From patchwork Tue Jun 8 15:27:34 2021 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Konrad Dybcio X-Patchwork-Id: 12307209 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org X-Spam-Level: X-Spam-Status: No, score=-16.8 required=3.0 tests=BAYES_00, HEADER_FROM_DIFFERENT_DOMAINS,INCLUDES_CR_TRAILER,INCLUDES_PATCH, MAILING_LIST_MULTI,SPF_HELO_NONE,SPF_PASS,URIBL_BLOCKED,USER_AGENT_GIT autolearn=unavailable autolearn_force=no version=3.4.0 Received: from mail.kernel.org (mail.kernel.org [198.145.29.99]) by smtp.lore.kernel.org (Postfix) with ESMTP id BF66AC47082 for ; Tue, 8 Jun 2021 15:27:44 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by mail.kernel.org (Postfix) with ESMTP id A4D3561351 for ; Tue, 8 Jun 2021 15:27:44 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S231243AbhFHP3g (ORCPT ); Tue, 8 Jun 2021 11:29:36 -0400 Received: from relay02.th.seeweb.it ([5.144.164.163]:36373 "EHLO relay02.th.seeweb.it" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S231192AbhFHP3g (ORCPT ); Tue, 8 Jun 2021 11:29:36 -0400 Received: from localhost.localdomain (83.6.168.161.neoplus.adsl.tpnet.pl [83.6.168.161]) by m-r1.th.seeweb.it (Postfix) with ESMTPA id E350A1FAFE; Tue, 8 Jun 2021 17:27:40 +0200 (CEST) From: Konrad Dybcio To: ~postmarketos/upstreaming@lists.sr.ht Cc: martin.botka@somainline.org, angelogioacchino.delregno@somainline.org, marijn.suijten@somainline.org, jamipkettunen@somainline.org, Konrad Dybcio , Andy Gross , Bjorn Andersson , Rob Herring , linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org Subject: [PATCH v3 1/3] arm64: dts: qcom: Add PMI8996 DTSI file Date: Tue, 8 Jun 2021 17:27:34 +0200 Message-Id: <20210608152737.154218-1-konrad.dybcio@somainline.org> X-Mailer: git-send-email 2.31.1 MIME-Version: 1.0 Precedence: bulk List-ID: X-Mailing-List: linux-arm-msm@vger.kernel.org PMI8996 is *almost* the same hardware as PMI8994, say for some annoyances: - Boards equipped with PMI8996 now have to include pmic-id (which wasn't the case before) - Different qpnp-ibb-discharge-resistor value (will be addressed after LABIBB is introduced) - Different inhibit-derating-ua value (will be addressed after BCL is introduced) - Different ramp_up_step value (will be addressed after [if?] QPNP Flash LED is introduced) This DTSI is supposed to be included >>ON TOP OF<< pmi8994.dtsi, like this: -- msm8996-nice-device.dts -- \#include "pmi8994.dtsi" \#include "pmi8996.dtsi" or more likely like this: -- msm8996-some-phone.dts -- \#include "msm8996.dtsi" ... \#include "pmi8994.dtsi" -- msm8996-pmi8996-some-phone.dts -- \#include "msm8996-some-phone.dts" \#include "pmi8996.dtsi" So that we only have to keep 2 DTs for devices that were shipped with both ones, instead of what would be three (device base + pmi8994 + pmi8996) Signed-off-by: Konrad Dybcio --- changes since v2: - Add a more explanatory commit message arch/arm64/boot/dts/qcom/pmi8996.dtsi | 15 +++++++++++++++ 1 file changed, 15 insertions(+) create mode 100644 arch/arm64/boot/dts/qcom/pmi8996.dtsi diff --git a/arch/arm64/boot/dts/qcom/pmi8996.dtsi b/arch/arm64/boot/dts/qcom/pmi8996.dtsi new file mode 100644 index 000000000000..31b47209e261 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/pmi8996.dtsi @@ -0,0 +1,15 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (c) 2021, Konrad Dybcio + */ + + /* + * PMI8996 is a slight modification of PMI8994 with + * some notable changes, like being the first PMIC + * whose the bootloader has to check to continue booting + * and a change to a LABIBB parameter. + */ + +/ { + qcom,pmic-id = <0x20009 0x10013 0 0>; +}; From patchwork Tue Jun 8 15:27:35 2021 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Konrad Dybcio X-Patchwork-Id: 12307211 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org X-Spam-Level: X-Spam-Status: No, score=-16.8 required=3.0 tests=BAYES_00, HEADER_FROM_DIFFERENT_DOMAINS,INCLUDES_CR_TRAILER,INCLUDES_PATCH, MAILING_LIST_MULTI,SPF_HELO_NONE,SPF_PASS,URIBL_BLOCKED,USER_AGENT_GIT autolearn=ham autolearn_force=no version=3.4.0 Received: from mail.kernel.org (mail.kernel.org [198.145.29.99]) by smtp.lore.kernel.org (Postfix) with ESMTP id ACDBEC4743F for ; Tue, 8 Jun 2021 15:27:47 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by mail.kernel.org (Postfix) with ESMTP id 979286128E for ; Tue, 8 Jun 2021 15:27:47 