From patchwork Thu Aug 5 22:28:10 2021 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Konrad Dybcio X-Patchwork-Id: 12422213 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org X-Spam-Level: X-Spam-Status: No, score=-16.8 required=3.0 tests=BAYES_00, HEADER_FROM_DIFFERENT_DOMAINS,INCLUDES_CR_TRAILER,INCLUDES_PATCH, MAILING_LIST_MULTI,SPF_HELO_NONE,SPF_PASS,USER_AGENT_GIT autolearn=ham autolearn_force=no version=3.4.0 Received: from mail.kernel.org (mail.kernel.org [198.145.29.99]) by smtp.lore.kernel.org (Postfix) with ESMTP id 1316EC4338F for ; Thu, 5 Aug 2021 22:28:22 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by mail.kernel.org (Postfix) with ESMTP id E0D8461151 for ; Thu, 5 Aug 2021 22:28:21 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S239260AbhHEW2f (ORCPT ); Thu, 5 Aug 2021 18:28:35 -0400 Received: from relay01.th.seeweb.it ([5.144.164.162]:57831 "EHLO relay01.th.seeweb.it" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S231725AbhHEW2f (ORCPT ); Thu, 5 Aug 2021 18:28:35 -0400 Received: from localhost.localdomain (83.6.167.155.neoplus.adsl.tpnet.pl [83.6.167.155]) by m-r1.th.seeweb.it (Postfix) with ESMTPA id C546D200D9; Fri, 6 Aug 2021 00:28:17 +0200 (CEST) From: Konrad Dybcio To: ~postmarketos/upstreaming@lists.sr.ht List-Id: Cc: martin.botka@somainline.org, angelogioacchino.delregno@somainline.org, marijn.suijten@somainline.org, jamipkettunen@somainline.org, Konrad Dybcio , Arnd Bergmann , Olof Johansson , soc@kernel.org, Rob Herring , Andy Gross , Bjorn Andersson , linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-arm-msm@vger.kernel.org Subject: [PATCH] ARM: dts: Add MDM9607, PM8019 and Quectel EG25-G DTS files Date: Fri, 6 Aug 2021 00:28:10 +0200 Message-Id: <20210805222812.40731-1-konrad.dybcio@somainline.org> X-Mailer: git-send-email 2.32.0 MIME-Version: 1.0 Precedence: bulk List-ID: X-Mailing-List: linux-arm-msm@vger.kernel.org Add base DTS files for MDM9607 SoC, PM8019 PMIC and Quectel EG25-G USB LTE modem, used in devices like the Pine64 PinePhone. Signed-off-by: Konrad Dybcio --- arch/arm/boot/dts/Makefile | 1 + .../boot/dts/qcom-mdm9607-quectel-eg25-g.dts | 186 ++++ arch/arm/boot/dts/qcom-mdm9607.dtsi | 889 ++++++++++++++++++ arch/arm/boot/dts/qcom-pm8019.dtsi | 100 ++ 4 files changed, 1176 insertions(+) create mode 100644 arch/arm/boot/dts/qcom-mdm9607-quectel-eg25-g.dts create mode 100644 arch/arm/boot/dts/qcom-mdm9607.dtsi create mode 100644 arch/arm/boot/dts/qcom-pm8019.dtsi diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 863347b6b65e..f309490f74ec 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -933,6 +933,7 @@ dtb-$(CONFIG_ARCH_QCOM) += \ qcom-ipq4019-ap.dk07.1-c2.dtb \ qcom-ipq8064-ap148.dtb \ qcom-ipq8064-rb3011.dtb \ + qcom-mdm9607-quectel-eg25-g.dtb \ qcom-msm8660-surf.dtb \ qcom-msm8960-cdp.dtb \ qcom-msm8974-fairphone-fp2.dtb \ diff --git a/arch/arm/boot/dts/qcom-mdm9607-quectel-eg25-g.dts b/arch/arm/boot/dts/qcom-mdm9607-quectel-eg25-g.dts new file mode 100644 index 000000000000..2d574884e8aa --- /dev/null +++ b/arch/arm/boot/dts/qcom-mdm9607-quectel-eg25-g.dts @@ -0,0 +1,186 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2021, Konrad Dybcio + */ +#include "qcom-mdm9607.dtsi" +#include "qcom-pm8019.dtsi" +#include +#include +#include + +/ { + model = "Quectel EG25-G Modem"; + compatible = "quectel,eg25-g", "qcom,mdm9607"; + qcom,msm-id = <290 0x10000>, <296 0x10000>, <297 0x10000>, <298 0x10000>, <299 0x10000>; + qcom,board-id = <8 0>; + + memory { + device_type = "memory"; + reg = <0x0 0x0>; + }; + + usb_extcon: usb-extcon { + compatible = "linux,extcon-usb-gpio"; + vbus-gpio = <&pm8019_mpps 2 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&usbdet_mpp>; + }; +}; + +&blsp1_i2c2 { + status = "okay"; +}; + +&blsp1_i2c4 { + status = "okay"; + + /delete-property/ pinctrl-names; + /delete-property/ pinctrl-0; +}; + +&blsp1_uart2 { + status = "okay"; +}; + +&blsp1_uart3 { + status = "okay"; +}; + +/* Debug UART */ +&blsp1_uart5 { + status = "okay"; +}; + +&nand { + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@27a0000 { + label = "recovery"; + reg = <0x27a0000 0x7c0000>; + }; + + partition@2f60000 { + label = "modem"; + reg = <0x2f60000 0x3580000>; + }; + + partition@6580000 { + label = "recoveryfs"; + reg = <0x6580000 0x1440000>; + }; + + partition@79c0000 { + label = "usr_data"; + reg = <0x79c0000 0x3d80000>; + }; + + partition@b7c0000 { + label = "system"; + reg = <0xb7c0000 0x4840000>; + }; + }; +}; + +&pm8019_mpps { + pinctrl-names = "default"; + pinctrl-0 = <&usb_mpp>; + + usb_mpp: usb-mpp { + pins = "mpp1"; + function = "digital"; + bias-pull-up = <10000>; + + power-source = <3>; /* 1.8V (L11) */ + }; + + usbdet_mpp: usbdet-mpp { + pins = "mpp2"; + function = "digital"; + bias-disable; + }; +}; + +/* NAND ID: 0x1590aaad | 256MiB | 4-bit ECC */ +&qpic_nand { + /* + * This can only be enabled after interconnect lands, otherwise the SoC + * absolutely loses its mind and randomly drops registers, leading to + * null pointer exceptions! + */ + status = "disabled"; +}; + +&qpic_bam { + status = "okay"; +}; + +&tlmm { + pinctrl-names = "default"; + pinctrl-0 = <&undocumented_tlmm_gpios>; + + undocumented_tlmm_gpios: undocumented-tlmm-gpios { + undocumented-gpio18 { + pins = "gpio18"; + function = "gpio"; + drive-strength = <16>; + bias-pull-up; + }; + + undocumented-gpio19 { + pins = "gpio19"; + function = "gpio"; + drive-strength = <16>; + bias-pull-up; + }; + + undocumented-gpio24 { + pins = "gpio24"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + wakeup-in-n { + pins = "gpio25"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + + undocumented-gpio55 { + pins = "gpio55"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + output-low; + }; + + undocumented-gpio56 { + pins = "gpio56"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + input-low; + }; + + undocumented-gpio57 { + pins = "gpio57"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + output-low; + }; + }; +}; + +&usb { + status = "okay"; + extcon = <&usb_extcon>, <&usb_extcon>; +}; + +&usb_hs_phy { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/qcom-mdm9607.dtsi b/arch/arm/boot/dts/qcom-mdm9607.dtsi new file mode 100644 index 000000000000..f1b11af2be8f --- /dev/null +++ b/arch/arm/boot/dts/qcom-mdm9607.dtsi @@ -0,0 +1,889 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2021, Konrad