From patchwork Tue Oct 5 15:24:51 2021 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Amelie Delaunay X-Patchwork-Id: 12537071 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from mail.kernel.org (mail.kernel.org [198.145.29.99]) by smtp.lore.kernel.org (Postfix) with ESMTP id F4229C433EF for ; Tue, 5 Oct 2021 15:25:07 +0000 (UTC) Received: from bombadil.infradead.org (bombadil.infradead.org [198.137.202.133]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by mail.kernel.org (Postfix) with ESMTPS id ABBCE61507 for ; Tue, 5 Oct 2021 15:25:07 +0000 (UTC) DMARC-Filter: OpenDMARC Filter v1.4.1 mail.kernel.org ABBCE61507 Authentication-Results: mail.kernel.org; dmarc=fail (p=none dis=none) header.from=foss.st.com Authentication-Results: mail.kernel.org; spf=none smtp.mailfrom=lists.infradead.org DKIM-Signature: v=1; a=rsa-sha256; q=dns/txt; c=relaxed/relaxed; d=lists.infradead.org; s=bombadil.20210309; h=Sender: Content-Transfer-Encoding:Content-Type:List-Subscribe:List-Help:List-Post: List-Archive:List-Unsubscribe:List-Id:MIME-Version:References:In-Reply-To: Message-ID:Date:Subject:CC:To:From:Reply-To:Content-ID:Content-Description: Resent-Date:Resent-From:Resent-Sender:Resent-To:Resent-Cc:Resent-Message-ID: List-Owner; bh=CGmqRGGqIW4tiK/8pJUiVYvSIQbmCWF3LJEPJhVm5ek=; b=oPV++Xfe7gmywT KuJSMo+eo8VfjGo2owaTEqjgfyuWZLQPLFH+HzGcTTtXlRJGu7KxsP92ODauj5XhNJDm82gFcX6Xb I1fK4kyoVbS3J38D8rT4OBi5qpBgaj5BeSZMoz5O8q96fqPOcYic7BoncvhVD/HKHkxmAD+K0MO2A aZFRgdcBfkhSXNNPSYEN12DjL/sFeBWJiueHHE6V0mOJJZDHHH23wTJXC1dlwqzhbHYtI7MNheKmS OtQw61UBj+yZSEO0/TTWBob27wCTNqZtK75HDAZ5ozCLvN9yGRHWiWwCUUfXzFQkWyncJi5XKUZqO W4Vf2tivYnMzibrUDSqg==; Received: from localhost ([::1] helo=bombadil.infradead.org) by bombadil.infradead.org with esmtp (Exim 4.94.2 #2 (Red Hat Linux)) id 1mXmJX-00B3fc-8R; Tue, 05 Oct 2021 15:25:07 +0000 Received: from mx07-00178001.pphosted.com ([185.132.182.106]) by bombadil.infradead.org with esmtps (Exim 4.94.2 #2 (Red Hat Linux)) id 1mXmJU-00B3co-Az; Tue, 05 Oct 2021 15:25:05 +0000 Received: from pps.filterd (m0241204.ppops.net [127.0.0.1]) by mx07-00178001.pphosted.com (8.16.1.2/8.16.1.2) with SMTP id 195EWBAu032067; Tue, 5 Oct 2021 17:24:58 +0200 DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=foss.st.com; h=from : to : cc : subject : date : message-id : in-reply-to : references : mime-version : content-transfer-encoding : content-type; s=selector1; bh=AZCLz9Qu7aCsRJuQKx+MRmvklKYmjkNGSFeQSH6HK7E=; b=ySkPwUjypRwcWCriNC5MwLz0XsGnG0+Xq0ETrBHTUEzEtdgUJU9Z7VFIgVg7eq5PefZS Jar5OJKPqYkb1Kil/8HtuUpYsYXMeML8/ZEwcCQ56/nvbQSpMEnQfOXauUPFmFH/+WXM mn/kmCzjZoWK5EvfUDpxL4sDgAQbsCo1AiNnKjuaGceOv9jEN7YlVWCbytVNCVPrH/qY gWA5PdKU90JScZ5gXcbptDYu9jkdkzXYJ0Dz1uEPktXyFfVuMl//Owt1zH2+eE5+KoKZ 2sdayDdu4t0Jp7a4qLuhKp65NzzIrnwI/tf7tSWgnbmpfZD62S9iCR/ScPY+neTvYyh/ 2A== Received: from beta.dmz-eu.st.com (beta.dmz-eu.st.com [164.129.1.35]) by mx07-00178001.pphosted.com with ESMTP id 3bgdt9uynk-1 (version=TLSv1.2 cipher=ECDHE-RSA-AES256-GCM-SHA384 bits=256 verify=NOT); Tue, 05 Oct 2021 17:24:58 +0200 Received: from euls16034.sgp.st.com (euls16034.sgp.st.com [10.75.44.20]) by beta.dmz-eu.st.com (STMicroelectronics) with ESMTP id A3DAF100034; Tue, 5 Oct 2021 17:24:57 +0200 (CEST) Received: from Webmail-eu.st.com (sfhdag2node2.st.com [10.75.127.5]) by euls16034.sgp.st.com (STMicroelectronics) with ESMTP id 9BF5C229A8E; Tue, 5 Oct 2021 17:24:57 +0200 (CEST) Received: from localhost (10.75.127.45) by SFHDAG2NODE2.st.com (10.75.127.5) with Microsoft SMTP Server (TLS) id 15.0.1497.18; Tue, 5 Oct 2021 17:24:56 +0200 From: Amelie Delaunay To: Kishon Vijay Abraham I , Vinod Koul , Rob Herring , Alexandre Torgue , Maxime Coquelin CC: , , , , , Amelie Delaunay Subject: [PATCH v2 1/3] phy: stm32: restore utmi switch on resume Date: Tue, 5 Oct 2021 17:24:51 +0200 Message-ID: <20211005152453.89330-2-amelie.delaunay@foss.st.com> X-Mailer: git-send-email 2.25.1 In-Reply-To: <20211005152453.89330-1-amelie.delaunay@foss.st.com> References: <20211005152453.89330-1-amelie.delaunay@foss.st.com> MIME-Version: 1.0 X-Originating-IP: [10.75.127.45] X-ClientProxiedBy: SFHDAG1NODE3.st.com (10.75.127.3) To SFHDAG2NODE2.st.com (10.75.127.5) X-Proofpoint-Virus-Version: vendor=baseguard engine=ICAP:2.0.182.1,Aquarius:18.0.790,Hydra:6.0.391,FMLib:17.0.607.475 definitions=2021-10-05_02,2021-10-04_01,2020-04-07_01 X-CRM114-Version: 20100106-BlameMichelson ( TRE 0.8.0 (BSD) ) MR-646709E3 X-CRM114-CacheID: sfid-20211005_082504_717631_4664952E X-CRM114-Status: GOOD ( 18.22 ) X-BeenThere: linux-phy@lists.infradead.org X-Mailman-Version: 2.1.34 Precedence: list List-Id: Linux Phy Mailing list List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: "linux-phy" Errors-To: linux-phy-bounces+linux-phy=archiver.kernel.org@lists.infradead.org UTMI switch value can be lost during suspend/resume, depending on the power state reached. This patch adds resume function to usbphyc, to reconfigure utmi switch after suspend. Signed-off-by: Amelie Delaunay --- drivers/phy/st/phy-stm32-usbphyc.c | 13 +++++++++++++ 1 file changed, 13 insertions(+) diff --git a/drivers/phy/st/phy-stm32-usbphyc.c b/drivers/phy/st/phy-stm32-usbphyc.c index 937a14fa7448..083593aea53a 100644 --- a/drivers/phy/st/phy-stm32-usbphyc.c +++ b/drivers/phy/st/phy-stm32-usbphyc.c @@ -598,6 +598,18 @@ static int stm32_usbphyc_remove(struct platform_device *pdev) return 0; } +static int __maybe_unused stm32_usbphyc_resume(struct device *dev) +{ + struct stm32_usbphyc *usbphyc = dev_get_drvdata(dev); + + if (usbphyc->switch_setup >= 0) + stm32_usbphyc_switch_setup(usbphyc, usbphyc->switch_setup); + + return 0; +} + +static SIMPLE_DEV_PM_OPS(stm32_usbphyc_pm_ops, NULL, stm32_usbphyc_resume); + static const struct of_device_id stm32_usbphyc_of_match[] = { { .compatible = "st,stm32mp1-usbphyc", }, { }, @@ -610,6 +622,7 @@ static struct platform_driver stm32_usbphyc_driver = { .driver = { .of_match_table = stm32_usbphyc_of_match, .name = "stm32-usbphyc", + .pm = &stm32_usbphyc_pm_ops, } }; module_platform_driver(stm32_usbphyc_driver); From patchwork Tue Oct 5 15:24:52 2021 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Amelie Delaunay X-Patchwork-Id: 12537077 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from mail.kernel.org (mail.kernel.org [198.145.29.99]) by smtp.lore.kernel.org (Postfix) with ESMTP id 87EC2C433EF for ; Tue, 5 Oct 2021 15:25:46 +0000 (UTC) Received: from bombadil.infradead.org (bombadil.infradead.org [198.137.202.133]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by mail.kernel.org (Postfix) with ESMTPS id 5105461502 for ; Tue, 5 Oct 2021 15:25:46 +0000 (UTC) DMARC-Filter: OpenDMARC Filter v1.4.1 mail.kernel.org 5105461502 Authentication-Results: mail.kernel.org; dmarc=fail (p=none dis=none) header.from=foss.st.com Authentication-Results: mail.kernel.org; spf=none smtp.mailfrom=lists.infradead.org DKIM-Signature: v=1; a=rsa-sha256; q=dns/txt; c=relaxed/relaxed; d=lists.infradead.org; s=bombadil.20210309; h=Sender: Content-Transfer-Encoding:Content-Type:List-Subscribe:List-Help:List-Post: List-Archive:List-Unsubscribe:List-Id:MIME-Version:References:In-Reply-To: Message-ID:Date:Subject:CC:To:From:Reply-To:Content-ID:Content-Description: Resent-Date:Resent-From:Resent-Sender:Resent-To:Resent-Cc:Resent-Message-ID: List-Owner; bh=gUfFgfLrbMBiwQ1RZiwN20Tc20E9MfcND3JKLdhypX0=; b=KAyF3dKL3dyxxE 2QUhopnEgnBmbydf+5YAiswgafT6HVcyHrochEi8tkZQGb8A5nzXwsYUMn+XPoJPPygXb+f94J0CX 5K1KggX5thSM51f58Zb4RXicvuG6eUfUX4WUsxw7RTaYDkml6z/JJyIkoGhlf+XqOSGuMqoYSVGas NvnXpr/6u2OnJ/JIC3Rutf4khdiHPuzFXhm4/9qyFjyDK93CU0j9VdM7IxG9lbhfToFAfM+3epuaZ fRWW2kirXDwySPNiY1cRyUopPeGe+RbHkJr1Ne97nLtGAiO0EOzIY/ImTaKuVsfah+FA/ifYSKnoC y4M+EljWn8sBFyCNcx1A==; Received: from localhost ([::1] helo=bombadil.infradead.org) by bombadil.infradead.org with esmtp (Exim 4.94.2 #2 (Red Hat Linux)) id 1mXmK9-00B3t3-QZ; Tue, 05 Oct 2021 15:25:45 +0000 Received: from mx08-00178001.pphosted.com ([91.207.212.93] helo=mx07-00178001.pphosted.com) by bombadil.infradead.org with esmtps (Exim 4.94.2 #2 (Red Hat Linux)) id 1mXmJW-00B3da-EX; Tue, 05 Oct 2021 15:25:08 +0000 Received: from pps.filterd (m0046660.ppops.net [127.0.0.1]) by mx07-00178001.pphosted.com (8.16.1.2/8.16.1.2) with SMTP id 195DlYcI026071; Tue, 5 Oct 2021 17:24:59 +0200 DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=foss.st.com; h=from : to : cc : subject : date : message-id : in-reply-to : references : mime-version : content-transfer-encoding : content-type; s=selector1; bh=bZUc4fpK5WkSy+znG167urc9Z7gd4EvGuzPnXsKxCzY=; b=a8ko3TaPm4dy7gnuPLfVdAPOnpzul9VzGF5tvUnV4S0+2pLcsqlwKLuCR2IF2lCwueCc +H4jZzIazyR3isNsvuVfYlTnXF1k+Ba7LfYrRmHVayYz5Q6Q2EeIuryjrmOF1JN+MPtM SOoHdXt/olAE6ogT7OjOBFztTYqflEZr3ge3rMEetL2iJozFv6kYSm0cq2nl+bHe4ZiX Zz8qRnwaMDUK661m8PBBEwtGFmyhS5ZLdA3OO+cQZG+5e40o+lqJNzZqaLy0mY5Wn5t2 6n6Ge1c3NcABbTKjMtuGoTtG7RORK64HojHC4yEx6lXEjTlhm59cee8PPR3WdxYm8cFX hw== Received: from beta.dmz-eu.st.com (beta.dmz-eu.st.com [164.129.1.35]) by mx07-00178001.pphosted.com with ESMTP id 3bgjv12f9b-1 (version=TLSv1.2 cipher=ECDHE-RSA-AES256-GCM-SHA384 bits=256 verify=NOT); Tue, 05 Oct 2021 17:24:59 +0200 Received: from euls16034.sgp.st.com (euls16034.sgp.st.com [10.75.44.20]) by beta.dmz-eu.st.com (STMicroelectronics) with ESMTP id C60CE10002A; Tue, 5 Oct 2021 17:24:58 +0200 (CEST) Received: from Webmail-eu.st.com (sfhdag2node2.st.com [10.75.127.5]) by euls16034.sgp.st.com (STMicroelectronics) with ESMTP id BD1E7229A8E; Tue, 5 Oct 2021 17:24:58 +0200 (CEST) Received: from localhost (10.75.127.46) by SFHDAG2NODE2.st.com (10.75.127.5) with Microsoft SMTP Server (TLS) id 15.0.1497.18; Tue, 5 Oct 2021 17:24:58 +0200 From: Amelie Delaunay To: Kishon Vijay Abraham I , Vinod Koul , Rob Herring , Alexandre Torgue , Maxime Coquelin CC: , , , , , Amelie Delaunay Subject: [PATCH v2 2/3] dt-bindings: phy: phy-stm32-usbphyc: add optional phy tuning properties Date: Tue, 5 Oct 2021 17:24:52 +0200 Message-ID: <20211005152453.89330-3-amelie.delaunay@foss.st.com> X-Mailer: git-send-email 2.25.1 In-Reply-To: <20211005152453.89330-1-amelie.delaunay@foss.st.com> References: <20211005152453.89330-1-amelie.delaunay@foss.st.com> MIME-Version: 1.0 X-Originating-IP: [10.75.127.46] X-ClientProxiedBy: SFHDAG1NODE3.st.com (10.75.127.3) To SFHDAG2NODE2.st.com (10.75.127.5) X-Proofpoint-Virus-Version: vendor=baseguard engine=ICAP:2.0.182.1,Aquarius:18.0.790,Hydra:6.0.391,FMLib:17.0.607.475 