From patchwork Thu Mar 4 23:51:59 2021 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Doug Anderson X-Patchwork-Id: 12117141 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org X-Spam-Level: X-Spam-Status: No, score=-18.8 required=3.0 tests=BAYES_00,DKIMWL_WL_HIGH, DKIM_SIGNED,DKIM_VALID,DKIM_VALID_AU,HEADER_FROM_DIFFERENT_DOMAINS, INCLUDES_CR_TRAILER,INCLUDES_PATCH,MAILING_LIST_MULTI,SPF_HELO_NONE,SPF_PASS, URIBL_BLOCKED,USER_AGENT_GIT autolearn=ham autolearn_force=no version=3.4.0 Received: from mail.kernel.org (mail.kernel.org [198.145.29.99]) by smtp.lore.kernel.org (Postfix) with ESMTP id CB47CC433DB for ; Thu, 4 Mar 2021 23:53:13 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by mail.kernel.org (Postfix) with ESMTP id 9B05765000 for ; Thu, 4 Mar 2021 23:53:13 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S233406AbhCDXxM (ORCPT ); Thu, 4 Mar 2021 18:53:12 -0500 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:44122 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S233374AbhCDXxM (ORCPT ); Thu, 4 Mar 2021 18:53:12 -0500 Received: from mail-pg1-x52d.google.com (mail-pg1-x52d.google.com [IPv6:2607:f8b0:4864:20::52d]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 4371DC061574 for ; Thu, 4 Mar 2021 15:53:12 -0800 (PST) Received: by mail-pg1-x52d.google.com with SMTP id a23so66911pga.8 for ; Thu, 04 Mar 2021 15:53:12 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=chromium.org; s=google; h=from:to:cc:subject:date:message-id:mime-version :content-transfer-encoding; bh=Qnp/ZHTkSIkVYskvkrF513Ugb3dk9usGZrQyQUnFAEk=; b=Wgqw+87O9xoe5W14UsxraXU6NYwlrhsNsCGv+E1NklZkP4eYldm/NAWr8Ok9Xq3BER g8Y0zPvu/kMnEk1MY1x8XpDbNkzjleZeMkkwOlP1w9Rbj7/69N/r3SVOQC0Js0I6kCab CdiUXNPRZyk9gt0IpUp1JGWYqRVH1u09T5IjA= X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20161025; h=x-gm-message-state:from:to:cc:subject:date:message-id:mime-version :content-transfer-encoding; bh=Qnp/ZHTkSIkVYskvkrF513Ugb3dk9usGZrQyQUnFAEk=; b=FQbKipnmnKD36LKbeo46ifeS6hjZ2SAFTep4Rdcn99EYsmvMaTJfjlLdhgbRTTo39r jMn+uqS14VvSQWdFgq4430tW40hvfBUG4Hw3he3szc6qnvrLrrKsTe00GwMqDrUVYWYr WgmoHcUZGkAz9lUFMtQyWVcUM+0YVs8R82sVPxhl7LsUWQZU2cKzySC3Fm8UgoJ3zgML QgN8lA6gUhfKckRILO/BgGR949mvp3NMhWhMORwx3iNXlDiVn1Dm6yO0D8zylHU9GI/k X3XHOl+bbqnWGU3smSUXAyN2ttfV5eo3f/b4RFcvitdnksAaHPxBpYRpnuMhouligMSL nVlw== X-Gm-Message-State: AOAM530zGlyiBgBacPmEjg9um3T0Ln2bBZ4fArQohpdqi/vSFLm0QuiZ FQtbBllWyusQYOMeRWA1kN+Dew== X-Google-Smtp-Source: ABdhPJy4x/gHMFUZGwtp7tcOp3lrs2YSyiDqqo8LnNYjXNY5rgKoSevRVezwQxVGQyGEYR1olzYgTQ== X-Received: by 2002:aa7:9577:0:b029:1ee:ea22:5eeb with SMTP id x23-20020aa795770000b02901eeea225eebmr6177361pfq.33.1614901991316; Thu, 04 Mar 2021 15:53:11 -0800 (PST) Received: from tictac2.mtv.corp.google.com ([2620:15c:202:1:c4da:3a70:94aa:f337]) by smtp.gmail.com with ESMTPSA id r4sm319449pjl.15.2021.03.04.15.53.09 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Thu, 04 Mar 2021 15:53:10 -0800 (PST) From: Douglas Anderson To: Andrzej Hajda , Neil Armstrong , Laurent Pinchart , Jonas Karlman , Jernej Skrabec , Sam Ravnborg Cc: Stephen Boyd , linux-arm-msm@vger.kernel.org, robdclark@chromium.org, Douglas Anderson , Daniel Vetter , David Airlie , dri-devel@lists.freedesktop.org, linux-kernel@vger.kernel.org Subject: [PATCH 1/3] drm/bridge: ti-sn65dsi86: Simplify refclk handling Date: Thu, 4 Mar 2021 15:51:59 -0800 Message-Id: <20210304155144.1.Ic9c04f960190faad5290738b2a35d73661862735@changeid> X-Mailer: git-send-email 2.30.1.766.gb4fecdf3b7-goog MIME-Version: 1.0 Precedence: bulk List-ID: X-Mailing-List: linux-arm-msm@vger.kernel.org The clock framework makes it simple to deal with an optional clock. You can call clk_get_optional() and if the clock isn't specified it'll just return NULL without