From patchwork Fri Apr 15 15:21:31 2022 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Paul Kocialkowski X-Patchwork-Id: 12815005 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id 9D1EDC433FE for ; Fri, 15 Apr 2022 15:22:00 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1354965AbiDOPY0 (ORCPT ); Fri, 15 Apr 2022 11:24:26 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:51680 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S240830AbiDOPYZ (ORCPT ); Fri, 15 Apr 2022 11:24:25 -0400 Received: from relay1-d.mail.gandi.net (relay1-d.mail.gandi.net [IPv6:2001:4b98:dc4:8::221]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 586D05F4E2; Fri, 15 Apr 2022 08:21:56 -0700 (PDT) Received: (Authenticated sender: paul.kocialkowski@bootlin.com) by mail.gandi.net (Postfix) with ESMTPSA id 07D7A240007; Fri, 15 Apr 2022 15:21:52 +0000 (UTC) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=bootlin.com; s=gm1; t=1650036114; h=from:from:reply-to:subject:subject:date:date:message-id:message-id: to:to:cc:cc:mime-version:mime-version: content-transfer-encoding:content-transfer-encoding: in-reply-to:in-reply-to:references:references; bh=VsUxuduSUSmT5cVDhch3xSuWAwRsl9IrVPZo+IvctwA=; b=jeJ9wnGKPLZD9sEkT//XK2wPy5CnxYAhOtEEf/QB1cVtYyhQmB809YT54bF+h77Luy9+0L WCySsqrjMw0pzXl2KgwEgb9pVhSPZdn1bnBMjjOMIukqnyeZImUT+eLT0kdj0pUMovvwTX JEzvhXGPhgzgx5TqVGHHazRFtEHQNU84xc0BAH8Wnr/SrcdmuthgqNYR60P3hT16U9sVrG WGZjBPqsJPRNfjp8ui/BF3k3AVizbfjKG1j1ZBywxDN8ml56eRunvbimffVEBPSnsr6HEp 8ux5jaxaFIMNTiQVvUV5HthUiibQBkxi21m0BmfDk5D+KnMHc/NmQOxqYnV7Ag== From: Paul Kocialkowski To: linux-media@vger.kernel.org, devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-sunxi@lists.linux.dev, linux-kernel@vger.kernel.org, linux-phy@lists.infradead.org Cc: Yong Deng , Mauro Carvalho Chehab , Rob Herring , Chen-Yu Tsai , Jernej Skrabec , Samuel Holland , Sakari Ailus , Hans Verkuil , Laurent Pinchart , Paul Kocialkowski , Kishon Vijay Abraham I , Vinod Koul , Maxime Ripard , Thomas Petazzoni , Rob Herring Subject: [PATCH v4 1/8] dt-bindings: sun6i-a31-mipi-dphy: Add optional direction property Date: Fri, 15 Apr 2022 17:21:31 +0200 Message-Id: <20220415152138.635525-2-paul.kocialkowski@bootlin.com> X-Mailer: git-send-email 2.35.2 In-Reply-To: <20220415152138.635525-1-paul.kocialkowski@bootlin.com> References: <20220415152138.635525-1-paul.kocialkowski@bootlin.com> MIME-Version: 1.0 Precedence: bulk List-ID: X-Mailing-List: linux-media@vger.kernel.org The Allwinner A31 MIPI D-PHY block supports both tx and rx directions, although each instance of the block is meant to be used in one direction only. There will typically be one instance for MIPI DSI and one for MIPI CSI-2 (it seems unlikely to ever see a shared instance). Describe the direction with a new allwinner,direction property. For backwards compatibility, the property is optional and tx mode should be assumed by default. Signed-off-by: Paul Kocialkowski Reviewed-by: Rob Herring --- .../bindings/phy/allwinner,sun6i-a31-mipi-dphy.yaml | 12 ++++++++++++ 1 file changed, 12 insertions(+) diff --git a/Documentation/devicetree/bindings/phy/allwinner,sun6i-a31-mipi-dphy.yaml b/Documentation/devicetree/bindings/phy/allwinner,sun6i-a31-mipi-dphy.yaml index d0b541a461f3..22636c9fdab8 100644 --- a/Documentation/devicetree/bindings/phy/allwinner,sun6i-a31-mipi-dphy.yaml +++ b/Documentation/devicetree/bindings/phy/allwinner,sun6i-a31-mipi-dphy.yaml @@ -37,6 +37,18 @@ properties: resets: maxItems: 1 + allwinner,direction: + $ref: '/schemas/types.yaml#/definitions/string' + description: | + Direction of the D-PHY: + - "rx" for receiving (e.g. when used with MIPI CSI-2); + - "tx" for transmitting (e.g. when used with MIPI DSI). + + enum: + - tx + - rx + default: tx + required: - "#phy-cells" - compatible From patchwork Fri Apr 15 15:21:32 2022 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Paul Kocialkowski X-Patchwork-Id: 12815006 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id 9FB62C433F5 for ; Fri, 15 Apr 2022 15:22:05 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1354991AbiDOPYb (ORCPT ); Fri, 15 Apr 2022 11:24:31 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:51950 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1354986AbiDOPY3 (ORCPT ); Fri, 15 Apr 2022 11:24:29 -0400 Received: from relay1-d.mail.gandi.net (relay1-d.mail.gandi.net [217.70.183.193]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 0D49BCA6D6; Fri, 15 Apr 2022 08:21:58 -0700 (PDT) Received: (Authenticated sender: paul.kocialkowski@bootlin.com) by mail.gandi.net (Postfix) with ESMTPSA id 0CBC6240002; Fri, 15 Apr 2022 15:21:54 +0000 (UTC) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=bootlin.com; s=gm1; t=1650036116; h=from:from:reply-to:subject:subject:date:date:message-id:message-id: to:to:cc:cc:mime-version:mime-version: content-transfer-encoding:content-transfer-encoding: in-reply-to:in-reply-to:references:references; bh=eywiaPhcZL2zuOwynizuZKiTidtk+fl4Mcz69zBIfow=; b=QUYzFmjBBQhbc7T8gyh009kEbewNg0EWqGgsVoASWUhQ/yBxk6sRX/3gNWaaoklHi0eXCg oSUHO/szOxb1o1UHgG8u0v6QBYPvI4xqwRW79Po/1Prh56TYY15hPd4oVjC8yYEnkANAXB QIGg8+RSapWZOlwcyDZiIhRb2v91GZ4IkLMgQOiIDxrnMUIexYU3NU4ZTS8863S4RzxgeO g3FJp/t2rZZN8VCJ5Xw55rKbeh7PN6Lu7YUG+rAndVOhtC4GlZHBavKL+nvM+8+pRHFKM2 I33DT4Jad5rXOTfJrALXksDg8DA7sUHjvquSfdAKYKTz5WrMmGSB1K4sCR7Haw== From: Paul Kocialkowski To: linux-media@vger.kernel.org, devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-sunxi@lists.linux.dev, linux-kernel@vger.kernel.org, linux-phy@lists.infradead.org Cc: Yong Deng , Mauro Carvalho Chehab , Rob Herring , Chen-Yu Tsai , Jernej Skrabec , Samuel Holland , Sakari Ailus , Hans Verkuil , Laurent Pinchart , Paul Kocialkowski , Kishon Vijay Abraham I , Vinod Koul , Maxime Ripard , Thomas Petazzoni Subject: [PATCH v4 2/8] phy: allwinner: phy-sun6i-mipi-dphy: Support D-PHY Rx mode for MIPI CSI-2 Date: Fri, 15 Apr 2022 17:21:32 +0200 Message-Id: <20220415152138.635525-3-paul.kocialkowski@bootlin.com> X-Mailer: git-send-email 2.35.2 In-Reply-To: <20220415152138.635525-1-paul.kocialkowski@bootlin.com> References: <20220415152138.635525-1-paul.kocialkowski@bootlin.com> MIME-Version: 1.0 Precedence: bulk List-ID: X-Mailing-List: linux-media@vger.kernel.org The Allwinner A31 D-PHY supports both Rx and Tx modes. While the latter is already supported and used for MIPI DSI this adds support for the former, to be used with MIPI CSI-2. This implementation is inspired by Allwinner's V3s Linux SDK implementation, which was used as a documentation base. It uses the direction dt property to distinguish between tx and rx directions. Signed-off-by: Paul Kocialkowski --- drivers/phy/allwinner/phy-sun6i-mipi-dphy.c | 166 +++++++++++++++++++- 1 file changed, 162 insertions(+), 4 deletions(-) diff --git a/drivers/phy/allwinner/phy-sun6i-mipi-dphy.c b/drivers/phy/allwinner/phy-sun6i-mipi-dphy.c index f0bc87d654d4..3900f1650851 100644 --- a/drivers/phy/allwinner/phy-sun6i-mipi-dphy.c +++ b/drivers/phy/allwinner/phy-sun6i-mipi-dphy.c @@ -24,6 +24,14 @@ #define SUN6I_DPHY_TX_CTL_REG 0x04 #define SUN6I_DPHY_TX_CTL_HS_TX_CLK_CONT BIT(28) +#define SUN6I_DPHY_RX_CTL_REG 0x08 +#define SUN6I_DPHY_RX_CTL_EN_DBC BIT(31) +#define SUN6I_DPHY_RX_CTL_RX_CLK_FORCE BIT(24) +#define SUN6I_DPHY_RX_CTL_RX_D3_FORCE BIT(23) +#define SUN6I_DPHY_RX_CTL_RX_D2_FORCE BIT(22) +#define SUN6I_DPHY_RX_CTL_RX_D1_FORCE BIT(21) +#define SUN6I_DPHY_RX_CTL_RX_D0_FORCE BIT(20) + #define SUN6I_DPHY_TX_TIME0_REG 0x10 #define SUN6I_DPHY_TX_TIME0_HS_TRAIL(n) (((n) & 0xff) << 24) #define SUN6I_DPHY_TX_TIME0_HS_PREPARE(n) (((n) & 0xff) << 16) @@ -44,12 +52,29 @@ #define SUN6I_DPHY_TX_TIME4_HS_TX_ANA1(n) (((n) & 0xff) << 8) #define SUN6I_DPHY_TX_TIME4_HS_TX_ANA0(n) ((n) & 0xff) +#define SUN6I_DPHY_RX_TIME0_REG 0x30 +#define SUN6I_DPHY_RX_TIME0_HS_RX_SYNC(n) (((n) & 0xff) << 24) +#define SUN6I_DPHY_RX_TIME0_HS_RX_CLK_MISS(n) (((n) & 0xff) << 16) +#define SUN6I_DPHY_RX_TIME0_LP_RX(n) (((n) & 0xff) << 8) + +#define SUN6I_DPHY_RX_TIME1_REG 0x34 +#define SUN6I_DPHY_RX_TIME1_RX_DLY(n) (((n) & 0xfff) << 20) +#define SUN6I_DPHY_RX_TIME1_LP_RX_ULPS_WP(n) ((n) & 0xfffff) + +#define SUN6I_DPHY_RX_TIME2_REG 0x38 +#define SUN6I_DPHY_RX_TIME2_HS_RX_ANA1(n) (((n) & 0xff) << 8) +#define SUN6I_DPHY_RX_TIME2_HS_RX_ANA0(n) ((n) & 0xff) + +#define SUN6I_DPHY_RX_TIME3_REG 0x40 +#define SUN6I_DPHY_RX_TIME3_LPRST_DLY(n) (((n) & 0xffff) << 16) + #define SUN6I_DPHY_ANA0_REG 0x4c #define SUN6I_DPHY_ANA0_REG_PWS BIT(31) #define SUN6I_DPHY_ANA0_REG_DMPC BIT(28) #define SUN6I_DPHY_ANA0_REG_DMPD(n) (((n) & 0xf) << 24) #define SUN6I_DPHY_ANA0_REG_SLV(n) (((n) & 7) << 12) #define SUN6I_DPHY_ANA0_REG_DEN(n) (((n) & 0xf) << 8) +#define SUN6I_DPHY_ANA0_REG_SFB(n) (((n) & 3) << 2) #define SUN6I_DPHY_ANA1_REG 0x50 #define SUN6I_DPHY_ANA1_REG_VTTMODE BIT(31) @@ -84,6 +109,11 @@ #define SUN6I_DPHY_DBG5_REG 0xf4 +enum sun6i_dphy_direction { + SUN6I_DPHY_DIRECTION_TX, + SUN6I_DPHY_DIRECTION_RX, +}; + struct sun6i_dphy { struct clk *bus_clk; struct clk *mod_clk; @@ -92,6 +122,8 @@ struct sun6i_dphy { struct phy *phy; struct phy_configure_opts_mipi_dphy config; + + enum sun6i_dphy_direction direction; }; static int sun6i_dphy_init(struct phy *phy) @@ -119,9 +151,8 @@ static int sun6i_dphy_configure(struct phy *phy, union phy_configure_opts *opts) return 0; } -static int sun6i_dphy_power_on(struct phy *phy) +static int sun6i_dphy_tx_power_on(struct sun6i_dphy *dphy) { - struct sun6i_dphy *dphy = phy_get_drvdata(phy); u8 lanes_mask = GENMASK(dphy->config.lanes - 1, 0); regmap_write(dphy->regs, SUN6I_DPHY_TX_CTL_REG, @@ -211,12 +242,129 @@ static int sun6i_dphy_power_on(struct phy *phy) return 0; } +static int sun6i_dphy_rx_power_on(struct sun6i_dphy *dphy) +{ + /* Physical clock rate is actually half of symbol rate with DDR. */ + unsigned long mipi_symbol_rate = dphy->config.hs_clk_rate; + unsigned long dphy_clk_rate; + unsigned int rx_dly; + unsigned int lprst_dly; + u32 value; + + dphy_clk_rate = clk_get_rate(dphy->mod_clk); + if (!dphy_clk_rate) + return -EINVAL; + + /* Hardcoded timing parameters from the Allwinner BSP. */ + regmap_write(dphy->regs, SUN6I_DPHY_RX_TIME0_REG, + SUN6I_DPHY_RX_TIME0_HS_RX_SYNC(255) | + SUN6I_DPHY_RX_TIME0_HS_RX_CLK_MISS(255) | + SUN6I_DPHY_RX_TIME0_LP_RX(255)); + + /* + * Formula from the Allwinner BSP, with hardcoded coefficients + * (probably internal divider/multiplier). + */ + rx_dly = 8 * (unsigned int)(dphy_clk_rate / (mipi_symbol_rate / 8)); + + /* + * The Allwinner BSP has an alternative formula for LP_RX_ULPS_WP: + * lp_ulps_wp_cnt = lp_ulps_wp_ms * lp_clk / 1000 + * but does not use it and hardcodes 255 instead. + */ + regmap_write(dphy->regs, SUN6I_DPHY_RX_TIME1_REG, + SUN6I_DPHY_RX_TIME1_RX_DLY(rx_dly) | + SUN6I_DPHY_RX_TIME1_LP_RX_ULPS_WP(255)); + + /* HS_RX_ANA0 value is hardcoded in the Allwinner BSP. */ + regmap_write(dphy->regs, SUN6I_DPHY_RX_TIME2_REG, + SUN6I_DPHY_RX_TIME2_HS_RX_ANA0(4)); + + /* + * Formula from the Allwinner BSP, with hardcoded coefficients + * (probably internal divider/multiplier). + */ + lprst_dly = 4 * (unsigned int)(dphy_clk_rate / (mipi_symbol_rate / 2)); + + regmap_write(dphy->regs, SUN6I_DPHY_RX_TIME3_REG, + SUN6I_DPHY_RX_TIME3_LPRST_DLY(lprst_dly)); + + /* Analog parameters are hardcoded in the Allwinner BSP. */ + regmap_write(dphy->regs, SUN6I_DPHY_ANA0_REG, + SUN6I_DPHY_ANA0_REG_PWS | + SUN6I_DPHY_ANA0_REG_SLV(7) | + SUN6I_DPHY_ANA0_REG_SFB(2)); + + regmap_write(dphy->regs, SUN6I_DPHY_ANA1_REG, + SUN6I_DPHY_ANA1_REG_SVTT(4)); + + regmap_write(dphy->regs, SUN6I_DPHY_ANA4_REG, + SUN6I_DPHY_ANA4_REG_DMPLVC | + SUN6I_DPHY_ANA4_REG_DMPLVD(1)); + + regmap_write(dphy->regs, SUN6I_DPHY_ANA2_REG, + SUN6I_DPHY_ANA2_REG_ENIB); + + regmap_write(dphy->regs, SUN6I_DPHY_ANA3_REG, + SUN6I_DPHY_ANA3_EN_LDOR | + SUN6I_DPHY_ANA3_EN_LDOC | + SUN6I_DPHY_ANA3_EN_LDOD); + + /* + * Delay comes from the Allwinner BSP, likely for internal regulator + * ramp-up. + */ + udelay(3); + + value = SUN6I_DPHY_RX_CTL_EN_DBC | SUN6I_DPHY_RX_CTL_RX_CLK_FORCE; + + /* + * Rx data lane force-enable bits are used as regular RX enable by the + * Allwinner BSP. + */ + if (dphy->config.lanes >= 1) + value |= SUN6I_DPHY_RX_CTL_RX_D0_FORCE; + if (dphy->config.lanes >= 2) + value |= SUN6I_DPHY_RX_CTL_RX_D1_FORCE; + if (dphy->config.lanes >= 3) + value |= SUN6I_DPHY_RX_CTL_RX_D2_FORCE; + if (dphy->config.lanes == 4) + value |= SUN6I_DPHY_RX_CTL_RX_D3_FORCE; + + regmap_write(dphy->regs, SUN6I_DPHY_RX_CTL_REG, value); + + regmap_write(dphy->regs, SUN6I_DPHY_GCTL_REG, + SUN6I_DPHY_GCTL_LANE_NUM(dphy->config.lanes) | + SUN6I_DPHY_GCTL_EN); + + return 0; +} + +static int sun6i_dphy_power_on(struct phy *phy) +{ + struct sun6i_dphy *dphy = phy_get_drvdata(phy); + + switch (dphy->direction) { + case SUN6I_DPHY_DIRECTION_TX: + return sun6i_dphy_tx_power_on(dphy); + case SUN6I_DPHY_DIRECTION_RX: + return sun6i_dphy_rx_power_on(dphy); + default: + return -EINVAL; + } +} + static int sun6i_dphy_power_off(struct phy *phy) { struct sun6i_dphy *dphy = phy_get_drvdata(phy); - regmap_update_bits(dphy->regs, SUN6I_DPHY_ANA1_REG, - SUN6I_DPHY_ANA1_REG_VTTMODE, 0); + regmap_write(dphy->regs, SUN6I_DPHY_GCTL_REG, 0); + + regmap_write(dphy->regs, SUN6I_DPHY_ANA0_REG, 0); + regmap_write(dphy->regs, SUN6I_DPHY_ANA1_REG, 0); + regmap_write(dphy->regs, SUN6I_DPHY_ANA2_REG, 0); + regmap_write(dphy->regs, SUN6I_DPHY_ANA3_REG, 