From patchwork Tue Sep 8 17:45:53 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Suman Anna X-Patchwork-Id: 11763785 Return-Path: Received: from mail.kernel.org (pdx-korg-mail-1.web.codeaurora.org [172.30.200.123]) by pdx-korg-patchwork-2.web.codeaurora.org (Postfix) with ESMTP id CECE2618 for ; Tue, 8 Sep 2020 17:46:32 +0000 (UTC) Received: from merlin.infradead.org (merlin.infradead.org [205.233.59.134]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by mail.kernel.org (Postfix) with ESMTPS id 83ABC2064B for ; Tue, 8 Sep 2020 17:46:32 +0000 (UTC) Authentication-Results: mail.kernel.org; dkim=pass (2048-bit key) header.d=lists.infradead.org header.i=@lists.infradead.org header.b="COgAnJyq"; dkim=fail reason="signature verification failed" (1024-bit key) header.d=ti.com header.i=@ti.com header.b="irEMCuJI" DMARC-Filter: OpenDMARC Filter v1.3.2 mail.kernel.org 83ABC2064B Authentication-Results: mail.kernel.org; dmarc=fail (p=quarantine dis=none) header.from=ti.com Authentication-Results: mail.kernel.org; spf=none smtp.mailfrom=linux-arm-kernel-bounces+patchwork-linux-arm=patchwork.kernel.org@lists.infradead.org DKIM-Signature: v=1; a=rsa-sha256; q=dns/txt; c=relaxed/relaxed; d=lists.infradead.org; s=merlin.20170209; h=Sender:Content-Transfer-Encoding: Content-Type:Cc:List-Subscribe:List-Help:List-Post:List-Archive: List-Unsubscribe:List-Id:MIME-Version:References:In-Reply-To:Message-ID:Date: Subject:To:From:Reply-To:Content-ID:Content-Description:Resent-Date: Resent-From:Resent-Sender:Resent-To:Resent-Cc:Resent-Message-ID:List-Owner; bh=bTzZbXFy2JIzFe7Nq2I28zgeDISFsMvbVUs36oSveFA=; b=COgAnJyqpN2jinnH7GzmYs7eI jwUxNvn7y8uVy9uZNtAc4G8yxhSkSiur2dyp+6ltsQXHcg2LRkv2GcbGluKe+EUAGWFmPaSUXajrF 29bFba4/fv8OmRIR0FnrbzRKCB8EYQlAdG4c13mIKyT61F8THgewdGjnDMM+CayLRF7IqKUMFx9mg 5J2CtCQ8aULXSahVpzFIx2Dx8QfZR6NYPIPJlxWvJfTLe3eRPsGFBYCW7N9owE4nAwzEas6Mxk2Y+ oV878JIf2G1E4z9/wuaaA9mts39RZFGd0kOkht+RmV56PuQeYz8MYJDBHGkuLL4V+6y+uyyG6B1ug nGjjbltYg==; Received: from localhost ([::1] helo=merlin.infradead.org) by merlin.infradead.org with esmtp (Exim 4.92.3 #3 (Red Hat Linux)) id 1kFhhG-0007fj-1l; Tue, 08 Sep 2020 17:46:22 +0000 Received: from fllv0015.ext.ti.com ([198.47.19.141]) by merlin.infradead.org with esmtps (Exim 4.92.3 #3 (Red Hat Linux)) id 1kFhhC-0007dr-Ln for linux-arm-kernel@lists.infradead.org; Tue, 08 Sep 2020 17:46:20 +0000 Received: from fllv0034.itg.ti.com ([10.64.40.246]) by fllv0015.ext.ti.com (8.15.2/8.15.2) with ESMTP id 088HkE44119394; Tue, 8 Sep 2020 12:46:14 -0500 DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=ti.com; s=ti-com-17Q1; t=1599587174; bh=JSK4zZz0DmlXd+/r9esxNG7uNdhv0jL7DGIuM4OcCRY=; h=From:To:CC:Subject:Date:In-Reply-To:References; b=irEMCuJIBEd+i4bNkCwzbuDp4ErOp3HKCQs8vnuNMPhR0Ugmt6kZ0CEgNE0CiQYtj GVTpY0MHLHkAD5yZVYQfy0WcQWsiisR5dygEs4WMFl6zT4tRG2XzVDCELjWHJW7Z1E zXNu13tXAPDjNTutu8eRn5R3FioF0avP2u2MLXEU= Received: from DLEE106.ent.ti.com (dlee106.ent.ti.com [157.170.170.36]) by fllv0034.itg.ti.com (8.15.2/8.15.2) with ESMTPS id 088HkEKf114984 (version=TLSv1.2 cipher=AES256-GCM-SHA384 bits=256 verify=FAIL); Tue, 8 Sep 2020 12:46:14 -0500 Received: from DLEE100.ent.ti.com (157.170.170.30) by DLEE106.ent.ti.com (157.170.170.36) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA256_P256) id 15.1.1979.3; Tue, 8 Sep 2020 12:46:14 -0500 Received: from lelv0327.itg.ti.com (10.180.67.183) by DLEE100.ent.ti.com (157.170.170.30) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA256_P256) id 15.1.1979.3 via Frontend Transport; Tue, 8 Sep 2020 12:46:14 -0500 Received: from lelv0597.itg.ti.com (lelv0597.itg.ti.com [10.181.64.32]) by lelv0327.itg.ti.com (8.15.2/8.15.2) with ESMTP id 088HkEBX115946; Tue, 8 Sep 2020 12:46:14 -0500 Received: from localhost ([10.250.34.59]) by lelv0597.itg.ti.com (8.14.7/8.14.7) with ESMTP id 088HkETZ040325; Tue, 8 Sep 2020 12:46:14 -0500 From: Suman Anna To: Bjorn Andersson , Rob Herring , Mathieu Poirier Subject: [PATCH v4 1/4] dt-bindings: remoteproc: Add bindings for R5F subsystem on TI K3 SoCs Date: Tue, 8 Sep 2020 12:45:53 -0500 Message-ID: <20200908174556.21277-2-s-anna@ti.com> X-Mailer: git-send-email 2.28.0 In-Reply-To: <20200908174556.21277-1-s-anna@ti.com> References: <20200908174556.21277-1-s-anna@ti.com> MIME-Version: 1.0 X-EXCLAIMER-MD-CONFIG: e1e8a2fd-e40a-4ac6-ac9b-f7e9cc9ee180 X-CRM114-Version: 20100106-BlameMichelson ( TRE 0.8.0 (BSD) ) MR-646709E3 X-CRM114-CacheID: sfid-20200908_134618_808640_6F95B962 X-CRM114-Status: GOOD ( 25.31 ) X-Spam-Score: -2.5 (--) X-Spam-Report: SpamAssassin version 3.4.4 on merlin.infradead.org summary: Content analysis details: (-2.5 points) pts rule name description ---- ---------------------- -------------------------------------------------- -2.3 RCVD_IN_DNSWL_MED RBL: Sender listed at https://www.dnswl.org/, medium trust [198.47.19.141 listed in list.dnswl.org] 0.0 SPF_HELO_NONE SPF: HELO does not publish an SPF Record -0.0 SPF_PASS SPF: sender matches SPF record 0.1 DKIM_SIGNED Message has a DKIM or DK signature, not necessarily valid -0.1 DKIM_VALID Message has at least one valid DKIM or DK signature -0.1 DKIM_VALID_AU Message has a valid DKIM or DK signature from author's domain -0.1 DKIM_VALID_EF Message has a valid DKIM or DK signature from envelope-from domain -0.0 DKIMWL_WL_HIGH DKIMwl.org - Whitelisted High sender X-BeenThere: linux-arm-kernel@lists.infradead.org X-Mailman-Version: 2.1.29 Precedence: list List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Cc: devicetree@vger.kernel.org, Lokesh Vutla , linux-remoteproc@vger.kernel.org, linux-kernel@vger.kernel.org, linux-arm-kernel@lists.infradead.org Sender: "linux-arm-kernel" Errors-To: linux-arm-kernel-bounces+patchwork-linux-arm=patchwork.kernel.org@lists.infradead.org The Texas Instruments K3 family of SoCs have one or more dual-core Arm Cortex R5F processor subsystems/clusters (R5FSS). The clusters can be split between multiple voltage domains as well. Add the device tree bindings document for these R5F subsystem devices. These R5F processors do not have an MMU, and so require fixed memory carveout regions matching the firmware image addresses. The nodes require more than one memory region, with the first memory region used for DMA allocations at runtime. The remaining memory regions are reserved and are used for the loading and running of the R5F remote processors. The R5F processors can also optionally use any internal on-chip SRAM memories either for executing code or using it as fast-access data. The added example illustrates the DT nodes for the single R5FSS device present on K3 AM65x family of SoCs. Signed-off-by: Suman Anna --- v4: Fixed whitespace indentation (added one extra space) on required list v3: https://patchwork.kernel.org/patch/11679331/ - Replaced ti,k3-sci-proc.yaml references with the new ti,k3-sci-common.yaml - Updated required list to include the three ti,sci properties v2: https://patchwork.kernel.org/patch/11632997/ v1: https://patchwork.kernel.org/patch/11456381/ .../bindings/remoteproc/ti,k3-r5f-rproc.yaml | 281 ++++++++++++++++++ 1 file changed, 281 insertions(+) create mode 100644 Documentation/devicetree/bindings/remoteproc/ti,k3-r5f-rproc.yaml diff --git a/Documentation/devicetree/bindings/remoteproc/ti,k3-r5f-rproc.yaml b/Documentation/devicetree/bindings/remoteproc/ti,k3-r5f-rproc.yaml new file mode 100644 index 000000000000..c743b7f9e8a6 --- /dev/null +++ b/Documentation/devicetree/bindings/remoteproc/ti,k3-r5f-rproc.yaml @@ -0,0 +1,281 @@ +# SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/remoteproc/ti,k3-r5f-rproc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: TI K3 R5F processor subsystems + +maintainers: + - Suman Anna + +description: | + The TI K3 family of SoCs usually have one or more dual-core Arm Cortex R5F + processor subsystems/clusters (R5FSS). The dual core cluster can be used + either in a LockStep mode providing safety/fault tolerance features or in a + Split mode providing two individual compute cores for doubling the compute + capacity. These are used together with other processors present on the SoC + to achieve various system level goals. + + Each Dual-Core R5F sub-system is represented as a single DTS node + representing the cluster, with a pair of child DT nodes representing + the individual R5F cores. Each node has a number of required or optional + properties that enable the OS running on the host processor to perform + the device management of the remote processor and to communicate with the + remote processor. + +properties: + $nodename: + pattern: "^r5fss(@.*)?" + + compatible: + enum: + - ti,am654-r5fss + - ti,j721e-r5fss + + power-domains: + description: | + Should contain a phandle to a PM domain provider node and an args + specifier containing the R5FSS device id value. + maxItems: 1 + + "#address-cells": + const: 1 + + "#size-cells": + const: 1 + + ranges: + description: | + Standard ranges definition providing address translations for + local R5F TCM address spaces to bus addresses. + +# Optional properties: +# -------------------- + + ti,cluster-mode: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1] + description: | + Configuration Mode for the Dual R5F cores within the R5F cluster. + Should be either a value of 1 (LockStep mode) or 0 (Split mode), + default is LockStep mode if omitted. + +# R5F Processor Child Nodes: +# ========================== + +patternProperties: + "^r5f@[a-f0-9]+$": + type: object + description: | + The R5F Sub-System device node should define two R5F child nodes, each + node representing a TI instantiation of the Arm Cortex R5F core. There + are some specific integration differences for the IP like the usage of + a Region Address Translator (RAT) for translating the larger SoC bus + addresses into a 32-bit address space for the processor. + + Each R5F core has an associated 64 KB of Tightly-Coupled Memory (TCM) + internal memories split between two banks - TCMA and TCMB (further + interleaved into two banks TCMB0 and TCMB1). These memories (also called + ATCM and BTCM) provide read/write performance on par with the core's L1 + caches. Each of the TCMs can be enabled or disabled independently and + either of them can be configured to appear at that R5F's address 0x0. + + The cores do not use an MMU, but has a Region Address Translater + (RAT) module that is accessible