From patchwork Sun May 8 12:12:25 2022 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Krishna Kurapati X-Patchwork-Id: 12842357 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from bombadil.infradead.org (bombadil.infradead.org [198.137.202.133]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.lore.kernel.org (Postfix) with ESMTPS id B6048C433FE for ; Sun, 8 May 2022 12:12:53 +0000 (UTC) DKIM-Signature: v=1; a=rsa-sha256; q=dns/txt; c=relaxed/relaxed; d=lists.infradead.org; s=bombadil.20210309; h=Sender: Content-Transfer-Encoding:Content-Type:List-Subscribe:List-Help:List-Post: List-Archive:List-Unsubscribe:List-Id:MIME-Version:References:In-Reply-To: Message-ID:Date:Subject:CC:To:From:Reply-To:Content-ID:Content-Description: Resent-Date:Resent-From:Resent-Sender:Resent-To:Resent-Cc:Resent-Message-ID: List-Owner; bh=KeSJrRcsqXtwe/PHJs6kd6gL77SfYQ4dWjfgj+ugBKU=; b=x50tE/30hvV+Ga 3r6P45UT00T5b4vPqOPDyBNY8gbDy5EF6RCrGegbuxWpmICHPS3tDlZMBHXLhXxN/YqqDTJ5oN83P wFyfyxRaNF3XDA8VdPWbkkGczj+N+N3FbkqjN+YzYVRLvF5ErtjYnkgXLXH+PnBRAjjXgFsac/RKY xq52k9Or7Bd7Y8gQq6JY1tDe5Rd1E5OCWNTnUipS+L7K4YsAXfjvqhfeyaRir35UWOCED15dgx4Ae HLBKrWUS0qgSF1XwHU66/CgmONim7jwxAI3+K8r31II8hATx2nQJzSk8xUeD/1GfjOT0dpAdU+pb+ zTDfLJgBJplh/uZqtz5Q==; Received: from localhost ([::1] helo=bombadil.infradead.org) by bombadil.infradead.org with esmtp (Exim 4.94.2 #2 (Red Hat Linux)) id 1nnfmP-00A5I1-34; Sun, 08 May 2022 12:12:53 +0000 Received: from alexa-out.qualcomm.com ([129.46.98.28]) by bombadil.infradead.org with esmtps (Exim 4.94.2 #2 (Red Hat Linux)) id 1nnfmL-00A5GC-2d for linux-phy@lists.infradead.org; Sun, 08 May 2022 12:12:51 +0000 DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=quicinc.com; i=@quicinc.com; q=dns/txt; s=qcdkim; t=1652011969; x=1683547969; h=from:to:cc:subject:date:message-id:in-reply-to: references:mime-version; bh=fnNHJxAPXycISLahZG/ArDLNjEE5mOeO6vA5iZnDJfs=; b=XBNwTc61vvLH2AVZMxNwRIalwdK/bsi5k9jQU7czkEzk5lRem3Yhneo8 4ogOT82oWjzbTNRXRduInSM79bjFynZuIVjJyrYDSbw3TRP6RoB4KEr/r TVj66dOS3H/K8AB4CtVjFqiZTya9L8aO2FjHC61LBlyTJdA73Hw5pch2v Q=; Received: from ironmsg09-lv.qualcomm.com ([10.47.202.153]) by alexa-out.qualcomm.com with ESMTP; 08 May 2022 05:12:48 -0700 X-QCInternal: smtphost Received: from nasanex01c.na.qualcomm.com ([10.47.97.222]) by ironmsg09-lv.qualcomm.com with ESMTP/TLS/ECDHE-RSA-AES256-GCM-SHA384; 08 May 2022 05:12:46 -0700 Received: from nalasex01a.na.qualcomm.com (10.47.209.196) by nasanex01c.na.qualcomm.com (10.47.97.222) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384) id 15.2.986.22; Sun, 8 May 2022 05:12:46 -0700 Received: from hu-kriskura-hyd.qualcomm.com (10.80.80.8) by nalasex01a.na.qualcomm.com (10.47.209.196) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384) id 15.2.986.22; Sun, 8 May 2022 05:12:40 -0700 From: Krishna Kurapati To: Krzysztof Kozlowski , Rob Herring , Andy Gross , Bjorn Andersson , Greg Kroah-Hartman , Stephen Boyd , "Doug Anderson" , Matthias Kaehlcke , Wesley Cheng CC: , , , , , , , , Sandeep Maheswaram , Krishna Kurapati Subject: [v3 1/3] dt-bindings: phy: qcom, usb-snps-femto-v2: Add phy override params bindings Date: Sun, 8 May 2022 17:42:25 +0530 Message-ID: <1652011947-18575-2-git-send-email-quic_kriskura@quicinc.com> X-Mailer: git-send-email 2.7.4 In-Reply-To: <1652011947-18575-1-git-send-email-quic_kriskura@quicinc.com> References: <1652011947-18575-1-git-send-email-quic_kriskura@quicinc.com> MIME-Version: 1.0 X-Originating-IP: [10.80.80.8] X-ClientProxiedBy: nasanex01b.na.qualcomm.com (10.46.141.250) To nalasex01a.na.qualcomm.com (10.47.209.196) X-CRM114-Version: 20100106-BlameMichelson ( TRE 0.8.0 (BSD) ) MR-646709E3 X-CRM114-CacheID: sfid-20220508_051249_182450_319CEC72 X-CRM114-Status: GOOD ( 13.17 ) X-BeenThere: linux-phy@lists.infradead.org X-Mailman-Version: 2.1.34 Precedence: list List-Id: Linux Phy Mailing list List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: "linux-phy" Errors-To: linux-phy-bounces+linux-phy=archiver.kernel.org@lists.infradead.org From: Sandeep Maheswaram Add device tree bindings for SNPS phy tuning parameters. Signed-off-by: Sandeep Maheswaram Signed-off-by: Krishna Kurapati --- .../bindings/phy/qcom,usb-snps-femto-v2.yaml | 87 ++++++++++++++++++++++ 1 file changed, 87 insertions(+) diff --git a/Documentation/devicetree/bindings/phy/qcom,usb-snps-femto-v2.yaml b/Documentation/devicetree/bindings/phy/qcom,usb-snps-femto-v2.yaml index 1ce251d..6c2ecdd 100644 --- a/Documentation/devicetree/bindings/phy/qcom,usb-snps-femto-v2.yaml +++ b/Documentation/devicetree/bindings/phy/qcom,usb-snps-femto-v2.yaml @@ -53,6 +53,93 @@ properties: vdda33-supply: description: phandle to the regulator 3.3V supply node. + qcom,hs-disconnect-bps: + $ref: /schemas/types.yaml#/definitions/int32 + description: + This adjusts the voltage level for the threshold used to + detect a disconnect event at the host. Possible values are. + The values defined are in multiples of basis points (1bp = 0.01%). + The hardware accepts only discrete values. The value closest to the + provided input will be chosen as the override value for this param. + + qcom,squelch-detector-bps: + $ref: /schemas/types.yaml#/definitions/int32 + description: + This adjusts the voltage level for the threshold used to + detect valid high-speed data. + The values defined are in multiples of basis points (1bp = 0.01%). + The hardware accepts only discrete values. The value closest to the + provided input will be chosen as the override value for this param. + + qcom,hs-amplitude-bps: + $ref: /schemas/types.yaml#/definitions/int32 + description: + This adjusts the high-speed DC level voltage. + The values defined are in multiples of basis points (1bp = 0.01%). + The hardware accepts only discrete values. The value closest to the + provided input will be chosen as the override value for this param. + + qcom,pre-emphasis-duration-bps: + $ref: /schemas/types.yaml#/definitions/int32 + description: + This signal controls the duration for which the + HS pre-emphasis current is sourced onto DP<#> or DM<#>. + The HS Transmitter pre-emphasis duration is defined in terms of + unit amounts. One unit of pre-emphasis duration is approximately + 650 ps and is defined as 1X pre-emphasis duration. + The values defined are in multiples of basis points (1bp = 0.01%). + The hardware accepts only discrete values. The value closest to the + provided input will be chosen as the override value for this param. + + qcom,pre-emphasis-amplitude-bps: + $ref: /schemas/types.yaml#/definitions/int32 + description: + This signal controls the amount of current sourced