From patchwork Tue Nov 23 06:20:45 2021 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Tanmay Shah X-Patchwork-Id: 12633481 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id E191CC4332F for ; Tue, 23 Nov 2021 06:21:00 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S233692AbhKWGYH (ORCPT ); Tue, 23 Nov 2021 01:24:07 -0500 Received: from mail-bn8nam12on2082.outbound.protection.outlook.com ([40.107.237.82]:28111 "EHLO NAM12-BN8-obe.outbound.protection.outlook.com" rhost-flags-OK-OK-OK-FAIL) by vger.kernel.org with ESMTP id S229953AbhKWGYE (ORCPT ); Tue, 23 Nov 2021 01:24:04 -0500 ARC-Seal: i=1; a=rsa-sha256; s=arcselector9901; d=microsoft.com; cv=none; b=A2OaRn/oVsfXK3uCyW5MmhaAoZIKrsssz/O/hcld8jC7vfY/ITuMdRi1P7hc6LxYltQDP8Pp3VRCSd6MUBogiRGi/utlyHgAZdvLDC5zrWAc1exNhMWazsW9XTrdJsq5O1Y4nhgEiWJ7JZeBCho00BFmYellK5a/vS+Ishv3VPJ973jF4PCwbmMrKnTHR0JxiEe+rah6Yrn1vntQCgO620S4kK0IuJ8QpvooasFtHKg81V99JHwGb21+kW91XBWwdxZMJKahYP+AOOt4ARpQkfVVyKGT9DC7RUeRTjdVR7iTFDXPI1uH17OlbVUEzx8yHHKG41Vtn6p4hJIJKj5nsw== ARC-Message-Signature: i=1; a=rsa-sha256; c=relaxed/relaxed; d=microsoft.com; s=arcselector9901; h=From:Date:Subject:Message-ID:Content-Type:MIME-Version:X-MS-Exchange-AntiSpam-MessageData-ChunkCount:X-MS-Exchange-AntiSpam-MessageData-0:X-MS-Exchange-AntiSpam-MessageData-1; bh=/lW4TlLD5Klk7r8xSlx5CNV2Ywv+FoK0fGE97sYHEX4=; b=hssdxuDXpOnKvJOWw6BcQGtP1jxJDRY7Sv05VGmywYpIirHztxpB7xsLVPxFOklJSGytao6LeR+e+0Nm7OGSEx3W+kucAZ7J2WLq7AAuI4968+ZZAxqtHpX88/JM0dTm+M5Z2GXXIoG0oLXgdivuWWw6za6jY02a3me3/lAv63wJgePBWMbupnC0u28Zlp8yGFHZTDXmpmhnaIYj7dJ5IyQbVZq7HkHfGN7GhVr5rglxvLZu/oJuexXdGnkkl3dhMxOlIktc6WSJQVX/WmTtFTUyu5eLYM+Gf1xCI3n9jrdVYMUDrD/zmnvMcFlmnEtUNWG9+6PXhroYpeNCloWI+g== ARC-Authentication-Results: i=1; mx.microsoft.com 1; spf=pass (sender ip is 149.199.62.198) smtp.rcpttodomain=linaro.org smtp.mailfrom=xilinx.com; dmarc=pass (p=none sp=none pct=100) action=none header.from=xilinx.com; dkim=none (message not signed); arc=none DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=xilinx.onmicrosoft.com; s=selector2-xilinx-onmicrosoft-com; h=From:Date:Subject:Message-ID:Content-Type:MIME-Version:X-MS-Exchange-SenderADCheck; bh=/lW4TlLD5Klk7r8xSlx5CNV2Ywv+FoK0fGE97sYHEX4=; b=cMn58Y0JOXgnrMK06n3J0tm9F9PzsOv7cFU/s/FK0xI/nAE/4VA78eLm1CIogV9gVu4YIIpQF3RYzDOmBPHLgeVj96hZHGxyQpiVGJFEFxTOR46tipfdCgbNXsw3Jc7a95s/aEA/UAAtUGQ8XOk020Hj+EsCAOD02pBdKskZVAU= Received: from SA9PR13CA0137.namprd13.prod.outlook.com (2603:10b6:806:27::22) by CH0PR02MB8259.namprd02.prod.outlook.com (2603:10b6:610:fb::11) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384) id 15.20.4713.19; Tue, 23 Nov 2021 06:20:54 +0000 Received: from SN1NAM02FT0045.eop-nam02.prod.protection.outlook.com (2603:10b6:806:27:cafe::a9) by SA9PR13CA0137.outlook.office365.com (2603:10b6:806:27::22) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384) id 15.20.4734.11 via Frontend Transport; Tue, 23 Nov 2021 06:20:54 +0000 X-MS-Exchange-Authentication-Results: spf=pass (sender IP is 149.199.62.198) smtp.mailfrom=xilinx.com; dkim=none (message not signed) header.d=none;dmarc=pass action=none header.from=xilinx.com; Received-SPF: Pass (protection.outlook.com: domain of xilinx.com designates 149.199.62.198 as permitted sender) receiver=protection.outlook.com; client-ip=149.199.62.198; helo=xsj-pvapexch02.xlnx.xilinx.com; Received: from xsj-pvapexch02.xlnx.xilinx.com (149.199.62.198) by SN1NAM02FT0045.mail.protection.outlook.com (10.97.5.234) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256) id 15.20.4713.19 via Frontend Transport; Tue, 23 Nov 2021 06:20:54 +0000 Received: from xsj-pvapexch02.xlnx.xilinx.com (172.19.86.41) by xsj-pvapexch02.xlnx.xilinx.com (172.19.86.41) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256) id 15.1.2176.14; Mon, 22 Nov 2021 22:20:53 -0800 Received: from smtp.xilinx.com (172.19.127.95) by xsj-pvapexch02.xlnx.xilinx.com (172.19.86.41) with Microsoft SMTP Server id 15.1.2176.14 via Frontend Transport; Mon, 22 Nov 2021 22:20:53 -0800 Envelope-to: bjorn.andersson@linaro.org, mathieu.poirier@linaro.org, robh+dt@kernel.org, laurent.pinchart@ideasonboard.com, bill.mills@linaro.org, linux-remoteproc@vger.kernel.org, linux-kernel@vger.kernel.org, devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org Received: from [172.19.3.14] (port=33042 helo=xsjtanmays50.xilinx.com) by smtp.xilinx.com with esmtp (Exim 4.90) (envelope-from ) id 1mpPAj-0001Zw-Oi; Mon, 22 Nov 2021 22:20:53 -0800 From: Tanmay Shah To: Bjorn Andersson , Mathieu Poirier , Rob Herring , Michal Simek CC: Laurent Pinchart , Ben Levinsky , Bill Mills , Sergei Korneichuk , Tanmay Shah , , , , Subject: [PATCH v2 1/6] dt-bindings: remoteproc: Add Xilinx RPU subsystem bindings Date: Mon, 22 Nov 2021 22:20:45 -0800 Message-ID: <20211123062050.1442712-2-tanmay.shah@xilinx.com> X-Mailer: git-send-email 2.25.1 In-Reply-To: <20211123062050.1442712-1-tanmay.shah@xilinx.com> References: <20211123062050.1442712-1-tanmay.shah@xilinx.com> MIME-Version: 1.0 X-EOPAttributedMessage: 0 X-MS-PublicTrafficType: Email X-MS-Office365-Filtering-Correlation-Id: 305bf327-5b19-4af3-db35-08d9ae4967b0 X-MS-TrafficTypeDiagnostic: CH0PR02MB8259: X-Microsoft-Antispam-PRVS: X-Auto-Response-Suppress: DR, RN, NRN, OOF, AutoReply X-MS-Oob-TLC-OOBClassifiers: OLM:9508; X-MS-Exchange-SenderADCheck: 1 X-MS-Exchange-AntiSpam-Relay: 0 X-Microsoft-Antispam: BCL:0; X-Microsoft-Antispam-Message-Info: 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 X-Forefront-Antispam-Report: CIP:149.199.62.198;CTRY:US;LANG:en;SCL:1;SRV:;IPV:NLI;SFV:NSPM;H:xsj-pvapexch02.xlnx.xilinx.com;PTR:unknown-62-198.xilinx.com;CAT:NONE;SFS:(36840700001)(46966006)(1076003)(36906005)(7696005)(7636003)(426003)(83380400001)(6636002)(316002)(8936002)(110136005)(5660300002)(70586007)(6666004)(356005)(44832011)(82310400004)(36756003)(2906002)(4326008)(9786002)(54906003)(186003)(70206006)(8676002)(336012)(26005)(36860700001)(966005)(2616005)(508600001)(47076005)(102446001);DIR:OUT;SFP:1101; X-OriginatorOrg: xilinx.com X-MS-Exchange-CrossTenant-OriginalArrivalTime: 23 Nov 2021 06:20:54.4275 (UTC) X-MS-Exchange-CrossTenant-Network-Message-Id: 305bf327-5b19-4af3-db35-08d9ae4967b0 X-MS-Exchange-CrossTenant-Id: 657af505-d5df-48d0-8300-c31994686c5c X-MS-Exchange-CrossTenant-OriginalAttributedTenantConnectingIp: TenantId=657af505-d5df-48d0-8300-c31994686c5c;Ip=[149.199.62.198];Helo=[xsj-pvapexch02.xlnx.xilinx.com] X-MS-Exchange-CrossTenant-AuthSource: SN1NAM02FT0045.eop-nam02.prod.protection.outlook.com X-MS-Exchange-CrossTenant-AuthAs: Anonymous X-MS-Exchange-CrossTenant-FromEntityHeader: HybridOnPrem X-MS-Exchange-Transport-CrossTenantHeadersStamped: CH0PR02MB8259 Precedence: bulk List-ID: X-Mailing-List: linux-remoteproc@vger.kernel.org Xilinx ZynqMP platform has dual-core ARM Cortex R5 Realtime Processing Unit(RPU) subsystem. This patch adds dt-bindings for RPU subsystem (cluster). Signed-off-by: Tanmay Shah --- .../bindings/remoteproc/xlnx,r5f-rproc.yaml | 139 ++++++++++++++++++ include/dt-bindings/power/xlnx-zynqmp-power.h | 6 + 2 files changed, 145 insertions(+) create mode 100644 Documentation/devicetree/bindings/remoteproc/xlnx,r5f-rproc.yaml diff --git a/Documentation/devicetree/bindings/remoteproc/xlnx,r5f-rproc.yaml b/Documentation/devicetree/bindings/remoteproc/xlnx,r5f-rproc.yaml new file mode 100644 index 000000000000..d43f0b16ad7f --- /dev/null +++ b/Documentation/devicetree/bindings/remoteproc/xlnx,r5f-rproc.yaml @@ -0,0 +1,139 @@ +# SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/remoteproc/xlnx,r5f-rproc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Xilinx R5F processor subsystem + +maintainers: + - Ben Levinsky + - Tanmay Shah + +description: | + The Xilinx platforms include a pair of Cortex-R5F processors (RPU) for + real-time processing based on the Cortex-R5F processor core from ARM. + The Cortex-R5F processor implements the Arm v7-R architecture and includes a + floating-point unit that implements the Arm VFPv3 instruction set. + +properties: + compatible: + const: xlnx,zynqmp-r5fss + + xlnx,cluster-mode: + $ref: /schemas/types.yaml#/definitions/uint32 + description: | + The RPU MPCore can operate in split mode(Dual-processor performance), Safety + lock-step mode(Both RPU cores execute the same code in lock-step, + clock-for-clock) or Single CPU mode (RPU core 0 can be held in reset while + core 1 runs normally). The processor does not support dynamic configuration. + Switching between modes is only permitted immediately after a processor reset. + If set to 1 then lockstep mode and if 0 then split mode. + If set to 2 then single CPU mode. When not defined, default will be lockstep mode. + + "#address-cells": + const: 1 + + "#size-cells": + const: 1 + + reg: + items: + - description: RPU subsystem status and control registers + +patternProperties: + "^r5f-[a-f0-9]+$": + type: object + description: | + The RPU is located in the Low Power Domain of the Processor Subsystem. + Each processor includes separate L1 instruction and data caches and + tightly coupled memories (TCM). System memory is cacheable, but the TCM + memory space is non-cacheable. + + Each RPU contains one 64KB memory and two 32KB memories that + are accessed via the TCM A and B port interfaces, for a total of 128KB + per processor. In lock-step mode, the processor has access to 256KB of + TCM memory. + + properties: + compatible: + const: xlnx,zynqmp-r5f + + power-domains: + description: | + phandle to a PM domain provider node and an args specifier containing + the r5f0 and r5f1 node id value. + + reg: + items: + - description: RPU0 and RPU1 control and status registers + + mboxes: + items: + - description: | + Bi-directional channel to send data to RPU and receive ack from RPU. + Request and response message buffers are available and each buffer is 32 bytes. + - description: | + Bi-directional channel to receive data from RPU and send ack from RPU. + Request and response message buffers are available and each buffer is 32 bytes. + minItems: 1 + + mbox-names: + items: + - const: tx + - const: rx + minItems: 1 + + sram: + $ref: /schemas/types.yaml#/definitions/phandle-array + minItems: 1 + description: | + phandles to one or more reserved on-chip SRAM regions. Other than