From patchwork Mon Nov 14 11:15:07 2022 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Herve Codina X-Patchwork-Id: 13042132 X-Patchwork-Delegate: geert@linux-m68k.org Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id 349DFC433FE for ; Mon, 14 Nov 2022 11:19:08 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S236060AbiKNLSb (ORCPT ); Mon, 14 Nov 2022 06:18:31 -0500 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:43074 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S236966AbiKNLR1 (ORCPT ); Mon, 14 Nov 2022 06:17:27 -0500 Received: from relay3-d.mail.gandi.net (relay3-d.mail.gandi.net [IPv6:2001:4b98:dc4:8::223]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id BD9E321E15; Mon, 14 Nov 2022 03:15:28 -0800 (PST) Received: (Authenticated sender: herve.codina@bootlin.com) by mail.gandi.net (Postfix) with ESMTPA id 79CDA60010; Mon, 14 Nov 2022 11:15:25 +0000 (UTC) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=bootlin.com; s=gm1; t=1668424527; h=from:from:reply-to:subject:subject:date:date:message-id:message-id: to:to:cc:cc:mime-version:mime-version: content-transfer-encoding:content-transfer-encoding: in-reply-to:in-reply-to:references:references; bh=9cWUMqDjvAHZdUQxoiw0zECZSqsjwWcZqSuQI2RSbWA=; b=ZybhulNlYT1pNvqmEey2XL1wO+TYkEWwGd+yGtJuqzYNp79OeRp7b9Plcn1uLKsv+cEsqW IGb0QgNytpqoA3fJ9buEWJkQLTaxooraYKXIlHyDSHKaxgGiDGTAsQ7N6phHBwOG54bJgS c7MTZUZ2+sw1OVr/cueK8OsKzWJb3B4ZsgqjOndC7iM8+IADPL+1sQpJmNKIpGOQ1zNqXB VFljSe76rWgPjja+giwJJJCLa/zwwJWoQV4+amHSXRXWnr/YGicLahr7Rl9QmmnxVwETSo Gc9SRryQbHsFEJUH+9y2m9hvgipmz6l9YTmSKTgRIjdEjwjXDaFPQ5WrvtSMkg== From: Herve Codina To: Geert Uytterhoeven , Michael Turquette , Stephen Boyd , Rob Herring , Krzysztof Kozlowski , Herve Codina , Greg Kroah-Hartman , Magnus Damm , Gareth Williams Cc: linux-renesas-soc@vger.kernel.org, linux-clk@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-usb@vger.kernel.org, Thomas Petazzoni , Miquel Raynal Subject: [PATCH v2 1/7] soc: renesas: r9a06g032-sysctrl: Export function to get the usb role Date: Mon, 14 Nov 2022 12:15:07 +0100 Message-Id: <20221114111513.1436165-2-herve.codina@bootlin.com> X-Mailer: git-send-email 2.38.1 In-Reply-To: <20221114111513.1436165-1-herve.codina@bootlin.com> References: <20221114111513.1436165-1-herve.codina@bootlin.com> MIME-Version: 1.0 Precedence: bulk List-ID: X-Mailing-List: linux-renesas-soc@vger.kernel.org The usb role retrieved is determined from the CFG_USB[H2MODE] value. The CFG_USB register is located within the system controller. We need a helper to get the usb role based on H2MODE value from the CFG_USB register without syscon. Signed-off-by: Herve Codina Reviewed-by: Geert Uytterhoeven --- drivers/clk/renesas/r9a06g032-clocks.c | 18 ++++++++++++++++++ include/linux/soc/renesas/r9a06g032-sysctrl.h | 2 ++ 2 files changed, 20 insertions(+) diff --git a/drivers/clk/renesas/r9a06g032-clocks.c b/drivers/clk/renesas/r9a06g032-clocks.c index 1488c9d6e639..9ee056498714 100644 --- a/drivers/clk/renesas/r9a06g032-clocks.c +++ b/drivers/clk/renesas/r9a06g032-clocks.c @@ -23,8 +23,11 @@ #include #include #include +#include #include +#define R9A06G032_SYSCTRL_USB 0x00 +#define R9A06G032_SYSCTRL_USB_H2MODE (1<<1) #define R9A06G032_SYSCTRL_DMAMUX 0xA0 struct r9a06g032_gate { @@ -341,6 +344,21 @@ int r9a06g032_sysctrl_set_dmamux(u32 mask, u32 val) } EXPORT_SYMBOL_GPL(r9a06g032_sysctrl_set_dmamux); + +/* Exported helper to get the H2MODE bit from USB register */ +int r9a06g032_sysctrl_get_usb_role(void) +{ + u32 usb; + + if (!sysctrl_priv) + return -EPROBE_DEFER; + + usb = readl(sysctrl_priv->reg + R9A06G032_SYSCTRL_USB); + return (usb & R9A06G032_SYSCTRL_USB_H2MODE) ? + USB_ROLE_HOST : USB_ROLE_DEVICE; +} +EXPORT_SYMBOL_GPL(r9a06g032_sysctrl_get_usb_role); + /* register/bit pairs are encoded as an uint16_t */ static void clk_rdesc_set(struct r9a06g032_priv *clocks, diff --git a/include/linux/soc/renesas/r9a06g032-sysctrl.h b/include/linux/soc/renesas/r9a06g032-sysctrl.h index 066dfb15cbdd..fc18d013a498 100644 --- a/include/linux/soc/renesas/r9a06g032-sysctrl.h +++ b/include/linux/soc/renesas/r9a06g032-sysctrl.h @@ -4,8 +4,10 @@ #ifdef CONFIG_CLK_R9A06G032 int r9a06g032_sysctrl_set_dmamux(u32 mask, u32 val); +int r9a06g032_sysctrl_get_usb_role(void); #else static inline int r9a06g032_sysctrl_set_dmamux(u32 mask, u32 val) { return -ENODEV; } +static inline int r9a06g032_sysctrl_get_usb_role(void) { return -ENODEV; } #endif #endif /* __LINUX_SOC_RENESAS_R9A06G032_SYSCTRL_H__ */ From patchwork Mon Nov 14 11:15:08 2022 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Herve Codina X-Patchwork-Id: 13042128 X-Patchwork-Delegate: geert@linux-m68k.org Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id 49B22C4708A for ; Mon, 14 Nov 2022 11:18:38 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S236411AbiKNLSX (ORCPT ); Mon, 14 Nov 2022 06:18:23 -0500 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:43096 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S236986AbiKNLRa (ORCPT ); Mon, 14 Nov 2022 06:17:30 -0500 Received: from relay3-d.mail.gandi.net (relay3-d.mail.gandi.net [217.70.183.195]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 2A70E21264; Mon, 14 Nov 2022 03:15:31 -0800 (PST) Received: (Authenticated sender: herve.codina@bootlin.com) by mail.gandi.net (Postfix) with ESMTPA id 65E936000D; Mon, 14 Nov 2022 11:15:28 +0000 (UTC) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=bootlin.com; s=gm1; t=1668424530; h=from:from:reply-to:subject:subject:date:date:message-id:message-id: to:to:cc:cc:mime-version:mime-version: content-transfer-encoding:content-transfer-encoding: in-reply-to:in-reply-to:references:references; bh=rIVbSyIZp3imXtExKvo6Q6tMSTGJpwHSvojy2YkLNKY=; b=oK5TgccplQbeUnRe5w0VER8tpOM+JeVb7gYR9spS/2E+xBFr96Bvr4+5xjqDTDe6LnN7l0 mkozKP6IFSmHc5JZV/8up090HkHIEZJedIryDPj+m/MX9/sXNkh3mlUuZjZKXbMkuUa7vv P0XoE/j7O8i24EdplurCC9RlRsI22/z55z7Easx8g6+nB7YKNsfZRbFEys7Z5OA2jgvfvR DdpVOoR+YZOtd9ZsdHYXPLHtelIiCeNVtqDQfpYR5qiOvOq/WsZVcu8dQz8mtN/s3DOTNJ b4ciRmoCNBOwmp8YlVAhjGaW/MqEpaaR8bjVoYw5kKKk/7rQJwQ4lmnYONPxEw== From: Herve Codina To: Geert Uytterhoeven , Michael Turquette , Stephen Boyd , Rob Herring , Krzysztof Kozlowski , Herve Codina , Greg Kroah-Hartman , Magnus Damm , Gareth Williams Cc: linux-renesas-soc@vger.kernel.org, linux-clk@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-usb@vger.kernel.org, Thomas Petazzoni , Miquel Raynal Subject: [PATCH v2 2/7] dt-bindings: clock: renesas,r9a06g032-sysctrl: Add h2mode property Date: Mon, 14 Nov 2022 12:15:08 +0100 Message-Id: <20221114111513.1436165-3-herve.codina@bootlin.com> X-Mailer: git-send-email 2.38.1 In-Reply-To: <20221114111513.1436165-1-herve.codina@bootlin.com> References: <20221114111513.1436165-1-herve.codina@bootlin.com> MIME-Version: 1.0 Precedence: bulk List-ID: X-Mailing-List: linux-renesas-soc@vger.kernel.org Add the h2mode property to force the USBs mode ie: - 2 hosts or - 1 host and 1 device Signed-off-by: Herve Codina Reviewed-by: Geert Uytterhoeven --- .../bindings/clock/renesas,r9a06g032-sysctrl.yaml | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/Documentation/devicetree/bindings/clock/renesas,r9a06g032-sysctrl.yaml b/Documentation/devicetree/bindings/clock/renesas,r9a06g032-sysctrl.yaml index 95bf485c6cec..f9e0a58aa4fb 100644 --- a/Documentation/devicetree/bindings/clock/renesas,r9a06g032-sysctrl.yaml +++ b/Documentation/devicetree/bindings/clock/renesas,r9a06g032-sysctrl.yaml @@ -39,6 +39,16 @@ properties: '#power-domain-cells': const: 0 + renesas,h2mode: + description: | + Configure the USBs mode. + - <0> : the USBs are in 1 host and 1 device mode. + - <1> : the USBs are in 2 host mode. + If the property is not present, the value used is the one already present + in the CFG_USB register (from reset or set by the bootloader). + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1] + '#address-cells': const: 1 From patchwork Mon Nov 14 11:15:09 2022 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Herve Codina X-Patchwork-Id: 13042130 X-Patchwork-Delegate: geert@linux-m68k.org Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id 90A5FC3E8A8 for ; Mon, 14 Nov 2022 11:18:38 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S236534AbiKNLS1 (ORCPT ); Mon, 14 Nov 2022 06:18:27 -0500 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:43084 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S236993AbiKNLRb (ORCPT ); Mon, 14 Nov 2022 06:17:31 -0500 Received: from relay3-d.mail.gandi.net (relay3-d.mail.gandi.net [IPv6:2001:4b98:dc4:8::223]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id AC6245585; Mon, 14 Nov 2022 03:15:35 -0800 (PST) Received: (Authenticated sender: herve.codina@bootlin.com) by mail.gandi.net (Postfix) with ESMTPA id A781C60015; Mon, 14 Nov 2022 11:15:31 +0000 (UTC) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=bootlin.com; s=gm1; t=1668424534; h=from:from:reply-to:subject:subject:date:date:message-id:message-id: to:to:cc:cc:mime-version:mime-version: content-transfer-encoding:content-transfer-encoding: in-reply-to:in-reply-to:references:references; bh=Rv0zLQImLa4WkJ4GwDBS+qU7R6NBbI82C3pfv4/EYHA=; b=oRxEg/Pwf9nu/cfmv5rnPFTPBTNLajBKT1eMW6J6TI4BH2ENRLtc+cVN/RDq5eUDgPT2u/ aNHw+ZpXRRunkrWCwiVLjjcF2xeKYsKFiSpg9Q6rXhs2pJmp4/ww2LrIyILkPJk7g9DbdE OK8OZRGP2EgfWlYaF0Hr7hS/68sG/WIA+uRUv08Ucn31S+2UPo5reLxfaf29pO9uziaJvJ 33eVxqbUDNRZm34t3phTTgcNk2bJYiRs4UrIFCa2cFlpVKFXGCwSHNXEarM2jPrCbOSNkN byBLAsGOYRYqT87X34hO/xG6K2+WUByrdMsegqk7OPVwy4RGHLSq35djikkaUQ== From: Herve Codina To: Geert Uytterhoeven , Michael Turquette , Stephen Boyd , Rob Herring , Krzysztof Kozlowski , Herve Codina , Greg Kroah-Hartman , Magnus Damm , Gareth Williams Cc: linux-renesas-soc@vger.kernel.org, linux-clk@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-usb@vger.kernel.org, Thomas Petazzoni , Miquel Raynal Subject: [PATCH v2 3/7] soc: renesas: r9a06g032-sysctrl: Handle h2mode device-tree property Date: Mon, 14 Nov 2022 12:15:09 +0100 Message-Id: <20221114111513.1436165-4-herve.codina@bootlin.com> X-Mailer: git-send-email 2.38.1 In-Reply-To: <20221114111513.1436165-1-herve.codina@bootlin.com> References: <20221114111513.1436165-1-herve.codina@bootlin.com> MIME-Version: 1.0 Precedence: bulk List-ID: X-Mailing-List: linux-renesas-soc@vger.kernel.org Handle the h2mode property and forces the CFG_USB[H2MODE] bit accordingly. Signed-off-by: Herve Codina Reviewed-by: Geert Uytterhoeven --- drivers/clk/renesas/r9a06g032-clocks.c | 21 +++++++++++++++++++++ 1 file changed, 21 insertions(+) diff --git a/drivers/clk/renesas/r9a06g032-clocks.c b/drivers/clk/renesas/r9a06g032-clocks.c index 9ee056498714..7a5a96c0d082 100644 --- a/drivers/clk/renesas/r9a06g032-clocks.c +++ b/drivers/clk/renesas/r9a06g032-clocks.c @@ -946,6 +946,7 @@ static int __init r9a06g032_clocks_probe(struct platform_device *pdev) struct clk *mclk; unsigned int i; u16 uart_group_sel[2]; + u32 usb, h2mode; int error; clocks = devm_kzalloc(dev, sizeof(*clocks), GFP_KERNEL); @@ -966,6 +967,26 @@ static int __init r9a06g032_clocks_probe(struct platform_device *pdev) clocks->reg = of_iomap(np, 0); if (WARN_ON(!clocks->reg)) return -ENOMEM; + + error = of_property_read_u32(np, "renesas,h2mode", &h2mode); + if (!error) { + usb = readl(clocks->reg + R9A06G032_SYSCTRL_USB); + switch (h2mode) { + case 0: + /* 1 host, 1 device */ + usb &= ~R9A06G032_SYSCTRL_USB_H2MODE; + break; + case 1: + /* 2 hosts */ + usb |= R9A06G032_SYSCTRL_USB_H2MODE; + break; + default: + dev_err(dev, "invalid h2mode %d\n", h2mode); + return -EINVAL; + } + writel(usb, clocks->reg + R9A06G032_SYSCTRL_USB); + } + for (i = 0; i < ARRAY_SIZE(r9a06g032_clocks); ++i) { const struct r9a06g032_clkdesc *d = &r9a06g032_clocks[i]; const char *parent_name = d->source ? From patchwork Mon Nov 14 11:15:10 2022 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Herve Codina X-Patchwork-Id: 13042133 X-Patchwork-Delegate: geert@linux-m68k.org Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id 5CB27C4332F for ; Mon, 14 Nov 2022 11:19:08 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S236557AbiKNLSg (ORCPT ); Mon, 14 Nov 2022 06:18:36 -0500 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:45012 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S235660AbiKNLRd (ORCPT ); Mon, 14 Nov 2022 06:17:33 -0500 Received: from relay3-d.mail.gandi.net (relay3-d.mail.gandi.net [217.70.183.195]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 424E85F59; Mon, 14 Nov 2022 03:15:38 -0800 (PST) Received: (Authenticated sender: herve.codina@bootlin.com) by mail.gandi.net (Postfix) with ESMTPA id 5021960004; Mon, 14 Nov 2022 11:15:35 +0000 (UTC) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=bootlin.com; s=gm1; t=1668424537; h=from:from:reply-to:subject:subject:date:date:message-id:message-id: to:to:cc:cc:mime-version:mime-version: content-transfer-encoding:content-transfer-encoding: in-reply-to:in-reply-to:references:references; bh=erW/gAS4dULA5JTOLl0FGx1bAeaHIYZy6jpj3FKM28s=; b=Bflxvrp7c3nXu/Kr/0hrFTO2EHZ6ONMIQHFqPMc6WfW5LqLxreWMhI06Bs4dUy8KaNlMfm wgmaHq2U6ke2q1OTwmGuWch9Szpe3BH7GS2k5wI7AISz/l+bkbbqoAnbRej7nSWpwjJlbq Yr7C7iURAgXf/wkGzILPKTRgfplwCLielX0wsfSAyKIsKTdmzD4Hc1zbnE9X8iautFNFzu MMg/TpWgAuh4KlFPT2YRC7UEgT2Qiv0eENyQTc+NXn6Hrx6QrqyQlbKyPguOgqujBN3Xnh qcFRQqcWWVZnnCRpP1JrSeI9Uo+tH1cu5p9lF2NwB8zjB7Vq2lobr1KachUFsQ== From: Herve Codina To: Geert Uytterhoeven , Michael Turquette , Stephen Boyd , Rob Herring , Krzysztof Kozlowski , Herve Codina , Greg Kroah-Hartman , Magnus Damm , Gareth Williams Cc: linux-renesas-soc@vger.kernel.org, linux-clk@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-usb@vger.kernel.org, Thomas Petazzoni , Miquel Raynal Subject: [PATCH v2 4/7] dt-bindings: usb: add the Renesas RZ/N1 USBF controller binding Date: Mon, 14 Nov 2022 12:15:10 +0100 Message-Id: <20221114111513.1436165-5-herve.codina@bootlin.com> X-Mailer: git-send-email 2.38.1 In-Reply-To: <20221114111513.1436165-1-herve.codina@bootlin.com> References: <20221114111513.1436165-1-herve.codina@bootlin.com> MIME-Version: 1.0 Precedence: bulk List-ID: X-Mailing-List: linux-renesas-soc@vger.kernel.org The Renesas RZ/N1 USBF controller is an USB2.0 device controller (UDC) available in the Renesas r9a06g032 SoC (RZ/N1 family). Signed-off-by: Herve Codina Reviewed-by: Krzysztof Kozlowski --- .../bindings/usb/renesas,rzn1-usbf.yaml | 68 +++++++++++++++++++ 1 file changed, 68 insertions(+) create mode 100644 Documentation/devicetree/bindings/usb/renesas,rzn1-usbf.yaml diff --git a/Documentation/devicetree/bindings/usb/renesas,rzn1-usbf.yaml b/Documentation/devicetree/bindings/usb/renesas,rzn1-usbf.yaml new file mode 100644 index 000000000000..b67e9cea2522 --- /dev/null +++ b/Documentation/devicetree/bindings/usb/renesas,rzn1-usbf.yaml @@ -0,0 +1,68 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/usb/renesas,rzn1-usbf.