0); + regmap_write(dphy->regs, SUN6I_DPHY_ANA4_REG, 0); return 0; } @@ -253,7 +401,9 @@ static int sun6i_dphy_probe(struct platform_device *pdev) { struct phy_provider *phy_provider; struct sun6i_dphy *dphy; + const char *direction; void __iomem *regs; + int ret; dphy = devm_kzalloc(&pdev->dev, sizeof(*dphy), GFP_KERNEL); if (!dphy) @@ -290,6 +440,14 @@ static int sun6i_dphy_probe(struct platform_device *pdev) return PTR_ERR(dphy->phy); } + dphy->direction = SUN6I_DPHY_DIRECTION_TX; + + ret = of_property_read_string(pdev->dev.of_node, "allwinner,direction", + &direction); + + if (!ret && !strncmp(direction, "rx", 2)) + dphy->direction = SUN6I_DPHY_DIRECTION_RX; + phy_set_drvdata(dphy->phy, dphy); phy_provider = devm_of_phy_provider_register(&pdev->dev, of_phy_simple_xlate); From patchwork Fri Apr 15 15:21:33 2022 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Paul Kocialkowski X-Patchwork-Id: 12815007 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id 654C7C433EF for ; Fri, 15 Apr 2022 15:22:08 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1355000AbiDOPYd (ORCPT ); Fri, 15 Apr 2022 11:24:33 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:51952 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1354987AbiDOPY3 (ORCPT ); Fri, 15 Apr 2022 11:24:29 -0400 Received: from relay1-d.mail.gandi.net (relay1-d.mail.gandi.net [IPv6:2001:4b98:dc4:8::221]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 44369CB02C; Fri, 15 Apr 2022 08:22:00 -0700 (PDT) Received: (Authenticated sender: paul.kocialkowski@bootlin.com) by mail.gandi.net (Postfix) with ESMTPSA id EBAC624000C; Fri, 15 Apr 2022 15:21:56 +0000 (UTC) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=bootlin.com; s=gm1; t=1650036118; h=from:from:reply-to:subject:subject:date:date:message-id:message-id: to:to:cc:cc:mime-version:mime-version: content-transfer-encoding:content-transfer-encoding: in-reply-to:in-reply-to:references:references; bh=gwujoudO+mxD7JUpVLmNFyezlsG725sqpIX2zlDa2Ao=; b=KhEwIruN4e1q0+CKrmMHh3a7S/WgvFJeDk7ZEDZkjl7E63mUI9CBtcAHjuNiQTZDd52BCe iKzUZTj9rgqAzvllaI5GtHWJPo/X61XecZd/5ZmadGiG13u5mfUF0ZfL1f0lnXDwGrvRTs KHnDVAyweQoC9WlpL51sYEjs7FgWeFJsgI+dSmU+C1AegQCN4aEOMFSbaKo7S5PNfOwC4t un/1EooaqRrQx+r5HTsRxnBsR44Twv+jjH6QqVgt5mmCyfODybZgwoxyP01mxXcDFUH6uu v0B30JbGhSoQ2zrrcBz86jzTEOh0lxU/GaWEL315gRZnuvG7Gm3Wa+k/htnmgQ== From: Paul Kocialkowski To: linux-media@vger.kernel.org, devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-sunxi@lists.linux.dev, linux-kernel@vger.kernel.org, linux-phy@lists.infradead.org Cc: Yong Deng , Mauro Carvalho Chehab , Rob Herring , Chen-Yu Tsai , Jernej Skrabec , Samuel Holland , Sakari Ailus , Hans Verkuil , Laurent Pinchart , Paul Kocialkowski , Kishon Vijay Abraham I , Vinod Koul , Maxime Ripard , Thomas Petazzoni , Rob Herring Subject: [PATCH v4 3/8] dt-bindings: media: sun6i-a31-csi: Add MIPI CSI-2 input port Date: Fri, 15 Apr 2022 17:21:33 +0200 Message-Id: <20220415152138.635525-4-paul.kocialkowski@bootlin.com> X-Mailer: git-send-email 2.35.2 In-Reply-To: <20220415152138.635525-1-paul.kocialkowski@bootlin.com> References: <20220415152138.635525-1-paul.kocialkowski@bootlin.com> MIME-Version: 1.0 Precedence: bulk List-ID: X-Mailing-List: linux-media@vger.kernel.org The A31 CSI controller supports two distinct input interfaces: parallel and an external MIPI CSI-2 bridge. The parallel interface is often connected to a set of hardware pins while the MIPI CSI-2 bridge is an internal FIFO-ish link. As a result, these two inputs are distinguished as two different ports. Note that only one of the two may be present on a controller instance. For example, the V3s has one controller dedicated to MIPI-CSI2 and one dedicated to parallel. Update the binding with an explicit ports node that holds two distinct port nodes: one for parallel input and one for MIPI CSI-2. This is backward-compatible with the single-port approach that was previously taken for representing the parallel interface port, which stays enumerated as fwnode port 0. Note that additional ports may be added in the future, especially to support feeding the CSI controller's output to the ISP. Signed-off-by: Paul Kocialkowski Reviewed-by: Rob Herring Acked-by: Maxime Ripard --- .../media/allwinner,sun6i-a31-csi.yaml | 72 +++++++++++++++---- 1 file changed, 58 insertions(+), 14 deletions(-) diff --git a/Documentation/devicetree/bindings/media/allwinner,sun6i-a31-csi.yaml b/Documentation/devicetree/bindings/media/allwinner,sun6i-a31-csi.yaml index 8b568072a069..53aa6dbe8e2c 100644 --- a/Documentation/devicetree/bindings/media/allwinner,sun6i-a31-csi.yaml +++ b/Documentation/devicetree/bindings/media/allwinner,sun6i-a31-csi.yaml @@ -42,6 +42,7 @@ properties: port: $ref: /schemas/graph.yaml#/$defs/port-base + description: Parallel input port, connect to a parallel sensor properties: endpoint: @@ -59,7 +60,38 @@ properties: required: - bus-width - additionalProperties: false + unevaluatedProperties: false + + ports: + $ref: /schemas/graph.yaml#/properties/ports + + properties: + port@0: + $ref: "#/properties/port" + + properties: + reg: + const: 0 + + port@1: + $ref: /schemas/graph.yaml#/$defs/port-base + description: MIPI CSI-2 bridge input port + + properties: + reg: + const: 1 + + endpoint: + $ref: /schemas/graph.yaml#/$defs/endpoint-base + unevaluatedProperties: false + + additionalProperties: false + + anyOf: + - required: + - port@0 + - required: + - port@1 required: - compatible @@ -69,6 +101,12 @@ required: - clock-names - resets +oneOf: + - required: + - ports + - required: + - port + additionalProperties: false examples: @@ -89,19 +127,25 @@ examples: "ram"; resets = <&ccu RST_BUS_CSI>; - port { - /* Parallel bus endpoint */ - csi1_ep: endpoint { - remote-endpoint = <&adv7611_ep>; - bus-width = <16>; - - /* - * If hsync-active/vsync-active are missing, - * embedded BT.656 sync is used. - */ - hsync-active = <0>; /* Active low */ - vsync-active = <0>; /* Active low */ - pclk-sample = <1>; /* Rising */ + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + /* Parallel bus endpoint */ + csi1_ep: endpoint { + remote-endpoint = <&adv7611_ep>; + bus-width = <16>; + + /* + * If hsync-active/vsync-active are missing, + * embedded BT.656 sync is used. + */ + hsync-active = <0>; /* Active low */ + vsync-active = <0>; /* Active low */ + pclk-sample = <1>; /* Rising */ + }; }; }; }; From patchwork Fri Apr 15 15:21:34 2022 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Paul Kocialkowski X-Patchwork-Id: 12815008 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id 14EC6C433FE for ; Fri, 15 Apr 2022 15:22:12 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1355018AbiDOPYi (ORCPT ); Fri, 15 Apr 2022 11:24:38 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:52108 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1354990AbiDOPYb (ORCPT ); Fri, 15 Apr 2022 11:24:31 -0400 Received: from relay1-d.mail.gandi.net (relay1-d.mail.gandi.net [217.70.183.193]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 3D9AFCC531; Fri, 15 Apr 2022 08:22:01 -0700 (PDT) Received: (Authenticated sender: paul.kocialkowski@bootlin.com) by mail.gandi.net (Postfix) with ESMTPSA id E27A024000E; Fri, 15 Apr 2022 15:21:58 +0000 (UTC) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=bootlin.com; s=gm1; t=1650036120; h=from:from:reply-to:subject:subject:date:date:message-id:message-id: to:to:cc:cc:mime-version:mime-version: content-transfer-encoding:content-transfer-encoding: in-reply-to:in-reply-to:references:references; bh=dlmtqlwBZ9Nvsx0qmEc8iiAYxYop1xZMJTyPdpSB/UI=; b=R55tqNIupoPWJFsCA0AqbGUmypF8vKfwicxWgL39jREhj9DsVMvB/vVpplUIvl77cvuYt+ Tje56pv07HOyK9yCu0Al3yM9C3o7Yf72LRld3DMacKBeT0uLuP16i5Nc+ZuHk1tIKjZqSE uflDtLfy5wHOv1OjZ/RfV/B7Xj9O6NiujLoMQ6MarswNnMbZ+f9XYxSJSeSt4neP+5mjwo p2PhnwndzknqlnW37JpQKndzE2HrY+MtmtKuip4wo0hSB/ZEt145kjAzuJURjK1dXyOqb5 s9jbvwGDzZrL+WrqM4Mx+QzRqEYkcAaKGB3CLdZwBiVsWunjiC4QFXPtlmsveg== From: Paul Kocialkowski To: linux-media@vger.kernel.org, devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-sunxi@lists.linux.dev, linux-kernel@vger.kernel.org, linux-phy@lists.infradead.org Cc: Yong Deng , Mauro Carvalho Chehab , Rob Herring , Chen-Yu Tsai , Jernej Skrabec , Samuel Holland , Sakari Ailus , Hans Verkuil , Laurent Pinchart , Paul Kocialkowski , Kishon Vijay Abraham I , Vinod Koul , Maxime Ripard , Thomas Petazzoni , Rob Herring Subject: [PATCH v4 4/8] dt-bindings: media: Add Allwinner A31 MIPI CSI-2 bindings documentation Date: Fri, 15 Apr 2022 17:21:34 +0200 Message-Id: <20220415152138.635525-5-paul.kocialkowski@bootlin.com> X-Mailer: git-send-email 2.35.2 In-Reply-To: <20220415152138.635525-1-paul.kocialkowski@bootlin.com> References: <20220415152138.635525-1-paul.kocialkowski@bootlin.com> MIME-Version: 1.0 Precedence: bulk List-ID: X-Mailing-List: linux-media@vger.kernel.org This introduces YAML bindings documentation for the Allwinner A31 MIPI CSI-2 controller. Signed-off-by: Paul Kocialkowski Reviewed-by: Maxime Ripard Reviewed-by: Rob Herring --- .../media/allwinner,sun6i-a31-mipi-csi2.yaml | 147 ++++++++++++++++++ 1 file changed, 147 insertions(+) create mode 100644 Documentation/devicetree/bindings/media/allwinner,sun6i-a31-mipi-csi2.yaml diff --git a/Documentation/devicetree/bindings/media/allwinner,sun6i-a31-mipi-csi2.yaml b/Documentation/devicetree/bindings/media/allwinner,sun6i-a31-mipi-csi2.yaml new file mode 100644 index 000000000000..90597661e402 --- /dev/null +++ b/Documentation/devicetree/bindings/media/allwinner,sun6i-a31-mipi-csi2.yaml @@ -0,0 +1,147 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/allwinner,sun6i-a31-mipi-csi2.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Allwinner A31 MIPI CSI-2 Device Tree Bindings + +maintainers: + - Paul Kocialkowski + +properties: + compatible: + oneOf: + - const: allwinner,sun6i-a31-mipi-csi2 + - items: + - const: allwinner,sun8i-v3s-mipi-csi2 + - const: allwinner,sun6i-a31-mipi-csi2 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + items: + - description: Bus Clock + - description: Module Clock + + clock-names: + items: + - const: bus + - const: mod + + phys: + maxItems: 1 + description: MIPI D-PHY + + phy-names: + items: + - const: dphy + + resets: + maxItems: 1 + + ports: + $ref: /schemas/graph.yaml#/properties/ports + + properties: + port@0: + $ref: /schemas/graph.yaml#/$defs/port-base + description: Input port, connect to a MIPI CSI-2 sensor + + properties: + reg: + const: 0 + + endpoint: + $ref: video-interfaces.yaml# + unevaluatedProperties: false + + properties: + data-lanes: + minItems: 1 + maxItems: 4 + + required: + - data-lanes + + additionalProperties: false + + port@1: + $ref: /schemas/graph.yaml#/$defs/port-base + description: Output port, connect to a CSI controller + + properties: + reg: + const: 1 + + endpoint: + $ref: /schemas/graph.yaml#/$defs/endpoint-base + unevaluatedProperties: false + + additionalProperties: false + + required: + - port@0 + - port@1 + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + - phys + - phy-names + - resets + - ports + +additionalProperties: false + +examples: + - | + #include + #include + #include + + mipi_csi2: csi@1cb1000 { + compatible = "allwinner,sun8i-v3s-mipi-csi2", + "allwinner,sun6i-a31-mipi-csi2"; + reg = <0x01cb1000 0x1000>; + interrupts = ; + clocks = <&ccu CLK_BUS_CSI>, + <&ccu CLK_CSI1_SCLK>; + clock-names = "bus", "mod"; + resets = <&ccu RST_BUS_CSI>; + + phys = <&dphy>; + phy-names = "dphy"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + mipi_csi2_in: port@0 { + reg = <0>; + + mipi_csi2_in_ov5648: endpoint { + data-lanes = <1 2 3 4>; + + remote-endpoint = <&ov5648_out_mipi_csi2>; + }; + }; + + mipi_csi2_out: port@1 { + reg = <1>; + + mipi_csi2_out_csi0: endpoint { + remote-endpoint = <&csi0_in_mipi_csi2>; + }; + }; + }; + }; + +... From patchwork Fri Apr 15 15:21:35 2022 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Paul Kocialkowski X-Patchwork-Id: 12815011 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id 925D5C433F5 for ; Fri, 15 Apr 2022 15:22:17 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1355041AbiDOPYn (ORCPT ); Fri, 15 Apr 2022 11:24:43 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:52344 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1355011AbiDOPYh (ORCPT ); Fri, 15 Apr 2022 11:24:37 -0400 Received: from relay1-d.mail.gandi.net (relay1-d.mail.gandi.net [IPv6:2001:4b98:dc4:8::221]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 5F4A2CD33E; Fri, 15 Apr 2022 08:22:03 -0700 (PDT) Received: (Authenticated sender: paul.kocialkowski@bootlin.com) by mail.gandi.net (Postfix) with ESMTPSA id DA0FC240009; Fri, 15 Apr 2022 15:22:00 +0000 (UTC) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=bootlin.com; s=gm1; t=1650036122; h=from:from:reply-to:subject:subject:date:date:message-id:message-id: to:to:cc:cc:mime-version:mime-version: content-transfer-encoding:content-transfer-encoding: in-reply-to:in-reply-to:references:references; bh=10b4S4mz35oiylfbMWhjO8E35+RXi/3xmkw3KSPKXkw=; b=g8M2lgT5YYI10n/XUCPpCkISXgzPCU/P7d9Z6K/NMbLDcTjBgVacGCjRQCGWiAHpuc6w1F gsCS2oGLgNH3j/QCkJkou2NU6UWFuPV37YNOlakFbZSfoxgXtOJiAw7d1fUFtMBmkgvtwi lbYH9AeHg3PSRwjj8LhVhJTiyp/KfDFH9roOS0VCLPotz6wmdBfIQG2b/HXsqZoE6DCwiH 1Fo84eM221HIMP25prNGRgC+WNWQFJGklzch4EtFWWxT6ek+QnyhCsVLWWcKEQ2zSZM8In GGwr9dYvdrdb4E5+W22S5U5Sfw4FRQ5RWnUaFo+5AF4q2Wf5z55B8aytcLWiVA== From: Paul