From patchwork Fri Oct 16 12:06:19 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 8bit X-Patchwork-Submitter: Jacopo Mondi X-Patchwork-Id: 11841181 Return-Path: Received: from mail.kernel.org (pdx-korg-mail-1.web.codeaurora.org [172.30.200.123]) by pdx-korg-patchwork-2.web.codeaurora.org (Postfix) with ESMTP id 635CF17C9 for ; Fri, 16 Oct 2020 10:07:01 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by mail.kernel.org (Postfix) with ESMTP id 468BA20EDD for ; Fri, 16 Oct 2020 10:07:01 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S2406551AbgJPKHA (ORCPT ); Fri, 16 Oct 2020 06:07:00 -0400 Received: from relay4-d.mail.gandi.net ([217.70.183.196]:49211 "EHLO relay4-d.mail.gandi.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S2406537AbgJPKHA (ORCPT ); Fri, 16 Oct 2020 06:07:00 -0400 X-Originating-IP: 93.34.118.233 Received: from uno.lan (93-34-118-233.ip49.fastwebnet.it [93.34.118.233]) (Authenticated sender: jacopo@jmondi.org) by relay4-d.mail.gandi.net (Postfix) with ESMTPSA id 13909E0003; Fri, 16 Oct 2020 10:06:53 +0000 (UTC) From: Jacopo Mondi To: kieran.bingham+renesas@ideasonboard.com, laurent.pinchart+renesas@ideasonboard.com, niklas.soderlund+renesas@ragnatech.se Cc: Jacopo Mondi , linux-media@vger.kernel.org, linux-renesas-soc@vger.kernel.org, linux-kernel@vger.kernel.org, Hyun Kwon , Manivannan Sadhasivam Subject: [PATCH v3 1/7] media: i2c: Add driver for RDACM21 camera module Date: Fri, 16 Oct 2020 14:06:19 +0200 Message-Id: <20201016120625.64337-2-jacopo+renesas@jmondi.org> X-Mailer: git-send-email 2.28.0 In-Reply-To: <20201016120625.64337-1-jacopo+renesas@jmondi.org> References: <20201016120625.64337-1-jacopo+renesas@jmondi.org> MIME-Version: 1.0 Precedence: bulk List-ID: X-Mailing-List: linux-media@vger.kernel.org The RDACM21 is a GMSL camera supporting 1280x1080 resolution images developed by IMI based on an Omnivision OV10640 sensor, an Omnivision OV490 ISP and a Maxim MAX9271 GMSL serializer. The driver uses the max9271 library module, to maximize code reuse with other camera module drivers using the same serializer, such as rdacm20. Signed-off-by: Jacopo Mondi --- MAINTAINERS | 12 + drivers/media/i2c/Kconfig | 13 + drivers/media/i2c/Makefile | 2 + drivers/media/i2c/rdacm21.c | 538 ++++++++++++++++++++++++++++++++++++ 4 files changed, 565 insertions(+) create mode 100644 drivers/media/i2c/rdacm21.c diff --git a/MAINTAINERS b/MAINTAINERS index 05ebf59d7685..574fe011c661 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -14668,6 +14668,18 @@ F: drivers/media/i2c/max9271.c F: drivers/media/i2c/max9271.h F: drivers/media/i2c/rdacm20.c +RDACM21 Camera Sensor +M: Jacopo Mondi +M: Kieran Bingham +M: Laurent Pinchart +M: Niklas Söderlund +L: linux-media@vger.kernel.org +S: Maintained +F: Documentation/devicetree/bindings/media/i2c/rdacm2x-gmsl.yaml +F: drivers/media/i2c/max9271.c +F: drivers/media/i2c/max9271.h +F: drivers/media/i2c/rdacm21.c + RDC R-321X SoC M: Florian Fainelli S: Maintained diff --git a/drivers/media/i2c/Kconfig b/drivers/media/i2c/Kconfig index 878f66ef2719..cfb3f0bcc4fc 100644 --- a/drivers/media/i2c/Kconfig +++ b/drivers/media/i2c/Kconfig @@ -1184,6 +1184,19 @@ config VIDEO_RDACM20 This camera should be used in conjunction with a GMSL deserialiser such as the MAX9286. +config VIDEO_RDACM21 + tristate "IMI RDACM21 camera support" + depends on I2C + select V4L2_FWNODE + select VIDEO_V4L2_SUBDEV_API + select MEDIA_CONTROLLER + help + This driver supports the IMI RDACM21 GMSL camera, used in + ADAS systems. + + This camera should be used in conjunction with a GMSL + deserialiser such as the MAX9286. + config VIDEO_RJ54N1 tristate "Sharp RJ54N1CB0C sensor support" depends on I2C && VIDEO_V4L2 diff --git a/drivers/media/i2c/Makefile b/drivers/media/i2c/Makefile index f0a77473979d..f3641b58929d 100644 --- a/drivers/media/i2c/Makefile +++ b/drivers/media/i2c/Makefile @@ -122,6 +122,8 @@ obj-$(CONFIG_VIDEO_IMX355) += imx355.o obj-$(CONFIG_VIDEO_MAX9286) += max9286.o rdacm20-camera_module-objs := rdacm20.o max9271.o obj-$(CONFIG_VIDEO_RDACM20) += rdacm20-camera_module.o +rdacm21-camera_module-objs := rdacm21.o max9271.o +obj-$(CONFIG_VIDEO_RDACM21) += rdacm21-camera_module.o obj-$(CONFIG_VIDEO_ST_MIPID02) += st-mipid02.o obj-$(CONFIG_SDR_MAX2175) += max2175.o diff --git a/drivers/media/i2c/rdacm21.c b/drivers/media/i2c/rdacm21.c new file mode 100644 index 000000000000..279cbe213f32 --- /dev/null +++ b/drivers/media/i2c/rdacm21.c @@ -0,0 +1,538 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * IMI RDACM21 GMSL Camera Driver + * + * Copyright (C) 2017-2020 Jacopo Mondi + * Copyright (C) 2017-2019 Kieran Bingham + * Copyright (C) 2017-2019 Laurent Pinchart + * Copyright (C) 2017-2019 Niklas Söderlund + * Copyright (C) 2016 Renesas Electronics Corporation + * Copyright (C) 2015 Cogent Embedded, Inc. + */ + +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include "max9271.h" + +#define OV10640_I2C_ADDRESS 0x30 +#define OV10640_ID_LOW 0xa6 + +#define OV490_I2C_ADDRESS 0x24 + +#define OV490_ISP_HSIZE_LOW 0x60 +#define OV490_ISP_HSIZE_HIGH 0x61 +#define OV490_ISP_VSIZE_LOW 0x62 +#define OV490_ISP_VSIZE_HIGH 0x63 + +#define OV490_PID 0x300a +#define OV490_VER 0x300b +#define OV490_ID_VAL 0x0490 +#define OV490_ID(_p, _v) ((((_p) & 0xff) << 8) | ((_v) & 0xff)) + +#define OV10640_PIXEL_RATE (55000000) + +struct rdacm21_device { + struct device *dev; + struct max9271_device *serializer; + struct i2c_client *isp; + struct v4l2_subdev sd; + struct media_pad pad; + struct v4l2_mbus_framefmt