-PSS (2048 bits) server-digest SHA256) (No client certificate requested) by ssl.serverraum.org (Postfix) with ESMTPSA id 6D18423E42; Thu, 13 Aug 2020 14:48:50 +0200 (CEST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=walle.cc; s=mail2016061301; t=1597322930; h=from:from:reply-to:subject:subject:date:date:message-id:message-id: to:to:cc:cc:mime-version:mime-version: content-transfer-encoding:content-transfer-encoding: in-reply-to:in-reply-to:references:references; bh=2u/cot6CU6/Y5I/4X9Pr9Fa4kSp/X/8BHzwbd62iWRw=; b=vmpDWDA8UybN0DxXCSsQtUYV6eDymo9nJyXlSaBsgq9J8naBE3ygb4VVlQ2oRWs06zoEzq svqJ7mXDoVSz/g6ZEJsXmDtcEljXu1OsYf6jB9aFESn21e3i5zFPTG49i1/97RfDkamE3z VXBRgfxIn2rkuNy5A/pWagWelsZQKfE= From: Michael Walle To: linux-gpio@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-hwmon@vger.kernel.org, linux-pwm@vger.kernel.org, linux-watchdog@vger.kernel.org, linux-arm-kernel@lists.infradead.org Subject: [PATCH v8 04/13] irqchip: add sl28cpld interrupt controller support Date: Thu, 13 Aug 2020 14:48:23 +0200 Message-Id: <20200813124832.17349-5-michael@walle.cc> X-Mailer: git-send-email 2.20.1 In-Reply-To: <20200813124832.17349-1-michael@walle.cc> References: <20200813124832.17349-1-michael@walle.cc> MIME-Version: 1.0 X-Spam: Yes X-CRM114-Version: 20100106-BlameMichelson ( TRE 0.8.0 (BSD) ) MR-646709E3 X-CRM114-CacheID: sfid-20200813_084854_245135_980B48F5 X-CRM114-Status: GOOD ( 25.24 ) X-Spam-Score: -2.5 (--) X-Spam-Report: SpamAssassin version 3.4.4 on merlin.infradead.org summary: Content analysis details: (-2.5 points) pts rule name description ---- ---------------------- -------------------------------------------------- -2.3 RCVD_IN_DNSWL_MED RBL: Sender listed at https://www.dnswl.org/, medium trust [2a01:4f8:151:8464:0:0:1:2 listed in] [list.dnswl.org] 0.0 SPF_HELO_NONE SPF: HELO does not publish an SPF Record -0.0 SPF_PASS SPF: sender matches SPF record -0.1 DKIM_VALID_AU Message has a valid DKIM or DK signature from author's domain 0.1 DKIM_SIGNED Message has a DKIM or DK signature, not necessarily valid -0.1 DKIM_VALID Message has at least one valid DKIM or DK signature -0.1 DKIM_VALID_EF Message has a valid DKIM or DK signature from envelope-from domain X-BeenThere: linux-arm-kernel@lists.infradead.org X-Mailman-Version: 2.1.29 Precedence: list List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Cc: Marc Zyngier , Jean Delvare , Catalin Marinas , Jason Cooper , Will Deacon , Greg Kroah-Hartman , Shawn Guo , Linus Walleij , Andy Shevchenko , Li Yang , Bartosz Golaszewski , Michael Walle , Rob Herring , Thierry Reding , Mark Brown , Pavel Machek , =?utf-8?q?Uwe_Kleine-K=C3=B6nig?= , Thomas Gleixner , Wim Van Sebroeck , Lee Jones , Guenter Roeck Sender: "linux-arm-kernel" Errors-To: linux-arm-kernel-bounces+patchwork-linux-arm=patchwork.kernel.org@lists.infradead.org Add support for the interrupt controller inside the sl28 CPLD management controller. The interrupt controller can handle at most 8 interrupts and is really simplistic and consists only of an interrupt mask and an interrupt pending register. Signed-off-by: Michael Walle Acked-by: Marc Zyngier --- Changes since v7: - added "depends on MFD_SL28CPLD=y || COMPILE_TEST" Changes since v6: - none Changes since v5: - none Changes since v4: - update copyright year - don't use "int irq" instead of "unsigne int irq", because platform_get_irq() might return a negative error code. Found by "kernel test robot - remove comma in terminator line of the compatible strings list, suggested by Andy - use newer devm_regmap_add_irq_chip_fwnode() - don't use KBUID_MODNAME, suggested by Andy - remove the platform device table Changes since v3: - see cover letter drivers/irqchip/Kconfig | 8 +++ drivers/irqchip/Makefile | 1 + drivers/irqchip/irq-sl28cpld.c | 96 ++++++++++++++++++++++++++++++++++ 3 files changed, 105 insertions(+) create mode 100644 drivers/irqchip/irq-sl28cpld.c diff --git a/drivers/irqchip/Kconfig b/drivers/irqchip/Kconfig index bb70b7177f94..19cd32ba2155 100644 --- a/drivers/irqchip/Kconfig +++ b/drivers/irqchip/Kconfig @@ -246,6 +246,14 @@ config RENESAS_RZA1_IRQC Enable support for the Renesas RZ/A1 Interrupt Controller, to use up to 8 external interrupts with configurable sense select. +config SL28CPLD_INTC + bool "Kontron sl28cpld IRQ controller" + depends on MFD_SL28CPLD=y || COMPILE_TEST + select REGMAP_IRQ + help + Interrupt controller driver for the board management controller + found on the Kontron sl28 CPLD. + config ST_IRQCHIP bool select REGMAP diff --git a/drivers/irqchip/Makefile b/drivers/irqchip/Makefile index 133f9c45744a..39af7d89204d 100644 --- a/drivers/irqchip/Makefile +++ b/drivers/irqchip/Makefile @@ -111,3 +111,4 @@ obj-$(CONFIG_LOONGSON_HTPIC) += irq-loongson-htpic.o obj-$(CONFIG_LOONGSON_HTVEC) += irq-loongson-htvec.o obj-$(CONFIG_LOONGSON_PCH_PIC) += irq-loongson-pch-pic.o obj-$(CONFIG_LOONGSON_PCH_MSI) += irq-loongson-pch-msi.o +obj-$(CONFIG_SL28CPLD_INTC) += irq-sl28cpld.o diff --git a/drivers/irqchip/irq-sl28cpld.c b/drivers/irqchip/irq-sl28cpld.c new file mode 100644 index 000000000000..0aa50d025ef6 --- /dev/null +++ b/drivers/irqchip/irq-sl28cpld.c @@ -0,0 +1,96 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * sl28cpld interrupt controller driver + * + * Copyright 2020 Kontron Europe GmbH + */ + +#include +#include +#include +#include +#include +#include +#include + +#define INTC_IE 0x00 +#define INTC_IP 0x01 + +static const struct regmap_irq sl28cpld_irqs[] = { + REGMAP_IRQ_REG_LINE(0, 8), + REGMAP_IRQ_REG_LINE(1, 8), + REGMAP_IRQ_REG_LINE(2, 8), + REGMAP_IRQ_REG_LINE(3, 8), + REGMAP_IRQ_REG_LINE(4, 8), + REGMAP_IRQ_REG_LINE(5, 8), + REGMAP_IRQ_REG_LINE(6, 8), + REGMAP_IRQ_REG_LINE(7, 8), +}; + +struct sl28cpld_intc { + struct regmap *regmap; + struct regmap_irq_chip chip; + struct regmap_irq_chip_data *irq_data; +}; + +static int sl28cpld_intc_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct sl28cpld_intc *irqchip; + int irq; + u32 base; + int ret; + + if (!dev->parent) + return -ENODEV; + + irqchip = devm_kzalloc(dev, sizeof(*irqchip), GFP_KERNEL); + if (!irqchip) + return -ENOMEM; + + irqchip->regmap = dev_get_regmap(dev->parent, NULL); + if (!irqchip->regmap) + return -ENODEV; + + irq = platform_get_irq(pdev, 0); + if (irq < 0) + return irq; + + ret = device_property_read_u32(&pdev->dev, "reg", &base); + if (ret) + return -EINVAL; + + irqchip->chip.name = "sl28cpld-intc"; + irqchip->chip.irqs = sl28cpld_irqs; + irqchip->chip.num_irqs = ARRAY_SIZE(sl28cpld_irqs); + irqchip->chip.num_regs = 1; + irqchip->chip.status_base = base + INTC_IP; + irqchip->chip.mask_base = base + INTC_IE; + irqchip->chip.mask_invert = true, + irqchip->chip.ack_base = base + INTC_IP; + + return devm_regmap_add_irq_chip_fwnode(dev, dev_fwnode(dev), + irqchip->regmap, irq, + IRQF_SHARED | IRQF_ONESHOT, 0, + &irqchip->chip, + &irqchip->irq_data); +} + +static const struct of_device_id sl28cpld_intc_of_match[] = { + { .compatible = "kontron,sl28cpld-intc" }, + {} +}; +MODULE_DEVICE_TABLE(of, sl28cpld_intc_of_match); + +static struct platform_driver sl28cpld_intc_driver = { + .probe = sl28cpld_intc_probe, + .driver = { + .name = "sl28cpld-intc", + .of_match_table = sl28cpld_intc_of_match, + } +}; +module_platform_driver(sl28cpld_intc_driver); + +MODULE_DESCRIPTION("sl28cpld Interrupt Controller Driver"); +MODULE_AUTHOR("Michael Walle "); +MODULE_LICENSE("GPL"); From patchwork Thu Aug 13 12:48:24 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Michael Walle X-Patchwork-Id: 11712465 Return-Path: Received: from mail.kernel.org (pdx-korg-mail-1.web.codeaurora.org [172.30.200.123]) by pdx-korg-patchwork-2.web.codeaurora.org (Postfix) with ESMTP id 88BDC722 for ; Thu, 13 Aug 2020 12:49:53 +0000 (UTC) Received: from merlin.infradead.org (merlin.infradead.org [205.233.59.134]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by mail.kernel.org (Postfix) with ESMTPS id 53A0420791 for ; Thu, 13 Aug 2020 12:49:53 +0000 (UTC) Authentication-Results: mail.kernel.org; dkim=pass (2048-bit key) header.d=lists.infradead.org header.i=@lists.infradead.org header.b="BTAq5PFk"; dkim=fail reason="signature verification failed" (1024-bit key) header.d=walle.cc header.i=@walle.cc header.b="Z6fKIi+7" DMARC-Filter: OpenDMARC Filter v1.3.2 mail.kernel.org 53A0420791 Authentication-Results: mail.kernel.org; dmarc=none (p=none dis=none) header.from=walle.cc Authentication-Results: mail.kernel.org; spf=none smtp.mailfrom=linux-arm-kernel-bounces+patchwork-linux-arm=patchwork.kernel.org@lists.infradead.org DKIM-Signature: v=1; a=rsa-sha256; q=dns/txt; c=relaxed/relaxed; d=lists.infradead.org; s=merlin.20170209; h=Sender:Content-Transfer-Encoding: Content-Type:Cc:List-Subscribe:List-Help:List-Post:List-Archive: List-Unsubscribe:List-Id:MIME-Version:References:In-Reply-To:Message-Id:Date: Subject:To:From:Reply-To:Content-ID:Content-Description:Resent-Date: Resent-From:Resent-Sender:Resent-To:Resent-Cc:Resent-Message-ID:List-Owner; bh=kJs4dCyFYWZGPzWJdzdlkE/uNizRFIUFxm8rEdttVHs=; b=BTAq5PFke0cBBSRyw2OR4f/8W KKFPRPF/bpyeKmOiCrdqIfhOc5tEwdhiiL+O+iPxlDdVI3RpJI8SIdq11VFFngcPXPUh6HiKThZEM APyuYuCBJLMCc1+GzvKxflco8jSZLAZH3B1o0C8s22Jd8uxaQeOA61qaNnxnAz1aoCldF0aQsf1GQ aJl8+5w1BPARNZA/QEoOnBvtflFBf1C2aJni/Cx02FyAagbmH4g2luyYgCuDY4p/AMQSptwAY28M8 sQhGsiSiLh4UXuLJOtOC2wmNoza0gNyTcO8tPTT7ySwt6vqqBLsOYeuPv3dDg72fSojoWqbdTpXcZ dZ+WgSSBg==; Received: from localhost ([::1] helo=merlin.infradead.org) by merlin.infradead.org with esmtp (Exim 4.92.3 #3 (Red Hat Linux)) id 1k6Cft-0004fk-9U; Thu, 13 Aug 2020 12:49:41 +0000 Received: from ssl.serverraum.org ([176.9.125.105]) by merlin.infradead.org with esmtps (Exim 4.92.3 #3 (Red Hat Linux)) id 1k6CfA-0004QC-HR for linux-arm-kernel@lists.infradead.org; Thu, 13 Aug 2020 12:49:04 +0000 Received: from mwalle01.sab.local. (unknown [213.135.10.150]) (using TLSv1.3 with cipher TLS_AES_256_GCM_SHA384 (256/256 bits) key-exchange ECDHE (P-384) server-signature RSA-PSS (2048 bits) server-digest SHA256) (No client certificate requested) by ssl.serverraum.org (Postfix) with ESMTPSA id 208E923E44; Thu, 13 Aug 2020 14:48:51 +0200 (CEST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=walle.cc; s=mail2016061301; t=1597322931; h=from:from:reply-to:subject:subject:date:date:message-id:message-id: to:to:cc:cc:mime-version:mime-version: content-transfer-encoding:content-transfer-encoding: in-reply-to:in-reply-to:references:references; bh=uCVdYm8TKc6zhR07RFPNiC/0PSVOyHldVAui8d25PnU=; b=Z6fKIi+7xN7rvqH1Qh0dlaJCSaQR9quw+xG3t7w6HtUCJiqObNeCcPn++3Y4YCplIYbuF2 19EAMYUO2ioYW2Yl5SPbRJKy03/P2nWxR8QVt5eBZj4RifRogIRpsn5NgsPc+TjyXcG+t4 EGprw/c/JYxEnJk/+mk7yTEitiitc5s= From: Michael Walle To: linux-gpio@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-hwmon@vger.kernel.org, linux-pwm@vger.kernel.org, linux-watchdog@vger.kernel.org, linux-arm-kernel@lists.infradead.org Subject: [PATCH v8 05/13] watchdog: add support for sl28cpld watchdog Date: Thu, 13 Aug 2020 14:48:24 +0200 Message-Id: <20200813124832.17349-6-michael@walle.cc> X-Mailer: git-send-email 2.20.1 In-Reply-To: <20200813124832.17349-1-michael@walle.cc> References: <20200813124832.17349-1-michael@walle.cc> MIME-Version: 1.0 X-Spam: Yes X-CRM114-Version: 20100106-BlameMichelson ( TRE 0.8.0 (BSD) ) MR-646709E3 X-CRM114-CacheID: sfid-20200813_084856_888506_DC11F00A X-CRM114-Status: GOOD ( 31.67 ) X-Spam-Score: -2.5 (--) X-Spam-Report: SpamAssassin version 3.4.4 on merlin.infradead.org summary: Content analysis details: (-2.5 points) pts rule name description ---- ---------------------- -------------------------------------------------- -2.3 RCVD_IN_DNSWL_MED RBL: Sender listed at https://www.dnswl.org/, medium trust [176.9.125.105 listed in list.dnswl.org] 0.0 SPF_HELO_NONE SPF: HELO does not publish an SPF Record -0.0 SPF_PASS SPF: sender matches SPF record -0.1 DKIM_VALID_AU Message has a valid DKIM or DK signature from author's domain 0.1 DKIM_SIGNED Message has a DKIM or DK signature, not necessarily valid -0.1 DKIM_VALID Message has at least one valid DKIM or DK signature -0.1 DKIM_VALID_EF Message has a valid DKIM or DK signature from envelope-from domain X-BeenThere: linux-arm-kernel@lists.infradead.org X-Mailman-Version: 2.1.29 Precedence: list List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Cc: Marc Zyngier , Jean Delvare , Catalin Marinas , Jason Cooper , Will Deacon , Greg Kroah-Hartman , Shawn Guo , Linus Walleij , Andy Shevchenko , Li Yang , Bartosz Golaszewski , Michael Walle , Rob Herring , Thierry Reding , Mark Brown , Pavel Machek , =?utf-8?q?Uwe_Kleine-K=C3=B6nig?