From patchwork Thu Oct 28 18:42:37 2021 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 8bit X-Patchwork-Submitter: =?utf-8?q?Marek_Beh=C3=BAn?= X-Patchwork-Id: 12590885 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from mail.kernel.org (mail.kernel.org [198.145.29.99]) by smtp.lore.kernel.org (Postfix) with ESMTP id 5CB12C433EF for ; Thu, 28 Oct 2021 18:42:56 +0000 (UTC) Received: from bombadil.infradead.org (bombadil.infradead.org [198.137.202.133]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by mail.kernel.org (Postfix) with ESMTPS id 2484161040 for ; Thu, 28 Oct 2021 18:42:56 +0000 (UTC) DMARC-Filter: OpenDMARC Filter v1.4.1 mail.kernel.org 2484161040 Authentication-Results: mail.kernel.org; dmarc=fail (p=none dis=none) header.from=kernel.org Authentication-Results: mail.kernel.org; spf=none smtp.mailfrom=lists.infradead.org DKIM-Signature: v=1; a=rsa-sha256; q=dns/txt; c=relaxed/relaxed; d=lists.infradead.org; s=bombadil.20210309; h=Sender: Content-Transfer-Encoding:Content-Type:List-Subscribe:List-Help:List-Post: List-Archive:List-Unsubscribe:List-Id:MIME-Version:References:In-Reply-To: Message-Id:Date:Subject:Cc:To:From:Reply-To:Content-ID:Content-Description: Resent-Date:Resent-From:Resent-Sender:Resent-To:Resent-Cc:Resent-Message-ID: List-Owner; bh=Qtz6PTOs3p2b4jMOCLyPYS194ie6SGPuDs4lMo7LGaE=; b=Dab6WqkzI7LJLG DCMWlZH9E+wQrS0cXbif9rSsEGovTaATzHp8OpFSm3OWe0ZJRNOM0d+cG+OKKYB0zE/55gcRW5BoO AudtiM3Ds8HPw9Cdk+AnQe9Wt+pVhnf12vNQ99G8O0+dmSJMKSS6XTgU5i7hRmFRxHhS1bfAfH1sE Zg66ZmWvSEDWaI5u+zQsmzVwxB5Lhvyg3pQJaLX2jaNybiaPsnarOcU9f1WrlSf4TVONKXe1MJBSl VJYjekPR0W/FYZq3/+ff6ra3ztWbTSaN/qT5wfPId7f3m2WLktYKzXukHx+cVdAC8MYJwthrz7Q/9 OUqVVkJ9jVISvS4CAk5Q==; Received: from localhost ([::1] helo=bombadil.infradead.org) by bombadil.infradead.org with esmtp (Exim 4.94.2 #2 (Red Hat Linux)) id 1mgAMZ-008v38-HQ; Thu, 28 Oct 2021 18:42:55 +0000 Received: from mail.kernel.org ([198.145.29.99]) by bombadil.infradead.org with esmtps (Exim 4.94.2 #2 (Red Hat Linux)) id 1mgAMT-008v0w-FU for linux-phy@lists.infradead.org; Thu, 28 Oct 2021 18:42:53 +0000 Received: by mail.kernel.org (Postfix) with ESMTPSA id 089A960FC0; Thu, 28 Oct 2021 18:42:47 +0000 (UTC) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/simple; d=kernel.org; s=k20201202; t=1635446569; bh=GgYWB9+tEPJA1IilYhXqfNEpy2nKdtONdKg1IBtbjQM=; h=From:To:Cc:Subject:Date:In-Reply-To:References:From; b=Itblq+ca6TN3iR50e5ERlbXK+1WpPpMdJlymgLO1mkf1PHkTrmQzpIQfGB+tXPId9 5pY0ksWRbTZ0Sg1CfDWP+1Za5IcWmKWL3NuYKksZXN4qjPY95KIS/4NZS3nA4Gc1p3 f0+eBw6LR5NAoipKmJeE6q/r065N7dYdDCB1mEX3rOdBM8eWlS16iC5uMCS56ET9T6 u6DylDggCCEkOc0sR6aXmVtGKq+zCBXY2kbZqRMzwAcdci8QrEtf3lgmQJ5J1ItqSP H2YXGzKmcwWiosLKi4ydZ2RIgwyoX8VLx4CJM3M7vD/rG5bCVIFq+AErEflxR9yqMN bnYU9sBGauO2A== From: =?utf-8?q?Marek_Beh=C3=BAn?= To: Miquel Raynal Cc: linux-phy@lists.infradead.org, Vinod Koul , Kishon Vijay Abraham I , pali@kernel.org, =?utf-8?q?Marek_Be?= =?utf-8?q?h=C3=BAn?= Subject: [PATCH phy 1/6] phy: marvell: phy-mvebu-a3700-comphy: Remove port from driver configuration Date: Thu, 28 Oct 2021 20:42:37 +0200 Message-Id: <20211028184242.22105-2-kabel@kernel.org> X-Mailer: git-send-email 2.32.0 In-Reply-To: <20211028184242.22105-1-kabel@kernel.org> References: <20211028184242.22105-1-kabel@kernel.org> MIME-Version: 1.0 X-CRM114-Version: 20100106-BlameMichelson ( TRE 0.8.0 (BSD) ) MR-646709E3 X-CRM114-CacheID: sfid-20211028_114249_585548_908D097F X-CRM114-Status: GOOD ( 17.86 ) X-BeenThere: linux-phy@lists.infradead.org X-Mailman-Version: 2.1.34 Precedence: list List-Id: Linux Phy Mailing list List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: "linux-phy" Errors-To: linux-phy-bounces+linux-phy=archiver.kernel.org@lists.infradead.org From: Pali Rohár Port number is encoded into argument for SMC call. It is zero for SATA, PCIe and also both USB 3.0 PHYs. It is non-zero only for Ethernet PHY (incorrectly called SGMII) on lane 0. Ethernet PHY on lane 1 also uses zero port number. So construct "port" bits for SMC call argument can be constructed directly from PHY type and lane number. Change driver code to always pass zero port number for non-ethernet PHYs and for ethernet PHYs determinate port number from lane number. This simplifies the driver. As port number from DT PHY configuration is not used anymore, remove whole driver code which parses it. This also simplifies the driver. Signed-off-by: Pali Rohár Signed-off-by: Marek Behún Reviewed-by: Miquel Raynal --- drivers/phy/marvell/phy-mvebu-a3700-comphy.c | 62 +++++++++----------- 1 file changed, 29 insertions(+), 33 deletions(-) diff --git a/drivers/phy/marvell/phy-mvebu-a3700-comphy.c b/drivers/phy/marvell/phy-mvebu-a3700-comphy.c index 6781488cfc58..dbb2d4308851 100644 --- a/drivers/phy/marvell/phy-mvebu-a3700-comphy.c +++ b/drivers/phy/marvell/phy-mvebu-a3700-comphy.c @@ -20,7 +20,6 @@ #include #define MVEBU_A3700_COMPHY_LANES 3 -#define MVEBU_A3700_COMPHY_PORTS 2 /* COMPHY Fast SMC function identifiers */ #define COMPHY_SIP_POWER_ON 0x82000001 @@ -45,51 +44,47 @@ #define COMPHY_FW_NET(mode, idx, speed) (COMPHY_FW_MODE(mode) | \ ((idx) << 8) | \ ((speed) << 2)) -#define COMPHY_FW_PCIE(mode, idx, speed, width) (COMPHY_FW_NET(mode, idx, speed) | \ +#define COMPHY_FW_PCIE(mode, speed, width) (COMPHY_FW_NET(mode, 0, speed) | \ ((width) << 18)) struct mvebu_a3700_comphy_conf { unsigned int lane; enum phy_mode mode; int submode; - unsigned int port; u32 fw_mode; }; -#define MVEBU_A3700_COMPHY_CONF(_lane, _mode, _smode, _port, _fw) \ +#define MVEBU_A3700_COMPHY_CONF(_lane, _mode, _smode, _fw) \ { \ .lane = _lane, \ .mode = _mode, \ .submode = _smode, \ - .port = _port, \ .fw_mode = _fw, \ } -#define MVEBU_A3700_COMPHY_CONF_GEN(_lane, _mode, _port, _fw) \ - MVEBU_A3700_COMPHY_CONF(_lane, _mode, PHY_INTERFACE_MODE_NA, _port, _fw) +#define MVEBU_A3700_COMPHY_CONF_GEN(_lane, _mode, _fw) \ + MVEBU_A3700_COMPHY_CONF(_lane, _mode, PHY_INTERFACE_MODE_NA, _fw) -#define MVEBU_A3700_COMPHY_CONF_ETH(_lane, _smode, _port, _fw) \ - MVEBU_A3700_COMPHY_CONF(_lane, PHY_MODE_ETHERNET, _smode, _port, _fw) +#define MVEBU_A3700_COMPHY_CONF_ETH(_lane, _smode, _fw) \ + MVEBU_A3700_COMPHY_CONF(_lane, PHY_MODE_ETHERNET, _smode, _fw) static const struct mvebu_a3700_comphy_conf mvebu_a3700_comphy_modes[] = { /* lane 0 */ - MVEBU_A3700_COMPHY_CONF_GEN(0, PHY_MODE_USB_HOST_SS, 0, + MVEBU_A3700_COMPHY_CONF_GEN(0, PHY_MODE_USB_HOST_SS, COMPHY_FW_MODE_USB3H), - MVEBU_A3700_COMPHY_CONF_ETH(0, PHY_INTERFACE_MODE_SGMII, 1, + MVEBU_A3700_COMPHY_CONF_ETH(0, PHY_INTERFACE_MODE_SGMII, COMPHY_FW_MODE_SGMII), - MVEBU_A3700_COMPHY_CONF_ETH(0, PHY_INTERFACE_MODE_2500BASEX, 1, + MVEBU_A3700_COMPHY_CONF_ETH(0, PHY_INTERFACE_MODE_2500BASEX, COMPHY_FW_MODE_2500BASEX), /* lane 1 */ - MVEBU_A3700_COMPHY_CONF_GEN(1, PHY_MODE_PCIE, 0, - COMPHY_FW_MODE_PCIE), - MVEBU_A3700_COMPHY_CONF_ETH(1, PHY_INTERFACE_MODE_SGMII, 0, + MVEBU_A3700_COMPHY_CONF_GEN(1, PHY_MODE_PCIE, COMPHY_FW_MODE_PCIE), + MVEBU_A3700_COMPHY_CONF_ETH(1, PHY_INTERFACE_MODE_SGMII, COMPHY_FW_MODE_SGMII), - MVEBU_A3700_COMPHY_CONF_ETH(1, PHY_INTERFACE_MODE_2500BASEX, 0, + MVEBU_A3700_COMPHY_CONF_ETH(1, PHY_INTERFACE_MODE_2500BASEX, COMPHY_FW_MODE_2500BASEX), /* lane 2 */ - MVEBU_A3700_COMPHY_CONF_GEN(2, PHY_MODE_SATA, 0, - COMPHY_FW_MODE_SATA), - MVEBU_A3700_COMPHY_CONF_GEN(2, PHY_MODE_USB_HOST_SS, 0, + MVEBU_A3700_COMPHY_CONF_GEN(2, PHY_MODE_SATA, COMPHY_FW_MODE_SATA), + MVEBU_A3700_COMPHY_CONF_GEN(2, PHY_MODE_USB_HOST_SS, COMPHY_FW_MODE_USB3H), }; @@ -98,7 +93,6 @@ struct mvebu_a3700_comphy_lane { unsigned int id; enum phy_mode mode; int submode; - int port; }; static int mvebu_a3700_comphy_smc(unsigned long function, unsigned long lane, @@ -120,7 +114,7 @@ static int mvebu_a3700_comphy_smc(unsigned long function, unsigned long lane, } } -static int mvebu_a3700_comphy_get_fw_mode(int lane, int port, +static int mvebu_a3700_comphy_get_fw_mode(int lane, enum phy_mode mode, int submode) { @@ -132,7 +126,6 @@ static int mvebu_a3700_comphy_get_fw_mode(int lane, int port, for (i = 0; i < n; i++) { if (mvebu_a3700_comphy_modes[i].lane == lane && - mvebu_a3700_comphy_modes[i].port == port && mvebu_a3700_comphy_modes[i].mode == mode && mvebu_a3700_comphy_modes[i].submode == submode) break; @@ -153,7 +146,7 @@ static int mvebu_a3700_comphy_set_mode(struct phy *phy, enum phy_mode mode, if (submode == PHY_INTERFACE_MODE_1000BASEX) submode = PHY_INTERFACE_MODE_SGMII; - fw_mode = mvebu_a3700_comphy_get_fw_mode(lane->id, lane->port, mode, + fw_mode = mvebu_a3700_comphy_get_fw_mode(lane->id, mode, submode); if (fw_mode < 0) { dev_err(lane->dev, "invalid COMPHY mode\n"); @@ -172,9 +165,10 @@ static int mvebu_a3700_comphy_power_on(struct phy *phy) struct mvebu_a3700_comphy_lane *lane = phy_get_drvdata(phy); u32 fw_param; int fw_mode; + int fw_port; int ret; - fw_mode = mvebu_a3700_comphy_get_fw_mode(lane->id, lane->port, + fw_mode = mvebu_a3700_comphy_get_fw_mode(lane->id, lane->mode, lane->submode); if (fw_mode < 0) { dev_err(lane->dev, "invalid COMPHY mode\n"); @@ -191,17 +185,18 @@ static int mvebu_a3700_comphy_power_on(struct phy *phy) fw_param = COMPHY_FW_MODE(fw_mode); break; case PHY_MODE_ETHERNET: + fw_port = (lane->id == 0) ? 1 : 0; switch (lane->submode) { case PHY_INTERFACE_MODE_SGMII: dev_dbg(lane->dev, "set lane %d to SGMII mode\n", lane->id); - fw_param = COMPHY_FW_NET(fw_mode, lane->port, + fw_param = COMPHY_FW_NET(fw_mode, fw_port, COMPHY_FW_SPEED_1_25G); break; case PHY_INTERFACE_MODE_2500BASEX: dev_dbg(lane->dev, "set lane %d to 2500BASEX mode\n", lane->id); - fw_param = COMPHY_FW_NET(fw_mode, lane->port, + fw_param = COMPHY_FW_NET(fw_mode, fw_port, COMPHY_FW_SPEED_3_125G); break; default: @@ -212,8 +207,7 @@ static int mvebu_a3700_comphy_power_on(struct phy *phy) break; case PHY_MODE_PCIE: dev_dbg(lane->dev, "set lane %d to PCIe mode\n", lane->id); - fw_param = COMPHY_FW_PCIE(fw_mode, lane->port, - COMPHY_FW_SPEED_5G, + fw_param = COMPHY_FW_PCIE(fw_mode, COMPHY_FW_SPEED_5G, phy->attrs.bus_width); break; default: @@ -247,17 +241,20 @@ static struct phy *mvebu_a3700_comphy_xlate(struct device *dev, struct of_phandle_args *args) { struct mvebu_a3700_comphy_lane *lane; + unsigned int port; struct phy *phy; - if (WARN_ON(args->args[0] >= MVEBU_A3700_COMPHY_PORTS)) - return ERR_PTR(-EINVAL); - phy = of_phy_simple_xlate(dev, args); if (IS_ERR(phy)) return phy; lane = phy_get_drvdata(phy); - lane->port = args->args[0]; + + port = args->args[0]; + if (port != 0 && (port != 1 || lane->id != 0)) { + dev_err(lane->dev, "invalid port number %u\n", port); + return ERR_PTR(-EINVAL); + } return phy; } @@ -302,7 +299,6 @@ static int mvebu_a3700_comphy_probe(struct platform_device *pdev) lane->mode = PHY_MODE_INVALID; lane->submode = PHY_INTERFACE_MODE_NA; lane->id = lane_id; - lane->port = -1; phy_set_drvdata(phy, lane); } From patchwork Thu Oct 28 18:42:38 2021 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 8bit X-Patchwork-Submitter: =?utf-8?q?Marek_Beh=C3=BAn?