From patchwork Thu Oct 8 13:05:13 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Lars Povlsen X-Patchwork-Id: 11822935 Return-Path: Received: from mail.kernel.org (pdx-korg-mail-1.web.codeaurora.org [172.30.200.123]) by pdx-korg-patchwork-2.web.codeaurora.org (Postfix) with ESMTP id 9CE036CA for ; Thu, 8 Oct 2020 13:05:53 +0000 (UTC) Received: from merlin.infradead.org (merlin.infradead.org [205.233.59.134]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by mail.kernel.org (Postfix) with ESMTPS id 58E272083B for ; Thu, 8 Oct 2020 13:05:53 +0000 (UTC) Authentication-Results: mail.kernel.org; dkim=pass (2048-bit key) header.d=lists.infradead.org header.i=@lists.infradead.org header.b="WF1pDcry"; dkim=fail reason="signature verification failed" (2048-bit key) header.d=microchip.com header.i=@microchip.com header.b="comevx5u" DMARC-Filter: OpenDMARC Filter v1.3.2 mail.kernel.org 58E272083B Authentication-Results: mail.kernel.org; dmarc=fail (p=quarantine dis=none) header.from=microchip.com Authentication-Results: mail.kernel.org; spf=none smtp.mailfrom=linux-arm-kernel-bounces+patchwork-linux-arm=patchwork.kernel.org@lists.infradead.org DKIM-Signature: v=1; a=rsa-sha256; q=dns/txt; c=relaxed/relaxed; d=lists.infradead.org; s=merlin.20170209; h=Sender:Content-Transfer-Encoding: Content-Type:Cc:List-Subscribe:List-Help:List-Post:List-Archive: List-Unsubscribe:List-Id:MIME-Version:References:In-Reply-To:Message-ID:Date: Subject:To:From:Reply-To:Content-ID:Content-Description:Resent-Date: Resent-From:Resent-Sender:Resent-To:Resent-Cc:Resent-Message-ID:List-Owner; bh=CEvQ67yJgYuix3jAwN9QoahcwBF1CNRUJeHDwjOMn7k=; b=WF1pDcry+2ID6OyksgoRAnoqp 88P4AynHHgiT9h5Sk4uaxtC2FkyDMluZTVzBVuLESy+pCDsxRnYoxchyKUhMTQk1A2Jt9UArSPrHo 8zg2hLnouqc/XfcvF9LAWzkLZSE4TMNdwAHl5M7Wixr5Zlqc1R4x8IM76U7mYwlOGKiN/n09CiuVI 2R/CZgdN9y7JR862u6WMhI60vg59UTSRaeDpOv81/c9d8tNc8qbLj/x/Fk8rYkJnQSzdZ4EMqYeMX mqJxN8qC06IqRstQ48H+c2/k+Kd66HDPk2FHwXGK+GlxiehycBNV/qMzCpDfTHgkcoyPQhmdTpRbo giUuhFdkg==; Received: from localhost ([::1] helo=merlin.infradead.org) by merlin.infradead.org with esmtp (Exim 4.92.3 #3 (Red Hat Linux)) id 1kQVc1-0007z4-N9; Thu, 08 Oct 2020 13:05:37 +0000 Received: from esa3.microchip.iphmx.com ([68.232.153.233]) by merlin.infradead.org with esmtps (Exim 4.92.3 #3 (Red Hat Linux)) id 1kQVbu-0007xJ-K5 for linux-arm-kernel@lists.infradead.org; Thu, 08 Oct 2020 13:05:34 +0000 DKIM-Signature: v=1; a=rsa-sha256; c=simple/simple; d=microchip.com; i=@microchip.com; q=dns/txt; s=mchp; t=1602162330; x=1633698330; h=from:to:cc:subject:date:message-id:in-reply-to: references:mime-version:content-transfer-encoding; bh=VdJpqnrCyvW7VQ1RSbiMo6xgusNO3aMhKhOn09ATvjo=; b=comevx5uNSnhXhpI3MSSCcXvPmx673UR53Ue1hB8FXG6vcTIHIfWDNlR XhOvYPfC5TgZPtPZkZvKwGQLyG185f9i2BHyQ5GE5jlk3VTneWdSD0nPG ofz0U0WCNMD6HW+x+J5+aE0U+MLedMvwy1UBaRUEgAYv4cgvt2eilzQms t/v3E9i2krwjnonxXnfaasTKfTaGQjdOrJXaiDZbZH3XQabHuB3yLBx5f NxkUw+inqccxDda4MeMeAMSjLOyttxTI8c70rL/40cBS8TER+BKGGK7EE I8kytxA4rAjCEAGXUD11XRpE5b6X6MRU3wDonMZ2OsKxirwklMmvoXruX A==; IronPort-SDR: 7sNj4/jUXKcKei9HTdhRWvuFtg7Rjc4rh8ZszfIlhjgnvqnOIGISIKvIkstWBhCKRUgna4QM50 H9m/VvyCGL0+Nm83zAed/gqRjmT2hTeMSBTsHjw7Y98Fj5okwg0mr4Fw53Zsx2Dyk+z2Hn+GRa D9FaolcXxukMPSaPcWhaMljqh9hljvw/538V7MX29UUsTnmRtO8u8GOn8VxkmTVUMtktSsUvcZ wE7I+/iUz4sDALwULhWyyw488mSkTzk8Y7iBgcnbO3ivpYaMPx5MF6b+RULU4IhPSL6IhWORDV QgM= X-IronPort-AV: E=Sophos;i="5.77,350,1596524400"; d="scan'208";a="94643176" Received: from smtpout.microchip.com (HELO email.microchip.com) ([198.175.253.82]) by esa3.microchip.iphmx.com with ESMTP/TLS/AES256-SHA256; 08 Oct 2020 06:05:28 -0700 Received: from chn-vm-ex03.mchp-main.com (10.10.85.151) by chn-vm-ex04.mchp-main.com (10.10.85.152) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256) id 15.1.1979.3; Thu, 8 Oct 2020 06:05:27 -0700 Received: from soft-dev10.microsemi.net (10.10.115.15) by chn-vm-ex03.mchp-main.com (10.10.85.151) with Microsoft SMTP Server id 15.1.1979.3 via Frontend Transport; Thu, 8 Oct 2020 06:05:25 -0700 From: Lars Povlsen To: Linus Walleij , Rob Herring Subject: [PATCH v5 1/3] dt-bindings: pinctrl: Add bindings for pinctrl-microchip-sgpio driver Date: Thu, 8 Oct 2020 15:05:13 +0200 Message-ID: <20201008130515.2385825-2-lars.povlsen@microchip.com> X-Mailer: git-send-email 2.25.1 In-Reply-To: <20201008130515.2385825-1-lars.povlsen@microchip.com> References: <20201008130515.2385825-1-lars.povlsen@microchip.com> MIME-Version: 1.0 X-CRM114-Version: 20100106-BlameMichelson ( TRE 0.8.0 (BSD) ) MR-646709E3 X-CRM114-CacheID: sfid-20201008_090530_868345_3839A472 X-CRM114-Status: GOOD ( 16.92 ) X-Spam-Score: -2.5 (--) X-Spam-Report: SpamAssassin version 3.4.4 on merlin.infradead.org summary: Content analysis details: (-2.5 points) pts rule name description ---- ---------------------- -------------------------------------------------- -2.3 RCVD_IN_DNSWL_MED RBL: Sender listed at https://www.dnswl.org/, medium trust [68.232.153.233 listed in list.dnswl.org] 0.0 RCVD_IN_MSPIKE_H4 RBL: Very Good reputation (+4) [68.232.153.233 listed in wl.mailspike.net] -0.0 SPF_PASS SPF: sender matches SPF record -0.0 SPF_HELO_PASS SPF: HELO matches SPF record -0.1 DKIM_VALID Message has at least one valid DKIM or DK signature -0.1 DKIM_VALID_AU Message has a valid DKIM or DK signature from author's domain 0.1 DKIM_SIGNED Message has a DKIM or DK signature, not necessarily valid -0.1 DKIM_VALID_EF Message has a valid DKIM or DK signature from envelope-from domain 0.0 RCVD_IN_MSPIKE_WL Mailspike good senders X-BeenThere: linux-arm-kernel@lists.infradead.org X-Mailman-Version: 2.1.29 Precedence: list List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Cc: devicetree@vger.kernel.org, Alexandre Belloni , linux-kernel@vger.kernel.org, Microchip Linux Driver Support , linux-gpio@vger.kernel.org, Lars Povlsen , linux-arm-kernel@lists.infradead.org Sender: "linux-arm-kernel" Errors-To: linux-arm-kernel-bounces+patchwork-linux-arm=patchwork.kernel.org@lists.infradead.org This adds DT bindings for the Microsemi/Microchip SGPIO controller, bindings microchip,sparx5-sgpio, mscc,ocelot-sgpio and mscc,luton-sgpio. Signed-off-by: Lars Povlsen Reviewed-by: Rob Herring --- .../pinctrl/microchip,sparx5-sgpio.yaml | 140 ++++++++++++++++++ 1 file changed, 140 insertions(+) create mode 100644 Documentation/devicetree/bindings/pinctrl/microchip,sparx5-sgpio.yaml -- 2.25.1 diff --git a/Documentation/devicetree/bindings/pinctrl/microchip,sparx5-sgpio.yaml b/Documentation/devicetree/bindings/pinctrl/microchip,sparx5-sgpio.yaml new file mode 100644 index 000000000000..fc41495800ed --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/microchip,sparx5-sgpio.yaml @@ -0,0 +1,140 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/microchip,sparx5-sgpio.