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Renesas RZ/N1 SoCs USBF (USB Function) controller binding + +description: | + The Renesas USBF controller is an USB2.0 device + controller (UDC). + +maintainers: + - Herve Codina + +properties: + compatible: + items: + - enum: + - renesas,r9a06g032-usbf + - const: renesas,rzn1-usbf + + reg: + maxItems: 1 + + clocks: + items: + - description: Internal bus clock (AHB) for Function + - description: Internal bus clock (AHB) for Power Management + + clock-names: + items: + - const: hclkf + - const: hclkpm + + power-domains: + maxItems: 1 + + interrupts: + items: + - description: The USBF EPC interrupt + - description: The USBF AHB-EPC interrupt + +required: + - compatible + - reg + - clocks + - clock-names + - power-domains + - interrupts + +additionalProperties: false + +examples: + - | + #include + #include + + usb@4001e000 { + compatible = "renesas,r9a06g032-usbf", "renesas,rzn1-usbf"; + reg = <0x4001e000 0x2000>; + interrupts = , + ; + clocks = <&sysctrl R9A06G032_HCLK_USBF>, + <&sysctrl R9A06G032_HCLK_USBPM>; + clock-names = "hclkf", "hclkpm"; + power-domains = <&sysctrl>; + }; From patchwork Mon Nov 14 11:15:11 2022 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Herve Codina X-Patchwork-Id: 13042131 X-Patchwork-Delegate: geert@linux-m68k.org Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id 2EC6DC3A5A3 for ; Mon, 14 Nov 2022 11:18:38 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S236353AbiKNLSX (ORCPT ); Mon, 14 Nov 2022 06:18:23 -0500 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:45082 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S236133AbiKNLRf (ORCPT ); Mon, 14 Nov 2022 06:17:35 -0500 Received: from relay3-d.mail.gandi.net (relay3-d.mail.gandi.net [217.70.183.195]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 9409462F8; Mon, 14 Nov 2022 03:15:43 -0800 (PST) Received: (Authenticated sender: herve.codina@bootlin.com) by mail.gandi.net (Postfix) with ESMTPA id 1A65C60005; Mon, 14 Nov 2022 11:15:38 +0000 (UTC) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=bootlin.com; s=gm1; t=1668424542; h=from:from:reply-to:subject:subject:date:date:message-id:message-id: to:to:cc:cc:mime-version:mime-version: content-transfer-encoding:content-transfer-encoding: in-reply-to:in-reply-to:references:references; bh=iksdqFBgyGHvN2DlNT1+aQkF7biXrxpIsK/EENgHTtk=; b=MSyUT5KwnMnSR7gD1tOJJZrqaX/TvUJkYtV73aoUw/MHUjEanhzo3DzqgCWzAUYUFolt0v LLYzAsLmN1xYadb1AFR+nzU6TrBvDiRbnC5JHFwiZP8MhufVcOLijx6qiSbmfTAyQPw061 k319QQ1wXSMbBh0foYXZjoSzxTYflSlAOc7Bi10F1MuIpC9ATLGzv050yeMSdrRamRMT+5 bBvokJbvMoJ2bnXC/5DGLNN4HxZc+zcebqbErelw0aVRXjwJcWIQrZHoo+aL1xg97YU9RZ NijOhuu3FLrKaWXibN6uuXqKJHGU/QW+X53SAsF69jAjr8MP0CdT8eUbgvA03A== From: Herve Codina To: Geert Uytterhoeven , Michael Turquette , Stephen Boyd , Rob Herring , Krzysztof Kozlowski , Herve Codina , Greg Kroah-Hartman , Magnus Damm , Gareth Williams Cc: linux-renesas-soc@vger.kernel.org, linux-clk@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-usb@vger.kernel.org, Thomas Petazzoni , Miquel Raynal Subject: [PATCH v2 5/7] usb: gadget: udc: add Renesas RZ/N1 USBF controller support Date: Mon, 14 Nov 2022 12:15:11 +0100 Message-Id: <20221114111513.1436165-6-herve.codina@bootlin.com> X-Mailer: git-send-email 2.38.1 In-Reply-To: <20221114111513.1436165-1-herve.codina@bootlin.com> References: <20221114111513.1436165-1-herve.codina@bootlin.com> MIME-Version: 1.0 Precedence: bulk List-ID: X-Mailing-List: linux-renesas-soc@vger.kernel.org Add support for the Renesas USBF controller. This controller is an USB2.0 UDC controller available in the Renesas r9a06g032 SoC (RZ/N1 family). Signed-off-by: Herve Codina --- drivers/usb/gadget/udc/Kconfig | 11 + drivers/usb/gadget/udc/Makefile | 1 + drivers/usb/gadget/udc/renesas_usbf.c | 3430 +++++++++++++++++++++++++ 3 files changed, 3442 insertions(+) create mode 100644 drivers/usb/gadget/udc/renesas_usbf.c diff --git a/drivers/usb/gadget/udc/Kconfig b/drivers/usb/gadget/udc/Kconfig index 5756acb07b8d..f856d2c61603 100644 --- a/drivers/usb/gadget/udc/Kconfig +++ b/drivers/usb/gadget/udc/Kconfig @@ -204,6 +204,17 @@ config USB_RENESAS_USB3 dynamically linked module called "renesas_usb3" and force all gadget drivers to also be dynamically linked. +config USB_RENESAS_USBF + tristate 'Renesas USB Function controller' + depends on ARCH_RENESAS || COMPILE_TEST + help + Renesas USB Function controller is a USB peripheral controller + available on RZ/N1 Renesas SoCs. + + Say "y" to link the driver statically, or "m" to build a + dynamically linked module called "renesas_usbf" and force all + gadget drivers to also be dynamically linked. + config USB_PXA27X tristate "PXA 27x" depends on HAS_IOMEM diff --git a/drivers/usb/gadget/udc/Makefile b/drivers/usb/gadget/udc/Makefile index 12f9e4c9eb0c..99a2221c0f8b 100644 --- a/drivers/usb/gadget/udc/Makefile +++ b/drivers/usb/gadget/udc/Makefile @@ -27,6 +27,7 @@ obj-$(CONFIG_USB_TEGRA_XUDC) += tegra-xudc.o obj-$(CONFIG_USB_M66592) += m66592-udc.o obj-$(CONFIG_USB_R8A66597) += r8a66597-udc.o obj-$(CONFIG_USB_RENESAS_USB3) += renesas_usb3.o +obj-$(CONFIG_USB_RENESAS_USBF) += renesas_usbf.o obj-$(CONFIG_USB_FSL_QE) += fsl_qe_udc.o obj-$(CONFIG_USB_S3C_HSUDC) += s3c-hsudc.o obj-$(CONFIG_USB_LPC32XX) += lpc32xx_udc.o diff --git a/drivers/usb/gadget/udc/renesas_usbf.c b/drivers/usb/gadget/udc/renesas_usbf.c new file mode 100644 index 000000000000..d43ed6626e8e --- /dev/null +++ b/drivers/usb/gadget/udc/renesas_usbf.c @@ -0,0 +1,3430 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Renesas USBF USB Function driver + * + * Copyright 2022 Schneider Electric + * Author: Herve Codina + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#ifdef DEBUG +#define TRACE(_fmt, ...) trace_printk("%s: " _fmt, __func__, ##__VA_ARGS__) +#define USBF_TRACE_EP_MASK 0x0ffff /* All the 16 endpoints */ +#define TRACEEP(_ep, _fmt, ...) \ + do { \ + if ((1 << (_ep)->id) & USBF_TRACE_EP_MASK) \ + trace_printk("%s: " _fmt, __func__, ##__VA_ARGS__); \ + } while (0) +#else +#define TRACE(_fmt, ...) do { } while (0) +#define TRACEEP(_ep, _fmt, ...) do { } while (0) +#endif + +#define USBF_NUM_ENDPOINTS 16 +#define USBF_EP0_MAX_PCKT_SIZE 64 + +/* EPC registers */ +#define USBF_REG_USB_CONTROL 0x000 +#define USBF_USB_PUE2 BIT(2) +#define USBF_USB_CONNECTB BIT(3) +#define USBF_USB_DEFAULT BIT(4) +#define USBF_USB_CONF BIT(5) +#define USBF_USB_SUSPEND BIT(6) +#define USBF_USB_RSUM_IN BIT(7) +#define USBF_USB_SOF_RCV BIT(8) +#define USBF_USB_FORCEFS BIT(9) +#define USBF_USB_INT_SEL BIT(10) +#define USBF_USB_SOF_CLK_MODE BIT(11) + +#define USBF_REG_USB_STATUS 0x004 +#define USBF_USB_RSUM_OUT BIT(1) +#define USBF_USB_SPND_OUT BIT(2) +#define USBF_USB_USB_RST BIT(3) +#define USBF_USB_DEFAULT_ST BIT(4) +#define USBF_USB_CONF_ST BIT(5) +#define USBF_USB_SPEED_MODE BIT(6) +#define USBF_USB_SOF_DELAY_STATUS BIT(31) + +#define USBF_REG_USB_ADDRESS 0x008 +#define USBF_USB_SOF_STATUS BIT(15) +#define USBF_USB_SET_USB_ADDR(_a) ((_a) << 16) +#define USBF_USB_GET_FRAME(_r) ((_r) & 0x7FF) + +#define USBF_REG_SETUP_DATA0 0x018 +#define USBF_REG_SETUP_DATA1 0x01C +#define USBF_REG_USB_INT_STA 0x020 +#define USBF_USB_RSUM_INT BIT(1) +#define USBF_USB_SPND_INT BIT(2) +#define USBF_USB_USB_RST_INT BIT(3) +#define USBF_USB_SOF_INT BIT(4) +#define USBF_USB_SOF_ERROR_INT BIT(5) +#define USBF_USB_SPEED_MODE_INT BIT(6) +#define USBF_USB_EPN_INT(_n) (BIT(8) << (_n)) /* n=0..15 */ + +#define USBF_REG_USB_INT_ENA 0x024 +#define USBF_USB_RSUM_EN BIT(1) +#define USBF_USB_SPND_EN BIT(2) +#define USBF_USB_USB_RST_EN BIT(3) +#define USBF_USB_SOF_EN BIT(4) +#define USBF_USB_SOF_ERROR_EN BIT(5) +#define USBF_USB_SPEED_MODE_EN BIT(6) +#define USBF_USB_EPN_EN(_n) (BIT(8) << (_n)) /* n=0..15 */ + +#define USBF_BASE_EP0 0x028 +/* EP0 registers offsets from Base + USBF_BASE_EP0 (EP0 regs area) */ +#define USBF_REG_EP0_CONTROL 0x00 +#define USBF_EP0_ONAK BIT(0) +#define USBF_EP0_INAK BIT(1) +#define USBF_EP0_STL BIT(2) +#define USBF_EP0_PERR_NAK_CLR BIT(3) +#define USBF_EP0_INAK_EN BIT(4) +#define USBF_EP0_DW_MASK (0x3 << 5) +#define USBF_EP0_DW(_s) ((_s) << 5) +#define USBF_EP0_DEND BIT(7) +#define USBF_EP0_BCLR BIT(8) +#define USBF_EP0_PIDCLR BIT(9) +#define USBF_EP0_AUTO BIT(16) +#define USBF_EP0_OVERSEL BIT(17) +#define USBF_EP0_STGSEL BIT(18) + +#define USBF_REG_EP0_STATUS 0x04 +#define USBF_EP0_SETUP_INT BIT(0) +#define USBF_EP0_STG_START_INT BIT(1) +#define USBF_EP0_STG_END_INT BIT(2) +#define USBF_EP0_STALL_INT BIT(3) +#define USBF_EP0_IN_INT BIT(4) +#define USBF_EP0_OUT_INT BIT(5) +#define USBF_EP0_OUT_OR_INT BIT(6) +#define USBF_EP0_OUT_NULL_INT BIT(7) +#define USBF_EP0_IN_EMPTY BIT(8) +#define USBF_EP0_IN_FULL BIT(9) +#define USBF_EP0_IN_DATA BIT(10) +#define USBF_EP0_IN_NAK_INT BIT(11) +#define USBF_EP0_OUT_EMPTY BIT(12) +#define USBF_EP0_OUT_FULL BIT(13) +#define USBF_EP0_OUT_NULL BIT(14) +#define USBF_EP0_OUT_NAK_INT BIT(15) +#define USBF_EP0_PERR_NAK_INT BIT(16) +#define USBF_EP0_PERR_NAK BIT(17) +#define USBF_EP0_PID BIT(18) + +#define USBF_REG_EP0_INT_ENA 0x08 +#define USBF_EP0_SETUP_EN BIT(0) +#define USBF_EP0_STG_START_EN BIT(1) +#define USBF_EP0_STG_END_EN BIT(2) +#define USBF_EP0_STALL_EN BIT(3) +#define USBF_EP0_IN_EN BIT(4) +#define USBF_EP0_OUT_EN BIT(5) +#define USBF_EP0_OUT_OR_EN BIT(6) +#define USBF_EP0_OUT_NULL_EN BIT(7) +#define USBF_EP0_IN_NAK_EN BIT(11) +#define USBF_EP0_OUT_NAK_EN BIT(15) +#define USBF_EP0_PERR_NAK_EN BIT(16) + +#define USBF_REG_EP0_LENGTH 0x0C +#define USBF_EP0_LDATA (0x7FF << 0) +#define USBF_REG_EP0_READ 0x10 +#define USBF_REG_EP0_WRITE 0x14 + +#define USBF_BASE_EPN(_n) (0x040 + (_n) * 0x020) +/* EPn registers offsets from Base + USBF_BASE_EPN(n-1). n=1..15 */ +#define USBF_REG_EPN_CONTROL 0x000 +#define USBF_EPN_ONAK BIT(0) +#define USBF_EPN_OSTL BIT(2) +#define USBF_EPN_ISTL BIT(3) +#define USBF_EPN_OSTL_EN BIT(4) +#define USBF_EPN_DW_MASK (0x3 << 5) +#define USBF_EPN_DW(_s) ((_s) << 5) +#define USBF_EPN_DEND BIT(7) +#define USBF_EPN_CBCLR BIT(8) +#define USBF_EPN_BCLR BIT(9) +#define USBF_EPN_OPIDCLR BIT(10) +#define USBF_EPN_IPIDCLR BIT(11) +#define USBF_EPN_AUTO BIT(16) +#define USBF_EPN_OVERSEL BIT(17) +#define USBF_EPN_MODE_MASK (0x3 << 24) +#define USBF_EPN_MODE_BULK (0x0 << 24) +#define USBF_EPN_MODE_INTR (0x1 << 24) +#define USBF_EPN_MODE_ISO (0x2 << 24) +#define USBF_EPN_DIR0 BIT(26) +#define USBF_EPN_BUF_TYPE_DOUBLE BIT(30) +#define USBF_EPN_EN BIT(31) + +#define USBF_REG_EPN_STATUS 0x004 +#define USBF_EPN_IN_EMPTY BIT(0) +#define USBF_EPN_IN_FULL BIT(1) +#define USBF_EPN_IN_DATA BIT(2) +#define USBF_EPN_IN_INT BIT(3) +#define USBF_EPN_IN_STALL_INT BIT(4) +#define USBF_EPN_IN_NAK_ERR_INT BIT(5) +#define USBF_EPN_IN_END_INT BIT(7) +#define USBF_EPN_IPID BIT(10) +#define USBF_EPN_OUT_EMPTY BIT(16) +#define USBF_EPN_OUT_FULL BIT(17) +#define USBF_EPN_OUT_NULL_INT BIT(18) +#define USBF_EPN_OUT_INT BIT(19) +#define USBF_EPN_OUT_STALL_INT BIT(20) +#define USBF_EPN_OUT_NAK_ERR_INT BIT(21) +#define USBF_EPN_OUT_OR_INT BIT(22) +#define USBF_EPN_OUT_END_INT BIT(23) +#define USBF_EPN_ISO_CRC BIT(24) +#define USBF_EPN_ISO_OR BIT(26) +#define USBF_EPN_OUT_NOTKN BIT(27) +#define USBF_EPN_ISO_OPID BIT(28) +#define USBF_EPN_ISO_PIDERR BIT(29) + +#define USBF_REG_EPN_INT_ENA 0x008 +#define USBF_EPN_IN_EN BIT(3) +#define USBF_EPN_IN_STALL_EN BIT(4) +#define USBF_EPN_IN_NAK_ERR_EN BIT(5) +#define USBF_EPN_IN_END_EN BIT(7) +#define USBF_EPN_OUT_NULL_EN BIT(18) +#define USBF_EPN_OUT_EN BIT(19) +#define USBF_EPN_OUT_STALL_EN BIT(20) +#define USBF_EPN_OUT_NAK_ERR_EN BIT(21) +#define USBF_EPN_OUT_OR_EN BIT(22) +#define USBF_EPN_OUT_END_EN BIT(23) + +#define USBF_REG_EPN_DMA_CTRL 0x00C +#define USBF_EPN_DMAMODE0 BIT(0) +#define USBF_EPN_DMA_EN BIT(4) +#define USBF_EPN_STOP_SET BIT(8) +#define USBF_EPN_BURST_SET BIT(9) +#define USBF_EPN_DEND_SET BIT(10) +#define USBF_EPN_STOP_MODE BIT(11) + +#define USBF_REG_EPN_PCKT_ADRS 0x010 +#define USBF_EPN_MPKT(_l) ((_l) << 0) +#define USBF_EPN_BASEAD(_a) ((_a) << 16) + +#define USBF_REG_EPN_LEN_DCNT 0x014 +#define USBF_EPN_GET_LDATA(_r) ((_r) & 0x7FF) +#define USBF_EPN_SET_DMACNT(_c) ((_c) << 16) +#define USBF_EPN_GET_DMACNT(_r) (((_r) >> 16) & 0x1ff) + +#define USBF_REG_EPN_READ 0x018 +#define USBF_REG_EPN_WRITE 0x01C + +/* AHB-EPC Bridge registers */ +#define USBF_REG_AHBSCTR 0x1000 +#define USBF_REG_AHBMCTR 0x1004 +#define USBF_SYS_WBURST_TYPE BIT(2) +#define USBF_SYS_ARBITER_CTR BIT(31) + +#define USBF_REG_AHBBINT 0x1008 +#define USBF_SYS_ERR_MASTER (0x0F << 0) +#define USBF_SYS_SBUS_ERRINT0 BIT(4) +#define USBF_SYS_SBUS_ERRINT1 BIT(5) +#define USBF_SYS_MBUS_ERRINT BIT(6) +#define USBF_SYS_VBUS_INT BIT(13) +#define USBF_SYS_DMA_ENDINT_EPN(_n) (BIT(16) << (_n)) /* _n=1..15 */ + +#define USBF_REG_AHBBINTEN 0x100C +#define USBF_SYS_SBUS_ERRINT0EN BIT(4) +#define USBF_SYS_SBUS_ERRINT1EN BIT(5) +#define USBF_SYS_MBUS_ERRINTEN BIT(6) +#define USBF_SYS_VBUS_INTEN BIT(13) +#define USBF_SYS_DMA_ENDINTEN_EPN(_n) (BIT(16) << (_n)) /* _n=1..15 */ + +#define USBF_REG_EPCTR 0x1010 +#define USBF_SYS_EPC_RST BIT(0) +#define USBF_SYS_PLL_RST BIT(2) +#define USBF_SYS_PLL_LOCK BIT(4) +#define USBF_SYS_PLL_RESUME BIT(5) +#define USBF_SYS_VBUS_LEVEL BIT(8) +#define USBF_SYS_DIRPD BIT(12) + +#define USBF_REG_USBSSVER 0x1020 +#define USBF_REG_USBSSCONF 0x1024 +#define USBF_SYS_DMA_AVAILABLE(_n) (BIT(0) << (_n)) /* _n=0..15 */ +#define USBF_SYS_EP_AVAILABLE(_n) (BIT(16) << (_n)) /* _n=0..15 */ + +#define USBF_BASE_DMA_EPN(_n) (0x1110 + (_n) * 0x010) +/* EPn DMA registers offsets from Base USBF_BASE_DMA_EPN(n-1). n=1..15*/ +#define USBF_REG_DMA_EPN_DCR1 0x00 +#define USBF_SYS_EPN_REQEN BIT(0) +#define USBF_SYS_EPN_DIR0 BIT(1) +#define USBF_SYS_EPN_SET_DMACNT(_c) ((_c) << 16) +#define