= , Thomas Gleixner , Wim Van Sebroeck , Lee Jones , Guenter Roeck Sender: "linux-arm-kernel" Errors-To: linux-arm-kernel-bounces+patchwork-linux-arm=patchwork.kernel.org@lists.infradead.org Add support for the watchdog of the sl28cpld board management controller. This is part of a multi-function device driver. Signed-off-by: Michael Walle Acked-by: Guenter Roeck --- Changes since v7: - added "depends on MFD_SL28CPLD || COMPILE_TEST" Changes since v6: - none Changes since v5: - none Changes since v4: - update copyright year - remove #include , suggested by Andy. - slightly reworked the error code handling (only style), suggested by Andy. - Don't use "if (ret < 0)", but only "if (ret)", suggested by Andy. - remove comma in terminator line of the compatible strings list - don't use KBUID_MODNAME - remove the platform device table Changes since v3: - see cover letter drivers/watchdog/Kconfig | 11 ++ drivers/watchdog/Makefile | 1 + drivers/watchdog/sl28cpld_wdt.c | 229 ++++++++++++++++++++++++++++++++ 3 files changed, 241 insertions(+) create mode 100644 drivers/watchdog/sl28cpld_wdt.c diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig index ab7aad5a1e69..ba698340ed6f 100644 --- a/drivers/watchdog/Kconfig +++ b/drivers/watchdog/Kconfig @@ -340,6 +340,17 @@ config MLX_WDT To compile this driver as a module, choose M here: the module will be called mlx-wdt. +config SL28CPLD_WATCHDOG + tristate "Kontron sl28cpld Watchdog" + depends on MFD_SL28CPLD || COMPILE_TEST + select WATCHDOG_CORE + help + Say Y here to include support for the watchdog timer + on the Kontron sl28 CPLD. + + To compile this driver as a module, choose M here: the + module will be called sl28cpld_wdt. + # ALPHA Architecture # ARM Architecture diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile index 97bed1d3d97c..aa6e41126901 100644 --- a/drivers/watchdog/Makefile +++ b/drivers/watchdog/Makefile @@ -225,3 +225,4 @@ obj-$(CONFIG_MENF21BMC_WATCHDOG) += menf21bmc_wdt.o obj-$(CONFIG_MENZ069_WATCHDOG) += menz69_wdt.o obj-$(CONFIG_RAVE_SP_WATCHDOG) += rave-sp-wdt.o obj-$(CONFIG_STPMIC1_WATCHDOG) += stpmic1_wdt.o +obj-$(CONFIG_SL28CPLD_WATCHDOG) += sl28cpld_wdt.o diff --git a/drivers/watchdog/sl28cpld_wdt.c b/drivers/watchdog/sl28cpld_wdt.c new file mode 100644 index 000000000000..a45047d8d9ab --- /dev/null +++ b/drivers/watchdog/sl28cpld_wdt.c @@ -0,0 +1,229 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * sl28cpld watchdog driver + * + * Copyright 2020 Kontron Europe GmbH + */ + +#include +#include +#include +#include +#include +#include +#include + +/* + * Watchdog timer block registers. + */ +#define WDT_CTRL 0x00 +#define WDT_CTRL_EN BIT(0) +#define WDT_CTRL_LOCK BIT(2) +#define WDT_CTRL_ASSERT_SYS_RESET BIT(6) +#define WDT_CTRL_ASSERT_WDT_TIMEOUT BIT(7) +#define WDT_TIMEOUT 0x01 +#define WDT_KICK 0x02 +#define WDT_KICK_VALUE 0x6b +#define WDT_COUNT 0x03 + +#define WDT_DEFAULT_TIMEOUT 10 + +static bool nowayout = WATCHDOG_NOWAYOUT; +module_param(nowayout, bool, 0); +MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" + __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); + +static int timeout; +module_param(timeout, int, 0); +MODULE_PARM_DESC(timeout, "Initial watchdog timeout in seconds"); + +struct sl28cpld_wdt { + struct watchdog_device wdd; + struct regmap *regmap; + u32 offset; + bool assert_wdt_timeout; +}; + +static int sl28cpld_wdt_ping(struct watchdog_device *wdd) +{ + struct sl28cpld_wdt *wdt = watchdog_get_drvdata(wdd); + + return regmap_write(wdt->regmap, wdt->offset + WDT_KICK, + WDT_KICK_VALUE); +} + +static int sl28cpld_wdt_start(struct watchdog_device *wdd) +{ + struct sl28cpld_wdt *wdt = watchdog_get_drvdata(wdd); + unsigned int val; + + val = WDT_CTRL_EN | WDT_CTRL_ASSERT_SYS_RESET; + if (wdt->assert_wdt_timeout) + val |= WDT_CTRL_ASSERT_WDT_TIMEOUT; + if (nowayout) + val |= WDT_CTRL_LOCK; + + return regmap_update_bits(wdt->regmap, wdt->offset + WDT_CTRL, + val, val); +} + +static int sl28cpld_wdt_stop(struct watchdog_device *wdd) +{ + struct sl28cpld_wdt *wdt = watchdog_get_drvdata(wdd); + + return regmap_update_bits(wdt->regmap, wdt->offset + WDT_CTRL, + WDT_CTRL_EN, 0); +} + +static unsigned int sl28cpld_wdt_get_timeleft(struct watchdog_device *wdd) +{ + struct sl28cpld_wdt *wdt = watchdog_get_drvdata(wdd); + unsigned int val; + int ret; + + ret = regmap_read(wdt->regmap, wdt->offset + WDT_COUNT, &val); + if (ret) + return 0; + + return val; +} + +static int sl28cpld_wdt_set_timeout(struct watchdog_device *wdd, + unsigned int timeout) +{ + struct sl28cpld_wdt *wdt = watchdog_get_drvdata(wdd); + int ret; + + ret = regmap_write(wdt->regmap, wdt->offset + WDT_TIMEOUT, timeout); + if (ret) + return ret; + + wdd->timeout = timeout; + + return 0; +} + +static const struct watchdog_info sl28cpld_wdt_info = { + .options = WDIOF_MAGICCLOSE | WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING, + .identity = "sl28cpld watchdog", +}; + +static struct watchdog_ops sl28cpld_wdt_ops = { + .owner = THIS_MODULE, + .start = sl28cpld_wdt_start, + .stop = sl28cpld_wdt_stop, + .ping = sl28cpld_wdt_ping, + .set_timeout = sl28cpld_wdt_set_timeout, + .get_timeleft = sl28cpld_wdt_get_timeleft, +}; + +static int sl28cpld_wdt_probe(struct platform_device *pdev) +{ + struct watchdog_device *wdd; + struct sl28cpld_wdt *wdt; + unsigned int status; + unsigned int val; + int ret; + + if (!pdev->dev.parent) + return -ENODEV; + + wdt = devm_kzalloc(&pdev->dev, sizeof(*wdt), GFP_KERNEL); + if (!wdt) + return -ENOMEM; + + wdt->regmap = dev_get_regmap(pdev->dev.parent, NULL); + if (!wdt->regmap) + return -ENODEV; + + ret = device_property_read_u32(&pdev->dev, "reg", &wdt->offset); + if (ret) + return -EINVAL; + + wdt->assert_wdt_timeout = device_property_read_bool(&pdev->dev, + "kontron,assert-wdt-timeout-pin"); + + /* initialize struct watchdog_device */ + wdd = &wdt->wdd; + wdd->parent = &pdev->dev; + wdd->info = &sl28cpld_wdt_info; + wdd->ops = &sl28cpld_wdt_ops; + wdd->min_timeout = 1; + wdd->max_timeout = 255; + + watchdog_set_drvdata(wdd, wdt); + watchdog_stop_on_reboot(wdd); + + /* + * Read the status early, in case of an error, we haven't modified the + * hardware. + */ + ret = regmap_read(wdt->regmap, wdt->offset + WDT_CTRL, &status); + if (ret) + return ret; + + /* + * Initial timeout value, may be overwritten by device tree or module + * parmeter in watchdog_init_timeout(). + * + * Reading a zero here means that either the hardware has a default + * value of zero (which is very unlikely and definitely a hardware + * bug) or the bootloader set it to zero. In any case, we handle + * this case gracefully and set out own timeout. + */ + ret = regmap_read(wdt->regmap, wdt->offset + WDT_TIMEOUT, &val); + if (ret) + return ret; + + if (val) + wdd->timeout = val; + else + wdd->timeout = WDT_DEFAULT_TIMEOUT; + + watchdog_init_timeout(wdd, timeout, &pdev->dev); + sl28cpld_wdt_set_timeout(wdd, wdd->timeout); + + /* if the watchdog is locked, we set nowayout */ + if (status & WDT_CTRL_LOCK) + nowayout = true; + watchdog_set_nowayout(wdd, nowayout); + + /* + * If watchdog is already running, keep it enabled, but make + * sure its mode is set correctly. + */ + if (status & WDT_CTRL_EN) { + sl28cpld_wdt_start(wdd); + set_bit(WDOG_HW_RUNNING, &wdd->status); + } + + ret = devm_watchdog_register_device(&pdev->dev, wdd); + if (ret < 0) { + dev_err(&pdev->dev, "failed to register watchdog device\n"); + return ret; + } + + dev_info(&pdev->dev, "initial timeout %d sec%s\n", + wdd->timeout, nowayout ? ", nowayout" : ""); + + return 0; +} + +static const struct of_device_id sl28cpld_wdt_of_match[] = { + { .compatible = "kontron,sl28cpld-wdt" }, + {} +}; +MODULE_DEVICE_TABLE(of, sl28cpld_wdt_of_match); + +static struct platform_driver sl28cpld_wdt_driver = { + .probe = sl28cpld_wdt_probe, + .driver = { + .name = "sl28cpld-wdt", + .of_match_table = sl28cpld_wdt_of_match, + }, +}; +module_platform_driver(sl28cpld_wdt_driver); + +MODULE_DESCRIPTION("sl28cpld Watchdog Driver"); +MODULE_AUTHOR("Michael Walle "); +MODULE_LICENSE("GPL"); From patchwork Thu Aug 13 12:48:25 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Michael Walle X-Patchwork-Id: 11712505 Return-Path: Received: from mail.kernel.org (pdx-korg-mail-1.web.codeaurora.org [172.30.200.123]) by pdx-korg-patchwork-2.web.codeaurora.org (Postfix) with ESMTP id 01CAB109B for ; Thu, 13 Aug 2020 12:51:43 +0000 (UTC) Received: from merlin.infradead.org (merlin.infradead.org [205.233.59.134]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by mail.kernel.org (Postfix) with ESMTPS id C0A5320791 for ; Thu, 13 Aug 2020 12:51:42 +0000 (UTC) Authentication-Results: mail.kernel.org; dkim=pass (2048-bit key) header.d=lists.infradead.org header.i=@lists.infradead.org header.b="Z4pnW3IL"; dkim=fail reason="signature verification failed" (1024-bit key) header.d=walle.cc header.i=@walle.cc header.b="PDCSFBnL" DMARC-Filter: OpenDMARC Filter v1.3.2 mail.kernel.org C0A5320791 Authentication-Results: mail.kernel.org; dmarc=none (p=none dis=none) header.from=walle.cc Authentication-Results: mail.kernel.org; spf=none smtp.mailfrom=linux-arm-kernel-bounces+patchwork-linux-arm=patchwork.kernel.org@lists.infradead.org DKIM-Signature: v=1; a=rsa-sha256; q=dns/txt; c=relaxed/relaxed; d=lists.infradead.org; s=merlin.20170209; h=Sender:Content-Transfer-Encoding: Content-Type:Cc:List-Subscribe:List-Help:List-Post:List-Archive: List-Unsubscribe:List-Id:MIME-Version:References:In-Reply-To:Message-Id:Date: Subject:To:From:Reply-To:Content-ID:Content-Description:Resent-Date: Resent-From:Resent-Sender:Resent-To:Resent-Cc:Resent-Message-ID:List-Owner; bh=zLjX3HGO6sLyWUdDaLutxSFy77y4cOSXVzrQGk3DyD8=; b=Z4pnW3ILi2Fve8srXQQ9SVjsP +iuWDl2LrycvA3CDiU7dztOaGSYtGKWDhjH9VReRFT/I0hkcQcMj6CxlsY1NnCYUEoHx6m58tgJPA InIrUNaDZL1BXjKxBwNp7R3slyCzadG2X8WPp7Rph3qPoJPtPtwZ9wG35736PrdcbXViB5hknSBuR SE1nNGHm4eGfEpUrAggtu+clJDnIBgPi0pyFpwc+0bt5shgzkTJwBezTuIEO60DpPOPxEFE2nrz0F /JlS326c5ovTDYwCclBJF2aN9MMhc0lpV+jPWnMeSXzPR1w+9DpjyvSytEzc7uMI8drE0HUnDqShO /N/c+7KIg==; Received: from localhost ([::1] helo=merlin.infradead.org) by merlin.infradead.org with esmtp (Exim 4.92.3 #3 (Red Hat Linux)) id 1k6Cfp-0004dc-D4; Thu, 13 Aug 2020 12:49:37 +0000 Received: from ssl.serverraum.org ([2a01:4f8:151:8464::1:2]) by merlin.infradead.org with esmtps (Exim 4.92.3 #3 (Red Hat Linux)) id 1k6CfA-0004Q4-5K for linux-arm-kernel@lists.infradead.org; Thu, 13 Aug 2020 12:49:03 +0000 Received: from mwalle01.sab.local. (unknown [213.135.10.150]) (using TLSv1.3 with cipher TLS_AES_256_GCM_SHA384 (256/256 bits) key-exchange ECDHE (P-384) server-signature RSA-PSS (2048 bits) server-digest SHA256) (No client certificate requested) by ssl.serverraum.org (Postfix) with ESMTPSA id 821AD23E46; Thu, 13 Aug 2020 14:48:53 +0200 (CEST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=walle.cc; s=mail2016061301; t=1597322933; h=from:from:reply-to:subject:subject:date:date:message-id:message-id: to:to:cc:cc:mime-version:mime-version: content-transfer-encoding:content-transfer-encoding: in-reply-to:in-reply-to:references:references; bh=W+32geYoPc27uiAHc5NIXXOOS091TcExk3j1uDs2c+U=; b=PDCSFBnLGZRFT5CFA4rAJsnzDQi3oWMmcvwttpU+WUO7YvMbfzhDIov/iPa1Dqxvepgwk5 /F1VKyfJEcXeNXpF5Ga3QIqyc+CfSKFAqy5XPs5jm6Tp/SZ0cvozETqcW1VAN+t5w8uXLq gDXQkxfeS6wX2FiBbwDEvEQ469pAocQ= From: Michael Walle To: linux-gpio@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-hwmon@vger.kernel.org, linux-pwm@vger.kernel.org, linux-watchdog@vger.kernel.org, linux-arm-kernel@lists.infradead.org Subject: [PATCH v8 06/13] pwm: add support for sl28cpld PWM controller Date: Thu, 13 Aug 2020 14:48:25 +0200 Message-Id: <20200813124832.17349-7-michael@walle.cc> X-Mailer: git-send-email 2.20.1 In-Reply-To: <20200813124832.17349-1-michael@walle.cc> References: <20200813124832.17349-1-michael@walle.cc> MIME-Version: 1.0 X-Spam: Yes X-CRM114-Version: 20100106-BlameMichelson ( TRE 0.8.0 (BSD) ) MR-646709E3 X-CRM114-CacheID: sfid-20200813_084856_526089_BD0C7C15 X-CRM114-Status: GOOD ( 43.03 ) X-Spam-Score: -2.5 (--) X-Spam-Report: SpamAssassin version 3.4.4 on merlin.infradead.org summary: Content analysis details: (-2.5 points) pts rule name description ---- ---------------------- -------------------------------------------------- -2.3 RCVD_IN_DNSWL_MED RBL: Sender listed at https://www.dnswl.org/, medium trust [2a01:4f8:151:8464:0:0:1:2 listed in] [list.dnswl.org] 0.0 SPF_HELO_NONE SPF: HELO does not publish an SPF Record -0.0 SPF_PASS SPF: sender matches SPF record -0.1 DKIM_VALID_AU Message has a valid DKIM or DK signature from author's domain 0.1 DKIM_SIGNED Message has a DKIM or DK signature, not necessarily valid -0.1 DKIM_VALID Message has at least one valid DKIM or DK signature -0.1 DKIM_VALID_EF Message has a valid DKIM or DK signature from envelope-from domain X-BeenThere: linux-arm-kernel@lists.infradead.org X-Mailman-Version: 2.1.29 Precedence: list List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Cc: Marc Zyngier , Jean Delvare , Catalin Marinas , Jason Cooper , Will Deacon , Greg Kroah-Hartman , Shawn Guo , Linus Walleij , Andy Shevchenko , Li Yang , Bartosz Golaszewski , Michael Walle , Rob Herring , Thierry Reding , Mark Brown , Pavel Machek , =?utf-8?q?Uwe_Kleine-K=C3=B6nig?