to + DP<#> and DM<#> after a J-to-K or K-to-J transition. + The HS Transmitter pre-emphasis current is defined in terms of unit + amounts. One unit amount is approximately 2 mA and is defined as + 1X pre-emphasis current. + The values defined are in multiples of basis points (1bp = 0.01%). + The hardware accepts only discrete values. The value closest to the + provided input will be chosen as the override value for this param. + + qcom,hs-rise-fall-time-bps: + $ref: /schemas/types.yaml#/definitions/int32 + description: + This adjusts the rise/fall times of the high-speed waveform. + The values defined are in multiples of basis points (1bp = 0.01%). + The hardware accepts only discrete values. The value closest to the + provided input will be chosen as the override value for this param. + + qcom,hs-crossover-voltage: + $ref: /schemas/types.yaml#/definitions/int32 + description: + This adjusts the voltage at which the DP<#> and DM<#> + signals cross while transmitting in HS mode. + The values defined are in milli volts. The hardware accepts only + discrete values. The value closest to the provided input will be + chosen as the override value for this param. + + qcom,hs-output-impedance: + $ref: /schemas/types.yaml#/definitions/int32 + description: + In some applications, there can be significant series resistance + on the D+ and D- paths between the transceiver and cable. This adjusts + the driver source impedance to compensate for added series + resistance on the USB. The values defined are in milliohms. + The hardware accepts only discrete values. The value closest to the + provided input will be chosen as the override value for this param. + + qcom,ls-fs-output-impedance-bps: + $ref: /schemas/types.yaml#/definitions/int32 + description: + This adjusts the low- and full-speed single-ended source + impedance while driving high. The following adjustment values are based + on nominal process, voltage, and temperature. + The values defined are in multiples of basis points (1bp = 0.01%). + The hardware accepts only discrete values. The value closest to the + provided input will be chosen as the override value for this param. + required: - compatible - reg From patchwork Sun May 8 12:12:26 2022 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Krishna Kurapati X-Patchwork-Id: 12842358 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from bombadil.infradead.org (bombadil.infradead.org [198.137.202.133]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.lore.kernel.org (Postfix) with ESMTPS id 8535CC433EF for ; Sun, 8 May 2022 12:13:04 +0000 (UTC) DKIM-Signature: v=1; a=rsa-sha256; q=dns/txt; c=relaxed/relaxed; d=lists.infradead.org; s=bombadil.20210309; h=Sender: Content-Transfer-Encoding:Content-Type:List-Subscribe:List-Help:List-Post: List-Archive:List-Unsubscribe:List-Id:MIME-Version:References:In-Reply-To: Message-ID:Date:Subject:CC:To:From:Reply-To:Content-ID:Content-Description: Resent-Date:Resent-From:Resent-Sender:Resent-To:Resent-Cc:Resent-Message-ID: List-Owner; bh=xxWJ+gfKbHVqZnth1TnVy1dnSVG82Rs4Qwj7ScfjBis=; b=WpdhGl1nYQpZDZ FvrdpdQ2FL8s5y+t721WoGBCSOSzHM/BtAtBAa1kvfMTDBAukUnYu8IOXKlAezxLtzxLY3JxmsKo/ R8Epw5itpNGVcNCCc+he0QNmbeM011wYXy5RNfyzKXX180T+2RQOYTynKObtRX/TxAZHpaFfXlnAB 3Vi5VTnKgcfoKGzwfjqsRiHcwRUznn3XDJvYQmwT2j1l71WWDsmhsFSvvg5NI8zAZzCjoUJF8IeM5 