From patchwork Mon Sep 14 21:43:29 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Michael Walle X-Patchwork-Id: 11774969 Return-Path: Received: from mail.kernel.org (pdx-korg-mail-1.web.codeaurora.org [172.30.200.123]) by pdx-korg-patchwork-2.web.codeaurora.org (Postfix) with ESMTP id B25F3618 for ; Mon, 14 Sep 2020 21:44:37 +0000 (UTC) Received: from merlin.infradead.org (merlin.infradead.org [205.233.59.134]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by mail.kernel.org (Postfix) with ESMTPS id 7E48320759 for ; Mon, 14 Sep 2020 21:44:37 +0000 (UTC) Authentication-Results: mail.kernel.org; dkim=pass (2048-bit key) header.d=lists.infradead.org header.i=@lists.infradead.org header.b="BhE+UXnD"; dkim=fail reason="signature verification failed" (1024-bit key) header.d=walle.cc header.i=@walle.cc header.b="Vq5JMhrW" DMARC-Filter: OpenDMARC Filter v1.3.2 mail.kernel.org 7E48320759 Authentication-Results: mail.kernel.org; dmarc=none (p=none dis=none) header.from=walle.cc Authentication-Results: mail.kernel.org; spf=none smtp.mailfrom=linux-arm-kernel-bounces+patchwork-linux-arm=patchwork.kernel.org@lists.infradead.org DKIM-Signature: v=1; a=rsa-sha256; q=dns/txt; c=relaxed/relaxed; d=lists.infradead.org; s=merlin.20170209; h=Sender:Content-Transfer-Encoding: Content-Type:Cc:List-Subscribe:List-Help:List-Post:List-Archive: List-Unsubscribe:List-Id:MIME-Version:References:In-Reply-To:Message-Id:Date: Subject:To:From:Reply-To:Content-ID:Content-Description:Resent-Date: Resent-From:Resent-Sender:Resent-To:Resent-Cc:Resent-Message-ID:List-Owner; bh=YqBP4HQuC+aFMj6pwJaDGiAqZjWfh2afPddDafJvRFg=; b=BhE+UXnDgfn53DDnIdnr/+Cpw iS360yR0SoYqHUbCIMYp6TZnzZQ/pCIa6J9npWQQAO5VwxjFLZXsvh0nUrE/zfqG6JPdyLD6CI3sn 5x8STvume2yaPOvhTHzozGvYBaVRnU7PqxHAssaU5lo35IjJykzfsdEFGm1Rk4sDrNH4jev5bMkua LwVEnJYEkK4VZTog3zgB+qS+Qj6wGes2YxwFKFzwLqbPheOSSXPmLwUSGJUyMxUshKSSUjCXzLfik sXTZKiuARRE3RCJ2jyky5fL4YaVArX+vo6KWObauDRle0O9Eczctyyq5CPEPiC3+j+PY2WcP85M/3 jiD+G1eWA==; Received: from localhost ([::1] helo=merlin.infradead.org) by merlin.infradead.org with esmtp (Exim 4.92.3 #3 (Red Hat Linux)) id 1kHwGr-0002WV-S4; Mon, 14 Sep 2020 21:44:26 +0000 Received: from ssl.serverraum.org ([2a01:4f8:151:8464::1:2]) by merlin.infradead.org with esmtps (Exim 4.92.3 #3 (Red Hat Linux)) id 1kHwGY-0002NM-7o for linux-arm-kernel@lists.infradead.org; Mon, 14 Sep 2020 21:44:05 +0000 Received: from apollo.fritz.box (unknown [IPv6:2a02:810c:c200:2e91:6257:18ff:fec4:ca34]) (using TLSv1.3 with cipher TLS_AES_256_GCM_SHA384 (256/256 bits) key-exchange ECDHE (P-384) server-signature RSA-PSS (2048 bits) server-digest SHA256) (No client certificate requested) by ssl.serverraum.org (Postfix) with ESMTPSA id 2825522E0A; Mon, 14 Sep 2020 23:43:56 +0200 (CEST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=walle.cc; s=mail2016061301; t=1600119836; h=from:from:reply-to:subject:subject:date:date:message-id:message-id: to:to:cc:cc:mime-version:mime-version: content-transfer-encoding:content-transfer-encoding: in-reply-to:in-reply-to:references:references; bh=do3NDFjUJuferfg8grh3X8/2Pc3n8xO+4DbgzJyyx9Y=; b=Vq5JMhrWvMwC2CH5nSfR77S6Oo5iwtqgFM8IPS4qq3bRbt9NDVnNtnEHy5qmJQOtzf9Nha ziWqo5rPqjIewrSA9Ol5qUXUjpr0d7cWv0Q1GKLNd+fsGo6uJnoLhe2HwxKvJym+jywA2O Hz1mQg8py9mlXy9fLun6KP1m8hDLcWQ= From: Michael Walle To: linux-gpio@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-hwmon@vger.kernel.org, linux-pwm@vger.kernel.org, linux-watchdog@vger.kernel.org, linux-arm-kernel@lists.infradead.org Subject: [PATCH v10 01/13] mfd: add simple regmap based I2C driver Date: Mon, 14 Sep 2020 23:43:29 +0200 Message-Id: <20200914214341.14268-2-michael@walle.cc> X-Mailer: git-send-email 2.20.1 In-Reply-To: <20200914214341.14268-1-michael@walle.cc> References: <20200914214341.14268-1-michael@walle.cc> MIME-Version: 1.0 X-Spam: Yes X-CRM114-Version: 20100106-BlameMichelson ( TRE 0.8.0 (BSD) ) MR-646709E3 X-CRM114-CacheID: sfid-20200914_174402_568617_8FBE701A X-CRM114-Status: GOOD ( 27.18 ) X-Spam-Score: -2.5 (--) X-Spam-Report: SpamAssassin version 3.4.4 on merlin.infradead.org summary: Content analysis details: (-2.5 points) pts rule name description ---- ---------------------- -------------------------------------------------- -2.3 RCVD_IN_DNSWL_MED RBL: Sender listed at https://www.dnswl.org/, medium trust [2a01:4f8:151:8464:0:0:1:2 listed in] [list.dnswl.org] 0.0 SPF_HELO_NONE SPF: HELO does not publish an SPF Record -0.0 SPF_PASS SPF: sender matches SPF record -0.1 DKIM_VALID_EF Message has a valid DKIM or DK signature from envelope-from domain 0.1 DKIM_SIGNED Message has a DKIM or DK signature, not necessarily valid -0.1 DKIM_VALID_AU Message has a valid DKIM or DK signature from author's domain -0.1 DKIM_VALID Message has at least one valid DKIM or DK signature X-BeenThere: linux-arm-kernel@lists.infradead.org X-Mailman-Version: 2.1.29 Precedence: list List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Cc: Marc Zyngier , Jean Delvare , Catalin Marinas , Jason Cooper , Will Deacon , Greg Kroah-Hartman , Shawn Guo , Linus Walleij , Andy Shevchenko , Li Yang , Bartosz Golaszewski , Michael Walle , Rob Herring , Thierry Reding , Mark Brown , Pavel Machek , =?utf-8?q?Uwe_Kleine-K=C3=B6nig?= , Thomas Gleixner , Wim Van Sebroeck , Lee Jones , Guenter Roeck Sender: "linux-arm-kernel" Errors-To: linux-arm-kernel-bounces+patchwork-linux-arm=patchwork.kernel.org@lists.infradead.org There are I2C devices which contain several different functions but doesn't require any special access functions. For these kind of drivers an I2C regmap should be enough. Create an I2C driver which creates an I2C regmap and enumerates its children. If a device wants to use this as its MFD core driver, it has to add an individual compatible string. It may provide its own regmap configuration. Subdevices can use dev_get_regmap() on the parent to get their regmap instance. Signed-off-by: Michael Walle Acked-for-MFD-by: Lee Jones --- Changes since v9: - none Changes since v8: - fixed typo Changes since v7: - none Changes since v6: - added SIMPLE_MFD_I2C help text - revised description in module header Changes since v5: - removed "select MFD_CORE" in Kconfig - removed help text in Kconfig, we assume that the users of this driver will have a "select MFD_SIMPLE_MFD_I2C". Instead added a small description to the driver itself. - removed "struct simple_mfd_i2c_config" and use regmap_config directly - changed builtin_i2c_driver() to module_i2c_driver(), added MODULE_ boilerplate - cleaned up the included files Changes since v4: - new patch. Lee, please bear with me. I didn't want to delay the new version (where a lot of remarks on the other patches were addressed) even more, just because we haven't figured out how to deal with the MFD part. So for now, I've included this one. drivers/mfd/Kconfig | 12 ++++++++ drivers/mfd/Makefile | 1 + drivers/mfd/simple-mfd-i2c.c | 56 ++++++++++++++++++++++++++++++++++++ 3 files changed, 69 insertions(+) create mode 100644 drivers/mfd/simple-mfd-i2c.c diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig index 2bc3073d4891..b66b60eed003 100644 --- a/drivers/mfd/Kconfig +++ b/drivers/mfd/Kconfig @@ -1173,6 +1173,18 @@ config MFD_SI476X_CORE To compile this driver as a module, choose M here: the module will be called si476x-core. +config MFD_SIMPLE_MFD_I2C + tristate + depends on I2C + select REGMAP_I2C + help + This driver creates a single register map with the intention for it + to be shared by all sub-devices. + + Once the register map has been successfully initialised, any + sub-devices represented by child nodes in Device Tree will be + subsequently registered. + config MFD_SM501 tristate "Silicon Motion SM501" depends on HAS_DMA diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile index d660be7fef1b..e6c7520ed129 100644 --- a/drivers/mfd/Makefile +++ b/drivers/mfd/Makefile @@ -265,3 +265,4 @@ obj-$(CONFIG_MFD_STMFX) += stmfx.o obj-$(CONFIG_MFD_KHADAS_MCU) += khadas-mcu.o obj-$(CONFIG_SGI_MFD_IOC3) += ioc3.o +obj-$(CONFIG_MFD_SIMPLE_MFD_I2C) += simple-mfd-i2c.o diff --git a/drivers/mfd/simple-mfd-i2c.c b/drivers/mfd/simple-mfd-i2c.c new file mode 100644 index 000000000000..28e96a246be1 --- /dev/null +++ b/drivers/mfd/simple-mfd-i2c.c @@ -0,0 +1,56 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Simple MFD - I2C + * + * This driver creates a single register map with the intention for it to be + * shared by all sub-devices. Children can use their parent's device structure + * (dev.parent) in order to reference it. + * + * Once the register map has been successfully initialised, any sub-devices + * represented by child nodes in Device Tree will be subsequently registered. + */ + +#include +#include +#include +#include +#include + +static const struct regmap_config simple_regmap_config = { + .reg_bits = 8, + .val_bits = 8, +}; + +static int simple_mfd_i2c_probe(struct i2c_client *i2c) +{ + const struct regmap_config *config; + struct regmap *regmap; + + config = device_get_match_data(&i2c->dev); + if (!config) + config = &simple_regmap_config; + + regmap = devm_regmap_init_i2c(i2c, config); + if (IS_ERR(regmap)) + return PTR_ERR(regmap); + + return devm_of_platform_populate(&i2c->dev); +} + +static const struct of_device_id simple_mfd_i2c_of_match[] = { + {} +}; +MODULE_DEVICE_TABLE(of, simple_mfd_i2c_of_match); + +static struct i2c_driver simple_mfd_i2c_driver = { + .probe_new = simple_mfd_i2c_probe, + .driver = { + .name = "simple-mfd-i2c", + .of_match_table = simple_mfd_i2c_of_match, + }, +}; +module_i2c_driver(simple_mfd_i2c_driver); + +MODULE_AUTHOR("Michael Walle "); +MODULE_DESCRIPTION("Simple MFD - I2C driver"); +MODULE_LICENSE("GPL v2"); From patchwork Mon Sep 14 21:43:30 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Michael Walle X-Patchwork-Id: 11775037 Return-Path: Received: from mail.kernel.org (pdx-korg-mail-1.web.codeaurora.org [172.30.200.123]) by pdx-korg-patchwork-2.web.codeaurora.org (Postfix) with ESMTP id 82C936CA for ; Mon, 14 Sep 2020 21:47:49 +0000 (UTC) Received: from merlin.infradead.org (merlin.infradead.org [205.233.59.134]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by mail.kernel.org (Postfix) with ESMTPS id 4973A208DB for ; Mon, 14 Sep 2020 21:47:49 +0000 (UTC) Authentication-Results: mail.kernel.org; dkim=pass (2048-bit key) header.d=lists.infradead.org header.i=@lists.infradead.org header.b="UDpvKEeT"; dkim=fail reason="signature verification failed" (1024-bit key) header.d=walle.cc header.i=@walle.cc header.b="PQhDwJJU" DMARC-Filter: OpenDMARC Filter v1.3.2 mail.kernel.org 4973A208DB Authentication-Results: mail.kernel.org; dmarc=none (p=none dis=none) header.from=walle.cc Authentication-Results: mail.kernel.org; spf=none smtp.mailfrom=linux-arm-kernel-bounces+patchwork-linux-arm=patchwork.kernel.org@lists.infradead.org DKIM-Signature: v=1; a=rsa-sha256; q=dns/txt; c=relaxed/relaxed; d=lists.infradead.org; s=merlin.20170209; h=Sender:Content-Transfer-Encoding: Content-Type:Cc:List-Subscribe:List-Help:List-Post:List-Archive: List-Unsubscribe:List-Id:MIME-Version:References:In-Reply-To:Message-Id:Date: Subject:To:From:Reply-To:Content-ID:Content-Description:Resent-Date: Resent-From:Resent-Sender:Resent-To:Resent-Cc:Resent-Message-ID:List-Owner; bh=UYHTp2tEZOcA1YN0XMxwBNsz9V/W8VBqEqMhP0RchrI=; b=UDpvKEeToDJWzLCFgKNzjPuT4 jbWTT1BropBCAFyTT6vh/0mbVQyt3o0gEvuLluJ9IN2IFspFakpDy3qVp18Nkurn7NgftstrcPd9V YhJRy+TrwrtYiuKzXAub+b3m9a3pKUlQjZB5IY/5FR1/Gvjy5YqxvbjDojK7ZEa2qS+plPq0qzKJ0 yA83SLMifBKURZEbxyHYhowUhly0LCCfIHPaSUYnDL7PyYSytvU+RaF2xxsOWIg6iv87omxB/J40k ERPyLYnAGECyqgdLGXa3edG8Ws8VdOcfwnGBKIlhH16+REJWN5pNcShqkfu/aO/qMK1DLY2/iqQhl fI5zaFx7g==; Received: from localhost ([::1] helo=merlin.infradead.org) by merlin.infradead.org with esmtp (Exim 4.92.3 #3 (Red Hat Linux)) id 1kHwHc-0002jg-2r; Mon, 14 Sep 2020 21:45:08 +0000 Received: from ssl.serverraum.org ([2a01:4f8:151:8464::1:2]) by merlin.infradead.org with esmtps (Exim 4.92.3 #3 (Red Hat Linux)) id 1kHwGY-0002NL-7o for linux-arm-kernel@lists.infradead.org; Mon, 14 Sep 2020 21:44:10 +0000 Received: from apollo.fritz.box (unknown [IPv6:2a02:810c:c200:2e91:6257:18ff:fec4:ca34]) (using TLSv1.3 with cipher TLS_AES_256_GCM_SHA384 (256/256 bits) key-exchange ECDHE (P-384) server-signature RSA-PSS (2048 bits) server-digest SHA256) (No client certificate requested) by ssl.serverraum.org (Postfix) with ESMTPSA id F39DC22EEB; Mon, 14 Sep 2020 23:43:57 +0200 (CEST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=walle.cc; s=mail2016061301; t=1600119838; h=from:from:reply-to:subject:subject:date:date:message-id:message-id: to:to:cc:cc:mime-version:mime-version: content-transfer-encoding:content-transfer-encoding: in-reply-to:in-reply-to:references:references; bh=GVVnP0s9VKgvgKUwyJvkYpxxZu4C+Qh9EJ7BMKSXFdE=; b=PQhDwJJU1ArBHRpv+bh9r4G9JPMU0UK/2gktzCKb2ogzIPvAQAzV6rLb/roQbRMUqaHOuJ J0efrZOsj3DQYOdqAbLigF9U05mPmIOtaJSyXWYJ9dbblVA6xN6kSFyaKOdDJ13w48RHtd Wh/AWpucbY5E8dMRIl0zUaZj2Nzaklg= From: Michael Walle To: linux-gpio@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-hwmon@vger.kernel.org, linux-pwm@vger.kernel.org, linux-watchdog@vger.kernel.org, linux-arm-kernel@lists.infradead.org Subject: [PATCH v10 02/13] dt-bindings: mfd: Add bindings for sl28cpld Date: Mon, 14 Sep 2020 23:43:30 +0200 Message-Id: <20200914214341.14268-3-michael@walle.cc> X-Mailer: git-send-email 2.20.1 In-Reply-To: <20200914214341.14268-1-michael@walle.cc> References: <20200914214341.14268-1-michael@walle.cc> MIME-Version: 1.0 X-Spam: Yes X-CRM114-Version: 20100106-BlameMichelson ( TRE 0.8.0 (BSD) ) MR-646709E3 X-CRM114-CacheID: sfid-20200914_174402_572613_52CF9249 X-CRM114-Status: GOOD ( 20.95 ) X-Spam-Score: -2.5 (--) X-Spam-Report: SpamAssassin version 3.4.4 on merlin.infradead.org summary: Content analysis details: (-2.5 points) pts rule name description ---- ---------------------- -------------------------------------------------- -2.3 RCVD_IN_DNSWL_MED RBL: Sender listed at https://www.dnswl.org/, medium trust [2a01:4f8:151:8464:0:0:1:2 listed in] [list.dnswl.org] 0.0 SPF_HELO_NONE SPF: HELO does not publish an SPF Record -0.0 SPF_PASS SPF: sender matches SPF record -0.1 DKIM_VALID_EF Message has a valid DKIM or DK signature from envelope-from domain 0.1 DKIM_SIGNED Message has a DKIM or DK signature, not necessarily valid -0.1 DKIM_VALID_AU Message has a valid DKIM or DK signature from author's domain -0.1 DKIM_VALID Message has at least one valid DKIM or DK signature X-BeenThere: linux-arm-kernel@lists.infradead.org X-Mailman-Version: 2.1.29 Precedence: list List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Cc: Catalin Marinas , Linus Walleij , Thierry Reding , Pavel Machek , Will Deacon , Rob Herring , Wim Van Sebroeck , Marc Zyngier , Bartosz Golaszewski , =?utf-8?q?Uwe_Kleine-K?= =?utf-8?q?=C3=B6nig?= , Guenter Roeck , Jean Delvare , Jason Cooper , Rob Herring , Thomas Gleixner , Andy Shevchenko , Lee Jones , Greg Kroah-Hartman , Li Yang , Michael Walle , Mark Brown , Shawn Guo Sender: "linux-arm-kernel" Errors-To: linux-arm-kernel-bounces+patchwork-linux-arm=patchwork.kernel.org@lists.infradead.org Add a device tree bindings for the board management controller found on the Kontron SMARC-sAL28 board. Signed-off-by: Michael Walle Reviewed-by: Rob Herring --- Changes since v9: - none Changes since v8: - none Changes since v7: - none Changes since v6: - renamed "sl28cpld-r1" to "sl28cpld" - made paths relative - moved "reg" and "compatible" to the top of a node Changes since v5: - none Changes since v4: - fix the regex of the unit-address Changes since v3: - see cover letter .../bindings/gpio/kontron,sl28cpld-gpio.yaml | 54 +++++++ .../hwmon/kontron,sl28cpld-hwmon.yaml | 27 ++++ .../kontron,sl28cpld-intc.yaml | 54 +++++++ .../bindings/mfd/kontron,sl28cpld.yaml | 153 ++++++++++++++++++ .../bindings/pwm/kontron,sl28cpld-pwm.yaml | 35 ++++ .../watchdog/kontron,sl28cpld-wdt.yaml | 35 ++++ 6 files changed, 358 insertions(+) create mode 100644 Documentation/devicetree/bindings/gpio/kontron,sl28cpld-gpio.yaml create mode 100644 Documentation/devicetree/bindings/hwmon/kontron,sl28cpld-hwmon.yaml create mode 100644 Documentation/devicetree/bindings/interrupt-controller/kontron,sl28cpld-intc.yaml create mode 100644 Documentation/devicetree/bindings/mfd/kontron,sl28cpld.yaml create mode 100644 Documentation/devicetree/bindings/pwm/kontron,sl28cpld-pwm.yaml create mode 100644 Documentation/devicetree/bindings/watchdog/kontron,sl28cpld-wdt.yaml diff --git a/Documentation/devicetree/bindings/gpio/kontron,sl28cpld-gpio.yaml b/Documentation/devicetree/bindings/gpio/kontron,sl28cpld-gpio.yaml new file mode 100644 index 000000000000..e2d2c10e536a --- /dev/null +++ b/Documentation/devicetree/bindings/gpio/kontron,sl28cpld-gpio.yaml @@ -0,0 +1,54 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/gpio/kontron,sl28cpld-gpio.