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Microsemi/Microchip Serial GPIO controller + +maintainers: + - Lars Povlsen + +description: | + By using a serial interface, the SIO controller significantly extend + the number of available GPIOs with a minimum number of additional + pins on the device. The primary purpose of the SIO controllers is to + connect control signals from SFP modules and to act as an LED + controller. + +properties: + $nodename: + pattern: "^gpio@[0-9a-f]+$" + + compatible: + enum: + - microchip,sparx5-sgpio + - mscc,ocelot-sgpio + - mscc,luton-sgpio + + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + microchip,sgpio-port-ranges: + description: This is a sequence of tuples, defining intervals of + enabled ports in the serial input stream. The enabled ports must + match the hardware configuration in order for signals to be + properly written/read to/from the controller holding + registers. Being tuples, then number of arguments must be + even. The tuples mast be ordered (low, high) and are + inclusive. + $ref: /schemas/types.yaml#/definitions/uint32-matrix + items: + items: + - description: | + "low" indicates start bit number of range + minimum: 0 + maximum: 31 + - description: | + "high" indicates end bit number of range + minimum: 0 + maximum: 31 + minItems: 1 + maxItems: 32 + + microchip,sgpio-frequency: + description: The sgpio controller frequency (Hz). This dictates + the serial bitstream speed, which again affects the latency in + getting control signals back and forth between external shift + registers. The speed must be no larger than half the system + clock, and larger than zero. + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 1 + default: 12500000 + +patternProperties: + "^gpio@[0-1]$": + type: object + properties: + compatible: + const: microchip,sparx5-sgpio-bank + + reg: + description: | + The GPIO bank number. "0" is designates the input pin bank, + "1" the output bank. + maxItems: 1 + + gpio-controller: true + + '#gpio-cells': + const: 3 + + ngpios: + minimum: 1 + maximum: 128 + + required: + - compatible + - reg + - gpio-controller + - '#gpio-cells' + - ngpios + + additionalProperties: false + +additionalProperties: false + +required: + - compatible + - reg + - clocks + - microchip,sgpio-port-ranges + - "#address-cells" + - "#size-cells" + +examples: + - | + sgpio2: gpio@1101059c { + #address-cells = <1>; + #size-cells = <0>; + compatible = "microchip,sparx5-sgpio"; + clocks = <&sys_clk>; + pinctrl-0 = <&sgpio2_pins>; + pinctrl-names = "default"; + reg = <0x1101059c 0x100>; + microchip,sgpio-port-ranges = <0 0>, <16 18>, <28 31>; + microchip,sgpio-frequency = <25000000>; + sgpio_in2: gpio@0 { + reg = <0>; + compatible = "microchip,sparx5-sgpio-bank"; + gpio-controller; + #gpio-cells = <3>; + ngpios = <96>; + }; + sgpio_out2: gpio@1 { + compatible = "microchip,sparx5-sgpio-bank"; + reg = <1>; + gpio-controller; + #gpio-cells = <3>; + ngpios = <96>; + }; + }; From patchwork Thu Oct 8 13:05:14 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Lars Povlsen X-Patchwork-Id: 11822939 Return-Path: Received: from mail.kernel.org (pdx-korg-mail-1.web.codeaurora.org [172.30.200.123]) by pdx-korg-patchwork-2.web.codeaurora.org (Postfix) with ESMTP id 1B9A517CF for ; Thu, 8 Oct 2020 13:05:58 +0000 (UTC) Received: from merlin.infradead.org (merlin.infradead.org [205.233.59.134]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by mail.kernel.org (Postfix) with ESMTPS id BB1F12145D for ; Thu, 8 Oct 2020 13:05:57 +0000 (UTC) Authentication-Results: mail.kernel.org; dkim=pass (2048-bit key) header.d=lists.infradead.org header.i=@lists.infradead.org header.b="tHi23XMP"; dkim=fail reason="signature verification failed" (2048-bit key) header.d=microchip.com header.i=@microchip.com header.b="XQr4YarU" DMARC-Filter: OpenDMARC Filter v1.3.2 mail.kernel.org BB1F12145D Authentication-Results: mail.kernel.org; dmarc=fail (p=quarantine dis=none) header.from=microchip.com Authentication-Results: mail.kernel.org; spf=none smtp.mailfrom=linux-arm-kernel-bounces+patchwork-linux-arm=patchwork.kernel.org@lists.infradead.org DKIM-Signature: v=1; a=rsa-sha256; q=dns/txt; c=relaxed/relaxed; d=lists.infradead.org; s=merlin.20170209; h=Sender:Content-Transfer-Encoding: Content-Type:Cc:List-Subscribe:List-Help:List-Post:List-Archive: List-Unsubscribe:List-Id:MIME-Version:References:In-Reply-To:Message-ID:Date: Subject:To:From:Reply-To:Content-ID:Content-Description:Resent-Date: Resent-From:Resent-Sender:Resent-To:Resent-Cc:Resent-Message-ID:List-Owner; bh=Wg0r6aBlOGujhuebYRRPvCIcKp2hdzRUAkq0U1eVq1Y=; b=tHi23XMPJ82DOw7r0OYIXH9tX 1wTTdD6DAkubdSe8BPUztBxYk6MwCbvqJWFVSkUiOef/JNsiv4fR8ViIVSDAEw30h7euyVc2Fk+Yg SAD3Ije4xK68D+ThZiC67jQdk7O7w1c3rONIN97jrSW1+NaQo7Bhn+/4YIr9F61ljJyzOqoQxGUET ideTbcdbszROugV4uEtfF4YcygoB/XBcHUtJvSLQOCZLN6N1urDmqOj8H6Eznv62nWIyPKa4wVPiD U/xDrS0s+zw8Yp0VOxgLvye2n43pRQn0ZGVnJYlWHUM+U33Quhmr9PNxNxdMPsQQcIn3mVA7VpByh 79dA4ppJg==; Received: from localhost ([::1] helo=merlin.infradead.org) by merlin.infradead.org with esmtp (Exim 4.92.3 #3 (Red Hat Linux)) id 1kQVc8-00081B-6F; Thu, 08 Oct 2020 13:05:44 +0000 Received: from esa3.microchip.iphmx.com ([68.232.153.233]) by merlin.infradead.org with esmtps (Exim 4.92.3 #3 (Red Hat Linux)) id 1kQVc1-0007xJ-ND for linux-arm-kernel@lists.infradead.org; Thu, 08 Oct 2020 13:05:42 +0000 DKIM-Signature: v=1; a=rsa-sha256; c=simple/simple; d=microchip.com; i=@microchip.com; q=dns/txt; s=mchp; t=1602162337; x=1633698337; h=from:to:cc:subject:date:message-id:in-reply-to: references:mime-version:content-transfer-encoding; bh=HLmRPPsxJRk2nvP7rgGjisHllRXca5ynIUqnjwcY84Y=; b=XQr4YarUr8YVchq6RiCfw5ia4CPvOczrWuKTCNNXQ0RAaSH/0/ZgqGbo mbam6Yb1VHGiFkybSXotKr2R4KPrOH8jKZDOFFdfHcoJyy3z7gqkYYrmR YpauoSx2K7UPVBicPAldm5w7GxGUByec1MyegsTV+l20BApoMNrEo1fvc 21+t7NXDSeliOcxTffjo2884cUMAAmMeUow/8yLN80MTP7v3u6yiE7Q5H 3LqsEdtWCpjabWljwbvtJdt2J1mbnYpzZyY78D8famQxG4h3GARw8HKGH mZAK4Ve+QszAkLeGpZqVtkwZpYL0GexBUk3mYqN4YE+s+28Hl12X7F3CJ w==; IronPort-SDR: bfdBahW7zJsgHru2pxwE1FSZsiCP+nFbkuo6p8R0BaQkI6YbisMKJQPNVXJ0EJt5IU9gfQzN+I