TCM, + the RPU can execute instructions and access data from, the OCM memory, + the main DDR memory, and other system memories. + + The regions should be defined as child nodes of the respective SRAM + node, and should be defined as per the generic bindings in, + Documentation/devicetree/bindings/sram/sram.yaml + + memory-region: + $ref: /schemas/types.yaml#/definitions/phandle-array + description: | + List of phandles to the reserved memory regions associated with the + remoteproc device. This is variable and describes the memories shared with + the remote processor (e.g. remoteproc firmware and carveouts, rpmsg + vrings, ...). This reserved memory region will be allocated on DDR memory. + See Documentation/devicetree/bindings/reserved-memory/reserved-memory.txt + + required: + - compatible + - power-domains + + unevaluatedProperties: false + +required: + - compatible + +additionalProperties: false + +examples: + - | + r5fss: r5fss@ff9a0000 { + compatible = "xlnx,zynqmp-r5fss"; + xlnx,cluster-mode = <1>; + + #address-cells = <1>; + #size-cells = <1>; + reg = <0xff9a0000 0x228>; + + r5f-0 { + compatible = "xlnx,zynqmp-r5f"; + power-domains = <&zynqmp_firmware 0x7>; + }; + + r5f-1 { + compatible = "xlnx,zynqmp-r5f"; + power-domains = <&zynqmp_firmware 0x8>; + }; + }; +... diff --git a/include/dt-bindings/power/xlnx-zynqmp-power.h b/include/dt-bindings/power/xlnx-zynqmp-power.h index 0d9a412fd5e0..618024cbb20d 100644 --- a/include/dt-bindings/power/xlnx-zynqmp-power.h +++ b/include/dt-bindings/power/xlnx-zynqmp-power.h @@ -6,6 +6,12 @@ #ifndef _DT_BINDINGS_ZYNQMP_POWER_H #define _DT_BINDINGS_ZYNQMP_POWER_H +#define PD_RPU_0 7 +#define PD_RPU_1 8 +#define PD_R5_0_ATCM 15 +#define PD_R5_0_BTCM 16 +#define PD_R5_1_ATCM 17 +#define PD_R5_1_BTCM 18 #define PD_USB_0 22 #define PD_USB_1 23 #define PD_TTC_0 24 From patchwork Tue Nov 23 06:20:46 2021 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Tanmay Shah X-Patchwork-Id: 12633489 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id CEFD8C43219 for ; Tue, 23 Nov 2021 06:21:18 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S233884AbhKWGYZ (ORCPT ); Tue, 23 Nov 2021 01:24:25 -0500 Received: from mail-dm6nam10on2079.outbound.protection.outlook.com ([40.107.93.79]:22657 "EHLO NAM10-DM6-obe.outbound.protection.outlook.com" rhost-flags-OK-OK-OK-FAIL) by vger.kernel.org with ESMTP id S233838AbhKWGYV (ORCPT ); Tue, 23 Nov 2021 01:24:21 -0500 ARC-Seal: i=1; a=rsa-sha256; s=arcselector9901; d=microsoft.com; cv=none; b=CTFLQB6J8X+lZ97oc+SmqOrFmmN2zIkO0PUc6A3/XJH1uNN68vjzvtX7rOA3LAsQX+j0/yudqdRCSNdlyvNMRI6lSThWPRXkzQlWvMx5/Tf0qfGQSOAB/QWG9MA6cRQgpy1Kvc8QJ01URRQ9daHkLLDXyPCVEtENDuoNjCNi/Lus8+iN+m6/POCCGz3dcvK6SjeivhYo7sFtJEqPXmQ/wXXIlXwEQfKpr82zaPQgsicX85Z3B8W4hAaAdiLiRdRdQBjtixLEjnGYeMD+SumOyuYbzDFN9DK9MxpW3m4M4pQG2KAa73COlQ/b1XUXGgsr9dyrgm4ZiHyQsWOh4Xv6fw== ARC-Message-Signature: i=1; a=rsa-sha256; c=relaxed/relaxed; d=microsoft.com; s=arcselector9901; h=From:Date:Subject:Message-ID:Content-Type:MIME-Version:X-MS-Exchange-AntiSpam-MessageData-ChunkCount:X-MS-Exchange-AntiSpam-MessageData-0:X-MS-Exchange-AntiSpam-MessageData-1; bh=REIex1Djjp6zXM3cMB1tK9TmK4fgUwgcCpRIy5EhstQ=; b=oAZLEfvQgoPb/qYwonegaVFkCFqALoe8E802/GrH89G2qubF2ObzMjVOrGZZmHw9cstUS6Tg+i25Jwu3qZyPyieqVzXGYikDovOxxFjm/jP1B/ioWeo+9zll9f61A8t1JL6pDmqIjZA4/2VEurdeo96r3TzR83gCcKqY8wmVOa2z47V5cH3DS80A71Y0K3q04z+O5aq09GHnZZ8ohyhZCrONUhkH0Rj2fQS5iclAt25lfAh1tXCbBFD9CtZpp0HCmx/FuS1EU9JKKZAB+RQYWvDA5pR0oWosLuuj3PYfGLpBTvXsvAkyph5X0WISlFTm/M9GkFOz2IwUL0VmMg9eZw== ARC-Authentication-Results: i=1; mx.microsoft.com 1; spf=pass (sender ip is 149.199.62.198) smtp.rcpttodomain=linaro.org smtp.mailfrom=xilinx.com; dmarc=pass (p=none sp=none pct=100) action=none header.from=xilinx.com; dkim=none (message not signed); arc=none DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=xilinx.onmicrosoft.com; s=selector2-xilinx-onmicrosoft-com; h=From:Date:Subject:Message-ID:Content-Type:MIME-Version:X-MS-Exchange-SenderADCheck; bh=REIex1Djjp6zXM3cMB1tK9TmK4fgUwgcCpRIy5EhstQ=; b=hoNhp406xPj2yEW2i+BSqd7eWVplqVPwWYCromQbZkw/dUsuE7hY2/19Wa4HnGK4TrinhUzKFIdpds7GO4fVJT0V3BglOQ29VH0ezWIODlpDWPy5FB93ml8ilFNp2qFdB6Fl5TzJpgx5R5VM2I/T4+kJUm6t35hucEuebvVx+hQ= Received: from BN9PR03CA0519.namprd03.prod.outlook.com (2603:10b6:408:131::14) by SN1PR02MB3759.namprd02.prod.outlook.com (2603:10b6:802:2a::30) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384) id 15.20.4713.22; Tue, 23 Nov 2021 06:21:11 +0000 Received: from BN1NAM02FT046.eop-nam02.prod.protection.outlook.com (2603:10b6:408:131:cafe::19) by BN9PR03CA0519.outlook.office365.com (2603:10b6:408:131::14) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384) id 15.20.4713.19 via Frontend Transport; Tue, 23 Nov 2021 06:21:11 +0000 X-MS-Exchange-Authentication-Results: spf=pass (sender IP is 149.199.62.198) smtp.mailfrom=xilinx.com; dkim=none (message not signed) header.d=none;dmarc=pass action=none header.from=xilinx.com; Received-SPF: Pass (protection.outlook.com: domain of xilinx.com designates 149.199.62.198 as permitted sender) receiver=protection.outlook.com; client-ip=149.199.62.198; helo=xsj-pvapexch01.xlnx.xilinx.com; Received: from xsj-pvapexch01.xlnx.xilinx.com (149.199.62.198) by BN1NAM02FT046.mail.protection.outlook.com (10.13.3.181) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256) id 15.20.4713.19 via Frontend Transport; Tue, 23 Nov 2021 06:21:11 +0000 Received: from xsj-pvapexch02.xlnx.xilinx.com (172.19.86.41) by xsj-pvapexch01.xlnx.xilinx.com (172.19.86.40) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256) id 15.1.2176.14; Mon, 22 Nov 2021 22:20:54 -0800 Received: from smtp.xilinx.com (172.19.127.95) by xsj-pvapexch02.xlnx.xilinx.com (172.19.86.41) with Microsoft SMTP Server id 15.1.2176.14 via Frontend Transport; Mon, 22 Nov 2021 22:20:54 -0800 Envelope-to: bjorn.andersson@linaro.org, mathieu.poirier@linaro.org, robh+dt@kernel.org, laurent.pinchart@ideasonboard.com, bill.mills@linaro.org, linux-remoteproc@vger.kernel.org, linux-kernel@vger.kernel.org, devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org Received: from [172.19.3.14] (port=33042 helo=xsjtanmays50.xilinx.com) by smtp.xilinx.com with esmtp (Exim 4.90) (envelope-from ) id 1mpPAj-0001Zw-Q0; Mon, 22 Nov 2021 22:20:53 -0800 From: Tanmay Shah To: Bjorn Andersson , Mathieu Poirier , Rob Herring , Michal Simek CC: Laurent Pinchart , Ben Levinsky , Bill Mills , Sergei Korneichuk , Tanmay Shah , , , , Subject: [PATCH v2 2/6] arm64: dts: xilinx: zynqmp: Add RPU subsystem device node Date: Mon, 22 Nov 2021 22:20:46 -0800 Message-ID: <20211123062050.1442712-3-tanmay.shah@xilinx.com> X-Mailer: git-send-email 2.25.1 In-Reply-To: <20211123062050.1442712-1-tanmay.shah@xilinx.com> References: <20211123062050.1442712-1-tanmay.shah@xilinx.com> MIME-Version: 1.0 X-EOPAttributedMessage: 0 X-MS-PublicTrafficType: Email X-MS-Office365-Filtering-Correlation-Id: 0aa1a08b-1399-4b9d-9ace-08d9ae4971c5 X-MS-TrafficTypeDiagnostic: SN1PR02MB3759: X-Microsoft-Antispam-PRVS: X-Auto-Response-Suppress: DR, RN, NRN, OOF, AutoReply X-MS-Oob-TLC-OOBClassifiers: OLM:1201; X-MS-Exchange-SenderADCheck: 1 X-MS-Exchange-AntiSpam-Relay: 0 X-Microsoft-Antispam: BCL:0; X-Microsoft-Antispam-Message-Info: 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 X-Forefront-Antispam-Report: CIP:149.199.62.198;CTRY:US;LANG:en;SCL:1;SRV:;IPV:NLI;SFV:NSPM;H:xsj-pvapexch01.xlnx.xilinx.com;PTR:unknown-62-198.xilinx.com;CAT:NONE;SFS:(36840700001)(46966006)(26005)(8676002)(110136005)(54906003)(2906002)(5660300002)(1076003)(9786002)(36906005)(8936002)(7696005)(316002)(36756003)(83380400001)(508600001)(6666004)(4326008)(82310400004)(7636003)(2616005)(6636002)(36860700001)(336012)(70586007)(426003)(44832011)(70206006)(47076005)(186003)(356005)(102446001);DIR:OUT;SFP:1101; X-OriginatorOrg: xilinx.com X-MS-Exchange-CrossTenant-OriginalArrivalTime: 23 Nov 2021 06:21:11.2767 (UTC) X-MS-Exchange-CrossTenant-Network-Message-Id: 0aa1a08b-1399-4b9d-9ace-08d9ae4971c5 X-MS-Exchange-CrossTenant-Id: 657af505-d5df-48d0-8300-c31994686c5c X-MS-Exchange-CrossTenant-OriginalAttributedTenantConnectingIp: TenantId=657af505-d5df-48d0-8300-c31994686c5c;Ip=[149.199.62.198];Helo=[xsj-pvapexch01.xlnx.xilinx.com] X-MS-Exchange-CrossTenant-AuthSource: BN1NAM02FT046.eop-nam02.prod.protection.outlook.com X-MS-Exchange-CrossTenant-AuthAs: Anonymous X-MS-Exchange-CrossTenant-FromEntityHeader: HybridOnPrem X-MS-Exchange-Transport-CrossTenantHeadersStamped: SN1PR02MB3759 Precedence: bulk List-ID: X-Mailing-List: linux-remoteproc@vger.kernel.org RPU subsystem can be configured in cluster-mode or split mode. Also each r5 core has separate power domains. Signed-off-by: Tanmay Shah --- arch/arm64/boot/dts/xilinx/zynqmp.dtsi | 17 +++++++++++++++++ 1 file changed, 17 insertions(+) diff --git a/arch/arm64/boot/dts/xilinx/zynqmp.dtsi b/arch/arm64/boot/dts/xilinx/zynqmp.dtsi index 28dccb891a53..f4fb98ccb1b5 100644 --- a/arch/arm64/boot/dts/xilinx/zynqmp.dtsi +++ b/arch/arm64/boot/dts/xilinx/zynqmp.dtsi @@ -654,6 +654,23 @@ qspi: spi@ff0f0000 { power-domains = <&zynqmp_firmware PD_QSPI>; }; + r5fss: r5fss@ff9a0000 { + compatible = "xlnx,zynqmp-r5fss"; + xlnx,cluster-mode = <1>; + + reg = <0x0 0Xff9a0000 0x0 0x228>; + + r5f_core0: r5f-0 { + compatible = "xlnx,zynqmp-r5f"; + power-domains = <&zynqmp_firmware PD_RPU_0>; + }; + + r5f_core1: r5f-1 { + compatible = "xlnx,zynqmp-r5f"; + power-domains = <&zynqmp_firmware PD_RPU_1>; + }; + }; + psgtr: phy@fd400000 { compatible = "xlnx,zynqmp-psgtr-v1.1"; status = "disabled"; From patchwork Tue Nov 23 06:20:47 2021 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Tanmay Shah X-Patchwork-Id: 12633483 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id E6D84C4332F for ; Tue, 23 Nov 2021 06:21:05 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S233775AbhKWGYJ (ORCPT ); Tue, 23 Nov 2021 01:24:09 -0500 Received: from mail-dm6nam12on2081.outbound.protection.outlook.com ([40.107.243.81]:42276 "EHLO NAM12-DM6-obe.outbound.protection.outlook.com" rhost-flags-OK-OK-OK-FAIL) by vger.kernel.org with ESMTP id S233650AbhKWGYG (ORCPT ); Tue, 23 Nov 2021 01:24:06 -0500 ARC-Seal: i=1; a=rsa-sha256; s=arcselector9901; d=microsoft.com; cv=none; b=fUzEMjfgzNYTHQtZLPE/nwMHPifrSVcXQzd/vYZwFws+vxGxuB8S2zG29Wrtk5aJ8rCN6aGEL5FWg56lmWYu5YtC6Fu7ysqc+EIUPfZjU35bb68OpuVIfpUg+bWmRwGIQAOowxl2WGZNY+rQ3kXiSUmVUQIIOdEtGQiMweQqzOGLLDxFKZOx9pP9qcy3d0kFLGOG4WPWsJ9TL46JQRLVcBVenndXZTyKIqKYjDWs9wR98JmOOEJxAei1ck7XFEK94cvGOYXpDigjD3yQCdN8+evpnh+BWJt1VvQO0DbNzJzBIqzQpS7yEwMcdfvl2gNCVM1RKvHXfRQKNG5VD3otmA== ARC-Message-Signature: i=1; a=rsa-sha256; c=relaxed/relaxed; d=microsoft.com; s=arcselector9901; h=From:Date:Subject:Message-ID:Content-Type:MIME-Version:X-MS-Exchange-AntiSpam-MessageData-ChunkCount:X-MS-Exchange-AntiSpam-MessageData-0:X-MS-Exchange-AntiSpam-MessageData-1; bh=WwtMsotdU1adb1UNXyWOgIh5UNRAKrlqBFtglLEOu4E=; b=VFuFOl5u2ogZ5H0W9CVFMD+NkBKR5cjzg9cvHEM6baPGY0/wyCQ5DyjikmUMw9XPuETeMHaTzkuXlaCKkiNMvnRdCjZMHr7XD3XcMbzLFmFlzqZRV4UnctilQQ1EKK1nUZAL4ABxZJIWkOCv8zIyx9AQzjwZECx6mQ+fSoGVJk1GLEPV6uQvVAiNvQErlB6Xh1gsSlQ76iAJrm2YwgsxIZuq5bodh0zWs3pXF+YJ23kA/EIRwgDVvgfXvE5BxV2onygg+S40rGVX7w4e3fbhbtZTi08uIukDK7ffaRQ/3ZhyH1wycVaecueVlPCnbCj4f2Shn3QDlhtW5smgy1zIxA== ARC-Authentication-Results: i=1; mx.microsoft.com 1; spf=pass (sender ip is 149.199.62.198) smtp.rcpttodomain=linaro.org smtp.mailfrom=xilinx.com; dmarc=pass (p=none sp=none pct=100) action=none header.from=xilinx.com; dkim=none (message not signed); arc=none DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=xilinx.onmicrosoft.com; s=selector2-xilinx-onmicrosoft-com; h=From:Date:Subject:Message-ID:Content-Type:MIME-Version:X-MS-Exchange-SenderADCheck; bh=WwtMsotdU1adb1UNXyWOgIh5UNRAKrlqBFtglLEOu4E=; b=a7mt8jdWPuRYedKSn/4661o8UY/X0SSWSeLqccpGIGgQklqhA8Pxmz0m3xDDcB/jadWHtnPRF7/53hxtg28ba0u9RATNo0B2l+OoHfh2x2hqG+6NxPTPgQdEN0EZPgZN6oYlfBA/vDAkr7LayC5QWjjVnV42EIP5zYcpuaZz4L4= Received: from BN6PR11CA0005.namprd11.prod.outlook.com (2603:10b6:405:2::15) by SN4PR0201MB3552.namprd02.prod.outlook.com (2603:10b6:803:45::10) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384) id 15.20.4713.19; Tue, 23 Nov 2021 06:20:55 +0000 Received: from BN1NAM02FT020.eop-nam02.prod.protection.outlook.com (2603:10b6:405:2:cafe::1) by BN6PR11CA0005.outlook.office365.com (2603:10b6:405:2::15) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384) id 15.20.4713.25 via Frontend Transport; Tue, 23 Nov 2021 06:20:55 +0000 X-MS-Exchange-Authentication-Results: spf=pass (sender IP is 149.199.62.198) smtp.mailfrom=xilinx.com; dkim=none (message not signed) header.d=none;dmarc=pass action=none header.from=xilinx.com; Received-SPF: Pass (protection.outlook.com: domain of xilinx.com designates 149.199.62.198 as permitted sender) receiver=protection.outlook.com; client-ip=149.199.62.198; helo=xsj-pvapexch01.xlnx.xilinx.com; Received: from xsj-pvapexch01.xlnx.xilinx.com (149.199.62.198) by BN1NAM02FT020.mail.protection.outlook.com (10.13.2.135) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256) id 15.20.4713.19 via Frontend Transport; Tue, 23 Nov 2021 06:20:55 +0000 Received: from xsj-pvapexch02.xlnx.xilinx.com (172.19.86.41) by xsj-pvapexch01.xlnx.xilinx.com (172.19.86.40) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256) id 15.1.2176.14; Mon, 22 Nov 2021 22:20:54 -0800 Received: from smtp.xilinx.com (172.19.127.95) by xsj-pvapexch02.xlnx.xilinx.com (172.19.86.41) with Microsoft SMTP Server id 15.1.2176.14 via Frontend Transport; Mon, 22 Nov 2021 22:20:54 -0800 Envelope-to: bjorn.andersson@linaro.org, mathieu.poirier@linaro.org, robh+dt@kernel.org, laurent.pinchart@ideasonboard.com, bill.mills@linaro.org, linux-remoteproc@vger.kernel.org, linux-kernel@vger.kernel.org, devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org Received: from [172.19.3.14] (port=33042 helo=xsjtanmays50.xilinx.com) by smtp.xilinx.com with esmtp (Exim 4.90) (envelope-from ) id 1mpPAk-0001Zw-0l; Mon, 22 Nov 2021 22:20:54 -0800 From: Tanmay Shah To: Bjorn Andersson , Mathieu Poirier , Rob Herring , Michal Simek CC: Laurent Pinchart , Ben Levinsky , Bill Mills , Sergei Korneichuk , Tanmay Shah , , , , Subject: [PATCH v2 3/6] firmware: xilinx: Add ZynqMP firmware ioctl enums for RPU configuration. Date: Mon, 22 Nov 2021 22:20:47 -0800 Message-ID: <20211123062050.1442712-4-tanmay.shah@xilinx.com> X-Mailer: git-send-email 2.25.1 In-Reply-To: <20211123062050.1442712-1-tanmay.shah@xilinx.com> References: <20211123062050.1442712-1-tanmay.shah@xilinx.com> MIME-Version: 1.0 X-EOPAttributedMessage: 0 X-MS-PublicTrafficType: Email X-MS-Office365-Filtering-Correlation-Id: dbeb69bc-90f3-4585-60d0-08d9ae496833 X-MS-TrafficTypeDiagnostic: SN4PR0201MB3552: X-Microsoft-Antispam-PRVS: X-Auto-Response-Suppress: DR, RN, NRN, OOF, AutoReply X-MS-Oob-TLC-OOBClassifiers: OLM:525; X-MS-Exchange-SenderADCheck: 1 X-MS-Exchange-AntiSpam-Relay: 0 X-Microsoft-Antispam: BCL:0; X-Microsoft-Antispam-Message-Info: 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 X-Forefront-Antispam-Report: CIP:149.199.62.198;CTRY:US;LANG:en;SCL:1;SRV:;IPV:NLI;SFV:NSPM;H:xsj-pvapexch01.xlnx.xilinx.com;PTR:unknown-62-198.xilinx.com;CAT:NONE;SFS:(36840700001)(46966006)(1076003)(83380400001)(36906005)(7696005)(5660300002)(6636002)(7636003)(316002)(36756003)(110136005)(426003)(8936002)(6666004)(82310400004)(44832011)(2906002)(54906003)(4326008)(356005)(9786002)(186003)(70206006)(8676002)(336012)(26005)(36860700001)(2616005)(47076005)(70586007)(508600001)(102446001);DIR:OUT;SFP:1101; X-OriginatorOrg: xilinx.com X-MS-Exchange-CrossTenant-OriginalArrivalTime: 23 Nov 2021 06:20:55.2189 (UTC) X-MS-Exchange-CrossTenant-Network-Message-Id: dbeb69bc-90f3-4585-60d0-08d9ae496833 X-MS-Exchange-CrossTenant-Id: 657af505-d5df-48d0-8300-c31994686c5c X-MS-Exchange-CrossTenant-OriginalAttributedTenantConnectingIp: TenantId=657af505-d5df-48d0-8300-c31994686c5c;Ip=[149.199.62.198];Helo=[xsj-pvapexch01.xlnx.xilinx.com] X-MS-Exchange-CrossTenant-AuthSource: BN1NAM02FT020.eop-nam02.prod.protection.outlook.com X-MS-Exchange-CrossTenant-AuthAs: Anonymous X-MS-Exchange-CrossTenant-FromEntityHeader: HybridOnPrem X-MS-Exchange-Transport-CrossTenantHeadersStamped: SN4PR0201MB3552 Precedence: bulk List-ID: X-Mailing-List: linux-remoteproc@vger.kernel.org From: Ben Levinsky Add ZynqMP firmware ioctl enums for RPU configuration and TCM Nodes for later use via request_node and release_node Signed-off-by: Ben Levinsky Signed-off-by: Tanmay Shah --- include/linux/firmware/xlnx-zynqmp.h | 19 +++++++++++++++++++ 1 file changed, 19 insertions(+) diff --git a/include/linux/firmware/xlnx-zynqmp.h b/include/linux/firmware/xlnx-zynqmp.h index 56b426fe020c..92bf3ae20524 100644 --- a/include/linux/firmware/xlnx-zynqmp.h +++ b/include/linux/firmware/xlnx-zynqmp.h @@ -111,6 +111,10 @@ enum pm_ret_status { }; enum pm_ioctl_id { + IOCTL_GET_RPU_OPER_MODE = 0, + IOCTL_SET_RPU_OPER_MODE = 1, + IOCTL_RPU_BOOT_ADDR_CONFIG = 2, + IOCTL_TCM_COMB_CONFIG = 3, IOCTL_SD_DLL_RESET = 6, IOCTL_SET_SD_TAPDELAY = 7, IOCTL_SET_PLL_FRAC_MODE = 8, @@ -142,6 +146,21 @@ enum pm_query_id { PM_QID_CLOCK_GET_MAX_DIVISOR = 13, }; +enum rpu_oper_mode { + PM_RPU_MODE_LOCKSTEP = 0, + PM_RPU_MODE_SPLIT = 1, +}; + +enum rpu_boot_mem { + PM_RPU_BOOTMEM_LOVEC = 0, + PM_RPU_BOOTMEM_HIVEC = 1, +}; + +enum rpu_tcm_comb { + PM_RPU_TCM_SPLIT = 0, + PM_RPU_TCM_COMB = 1, +}; + enum zynqmp_pm_reset_action { PM_RESET_ACTION_RELEASE = 0, PM_RESET_ACTION_ASSERT = 1, From patchwork Tue Nov 23 06:20:48 2021 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Tanmay Shah X-Patchwork-Id: 12633485 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id CF482C433EF for ; Tue, 23 Nov 2021 06:21:05 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S229722AbhKWGYI (ORCPT ); Tue, 23 Nov 2021 01:24:08 -0500 Received: from mail-mw2nam12on2049.outbound.protection.outlook.com ([40.107.244.49]:52929 "EHLO NAM12-MW2-obe.outbound.protection.outlook.com" rhost-flags-OK-OK-OK-FAIL) by vger.kernel.org with ESMTP id S230234AbhKWGYF (ORCPT ); Tue, 23 Nov 2021 01:24:05 -0500 ARC-Seal: i=1; a=rsa-sha256; s=arcselector9901; d=microsoft.com; cv=none; b=kpqDiIbBPJad7GSmlcsTx1cO7lvoej6tkIWV6K5CSJF860jWBV20ysITjiT33HTybOyolXTULT2DTfmRLmhOey/dgKN6/XlLyGO+63409Y7VXE040b4FshUoBegAKm628RP3bvCmn3JhRWfK/EUV5kv/rq+1I99zriirQVMk3LLL/AApvNpOvk/YrQNhNhs9lfwFEKNvsYbfGDu7TvJcHBrZuNQc8JASenuquK6FFyLXyhvfO7QHZ2IQhglmLUS5h9pd/OxdAb5qOtoroZzenUrttf1Rg5VEFzCaSJQnyjq0KZiKFX2nsJxpTda1WD6OsYI5TYX26Bdnt3XiaysThQ== ARC-Message-Signature: i=1; a=rsa-sha256; c=relaxed/relaxed; d=microsoft.com; s=arcselector9901; h=From:Date:Subject:Message-ID:Content-Type:MIME-Version:X-MS-Exchange-AntiSpam-MessageData-ChunkCount:X-MS-Exchange-AntiSpam-MessageData-0:X-MS-Exchange-AntiSpam-MessageData-1; bh=55/mDqgsqpC1dh5nICVSdxyPBCVtAxolPPZA7SRCvyc=; b=eOebhknk9JPi+qugldBOBTSiyPd4u8p5E0P4D24ZhvHrSXqm6meMy1H/T8DADoOxrJKAvmZdC4zjY17DQEyocBCxDzTp6iXTwwFer9XVVIrBwrNDOJdmTNhlwahCjKQWz1uMJjz7XJSialyWO3ReBSQhhO18I9WjEx+w1VwxYBiKpoDlp51NqypUoalgG6pYNquAamkBLcR5F+nDaj+EM8R35IFnRpPPLOu3ltoPb59fxByf6TQpj8/4MhvQCuYDaRtOehBJJCgbVDnkX4PKPKwcAyDNcxnM3hre6yCCW4tfq0vvvmTxMxnzi7wye0GA456dCmoNgle+DFs8R9h9Jg== ARC-Authentication-Results: i=1; mx.microsoft.com 1; spf=pass (sender ip is 149.199.62.198) smtp.rcpttodomain=linaro.org smtp.mailfrom=xilinx.com; dmarc=pass (p=none sp=none pct=100) action=none header.from=xilinx.com; dkim=none (message not signed); arc=none DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=xilinx.onmicrosoft.com; s=selector2-xilinx-onmicrosoft-com; h=From:Date:Subject:Message-ID:Content-Type:MIME-Version:X-MS-Exchange-SenderADCheck; bh=55/mDqgsqpC1dh5nICVSdxyPBCVtAxolPPZA7SRCvyc=; b=PzbotOLyOmCFnzKazeHDt7T1zh1kIGJIaLQepFv25JEFVp1tyxcuWPbzK4kj/zJD0SPqP+6GTZpBIKNT5Te4xnZWYn8duVvhzTKB2s71s6zaNZi32pu18ffRAFg2iKnpY9/We1TJPUC7JS8od3b2uFgNaBLzy944NAYCPRqwO0I= Received: from SA9PR13CA0132.namprd13.prod.outlook.com (2603:10b6:806:27::17) by SJ0PR02MB7663.namprd02.prod.outlook.com (2603:10b6:a03:32f::14) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384) id 15.20.4713.22; Tue, 23 Nov 2021 06:20:55 +0000 Received: from SN1NAM02FT0045.eop-nam02.prod.protection.outlook.com (2603:10b6:806:27:cafe::68) by SA9PR13CA0132.outlook.office365.com (2603:10b6:806:27::17) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384) id 15.20.4734.11 via Frontend Transport; Tue, 23 Nov 2021 06:20:55 +0000 X-MS-Exchange-Authentication-Results: spf=pass (sender IP is 149.199.62.198) smtp.mailfrom=xilinx.com; dkim=none (message not signed) header.d=none;dmarc=pass action=none header.from=xilinx.com; Received-SPF: Pass (protection.outlook.com: domain of xilinx.com designates 149.199.62.198 as permitted sender) receiver=protection.outlook.com; client-ip=149.199.62.198; helo=xsj-pvapexch02.xlnx.xilinx.com; Received: from xsj-pvapexch02.xlnx.xilinx.com (149.199.62.198) by SN1NAM02FT0045.mail.protection.outlook.com (10.97.5.234) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256) id 15.20.4713.19 via Frontend Transport; Tue, 23 Nov 2021 06:20:55 +0000 Received: from xsj-pvapexch02.xlnx.xilinx.com (172.19.86.41) by xsj-pvapexch02.xlnx.xilinx.com (172.19.86.41) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256) id 15.1.2176.14; Mon, 22 Nov 2021 22:20:54 -0800 Received: from smtp.xilinx.com (172.19.127.95) by xsj-pvapexch02.xlnx.xilinx.com (172.19.86.41) with Microsoft SMTP Server id 15.1.2176.14 via Frontend Transport; Mon, 22 Nov 2021 22:20:54 -0800 Envelope-to: bjorn.andersson@linaro.org, mathieu.poirier@linaro.org, robh+dt@kernel.org, laurent.pinchart@ideasonboard.com, bill.mills@linaro.org, linux-remoteproc@vger.kernel.org, linux-kernel@vger.kernel.org, devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org Received: from [172.19.3.14] (port=33042 helo=xsjtanmays50.xilinx.com) by smtp.xilinx.com with esmtp (Exim 4.90) (envelope-from ) id 1mpPAk-0001Zw-1k; Mon, 22 Nov 2021 22:20:54 -0800 From: Tanmay Shah To: Bjorn Andersson , Mathieu Poirier , Rob Herring , Michal Simek CC: Laurent Pinchart , Ben Levinsky , Bill Mills , Sergei Korneichuk , Tanmay Shah , , , , Subject: [PATCH v2 4/6] firmware: xilinx: Add shutdown/wakeup APIs Date: Mon, 22 Nov 2021 22:20:48 -0800 Message-ID: <20211123062050.1442712-5-tanmay.shah@xilinx.com> X-Mailer: git-send-email 2.25.1 In-Reply-To: <20211123062050.1442712-1-tanmay.shah@xilinx.com> References: <20211123062050.1442712-1-tanmay.shah@xilinx.com> MIME-Version: 1.0 X-EOPAttributedMessage: 0 X-MS-PublicTrafficType: Email X-MS-Office365-Filtering-Correlation-Id: 4bf5fd42-74c9-4e50-7835-08d9ae496812 X-MS-TrafficTypeDiagnostic: SJ0PR02MB7663: X-Microsoft-Antispam-PRVS: X-Auto-Response-Suppress: DR, RN, NRN, OOF, AutoReply X-MS-Oob-TLC-OOBClassifiers: OLM:4941; X-MS-Exchange-SenderADCheck: 1 X-MS-Exchange-AntiSpam-Relay: 0 X-Microsoft-Antispam: BCL:0; X-Microsoft-Antispam-Message-Info: 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 X-Forefront-Antispam-Report: CIP:149.199.62.198;CTRY:US;LANG:en;SCL:1;SRV:;IPV:NLI;SFV:NSPM;H:xsj-pvapexch02.xlnx.xilinx.com;PTR:unknown-62-198.xilinx.com;CAT:NONE;SFS:(36840700001)(46966006)(54906003)(47076005)(36860700001)(186003)(36756003)(83380400001)(2906002)(4326008)(6666004)(2616005)(7636003)(9786002)(6636002)(110136005)(26005)(1076003)(8936002)(316002)(36906005)(356005)(336012)(5660300002)(426003)(70586007)(44832011)(508600001)(8676002)(70206006)(7696005)(82310400004)(102446001);DIR:OUT;SFP:1101; X-OriginatorOrg: xilinx.com X-MS-Exchange-CrossTenant-OriginalArrivalTime: 23 Nov 2021 06:20:55.0712 (UTC) X-MS-Exchange-CrossTenant-Network-Message-Id: 4bf5fd42-74c9-4e50-7835-08d9ae496812 X-MS-Exchange-CrossTenant-Id: 657af505-d5df-48d0-8300-c31994686c5c X-MS-Exchange-CrossTenant-OriginalAttributedTenantConnectingIp: TenantId=657af505-d5df-48d0-8300-c31994686c5c;Ip=[149.199.62.198];Helo=[xsj-pvapexch02.xlnx.xilinx.com] X-MS-Exchange-CrossTenant-AuthSource: SN1NAM02FT0045.eop-nam02.prod.protection.outlook.com X-MS-Exchange-CrossTenant-AuthAs: Anonymous X-MS-Exchange-CrossTenant-FromEntityHeader: HybridOnPrem X-MS-Exchange-Transport-CrossTenantHeadersStamped: SJ0PR02MB7663 Precedence: bulk List-ID: X-Mailing-List: linux-remoteproc@vger.kernel.org From: Ben Levinsky Add shutdown/wakeup a resource eemi operations to shutdown or bringup a resource. Note alignment of args matches convention of other fn's in this file. The reason being that the long fn name results in aligned args that otherwise go over 80 chars so shift right to avoid this Signed-off-by: Ben Levinsky Signed-off-by: Tanmay Shah --- drivers/firmware/xilinx/zynqmp.c | 35 ++++++++++++++++++++++++++++ include/linux/firmware/xlnx-zynqmp.h | 23 ++++++++++++++++++ 2 files changed, 58 insertions(+) diff --git a/drivers/firmware/xilinx/zynqmp.c b/drivers/firmware/xilinx/zynqmp.c index a3cadbaf3cba..e772404235c1 100644 --- a/drivers/firmware/xilinx/zynqmp.c +++ b/drivers/firmware/xilinx/zynqmp.c @@ -990,6 +990,41 @@ int zynqmp_pm_release_node(const u32 node) } EXPORT_SYMBOL_GPL(zynqmp_pm_release_node); +/** + * zynqmp_pm_force_pwrdwn - PM call to request for another PU or subsystem to + * be powered down forcefully + * @node: Node ID of the targeted PU or subsystem + * @ack: Flag to specify whether acknowledge is requested + * + * Return: status, either success or error+reason + */ +int zynqmp_pm_force_pwrdwn(const u32 node, + const enum zynqmp_pm_request_ack ack) +{ + return zynqmp_pm_invoke_fn(PM_FORCE_POWERDOWN, node, ack, 0, 0, NULL); +} +EXPORT_SYMBOL_GPL(zynqmp_pm_force_pwrdwn); + +/** + * zynqmp_pm_request_wake - PM call to wake up selected master or subsystem + * @node: Node ID of the master or subsystem + * @set_addr: Specifies whether the address argument is relevant + * @address: Address from which to resume when woken up + * @ack: Flag to specify whether acknowledge requested + * + * Return: status, either success or error+reason + */ +int zynqmp_pm_request_wake(const u32 node, + const bool set_addr, + const u64 address, + const enum zynqmp_pm_request_ack ack) +{ + /* set_addr flag is encoded into 1st bit of address */ + return zynqmp_pm_invoke_fn(PM_REQUEST_WAKEUP, node, address | set_addr, + address >> 32, ack, NULL); +} +EXPORT_SYMBOL_GPL(zynqmp_pm_request_wake); + /** * zynqmp_pm_set_requirement() - PM call to set requirement for PM slaves * @node: Node ID of the slave diff --git a/include/linux/firmware/xlnx-zynqmp.h b/include/linux/firmware/xlnx-zynqmp.h index 92bf3ae20524..5da3d490e80e 100644 --- a/include/linux/firmware/xlnx-zynqmp.h +++ b/include/linux/firmware/xlnx-zynqmp.h @@ -12,6 +12,7 @@ #ifndef __FIRMWARE_ZYNQMP_H__ #define __FIRMWARE_ZYNQMP_H__ +#include #include @@ -66,6 +67,8 @@ enum pm_api_id { PM_GET_API_VERSION = 1, + PM_FORCE_POWERDOWN = 8, + PM_REQUEST_WAKEUP = 10, PM_SYSTEM_SHUTDOWN = 12, PM_REQUEST_NODE = 13, PM_RELEASE_NODE = 14, @@ -435,6 +438,12 @@ int zynqmp_pm_pinctrl_get_config(const u32 pin, const u32 param, int zynqmp_pm_pinctrl_set_config(const u32 pin, const u32 param, u32 value); int zynqmp_pm_load_pdi(const u32 src, const u64 address); +int zynqmp_pm_force_pwrdwn(const u32 target, + const enum zynqmp_pm_request_ack ack); +int zynqmp_pm_request_wake(const u32 node, + const bool set_addr, + const u64 address, + const enum zynqmp_pm_request_ack ack); #else static inline int zynqmp_pm_get_api_version(u32 *version) { @@ -620,6 +629,12 @@ static inline int zynqmp_pm_pinctrl_request(const u32 pin) return -ENODEV; } +static inline int zynqmp_pm_force_pwrdwn(const u32 target, + const enum zynqmp_pm_request_ack ack) +{ + return -ENODEV; +} + static inline int zynqmp_pm_pinctrl_release(const u32 pin) { return -ENODEV; @@ -651,6 +666,14 @@ static inline int zynqmp_pm_load_pdi(const u32 src, const u64 address) { return -ENODEV; } + +static inline int zynqmp_pm_request_wake(const u32 node, + const bool set_addr, + const u64 address, + const enum zynqmp_pm_request_ack ack) +{ + return -ENODEV; +} #endif #endif /* __FIRMWARE_ZYNQMP_H__ */ From patchwork Tue Nov 23 06:20:49 2021 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Tanmay Shah X-Patchwork-Id: 12633487 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id 41649C433EF for ; Tue, 23 Nov 2021 06:21:17 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S229816AbhKWGYX (ORCPT ); Tue, 23 Nov 2021 01:24:23 -0500 Received: from mail-bn8nam11on2062.outbound.protection.outlook.com ([40.107.236.62]:65089 "EHLO NAM11-BN8-obe.outbound.protection.outlook.com" rhost-flags-OK-OK-OK-FAIL) by vger.kernel.org with ESMTP id S233740AbhKWGYU (ORCPT ); Tue, 23 Nov 2021 01:24:20 -0500 ARC-Seal: i=1; a=rsa-sha256; s=arcselector9901; d=microsoft.com; cv=none; b=IVZvoGuf5/TzagUwZAVKx7UkoKMLt0izGBVJdIKDnLj1X26FgHRXf6OKf8+uui1WY2m8RD/4+EOAxBPqy7ER3x6PROajyMoQUBpzyCq0bDk0JlvmX9iD14Fh9qC6lqLFABny+mwstswXLK+VtyY2k49JzowPooxe+5Ny2wotoITbw7bLlyKP/N0m0hOxs/V5o+zmBVmbHjtfKSSXK1QcyAr7wfqOzZ/3U3PpzFjcAaT79OINMdrzICntnQ/B6LdUuJnWf3N4pgzxKqSB1SI3dCTq6jrQpmj6QV8MmfbUHp1f6by62zT/XkYf68+795GLp4PKdcJrxke9B00m8/C9Mg== ARC-Message-Signature: i=1; a=rsa-sha256; c=relaxed/relaxed; d=microsoft.com; s=arcselector9901; h=From:Date:Subject:Message-ID:Content-Type:MIME-Version:X-MS-Exchange-AntiSpam-MessageData-ChunkCount:X-MS-Exchange-AntiSpam-MessageData-0:X-MS-Exchange-AntiSpam-MessageData-1; bh=Rygpenm2xrjI7ZUrIbGAWqpi+DPbrOdNInErZybvbfE=; b=NR6kf1G/lg+XZifLAKumt0F0CQwSSONqW84bcBQGxAix91j/QICbrEdEjwHl9WZHkwDE3rctOEvYrtqYyekPwTSi75r+RSXeY+X3uzSX0A7a51CSIc/8k/OkbTvBAFCJJK0FwpSb2K1PzmxQkRFCgDpBPCAgrUtBcfGu72dG5bwBrVptj3OH2iV+M3lttlP/GiZQn5l4HB9KCb4EfsJlfm/O8uXv0ruTcILwNqi8RWEdZM54afv0XlnygXM/p7a4bKm9dK+DoN315dwVxdm45COzYiCoYtA08dURY4aS1vWRJ+lIeHXrg42y8Ogu57GBYNKN2vxKxqp7lu4T69+tyQ== ARC-Authentication-Results: i=1; mx.microsoft.com 1; spf=pass (sender ip is 149.199.62.198) smtp.rcpttodomain=linaro.org smtp.mailfrom=xilinx.com; dmarc=pass (p=none sp=none pct=100) action=none header.from=xilinx.com; dkim=none (message not signed); arc=none DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=xilinx.onmicrosoft.com; s=selector2-xilinx-onmicrosoft-com; h=From:Date:Subject:Message-ID:Content-Type:MIME-Version:X-MS-Exchange-SenderADCheck; bh=Rygpenm2xrjI7ZUrIbGAWqpi+DPbrOdNInErZybvbfE=; b=TK3xZpZtI+9TPHTd3Mg1bB0Bb3h7J5UVIMbI7+Jb7kETheSTPvQ4x3PRY8Bk240cqVugpKHWXfKLpO2VNcYAdKXtDXLIIVNX4fAUzDx2HI7YqMBH0RiND9H5QtlCQT+XbeqGnO30GwzH/d3KziXQ6aICFH+EP8saqWKBZ+v7a8s= Received: from BN9PR03CA0525.namprd03.prod.outlook.com (2603:10b6:408:131::20) by SA2PR02MB7788.namprd02.prod.outlook.com (2603:10b6:806:135::13) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384) id 15.20.4713.19; Tue, 23 Nov 2021 06:21:11 +0000 Received: from BN1NAM02FT046.eop-nam02.prod.protection.outlook.com (2603:10b6:408:131:cafe::99) by BN9PR03CA0525.outlook.office365.com (2603:10b6:408:131::20) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384) id 15.20.4713.20 via Frontend Transport; Tue, 23 Nov 2021 06:21:10 +0000 X-MS-Exchange-Authentication-Results: spf=pass (sender IP is 149.199.62.198) smtp.mailfrom=xilinx.com; dkim=none (message not signed) header.d=none;dmarc=pass action=none header.from=xilinx.com; Received-SPF: Pass (protection.outlook.com: domain of xilinx.com designates 149.199.62.198 as permitted sender) receiver=protection.outlook.com; client-ip=149.199.62.198; helo=xsj-pvapexch01.xlnx.xilinx.com; Received: from xsj-pvapexch01.xlnx.xilinx.com (149.199.62.198) by BN1NAM02FT046.mail.protection.outlook.com (10.13.3.181) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256) id 15.20.4713.19 via Frontend Transport; Tue, 23 Nov 2021 06:21:10 +0000 Received: from xsj-pvapexch02.xlnx.xilinx.com (172.19.86.41) by xsj-pvapexch01.xlnx.xilinx.com (172.19.86.40) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256) id 15.1.2176.14; Mon, 22 Nov 2021 22:20:54 -0800 Received: from smtp.xilinx.com (172.19.127.95) by xsj-pvapexch02.xlnx.xilinx.com (172.19.86.41) with Microsoft SMTP Server id 15.1.2176.14 via Frontend Transport; Mon, 22 Nov 2021 22:20:54 -0800 Envelope-to: bjorn.andersson@linaro.org, mathieu.poirier@linaro.org, robh+dt@kernel.org, laurent.pinchart@ideasonboard.com, bill.mills@linaro.org, linux-remoteproc@vger.kernel.org, linux-kernel@vger.kernel.org, devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org Received: from [172.19.3.14] (port=33042 helo=xsjtanmays50.xilinx.com) by smtp.xilinx.com with esmtp (Exim 4.90) (envelope-from ) id 1mpPAk-0001Zw-3R; Mon, 22 Nov 2021 22:20:54 -0800 From: Tanmay Shah To: Bjorn Andersson , Mathieu Poirier , Rob Herring , Michal Simek CC: Laurent Pinchart , Ben Levinsky , Bill Mills , Sergei Korneichuk , Tanmay Shah , , , , Subject: [PATCH v2 5/6] firmware: xilinx: Add RPU configuration APIs Date: Mon, 22 Nov 2021 22:20:49 -0800 Message-ID: <20211123062050.1442712-6-tanmay.shah@xilinx.com> X-Mailer: git-send-email 2.25.1 In-Reply-To: <20211123062050.1442712-1-tanmay.shah@xilinx.com> References: <20211123062050.1442712-1-tanmay.shah@xilinx.com> MIME-Version: 1.0 X-EOPAttributedMessage: 0 X-MS-PublicTrafficType: Email X-MS-Office365-Filtering-Correlation-Id: 45dcde2a-eddc-47f8-6e08-08d9ae497178 X-MS-TrafficTypeDiagnostic: SA2PR02MB7788: X-Microsoft-Antispam-PRVS: X-Auto-Response-Suppress: DR, RN, NRN, OOF, AutoReply X-MS-Oob-TLC-OOBClassifiers: OLM:820; X-MS-Exchange-SenderADCheck: 1 X-MS-Exchange-AntiSpam-Relay: 0 X-Microsoft-Antispam: BCL:0; X-Microsoft-Antispam-Message-Info: 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 X-Forefront-Antispam-Report: CIP:149.199.62.198;CTRY:US;LANG:en;SCL:1;SRV:;IPV:NLI;SFV:NSPM;H:xsj-pvapexch01.xlnx.xilinx.com;PTR:unknown-62-198.xilinx.com;CAT:NONE;SFS:(46966006)(36840700001)(7696005)(2616005)(47076005)(1076003)(6636002)(5660300002)(426003)(82310400004)(356005)(7636003)(44832011)(36756003)(336012)(186003)(54906003)(4326008)(36906005)(508600001)(70206006)(316002)(8936002)(36860700001)(8676002)(110136005)(2906002)(9786002)(6666004)(70586007)(83380400001)(26005)(102446001);DIR:OUT;SFP:1101; X-OriginatorOrg: xilinx.com X-MS-Exchange-CrossTenant-OriginalArrivalTime: 23 Nov 2021 06:21:10.7700 (UTC) X-MS-Exchange-CrossTenant-Network-Message-Id: 45dcde2a-eddc-47f8-6e08-08d9ae497178 X-MS-Exchange-CrossTenant-Id: 657af505-d5df-48d0-8300-c31994686c5c X-MS-Exchange-CrossTenant-OriginalAttributedTenantConnectingIp: TenantId=657af505-d5df-48d0-8300-c31994686c5c;Ip=[149.199.62.198];Helo=[xsj-pvapexch01.xlnx.xilinx.com] X-MS-Exchange-CrossTenant-AuthSource: BN1NAM02FT046.eop-nam02.prod.protection.outlook.com X-MS-Exchange-CrossTenant-AuthAs: Anonymous X-MS-Exchange-CrossTenant-FromEntityHeader: HybridOnPrem X-MS-Exchange-Transport-CrossTenantHeadersStamped: SA2PR02MB7788 Precedence: bulk List-ID: X-Mailing-List: linux-remoteproc@vger.kernel.org From: Ben Levinsky This patch adds APIs to access to configure RPU and its processor-specific memory. That is query the run-time mode of RPU as either split or lockstep as well as API to set this mode. In addition add APIs to access configuration of the RPUs' tightly coupled memory (TCM). Signed-off-by: Ben Levinsky Signed-off-by: Tanmay Shah --- drivers/firmware/xilinx/zynqmp.c | 61 ++++++++++++++++++++++++++++ include/linux/firmware/xlnx-zynqmp.h | 18 ++++++++ 2 files changed, 79 insertions(+) diff --git a/drivers/firmware/xilinx/zynqmp.c b/drivers/firmware/xilinx/zynqmp.c index e772404235c1..908d5b0d6947 100644 --- a/drivers/firmware/xilinx/zynqmp.c +++ b/drivers/firmware/xilinx/zynqmp.c @@ -990,6 +990,67 @@ int zynqmp_pm_release_node(const u32 node) } EXPORT_SYMBOL_GPL(zynqmp_pm_release_node); +/** + * zynqmp_pm_get_rpu_mode() - Get RPU mode + * @node_id: Node ID of the device + * @rpu_mode: return by reference value + * either split or lockstep + * + * Return: return 0 on success or error+reason. + * if success, then rpu_mode will be set + * to current rpu mode. + */ +int zynqmp_pm_get_rpu_mode(u32 node_id, enum rpu_oper_mode *rpu_mode) +{ + u32 ret_payload[PAYLOAD_ARG_CNT]; + int ret; + + ret = zynqmp_pm_invoke_fn(PM_IOCTL, node_id, + IOCTL_GET_RPU_OPER_MODE, 0, 0, ret_payload); + + /* only set rpu_mode if no error */ + if (ret == XST_PM_SUCCESS) + *rpu_mode = ret_payload[0]; + + return ret; +} +EXPORT_SYMBOL_GPL(zynqmp_pm_get_rpu_mode); + +/** + * zynqmp_pm_set_rpu_mode() - Set RPU mode + * @node_id: Node ID of the device + * @rpu_mode: Argument 1 to requested IOCTL call. either split or lockstep + * + * This function is used to set RPU mode to split or + * lockstep + * + * Return: Returns status, either success or error+reason + */ +int zynqmp_pm_set_rpu_mode(u32 node_id, enum rpu_oper_mode rpu_mode) +{ + return zynqmp_pm_invoke_fn(PM_IOCTL, node_id, + IOCTL_SET_RPU_OPER_MODE, (u32)rpu_mode, + 0, NULL); +} +EXPORT_SYMBOL_GPL(zynqmp_pm_set_rpu_mode); + +/** + * zynqmp_pm_set_tcm_config - configure TCM + * @tcm_mode: Argument 1 to requested IOCTL call + * either PM_RPU_TCM_COMB or PM_RPU_TCM_SPLIT + * + * This function is used to set RPU mode to split or combined + * + * Return: status: 0 for success, else failure + */ +int zynqmp_pm_set_tcm_config(u32 node_id, enum rpu_tcm_comb tcm_mode) +{ + return zynqmp_pm_invoke_fn(PM_IOCTL, node_id, + IOCTL_TCM_COMB_CONFIG, (u32)tcm_mode, 0, + NULL); +} +EXPORT_SYMBOL_GPL(zynqmp_pm_set_tcm_config); + /** * zynqmp_pm_force_pwrdwn - PM call to request for another PU or subsystem to * be powered down forcefully diff --git a/include/linux/firmware/xlnx-zynqmp.h b/include/linux/firmware/xlnx-zynqmp.h index 5da3d490e80e..eea9bb5990ea 100644 --- a/include/linux/firmware/xlnx-zynqmp.h +++ b/include/linux/firmware/xlnx-zynqmp.h @@ -444,6 +444,9 @@ int zynqmp_pm_request_wake(const u32 node, const bool set_addr, const u64 address, const enum zynqmp_pm_request_ack ack); +int zynqmp_pm_get_rpu_mode(u32 node_id, enum rpu_oper_mode *rpu_mode); +int zynqmp_pm_set_rpu_mode(u32 node_id, u32 arg1); +int zynqmp_pm_set_tcm_config(u32 node_id, u32 arg1); #else static inline int zynqmp_pm_get_api_version(u32 *version) { @@ -674,6 +677,21 @@ static inline int zynqmp_pm_request_wake(const u32 node, { return -ENODEV; } + +static inline int zynqmp_pm_get_rpu_mode(u32 node_id, enum rpu_oper_mode *rpu_mode) +{ + return -ENODEV; +} + +static inline int zynqmp_pm_set_rpu_mode(u32 node_id, u32 arg1) +{ + return -ENODEV; +} + +static inline int zynqmp_pm_set_tcm_config(u32 node_id, u32 arg1) +{ + return -ENODEV; +} #endif #endif /* __FIRMWARE_ZYNQMP_H__ */ From patchwork Tue Nov 23 06:20:50 2021 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Tanmay Shah X-Patchwork-Id: 12633491 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id B8091C433F5 for ; Tue, 23 Nov 2021 06:21:17 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S233839AbhKWGYY (ORCPT ); Tue, 23 Nov 2021 01:24:24 -0500 Received: from mail-sn1anam02on2089.outbound.protection.outlook.com ([40.107.96.89]:32706 "EHLO NAM02-SN1-obe.outbound.protection.outlook.com" rhost-flags-OK-OK-OK-FAIL) by vger.kernel.org with ESMTP id S233774AbhKWGYV (ORCPT ); Tue, 23 Nov 2021 01:24:21 -0500 ARC-Seal: i=1; a=rsa-sha256; s=arcselector9901; d=microsoft.com; cv=none; b=UxLBxas/EQHgaeEUY/jISaZ2B/8OU39CY9YfEg3FPnzjn+1rBCKGc9BX9KPgXe4/QVnSdgsyxZPae/oNfdiQyXCrNESbIes6f28wIq5LA+TZu9cKRAQYCFSczCEcilMeHt/6coMmzv6S52vU8jUh42lOMz9JR/o4dH4zGWm+PZAkdL3tWNNBX7YNjdBZxFZ+Wjce7GZ8efdwRA2/VMHSkQ9wjY66PcMhEg1s8pY7/gb+wzV5sZ2lHyX/ZI+HKkEZGH+BJl9QG2LWdtC3unAgpwmMEVX6yzLu0KTci7EPcxuVpwHImIvQnIDdIut1fnNDX6yW3Tn9beqKNsgLnzYmxw== ARC-Message-Signature: i=1; a=rsa-sha256; c=relaxed/relaxed; d=microsoft.com; s=arcselector9901; h=From:Date:Subject:Message-ID:Content-Type:MIME-Version:X-MS-Exchange-AntiSpam-MessageData-ChunkCount:X-MS-Exchange-AntiSpam-MessageData-0:X-MS-Exchange-AntiSpam-MessageData-1; bh=vnZbYDAT3RYnq7FfdDbDsb8fhk4mDZivVVQMDIuxNDI=; b=L9Sh5RaWoVj7Xv1osY/27ikgJNfSVcK7v96IACMM420ZiVbuSp2tNDJBh9Vg2g6DttDIKJzcwfFYuM9TafEhoAtBXAmXc4fJ6LO8FmElN5/ILRvWGV47c0+Cj9Klvs8lXShl4Offycyf8wtZh2CLDxGv6P1dmio2HZSAxurpqCwVFtzjMdcb98mgeZNjOROP4tSlAcJqeLMlPSfeq7QDq3RhemIWICoSgWzXzidjOTNdM4/2JjfLdfC7rZNYdqVycwtjCDthCeGhqyyojA94U/3XPJ62ao7w6/3iOjRU+qStfIN35T5L0FgkHeVQ6PI+Ee2aAqsgGx5W5jtAUYxUtw== ARC-Authentication-Results: i=1; mx.microsoft.com 1; spf=pass (sender ip is 149.199.62.198) smtp.rcpttodomain=linaro.org smtp.mailfrom=xilinx.com; dmarc=pass (p=none sp=none pct=100) action=none header.from=xilinx.com; dkim=none (message not signed); arc=none DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=xilinx.onmicrosoft.com; s=selector2-xilinx-onmicrosoft-com; h=From:Date:Subject:Message-ID:Content-Type:MIME-Version:X-MS-Exchange-SenderADCheck; bh=vnZbYDAT3RYnq7FfdDbDsb8fhk4mDZivVVQMDIuxNDI=; b=Gk7CzcRchP60rIqSlJ0ohiO0G/AK2obZ1xyfjyIY6N9wV31BA5daIfu5ORRsh8+Z3WG6Ep26BZx7JU8K1tGOmzoyda1/PMlWK3Zi6Uo3zUyv6+OJJ/SEAwOVO7qfUKRZGLR1pX7CVobYJDIDo+yD3ySdKc3cyJtdWhYycGeoVZE= Received: from BN9PR03CA0527.namprd03.prod.outlook.com (2603:10b6:408:131::22) by DM6PR02MB5035.namprd02.prod.outlook.com (2603:10b6:5:52::24) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384) id 15.20.4713.19; Tue, 23 Nov 2021 06:21:07 +0000 Received: from BN1NAM02FT046.eop-nam02.prod.protection.outlook.com (2603:10b6:408:131:cafe::8a) by BN9PR03CA0527.outlook.office365.com (2603:10b6:408:131::22) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384) id 15.20.4713.19 via Frontend Transport; Tue, 23 Nov 2021 06:21:07 +0000 X-MS-Exchange-Authentication-Results: spf=pass (sender IP is 149.199.62.198) smtp.mailfrom=xilinx.com; dkim=none (message not signed) header.d=none;dmarc=pass action=none header.from=xilinx.com; Received-SPF: Pass (protection.outlook.com: domain of xilinx.com designates 149.199.62.198 as permitted sender) receiver=protection.outlook.com; client-ip=149.199.62.198; helo=xsj-pvapexch01.xlnx.xilinx.com; Received: from xsj-pvapexch01.xlnx.xilinx.com (149.199.62.198) by BN1NAM02FT046.mail.protection.outlook.com (10.13.3.181) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256) id 15.20.4713.19 via Frontend Transport; Tue, 23 Nov 2021 06:21:07 +0000 Received: from xsj-pvapexch02.xlnx.xilinx.com (172.19.86.41) by xsj-pvapexch01.xlnx.xilinx.com (172.19.86.40) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256) id 15.1.2176.14; Mon, 22 Nov 2021 22:20:54 -0800 Received: from smtp.xilinx.com (172.19.127.95) by xsj-pvapexch02.xlnx.xilinx.com (172.19.86.41) with Microsoft SMTP Server id 15.1.2176.14 via Frontend Transport; Mon, 22 Nov 2021 22:20:54 -0800 Envelope-to: bjorn.andersson@linaro.org, mathieu.poirier@linaro.org, robh+dt@kernel.org, laurent.pinchart@ideasonboard.com, bill.mills@linaro.org, linux-remoteproc@vger.kernel.org, linux-kernel@vger.kernel.org, devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org Received: from [172.19.3.14] (port=33042 helo=xsjtanmays50.xilinx.com) by smtp.xilinx.com with esmtp (Exim 4.90) (envelope-from ) id 1mpPAk-0001Zw-5l; Mon, 22 Nov 2021 22:20:54 -0800 From: Tanmay Shah To: Bjorn Andersson , Mathieu Poirier , Rob Herring , Michal Simek CC: Laurent Pinchart , Ben Levinsky , Bill Mills , Sergei Korneichuk , Tanmay Shah , , , , Subject: [PATCH v2 6/6] drivers: remoteproc: Add Xilinx r5 remoteproc driver Date: Mon, 22 Nov 2021 22:20:50 -0800 Message-ID: <20211123062050.1442712-7-tanmay.shah@xilinx.com> X-Mailer: git-send-email 2.25.1 In-Reply-To: <20211123062050.1442712-1-tanmay.shah@xilinx.com> References: <20211123062050.1442712-1-tanmay.shah@xilinx.com> MIME-Version: 1.0 X-EOPAttributedMessage: 0 X-MS-PublicTrafficType: Email X-MS-Office365-Filtering-Correlation-Id: bdfc465f-4fa5-4785-0337-08d9ae496f84 X-MS-TrafficTypeDiagnostic: DM6PR02MB5035: X-Microsoft-Antispam-PRVS: X-Auto-Response-Suppress: DR, RN, NRN, OOF, AutoReply X-MS-Oob-TLC-OOBClassifiers: OLM:551; X-MS-Exchange-SenderADCheck: 1 X-MS-Exchange-AntiSpam-Relay: 0 X-Microsoft-Antispam: BCL:0; X-Microsoft-Antispam-Message-Info: 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 X-Forefront-Antispam-Report: CIP:149.199.62.198;CTRY:US;LANG:en;SCL:1;SRV:;IPV:NLI;SFV:NSPM;H:xsj-pvapexch01.xlnx.xilinx.com;PTR:unknown-62-198.xilinx.com;CAT:NONE;SFS:(36840700001)(46966006)(54906003)(30864003)(316002)(110136005)(36906005)(426003)(508600001)(1076003)(336012)(82310400004)(70586007)(7636003)(26005)(9786002)(2906002)(8676002)(2616005)(356005)(70206006)(36860700001)(6666004)(8936002)(7696005)(5660300002)(47076005)(186003)(6636002)(36756003)(44832011)(4326008)(83380400001)(102446001);DIR:OUT;SFP:1101; X-OriginatorOrg: xilinx.com X-MS-Exchange-CrossTenant-OriginalArrivalTime: 23 Nov 2021 06:21:07.4904 (UTC) X-MS-Exchange-CrossTenant-Network-Message-Id: bdfc465f-4fa5-4785-0337-08d9ae496f84 X-MS-Exchange-CrossTenant-Id: 657af505-d5df-48d0-8300-c31994686c5c X-MS-Exchange-CrossTenant-OriginalAttributedTenantConnectingIp: TenantId=657af505-d5df-48d0-8300-c31994686c5c;Ip=[149.199.62.198];Helo=[xsj-pvapexch01.xlnx.xilinx.com] X-MS-Exchange-CrossTenant-AuthSource: BN1NAM02FT046.eop-nam02.prod.protection.outlook.com X-MS-Exchange-CrossTenant-AuthAs: Anonymous X-MS-Exchange-CrossTenant-FromEntityHeader: HybridOnPrem X-MS-Exchange-Transport-CrossTenantHeadersStamped: DM6PR02MB5035 Precedence: bulk List-ID: X-Mailing-List: linux-remoteproc@vger.kernel.org This driver enables r5f dual core Real time Processing Unit subsystem available on Xilinx Zynq Ultrascale MPSoC Platform. RPU subsystem (cluster) can be configured in different modes e.g. split mode in which two r5f cores work independent of each other and lock-step mode in which both r5f cores execute same code clock-for-clock and notify if the result is different. The Xilinx r5 Remoteproc Driver boots the RPU cores via calls to the Xilinx Platform Management Unit that handles the R5 configuration, memory access and R5 lifecycle management. The interface to this manager is done in this driver via zynqmp_pm_* function calls. Signed-off-by: Ben Levinsky Signed-off-by: Tanmay Shah --- drivers/remoteproc/Kconfig | 12 + drivers/remoteproc/Makefile | 1 + drivers/remoteproc/xlnx_r5_remoteproc.c | 959 ++++++++++++++++++++++++ 3 files changed, 972 insertions(+) create mode 100644 drivers/remoteproc/xlnx_r5_remoteproc.c diff --git a/drivers/remoteproc/Kconfig b/drivers/remoteproc/Kconfig index f30d00a3aabe..27f66910d8d3 100644 --- a/drivers/remoteproc/Kconfig +++ b/drivers/remoteproc/Kconfig @@ -315,6 +315,18 @@ config TI_K3_R5_REMOTEPROC It's safe to say N here if you're not interested in utilizing a slave processor. +config XLNX_R5_REMOTEPROC + tristate "Xilinx R5 remoteproc support" + depends on PM && ARCH_ZYNQMP + depends on ZYNQMP_FIRMWARE + select RPMSG_VIRTIO + select ZYNQMP_IPI_MBOX + help + Say y or m here to support Xilinx R5 remote processors via the remote + processor framework. + + It's safe to say N if not interested in using RPU r5f cores. + endif # REMOTEPROC endmenu diff --git a/drivers/remoteproc/Makefile b/drivers/remoteproc/Makefile index bb26c9e4ef9c..334a8bed4c14 100644 --- a/drivers/remoteproc/Makefile +++ b/drivers/remoteproc/Makefile @@ -35,3 +35,4 @@ obj-$(CONFIG_ST_SLIM_REMOTEPROC) += st_slim_rproc.o obj-$(CONFIG_STM32_RPROC) += stm32_rproc.o obj-$(CONFIG_TI_K3_DSP_REMOTEPROC) += ti_k3_dsp_remoteproc.o obj-$(CONFIG_TI_K3_R5_REMOTEPROC) += ti_k3_r5_remoteproc.o +obj-$(CONFIG_XLNX_R5_REMOTEPROC) += xlnx_r5_remoteproc.o diff --git a/drivers/remoteproc/xlnx_r5_remoteproc.c b/drivers/remoteproc/xlnx_r5_remoteproc.c new file mode 100644 index 000000000000..c2167fd3869d --- /dev/null +++ b/drivers/remoteproc/xlnx_r5_remoteproc.c @@ -0,0 +1,959 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * ZynqMP R5 Remote Processor driver + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "remoteproc_internal.h" + +/* settings for RPU cluster mode */ +enum zynqmp_r5_cluster_mode { + SPLIT_MODE = 0, // RPU cluster mode when cores run as separate processor + LOCKSTEP_MODE = 1, // cores execute same code in lockstep,clk-for-clk + SINGLE_CPU_MODE = 2, // core0 is held in reset and only core1 runs +}; + +/** + * struct mem_bank_data - Memory Bank description + * + * @addr: Start address of memory bank + * @size: Size of Memory bank + * @pm_domain_id: Power-domains id of memory bank for firmware to turn on/off + * @bank_name: name of the bank for remoteproc framework + */ +struct mem_bank_data { + phys_addr_t addr; + size_t size; + enum pm_node_id pm_domain_id; + char *bank_name; +}; + +static const struct mem_bank_data zynqmp_tcm_banks[] = { + {0xffe00000UL, 0x10000UL, PD_R5_0_ATCM, "atcm0"}, /* TCM 64KB each */ + {0xffe20000UL, 0x10000UL, PD_R5_0_BTCM, "btcm0"}, + {0xffe90000UL, 0x10000UL, PD_R5_1_ATCM, "atcm1"}, + {0xffeb0000UL, 0x10000UL, PD_R5_1_BTCM, "btcm1"}, +}; + +/** + * struct zynqmp_r5_core - ZynqMP R5 core structure + * + * @dev: device of RPU instance + * @np: device node of RPU instance + * @tcm_bank_count: number TCM banks accessible to this RPU + * @tcm_banks: array of each TCM bank data + * @res_mem_count: number of Reserved Memory regions per core + * @res_mem: array of reserved memory regions + * @rproc: rproc handle + * @pm_domain_id: RPU CPU power domain id + */ +struct zynqmp_r5_core { + struct device *dev; + struct device_node *np; + int tcm_bank_count; + struct mem_bank_data *tcm_banks; + int res_mem_count; + struct reserved_mem *res_mem; + struct rproc *rproc; + enum pm_node_id pm_domain_id; +}; + +/** + * struct zynqmp_r5_cluster - ZynqMP R5 cluster structure + * + * @dev: r5f subsystem cluster device node + * @mode: cluster mode of type zynqmp_r5_cluster_mode + * @core_count: number of r5 cores used for this cluster mode + * @r5_cores: Array of r5 cores of type struct zynqmp_r5_core + */ +struct zynqmp_r5_cluster { + struct device *dev; + enum zynqmp_r5_cluster_mode mode; + int core_count; + struct zynqmp_r5_core *r5_cores; +}; + +/* + * zynqmp_r5_set_mode - set RPU operation mode + * + * set RPU operation mode + * + * Return: 0 for success, negative value for failure + */ +static int zynqmp_r5_set_mode(struct zynqmp_r5_core *r5_core, + enum zynqmp_r5_cluster_mode rpu_mode) +{ + enum rpu_tcm_comb tcm_mode; + int ret, reg_val; + + reg_val = (rpu_mode == LOCKSTEP_MODE ? 