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: GPIO driver for the sl28cpld board management controller + +maintainers: + - Michael Walle + +description: | + This module is part of the sl28cpld multi-function device. For more + details see ../mfd/kontron,sl28cpld.yaml. + + There are three flavors of the GPIO controller, one full featured + input/output with interrupt support (kontron,sl28cpld-gpio), one + output-only (kontron,sl28-gpo) and one input-only (kontron,sl28-gpi). + + Each controller supports 8 GPIO lines. + +properties: + compatible: + enum: + - kontron,sl28cpld-gpio + - kontron,sl28cpld-gpi + - kontron,sl28cpld-gpo + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + "#interrupt-cells": + const: 2 + + interrupt-controller: true + + "#gpio-cells": + const: 2 + + gpio-controller: true + + gpio-line-names: + minItems: 1 + maxItems: 8 + +required: + - compatible + - "#gpio-cells" + - gpio-controller + +additionalProperties: false diff --git a/Documentation/devicetree/bindings/hwmon/kontron,sl28cpld-hwmon.yaml b/Documentation/devicetree/bindings/hwmon/kontron,sl28cpld-hwmon.yaml new file mode 100644 index 000000000000..010333cb25c0 --- /dev/null +++ b/Documentation/devicetree/bindings/hwmon/kontron,sl28cpld-hwmon.yaml @@ -0,0 +1,27 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/hwmon/kontron,sl28cpld-hwmon.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Hardware monitoring driver for the sl28cpld board management controller + +maintainers: + - Michael Walle + +description: | + This module is part of the sl28cpld multi-function device. For more + details see ../mfd/kontron,sl28cpld.yaml. + +properties: + compatible: + enum: + - kontron,sl28cpld-fan + + reg: + maxItems: 1 + +required: + - compatible + +additionalProperties: false diff --git a/Documentation/devicetree/bindings/interrupt-controller/kontron,sl28cpld-intc.yaml b/Documentation/devicetree/bindings/interrupt-controller/kontron,sl28cpld-intc.yaml new file mode 100644 index 000000000000..e8dfa6507f64 --- /dev/null +++ b/Documentation/devicetree/bindings/interrupt-controller/kontron,sl28cpld-intc.yaml @@ -0,0 +1,54 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/interrupt-controller/kontron,sl28cpld-intc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Interrupt controller driver for the sl28cpld board management controller + +maintainers: + - Michael Walle + +description: | + This module is part of the sl28cpld multi-function device. For more + details see ../mfd/kontron,sl28cpld.yaml. + + The following interrupts are available. All types and levels are fixed + and handled by the board management controller. + + ==== ============= ================================== + IRQ line/device description + ==== ============= ================================== + 0 RTC_INT# Interrupt line from on-board RTC + 1 SMB_ALERT# Event on SMB_ALERT# line (P1) + 2 ESPI_ALERT0# Event on ESPI_ALERT0# line (S43) + 3 ESPI_ALERT1# Event on ESPI_ALERT1# line (S44) + 4 PWR_BTN# Event on PWR_BTN# line (P128) + 5 SLEEP# Event on SLEEP# line (S149) + 6 watchdog Interrupt of the internal watchdog + 7 n/a not used + ==== ============= ================================== + +properties: + compatible: + enum: + - kontron,sl28cpld-intc + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + "#interrupt-cells": + const: 2 + + interrupt-controller: true + +required: + - compatible + - interrupts + - "#interrupt-cells" + - interrupt-controller + +additionalProperties: false diff --git a/Documentation/devicetree/bindings/mfd/kontron,sl28cpld.yaml b/Documentation/devicetree/bindings/mfd/kontron,sl28cpld.yaml new file mode 100644 index 000000000000..eb3b43547cb6 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/kontron,sl28cpld.yaml @@ -0,0 +1,153 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/kontron,sl28cpld.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Kontron's sl28cpld board management controller + +maintainers: + - Michael Walle + +description: | + The board management controller may contain different IP blocks like + watchdog, fan monitoring, PWM controller, interrupt controller and a + GPIO controller. + +properties: + compatible: + const: kontron,sl28cpld + + reg: + description: + I2C device address. + maxItems: 1 + + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + + "#interrupt-cells": + const: 2 + + interrupts: + maxItems: 1 + + interrupt-controller: true + +patternProperties: + "^gpio(@[0-9a-f]+)?$": + $ref: ../gpio/kontron,sl28cpld-gpio.yaml + + "^hwmon(@[0-9a-f]+)?$": + $ref: ../hwmon/kontron,sl28cpld-hwmon.yaml + + "^interrupt-controller(@[0-9a-f]+)?$": + $ref: ../interrupt-controller/kontron,sl28cpld-intc.yaml + + "^pwm(@[0-9a-f]+)?$": + $ref: ../pwm/kontron,sl28cpld-pwm.yaml + + "^watchdog(@[0-9a-f]+)?$": + $ref: ../watchdog/kontron,sl28cpld-wdt.yaml + +required: + - "#address-cells" + - "#size-cells" + - compatible + - reg + +additionalProperties: false + +examples: + - | + #include + i2c { + #address-cells = <1>; + #size-cells = <0>; + + sl28cpld@4a { + compatible = "kontron,sl28cpld"; + reg = <0x4a>; + #address-cells = <1>; + #size-cells = <0>; + + watchdog@4 { + compatible = "kontron,sl28cpld-wdt"; + reg = <0x4>; + kontron,assert-wdt-timeout-pin; + }; + + hwmon@b { + compatible = "kontron,sl28cpld-fan"; + reg = <0xb>; + }; + + pwm@c { + compatible = "kontron,sl28cpld-pwm"; + reg = <0xc>; + #pwm-cells = <2>; + }; + + pwm@e { + compatible = "kontron,sl28cpld-pwm"; + reg = <0xe>; + #pwm-cells = <2>; + }; + + gpio@10 { + compatible = "kontron,sl28cpld-gpio"; + reg = <0x10>; + interrupts-extended = <&gpio2 6 + IRQ_TYPE_EDGE_FALLING>; + + gpio-controller; + #gpio-cells = <2>; + gpio-line-names = "a", "b", "c"; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio@15 { + compatible = "kontron,sl28cpld-gpio"; + reg = <0x15>; + interrupts-extended = <&gpio2 6 + IRQ_TYPE_EDGE_FALLING>; + + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio@1a { + compatible = "kontron,sl28cpld-gpo"; + reg = <0x1a>; + + gpio-controller; + #gpio-cells = <2>; + }; + + gpio@1b { + compatible = "kontron,sl28cpld-gpi"; + reg = <0x1b>; + + gpio-controller; + #gpio-cells = <2>; + }; + + interrupt-controller@1c { + compatible = "kontron,sl28cpld-intc"; + reg = <0x1c>; + interrupts-extended = <&gpio2 6 + IRQ_TYPE_EDGE_FALLING>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/pwm/kontron,sl28cpld-pwm.yaml b/Documentation/devicetree/bindings/pwm/kontron,sl28cpld-pwm.yaml new file mode 100644 index 000000000000..981cfec53f37 --- /dev/null +++ b/Documentation/devicetree/bindings/pwm/kontron,sl28cpld-pwm.yaml @@ -0,0 +1,35 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pwm/kontron,sl28cpld-pwm.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: PWM driver for the sl28cpld board management controller + +maintainers: + - Michael Walle + +description: | + This module is part of the sl28cpld multi-function device. For more + details see ../mfd/kontron,sl28cpld.yaml. + + The controller supports one PWM channel and supports only four distinct + frequencies (250Hz, 500Hz, 1kHz, 2kHz). + +allOf: + - $ref: pwm.yaml# + +properties: + compatible: + const: kontron,sl28cpld-pwm + + reg: + maxItems: 1 + + "#pwm-cells": + const: 2 + +required: + - compatible + +additionalProperties: false diff --git a/Documentation/devicetree/bindings/watchdog/kontron,sl28cpld-wdt.yaml b/Documentation/devicetree/bindings/watchdog/kontron,sl28cpld-wdt.yaml new file mode 100644 index 000000000000..179272f74de5 --- /dev/null +++ b/Documentation/devicetree/bindings/watchdog/kontron,sl28cpld-wdt.yaml @@ -0,0 +1,35 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/watchdog/kontron,sl28cpld-wdt.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Watchdog driver for the sl28cpld board management controller + +maintainers: + - Michael Walle + +description: | + This module is part of the sl28cpld multi-function device. For more + details see ../mfd/kontron,sl28cpld.yaml. + +allOf: + - $ref: watchdog.yaml# + +properties: + compatible: + const: kontron,sl28cpld-wdt + + reg: + maxItems: 1 + + kontron,assert-wdt-timeout-pin: + description: The SMARC standard defines a WDT_TIME_OUT# pin. If this + property is set, this output will be pulsed when the watchdog bites + and the system resets. + type: boolean + +required: + - compatible + +additionalProperties: false From patchwork Mon Sep 14 21:43:31 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Michael Walle X-Patchwork-Id: 11775027 Return-Path: Received: from mail.kernel.org (pdx-korg-mail-1.web.codeaurora.org [172.30.200.123]) by pdx-korg-patchwork-2.web.codeaurora.org (Postfix) with ESMTP id 2BDD26CA for ; Mon, 14 Sep 2020 21:46:27 +0000 (UTC) Received: from merlin.infradead.org (merlin.infradead.org [205.233.59.134]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by mail.kernel.org (Postfix) with ESMTPS id F215A20E65 for ; Mon, 14 Sep 2020 21:46:26 +0000 (UTC) Authentication-Results: mail.kernel.org; dkim=pass (2048-bit key) header.d=lists.infradead.org header.i=@lists.infradead.org header.b="aT+GgS4Z"; dkim=fail reason="signature verification failed" (1024-bit key) header.d=walle.cc header.i=@walle.cc header.b="AiUKNDFS" DMARC-Filter: OpenDMARC Filter v1.3.2 mail.kernel.org F215A20E65 Authentication-Results: mail.kernel.org; dmarc=none (p=none dis=none) header.from=walle.cc Authentication-Results: mail.kernel.org; spf=none smtp.mailfrom=linux-arm-kernel-bounces+patchwork-linux-arm=patchwork.kernel.org@lists.infradead.org DKIM-Signature: v=1; a=rsa-sha256; q=dns/txt; c=relaxed/relaxed; d=lists.infradead.org; s=merlin.20170209; h=Sender:Content-Transfer-Encoding: Content-Type:Cc:List-Subscribe:List-Help:List-Post:List-Archive: List-Unsubscribe:List-Id:MIME-Version:References:In-Reply-To:Message-Id:Date: Subject:To:From:Reply-To:Content-ID:Content-Description:Resent-Date: Resent-From:Resent-Sender:Resent-To:Resent-Cc:Resent-Message-ID:List-Owner; bh=TK6pQW3osMcuIFy875wz653+cUBRlS3SsKBaGEt6Lfw=; b=aT+GgS4ZmxQbOqhuXnF1VsCSw qdpu+TK+HmH9XzJHPaWrKTVj/COedENk2oCDybqqIiCCtH/R2eI0Iz0Zl6oyaevkuznrEmnCeBdWi o3pU8UhIyJxlLhq7x2BHpNf3IEHAEB0q06pEgOJ+cCHgMC+JLlFojjrg3kwY0k2+gXGy28UtmdN/N j2ZpkCcktL/D0CreEDuOjlzC6UbsePCzkCrfFk33WTkaVxLhr5G7dSt0KUiHuRbLJaecvAMJM9XMR 1Y6SypQ1CJfYvUyZ8RFg+TeMmiX0WRsHuT6SZnUmmSaosHLFwLwqe3SzykFuiwP0faWQ7dbdD/yri zuixy4UuA==; Received: from localhost ([::1] helo=merlin.infradead.org) by merlin.infradead.org with esmtp (Exim 4.92.3 #3 (Red Hat Linux)) id 1kHwGn-0002Rx-Nv; Mon, 14 Sep 2020 21:44:17 +0000 Received: from ssl.serverraum.org ([2a01:4f8:151:8464::1:2]) by merlin.infradead.org with esmtps (Exim 4.92.3 #3 (Red Hat Linux)) id 1kHwGY-0002NR-7m for linux-arm-kernel@lists.infradead.org; Mon, 14 Sep 2020 21:44:05 +0000 Received: from apollo.fritz.box (unknown [IPv6:2a02:810c:c200:2e91:6257:18ff:fec4:ca34]) (using TLSv1.3 with cipher TLS_AES_256_GCM_SHA384 (256/256 bits) key-exchange ECDHE (P-384) server-signature RSA-PSS (2048 bits) server-digest SHA256) (No client certificate requested) by ssl.serverraum.org (Postfix) with ESMTPSA id D03CA22FEB; Mon, 14 Sep 2020 23:43:59 +0200 (CEST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=walle.cc; s=mail2016061301; t=1600119840; h=from:from:reply-to:subject:subject:date:date:message-id:message-id: to:to:cc:cc:mime-version:mime-version: content-transfer-encoding:content-transfer-encoding: in-reply-to:in-reply-to:references:references; bh=L8dnOCKcMC5RBEFlEjAO7W2mHaJzoAnPqBNK582r9yE=; b=AiUKNDFSL4y/yIUIBSXfNBcql0Ei4PN/d9c4IMh1BRg+D+MJUwaWGBltMOWMwdW4h8jkrf EgsZHIeRQdZpVJhguXSdRYGCoher3sOD/LA7z8ckxp/zJPa1KIune9UM7Tr8pzN47W1s2d qaCawGC5Pb6ZyhZOJwyGe5kk/VgGzaY= From: Michael Walle To: linux-gpio@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-hwmon@vger.kernel.org, linux-pwm@vger.kernel.org, linux-watchdog@vger.kernel.org, linux-arm-kernel@lists.infradead.org Subject: [PATCH v10 03/13] mfd: simple-mfd-i2c: add sl28cpld support Date: Mon, 14 Sep 2020 23:43:31 +0200 Message-Id: <20200914214341.14268-4-michael@walle.cc> X-Mailer: git-send-email 2.20.1 In-Reply-To: <20200914214341.14268-1-michael@walle.cc> References: <20200914214341.14268-1-michael@walle.cc> MIME-Version: 1.0 X-Spam: Yes X-CRM114-Version: 20100106-BlameMichelson ( TRE 0.8.0 (BSD) ) MR-646709E3 X-CRM114-CacheID: sfid-20200914_174402_484691_194F5956 X-CRM114-Status: GOOD ( 18.64 ) X-Spam-Score: -2.5 (--) X-Spam-Report: SpamAssassin version 3.4.4 on merlin.infradead.org summary: Content analysis details: (-2.5 points) pts rule name description ---- ---------------------- -------------------------------------------------- -2.3 RCVD_IN_DNSWL_MED RBL: Sender listed at https://www.dnswl.org/, medium trust [2a01:4f8:151:8464:0:0:1:2 listed in] [list.dnswl.org] 0.0 SPF_HELO_NONE SPF: HELO does not publish an SPF Record -0.0 SPF_PASS SPF: sender matches SPF record -0.1 DKIM_VALID_EF Message has a valid DKIM or DK signature from envelope-from domain 0.1 DKIM_SIGNED Message has a DKIM or DK signature, not necessarily valid -0.1 DKIM_VALID_AU Message has a valid DKIM or DK signature from author's domain -0.1 DKIM_VALID Message has at least one valid DKIM or DK signature X-BeenThere: linux-arm-kernel@lists.infradead.org X-Mailman-Version: 2.1.29 Precedence: list List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Cc: Marc Zyngier , Jean Delvare , Catalin Marinas , Jason Cooper , Will Deacon , Greg Kroah-Hartman , Shawn Guo , Linus Walleij , Andy Shevchenko , Li Yang , Bartosz Golaszewski , Michael Walle , Rob Herring , Thierry Reding , Mark Brown , Pavel Machek , =?utf-8?q?Uwe_Kleine-K=C3=B6nig?= , Thomas Gleixner , Wim Van Sebroeck , Lee Jones , Guenter Roeck Sender: "linux-arm-kernel" Errors-To: linux-arm-kernel-bounces+patchwork-linux-arm=patchwork.kernel.org@lists.infradead.org Add the core support for the board management controller found on the SMARC-sAL28 board. Also add a virtual symbol which pulls in the simple-mfd-i2c driver and provide a common symbol on which the subdevice drivers can depend on. At the moment, this controller is used on the Kontron SMARC-sAL28 board. Signed-off-by: Michael Walle Acked-for-MFD-by: Lee Jones --- Changes since v9: - none Changes since v8: - none Changes since v7: - added MFD_SL28CPLD virtual Kconfig symbol - Please note, that I intentionally removed the Acked-for-MFD-by because of this change. Changes since v6: - renamed "sl28cpld-r1" to "sl28cpld" Changes since v5: - none Changes since v4: - new patch drivers/mfd/Kconfig | 10 ++++++++++ drivers/mfd/simple-mfd-i2c.c | 1 + 2 files changed, 11 insertions(+) diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig index b66b60eed003..e1d3bf77b245 100644 --- a/drivers/mfd/Kconfig +++ b/drivers/mfd/Kconfig @@ -1185,6 +1185,16 @@ config MFD_SIMPLE_MFD_I2C sub-devices represented by child nodes in Device Tree will be subsequently registered. +config MFD_SL28CPLD + tristate "Kontron sl28cpld Board Management Controller" + select MFD_SIMPLE_MFD_I2C + help + Say yes here to enable support for the Kontron sl28cpld board + management controller. + + It can be found on the following boards: + * SMARC-sAL28 + config MFD_SM501 tristate "Silicon Motion SM501" depends on HAS_DMA diff --git a/drivers/mfd/simple-mfd-i2c.c b/drivers/mfd/simple-mfd-i2c.c index 28e96a246be1..87f684cff9a1 100644 --- a/drivers/mfd/simple-mfd-i2c.c +++ b/drivers/mfd/simple-mfd-i2c.c @@ -38,6 +38,7 @@ static int simple_mfd_i2c_probe(struct i2c_client *i2c) } static const struct of_device_id simple_mfd_i2c_of_match[] = { + { .compatible = "kontron,sl28cpld" }, {} }; MODULE_DEVICE_TABLE(of, simple_mfd_i2c_of_match); From patchwork Mon Sep 14 21:43:32 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Michael Walle X-Patchwork-Id: 11775039 Return-Path: Received: from mail.kernel.org (pdx-korg-mail-1.web.codeaurora.org [172.30.200.123]) by pdx-korg-patchwork-2.web.codeaurora.org (Postfix) with ESMTP id D986992C for ; Mon, 14 Sep 2020 21:48:07 +0000 (UTC) Received: from merlin.infradead.org (merlin.infradead.org [205.233.59.134]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by mail.kernel.org (Postfix) with ESMTPS id A940020936 for ; Mon, 14 Sep 2020 21:48:07 +0000 (UTC) Authentication-Results: mail.kernel.org; dkim=pass (2048-bit key) header.d=lists.infradead.org header.i=@lists.infradead.org header.b="2oZiOCEg"; dkim=fail reason="signature verification failed" (1024-bit key) header.d=walle.cc header.i=@walle.cc header.b="DAIUSYJO" DMARC-Filter: OpenDMARC Filter v1.3.2 mail.kernel.org A940020936 Authentication-Results: mail.kernel.org; dmarc=none (p=none dis=none) header.from=walle.cc