iBKLGxYXvdB3U85+bYuSVsuqy7rQ7r5yU3yRwYAcGTQglA6CYtn8s0u0vS3/1m3qMHNB/15+LdLaR /egWdUGog0n+DtEPtkmg==; Received: from localhost ([::1] helo=bombadil.infradead.org) by bombadil.infradead.org with esmtp (Exim 4.94.2 #2 (Red Hat Linux)) id 1nnfma-00A5Oj-0B; Sun, 08 May 2022 12:13:04 +0000 Received: from alexa-out-sd-02.qualcomm.com ([199.106.114.39]) by bombadil.infradead.org with esmtps (Exim 4.94.2 #2 (Red Hat Linux)) id 1nnfmR-00A5Jx-MD for linux-phy@lists.infradead.org; Sun, 08 May 2022 12:12:57 +0000 DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=quicinc.com; i=@quicinc.com; q=dns/txt; s=qcdkim; t=1652011975; x=1683547975; h=from:to:cc:subject:date:message-id:in-reply-to: references:mime-version; bh=55eRyspxdySCSWHwzjMAnw1L/ibohe0oq88j5bPmjtM=; b=HPwDJTIyPUmqQh42J2UTBORdRieKOzcNMIxPnwDCgQrQ1QmLF/SzfqdA K5XdjjhjidkzNH2zjg+9OAJE7/EtsymgVlqxXvp2fQOslId8I0rASFG0H qjwyND/mjJJDsRwrQe4pE5dkV+s2CB6CNju6D4BYZg+uwvXP8s5lvtqCs c=; Received: from unknown (HELO ironmsg02-sd.qualcomm.com) ([10.53.140.142]) by alexa-out-sd-02.qualcomm.com with ESMTP; 08 May 2022 05:12:54 -0700 X-QCInternal: smtphost Received: from nasanex01c.na.qualcomm.com ([10.47.97.222]) by ironmsg02-sd.qualcomm.com with ESMTP/TLS/ECDHE-RSA-AES256-GCM-SHA384; 08 May 2022 05:12:54 -0700 Received: from nalasex01a.na.qualcomm.com (10.47.209.196) by nasanex01c.na.qualcomm.com (10.47.97.222) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384) id 15.2.986.22; Sun, 8 May 2022 05:12:53 -0700 Received: from hu-kriskura-hyd.qualcomm.com (10.80.80.8) by nalasex01a.na.qualcomm.com (10.47.209.196) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384) id 15.2.986.22; Sun, 8 May 2022 05:12:47 -0700 From: Krishna Kurapati To: Krzysztof Kozlowski , Rob Herring , Andy Gross , Bjorn Andersson , Greg Kroah-Hartman , Stephen Boyd , "Doug Anderson" , Matthias Kaehlcke , Wesley Cheng CC: , , , , , , , , Krishna Kurapati Subject: [v3 2/3] phy: qcom-snps: Add support for overriding phy tuning parameters Date: Sun, 8 May 2022 17:42:26 +0530 Message-ID: <1652011947-18575-3-git-send-email-quic_kriskura@quicinc.com> X-Mailer: git-send-email 2.7.4 In-Reply-To: <1652011947-18575-1-git-send-email-quic_kriskura@quicinc.com> References: <1652011947-18575-1-git-send-email-quic_kriskura@quicinc.com> MIME-Version: 1.0 X-Originating-IP: [10.80.80.8] X-ClientProxiedBy: nasanex01b.na.qualcomm.com (10.46.141.250) To nalasex01a.na.qualcomm.com (10.47.209.196) X-CRM114-Version: 20100106-BlameMichelson ( TRE 0.8.0 (BSD) ) MR-646709E3 X-CRM114-CacheID: sfid-20220508_051255_796849_4F3F3746 X-CRM114-Status: GOOD ( 18.29 ) X-BeenThere: linux-phy@lists.infradead.org X-Mailman-Version: 2.1.34 Precedence: list List-Id: Linux Phy Mailing list List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: "linux-phy" Errors-To: linux-phy-bounces+linux-phy=archiver.kernel.org@lists.infradead.org Add support for overriding electrical signal tuning parameters for SNPS HS Phy. Signed-off-by: Krishna Kurapati Reported-by: kernel test robot --- drivers/phy/qualcomm/phy-qcom-snps-femto-v2.c | 252 +++++++++++++++++++++++++- 1 file changed, 250 insertions(+), 2 deletions(-) diff --git a/drivers/phy/qualcomm/phy-qcom-snps-femto-v2.c b/drivers/phy/qualcomm/phy-qcom-snps-femto-v2.c index 5d20378..bed2c90 