USBF_SYS_EPN_GET_DMACNT(_r) (((_r) >> 16) & 0x0FF) + +#define USBF_REG_DMA_EPN_DCR2 0x04 +#define USBF_SYS_EPN_MPKT(_s) ((_s) << 0) +#define USBF_SYS_EPN_LMPKT(_l) ((_l) << 16) + +#define USBF_REG_DMA_EPN_TADR 0x08 + +/* USB request */ +struct usbf_req { + struct usb_request req; + struct list_head queue; + unsigned int is_zero_sent : 1; + unsigned int is_mapped : 1; + enum { + USBF_XFER_START, + USBF_XFER_WAIT_DMA, + USBF_XFER_SEND_NULL, + USBF_XFER_WAIT_END, + USBF_XFER_WAIT_DMA_SHORT, + USBF_XFER_WAIT_BRIDGE, + } xfer_step; + size_t dma_size; +}; + +/* USB Endpoint */ +struct usbf_ep { + struct usb_ep ep; + char name[32]; + struct list_head queue; + int is_processing : 1; + int is_in : 1; + struct usbf_udc *udc; + void __iomem *regs; + void __iomem *dma_regs; + unsigned id : 8; + unsigned disabled : 1; + unsigned is_wedged : 1; + unsigned delayed_status : 1; + u32 status; + void (*bridge_on_dma_end)(struct usbf_ep *ep); +}; + +enum usbf_ep0state { + EP0_IDLE, + EP0_IN_DATA_PHASE, + EP0_OUT_DATA_PHASE, + EP0_OUT_STATUS_START_PHASE, + EP0_OUT_STATUS_PHASE, + EP0_OUT_STATUS_END_PHASE, + EP0_IN_STATUS_START_PHASE, + EP0_IN_STATUS_PHASE, + EP0_IN_STATUS_END_PHASE, +}; + +struct usbf_udc { + struct usb_gadget gadget; + struct usb_gadget_driver *driver; + struct device *dev; + void __iomem *regs; + spinlock_t lock; + bool is_remote_wakeup; + bool is_usb_suspended; + struct usbf_ep ep[USBF_NUM_ENDPOINTS]; + /* for EP0 control messages */ + enum usbf_ep0state ep0state; + struct usbf_req setup_reply; + u8 ep0_buf[USBF_EP0_MAX_PCKT_SIZE]; +}; + +struct usbf_ep_info { + const char *name; + struct usb_ep_caps caps; + u16 base_addr; + int is_double : 1; + u16 maxpacket_limit; +}; + +#define USBF_SINGLE_BUFFER 0 +#define USBF_DOUBLE_BUFFER 1 +#define USBF_EP_INFO(_name, _caps, _base_addr, _is_double, _maxpacket_limit) \ + { \ + .name = _name, \ + .caps = _caps, \ + .base_addr = _base_addr, \ + .is_double = _is_double, \ + .maxpacket_limit = _maxpacket_limit, \ + } + +/* This table is computed from the recommended values provided in the SOC + * datasheet. The buffer type (single/double) and the endpoint type cannot + * be changed. The mapping in internal RAM (base_addr and number of words) + * for each endpoints depends on the max packet size and the buffer type. + */ +static const struct usbf_ep_info usbf_ep_info[USBF_NUM_ENDPOINTS] = { + /* ep0: buf @0x0000 64 bytes, fixed 32 words */ + [0] = USBF_EP_INFO("ep0-ctrl", + USB_EP_CAPS(USB_EP_CAPS_TYPE_CONTROL, + USB_EP_CAPS_DIR_ALL), + 0x0000, USBF_SINGLE_BUFFER, USBF_EP0_MAX_PCKT_SIZE), + /* ep1: buf @0x0020, 2 buffers 512 bytes -> (512 * 2 / 4) words */ + [1] = USBF_EP_INFO("ep1-bulk", + USB_EP_CAPS(USB_EP_CAPS_TYPE_BULK, + USB_EP_CAPS_DIR_ALL), + 0x0020, USBF_DOUBLE_BUFFER, 512), + /* ep2: buf @0x0120, 2 buffers 512 bytes -> (512 * 2 / 4) words */ + [2] = USBF_EP_INFO("ep2-bulk", + USB_EP_CAPS(USB_EP_CAPS_TYPE_BULK, + USB_EP_CAPS_DIR_ALL), + 0x0120, USBF_DOUBLE_BUFFER, 512), + /* ep3: buf @0x0220, 1 buffer 512 bytes -> (512 * 2 / 4) words */ + [3] = USBF_EP_INFO("ep3-bulk", + USB_EP_CAPS(USB_EP_CAPS_TYPE_BULK, + USB_EP_CAPS_DIR_ALL), + 0x0220, USBF_SINGLE_BUFFER, 512), + /* ep4: buf @0x02A0, 1 buffer 512 bytes -> (512 * 1 / 4) words */ + [4] = USBF_EP_INFO("ep4-bulk", + USB_EP_CAPS(USB_EP_CAPS_TYPE_BULK, + USB_EP_CAPS_DIR_ALL), + 0x02A0, USBF_SINGLE_BUFFER, 512), + /* ep5: buf @0x0320, 1 buffer 512 bytes -> (512 * 2 / 4) words */ + [5] = USBF_EP_INFO("ep5-bulk", + USB_EP_CAPS(USB_EP_CAPS_TYPE_BULK, + USB_EP_CAPS_DIR_ALL), + 0x0320, USBF_SINGLE_BUFFER, 512), + /* ep6: buf @0x03A0, 1 buffer 1024 bytes -> (1024 * 1 / 4) words */ + [6] = USBF_EP_INFO("ep6-int", + USB_EP_CAPS(USB_EP_CAPS_TYPE_INT, + USB_EP_CAPS_DIR_ALL), + 0x03A0, USBF_SINGLE_BUFFER, 1024), + /* ep7: buf @0x04A0, 1 buffer 1024 bytes -> (1024 * 1 / 4) words */ + [7] = USBF_EP_INFO("ep7-int", + USB_EP_CAPS(USB_EP_CAPS_TYPE_INT, + USB_EP_CAPS_DIR_ALL), + 0x04A0, USBF_SINGLE_BUFFER, 1024), + /* ep8: buf @0x0520, 1 buffer 1024 bytes -> (1024 * 1 / 4) words */ + [8] = USBF_EP_INFO("ep8-int", + USB_EP_CAPS(USB_EP_CAPS_TYPE_INT, + USB_EP_CAPS_DIR_ALL), + 0x0520, USBF_SINGLE_BUFFER, 1024), + /* ep9: buf @0x0620, 1 buffer 1024 bytes -> (1024 * 1 / 4) words */ + [9] = USBF_EP_INFO("ep9-int", + USB_EP_CAPS(USB_EP_CAPS_TYPE_INT, + USB_EP_CAPS_DIR_ALL), + 0x0620, USBF_SINGLE_BUFFER, 1024), + /* ep10: buf @0x0720, 2 buffers 1024 bytes -> (1024 * 2 / 4) words */ + [10] = USBF_EP_INFO("ep10-iso", + USB_EP_CAPS(USB_EP_CAPS_TYPE_ISO, + USB_EP_CAPS_DIR_ALL), + 0x0720, USBF_DOUBLE_BUFFER, 1024), + /* ep11: buf @0x0920, 2 buffers 1024 bytes -> (1024 * 2 / 4) words */ + [11] = USBF_EP_INFO("ep11-iso", + USB_EP_CAPS(USB_EP_CAPS_TYPE_ISO, + USB_EP_CAPS_DIR_ALL), + 0x0920, USBF_DOUBLE_BUFFER, 1024), + /* ep12: buf @0x0B20, 2 buffers 1024 bytes -> (1024 * 2 / 4) words */ + [12] = USBF_EP_INFO("ep12-iso", + USB_EP_CAPS(USB_EP_CAPS_TYPE_ISO, + USB_EP_CAPS_DIR_ALL), + 0x0B20, USBF_DOUBLE_BUFFER, 1024), + /* ep13: buf @0x0D20, 2 buffers 1024 bytes -> (1024 * 2 / 4) words */ + [13] = USBF_EP_INFO("ep13-iso", + USB_EP_CAPS(USB_EP_CAPS_TYPE_ISO, + USB_EP_CAPS_DIR_ALL), + 0x0D20, USBF_DOUBLE_BUFFER, 1024), + /* ep14: buf @0x0F20, 2 buffers 1024 bytes -> (1024 * 2 / 4) words */ + [14] = USBF_EP_INFO("ep14-iso", + USB_EP_CAPS(USB_EP_CAPS_TYPE_ISO, + USB_EP_CAPS_DIR_ALL), + 0x0F20, USBF_DOUBLE_BUFFER, 1024), + /* ep15: buf @0x1120, 2 buffers 1024 bytes -> (1024 * 2 / 4) words */ + [15] = USBF_EP_INFO("ep15-iso", + USB_EP_CAPS(USB_EP_CAPS_TYPE_ISO, + USB_EP_CAPS_DIR_ALL), + 0x1120, USBF_DOUBLE_BUFFER, 1024), +}; + +static inline u32 usbf_reg_readl(struct usbf_udc *udc, uint offset) +{ + return readl(udc->regs + offset); +} + +static inline void usbf_reg_writel(struct usbf_udc *udc, uint offset, u32 val) +{ + writel(val, udc->regs + offset); +} + +static inline void usbf_reg_bitset(struct usbf_udc *udc, uint offset, u32 set) +{ + u32 tmp; + + tmp = usbf_reg_readl(udc, offset); + tmp |= set; + usbf_reg_writel(udc, offset, tmp); +} + +static inline void usbf_reg_bitclr(struct usbf_udc *udc, uint offset, u32 clr) +{ + u32 tmp; + + tmp = usbf_reg_readl(udc, offset); + tmp &= ~clr; + usbf_reg_writel(udc, offset, tmp); +} + +static inline void usbf_reg_clrset(struct usbf_udc *udc, uint offset, + u32 clr, u32 set) +{ + u32 tmp; + + tmp = usbf_reg_readl(udc, offset); + tmp &= ~clr; + tmp |= set; + usbf_reg_writel(udc, offset, tmp); +} + +static inline u32 usbf_ep_reg_readl(struct usbf_ep *ep, uint offset) +{ + return readl(ep->regs + offset); +} + +static inline void usbf_ep_reg_read_rep(struct usbf_ep *ep, uint offset, + void *dst, uint count) +{ + readsl(ep->regs + offset, dst, count); +} + +static inline void usbf_ep_reg_writel(struct usbf_ep *ep, uint offset, u32 val) +{ + writel(val, ep->regs + offset); +} + +static inline void usbf_ep_reg_write_rep(struct usbf_ep *ep, uint offset, + const void *src, uint count) +{ + writesl(ep->regs + offset, src, count); +} + +static inline void usbf_ep_reg_bitset(struct usbf_ep *ep, uint offset, u32 set) +{ + u32 tmp; + + tmp = usbf_ep_reg_readl(ep, offset); + tmp |= set; + usbf_ep_reg_writel(ep, offset, tmp); +} + +static inline void usbf_ep_reg_bitclr(struct usbf_ep *ep, uint offset, u32 clr) +{ + u32 tmp; + + tmp = usbf_ep_reg_readl(ep, offset); + tmp &= ~clr; + usbf_ep_reg_writel(ep, offset, tmp); +} + +static inline void usbf_ep_reg_clrset(struct usbf_ep *ep, uint offset, + u32 clr, u32 set) +{ + u32 tmp; + + tmp = usbf_ep_reg_readl(ep, offset); + tmp &= ~clr; + tmp |= set; + usbf_ep_reg_writel(ep, offset, tmp); +} + +static inline u32 usbf_ep_dma_reg_readl(struct usbf_ep *ep, uint offset) +{ + return readl(ep->dma_regs + offset); +} + +static inline void usbf_ep_dma_reg_writel(struct usbf_ep *ep, uint offset, + u32 val) +{ + writel(val, ep->dma_regs + offset); +} + +static inline void usbf_ep_dma_reg_bitset(struct usbf_ep *ep, uint offset, + u32 set) +{ + u32 tmp; + + tmp = usbf_ep_dma_reg_readl(ep, offset); + tmp |= set; + usbf_ep_dma_reg_writel(ep, offset, tmp); +} + +static inline void usbf_ep_dma_reg_bitclr(struct usbf_ep *ep, uint offset, + u32 clr) +{ + u32 tmp; + + tmp = usbf_ep_dma_reg_readl(ep, offset); + tmp &= ~clr; + usbf_ep_dma_reg_writel(ep, offset, tmp); +} + +static inline void usbf_ep_dma_reg_clrset(struct usbf_ep *ep, uint offset, + u32 clr, u32 set) +{ + u32 tmp; + + tmp = usbf_ep_dma_reg_readl(ep, offset); + tmp &= ~clr; + tmp |= set; + usbf_ep_dma_reg_writel(ep, offset, tmp); +} + +static void usbf_ep0_send_null(struct usbf_ep *ep0, bool is_data1) +{ + u32 set; + + set = USBF_EP0_DEND; + if (is_data1) + set |= USBF_EP0_PIDCLR; + + usbf_ep_reg_bitset(ep0, USBF_REG_EP0_CONTROL, set); +} + +static int usbf_ep0_pio_in(struct usbf_ep *ep0, struct usbf_req *req) +{ + unsigned int left; + unsigned int nb; + const void *buf; + u32 ctrl; + u32 last; + + left = req->req.length - req->req.actual; + + if (left == 0) { + if (!req->is_zero_sent) { + if (req->req.length == 0) { + TRACEEP(ep0, "send null\n"); + usbf_ep0_send_null(ep0, false); + req->is_zero_sent = 1; + return -EINPROGRESS; + } + if ((req->req.actual % ep0->ep.maxpacket) == 0) { + if (req->req.zero) { + TRACEEP(ep0, "send null\n"); + usbf_ep0_send_null(ep0, false); + req->is_zero_sent = 1; + return -EINPROGRESS; + } + } + } + return 0; + } + + if (left > ep0->ep.maxpacket) + left = ep0->ep.maxpacket; + + buf = req->req.buf; + buf += req->req.actual; + + nb = left / sizeof(u32); + if (nb) { + usbf_ep_reg_write_rep(ep0, USBF_REG_EP0_WRITE, buf, nb); + buf += (nb * sizeof(u32)); + req->req.actual += (nb * sizeof(u32)); + left -= (nb * sizeof(u32)); + } + ctrl = usbf_ep_reg_readl(ep0, USBF_REG_EP0_CONTROL); + ctrl &= ~USBF_EP0_DW_MASK; + if (left) { + memcpy(&last, buf, left); + usbf_ep_reg_writel(ep0, USBF_REG_EP0_WRITE, last); + ctrl |= USBF_EP0_DW(left); + req->req.actual += left; + } + usbf_ep_reg_writel(ep0, USBF_REG_EP0_CONTROL, ctrl | USBF_EP0_DEND); + + TRACEEP(ep0, "send %u/%u\n", req->req.actual, req->req.length); + + return -EINPROGRESS; +} + +static int usbf_ep0_pio_out(struct usbf_ep *ep0, struct usbf_req *req) +{ + int req_status = 0; + unsigned int count; + unsigned int recv; + unsigned int left; + unsigned int nb; + void *buf; + u32 last; + + if (ep0->status & USBF_EP0_OUT_INT) { + recv = usbf_ep_reg_readl(ep0, USBF_REG_EP0_LENGTH) & USBF_EP0_LDATA; + count = recv; + + buf = req->req.buf; + buf += req->req.actual; + + left = req->req.length - req->req.actual; + + TRACEEP(ep0, "recv %u, left %u\n", count, left); + + if (left > ep0->ep.maxpacket) + left = ep0->ep.maxpacket; + + if (count > left) { + req_status = -EOVERFLOW; + count = left; + } + + if (count) { + nb = count / sizeof(u32); + if (nb) { + usbf_ep_reg_read_rep(ep0, USBF_REG_EP0_READ, + buf, nb); + buf += (nb * sizeof(u32)); + req->req.actual += (nb * sizeof(u32)); + count -= (nb * sizeof(u32)); + } + if (count) { + last = usbf_ep_reg_readl(ep0, USBF_REG_EP0_READ); + memcpy(buf, &last, count); + req->req.actual += count; + } + } + TRACEEP(ep0, "recv %u/%u\n", req->req.actual, req->req.length); + + if (req_status) { + TRACEEP(ep0, "req.status=%d\n", req_status); + req->req.status = req_status; + return 0; + } + + if (recv < ep0->ep.maxpacket) { + TRACEEP(ep0, "short packet\n"); + /* This is a short packet -> It is the end */ + req->req.status = 0; + return 0; + } + + /* The Data stage of a control transfer from an endpoint to the + * host is complete when the endpoint does one of the following: + * - Has transferred exactly the expected amount of data + * - Transfers a packet with a payload size less than + * wMaxPacketSize or transfers a zero-length packet + */ + if (req->req.actual == req->req.length) { + req->req.status = 0; + return 0; + } + } + + if (ep0->status & USBF_EP0_OUT_NULL_INT) { + /* NULL packet received */ + TRACEEP(ep0, "null packet\n"); + if (req->req.actual != req->req.length) { + req->req.status = req->req.short_not_ok ? + -EREMOTEIO : 0; + } else { + req->req.status = 0; + } + return 0; + } + + return -EINPROGRESS; +} + +static void usbf_ep0_fifo_flush(struct usbf_ep *ep0) +{ + u32 sts; + int ret; + + usbf_ep_reg_bitset(ep0, USBF_REG_EP0_CONTROL, USBF_EP0_BCLR); + + ret = readl_poll_timeout_atomic(ep0->regs + USBF_REG_EP0_STATUS, sts, + (sts & (USBF_EP0_IN_DATA | USBF_EP0_IN_EMPTY)) == USBF_EP0_IN_EMPTY, + 0, 10000); + if (ret) + dev_err(ep0->udc->dev, "ep0 flush fifo timed out\n"); + +} + +static void usbf_epn_send_null(struct usbf_ep *epn) +{ + usbf_ep_reg_bitset(epn, USBF_REG_EPN_CONTROL, USBF_EPN_DEND); +} + +static void usbf_epn_send_residue(struct usbf_ep *epn, const void *buf, + unsigned int size) +{ + u32 tmp; + + memcpy(&tmp, buf, size); + usbf_ep_reg_writel(epn, USBF_REG_EPN_WRITE, tmp); + + usbf_ep_reg_clrset(epn, USBF_REG_EPN_CONTROL, + USBF_EPN_DW_MASK, + USBF_EPN_DW(size) | USBF_EPN_DEND); +} + +static int usbf_epn_pio_in(struct usbf_ep *epn, struct usbf_req *req) +{ + unsigned int left; + unsigned int nb; + const void *buf; + + left = req->req.length - req->req.actual; + + if (left == 0) { + if (!req->is_zero_sent) { + if (req->req.length == 0) { + TRACEEP(epn, "ep%d send_null\n", epn->id); + usbf_epn_send_null(epn); + req->is_zero_sent = 1; + return -EINPROGRESS; + } + if ((req->req.actual % epn->ep.maxpacket) == 0) { + if (req->req.zero) { + TRACEEP(epn, "ep%d send_null\n", + epn->id); + usbf_epn_send_null(epn); + req->is_zero_sent = 1; + return -EINPROGRESS; + } + } + } + return 0; + } + + if (left > epn->ep.maxpacket) + left = epn->ep.maxpacket; + + buf = req->req.buf; + buf += req->req.actual; + + nb = left / sizeof(u32); + if (nb) { + usbf_ep_reg_write_rep(epn, USBF_REG_EPN_WRITE, buf, nb); + buf += (nb * sizeof(u32)); + req->req.actual += (nb * sizeof(u32)); + left -= (nb * sizeof(u32)); + } + + if (left) { + usbf_epn_send_residue(epn, buf, left); + req->req.actual += left; + } else { + usbf_ep_reg_clrset(epn, USBF_REG_EPN_CONTROL, + USBF_EPN_DW_MASK, + USBF_EPN_DEND); + } + + TRACEEP(epn, "ep%d send %u/%u\n", epn->id, req->req.actual, + req->req.length); + + return -EINPROGRESS; +} + +static void usbf_epn_enable_in_end_int(struct usbf_ep *epn) +{ + usbf_ep_reg_bitset(epn, USBF_REG_EPN_INT_ENA, USBF_EPN_IN_END_EN); +} + +static int usbf_epn_dma_in(struct usbf_ep *epn, struct usbf_req *req) +{ + unsigned int