From patchwork Fri Dec 2 08:55:41 2022 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Bartosz Golaszewski X-Patchwork-Id: 13062420 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id A50C2C4167B for ; Fri, 2 Dec 2022 08:56:13 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S232768AbiLBI4J (ORCPT ); Fri, 2 Dec 2022 03:56:09 -0500 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:48124 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S232694AbiLBI4D (ORCPT ); Fri, 2 Dec 2022 03:56:03 -0500 Received: from mail-wr1-x436.google.com (mail-wr1-x436.google.com [IPv6:2a00:1450:4864:20::436]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id C3F3FBE68F for ; Fri, 2 Dec 2022 00:55:59 -0800 (PST) Received: by mail-wr1-x436.google.com with SMTP id h11so6739439wrw.13 for ; Fri, 02 Dec 2022 00:55:59 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=bgdev-pl.20210112.gappssmtp.com; s=20210112; h=content-transfer-encoding:mime-version:references:in-reply-to :message-id:date:subject:cc:to:from:from:to:cc:subject:date :message-id:reply-to; bh=x1c6aXOWkMzrvJWb4ybDXSFS8VHGCMiU8NIu3wtX2eo=; b=694MnBs8EVHYUboDXpYYiI8nEEN7eca2HVwJjKcwng2hc1eDHB5VtphXEA/KVm66e5 9JWhUzz02mQvHH+kys8x2AfvJ0bLtkJ2FAO6skrmfKQiff94tAgD/XmXFhDbPoFJqvN6 DWhwhr5SJ5ZIqH4YDaIs3Eu5qcCAP+EDc0Ck+uD2UX1yeeT4hZx+qBt9/IdUQqke6hx0 pfxr9Jhq/yrOrq4X4pXHC0mtTHcunqxCZcXNE3xJ5R/5/ki4zOnwNPEtiyomyZVo1PJq zUtW6eiuouAdQHZ1iBTQKgQIEDNcIHvOQhDO2KGAiUSEP+8pHrDMTSE3uzcwQf2EeNQ6 75KA== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20210112; h=content-transfer-encoding:mime-version:references:in-reply-to :message-id:date:subject:cc:to:from:x-gm-message-state:from:to:cc :subject:date:message-id:reply-to; bh=x1c6aXOWkMzrvJWb4ybDXSFS8VHGCMiU8NIu3wtX2eo=; b=Qwz+h+o68NQ0pl09EJN8nj76hGVxGbPRN48I3E7ra6tY/d+Fn/xrxXL5ILSQxw0dLz djZ+7hdbn53cJaMsXdkYXVQmUg57TG27o401CVqaQKdNb5ANF5maab3372A5YpjFbSBn e4yDgq3u7reS4HHOdIsRRNzp8vJr34qnmSGWAz8izx5z5qCK3JPiHrdLK/TIy05Qh0y9 zqzlcE6q/UbNqtmJmQDr7ImFKMvC/Nrlyq8dpMDSBPHy6JIumyD1t4ipsB7+GAMTZkxW cWT+5f0B2LIYK5AUY321kTdvjSG3TgshnCLIqiWVjK8bIsJNGYF0hB+4JFTy88MFCTkx 5qiQ== X-Gm-Message-State: ANoB5pnNCoiSVisHSRbYlstq+CrlDyuOOngW0JiWlpfjfl2LsUY1Shz6 ZHrlE28PStqUEUiUf8RPl3YoOA== X-Google-Smtp-Source: AA0mqf68uFv9ga9P20A66J6s/h4kE0KcUl74H+PdN1/QEUrgMX6n5hHxY+6gXFTaqlC/QMDBk5mjDQ== X-Received: by 2002:a5d:6191:0:b0:236:6102:bf3d with SMTP id j17-20020a5d6191000000b002366102bf3dmr42217654wru.705.1669971358337; Fri, 02 Dec 2022 00:55:58 -0800 (PST) Received: from brgl-uxlite.home ([2a01:cb1d:334:ac00:29a4:6f04:ddb1:1ed7]) by smtp.gmail.com with ESMTPSA id a13-20020adfed0d000000b0024219b1cb1bsm6527517wro.60.2022.12.02.00.55.57 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Fri, 02 Dec 2022 00:55:57 -0800 (PST) From: Bartosz Golaszewski To: Andy Gross , Bjorn Andersson , Konrad Dybcio , Greg Kroah-Hartman , Jiri Slaby , Srinivas Kandagatla , Vinod Koul , Alex Elder , =?utf-8?q?Ilp?= =?utf-8?q?o_J=C3=A4rvinen?= Cc: linux-kernel@vger.kernel.org, linux-arm-msm@vger.kernel.org, linux-serial@vger.kernel.org, Bartosz Golaszewski , Konrad Dybcio Subject: [PATCH v5 01/14] tty: serial: qcom-geni-serial: drop unneeded forward definitions Date: Fri, 2 Dec 2022 09:55:41 +0100 Message-Id: <20221202085554.59637-2-brgl@bgdev.pl> X-Mailer: git-send-email 2.37.2 In-Reply-To: <20221202085554.59637-1-brgl@bgdev.pl> References: <20221202085554.59637-1-brgl@bgdev.pl> MIME-Version: 1.0 Precedence: bulk List-ID: X-Mailing-List: linux-arm-msm@vger.kernel.org From: Bartosz Golaszewski If we shuffle the code a bit, we can drop all forward definitions of various static functions. Signed-off-by: Bartosz Golaszewski Reviewed-by: Konrad Dybcio --- drivers/tty/serial/qcom_geni_serial.c | 79 +++++++++++++-------------- 1 file changed, 37 insertions(+), 42 deletions(-) diff --git a/drivers/tty/serial/qcom_geni_serial.c b/drivers/tty/serial/qcom_geni_serial.c index 83b66b73303a..9f2212e7b5ec 100644 --- a/drivers/tty/serial/qcom_geni_serial.c +++ b/drivers/tty/serial/qcom_geni_serial.c @@ -147,11 +147,6 @@ static const struct uart_ops qcom_geni_console_pops; static const struct uart_ops qcom_geni_uart_pops; static struct uart_driver qcom_geni_console_driver; static struct uart_driver qcom_geni_uart_driver; -static int handle_rx_console(struct uart_port *uport, u32 bytes, bool drop); -static int handle_rx_uart(struct uart_port *uport, u32 bytes, bool drop); -static unsigned int qcom_geni_serial_tx_empty(struct uart_port *port); -static void qcom_geni_serial_stop_rx(struct uart_port *uport); -static void qcom_geni_serial_handle_rx(struct uart_port *uport, bool drop); #define to_dev_port(ptr, member) \ container_of(ptr, struct qcom_geni_serial_port, member) @@ -590,6 +585,11 @@ static int handle_rx_uart(struct uart_port *uport, u32 bytes, bool drop) return ret; } +static unsigned int qcom_geni_serial_tx_empty(struct uart_port *uport) +{ + return !readl(uport->membase + SE_GENI_TX_FIFO_STATUS); +} + static void qcom_geni_serial_start_tx(struct uart_port *uport) { u32 irq_en; @@ -635,25 +635,29 @@ static void qcom_geni_serial_stop_tx(struct uart_port *uport) writel(M_CMD_CANCEL_EN, uport->membase + SE_GENI_M_IRQ_CLEAR); } -static void qcom_geni_serial_start_rx(struct uart_port *uport) +static void qcom_geni_serial_handle_rx(struct uart_port *uport, bool drop) { - u32 irq_en; u32 status; + u32 word_cnt; + u32 last_word_byte_cnt; + u32 last_word_partial; + u32 total_bytes; struct qcom_geni_serial_port *port = to_dev_port(uport, uport); - status = readl(uport->membase + SE_GENI_STATUS); - if (status & S_GENI_CMD_ACTIVE) - qcom_geni_serial_stop_rx(uport); - - geni_se_setup_s_cmd(&port->se, UART_START_READ, 0); - - irq_en = readl(uport->membase + SE_GENI_S_IRQ_EN); - irq_en |= S_RX_FIFO_WATERMARK_EN | S_RX_FIFO_LAST_EN; - writel(irq_en, uport->membase + SE_GENI_S_IRQ_EN); + status = readl(uport->membase + SE_GENI_RX_FIFO_STATUS); + word_cnt = status & RX_FIFO_WC_MSK; + last_word_partial = status & RX_LAST; + last_word_byte_cnt = (status & RX_LAST_BYTE_VALID_MSK) >> + RX_LAST_BYTE_VALID_SHFT; - irq_en = readl(uport->membase + SE_GENI_M_IRQ_EN); - irq_en |= M_RX_FIFO_WATERMARK_EN | M_RX_FIFO_LAST_EN; - writel(irq_en, uport->membase + SE_GENI_M_IRQ_EN); + if (!word_cnt) + return; + total_bytes = BYTES_PER_FIFO_WORD * (word_cnt - 1); + if (last_word_partial && last_word_byte_cnt) + total_bytes += last_word_byte_cnt; + else + total_bytes += BYTES_PER_FIFO_WORD; + port->handle_rx(uport, total_bytes, drop); } static void qcom_geni_serial_stop_rx(struct uart_port *uport) @@ -694,29 +698,25 @@ static void qcom_geni_serial_stop_rx(struct uart_port *uport) qcom_geni_serial_abort_rx(uport); } -static void qcom_geni_serial_handle_rx(struct uart_port *uport, bool drop) +static void qcom_geni_serial_start_rx(struct uart_port *uport) { + u32 irq_en; u32 status; - u32 word_cnt; - u32 last_word_byte_cnt; - u32 last_word_partial; - u32 total_bytes; struct qcom_geni_serial_port *port = to_dev_port(uport, uport); - status = readl(uport->membase + SE_GENI_RX_FIFO_STATUS); - word_cnt = status & RX_FIFO_WC_MSK; - last_word_partial = status & RX_LAST; - last_word_byte_cnt = (status & RX_LAST_BYTE_VALID_MSK) >> - RX_LAST_BYTE_VALID_SHFT; + status = readl(uport->membase + SE_GENI_STATUS); + if (status & S_GENI_CMD_ACTIVE) + qcom_geni_serial_stop_rx(uport); - if (!word_cnt) - return; - total_bytes = BYTES_PER_FIFO_WORD * (word_cnt - 1); - if (last_word_partial && last_word_byte_cnt) - total_bytes += last_word_byte_cnt; - else - total_bytes += BYTES_PER_FIFO_WORD; - port->handle_rx(uport, total_bytes, drop); + geni_se_setup_s_cmd(&port->se, UART_START_READ, 0); + + irq_en = readl(uport->membase + SE_GENI_S_IRQ_EN); + irq_en |= S_RX_FIFO_WATERMARK_EN | S_RX_FIFO_LAST_EN; + writel(irq_en, uport->membase + SE_GENI_S_IRQ_EN); + + irq_en = readl(uport->membase + SE_GENI_M_IRQ_EN); + irq_en |= M_RX_FIFO_WATERMARK_EN | M_RX_FIFO_LAST_EN; + writel(irq_en, uport->membase + SE_GENI_M_IRQ_EN); } static void qcom_geni_serial_handle_tx(struct uart_port *uport, bool done, @@ -1122,11 +1122,6 @@ static void qcom_geni_serial_set_termios(struct uart_port *uport, qcom_geni_serial_start_rx(uport); } -static unsigned int qcom_geni_serial_tx_empty(struct uart_port *uport) -{ - return !readl(uport->membase + SE_GENI_TX_FIFO_STATUS); -} - #ifdef CONFIG_SERIAL_QCOM_GENI_CONSOLE static int qcom_geni_console_setup(struct console *co, char *options) { From patchwork Fri Dec 2 08:55:42 2022 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Bartosz Golaszewski X-Patchwork-Id: 13062421 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id E0935C47088 for ; Fri, 2 Dec 2022 08:56:13 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S232696AbiLBI4L (ORCPT ); Fri, 2 Dec 2022 03:56:11 -0500 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:48146 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S232700AbiLBI4E (ORCPT ); Fri, 2 Dec 2022 03:56:04 -0500 Received: from mail-wm1-x329.google.com (mail-wm1-x329.google.com [IPv6:2a00:1450:4864:20::329]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id A50F8BEE33 for ; Fri, 2 Dec 2022 00:56:00 -0800 (PST) Received: by mail-wm1-x329.google.com with SMTP id o7-20020a05600c510700b003cffc0b3374so3754926wms.0 for ; Fri, 02 Dec 2022 00:56:00 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=bgdev-pl.20210112.gappssmtp.com; s=20210112; h=content-transfer-encoding:mime-version:references:in-reply-to :message-id:date:subject:cc:to:from:from:to:cc:subject:date :message-id:reply-to; bh=S89n9QHiQI/y9x3/RBBeD2hc63bXZL5TZ/yxbLwZvtk=; b=WHOc2IwlJtP3msa5dp04MwOfIjoCyqf7msunV1drtI8gwRTxnLzQNGptkHrOMvarHA +bfJ/ZhseK9p5BKodxiYX0/5w9fp5lmwlSimZrs+7JHOAQgAEa46NWAFQue2/Q7iDBj1 oLzFPs5YXemMJCNwb+kafFV4BmzFM7jIclYUXnV9F4PsRpCvlHadsQGC3fVCk6s6zMVL zDYeGK/um5M8SVowqc1jXglRhbZm02r6/X7/raU1iUhI1Pt2ylWZIi+IiPw2oNM8uK7k FqgsaXOAybGN4/F8bbLX7xaC9nfdRzq2ozlZejdmvOoNEdfjBAVF1GDpP/Kok285J1Oc ufTg== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20210112; h=content-transfer-encoding:mime-version:references:in-reply-to :message-id:date:subject:cc:to:from:x-gm-message-state:from:to:cc :subject:date:message-id:reply-to; bh=S89n9QHiQI/y9x3/RBBeD2hc63bXZL5TZ/yxbLwZvtk=; b=d47OOC4v4JbODuMVlZ4+wHNClx1jtUltaRx9UmfBlgQHahu3oBewYKYyo5uinpsMc3 YdDUf+d3pHOyGF82vh3Dfn86Jm4+GLlwJK+etLfgMR2gVelixQ5gAkLaTHuK53dbuS7/ /jUv/lsPsqXxyNglWMsU1kW9PQijCkm2dz7dyPEOmgml/q+1f+vcopGvdqFAwecTLZUr dgxsue4r7j3nHEX1jUAgP7ur4bXtL9N9UdkydnNguknlsZzNg/Hu7W16gzxoz9G43NF1 WVFjl9r/4M72E/TCHKmqbxZn17cdUejxIgw4o9pufT0faqrME0grukgwIQ6wuYeQG96L rrsg== X-Gm-Message-State: ANoB5pk63fGCrE1spKVgR41/NOwsXpkJgQGyAOOBN1DAtfwJe3hyFPMe oYq5iHcmufbj3qpZBWgNWB+vng== X-Google-Smtp-Source: AA0mqf5N5FCu4mjWwOwadlHR5tBz3at09EQJlTZXMxfmxIlfbKbDZ73phiGEqxN4f4jxkwC1+7dQVw== X-Received: by 2002:a1c:f006:0:b0:3cf:7b68:631 with SMTP id a6-20020a1cf006000000b003cf7b680631mr56253232wmb.55.1669971359261; Fri, 02 Dec 2022 00:55:59 -0800 (PST) Received: from brgl-uxlite.home ([2a01:cb1d:334:ac00:29a4:6f04:ddb1:1ed7]) by smtp.gmail.com with ESMTPSA id a13-20020adfed0d000000b0024219b1cb1bsm6527517wro.60.2022.12.02.00.55.58 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Fri, 02 Dec 2022 00:55:58 -0800 (PST) From: Bartosz Golaszewski To: Andy Gross , Bjorn Andersson , Konrad Dybcio , Greg Kroah-Hartman , Jiri Slaby , Srinivas Kandagatla , Vinod Koul , Alex Elder , =?utf-8?q?Ilp?= =?utf-8?q?o_J=C3=A4rvinen?= Cc: linux-kernel@vger.kernel.org, linux-arm-msm@vger.kernel.org, linux-serial@vger.kernel.org, Bartosz Golaszewski , Konrad Dybcio Subject: [PATCH v5 02/14] tty: serial: qcom-geni-serial: remove unused symbols Date: Fri, 2 Dec 2022 09:55:42 +0100 Message-Id: <20221202085554.59637-3-brgl@bgdev.pl> X-Mailer: git-send-email 2.37.2 In-Reply-To: <20221202085554.59637-1-brgl@bgdev.pl> References: <20221202085554.59637-1-brgl@bgdev.pl> MIME-Version: 1.0 Precedence: bulk List-ID: X-Mailing-List: linux-arm-msm@vger.kernel.org From: Bartosz Golaszewski Drop all unused symbols from the driver. Signed-off-by: Bartosz Golaszewski Reviewed-by: Konrad Dybcio --- drivers/tty/serial/qcom_geni_serial.c | 15 --------------- 1 file changed, 15 deletions(-) diff --git a/drivers/tty/serial/qcom_geni_serial.c b/drivers/tty/serial/qcom_geni_serial.c index 9f2212e7b5ec..7af5df6833c7 100644 --- a/drivers/tty/serial/qcom_geni_serial.c +++ b/drivers/tty/serial/qcom_geni_serial.c @@ -42,20 +42,11 @@ #define UART_TX_PAR_EN BIT(0) #define UART_CTS_MASK BIT(1) -/* SE_UART_TX_WORD_LEN */ -#define TX_WORD_LEN_MSK GENMASK(9, 0) - /* SE_UART_TX_STOP_BIT_LEN */ -#define TX_STOP_BIT_LEN_MSK GENMASK(23, 0) #define TX_STOP_BIT_LEN_1 0 -#define TX_STOP_BIT_LEN_1_5 1 #define TX_STOP_BIT_LEN_2 2 -/* SE_UART_TX_TRANS_LEN */ -#define TX_TRANS_LEN_MSK GENMASK(23, 0) - /* SE_UART_RX_TRANS_CFG */ -#define UART_RX_INS_STATUS_BIT BIT(2) #define UART_RX_PAR_EN BIT(3) /* SE_UART_RX_WORD_LEN */ @@ -66,12 +57,9 @@ /* SE_UART_TX_PARITY_CFG/RX_PARITY_CFG */ #define PAR_CALC_EN BIT(0) -#define PAR_MODE_MSK GENMASK(2, 1) -#define PAR_MODE_SHFT 1 #define PAR_EVEN 0x00 #define PAR_ODD 0x01 #define PAR_SPACE 0x10 -#define PAR_MARK 0x11 /* SE_UART_MANUAL_RFR register fields */ #define UART_MANUAL_RFR_EN BIT(31) @@ -80,11 +68,8 @@ /* UART M_CMD OP codes */ #define UART_START_TX 0x1 -#define UART_START_BREAK 0x4 -#define UART_STOP_BREAK 0x5 /* UART S_CMD OP codes */ #define UART_START_READ 0x1 -#define UART_PARAM 0x1 #define UART_OVERSAMPLING 32 #define STALE_TIMEOUT 16 From patchwork Fri Dec 2 08:55:43 2022 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Bartosz Golaszewski X-Patchwork-Id: 13062422 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id 028E5C4708E for ; Fri, 2 Dec 2022 08:56:15 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S232714AbiLBI4N (ORCPT ); Fri, 2 Dec 2022 03:56:13 -0500 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:48176 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S232720AbiLBI4F (ORCPT ); Fri, 2 Dec 2022 03:56:05 -0500 Received: from mail-wm1-x32f.google.com (mail-wm1-x32f.google.com [IPv6:2a00:1450:4864:20::32f]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id A438BBF662 for ; Fri, 2 Dec 2022 00:56:01 -0800 (PST) Received: by mail-wm1-x32f.google.com with SMTP id l39-20020a05600c1d2700b003cf93c8156dso3706669wms.4 for ; Fri, 02 Dec 2022 00:56:01 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=bgdev-pl.20210112.gappssmtp.com; s=20210112; h=content-transfer-encoding:mime-version:references:in-reply-to :message-id:date:subject:cc:to:from:from:to:cc:subject:date :message-id:reply-to; bh=7EJrTQIS5zIHcJVe/CbMMVgFbpImlTtQ6/Fo8uf0cQs=; b=JIqlacfCsCrmPalBO+OWEy2050PGFO4+Z4HoYN3BUUX17PUxngGVj5jQldKkoECl5Q 54u/hQK7mLJb9TFrtlj/QfPaXo4bFtIezelgVJ7TBtJI+/Zqbvb3mcJQ7S5NF9EZ58sl RhGu6zoDpQwCDzXclKQLni7FD0MkCchGRBCCnXcWT/mgJrfwCQKN66xgCfQTsEN7m1CW ZQWmAa4A16X4GG8wAeqcksl2qFVzcrZlmO7c7QHiTntK40Ezz6vUuKA19d7n8ZPnP9B4 Sl2eoq9P4uD4Vvxf9yutqdRHLS1NG9ilfHwtovoQNJ2JmVRK5ytbbSJmk3EhiSfs96K8 6b7w== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20210112; h=content-transfer-encoding:mime-version:references:in-reply-to :message-id:date:subject:cc:to:from:x-gm-message-state:from:to:cc :subject:date:message-id:reply-to; bh=7EJrTQIS5zIHcJVe/CbMMVgFbpImlTtQ6/Fo8uf0cQs=; b=FNhPU2hzPCxcOk2EskNOZXoc1J1GfM4jAHmqong8+kUPxYbo0I2m4kCNWw00hL0Ct9 DEWGPqYNs5OS7e7JvwlZhNsCycC7zPKQU8PEJvJYdH5bPzCmFNkcWC6DcPnoKgEqrJr6 hSgGhk+MJKO/UejM0X9LICbIOO+tPMRMhDDxKMtswqNxRZmJpeuYnSl033a2BnpWpblO 2q48LN6hLD3qSr4BJRsEkgScVzp6cNOGBv0Xxp9SUwHA5qeVxAKsjYI1pIIIEe6M8AZ5 o2fFEjhC6Q6qiKd0JW0f5wqSYvP3x7tDTOmYZN1EArINyqULfpBb3U55g/ffyow+Ib9R 4dYA== X-Gm-Message-State: ANoB5pkPEuXAyIlVtOT9mvRGfe0slluHIVNzWcdemXGFFpG/WsPTIz48 VtVewEuK8ytQn5EqDrLmDoBPbw== X-Google-Smtp-Source: AA0mqf4H7BdOQHxq22fHKrgFGPUb7PNDquCgpqtQ/MMdOum4urukiu96DWWC6by43Pc+TSLm0iM8hw== X-Received: by 2002:a05:600c:4d09:b0:3d0:7e33:9e3f with SMTP id u9-20020a05600c4d0900b003d07e339e3fmr4635685wmp.163.1669971360183; Fri, 02 Dec 2022 00:56:00 -0800 (PST) Received: from brgl-uxlite.home ([2a01:cb1d:334:ac00:29a4:6f04:ddb1:1ed7]) by smtp.gmail.com with ESMTPSA id a13-20020adfed0d000000b0024219b1cb1bsm6527517wro.60.2022.12.02.00.55.59 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Fri, 02 Dec 2022 00:55:59 -0800 (PST) From: Bartosz Golaszewski To: Andy Gross , Bjorn Andersson , Konrad Dybcio , Greg Kroah-Hartman , Jiri Slaby , Srinivas Kandagatla , Vinod Koul , Alex Elder , =?utf-8?q?Ilp?= =?utf-8?q?o_J=C3=A4rvinen?= Cc: linux-kernel@vger.kernel.org, linux-arm-msm@vger.kernel.org, linux-serial@vger.kernel.org, Bartosz Golaszewski , Konrad Dybcio Subject: [PATCH v5 03/14] tty: serial: qcom-geni-serial: align #define values Date: Fri, 2 Dec 2022 09:55:43 +0100 Message-Id: <20221202085554.59637-4-brgl@bgdev.pl> X-Mailer: git-send-email 2.37.2 In-Reply-To: <20221202085554.59637-1-brgl@bgdev.pl> References: <20221202085554.59637-1-brgl@bgdev.pl> MIME-Version: 1.0 Precedence: bulk List-ID: X-Mailing-List: linux-arm-msm@vger.kernel.org From: Bartosz Golaszewski Keep the #define symbols aligned for better readability. Signed-off-by: Bartosz Golaszewski Reviewed-by: Konrad Dybcio --- drivers/tty/serial/qcom_geni_serial.c | 62 +++++++++++++-------------- 1 file changed, 31 insertions(+), 31 deletions(-) diff --git a/drivers/tty/serial/qcom_geni_serial.c b/drivers/tty/serial/qcom_geni_serial.c index 7af5df6833c7..97ee7c074b79 100644 --- a/drivers/tty/serial/qcom_geni_serial.c +++ b/drivers/tty/serial/qcom_geni_serial.c @@ -39,57 +39,57 @@ #define SE_UART_MANUAL_RFR 0x2ac /* SE_UART_TRANS_CFG */ -#define UART_TX_PAR_EN BIT(0) -#define UART_CTS_MASK BIT(1) +#define UART_TX_PAR_EN BIT(0) +#define UART_CTS_MASK BIT(1) /* SE_UART_TX_STOP_BIT_LEN */ -#define TX_STOP_BIT_LEN_1 0 -#define TX_STOP_BIT_LEN_2 2 +#define TX_STOP_BIT_LEN_1 0 +#define TX_STOP_BIT_LEN_2 2 /* SE_UART_RX_TRANS_CFG */ -#define UART_RX_PAR_EN BIT(3) +#define UART_RX_PAR_EN BIT(3) /* SE_UART_RX_WORD_LEN */ -#define RX_WORD_LEN_MASK GENMASK(9, 0) +#define RX_WORD_LEN_MASK GENMASK(9, 0) /* SE_UART_RX_STALE_CNT */ -#define RX_STALE_CNT GENMASK(23, 0) +#define RX_STALE_CNT GENMASK(23, 0) /* SE_UART_TX_PARITY_CFG/RX_PARITY_CFG */ -#define PAR_CALC_EN BIT(0) -#define PAR_EVEN 0x00 -#define PAR_ODD 0x01 -#define PAR_SPACE 0x10 +#define PAR_CALC_EN BIT(0) +#define PAR_EVEN 0x00 +#define PAR_ODD 0x01 +#define PAR_SPACE 0x10 /* SE_UART_MANUAL_RFR register fields */ -#define UART_MANUAL_RFR_EN BIT(31) -#define UART_RFR_NOT_READY BIT(1) -#define UART_RFR_READY BIT(0) +#define UART_MANUAL_RFR_EN BIT(31) +#define UART_RFR_NOT_READY BIT(1) +#define UART_RFR_READY BIT(0) /* UART M_CMD OP codes */ -#define UART_START_TX 0x1 +#define UART_START_TX 0x1 /* UART S_CMD OP codes */ -#define UART_START_READ 0x1 - -#define UART_OVERSAMPLING 32 -#define STALE_TIMEOUT 16 -#define DEFAULT_BITS_PER_CHAR 10 -#define GENI_UART_CONS_PORTS 1 -#define GENI_UART_PORTS 3 -#define DEF_FIFO_DEPTH_WORDS 16 -#define DEF_TX_WM 2 -#define DEF_FIFO_WIDTH_BITS 32 -#define UART_RX_WM 2 +#define UART_START_READ 0x1 + +#define UART_OVERSAMPLING 32 +#define STALE_TIMEOUT 16 +#define DEFAULT_BITS_PER_CHAR 10 +#define GENI_UART_CONS_PORTS 1 +#define GENI_UART_PORTS 3 +#define DEF_FIFO_DEPTH_WORDS 16 +#define DEF_TX_WM 2 +#define DEF_FIFO_WIDTH_BITS 32 +#define UART_RX_WM 2 /* SE_UART_LOOPBACK_CFG */ -#define RX_TX_SORTED BIT(0) -#define CTS_RTS_SORTED BIT(1) -#define RX_TX_CTS_RTS_SORTED (RX_TX_SORTED | CTS_RTS_SORTED) +#define RX_TX_SORTED BIT(0) +#define CTS_RTS_SORTED BIT(1) +#define RX_TX_CTS_RTS_SORTED (RX_TX_SORTED | CTS_RTS_SORTED) /* UART pin swap value */ -#define DEFAULT_IO_MACRO_IO0_IO1_MASK GENMASK(3, 0) +#define DEFAULT_IO_MACRO_IO0_IO1_MASK GENMASK(3, 0) #define IO_MACRO_IO0_SEL 0x3 -#define DEFAULT_IO_MACRO_IO2_IO3_MASK GENMASK(15, 4) +#define DEFAULT_IO_MACRO_IO2_IO3_MASK GENMASK(15, 4) #define IO_MACRO_IO2_IO3_SWAP 0x4640 /* We always configure 4 bytes per FIFO word */ From patchwork Fri Dec 2 08:55:44 2022 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Bartosz Golaszewski X-Patchwork-Id: 13062423 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id 372B7C4332F for ; Fri, 2 Dec 2022 08:56:29 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S232835AbiLBI41 (ORCPT ); Fri, 2 Dec 2022 03:56:27 -0500 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:48188 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S232724AbiLBI4F (ORCPT ); Fri, 2 Dec 2022 03:56:05 -0500 Received: from mail-wr1-x433.google.com (mail-wr1-x433.google.com [IPv6:2a00:1450:4864:20::433]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 85F7EBF672 for ; Fri, 2 Dec 2022 00:56:02 -0800 (PST) Received: by mail-wr1-x433.google.com with SMTP id bx10so6844591wrb.0 for ; Fri, 02 Dec 2022 00:56:02 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=bgdev-pl.20210112.gappssmtp.com; s=20210112; h=content-transfer-encoding:mime-version:references:in-reply-to :message-id:date:subject:cc:to:from:from:to:cc:subject:date :message-id:reply-to; bh=DkZacf9TX3zvyVeUrL+nHxYirMYsPuTeW+Zo+lEbcT0=; b=audPTcU4fkq3Zx83ZmW8f2CeTC8lK8Q6HlKtxI12ZXi95gAUwG1BljzAeGhd+Q4ETq q4uBA2rcMSIgo97vPGQF19/ESkjO5BEdShrXtH44qvHvvbtlY3x29vFrXOwTahFV1R46 /THe6pVVBb53ahlU3Rv9xNDfsetJB21kYbLqB9zM3qixO4VTYAbDAa+L/AMzFQ9skcRc gkIdz74mXiWySIbVljOaZBagfeiB1KOW01S5Ozfsnt7ATOI+13bdr+dKfv82ney+BEuK Pv4zra6b+anW2con6ri1QHTHkkpNnn1SCYkSiiOPZxRkNPAHYhykTTiaA5bbkB6pV7Q3 cc1w== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20210112; h=content-transfer-encoding:mime-version:references:in-reply-to :message-id:date:subject:cc:to:from:x-gm-message-state:from:to:cc :subject:date:message-id:reply-to; bh=DkZacf9TX3zvyVeUrL+nHxYirMYsPuTeW+Zo+lEbcT0=; b=c8YRhp3joXjSziZe919pbQuXK+s5Io4HElujHrlmwvmygW+JJsR8S6h9Tud7WkFldF xldbvgJqcXhn9yXk779vNizbN097kUb12ibJupm6F9Y1eHNrpJTjh253kOBi1MiXfOM+ tnb/KgCSJ/Ho0CasnljAwjPDEdrDBzJeDc9MmC7b8Wij7GHHdOfj2Lw03JK9lXsuF8+9 fjcItPDMwhsTaq3qIe2yuiGf8Hm1xfMXVXOnudf0rVnJqmX6m/AVayItYrgLqQQqs6J6 At2gQZovu9ZpIPw4xeWKuEBmuu7qavJRmOMTMXSwcBbZD6wovFQ6GLAPh8fIUQApVY7g 3XZQ== X-Gm-Message-State: ANoB5pnl+LO72xEOJ530iowqBFYe7UMpwSWjoZ8rbq7PVynfE5yTd3nH P+Hv5LskbA/0pTyi2lTlMal+7g== X-Google-Smtp-Source: AA0mqf68rd7ytSpqr3O/nR2OCv810lyUs6399ZBHc39hqoYlG3CGoZyS/f2KcAaIjNJyqtzVtvt6hw== X-Received: by 2002:adf:e64f:0:b0:241:e2f1:8b44 with SMTP id b15-20020adfe64f000000b00241e2f18b44mr30150395wrn.300.1669971361117; Fri, 02 Dec 2022 00:56:01 -0800 (PST) Received: from brgl-uxlite.home ([2a01:cb1d:334:ac00:29a4:6f04:ddb1:1ed7]) by smtp.gmail.com with ESMTPSA id a13-20020adfed0d000000b0024219b1cb1bsm6527517wro.60.2022.12.02.00.56.00 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Fri, 02 Dec 2022 00:56:00 -0800 (PST) From: Bartosz Golaszewski To: Andy Gross , Bjorn Andersson , Konrad Dybcio , Greg Kroah-Hartman , Jiri Slaby , Srinivas Kandagatla , Vinod Koul , Alex Elder , =?utf-8?q?Ilp?= =?utf-8?q?o_J=C3=A4rvinen?= Cc: linux-kernel@vger.kernel.org, linux-arm-msm@vger.kernel.org, linux-serial@vger.kernel.org, Bartosz Golaszewski , Konrad Dybcio Subject: [PATCH v5 04/14] tty: serial: qcom-geni-serial: improve the to_dev_port() macro Date: Fri, 2 Dec 2022 09:55:44 +0100 Message-Id: <20221202085554.59637-5-brgl@bgdev.pl> X-Mailer: git-send-email 2.37.2 In-Reply-To: <20221202085554.59637-1-brgl@bgdev.pl> References: <20221202085554.59637-1-brgl@bgdev.pl> MIME-Version: 1.0 Precedence: bulk List-ID: X-Mailing-List: linux-arm-msm@vger.kernel.org From: Bartosz Golaszewski The member we want to resolve in struct qcom_geni_serial_port is called uport so we don't need an additional redundant parameter in this macro. While at it: turn the macro into a static inline function. Signed-off-by: Bartosz Golaszewski Reviewed-by: Konrad Dybcio --- drivers/tty/serial/qcom_geni_serial.c | 36 ++++++++++++++------------- 1 file changed, 19 insertions(+), 17 deletions(-) diff --git a/drivers/tty/serial/qcom_geni_serial.c b/drivers/tty/serial/qcom_geni_serial.c index 97ee7c074b79..e4139718e084 100644 --- a/drivers/tty/serial/qcom_geni_serial.c +++ b/drivers/tty/serial/qcom_geni_serial.c @@ -133,8 +133,10 @@ static const struct uart_ops qcom_geni_uart_pops; static struct uart_driver qcom_geni_console_driver; static struct uart_driver qcom_geni_uart_driver; -#define to_dev_port(ptr, member) \ - container_of(ptr, struct qcom_geni_serial_port, member) +static inline struct qcom_geni_serial_port *to_dev_port(struct uart_port *uport) +{ + return container_of(uport, struct qcom_geni_serial_port, uport); +} static struct qcom_geni_serial_port qcom_geni_uart_ports[GENI_UART_PORTS] = { [0] = { @@ -175,7 +177,7 @@ static struct qcom_geni_serial_port qcom_geni_console_port = { static int qcom_geni_serial_request_port(struct uart_port *uport) { struct platform_device *pdev = to_platform_device(uport->dev); - struct qcom_geni_serial_port *port = to_dev_port(uport, uport); + struct qcom_geni_serial_port *port = to_dev_port(uport); uport->membase = devm_platform_ioremap_resource(pdev, 0); if (IS_ERR(uport->membase)) @@ -212,7 +214,7 @@ static void qcom_geni_serial_set_mctrl(struct uart_port *uport, unsigned int mctrl) { u32 uart_manual_rfr = 0; - struct qcom_geni_serial_port *port = to_dev_port(uport, uport); + struct qcom_geni_serial_port *port = to_dev_port(uport); if (uart_console(uport)) return; @@ -253,7 +255,7 @@ static bool qcom_geni_serial_poll_bit(struct uart_port *uport, struct qcom_geni_private_data *private_data = uport->private_data; if (private_data->drv) { - port = to_dev_port(uport, uport); + port = to_dev_port(uport); baud = port->baud; if (!baud) baud = 115200; @@ -506,7 +508,7 @@ static int handle_rx_console(struct uart_port *uport, u32 bytes, bool drop) u32 i; unsigned char buf[sizeof(u32)]; struct tty_port *tport; - struct qcom_geni_serial_port *port = to_dev_port(uport, uport); + struct qcom_geni_serial_port *port = to_dev_port(uport); tport = &uport->state->port; for (i = 0; i < bytes; ) { @@ -549,7 +551,7 @@ static int handle_rx_console(struct uart_port *uport, u32 bytes, bool drop) static int handle_rx_uart(struct uart_port *uport, u32 bytes, bool drop) { struct tty_port *tport; - struct qcom_geni_serial_port *port = to_dev_port(uport, uport); + struct qcom_geni_serial_port *port = to_dev_port(uport); u32 num_bytes_pw = port->tx_fifo_width / BITS_PER_BYTE; u32 words = ALIGN(bytes, num_bytes_pw) / num_bytes_pw; int ret; @@ -598,7 +600,7 @@ static void qcom_geni_serial_stop_tx(struct uart_port *uport) { u32 irq_en; u32 status; - struct qcom_geni_serial_port *port = to_dev_port(uport, uport); + struct qcom_geni_serial_port *port = to_dev_port(uport); irq_en = readl(uport->membase + SE_GENI_M_IRQ_EN); irq_en &= ~(M_CMD_DONE_EN | M_TX_FIFO_WATERMARK_EN); @@ -627,7 +629,7 @@ static void qcom_geni_serial_handle_rx(struct uart_port *uport, bool drop) u32 last_word_byte_cnt; u32 last_word_partial; u32 total_bytes; - struct qcom_geni_serial_port *port = to_dev_port(uport, uport); + struct qcom_geni_serial_port *port = to_dev_port(uport); status = readl(uport->membase + SE_GENI_RX_FIFO_STATUS); word_cnt = status & RX_FIFO_WC_MSK; @@ -649,7 +651,7 @@ static void qcom_geni_serial_stop_rx(struct uart_port *uport) { u32 irq_en; u32 status; - struct qcom_geni_serial_port *port = to_dev_port(uport, uport); + struct qcom_geni_serial_port *port = to_dev_port(uport); u32 s_irq_status; irq_en = readl(uport->membase + SE_GENI_S_IRQ_EN); @@ -687,7 +689,7 @@ static void qcom_geni_serial_start_rx(struct uart_port *uport) { u32 irq_en; u32 status; - struct qcom_geni_serial_port *port = to_dev_port(uport, uport); + struct qcom_geni_serial_port *port = to_dev_port(uport); status = readl(uport->membase + SE_GENI_STATUS); if (status & S_GENI_CMD_ACTIVE) @@ -707,7 +709,7 @@ static void qcom_geni_serial_start_rx(struct uart_port *uport) static void qcom_geni_serial_handle_tx(struct uart_port *uport, bool done, bool active) { - struct qcom_geni_serial_port *port = to_dev_port(uport, uport); + struct qcom_geni_serial_port *port = to_dev_port(uport); struct circ_buf *xmit = &uport->state->xmit; size_t avail; size_t remaining; @@ -803,7 +805,7 @@ static irqreturn_t qcom_geni_serial_isr(int isr, void *dev) struct uart_port *uport = dev; bool drop_rx = false; struct tty_port *tport = &uport->state->port; - struct qcom_geni_serial_port *port = to_dev_port(uport, uport); + struct qcom_geni_serial_port *port = to_dev_port(uport); if (uport->suspended) return IRQ_NONE; @@ -869,7 +871,7 @@ static void qcom_geni_serial_shutdown(struct uart_port *uport) static int qcom_geni_serial_port_setup(struct uart_port *uport) { - struct qcom_geni_serial_port *port = to_dev_port(uport, uport); + struct qcom_geni_serial_port *port = to_dev_port(uport); u32 rxstale = DEFAULT_BITS_PER_CHAR * STALE_TIMEOUT; u32 proto; u32 pin_swap; @@ -917,7 +919,7 @@ static int qcom_geni_serial_port_setup(struct uart_port *uport) static int qcom_geni_serial_startup(struct uart_port *uport) { int ret; - struct qcom_geni_serial_port *port = to_dev_port(uport, uport); + struct qcom_geni_serial_port *port = to_dev_port(uport); if (!port->setup) { ret = qcom_geni_serial_port_setup(uport); @@ -1003,7 +1005,7 @@ static void qcom_geni_serial_set_termios(struct uart_port *uport, u32 stop_bit_len; unsigned int clk_div; u32 ser_clk_cfg; - struct qcom_geni_serial_port *port = to_dev_port(uport, uport); + struct qcom_geni_serial_port *port = to_dev_port(uport); unsigned long clk_rate; u32 ver, sampling_rate; unsigned int avg_bw_core; @@ -1288,7 +1290,7 @@ static struct uart_driver qcom_geni_uart_driver = { static void qcom_geni_serial_pm(struct uart_port *uport, unsigned int new_state, unsigned int old_state) { - struct qcom_geni_serial_port *port = to_dev_port(uport, uport); + struct qcom_geni_serial_port *port = to_dev_port(uport); /* If we've never been called, treat it as off */ if (old_state == UART_PM_STATE_UNDEFINED) From patchwork Fri Dec 2 08:55:45 2022 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Bartosz Golaszewski X-Patchwork-Id: 13062424 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id 2AFA8C4708D for ; Fri, 2 Dec 2022 08:56:31 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S232724AbiLBI43 (ORCPT ); Fri, 2 Dec 2022 03:56:29 -0500 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:48126 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S232681AbiLBI4H (ORCPT ); Fri, 2 Dec 2022 03:56:07 -0500 Received: from mail-wm1-x333.google.com (mail-wm1-x333.google.com [IPv6:2a00:1450:4864:20::333]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 86530BF67C for ; Fri, 2 Dec 2022 00:56:03 -0800 (PST) Received: by mail-wm1-x333.google.com with SMTP id c65-20020a1c3544000000b003cfffd00fc0so5995342wma.1 for ; Fri, 02 Dec 2022 00:56:03 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=bgdev-pl.20210112.gappssmtp.com; s=20210112; h=content-transfer-encoding:mime-version:references:in-reply-to :message-id:date:subject:cc:to:from:from:to:cc:subject:date :message-id:reply-to; bh=EonL2PwB0Makj2JepNmLczYfWSZatIPogqShuTJezMI=; b=oYHsfMhWwfknAvnmTRMSqU/q/3vAa10G9tV9dKVIdu3glvD97Ggh8LCKJcLKJYuMWr 39gIPP5ACetaVmqK9PSTa8JGh9D+rs0sB0vkXxUEbc9JVLIEahNAo1JI4qVkFsO5X4/q ReKJoyZ0NwMRRCxrXAhqHFMufaG/voSwTm5PynZX5x8JWq2c6VHcHyYuMZkcduzzSlAL 4KH+GH5+QtJtKrHh6ho6GoSd3vEX8spxcUM+Xt0GOjiNaNkqWKOCo1G63T/r5Qy8tAw9 JreMs3/y+VWhGRRw7CMAxG8cytxUyBtesK5VP2YdtBEFcXKQK6//F68gV8T8z/24Dx4t NFqg== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20210112; h=content-transfer-encoding:mime-version:references:in-reply-to :message-id:date:subject:cc:to:from:x-gm-message-state:from:to:cc :subject:date:message-id:reply-to; bh=EonL2PwB0Makj2JepNmLczYfWSZatIPogqShuTJezMI=; b=sLVBcPwqiKWn1NQi3RDWBqbLqZzdB2KcfKunTra8yEktaREArSVBqFI42oBeF+Tara HBMcZD20Y5W48DbuNJTFZOQyWLH7Q9uOx2P+RTFvXC5x4la8WJardJolvm53tJ1BUQds In79uiZpj5CuEM7nj+6tl812N78j2eENZvqndqJUFfCixNZULHi0I1e8UgXTYhc5jVuO p9jopIe4jXBYdNVlCaVrIZSln/PcU5U0Azmkwh8hfqpgXzqk79XfZw/A9g5JnjBSADnI zPZ+5Ld7WurvVvuyqotsjpBrIShfqR4UvXKalQD0zMLYvURA82Fd9GK6ajEK9qrrWQwL 4vLg== X-Gm-Message-State: ANoB5plA44FPY+3AQVVYW+2zGgTL1+1+uEFvxlVKUW7LWqj2hyvNLeip l0JizBM9r+Dgi5Ik6xBItzOwDSsphxSpWJb7 X-Google-Smtp-Source: AA0mqf5qrryfLIvfLKURGncF5Wse92/xU0XhkhhVwtxC9tg+138vOjqYQUy19hPNNp9E8SqQgyxAsg== X-Received: by 2002:a05:600c:43d6:b0:3d0:387d:8eb6 with SMTP id f22-20020a05600c43d600b003d0387d8eb6mr31500939wmn.137.1669971362032; Fri, 02 Dec 2022 00:56:02 -0800 (PST) Received: from brgl-uxlite.home ([2a01:cb1d:334:ac00:29a4:6f04:ddb1:1ed7]) by smtp.gmail.com with ESMTPSA id a13-20020adfed0d000000b0024219b1cb1bsm6527517wro.60.2022.12.02.00.56.01 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Fri, 02 Dec 2022 00:56:01 -0800 (PST) From: Bartosz Golaszewski To: Andy Gross , Bjorn Andersson , Konrad Dybcio , Greg Kroah-Hartman , Jiri Slaby , Srinivas Kandagatla , Vinod Koul , Alex Elder , =?utf-8?q?Ilp?= =?utf-8?q?o_J=C3=A4rvinen?= Cc: linux-kernel@vger.kernel.org, linux-arm-msm@vger.kernel.org, linux-serial@vger.kernel.org, Bartosz Golaszewski , Konrad Dybcio Subject: [PATCH v5 05/14] tty: serial: qcom-geni-serial: remove stray newlines Date: Fri, 2 Dec 2022 09:55:45 +0100 Message-Id: <20221202085554.59637-6-brgl@bgdev.pl> X-Mailer: git-send-email 2.37.2 In-Reply-To: <20221202085554.59637-1-brgl@bgdev.pl> References: <20221202085554.59637-1-brgl@bgdev.pl> MIME-Version: 1.0 Precedence: bulk List-ID: X-Mailing-List: linux-arm-msm@vger.kernel.org From: Bartosz Golaszewski Remove stray newlines around #ifdefs for consistency with the rest of the driver code. Signed-off-by: Bartosz Golaszewski Reviewed-by: Konrad Dybcio --- drivers/tty/serial/qcom_geni_serial.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/drivers/tty/serial/qcom_geni_serial.c b/drivers/tty/serial/qcom_geni_serial.c index e4139718e084..ec2523736e99 100644 --- a/drivers/tty/serial/qcom_geni_serial.c +++ b/drivers/tty/serial/qcom_geni_serial.c @@ -320,7 +320,6 @@ static void qcom_geni_serial_abort_rx(struct uart_port *uport) } #ifdef CONFIG_CONSOLE_POLL - static int qcom_geni_serial_get_char(struct uart_port *uport) { struct qcom_geni_private_data *private_data = uport->private_data; @@ -545,7 +544,6 @@ static int handle_rx_console(struct uart_port *uport, u32 bytes, bool drop) { return -EPERM; } - #endif /* CONFIG_SERIAL_QCOM_GENI_CONSOLE */ static int handle_rx_uart(struct uart_port *uport, u32 bytes, bool drop) From patchwork Fri Dec 2 08:55:46 2022 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 8bit X-Patchwork-Submitter: Bartosz Golaszewski X-Patchwork-Id: 13062425 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id DB0F4C4332F for ; Fri, 2 Dec 2022 08:57:04 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S231904AbiLBI5C (ORCPT ); Fri, 2 Dec 2022 03:57:02 -0500 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:48288 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S232745AbiLBI4I (ORCPT ); Fri, 2 Dec 2022 03:56:08 -0500 Received: from mail-wm1-x336.google.com (mail-wm1-x336.google.com [IPv6:2a00:1450:4864:20::336]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id D03EABE4F4 for ; Fri, 2 Dec 2022 00:56:04 -0800 (PST) Received: by mail-wm1-x336.google.com with SMTP id j5-20020a05600c410500b003cfa9c0ea76so3711218wmi.3 for ; Fri, 02 Dec 2022 00:56:04 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=bgdev-pl.20210112.gappssmtp.com; s=20210112; h=content-transfer-encoding:mime-version:references:in-reply-to :message-id:date:subject:cc:to:from:from:to:cc:subject:date :message-id:reply-to; bh=hrodxjE3++JzSf9Q5uxlAVuutjj+cagca/Bct4wXLdY=; b=tIuPN7gVpzhf5tzAOu1OwiGIo8Y2MQmTpARnakTsWoSGJ5neM8dBZrSunMVPCJ7q4C IIHyD0b4thOp5VkFipRYdtXOUrCbI8TYsFNYGL4XhEIBxHTaNwwHkRb94WFirpaLkMwu qHKmGg7Tft980XwnRXwD4wE+IJUHxEqVNRGDemAZRniDFh+j5FNwrLZ39s8vUjNgv/HD 84tTBYV8nhrii+zA7SdX4Crpr5yJMNqLwajxOfVj73JmeEty1JP9ptohSQUleAUU4pM7 m5t/qIA78T3UqJNUSbzIhmu+v0IDgJ45d22b/44mx8Sw6B9xc0zrjMopg1kA6v8VDI1X 3+vw== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20210112; h=content-transfer-encoding:mime-version:references:in-reply-to :message-id:date:subject:cc:to:from:x-gm-message-state:from:to:cc :subject:date:message-id:reply-to; bh=hrodxjE3++JzSf9Q5uxlAVuutjj+cagca/Bct4wXLdY=; b=2DHieZIPhk7vb0mj4fnSXkpStQKV9zZ00WnNGpw/4TKp5eQyJmzYhz/iZ9jlBlGT8a 8U26t18BIG1wfsj4qqVwBCEbFIZR8B60v4YsBoug9ziFoOmfpHedlQ9yW6fr4fS/X9Gy zlCzcrnfuzK+wi99GbDdTTrq7OZU2PYV2ZdNgwq7J6wMOYnEFdq63tHJEM3YTY7H8naD p/6SfEJA38kDm2chaw43czXkttLocD2+OFlLjbOeCH+9OYNOc06Nb2HBculc5ZYDuSKB icUKl7tvr8LtTSaTUcF2slHoqlFiBoMjA+cuLBM0k3Gp+BxqzkPZewUyKWq7GPYpxqxE Or3w== X-Gm-Message-State: ANoB5pnK/Obis7dy4DBHjFr/SYVIAawwSofAAm3zkweDm8A92eg+hDhE K4oifA6h915CTlHIXPAxSyclvw== X-Google-Smtp-Source: AA0mqf61ZY7CS7HBSf5vp8aAXkwToX/vU8MNJwLF/dElJBE+4oQl0yyFZBodseqLwlp/q6Qd2NdIUQ== X-Received: by 2002:a05:600c:1907:b0:3cf:7981:9a7 with SMTP id j7-20020a05600c190700b003cf798109a7mr51178838wmq.87.1669971363351; Fri, 02 Dec 2022 00:56:03 -0800 (PST) Received: from brgl-uxlite.home ([2a01:cb1d:334:ac00:29a4:6f04:ddb1:1ed7]) by smtp.gmail.com with ESMTPSA id a13-20020adfed0d000000b0024219b1cb1bsm6527517wro.60.2022.12.02.00.56.02 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Fri, 02 Dec 2022 00:56:02 -0800 (PST) From: Bartosz Golaszewski To: Andy Gross , Bjorn Andersson , Konrad Dybcio , Greg Kroah-Hartman , Jiri Slaby , Srinivas Kandagatla , Vinod Koul , Alex Elder , =?utf-8?q?Ilp?= =?utf-8?q?o_J=C3=A4rvinen?