Authentication-Results: mail.kernel.org; spf=none smtp.mailfrom=linux-arm-kernel-bounces+patchwork-linux-arm=patchwork.kernel.org@lists.infradead.org DKIM-Signature: v=1; a=rsa-sha256; q=dns/txt; c=relaxed/relaxed; d=lists.infradead.org; s=merlin.20170209; h=Sender:Content-Transfer-Encoding: Content-Type:Cc:List-Subscribe:List-Help:List-Post:List-Archive: List-Unsubscribe:List-Id:MIME-Version:References:In-Reply-To:Message-Id:Date: Subject:To:From:Reply-To:Content-ID:Content-Description:Resent-Date: Resent-From:Resent-Sender:Resent-To:Resent-Cc:Resent-Message-ID:List-Owner; bh=VB5Hi06deFiSTxQNToGq1U0WUs0+41QcJVvpcmXop7g=; b=2oZiOCEgvbmOEahDbpJLZSZzV 5kDLFeBlFQjDMjMKxSoTlqiqFbwd3PWmFnuIx5ORvardA4C/F60oKT4SoWSRLzCUOOI6uq22JUbPO bE+DwRj+UpAXgv6KER6XbuizSzBD2yiNP47xLIxsVkeaEFtdoO8Y7sYUyRpeoldLog9caNZlA5SrN l+pRzkrNVvAeoAqcgY8jDMDRIXmhWZ4o4KtZgtRL68DZLUmTApfipvkNcyMdXXZGyfQ+2iqQ3ovT+ mIDlfqGM9SmvI7PMQMy2SgiQKBbIQU1bDbVbM3yhFQpLgaTUU+mBrtT/KuocdBgSYssbLA+5GzMvI 4cIOapqjQ==; Received: from localhost ([::1] helo=merlin.infradead.org) by merlin.infradead.org with esmtp (Exim 4.92.3 #3 (Red Hat Linux)) id 1kHwHx-0002sK-0h; Mon, 14 Sep 2020 21:45:29 +0000 Received: from ssl.serverraum.org ([2a01:4f8:151:8464::1:2]) by merlin.infradead.org with esmtps (Exim 4.92.3 #3 (Red Hat Linux)) id 1kHwGY-0002Nq-Bb for linux-arm-kernel@lists.infradead.org; Mon, 14 Sep 2020 21:44:08 +0000 Received: from apollo.fritz.box (unknown [IPv6:2a02:810c:c200:2e91:6257:18ff:fec4:ca34]) (using TLSv1.3 with cipher TLS_AES_256_GCM_SHA384 (256/256 bits) key-exchange ECDHE (P-384) server-signature RSA-PSS (2048 bits) server-digest SHA256) (No client certificate requested) by ssl.serverraum.org (Postfix) with ESMTPSA id 933F823E3E; Mon, 14 Sep 2020 23:44:00 +0200 (CEST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=walle.cc; s=mail2016061301; t=1600119841; h=from:from:reply-to:subject:subject:date:date:message-id:message-id: to:to:cc:cc:mime-version:mime-version: content-transfer-encoding:content-transfer-encoding: in-reply-to:in-reply-to:references:references; bh=1Aospi5BHa7CcuGBXB40wDj2JAeA/bgHk3Hc0N/nxVw=; b=DAIUSYJOzxL/V8Op1AoJZ+U7D3bWv4G7u/cXaxneceZVRhoU/93y4ofdnOr4Dfj9jnLQLX 367b7pCupary4fKeV4vAmR1Vho++X6cPSXt2mcThqmqQBUCIwlrNujGEPAe1hjkn6+0A1N P4Zn//BJTDq5yhxzktFgNiNPTFFRYpw= From: Michael Walle To: linux-gpio@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-hwmon@vger.kernel.org, linux-pwm@vger.kernel.org, linux-watchdog@vger.kernel.org, linux-arm-kernel@lists.infradead.org Subject: [PATCH v10 04/13] irqchip: add sl28cpld interrupt controller support Date: Mon, 14 Sep 2020 23:43:32 +0200 Message-Id: <20200914214341.14268-5-michael@walle.cc> X-Mailer: git-send-email 2.20.1 In-Reply-To: <20200914214341.14268-1-michael@walle.cc> References: <20200914214341.14268-1-michael@walle.cc> MIME-Version: 1.0 X-Spam: Yes X-CRM114-Version: 20100106-BlameMichelson ( TRE 0.8.0 (BSD) ) MR-646709E3 X-CRM114-CacheID: sfid-20200914_174402_719852_7E9AD76B X-CRM114-Status: GOOD ( 25.67 ) X-Spam-Score: -2.5 (--) X-Spam-Report: SpamAssassin version 3.4.4 on merlin.infradead.org summary: Content analysis details: (-2.5 points) pts rule name description ---- ---------------------- -------------------------------------------------- -2.3 RCVD_IN_DNSWL_MED RBL: Sender listed at https://www.dnswl.org/, medium trust [2a01:4f8:151:8464:0:0:1:2 listed in] [list.dnswl.org] 0.0 SPF_HELO_NONE SPF: HELO does not publish an SPF Record -0.0 SPF_PASS SPF: sender matches SPF record -0.1 DKIM_VALID_EF Message has a valid DKIM or DK signature from envelope-from domain 0.1 DKIM_SIGNED Message has a DKIM or DK signature, not necessarily valid -0.1 DKIM_VALID_AU Message has a valid DKIM or DK signature from author's domain -0.1 DKIM_VALID Message has at least one valid DKIM or DK signature X-BeenThere: linux-arm-kernel@lists.infradead.org X-Mailman-Version: 2.1.29 Precedence: list List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Cc: Marc Zyngier , Jean Delvare , Catalin Marinas , Jason Cooper , Will Deacon , Greg Kroah-Hartman , Shawn Guo , Linus Walleij , Andy Shevchenko , Li Yang , Bartosz Golaszewski , Michael Walle , Rob Herring , Thierry Reding , Mark Brown , Pavel Machek , =?utf-8?q?Uwe_Kleine-K=C3=B6nig?= , Thomas Gleixner , Wim Van Sebroeck , Lee Jones , Guenter Roeck Sender: "linux-arm-kernel" Errors-To: linux-arm-kernel-bounces+patchwork-linux-arm=patchwork.kernel.org@lists.infradead.org Add support for the interrupt controller inside the sl28 CPLD management controller. The interrupt controller can handle at most 8 interrupts and is really simplistic and consists only of an interrupt mask and an interrupt pending register. Signed-off-by: Michael Walle Acked-by: Marc Zyngier --- Changes since v9: - none Changes since v8: - none Changes since v7: - added "depends on MFD_SL28CPLD=y || COMPILE_TEST" Changes since v6: - none Changes since v5: - none Changes since v4: - update copyright year - don't use "int irq" instead of "unsigne int irq", because platform_get_irq() might return a negative error code. Found by "kernel test robot - remove comma in terminator line of the compatible strings list, suggested by Andy - use newer devm_regmap_add_irq_chip_fwnode() - don't use KBUID_MODNAME, suggested by Andy - remove the platform device table Changes since v3: - see cover letter drivers/irqchip/Kconfig | 8 +++ drivers/irqchip/Makefile | 1 + drivers/irqchip/irq-sl28cpld.c | 96 ++++++++++++++++++++++++++++++++++ 3 files changed, 105 insertions(+) create mode 100644 drivers/irqchip/irq-sl28cpld.c diff --git a/drivers/irqchip/Kconfig b/drivers/irqchip/Kconfig index cdb769383a50..ca7630543a8a 100644 --- a/drivers/irqchip/Kconfig +++ b/drivers/irqchip/Kconfig @@ -246,6 +246,14 @@ config RENESAS_RZA1_IRQC Enable support for the Renesas RZ/A1 Interrupt Controller, to use up to 8 external interrupts with configurable sense select. +config SL28CPLD_INTC + bool "Kontron sl28cpld IRQ controller" + depends on MFD_SL28CPLD=y || COMPILE_TEST + select REGMAP_IRQ + help + Interrupt controller driver for the board management controller + found on the Kontron sl28 CPLD. + config ST_IRQCHIP bool select REGMAP diff --git a/drivers/irqchip/Makefile b/drivers/irqchip/Makefile index 8c983ad774f6..db5e37d2db11 100644 --- a/drivers/irqchip/Makefile +++ b/drivers/irqchip/Makefile @@ -110,3 +110,4 @@ obj-$(CONFIG_LOONGSON_HTPIC) += irq-loongson-htpic.o obj-$(CONFIG_LOONGSON_HTVEC) += irq-loongson-htvec.o obj-$(CONFIG_LOONGSON_PCH_PIC) += irq-loongson-pch-pic.o obj-$(CONFIG_LOONGSON_PCH_MSI) += irq-loongson-pch-msi.o +obj-$(CONFIG_SL28CPLD_INTC) += irq-sl28cpld.o diff --git a/drivers/irqchip/irq-sl28cpld.c b/drivers/irqchip/irq-sl28cpld.c new file mode 100644 index 000000000000..0aa50d025ef6 --- /dev/null +++ b/drivers/irqchip/irq-sl28cpld.c @@ -0,0 +1,96 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * sl28cpld interrupt controller driver + * + * Copyright 2020 Kontron Europe GmbH + */ + +#include +#include +#include +#include +#include +#include +#include + +#define INTC_IE 0x00 +#define INTC_IP 0x01 + +static const struct regmap_irq sl28cpld_irqs[] = { + REGMAP_IRQ_REG_LINE(0, 8), + REGMAP_IRQ_REG_LINE(1, 8), + REGMAP_IRQ_REG_LINE(2, 8), + REGMAP_IRQ_REG_LINE(3, 8), + REGMAP_IRQ_REG_LINE(4, 8), + REGMAP_IRQ_REG_LINE(5, 8), + REGMAP_IRQ_REG_LINE(6, 8), + REGMAP_IRQ_REG_LINE(7, 8), +}; + +struct sl28cpld_intc { + struct regmap *regmap; + struct regmap_irq_chip chip; + struct regmap_irq_chip_data *irq_data; +}; + +static int sl28cpld_intc_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct sl28cpld_intc *irqchip; + int irq; + u32 base; + int ret; + + if (!dev->parent) + return -ENODEV; + + irqchip = devm_kzalloc(dev, sizeof(*irqchip), GFP_KERNEL); + if (!irqchip) + return -ENOMEM; + + irqchip->regmap = dev_get_regmap(dev->parent, NULL); + if (!irqchip->regmap) + return -ENODEV; + + irq = platform_get_irq(pdev, 0); + if (irq < 0) + return irq; + + ret = device_property_read_u32(&pdev->dev, "reg", &base); + if (ret) + return -EINVAL; + + irqchip->chip.name = "sl28cpld-intc"; + irqchip->chip.irqs = sl28cpld_irqs; + irqchip->chip.num_irqs = ARRAY_SIZE(sl28cpld_irqs); + irqchip->chip.num_regs = 1; + irqchip->chip.status_base = base + INTC_IP; + irqchip->chip.mask_base = base + INTC_IE; + irqchip->chip.mask_invert = true, + irqchip->chip.ack_base = base + INTC_IP; + + return devm_regmap_add_irq_chip_fwnode(dev, dev_fwnode(dev), + irqchip->regmap, irq, + IRQF_SHARED | IRQF_ONESHOT, 0, + &irqchip->chip, + &irqchip->irq_data); +} + +static const struct of_device_id sl28cpld_intc_of_match[] = { + { .compatible = "kontron,sl28cpld-intc" }, + {} +}; +MODULE_DEVICE_TABLE(of, sl28cpld_intc_of_match); + +static struct platform_driver sl28cpld_intc_driver = { + .probe = sl28cpld_intc_probe, + .driver = { + .name = "sl28cpld-intc", + .of_match_table = sl28cpld_intc_of_match, + } +}; +module_platform_driver(sl28cpld_intc_driver); + +MODULE_DESCRIPTION("sl28cpld Interrupt Controller Driver"); +MODULE_AUTHOR("Michael Walle "); +MODULE_LICENSE("GPL"); From patchwork Mon Sep 14 21:43:33 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Michael Walle X-Patchwork-Id: 11775005 Return-Path: Received: from mail.kernel.org (pdx-korg-mail-1.web.codeaurora.org [172.30.200.123]) by pdx-korg-patchwork-2.web.codeaurora.org (Postfix) with ESMTP id B22686CA for ; Mon, 14 Sep 2020 21:45:45 +0000 (UTC) Received: from merlin.infradead.org (merlin.infradead.org [205.233.59.134]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by mail.kernel.org (Postfix) with ESMTPS id 79424204EA for ; Mon, 14 Sep 2020 21:45:45 +0000 (UTC) Authentication-Results: mail.kernel.org; dkim=pass (2048-bit key) header.d=lists.infradead.org header.i=@lists.infradead.org header.b="PDouwYpY"; dkim=fail reason="signature verification failed" (1024-bit key) header.d=walle.cc header.i=@walle.cc header.b="f5hp9Js3" DMARC-Filter: OpenDMARC Filter v1.3.2 mail.kernel.org 79424204EA Authentication-Results: mail.kernel.org; dmarc=none (p=none dis=none) header.from=walle.cc Authentication-Results: mail.kernel.org; spf=none smtp.mailfrom=linux-arm-kernel-bounces+patchwork-linux-arm=patchwork.kernel.org@lists.infradead.org DKIM-Signature: v=1; a=rsa-sha256; q=dns/txt; c=relaxed/relaxed; d=lists.infradead.org; s=merlin.20170209; h=Sender:Content-Transfer-Encoding: Content-Type:Cc:List-Subscribe:List-Help:List-Post:List-Archive: List-Unsubscribe:List-Id:MIME-Version:References:In-Reply-To:Message-Id:Date: Subject:To:From:Reply-To:Content-ID:Content-Description:Resent-Date: Resent-From:Resent-Sender:Resent-To:Resent-Cc:Resent-Message-ID:List-Owner; bh=KN1RtCSdmmIPAZrZvauHrOFtoi1G3Y+6m3k+b592cQ0=; b=PDouwYpY+wG6Uk0fHuLwWsKaV HMD9u4LiuAj18BFJSL7t93q/DdiJN3XtW2kOXwseBWQpSNDteI9xkOQ+GwU+hZ3A3ZaRYmzKnaZwC ch5YUVKqBEQfMtRKseZKH6eRwOSQke/2zASKgTjKk3mUAUhFc0Y/2LFV8jj7P9legCP1FYMLMg9F/ xIFZZU+EeqL22ha/Lq04q3L6Puzp5TPL51pmaPVsGkIvJhBwp/FenlljvmBbDgHRPhCXUFzU5m/ar w2XXsKIJ1KMtwXqDz3LB3weovIMtoXPyu143MDGle1QWWPXPHXWwY6WNavWGRVhjwgCyBhecyeRSD BzJGfg0Bw==; Received: from localhost ([::1] helo=merlin.infradead.org) by merlin.infradead.org with esmtp (Exim 4.92.3 #3 (Red Hat Linux)) id 1kHwI1-0002uc-3u; Mon, 14 Sep 2020 21:45:33 +0000 Received: from ssl.serverraum.org ([2a01:4f8:151:8464::1:2]) by merlin.infradead.org with esmtps (Exim 4.92.3 #3 (Red Hat Linux)) id 1kHwGc-0002QP-PL for linux-arm-kernel@lists.infradead.org; Mon, 14 Sep 2020 21:44:11 +0000 Received: from apollo.fritz.box (unknown [IPv6:2a02:810c:c200:2e91:6257:18ff:fec4:ca34]) (using TLSv1.3 with cipher TLS_AES_256_GCM_SHA384 (256/256 bits) key-exchange ECDHE (P-384) server-signature RSA-PSS (2048 bits) server-digest SHA256) (No client certificate requested) by ssl.serverraum.org (Postfix) with ESMTPSA id 8ED2B23E40; Mon, 14 Sep 2020 23:44:01 +0200 (CEST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=walle.cc; s=mail2016061301; t=1600119842; h=from:from:reply-to:subject:subject:date:date:message-id:message-id: to:to:cc:cc:mime-version:mime-version: content-transfer-encoding:content-transfer-encoding: in-reply-to:in-reply-to:references:references; bh=JCxKToPlnWWGGN4WI7tHD0eb9oQ5HKg+4zoPV30lqcE=; b=f5hp9Js3/nWHkBDX/FR1xAHG7+yZBOXAMT/koCGm4aTmiO4OgeG+l2/TgwtE7DQu0aw0Kz BDnd21kr47EgLOgzMFbbS/1KMz3IsUQ03CzANPLB3c/PlXKZBmDk1lokB3Re3yapY6n/Ii HV+dNlionLWxNbdmM9a0sIX1h4DkEPM= From: Michael Walle To: linux-gpio@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-hwmon@vger.kernel.org, linux-pwm@vger.kernel.org, linux-watchdog@vger.kernel.org, linux-arm-kernel@lists.infradead.org Subject: [PATCH v10 05/13] watchdog: add support for sl28cpld watchdog Date: Mon, 14 Sep 2020 23:43:33 +0200 Message-Id: <20200914214341.14268-6-michael@walle.cc> X-Mailer: git-send-email 2.20.1 In-Reply-To: <20200914214341.14268-1-michael@walle.cc> References: <20200914214341.14268-1-michael@walle.cc> MIME-Version: 1.0 X-Spam: Yes X-CRM114-Version: 20100106-BlameMichelson ( TRE 0.8.0 (BSD) ) MR-646709E3 X-CRM114-CacheID: sfid-20200914_174407_100779_4BE92EA6 X-CRM114-Status: GOOD ( 32.07 ) X-Spam-Score: -2.5 (--) X-Spam-Report: SpamAssassin version 3.4.4 on merlin.infradead.org summary: Content analysis details: (-2.5 points) pts rule name description ---- ---------------------- -------------------------------------------------- -2.3 RCVD_IN_DNSWL_MED RBL: Sender listed at https://www.dnswl.org/, medium trust [2a01:4f8:151:8464:0:0:1:2 listed in] [list.dnswl.org] 0.0 SPF_HELO_NONE SPF: HELO does not publish an SPF Record -0.0 SPF_PASS SPF: sender matches SPF record -0.1 DKIM_VALID_EF Message has a valid DKIM or DK signature from envelope-from domain 0.1 DKIM_SIGNED Message has a DKIM or DK signature, not necessarily valid -0.1 DKIM_VALID_AU Message has a valid DKIM or DK signature from author's domain -0.1 DKIM_VALID Message has at least one valid DKIM or DK signature X-BeenThere: linux-arm-kernel@lists.infradead.org X-Mailman-Version: 2.1.29 Precedence: list List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Cc: Marc Zyngier , Jean Delvare , Catalin Marinas , Jason Cooper , Will Deacon , Greg Kroah-Hartman , Shawn Guo , Linus Walleij , Andy Shevchenko , Li Yang , Bartosz Golaszewski , Michael Walle , Rob Herring , Thierry Reding , Mark Brown , Pavel Machek , =?utf-8?q?Uwe_Kleine-K=C3=B6nig?