left; + u32 npkt; + u32 lastpkt; + int ret; + + if (!IS_ALIGNED((uintptr_t)req->req.buf, 4)) { + TRACEEP(epn, "ep%d buf unaligned -> fallback pio\n", epn->id); + return usbf_epn_pio_in(epn, req); + } + + left = req->req.length - req->req.actual; + + switch (req->xfer_step) { + default: + case USBF_XFER_START: + if (left == 0) { + TRACEEP(epn, "ep%d send null\n", epn->id); + usbf_epn_send_null(epn); + req->xfer_step = USBF_XFER_WAIT_END; + break; + } + if (left < 4) { + TRACEEP(epn, "ep%d send residue %u\n", epn->id, left); + usbf_epn_send_residue(epn, + req->req.buf + req->req.actual, left); + req->req.actual += left; + req->xfer_step = USBF_XFER_WAIT_END; + break; + } + + ret = usb_gadget_map_request(&epn->udc->gadget, &req->req, 1); + if (ret < 0) { + dev_err(epn->udc->dev, "usb_gadget_map_request failed (%d)\n", + ret); + return ret; + } + req->is_mapped = 1; + + npkt = DIV_ROUND_UP(left, epn->ep.maxpacket); + lastpkt = (left % epn->ep.maxpacket); + if (lastpkt == 0) + lastpkt = epn->ep.maxpacket; + lastpkt &= ~0x3; /* DMA is done on 32bit units */ + + usbf_ep_dma_reg_writel(epn, USBF_REG_DMA_EPN_DCR2, + USBF_SYS_EPN_MPKT(epn->ep.maxpacket) | USBF_SYS_EPN_LMPKT(lastpkt)); + usbf_ep_dma_reg_writel(epn, USBF_REG_DMA_EPN_TADR, + req->req.dma); + usbf_ep_dma_reg_writel(epn, USBF_REG_DMA_EPN_DCR1, + USBF_SYS_EPN_SET_DMACNT(npkt)); + usbf_ep_dma_reg_bitset(epn, USBF_REG_DMA_EPN_DCR1, + USBF_SYS_EPN_REQEN); + + usbf_ep_reg_writel(epn, USBF_REG_EPN_LEN_DCNT, USBF_EPN_SET_DMACNT(npkt)); + + usbf_ep_reg_bitset(epn, USBF_REG_EPN_CONTROL, USBF_EPN_AUTO); + + /* The end of DMA transfer at the USBF level needs to be handle + * after the detection of the end of DMA transfer at the brige + * level. + * To force this sequence, EPN_IN_END_EN will be set by the + * detection of the end of transfer at bridge level (ie. bridge + * interrupt). + */ + usbf_ep_reg_bitclr(epn, USBF_REG_EPN_INT_ENA, + USBF_EPN_IN_EN | USBF_EPN_IN_END_EN); + epn->bridge_on_dma_end = usbf_epn_enable_in_end_int; + + /* Clear any pending IN_END interrupt */ + usbf_ep_reg_writel(epn, USBF_REG_EPN_STATUS, ~(u32)USBF_EPN_IN_END_INT); + + usbf_ep_reg_writel(epn, USBF_REG_EPN_DMA_CTRL, + USBF_EPN_BURST_SET | USBF_EPN_DMAMODE0); + usbf_ep_reg_bitset(epn, USBF_REG_EPN_DMA_CTRL, + USBF_EPN_DMA_EN); + + req->dma_size = (npkt - 1) * epn->ep.maxpacket + lastpkt; + + TRACEEP(epn, "ep%d dma xfer %zu\n", epn->id, req->dma_size); + + req->xfer_step = USBF_XFER_WAIT_DMA; + break; + + case USBF_XFER_WAIT_DMA: + if (!(epn->status & USBF_EPN_IN_END_INT)) { + TRACEEP(epn, "ep%d dma not done\n", epn->id); + break; + } + TRACEEP(epn, "ep%d dma done\n", epn->id); + + usb_gadget_unmap_request(&epn->udc->gadget, &req->req, 1); + req->is_mapped = 0; + + usbf_ep_reg_bitclr(epn, USBF_REG_EPN_CONTROL, USBF_EPN_AUTO); + + usbf_ep_reg_clrset(epn, USBF_REG_EPN_INT_ENA, + USBF_EPN_IN_END_EN, + USBF_EPN_IN_EN); + + req->req.actual += req->dma_size; + + left = req->req.length - req->req.actual; + if (left) { + usbf_ep_reg_writel(epn, USBF_REG_EPN_STATUS, ~(u32)USBF_EPN_IN_INT); + + TRACEEP(epn, "ep%d send residue %u\n", epn->id, left); + usbf_epn_send_residue(epn, + req->req.buf + req->req.actual, left); + req->req.actual += left; + req->xfer_step = USBF_XFER_WAIT_END; + break; + } + + if (req->req.actual % epn->ep.maxpacket) { + /* last packet was a short packet. Tell the hardware to + * send it right now. + */ + TRACEEP(epn, "ep%d send short\n", epn->id); + + usbf_ep_reg_writel(epn, USBF_REG_EPN_STATUS, + ~(u32)USBF_EPN_IN_INT); + usbf_ep_reg_bitset(epn, USBF_REG_EPN_CONTROL, + USBF_EPN_DEND); + + req->xfer_step = USBF_XFER_WAIT_END; + break; + } + + /* Last packet size was a maxpacket size + * Send null packet if needed + */ + if (req->req.zero) { + req->xfer_step = USBF_XFER_SEND_NULL; + break; + } + + /* No more action to do. Wait for the end of the USB transfer */ + req->xfer_step = USBF_XFER_WAIT_END; + break; + + case USBF_XFER_SEND_NULL: + TRACEEP(epn, "ep%d send null\n", epn->id); + usbf_epn_send_null(epn); + req->xfer_step = USBF_XFER_WAIT_END; + break; + + case USBF_XFER_WAIT_END: + if (!(epn->status & USBF_EPN_IN_INT)) { + TRACEEP(epn, "ep%d end not done\n", epn->id); + break; + } + TRACEEP(epn, "ep%d send done %u/%u\n", epn->id, + req->req.actual, req->req.length); + req->xfer_step = USBF_XFER_START; + return 0; + } + + return -EINPROGRESS; +} + +static void usbf_epn_recv_residue(struct usbf_ep *epn, void *buf, + unsigned int size) +{ + u32 last; + + last = usbf_ep_reg_readl(epn, USBF_REG_EPN_READ); + memcpy(buf, &last, size); +} + +static int usbf_epn_pio_out(struct usbf_ep *epn, struct usbf_req *req) +{ + int req_status = 0; + unsigned int count; + unsigned int recv; + unsigned int left; + unsigned int nb; + void *buf; + + if (epn->status & USBF_EPN_OUT_INT) { + recv = USBF_EPN_GET_LDATA( + usbf_ep_reg_readl(epn, USBF_REG_EPN_LEN_DCNT)); + count = recv; + + buf = req->req.buf; + buf += req->req.actual; + + left = req->req.length - req->req.actual; + + TRACEEP(epn, "ep%d recv %u, left %u, mpkt %u\n", epn->id, + recv, left, epn->ep.maxpacket); + + if (left > epn->ep.maxpacket) + left = epn->ep.maxpacket; + + if (count > left) { + req_status = -EOVERFLOW; + count = left; + } + + if (count) { + nb = count / sizeof(u32); + if (nb) { + usbf_ep_reg_read_rep(epn, USBF_REG_EPN_READ, + buf, nb); + buf += (nb * sizeof(u32)); + req->req.actual += (nb * sizeof(u32)); + count -= (nb * sizeof(u32)); + } + if (count) { + usbf_epn_recv_residue(epn, buf, count); + req->req.actual += count; + } + } + TRACEEP(epn, "ep%d recv %u/%u\n", epn->id, + req->req.actual, req->req.length); + + if (req_status) { + TRACEEP(epn, "ep%d req.status=%d\n", epn->id, + req_status); + req->req.status = req_status; + return 0; + } + + if (recv < epn->ep.maxpacket) { + TRACEEP(epn, "ep%d short packet\n", epn->id); + /* This is a short packet -> It is the end */ + req->req.status = 0; + return 0; + } + + /* Request full -> complete */ + if (req->req.actual == req->req.length) { + req->req.status = 0; + return 0; + } + } + + if (epn->status & USBF_EPN_OUT_NULL_INT) { + /* NULL packet received */ + TRACEEP(epn, "ep%d null packet\n", epn->id); + if (req->req.actual != req->req.length) { + req->req.status = req->req.short_not_ok ? + -EREMOTEIO : 0; + } else { + req->req.status = 0; + } + return 0; + } + + return -EINPROGRESS; +} + +static void usbf_epn_enable_out_end_int(struct usbf_ep *epn) +{ + usbf_ep_reg_bitset(epn, USBF_REG_EPN_INT_ENA, USBF_EPN_OUT_END_EN); +} + +static void usbf_epn_process_queue(struct usbf_ep *epn); + +static void usbf_epn_dma_out_send_dma(struct usbf_ep *epn, dma_addr_t addr, u32 npkt, bool is_short) +{ + usbf_ep_dma_reg_writel(epn, USBF_REG_DMA_EPN_DCR2, USBF_SYS_EPN_MPKT(epn->ep.maxpacket)); + usbf_ep_dma_reg_writel(epn, USBF_REG_DMA_EPN_TADR, addr); + + if (is_short) { + usbf_ep_dma_reg_writel(epn, USBF_REG_DMA_EPN_DCR1, + USBF_SYS_EPN_SET_DMACNT(1) | USBF_SYS_EPN_DIR0); + usbf_ep_dma_reg_bitset(epn, USBF_REG_DMA_EPN_DCR1, + USBF_SYS_EPN_REQEN); + + usbf_ep_reg_writel(epn, USBF_REG_EPN_LEN_DCNT, + USBF_EPN_SET_DMACNT(0)); + + /* The end of DMA transfer at the USBF level needs to be handled + * after the detection of the end of DMA transfer at the brige + * level. + * To force this sequence, enabling the OUT_END interrupt will + * be donee by the detection of the end of transfer at bridge + * level (ie. bridge interrupt). + */ + usbf_ep_reg_bitclr(epn, USBF_REG_EPN_INT_ENA, + USBF_EPN_OUT_EN | USBF_EPN_OUT_NULL_EN | USBF_EPN_OUT_END_EN); + epn->bridge_on_dma_end = usbf_epn_enable_out_end_int; + + /* Clear any pending OUT_END interrupt */ + usbf_ep_reg_writel(epn, USBF_REG_EPN_STATUS, + ~(u32)USBF_EPN_OUT_END_INT); + + usbf_ep_reg_writel(epn, USBF_REG_EPN_DMA_CTRL, + USBF_EPN_STOP_MODE | USBF_EPN_STOP_SET | USBF_EPN_DMAMODE0); + usbf_ep_reg_bitset(epn, USBF_REG_EPN_DMA_CTRL, + USBF_EPN_DMA_EN); + return; + } + + usbf_ep_dma_reg_writel(epn, USBF_REG_DMA_EPN_DCR1, + USBF_SYS_EPN_SET_DMACNT(npkt) | USBF_SYS_EPN_DIR0); + usbf_ep_dma_reg_bitset(epn, USBF_REG_DMA_EPN_DCR1, + USBF_SYS_EPN_REQEN); + + usbf_ep_reg_writel(epn, USBF_REG_EPN_LEN_DCNT, + USBF_EPN_SET_DMACNT(npkt)); + + /* Here, the bridge may or may not generate an interrupt to signal the + * end of DMA transfer. + * Keep only OUT_END interrupt and let handle the bridge later during + * the OUT_END processing. + */ + usbf_ep_reg_clrset(epn, USBF_REG_EPN_INT_ENA, + USBF_EPN_OUT_EN | USBF_EPN_OUT_NULL_EN, + USBF_EPN_OUT_END_EN); + + /* Disable bridge interrupt. It will be renabled later */ + usbf_reg_bitclr(epn->udc, USBF_REG_AHBBINTEN, + USBF_SYS_DMA_ENDINTEN_EPN(epn->id)); + + /* Clear any pending DMA_END interrupt at bridge level */ + usbf_reg_writel(epn->udc, USBF_REG_AHBBINT, + USBF_SYS_DMA_ENDINT_EPN(epn->id)); + + /* Clear any pending OUT_END interrupt */ + usbf_ep_reg_writel(epn, USBF_REG_EPN_STATUS, + ~(u32)USBF_EPN_OUT_END_INT); + + usbf_ep_reg_writel(epn, USBF_REG_EPN_DMA_CTRL, + USBF_EPN_STOP_MODE | USBF_EPN_STOP_SET | USBF_EPN_DMAMODE0 | USBF_EPN_BURST_SET); + usbf_ep_reg_bitset(epn, USBF_REG_EPN_DMA_CTRL, + USBF_EPN_DMA_EN); +} + +static size_t usbf_epn_dma_out_complete_dma(struct usbf_ep *epn, bool is_short) +{ + u32 dmacnt; + u32 tmp; + int ret; + + /* Restore interrupt mask */ + usbf_ep_reg_clrset(epn, USBF_REG_EPN_INT_ENA, + USBF_EPN_OUT_END_EN, + USBF_EPN_OUT_EN | USBF_EPN_OUT_NULL_EN); + + if (is_short) { + /* Nothing more to do when the DMA was for a short packet */ + return 0; + } + + /* Enable the bridge interrupt */ + usbf_reg_bitset(epn->udc, USBF_REG_AHBBINTEN, + USBF_SYS_DMA_ENDINTEN_EPN(epn->id)); + + tmp = usbf_ep_reg_readl(epn, USBF_REG_EPN_LEN_DCNT); + dmacnt = USBF_EPN_GET_DMACNT(tmp); + + if (dmacnt) { + /* Some packet were not received (halted by a short or a null + * packet. + * The bridge never raises an interrupt in this case. + * Wait for the end of transfer at bridge level + */ + ret = readl_poll_timeout_atomic( + epn->dma_regs + USBF_REG_DMA_EPN_DCR1, + tmp, (USBF_SYS_EPN_GET_DMACNT(tmp) == dmacnt), + 0, 10000); + if (ret) { + dev_err(epn->udc->dev, "ep%d wait bridge timed out\n", + epn->id); + } + + usbf_ep_dma_reg_bitclr(epn, USBF_REG_DMA_EPN_DCR1, + USBF_SYS_EPN_REQEN); + + /* The dmacnt value tells how many packet were not transferred + * from the maximum number of packet we set for the DMA transfer. + * Compute the left DMA size based on this value. + */ + return dmacnt * epn->ep.maxpacket; + } + + return 0; +} + +static int usbf_epn_dma_out(struct usbf_ep *epn, struct usbf_req *req) +{ + unsigned int dma_left; + unsigned int count; + unsigned int recv; + unsigned int left; + u32 npkt; + int ret; + + if (!IS_ALIGNED((uintptr_t)req->req.buf, 4)) { + TRACEEP(epn, "ep%d buf unaligned -> fallback pio\n", epn->id); + return usbf_epn_pio_out(epn, req); + } + + switch (req->xfer_step) { + default: + case USBF_XFER_START: + if (epn->status & USBF_EPN_OUT_NULL_INT) { + TRACEEP(epn, "ep%d null packet\n", epn->id); + if (req->req.actual != req->req.length) { + req->req.status = req->req.short_not_ok ? + -EREMOTEIO : 0; + } else { + req->req.status = 0; + } + return 0; + } + + if (!(epn->status & USBF_EPN_OUT_INT)) { + TRACEEP(epn, "ep%d OUT_INT not set -> spurious\n", + epn->id); + break; + } + + recv = USBF_EPN_GET_LDATA( + usbf_ep_reg_readl(epn, USBF_REG_EPN_LEN_DCNT)); + if (!recv) { + TRACEEP(epn, "ep%d recv = 0 -> spurious\n", + epn->id); + break; + } + + left = req->req.length - req->req.actual; + + TRACEEP(epn, "ep%d recv %u, left %u, mpkt %u\n", epn->id, + recv, left, epn->ep.maxpacket); + + if (recv > left) { + dev_err(epn->udc->dev, "ep%d overflow (%u/%u)\n", + epn->id, recv, left); + req->req.status = -EOVERFLOW; + return -EOVERFLOW; + } + + if (recv < epn->ep.maxpacket) { + /* Short packet received */ + TRACEEP(epn, "ep%d short packet\n", epn->id); + if (recv <= 3) { + usbf_epn_recv_residue(epn, + req->req.buf + req->req.actual, recv); + req->req.actual += recv; + + TRACEEP(epn, "ep%d recv done %u/%u\n", epn->id, + req->req.actual, req->req.length); + + req->xfer_step = USBF_XFER_START; + return 0; + } + + ret = usb_gadget_map_request(&epn->udc->gadget, &req->req, 0); + if (ret < 0) { + dev_err(epn->udc->dev, "map request failed (%d)\n", + ret); + return ret; + } + req->is_mapped = 1; + + usbf_epn_dma_out_send_dma(epn, + req->req.dma + req->req.actual, + 1, true); + req->dma_size = recv & ~0x3; + + TRACEEP(epn, "ep%d dma short xfer %zu\n", epn->id, + req->dma_size); + + req->xfer_step = USBF_XFER_WAIT_DMA_SHORT; + break; + } + + ret = usb_gadget_map_request(&epn->udc->gadget, &req->req, 0); + if (ret < 0) { + dev_err(epn->udc->dev, "map request failed (%d)\n", + ret); + return ret; + } + req->is_mapped = 1; + + /* Use the maximum DMA size according to the request buffer. + * We will adjust the received size later at the end of the DMA + * transfer with the left size computed from + * usbf_epn_dma_out_complete_dma(). + */ + npkt = left / epn->ep.maxpacket; + usbf_epn_dma_out_send_dma(epn, + req->req.dma + req->req.actual, + npkt, false); + req->dma_size = npkt * epn->ep.maxpacket; + + TRACEEP(epn, "ep%d dma xfer %zu (%u)\n", epn->id, + req->dma_size, npkt); + + req->xfer_step = USBF_XFER_WAIT_DMA; + break; + + case USBF_XFER_WAIT_DMA_SHORT: + if (!(epn->status & USBF_EPN_OUT_END_INT)) { + TRACEEP(epn, "ep%d dma short not done\n", epn->id); + break; + } + TRACEEP(epn, "ep%d dma short done\n", epn->id); + + usbf_epn_dma_out_complete_dma(epn, true); + + usb_gadget_unmap_request(&epn->udc->gadget, &req->req, 0); + req->is_mapped = 0; + + req->req.actual += req->dma_size; + + recv = USBF_EPN_GET_LDATA( + usbf_ep_reg_readl(epn, USBF_REG_EPN_LEN_DCNT)); + + count = recv & 0x3; + if (count) { + TRACEEP(epn, "ep%d recv residue %u\n", epn->id, + count); + usbf_epn_recv_residue(epn, + req->req.buf + req->req.actual, count); + req->req.actual += count; + } + + TRACEEP(epn, "ep%d recv done %u/%u\n", epn->id, + req->req.actual, req->req.length); + + req->xfer_step = USBF_XFER_START; + return 0; + + case USBF_XFER_WAIT_DMA: + if (!