0 : 1); + + ret = zynqmp_pm_set_rpu_mode(r5_core->pm_domain_id, reg_val); + if (ret < 0) { + pr_err("failed to set RPU mode\n"); + return ret; + } + + tcm_mode = (rpu_mode == LOCKSTEP_MODE) ? + PM_RPU_TCM_COMB : PM_RPU_TCM_SPLIT; + ret = zynqmp_pm_set_tcm_config(r5_core->pm_domain_id, tcm_mode); + if (ret < 0) + pr_err("failed to configure TCM\n"); + + return ret; +} + +/* + * zynqmp_r5_rproc_start + * @rproc: single R5 core's corresponding rproc instance + * + * Start R5 Core from designated boot address. + * + * return 0 on success, otherwise non-zero value on failure + */ +static int zynqmp_r5_rproc_start(struct rproc *rproc) +{ + struct zynqmp_r5_core *r5_core = rproc->priv; + enum rpu_boot_mem bootmem; + int ret; + + if (!r5_core) { + pr_err("can't get r5 core\n"); + return -EINVAL; + } + + bootmem = (rproc->bootaddr >= 0xFFFC0000) ? + PM_RPU_BOOTMEM_HIVEC : PM_RPU_BOOTMEM_LOVEC; + + dev_dbg(r5_core->dev, "RPU boot addr 0x%llx from %s.", rproc->bootaddr, + bootmem == PM_RPU_BOOTMEM_HIVEC ? "OCM" : "TCM"); + + ret = zynqmp_pm_request_wake(r5_core->pm_domain_id, 1, + bootmem, ZYNQMP_PM_REQUEST_ACK_NO); + if (ret) + pr_err("failed to start RPU = %d\n", r5_core->pm_domain_id); + return ret; +} + +/* + * zynqmp_r5_rproc_stop + * @rproc: single R5 core's corresponding rproc instance + * + * Power down R5 Core. + * + * return 0 on success, otherwise non-zero value on failure + */ +static int zynqmp_r5_rproc_stop(struct rproc *rproc) +{ + struct zynqmp_r5_core *r5_core = rproc->priv; + int ret; + + ret = zynqmp_pm_force_pwrdwn(r5_core->pm_domain_id, + ZYNQMP_PM_REQUEST_ACK_BLOCKING); + if (ret) + pr_err("failed to stop remoteproc RPU %d\n", ret); + + return ret; +} + +/* + * zynqmp_r5_rproc_mem_map + * @rproc: single R5 core's corresponding rproc instance + * @mem: mem entry to map + * + * Callback to map va for memory-region's carveout. + * + * return 0 on success, otherwise non-zero value on failure + */ +static int zynqmp_r5_rproc_mem_map(struct rproc *rproc, + struct rproc_mem_entry *mem) +{ + void __iomem *va; + + va = ioremap_wc(mem->dma, mem->len); + if (IS_ERR_OR_NULL(va)) + return -ENOMEM; + + mem->va = (void *)va; + + return 0; +} + +/* + * zynqmp_r5_rproc_mem_unmap + * @rproc: single R5 core's corresponding rproc instance + * @mem: mem entry to unmap + * + * Unmap memory-region carveout + * + * return 0 on success, otherwise non-zero value on failure + */ +static int zynqmp_r5_rproc_mem_unmap(struct rproc *rproc, + struct rproc_mem_entry *mem) +{ + iounmap((void __iomem *)mem->va); + return 0; +} + +/* + * add_mem_regions + * @rproc: single R5 core's corresponding rproc instance + * + * Construct rproc mem carveouts from carveout provided in + * memory-region property + * + * return 0 on success, otherwise non-zero value on failure + */ +static int add_mem_regions(struct rproc *rproc) +{ + struct device *dev; + struct rproc_mem_entry *mem; + struct reserved_mem *rmem; + struct zynqmp_r5_core *r5_core; + int i; + + r5_core = rproc->priv; + dev = r5_core->dev; + + /* Register associated reserved memory regions */ + for (i = 0; i < r5_core->res_mem_count; i++) { + rmem = &r5_core->res_mem[i]; + mem = rproc_mem_entry_init(dev, NULL, + (dma_addr_t)rmem->base, + rmem->size, rmem->base, + zynqmp_r5_rproc_mem_map, + zynqmp_r5_rproc_mem_unmap, + rmem->name); + if (IS_ERR_OR_NULL(mem)) + return -ENOMEM; + + rproc_add_carveout(rproc, mem); + } + + return 0; +} + +/* + * zynqmp_r5_rproc_mem_unmap + * @rproc: single R5 core's corresponding rproc instance + * @mem: mem entry to unmap + * + * Unmap TCM banks when powering down R5 core. + * + * return 0 on success, otherwise non-zero value on failure + */ +static int tcm_mem_unmap(struct rproc *rproc, struct rproc_mem_entry *mem) +{ + struct zynqmp_r5_core *r5_core; + int i; + enum pm_node_id pm_domain_id; + + r5_core = rproc->priv; + if (!r5_core) { + pr_err("r5 core is not available\n"); + return -EINVAL; + } + + iounmap((void __iomem *)mem->va); + + for (i = 0; i < r5_core->tcm_bank_count; i++) { + pm_domain_id = r5_core->tcm_banks[i].pm_domain_id; + if (zynqmp_pm_release_node(pm_domain_id)) + pr_warn("can't turn off TCM bank %d", pm_domain_id); + } + + return 0; +} + +/* + * tcm_mem_map + * @rproc: single R5 core's corresponding rproc instance + * @mem: mem entry to initialize the va and da fields of + * + * Given TCM bank entry, this callback will set device address for R5 + * running on TCM and also setup virtual address for TCM bank + * remoteproc carveout. + * + * return 0 on success, otherwise non-zero value on failure + */ +static int tcm_mem_map(struct rproc *rproc, + struct rproc_mem_entry *mem) +{ + void __iomem *va; + + va = ioremap_wc(mem->dma, mem->len); + if (IS_ERR_OR_NULL(va)) + return -ENOMEM; + + /* Update memory entry va */ + mem->va = (void *)va; + + /* clear TCMs */ + memset_io(va, 0, mem->len); + + /* + * The R5s expect their TCM banks to be at address 0x0 and 0x2000, + * while on the Linux side they are at 0xffexxxxx. + * + * Zero out the high 12 bits of the address. This will give + * expected values for TCM Banks 0A and 0B (0x0 and 0x20000). + */ + mem->da &= 0x000fffff; + + /* + * TCM Banks 1A and 1B still have to be translated. + * + * Below handle these two banks' absolute addresses (0xffe90000 and + * 0xffeb0000) and convert to the expected relative addresses + * (0x0 and 0x20000). + */ + if (mem->da == 0x90000 || mem->da == 0xB0000) + mem->da -= 0x90000; + + /* if translated TCM bank address is not valid report error */ + if (mem->da != 0x0 && mem->da != 0x20000) { + dev_err(&rproc->dev, "invalid TCM address: %x\n", mem->da); + return -EINVAL; + } + return 0; +} + +static int add_tcm_carveout_split_mode(struct rproc *rproc) +{ + int i, num_banks, ret; + struct rproc_mem_entry *mem; + enum pm_node_id pm_domain_id; + u32 bank_addr; + size_t bank_size = 0; + char *bank_name; + struct device *dev; + struct zynqmp_r5_core *r5_core; + + r5_core = (struct zynqmp_r5_core *)rproc->priv; + if (!r5_core) + return -EINVAL; + + dev = r5_core->dev; + + /* go through zynqmp banks for r5 node */ + num_banks = r5_core->tcm_bank_count; + if (num_banks <= 0) { + dev_err(dev, "need to specify TCM banks\n"); + return -EINVAL; + } + + for (i = 0; i < num_banks; i++) { + bank_addr = (u32)r5_core->tcm_banks[i].addr; + bank_name = r5_core->tcm_banks[i].bank_name; + bank_size = r5_core->tcm_banks[i].size; + pm_domain_id = r5_core->tcm_banks[i].pm_domain_id; + + ret = zynqmp_pm_request_node(pm_domain_id, + ZYNQMP_PM_CAPABILITY_ACCESS, 0, + ZYNQMP_PM_REQUEST_ACK_BLOCKING); + if (ret < 0) { + dev_err(dev, "failed to turn on TCM %d", pm_domain_id); + return ret; + } + + dev_dbg(dev, "TCM carveout split mode %s addr=%x, size=0x%lx", + bank_name, bank_addr, bank_size); + + /* add carveout */ + mem = rproc_mem_entry_init(dev, NULL, bank_addr, + bank_size, bank_addr, + tcm_mem_map, tcm_mem_unmap, + bank_name); + if (IS_ERR_OR_NULL(mem)) { + /* Turn off all TCM banks turned on before */ + do { + pm_domain_id = r5_core->tcm_banks[i].pm_domain_id; + ret = zynqmp_pm_release_node((u32)pm_domain_id); + if (ret) + dev_warn(dev, + "fail to release node: %x, %x\n", + (u32)pm_domain_id, ret); + } while (i--); + return -ENOMEM; + } + + rproc_add_carveout(rproc, mem); + } + + return 0; +} + +static int add_tcm_carveout_lockstep_mode(struct rproc *rproc) +{ + int i, num_banks, ret; + struct rproc_mem_entry *mem; + enum pm_node_id pm_domain_id; + u32 bank_addr; + size_t bank_size = 0; + char *bank_name; + struct device *dev; + struct platform_device *parent_pdev; + struct zynqmp_r5_cluster *cluster; + struct zynqmp_r5_core *r5_core; + + r5_core = (struct zynqmp_r5_core *)rproc->priv; + if (!r5_core) + return -EINVAL; + + dev = r5_core->dev; + if (!dev) { + pr_err("r5 core device unavailable\n"); + return -ENODEV; + } + + /* go through zynqmp banks for r5 node */ + num_banks = r5_core->tcm_bank_count; + if (num_banks <= 0) { + dev_err(dev, "need to specify TCM banks\n"); + return -EINVAL; + } + + bank_addr = (u32)r5_core->tcm_banks[0].addr; + bank_name = r5_core->tcm_banks[0].bank_name; + for (i = 0; i < num_banks; i++) { + bank_size += r5_core->tcm_banks[i].size; + pm_domain_id = r5_core->tcm_banks[i].pm_domain_id; + + ret = zynqmp_pm_request_node(pm_domain_id, + ZYNQMP_PM_CAPABILITY_ACCESS, 0, + ZYNQMP_PM_REQUEST_ACK_BLOCKING); + if (ret < 0) { + dev_err(dev, "failed to turn on TCM %d", pm_domain_id); + return ret; + } + } + + dev_dbg(dev, "TCM add carveout lockstep mode %s addr=0x%x, size=0x%lx", + bank_name, bank_addr, bank_size); + + /* add carveout */ + mem = rproc_mem_entry_init(dev, NULL, bank_addr, + bank_size, bank_addr, + tcm_mem_map, tcm_mem_unmap, + bank_name); + if (IS_ERR_OR_NULL(mem)) { + for (i = 0; i < num_banks; i++) { + pm_domain_id = r5_core->tcm_banks[i].pm_domain_id; + ret = zynqmp_pm_release_node((u32)pm_domain_id); + if (ret) + dev_warn(dev, + "fail to release node: %x ret: %x\n", + (u32)pm_domain_id, ret); + } + return -ENOMEM; + } + + rproc_add_carveout(rproc, mem); + + return 0; +} + +/* + * add_tcm_banks() + * @rproc: single R5 core's corresponding rproc instance + * + * Given R5 node in remoteproc instance + * allocate remoteproc carveout for TCM memory + * needed for firmware to be loaded + * + * return 0 on success, otherwise non-zero value on failure + */ +static int add_tcm_banks(struct rproc *rproc) +{ + struct device *dev; + struct platform_device *parent_pdev; + struct zynqmp_r5_cluster *cluster; + struct zynqmp_r5_core *r5_core; + + r5_core = (struct zynqmp_r5_core *)rproc->priv; + if (!r5_core) + return -EINVAL; + + dev = r5_core->dev; + if (!dev) { + pr_err("r5 core device unavailable\n"); + return -ENODEV; + } + + parent_pdev = to_platform_device(dev->parent); + if (!parent_pdev) { + dev_err(dev, "parent platform dev unavailable\n"); + return -ENODEV; + } + + cluster = platform_get_drvdata(parent_pdev); + if (!cluster) { + dev_err(&parent_pdev->dev, "Invalid driver data\n"); + return -EINVAL; + } + + if (cluster->mode == SPLIT_MODE) + return add_tcm_carveout_split_mode(rproc); + else if (cluster->mode == LOCKSTEP_MODE) + return add_tcm_carveout_lockstep_mode(rproc); + + dev_err(cluster->dev, "invalid cluster mode\n"); + return -EINVAL; +} + +/* + * zynqmp_r5_parse_fw() + * @rproc: single R5 core's corresponding rproc instance + * @fw: ptr to firmware to be loaded onto r5 core + * + * When loading firmware, ensure the necessary carveouts are in remoteproc + * + * return 0 on success, otherwise non-zero value on failure + */ +static int zynqmp_r5_parse_fw(struct rproc *rproc, const struct firmware *fw) +{ + int ret; + struct zynqmp_r5_core *r5_core; + struct device *dev; + + r5_core = rproc->priv; + if (!r5_core) { + dev_err(&rproc->dev, "r5 core not available\n"); + return -EINVAL; + } + + dev = r5_core->dev; + + ret = add_tcm_banks(rproc); + if (ret) { + dev_err(dev, "failed to get TCM banks, err %d\n", ret); + return ret; + } + + ret = add_mem_regions(rproc); + if (ret) + dev_warn(dev, "failed to get reserve mem regions %d\n", ret); + + ret = rproc_elf_load_rsc_table(rproc, fw); + if (ret == -EINVAL) { + /* + * resource table only required for IPC. + * if not present, this is not necessarily an error; + * for example, loading r5 hello world application + * so simply inform user and keep going. + */ + dev_info(&rproc->dev, "no resource table found.