complaint. It's valid to pass NULL to enable/disable/prepare/unprepare. Let's make use of this to simplify things a tiny bit. NOTE: this makes things look a tad bit asymmetric now since we check for NULL before clk_prepare_enable() but not for clk_disable_unprepare(). This seemed OK to me. We already have to check for NULL in the enable case anyway so why not avoid the extra call? Signed-off-by: Douglas Anderson Reviewed-by: Robert Foss Reviewed-by: Bjorn Andersson Reviewed-by: Stephen Boyd Reviewed-by: Laurent Pinchart --- drivers/gpu/drm/bridge/ti-sn65dsi86.c | 11 +++-------- 1 file changed, 3 insertions(+), 8 deletions(-) diff --git a/drivers/gpu/drm/bridge/ti-sn65dsi86.c b/drivers/gpu/drm/bridge/ti-sn65dsi86.c index f27306c51e4d..942019842ff4 100644 --- a/drivers/gpu/drm/bridge/ti-sn65dsi86.c +++ b/drivers/gpu/drm/bridge/ti-sn65dsi86.c @@ -1261,14 +1261,9 @@ static int ti_sn_bridge_probe(struct i2c_client *client, return ret; } - pdata->refclk = devm_clk_get(pdata->dev, "refclk"); - if (IS_ERR(pdata->refclk)) { - ret = PTR_ERR(pdata->refclk); - if (ret == -EPROBE_DEFER) - return ret; - DRM_DEBUG_KMS("refclk not found\n"); - pdata->refclk = NULL; - } + pdata->refclk = devm_clk_get_optional(pdata->dev, "refclk"); + if (IS_ERR(pdata->refclk)) + return PTR_ERR(pdata->refclk); ret = ti_sn_bridge_parse_dsi_host(pdata); if (ret) From patchwork Thu Mar 4 23:52:00 2021 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Doug Anderson X-Patchwork-Id: 12117143 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org X-Spam-Level: X-Spam-Status: No, score=-18.8 required=3.0 tests=BAYES_00,DKIMWL_WL_HIGH, DKIM_SIGNED,DKIM_VALID,DKIM_VALID_AU,HEADER_FROM_DIFFERENT_DOMAINS, INCLUDES_CR_TRAILER,INCLUDES_PATCH,MAILING_LIST_MULTI,SPF_HELO_NONE,SPF_PASS, URIBL_BLOCKED,USER_AGENT_GIT autolearn=unavailable autolearn_force=no version=3.4.0 Received: from mail.kernel.org (mail.kernel.org [198.145.29.99]) by smtp.lore.kernel.org (Postfix) with ESMTP id ABE31C433E0 for ; Thu, 4 Mar 2021 23:53:17 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by mail.kernel.org (Postfix) with ESMTP id 7DF5B65005 for ; Thu, 4 Mar 2021 23:53:17 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S231197AbhCDXxQ (ORCPT ); Thu, 4 Mar 2021 18:53:16 -0500 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:44132 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S230175AbhCDXxO (ORCPT ); Thu, 4 Mar 2021 18:53:14 -0500 Received: from mail-pj1-x102d.google.com (mail-pj1-x102d.google.com [IPv6:2607:f8b0:4864:20::102d]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 006A0C061756 for ; Thu, 4 Mar 2021 15:53:13 -0800 (PST) Received: by mail-pj1-x102d.google.com with SMTP id l18so654258pji.3 for ; Thu, 04 Mar 2021 15:53:13 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=chromium.org; s=google; h=from:to:cc:subject:date:message-id:in-reply-to:references :mime-version:content-transfer-encoding; bh=S+h+F3vuabis5cicHM2Qzli6F7gn5nBS1+yxpb4YXQ8=; b=Ce9a++P61kOyTiiBWaKGm99NyEowe5VhEDxtPTdQ8kkSpVrxR3SkLppvh1qfm3MXLR IconjSYLsgrIpRScBAPMHvUf0E+VGsS3GO2IaEQJdpD8qR+Lu9fZd41BU3jwdlFMwNZk E7BZVrwp3IMWiKEx3b4dTfaJ+sI8fZ4el1l4g= X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20161025; h=x-gm-message-state:from:to:cc:subject:date:message-id:in-reply-to :references:mime-version:content-transfer-encoding; bh=S+h+F3vuabis5cicHM2Qzli6F7gn5nBS1+yxpb4YXQ8=; b=klssvBnPamAbPXwCxj0IpngLlIpUDQ/RIm8okOI3JLnhyo/vq40n5S1Mk/01cMlltQ vbALfEnNzvwJ344g9Hx9m9GKT8usmiwCB6qE/kjacTBK15Y9dBt5cZzXKJRQGUDH4JAD 7FWsBAT3ceiCHdjDqsWfs/pJm6jctJTgDtmv4KHuSTpY10kSKvLKB3CXvmVnZNg8D1bj 6Zo1YprVOthigXCy3dkEYZhbKnYuoa+tG3zXhZoWcLVKssl3Syf3t7nokEQLZSGnzlE1 IDJkJMhnWLL/KJTge0Du42lUYcjR2VaOiLamLuLJ4oWqvIwEqV5e/bpwrBqP8lJhEN8v 9CRQ== X-Gm-Message-State: AOAM5336kMHI7EiFc5an+nxUfXhg7NmF/0ae1ai+GzuumaROtrq62fOF QN1qLh5Ax7pdELnF9bwJStUfUg== X-Google-Smtp-Source: ABdhPJyMxk81tqITl4qzr90NzLrGeAPlqNXj46hbZvLSLRJWpwiUGKIi2jxnzDUjOGwBKAZQGzsQJw== X-Received: by 2002:a17:90a:7104:: with SMTP id h4mr6849219pjk.189.1614901993499; Thu, 04 Mar 2021 15:53:13 -0800 (PST) Received: from tictac2.mtv.corp.google.com ([2620:15c:202:1:c4da:3a70:94aa:f337]) by smtp.gmail.com with ESMTPSA id r4sm319449pjl.15.2021.03.04.15.53.11 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Thu, 04 Mar 2021 15:53:13 -0800 (PST) From: Douglas Anderson To: Andrzej Hajda , Neil Armstrong , Laurent Pinchart , Jonas Karlman , Jernej Skrabec , Sam Ravnborg Cc: Stephen Boyd , linux-arm-msm@vger.kernel.org, robdclark@chromium.org, Douglas Anderson , Daniel Vetter , David Airlie , dri-devel@lists.freedesktop.org, linux-kernel@vger.kernel.org Subject: [PATCH 2/3] drm/bridge: ti-sn65dsi86: Move code in prep for EDID read fix Date: Thu, 4 Mar 2021 15:52:00 -0800 Message-Id: <20210304155144.2.Id492ddb6e2cdd05eb94474b93654b04b270c9bbe@changeid> X-Mailer: git-send-email 2.30.1.766.gb4fecdf3b7-goog In-Reply-To: <20210304155144.1.Ic9c04f960190faad5290738b2a35d73661862735@changeid> References: <20210304155144.1.Ic9c04f960190faad5290738b2a35d73661862735@changeid> MIME-Version: 1.0 Precedence: bulk List-ID: X-Mailing-List: linux-arm-msm@vger.kernel.org This patch is _only_ code motion to prepare for the patch ("drm/bridge: ti-sn65dsi86: Properly get the EDID, but only if refclk") and make it easier to understand. Signed-off-by: Douglas Anderson Reviewed-by: Robert Foss Reviewed-by: Bjorn Andersson Reviewed-by: Stephen Boyd Reviewed-by: Laurent Pinchart --- drivers/gpu/drm/bridge/ti-sn65dsi86.c | 196 +++++++++++++------------- 1 file changed, 98 insertions(+), 98 deletions(-) diff --git a/drivers/gpu/drm/bridge/ti-sn65dsi86.c b/drivers/gpu/drm/bridge/ti-sn65dsi86.c index 942019842ff4..491c9c4f32d1 100644 --- a/drivers/gpu/drm/bridge/ti-sn65dsi86.c +++ b/drivers/gpu/drm/bridge/ti-sn65dsi86.c @@ -345,6 +345,104 @@ static int ti_sn_bridge_parse_regulators(struct ti_sn_bridge *pdata) pdata->supplies); } +static u32 ti_sn_bridge_get_dsi_freq(struct ti_sn_bridge *pdata) +{ + u32 bit_rate_khz, clk_freq_khz; + struct drm_display_mode *mode = + &pdata->bridge.encoder->crtc->state->adjusted_mode; + + bit_rate_khz = mode->clock * + mipi_dsi_pixel_format_to_bpp(pdata->dsi->format); + clk_freq_khz = bit_rate_khz / (pdata->dsi->lanes * 2); + + return clk_freq_khz; +} + +/* clk frequencies supported by bridge in Hz in case derived from REFCLK pin */ +static const u32 ti_sn_bridge_refclk_lut[] = { + 12000000, + 19200000, + 26000000, + 27000000, + 38400000, +}; + +/* clk frequencies supported by bridge in Hz in case derived from DACP/N pin */ +static const u32 ti_sn_bridge_dsiclk_lut[] = { + 468000000, + 384000000, + 416000000, + 486000000, + 460800000, +}; + +static void ti_sn_bridge_set_refclk_freq(struct ti_sn_bridge *pdata) +{ + int i; + u32 refclk_rate; + const u32 *refclk_lut; + size_t refclk_lut_size; + + if (pdata->refclk) { + refclk_rate = clk_get_rate(pdata->refclk); + refclk_lut = ti_sn_bridge_refclk_lut; + refclk_lut_size = ARRAY_SIZE(ti_sn_bridge_refclk_lut); + clk_prepare_enable(pdata->refclk); + } else { + refclk_rate = ti_sn_bridge_get_dsi_freq(pdata) * 1000; + refclk_lut = ti_sn_bridge_dsiclk_lut; + refclk_lut_size = ARRAY_SIZE(ti_sn_bridge_dsiclk_lut); + } + + /* for i equals to refclk_lut_size means default frequency */ + for (i = 0; i < refclk_lut_size; i++) + if (refclk_lut[i] == refclk_rate) + break; + + regmap_update_bits(pdata->regmap, SN_DPPLL_SRC_REG, REFCLK_FREQ_MASK, + REFCLK_FREQ(i)); +} + +static void ti_sn_bridge_post_disable(struct drm_bridge *bridge) +{ + struct ti_sn_bridge *pdata = bridge_to_ti_sn_bridge(bridge); + + clk_disable_unprepare(pdata->refclk); + + pm_runtime_put_sync(pdata->dev); +} + +static void ti_sn_bridge_pre_enable(struct drm_bridge *bridge) +{ + struct ti_sn_bridge *pdata = bridge_to_ti_sn_bridge(bridge); + + pm_runtime_get_sync(pdata->dev); + + /* configure bridge ref_clk */ + ti_sn_bridge_set_refclk_freq(pdata); + + /* + * HPD on this bridge chip is a bit useless. This is an eDP bridge + * so the HPD is an internal signal that's only there to signal that + * the panel is done powering up. ...but the bridge chip debounces + * this signal by between 100 ms and 400 ms (depending on process, + * voltage, and temperate--I measured it at about 200 ms). One + * particular panel asserted HPD 84 ms after it was powered on meaning + * that we saw HPD 284 ms after power on. ...but the same panel said + * that instead of looking at HPD you could just hardcode a delay of + * 200 ms. We'll assume that the panel driver will have the hardcoded + * delay in its prepare and always disable HPD. + * + * If HPD somehow makes sense on some future panel we'll have to + * change this to be conditional on someone specifying that HPD should + * be used. + */ + regmap_update_bits(pdata->regmap, SN_HPD_DISABLE_REG, HPD_DISABLE, + HPD_DISABLE); + + drm_panel_prepare(pdata->panel); +} + static int ti_sn_bridge_attach(struct drm_bridge *bridge, enum drm_bridge_attach_flags flags) { @@ -443,64 +541,6 @@ static void ti_sn_bridge_disable(struct drm_bridge *bridge) drm_panel_unprepare(pdata->panel); } -static u32 ti_sn_bridge_get_dsi_freq(struct ti_sn_bridge *pdata) -{ - u32 bit_rate_khz, clk_freq_khz; - struct drm_display_mode *mode = - &pdata->bridge.encoder->crtc->state->adjusted_mode; - - bit_rate_khz = mode->clock * - mipi_dsi_pixel_format_to_bpp(pdata->dsi->format); - clk_freq_khz = bit_rate_khz / (pdata->dsi->lanes * 2); - - return clk_freq_khz; -} - -/* clk frequencies supported by bridge in Hz in case derived from REFCLK pin */ -static const u32 ti_sn_bridge_refclk_lut[] = { - 12000000, - 19200000, - 26000000, - 27000000, - 38400000, -}; - -/* clk frequencies supported by bridge in Hz in case derived from DACP/N pin */ -static const u32 ti_sn_bridge_dsiclk_lut[] = { - 468000000, - 384000000, - 416000000, - 486000000, - 460800000, -}; - -static void ti_sn_bridge_set_refclk_freq(struct ti_sn_bridge *pdata) -{ - int i; - u32 refclk_rate; - const u32 *refclk_lut; - size_t refclk_lut_size; - - if (pdata->refclk) { - refclk_rate = clk_get_rate(pdata->refclk); - refclk_lut = ti_sn_bridge_refclk_lut; - refclk_lut_size = ARRAY_SIZE(ti_sn_bridge_refclk_lut); - clk_prepare_enable(pdata->refclk); - } else { - refclk_rate = ti_sn_bridge_get_dsi_freq(pdata) * 1000; - refclk_lut = ti_sn_bridge_dsiclk_lut; - refclk_lut_size = ARRAY_SIZE(ti_sn_bridge_dsiclk_lut); - } - - /* for i equals to refclk_lut_size means default frequency */ - for (i = 0; i < refclk_lut_size; i++) - if (refclk_lut[i] == refclk_rate) - break; - - regmap_update_bits(pdata->regmap, SN_DPPLL_SRC_REG, REFCLK_FREQ_MASK, - REFCLK_FREQ(i)); -} - static void ti_sn_bridge_set_dsi_rate(struct ti_sn_bridge *pdata) { unsigned int bit_rate_mhz, clk_freq_mhz; @@ -821,46 +861,6 @@ static void ti_sn_bridge_enable(struct drm_bridge *bridge) drm_panel_enable(pdata->panel); } -static void ti_sn_bridge_pre_enable(struct drm_bridge *bridge) -{ - struct ti_sn_bridge *pdata = bridge_to_ti_sn_bridge(bridge); - - pm_runtime_get_sync(pdata->dev); - - /* configure bridge ref_clk */ - ti_sn_bridge_set_refclk_freq(pdata); - - /* - * HPD on this bridge chip is a bit useless. This is an eDP bridge - * so the HPD is an internal signal that's only there to signal that - * the panel is done powering up. ...but the bridge chip debounces - * this