= , Thomas Gleixner , Wim Van Sebroeck , Lee Jones , Guenter Roeck Sender: "linux-arm-kernel" Errors-To: linux-arm-kernel-bounces+patchwork-linux-arm=patchwork.kernel.org@lists.infradead.org Add support for the PWM controller of the sl28cpld board management controller. This is part of a multi-function device driver. The controller has one PWM channel and can just generate four distinct frequencies. Signed-off-by: Michael Walle Acked-by: Thierry Reding --- Changes since v7: - added "depends on MFD_SL28CPLD || COMPILE_TEST" - corrected comment about divison - sanitize pwm values before handing them over to the PWM core - check wether we need to write the the duty cycle first to avoid glitches Changes since v6: - added new row "period length" - fixed parenthesis mistake in the description of a calculation - added sl28cpld_pwm_{read/write}() - added more error messages Changes since v5: - added brief description of the PWM hardware implementation - added hardware limitations - dropped the frequency mode table, instead calculate the prescaler value on the fly. - round the requested parameters instead of support just distinct periods. - prefix the macros by SL28CPLD_ to make them less generic - set polarity to PWM_POLARITY_NORMAL and reject inverted polarity requests. - apply the workaround just for prescaler value of 0. - make errors during probing more verbose Changes since v4: - update copyright year - remove #include , suggested by Andy. - make the pwm mode table look nicer, suggested by Lee. - use dev_get_drvdata(chip->dev) instead of container_of(), suggested by Lee. - use whole sentence in comments, suggested by Lee. - renamed the local "struct sl28cpld_pwm" variable to "priv" everywhere, suggested by Lee. - use pwm_{get,set}_relative_duty_cycle(), suggested by Andy. - make the comment about the 250Hz hardware limitation clearer - don't use "if (ret < 0)", but only "if (ret)", suggested by Andy. - don't use KBUID_MODNAME - remove comma in terminator line of the compatible strings list - remove the platform device table Changes since v3: - see cover letter drivers/pwm/Kconfig | 10 ++ drivers/pwm/Makefile | 1 + drivers/pwm/pwm-sl28cpld.c | 269 +++++++++++++++++++++++++++++++++++++ 3 files changed, 280 insertions(+) create mode 100644 drivers/pwm/pwm-sl28cpld.c diff --git a/drivers/pwm/Kconfig b/drivers/pwm/Kconfig index 7dbcf6973d33..3dd9c23997e7 100644 --- a/drivers/pwm/Kconfig +++ b/drivers/pwm/Kconfig @@ -428,6 +428,16 @@ config PWM_SIFIVE To compile this driver as a module, choose M here: the module will be called pwm-sifive. +config PWM_SL28CPLD + tristate "Kontron sl28cpld PWM support" + depends on MFD_SL28CPLD || COMPILE_TEST + help + Generic PWM framework driver for board management controller + found on the Kontron sl28 CPLD. + + To compile this driver as a module, choose M here: the module + will be called pwm-sl28cpld. + config PWM_SPEAR tristate "STMicroelectronics SPEAr PWM support" depends on PLAT_SPEAR || COMPILE_TEST diff --git a/drivers/pwm/Makefile b/drivers/pwm/Makefile index 2c2ba0a03557..cbdcd55d69ee 100644 --- a/drivers/pwm/Makefile +++ b/drivers/pwm/Makefile @@ -40,6 +40,7 @@ obj-$(CONFIG_PWM_RENESAS_TPU) += pwm-renesas-tpu.o obj-$(CONFIG_PWM_ROCKCHIP) += pwm-rockchip.o obj-$(CONFIG_PWM_SAMSUNG) += pwm-samsung.o obj-$(CONFIG_PWM_SIFIVE) += pwm-sifive.o +obj-$(CONFIG_PWM_SL28CPLD) += pwm-sl28cpld.o obj-$(CONFIG_PWM_SPEAR) += pwm-spear.o obj-$(CONFIG_PWM_SPRD) += pwm-sprd.o obj-$(CONFIG_PWM_STI) += pwm-sti.o diff --git a/drivers/pwm/pwm-sl28cpld.c b/drivers/pwm/pwm-sl28cpld.c new file mode 100644 index 000000000000..29e338368d3e --- /dev/null +++ b/drivers/pwm/pwm-sl28cpld.c @@ -0,0 +1,269 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * sl28cpld PWM driver + * + * Copyright (c) 2020 Michael Walle + * + * There is no public datasheet available for this PWM core. But it is easy + * enough to be briefly explained. It consists of one 8-bit counter. The PWM + * supports four distinct frequencies by selecting when to reset the counter. + * With the prescaler setting you can select which bit of the counter is used + * to reset it. This implies that the higher the frequency the less remaining + * bits are available for the actual counter. + * + * Let cnt[7:0] be the counter, clocked at 32kHz: + * +-----------+--------+--------------+-----------+---------------+ + * | prescaler | reset | counter bits | frequency | period length | + * +-----------+--------+--------------+-----------+---------------+ + * | 0 | cnt[7] | cnt[6:0] | 250 Hz | 4000000 ns | + * | 1 | cnt[6] | cnt[5:0] | 500 Hz | 2000000 ns | + * | 2 | cnt[5] | cnt[4:0] | 1 kHz | 1000000 ns | + * | 3 | cnt[4] | cnt[3:0] | 2 kHz | 500000 ns | + * +-----------+--------+--------------+-----------+---------------+ + * + * Limitations: + * - The hardware cannot generate a 100% duty cycle if the prescaler is 0. + * - The hardware cannot atomically set the prescaler and the counter value, + * which might lead to glitches and inconsistent states if a write fails. + * - The counter is not reset if you switch the prescaler which leads + * to glitches, too. + * - The duty cycle will switch immediately and not after a complete cycle. + * - Depending on the actual implementation, disabling the PWM might have + * side effects. For example, if the output pin is shared with a GPIO pin + * it will automatically switch back to GPIO mode. + */ + +#include +#include +#include +#include +#include +#include +#include + +/* + * PWM timer block registers. + */ +#define SL28CPLD_PWM_CTRL 0x00 +#define SL28CPLD_PWM_CTRL_ENABLE BIT(7) +#define SL28CPLD_PWM_CTRL_PRESCALER_MASK GENMASK(1, 0) +#define SL28CPLD_PWM_CYCLE 0x01 +#define SL28CPLD_PWM_CYCLE_MAX GENMASK(6, 0) + +#define SL28CPLD_PWM_CLK 32000 /* 32 kHz */ +#define SL28CPLD_PWM_MAX_DUTY_CYCLE(prescaler) (1 << (7 - (prescaler))) +#define SL28CPLD_PWM_PERIOD(prescaler) \ + (NSEC_PER_SEC / SL28CPLD_PWM_CLK * SL28CPLD_PWM_MAX_DUTY_CYCLE(prescaler)) + +/* + * We calculate the duty cycle like this: + * duty_cycle_ns = pwm_cycle_reg * max_period_ns / max_duty_cycle + * + * With + * max_period_ns = 1 << (7 - prescaler) / pwm_clk * NSEC_PER_SEC + * max_duty_cycle = 1 << (7 - prescaler) + * this then simplifies to: + * duty_cycle_ns = pwm_cycle_reg / pwm_clk * NSEC_PER_SEC + * + * NSEC_PER_SEC is a multiple of SL28CPLD_PWM_CLK, therefore we're not losing + * precision by doing the divison first. + */ +#define SL28CPLD_PWM_TO_DUTY_CYCLE(reg) \ + (NSEC_PER_SEC / SL28CPLD_PWM_CLK * (reg)) +#define SL28CPLD_PWM_FROM_DUTY_CYCLE(duty_cycle) \ + (DIV_ROUND_DOWN_ULL((duty_cycle), NSEC_PER_SEC / SL28CPLD_PWM_CLK)) + +#define sl28cpld_pwm_read(priv, reg, val) \ + regmap_read((priv)->regmap, (priv)->offset + (reg), (val)) +#define sl28cpld_pwm_write(priv, reg, val) \ + regmap_write((priv)->regmap, (priv)->offset + (reg), (val)) + +struct sl28cpld_pwm { + struct pwm_chip pwm_chip; + struct regmap *regmap; + u32 offset; +}; + +static void sl28cpld_pwm_get_state(struct pwm_chip *chip, + struct pwm_device *pwm, + struct pwm_state *state) +{ + struct sl28cpld_pwm *priv = dev_get_drvdata(chip->dev); + unsigned int reg; + int prescaler; + + sl28cpld_pwm_read(priv, SL28CPLD_PWM_CTRL, ®); + + state->enabled = reg & SL28CPLD_PWM_CTRL_ENABLE; + + prescaler = FIELD_GET(SL28CPLD_PWM_CTRL_PRESCALER_MASK, reg); + state->period = SL28CPLD_PWM_PERIOD(prescaler); + + sl28cpld_pwm_read(priv, SL28CPLD_PWM_CYCLE, ®); + state->duty_cycle = SL28CPLD_PWM_TO_DUTY_CYCLE(reg); + state->polarity = PWM_POLARITY_NORMAL; + + /* + * Sanitize values for the PWM core. Depending on the prescaler it + * might happen that we calculate a duty_cycle greater than the actual + * period. This might happen if someone (e.g. the bootloader) sets an + * invalid combination of values. The behavior of the hardware is + * undefined in this case. But we need to report sane values back to + * the PWM core. + */ + state->duty_cycle = min(state->duty_cycle, state->period); +} + +static int sl28cpld_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm, + const struct pwm_state *state) +{ + struct sl28cpld_pwm *priv = dev_get_drvdata(chip->dev); + unsigned int cycle, prescaler; + bool write_duty_cycle_first; + int ret; + u8 ctrl; + + /* Polarity inversion is not supported */ + if (state->polarity != PWM_POLARITY_NORMAL) + return -EINVAL; + + /* + * Calculate the prescaler. Pick the biggest period that isn't + * bigger than the requested period. + */ + prescaler = DIV_ROUND_UP_ULL(SL28CPLD_PWM_PERIOD(0), state->period); + prescaler = order_base_2(prescaler); + + if (prescaler > field_max(SL28CPLD_PWM_CTRL_PRESCALER_MASK)) + return -ERANGE; + + ctrl = FIELD_PREP(SL28CPLD_PWM_CTRL_PRESCALER_MASK, prescaler); + if (state->enabled) + ctrl |= SL28CPLD_PWM_CTRL_ENABLE; + + cycle = SL28CPLD_PWM_FROM_DUTY_CYCLE(state->duty_cycle); + cycle = min_t(unsigned int, cycle, SL28CPLD_PWM_MAX_DUTY_CYCLE(prescaler)); + + /* + * Work around the hardware limitation. See also above. Trap 100% duty + * cycle if the prescaler is 0. Set prescaler to 1 instead. We don't + * care about the frequency because its "all-one" in either case. + * + * We don't need to check the actual prescaler setting, because only + * if the prescaler is 0 we can have this particular value. + */ + if (cycle == SL28CPLD_PWM_MAX_DUTY_CYCLE(0)) { + ctrl &= ~SL28CPLD_PWM_CTRL_PRESCALER_MASK; + ctrl |= FIELD_PREP(SL28CPLD_PWM_CTRL_PRESCALER_MASK, 1); + cycle = SL28CPLD_PWM_MAX_DUTY_CYCLE(1); + } + + /* + * To avoid glitches when we switch the prescaler, we have to make sure + * we have a valid duty cycle for the new mode. + * + * Take the current prescaler (or the current period length) into + * account to decide whether we have to write the duty cycle or the new + * prescaler first. If the period length is decreasing we have to + * write the duty cycle first. + */ + write_duty_cycle_first = pwm->state.period > state->period; + + if (write_duty_cycle_first) { + ret = sl28cpld_pwm_write(priv, SL28CPLD_PWM_CYCLE, cycle); + if (ret) + return ret; + } + + ret = sl28cpld_pwm_write(priv, SL28CPLD_PWM_CTRL, ctrl); + if (ret) + return ret; + + if (!write_duty_cycle_first) { + ret = sl28cpld_pwm_write(priv, SL28CPLD_PWM_CYCLE, cycle); + if (ret) + return ret; + } + + return 0; +} + +static const struct pwm_ops sl28cpld_pwm_ops = { + .apply = sl28cpld_pwm_apply, + .get_state = sl28cpld_pwm_get_state, + .owner = THIS_MODULE, +}; + +static int sl28cpld_pwm_probe(struct platform_device *pdev) +{ + struct sl28cpld_pwm *priv; + struct pwm_chip *chip; + int ret; + + if (!pdev->dev.parent) { + dev_err(&pdev->dev, "no parent device\n"); + return -ENODEV; + } + + priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + priv->regmap = dev_get_regmap(pdev->dev.parent, NULL); + if (!priv->regmap) { + dev_err(&pdev->dev, "could