fmt; + struct v4l2_ctrl_handler ctrls; + u32 addrs[32]; +}; + +static inline struct rdacm21_device *sd_to_rdacm21(struct v4l2_subdev *sd) +{ + return container_of(sd, struct rdacm21_device, sd); +} + +static inline struct rdacm21_device *i2c_to_rdacm21(struct i2c_client *client) +{ + return sd_to_rdacm21(i2c_get_clientdata(client)); +} + +static const struct ov490_reg { + u16 reg; + u8 val; +} ov490_regs_wizard[] = { + {0xfffd, 0x80}, + {0xfffe, 0x82}, + {0x0071, 0x11}, + {0x0075, 0x11}, + {0xfffe, 0x29}, + {0x6010, 0x01}, + /* + * OV490 EMB line disable in YUV and RAW data, + * NOTE: EMB line is still used in ISP and sensor + */ + {0xe000, 0x14}, + {0xfffe, 0x28}, + {0x6000, 0x04}, + {0x6004, 0x00}, + /* + * PCLK polarity - useless due to silicon bug. + * Use 0x808000bb register instead. + */ + {0x6008, 0x00}, + {0xfffe, 0x80}, + {0x0091, 0x00}, + /* bit[3]=0 - PCLK polarity workaround. */ + {0x00bb, 0x1d}, + /* Ov490 FSIN: app_fsin_from_fsync */ + {0xfffe, 0x85}, + {0x0008, 0x00}, + {0x0009, 0x01}, + /* FSIN0 source. */ + {0x000A, 0x05}, + {0x000B, 0x00}, + /* FSIN0 delay. */ + {0x0030, 0x02}, + {0x0031, 0x00}, + {0x0032, 0x00}, + {0x0033, 0x00}, + /* FSIN1 delay. */ + {0x0038, 0x02}, + {0x0039, 0x00}, + {0x003A, 0x00}, + {0x003B, 0x00}, + /* FSIN0 length. */ + {0x0070, 0x2C}, + {0x0071, 0x01}, + {0x0072, 0x00}, + {0x0073, 0x00}, + /* FSIN1 length. */ + {0x0074, 0x64}, + {0x0075, 0x00}, + {0x0076, 0x00}, + {0x0077, 0x00}, + {0x0000, 0x14}, + {0x0001, 0x00}, + {0x0002, 0x00}, + {0x0003, 0x00}, + /* + * Load fsin0,load fsin1,load other, + * It will be cleared automatically. + */ + {0x0004, 0x32}, + {0x0005, 0x00}, + {0x0006, 0x00}, + {0x0007, 0x00}, + {0xfffe, 0x80}, + /* Sensor FSIN. */ + {0x0081, 0x00}, + /* ov10640 FSIN enable */ + {0xfffe, 0x19}, + {0x5000, 0x00}, + {0x5001, 0x30}, + {0x5002, 0x8c}, + {0x5003, 0xb2}, + {0xfffe, 0x80}, + {0x00c0, 0xc1}, + /* ov10640 HFLIP=1 by default */ + {0xfffe, 0x19}, + {0x5000, 0x01}, + {0x5001, 0x00}, + {0xfffe, 0x80}, + {0x00c0, 0xdc}, +}; + +static int ov490_read(struct rdacm21_device *dev, u16 reg, u8 *val) +{ + u8 buf[2] = { reg >> 8, reg & 0xff }; + int ret; + + ret = i2c_master_send(dev->isp, buf, 2); + if (ret == 2) + ret = i2c_master_recv(dev->isp, val, 1); + + if (ret < 0) { + dev_dbg(dev->dev, "%s: register 0x%04x read failed (%d)\n", + __func__, reg, ret); + return ret; + } + + return 0; +} + +static int ov490_write(struct rdacm21_device *dev, u16 reg, u8 val) +{ + u8 buf[3] = { reg >> 8, reg & 0xff, val }; + int ret; + + dev_dbg(dev->dev, "%s: 0x%04x = 0x%02x\n", __func__, reg, val); + + ret = i2c_master_send(dev->isp, buf, 3); + if (ret < 0) { + dev_err(dev->dev, "%s: register 0x%04x write failed (%d)\n", + __func__, reg, ret); + return ret; + } + + return 0; +} + +static int rdacm21_s_stream(struct v4l2_subdev *sd, int enable) +{ + struct rdacm21_device *dev = sd_to_rdacm21(sd); + + /* + * Enable serial link now that the ISP provides a valid pixel clock + * to start serializing video data on the GMSL link. + */ + return max9271_set_serial_link(dev->serializer, enable); +} + +static int rdacm21_enum_mbus_code(struct v4l2_subdev *sd, + struct v4l2_subdev_pad_config *cfg, + struct v4l2_subdev_mbus_code_enum *code) +{ + if (code->pad || code->index > 0) + return -EINVAL; + + code->code = MEDIA_BUS_FMT_YUYV8_1X16; + + return 0; +} + +static int rdacm21_get_fmt(struct v4l2_subdev *sd, + struct v4l2_subdev_pad_config *cfg, + struct v4l2_subdev_format *format) +{ + struct v4l2_mbus_framefmt *mf = &format->format; + struct rdacm21_device *dev = sd_to_rdacm21(sd); + + if (format->pad) + return -EINVAL; + + mf->width = dev->fmt.width; + mf->height = dev->fmt.height; + mf->code = MEDIA_BUS_FMT_YUYV8_1X16; + mf->colorspace = V4L2_COLORSPACE_SRGB; + mf->field = V4L2_FIELD_NONE; + mf->ycbcr_enc = V4L2_YCBCR_ENC_601; + mf->quantization = V4L2_QUANTIZATION_FULL_RANGE; + mf->xfer_func = V4L2_XFER_FUNC_NONE; + + return 0; +} + +static struct v4l2_subdev_video_ops rdacm21_video_ops = { + .s_stream = rdacm21_s_stream, +}; + +static const struct v4l2_subdev_pad_ops rdacm21_subdev_pad_ops = { + .enum_mbus_code = rdacm21_enum_mbus_code, + .get_fmt = rdacm21_get_fmt, + .set_fmt = rdacm21_get_fmt, +}; + +static struct v4l2_subdev_ops rdacm21_subdev_ops = { + .video = &rdacm21_video_ops, + .pad = &rdacm21_subdev_pad_ops, +}; + +static int ov490_initialize(struct rdacm21_device *dev) +{ + unsigned int ov490_pid_retry = 20; + unsigned int timeout; + u8 pid, ver, val; + unsigned int i; + int ret; + + /* Read OV490 Id to test communications. */ +pid_retry: + ret = ov490_write(dev, 0xfffd, 0x80); + ret = ov490_write(dev, 0xfffe, 0x80); + usleep_range(100, 150); + + ret = ov490_read(dev, OV490_PID, &pid); + if (ret < 0) { + /* Give OV490 a few more cycles to exit from reset. */ + if (ov490_pid_retry--) { + usleep_range(500, 1000); + goto pid_retry; + } + + dev_err(dev->dev, "OV490 PID read failed (%d)\n", ret); + return ret; + } + + ret = ov490_read(dev, OV490_VER, &ver); + if (ret < 0) { + dev_err(dev->dev, "OV490 VERSION read failed (%d)\n", ret); + return ret; + } + + if (OV490_ID(pid, ver) != OV490_ID_VAL) { + dev_err(dev->dev, "OV490 ID mismatch: (0x%04x)\n", + OV490_ID(pid, ver)); + return -ENODEV; + } + + /* Wait for firmware boot by reading streamon status. */ + ov490_write(dev, 0xfffd, 0x80); + ov490_write(dev, 0xfffe, 0x29); + usleep_range(100, 150); + for (timeout = 300; timeout > 0; timeout--) { + ov490_read(dev, 0xd000, &val); + if (val == 0x0c) + break; + mdelay(1); + } + if (!timeout) { + dev_err(dev->dev, "Timeout firmware boot wait\n"); + return -ENODEV; + } + dev_dbg(dev->dev, "Firmware booted in %u msec\n", 300 - timeout); + + /* Read OV10640 Id to test communications. */ + ov490_write(dev, 0xfffd, 0x80); + ov490_write(dev, 0xfffe, 0x19); + usleep_range(100, 150); + + ov490_write(dev, 0x5000, 0x01); + ov490_write(dev, 0x5001, 0x30); + ov490_write(dev, 0x5002, 0x0a); + + ov490_write(dev, 0xfffe, 0x80); + usleep_range(100, 150); + ov490_write(dev, 0xc0, 0xc1); + ov490_write(dev, 0xfffe, 0x19); + usleep_range(1000, 1500); + ov490_read(dev, 0x5000, &val); + if (val != OV10640_ID_LOW) { + dev_err(dev->dev, "OV10640 ID mismatch: (0x%02x)\n", val); + return -ENODEV; + } + + dev_dbg(dev->dev, "OV10640 ID = 0x%2x\n", val); + + for (i = 0; i < ARRAY_SIZE(ov490_regs_wizard); ++i) { + ret = ov490_write(dev, ov490_regs_wizard[i].reg, + ov490_regs_wizard[i].val); + if (ret < 0) { + dev_err(dev->dev, + "%s: register %u (0x%04x) write failed (%d)\n", + __func__, i, ov490_regs_wizard[i].reg, ret); + + return -EIO; + } + + usleep_range(100, 150); + } + + /* + * The ISP is programmed with the content of a serial flash memory. + * Read the firmware configuration to reflect it through the V4L2 APIs. + */ + ov490_write(dev, 0xfffd, 0x80); + ov490_write(dev, 0xfffe, 0x82); + usleep_range(100, 150); + ov490_read(dev, OV490_ISP_HSIZE_HIGH, &val); + dev->fmt.width = (val & 0xf) << 8; + ov490_read(dev, OV490_ISP_HSIZE_LOW, &val); + dev->fmt.width |= (val & 0xff); + + ov490_read(dev, OV490_ISP_VSIZE_HIGH, &val); + dev->fmt.height = (val & 0xf) << 8; + ov490_read(dev, OV490_ISP_VSIZE_LOW, &val); + dev->fmt.height |= val & 0xff; + + /* Set bus width to 12 bits [0:11] */ + ov490_write(dev, 0xfffd, 0x80); + ov490_write(dev, 0xfffe, 0x28); + usleep_range(100, 150); + ov490_write(dev, 0x6009, 0x10); + + dev_info(dev->dev, "Identified RDACM21 camera module\n"); + + return 0; +} + +static int rdacm21_initialize(struct rdacm21_device *dev) +{ + int ret; + + /* Verify communication with the MAX9271: ping to wakeup. */ + dev->serializer->client->addr = MAX9271_DEFAULT_ADDR; + i2c_smbus_read_byte(dev->serializer->client); + + /* Serial link disabled during config as it needs a valid pixel clock. */ + ret = max9271_set_serial_link(dev->serializer, false); + if (ret) + return ret; + + /* Set GPO high to hold OV490 in reset during max9271 configuration. */ + ret = max9271_set_gpios(dev->serializer, MAX9271_GPO); + if (ret) + return ret; + + /* Configure I2C bus at 105Kbps speed and configure GMSL link. */ + ret = max9271_configure_i2c(dev->serializer, + MAX9271_I2CSLVSH_469NS_234NS | + MAX9271_I2CSLVTO_1024US | + MAX9271_I2CMSTBT_105KBPS); + if (ret) + return ret; + + ret = max9271_configure_gmsl_link(dev->serializer); + if (ret) + return ret; + + ret = max9271_set_address(dev->serializer, dev->addrs[0]); + if (ret) + return ret; + dev->serializer->client->addr = dev->addrs[0]; + + /* + * Release OV490 from reset and program address translation + * before performing OV490 configuration. + */ + ret = max9271_clear_gpios(dev->serializer, MAX9271_GPO); + if (ret) + return ret; + + ret = max9271_set_translation(dev->serializer, dev->addrs[1], + OV490_I2C_ADDRESS); + if (ret) + return ret; + dev->isp->addr = dev->addrs[1]; + + ret = ov490_initialize(dev); + if (ret) + return ret; + + /* + * Set reverse channel high threshold to increase noise immunity. + * + * This should be compensated by increasing the reverse channel + * amplitude on the remote deserializer side. + */ + ret = max9271_set_high_threshold(dev->serializer, true); + if (ret) + return ret; + + return 0; +} + +static int rdacm21_probe(struct i2c_client *client) +{ + struct rdacm21_device *dev; + struct fwnode_handle *ep; + int ret; + + dev = devm_kzalloc(&client->dev, sizeof(*dev), GFP_KERNEL); + if (!dev) + return -ENOMEM; + dev->dev = &client->dev; + + dev->serializer = devm_kzalloc(&client->dev, sizeof(*dev->serializer), + GFP_KERNEL); + if (!dev->serializer) + return -ENOMEM; + + dev->serializer->client = client; + + ret = of_property_read_u32_array(client->dev.of_node, "reg", + dev->addrs, 2); + if (ret < 0) { + dev_err(dev->dev, "Invalid DT reg property: %d\n", ret); + return -EINVAL; + } + + /* Create the dummy I2C client for the sensor. */ + dev->isp = i2c_new_dummy_device(client->adapter, OV490_I2C_ADDRESS); + if (IS_ERR(dev->isp)) + return PTR_ERR(dev->isp); + + ret = rdacm21_initialize(dev); + if (ret < 0) + goto error; + + /* Initialize and register the subdevice. */ + v4l2_i2c_subdev_init(&dev->sd, client, &rdacm21_subdev_ops); + dev->sd.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE; + + v4l2_ctrl_handler_init(&dev->ctrls, 1); + v4l2_ctrl_new_std(&dev->ctrls, NULL, V4L2_CID_PIXEL_RATE, + OV10640_PIXEL_RATE, OV10640_PIXEL_RATE, 1, + OV10640_PIXEL_RATE); + dev->sd.ctrl_handler = &dev->ctrls; + + ret = dev->ctrls.error; + if (ret) + goto error_free_ctrls; + + dev->pad.flags = MEDIA_PAD_FL_SOURCE; + dev->sd.entity.flags |= MEDIA_ENT_F_CAM_SENSOR; + ret = media_entity_pads_init(&dev->sd.entity, 1, &dev->pad); + if (ret < 0) + goto error_free_ctrls; + + ep = fwnode_graph_get_next_endpoint(dev_fwnode(&client->dev), NULL); + if (!ep) { + dev_err(&client->dev, + "Unable to get endpoint in node %pOF\n", + client->dev.of_node); + ret = -ENOENT; + goto error_free_ctrls; + } + dev->sd.fwnode = ep; + + ret = v4l2_async_register_subdev(&dev->sd); + if (ret) + goto error_put_node; + + return 0; + +error_put_node: + fwnode_handle_put(dev->sd.fwnode); +error_free_ctrls: + v4l2_ctrl_handler_free(&dev->ctrls); +error: + i2c_unregister_device(dev->isp); + + return ret; +} + +static int rdacm21_remove(struct i2c_client *client) +{ + struct rdacm21_device *dev = i2c_to_rdacm21(client); + + fwnode_handle_put(dev->sd.fwnode); + v4l2_async_unregister_subdev(&dev->sd); + i2c_unregister_device(dev->isp); + + return 0; +} + +static const struct of_device_id rdacm21_of_ids[] = { + { .compatible = "imi,rdacm21" }, + { } +}; +MODULE_DEVICE_TABLE(of, rdacm21_of_ids); + +static struct i2c_driver rdacm21_i2c_driver = { + .driver = { + .name = "rdacm21", + .of_match_table = rdacm21_of_ids, + }, + .probe_new = rdacm21_probe, + .remove = rdacm21_remove, +}; + +module_i2c_driver(rdacm21_i2c_driver); + +MODULE_DESCRIPTION("GMSL Camera driver for RDACM21"); +MODULE_AUTHOR("Jacopo Mondi, Kieran Bingham, Laurent Pinchart, Niklas Söderlund, Vladimir Barinov"); +MODULE_LICENSE("GPL v2"); From patchwork Fri Oct 16 12:06:20 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Jacopo Mondi X-Patchwork-Id: 11841185 Return-Path: Received: from mail.kernel.org (pdx-korg-mail-1.web.codeaurora.org [172.30.200.123]) by pdx-korg-patchwork-2.web.codeaurora.org (Postfix) with ESMTP id 6923B14B5 for ; Fri, 16 Oct 2020 10:07:08 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by mail.kernel.org (Postfix) with ESMTP id 5114D2084C for ; Fri, 16 Oct 2020 10:07:08 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S2406562AbgJPKHE (ORCPT ); Fri, 16 Oct 2020 06:07:04 -0400 Received: from relay4-d.mail.gandi.net ([217.70.183.196]:42911 "EHLO relay4-d.mail.gandi.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S2406546AbgJPKHA (ORCPT ); Fri, 16 Oct 2020 06:07:00 -0400 X-Originating-IP: 93.34.118.233 Received: from uno.lan (93-34-118-233.ip49.fastwebnet.it [93.34.118.233]) (Authenticated sender: jacopo@jmondi.org) by relay4-d.mail.gandi.net (Postfix) with ESMTPSA id BAFC7E000A; Fri, 16 Oct 2020 10:06:56 +0000 (UTC) From: Jacopo Mondi To: kieran.bingham+renesas@ideasonboard.com, laurent.pinchart+renesas@ideasonboard.com, niklas.soderlund+renesas@ragnatech.se Cc: Jacopo Mondi , linux-media@vger.kernel.org, linux-renesas-soc@vger.kernel.org, linux-kernel@vger.kernel.org, Hyun Kwon , Manivannan Sadhasivam Subject: [PATCH v3 2/7] dt-bindings: media: max9286: Document 'maxim,high-threshold' Date: Fri, 16 Oct 2020 14:06:20 +0200 Message-Id: <20201016120625.64337-3-jacopo+renesas@jmondi.org> X-Mailer: git-send-email 2.28.0 In-Reply-To: <20201016120625.64337-1-jacopo+renesas@jmondi.org> References: <20201016120625.64337-1-jacopo+renesas@jmondi.org> MIME-Version: 1.0 Precedence: bulk List-ID: X-Mailing-List: linux-media@vger.kernel.org Document the 'maxim,high-threshold' vendor property in the bindings document of the max9286 driver. The newly introduced boolean property allows controlling the initial configuration of the GMSL reverse control channel to accommodate remote serializers pre-programmed with the high threshold power supply noise immunity enabled. Signed-off-by: Jacopo Mondi --- .../bindings/media/i2c/maxim,max9286.yaml | 15 +++++++++++++++ 1 file changed, 15 insertions(+) diff --git a/Documentation/devicetree/bindings/media/i2c/maxim,max9286.yaml b/Documentation/devicetree/bindings/media/i2c/maxim,max9286.yaml index 9ea827092fdd..50e08a7d3204 100644 --- a/Documentation/devicetree/bindings/media/i2c/maxim,max9286.yaml +++ b/Documentation/devicetree/bindings/media/i2c/maxim,max9286.yaml @@ -51,6 +51,19 @@ properties: '#gpio-cells': const: 2 + maxim,high-threshold: + description: | + A boolean property to increase the initial amplitude of the reverse + control channel to compensate for remote serializers pre-programmed with + high threshold noise-immunity. + + Some camera modules (in example the RDACM20 one) include an on-board MCU + that pre-programs the embedded serializer with reverse channel power + supply noise immunity enabled. The deserializer shall increase its + reverse channel amplitude to compensate that and be able to communicate + with the remote end. + type: boolean + ports: type: object description: | @@ -243,6 +256,8 @@ examples: gpio-controller; #gpio-cells = <2>; + maxim,high-threshold; + ports { #address-cells = <1>; #size-cells = <0>; From patchwork Fri Oct 16 12:06:21 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Jacopo Mondi X-Patchwork-Id: 11841205 Return-Path: Received: from mail.kernel.org (pdx-korg-mail-1.web.codeaurora.org [172.30.200.123]) by pdx-korg-patchwork-2.web.codeaurora.org (Postfix) with ESMTP id EA90016BC for ; Fri, 16 Oct 2020 10:08:00 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by mail.kernel.org (Postfix) with ESMTP id D0D0E20848 for ; Fri, 16 Oct 2020 10:08:00 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S2406576AbgJPKHK (ORCPT ); Fri, 16 Oct 2020 06:07:10 -0400 Received: from relay4-d.mail.gandi.net ([217.70.183.196]:49505 "EHLO relay4-d.mail.gandi.