From patchwork Fri Mar 5 21:35:54 2021 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Caleb Connolly X-Patchwork-Id: 12119501 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org X-Spam-Level: X-Spam-Status: No, score=-20.8 required=3.0 tests=BAYES_00,DKIM_SIGNED, DKIM_VALID,DKIM_VALID_AU,HEADER_FROM_DIFFERENT_DOMAINS,INCLUDES_CR_TRAILER, INCLUDES_PATCH,MAILING_LIST_MULTI,MENTIONS_GIT_HOSTING,SPF_HELO_NONE,SPF_PASS, URIBL_BLOCKED autolearn=unavailable autolearn_force=no version=3.4.0 Received: from mail.kernel.org (mail.kernel.org [198.145.29.99]) by smtp.lore.kernel.org (Postfix) with ESMTP id 955A7C433E6 for ; Fri, 5 Mar 2021 21:36:54 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by mail.kernel.org (Postfix) with ESMTP id 69AD2650A9 for ; Fri, 5 Mar 2021 21:36:54 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S229711AbhCEVgV (ORCPT ); Fri, 5 Mar 2021 16:36:21 -0500 Received: from mail2.protonmail.ch ([185.70.40.22]:25500 "EHLO mail2.protonmail.ch" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S229716AbhCEVf7 (ORCPT ); Fri, 5 Mar 2021 16:35:59 -0500 Date: Fri, 05 Mar 2021 21:35:54 +0000 DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=connolly.tech; s=protonmail; t=1614980157; bh=+SBABWBIKMDYORQcBuRJh6o5xp6e6HWvH10j5/ENmDM=; h=Date:To:From:Cc:Reply-To:Subject:From; b=l0UVX1iMI/WlG8Na0l5QVu+LBb6zN+9s1q1CQtAIDST5gWwm62/3FPIUPDJIqWi6C TOPjEe3lxUDZiezK9KpOQ9hZ+qFn3pulqxNjrTvzC7EtJ7Xs1vOIC3Pb1uAbdhHob2 WCsMXujISnOY/mdSE0pMhzWOPBuaBCNKPIa3iua8= To: caleb@connolly.tech, Andy Gross , Bjorn Andersson , Rob Herring , Kees Cook , Anton Vorontsov , Colin Cross , Tony Luck From: Caleb Connolly Cc: ~postmarketos/upstreaming@lists.sr.ht, phone-devel@vger.kernel.org, linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org Reply-To: Caleb Connolly Subject: [PATCH] arm64: dts: add support for the Pixel 2 XL Message-ID: <20210305213235.398252-1-caleb@connolly.tech> MIME-Version: 1.0 Precedence: bulk List-ID: X-Mailing-List: linux-arm-msm@vger.kernel.org Add a minimal devicetree capable of booting on the Pixel 2 XL MSM8998 device. It's currently possible to boot the device into postmarketOS with USB networking, however the display panel depends on Display Stream Compression which is not yet supported in the kernel. The bootloader also requires that the dtbo partition contains a device tree overlay with a particular id which has to be overlayed onto the existing dtb. It's possible to use a specially crafted dtbo partition to workaround this, more information is available here: https://gitlab.com/calebccff/dtbo-google-wahoo-mainline Signed-off-by: Caleb Connolly --- It's possible to get wifi working by running Bjorns diag-router in the background, without this the wifi firmware crashes every 10 seconds or so. This is the same issue encountered on the OnePlus 5. arch/arm64/boot/dts/qcom/Makefile | 1 + .../boot/dts/qcom/msm8998-google-taimen.dts | 14 + .../boot/dts/qcom/msm8998-google-wahoo.dtsi | 391 ++++++++++++++++++ 3 files changed, 406 insertions(+) create mode 100644 arch/arm64/boot/dts/qcom/msm8998-google-taimen.dts create mode 100644 arch/arm64/boot/dts/qcom/msm8998-google-wahoo.dtsi diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile index 5113fac80b7a..d942d3ec3928 100644 --- a/arch/arm64/boot/dts/qcom/Makefile +++ b/arch/arm64/boot/dts/qcom/Makefile @@ -16,6 +16,7 @@ dtb-$(CONFIG_ARCH_QCOM) += msm8994-msft-lumia-cityman.