definitions=2021-10-05_02,2021-10-04_01,2020-04-07_01 X-CRM114-Version: 20100106-BlameMichelson ( TRE 0.8.0 (BSD) ) MR-646709E3 X-CRM114-CacheID: sfid-20211005_082506_798561_6DE7EBBF X-CRM114-Status: GOOD ( 17.74 ) X-BeenThere: linux-phy@lists.infradead.org X-Mailman-Version: 2.1.34 Precedence: list List-Id: Linux Phy Mailing list List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: "linux-phy" Errors-To: linux-phy-bounces+linux-phy=archiver.kernel.org@lists.infradead.org This patch adds the description of new optional phy tuning properties for usbphyc phy sub nodes. Signed-off-by: Amelie Delaunay --- Changes in v2: - st,phy-tuning property removed - tuning properties are now put directly in each child node - tuning properties are no more free form text and their name reworked --- .../bindings/phy/phy-stm32-usbphyc.yaml | 126 ++++++++++++++++++ 1 file changed, 126 insertions(+) diff --git a/Documentation/devicetree/bindings/phy/phy-stm32-usbphyc.yaml b/Documentation/devicetree/bindings/phy/phy-stm32-usbphyc.yaml index 3329f1d33a4f..c0f4dff2b8cb 100644 --- a/Documentation/devicetree/bindings/phy/phy-stm32-usbphyc.yaml +++ b/Documentation/devicetree/bindings/phy/phy-stm32-usbphyc.yaml @@ -81,6 +81,116 @@ patternProperties: properties: vbus-supply: true + # It can be necessary to adjust the PHY settings to compensate parasitics, which can be due + # to USB connector/receptacle, routing, ESD protection component,... Here is the list of + # all optional parameters to tune the interface of the PHY (HS for High-Speed, FS for Full- + # Speed, LS for Low-Speed) + + st,current-boost-milliamp: + description: Current boosting in mA + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 1 + maximum: 2 + + st,no-lsfs-fb-cap: + description: Disables the LS/FS feedback capacitor + type: boolean + + st,decrease-hs-slew-rate: + description: Decreases the HS driver slew rate by 10% + type: boolean + + st,tune-hs-dc-level: + description: Tunes the HS driver DC level + - <0> normal level + - <1> increases the level by 5 to 7 mV + - <2> increases the level by 10 to 14 mV + - <3> decreases the level by 5 to 7 mV + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 3 + default: 0 + + st,enable-fs-rftime-tuning: + description: Enables the FS rise/fall tuning option + type: boolean + + st,enable-hs-rftime-reduction: + description: Enables the HS rise/fall reduction feature + type: boolean + + st,trim-hs-current: + description: Controls HS driver current trimming for choke compensation + - <0> = 18.87 mA target current / nominal + 0% + - <1> = 19.165 mA target current / nominal + 1.56% + - <2> = 19.46 mA target current / nominal + 3.12% + - <3> = 19.755 mA target current / nominal + 4.68% + - <4> = 20.05 mA target current / nominal + 6.24% + - <5> = 20.345 mA target current / nominal + 7.8% + - <6> = 20.64 mA target current / nominal + 9.36% + - <7> = 20.935 mA target current / nominal + 10.92% + - <8> = 21.23 mA target current / nominal + 12.48% + - <9> = 21.525 mA target current / nominal + 14.04% + - <10> = 21.82 mA target current / nominal + 15.6% + - <11> = 22.115 mA target current / nominal + 17.16% + - <12> = 22.458 mA target current / nominal + 19.01% + - <13> = 22.755 mA target current / nominal + 20.58% + - <14> = 23.052 mA target current / nominal + 22.16% + - <15> = 23.348 mA target current / nominal + 23.73% + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 15 + default: 