From patchwork Thu May 19 04:28:07 2022 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Krishna Kurapati X-Patchwork-Id: 12854511 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from bombadil.infradead.org (bombadil.infradead.org [198.137.202.133]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.lore.kernel.org (Postfix) with ESMTPS id BAC95C4332F for ; Thu, 19 May 2022 04:28:30 +0000 (UTC) DKIM-Signature: v=1; a=rsa-sha256; q=dns/txt; c=relaxed/relaxed; d=lists.infradead.org; s=bombadil.20210309; h=Sender: Content-Transfer-Encoding:Content-Type:List-Subscribe:List-Help:List-Post: List-Archive:List-Unsubscribe:List-Id:MIME-Version:References:In-Reply-To: Message-ID:Date:Subject:CC:To:From:Reply-To:Content-ID:Content-Description: Resent-Date:Resent-From:Resent-Sender:Resent-To:Resent-Cc:Resent-Message-ID: List-Owner; bh=c3HbH4R89bW/pmHD8BwVgfcVyR7ujfN830NvNW/x2bc=; b=gwdaxELfO4ezxL cplGNq1euZi6iphcdqPfUy6MYYugknCZ+0pxT1NrT1MIhiOUBpdMm/Ftm9A8ah8GnQes9bmhAKyAN Ww1VdHOGAXHnCcPMr6IkeaJosZ5GGKXFgOPTI7iLcG641RQSnh/l8Y0st7F6PYqXXew7JQruL3/E2 Jn0H/0CKspAdWOV3WqoFJRQsKYH2wS5BxssXVVahiFqZAVGgdfRtg/gWWTfxq4a+HgNbc73yQH+wj 7Ea2rL6fcHe/DrryQJp/O1dlxWhlIZGtCXtjF7XylgWj+Dwyg88deZiw04lYttW3ze3oNr4SC5vOO 1aCxBEIOka5As5+OaLUA==; Received: from localhost ([::1] helo=bombadil.infradead.org) by bombadil.infradead.org with esmtp (Exim 4.94.2 #2 (Red Hat Linux)) id 1nrXm2-004y1N-2r; Thu, 19 May 2022 04:28:30 +0000 Received: from alexa-out-sd-01.qualcomm.com ([199.106.114.38]) by bombadil.infradead.org with esmtps (Exim 4.94.2 #2 (Red Hat Linux)) id 1nrXlz-004y0H-2t for linux-phy@lists.infradead.org; Thu, 19 May 2022 04:28:28 +0000 DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=quicinc.com; i=@quicinc.com; q=dns/txt; s=qcdkim; t=1652934507; x=1684470507; h=from:to:cc:subject:date:message-id:in-reply-to: references:mime-version; bh=qvbvLhVScimkHnlHK7CN1dr8SHlBZa93m82JcYL5Xgs=; b=u/AdLK2ysEQKO6FHCa9ZFDDhrulIeCieVPnfz6uC+Q5ZiwvB3j4FuMnZ zzOkSfF5/jyN5A/GoLxX2nTkwg+egG1iDhGRDRRAm82gSXa6ArJ8OyiHW 74t6vgJJD5q4HUuYDUMwsZgJ7/4YjfQ16MatFRf2zCPfcOcC/WLif9PtB Q=; Received: from unknown (HELO ironmsg01-sd.qualcomm.com) ([10.53.140.141]) by alexa-out-sd-01.qualcomm.com with ESMTP; 18 May 2022 21:28:27 -0700 X-QCInternal: smtphost Received: from nasanex01c.na.qualcomm.com ([10.47.97.222]) by ironmsg01-sd.qualcomm.com with ESMTP/TLS/ECDHE-RSA-AES256-GCM-SHA384; 18 May 2022 21:28:26 -0700 Received: from nalasex01a.na.qualcomm.com (10.47.209.196) by nasanex01c.na.qualcomm.com (10.47.97.222) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384) id 15.2.986.22; Wed, 18 May 2022 21:28:25 -0700 Received: from hu-kriskura-hyd.qualcomm.com (10.80.80.8) by nalasex01a.na.qualcomm.com (10.47.209.196) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384) id 15.2.986.22; Wed, 18 May 2022 21:28:19 -0700 From: Krishna Kurapati To: Krzysztof Kozlowski , Rob Herring , Andy Gross , Bjorn Andersson , Greg Kroah-Hartman , Stephen Boyd , "Doug Anderson" , Matthias Kaehlcke , Wesley Cheng CC: , , , , , , , , Sandeep Maheswaram , Krishna Kurapati Subject: [PATCH v6 1/3] dt-bindings: phy: qcom, usb-snps-femto-v2: Add phy override params bindings Date: Thu, 19 May 2022 09:58:07 +0530 Message-ID: <1652934489-23386-2-git-send-email-quic_kriskura@quicinc.com> X-Mailer: git-send-email 2.7.4 In-Reply-To: <1652934489-23386-1-git-send-email-quic_kriskura@quicinc.com> References: <1652934489-23386-1-git-send-email-quic_kriskura@quicinc.com> MIME-Version: 1.0 X-Originating-IP: [10.80.80.8] X-ClientProxiedBy: nasanex01b.na.qualcomm.com (10.46.141.250) To nalasex01a.na.qualcomm.com (10.47.209.196) X-CRM114-Version: 20100106-BlameMichelson ( TRE 0.8.0 (BSD) ) MR-646709E3 X-CRM114-CacheID: sfid-20220518_212827_188092_B9233FBB X-CRM114-Status: GOOD ( 14.37 ) X-BeenThere: linux-phy@lists.infradead.org X-Mailman-Version: 2.1.34 Precedence: list List-Id: Linux Phy Mailing list List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: "linux-phy" Errors-To: linux-phy-bounces+linux-phy=archiver.kernel.org@lists.infradead.org From: Sandeep Maheswaram Add device tree bindings for SNPS phy tuning parameters. Signed-off-by: Sandeep Maheswaram Signed-off-by: Krishna Kurapati Reviewed-by: Krzysztof Kozlowski --- .../bindings/phy/qcom,usb-snps-femto-v2.yaml | 96 ++++++++++++++++++++++ 1 file changed, 96 insertions(+) diff --git a/Documentation/devicetree/bindings/phy/qcom,usb-snps-femto-v2.yaml b/Documentation/devicetree/bindings/phy/qcom,usb-snps-femto-v2.yaml index 1ce251d..daeeb04 100644 --- a/Documentation/devicetree/bindings/phy/qcom,usb-snps-femto-v2.yaml +++ b/Documentation/devicetree/bindings/phy/qcom,usb-snps-femto-v2.yaml @@ -53,6 +53,102 @@ properties: vdda33-supply: description: phandle to the regulator 3.3V supply node. + qcom,hs-disconnect-bp: + description: + This adjusts the voltage level for the threshold used to + detect a disconnect event at the host. Possible values are. + The values defined are in multiples of basis points (1bp = 0.01%). + The hardware accepts only discrete values. The value closest to the + provided input will be chosen as the override value for this param. + minimum: -272 + maximum: 2156 + + qcom,squelch-detector-bp: + description: + This adjusts the voltage level for the threshold used to + detect valid high-speed data. + The values defined are in multiples of basis points (1bp = 0.01%). + The hardware accepts only discrete values. The value closest to the + provided input will be chosen as the override value for this param. + minimum: -2090 + maximum: 1590 + + qcom,hs-amplitude-bp: + description: + This adjusts the high-speed DC level voltage. + The values defined are in multiples of basis points (1bp = 0.01%). + The hardware accepts only discrete values. The value closest to the + provided input will be chosen as the override value for this param. + minimum: -660 + maximum: 2670 + + qcom,pre-emphasis-duration-bp: + description: + This signal controls the duration for which the + HS pre-emphasis current is sourced onto DP<#> or DM<#>. + The HS Transmitter pre-emphasis duration is defined in terms of + unit amounts. One unit of pre-emphasis duration is approximately + 650 ps and is defined as 1X pre-emphasis duration. + The values defined are in multiples of basis points (1bp = 0.01%). + The hardware accepts only discrete values. The value closest to the + provided input will be chosen as the override value for this param. + minimum: 10000 + maximum: 20000 + + qcom,pre-emphasis-amplitude-bp: + description: + This signal controls the amount of current sourced to + DP<#> and DM<#> after a J-to-K or K-to-J transition. + The HS Transmitter pre-emphasis current is defined in terms of unit + amounts. One unit amount is