= Cc: linux-kernel@vger.kernel.org, linux-arm-msm@vger.kernel.org, linux-serial@vger.kernel.org, Bartosz Golaszewski , Konrad Dybcio Subject: [PATCH v5 06/14] tty: serial: qcom-geni-serial: refactor qcom_geni_serial_isr() Date: Fri, 2 Dec 2022 09:55:46 +0100 Message-Id: <20221202085554.59637-7-brgl@bgdev.pl> X-Mailer: git-send-email 2.37.2 In-Reply-To: <20221202085554.59637-1-brgl@bgdev.pl> References: <20221202085554.59637-1-brgl@bgdev.pl> MIME-Version: 1.0 Precedence: bulk List-ID: X-Mailing-List: linux-arm-msm@vger.kernel.org From: Bartosz Golaszewski Simplify the conditions in qcom_geni_serial_isr() and fix indentation. Signed-off-by: Bartosz Golaszewski Reviewed-by: Konrad Dybcio Reviewed-by: Ilpo Järvinen --- drivers/tty/serial/qcom_geni_serial.c | 10 ++++------ 1 file changed, 4 insertions(+), 6 deletions(-) diff --git a/drivers/tty/serial/qcom_geni_serial.c b/drivers/tty/serial/qcom_geni_serial.c index ec2523736e99..fba02f71a874 100644 --- a/drivers/tty/serial/qcom_geni_serial.c +++ b/drivers/tty/serial/qcom_geni_serial.c @@ -827,20 +827,18 @@ static irqreturn_t qcom_geni_serial_isr(int isr, void *dev) if (m_irq_status & m_irq_en & (M_TX_FIFO_WATERMARK_EN | M_CMD_DONE_EN)) qcom_geni_serial_handle_tx(uport, m_irq_status & M_CMD_DONE_EN, - geni_status & M_GENI_CMD_ACTIVE); + geni_status & M_GENI_CMD_ACTIVE); - if (s_irq_status & S_GP_IRQ_0_EN || s_irq_status & S_GP_IRQ_1_EN) { + if (s_irq_status & (S_GP_IRQ_0_EN | S_GP_IRQ_1_EN)) { if (s_irq_status & S_GP_IRQ_0_EN) uport->icount.parity++; drop_rx = true; - } else if (s_irq_status & S_GP_IRQ_2_EN || - s_irq_status & S_GP_IRQ_3_EN) { + } else if (s_irq_status & (S_GP_IRQ_2_EN | S_GP_IRQ_3_EN)) { uport->icount.brk++; port->brk = true; } - if (s_irq_status & S_RX_FIFO_WATERMARK_EN || - s_irq_status & S_RX_FIFO_LAST_EN) + if (s_irq_status & (S_RX_FIFO_WATERMARK_EN | S_RX_FIFO_LAST_EN)) qcom_geni_serial_handle_rx(uport, drop_rx); out_unlock: From patchwork Fri Dec 2 08:55:47 2022 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Bartosz Golaszewski X-Patchwork-Id: 13062426 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id 9C0DAC47088 for ; Fri, 2 Dec 2022 08:57:08 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S232821AbiLBI5G (ORCPT ); Fri, 2 Dec 2022 03:57:06 -0500 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:48086 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S232824AbiLBI41 (ORCPT ); Fri, 2 Dec 2022 03:56:27 -0500 Received: from mail-wr1-x435.google.com (mail-wr1-x435.google.com [IPv6:2a00:1450:4864:20::435]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id E2679C0553 for ; Fri, 2 Dec 2022 00:56:05 -0800 (PST) Received: by mail-wr1-x435.google.com with SMTP id h12so6734674wrv.10 for ; Fri, 02 Dec 2022 00:56:05 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=bgdev-pl.20210112.gappssmtp.com; s=20210112; h=content-transfer-encoding:mime-version:references:in-reply-to :message-id:date:subject:cc:to:from:from:to:cc:subject:date :message-id:reply-to; bh=zbfRkHz4/aW9Ej0X8Fhaj4Le2T1GhSly/B7XfhIOtq0=; b=JktLJu4rVvE9sWZWbk7w7Rz8IZyV0rFZh+goJTP/i2KKdtHMA4S8T1vUcxSTh/5ywY sXpRLYx/VPIcPs14Tz98iyvtpyZC+uV/e8WmlIZe5YkBzcvgCuwzGYh2P6fw4WcfV074 vX4GWxX++bFE5BBxm44+CPuqtXpQGSAg4nrco7uhdkSfUX/yLy0uumrtiZJ6So0E0AWQ bgCMWEQ23qOm1apcuaTjanWDftzLAz827SbpcZ+daBynmQ5P2iXU1EZ7jNkdpjVlT3tX I4sKvXnQiW7/q3SnuUGjfwsuKOlqZkw4yl3O0pBJR3yAcRCWd0spk7xBIx2NGQ2IwjVt OcKQ== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20210112; h=content-transfer-encoding:mime-version:references:in-reply-to :message-id:date:subject:cc:to:from:x-gm-message-state:from:to:cc :subject:date:message-id:reply-to; bh=zbfRkHz4/aW9Ej0X8Fhaj4Le2T1GhSly/B7XfhIOtq0=; b=DraMdkNjoABsHh9/+qaid2/+9e2t3E86iYIkj7UySgCuM877xwWJXMjoGsuHxnn++x SVUnCIAj7jBC8ez2GKdPhOyIE568TurYeBa0oGK0u5/M7UziCb807bXSMFFU0nMbbZxH AinhHFS+0r8jPpdbGe3FvHg9eMb19XK46bZumOU2ZzFegHp6QDDVuXiUV+SrHtzv42u3 sjqY9bHve8WCekU17yzFa96SjmkOZStMmDMfxBim2ZSVIh8+z+Vu2HAEVnWGHscDCucD jko3rAwE8PfUwcH7JXwFtxYqTW7IKffYLSco5clQqc5llP/a/L3Nj/pX2KWSFtpYHxSY XDCw== X-Gm-Message-State: ANoB5pkJCe69VJwPFvdzjfdpyNBfsOu20QhNzZt3LLcjNy83UhCCqhBf lfLW0Qp6YK6Dy074CPjdqymetYi4YQtHg8Db X-Google-Smtp-Source: AA0mqf6W5dJs+6xkkg/KNDhThIeAo4VOfAUHRRveInmom0lnH/BHM1cBfTRQY1FlCMakbSRwzwpicg== X-Received: by 2002:adf:f2d0:0:b0:242:7c:eb9c with SMTP id d16-20020adff2d0000000b00242007ceb9cmr24328148wrp.178.1669971364317; Fri, 02 Dec 2022 00:56:04 -0800 (PST) Received: from brgl-uxlite.home ([2a01:cb1d:334:ac00:29a4:6f04:ddb1:1ed7]) by smtp.gmail.com with ESMTPSA id a13-20020adfed0d000000b0024219b1cb1bsm6527517wro.60.2022.12.02.00.56.03 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Fri, 02 Dec 2022 00:56:03 -0800 (PST) From: Bartosz Golaszewski To: Andy Gross , Bjorn Andersson , Konrad Dybcio , Greg Kroah-Hartman , Jiri Slaby , Srinivas Kandagatla , Vinod Koul , Alex Elder , =?utf-8?q?Ilp?= =?utf-8?q?o_J=C3=A4rvinen?= Cc: linux-kernel@vger.kernel.org, linux-arm-msm@vger.kernel.org, linux-serial@vger.kernel.org, Bartosz Golaszewski , Konrad Dybcio Subject: [PATCH v5 07/14] tty: serial: qcom-geni-serial: remove unneeded tabs Date: Fri, 2 Dec 2022 09:55:47 +0100 Message-Id: <20221202085554.59637-8-brgl@bgdev.pl> X-Mailer: git-send-email 2.37.2 In-Reply-To: <20221202085554.59637-1-brgl@bgdev.pl> References: <20221202085554.59637-1-brgl@bgdev.pl> MIME-Version: 1.0 Precedence: bulk List-ID: X-Mailing-List: linux-arm-msm@vger.kernel.org From: Bartosz Golaszewski Remove redundant indentation in struct member assignment. Signed-off-by: Bartosz Golaszewski Reviewed-by: Konrad Dybcio --- drivers/tty/serial/qcom_geni_serial.c | 24 ++++++++++++------------ 1 file changed, 12 insertions(+), 12 deletions(-) diff --git a/drivers/tty/serial/qcom_geni_serial.c b/drivers/tty/serial/qcom_geni_serial.c index fba02f71a874..68a1402fbe58 100644 --- a/drivers/tty/serial/qcom_geni_serial.c +++ b/drivers/tty/serial/qcom_geni_serial.c @@ -141,26 +141,26 @@ static inline struct qcom_geni_serial_port *to_dev_port(struct uart_port *uport) static struct qcom_geni_serial_port qcom_geni_uart_ports[GENI_UART_PORTS] = { [0] = { .uport = { - .iotype = UPIO_MEM, - .ops = &qcom_geni_uart_pops, - .flags = UPF_BOOT_AUTOCONF, - .line = 0, + .iotype = UPIO_MEM, + .ops = &qcom_geni_uart_pops, + .flags = UPF_BOOT_AUTOCONF, + .line = 0, }, }, [1] = { .uport = { - .iotype = UPIO_MEM, - .ops = &qcom_geni_uart_pops, - .flags = UPF_BOOT_AUTOCONF, - .line = 1, + .iotype = UPIO_MEM, + .ops = &qcom_geni_uart_pops, + .flags = UPF_BOOT_AUTOCONF, + .line = 1, }, }, [2] = { .uport = { - .iotype = UPIO_MEM, - .ops = &qcom_geni_uart_pops, - .flags = UPF_BOOT_AUTOCONF, - .line = 2, + .iotype = UPIO_MEM, + .ops = &qcom_geni_uart_pops, + .flags = UPF_BOOT_AUTOCONF, + .line = 2, }, }, }; From patchwork Fri Dec 2 08:55:48 2022 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Bartosz Golaszewski X-Patchwork-Id: 13062428 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id DB412C4167B for ; Fri, 2 Dec 2022 08:57:18 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S232728AbiLBI5R (ORCPT ); Fri, 2 Dec 2022 03:57:17 -0500 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:48852 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S232852AbiLBI43 (ORCPT ); Fri, 2 Dec 2022 03:56:29 -0500 Received: from mail-wr1-x429.google.com (mail-wr1-x429.google.com [IPv6:2a00:1450:4864:20::429]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 1F06BBEC78 for ; Fri, 2 Dec 2022 00:56:06 -0800 (PST) Received: by mail-wr1-x429.google.com with SMTP id h12so6734716wrv.10 for ; Fri, 02 Dec 2022 00:56:06 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=bgdev-pl.20210112.gappssmtp.com; s=20210112; h=content-transfer-encoding:mime-version:references:in-reply-to :message-id:date:subject:cc:to:from:from:to:cc:subject:date :message-id:reply-to; bh=h9KBlEE4azsWDdEqHoIw3zf1p218z3Yb8Z5E0IDcw8M=; b=SkUvqcIAd73kDG42S6QB6U76WvXAzT/BOgDjn10hVqfNl12MhimRk/M1zOxlQZs477 gqQlU4L+UDnx94Z8r+153WErEZDY6kPYaj8r12w+JSkFdHulDnoOCnFwEru0Hwa6ddlf DazhVeJimLSunp4EVMYe7N48+yRfBdW+4iLi+1O7S8leBwAdYeYLCVJlcgltc11z7Po6 uPBuADvmfidd8+BknjDWreVMz6I1XvpIoTgB5RM9S35qsSNiWJiILmwxTOrTuIqZNEw5 A6Vf7fmE8IiaF+D9pbCEGsM/6yUQIpRycclDsaDRyfLnYiPjhZZ8m98ydP5fmImtNJEV MTPg== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20210112; h=content-transfer-encoding:mime-version:references:in-reply-to :message-id:date:subject:cc:to:from:x-gm-message-state:from:to:cc :subject:date:message-id:reply-to; bh=h9KBlEE4azsWDdEqHoIw3zf1p218z3Yb8Z5E0IDcw8M=; b=UMc2510ty5Nyp8UW8ocdnWN/3YTBSxIh4uDxexyPT5NeTPWcx/3YV0ZZkTMBQaS4x5 5UdObf5IQOrNrSX32UOmpF5eHq4gHHVsGq61THXYb6UVqn4tCAAgjMdDvuPkDMBBDfTh SQHO674cKNbFFvnC1eLKMY2wnnhy5/PjlD+BSoPKbADnKLorUIGat+IyGvRUzUnr20GL 98bco73bsQeORbaxGUIfN9IPzNntxlHd6p6VQ4gpdCu9wu8+eJHBq3T8vLL+JdFeuE9N M43teY1QXtvV4svOeSLtHI/tdffPiDjPDqIw38+a8ODGK9dswhsHbTACiD78fE4ilc5j Vkaw== X-Gm-Message-State: ANoB5pnM5QJoRdBIQhC81nfRupwQ/+xW4nS08DlJsXqaLSnCfGCYMTrB LTR3S1F8l84Lk4ZChCCjBr7t1A== X-Google-Smtp-Source: AA0mqf5b5ms65cPJXa1FoxhdEHJjBXpIj4wTipcyyNx37CsRn0kmBt/StwmPIy2w70s+JS7jPeUPbA== X-Received: by 2002:a5d:4149:0:b0:242:149c:5690 with SMTP id c9-20020a5d4149000000b00242149c5690mr15384879wrq.491.1669971365264; Fri, 02 Dec 2022 00:56:05 -0800 (PST) Received: from brgl-uxlite.home ([2a01:cb1d:334:ac00:29a4:6f04:ddb1:1ed7]) by smtp.gmail.com with ESMTPSA id a13-20020adfed0d000000b0024219b1cb1bsm6527517wro.60.2022.12.02.00.56.04 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Fri, 02 Dec 2022 00:56:04 -0800 (PST) From: Bartosz Golaszewski To: Andy Gross , Bjorn Andersson , Konrad Dybcio , Greg Kroah-Hartman , Jiri Slaby , Srinivas Kandagatla , Vinod Koul , Alex Elder , =?utf-8?q?Ilp?= =?utf-8?q?o_J=C3=A4rvinen?