signal by between 100 ms and 400 ms (depending on process, - * voltage, and temperate--I measured it at about 200 ms). One - * particular panel asserted HPD 84 ms after it was powered on meaning - * that we saw HPD 284 ms after power on. ...but the same panel said - * that instead of looking at HPD you could just hardcode a delay of - * 200 ms. We'll assume that the panel driver will have the hardcoded - * delay in its prepare and always disable HPD. - * - * If HPD somehow makes sense on some future panel we'll have to - * change this to be conditional on someone specifying that HPD should - * be used. - */ - regmap_update_bits(pdata->regmap, SN_HPD_DISABLE_REG, HPD_DISABLE, - HPD_DISABLE); - - drm_panel_prepare(pdata->panel); -} - -static void ti_sn_bridge_post_disable(struct drm_bridge *bridge) -{ - struct ti_sn_bridge *pdata = bridge_to_ti_sn_bridge(bridge); - - clk_disable_unprepare(pdata->refclk); - - pm_runtime_put_sync(pdata->dev); -} - static const struct drm_bridge_funcs ti_sn_bridge_funcs = { .attach = ti_sn_bridge_attach, .pre_enable = ti_sn_bridge_pre_enable, From patchwork Thu Mar 4 23:52:01 2021 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Doug Anderson X-Patchwork-Id: 12117145 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org X-Spam-Level: X-Spam-Status: No, score=-18.8 required=3.0 tests=BAYES_00,DKIMWL_WL_HIGH, DKIM_SIGNED,DKIM_VALID,DKIM_VALID_AU,HEADER_FROM_DIFFERENT_DOMAINS, INCLUDES_CR_TRAILER,INCLUDES_PATCH,MAILING_LIST_MULTI,SPF_HELO_NONE,SPF_PASS, URIBL_BLOCKED,USER_AGENT_GIT autolearn=ham autolearn_force=no version=3.4.0 Received: from mail.kernel.org (mail.kernel.org [198.145.29.99]) by smtp.lore.kernel.org (Postfix) with ESMTP id CCB6BC433E6 for ; Thu, 4 Mar 2021 23:53:17 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by mail.kernel.org (Postfix) with ESMTP id A196F65000 for ; Thu, 4 Mar 2021 23:53:17 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S230175AbhCDXxQ (ORCPT ); Thu, 4 Mar 2021 18:53:16 -0500 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:44142 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S233413AbhCDXxQ (ORCPT ); Thu, 4 Mar 2021 18:53:16 -0500 Received: from mail-pl1-x62e.google.com (mail-pl1-x62e.google.com [IPv6:2607:f8b0:4864:20::62e]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id A96D6C061574 for ; Thu, 4 Mar 2021 15:53:15 -0800 (PST) Received: by mail-pl1-x62e.google.com with SMTP id z7so352448plk.7 for ; Thu, 04 Mar 2021 15:53:15 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=chromium.org; s=google; h=from:to:cc:subject:date:message-id:in-reply-to:references :mime-version:content-transfer-encoding; bh=UBkcnjSJ+khnFevV5/EU+jVsWROYa6jawQFKSv/QOjA=; b=bs6/iOOfRH3uu3bejj01aYdHK4MlkeaFzxS8+2WErWFJ4JKdZuSxCt2JVWHrmh3Gyz CDVRbbgZ+ZHo+geW7h13AG7RU7iXwV2yGjmEu1szu9vJijWWVeyf9ilsSAYNy39mVwcR Xy2xfczE0Zi7SY5zEliOSZ3tIJzVm6iA0S8R8= X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20161025; h=x-gm-message-state:from:to:cc:subject:date:message-id:in-reply-to :references:mime-version:content-transfer-encoding; bh=UBkcnjSJ+khnFevV5/EU+jVsWROYa6jawQFKSv/QOjA=; b=c+IaT+YRhfBTOHB1qDHhWEjIbNPkO3HYdFhknnJagYrgS9M5nfY5bE0VL6McFsXfmw A9DoqOEro6+A+tu0Lo03IKau44c5CQ9787fzZjlaFFE+G9u7W2nGNKphTM+BKMtbEgbP MBaZtrensW8kzY4QftLmeSuDrgb0PgX67drU7/5cYsH6+A4oa8C6hlnvdZHRcKdJroX7 ANn4XvwzKrGz8EpchxmvU0Tq4igRRQchRa+7IBoJODuP7Td+CwHAdB6e/I2zkh8KOJ0C W8Fq/6kFQU9c8DwpI9Pd+3IFzjqrH6BtK5e0Qlz6N6FJOOzeE6hpbctXNayAXFwhAMEM ph1Q== X-Gm-Message-State: AOAM531NMEvV1mAKThqghVU+fsi7SQufcM0H7w7wWAfzv2HJ/AC2sP/M ci+X7DSXj9bKjsJUTjGYNih22xXYNxzC755+ X-Google-Smtp-Source: ABdhPJxFqppfaJEF9lXed5SZV/2p5ymov/y5/tX6icV4gFroYyZbkBcsPliInDUpwT2gZrhvByYN6A== X-Received: by 2002:a17:90a:a78a:: with SMTP id f10mr7265726pjq.101.1614901995169; Thu, 