approximately 2 mA and is defined as + 1X pre-emphasis current. + The values defined are in multiples of basis points (1bp = 0.01%). + The hardware accepts only discrete values. The value closest to the + provided input will be chosen as the override value for this param. + minimum: 10000 + maximum: 40000 + + qcom,hs-rise-fall-time-bp: + description: + This adjusts the rise/fall times of the high-speed waveform. + The values defined are in multiples of basis points (1bp = 0.01%). + The hardware accepts only discrete values. The value closest to the + provided input will be chosen as the override value for this param. + minimum: -4100 + maximum: 5430 + + qcom,hs-crossover-voltage-microvolt: + description: + This adjusts the voltage at which the DP<#> and DM<#> + signals cross while transmitting in HS mode. + The values defined are in milli volts. The hardware accepts only + discrete values. The value closest to the provided input will be + chosen as the override value for this param. + minimum: -31000 + maximum: 28000 + + qcom,hs-output-impedance-micro-ohms: + description: + In some applications, there can be significant series resistance + on the D+ and D- paths between the transceiver and cable. This adjusts + the driver source impedance to compensate for added series + resistance on the USB. The values defined are in milli ohms. + The hardware accepts only discrete values. The value closest to the + provided input will be chosen as the override value for this param. + minimum: -2300000 + maximum: 6100000 + + qcom,ls-fs-output-impedance-bp: + description: + This adjusts the low- and full-speed single-ended source + impedance while driving high. The following adjustment values are based + on nominal process, voltage, and temperature. + The values defined are in multiples of basis points (1bp = 0.01%). + The hardware accepts only discrete values. The value closest to the + provided input will be chosen as the override value for this param. + minimum: -1053 + maximum: 1310 + required: - compatible - reg From patchwork Thu May 19 04:28:08 2022 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Krishna Kurapati X-Patchwork-Id: 12854512 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from bombadil.infradead.org (bombadil.infradead.org [198.137.202.133]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.lore.kernel.org (Postfix) with ESMTPS id CFA99C433FE for ; Thu, 19 May 2022 04:28:36 +0000 (UTC) DKIM-Signature: v=1; a=rsa-sha256; q=dns/txt; c=relaxed/relaxed; d=lists.infradead.org; s=bombadil.20210309; h=Sender: Content-Transfer-Encoding:Content-Type:List-Subscribe:List-Help:List-Post: List-Archive:List-Unsubscribe:List-Id:MIME-Version:References:In-Reply-To: Message-ID:Date:Subject:CC:To:From:Reply-To:Content-ID:Content-Description: Resent-Date:Resent-From:Resent-Sender:Resent-To:Resent-Cc:Resent-Message-ID: List-Owner; bh=0gtqjwl6AUMDha7g6f0cFZ7afzKSiGbtrgY4bDM7zKs=; b=n5W6YhEeCXehoC LdMahJ/Y175PX05OnlkhuE+YccPmzFwtK0vV++87PppXnZ4i+ZPT61nWS3gDOEYHz6jvnDbxhU1Tp h0gAmOibFhpFnfQ+YAH9bezTXiwyRN8lC3FUbHxDV2idy98xbvoaVu2E502gHATzXzFHXsvmFsSp3 IWZ/7XkiBFQs+CxQ6F8vNyH7/N8l9olK3Wj683uYl0e4LkDJburlxaC1Mx6rqrcEsb7st/hjDaKZu H5d7Uem2+fzJcmGbMAK3Ckx9j+wLv6UtuAUeuNa8taSs6DsPnPhLQFA2ZQJmL0uU4t++KAMVUzsH8 Q9GDS72KceBCOY3iMNsA==; Received: from localhost ([::1] helo=bombadil.infradead.org) by bombadil.infradead.org