= Cc: linux-kernel@vger.kernel.org, linux-arm-msm@vger.kernel.org, linux-serial@vger.kernel.org, Bartosz Golaszewski Subject: [PATCH v5 08/14] tty: serial: qcom-geni-serial: split out the FIFO tx code Date: Fri, 2 Dec 2022 09:55:48 +0100 Message-Id: <20221202085554.59637-9-brgl@bgdev.pl> X-Mailer: git-send-email 2.37.2 In-Reply-To: <20221202085554.59637-1-brgl@bgdev.pl> References: <20221202085554.59637-1-brgl@bgdev.pl> MIME-Version: 1.0 Precedence: bulk List-ID: X-Mailing-List: linux-arm-msm@vger.kernel.org From: Bartosz Golaszewski qcom_geni_serial_handle_tx() is pretty big, let's move the code that handles the actual writing of data to a separate function which makes sense in preparation for introducing a dma variant of handle_tx(). Signed-off-by: Bartosz Golaszewski --- drivers/tty/serial/qcom_geni_serial.c | 60 +++++++++++++++------------ 1 file changed, 33 insertions(+), 27 deletions(-) diff --git a/drivers/tty/serial/qcom_geni_serial.c b/drivers/tty/serial/qcom_geni_serial.c index 68a1402fbe58..91336d2d20fc 100644 --- a/drivers/tty/serial/qcom_geni_serial.c +++ b/drivers/tty/serial/qcom_geni_serial.c @@ -704,19 +704,48 @@ static void qcom_geni_serial_start_rx(struct uart_port *uport) writel(irq_en, uport->membase + SE_GENI_M_IRQ_EN); } +static int qcom_geni_serial_send_chunk_fifo(struct uart_port *uport, + unsigned int chunk) +{ + struct qcom_geni_serial_port *port = to_dev_port(uport); + struct circ_buf *xmit = &uport->state->xmit; + size_t remaining = chunk; + int i, tail = xmit->tail; + + for (i = 0; i < chunk; ) { + unsigned int tx_bytes; + u8 buf[sizeof(u32)]; + int c; + + memset(buf, 0, sizeof(buf)); + tx_bytes = min_t(size_t, remaining, BYTES_PER_FIFO_WORD); + + for (c = 0; c < tx_bytes ; c++) { + buf[c] = xmit->buf[tail++]; + tail &= UART_XMIT_SIZE - 1; + } + + iowrite32_rep(uport->membase + SE_GENI_TX_FIFOn, buf, 1); + + i += tx_bytes; + uport->icount.tx += tx_bytes; + remaining -= tx_bytes; + port->tx_remaining -= tx_bytes; + } + + return tail; +} + static void qcom_geni_serial_handle_tx(struct uart_port *uport, bool done, bool active) { struct qcom_geni_serial_port *port = to_dev_port(uport); struct circ_buf *xmit = &uport->state->xmit; size_t avail; - size_t remaining; size_t pending; - int i; u32 status; u32 irq_en; unsigned int chunk; - int tail; status = readl(uport->membase + SE_GENI_TX_FIFO_STATUS); @@ -735,7 +764,6 @@ static void qcom_geni_serial_handle_tx(struct uart_port *uport, bool done, avail = port->tx_fifo_depth - (status & TX_FIFO_WC); avail *= BYTES_PER_FIFO_WORD; - tail = xmit->tail; chunk = min(avail, pending); if (!chunk) goto out_write_wakeup; @@ -750,29 +778,7 @@ static void qcom_geni_serial_handle_tx(struct uart_port *uport, bool done, uport->membase + SE_GENI_M_IRQ_EN); } - remaining = chunk; - for (i = 0; i < chunk; ) { - unsigned int tx_bytes; - u8 buf[sizeof(u32)]; - int c; - - memset(buf, 0, sizeof(buf)); - tx_bytes = min_t(size_t, remaining, BYTES_PER_FIFO_WORD); - - for (c = 0; c < tx_bytes ; c++) { - buf[c] = xmit->buf[tail++]; - tail &= UART_XMIT_SIZE - 1; - } - - iowrite32_rep(uport->membase + SE_GENI_TX_FIFOn, buf, 1); - - i += tx_bytes; - uport->icount.tx += tx_bytes; - remaining -= tx_bytes; - port->tx_remaining -= tx_bytes; - } - - xmit->tail = tail; + xmit->tail = qcom_geni_serial_send_chunk_fifo(uport, chunk); /* * The tx fifo watermark is level triggered and latched. Though we had From patchwork Fri Dec 2 08:55:49 2022 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Bartosz Golaszewski X-Patchwork-Id: 13062427 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id 6E3CDC4332F for ; Fri, 2 Dec 2022 08:57:10 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S232341AbiLBI5J (ORCPT ); Fri, 2 Dec 2022 03:57:09 -0500 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:48124 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S232837AbiLBI42 (ORCPT ); Fri, 2 Dec 2022 03:56:28 -0500 Received: from mail-wm1-x32f.google.com (mail-wm1-x32f.google.com [IPv6:2a00:1450:4864:20::32f]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id F3782C056B for ; Fri, 2 Dec 2022 00:56:06 -0800 (PST) Received: by mail-wm1-x32f.google.com with SMTP id l39-20020a05600c1d2700b003cf93c8156dso3706855wms.4 for ; Fri, 02 Dec 2022 00:56:06 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=bgdev-pl.20210112.gappssmtp.com; s=20210112; h=content-transfer-encoding:mime-version:references:in-reply-to :message-id:date:subject:cc:to:from:from:to:cc:subject:date :message-id:reply-to; bh=at8CWDblZ4WCi9Y1OeAGaa4YOdEtlxTYBw/Cs3tSYBA=; b=G2Yb/sc7ahqc+jrJKB8b6M95ZGrp/Xaa0rbBWpp8mdfHoRlyHfxUh3VOTbv705mEry vov4YPUdl8oFiMnlnNC4EHKkNslHxSnc+i7A6bLKDiPMTmN4BDuRl+Dy6ZjlHCwmAa2+ UzNB99ScvlaFoYbiN+vBHEAEVDV6QZeHOhzaDmBUMZyObl24hVZpUd7VQ01iPf2Hl4/a cu5mmcW7KmNAt26cADHwq4l7hwCACO8Hrn/4aEcXTLX60ZU3u1ZoOWOPhhXjl3pndIcr ckMxTv3LyY1E6HTusyZyntp1/Mi/bKlG58D0GGV3vfdI9jlNuTQO5WFIIPHnpPe+zuge xQdg== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20210112; h=content-transfer-encoding:mime-version:references:in-reply-to :message-id:date:subject:cc:to:from:x-gm-message-state:from:to:cc :subject:date:message-id:reply-to; bh=at8CWDblZ4WCi9Y1OeAGaa4YOdEtlxTYBw/Cs3tSYBA=; b=Yfv4u/5VgJBF7mvpl9Fx9itNRi2nGQdSFGXA4dmiqhDnTukYUR3pggzJHGB+GqZIKH 4VgnWqJpjMT+EoH+wt7gGoiwNTv3zUK6V9kNfiuEXwsSq6xWlndfKLemBCB1Egz64lZj dwQJz5fAxIYKZKGebq+1jrXVRTG5jVfSdjeoaKu2bGl7j1qWlW1YsqoE1y8b2Trfvdht vhePn14JYhDdC3Y04fMm+IYR4UCheYuFmaZo7kAgzMwFgdw/c01uowjZqltTUV3eQLsx UaeeMGzLRzRWeZdMhuTC0KoXUx8TfMqTb6cRhggMjCkn1tppapfzT8qQ0dpHxQ6JKNCv Xc+Q== X-Gm-Message-State: ANoB5plGxcJzLDzdXNbKxlP8V1Dsb2fswK7OYJ4m1zBACWkJHiE0GCel sf5p0Kx5noihiS2kFL49oO5Zhw== X-Google-Smtp-Source: AA0mqf5YOHDP3k7FOdOIMbfX/1dFPul0NoVTQaFdE2DpkopDIgrHQ0NzXnU0CpB60zJip6OEqB3JGA== X-Received: by 2002:a05:600c:198a:b0:3b4:8603:e2ae with SMTP id t10-20020a05600c198a00b003b48603e2aemr42014201wmq.148.1669971366174; Fri, 02 Dec 2022 00:56:06 -0800 (PST) Received: from brgl-uxlite.home ([2a01:cb1d:334:ac00:29a4:6f04:ddb1:1ed7]) by smtp.gmail.com with ESMTPSA id a13-20020adfed0d000000b0024219b1cb1bsm6527517wro.60.2022.12.02.00.56.05 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Fri, 02 Dec 2022 00:56:05 -0800 (PST) From: Bartosz Golaszewski To: Andy Gross , Bjorn Andersson , Konrad Dybcio , Greg Kroah-Hartman , Jiri Slaby , Srinivas Kandagatla , Vinod Koul , Alex Elder , =?utf-8?q?Ilp?= =?utf-8?q?o_J=C3=A4rvinen?= Cc: linux-kernel@vger.kernel.org, linux-arm-msm@vger.kernel.org, linux-serial@vger.kernel.org, Bartosz Golaszewski Subject: [PATCH v5 09/14] tty: serial: qcom-geni-serial: refactor qcom_geni_serial_send_chunk_fifo() Date: Fri, 2 Dec 2022 09:55:49 +0100 Message-Id: <20221202085554.59637-10-brgl@bgdev.pl> X-Mailer: git-send-email 2.37.2 In-Reply-To: <20221202085554.59637-1-brgl@bgdev.pl> References: <20221202085554.59637-1-brgl@bgdev.pl> MIME-Version: 1.0 Precedence: bulk List-ID: X-Mailing-List: linux-arm-msm@vger.kernel.org From: Bartosz Golaszewski Shuffle the code a bit, drop unneeded variables, make types of others more consistent and use uart_xmit_advance() instead of handling tail->xmit manually. Signed-off-by: Bartosz Golaszewski --- drivers/tty/serial/qcom_geni_serial.c | 28 ++++++++++----------------- 1 file changed, 10 insertions(+), 18 deletions(-) diff --git a/drivers/tty/serial/qcom_geni_serial.c b/drivers/tty/serial/qcom_geni_serial.c index 91336d2d20fc..40daf58eb1e7 100644 --- a/drivers/tty/serial/qcom_geni_serial.c +++ b/drivers/tty/serial/qcom_geni_serial.c @@ -93,7 +93,7 @@ #define IO_MACRO_IO2_IO3_SWAP 0x4640 /* We always configure 4 bytes per FIFO word */ -#define BYTES_PER_FIFO_WORD 4 +#define BYTES_PER_FIFO_WORD 4U struct qcom_geni_private_data { /* NOTE: earlycon port will have NULL here */ @@ -704,36 +704,28 @@ static void qcom_geni_serial_start_rx(struct uart_port *uport) writel(irq_en, uport->membase + SE_GENI_M_IRQ_EN); } -static int qcom_geni_serial_send_chunk_fifo(struct uart_port *uport, - unsigned int chunk) +static void qcom_geni_serial_send_chunk_fifo(struct uart_port *uport, + unsigned int chunk) { struct qcom_geni_serial_port *port = to_dev_port(uport); struct circ_buf *xmit = &uport->state->xmit; - size_t remaining = chunk; - int i, tail = xmit->tail; - - for (i = 0; i < chunk; ) { - unsigned int tx_bytes; - u8 buf[sizeof(u32)]; - int c; + unsigned int tx_bytes, c, remaining = chunk; + u8 buf[BYTES_PER_FIFO_WORD]; + while (remaining) { memset(buf, 0, sizeof(buf)); - tx_bytes = min_t(size_t, remaining, BYTES_PER_FIFO_WORD); + tx_bytes = min(remaining, BYTES_PER_FIFO_WORD); for (c = 0; c < tx_bytes ; c++) { - buf[c] = xmit->buf[tail++]; - tail &= UART_XMIT_SIZE - 1; + buf[c] = xmit->buf[xmit->tail]; + uart_xmit_advance(uport, 1); } iowrite32_rep(uport->membase + SE_GENI_TX_FIFOn, buf, 1); - i += tx_bytes; - uport->icount.tx += tx_bytes; remaining -= tx_bytes; port->tx_remaining -= tx_bytes; } - - return tail; } static void qcom_geni_serial_handle_tx(struct uart_port *uport, bool done, @@ -778,7 +770,7 @@ static void qcom_geni_serial_handle_tx(struct uart_port *uport, bool done, uport->membase + SE_GENI_M_IRQ_EN); } - xmit->tail = qcom_geni_serial_send_chunk_fifo(uport, chunk); + qcom_geni_serial_send_chunk_fifo(uport, chunk); /* * The tx fifo watermark is level triggered and latched. Though we had From patchwork Fri Dec 2 08:55:50 2022 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Bartosz Golaszewski X-Patchwork-Id: 13062429 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id 8DB59C4332F for ; Fri, 2 Dec 2022 08:57:34 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S233041AbiLBI5c (ORCPT ); Fri, 2 Dec 2022 03:57:32 -0500 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:49472 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S232736AbiLBI4x (ORCPT ); Fri, 2 Dec 2022 03:56:53 -0500 Received: from mail-wr1-x436.google.com (mail-wr1-x436.google.com [IPv6:2a00:1450:4864:20::436]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 8FCB5BF652 for ; Fri, 2 Dec 2022 00:56:08 -0800 (PST) Received: by mail-wr1-x436.google.com with SMTP id u12so5816415wrr.11 for ; Fri, 02 Dec 2022 00:56:08 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=bgdev-pl.20210112.gappssmtp.com; s=20210112; h=content-transfer-encoding:mime-version:references:in-reply-to :message-id:date:subject:cc:to:from:from:to:cc:subject:date :message-id:reply-to; bh=1qH7b7fe8Hb5qheb3lmn+qvXpc5CyEBL9hWh3RvxG08=; b=wXhd4niCBjGs5r0Ayxt/b8cwpV0OG2fC/nCckzvY8jM+sm33VcJKPONwn5yuFJ3bqd y8GbjNGH3oNnwm6HI1S8PX04EZsWQ8clRBcCaAK7W43BRUPVrjfn0/zjdnEQB+dpaswU HE7thOq8HJhpo79FYC78di7vrx15tEm0KxRXJexhgTfNVZsxCIukAQMy+vNE8sNRLIiM nUbp1Ek8uf+DKngCLrrXPLduVCRAtR+Q6csQt/LCCZkUjzQW0HmcpcCXjUj38nipHtq+ RWtMjzQq9/XHzrV9xdftjkGoikdlDLVD2dmEGEo8pB3fEZXxH3dd7h2CcbU9PupAtxEz TEgg== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20210112; h=content-transfer-encoding:mime-version:references:in-reply-to :message-id:date:subject:cc:to:from:x-gm-message-state:from:to:cc :subject:date:message-id:reply-to; bh=1qH7b7fe8Hb5qheb3lmn+qvXpc5CyEBL9hWh3RvxG08=; b=DLTeVFtEyorF5xHUFH5snov49FlYv/36xM38cA2ASPYVnbf8/0L5znhR0EuYXB4ge/ +629VpzRIrebiTqUIUQHWgcFKY2eLlCXTLG53Mb4YLgtnAikmKqwXV07WVUx/+zRBfFK 1aXUxKlTo7MFHFC8MVg6C3pJSrrtfRdi47ywSTg+OdVx2tQADDZP+jzDHILAmYaNR0+h Qip3zQe0/dFy/nOneiRNk0DvOAcEPXmHuSGbpndZya0WPTddFUlBdRCXdl7VHTH3Mtmk EDaN5k9a6scAwTIQXD5VdWvK86kc1j1/L9Tjjty5WRTGvYnAxbsEqe0nLDfkUijnlIFc OBmw== X-Gm-Message-State: ANoB5pmsaot8+wcBtp1CTB7BdNIug2EFM6qREsVGKno0aKDobBY2vCo8 00wI5985Fsq2+KMFKYaFrZ7WgQ== X-Google-Smtp-Source: AA0mqf4Fm3Z/7IMCc8A0/E/F8iXmDDmRENvVNvcb2ouLKhPXWXRTHB3SRXkJcJXsCd0yag4xRqjN4w== X-Received: by 2002:a05:6000:142:b0:242:49d9:9d8f with SMTP id r2-20020a056000014200b0024249d99d8fmr494642wrx.446.1669971367165; Fri, 02 Dec 2022 00:56:07 -0800 (PST) Received: from brgl-uxlite.home ([2a01:cb1d:334:ac00:29a4:6f04:ddb1:1ed7]) by smtp.gmail.com with ESMTPSA id a13-20020adfed0d000000b0024219b1cb1bsm6527517wro.60.2022.12.02.00.56.06 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Fri, 02 Dec 2022 00:56:06 -0800 (PST) From: Bartosz Golaszewski To: Andy Gross , Bjorn Andersson , Konrad Dybcio , Greg Kroah-Hartman , Jiri Slaby , Srinivas Kandagatla , Vinod Koul , Alex Elder , =?utf-8?q?Ilp?= =?utf-8?q?o_J=C3=A4rvinen?= Cc: linux-kernel@vger.kernel.org, linux-arm-msm@vger.kernel.org, linux-serial@vger.kernel.org, Bartosz Golaszewski , Konrad Dybcio Subject: [PATCH v5 10/14] tty: serial: qcom-geni-serial: drop the return value from handle_rx Date: Fri, 2 Dec 2022 09:55:50 +0100 Message-Id: <20221202085554.59637-11-brgl@bgdev.pl> X-Mailer: git-send-email 2.37.2 In-Reply-To: <20221202085554.59637-1-brgl@bgdev.pl> References: <20221202085554.59637-1-brgl@bgdev.pl> MIME-Version: 1.0 Precedence: bulk List-ID: X-Mailing-List: linux-arm-msm@vger.kernel.org From: Bartosz Golaszewski The return value of the handle_rx() callback is never checked. Drop it. Signed-off-by: Bartosz Golaszewski Reviewed-by: Konrad Dybcio --- drivers/tty/serial/qcom_geni_serial.c | 14 ++++++-------- 1 file changed, 6 insertions(+), 8 deletions(-) diff --git a/drivers/tty/serial/qcom_geni_serial.c b/drivers/tty/serial/qcom_geni_serial.c index 40daf58eb1e7..163310107263 100644 --- a/drivers/tty/serial/qcom_geni_serial.c +++ b/drivers/tty/serial/qcom_geni_serial.c @@ -114,7 +114,7 @@ struct qcom_geni_serial_port { u32 tx_fifo_width; u32 rx_fifo_depth; bool setup; - int (*handle_rx)(struct uart_port *uport, u32 bytes, bool drop); + void (*handle_rx)(struct uart_port *uport, u32 bytes, bool drop); unsigned int baud; void *rx_fifo; u32 loopback; @@ -502,7 +502,7 @@ static void qcom_geni_serial_console_write(struct console *co, const char *s, spin_unlock_irqrestore(&uport->lock, flags); } -static int handle_rx_console(struct uart_port *uport, u32 bytes, bool drop) +static void handle_rx_console(struct uart_port *uport, u32 bytes, bool drop) { u32 i; unsigned char buf[sizeof(u32)]; @@ -537,16 +537,15 @@ static int handle_rx_console(struct uart_port *uport, u32 bytes, bool drop) } if (!drop) tty_flip_buffer_push(tport); - return 0; } #else -static int handle_rx_console(struct uart_port *uport, u32 bytes, bool drop) +static void handle_rx_console(struct uart_port *uport, u32 bytes, bool drop) { - return -EPERM; + } #endif /* CONFIG_SERIAL_QCOM_GENI_CONSOLE */ -static int handle_rx_uart(struct uart_port *uport, u32 bytes, bool drop) +static void handle_rx_uart(struct uart_port *uport, u32 bytes, bool drop) { struct tty_port *tport; struct qcom_geni_serial_port *port = to_dev_port(uport); @@ -557,7 +556,7 @@ static int handle_rx_uart(struct uart_port *uport, u32 bytes, bool drop) tport = &uport->state->port; ioread32_rep(uport->membase + SE_GENI_RX_FIFOn, port->rx_fifo, words); if (drop) - return 0; + return; ret = tty_insert_flip_string(tport, port->rx_fifo, bytes); if (ret != bytes) { @@ -567,7 +566,6 @@ static int handle_rx_uart(struct uart_port *uport, u32 bytes, bool drop) } uport->icount.rx += ret; tty_flip_buffer_push(tport); - return ret; } static unsigned int qcom_geni_serial_tx_empty(struct uart_port *uport) From patchwork Fri Dec 2 08:55:51 2022 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Bartosz Golaszewski X-Patchwork-Id: 13062431 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id 0F0C8C4332F for ; Fri, 2 Dec 2022 08:57:42 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S233062AbiLBI5j (ORCPT ); Fri, 2 Dec 2022 03:57:39 -0500 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:48292 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S232898AbiLBI47 (ORCPT ); Fri, 2 Dec 2022 03:56:59 -0500 Received: from mail-wr1-x42e.google.com (mail-wr1-x42e.google.com [IPv6:2a00:1450:4864:20::42e]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id A5602C23C2 for ; Fri, 2 Dec 2022 00:56:09 -0800 (PST) Received: by mail-wr1-x42e.google.com with SMTP id o5so6809353wrm.1 for ; Fri, 02 Dec 2022 00:56:09 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=bgdev-pl.20210112.gappssmtp.com; s=20210112; h=content-transfer-encoding:mime-version:references:in-reply-to :message-id:date:subject:cc:to:from:from:to:cc:subject:date :message-id:reply-to; bh=mhn1qIbRj4GDOEtAy3kSzr1h8b6twAgZO2RVMgsJctk=; b=yKzf1MHBzAN5P6s+EBKAowODbBjQFoGyW2W703PECsmuQvhT6kMLhqINcJPwKUbvig +8F8MABdi6YRzN6kmVWDxwHTf2eJ8Lxg71B48egai0GR5Z1Bwqz1CS3hSCq6tLB8gOHw E4JafwZwpiCxWqK+42Bz1ZHlPuPbjFQM1r/xTcOpEGsaLyhM6ONHypHHaE7d5c7gjq0x kAfvX0/Z97juloazfA+uiWd2yg//irE/LkZA2IZYY6jAhFB9MydTF9j69mtv6rq5ptFJ /40SUAPY5rVM1TDO9Vy7X83Wuh11ZGklLNIBVrb0rIyuMbgex+qz8jVvFQ7jUvOS0787 x1rA== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20210112; h=content-transfer-encoding:mime-version:references:in-reply-to :message-id:date:subject:cc:to:from:x-gm-message-state:from:to:cc :subject:date:message-id:reply-to; bh=mhn1qIbRj4GDOEtAy3kSzr1h8b6twAgZO2RVMgsJctk=; b=NYXRgUeHQuhjnRkScttQ6ktyhxxJbwzSV+rb1pbmNOGbO0/uSdqcctyhEFNRlEPN78 R1+FQCOTgb8dBVH7EVgnGxGJilVIWZSj6ktlv6hv4ue0OvHHRUf6ehpi++41gmjyWmuH O+fAdqq3+rHesYKKAezUQ7UA7UAsjxBmu1+lc05DwhqgY9H0eqArQiFWv54tTQ5xC/EG OlrmcA/kOGzeBvi1MUGmyqDORQEi5RZnHmGJ1SEFabjRHB+KPAP/itso6DpuiMd6H8q2 9LRIpGccIV6GxtI19lhMiyaXu6WxzoKx7urnzOSIZHeorkO7Zr+qNN9nfB6HVa3Y0A0w PreA== X-Gm-Message-State: ANoB5pmWUpnpPFdBY5RC9PwVhEf7c5TxIwlXzUN99mv7F09uGVbBy3PH oNtRDBh00Fk/6xWCVcZ6egBjNA== X-Google-Smtp-Source: AA0mqf69QrR4XyrshFfK0f2eqi7Is+b7ps0bS+2pdbi3+xly2yRVZGBbNKgMRVeeXlTeKqLnmd2skg== X-Received: by 2002:adf:b352:0:b0:242:153c:186e with SMTP id k18-20020adfb352000000b00242153c186emr12961360wrd.289.1669971368040; Fri, 02 Dec 2022 00:56:08 -0800 (PST) Received: from brgl-uxlite.home ([2a01:cb1d:334:ac00:29a4:6f04:ddb1:1ed7]) by smtp.gmail.com with ESMTPSA id a13-20020adfed0d000000b0024219b1cb1bsm6527517wro.60.2022.12.02.00.56.07 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Fri, 02 Dec 2022 00:56:07 -0800 (PST) From: Bartosz Golaszewski To: Andy Gross , Bjorn Andersson , Konrad Dybcio , Greg Kroah-Hartman , Jiri Slaby , Srinivas Kandagatla , Vinod Koul , Alex Elder , =?utf-8?q?Ilp?= =?utf-8?q?o_J=C3=A4rvinen?= Cc: linux-kernel@vger.kernel.org, linux-arm-msm@vger.kernel.org, linux-serial@vger.kernel.org, Bartosz Golaszewski , Konrad Dybcio Subject: [PATCH v5 11/14] tty: serial: qcom-geni-serial: use of_device_id data Date: Fri, 2 Dec 2022 09:55:51 +0100 Message-Id: <20221202085554.59637-12-brgl@bgdev.pl> X-Mailer: git-send-email 2.37.2 In-Reply-To: <20221202085554.59637-1-brgl@bgdev.pl> References: <20221202085554.59637-1-brgl@bgdev.pl> MIME-Version: 1.0 Precedence: bulk List-ID: X-Mailing-List: linux-arm-msm@vger.kernel.org From: Bartosz Golaszewski Instead of checking the device compatible in probe(), assign the device-specific data to struct of_device_id. We'll use it later when providing SE DMA support. Signed-off-by: Bartosz Golaszewski Reviewed-by: Konrad Dybcio --- drivers/tty/serial/qcom_geni_serial.c | 46 ++++++++++++++++++++------- 1 file changed, 34 insertions(+), 12 deletions(-) diff --git a/drivers/tty/serial/qcom_geni_serial.c b/drivers/tty/serial/qcom_geni_serial.c index 163310107263..808b0250d51e 100644 --- a/drivers/tty/serial/qcom_geni_serial.c +++ b/drivers/tty/serial/qcom_geni_serial.c @@ -95,6 +95,11 @@ /* We always configure 4 bytes per FIFO word */ #define BYTES_PER_FIFO_WORD 4U +struct qcom_geni_device_data { + bool console; + void (*handle_rx)(struct uart_port *uport, u32 bytes, bool drop); +}; + struct qcom_geni_private_data { /* NOTE: earlycon port will have NULL here */ struct uart_driver *drv; @@ -114,7 +119,6 @@ struct qcom_geni_serial_port { u32 tx_fifo_width; u32 rx_fifo_depth; bool setup; - void (*handle_rx)(struct uart_port *uport, u32 bytes, bool drop); unsigned int baud; void *rx_fifo; u32 loopback; @@ -126,6 +130,7 @@ struct qcom_geni_serial_port { bool cts_rts_swap; struct