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S2406557AbgJPKHD (ORCPT ); Fri, 16 Oct 2020 06:07:03 -0400 X-Originating-IP: 93.34.118.233 Received: from uno.lan (93-34-118-233.ip49.fastwebnet.it [93.34.118.233]) (Authenticated sender: jacopo@jmondi.org) by relay4-d.mail.gandi.net (Postfix) with ESMTPSA id C6659E0017; Fri, 16 Oct 2020 10:06:58 +0000 (UTC) From: Jacopo Mondi To: kieran.bingham+renesas@ideasonboard.com, laurent.pinchart+renesas@ideasonboard.com, niklas.soderlund+renesas@ragnatech.se Cc: Jacopo Mondi , linux-media@vger.kernel.org, linux-renesas-soc@vger.kernel.org, linux-kernel@vger.kernel.org, Hyun Kwon , Manivannan Sadhasivam , Kieran Bingham Subject: [PATCH v3 3/7] media: i2c: max9286: Break-out reverse channel setup Date: Fri, 16 Oct 2020 14:06:21 +0200 Message-Id: <20201016120625.64337-4-jacopo+renesas@jmondi.org> X-Mailer: git-send-email 2.28.0 In-Reply-To: <20201016120625.64337-1-jacopo+renesas@jmondi.org> References: <20201016120625.64337-1-jacopo+renesas@jmondi.org> MIME-Version: 1.0 Precedence: bulk List-ID: X-Mailing-List: linux-media@vger.kernel.org Break out the reverse channel setup configuration procedure to its own function. This change prepares for configuring the reverse channel conditionally to the remote side high threshold configuration. No functional changes intended. Reviewed-by: Kieran Bingham Signed-off-by: Jacopo Mondi --- drivers/media/i2c/max9286.c | 30 +++++++++++++++++------------- 1 file changed, 17 insertions(+), 13 deletions(-) diff --git a/drivers/media/i2c/max9286.c b/drivers/media/i2c/max9286.c index d969ac21a058..526b6e557dfb 100644 --- a/drivers/media/i2c/max9286.c +++ b/drivers/media/i2c/max9286.c @@ -336,6 +336,22 @@ static void max9286_configure_i2c(struct max9286_priv *priv, bool localack) usleep_range(3000, 5000); } +static void max9286_reverse_channel_setup(struct max9286_priv *priv) +{ + /* + * Reverse channel setup. + * + * - Enable custom reverse channel configuration (through register 0x3f) + * and set the first pulse length to 35 clock cycles. + * - Increase the reverse channel amplitude to 170mV to accommodate the + * high threshold enabled by the serializer driver. + */ + max9286_write(priv, 0x3f, MAX9286_EN_REV_CFG | MAX9286_REV_FLEN(35)); + max9286_write(priv, 0x3b, MAX9286_REV_TRF(1) | MAX9286_REV_AMP(70) | + MAX9286_REV_AMP_X); + usleep_range(2000, 2500); +} + /* * max9286_check_video_links() - Make sure video links are detected and locked * @@ -941,19 +957,7 @@ static int max9286_setup(struct max9286_priv *priv) * only. This should be disabled after the mux is initialised. */ max9286_configure_i2c(priv, true); - - /* - * Reverse channel setup. - * - * - Enable custom reverse channel configuration (through register 0x3f) - * and set the first pulse length to 35 clock cycles. - * - Increase the reverse channel amplitude to 170mV to accommodate the - * high threshold enabled by the serializer driver. - */ - max9286_write(priv, 0x3f, MAX9286_EN_REV_CFG | MAX9286_REV_FLEN(35)); - max9286_write(priv, 0x3b, MAX9286_REV_TRF(1) | MAX9286_REV_AMP(70) | - MAX9286_REV_AMP_X); - usleep_range(2000, 2500); + max9286_reverse_channel_setup(priv); /* * Enable GMSL links, mask unused ones and autodetect link From patchwork Fri Oct 16 12:06:22 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Jacopo Mondi X-Patchwork-Id: 11841197 Return-Path: Received: from mail.kernel.org (pdx-korg-mail-1.web.codeaurora.org [172.30.200.123]) by pdx-korg-patchwork-2.web.codeaurora.org (Postfix) with ESMTP id 2D6BC17C9 for ; Fri, 16 Oct 2020 10:07:27 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by mail.kernel.org (Postfix) with ESMTP id 1533F20848 for ; Fri, 16 Oct 2020 10:07:27 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S2406588AbgJPKHL (ORCPT ); Fri, 16 Oct 2020 06:07:11 -0400 Received: from relay4-d.mail.gandi.net ([217.70.183.196]:51793 "EHLO relay4-d.mail.gandi.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S2406559AbgJPKHF (ORCPT ); Fri, 16 Oct 2020 06:07:05 -0400 X-Originating-IP: 93.34.118.233 Received: from uno.lan (93-34-118-233.ip49.fastwebnet.it [93.34.118.233]) (Authenticated sender: jacopo@jmondi.org) by relay4-d.mail.gandi.net (Postfix) with ESMTPSA id CDA4EE0012; Fri, 16 Oct 2020 10:07:01 +0000 (UTC) From: Jacopo Mondi To: kieran.bingham+renesas@ideasonboard.com, laurent.pinchart+renesas@ideasonboard.com, niklas.soderlund+renesas@ragnatech.se Cc: Jacopo Mondi , linux-media@vger.kernel.org, linux-renesas-soc@vger.kernel.org, linux-kernel@vger.kernel.org, Hyun Kwon , Manivannan Sadhasivam Subject: [PATCH v3 4/7] media: i2c: max9286: Make channel amplitude programmable Date: Fri, 16 Oct 2020 14:06:22 +0200 Message-Id: <20201016120625.64337-5-jacopo+renesas@jmondi.org> X-Mailer: git-send-email 2.28.0 In-Reply-To: <20201016120625.64337-1-jacopo+renesas@jmondi.org> References: <20201016120625.64337-1-jacopo+renesas@jmondi.org> MIME-Version: 1.0 Precedence: bulk List-ID: X-Mailing-List: linux-media@vger.kernel.org Instrument the function that configures the reverse channel with a programmable amplitude value. This change serves to prepare to adjust the reverse channel amplitude depending on the remote end high-threshold configuration. Reviewed-by: Kieran Bingham Signed-off-by: Jacopo Mondi --- drivers/media/i2c/max9286.c | 22 ++++++++++++++++------ 1 file changed, 16 insertions(+), 6 deletions(-) diff --git a/drivers/media/i2c/max9286.c b/drivers/media/i2c/max9286.c index 526b6e557dfb..31e27d0f34f1 100644 --- a/drivers/media/i2c/max9286.c +++ b/drivers/media/i2c/max9286.c @@ -336,19 +336,29 @@ static void max9286_configure_i2c(struct max9286_priv *priv, bool localack) usleep_range(3000, 5000); } -static void max9286_reverse_channel_setup(struct max9286_priv *priv) +static void max9286_reverse_channel_setup(struct max9286_priv *priv, + unsigned int chan_amplitude) { + /* Reverse channel transmission time: default to 1. */ + u8 chan_config = MAX9286_REV_TRF(1); + /* * Reverse channel setup. * * - Enable custom reverse channel configuration (through register 0x3f) * and set the first pulse length to 35 clock cycles. - * - Increase the reverse channel amplitude to 170mV to accommodate the - * high threshold enabled by the serializer driver. + * - Adjust reverse channel amplitude: values > 130 are programmed + * using the additional +100mV REV_AMP_X boost flag */ max9286_write(priv, 0x3f, MAX9286_EN_REV_CFG | MAX9286_REV_FLEN(35)); - max9286_write(priv, 0x3b, MAX9286_REV_TRF(1) | MAX9286_REV_AMP(70) | - MAX9286_REV_AMP_X); + + if (chan_amplitude > 100) { + /* It is not possible to express values (100 < x < 130) */ + chan_amplitude = chan_amplitude < 130 + ? 