0 + + st,trim-hs-impedance: + description: Controls HS driver impedance tuning for choke compensation + - <0> = no impedance offset + - <1> = reduce the impedance by 2 ohms + - <2> = reduce the impedance by 4 ohms + - <3> = reduce the impedance by 6 ohms + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 3 + default: 0 + + st,tune-squelch-level: + description: Tunes the squelch DC threshold value + - <0> = no shift in threshold + - <1> = threshold shift by +7 mV + - <2> = threshold shift by -5 mV + - <3> = threshold shift by +14 mV + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 3 + default: 0 + + st,enable-hs-rx-gain-eq: + description: Enables the HS Rx gain equalizer + type: boolean + + st,tune-hs-rx-offset: + description: Adjusts the HS Rx offset + - <0> = no offset + - <1> = offset of +5 mV + - <2> = offset of +10 mV + - <3> = offset of -5 mV + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 3 + default: 0 + + st,no-hs-ftime-ctrl: + description: Disables the HS fall time control of single ended signals during pre-emphasis + type: boolean + + st,no-lsfs-sc: + description: Disables the short circuit protection in LS/FS driver + type: boolean + + st,enable-hs-tx-staggering: + description: Enables the basic staggering in HS Tx mode + type: boolean + allOf: - if: properties: @@ -137,6 +247,14 @@ examples: reg = <0>; phy-supply = <&vdd_usb>; #phy-cells = <0>; + st,tune-hs-dc-level = <2>; + st,enable-fs-rftime-tuning; + st,enable-hs-rftime-reduction; + st,trim-hs-current = <15>; + st,trim-hs-impedance = <1>; + st,tune-squelch-level = <3>; + st,tune-hs-rx-offset = <2>; + st,no-lsfs-sc; connector { compatible = "usb-a-connector"; vbus-supply = <&vbus_sw>; @@ -147,6 +265,14 @@ examples: reg = <1>; phy-supply = <&vdd_usb>; #phy-cells = <1>; + st,tune-hs-dc-level = <2>; + st,enable-fs-rftime-tuning; + st,enable-hs-rftime-reduction; + st,trim-hs-current = <15>; + st,trim-hs-impedance = <1>; + st,tune-squelch-level = <3>; + st,tune-hs-rx-offset = <2>; + st,no-lsfs-sc; }; }; ... From patchwork Tue Oct 5 15:24:53 2021 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Amelie Delaunay X-Patchwork-Id: 12537075 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from mail.kernel.org (mail.kernel.org [198.145.29.99]) by smtp.lore.kernel.org (Postfix) with ESMTP id 8235BC433F5 for ; Tue, 5 Oct 2021 15:25:34 +0000 (UTC) Received: from bombadil.infradead.org (bombadil.infradead.org [198.137.202.133]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by mail.kernel.org (Postfix) with ESMTPS id 4C48761502 for ; Tue, 5 Oct 2021 15:25:34 +0000 (UTC) DMARC-Filter: OpenDMARC Filter v1.4.1 mail.kernel.org 4C48761502 Authentication-Results: mail.kernel.org; dmarc=fail (p=none dis=none) header.from=foss.st.com Authentication-Results: mail.kernel.org; spf=none smtp.mailfrom=lists.infradead.org DKIM-Signature: v=1; a=rsa-sha256; q=dns/txt; c=relaxed/relaxed; d=lists.infradead.org; s=bombadil.20210309; h=Sender: Content-Transfer-Encoding:Content-Type:List-Subscribe:List-Help:List-Post: List-Archive:List-Unsubscribe:List-Id:MIME-Version:References:In-Reply-To: Message-ID:Date:Subject:CC:To:From:Reply-To:Content-ID:Content-Description: Resent-Date:Resent-From:Resent-Sender:Resent-To:Resent-Cc:Resent-Message-ID: List-Owner; bh=HzdhzQ5tnS2yQFUihRLFOus8SPQVmyf1gXK2eChJgYQ=; b=TvcWV5UOasVPaO i8huJUTYs6fnX97F54kGKgrlDnQc19rVDxS8j7e+O/7yLyR00cB0iwUf1KcHujVowBwcFoLUrGWNg hz+AXS5nQlrLuXbCjxIwb57H8GuhIrRHgFpBSBgAy/oN9TBBitmtH6Joc8SJ03ddsEpiXXy+ecmM+ l8BYs5C7bozn+GK7jrn70g8ON0q6iOvR+fctZWXNItstYBG814Fasu4WLFi2un2N57nJdnZFqSBPG 9zIpXFb8Km/xSRVns7TNC2IdsgdP+mWydFi+EJG8Oxp/cdeLreau17r+ZiK9scKppqC6fz0yUGYVF N7idx06qA3DRJKdgDLgQ==; Received: from localhost ([::1] helo=bombadil.infradead.org) by bombadil.infradead.org with esmtp (Exim 4.94.2 #2 (Red Hat Linux)) id 1mXmJx-00B3ov-RD; Tue, 05 Oct 2021 15:25:33 +0000 Received: from mx07-00178001.pphosted.com ([185.132.182.106]) by bombadil.infradead.org with esmtps (Exim 4.94.2 #2 (Red Hat Linux)) id 1mXmJU-00B3db-To; Tue, 05 Oct 2021 15:25:07 +0000 Received: from pps.filterd (m0241204.ppops.net [127.0.0.1]) by mx07-00178001.pphosted.com (8.16.1.2/8.16.1.2) with SMTP id 195ET843032075; Tue, 5 Oct 2021 17:25:00 +0200 DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=foss.st.com; h=from : to : cc : subject : date : message-id : in-reply-to : references : mime-version : content-transfer-encoding : content-type; s=selector1; bh=PwEsk8zkmrpfizXyeItl/I5+19zlgjGxG1q8uuURRE4=; b=5WazbKLXqEaGt+el7ke8Hkk+V00m9LqS06Bmql3KujxBssoa7gIF42LyjEFKqOfgnxnQ em0X/Kb5foHSSBJI4zZdVAL6lzQO8rGZGaIGGK5WLE4hDB28HpwTneTwZM6tLzFnQSBU cMMYau4/0+wKcsFAMSGKE6KcVgYdrGVrVAm1+PfYUNjR098Bledf16UPRaqBJqyWqaKu amSUDsK56l4nvofa5DPh9ABGv5HIUeOSKtzfXeC8pbzPuWwPltRhZuMmYmdsTMUhXcEd tnfhtm3c2ZCeMCyiAD37JzpA3FhQ+KxFh5OaqxMbjHiWsawF8gaFb2enTqHu1WbEtuox mQ== Received: from beta.dmz-eu.st.com (beta.dmz-eu.st.com [164.129.1.35]) by mx07-00178001.pphosted.com with ESMTP id 3bgdt9uynv-1 (version=TLSv1.2 cipher=ECDHE-RSA-AES256-GCM-SHA384 bits=256 verify=NOT); Tue, 05 Oct 2021 17:25:00 +0200 Received: from euls16034.sgp.st.com (euls16034.sgp.st.com [10.75.44.20]) by beta.dmz-eu.st.com (STMicroelectronics) with ESMTP id 0CB6610002A; Tue, 5 Oct 2021 17:25:00 +0200 (CEST) Received: from Webmail-eu.st.com (sfhdag2node2.st.com [10.75.127.5]) by euls16034.sgp.st.com (STMicroelectronics) with ESMTP id F0DF6229A8E; Tue, 5 Oct 2021 17:24:59 +0200 (CEST) Received: from localhost (10.75.127.46) by SFHDAG2NODE2.st.com (10.75.127.5) with Microsoft SMTP Server (TLS) id 15.0.1497.18; Tue, 5 Oct 2021 17:24:59 +0200 From: Amelie Delaunay To: Kishon Vijay Abraham I , Vinod Koul , Rob Herring , Alexandre Torgue , Maxime Coquelin CC: , , , , , Amelie Delaunay Subject: [PATCH v2 3/3] phy: stm32: add phy tuning support Date: Tue, 5 Oct 2021 17:24:53 +0200 Message-ID: <20211005152453.89330-4-amelie.delaunay@foss.st.com> X-Mailer: git-send-email 2.25.1 In-Reply-To: <20211005152453.89330-1-amelie.delaunay@foss.st.com> References: <20211005152453.89330-1-amelie.delaunay@foss.st.com> MIME-Version: 1.0 X-Originating-IP: [10.75.127.46] X-ClientProxiedBy: SFHDAG1NODE3.st.com (10.75.127.3) To SFHDAG2NODE2.st.com (10.75.127.5) X-Proofpoint-Virus-Version: vendor=baseguard engine=ICAP:2.0.182.1,Aquarius:18.0.790,Hydra:6.0.391,FMLib:17.0.607.475 definitions=2021-10-05_02,2021-10-04_01,2020-04-07_01 X-CRM114-Version: 20100106-BlameMichelson ( TRE 0.8.0 (BSD) ) MR-646709E3 X-CRM114-CacheID: sfid-20211005_082505_302507_4654ED68 X-CRM114-Status: GOOD ( 23.61 ) X-BeenThere: linux-phy@lists.infradead.org X-Mailman-Version: 2.1.34 Precedence: list List-Id: Linux Phy Mailing list List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: "linux-phy" Errors-To: linux-phy-bounces+linux-phy=archiver.kernel.org@lists.infradead.org It can be necessary to adjust the phys settings to compensate parasitics. This patch adds support of new optional properties