only from the R5Fs for providing + translations between 32-bit CPU addresses into larger system bus + addresses. Cache and memory access settings are provided through a + Memory Protection Unit (MPU), programmable only from the R5Fs. + + allOf: + - $ref: /schemas/arm/keystone/ti,k3-sci-common.yaml# + + properties: + compatible: + enum: + - ti,am654-r5f + - ti,j721e-r5f + + reg: + items: + - description: Address and Size of the ATCM internal memory region + - description: Address and Size of the BTCM internal memory region + + reg-names: + items: + - const: atcm + - const: btcm + + resets: + description: | + Should contain the phandle to the reset controller node managing the + local resets for this device, and a reset specifier. + maxItems: 1 + + firmware-name: + description: | + Should contain the name of the default firmware image + file located on the firmware search path + +# The following properties are mandatory for R5F Core0 in both LockStep and Split +# modes, and are mandatory for R5F Core1 _only_ in Split mode. They are unused for +# R5F Core1 in LockStep mode: + + mboxes: + description: | + OMAP Mailbox specifier denoting the sub-mailbox, to be used for + communication with the remote processor. This property should match + with the sub-mailbox node used in the firmware image. + maxItems: 1 + + memory-region: + description: | + phandle to the reserved memory nodes to be associated with the + remoteproc device. There should be at least two reserved memory nodes + defined. The reserved memory nodes should be carveout nodes, and + should be defined with a "no-map" property as per the bindings in + Documentation/devicetree/bindings/reserved-memory/reserved-memory.txt + minItems: 2 + maxItems: 8 + items: + - description: region used for dynamic DMA allocations like vrings and + vring buffers + - description: region reserved for firmware image sections + additionalItems: true + + +# Optional properties: +# -------------------- +# The following properties are optional properties for each of the R5F cores: + + ti,atcm-enable: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1] + description: | + R5F core configuration mode dictating if ATCM should be enabled. The + R5F address of ATCM is dictated by ti,loczrama property. Should be + either a value of 1 (enabled) or 0 (disabled), default is disabled + if omitted. Recommended to enable it for maximizing TCMs. + + ti,btcm-enable: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1] + description: | + R5F core configuration mode dictating if BTCM should be enabled. The + R5F address of BTCM is dictated by ti,loczrama property. Should be + either a value of 1 (enabled) or 0 (disabled), default is enabled if + omitted. + + ti,loczrama: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1] + description: | + R5F core configuration mode dictating which TCM should appear at + address 0 (from core's view). Should be either a value of 1 (ATCM + at 0x0) or 0 (BTCM at 0x0), default value is 1 if omitted. + + sram: + $ref: /schemas/types.yaml#/definitions/phandle-array + minItems: 1 + maxItems: 4 + description: | + phandles to one or more reserved on-chip SRAM regions. The regions + should be defined as child nodes of the respective SRAM node, and + should be defined as per the generic bindings in, + Documentation/devicetree/bindings/sram/sram.yaml + + required: + - compatible + - reg + - reg-names + - ti,sci + - ti,sci-dev-id + - ti,sci-proc-ids + - resets + - firmware-name + + unevaluatedProperties: false + +required: + - compatible + - power-domains + - "#address-cells" + - "#size-cells" + - ranges + +additionalProperties: false + +examples: + - | + / { + model = "Texas Instruments K3 AM654 SoC"; + compatible = "ti,am654"; + #address-cells = <2>; + #size-cells = <2>; + + bus@100000 { + compatible = "simple-bus"; + #address-cells = <2>; + #size-cells = <2>; + ranges = <0x00 0x00100000 0x00 0x00100000 0x00 0x00020000>, /* ctrl mmr */ + <0x00 0x41000000 0x00 0x41000000 0x00 0x00020000>, + <0x00 0x41400000 0x00 0x41400000 0x00 0x00020000>, + <0x00 0x41c00000 0x00 0x41c00000 0x00 0x00080000>; + + bus@28380000 { + compatible = "simple-bus"; + #address-cells = <2>; + #size-cells = <2>; + ranges = <0x00 0x28380000 0x00 0x28380000 0x00 0x03880000>, /* MCU NAVSS */ + <0x00 0x41000000 0x00 0x41000000 0x00 0x00020000>, /* MCU R5F Core0 */ + <0x00 0x41400000 0x00 0x41400000 0x00 0x00020000>, /* MCU R5F Core1 */ + <0x00 0x41c00000 0x00 0x41c00000 0x00 0x00080000>; /* MCU SRAM */ + + /* AM65x MCU R5FSS node */ + mcu_r5fss0: r5fss@41000000 { + compatible = "ti,am654-r5fss"; + power-domains = <&k3_pds 129>; + ti,cluster-mode = <1>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x41000000 0x00 0x41000000 0x20000>, + <0x41400000 0x00 0x41400000 0x20000>; + + mcu_r5f0: r5f@41000000 { + compatible = "ti,am654-r5f"; + reg = <0x41000000 0x00008000>, + <0x41010000 0x00008000>; + reg-names = "atcm", "btcm"; + ti,sci = <&dmsc>; + ti,sci-dev-id = <159>; + ti,sci-proc-ids = <0x01 0xFF>; + resets = <&k3_reset 159 1>; + firmware-name = "am65x-mcu-r5f0_0-fw"; + ti,atcm-enable = <1>; + ti,btcm-enable = <1>; + ti,loczrama = <1>; + mboxes = <&mailbox0 &mbox_mcu_r5fss0_core0>; + memory-region = <&mcu_r5fss0_core0_dma_memory_region>, + <&mcu_r5fss0_core0_memory_region>; + sram = <&mcu_r5fss0_core0_sram>; + }; + + mcu_r5f1: r5f@41400000 { + compatible = "ti,am654-r5f"; + reg = <0x41400000 0x00008000>, + <0x41410000 0x00008000>; + reg-names = "atcm", "btcm"; + ti,sci = <&dmsc>; + ti,sci-dev-id = <245>; + ti,sci-proc-ids = <0x02 0xFF>; + resets = <&k3_reset 245 1>; + firmware-name = "am65x-mcu-r5f0_1-fw"; + ti,atcm-enable = <1>; + ti,btcm-enable = <1>; + ti,loczrama = <1>; + mboxes = <&mailbox1 &mbox_mcu_r5fss0_core1>; + }; + }; + }; + }; + }; From patchwork Tue Sep 8 17:45:54 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Suman Anna X-Patchwork-Id: 11763787 Return-Path: Received: from mail.kernel.org (pdx-korg-mail-1.web.codeaurora.org [172.30.200.123]) by pdx-korg-patchwork-2.web.codeaurora.org (Postfix) with ESMTP id 279FE13B1 for ; Tue, 8 Sep 2020 17:46:43 +0000 (UTC) Received: from merlin.infradead.org (merlin.infradead.org [205.233.59.134]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by mail.kernel.org (Postfix) with ESMTPS id ADD3D20936 for ; Tue, 8 Sep 2020 17:46:42 +0000 (UTC) Authentication-Results: mail.kernel.org; dkim=pass (2048-bit key) header.d=lists.infradead.org header.i=@lists.infradead.org header.b="NUYzyu0t"; dkim=fail reason="signature verification failed" (1024-bit key) header.d=ti.com header.i=@ti.com header.b="buEJs0Jx" DMARC-Filter: OpenDMARC Filter v1.3.2 mail.kernel.org ADD3D20936 Authentication-Results: mail.kernel.org; dmarc=fail (p=quarantine dis=none) header.from=ti.com Authentication-Results: mail.kernel.org; spf=none smtp.mailfrom=linux-arm-kernel-bounces+patchwork-linux-arm=patchwork.kernel.org@lists.infradead.org DKIM-Signature: v=1; a=rsa-sha256; q=dns/txt; c=relaxed/relaxed; d=lists.infradead.org; s=merlin.20170209; h=Sender:Content-Transfer-Encoding: Content-Type:Cc:List-Subscribe:List-Help:List-Post:List-Archive: List-Unsubscribe:List-Id:MIME-Version:References:In-Reply-To:Message-ID:Date: Subject:To:From:Reply-To:Content-ID:Content-Description:Resent-Date: Resent-From:Resent-Sender:Resent-To:Resent-Cc:Resent-Message-ID:List-Owner; bh=Z6QxwL3DaH68TuYq53djww0L9bRfpM8T0Fdz3f3DK4U=; b=NUYzyu0tvWAjTuYy9eLJ5Hzt7 GG6ll3/hWHacHbFFfAFqlREoRUtEukb2Tq0K8fuv5i7nvaubFARQSf8I39hbegMxsCQK1CUhhQ7kW MFK4vw9aBr3rMy/SxekYkvWLqRzQDAUYrRACQJGApFss+BGS68P2B9wnS/MFU9bpQ2+/nwnLnDP1E skIm5gAs5CmtTOoFvmNaWDEiOKW20Hu8p8LffXSUx0Oq/j0EQhOXMWBLfaGIEn4ZcRgpCilOUJBFy 9YPfTYm26IGTkr5bbA3o00GQrCGXtpBAAvMHJoTro4IIVkY6TUjAAL6mmo2zwqopQd0TvoCR2/jj8 z6oiNcsqw==; Received: from localhost ([::1] helo=merlin.infradead.org) by merlin.infradead.org with esmtp (Exim 4.92.3 #3 (Red Hat Linux)) id 1kFhhN-0007hd-Bq; Tue, 08 Sep 2020 17:46:29 +0000 Received: from lelv0143.ext.ti.com ([198.47.23.248]) by merlin.infradead.org with esmtps (Exim 4.92.3 #3 (Red Hat Linux)) id 1kFhhH-0007fz-5r for linux-arm-kernel@lists.infradead.org; Tue, 08 Sep 2020 17:46:27 +0000 Received: from fllv0034.itg.ti.com ([10.64.40.246]) by lelv0143.ext.ti.com (8.15.2/8.15.2) with ESMTP id 088HkKps016274; Tue, 8 Sep 2020 12:46:20 -0500 DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=ti.com; s=ti-com-17Q1; t=1599587180; bh=RJJc8dJR/cwLTmV2ls5kLcWY3rVCQBC8vaP9kOT4X3c=; h=From:To:CC:Subject:Date:In-Reply-To:References; b=buEJs0Jx6ZmYXOkuhLMYaNZ40ZNQFG9Tg7F53LPdAFq7XQzx8jjF2YuM0cw1z5wH1 PdiE9r3je7hqAl5Jf6EOe7DWx2+hfFXL/ZCjD+Gq29JvKOendDEDksXoQaIHjcL5S2 +rkCWCqp24iOOsOqe6Ffqn+vJocR7UClmrSRrpdk= Received: from DLEE106.ent.ti.com (dlee106.ent.ti.com [157.170.170.36]) by fllv0034.itg.ti.com (8.15.2/8.15.2) with ESMTPS id 088HkKWU115047 (version=TLSv1.2 cipher=AES256-GCM-SHA384 bits=256 verify=FAIL); Tue, 8 Sep 2020 12:46:20 -0500 Received: from DLEE101.ent.ti.com (157.170.170.31) by DLEE106.ent.ti.com (157.170.170.36) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA256_P256) id 15.1.1979.3; Tue, 8 Sep 2020 12:46:20 -0500 Received: from lelv0326.itg.ti.com (10.180.67.84) by DLEE101.ent.ti.com (157.170.170.31) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA256_P256) id 15.1.1979.3 via Frontend Transport; Tue, 8 Sep 2020 12:46:20 -0500 Received: from lelv0597.itg.ti.com (lelv0597.itg.ti.com [10.181.64.32]) by lelv0326.itg.ti.com (8.15.2/8.15.2) with ESMTP id 088HkKrW063516; Tue, 8 Sep 2020 12:46:20 -0500 Received: from localhost ([10.250.34.59]) by lelv0597.itg.ti.com (8.14.7/8.14.7) with ESMTP id 088HkKZc040355; Tue, 8 Sep 2020 12:46:20 -0500 From: Suman Anna To: Bjorn Andersson , Rob Herring , Mathieu Poirier Subject: [PATCH v4 2/4] remoteproc: k3-r5: Add a remoteproc driver for R5F subsystem Date: Tue, 8 Sep 2020 12:45:54 -0500 Message-ID: <20200908174556.21277-3-s-anna@ti.com> X-Mailer: git-send-email 2.28.0 In-Reply-To: <20200908174556.21277-1-s-anna@ti.com> References: <20200908174556.21277-1-s-anna@ti.com> MIME-Version: 1.0 X-EXCLAIMER-MD-CONFIG: e1e8a2fd-e40a-4ac6-ac9b-f7e9cc9ee180 X-CRM114-Version: 20100106-BlameMichelson ( TRE 0.8.0 (BSD) ) MR-646709E3 X-CRM114-CacheID: sfid-20200908_134623_381054_8BA76B28 X-CRM114-Status: GOOD ( 34.53 ) X-Spam-Score: -2.5 (--) X-Spam-Report: SpamAssassin version 3.4.4 on merlin.infradead.org summary: Content