30 : chan_amplitude - 100; + chan_config |= MAX9286_REV_AMP_X; + } + max9286_write(priv, 0x3b, chan_config | MAX9286_REV_AMP(chan_amplitude)); usleep_range(2000, 2500); } @@ -957,7 +967,7 @@ static int max9286_setup(struct max9286_priv *priv) * only. This should be disabled after the mux is initialised. */ max9286_configure_i2c(priv, true); - max9286_reverse_channel_setup(priv); + max9286_reverse_channel_setup(priv, 170); /* * Enable GMSL links, mask unused ones and autodetect link From patchwork Fri Oct 16 12:06:23 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Jacopo Mondi X-Patchwork-Id: 11841199 Return-Path: Received: from mail.kernel.org (pdx-korg-mail-1.web.codeaurora.org [172.30.200.123]) by pdx-korg-patchwork-2.web.codeaurora.org (Postfix) with ESMTP id AE03A14B5 for ; Fri, 16 Oct 2020 10:07:28 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by mail.kernel.org (Postfix) with ESMTP id 95BD920872 for ; Fri, 16 Oct 2020 10:07:28 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S2406583AbgJPKHL (ORCPT ); Fri, 16 Oct 2020 06:07:11 -0400 Received: from relay4-d.mail.gandi.net ([217.70.183.196]:36061 "EHLO relay4-d.mail.gandi.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S2406570AbgJPKHI (ORCPT ); Fri, 16 Oct 2020 06:07:08 -0400 X-Originating-IP: 93.34.118.233 Received: from uno.lan (93-34-118-233.ip49.fastwebnet.it [93.34.118.233]) (Authenticated sender: jacopo@jmondi.org) by relay4-d.mail.gandi.net (Postfix) with ESMTPSA id 2BC2AE0010; Fri, 16 Oct 2020 10:07:03 +0000 (UTC) From: Jacopo Mondi To: kieran.bingham+renesas@ideasonboard.com, laurent.pinchart+renesas@ideasonboard.com, niklas.soderlund+renesas@ragnatech.se Cc: Jacopo Mondi , linux-media@vger.kernel.org, linux-renesas-soc@vger.kernel.org, linux-kernel@vger.kernel.org, Hyun Kwon , Manivannan Sadhasivam Subject: [PATCH v3 5/7] media: i2c: max9286: Configure reverse channel amplitude Date: Fri, 16 Oct 2020 14:06:23 +0200 Message-Id: <20201016120625.64337-6-jacopo+renesas@jmondi.org> X-Mailer: git-send-email 2.28.0 In-Reply-To: <20201016120625.64337-1-jacopo+renesas@jmondi.org> References: <20201016120625.64337-1-jacopo+renesas@jmondi.org> MIME-Version: 1.0 Precedence: bulk List-ID: X-Mailing-List: linux-media@vger.kernel.org Adjust reverse channel amplitude according to the presence of the 'high-threshold" DTS property. If no high threshold compensation is required, start with a low amplitude (100mV) and increase it after the remote serializers have probed and have enabled noise immunity on their reverse channels. If high threshold compensation is required, configure the reverse channel with a 170mV amplitude before the remote serializers have probed. This change is required for both rdacm20 and rdacm21 camera modules to be correctly probed when used in combination with the max9286 deserializer. Signed-off-by: Jacopo Mondi Reviewed-by: Kieran Bingham --- drivers/media/i2c/max9286.c | 19 ++++++++++++++++++- 1 file changed, 18 insertions(+), 1 deletion(-) diff --git a/drivers/media/i2c/max9286.c b/drivers/media/i2c/max9286.c index 31e27d0f34f1..4c72e1e6b27b 100644 --- a/drivers/media/i2c/max9286.c +++ b/drivers/media/i2c/max9286.c @@ -163,6 +163,8 @@ struct max9286_priv { unsigned int mux_channel; bool mux_open; + bool high_threshold; + struct v4l2_ctrl_handler ctrls; struct v4l2_ctrl *pixelrate; @@ -557,10 +559,14 @@ static int max9286_notify_bound(struct v4l2_async_notifier *notifier, * All enabled sources have probed and enabled their reverse control * channels: * + * - Increase the reverse channel amplitude to compensate for the + * remote ends high threshold, if not done already * - Verify all configuration links are properly detected * - Disable auto-ack as communication on the control channel are now * stable. */ + if (!priv->high_threshold) + max9286_reverse_channel_setup(priv, 170); max9286_check_config_link(priv, priv->source_mask); /* @@ -967,7 +973,12 @@ static int max9286_setup(struct max9286_priv *priv) * only. This should be disabled after the mux is initialised. */ max9286_configure_i2c(priv, true); - max9286_reverse_channel_setup(priv, 170); + + /* + * Compensate the remote end high threshold with a larger channel + * amplitude if necessary. + */ + max9286_reverse_channel_setup(priv, priv->high_threshold ? 170 : 100); /* * Enable GMSL links, mask unused ones and autodetect link @@ -1235,6 +1246,12 @@ static int max9286_parse_dt(struct max9286_priv *priv) } of_node_put(node); + /* + * Parse 'high_threshold' property to configure the reverse channel + * amplitude. + */ + priv->high_threshold = device_property_present(dev, "high_threshold"); + priv->route_mask = priv->source_mask; return 0; From patchwork Fri Oct 16 12:06:24 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Jacopo Mondi X-Patchwork-Id: 11841189 Return-Path: Received: from mail.kernel.org (pdx-korg-mail-1.web.codeaurora.org [172.30.200.123]) by pdx-korg-patchwork-2.web.codeaurora.org (Postfix) with ESMTP id AF78414B5 for ; Fri, 16 Oct 2020 10:07:12 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by mail.kernel.org (Postfix) with ESMTP id 9530A20866 for ; Fri, 16 Oct 2020 10:07:12 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S2406557AbgJPKHL (ORCPT ); Fri, 16 Oct 2020 06:07:11 -0400 Received: from relay4-d.mail.gandi.net ([217.70.183.196]:36885 "EHLO relay4-d.mail.gandi.