= X-Patchwork-Id: 12590895 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from mail.kernel.org (mail.kernel.org [198.145.29.99]) by smtp.lore.kernel.org (Postfix) with ESMTP id 15BF0C433EF for ; Thu, 28 Oct 2021 18:43:04 +0000 (UTC) Received: from bombadil.infradead.org (bombadil.infradead.org [198.137.202.133]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by mail.kernel.org (Postfix) with ESMTPS id C7E8660D43 for ; Thu, 28 Oct 2021 18:43:03 +0000 (UTC) DMARC-Filter: OpenDMARC Filter v1.4.1 mail.kernel.org C7E8660D43 Authentication-Results: mail.kernel.org; dmarc=fail (p=none dis=none) header.from=kernel.org Authentication-Results: mail.kernel.org; spf=none smtp.mailfrom=lists.infradead.org DKIM-Signature: v=1; a=rsa-sha256; q=dns/txt; c=relaxed/relaxed; d=lists.infradead.org; s=bombadil.20210309; h=Sender: Content-Transfer-Encoding:Content-Type:List-Subscribe:List-Help:List-Post: List-Archive:List-Unsubscribe:List-Id:MIME-Version:References:In-Reply-To: Message-Id:Date:Subject:Cc:To:From:Reply-To:Content-ID:Content-Description: Resent-Date:Resent-From:Resent-Sender:Resent-To:Resent-Cc:Resent-Message-ID: List-Owner; bh=1is92w0/RhZDjLE1kat35MnXi2Ic20rWW9kIfm+xeD0=; b=NILFta3uZP1vWO JHVT3xAP2mNrmW7GovgfXHt6Bjp4oQi64sabQlak4mJLIOZYUOsH8zzwhqB8f/3z6jtUhs/kIeYCv puJbjmK4EifZmfaeyJPA35I7H/NswoUI5nLKE8QMV3FjlnI7xX61s6exBqxmMAlBviEc7onAyZFmc wnetfM5kZRUSTHCEMJHVY1O82moP1+5chjuxalvNg0rsWewV3rh8T2cnisW9Ob54Wy8w1gRu51p/7 z9AHCxT+vDiNXxNA6AoXfzSmOG1GnjQcPY5hAuj9OoNFxOh+AQVxNhKBN0w3kiVrNEo2gT5yjlyHe GVCW5lE3HZTEKkI1Xplg==; Received: from localhost ([::1] helo=bombadil.infradead.org) by bombadil.infradead.org with esmtp (Exim 4.94.2 #2 (Red Hat Linux)) id 1mgAMh-008v6L-8b; Thu, 28 Oct 2021 18:43:03 +0000 Received: from mail.kernel.org ([198.145.29.99]) by bombadil.infradead.org with esmtps (Exim 4.94.2 #2 (Red Hat Linux)) id 1mgAMV-008v1a-7x for linux-phy@lists.infradead.org; Thu, 28 Oct 2021 18:43:01 +0000 Received: by mail.kernel.org (Postfix) with ESMTPSA id 9189660C40; Thu, 28 Oct 2021 18:42:49 +0000 (UTC) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/simple; d=kernel.org; s=k20201202; t=1635446570; bh=BnPT8W2x1ndH11O2kPKHUBGuhoP9hSoUdIEdaD7yOOA=; h=From:To:Cc:Subject:Date:In-Reply-To:References:From; b=ZEez1qsFy4GX/kM0uwBoirO8Qzj9v5erd9nhthLoRQ49RRpxnSMFCQ7n3fYY0emFc kJ8/RjDV3BStF3WPCJOejjnUYv8nGSZ/NrYXcbQD5snJ0YqCz9GrnG3srLrdfMHcIz xS2UfBoKduGuOVmr+CDmhx2+wW0+b3aDD1bC/tKt8OSkW28lajUSVwRcq7Jjs4Ds2b 9KVa0GxruqmFG6QFfkXrkDv/TeLWXOkqKYSW8d9z/M5P2xCcWzwQc65HTC3YD7UvVz Fh69LUbKy97xXectDuIk5OQsfghDIwiKOAyB26z31CIkZzWDc415UjjpspFb5DaI7p vvEerR1mPrdTA== From: =?utf-8?q?Marek_Beh=C3=BAn?= To: Miquel Raynal Cc: linux-phy@lists.infradead.org, Vinod Koul , Kishon Vijay Abraham I , pali@kernel.org, =?utf-8?q?Marek_Be?= =?utf-8?q?h=C3=BAn?= Subject: [PATCH phy 2/6] phy: marvell: phy-mvebu-a3700-comphy: Add native kernel implementation Date: Thu, 28 Oct 2021 20:42:38 +0200 Message-Id: <20211028184242.22105-3-kabel@kernel.org> X-Mailer: git-send-email 2.32.0 In-Reply-To: <20211028184242.22105-1-kabel@kernel.org> References: <20211028184242.22105-1-kabel@kernel.org> MIME-Version: 1.0 X-CRM114-Version: 20100106-BlameMichelson ( TRE 0.8.0 (BSD) ) MR-646709E3 X-CRM114-CacheID: sfid-20211028_114251_467648_FD52545F X-CRM114-Status: GOOD ( 15.44 ) X-BeenThere: linux-phy@lists.infradead.org X-Mailman-Version: 2.1.34 Precedence: list List-Id: Linux Phy Mailing list List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: "linux-phy" Errors-To: linux-phy-bounces+linux-phy=archiver.kernel.org@lists.infradead.org From: Pali Rohár Remove old RPC implementation and add a new native kernel implementation. The old implementation uses ARM SMC API to issue RPC calls to ARM Trusted Firmware which provides real implementation of PHY configuration. But older versions of ARM Trusted Firmware do not provide this PY configuration functionality, simply returning: operation not supported; or worse, some versions provide the configuration functionality incorrectly. For example the firmware shipped in ESPRESSObin board has this older version of ARM Trusted Firmware and therefore SATA, USB 3.0 and PCIe functionality do not work with newer versions of Linux kernel. Due to the above reasons, the following commits were introduced into Linux, to workaround these issues by ignoring -EOPNOTSUPP error code from phy-mvebu-a3700-comphy driver function phy_power_on(): commit 45aefe3d2251 ("ata: ahci: mvebu: Make SATA PHY optional for Armada 3720") commit 3241929b67d2 ("usb: host: xhci: mvebu: make USB 3.0 PHY optional for Armada 3720") commit b0c6ae0f8948 ("PCI: aardvark: Fix initialization with old Marvell's Arm Trusted Firmware") Replace this RPC implementation with proper native kernel implementation, which is independent on the firmware. Never return -EOPNOTSUPP for proper arguments. This should solve multiple issues with real-world boards, where it is not possible or really inconvenient to change the firmware. Let's eliminate these issues. This implementation is ported directly from Armada 3720 comphy driver found in newest version of ARM Trusted Firmware source code. Signed-off-by: Pali Rohár Signed-off-by: Marek Behún Acked-by: Miquel Raynal --- drivers/phy/marvell/phy-mvebu-a3700-comphy.c | 1296 ++++++++++++++++-- 1 file changed, 1179 insertions(+), 117 deletions(-) diff --git a/drivers/phy/marvell/phy-mvebu-a3700-comphy.c b/drivers/phy/marvell/phy-mvebu-a3700-comphy.c index dbb2d4308851..3fc01d8fbea9 100644 --- a/drivers/phy/marvell/phy-mvebu-a3700-comphy.c +++ b/drivers/phy/marvell/phy-mvebu-a3700-comphy.c @@ -5,12 +5,14 @@ * Authors: * Evan Wang * Miquèl Raynal + * Pali Rohár * * Structure inspired from phy-mvebu-cp110-comphy.c written by Antoine Tenart. * SMC call initial support done by Grzegorz Jaszczyk. + * Comphy code from ARM Trusted Firmware ported by Pali Rohár . */ -#include +#include #include #include #include @@ -19,102 +21,1122 @@ #include #include -#define MVEBU_A3700_COMPHY_LANES 3 - -/* COMPHY Fast SMC function identifiers */ -#define COMPHY_SIP_POWER_ON 0x82000001 -#define COMPHY_SIP_POWER_OFF 0x82000002 -#define COMPHY_SIP_PLL_LOCK 0x82000003 - -#define COMPHY_FW_MODE_SATA 0x1 -#define COMPHY_FW_MODE_SGMII 0x2 -#define COMPHY_FW_MODE_2500BASEX 0x3 -#define COMPHY_FW_MODE_USB3H 0x4 -#define COMPHY_FW_MODE_USB3D 0x5 -#define COMPHY_FW_MODE_PCIE 0x6 -#define COMPHY_FW_MODE_USB3 0xa - -#define COMPHY_FW_SPEED_1_25G 0 /* SGMII 1G */ -#define COMPHY_FW_SPEED_2_5G 1 -#define COMPHY_FW_SPEED_3_125G 2 /* 2500BASE-X */ -#define COMPHY_FW_SPEED_5G 3 -#define COMPHY_FW_SPEED_MAX 0x3F - -#define COMPHY_FW_MODE(mode) ((mode) << 12) -#define COMPHY_FW_NET(mode, idx, speed) (COMPHY_FW_MODE(mode) | \ - ((idx) << 8) | \ - ((speed) << 2)) -#define COMPHY_FW_PCIE(mode, speed, width) (COMPHY_FW_NET(mode, 0, speed) | \ - ((width) << 18)) +#define PLL_SET_DELAY_US 600 +#define COMPHY_PLL_SLEEP 1000 +#define COMPHY_PLL_TIMEOUT 150000 + +#define COMPHY_SELECTOR_PHY_REG 0xFC +/* bit0: 0: Lane0 is GBE0; 1: Lane1 is PCIE */ +#define COMPHY_SELECTOR_PCIE_GBE0_SEL_BIT BIT(0) +/* bit4: 0: Lane1 is GBE1; 1: Lane1 is USB3 */ +#define COMPHY_SELECTOR_USB3_GBE1_SEL_BIT BIT(4) +/* bit8: 0: Lane1 is USB, Lane2 is SATA; 1: Lane2 is USB3 */ +#define COMPHY_SELECTOR_USB3_PHY_SEL_BIT BIT(8) + +/* SATA PHY register offset */ +#define SATAPHY_LANE2_REG_BASE_OFFSET 0x200 + +/* USB3 PHY offset compared to SATA PHY */ +#define USB3PHY_LANE2_REG_BASE_OFFSET 0x200 + +/* Comphy lane2 indirect access register offset */ +#define COMPHY_LANE2_INDIR_ADDR_OFFSET 0x0 +#define COMPHY_LANE2_INDIR_DATA_OFFSET 0x4 + +/* PHY shift to get related register address */ +enum { + PCIE = 1, + USB3, +}; + +#define PCIEPHY_SHFT 2 +#define USB3PHY_SHFT 2 +#define PHY_SHFT(unit) ((unit == PCIE) ? PCIEPHY_SHFT : USB3PHY_SHFT) + +/* PHY register */ +#define COMPHY_POWER_PLL_CTRL 0x01 +#define PWR_PLL_CTRL_ADDR(unit) (COMPHY_POWER_PLL_CTRL * PHY_SHFT(unit)) +#define PU_IVREF_BIT BIT(15) +#define PU_PLL_BIT BIT(14) +#define PU_RX_BIT BIT(13) +#define PU_TX_BIT BIT(12) +#define PU_TX_INTP_BIT BIT(11) +#define PU_DFE_BIT BIT(10) +#define RESET_DTL_RX_BIT BIT(9) +#define PLL_LOCK_BIT BIT(8) +#define REF_FREF_SEL_OFFSET 0 +#define REF_FREF_SEL_MASK (0x1F << REF_FREF_SEL_OFFSET) +#define REF_CLOCK_SPEED_25M (0x1 << REF_FREF_SEL_OFFSET) +#define REF_CLOCK_SPEED_30M (0x2 << REF_FREF_SEL_OFFSET) +#define PCIE_REF_CLOCK_SPEED_25M REF_CLOCK_SPEED_30M +#define USB3_REF_CLOCK_SPEED_25M REF_CLOCK_SPEED_30M +#define REF_CLOCK_SPEED_40M (0x3 << REF_FREF_SEL_OFFSET) +#define REF_CLOCK_SPEED_50M (0x4 << REF_FREF_SEL_OFFSET) +#define COMPHY_MODE_OFFSET 5 +#define COMPHY_MODE_MASK (7 << COMPHY_MODE_OFFSET) +#define COMPHY_MODE_SATA (0x0 << COMPHY_MODE_OFFSET) +#define COMPHY_MODE_PCIE (0x3 << COMPHY_MODE_OFFSET) +#define COMPHY_MODE_SERDES (0x4 << COMPHY_MODE_OFFSET) +#define COMPHY_MODE_USB3 (0x5 << COMPHY_MODE_OFFSET) + +#define COMPHY_KVCO_CAL_CTRL 0x02 +#define KVCO_CAL_CTRL_ADDR(unit) (COMPHY_KVCO_CAL_CTRL * PHY_SHFT(unit)) +#define USE_MAX_PLL_RATE_BIT BIT(12) +#define SPEED_PLL_OFFSET 2 +#define SPEED_PLL_MASK (0x3F << SPEED_PLL_OFFSET) +#define SPEED_PLL_VALUE_16 (0x10 << SPEED_PLL_OFFSET) + +#define COMPHY_RESERVED_REG 0x0E +#define PHYCTRL_FRM_PIN_BIT BIT(13) + +#define COMPHY_LOOPBACK_REG0 0x23 +#define DIG_LB_EN_ADDR(unit) (COMPHY_LOOPBACK_REG0 * PHY_SHFT(unit)) +#define SEL_DATA_WIDTH_OFFSET 10 +#define SEL_DATA_WIDTH_MASK (0x3 << SEL_DATA_WIDTH_OFFSET) +#define DATA_WIDTH_10BIT (0x0 << SEL_DATA_WIDTH_OFFSET) +#define DATA_WIDTH_20BIT (0x1 << SEL_DATA_WIDTH_OFFSET) +#define DATA_WIDTH_40BIT (0x2 << SEL_DATA_WIDTH_OFFSET) +#define PLL_READY_TX_BIT BIT(4) + +#define COMPHY_SYNC_PATTERN_REG 0x24 +#define SYNC_PATTERN_REG_ADDR(unit) (COMPHY_SYNC_PATTERN_REG * PHY_SHFT(unit)) +#define TXD_INVERT_BIT BIT(10) +#define RXD_INVERT_BIT BIT(11) + +#define COMPHY_SYNC_MASK_GEN_REG 0x25 +#define PHY_GEN_MAX_OFFSET 10 +#define PHY_GEN_MAX_MASK (3 << PHY_GEN_MAX_OFFSET) +#define PHY_GEN_USB3_5G (1 << PHY_GEN_MAX_OFFSET) + +#define COMPHY_ISOLATION_CTRL_REG 0x26 +#define ISOLATION_CTRL_REG_ADDR(unit) (COMPHY_ISOLATION_CTRL_REG * PHY_SHFT(unit)) +#define PHY_ISOLATE_MODE BIT(15) + +#define COMPHY_MISC_REG0_ADDR 0x4F +#define MISC_REG0_ADDR(unit) (COMPHY_MISC_REG0_ADDR * PHY_SHFT(unit)) +#define CLK100M_125M_EN BIT(4) +#define TXDCLK_2X_SEL BIT(6) +#define CLK500M_EN BIT(7) +#define PHY_REF_CLK_SEL BIT(10) +#define MISC_REG0_DEFAULT_VALUE 0xA00D + +#define COMPHY_REG_GEN2_SET_2 0x3e +#define GEN2_SETTING_2_ADDR(unit) (COMPHY_REG_GEN2_SET_2 * PHY_SHFT(unit)) +#define G2_TX_SSC_AMP_VALUE_20 BIT(14) +#define G2_TX_SSC_AMP_OFF 9 +#define G2_TX_SSC_AMP_LEN 7 +#define G2_TX_SSC_AMP_MASK (((1 << G2_TX_SSC_AMP_LEN) - 1) << G2_TX_SSC_AMP_OFF) + +#define COMPHY_REG_GEN2_SET_3 0x3f +#define GEN2_SETTING_3_ADDR(unit) (COMPHY_REG_GEN2_SET_3 * PHY_SHFT(unit)) +#define G3_TX_SSC_AMP_OFF 9 +#define G3_TX_SSC_AMP_LEN 7 +#define G3_TX_SSC_AMP_MASK (((1 << G2_TX_SSC_AMP_LEN) - 1) << G2_TX_SSC_AMP_OFF) +#define G3_VREG_RXTX_MAS_ISET_OFF 7 +#define G3_VREG_RXTX_MAS_ISET_60U (0 << G3_VREG_RXTX_MAS_ISET_OFF) +#define G3_VREG_RXTX_MAS_ISET_80U (1 << G3_VREG_RXTX_MAS_ISET_OFF) +#define G3_VREG_RXTX_MAS_ISET_100U (2 << G3_VREG_RXTX_MAS_ISET_OFF) +#define G3_VREG_RXTX_MAS_ISET_120U (3 << G3_VREG_RXTX_MAS_ISET_OFF) +#define G3_VREG_RXTX_MAS_ISET_MASK (BIT(7) | BIT(8)) +#define RSVD_PH03FH_6_0_OFF 0 +#define RSVD_PH03FH_6_0_LEN 7 +#define RSVD_PH03FH_6_0_MASK (((1 << RSVD_PH03FH_6_0_LEN) - 1) << RSVD_PH03FH_6_0_OFF) + +#define COMPHY_REG_UNIT_CTRL_ADDR 0x48 +#define UNIT_CTRL_ADDR(unit) (COMPHY_REG_UNIT_CTRL_ADDR * PHY_SHFT(unit)) +#define IDLE_SYNC_EN BIT(12) +#define UNIT_CTRL_DEFAULT_VALUE 0x60 + +#define COMPHY_MISC_REG1_ADDR 0x73 +#define MISC_REG1_ADDR(unit) (COMPHY_MISC_REG1_ADDR * PHY_SHFT(unit)) +#define SEL_BITS_PCIE_FORCE BIT(15) + +#define COMPHY_REG_GEN3_SETTINGS_3 0x112 +#define COMPHY_GEN_FFE_CAP_SEL_MASK 0xF +#define COMPHY_GEN_FFE_CAP_SEL_VALUE 0xF + +#define COMPHY_REG_LANE_CFG0_ADDR 0x180 +#define LANE_CFG0_ADDR(unit) (COMPHY_REG_LANE_CFG0_ADDR * PHY_SHFT(unit)) +#define PRD_TXDEEMPH0_MASK BIT(0) +#define PRD_TXMARGIN_MASK (BIT(1) | BIT(2) | BIT(3)) +#define PRD_TXSWING_MASK BIT(4) +#define CFG_TX_ALIGN_POS_MASK (BIT(5) | BIT(6) | BIT(7) | BIT(8)) + +#define COMPHY_REG_LANE_CFG1_ADDR 0x181 +#define LANE_CFG1_ADDR(unit) (COMPHY_REG_LANE_CFG1_ADDR * PHY_SHFT(unit)) +#define PRD_TXDEEMPH1_MASK BIT(15) +#define USE_MAX_PLL_RATE_EN BIT(9) +#define TX_DET_RX_MODE BIT(6) +#define GEN2_TX_DATA_DLY_MASK (BIT(3) | BIT(4)) +#define GEN2_TX_DATA_DLY_DEFT (2 << 3) +#define TX_ELEC_IDLE_MODE_EN BIT(0) + +#define COMPHY_REG_LANE_STATUS1_ADDR 0x183 +#define LANE_STATUS1_ADDR(unit) (COMPHY_REG_LANE_STATUS1_ADDR * PHY_SHFT(unit)) +#define TXDCLK_PCLK_EN BIT(0) + +#define COMPHY_REG_LANE_CFG4_ADDR 0x188 +#define LANE_CFG4_ADDR(unit) (COMPHY_REG_LANE_CFG4_ADDR * PHY_SHFT(unit)) +#define SPREAD_SPECTRUM_CLK_EN BIT(7) + +#define COMPHY_REG_GLOB_PHY_CTRL0_ADDR 0x1C1 +#define GLOB_PHY_CTRL0_ADDR(unit) (COMPHY_REG_GLOB_PHY_CTRL0_ADDR * PHY_SHFT(unit)) +#define SOFT_RESET BIT(0) +#define MODE_REFDIV 0x30 +#define MODE_CORE_CLK_FREQ_SEL BIT(9) +#define MODE_PIPE_WIDTH_32 BIT(3) +#define MODE_REFDIV_OFFSET 4 +#define MODE_REFDIV_LEN 2 +#define MODE_REFDIV_MASK (0x3 << MODE_REFDIV_OFFSET) +#define MODE_REFDIV_BY_4 (0x2 << MODE_REFDIV_OFFSET) + +#define COMPHY_REG_TEST_MODE_CTRL_ADDR 0x1C2 +#define TEST_MODE_CTRL_ADDR(unit) (COMPHY_REG_TEST_MODE_CTRL_ADDR * PHY_SHFT(unit)) +#define MODE_MARGIN_OVERRIDE BIT(2) + +#define COMPHY_REG_GLOB_CLK_SRC_LO_ADDR 0x1C3 +#define GLOB_CLK_SRC_LO_ADDR(unit) (COMPHY_REG_GLOB_CLK_SRC_LO_ADDR * PHY_SHFT(unit)) +#define MODE_CLK_SRC BIT(0) +#define BUNDLE_PERIOD_SEL BIT(1) +#define BUNDLE_PERIOD_SCALE (BIT(2) | BIT(3)) +#define BUNDLE_SAMPLE_CTRL BIT(4) +#define PLL_READY_DLY (BIT(5) | BIT(6) | BIT(7)) +#define CFG_SEL_20B BIT(15) + +#define COMPHY_REG_PWR_MGM_TIM1_ADDR 0x1D0 +#define PWR_MGM_TIM1_ADDR(unit) (COMPHY_REG_PWR_MGM_TIM1_ADDR * PHY_SHFT(unit)) +#define CFG_PM_OSCCLK_WAIT_OFF 12 +#define CFG_PM_OSCCLK_WAIT_LEN 4 +#define CFG_PM_OSCCLK_WAIT_MASK (((1 << CFG_PM_OSCCLK_WAIT_LEN) - 1) << \ + CFG_PM_OSCCLK_WAIT_OFF) +#define CFG_PM_RXDEN_WAIT_OFF 8 +#define CFG_PM_RXDEN_WAIT_LEN 4 +#define CFG_PM_RXDEN_WAIT_MASK (((1 << CFG_PM_RXDEN_WAIT_LEN) - 1) << \ + CFG_PM_RXDEN_WAIT_OFF) +#define CFG_PM_RXDEN_WAIT_1_UNIT (1 << CFG_PM_RXDEN_WAIT_OFF) +#define CFG_PM_RXDLOZ_WAIT_OFF 0 +#define CFG_PM_RXDLOZ_WAIT_LEN 8 +#define CFG_PM_RXDLOZ_WAIT_MASK (((1 << CFG_PM_RXDLOZ_WAIT_LEN) - 1) << \ + CFG_PM_RXDLOZ_WAIT_OFF) +#define CFG_PM_RXDLOZ_WAIT_7_UNIT (7 << CFG_PM_RXDLOZ_WAIT_OFF) +#define CFG_PM_RXDLOZ_WAIT_12_UNIT (0xC << CFG_PM_RXDLOZ_WAIT_OFF) + +/* SERDES */ +#define COMPHY_PHY_CFG1_OFFSET(lane) ((1 - (lane)) * 0x28) +#define PIN_PU_IVEREF_BIT BIT(1) +#define PIN_RESET_CORE_BIT BIT(11) +#define PIN_RESET_COMPHY_BIT BIT(12) +#define PIN_PU_PLL_BIT BIT(16) +#define PIN_PU_RX_BIT BIT(17) +#define PIN_PU_TX_BIT BIT(18) +#define PIN_TX_IDLE_BIT BIT(19) +#define GEN_RX_SEL_OFFSET 22 +#define GEN_RX_SEL_MASK (0xF << GEN_RX_SEL_OFFSET) +#define GEN_TX_SEL_OFFSET 26 +#define GEN_TX_SEL_MASK (0xF << GEN_TX_SEL_OFFSET) +#define PHY_RX_INIT_BIT BIT(30) +#define SERDES_SPEED_1_25_G 0x6 +#define SERDES_SPEED_2_5_G 0x8 + +/* COMPHY status reg: + * lane0: PCIe/GbE0 PHY Status 1 + * lane1: USB3/GbE1 PHY Status 1 + */ +#define COMPHY_PHY_STATUS_OFFSET(lane) (0x18 + (1 - (lane)) * 0x28) +#define PHY_RX_INIT_DONE_BIT BIT(0) +#define PHY_PLL_READY_RX_BIT BIT(2) +#define PHY_PLL_READY_TX_BIT BIT(3) + +#define GBE_PHY_ADDR(base, off) ((base) + (((off) & 0x00007FF) * 2)) struct mvebu_a3700_comphy_conf { unsigned int lane; enum phy_mode mode; int submode; - u32 fw_mode; }; -#define MVEBU_A3700_COMPHY_CONF(_lane, _mode, _smode, _fw) \ +#define MVEBU_A3700_COMPHY_CONF(_lane, _mode, _smode) \ { \ .lane = _lane, \ .mode = _mode, \ .submode = _smode, \ - .fw_mode = _fw, \ } -#define MVEBU_A3700_COMPHY_CONF_GEN(_lane, _mode, _fw) \ - MVEBU_A3700_COMPHY_CONF(_lane, _mode, PHY_INTERFACE_MODE_NA, _fw) +#define MVEBU_A3700_COMPHY_CONF_GEN(_lane, _mode) \ + MVEBU_A3700_COMPHY_CONF(_lane, _mode, PHY_INTERFACE_MODE_NA) -#define MVEBU_A3700_COMPHY_CONF_ETH(_lane, _smode, _fw) \ - MVEBU_A3700_COMPHY_CONF(_lane, PHY_MODE_ETHERNET, _smode, _fw) +#define MVEBU_A3700_COMPHY_CONF_ETH(_lane, _smode) \ + MVEBU_A3700_COMPHY_CONF(_lane, PHY_MODE_ETHERNET, _smode) static const struct mvebu_a3700_comphy_conf mvebu_a3700_comphy_modes[] = { /* lane 0 */ - MVEBU_A3700_COMPHY_CONF_GEN(0, PHY_MODE_USB_HOST_SS, - COMPHY_FW_MODE_USB3H), - MVEBU_A3700_COMPHY_CONF_ETH(0, PHY_INTERFACE_MODE_SGMII, - COMPHY_FW_MODE_SGMII), - MVEBU_A3700_COMPHY_CONF_ETH(0, PHY_INTERFACE_MODE_2500BASEX, - COMPHY_FW_MODE_2500BASEX), + MVEBU_A3700_COMPHY_CONF_GEN(0, PHY_MODE_USB_HOST_SS), + MVEBU_A3700_COMPHY_CONF_ETH(0, PHY_INTERFACE_MODE_SGMII), + MVEBU_A3700_COMPHY_CONF_ETH(0, PHY_INTERFACE_MODE_1000BASEX), + MVEBU_A3700_COMPHY_CONF_ETH(0, PHY_INTERFACE_MODE_2500BASEX), /* lane 1 */ - MVEBU_A3700_COMPHY_CONF_GEN(1, PHY_MODE_PCIE, COMPHY_FW_MODE_PCIE), - MVEBU_A3700_COMPHY_CONF_ETH(1, PHY_INTERFACE_MODE_SGMII, - COMPHY_FW_MODE_SGMII), - MVEBU_A3700_COMPHY_CONF_ETH(1, PHY_INTERFACE_MODE_2500BASEX, - COMPHY_FW_MODE_2500BASEX), + MVEBU_A3700_COMPHY_CONF_GEN(1, PHY_MODE_PCIE), + MVEBU_A3700_COMPHY_CONF_ETH(1, PHY_INTERFACE_MODE_SGMII), + MVEBU_A3700_COMPHY_CONF_ETH(1, PHY_INTERFACE_MODE_1000BASEX), + MVEBU_A3700_COMPHY_CONF_ETH(1, PHY_INTERFACE_MODE_2500BASEX), /* lane 2 */ - MVEBU_A3700_COMPHY_CONF_GEN(2, PHY_MODE_SATA, COMPHY_FW_MODE_SATA), - MVEBU_A3700_COMPHY_CONF_GEN(2, PHY_MODE_USB_HOST_SS, - COMPHY_FW_MODE_USB3H), + MVEBU_A3700_COMPHY_CONF_GEN(2, PHY_MODE_SATA), + MVEBU_A3700_COMPHY_CONF_GEN(2, PHY_MODE_USB_HOST_SS), +}; + +struct mvebu_a3700_comphy_priv { + void __iomem *comphy_regs; + void __iomem *pcie_gbe0_phy_regs; + void __iomem *usb3_gbe1_phy_regs; + void __iomem *sata_usb3_phy_regs; + bool xtal_is_40m; }; struct mvebu_a3700_comphy_lane { + struct mvebu_a3700_comphy_priv *priv; struct device *dev; unsigned int id; enum phy_mode mode; int submode; + bool invert_tx; + bool invert_rx; +}; + +struct gbe_phy_init_data_fix { + u16 addr; + u16 value; +}; + +/* Changes to 40M1G25 mode data required for running 40M3G125 init mode */ +static struct gbe_phy_init_data_fix gbe_phy_init_fix[] = { + {0x005, 0x07CC}, {0x015, 0x0000}, {0x01B, 0x0000}, {0x01D, 0x0000}, + {0x01E, 0x0000}, {0x01F, 0x0000}, {0x020, 0x0000}, {0x021, 0x0030}, + {0x026, 0x0888}, {0x04D, 0x0152}, {0x04F, 0xA020}, {0x050, 0x07CC}, + {0x053, 0xE9CA}, {0x055, 0xBD97}, {0x071, 0x3015}, {0x076, 0x03AA}, + {0x07C, 0x0FDF}, {0x0C2, 0x3030}, {0x0C3, 0x8000}, {0x0E2, 0x5550}, + {0x0E3, 0x12A4}, {0x0E4, 0x7D00}, {0x0E6, 0x0C83}, {0x101, 0xFCC0}, + {0x104, 0x0C10} +}; + +/* 40M1G25 mode init data */ +static u16 gbe_phy_init[512] = { + /* 0 1 2 3 4 5 6 7 */ + /*-----------------------------------------------------------*/ + /* 8 9 A B C D E F */ + 0x3110, 0xFD83, 0x6430, 0x412F, 0x82C0, 0x06FA, 0x4500, 0x6D26, /* 00 */ + 0xAFC0, 0x8000, 0xC000, 0x0000, 0x2000, 0x49CC, 0x0BC9, 0x2A52, /* 08 */ + 0x0BD2, 0x0CDE, 0x13D2, 0x0CE8, 0x1149, 0x10E0, 0x0000, 0x0000, /* 10 */ + 0x0000, 0x0000, 0x0000, 0x0001, 0x0000, 0x4134, 0x0D2D, 0xFFFF, /* 18 */ + 0xFFE0, 0x4030, 0x1016, 0x0030, 0x0000, 0x0800, 0x0866, 0x0000, /* 20 */ + 0x0000, 0x0000, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, /* 28 */ + 0xFFFF, 0xFFFF, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, /* 30 */ + 0x0000, 0x0000, 0x000F, 0x6A62, 0x1988, 0x3100, 0x3100, 0x3100, /* 38 */ + 0x3100, 0xA708, 0x2430, 0x0830, 0x1030, 0x4610, 0xFF00, 0xFF00, /* 40 */ + 0x0060, 0x1000, 0x0400, 0x0040, 0x00F0, 0x0155, 0x1100, 0xA02A, /* 48 */ + 0x06FA, 0x0080, 0xB008, 0xE3ED, 0x5002, 0xB592, 0x7A80, 0x0001, /* 50 */ + 0x020A, 0x8820, 0x6014, 0x8054, 0xACAA, 0xFC88, 0x2A02, 0x45CF, /* 58 */ + 0x000F, 0x1817, 0x2860, 0x064F, 0x0000, 0x0204, 0x1800, 0x6000, /* 60 */ + 0x810F, 0x4F23, 0x4000, 0x4498, 0x0850, 0x0000, 0x000E, 0x1002, /* 68 */ + 0x9D3A, 0x3009, 0xD066, 0x0491, 0x0001, 0x6AB0, 0x0399, 0x3780, /* 70 */ + 0x0040, 0x5AC0, 0x4A80, 0x0000, 0x01DF, 0x0000, 0x0007, 0x0000, /* 78 */ + 0x2D54, 0x00A1, 0x4000, 0x0100, 0xA20A, 0x0000, 0x0000, 0x0000, /* 80 */ + 0x0000, 0x0000, 0x0000, 0x7400, 0x0E81, 0x1000, 0x1242, 0x0210, /* 88 */ + 0x80DF, 0x0F1F, 0x2F3F, 0x4F5F, 0x6F7F, 0x0F1F, 0x2F3F, 0x4F5F, /* 90 */ + 0x6F7F, 0x4BAD, 0x0000, 0x0000, 0x0800, 0x0000, 0x2400, 0xB651, /* 98 */ + 0xC9E0, 0x4247, 0x0A24, 0x0000, 0xAF19, 0x1004, 0x0000, 0x0000, /* A0 */ + 0x0000, 0x0013, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, /* A8 */ + 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, /* B0 */ + 0x0000, 0x0000, 0x0000, 0x0060, 0x0000, 0x0000, 0x0000, 0x0000, /* B8 */ + 0x0000, 0x0000, 0x3010, 0xFA00, 0x0000, 0x0000, 0x0000, 0x0003, /* C0 */ + 0x1618, 0x8200, 0x8000, 0x0400, 0x050F, 0x0000, 0x0000, 0x0000, /* C8 */ + 0x4C93, 0x0000, 0x1000, 0x1120, 0x0010, 0x1242, 0x1242, 0x1E00, /* D0 */ + 0x0000, 0x0000, 0x0000, 0x00F8, 0x0000, 0x0041, 0x0800, 0x0000, /* D8 */ + 0x82A0, 0x572E, 0x2490, 0x14A9, 0x4E00, 0x0000, 0x0803, 0x0541, /* E0 */ + 0x0C15, 0x0000, 0x0000, 0x0400, 0x2626, 0x0000, 0x0000, 0x4200, /* E8 */ + 0x0000, 0xAA55, 0x1020, 0x0000, 0x0000, 0x5010, 0x0000, 0x0000, /* F0 */ + 0x0000, 0x0000, 0x5000, 0x0000, 0x0000, 0x0000, 0x02F2, 0x0000, /* F8 */ + 0x101F, 0xFDC0, 0x4000, 0x8010, 0x0110, 0x0006, 0x0000, 0x0000, /*100 */ + 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, /*108 */ + 0x04CF, 0x0000, 0x04CF, 0x0000, 0x04CF, 0x0000, 0x04C6, 0x0000, /*110 */ + 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, /*118 */ + 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, /*120 */ + 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, /*128 */ + 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, /*130 */ + 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, /*138 */ + 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, /*140 */ + 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, /*148 */ + 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, /*150 */ + 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, /*158 */ + 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, /*160 */ + 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, /*168 */ + 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, /*170 */ + 0x0000, 0x0000, 0x0000, 0x00F0, 0x08A2, 0x3112, 0x0A14, 0x0000, /*178 */ + 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, /*180 */ + 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, /*188 */ + 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, /*190 */ + 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, /*198 */ + 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, /*1A0 */ + 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, /*1A8 */ + 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, /*1B0 */ + 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, /*1B8 */ + 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, /*1C0 */ + 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, /*1C8 */ + 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, /*1D0 */ + 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, /*1D8 */ + 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, /*1E0 */ + 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, /*1E8 */ + 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, /*1F0 */ + 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000 /*1F8 */ }; -static int mvebu_a3700_comphy_smc(unsigned long function, unsigned long lane, - unsigned long mode) +static inline void reg_set(void __iomem *addr, u32 data, u32 mask) { - struct arm_smccc_res res; - s32 ret; + u32 reg_data; - arm_smccc_smc(function, lane, mode, 0, 0, 0, 0, 0, &res); - ret = res.a0; + reg_data = readl(addr); + reg_data &= ~mask; + reg_data |= data; + writel(reg_data, addr); +} + +static inline void reg_set16(void __iomem *addr, u16 data, u16 mask) +{ + u16 reg_data; + + reg_data = readw(addr); + reg_data &= ~mask; + reg_data |= data; + writew(reg_data, addr); +} + +/* PHY selector configures with corresponding modes */ +static int mvebu_a3700_comphy_set_phy_selector(struct mvebu_a3700_comphy_lane *lane) +{ + u32 reg; + + reg = readl(lane->priv->comphy_regs + COMPHY_SELECTOR_PHY_REG); + switch (lane->mode) { + case PHY_MODE_SATA: + /* SATA must be in Lane2 */ + if (lane->id == 2) + reg &= ~COMPHY_SELECTOR_USB3_PHY_SEL_BIT; + else + goto error; + break; + + case PHY_MODE_ETHERNET: + if (lane->id == 0) + reg &= ~COMPHY_SELECTOR_USB3_GBE1_SEL_BIT; + else if (lane->id == 1) + reg &= ~COMPHY_SELECTOR_PCIE_GBE0_SEL_BIT; + else + goto error; + break; + + case PHY_MODE_USB_HOST_SS: + if (lane->id == 2) + reg |= COMPHY_SELECTOR_USB3_PHY_SEL_BIT; + else if (lane->id == 0) + reg |= COMPHY_SELECTOR_USB3_GBE1_SEL_BIT; + else + goto error; + break; + + case PHY_MODE_PCIE: + /* PCIE must be in Lane1 */ + if (lane->id == 1) + reg |= COMPHY_SELECTOR_PCIE_GBE0_SEL_BIT; + else + goto error; + break; - switch (ret) { - case SMCCC_RET_SUCCESS: - return 0; - case SMCCC_RET_NOT_SUPPORTED: - return -EOPNOTSUPP; default: + goto error; + } + + writel(reg, lane->priv->comphy_regs + COMPHY_SELECTOR_PHY_REG); + return 0; +error: + dev_err(lane->dev, "COMPHY[%d] mode[%d] is invalid\n", lane->id, lane->mode); + return -EINVAL; +} + +/* It is only used for SATA and USB3 on comphy lane2. */ +static void comphy_set_indirect(void __iomem *base_addr, u32 offset, u16 data, + u16 mask, bool is_sata) +{ + /* + * When Lane 2 PHY is for USB3, access the PHY registers + * through indirect Address and Data registers: + * INDIR_ACC_PHY_ADDR (RD00E0178h [31:0]), + * INDIR_ACC_PHY_DATA (RD00E017Ch [31:0]), + * within the SATA Host Controller registers, Lane 2 base register + * offset is 0x200 + */ + if (is_sata) + writel(offset, base_addr + COMPHY_LANE2_INDIR_ADDR_OFFSET); + else + writel(USB3PHY_LANE2_REG_BASE_OFFSET + offset, + base_addr + COMPHY_LANE2_INDIR_ADDR_OFFSET); + + reg_set(base_addr + COMPHY_LANE2_INDIR_DATA_OFFSET, data, mask); +} + +/* It is only used for SATA on comphy lane2. */ +static void comphy_sata_set_indirect(void __iomem *base_addr, u32 reg_offset, + u16 data, u16 mask) +{ + comphy_set_indirect(base_addr, reg_offset, data, mask, true); +} + +/* It is only used for USB3 indirect access on comphy lane2. */ +static void comphy_usb3_set_indirect(void __iomem *base_addr, u32 reg_offset, + u16 data, u16 mask) +{ + comphy_set_indirect(base_addr, reg_offset, data, mask, false); +} + +/* It is only used for USB3 direct access not on comphy lane2. */ +static void comphy_usb3_set_direct(void __iomem *base_addr, u32 reg_offset, + u16 data, u16 mask) +{ + reg_set16(base_addr + reg_offset * PHY_SHFT(USB3), data, mask); +} + +static void comphy_gbe_phy_init(void __iomem *gbe_phy_base, bool is_1gbps) +{ + const int fix_arr_sz = ARRAY_SIZE(gbe_phy_init_fix); + int addr, fix_idx; + u16 val; + + fix_idx = 0; + for (addr = 0; addr < 512; addr++) { + /* + * All PHY register values are defined in full for 3.125Gbps + * SERDES speed. The values required for 1.25 Gbps are almost + * the same and only few registers should be "fixed" in + * comparison to 3.125 Gbps values. These register values are + * stored in "gbe_phy_init_fix" array. + */ + if (!is_1gbps && gbe_phy_init_fix[fix_idx].addr == addr) { + /* Use new value */ + val = gbe_phy_init_fix[fix_idx].value; + if (fix_idx < fix_arr_sz) + fix_idx++; + } else { + val = gbe_phy_init[addr]; + } + + reg_set16(GBE_PHY_ADDR(gbe_phy_base, addr), val, 0xFFFF); + } +} + +static int mvebu_a3700_comphy_sata_power_on(struct mvebu_a3700_comphy_lane *lane) +{ + void __iomem *sata_phy_base = lane->priv->sata_usb3_phy_regs; + u32 offset, data = 0, ref_clk; + int ret; + + /* Configure phy selector for SATA */ + ret = mvebu_a3700_comphy_set_phy_selector(lane); + if (ret) + return ret; + + /* Clear phy isolation mode to make it work in normal mode */ + offset = SATAPHY_LANE2_REG_BASE_OFFSET + COMPHY_ISOLATION_CTRL_REG; + comphy_sata_set_indirect(sata_phy_base, offset, 0, PHY_ISOLATE_MODE); + + /* 0. Check the Polarity invert bits */ + if (lane->invert_tx) + data |= TXD_INVERT_BIT; + if (lane->invert_rx) + data |= RXD_INVERT_BIT; + + offset = SATAPHY_LANE2_REG_BASE_OFFSET + COMPHY_SYNC_PATTERN_REG; + comphy_sata_set_indirect(sata_phy_base, offset, data, TXD_INVERT_BIT | + RXD_INVERT_BIT); + + /* 1. Select 40-bit data width */ + offset = SATAPHY_LANE2_REG_BASE_OFFSET + COMPHY_LOOPBACK_REG0; + comphy_sata_set_indirect(sata_phy_base, offset, DATA_WIDTH_40BIT, + SEL_DATA_WIDTH_MASK); + + /* 2. Select reference clock(25M) and PHY mode (SATA) */ + offset = SATAPHY_LANE2_REG_BASE_OFFSET + COMPHY_POWER_PLL_CTRL; + if (lane->priv->xtal_is_40m) + ref_clk = REF_CLOCK_SPEED_40M; + else + ref_clk = REF_CLOCK_SPEED_25M; + + comphy_sata_set_indirect(sata_phy_base, offset, ref_clk | COMPHY_MODE_SATA, + REF_FREF_SEL_MASK | COMPHY_MODE_MASK); + + /* 3. Use maximum PLL rate (no power save) */ + offset = SATAPHY_LANE2_REG_BASE_OFFSET + COMPHY_KVCO_CAL_CTRL; + comphy_sata_set_indirect(sata_phy_base, offset, USE_MAX_PLL_RATE_BIT, + USE_MAX_PLL_RATE_BIT); + + /* 4. Reset reserved bit */ + comphy_sata_set_indirect(sata_phy_base, COMPHY_RESERVED_REG, 0, + PHYCTRL_FRM_PIN_BIT); + + /* 5. Set vendor-specific configuration (It is done in sata driver) */ + /* XXX: in U-Boot below sequence was executed in this place, in Linux + * not. Now it is done only in U-Boot before this comphy + * initialization - tests shows that it works ok, but in case of any + * future problem it is left for reference. + * reg_set(MVEBU_REGS_BASE + 0xe00a0, 0, 0xffffffff); + * reg_set(MVEBU_REGS_BASE + 0xe00a4, BIT(6), BIT(6)); + */ + + /* Wait for > 55 us to allow PLL be enabled */ + udelay(PLL_SET_DELAY_US); + + /* Polling status */ + writel(SATAPHY_LANE2_REG_BASE_OFFSET + COMPHY_LOOPBACK_REG0, + sata_phy_base + COMPHY_LANE2_INDIR_ADDR_OFFSET); + + ret = readl_poll_timeout(sata_phy_base + COMPHY_LANE2_INDIR_DATA_OFFSET, + data, data & PLL_READY_TX_BIT, + COMPHY_PLL_SLEEP, COMPHY_PLL_TIMEOUT); + if (ret) { + dev_err(lane->dev, "Failed to lock SATA PLL\n"); + return ret; + } + + return 0; +} + +static int mvebu_a3700_comphy_ethernet_power_on(struct mvebu_a3700_comphy_lane *lane) +{ + void __iomem *comphy_base = lane->priv->comphy_regs; + void __iomem *gbe_phy_base; + u32 mask, data; + int ret; + + /* Set selector */ + ret = mvebu_a3700_comphy_set_phy_selector(lane); + if (ret) + return ret; + + /* GBE PHY Base address + * COMPHY Lane0 -- USB3/GBE1 + * COMPHY Lane1 -- PCIe/GBE0 + */ + if (lane->id == 0) { + /* Get usb3 and gbe register base address */ + gbe_phy_base = lane->priv->usb3_gbe1_phy_regs; + } else { + /* Get pcie and gbe register base address */ + gbe_phy_base = lane->priv->pcie_gbe0_phy_regs; + } + + /* + * 1. Reset PHY by setting PHY input port PIN_RESET=1. + * 2. Set PHY input port PIN_TX_IDLE=1, PIN_PU_IVREF=1 to keep + * PHY TXP/TXN output to idle state during PHY initialization + * 3. Set PHY input port PIN_PU_PLL=0, PIN_PU_RX=0, PIN_PU_TX=0. + */ + data = PIN_PU_IVEREF_BIT | PIN_TX_IDLE_BIT | PIN_RESET_COMPHY_BIT; + mask = PIN_RESET_CORE_BIT | PIN_PU_PLL_BIT | PIN_PU_RX_BIT | + PIN_PU_TX_BIT | PHY_RX_INIT_BIT; + reg_set(comphy_base + COMPHY_PHY_CFG1_OFFSET(lane->id), data, mask); + + /* 4. Release reset to the PHY by setting PIN_RESET=0. */ + data = 0; + mask = PIN_RESET_COMPHY_BIT; + reg_set(comphy_base + COMPHY_PHY_CFG1_OFFSET(lane->id), data, mask); + + /* + * 5. Set PIN_PHY_GEN_TX[3:0] and PIN_PHY_GEN_RX[3:0] to decide COMPHY + * bit rate + */ + switch (lane->submode) { + case PHY_INTERFACE_MODE_SGMII: + case PHY_INTERFACE_MODE_1000BASEX: + /* SGMII 1G, SerDes speed 1.25G */ + data |= SERDES_SPEED_1_25_G << GEN_RX_SEL_OFFSET; + data |= SERDES_SPEED_1_25_G << GEN_TX_SEL_OFFSET; + break; + case PHY_INTERFACE_MODE_2500BASEX: + /* 2500Base-X, SerDes speed 3.125G */ + data |= SERDES_SPEED_2_5_G << GEN_RX_SEL_OFFSET; + data |= SERDES_SPEED_2_5_G << GEN_TX_SEL_OFFSET; + break; + default: + /* Other rates are not supported */ + dev_err(lane->dev, "unsupported phy speed %d on comphy lane%d\n", + lane->submode, lane->id); return -EINVAL; } + mask = GEN_RX_SEL_MASK | GEN_TX_SEL_MASK; + reg_set(comphy_base + COMPHY_PHY_CFG1_OFFSET(lane->id), data, mask); + + /* + * 6. Wait 10mS for bandgap and reference clocks to stabilize; then + * start SW programming. + */ + mdelay(10); + + /* 7. Program COMPHY register PHY_MODE */ + data = COMPHY_MODE_SERDES; + mask = COMPHY_MODE_MASK; + reg_set16(GBE_PHY_ADDR(gbe_phy_base, COMPHY_POWER_PLL_CTRL), data, mask); + + /* + * 8. Set COMPHY register REFCLK_SEL to select the correct REFCLK + * source + */ + data = 0; + mask = PHY_REF_CLK_SEL; + reg_set16(GBE_PHY_ADDR(gbe_phy_base, COMPHY_MISC_REG0_ADDR), data, mask); + + /* + * 9. Set correct reference clock frequency in COMPHY register + * REF_FREF_SEL. + */ + if (lane->priv->xtal_is_40m) + data = REF_CLOCK_SPEED_50M; + else + data = REF_CLOCK_SPEED_25M; + + mask = REF_FREF_SEL_MASK; + reg_set16(GBE_PHY_ADDR(gbe_phy_base, COMPHY_POWER_PLL_CTRL), data, mask); + + /* 10. Program COMPHY register PHY_GEN_MAX[1:0] + * This step is mentioned in the flow received from verification team. + * However the PHY_GEN_MAX value is only meaningful for other interfaces + * (not