\n"); + ret = 0; + } + return ret; +} + +static struct rproc_ops zynqmp_r5_rproc_ops = { + .start = zynqmp_r5_rproc_start, + .stop = zynqmp_r5_rproc_stop, + .load = rproc_elf_load_segments, + .parse_fw = zynqmp_r5_parse_fw, + .find_loaded_rsc_table = rproc_elf_find_loaded_rsc_table, + .sanity_check = rproc_elf_sanity_check, + .get_boot_addr = rproc_elf_get_boot_addr, +}; + +static void zynqmp_r5_print_dt_node_info(struct zynqmp_r5_cluster *cluster) +{ + int i, j, k; + struct zynqmp_r5_core *r5_core; + + dev_dbg(cluster->dev, "Printing dt node info\n"); + + pr_debug("cluster mode = %d\n", cluster->mode); + pr_debug("r5f cluster in %s mode\n", (cluster->mode == 0) ? "SPLIT" : + cluster->mode == 1 ? "LOCKSTEP" : "SINGLE_CPU"); + pr_debug("r5f num cores = %d\n", cluster->core_count); + + for (i = 0; i < cluster->core_count; i++) { + r5_core = &cluster->r5_cores[i]; + if (!r5_core) { + pr_err("can't get r5_core\n"); + continue; + } + + pr_debug("r5 core %d nodes\n", i); + pr_debug("TCM banks = %d\n", r5_core->tcm_bank_count); + for (k = 0; k < r5_core->tcm_bank_count; k++) { + pr_debug("tcm %d addr=0x%llx size=0x%lx, pm_id=%d, %s\n", + k, r5_core->tcm_banks[k].addr, + r5_core->tcm_banks[k].size, + r5_core->tcm_banks[k].pm_domain_id, + r5_core->tcm_banks[k].bank_name); + } + + pr_debug("reserve mem regions = %d\n", r5_core->res_mem_count); + + for (j = 0; j < r5_core->res_mem_count; j++) { + pr_debug("mem %d addr=0x%llx, size=0x%llx, name=%s\n", + j, r5_core->res_mem[j].base, + r5_core->res_mem[j].size, + r5_core->res_mem[j].name); + } + } +} + +/** + * zynqmp_r5_add_rproc_core() - Probes ZynqMP R5 processor device node + * this is called for each individual R5 core to + * set up mailbox, Xilinx platform manager unique ID, + * add to rproc core + * + * @r5_core: zynqmp_r5_core r5 core object to initialize + * + * Return: 0 for success, negative value for failure. + */ +static int zynqmp_r5_add_rproc_core(struct zynqmp_r5_core *r5_core) +{ + int ret; + struct rproc *r5_rproc; + struct device *dev; + + dev = r5_core->dev; + + /* Set up DMA mask */ + ret = dma_set_coherent_mask(dev, DMA_BIT_MASK(32)); + if (ret) + return ret; + + /* Allocate remoteproc instance */ + r5_rproc = devm_rproc_alloc(dev, dev_name(dev), &zynqmp_r5_rproc_ops, + NULL, sizeof(struct zynqmp_r5_core)); + if (IS_ERR_OR_NULL(r5_rproc)) + return -ENOMEM; + + r5_rproc->auto_boot = false; + r5_rproc->priv = r5_core; + + /* Add R5 remoteproc */ + ret = devm_rproc_add(dev, r5_rproc); + if (ret) { + pr_err("failed to add r5 remoteproc\n"); + return ret; + } + + return 0; +} + +static int zynqmp_r5_get_tcm_node(struct zynqmp_r5_cluster *cluster) +{ + int tcm_bank_count, tcm_node; + int i = 0, j; + struct zynqmp_r5_core *r5_core; + const struct mem_bank_data *tcm = zynqmp_tcm_banks; + struct device *dev = cluster->dev; + + /* ToDo: Use predefined TCM address space values from driver until + * system-dt spec is not final fot TCM + */ + tcm_bank_count = ARRAY_SIZE(zynqmp_tcm_banks); + + /* count per core tcm banks */ + tcm_bank_count = tcm_bank_count / cluster->core_count; + + /* r5 core 0 will use all of TCM banks in lockstep mode. + * In split mode, r5 core0 will use 128k and r5 core1 will use another + * 128k. Assign TCM banks to each core accordingly + */ + tcm_node = 0; + for (j = 0; j < cluster->core_count; j++) { + r5_core = &cluster->r5_cores[j]; + r5_core->tcm_banks = devm_kzalloc(dev, sizeof(struct mem_bank_data) * + tcm_bank_count, GFP_KERNEL); + if (IS_ERR_OR_NULL(r5_core->tcm_banks)) + return -ENOMEM; + + for (i = 0; i < tcm_bank_count; i++) { + /* Use pre-defined TCM reg values. + * Eventually this should be replaced by values + * parsed from dts. + */ + r5_core->tcm_banks[i].addr = tcm[tcm_node].addr; + r5_core->tcm_banks[i].size = tcm[tcm_node].size; + r5_core->tcm_banks[i].pm_domain_id = tcm[tcm_node].pm_domain_id; + r5_core->tcm_banks[i].bank_name = tcm[tcm_node].bank_name; + tcm_node++; + } + + r5_core->tcm_bank_count = tcm_bank_count; + } + + return 0; +} + +static int zynqmp_r5_get_mem_region_node(struct zynqmp_r5_core *r5_core) +{ + int res_mem_count, i; + struct device *dev; + struct device_node *np, *rmem_np; + struct reserved_mem *rmem; + + dev = r5_core->dev; + + np = r5_core->np; + if (IS_ERR_OR_NULL(np)) { + pr_err("invalid device node of r5 core\n"); + return -EINVAL; + } + + res_mem_count = of_property_count_elems_of_size(np, "memory-region", + sizeof(phandle)); + if (res_mem_count <= 0) { + dev_warn(dev, "failed to get memory-region property %d\n", + res_mem_count); + return -EINVAL; + } + + r5_core->res_mem = devm_kzalloc(dev, + res_mem_count * sizeof(struct reserved_mem), + GFP_KERNEL); + if (!r5_core->res_mem) { + dev_err(dev, "failed to allocate mem region memory\n"); + return -ENOMEM; + } + + for (i = 0; i < res_mem_count; i++) { + rmem_np = of_parse_phandle(np, "memory-region", i); + if (!rmem_np) + return -EINVAL; + + rmem = of_reserved_mem_lookup(rmem_np); + if (!rmem) { + of_node_put(rmem_np); + return -EINVAL; + } + + memcpy(&r5_core->res_mem[i], rmem, + sizeof(struct reserved_mem)); + of_node_put(rmem_np); + } + + r5_core->res_mem_count = res_mem_count; + + return 0; +} + +static int zynqmp_r5_core_init(struct zynqmp_r5_cluster *cluster) +{ + int ret, i; + struct zynqmp_r5_core *r5_core; + struct device *dev = cluster->dev; + + ret = zynqmp_r5_get_tcm_node(cluster); + if (ret < 0) { + dev_err(dev, "can't get tcm node, err %d\n", ret); + return ret; + } + + for (i = 0; i < cluster->core_count; i++) { + r5_core = &cluster->r5_cores[i]; + if (!r5_core) { + pr_err("invalid r5 core\n"); + return -EINVAL; + } + + ret = zynqmp_r5_get_mem_region_node(r5_core); + if (ret) + dev_warn(dev, "memory-region prop failed %d\n", ret); + + ret = of_property_read_u32_index(r5_core->np, "power-domains", + 1, &r5_core->pm_domain_id); + if (ret) { + dev_err(dev, "failed to get power-domains property\n"); + return ret; + } + + ret = zynqmp_r5_set_mode(r5_core, cluster->mode); + if (ret) + return ret; + + ret = zynqmp_r5_add_rproc_core(r5_core); + if (ret) { + dev_err(dev, "failed to init r5 core %d\n", i); + return ret; + } + } + + return 0; +} + +static int zynqmp_r5_cluster_init(struct zynqmp_r5_cluster *cluster) +{ + struct device *dev = cluster->dev; + struct device_node *dev_node = dev_of_node(dev); + struct device_node *child; + struct platform_device *child_pdev; + int core_count = 0, ret, i; + enum zynqmp_r5_cluster_mode cluster_mode = LOCKSTEP_MODE; + struct zynqmp_r5_core *r5_cores; + + ret = of_property_read_u32(dev_node, "xlnx,cluster-mode", &cluster_mode); + + /* on success returns 0, if not defined then returns -EINVAL, + * In that case, default is LOCKSTEP mode + */ + if (ret != -EINVAL && ret != 0) { + dev_err(dev, "Invalid xlnx,cluster-mode property\n"); + return -EINVAL; + } + + if (cluster_mode == SINGLE_CPU_MODE) { + dev_err(dev, "driver does not support single cpu mode\n"); + return -EINVAL; + } else if ((cluster_mode != SPLIT_MODE && + cluster_mode != LOCKSTEP_MODE)) { + dev_err(dev, "Invalid cluster mode\n"); + return -EINVAL; + } + + core_count = of_get_available_child_count(dev_node); + if (core_count <= 0) { + dev_err(dev, "Invalid number of r5 cores %d", core_count); + return -EINVAL; + } else if (cluster_mode == SPLIT_MODE && core_count != 2) { + dev_err(dev, "Invalid number of r5 cores for split mode\n"); + return -EINVAL; + } else if (cluster_mode == LOCKSTEP_MODE && core_count == 2) { + dev_warn(dev, "Only r5 core0 will be used\n"); + core_count = 1; + } + + r5_cores = devm_kzalloc(dev, sizeof(struct zynqmp_r5_core) * + core_count, GFP_KERNEL); + if (IS_ERR_OR_NULL(r5_cores)) { + dev_err(dev, "can't allocate memory for cores\n"); + return -ENOMEM; + } + + i = 0; + for_each_available_child_of_node(dev_node, child) { + child_pdev = of_find_device_by_node(child); + if (!child_pdev) + return -ENODEV; + + r5_cores[i].dev = &child_pdev->dev; + if (!r5_cores[i].dev) { + pr_err("can't get device for r5 core %d\n", i); + return -ENODEV; + } + + r5_cores[i].np = dev_of_node(r5_cores[i].dev); + if (!r5_cores[i].np) { + pr_err("can't get device node for r5 core %d\n", i); + return -ENODEV; + } + + i++; + if (i == core_count) + break; + } + + cluster->mode = cluster_mode; + cluster->core_count = core_count; + cluster->r5_cores = r5_cores; + + ret = zynqmp_r5_core_init(cluster); + if (ret < 0) { + dev_err(dev, "failed to init r5 core err %d\n", ret); + return ret; + } + + zynqmp_r5_print_dt_node_info(cluster); + + return 0; +} + +static void zynqmp_r5_cluster_exit(void *data) +{ + struct platform_device *pdev = (struct platform_device *)data; + + platform_set_drvdata(pdev, NULL); + + pr_info("Exit r5f subsystem driver\n"); +} + +/* + * zynqmp_r5_remoteproc_probe() + * + * @pdev: domain platform device for R5 cluster + * + * called when driver is probed, for each R5 core specified in DT, + * setup as needed to do remoteproc-related operations + * + * Return: 0 for success, negative value for failure. + */ +static int zynqmp_r5_remoteproc_probe(struct platform_device *pdev) +{ + int ret; + struct zynqmp_r5_cluster *cluster; + struct device *dev = &pdev->dev; + + cluster = devm_kzalloc(dev, sizeof(*cluster), GFP_KERNEL); + if (IS_ERR_OR_NULL(cluster)) + return -ENOMEM; + + cluster->dev = dev; + + ret = devm_of_platform_populate(dev); + if (ret) { + dev_err(dev, "failed to populate platform dev %d\n", ret); + return ret; + } + + /* wire in so each core can be cleaned up at driver remove */ + platform_set_drvdata(pdev, cluster); + + ret = devm_add_action_or_reset(dev, zynqmp_r5_cluster_exit, pdev); + if (ret) + return ret; + + ret = zynqmp_r5_cluster_init(cluster); + if (ret) { + dev_err(dev, "Invalid r5f subsystem device tree\n"); + return ret; + } + + dev_info(dev, "Xilinx r5f remoteproc driver probe success\n"); + return 0; +} + +/* Match table for OF platform binding */ +static const struct of_device_id zynqmp_r5_remoteproc_match[] = { + { .compatible = "xlnx,zynqmp-r5fss", }, + { /* end of list */ }, +}; +MODULE_DEVICE_TABLE(of, zynqmp_r5_remoteproc_match); + +static struct platform_driver zynqmp_r5_remoteproc_driver = { + .probe = zynqmp_r5_remoteproc_probe, + .driver = { + .name = "zynqmp_r5_remoteproc", + .of_match_table = zynqmp_r5_remoteproc_match, + }, +}; +module_platform_driver(zynqmp_r5_remoteproc_driver); + +MODULE_DESCRIPTION("Xilinx R5F remote processor driver"); +MODULE_AUTHOR("Xilinx Inc."); +MODULE_LICENSE("GPL v2");