= , Thomas Gleixner , Wim Van Sebroeck , Lee Jones , Guenter Roeck Sender: "linux-arm-kernel" Errors-To: linux-arm-kernel-bounces+patchwork-linux-arm=patchwork.kernel.org@lists.infradead.org Add support for the watchdog of the sl28cpld board management controller. This is part of a multi-function device driver. Signed-off-by: Michael Walle Acked-by: Guenter Roeck --- Changes since v9: - none Changes since v8: - none Changes since v7: - added "depends on MFD_SL28CPLD || COMPILE_TEST" Changes since v6: - none Changes since v5: - none Changes since v4: - update copyright year - remove #include , suggested by Andy. - slightly reworked the error code handling (only style), suggested by Andy. - Don't use "if (ret < 0)", but only "if (ret)", suggested by Andy. - remove comma in terminator line of the compatible strings list - don't use KBUID_MODNAME - remove the platform device table Changes since v3: - see cover letter drivers/watchdog/Kconfig | 11 ++ drivers/watchdog/Makefile | 1 + drivers/watchdog/sl28cpld_wdt.c | 229 ++++++++++++++++++++++++++++++++ 3 files changed, 241 insertions(+) create mode 100644 drivers/watchdog/sl28cpld_wdt.c diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig index e4dd49895567..ba3108ca757d 100644 --- a/drivers/watchdog/Kconfig +++ b/drivers/watchdog/Kconfig @@ -340,6 +340,17 @@ config MLX_WDT To compile this driver as a module, choose M here: the module will be called mlx-wdt. +config SL28CPLD_WATCHDOG + tristate "Kontron sl28cpld Watchdog" + depends on MFD_SL28CPLD || COMPILE_TEST + select WATCHDOG_CORE + help + Say Y here to include support for the watchdog timer + on the Kontron sl28 CPLD. + + To compile this driver as a module, choose M here: the + module will be called sl28cpld_wdt. + # ALPHA Architecture # ARM Architecture diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile index 97bed1d3d97c..aa6e41126901 100644 --- a/drivers/watchdog/Makefile +++ b/drivers/watchdog/Makefile @@ -225,3 +225,4 @@ obj-$(CONFIG_MENF21BMC_WATCHDOG) += menf21bmc_wdt.o obj-$(CONFIG_MENZ069_WATCHDOG) += menz69_wdt.o obj-$(CONFIG_RAVE_SP_WATCHDOG) += rave-sp-wdt.o obj-$(CONFIG_STPMIC1_WATCHDOG) += stpmic1_wdt.o +obj-$(CONFIG_SL28CPLD_WATCHDOG) += sl28cpld_wdt.o diff --git a/drivers/watchdog/sl28cpld_wdt.c b/drivers/watchdog/sl28cpld_wdt.c new file mode 100644 index 000000000000..a45047d8d9ab --- /dev/null +++ b/drivers/watchdog/sl28cpld_wdt.c @@ -0,0 +1,229 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * sl28cpld watchdog driver + * + * Copyright 2020 Kontron Europe GmbH + */ + +#include +#include +#include +#include +#include +#include +#include + +/* + * Watchdog timer block registers. + */ +#define WDT_CTRL 0x00 +#define WDT_CTRL_EN BIT(0) +#define WDT_CTRL_LOCK BIT(2) +#define WDT_CTRL_ASSERT_SYS_RESET BIT(6) +#define WDT_CTRL_ASSERT_WDT_TIMEOUT BIT(7) +#define WDT_TIMEOUT 0x01 +#define WDT_KICK 0x02 +#define WDT_KICK_VALUE 0x6b +#define WDT_COUNT 0x03 + +#define WDT_DEFAULT_TIMEOUT 10 + +static bool nowayout = WATCHDOG_NOWAYOUT; +module_param(nowayout, bool, 0); +MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" + __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); + +static int timeout; +module_param(timeout, int, 0); +MODULE_PARM_DESC(timeout, "Initial watchdog timeout in seconds"); + +struct sl28cpld_wdt { + struct watchdog_device wdd; + struct regmap *regmap; + u32 offset; + bool assert_wdt_timeout; +}; + +static int sl28cpld_wdt_ping(struct watchdog_device *wdd) +{ + struct sl28cpld_wdt *wdt = watchdog_get_drvdata(wdd); + + return regmap_write(wdt->regmap, wdt->offset + WDT_KICK, + WDT_KICK_VALUE); +} + +static int sl28cpld_wdt_start(struct watchdog_device *wdd) +{ + struct sl28cpld_wdt *wdt = watchdog_get_drvdata(wdd); + unsigned int val; + + val = WDT_CTRL_EN | WDT_CTRL_ASSERT_SYS_RESET; + if (wdt->assert_wdt_timeout) + val |= WDT_CTRL_ASSERT_WDT_TIMEOUT; + if (nowayout) + val |= WDT_CTRL_LOCK; + + return regmap_update_bits(wdt->regmap, wdt->offset + WDT_CTRL, + val, val); +} + +static int sl28cpld_wdt_stop(struct watchdog_device *wdd) +{ + struct sl28cpld_wdt *wdt = watchdog_get_drvdata(wdd); + + return regmap_update_bits(wdt->regmap, wdt->offset + WDT_CTRL, + WDT_CTRL_EN, 0); +} + +static unsigned int sl28cpld_wdt_get_timeleft(struct watchdog_device *wdd) +{ + struct sl28cpld_wdt *wdt = watchdog_get_drvdata(wdd); + unsigned int val; + int ret; + + ret = regmap_read(wdt->regmap, wdt->offset + WDT_COUNT, &val); + if (ret) + return 0; + + return val; +} + +static int sl28cpld_wdt_set_timeout(struct watchdog_device *wdd, + unsigned int timeout) +{ + struct sl28cpld_wdt *wdt = watchdog_get_drvdata(wdd); + int ret; + + ret = regmap_write(wdt->regmap, wdt->offset + WDT_TIMEOUT, timeout); + if (ret) + return ret; + + wdd->timeout = timeout; + + return 0; +} + +static const struct watchdog_info sl28cpld_wdt_info = { + .options = WDIOF_MAGICCLOSE | WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING, + .identity = "sl28cpld watchdog", +}; + +static struct watchdog_ops sl28cpld_wdt_ops = { + .owner = THIS_MODULE, + .start = sl28cpld_wdt_start, + .stop = sl28cpld_wdt_stop, + .ping = sl28cpld_wdt_ping, + .set_timeout = sl28cpld_wdt_set_timeout, + .get_timeleft = sl28cpld_wdt_get_timeleft, +}; + +static int sl28cpld_wdt_probe(struct platform_device *pdev) +{ + struct watchdog_device *wdd; + struct sl28cpld_wdt *wdt; + unsigned int status; + unsigned int val; + int ret; + + if (!pdev->dev.parent) + return -ENODEV; + + wdt = devm_kzalloc(&pdev->dev, sizeof(*wdt), GFP_KERNEL); + if (!wdt) + return -ENOMEM; + + wdt->regmap = dev_get_regmap(pdev->dev.parent, NULL); + if (!wdt->regmap) + return -ENODEV; + + ret = device_property_read_u32(&pdev->dev, "reg", &wdt->offset); + if (ret) + return -EINVAL; + + wdt->assert_wdt_timeout = device_property_read_bool(&pdev->dev, + "kontron,assert-wdt-timeout-pin"); + + /* initialize struct watchdog_device */ + wdd = &wdt->wdd; + wdd->parent = &pdev->dev; + wdd->info = &sl28cpld_wdt_info; + wdd->ops = &sl28cpld_wdt_ops; + wdd->min_timeout = 1; + wdd->max_timeout = 255; + + watchdog_set_drvdata(wdd, wdt); + watchdog_stop_on_reboot(wdd); + + /* + * Read the status early, in case of an error, we haven't modified the + * hardware. + */ + ret = regmap_read(wdt->regmap, wdt->offset + WDT_CTRL, &status); + if (ret) + return ret; + + /* + * Initial timeout value, may be overwritten by device tree or module + * parmeter in watchdog_init_timeout(). + * + * Reading a zero here means that either the hardware has a default + * value of zero (which is very unlikely and definitely a hardware + * bug) or the bootloader set it to zero. In any case, we handle + * this case gracefully and set out own timeout. + */ + ret = regmap_read(wdt->regmap, wdt->offset + WDT_TIMEOUT, &val); + if (ret) + return ret; + + if (val) + wdd->timeout = val; + else + wdd->timeout = WDT_DEFAULT_TIMEOUT; + + watchdog_init_timeout(wdd, timeout, &pdev->dev); + sl28cpld_wdt_set_timeout(wdd, wdd->timeout); + + /* if the watchdog is locked, we set nowayout */ + if (status & WDT_CTRL_LOCK) + nowayout = true; + watchdog_set_nowayout(wdd, nowayout); + + /* + * If watchdog is already running, keep it enabled, but make + * sure its mode is set correctly. + */ + if (status & WDT_CTRL_EN) { + sl28cpld_wdt_start(wdd); + set_bit(WDOG_HW_RUNNING, &wdd->status); + } + + ret = devm_watchdog_register_device(&pdev->dev, wdd); + if (ret < 0) { + dev_err(&pdev->dev, "failed to register watchdog device\n"); + return ret; + } + + dev_info(&pdev->dev, "initial timeout %d sec%s\n", + wdd->timeout, nowayout ? ", nowayout" : ""); + + return 0; +} + +static const struct of_device_id sl28cpld_wdt_of_match[] = { + { .compatible = "kontron,sl28cpld-wdt" }, + {} +}; +MODULE_DEVICE_TABLE(of, sl28cpld_wdt_of_match); + +static struct platform_driver sl28cpld_wdt_driver = { + .probe = sl28cpld_wdt_probe, + .driver = { + .name = "sl28cpld-wdt", + .of_match_table = sl28cpld_wdt_of_match, + }, +}; +module_platform_driver(sl28cpld_wdt_driver); + +MODULE_DESCRIPTION("sl28cpld Watchdog Driver"); +MODULE_AUTHOR("Michael Walle "); +MODULE_LICENSE("GPL"); From patchwork Mon Sep 14 21:43:34 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 8bit X-Patchwork-Submitter: Michael Walle X-Patchwork-Id: 11775041 Return-Path: Received: from mail.kernel.org (pdx-korg-mail-1.web.codeaurora.org [172.30.200.123]) by pdx-korg-patchwork-2.web.codeaurora.org (Postfix) with ESMTP id EDB8792C for ; Mon, 14 Sep 2020 21:48:11 +0000 (UTC) Received: from merlin.infradead.org (merlin.infradead.org [205.233.59.134]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by mail.kernel.org (Postfix) with ESMTPS id B52A2208DB for ; Mon, 14 Sep 2020 21:48:11 +0000 (UTC) Authentication-Results: mail.kernel.org; dkim=pass (2048-bit key) header.d=lists.infradead.org header.i=@lists.infradead.org header.b="QD7AQWyP"; dkim=fail reason="signature verification failed" (1024-bit key) header.d=walle.cc header.i=@walle.cc header.b="BKbVEkcw" DMARC-Filter: OpenDMARC Filter v1.3.2 mail.kernel.org B52A2208DB Authentication-Results: mail.kernel.org; dmarc=none (p=none dis=none) header.from=walle.cc Authentication-Results: mail.kernel.org; spf=none smtp.mailfrom=linux-arm-kernel-bounces+patchwork-linux-arm=patchwork.kernel.org@lists.infradead.org DKIM-Signature: v=1; a=rsa-sha256; q=dns/txt; c=relaxed/relaxed; d=lists.infradead.org; s=merlin.20170209; h=Sender:Content-Transfer-Encoding: Content-Type:Cc:List-Subscribe:List-Help:List-Post:List-Archive: List-Unsubscribe:List-Id:MIME-Version:References:In-Reply-To:Message-Id:Date: Subject:To:From:Reply-To:Content-ID:Content-Description:Resent-Date: Resent-From:Resent-Sender:Resent-To:Resent-Cc:Resent-Message-ID:List-Owner; bh=FIdoaB2/nPsocFuiWkadAzvISUgqGreiZ8l5QIPHOs0=; b=QD7AQWyPBvAM+JckKTbWlTw4p dQtzvjKlVMgnwy8G26+Q3xLHDxomBp+szEzdgabl6C7t4kfSZhZDSVDjnLb8fj7PDfPTwwYLQ82o3 4Z1X9TZukH5SPmGel2y+Q98B4e/cYWZEQ48a8XqUEdQK0OZVzQt615nL2s1NDH97wu6CgG0kvnQic bFgZcpN8Z+1ASqjbmVC6rO45Z3noxLcxEMJuE9tP9nTkI47De7aqP8JvCtY+p+fBevkB+tphYK98z /OhLbAlAI3F10JB+hTr4soEHtvvcLUbiHJiIOksuLZJ2YQc4oU/oMkP0P2crK3VfrHstYUB6mVPee yivuC3nvg==; Received: from localhost ([::1] helo=merlin.infradead.org) by merlin.infradead.org with esmtp (Exim 4.92.3 #3 (Red Hat Linux)) id 1kHwI5-0002x5-ER; Mon, 14 Sep 2020 21:45:37 +0000 Received: from ssl.serverraum.org ([176.9.125.105]) by merlin.infradead.org with esmtps (Exim 4.92.3 #3 (Red Hat Linux)) id 1kHwGd-0002QN-20 for linux-arm-kernel@lists.infradead.org; Mon, 14 Sep 2020 21:44:12 +0000 Received: from apollo.fritz.box (unknown [IPv6:2a02:810c:c200:2e91:6257:18ff:fec4:ca34]) (using TLSv1.3 with cipher TLS_AES_256_GCM_SHA384 (256/256 bits) key-exchange ECDHE (P-384) server-signature RSA-PSS (2048 bits) server-digest SHA256) (No client certificate requested) by ssl.serverraum.org (Postfix) with ESMTPSA id 95FEC23E41; Mon, 14 Sep 2020 23:44:02 +0200 (CEST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=walle.cc; s=mail2016061301; t=1600119843; h=from:from:reply-to:subject:subject:date:date:message-id:message-id: to:to:cc:cc:mime-version:mime-version: content-transfer-encoding:content-transfer-encoding: in-reply-to:in-reply-to:references:references; bh=t2MH1scwcbIXAJreJZsYteuUtGQv1/VQUks+DVAxSUw=; b=BKbVEkcwD6UcJo8ukJXQEhBZLl/RI0HT4gRIubma/mnRGxBe3HY5s3jeXqYm/Jgc6sYsHj rNl9t7iCMRO+Dy1jC1iz+c/M+SYu2jrU04ECXl3hQ77DeAyxq+rFzoD5DWWvxxFjvqxP3o T8UeWr0qnYKrES6r7kDd2oWyB2wLCmM= From: Michael Walle To: linux-gpio@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-hwmon@vger.kernel.org, linux-pwm@vger.kernel.org, linux-watchdog@vger.kernel.org, linux-arm-kernel@lists.infradead.org Subject: [PATCH v10 06/13] pwm: add support for sl28cpld PWM controller Date: Mon, 14 Sep 2020 23:43:34 +0200 Message-Id: <20200914214341.14268-7-michael@walle.cc> X-Mailer: git-send-email 2.20.1 In-Reply-To: <20200914214341.14268-1-michael@walle.cc> References: <20200914214341.14268-1-michael@walle.cc> MIME-Version: 1.0 X-Spam: Yes X-CRM114-Version: 20100106-BlameMichelson ( TRE 0.8.0 (BSD) ) MR-646709E3 X-CRM114-CacheID: sfid-20200914_174407_402212_2F490911 X-CRM114-Status: GOOD ( 43.36 ) X-Spam-Score: -2.5 (--) X-Spam-Report: SpamAssassin version 3.4.4 on merlin.infradead.org summary: Content analysis details: (-2.5 points) pts rule name description ---- ---------------------- -------------------------------------------------- -2.3 RCVD_IN_DNSWL_MED RBL: Sender listed at https://www.dnswl.org/, medium trust [176.9.125.105 listed in list.dnswl.org] 0.0 SPF_HELO_NONE SPF: HELO does not publish an SPF Record -0.0 SPF_PASS SPF: sender matches SPF record -0.1 DKIM_VALID_EF Message has a valid DKIM or DK signature from envelope-from domain 0.1 DKIM_SIGNED Message has a DKIM or DK signature, not necessarily valid -0.1 DKIM_VALID_AU Message has a valid DKIM or DK signature from author's domain -0.1 DKIM_VALID Message has at least one valid DKIM or DK signature X-BeenThere: linux-arm-kernel@lists.infradead.org X-Mailman-Version: 2.1.29 Precedence: list List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Cc: Marc Zyngier , Jean Delvare , Catalin Marinas , Jason Cooper , Will Deacon , Greg Kroah-Hartman , Shawn Guo , Linus Walleij , Andy Shevchenko , Li Yang , Bartosz Golaszewski , Michael Walle , Rob Herring , Thierry Reding , Mark Brown , Pavel Machek , =?utf-8?q?Uwe_Kleine-K=C3=B6nig?= , Thomas Gleixner , Wim Van Sebroeck , Lee Jones , Guenter Roeck Sender: "linux-arm-kernel" Errors-To: linux-arm-kernel-bounces+patchwork-linux-arm=patchwork.kernel.org@lists.infradead.org Add support for the PWM controller of the sl28cpld board management controller. This is part of a multi-function device driver. The controller has one PWM channel and can just generate four distinct frequencies. Signed-off-by: Michael Walle Acked-by: Thierry Reding Reviewed-by: Uwe Kleine-König --- Changes since v9: - fixed double whitespace in Kconfig - improved comment about division Changes since v8: - none Changes since v7: - added "depends on MFD_SL28CPLD || COMPILE_TEST" - corrected comment about divison - sanitize pwm values before handing them over to the PWM core - check wether we need to write the the duty cycle first to avoid glitches Changes since v6: - added new row "period length" - fixed parenthesis mistake in the description of a calculation - added sl28cpld_pwm_{read/write}() - added more error messages Changes since v5: - added brief description of the PWM hardware implementation - added hardware limitations - dropped the frequency mode table, instead calculate the prescaler value on the fly. - round the requested parameters instead of support just distinct periods. - prefix the macros by SL28CPLD_ to make them less generic - set polarity to PWM_POLARITY_NORMAL and reject inverted polarity requests. - apply the workaround just for prescaler value of 0. - make errors during probing more verbose Changes since v4: - update copyright year - remove #include , suggested by Andy. - make the pwm mode table look nicer, suggested by Lee. - use dev_get_drvdata(chip->dev) instead of container_of(), suggested by Lee. - use whole sentence in comments, suggested by Lee. - renamed the local "struct sl28cpld_pwm" variable to "priv" everywhere, suggested by Lee. - use pwm_{get,set}_relative_duty_cycle(), suggested by Andy. - make the comment about the 250Hz hardware limitation clearer - don't use "if (ret < 0)", but only "if (ret)", suggested by Andy. - don't use KBUID_MODNAME - remove comma in terminator line of the compatible strings list - remove the platform device table Changes since v3: - see cover letter drivers/pwm/Kconfig | 10 ++ drivers/pwm/Makefile | 1 + drivers/pwm/pwm-sl28cpld.c | 270 +++++++++++++++++++++++++++++++++++++ 3 files changed, 281 insertions(+) create mode 100644 drivers/pwm/pwm-sl28cpld.c diff --git a/drivers/pwm/Kconfig b/drivers/pwm/Kconfig index 9448e4ca8c73..63be5362fd3a 100644 --- a/drivers/pwm/Kconfig +++ b/drivers/pwm/Kconfig @@ -428,6 +428,16 @@ config PWM_SIFIVE To compile this driver as a module, choose M here: the module will be called pwm-sifive. +config PWM_SL28CPLD + tristate "Kontron sl28cpld PWM support" + depends on MFD_SL28CPLD || COMPILE_TEST + help + Generic PWM framework driver for board management controller + found on the Kontron sl28 CPLD. + + To compile this driver as a module, choose M here: the module + will be called pwm-sl28cpld. + config PWM_SPEAR tristate "STMicroelectronics SPEAr PWM support" depends on PLAT_SPEAR || COMPILE_TEST diff --git a/drivers/pwm/Makefile b/drivers/pwm/Makefile index 2c2ba0a03557..cbdcd55d69ee 100644 --- a/drivers/pwm/Makefile +++ b/drivers/pwm/Makefile @@ -40,6 +40,7 @@ obj-$(CONFIG_PWM_RENESAS_TPU) += pwm-renesas-tpu.o obj-$(CONFIG_PWM_ROCKCHIP) += pwm-rockchip.o obj-$(CONFIG_PWM_SAMSUNG) += pwm-samsung.o obj-$(CONFIG_PWM_SIFIVE) += pwm-sifive.o +obj-$(CONFIG_PWM_SL28CPLD) += pwm-sl28cpld.o obj-$(CONFIG_PWM_SPEAR) += pwm-spear.o obj-$(CONFIG_PWM_SPRD) += pwm-sprd.o obj-$(CONFIG_PWM_STI) += pwm-sti.o diff --git a/drivers/pwm/pwm-sl28cpld.c b/drivers/pwm/pwm-sl28cpld.c new file mode 100644 index 000000000000..5046b6b7fd35 --- /dev/null +++ b/drivers/pwm/pwm-sl28cpld.c @@ -0,0 +1,270 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * sl28cpld PWM driver + * + * Copyright (c) 2020 Michael Walle + * + * There is no public datasheet available for this PWM core. But it is easy + * enough to be briefly explained. It consists of one 8-bit counter. The PWM + * supports four distinct frequencies by selecting when to reset the counter. + * With the prescaler setting you can select which bit of the counter is used + * to reset it. This implies that the higher the frequency the less remaining + * bits are available for the actual counter. + * + * Let cnt[7:0] be the counter, clocked at 32kHz: + * +-----------+--------+--------------+-----------+---------------+ + * | prescaler | reset | counter bits | frequency | period length | + * +-----------+--------+--------------+-----------+---------------+ + * | 0 | cnt[7] | cnt[6:0] | 250 Hz | 4000000 ns | + * | 1 | cnt[6] | cnt[5:0] | 500 Hz | 2000000 ns | + * | 2 | cnt[5] | cnt[4:0] | 1 kHz | 1000000 ns | + * | 3 | cnt[4] | cnt[3:0] | 2 kHz | 500000 ns | + * +-----------+--------+--------------+-----------+---------------+ + * + * Limitations: + * - The hardware cannot generate a 100% duty cycle if the prescaler is 0. + * - The hardware cannot atomically set the prescaler and the counter value, + * which might lead to glitches and inconsistent states if a write fails. + * - The counter is not reset if you switch the prescaler which leads + * to glitches, too. + * - The duty cycle will switch immediately and not after a complete cycle. + * - Depending on the actual implementation, disabling the PWM might have + * side effects. For example, if the output pin is shared with a GPIO pin + * it will automatically switch back to GPIO mode. + */ + +#include +#include +#include +#include +#include +#include +#include + +/* + * PWM timer block registers. + */ +#define SL28CPLD_PWM_CTRL 0x00 +#define SL28CPLD_PWM_CTRL_ENABLE BIT(7) +#define SL28CPLD_PWM_CTRL_PRESCALER_MASK GENMASK(1, 0) +#define SL28CPLD_PWM_CYCLE 0x01 +#define