100644 --- a/drivers/phy/qualcomm/phy-qcom-snps-femto-v2.c +++ b/drivers/phy/qualcomm/phy-qcom-snps-femto-v2.c @@ -52,6 +52,12 @@ #define USB2_SUSPEND_N BIT(2) #define USB2_SUSPEND_N_SEL BIT(3) +#define USB2_PHY_USB_PHY_HS_PHY_OVERRIDE_X0 (0x6c) +#define USB2_PHY_USB_PHY_HS_PHY_OVERRIDE_X1 (0x70) +#define USB2_PHY_USB_PHY_HS_PHY_OVERRIDE_X2 (0x74) +#define USB2_PHY_USB_PHY_HS_PHY_OVERRIDE_X3 (0x78) +#define PARAM_OVRD_MASK 0xFF + #define USB2_PHY_USB_PHY_CFG0 (0x94) #define UTMI_PHY_DATAPATH_CTRL_OVERRIDE_EN BIT(0) #define UTMI_PHY_CMN_CTRL_OVERRIDE_EN BIT(1) @@ -60,6 +66,16 @@ #define REFCLK_SEL_MASK GENMASK(1, 0) #define REFCLK_SEL_DEFAULT (0x2 << 0) +#define HS_DISCONNECT_MASK GENMASK(2, 0) +#define SQUELCH_DETECTOR_MASK GENMASK(7, 5) +#define HS_AMPLITUDE_MASK GENMASK(3, 0) +#define PREEMPHASIS_DURATION_MASK BIT(5) +#define PREEMPHASIS_AMPLITUDE_MASK GENMASK(7, 6) +#define HS_RISE_FALL_MASK GENMASK(1, 0) +#define HS_CROSSOVER_VOLTAGE_MASK GENMASK(3, 2) +#define HS_OUTPUT_IMPEDANCE_MASK GENMASK(5, 4) +#define LS_FS_OUTPUT_IMPEDANCE_MASK GENMASK(3, 0) + static const char * const qcom_snps_hsphy_vreg_names[] = { "vdda-pll", "vdda33", "vdda18", }; @@ -173,10 +189,195 @@ static int qcom_snps_hsphy_set_mode(struct phy *phy, enum phy_mode mode, return 0; } +struct override_param { + s32 value; + u8 reg; +}; + +#define OVERRIDE_PARAM(bps, val)\ +{ \ + .value = bps, \ + .reg = val, \ +} + +struct override_param_map { + struct override_param *param_table; + u8 table_size; + u8 reg_offset; + u8 param_mask; +}; + +#define OVERRIDE_PARAM_MAP(table, numElements, offset, mask) \ +{ \ + .param_table = table, \ + .table_size = numElements, \ + .reg_offset = offset, \ + .param_mask = mask, \ +} + +static const char *phy_seq_props[] = +{ + "qcom,hs-rise-fall-time-bps", + "qcom,squelch-detector-bps", + "qcom,preemphasis-duration", + "qcom,preemphasis-amplitude", + "qcom,hs-disconnect-bps", + "qcom,hs-amplitude-bps", + "qcom,hs-crossover-voltage", + "qcom,hs-output-impedance", + "qcom,ls-fs-output-impedance-bps", +}; + +static struct override_param hs_rise_fall_time_sc7280[] = { + OVERRIDE_PARAM(-4100, 3), + OVERRIDE_PARAM(0, 2), + OVERRIDE_PARAM(2810, 1), + OVERRIDE_PARAM(5430, 0), +}; + +static struct override_param squelch_det_threshold_sc7280[] = { + OVERRIDE_PARAM(-2090, 7), + OVERRIDE_PARAM(-1560, 6), + OVERRIDE_PARAM(-1030, 5), + OVERRIDE_PARAM(-530, 4), + OVERRIDE_PARAM(0, 3), + OVERRIDE_PARAM(530, 2), + OVERRIDE_PARAM(1060, 1), + OVERRIDE_PARAM(1590, 0), +}; + +static struct override_param hs_disconnect_sc7280[] = { + OVERRIDE_PARAM(-272, 0), + OVERRIDE_PARAM(0, 1), + OVERRIDE_PARAM(317, 2), + OVERRIDE_PARAM(630, 3), + OVERRIDE_PARAM(973, 4), + OVERRIDE_PARAM(1332, 5), + OVERRIDE_PARAM(1743, 6), + OVERRIDE_PARAM(2156, 7), +}; + +static struct override_param hs_amplitude_sc7280[] = { + OVERRIDE_PARAM(-660, 0), + OVERRIDE_PARAM(-440, 1), + OVERRIDE_PARAM(-220, 2), + OVERRIDE_PARAM(0, 3), + OVERRIDE_PARAM(230, 4), + OVERRIDE_PARAM(440, 5), + OVERRIDE_PARAM(650, 6), + OVERRIDE_PARAM(890, 7), + OVERRIDE_PARAM(1110, 8), + OVERRIDE_PARAM(1330, 9), + OVERRIDE_PARAM(1560, 10), + OVERRIDE_PARAM(1780, 11), + OVERRIDE_PARAM(2000, 12), + OVERRIDE_PARAM(2220, 13), + OVERRIDE_PARAM(2430, 14), + OVERRIDE_PARAM(2670, 15), +}; + +static struct override_param