SERDES). For instance, it selects SATA speed 1.5/3/6 Gbps or PCIe + * speed 2.5/5 Gbps + */ + + /* + * 11. Program COMPHY register SEL_BITS to set correct parallel data + * bus width + */ + data = DATA_WIDTH_10BIT; + mask = SEL_DATA_WIDTH_MASK; + reg_set16(GBE_PHY_ADDR(gbe_phy_base, COMPHY_LOOPBACK_REG0), data, mask); + + /* + * 12. As long as DFE function needs to be enabled in any mode, + * COMPHY register DFE_UPDATE_EN[5:0] shall be programmed to 0x3F + * for real chip during COMPHY power on. + * The step 14 exists (and empty) in the original initialization flow + * obtained from the verification team. According to the functional + * specification DFE_UPDATE_EN already has the default value 0x3F + */ + + /* + * 13. Program COMPHY GEN registers. + * These registers should be programmed based on the lab testing result + * to achieve optimal performance. Please contact the CEA group to get + * the related GEN table during real chip bring-up. We only required to + * run though the entire registers programming flow defined by + * "comphy_gbe_phy_init" when the REF clock is 40 MHz. For REF clock + * 25 MHz the default values stored in PHY registers are OK. + */ + dev_dbg(lane->dev, "Running C-DPI phy init %s mode\n", + lane->submode == PHY_INTERFACE_MODE_2500BASEX ? "2G5" : "1G"); + if (lane->priv->xtal_is_40m) + comphy_gbe_phy_init(gbe_phy_base, lane->submode != PHY_INTERFACE_MODE_2500BASEX); + + /* + * 14. [Simulation Only] should not be used for real chip. + * By pass power up calibration by programming EXT_FORCE_CAL_DONE + * (R02h[9]) to 1 to shorten COMPHY simulation time. + */ + + /* + * 15. [Simulation Only: should not be used for real chip] + * Program COMPHY register FAST_DFE_TIMER_EN=1 to shorten RX training + * simulation time. + */ + + /* + * 16. Check the PHY Polarity invert bit + */ + data = 0x0; + if (lane->invert_tx) + data |= TXD_INVERT_BIT; + if (lane->invert_rx) + data |= RXD_INVERT_BIT; + mask = TXD_INVERT_BIT | RXD_INVERT_BIT; + reg_set16(GBE_PHY_ADDR(gbe_phy_base, COMPHY_SYNC_PATTERN_REG), data, mask); + + /* + * 17. Set PHY input ports PIN_PU_PLL, PIN_PU_TX and PIN_PU_RX to 1 to + * start PHY power up sequence. All the PHY register programming should + * be done before PIN_PU_PLL=1. There should be no register programming + * for normal PHY operation from this point. + */ + reg_set(comphy_base + COMPHY_PHY_CFG1_OFFSET(lane->id), + PIN_PU_PLL_BIT | PIN_PU_RX_BIT | PIN_PU_TX_BIT, + PIN_PU_PLL_BIT | PIN_PU_RX_BIT | PIN_PU_TX_BIT); + + /* + * 18. Wait for PHY power up sequence to finish by checking output ports + * PIN_PLL_READY_TX=1 and PIN_PLL_READY_RX=1. + */ + ret = readl_poll_timeout(comphy_base + COMPHY_PHY_STATUS_OFFSET(lane->id), + data, (data & (PHY_PLL_READY_TX_BIT | PHY_PLL_READY_RX_BIT)) == + (PHY_PLL_READY_TX_BIT | PHY_PLL_READY_RX_BIT), + COMPHY_PLL_SLEEP, COMPHY_PLL_TIMEOUT); + if (ret) { + dev_err(lane->dev, "Failed to lock PLL for SERDES PHY %d\n", lane->id); + return ret; + } + + /* + * 19. Set COMPHY input port PIN_TX_IDLE=0 + */ + reg_set(comphy_base + COMPHY_PHY_CFG1_OFFSET(lane->id), + 0x0, PIN_TX_IDLE_BIT); + + /* + * 20. After valid data appear on PIN_RXDATA bus, set PIN_RX_INIT=1. To + * start RX initialization. PIN_RX_INIT_DONE will be cleared to 0 by the + * PHY After RX initialization is done, PIN_RX_INIT_DONE will be set to + * 1 by COMPHY Set PIN_RX_INIT=0 after PIN_RX_INIT_DONE= 1. Please + * refer to RX initialization part for details. + */ + reg_set(comphy_base + COMPHY_PHY_CFG1_OFFSET(lane->id), + PHY_RX_INIT_BIT, PHY_RX_INIT_BIT); + + ret = readl_poll_timeout(comphy_base + COMPHY_PHY_STATUS_OFFSET(lane->id), + data, (data & (PHY_PLL_READY_TX_BIT | PHY_PLL_READY_RX_BIT)) == + (PHY_PLL_READY_TX_BIT | PHY_PLL_READY_RX_BIT), + COMPHY_PLL_SLEEP, COMPHY_PLL_TIMEOUT); + if (ret) { + dev_err(lane->dev, "Failed to lock PLL for SERDES PHY %d\n", lane->id); + return ret; + } + + ret = readl_poll_timeout(comphy_base + COMPHY_PHY_STATUS_OFFSET(lane->id), + data, data & PHY_RX_INIT_DONE_BIT, + COMPHY_PLL_SLEEP, COMPHY_PLL_TIMEOUT); + if (ret) { + dev_err(lane->dev, "Failed to init RX of SERDES PHY %d\n", lane->id); + return ret; + } + + return 0; +} + +static int mvebu_a3700_comphy_usb3_power_on(struct mvebu_a3700_comphy_lane *lane) +{ + void (*usb3_reg_set)(void __iomem *addr, u32 offset, u16 data, u16 mask); + u32 mask, data, cfg, ref_clk; + void __iomem *usb3_phy_base; + int ret; + + /* Set phy seclector */ + ret = mvebu_a3700_comphy_set_phy_selector(lane); + if (ret) + return ret; + + /* Set usb3 reg access func, Lane2 is indirect access */ + if (lane->id == 2) { + usb3_reg_set = &comphy_usb3_set_indirect; + usb3_phy_base = lane->priv->sata_usb3_phy_regs; + } else { + /* Get the direct access register resource and map */ + usb3_reg_set = &comphy_usb3_set_direct; + usb3_phy_base = lane->priv->usb3_gbe1_phy_regs; + } + + /* + * 0. Set PHY OTG Control(0x5d034), bit 4, Power up OTG module The + * register belong to UTMI module, so it is set in UTMI phy driver. + */ + + /* + * 1. Set PRD_TXDEEMPH (3.5db de-emph) + */ + mask = PRD_TXDEEMPH0_MASK | PRD_TXMARGIN_MASK | PRD_TXSWING_MASK | + CFG_TX_ALIGN_POS_MASK; + usb3_reg_set(usb3_phy_base, COMPHY_REG_LANE_CFG0_ADDR, PRD_TXDEEMPH0_MASK, + mask); + + /* + * 2. Set BIT0: enable transmitter in high impedance mode + * Set BIT[3:4]: delay 2 clock cycles for HiZ off latency + * Set BIT6: Tx detect Rx at HiZ mode + * Unset BIT15: set to 0 to set USB3 De-emphasize level to -3.5db + * together with bit 0 of COMPHY_REG_LANE_CFG0_ADDR register + */ + mask = PRD_TXDEEMPH1_MASK | TX_DET_RX_MODE | GEN2_TX_DATA_DLY_MASK | + TX_ELEC_IDLE_MODE_EN; + data = TX_DET_RX_MODE | GEN2_TX_DATA_DLY_DEFT | TX_ELEC_IDLE_MODE_EN; + usb3_reg_set(usb3_phy_base, COMPHY_REG_LANE_CFG1_ADDR, data, mask); + + /* + * 3. Set Spread Spectrum Clock Enabled + */ + usb3_reg_set(usb3_phy_base, COMPHY_REG_LANE_CFG4_ADDR, + SPREAD_SPECTRUM_CLK_EN, SPREAD_SPECTRUM_CLK_EN); + + /* + * 4. Set Override Margining Controls From the MAC: + * Use margining signals from lane configuration + */ + usb3_reg_set(usb3_phy_base, COMPHY_REG_TEST_MODE_CTRL_ADDR, + MODE_MARGIN_OVERRIDE, 0xFFFF); + + /* + * 5. Set Lane-to-Lane Bundle Clock Sampling Period = per PCLK cycles + * set Mode Clock Source = PCLK is generated from REFCLK + */ + usb3_reg_set(usb3_phy_base, COMPHY_REG_GLOB_CLK_SRC_LO_ADDR, 0x0, + (MODE_CLK_SRC | BUNDLE_PERIOD_SEL | BUNDLE_PERIOD_SCALE | + BUNDLE_SAMPLE_CTRL | PLL_READY_DLY)); + + /* + * 6. Set G2 Spread Spectrum Clock Amplitude at 4K + */ + usb3_reg_set(usb3_phy_base, COMPHY_REG_GEN2_SET_2, + G2_TX_SSC_AMP_VALUE_20, G2_TX_SSC_AMP_MASK); + + /* + * 7. Unset G3 Spread Spectrum Clock Amplitude + * set G3 TX and RX Register Master Current Select + */ + mask = G3_TX_SSC_AMP_MASK | G3_VREG_RXTX_MAS_ISET_MASK | + RSVD_PH03FH_6_0_MASK; + usb3_reg_set(usb3_phy_base, COMPHY_REG_GEN2_SET_3, + G3_VREG_RXTX_MAS_ISET_60U, mask); + + /* + * 8. Check crystal jumper setting and program the Power and PLL Control + * accordingly Change RX wait + */ + if (lane->priv->xtal_is_40m) { + ref_clk = REF_CLOCK_SPEED_40M; + cfg = CFG_PM_RXDLOZ_WAIT_12_UNIT; + } else { + ref_clk = USB3_REF_CLOCK_SPEED_25M; + cfg = CFG_PM_RXDLOZ_WAIT_7_UNIT; + } + + mask = PU_IVREF_BIT | PU_PLL_BIT | PU_RX_BIT | PU_TX_BIT | + PU_TX_INTP_BIT | PU_DFE_BIT | PLL_LOCK_BIT | COMPHY_MODE_MASK | + REF_FREF_SEL_MASK; + data = PU_IVREF_BIT | PU_PLL_BIT | PU_RX_BIT | PU_TX_BIT | + PU_TX_INTP_BIT | PU_DFE_BIT | COMPHY_MODE_USB3 | ref_clk; + usb3_reg_set(usb3_phy_base, COMPHY_POWER_PLL_CTRL, data, mask); + + mask = CFG_PM_OSCCLK_WAIT_MASK | CFG_PM_RXDEN_WAIT_MASK | + CFG_PM_RXDLOZ_WAIT_MASK; + data = CFG_PM_RXDEN_WAIT_1_UNIT | cfg; + usb3_reg_set(usb3_phy_base, COMPHY_REG_PWR_MGM_TIM1_ADDR, data, mask); + + /* + * 9. Enable idle sync + */ + data = UNIT_CTRL_DEFAULT_VALUE | IDLE_SYNC_EN; + usb3_reg_set(usb3_phy_base, COMPHY_REG_UNIT_CTRL_ADDR, data, 0xFFFF); + + /* + * 10. Enable the output of 500M clock + */ + data = MISC_REG0_DEFAULT_VALUE | CLK500M_EN; + usb3_reg_set(usb3_phy_base, COMPHY_MISC_REG0_ADDR, data, 0xFFFF); + + /* + * 11. Set 20-bit data width + */ + usb3_reg_set(usb3_phy_base, COMPHY_LOOPBACK_REG0, DATA_WIDTH_20BIT, 0xFFFF); + + /* + * 12. Override Speed_PLL value and use MAC PLL + */ + usb3_reg_set(usb3_phy_base, COMPHY_KVCO_CAL_CTRL, + (SPEED_PLL_VALUE_16 | USE_MAX_PLL_RATE_BIT), + 0xFFFF); + + /* + * 13. Check the Polarity invert bit + */ + data = 0U; + if (lane->invert_tx) + data |= TXD_INVERT_BIT; + if (lane->invert_rx) + data |= RXD_INVERT_BIT; + mask = TXD_INVERT_BIT | RXD_INVERT_BIT; + usb3_reg_set(usb3_phy_base, COMPHY_SYNC_PATTERN_REG, data, mask); + + /* + * 14. Set max speed generation to USB3.0 5Gbps + */ + usb3_reg_set(usb3_phy_base, COMPHY_SYNC_MASK_GEN_REG, PHY_GEN_USB3_5G, + PHY_GEN_MAX_MASK); + + /* + * 15. Set capacitor value for FFE gain peaking to 0xF + */ + usb3_reg_set(usb3_phy_base, COMPHY_REG_GEN3_SETTINGS_3, + COMPHY_GEN_FFE_CAP_SEL_VALUE, COMPHY_GEN_FFE_CAP_SEL_MASK); + + /* + * 16. Release SW reset + */ + data = MODE_CORE_CLK_FREQ_SEL | MODE_PIPE_WIDTH_32 | MODE_REFDIV_BY_4; + usb3_reg_set(usb3_phy_base, COMPHY_REG_GLOB_PHY_CTRL0_ADDR, data, 0xFFFF); + + /* Wait for > 55 us to allow PCLK be enabled */ + udelay(PLL_SET_DELAY_US); + + if (lane->id == 2) { + data = USB3PHY_LANE2_REG_BASE_OFFSET + COMPHY_REG_LANE_STATUS1_ADDR; + writel(data, usb3_phy_base + COMPHY_LANE2_INDIR_ADDR_OFFSET); + + ret = readl_poll_timeout(usb3_phy_base + COMPHY_LANE2_INDIR_DATA_OFFSET, + data, data & TXDCLK_PCLK_EN, + COMPHY_PLL_SLEEP, COMPHY_PLL_TIMEOUT); + } else { + ret = readw_poll_timeout(usb3_phy_base + LANE_STATUS1_ADDR(USB3), + data, data & TXDCLK_PCLK_EN, + COMPHY_PLL_SLEEP, COMPHY_PLL_TIMEOUT); + } + if (ret) { + dev_err(lane->dev, "Failed to lock USB3 PLL\n"); + return ret; + } + + return 0; +} + +static int mvebu_a3700_comphy_pcie_power_on(struct mvebu_a3700_comphy_lane *lane) +{ + void __iomem *pcie_phy_base = lane->priv->pcie_gbe0_phy_regs; + u32 mask, data; + u32 ref_clk; + int ret; + + /* Configure phy selector for PCIe */ + ret = mvebu_a3700_comphy_set_phy_selector(lane); + if (ret) + return ret; + + /* 1. Enable max PLL. */ + reg_set16(pcie_phy_base + LANE_CFG1_ADDR(PCIE), + USE_MAX_PLL_RATE_EN, USE_MAX_PLL_RATE_EN); + + /* 2. Select 20 bit SERDES interface. */ + reg_set16(pcie_phy_base + GLOB_CLK_SRC_LO_ADDR(PCIE), + CFG_SEL_20B, CFG_SEL_20B); + + /* 3. Force to use reg setting for PCIe mode */ + reg_set16(pcie_phy_base + MISC_REG1_ADDR(PCIE), + SEL_BITS_PCIE_FORCE, SEL_BITS_PCIE_FORCE); + + /* 4. Change RX wait */ + reg_set16(pcie_phy_base + PWR_MGM_TIM1_ADDR(PCIE), + CFG_PM_RXDEN_WAIT_1_UNIT | CFG_PM_RXDLOZ_WAIT_12_UNIT, + (CFG_PM_OSCCLK_WAIT_MASK | CFG_PM_RXDEN_WAIT_MASK | + CFG_PM_RXDLOZ_WAIT_MASK)); + + /* 5. Enable idle sync */ + reg_set16(pcie_phy_base + UNIT_CTRL_ADDR(PCIE), + UNIT_CTRL_DEFAULT_VALUE | IDLE_SYNC_EN, 0xFFFF); + + /* 6. Enable the output of 100M/125M/500M clock */ + reg_set16(pcie_phy_base + MISC_REG0_ADDR(PCIE), + MISC_REG0_DEFAULT_VALUE | CLK500M_EN | TXDCLK_2X_SEL | CLK100M_125M_EN, + 0xFFFF); + + /* + * 