Kocialkowski To: linux-media@vger.kernel.org, devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-sunxi@lists.linux.dev, linux-kernel@vger.kernel.org, linux-phy@lists.infradead.org Cc: Yong Deng , Mauro Carvalho Chehab , Rob Herring , Chen-Yu Tsai , Jernej Skrabec , Samuel Holland , Sakari Ailus , Hans Verkuil , Laurent Pinchart , Paul Kocialkowski , Kishon Vijay Abraham I , Vinod Koul , Maxime Ripard , Thomas Petazzoni Subject: [PATCH v4 5/8] media: sunxi: Add support for the A31 MIPI CSI-2 controller Date: Fri, 15 Apr 2022 17:21:35 +0200 Message-Id: <20220415152138.635525-6-paul.kocialkowski@bootlin.com> X-Mailer: git-send-email 2.35.2 In-Reply-To: <20220415152138.635525-1-paul.kocialkowski@bootlin.com> References: <20220415152138.635525-1-paul.kocialkowski@bootlin.com> MIME-Version: 1.0 Precedence: bulk List-ID: X-Mailing-List: linux-media@vger.kernel.org The A31 MIPI CSI-2 controller is a dedicated MIPI CSI-2 bridge found on Allwinner SoCs such as the A31 and V3/V3s. It is a standalone block, connected to the CSI controller on one side and to the MIPI D-PHY block on the other. It has a dedicated address space, interrupt line and clock. It is represented as a V4L2 subdev to the CSI controller and takes a MIPI CSI-2 sensor as its own subdev, all using the fwnode graph and media controller API. Only 8-bit and 10-bit Bayer formats are currently supported. While up to 4 internal channels to the CSI controller exist, only one is currently supported by this implementation. Signed-off-by: Paul Kocialkowski Acked-by: Maxime Ripard --- drivers/media/platform/sunxi/Kconfig | 1 + drivers/media/platform/sunxi/Makefile | 1 + .../platform/sunxi/sun6i-mipi-csi2/Kconfig | 14 + .../platform/sunxi/sun6i-mipi-csi2/Makefile | 4 + .../sunxi/sun6i-mipi-csi2/sun6i_mipi_csi2.c | 749 ++++++++++++++++++ .../sunxi/sun6i-mipi-csi2/sun6i_mipi_csi2.h | 52 ++ .../sun6i-mipi-csi2/sun6i_mipi_csi2_reg.h | 76 ++ 7 files changed, 897 insertions(+) create mode 100644 drivers/media/platform/sunxi/sun6i-mipi-csi2/Kconfig create mode 100644 drivers/media/platform/sunxi/sun6i-mipi-csi2/Makefile create mode 100644 drivers/media/platform/sunxi/sun6i-mipi-csi2/sun6i_mipi_csi2.c create mode 100644 drivers/media/platform/sunxi/sun6i-mipi-csi2/sun6i_mipi_csi2.h create mode 100644 drivers/media/platform/sunxi/sun6i-mipi-csi2/sun6i_mipi_csi2_reg.h diff --git a/drivers/media/platform/sunxi/Kconfig b/drivers/media/platform/sunxi/Kconfig index 46b7b9bf989c..d33dce2e444b 100644 --- a/drivers/media/platform/sunxi/Kconfig +++ b/drivers/media/platform/sunxi/Kconfig @@ -4,5 +4,6 @@ comment "Sunxi media platform drivers" source "drivers/media/platform/sunxi/sun4i-csi/Kconfig" source "drivers/media/platform/sunxi/sun6i-csi/Kconfig" +source "drivers/media/platform/sunxi/sun6i-mipi-csi2/Kconfig" source "drivers/media/platform/sunxi/sun8i-di/Kconfig" source "drivers/media/platform/sunxi/sun8i-rotate/Kconfig" diff --git a/drivers/media/platform/sunxi/Makefile b/drivers/media/platform/sunxi/Makefile index fc537c9f5ca9..887a7cae8fca 100644 --- a/drivers/media/platform/sunxi/Makefile +++ b/drivers/media/platform/sunxi/Makefile @@ -2,5 +2,6 @@ obj-y += sun4i-csi/ obj-y += sun6i-csi/ +obj-y += sun6i-mipi-csi2/ obj-y += sun8i-di/ obj-y += sun8i-rotate/ diff --git a/drivers/media/platform/sunxi/sun6i-mipi-csi2/Kconfig b/drivers/media/platform/sunxi/sun6i-mipi-csi2/Kconfig new file mode 100644 index 000000000000..b1712f5873fd --- /dev/null +++ b/drivers/media/platform/sunxi/sun6i-mipi-csi2/Kconfig @@ -0,0 +1,14 @@ +# SPDX-License-Identifier: GPL-2.0-only +config VIDEO_SUN6I_MIPI_CSI2 + tristate "Allwinner A31 MIPI CSI-2 Controller Driver" + depends on V4L_PLATFORM_DRIVERS && VIDEO_DEV + depends on ARCH_SUNXI || COMPILE_TEST + depends on PM && COMMON_CLK + select MEDIA_CONTROLLER + select VIDEO_V4L2_SUBDEV_API + select V4L2_FWNODE + select PHY_SUN6I_MIPI_DPHY + select REGMAP_MMIO + help + Support for the Allwinner A31 MIPI CSI-2 controller, also found on + other platforms such as the V3/V3s. diff --git a/drivers/media/platform/sunxi/sun6i-mipi-csi2/Makefile b/drivers/media/platform/sunxi/sun6i-mipi-csi2/Makefile new file mode 100644 index 000000000000..14e4e03818b5 --- /dev/null +++ b/drivers/media/platform/sunxi/sun6i-mipi-csi2/Makefile @@ -0,0 +1,4 @@ +# SPDX-License-Identifier: GPL-2.0-only +sun6i-mipi-csi2-y += sun6i_mipi_csi2.o + +obj-$(CONFIG_VIDEO_SUN6I_MIPI_CSI2) += sun6i-mipi-csi2.o diff --git a/drivers/media/platform/sunxi/sun6i-mipi-csi2/sun6i_mipi_csi2.c b/drivers/media/platform/sunxi/sun6i-mipi-csi2/sun6i_mipi_csi2.c new file mode 100644 index 000000000000..31e12f1506cb --- /dev/null +++ b/drivers/media/platform/sunxi/sun6i-mipi-csi2/sun6i_mipi_csi2.c @@ -0,0 +1,749 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright 2020-2022 Bootlin + * Author: Paul Kocialkowski + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "sun6i_mipi_csi2.h" +#include "sun6i_mipi_csi2_reg.h" + +/* Format */ + +static const struct sun6i_mipi_csi2_format sun6i_mipi_csi2_formats[] = { + { + .mbus_code = MEDIA_BUS_FMT_SBGGR8_1X8, + .data_type = MIPI_CSI2_DT_RAW8, + .bpp = 8, + }, + { + .mbus_code = MEDIA_BUS_FMT_SGBRG8_1X8, + .data_type = MIPI_CSI2_DT_RAW8, + .bpp = 8, + }, + { + .mbus_code = MEDIA_BUS_FMT_SGRBG8_1X8, + .data_type = MIPI_CSI2_DT_RAW8, + .bpp = 8, + }, + { + .mbus_code = MEDIA_BUS_FMT_SRGGB8_1X8, + .data_type = MIPI_CSI2_DT_RAW8, + .bpp = 8, + }, + { + .mbus_code = MEDIA_BUS_FMT_SBGGR10_1X10, + .data_type = MIPI_CSI2_DT_RAW10, + .bpp = 10, + }, + { + .mbus_code = MEDIA_BUS_FMT_SGBRG10_1X10, + .data_type = MIPI_CSI2_DT_RAW10, + .bpp = 10, + }, + { + .mbus_code = MEDIA_BUS_FMT_SGRBG10_1X10, + .data_type = MIPI_CSI2_DT_RAW10, + .bpp = 10, + }, + { + .mbus_code = MEDIA_BUS_FMT_SRGGB10_1X10, + .data_type = MIPI_CSI2_DT_RAW10, + .bpp = 10, + }, +}; + +static const struct sun6i_mipi_csi2_format * +sun6i_mipi_csi2_format_find(u32 mbus_code) +{ + unsigned int i; + + for (i = 0; i < ARRAY_SIZE(sun6i_mipi_csi2_formats); i++) + if (sun6i_mipi_csi2_formats[i].mbus_code == mbus_code) + return &sun6i_mipi_csi2_formats[i]; + + return NULL; +} + +/* Controller */ + +static void sun6i_mipi_csi2_enable(struct sun6i_mipi_csi2_device *csi2_dev) +{ + struct regmap *regmap = csi2_dev->regmap; + + regmap_update_bits(regmap, SUN6I_MIPI_CSI2_CTL_REG, + SUN6I_MIPI_CSI2_CTL_EN, SUN6I_MIPI_CSI2_CTL_EN); +} + +static void sun6i_mipi_csi2_disable(struct sun6i_mipi_csi2_device *csi2_dev) +{ + struct regmap *regmap = csi2_dev->regmap; + + regmap_update_bits(regmap, SUN6I_MIPI_CSI2_CTL_REG, + SUN6I_MIPI_CSI2_CTL_EN, 0); +} + +static void sun6i_mipi_csi2_configure(struct sun6i_mipi_csi2_device *csi2_dev) +{ + struct regmap *regmap = csi2_dev->regmap; + unsigned int lanes_count = + csi2_dev->bridge.endpoint.bus.mipi_csi2.num_data_lanes; + struct v4l2_mbus_framefmt *mbus_format = &csi2_dev->bridge.mbus_format; + const struct sun6i_mipi_csi2_format *format; + struct device *dev = csi2_dev->dev; + u32 version = 0; + + format = sun6i_mipi_csi2_format_find(mbus_format->code); + if (WARN_ON(!format)) + return; + + /* + * The enable flow in the Allwinner BSP is a bit different: the enable + * and reset bits are set together before starting the CSI controller. + * + * In mainline we enable the CSI controller first (due to subdev logic). + * One reliable way to make this work is to deassert reset, configure + * registers and enable the controller when everything's ready. + * + * However, setting the version enable bit and removing it afterwards + * appears necessary for capture to work reliably, while replacing it + * with a delay doesn't do the trick. + */ + regmap_write(regmap, SUN6I_MIPI_CSI2_CTL_REG, + SUN6I_MIPI_CSI2_CTL_RESET_N | + SUN6I_MIPI_CSI2_CTL_VERSION_EN | + SUN6I_MIPI_CSI2_CTL_UNPK_EN); + + regmap_read(regmap, SUN6I_MIPI_CSI2_VERSION_REG, &version); + + regmap_update_bits(regmap, SUN6I_MIPI_CSI2_CTL_REG, + SUN6I_MIPI_CSI2_CTL_VERSION_EN, 0); + + dev_dbg(dev, "A31 MIPI CSI-2 version: %04x\n", version); + + regmap_write(regmap, SUN6I_MIPI_CSI2_CFG_REG, + SUN6I_MIPI_CSI2_CFG_CHANNEL_MODE(1) | + SUN6I_MIPI_CSI2_CFG_LANE_COUNT(lanes_count)); + + /* + * Only a single virtual channel (index 0) is currently supported. + * While the registers do mention multiple physical channels being + * available (which can be configured to match a specific virtual + * channel or data type), it's unclear whether channels > 0 are actually + * connected and available and the reference source code only makes use + * of channel 0. + * + * Using extra channels would also require matching channels to be + * available on the CSI (and ISP) side, which is also unsure although + * some CSI implementations are said to support multiple channels for + * BT656 time-sharing. + * + * We still configure virtual channel numbers to ensure that virtual + * channel 0 only goes to channel 0. + */ + + regmap_write(regmap, SUN6I_MIPI_CSI2_VCDT_RX_REG, + SUN6I_MIPI_CSI2_VCDT_RX_CH_VC(3, 3) | + SUN6I_MIPI_CSI2_VCDT_RX_CH_VC(2, 2) | + SUN6I_MIPI_CSI2_VCDT_RX_CH_VC(1, 1) | + SUN6I_MIPI_CSI2_VCDT_RX_CH_VC(0, 0) | + SUN6I_MIPI_CSI2_VCDT_RX_CH_DT(0, format->data_type)); + + regmap_write(regmap, SUN6I_MIPI_CSI2_CH_INT_PD_REG, + SUN6I_MIPI_CSI2_CH_INT_PD_CLEAR); +} + +/* V4L2 Subdev */ + +static int sun6i_mipi_csi2_s_stream(struct v4l2_subdev *subdev, int on) +{ + struct sun6i_mipi_csi2_device *csi2_dev = v4l2_get_subdevdata(subdev); + struct v4l2_subdev *source_subdev = csi2_dev->bridge.source_subdev; + union phy_configure_opts dphy_opts = { 0 }; + struct phy_configure_opts_mipi_dphy *dphy_cfg = &dphy_opts.mipi_dphy; + struct v4l2_mbus_framefmt *mbus_format = &csi2_dev->bridge.mbus_format; + const struct sun6i_mipi_csi2_format *format; + struct phy *dphy = csi2_dev->dphy; + struct device *dev = csi2_dev->dev; + struct v4l2_ctrl *ctrl; + unsigned int lanes_count = + csi2_dev->bridge.endpoint.bus.mipi_csi2.num_data_lanes; + unsigned long pixel_rate; + /* Initialize to 0 to use both in disable label (ret != 0) and off. */ + int ret = 0; + + if (!source_subdev) + return -ENODEV; + + if (!on) { + v4l2_subdev_call(source_subdev, video, s_stream, 0); + goto disable; + } + + /* Runtime PM */ + + ret = pm_runtime_resume_and_get(dev); + if (ret < 0) + return ret; + + /* Sensor Pixel Rate */ + + ctrl = v4l2_ctrl_find(source_subdev->ctrl_handler, V4L2_CID_PIXEL_RATE); + if (!ctrl) { + dev_err(dev, "missing sensor pixel rate\n"); + ret = -ENODEV; + goto error_pm; + } + + pixel_rate = (unsigned long)v4l2_ctrl_g_ctrl_int64(ctrl); + if (!pixel_rate) { + dev_err(dev, "missing (zero) sensor pixel rate\n"); + ret = -ENODEV; + goto error_pm; + } + + /* D-PHY */ + + if (!lanes_count) { + dev_err(dev, "missing (zero) MIPI CSI-2 lanes count\n"); + ret = -ENODEV; + goto error_pm; + } + + format = sun6i_mipi_csi2_format_find(mbus_format->code); + if (WARN_ON(!format)) { + ret = -ENODEV; + goto error_pm; + } + + phy_mipi_dphy_get_default_config(pixel_rate, format->bpp, lanes_count, + dphy_cfg); + + /* + * Note that our hardware is using DDR, which is not taken in account by + * phy_mipi_dphy_get_default_config when calculating hs_clk_rate from + * the pixel rate, lanes count and bpp. + * + * The resulting clock rate is basically the symbol rate over the whole + * link. The actual clock rate is calculated with division by two since + * DDR samples both on rising and falling edges. + */ + + dev_dbg(dev, "A31 MIPI CSI-2 config:\n"); + dev_dbg(dev, "%ld pixels/s, %u bits/pixel, %u lanes, %lu Hz clock\n", + pixel_rate, format->bpp, lanes_count, + dphy_cfg->hs_clk_rate / 2); + + ret = phy_reset(dphy); + if (ret) { + dev_err(dev, "failed to reset MIPI D-PHY\n"); + goto error_pm; + } + + ret = phy_configure(dphy, &dphy_opts); + if (ret) { + dev_err(dev, "failed to configure MIPI D-PHY\n"); + goto error_pm; + } + + /* Controller */ + + sun6i_mipi_csi2_configure(csi2_dev); + sun6i_mipi_csi2_enable(csi2_dev); + + /* D-PHY */ + + ret = phy_power_on(dphy); + if (ret) { + dev_err(dev, "failed to power on MIPI D-PHY\n"); + goto error_pm; + } + + /* Source */ + + ret = v4l2_subdev_call(source_subdev, video, s_stream, 1); + if (ret && ret != -ENOIOCTLCMD) + goto disable; + + return 0; + +disable: + phy_power_off(dphy); + sun6i_mipi_csi2_disable(csi2_dev); + +error_pm: + pm_runtime_put(dev); + + return ret; +} + +static const struct v4l2_subdev_video_ops sun6i_mipi_csi2_video_ops = { + .s_stream = sun6i_mipi_csi2_s_stream, +}; + +static void +sun6i_mipi_csi2_mbus_format_prepare(struct v4l2_mbus_framefmt *mbus_format) +{ + if (!sun6i_mipi_csi2_format_find(mbus_format->code)) + mbus_format->code = sun6i_mipi_csi2_formats[0].mbus_code; + + mbus_format->field = V4L2_FIELD_NONE; + mbus_format->colorspace = V4L2_COLORSPACE_RAW; + mbus_format->quantization = V4L2_QUANTIZATION_DEFAULT; + mbus_format->xfer_func = V4L2_XFER_FUNC_DEFAULT; +} + +static int sun6i_mipi_csi2_init_cfg(struct v4l2_subdev *subdev, + struct v4l2_subdev_state *state) +{ + struct sun6i_mipi_csi2_device *csi2_dev = v4l2_get_subdevdata(subdev); + unsigned int pad = SUN6I_MIPI_CSI2_PAD_SINK; + struct v4l2_mbus_framefmt *mbus_format = + v4l2_subdev_get_try_format(subdev, state, pad); + struct mutex *lock = &csi2_dev->bridge.lock; + + mutex_lock(lock); + + mbus_format->code = sun6i_mipi_csi2_formats[0].mbus_code; + mbus_format->width = 640; + mbus_format->height = 480; + + sun6i_mipi_csi2_mbus_format_prepare(mbus_format); + + mutex_unlock(lock); + + return 