SL28CPLD_PWM_CYCLE_MAX GENMASK(6, 0) + +#define SL28CPLD_PWM_CLK 32000 /* 32 kHz */ +#define SL28CPLD_PWM_MAX_DUTY_CYCLE(prescaler) (1 << (7 - (prescaler))) +#define SL28CPLD_PWM_PERIOD(prescaler) \ + (NSEC_PER_SEC / SL28CPLD_PWM_CLK * SL28CPLD_PWM_MAX_DUTY_CYCLE(prescaler)) + +/* + * We calculate the duty cycle like this: + * duty_cycle_ns = pwm_cycle_reg * max_period_ns / max_duty_cycle + * + * With + * max_period_ns = 1 << (7 - prescaler) / SL28CPLD_PWM_CLK * NSEC_PER_SEC + * max_duty_cycle = 1 << (7 - prescaler) + * this then simplifies to: + * duty_cycle_ns = pwm_cycle_reg / SL28CPLD_PWM_CLK * NSEC_PER_SEC + * = NSEC_PER_SEC / SL28CPLD_PWM_CLK * pwm_cycle_reg + * + * NSEC_PER_SEC is a multiple of SL28CPLD_PWM_CLK, therefore we're not losing + * precision by doing the divison first. + */ +#define SL28CPLD_PWM_TO_DUTY_CYCLE(reg) \ + (NSEC_PER_SEC / SL28CPLD_PWM_CLK * (reg)) +#define SL28CPLD_PWM_FROM_DUTY_CYCLE(duty_cycle) \ + (DIV_ROUND_DOWN_ULL((duty_cycle), NSEC_PER_SEC / SL28CPLD_PWM_CLK)) + +#define sl28cpld_pwm_read(priv, reg, val) \ + regmap_read((priv)->regmap, (priv)->offset + (reg), (val)) +#define sl28cpld_pwm_write(priv, reg, val) \ + regmap_write((priv)->regmap, (priv)->offset + (reg), (val)) + +struct sl28cpld_pwm { + struct pwm_chip pwm_chip; + struct regmap *regmap; + u32 offset; +}; + +static void sl28cpld_pwm_get_state(struct pwm_chip *chip, + struct pwm_device *pwm, + struct pwm_state *state) +{ + struct sl28cpld_pwm *priv = dev_get_drvdata(chip->dev); + unsigned int reg; + int prescaler; + + sl28cpld_pwm_read(priv, SL28CPLD_PWM_CTRL, ®); + + state->enabled = reg & SL28CPLD_PWM_CTRL_ENABLE; + + prescaler = FIELD_GET(SL28CPLD_PWM_CTRL_PRESCALER_MASK, reg); + state->period = SL28CPLD_PWM_PERIOD(prescaler); + + sl28cpld_pwm_read(priv, SL28CPLD_PWM_CYCLE, ®); + state->duty_cycle = SL28CPLD_PWM_TO_DUTY_CYCLE(reg); + state->polarity = PWM_POLARITY_NORMAL; + + /* + * Sanitize values for the PWM core. Depending on the prescaler it + * might happen that we calculate a duty_cycle greater than the actual + * period. This might happen if someone (e.g. the bootloader) sets an + * invalid combination of values. The behavior of the hardware is + * undefined in this case. But we need to report sane values back to + * the PWM core. + */ + state->duty_cycle = min(state->duty_cycle, state->period); +} + +static int sl28cpld_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm, + const struct pwm_state *state) +{ + struct sl28cpld_pwm *priv = dev_get_drvdata(chip->dev); + unsigned int cycle, prescaler; + bool write_duty_cycle_first; + int ret; + u8 ctrl; + + /* Polarity inversion is not supported */ + if (state->polarity != PWM_POLARITY_NORMAL) + return -EINVAL; + + /* + * Calculate the prescaler. Pick the biggest period that isn't + * bigger than the requested period. + */ + prescaler = DIV_ROUND_UP_ULL(SL28CPLD_PWM_PERIOD(0), state->period); + prescaler = order_base_2(prescaler); + + if (prescaler > field_max(SL28CPLD_PWM_CTRL_PRESCALER_MASK)) + return -ERANGE; + + ctrl = FIELD_PREP(SL28CPLD_PWM_CTRL_PRESCALER_MASK, prescaler); + if (state->enabled) + ctrl |= SL28CPLD_PWM_CTRL_ENABLE; + + cycle = SL28CPLD_PWM_FROM_DUTY_CYCLE(state->duty_cycle); + cycle = min_t(unsigned int, cycle, SL28CPLD_PWM_MAX_DUTY_CYCLE(prescaler)); + + /* + * Work around the hardware limitation. See also above. Trap 100% duty + * cycle if the prescaler is 0. Set prescaler to 1 instead. We don't + * care about the frequency because its "all-one" in either case. + * + * We don't need to check the actual prescaler setting, because only + * if the prescaler is 0 we can have this particular value. + */ + if (cycle == SL28CPLD_PWM_MAX_DUTY_CYCLE(0)) { + ctrl &= ~SL28CPLD_PWM_CTRL_PRESCALER_MASK; + ctrl |= FIELD_PREP(SL28CPLD_PWM_CTRL_PRESCALER_MASK, 1); + cycle = SL28CPLD_PWM_MAX_DUTY_CYCLE(1); + } + + /* + * To avoid glitches when we switch the prescaler, we have to make sure + * we have a valid duty cycle for the new mode. + * + * Take the current prescaler (or the current period length) into + * account to decide whether we have to write the duty cycle or the new + * prescaler first. If the period length is decreasing we have to + * write the duty cycle first. + */ + write_duty_cycle_first = pwm->state.period > state->period; + + if (write_duty_cycle_first) { + ret = sl28cpld_pwm_write(priv, SL28CPLD_PWM_CYCLE, cycle); + if (ret) + return ret; + } + + ret = sl28cpld_pwm_write(priv, SL28CPLD_PWM_CTRL, ctrl); + if (ret) + return ret; + + if (!write_duty_cycle_first) { + ret = sl28cpld_pwm_write(priv, SL28CPLD_PWM_CYCLE, cycle); + if (ret) + return ret; + } + + return 0; +} + +static const struct pwm_ops sl28cpld_pwm_ops = { + .apply = sl28cpld_pwm_apply, + .get_state = sl28cpld_pwm_get_state, + .owner = THIS_MODULE, +}; + +static int sl28cpld_pwm_probe(struct platform_device *pdev) +{ + struct sl28cpld_pwm *priv; + struct pwm_chip *chip; + int ret; + + if (!pdev->dev.parent) { + dev_err(&pdev->dev, "no parent device\n"); + return -ENODEV; + } + + priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + priv->regmap = dev_get_regmap(pdev->dev.parent, NULL); + if (!priv->regmap) { + dev_err(&pdev->dev, "could not get parent regmap\n"); + return -ENODEV; + } + + ret = device_property_read_u32(&pdev->dev, "reg", &priv->offset); + if (ret) { + dev_err(&pdev->dev, "no 'reg' property found (%pe)\n", + ERR_PTR(ret)); + return -EINVAL; + } + + /* Initialize the pwm_chip structure */ + chip = &priv->pwm_chip; + chip->dev = &pdev->dev; + chip->ops = &sl28cpld_pwm_ops; + chip->base = -1; + chip->npwm = 1; + + ret = pwmchip_add(&priv->pwm_chip); + if (ret) { + dev_err(&pdev->dev, "failed to add PWM chip (%pe)", + ERR_PTR(ret)); + return ret; + } + + platform_set_drvdata(pdev, priv); + + return 0; +} + +static int sl28cpld_pwm_remove(struct platform_device *pdev) +{ + struct sl28cpld_pwm *priv = platform_get_drvdata(pdev); + + return pwmchip_remove(&priv->pwm_chip); +} + +static const struct of_device_id sl28cpld_pwm_of_match[] = { + { .compatible = "kontron,sl28cpld-pwm" }, + {} +}; +MODULE_DEVICE_TABLE(of, sl28cpld_pwm_of_match); + +static struct platform_driver sl28cpld_pwm_driver = { + .probe = sl28cpld_pwm_probe, + .remove = sl28cpld_pwm_remove, + .driver = { + .name = "sl28cpld-pwm", + .of_match_table = sl28cpld_pwm_of_match, + }, +}; +module_platform_driver(sl28cpld_pwm_driver); + +MODULE_DESCRIPTION("sl28cpld PWM Driver"); +MODULE_AUTHOR("Michael Walle "); +MODULE_LICENSE("GPL"); From patchwork Mon Sep 14 21:43:35 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Michael Walle X-Patchwork-Id: 11774987 Return-Path: Received: from mail.kernel.org (pdx-korg-mail-1.web.codeaurora.org [172.30.200.123]) by pdx-korg-patchwork-2.web.codeaurora.org (Postfix) with ESMTP id D1C596CA for ; Mon, 14 Sep 2020 21:45:10 +0000 (UTC) Received: from merlin.infradead.org (merlin.infradead.org [205.233.59.134]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by mail.kernel.org (Postfix) with ESMTPS id A425A20936 for ; Mon, 14 Sep 2020 21:45:10 +0000 (UTC) Authentication-Results: mail.kernel.org; dkim=pass (2048-bit key) header.d=lists.infradead.org header.i=@lists.infradead.org header.b="uRXg0P8b"; dkim=fail reason="signature verification failed" (1024-bit key) header.d=walle.cc header.i=@walle.cc header.b="bhBRmCd8" DMARC-Filter: OpenDMARC Filter v1.3.2 mail.kernel.org A425A20936 Authentication-Results: mail.kernel.org; dmarc=none (p=none dis=none) header.from=walle.cc Authentication-Results: mail.kernel.org; spf=none smtp.mailfrom=linux-arm-kernel-bounces+patchwork-linux-arm=patchwork.kernel.org@lists.infradead.org DKIM-Signature: v=1; a=rsa-sha256; q=dns/txt; c=relaxed/relaxed; d=lists.infradead.org; s=merlin.20170209; h=Sender:Content-Transfer-Encoding: Content-Type:Cc:List-Subscribe:List-Help:List-Post:List-Archive: List-Unsubscribe:List-Id:MIME-Version:References:In-Reply-To:Message-Id:Date: Subject:To:From:Reply-To:Content-ID:Content-Description:Resent-Date: Resent-From:Resent-Sender:Resent-To:Resent-Cc:Resent-Message-ID:List-Owner; bh=rQ6I0V0prdynnQYTS1HYC/H7jWO5n8Fp3xigUulPymE=; b=uRXg0P8bst1O8PegJX5oqz7wu 3elxQfq63o6ByPLIecHCE8AfgJxNY+prv/3HGLAlMykV/otmqwPFs+n2/noLxG/WhnTjt/NOLVGgv 1b1tLVUFMDByTSU8l1gXNaMWRq/++gUbob3Kli+ELJBoWSQPnLq/7VTMn8j/M77yXN7q/N02wG205 nE3/MmyNcXTPXR+H9swbFL6E3FRt7g5QlEtG2QPj063npXb3cYdFu5Ghr8jMlt0LB8M1qyfC/wjXx kgo7L7chEMvU/TX9fcHgDFOC6uqgkLcpwwLaLhJeyi1K8weWBnTRCzbwcifii2KoyR+N3myEDpGaY 4BgpvPuFQ==; Received: from localhost ([::1] helo=merlin.infradead.org) by merlin.infradead.org with esmtp (Exim 4.92.3 #3 (Red Hat Linux)) id 1kHwHE-0002d6-HH; Mon, 14 Sep 2020 21:44:45 +0000 Received: from ssl.serverraum.org ([176.9.125.105]) by merlin.infradead.org with esmtps (Exim 4.92.3 #3 (Red Hat Linux)) id 1kHwGd-0002QM-1t for linux-arm-kernel@lists.infradead.org; Mon, 14 Sep 2020 21:44:11 +0000 Received: from apollo.fritz.box (unknown [IPv6:2a02:810c:c200:2e91:6257:18ff:fec4:ca34]) (using TLSv1.3 with cipher TLS_AES_256_GCM_SHA384 (256/256 bits) key-exchange ECDHE (P-384) server-signature RSA-PSS (2048 bits) server-digest SHA256) (No client certificate requested) by ssl.serverraum.org (Postfix) with ESMTPSA id 60E2823E42; Mon, 14 Sep 2020 23:44:03 +0200 (CEST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=walle.cc; s=mail2016061301; t=1600119843; h=from:from:reply-to:subject:subject:date:date:message-id:message-id: to:to:cc:cc:mime-version:mime-version: content-transfer-encoding:content-transfer-encoding: in-reply-to:in-reply-to:references:references; bh=FkaVW2U5RK8rfkrAhIYjhOgXO8X57E+kVL3UJTPug/8=; b=bhBRmCd8K4LxJsvUX5WyARH552U7PE3jT1H37AVNC1QceWBynCnZ+IAGDNuGZKNtfbY8xO h0PoQvIpkG6n/5D+xoST1sS0+4d/HlTF2N4a5UUtt7048F+/H+44kSH6354EAgyhLyUNB+ HuI2rspMQ495fR0WnTAsakCgae7eK84= From: Michael Walle To: linux-gpio@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-hwmon@vger.kernel.org, linux-pwm@vger.kernel.org, linux-watchdog@vger.kernel.org, linux-arm-kernel@lists.infradead.org Subject: [PATCH v10 07/13] gpio: add support for the sl28cpld GPIO controller Date: Mon, 14 Sep 2020 23:43:35 +0200 Message-Id: <20200914214341.14268-8-michael@walle.cc> X-Mailer: git-send-email 2.20.1 In-Reply-To: <20200914214341.14268-1-michael@walle.cc> References: <20200914214341.14268-1-michael@walle.cc> MIME-Version: 1.0 X-Spam: Yes X-CRM114-Version: 20100106-BlameMichelson ( TRE 0.8.0 (BSD) ) MR-646709E3 X-CRM114-CacheID: sfid-20200914_174407_399621_D6D5B4C6 X-CRM114-Status: GOOD ( 30.35 ) X-Spam-Score: -2.5 (--) X-Spam-Report: SpamAssassin version 3.4.4 on merlin.infradead.org summary: Content analysis details: (-2.5 points) pts rule name description ---- ---------------------- -------------------------------------------------- -2.3 RCVD_IN_DNSWL_MED RBL: Sender listed at https://www.dnswl.org/, medium trust [176.9.125.105 listed in list.dnswl.org] 0.0 SPF_HELO_NONE SPF: HELO does not publish an SPF Record -0.0 SPF_PASS SPF: sender matches SPF record -0.1 DKIM_VALID_EF Message has a valid DKIM or DK signature from envelope-from domain 0.1 DKIM_SIGNED Message has a DKIM or DK signature, not necessarily valid -0.1 DKIM_VALID_AU Message has a valid DKIM or DK signature from author's domain -0.1 DKIM_VALID Message has at least one valid DKIM or DK signature X-BeenThere: linux-arm-kernel@lists.infradead.org X-Mailman-Version: 2.1.29 Precedence: list List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Cc: Marc Zyngier , Jean Delvare , Catalin Marinas , Jason Cooper , Will Deacon , Greg Kroah-Hartman , Shawn Guo , Linus Walleij , Andy Shevchenko , Li Yang , Bartosz Golaszewski , Michael Walle , Rob Herring , Thierry Reding , Mark Brown , Pavel Machek , =?utf-8?q?Uwe_Kleine-K=C3=B6nig?= , Thomas Gleixner , Wim Van Sebroeck , Lee Jones , Guenter Roeck Sender: "linux-arm-kernel" Errors-To: linux-arm-kernel-bounces+patchwork-linux-arm=patchwork.kernel.org@lists.infradead.org Add support for the GPIO controller of the sl28 board management controller. This driver is part of a multi-function device. A controller has 8 lines. There are three different flavors: full-featured GPIO with interrupt support, input-only and output-only. Signed-off-by: Michael Walle Reviewed-by: Linus Walleij Reviewed-by: Andy Shevchenko --- Changes since v9: - none Changes since v8: - none Changes since v7: - added "depends on MFD_SL28CPLD || COMPILE_TEST" Changes since v6: - none Changes since v5: - added "select REGMAP_IRQ" Changes since v4: - update copyright year - remove #include , suggested by Andy. - use device_get_match_data(), suggested by Andy. - drop the irq_support variable, instead call _init_irq() directly, suggested by Andy. - also move the irq code a bit around to make it look nicer - drop "struct sl28cpld_gpio". We don't need to actually store the irq_chip and irq_chip_data, everything is device resource managed. - use 100 chars line limit, suggested by Andy. - remove the platform device table - don't use KBUID_MODNAME Changes since v3: - see cover letter drivers/gpio/Kconfig | 12 +++ drivers/gpio/Makefile | 1 + drivers/gpio/gpio-sl28cpld.c | 161 +++++++++++++++++++++++++++++++++++ 3 files changed, 174 insertions(+) create mode 100644 drivers/gpio/gpio-sl28cpld.c diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig index 5cfdaf3b004d..759db34fcf27 100644 --- a/drivers/gpio/Kconfig +++ b/drivers/gpio/Kconfig @@ -1223,6 +1223,18 @@ config GPIO_RC5T583 This driver provides the support for driving/reading the gpio pins of RC5T583 device through standard gpio library. +config GPIO_SL28CPLD + tristate "Kontron sl28cpld GPIO support" + depends on MFD_SL28CPLD || COMPILE_TEST + select GPIO_REGMAP + select GPIOLIB_IRQCHIP + select REGMAP_IRQ + help + This enables support for the GPIOs found on the Kontron sl28 CPLD. + + This driver can also be built as a module. If so, the module will be + called gpio-sl28cpld. + config GPIO_STMPE bool "STMPE GPIOs" depends on MFD_STMPE diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile index 4f9abff4f2dc..c3a4e7c94a91 100644 --- a/drivers/gpio/Makefile +++ b/drivers/gpio/Makefile @@ -132,6 +132,7 @@ obj-$(CONFIG_GPIO_SCH311X) += gpio-sch311x.o obj-$(CONFIG_GPIO_SCH) += gpio-sch.o obj-$(CONFIG_GPIO_SIFIVE) += gpio-sifive.o obj-$(CONFIG_GPIO_SIOX) += gpio-siox.o +obj-$(CONFIG_GPIO_SL28CPLD) += gpio-sl28cpld.o obj-$(CONFIG_GPIO_SODAVILLE) += gpio-sodaville.o obj-$(CONFIG_GPIO_SPEAR_SPICS) += gpio-spear-spics.o obj-$(CONFIG_GPIO_SPRD) += gpio-sprd.o diff --git a/drivers/gpio/gpio-sl28cpld.c b/drivers/gpio/gpio-sl28cpld.c new file mode 100644 index 000000000000..889b8f5622c2 --- /dev/null +++ b/drivers/gpio/gpio-sl28cpld.c @@ -0,0 +1,161 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * sl28cpld GPIO driver + * + * Copyright 2020 Michael Walle + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +/* GPIO flavor */ +#define GPIO_REG_DIR 0x00 +#define GPIO_REG_OUT 0x01 +#define GPIO_REG_IN 0x02 +#define GPIO_REG_IE 0x03 +#define GPIO_REG_IP 0x04 + +/* input-only flavor */ +#define GPI_REG_IN 0x00 + +/* output-only flavor */ +#define GPO_REG_OUT 0x00 + +enum sl28cpld_gpio_type { + SL28CPLD_GPIO = 1, + SL28CPLD_GPI, + SL28CPLD_GPO, +}; + +static const struct regmap_irq sl28cpld_gpio_irqs[] = { + REGMAP_IRQ_REG_LINE(0, 8), + REGMAP_IRQ_REG_LINE(1, 8), + REGMAP_IRQ_REG_LINE(2, 8), + REGMAP_IRQ_REG_LINE(3, 8), + REGMAP_IRQ_REG_LINE(4, 8), + REGMAP_IRQ_REG_LINE(5, 8), + REGMAP_IRQ_REG_LINE(6, 8), + REGMAP_IRQ_REG_LINE(7, 8), +}; + +static int sl28cpld_gpio_irq_init(struct platform_device *pdev, + unsigned int base, + struct gpio_regmap_config *config) +{ + struct regmap_irq_chip_data *irq_data; + struct regmap_irq_chip *irq_chip; + struct device *dev = &pdev->dev; + int irq, ret; + + if (!device_property_read_bool(dev, "interrupt-controller")) + return 0; + + irq = platform_get_irq(pdev, 0); + if (irq < 0) + return irq; + + irq_chip = devm_kzalloc(dev, sizeof(*irq_chip), GFP_KERNEL); + if (!irq_chip) + return -ENOMEM; + + irq_chip->name = "sl28cpld-gpio-irq", + irq_chip->irqs = sl28cpld_gpio_irqs; + irq_chip->num_irqs = ARRAY_SIZE(sl28cpld_gpio_irqs); + irq_chip->num_regs = 1; + irq_chip->status_base = base + GPIO_REG_IP; + irq_chip->mask_base = base + GPIO_REG_IE; + irq_chip->mask_invert = true, + irq_chip->ack_base = base + GPIO_REG_IP; + + ret = devm_regmap_add_irq_chip_fwnode(dev, dev_fwnode(dev), + config->regmap, irq, + IRQF_SHARED | IRQF_ONESHOT, + 0, irq_chip, &irq_data); + if (ret) + return ret; + + config->irq_domain = regmap_irq_get_domain(irq_data); + + return 0; +} + +static int sl28cpld_gpio_probe(struct platform_device *pdev) +{ + struct gpio_regmap_config config = {0}; + enum sl28cpld_gpio_type type; + struct regmap *regmap; + u32 base; + int ret; + + if (!pdev->dev.parent) + return -ENODEV; + + type = (uintptr_t)device_get_match_data(&pdev->dev); + if (!type) + return -ENODEV; + + ret = device_property_read_u32(&pdev->dev, "reg", &base); + if (ret) + return -EINVAL; + + regmap = dev_get_regmap(pdev->dev.parent, NULL); + if (!regmap) + return -ENODEV; + + config.regmap = regmap; + config.parent = &pdev->dev; + config.ngpio = 8; + + switch (type) { + case SL28CPLD_GPIO: + config.reg_dat_base = base + GPIO_REG_IN; + config.reg_set_base = base + GPIO_REG_OUT; + /* reg_dir_out_base might be zero */ + config.reg_dir_out_base = GPIO_REGMAP_ADDR(base + GPIO_REG_DIR); + + /* This type supports interrupts */ + ret = sl28cpld_gpio_irq_init(pdev, base, &config); + if (ret) + return ret; + break; + case SL28CPLD_GPO: + config.reg_set_base = base + GPO_REG_OUT; + break; + case SL28CPLD_GPI: + config.reg_dat_base = base + GPI_REG_IN; + break; + default: + dev_err(&pdev->dev, "unknown type %d\n", type); + return -ENODEV; + } + + return PTR_ERR_OR_ZERO(devm_gpio_regmap_register(&pdev->dev, &config)); +} + +static const struct of_device_id sl28cpld_gpio_of_match[] = { + { .compatible = "kontron,sl28cpld-gpio", .data = (void *)SL28CPLD_GPIO }, + { .compatible = "kontron,sl28cpld-gpi", .data = (void *)SL28CPLD_GPI }, + { .compatible = "kontron,sl28cpld-gpo", .data = (void *)SL28CPLD_GPO }, + {} +}; +MODULE_DEVICE_TABLE(of, sl28cpld_gpio_of_match); + +static struct platform_driver sl28cpld_gpio_driver = { + .probe = sl28cpld_gpio_probe, + .driver = { + .name = "sl28cpld-gpio", + .of_match_table = sl28cpld_gpio_of_match, + }, +}; +module_platform_driver(sl28cpld_gpio_driver); + +MODULE_DESCRIPTION("sl28cpld GPIO Driver"); +MODULE_AUTHOR("Michael Walle "); +MODULE_LICENSE("GPL"); From patchwork Mon Sep 14 21:43:36 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Michael Walle X-Patchwork-Id: 11775033 Return-Path: Received: from mail.kernel.org (pdx-korg-mail-1.web.codeaurora.org [172.30.200.123]) by pdx-korg-patchwork-2.web.codeaurora.org (Postfix) with ESMTP id 67C5492C for ; Mon, 14 Sep 2020 21:46:56 +0000 (UTC) Received: from merlin.infradead.org (merlin.infradead.org [205.233.59.134]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by mail.kernel.org (Postfix) with ESMTPS id 36C6220936 for ; Mon, 14 Sep 2020 21:46:56 +0000 (UTC) Authentication-Results: mail.kernel.org; dkim=pass (2048-bit key) header.d=lists.infradead.org header.i=@lists.infradead.org header.b="nPWSWLHt"; dkim=fail reason="signature verification failed" (1024-bit key) header.d=walle.cc header.i=@walle.cc header.b="ocpiEf7L" DMARC-Filter: OpenDMARC Filter v1.3.2 mail.kernel.org 36C6220936 Authentication-Results: mail.kernel.org; dmarc=none (p=none dis=none) header.from=walle.cc Authentication-Results: mail.kernel.org; spf=none smtp.mailfrom=linux-arm-kernel-bounces+patchwork-linux-arm=patchwork.kernel.org@lists.infradead.org DKIM-Signature: v=1; a=rsa-sha256; q=dns/txt; c=relaxed/relaxed; d=lists.infradead.org; s=merlin.20170209; h=Sender:Content-Transfer-Encoding: Content-Type:Cc:List-Subscribe:List-Help:List-Post:List-Archive: List-Unsubscribe:List-Id:MIME-Version:References:In-Reply-To:Message-Id:Date: Subject:To:From:Reply-To:Content-ID:Content-Description:Resent-Date: Resent-From:Resent-Sender:Resent-To:Resent-Cc:Resent-Message-ID:List-Owner; bh=hfBayuyxlHxNjtWxZBeRrO0b4OaaAAA0hB+DpfR3P4M=; b=nPWSWLHtqw53qRh0tN/RzPO4C xwSB9uc+E+nSRMoUYFfnv5bR1uc8DyuFkuGjA2KgAKHs75dbJQSaYNhhaBwITtLYfyb+gpakbohJK 8GgNQ9r8tTvZbstYH8cjb3ZVGrM82uJ4T89xf0t1KO2ritUMcCYJMMRD5gvn4YF2ePVY7ylqY2psx b6SSJff4/o+9d45WS7UZWUxMs5rYt4n4QSledUaUWlJyAy8zY/YIHUocv7SF/VuZIS0Ng6LviyIca ob5yfa1xtUjMKGjwFv2gXzLc9aWRnVkziphDyB+xjJcj4Mpvsa911tHZsM5wLRapF4bMxF1oJsy00 woQ71XUaQ==; Received: from localhost ([::1] helo=merlin.infradead.org) by merlin.infradead.org with esmtp (Exim 4.92.3 #3 (Red Hat Linux)) id 1kHwH2-0002Z8-0R; Mon, 14 Sep 2020 21:44:32 +0000 Received: from ssl.serverraum.org ([2a01:4f8:151:8464::1:2]) by merlin.infradead.org with esmtps (Exim 4.92.3 #3 (Red Hat Linux)) id 1kHwGc-0002QO-PQ for linux-arm-kernel@lists.infradead.org; Mon, 14 Sep 2020 21:44:10 +0000 Received: from apollo.fritz.box (unknown [IPv6:2a02:810c:c200:2e91:6257:18ff:fec4:ca34]) (using TLSv1.3 with cipher TLS_AES_256_GCM_SHA384 (256/256 bits) key-exchange ECDHE (P-384) server-signature RSA-PSS (2048 bits) server-digest SHA256) (No client certificate requested) by ssl.serverraum.org (Postfix) with ESMTPSA id 839AD23E45; Mon, 14 Sep 2020 23:44:04 +0200 (CEST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=walle.cc; s=mail2016061301; t=1600119845; h=from:from:reply-to:subject:subject:date:date:message-id:message-id: to:to:cc:cc:mime-version:mime-version: content-transfer-encoding:content-transfer-encoding: in-reply-to:in-reply-to:references:references; bh=QQ5trF1OGQDCqg6cnv1KRNil3tF6UoLVK8scjDjPyCg=; b=ocpiEf7L6FNLKY4yyS7Rgfak/BquqJGfuPvuqRFuLsanz0tJ4Dm5nPK5GYR+jj5dkk+xyU /DU39LHm9/GcJK0E6/+MBKGSn/we8YFnZucRoRj8zpm/97ektMfV7KWr10FRlulJJUYSTX iLgUVNlkFmO0MBo/Zd1gIrWgQYQtpb4= From: Michael Walle To: linux-gpio@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-hwmon@vger.kernel.org, linux-pwm@vger.kernel.org, linux-watchdog@vger.kernel.org, linux-arm-kernel@lists.infradead.org Subject: [PATCH v10 08/13] hwmon: add support for the sl28cpld hardware monitoring controller Date: Mon, 14 Sep 2020 23:43:36 +0200 Message-Id: <20200914214341.14268-9-michael@walle.cc> X-Mailer: git-send-email 2.20.1 In-Reply-To: <20200914214341.14268-1-michael@walle.cc> References: <20200914214341.14268-1-michael@walle.cc> MIME-Version: 1.0 X-Spam: Yes X-CRM114-Version: 20100106-BlameMichelson ( TRE 0.8.0 (BSD) ) MR-646709E3 X-CRM114-CacheID: sfid-20200914_174407_097530_2AA5FA35 X-CRM114-Status: GOOD ( 33.11 ) X-Spam-Score: -2.5 (--) X-Spam-Report: SpamAssassin version 3.4.4 on merlin.infradead.org summary: Content analysis details: (-2.5 points) pts rule name description ---- ---------------------- -------------------------------------------------- -2.3 RCVD_IN_DNSWL_MED RBL: Sender listed at https://www.dnswl.org/, medium trust [2a01:4f8:151:8464:0:0:1:2 listed in] [list.dnswl.org] 0.0 SPF_HELO_NONE SPF: HELO does not publish an SPF Record -0.0 SPF_PASS SPF: sender matches SPF record -0.1 DKIM_VALID_EF Message has a valid DKIM or DK signature from envelope-from domain 0.1 DKIM_SIGNED Message has a DKIM or DK signature, not necessarily valid -0.1 DKIM_VALID_AU Message has a valid DKIM or DK signature from author's domain -0.1 DKIM_VALID Message has at least one valid DKIM or DK signature X-BeenThere: linux-arm-kernel@lists.infradead.org X-Mailman-Version: 2.1.29 Precedence: list List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Cc: Marc Zyngier , Jean Delvare , Catalin Marinas , Jason Cooper , Will Deacon , Greg Kroah-Hartman , Shawn Guo , Linus Walleij , Andy Shevchenko , Li Yang , Bartosz Golaszewski , Michael Walle , Rob Herring , Thierry Reding , Mark Brown , Pavel Machek , =?utf-8?q?Uwe_Kleine-K=C3=B6nig?= , Thomas Gleixner , Wim Van Sebroeck , Lee Jones , Guenter Roeck Sender: "linux-arm-kernel" Errors-To: linux-arm-kernel-bounces+patchwork-linux-arm=patchwork.kernel.org@lists.infradead.org Add support for the hardware monitoring controller of the sl28cpld board management controller. This driver is part of a multi-function device. Signed-off-by: Michael Walle Acked-by: Guenter Roeck Reviewed-by: Andy Shevchenko --- Changes since v9: - none Changes since v8: - none Changes since v7: - added "depends on MFD_SL28CPLD || COMPILE_TEST" Changes since v6: - none Changes since v5: - none Changes since v4: - update copyright year - remove #include , suggested by Andy. - use PTR_ERR_OR_ZERO(), suggested by Andy. - remove the platform device table - don't use KBUID_MODNAME Changes since v3: - see cover letter Documentation/hwmon/index.rst | 1 + Documentation/hwmon/sl28cpld.rst | 36 ++++++++ drivers/hwmon/Kconfig | 10 +++ drivers/hwmon/Makefile | 1 + drivers/hwmon/sl28cpld-hwmon.c | 142 +++++++++++++++++++++++++++++++ 5 files changed, 190 insertions(+) create mode 100644 Documentation/hwmon/sl28cpld.rst create mode 100644 drivers/hwmon/sl28cpld-hwmon.c diff --git a/Documentation/hwmon/index.rst b/Documentation/hwmon/index.rst index a926f1abaec3..e79986ea4ae5 100644 --- a/Documentation/hwmon/index.rst +++ b/Documentation/hwmon/index.rst @@ -155,6 +155,7 @@ Hardware Monitoring Kernel Drivers sht3x shtc1 sis5595 + sl28cpld smm665 smsc47b397 smsc47m192 diff --git a/Documentation/hwmon/sl28cpld.rst b/Documentation/hwmon/sl28cpld.rst new file mode 100644 index 000000000000..7ed65f78250c --- /dev/null +++ b/Documentation/hwmon/sl28cpld.rst @@ -0,0 +1,36 @@ +.. SPDX-License-Identifier: GPL-2.0-only + +Kernel driver sl28cpld +====================== + +Supported chips: + + * Kontron sl28cpld + + Prefix: 'sl28cpld' + + Datasheet: not available + +Authors: Michael Walle + +Description +----------- + +The sl28cpld is a board management controller which also exposes a hardware +monitoring controller. At the moment this controller supports a single fan +supervisor. In the future there might be other flavours and additional +hardware monitoring might be supported. + +The fan supervisor has a 7 bit counter register and a counter period of 1 +second. If the 7 bit counter overflows, the supervisor will automatically +switch to x8 mode to support a wider input range at the loss of +granularity. + +Sysfs entries +------------- + +The following attributes are supported. + +======================= ======================================================== +fan1_input Fan RPM. Assuming 2 pulses per revolution. +======================= ======================================================== diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig index 8dc28b26916e..d98c0a6860d1 100644 --- a/drivers/hwmon/Kconfig +++ b/drivers/hwmon/Kconfig @@ -1479,6 +1479,16 @@ config SENSORS_RASPBERRYPI_HWMON This driver can also be built as a module. If so, the module will be called raspberrypi-hwmon. +config SENSORS_SL28CPLD + tristate "Kontron sl28cpld hardware monitoring driver" + depends on MFD_SL28CPLD || COMPILE_TEST + help + If you say yes here you get support for the fan supervisor of the + sl28cpld board management controller. + + This driver can also be built as a module. If so, the module + will be called sl28cpld-hwmon. + config SENSORS_SHT15 tristate "Sensiron humidity and temperature sensors. SHT15 and compat." depends on GPIOLIB || COMPILE_TEST diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile index a8f4b35b136b..dee8511f9348 100644 --- a/drivers/hwmon/Makefile +++ b/drivers/hwmon/Makefile @@ -159,6 +159,7 @@ obj-$(CONFIG_SENSORS_S3C) += s3c-hwmon.o obj-$(CONFIG_SENSORS_SCH56XX_COMMON)+= sch56xx-common.o obj-$(CONFIG_SENSORS_SCH5627) += sch5627.o obj-$(CONFIG_SENSORS_SCH5636) += sch5636.o +obj-$(CONFIG_SENSORS_SL28CPLD) += sl28cpld-hwmon.o obj-$(CONFIG_SENSORS_SHT15) += sht15.o obj-$(CONFIG_SENSORS_SHT21) += sht21.o obj-$(CONFIG_SENSORS_SHT3x) += sht3x.o diff --git a/drivers/hwmon/sl28cpld-hwmon.c b/drivers/hwmon/sl28cpld-hwmon.c new file mode 100644 index 000000000000..e48f58ec5b9c --- /dev/null +++ b/drivers/hwmon/sl28cpld-hwmon.c @@ -0,0 +1,142 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * sl28cpld hardware monitoring driver + * + * Copyright 2020 Kontron Europe GmbH + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +#define FAN_INPUT 0x00 +#define FAN_SCALE_X8 BIT(7) +#define FAN_VALUE_MASK GENMASK(6, 0) + +struct sl28cpld_hwmon { + struct regmap *regmap; + u32 offset; +}; + +static umode_t sl28cpld_hwmon_is_visible(const void *data, + enum hwmon_sensor_types type, + u32 attr, int channel) +{ + return 0444; +} + +static int sl28cpld_hwmon_read(struct device *dev, + enum hwmon_sensor_types type, u32 attr, + int channel, long *input) +{ + struct sl28cpld_hwmon *hwmon = dev_get_drvdata(dev); + unsigned int value; + int ret; + + switch (attr) { + case hwmon_fan_input: + ret = regmap_read(hwmon->regmap, hwmon->offset + FAN_INPUT, + &value); + if (ret) + return ret; + /* + * The register has a 7 bit value and 1 bit which indicates the + * scale. If the MSB is set, then the lower 7 bit has to be + * multiplied by 8, to get the correct reading. + */ + if (value & FAN_SCALE_X8) + value = FIELD_GET(FAN_VALUE_MASK, value) << 3; + + /* + * The counter period is 1000ms and the sysfs specification + * says we should asssume 2 pulses per revolution. + */ + value *= 60 / 2; + + break; + default: + return -EOPNOTSUPP; + } + + *input = value; + return 0; +} + +static const u32 sl28cpld_hwmon_fan_config[] = { + HWMON_F_INPUT, + 0 +}; + +static const struct hwmon_channel_info sl28cpld_hwmon_fan = { + .type = hwmon_fan, + .config = sl28cpld_hwmon_fan_config, +}; + +static const struct hwmon_channel_info *sl28cpld_hwmon_info[] = { + &sl28cpld_hwmon_fan, + NULL +}; + +static const struct hwmon_ops sl28cpld_hwmon_ops = { + .is_visible = sl28cpld_hwmon_is_visible, + .read = sl28cpld_hwmon_read, +}; + +static const struct hwmon_chip_info sl28cpld_hwmon_chip_info = { + .ops = &sl28cpld_hwmon_ops, + .info = sl28cpld_hwmon_info, +}; + +static int sl28cpld_hwmon_probe(struct platform_device *pdev) +{ + struct sl28cpld_hwmon *hwmon; + struct device *hwmon_dev; + int ret; + + if (!pdev->dev.parent) + return -ENODEV; + + hwmon = devm_kzalloc(&pdev->dev, sizeof(*hwmon), GFP_KERNEL); + if (!hwmon) + return -ENOMEM; + + hwmon->regmap = dev_get_regmap(pdev->dev.parent, NULL); + if (!hwmon->regmap) + return -ENODEV; + + ret = device_property_read_u32(&pdev->dev, "reg", &hwmon->offset); + if (ret) + return -EINVAL; + + hwmon_dev = devm_hwmon_device_register_with_info(&pdev->dev, + "sl28cpld_hwmon", hwmon, + &sl28cpld_hwmon_chip_info, NULL); + if (IS_ERR(hwmon_dev)) + dev_err(&pdev->dev, "failed to register as hwmon device"); + + return PTR_ERR_OR_ZERO(hwmon_dev); +} + +static const struct of_device_id sl28cpld_hwmon_of_match[] = { + { .compatible = "kontron,sl28cpld-fan" }, + {} +}; +MODULE_DEVICE_TABLE(of, sl28cpld_hwmon_of_match); + +static struct platform_driver sl28cpld_hwmon_driver = { + .probe = sl28cpld_hwmon_probe, + .driver = { + .name = "sl28cpld-fan", + .of_match_table = sl28cpld_hwmon_of_match, + }, +}; +module_platform_driver(sl28cpld_hwmon_driver); + +MODULE_DESCRIPTION("sl28cpld Hardware Monitoring Driver"); +MODULE_AUTHOR("Michael Walle "); +MODULE_LICENSE("GPL"); From patchwork Mon Sep 14 21:43:37 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Michael Walle X-Patchwork-Id: 11775045 Return-Path: Received: from mail.kernel.org (pdx-korg-mail-1.web.codeaurora.org [172.30.200.123]) by pdx-korg-patchwork-2.web.codeaurora.org (Postfix) with ESMTP id 0CA1E92C for ; Mon, 14 Sep 2020 21:49:27 +0000 (UTC) Received: from merlin.infradead.org (merlin.infradead.org [205.233.59.134]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by mail.kernel.org (Postfix) with ESMTPS id CC449208DB for ; Mon, 14 Sep 2020 21:49:26 +0000 (UTC) Authentication-Results: mail.kernel.org; dkim=pass (2048-bit key) header.d=lists.infradead.org header.i=@lists.infradead.org header.b="mPr6ZNmN"; dkim=fail reason="signature verification failed" (1024-bit key) header.d=walle.cc header.i=@walle.cc header.b="k+Z15esp" DMARC-Filter: OpenDMARC Filter v1.3.2 mail.kernel.org CC449208DB Authentication-Results: mail.kernel.org; dmarc=none (p=none dis=none) header.from=walle.cc Authentication-Results: mail.kernel.org; spf=none smtp.mailfrom=linux-arm-kernel-bounces+patchwork-linux-arm=patchwork.kernel.org@lists.infradead.org DKIM-Signature: v=1; a=rsa-sha256; q=dns/txt; c=relaxed/relaxed; d=lists.infradead.org; s=merlin.20170209; h=Sender:Content-Transfer-Encoding: Content-Type:Cc:List-Subscribe:List-Help:List-Post:List-Archive: List-Unsubscribe:List-Id:MIME-Version:References:In-Reply-To:Message-Id:Date: Subject:To:From:Reply-To:Content-ID:Content-Description:Resent-Date: Resent-From:Resent-Sender:Resent-To:Resent-Cc:Resent-Message-ID:List-Owner; bh=/w+yGpSG6vha7Kx3tQ0MeBkrCjg5yxIjguOAF52A4r8=; b=mPr6ZNmNYq9LKdDTgiBuO4BL3 JwUDxf2CLB5eqv3J7tT+hrpUES0izMMWO/ig/nKNm4oaELrXDh0nlkdYb1jLd8vviLHIBXaQQCyXW hZ3j+jwNAT8uZnHdewf39KQV7vL8R9Vn8NCy3ZAaArxphltCk1beSOBe+oRE5yK3/b0ZC9wILT5D4 Oo1WKag0QxLCZZ2yRSfBQE5IIF63xUXw3VzOg8XVucnWMa9MjT+3ajTq3FO0eGq5ENZ3FL0hlpIhN Y+JviehXg9h1MsJofFwUqJM5dBdNOKib9Pf4lvUS5cZGQ8O00OThhEDdRVJeTcGW0p64msh7z06rN 8BzIBJgDA==; Received: from localhost ([::1] helo=merlin.infradead.org) by merlin.infradead.org with esmtp (Exim 4.92.3 #3 (Red Hat Linux)) id 1kHwJ2-0003QL-Oj; Mon, 14 Sep 2020 21:46:36 +0000 Received: from ssl.serverraum.org ([2a01:4f8:151:8464::1:2]) by merlin.infradead.org with esmtps (Exim 4.92.3 #3 (Red Hat Linux)) id 1kHwGk-0002SZ-EE for linux-arm-kernel@lists.infradead.org; Mon, 14 Sep 2020 21:44:18 +0000 Received: from apollo.fritz.box (unknown [IPv6:2a02:810c:c200:2e91:6257:18ff:fec4:ca34]) (using TLSv1.3 with cipher TLS_AES_256_GCM_SHA384 (256/256 bits) key-exchange ECDHE (P-384) server-signature RSA-PSS (2048 bits) server-digest SHA256) (No client certificate requested) by ssl.serverraum.org (Postfix) with ESMTPSA id 7BCFD23E46; Mon, 14 Sep 2020 23:44:05 +0200 (CEST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=walle.cc; s=mail2016061301; t=1600119846; h=from:from:reply-to:subject:subject:date:date:message-id:message-id: to:to:cc:cc:mime-version:mime-version: content-transfer-encoding:content-transfer-encoding: in-reply-to:in-reply-to:references:references; bh=Iz09yEaIotUUW9ZxSMQVQ3qjFt9unByjRjuLsExEEqo=; b=k+Z15espFVnXfzqSx3ydKPbb1OfTQNyrQY04BKt4v7u1A2MMx+a3uBLOHVEWLp6aBW5M5W IEs9/j7colrGgbv16GioH1PphtBHyPDZx9Uuy1gSo3Q9EGrNfDDDg/KHKyIqTjer1M1jR3 +dsq1wbCYRYqu38jvmU5eOHt1ozwWYw= From: Michael Walle To: linux-gpio@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-hwmon@vger.kernel.org, linux-pwm@vger.kernel.org, linux-watchdog@vger.kernel.org, linux-arm-kernel@lists.infradead.org Subject: [PATCH v10 09/13] arm64: dts: freescale: sl28: enable sl28cpld Date: Mon, 14 Sep 2020 23:43:37 +0200 Message-Id: <20200914214341.14268-10-michael@walle.cc> X-Mailer: git-send-email 2.20.1 In-Reply-To: <20200914214341.14268-1-michael@walle.cc> References: <20200914214341.14268-1-michael@walle.cc> MIME-Version: 1.0 X-Spam: Yes X-CRM114-Version: 20100106-BlameMichelson ( TRE 0.8.0 (BSD) ) MR-646709E3 X-CRM114-CacheID: sfid-20200914_174414_786804_2A9048E7 X-CRM114-Status: GOOD ( 13.86 ) X-Spam-Score: -2.5 (--) X-Spam-Report: SpamAssassin version 3.4.4 on merlin.infradead.org summary: Content analysis details: (-2.5 points) pts rule name description ---- ---------------------- -------------------------------------------------- -2.3 RCVD_IN_DNSWL_MED RBL: Sender listed at https://www.dnswl.org/, medium trust [2a01:4f8:151:8464:0:0:1:2 listed in] [list.dnswl.org] 0.0 SPF_HELO_NONE SPF: HELO does not publish an SPF Record -0.0 SPF_PASS SPF: sender matches SPF record -0.1 DKIM_VALID_EF Message has a valid DKIM or DK signature from envelope-from domain 0.1 DKIM_SIGNED Message has a DKIM or DK signature, not necessarily valid -0.1 DKIM_VALID_AU Message has a valid DKIM or DK signature from author's domain -0.1 DKIM_VALID Message has at least one valid DKIM or DK signature X-BeenThere: linux-arm-kernel@lists.infradead.org X-Mailman-Version: 2.1.29 Precedence: list List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Cc: Marc Zyngier , Jean Delvare , Catalin Marinas , Jason Cooper , Will Deacon , Greg Kroah-Hartman , Shawn Guo , Linus Walleij , Andy Shevchenko , Li Yang , Bartosz Golaszewski , Michael Walle , Rob Herring , Thierry Reding , Mark Brown , Pavel Machek , =?utf-8?q?Uwe_Kleine-K=C3=B6nig?= , Thomas Gleixner , Wim Van Sebroeck , Lee Jones , Guenter Roeck Sender: "linux-arm-kernel" Errors-To: linux-arm-kernel-bounces+patchwork-linux-arm=patchwork.kernel.org@lists.infradead.org Add the board management controller node. Signed-off-by: Michael Walle --- Changes since v9: - none Changes since v8: - none Changes since v7: - none Changes since v6: - renamed "sl28cpld-r1" to "sl28cpld" - moved "reg" and "compatible" properties to the top of a node Changes since v5: - none Changes since v4: - none Changes since v3: - see cover letter .../freescale/fsl-ls1028a-kontron-sl28.dts | 102 ++++++++++++++++++ 1 file changed, 102 insertions(+) diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28.dts index 852dad8d70ab..5fdf4ec8b39f 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28.dts @@ -8,6 +8,7 @@ /dts-v1/; #include "fsl-ls1028a.dtsi" +#include / { model = "Kontron SMARC-sAL28"; @@ -166,6 +167,107 @@ reg = <0x32>; }; + sl28cpld@4a { + compatible = "kontron,sl28cpld"; + reg = <0x4a>; + #address-cells = <1>; + #size-cells = <0>; + + watchdog@4 { + compatible = "kontron,sl28cpld-wdt"; + reg = <0x4>; + kontron,assert-wdt-timeout-pin; + }; + + hwmon@b { + compatible = "kontron,sl28cpld-fan"; + reg = <0xb>; + }; + + sl28cpld_pwm0: pwm@c { + compatible = "kontron,sl28cpld-pwm"; + reg = <0xc>; + #pwm-cells = <2>; + }; + + sl28cpld_pwm1: pwm@e { + compatible = "kontron,sl28cpld-pwm"; + reg = <0xe>; + #pwm-cells = <2>; + }; + + sl28cpld_gpio0: gpio@10 { + compatible = "kontron,sl28cpld-gpio"; + reg = <0x10>; + interrupts-extended = <&gpio2 6 + IRQ_TYPE_EDGE_FALLING>; + + gpio-controller; + #gpio-cells = <2>; + gpio-line-names = + "GPIO0_CAM0_PWR_N", "GPIO1_CAM1_PWR_N", + "GPIO2_CAM0_RST_N", "GPIO3_CAM1_RST_N", + "GPIO4_HDA_RST_N", "GPIO5_PWM_OUT", + "GPIO6_TACHIN", "GPIO7"; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + sl28cpld_gpio1: gpio@15 { + compatible = "kontron,sl28cpld-gpio"; + reg = <0x15>; + interrupts-extended = <&gpio2 6 + IRQ_TYPE_EDGE_FALLING>; + + gpio-controller; + #gpio-cells = <2>; + gpio-line-names = + "GPIO8", "GPIO9", "GPIO10", "GPIO11", + "", "", "", ""; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + sl28cpld_gpio2: gpio@1a { + compatible = "kontron,sl28cpld-gpo"; + reg = <0x1a>; + + gpio-controller; + #gpio-cells = <2>; + gpio-line-names = + "LCD0 voltage enable", + "LCD0 backlight enable", + "eMMC reset", "LVDS bridge reset", + "LVDS bridge power-down", + "SDIO power enable", + "", ""; + }; + + sl28cpld_gpio3: gpio@1b { + compatible = "kontron,sl28cpld-gpi"; + reg = <0x1b>; + + gpio-controller; + #gpio-cells = <2>; + gpio-line-names = + "Power button", "Force recovery", "Sleep", + "Battery low", "Lid state", "Charging", + "Charger present", ""; + }; + + sl28cpld_intc: interrupt-controller@1c { + compatible = "kontron,sl28cpld-intc"; + reg = <0x1c>; + interrupts-extended = <&gpio2 6 + IRQ_TYPE_EDGE_FALLING>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + eeprom@50 { compatible = "atmel,24c32"; reg = <0x50>; From patchwork Mon Sep 14 21:43:38 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Michael Walle X-Patchwork-Id: 11775035 Return-Path: Received: from mail.kernel.org (pdx-korg-mail-1.web.codeaurora.org [172.30.200.123]) by pdx-korg-patchwork-2.web.codeaurora.org (Postfix) with ESMTP id B720F6CA for ; Mon, 14 Sep 2020 21:47:18 +0000 (UTC) Received: from merlin.infradead.org (merlin.infradead.org [205.233.59.134]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by mail.kernel.org (Postfix) with ESMTPS id 8B5BA208DB for ; Mon, 14 Sep 2020 21:47:18 +0000 (UTC) Authentication-Results: mail.kernel.org; dkim=pass (2048-bit key) header.d=lists.infradead.org header.i=@lists.infradead.org header.b="qk+ySz7V"; dkim=fail reason="signature verification failed" (1024-bit key) header.d=walle.cc header.i=@walle.cc header.b="m3Y1PIBn" DMARC-Filter: OpenDMARC Filter v1.3.2 mail.kernel.org 8B5BA208DB Authentication-Results: mail.kernel.org; dmarc=none (p=none dis=none) header.from=walle.cc Authentication-Results: mail.kernel.org; spf=none smtp.mailfrom=linux-arm-kernel-bounces+patchwork-linux-arm=patchwork.kernel.org@lists.infradead.org DKIM-Signature: v=1; a=rsa-sha256; q=dns/txt; c=relaxed/relaxed; d=lists.infradead.org; s=merlin.20170209; h=Sender:Content-Transfer-Encoding: Content-Type:Cc:List-Subscribe:List-Help:List-Post:List-Archive: List-Unsubscribe:List-Id:MIME-Version:References:In-Reply-To:Message-Id:Date: Subject:To:From:Reply-To:Content-ID:Content-Description:Resent-Date: Resent-From:Resent-Sender:Resent-To:Resent-Cc:Resent-Message-ID:List-Owner; bh=+7Y23njmtRqZ6XBH4vIxr+7aBOIIRZPI18UiCTUhEPg=; b=qk+ySz7VG9lqZeldpgNxRAmVo iO/3g3wbH7duRlTRm5Ko5NKnSJQneW/GiSv6u8uAvbnCwhesxMx3/AGVYckyxJglGSqKUjles1wWV ScyIEXAtNqFxhRSCZQ1wg3dOURxAB1xBMNkhlGyoy4ex35TD1VEdu4ofHE8ptG1UNwP95BpUIWZLs fKPwHSBptYAmE06w+O+OHLhruTUxG+yXDNfb2/zyqwWDZpOKWlqA1BY3ABRGrUNUzomdWZK/h6wgt lWCYtqeWMvCuJCDgLb0zcsUy2BeVKwnfFn6bCiEXZdlTQMEYZCT6x8mmKerz4KCpMGNO47eZMgXGq 9Tqc7YxFw==; Received: from localhost ([::1] helo=merlin.infradead.org) by merlin.infradead.org with esmtp (Exim 4.92.3 #3 (Red Hat Linux)) id 1kHwJH-0003ZF-Th; Mon, 14 Sep 2020 21:46:52 +0000 Received: from ssl.serverraum.org ([2a01:4f8:151:8464::1:2]) by merlin.infradead.org with esmtps (Exim 4.92.3 #3 (Red Hat Linux)) id 1kHwGk-0002SY-EF for linux-arm-kernel@lists.infradead.org; Mon, 14 Sep 2020 21:44:18 +0000 Received: from apollo.fritz.box (unknown [IPv6:2a02:810c:c200:2e91:6257:18ff:fec4:ca34]) (using TLSv1.3 with cipher TLS_AES_256_GCM_SHA384 (256/256 bits) key-exchange ECDHE (P-384) server-signature RSA-PSS (2048 bits) server-digest SHA256) (No client certificate requested) by ssl.serverraum.org (Postfix) with ESMTPSA id 94C2723E47; Mon, 14 Sep 2020 23:44:06 +0200 (CEST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=walle.cc; s=mail2016061301; t=1600119847; h=from:from:reply-to:subject:subject:date:date:message-id:message-id: to:to:cc:cc:mime-version:mime-version: content-transfer-encoding:content-transfer-encoding: in-reply-to:in-reply-to:references:references; bh=Z+VVp1S1/1mEp4bh4MChiZeax7qY5irCWr9wzBp6vkg=; b=m3Y1PIBnAJ7ZfyFUZboU6MLBZZDJXJspu+LTPNMyNz4ajDAdQbjof3iwju3FBcbgGdxPxP 7YJO69Dx551zJPh21R22e57XZvJBwWbGllumHe7aqly8EIR/gJwEeJW8kvgW/rJRFLRSSz Sr78xtxAfdER3VpJkyHO4enZOiPN9VA= From: Michael Walle To: linux-gpio@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-hwmon@vger.kernel.org, linux-pwm@vger.kernel.org, linux-watchdog@vger.kernel.org, linux-arm-kernel@lists.infradead.org Subject: [PATCH v10 10/13] arm64: dts: freescale: sl28: map GPIOs to input events Date: Mon, 14 Sep 2020 23:43:38 +0200 Message-Id: <20200914214341.14268-11-michael@walle.cc> X-Mailer: git-send-email 2.20.1 In-Reply-To: <20200914214341.14268-1-michael@walle.cc> References: <20200914214341.14268-1-michael@walle.cc> MIME-Version: 1.0 X-Spam: Yes X-CRM114-Version: 20100106-BlameMichelson ( TRE 0.8.0 (BSD) ) MR-646709E3 X-CRM114-CacheID: sfid-20200914_174414_743312_7D497AB1 X-CRM114-Status: GOOD ( 15.18 ) X-Spam-Score: -2.5 (--) X-Spam-Report: SpamAssassin version 3.4.4 on merlin.infradead.org summary: Content analysis details: (-2.5 points) pts rule name description ---- ---------------------- -------------------------------------------------- -2.3 RCVD_IN_DNSWL_MED RBL: Sender listed at https://www.dnswl.org/, medium trust [2a01:4f8:151:8464:0:0:1:2 listed in] [list.dnswl.org] 0.0 SPF_HELO_NONE SPF: HELO does not publish an SPF Record -0.0 SPF_PASS SPF: sender matches SPF record -0.1 DKIM_VALID_EF Message has a valid DKIM or DK signature from envelope-from domain 0.1 DKIM_SIGNED Message has a DKIM or DK signature, not necessarily valid -0.1 DKIM_VALID_AU Message has a valid DKIM or DK signature from author's domain -0.1 DKIM_VALID Message has at least one valid DKIM or DK signature X-BeenThere: linux-arm-kernel@lists.infradead.org X-Mailman-Version: 2.1.29 Precedence: list List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Cc: Marc Zyngier , Jean Delvare , Catalin Marinas , Jason Cooper , Will Deacon , Greg Kroah-Hartman , Shawn Guo , Linus Walleij , Andy Shevchenko , Li Yang , Bartosz Golaszewski , Michael Walle , Rob Herring , Thierry Reding , Mark Brown , Pavel Machek , =?utf-8?q?Uwe_Kleine-K=C3=B6nig?= , Thomas Gleixner , Wim Van Sebroeck , Lee Jones , Guenter Roeck Sender: "linux-arm-kernel" Errors-To: linux-arm-kernel-bounces+patchwork-linux-arm=patchwork.kernel.org@lists.infradead.org Now that we have support for GPIO lines of the SMARC connector, map the sleep, power and lid switch signals to the corresponding keys using the gpio-keys and gpio-keys-polled drivers. The power and sleep signals have dedicated interrupts, thus we use these ones. The lid switch is just mapped to a GPIO input and needs polling. Signed-off-by: Michael Walle --- Changes since v9: - none Changes since v8: - none Changes since v7: - none Changes since v6: - none Changes since v5: - none Changes since v4: - none Changes since v3: - see cover letter .../freescale/fsl-ls1028a-kontron-sl28.dts | 32 +++++++++++++++++++ 1 file changed, 32 insertions(+) diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28.dts index 5fdf4ec8b39f..f46eb47cfa4d 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28.dts @@ -9,6 +9,8 @@ /dts-v1/; #include "fsl-ls1028a.dtsi" #include +#include +#include / { model = "Kontron SMARC-sAL28"; @@ -23,6 +25,36 @@ spi1 = &dspi2; }; + buttons0 { + compatible = "gpio-keys"; + + power-button { + interrupts-extended = <&sl28cpld_intc + 4 IRQ_TYPE_EDGE_BOTH>; + linux,code = ; + label = "Power"; + }; + + sleep-button { + interrupts-extended = <&sl28cpld_intc + 5 IRQ_TYPE_EDGE_BOTH>; + linux,code = ; + label = "Sleep"; + }; + }; + + buttons1 { + compatible = "gpio-keys-polled"; + poll-interval = <200>; + + lid-switch { + linux,input-type = ; + linux,code = ; + gpios = <&sl28cpld_gpio3 4 GPIO_ACTIVE_LOW>; + label = "Lid"; + }; + }; + chosen { stdout-path = "serial0:115200n8"; }; From patchwork Mon Sep 14 21:43:39 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Michael Walle X-Patchwork-Id: 11775031 Return-Path: Received: from mail.kernel.org (pdx-korg-mail-1.web.codeaurora.org [172.30.200.123]) by pdx-korg-patchwork-2.web.codeaurora.org (Postfix) with ESMTP id D76A16CA for ; Mon, 14 Sep 2020 21:46:39 +0000 (UTC) Received: from merlin.infradead.org (merlin.infradead.org [205.233.59.134]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by mail.kernel.org (Postfix) with ESMTPS id 9C37A20759 for ; Mon, 14 Sep 2020 21:46:39 +0000 (UTC) Authentication-Results: mail.kernel.org; dkim=pass (2048-bit key) header.d=lists.infradead.org header.i=@lists.infradead.org header.b="iZX0qNVB"; dkim=fail reason="signature verification failed" (1024-bit key) header.d=walle.cc header.i=@walle.cc header.b="E9U+o0UW" DMARC-Filter: OpenDMARC Filter v1.3.2 mail.kernel.org 9C37A20759 Authentication-Results: mail.kernel.org; dmarc=none (p=none dis=none) header.from=walle.cc Authentication-Results: mail.kernel.org; spf=none smtp.mailfrom=linux-arm-kernel-bounces+patchwork-linux-arm=patchwork.kernel.org@lists.infradead.org DKIM-Signature: v=1; a=rsa-sha256; q=dns/txt; c=relaxed/relaxed; d=lists.infradead.org; s=merlin.20170209; h=Sender:Content-Transfer-Encoding: Content-Type:Cc:List-Subscribe:List-Help:List-Post:List-Archive: List-Unsubscribe:List-Id:MIME-Version:References:In-Reply-To:Message-Id:Date: Subject:To:From:Reply-To:Content-ID:Content-Description:Resent-Date: Resent-From:Resent-Sender:Resent-To:Resent-Cc:Resent-Message-ID:List-Owner; bh=LZ5hjwJluvT3gv57xKnyOzxECHBkSf8s8EUBQIhoYmY=; b=iZX0qNVB/W99BGhOICoceySpZ 6oDPOOGM+Kuu0tdQ36eXLnQ7vyplDmvlwaVdRY/MfLfZrNtvr4fkih1MxG6YRqIXlT9Q30ov50rvy gdYhICnEJre/8OiPXNHr94fr53+B4FK1bBkyDnyi+d3zhxoPb5LiXAaSmsRGtb+enXhUAG7zbJusn hEdJ5ehKlTiiBT9krLuW2+7nEPQ3/reZIdM+ANz2K38WqsMHafTGO70lnkfjPZozIJK+qf9L2adJd d0rmJnFTBhog0jS/5UgZT8oJroN1u4Sl6K/gjgewcFu3HwjEJB3ZOw3P3XlcDyKjM/i+EWJRB7aEh fukXlQtig==; Received: from localhost ([::1] helo=merlin.infradead.org) by merlin.infradead.org with esmtp (Exim 4.92.3 #3 (Red Hat Linux)) id 1kHwIg-0003EV-QB; Mon, 14 Sep 2020 21:46:15 +0000 Received: from ssl.serverraum.org ([2a01:4f8:151:8464::1:2]) by merlin.infradead.org with esmtps (Exim 4.92.3 #3 (Red Hat Linux)) id 1kHwGk-0002Sa-EO for linux-arm-kernel@lists.infradead.org; Mon, 14 Sep 2020 21:44:18 +0000 Received: from apollo.fritz.box (unknown [IPv6:2a02:810c:c200:2e91:6257:18ff:fec4:ca34]) (using TLSv1.3 with cipher TLS_AES_256_GCM_SHA384 (256/256 bits) key-exchange ECDHE (P-384) server-signature RSA-PSS (2048 bits) server-digest SHA256) (No client certificate requested) by ssl.serverraum.org (Postfix) with ESMTPSA id 5444723E4A; Mon, 14 Sep 2020 23:44:07 +0200 (CEST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=walle.cc; s=mail2016061301; t=1600119847; h=from:from:reply-to:subject:subject:date:date:message-id:message-id: to:to:cc:cc:mime-version:mime-version: content-transfer-encoding:content-transfer-encoding: in-reply-to:in-reply-to:references:references; bh=R8b1z+iGFiRGQhOIFM3diNO1SOWmPlbWlOSVAJR1ANI=; b=E9U+o0UWfl6a5fOImDoxr/uVfKVXQKLTX2clptY/xn/AHBPEUSW7cJLp09xdp7Pk3/BcQK EG4jlwPlmePHPccQmCKVlg0ruZv/0gAubjBy6OvOzRwET4rk1hzqA3y3OoaBQaxxg/lSWP CdcDybfvjsVmatJdBXCd03CvB2rEofY= From: Michael Walle To: linux-gpio@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-hwmon@vger.kernel.org, linux-pwm@vger.kernel.org, linux-watchdog@vger.kernel.org, linux-arm-kernel@lists.infradead.org Subject: [PATCH v10 11/13] arm64: dts: freescale: sl28: enable LED support Date: Mon, 14 Sep 2020 23:43:39 +0200 Message-Id: <20200914214341.14268-12-michael@walle.cc> X-Mailer: git-send-email 2.20.1 In-Reply-To: <20200914214341.14268-1-michael@walle.cc> References: <20200914214341.14268-1-michael@walle.cc> MIME-Version: 1.0 X-Spam: Yes X-CRM114-Version: 20100106-BlameMichelson ( TRE 0.8.0 (BSD) ) MR-646709E3 X-CRM114-CacheID: sfid-20200914_174414_745890_A3469C54 X-CRM114-Status: GOOD ( 16.86 ) X-Spam-Score: -2.5 (--) X-Spam-Report: SpamAssassin version 3.4.4 on merlin.infradead.org summary: Content analysis details: (-2.5 points) pts rule name description ---- ---------------------- -------------------------------------------------- -2.3 RCVD_IN_DNSWL_MED RBL: Sender listed at https://www.dnswl.org/, medium trust [2a01:4f8:151:8464:0:0:1:2 listed in] [list.dnswl.org] 0.0 SPF_HELO_NONE SPF: HELO does not publish an SPF Record -0.0 SPF_PASS SPF: sender matches SPF record -0.1 DKIM_VALID_EF Message has a valid DKIM or DK signature from envelope-from domain 0.1 DKIM_SIGNED Message has a DKIM or DK signature, not necessarily valid -0.1 DKIM_VALID_AU Message has a valid DKIM or DK signature from author's domain -0.1 DKIM_VALID Message has at least one valid DKIM or DK signature X-BeenThere: linux-arm-kernel@lists.infradead.org X-Mailman-Version: 2.1.29 Precedence: list List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Cc: Marc Zyngier , Jean Delvare , Catalin Marinas , Jason Cooper , Will Deacon , Greg Kroah-Hartman , Shawn Guo , Linus Walleij , Andy Shevchenko , Li Yang , Bartosz Golaszewski , Michael Walle , Rob Herring , Thierry Reding , Mark Brown , Pavel Machek , =?utf-8?q?Uwe_Kleine-K=C3=B6nig?