7. Enable TX, PCIE global register, 0xd0074814, it is done in + * PCI-E driver + */ + + /* + * 8. Check crystal jumper setting and program the Power and PLL + * Control accordingly + */ + + if (lane->priv->xtal_is_40m) + ref_clk = REF_CLOCK_SPEED_40M; + else + ref_clk = PCIE_REF_CLOCK_SPEED_25M; + + reg_set16(pcie_phy_base + PWR_PLL_CTRL_ADDR(PCIE), + (PU_IVREF_BIT | PU_PLL_BIT | PU_RX_BIT | PU_TX_BIT | + PU_TX_INTP_BIT | PU_DFE_BIT | ref_clk | COMPHY_MODE_PCIE), + 0xFFFF); + + /* 9. Override Speed_PLL value and use MAC PLL */ + reg_set16(pcie_phy_base + KVCO_CAL_CTRL_ADDR(PCIE), + SPEED_PLL_VALUE_16 | USE_MAX_PLL_RATE_BIT, 0xFFFF); + + /* 10. Check the Polarity invert bit */ + data = 0U; + if (lane->invert_tx) + data |= TXD_INVERT_BIT; + if (lane->invert_rx) + data |= RXD_INVERT_BIT; + mask = TXD_INVERT_BIT | RXD_INVERT_BIT; + reg_set16(pcie_phy_base + SYNC_PATTERN_REG_ADDR(PCIE), data, mask); + + /* 11. Release SW reset */ + reg_set16(pcie_phy_base + GLOB_PHY_CTRL0_ADDR(PCIE), + MODE_CORE_CLK_FREQ_SEL | MODE_PIPE_WIDTH_32, + SOFT_RESET | MODE_REFDIV); + + /* Wait for > 55 us to allow PCLK be enabled */ + udelay(PLL_SET_DELAY_US); + + ret = readw_poll_timeout(pcie_phy_base + LANE_STATUS1_ADDR(PCIE), + data, data & TXDCLK_PCLK_EN, + COMPHY_PLL_SLEEP, COMPHY_PLL_TIMEOUT); + if (ret) { + dev_err(lane->dev, "Failed to lock PCIE PLL\n"); + return ret; + } + + return 0; } -static int mvebu_a3700_comphy_get_fw_mode(int lane, +static void mvebu_a3700_comphy_usb3_power_off(struct mvebu_a3700_comphy_lane *lane) +{ + /* + * Currently the USB3 MAC sets the USB3 PHY to low state, so we do not + * need to power off USB3 PHY again. + */ +} + +static void mvebu_a3700_comphy_sata_power_off(struct mvebu_a3700_comphy_lane *lane) +{ + void __iomem *sata_phy_base = lane->priv->sata_usb3_phy_regs; + u32 offset; + + /* Set phy isolation mode */ + offset = SATAPHY_LANE2_REG_BASE_OFFSET + COMPHY_ISOLATION_CTRL_REG; + comphy_sata_set_indirect(sata_phy_base, offset, PHY_ISOLATE_MODE, + PHY_ISOLATE_MODE); + + /* Power off PLL, Tx, Rx */ + offset = SATAPHY_LANE2_REG_BASE_OFFSET + COMPHY_POWER_PLL_CTRL; + comphy_sata_set_indirect(sata_phy_base, offset, 0, + PU_PLL_BIT | PU_RX_BIT | PU_TX_BIT); +} + +static void mvebu_a3700_comphy_ethernet_power_off(struct mvebu_a3700_comphy_lane *lane) +{ + void __iomem *comphy_base = lane->priv->comphy_regs; + u32 mask, data; + + data = PIN_RESET_CORE_BIT | PIN_RESET_COMPHY_BIT | PIN_PU_IVEREF_BIT | PHY_RX_INIT_BIT; + mask = data; + reg_set(comphy_base + COMPHY_PHY_CFG1_OFFSET(lane->id), data, mask); +} + +static void mvebu_a3700_comphy_pcie_power_off(struct mvebu_a3700_comphy_lane *lane) +{ + /* Currently do nothing */ +} + +static bool mvebu_a3700_comphy_check_mode(int lane, enum phy_mode mode, int submode) { @@ -122,7 +1144,7 @@ static int mvebu_a3700_comphy_get_fw_mode(int lane, /* Unused PHY mux value is 0x0 */ if (mode == PHY_MODE_INVALID) - return -EINVAL; + return false; for (i = 0; i < n; i++) { if (mvebu_a3700_comphy_modes[i].lane == lane && @@ -132,25 +1154,19 @@ static int mvebu_a3700_comphy_get_fw_mode(int lane, } if (i == n) - return -EINVAL; + return false; - return mvebu_a3700_comphy_modes[i].fw_mode; + return true; } static int mvebu_a3700_comphy_set_mode(struct phy *phy, enum phy_mode mode, int submode) { struct mvebu_a3700_comphy_lane *lane = phy_get_drvdata(phy); - int fw_mode; - - if (submode == PHY_INTERFACE_MODE_1000BASEX) - submode = PHY_INTERFACE_MODE_SGMII; - fw_mode = mvebu_a3700_comphy_get_fw_mode(lane->id, mode, - submode); - if (fw_mode < 0) { + if (!mvebu_a3700_comphy_check_mode(lane->id, mode, submode)) { dev_err(lane->dev, "invalid COMPHY mode\n"); - return fw_mode; + return -EINVAL; } /* Just remember the mode, ->power_on() will do the real setup */ @@ -163,71 +1179,52 @@ static int mvebu_a3700_comphy_set_mode(struct phy *phy, enum phy_mode mode, static int mvebu_a3700_comphy_power_on(struct phy *phy) { struct mvebu_a3700_comphy_lane *lane = phy_get_drvdata(phy); - u32 fw_param; - int fw_mode; - int fw_port; - int ret; - fw_mode = mvebu_a3700_comphy_get_fw_mode(lane->id, - lane->mode, lane->submode); - if (fw_mode < 0) { + if (!mvebu_a3700_comphy_check_mode(lane->id, lane->mode, lane->submode)) { dev_err(lane->dev, "invalid COMPHY mode\n"); - return fw_mode; + return -EINVAL; } switch (lane->mode) { case PHY_MODE_USB_HOST_SS: dev_dbg(lane->dev, "set lane %d to USB3 host mode\n", lane->id); - fw_param = COMPHY_FW_MODE(fw_mode); - break; + return mvebu_a3700_comphy_usb3_power_on(lane); case PHY_MODE_SATA: dev_dbg(lane->dev, "set lane %d to SATA mode\n", lane->id); - fw_param = COMPHY_FW_MODE(fw_mode); - break; + return mvebu_a3700_comphy_sata_power_on(lane); case PHY_MODE_ETHERNET: - fw_port = (lane->id == 0) ? 1 : 0; - switch (lane->submode) { - case PHY_INTERFACE_MODE_SGMII: - dev_dbg(lane->dev, "set lane %d to SGMII mode\n", - lane->id); - fw_param = COMPHY_FW_NET(fw_mode, fw_port, - COMPHY_FW_SPEED_1_25G); - break; - case PHY_INTERFACE_MODE_2500BASEX: - dev_dbg(lane->dev, "set lane %d to 2500BASEX mode\n", - lane->id); - fw_param = COMPHY_FW_NET(fw_mode, fw_port, - COMPHY_FW_SPEED_3_125G); - break; - default: - dev_err(lane->dev, "unsupported PHY submode (%d)\n", - lane->submode); - return -ENOTSUPP; - } - break; + dev_dbg(lane->dev, "set lane %d to Ethernet mode\n", lane->id); + return mvebu_a3700_comphy_ethernet_power_on(lane); case PHY_MODE_PCIE: dev_dbg(lane->dev, "set lane %d to PCIe mode\n", lane->id); - fw_param = COMPHY_FW_PCIE(fw_mode, COMPHY_FW_SPEED_5G, - phy->attrs.bus_width); - break; + return mvebu_a3700_comphy_pcie_power_on(lane); default: dev_err(lane->dev, "unsupported PHY mode (%d)\n", lane->mode); - return -ENOTSUPP; + return -EOPNOTSUPP; } - - ret = mvebu_a3700_comphy_smc(COMPHY_SIP_POWER_ON, lane->id, fw_param); - if (ret == -EOPNOTSUPP) - dev_err(lane->dev, - "unsupported SMC call, try updating your firmware\n"); - - return ret; } static int mvebu_a3700_comphy_power_off(struct phy *phy) { struct mvebu_a3700_comphy_lane *lane = phy_get_drvdata(phy); - return mvebu_a3700_comphy_smc(COMPHY_SIP_POWER_OFF, lane->id, 0); + switch (lane->id) { + case 0: + mvebu_a3700_comphy_usb3_power_off(lane); + mvebu_a3700_comphy_ethernet_power_off(lane); + return 0; + case 1: + mvebu_a3700_comphy_pcie_power_off(lane); + mvebu_a3700_comphy_ethernet_power_off(lane); + return 0; + case 2: + mvebu_a3700_comphy_usb3_power_off(lane); + mvebu_a3700_comphy_sata_power_off(lane); + return 0; + default: + dev_err(lane->dev, "invalid COMPHY mode\n"); + return -EINVAL; + } } static const struct phy_ops mvebu_a3700_comphy_ops = { @@ -256,13 +1253,68 @@ static struct phy *mvebu_a3700_comphy_xlate(struct device *dev, return ERR_PTR(-EINVAL); } + lane->invert_tx = args->args[1] & BIT(0); + lane->invert_rx = args->args[1] & BIT(1); + return phy; } static int mvebu_a3700_comphy_probe(struct platform_device *pdev) { + struct mvebu_a3700_comphy_priv *priv; struct phy_provider *provider; struct device_node *child; + struct resource *res; + struct clk *clk; + int ret; + + priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "comphy"); + priv->comphy_regs = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(priv->comphy_regs)) + return PTR_ERR(priv->comphy_regs); + + res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "lane1_pcie_gbe"); + priv->pcie_gbe0_phy_regs = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(priv->pcie_gbe0_phy_regs)) + return PTR_ERR(priv->pcie_gbe0_phy_regs); + + res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "lane0_usb3_gbe"); + priv->usb3_gbe1_phy_regs = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(priv->usb3_gbe1_phy_regs)) + return PTR_ERR(priv->usb3_gbe1_phy_regs); + + res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "lane2_sata_usb3"); + priv->sata_usb3_phy_regs = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(priv->sata_usb3_phy_regs)) + return PTR_ERR(priv->sata_usb3_phy_regs); + + /* + * Driver needs to know if reference xtal clock is 40MHz or 25MHz. + * Old DT bindings do not have xtal clk present. So do not fail here + * and expects that default 25MHz reference clock is used. + */ + clk = clk_get(&pdev->dev, "xtal"); + if (IS_ERR(clk)) { + if (PTR_ERR(clk) == -EPROBE_DEFER) + return -EPROBE_DEFER; + dev_warn(&pdev->dev, "missing 'xtal' clk (%ld)\n", PTR_ERR(clk)); + } else { + ret = clk_prepare_enable(clk); + if (ret) { + dev_warn(&pdev->dev, "enabling xtal clk failed (%d)\n", ret); + } else { + if (clk_get_rate(clk) == 40000000) + priv->xtal_is_40m = true; + clk_disable_unprepare(clk); + } + clk_put(clk); + } + + dev_set_drvdata(&pdev->dev, priv); for_each_available_child_of_node(pdev->dev.of_node, child) { struct mvebu_a3700_comphy_lane *lane; @@ -277,7 +1329,7 @@ static int mvebu_a3700_comphy_probe(struct platform_device *pdev) continue; } - if (lane_id >= MVEBU_A3700_COMPHY_LANES) { + if (lane_id >= 3) { dev_err(&pdev->dev, "invalid 'reg' property\n"); continue; } @@ -295,11 +1347,20 @@ static int mvebu_a3700_comphy_probe(struct platform_device *pdev) return PTR_ERR(phy); } + lane->priv = priv; lane->dev = &pdev->dev; lane->mode = PHY_MODE_INVALID; lane->submode = PHY_INTERFACE_MODE_NA; lane->id = lane_id; + lane->invert_tx = false; + lane->invert_rx = false; phy_set_drvdata(phy, lane); + + /* + * To avoid relying on the bootloader/firmware configuration, + * power off all comphys. + */ + mvebu_a3700_comphy_power_off(phy); } provider = devm_of_phy_provider_register(&pdev->dev, @@ -323,5 +1384,6 @@ static struct platform_driver mvebu_a3700_comphy_driver = { module_platform_driver(mvebu_a3700_comphy_driver); MODULE_AUTHOR("Miquèl Raynal "); +MODULE_AUTHOR("Pali Rohár "); MODULE_DESCRIPTION("Common PHY driver for A3700"); MODULE_LICENSE("GPL v2"); From patchwork Thu Oct 28 18:42:39 2021 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 8bit X-Patchwork-Submitter: =?utf-8?q?Marek_Beh=C3=BAn?