to configure the tune interface of the phys of stm32-usbphyc. Properties are optional, that's why each property is skipped if not found (-EINVAL). Phy tuning is restored on resume because if deep low power state is achieved, phy tuning configuration is reset. Signed-off-by: Amelie Delaunay --- drivers/phy/st/phy-stm32-usbphyc.c | 191 +++++++++++++++++++++++++++++ 1 file changed, 191 insertions(+) diff --git a/drivers/phy/st/phy-stm32-usbphyc.c b/drivers/phy/st/phy-stm32-usbphyc.c index 083593aea53a..238c4c8d4a15 100644 --- a/drivers/phy/st/phy-stm32-usbphyc.c +++ b/drivers/phy/st/phy-stm32-usbphyc.c @@ -20,6 +20,7 @@ #define STM32_USBPHYC_PLL 0x0 #define STM32_USBPHYC_MISC 0x8 #define STM32_USBPHYC_MONITOR(X) (0x108 + ((X) * 0x100)) +#define STM32_USBPHYC_TUNE(X) (0x10C + ((X) * 0x100)) #define STM32_USBPHYC_VERSION 0x3F4 /* STM32_USBPHYC_PLL bit fields */ @@ -41,6 +42,84 @@ #define STM32_USBPHYC_MON_SEL_LOCKP 0x1F #define STM32_USBPHYC_MON_OUT_LOCKP BIT(3) +/* STM32_USBPHYC_TUNE bit fields */ +#define INCURREN BIT(0) +#define INCURRINT BIT(1) +#define LFSCAPEN BIT(2) +#define HSDRVSLEW BIT(3) +#define HSDRVDCCUR BIT(4) +#define HSDRVDCLEV BIT(5) +#define HSDRVCURINCR BIT(6) +#define FSDRVRFADJ BIT(7) +#define HSDRVRFRED BIT(8) +#define HSDRVCHKITRM GENMASK(12, 9) +#define HSDRVCHKZTRM GENMASK(14, 13) +#define OTPCOMP GENMASK(19, 15) +#define SQLCHCTL GENMASK(21, 20) +#define HDRXGNEQEN BIT(22) +#define HSRXOFF GENMASK(24, 23) +#define HSFALLPREEM BIT(25) +#define SHTCCTCTLPROT BIT(26) +#define STAGSEL BIT(27) + +enum boosting_vals { + BOOST_1_MA = 1, + BOOST_2_MA, + BOOST_MAX, +}; + +enum dc_level_vals { + DC_NOMINAL, + DC_PLUS_5_TO_7_MV, + DC_PLUS_10_TO_14_MV, + DC_MINUS_5_TO_7_MV, + DC_MAX, +}; + +enum current_trim { + CUR_NOMINAL, + CUR_PLUS_1_56_PCT, + CUR_PLUS_3_12_PCT, + CUR_PLUS_4_68_PCT, + CUR_PLUS_6_24_PCT, + CUR_PLUS_7_8_PCT, + CUR_PLUS_9_36_PCT, + CUR_PLUS_10_92_PCT, + CUR_PLUS_12_48_PCT, + CUR_PLUS_14_04_PCT, + CUR_PLUS_15_6_PCT, + CUR_PLUS_17_16_PCT, + CUR_PLUS_19_01_PCT, + CUR_PLUS_20_58_PCT, + CUR_PLUS_22_16_PCT, + CUR_PLUS_23_73_PCT, + CUR_MAX, +}; + +enum impedance_trim { + IMP_NOMINAL, + IMP_MINUS_2_OHMS, + IMP_MINUS_4_OMHS, + IMP_MINUS_6_OHMS, + IMP_MAX, +}; + +enum squelch_level { + SQLCH_NOMINAL, + SQLCH_PLUS_7_MV, + SQLCH_MINUS_5_MV, + SQLCH_PLUS_14_MV, + SQLCH_MAX, +}; + +enum rx_offset { + NO_RX_OFFSET, + RX_OFFSET_PLUS_5_MV, + RX_OFFSET_PLUS_10_MV, + RX_OFFSET_MINUS_5_MV, + RX_OFFSET_MAX, +}; + /* STM32_USBPHYC_VERSION bit fields */ #define MINREV GENMASK(3, 0) #define MAJREV GENMASK(7, 4) @@ -60,6 +139,7 @@ struct stm32_usbphyc_phy { struct regulator *vbus; u32 index; bool active; + u32 tune; }; struct stm32_usbphyc { @@ -375,6 +455,107 @@ static int stm32_usbphyc_clk48_register(struct stm32_usbphyc *usbphyc) return ret; } +static void stm32_usbphyc_phy_tuning(struct stm32_usbphyc *usbphyc, + struct device_node *np, u32 index) +{ + struct stm32_usbphyc_phy *usbphyc_phy = usbphyc->phys[index]; + u32 reg = STM32_USBPHYC_TUNE(index); + u32 otpcomp, val; + int ret; + + /* Backup OTP compensation code */ + otpcomp = FIELD_GET(OTPCOMP, readl_relaxed(usbphyc->base + reg)); + + ret = of_property_read_u32(np, "st,current-boost-microamp", &val); + if (ret != -EINVAL) { + if (!ret && val < BOOST_MAX) { + val = (val == BOOST_2_MA) ? 