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S231826AbhFHP3j (ORCPT ); Tue, 8 Jun 2021 11:29:39 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:44240 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S231253AbhFHP3h (ORCPT ); Tue, 8 Jun 2021 11:29:37 -0400 Received: from relay02.th.seeweb.it (relay02.th.seeweb.it [IPv6:2001:4b7a:2000:18::163]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id DC046C061787 for ; Tue, 8 Jun 2021 08:27:44 -0700 (PDT) Received: from localhost.localdomain (83.6.168.161.neoplus.adsl.tpnet.pl [83.6.168.161]) by m-r1.th.seeweb.it (Postfix) with ESMTPA id 916BF1F9D2; Tue, 8 Jun 2021 17:27:42 +0200 (CEST) From: Konrad Dybcio To: ~postmarketos/upstreaming@lists.sr.ht Cc: martin.botka@somainline.org, angelogioacchino.delregno@somainline.org, marijn.suijten@somainline.org, jamipkettunen@somainline.org, Konrad Dybcio , Andy Gross , Bjorn Andersson , Rob Herring , linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org Subject: [PATCH v3 2/3] arm64: dts: qcom: Add MSM8996v3.0 DTSI file Date: Tue, 8 Jun 2021 17:27:35 +0200 Message-Id: <20210608152737.154218-2-konrad.dybcio@somainline.org> X-Mailer: git-send-email 2.31.1 In-Reply-To: <20210608152737.154218-1-konrad.dybcio@somainline.org> References: <20210608152737.154218-1-konrad.dybcio@somainline.org> MIME-Version: 1.0 Precedence: bulk List-ID: X-Mailing-List: linux-arm-msm@vger.kernel.org Add an overlay for MSM8996v3.0, which is a pre-final revision of the said SoC. It has some stark differences with regards to GPU, or more specifically its power delivery path. Oh, and of course a different msm-id. Signed-off-by: Konrad Dybcio --- Changes since v2: - Remove a stray space before "/ {" arch/arm64/boot/dts/qcom/msm8996-v3.0.dtsi | 63 ++++++++++++++++++++++ 1 file changed, 63 insertions(+) create mode 100644 arch/arm64/boot/dts/qcom/msm8996-v3.0.dtsi diff --git a/arch/arm64/boot/dts/qcom/msm8996-v3.0.dtsi b/arch/arm64/boot/dts/qcom/msm8996-v3.0.dtsi new file mode 100644 index 000000000000..483676baf7e7 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8996-v3.0.dtsi @@ -0,0 +1,63 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2021, Konrad Dybcio + */ + +#include "msm8996.dtsi" + +/ { + qcom,msm-id = <246 0x30000>; + }; + + /* + * This revision seems to have differ GPU CPR + * parameters, GPU frequencies and some differences + * when it comes to voltage delivery to.. once again + * the GPU. Funnily enough, it's simpler to make it an + * overlay on top of 3.1 (the final one) than vice versa. + * The differences will show here as more and more + * features get enabled upstream. + */ + +gpu_opp_table_3_0: gpu-opp-table-30 { + compatible = "operating-points-v2"; + + opp-624000000 { + opp-hz = /bits/ 64 <624000000>; + opp-level = <7>; + }; + + opp-560000000 { + opp-hz = /bits/ 64 <560000000>; + opp-level = <6>; + }; + + opp-510000000 { + opp-hz = /bits/ 64 <510000000>; + opp-level = <5>; + }; + + opp-401800000 { + opp-hz = /bits/ 64 <401800000>; + opp-level = <4>; + }; + + opp-315000000 { + opp-hz = /bits/ 64 <315000000>; + opp-level = <3>; + }; + + opp-214000000 { + opp-hz = /bits/ 64 <214000000>; + opp-level = <3>; + }; + + opp-133000000 { + opp-hz = /bits/ 64 <133000000>; + opp-level = <3>; + }; +}; + +&gpu { + operating-points-v2 = <&gpu_opp_table_3_0>; +}; From patchwork Tue Jun 8 15:27:36 2021 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Konrad Dybcio X-Patchwork-Id: 12307213 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org X-Spam-Level: X-Spam-Status: No, score=-14.0 required=3.0 tests=BAYES_00, HEADER_FROM_DIFFERENT_DOMAINS,INCLUDES_CR_TRAILER,INCLUDES_PATCH, MAILING_LIST_MULTI,SPF_HELO_NONE,SPF_PASS,UNWANTED_LANGUAGE_BODY, URIBL_BLOCKED,USER_AGENT_GIT autolearn=ham autolearn_force=no version=3.4.0 Received: from mail.kernel.org (mail.kernel.org [198.145.29.99]) by smtp.lore.kernel.org (Postfix) with ESMTP id 45CC8C4743D for ; Tue, 8 Jun 2021 15:27:52 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by mail.kernel.org (Postfix) with ESMTP id 305E061285 for ; Tue, 8 Jun 2021 15:27:52 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S232123AbhFHP3o (ORCPT ); Tue, 8 Jun 2021 11:29:44 -0400 Received: from relay03.th.seeweb.it ([5.144.164.164]:35469 "EHLO relay03.th.seeweb.it" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S231253AbhFHP3m (ORCPT ); Tue, 8 Jun 2021 11:29:42 -0400 Received: from localhost.localdomain (83.6.168.161.neoplus.adsl.tpnet.pl [83.6.168.161]) by m-r1.th.seeweb.it (Postfix) with ESMTPA id 16FD31FF04; Tue, 8 Jun 2021 17:27:45 +0200 (CEST) From: Konrad Dybcio To: ~postmarketos/upstreaming@lists.sr.ht Cc: martin.botka@somainline.org, angelogioacchino.delregno@somainline.org, marijn.suijten@somainline.org, jamipkettunen@somainline.org, Konrad Dybcio , Andy Gross , Bjorn Andersson , Rob Herring , linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, Kees Cook , Anton Vorontsov , Colin Cross , Tony Luck Subject: [PATCH v3 3/3] arm64: dts: qcom: Add support for SONY Xperia X Performance / XZ / XZs (msm8996, Tone platform) Date: Tue, 8 Jun 2021 17:27:36 +0200 Message-Id: <20210608152737.154218-3-konrad.dybcio@somainline.org> X-Mailer: git-send-email 2.31.1 In-Reply-To: <20210608152737.154218-1-konrad.dybcio@somainline.org> References: <20210608152737.154218-1-konrad.dybcio@somainline.org> MIME-Version: 1.0 Precedence: bulk List-ID: X-Mailing-List: linux-arm-msm@vger.kernel.org From: AngeloGioacchino Del Regno Add support for following boards: - Xperia X Performance (dora) - Xperia XZ (kagura) - Xperia XZs (keyaki) They are all based on the SONY Tone platform and feature largely similar hardware with the most obvious differences being lack of USB-C and ToF sensor on Dora and different camera sensor on Keyaki. Signed-off-by: AngeloGioacchino Del Regno Signed-off-by: Konrad Dybcio --- Changes since v2: - Remove unneeded labels from the pinned(pun intended)-by-default pins arch/arm64/boot/dts/qcom/Makefile | 6 + .../msm8996-pmi8996-sony-xperia-tone-dora.dts | 11 + ...sm8996-pmi8996-sony-xperia-tone-kagura.dts | 11 + ...sm8996-pmi8996-sony-xperia-tone-keyaki.dts | 11 + .../qcom/msm8996-sony-xperia-tone-dora.dts | 27 + .../qcom/msm8996-sony-xperia-tone-kagura.dts | 15 + .../qcom/msm8996-sony-xperia-tone-keyaki.dts | 26 + .../dts/qcom/msm8996-sony-xperia-tone.dtsi | 959 ++++++++++++++++++ arch/arm64/boot/dts/qcom/msm8996.dtsi | 12 +- 9 files changed, 1072 insertions(+), 6 deletions(-) create mode 100644 arch/arm64/boot/dts/qcom/msm8996-pmi8996-sony-xperia-tone-dora.dts create mode 100644 arch/arm64/boot/dts/qcom/msm8996-pmi8996-sony-xperia-tone-kagura.dts create mode 100644 arch/arm64/boot/dts/qcom/msm8996-pmi8996-sony-xperia-tone-keyaki.dts create mode 100644 arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone-dora.dts create mode 100644 arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone-kagura.dts create mode 100644 arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone-keyaki.dts create mode 100644 arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone.dtsi diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile index f4e40589dbb5..3e2ac2365798 100644 --- a/arch/arm64/boot/dts/qcom/Makefile +++ b/arch/arm64/boot/dts/qcom/Makefile @@ -27,6 +27,12 @@ dtb-$(CONFIG_ARCH_QCOM) += msm8994-sony-xperia-kitakami-satsuki.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8994-sony-xperia-kitakami-sumire.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8994-sony-xperia-kitakami-suzuran.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8996-mtp.dtb +dtb-$(CONFIG_ARCH_QCOM) += msm8996-pmi8996-sony-xperia-tone-dora.dtb +dtb-$(CONFIG_ARCH_QCOM) += msm8996-pmi8996-sony-xperia-tone-kagura.dtb +dtb-$(CONFIG_ARCH_QCOM) += msm8996-pmi8996-sony-xperia-tone-keyaki.dtb +dtb-$(CONFIG_ARCH_QCOM) += msm8996-sony-xperia-tone-dora.dtb +dtb-$(CONFIG_ARCH_QCOM) += msm8996-sony-xperia-tone-kagura.dtb +dtb-$(CONFIG_ARCH_QCOM) += msm8996-sony-xperia-tone-keyaki.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8998-asus-novago-tp370ql.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8998-hp-envy-x2.