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8994-sony-xperia-kitakami-sumire.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8996-mtp.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8998-asus-novago-tp370ql.dtb +dtb-$(CONFIG_ARCH_QCOM) += msm8998-google-taimen.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8998-hp-envy-x2.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8998-lenovo-miix-630.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8998-mtp.dtb diff --git a/arch/arm64/boot/dts/qcom/msm8998-google-taimen.dts b/arch/arm64/boot/dts/qcom/msm8998-google-taimen.dts new file mode 100644 index 000000000000..ffaaafe14037 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8998-google-taimen.dts @@ -0,0 +1,14 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (c) 2020, Caleb Connolly + */ + +/dts-v1/; + +#include "msm8998-google-wahoo.dtsi" + +/ { + model = "Google Pixel 2 XL"; + compatible = "google,taimen", "google,wahoo", "qcom,msm8998", "qcom,msm8998-mtp"; + qcom,msm-id = <0x124 0x20001>; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8998-google-wahoo.dtsi b/arch/arm64/boot/dts/qcom/msm8998-google-wahoo.dtsi new file mode 100644 index 000000000000..0c221ead2df7 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8998-google-wahoo.dtsi @@ -0,0 +1,391 @@ +// SPDX-License-Identifier: GPL-2.0 +/* Copyright (c) 2020 Caleb Connolly */ + +#include "msm8998.dtsi" +#include "pm8998.dtsi" +#include "pmi8998.dtsi" +#include "pm8005.dtsi" + +/delete-node/ &mpss_mem; +/delete-node/ &venus_mem; +/delete-node/ &mba_mem; +/delete-node/ &slpi_mem; + +/ { + aliases { + }; + + chosen { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + /* Add "earlycon" intended to be used in combination with UART serial console */ + bootargs = "clk_ignore_unused earlycon console=ttyGS0,115200";// loglevel=10 drm.debug=15 debug"; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + mpss_mem: memory@8cc00000 { + reg = <0 0x8cc00000 0 0x7800000>; + no-map; + }; + + venus_mem: memory@94400000 { + reg = <0 0x94400000 0 0x500000>; + no-map; + }; + + mba_mem: memory@94100000 { + reg = <0 0x94900000 0 0x200000>; + no-map; + }; + + slpi_mem: memory@94b00000 { + reg = <0 0x94b00000 0 0x700000>; + no-map; + }; + + ramoops: ramoops@a1810000 { + compatible = "ramoops"; + reg = <0 0xa1810000 0 0x200000>; + record-size = <0x20000>; + console-size = <0x100000>; + pmsg-size = <0x80000>; + }; + }; + + vph_pwr: vph-pwr-regulator { + compatible = "regulator-fixed"; + regulator-name = "vph_pwr"; + regulator-always-on; + regulator-boot-on; + }; +}; + +&blsp1_uart3 { + status = "disabled"; + + bluetooth { + compatible = "qcom,wcn3990-bt"; + + vddio-supply = <&vreg_s4a_1p8>; + vddxo-supply = <&vreg_l7a_1p8>; + vddrf-supply = <&vreg_l17a_1p3>; + vddch0-supply = <&vreg_l25a_3p3>; + max-speed = <3200000>; + }; +}; + +&pcie0 { + status = "disabled"; +}; + +&pm8005_lsid1 { + pm8005-regulators { + compatible = "qcom,pm8005-regulators"; + + vdd_s1-supply = <&vph_pwr>; + + pm8005_s1: s1 { /* VDD_GFX supply */ + regulator-min-microvolt = <524000>; + regulator-max-microvolt = <1100000>; + regulator-enable-ramp-delay = <500>; + + /* hack until we rig up the gpu consumer */ + regulator-always-on; + }; + }; +}; + +&qusb2phy { + status = "okay"; + + vdda-pll-supply = <&vreg_l12a_1p8>; + vdda-phy-dpdm-supply = <&vreg_l24a_3p075>; +}; + +&remoteproc_adsp { + status = "okay"; + + firmware-name = "qcom/pixel2/adsp.mdt"; +}; + +&remoteproc_mss { + firmware-name = "qcom/pixel2/mba.mbn", + "qcom/pixel2/modem.mdt"; +}; + +&remoteproc_slpi { + status = "okay"; + + firmware-name = "qcom/pixel2/slpi_v2.mdt"; +}; + +&rpm_requests { + pm8998-regulators { + compatible = "qcom,rpm-pm8998-regulators"; + + vdd_s1-supply = <&vph_pwr>; + vdd_s2-supply = <&vph_pwr>; + vdd_s3-supply = <&vph_pwr>; + vdd_s4-supply = <&vph_pwr>; + vdd_s5-supply = <&vph_pwr>; + vdd_s6-supply = <&vph_pwr>; + vdd_s7-supply = <&vph_pwr>; + vdd_s8-supply = <&vph_pwr>; + vdd_s9-supply = <&vph_pwr>; + vdd_s10-supply = <&vph_pwr>; + vdd_s11-supply = <&vph_pwr>; + vdd_s12-supply = <&vph_pwr>; + vdd_s13-supply = <&vph_pwr>; + vdd_l1_l27-supply = <&vreg_s7a_1p025>; + vdd_l2_l8_l17-supply = <&vreg_s3a_1p35>; + vdd_l3_l11-supply = <&vreg_s7a_1p025>; + vdd_l4_l5-supply = <&vreg_s7a_1p025>; + vdd_l6-supply = <&vreg_s5a_2p04>; + vdd_l7_l12_l14_l15-supply = <&vreg_s5a_2p04>; + vdd_l9-supply = <&vreg_bob>; + vdd_l10_l23_l25-supply = <&vreg_bob>; + vdd_l13_l19_l21-supply = <&vreg_bob>; + vdd_l16_l28-supply = <&vreg_bob>; + vdd_l18_l22-supply = <&vreg_bob>; + vdd_l20_l24-supply = <&vreg_bob>; + vdd_l26-supply = <&vreg_s3a_1p35>; + vdd_lvs1_lvs2-supply = <&vreg_s4a_1p8>; + + vreg_s3a_1p35: s3 { + regulator-min-microvolt = <1352000>; + regulator-max-microvolt = <1352000>; + }; + vreg_s4a_1p8: s4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-allow-set-load; + }; + vreg_s5a_2p04: s5 { + regulator-min-microvolt = <1904000>; + regulator-max-microvolt = <2040000>; + }; + vreg_s7a_1p025: s7 { + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1028000>; + }; + vreg_l1a_0p875: l1 { + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <880000>; + }; + vreg_l2a_1p2: l2 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + vreg_l3a_1p0: l3 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + }; + vreg_l5a_0p8: l5 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <800000>; + }; + vreg_l6a_1p8: l6 { + regulator-min-microvolt = <1808000>; + regulator-max-microvolt = <1808000>; + }; + vreg_l7a_1p8: l7 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + vreg_l8a_1p2: l8 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + vreg_l9a_1p8: l9 { + regulator-min-microvolt = <1808000>; + regulator-max-microvolt = <2960000>; + }; + vreg_l10a_1p8: l10 { + regulator-min-microvolt = <1808000>; + regulator-max-microvolt = <2960000>; + }; + vreg_l11a_1p0: l11 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + }; + vreg_l12a_1p8: l12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + vreg_l13a_2p95: l13 { + regulator-min-microvolt = <1808000>; + regulator-max-microvolt = <2960000>; + }; + vreg_l14a_1p88: l14 { + regulator-min-microvolt = <1880000>; + regulator-max-microvolt = <1880000>; + }; + vreg_15a_1p8: l15 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + vreg_l16a_2p7: l16 { + regulator-min-microvolt = <2704000>; + regulator-max-microvolt = <2704000>; + }; + vreg_l17a_1p3: l17 { + regulator-min-microvolt = <1304000>; + regulator-max-microvolt = <1304000>; + }; + vreg_l18a_2p7: l18 { + regulator-min-microvolt = <2704000>; + regulator-max-microvolt = <2704000>; + }; + vreg_l19a_3p0: l19 { + regulator-min-microvolt = <3008000>; + regulator-max-microvolt = <3008000>; + }; + vreg_l20a_2p95: l20 { + regulator-min-microvolt = <2960000>; + regulator-max-microvolt = <2960000>; + regulator-allow-set-load; + }; + vreg_l21a_2p95: l21 { + regulator-min-microvolt = <2960000>; + regulator-max-microvolt = <2960000>; + regulator-allow-set-load; + regulator-system-load = <800000>; + }; + vreg_l22a_2p85: l22 { + regulator-min-microvolt = <2864000>; + regulator-max-microvolt = <2864000>; + }; + vreg_l23a_3p3: l23 { + regulator-min-microvolt = <3312000>; + regulator-max-microvolt = <3312000>; + }; + vreg_l24a_3p075: l24 { + regulator-min-microvolt = <3088000>; + regulator-max-microvolt = <3088000>; + }; + vreg_l25a_3p3: l25 { + regulator-min-microvolt = <3104000>; + regulator-max-microvolt = <3312000>; + }; + vreg_l26a_1p2: l26 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-allow-set-load; + }; + vreg_l28_3p0: l28 { + regulator-min-microvolt = <3008000>; + regulator-max-microvolt = <3008000>; + }; + + vreg_lvs1a_1p8: lvs1 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + vreg_lvs2a_1p8: lvs2 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + }; + + pmi8998-regulators { + compatible = "qcom,rpm-pmi8998-regulators"; + + vdd_bob-supply = <&vph_pwr>; + + vreg_bob: bob { + regulator-min-microvolt = <3312000>; + regulator-max-microvolt = <3600000>; + }; + }; +}; + +&spmi_bus { + pmic@0 { + compatible = "qcom,pm8994", "qcom,spmi-pmic"; + reg = <0x0 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + pon@800 { + compatible = "qcom,pm8916-pon"; + + reg = <0x800>; + mode-bootloader = <0x2>; + mode-recovery = <0x1>; + + pwrkey { + compatible = "qcom,pm8941-pwrkey"; + interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>; + debounce = <15625>; + bias-pull-up; + linux,code = ; + }; + }; + }; +}; + +&tlmm { + gpio-reserved-ranges = <0 4>, <81 4>; +}; + +/* + * The device does contain a USB3 capable type-c port, + * however it doesn't seem to work when superspeed mode is + * enabled. + */ +&usb3 { + status = "okay"; + + /* Operate "GCC_USB30_MASTER_CLK" in HS mode (>=60 MHz) */ + assigned-clock-rates = <19200000>, <60000000>; + + /* Disable USB3 pipe_clk requirement */ + qcom,select-utmi-as-pipe-clk; +}; + +&usb3_dwc3 { + /* Drop USB 3 SuperSpeed PHY to bring up the "usb0" interface */ + phys = <&qusb2phy>; + phy-names = "usb2-phy"; + + /* We can only operate at USB 2.0 speeds */ + maximum-speed = "high-speed"; + + /* Force to peripheral until we have Type-C hooked up */ + dr_mode = "peripheral"; +}; + +&ufshc { + vcc-supply = <&vreg_l20a_2p95>; + vccq-supply = <&vreg_l26a_1p2>; + vccq2-supply = <&vreg_s4a_1p8>; + vcc-max-microamp = <750000>; + vccq-max-microamp = <560000>; + vccq2-max-microamp = <750000>; +}; + +&ufsphy { + vdda-phy-supply = <&vreg_l1a_0p875>; + vdda-pll-supply = <&vreg_l2a_1p2>; + vddp-ref-clk-supply = <&vreg_l26a_1p2>; + vdda-phy-max-microamp = <51400>; + vdda-pll-max-microamp = <14600>; + vddp-ref-clk-max-microamp = <100>; + vddp-ref-clk-always-on; +}; + +&wifi { + status = "okay"; + + vdd-0.8-cx-mx-supply = <&vreg_l5a_0p8>; + vdd-1.8-xo-supply = <&vreg_l7a_1p8>; + vdd-1.3-rfa-supply = <&vreg_l17a_1p3>; + vdd-3.3-ch0-supply = <&vreg_l25a_3p3>; +};