with esmtp (Exim 4.94.2 #2 (Red Hat Linux)) id 1nrXm8-004y3P-8u; Thu, 19 May 2022 04:28:36 +0000 Received: from alexa-out-sd-01.qualcomm.com ([199.106.114.38]) by bombadil.infradead.org with esmtps (Exim 4.94.2 #2 (Red Hat Linux)) id 1nrXm5-004y0H-HN for linux-phy@lists.infradead.org; Thu, 19 May 2022 04:28:35 +0000 DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=quicinc.com; i=@quicinc.com; q=dns/txt; s=qcdkim; t=1652934513; x=1684470513; h=from:to:cc:subject:date:message-id:in-reply-to: references:mime-version; bh=frdVPuSg5fXPewQK6fQTa0Y36cO+Nz3k0JHT5tbCUA8=; b=Xf/QgJaicquVN8QuphM9JqRciLSqSGb6PaeBslMDmnO0TnuAUGplX6aT dIrEseh0UR4KdUYs1YwWYhVqyq/METZfS7iPR6/MF78b+WXQVviUpMu80 PiaExiRKPhfwDU4MbbNZbXbxia/YKBx7zexnRlDfz47LOstgmVZQElBkU A=; Received: from unknown (HELO ironmsg-SD-alpha.qualcomm.com) ([10.53.140.30]) by alexa-out-sd-01.qualcomm.com with ESMTP; 18 May 2022 21:28:33 -0700 X-QCInternal: smtphost Received: from nasanex01c.na.qualcomm.com ([10.47.97.222]) by ironmsg-SD-alpha.qualcomm.com with ESMTP/TLS/ECDHE-RSA-AES256-GCM-SHA384; 18 May 2022 21:28:33 -0700 Received: from nalasex01a.na.qualcomm.com (10.47.209.196) by nasanex01c.na.qualcomm.com (10.47.97.222) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384) id 15.2.986.22; Wed, 18 May 2022 21:28:32 -0700 Received: from hu-kriskura-hyd.qualcomm.com (10.80.80.8) by nalasex01a.na.qualcomm.com (10.47.209.196) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384) id 15.2.986.22; Wed, 18 May 2022 21:28:26 -0700 From: Krishna Kurapati To: Krzysztof Kozlowski , Rob Herring , Andy Gross , Bjorn Andersson , Greg Kroah-Hartman , Stephen Boyd , "Doug Anderson" , Matthias Kaehlcke , Wesley Cheng CC: , , , , , , , , Krishna Kurapati Subject: [PATCH v6 2/3] phy: qcom-snps: Add support for overriding phy tuning parameters Date: Thu, 19 May 2022 09:58:08 +0530 Message-ID: <1652934489-23386-3-git-send-email-quic_kriskura@quicinc.com> X-Mailer: git-send-email 2.7.4 In-Reply-To: <1652934489-23386-1-git-send-email-quic_kriskura@quicinc.com> References: <1652934489-23386-1-git-send-email-quic_kriskura@quicinc.com> MIME-Version: 1.0 X-Originating-IP: [10.80.80.8] X-ClientProxiedBy: nasanex01b.na.qualcomm.com (10.46.141.250) To nalasex01a.na.qualcomm.com (10.47.209.196) X-CRM114-Version: 20100106-BlameMichelson ( TRE 0.8.0 (BSD) ) MR-646709E3 X-CRM114-CacheID: sfid-20220518_212833_646084_479A6F85 X-CRM114-Status: GOOD ( 20.07 ) X-BeenThere: linux-phy@lists.infradead.org X-Mailman-Version: 2.1.34 Precedence: list List-Id: Linux Phy Mailing list List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: "linux-phy" Errors-To: linux-phy-bounces+linux-phy=archiver.kernel.org@lists.infradead.org Add support for overriding electrical signal tuning parameters for SNPS HS Phy. Signed-off-by: Krishna Kurapati --- drivers/phy/qualcomm/phy-qcom-snps-femto-v2.c | 268 +++++++++++++++++++++++++- 1 file changed, 266 insertions(+), 2 deletions(-) diff --git a/drivers/phy/qualcomm/phy-qcom-snps-femto-v2.c b/drivers/phy/qualcomm/phy-qcom-snps-femto-v2.c index 5d20378..1ad8c20 100644 --- a/drivers/phy/qualcomm/phy-qcom-snps-femto-v2.c +++ b/drivers/phy/qualcomm/phy-qcom-snps-femto-v2.c @@ -52,6 +52,12 @@ #define USB2_SUSPEND_N BIT(2) #define USB2_SUSPEND_N_SEL BIT(3) +#define USB2_PHY_USB_PHY_HS_PHY_OVERRIDE_X0 (0x6c) +#define USB2_PHY_USB_PHY_HS_PHY_OVERRIDE_X1 (0x70) +#define USB2_PHY_USB_PHY_HS_PHY_OVERRIDE_X2 (0x74) +#define USB2_PHY_USB_PHY_HS_PHY_OVERRIDE_X3 (0x78) +#define PARAM_OVRD_MASK 0xFF + #define USB2_PHY_USB_PHY_CFG0 (0x94) #define UTMI_PHY_DATAPATH_CTRL_OVERRIDE_EN BIT(0) #define UTMI_PHY_CMN_CTRL_OVERRIDE_EN BIT(1) @@ -60,12 +66,76 @@ #define REFCLK_SEL_MASK GENMASK(1, 0) #define REFCLK_SEL_DEFAULT (0x2 << 0) +#define HS_DISCONNECT_MASK GENMASK(2, 0) + +#define SQUELCH_DETECTOR_MASK GENMASK(7, 5) + +#define HS_AMPLITUDE_MASK GENMASK(3, 0) + +#define PREEMPHASIS_DURATION_MASK BIT(5) + +#define PREEMPHASIS_AMPLITUDE_MASK GENMASK(7, 6) + +#define HS_RISE_FALL_MASK GENMASK(1, 0) + +#define HS_CROSSOVER_VOLTAGE_MASK GENMASK(3, 2) + +#define HS_OUTPUT_IMPEDANCE_MASK GENMASK(5, 4) + +#define LS_FS_OUTPUT_IMPEDANCE_MASK GENMASK(3, 0) + + static const char * const qcom_snps_hsphy_vreg_names[] = { "vdda-pll", "vdda33", "vdda18", }; #define SNPS_HS_NUM_VREGS ARRAY_SIZE(qcom_snps_hsphy_vreg_names) +struct override_param { + s32 value; + u8 reg; +}; + +#define OVERRIDE_PARAM(bps, val)\ +{ \ + .value = bps, \ + .reg = val, \ +} + +struct override_param_map { + struct override_param *param_table; + u8 table_size; + u8 reg_offset; + u8 param_mask; +}; + +#define OVERRIDE_PARAM_MAP(table, num_elements, offset, mask) \ +{ \ + .param_table = table, \ + .table_size = num_elements, \ + .reg_offset = offset, \ + .param_mask = mask, \ +} + +struct phy_override_seq { + bool need_update; + u8 offset; + u8 value; + u8 mask; +}; + +static const char *phy_seq_props[] = { + "qcom,hs-disconnect-bp", + "qcom,squelch-detector-bp", + "qcom,hs-amplitude-bp", + "qcom,pre-emphasis-duration-bp", + "qcom,pre-emphasis-amplitude-bp", + "qcom,hs-rise-fall-time-bp", + "qcom,hs-crossover-voltage-microvolt", + "qcom,hs-output-impedance-micro-ohm", + "qcom,ls-fs-output-impedance-bp", +}; + /** * struct qcom_snps_hsphy - snps hs phy attributes * @@ -91,6 +161,7 @@ struct qcom_snps_hsphy { bool phy_initialized; enum phy_mode mode; + struct phy_override_seq update_seq_cfg[ARRAY_SIZE(phy_seq_props)]; }; static inline void qcom_snps_hsphy_write_mask(void __iomem *base, u32 offset, @@ -173,10 +244,147 @@ static int qcom_snps_hsphy_set_mode(struct phy *phy, enum phy_mode mode, return 0; } +static struct override_param hs_disconnect_sc7280[] = { + OVERRIDE_PARAM(-272, 0), + OVERRIDE_PARAM(0, 1), + OVERRIDE_PARAM(317, 2), + OVERRIDE_PARAM(630, 3), + OVERRIDE_PARAM(973, 4), + OVERRIDE_PARAM(1332, 5), + OVERRIDE_PARAM(1743, 6), + OVERRIDE_PARAM(2156, 7), +}; + +static struct override_param squelch_det_threshold_sc7280[] = { + OVERRIDE_PARAM(-2090, 7), + OVERRIDE_PARAM(-1560, 6), + OVERRIDE_PARAM(-1030, 5), + OVERRIDE_PARAM(-530, 4), + OVERRIDE_PARAM(0, 3), + OVERRIDE_PARAM(530, 2), + OVERRIDE_PARAM(1060, 1), + OVERRIDE_PARAM(1590, 0), +}; + +static struct override_param hs_amplitude_sc7280[] = { + OVERRIDE_PARAM(-660, 0), + OVERRIDE_PARAM(-440, 1), + OVERRIDE_PARAM(-220, 2), + OVERRIDE_PARAM(0, 3), + OVERRIDE_PARAM(230, 4), + OVERRIDE_PARAM(440, 5), + OVERRIDE_PARAM(650, 6), + OVERRIDE_PARAM(890, 7), + OVERRIDE_PARAM(1110, 8), + OVERRIDE_PARAM(1330, 9), + OVERRIDE_PARAM(1560, 10), + OVERRIDE_PARAM(1780, 11), + OVERRIDE_PARAM(2000, 12), + OVERRIDE_PARAM(2220, 13), + OVERRIDE_PARAM(2430, 14), + OVERRIDE_PARAM(2670, 15), +}; + +static struct override_param preemphasis_duration_sc7280[] = { + OVERRIDE_PARAM(10000, 