RxLyHAsKi7ljVvQQMHEGs3ojIJ5RbinE4ZlsHvjNwmQzXEk60vXeaJmQzOf8quu3AFHP11l5Vm T/As0yKOi64ihjit8yBMR879XrRcO3Wr9Y9fqCHHhZSmbJSnjr7cZXJHaOXKsKuUmm+F+SKdLu o36H8imaWJLzrB2su5HfySwG9qZ54dk5Wdn0adTGOfV2YO7n2gp6m1vdnDsbewV3JBkH5N5Ri0 On4= X-IronPort-AV: E=Sophos;i="5.77,350,1596524400"; d="scan'208";a="94643231" Received: from smtpout.microchip.com (HELO email.microchip.com) ([198.175.253.82]) by esa3.microchip.iphmx.com with ESMTP/TLS/AES256-SHA256; 08 Oct 2020 06:05:37 -0700 Received: from chn-vm-ex03.mchp-main.com (10.10.85.151) by chn-vm-ex04.mchp-main.com (10.10.85.152) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256) id 15.1.1979.3; Thu, 8 Oct 2020 06:05:36 -0700 Received: from soft-dev10.microsemi.net (10.10.115.15) by chn-vm-ex03.mchp-main.com (10.10.85.151) with Microsoft SMTP Server id 15.1.1979.3 via Frontend Transport; Thu, 8 Oct 2020 06:05:34 -0700 From: Lars Povlsen To: Linus Walleij Subject: [PATCH v5 2/3] pinctrl: pinctrl-microchip-sgpio: Add pinctrl driver for Microsemi Serial GPIO Date: Thu, 8 Oct 2020 15:05:14 +0200 Message-ID: <20201008130515.2385825-3-lars.povlsen@microchip.com> X-Mailer: git-send-email 2.25.1 In-Reply-To: <20201008130515.2385825-1-lars.povlsen@microchip.com> References: <20201008130515.2385825-1-lars.povlsen@microchip.com> MIME-Version: 1.0 X-CRM114-Version: 20100106-BlameMichelson ( TRE 0.8.0 (BSD) ) MR-646709E3 X-CRM114-CacheID: sfid-20201008_090538_126776_D4D4A946 X-CRM114-Status: GOOD ( 22.78 ) X-Spam-Score: -2.5 (--) X-Spam-Report: SpamAssassin version 3.4.4 on merlin.infradead.org summary: Content analysis details: (-2.5 points) pts rule name description ---- ---------------------- -------------------------------------------------- -2.3 RCVD_IN_DNSWL_MED RBL: Sender listed at https://www.dnswl.org/, medium trust [68.232.153.233 listed in list.dnswl.org] 0.0 RCVD_IN_MSPIKE_H4 RBL: Very Good reputation (+4) [68.232.153.233 listed in wl.mailspike.net] -0.0 SPF_PASS SPF: sender matches SPF record -0.0 SPF_HELO_PASS SPF: HELO matches SPF record -0.1 DKIM_VALID Message has at least one valid DKIM or DK signature -0.1 DKIM_VALID_AU Message has a valid DKIM or DK signature from author's domain 0.1 DKIM_SIGNED Message has a DKIM or DK signature, not necessarily valid -0.1 DKIM_VALID_EF Message has a valid DKIM or DK signature from envelope-from domain 0.0 RCVD_IN_MSPIKE_WL Mailspike good senders X-BeenThere: linux-arm-kernel@lists.infradead.org X-Mailman-Version: 2.1.29 Precedence: list List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Cc: devicetree@vger.kernel.org, Alexandre Belloni , linux-kernel@vger.kernel.org, Microchip Linux Driver Support , linux-gpio@vger.kernel.org, Lars Povlsen , linux-arm-kernel@lists.infradead.org Sender: "linux-arm-kernel" Errors-To: linux-arm-kernel-bounces+patchwork-linux-arm=patchwork.kernel.org@lists.infradead.org This adds a pinctrl driver for the Microsemi/Microchip Serial GPIO (SGPIO) device used in various SoC's. Signed-off-by: Lars Povlsen --- MAINTAINERS | 1 + drivers/pinctrl/Kconfig | 18 + drivers/pinctrl/Makefile | 1 + drivers/pinctrl/pinctrl-microchip-sgpio.c | 665 ++++++++++++++++++++++ 4 files changed, 685 insertions(+) create mode 100644 drivers/pinctrl/pinctrl-microchip-sgpio.c diff --git a/MAINTAINERS b/MAINTAINERS index cc70e3ab428b..a8cc028b84d0 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -2137,6 +2137,7 @@ M: Microchip Linux Driver Support L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) S: Supported F: arch/arm64/boot/dts/microchip/ +F: drivers/pinctrl/pinctrl-microchip-sgpio.c N: sparx5 ARM/MIOA701 MACHINE SUPPORT diff --git a/drivers/pinctrl/Kconfig b/drivers/pinctrl/Kconfig index 8828613c4e0e..1b3527d4c3c8 100644 --- a/drivers/pinctrl/Kconfig +++ b/drivers/pinctrl/Kconfig @@ -404,6 +404,24 @@ config PINCTRL_OCELOT select OF_GPIO select REGMAP_MMIO +config PINCTRL_MICROCHIP_SGPIO + bool "Pinctrl driver for Microsemi/Microchip Serial GPIO" + depends on OF + depends on HAS_IOMEM + select GPIOLIB + select GENERIC_PINCONF + select GENERIC_PINCTRL_GROUPS + select GENERIC_PINMUX_FUNCTIONS + select OF_GPIO + help + Support for the serial GPIO interface used on Microsemi and + Microchip SoC's. By using a serial interface, the SIO + controller significantly extends the number of available + GPIOs with a minimum number of additional pins on the + device. The primary purpose of the SIO controller is to + connect control signals from SFP modules and to act as an + LED controller. + source "drivers/pinctrl/actions/Kconfig" source "drivers/pinctrl/aspeed/Kconfig" source "drivers/pinctrl/bcm/Kconfig" diff --git a/drivers/pinctrl/Makefile b/drivers/pinctrl/Makefile index 1731b2154df9..347b0e015960 100644 --- a/drivers/pinctrl/Makefile +++ b/drivers/pinctrl/Makefile @@ -49,6 +49,7 @@ obj-$(CONFIG_PINCTRL_ZYNQ) += pinctrl-zynq.o obj-$(CONFIG_PINCTRL_INGENIC) += pinctrl-ingenic.o obj-$(CONFIG_PINCTRL_RK805) += pinctrl-rk805.o obj-$(CONFIG_PINCTRL_OCELOT) += pinctrl-ocelot.o +obj-$(CONFIG_PINCTRL_MICROCHIP_SGPIO) += pinctrl-microchip-sgpio.o obj-$(CONFIG_PINCTRL_EQUILIBRIUM) += pinctrl-equilibrium.o obj-y += actions/ diff --git a/drivers/pinctrl/pinctrl-microchip-sgpio.c b/drivers/pinctrl/pinctrl-microchip-sgpio.c new file mode 100644 index 000000000000..3c0b7071f382 --- /dev/null +++ b/drivers/pinctrl/pinctrl-microchip-sgpio.c @@ -0,0 +1,665 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Microsemi/Microchip SoCs serial gpio driver + * + * Author: + * + * Copyright (c) 2020 Microchip Technology Inc. and its subsidiaries. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "core.h" +#include "pinconf.h" +#include "pinmux.h" + +#define SGPIO_BITS_PER_WORD 32 +#define SGPIO_MAX_BITS 4 + +#define PIN_NAM_SZ (sizeof("SGPIO_D_pXXbY")+1) + +enum { + REG_INPUT_DATA, + REG_PORT_CONFIG, + REG_PORT_ENABLE, + REG_SIO_CONFIG, + REG_SIO_CLOCK, + MAXREG +}; + +struct sgpio_properties { + u8 regoff[MAXREG]; + u32 auto_repeat; + u32 port_width; + u32 clk_freq; + u32 bit_source; +}; + +#define __shf(x) (__builtin_ffsll(x) - 1) +#define __BF_PREP(bf, x) (bf & ((x) << __shf(bf))) +#define __BF_GET(bf, x) (((x & bf) >> __shf(bf))) + +#define SGPIO_M_CFG_SIO_AUTO_REPEAT(p) ((p)->properties->auto_repeat) +#define SGPIO_F_CFG_SIO_PORT_WIDTH(p, x) __BF_PREP((p)->properties->port_width, x) +#define SGPIO_M_CFG_SIO_PORT_WIDTH(p) ((p)->properties->port_width) +#define SGPIO_F_CLOCK_SIO_CLK_FREQ(p, x) __BF_PREP((p)->properties->clk_freq, x) +#define SGPIO_M_CLOCK_SIO_CLK_FREQ(p) ((p)->properties->clk_freq) +#define SGPIO_F_PORT_CFG_BIT_SOURCE(p, x) __BF_PREP((p)->properties->bit_source, x) +#define SGPIO_X_PORT_CFG_BIT_SOURCE(p, x) __BF_GET((p)->properties->bit_source, x) + +const struct sgpio_properties properties_luton = { + .regoff = { 0x00, 0x09, 0x29, 0x2a, 0x2b }, + .auto_repeat = BIT(5), + .port_width = GENMASK(3, 2), + .clk_freq = GENMASK(11, 0), + .bit_source = GENMASK(11, 0), +}; + +const struct sgpio_properties properties_ocelot = { + .regoff = { 0x00, 0x06, 0x26, 0x04, 0x05 }, + .auto_repeat = BIT(10), + .port_width = GENMASK(8, 7), + .clk_freq = GENMASK(19, 8), + .bit_source = GENMASK(23, 12), +}; + +const struct sgpio_properties properties_sparx5 = { + .regoff = { 0x00, 0x06, 0x26, 0x04, 0x05 }, + .auto_repeat = BIT(6), + .port_width = GENMASK(4, 3), + .clk_freq = GENMASK(19, 8), + .bit_source = GENMASK(23, 12), +}; + +static const char * const functions[] = { "gpio" }; + +struct sgpio_bank { + struct sgpio_priv *priv; + bool is_input; + struct gpio_chip gpio; + struct pinctrl_desc pctl_desc; +}; + +struct sgpio_priv { + struct device *dev; + struct sgpio_bank in; + struct sgpio_bank out; + u32 bitcount; + u32 ports; + u32 clock; + u32 __iomem *regs; + const struct sgpio_properties *properties; +}; + +struct sgpio_port_addr { + u8 port; + u8 bit; +}; + +static inline void sgpio_pin_to_addr(struct sgpio_priv *priv, int pin, + struct sgpio_port_addr *addr) +{ + addr->port = pin / priv->bitcount; + addr->bit = pin % priv->bitcount; +} + +static inline u32 sgpio_readl(struct sgpio_priv *priv, u32 rno, u32 off) +{ + u32 __iomem *reg = &priv->regs[priv->properties->regoff[rno] + off]; + + return readl(reg); +} + +static inline void sgpio_writel(struct sgpio_priv *priv, + u32 val, u32 rno, u32 off) +{ + u32 __iomem *reg = &priv->regs[priv->properties->regoff[rno] + off]; + + writel(val, reg); +} + +static inline void sgpio_clrsetbits(struct sgpio_priv *priv, + u32 rno, u32 off, u32 clear, u32 set) +{ + u32 __iomem *reg = &priv->regs[priv->properties->regoff[rno] + off]; + u32 val = readl(reg); + + val &= ~clear; + val |= set; + + writel(val, reg); +} + +static void sgpio_output_set(struct sgpio_priv *priv, + struct sgpio_port_addr *addr, + int value) +{ + unsigned int bit = 3 * addr->bit; + + sgpio_clrsetbits(priv, REG_PORT_CONFIG, addr->port, + SGPIO_F_PORT_CFG_BIT_SOURCE(priv, BIT(bit)), + SGPIO_F_PORT_CFG_BIT_SOURCE(priv, value << bit)); +} + +static int sgpio_output_get(struct sgpio_priv *priv, + struct sgpio_port_addr *addr) +{ + u32 portval = sgpio_readl(priv, REG_PORT_CONFIG, addr->port); + unsigned int bit = 3 * addr->bit; + + return !!(SGPIO_X_PORT_CFG_BIT_SOURCE(priv, portval) & BIT(bit)); +} + +static int sgpio_input_get(struct sgpio_priv *priv, + struct sgpio_port_addr *addr) +{ + int ret; + + ret = !!(sgpio_readl(priv, REG_INPUT_DATA, addr->bit) & + BIT(addr->port)); + + return ret; +} + +static int sgpio_pinconf_get(struct pinctrl_dev *pctldev, + unsigned int pin, unsigned long *config) +{ + struct sgpio_bank *bank = pinctrl_dev_get_drvdata(pctldev); + struct sgpio_priv *priv = bank->priv; + struct sgpio_port_addr addr; + u32 param = pinconf_to_config_param(*config); + int val; + + sgpio_pin_to_addr(priv, pin, &addr); + + switch (param) { + case PIN_CONFIG_INPUT_ENABLE: + val = bank->is_input; + break; + + case PIN_CONFIG_OUTPUT_ENABLE: + val = !bank->is_input; + break; + + case PIN_CONFIG_OUTPUT: + if (bank->is_input) + return -EINVAL; + val = sgpio_output_get(priv, &addr); + break; + + default: + return -EOPNOTSUPP; + } + + *config = pinconf_to_config_packed(param, val); + + return 0; +} + +static int sgpio_pinconf_set(struct pinctrl_dev *pctldev, unsigned int pin, + unsigned long *configs, unsigned int num_configs) +{ + struct sgpio_bank *bank = pinctrl_dev_get_drvdata(pctldev); + struct sgpio_priv *priv = bank->priv; + struct sgpio_port_addr addr; + u32 param, arg; + int cfg, err = 0; + + sgpio_pin_to_addr(priv, pin, &addr); + + for (cfg = 0; cfg < num_configs; cfg++) { + param = pinconf_to_config_param(configs[cfg]); + arg = pinconf_to_config_argument(configs[cfg]); + + switch (param) { + case PIN_CONFIG_OUTPUT: + if (bank->is_input) + return -EINVAL; + sgpio_output_set(priv, &addr, arg); + break; + + default: + err = -EOPNOTSUPP; + } + } + + return err; +} + +static const struct pinconf_ops sgpio_confops = { + .is_generic = true, + .pin_config_get = sgpio_pinconf_get, + .pin_config_set = sgpio_pinconf_set, + .pin_config_config_dbg_show = pinconf_generic_dump_config, +}; + +static int sgpio_get_functions_count(struct pinctrl_dev *pctldev) +{ + return 1; +} + +static const char *sgpio_get_function_name(struct pinctrl_dev *pctldev, + unsigned int function) +{ + return functions[0]; +} + +static int sgpio_get_function_groups(struct pinctrl_dev *pctldev, + unsigned int function, + const char *const **groups, + unsigned *const num_groups) +{ + *groups = functions; + *num_groups = ARRAY_SIZE(functions); + + return 0; +} + +static int sgpio_pinmux_set_mux(struct pinctrl_dev *pctldev, + unsigned int selector, unsigned int group) +{ + return 0; +} + +static int sgpio_gpio_set_direction(struct pinctrl_dev *pctldev, + struct pinctrl_gpio_range *range, + unsigned int pin, bool input) +{ + struct sgpio_bank *bank = pinctrl_dev_get_drvdata(pctldev); + + if (input != bank->is_input) { + dev_err(pctldev->dev, "Pin %d direction as %s is not possible\n", + pin, input ? "input" : "output"); + return -EINVAL; + } + + return 0; +} + +static int sgpio_gpio_request_enable(struct pinctrl_dev *pctldev, + struct pinctrl_gpio_range *range, + unsigned int offset) +{ + struct sgpio_bank *bank = pinctrl_dev_get_drvdata(pctldev); + struct sgpio_priv *priv = bank->priv; + struct sgpio_port_addr addr; + + sgpio_pin_to_addr(priv, offset, &addr); + + if ((priv->ports & BIT(addr.port)) == 0) { + dev_warn(priv->dev, "%s: Request port %d for pin %d is not activated\n", + __func__, addr.port, offset); + } + + return 0; +} + +static const struct pinmux_ops sgpio_pmx_ops = { + .get_functions_count = sgpio_get_functions_count, + .get_function_name = sgpio_get_function_name, + .get_function_groups = sgpio_get_function_groups, + .set_mux = sgpio_pinmux_set_mux, + .gpio_set_direction = sgpio_gpio_set_direction, + .gpio_request_enable = sgpio_gpio_request_enable, +}; + +static int sgpio_pctl_get_groups_count(struct pinctrl_dev *pctldev) +{ + struct sgpio_bank *bank = pinctrl_dev_get_drvdata(pctldev); + + return bank->pctl_desc.npins; +} + +static const char *sgpio_pctl_get_group_name(struct pinctrl_dev *pctldev, + unsigned int group) +{ + struct sgpio_bank *bank = pinctrl_dev_get_drvdata(pctldev); + + return bank->pctl_desc.pins[group].name; +} + +static int sgpio_pctl_get_group_pins(struct pinctrl_dev *pctldev, + unsigned int group, + const unsigned int **pins, + unsigned int *num_pins) +{ + struct sgpio_bank *bank = pinctrl_dev_get_drvdata(pctldev); + + *pins = &bank->pctl_desc.pins[group].number; + *num_pins = 1; + + return 0; +} + +static const struct pinctrl_ops sgpio_pctl_ops = { + .get_groups_count = sgpio_pctl_get_groups_count, + .get_group_name = sgpio_pctl_get_group_name, + .get_group_pins = sgpio_pctl_get_group_pins, + .dt_node_to_map = pinconf_generic_dt_node_to_map_pin, + .dt_free_map = pinconf_generic_dt_free_map, +}; + +static int microchip_sgpio_direction_input(struct gpio_chip *gc, unsigned int gpio) +{ + struct sgpio_bank *bank = gpiochip_get_data(gc); + + /* Fixed-position function */ + return bank->is_input ? 0 : -EINVAL; +} + +static int microchip_sgpio_direction_output(struct gpio_chip *gc, + unsigned int gpio, int value) +{ + struct sgpio_bank *bank = gpiochip_get_data(gc); + struct sgpio_priv *priv = bank->priv; + struct sgpio_port_addr addr; + + /* Fixed-position function */ + if (bank->is_input) + return -EINVAL; + + sgpio_pin_to_addr(priv, gpio, &addr); + + sgpio_output_set(priv, &addr, value); + + return 0; +} + +static int microchip_sgpio_get_direction(struct gpio_chip *gc, unsigned int gpio) +{ + struct sgpio_bank *bank = gpiochip_get_data(gc); + + return bank->is_input ? GPIO_LINE_DIRECTION_IN : GPIO_LINE_DIRECTION_OUT; +} + +static void microchip_sgpio_set_value(struct gpio_chip *gc, + unsigned int gpio, int value) +{ + microchip_sgpio_direction_output(gc, gpio, value); +} + +static int microchip_sgpio_get_value(struct gpio_chip *gc, unsigned int gpio) +{ + struct sgpio_bank *bank = gpiochip_get_data(gc); + struct sgpio_priv *priv = bank->priv; + struct sgpio_port_addr addr; + int ret; + + sgpio_pin_to_addr(priv, gpio, &addr); + + if (bank->is_input) + ret = sgpio_input_get(priv, &addr); + else + ret = sgpio_output_get(priv, &addr); + + return ret; +} + +static int microchip_sgpio_of_xlate(struct gpio_chip *gc, + const struct of_phandle_args *gpiospec, + u32 *flags) +{ + struct sgpio_bank *bank = gpiochip_get_data(gc); + struct sgpio_priv *priv = bank->priv; + int pin; + + if (gpiospec->args[0] > SGPIO_BITS_PER_WORD || + gpiospec->args[1] > priv->bitcount) + return -EINVAL; + + pin = gpiospec->args[1] + (gpiospec->args[0] * priv->bitcount); + + if (pin > gc->ngpio) + return -EINVAL; + + if (flags) + *flags = gpiospec->args[2]; + + return pin; +} + +static int microchip_sgpio_get_ports(struct sgpio_priv *priv) +{ + struct device *dev = priv->dev; + struct device_node *np = dev->of_node; + int i, ret; + u32 range_params[64]; + + /* Calculate port mask */ + ret = of_property_read_variable_u32_array(np, + "microchip,sgpio-port-ranges", + range_params, + 2, + ARRAY_SIZE(range_params)); + if (ret < 0 || ret % 2) { + dev_err(dev, "%s port range\n", + ret == -EINVAL ? "Missing" : "Invalid"); + return ret; + } + for (i = 0; i < ret; i += 2) { + int start, end; + + start = range_params[i]; + end = range_params[i + 1]; + if (start > end || end >= SGPIO_BITS_PER_WORD) { + dev_err(dev, "Ill-formed port-range [%d:%d]\n", + start, end); + } + priv->ports |= GENMASK(end, start); + } + + return 0; +} + +static int microchip_sgpio_register_bank(struct device *dev, + struct sgpio_priv *priv, + struct fwnode_handle *fwnode, + int bankno) +{ + struct sgpio_bank *bank; + struct pinctrl_pin_desc *pins; + struct pinctrl_desc *pctl_desc; + struct pinctrl_dev *pctldev; + struct gpio_chip *gc; + bool is_input = (bankno == 0); + int ret; + u32 ngpios; + + /* Get overall bank struct */ + bank = is_input ? &priv->in : &priv->out; + bank->is_input = is_input; + bank->priv = priv; + + if (fwnode_property_read_u32(fwnode, "ngpios", &ngpios)) { + dev_info(dev, "failed to get number of gpios for bank%d\n", + bankno); + ngpios = 64; + } + + priv->bitcount = ngpios / SGPIO_BITS_PER_WORD; + if (priv->bitcount > SGPIO_MAX_BITS) { + dev_err(dev, "Bit width exceeds maximum (%d)\n", + SGPIO_MAX_BITS); + return -EINVAL; + } + + pctl_desc = &bank->pctl_desc; + pctl_desc->name = devm_kasprintf(dev, GFP_KERNEL, "%s-%sput", + dev_name(dev), + is_input ? "in" : "out"); + pctl_desc->pctlops = &sgpio_pctl_ops; + pctl_desc->pmxops = &sgpio_pmx_ops; + pctl_desc->confops = &sgpio_confops; + pctl_desc->owner = THIS_MODULE; + + pins = devm_kzalloc(dev, sizeof(*pins)*ngpios, GFP_KERNEL); + if (pins) { + int i; + char *p, *names; + + names = devm_kzalloc(dev, PIN_NAM_SZ*ngpios, GFP_KERNEL); + + if (!names) + return -ENOMEM; + + pctl_desc->npins = ngpios; + pctl_desc->pins = pins; + + for (p = names, i = 0; i < ngpios; i++, p += PIN_NAM_SZ) { + struct sgpio_port_addr addr; + + sgpio_pin_to_addr(priv, i, &addr); + snprintf(p, PIN_NAM_SZ, "SGPIO_%c_p%db%d", + is_input ? 'I' : 'O', + addr.port, addr.bit); + pins[i].number = i; + pins[i].name = p; + } + } else + return -ENOMEM; + + pctldev = devm_pinctrl_register(dev, pctl_desc, bank); + if (IS_ERR(pctldev)) { + dev_err(dev, "Failed to register pinctrl\n"); + return PTR_ERR(pctldev); + } + + gc = &bank->gpio; + gc->label = pctl_desc->name; + gc->parent = dev; + gc->of_node = to_of_node(fwnode); + gc->owner = THIS_MODULE; + gc->get_direction = microchip_sgpio_get_direction; + gc->direction_input = microchip_sgpio_direction_input; + gc->direction_output = microchip_sgpio_direction_output; + gc->get = microchip_sgpio_get_value; + gc->set = microchip_sgpio_set_value; + gc->request = gpiochip_generic_request; + gc->free = gpiochip_generic_free; + gc->of_xlate = microchip_sgpio_of_xlate; + gc->of_gpio_n_cells = 3; + gc->base = -1; + gc->ngpio = ngpios; + + ret = devm_gpiochip_add_data(dev, gc, bank); + if (ret == 0) + dev_info(dev, "Registered %d GPIOs\n", ngpios); + else + dev_err(dev, "Failed to register: ret %d\n", ret); + + return ret; +} + +static int microchip_sgpio_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct fwnode_handle *fwnode; + struct sgpio_priv *priv; + int div_clock = 0, ret, port; + u32 val; + struct resource *regs; + struct clk *clk; + int i, nbanks; + + priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + priv->dev = dev; + + /* Get clock */ + clk = devm_clk_get(dev, NULL); + if (IS_ERR(clk)) { + dev_err(dev, "Failed to get clock\n"); + return PTR_ERR(clk); + } + div_clock = clk_get_rate(clk); + if (device_property_read_u32(dev, "microchip,sgpio-frequency", + &priv->clock)) + priv->clock = 12500000; + if (priv->clock <= 0 || priv->clock > div_clock) { + dev_err(dev, "Invalid frequency %d\n", priv->clock); + return -EINVAL; + } + + /* Get register map */ + regs = platform_get_resource(pdev, IORESOURCE_MEM, 0); + priv->regs = devm_ioremap_resource(dev, regs); + if (IS_ERR(priv->regs)) + return PTR_ERR(priv->regs); + priv->properties = of_device_get_match_data(dev); + + /* Get rest of device properties */ + ret = microchip_sgpio_get_ports(priv); + if (ret) + return ret; + + nbanks = device_get_child_node_count(dev); + if (nbanks != 2) { + dev_err(dev, "Must have 2 banks (have %d)\n", nbanks); + return -EINVAL; + } + + i = 0; + device_for_each_child_node(dev, fwnode) { + ret = microchip_sgpio_register_bank(dev, priv, fwnode, i++); + if (ret) + return ret; + } + + if (priv->in.gpio.ngpio != priv->out.gpio.ngpio) { + dev_err(dev, "Banks must have same GPIO count\n"); + return -EINVAL; + } + + sgpio_clrsetbits(priv, REG_SIO_CONFIG, 0, + SGPIO_M_CFG_SIO_PORT_WIDTH(priv), + SGPIO_F_CFG_SIO_PORT_WIDTH(priv, priv->bitcount - 1) | + SGPIO_M_CFG_SIO_AUTO_REPEAT(priv)); + val = max(2U, div_clock / priv->clock); + sgpio_clrsetbits(priv, REG_SIO_CLOCK, 0, + SGPIO_M_CLOCK_SIO_CLK_FREQ(priv), + SGPIO_F_CLOCK_SIO_CLK_FREQ(priv, val)); + + for (port = 0; port < SGPIO_BITS_PER_WORD; port++) + sgpio_writel(priv, 0, REG_PORT_CONFIG, port); + sgpio_writel(priv, priv->ports, REG_PORT_ENABLE, 0); + + return 0; +} + +static const struct of_device_id microchip_sgpio_gpio_of_match[] = { + { + .compatible = "microchip,sparx5-sgpio", + .data = &properties_sparx5, + }, { + .compatible = "mscc,luton-sgpio", + .data = &properties_luton, + }, { + .compatible = "mscc,ocelot-sgpio", + .data = &properties_ocelot, + }, { + /* sentinel */ + } +}; + +static struct platform_driver microchip_sgpio_pinctrl_driver = { + .driver = { + .name = "pinctrl-microchip-sgpio", + .of_match_table = microchip_sgpio_gpio_of_match, + .suppress_bind_attrs = true, + }, + .probe = microchip_sgpio_probe, +}; +builtin_platform_driver(microchip_sgpio_pinctrl_driver); From patchwork Thu Oct 8 13:05:15 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Lars Povlsen X-Patchwork-Id: 11822943 Return-Path: Received: from mail.kernel.org (pdx-korg-mail-1.web.codeaurora.org [172.30.200.123]) by pdx-korg-patchwork-2.web.codeaurora.org (Postfix) with ESMTP id 10DE817CF for ; Thu, 8 Oct 2020 13:06:03 +0000 (UTC) Received: from merlin.infradead.org (merlin.infradead.org [205.233.59.134]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by mail.kernel.org (Postfix) with ESMTPS id AF9AD2083B for ; Thu, 8 Oct 2020 13:06:02 +0000 (UTC) Authentication-Results: mail.kernel.org; dkim=pass (2048-bit key) header.d=lists.infradead.org header.i=@lists.infradead.org header.b="N2UM23jj"; dkim=fail reason="signature verification failed" (2048-bit key) header.d=microchip.com header.i=@microchip.com header.b="mmgVO6rF" DMARC-Filter: OpenDMARC Filter v1.3.2 mail.kernel.org AF9AD2083B Authentication-Results: mail.kernel.org; dmarc=fail (p=quarantine dis=none) header.from=microchip.com Authentication-Results: mail.kernel.org; spf=none smtp.mailfrom=linux-arm-kernel-bounces+patchwork-linux-arm=patchwork.kernel.org@lists.infradead.org DKIM-Signature: v=1; a=rsa-sha256; q=dns/txt; c=relaxed/relaxed; d=lists.infradead.org; s=merlin.20170209; h=Sender:Content-Transfer-Encoding: Content-Type:Cc:List-Subscribe:List-Help:List-Post:List-Archive: List-Unsubscribe:List-Id:MIME-Version:References:In-Reply-To:Message-ID:Date: Subject:To:From:Reply-To:Content-ID:Content-Description:Resent-Date: Resent-From:Resent-Sender:Resent-To:Resent-Cc:Resent-Message-ID:List-Owner; bh=32G9gFYy0QBM1Yq0j9n0tvNYk/KKvMLaZcWjJm3VR8A=; b=N2UM23jjv0rngrACuU+rfH4B8 IiEhbizJHkh0+hw/Rw16DCx5oIWcVAgIiNVsDN4IhMZ006p1nMB8V/aPRJEqU6hvNpP0ZuY2g4aNk pyN07PwQtHi7MjD5Gs+wJjG6uHt80ou+vSlCb2xu8zQLrZ/QjzvrhIV/4YcoBcJ4eGr7Hz4uxemUf Xq9KqUa5CPv/Er0n5tXCtZKV8vtq3rOhHBeIkCV6ozdFTVhCtr1klY7DFIYoAeAom+HP5OG8U8sA7 e0INg9xXgLdxJjVfddky08vaSXde7xiKqznYwFheYdBZNFHKim8ccW6VVsKvYpXWe/OWZItL7J5sK zvGCmCbew==; Received: from localhost ([::1] helo=merlin.infradead.org) by merlin.infradead.org with esmtp (Exim 4.92.3 #3 (Red Hat Linux)) id 1kQVcE-00082k-BL; Thu, 08 Oct 2020 13:05:50 +0000 Received: from esa4.microchip.iphmx.com ([68.232.154.123]) by merlin.infradead.org with esmtps (Exim 4.92.3 #3 (Red Hat Linux)) id 1kQVc6-00080R-BZ for linux-arm-kernel@lists.infradead.org; Thu, 08 Oct 2020 13:05:45 +0000 DKIM-Signature: v=1; a=rsa-sha256; c=simple/simple; d=microchip.com; i=@microchip.com; q=dns/txt; s=mchp; t=1602162342; x=1633698342; h=from:to:cc:subject:date:message-id:in-reply-to: references:mime-version:content-transfer-encoding; bh=UhCLBLuu3mzVk3c7IwuTaa+FhI94pNsN1Q+l5nc21eY=; b=mmgVO6rFt2uEouOmovR51kHu9VHkiOFgXDaWjnJ5sAd2XvK0LbTokPD3 IpcB4xR+nnsFHV3locfvIQL2PRo/4CRD5bi2K1qmVgSCL+tgoIueywlC3 JsxSi+HiMd7nELQMOQBEGdoD0tvuJC29mxtRzwCvZfmNNPqjHe1NPeit4 M6G5+WsvkP/wtRx1XIEuYEIGYjJKl5oHqQB5tfb3asHWKBL+KYmdoTg1b Op6Cj3DLXQTNNquZWPiXd1obkS4A359dUOxC8eaCMmSPe6i2KGrvosDyP jU3uiAD/O0Jr/BYsOE/DFPyqgyEuasZLvxcvS8Fn5yJwgdy21QEfiWP03 w==; IronPort-SDR: BlVI+T/EB+QJT1ri+BPLkAsP96g76h/u0OYlad3CoSidtvIwESruMsGlSXgmUlSFjkKDXmRS36 679GvGRPYiONoQGpkpsXd2gqVSxOX6W0NTW3ptuGlqu5znk0im+fO+uZOUNT3rEMtIF364xCK/ Yrtd1mWx+4mgll/0Bq0QhXA6mLx5ueXhpemPwskmkqyuGUwuXO9KVU4BKbR6Y6FQqb4KTSEhzg qTBsnfLA6sj2/fZh59beMHHPtpdEuMtVAJKpG9dMjpZFjJ3a9t+y+nEI4W6+B2X4UYmqA2Bu93 U9s= X-IronPort-AV: E=Sophos;i="5.77,350,1596524400"; d="scan'208";a="89549284" Received: from smtpout.microchip.com (HELO email.microchip.com) ([198.175.253.82]) by esa4.microchip.iphmx.com with ESMTP/TLS/AES256-SHA256; 08 Oct 2020 06:05:41 -0700 Received: from chn-vm-ex03.mchp-main.com (10.10.85.151) by chn-vm-ex02.mchp-main.com (10.10.85.144) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256) id 15.1.1979.3; Thu, 8 Oct 2020 06:05:15 -0700 Received: from soft-dev10.microsemi.net (10.10.115.15) by chn-vm-ex03.mchp-main.com (10.10.85.151) with Microsoft SMTP Server id 15.1.1979.3 via Frontend Transport; Thu, 8 Oct 2020 06:05:38 -0700 From: Lars Povlsen To: Linus Walleij Subject: [PATCH v5 3/3] arm64: dts: sparx5: Add SGPIO devices Date: Thu, 8 Oct 2020 15:05:15 +0200 Message-ID: <20201008130515.2385825-4-lars.povlsen@microchip.com> X-Mailer: git-send-email 2.25.1 In-Reply-To: <20201008130515.2385825-1-lars.povlsen@microchip.com> References: <20201008130515.2385825-1-lars.povlsen@microchip.com> MIME-Version: 1.0 X-CRM114-Version: 20100106-BlameMichelson ( TRE 0.8.0 (BSD) ) MR-646709E3 X-CRM114-CacheID: sfid-20201008_090542_582779_720C871E X-CRM114-Status: GOOD ( 11.50 ) X-Spam-Score: -2.5 (--) X-Spam-Report: SpamAssassin version 3.4.4 on merlin.infradead.org summary: Content analysis details: (-2.5 points) pts rule name description ---- ---------------------- -------------------------------------------------- -2.3 RCVD_IN_DNSWL_MED RBL: Sender listed at https://www.dnswl.org/, medium trust [68.232.154.123 listed in list.dnswl.org] 0.0 RCVD_IN_MSPIKE_H3 RBL: Good reputation (+3) [68.232.154.123 listed in wl.mailspike.net] -0.0 SPF_PASS SPF: sender matches SPF record -0.0 SPF_HELO_PASS SPF: HELO matches SPF record -0.1 DKIM_VALID Message has at least one valid DKIM or DK signature -0.1 DKIM_VALID_AU Message has a valid DKIM or DK signature from author's domain 0.1 DKIM_SIGNED Message has a DKIM or DK signature, not necessarily valid -0.1 DKIM_VALID_EF Message has a valid DKIM or DK signature from envelope-from domain 0.0 RCVD_IN_MSPIKE_WL Mailspike good senders X-BeenThere: linux-arm-kernel@lists.infradead.org X-Mailman-Version: 2.1.29 Precedence: list List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Cc: devicetree@vger.kernel.org, Alexandre Belloni , linux-kernel@vger.kernel.org, Microchip Linux Driver Support , linux-gpio@vger.kernel.org, Lars Povlsen , linux-arm-kernel@lists.infradead.org Sender: "linux-arm-kernel" Errors-To: linux-arm-kernel-bounces+patchwork-linux-arm=patchwork.kernel.org@lists.infradead.org This adds SGPIO devices for the Sparx5 SoC and configures it for the applicable reference boards. Signed-off-by: Lars Povlsen --- arch/arm64/boot/dts/microchip/sparx5.dtsi | 91 ++++++ .../boot/dts/microchip/sparx5_pcb125.dts | 5 + .../dts/microchip/sparx5_pcb134_board.dtsi | 258 ++++++++++++++++++ .../dts/microchip/sparx5_pcb135_board.dtsi | 55 ++++ 4 files changed, 409 insertions(+) diff --git a/arch/arm64/boot/dts/microchip/sparx5.dtsi b/arch/arm64/boot/dts/microchip/sparx5.dtsi index 1def30e6b728..d64621d1213b 100644 --- a/arch/arm64/boot/dts/microchip/sparx5.dtsi +++ b/arch/arm64/boot/dts/microchip/sparx5.dtsi @@ -231,6 +231,22 @@ si2_pins: si2-pins { function = "si2"; }; + sgpio0_pins: sgpio-pins { + pins = "GPIO_0", "GPIO_1", "GPIO_2", "GPIO_3"; + function = "sg0"; + }; + + sgpio1_pins: sgpio1-pins { + pins = "GPIO_4", "GPIO_5", "GPIO_12", "GPIO_13"; + function = "sg1"; + }; + + sgpio2_pins: sgpio2-pins { + pins = "GPIO_30", "GPIO_31", "GPIO_32", + "GPIO_33"; + function = "sg2"; + }; + uart_pins: uart-pins { pins = "GPIO_10", "GPIO_11"; function = "uart"; @@ -261,6 +277,81 @@ emmc_pins: emmc-pins { }; }; + sgpio0: gpio@61101036c { + #address-cells = <1>; + #size-cells = <0>; + compatible = "microchip,sparx5-sgpio"; + status = "disabled"; + clocks = <&sys_clk>; + pinctrl-0 = <&sgpio0_pins>; + pinctrl-names = "default"; + reg = <0x6 0x1101036c 0x100>; + sgpio_in0: gpio@0 { + compatible = "microchip,sparx5-sgpio-bank"; + reg = <0>; + gpio-controller; + #gpio-cells = <3>; + ngpios = <96>; + }; + sgpio_out0: gpio@1 { + compatible = "microchip,sparx5-sgpio-bank"; + reg = <1>; + gpio-controller; + #gpio-cells = <3>; + ngpios = <96>; + }; + }; + + sgpio1: gpio@611010484 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "microchip,sparx5-sgpio"; + status = "disabled"; + clocks = <&sys_clk>; + pinctrl-0 = <&sgpio1_pins>; + pinctrl-names = "default"; + reg = <0x6 0x11010484 0x100>; + sgpio_in1: gpio@0 { + compatible = "microchip,sparx5-sgpio-bank"; + reg = <0>; + gpio-controller; + #gpio-cells = <3>; + ngpios = <96>; + }; + sgpio_out1: gpio@1 { + compatible = "microchip,sparx5-sgpio-bank"; + reg = <1>; + gpio-controller; + #gpio-cells = <3>; + ngpios = <96>; + }; + }; + + sgpio2: gpio@61101059c { + #address-cells = <1>; + #size-cells = <0>; + compatible = "microchip,sparx5-sgpio"; + status = "disabled"; + clocks = <&sys_clk>; + pinctrl-0 = <&sgpio2_pins>; + pinctrl-names = "default"; + reg = <0x6 0x1101059c 0x100>; + sgpio_in2: gpio@0 { + reg = <0>; + compatible = "microchip,sparx5-sgpio-bank"; + gpio-controller; + #gpio-cells = <3>; + ngpios = <96>; + }; + sgpio_out2: gpio@1 { + compatible = "microchip,sparx5-sgpio-bank"; + reg = <1>; + gpio-controller; + #gpio-cells = <3>; + ngpios = <96>; + }; + }; + i2c0: i2c@600101000 { compatible = "snps,designware-i2c"; status = "disabled"; diff --git a/arch/arm64/boot/dts/microchip/sparx5_pcb125.dts b/arch/arm64/boot/dts/microchip/sparx5_pcb125.dts index 6b2da7c7520c..9baa085d7861 100644 --- a/arch/arm64/boot/dts/microchip/sparx5_pcb125.dts +++ b/arch/arm64/boot/dts/microchip/sparx5_pcb125.dts @@ -69,6 +69,11 @@ spi-flash@9 { }; }; +&sgpio0 { + status = "okay"; + microchip,sgpio-port-ranges = <0 23>; +}; + &i2c1 { status = "okay"; }; diff --git a/arch/arm64/boot/dts/microchip/sparx5_pcb134_board.dtsi b/arch/arm64/boot/dts/microchip/sparx5_pcb134_board.dtsi index 35984785d611..4f1512b0e871 100644 --- a/arch/arm64/boot/dts/microchip/sparx5_pcb134_board.dtsi +++ b/arch/arm64/boot/dts/microchip/sparx5_pcb134_board.dtsi @@ -36,6 +36,242 @@ gpio-restart { gpios = <&gpio 37 GPIO_ACTIVE_LOW>; priority = <200>; }; + + leds { + compatible = "gpio-leds"; + led@0 { + label = "twr0:green"; + gpios = <&sgpio_out0 8 0 GPIO_ACTIVE_LOW>; + }; + led@1 { + label = "twr0:yellow"; + gpios = <&sgpio_out0 8 1 GPIO_ACTIVE_LOW>; + }; + led@2 { + label = "twr1:green"; + gpios = <&sgpio_out0 9 0 GPIO_ACTIVE_LOW>; + }; + led@3 { + label = "twr1:yellow"; + gpios = <&sgpio_out0 9 1 GPIO_ACTIVE_LOW>; + }; + led@4 { + label = "twr2:green"; + gpios = <&sgpio_out0 10 0 GPIO_ACTIVE_LOW>; + }; + led@5 { + label = "twr2:yellow"; + gpios = <&sgpio_out0 10 1 GPIO_ACTIVE_LOW>; + }; + led@6 { + label = "twr3:green"; + gpios = <&sgpio_out0 11 0 GPIO_ACTIVE_LOW>; + }; + led@7 { + label = "twr3:yellow"; + gpios = <&sgpio_out0 11 1 GPIO_ACTIVE_LOW>; + }; + led@8 { + label = "eth12:green"; + gpios = <&sgpio_out0 12 0 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + led@9 { + label = "eth12:yellow"; + gpios = <&sgpio_out0 12 1 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + led@10 { + label = "eth13:green"; + gpios = <&sgpio_out0 13 0 