0; +} + +static int +sun6i_mipi_csi2_enum_mbus_code(struct v4l2_subdev *subdev, + struct v4l2_subdev_state *state, + struct v4l2_subdev_mbus_code_enum *code_enum) +{ + if (code_enum->index >= ARRAY_SIZE(sun6i_mipi_csi2_formats)) + return -EINVAL; + + code_enum->code = sun6i_mipi_csi2_formats[code_enum->index].mbus_code; + + return 0; +} + +static int sun6i_mipi_csi2_get_fmt(struct v4l2_subdev *subdev, + struct v4l2_subdev_state *state, + struct v4l2_subdev_format *format) +{ + struct sun6i_mipi_csi2_device *csi2_dev = v4l2_get_subdevdata(subdev); + struct v4l2_mbus_framefmt *mbus_format = &format->format; + struct mutex *lock = &csi2_dev->bridge.lock; + + mutex_lock(lock); + + if (format->which == V4L2_SUBDEV_FORMAT_TRY) + *mbus_format = *v4l2_subdev_get_try_format(subdev, state, + format->pad); + else + *mbus_format = csi2_dev->bridge.mbus_format; + + mutex_unlock(lock); + + return 0; +} + +static int sun6i_mipi_csi2_set_fmt(struct v4l2_subdev *subdev, + struct v4l2_subdev_state *state, + struct v4l2_subdev_format *format) +{ + struct sun6i_mipi_csi2_device *csi2_dev = v4l2_get_subdevdata(subdev); + struct v4l2_mbus_framefmt *mbus_format = &format->format; + struct mutex *lock = &csi2_dev->bridge.lock; + + mutex_lock(lock); + + sun6i_mipi_csi2_mbus_format_prepare(mbus_format); + + if (format->which == V4L2_SUBDEV_FORMAT_TRY) + *v4l2_subdev_get_try_format(subdev, state, format->pad) = + *mbus_format; + else + csi2_dev->bridge.mbus_format = *mbus_format; + + mutex_unlock(lock); + + return 0; +} + +static const struct v4l2_subdev_pad_ops sun6i_mipi_csi2_pad_ops = { + .init_cfg = sun6i_mipi_csi2_init_cfg, + .enum_mbus_code = sun6i_mipi_csi2_enum_mbus_code, + .get_fmt = sun6i_mipi_csi2_get_fmt, + .set_fmt = sun6i_mipi_csi2_set_fmt, +}; + +static const struct v4l2_subdev_ops sun6i_mipi_csi2_subdev_ops = { + .video = &sun6i_mipi_csi2_video_ops, + .pad = &sun6i_mipi_csi2_pad_ops, +}; + +/* Media Entity */ + +static const struct media_entity_operations sun6i_mipi_csi2_entity_ops = { + .link_validate = v4l2_subdev_link_validate, +}; + +/* V4L2 Async */ + +static int +sun6i_mipi_csi2_notifier_bound(struct v4l2_async_notifier *notifier, + struct v4l2_subdev *remote_subdev, + struct v4l2_async_subdev *async_subdev) +{ + struct v4l2_subdev *subdev = notifier->sd; + struct sun6i_mipi_csi2_device *csi2_dev = + container_of(notifier, struct sun6i_mipi_csi2_device, + bridge.notifier); + struct media_entity *sink_entity = &subdev->entity; + struct media_entity *source_entity = &remote_subdev->entity; + struct device *dev = csi2_dev->dev; + int sink_pad_index = 0; + int source_pad_index; + int ret; + + ret = media_entity_get_fwnode_pad(source_entity, remote_subdev->fwnode, + MEDIA_PAD_FL_SOURCE); + if (ret < 0) { + dev_err(dev, "missing source pad in external entity %s\n", + source_entity->name); + return -EINVAL; + } + + source_pad_index = ret; + + dev_dbg(dev, "creating %s:%u -> %s:%u link\n", source_entity->name, + source_pad_index, sink_entity->name, sink_pad_index); + + ret = media_create_pad_link(source_entity, source_pad_index, + sink_entity, sink_pad_index, + MEDIA_LNK_FL_ENABLED | + MEDIA_LNK_FL_IMMUTABLE); + if (ret) { + dev_err(dev, "failed to create %s:%u -> %s:%u link\n", + source_entity->name, source_pad_index, + sink_entity->name, sink_pad_index); + return ret; + } + + csi2_dev->bridge.source_subdev = remote_subdev; + + return 0; +} + +static const struct v4l2_async_notifier_operations +sun6i_mipi_csi2_notifier_ops = { + .bound = sun6i_mipi_csi2_notifier_bound, +}; + +/* Bridge */ + +static int +sun6i_mipi_csi2_bridge_source_setup(struct sun6i_mipi_csi2_device *csi2_dev) +{ + struct v4l2_async_notifier *notifier = &csi2_dev->bridge.notifier; + struct v4l2_fwnode_endpoint *endpoint = &csi2_dev->bridge.endpoint; + struct v4l2_async_subdev *subdev_async; + struct fwnode_handle *handle; + struct device *dev = csi2_dev->dev; + int ret; + + handle = fwnode_graph_get_endpoint_by_id(dev_fwnode(dev), 0, 0, + FWNODE_GRAPH_ENDPOINT_NEXT); + if (!handle) + return -ENODEV; + + endpoint->bus_type = V4L2_MBUS_CSI2_DPHY; + + ret = v4l2_fwnode_endpoint_parse(handle, endpoint); + if (ret) + goto complete; + + subdev_async = + v4l2_async_nf_add_fwnode_remote(notifier, handle, + struct v4l2_async_subdev); + if (IS_ERR(subdev_async)) + ret = PTR_ERR(subdev_async); + +complete: + fwnode_handle_put(handle); + + return ret; +} + +static int sun6i_mipi_csi2_bridge_setup(struct sun6i_mipi_csi2_device *csi2_dev) +{ + struct sun6i_mipi_csi2_bridge *bridge = &csi2_dev->bridge; + struct v4l2_subdev *subdev = &bridge->subdev; + struct v4l2_async_notifier *notifier = &bridge->notifier; + struct media_pad *pads = bridge->pads; + struct device *dev = csi2_dev->dev; + int ret; + + mutex_init(&bridge->lock); + + /* V4L2 Subdev */ + + v4l2_subdev_init(subdev, &sun6i_mipi_csi2_subdev_ops); + strscpy(subdev->name, SUN6I_MIPI_CSI2_NAME, sizeof(subdev->name)); + subdev->flags |= V4L2_SUBDEV_FL_HAS_DEVNODE; + subdev->owner = THIS_MODULE; + subdev->dev = dev; + + v4l2_set_subdevdata(subdev, csi2_dev); + + /* Media Entity */ + + subdev->entity.function = MEDIA_ENT_F_VID_IF_BRIDGE; + subdev->entity.ops = &sun6i_mipi_csi2_entity_ops; + + /* Media Pads */ + + pads[SUN6I_MIPI_CSI2_PAD_SINK].flags = MEDIA_PAD_FL_SINK; + pads[SUN6I_MIPI_CSI2_PAD_SOURCE].flags = MEDIA_PAD_FL_SOURCE; + + ret = media_entity_pads_init(&subdev->entity, SUN6I_MIPI_CSI2_PAD_COUNT, + pads); + if (ret) + return ret; + + /* V4L2 Async */ + + v4l2_async_nf_init(notifier); + notifier->ops = &sun6i_mipi_csi2_notifier_ops; + + ret = sun6i_mipi_csi2_bridge_source_setup(csi2_dev); + if (ret) + goto error_v4l2_notifier_cleanup; + + ret = v4l2_async_subdev_nf_register(subdev, notifier); + if (ret < 0) + goto error_v4l2_notifier_cleanup; + + /* V4L2 Subdev */ + + ret = v4l2_async_register_subdev(subdev); + if (ret < 0) + goto error_v4l2_notifier_unregister; + + return 0; + +error_v4l2_notifier_unregister: + v4l2_async_nf_unregister(notifier); + +error_v4l2_notifier_cleanup: + v4l2_async_nf_cleanup(notifier); + + media_entity_cleanup(&subdev->entity); + + return ret; +} + +static void +sun6i_mipi_csi2_bridge_cleanup(struct sun6i_mipi_csi2_device *csi2_dev) +{ + struct v4l2_subdev *subdev = &csi2_dev->bridge.subdev; + struct v4l2_async_notifier *notifier = &csi2_dev->bridge.notifier; + + v4l2_async_unregister_subdev(subdev); + v4l2_async_nf_unregister(notifier); + v4l2_async_nf_cleanup(notifier); + media_entity_cleanup(&subdev->entity); +} + +/* Platform */ + +static int sun6i_mipi_csi2_suspend(struct device *dev) +{ + struct sun6i_mipi_csi2_device *csi2_dev = dev_get_drvdata(dev); + + clk_disable_unprepare(csi2_dev->clock_mod); + reset_control_assert(csi2_dev->reset); + + return 0; +} + +static int sun6i_mipi_csi2_resume(struct device *dev) +{ + struct sun6i_mipi_csi2_device *csi2_dev = dev_get_drvdata(dev); + int ret; + + ret = reset_control_deassert(csi2_dev->reset); + if (ret) { + dev_err(dev, "failed to deassert reset\n"); + return ret; + } + + ret = clk_prepare_enable(csi2_dev->clock_mod); + if (ret) { + dev_err(dev, "failed to enable module clock\n"); + goto error_reset; + } + + return 0; + +error_reset: + reset_control_assert(csi2_dev->reset); + + return ret; +} + +static const struct dev_pm_ops sun6i_mipi_csi2_pm_ops = { + .runtime_suspend = sun6i_mipi_csi2_suspend, + .runtime_resume = sun6i_mipi_csi2_resume, +}; + +static const struct regmap_config sun6i_mipi_csi2_regmap_config = { + .reg_bits = 32, + .reg_stride = 4, + .val_bits = 32, + .max_register = 0x400, +}; + +static int +sun6i_mipi_csi2_resources_setup(struct sun6i_mipi_csi2_device *csi2_dev, + struct platform_device *platform_dev) +{ + struct device *dev = csi2_dev->dev; + void __iomem *io_base; + int ret; + + /* Registers */ + + io_base = devm_platform_ioremap_resource(platform_dev, 0); + if (IS_ERR(io_base)) + return PTR_ERR(io_base); + + csi2_dev->regmap = + devm_regmap_init_mmio_clk(dev, "bus", io_base, + &sun6i_mipi_csi2_regmap_config); + if (IS_ERR(csi2_dev->regmap)) { + dev_err(dev, "failed to init register map\n"); + return PTR_ERR(csi2_dev->regmap); + } + + /* Clock */ + + csi2_dev->clock_mod = devm_clk_get(dev, "mod"); + if (IS_ERR(csi2_dev->clock_mod)) { + dev_err(dev, "failed to acquire mod clock\n"); + return PTR_ERR(csi2_dev->clock_mod); + } + + ret = clk_set_rate_exclusive(csi2_dev->clock_mod, 297000000); + if (ret) { + dev_err(dev, "failed to set mod clock rate\n"); + return ret; + } + + /* Reset */ + + csi2_dev->reset = devm_reset_control_get_shared(dev, NULL); + if (IS_ERR(csi2_dev->reset)) { + dev_err(dev, "failed to get reset controller\n"); + return PTR_ERR(csi2_dev->reset); + } + + /* D-PHY */ + + csi2_dev->dphy = devm_phy_get(dev, "dphy"); + if (IS_ERR(csi2_dev->dphy)) { + dev_err(dev, "failed to get MIPI D-PHY\n"); + return PTR_ERR(csi2_dev->dphy); + } + + ret = phy_init(csi2_dev->dphy); + if (ret) { + dev_err(dev, "failed to initialize MIPI D-PHY\n"); + return ret; + } + + /* Runtime PM */ + + pm_runtime_enable(dev); + + return 0; +} + +static void +sun6i_mipi_csi2_resources_cleanup(struct sun6i_mipi_csi2_device *csi2_dev) +{ + pm_runtime_disable(csi2_dev->dev); + phy_exit(csi2_dev->dphy); + clk_rate_exclusive_put(csi2_dev->clock_mod); +} + +static int sun6i_mipi_csi2_probe(struct platform_device *platform_dev) +{ + struct sun6i_mipi_csi2_device *csi2_dev; + struct device *dev = &platform_dev->dev; + int ret; + + csi2_dev = devm_kzalloc(dev, sizeof(*csi2_dev), GFP_KERNEL); + if (!csi2_dev) + return -ENOMEM; + + csi2_dev->dev = dev; + platform_set_drvdata(platform_dev, csi2_dev); + + ret = sun6i_mipi_csi2_resources_setup(csi2_dev, platform_dev); + if (ret) + return ret; + + ret = sun6i_mipi_csi2_bridge_setup(csi2_dev); + if (ret) + return ret; + + return 0; +} + +static int sun6i_mipi_csi2_remove(struct platform_device *platform_dev) +{ + struct sun6i_mipi_csi2_device *csi2_dev = + platform_get_drvdata(platform_dev); + + sun6i_mipi_csi2_bridge_cleanup(csi2_dev); + sun6i_mipi_csi2_resources_cleanup(csi2_dev); + + return 0; +} + +static const struct of_device_id sun6i_mipi_csi2_of_match[] = { + { .compatible = "allwinner,sun6i-a31-mipi-csi2" }, + {}, +}; +MODULE_DEVICE_TABLE(of, sun6i_mipi_csi2_of_match); + +static struct platform_driver sun6i_mipi_csi2_platform_driver = { + .probe = sun6i_mipi_csi2_probe, + .remove = sun6i_mipi_csi2_remove, + .driver = { + .name = SUN6I_MIPI_CSI2_NAME, + .of_match_table = of_match_ptr(sun6i_mipi_csi2_of_match), + .pm = &sun6i_mipi_csi2_pm_ops, + }, +}; +module_platform_driver(sun6i_mipi_csi2_platform_driver); + +MODULE_DESCRIPTION("Allwinner A31 MIPI CSI-2 Controller Driver"); +MODULE_AUTHOR("Paul Kocialkowski "); +MODULE_LICENSE("GPL"); diff --git a/drivers/media/platform/sunxi/sun6i-mipi-csi2/sun6i_mipi_csi2.h b/drivers/media/platform/sunxi/sun6i-mipi-csi2/sun6i_mipi_csi2.h new file mode 100644 index 000000000000..24b15e34b5e8 --- /dev/null +++ b/drivers/media/platform/sunxi/sun6i-mipi-csi2/sun6i_mipi_csi2.h @@ -0,0 +1,52 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * Copyright 2020-2022 Bootlin + * Author: Paul Kocialkowski + */ + +#ifndef _SUN6I_MIPI_CSI2_H_ +#define _SUN6I_MIPI_CSI2_H_ + +#include +#include +#include +#include +#include + +#define SUN6I_MIPI_CSI2_NAME "sun6i-mipi-csi2" + +enum sun6i_mipi_csi2_pad { + SUN6I_MIPI_CSI2_PAD_SINK = 0, + SUN6I_MIPI_CSI2_PAD_SOURCE = 1, + SUN6I_MIPI_CSI2_PAD_COUNT = 2, +}; + +struct sun6i_mipi_csi2_format { + u32 mbus_code; + u8 data_type; + u32 bpp; +}; + +struct sun6i_mipi_csi2_bridge { + struct v4l2_subdev subdev; + struct media_pad pads[SUN6I_MIPI_CSI2_PAD_COUNT]; + struct v4l2_fwnode_endpoint endpoint; + struct v4l2_async_notifier notifier; + struct v4l2_mbus_framefmt mbus_format; + struct mutex lock; /* Mbus format lock. */ + + struct v4l2_subdev *source_subdev; +}; + +struct sun6i_mipi_csi2_device { + struct device *dev; + + struct regmap *regmap; + struct clk *clock_mod; + struct reset_control *reset; + struct phy *dphy; + + struct sun6i_mipi_csi2_bridge bridge; +}; + +#endif diff --git a/drivers/media/platform/sunxi/sun6i-mipi-csi2/sun6i_mipi_csi2_reg.h b/drivers/media/platform/sunxi/sun6i-mipi-csi2/sun6i_mipi_csi2_reg.h new file mode 100644 index 000000000000..d9c92cf2b038 --- /dev/null +++ b/drivers/media/platform/sunxi/sun6i-mipi-csi2/sun6i_mipi_csi2_reg.h @@ -0,0 +1,76 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * Copyright 2020-2022 Bootlin + * Author: Paul Kocialkowski + */ + +#ifndef _SUN6I_MIPI_CSI2_REG_H_ +#define _SUN6I_MIPI_CSI2_REG_H_ + +#define SUN6I_MIPI_CSI2_CTL_REG 0x0 +#define SUN6I_MIPI_CSI2_CTL_RESET_N BIT(31) +#define SUN6I_MIPI_CSI2_CTL_VERSION_EN BIT(30) +#define SUN6I_MIPI_CSI2_CTL_UNPK_EN BIT(1) +#define SUN6I_MIPI_CSI2_CTL_EN BIT(0) + +#define SUN6I_MIPI_CSI2_CFG_REG 0x4 +#define SUN6I_MIPI_CSI2_CFG_CHANNEL_MODE(v) ((((v) - 1) << 8) & \ + GENMASK(9, 8)) +#define SUN6I_MIPI_CSI2_CFG_LANE_COUNT(v) (((v) - 1) & GENMASK(1, 0)) + +#define SUN6I_MIPI_CSI2_VCDT_RX_REG 0x8 +#define SUN6I_MIPI_CSI2_VCDT_RX_CH_VC(ch, vc) (((vc) & GENMASK(1, 0)) << \ + ((ch) * 8 + 6)) +#define SUN6I_MIPI_CSI2_VCDT_RX_CH_DT(ch, t) (((t) & GENMASK(5, 0)) << \ + ((ch) * 8)) +#define SUN6I_MIPI_CSI2_RX_PKT_NUM_REG 0xc + +#define SUN6I_MIPI_CSI2_VERSION_REG 0x3c + +#define SUN6I_MIPI_CSI2_CH_CFG_REG 0x40 +#define SUN6I_MIPI_CSI2_CH_INT_EN_REG 0x50 +#define SUN6I_MIPI_CSI2_CH_INT_EN_EOT_ERR