1), + OVERRIDE_PARAM(20000, 0), +}; + +static struct override_param preemphasis_amplitude_sc7280[] = { + OVERRIDE_PARAM(10000, 1), + OVERRIDE_PARAM(20000, 2), + OVERRIDE_PARAM(30000, 3), + OVERRIDE_PARAM(40000, 0), +}; + +static struct override_param hs_rise_fall_time_sc7280[] = { + OVERRIDE_PARAM(-4100, 3), + OVERRIDE_PARAM(0, 2), + OVERRIDE_PARAM(2810, 1), + OVERRIDE_PARAM(5430, 0), +}; + +static struct override_param hs_crossover_voltage_sc7280[] = { + OVERRIDE_PARAM(-31000, 1), + OVERRIDE_PARAM(0, 3), + OVERRIDE_PARAM(28000, 2), +}; + +static struct override_param hs_output_impedance_sc7280[] = { + OVERRIDE_PARAM(-2300000, 3), + OVERRIDE_PARAM(0, 2), + OVERRIDE_PARAM(2600000, 1), + OVERRIDE_PARAM(6100000, 0), +}; + +static struct override_param ls_fs_output_impedance_sc7280[] = { + OVERRIDE_PARAM(-1053, 15), + OVERRIDE_PARAM(-557, 7), + OVERRIDE_PARAM(0, 3), + OVERRIDE_PARAM(612, 1), + OVERRIDE_PARAM(1310, 0), +}; + +struct override_param_map sc7280_idp[] = { + OVERRIDE_PARAM_MAP( + hs_disconnect_sc7280, + ARRAY_SIZE(hs_disconnect_sc7280), + USB2_PHY_USB_PHY_HS_PHY_OVERRIDE_X0, + HS_DISCONNECT_MASK), + + OVERRIDE_PARAM_MAP( + squelch_det_threshold_sc7280, + ARRAY_SIZE(squelch_det_threshold_sc7280), + USB2_PHY_USB_PHY_HS_PHY_OVERRIDE_X0, + SQUELCH_DETECTOR_MASK), + + OVERRIDE_PARAM_MAP( + hs_amplitude_sc7280, + ARRAY_SIZE(hs_amplitude_sc7280), + USB2_PHY_USB_PHY_HS_PHY_OVERRIDE_X1, + HS_AMPLITUDE_MASK), + + OVERRIDE_PARAM_MAP( + preemphasis_duration_sc7280, + ARRAY_SIZE(preemphasis_duration_sc7280), + USB2_PHY_USB_PHY_HS_PHY_OVERRIDE_X1, + PREEMPHASIS_DURATION_MASK), + + OVERRIDE_PARAM_MAP( + preemphasis_amplitude_sc7280, + ARRAY_SIZE(preemphasis_amplitude_sc7280), + USB2_PHY_USB_PHY_HS_PHY_OVERRIDE_X1, + PREEMPHASIS_AMPLITUDE_MASK), + + OVERRIDE_PARAM_MAP( + hs_rise_fall_time_sc7280, + ARRAY_SIZE(hs_rise_fall_time_sc7280), + USB2_PHY_USB_PHY_HS_PHY_OVERRIDE_X2, + HS_RISE_FALL_MASK), + + OVERRIDE_PARAM_MAP( + hs_crossover_voltage_sc7280, + ARRAY_SIZE(hs_crossover_voltage_sc7280), + USB2_PHY_USB_PHY_HS_PHY_OVERRIDE_X2, + HS_CROSSOVER_VOLTAGE_MASK), + + OVERRIDE_PARAM_MAP( + hs_output_impedance_sc7280, + ARRAY_SIZE(hs_output_impedance_sc7280), + USB2_PHY_USB_PHY_HS_PHY_OVERRIDE_X2, + HS_OUTPUT_IMPEDANCE_MASK), + + OVERRIDE_PARAM_MAP( + ls_fs_output_impedance_sc7280, + ARRAY_SIZE(ls_fs_output_impedance_sc7280), + USB2_PHY_USB_PHY_HS_PHY_OVERRIDE_X3, + LS_FS_OUTPUT_IMPEDANCE_MASK), +}; + static int qcom_snps_hsphy_init(struct phy *phy) { struct qcom_snps_hsphy *hsphy = phy_get_drvdata(phy); - int ret; + int ret, i; dev_vdbg(&phy->dev, "%s(): Initializing SNPS HS phy\n", __func__); @@ -223,6 +431,14 @@ static int qcom_snps_hsphy_init(struct phy *phy) qcom_snps_hsphy_write_mask(hsphy->base, USB2_PHY_USB_PHY_HS_PHY_CTRL1, VBUSVLDEXT0, VBUSVLDEXT0); + for (i = 0; i < ARRAY_SIZE(hsphy->update_seq_cfg); i++) { + if (hsphy->update_seq_cfg[i].need_update) + qcom_snps_hsphy_write_mask(hsphy->base, + hsphy->update_seq_cfg[i].offset, + hsphy->update_seq_cfg[i].mask, + hsphy->update_seq_cfg[i].value); + } + qcom_snps_hsphy_write_mask(hsphy->base, USB2_PHY_USB_PHY_HS_PHY_CTRL_COMMON2, VREGBYPASS, VREGBYPASS); @@ -280,7 +496,10 @@ static const struct phy_ops qcom_snps_hsphy_gen_ops = { static const struct of_device_id qcom_snps_hsphy_of_match_table[] = { { .compatible = "qcom,sm8150-usb-hs-phy", }, { .compatible = "qcom,usb-snps-hs-5nm-phy", }, - { .compatible = "qcom,usb-snps-hs-7nm-phy", }, + { + .compatible = "qcom,usb-snps-hs-7nm-phy", + .data = &sc7280_idp, + }, { .compatible = "qcom,usb-snps-femto-v2-phy", }, { } }; @@ -291,6 +510,50 @@ static const struct dev_pm_ops qcom_snps_hsphy_pm_ops = { qcom_snps_hsphy_runtime_resume, NULL) }; +static void qcom_snps_hsphy_override_param_update_val( + const struct override_param_map map, + s32 dt_val, struct phy_override_seq *seq_entry) +{ + int i; + + /* + * Param table for each param is in increasing order + * of dt values. We need to iterate over the list to + * select the entry that has equal or the next highest value. + */ + for (i = 0; i < map.table_size - 1; i++) { + if (map.param_table[i].value >= dt_val) + break; + } + + seq_entry->need_update = true; + seq_entry->offset = map.reg_offset; + seq_entry->mask = map.param_mask; + seq_entry->value = map.param_table[i].reg << __ffs(map.param_mask); +} + +static void qcom_snps_hsphy_read_override_param_seq(struct device *dev) +{ + struct device_node *node = dev->of_node; + s32 val; + int ret, i; + struct qcom_snps_hsphy *hsphy; + const struct override_param_map *cfg = + (struct override_param_map *) of_device_get_match_data(dev); + + hsphy = dev_get_drvdata(dev); + + for (i = 0; i < ARRAY_SIZE(phy_seq_props); i++) { + ret = of_property_read_s32(node, phy_seq_props[i], &val); + if (!ret) { + dev_dbg(&hsphy->phy->dev, "Read param: %s val: %d\n", + phy_seq_props[i], val); + qcom_snps_hsphy_override_param_update_val(cfg[i], val, + &hsphy->update_seq_cfg[i]); + } + } +} + static int qcom_snps_hsphy_probe(struct platform_device *pdev) { struct device *dev = &pdev->dev; @@ -352,6 +615,7 @@ static int qcom_snps_hsphy_probe(struct platform_device *pdev) dev_set_drvdata(dev, hsphy); phy_set_drvdata(generic_phy, hsphy); + qcom_snps_hsphy_read_override_param_seq(dev); phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate); if (!IS_ERR(phy_provider)) From patchwork Thu May 19 04:28:09 2022 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Krishna Kurapati X-Patchwork-Id: 12854513 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from bombadil.infradead.org (bombadil.infradead.org [198.137.202.133]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.lore.kernel.org (Postfix) with ESMTPS id F3A6BC433FE for ; Thu, 19 May 2022 04:28:42 +0000 (UTC) DKIM-Signature: v=1; a=rsa-sha256; q=dns/txt; c=relaxed/relaxed; d=lists.infradead.org; s=bombadil.20210309; h=Sender: Content-Transfer-Encoding:Content-Type:List-Subscribe:List-Help:List-Post: List-Archive:List-Unsubscribe:List-Id:MIME-Version:References:In-Reply-To: Message-ID:Date:Subject:CC:To:From:Reply-To:Content-ID:Content-Description: Resent-Date:Resent-From:Resent-Sender:Resent-To:Resent-Cc:Resent-Message-ID: List-Owner; bh=YjL9tNuNhNcDZVN6uO2thwfigpIdK7UzgQE0sUJ46sA=; b=1no/udBd2JfL4A D2nklQPNuwNSj9Oe9cTNLooAmxX8p0tM1O2DPn2pIMDH26K7PnHu5iI59hb/4mnh61R3yvKWItChF 7wrbdlBNdLuQ6fi7QAU+6NtHajQkYiWiMXJT2J5NkCcIDnczfj49mmftYjJdNxe/YVF4vKmoai4dv 29Vd7hOvpV2AqL7QfEa+9JBKavhTlYko01b9I/FiICM18wCMDcXwT56SE2Ml+Sq1mBVFvw1HBL7e5 GertghNsCOp7l6QiqWQNPo/dPUQfZ/c6n+ONDCoqkhHPWcMvA5F2iEUhFuFLG+ffqHNGSBtiRn27y 85sWcZkA56BZDsbrtVbQ==; Received: from localhost ([::1] helo=bombadil.infradead.org) by bombadil.infradead.org with esmtp (Exim 4.94.2 #2 (Red Hat Linux)) id 