From patchwork Thu Nov 17 10:31:31 2022 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Christoph Niedermaier X-Patchwork-Id: 13046567 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from bombadil.infradead.org (bombadil.infradead.org [198.137.202.133]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.lore.kernel.org (Postfix) with ESMTPS id 7F216C4332F for ; Thu, 17 Nov 2022 10:56:40 +0000 (UTC) DKIM-Signature: v=1; a=rsa-sha256; q=dns/txt; c=relaxed/relaxed; d=lists.infradead.org; s=bombadil.20210309; h=Sender: Content-Transfer-Encoding:Content-Type:List-Subscribe:List-Help:List-Post: List-Archive:List-Unsubscribe:List-Id:MIME-Version:References:In-Reply-To: Message-ID:Date:Subject:CC:To:From:Reply-To:Content-ID:Content-Description: Resent-Date:Resent-From:Resent-Sender:Resent-To:Resent-Cc:Resent-Message-ID: List-Owner; bh=dTTPCZ4BTK2S9Z2WkcAygiJFWAMzRX5l3zKe6RGBoiA=; b=yxW+1O7QXZWsMn Xmf2ee0uA8i1vQ0HMG8UfVuq+TD6dosrzYncAL7MGFdYRTVuTR23WoHbXN8BLEcUDc8WXs7gHXZdC ovrRNoX0VRF4ZStfLIGZHu0EPoSzmtJIa1JAomb2CHLkmicxQfogKRgoT5wwHRnWYrEI3Au4rc6LT 9OI2K6kaK0wyxStl/aTcOJrNbtUWe6oNFfoHjcW9r+u33NqZ7rWPUSqJJ7xvNv7RLL3ImV4Sqy7Ek XFLfHuOp8p+hJL7Sfos0CwIc4VKUKc6uoIgsWyZ/3FsJWnD0NOk4adCuCX3RZbuxnwx0LTjrTTVo6 p+b+PV4pz/g6XmmPI/3Q==; Received: from localhost ([::1] helo=bombadil.infradead.org) by bombadil.infradead.org with esmtp (Exim 4.94.2 #2 (Red Hat Linux)) id 1ovcYI-00Cq5m-Gz; Thu, 17 Nov 2022 10:55:26 +0000 Received: from mx3.securetransport.de ([2a01:4f8:c0c:92be::1]) by bombadil.infradead.org with esmtp (Exim 4.94.2 #2 (Red Hat Linux)) id 1ovcR6-00Ckqf-6k for linux-arm-kernel@lists.infradead.org; Thu, 17 Nov 2022 10:48:02 +0000 Received: from mail.dh-electronics.com (unknown [77.24.89.57]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by mx3.securetransport.de (Postfix) with ESMTPSA id CE4705DE01; Thu, 17 Nov 2022 11:47:26 +0100 (CET) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=dh-electronics.com; s=dhelectronicscom; t=1668682051; bh=zTSrdS3kM86aKfkHrUEP9OpidG/Duq7+i4ms6qZts9s=; h=From:To:CC:Subject:Date:In-Reply-To:References:From; b=wFFDvrTaIlQykfDJfW4AJ5q3pHpl0ULIIt3uZiDnzO09nrkDokR2sQXv3yhCLKf4X ap0hLo6zXq/1/4LtEYeNjWAGBDwSGMZmkesNiU3Ozp2lgAKXrGcRqEDhebnzWPvWWB PVTYrKjn0kwBr6Df5uRUovDXqN9QGVO0vsmBTkomjqbTcgY8uOQrVpdvIeNaTTJvZs 0L5PmsTFM/EdZIuyh02aHo79crmwMaVpCmktmTfJTzTgSc90e0Eq6bNs616VYsZpb3 fLVa37LpTFSMkpWk1GpgYOvCQ2QX4QP+qgJN/7iMzIi7hQ++g2A7MBv6H++mF7WbAa BiuB/TpyUVY7w== Received: from DHPWEX01.DH-ELECTRONICS.ORG (10.64.2.30) by DHPWEX01.DH-ELECTRONICS.ORG (10.64.2.30) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384) id 15.2.1118.20; Thu, 17 Nov 2022 11:32:21 +0100 Received: from Stretch-CN.dh-electronics.org (10.64.6.116) by DHPWEX01.DH-ELECTRONICS.ORG (10.64.2.30) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384) id 15.2.1118.20 via Frontend Transport; Thu, 17 Nov 2022 11:32:20 +0100 From: Christoph Niedermaier To: CC: Christoph Niedermaier , Rob Herring , Krzysztof Kozlowski , Peng Fan , Shawn Guo , Marek Vasut , Fabio Estevam , NXP Linux Team , , , Subject: [PATCH 1/4] dt-bindings: arm: fsl: Add PDK2, PicoITX and DRC02 boards for the DHCOM i.MX6ULL SoM Date: Thu, 17 Nov 2022 11:31:31 +0100 Message-ID: <20221117103134.6452-2-cniedermaier@dh-electronics.com> X-Mailer: git-send-email 2.11.0 X-klartext: yes In-Reply-To: <20221117103134.6452-1-cniedermaier@dh-electronics.com> References: <20221117103134.6452-1-cniedermaier@dh-electronics.com> MIME-Version: 1.0 X-CRM114-Version: 20100106-BlameMichelson ( TRE 0.8.0 (BSD) ) MR-646709E3 X-CRM114-CacheID: sfid-20221117_024800_596045_8230EC7D X-CRM114-Status: GOOD ( 11.34 ) X-BeenThere: linux-arm-kernel@lists.infradead.org X-Mailman-Version: 2.1.34 Precedence: list List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: "linux-arm-kernel" Errors-To: linux-arm-kernel-bounces+linux-arm-kernel=archiver.kernel.org@lists.infradead.org Add DH electronics DHCOM PDK2, PicoITX and DRC02 boards for the DHCOM i.MX6ULL SoM. Signed-off-by: Christoph Niedermaier Acked-by: Krzysztof Kozlowski --- Cc: Rob Herring Cc: Krzysztof Kozlowski Cc: Peng Fan Cc: Shawn Guo Cc: Marek Vasut Cc: Fabio Estevam Cc: NXP Linux Team Cc: kernel@dh-electronics.com Cc: devicetree@vger.kernel.org Cc: linux-kernel@vger.kernel.org To: linux-arm-kernel@lists.infradead.org --- Documentation/devicetree/bindings/arm/fsl.yaml | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/Documentation/devicetree/bindings/arm/fsl.yaml b/Documentation/devicetree/bindings/arm/fsl.yaml index 05b5276a0e14..ba7a17d8ec19 100644 --- a/Documentation/devicetree/bindings/arm/fsl.yaml +++ b/Documentation/devicetree/bindings/arm/fsl.yaml @@ -644,6 +644,16 @@ properties: - const: armadeus,imx6ull-opos6ul # OPOS6UL (i.MX6ULL) SoM - const: fsl,imx6ull + - description: i.MX6ULL DHCOM SoM based Boards + items: + - enum: + - dh,imx6ull-dhcom-pdk2 + - dh,imx6ull-dhcom-picoitx + - dh,imx6ull-dhcom-drc02 + - const: dh,imx6ull-dhcom-som # The DHCOR is soldered on the DHCOM + - const: dh,imx6ull-dhcor-som + - const: fsl,imx6ull + - description: i.MX6ULL PHYTEC phyBOARD-Segin items: - enum: From patchwork Thu Nov 17 10:31:32 2022 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Christoph Niedermaier X-Patchwork-Id: 13046605 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from bombadil.infradead.org (bombadil.infradead.org [198.137.202.133]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.lore.kernel.org (Postfix) with ESMTPS id B3919C4332F for ; Thu, 17 Nov 2022 11:11:59 +0000 (UTC) DKIM-Signature: v=1; a=rsa-sha256; q=dns/txt; c=relaxed/relaxed; d=lists.infradead.org; s=bombadil.20210309; h=Sender: Content-Transfer-Encoding:Content-Type:List-Subscribe:List-Help:List-Post: List-Archive:List-Unsubscribe:List-Id:MIME-Version:References:In-Reply-To: Message-ID:Date:Subject:CC:To:From:Reply-To:Content-ID:Content-Description: Resent-Date:Resent-From:Resent-Sender:Resent-To:Resent-Cc:Resent-Message-ID: List-Owner; bh=2jYTsqrorXLXofyFOz8GpaXsTta0iZGWqxWUPP05Td0=; b=RF9Y8ZPw3jGURl 5/Izr4GS5w6qS/qAw714Xr6JgU8u2Y9lruyXelM1QpMavcy0SsQJ2l0A4XEQ3twefq5IV3v0tfeWx 6tF5tqqg3Ytn7pIFV3JdgrnYPgNsSyUN3erXYSZLx6kAIW1WV1NrBbOBkiLWkHBOXvkCrZmB1SVZn wJ1ax0OIvwU2Nu6nyzMkXp6c+VgwlnqzbldgVQGcOLmaM30re+d596Hrc/h4yJqBUYKdHc4pyLLis OyP2L28NP5cE6Okk5jbw8lykIu0NJISwXTr4rsxPfmIdNJGuqJX0fhDCeKJt8TjiC1X0HChnC9lP+ CAhqKtRiYQ1Z0S7R4Ixw==; Received: from localhost ([::1] helo=bombadil.infradead.org) by bombadil.infradead.org with esmtp (Exim 4.94.2 #2 (Red Hat Linux)) id 1ovcn3-00CzLb-Dy; Thu, 17 Nov 2022 11:10:42 +0000 Received: from mx4.securetransport.de ([178.254.6.145]) by bombadil.infradead.org with esmtp (Exim 4.94.2 #2 (Red Hat Linux)) id 1ovcfp-00CtyY-6Q for linux-arm-kernel@lists.infradead.org; Thu, 17 Nov 2022 11:03:17 +0000 Received: from mail.dh-electronics.com (unknown [77.24.89.57]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by mx4.securetransport.de (Postfix) with ESMTPSA id A1596720111; Thu, 17 Nov 2022 12:02:32 +0100 (CET) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=dh-electronics.com; s=dhelectronicscom; t=1668682953; bh=MR0nft0q/aj1HJyabZA+4tsrHvNqdGqAhsw+COkdUAk=; h=From:To:CC:Subject:Date:In-Reply-To:References:From; b=RjsekfdxAr8NbXSsxsOj+FSJs6wyE9XSdgVYT4qP+/rIbojfhRqcHtQ6/xqq9QGW8 VYLVSWApt3bmSWziRmng0aK/XDw6Ng7eiYd4BUJjx7Bw9mEtuC8o94sS7tyaf3MqWY XxncKA66tlmMxtU12+BDSkU8ra5jyZ5Z6eT05rx2pGX81IO0Qczn2JyRnfycmxjPhC 4CVm6Ox1LCmMZLn20tNe1iCr99UtSkxOkvAP+SITtcav/dQH70aSukaWKM5QlKlorv KU2dmDiitkC1HwfPsf7irHvvqMmmxyPYXr3IXUsIZROpXMTE+SczmOvrioyRuav45t vU7rwGotdOPWA== Received: from DHPWEX01.DH-ELECTRONICS.ORG (10.64.2.30) by DHPWEX01.DH-ELECTRONICS.ORG (10.64.2.30) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384) id 15.2.1118.20; Thu, 17 Nov 2022 11:32:24 +0100 Received: from Stretch-CN.dh-electronics.org (10.64.6.116) by DHPWEX01.DH-ELECTRONICS.ORG (10.64.2.30) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384) id 15.2.1118.20 via Frontend Transport; Thu, 17 Nov 2022 11:32:24 +0100 From: Christoph Niedermaier To: CC: Christoph Niedermaier , Rob Herring , Krzysztof Kozlowski , Peng Fan , Shawn Guo , Marek Vasut , Fabio Estevam , NXP Linux Team , Subject: [PATCH 2/4] ARM: dts: imx6ull-dhcom: Add DH electronics DHCOM i.MX6ULL SoM and PDK2 board Date: Thu, 17 Nov 2022 11:31:32 +0100 Message-ID: <20221117103134.6452-3-cniedermaier@dh-electronics.com> X-Mailer: git-send-email 2.11.0 X-klartext: yes In-Reply-To: <20221117103134.6452-1-cniedermaier@dh-electronics.com> References: <20221117103134.6452-1-cniedermaier@dh-electronics.com> MIME-Version: 1.0 X-CRM114-Version: 20100106-BlameMichelson ( TRE 0.8.0 (BSD) ) MR-646709E3 X-CRM114-CacheID: sfid-20221117_030313_591210_F0BA206A X-CRM114-Status: GOOD ( 20.86 ) X-BeenThere: linux-arm-kernel@lists.infradead.org X-Mailman-Version: 2.1.34 Precedence: list List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: "linux-arm-kernel" Errors-To: linux-arm-kernel-bounces+linux-arm-kernel=archiver.kernel.org@lists.infradead.org Add support for DH electronics DHCOM SoM and PDK2 rev. 400 carrier board. This is an SoM with i.MX6ULL and an evaluation kit. The baseboard provides Ethernet, UART, USB, CAN and optional display. Signed-off-by: Christoph Niedermaier --- Cc: Rob Herring Cc: Krzysztof Kozlowski Cc: Peng Fan Cc: Shawn Guo Cc: Marek Vasut Cc: Fabio Estevam Cc: NXP Linux Team Cc: kernel@dh-electronics.com To: linux-arm-kernel@lists.infradead.org --- arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/imx6ull-dhcom-pdk2.dts | 219 +++++++++++ arch/arm/boot/dts/imx6ull-dhcom-som.dtsi | 619 +++++++++++++++++++++++++++++++ arch/arm/boot/dts/imx6ull-dhcor-som.dtsi | 247 ++++++++++++ 4 files changed, 1086 insertions(+) create mode 100644 arch/arm/boot/dts/imx6ull-dhcom-pdk2.dts create mode 100644 arch/arm/boot/dts/imx6ull-dhcom-som.dtsi create mode 100644 arch/arm/boot/dts/imx6ull-dhcor-som.dtsi diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index ab452c29d629..c4bde7c1ef57 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -739,6 +739,7 @@ dtb-$(CONFIG_SOC_IMX6UL) += \ imx6ull-colibri-wifi-eval-v3.dtb \ imx6ull-colibri-wifi-iris.dtb \ imx6ull-colibri-wifi-iris-v2.dtb \ + imx6ull-dhcom-pdk2.dtb \ imx6ull-jozacp.dtb \ imx6ull-kontron-bl.dtb \ imx6ull-myir-mys-6ulx-eval.dtb \ diff --git a/arch/arm/boot/dts/imx6ull-dhcom-pdk2.dts b/arch/arm/boot/dts/imx6ull-dhcom-pdk2.dts new file mode 100644 index 000000000000..4f31081cb550 --- /dev/null +++ b/arch/arm/boot/dts/imx6ull-dhcom-pdk2.dts @@ -0,0 +1,219 @@ +// SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause +/* + * Copyright (C) 2022 DH electronics GmbH + * + * DHCOM iMX6ULL variant: + * DHCM-iMX6ULL-C080-R051-F0409-SPI-E2-CAN2-RTC-WBT-ADC-I-01D2 + * DHCOR PCB number: 578-200 or newer + * DHCOM PCB number: 579-200 or newer + * PDK2 PCB number: 516-400 or newer + */ +/dts-v1/; + +#include "imx6ull-dhcom-som.dtsi" + +/ { + model = "DH electronics i.MX6ULL DHCOM on Premium Developer Kit (2)"; + compatible = "dh,imx6ull-dhcom-pdk2", "dh,imx6ull-dhcom-som", + "dh,imx6ull-dhcor-som", "fsl,imx6ull"; + + clk_ext_audio_codec: clock-codec { + #clock-cells = <0>; + clock-frequency = <24000000>; + compatible = "fixed-clock"; + }; + + display_bl: display-bl { + brightness-levels = <0 16 22 30 40 55 75 102 138 188 255>; + compatible = "pwm-backlight"; + default-brightness-level = <8>; + enable-gpios = <&gpio5 8 GPIO_ACTIVE_HIGH>; /* GPIO G */ + power-supply = <®_panel_3v3>; + pwms = <&pwm1 0 50000 PWM_POLARITY_INVERTED>; + status = "okay"; + }; + + gpio-keys { + compatible = "gpio-keys"; + + button-0 { + gpios = <&gpio5 0 GPIO_ACTIVE_LOW>; /* GPIO A */ + label = "TA1-GPIO-A"; + linux,code = ; + wakeup-source; + }; + + button-1 { + gpios = <&gpio5 1 GPIO_ACTIVE_LOW>; /* GPIO B */ + label = "TA2-GPIO-B"; + linux,code = ; + wakeup-source; + }; + + button-2 { + gpios = <&gpio5 2 GPIO_ACTIVE_LOW>; /* GPIO C */ + label = "TA3-GPIO-C"; + linux,code = ; + wakeup-source; + }; + + button-3 { + gpios = <&gpio5 3 GPIO_ACTIVE_LOW>; /* GPIO D */ + label = "TA4-GPIO-D"; + linux,code = ; + wakeup-source; + }; + }; + + led: led { + compatible = "gpio-leds"; + + /* + * Disable PDK2 LED5, because GPIO E is + * already used as touch interrupt. + */ + led-0 { + color = ; + default-state = "off"; + function = LED_FUNCTION_INDICATOR; + function-enumerator = <5>; /* PDK2 LED5 */ + gpios = <&gpio5 4 GPIO_ACTIVE_HIGH>; /* GPIO E */ + status = "disabled"; + }; + + led-1 { + color = ; + default-state = "off"; + function = LED_FUNCTION_INDICATOR; + function-enumerator = <6>; /* PDK2 LED6 */ + gpios = <&gpio5 7 GPIO_ACTIVE_HIGH>; /* GPIO F */ + }; + + /* + * Disable PDK2 LED7, because GPIO H is + * already used for WiFi pin WL_REG_ON. + */ + led-2 { + color = ; + default-state = "off"; + function = LED_FUNCTION_INDICATOR; + function-enumerator = <7>; /* PDK2 LED7 */ + gpios = <&gpio5 9 GPIO_ACTIVE_HIGH>; /* GPIO H */ + status = "disabled"; + }; + + /* + * Disable PDK2 LED8, because GPIO I is + * already used for BT pin BT_REG_ON. + */ + led-3 { + color = ; + default-state = "off"; + function = LED_FUNCTION_INDICATOR; + function-enumerator = <8>; /* PDK2 LED8 */ + gpios = <&gpio1 18 GPIO_ACTIVE_HIGH>; /* GPIO I */ + status = "disabled"; + }; + }; + + panel { + backlight = <&display_bl>; + compatible = "edt,etm0700g0edh6"; + power-supply = <®_panel_3v3>; + + port { + lcd_panel_in: endpoint { + remote-endpoint = <&lcd_display_out>; + }; + }; + }; + + reg_pdk2_24v: regulator-pdk2-24v { /* Filtered supply voltage */ + compatible = "regulator-fixed"; + regulator-always-on; + regulator-max-microvolt = <24000000>; + regulator-min-microvolt = <24000000>; + regulator-name = "24V_PDK2"; + }; + + reg_pdk2_3v3: regulator-pdk2-3v3 { /* PDK2 U35 */ + compatible = "regulator-fixed"; + regulator-always-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "3V3_PDK2"; + vin-supply = <®_pdk2_24v>; + }; + + reg_panel_3v3: regulator-panel-3v3 { /* 560-200 U1 */ + compatible = "regulator-fixed"; + regulator-always-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "3V3_PANEL"; + vin-supply = <®_pdk2_24v>; + }; + + sound { + compatible = "simple-audio-card"; + simple-audio-card,bitclock-master = <&dailink_master>; + simple-audio-card,format = "i2s"; + simple-audio-card,frame-master = <&dailink_master>; + simple-audio-card,name = "sgtl5000"; + simple-audio-card,routing = + "MIC_IN", "Mic Jack", + "Mic Jack", "Mic Bias", + "LINE_IN", "Line In Jack", + "Headphone Jack", "HP_OUT"; + simple-audio-card,widgets = + "Microphone", "Mic Jack", + "Line", "Line In Jack", + "Headphone", "Headphone Jack"; + + simple-audio-card,cpu { + sound-dai = <&sai2>; + }; + + dailink_master: simple-audio-card,codec { + clocks = <&clk_ext_audio_codec>; + sound-dai = <&sgtl5000>; + }; + }; +}; + +&i2c2 { /* DHCOM I2C1 */ + sgtl5000: codec@a { + #sound-dai-cells = <0>; + clocks = <&clk_ext_audio_codec>; + compatible = "fsl,sgtl5000"; + reg = <0x0a>; + VDDA-supply = <®_pdk2_3v3>; + VDDIO-supply = <®_pdk2_3v3>; + }; + + touchscreen@38 { + compatible = "edt,edt-ft5x06"; + interrupt-parent = <&gpio5>; + interrupts = <4 IRQ_TYPE_EDGE_FALLING>; /* GPIO E */ + power-supply = <®_panel_3v3>; + reg = <0x38>; + }; +}; + +&lcdif { + status = "okay"; + + port { + lcd_display_out: endpoint { + remote-endpoint = <&lcd_panel_in>; + }; + }; +}; + +&pwm1 { + status = "okay"; +}; + +&sai2 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx6ull-dhcom-som.dtsi b/arch/arm/boot/dts/imx6ull-dhcom-som.dtsi new file mode 100644 index 000000000000..aa4def9fdb6e --- /dev/null +++ b/arch/arm/boot/dts/imx6ull-dhcom-som.dtsi @@ -0,0 +1,619 @@ +// SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause +/* + * Copyright (C) 2022 DH electronics GmbH + */ + +#include "imx6ull-dhcor-som.dtsi" + +/ { + aliases { + /delete-property/ mmc0; /* Avoid double definitions */ + /delete-property/ mmc1; + /delete-property/ spi2; + /delete-property/ spi3; + i2c0 = &i2c2; + i2c1 = &i2c1; + mmc2 = &usdhc2; + rtc0 = &rtc_i2c; + rtc1 = &snvs_rtc; + serial0 = &uart1; + serial1 = &uart6; /* DHCOM UART2, special hardware required */ + serial2 = &uart3; + serial3 = &uart2; /* Use BT UART always as ttymxc3 */ + serial4 = &uart4; + serial5 = &uart5; + spi0 = &ecspi1; + spi1 = &ecspi4; /* DHCOM SPI2, special hardware required */ + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + reg_ext_3v3_ref: regulator-ext-3v3-ref { + compatible = "regulator-fixed"; + regulator-always-on; + regulator-max-microvolt = <3300000>; + regulator-min-microvolt = <3300000>; + regulator-name = "VCC_3V3_REF"; + }; + + reg_usb_otg1_vbus: regulator-usb-otg1-vbus { + compatible = "regulator-fixed"; + regulator-max-microvolt = <5000000>; + regulator-min-microvolt = <5000000>; + regulator-name = "usb-otg1-vbus"; + }; + + reg_usb_otg2_vbus: regulator-usb-otg2-vbus { + compatible = "regulator-fixed"; + gpio = <&gpio1 5 GPIO_ACTIVE_LOW>; + regulator-max-microvolt = <5000000>; + regulator-min-microvolt = <5000000>; + regulator-name = "usb-otg2-vbus"; + }; + + /* SoM with WiFi/BT: WiFi pin WL_REG_ON is connected to a DHCOM GPIO */ + /omit-if-no-ref/ usdhc1_pwrseq: usdhc1-pwrseq { + compatible = "mmc-pwrseq-simple"; + reset-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>; /* GPIO H */ + }; +}; + +/* SoM with WiFi/BT: BT pin BT_REG_ON is connected to a DHCOM GPIO */ +&bluetooth { + shutdown-gpios = <&gpio1 18 GPIO_ACTIVE_HIGH>; /* GPIO I */ +}; + +&can1 { + pinctrl-0 = <&pinctrl_flexcan1>; + pinctrl-names = "default"; + status = "okay"; +}; + +/* + * The signals for CAN2 TX and RX are routed to the DHCOM UART1 RTS/CTS pins. + * Only if this pins are used as CAN interface enable it on board layer. + */ +&can2 { + pinctrl-0 = <&pinctrl_flexcan2>; + pinctrl-names = "default"; +}; + +&ecspi1 { /* DHCOM SPI1 */ + cs-gpios = <&gpio3 26 GPIO_ACTIVE_LOW>; + pinctrl-0 = <&pinctrl_ecspi1>; + pinctrl-names = "default"; + status = "okay"; +}; + +/* + * Special hardware required that uses the pins of FEC2. Therefore this SPI + * interface can only be used if FEC2 is disabled. + */ +&ecspi4 { /* DHCOM SPI2 */ + cs-gpios = <&gpio2 15 GPIO_ACTIVE_LOW>; + pinctrl-0 = <&pinctrl_ecspi4>; + pinctrl-names = "default"; +}; + +&fec1 { /* DHCOM ETH1 */ + phy-handle = <&mdio2_phy0>; + phy-mode = "rmii"; + pinctrl-0 = <&pinctrl_fec1>; + pinctrl-names = "default"; + status = "okay"; +}; + +&fec2 { /* DHCOM ETH2 */ + phy-handle = <&mdio2_phy1>; + phy-mode = "rmii"; + pinctrl-0 = <&pinctrl_fec2>; + pinctrl-names = "default"; + status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + mdio2_phy0: ethernet-phy@0 { /* SMSC LAN8710Ai */ + clock-names = "rmii-ref"; + clocks = <&clks IMX6UL_CLK_ENET_REF>; + compatible = "ethernet-phy-id0007.c0f0", + "ethernet-phy-ieee802.3-c22"; + interrupt-parent = <&gpio5>; + interrupts = <5 IRQ_TYPE_LEVEL_LOW>; + pinctrl-0 = <&pinctrl_fec1_phy &pinctrl_snvs_fec1_phy>; + pinctrl-names = "default"; + reg = <0>; + reset-assert-us = <500>; + reset-deassert-us = <500>; + reset-gpios = <&gpio3 23 GPIO_ACTIVE_LOW>; + smsc,disable-energy-detect; /* Make plugin detection reliable */ + }; + + mdio2_phy1: ethernet-phy@1 { /* SMSC LAN8710Ai */ + clock-names = "rmii-ref"; + clocks = <&clks IMX6UL_CLK_ENET2_REF>; + compatible = "ethernet-phy-id0007.c0f0", + "ethernet-phy-ieee802.3-c22"; + interrupt-parent = <&gpio5>; + interrupts = <6 IRQ_TYPE_LEVEL_LOW>; + pinctrl-0 = <&pinctrl_fec2_phy &pinctrl_snvs_fec2_phy>; + pinctrl-names = "default"; + reg = <1>; + reset-assert-us = <500>; + reset-deassert-us = <500>; + reset-gpios = <&gpio3 24 GPIO_ACTIVE_LOW>; + smsc,disable-energy-detect; /* Make plugin detection reliable */ + }; + }; +}; + +&gpio1 { + gpio-line-names = + "", "", "", "", + "", "", "", "", + "", "", "", "DHCOM-INT", + "", "", "", "", + "", "", "DHCOM-I", "", + "", "", "", "", + "", "", "", "", + "", "", "", ""; + pinctrl-0 = <&pinctrl_spi1_switch + &pinctrl_dhcom_i &pinctrl_dhcom_int>; + pinctrl-names = "default"; +}; + +&gpio4 { + gpio-line-names = + "", "", "", "", + "", "", "", "", + "", "", "", "", + "", "", "", "", + "", "DHCOM-L", "DHCOM-K", "DHCOM-M", + "DHCOM-J", "DHCOM-U", "DHCOM-T", "DHCOM-S", + "DHCOM-R", "DHCOM-Q", "DHCOM-P", "DHCOM-O", + "DHCOM-N", "", "", ""; + pinctrl-0 = <&pinctrl_dhcom_j &pinctrl_dhcom_k + &pinctrl_dhcom_l &pinctrl_dhcom_m + &pinctrl_dhcom_n &pinctrl_dhcom_o + &pinctrl_dhcom_p &pinctrl_dhcom_q + &pinctrl_dhcom_r &pinctrl_dhcom_s + &pinctrl_dhcom_t &pinctrl_dhcom_u>; + pinctrl-names = "default"; +}; + +&gpio5 { + gpio-line-names = + "DHCOM-A", "DHCOM-B", "DHCOM-C", "DHCOM-D", + "DHCOM-E", "", "", "DHCOM-F", + "DHCOM-G", "DHCOM-H", "", "", + "", "", "", "", + "", "", "", "", + "", "", "", "", + "", "", "", "", + "", "", "", ""; + pinctrl-0 = <&pinctrl_snvs_dhcom_a &pinctrl_snvs_dhcom_b + &pinctrl_snvs_dhcom_c &pinctrl_snvs_dhcom_d + &pinctrl_snvs_dhcom_e &pinctrl_snvs_dhcom_f + &pinctrl_snvs_dhcom_g &pinctrl_snvs_dhcom_h>; + pinctrl-names = "default"; +}; + +&i2c1 { /* DHCOM I2C2 */ + rtc_i2c: rtc@32 { + compatible = "microcrystal,rv8803"; + reg = <0x32>; + }; + + eeprom@50 { /* Microchip 24AA025E48T-I/OT containing MAC for DHCOM ETH1 */ + compatible = "atmel,24c02"; + pagesize = <16>; + reg = <0x50>; + }; + + adc@51 { /* TI ADC101C027 */ + compatible = "ti,adc101c"; + reg = <0x51>; + vref-supply = <®_ext_3v3_ref>; + }; + + adc@52 { /* TI ADC101C027 */ + compatible = "ti,adc101c"; + reg = <0x52>; + vref-supply = <®_ext_3v3_ref>; + }; + + eeprom@53 { /* Microchip 24AA025E48T-I/OT containing MAC for DHCOM ETH2 */ + compatible = "atmel,24c02"; + pagesize = <16>; + reg = <0x53>; + }; +}; + +&i2c2 { /* DHCOM I2C1 */ + clock-frequency = <100000>; + pinctrl-0 = <&pinctrl_i2c2>; + pinctrl-1 = <&pinctrl_i2c2_gpio>; + pinctrl-names = "default", "gpio"; + scl-gpios = <&gpio1 30 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + sda-gpios = <&gpio1 31 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + status = "okay"; +}; + +&lcdif { + pinctrl-0 = <&pinctrl_lcdif>; + pinctrl-names = "default"; +}; + +&pwm1 { + pinctrl-0 = <&pinctrl_pwm1>; + pinctrl-names = "default"; +}; + +&sai2 { + assigned-clock-rates = <320000000>; + assigned-clocks = <&clks IMX6UL_CLK_PLL3_PFD2>; + pinctrl-0 = <&pinctrl_sai2>; + pinctrl-names = "default"; +}; + +&tsc { + measure-delay-time = <0xffff>; + pinctrl-0 = <&pinctrl_tsc>; + pinctrl-names = "default"; + pre-charge-time = <0xfff>; + touchscreen-average-samples = <32>; + xnur-gpio = <&gpio1 3 GPIO_ACTIVE_LOW>; +}; + +&uart1 { /* DHCOM UART1 */ + pinctrl-0 = <&pinctrl_uart1>; + pinctrl-names = "default"; + status = "okay"; +}; + +/* + * Special hardware required that uses DHCOM GPIO pins for DHCOM UART2. + * Therefore this UART interface can only be used if DHCOM GPIOs J/K/L/M are + * removed from GPIO hog muxing. + */ +&uart6 { /* DHCOM UART2 (alternative) */ + pinctrl-0 = <&pinctrl_uart6>; + pinctrl-names = "default"; + uart-has-rtscts; +}; + +&usbotg1 { + adp-disable; + disable-over-current; + dr_mode = "otg"; + hnp-disable; + pinctrl-0 = <&pinctrl_usbotg1>; + pinctrl-names = "default"; + srp-disable; + vbus-supply = <®_usb_otg1_vbus>; + status = "okay"; +}; + +&usbotg2 { + disable-over-current; /* Overcurrent pin is used for TSC */ + dr_mode = "host"; + pinctrl-0 = <&pinctrl_usbotg2>; + pinctrl-names = "default"; + tpl-support; + vbus-supply = <®_usb_otg2_vbus>; + status = "okay"; +}; + +&usbphy1 { + fsl,tx-d-cal = <106>; +}; + +&usbphy2 { + fsl,tx-d-cal = <106>; +}; + +&usdhc1 { /* WiFi on LGA */ + mmc-pwrseq = <&usdhc1_pwrseq>; +}; + +&usdhc2 { /* eMMC on module */ + bus-width = <8>; + no-1-8-v; + non-removable; + pinctrl-0 = <&pinctrl_usdhc2>; + pinctrl-names = "default"; + vmmc-supply = <&vcc_3v3>; + vqmmc-supply = <&vcc_3v3>; + status = "okay"; +}; + +&iomuxc { + /* DHCOM GPIOs I..U + INT_HIGHEST_PRIORITY */ + pinctrl_dhcom_i: dhcom-i-grp { + fsl,pins = ; + }; + + pinctrl_dhcom_j: dhcom-j-grp { + fsl,pins = ; + }; + + pinctrl_dhcom_k: dhcom-k-grp { + fsl,pins = ; + }; + + pinctrl_dhcom_l: dhcom-l-grp { + fsl,pins = ; + }; + + pinctrl_dhcom_m: dhcom-m-grp { + fsl,pins = ; + }; + + pinctrl_dhcom_n: dhcom-n-grp { + fsl,pins = ; + }; + + pinctrl_dhcom_o: dhcom-o-grp { + fsl,pins = ; + }; + + pinctrl_dhcom_p: dhcom-p-grp { + fsl,pins = ; + }; + + pinctrl_dhcom_q: dhcom-q-grp { + fsl,pins = ; + }; + + pinctrl_dhcom_r: dhcom-r-grp { + fsl,pins = ; + }; + + pinctrl_dhcom_s: dhcom-s-grp { + fsl,pins = ; + }; + + pinctrl_dhcom_t: dhcom-t-grp { + fsl,pins = ; + }; + + pinctrl_dhcom_u: dhcom-u-grp { + fsl,pins = ; + }; + + pinctrl_dhcom_int: dhcom-int-grp { + fsl,pins = ; + }; + + pinctrl_ecspi1: ecspi1-grp { + fsl,pins = < + MX6UL_PAD_LCD_DATA23__ECSPI1_MISO 0x100b1 + MX6UL_PAD_LCD_DATA22__ECSPI1_MOSI 0x100b1 + MX6UL_PAD_LCD_DATA20__ECSPI1_SCLK 0x100b1 + MX6UL_PAD_LCD_DATA21__GPIO3_IO26 0x1b0b0 /* SS0 */ + >; + }; + + pinctrl_ecspi4: ecspi4-grp { + fsl,pins = < + MX6UL_PAD_ENET2_TX_CLK__ECSPI4_MISO 0x100b1 + MX6UL_PAD_ENET2_TX_EN__ECSPI4_MOSI 0x100b1 + MX6UL_PAD_ENET2_TX_DATA1__ECSPI4_SCLK 0x100b1 + MX6UL_PAD_ENET2_RX_ER__GPIO2_IO15 0x1b0b0 /* SS0 */ + >; + }; + + pinctrl_fec1: fec1-grp { + fsl,pins = < + /* FEC1 uses MDIO bus from FEC2 */ + MX6UL_PAD_ENET1_RX_EN__ENET1_RX_EN 0x1b0b0 + MX6UL_PAD_ENET1_RX_ER__ENET1_RX_ER 0x1b0b0 + MX6UL_PAD_ENET1_RX_DATA0__ENET1_RDATA00 0x1b0b0 + MX6UL_PAD_ENET1_RX_DATA1__ENET1_RDATA01 0x1b0b0 + MX6UL_PAD_ENET1_TX_EN__ENET1_TX_EN 0x1b010 + MX6UL_PAD_ENET1_TX_DATA0__ENET1_TDATA00 0x1b010 + MX6UL_PAD_ENET1_TX_DATA1__ENET1_TDATA01 0x1b010 + MX6UL_PAD_ENET1_TX_CLK__ENET1_REF_CLK1 0x4001b010 + >; + }; + + pinctrl_fec1_phy: fec1-phy-grp { + fsl,pins = < + MX6UL_PAD_LCD_DATA18__GPIO3_IO23 0xb0 /* SMSC PHY reset */ + >; + }; + + pinctrl_fec2: fec2-grp { + fsl,pins = < + MX6UL_PAD_GPIO1_IO07__ENET2_MDC 0x1b0b0 + MX6UL_PAD_GPIO1_IO06__ENET2_MDIO 0x1b0b0 + MX6UL_PAD_ENET2_RX_EN__ENET2_RX_EN 0x1b0b0 + MX6UL_PAD_ENET2_RX_ER__ENET2_RX_ER 0x1b0b0 + MX6UL_PAD_ENET2_RX_DATA0__ENET2_RDATA00 0x1b0b0 + MX6UL_PAD_ENET2_RX_DATA1__ENET2_RDATA01 0x1b0b0 + MX6UL_PAD_ENET2_TX_EN__ENET2_TX_EN 0x1b010 + MX6UL_PAD_ENET2_TX_DATA0__ENET2_TDATA00 0x1b010 + MX6UL_PAD_ENET2_TX_DATA1__ENET2_TDATA01 0x1b010 + MX6UL_PAD_ENET2_TX_CLK__ENET2_REF_CLK2 0x4001b010 + >; + }; + + pinctrl_fec2_phy: fec2-phy-grp { + fsl,pins = < + MX6UL_PAD_LCD_DATA19__GPIO3_IO24 0xb0 /* SMSC PHY reset */ + >; + }; + + pinctrl_flexcan1: flexcan1-grp { + fsl,pins = < + MX6UL_PAD_UART3_RTS_B__FLEXCAN1_RX 0x1b020 + MX6UL_PAD_UART3_CTS_B__FLEXCAN1_TX 0x1b020 + >; + }; + + pinctrl_flexcan2: flexcan2-grp { + fsl,pins = < + MX6UL_PAD_UART2_RTS_B__FLEXCAN2_RX 0x1b020 + MX6UL_PAD_UART2_CTS_B__FLEXCAN2_TX 0x1b020 + >; + }; + + pinctrl_i2c2: i2c2-grp { + fsl,pins = < + MX6UL_PAD_UART5_TX_DATA__I2C2_SCL 0x4001b8b0 + MX6UL_PAD_UART5_RX_DATA__I2C2_SDA 0x4001b8b0 + >; + }; + + pinctrl_i2c2_gpio: i2c2-gpio-grp { + fsl,pins = < + MX6UL_PAD_UART5_TX_DATA__GPIO1_IO30 0x4001b8b0 + MX6UL_PAD_UART5_RX_DATA__GPIO1_IO31 0x4001b8b0 + >; + }; + + pinctrl_lcdif: lcdif-grp { + fsl,pins = < + MX6UL_PAD_LCD_CLK__LCDIF_CLK 0x79 + MX6UL_PAD_LCD_ENABLE__LCDIF_ENABLE 0x79 + MX6UL_PAD_LCD_HSYNC__LCDIF_HSYNC 0x79 + MX6UL_PAD_LCD_VSYNC__LCDIF_VSYNC 0x79 + MX6UL_PAD_LCD_DATA00__LCDIF_DATA00 0x79 + MX6UL_PAD_LCD_DATA01__LCDIF_DATA01 0x79 + MX6UL_PAD_LCD_DATA02__LCDIF_DATA02 0x79 + MX6UL_PAD_LCD_DATA03__LCDIF_DATA03 0x79 + MX6UL_PAD_LCD_DATA04__LCDIF_DATA04 0x79 + MX6UL_PAD_LCD_DATA05__LCDIF_DATA05 0x79 + MX6UL_PAD_LCD_DATA06__LCDIF_DATA06 0x79 + MX6UL_PAD_LCD_DATA07__LCDIF_DATA07 0x79 + MX6UL_PAD_LCD_DATA08__LCDIF_DATA08 0x79 + MX6UL_PAD_LCD_DATA09__LCDIF_DATA09 0x79 + MX6UL_PAD_LCD_DATA10__LCDIF_DATA10 0x79 + MX6UL_PAD_LCD_DATA11__LCDIF_DATA11 0x79 + MX6UL_PAD_LCD_DATA12__LCDIF_DATA12 0x79 + MX6UL_PAD_LCD_DATA13__LCDIF_DATA13 0x79 + MX6UL_PAD_LCD_DATA14__LCDIF_DATA14 0x79 + MX6UL_PAD_LCD_DATA15__LCDIF_DATA15 0x79 + MX6UL_PAD_LCD_DATA16__LCDIF_DATA16 0x79 + MX6UL_PAD_LCD_DATA17__LCDIF_DATA17 0x79 + >; + }; + + pinctrl_pwm1: pwm1-grp { + fsl,pins = < + MX6UL_PAD_GPIO1_IO08__PWM1_OUT 0x110b0 + >; + }; + + pinctrl_sai2: sai2-grp { + fsl,pins = < + MX6UL_PAD_JTAG_TCK__SAI2_RX_DATA 0x130b0 + MX6UL_PAD_JTAG_TDI__SAI2_TX_BCLK 0x17088 + MX6UL_PAD_JTAG_TDO__SAI2_TX_SYNC 0x17088 + MX6UL_PAD_JTAG_TRST_B__SAI2_TX_DATA 0x120b0 + >; + }; + + pinctrl_tsc: tsc-grp { + fsl,pins = < + MX6UL_PAD_GPIO1_IO01__GPIO1_IO01 0xb0 + MX6UL_PAD_GPIO1_IO02__GPIO1_IO02 0xb0 + MX6UL_PAD_GPIO1_IO03__GPIO1_IO03 0xb0 + MX6UL_PAD_GPIO1_IO04__GPIO1_IO04 