04 Mar 2021 15:53:15 -0800 (PST) Received: from tictac2.mtv.corp.google.com ([2620:15c:202:1:c4da:3a70:94aa:f337]) by smtp.gmail.com with ESMTPSA id r4sm319449pjl.15.2021.03.04.15.53.13 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Thu, 04 Mar 2021 15:53:14 -0800 (PST) From: Douglas Anderson To: Andrzej Hajda , Neil Armstrong , Laurent Pinchart , Jonas Karlman , Jernej Skrabec , Sam Ravnborg Cc: Stephen Boyd , linux-arm-msm@vger.kernel.org, robdclark@chromium.org, Douglas Anderson , Daniel Vetter , David Airlie , dri-devel@lists.freedesktop.org, linux-kernel@vger.kernel.org Subject: [PATCH 3/3] drm/bridge: ti-sn65dsi86: Properly get the EDID, but only if refclk Date: Thu, 4 Mar 2021 15:52:01 -0800 Message-Id: <20210304155144.3.I60a7fb23ce4589006bc95c64ab8d15c74b876e68@changeid> X-Mailer: git-send-email 2.30.1.766.gb4fecdf3b7-goog In-Reply-To: <20210304155144.1.Ic9c04f960190faad5290738b2a35d73661862735@changeid> References: <20210304155144.1.Ic9c04f960190faad5290738b2a35d73661862735@changeid> MIME-Version: 1.0 Precedence: bulk List-ID: X-Mailing-List: linux-arm-msm@vger.kernel.org In commit 58074b08c04a ("drm/bridge: ti-sn65dsi86: Read EDID blob over DDC") we attempted to make the ti-sn65dsi86 bridge properly read the EDID from the panel. That commit kinda worked but it had some serious problems. The problems all stem from the fact that userspace wants to be able to read the EDID before it explicitly enables the panel. For eDP panels, though, we don't actually power the panel up until the pre-enable stage and the pre-enable call happens right before the enable call with no way to interject in-between. For eDP panels, you can't read the EDID until you power the panel. The result was that ti_sn_bridge_connector_get_modes() was always failing to read the EDID (falling back to what drm_panel_get_modes() returned) until _after_ the EDID was needed. To make it concrete, on my system I saw this happen: 1. We'd attach the bridge. 2. Userspace would ask for the EDID (several times). We'd try but fail to read the EDID over and over again and fall back to the hardcoded modes. 3. Userspace would decide on a mode based only on the hardcoded modes. 4. Userspace would ask to turn the panel on. 5. Userspace would (eventually) check the modes again (in Chrome OS this happens on the handoff from the boot splash screen to the browser). Now we'd read them properly and, if they were different, userspace would request to change the mode. The fact that userspace would always end up using the hardcoded modes at first significantly decreases the benefit of the EDID reading. Also: if the modes were even a tiny bit different we'd end up doing a wasteful modeset and at boot. As a side note: at least early EDID read failures were relatively fast. Though the old ti_sn_bridge_connector_get_modes() did call pm_runtime_get_sync() it didn't program the important "HPD_DISABLE" bit. That meant that all the AUX transfers failed pretty quickly. In any case, enough about the problem. How are we fixing it? Obviously we need to power the panel on _before_ reading the EDID, but how? It turns out that there's really no problem with just doing all the work of our pre_enable() function right at attach time and reading the EDID right away. We'll do that. It's not as easy as it sounds, though, because: 1. Powering the panel up and down is a pretty expensive operation. Not only do we need to wait for the HPD line which seems to take up to 200 ms on most panels, but also most panels say that once you power them off you need to wait at least 500 ms before powering them on again. We really don't want to incur 700 ms of time here. 2. If we happen not to have a fixed "refclk" we've got a chicken-and-egg problem. We seem