(epn->status & USBF_EPN_OUT_END_INT)) { + TRACEEP(epn, "ep%d dma not done\n", epn->id); + break; + } + TRACEEP(epn, "ep%d dma done\n", epn->id); + + dma_left = usbf_epn_dma_out_complete_dma(epn, false); + if (dma_left) { + /* Adjust the final DMA size with */ + count = req->dma_size - dma_left; + + TRACEEP(epn, "ep%d dma xfer done %u\n", epn->id, count); + + req->req.actual += count; + + if (epn->status & USBF_EPN_OUT_NULL_INT) { + /* DMA was stopped by a null packet reception */ + TRACEEP(epn, "ep%d dma stopped by null pckt\n", + epn->id); + usb_gadget_unmap_request(&epn->udc->gadget, + &req->req, 0); + req->is_mapped = 0; + + usbf_ep_reg_writel(epn, USBF_REG_EPN_STATUS, + ~(u32)USBF_EPN_OUT_NULL_INT); + + if (req->req.actual != req->req.length) { + req->req.status = req->req.short_not_ok ? + -EREMOTEIO : 0; + } else { + req->req.status = 0; + } + TRACEEP(epn, "ep%d recv done %u/%u\n", epn->id, + req->req.actual, req->req.length); + req->xfer_step = USBF_XFER_START; + return 0; + } + + recv = USBF_EPN_GET_LDATA( + usbf_ep_reg_readl(epn, USBF_REG_EPN_LEN_DCNT)); + left = req->req.length - req->req.actual; + if (recv > left) { + dev_err(epn->udc->dev, + "ep%d overflow (%u/%u)\n", epn->id, + recv, left); + req->req.status = -EOVERFLOW; + usb_gadget_unmap_request(&epn->udc->gadget, + &req->req, 0); + req->is_mapped = 0; + + req->xfer_step = USBF_XFER_START; + return -EOVERFLOW; + } + + if (recv > 3) { + usbf_epn_dma_out_send_dma(epn, + req->req.dma + req->req.actual, + 1, true); + req->dma_size = recv & ~0x3; + + TRACEEP(epn, "ep%d dma short xfer %zu\n", epn->id, + req->dma_size); + + req->xfer_step = USBF_XFER_WAIT_DMA_SHORT; + break; + } + + usb_gadget_unmap_request(&epn->udc->gadget, &req->req, 0); + req->is_mapped = 0; + + count = recv & 0x3; + if (count) { + TRACEEP(epn, "ep%d recv residue %u\n", epn->id, + count); + usbf_epn_recv_residue(epn, + req->req.buf + req->req.actual, count); + req->req.actual += count; + } + + TRACEEP(epn, "ep%d recv done %u/%u\n", epn->id, + req->req.actual, req->req.length); + + req->xfer_step = USBF_XFER_START; + return 0; + } + + /* Process queue at bridge interrupt only */ + usbf_ep_reg_bitclr(epn, USBF_REG_EPN_INT_ENA, + USBF_EPN_OUT_END_EN | USBF_EPN_OUT_EN | USBF_EPN_OUT_NULL_EN); + epn->status = 0; + epn->bridge_on_dma_end = usbf_epn_process_queue; + + req->xfer_step = USBF_XFER_WAIT_BRIDGE; + break; + + case USBF_XFER_WAIT_BRIDGE: + TRACEEP(epn, "ep%d bridge transfers done\n", epn->id); + + /* Restore interrupt mask */ + usbf_ep_reg_clrset(epn, USBF_REG_EPN_INT_ENA, + USBF_EPN_OUT_END_EN, + USBF_EPN_OUT_EN | USBF_EPN_OUT_NULL_EN); + + usb_gadget_unmap_request(&epn->udc->gadget, &req->req, 0); + req->is_mapped = 0; + + req->req.actual += req->dma_size; + + req->xfer_step = USBF_XFER_START; + left = req->req.length - req->req.actual; + if (!left) { + /* No more data can be added to the buffer */ + TRACEEP(epn, "ep%d recv done %u/%u\n", epn->id, + req->req.actual, req->req.length); + return 0; + } + TRACEEP(epn, "ep%d recv done %u/%u, wait more data\n", epn->id, + req->req.actual, req->req.length); + break; + } + + return -EINPROGRESS; +} + +static void usbf_epn_dma_stop(struct usbf_ep *epn) +{ + usbf_ep_dma_reg_bitclr(epn, USBF_REG_DMA_EPN_DCR1, USBF_SYS_EPN_REQEN); + + /* In the datasheet: + * If EP[m]_REQEN = 0b is set during DMA transfer, AHB-EPC stops DMA + * after 1 packet transfer completed. + * Therefore, wait sufficient time for ensuring DMA transfer + * completion. The WAIT time depends on the system, especially AHB + * bus activity + * So arbitrary 10ms would be sufficient. + */ + mdelay(10); + + usbf_ep_reg_bitclr(epn, USBF_REG_EPN_DMA_CTRL, USBF_EPN_DMA_EN); +} + +static void usbf_epn_dma_abort(struct usbf_ep *epn, struct usbf_req *req) +{ + TRACEEP(epn, "ep%d %s dma abort\n", epn->id, epn->is_in ? "in" : "out"); + + epn->bridge_on_dma_end = NULL; + + usbf_epn_dma_stop(epn); + + usb_gadget_unmap_request(&epn->udc->gadget, &req->req, + epn->is_in ? 1 : 0); + req->is_mapped = 0; + + usbf_ep_reg_bitclr(epn, USBF_REG_EPN_CONTROL, USBF_EPN_AUTO); + + if (epn->is_in) { + usbf_ep_reg_clrset(epn, USBF_REG_EPN_INT_ENA, + USBF_EPN_IN_END_EN, + USBF_EPN_IN_EN); + } else { + usbf_ep_reg_clrset(epn, USBF_REG_EPN_INT_ENA, + USBF_EPN_OUT_END_EN, + USBF_EPN_OUT_EN | USBF_EPN_OUT_NULL_EN); + } + + /* As dma is stopped, be sure that no DMA interrupt are pending */ + usbf_ep_reg_writel(epn, USBF_REG_EPN_STATUS, + USBF_EPN_IN_END_INT | USBF_EPN_OUT_END_INT); + + usbf_reg_writel(epn->udc, USBF_REG_AHBBINT, USBF_SYS_DMA_ENDINT_EPN(epn->id)); + + /* Enable DMA interrupt the bridge level */ + usbf_reg_bitset(epn->udc, USBF_REG_AHBBINTEN, + USBF_SYS_DMA_ENDINTEN_EPN(epn->id)); + + /* Reset transfer step */ + req->xfer_step = USBF_XFER_START; +} + +static void usbf_epn_fifo_flush(struct usbf_ep *epn) +{ + u32 ctrl; + u32 sts; + int ret; + + TRACEEP(epn, "ep%d %s fifo flush\n", epn->id, epn->is_in ? "in" : "out"); + + ctrl = usbf_ep_reg_readl(epn, USBF_REG_EPN_CONTROL); + usbf_ep_reg_writel(epn, USBF_REG_EPN_CONTROL, ctrl | USBF_EPN_BCLR); + + if (ctrl & USBF_EPN_DIR0) + return; + + ret = readl_poll_timeout_atomic(epn->regs + USBF_REG_EPN_STATUS, sts, + (sts & (USBF_EPN_IN_DATA | USBF_EPN_IN_EMPTY)) == USBF_EPN_IN_EMPTY, + 0, 10000); + if (ret) + dev_err(epn->udc->dev, "ep%d flush fifo timed out\n", epn->id); +} + +static void usbf_ep_req_done(struct usbf_ep *ep, struct usbf_req *req, + int status) +{ + list_del_init(&req->queue); + + if (status) { + req->req.status = status; + } else { + if (req->req.status == -EINPROGRESS) + req->req.status = status; + } + + TRACEEP(ep, "ep%d %s req done length %u/%u, status=%d\n", ep->id, + ep->is_in ? "in" : "out", + req->req.actual, req->req.length, req->req.status); + + if (req->is_mapped) + usbf_epn_dma_abort(ep, req); + + spin_unlock(&ep->udc->lock); + usb_gadget_giveback_request(&ep->ep, &req->req); + spin_lock(&ep->udc->lock); +} + +static void usbf_ep_nuke(struct usbf_ep *ep, int status) +{ + struct usbf_req *req; + + TRACEEP(ep, "ep%d %s nuke status %d\n", ep->id, + ep->is_in ? "in" : "out", + status); + + while (!list_empty(&ep->queue)) { + req = list_first_entry(&ep->queue, struct usbf_req, queue); + usbf_ep_req_done(ep, req, status); + } + + if (ep->id == 0) + usbf_ep0_fifo_flush(ep); + else + usbf_epn_fifo_flush(ep); +} + +static bool usbf_ep_is_stalled(struct usbf_ep *ep) +{ + u32 ctrl; + + if (ep->id == 0) { + ctrl = usbf_ep_reg_readl(ep, USBF_REG_EP0_CONTROL); + return (ctrl & USBF_EP0_STL) ? true : false; + } + + ctrl = usbf_ep_reg_readl(ep, USBF_REG_EPN_CONTROL); + if (ep->is_in) + return (ctrl & USBF_EPN_ISTL) ? true : false; + + return (ctrl & USBF_EPN_OSTL) ? true : false; +} + +static int usbf_epn_start_queue(struct usbf_ep *epn) +{ + struct usbf_req *req; + int ret; + + if (usbf_ep_is_stalled(epn)) + return 0; + + req = list_first_entry_or_null(&epn->queue, struct usbf_req, queue); + + if (epn->is_in) { + if (req && !epn->is_processing) { + ret = epn->dma_regs ? + usbf_epn_dma_in(epn, req) : + usbf_epn_pio_in(epn, req); + if (ret != -EINPROGRESS) { + dev_err(epn->udc->dev, + "queued next request not in progress\n"); + /* The request cannot be completed (ie + * ret == 0) on the first call. + * stall and nuke the endpoint + */ + return ret ? ret : -EIO; + } + } + } else { + if (req) { + /* Clear ONAK to accept OUT tokens */ + usbf_ep_reg_bitclr(epn, USBF_REG_EPN_CONTROL, + USBF_EPN_ONAK); + + /* Enable interrupts */ + usbf_ep_reg_bitset(epn, USBF_REG_EPN_INT_ENA, + USBF_EPN_OUT_INT | USBF_EPN_OUT_NULL_INT); + } else { + /* Disable incoming data and interrupt. + * They will be enable on next usb_eb_queue call + */ + usbf_ep_reg_bitset(epn, USBF_REG_EPN_CONTROL, + USBF_EPN_ONAK); + usbf_ep_reg_bitclr(epn, USBF_REG_EPN_INT_ENA, + USBF_EPN_OUT_INT | USBF_EPN_OUT_NULL_INT); + } + } + return 0; +} + +static int usbf_ep_process_queue(struct usbf_ep *ep) +{ + int (*usbf_ep_xfer)(struct usbf_ep *ep, struct usbf_req *req); + struct usbf_req *req; + int is_processing; + int ret; + + if (ep->is_in) { + usbf_ep_xfer = usbf_ep0_pio_in; + if (ep->id) { + usbf_ep_xfer = ep->dma_regs ? + usbf_epn_dma_in : usbf_epn_pio_in; + } + } else { + usbf_ep_xfer = usbf_ep0_pio_out; + if (ep->id) { + usbf_ep_xfer = ep->dma_regs ? + usbf_epn_dma_out : usbf_epn_pio_out; + } + } + + req = list_first_entry_or_null(&ep->queue, struct usbf_req, queue); + if (!req) { + dev_err(ep->udc->dev, + "no request available for ep%d %s process\n", ep->id, + ep->is_in ? "in" : "out"); + return -ENOENT; + } + + do { + /* Were going to read the FIFO for this current request. + * NAK any other incoming data to avoid a race condition if no + * more request are available. + */ + if (!ep->is_in && ep->id != 0) { + usbf_ep_reg_bitset(ep, USBF_REG_EPN_CONTROL, + USBF_EPN_ONAK); + } + + ret = usbf_ep_xfer(ep, req); + if (ret == -EINPROGRESS) { + if (!ep->is_in && ep->id != 0) { + /* The current request needs more data. + * Allow incoming data + */ + usbf_ep_reg_bitclr(ep, USBF_REG_EPN_CONTROL, + USBF_EPN_ONAK); + } + return ret; + } + + is_processing = ep->is_processing; + ep->is_processing = 1; + usbf_ep_req_done(ep, req, ret); + ep->is_processing = is_processing; + + if (ret) { + /* An error was detected during the request transfer. + * Any pending DMA transfers were aborted by the + * usbf_ep_req_done() call. + * It's time to flush the fifo + */ + if (ep->id == 0) + usbf_ep0_fifo_flush(ep); + else + usbf_epn_fifo_flush(ep); + } + + req = list_first_entry_or_null(&ep->queue, struct usbf_req, + queue); + + if (ep->is_in) + continue; + + if (ep->id != 0) { + if (req) { + /* An other request is available. + * Allow incoming data + */ + usbf_ep_reg_bitclr(ep, USBF_REG_EPN_CONTROL, + USBF_EPN_ONAK); + } else { + /* No request queued. Disable interrupts. + * They will be enabled on usb_ep_queue + */ + usbf_ep_reg_bitclr(ep, USBF_REG_EPN_INT_ENA, + USBF_EPN_OUT_INT | USBF_EPN_OUT_NULL_INT); + } + } + /* Do not recall usbf_ep_xfer() */ + return req ? -EINPROGRESS : 0; + + } while (req); + + return 0; +} + +static void usbf_ep_stall(struct usbf_ep *ep, bool stall) +{ + struct usbf_req *first; + + TRACEEP(ep, "ep%d %s %s\n", ep->id, + ep->is_in ? "in" : "out", + stall ? "stall" : "unstall"); + + if (ep->id == 0) { + if (stall) + usbf_ep_reg_bitset(ep, USBF_REG_EP0_CONTROL, USBF_EP0_STL); + else + usbf_ep_reg_bitclr(ep, USBF_REG_EP0_CONTROL, USBF_EP0_STL); + return; + } + + if (stall) { + if (ep->is_in) + usbf_ep_reg_bitset(ep, USBF_REG_EPN_CONTROL, + USBF_EPN_ISTL); + else + usbf_ep_reg_bitset(ep, USBF_REG_EPN_CONTROL, + USBF_EPN_OSTL | USBF_EPN_OSTL_EN); + } else { + first = list_first_entry_or_null(&ep->queue, struct usbf_req, queue); + if (first && first->is_mapped) { + /* This can appear if the host halts an endpoint using + * SET_FEATURE and then un-halts the endpoint + */ + usbf_epn_dma_abort(ep, first); + } + usbf_epn_fifo_flush(ep); + if (ep->is_in) { + usbf_ep_reg_clrset(ep, USBF_REG_EPN_CONTROL, + USBF_EPN_ISTL, + USBF_EPN_IPIDCLR); + } else { + usbf_ep_reg_clrset(ep, USBF_REG_EPN_CONTROL, + USBF_EPN_OSTL, + USBF_EPN_OSTL_EN | USBF_EPN_OPIDCLR); + } + usbf_epn_start_queue(ep); + } +} + +static void usbf_ep0_enable(struct usbf_ep *ep0) +{ + usbf_ep_reg_writel(ep0, USBF_REG_EP0_CONTROL, USBF_EP0_INAK_EN | USBF_EP0_BCLR); + + usbf_ep_reg_writel(ep0, USBF_REG_EP0_INT_ENA, + USBF_EP0_SETUP_EN | USBF_EP0_STG_START_EN | USBF_EP0_STG_END_EN | + USBF_EP0_OUT_EN | USBF_EP0_OUT_NULL_EN | USBF_EP0_IN_EN); + + ep0->udc->ep0state = EP0_IDLE; + ep0->disabled = 0; + + /* enable interrupts for the ep0 */ + usbf_reg_bitset(ep0->udc, USBF_REG_USB_INT_ENA, USBF_USB_EPN_EN(0)); +} + +static int usbf_epn_enable(struct usbf_ep *epn) +{ + u32 base_addr; + u32 ctrl; + + base_addr = usbf_ep_info[epn->id].base_addr; + usbf_ep_reg_writel(epn, USBF_REG_EPN_PCKT_ADRS, + USBF_EPN_BASEAD(base_addr) | USBF_EPN_MPKT(epn->ep.maxpacket)); + + /* OUT transfer interrupt are enabled during usb_ep_queue */ + if (epn->is_in) { + /* Will be changed in DMA processing */ + usbf_ep_reg_writel(epn, USBF_REG_EPN_INT_ENA, USBF_EPN_IN_EN); + } + + /* Clear, set endpoint direction, set IN/OUT STL, and enable + * Send NAK for Data out as request are not queued yet + */ + ctrl = USBF_EPN_EN | USBF_EPN_BCLR; + if (epn->is_in) + ctrl |= USBF_EPN_OSTL | USBF_EPN_OSTL_EN; + else + ctrl |= USBF_EPN_DIR0 | USBF_EPN_ISTL | USBF_EPN_OSTL_EN | USBF_EPN_ONAK; + usbf_ep_reg_writel(epn, USBF_REG_EPN_CONTROL, ctrl); + + return 0; +} + +static int usbf_ep_enable(struct usb_ep *_ep, + const struct usb_endpoint_descriptor *desc) +{ + struct usbf_ep *ep = container_of(_ep, struct usbf_ep, ep); + struct usbf_udc *udc = ep->udc; + unsigned long flags; + int ret; + + if (ep->id == 0) { + TRACEEP(ep, "ep0 invalid call\n"); + return -EINVAL; + } + + if (!desc || desc->bDescriptorType != USB_DT_ENDPOINT) { + TRACEEP(ep, "ep%d bad descriptor\n", ep->id); + return -EINVAL; + } + + TRACEEP(ep, "ep%d %s mpkts %d\n", ep->id, + usb_endpoint_dir_in(desc) ? "in" : "out", + usb_endpoint_maxp(desc)); + + spin_lock_irqsave(&ep->udc->lock, flags); + ep->is_in = usb_endpoint_dir_in(desc); + ep->ep.maxpacket = usb_endpoint_maxp(desc); + + ret = usbf_epn_enable(ep); + if (ret) + goto end; + + ep->disabled = 0; + + /* enable interrupts for this endpoint */ + usbf_reg_bitset(udc, USBF_REG_USB_INT_ENA, USBF_USB_EPN_EN(ep->id)); + + /* enable DMA interrupt at bridge level if DMA is used */ + if (ep->dma_regs) { + ep->bridge_on_dma_end = NULL; + usbf_reg_bitset(udc, USBF_REG_AHBBINTEN, + USBF_SYS_DMA_ENDINTEN_EPN(ep->id)); + } + + ret = 0; +end: + spin_unlock_irqrestore(&ep->udc->lock, flags); + return ret; +} + +static int usbf_epn_disable(struct usbf_ep *epn) +{ + /* Disable interrupts */ + usbf_ep_reg_writel(epn, USBF_REG_EPN_INT_ENA, 0); + + /* Disable endpoint */ + usbf_ep_reg_bitclr(epn, USBF_REG_EPN_CONTROL, USBF_EPN_EN); + + /* remove anything that was pending */ + usbf_ep_nuke(epn, -ESHUTDOWN); + + return 0; +} + +static int usbf_ep_disable(struct usb_ep *_ep) +{ + struct usbf_ep *ep = container_of(_ep, struct usbf_ep, ep); + struct usbf_udc *udc = ep->udc; + unsigned long flags; + int ret; + + if (ep->id == 0) { + TRACEEP(ep, "ep0 invalid call\n"); + return -EINVAL; + } + + TRACEEP(ep, "ep%d %s mpkts %d\n", ep->id, + ep->is_in ? "in" : "out", ep->ep.maxpacket); + + spin_lock_irqsave(&ep->udc->lock, flags); + ep->disabled = 1; + /* Disable DMA interrupt */ + if (ep->dma_regs) { + usbf_reg_bitclr(udc, USBF_REG_AHBBINTEN, + USBF_SYS_DMA_ENDINTEN_EPN(ep->id)); + ep->bridge_on_dma_end = NULL; + } + /* disable interrupts for this endpoint */ + usbf_reg_bitclr(udc, USBF_REG_USB_INT_ENA, USBF_USB_EPN_EN(ep->id)); + /* and the endpoint itself */ + ret = usbf_epn_disable(ep); + spin_unlock_irqrestore(&ep->udc->lock, flags); + + return ret; +} + +static int usbf_ep0_queue(struct usbf_ep *ep0, struct usbf_req *req, + gfp_t gfp_flags) +{ + int ret; + + req->req.actual = 0; + req->req.status = -EINPROGRESS; + req->is_zero_sent = 0; + + list_add_tail(&req->queue, &ep0->queue); + + if (ep0->udc->ep0state == EP0_IN_STATUS_START_PHASE) + return 0; + + if (!ep0->is_in) + return 0; + + if (ep0->udc->ep0state == EP0_IN_STATUS_PHASE) { + if (req->req.length) { + dev_err(ep0->udc->dev, + "request lng %u for ep0 in status phase\n", + req->req.length); + return -EINVAL; + } + ep0->delayed_status = 0; + } + if (!ep0->is_processing) { + ret = usbf_ep0_pio_in(ep0, req); + if (ret != -EINPROGRESS) { + dev_err(ep0->udc->dev, + "queued request not in progress\n"); + /* The request cannot be completed (ie + * ret == 0) on the first call + */ + return ret ? ret : -EIO; + } + } + + return 0; +} + +static int usbf_epn_queue(struct usbf_ep *ep, struct usbf_req *req, + gfp_t gfp_flags) +{ + int was_empty; + int ret; + + if (ep->disabled) { + dev_err(ep->udc->dev, "ep%d request queue while disable\n", + ep->id); + return -ESHUTDOWN; + } + + req->req.actual = 0; + req->req.status = -EINPROGRESS; + req->is_zero_sent = 0; + req->xfer_step = USBF_XFER_START; + + was_empty = list_empty(&ep->queue); + list_add_tail(&req->queue, &ep->queue); + if (was_empty) { + ret = usbf_epn_start_queue(ep); + if (ret) + return ret; + } + return 0; +} + +static int usbf_ep_queue(struct usb_ep *_ep, struct usb_request *_req, + gfp_t gfp_flags) +{ + struct usbf_req *req = container_of(_req, struct usbf_req, req); + struct usbf_ep *ep = container_of(_ep, struct usbf_ep, ep); + struct usbf_udc *udc = ep->udc; + unsigned long flags; + int ret; + + if (!