BIT(29) +#define SUN6I_MIPI_CSI2_CH_INT_EN_CHKSUM_ERR BIT(28) +#define SUN6I_MIPI_CSI2_CH_INT_EN_ECC_WRN BIT(27) +#define SUN6I_MIPI_CSI2_CH_INT_EN_ECC_ERR BIT(26) +#define SUN6I_MIPI_CSI2_CH_INT_EN_LINE_SYNC_ERR BIT(25) +#define SUN6I_MIPI_CSI2_CH_INT_EN_FRAME_SYNC_ERR BIT(24) +#define SUN6I_MIPI_CSI2_CH_INT_EN_EMB_DATA BIT(18) +#define SUN6I_MIPI_CSI2_CH_INT_EN_PF BIT(17) +#define SUN6I_MIPI_CSI2_CH_INT_EN_PH_UPDATE BIT(16) +#define SUN6I_MIPI_CSI2_CH_INT_EN_LINE_START_SYNC BIT(11) +#define SUN6I_MIPI_CSI2_CH_INT_EN_LINE_END_SYNC BIT(10) +#define SUN6I_MIPI_CSI2_CH_INT_EN_FRAME_START_SYNC BIT(9) +#define SUN6I_MIPI_CSI2_CH_INT_EN_FRAME_END_SYNC BIT(8) +#define SUN6I_MIPI_CSI2_CH_INT_EN_FIFO_OVER BIT(0) + +#define SUN6I_MIPI_CSI2_CH_INT_PD_REG 0x58 +#define SUN6I_MIPI_CSI2_CH_INT_PD_CLEAR 0xff +#define SUN6I_MIPI_CSI2_CH_INT_PD_EOT_ERR BIT(29) +#define SUN6I_MIPI_CSI2_CH_INT_PD_CHKSUM_ERR BIT(28) +#define SUN6I_MIPI_CSI2_CH_INT_PD_ECC_WRN BIT(27) +#define SUN6I_MIPI_CSI2_CH_INT_PD_ECC_ERR BIT(26) +#define SUN6I_MIPI_CSI2_CH_INT_PD_LINE_SYNC_ERR BIT(25) +#define SUN6I_MIPI_CSI2_CH_INT_PD_FRAME_SYNC_ERR BIT(24) +#define SUN6I_MIPI_CSI2_CH_INT_PD_EMB_DATA BIT(18) +#define SUN6I_MIPI_CSI2_CH_INT_PD_PF BIT(17) +#define SUN6I_MIPI_CSI2_CH_INT_PD_PH_UPDATE BIT(16) +#define SUN6I_MIPI_CSI2_CH_INT_PD_LINE_START_SYNC BIT(11) +#define SUN6I_MIPI_CSI2_CH_INT_PD_LINE_END_SYNC BIT(10) +#define SUN6I_MIPI_CSI2_CH_INT_PD_FRAME_START_SYNC BIT(9) +#define SUN6I_MIPI_CSI2_CH_INT_PD_FRAME_END_SYNC BIT(8) +#define SUN6I_MIPI_CSI2_CH_INT_PD_FIFO_OVER BIT(0) + +#define SUN6I_MIPI_CSI2_CH_DT_TRIGGER_REG 0x60 +#define SUN6I_MIPI_CSI2_CH_CUR_PH_REG 0x70 +#define SUN6I_MIPI_CSI2_CH_ECC_REG 0x74 +#define SUN6I_MIPI_CSI2_CH_CKS_REG 0x78 +#define SUN6I_MIPI_CSI2_CH_FRAME_NUM_REG 0x7c +#define SUN6I_MIPI_CSI2_CH_LINE_NUM_REG 0x80 + +#define SUN6I_MIPI_CSI2_CH_OFFSET 0x100 + +#define SUN6I_MIPI_CSI2_CH_REG(reg, ch) \ + (SUN6I_MIPI_CSI2_CH_OFFSET * (ch) + (reg)) + +#endif From patchwork Fri Apr 15 15:21:36 2022 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Paul Kocialkowski X-Patchwork-Id: 12815009 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id 12BFBC433F5 for ; Fri, 15 Apr 2022 15:22:15 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1355024AbiDOPYj (ORCPT ); Fri, 15 Apr 2022 11:24:39 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:52346 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1355012AbiDOPYh (ORCPT ); Fri, 15 Apr 2022 11:24:37 -0400 Received: from relay1-d.mail.gandi.net (relay1-d.mail.gandi.net [IPv6:2001:4b98:dc4:8::221]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id C9A5BD0816; Fri, 15 Apr 2022 08:22:05 -0700 (PDT) Received: (Authenticated sender: paul.kocialkowski@bootlin.com) by mail.gandi.net (Postfix) with ESMTPSA id C48F424000B; Fri, 15 Apr 2022 15:22:02 +0000 (UTC) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=bootlin.com; s=gm1; t=1650036124; h=from:from:reply-to:subject:subject:date:date:message-id:message-id: to:to:cc:cc:mime-version:mime-version: content-transfer-encoding:content-transfer-encoding: in-reply-to:in-reply-to:references:references; bh=FK8arK2x+Qxc+gz/abj3rVz/2+9S6LmKDQQzh8/ySlE=; b=mpMfeWAKdMrJ2O+Sogt2d3v3gS75EkjbPRc0zus4d9cTyYO0yzAouD8BoCZaqgEYcUpPYA HRi/fa5MvAKUVKhHZvHvT0AT9npuKfB3+Ax4qBgp+dNzKRQDl6sKgWBVejKqCed5gv5dks bUXAG0vV+/vKxTvRt6wh/hZ8LlZTDDab8BuRt6h8xzub1qA3jSgHiCV+7ImxL4PY/y+UWF E+3eJukkMv02KWqsxugsQ+uGQEaMr8340ruT48YwtMpM/KhSk335YBqJNFycXW4QGGfi0i YQUrwSguWgtWYPi53j6fUMiTsEzo4pwWrjcnKzolt0tpJSt4et6jA2hHJxMtiA== From: Paul Kocialkowski To: linux-media@vger.kernel.org, devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-sunxi@lists.linux.dev, linux-kernel@vger.kernel.org, linux-phy@lists.infradead.org Cc: Yong Deng , Mauro Carvalho Chehab , Rob Herring , Chen-Yu Tsai , Jernej Skrabec , Samuel Holland , Sakari Ailus , Hans Verkuil , Laurent Pinchart , Paul Kocialkowski , Kishon Vijay Abraham I , Vinod Koul , Maxime Ripard , Thomas Petazzoni Subject: [PATCH v4 6/8] MAINTAINERS: Add entry for the Allwinner A31 MIPI CSI-2 bridge driver Date: Fri, 15 Apr 2022 17:21:36 +0200 Message-Id: <20220415152138.635525-7-paul.kocialkowski@bootlin.com> X-Mailer: git-send-email 2.35.2 In-Reply-To: <20220415152138.635525-1-paul.kocialkowski@bootlin.com> References: <20220415152138.635525-1-paul.kocialkowski@bootlin.com> MIME-Version: 1.0 Precedence: bulk List-ID: X-Mailing-List: linux-media@vger.kernel.org Add myself as maintainer of the Allwinner A31 MIPI CSI-2 bridge media driver. Signed-off-by: Paul Kocialkowski Acked-by: Jernej Skrabec --- MAINTAINERS | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/MAINTAINERS b/MAINTAINERS index fd768d43e048..0c7a3c792837 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -761,6 +761,14 @@ T: git git://linuxtv.org/media_tree.git F: Documentation/devicetree/bindings/media/allwinner,sun4i-a10-csi.yaml F: drivers/media/platform/sunxi/sun4i-csi/ +ALLWINNER A31 MIPI CSI-2 BRIDGE DRIVER +M: Paul Kocialkowski +L: linux-media@vger.kernel.org +S: Maintained +T: git git://linuxtv.org/media_tree.git +F: Documentation/devicetree/bindings/media/allwinner,sun6i-a31-mipi-csi2.yaml +F: drivers/media/platform/sunxi/sun6i-mipi-csi2/ + ALLWINNER CPUFREQ DRIVER M: Yangtao Li L: linux-pm@vger.kernel.org From patchwork Fri Apr 15 15:21:37 2022 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Paul Kocialkowski X-Patchwork-Id: 12815010 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id C60CFC4321E for ; Fri, 15 Apr 2022 15:22:15 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1355036AbiDOPYm (ORCPT ); Fri, 15 Apr 2022 11:24:42 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:52352 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1355014AbiDOPYh (ORCPT ); Fri, 15 Apr 2022 11:24:37 -0400 Received: from relay1-d.mail.gandi.net (relay1-d.mail.gandi.net [IPv6:2001:4b98:dc4:8::221]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 28C8AD39B1; Fri, 15 Apr 2022 08:22:07 -0700 (PDT) Received: (Authenticated sender: paul.kocialkowski@bootlin.com) by mail.gandi.net (Postfix) with ESMTPSA id 804D624000F; Fri, 15 Apr 2022 15:22:04 +0000 (UTC) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=bootlin.com; s=gm1; t=1650036126; h=from:from:reply-to:subject:subject:date:date:message-id:message-id: to:to:cc:cc:mime-version:mime-version: content-transfer-encoding:content-transfer-encoding: in-reply-to:in-reply-to:references:references; bh=dpXxGro9NpLI9KH9XpmsU4oUMSnOgnwYOSWdWVkvN9w=; b=Km/EFETbaIM13EBIyWk+ZcoLh6GdSXFVsPpJ/D2VoIAfQuzN/KWo8wuHgdbkbyKWALVMP1 AcDV50/BDB8bG38x6gExogI/7+4B3npWWt3SgQfJnE9IRvnAqDntNbytGn1NKT4u78MLGU NJqeBhePqpUphqzzrEvG6PEs5WMONe5pB+2f0WNx6kjlQHZdQoMe/HMDqZQ+i+vqMHaPi8 HvKFILg/lQIbAdG1dX/EOLvcGWzulzUkq+WX0vlTV2fiCghHy2zdHr1ILV+TNHgVZQ6wxB 0YlFVYqFM7rwlZMJmvTZ+vyjOy/Yo0jatqwKQ3UnsdGMqo6uyVeVZ6/kMixStQ== From: Paul Kocialkowski To: linux-media@vger.kernel.org, devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-sunxi@lists.linux.dev, linux-kernel@vger.kernel.org, linux-phy@lists.infradead.org Cc: Yong Deng , Mauro Carvalho Chehab , Rob Herring , Chen-Yu Tsai , Jernej Skrabec , Samuel Holland , Sakari Ailus , Hans Verkuil , Laurent Pinchart , Paul Kocialkowski , Kishon Vijay Abraham I , Vinod Koul , Maxime Ripard , Thomas Petazzoni , Rob Herring Subject: [PATCH v4 7/8] dt-bindings: media: Add Allwinner A83T MIPI CSI-2 bindings documentation Date: Fri, 15 Apr 2022 17:21:37 +0200 Message-Id: <20220415152138.635525-8-paul.kocialkowski@bootlin.com> X-Mailer: git-send-email 2.35.2 In-Reply-To: <20220415152138.635525-1-paul.kocialkowski@bootlin.com> References: <20220415152138.635525-1-paul.kocialkowski@bootlin.com> MIME-Version: 1.0 Precedence: bulk List-ID: X-Mailing-List: linux-media@vger.kernel.org This introduces YAML bindings documentation for the Allwinner A83T MIPI CSI-2 controller. Signed-off-by: Paul Kocialkowski Reviewed-by: Rob Herring --- .../media/allwinner,sun8i-a83t-mipi-csi2.yaml | 135 ++++++++++++++++++ 1 file changed, 135 insertions(+) create mode 100644 Documentation/devicetree/bindings/media/allwinner,sun8i-a83t-mipi-csi2.yaml diff --git a/Documentation/devicetree/bindings/media/allwinner,sun8i-a83t-mipi-csi2.yaml b/Documentation/devicetree/bindings/media/allwinner,sun8i-a83t-mipi-csi2.yaml new file mode 100644 index 000000000000..d40ff63178ea --- /dev/null +++ b/Documentation/devicetree/bindings/media/allwinner,sun8i-a83t-mipi-csi2.yaml @@ -0,0 +1,135 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/allwinner,sun8i-a83t-mipi-csi2.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Allwinner A83T MIPI CSI-2 Device Tree Bindings + +maintainers: + - Paul Kocialkowski + +properties: + compatible: + const: allwinner,sun8i-a83t-mipi-csi2 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + items: + - description: Bus Clock + - description: Module Clock + - description: MIPI-specific Clock + - description: Misc CSI Clock + + clock-names: + items: + - const: bus + - const: mod + - const: mipi + - const: misc + + resets: + maxItems: 1 + + ports: + $ref: /schemas/graph.yaml#/properties/ports + + properties: + port@0: + $ref: /schemas/graph.yaml#/$defs/port-base + description: Input port, connect to a MIPI CSI-2 sensor + + properties: + reg: + const: 0 + + endpoint: + $ref: video-interfaces.yaml# + unevaluatedProperties: false + + properties: + data-lanes: + minItems: 1 + maxItems: 4 + + required: + - data-lanes + + additionalProperties: false + + port@1: + $ref: /schemas/graph.yaml#/$defs/port-base + description: Output port, connect to a CSI controller + + properties: + reg: + const: 1 + + endpoint: + $ref: /schemas/graph.yaml#/$defs/endpoint-base + unevaluatedProperties: false + + additionalProperties: false + + required: + - port@0 + - port@1 + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + - resets + - ports + +additionalProperties: false + +examples: + - | + #include + #include + #include + + mipi_csi2: csi@1cb1000 { + compatible = "allwinner,sun8i-a83t-mipi-csi2"; + reg = <0x01cb1000 0x1000>; + interrupts = ; + clocks = <&ccu CLK_BUS_CSI>, + <&ccu CLK_CSI_SCLK>, + <&ccu CLK_MIPI_CSI>, + <&ccu CLK_CSI_MISC>; + clock-names = "bus", "mod", "mipi", "misc"; + resets = <&ccu RST_BUS_CSI>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + mipi_csi2_in: port@0 { + reg = <0>; + + mipi_csi2_in_ov8865: endpoint { + data-lanes = <1 2 3 4>; + + remote-endpoint = <&ov8865_out_mipi_csi2>; + }; + }; + + mipi_csi2_out: port@1 { + reg = <1>; + + mipi_csi2_out_csi: endpoint { + remote-endpoint = <&csi_in_mipi_csi2>; + }; + }; + }; + }; + +... From patchwork Fri Apr 15 15:21:38 2022 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 8bit X-Patchwork-Submitter: Paul Kocialkowski X-Patchwork-Id: 12815012 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id 57014C433FE for ; Fri, 15 Apr 2022 15:22:41 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1355050AbiDOPZI (ORCPT ); Fri, 15 Apr 2022 11:25:08 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:52396 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1355032AbiDOPYk (ORCPT ); Fri, 15 Apr 2022 11:24:40 -0400 Received: from relay1-d.mail.gandi.net (relay1-d.mail.gandi.net [IPv6:2001:4b98:dc4:8::221]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id BB016D3998; Fri, 15 Apr 2022 08:22:09 -0700 (PDT) Received: (Authenticated sender: paul.kocialkowski@bootlin.com) by mail.gandi.net (Postfix) with ESMTPSA id 88367240002; Fri, 15 Apr 2022 15:22:06 +0000 (UTC) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=bootlin.com; s=gm1; t=1650036128; h=from:from:reply-to:subject:subject:date:date:message-id:message-id: to:to:cc:cc:mime-version:mime-version:content-type:content-type: content-transfer-encoding:content-transfer-encoding: in-reply-to:in-reply-to:references:references; bh=0fuDHgA3mbpTL1SNLMm3SZEcqFFO4pb5xcDcwqUU++E=; b=BV1KPVA80mHNsaxWHtaK+Ol/2FaAG56nDgN60eYYFBhwo0VyorDitH2HBgxrJqSR6tey8S JwKisD3enlW1RXLfTPpqhxQKBTf4vb4QhfSVfxngFr3Hl39h674UURLM5mco+qf+FOfc73 ajYYVgByep7AHJ7y4bUHTPKsZZyE9HZxnVdK4kTOKQIqyPBt+8wqnLTAKlBIDpeJL4dfja kMofU+PtB9oBSaBCODPmtPMSOUerwdbun5MC037Aac+v+9fW4Wwc8wNIr5z4CdvwnQqV7T e22yAwpJJ7lJwuheQU+xOxyzrqQ6pURb8EGlW/EdwksI+uc++qoAUXT/1mbVGQ== From: Paul Kocialkowski To: linux-media@vger.kernel.org, devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-sunxi@lists.linux.dev, linux-kernel@vger.kernel.org, linux-phy@lists.infradead.org Cc: Yong Deng , Mauro Carvalho Chehab , Rob Herring , Chen-Yu Tsai , Jernej Skrabec , Samuel Holland , Sakari Ailus , Hans Verkuil , Laurent Pinchart , Paul Kocialkowski , Kishon Vijay Abraham I , Vinod Koul , Maxime Ripard , Thomas Petazzoni Subject: [PATCH v4 8/8] media: sunxi: Add support for the A83T MIPI CSI-2 controller Date: Fri, 15 Apr 2022 17:21:38 +0200 Message-Id: <20220415152138.635525-9-paul.kocialkowski@bootlin.com> X-Mailer: git-send-email 2.35.2 In-Reply-To: <20220415152138.635525-1-paul.kocialkowski@bootlin.com> References: <20220415152138.635525-1-paul.kocialkowski@bootlin.com> MIME-Version: 1.0 Precedence: bulk List-ID: X-Mailing-List: linux-media@vger.kernel.org The A83T supports MIPI CSI-2 with a composite controller, covering both the protocol logic and the D-PHY implementation. This controller seems to be found on the A83T only and probably was abandoned since. This implementation splits the protocol and D-PHY registers and uses the