1 : 0; + usbphyc_phy->tune |= INCURREN | FIELD_PREP(INCURRINT, val); + } else { + dev_warn(usbphyc->dev, "phy%d: invalid st,current-boost-microamp\n", index); + } + } + + if (!of_property_read_bool(np, "st,no-lsfs-fb-cap")) + usbphyc_phy->tune |= LFSCAPEN; + + if (of_property_read_bool(np, "st,slow-hs-slew-rate")) + usbphyc_phy->tune |= HSDRVSLEW; + + ret = of_property_read_u32(np, "st,tune-hs-dc-level", &val); + if (ret != -EINVAL) { + if (!ret && val < DC_MAX) { + if (val == DC_MINUS_5_TO_7_MV) {/* Decreases HS driver DC level */ + usbphyc_phy->tune |= HSDRVDCCUR; + } else if (val > 0) { /* Increases HS driver DC level */ + val = (val == DC_PLUS_10_TO_14_MV) ? 1 : 0; + usbphyc_phy->tune |= HSDRVCURINCR | FIELD_PREP(HSDRVDCLEV, val); + } + } else { + dev_warn(usbphyc->dev, "phy%d: invalid st,tune-hs-dc-level\n", index); + } + } + + if (of_property_read_bool(np, "st,enable-fs-rftime-tuning")) + usbphyc_phy->tune |= FSDRVRFADJ; + + if (of_property_read_bool(np, "st,enable-hs-rftime-reduction")) + usbphyc_phy->tune |= HSDRVRFRED; + + ret = of_property_read_u32(np, "st,trim-hs-current", &val); + if (ret != -EINVAL) { + if (!ret && val < CUR_MAX) + usbphyc_phy->tune |= FIELD_PREP(HSDRVCHKITRM, val); + else + dev_warn(usbphyc->dev, "phy%d: invalid st,trim-hs-current\n", index); + } + + ret = of_property_read_u32(np, "st,trim-hs-impedance", &val); + if (ret != -EINVAL) { + if (!ret && val < IMP_MAX) + usbphyc_phy->tune |= FIELD_PREP(HSDRVCHKZTRM, val); + else + dev_warn(usbphyc->dev, "phy%d: invalid st,trim-hs-impedance\n", index); + } + + ret = of_property_read_u32(np, "st,tune-squelch-level", &val); + if (ret != -EINVAL) { + if (!ret && val < SQLCH_MAX) + usbphyc_phy->tune |= FIELD_PREP(SQLCHCTL, val); + else + dev_warn(usbphyc->dev, "phy%d: invalid st,tune-squelch\n", index); + } + + if (of_property_read_bool(np, "st,enable-hs-rx-gain-eq")) + usbphyc_phy->tune |= HDRXGNEQEN; + + ret = of_property_read_u32(np, "st,tune-hs-rx-offset", &val); + if (ret != -EINVAL) { + if (!ret && val < RX_OFFSET_MAX) + usbphyc_phy->tune |= FIELD_PREP(HSRXOFF, val); + else + dev_warn(usbphyc->dev, "phy%d: invalid st,tune-hs-rx-offset\n", index); + } + + if (of_property_read_bool(np, "st,no-hs-ftime-ctrl")) + usbphyc_phy->tune |= HSFALLPREEM; + + if (!of_property_read_bool(np, "st,no-lsfs-sc")) + usbphyc_phy->tune |= SHTCCTCTLPROT; + + if (of_property_read_bool(np, "st,enable-hs-tx-staggering")) + usbphyc_phy->tune |= STAGSEL; + + /* Restore OTP compensation code */ + usbphyc_phy->tune |= FIELD_PREP(OTPCOMP, otpcomp); + + /* + * By default, if no st,xxx tuning property is used, usbphyc_phy->tune is equal to + * STM32_USBPHYC_TUNE reset value (LFSCAPEN | SHTCCTCTLPROT | OTPCOMP). + */ + writel_relaxed(usbphyc_phy->tune, usbphyc->base + reg); +} + static void stm32_usbphyc_switch_setup(struct stm32_usbphyc *usbphyc, u32 utmi_switch) { @@ -550,6 +731,9 @@ static int stm32_usbphyc_probe(struct platform_device *pdev) usbphyc->phys[port]->vbus = NULL; } + /* Configure phy tuning */ + stm32_usbphyc_phy_tuning(usbphyc, child, index); + port++; } @@ -601,10 +785,17 @@ static int stm32_usbphyc_remove(struct platform_device *pdev) static int __maybe_unused stm32_usbphyc_resume(struct device *dev) { struct stm32_usbphyc *usbphyc = dev_get_drvdata(dev); + struct stm32_usbphyc_phy *usbphyc_phy; + int port; if (usbphyc->switch_setup >= 0) stm32_usbphyc_switch_setup(usbphyc, usbphyc->switch_setup); + for (port = 0; port < usbphyc->nphys; port++) { + usbphyc_phy = usbphyc->phys[port]; + writel_relaxed(usbphyc_phy->tune, usbphyc->base + STM32_USBPHYC_TUNE(port)); + } + return 0; }