_req || !_req->buf) { + TRACEEP(ep, "ep%d invalid request\n", ep->id); + return -EINVAL; + } + + if (!udc || !udc->driver) { + TRACEEP(ep, "ep%d invalid device\n", ep->id); + return -EINVAL; + } + + TRACEEP(ep, "ep%d %s req queue length %u, zero %u, short_not_ok %u\n", + ep->id, ep->is_in ? "in" : "out", + req->req.length, req->req.zero, req->req.short_not_ok); + + spin_lock_irqsave(&ep->udc->lock, flags); + if (ep->id == 0) + ret = usbf_ep0_queue(ep, req, gfp_flags); + else + ret = usbf_epn_queue(ep, req, gfp_flags); + spin_unlock_irqrestore(&ep->udc->lock, flags); + return ret; +} + +static int usbf_ep_dequeue(struct usb_ep *_ep, struct usb_request *_req) +{ + struct usbf_req *req = container_of(_req, struct usbf_req, req); + struct usbf_ep *ep = container_of(_ep, struct usbf_ep, ep); + unsigned long flags; + int is_processing; + int first; + int ret; + + spin_lock_irqsave(&ep->udc->lock, flags); + + TRACEEP(ep, "ep%d %s req dequeue length %u/%u\n", + ep->id, ep->is_in ? "in" : "out", + req->req.actual, req->req.length); + + first = list_is_first(&req->queue, &ep->queue); + + /* Complete the request but avoid any operation that could be done + * if a new request is queued during the request completion + */ + is_processing = ep->is_processing; + ep->is_processing = 1; + usbf_ep_req_done(ep, req, -ECONNRESET); + ep->is_processing = is_processing; + + if (first) { + /* The first item in the list was dequeued. + * This item could already be submitted to the hardware. + * So, flush the fifo + */ + if (ep->id) + usbf_epn_fifo_flush(ep); + else + usbf_ep0_fifo_flush(ep); + } + + if (ep->id == 0) { + /* We dequeue a request on ep0. On this endpoint, we can have + * 1 request related to the data stage and/or 1 request + * related to the status stage. + * We dequeue one of them and so the USB control transaction + * is no more coherent. The simple way to be consistent after + * dequeuing is to stall and nuke the endpoint and wait the + * next SETUP packet. + */ + usbf_ep_stall(ep, true); + usbf_ep_nuke(ep, -ECONNRESET); + ep->udc->ep0state = EP0_IDLE; + goto end; + } + + if (!first) + goto end; + + ret = usbf_epn_start_queue(ep); + if (ret) { + usbf_ep_stall(ep, true); + usbf_ep_nuke(ep, -EIO); + } +end: + spin_unlock_irqrestore(&ep->udc->lock, flags); + return 0; +} + +static struct usb_request *usbf_ep_alloc_request(struct usb_ep *_ep, + gfp_t gfp_flags) +{ + struct usbf_req *req; + + if (!_ep) + return NULL; + + req = kzalloc(sizeof(*req), gfp_flags); + if (!req) + return NULL; + + INIT_LIST_HEAD(&req->queue); + + return &req->req; +} + +static void usbf_ep_free_request(struct usb_ep *_ep, struct usb_request *_req) +{ + struct usbf_req *req; + unsigned long flags; + struct usbf_ep *ep; + + if (!_ep || !_req) + return; + + req = container_of(_req, struct usbf_req, req); + ep = container_of(_ep, struct usbf_ep, ep); + + spin_lock_irqsave(&ep->udc->lock, flags); + list_del_init(&req->queue); + spin_unlock_irqrestore(&ep->udc->lock, flags); + kfree(req); +} + +static int usbf_ep_set_halt(struct usb_ep *_ep, int halt) +{ + struct usbf_ep *ep = container_of(_ep, struct usbf_ep, ep); + unsigned long flags; + int ret; + + if (ep->id == 0) + return -EINVAL; + + spin_lock_irqsave(&ep->udc->lock, flags); + + if (!list_empty(&ep->queue)) { + ret = -EAGAIN; + goto end; + } + + usbf_ep_stall(ep, halt); + if (!halt) + ep->is_wedged = 0; + + ret = 0; +end: + spin_unlock_irqrestore(&ep->udc->lock, flags); + + return ret; +} + +static int usbf_ep_set_wedge(struct usb_ep *_ep) +{ + struct usbf_ep *ep = container_of(_ep, struct usbf_ep, ep); + unsigned long flags; + int ret; + + if (ep->id == 0) + return -EINVAL; + + spin_lock_irqsave(&ep->udc->lock, flags); + if (!list_empty(&ep->queue)) { + ret = -EAGAIN; + goto end; + } + usbf_ep_stall(ep, 1); + ep->is_wedged = 1; + + ret = 0; +end: + spin_unlock_irqrestore(&ep->udc->lock, flags); + return ret; +} + +static struct usb_ep_ops usbf_ep_ops = { + .enable = usbf_ep_enable, + .disable = usbf_ep_disable, + .queue = usbf_ep_queue, + .dequeue = usbf_ep_dequeue, + .set_halt = usbf_ep_set_halt, + .set_wedge = usbf_ep_set_wedge, + .alloc_request = usbf_ep_alloc_request, + .free_request = usbf_ep_free_request, +}; + +static void usbf_ep0_req_complete(struct usb_ep *_ep, struct usb_request *_req) +{ +} + +static void usbf_ep0_fill_req(struct usbf_ep *ep0, struct usbf_req *req, + void *buf, unsigned int length, + void (*complete)(struct usb_ep *_ep, + struct usb_request *_req)) +{ + if (buf && length) + memcpy(ep0->udc->ep0_buf, buf, length); + + req->req.buf = ep0->udc->ep0_buf; + req->req.length = length; + req->req.dma = 0; + req->req.zero = true; + req->req.complete = complete ? complete : usbf_ep0_req_complete; + req->req.status = -EINPROGRESS; + req->req.context = NULL; + req->req.actual = 0; +} + +static struct usbf_ep *usbf_get_ep_by_addr(struct usbf_udc *udc, u8 address) +{ + struct usbf_ep *ep; + unsigned int i; + + if ((address & USB_ENDPOINT_NUMBER_MASK) == 0) + return &udc->ep[0]; + + for (i = 1; i < ARRAY_SIZE(udc->ep); i++) { + ep = &udc->ep[i]; + + if (!ep->ep.desc) + continue; + + if (ep->ep.desc->bEndpointAddress == address) + return ep; + } + + return NULL; +} + +static int usbf_req_delegate(struct usbf_udc *udc, + const struct usb_ctrlrequest *ctrlrequest) +{ + int ret; + + spin_unlock(&udc->lock); + ret = udc->driver->setup(&udc->gadget, ctrlrequest); + spin_lock(&udc->lock); + if (ret < 0) { + TRACEEP(&udc->ep[0], "udc driver setup failed %d\n", ret); + return ret; + } + if (ret == USB_GADGET_DELAYED_STATUS) { + TRACEEP(&udc->ep[0], "delayed status set\n"); + udc->ep[0].delayed_status = 1; + return 0; + } + return ret; +} + +static int usbf_req_get_status(struct usbf_udc *udc, + const struct usb_ctrlrequest *ctrlrequest) +{ + struct usbf_ep *ep; + u16 status_data; + u16 wLength; + u16 wValue; + u16 wIndex; + + wValue = le16_to_cpu(ctrlrequest->wValue); + wLength = le16_to_cpu(ctrlrequest->wLength); + wIndex = le16_to_cpu(ctrlrequest->wIndex); + + switch (ctrlrequest->bRequestType) { + case USB_DIR_IN | USB_RECIP_DEVICE | USB_TYPE_STANDARD: + if ((wValue != 0) || (wIndex != 0) || (wLength != 2)) + goto delegate; + + status_data = 0; + if (udc->gadget.is_selfpowered) + status_data |= BIT(USB_DEVICE_SELF_POWERED); + + if (udc->is_remote_wakeup) + status_data |= BIT(USB_DEVICE_REMOTE_WAKEUP); + + break; + + case USB_DIR_IN | USB_RECIP_ENDPOINT | USB_TYPE_STANDARD: + if ((wValue != 0) || (wLength != 2)) + goto delegate; + + ep = usbf_get_ep_by_addr(udc, wIndex); + if (!ep) + return -EINVAL; + + status_data = 0; + if (usbf_ep_is_stalled(ep)) + status_data |= cpu_to_le16(1); + break; + + case USB_DIR_IN | USB_RECIP_INTERFACE | USB_TYPE_STANDARD: + if ((wValue != 0) || (wLength != 2)) + goto delegate; + status_data = 0; + break; + + default: + goto delegate; + } + + usbf_ep0_fill_req(&udc->ep[0], &udc->setup_reply, &status_data, + sizeof(status_data), NULL); + usbf_ep0_queue(&udc->ep[0], &udc->setup_reply, GFP_ATOMIC); + + return 0; + +delegate: + return usbf_req_delegate(udc, ctrlrequest); +} + +static int usbf_req_clear_set_feature(struct usbf_udc *udc, + const struct usb_ctrlrequest *ctrlrequest, + bool is_set) +{ + struct usbf_ep *ep; + u16 wLength; + u16 wValue; + u16 wIndex; + + wValue = le16_to_cpu(ctrlrequest->wValue); + wLength = le16_to_cpu(ctrlrequest->wLength); + wIndex = le16_to_cpu(ctrlrequest->wIndex); + + switch (ctrlrequest->bRequestType) { + case USB_DIR_OUT | USB_RECIP_DEVICE: + if ((wIndex != 0) || (wLength != 0)) + goto delegate; + + if (wValue != cpu_to_le16(USB_DEVICE_REMOTE_WAKEUP)) + goto delegate; + + udc->is_remote_wakeup = is_set; + break; + + case USB_DIR_OUT | USB_RECIP_ENDPOINT: + if (wLength != 0) + goto delegate; + + ep = usbf_get_ep_by_addr(udc, wIndex); + if (!ep) + return -EINVAL; + + if ((ep->id == 0) && is_set) { + /* Endpoint 0 cannot be halted (stalled) + * Returning an error code leads to a STALL on this ep0 + * but keep the automate in a consistent state. + */ + return -EINVAL; + } + if (ep->is_wedged && !is_set) { + /* Ignore CLEAR_FEATURE(HALT ENDPOINT) when the + * endpoint is wedged + */ + break; + } + usbf_ep_stall(ep, is_set); + break; + + default: + goto delegate; + } + + return 0; + +delegate: + return usbf_req_delegate(udc, ctrlrequest); +} + +static void usbf_ep0_req_set_address_complete(struct usb_ep *_ep, + struct usb_request *_req) +{ + struct usbf_ep *ep = container_of(_ep, struct usbf_ep, ep); + + /* The status phase of the SET_ADDRESS request is completed ... */ + if (_req->status == 0) { + /* ... without any errors -> Signaled the state to the core. */ + usb_gadget_set_state(&ep->udc->gadget, USB_STATE_ADDRESS); + } + + /* In case of request failure, there is no need to revert the address + * value set to the hardware as the hardware will take care of the + * value only if the status stage is completed normally. + */ +} + +static int usbf_req_set_address(struct usbf_udc *udc, + const struct usb_ctrlrequest *ctrlrequest) +{ + u16 wLength; + u16 wValue; + u16 wIndex; + u32 addr; + + wValue = le16_to_cpu(ctrlrequest->wValue); + wLength = le16_to_cpu(ctrlrequest->wLength); + wIndex = le16_to_cpu(ctrlrequest->wIndex); + + if (ctrlrequest->bRequestType != (USB_DIR_OUT | USB_RECIP_DEVICE)) + goto delegate; + + if ((wIndex != 0) || (wLength != 0) || (wValue > 127)) + return -EINVAL; + + addr = wValue; + /* The hardware will take care of this USB address after the status + * stage of the SET_ADDRESS request is completed normally. + * It is safe to write it now + */ + usbf_reg_writel(udc, USBF_REG_USB_ADDRESS, USBF_USB_SET_USB_ADDR(addr)); + + /* Queued the status request */ + usbf_ep0_fill_req(&udc->ep[0], &udc->setup_reply, NULL, 0, + usbf_ep0_req_set_address_complete); + usbf_ep0_queue(&udc->ep[0], &udc->setup_reply, GFP_ATOMIC); + + return 0; + +delegate: + return usbf_req_delegate(udc, ctrlrequest); +} + +static int usbf_req_set_configuration(struct usbf_udc *udc, + const struct usb_ctrlrequest *ctrlrequest) +{ + u16 wLength; + u16 wValue; + u16 wIndex; + int ret; + + ret = usbf_req_delegate(udc, ctrlrequest); + if (ret) + return ret; + + wValue = le16_to_cpu(ctrlrequest->wValue); + wLength = le16_to_cpu(ctrlrequest->wLength); + wIndex = le16_to_cpu(ctrlrequest->wIndex); + + if ((ctrlrequest->bRequestType != (USB_DIR_OUT | USB_RECIP_DEVICE)) || + (wIndex != 0) || (wLength != 0)) { + /* No error detected by driver->setup() but it is not an USB2.0 + * Ch9 SET_CONFIGURATION. + * Nothing more to do + */ + return 0; + } + + if (wValue & 0x00FF) { + usbf_reg_bitset(udc, USBF_REG_USB_CONTROL, USBF_USB_CONF); + } else { + usbf_reg_bitclr(udc, USBF_REG_USB_CONTROL, USBF_USB_CONF); + /* Go back to Address State */ + spin_unlock(&udc->lock); + usb_gadget_set_state(&udc->gadget, USB_STATE_ADDRESS); + spin_lock(&udc->lock); + } + + return 0; +} + +static int usbf_handle_ep0_setup(struct usbf_ep *ep0) +{ + union { + struct usb_ctrlrequest ctrlreq; + u32 raw[2]; + } crq; + struct usbf_udc *udc = ep0->udc; + int ret; + + /* Read setup data (ie the USB control request) */ + crq.raw[0] = usbf_reg_readl(udc, USBF_REG_SETUP_DATA0); + crq.raw[1] = usbf_reg_readl(udc, USBF_REG_SETUP_DATA1); + + TRACEEP(ep0, + "req%02x.