= , Thomas Gleixner , Wim Van Sebroeck , Lee Jones , Guenter Roeck Sender: "linux-arm-kernel" Errors-To: linux-arm-kernel-bounces+patchwork-linux-arm=patchwork.kernel.org@lists.infradead.org Now that we have support for GPIO lines of the SMARC connector, enable LED support on the KBox A-230-LS. There are two LEDs without fixed functions, one is yellow and one is green. Unfortunately, it is just one multi-color LED, thus while it is possible to enable both at the same time it is hard to tell the difference between "yellow only" and "yellow and green". Signed-off-by: Michael Walle Acked-by: Pavel Machek --- Changes since v9: - none Changes since v8: - none Changes since v7: - use new "function" and "color" properties instead of a label - added default-on trigger for the power-led Changes since v6: - none Changes since v5: - changed the label, suggested by Pavel Machek Changes since v4: - none Changes since v3: - see cover letter .../fsl-ls1028a-kontron-kbox-a-230-ls.dts | 18 ++++++++++++++++++ 1 file changed, 18 insertions(+) diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-kbox-a-230-ls.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-kbox-a-230-ls.dts index 4b4cc6a1573d..dd516c0efd8b 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-kbox-a-230-ls.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-kbox-a-230-ls.dts @@ -11,11 +11,29 @@ /dts-v1/; #include "fsl-ls1028a-kontron-sl28-var4.dts" +#include / { model = "Kontron KBox A-230-LS"; compatible = "kontron,kbox-a-230-ls", "kontron,sl28-var4", "kontron,sl28", "fsl,ls1028a"; + + leds { + compatible = "gpio-leds"; + + alarm-led { + function = LED_FUNCTION_ALARM; + color = ; + gpios = <&sl28cpld_gpio0 0 0>; + }; + + power-led { + linux,default-trigger = "default-on"; + function = LED_FUNCTION_POWER; + color = ; + gpios = <&sl28cpld_gpio1 3 0>; + }; + }; }; &enetc_mdio_pf3 { From patchwork Mon Sep 14 21:43:40 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Michael Walle X-Patchwork-Id: 11775043 Return-Path: Received: from mail.kernel.org (pdx-korg-mail-1.web.codeaurora.org [172.30.200.123]) by pdx-korg-patchwork-2.web.codeaurora.org (Postfix) with ESMTP id E38846CA for ; Mon, 14 Sep 2020 21:48:26 +0000 (UTC) Received: from merlin.infradead.org (merlin.infradead.org [205.233.59.134]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by mail.kernel.org (Postfix) with ESMTPS id AEA23208DB for ; Mon, 14 Sep 2020 21:48:26 +0000 (UTC) Authentication-Results: mail.kernel.org; dkim=pass (2048-bit key) header.d=lists.infradead.org header.i=@lists.infradead.org header.b="dzoV3bQJ"; dkim=fail reason="signature verification failed" (1024-bit key) header.d=walle.cc header.i=@walle.cc header.b="S+9z4qAN" DMARC-Filter: OpenDMARC Filter v1.3.2 mail.kernel.org AEA23208DB Authentication-Results: mail.kernel.org; dmarc=none (p=none dis=none) header.from=walle.cc Authentication-Results: mail.kernel.org; spf=none smtp.mailfrom=linux-arm-kernel-bounces+patchwork-linux-arm=patchwork.kernel.org@lists.infradead.org DKIM-Signature: v=1; a=rsa-sha256; q=dns/txt; c=relaxed/relaxed; d=lists.infradead.org; s=merlin.20170209; h=Sender:Content-Transfer-Encoding: Content-Type:Cc:List-Subscribe:List-Help:List-Post:List-Archive: List-Unsubscribe:List-Id:MIME-Version:References:In-Reply-To:Message-Id:Date: Subject:To:From:Reply-To:Content-ID:Content-Description:Resent-Date: Resent-From:Resent-Sender:Resent-To:Resent-Cc:Resent-Message-ID:List-Owner; bh=my1J3zGcY5B02HcZzgXRfqR8WJEX30MP2vupxZbA35E=; b=dzoV3bQJGUQYjVeJdU0xNfGk8 ps28GxZSWWWM5K8A7F1n7xAB/HOTKiBxb2kOyociKIDn0KFCGTNco9okcooLaIxswp7ncC/xwmOcC 7E9vqV1pFpRjMUYpjh6u17F/korvuX1taEjckn5h5okCX521jxzTMfnAtwVx+bayPyMFQEwkILN0Q 1ZjcW8++iX1Tea6pp6gFg1mZ9cEhiLg5LRgP0aEwmxYBxUCyd9Ks7em0yvoK3mok9ZokhWBlyBqFY MtIcDB0GKHzMTdc5jvwjscScE8xiYbU+tF7npfJL216yC9L8R5MObdOE57+B4SJPB2ZoQpoJ7FOUw uC/dGE4dw==; Received: from localhost ([::1] helo=merlin.infradead.org) by merlin.infradead.org with esmtp (Exim 4.92.3 #3 (Red Hat Linux)) id 1kHwIQ-000365-Hk; Mon, 14 Sep 2020 21:45:58 +0000 Received: from ssl.serverraum.org ([2a01:4f8:151:8464::1:2]) by merlin.infradead.org with esmtps (Exim 4.92.3 #3 (Red Hat Linux)) id 1kHwGk-0002Sb-EM for linux-arm-kernel@lists.infradead.org; Mon, 14 Sep 2020 21:44:16 +0000 Received: from apollo.fritz.box (unknown [IPv6:2a02:810c:c200:2e91:6257:18ff:fec4:ca34]) (using TLSv1.3 with cipher TLS_AES_256_GCM_SHA384 (256/256 bits) key-exchange ECDHE (P-384) server-signature RSA-PSS (2048 bits) server-digest SHA256) (No client certificate requested) by ssl.serverraum.org (Postfix) with ESMTPSA id 6F16E23E4B; Mon, 14 Sep 2020 23:44:08 +0200 (CEST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=walle.cc; s=mail2016061301; t=1600119849; h=from:from:reply-to:subject:subject:date:date:message-id:message-id: to:to:cc:cc:mime-version:mime-version: content-transfer-encoding:content-transfer-encoding: in-reply-to:in-reply-to:references:references; bh=sNocba8+HwhSs/8zbmQak0u0rgx3kaQVWINIqqQTojc=; b=S+9z4qANEQ3jdGS8IFznIdKFyRlAHorqbYED/c7PIvwgkU9MhACopvEEL6saZxegN8UP+l hY+63WFlrZOQukNTr/lmazouCoXNxYryudZxbC4FNZP4VIeOqvhcnr7qH3eH4XD4zWnDHo XVTTtICWy13uhcuuo+FpF+0DLJYuybE= From: Michael Walle To: linux-gpio@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-hwmon@vger.kernel.org, linux-pwm@vger.kernel.org, linux-watchdog@vger.kernel.org, linux-arm-kernel@lists.infradead.org Subject: [PATCH v10 12/13] arm64: dts: freescale: sl28: enable fan support Date: Mon, 14 Sep 2020 23:43:40 +0200 Message-Id: <20200914214341.14268-13-michael@walle.cc> X-Mailer: git-send-email 2.20.1 In-Reply-To: <20200914214341.14268-1-michael@walle.cc> References: <20200914214341.14268-1-michael@walle.cc> MIME-Version: 1.0 X-Spam: Yes X-CRM114-Version: 20100106-BlameMichelson ( TRE 0.8.0 (BSD) ) MR-646709E3 X-CRM114-CacheID: sfid-20200914_174414_741678_40B1B237 X-CRM114-Status: GOOD ( 14.98 ) X-Spam-Score: -2.5 (--) X-Spam-Report: SpamAssassin version 3.4.4 on merlin.infradead.org summary: Content analysis details: (-2.5 points) pts rule name description ---- ---------------------- -------------------------------------------------- -2.3 RCVD_IN_DNSWL_MED RBL: Sender listed at https://www.dnswl.org/, medium trust [2a01:4f8:151:8464:0:0:1:2 listed in] [list.dnswl.org] 0.0 SPF_HELO_NONE SPF: HELO does not publish an SPF Record -0.0 SPF_PASS SPF: sender matches SPF record -0.1 DKIM_VALID_EF Message has a valid DKIM or DK signature from envelope-from domain 0.1 DKIM_SIGNED Message has a DKIM or DK signature, not necessarily valid -0.1 DKIM_VALID_AU Message has a valid DKIM or DK signature from author's domain -0.1 DKIM_VALID Message has at least one valid DKIM or DK signature X-BeenThere: linux-arm-kernel@lists.infradead.org X-Mailman-Version: 2.1.29 Precedence: list List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Cc: Marc Zyngier , Jean Delvare , Catalin Marinas , Jason Cooper , Will Deacon , Greg Kroah-Hartman , Shawn Guo , Linus Walleij , Andy Shevchenko , Li Yang , Bartosz Golaszewski , Michael Walle , Rob Herring , Thierry Reding , Mark Brown , Pavel Machek , =?utf-8?q?Uwe_Kleine-K=C3=B6nig?= , Thomas Gleixner , Wim Van Sebroeck , Lee Jones , Guenter Roeck Sender: "linux-arm-kernel" Errors-To: linux-arm-kernel-bounces+patchwork-linux-arm=patchwork.kernel.org@lists.infradead.org Add a pwm-fan mapped to the PWM channel 0 which is connected to the fan connector of the carrier. Signed-off-by: Michael Walle --- Changes since v9: - none Changes since v8: - none Changes since v7: - none Changes since v6: - none Changes since v5: - none Changes since v4: - none Changes since v3: - see cover letter .../dts/freescale/fsl-ls1028a-kontron-sl28-var3-ads2.dts | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var3-ads2.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var3-ads2.dts index 0973a6a45217..c45d7b40e374 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var3-ads2.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var3-ads2.dts @@ -15,6 +15,15 @@ compatible = "kontron,sl28-var3-ads2", "kontron,sl28-var3", "kontron,sl28", "fsl,ls1028a"; + pwm-fan { + compatible = "pwm-fan"; + cooling-min-state = <0>; + cooling-max-state = <3>; + #cooling-cells = <2>; + pwms = <&sl28cpld_pwm0 0 4000000>; + cooling-levels = <1 128 192 255>; + }; + sound { #address-cells = <1>; #size-cells = <0>; From patchwork Mon Sep 14 21:43:41 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Michael Walle X-Patchwork-Id: 11775017 Return-Path: Received: from mail.kernel.org (pdx-korg-mail-1.web.codeaurora.org [172.30.200.123]) by pdx-korg-patchwork-2.web.codeaurora.org (Postfix) with ESMTP id 9CAF992C for ; Mon, 14 Sep 2020 21:46:03 +0000 (UTC) Received: from merlin.infradead.org (merlin.infradead.org [205.233.59.134]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by mail.kernel.org (Postfix) with ESMTPS id 658A820E65 for ; Mon, 14 Sep 2020 21:46:03 +0000 (UTC) Authentication-Results: mail.kernel.org; dkim=pass (2048-bit key) header.d=lists.infradead.org header.i=@lists.infradead.org header.b="YRI63xZI"; dkim=fail reason="signature verification failed" (1024-bit key) header.d=walle.cc header.i=@walle.cc header.b="bey4KerF" DMARC-Filter: OpenDMARC Filter v1.3.2 mail.kernel.org 658A820E65 Authentication-Results: mail.kernel.org; dmarc=none (p=none dis=none) header.from=walle.cc Authentication-Results: mail.kernel.org; spf=none smtp.mailfrom=linux-arm-kernel-bounces+patchwork-linux-arm=patchwork.kernel.org@lists.infradead.org DKIM-Signature: v=1; a=rsa-sha256; q=dns/txt; c=relaxed/relaxed; d=lists.infradead.org; s=merlin.20170209; h=Sender:Content-Transfer-Encoding: Content-Type:Cc:List-Subscribe:List-Help:List-Post:List-Archive: List-Unsubscribe:List-Id:MIME-Version:References:In-Reply-To:Message-Id:Date: Subject:To:From:Reply-To:Content-ID:Content-Description:Resent-Date: Resent-From:Resent-Sender:Resent-To:Resent-Cc:Resent-Message-ID:List-Owner; bh=dlG2j5wdSdVJ/IwVkRredsl0mLdrjQyAAh09/xKMEA8=; b=YRI63xZIH97IGqBU6q3PRCar4 00SQY6kCVGhsIU1n86cW8p4eFMvdSlOlH6sq0Q2MVF3KIORH7rv52ak8hkrFZG1Ypu4VrqZZeX5Jf Dde+/gDE2SU7r0IQI3zrfzldCGC6f0CEId+F5RRBDiXSPvPOnRAAJdES+UrIJ+m/PAfQcyFl17lSA u5UmGZtcb1/4RBpaKp4TjJ/2UQpFQ8+hBC953IQFYtcnui47GSq8bNKcfeSn2ZJOiqDrxZCclq+7j vQ9MKCMN7in4C8HgF+Roz3C0ioigbkCySOiCosFZzHaEYqGk6aPNpaTnETXuFCjs0mZmAbIFjm+Dv 6Pb6YX6OA==; Received: from localhost ([::1] helo=merlin.infradead.org) by merlin.infradead.org with esmtp (Exim 4.92.3 #3 (Red Hat Linux)) id 1kHwIB-00030r-1A; Mon, 14 Sep 2020 21:45:43 +0000 Received: from ssl.serverraum.org ([176.9.125.105]) by merlin.infradead.org with esmtps (Exim 4.92.3 #3 (Red Hat Linux)) id 1kHwGk-0002Sc-DA for linux-arm-kernel@lists.infradead.org; Mon, 14 Sep 2020 21:44:16 +0000 Received: from apollo.fritz.box (unknown [IPv6:2a02:810c:c200:2e91:6257:18ff:fec4:ca34]) (using TLSv1.3 with cipher TLS_AES_256_GCM_SHA384 (256/256 bits) key-exchange ECDHE (P-384) server-signature RSA-PSS (2048 bits) server-digest SHA256) (No client certificate requested) by ssl.serverraum.org (Postfix) with ESMTPSA id 2A25923E4C; Mon, 14 Sep 2020 23:44:09 +0200 (CEST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=walle.cc; s=mail2016061301; t=1600119849; h=from:from:reply-to:subject:subject:date:date:message-id:message-id: to:to:cc:cc:mime-version:mime-version: content-transfer-encoding:content-transfer-encoding: in-reply-to:in-reply-to:references:references; bh=p5We/KRQicU22waTdBcUF4kbV8vyQwKFNG5VkQR8ubs=; b=bey4KerF59JHv5RHlPeV/f3KxPIjjYCVgSt5+uTYmvZENe6S9owIfNX+RCu1bB45KaHh1O 79L8lJ6NAIVe/JbPj2igdIYMzNqLDAGifU52I5lPcRYg3FxDfkbMdR/KcI/BC2eVG+inMz DXACX/KZF7NW09UcEoOhw58Fklxwo6M= From: Michael Walle To: linux-gpio@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-hwmon@vger.kernel.org, linux-pwm@vger.kernel.org, linux-watchdog@vger.kernel.org, linux-arm-kernel@lists.infradead.org Subject: [PATCH v10 13/13] arm64: defconfig: enable the sl28cpld board management controller Date: Mon, 14 Sep 2020 23:43:41 +0200 Message-Id: <20200914214341.14268-14-michael@walle.cc> X-Mailer: git-send-email 2.20.1 In-Reply-To: <20200914214341.14268-1-michael@walle.cc> References: <20200914214341.14268-1-michael@walle.cc> MIME-Version: 1.0 X-Spam: Yes X-CRM114-Version: 20100106-BlameMichelson ( TRE 0.8.0 (BSD) ) MR-646709E3 X-CRM114-CacheID: sfid-20200914_174414_681992_E0755B22 X-CRM114-Status: GOOD ( 14.35 ) X-Spam-Score: -1.7 (-) X-Spam-Report: SpamAssassin version 3.4.4 on merlin.infradead.org summary: Content analysis details: (-1.7 points) pts rule name description ---- ---------------------- -------------------------------------------------- -2.3 RCVD_IN_DNSWL_MED RBL: Sender listed at https://www.dnswl.org/, medium trust [176.9.125.105 listed in list.dnswl.org] 0.0 SPF_HELO_NONE SPF: HELO does not publish an SPF Record -0.0 SPF_PASS SPF: sender matches SPF record -0.1 DKIM_VALID_EF Message has a valid DKIM or DK signature from envelope-from domain 0.1 DKIM_SIGNED Message has a DKIM or DK signature, not necessarily valid -0.1 DKIM_VALID_AU Message has a valid DKIM or DK signature from author's domain -0.1 DKIM_VALID Message has at least one valid DKIM or DK signature 0.8 UPPERCASE_50_75 message body is 50-75% uppercase X-BeenThere: linux-arm-kernel@lists.infradead.org X-Mailman-Version: 2.1.29 Precedence: list List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Cc: Marc Zyngier , Jean Delvare , Catalin Marinas , Jason Cooper , Will Deacon , Greg Kroah-Hartman , Shawn Guo , Linus Walleij , Andy Shevchenko , Li Yang , Bartosz Golaszewski , Michael Walle , Rob Herring , Thierry Reding , Mark Brown , Pavel Machek , =?utf-8?q?Uwe_Kleine-K=C3=B6nig?= , Thomas Gleixner , Wim Van Sebroeck , Lee Jones , Guenter Roeck Sender: "linux-arm-kernel" Errors-To: linux-arm-kernel-bounces+patchwork-linux-arm=patchwork.kernel.org@lists.infradead.org Enable the kernel modules for the board management controller "sl28cpld" which is used on the SMARC-sAL28 board. Signed-off-by: Michael Walle --- Changes since v9: - none Changes since v8: - none Changes since v7: - added new virtual symbol CONFIG_MFD_SL28CPLD Changes since v6: - none Changes since v5: - new patch arch/arm64/configs/defconfig | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig index 63003ec116ee..6b410dec4447 100644 --- a/arch/arm64/configs/defconfig +++ b/arch/arm64/configs/defconfig @@ -510,6 +510,7 @@ CONFIG_GPIO_PCA953X=y CONFIG_GPIO_PCA953X_IRQ=y CONFIG_GPIO_BD9571MWV=m CONFIG_GPIO_MAX77620=y +CONFIG_GPIO_SL28CPLD=m CONFIG_POWER_AVS=y CONFIG_QCOM_CPR=y CONFIG_ROCKCHIP_IODOMAIN=y @@ -523,6 +524,7 @@ CONFIG_SENSORS_ARM_SCPI=y CONFIG_SENSORS_LM90=m CONFIG_SENSORS_PWM_FAN=m CONFIG_SENSORS_RASPBERRYPI_HWMON=m +CONFIG_SENSORS_SL28CPLD=m CONFIG_SENSORS_INA2XX=m CONFIG_SENSORS_INA3221=m CONFIG_THERMAL_GOV_POWER_ALLOCATOR=y @@ -545,6 +547,7 @@ CONFIG_QCOM_TSENS=y CONFIG_QCOM_SPMI_TEMP_ALARM=m CONFIG_UNIPHIER_THERMAL=y CONFIG_WATCHDOG=y +CONFIG_SL28CPLD_WATCHDOG=m CONFIG_ARM_SP805_WATCHDOG=y CONFIG_ARM_SBSA_WATCHDOG=y CONFIG_ARM_SMC_WATCHDOG=y @@ -570,6 +573,7 @@ CONFIG_MFD_MAX77620=y CONFIG_MFD_SPMI_PMIC=y CONFIG_MFD_RK808=y CONFIG_MFD_SEC_CORE=y +CONFIG_MFD_SL28CPLD=y CONFIG_MFD_ROHM_BD718XX=y CONFIG_MFD_WCD934X=m CONFIG_REGULATOR_FIXED_VOLTAGE=y @@ -971,8 +975,10 @@ CONFIG_PWM_MESON=m CONFIG_PWM_RCAR=m CONFIG_PWM_ROCKCHIP=y CONFIG_PWM_SAMSUNG=y +CONFIG_PWM_SL28CPLD=m CONFIG_PWM_SUN4I=m CONFIG_PWM_TEGRA=m +CONFIG_SL28CPLD_INTC=y CONFIG_QCOM_PDC=y CONFIG_RESET_IMX7=y CONFIG_RESET_QCOM_AOSS=y