Dybcio + */ +/dts-v1/; + +#include +#include +#include +#include +#include +/ { + #address-cells = <1>; + #size-cells = <1>; + interrupt-parent = <&intc>; + + clocks { + xo_board: xo-board { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <19200000>; + clock-output-names = "xo_board"; + }; + + sleep_clk: sleep-clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + }; + + nand_clk_dummy: nand-clk-dummy { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32000>; + }; + }; + + chosen { }; + + cpus { + #size-cells = <0>; + #address-cells = <1>; + + CPU0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0x0>; + }; + }; + + firmware { + scm: scm { + compatible = "qcom,scm-mdm9607", "qcom,scm"; + clocks = <&gcc GCC_CRYPTO_CLK>, + <&gcc GCC_CRYPTO_AXI_CLK>, + <&gcc GCC_CRYPTO_AHB_CLK>; + clock-names = "core", "bus", "iface"; + #reset-cells = <1>; + + qcom,dload-mode = <&tcsr 0x6100>; + }; + }; + + pmu { + compatible = "arm,cortex-a7-pmu"; + interrupts = ; + }; + + pps: pps { + compatible = "pps-gpio"; + gpios = <&tlmm 53 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pps_gpio>; + }; + + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + mpss_mem: memory@82a00000 { + reg = <0x82a00000 0x5000000>; + no-map; + }; + + cnss_debug_mem: memory@87a00000 { + reg = <0x87a00000 0x200000>; + no-map; + }; + + external_image_mem: memory@87c00000 { + reg = <0x87c00000 0x100000>; + no-map; + }; + + smem_region: smem@87d00000 { + reg = <0x87d00000 0x100000>; + no-map; + }; + + /* + * This region is originally a part of external_image_mem + * (which on downstream includes smem, how horrific!) and we + * strictly have to protect it. Not doing so will cause an + * imprecise external abort, probably induced by the firmware. + */ + firmware_region: memory@87e00000 { + reg = <0x87e00000 0x200000>; + no-map; + }; + + qseecom_mem: memory@8f800000 { + reg = <0x8f800000 0x100000>; + no-map; + }; + + mba_mem: memory@8f900000 { + reg = <0x8f900000 0x100000>; + no-map; + }; + + audio_mem: memory@8fc00000 { + reg = <0x8fc00000 0x400000>; + no-map; + }; + }; + + smd { + compatible = "qcom,smd"; + + rpm { + interrupts = ; + qcom,ipc = <&apcs 8 0>; + qcom,smd-edge = <15>; + + rpm_requests: rpm-requests { + compatible = "qcom,rpm-msm8916"; + qcom,smd-channels = "rpm_requests"; + + rpmcc: clock-controller { + compatible = "qcom,rpmcc-mdm9607", "qcom,rpmcc"; + #clock-cells = <1>; + }; + + rpmpd: power-controller { + compatible = "qcom,mdm9607-rpmpd"; + #power-domain-cells = <1>; + operating-points-v2 = <&rpmpd_opp_table>; + + rpmpd_opp_table: opp-table { + compatible = "operating-points-v2"; + + rpmpd_opp_ret: opp1 { + opp-level = ; + }; + + rpmpd_opp_ret_plus: opp2 { + opp-level = ; + }; + + rpmpd_opp_min_svs: opp3 { + opp-level = ; + }; + + rpmpd_opp_low_svs: opp4 { + opp-level = ; + }; + + rpmpd_opp_svs: opp5 { + opp-level = ; + }; + + rpmpd_opp_svs_plus: opp6 { + opp-level = ; + }; + + rpmpd_opp_nom: opp7 { + opp-level = ; + }; + + rpmpd_opp_nom_plus: opp8 { + opp-level = ; + }; + + rpmpd_opp_turbo: opp9 { + opp-level = ; + }; + }; + }; + }; + }; + }; + + smem { + compatible = "qcom,smem"; + + memory-region = <&smem_region>; + qcom,rpm-msg-ram = <&rpm_msg_ram>; + + hwlocks = <&tcsr_mutex 3>; + }; + + soc: soc { + #address-cells = <1>; + #size-cells = <1>; + ranges; + compatible = "simple-bus"; + + rng@22000 { + compatible = "qcom,prng"; + reg = <0x00022000 0x140>; + clocks = <&gcc GCC_PRNG_AHB_CLK>; + clock-names = "core"; + }; + + rpm_msg_ram: memory@60000 { + compatible = "qcom,rpm-msg-ram"; + reg = <0x00060000 0x8000>; + }; + + usb_hs_phy: phy@6c000 { + compatible = "qcom,usb-hs-28nm-mdm9607"; + reg = <0x0006c000 0x200>; + #phy-cells = <0>; + clocks = <&xo_board>, <&gcc GCC_USB_HS_PHY_CFG_AHB_CLK>, + <&gcc GCC_USB2A_PHY_SLEEP_CLK>; + clock-names = "ref", "ahb", "sleep"; + resets = <&gcc QUSB2_PHY_BCR>, <&gcc USB2_HS_PHY_ONLY_BCR>; + reset-names = "phy", "por"; + status = "disabled"; + }; + + qfprom: qfprom@a4000 { + compatible = "qcom,qfprom"; + reg = <0x000a4000 0x1000>; + #address-cells = <1>; + #size-cells = <1>; + tsens_caldata: calib@228 { + reg = <0x228 0xc>; + }; + }; + + tsens: thermal-sensor@4a9000 { + compatible = "qcom,mdm9607-tsens", "qcom,tsens-v0_1"; + reg = <0x004a9000 0x1000>, /* TM */ + <0x004a8000 0x1000>; /* SROT */ + nvmem-cells = <&tsens_caldata>; + nvmem-cell-names = "calib"; + #qcom,sensors = <5>; + interrupts = ; + interrupt-names = "uplow"; + #thermal-sensor-cells = <1>; + }; + + cryptobam: dma@704000 { + compatible = "qcom,bam-v1.7.0"; + reg = <0x00704000 0x20000>; + interrupts = ; + clocks = <&gcc GCC_CRYPTO_AHB_CLK>; + clock-names = "bam_clk"; + #dma-cells = <1>; + qcom,ee = <1>; + qcom,controlled-remotely; + status = "disabled"; + }; + + crypto: crypto@73a000 { + compatible = "qcom,crypto-v5.1"; + reg = <0x0073a000 0x20000>; + clocks = <&gcc GCC_CRYPTO_AHB_CLK>, + <&gcc GCC_CRYPTO_AXI_CLK>, + <&gcc GCC_CRYPTO_CLK>; + clock-names = "iface", "bus", "core"; + dmas = <&cryptobam 2>, <&cryptobam 3>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + restart@4ab000 { + compatible = "qcom,pshold"; + reg = <0x004ab000 0x4>; + }; + + tlmm: pinctrl@1000000 { + compatible = "qcom,mdm9607-pinctrl"; + reg = <0x01000000 0x300000>; + interrupts = ; + gpio-controller; + gpio-ranges = <&tlmm 0 0 80>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + + blsp1_uart3_default: blsp1-uart3-default { + /* TX, RX, CTS_N, RTS_N */ + pins = "gpio0", "gpio1", "gpio2", "gpio3"; + function = "blsp_uart3"; + drive-strength = <2>; + bias-disable; + }; + + blsp1_uart3_sleep: blsp1-uart3-sleep { + pins = "gpio0", "gpio1", "gpio2", "gpio3"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + blsp1_uart2_default: blsp1-uart2-default { + /* TX, RX */ + pins = "gpio4", "gpio5"; + function = "blsp_uart2"; + drive-strength = <2>; + bias-disable; + }; + + blsp1_uart2_sleep: blsp1-uart2-sleep { + pins = "gpio4", "gpio5"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + blsp1_i2c2_default: blsp1-i2c2-default { + pins = "gpio6", "gpio7"; + function = "blsp_i2c2"; + drive-strength = <2>; + bias-disable; + }; + + blsp1_i2c2_sleep: blsp1-i2c2-sleep { + pins = "gpio6", "gpio7"; + function = "blsp_i2c2"; + drive-strength = <2>; + bias-pull-down; + }; + + blsp1_uart5_default: blsp1-uart5-default { + /* TX, RX, CTS_N, RTS_N */ + pins = "gpio8", "gpio9", "gpio10", "gpio11"; + function = "blsp_uart5"; + drive-strength = <2>; + bias-disable; + }; + + blsp1_uart5_sleep: blsp1-uart5-sleep { + pins = "gpio8", "gpio9", "gpio10", "gpio11"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + can_reset_default: can-reset-default { + pins = "gpio11"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + + can_reset_sleep: can-reset-sleep { + pins = "gpio11"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + output-high; + }; + + blsp1_i2c4_default: blsp1-i2c4-default { + pins = "gpio18", "gpio19"; + function = "blsp_i2c4"; + drive-strength = <2>; + bias-disable; + }; + + blsp1_i2c4_sleep: blsp1-i2c4-sleep { + pins = "gpio18", "gpio19"; + function = "blsp_i2c4"; + drive-strength = <2>; + bias-pull-down; + }; + + blsp1_spi6_default: blsp1-spi6-default { + spi { + pins = "gpio20", "gpio21", "gpio23"; + function = "blsp_spi6"; + drive-strength = <12>; + bias-disable; + }; + + cs { + pins = "gpio22"; + function = "blsp_spi6"; + drive-strength = <2>; + bias-disable; + }; + }; + + blsp1_spi6_sleep: blsp1-spi6-sleep { + spi { + pins = "gpio20", "gpio21", "gpio23"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + cs { + pins = "gpio22"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + }; + + pmx_pri_mi2s_active: pri-mi2s-active { + ws { + pins = "gpio20"; + function = "pri_mi2s_ws_a"; + drive-strength = <8>; + bias-disable; + output-high; + }; + + din { + pins = "gpio21"; + function = "pri_mi2s_data0_a"; + drive-strength = <8>; + bias-disable; + }; + + dout { + pins = "gpio22"; + function = "pri_mi2s_data1_a"; + drive-strength = <8>; + bias-disable; + output-high; + }; + + sck { + pins = "gpio23"; + function = "pri_mi2s_sck_a"; + drive-strength = <8>; + bias-disable; + output-high; + }; + }; + + codec_reset_active: codec-reset-default { + pins = "gpio26"; + drive-strength = <8>; + bias-disable; + output-high; + }; + + codec_reset_sleep: codec-reset-sleep { + pins = "gpio26"; + drive-strength = <2>; + bias-pull-down; + }; + + ntn_rst_default: ntn-rst-default { + pins = "gpio30"; + drive-strength = <16>; + bias-pull-up; + output-high; + }; + + sleep_ind_active: sleep-ind-active { + pins = "gpio42"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + output-low; + }; + + sleep_ind_sleep: sleep-ind-sleep { + pins = "gpio42"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + output-high; + }; + + pps_gpio: pps-gpio-n { + pins = "gpio53"; + function = "nav_tsync_out_a"; + bias-pull-down; + }; + + sdc1_wlan_gpio_active: sdc1-wlan-gpio-active { + pins = "gpio54"; + function = "gpio"; + drive-strength = <8>; + bias-pull-up; + output-high; + }; + + sdc1_wlan_gpio_sleep: sdc1-wlan-gpio-sleep { + pins = "gpio54"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + output-low; + }; + + pmx_sec_mi2s_active: sec-mi2s-active { + din { + pins = "gpio76"; + function = "sec_mi2s"; + drive-strength = <8>; + bias-disable; + }; + + dout { + pins = "gpio77"; + function = "sec_mi2s"; + drive-strength = <8>; + bias-disable; + output-high; + }; + + sck { + pins = "gpio78"; + function = "sec_mi2s"; + drive-strength = <8>; + bias-disable; + output-high; + }; + + ws { + pins = "gpio79"; + function = "sec_mi2s"; + drive-strength = <8>; + bias-disable; + output-high; + }; + }; + }; + + gcc: clock-controller@1800000 { + compatible = "qcom,gcc-mdm9607"; + reg = <0x01800000 0x80000>; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + clock-names = "xo", + "sleep_clk"; + clocks = <&xo_board>, <&sleep_clk>; + + assigned-clocks = <&gcc APSS_AHB_CLK_SRC>, + <&gcc PCNOC_BFDCD_CLK_SRC>; + assigned-clock-rates = <19200000>, <50000000>; + }; + + tcsr_mutex: syscon@1905000 { + compatible = "qcom,tcsr-mutex"; + reg = <0x01905000 0x20000>; + #hwlock-cells = <1>; + }; + + tcsr: syscon@1937000 { + compatible = "qcom,tcsr-msm8916", "syscon"; + reg = <0x01937000 0x30000>; + }; + + spmi_bus: spmi@200f000 { + compatible = "qcom,spmi-pmic-arb"; + reg = <0x0200f000 0x001000>, + <0x02400000 0x800000>, + <0x02c00000 0x800000>, + <0x03800000 0x200000>, + <0x0200a000 0x002100>; + reg-names = "core", "chnls", "obsrvr", "intr", "cnfg"; + interrupt-names = "periph_irq"; + interrupts = ; + qcom,ee = <0>; + qcom,channel = <0>; + #address-cells = <2>; + #size-cells = <0>; + interrupt-controller; + #interrupt-cells = <4>; + }; + + blsp1_dma: dma-controller@7884000 { + compatible = "qcom,bam-v1.7.0"; + reg = <0x07884000 0x23000>; + interrupts = ; + clocks = <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "bam_clk"; + #dma-cells = <1>; + qcom,ee = <0>; + }; + + blsp1_uart2: serial@78b0000 { + compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; + reg = <0x078b0000 0x200>; + interrupts = ; + clocks = <&gcc GCC_BLSP1_UART2_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&blsp1_uart2_default>; + pinctrl-1 = <&blsp1_uart2_sleep>; + /* TODO: no explicit DMA? */ + status = "disabled"; + }; + + blsp1_uart3: serial@78b1000 { + compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; + reg = <0x078b1000 0x200>; + interrupts = ; + clocks = <&gcc GCC_BLSP1_UART3_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&blsp1_uart3_default>; + pinctrl-1 = <&blsp1_uart3_sleep>; + dmas = <&blsp1_dma 4>, <&blsp1_dma 5>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + blsp1_uart5: serial@78b3000 { + compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; + reg = <0x078b3000 0x200>; + interrupts = ; + clocks = <&gcc GCC_BLSP1_UART5_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&blsp1_uart5_default>; + pinctrl-1 = <&blsp1_uart5_sleep>; + dmas = <&blsp1_dma 8>, <&blsp1_dma 9>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + blsp1_i2c2: i2c@78b6000 { + compatible = "qcom,i2c-qup-v2.1.1"; + reg = <0x078b6000 0x600>; + interrupts = ; + clocks = <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + clock-frequency = <400000>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&blsp1_i2c2_default>; + pinctrl-1 = <&blsp1_i2c2_sleep>; + dmas = <&blsp1_dma 14>, <&blsp1_dma 15>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + blsp1_i2c4: i2c@78b8000 { + compatible = "qcom,i2c-qup-v2.1.1"; + reg = <0x078b8000 0x600>; + interrupts = ; + clocks = <&gcc GCC_BLSP1_QUP4_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + clock-frequency = <400000>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&blsp1_i2c4_default>; + pinctrl-1 = <&blsp1_i2c4_sleep>; + dmas = <&blsp1_dma 18>, <&blsp1_dma 