= X-Patchwork-Id: 12590887 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from mail.kernel.org (mail.kernel.org [198.145.29.99]) by smtp.lore.kernel.org (Postfix) with ESMTP id 8C503C433F5 for ; Thu, 28 Oct 2021 18:42:59 +0000 (UTC) Received: from bombadil.infradead.org (bombadil.infradead.org [198.137.202.133]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by mail.kernel.org (Postfix) with ESMTPS id 5C31A61040 for ; Thu, 28 Oct 2021 18:42:59 +0000 (UTC) DMARC-Filter: OpenDMARC Filter v1.4.1 mail.kernel.org 5C31A61040 Authentication-Results: mail.kernel.org; dmarc=fail (p=none dis=none) header.from=kernel.org Authentication-Results: mail.kernel.org; spf=none smtp.mailfrom=lists.infradead.org DKIM-Signature: v=1; a=rsa-sha256; q=dns/txt; c=relaxed/relaxed; d=lists.infradead.org; s=bombadil.20210309; h=Sender: Content-Transfer-Encoding:Content-Type:List-Subscribe:List-Help:List-Post: List-Archive:List-Unsubscribe:List-Id:MIME-Version:References:In-Reply-To: Message-Id:Date:Subject:Cc:To:From:Reply-To:Content-ID:Content-Description: Resent-Date:Resent-From:Resent-Sender:Resent-To:Resent-Cc:Resent-Message-ID: List-Owner; bh=pVdBsuKYjJUB+uIpQQaqSDdrMI3+UnkaWuE36lUbm30=; b=KNOF2Dwy4Qyy2D DRpeF4waXldfW+VxH4V7M2i4cfWIs/0e4zH2TyiaWN+BPGgNHlenA/P9gjQF+dbh8dUx+Mr4S0pIJ HDvc/DOqIH0ha7nl22DMXNcccWpVvPlFHJIKhpT4tpMTMm2D86HgLMRsMgsZxUchPbE6myNFUDbMy Njjbdl90wmt5QJTDgk7ey5J/1S37khmTueUMXRJq9uPv9inIPzcjKqkXSsh2G2C7JhJmhWGJw5yOS 1ZM6cuxX7UHBrRH62q/eR7JNvTJ1EaDQ2jFEAarsrOwIMudwtiWtflhVe4rawe5ukBOQqOinpR7XS AxdYlUKDX8hSLcqDgW7A==; Received: from localhost ([::1] helo=bombadil.infradead.org) by bombadil.infradead.org with esmtp (Exim 4.94.2 #2 (Red Hat Linux)) id 1mgAMc-008v4L-M8; Thu, 28 Oct 2021 18:42:58 +0000 Received: from mail.kernel.org ([198.145.29.99]) by bombadil.infradead.org with esmtps (Exim 4.94.2 #2 (Red Hat Linux)) id 1mgAMW-008v27-Qq for linux-phy@lists.infradead.org; Thu, 28 Oct 2021 18:42:56 +0000 Received: by mail.kernel.org (Postfix) with ESMTPSA id 47909610FC; Thu, 28 Oct 2021 18:42:51 +0000 (UTC) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/simple; d=kernel.org; s=k20201202; t=1635446572; bh=COKgY/FCdCGJZ7bNKPO2We5dlVrf/wiFVEG6xmpFMmA=; h=From:To:Cc:Subject:Date:In-Reply-To:References:From; b=awPNAcUaJ54M5DItgcRwT11ORdR3XJjIKadEfqGsqFu8mbYvX4mdqmZ0WFeC+PKbB x1MsFqrHThm5Ysw5mj2bEp946e+nbpiUZBcPezEKz/GfJjEHq5TuV4xUOz05B6k9Ro G8HHon4AiInQxC3jB3Y4z2OxPOzYwbjB2x0Cxix+dPLsza2TcnkGZKI21m93F9K4bQ khEXCHhqGjfNmdSXRPLsB8wvnpcj8fuJ1q1uVahvowKrEhaA0XDsAXX6olJiDV/DiS n2ouTiqAi/0NOS8fCBzp0oLymBuCN7/zFugaXU077hE86f+GQ4A9V/W0uibXrEk0mU YAPE+jug1SZ9Q== From: =?utf-8?q?Marek_Beh=C3=BAn?= To: Miquel Raynal Cc: linux-phy@lists.infradead.org, Vinod Koul , Kishon Vijay Abraham I , pali@kernel.org, =?utf-8?q?Marek_Be?= =?utf-8?q?h=C3=BAn?= Subject: [PATCH phy 3/6] arm64: dts: marvell: armada-37xx: Add xtal clock to comphy node Date: Thu, 28 Oct 2021 20:42:39 +0200 Message-Id: <20211028184242.22105-4-kabel@kernel.org> X-Mailer: git-send-email 2.32.0 In-Reply-To: <20211028184242.22105-1-kabel@kernel.org> References: <20211028184242.22105-1-kabel@kernel.org> MIME-Version: 1.0 X-CRM114-Version: 20100106-BlameMichelson ( TRE 0.8.0 (BSD) ) MR-646709E3 X-CRM114-CacheID: sfid-20211028_114252_948653_36FD491D X-CRM114-Status: UNSURE ( 7.95 ) X-CRM114-Notice: Please train this message. X-BeenThere: linux-phy@lists.infradead.org X-Mailman-Version: 2.1.34 Precedence: list List-Id: Linux Phy Mailing list List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: "linux-phy" Errors-To: linux-phy-bounces+linux-phy=archiver.kernel.org@lists.infradead.org From: Pali Rohár Kernel driver phy-mvebu-a3700-comphy.c needs to know the rate of the reference xtal clock. So add missing xtal clock source into comphy device tree node. If the property is not present, the driver defaults to 25 MHz xtal rate (which, as far as we know, is used by all the existing boards). Signed-off-by: Pali Rohár Signed-off-by: Marek Behún --- arch/arm64/boot/dts/marvell/armada-37xx.dtsi | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/arm64/boot/dts/marvell/armada-37xx.dtsi b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi index 9acc5d2b5a00..673f4906eef9 100644 --- a/arch/arm64/boot/dts/marvell/armada-37xx.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi @@ -265,6 +265,8 @@ comphy: phy@18300 { "lane2_sata_usb3"; #address-cells = <1>; #size-cells = <0>; + clocks = <&xtalclk>; + clock-names = "xtal"; comphy0: phy@0 { reg = <0>; From patchwork Thu Oct 28 18:42:40 2021 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 8bit X-Patchwork-Submitter: =?utf-8?q?Marek_Beh=C3=BAn?= X-Patchwork-Id: 12590889 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from mail.kernel.org (mail.kernel.org [198.145.29.99]) by smtp.lore.kernel.org (Postfix) with ESMTP id AC1AEC433EF for ; Thu, 28 Oct 2021 18:43:00 +0000 (UTC) Received: from bombadil.infradead.org (bombadil.infradead.org [198.137.202.133]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by mail.kernel.org (Postfix) with ESMTPS id 75D6460FC0 for ; Thu, 28 Oct 2021 18:43:00 +0000 (UTC) DMARC-Filter: OpenDMARC Filter v1.4.1 mail.kernel.org 75D6460FC0 Authentication-Results: mail.kernel.org; dmarc=fail (p=none dis=none) header.from=kernel.org Authentication-Results: mail.kernel.org; spf=none smtp.mailfrom=lists.infradead.org DKIM-Signature: v=1; a=rsa-sha256; q=dns/txt; c=relaxed/relaxed; d=lists.infradead.org; s=bombadil.20210309; h=Sender: Content-Transfer-Encoding:Content-Type:List-Subscribe:List-Help:List-Post: List-Archive:List-Unsubscribe:List-Id:MIME-Version:References:In-Reply-To: Message-Id:Date:Subject:Cc:To:From:Reply-To:Content-ID:Content-Description: Resent-Date:Resent-From:Resent-Sender:Resent-To:Resent-Cc:Resent-Message-ID: List-Owner; bh=4APUqMTGRmYx1usA6IuhMSbw0GD8IBxxrW4GH7rssuw=; b=zw5UIkPROP8uPF zCKGunVX2vN7sHO2ZMnzbwkt+uSNyyDrURka2z2Scf5POk/MUc2g5i6S2f21XCzAUXSBjciIT+hUt LZyJdSt6sJ37TgysgsBL5/LJiVT6HwFSmNsCq/HcRb3kkVm1hK6R6e7/In0/WdW/DJ/6z8tbuWKYT KAyhq/tZIXTVlK6idWrS+0SiTKGMFcbO3Z95xnVBK23QdSLN86v5FMloG5g8/fa0VxerGxHAXVZ1S rHoySbw1wZkQ/W6n8omu7dm8ZGDt163v6E9ggWqssYwGts3zUa0rKNj4QJgfbd9bktzJz6NS648t7 ao98HcQec9nwtuni1Q+Q==; Received: from localhost ([::1] helo=bombadil.infradead.org) by bombadil.infradead.org with esmtp (Exim 4.94.2 #2 (Red Hat Linux)) id 1mgAMd-008v4t-Sy; Thu, 28 Oct 2021 18:42:59 +0000 Received: from mail.kernel.org ([198.145.29.99]) by bombadil.infradead.org with esmtps (Exim 4.94.2 #2 (Red Hat Linux)) id 1mgAMY-008v2e-NX for linux-phy@lists.infradead.org; Thu, 28 Oct 2021 18:42:58 +0000 Received: by mail.kernel.org (Postfix) with ESMTPSA id CCD75610EA; Thu, 28 Oct 2021 18:42:52 +0000 (UTC) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/simple; d=kernel.org; s=k20201202; t=1635446574; bh=syC5kPXBLfaaIJPGwPq2wqJBE2j58GdF6QrpX89v6fQ=; h=From:To:Cc:Subject:Date:In-Reply-To:References:From; b=h+fXMm8kpnpd7bfk5HEKILfrddAzjQp9QZ3wp0t2xg+OPaqXrqF8liTRRlf35W+iE dYA9mfXC72g4Cac8Jnq7F/CRYocdaoWWRfVA816lvCyoBpu5P5wEIDg7JVRCEPALBt Xka2UbA0Z4Ba6E2HD4WzjvOS3q2RkHTu/FYz/ciJCwAxl7148WuNsJZ7z88cuBQJlI pEDPGkKLJaVtKv7T0vwf8vasWSiGvw6xo7zuSGHSpZiaOvhRYsUFnMHzzsY5iIurnW fFUn6ZfTSEIQyrJtrLfVHNxH2qm1ZVMNT1eokgctgAQAUXSrmvgCfsmMLk10nWSXIY 3J8dyAT8CzUVw== From: =?utf-8?q?Marek_Beh=C3=BAn?= To: Miquel Raynal Cc: linux-phy@lists.infradead.org, Vinod Koul , Kishon Vijay Abraham I , pali@kernel.org, =?utf-8?q?Marek_Be?= =?utf-8?q?h=C3=BAn?= Subject: [PATCH phy 4/6] Revert "ata: ahci: mvebu: Make SATA PHY optional for Armada 3720" Date: Thu, 28 Oct 2021 20:42:40 +0200 Message-Id: <20211028184242.22105-5-kabel@kernel.org> X-Mailer: git-send-email 2.32.0 In-Reply-To: <20211028184242.22105-1-kabel@kernel.org> References: <20211028184242.22105-1-kabel@kernel.org> MIME-Version: 1.0 X-CRM114-Version: 20100106-BlameMichelson ( TRE 0.8.0 (BSD) ) MR-646709E3 X-CRM114-CacheID: sfid-20211028_114254_837001_6A4F1166 X-CRM114-Status: GOOD ( 11.57 ) X-BeenThere: linux-phy@lists.infradead.org X-Mailman-Version: 2.1.34 Precedence: list List-Id: Linux Phy Mailing list List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: "linux-phy" Errors-To: linux-phy-bounces+linux-phy=archiver.kernel.org@lists.infradead.org From: Pali Rohár This reverts commit 45aefe3d2251e4e229d7662052739f96ad1d08d9. Armada 3720 PHY driver (phy-mvebu-a3700-comphy.c) does not return -EOPNOTSUPP from phy_power_on() callback anymore. So remove AHCI_HFLAG_IGN_NOTSUPP_POWER_ON flag from Armada 3720 plat data. AHCI_HFLAG_IGN_NOTSUPP_POWER_ON is not used by any other ahci driver, so remove this flag completely. Signed-off-by: Pali Rohár Signed-off-by: Marek Behún Acked-by: Miquel Raynal --- drivers/ata/ahci.h | 2 -- drivers/ata/ahci_mvebu.c | 2 +- drivers/ata/libahci_platform.c | 2 +- 3 files changed, 2 insertions(+), 4 deletions(-) diff --git a/drivers/ata/ahci.h b/drivers/ata/ahci.h index 2e89499bd9c3..954cf6ca6a7a 100644 --- a/drivers/ata/ahci.h +++ b/drivers/ata/ahci.h @@ -240,8 +240,6 @@ enum { as default lpm_policy */ AHCI_HFLAG_SUSPEND_PHYS = (1 << 26), /* handle PHYs during suspend/resume */ - AHCI_HFLAG_IGN_NOTSUPP_POWER_ON = (1 << 27), /* ignore -EOPNOTSUPP - from phy_power_on() */ AHCI_HFLAG_NO_SXS = (1 << 28), /* SXS not supported */ /* ap->flags bits */ diff --git a/drivers/ata/ahci_mvebu.c b/drivers/ata/ahci_mvebu.c index 3ad46d26d9d5..d4bba3ace45d 100644 --- a/drivers/ata/ahci_mvebu.c +++ b/drivers/ata/ahci_mvebu.c @@ -227,7 +227,7 @@ static const struct ahci_mvebu_plat_data ahci_mvebu_armada_380_plat_data = { static const struct ahci_mvebu_plat_data ahci_mvebu_armada_3700_plat_data = { .plat_config = ahci_mvebu_armada_3700_config, - .flags = AHCI_HFLAG_SUSPEND_PHYS | AHCI_HFLAG_IGN_NOTSUPP_POWER_ON, + .flags = AHCI_HFLAG_SUSPEND_PHYS, }; static const struct of_device_id ahci_mvebu_of_match[] = { diff --git a/drivers/ata/libahci_platform.c b/drivers/ata/libahci_platform.c index 0910441321f7..250b82e30aa3 100644 --- a/drivers/ata/libahci_platform.c +++ b/drivers/ata/libahci_platform.c @@ -59,7 +59,7 @@ int ahci_platform_enable_phys(struct ahci_host_priv *hpriv) } rc = phy_power_on(hpriv->phys[i]); - if (rc && !(rc == -EOPNOTSUPP && (hpriv->flags & AHCI_HFLAG_IGN_NOTSUPP_POWER_ON))) { + if (rc) { phy_exit(hpriv->phys[i]); goto disable_phys; } From patchwork Thu Oct 28 18:42:41 2021 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 8bit X-Patchwork-Submitter: =?utf-8?q?Marek_Beh=C3=BAn?= X-Patchwork-Id: 12590891 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from mail.kernel.org (mail.kernel.org [198.145.29.99]) by smtp.lore.kernel.org (Postfix) with ESMTP id E5062C433FE for ; Thu, 28 Oct 2021 18:43:01 +0000 (UTC) Received: from bombadil.infradead.org (bombadil.infradead.org [198.137.202.133]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by mail.kernel.org (Postfix) with ESMTPS id A9B0361040 for ; Thu, 28 Oct 2021 18:43:01 +0000 (UTC) DMARC-Filter: OpenDMARC Filter v1.4.1 mail.kernel.org A9B0361040 Authentication-Results: mail.kernel.org; dmarc=fail (p=none dis=none) header.from=kernel.org Authentication-Results: mail.kernel.org; spf=none smtp.mailfrom=lists.infradead.org DKIM-Signature: v=1; a=rsa-sha256; q=dns/txt; c=relaxed/relaxed; d=lists.infradead.org; s=bombadil.20210309; h=Sender: Content-Transfer-Encoding:Content-Type:List-Subscribe:List-Help:List-Post: List-Archive:List-Unsubscribe:List-Id:MIME-Version:References:In-Reply-To: Message-Id:Date:Subject:Cc:To:From:Reply-To:Content-ID:Content-Description: Resent-Date:Resent-From:Resent-Sender:Resent-To:Resent-Cc:Resent-Message-ID: List-Owner; bh=wyHWyR/KzF9atFpnMlzp3/qdLxyIMOnQIU/jk/lPVMc=; b=4hY0MRehOTtl3s ewUrGB8w/4dhF5fC0TJMrpod6/oDJLkoyX2+sHjOlfI7sIa2Va5FiJXDq3oPgBevW+aSt4ECDgf5u K54RIZuthOaPVOf+UXeNvkjTft0ueulhqVTIZRfrU9PTLtt73vHYXsXI8JzzOoOCpkIL3vuh0deJb 83Wg4UVeLeFmRVb4HiFjjWw2RWwkaxCqTUVg+URnqWBHnaEPtRPovq3vIQsr8qVDvE+PE/aIrAy9C Ilv/lTHqrbE+cEe5q3lxvb7XhrhheOZVIrUTLRWe4CZYxEXxpRBLpkEPUAncDjE+Eh71xqdmHVivX MKXlEz+1GFp/IgPSa1lQ==; Received: from localhost ([::1] helo=bombadil.infradead.org) by bombadil.infradead.org with esmtp (Exim 4.94.2 #2 (Red Hat Linux)) id 1mgAMf-008v5N-1r; Thu, 28 Oct 2021 18:43:01 +0000 Received: from mail.kernel.org ([198.145.29.99]) by bombadil.infradead.org with esmtps (Exim 4.94.2 #2 (Red Hat Linux)) id 1mgAMZ-008v3G-RL for linux-phy@lists.infradead.org; Thu, 28 Oct 2021 18:42:59 +0000 Received: by mail.kernel.org (Postfix) with ESMTPSA id 5F8FF60FC0; Thu, 28 Oct 2021 18:42:54 +0000 (UTC) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/simple; d=kernel.org; s=k20201202; t=1635446575; bh=eFW2Sss2ixL5ykDfrsxhIEk6KxbMse3U+e1pe6vEwGw=; h=From:To:Cc:Subject:Date:In-Reply-To:References:From; b=rQar0QtpIzlIdbja8GiPXFdqTj3FaFV2K/lMkPHTFrVBJ98gaBramXONuSteH3mSU 6OGTYILCcDL7+OPSRW3uvJ+jRL20p3oy5cqOZjxJbEXQ2b3qhbzNg/N+GPo0CVZ6aT ZN8+eWc4Z++MDt9qRxKswYH+bmAOLeiJ9otEfVDVSn4tfXTd7wLt5Jbln1ReSinKfX EGQE2NLJ+VFUUSc7ehWs3IOpXEm/MhwF3Nq7kSkUQwgdwDOHcWeVjIVlSLpgBEoM8H I52XPRaXORLz0mR+E+1gfrCB3Xw4C5qJr/wlKoStMQUIgXjgN5jXvJc4iS8VxqyWFP aT0KLd7Ah/pFw== From: =?utf-8?q?Marek_Beh=C3=BAn?