to need the clock setup to read the EDID. Without a fixed "refclk", though, the bridge runs with the MIPI pixel clock which means you've got to use a hardcoded mode for the MIPI pixel clock. We'll solve problem #1 above by leaving the panel powered on for a little while after we read the EDID. If enough time passes and nobody turns the panel on then we'll undo our work. NOTE: there are no functional problems if someone turns the panel on after a long delay, it just might take a little longer to turn on. We'll solve problem #2 by simply _always_ using a hardcoded mode (not reading the EDID) if a "refclk" wasn't provided. While it might be possible to fudge something together to support this, it's my belief that nobody is using this mode in real life since it's really inflexible. I saw it used for some really early prototype hardware that was thrown in the e-waste bin years ago when we realized how inflexible it was. In any case, if someone is using this they're in no worse shape than they were before the (fairly recent) commit 58074b08c04a ("drm/bridge: ti-sn65dsi86: Read EDID blob over DDC"). NOTE: while this patch feels a bit hackish, I'm not sure there's much we can do better without a more fundamental DRM API change. After looking at it a bunch, it also doesn't feel as hacky to me as I first thought. The things that pre-enable does are well defined and well understood and there should be no problems with doing them early nor with doing them before userspace requests anything. Fixes: 58074b08c04a ("drm/bridge: ti-sn65dsi86: Read EDID blob over DDC") Signed-off-by: Douglas Anderson Reviewed-by: Bjorn Andersson --- drivers/gpu/drm/bridge/ti-sn65dsi86.c | 98 ++++++++++++++++++++++++--- 1 file changed, 88 insertions(+), 10 deletions(-) diff --git a/drivers/gpu/drm/bridge/ti-sn65dsi86.c b/drivers/gpu/drm/bridge/ti-sn65dsi86.c index 491c9c4f32d1..af3fb4657af6 100644 --- a/drivers/gpu/drm/bridge/ti-sn65dsi86.c +++ b/drivers/gpu/drm/bridge/ti-sn65dsi86.c @@ -16,6 +16,7 @@ #include #include #include +#include #include @@ -130,6 +131,12 @@ * @ln_assign: Value to program to the LN_ASSIGN register. * @ln_polrs: Value for the 4-bit LN_POLRS field of SN_ENH_FRAME_REG. * + * @pre_enabled_early: If true we did an early pre_enable at attach. + * @pre_enable_timeout_work: Delayed work to undo the pre_enable from attach + * if a normal pre_enable never came. + * @pre_enable_mutex: Lock to synchronize between the pre_enable_timeout_work + * and normal mechanisms. + * * @gchip: If we expose our GPIOs, this is used. * @gchip_output: A cache of whether we've set GPIOs to output. This * serves double-duty of keeping track of the direction and @@ -158,6 +165,10 @@ struct ti_sn_bridge { u8 ln_assign; u8 ln_polrs; + bool pre_enabled_early; + struct delayed_work pre_enable_timeout_work; + struct mutex pre_enable_mutex; + #if defined(CONFIG_OF_GPIO) struct gpio_chip gchip; DECLARE_BITMAP(gchip_output, SN_NUM_GPIOS); @@ -272,12 +283,6 @@ static int ti_sn_bridge_connector_get_modes(struct drm_connector *connector) struct edid *edid = pdata->edid; int num, ret; - if (!edid) { - pm_runtime_get_sync(pdata->dev); - edid = pdata->edid = drm_get_edid(connector, &pdata->aux.ddc); - pm_runtime_put(pdata->dev); - } - if (edid && drm_edid_is_valid(edid)) { ret = drm_connector_update_edid_property(connector, edid); if (!ret) { @@ -412,10 +417,8 @@ static void ti_sn_bridge_post_disable(struct drm_bridge *bridge) pm_runtime_put_sync(pdata->dev); } -static void ti_sn_bridge_pre_enable(struct drm_bridge *bridge) +static void __ti_sn_bridge_pre_enable(struct ti_sn_bridge *pdata) { - struct ti_sn_bridge *pdata = bridge_to_ti_sn_bridge(bridge); - pm_runtime_get_sync(pdata->dev); /* configure bridge ref_clk */ @@ -443,6 +446,38 @@ static void ti_sn_bridge_pre_enable(struct drm_bridge *bridge) drm_panel_prepare(pdata->panel); } +static void ti_sn_bridge_pre_enable(struct drm_bridge *bridge) +{ + struct ti_sn_bridge *pdata = bridge_to_ti_sn_bridge(bridge); + + mutex_lock(&pdata->pre_enable_mutex); + if (pdata->pre_enabled_early) + /* Already done! Just mark that normal pre_enable happened */ + pdata->pre_enabled_early = false; + else + __ti_sn_bridge_pre_enable(pdata); + mutex_unlock(&pdata->pre_enable_mutex); +} + +static void ti_sn_bridge_cancel_early_pre_enable(struct ti_sn_bridge *pdata) +{ + mutex_lock(&pdata->pre_enable_mutex); + if (pdata->pre_enabled_early) { + pdata->pre_enabled_early = false; + ti_sn_bridge_post_disable(&pdata->bridge); + } + mutex_unlock(&pdata->pre_enable_mutex); +} + +static void ti_sn_bridge_pre_enable_timeout(struct work_struct *work) +{ + struct delayed_work *dwork = to_delayed_work(work); + struct ti_sn_bridge *pdata = container_of(dwork, struct ti_sn_bridge, + pre_enable_timeout_work); + + ti_sn_bridge_cancel_early_pre_enable(pdata); +} + static int ti_sn_bridge_attach(struct drm_bridge *bridge, enum drm_bridge_attach_flags flags) { @@ -516,6 +551,34 @@ static int ti_sn_bridge_attach(struct drm_bridge *bridge, } pdata->dsi = dsi; + /* + * If we have a refclk then we can support dynamic EDID. + * + * A few notes: + * - From trial and error it appears that we need our clock setup in + * order to read the EDID. If we don't have refclk then we + * (presumably) need the MIPI clock on, but turning that on implies + * knowing the pixel clock / not needing the EDID. Maybe we could + * futz this if necessary, but for now we won't. + * - In order to read the EDID we need power on to the bridge and + * the panel (and it has to finish booting up / assert HPD). This + * is slow so we leave the panel powered when we're done but setup a + * timeout so we don't leave it on forever. + * - The rest of Linux assumes that it can read the EDID without + * (explicitly) enabling the power which is why this somewhat awkward + * step is needed. + */ + if (pdata->refclk) { + mutex_lock(&pdata->pre_enable_mutex); + + pdata->pre_enabled_early = true; + __ti_sn_bridge_pre_enable(pdata); + pdata->edid = drm_get_edid(&pdata->connector, &pdata->aux.ddc); + schedule_delayed_work(&pdata->pre_enable_timeout_work, 30 * HZ); + + mutex_unlock(&pdata->pre_enable_mutex); + } + return 0; err_dsi_attach: @@ -525,6 +588,17 @@ static int ti_sn_bridge_attach(struct drm_bridge *bridge, return ret; } +static void ti_sn_bridge_detach(struct drm_bridge *bridge) +{ + struct ti_sn_bridge *pdata = bridge_to_ti_sn_bridge(bridge); + + cancel_delayed_work_sync(&pdata->pre_enable_timeout_work); + ti_sn_bridge_cancel_early_pre_enable(pdata); + + kfree(pdata->edid); + pdata->edid = NULL; +} + static void ti_sn_bridge_disable(struct drm_bridge *bridge) { struct ti_sn_bridge *pdata = bridge_to_ti_sn_bridge(bridge); @@ -863,6 +937,7 @@ static void ti_sn_bridge_enable(struct drm_bridge *bridge) static const struct drm_bridge_funcs ti_sn_bridge_funcs = { .attach = ti_sn_bridge_attach, + .detach = ti_sn_bridge_detach, .pre_enable = ti_sn_bridge_pre_enable, .enable = ti_sn_bridge_enable, .disable = ti_sn_bridge_disable, @@ -1227,6 +1302,10 @@ static int ti_sn_bridge_probe(struct i2c_client *client, if (!pdata) return -ENOMEM; + mutex_init(&pdata->pre_enable_mutex); + INIT_DELAYED_WORK(&pdata->pre_enable_timeout_work, + ti_sn_bridge_pre_enable_timeout); + pdata->regmap = devm_regmap_init_i2c(client, &ti_sn_bridge_regmap_config); if (IS_ERR(pdata->regmap)) { @@ -1301,7 +1380,6 @@ static int ti_sn_bridge_remove(struct i2c_client *client) if (!pdata) return -EINVAL; - kfree(pdata->edid); ti_sn_debugfs_remove(pdata); of_node_put(pdata->host_node);