%02x, wValue 0x%04x, wIndex 0x%04x, wLength 0x%04x\n", + crq.ctrlreq.bRequestType, crq.ctrlreq.bRequest, + crq.ctrlreq.wValue, crq.ctrlreq.wIndex, crq.ctrlreq.wLength); + + /* Set current EP0 state according to the received request */ + if (crq.ctrlreq.wLength) { + if (crq.ctrlreq.bRequestType & USB_DIR_IN) { + udc->ep0state = EP0_IN_DATA_PHASE; + usbf_ep_reg_clrset(ep0, USBF_REG_EP0_CONTROL, + USBF_EP0_INAK, + USBF_EP0_INAK_EN); + ep0->is_in = 1; + } else { + udc->ep0state = EP0_OUT_DATA_PHASE; + usbf_ep_reg_bitclr(ep0, USBF_REG_EP0_CONTROL, + USBF_EP0_ONAK); + ep0->is_in = 0; + } + } else { + udc->ep0state = EP0_IN_STATUS_START_PHASE; + ep0->is_in = 1; + } + + /* We starts a new control transfer -> Clear the delayed status flag */ + ep0->delayed_status = 0; + + if ((crq.ctrlreq.bRequestType & USB_TYPE_MASK) != USB_TYPE_STANDARD) { + /* This is not a USB standard request -> delelate */ + goto delegate; + } + + switch (crq.ctrlreq.bRequest) { + case USB_REQ_GET_STATUS: + ret = usbf_req_get_status(udc, &crq.ctrlreq); + break; + + case USB_REQ_CLEAR_FEATURE: + ret = usbf_req_clear_set_feature(udc, &crq.ctrlreq, false); + break; + + case USB_REQ_SET_FEATURE: + ret = usbf_req_clear_set_feature(udc, &crq.ctrlreq, true); + break; + + case USB_REQ_SET_ADDRESS: + ret = usbf_req_set_address(udc, &crq.ctrlreq); + break; + + case USB_REQ_SET_CONFIGURATION: + ret = usbf_req_set_configuration(udc, &crq.ctrlreq); + break; + + default: + goto delegate; + } + + return ret; + +delegate: + return usbf_req_delegate(udc, &crq.ctrlreq); +} + +static int usbf_handle_ep0_data_status(struct usbf_ep *ep0, + const char *ep0state_name, + enum usbf_ep0state next_ep0state) +{ + struct usbf_udc *udc = ep0->udc; + int ret; + + ret = usbf_ep_process_queue(ep0); + switch (ret) { + case -ENOENT: + dev_err(udc->dev, + "no request available for ep0 %s phase\n", + ep0state_name); + break; + case -EINPROGRESS: + /* More data needs to be processed */ + ret = 0; + break; + case 0: + /* All requests in the queue are processed */ + udc->ep0state = next_ep0state; + break; + default: + dev_err(udc->dev, + "process queue failed for ep0 %s phase (%d)\n", + ep0state_name, ret); + break; + } + return ret; +} + +static int usbf_handle_ep0_out_status_start(struct usbf_ep *ep0) +{ + struct usbf_udc *udc = ep0->udc; + struct usbf_req *req; + + usbf_ep_reg_clrset(ep0, USBF_REG_EP0_CONTROL, + USBF_EP0_ONAK, + USBF_EP0_PIDCLR); + ep0->is_in = 0; + + req = list_first_entry_or_null(&ep0->queue, struct usbf_req, queue); + if (!req) { + usbf_ep0_fill_req(ep0, &udc->setup_reply, NULL, 0, NULL); + usbf_ep0_queue(ep0, &udc->setup_reply, GFP_ATOMIC); + } else { + if (req->req.length) { + dev_err(udc->dev, + "queued request length %u for ep0 out status phase\n", + req->req.length); + } + } + udc->ep0state = EP0_OUT_STATUS_PHASE; + return 0; +} + +static int usbf_handle_ep0_in_status_start(struct usbf_ep *ep0) +{ + struct usbf_udc *udc = ep0->udc; + struct usbf_req *req; + int ret; + + usbf_ep_reg_clrset(ep0, USBF_REG_EP0_CONTROL, + USBF_EP0_INAK, + USBF_EP0_INAK_EN | USBF_EP0_PIDCLR); + ep0->is_in = 1; + + /* Queue request for status if needed */ + req = list_first_entry_or_null(&ep0->queue, struct usbf_req, queue); + if (!req) { + if (ep0->delayed_status) { + TRACEEP(ep0, + "EP0_IN_STATUS_START_PHASE ep0->delayed_status set\n"); + udc->ep0state = EP0_IN_STATUS_PHASE; + return 0; + } + + usbf_ep0_fill_req(ep0, &udc->setup_reply, NULL, + 0, NULL); + usbf_ep0_queue(ep0, &udc->setup_reply, + GFP_ATOMIC); + + req = list_first_entry_or_null(&ep0->queue, struct usbf_req, queue); + } else { + if (req->req.length) { + dev_err(udc->dev, + "queued request length %u for ep0 in status phase\n", + req->req.length); + } + } + + ret = usbf_ep0_pio_in(ep0, req); + if (ret != -EINPROGRESS) { + usbf_ep_req_done(ep0, req, ret); + udc->ep0state = EP0_IN_STATUS_END_PHASE; + return 0; + } + + udc->ep0state = EP0_IN_STATUS_PHASE; + return 0; +} + +static void usbf_ep0_interrupt(struct usbf_ep *ep0) +{ + struct usbf_udc *udc = ep0->udc; + u32 sts, prev_sts; + int prev_ep0state; + int ret; + + ep0->status = usbf_ep_reg_readl(ep0, USBF_REG_EP0_STATUS); + usbf_ep_reg_writel(ep0, USBF_REG_EP0_STATUS, ~ep0->status); + + TRACEEP(ep0, "ep0 status=0x%08x, enable=%08x\n, ctrl=0x%08x\n", + ep0->status, + usbf_ep_reg_readl(ep0, USBF_REG_EP0_INT_ENA), + usbf_ep_reg_readl(ep0, USBF_REG_EP0_CONTROL)); + + sts = ep0->status & (USBF_EP0_SETUP_INT | USBF_EP0_IN_INT | USBF_EP0_OUT_INT | + USBF_EP0_OUT_NULL_INT | USBF_EP0_STG_START_INT | + USBF_EP0_STG_END_INT); + + ret = 0; + do { + TRACEEP(ep0, "udc->ep0state=%d\n", udc->ep0state); + + prev_sts = sts; + prev_ep0state = udc->ep0state; + switch (udc->ep0state) { + case EP0_IDLE: + if (!(sts & USBF_EP0_SETUP_INT)) + break; + + sts &= ~USBF_EP0_SETUP_INT; + TRACEEP(ep0, "handle setup\n"); + ret = usbf_handle_ep0_setup(ep0); + break; + + case EP0_IN_DATA_PHASE: + if (!(sts & USBF_EP0_IN_INT)) + break; + + sts &= ~USBF_EP0_IN_INT; + TRACEEP(ep0, "handle in data phase\n"); + ret = usbf_handle_ep0_data_status(ep0, + "in data", EP0_OUT_STATUS_START_PHASE); + break; + + case EP0_OUT_STATUS_START_PHASE: + if (!(sts & USBF_EP0_STG_START_INT)) + break; + + sts &= ~USBF_EP0_STG_START_INT; + TRACEEP(ep0, "handle out status start phase\n"); + ret = usbf_handle_ep0_out_status_start(ep0); + break; + + case EP0_OUT_STATUS_PHASE: + if (!(sts & (USBF_EP0_OUT_INT | USBF_EP0_OUT_NULL_INT))) + break; + + sts &= ~(USBF_EP0_OUT_INT | USBF_EP0_OUT_NULL_INT); + TRACEEP(ep0, "handle out status phase\n"); + ret = usbf_handle_ep0_data_status(ep0, + "out status", + EP0_OUT_STATUS_END_PHASE); + break; + + case EP0_OUT_STATUS_END_PHASE: + if (!(sts & (USBF_EP0_STG_END_INT | USBF_EP0_SETUP_INT))) + break; + + sts &= ~USBF_EP0_STG_END_INT; + TRACEEP(ep0, "handle out status end phase\n"); + udc->ep0state = EP0_IDLE; + break; + + case EP0_OUT_DATA_PHASE: + if (!(sts & (USBF_EP0_OUT_INT | USBF_EP0_OUT_NULL_INT))) + break; + + sts &= ~(USBF_EP0_OUT_INT | USBF_EP0_OUT_NULL_INT); + TRACEEP(ep0, "handle out data phase\n"); + ret = usbf_handle_ep0_data_status(ep0, + "out data", EP0_IN_STATUS_START_PHASE); + break; + + case EP0_IN_STATUS_START_PHASE: + if (!(sts & USBF_EP0_STG_START_INT)) + break; + + sts &= ~USBF_EP0_STG_START_INT; + TRACEEP(ep0, "handle in status start phase\n"); + ret = usbf_handle_ep0_in_status_start(ep0); + break; + + case EP0_IN_STATUS_PHASE: + if (!(sts & USBF_EP0_IN_INT)) + break; + + sts &= ~USBF_EP0_IN_INT; + TRACEEP(ep0, "handle in status phase\n"); + ret = usbf_handle_ep0_data_status(ep0, + "in status", EP0_IN_STATUS_END_PHASE); + break; + + case EP0_IN_STATUS_END_PHASE: + if (!(sts & (USBF_EP0_STG_END_INT | USBF_EP0_SETUP_INT))) + break; + + sts &= ~USBF_EP0_STG_END_INT; + TRACEEP(ep0, "handle in status end\n"); + udc->ep0state = EP0_IDLE; + break; + + default: + udc->ep0state = EP0_IDLE; + break; + } + + if (ret) { + TRACEEP(ep0, "failed (%d)\n", ret); + /* Failure -> stall. + * This stall state will be automatically cleared when + * the IP receives the next SETUP packet + */ + usbf_ep_stall(ep0, true); + + /* Remove anything that was pending */ + usbf_ep_nuke(ep0, -EPROTO); + + udc->ep0state = EP0_IDLE; + break; + } + + } while ((prev_ep0state != udc->ep0state) || (prev_sts != sts)); + + TRACEEP(ep0, "done udc->ep0state=%d, status=0x%08x. next=0x%08x\n", + udc->ep0state, sts, + usbf_ep_reg_readl(ep0, USBF_REG_EP0_STATUS)); +} + +static void usbf_epn_process_queue(struct usbf_ep *epn) +{ + int ret; + + ret = usbf_ep_process_queue(epn); + switch (ret) { + case -ENOENT: + dev_warn(epn->udc->dev, "ep%d %s, no request available\n", + epn->id, epn->is_in ? "in" : "out"); + break; + case -EINPROGRESS: + /* More data needs to be processed */ + ret = 0; + break; + case 0: + /* All requests in the queue are processed */ + break; + default: + dev_err(epn->udc->dev, "ep%d %s, process queue failed (%d)\n", + epn->id, epn->is_in ? "in" : "out", ret); + break; + } + + if (ret) { + TRACEEP(epn, "ep%d %s failed (%d)\n", epn->id, + epn->is_in ? "in" : "out", ret); + usbf_ep_stall(epn, true); + usbf_ep_nuke(epn, ret); + } +} + +static void usbf_epn_interrupt(struct usbf_ep *epn) +{ + u32 sts; + u32 ena; + + epn->status = usbf_ep_reg_readl(epn, USBF_REG_EPN_STATUS); + ena = usbf_ep_reg_readl(epn, USBF_REG_EPN_INT_ENA); + usbf_ep_reg_writel(epn, USBF_REG_EPN_STATUS, ~(epn->status & ena)); + + TRACEEP(epn, "ep%d %s status=0x%08x, enable=%08x\n, ctrl=0x%08x\n", + epn->id, epn->is_in ? "in" : "out", epn->status, ena, + usbf_ep_reg_readl(epn, USBF_REG_EPN_CONTROL)); + + if (epn->disabled) { + dev_warn(epn->udc->dev, "ep%d %s, interrupt while disabled\n", + epn->id, epn->is_in ? "in" : "out"); + return; + } + + sts = epn->status & ena; + + if (sts & (USBF_EPN_IN_END_INT | USBF_EPN_IN_INT)) { + sts &= ~(USBF_EPN_IN_END_INT | USBF_EPN_IN_INT); + TRACEEP(epn, "ep%d %s process queue (in interrupts)\n", + epn->id, epn->is_in ? "in" : "out"); + usbf_epn_process_queue(epn); + } + + if (sts & (USBF_EPN_OUT_END_INT | USBF_EPN_OUT_INT | USBF_EPN_OUT_NULL_INT)) { + sts &= ~(USBF_EPN_OUT_END_INT | USBF_EPN_OUT_INT | USBF_EPN_OUT_NULL_INT); + TRACEEP(epn, "ep%d %s process queue (out interrupts)\n", + epn->id, epn->is_in ? "in" : "out"); + usbf_epn_process_queue(epn); + } + + TRACEEP(epn, "ep%d %s done status=0x%08x. next=0x%08x\n", + epn->id, epn->is_in ? "in" : "out", + sts, usbf_ep_reg_readl(epn, USBF_REG_EPN_STATUS)); +} + +static void usbf_ep_reset(struct usbf_ep *ep) +{ + ep->status = 0; + /* Remove anything that was pending */ + usbf_ep_nuke(ep, -ESHUTDOWN); +} + +static void usbf_reset(struct usbf_udc *udc) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(udc->ep); i++) { + if (udc->ep[i].disabled) + continue; + + usbf_ep_reset(&udc->ep[i]); + } + + if (usbf_reg_readl(udc, USBF_REG_USB_STATUS) & USBF_USB_SPEED_MODE) + udc->gadget.speed = USB_SPEED_HIGH; + else + udc->gadget.speed = USB_SPEED_FULL; + + /* Remote wakeup feature must be disabled on USB bus reset */ + udc->is_remote_wakeup = false; + + /* Enable endpoint zero */ + usbf_ep0_enable(&udc->ep[0]); + + if (udc->driver) { + /* Signal the reset */ + spin_unlock(&udc->lock); + usb_gadget_udc_reset(&udc->gadget, udc->driver); + spin_lock(&udc->lock); + } +} + +static void usbf_driver_suspend(struct usbf_udc *udc) +{ + if (udc->is_usb_suspended) { + TRACE("already suspended\n"); + return; + } + + TRACE("do usb suspend\n"); + udc->is_usb_suspended = true; + + if (udc->driver && udc->driver->suspend) { + spin_unlock(&udc->lock); + udc->driver->suspend(&udc->gadget); + spin_lock(&udc->lock); + + /* The datasheet tells to set the USB_CONTROL register SUSPEND + * bit when the USB bus suspend is detected. + * This bit stops the clocks (clocks for EPC, SIE, USBPHY) but + * these clocks seems not used only by the USB device. Some + * UARTs can be lost ... + * So, do not set the USB_CONTROL register SUSPEND bit. + */ + } +} + +static void usbf_driver_resume(struct usbf_udc *udc) +{ + if (!udc->is_usb_suspended) + return; + + TRACE("do usb resume\n"); + udc->is_usb_suspended = false; + + if (udc->driver && udc->driver->resume) { + spin_unlock(&udc->lock); + udc->driver->resume(&udc->gadget); + spin_lock(&udc->lock); + } +} + +static irqreturn_t usbf_epc_irq(int irq, void *_udc) +{ + struct usbf_udc *udc = (struct usbf_udc *)_udc; + unsigned long flags; + struct usbf_ep *ep; + u32 int_sts; + u32 int_en; + int i; + + spin_lock_irqsave(&udc->lock, flags); + + int_en = usbf_reg_readl(udc, USBF_REG_USB_INT_ENA); + int_sts = usbf_reg_readl(udc, USBF_REG_USB_INT_STA) & int_en; + usbf_reg_writel(udc, USBF_REG_USB_INT_STA, ~int_sts); + + TRACE("int_sts=0x%08x\n", int_sts); + + if (int_sts & USBF_USB_RSUM_INT) { + TRACE("handle resume\n"); + usbf_driver_resume(udc); + } + + if (int_sts & USBF_USB_USB_RST_INT) { + TRACE("handle bus reset\n"); + usbf_driver_resume(udc); + usbf_reset(udc); + } + + if (int_sts & USBF_USB_SPEED_MODE_INT) { + if (usbf_reg_readl(udc, USBF_REG_USB_STATUS) & USBF_USB_SPEED_MODE) + udc->gadget.speed = USB_SPEED_HIGH; + else + udc->gadget.speed = USB_SPEED_FULL; + TRACE("handle speed change (%s)\n", + udc->gadget.speed == USB_SPEED_HIGH ? "High" : "Full"); + } + + if (int_sts & USBF_USB_EPN_INT(0)) { + usbf_driver_resume(udc); + usbf_ep0_interrupt(&udc->ep[0]); + } + + for (i = 1; i < ARRAY_SIZE(udc->ep); i++) { + ep = &udc->ep[i]; + + if (int_sts & USBF_USB_EPN_INT(i)) { + usbf_driver_resume(udc); + usbf_epn_interrupt(ep); + } + } + + if (int_sts & USBF_USB_SPND_INT) { + TRACE("handle suspend\n"); + usbf_driver_suspend(udc); + } + + spin_unlock_irqrestore(&udc->lock, flags); + + return IRQ_HANDLED; +} + +static irqreturn_t usbf_ahb_epc_irq(int irq, void *_udc) +{ + struct usbf_udc *udc = (struct usbf_udc *)_udc; + unsigned long flags; + struct usbf_ep *epn; + u32 sysbint; + void (*ep_action)(struct usbf_ep *epn); + int i; + + spin_lock_irqsave(&udc->lock, flags); + + /* Read and ack interrupts */ + sysbint = usbf_reg_readl(udc, USBF_REG_AHBBINT); + usbf_reg_writel(udc, USBF_REG_AHBBINT, sysbint); + + if ((sysbint & USBF_SYS_VBUS_INT) == USBF_SYS_VBUS_INT) { + if (usbf_reg_readl(udc, USBF_REG_EPCTR) & USBF_SYS_VBUS_LEVEL) { + TRACE("handle vbus (1)\n"); + spin_unlock(&udc->lock); + usb_udc_vbus_handler(&udc->gadget, true); + usb_gadget_set_state(&udc->gadget, USB_STATE_POWERED); + spin_lock(&udc->lock); + } else { + TRACE("handle vbus (0)\n"); + udc->is_usb_suspended = false; + spin_unlock(&udc->lock); + usb_udc_vbus_handler(&udc->gadget, false); + usb_gadget_set_state(&udc->gadget, + USB_STATE_NOTATTACHED); + spin_lock(&udc->lock); + } + } + + for (i = 1; i < ARRAY_SIZE(udc->ep); i++) { + if (sysbint & USBF_SYS_DMA_ENDINT_EPN(i)) { + epn = &udc->ep[i]; + TRACEEP(epn, + "ep%d handle DMA complete. action=%ps\n", + epn->id, epn->bridge_on_dma_end); + ep_action = epn->bridge_on_dma_end; + if (ep_action) { + epn->bridge_on_dma_end = NULL; + ep_action(epn); + } + } + } + + spin_unlock_irqrestore(&udc->lock, flags); + + return IRQ_HANDLED; +} + +static int usbf_udc_start(struct usb_gadget *gadget, + struct usb_gadget_driver *driver) +{ + struct usbf_udc *udc = container_of(gadget, struct usbf_udc, gadget); + unsigned long flags; + + dev_info(udc->dev, "start (driver '%s')\n", driver->driver.name); + + spin_lock_irqsave(&udc->lock, flags); + + /* hook up the driver */ + udc->driver = driver; + + /* Enable VBUS interrupt */ + usbf_reg_writel(udc, USBF_REG_AHBBINTEN, USBF_SYS_VBUS_INTEN); + + spin_unlock_irqrestore(&udc->lock, flags); + + return 0; +} + +static int usbf_udc_stop(struct usb_gadget *gadget) +{ + struct usbf_udc *udc = container_of(gadget, struct usbf_udc, gadget); + unsigned long flags; + + spin_lock_irqsave(&udc->lock, flags); + + /* Disable VBUS interrupt */ + usbf_reg_writel(udc, USBF_REG_AHBBINTEN, 0); + + udc->driver = NULL; + + spin_unlock_irqrestore(&udc->lock, flags); + + dev_info(udc->dev, "stopped\n"); + + return 0; +} + +static int usbf_get_frame(struct usb_gadget *gadget) +{ + struct usbf_udc *udc = container_of(gadget, struct usbf_udc, gadget); + + return USBF_USB_GET_FRAME(usbf_reg_readl(udc, USBF_REG_USB_ADDRESS)); +} + +static void usbf_attach(struct usbf_udc *udc) +{ + /* Enable USB signal to Function PHY + * D+ signal Pull-up + * Disable endpoint 0, it will be automatically enable when a USB reset + * is received. + * Disable the other endpoints + */ + usbf_reg_clrset(udc, USBF_REG_USB_CONTROL, + USBF_USB_CONNECTB | USBF_USB_DEFAULT | USBF_USB_CONF, + USBF_USB_PUE2); + + /* Enable