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + led@11 { + label = "eth13:yellow"; + gpios = <&sgpio_out0 13 1 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + led@12 { + label = "eth14:green"; + gpios = <&sgpio_out0 14 0 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + led@13 { + label = "eth14:yellow"; + gpios = <&sgpio_out0 14 1 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + led@14 { + label = "eth15:green"; + gpios = <&sgpio_out0 15 0 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + led@15 { + label = "eth15:yellow"; + gpios = <&sgpio_out0 15 1 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + led@16 { + label = "eth48:green"; + gpios = <&sgpio_out1 16 0 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + led@17 { + label = "eth48:yellow"; + gpios = <&sgpio_out1 16 1 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + led@18 { + label = "eth49:green"; + gpios = <&sgpio_out1 17 0 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + led@19 { + label = "eth49:yellow"; + gpios = <&sgpio_out1 17 1 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + led@20 { + label = "eth50:green"; + gpios = <&sgpio_out1 18 0 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + led@21 { + label = "eth50:yellow"; + gpios = <&sgpio_out1 18 1 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + led@22 { + label = "eth51:green"; + gpios = <&sgpio_out1 19 0 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + led@23 { + label = "eth51:yellow"; + gpios = <&sgpio_out1 19 1 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + led@24 { + label = "eth52:green"; + gpios = <&sgpio_out1 20 0 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + led@25 { + label = "eth52:yellow"; + gpios = <&sgpio_out1 20 1 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + led@26 { + label = "eth53:green"; + gpios = <&sgpio_out1 21 0 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + led@27 { + label = "eth53:yellow"; + gpios = <&sgpio_out1 21 1 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + led@28 { + label = "eth54:green"; + gpios = <&sgpio_out1 22 0 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + led@29 { + label = "eth54:yellow"; + gpios = <&sgpio_out1 22 1 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + led@30 { + label = "eth55:green"; + gpios = <&sgpio_out1 23 0 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + led@31 { + label = "eth55:yellow"; + gpios = <&sgpio_out1 23 1 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + led@32 { + label = "eth56:green"; + gpios = <&sgpio_out1 24 0 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + led@33 { + label = "eth56:yellow"; + gpios = <&sgpio_out1 24 1 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + led@34 { + label = "eth57:green"; + gpios = <&sgpio_out1 25 0 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + led@35 { + label = "eth57:yellow"; + gpios = <&sgpio_out1 25 1 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + led@36 { + label = "eth58:green"; + gpios = <&sgpio_out1 26 0 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + led@37 { + label = "eth58:yellow"; + gpios = <&sgpio_out1 26 1 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + led@38 { + label = "eth59:green"; + gpios = <&sgpio_out1 27 0 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + led@39 { + label = "eth59:yellow"; + gpios = <&sgpio_out1 27 1 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + led@40 { + label = "eth60:green"; + gpios = <&sgpio_out1 28 0 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + led@41 { + label = "eth60:yellow"; + gpios = <&sgpio_out1 28 1 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + led@42 { + label = "eth61:green"; + gpios = <&sgpio_out1 29 0 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + led@43 { + label = "eth61:yellow"; + gpios = <&sgpio_out1 29 1 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + led@44 { + label = "eth62:green"; + gpios = <&sgpio_out1 30 0 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + led@45 { + label = "eth62:yellow"; + gpios = <&sgpio_out1 30 1 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + led@46 { + label = "eth63:green"; + gpios = <&sgpio_out1 31 0 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + led@47 { + label = "eth63:yellow"; + gpios = <&sgpio_out1 31 1 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + }; }; &spi0 { @@ -54,6 +290,28 @@ spi-flash@9 { }; }; +&sgpio0 { + status = "okay"; + microchip,sgpio-port-ranges = <8 15>; + gpio@0 { + ngpios = <64>; + }; + gpio@1 { + ngpios = <64>; + }; +}; + +&sgpio1 { + status = "okay"; + microchip,sgpio-port-ranges = <24 31>; + gpio@0 { + ngpios = <64>; + }; + gpio@1 { + ngpios = <64>; + }; +}; + &gpio { i2cmux_pins_i: i2cmux-pins-i { pins = "GPIO_16", "GPIO_17", "GPIO_18", "GPIO_19", diff --git a/arch/arm64/boot/dts/microchip/sparx5_pcb135_board.dtsi b/arch/arm64/boot/dts/microchip/sparx5_pcb135_board.dtsi index 7de66806b14b..66381271bef9 100644 --- a/arch/arm64/boot/dts/microchip/sparx5_pcb135_board.dtsi +++ b/arch/arm64/boot/dts/microchip/sparx5_pcb135_board.dtsi @@ -20,6 +20,50 @@ gpio-restart { gpios = <&gpio 37 GPIO_ACTIVE_LOW>; priority = <200>; }; + + leds { + compatible = "gpio-leds"; + led@0 { + label = "eth60:yellow"; + gpios = <&sgpio_out1 28 0 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + led@1 { + label = "eth60:green"; + gpios = <&sgpio_out1 28 1 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + led@2 { + label = "eth61:yellow"; + gpios = <&sgpio_out1 29 0 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + led@3 { + label = "eth61:green"; + gpios = <&sgpio_out1 29 1 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + led@4 { + label = "eth62:yellow"; + gpios = <&sgpio_out1 30 0 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + led@5 { + label = "eth62:green"; + gpios = <&sgpio_out1 30 1 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + led@6 { + label = "eth63:yellow"; + gpios = <&sgpio_out1 31 0 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + led@7 { + label = "eth63:green"; + gpios = <&sgpio_out1 31 1 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + }; }; &gpio { @@ -67,6 +111,17 @@ spi-flash@9 { }; }; +&sgpio1 { + status = "okay"; + microchip,sgpio-port-ranges = <24 31>; + gpio@0 { + ngpios = <64>; + }; + gpio@1 { + ngpios = <64>; + }; +}; + &axi { i2c0_imux: i2c0-imux@0 { compatible = "i2c-mux-pinctrl";