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S2406571AbgJPKHL (ORCPT ); Fri, 16 Oct 2020 06:07:11 -0400 X-Originating-IP: 93.34.118.233 Received: from uno.lan (93-34-118-233.ip49.fastwebnet.it [93.34.118.233]) (Authenticated sender: jacopo@jmondi.org) by relay4-d.mail.gandi.net (Postfix) with ESMTPSA id 441D1E000A; Fri, 16 Oct 2020 10:07:05 +0000 (UTC) From: Jacopo Mondi To: kieran.bingham+renesas@ideasonboard.com, laurent.pinchart+renesas@ideasonboard.com, niklas.soderlund+renesas@ragnatech.se Cc: Jacopo Mondi , linux-media@vger.kernel.org, linux-renesas-soc@vger.kernel.org, linux-kernel@vger.kernel.org, Hyun Kwon , Manivannan Sadhasivam Subject: [PATCH v3 6/7] arm64: dts: renesas: salvator-x: Add MAX9286 expansion board Date: Fri, 16 Oct 2020 14:06:24 +0200 Message-Id: <20201016120625.64337-7-jacopo+renesas@jmondi.org> X-Mailer: git-send-email 2.28.0 In-Reply-To: <20201016120625.64337-1-jacopo+renesas@jmondi.org> References: <20201016120625.64337-1-jacopo+renesas@jmondi.org> MIME-Version: 1.0 Precedence: bulk List-ID: X-Mailing-List: linux-media@vger.kernel.org From: Laurent Pinchart Add a .dtsi fragment to describe the MAX9286-based expansion board for the Renesas Salvator-X board. The MAX9286 expansion board has eight RDACM20 cameras connected to it. They can be individually controlled by enabling or disabling the macro defines. Signed-off-by: Laurent Pinchart Signed-off-by: Kieran Bingham --- v2: - Use SPDX headers - Remove link from ADV748x TXA (HDMI) - Use 0x31-0x38, and 0x41-0x48 for the 8 cameras. 0x30 and 0x40 are the base addresses for the OV10635 and MAX9271 (0x50 for the MCU) - Provide RDACM20 MCU I2C address reservations. (0x51-0x58) v3: - Fix gmsl-serializer@ i2c node addressing v6: - Make i2c-mux child node and update to be conformant to new bindings. v7: - Separate register arguments --- .../boot/dts/renesas/salvator-x-max9286.dtsi | 394 ++++++++++++++++++ 1 file changed, 394 insertions(+) create mode 100644 arch/arm64/boot/dts/renesas/salvator-x-max9286.dtsi diff --git a/arch/arm64/boot/dts/renesas/salvator-x-max9286.dtsi b/arch/arm64/boot/dts/renesas/salvator-x-max9286.dtsi new file mode 100644 index 000000000000..6f4798859542 --- /dev/null +++ b/arch/arm64/boot/dts/renesas/salvator-x-max9286.dtsi @@ -0,0 +1,394 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Device Tree Source for the Salvator-X MAX9286 expansion board + * + * Copyright (C) 2017 Ideas on Board + */ + +#include + +/* + * MAX9286 A + */ +#define MAXIM_CAMERA0 "imi,rdacm20" +#define MAXIM_CAMERA1 "imi,rdacm20" +#define MAXIM_CAMERA2 "imi,rdacm20" +#define MAXIM_CAMERA3 "imi,rdacm20" + +/* + * MAX9286 B + */ +#define MAXIM_CAMERA4 "imi,rdacm20" +#define MAXIM_CAMERA5 "imi,rdacm20" +#define MAXIM_CAMERA6 "imi,rdacm20" +#define MAXIM_CAMERA7 "imi,rdacm20" + +/ { +/* + * Powered MCU IMI cameras need delay between power-on and R-Car access + * to avoid I2C bus conflicts since the R-Car I2C does not support I2C + * multi-master. The I2C bus conflict would result in R-Car I2C IP stall. + */ +#define IMI_MCU_V0_DELAY 8000000 /* delay for powered MCU firmware v0 */ +#define IMI_MCU_V1_DELAY 3000000 /* delay for powered MCU firmware v1 */ +#define IMI_MCU_NO_DELAY 0 /* delay for unpowered MCU */ +#define IMI_MCU_DELAY IMI_MCU_V0_DELAY + + poc_12v: regulator-vcc-poc-12v { + compatible = "regulator-fixed"; + + regulator-name = "Camera PoC 12V"; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + startup-delay-us = <(250000 + IMI_MCU_DELAY)>; + + gpio = <&gpio6 30 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; +}; + +&vin0 { + status = "okay"; +}; + +&vin1 { + status = "okay"; +}; + +&vin2 { + status = "okay"; +}; + +&vin3 { + status = "okay"; +}; + +&vin4 { + status = "okay"; +}; + +&vin5 { + status = "okay"; +}; + +&vin6 { + status = "okay"; +}; + +&vin7 { + status = "okay"; +}; + +/* Disconnect the csi40 endpoint from the ADV748x TXA (HDMI) */ +&adv7482_txa { + /delete-property/ remote-endpoint; + status = "disabled"; +}; + +&csi40 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + csi40_in: endpoint { + clock-lanes = <0>; + data-lanes = <1 2 3 4>; + remote-endpoint = <&max9286_out0>; + }; + }; + }; +}; + +&csi41 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + csi41_in: endpoint { + clock-lanes = <0>; + data-lanes = <1 2 3 4>; + remote-endpoint = <&max9286_out1>; + }; + }; + }; +}; + +&i2c4 { + gmsl-deserializer@4c { + compatible = "maxim,max9286"; + reg = <0x4c>; + poc-supply = <&poc_12v>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + max9286_in0: endpoint { +#ifdef MAXIM_CAMERA0 + remote-endpoint = <&rdacm20_out0>; +#endif + }; + }; + + port@1 { + reg = <1>; + max9286_in1: endpoint { +#ifdef MAXIM_CAMERA1 + remote-endpoint = <&rdacm20_out1>; +#endif + }; + }; + + port@2 { + reg = <2>; + max9286_in2: endpoint { +#ifdef MAXIM_CAMERA2 + remote-endpoint = <&rdacm20_out2>; +#endif + }; + }; + + port@3 { + reg = <3>; + max9286_in3: endpoint { +#ifdef MAXIM_CAMERA3 + remote-endpoint = <&rdacm20_out3>; +#endif + }; + }; + + port@4 { + reg = <4>; + max9286_out0: endpoint { + clock-lanes = <0>; + data-lanes = <1 2 3 4>; + remote-endpoint = <&csi40_in>; + }; + }; + }; + + i2c-mux { + #address-cells = <1>; + #size-cells = <0>; + + i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + +#ifdef MAXIM_CAMERA0 + camera@31 { + compatible = MAXIM_CAMERA0; + reg = <0x31>, <0x41>, <0x51>; + + port { + rdacm20_out0: endpoint { + remote-endpoint = <&max9286_in0>; + }; + }; + + }; +#endif + }; + + i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + +#ifdef MAXIM_CAMERA1 + camera@32 { + compatible = MAXIM_CAMERA1; + reg = <0x32>, <0x42>, <0x52>; + port { + rdacm20_out1: endpoint { + remote-endpoint = <&max9286_in1>; + }; + }; + }; +#endif + }; + + i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + +#ifdef MAXIM_CAMERA2 + camera@33 { + compatible = MAXIM_CAMERA2; + reg = <0x33>, <0x43>, <0x53>; + port { + rdacm20_out2: endpoint { + remote-endpoint = <&max9286_in2>; + }; + }; + }; +#endif + }; + + i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + +#ifdef MAXIM_CAMERA3 + camera@34 { + compatible = MAXIM_CAMERA3; + reg = <0x34>, <0x44>, <0x54>; + port { + rdacm20_out3: endpoint { + remote-endpoint = <&max9286_in3>; + }; + }; + }; +#endif + }; + }; + }; + + gmsl-deserializer@6c { + compatible = "maxim,max9286"; + reg = <0x6c>; + poc-supply = <&poc_12v>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + max9286_in4: endpoint { +#ifdef MAXIM_CAMERA4 + remote-endpoint = <&rdacm20_out4>; +#endif + }; + }; + + port@1 { + reg = <1>; + max9286_in5: endpoint { +#ifdef MAXIM_CAMERA5 + remote-endpoint = <&rdacm20_out5>; +#endif + }; + }; + + port@2 { + reg = <2>; + max9286_in6: endpoint { +#ifdef MAXIM_CAMERA6 + remote-endpoint = <&rdacm20_out6>; +#endif + }; + }; + + port@3 { + reg = <3>; + max9286_in7: endpoint { +#ifdef MAXIM_CAMERA7 + remote-endpoint = <&rdacm20_out7>; +#endif + }; + }; + + port@4 { + reg = <4>; + max9286_out1: endpoint { + clock-lanes = <0>; + data-lanes = <1 2 3 4>; + remote-endpoint = <&csi41_in>; + }; + }; + }; + + i2c-mux { + #address-cells = <1>; + #size-cells = <0>; + + i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + +#ifdef MAXIM_CAMERA4 + camera@35 { + compatible = MAXIM_CAMERA4; + reg = <0x35>, <0x45>, <0x55>; + port { + rdacm20_out4: endpoint { + remote-endpoint = <&max9286_in4>; + }; + }; + }; +#endif + }; + + i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + +#ifdef MAXIM_CAMERA5 + camera@36 { + compatible = MAXIM_CAMERA5; + reg = <0x36>, <0x46>, <0x56>; + port { + rdacm20_out5: endpoint { + remote-endpoint = <&max9286_in5>; + }; + }; + }; +#endif + }; + + i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + +#ifdef MAXIM_CAMERA6 + camera@37 { + compatible = MAXIM_CAMERA6; + reg = <0x37>, <0x47>, <0x57>; + port { + rdacm20_out6: endpoint { + remote-endpoint = <&max9286_in6>; + }; + }; + }; +#endif + }; + + i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + +#ifdef MAXIM_CAMERA7 + camera@38 { + compatible = MAXIM_CAMERA7; + reg = <0x38>, <0x48>, <0x58>; + port { + rdacm20_out7: endpoint { + remote-endpoint = <&max9286_in7>; + }; + }; + }; +#endif + }; + }; + }; +}; From patchwork Fri Oct 16 12:06:25 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Jacopo Mondi X-Patchwork-Id: 11841191 Return-Path: Received: from mail.kernel.org (pdx-korg-mail-1.web.codeaurora.org [172.30.200.123]) by pdx-korg-patchwork-2.web.codeaurora.org (Postfix) with ESMTP id 2427614B5 for ; Fri, 16 Oct 2020 10:07:22 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by mail.kernel.org (Postfix) with ESMTP id 0C51B20872 for ; Fri, 16 Oct 2020 10:07:22 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S2406619AbgJPKHV (ORCPT ); Fri, 16 Oct 2020 06:07:21 -0400 Received: from relay4-d.mail.gandi.net ([217.70.183.196]:39871 "EHLO relay4-d.mail.gandi.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S2406585AbgJPKHM (ORCPT ); Fri, 16 Oct 2020 06:07:12 -0400 X-Originating-IP: 93.34.118.233 Received: from uno.lan (93-34-118-233.ip49.fastwebnet.it [93.34.118.233]) (Authenticated sender: jacopo@jmondi.org) by relay4-d.mail.gandi.net (Postfix) with ESMTPSA id 7FC12E0018; Fri, 16 Oct 2020 10:07:08 +0000 (UTC) From: Jacopo Mondi To: kieran.bingham+renesas@ideasonboard.com, laurent.pinchart+renesas@ideasonboard.com, niklas.soderlund+renesas@ragnatech.se Cc: Jacopo Mondi , linux-media@vger.kernel.org, linux-renesas-soc@vger.kernel.org, linux-kernel@vger.kernel.org, Hyun Kwon , Manivannan Sadhasivam Subject: [PATCH v3 7/7] [DNI] arm64: dts: renesas: salvator-x-max9286: Use high-threshold Date: Fri, 16 Oct 2020 14:06:25 +0200 Message-Id: <20201016120625.64337-8-jacopo+renesas@jmondi.org> X-Mailer: git-send-email 2.28.0 In-Reply-To: <20201016120625.64337-1-jacopo+renesas@jmondi.org> References: <20201016120625.64337-1-jacopo+renesas@jmondi.org> MIME-Version: 1.0 Precedence: bulk List-ID: X-Mailing-List: linux-media@vger.kernel.org Use the newly introduced 'maxim,high-threshold' property to maintain compatibility with RDACM20 camera module. Signed-off-by: Jacopo Mondi --- arch/arm64/boot/dts/renesas/salvator-x-max9286.dtsi | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/arm64/boot/dts/renesas/salvator-x-max9286.dtsi b/arch/arm64/boot/dts/renesas/salvator-x-max9286.dtsi index 6f4798859542..e207436f8690 100644 --- a/arch/arm64/boot/dts/renesas/salvator-x-max9286.dtsi +++ b/arch/arm64/boot/dts/renesas/salvator-x-max9286.dtsi @@ -128,6 +128,7 @@ gmsl-deserializer@4c { compatible = "maxim,max9286"; reg = <0x4c>; poc-supply = <&poc_12v>; + maxim,high-threshold; ports { #address-cells = <1>; @@ -263,6 +264,7 @@ gmsl-deserializer@6c { compatible = "maxim,max9286"; reg = <0x6c>; poc-supply = <&poc_12v>; + maxim,high-threshold; ports { #address-cells = <1>;