analysis details: (-2.5 points) pts rule name description ---- ---------------------- -------------------------------------------------- -2.3 RCVD_IN_DNSWL_MED RBL: Sender listed at https://www.dnswl.org/, medium trust [198.47.23.248 listed in list.dnswl.org] 0.0 SPF_HELO_NONE SPF: HELO does not publish an SPF Record -0.0 SPF_PASS SPF: sender matches SPF record 0.1 DKIM_SIGNED Message has a DKIM or DK signature, not necessarily valid -0.1 DKIM_VALID Message has at least one valid DKIM or DK signature -0.1 DKIM_VALID_AU Message has a valid DKIM or DK signature from author's domain -0.1 DKIM_VALID_EF Message has a valid DKIM or DK signature from envelope-from domain -0.0 DKIMWL_WL_HIGH DKIMwl.org - Whitelisted High sender X-BeenThere: linux-arm-kernel@lists.infradead.org X-Mailman-Version: 2.1.29 Precedence: list List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Cc: devicetree@vger.kernel.org, Lokesh Vutla , linux-remoteproc@vger.kernel.org, linux-kernel@vger.kernel.org, linux-arm-kernel@lists.infradead.org Sender: "linux-arm-kernel" Errors-To: linux-arm-kernel-bounces+patchwork-linux-arm=patchwork.kernel.org@lists.infradead.org The TI K3 family of SoCs typically have one or more dual-core Arm Cortex R5F processor clusters/subsystems (R5FSS). This R5F subsystem/cluster can be configured at boot time to be either run in a LockStep mode or in an Asymmetric Multi Processing (AMP) fashion in Split-mode. This subsystem has 64 KB each Tightly-Coupled Memory (TCM) internal memories for each core split between two banks - TCMA and TCMB (further interleaved into two banks). The subsystem does not have an MMU, but has a Region Address Translater (RAT) module that is accessible only from the R5Fs for providing translations between 32-bit CPU addresses into larger system bus addresses. Add a remoteproc driver to support this subsystem to be able to load and boot the R5F cores primarily in LockStep mode. The code also includes the base support for Split mode. Error Recovery and Power Management features are not currently supported. Loading support includes the internal TCMs and DDR. RAT support is left for a future patch, and as such the reserved memory carveout regions are all expected to be using memory regions within the first 2 GB. The R5F remote processors do not have an MMU, and so require fixed memory carveout regions matching the firmware image addresses. Support for this is provided by mandating multiple memory regions to be attached to the remoteproc device. The first memory region will be used to serve as the DMA pool for all dynamic allocations like the vrings and vring buffers. The remaining memory regions are mapped into the kernel at device probe time, and are used to provide address translations for firmware image segments without the need for any RSC_CARVEOUT entries. Any firmware image using memory outside of the supplied reserved memory carveout regions will be errored out. The R5F processors on TI K3 SoCs require a specific sequence for booting and shutting down the processors. This sequence is also dependent on the mode (LockStep or Split) the R5F cluster is configured for. The R5F cores have a Memory Protection Unit (MPU) that has a default configuration that does not allow the cores to run out of DDR out of reset. This is resolved by using the TCMs for boot-strapping code that applies the appropriate executable permissions on desired DDR memory. The loading into the TCMs requires that the resets be released first with the cores in halted state. The Power Sleep Controller (PSC) module on K3 SoCs requires that the cores be in WFI/WFE states with no active bus transactions before the cores can be put back into reset. Support for this is provided by using the newly introduced .prepare() and .unprepare() ops in the remoteproc core. The .prepare() ops is invoked before any loading, and the .unprepare() ops is invoked after the remoteproc resource cleanup. The R5F core resets are deasserted in .prepare() and asserted in .unprepare(), and the cores themselves are started and halted in .start() and .stop() ops. This ensures symmetric usage and allows the R5F cores state machine to be maintained properly between using the sysfs 'state' variable, bind/unbind and regular module load/unload flows. The subsystem is represented as a single remoteproc in LockStep mode, and as two remoteprocs in Split mode. The driver uses various TI-SCI interfaces to talk to the System Controller (DMSC) for managing configuration, power and reset management of these cores. IPC between the A53 cores and the R5 cores is supported through the virtio rpmsg stack using shared memory and OMAP Mailboxes. The AM65x SoCs typically have a single R5FSS in the MCU voltage domain. The J721E SoCs uses a slightly revised IP and typically have three R5FSSs, with one cluster present within the MCU voltage domain (MCU_R5FSS0), and the remaining two clusters present in the MAIN voltage domain (MAIN_R5FSS0 and MAIN_R5FSS1). The integration of these clusters on J721E SoC is also slightly different in that these IPs do support an actual local reset line, while they are a no-op on AM65x SoCs. Signed-off-by: Suman Anna Reviewed-by: Mathieu Poirier --- v4: - Fixed error check and return code around devm_ioremap_wc in k3_r5_core_of_get_internal_memories() function v3: https://patchwork.kernel.org/patch/11679333/ - Addressed the last few minor comments from Mathieu - Removed the ti_sci_protocol.h header inclusion - Fixed the error checks on devm_reset_control_get_exclusive() - Removed the unnecessary cpu_addr check in failure path in k3_r5_reserved_mem_init() - Replaced http with http v2: https://patchwork.kernel.org/patch/11632995/ v1: https://patchwork.kernel.org/patch/11456375/ drivers/remoteproc/Kconfig | 13 + drivers/remoteproc/Makefile | 1 + drivers/remoteproc/ti_k3_r5_remoteproc.c | 1303 ++++++++++++++++++++++ 3 files changed, 1317 insertions(+) create mode 100644 drivers/remoteproc/ti_k3_r5_remoteproc.c diff --git a/drivers/remoteproc/Kconfig b/drivers/remoteproc/Kconfig index c6659dfea7c7..498fbeb94a28 100644 --- a/drivers/remoteproc/Kconfig +++ b/drivers/remoteproc/Kconfig @@ -275,6 +275,19 @@ config TI_K3_DSP_REMOTEPROC It's safe to say N here if you're not interested in utilizing the DSP slave processors. +config TI_K3_R5_REMOTEPROC + tristate "TI K3 R5 remoteproc support" + depends on ARCH_K3 + select MAILBOX + select OMAP2PLUS_MBOX + help + Say m here to support TI's R5F remote processor subsystems + on various TI K3 family of SoCs through the remote processor + framework. + + It's safe to say N here if you're not interested in utilizing + a slave processor. + endif # REMOTEPROC endmenu diff --git a/drivers/remoteproc/Makefile b/drivers/remoteproc/Makefile index 3dfa28e6c701..da2ace4ec86c 100644 --- a/drivers/remoteproc/Makefile +++ b/drivers/remoteproc/Makefile @@ -33,3 +33,4 @@ obj-$(CONFIG_ST_REMOTEPROC) += st_remoteproc.o obj-$(CONFIG_ST_SLIM_REMOTEPROC) += st_slim_rproc.o obj-$(CONFIG_STM32_RPROC) += stm32_rproc.o obj-$(CONFIG_TI_K3_DSP_REMOTEPROC) += ti_k3_dsp_remoteproc.o +obj-$(CONFIG_TI_K3_R5_REMOTEPROC) += ti_k3_r5_remoteproc.o diff --git a/drivers/remoteproc/ti_k3_r5_remoteproc.c b/drivers/remoteproc/ti_k3_r5_remoteproc.c new file mode 100644 index 000000000000..15e52ea67bbe --- /dev/null +++ b/drivers/remoteproc/ti_k3_r5_remoteproc.c @@ -0,0 +1,1303 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * TI K3 R5F (MCU) Remote Processor driver + * + * Copyright (C) 2017-2020 Texas Instruments Incorporated - https://www.ti.com/ + * Suman Anna + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "omap_remoteproc.h" +#include "remoteproc_internal.h" +#include "ti_sci_proc.h" + +/* This address can either be for ATCM or BTCM with the other at address 0x0 */ +#define K3_R5_TCM_DEV_ADDR 0x41010000 + +/* R5 TI-SCI Processor Configuration Flags */ +#define PROC_BOOT_CFG_FLAG_R5_DBG_EN 0x00000001 +#define PROC_BOOT_CFG_FLAG_R5_DBG_NIDEN 0x00000002 +#define PROC_BOOT_CFG_FLAG_R5_LOCKSTEP 0x00000100 +#define PROC_BOOT_CFG_FLAG_R5_TEINIT 0x00000200 +#define PROC_BOOT_CFG_FLAG_R5_NMFI_EN 0x00000400 +#define PROC_BOOT_CFG_FLAG_R5_TCM_RSTBASE 0x00000800 +#define PROC_BOOT_CFG_FLAG_R5_BTCM_EN 0x00001000 +#define PROC_BOOT_CFG_FLAG_R5_ATCM_EN 0x00002000 + +/* R5 TI-SCI Processor Control Flags */ +#define PROC_BOOT_CTRL_FLAG_R5_CORE_HALT 0x00000001 + +/* R5 TI-SCI Processor Status Flags */ +#define PROC_BOOT_STATUS_FLAG_R5_WFE 0x00000001 +#define PROC_BOOT_STATUS_FLAG_R5_WFI 0x00000002 +#define PROC_BOOT_STATUS_FLAG_R5_CLK_GATED 0x00000004 +#define PROC_BOOT_STATUS_FLAG_R5_LOCKSTEP_PERMITTED 0x00000100 + +/** + * struct k3_r5_mem - internal memory structure + * @cpu_addr: MPU virtual address of the memory region + * @bus_addr: Bus address used to access the memory region + * @dev_addr: Device address from remoteproc view + * @size: Size of the memory region + */ +struct k3_r5_mem { + void __iomem *cpu_addr; + phys_addr_t bus_addr; + u32 dev_addr; + size_t size; +}; + +enum cluster_mode { + CLUSTER_MODE_SPLIT = 0, + CLUSTER_MODE_LOCKSTEP, +}; + +/** + * struct k3_r5_cluster - K3 R5F Cluster structure + * @dev: cached device pointer + * @mode: Mode to configure the Cluster - Split or LockStep + * @cores: list of R5 cores within the cluster + */ +struct k3_r5_cluster { + struct device *dev; + enum cluster_mode mode; + struct list_head cores; +}; + +/** + * struct k3_r5_core - K3 R5 core structure + * @elem: linked list item + * @dev: cached device pointer + * @rproc: rproc handle representing this core + * @mem: internal memory regions data + * @num_mems: number of internal memory regions + * @reset: reset control handle + * @tsp: TI-SCI processor control handle + * @ti_sci: TI-SCI handle + * @ti_sci_id: TI-SCI device identifier + * @atcm_enable: flag to control ATCM enablement + * @btcm_enable: flag to control BTCM enablement + * @loczrama: flag to dictate which TCM is at device address 0x0 + */ +struct k3_r5_core { + struct list_head elem; + struct device *dev; + struct rproc *rproc; + struct k3_r5_mem *mem; + int num_mems; + struct reset_control *reset; + struct ti_sci_proc *tsp; + const struct ti_sci_handle *ti_sci; + u32 ti_sci_id; + u32 atcm_enable; + u32 btcm_enable; + u32 loczrama; +}; + +/** + * struct k3_r5_rproc - K3 remote processor state + * @dev: cached device pointer + * @cluster: cached pointer to parent cluster structure + * @mbox: mailbox channel handle + * @client: mailbox client to request the mailbox channel + * @rproc: rproc handle + * @core: cached pointer to r5 core structure being used + * @rmem: reserved memory regions data + * @num_rmems: number of reserved memory regions + */ +struct k3_r5_rproc { + struct device *dev; + struct k3_r5_cluster *cluster; + struct mbox_chan *mbox; + struct mbox_client client; + struct rproc *rproc; + struct k3_r5_core *core; + struct k3_r5_mem *rmem; + int num_rmems; +}; + +/** + * k3_r5_rproc_mbox_callback() - inbound mailbox message handler + * @client: mailbox client pointer used for requesting the mailbox channel + * @data: mailbox payload + * + * This handler is invoked by the OMAP mailbox driver whenever a mailbox + * message is received. Usually, the mailbox payload simply contains + * the index of the virtqueue that is kicked by the remote processor, + * and we let remoteproc core handle it. + * + * In addition to virtqueue indices, we also have some out-of-band values + * that indicate different events. Those values are deliberately very + * large so they don't coincide with virtqueue indices. + */ +static void k3_r5_rproc_mbox_callback(struct mbox_client *client, void *data) +{ + struct k3_r5_rproc *kproc = container_of(client, struct k3_r5_rproc, + client); + struct device *dev = kproc->rproc->dev.parent; + const char *name = kproc->rproc->name; + u32 msg = omap_mbox_message(data); + + dev_dbg(dev, "mbox msg: 0x%x\n", msg); + + switch (msg) { + case RP_MBOX_CRASH: + /* + * remoteproc detected an exception, but error recovery is not + * supported. So, just log this for now + */ + dev_err(dev, "K3 R5F rproc %s crashed\n", name); + break; + case RP_MBOX_ECHO_REPLY: + dev_info(dev, "received echo reply from %s\n", name); + break; + default: + /* silently handle all other valid messages */ + if (msg >= RP_MBOX_READY && msg < RP_MBOX_END_MSG) + return; + if (msg > kproc->rproc->max_notifyid) { + dev_dbg(dev, "dropping unknown message 0x%x", msg); + return; + } + /* msg contains the index of the triggered vring */ + if (rproc_vq_interrupt(kproc->rproc, msg) == IRQ_NONE) + dev_dbg(dev, "no message was found in vqid %d\n", msg); + } +} + +/* kick a virtqueue */ +static void k3_r5_rproc_kick(struct rproc *rproc, int vqid) +{ + struct k3_r5_rproc *kproc = rproc->priv; + struct device *dev = rproc->dev.parent; + mbox_msg_t msg = (mbox_msg_t)vqid; + int ret; + + /* send the index of the triggered virtqueue in the mailbox payload */ + ret = mbox_send_message(kproc->mbox, (void *)msg); + if (ret < 0) + dev_err(dev, "failed to send mailbox message, status = %d\n", + ret); +} + +static int k3_r5_split_reset(struct k3_r5_core *core) +{ + int ret; + + ret = reset_control_assert(core->reset); + if (ret) { + dev_err(core->dev, "local-reset assert failed, ret = %d\n", + ret); + return ret; + } + + ret = core->ti_sci->ops.dev_ops.put_device(core->ti_sci, + core->ti_sci_id); + if (ret) { + dev_err(core->dev, "module-reset assert failed, ret = %d\n", + ret); + if (reset_control_deassert(core->reset)) + dev_warn(core->dev, "local-reset deassert back failed\n"); + } + + return ret; +} + +static int k3_r5_split_release(struct k3_r5_core *core) +{ + int ret; + + ret = core->ti_sci->ops.dev_ops.get_device(core->ti_sci, + core->ti_sci_id); + if (ret) { + dev_err(core->dev, "module-reset deassert failed, ret = %d\n", + ret); + return ret; + } + + ret = reset_control_deassert(core->reset); + if (ret) { + dev_err(core->dev, "local-reset deassert failed, ret = %d\n", + ret); + if (core->ti_sci->ops.dev_ops.put_device(core->ti_sci, + core->ti_sci_id)) + dev_warn(core->dev, "module-reset assert back failed\n"); + } + + return ret; +} + +static int k3_r5_lockstep_reset(struct k3_r5_cluster *cluster) +{ + struct k3_r5_core *core; + int ret; + + /* assert local reset on all applicable cores */ + list_for_each_entry(core, &cluster->cores, elem) { + ret = reset_control_assert(core->reset); + if (ret) { + dev_err(core->dev, "local-reset assert failed, ret = %d\n", + ret); + core = list_prev_entry(core, elem); + goto unroll_local_reset; + } + } + + /* disable PSC modules on all applicable cores */ + list_for_each_entry(core, &cluster->cores, elem) { + ret = core->ti_sci->ops.dev_ops.put_device(core->ti_sci, + core->ti_sci_id); + if (ret) { + dev_err(core->dev, "module-reset assert failed, ret = %d\n", + ret); + goto unroll_module_reset; + } + } + + return 0; + +unroll_module_reset: + list_for_each_entry_continue_reverse(core, &cluster->cores, elem) { + if (core->ti_sci->ops.dev_ops.put_device(core->ti_sci, + core->ti_sci_id)) + dev_warn(core->dev, "module-reset assert back failed\n"); + } + core = list_last_entry(&cluster->cores, struct k3_r5_core, elem); +unroll_local_reset: + list_for_each_entry_from_reverse(core, &cluster->cores, elem) { + if (reset_control_deassert(core->reset)) + dev_warn(core->dev, "local-reset deassert back failed\n"); + } + + return ret; +} + +static int k3_r5_lockstep_release(struct k3_r5_cluster *cluster) +{ + struct k3_r5_core *core; + int ret; + + /* enable PSC modules on all applicable cores */ + list_for_each_entry_reverse(core, &cluster->cores, elem) { + ret = core->ti_sci->ops.dev_ops.get_device(core->ti_sci, + core->ti_sci_id); + if (ret) { + dev_err(core->dev, "module-reset deassert failed, ret = %d\n", + ret); + core = list_next_entry(core, elem); + goto unroll_module_reset; + } + } + + /* deassert local reset on all applicable cores */ + list_for_each_entry_reverse(core, &cluster->cores, elem) { + ret = reset_control_deassert(core->reset); + if (ret) { + dev_err(core->dev, "module-reset deassert failed, ret = %d\n", + ret); + goto unroll_local_reset; + } + } + + return 0; + +unroll_local_reset: + list_for_each_entry_continue(core, &cluster->cores, elem) { + if (reset_control_assert(core->reset)) + dev_warn(core->dev, "local-reset assert back failed\n"); + } + core = list_first_entry(&cluster->cores, struct k3_r5_core, elem); +unroll_module_reset: + list_for_each_entry_from(core, &cluster->cores, elem) { + if (core->ti_sci->ops.dev_ops.put_device(core->ti_sci, + core->ti_sci_id)) + dev_warn(core->dev, "module-reset assert back failed\n"); + } + + return ret; +} + +static inline int k3_r5_core_halt(struct k3_r5_core *core) +{ + return ti_sci_proc_set_control(core->tsp, + PROC_BOOT_CTRL_FLAG_R5_CORE_HALT, 0); +} + +static inline int k3_r5_core_run(struct k3_r5_core *core) +{ + return ti_sci_proc_set_control(core->tsp, + 0, PROC_BOOT_CTRL_FLAG_R5_CORE_HALT); +} + +/* + * The R5F cores have controls for both a reset and a halt/run. The code + * execution from DDR requires the initial boot-strapping code to be run + * from the internal TCMs. This function is used to release the resets on + * applicable cores to allow loading into the TCMs. The .prepare() ops is + * invoked by remoteproc core before any firmware loading, and is followed + * by the .start() ops after loading to actually let the R5 cores run. + */ +static int k3_r5_rproc_prepare(struct rproc *rproc) +{ + struct k3_r5_rproc *kproc = rproc->priv; + struct k3_r5_cluster *cluster = kproc->cluster; + struct k3_r5_core *core = kproc->core; + struct device *dev = kproc->dev; + int ret; + + ret = (cluster->mode == CLUSTER_MODE_LOCKSTEP) ? + k3_r5_lockstep_release(cluster) : k3_r5_split_release(core); + if (ret) + dev_err(dev, "unable to enable cores for TCM loading, ret = %d\n", + ret); + + return ret; +} + +/* + * This function implements the .unprepare() ops and performs the complimentary + * operations to that of the .prepare() ops. The function is used to assert the + * resets on all applicable cores for the rproc device (depending on LockStep + * or Split mode). This completes the second portion of powering down the R5F + * cores. The cores themselves are only halted in the .stop() ops, and the + * .unprepare() ops is invoked by the remoteproc core after the remoteproc is + * stopped. + */ +static int k3_r5_rproc_unprepare(struct rproc *rproc) +{ + struct k3_r5_rproc *kproc = rproc->priv; + struct k3_r5_cluster *cluster = kproc->cluster; + struct k3_r5_core *core = kproc->core; + struct device *dev = kproc->dev; + int ret; + + ret = (cluster->mode == CLUSTER_MODE_LOCKSTEP) ? + k3_r5_lockstep_reset(cluster) : k3_r5_split_reset(core); + if (ret) + dev_err(dev, "unable to disable cores, ret = %d\n", ret); + + return ret; +} + +/* + * The R5F start sequence includes two different operations + * 1. Configure the boot vector for R5F core(s) + * 2. Unhalt/Run the R5F core(s) + * + * The sequence is different between LockStep and Split modes. The LockStep + * mode requires the boot vector to be configured only for Core0, and then + * unhalt both the cores to start the execution - Core1 needs to be unhalted + * first followed by Core0. The Split-mode requires that Core0 to be maintained + * always in a higher power state that Core1 (implying Core1 needs to be started + * always only after Core0 is started). + */ +static int k3_r5_rproc_start(struct rproc *rproc) +{ + struct k3_r5_rproc *kproc = rproc->priv; + struct k3_r5_cluster *cluster = kproc->cluster; + struct mbox_client *client = &kproc->client; + struct device *dev = kproc->dev; + struct k3_r5_core *core; + u32 boot_addr; + int ret; + + client->dev = dev; + client->tx_done = NULL; + client->rx_callback = k3_r5_rproc_mbox_callback; + client->tx_block = false; + client->knows_txdone = false; + + kproc->mbox = mbox_request_channel(client, 0); + if (IS_ERR(kproc->mbox)) { + ret = -EBUSY; + dev_err(dev, "mbox_request_channel failed: %ld\n", + PTR_ERR(kproc->mbox)); + return ret; + } + + /* + * Ping the remote processor, this is only for sanity-sake for now; + * there is no functional effect whatsoever. + * + * Note that the reply will _not_ arrive immediately: this message + * will wait in the mailbox fifo until the remote processor is booted. + */ + ret = mbox_send_message(kproc->mbox, (void *)RP_MBOX_ECHO_REQUEST); + if (ret < 0) { + dev_err(dev, "mbox_send_message failed: %d\n", ret); + goto put_mbox; + } + + boot_addr = rproc->bootaddr; + /* TODO: add boot_addr sanity checking */ + dev_dbg(dev, "booting R5F core using boot addr = 0x%x\n", boot_addr); + + /* boot vector need not be programmed for Core1 in LockStep mode */ + core = kproc->core; + ret = ti_sci_proc_set_config(core->tsp, boot_addr, 0, 0); + if (ret) + goto put_mbox; + + /* unhalt/run all applicable cores */ + if (cluster->mode == CLUSTER_MODE_LOCKSTEP) { + list_for_each_entry_reverse(core, &cluster->cores, elem) { + ret = k3_r5_core_run(core); + if (ret) + goto unroll_core_run; + } + } else { + ret = k3_r5_core_run(core); + if (ret) + goto put_mbox; + } + + return 0; + +unroll_core_run: + list_for_each_entry_continue(core, &cluster->cores, elem) { + if (k3_r5_core_halt(core)) + dev_warn(core->dev, "core halt back failed\n"); + } +put_mbox: + mbox_free_channel(kproc->mbox); + return ret; +} + +/* + * The R5F stop function includes the following operations + * 1. Halt R5F core(s) + * + * The sequence is different between LockStep and Split modes, and the order + * of cores the operations are performed are also in general reverse to that + * of the start function. The LockStep mode requires each operation to be + * performed first on Core0 followed by Core1. The Split-mode requires that + * Core0 to be maintained always in a higher power state that Core1 (implying + * Core1 needs to be stopped first before Core0). + * + * Note that the R5F halt operation in general is not effective when the R5F + * core is running, but is needed to make sure the core won't run after + * deasserting the reset the subsequent time. The asserting of reset can + * be done here, but is preferred to be done in the .unprepare() ops - this + * maintains the symmetric behavior between the .start(), .stop(), .prepare() + * and .unprepare() ops, and also balances them well between sysfs 'state' + * flow and device bind/unbind or module removal. + */ +static int k3_r5_rproc_stop(struct rproc *rproc) +{ + struct k3_r5_rproc *kproc = rproc->priv; + struct k3_r5_cluster *cluster = kproc->cluster; + struct k3_r5_core *core = kproc->core; + int ret; + + /* halt all applicable cores */ + if (cluster->mode == CLUSTER_MODE_LOCKSTEP) { + list_for_each_entry(core, &cluster->cores, elem) { + ret = k3_r5_core_halt(core); + if (ret) { + core = list_prev_entry(core, elem); + goto unroll_core_halt; + } + } + } else { + ret = k3_r5_core_halt(core); + if (ret) + goto out; + } + + mbox_free_channel(kproc->mbox); + + return 0; + +unroll_core_halt: + list_for_each_entry_from_reverse(core, &cluster->cores, elem) { + if (k3_r5_core_run(core)) + dev_warn(core->dev, "core run back failed\n"); + } +out: + return ret; +} + +/* + * Internal Memory translation helper + * + * Custom function implementing the rproc .da_to_va ops to provide address + * translation (device address to kernel virtual address) for internal RAMs + * present in a DSP or IPU device). The translated addresses can be used + * either by the remoteproc core for loading, or by any rpmsg bus drivers. + */ +static void *k3_r5_rproc_da_to_va(struct rproc *rproc, u64 da, size_t len) +{ + struct k3_r5_rproc *kproc = rproc->priv; + struct k3_r5_core *core = kproc->core; + void __iomem *va = NULL; + phys_addr_t bus_addr; + u32 dev_addr, offset; + size_t size; + int i; + + if (len == 0) + return NULL; + + /* handle both R5 and SoC views of ATCM and BTCM */ + for (i = 0; i < core->num_mems; i++) { + bus_addr = core->mem[i].bus_addr; + dev_addr = core->mem[i].dev_addr; + size = core->mem[i].size; + + /* handle R5-view addresses of TCMs */ + if (da >= dev_addr && ((da + len) <= (dev_addr + size))) { + offset = da - dev_addr; + va = core->mem[i].cpu_addr + offset; + return (__force void *)va; + } + + /* handle SoC-view addresses of TCMs */ + if (da >= bus_addr && ((da + len) <= (bus_addr + size))) { + offset = da - bus_addr; + va = core->mem[i].cpu_addr + offset; + return (__force void *)va; + } + } + + /* handle static DDR reserved memory regions */ + for (i = 0; i < kproc->num_rmems; i++) { + dev_addr = kproc->rmem[i].dev_addr; + size = kproc->rmem[i].size; + + if (da >= dev_addr && ((da + len) <= (dev_addr + size))) { + offset = da - dev_addr; + va = kproc->rmem[i].cpu_addr + offset; + return (__force void *)va; + } + } + + return NULL; +} + +static const struct rproc_ops k3_r5_rproc_ops = { + .prepare = k3_r5_rproc_prepare, + .unprepare = k3_r5_rproc_unprepare, + .start = k3_r5_rproc_start, + .stop = k3_r5_rproc_stop, + .kick = k3_r5_rproc_kick, + .da_to_va = k3_r5_rproc_da_to_va, +}; + +/* + * Internal R5F Core configuration + * + * Each R5FSS has a cluster-level setting for configuring the processor + * subsystem either in a safety/fault-tolerant LockStep mode or a performance + * oriented Split mode. Each R5F core has a number of settings to either + * enable/disable each of the TCMs, control which TCM appears at the R5F core's + * address 0x0. These settings need to be configured before the resets for the + * corresponding core are released. These settings are all protected and managed + * by the System Processor. + * + * This function is used to pre-configure these settings for each R5F core, and + * the configuration is all done through various ti_sci_proc functions that + * communicate with the System Processor. The function also ensures that both + * the cores are halted before the .prepare() step. + * + * The function is called from k3_r5_cluster_rproc_init() and is invoked either + * once (in LockStep mode) or twice (in Split mode). Support for LockStep-mode + * is dictated by an eFUSE register bit, and the config settings retrieved from + * DT are adjusted accordingly as per the permitted cluster mode. All cluster + * level settings like Cluster mode and TEINIT (exception handling state + * dictating ARM or Thumb mode) can only be set and retrieved using Core0. + * + * The function behavior is different based on the cluster mode. The R5F cores + * are configured independently as per their individual settings in Split mode. + * They are identically configured in LockStep mode using the primary Core0 + * settings. However, some individual settings cannot be set in LockStep mode. + * This is overcome by switching to Split-mode initially and then programming + * both the cores with the same settings, before reconfiguing again for + * LockStep mode. + */ +static int k3_r5_rproc_configure(struct k3_r5_rproc *kproc) +{ + struct k3_r5_cluster *cluster = kproc->cluster; + struct device *dev = kproc->dev; + struct k3_r5_core *core0, *core, *temp; + u32 ctrl = 0, cfg = 0, stat = 0; + u32 set_cfg = 0, clr_cfg = 0; + u64 boot_vec = 0; + bool lockstep_en; + int ret; + + core0 = list_first_entry(&cluster->cores, struct k3_r5_core, elem); + core = (cluster->mode == CLUSTER_MODE_LOCKSTEP) ? core0 : kproc->core; + + ret = ti_sci_proc_get_status(core->tsp, &boot_vec, &cfg, &ctrl, + &stat); + if (ret < 0) + return ret; + + dev_dbg(dev, "boot_vector = 0x%llx, cfg = 0x%x ctrl = 0x%x stat = 0x%x\n", + boot_vec, cfg, ctrl, stat); + + lockstep_en = !!(stat & PROC_BOOT_STATUS_FLAG_R5_LOCKSTEP_PERMITTED); + if (!lockstep_en && cluster->mode == CLUSTER_MODE_LOCKSTEP) { + dev_err(cluster->dev, "lockstep mode not permitted, force configuring for split-mode\n"); + cluster->mode = CLUSTER_MODE_SPLIT; + } + + /* always enable ARM mode and set boot vector to 0 */ + boot_vec = 0x0; + if (core == core0) { + clr_cfg = PROC_BOOT_CFG_FLAG_R5_TEINIT; + /* + * LockStep configuration bit is Read-only on Split-mode _only_ + * devices and system firmware will NACK any requests with the + * bit configured, so program it only on permitted devices + */ + if (lockstep_en) + clr_cfg |= PROC_BOOT_CFG_FLAG_R5_LOCKSTEP; + } + + if (core->atcm_enable) + set_cfg |= PROC_BOOT_CFG_FLAG_R5_ATCM_EN; + else + clr_cfg |= PROC_BOOT_CFG_FLAG_R5_ATCM_EN; + + if (core->btcm_enable) + set_cfg |= PROC_BOOT_CFG_FLAG_R5_BTCM_EN; + else + clr_cfg |= PROC_BOOT_CFG_FLAG_R5_BTCM_EN; + + if (core->loczrama) + set_cfg |= PROC_BOOT_CFG_FLAG_R5_TCM_RSTBASE; + else + clr_cfg |= PROC_BOOT_CFG_FLAG_R5_TCM_RSTBASE; + + if (cluster->mode == CLUSTER_MODE_LOCKSTEP) { + /* + * work around system firmware limitations to make sure both + * cores are programmed symmetrically in LockStep. LockStep + * and TEINIT config is only allowed with Core0. + */ + list_for_each_entry(temp, &cluster->cores, elem) { + ret = k3_r5_core_halt(temp); + if (ret) + goto out; + + if (temp != core) { + clr_cfg &= ~PROC_BOOT_CFG_FLAG_R5_LOCKSTEP; + clr_cfg &= ~PROC_BOOT_CFG_FLAG_R5_TEINIT; + } + ret = ti_sci_proc_set_config(temp->tsp, boot_vec, + set_cfg, clr_cfg); + if (ret) + goto out; + } + + set_cfg = PROC_BOOT_CFG_FLAG_R5_LOCKSTEP; + clr_cfg = 0; + ret = ti_sci_proc_set_config(core->tsp, boot_vec, + set_cfg, clr_cfg); + } else { + ret = k3_r5_core_halt(core); + if (ret) + goto out; + + ret = ti_sci_proc_set_config(core->tsp, boot_vec, + set_cfg, clr_cfg); + } + +out: + return ret; +} + +static int k3_r5_reserved_mem_init(struct k3_r5_rproc *kproc) +{ + struct device *dev = kproc->dev; + struct device_node *np = dev_of_node(dev); + struct device_node *rmem_np; + struct reserved_mem *rmem; + int num_rmems; + int ret, i; + + num_rmems = of_property_count_elems_of_size(np, "memory-region", + sizeof(phandle)); + if (num_rmems <= 0) { + dev_err(dev, "device does not have reserved memory regions, ret = %d\n", + num_rmems); + return -EINVAL; + } + if (num_rmems < 2) { + dev_err(dev, "device needs atleast two memory regions to be defined, num = %d\n", + num_rmems); + return -EINVAL; + } + + /* use reserved memory region 0 for vring DMA allocations */ + ret = of_reserved_mem_device_init_by_idx(dev, np, 0); + if (ret) { + dev_err(dev, "device cannot initialize DMA pool, ret = %d\n", + ret); + return ret; + } + + num_rmems--; + kproc->rmem = kcalloc(num_rmems, sizeof(*kproc->rmem), GFP_KERNEL); + if (!kproc->rmem) { + ret = -ENOMEM; + goto release_rmem; + } + + /* use remaining reserved memory regions for static carveouts */ + for (i = 0; i < num_rmems; i++) { + rmem_np = of_parse_phandle(np, "memory-region", i + 1); + if (!rmem_np) { + ret = -EINVAL; + goto unmap_rmem; + } + + rmem = of_reserved_mem_lookup(rmem_np); + if (!rmem) { + of_node_put(rmem_np); + ret = -EINVAL; + goto unmap_rmem; + } + of_node_put(rmem_np); + + kproc->rmem[i].bus_addr = rmem->base; + /* + * R5Fs do not have an MMU, but have a Region Address Translator + * (RAT) module that provides a fixed entry translation between + * the 32-bit processor addresses to 64-bit bus addresses. The + * RAT is programmable only by the R5F cores. Support for RAT + * is currently not supported, so 