= To: Miquel Raynal Cc: linux-phy@lists.infradead.org, Vinod Koul , Kishon Vijay Abraham I , pali@kernel.org, =?utf-8?q?Marek_Be?= =?utf-8?q?h=C3=BAn?= Subject: [PATCH phy 5/6] Revert "usb: host: xhci: mvebu: make USB 3.0 PHY optional for Armada 3720" Date: Thu, 28 Oct 2021 20:42:41 +0200 Message-Id: <20211028184242.22105-6-kabel@kernel.org> X-Mailer: git-send-email 2.32.0 In-Reply-To: <20211028184242.22105-1-kabel@kernel.org> References: <20211028184242.22105-1-kabel@kernel.org> MIME-Version: 1.0 X-CRM114-Version: 20100106-BlameMichelson ( TRE 0.8.0 (BSD) ) MR-646709E3 X-CRM114-CacheID: sfid-20211028_114255_983529_01CCAEF1 X-CRM114-Status: GOOD ( 15.17 ) X-BeenThere: linux-phy@lists.infradead.org X-Mailman-Version: 2.1.34 Precedence: list List-Id: Linux Phy Mailing list List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: "linux-phy" Errors-To: linux-phy-bounces+linux-phy=archiver.kernel.org@lists.infradead.org From: Pali Rohár This reverts commit 3241929b67d28c83945d3191c6816a3271fd6b85. Armada 3720 phy driver (phy-mvebu-a3700-comphy.c) does not return -EOPNOTSUPP from phy_power_on() callback anymore. So remove XHCI_SKIP_PHY_INIT flag from xhci_mvebu_a3700_plat_setup() and then also whole xhci_mvebu_a3700_plat_setup() function which is there just to handle -EOPNOTSUPP for XHCI_SKIP_PHY_INIT. xhci plat_setup callback is not used by any other xhci plat driver, so remove this callback completely. Signed-off-by: Pali Rohár Signed-off-by: Marek Behún Acked-by: Miquel Raynal --- drivers/usb/host/xhci-mvebu.c | 42 ----------------------------------- drivers/usb/host/xhci-mvebu.h | 6 ----- drivers/usb/host/xhci-plat.c | 20 +---------------- drivers/usb/host/xhci-plat.h | 1 - 4 files changed, 1 insertion(+), 68 deletions(-) diff --git a/drivers/usb/host/xhci-mvebu.c b/drivers/usb/host/xhci-mvebu.c index 8ca1a235d164..60651a50770f 100644 --- a/drivers/usb/host/xhci-mvebu.c +++ b/drivers/usb/host/xhci-mvebu.c @@ -8,7 +8,6 @@ #include #include #include -#include #include #include @@ -75,47 +74,6 @@ int xhci_mvebu_mbus_init_quirk(struct usb_hcd *hcd) return 0; } -int xhci_mvebu_a3700_plat_setup(struct usb_hcd *hcd) -{ - struct xhci_hcd *xhci = hcd_to_xhci(hcd); - struct device *dev = hcd->self.controller; - struct phy *phy; - int ret; - - /* Old bindings miss the PHY handle */ - phy = of_phy_get(dev->of_node, "usb3-phy"); - if (IS_ERR(phy) && PTR_ERR(phy) == -EPROBE_DEFER) - return -EPROBE_DEFER; - else if (IS_ERR(phy)) - goto phy_out; - - ret = phy_init(phy); - if (ret) - goto phy_put; - - ret = phy_set_mode(phy, PHY_MODE_USB_HOST_SS); - if (ret) - goto phy_exit; - - ret = phy_power_on(phy); - if (ret == -EOPNOTSUPP) { - /* Skip initializatin of XHCI PHY when it is unsupported by firmware */ - dev_warn(dev, "PHY unsupported by firmware\n"); - xhci->quirks |= XHCI_SKIP_PHY_INIT; - } - if (ret) - goto phy_exit; - - phy_power_off(phy); -phy_exit: - phy_exit(phy); -phy_put: - of_phy_put(phy); -phy_out: - - return 0; -} - int xhci_mvebu_a3700_init_quirk(struct usb_hcd *hcd) { struct xhci_hcd *xhci = hcd_to_xhci(hcd); diff --git a/drivers/usb/host/xhci-mvebu.h b/drivers/usb/host/xhci-mvebu.h index 01bf3fcb3eca..3be021793cc8 100644 --- a/drivers/usb/host/xhci-mvebu.h +++ b/drivers/usb/host/xhci-mvebu.h @@ -12,7 +12,6 @@ struct usb_hcd; #if IS_ENABLED(CONFIG_USB_XHCI_MVEBU) int xhci_mvebu_mbus_init_quirk(struct usb_hcd *hcd); -int xhci_mvebu_a3700_plat_setup(struct usb_hcd *hcd); int xhci_mvebu_a3700_init_quirk(struct usb_hcd *hcd); #else static inline int xhci_mvebu_mbus_init_quirk(struct usb_hcd *hcd) @@ -20,11 +19,6 @@ static inline int xhci_mvebu_mbus_init_quirk(struct usb_hcd *hcd) return 0; } -static inline int xhci_mvebu_a3700_plat_setup(struct usb_hcd *hcd) -{ - return 0; -} - static inline int xhci_mvebu_a3700_init_quirk(struct usb_hcd *hcd) { return 0; diff --git a/drivers/usb/host/xhci-plat.c b/drivers/usb/host/xhci-plat.c index c1edcc9b13ce..4d34f6005381 100644 --- a/drivers/usb/host/xhci-plat.c +++ b/drivers/usb/host/xhci-plat.c @@ -44,16 +44,6 @@ static void xhci_priv_plat_start(struct usb_hcd *hcd) priv->plat_start(hcd); } -static int xhci_priv_plat_setup(struct usb_hcd *hcd) -{ - struct xhci_plat_priv *priv = hcd_to_xhci_priv(hcd); - - if (!priv->plat_setup) - return 0; - - return priv->plat_setup(hcd); -} - static int xhci_priv_init_quirk(struct usb_hcd *hcd) { struct xhci_plat_priv *priv = hcd_to_xhci_priv(hcd); @@ -121,7 +111,6 @@ static const struct xhci_plat_priv xhci_plat_marvell_armada = { }; static const struct xhci_plat_priv xhci_plat_marvell_armada3700 = { - .plat_setup = xhci_mvebu_a3700_plat_setup, .init_quirk = xhci_mvebu_a3700_init_quirk, }; @@ -341,14 +330,7 @@ static int xhci_plat_probe(struct platform_device *pdev) hcd->tpl_support = of_usb_host_tpl_support(sysdev->of_node); xhci->shared_hcd->tpl_support = hcd->tpl_support; - - if (priv) { - ret = xhci_priv_plat_setup(hcd); - if (ret) - goto disable_usb_phy; - } - - if ((xhci->quirks & XHCI_SKIP_PHY_INIT) || (priv && (priv->quirks & XHCI_SKIP_PHY_INIT))) + if (priv && (priv->quirks & XHCI_SKIP_PHY_INIT)) hcd->skip_phy_initialization = 1; if (priv && (priv->quirks & XHCI_SG_TRB_CACHE_SIZE_QUIRK)) diff --git a/drivers/usb/host/xhci-plat.h b/drivers/usb/host/xhci-plat.h index 561d0b7bce09..1fb149d1fbce 100644 --- a/drivers/usb/host/xhci-plat.h +++ b/drivers/usb/host/xhci-plat.h @@ -13,7 +13,6 @@ struct xhci_plat_priv { const char *firmware_name; unsigned long long quirks; - int (*plat_setup)(struct usb_hcd *); void (*plat_start)(struct usb_hcd *); int (*init_quirk)(struct usb_hcd *); int (*suspend_quirk)(struct usb_hcd *); From patchwork Thu Oct 28 18:42:42 2021 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 8bit X-Patchwork-Submitter: =?utf-8?q?Marek_Beh=C3=BAn?= X-Patchwork-Id: 12590893 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from mail.kernel.org (mail.kernel.org [198.145.29.99]) by smtp.lore.kernel.org (Postfix) with ESMTP id E11E0C433F5 for ; Thu, 28 Oct 2021 18:43:03 +0000 (UTC) Received: from bombadil.infradead.org (bombadil.infradead.org [198.137.202.133]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by mail.kernel.org (Postfix) with ESMTPS id AC0C560FC0 for ; Thu, 28 Oct 2021 18:43:03 +0000 (UTC) DMARC-Filter: OpenDMARC Filter v1.4.1 mail.kernel.org AC0C560FC0 Authentication-Results: mail.kernel.org; dmarc=fail (p=none dis=none) header.from=kernel.org Authentication-Results: mail.kernel.org; spf=none smtp.mailfrom=lists.infradead.org DKIM-Signature: v=1; a=rsa-sha256; q=dns/txt; c=relaxed/relaxed; d=lists.infradead.org; s=bombadil.20210309; h=Sender: Content-Transfer-Encoding:Content-Type:List-Subscribe:List-Help:List-Post: List-Archive:List-Unsubscribe:List-Id:MIME-Version:References:In-Reply-To: Message-Id:Date:Subject:Cc:To:From:Reply-To:Content-ID:Content-Description: Resent-Date:Resent-From:Resent-Sender:Resent-To:Resent-Cc:Resent-Message-ID: List-Owner; bh=MLaDF45SNAJRx5WughpKwKQnKVOw0C+nG9IJMYftun0=; b=v6MC69aDpO+/+0 A6xbu92EBLBr0y7YAbJf4nKerFFJM/llIYHBFhottwaxx3Olcv44C+1BZfd2fTd495qosNpwmhbl9 UVkt734JzIeB+hUiB8sANvq40XmXeuM7TjB8XU4PUuXmI2y0/FmwV0jdds9SoobLXmAAq7Th9qfSS SSTA6x1QMF3zq5NeNVauc6y+MZ8BxwsK8np9ji65ibCXm6fCrEx29baTOTUD15tSHPg/d3pKq4QfC Yp1rHvLd+khaxBe/ROJainyfKNayNjZ26v0hMq4//kppPjvlorn2HZbQng+7ROGX8ZMCm3svjBt4c DdyWVyE70ALZpma/hfhw==; Received: from localhost ([::1] helo=bombadil.infradead.org) by bombadil.infradead.org with esmtp (Exim 4.94.2 #2 (Red Hat Linux)) id 1mgAMh-008v6D-5M; Thu, 28 Oct 2021 18:43:03 +0000 Received: from mail.kernel.org ([198.145.29.99]) by bombadil.infradead.org with esmtps (Exim 4.94.2 #2 (Red Hat Linux)) id 1mgAMb-008v27-7Z for linux-phy@lists.infradead.org; Thu, 28 Oct 2021 18:43:00 +0000 Received: by mail.kernel.org (Postfix) with ESMTPSA id E4ACA61106; Thu, 28 Oct 2021 18:42:55 +0000 (UTC) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/simple; d=kernel.org; s=k20201202; t=1635446577; bh=tHTCucTQ1Ekwp0IefbR9Iw3WLKxoQOTqZVwyUhTXt70=; h=From:To:Cc:Subject:Date:In-Reply-To:References:From; b=k7Aww2FogOuXcFHazKMCsy3MJ+Mt6HMYzlHQp4jinhs+C7Tingu7apJVUUbziJTh+ YclFlQanDg+L2rXNA1cCLfzyBMXsYib8rOL73U61xJpnqnxUFcqfr5XANRaD3Z/v6h ls9om/1BQm3Q+cGG9uC1sE0/xMVWen6cqPuTIWoDMzPFmKZkg15xCXmzaNNp4UIj1Q QnC9AdZ0LpBqIpPRGza4EZ+x0ZbPGn4R3lk1iq4pmZu6XmCN9X+1RebobaVmBzcKeN HOTlMmiW90Ro7+eW0uvz6WtZHzudcjMiz9FdNiLV77ZhXlB5pvDkcciflNcQaowPZ/ 8kd4jKEwXbHog== From: =?utf-8?q?Marek_Beh=C3=BAn?= To: Miquel Raynal Cc: linux-phy@lists.infradead.org, Vinod Koul , Kishon Vijay Abraham I , pali@kernel.org, =?utf-8?q?Marek_Be?= =?utf-8?q?h=C3=BAn?= Subject: [PATCH phy 6/6] Revert "PCI: aardvark: Fix initialization with old Marvell's Arm Trusted Firmware" Date: Thu, 28 Oct 2021 20:42:42 +0200 Message-Id: <20211028184242.22105-7-kabel@kernel.org> X-Mailer: git-send-email 2.32.0 In-Reply-To: <20211028184242.22105-1-kabel@kernel.org> References: <20211028184242.22105-1-kabel@kernel.org> MIME-Version: 1.0 X-CRM114-Version: 20100106-BlameMichelson ( TRE 0.8.0 (BSD) ) MR-646709E3 X-CRM114-CacheID: sfid-20211028_114257_338411_C5A1C1FD X-CRM114-Status: UNSURE ( 8.49 ) X-CRM114-Notice: Please train this message. X-BeenThere: linux-phy@lists.infradead.org X-Mailman-Version: 2.1.34 Precedence: list List-Id: Linux Phy Mailing list List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: "linux-phy" Errors-To: linux-phy-bounces+linux-phy=archiver.kernel.org@lists.infradead.org From: Pali Rohár This reverts commit b0c6ae0f8948a2be6bf4e8b4bbab9ca1343289b6. Armada 3720 phy driver (phy-mvebu-a3700-comphy.c) does not return -EOPNOTSUPP from phy_power_on() callback anymore. So remove dead code which handles -EOPNOTSUPP return value. Signed-off-by: Pali Rohár Signed-off-by: Marek Behún Reviewed-by: Miquel Raynal --- drivers/pci/controller/pci-aardvark.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) diff --git a/drivers/pci/controller/pci-aardvark.c b/drivers/pci/controller/pci-aardvark.c index 596ebcfcc82d..b32fc1efd633 100644 --- a/drivers/pci/controller/pci-aardvark.c +++ b/drivers/pci/controller/pci-aardvark.c @@ -1349,9 +1349,7 @@ static int advk_pcie_enable_phy(struct advk_pcie *pcie) } ret = phy_power_on(pcie->phy); - if (ret == -EOPNOTSUPP) { - dev_warn(&pcie->pdev->dev, "PHY unsupported by firmware\n"); - } else if (ret) { + if (ret) { phy_exit(pcie->phy); return ret; }