19>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + blsp1_spi6: spi@78ba000 { + compatible = "qcom,spi-qup-v2.2.1"; + reg = <0x078ba000 0x600>; + interrupts = ; + clocks = <&gcc GCC_BLSP1_QUP6_SPI_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&blsp1_spi6_default>; + pinctrl-1 = <&blsp1_spi6_sleep>; + dmas = <&blsp1_dma 22>, <&blsp1_dma 23>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + usb: usb@78d9000 { + compatible = "qcom,ci-hdrc"; + reg = <0x078d9000 0x200>, + <0x078d9200 0x200>; + interrupts = , + ; + clocks = <&gcc GCC_USB_HS_AHB_CLK>, + <&gcc GCC_USB_HS_SYSTEM_CLK>; + clock-names = "iface", "core"; + assigned-clocks = <&gcc GCC_USB_HS_SYSTEM_CLK>; + assigned-clock-rates = <69500000>; + resets = <&gcc USB_HS_BCR>; + reset-names = "core"; + phy_type = "ulpi"; + /* We don't want the modem to be the boss. */ + dr_mode = "peripheral"; + hnp-disable; + srp-disable; + adp-disable; + ahb-burst-config = <0>; + phy-names = "usb-phy"; + phys = <&usb_hs_phy>; + status = "disabled"; + #reset-cells = <1>; + }; + + qpic_bam: dma-controller@7984000 { + compatible = "qcom,bam-v1.7.0"; + reg = <0x07984000 0x1a000>; + interrupts = ; + clocks = <&rpmcc RPM_SMD_QPIC_CLK>; + clock-names = "bam_clk"; + #dma-cells = <1>; + qcom,ee = <0>; + status = "disabled"; + }; + + qpic_nand: nand@79b0000 { + compatible = "qcom,ipq4019-nand"; + reg = <0x079b0000 0x10000>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&rpmcc RPM_SMD_QPIC_CLK>, <&nand_clk_dummy>; + clock-names = "core", "aon"; + + dmas = <&qpic_bam 0>, + <&qpic_bam 1>, + <&qpic_bam 2>; + dma-names = "tx", "rx", "cmd"; + status = "disabled"; + + nand: nand@0 { + reg = <0>; + + nand-ecc-strength = <4>; + nand-ecc-step-size = <512>; + nand-bus-width = <8>; + }; + }; + + imem: imem@8600000 { + compatible = "syscon", "simple-mfd"; + reg = <0x08600000 0x1000>; + + #address-cells = <1>; + #size-cells = <1>; + + reboot-mode@65c { + compatible = "syscon-reboot-mode"; + offset = <0x65c>; + }; + + pil-reloc@94c { + compatible = "qcom,pil-reloc-info"; + reg = <0x94c 0xc8>; + }; + }; + + intc: interrupt-controller@b000000 { + compatible = "qcom,msm-qgic2"; + interrupt-controller; + #interrupt-cells = <3>; + reg = <0x0b000000 0x1000>, + <0x0b002000 0x1000>; + }; + + /* + * Yeah.. about that.. MDM9607 seems to + * have 2 separate mailboxes: this one for + * the usual IPC things and the one above + * just for ARM frequency voting. + */ + apcs: syscon@b011000 { + compatible = "syscon"; + reg = <0x0b011000 0x1000>; + }; + + timer@b020000 { + compatible = "arm,armv7-timer-mem"; + reg = <0x0b020000 0x1000>; + clock-frequency = <19200000>; + + #address-cells = <1>; + #size-cells = <1>; + ranges; + frame@b021000 { + frame-number = <0>; + interrupts = , + ; + reg = <0x0b021000 0x1000>, + <0x0b022000 0x1000>; + }; + frame@b023000 { + frame-number = <1>; + interrupts = ; + reg = <0x0b023000 0x1000>; + status = "disabled"; + }; + frame@b024000 { + frame-number = <2>; + interrupts = ; + reg = <0x0b024000 0x1000>; + status = "disabled"; + }; + frame@b025000 { + frame-number = <3>; + interrupts = ; + reg = <0x0b025000 0x1000>; + status = "disabled"; + }; + frame@b026000 { + frame-number = <4>; + interrupts = ; + reg = <0x0b026000 0x1000>; + status = "disabled"; + }; + frame@b027000 { + frame-number = <5>; + interrupts = ; + reg = <0x0b027000 0x1000>; + status = "disabled"; + }; + frame@b028000 { + frame-number = <6>; + interrupts = ; + reg = <0x0b028000 0x1000>; + status = "disabled"; + }; + frame@b029000 { + frame-number = <7>; + interrupts = ; + reg = <0x0b029000 0x1000>; + status = "disabled"; + }; + }; + }; + + smp2p-modem { + compatible = "qcom,smp2p"; + qcom,smem = <435>, <428>; + + interrupt-parent = <&intc>; + interrupts = ; + + qcom,ipc = <&apcs 8 14>; + + qcom,local-pid = <0>; + qcom,remote-pid = <1>; + + modem_smp2p_out: master-kernel { + qcom,entry-name = "master-kernel"; + #qcom,smem-state-cells = <1>; + }; + + modem_smp2p_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + smsm { + compatible = "qcom,smsm"; + + #address-cells = <1>; + #size-cells = <0>; + + qcom,ipc-1 = <&apcs 8 13>; + + apps_smsm: apps@0 { + reg = <0>; + + #qcom,smem-state-cells = <1>; + }; + + modem_smsm: modem@1 { + reg = <1>; + interrupts = ; + + interrupt-controller; + #interrupt-cells = <2>; + }; + }; +}; diff --git a/arch/arm/boot/dts/qcom-pm8019.dtsi b/arch/arm/boot/dts/qcom-pm8019.dtsi new file mode 100644 index 000000000000..0827d06a1f75 --- /dev/null +++ b/arch/arm/boot/dts/qcom-pm8019.dtsi @@ -0,0 +1,100 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2021, Konrad Dybcio + */ +#include +#include +#include + +&spmi_bus { + + pm8019_0: pmic@0 { + compatible = "qcom,pm8019", "qcom,spmi-pmic"; + reg = <0x0 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + pm8019_vadc: adc@3100 { + compatible = "qcom,spmi-vadc"; + reg = <0x3100>; + interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>; + #address-cells = <1>; + #size-cells = <0>; + #io-channel-cells = <1>; + + adc-chan@0 { + reg = ; + qcom,pre-scaling = <1 10>; + }; + adc-chan@7 { + reg = ; + qcom,pre-scaling = <1 3>; + }; + adc-chan@8 { + reg = ; + }; + adc-chan@9 { + reg = ; + }; + adc-chan@a { + reg = ; + }; + adc-chan@e { + reg = ; + }; + adc-chan@f { + reg = ; + }; + }; + + rtc@6000 { + compatible = "qcom,pm8941-rtc"; + reg = <0x6000>; + reg-names = "rtc", "alarm"; + interrupts = <0x0 0x61 0x1 IRQ_TYPE_EDGE_RISING>; + }; + + pm8019_mpps: mpps@a000 { + compatible = "qcom,pm8019-mpp"; + reg = <0xa000>; + gpio-controller; + #gpio-cells = <2>; + interrupts = <0 0xa0 0 IRQ_TYPE_NONE>, + <0 0xa1 0 IRQ_TYPE_NONE>, + <0 0xa2 0 IRQ_TYPE_NONE>, + <0 0xa3 0 IRQ_TYPE_NONE>, + <0 0xa4 0 IRQ_TYPE_NONE>, + <0 0xa5 0 IRQ_TYPE_NONE>; + }; + + pm8019_gpios: gpios@c000 { + compatible = "qcom,pm8019-gpio"; + reg = <0xc000>; + gpio-controller; + #gpio-cells = <2>; + interrupts = <0 0xc0 0 IRQ_TYPE_NONE>, + <0 0xc1 0 IRQ_TYPE_NONE>, + <0 0xc2 0 IRQ_TYPE_NONE>, + <0 0xc3 0 IRQ_TYPE_NONE>, + <0 0xc4 0 IRQ_TYPE_NONE>, + <0 0xc5 0 IRQ_TYPE_NONE>; + }; + }; + + pm8019_1: pmic@1 { + compatible = "qcom,pm8019", "qcom,spmi-pmic"; + reg = <0x1 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + pm8019_vib: vibrator@c000 { + compatible = "qcom,pm8916-vib"; + reg = <0xc000>; + status = "disabled"; + }; + + pm8019_spmi_regulators: regulators { + compatible = "qcom,pm8019-regulators"; + }; + }; +};