not get parent regmap\n"); + return -ENODEV; + } + + ret = device_property_read_u32(&pdev->dev, "reg", &priv->offset); + if (ret) { + dev_err(&pdev->dev, "no 'reg' property found (%pe)\n", + ERR_PTR(ret)); + return -EINVAL; + } + + /* Initialize the pwm_chip structure */ + chip = &priv->pwm_chip; + chip->dev = &pdev->dev; + chip->ops = &sl28cpld_pwm_ops; + chip->base = -1; + chip->npwm = 1; + + ret = pwmchip_add(&priv->pwm_chip); + if (ret) { + dev_err(&pdev->dev, "failed to add PWM chip (%pe)", + ERR_PTR(ret)); + return ret; + } + + platform_set_drvdata(pdev, priv); + + return 0; +} + +static int sl28cpld_pwm_remove(struct platform_device *pdev) +{ + struct sl28cpld_pwm *priv = platform_get_drvdata(pdev); + + return pwmchip_remove(&priv->pwm_chip); +} + +static const struct of_device_id sl28cpld_pwm_of_match[] = { + { .compatible = "kontron,sl28cpld-pwm" }, + {} +}; +MODULE_DEVICE_TABLE(of, sl28cpld_pwm_of_match); + +static struct platform_driver sl28cpld_pwm_driver = { + .probe = sl28cpld_pwm_probe, + .remove = sl28cpld_pwm_remove, + .driver = { + .name = "sl28cpld-pwm", + .of_match_table = sl28cpld_pwm_of_match, + }, +}; +module_platform_driver(sl28cpld_pwm_driver); + +MODULE_DESCRIPTION("sl28cpld PWM Driver"); +MODULE_AUTHOR("Michael Walle "); +MODULE_LICENSE("GPL"); From patchwork Thu Aug 13 12:48:26 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Michael Walle X-Patchwork-Id: 11712501 Return-Path: Received: from mail.kernel.org (pdx-korg-mail-1.web.codeaurora.org [172.30.200.123]) by pdx-korg-patchwork-2.web.codeaurora.org (Postfix) with ESMTP id 71BC613B6 for ; Thu, 13 Aug 2020 12:51:07 +0000 (UTC) Received: from merlin.infradead.org (merlin.infradead.org [205.233.59.134]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by mail.kernel.org (Postfix) with ESMTPS id 4A58A20791 for ; Thu, 13 Aug 2020 12:51:07 +0000 (UTC) Authentication-Results: mail.kernel.org; dkim=pass (2048-bit key) header.d=lists.infradead.org header.i=@lists.infradead.org header.b="CFpAzPMl"; dkim=fail reason="signature verification failed" (1024-bit key) header.d=walle.cc header.i=@walle.cc header.b="fOSX/TpX" DMARC-Filter: OpenDMARC Filter v1.3.2 mail.kernel.org 4A58A20791 Authentication-Results: mail.kernel.org; dmarc=none (p=none dis=none) header.from=walle.cc Authentication-Results: mail.kernel.org; spf=none smtp.mailfrom=linux-arm-kernel-bounces+patchwork-linux-arm=patchwork.kernel.org@lists.infradead.org DKIM-Signature: v=1; a=rsa-sha256; q=dns/txt; c=relaxed/relaxed; d=lists.infradead.org; s=merlin.20170209; h=Sender:Content-Transfer-Encoding: Content-Type:Cc:List-Subscribe:List-Help:List-Post:List-Archive: List-Unsubscribe:List-Id:MIME-Version:References:In-Reply-To:Message-Id:Date: Subject:To:From:Reply-To:Content-ID:Content-Description:Resent-Date: Resent-From:Resent-Sender:Resent-To:Resent-Cc:Resent-Message-ID:List-Owner; bh=5ahCtdt+yH4mvD55rsY651IaQ/ztAi5oplo6zY5NmSk=; b=CFpAzPMlrSFNBbiPKSGPbaJNH c5AIA9BSynubCsuywMhA8dIj69YMdlR5D52lQf/vTaG9wRR8fmG2rEZWKZpk+6eJjnRAifyu/a4YP ZTbSn3zy5/R4a8hy8lQzqYSKmvS8NJqgd8kzYaTWEbvgYn1UEv2K7L6hgyqgJ6R8U0boR7zzb50fL FntSo0JxL4e3U7lgnw7BZH7cACA5va82iAbtXQR+VPVU9lvQtfQxGdnuDnvmRp8jAlUzCT5/NpXQn MglHCTpk8nPm6ZzXVH5qDMApu2DMpWs7McIF2zHIyEznUB6lh+7VSNQPdk4Mlpf1GzW7ZuzbJtZtn L0Vmw5RJw==; Received: from localhost ([::1] helo=merlin.infradead.org) by merlin.infradead.org with esmtp (Exim 4.92.3 #3 (Red Hat Linux)) id 1k6CfT-0004WO-8q; Thu, 13 Aug 2020 12:49:15 +0000 Received: from ssl.serverraum.org ([176.9.125.105]) by merlin.infradead.org with esmtps (Exim 4.92.3 #3 (Red Hat Linux)) id 1k6CfA-0004Q2-3l for linux-arm-kernel@lists.infradead.org; Thu, 13 Aug 2020 12:49:00 +0000 Received: from mwalle01.sab.local. (unknown [213.135.10.150]) (using TLSv1.3 with cipher TLS_AES_256_GCM_SHA384 (256/256 bits) key-exchange ECDHE (P-384) server-signature RSA-PSS (2048 bits) server-digest SHA256) (No client certificate requested) by ssl.serverraum.org (Postfix) with ESMTPSA id F031F23E47; Thu, 13 Aug 2020 14:48:53 +0200 (CEST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=walle.cc; s=mail2016061301; t=1597322934; h=from:from:reply-to:subject:subject:date:date:message-id:message-id: to:to:cc:cc:mime-version:mime-version: content-transfer-encoding:content-transfer-encoding: in-reply-to:in-reply-to:references:references; bh=Lm790sIUbpqln4o0pGCCNKP2Vol6TaFB4WWESHJXYVk=; b=fOSX/TpX9vDi34ig74zPaaGFuoKHmDiIHnhs5WuiHnSZabX90q2Vex0riQwitfFBYEu78k ELv00eCFDbJK5I5ci9gXS/iKR2m4z4sY+KTPorMBn9nXWkhwXuFxXSUGV8LndxNv2j9O3i gDSDlKg2pkI+i6YEoQSBpLjWGUVvc18= From: Michael Walle To: linux-gpio@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-hwmon@vger.kernel.org, linux-pwm@vger.kernel.org, linux-watchdog@vger.kernel.org, linux-arm-kernel@lists.infradead.org Subject: [PATCH v8 07/13] gpio: add support for the sl28cpld GPIO controller Date: Thu, 13 Aug 2020 14:48:26 +0200 Message-Id: <20200813124832.17349-8-michael@walle.cc> X-Mailer: git-send-email 2.20.1 In-Reply-To: <20200813124832.17349-1-michael@walle.cc> References: <20200813124832.17349-1-michael@walle.cc> MIME-Version: 1.0 X-Spam: Yes X-CRM114-Version: 20100106-BlameMichelson ( TRE 0.8.0 (BSD) ) MR-646709E3 X-CRM114-CacheID: sfid-20200813_084856_390512_A479DF92 X-CRM114-Status: GOOD ( 30.05 ) X-Spam-Score: -2.5 (--) X-Spam-Report: SpamAssassin version 3.4.4 on merlin.infradead.org summary: Content analysis details: (-2.5 points) pts rule name description ---- ---------------------- -------------------------------------------------- -2.3 RCVD_IN_DNSWL_MED RBL: Sender listed at https://www.dnswl.org/, medium trust [176.9.125.105 listed in list.dnswl.org] 0.0 SPF_HELO_NONE SPF: HELO does not publish an SPF Record -0.0 SPF_PASS SPF: sender matches SPF record -0.1 DKIM_VALID_AU Message has a valid DKIM or DK signature from author's domain 0.1 DKIM_SIGNED Message has a DKIM or DK signature, not necessarily valid -0.1 DKIM_VALID Message has at least one valid DKIM or DK signature -0.1 DKIM_VALID_EF Message has a valid DKIM or DK signature from envelope-from domain X-BeenThere: linux-arm-kernel@lists.infradead.org X-Mailman-Version: 2.1.29 Precedence: list List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Cc: Marc Zyngier , Jean Delvare , Catalin Marinas , Jason Cooper , Will Deacon , Greg Kroah-Hartman , Shawn Guo , Linus Walleij , Andy Shevchenko , Li Yang , Bartosz Golaszewski , Michael Walle , Rob Herring , Thierry Reding , Mark Brown , Pavel Machek , =?utf-8?q?Uwe_Kleine-K=C3=B6nig?= , Thomas Gleixner , Wim Van Sebroeck , Lee Jones , Guenter Roeck Sender: "linux-arm-kernel" Errors-To: linux-arm-kernel-bounces+patchwork-linux-arm=patchwork.kernel.org@lists.infradead.org Add support for the GPIO controller of the sl28 board management controller. This driver is part of a multi-function device. A controller has 8 lines. There are three different flavors: full-featured GPIO with interrupt support, input-only and output-only. Signed-off-by: Michael Walle Reviewed-by: Linus Walleij Reviewed-by: Andy Shevchenko --- Changes since v7: - added "depends on MFD_SL28CPLD || COMPILE_TEST" Changes since v6: - none Changes since v5: - added "select REGMAP_IRQ" Changes since v4: - update copyright year - remove #include , suggested by Andy. - use device_get_match_data(), suggested by Andy. - drop the irq_support variable, instead call _init_irq() directly, suggested by Andy. - also move the irq code a bit around to make it look nicer - drop "struct sl28cpld_gpio". We don't need to actually store the irq_chip and irq_chip_data, everything is device resource managed. - use 100 chars line limit, suggested by Andy. - remove the platform device table - don't use KBUID_MODNAME Changes since v3: - see cover letter drivers/gpio/Kconfig | 12 +++ drivers/gpio/Makefile | 1 + drivers/gpio/gpio-sl28cpld.c | 161 +++++++++++++++++++++++++++++++++++ 3 files changed, 174 insertions(+) create mode 100644 drivers/gpio/gpio-sl28cpld.c diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig index 8030fd91a3cc..3799cb6048a2 100644 --- a/drivers/gpio/Kconfig +++ b/drivers/gpio/Kconfig @@ -1223,6 +1223,18 @@ config GPIO_RC5T583 This driver provides the support for driving/reading the gpio pins of RC5T583 device through standard gpio library. +config GPIO_SL28CPLD + tristate "Kontron sl28cpld GPIO support" + depends on MFD_SL28CPLD || COMPILE_TEST + select GPIO_REGMAP + select GPIOLIB_IRQCHIP + select REGMAP_IRQ + help + This enables support for the GPIOs found on the Kontron sl28 CPLD. + + This driver can also be built as a module. If so, the module will be + called gpio-sl28cpld. + config GPIO_STMPE bool "STMPE GPIOs" depends on MFD_STMPE diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile index 4f9abff4f2dc..c3a4e7c94a91 100644 --- a/drivers/gpio/Makefile +++ b/drivers/gpio/Makefile @@ -132,6 +132,7 @@ obj-$(CONFIG_GPIO_SCH311X) += gpio-sch311x.o obj-$(CONFIG_GPIO_SCH) += gpio-sch.o obj-$(CONFIG_GPIO_SIFIVE) += gpio-sifive.o obj-$(CONFIG_GPIO_SIOX) += gpio-siox.o +obj-$(CONFIG_GPIO_SL28CPLD) += gpio-sl28cpld.o obj-$(CONFIG_GPIO_SODAVILLE) += gpio-sodaville.o obj-$(CONFIG_GPIO_SPEAR_SPICS) += gpio-spear-spics.o obj-$(CONFIG_GPIO_SPRD) += gpio-sprd.o diff --git a/drivers/gpio/gpio-sl28cpld.c b/drivers/gpio/gpio-sl28cpld.c new file mode 100644 index 000000000000..889b8f5622c2 --- /dev/null +++ b/drivers/gpio/gpio-sl28cpld.c @@ -0,0 +1,161 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * sl28cpld GPIO driver + * + * Copyright 2020 Michael Walle + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +/* GPIO flavor */ +#define GPIO_REG_DIR 0x00 +#define GPIO_REG_OUT 0x01 +#define GPIO_REG_IN 0x02 +#define GPIO_REG_IE 0x03 +#define GPIO_REG_IP 0x04 + +/* input-only flavor */ +#define GPI_REG_IN 0x00 + +/* output-only flavor */ +#define GPO_REG_OUT 0x00 + +enum sl28cpld_gpio_type { + SL28CPLD_GPIO = 1, + SL28CPLD_GPI, + SL28CPLD_GPO, +}; + +static const struct regmap_irq sl28cpld_gpio_irqs[] = { + REGMAP_IRQ_REG_LINE(0, 8), + REGMAP_IRQ_REG_LINE(1, 8), + REGMAP_IRQ_REG_LINE(2, 8), + REGMAP_IRQ_REG_LINE(3, 8), + REGMAP_IRQ_REG_LINE(4, 8), + REGMAP_IRQ_REG_LINE(5, 8), + REGMAP_IRQ_REG_LINE(6, 8), + REGMAP_IRQ_REG_LINE(7, 8), +}; + +static int sl28cpld_gpio_irq_init(struct platform_device *pdev, + unsigned int base, + struct gpio_regmap_config *config) +{ + struct regmap_irq_chip_data *irq_data; + struct regmap_irq_chip *irq_chip; + struct device *dev = &pdev->dev; + int irq, ret; + + if (!device_property_read_bool(dev, "interrupt-controller")) + return 0; + + irq = platform_get_irq(pdev, 0); + if (irq < 0) + return irq; + + irq_chip = devm_kzalloc(dev, sizeof(*irq_chip), GFP_KERNEL); + if (!irq_chip) + return -ENOMEM; + + irq_chip->name = "sl28cpld-gpio-irq", + irq_chip->irqs = sl28cpld_gpio_irqs; + irq_chip->num_irqs = ARRAY_SIZE(sl28cpld_gpio_irqs); + irq_chip->num_regs = 1; + irq_chip->status_base = base + GPIO_REG_IP; + irq_chip->mask_base = base + GPIO_REG_IE; + irq_chip->mask_invert = true, + irq_chip->ack_base = base + GPIO_REG_IP; + + ret = devm_regmap_add_irq_chip_fwnode(dev, dev_fwnode(dev), + config->regmap, irq, + IRQF_SHARED | IRQF_ONESHOT, + 0, irq_chip, &irq_data); + if (ret) + return ret; + + config->irq_domain = regmap_irq_get_domain(irq_data); + + return 0; +} + +static int sl28cpld_gpio_probe(struct platform_device *pdev) +{ + struct gpio_regmap_config config = {0}; + enum sl28cpld_gpio_type type; + struct regmap *regmap; + u32 base; + int ret; + + if (!pdev->dev.parent) + return -ENODEV; + + type = (uintptr_t)device_get_match_data(&pdev->dev); + if (!type) + return -ENODEV; + + ret = device_property_read_u32(&pdev->dev, "reg", &base); + if (ret) + return -EINVAL; + + regmap = dev_get_regmap(pdev->dev.parent, NULL); + if (!regmap) + return -ENODEV; + + config.regmap = regmap; + config.parent = &pdev->dev; + config.ngpio = 8; + + switch (type) { + case SL28CPLD_GPIO: + config.reg_dat_base = base + GPIO_REG_IN; + config.reg_set_base = base + GPIO_REG_OUT; + /* reg_dir_out_base might be zero */ + config.reg_dir_out_base = GPIO_REGMAP_ADDR(base + GPIO_REG_DIR); + + /* This type supports interrupts */ + ret = sl28cpld_gpio_irq_init(pdev, base, &config); + if (ret) + return ret; + break; + case SL28CPLD_GPO: + config.reg_set_base = base + GPO_REG_OUT; + break; + case SL28CPLD_GPI: + config.reg_dat_base = base + GPI_REG_IN; + break; + default: + dev_err(&pdev->dev, "unknown type %d\n", type); + return -ENODEV; + } + + return PTR_ERR_OR_ZERO(devm_gpio_regmap_register(&pdev->dev, &config)); +} + +static const struct of_device_id sl28cpld_gpio_of_match[] = { + { .compatible = "kontron,sl28cpld-gpio", .data = (void *)SL28CPLD_GPIO }, + { .compatible = "kontron,sl28cpld-gpi", .data = (void *)SL28CPLD_GPI }, + { .compatible = "kontron,sl28cpld-gpo", .data = (void *)SL28CPLD_GPO }, + {} +}; +MODULE_DEVICE_TABLE(of, sl28cpld_gpio_of_match); + +static struct platform_driver sl28cpld_gpio_driver = { + .probe = sl28cpld_gpio_probe, + .driver = { + .name = "sl28cpld-gpio", + .of_match_table = sl28cpld_gpio_of_match, + }, +}; +module_platform_driver(sl28cpld_gpio_driver); + +MODULE_DESCRIPTION("sl28cpld GPIO Driver"); +MODULE_AUTHOR("Michael Walle "); +MODULE_LICENSE("GPL"); From patchwork Thu Aug 13 12:48:27 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Michael Walle X-Patchwork-Id: 11712503 Return-Path: Received: from mail.kernel.org (pdx-korg-mail-1.web.codeaurora.org [172.30.200.123]) by pdx-korg-patchwork-2.web.codeaurora.org (Postfix) with ESMTP id 03B98109B for ; Thu, 13 Aug 2020 12:51:23 +0000 (UTC) Received: from merlin.infradead.org (merlin.infradead.org [205.233.59.134]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by mail.kernel.org (Postfix) with ESMTPS id D05A120791 for ; Thu, 13 Aug 2020 12:51:22 +0000 (UTC) Authentication-Results: mail.kernel.org; dkim=pass (2048-bit key) header.d=lists.infradead.org header.i=@lists.infradead.org header.b="GQy/W6Bx"; dkim=fail reason="signature verification failed" (1024-bit key) header.d=walle.cc header.i=@walle.cc header.b="WoPGR1l+" DMARC-Filter: OpenDMARC Filter v1.3.2 mail.kernel.org D05A120791 Authentication-Results: mail.kernel.org; dmarc=none (p=none dis=none) header.from=walle.cc Authentication-Results: mail.kernel.org; spf=none smtp.mailfrom=linux-arm-kernel-bounces+patchwork-linux-arm=patchwork.kernel.org@lists.infradead.org DKIM-Signature: v=1; a=rsa-sha256; q=dns/txt; c=relaxed/relaxed; d=lists.infradead.org; s=merlin.20170209; h=Sender:Content-Transfer-Encoding: Content-Type:Cc:List-Subscribe:List-Help:List-Post:List-Archive: List-Unsubscribe:List-Id:MIME-Version:References:In-Reply-To:Message-Id:Date: Subject:To:From:Reply-To:Content-ID:Content-Description:Resent-Date: Resent-From:Resent-Sender:Resent-To:Resent-Cc:Resent-Message-ID:List-Owner; bh=2d8XOV6rkEvh7HfK6UFRNMK+RqeWjhn/Fzqs+SWneT4=; b=GQy/W6BxSNa7pwxm2UgeVfm/1 TXr6UsxvXkYSbj687V9idWQ0LOuoNAiJZj4EhJVaPR38cfrOKidVWJYoLU5Mij/jUZCOk6FVB2Bn5 J00SjBL/H60ksNG7jEpjoP4nQ5TjVCRCKFa4yIB5QQ85bxs8KUmYfYr9wfm4lsrIoidV6VOxpiPoi a40pbB3rNY8aXnSRe+kFaWOiY5UHMHtWPtxgy7yHekR1ReGqJaGroinaiT0OQv9M54jj0RIpzVdhT Kt/DU19jvbMmicLA2i9NfsymjS5Q4g1joEKVtSYcfxwZ+kIyL5lxfSbs+zhoEhLpREmG3vRj4t6g+ seHKoh1IA==; Received: from localhost ([::1] helo=merlin.infradead.org) by merlin.infradead.org with esmtp (Exim 4.92.3 #3 (Red Hat Linux)) id 1k6Cfb-0004Ym-Ex; Thu, 13 Aug 2020 12:49:23 +0000 Received: from ssl.serverraum.org ([176.9.125.105]) by merlin.infradead.org with esmtps (Exim 4.92.3 #3 (Red Hat Linux)) id 1k6CfA-0004QD-HR for linux-arm-kernel@lists.infradead.org; Thu, 13 Aug 2020 12:49:02 +0000 Received: from mwalle01.sab.local. (unknown [213.135.10.150]) (using TLSv1.3 with cipher TLS_AES_256_GCM_SHA384 (256/256 bits) key-exchange ECDHE (P-384) server-signature RSA-PSS (2048 bits) server-digest SHA256) (No client certificate requested) by ssl.serverraum.org (Postfix) with ESMTPSA id C75BA23E49; Thu, 13 Aug 2020 14:48:54 +0200 (CEST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=walle.cc; s=mail2016061301; t=1597322935; h=from:from:reply-to:subject:subject:date:date:message-id:message-id: to:to:cc:cc:mime-version:mime-version: content-transfer-encoding:content-transfer-encoding: in-reply-to:in-reply-to:references:references; bh=CJgqjcuSVV7lxyxe2zgFsffHgSpz/scd2LODCYPpdIU=; b=WoPGR1l++ttoQPTeVK6oDAy29epwF7Mowss+21yVgny3JR42fnCSbf5iJS3A7OEo5OFd0R qROtWNCOrpHrAdhABj3LeVzNcpCSmdjhhS0jS9N0Fr4fvN717fqlaNNe/E+Cc9eictEcMn 0odAwXLeUm6W1RwAeG7Dk1cio9I8yVc= From: Michael Walle To: linux-gpio@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-hwmon@vger.kernel.org, linux-pwm@vger.kernel.org, linux-watchdog@vger.kernel.org, linux-arm-kernel@lists.infradead.org Subject: [PATCH v8 08/13] hwmon: add support for the sl28cpld hardware monitoring controller Date: Thu, 13 Aug 2020 14:48:27 +0200 Message-Id: <20200813124832.17349-9-michael@walle.cc> X-Mailer: git-send-email 2.20.1 In-Reply-To: <20200813124832.17349-1-michael@walle.cc> References: <20200813124832.17349-1-michael@walle.cc> MIME-Version: 1.0 X-Spam: Yes X-CRM114-Version: 20100106-BlameMichelson ( TRE 0.8.0 (BSD) ) MR-646709E3 X-CRM114-CacheID: sfid-20200813_084856_888378_47FC3A33 X-CRM114-Status: GOOD ( 32.81 ) X-Spam-Score: -2.5 (--) X-Spam-Report: SpamAssassin version 3.4.4 on merlin.infradead.org summary: Content analysis details: (-2.5 points) pts rule name description ---- ---------------------- -------------------------------------------------- -2.3 RCVD_IN_DNSWL_MED RBL: Sender listed at https://www.dnswl.org/, medium trust [176.9.125.105 listed in list.dnswl.org] 0.0 SPF_HELO_NONE SPF: HELO does not publish an SPF Record -0.0 SPF_PASS SPF: sender matches SPF record -0.1 DKIM_VALID_AU Message has a valid DKIM or DK signature from author's domain 0.1 DKIM_SIGNED Message has a DKIM or DK signature, not necessarily valid -0.1 DKIM_VALID Message has at least one valid DKIM or DK signature -0.1 DKIM_VALID_EF Message has a valid DKIM or DK signature from envelope-from domain X-BeenThere: linux-arm-kernel@lists.infradead.org X-Mailman-Version: 2.1.29 Precedence: list List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Cc: Marc Zyngier , Jean Delvare , Catalin Marinas , Jason Cooper , Will Deacon , Greg Kroah-Hartman , Shawn Guo , Linus Walleij , Andy Shevchenko , Li Yang , Bartosz Golaszewski , Michael Walle , Rob Herring , Thierry Reding , Mark Brown , Pavel Machek , =?utf-8?q?Uwe_Kleine-K=C3=B6nig?= , Thomas Gleixner , Wim Van Sebroeck , Lee Jones , Guenter Roeck Sender: "linux-arm-kernel" Errors-To: linux-arm-kernel-bounces+patchwork-linux-arm=patchwork.kernel.org@lists.infradead.org Add support for the hardware monitoring controller of the sl28cpld board management controller. This driver is part of a multi-function device. Signed-off-by: Michael Walle Acked-by: Guenter Roeck Reviewed-by: Andy Shevchenko --- Changes since v7: - added "depends on MFD_SL28CPLD || COMPILE_TEST" Changes since v6: - none Changes since v5: - none Changes since v4: - update copyright year - remove #include , suggested by Andy. - use PTR_ERR_OR_ZERO(), suggested by Andy. - remove the platform device table - don't use KBUID_MODNAME Changes since v3: - see cover letter Documentation/hwmon/index.rst | 1 + Documentation/hwmon/sl28cpld.rst | 36 ++++++++ drivers/hwmon/Kconfig | 10 +++ drivers/hwmon/Makefile | 1 + drivers/hwmon/sl28cpld-hwmon.c | 142 +++++++++++++++++++++++++++++++ 5 files changed, 190 insertions(+) create mode 100644 Documentation/hwmon/sl28cpld.rst create mode 100644 drivers/hwmon/sl28cpld-hwmon.c diff --git a/Documentation/hwmon/index.rst b/Documentation/hwmon/index.rst index 750d3a975d82..d90c43c82936 100644 --- a/Documentation/hwmon/index.rst +++ b/Documentation/hwmon/index.rst @@ -154,6 +154,7 @@ Hardware Monitoring Kernel Drivers sht3x shtc1 sis5595 + sl28cpld smm665 smsc47b397 smsc47m192 diff --git a/Documentation/hwmon/sl28cpld.rst b/Documentation/hwmon/sl28cpld.rst new file mode 100644 index 000000000000..7ed65f78250c --- /dev/null +++ b/Documentation/hwmon/sl28cpld.rst @@ -0,0 +1,36 @@ +.. SPDX-License-Identifier: GPL-2.0-only + +Kernel driver sl28cpld +====================== + +Supported chips: + + * Kontron sl28cpld + + Prefix: 'sl28cpld' + + Datasheet: not available + +Authors: Michael Walle + +Description +----------- + +The sl28cpld is a board management controller which also exposes a hardware +monitoring controller. At the moment this controller supports a single fan +supervisor. In the future there might be other flavours and additional +hardware monitoring might be supported. + +The fan supervisor has a 7 bit counter register and a counter period of 1 +second. If the 7 bit counter overflows, the supervisor will automatically +switch to x8 mode to support a wider input range at the loss of +granularity. + +Sysfs entries +------------- + +The following attributes are supported. + +======================= ======================================================== +fan1_input Fan RPM. Assuming 2 pulses per revolution. +======================= ======================================================== diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig index 8dc28b26916e..d98c0a6860d1 100644 --- a/drivers/hwmon/Kconfig +++ b/drivers/hwmon/Kconfig @@ -1479,6 +1479,16 @@ config SENSORS_RASPBERRYPI_HWMON This driver can also be built as a module. If so, the module will be called raspberrypi-hwmon. +config SENSORS_SL28CPLD + tristate "Kontron sl28cpld hardware monitoring driver" + depends on MFD_SL28CPLD || COMPILE_TEST + help + If you say yes here you get support for the fan supervisor of the + sl28cpld board management controller. + + This driver can also be built as a module. If so, the module + will be called sl28cpld-hwmon. + config SENSORS_SHT15 tristate "Sensiron humidity and temperature sensors. SHT15 and compat." depends on GPIOLIB || COMPILE_TEST diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile index a8f4b35b136b..dee8511f9348 100644 --- a/drivers/hwmon/Makefile +++ b/drivers/hwmon/Makefile @@ -159,6 +159,7 @@ obj-$(CONFIG_SENSORS_S3C) += s3c-hwmon.o obj-$(CONFIG_SENSORS_SCH56XX_COMMON)+= sch56xx-common.o obj-$(CONFIG_SENSORS_SCH5627) += sch5627.o obj-$(CONFIG_SENSORS_SCH5636) += sch5636.o +obj-$(CONFIG_SENSORS_SL28CPLD) += sl28cpld-hwmon.o obj-$(CONFIG_SENSORS_SHT15) += sht15.o obj-$(CONFIG_SENSORS_SHT21) += sht21.o obj-$(CONFIG_SENSORS_SHT3x) += sht3x.o diff --git a/drivers/hwmon/sl28cpld-hwmon.c b/drivers/hwmon/sl28cpld-hwmon.c new file mode 100644 index 000000000000..e48f58ec5b9c --- /dev/null +++ b/drivers/hwmon/sl28cpld-hwmon.c @@ -0,0 +1,142 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * sl28cpld hardware monitoring driver + * + * Copyright 2020 Kontron Europe GmbH + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +#define FAN_INPUT 0x00 +#define FAN_SCALE_X8 BIT(7) +#define FAN_VALUE_MASK GENMASK(6, 0) + +struct sl28cpld_hwmon { + struct regmap *regmap; + u32 offset; +}; + +static umode_t sl28cpld_hwmon_is_visible(const void *data, + enum hwmon_sensor_types type, + u32 attr, int channel) +{ + return 0444; +} + +static int sl28cpld_hwmon_read(struct device *dev, + enum hwmon_sensor_types type, u32 attr, + int channel, long *input) +{ + struct sl28cpld_hwmon *hwmon = dev_get_drvdata(dev); + unsigned int value; + int ret; + + switch (attr) { + case hwmon_fan_input: + ret = regmap_read(hwmon->regmap, hwmon->offset + FAN_INPUT, + &value); + if (ret) + return ret; + /* + * The register has a 7 bit value and 1 bit which indicates the + * scale. If the MSB is set, then the lower 7 bit has to be + * multiplied by 8, to get the correct reading. + */ + if (value & FAN_SCALE_X8) + value = FIELD_GET(FAN_VALUE_MASK, value) << 3; + + /* + * The counter period is 1000ms and the sysfs specification + * says we should asssume 2 pulses per revolution. + */ + value *= 60 / 2; + + break; + default: + return -EOPNOTSUPP; + } + + *input = value; + return 0; +} + +static const u32 sl28cpld_hwmon_fan_config[] = { + HWMON_F_INPUT, + 0 +}; + +static const struct hwmon_channel_info sl28cpld_hwmon_fan = { + .type = hwmon_fan, + .config = sl28cpld_hwmon_fan_config, +}; + +static const struct hwmon_channel_info *sl28cpld_hwmon_info[] = { + &sl28cpld_hwmon_fan, + NULL +}; + +static const struct hwmon_ops sl28cpld_hwmon_ops = { + .is_visible = sl28cpld_hwmon_is_visible, + .read = sl28cpld_hwmon_read, +}; + +static const struct hwmon_chip_info sl28cpld_hwmon_chip_info = { + .ops = &sl28cpld_hwmon_ops, + .info = sl28cpld_hwmon_info, +}; + +static int sl28cpld_hwmon_probe(struct platform_device *pdev) +{ + struct sl28cpld_hwmon *hwmon; + struct device *hwmon_dev; + int ret; + + if (!pdev->dev.parent) + return -ENODEV; + + hwmon = devm_kzalloc(&pdev->dev, sizeof(*hwmon), GFP_KERNEL); + if (!hwmon) + return -ENOMEM; + + hwmon->regmap = dev_get_regmap(pdev->dev.parent, NULL); + if (!hwmon->regmap) + return -ENODEV; + + ret = device_property_read_u32(&pdev->dev, "reg", &hwmon->offset); + if (ret) + return -EINVAL; + + hwmon_dev = devm_hwmon_device_register_with_info(&pdev->dev, + "sl28cpld_hwmon", hwmon, + &sl28cpld_hwmon_chip_info, NULL); + if (IS_ERR(hwmon_dev)) + dev_err(&pdev->dev, "failed to register as hwmon device"); + + return PTR_ERR_OR_ZERO(hwmon_dev); +} + +static const struct of_device_id sl28cpld_hwmon_of_match[] = { + { .compatible = "kontron,sl28cpld-fan" }, + {} +}; +MODULE_DEVICE_TABLE(of, sl28cpld_hwmon_of_match); + +static struct platform_driver sl28cpld_hwmon_driver = { + .probe = sl28cpld_hwmon_probe, + .driver = { + .name = "sl28cpld-fan", + .of_match_table = sl28cpld_hwmon_of_match, + }, +}; +module_platform_driver(sl28cpld_hwmon_driver); + +MODULE_DESCRIPTION("sl28cpld Hardware Monitoring Driver"); +MODULE_AUTHOR("Michael Walle "); +MODULE_LICENSE("GPL"); From patchwork Thu Aug 13 12:48:28 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Michael Walle X-Patchwork-Id: 11712509 Return-Path: Received: from mail.kernel.org (pdx-korg-mail-1.web.codeaurora.org [172.30.200.123]) by pdx-korg-patchwork-2.web.codeaurora.org (Postfix) with ESMTP id C5C5B138C for ; Thu, 13 Aug 2020 12:51:50 +0000 (UTC) Received: from merlin.infradead.org (merlin.infradead.org [205.233.59.134]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by mail.kernel.org (Postfix) with ESMTPS id 9BB9320791 for ; Thu, 13 Aug 2020 12:51:50 +0000 (UTC) Authentication-Results: mail.kernel.org; dkim=pass (2048-bit key) header.d=lists.infradead.org header.i=@lists.infradead.org header.b="1Z7xvj/2"; dkim=fail reason="signature verification failed" (1024-bit key) header.d=walle.cc header.i=@walle.cc header.b="osDYlma2" DMARC-Filter: OpenDMARC Filter v1.3.2 mail.kernel.org 9BB9320791 Authentication-Results: mail.kernel.org; dmarc=none (p=none dis=none) header.from=walle.cc Authentication-Results: mail.kernel.org; spf=none smtp.mailfrom=linux-arm-kernel-bounces+patchwork-linux-arm=patchwork.kernel.org@lists.infradead.org DKIM-Signature: v=1; a=rsa-sha256; q=dns/txt; c=relaxed/relaxed; d=lists.infradead.org; s=merlin.20170209; h=Sender:Content-Transfer-Encoding: Content-Type:Cc:List-Subscribe:List-Help:List-Post:List-Archive: List-Unsubscribe:List-Id:MIME-Version:References:In-Reply-To:Message-Id:Date: Subject:To:From:Reply-To:Content-ID:Content-Description:Resent-Date: Resent-From:Resent-Sender:Resent-To:Resent-Cc:Resent-Message-ID:List-Owner; bh=QaMjA6cU5gwJ4fLjoHfmCXzCe78sC9lJT/1foqb+VGk=; b=1Z7xvj/26i6JtJSGu7jl+YCft zE50WSTfAoODWB97FLtEdvRq+POO7GwMfrCHEXSeTTe3u/YHzpz27Zxipo8l8HHxzTRXSRhdvhEna lH9QRWMbXY5Te/yoOS7eg6keoeUK3xt9hEexU+cnv9kyLUOWwj4tno3sitnDENYe6E7FOehGl+J+k w7Os0IbKhPn6LrQF4HkRj39z+BdI1d8zTFvw+wCCYkDaSFFtndKW89LEpEE2011SKd9ZTfjMCp5eh nU5ZkhepCjzv6Lf6wMuh3JopWMtFENjeKFXGOxy67wJJ/TE1exf05XVWWOYftZfllaYvAonRIUMZ6 x5xLkKEqA==; Received: from localhost ([::1] helo=merlin.infradead.org) by merlin.infradead.org with esmtp (Exim 4.92.3 #3 (Red Hat Linux)) id 1k6Cg5-0004mX-BO; Thu, 13 Aug 2020 12:49:53 +0000 Received: from ssl.serverraum.org ([176.9.125.105]) by merlin.infradead.org with esmtps (Exim 4.92.3 #3 (Red Hat Linux)) id 1k6CfC-0004RL-P3 for linux-arm-kernel@lists.infradead.org; Thu, 13 Aug 2020 12:49:06 +0000 Received: from mwalle01.sab.local. (unknown [213.135.10.150]) (using TLSv1.3 with cipher TLS_AES_256_GCM_SHA384 (256/256 bits) key-exchange ECDHE (P-384) server-signature RSA-PSS (2048 bits) server-digest SHA256) (No client certificate requested) by ssl.serverraum.org (Postfix) with ESMTPSA id 77C8B23E4A; Thu, 13 Aug 2020 14:48:55 +0200 (CEST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=walle.cc; s=mail2016061301; t=1597322935; h=from:from:reply-to:subject:subject:date:date:message-id:message-id: to:to:cc:cc:mime-version:mime-version: content-transfer-encoding:content-transfer-encoding: in-reply-to:in-reply-to:references:references; bh=vMi+RtpPjwmerV7+3qzoqMeDfgHSefflf9g/rpFl8iY=; b=osDYlma2XSyAdwMchHlAZpWdcQPYBpAo2IV5Gr7CdKVDXWEE7Vj4+xsSSiyBp8jwyWcJ8u CsQTXSAFCo0ZM9FVogGtbAcQFqA3+H1+ssCz6a+ggny3l2Wq/HlRyfrx6nmZpUeiHM+6d3 obL73Yaa8CSTKGhALjrXncZpl/lmPXU= From: Michael Walle To: linux-gpio@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-hwmon@vger.kernel.org, linux-pwm@vger.kernel.org, linux-watchdog@vger.kernel.org, linux-arm-kernel@lists.infradead.org Subject: [PATCH v8 09/13] arm64: dts: freescale: sl28: enable sl28cpld Date: Thu, 13 Aug 2020 14:48:28 +0200 Message-Id: <20200813124832.17349-10-michael@walle.cc> X-Mailer: git-send-email 2.20.1 In-Reply-To: <20200813124832.17349-1-michael@walle.cc> References: <20200813124832.17349-1-michael@walle.cc> MIME-Version: 1.0 X-Spam: Yes X-CRM114-Version: 20100106-BlameMichelson ( TRE 0.8.0 (BSD) ) MR-646709E3 X-CRM114-CacheID: sfid-20200813_084859_131545_FEDDBBDB X-CRM114-Status: GOOD ( 13.56 ) X-Spam-Score: -2.5 (--) X-Spam-Report: SpamAssassin version 3.4.4 on merlin.infradead.org summary: Content analysis details: (-2.5 points) pts rule name description ---- ---------------------- -------------------------------------------------- -2.3 RCVD_IN_DNSWL_MED RBL: Sender listed at https://www.dnswl.org/, medium trust [176.9.125.105 listed in list.dnswl.org] 0.0 SPF_HELO_NONE SPF: HELO does not publish an SPF Record -0.0 SPF_PASS SPF: sender matches SPF record -0.1 DKIM_VALID_AU Message has a valid DKIM or DK signature from author's domain 0.1 DKIM_SIGNED Message has a DKIM or DK signature, not necessarily valid -0.1 DKIM_VALID Message has at least one valid DKIM or DK signature -0.1 DKIM_VALID_EF Message has a valid DKIM or DK signature from envelope-from domain X-BeenThere: linux-arm-kernel@lists.infradead.org X-Mailman-Version: 2.1.29 Precedence: list List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Cc: Marc Zyngier , Jean Delvare , Catalin Marinas , Jason Cooper , Will Deacon , Greg Kroah-Hartman , Shawn Guo , Linus Walleij , Andy Shevchenko , Li Yang , Bartosz Golaszewski , Michael Walle , Rob Herring , Thierry Reding , Mark Brown , Pavel Machek , =?utf-8?q?Uwe_Kleine-K=C3=B6nig?= , Thomas Gleixner , Wim Van Sebroeck , Lee Jones , Guenter Roeck Sender: "linux-arm-kernel" Errors-To: linux-arm-kernel-bounces+patchwork-linux-arm=patchwork.kernel.org@lists.infradead.org Add the board management controller node. Signed-off-by: Michael Walle --- Changes since v7: - none Changes since v6: - renamed "sl28cpld-r1" to "sl28cpld" - moved "reg" and "compatible" properties to the top of a node Changes since v5: - none Changes since v4: - none Changes since v3: - see cover letter .../freescale/fsl-ls1028a-kontron-sl28.dts | 102 ++++++++++++++++++ 1 file changed, 102 insertions(+) diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28.dts index 360b3a168c10..9f9834eafe65 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28.dts @@ -8,6 +8,7 @@ /dts-v1/; #include "fsl-ls1028a.dtsi" +#include / { model = "Kontron SMARC-sAL28"; @@ -170,6 +171,107 @@ reg = <0x32>; }; + sl28cpld@4a { + compatible = "kontron,sl28cpld"; + reg = <0x4a>; + #address-cells = <1>; + #size-cells = <0>; + + watchdog@4 { + compatible = "kontron,sl28cpld-wdt"; + reg = <0x4>; + kontron,assert-wdt-timeout-pin; + }; + + hwmon@b { + compatible = "kontron,sl28cpld-fan"; + reg = <0xb>; + }; + + sl28cpld_pwm0: pwm@c { + compatible = "kontron,sl28cpld-pwm"; + reg = <0xc>; + #pwm-cells = <2>; + }; + + sl28cpld_pwm1: pwm@e { + compatible = "kontron,sl28cpld-pwm"; + reg = <0xe>; + #pwm-cells = <2>; + }; + + sl28cpld_gpio0: gpio@10 { + compatible = "kontron,sl28cpld-gpio"; + reg = <0x10>; + interrupts-extended = <&gpio2 6 + IRQ_TYPE_EDGE_FALLING>; + + gpio-controller; + #gpio-cells = <2>; + gpio-line-names = + "GPIO0_CAM0_PWR_N", "GPIO1_CAM1_PWR_N", + "GPIO2_CAM0_RST_N", "GPIO3_CAM1_RST_N", + "GPIO4_HDA_RST_N", "GPIO5_PWM_OUT", + "GPIO6_TACHIN", "GPIO7"; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + sl28cpld_gpio1: gpio@15 { + compatible = "kontron,sl28cpld-gpio"; + reg = <0x15>; + interrupts-extended = <&gpio2 6 + IRQ_TYPE_EDGE_FALLING>; + + gpio-controller; + #gpio-cells = <2>; + gpio-line-names = + "GPIO8", "GPIO9", "GPIO10", "GPIO11", + "", "", "", ""; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + sl28cpld_gpio2: gpio@1a { + compatible = "kontron,sl28cpld-gpo"; + reg = <0x1a>; + + gpio-controller; + #gpio-cells = <2>; + gpio-line-names = + "LCD0 voltage enable", + "LCD0 backlight enable", + "eMMC reset", "LVDS bridge reset", + "LVDS bridge power-down", + "SDIO power enable", + "", ""; + }; + + sl28cpld_gpio3: gpio@1b { + compatible = "kontron,sl28cpld-gpi"; + reg = <0x1b>; + + gpio-controller; + #gpio-cells = <2>; + gpio-line-names = + "Power button", "Force recovery", "Sleep", + "Battery low", "Lid state", "Charging", + "Charger present", ""; + }; + + sl28cpld_intc: interrupt-controller@1c { + compatible = "kontron,sl28cpld-intc"; + reg = <0x1c>; + interrupts-extended = <&gpio2 6 + IRQ_TYPE_EDGE_FALLING>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + eeprom@50 { compatible = "atmel,24c32"; reg = <0x50>; From patchwork Thu Aug 13 12:48:29 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Michael Walle X-Patchwork-Id: 11712453 Return-Path: Received: from mail.kernel.org (pdx-korg-mail-1.web.codeaurora.org [172.30.200.123]) by pdx-korg-patchwork-2.web.codeaurora.org (Postfix) with ESMTP id A5B49138C for ; Thu, 13 Aug 2020 12:49:42 +0000 (UTC) Received: from merlin.infradead.org (merlin.infradead.org [205.233.59.134]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by mail.kernel.org (Postfix) with ESMTPS id 7EA9220829 for ; Thu, 13 Aug 2020 12:49:42 +0000 (UTC) Authentication-Results: mail.kernel.org; dkim=pass (2048-bit key) header.d=lists.infradead.org header.i=@lists.infradead.org header.b="zYSQIF0Y"; dkim=fail reason="signature verification failed" (1024-bit key) header.d=walle.cc header.i=@walle.cc header.b="IOwaJzaV" DMARC-Filter: OpenDMARC Filter v1.3.2 mail.kernel.org 7EA9220829 Authentication-Results: mail.kernel.org; dmarc=none (p=none dis=none) header.from=walle.cc Authentication-Results: mail.kernel.org; spf=none smtp.mailfrom=linux-arm-kernel-bounces+patchwork-linux-arm=patchwork.kernel.org@lists.infradead.org DKIM-Signature: v=1; a=rsa-sha256; q=dns/txt; c=relaxed/relaxed; d=lists.infradead.org; s=merlin.20170209; h=Sender:Content-Transfer-Encoding: Content-Type:Cc:List-Subscribe:List-Help:List-Post:List-Archive: List-Unsubscribe:List-Id:MIME-Version:References:In-Reply-To:Message-Id:Date: Subject:To:From:Reply-To:Content-ID:Content-Description:Resent-Date: Resent-From:Resent-Sender:Resent-To:Resent-Cc:Resent-Message-ID:List-Owner; bh=EBJreI8/dfk8C1pT4Hyxqytdna7DtBBzNeOpWztYn5g=; b=zYSQIF0Y+aQiQguXoWSyA17fY ryumpYFAkszJ0waOf9WnWpzfeoqEIjJTPh0CZVztmn1h2L8UdF9+Od5bMAKTl+LNVWQZKvwrR+uFy KeOwfcl/ds3YBmWtSZLr0KeEsJLYS6OGgRwHTl6D+qY7SedR9J8nVeTyiX0TKTLZjG4MDU3XnLgyL UeUxzX+9ZK7tJMEnPFFSG5sSLQLXBBm1hR/cCzq91sKWidyG9ozs5RcuL8gvmIl32xoSDNhkT3WWH ZDBHW5oyr0gqOf4FXiimLuHmb63bCv3qb/UaAFUqewANQkcZd/QyaVEFQ/yqWtwNMhAR9aWViLHp1 oq4I1l8iQ==; Received: from localhost ([::1] helo=merlin.infradead.org) by merlin.infradead.org with esmtp (Exim 4.92.3 #3 (Red Hat Linux)) id 1k6Cfj-0004bW-JG; Thu, 13 Aug 2020 12:49:31 +0000 Received: from ssl.serverraum.org ([176.9.125.105]) by merlin.infradead.org with esmtps (Exim 4.92.3 #3 (Red Hat Linux)) id 1k6CfC-0004RK-P0 for linux-arm-kernel@lists.infradead.org; Thu, 13 Aug 2020 12:49:02 +0000 Received: from mwalle01.sab.local. (unknown [213.135.10.150]) (using TLSv1.3 with cipher TLS_AES_256_GCM_SHA384 (256/256 bits) key-exchange ECDHE (P-384) server-signature RSA-PSS (2048 bits) server-digest SHA256) (No client certificate requested) by ssl.serverraum.org (Postfix) with ESMTPSA id 06D5323E4B; Thu, 13 Aug 2020 14:48:56 +0200 (CEST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=walle.cc; s=mail2016061301; t=1597322936; h=from:from:reply-to:subject:subject:date:date:message-id:message-id: to:to:cc:cc:mime-version:mime-version: content-transfer-encoding:content-transfer-encoding: in-reply-to:in-reply-to:references:references; bh=hJf34evx9FQWPoR+qhJnp9FtLdiEH7zmv8IuOtb0AHw=; b=IOwaJzaV6ZFWTsZz56Q3en2yzOesPCQhYCizO2KOVttXGuezfoywfLvvJ9XvR0iCfzqEVZ 11gXlX059qLhpBWKAFHw1RQmT+HfwUn4Wxjrsom+nN/gdvD+aEVNo2ItfRc+TBfh8S4ey8 c/Jh3a7zH0TMKfmRLLBzMLI6Sgj0ezc= From: Michael Walle To: linux-gpio@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-hwmon@vger.kernel.org, linux-pwm@vger.kernel.org, linux-watchdog@vger.kernel.org, linux-arm-kernel@lists.infradead.org Subject: [PATCH v8 10/13] arm64: dts: freescale: sl28: map GPIOs to input events Date: Thu, 13 Aug 2020 14:48:29 +0200 Message-Id: <20200813124832.17349-11-michael@walle.cc> X-Mailer: git-send-email 2.20.1 In-Reply-To: <20200813124832.17349-1-michael@walle.cc> References: <20200813124832.17349-1-michael@walle.cc> MIME-Version: 1.0 X-Spam: Yes X-CRM114-Version: 20100106-BlameMichelson ( TRE 0.8.0 (BSD) ) MR-646709E3 X-CRM114-CacheID: sfid-20200813_084858_975473_13D89468 X-CRM114-Status: GOOD ( 14.79 ) X-Spam-Score: -2.5 (--) X-Spam-Report: SpamAssassin version 3.4.4 on merlin.infradead.org summary: Content analysis details: (-2.5 points) pts rule name description ---- ---------------------- -------------------------------------------------- -2.3 RCVD_IN_DNSWL_MED RBL: Sender listed at https://www.dnswl.org/, medium trust [176.9.125.105 listed in list.dnswl.org] 0.0 SPF_HELO_NONE SPF: HELO does not publish an SPF Record -0.0 SPF_PASS SPF: sender matches SPF record -0.1 DKIM_VALID_AU Message has a valid DKIM or DK signature from author's domain 0.1 DKIM_SIGNED Message has a DKIM or DK signature, not necessarily valid -0.1 DKIM_VALID Message has at least one valid DKIM or DK signature -0.1 DKIM_VALID_EF Message has a valid DKIM or DK signature from envelope-from domain X-BeenThere: linux-arm-kernel@lists.infradead.org X-Mailman-Version: 2.1.29 Precedence: list List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Cc: Marc Zyngier , Jean Delvare , Catalin Marinas , Jason Cooper , Will Deacon , Greg Kroah-Hartman , Shawn Guo , Linus Walleij , Andy Shevchenko , Li Yang , Bartosz Golaszewski , Michael Walle , Rob Herring , Thierry Reding , Mark Brown , Pavel Machek , =?utf-8?q?Uwe_Kleine-K=C3=B6nig?= , Thomas Gleixner , Wim Van Sebroeck , Lee Jones , Guenter Roeck Sender: "linux-arm-kernel" Errors-To: linux-arm-kernel-bounces+patchwork-linux-arm=patchwork.kernel.org@lists.infradead.org Now that we have support for GPIO lines of the SMARC connector, map the sleep, power and lid switch signals to the corresponding keys using the gpio-keys and gpio-keys-polled drivers. The power and sleep signals have dedicated interrupts, thus we use these ones. The lid switch is just mapped to a GPIO input and needs polling. Signed-off-by: Michael Walle --- Changes since v7: - none Changes since v6: - none Changes since v5: - none Changes since v4: - none Changes since v3: - see cover letter .../freescale/fsl-ls1028a-kontron-sl28.dts | 32 +++++++++++++++++++ 1 file changed, 32 insertions(+) diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28.dts index 9f9834eafe65..17a2f5dacc3f 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28.dts @@ -9,6 +9,8 @@ /dts-v1/; #include "fsl-ls1028a.dtsi" #include +#include +#include / { model = "Kontron SMARC-sAL28"; @@ -23,6 +25,36 @@ spi1 = &dspi2; }; + buttons0 { + compatible = "gpio-keys"; + + power-button { + interrupts-extended = <&sl28cpld_intc + 4 IRQ_TYPE_EDGE_BOTH>; + linux,code = ; + label = "Power"; + }; + + sleep-button { + interrupts-extended = <&sl28cpld_intc + 5 IRQ_TYPE_EDGE_BOTH>; + linux,code = ; + label = "Sleep"; + }; + }; + + buttons1 { + compatible = "gpio-keys-polled"; + poll-interval = <200>; + + lid-switch { + linux,input-type = ; + linux,code = ; + gpios = <&sl28cpld_gpio3 4 GPIO_ACTIVE_LOW>; + label = "Lid"; + }; + }; + chosen { stdout-path = "serial0:115200n8"; }; From patchwork Thu Aug 13 12:48:30 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Michael Walle X-Patchwork-Id: 11712507 Return-Path: Received: from mail.kernel.org (pdx-korg-mail-1.web.codeaurora.org [172.30.200.123]) by pdx-korg-patchwork-2.web.codeaurora.org (Postfix) with ESMTP id E25B7109B for ; Thu, 13 Aug 2020 12:51:46 +0000 (UTC) Received: from merlin.infradead.org (merlin.infradead.org [205.233.59.134]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by mail.kernel.org (Postfix) with ESMTPS id BBB6D20791 for ; Thu, 13 Aug 2020 12:51:46 +0000 (UTC) Authentication-Results: mail.kernel.org; dkim=pass (2048-bit key) header.d=lists.infradead.org header.i=@lists.infradead.org header.b="xNMCOoze"; dkim=fail reason="signature verification failed" (1024-bit key) header.d=walle.cc header.i=@walle.cc header.b="PcwPtAe8" DMARC-Filter: OpenDMARC Filter v1.3.2 mail.kernel.org BBB6D20791 Authentication-Results: mail.kernel.org; dmarc=none (p=none dis=none) header.from=walle.cc Authentication-Results: mail.kernel.org; spf=none smtp.mailfrom=linux-arm-kernel-bounces+patchwork-linux-arm=patchwork.kernel.org@lists.infradead.org DKIM-Signature: v=1; a=rsa-sha256; q=dns/txt; c=relaxed/relaxed; d=lists.infradead.org; s=merlin.20170209; h=Sender:Content-Transfer-Encoding: Content-Type:Cc:List-Subscribe:List-Help:List-Post:List-Archive: List-Unsubscribe:List-Id:MIME-Version:References:In-Reply-To:Message-Id:Date: Subject:To:From:Reply-To:Content-ID:Content-Description:Resent-Date: Resent-From:Resent-Sender:Resent-To:Resent-Cc:Resent-Message-ID:List-Owner; bh=kLdzxk1zud4wRm9X6xI+LOYFooM4VVcM/q7p0v+LoP8=; b=xNMCOozeufwj+gn7OnrmOyWwk DUSSF8suMVWsEftJD+wVF4J6/Hq+bYOvgoJ+CbEfJfFA51ZeFELVKRAL+s99/IBURwV+DHzVV4rU0 zbsG9pNtC77/5ZubgzLje63L3z/R8rZakES6LdplAuE1k2Xr2P3GteIX8ADUgDDnzdVD0o/5rpRy0 AnSCV8WfNXHdn0TeFYCDpKsfsO1m1B2fnCfApEUaHZ/wTcGPJDn/XbEC3f8pGBRujwrUTHMofBcVv ng4ttdK61896NBtREldclhu8P4WgYLt4yjgXHMhVcguN4VP+mNzBkZx94zLnoX7GgTDOftD7Okdwj eCAtxdmVg==; Received: from localhost ([::1] helo=merlin.infradead.org) by merlin.infradead.org with esmtp (Exim 4.92.3 #3 (Red Hat Linux)) id 1k6Cfv-0004hA-T3; Thu, 13 Aug 2020 12:49:43 +0000 Received: from ssl.serverraum.org ([176.9.125.105]) by merlin.infradead.org with esmtps (Exim 4.92.3 #3 (Red Hat Linux)) id 1k6CfF-0004SA-6E for linux-arm-kernel@lists.infradead.org; Thu, 13 Aug 2020 12:49:05 +0000 Received: from mwalle01.sab.local. (unknown [213.135.10.150]) (using TLSv1.3 with cipher TLS_AES_256_GCM_SHA384 (256/256 bits) key-exchange ECDHE (P-384) server-signature RSA-PSS (2048 bits) server-digest SHA256) (No client certificate requested) by ssl.serverraum.org (Postfix) with ESMTPSA id 6C73623E4D; Thu, 13 Aug 2020 14:48:56 +0200 (CEST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=walle.cc; s=mail2016061301; t=1597322936; h=from:from:reply-to:subject:subject:date:date:message-id:message-id: to:to:cc:cc:mime-version:mime-version: content-transfer-encoding:content-transfer-encoding: in-reply-to:in-reply-to:references:references; bh=kUSNqf4fbfPjkB54pTr5T1ff03Hc79GXuyMcgsK+vRk=; b=PcwPtAe8KEdr8U+7Zc9qyEQGlEk7fZE0VdyXTxFCFg38da+nYo6i2NJ/+ZirAyA0E9vM8a LBnF17d491pMYn5CVvKYiP7U04dFrGyRE05wOaWn2/YSktEG275DneWYMCFM3RcfoCtxZI 6gbkAHZq2IPrQkabnsv/WlJu/GsNDgY= From: Michael Walle To: linux-gpio@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-hwmon@vger.kernel.org, linux-pwm@vger.kernel.org, linux-watchdog@vger.kernel.org, linux-arm-kernel@lists.infradead.org Subject: [PATCH v8 11/13] arm64: dts: freescale: sl28: enable LED support Date: Thu, 13 Aug 2020 14:48:30 +0200 Message-Id: <20200813124832.17349-12-michael@walle.cc> X-Mailer: git-send-email 2.20.1 In-Reply-To: <20200813124832.17349-1-michael@walle.cc> References: <20200813124832.17349-1-michael@walle.cc> MIME-Version: 1.0 X-Spam: Yes X-CRM114-Version: 20100106-BlameMichelson ( TRE 0.8.0 (BSD) ) MR-646709E3 X-CRM114-CacheID: sfid-20200813_084901_415897_DA10EFE2 X-CRM114-Status: GOOD ( 16.37 ) X-Spam-Score: -2.5 (--) X-Spam-Report: SpamAssassin version 3.4.4 on merlin.infradead.org summary: Content analysis details: (-2.5 points) pts rule name description ---- ---------------------- -------------------------------------------------- -2.3 RCVD_IN_DNSWL_MED RBL: Sender listed at https://www.dnswl.org/, medium trust [176.9.125.105 listed in list.dnswl.org] 0.0 SPF_HELO_NONE SPF: HELO does not publish an SPF Record -0.0 SPF_PASS SPF: sender matches SPF record -0.1 DKIM_VALID_AU Message has a valid DKIM or DK signature from author's domain 0.1 DKIM_SIGNED Message has a DKIM or DK signature, not necessarily valid -0.1 DKIM_VALID Message has at least one valid DKIM or DK signature -0.1 DKIM_VALID_EF Message has a valid DKIM or DK signature from envelope-from domain X-BeenThere: linux-arm-kernel@lists.infradead.org X-Mailman-Version: 2.1.29 Precedence: list List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Cc: Marc Zyngier , Jean Delvare , Catalin Marinas , Jason Cooper , Will Deacon , Greg Kroah-Hartman , Shawn Guo , Linus Walleij , Andy Shevchenko , Li Yang , Bartosz Golaszewski , Michael Walle , Rob Herring , Thierry Reding , Mark Brown , Pavel Machek , =?utf-8?q?Uwe_Kleine-K=C3=B6nig?= , Thomas Gleixner , Wim Van Sebroeck , Lee Jones , Guenter Roeck Sender: "linux-arm-kernel" Errors-To: linux-arm-kernel-bounces+patchwork-linux-arm=patchwork.kernel.org@lists.infradead.org Now that we have support for GPIO lines of the SMARC connector, enable LED support on the KBox A-230-LS. There are two LEDs without fixed functions, one is yellow and one is green. Unfortunately, it is just one multi-color LED, thus while it is possible to enable both at the same time it is hard to tell the difference between "yellow only" and "yellow and green". Signed-off-by: Michael Walle --- Changes since v7: - use new "function" and "color" properties instead of a label - added default-on trigger for the power-led Changes since v6: - none Changes since v5: - changed the label, suggested by Pavel Machek Changes since v4: - none Changes since v3: - see cover letter .../fsl-ls1028a-kontron-kbox-a-230-ls.dts | 18 ++++++++++++++++++ 1 file changed, 18 insertions(+) diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-kbox-a-230-ls.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-kbox-a-230-ls.dts index 4b4cc6a1573d..dd516c0efd8b 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-kbox-a-230-ls.