reset and mode change interrupts */ + usbf_reg_bitset(udc, USBF_REG_USB_INT_ENA, + USBF_USB_USB_RST_EN | USBF_USB_SPEED_MODE_EN | USBF_USB_RSUM_EN | USBF_USB_SPND_EN); +} + +static void usbf_detach(struct usbf_udc *udc) +{ + int i; + + /* Disable interrupts */ + usbf_reg_writel(udc, USBF_REG_USB_INT_ENA, 0); + + for (i = 0; i < ARRAY_SIZE(udc->ep); i++) { + if (udc->ep[i].disabled) + continue; + + usbf_ep_reset(&udc->ep[i]); + } + + /* Disable USB signal to Function PHY + * Do not Pull-up D+ signal + * Disable endpoint 0 + * Disable the other endpoints + */ + usbf_reg_clrset(udc, USBF_REG_USB_CONTROL, + USBF_USB_PUE2 | USBF_USB_DEFAULT | USBF_USB_CONF, + USBF_USB_CONNECTB); +} + +static int usbf_pullup(struct usb_gadget *gadget, int is_on) +{ + struct usbf_udc *udc = container_of(gadget, struct usbf_udc, gadget); + unsigned long flags; + + TRACE("is_on=%d\n", is_on); + + spin_lock_irqsave(&udc->lock, flags); + if (is_on) + usbf_attach(udc); + else + usbf_detach(udc); + spin_unlock_irqrestore(&udc->lock, flags); + + return 0; +} + +static int usbf_udc_set_selfpowered(struct usb_gadget *gadget, + int is_selfpowered) +{ + struct usbf_udc *udc = container_of(gadget, struct usbf_udc, gadget); + unsigned long flags; + + spin_lock_irqsave(&udc->lock, flags); + gadget->is_selfpowered = (is_selfpowered != 0); + spin_unlock_irqrestore(&udc->lock, flags); + + return 0; +} + +static int usbf_udc_wakeup(struct usb_gadget *gadget) +{ + struct usbf_udc *udc = container_of(gadget, struct usbf_udc, gadget); + unsigned long flags; + int ret; + + spin_lock_irqsave(&udc->lock, flags); + + if (!udc->is_remote_wakeup) { + TRACE("remote wakeup not allowed\n"); + ret = -EINVAL; + goto end; + } + + TRACE("do wakeup\n"); + + /* Send the resume signal */ + usbf_reg_bitset(udc, USBF_REG_USB_CONTROL, USBF_USB_RSUM_IN); + usbf_reg_bitclr(udc, USBF_REG_USB_CONTROL, USBF_USB_RSUM_IN); + + ret = 0; +end: + spin_unlock_irqrestore(&udc->lock, flags); + return ret; +} + +static struct usb_gadget_ops usbf_gadget_ops = { + .get_frame = usbf_get_frame, + .pullup = usbf_pullup, + .udc_start = usbf_udc_start, + .udc_stop = usbf_udc_stop, + .set_selfpowered = usbf_udc_set_selfpowered, + .wakeup = usbf_udc_wakeup, +}; + +static int usbf_epn_check(struct usbf_ep *epn) +{ + const char *type_txt; + const char *buf_txt; + int ret = 0; + u32 ctrl; + + ctrl = usbf_ep_reg_readl(epn, USBF_REG_EPN_CONTROL); + + switch (ctrl & USBF_EPN_MODE_MASK) { + case USBF_EPN_MODE_BULK: + type_txt = "bulk"; + if (epn->ep.caps.type_control || epn->ep.caps.type_iso || + !epn->ep.caps.type_bulk || epn->ep.caps.type_int) { + dev_err(epn->udc->dev, + "ep%d caps mismatch, bulk expected\n", epn->id); + ret = -EINVAL; + } + break; + case USBF_EPN_MODE_INTR: + type_txt = "intr"; + if (epn->ep.caps.type_control || epn->ep.caps.type_iso || + epn->ep.caps.type_bulk || !epn->ep.caps.type_int) { + dev_err(epn->udc->dev, + "ep%d caps mismatch, int expected\n", epn->id); + ret = -EINVAL; + } + break; + case USBF_EPN_MODE_ISO: + type_txt = "iso"; + if (epn->ep.caps.type_control || !epn->ep.caps.type_iso || + epn->ep.caps.type_bulk || epn->ep.caps.type_int) { + dev_err(epn->udc->dev, + "ep%d caps mismatch, iso expected\n", epn->id); + ret = -EINVAL; + } + break; + default: + type_txt = "unknown"; + dev_err(epn->udc->dev, "ep%d unknown type\n", epn->id); + ret = -EINVAL; + break; + } + + if (ctrl & USBF_EPN_BUF_TYPE_DOUBLE) { + buf_txt = "double"; + if (!usbf_ep_info[epn->id].is_double) { + dev_err(epn->udc->dev, + "ep%d buffer mismatch, double expected\n", + epn->id); + ret = -EINVAL; + } + } else { + buf_txt = "single"; + if (usbf_ep_info[epn->id].is_double) { + dev_err(epn->udc->dev, + "ep%d buffer mismatch, single expected\n", + epn->id); + ret = -EINVAL; + } + } + + dev_dbg(epn->udc->dev, "ep%d (%s) %s, %s buffer %u, checked %s\n", + epn->id, epn->ep.name, type_txt, buf_txt, + epn->ep.maxpacket_limit, ret ? "failed" : "ok"); + + return ret; +} + +static int usbf_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct usbf_udc *udc; + struct usbf_ep *ep; + int usb_role; + int irq; + int ret; + int i; + + usb_role = r9a06g032_sysctrl_get_usb_role(); + if (usb_role < 0) + return usb_role; + if (usb_role != USB_ROLE_DEVICE) { + dev_warn(dev, "USB device disabled\n"); + return -ENODEV; + } + + udc = devm_kzalloc(dev, sizeof(*udc), GFP_KERNEL); + if (!udc) + return -ENOMEM; + platform_set_drvdata(pdev, udc); + + udc->dev = dev; + spin_lock_init(&udc->lock); + + udc->regs = devm_platform_ioremap_resource(pdev, 0); + if (IS_ERR(udc->regs)) + return PTR_ERR(udc->regs); + + devm_pm_runtime_enable(&pdev->dev); + ret = pm_runtime_resume_and_get(&pdev->dev); + if (ret < 0) + return ret; + + dev_info(dev, "USBF version: %08x\n", + usbf_reg_readl(udc, USBF_REG_USBSSVER)); + + /* Resetting the PLL is handled via the clock driver as it has common + * registers with USB Host + */ + usbf_reg_bitclr(udc, USBF_REG_EPCTR, USBF_SYS_EPC_RST); + + /* modify in register gadget process */ + udc->gadget.speed = USB_SPEED_FULL; + udc->gadget.max_speed = USB_SPEED_HIGH; + udc->gadget.ops = &usbf_gadget_ops; + + udc->gadget.name = dev->driver->name; + udc->gadget.dev.parent = dev; + udc->gadget.ep0 = &udc->ep[0].ep; + + /* The hardware DMA controller needs dma addresses aligned on 32bit. + * A fallback to pio is done if DMA addresses are not aligned. + */ + udc->gadget.quirk_avoids_skb_reserve = 1; + + INIT_LIST_HEAD(&udc->gadget.ep_list); + /* we have a canned request structure to allow sending packets as reply + * to get_status requests + */ + INIT_LIST_HEAD(&udc->setup_reply.queue); + + for (i = 0; i < ARRAY_SIZE(udc->ep); i++) { + ep = &udc->ep[i]; + + if (!(usbf_reg_readl(udc, USBF_REG_USBSSCONF) & + USBF_SYS_EP_AVAILABLE(i))) { + continue; + } + + INIT_LIST_HEAD(&ep->queue); + + ep->id = i; + ep->disabled = 1; + ep->udc = udc; + ep->ep.ops = &usbf_ep_ops; + ep->ep.name = usbf_ep_info[i].name; + ep->ep.caps = usbf_ep_info[i].caps; + usb_ep_set_maxpacket_limit(&ep->ep, + usbf_ep_info[i].maxpacket_limit); + + if (ep->id == 0) { + ep->regs = ep->udc->regs + USBF_BASE_EP0; + } else { + ep->regs = ep->udc->regs + USBF_BASE_EPN(ep->id - 1); + ret = usbf_epn_check(ep); + if (ret) + return ret; + if (usbf_reg_readl(udc, USBF_REG_USBSSCONF) & + USBF_SYS_DMA_AVAILABLE(i)) { + ep->dma_regs = ep->udc->regs + + USBF_BASE_DMA_EPN(ep->id - 1); + } + list_add_tail(&ep->ep.ep_list, &udc->gadget.ep_list); + } + } + + irq = platform_get_irq(pdev, 0); + if (irq < 0) + return irq; + ret = devm_request_irq(dev, irq, usbf_epc_irq, 0, "usbf-epc", udc); + if (ret) { + dev_err(dev, "cannot request irq %d err %d\n", irq, ret); + return ret; + } + + irq = platform_get_irq(pdev, 1); + if (irq < 0) + return irq; + ret = devm_request_irq(dev, irq, usbf_ahb_epc_irq, 0, "usbf-ahb-epc", udc); + if (ret) { + dev_err(dev, "cannot request irq %d err %d\n", irq, ret); + return ret; + } + + usbf_reg_bitset(udc, USBF_REG_AHBMCTR, USBF_SYS_WBURST_TYPE); + + usbf_reg_bitset(udc, USBF_REG_USB_CONTROL, + USBF_USB_INT_SEL | USBF_USB_SOF_RCV | USBF_USB_SOF_CLK_MODE); + + ret = usb_add_gadget_udc(dev, &udc->gadget); + if (ret) + return ret; + + return 0; +} + +static int usbf_remove(struct platform_device *pdev) +{ + struct usbf_udc *udc = platform_get_drvdata(pdev); + + usb_del_gadget_udc(&udc->gadget); + + pm_runtime_put(&pdev->dev); + + return 0; +} + +static const struct of_device_id usbf_match[] = { + { .compatible = "renesas,rzn1-usbf" }, + {} /* sentinel */ +}; +MODULE_DEVICE_TABLE(of, usbf_match); + +static struct platform_driver udc_driver = { + .driver = { + .name = "usbf_renesas", + .owner = THIS_MODULE, + .of_match_table = usbf_match, + }, + .probe = usbf_probe, + .remove = usbf_remove, +}; + +module_platform_driver(udc_driver); + +MODULE_AUTHOR("Herve Codina "); +MODULE_DESCRIPTION("Renesas R-Car Gen3 & RZ/N1 USB Function driver"); +MODULE_LICENSE("GPL"); From patchwork Mon Nov 14 11:15:12 2022 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Herve Codina X-Patchwork-Id: 13042134 X-Patchwork-Delegate: geert@linux-m68k.org Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id A15AAC4167B for ; Mon, 14 Nov 2022 11:19:08 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S236589AbiKNLSh (ORCPT ); Mon, 14 Nov 2022 06:18:37 -0500 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:42212 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S236458AbiKNLRn (ORCPT ); Mon, 14 Nov 2022 06:17:43 -0500 Received: from relay3-d.mail.gandi.net (relay3-d.mail.gandi.net [IPv6:2001:4b98:dc4:8::223]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id DCA77642F; Mon, 14 Nov 2022 03:15:46 -0800 (PST) Received: (Authenticated sender: herve.codina@bootlin.com) by mail.gandi.net (Postfix) with ESMTPA id 5B6656000C; Mon, 14 Nov 2022 11:15:43 +0000 (UTC) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=bootlin.com; s=gm1; t=1668424545; h=from:from:reply-to:subject:subject:date:date:message-id:message-id: to:to:cc:cc:mime-version:mime-version: content-transfer-encoding:content-transfer-encoding: in-reply-to:in-reply-to:references:references; bh=qYstxmdNtV0DeBo1GgQhNnu+wwgOyx92wB5h3OanKjQ=; b=iYfs0GspcSL/oZR9hBwKvjRL/aofXnsZv0D8tL9PKvBAkedd3BP2tipjpYKZ8ZcqedIfPS ubAh2ow1hxzDi5bnQc9fAQefWcc/15okuV0tAlB86OUXSA8kjWdzoVHLQof8n15sMwNg/r aLqXwaBBop+rZYyOMeGtIqayHtOoMLQlcdQPznloln0Sur0EPS/oWNUZgOT8ahlwn7PHTl Kv+5CvNo4nAyhnfyUJu8UYyRlCWsQP/82TJiqmv00/TI8R7sr2EP8A2P0DZ2iISqn1VhEK 51hZnSwM/CCdp/DTkonmbXtTbmciCSA1SBxjNXIBaCXg8Bi8N+qiMHNGFsXBCg== From: Herve Codina To: Geert Uytterhoeven , Michael Turquette , Stephen Boyd , Rob Herring , Krzysztof Kozlowski , Herve Codina , Greg Kroah-Hartman , Magnus Damm , Gareth Williams Cc: linux-renesas-soc@vger.kernel.org, linux-clk@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-usb@vger.kernel.org, Thomas Petazzoni , Miquel Raynal Subject: [PATCH v2 6/7] ARM: dts: r9a06g032: Add the USBF controller node Date: Mon, 14 Nov 2022 12:15:12 +0100 Message-Id: <20221114111513.1436165-7-herve.codina@bootlin.com> X-Mailer: git-send-email 2.38.1 In-Reply-To: <20221114111513.1436165-1-herve.codina@bootlin.com> References: <20221114111513.1436165-1-herve.codina@bootlin.com> MIME-Version: 1.0 Precedence: bulk List-ID: X-Mailing-List: linux-renesas-soc@vger.kernel.org Add the USBF controller available in the r9a06g032 SoC. Signed-off-by: Herve Codina Reviewed-by: Geert Uytterhoeven --- arch/arm/boot/dts/r9a06g032.dtsi | 12 ++++++++++++ 1 file changed, 12 insertions(+) diff --git a/arch/arm/boot/dts/r9a06g032.dtsi b/arch/arm/boot/dts/r9a06g032.dtsi index 563024c9a4ae..a4bb069457a3 100644 --- a/arch/arm/boot/dts/r9a06g032.dtsi +++ b/arch/arm/boot/dts/r9a06g032.dtsi @@ -117,6 +117,18 @@ dmamux: dma-router@a0 { }; }; + udc: usb@4001e000 { + compatible = "renesas,r9a06g032-usbf", "renesas,rzn1-usbf"; + reg = <0x4001e000 0x2000>; + interrupts = , + ; + clocks = <&sysctrl R9A06G032_HCLK_USBF>, + <&sysctrl R9A06G032_HCLK_USBPM>; + clock-names = "hclkf", "hclkpm"; + power-domains = <&sysctrl>; + status = "disabled"; + }; + pci_usb: pci@40030000 { compatible = "renesas,pci-r9a06g032", "renesas,pci-rzn1"; device_type = "pci"; From patchwork Mon Nov 14 11:15:13 2022 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Herve Codina X-Patchwork-Id: 13042135 X-Patchwork-Delegate: geert@linux-m68k.org Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id 73064C3A5A7 for ; Mon, 14 Nov 2022 11:19:11 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S236147AbiKNLTI (ORCPT ); Mon, 14 Nov 2022 06:19:08 -0500 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:42476 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S236520AbiKNLRp (ORCPT ); Mon, 14 Nov 2022 06:17:45 -0500 Received: from relay3-d.mail.gandi.net (relay3-d.mail.gandi.net [IPv6:2001:4b98:dc4:8::223]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 0508CA190; Mon, 14 Nov 2022 03:15:49 -0800 (PST) Received: (Authenticated sender: herve.codina@bootlin.com) by mail.gandi.net (Postfix) with ESMTPA id 612D660004; Mon, 14 Nov 2022 11:15:46 +0000 (UTC) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=bootlin.com; s=gm1; t=1668424548; h=from:from:reply-to:subject:subject:date:date:message-id:message-id: to:to:cc:cc:mime-version:mime-version: content-transfer-encoding:content-transfer-encoding: in-reply-to:in-reply-to:references:references; bh=5UZmAHjc+nU5bxoFrl7cCvCg0uv7jGLLCbb1brlNZ+0=; b=EzwS1tlQ7fU2aYnUpqReVPgs645PoyGlScCGNIUPc+0CPYZMktpTBHPxxvhLd3Wb+ydXdG eBEeh9U0qcLYUupTNBakRa5DNt8mWUtebHqgeZo4re4CXTZJfrP0z2APrbKHBL0uwLwgB3 prgTPJXkndQY9cJsXGiIriexKji66VF/MMaownGhNt678YJNanhx+get9og0z8qBK5Y0it M0ca12r8atsumyscaroL0wM9GLTcFLw6Bbar0P8x5F+JO9+DoeTJiFyXWM2oBj7RhgQ4Xd pWZOEoOeF1orlKlewae70Sy8graGcnn6XhZBAEnRM4KTc5AHm6TuwPCBuJS1gA== From: Herve Codina To: Geert Uytterhoeven , Michael Turquette , Stephen Boyd , Rob Herring , Krzysztof Kozlowski , Herve Codina , Greg Kroah-Hartman , Magnus Damm , Gareth Williams Cc: linux-renesas-soc@vger.kernel.org, linux-clk@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-usb@vger.kernel.org, Thomas Petazzoni , Miquel Raynal Subject: [PATCH v2 7/7] MAINTAINERS: add the Renesas RZ/N1 USBF controller entry Date: Mon, 14 Nov 2022 12:15:13 +0100 Message-Id: <20221114111513.1436165-8-herve.codina@bootlin.com> X-Mailer: git-send-email 2.38.1 In-Reply-To: <20221114111513.1436165-1-herve.codina@bootlin.com> References: <20221114111513.1436165-1-herve.codina@bootlin.com> MIME-Version: 1.0 Precedence: bulk List-ID: X-Mailing-List: linux-renesas-soc@vger.kernel.org After contributing the driver, add myself as the maintainer for Renesas RZ/N1 USBF controller. Signed-off-by: Herve Codina Reviewed-by: Geert Uytterhoeven --- MAINTAINERS | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/MAINTAINERS b/MAINTAINERS index 379945f82a64..9ccac3275a88 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -17627,6 +17627,14 @@ S: Maintained F: Documentation/devicetree/bindings/rtc/renesas,rzn1-rtc.yaml F: drivers/rtc/rtc-rzn1.c +RENESAS RZ/N1 USBF CONTROLLER DRIVER +M: Herve Codina +L: linux-renesas-soc@vger.kernel.org +L: linux-usb@vger.kernel.org +S: Maintained +F: Documentation/devicetree/bindings/usb/renesas,usbf.yaml +F: drivers/usb/gadget/udc/renesas_usbf.c + RENESAS R-CAR GEN3 & RZ/N1 NAND CONTROLLER DRIVER M: Miquel Raynal L: linux-mtd@lists.infradead.org