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8998-lenovo-miix-630.dtb diff --git a/arch/arm64/boot/dts/qcom/msm8996-pmi8996-sony-xperia-tone-dora.dts b/arch/arm64/boot/dts/qcom/msm8996-pmi8996-sony-xperia-tone-dora.dts new file mode 100644 index 000000000000..b018693600a5 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8996-pmi8996-sony-xperia-tone-dora.dts @@ -0,0 +1,11 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2021, Konrad Dybcio + */ + +#include "msm8996-sony-xperia-tone-dora.dts" +#include "pmi8996.dtsi" + +/ { + model = "Sony Xperia X Performance (PMI8996)"; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8996-pmi8996-sony-xperia-tone-kagura.dts b/arch/arm64/boot/dts/qcom/msm8996-pmi8996-sony-xperia-tone-kagura.dts new file mode 100644 index 000000000000..842ea3cf557e --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8996-pmi8996-sony-xperia-tone-kagura.dts @@ -0,0 +1,11 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2021, Konrad Dybcio + */ + +#include "msm8996-sony-xperia-tone-kagura.dts" +#include "pmi8996.dtsi" + +/ { + model = "Sony Xperia XZ (PMI8996)"; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8996-pmi8996-sony-xperia-tone-keyaki.dts b/arch/arm64/boot/dts/qcom/msm8996-pmi8996-sony-xperia-tone-keyaki.dts new file mode 100644 index 000000000000..b3f9062da4b0 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8996-pmi8996-sony-xperia-tone-keyaki.dts @@ -0,0 +1,11 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2021, Konrad Dybcio + */ + +#include "msm8996-sony-xperia-tone-keyaki.dts" +#include "pmi8996.dtsi" + +/ { + model = "Sony Xperia XZs (PMI8996)"; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone-dora.dts b/arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone-dora.dts new file mode 100644 index 000000000000..b4cca54dcb68 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone-dora.dts @@ -0,0 +1,27 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2021, AngeloGioacchino Del Regno + * + * Copyright (c) 2021, Konrad Dybcio + */ + +/dts-v1/; + +#include "msm8996-sony-xperia-tone.dtsi" + +/ { + model = "Sony Xperia X Performance"; + compatible = "sony,dora-row", "qcom,msm8996"; +}; + +/delete-node/ &tof_sensor; +/delete-node/ &pm8994_l11; +/delete-node/ &pm8994_l14; + +&usb_detect { + pins = "gpio24"; +}; + +&usb3_id { + id-gpio = <&tlmm 24 GPIO_ACTIVE_LOW>; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone-kagura.dts b/arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone-kagura.dts new file mode 100644 index 000000000000..be6ea855fcce --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone-kagura.dts @@ -0,0 +1,15 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2021, AngeloGioacchino Del Regno + * + * Copyright (c) 2021, Konrad Dybcio + */ + +/dts-v1/; + +#include "msm8996-sony-xperia-tone.dtsi" + +/ { + model = "Sony Xperia XZ"; + compatible = "sony,kagura-row", "qcom,msm8996"; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone-keyaki.dts b/arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone-keyaki.dts new file mode 100644 index 000000000000..1eee7d0fc178 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone-keyaki.dts @@ -0,0 +1,26 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2021, AngeloGioacchino Del Regno + * + * Copyright (c) 2021, Konrad Dybcio + */ + +/dts-v1/; + +#include "msm8996-sony-xperia-tone.dtsi" + +/ { + model = "Sony Xperia XZs"; + compatible = "sony,keyaki-row", "qcom,msm8996"; +}; + +&pm8994_l19 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2700000>; +}; + +&pm8994_l30 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-pull-down; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone.dtsi b/arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone.dtsi new file mode 100644 index 000000000000..1f71b3b2dc57 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone.dtsi @@ -0,0 +1,959 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2021, AngeloGioacchino Del Regno + * + * Copyright (c) 2021, Konrad Dybcio + */ + +#include "msm8996.dtsi" +#include "pm8994.dtsi" +#include "pmi8994.dtsi" +#include +#include +#include +#include + +/delete-node/ &hdmi; +/delete-node/ &hdmi_phy; +/delete-node/ &mdp5_intf3_out; +/delete-node/ &slpi_region; +/delete-node/ &venus_region; +/delete-node/ &zap_shader_region; + +/ { + qcom,msm-id = <246 0x30001>; /* MSM8996 V3.1 (Final) */ + qcom,pmic-id = <0x20009 0x2000a 0 0>; /* PM8994 + PMI8994 */ + qcom,board-id = <8 0>; + + chosen { + /* + * Due to an unknown-for-a-few-years regression, + * SDHCI only works on MSM8996 in PIO (lame) mode. + */ + bootargs = "sdhci.debug_quirks=0x40 sdhci.debug_quirks2=0x4 maxcpus=2"; + }; + + reserved-memory { + ramoops@a7f00000 { + compatible = "ramoops"; + reg = <0 0xa7f00000 0 0x100000>; + record-size = <0x20000>; + console-size = <0x40000>; + ftrace-size = <0x20000>; + pmsg-size = <0x20000>; + ecc-size = <16>; + }; + + cont_splash_mem: memory@83401000 { + reg = <0 0x83401000 0 0x23ff000>; + no-map; + }; + + zap_shader_region: gpu@90400000 { + compatible = "shared-dma-pool"; + reg = <0x0 0x90400000 0x0 0x2000>; + no-map; + }; + + slpi_region: memory@90500000 { + reg = <0 0x90500000 0 0xa00000>; + no-map; + }; + + venus_region: memory@90f00000 { + reg = <0 0x90f00000 0 0x500000>; + no-map; + }; + }; + + panel_tvdd: tvdd-regulator { + compatible = "regulator-fixed"; + regulator-name = "panel_tvdd"; + gpio = <&tlmm 50 GPIO_ACTIVE_HIGH>; + pinctrl-0 = <&tp_vddio_en>; + pinctrl-names = "default"; + }; + + usb3_id: usb3-id { + compatible = "linux,extcon-usb-gpio"; + id-gpio = <&tlmm 25 GPIO_ACTIVE_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&usb_detect>; + }; + + vph_pwr: vph-pwr-regulator { + compatible = "regulator-fixed"; + regulator-min-microvolt = <3700000>; + regulator-max-microvolt = <3700000>; + regulator-name = "vph_pwr"; + regulator-always-on; + regulator-boot-on; + }; + + wlan_en: wlan-en-1-8v { + compatible = "regulator-fixed"; + regulator-name = "wlan-en-regulator"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + gpio = <&tlmm 84 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&wl_reg_on>; + + /* WLAN card specific delay */ + startup-delay-us = <70000>; + enable-active-high; + }; +}; + +&blsp1_i2c3 { + status = "okay"; + clock-frequency = <355000>; + + tof_sensor: vl53l0x@29 { + compatible = "st,vl53l0x"; + reg = <0x29>; + }; +}; + +&blsp1_uart2 { + status = "okay"; +}; + +&blsp2_i2c5 { + status = "okay"; + clock-frequency = <355000>; + + /* FUSB301 USB-C controller */ +}; + +&blsp2_i2c6 { + status = "okay"; + clock-frequency = <355000>; + + synaptics@2c { + compatible = "syna,rmi4-i2c"; + reg = <0x2c>; + interrupt-parent = <&tlmm>; + interrupts = <125 IRQ_TYPE_EDGE_FALLING>; + vdd-supply = <&panel_tvdd>; + + syna,reset-delay-ms = <220>; + syna,startup-delay-ms = <220>; + #address-cells = <1>; + #size-cells = <0>; + + rmi4-f01@1 { + reg = <0x1>; + syna,nosleep-mode = <1>; + }; + + rmi4-f11@11 { + reg = <0x11>; + syna,sensor-type = <1>; + }; + }; +}; + +&blsp2_uart2 { + status = "okay"; +}; + +&camera0_mclk { + drive-strength = <2>; + output-low; +}; + +&camera0_pwdn { + drive-strength = <2>; + output-low; +}; + +&camera0_rst { + pins = "gpio30"; + drive-strength = <2>; + output-low; +}; + +&camera2_mclk { + drive-strength = <2>; + output-low; +}; + +&camera2_rst { + drive-strength = <2>; + output-low; +}; + +&hsusb_phy1 { + status = "okay"; + + vdda-pll-supply = <&pm8994_l12>; + vdda-phy-dpdm-supply = <&pm8994_l24>; +}; + +&mmcc { + vdd-gfx-supply = <&vdd_gfx>; +}; + +&pcie0 { + status = "okay"; + perst-gpio = <&tlmm 35 GPIO_ACTIVE_LOW>; + wake-gpio = <&tlmm 37 GPIO_ACTIVE_HIGH>; + vddpe-3v3-supply = <&wlan_en>; + vdda-supply = <&pm8994_l28>; +}; + +&pcie_phy { + status = "okay"; + + vdda-phy-supply = <&pm8994_l28>; + vdda-pll-supply = <&pm8994_l12>; +}; + +&pm8994_gpios { + pinctrl-names = "default"; + pinctrl-0 = <&pm8994_gpios_defaults>; + gpio-line-names = + "NC", + "VOL_DOWN_N", + "VOL_UP_N", + "SNAPSHOT_N", + "FOCUS_N", + "NC", + "NFC_VEN", + "NC", + "NC", + "NC", + "NC", + "NC", + "EAR_EN", + "NC", + "PM_DIVCLK1", + "PMI_CLK", + "NC", + "WL_SLEEP_CLK", + "NC", + "PMIC_SPON", + "UIM_BATT_ALARM", + "PMK_SLEEP_CLK"; + + /* + * We don't yet know for sure which GPIOs are of our interest, but what + * we do know is that if a vendor sets the pins to a non-default state, there's + * probably a reason for it, and just to be on the safe side, we follow suit. + */ + pm8994_gpios_defaults: pm8994-gpios-default-state { + pm8994-gpio1-nc { + pins = "gpio1"; + function = PMIC_GPIO_FUNC_NORMAL; + drive-push-pull; + bias-high-impedance; + }; + + vol-down-n { + pins = "gpio2"; + function = PMIC_GPIO_FUNC_NORMAL; + drive-push-pull; + input-enable; + bias-pull-up; + qcom,drive-strength = ; + power-source = ; + }; + + vol-up-n { + pins = "gpio3"; + function = PMIC_GPIO_FUNC_NORMAL; + drive-push-pull; + input-enable; + bias-pull-up; + power-source = ; + }; + + camera-snapshot-n { + pins = "gpio4"; + function = PMIC_GPIO_FUNC_NORMAL; + drive-push-pull; + input-enable; + bias-pull-up; + qcom,drive-strength = ; + power-source = ; + }; + + camera-focus-n { + pins = "gpio5"; + function = PMIC_GPIO_FUNC_NORMAL; + drive-push-pull; + input-enable; + bias-pull-up; + qcom,drive-strength = ; + power-source = ; + }; + + pm8994-gpio6-nc { + pins = "gpio6"; + function = PMIC_GPIO_FUNC_NORMAL; + drive-push-pull; + bias-high-impedance; + power-source = ; + }; + + nfc-download { + pins = "gpio7"; + function = PMIC_GPIO_FUNC_NORMAL; + output-low; + drive-push-pull; + bias-disable; + qcom,drive-strength = ; + power-source = ; + }; + + pm8994-gpio8-nc { + pins = "gpio8"; + function = PMIC_GPIO_FUNC_NORMAL; + output-low; + drive-push-pull; + bias-high-impedance; + qcom,drive-strength = ; + power-source = ; + }; + + pm8994-gpio9-nc { + pins = "gpio9"; + function = PMIC_GPIO_FUNC_NORMAL; + output-high; + drive-push-pull; + bias-high-impedance; + qcom,drive-strength = ; + power-source = ; + }; + + nfc-clock { + pins = "gpio10"; + function = PMIC_GPIO_FUNC_NORMAL; + input-enable; + drive-push-pull; + bias-pull-down; + qcom,drive-strength = ; + power-source = ; + }; + + pm8994-gpio11-nc { + pins = "gpio11"; + function = PMIC_GPIO_FUNC_NORMAL; + drive-push-pull; + bias-high-impedance; + power-source = ; + }; + + pm8994-gpio12-nc { + pins = "gpio12"; + function = PMIC_GPIO_FUNC_NORMAL; + drive-push-pull; + bias-high-impedance; + power-source = ; + }; + + ear-enable { + pins = "gpio13"; + function = PMIC_GPIO_FUNC_NORMAL; + output-high; + drive-push-pull; + bias-disable; + qcom,drive-strength = ; + power-source = ; + }; + + pm8994-gpio14-nc { + pins = "gpio14"; + function = PMIC_GPIO_FUNC_NORMAL; + drive-push-pull; + input-enable; + bias-high-impedance; + qcom,drive-strength = ; + power-source = ; + }; + + pm-divclk1-gpio { + pins = "gpio15"; + function = "func1"; + output-high; + drive-push-pull; + bias-high-impedance; + qcom,drive-strength = ; + power-source = ; + }; + + pmi-clk-gpio { + pins = "gpio16"; + function = PMIC_GPIO_FUNC_NORMAL; + drive-push-pull; + }; + + pm8994-gpio17-nc { + pins = "gpio17"; + function = PMIC_GPIO_FUNC_NORMAL; + drive-push-pull; + bias-high-impedance; + power-source = ; + }; + + rome-sleep { + pins = "gpio18"; + function = PMIC_GPIO_FUNC_FUNC2; + output-low; + drive-push-pull; + bias-disable; + qcom,drive-strength = ; + power-source = ; + }; + + pm8994-gpio19-nc { + pins = "gpio19"; + function = PMIC_GPIO_FUNC_NORMAL; + output-low; + drive-push-pull; + bias-high-impedance; + qcom,drive-strength = ; + power-source = ; + }; + + pm8994-gpio22-nc { + pins = "gpio22"; + function = PMIC_GPIO_FUNC_NORMAL; + drive-push-pull; + bias-high-impedance; + power-source = ; + }; + }; +}; + +&pm8994_mpps { + pinctrl-names = "default"; + pinctrl-0 = <&pm8994_mpps_defaults>; + + gpio-line-names = + "SDC_UIM_VBIAS", + "LCD_ID_ADC", + "VREF_DACX", + "NC", + "FLASH_THERM", + "NC", + "NC", + "RF_ID"; + + pm8994_mpps_defaults: pm8994-mpps-default-state { + lcd-id_adc-mpp { + pins = "mpp2"; + function = PMIC_MPP_FUNC_ANALOG; + input-enable; + qcom,amux-route = ; + }; + + pm-mpp4-nc { + pins = "mpp4"; + function = PMIC_MPP_FUNC_DIGITAL; + bias-high-impedance; + power-source = ; + }; + + flash-therm-mpp { + pins = "mpp5"; + function = PMIC_MPP_FUNC_ANALOG; + input-enable; + qcom,amux-route = ; + }; + + mpp6-nc { + pins = "mpp6"; + function = PMIC_MPP_FUNC_DIGITAL; + bias-high-impedance; + }; + + rf-id-mpp { + pins = "mpp8"; + function = PMIC_MPP_FUNC_ANALOG; + input-enable; + qcom,amux-route = ; + }; + }; +}; + +&pm8994_resin { + status = "okay"; + linux,code = ; +}; + +&pmi8994_gpios { + pinctrl-names = "default"; + pinctrl-0 = <&pmi8994_gpios_defaults>; + + gpio-line-names = + "VIB_LDO_EN", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "USB_SWITCH_SEL", + "NC"; + + pmi8994_gpios_defaults: pmi8994-gpios-default-state { + vib-ldo-en-gpio { + pins = "gpio1"; + function = PMIC_GPIO_FUNC_NORMAL; + drive-push-pull; + output-low; + bias-disable; + power-source = ; + }; + + pmi-gpio2-nc { + pins = "gpio2"; + function = PMIC_GPIO_FUNC_NORMAL; + drive-push-pull; + input-enable; + bias-high-impedance; + qcom,drive-strength = ; + power-source = ; + }; + + pmi-gpio3-nc { + pins = "gpio3"; + function = PMIC_GPIO_FUNC_NORMAL; + drive-push-pull; + input-enable; + bias-high-impedance; + qcom,drive-strength = ; + power-source = ; + }; + + pmi-gpio4-nc { + pins = "gpio4"; + function = PMIC_GPIO_FUNC_NORMAL; + drive-push-pull; + output-high; + qcom,drive-strength = ; + power-source = ; + }; + + pmi-gpio5-nc { + pins = "gpio5"; + function = PMIC_GPIO_FUNC_NORMAL; + drive-push-pull; + output-high; + qcom,drive-strength = ; + power-source = ; + }; + + pmi-gpio6-nc { + pins = "gpio6"; + function = PMIC_GPIO_FUNC_NORMAL; + drive-push-pull; + output-high; + qcom,drive-strength = ; + power-source = ; + }; + + pmi-gpio7-nc { + pins = "gpio7"; + function = PMIC_GPIO_FUNC_NORMAL; + drive-push-pull; + output-high; + qcom,drive-strength = ; + power-source = ; + }; + + pmi-gpio8-nc { + pins = "gpio8"; + function = PMIC_GPIO_FUNC_NORMAL; + drive-push-pull; + output-high; + qcom,drive-strength = ; + power-source = ; + }; + + usb-switch-sel { + pins = "gpio9"; + function = PMIC_GPIO_FUNC_NORMAL; + drive-push-pull; + }; + + pmi-gpio10-nc { + pins = "gpio10"; + function = PMIC_GPIO_FUNC_NORMAL; + output-low; + drive-push-pull; + bias-disable; + qcom,drive-strength = ; + power-source = ; + }; + }; +}; + +&pmi8994_spmi_regulators { + qcom,saw-reg = <&saw3>; + + vdd_gfx: + pmi8994_s2: s2 { + /* Pinned to a high value for now to avoid random crashes. */ + regulator-min-microvolt = <1015000>; + regulator-max-microvolt = <1015000>; + regulator-name = "vdd_gfx"; + regulator-always-on; + }; + + pmi8994_s9: s9 { + qcom,saw-slave; + }; + + pmi8994_s10: s10 { + qcom,saw-slave; + }; + + pmi8994_s11: s11 { + qcom,saw-leader; + regulator-always-on; + regulator-min-microvolt = <470000>; + regulator-max-microvolt = <1140000>; + }; +}; + +&pmi8994_wled { + status = "okay"; + default-brightness = <512>; +}; + +&rpm_requests { + pm8994-regulators { + compatible = "qcom,rpm-pm8994-regulators"; + + vdd_s1-supply = <&vph_pwr>; + vdd_s2-supply = <&vph_pwr>; + vdd_s3-supply = <&vph_pwr>; + vdd_s4-supply = <&vph_pwr>; + vdd_s5-supply = <&vph_pwr>; + vdd_s6-supply = <&vph_pwr>; + vdd_s7-supply = <&vph_pwr>; + vdd_s8-supply = <&vph_pwr>; + vdd_s9-supply = <&vph_pwr>; + vdd_s10-supply = <&vph_pwr>; + vdd_s11-supply = <&vph_pwr>; + vdd_s12-supply = <&vph_pwr>; + vdd_l1-supply = <&pm8994_s3>; + vdd_l2_l26_l28-supply = <&pm8994_s3>; + vdd_l3_l11-supply = <&pm8994_s3>; + vdd_l4_l27_l31-supply = <&pm8994_s3>; + vdd_l5_l7-supply = <&pm8994_s5>; + vdd_l6_l12_l32-supply = <&pm8994_s5>; + vdd_l8_l16_l30-supply = <&vph_pwr>; + vdd_l14_l15-supply = <&pm8994_s5>; + vdd_l20_l21-supply = <&pm8994_s5>; + vdd_l25-supply = <&pm8994_s3>; + vdd_lvs1_2-supply = <&pm8994_s4>; + + pm8994_s3: s3 { + regulator-min-microvolt = <1300000>; + regulator-max-microvolt = <1300000>; + }; + + pm8994_s4: s4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-system-load = <325000>; + regulator-always-on; + }; + + pm8994_s5: s5 { + regulator-min-microvolt = <2150000>; + regulator-max-microvolt = <2150000>; + }; + + pm8994_s7: s7 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <800000>; + }; + + pm8994_l1: l1 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + }; + + pm8994_l2: l2 { + regulator-min-microvolt = <1250000>; + regulator-max-microvolt = <1250000>; + }; + + pm8994_l3: l3 { + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + }; + + pm8994_l4: l4 { + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + }; + + /* L6 and L7 seem unused. */ + + pm8994_l8: l8 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8994_l9: l9 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8994_l10: l10 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8994_l11: l11 { + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + }; + + pm8994_l12: l12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-allow-set-load; + }; + + pm8994_l13: l13 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + regulator-system-load = <22000>; + regulator-allow-set-load; + }; + + pm8994_l14: l14 { + regulator-min-microvolt = <1700000>; + regulator-max-microvolt = <1900000>; + }; + + pm8994_l15: l15 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8994_l16: l16 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2700000>; + }; + + pm8994_l17: l17 { + regulator-min-microvolt = <2200000>; + regulator-max-microvolt = <2500000>; + }; + + pm8994_l18: l18 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8994_l19: l19 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + }; + + pm8994_l20: l20 { + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + regulator-system-load = <570000>; + regulator-allow-set-load; + }; + + pm8994_l21: l21 { + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + regulator-system-load = <800000>; + regulator-allow-set-load; + }; + + pm8994_l22: l22 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + }; + + pm8994_l23: l23 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2700000>; + }; + + pm8994_l24: l24 { + regulator-min-microvolt = <3075000>; + regulator-max-microvolt = <3075000>; + regulator-allow-set-load; + }; + + pm8994_l25: l25 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-allow-set-load; + }; + + pm8994_l27: l27 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1200000>; + }; + + pm8994_l28: l28 { + regulator-min-microvolt = <925000>; + regulator-max-microvolt = <925000>; + regulator-allow-set-load; + }; + + pm8994_l29: l29 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2700000>; + }; + + pm8994_l30: l30 { }; + + pm8994_l32: l32 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + }; +}; + +&sdhc1 { + /* eMMC doesn't seem to cooperate even in PIO mode.. */ + status = "disabled"; + + vmmc-supply = <&pm8994_l20>; + vqmmc-supply = <&pm8994_s4>; + mmc-hs400-1_8v; + mmc-hs200-1_8v; +}; + +&sdhc2 { + status = "okay"; + + cd-gpios = <&tlmm 40 GPIO_ACTIVE_HIGH>; + vmmc-supply = <&pm8994_l21>; + vqmmc-supply = <&pm8994_l13>; +}; + +&tlmm { + gpio-reserved-ranges = <0 4>; + pinctrl-0 = <&sw_service_gpio>; + pinctrl-names = "default"; + + disp_reset_n_gpio: disp-reset-n { + pins = "gpio8"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + mdp_vsync_p_gpio: mdp-vsync-p { + pins = "gpio10"; + function = "mdp_vsync"; + drive-strength = <2>; + bias-disable; + }; + + sw_service_gpio: sw-service-gpio { + pins = "gpio16"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + + usb_detect: usb-detect { + pins = "gpio25"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + output-high; + }; + + uim_detect_en: uim-detect-en { + pins = "gpio29"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + output-high; + }; + + tray_det_pin: tray-det { + pins = "gpio40"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + tp_vddio_en: tp-vddio-en { + pins = "gpio50"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + output-high; + }; + + lcd_vddio_en: lcd-vddio-en { + pins = "gpio51"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + output-low; + }; + + wl_host_wake: wl-host-wake { + pins = "gpio79"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + input-high; + }; + + wl_reg_on: wl-reg-on { + pins = "gpio84"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + output-low; + }; + + ts_reset_n: ts-rst-n { + pins = "gpio89"; + function = "gpio"; + drive-strength = <2>; + }; + + touch_int_n: touch-int-n { + pins = "gpio125"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + + touch_int_sleep: touch-int-sleep { + pins = "gpio125"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; +}; + +/* + * For reasons that are currently unknown (but probably related to fusb301), USB takes about + * 6 minutes to wake up (nothing interesting in kernel logs), but then it works as it should. + */ +&usb3 { + status = "okay"; + qcom,select-utmi-as-pipe-clk; +}; + +&usb3_dwc3 { + extcon = <&usb3_id>; + dr_mode = "peripheral"; + phys = <&hsusb_phy1>; + phy-names = "usb2-phy"; + snps,hird-threshold = /bits/ 8 <0>; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi index 859fe18aa8c7..2f04a2bc052c 100644 --- a/arch/arm64/boot/dts/qcom/msm8996.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi @@ -848,21 +848,21 @@ cci0_default: cci0-default { camera0_state_on: camera_rear_default: camera-rear-default { - mclk0 { + camera0_mclk: mclk0 { pins = "gpio13"; function = "cam_mclk"; drive-strength = <16>; bias-disable; }; - rst { + camera0_rst: rst { pins = "gpio25"; function = "gpio"; drive-strength = <16>; bias-disable; }; - pwdn { + camera0_pwdn: pwdn { pins = "gpio26"; function = "gpio"; drive-strength = <16>; @@ -903,14 +903,14 @@ rst { camera2_state_on: camera_front_default: camera-front-default { - mclk2 { + camera2_mclk: mclk2 { pins = "gpio15"; function = "cam_mclk"; drive-strength = <16>; bias-disable; }; - rst { + camera2_rst: rst { pins = "gpio23"; function = "gpio"; drive-strength = <16>; @@ -2327,7 +2327,7 @@ usb3: usb@6af8800 { power-domains = <&gcc USB30_GDSC>; status = "disabled"; - dwc3@6a00000 { + usb3_dwc3: dwc3@6a00000 { compatible = "snps,dwc3"; reg = <0x06a00000 0xcc00>; interrupts = <0 131 IRQ_TYPE_LEVEL_HIGH>;