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-kbox-a-230-ls.dts @@ -11,11 +11,29 @@ /dts-v1/; #include "fsl-ls1028a-kontron-sl28-var4.dts" +#include / { model = "Kontron KBox A-230-LS"; compatible = "kontron,kbox-a-230-ls", "kontron,sl28-var4", "kontron,sl28", "fsl,ls1028a"; + + leds { + compatible = "gpio-leds"; + + alarm-led { + function = LED_FUNCTION_ALARM; + color = ; + gpios = <&sl28cpld_gpio0 0 0>; + }; + + power-led { + linux,default-trigger = "default-on"; + function = LED_FUNCTION_POWER; + color = ; + gpios = <&sl28cpld_gpio1 3 0>; + }; + }; }; &enetc_mdio_pf3 { From patchwork Thu Aug 13 12:48:31 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Michael Walle X-Patchwork-Id: 11712475 Return-Path: Received: from mail.kernel.org (pdx-korg-mail-1.web.codeaurora.org [172.30.200.123]) by pdx-korg-patchwork-2.web.codeaurora.org (Postfix) with ESMTP id DA87B138C for ; Thu, 13 Aug 2020 12:50:04 +0000 (UTC) Received: from merlin.infradead.org (merlin.infradead.org [205.233.59.134]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by mail.kernel.org (Postfix) with ESMTPS id B1C1520855 for ; Thu, 13 Aug 2020 12:50:04 +0000 (UTC) Authentication-Results: mail.kernel.org; dkim=pass (2048-bit key) header.d=lists.infradead.org header.i=@lists.infradead.org header.b="IDwD5fQQ"; dkim=fail reason="signature verification failed" (1024-bit key) header.d=walle.cc header.i=@walle.cc header.b="acsJDnf1" DMARC-Filter: OpenDMARC Filter v1.3.2 mail.kernel.org B1C1520855 Authentication-Results: mail.kernel.org; dmarc=none (p=none dis=none) header.from=walle.cc Authentication-Results: mail.kernel.org; spf=none smtp.mailfrom=linux-arm-kernel-bounces+patchwork-linux-arm=patchwork.kernel.org@lists.infradead.org DKIM-Signature: v=1; a=rsa-sha256; q=dns/txt; c=relaxed/relaxed; d=lists.infradead.org; s=merlin.20170209; h=Sender:Content-Transfer-Encoding: Content-Type:Cc:List-Subscribe:List-Help:List-Post:List-Archive: List-Unsubscribe:List-Id:MIME-Version:References:In-Reply-To:Message-Id:Date: Subject:To:From:Reply-To:Content-ID:Content-Description:Resent-Date: Resent-From:Resent-Sender:Resent-To:Resent-Cc:Resent-Message-ID:List-Owner; bh=IvLtzlNoi/AtVKjnBLYVa0bAzKxtzGjmcFurmKFud6A=; b=IDwD5fQQwyoRkjKMhihjL8ff1 /S+a+legYPGOC1ZRXyll1368xvTQU4sRbhkIYMWwBfXRIPwT5Oli2NVR/PwES3hD5lGfwQAs2bLxq WIbwP/ZTBgECndGpPM3yxYP+2V5EceQW5hiGL9wjpNr3Hpi6UAsY0Z+w3hx88VnGT/rSPOnL441J4 16HoiplR7y9j5MBRaD3uq0qfTpi1xClcXIWL/JZzupXQBOV3tl5/EkcT0DMcZR+TKOoZVjoRiq7Gn TyRbCajsr4VM2F4DF1MG0KG8Wv/zq3XYDvxFKI0KTYK5PIVb4mLIW3ALPzjzABdA/WW/aqUP5kbYD D14H5y4Og==; Received: from localhost ([::1] helo=merlin.infradead.org) by merlin.infradead.org with esmtp (Exim 4.92.3 #3 (Red Hat Linux)) id 1k6Cfy-0004ib-Vn; Thu, 13 Aug 2020 12:49:47 +0000 Received: from ssl.serverraum.org ([2a01:4f8:151:8464::1:2]) by merlin.infradead.org with esmtps (Exim 4.92.3 #3 (Red Hat Linux)) id 1k6CfF-0004SB-7Q for linux-arm-kernel@lists.infradead.org; Thu, 13 Aug 2020 12:49:06 +0000 Received: from mwalle01.sab.local. (unknown [213.135.10.150]) (using TLSv1.3 with cipher TLS_AES_256_GCM_SHA384 (256/256 bits) key-exchange ECDHE (P-384) server-signature RSA-PSS (2048 bits) server-digest SHA256) (No client certificate requested) by ssl.serverraum.org (Postfix) with ESMTPSA id D79CB23E4E; Thu, 13 Aug 2020 14:48:56 +0200 (CEST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=walle.cc; s=mail2016061301; t=1597322937; h=from:from:reply-to:subject:subject:date:date:message-id:message-id: to:to:cc:cc:mime-version:mime-version: content-transfer-encoding:content-transfer-encoding: in-reply-to:in-reply-to:references:references; bh=scfh2Kvik6gQvEIpEm2pPDYNo2I8IIi2eKTQ88yDCYc=; b=acsJDnf1WLPsKCuWArwtXeP8tGWXq69pN6VC9yOe/oRZppSxu58JprPqFLffx1HgzfR3M6 iTFLVmgT0zOxeSw5fOAUyu8Lm8Y8GSPVvu/rYmTPB5OjLlvtq21LU3Ui9ATAag9Jw8YCm1 zYn9bpPiTI+69wPmq1mADkvfWvX7TtM= From: Michael Walle To: linux-gpio@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-hwmon@vger.kernel.org, linux-pwm@vger.kernel.org, linux-watchdog@vger.kernel.org, linux-arm-kernel@lists.infradead.org Subject: [PATCH v8 12/13] arm64: dts: freescale: sl28: enable fan support Date: Thu, 13 Aug 2020 14:48:31 +0200 Message-Id: <20200813124832.17349-13-michael@walle.cc> X-Mailer: git-send-email 2.20.1 In-Reply-To: <20200813124832.17349-1-michael@walle.cc> References: <20200813124832.17349-1-michael@walle.cc> MIME-Version: 1.0 X-Spam: Yes X-CRM114-Version: 20100106-BlameMichelson ( TRE 0.8.0 (BSD) ) MR-646709E3 X-CRM114-CacheID: sfid-20200813_084901_488543_C32017C7 X-CRM114-Status: GOOD ( 14.57 ) X-Spam-Score: -2.5 (--) X-Spam-Report: SpamAssassin version 3.4.4 on merlin.infradead.org summary: Content analysis details: (-2.5 points) pts rule name description ---- ---------------------- -------------------------------------------------- -2.3 RCVD_IN_DNSWL_MED RBL: Sender listed at https://www.dnswl.org/, medium trust [2a01:4f8:151:8464:0:0:1:2 listed in] [list.dnswl.org] 0.0 SPF_HELO_NONE SPF: HELO does not publish an SPF Record -0.0 SPF_PASS SPF: sender matches SPF record -0.1 DKIM_VALID_AU Message has a valid DKIM or DK signature from author's domain 0.1 DKIM_SIGNED Message has a DKIM or DK signature, not necessarily valid -0.1 DKIM_VALID Message has at least one valid DKIM or DK signature -0.1 DKIM_VALID_EF Message has a valid DKIM or DK signature from envelope-from domain X-BeenThere: linux-arm-kernel@lists.infradead.org X-Mailman-Version: 2.1.29 Precedence: list List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Cc: Marc Zyngier , Jean Delvare , Catalin Marinas , Jason Cooper , Will Deacon , Greg Kroah-Hartman , Shawn Guo , Linus Walleij , Andy Shevchenko , Li Yang , Bartosz Golaszewski , Michael Walle , Rob Herring , Thierry Reding , Mark Brown , Pavel Machek , =?utf-8?q?Uwe_Kleine-K=C3=B6nig?= , Thomas Gleixner , Wim Van Sebroeck , Lee Jones , Guenter Roeck Sender: "linux-arm-kernel" Errors-To: linux-arm-kernel-bounces+patchwork-linux-arm=patchwork.kernel.org@lists.infradead.org Add a pwm-fan mapped to the PWM channel 0 which is connected to the fan connector of the carrier. Signed-off-by: Michael Walle --- Changes since v7: - none Changes since v6: - none Changes since v5: - none Changes since v4: - none Changes since v3: - see cover letter .../dts/freescale/fsl-ls1028a-kontron-sl28-var3-ads2.dts | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var3-ads2.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var3-ads2.dts index 0973a6a45217..c45d7b40e374 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var3-ads2.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var3-ads2.dts @@ -15,6 +15,15 @@ compatible = "kontron,sl28-var3-ads2", "kontron,sl28-var3", "kontron,sl28", "fsl,ls1028a"; + pwm-fan { + compatible = "pwm-fan"; + cooling-min-state = <0>; + cooling-max-state = <3>; + #cooling-cells = <2>; + pwms = <&sl28cpld_pwm0 0 4000000>; + cooling-levels = <1 128 192 255>; + }; + sound { #address-cells = <1>; #size-cells = <0>; From patchwork Thu Aug 13 12:48:32 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Michael Walle X-Patchwork-Id: 11712485 Return-Path: Received: from mail.kernel.org (pdx-korg-mail-1.web.codeaurora.org [172.30.200.123]) by pdx-korg-patchwork-2.web.codeaurora.org (Postfix) with ESMTP id 0538E138C for ; Thu, 13 Aug 2020 12:50:19 +0000 (UTC) Received: from merlin.infradead.org (merlin.infradead.org [205.233.59.134]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by mail.kernel.org (Postfix) with ESMTPS id C59F520791 for ; Thu, 13 Aug 2020 12:50:18 +0000 (UTC) Authentication-Results: mail.kernel.org; dkim=pass (2048-bit key) header.d=lists.infradead.org header.i=@lists.infradead.org header.b="n14Y2w/e"; dkim=fail reason="signature verification failed" (1024-bit key) header.d=walle.cc header.i=@walle.cc header.b="ZrfsBV5X" DMARC-Filter: OpenDMARC Filter v1.3.2 mail.kernel.org C59F520791 Authentication-Results: mail.kernel.org; dmarc=none (p=none dis=none) header.from=walle.cc Authentication-Results: mail.kernel.org; spf=none smtp.mailfrom=linux-arm-kernel-bounces+patchwork-linux-arm=patchwork.kernel.org@lists.infradead.org DKIM-Signature: v=1; a=rsa-sha256; q=dns/txt; c=relaxed/relaxed; d=lists.infradead.org; s=merlin.20170209; h=Sender:Content-Transfer-Encoding: Content-Type:Cc:List-Subscribe:List-Help:List-Post:List-Archive: List-Unsubscribe:List-Id:MIME-Version:References:In-Reply-To:Message-Id:Date: Subject:To:From:Reply-To:Content-ID:Content-Description:Resent-Date: Resent-From:Resent-Sender:Resent-To:Resent-Cc:Resent-Message-ID:List-Owner; bh=pIwisSY/QWLnhWqIePpa4CJp1W3zJaYizpbqMtB3f/k=; b=n14Y2w/e5EjbIYRfYyAcmRlh1 0TIOX3k92IgIHN/8ip+oOoOPP46XD9ZHnyrHo9sNt186pKuMO9Sl9r6WvbmKNRX5MTUTrDY7Eh9sA 80E5LvbpzyJ+JsOrEv/hwWVCn6xvGS5cM2VwHHV7MZ+0T8ddkKiF7F9zwuA9geK004JSJw53y2UNX mJomlXn/tw7wYvC3dhxLSJ/CUfgX0QSQFWBsN0qiBpyXM4cWRtuZuGwaF+b9UCXcYKx2gTES9RH89 CkhkkDlrKebfYBgLAt/ryM3edYKUyAELkx7ycP85OhGdBwYB0v/uaw89AYJs5KhNaTq7mktkE2KB+ 3daTckjIw==; Received: from localhost ([::1] helo=merlin.infradead.org) by merlin.infradead.org with esmtp (Exim 4.92.3 #3 (Red Hat Linux)) id 1k6Cg9-0004op-AS; Thu, 13 Aug 2020 12:49:57 +0000 Received: from ssl.serverraum.org ([176.9.125.105]) by merlin.infradead.org with esmtps (Exim 4.92.3 #3 (Red Hat Linux)) id 1k6CfF-0004SE-6E for linux-arm-kernel@lists.infradead.org; Thu, 13 Aug 2020 12:49:07 +0000 Received: from mwalle01.sab.local. (unknown [213.135.10.150]) (using TLSv1.3 with cipher TLS_AES_256_GCM_SHA384 (256/256 bits) key-exchange ECDHE (P-384) server-signature RSA-PSS (2048 bits) server-digest SHA256) (No client certificate requested) by ssl.serverraum.org (Postfix) with ESMTPSA id 6DD5A23E52; Thu, 13 Aug 2020 14:48:57 +0200 (CEST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=walle.cc; s=mail2016061301; t=1597322937; h=from:from:reply-to:subject:subject:date:date:message-id:message-id: to:to:cc:cc:mime-version:mime-version: content-transfer-encoding:content-transfer-encoding: in-reply-to:in-reply-to:references:references; bh=jzoYKZop+EzAsyWCwSg4207lyXayLCZfQtt4nzi0YQM=; b=ZrfsBV5XwVlGpJtWArjAeYmO9Cwe7PmXMacwTqM+0NpYjrd4gN5HoBVQ/h0pI1F9NU24r6 D3a0ZtoySmdPkc2aZzM8jXoKpTWi8O86MVL4GButea66XSlXeC1z0t0fvPM7v94nEfv7WH CIRuYDvqsKlzOMrK42+25UXRtXr+18E= From: Michael Walle To: linux-gpio@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-hwmon@vger.kernel.org, linux-pwm@vger.kernel.org, linux-watchdog@vger.kernel.org, linux-arm-kernel@lists.infradead.org Subject: [PATCH v8 13/13] arm64: defconfig: enable the sl28cpld board management controller Date: Thu, 13 Aug 2020 14:48:32 +0200 Message-Id: <20200813124832.17349-14-michael@walle.cc> X-Mailer: git-send-email 2.20.1 In-Reply-To: <20200813124832.17349-1-michael@walle.cc> References: <20200813124832.17349-1-michael@walle.cc> MIME-Version: 1.0 X-Spam: Yes X-CRM114-Version: 20100106-BlameMichelson ( TRE 0.8.0 (BSD) ) MR-646709E3 X-CRM114-CacheID: sfid-20200813_084901_498490_2A806C6F X-CRM114-Status: GOOD ( 13.95 ) X-Spam-Score: -1.7 (-) X-Spam-Report: SpamAssassin version 3.4.4 on merlin.infradead.org summary: Content analysis details: (-1.7 points) pts rule name description ---- ---------------------- -------------------------------------------------- -2.3 RCVD_IN_DNSWL_MED RBL: Sender listed at https://www.dnswl.org/, medium trust [176.9.125.105 listed in list.dnswl.org] 0.0 SPF_HELO_NONE SPF: HELO does not publish an SPF Record -0.0 SPF_PASS SPF: sender matches SPF record -0.1 DKIM_VALID_AU Message has a valid DKIM or DK signature from author's domain 0.1 DKIM_SIGNED Message has a DKIM or DK signature, not necessarily valid -0.1 DKIM_VALID Message has at least one valid DKIM or DK signature -0.1 DKIM_VALID_EF Message has a valid DKIM or DK signature from envelope-from domain 0.8 UPPERCASE_50_75 message body is 50-75% uppercase X-BeenThere: linux-arm-kernel@lists.infradead.org X-Mailman-Version: 2.1.29 Precedence: list List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Cc: Marc Zyngier , Jean Delvare , Catalin Marinas , Jason Cooper , Will Deacon , Greg Kroah-Hartman , Shawn Guo , Linus Walleij , Andy Shevchenko , Li Yang , Bartosz Golaszewski , Michael Walle , Rob Herring , Thierry Reding , Mark Brown , Pavel Machek , =?utf-8?q?Uwe_Kleine-K=C3=B6nig?= , Thomas Gleixner , Wim Van Sebroeck , Lee Jones , Guenter Roeck Sender: "linux-arm-kernel" Errors-To: linux-arm-kernel-bounces+patchwork-linux-arm=patchwork.kernel.org@lists.infradead.org Enable the kernel modules for the board management controller "sl28cpld" which is used on the SMARC-sAL28 board. Signed-off-by: Michael Walle --- Changes since v7: - added new virtual symbol CONFIG_MFD_SL28CPLD Changes since v6: - none Changes since v5: - new patch arch/arm64/configs/defconfig | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig index 500b782b92df..badfca74d656 100644 --- a/arch/arm64/configs/defconfig +++ b/arch/arm64/configs/defconfig @@ -500,6 +500,7 @@ CONFIG_GPIO_PCA953X=y CONFIG_GPIO_PCA953X_IRQ=y CONFIG_GPIO_BD9571MWV=m CONFIG_GPIO_MAX77620=y +CONFIG_GPIO_SL28CPLD=m CONFIG_POWER_AVS=y CONFIG_QCOM_CPR=y CONFIG_ROCKCHIP_IODOMAIN=y @@ -513,6 +514,7 @@ CONFIG_SENSORS_ARM_SCPI=y CONFIG_SENSORS_LM90=m CONFIG_SENSORS_PWM_FAN=m CONFIG_SENSORS_RASPBERRYPI_HWMON=m +CONFIG_SENSORS_SL28CPLD=m CONFIG_SENSORS_INA2XX=m CONFIG_SENSORS_INA3221=m CONFIG_THERMAL_GOV_POWER_ALLOCATOR=y @@ -535,6 +537,7 @@ CONFIG_QCOM_TSENS=y CONFIG_QCOM_SPMI_TEMP_ALARM=m CONFIG_UNIPHIER_THERMAL=y CONFIG_WATCHDOG=y +CONFIG_SL28CPLD_WATCHDOG=m CONFIG_ARM_SP805_WATCHDOG=y CONFIG_ARM_SBSA_WATCHDOG=y CONFIG_ARM_SMC_WATCHDOG=y @@ -560,6 +563,7 @@ CONFIG_MFD_MAX77620=y CONFIG_MFD_SPMI_PMIC=y CONFIG_MFD_RK808=y CONFIG_MFD_SEC_CORE=y +CONFIG_MFD_SL28CPLD=y CONFIG_MFD_ROHM_BD718XX=y CONFIG_MFD_WCD934X=m CONFIG_REGULATOR_FIXED_VOLTAGE=y @@ -935,8 +939,10 @@ CONFIG_PWM_MESON=m CONFIG_PWM_RCAR=m CONFIG_PWM_ROCKCHIP=y CONFIG_PWM_SAMSUNG=y +CONFIG_PWM_SL28CPLD=m CONFIG_PWM_SUN4I=m CONFIG_PWM_TEGRA=m +CONFIG_SL28CPLD_INTC=y CONFIG_QCOM_PDC=y CONFIG_RESET_QCOM_AOSS=y CONFIG_RESET_QCOM_PDC=m