0xb0 + >; + }; + + pinctrl_uart1: uart1-grp { + fsl,pins = < + MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX 0x1b0b1 + MX6UL_PAD_UART1_RX_DATA__UART1_DCE_RX 0x1b0b1 + >; + }; + + pinctrl_uart6: uart6-grp { + fsl,pins = < + MX6UL_PAD_CSI_MCLK__UART6_DCE_TX 0x1b0b1 + MX6UL_PAD_CSI_PIXCLK__UART6_DCE_RX 0x1b0b1 + MX6UL_PAD_CSI_VSYNC__UART6_DCE_RTS 0x1b0b1 + MX6UL_PAD_CSI_HSYNC__UART6_DCE_CTS 0x1b0b1 + >; + }; + + pinctrl_usbotg1: usbotg1-grp { + fsl,pins = < + MX6UL_PAD_GPIO1_IO00__ANATOP_OTG1_ID 0x17059 + >; + }; + + pinctrl_usbotg2: usbotg2-grp { + fsl,pins = < + MX6UL_PAD_GPIO1_IO05__GPIO1_IO05 0x120b0 + >; + }; + + pinctrl_usdhc2: usdhc2-grp { + fsl,pins = < + MX6UL_PAD_NAND_RE_B__USDHC2_CLK 0x10069 + MX6UL_PAD_NAND_WE_B__USDHC2_CMD 0x17059 + MX6UL_PAD_NAND_DATA00__USDHC2_DATA0 0x17059 + MX6UL_PAD_NAND_DATA01__USDHC2_DATA1 0x17059 + MX6UL_PAD_NAND_DATA02__USDHC2_DATA2 0x17059 + MX6UL_PAD_NAND_DATA03__USDHC2_DATA3 0x17059 + MX6UL_PAD_NAND_DATA04__USDHC2_DATA4 0x17059 + MX6UL_PAD_NAND_DATA05__USDHC2_DATA5 0x17059 + MX6UL_PAD_NAND_DATA06__USDHC2_DATA6 0x17059 + MX6UL_PAD_NAND_DATA07__USDHC2_DATA7 0x17059 + MX6UL_PAD_NAND_ALE__USDHC2_RESET_B 0x17059 /* SD2 Reset */ + >; + }; +}; + +&iomuxc_snvs { + /* DHCOM GPIOs A..H */ + pinctrl_snvs_dhcom_a: snvs-dhcom-a-grp { + fsl,pins = ; + }; + + pinctrl_snvs_dhcom_b: snvs-dhcom-b-grp { + fsl,pins = ; + }; + + pinctrl_snvs_dhcom_c: snvs-dhcom-c-grp { + fsl,pins = ; + }; + + pinctrl_snvs_dhcom_d: snvs-dhcom-d-grp { + fsl,pins = ; + }; + + pinctrl_snvs_dhcom_e: snvs-dhcom-e-grp { + fsl,pins = ; + }; + + pinctrl_snvs_dhcom_f: snvs-dhcom-f-grp { + fsl,pins = ; + }; + + pinctrl_snvs_dhcom_g: snvs-dhcom-g-grp { + fsl,pins = ; + }; + + pinctrl_snvs_dhcom_h: snvs-dhcom-h-grp { + fsl,pins = ; + }; + + pinctrl_snvs_fec1_phy: snvs-fec1-phy-grp { + fsl,pins = < + MX6ULL_PAD_SNVS_TAMPER5__GPIO5_IO05 0xb1 /* SMSC PHY Int */ + >; + }; + + pinctrl_snvs_fec2_phy: snvs-fec2-phy-grp { + fsl,pins = < + MX6ULL_PAD_SNVS_TAMPER6__GPIO5_IO06 0xb1 /* SMSC PHY Int */ + >; + }; +}; diff --git a/arch/arm/boot/dts/imx6ull-dhcor-som.dtsi b/arch/arm/boot/dts/imx6ull-dhcor-som.dtsi new file mode 100644 index 000000000000..4155458897e2 --- /dev/null +++ b/arch/arm/boot/dts/imx6ull-dhcor-som.dtsi @@ -0,0 +1,247 @@ +// SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause +/* + * Copyright (C) 2022 DH electronics GmbH + */ + +#include +#include +#include +#include +#include +#include "imx6ull.dtsi" + +/ { + memory@80000000 { /* Appropriate memory size will be filled by U-Boot */ + device_type = "memory"; + reg = <0x80000000 0>; + }; +}; + +&cpu0 { + fsl,soc-operating-points = < + /* KHz uV */ + 900000 1250000 + 792000 1250000 + 528000 1175000 + 396000 1175000 + 198000 1175000 + >; + operating-points = < + /* kHz uV */ + 900000 1275000 + 792000 1250000 + 528000 1175000 + 396000 1025000 + 198000 950000 + >; +}; + +&gpio1 { + pinctrl-0 = <&pinctrl_spi1_switch>; + pinctrl-names = "default"; + /* + * Pin SPI_BOOT_FLASH_EN (GPIO 1.9) is a switch for either using the + * DHCOM SPI1 interface or accessing the SPI bootflash. Both using + * ecspi1, but muxed to different pins. The DHCOM SPI1 interface uses + * the pins PAD_LCD_DATA21..23 and the SPI bootflash uses the pins + * PAD_CSI_DATA04..07. If the SPI bootflash is enabled the pins for + * DHCOM GPIOs N/O/P/Q/R/S/T/U aren't usable anymore, because they + * are used for the bus interface to the SPI bootflash. The GPIOs are + * disconnected by a buffer which is also controlled via the pin + * SPI_BOOT_FLASH_EN. Therefore the access to the bootflash is a + * special case and is disabled by setting GPIO 1.9 to high. + */ + spi1-switch-hog { + gpio-hog; + gpios = <9 0>; + output-high; + line-name = "spi1-switch"; + }; +}; + +&i2c1 { + clock-frequency = <100000>; + pinctrl-0 = <&pinctrl_i2c1>; + pinctrl-1 = <&pinctrl_i2c1_gpio>; + pinctrl-names = "default", "gpio"; + scl-gpios = <&gpio1 28 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + sda-gpios = <&gpio1 29 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + status = "okay"; + + pmic@58 { + compatible = "dlg,da9061"; + reg = <0x58>; + + onkey { + compatible = "dlg,da9061-onkey", "dlg,da9062-onkey"; + status = "disabled"; + }; + + regulators { + vdd_soc_in_1v4: buck1 { + regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <1400000>; + regulator-min-microvolt = <1400000>; + regulator-name = "vdd_soc_in_1v4"; + }; + + vcc_3v3: buck2 { + regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <3300000>; + regulator-min-microvolt = <3300000>; + regulator-name = "vcc_3v3"; + }; + + /* + * The current DRR3 memory can be supplied with a + * voltage of either 1.35V or 1.5V. For reasons of + * backward compatibility to only 1.5V DDR3 memory, + * the voltage is set to 1.5V. + */ + vcc_ddr_1v35: buck3 { + regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <1500000>; + regulator-min-microvolt = <1500000>; + regulator-name = "vcc_ddr_1v35"; + }; + + vcc_2v5: ldo1 { + regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <2500000>; + regulator-min-microvolt = <2500000>; + regulator-name = "vcc_2v5"; + }; + + vdd_snvs_in_3v3: ldo2 { + regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <3300000>; + regulator-min-microvolt = <3300000>; + regulator-name = "vdd_snvs_in_3v3"; + }; + + vcc_1v8: ldo3 { + regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <1800000>; + regulator-min-microvolt = <1800000>; + regulator-name = "vcc_1v8"; + }; + + vcc_1v2: ldo4 { + regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <1200000>; + regulator-min-microvolt = <1200000>; + regulator-name = "vcc_1v2"; + }; + }; + + thermal { + compatible = "dlg,da9061-thermal", "dlg,da9062-thermal"; + status = "disabled"; + }; + + watchdog { + compatible = "dlg,da9061-watchdog", "dlg,da9062-watchdog"; + status = "disabled"; + }; + }; +}; + +&ocotp { + read-only; /* Don't get write access by default */ +}; + +®_arm { + vin-supply = <&vdd_soc_in_1v4>; +}; + +®_soc { + vin-supply = <&vdd_soc_in_1v4>; +}; + +&uart2 { /* BT on LGA (BT_REG_ON is connected to LGA pin E1) */ + pinctrl-0 = <&pinctrl_uart2>; + pinctrl-names = "default"; + uart-has-rtscts; + status = "okay"; + + /* + * Actually, the maximum speed of the chip is 4MBdps, but there are + * limitations that prevent this speed. It hasn't yet been figured out + * what the reason for this is. Currently, the maximum speed of 3MBdps + * can be used without any problems. If the limitation can be overcome, + * the speed can be increased accordingly. + */ + bluetooth: bluetooth { /* muRata 1DX */ + compatible = "brcm,bcm43430a1-bt"; + max-speed = <3000000>; + vbat-supply = <&vcc_3v3>; + vddio-supply = <&vcc_3v3>; + }; +}; + +&usdhc1 { /* WiFi on LGA (WL_REG_ON is connected to LGA pin E3) */ + #address-cells = <1>; + #size-cells = <0>; + bus-width = <4>; + no-1-8-v; + non-removable; + keep-power-in-suspend; + pinctrl-0 = <&pinctrl_usdhc1_wifi>; + pinctrl-names = "default"; + wakeup-source; + status = "okay"; + + brcmf: wifi@1 { /* muRata 1DX */ + compatible = "brcm,bcm4329-fmac"; + reg = <1>; + }; +}; + +&iomuxc { + pinctrl_i2c1: i2c1-grp { + fsl,pins = < + MX6UL_PAD_UART4_TX_DATA__I2C1_SCL 0x4001b8b0 + MX6UL_PAD_UART4_RX_DATA__I2C1_SDA 0x4001b8b0 + >; + }; + + pinctrl_i2c1_gpio: i2c1-gpio-grp { + fsl,pins = < + MX6UL_PAD_UART4_TX_DATA__GPIO1_IO28 0x4001b8b0 + MX6UL_PAD_UART4_RX_DATA__GPIO1_IO29 0x4001b8b0 + >; + }; + + pinctrl_spi1_switch: spi1-switch-grp { + fsl,pins = < + MX6UL_PAD_GPIO1_IO09__GPIO1_IO09 0x120b0 /* SPI_BOOT_FLASH_EN */ + >; + }; + + pinctrl_uart2: uart2-grp { + fsl,pins = < + MX6UL_PAD_UART2_TX_DATA__UART2_DCE_TX 0x1b0b1 + MX6UL_PAD_UART2_RX_DATA__UART2_DCE_RX 0x1b0b1 + MX6UL_PAD_UART3_RX_DATA__UART2_DCE_RTS 0x1b0b1 + MX6UL_PAD_UART3_TX_DATA__UART2_DCE_CTS 0x1b0b1 + >; + }; + + pinctrl_usdhc1_wifi: usdhc1-wifi-grp { + fsl,pins = < + MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x1b0b0 + MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x10010 + MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x1b0b0 + MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x1b0b0 + MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x1b0b0 + MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x1b0b0 + >; + }; +}; From patchwork Thu Nov 17 10:31:33 2022 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Christoph Niedermaier X-Patchwork-Id: 13046549 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from bombadil.infradead.org (bombadil.infradead.org [198.137.202.133]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.lore.kernel.org (Postfix) with ESMTPS id 63390C4332F for ; Thu, 17 Nov 2022 10:42:27 +0000 (UTC) DKIM-Signature: v=1; a=rsa-sha256; q=dns/txt; c=relaxed/relaxed; d=lists.infradead.org; s=bombadil.20210309; h=Sender: Content-Transfer-Encoding:Content-Type:List-Subscribe:List-Help:List-Post: List-Archive:List-Unsubscribe:List-Id:MIME-Version:References:In-Reply-To: Message-ID:Date:Subject:CC:To:From:Reply-To:Content-ID:Content-Description: Resent-Date:Resent-From:Resent-Sender:Resent-To:Resent-Cc:Resent-Message-ID: List-Owner; bh=b+aHHR0P3LiHFaTryp3sNlAL8reuEvE5v5MqaFpFxdI=; b=4+oTjgRWCEfhpu uhShngdufJebQyCtypwYf9iYPxZE9/PfsuyIfnZ9mCRmiw12CjXVN3mqO0g/YtpWfmaB6rzcs9cRp /gbYNbVFTwu6JJvRB8TqTbpfG94oflmNZ7pj+QigH3ZdO/scTjKRfqfYiboE8dqYZBLWrL2NDCipn NP/51JgOUtwDeN+lEKeKPqTFLuQtnlkRemUz8+dIKH7SRyxdFQK6OpxCZBGaF35ymbHYxBRJpBB6Y D8dVo2xbssngiXFTVP2oaej/nZ4wv4gkGNSX4DPSxrpu4SjNMRc7/8PPaeqP5IETnOQD5nN0lOmGD RuZz2S/ELL6RtlVrsckg==; Received: from localhost ([::1] helo=bombadil.infradead.org) by bombadil.infradead.org with esmtp (Exim 4.94.2 #2 (Red Hat Linux)) id 1ovcKV-00Cgoi-AG; Thu, 17 Nov 2022 10:41:11 +0000 Received: from mx2.securetransport.de ([188.68.39.254]) by bombadil.infradead.org with esmtp (Exim 4.94.2 #2 (Red Hat Linux)) id 1ovcCv-00CbPO-7a for linux-arm-kernel@lists.infradead.org; Thu, 17 Nov 2022 10:33:24 +0000 Received: from mail.dh-electronics.com (unknown [77.24.89.57]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by mx2.securetransport.de (Postfix) with ESMTPSA id 662635EA65; Thu, 17 Nov 2022 11:32:38 +0100 (CET) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=dh-electronics.com; s=dhelectronicscom; t=1668681158; bh=7VwSM/5OIwS1sCNdH77lxknZQuWeQdxBD1LJoHCtMDw=; h=From:To:CC:Subject:Date:In-Reply-To:References:From; b=rrUgqLf1NKjjCN9DWlGvmSKbILUhnLQaqBY2rxN6CCLUwdansqWmfIMCYLoiVLvns AmIlBdzSLt8h/iuEd5d+8iZ6CSqm/SCJnBRrkFcPT4o/txZ4kPa5MoJZe/bNYhjC4X 6kUKaj66G/CK2Y/DETXlX9x5/Cx717R5NemF6W30Wn15ODH3CwP2MlYESZuzbGAaSE jYeDeEDzTHthxkraqm/O3j8MnbOYjPOi7O88+NEgHDpwXU+nmtTeEl9ncttJ9sLoT6 sGJ3obl05msIWWHXQAidoncuYR2sZhnDZdb9H14Pe4USENouDEHeDM2b+kWZpYhxSY Ue8fLoECKaLRg== Received: from DHPWEX01.DH-ELECTRONICS.ORG (10.64.2.30) by DHPWEX01.DH-ELECTRONICS.ORG (10.64.2.30) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384) id 15.2.1118.20; Thu, 17 Nov 2022 11:32:33 +0100 Received: from Stretch-CN.dh-electronics.org (10.64.6.116) by DHPWEX01.DH-ELECTRONICS.ORG (10.64.2.30) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384) id 15.2.1118.20 via Frontend Transport; Thu, 17 Nov 2022 11:32:33 +0100 From: Christoph Niedermaier To: CC: Christoph Niedermaier , Rob Herring , Krzysztof Kozlowski , Peng Fan , Shawn Guo , Marek Vasut , Fabio Estevam , NXP Linux Team , Subject: [PATCH 3/4] ARM: dts: imx6ull-dhcom: Add DHCOM based PicoITX board Date: Thu, 17 Nov 2022 11:31:33 +0100 Message-ID: <20221117103134.6452-4-cniedermaier@dh-electronics.com> X-Mailer: git-send-email 2.11.0 X-klartext: yes In-Reply-To: <20221117103134.6452-1-cniedermaier@dh-electronics.com> References: <20221117103134.6452-1-cniedermaier@dh-electronics.com> MIME-Version: 1.0 X-CRM114-Version: 20100106-BlameMichelson ( TRE 0.8.0 (BSD) ) MR-646709E3 X-CRM114-CacheID: sfid-20221117_023321_485434_3F50D263 X-CRM114-Status: GOOD ( 20.54 ) X-BeenThere: linux-arm-kernel@lists.infradead.org X-Mailman-Version: 2.1.34 Precedence: list List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: "linux-arm-kernel" Errors-To: linux-arm-kernel-bounces+linux-arm-kernel=archiver.kernel.org@lists.infradead.org Add DT for DH PicoITX unit, which is a bare-bones carrier board for the DHCOM. The board has ethernet port, USB, CAN, LED and a custom board-to-board expansion connector. For this board a DHCOM i.MX6ULL SoM configuration without WiFi/BT is used. The interface is used for the SD card instead. Make this adjustment by using a separate DT include file. Signed-off-by: Christoph Niedermaier --- Cc: Rob Herring Cc: Krzysztof Kozlowski Cc: Peng Fan Cc: Shawn Guo Cc: Marek Vasut Cc: Fabio Estevam Cc: NXP Linux Team Cc: kernel@dh-electronics.com To: linux-arm-kernel@lists.infradead.org --- arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/imx6ull-dhcom-picoitx.dts | 101 +++++++++++++++++++++ .../arm/boot/dts/imx6ull-dhcom-som-cfg-sdcard.dtsi | 96 ++++++++++++++++++++ 3 files changed, 198 insertions(+) create mode 100644 arch/arm/boot/dts/imx6ull-dhcom-picoitx.dts create mode 100644 arch/arm/boot/dts/imx6ull-dhcom-som-cfg-sdcard.dtsi diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index c4bde7c1ef57..9ae8af0c1459 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -740,6 +740,7 @@ dtb-$(CONFIG_SOC_IMX6UL) += \ imx6ull-colibri-wifi-iris.dtb \ imx6ull-colibri-wifi-iris-v2.dtb \ imx6ull-dhcom-pdk2.dtb \ + imx6ull-dhcom-picoitx.dtb \ imx6ull-jozacp.dtb \ imx6ull-kontron-bl.dtb \ imx6ull-myir-mys-6ulx-eval.dtb \ diff --git a/arch/arm/boot/dts/imx6ull-dhcom-picoitx.dts b/arch/arm/boot/dts/imx6ull-dhcom-picoitx.dts new file mode 100644 index 000000000000..36ab94bff047 --- /dev/null +++ b/arch/arm/boot/dts/imx6ull-dhcom-picoitx.dts @@ -0,0 +1,101 @@ +// SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause +/* + * Copyright (C) 2022 DH electronics GmbH + * + * DHCOM iMX6ULL variant: + * DHCM-iMX6ULL-C080-R051-F0409-SPI-E2-CAN2-SD-RTC-ADC-I-01D2 + * DHCOR PCB number: 578-200 or newer + * DHCOM PCB number: 579-200 or newer + * PicoITX PCB number: 487-600 or newer + */ +/dts-v1/; + +#include "imx6ull-dhcom-som.dtsi" +#include "imx6ull-dhcom-som-cfg-sdcard.dtsi" + +/ { + model = "DH electronics i.MX6ULL DHCOM on PicoITX"; + compatible = "dh,imx6ull-dhcom-picoitx", "dh,imx6ull-dhcom-som", + "dh,imx6ull-dhcor-som", "fsl,imx6ull"; + + led { + compatible = "gpio-leds"; + + led-0 { + color = ; + default-state = "off"; + function = LED_FUNCTION_INDICATOR; + gpios = <&gpio4 8 GPIO_ACTIVE_HIGH>; /* GPIO I */ + }; + }; +}; + +&fec1 { + phy-handle = <&mdio1_phy0>; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + mdio1_phy0: ethernet-phy@0 { /* SMSC LAN8710Ai */ + clock-names = "rmii-ref"; + clocks = <&clks IMX6UL_CLK_ENET_REF>; + compatible = "ethernet-phy-id0007.c0f0", + "ethernet-phy-ieee802.3-c22"; + interrupt-parent = <&gpio5>; + interrupts = <5 IRQ_TYPE_LEVEL_LOW>; + pinctrl-0 = <&pinctrl_fec1_phy &pinctrl_snvs_fec1_phy>; + pinctrl-names = "default"; + reg = <0>; + reset-assert-us = <500>; + reset-deassert-us = <500>; + reset-gpios = <&gpio3 23 GPIO_ACTIVE_LOW>; + smsc,disable-energy-detect; /* Make plugin detection reliable */ + }; + }; +}; + +&fec2 { + status = "disabled"; +}; + +&gpio4 { + gpio-line-names = + "", "", "", "", + "", "", "", "", + "", "", "", "", + "", "", "", "", + "", "PicoITX-HW2", "PicoITX-HW1", "DHCOM-M", + "PicoITX-HW0", "DHCOM-U", "DHCOM-T", "DHCOM-S", + "DHCOM-R", "DHCOM-Q", "DHCOM-P", "DHCOM-O", + "DHCOM-N", "", "", ""; +}; + +&gpio5 { + gpio-line-names = + "DHCOM-A", "DHCOM-B", "PicoITX-In2", "PicoITX-Out2", + "PicoITX-In1", "", "", "PicoITX-Out1", + "DHCOM-G", "DHCOM-H", "", "", + "", "", "", "", + "", "", "", "", + "", "", "", "", + "", "", "", "", + "", "", "", ""; +}; + +&iomuxc { + pinctrl_fec1: fec1-grp { + fsl,pins = < + MX6UL_PAD_GPIO1_IO07__ENET1_MDC 0x1b0b0 + MX6UL_PAD_GPIO1_IO06__ENET1_MDIO 0x1b0b0 + MX6UL_PAD_ENET1_RX_EN__ENET1_RX_EN 0x1b0b0 + MX6UL_PAD_ENET1_RX_ER__ENET1_RX_ER 0x1b0b0 + MX6UL_PAD_ENET1_RX_DATA0__ENET1_RDATA00 0x1b0b0 + MX6UL_PAD_ENET1_RX_DATA1__ENET1_RDATA01 0x1b0b0 + MX6UL_PAD_ENET1_TX_EN__ENET1_TX_EN 0x1b010 + MX6UL_PAD_ENET1_TX_DATA0__ENET1_TDATA00 0x1b010 + MX6UL_PAD_ENET1_TX_DATA1__ENET1_TDATA01 0x1b010 + MX6UL_PAD_ENET1_TX_CLK__ENET1_REF_CLK1 0x4001b010 + >; + }; +}; diff --git a/arch/arm/boot/dts/imx6ull-dhcom-som-cfg-sdcard.dtsi b/arch/arm/boot/dts/imx6ull-dhcom-som-cfg-sdcard.dtsi new file mode 100644 index 000000000000..e20495894f91 --- /dev/null +++ b/arch/arm/boot/dts/imx6ull-dhcom-som-cfg-sdcard.dtsi @@ -0,0 +1,96 @@ +// SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause +/* + * Copyright (C) 2022 DH electronics GmbH + */ + +/* + * Special SoM configuration: SD card + * + * Enabled: Micro SD card on module or + * external SD card via DHCOM depends on hardware variant + * GPIO H and GPIO I will be available + * DHCOM UART2 will be available + * Disabled: WiFi and BT + */ + +/* + * To use usdhc1 as SD card, the WiFi node must be deleted. + * BT is also not available, so remove BT from the UART node. + */ +/delete-node/ &brcmf; +/delete-node/ &bluetooth; + +/ { + aliases { + mmc1 = &usdhc1; + serial0 = &uart1; + serial1 = &uart2; + serial2 = &uart3; + serial3 = &uart4; + serial4 = &uart5; + serial5 = &uart6; + }; + + reg_sd1_vmmc: regulator-sd1-vmmc { + compatible = "regulator-fixed"; + regulator-max-microvolt = <3300000>; + regulator-min-microvolt = <3300000>; + regulator-name = "VSD_3V3"; + }; +}; + +&usdhc1 { /* Micro SD card on module or external SD card via DHCOM */ + /delete-property/ #address-cells; + /delete-property/ #size-cells; + /delete-property/ keep-power-in-suspend; + /delete-property/ mmc-pwrseq; + /delete-property/ non-removable; + /delete-property/ wakeup-source; + cd-gpios = <&gpio1 19 GPIO_ACTIVE_LOW>; + no-1-8-v; + pinctrl-0 = <&pinctrl_usdhc1>; + pinctrl-1 = <&pinctrl_usdhc1_100mhz>; + pinctrl-2 = <&pinctrl_usdhc1_200mhz>; + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + vmmc-supply = <®_sd1_vmmc>; + status = "okay"; +}; + +&iomuxc { + pinctrl_usdhc1: usdhc1-grp { + fsl,pins = < + MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x17059 + MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x10059 + MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x17059 + MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x17059 + MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x17059 + MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x17059 + MX6UL_PAD_UART1_RTS_B__GPIO1_IO19 0x120b0 /* SD1 CD */ + >; + }; + + pinctrl_usdhc1_100mhz: usdhc1-100mhz-grp { + fsl,pins = < + MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x170b9 + MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x100b9 + MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x170b9 + MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x170b9 + MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x170b9 + MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x170b9 + MX6UL_PAD_UART1_RTS_B__GPIO1_IO19 0x120b0 /* SD1 CD */ + + >; + }; + + pinctrl_usdhc1_200mhz: usdhc1-200mhz-grp { + fsl,pins = < + MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x170f9 + MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x100f9 + MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x170f9 + MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x170f9 + MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x170f9 + MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x170f9 + MX6UL_PAD_UART1_RTS_B__GPIO1_IO19 0x120b0 /* SD1 CD */ + >; + }; +}; From patchwork Thu Nov 17 10:31:34 2022 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Christoph Niedermaier X-Patchwork-Id: 13046618 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from bombadil.infradead.org (bombadil.infradead.org [198.137.202.133]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.lore.kernel.org (Postfix) with ESMTPS id 71DF0C43217 for ; Thu, 17 Nov 2022 11:19:18 +0000 (UTC) DKIM-Signature: v=1; a=rsa-sha256; q=dns/txt; c=relaxed/relaxed; d=lists.infradead.org; s=bombadil.20210309; h=Sender: Content-Transfer-Encoding:Content-Type:List-Subscribe:List-Help:List-Post: List-Archive:List-Unsubscribe:List-Id:MIME-Version:References:In-Reply-To: Message-ID:Date:Subject:CC:To:From:Reply-To:Content-ID:Content-Description: Resent-Date:Resent-From:Resent-Sender:Resent-To:Resent-Cc:Resent-Message-ID: List-Owner; bh=lOKvGjHKPi8xTZYGKGL3g2vvb3NfS7NziWYpYL4Dmvs=; b=ZAuKhOxNHpw2eB wz7Dtqd+VHcXuMFd4JYRIfWdvof7gKU9j8VnfxAjcfzpFDnq/dvfrNjokm1XeCm+uKQo3aYgz6fcn uZR/47SK29nL2fawtLp+LztHh7hSM9uBSr2rDsc18wq7byJJA0k8bX8ROd6YlihkrkPDF8EMUeXrC FwbjVs+aVmHDI00h8WA5Fz83Aa7OalIDXdYsVFjgdfbYfpHCAUWMTNW1wEVoUIeBQyeRS5RXtquSt G1a9labbGlVpsCMlk1VRy41w/gXLxjUrhx3guo1wPPHkZ4QZJvR1hTyWBfRl51TRos090EadIYkxP hhga2yKXvb+MGnJ/R4dA==; Received: from localhost ([::1] helo=bombadil.infradead.org) by bombadil.infradead.org with esmtp (Exim 4.94.2 #2 (Red Hat Linux)) id 1ovcuH-00D5r4-Ci; Thu, 17 Nov 2022 11:18:09 +0000 Received: from mx3.securetransport.de ([2a01:4f8:c0c:92be::1]) by bombadil.infradead.org with esmtp (Exim 4.94.2 #2 (Red Hat Linux)) id 1ovcuD-00D5mS-2i for linux-arm-kernel@lists.infradead.org; Thu, 17 Nov 2022 11:18:07 +0000 Received: from mail.dh-electronics.com (unknown [77.24.89.57]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by mx3.securetransport.de (Postfix) with ESMTPSA id 104375DC78; Thu, 17 Nov 2022 12:17:43 +0100 (CET) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=dh-electronics.com; s=dhelectronicscom; t=1668683863; bh=J9cZwzQE+zz5MbYAX9m29OHNvL0jHGhjwzt+UWImgWQ=; h=From:To:CC:Subject:Date:In-Reply-To:References:From; b=svxfdq2a5z6WyczBaXNjn7X4S+JXxvs2S30BUMEZXaH+Io6B+y5gbO+bJNRXscd7/ ZKrOXgqUbX7h78GpHPhnC5zMXQVHv9/g7PEZ2KOQqToq1XEECS40hh2lDnyefcewY7 sz7vkamX5qhihrwGCIIPZc/i0g+3Rv2bjKYjO3TuGNHym6JxoJykhYxZfptNnGYFjy eQSBr+nVNcLNJDgra2JoNu/ak6b3QMuj1vDkQfvPEhyDKmL04x2nDaOouJ1B14UfK8 n9EtLQMV66kWUSoK59oTh1ksQToTQvrQWKFTb49rQ3iF9Tv38yPdkBlk0/VA4LCmdl 9h6B2s+JwYqYQ== Received: from DHPWEX01.DH-ELECTRONICS.ORG (10.64.2.30) by DHPWEX01.DH-ELECTRONICS.ORG (10.64.2.30) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384) id 15.2.1118.20; Thu, 17 Nov 2022 11:32:35 +0100 Received: from Stretch-CN.dh-electronics.org (10.64.6.116) by DHPWEX01.DH-ELECTRONICS.ORG (10.64.2.30) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384) id 15.2.1118.20 via Frontend Transport; Thu, 17 Nov 2022 11:32:35 +0100 From: Christoph Niedermaier To: CC: Christoph Niedermaier , Rob Herring , Krzysztof Kozlowski , Peng Fan , Shawn Guo , Marek Vasut , Fabio Estevam , NXP Linux Team , Subject: [PATCH 4/4] ARM: dts: imx6ull-dhcom: Add DHSOM based DRC02 board Date: Thu, 17 Nov 2022 11:31:34 +0100 Message-ID: <20221117103134.6452-5-cniedermaier@dh-electronics.com> X-Mailer: git-send-email 2.11.0 X-klartext: yes In-Reply-To: <20221117103134.6452-1-cniedermaier@dh-electronics.com> References: <20221117103134.6452-1-cniedermaier@dh-electronics.com> MIME-Version: 1.0 X-CRM114-Version: 20100106-BlameMichelson ( TRE 0.8.0 (BSD) ) MR-646709E3 X-CRM114-CacheID: sfid-20221117_031805_468733_8F6E120E X-CRM114-Status: GOOD ( 20.02 ) X-BeenThere: linux-arm-kernel@lists.infradead.org X-Mailman-Version: 2.1.34 Precedence: list List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: "linux-arm-kernel" Errors-To: linux-arm-kernel-bounces+linux-arm-kernel=archiver.kernel.org@lists.infradead.org Add DT for DH DRC02 unit, which is a universal controller device. The system has two ethernet ports, two CANs, RS485 and RS232, USB, capacitive buttons and an OLED display. For this board a DHCOM i.MX6ULL SoM configuration without WiFi/BT is used. The interface is used for the SD card instead. Signed-off-by: Christoph Niedermaier --- Cc: Rob Herring Cc: Krzysztof Kozlowski Cc: Peng Fan Cc: Shawn Guo Cc: Marek Vasut Cc: Fabio Estevam Cc: NXP Linux Team Cc: kernel@dh-electronics.com To: linux-arm-kernel@lists.infradead.org --- arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/imx6ull-dhcom-drc02.dts | 144 ++++++++++++++++++++++++++++++ 2 files changed, 145 insertions(+) create mode 100644 arch/arm/boot/dts/imx6ull-dhcom-drc02.dts diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 9ae8af0c1459..81ecaa32df07 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -739,6 +739,7 @@ dtb-$(CONFIG_SOC_IMX6UL) += \ imx6ull-colibri-wifi-eval-v3.dtb \ imx6ull-colibri-wifi-iris.dtb \ imx6ull-colibri-wifi-iris-v2.dtb \ + imx6ull-dhcom-drc02.dtb \ imx6ull-dhcom-pdk2.dtb \ imx6ull-dhcom-picoitx.dtb \ imx6ull-jozacp.dtb \ diff --git a/arch/arm/boot/dts/imx6ull-dhcom-drc02.dts b/arch/arm/boot/dts/imx6ull-dhcom-drc02.dts new file mode 100644 index 000000000000..268e4de6be7d --- /dev/null +++ b/arch/arm/boot/dts/imx6ull-dhcom-drc02.dts @@ -0,0 +1,144 @@ +// SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause +/* + * Copyright (C) 2022 DH electronics GmbH + * + * DHCOM iMX6ULL variant: + * DHCM-iMX6ULL-C080-R051-F0409-SPI-E2-CAN2-SD-RTC-ADC-I-01D2 + * DHCOR PCB number: 578-200 or newer + * DHCOM PCB number: 579-200 or newer + * DRC02 PCB number: 568-100 or newer (2nd ethernet by internal USB device) + */ +/dts-v1/; + +#include "imx6ull-dhcom-som.dtsi" +#include "imx6ull-dhcom-som-cfg-sdcard.dtsi" + +/ { + model = "DH electronics i.MX6ULL DHCOM on DRC02"; + compatible = "dh,imx6ull-dhcom-drc02", "dh,imx6ull-dhcom-som", + "dh,imx6ull-dhcor-som", "fsl,imx6ull"; +}; + +/* + * The signals for CAN2 TX and RX are routed to the DHCOM UART1 RTS/CTS pins. + * Therefore the UART RTS/CTS must be output on other DHCOM pins, see uart1 + * node below. + */ +&can2 { + status = "okay"; +}; + +&fec1 { + phy-handle = <&mdio1_phy0>; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + mdio1_phy0: ethernet-phy@0 { /* SMSC LAN8710Ai */ + clock-names = "rmii-ref"; + clocks = <&clks IMX6UL_CLK_ENET_REF>; + compatible = "ethernet-phy-id0007.c0f0", + "ethernet-phy-ieee802.3-c22"; + interrupt-parent = <&gpio5>; + interrupts = <5 IRQ_TYPE_LEVEL_LOW>; + pinctrl-0 = <&pinctrl_fec1_phy &pinctrl_snvs_fec1_phy>; + pinctrl-names = "default"; + reg = <0>; + reset-assert-us = <500>; + reset-deassert-us = <500>; + reset-gpios = <&gpio3 23 GPIO_ACTIVE_LOW>; + smsc,disable-energy-detect; /* Make plugin detection reliable */ + }; + }; +}; + +/* Disabled, because 2nd ethernet is provided by an internal USB device */ +&fec2 { + status = "disabled"; +}; + +&gpio1 { + gpio-line-names = + "", "", "", "", + "", "", "", "", + "", "", "", "DRC02-In2", + "", "", "", "", + "", "", "DHCOM-I", "", + "", "", "", "", + "", "", "", "", + "", "", "", ""; +}; + +&gpio4 { + gpio-line-names = + "", "", "", "", + "", "", "", "", + "", "", "", "", + "", "", "", "", + "", "DRC02-HW0", "DRC02-HW1", "DHCOM-M", + "DRC02-HW2", "DHCOM-U", "DHCOM-T", "DHCOM-S", + "DHCOM-R", "DHCOM-Q", "DHCOM-P", "DHCOM-O", + "DHCOM-N", "", "", ""; + /* + * NOTE: On DRC02, the RS485_RX_En is controlled by a separate + * GPIO line, however the i.MX6ULL UART driver assumes RX happens + * during TX anyway and that it only controls drive enable DE + * line. Hence, the RX is always enabled here. + */ + rs485-rx-en-hog { + gpio-hog; + gpios = <25 0>; /* GPIO Q */ + line-name = "rs485-rx-en"; + output-low; + }; +}; + +&gpio5 { + gpio-line-names = + "DHCOM-A", "DHCOM-B", "DHCOM-C", "DRC02-Out2", + "DHCOM-E", "", "", "DRC02-Out1", + "DRC02-In1", "DHCOM-H", "", "", + "", "", "", "", + "", "", "", "", + "", "", "", "", + "", "", "", "", + "", "", "", ""; +}; + +&i2c1 { /* DHCOM I2C2 */ + eeprom@56 { + compatible = "atmel,24c04"; + pagesize = <16>; + reg = <0x56>; + }; +}; + +&uart1 { + /delete-property/ uart-has-rtscts; + rts-gpios = <&gpio1 18 GPIO_ACTIVE_HIGH>; /* GPIO I */ + cts-gpios = <&gpio4 19 GPIO_ACTIVE_HIGH>; /* GPIO M */ +}; + +&uart2 { /* Use UART as RS485 */ + /delete-property/ uart-has-rtscts; + linux,rs485-enabled-at-boot-time; + rts-gpios = <&gpio4 26 GPIO_ACTIVE_HIGH>; /* GPIO P */ +}; + +&iomuxc { + pinctrl_fec1: fec1-grp { + fsl,pins = < + MX6UL_PAD_GPIO1_IO07__ENET1_MDC 0x1b0b0 + MX6UL_PAD_GPIO1_IO06__ENET1_MDIO 0x1b0b0 + MX6UL_PAD_ENET1_RX_EN__ENET1_RX_EN 0x1b0b0 + MX6UL_PAD_ENET1_RX_ER__ENET1_RX_ER 0x1b0b0 + MX6UL_PAD_ENET1_RX_DATA0__ENET1_RDATA00 0x1b0b0 + MX6UL_PAD_ENET1_RX_DATA1__ENET1_RDATA01 0x1b0b0 + MX6UL_PAD_ENET1_TX_EN__ENET1_TX_EN 0x1b010 + MX6UL_PAD_ENET1_TX_DATA0__ENET1_TDATA00 0x1b010 + MX6UL_PAD_ENET1_TX_DATA1__ENET1_TDATA01 0x1b010 + MX6UL_PAD_ENET1_TX_CLK__ENET1_REF_CLK1 0x4001b010 + >; + }; +};