PHY framework internally. The D-PHY is not registered as a standalone PHY driver since it cannot be used with any other controller. There are a few notable points about the controller: - The initialisation sequence involes writing specific magic init values that do not seem to make any particular sense given the concerned register fields; - Interrupts appear to be hitting regardless of the interrupt mask registers, which can cause a serious flood when transmission errors occur. Only 8-bit and 10-bit Bayer formats are currently supported. While up to 4 internal channels to the CSI controller exist, only one is currently supported by this implementation. This work is based on the first version of the driver submitted by Kévin L'hôpital, which was adapted to mainline from the Allwinner BSP. This version integrates MIPI CSI-2 support as a standalone V4L2 subdev instead of merging it in the sun6i-csi driver. It was tested on a Banana Pi M3 board with an OV8865 sensor in a 4-lane configuration. Signed-off-by: Paul Kocialkowski Acked-by: Maxime Ripard --- drivers/media/platform/sunxi/Kconfig | 1 + drivers/media/platform/sunxi/Makefile | 1 + .../sunxi/sun8i-a83t-mipi-csi2/Kconfig | 12 + .../sunxi/sun8i-a83t-mipi-csi2/Makefile | 4 + .../sun8i-a83t-mipi-csi2/sun8i_a83t_dphy.c | 72 ++ .../sun8i-a83t-mipi-csi2/sun8i_a83t_dphy.h | 39 + .../sun8i_a83t_mipi_csi2.c | 815 ++++++++++++++++++ .../sun8i_a83t_mipi_csi2.h | 55 ++ .../sun8i_a83t_mipi_csi2_reg.h | 151 ++++ 9 files changed, 1150 insertions(+) create mode 100644 drivers/media/platform/sunxi/sun8i-a83t-mipi-csi2/Kconfig create mode 100644 drivers/media/platform/sunxi/sun8i-a83t-mipi-csi2/Makefile create mode 100644 drivers/media/platform/sunxi/sun8i-a83t-mipi-csi2/sun8i_a83t_dphy.c create mode 100644 drivers/media/platform/sunxi/sun8i-a83t-mipi-csi2/sun8i_a83t_dphy.h create mode 100644 drivers/media/platform/sunxi/sun8i-a83t-mipi-csi2/sun8i_a83t_mipi_csi2.c create mode 100644 drivers/media/platform/sunxi/sun8i-a83t-mipi-csi2/sun8i_a83t_mipi_csi2.h create mode 100644 drivers/media/platform/sunxi/sun8i-a83t-mipi-csi2/sun8i_a83t_mipi_csi2_reg.h diff --git a/drivers/media/platform/sunxi/Kconfig b/drivers/media/platform/sunxi/Kconfig index d33dce2e444b..2dd15083a1d9 100644 --- a/drivers/media/platform/sunxi/Kconfig +++ b/drivers/media/platform/sunxi/Kconfig @@ -5,5 +5,6 @@ comment "Sunxi media platform drivers" source "drivers/media/platform/sunxi/sun4i-csi/Kconfig" source "drivers/media/platform/sunxi/sun6i-csi/Kconfig" source "drivers/media/platform/sunxi/sun6i-mipi-csi2/Kconfig" +source "drivers/media/platform/sunxi/sun8i-a83t-mipi-csi2/Kconfig" source "drivers/media/platform/sunxi/sun8i-di/Kconfig" source "drivers/media/platform/sunxi/sun8i-rotate/Kconfig" diff --git a/drivers/media/platform/sunxi/Makefile b/drivers/media/platform/sunxi/Makefile index 887a7cae8fca..9aa01cb01883 100644 --- a/drivers/media/platform/sunxi/Makefile +++ b/drivers/media/platform/sunxi/Makefile @@ -3,5 +3,6 @@ obj-y += sun4i-csi/ obj-y += sun6i-csi/ obj-y += sun6i-mipi-csi2/ +obj-y += sun8i-a83t-mipi-csi2/ obj-y += sun8i-di/ obj-y += sun8i-rotate/ diff --git a/drivers/media/platform/sunxi/sun8i-a83t-mipi-csi2/Kconfig b/drivers/media/platform/sunxi/sun8i-a83t-mipi-csi2/Kconfig new file mode 100644 index 000000000000..5854f8388c92 --- /dev/null +++ b/drivers/media/platform/sunxi/sun8i-a83t-mipi-csi2/Kconfig @@ -0,0 +1,12 @@ +# SPDX-License-Identifier: GPL-2.0-only +config VIDEO_SUN8I_A83T_MIPI_CSI2 + tristate "Allwinner A83T MIPI CSI-2 Controller and D-PHY Driver" + depends on V4L_PLATFORM_DRIVERS && VIDEO_DEV + depends on ARCH_SUNXI || COMPILE_TEST + depends on PM && COMMON_CLK + select MEDIA_CONTROLLER + select VIDEO_V4L2_SUBDEV_API + select V4L2_FWNODE + select REGMAP_MMIO + help + Support for the Allwinner A83T MIPI CSI-2 controller and D-PHY. diff --git a/drivers/media/platform/sunxi/sun8i-a83t-mipi-csi2/Makefile b/drivers/media/platform/sunxi/sun8i-a83t-mipi-csi2/Makefile new file mode 100644 index 000000000000..1427d15a879a --- /dev/null +++ b/drivers/media/platform/sunxi/sun8i-a83t-mipi-csi2/Makefile @@ -0,0 +1,4 @@ +# SPDX-License-Identifier: GPL-2.0-only +sun8i-a83t-mipi-csi2-y += sun8i_a83t_mipi_csi2.o sun8i_a83t_dphy.o + +obj-$(CONFIG_VIDEO_SUN8I_A83T_MIPI_CSI2) += sun8i-a83t-mipi-csi2.o diff --git a/drivers/media/platform/sunxi/sun8i-a83t-mipi-csi2/sun8i_a83t_dphy.c b/drivers/media/platform/sunxi/sun8i-a83t-mipi-csi2/sun8i_a83t_dphy.c new file mode 100644 index 000000000000..24bbcc85013d --- /dev/null +++ b/drivers/media/platform/sunxi/sun8i-a83t-mipi-csi2/sun8i_a83t_dphy.c @@ -0,0 +1,72 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright 2020-2022 Bootlin + * Author: Paul Kocialkowski + */ + +#include +#include + +#include "sun8i_a83t_dphy.h" +#include "sun8i_a83t_mipi_csi2.h" + +static int sun8i_a83t_dphy_configure(struct phy *dphy, + union phy_configure_opts *opts) +{ + return phy_mipi_dphy_config_validate(&opts->mipi_dphy); +} + +static int sun8i_a83t_dphy_power_on(struct phy *dphy) +{ + struct sun8i_a83t_mipi_csi2_device *csi2_dev = phy_get_drvdata(dphy); + struct regmap *regmap = csi2_dev->regmap; + + regmap_write(regmap, SUN8I_A83T_DPHY_CTRL_REG, + SUN8I_A83T_DPHY_CTRL_RESET_N | + SUN8I_A83T_DPHY_CTRL_SHUTDOWN_N); + + regmap_write(regmap, SUN8I_A83T_DPHY_ANA0_REG, + SUN8I_A83T_DPHY_ANA0_REXT_EN | + SUN8I_A83T_DPHY_ANA0_RINT(2) | + SUN8I_A83T_DPHY_ANA0_SNK(2)); + + return 0; +}; + +static int sun8i_a83t_dphy_power_off(struct phy *dphy) +{ + struct sun8i_a83t_mipi_csi2_device *csi2_dev = phy_get_drvdata(dphy); + struct regmap *regmap = csi2_dev->regmap; + + regmap_write(regmap, SUN8I_A83T_DPHY_CTRL_REG, 0); + + return 0; +}; + +static const struct phy_ops sun8i_a83t_dphy_ops = { + .configure = sun8i_a83t_dphy_configure, + .power_on = sun8i_a83t_dphy_power_on, + .power_off = sun8i_a83t_dphy_power_off, +}; + +int sun8i_a83t_dphy_register(struct sun8i_a83t_mipi_csi2_device *csi2_dev) +{ + struct device *dev = csi2_dev->dev; + struct phy_provider *phy_provider; + + csi2_dev->dphy = devm_phy_create(dev, NULL, &sun8i_a83t_dphy_ops); + if (IS_ERR(csi2_dev->dphy)) { + dev_err(dev, "failed to create D-PHY\n"); + return PTR_ERR(csi2_dev->dphy); + } + + phy_set_drvdata(csi2_dev->dphy, csi2_dev); + + phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate); + if (IS_ERR(phy_provider)) { + dev_err(dev, "failed to register D-PHY provider\n"); + return PTR_ERR(phy_provider); + } + + return 0; +} diff --git a/drivers/media/platform/sunxi/sun8i-a83t-mipi-csi2/sun8i_a83t_dphy.h b/drivers/media/platform/sunxi/sun8i-a83t-mipi-csi2/sun8i_a83t_dphy.h new file mode 100644 index 000000000000..9ab709060770 --- /dev/null +++ b/drivers/media/platform/sunxi/sun8i-a83t-mipi-csi2/sun8i_a83t_dphy.h @@ -0,0 +1,39 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * Copyright 2020 Kévin L'hôpital + * Copyright 2020-2022 Bootlin + * Author: Paul Kocialkowski + */ + +#ifndef _SUN8I_A83T_DPHY_H_ +#define _SUN8I_A83T_DPHY_H_ + +#include "sun8i_a83t_mipi_csi2.h" + +#define SUN8I_A83T_DPHY_CTRL_REG 0x10 +#define SUN8I_A83T_DPHY_CTRL_INIT_VALUE 0xb8df698e +#define SUN8I_A83T_DPHY_CTRL_RESET_N BIT(31) +#define SUN8I_A83T_DPHY_CTRL_SHUTDOWN_N BIT(15) +#define SUN8I_A83T_DPHY_CTRL_DEBUG BIT(8) +#define SUN8I_A83T_DPHY_STATUS_REG 0x14 +#define SUN8I_A83T_DPHY_STATUS_CLK_STOP BIT(10) +#define SUN8I_A83T_DPHY_STATUS_CLK_ULPS BIT(9) +#define SUN8I_A83T_DPHY_STATUS_HSCLK BIT(8) +#define SUN8I_A83T_DPHY_STATUS_D3_STOP BIT(7) +#define SUN8I_A83T_DPHY_STATUS_D2_STOP BIT(6) +#define SUN8I_A83T_DPHY_STATUS_D1_STOP BIT(5) +#define SUN8I_A83T_DPHY_STATUS_D0_STOP BIT(4) +#define SUN8I_A83T_DPHY_STATUS_D3_ULPS BIT(3) +#define SUN8I_A83T_DPHY_STATUS_D2_ULPS BIT(2) +#define SUN8I_A83T_DPHY_STATUS_D1_ULPS BIT(1) +#define SUN8I_A83T_DPHY_STATUS_D0_ULPS BIT(0) + +#define SUN8I_A83T_DPHY_ANA0_REG 0x30 +#define SUN8I_A83T_DPHY_ANA0_REXT_EN BIT(31) +#define SUN8I_A83T_DPHY_ANA0_REXT BIT(30) +#define SUN8I_A83T_DPHY_ANA0_RINT(v) (((v) << 28) & GENMASK(29, 28)) +#define SUN8I_A83T_DPHY_ANA0_SNK(v) (((v) << 20) & GENMASK(22, 20)) + +int sun8i_a83t_dphy_register(struct sun8i_a83t_mipi_csi2_device *csi2_dev); + +#endif diff --git a/drivers/media/platform/sunxi/sun8i-a83t-mipi-csi2/sun8i_a83t_mipi_csi2.c b/drivers/media/platform/sunxi/sun8i-a83t-mipi-csi2/sun8i_a83t_mipi_csi2.c new file mode 100644 index 000000000000..c82ede3ca0ff --- /dev/null +++ b/drivers/media/platform/sunxi/sun8i-a83t-mipi-csi2/sun8i_a83t_mipi_csi2.c @@ -0,0 +1,815 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright 2020 Kévin L'hôpital + * Copyright 2020-2022 Bootlin + * Author: Paul Kocialkowski + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "sun8i_a83t_dphy.h" +#include "sun8i_a83t_mipi_csi2.h" +#include "sun8i_a83t_mipi_csi2_reg.h" + +/* Format */ + +static const struct sun8i_a83t_mipi_csi2_format +sun8i_a83t_mipi_csi2_formats[] = { + { + .mbus_code = MEDIA_BUS_FMT_SBGGR8_1X8, + .data_type = MIPI_CSI2_DT_RAW8, + .bpp = 8, + }, + { + .mbus_code = MEDIA_BUS_FMT_SGBRG8_1X8, + .data_type = MIPI_CSI2_DT_RAW8, + .bpp = 8, + }, + { + .mbus_code = MEDIA_BUS_FMT_SGRBG8_1X8, + .data_type = MIPI_CSI2_DT_RAW8, + .bpp = 8, + }, + { + .mbus_code = MEDIA_BUS_FMT_SRGGB8_1X8, + .data_type = MIPI_CSI2_DT_RAW8, + .bpp = 8, + }, + { + .mbus_code = MEDIA_BUS_FMT_SBGGR10_1X10, + .data_type = MIPI_CSI2_DT_RAW10, + .bpp = 10, + }, + { + .mbus_code = MEDIA_BUS_FMT_SGBRG10_1X10, + .data_type = MIPI_CSI2_DT_RAW10, + .bpp = 10, + }, + { + .mbus_code = MEDIA_BUS_FMT_SGRBG10_1X10, + .data_type = MIPI_CSI2_DT_RAW10, + .bpp = 10, + }, + { + .mbus_code = MEDIA_BUS_FMT_SRGGB10_1X10, + .data_type = MIPI_CSI2_DT_RAW10, + .bpp = 10, + }, +}; + +static const struct sun8i_a83t_mipi_csi2_format * +sun8i_a83t_mipi_csi2_format_find(u32 mbus_code) +{ + unsigned int i; + + for (i = 0; i < ARRAY_SIZE(sun8i_a83t_mipi_csi2_formats); i++) + if (sun8i_a83t_mipi_csi2_formats[i].mbus_code == mbus_code) + return &sun8i_a83t_mipi_csi2_formats[i]; + + return NULL; +} + +/* Controller */ + +static void +sun8i_a83t_mipi_csi2_init(struct sun8i_a83t_mipi_csi2_device *csi2_dev) +{ + struct regmap *regmap = csi2_dev->regmap; + + /* + * The Allwinner BSP sets various magic values on a bunch of registers. + * This is apparently a necessary initialization process that will cause + * the capture to fail with unsolicited interrupts hitting if skipped. + * + * Most of the registers are set to proper values later, except for the + * two reserved registers. They are said to hold a "hardware lock" + * value, without more information available. + */ + + regmap_write(regmap, SUN8I_A83T_MIPI_CSI2_CTRL_REG, 0); + regmap_write(regmap, SUN8I_A83T_MIPI_CSI2_CTRL_REG, + SUN8I_A83T_MIPI_CSI2_CTRL_INIT_VALUE); + + regmap_write(regmap, SUN8I_A83T_MIPI_CSI2_RX_PKT_NUM_REG, 0); + regmap_write(regmap, SUN8I_A83T_MIPI_CSI2_RX_PKT_NUM_REG, + SUN8I_A83T_MIPI_CSI2_RX_PKT_NUM_INIT_VALUE); + + regmap_write(regmap, SUN8I_A83T_DPHY_CTRL_REG, 0); + regmap_write(regmap, SUN8I_A83T_DPHY_CTRL_REG, + SUN8I_A83T_DPHY_CTRL_INIT_VALUE); + + regmap_write(regmap, SUN8I_A83T_MIPI_CSI2_RSVD1_REG, 0); + regmap_write(regmap, SUN8I_A83T_MIPI_CSI2_RSVD1_REG, + SUN8I_A83T_MIPI_CSI2_RSVD1_HW_LOCK_VALUE); + + regmap_write(regmap, SUN8I_A83T_MIPI_CSI2_RSVD2_REG, 0); + regmap_write(regmap, SUN8I_A83T_MIPI_CSI2_RSVD2_REG, + SUN8I_A83T_MIPI_CSI2_RSVD2_HW_LOCK_VALUE); + + regmap_write(regmap, SUN8I_A83T_MIPI_CSI2_CFG_REG, 0); + regmap_write(regmap, SUN8I_A83T_MIPI_CSI2_CFG_REG, + SUN8I_A83T_MIPI_CSI2_CFG_INIT_VALUE); +} + +static void +sun8i_a83t_mipi_csi2_enable(struct sun8i_a83t_mipi_csi2_device *csi2_dev) +{ + struct regmap *regmap = csi2_dev->regmap; + + regmap_update_bits(regmap, SUN8I_A83T_MIPI_CSI2_CFG_REG, + SUN8I_A83T_MIPI_CSI2_CFG_SYNC_EN, + SUN8I_A83T_MIPI_CSI2_CFG_SYNC_EN); +} + +static void +sun8i_a83t_mipi_csi2_disable(struct sun8i_a83t_mipi_csi2_device *csi2_dev) +{ + struct regmap *regmap = csi2_dev->regmap; + + regmap_update_bits(regmap, SUN8I_A83T_MIPI_CSI2_CFG_REG, + SUN8I_A83T_MIPI_CSI2_CFG_SYNC_EN, 0); + + regmap_write(regmap, SUN8I_A83T_MIPI_CSI2_CTRL_REG, 0); +} + +static void +sun8i_a83t_mipi_csi2_configure(struct sun8i_a83t_mipi_csi2_device *csi2_dev) +{ + struct regmap *regmap = csi2_dev->regmap; + unsigned int lanes_count = + csi2_dev->bridge.endpoint.bus.mipi_csi2.num_data_lanes; + struct v4l2_mbus_framefmt *mbus_format = &csi2_dev->bridge.mbus_format; + const struct sun8i_a83t_mipi_csi2_format *format; + struct device *dev = csi2_dev->dev; + u32 version = 0; + + format = sun8i_a83t_mipi_csi2_format_find(mbus_format->code); + if (WARN_ON(!format)) + return; + + regmap_write(regmap, SUN8I_A83T_MIPI_CSI2_CTRL_REG, + SUN8I_A83T_MIPI_CSI2_CTRL_RESET_N); + + regmap_read(regmap, SUN8I_A83T_MIPI_CSI2_VERSION_REG, &version); + + dev_dbg(dev, "A83T MIPI CSI-2 version: %04x\n", version); + + regmap_write(regmap, SUN8I_A83T_MIPI_CSI2_CFG_REG, + SUN8I_A83T_MIPI_CSI2_CFG_UNPKT_EN | + SUN8I_A83T_MIPI_CSI2_CFG_SYNC_DLY_CYCLE(8) | + SUN8I_A83T_MIPI_CSI2_CFG_N_CHANNEL(1) | + SUN8I_A83T_MIPI_CSI2_CFG_N_LANE(lanes_count)); + + /* + * Only a single virtual channel (index 0) is currently supported. + * While the registers do mention multiple physical channels being + * available (which can be configured to match a specific virtual + * channel or data type), it's unclear whether channels > 0 are actually + * connected and available and the reference