64-bit address regions are not + * supported. The absence of MMUs implies that the R5F device + * addresses/supported memory regions are restricted to 32-bit + * bus addresses, and are identical + */ + kproc->rmem[i].dev_addr = (u32)rmem->base; + kproc->rmem[i].size = rmem->size; + kproc->rmem[i].cpu_addr = ioremap_wc(rmem->base, rmem->size); + if (!kproc->rmem[i].cpu_addr) { + dev_err(dev, "failed to map reserved memory#%d at %pa of size %pa\n", + i + 1, &rmem->base, &rmem->size); + ret = -ENOMEM; + goto unmap_rmem; + } + + dev_dbg(dev, "reserved memory%d: bus addr %pa size 0x%zx va %pK da 0x%x\n", + i + 1, &kproc->rmem[i].bus_addr, + kproc->rmem[i].size, kproc->rmem[i].cpu_addr, + kproc->rmem[i].dev_addr); + } + kproc->num_rmems = num_rmems; + + return 0; + +unmap_rmem: + for (i--; i >= 0; i--) + iounmap(kproc->rmem[i].cpu_addr); + kfree(kproc->rmem); +release_rmem: + of_reserved_mem_device_release(dev); + return ret; +} + +static void k3_r5_reserved_mem_exit(struct k3_r5_rproc *kproc) +{ + int i; + + for (i = 0; i < kproc->num_rmems; i++) + iounmap(kproc->rmem[i].cpu_addr); + kfree(kproc->rmem); + + of_reserved_mem_device_release(kproc->dev); +} + +static int k3_r5_cluster_rproc_init(struct platform_device *pdev) +{ + struct k3_r5_cluster *cluster = platform_get_drvdata(pdev); + struct device *dev = &pdev->dev; + struct k3_r5_rproc *kproc; + struct k3_r5_core *core, *core1; + struct device *cdev; + const char *fw_name; + struct rproc *rproc; + int ret; + + core1 = list_last_entry(&cluster->cores, struct k3_r5_core, elem); + list_for_each_entry(core, &cluster->cores, elem) { + cdev = core->dev; + ret = rproc_of_parse_firmware(cdev, 0, &fw_name); + if (ret) { + dev_err(dev, "failed to parse firmware-name property, ret = %d\n", + ret); + goto out; + } + + rproc = rproc_alloc(cdev, dev_name(cdev), &k3_r5_rproc_ops, + fw_name, sizeof(*kproc)); + if (!rproc) { + ret = -ENOMEM; + goto out; + } + + /* K3 R5s have a Region Address Translator (RAT) but no MMU */ + rproc->has_iommu = false; + /* error recovery is not supported at present */ + rproc->recovery_disabled = true; + + kproc = rproc->priv; + kproc->cluster = cluster; + kproc->core = core; + kproc->dev = cdev; + kproc->rproc = rproc; + core->rproc = rproc; + + ret = k3_r5_rproc_configure(kproc); + if (ret) { + dev_err(dev, "initial configure failed, ret = %d\n", + ret); + goto err_config; + } + + ret = k3_r5_reserved_mem_init(kproc); + if (ret) { + dev_err(dev, "reserved memory init failed, ret = %d\n", + ret); + goto err_config; + } + + ret = rproc_add(rproc); + if (ret) { + dev_err(dev, "rproc_add failed, ret = %d\n", ret); + goto err_add; + } + + /* create only one rproc in lockstep mode */ + if (cluster->mode == CLUSTER_MODE_LOCKSTEP) + break; + } + + return 0; + +err_split: + rproc_del(rproc); +err_add: + k3_r5_reserved_mem_exit(kproc); +err_config: + rproc_free(rproc); + core->rproc = NULL; +out: + /* undo core0 upon any failures on core1 in split-mode */ + if (cluster->mode == CLUSTER_MODE_SPLIT && core == core1) { + core = list_prev_entry(core, elem); + rproc = core->rproc; + kproc = rproc->priv; + goto err_split; + } + return ret; +} + +static int k3_r5_cluster_rproc_exit(struct platform_device *pdev) +{ + struct k3_r5_cluster *cluster = platform_get_drvdata(pdev); + struct k3_r5_rproc *kproc; + struct k3_r5_core *core; + struct rproc *rproc; + + /* + * lockstep mode has only one rproc associated with first core, whereas + * split-mode has two rprocs associated with each core, and requires + * that core1 be powered down first + */ + core = (cluster->mode == CLUSTER_MODE_LOCKSTEP) ? + list_first_entry(&cluster->cores, struct k3_r5_core, elem) : + list_last_entry(&cluster->cores, struct k3_r5_core, elem); + + list_for_each_entry_from_reverse(core, &cluster->cores, elem) { + rproc = core->rproc; + kproc = rproc->priv; + + rproc_del(rproc); + + k3_r5_reserved_mem_exit(kproc); + + rproc_free(rproc); + core->rproc = NULL; + } + + return 0; +} + +static int k3_r5_core_of_get_internal_memories(struct platform_device *pdev, + struct k3_r5_core *core) +{ + static const char * const mem_names[] = {"atcm", "btcm"}; + struct device *dev = &pdev->dev; + struct resource *res; + int num_mems; + int i; + + num_mems = ARRAY_SIZE(mem_names); + core->mem = devm_kcalloc(dev, num_mems, sizeof(*core->mem), GFP_KERNEL); + if (!core->mem) + return -ENOMEM; + + for (i = 0; i < num_mems; i++) { + res = platform_get_resource_byname(pdev, IORESOURCE_MEM, + mem_names[i]); + if (!res) { + dev_err(dev, "found no memory resource for %s\n", + mem_names[i]); + return -EINVAL; + } + if (!devm_request_mem_region(dev, res->start, + resource_size(res), + dev_name(dev))) { + dev_err(dev, "could not request %s region for resource\n", + mem_names[i]); + return -EBUSY; + } + + /* + * TCMs are designed in general to support RAM-like backing + * memories. So, map these as Normal Non-Cached memories. This + * also avoids/fixes any potential alignment faults due to + * unaligned data accesses when using memcpy() or memset() + * functions (normally seen with device type memory). + */ + core->mem[i].cpu_addr = devm_ioremap_wc(dev, res->start, + resource_size(res)); + if (!core->mem[i].cpu_addr) { + dev_err(dev, "failed to map %s memory\n", mem_names[i]); + return -ENOMEM; + } + core->mem[i].bus_addr = res->start; + + /* + * TODO: + * The R5F cores can place ATCM & BTCM anywhere in its address + * based on the corresponding Region Registers in the System + * Control coprocessor. For now, place ATCM and BTCM at + * addresses 0 and 0x41010000 (same as the bus address on AM65x + * SoCs) based on loczrama setting + */ + if (!strcmp(mem_names[i], "atcm")) { + core->mem[i].dev_addr = core->loczrama ? + 0 : K3_R5_TCM_DEV_ADDR; + } else { + core->mem[i].dev_addr = core->loczrama ? + K3_R5_TCM_DEV_ADDR : 0; + } + core->mem[i].size = resource_size(res); + + dev_dbg(dev, "memory %5s: bus addr %pa size 0x%zx va %pK da 0x%x\n", + mem_names[i], &core->mem[i].bus_addr, + core->mem[i].size, core->mem[i].cpu_addr, + core->mem[i].dev_addr); + } + core->num_mems = num_mems; + + return 0; +} + +static +struct ti_sci_proc *k3_r5_core_of_get_tsp(struct device *dev, + const struct ti_sci_handle *sci) +{ + struct ti_sci_proc *tsp; + u32 temp[2]; + int ret; + + ret = of_property_read_u32_array(dev_of_node(dev), "ti,sci-proc-ids", + temp, 2); + if (ret < 0) + return ERR_PTR(ret); + + tsp = devm_kzalloc(dev, sizeof(*tsp), GFP_KERNEL); + if (!tsp) + return ERR_PTR(-ENOMEM); + + tsp->dev = dev; + tsp->sci = sci; + tsp->ops = &sci->ops.proc_ops; + tsp->proc_id = temp[0]; + tsp->host_id = temp[1]; + + return tsp; +} + +static int k3_r5_core_of_init(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct device_node *np = dev_of_node(dev); + struct k3_r5_core *core; + int ret; + + if (!devres_open_group(dev, k3_r5_core_of_init, GFP_KERNEL)) + return -ENOMEM; + + core = devm_kzalloc(dev, sizeof(*core), GFP_KERNEL); + if (!core) { + ret = -ENOMEM; + goto err; + } + + core->dev = dev; + /* + * Use SoC Power-on-Reset values as default if no DT properties are + * used to dictate the TCM configurations + */ + core->atcm_enable = 0; + core->btcm_enable = 1; + core->loczrama = 1; + + ret = of_property_read_u32(np, "ti,atcm-enable", &core->atcm_enable); + if (ret < 0 && ret != -EINVAL) { + dev_err(dev, "invalid format for ti,atcm-enable, ret = %d\n", + ret); + goto err; + } + + ret = of_property_read_u32(np, "ti,btcm-enable", &core->btcm_enable); + if (ret < 0 && ret != -EINVAL) { + dev_err(dev, "invalid format for ti,btcm-enable, ret = %d\n", + ret); + goto err; + } + + ret = of_property_read_u32(np, "ti,loczrama", &core->loczrama); + if (ret < 0 && ret != -EINVAL) { + dev_err(dev, "invalid format for ti,loczrama, ret = %d\n", ret); + goto err; + } + + core->ti_sci = devm_ti_sci_get_by_phandle(dev, "ti,sci"); + if (IS_ERR(core->ti_sci)) { + ret = PTR_ERR(core->ti_sci); + if (ret != -EPROBE_DEFER) { + dev_err(dev, "failed to get ti-sci handle, ret = %d\n", + ret); + } + core->ti_sci = NULL; + goto err; + } + + ret = of_property_read_u32(np, "ti,sci-dev-id", &core->ti_sci_id); + if (ret) { + dev_err(dev, "missing 'ti,sci-dev-id' property\n"); + goto err; + } + + core->reset = devm_reset_control_get_exclusive(dev, NULL); + if (IS_ERR_OR_NULL(core->reset)) { + ret = PTR_ERR_OR_ZERO(core->reset); + if (!ret) + ret = -ENODEV; + if (ret != -EPROBE_DEFER) { + dev_err(dev, "failed to get reset handle, ret = %d\n", + ret); + } + goto err; + } + + core->tsp = k3_r5_core_of_get_tsp(dev, core->ti_sci); + if (IS_ERR(core->tsp)) { + dev_err(dev, "failed to construct ti-sci proc control, ret = %d\n", + ret); + ret = PTR_ERR(core->tsp); + goto err; + } + + ret = k3_r5_core_of_get_internal_memories(pdev, core); + if (ret) { + dev_err(dev, "failed to get internal memories, ret = %d\n", + ret); + goto err; + } + + ret = ti_sci_proc_request(core->tsp); + if (ret < 0) { + dev_err(dev, "ti_sci_proc_request failed, ret = %d\n", ret); + goto err; + } + + platform_set_drvdata(pdev, core); + devres_close_group(dev, k3_r5_core_of_init); + + return 0; + +err: + devres_release_group(dev, k3_r5_core_of_init); + return ret; +} + +/* + * free the resources explicitly since driver model is not being used + * for the child R5F devices + */ +static void k3_r5_core_of_exit(struct platform_device *pdev) +{ + struct k3_r5_core *core = platform_get_drvdata(pdev); + struct device *dev = &pdev->dev; + int ret; + + ret = ti_sci_proc_release(core->tsp); + if (ret) + dev_err(dev, "failed to release proc, ret = %d\n", ret); + + platform_set_drvdata(pdev, NULL); + devres_release_group(dev, k3_r5_core_of_init); +} + +static void k3_r5_cluster_of_exit(struct platform_device *pdev) +{ + struct k3_r5_cluster *cluster = platform_get_drvdata(pdev); + struct platform_device *cpdev; + struct k3_r5_core *core, *temp; + + list_for_each_entry_safe_reverse(core, temp, &cluster->cores, elem) { + list_del(&core->elem); + cpdev = to_platform_device(core->dev); + k3_r5_core_of_exit(cpdev); + } +} + +static int k3_r5_cluster_of_init(struct platform_device *pdev) +{ + struct k3_r5_cluster *cluster = platform_get_drvdata(pdev); + struct device *dev = &pdev->dev; + struct device_node *np = dev_of_node(dev); + struct platform_device *cpdev; + struct device_node *child; + struct k3_r5_core *core; + int ret; + + for_each_available_child_of_node(np, child) { + cpdev = of_find_device_by_node(child); + if (!cpdev) { + ret = -ENODEV; + dev_err(dev, "could not get R5 core platform device\n"); + goto fail; + } + + ret = k3_r5_core_of_init(cpdev); + if (ret) { + dev_err(dev, "k3_r5_core_of_init failed, ret = %d\n", + ret); + put_device(&cpdev->dev); + goto fail; + } + + core = platform_get_drvdata(cpdev); + put_device(&cpdev->dev); + list_add_tail(&core->elem, &cluster->cores); + } + + return 0; + +fail: + k3_r5_cluster_of_exit(pdev); + return ret; +} + +static int k3_r5_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct device_node *np = dev_of_node(dev); + struct k3_r5_cluster *cluster; + int ret; + int num_cores; + + cluster = devm_kzalloc(dev, sizeof(*cluster), GFP_KERNEL); + if (!cluster) + return -ENOMEM; + + cluster->dev = dev; + cluster->mode = CLUSTER_MODE_LOCKSTEP; + INIT_LIST_HEAD(&cluster->cores); + + ret = of_property_read_u32(np, "ti,cluster-mode", &cluster->mode); + if (ret < 0 && ret != -EINVAL) { + dev_err(dev, "invalid format for ti,cluster-mode, ret = %d\n", + ret); + return ret; + } + + num_cores = of_get_available_child_count(np); + if (num_cores != 2) { + dev_err(dev, "MCU cluster requires both R5F cores to be enabled, num_cores = %d\n", + num_cores); + return -ENODEV; + } + + platform_set_drvdata(pdev, cluster); + + ret = devm_of_platform_populate(dev); + if (ret) { + dev_err(dev, "devm_of_platform_populate failed, ret = %d\n", + ret); + return ret; + } + + ret = k3_r5_cluster_of_init(pdev); + if (ret) { + dev_err(dev, "k3_r5_cluster_of_init failed, ret = %d\n", ret); + return ret; + } + + ret = devm_add_action_or_reset(dev, + (void(*)(void *))k3_r5_cluster_of_exit, + pdev); + if (ret) + return ret; + + ret = k3_r5_cluster_rproc_init(pdev); + if (ret) { + dev_err(dev, "k3_r5_cluster_rproc_init failed, ret = %d\n", + ret); + return ret; + } + + ret = devm_add_action_or_reset(dev, + (void(*)(void *))k3_r5_cluster_rproc_exit, + pdev); + if (ret) + return ret; + + return 0; +} + +static const struct of_device_id k3_r5_of_match[] = { + { .compatible = "ti,am654-r5fss", }, + { .compatible = "ti,j721e-r5fss", }, + { /* sentinel */ }, +}; +MODULE_DEVICE_TABLE(of, k3_r5_of_match); + +static struct platform_driver k3_r5_rproc_driver = { + .probe = k3_r5_probe, + .driver = { + .name = "k3_r5_rproc", + .of_match_table = k3_r5_of_match, + }, +}; + +module_platform_driver(k3_r5_rproc_driver); + +MODULE_LICENSE("GPL v2"); +MODULE_DESCRIPTION("TI K3 R5F remote processor driver"); +MODULE_AUTHOR("Suman Anna "); From patchwork Tue Sep 8 17:45:55 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Suman Anna X-Patchwork-Id: 11763789 Return-Path: Received: from mail.kernel.org (pdx-korg-mail-1.web.codeaurora.org [172.30.200.123]) by pdx-korg-patchwork-2.web.codeaurora.org (Postfix) with ESMTP id 6DE6213B1 for ; Tue, 8 Sep 2020 17:46:46 +0000 (UTC) Received: from merlin.infradead.org (merlin.infradead.org [205.233.59.134]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by mail.kernel.org (Postfix) with ESMTPS id 3BA2C2064B for ; Tue, 8 Sep 2020 17:46:46 +0000 (UTC) Authentication-Results: mail.kernel.org; dkim=pass (2048-bit key) header.d=lists.infradead.org header.i=@lists.infradead.org header.b="kCnpxrXR"; dkim=fail reason="signature verification failed" (1024-bit key) header.d=ti.com header.i=@ti.com header.b="TAm9rNPt" DMARC-Filter: OpenDMARC Filter v1.3.2 mail.kernel.org 3BA2C2064B Authentication-Results: mail.kernel.org; dmarc=fail (p=quarantine dis=none) header.from=ti.com Authentication-Results: mail.kernel.org; spf=none smtp.mailfrom=linux-arm-kernel-bounces+patchwork-linux-arm=patchwork.kernel.org@lists.infradead.org DKIM-Signature: v=1; a=rsa-sha256; q=dns/txt; c=relaxed/relaxed; d=lists.infradead.org; s=merlin.20170209; h=Sender:Content-Transfer-Encoding: Content-Type:Cc:List-Subscribe:List-Help:List-Post:List-Archive: List-Unsubscribe:List-Id:MIME-Version:References:In-Reply-To:Message-ID:Date: Subject:To:From:Reply-To:Content-ID:Content-Description:Resent-Date: Resent-From:Resent-Sender:Resent-To:Resent-Cc:Resent-Message-ID:List-Owner; bh=UbZJRrEiWR7ONMy5hYfTeIwZhEQqQ93mB/oBYViMKjI=; b=kCnpxrXR5O+sbWpDnKCTRX819 ZgvcxGtdBg9F88OfTWGR464H58Vnpj3hIlLGgJI0PZvX3x6Em1hElwLjCIOwqnCAKZ0oWE+iAiy7j N+rfAUQKqPpyTBi0mrfep7WypLuhcAO7TvUYI/ST+i0R49FucL/0nu2gtIuzsJglA90gLgNX0105S u0h/mTSySoVeAXEB5+fdES+sfAzVjvV3yjL48VHv70BZh/dwKUmYoXU4I3Mvkx9X3cdhxgmQbxuh5 Unqj+UWY9HMfTDtPaopMIIXSNBmdrra17vQWT1ofK5fHW/78aIi1pbfQz4xSpmseaRKLH133z3kGW RnaQ2vuZQ==; Received: from localhost ([::1] helo=merlin.infradead.org) by merlin.infradead.org with esmtp (Exim 4.92.3 #3 (Red Hat Linux)) id 1kFhhU-0007k4-7j; Tue, 08 Sep 2020 17:46:36 +0000 Received: from lelv0143.ext.ti.com ([198.47.23.248]) by merlin.infradead.org with esmtps (Exim 4.92.3 #3 (Red Hat Linux)) id 1kFhhP-0007iD-1J for linux-arm-kernel@lists.infradead.org; Tue, 08 Sep 2020 17:46:32 +0000 Received: from lelv0266.itg.ti.com ([10.180.67.225]) by lelv0143.ext.ti.com (8.15.2/8.15.2) with ESMTP id 088HkSt7016356; Tue, 8 Sep 2020 12:46:28 -0500 DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=ti.com; s=ti-com-17Q1; t=1599587188; bh=FK1CokiSYiGRZpmJHyo0T17KAISKb7OLKtCZBceTxYc=; h=From:To:CC:Subject:Date:In-Reply-To:References; b=TAm9rNPtsPEGQibx14WMdoYDmsMFs71HRsMHjI8PhiO27aViThRLeNCPTlng8mWhE /mUldY5929UEoFbUHeR7R2vnDjklzkjxMB8ja8FUrCXNiJTrl5Ls77QCefwq7zxwYA U9JvYM6OlVtydz2qrJFinsUULimEo901a1x3Ebu4= Received: from DFLE115.ent.ti.com (dfle115.ent.ti.com [10.64.6.36]) by lelv0266.itg.ti.com (8.15.2/8.15.2) with ESMTPS id 088HkSRv099386 (version=TLSv1.2 cipher=AES256-GCM-SHA384 bits=256 verify=FAIL); Tue, 8 Sep 2020 12:46:28 -0500 Received: from DFLE114.ent.ti.com (10.64.6.35) by DFLE115.ent.ti.com (10.64.6.36) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA256_P256) id 15.1.1979.3; Tue, 8 Sep 2020 12:46:27 -0500 Received: from lelv0327.itg.ti.com (10.180.67.183) by DFLE114.ent.ti.com (10.64.6.35) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA256_P256) id 15.1.1979.3 via Frontend Transport; Tue, 8 Sep 2020 12:46:27 -0500 Received: from lelv0597.itg.ti.com (lelv0597.itg.ti.com [10.181.64.32]) by lelv0327.itg.ti.com (8.15.2/8.15.2) with ESMTP id 088HkRSu116091; Tue, 8 Sep 2020 12:46:27 -0500 Received: from localhost ([10.250.34.59]) by lelv0597.itg.ti.com (8.14.7/8.14.7) with ESMTP id 088HkRY0040375; Tue, 8 Sep 2020 12:46:27 -0500 From: Suman Anna To: Bjorn Andersson , Rob Herring , Mathieu Poirier Subject: [PATCH v4 3/4] remoteproc: k3-r5: Initialize TCM memories for ECC Date: Tue, 8 Sep 2020 12:45:55 -0500 Message-ID: <20200908174556.21277-4-s-anna@ti.com> X-Mailer: git-send-email 2.28.0 In-Reply-To: <20200908174556.21277-1-s-anna@ti.com> References: <20200908174556.21277-1-s-anna@ti.com> MIME-Version: 1.0 X-EXCLAIMER-MD-CONFIG: e1e8a2fd-e40a-4ac6-ac9b-f7e9cc9ee180 X-CRM114-Version: 20100106-BlameMichelson ( TRE 0.8.0 (BSD) ) MR-646709E3 X-CRM114-CacheID: sfid-20200908_134631_201688_12813AEE X-CRM114-Status: GOOD ( 16.09 ) X-Spam-Score: -2.5 (--) X-Spam-Report: SpamAssassin version 3.4.4 on merlin.infradead.org summary: Content analysis details: (-2.5 points) pts rule name description ---- ---------------------- -------------------------------------------------- -2.3 RCVD_IN_DNSWL_MED RBL: Sender listed at https://www.dnswl.org/, medium trust [198.47.23.248 listed in list.dnswl.org] 0.0 SPF_HELO_NONE SPF: HELO does not publish an SPF Record -0.0 SPF_PASS SPF: sender matches SPF record 0.1 DKIM_SIGNED Message has a DKIM or DK signature, not necessarily valid -0.1 DKIM_VALID Message has at least one valid DKIM or DK signature -0.1 DKIM_VALID_AU Message has a valid DKIM or DK signature from author's domain -0.1 DKIM_VALID_EF Message has a valid DKIM or DK signature from envelope-from domain -0.0 DKIMWL_WL_HIGH DKIMwl.org - Whitelisted High sender X-BeenThere: linux-arm-kernel@lists.infradead.org X-Mailman-Version: 2.1.29 Precedence: list List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Cc: devicetree@vger.kernel.org, Lokesh Vutla , linux-remoteproc@vger.kernel.org, linux-kernel@vger.kernel.org, linux-arm-kernel@lists.infradead.org Sender: "linux-arm-kernel" Errors-To: linux-arm-kernel-bounces+patchwork-linux-arm=patchwork.kernel.org@lists.infradead.org The R5F processors on K3 SoCs all have two TCMs (ATCM and BTCM) that support 32-bit ECC. The TCMs are typically loaded with some boot-up code to initialize the R5 MPUs to further execute code out of DDR. The ECC for the TCMs is enabled by default on K3 SoCs due to internal default tie-off values, but the TCM memories are not initialized on device power up. Any read access without the corresponding TCM memory location initialized will generate an ECC error, and any such access from a A72 or A53 core will trigger a SError. So, zero initialize both the TCM memories before loading any firmware onto a R5F in remoteproc mode. Any R5F booted from U-Boot/SPL would require a similar initialization in the bootloader. Note that both the TCMs are initialized unconditionally as the TCM enable config bits only manage the access and visibility from R5. Signed-off-by: Suman Anna Reviewed-by: Mathieu Poirier --- v4: No changes v3: https://patchwork.kernel.org/patch/11679335/ - No code changes, picked up tags v2: https://patchwork.kernel.org/patch/11632989/ v1: https://patchwork.kernel.org/patch/11456371/ drivers/remoteproc/ti_k3_r5_remoteproc.c | 17 +++++++++++++++-- 1 file changed, 15 insertions(+), 2 deletions(-) diff --git a/drivers/remoteproc/ti_k3_r5_remoteproc.c b/drivers/remoteproc/ti_k3_r5_remoteproc.c index 15e52ea67bbe..a6b395ab47b6 100644 --- a/drivers/remoteproc/ti_k3_r5_remoteproc.c +++ b/drivers/remoteproc/ti_k3_r5_remoteproc.c @@ -362,11 +362,24 @@ static int k3_r5_rproc_prepare(struct rproc *rproc) ret = (cluster->mode == CLUSTER_MODE_LOCKSTEP) ? k3_r5_lockstep_release(cluster) : k3_r5_split_release(core); - if (ret) + if (ret) { dev_err(dev, "unable to enable cores for TCM loading, ret = %d\n", ret); + return ret; + } - return ret; + /* + * Zero out both TCMs unconditionally (access from v8 Arm core is not + * affected by ATCM & BTCM enable configuration values) so that ECC + * can be effective on all TCM addresses. + */ + dev_dbg(dev, "zeroing out ATCM memory\n"); + memset(core->mem[0].cpu_addr, 0x00, core->mem[0].size); + + dev_dbg(dev, "zeroing out BTCM memory\n"); + memset(core->mem[1].cpu_addr, 