preemphasis_duration_sc7280[] = { + OVERRIDE_PARAM(100, 1), + OVERRIDE_PARAM(200, 0), +}; + +static struct override_param preemphasis_amplitude_sc7280[] = { + OVERRIDE_PARAM(100, 1), + OVERRIDE_PARAM(200, 2), + OVERRIDE_PARAM(300, 3), + OVERRIDE_PARAM(400, 0), +}; + +static struct override_param hs_crossover_voltage_sc7280[] = { + OVERRIDE_PARAM(-31, 1), + OVERRIDE_PARAM(28, 2), + OVERRIDE_PARAM(0, 3), +}; + +static struct override_param hs_output_impedance_sc7280[] = { + OVERRIDE_PARAM(-2300, 3), + OVERRIDE_PARAM(0, 2), + OVERRIDE_PARAM(2600, 1), + OVERRIDE_PARAM(6100, 0), +}; + +static struct override_param ls_fs_output_impedance_sc7280[] = { + OVERRIDE_PARAM(-1053, 15), + OVERRIDE_PARAM(-557, 7), + OVERRIDE_PARAM(0, 3), + OVERRIDE_PARAM(612, 1), + OVERRIDE_PARAM(1310, 0), +}; + +struct override_param_map sc7280_idp[] = { + OVERRIDE_PARAM_MAP( + hs_rise_fall_time_sc7280, + ARRAY_SIZE(hs_rise_fall_time_sc7280), + USB2_PHY_USB_PHY_HS_PHY_OVERRIDE_X2, + HS_RISE_FALL_MASK), + + OVERRIDE_PARAM_MAP( + squelch_det_threshold_sc7280, + ARRAY_SIZE(squelch_det_threshold_sc7280), + USB2_PHY_USB_PHY_HS_PHY_OVERRIDE_X0, + SQUELCH_DETECTOR_MASK), + + OVERRIDE_PARAM_MAP( + preemphasis_duration_sc7280, + ARRAY_SIZE(preemphasis_duration_sc7280), + USB2_PHY_USB_PHY_HS_PHY_OVERRIDE_X1, + PREEMPHASIS_DURATION_MASK), + + OVERRIDE_PARAM_MAP( + preemphasis_amplitude_sc7280, + ARRAY_SIZE(preemphasis_amplitude_sc7280), + USB2_PHY_USB_PHY_HS_PHY_OVERRIDE_X1, + PREEMPHASIS_AMPLITUDE_MASK), + + OVERRIDE_PARAM_MAP( + hs_disconnect_sc7280, + ARRAY_SIZE(hs_disconnect_sc7280), + USB2_PHY_USB_PHY_HS_PHY_OVERRIDE_X0, + HS_DISCONNECT_MASK), + + OVERRIDE_PARAM_MAP( + hs_amplitude_sc7280, + ARRAY_SIZE(hs_amplitude_sc7280), + USB2_PHY_USB_PHY_HS_PHY_OVERRIDE_X1, + HS_AMPLITUDE_MASK), + + OVERRIDE_PARAM_MAP( + hs_crossover_voltage_sc7280, + ARRAY_SIZE(hs_crossover_voltage_sc7280), + USB2_PHY_USB_PHY_HS_PHY_OVERRIDE_X2, + HS_CROSSOVER_VOLTAGE_MASK), + + OVERRIDE_PARAM_MAP( + hs_output_impedance_sc7280, + ARRAY_SIZE(hs_output_impedance_sc7280), + USB2_PHY_USB_PHY_HS_PHY_OVERRIDE_X2, + HS_OUTPUT_IMPEDANCE_MASK), + + OVERRIDE_PARAM_MAP( + ls_fs_output_impedance_sc7280, + ARRAY_SIZE(ls_fs_output_impedance_sc7280), + USB2_PHY_USB_PHY_HS_PHY_OVERRIDE_X3, + LS_FS_OUTPUT_IMPEDANCE_MASK), +}; + +struct phy_override_seq { + bool need_update; + u8 offset; + u8 value; + u8 mask; +}; + +struct phy_override_seq update_seq_cfg[ARRAY_SIZE(phy_seq_props)]; + static int qcom_snps_hsphy_init(struct phy *phy) { struct qcom_snps_hsphy *hsphy = phy_get_drvdata(phy); - int ret; + int ret, i; dev_vdbg(&phy->dev, "%s(): Initializing SNPS HS phy\n", __func__); @@ -223,6 +424,12 @@ static int qcom_snps_hsphy_init(struct phy *phy) qcom_snps_hsphy_write_mask(hsphy->base, USB2_PHY_USB_PHY_HS_PHY_CTRL1, VBUSVLDEXT0, VBUSVLDEXT0); + for(i = 0; i < ARRAY_SIZE(update_seq_cfg); i++) { + if (update_seq_cfg[i].need_update) + qcom_snps_hsphy_write_mask(hsphy->base, update_seq_cfg[i].offset, + update_seq_cfg[i].mask, update_seq_cfg[i].value); + } + qcom_snps_hsphy_write_mask(hsphy->base, USB2_PHY_USB_PHY_HS_PHY_CTRL_COMMON2, VREGBYPASS, VREGBYPASS); @@ -280,7 +487,10 @@ static const struct phy_ops qcom_snps_hsphy_gen_ops = { static const struct of_device_id qcom_snps_hsphy_of_match_table[] = { { .compatible = "qcom,sm8150-usb-hs-phy", }, { .compatible = "qcom,usb-snps-hs-5nm-phy", }, - { .compatible = "qcom,usb-snps-hs-7nm-phy", }, + { + .compatible = "qcom,usb-snps-hs-7nm-phy", + .data = &sc7280_idp + }, { .compatible = "qcom,usb-snps-femto-v2-phy", }, { } }; @@ -291,6 +501,43 @@ static const struct dev_pm_ops qcom_snps_hsphy_pm_ops = { qcom_snps_hsphy_runtime_resume, NULL) }; +static void hsphy_override_param_update_val(const struct override_param_map map, + s32 dt_val, struct phy_override_seq *seq_entry) +{ + int i; + + /* + * We prepare the param table for each param in increasing order + * of dt values. So we need to iterate over the list once to get + * the required register value. + */ + for (i = 0 ; i < map.table_size-1; i++) { + if (map.param_table[i].value >= dt_val) + break; + } + + seq_entry->need_update = true; + seq_entry->offset = map.reg_offset; + seq_entry->mask = map.param_mask; + seq_entry->value = map.param_table[i].reg << __ffs(map.param_mask); +} + +static void phy_read_param_override_seq(struct device *dev) +{ + struct device_node *node = dev->of_node; + s32 val; + int ret, i; + struct qcom_snps_hsphy *hsphy; + struct override_param_map *cfg = (struct override_param_map* ) of_device_get_match_data(dev); + hsphy = dev_get_drvdata(dev); + + for (i = 0; i < ARRAY_SIZE(phy_seq_props); i++) { + ret = of_property_read_s32(node, phy_seq_props[i], &val); + if (!ret) + hsphy_override_param_update_val(cfg[i], val, &update_seq_cfg[i]); + } +} + static int qcom_snps_hsphy_probe(struct platform_device *pdev) { struct device *dev = &pdev->dev; @@ -352,6 +599,7 @@ static int qcom_snps_hsphy_probe(struct platform_device *pdev) dev_set_drvdata(dev, hsphy); phy_set_drvdata(generic_phy, hsphy); + phy_read_param_override_seq(dev); phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate); if (!IS_ERR(phy_provider)) From patchwork Sun May 8 12:12:27 2022 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Krishna Kurapati X-Patchwork-Id: 12842359 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from bombadil.infradead.org (bombadil.infradead.org [198.137.202.133]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.lore.kernel.org (Postfix) with ESMTPS id A5D2DC433FE for ; Sun, 8 May 2022 12:13:05 +0000 (UTC) DKIM-Signature: v=1; a=rsa-sha256; q=dns/txt; c=relaxed/relaxed; d=lists.infradead.org; s=bombadil.20210309; h=Sender: Content-Transfer-Encoding:Content-Type:List-Subscribe:List-Help:List-Post: List-Archive:List-Unsubscribe:List-Id:MIME-Version:References:In-Reply-To: Message-ID:Date:Subject:CC:To:From:Reply-To:Content-ID:Content-Description: Resent-Date:Resent-From:Resent-Sender:Resent-To:Resent-Cc:Resent-Message-ID: List-Owner; bh=P6R2ZwUBjt7SdvYUQQXaHEYqRTXd9mAaDSMMKpNzwPw=; b=l/r1IK+nB/F1cq BlX1wR9vN5P5grh9fxCzPsr0UFZRexgFGK0hXxppJnPZSqvClclzEF+T25I/l1Q9OqGNbziDLQR57 cZtq3qwCAtqxZAYt3I7/SMdOZzHXN3ZtDynqtXKVzsaDywpsnbhfJDkPiG5VcxoNlA2IDIPnTpa4C I5tzucfBYpoXBfbwnapHWD6hwUmnS5TiuS5HL9b9dVSsZUF/mUoHbLAJl9c+rf2iMjhnRPgAwK42T O4SJcZMfqfh34PEnxENjw+igDull+T8LKujGOAOSh77T7tbaWAaJ7ylXmi+W3eI6KDc9rkqWepncb NJVJ+7tOL9XjzhcRkKuA==; Received: from localhost ([::1] helo=bombadil.infradead.org) by bombadil.infradead.org with esmtp (Exim 4.94.2 #2 (Red Hat Linux)) id 1nnfmb-00A5PY-2k; Sun, 08 May 2022 12:13:05 +0000 Received: from alexa-out-sd-02.qualcomm.com ([199.106.114.39]) by bombadil.infradead.org with esmtps (Exim 4.94.2 #2 (Red Hat Linux)) id 1nnfmW-00A5Jx-NJ for linux-phy@lists.infradead.org; Sun, 08 May 2022 12:13:03 +0000 DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=quicinc.com; i=@quicinc.com; q=dns/txt; s=qcdkim; t=1652011980; x=1683547980; h=from:to:cc:subject:date:message-id:in-reply-to: references:mime-version; bh=cKqGPlJNkX3XGHDQw9rwYXG67+kctMy2opGuORY0+ms=; b=hAgwPlen/J+uPgRw8+71t4KpzImlQ+BMmt5xpPSI/DKP3SaEznhiVMNG aoVpWcGbIwnbkfLDAb+Z6vp2oxMVE4Zm0dkZkuS5tk3/12Mil5xF3lMIf j2fy3qG07gdPBj8NHDMM31fkeIqBgC/k8nDV/Dha+AeZ7iciloOUrj8+P I=; Received: from unknown (HELO ironmsg05-sd.qualcomm.com) ([10.53.140.145]) by alexa-out-sd-02.qualcomm.com with ESMTP; 08 May 2022 05:13:00 -0700 X-QCInternal: smtphost Received: from nasanex01c.na.qualcomm.com ([10.47.97.222]) by ironmsg05-sd.qualcomm.com with ESMTP/TLS/ECDHE-RSA-AES256-GCM-SHA384; 08 May 2022 05:13:00 -0700 Received: from nalasex01a.na.qualcomm.com (10.47.209.196) by nasanex01c.na.qualcomm.com (10.47.97.222) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384) id 15.2.986.22; Sun, 8 May 2022 05:13:00 -0700 Received: from hu-kriskura-hyd.qualcomm.com (10.80.80.8) by nalasex01a.na.qualcomm.com (10.47.209.196) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384) id 15.2.986.22; Sun, 8 May 2022 05:12:54 -0700 From: Krishna Kurapati To: Krzysztof Kozlowski , Rob Herring , Andy Gross , Bjorn Andersson , Greg Kroah-Hartman , Stephen Boyd , "Doug Anderson" , Matthias Kaehlcke , Wesley Cheng CC: , , , , , , , , Krishna Kurapati , Sandeep Maheswaram Subject: [v3 3/3] arm64: dts: qcom: sc7280: Update SNPS Phy params for SC7280 IDP device Date: Sun, 8 May 2022 17:42:27 +0530 Message-ID: <1652011947-18575-4-git-send-email-quic_kriskura@quicinc.com> X-Mailer: git-send-email 2.7.4 In-Reply-To: <1652011947-18575-1-git-send-email-quic_kriskura@quicinc.com> References: <1652011947-18575-1-git-send-email-quic_kriskura@quicinc.com> MIME-Version: 1.0 X-Originating-IP: [10.80.80.8] X-ClientProxiedBy: nasanex01b.na.qualcomm.com (10.46.141.250) To nalasex01a.na.qualcomm.com (10.47.209.196) X-CRM114-Version: 20100106-BlameMichelson ( TRE 0.8.0 (BSD) ) MR-646709E3 X-CRM114-CacheID: sfid-20220508_051300_817998_1B63AA76 X-CRM114-Status: UNSURE ( 8.16 ) X-CRM114-Notice: Please train this message. X-BeenThere: linux-phy@lists.infradead.org X-Mailman-Version: 2.1.34 Precedence: list List-Id: Linux Phy Mailing list List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: "linux-phy" Errors-To: linux-phy-bounces+linux-phy=archiver.kernel.org@lists.infradead.org Overriding the SNPS Phy tuning parameters for SC7280 IDP device. Signed-off-by: Sandeep Maheswaram Signed-off-by: Krishna Kurapati --- arch/arm64/boot/dts/qcom/sc7280-idp.dtsi | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi index 5eb6689..ad85ffb 100644 --- a/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi @@ -325,6 +325,12 @@ vdda-pll-supply = <&vreg_l10c_0p8>; vdda33-supply = <&vreg_l2b_3p0>; vdda18-supply = <&vreg_l1c_1p8>; + qcom,hs-rise-fall-time-bps = <0>; + qcom,squelch-detector-bps = <(-2090)>; + qcom,hs-disconnect-bps = <1743>; + qcom,hs-amplitude-bps = <1780>; + qcom,hs-crossover-voltage = <(-31)>; + qcom,hs-output-impedance = <2600>; }; &usb_1_qmpphy {