source code only makes use + * of channel 0. + * + * Using extra channels would also require matching channels to be + * available on the CSI (and ISP) side, which is also unsure although + * some CSI implementations are said to support multiple channels for + * BT656 time-sharing. + * + * We still configure virtual channel numbers to ensure that virtual + * channel 0 only goes to channel 0. + */ + + regmap_write(regmap, SUN8I_A83T_MIPI_CSI2_VCDT0_REG, + SUN8I_A83T_MIPI_CSI2_VCDT0_CH_VC(3, 3) | + SUN8I_A83T_MIPI_CSI2_VCDT0_CH_VC(2, 2) | + SUN8I_A83T_MIPI_CSI2_VCDT0_CH_VC(1, 1) | + SUN8I_A83T_MIPI_CSI2_VCDT0_CH_VC(0, 0) | + SUN8I_A83T_MIPI_CSI2_VCDT0_CH_DT(0, format->data_type)); +} + +/* V4L2 Subdev */ + +static int sun8i_a83t_mipi_csi2_s_stream(struct v4l2_subdev *subdev, int on) +{ + struct sun8i_a83t_mipi_csi2_device *csi2_dev = + v4l2_get_subdevdata(subdev); + struct v4l2_subdev *source_subdev = csi2_dev->bridge.source_subdev; + union phy_configure_opts dphy_opts = { 0 }; + struct phy_configure_opts_mipi_dphy *dphy_cfg = &dphy_opts.mipi_dphy; + struct v4l2_mbus_framefmt *mbus_format = &csi2_dev->bridge.mbus_format; + const struct sun8i_a83t_mipi_csi2_format *format; + struct phy *dphy = csi2_dev->dphy; + struct device *dev = csi2_dev->dev; + struct v4l2_ctrl *ctrl; + unsigned int lanes_count = + csi2_dev->bridge.endpoint.bus.mipi_csi2.num_data_lanes; + unsigned long pixel_rate; + /* Initialize to 0 to use both in disable label (ret != 0) and off. */ + int ret = 0; + + if (!source_subdev) + return -ENODEV; + + if (!on) { + v4l2_subdev_call(source_subdev, video, s_stream, 0); + goto disable; + } + + /* Runtime PM */ + + ret = pm_runtime_resume_and_get(dev); + if (ret < 0) + return ret; + + /* Sensor pixel rate */ + + ctrl = v4l2_ctrl_find(source_subdev->ctrl_handler, V4L2_CID_PIXEL_RATE); + if (!ctrl) { + dev_err(dev, "missing sensor pixel rate\n"); + ret = -ENODEV; + goto error_pm; + } + + pixel_rate = (unsigned long)v4l2_ctrl_g_ctrl_int64(ctrl); + if (!pixel_rate) { + dev_err(dev, "missing (zero) sensor pixel rate\n"); + ret = -ENODEV; + goto error_pm; + } + + /* D-PHY */ + + if (!lanes_count) { + dev_err(dev, "missing (zero) MIPI CSI-2 lanes count\n"); + ret = -ENODEV; + goto error_pm; + } + + format = sun8i_a83t_mipi_csi2_format_find(mbus_format->code); + if (WARN_ON(!format)) { + ret = -ENODEV; + goto error_pm; + } + + phy_mipi_dphy_get_default_config(pixel_rate, format->bpp, lanes_count, + dphy_cfg); + + /* + * Note that our hardware is using DDR, which is not taken in account by + * phy_mipi_dphy_get_default_config when calculating hs_clk_rate from + * the pixel rate, lanes count and bpp. + * + * The resulting clock rate is basically the symbol rate over the whole + * link. The actual clock rate is calculated with division by two since + * DDR samples both on rising and falling edges. + */ + + dev_dbg(dev, "A83T MIPI CSI-2 config:\n"); + dev_dbg(dev, "%ld pixels/s, %u bits/pixel, %u lanes, %lu Hz clock\n", + pixel_rate, format->bpp, lanes_count, + dphy_cfg->hs_clk_rate / 2); + + ret = phy_reset(dphy); + if (ret) { + dev_err(dev, "failed to reset MIPI D-PHY\n"); + goto error_pm; + } + + ret = phy_configure(dphy, &dphy_opts); + if (ret) { + dev_err(dev, "failed to configure MIPI D-PHY\n"); + goto error_pm; + } + + /* Controller */ + + sun8i_a83t_mipi_csi2_configure(csi2_dev); + sun8i_a83t_mipi_csi2_enable(csi2_dev); + + /* D-PHY */ + + ret = phy_power_on(dphy); + if (ret) { + dev_err(dev, "failed to power on MIPI D-PHY\n"); + goto error_pm; + } + + /* Source */ + + ret = v4l2_subdev_call(source_subdev, video, s_stream, 1); + if (ret && ret != -ENOIOCTLCMD) + goto disable; + + return 0; + +disable: + phy_power_off(dphy); + sun8i_a83t_mipi_csi2_disable(csi2_dev); + +error_pm: + pm_runtime_put(dev); + + return ret; +} + +static const struct v4l2_subdev_video_ops +sun8i_a83t_mipi_csi2_video_ops = { + .s_stream = sun8i_a83t_mipi_csi2_s_stream, +}; + +static void +sun8i_a83t_mipi_csi2_mbus_format_prepare(struct v4l2_mbus_framefmt *mbus_format) +{ + if (!sun8i_a83t_mipi_csi2_format_find(mbus_format->code)) + mbus_format->code = sun8i_a83t_mipi_csi2_formats[0].mbus_code; + + mbus_format->field = V4L2_FIELD_NONE; + mbus_format->colorspace = V4L2_COLORSPACE_RAW; + mbus_format->quantization = V4L2_QUANTIZATION_DEFAULT; + mbus_format->xfer_func = V4L2_XFER_FUNC_DEFAULT; +} + +static int sun8i_a83t_mipi_csi2_init_cfg(struct v4l2_subdev *subdev, + struct v4l2_subdev_state *state) +{ + struct sun8i_a83t_mipi_csi2_device *csi2_dev = + v4l2_get_subdevdata(subdev); + unsigned int pad = SUN8I_A83T_MIPI_CSI2_PAD_SINK; + struct v4l2_mbus_framefmt *mbus_format = + v4l2_subdev_get_try_format(subdev, state, pad); + struct mutex *lock = &csi2_dev->bridge.lock; + + mutex_lock(lock); + + mbus_format->code = sun8i_a83t_mipi_csi2_formats[0].mbus_code; + mbus_format->width = 640; + mbus_format->height = 480; + + sun8i_a83t_mipi_csi2_mbus_format_prepare(mbus_format); + + mutex_unlock(lock); + + return 0; +} + +static int +sun8i_a83t_mipi_csi2_enum_mbus_code(struct v4l2_subdev *subdev, + struct v4l2_subdev_state *state, + struct v4l2_subdev_mbus_code_enum *code_enum) +{ + if (code_enum->index >= ARRAY_SIZE(sun8i_a83t_mipi_csi2_formats)) + return -EINVAL; + + code_enum->code = + sun8i_a83t_mipi_csi2_formats[code_enum->index].mbus_code; + + return 0; +} + +static int sun8i_a83t_mipi_csi2_get_fmt(struct v4l2_subdev *subdev, + struct v4l2_subdev_state *state, + struct v4l2_subdev_format *format) +{ + struct sun8i_a83t_mipi_csi2_device *csi2_dev = + v4l2_get_subdevdata(subdev); + struct v4l2_mbus_framefmt *mbus_format = &format->format; + struct mutex *lock = &csi2_dev->bridge.lock; + + mutex_lock(lock); + + if (format->which == V4L2_SUBDEV_FORMAT_TRY) + *mbus_format = *v4l2_subdev_get_try_format(subdev, state, + format->pad); + else + *mbus_format = csi2_dev->bridge.mbus_format; + + mutex_unlock(lock); + + return 0; +} + +static int sun8i_a83t_mipi_csi2_set_fmt(struct v4l2_subdev *subdev, + struct v4l2_subdev_state *state, + struct v4l2_subdev_format *format) +{ + struct sun8i_a83t_mipi_csi2_device *csi2_dev = + v4l2_get_subdevdata(subdev); + struct v4l2_mbus_framefmt *mbus_format = &format->format; + struct mutex *lock = &csi2_dev->bridge.lock; + + mutex_lock(lock); + + sun8i_a83t_mipi_csi2_mbus_format_prepare(mbus_format); + + if (format->which == V4L2_SUBDEV_FORMAT_TRY) + *v4l2_subdev_get_try_format(subdev, state, format->pad) = + *mbus_format; + else + csi2_dev->bridge.mbus_format = *mbus_format; + + mutex_unlock(lock); + + return 0; +} + +static const struct v4l2_subdev_pad_ops sun8i_a83t_mipi_csi2_pad_ops = { + .init_cfg = sun8i_a83t_mipi_csi2_init_cfg, + .enum_mbus_code = sun8i_a83t_mipi_csi2_enum_mbus_code, + .get_fmt = sun8i_a83t_mipi_csi2_get_fmt, + .set_fmt = sun8i_a83t_mipi_csi2_set_fmt, +}; + +static const struct v4l2_subdev_ops sun8i_a83t_mipi_csi2_subdev_ops = { + .video = &sun8i_a83t_mipi_csi2_video_ops, + .pad = &sun8i_a83t_mipi_csi2_pad_ops, +}; + +/* Media Entity */ + +static const struct media_entity_operations sun8i_a83t_mipi_csi2_entity_ops = { + .link_validate = v4l2_subdev_link_validate, +}; + +/* V4L2 Async */ + +static int +sun8i_a83t_mipi_csi2_notifier_bound(struct v4l2_async_notifier *notifier, + struct v4l2_subdev *remote_subdev, + struct v4l2_async_subdev *async_subdev) +{ + struct v4l2_subdev *subdev = notifier->sd; + struct sun8i_a83t_mipi_csi2_device *csi2_dev = + container_of(notifier, struct sun8i_a83t_mipi_csi2_device, + bridge.notifier); + struct media_entity *sink_entity = &subdev->entity; + struct media_entity *source_entity = &remote_subdev->entity; + struct device *dev = csi2_dev->dev; + int sink_pad_index = 0; + int source_pad_index; + int ret; + + ret = media_entity_get_fwnode_pad(source_entity, remote_subdev->fwnode, + MEDIA_PAD_FL_SOURCE); + if (ret < 0) { + dev_err(dev, "missing source pad in external entity %s\n", + source_entity->name); + return -EINVAL; + } + + source_pad_index = ret; + + dev_dbg(dev, "creating %s:%u -> %s:%u link\n", source_entity->name, + source_pad_index, sink_entity->name, sink_pad_index); + + ret = media_create_pad_link(source_entity, source_pad_index, + sink_entity, sink_pad_index, + MEDIA_LNK_FL_ENABLED | + MEDIA_LNK_FL_IMMUTABLE); + if (ret) { + dev_err(dev, "failed to create %s:%u -> %s:%u link\n", + source_entity->name, source_pad_index, + sink_entity->name, sink_pad_index); + return ret; + } + + csi2_dev->bridge.source_subdev = remote_subdev; + + return 0; +} + +static const struct v4l2_async_notifier_operations +sun8i_a83t_mipi_csi2_notifier_ops = { + .bound = sun8i_a83t_mipi_csi2_notifier_bound, +}; + +/* Bridge */ + +static int +sun8i_a83t_mipi_csi2_bridge_source_setup(struct sun8i_a83t_mipi_csi2_device *csi2_dev) +{ + struct v4l2_async_notifier *notifier = &csi2_dev->bridge.notifier; + struct v4l2_fwnode_endpoint *endpoint = &csi2_dev->bridge.endpoint; + struct v4l2_async_subdev *subdev_async; + struct fwnode_handle *handle; + struct device *dev = csi2_dev->dev; + int ret; + + handle = fwnode_graph_get_endpoint_by_id(dev_fwnode(dev), 0, 0, + FWNODE_GRAPH_ENDPOINT_NEXT); + if (!handle) + return -ENODEV; + + endpoint->bus_type = V4L2_MBUS_CSI2_DPHY; + + ret = v4l2_fwnode_endpoint_parse(handle, endpoint); + if (ret) + goto complete; + + subdev_async = + v4l2_async_nf_add_fwnode_remote(notifier, handle, + struct v4l2_async_subdev); + if (IS_ERR(subdev_async)) + ret = PTR_ERR(subdev_async); + +complete: + fwnode_handle_put(handle); + + return ret; +} + +static int +sun8i_a83t_mipi_csi2_bridge_setup(struct sun8i_a83t_mipi_csi2_device *csi2_dev) +{ + struct sun8i_a83t_mipi_csi2_bridge *bridge = &csi2_dev->bridge; + struct v4l2_subdev *subdev = &bridge->subdev; + struct v4l2_async_notifier *notifier = &bridge->notifier; + struct media_pad *pads = bridge->pads; + struct device *dev = csi2_dev->dev; + int ret; + + mutex_init(&bridge->lock); + + /* V4L2 Subdev */ + + v4l2_subdev_init(subdev, &sun8i_a83t_mipi_csi2_subdev_ops); + strscpy(subdev->name, SUN8I_A83T_MIPI_CSI2_NAME, sizeof(subdev->name)); + subdev->flags |= V4L2_SUBDEV_FL_HAS_DEVNODE; + subdev->owner = THIS_MODULE; + subdev->dev = dev; + + v4l2_set_subdevdata(subdev, csi2_dev); + + /* Media Entity */ + + subdev->entity.function = MEDIA_ENT_F_VID_IF_BRIDGE; + subdev->entity.ops = &sun8i_a83t_mipi_csi2_entity_ops; + + /* Media Pads */ + + pads[SUN8I_A83T_MIPI_CSI2_PAD_SINK].flags = MEDIA_PAD_FL_SINK; + pads[SUN8I_A83T_MIPI_CSI2_PAD_SOURCE].flags = MEDIA_PAD_FL_SOURCE; + + ret = media_entity_pads_init(&subdev->entity, + SUN8I_A83T_MIPI_CSI2_PAD_COUNT, pads); + if (ret) + return ret; + + /* V4L2 Async */ + + v4l2_async_nf_init(notifier); + notifier->ops = &sun8i_a83t_mipi_csi2_notifier_ops; + + ret = sun8i_a83t_mipi_csi2_bridge_source_setup(csi2_dev); + if (ret) + goto error_v4l2_notifier_cleanup; + + ret = v4l2_async_subdev_nf_register(subdev, notifier); + if (ret < 0) + goto error_v4l2_notifier_cleanup; + + /* V4L2 Subdev */ + + ret = v4l2_async_register_subdev(subdev); + if (ret < 0) + goto error_v4l2_notifier_unregister; + + return 0; + +error_v4l2_notifier_unregister: + v4l2_async_nf_unregister(notifier); + +error_v4l2_notifier_cleanup: + v4l2_async_nf_cleanup(notifier); + + media_entity_cleanup(&subdev->entity); + + return ret; +} + +static void +sun8i_a83t_mipi_csi2_bridge_cleanup(struct sun8i_a83t_mipi_csi2_device *csi2_dev) +{ + struct v4l2_subdev *subdev = &csi2_dev->bridge.subdev; + struct v4l2_async_notifier *notifier = &csi2_dev->bridge.notifier; + + v4l2_async_unregister_subdev(subdev); + v4l2_async_nf_unregister(notifier); + v4l2_async_nf_cleanup(notifier); + media_entity_cleanup(&subdev->entity); +} + +/* Platform */ + +static int sun8i_a83t_mipi_csi2_suspend(struct device *dev) +{ + struct sun8i_a83t_mipi_csi2_device *csi2_dev = dev_get_drvdata(dev); + + clk_disable_unprepare(csi2_dev->clock_misc); + clk_disable_unprepare(csi2_dev->clock_mipi); + clk_disable_unprepare(csi2_dev->clock_mod); + reset_control_assert(csi2_dev->reset); + + return 0; +} + +static int sun8i_a83t_mipi_csi2_resume(struct device *dev) +{ + struct sun8i_a83t_mipi_csi2_device *csi2_dev = dev_get_drvdata(dev); + int ret; + + ret = reset_control_deassert(csi2_dev->reset); + if (ret) { + dev_err(dev, "failed to deassert reset\n"); + return ret; + } + + ret = clk_prepare_enable(csi2_dev->clock_mod); + if (ret) { + dev_err(dev, "failed to enable module clock\n"); + goto error_reset; + } + + ret = clk_prepare_enable(csi2_dev->clock_mipi); + if (ret) { + dev_err(dev, "failed to enable MIPI clock\n"); + goto error_clock_mod; + } + + ret = clk_prepare_enable(csi2_dev->clock_misc); + if (ret) { + dev_err(dev, "failed to enable CSI misc clock\n"); + goto error_clock_mipi; + } + + sun8i_a83t_mipi_csi2_init(csi2_dev); + + return 0; + +error_clock_mipi: + clk_disable_unprepare(csi2_dev->clock_mipi); + +error_clock_mod: + clk_disable_unprepare(csi2_dev->clock_mod); + +error_reset: + reset_control_assert(csi2_dev->reset); + + return ret; +} + +static const struct dev_pm_ops sun8i_a83t_mipi_csi2_pm_ops = { + .runtime_suspend = sun8i_a83t_mipi_csi2_suspend, + .runtime_resume = sun8i_a83t_mipi_csi2_resume, +}; + +static const struct regmap_config sun8i_a83t_mipi_csi2_regmap_config = { + .reg_bits = 32, + .reg_stride = 4, + .val_bits = 32, + .max_register = 0x120, +}; + +static int +sun8i_a83t_mipi_csi2_resources_setup(struct sun8i_a83t_mipi_csi2_device *csi2_dev, + struct platform_device *platform_dev) +{ + struct device *dev = csi2_dev->dev; + void __iomem *io_base; + int ret; + + /* Registers */ + + io_base = devm_platform_ioremap_resource(platform_dev, 0); + if (IS_ERR(io_base)) + return PTR_ERR(io_base); + + csi2_dev->regmap = + devm_regmap_init_mmio_clk(dev, "bus", io_base, + &sun8i_a83t_mipi_csi2_regmap_config); + if (IS_ERR(csi2_dev->regmap)) { + dev_err(dev, "failed to init register map\n"); + return PTR_ERR(csi2_dev->regmap); + } + + /* Clocks */ + + csi2_dev->clock_mod = devm_clk_get(dev, "mod"); + if (IS_ERR(csi2_dev->clock_mod)) { + dev_err(dev, "failed to acquire mod clock\n"); + return PTR_ERR(csi2_dev->clock_mod); + } + + ret = clk_set_rate_exclusive(csi2_dev->clock_mod, 297000000); + if (ret) { + dev_err(dev, "failed to set mod clock rate\n"); + return ret; + } + + csi2_dev->clock_mipi = devm_clk_get(dev, "mipi"); + if (IS_ERR(csi2_dev->clock_mipi)) { + dev_err(dev, "failed to acquire mipi clock\n"); + return PTR_ERR(csi2_dev->clock_mipi); + } + + csi2_dev->clock_misc = devm_clk_get(dev, "misc"); + if (IS_ERR(csi2_dev->clock_misc)) { + dev_err(dev, "failed to acquire misc clock\n"); + return PTR_ERR(csi2_dev->clock_misc); + } + + /* Reset */ + + csi2_dev->reset = devm_reset_control_get_shared(dev, NULL); + if (IS_ERR(csi2_dev->reset)) { + dev_err(dev, "failed to get reset controller\n"); + return PTR_ERR(csi2_dev->reset); + } + + /* D-PHY */ + + ret = sun8i_a83t_dphy_register(csi2_dev); + if (ret) { + dev_err(dev, "failed to initialize MIPI D-PHY\n"); + return ret; + } + + /* Runtime PM */ + + pm_runtime_enable(dev); + + return 0; +} + +static void +sun8i_a83t_mipi_csi2_resources_cleanup(struct sun8i_a83t_mipi_csi2_device *csi2_dev) +{ + pm_runtime_disable(csi2_dev->dev); + phy_exit(csi2_dev->dphy); + clk_rate_exclusive_put(csi2_dev->clock_mod); +} + +static int sun8i_a83t_mipi_csi2_probe(struct platform_device *platform_dev) +{ + struct sun8i_a83t_mipi_csi2_device *csi2_dev; + struct device *dev = &platform_dev->dev; + int ret; + + csi2_dev = devm_kzalloc(dev, sizeof(*csi2_dev), GFP_KERNEL); + if (!csi2_dev) + return -ENOMEM; + + csi2_dev->dev = dev; + platform_set_drvdata(platform_dev, csi2_dev); + + ret = sun8i_a83t_mipi_csi2_resources_setup(csi2_dev, platform_dev); + if (ret) + return ret; + + ret = sun8i_a83t_mipi_csi2_bridge_setup(csi2_dev); + if (ret) + return ret; + + return 0; +} + +static int sun8i_a83t_mipi_csi2_remove(struct platform_device *platform_dev) +{ + struct sun8i_a83t_mipi_csi2_device *csi2_dev = + platform_get_drvdata(platform_dev); + + sun8i_a83t_mipi_csi2_bridge_cleanup(csi2_dev); + sun8i_a83t_mipi_csi2_resources_cleanup(csi2_dev); + + return 0; +} + +static const struct of_device_id sun8i_a83t_mipi_csi2_of_match[] = { + { .compatible = "allwinner,sun8i-a83t-mipi-csi2" }, + {}, +}; +MODULE_DEVICE_TABLE(of, sun8i_a83t_mipi_csi2_of_match); + +static struct platform_driver sun8i_a83t_mipi_csi2_platform_driver = { + .probe = sun8i_a83t_mipi_csi2_probe, + .remove = sun8i_a83t_mipi_csi2_remove, + .driver = { + .name = SUN8I_A83T_MIPI_CSI2_NAME, + .of_match_table = of_match_ptr(sun8i_a83t_mipi_csi2_of_match), + .pm = &sun8i_a83t_mipi_csi2_pm_ops, + }, +}; +module_platform_driver(sun8i_a83t_mipi_csi2_platform_driver); + +MODULE_DESCRIPTION("Allwinner A83T MIPI CSI-2 and D-PHY Controller Driver"); +MODULE_AUTHOR("Paul Kocialkowski "); +MODULE_LICENSE("GPL"); diff --git a/drivers/media/platform/sunxi/sun8i-a83t-mipi-csi2/sun8i_a83t_mipi_csi2.h b/drivers/media/platform/sunxi/sun8i-a83t-mipi-csi2/sun8i_a83t_mipi_csi2.h new file mode 100644 index 000000000000..f1e64c53434c --- /dev/null +++ b/drivers/media/platform/sunxi/sun8i-a83t-mipi-csi2/sun8i_a83t_mipi_csi2.h @@ -0,0 +1,55 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * Copyright 2020 Kévin L'hôpital + * Copyright 2020-2022 Bootlin + * Author: Paul Kocialkowski + */ + +#ifndef _SUN8I_A83T_MIPI_CSI2_H_ +#define _SUN8I_A83T_MIPI_CSI2_H_ + +#include +#include +#include +#include +#include + +#define SUN8I_A83T_MIPI_CSI2_NAME "sun8i-a83t-mipi-csi2" + +enum sun8i_a83t_mipi_csi2_pad { + SUN8I_A83T_MIPI_CSI2_PAD_SINK = 0, + SUN8I_A83T_MIPI_CSI2_PAD_SOURCE = 1, + SUN8I_A83T_MIPI_CSI2_PAD_COUNT = 2, +}; + +struct sun8i_a83t_mipi_csi2_format { + u32 mbus_code; + u8 data_type; + u32 bpp; +}; + +struct sun8i_a83t_mipi_csi2_bridge { + struct v4l2_subdev subdev; + struct media_pad pads[SUN8I_A83T_MIPI_CSI2_PAD_COUNT]; + struct v4l2_fwnode_endpoint endpoint; + struct v4l2_async_notifier notifier; + struct v4l2_mbus_framefmt mbus_format; + struct mutex lock; /* Mbus format lock. */ + + struct v4l2_subdev *source_subdev; +}; + +struct sun8i_a83t_mipi_csi2_device { + struct device *dev; + + struct regmap *regmap; + struct clk *clock_mod; + struct clk *clock_mipi; + struct clk *clock_misc; + struct reset_control *reset; + struct phy *dphy; + + struct sun8i_a83t_mipi_csi2_bridge bridge; +}; + +#endif diff --git a/drivers/media/platform/sunxi/sun8i-a83t-mipi-csi2/sun8i_a83t_mipi_csi2_reg.h b/drivers/media/platform/sunxi/sun8i-a83t-mipi-csi2/sun8i_a83t_mipi_csi2_reg.h new file mode 100644 index 000000000000..2cfc9eb490e6 --- /dev/null +++ b/drivers/media/platform/sunxi/sun8i-a83t-mipi-csi2/sun8i_a83t_mipi_csi2_reg.h @@ -0,0 +1,151 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * Copyright 2020 Kévin L'hôpital + * Copyright 2020-2022 Bootlin + * Author: Paul Kocialkowski + */ + +#ifndef _SUN8I_A83T_MIPI_CSI2_REG_H_ +#define _SUN8I_A83T_MIPI_CSI2_REG_H_ + +#define SUN8I_A83T_MIPI_CSI2_VERSION_REG 0x0 +#define SUN8I_A83T_MIPI_CSI2_CTRL_REG 0x4 +#define SUN8I_A83T_MIPI_CSI2_CTRL_INIT_VALUE 0xb8c39bec +#define SUN8I_A83T_MIPI_CSI2_CTRL_RESET_N BIT(31) +#define SUN8I_A83T_MIPI_CSI2_RX_PKT_NUM_REG 0x8 +#define SUN8I_A83T_MIPI_CSI2_RX_PKT_NUM_INIT_VALUE 0xb8d257f8 +#define SUN8I_A83T_MIPI_CSI2_RSVD0_REG 0xc + +#define SUN8I_A83T_MIPI_CSI2_RSVD1_REG 0x18 +#define SUN8I_A83T_MIPI_CSI2_RSVD1_HW_LOCK_VALUE 0xb8c8a30c +#define SUN8I_A83T_MIPI_CSI2_RSVD2_REG 0x1c +#define SUN8I_A83T_MIPI_CSI2_RSVD2_HW_LOCK_VALUE 0xb8df8ad7 +#define SUN8I_A83T_MIPI_CSI2_INT_STA0_REG 0x20 +#define SUN8I_A83T_MIPI_CSI2_INT_STA0_ECC_ERR_DBL BIT(28) +#define SUN8I_A83T_MIPI_CSI2_INT_STA0_LINE_CKSM_ERR_VC3 BIT(27) +#define SUN8I_A83T_MIPI_CSI2_INT_STA0_LINE_CKSM_ERR_VC2 BIT(26) +#define SUN8I_A83T_MIPI_CSI2_INT_STA0_LINE_CKSM_ERR_VC1 BIT(25) +#define SUN8I_A83T_MIPI_CSI2_INT_STA0_LINE_CKSM_ERR_VC0 BIT(24) +#define SUN8I_A83T_MIPI_CSI2_INT_STA0_LINE_SEQ_ERR_DT3 BIT(23) +#define SUN8I_A83T_MIPI_CSI2_INT_STA0_LINE_SEQ_ERR_DT2 BIT(22) +#define SUN8I_A83T_MIPI_CSI2_INT_STA0_LINE_SEQ_ERR_DT1 BIT(21) +#define SUN8I_A83T_MIPI_CSI2_INT_STA0_LINE_SEQ_ERR_DT0 BIT(20) +#define SUN8I_A83T_MIPI_CSI2_INT_STA0_LS_LE_ERR_DT3 BIT(19) +#define SUN8I_A83T_MIPI_CSI2_INT_STA0_LS_LE_ERR_DT2 BIT(18) +#define SUN8I_A83T_MIPI_CSI2_INT_STA0_LS_LE_ERR_DT1 BIT(17) +#define SUN8I_A83T_MIPI_CSI2_INT_STA0_LS_LE_ERR_DT0 BIT(16) +#define SUN8I_A83T_MIPI_CSI2_INT_STA0_CRC_ERR_VC3 BIT(15) +#define SUN8I_A83T_MIPI_CSI2_INT_STA0_CRC_ERR_VC2 BIT(14) +#define SUN8I_A83T_MIPI_CSI2_INT_STA0_CRC_ERR_VC1 BIT(13) +#define SUN8I_A83T_MIPI_CSI2_INT_STA0_CRC_ERR_VC0 BIT(12) +#define SUN8I_A83T_MIPI_CSI2_INT_STA0_FRM_SEQ_ERR_VC3 BIT(11) +#define SUN8I_A83T_MIPI_CSI2_INT_STA0_FRM_SEQ_ERR_VC2 BIT(10) +#define SUN8I_A83T_MIPI_CSI2_INT_STA0_FRM_SEQ_ERR_VC1 BIT(9) +#define SUN8I_A83T_MIPI_CSI2_INT_STA0_FRM_SEQ_ERR_VC0 BIT(8) +#define SUN8I_A83T_MIPI_CSI2_INT_STA0_FS_FE_ERR_VC3 BIT(7) +#define SUN8I_A83T_MIPI_CSI2_INT_STA0_FS_FE_ERR_VC2 BIT(6) +#define SUN8I_A83T_MIPI_CSI2_INT_STA0_FS_FE_ERR_VC1 BIT(5) +#define SUN8I_A83T_MIPI_CSI2_INT_STA0_FS_FE_ERR_VC0 BIT(4) +#define SUN8I_A83T_MIPI_CSI2_INT_STA0_SOT_SYNC_ERR_3 BIT(3) +#define SUN8I_A83T_MIPI_CSI2_INT_STA0_SOT_SYNC_ERR_2 BIT(2) +#define SUN8I_A83T_MIPI_CSI2_INT_STA0_SOT_SYNC_ERR_1 BIT(1) +#define SUN8I_A83T_MIPI_CSI2_INT_STA0_SOT_SYNC_ERR_0 BIT(0) +#define SUN8I_A83T_MIPI_CSI2_INT_STA1_REG 0x24 +#define SUN8I_A83T_MIPI_CSI2_INT_STA1_LINE_SEQ_ERR_DT7 BIT(23) +#define SUN8I_A83T_MIPI_CSI2_INT_STA1_LINE_SEQ_ERR_DT6 BIT(22) +#define SUN8I_A83T_MIPI_CSI2_INT_STA1_LINE_SEQ_ERR_DT5 BIT(21) +#define SUN8I_A83T_MIPI_CSI2_INT_STA1_LINE_SEQ_ERR_DT4 BIT(20) +#define SUN8I_A83T_MIPI_CSI2_INT_STA1_LS_LE_ERR_DT7 BIT(19) +#define SUN8I_A83T_MIPI_CSI2_INT_STA1_LS_LE_ERR_DT6 BIT(18) +#define SUN8I_A83T_MIPI_CSI2_INT_STA1_LS_LE_ERR_DT5 BIT(17) +#define SUN8I_A83T_MIPI_CSI2_INT_STA1_LS_LE_ERR_DT4 BIT(16) +#define SUN8I_A83T_MIPI_CSI2_INT_STA1_DT_ERR_VC3 BIT(15) +#define SUN8I_A83T_MIPI_CSI2_INT_STA1_DT_ERR_VC2 BIT(14) +#define SUN8I_A83T_MIPI_CSI2_INT_STA1_DT_ERR_VC1 BIT(13) +#define SUN8I_A83T_MIPI_CSI2_INT_STA1_DT_ERR_VC0 BIT(12) +#define SUN8I_A83T_MIPI_CSI2_INT_STA1_ECC_ERR1_VC3 BIT(11) +#define SUN8I_A83T_MIPI_CSI2_INT_STA1_ECC_ERR1_VC2 BIT(10) +#define SUN8I_A83T_MIPI_CSI2_INT_STA1_ECC_ERR1_VC1 BIT(9) +#define SUN8I_A83T_MIPI_CSI2_INT_STA1_ECC_ERR1_VC0 BIT(8) +#define SUN8I_A83T_MIPI_CSI2_INT_STA1_SOT_ERR_3 BIT(7) +#define SUN8I_A83T_MIPI_CSI2_INT_STA1_SOT_ERR_2 BIT(6) +#define SUN8I_A83T_MIPI_CSI2_INT_STA1_SOT_ERR_1 BIT(5) +#define SUN8I_A83T_MIPI_CSI2_INT_STA1_SOT_ERR_0 BIT(4) +#define SUN8I_A83T_MIPI_CSI2_INT_STA1_ESC_ENTRY_ERR_3 BIT(3) +#define SUN8I_A83T_MIPI_CSI2_INT_STA1_ESC_ENTRY_ERR_2 BIT(2) +#define SUN8I_A83T_MIPI_CSI2_INT_STA1_ESC_ENTRY_ERR_1 BIT(1) +#define SUN8I_A83T_MIPI_CSI2_INT_STA1_ESC_ENTRY_ERR_0 BIT(0) +#define SUN8I_A83T_MIPI_CSI2_INT_MSK0_REG 0x28 +#define SUN8I_A83T_MIPI_CSI2_INT_MSK0_ECC_ERR_DBL BIT(28) +#define SUN8I_A83T_MIPI_CSI2_INT_MSK0_CKSM_ERR_VC3 BIT(27) +#define SUN8I_A83T_MIPI_CSI2_INT_MSK0_CKSM_ERR_VC2 BIT(26) +#define SUN8I_A83T_MIPI_CSI2_INT_MSK0_CKSM_ERR_VC1 BIT(25) +#define SUN8I_A83T_MIPI_CSI2_INT_MSK0_CKSM_ERR_VC0 BIT(24) +#define SUN8I_A83T_MIPI_CSI2_INT_MSK0_LINE_SEQ_ERR_DT3 BIT(23) +#define SUN8I_A83T_MIPI_CSI2_INT_MSK0_LINE_SEQ_ERR_DT2 BIT(22) +#define SUN8I_A83T_MIPI_CSI2_INT_MSK0_LINE_SEQ_ERR_DT1 BIT(21) +#define SUN8I_A83T_MIPI_CSI2_INT_MSK0_LINE_SEQ_ERR_DT0 BIT(20) +#define SUN8I_A83T_MIPI_CSI2_INT_MSK0_LS_LE_ERR_DT3 BIT(19) +#define SUN8I_A83T_MIPI_CSI2_INT_MSK0_LS_LE_ERR_DT2 BIT(18) +#define SUN8I_A83T_MIPI_CSI2_INT_MSK0_LS_LE_ERR_DT1 BIT(17) +#define SUN8I_A83T_MIPI_CSI2_INT_MSK0_LS_LE_ERR_DT0 BIT(16) +#define SUN8I_A83T_MIPI_CSI2_INT_MSK0_CRC_ERR_VC3 BIT(15) +#define SUN8I_A83T_MIPI_CSI2_INT_MSK0_CRC_ERR_VC2 BIT(14) +#define SUN8I_A83T_MIPI_CSI2_INT_MSK0_CRC_ERR_VC1 BIT(13) +#define SUN8I_A83T_MIPI_CSI2_INT_MSK0_CRC_ERR_VC0 BIT(12) +#define SUN8I_A83T_MIPI_CSI2_INT_MSK0_FRM_SEQ_ERR_VC3 BIT(11) +#define SUN8I_A83T_MIPI_CSI2_INT_MSK0_FRM_SEQ_ERR_VC2 BIT(10) +#define SUN8I_A83T_MIPI_CSI2_INT_MSK0_FRM_SEQ_ERR_VC1 BIT(9) +#define SUN8I_A83T_MIPI_CSI2_INT_MSK0_FRM_SEQ_ERR_VC0 BIT(8) +#define SUN8I_A83T_MIPI_CSI2_INT_MSK0_FS_FE_ERR_VC3 BIT(7) +#define SUN8I_A83T_MIPI_CSI2_INT_MSK0_FS_FE_ERR_VC2 BIT(6) +#define SUN8I_A83T_MIPI_CSI2_INT_MSK0_FS_FE_ERR_VC1 BIT(5) +#define SUN8I_A83T_MIPI_CSI2_INT_MSK0_FS_FE_ERR_VC0 BIT(4) +#define SUN8I_A83T_MIPI_CSI2_INT_MSK0_SOT_SYNC_ERR_3 BIT(3) +#define SUN8I_A83T_MIPI_CSI2_INT_MSK0_SOT_SYNC_ERR_2 BIT(2) +#define SUN8I_A83T_MIPI_CSI2_INT_MSK0_SOT_SYNC_ERR_1 BIT(1) +#define SUN8I_A83T_MIPI_CSI2_INT_MSK0_SOT_SYNC_ERR_0 BIT(0) +#define SUN8I_A83T_MIPI_CSI2_INT_MSK1_REG 0x2c +#define SUN8I_A83T_MIPI_CSI2_INT_MSK1_DT_ERR_VC3 BIT(15) +#define SUN8I_A83T_MIPI_CSI2_INT_MSK1_DT_ERR_VC2 BIT(14) +#define SUN8I_A83T_MIPI_CSI2_INT_MSK1_DT_ERR_VC1 BIT(13) +#define SUN8I_A83T_MIPI_CSI2_INT_MSK1_DT_ERR_VC0 BIT(12) +#define SUN8I_A83T_MIPI_CSI2_INT_MSK1_ECC_ERR1_VC3 BIT(11) +#define SUN8I_A83T_MIPI_CSI2_INT_MSK1_ECC_ERR1_VC2 BIT(10) +#define SUN8I_A83T_MIPI_CSI2_INT_MSK1_ECC_ERR1_VC1 BIT(9) +#define SUN8I_A83T_MIPI_CSI2_INT_MSK1_ECC_ERR1_VC0 BIT(8) +#define SUN8I_A83T_MIPI_CSI2_INT_MSK1_SOT_ERR_3 BIT(7) +#define SUN8I_A83T_MIPI_CSI2_INT_MSK1_SOT_ERR_2 BIT(6) +#define SUN8I_A83T_MIPI_CSI2_INT_MSK1_SOT_ERR_1 BIT(5) +#define SUN8I_A83T_MIPI_CSI2_INT_MSK1_SOT_ERR_0 BIT(4) +#define SUN8I_A83T_MIPI_CSI2_INT_MSK1_ESC_ENTRY_ERR_3 BIT(3) +#define SUN8I_A83T_MIPI_CSI2_INT_MSK1_ESC_ENTRY_ERR_2 BIT(2) +#define SUN8I_A83T_MIPI_CSI2_INT_MSK1_ESC_ENTRY_ERR_1 BIT(1) +#define SUN8I_A83T_MIPI_CSI2_INT_MSK1_ESC_ENTRY_ERR_0 BIT(0) + +#define SUN8I_A83T_MIPI_CSI2_CFG_REG 0x100 +#define SUN8I_A83T_MIPI_CSI2_CFG_INIT_VALUE 0xb8c64f24 +#define SUN8I_A83T_MIPI_CSI2_CFG_SYNC_EN BIT(31) +#define SUN8I_A83T_MIPI_CSI2_CFG_BYPASS_ECC_EN BIT(29) +#define SUN8I_A83T_MIPI_CSI2_CFG_UNPKT_EN BIT(28) +#define SUN8I_A83T_MIPI_CSI2_CFG_NONE_UNPKT_RX_MODE BIT(27) +#define SUN8I_A83T_MIPI_CSI2_CFG_YC_SWAB BIT(26) +#define SUN8I_A83T_MIPI_CSI2_CFG_N_BYTE BIT(24) +#define SUN8I_A83T_MIPI_CSI2_CFG_SYNC_DLY_CYCLE(v) (((v) << 18) & \ + GENMASK(22, 18)) +#define SUN8I_A83T_MIPI_CSI2_CFG_N_CHANNEL(v) ((((v) - 1) << 16) & \ + GENMASK(17, 16)) +#define SUN8I_A83T_MIPI_CSI2_CFG_N_LANE(v) ((((v) - 1) << 4) & \ + GENMASK(5, 4)) +#define SUN8I_A83T_MIPI_CSI2_VCDT0_REG 0x104 +#define SUN8I_A83T_MIPI_CSI2_VCDT0_CH_VC(ch, vc) (((vc) & GENMASK(1, 0)) << \ + ((ch) * 8 + 6)) +#define SUN8I_A83T_MIPI_CSI2_VCDT0_CH_DT(ch, t) (((t) & GENMASK(5, 0)) << \ + ((ch) * 8)) +#define SUN8I_A83T_MIPI_CSI2_VCDT1_REG 0x108 +#define SUN8I_A83T_MIPI_CSI2_VCDT1_CH_VC(ch, vc) (((vc) & GENMASK(1, 0)) << \ + (((ch) - 4) * 8 + 6)) +#define SUN8I_A83T_MIPI_CSI2_VCDT1_CH_DT(ch, t) (((t) & GENMASK(5, 0)) << \ + (((ch) - 4) * 8)) + +#endif