0x00, core->mem[1].size); + + return 0; } /* From patchwork Tue Sep 8 17:45:56 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Suman Anna X-Patchwork-Id: 11763793 Return-Path: Received: from mail.kernel.org (pdx-korg-mail-1.web.codeaurora.org [172.30.200.123]) by pdx-korg-patchwork-2.web.codeaurora.org (Postfix) with ESMTP id AA09815E4 for ; Tue, 8 Sep 2020 17:46:52 +0000 (UTC) Received: from merlin.infradead.org (merlin.infradead.org [205.233.59.134]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by mail.kernel.org (Postfix) with ESMTPS id 78D9C2064B for ; Tue, 8 Sep 2020 17:46:52 +0000 (UTC) Authentication-Results: mail.kernel.org; dkim=pass (2048-bit key) header.d=lists.infradead.org header.i=@lists.infradead.org header.b="HL0gA8GZ"; dkim=fail reason="signature verification failed" (1024-bit key) header.d=ti.com header.i=@ti.com header.b="wBvsHrnD" DMARC-Filter: OpenDMARC Filter v1.3.2 mail.kernel.org 78D9C2064B Authentication-Results: mail.kernel.org; dmarc=fail (p=quarantine dis=none) header.from=ti.com Authentication-Results: mail.kernel.org; spf=none smtp.mailfrom=linux-arm-kernel-bounces+patchwork-linux-arm=patchwork.kernel.org@lists.infradead.org DKIM-Signature: v=1; a=rsa-sha256; q=dns/txt; c=relaxed/relaxed; d=lists.infradead.org; s=merlin.20170209; h=Sender:Content-Transfer-Encoding: Content-Type:Cc:List-Subscribe:List-Help:List-Post:List-Archive: List-Unsubscribe:List-Id:MIME-Version:References:In-Reply-To:Message-ID:Date: Subject:To:From:Reply-To:Content-ID:Content-Description:Resent-Date: Resent-From:Resent-Sender:Resent-To:Resent-Cc:Resent-Message-ID:List-Owner; bh=53X9iJEUHPLOhxME7O5iB3HR04OAKQ4cfwX6GpNYzaA=; b=HL0gA8GZOK42OjxCPGtDZwRAj jrL9m/CIFbhnDPZXImLa5wDI8Ce+ZytKeX0E0Vhp7ltJ3SfTbkfH0VV/SEAm9lyNOeLfjuw7gkSSa U4MF84OVrHUSpYbQKRBv2vQN7HvyIr/x+PVsxU9b9Fj0hOeKaxGsNo24hcwHaCZAdTof9FXtqQ4wG 9dh87soye9XDoHtlryPs4tbEX43sLi5XZ8bSYpRSPKflEaTjdZTJUukMtdJ71ykhkIeheeJHRW6Qm Ly3zQJceruct4AMzUaHzIBMlfWK0SGSMyP8izNEDIEY1r75YAbX6ngs9fQcendr1XCU3pYXEBJ2uy l7Q0rfkbA==; Received: from localhost ([::1] helo=merlin.infradead.org) by merlin.infradead.org with esmtp (Exim 4.92.3 #3 (Red Hat Linux)) id 1kFhhZ-0007mG-RO; Tue, 08 Sep 2020 17:46:41 +0000 Received: from fllv0015.ext.ti.com ([198.47.19.141]) by merlin.infradead.org with esmtps (Exim 4.92.3 #3 (Red Hat Linux)) id 1kFhhV-0007kP-AV for linux-arm-kernel@lists.infradead.org; Tue, 08 Sep 2020 17:46:38 +0000 Received: from fllv0035.itg.ti.com ([10.64.41.0]) by fllv0015.ext.ti.com (8.15.2/8.15.2) with ESMTP id 088HkZkZ119442; Tue, 8 Sep 2020 12:46:35 -0500 DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=ti.com; s=ti-com-17Q1; t=1599587195; bh=pVNv1GoNjSmG+5ca2Hx2Q08E/omijdPc4/XHB2AvMIg=; h=From:To:CC:Subject:Date:In-Reply-To:References; b=wBvsHrnDiQW5Wf3J0WFf0gCoX/OoCgO620ECCnNndB380eC4hvJI1n1NcO+I2V4E7 8L6EB2IXGv1qBGNV7Nrul5igBFdMSccoMX4XH8el0FXL5bX0xy92wO+wLprClcXUW2 T22vWYy9S5CCQTmg+r474pFF35zq6+BXEsNZD0XM= Received: from DFLE102.ent.ti.com (dfle102.ent.ti.com [10.64.6.23]) by fllv0035.itg.ti.com (8.15.2/8.15.2) with ESMTP id 088HkZOC055183; Tue, 8 Sep 2020 12:46:35 -0500 Received: from DFLE100.ent.ti.com (10.64.6.21) by DFLE102.ent.ti.com (10.64.6.23) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA256_P256) id 15.1.1979.3; Tue, 8 Sep 2020 12:46:34 -0500 Received: from fllv0039.itg.ti.com (10.64.41.19) by DFLE100.ent.ti.com (10.64.6.21) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA256_P256) id 15.1.1979.3 via Frontend Transport; Tue, 8 Sep 2020 12:46:34 -0500 Received: from lelv0597.itg.ti.com (lelv0597.itg.ti.com [10.181.64.32]) by fllv0039.itg.ti.com (8.15.2/8.15.2) with ESMTP id 088HkYIL105413; Tue, 8 Sep 2020 12:46:34 -0500 Received: from localhost ([10.250.34.59]) by lelv0597.itg.ti.com (8.14.7/8.14.7) with ESMTP id 088HkYP5040390; Tue, 8 Sep 2020 12:46:34 -0500 From: Suman Anna To: Bjorn Andersson , Rob Herring , Mathieu Poirier Subject: [PATCH v4 4/4] remoteproc: k3-r5: Add loading support for on-chip SRAM regions Date: Tue, 8 Sep 2020 12:45:56 -0500 Message-ID: <20200908174556.21277-5-s-anna@ti.com> X-Mailer: git-send-email 2.28.0 In-Reply-To: <20200908174556.21277-1-s-anna@ti.com> References: <20200908174556.21277-1-s-anna@ti.com> MIME-Version: 1.0 X-EXCLAIMER-MD-CONFIG: e1e8a2fd-e40a-4ac6-ac9b-f7e9cc9ee180 X-CRM114-Version: 20100106-BlameMichelson ( TRE 0.8.0 (BSD) ) MR-646709E3 X-CRM114-CacheID: sfid-20200908_134637_504170_7414AB48 X-CRM114-Status: GOOD ( 21.04 ) X-Spam-Score: -2.5 (--) X-Spam-Report: SpamAssassin version 3.4.4 on merlin.infradead.org summary: Content analysis details: (-2.5 points) pts rule name description ---- ---------------------- -------------------------------------------------- -2.3 RCVD_IN_DNSWL_MED RBL: Sender listed at https://www.dnswl.org/, medium trust [198.47.19.141 listed in list.dnswl.org] 0.0 SPF_HELO_NONE SPF: HELO does not publish an SPF Record -0.0 SPF_PASS SPF: sender matches SPF record 0.1 DKIM_SIGNED Message has a DKIM or DK signature, not necessarily valid -0.1 DKIM_VALID Message has at least one valid DKIM or DK signature -0.1 DKIM_VALID_AU Message has a valid DKIM or DK signature from author's domain -0.1 DKIM_VALID_EF Message has a valid DKIM or DK signature from envelope-from domain -0.0 DKIMWL_WL_HIGH DKIMwl.org - Whitelisted High sender X-BeenThere: linux-arm-kernel@lists.infradead.org X-Mailman-Version: 2.1.29 Precedence: list List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Cc: devicetree@vger.kernel.org, Lokesh Vutla , linux-remoteproc@vger.kernel.org, linux-kernel@vger.kernel.org, linux-arm-kernel@lists.infradead.org Sender: "linux-arm-kernel" Errors-To: linux-arm-kernel-bounces+patchwork-linux-arm=patchwork.kernel.org@lists.infradead.org The K3 SoCs has various internal on-chip SRAM memories like the SRAM within the MCU domain or the shared MSMC RAM within NavSS that can be used for multiple purposes. One such purpose is to have the R5F cores use a portion of such on-chip SRAM for fast-access data or to directly execute code. Add support to the K3 R5 remoteproc driver to parse and support loading into such memories. The SRAM regions need to be mapped as normal non-cacheable memory to avoid kernel crashes when the remoteproc loader code uses the Arm64 memset library function (the "DC ZVA" instruction throws a alignment fault on device type memory). These SRAM regions are completely optional as not all firmware images require these memories, and any such memory has to be reserved as such in the DTS files. Signed-off-by: Suman Anna Reviewed-by: Mathieu Poirier --- v4: No changes v3: https://patchwork.kernel.org/patch/11679329/ - No code changes, picked up review tags v2: https://patchwork.kernel.org/patch/11632991/ v1: https://patchwork.kernel.org/patch/11456373/ drivers/remoteproc/ti_k3_r5_remoteproc.c | 79 ++++++++++++++++++++++++ 1 file changed, 79 insertions(+) diff --git a/drivers/remoteproc/ti_k3_r5_remoteproc.c b/drivers/remoteproc/ti_k3_r5_remoteproc.c index a6b395ab47b6..d9307935441d 100644 --- a/drivers/remoteproc/ti_k3_r5_remoteproc.c +++ b/drivers/remoteproc/ti_k3_r5_remoteproc.c @@ -85,7 +85,9 @@ struct k3_r5_cluster { * @dev: cached device pointer * @rproc: rproc handle representing this core * @mem: internal memory regions data + * @sram: on-chip SRAM memory regions data * @num_mems: number of internal memory regions + * @num_sram: number of on-chip SRAM memory regions * @reset: reset control handle * @tsp: TI-SCI processor control handle * @ti_sci: TI-SCI handle @@ -99,7 +101,9 @@ struct k3_r5_core { struct device *dev; struct rproc *rproc; struct k3_r5_mem *mem; + struct k3_r5_mem *sram; int num_mems; + int num_sram; struct reset_control *reset; struct ti_sci_proc *tsp; const struct ti_sci_handle *ti_sci; @@ -587,6 +591,18 @@ static void *k3_r5_rproc_da_to_va(struct rproc *rproc, u64 da, size_t len) } } + /* handle any SRAM regions using SoC-view addresses */ + for (i = 0; i < core->num_sram; i++) { + dev_addr = core->sram[i].dev_addr; + size = core->sram[i].size; + + if (da >= dev_addr && ((da + len) <= (dev_addr + size))) { + offset = da - dev_addr; + va = core->sram[i].cpu_addr + offset; + return (__force void *)va; + } + } + /* handle static DDR reserved memory regions */ for (i = 0; i < kproc->num_rmems; i++) { dev_addr = kproc->rmem[i].dev_addr; @@ -1027,6 +1043,63 @@ static int k3_r5_core_of_get_internal_memories(struct platform_device *pdev, return 0; } +static int k3_r5_core_of_get_sram_memories(struct platform_device *pdev, + struct k3_r5_core *core) +{ + struct device_node *np = pdev->dev.of_node; + struct device *dev = &pdev->dev; + struct device_node *sram_np; + struct resource res; + int num_sram; + int i, ret; + + num_sram = of_property_count_elems_of_size(np, "sram", sizeof(phandle)); + if (num_sram <= 0) { + dev_dbg(dev, "device does not use reserved on-chip memories, num_sram = %d\n", + num_sram); + return 0; + } + + core->sram = devm_kcalloc(dev, num_sram, sizeof(*core->sram), GFP_KERNEL); + if (!core->sram) + return -ENOMEM; + + for (i = 0; i < num_sram; i++) { + sram_np = of_parse_phandle(np, "sram", i); + if (!sram_np) + return -EINVAL; + + if (!of_device_is_available(sram_np)) { + of_node_put(sram_np); + return -EINVAL; + } + + ret = of_address_to_resource(sram_np, 0, &res); + of_node_put(sram_np); + if (ret) + return -EINVAL; + + core->sram[i].bus_addr = res.start; + core->sram[i].dev_addr = res.start; + core->sram[i].size = resource_size(&res); + core->sram[i].cpu_addr = devm_ioremap_wc(dev, res.start, + resource_size(&res)); + if (!core->sram[i].cpu_addr) { + dev_err(dev, "failed to parse and map sram%d memory at %pad\n", + i, &res.start); + return -ENOMEM; + } + + dev_dbg(dev, "memory sram%d: bus addr %pa size 0x%zx va %pK da 0x%x\n", + i, &core->sram[i].bus_addr, + core->sram[i].size, core->sram[i].cpu_addr, + core->sram[i].dev_addr); + } + core->num_sram = num_sram; + + return 0; +} + static struct ti_sci_proc *k3_r5_core_of_get_tsp(struct device *dev, const struct ti_sci_handle *sci) @@ -1142,6 +1215,12 @@ static int k3_r5_core_of_init(struct platform_device *pdev) goto err; } + ret = k3_r5_core_of_get_sram_memories(pdev, core); + if (ret) { + dev_err(dev, "failed to get sram memories, ret = %d\n", ret); + goto err; + } + ret = ti_sci_proc_request(core->tsp); if (ret < 0) { dev_err(dev, "ti_sci_proc_request failed, ret = %d\n", ret);