1nrXmE-004y4n-DZ; Thu, 19 May 2022 04:28:42 +0000 Received: from alexa-out-sd-01.qualcomm.com ([199.106.114.38]) by bombadil.infradead.org with esmtps (Exim 4.94.2 #2 (Red Hat Linux)) id 1nrXmB-004y0H-TB for linux-phy@lists.infradead.org; Thu, 19 May 2022 04:28:41 +0000 DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=quicinc.com; i=@quicinc.com; q=dns/txt; s=qcdkim; t=1652934519; x=1684470519; h=from:to:cc:subject:date:message-id:in-reply-to: references:mime-version; bh=ssjMfpIq3/PibBWLY/aBRCb8vdiXXuasdNjfADwH2x4=; b=aikQKK7erQCLpVN/IUHnhK1ioTpdzVF8Qt1b0vhYYI7DadcTHz54Gn5n R/tVfLcNkjcr89v1vxnQ3gQxWgO+BgaXFmUrNrWQacateDhf1CJvwTQnY J+sJ+X+jgNUR5rQXUc7duAqJaBojZ21xZ/TetgVZ61zWp2pSXkHsou9lB c=; Received: from unknown (HELO ironmsg-SD-alpha.qualcomm.com) ([10.53.140.30]) by alexa-out-sd-01.qualcomm.com with ESMTP; 18 May 2022 21:28:39 -0700 X-QCInternal: smtphost Received: from nasanex01c.na.qualcomm.com ([10.47.97.222]) by ironmsg-SD-alpha.qualcomm.com with ESMTP/TLS/ECDHE-RSA-AES256-GCM-SHA384; 18 May 2022 21:28:39 -0700 Received: from nalasex01a.na.qualcomm.com (10.47.209.196) by nasanex01c.na.qualcomm.com (10.47.97.222) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384) id 15.2.986.22; Wed, 18 May 2022 21:28:38 -0700 Received: from hu-kriskura-hyd.qualcomm.com (10.80.80.8) by nalasex01a.na.qualcomm.com (10.47.209.196) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384) id 15.2.986.22; Wed, 18 May 2022 21:28:32 -0700 From: Krishna Kurapati To: Krzysztof Kozlowski , Rob Herring , Andy Gross , Bjorn Andersson , Greg Kroah-Hartman , Stephen Boyd , "Doug Anderson" , Matthias Kaehlcke , Wesley Cheng CC: , , , , , , , , Krishna Kurapati Subject: [PATCH v6 3/3] arm64: dts: qcom: sc7280: Update SNPS Phy params for SC7280 IDP device Date: Thu, 19 May 2022 09:58:09 +0530 Message-ID: <1652934489-23386-4-git-send-email-quic_kriskura@quicinc.com> X-Mailer: git-send-email 2.7.4 In-Reply-To: <1652934489-23386-1-git-send-email-quic_kriskura@quicinc.com> References: <1652934489-23386-1-git-send-email-quic_kriskura@quicinc.com> MIME-Version: 1.0 X-Originating-IP: [10.80.80.8] X-ClientProxiedBy: nasanex01b.na.qualcomm.com (10.46.141.250) To nalasex01a.na.qualcomm.com (10.47.209.196) X-CRM114-Version: 20100106-BlameMichelson ( TRE 0.8.0 (BSD) ) MR-646709E3 X-CRM114-CacheID: sfid-20220518_212839_981407_27D4E301 X-CRM114-Status: UNSURE ( 9.14 ) X-CRM114-Notice: Please train this message. X-BeenThere: linux-phy@lists.infradead.org X-Mailman-Version: 2.1.34 Precedence: list List-Id: Linux Phy Mailing list List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: "linux-phy" Errors-To: linux-phy-bounces+linux-phy=archiver.kernel.org@lists.infradead.org Overriding the SNPS Phy tuning parameters for SC7280 IDP device. Signed-off-by: Krishna Kurapati --- arch/arm64/boot/dts/qcom/sc7280-idp.dtsi | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi index 5eb6689..556fb04 100644 --- a/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi @@ -325,6 +325,12 @@ vdda-pll-supply = <&vreg_l10c_0p8>; vdda33-supply = <&vreg_l2b_3p0>; vdda18-supply = <&vreg_l1c_1p8>; + qcom,hs-rise-fall-time-bp = <0>; + qcom,squelch-detector-bp = <(-2090)>; + qcom,hs-disconnect-bp = <1743>; + qcom,hs-amplitude-bp = <1780>; + qcom,hs-crossover-voltage-microvolt = <(-31000)>; + qcom,hs-output-impedance-micro-ohm = <2600000>; }; &usb_1_qmpphy {