qcom_geni_private_data private_data; + const struct qcom_geni_device_data *dev_data; }; static const struct uart_ops qcom_geni_console_pops; @@ -640,7 +645,7 @@ static void qcom_geni_serial_handle_rx(struct uart_port *uport, bool drop) total_bytes += last_word_byte_cnt; else total_bytes += BYTES_PER_FIFO_WORD; - port->handle_rx(uport, total_bytes, drop); + port->dev_data->handle_rx(uport, total_bytes, drop); } static void qcom_geni_serial_stop_rx(struct uart_port *uport) @@ -1343,13 +1348,14 @@ static int qcom_geni_serial_probe(struct platform_device *pdev) struct uart_port *uport; struct resource *res; int irq; - bool console = false; struct uart_driver *drv; + const struct qcom_geni_device_data *data; - if (of_device_is_compatible(pdev->dev.of_node, "qcom,geni-debug-uart")) - console = true; + data = of_device_get_match_data(&pdev->dev); + if (!data) + return -EINVAL; - if (console) { + if (data->console) { drv = &qcom_geni_console_driver; line = of_alias_get_id(pdev->dev.of_node, "serial"); } else { @@ -1359,7 +1365,7 @@ static int qcom_geni_serial_probe(struct platform_device *pdev) line = of_alias_get_id(pdev->dev.of_node, "hsuart"); } - port = get_port_from_line(line, console); + port = get_port_from_line(line, data->console); if (IS_ERR(port)) { dev_err(&pdev->dev, "Invalid line %d\n", line); return PTR_ERR(port); @@ -1371,6 +1377,7 @@ static int qcom_geni_serial_probe(struct platform_device *pdev) return -ENODEV; uport->dev = &pdev->dev; + port->dev_data = data; port->se.dev = &pdev->dev; port->se.wrapper = dev_get_drvdata(pdev->dev.parent); port->se.clk = devm_clk_get(&pdev->dev, "se"); @@ -1389,7 +1396,7 @@ static int qcom_geni_serial_probe(struct platform_device *pdev) port->rx_fifo_depth = DEF_FIFO_DEPTH_WORDS; port->tx_fifo_width = DEF_FIFO_WIDTH_BITS; - if (!console) { + if (!data->console) { port->rx_fifo = devm_kcalloc(uport->dev, port->rx_fifo_depth, sizeof(u32), GFP_KERNEL); if (!port->rx_fifo) @@ -1419,7 +1426,7 @@ static int qcom_geni_serial_probe(struct platform_device *pdev) uport->irq = irq; uport->has_sysrq = IS_ENABLED(CONFIG_SERIAL_QCOM_GENI_CONSOLE); - if (!console) + if (!data->console) port->wakeup_irq = platform_get_irq_optional(pdev, 1); if (of_property_read_bool(pdev->dev.of_node, "rx-tx-swap")) @@ -1441,7 +1448,6 @@ static int qcom_geni_serial_probe(struct platform_device *pdev) port->private_data.drv = drv; uport->private_data = &port->private_data; platform_set_drvdata(pdev, port); - port->handle_rx = console ? handle_rx_console : handle_rx_uart; ret = uart_add_one_port(drv, uport); if (ret) @@ -1521,14 +1527,30 @@ static int __maybe_unused qcom_geni_serial_sys_resume(struct device *dev) return ret; } +static const struct qcom_geni_device_data qcom_geni_console_data = { + .console = true, + .handle_rx = handle_rx_console, +}; + +static const struct qcom_geni_device_data qcom_geni_uart_data = { + .console = false, + .handle_rx = handle_rx_uart, +}; + static const struct dev_pm_ops qcom_geni_serial_pm_ops = { SET_SYSTEM_SLEEP_PM_OPS(qcom_geni_serial_sys_suspend, qcom_geni_serial_sys_resume) }; static const struct of_device_id qcom_geni_serial_match_table[] = { - { .compatible = "qcom,geni-debug-uart", }, - { .compatible = "qcom,geni-uart", }, + { + .compatible = "qcom,geni-debug-uart", + .data = &qcom_geni_console_data, + }, + { + .compatible = "qcom,geni-uart", + .data = &qcom_geni_uart_data, + }, {} }; MODULE_DEVICE_TABLE(of, qcom_geni_serial_match_table); From patchwork Fri Dec 2 08:55:52 2022 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Bartosz Golaszewski X-Patchwork-Id: 13062430 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id 92A93C4332F for ; Fri, 2 Dec 2022 08:57:38 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S233050AbiLBI5g (ORCPT ); Fri, 2 Dec 2022 03:57:36 -0500 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:48288 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S232881AbiLBI47 (ORCPT ); Fri, 2 Dec 2022 03:56:59 -0500 Received: from mail-wr1-x42c.google.com (mail-wr1-x42c.google.com [IPv6:2a00:1450:4864:20::42c]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 8AC19C1BFF for ; Fri, 2 Dec 2022 00:56:09 -0800 (PST) Received: by mail-wr1-x42c.google.com with SMTP id z4so6801940wrr.3 for ; Fri, 02 Dec 2022 00:56:09 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=bgdev-pl.20210112.gappssmtp.com; s=20210112; h=content-transfer-encoding:mime-version:references:in-reply-to :message-id:date:subject:cc:to:from:from:to:cc:subject:date :message-id:reply-to; bh=7Oo6s6EUUJAHLwqnGgZFQJNt6SIn7i9VCkQpm/Vrbzo=; b=kV1V5/gf8m5wqxaEveJyek5uZa0ea5mtXODUbKxzKlTcGhFaB+WjfI13Y0zcfaTHC9 YQeJbqAkcNvWF+yIkB5sJT81q5wAPbAKZfA0JzizaToD+pe8cyVNtumveJef6nqY9AsL Qp9F8dI6KJm+e+UJe5KTHrSkT0GoRNPcqriNW03miil0WG/fqGOTdaR9f7atgurt4el+ xyQsC+CKE2TXOr0M884NB0w809S0tO8hvSK1NOrcmvconJt5H/4UKWiYO2MgEqMQagwy D35/+zHdyZg7J78iORM92uBTWPm0Q6Nw6V/OE0A3KU1G/PC9KPjA2fCIHUHJ08CaxAOh 8Mow== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20210112; h=content-transfer-encoding:mime-version:references:in-reply-to :message-id:date:subject:cc:to:from:x-gm-message-state:from:to:cc :subject:date:message-id:reply-to; bh=7Oo6s6EUUJAHLwqnGgZFQJNt6SIn7i9VCkQpm/Vrbzo=; b=5UbxpPCwbS4PD2cAyt+SQ7ySK4xATTZ7bQGxtZ0q6o74tjbTK/+Iw/SwLya9dPvZIE tADKds1QQOJuEdTFBj7L57eMtWVBadrBFso7vPoOyhlWt2dwbkb+xPyBS+9PrAW4Ou8D 3OqvS0GkURPS7J7tK46divIvnY8cp3DxeoLIUIAYW2OKaR8qaW00SiimRWwuibqD5Cn+ 0Z4nT8VOFeWuaVZrqvIJJHM6mBIYM2Eh3+hLkqhU14i7YbzwqynzxOOl2KTfJpekSxtH wBPH4ba2pAumEAvhi+xHyaXgRHUqaDVCNSlLI/CsvF7bMdWZcfanUWvQVJD5MAe3l5ZP AlXA== X-Gm-Message-State: ANoB5plrkr5SW2fP+U5GI5U+JVFpOrS68v58f82luAkOQfVUFuDFs1Ns zDSTz1Od6oYkkNhpQ6EqqivPBA== X-Google-Smtp-Source: AA0mqf4gv7CkQGJ5xzltg8br8MDWvvzUCeW/vPwG10FoEJPgIhv1Nh1/urLMkOjDJULRmqFKI+23PQ== X-Received: by 2002:a5d:4d51:0:b0:242:1bad:6f79 with SMTP id a17-20020a5d4d51000000b002421bad6f79mr14035680wru.342.1669971369107; Fri, 02 Dec 2022 00:56:09 -0800 (PST) Received: from brgl-uxlite.home ([2a01:cb1d:334:ac00:29a4:6f04:ddb1:1ed7]) by smtp.gmail.com with ESMTPSA id a13-20020adfed0d000000b0024219b1cb1bsm6527517wro.60.2022.12.02.00.56.08 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Fri, 02 Dec 2022 00:56:08 -0800 (PST) From: Bartosz Golaszewski To: Andy Gross , Bjorn Andersson , Konrad Dybcio , Greg Kroah-Hartman , Jiri Slaby , Srinivas Kandagatla , Vinod Koul , Alex Elder , =?utf-8?q?Ilp?= =?utf-8?q?o_J=C3=A4rvinen?= Cc: linux-kernel@vger.kernel.org, linux-arm-msm@vger.kernel.org, linux-serial@vger.kernel.org, Bartosz Golaszewski , Konrad Dybcio Subject: [PATCH v5 12/14] tty: serial: qcom-geni-serial: stop operations in progress at shutdown Date: Fri, 2 Dec 2022 09:55:52 +0100 Message-Id: <20221202085554.59637-13-brgl@bgdev.pl> X-Mailer: git-send-email 2.37.2 In-Reply-To: <20221202085554.59637-1-brgl@bgdev.pl> References: <20221202085554.59637-1-brgl@bgdev.pl> MIME-Version: 1.0 Precedence: bulk List-ID: X-Mailing-List: linux-arm-msm@vger.kernel.org From: Bartosz Golaszewski We don't stop transmissions in progress at shutdown. This is fine with FIFO SE mode but with DMA it causes trouble so fix it now. Signed-off-by: Bartosz Golaszewski Reviewed-by: Konrad Dybcio --- drivers/tty/serial/qcom_geni_serial.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/tty/serial/qcom_geni_serial.c b/drivers/tty/serial/qcom_geni_serial.c index 808b0250d51e..1dfc0122ff53 100644 --- a/drivers/tty/serial/qcom_geni_serial.c +++ b/drivers/tty/serial/qcom_geni_serial.c @@ -864,6 +864,8 @@ static void get_tx_fifo_size(struct qcom_geni_serial_port *port) static void qcom_geni_serial_shutdown(struct uart_port *uport) { disable_irq(uport->irq); + qcom_geni_serial_stop_tx(uport); + qcom_geni_serial_stop_rx(uport); } static int qcom_geni_serial_port_setup(struct uart_port *uport) From patchwork Fri Dec 2 08:55:53 2022 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Bartosz Golaszewski X-Patchwork-Id: 13062432 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id 11FE0C4332F for ; Fri, 2 Dec 2022 08:57:59 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S233079AbiLBI54 (ORCPT ); Fri, 2 Dec 2022 03:57:56 -0500 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:49662 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S232953AbiLBI5B (ORCPT ); Fri, 2 Dec 2022 03:57:01 -0500 Received: from mail-wm1-x32c.google.com (mail-wm1-x32c.google.com [IPv6:2a00:1450:4864:20::32c]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 88F56C35A3 for ; Fri, 2 Dec 2022 00:56:11 -0800 (PST) Received: by mail-wm1-x32c.google.com with SMTP id i81-20020a1c3b54000000b003d070274a61so5530698wma.3 for ; Fri, 02 Dec 2022 00:56:11 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=bgdev-pl.20210112.gappssmtp.com; s=20210112; h=content-transfer-encoding:mime-version:references:in-reply-to :message-id:date:subject:cc:to:from:from:to:cc:subject:date :message-id:reply-to; bh=LuwEN90AtgG+bvIlYhOJ4Y3TdxahsORXGOntfwKDvGM=; b=W2JObHAU3OlA/ReHV0mZlqT9VGsOJBAzjZTf75NChTiLnLAqJJKbKA2+YHv6O3awEJ ypizr5p6eY0pqq5ceMKOm8Xq7oawzZ9tkjXMREbGux7beijwpJC5f/tFavRJDNnoaGbJ TTXPGw9HyLWDTSQeVS+U2tyvnP5iMQ73QTkeN2/kn8xB9KFmqBnKvLoj7umm+wC7gRz8 bYFIvsuLy2+VPgVDzsZM1jPp9AaSRHmc9ENTOE8kIfWJBRaUtBsYej9Skh8jwpVqzmgi iLzwSWMeckbRr3wud6bsYH/iwhFDxJ5X/LLq+UnGcTHGZtJHhYwy6Cpy6/sd0qi1Yhi5 Imtg== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20210112; h=content-transfer-encoding:mime-version:references:in-reply-to :message-id:date:subject:cc:to:from:x-gm-message-state:from:to:cc :subject:date:message-id:reply-to; bh=LuwEN90AtgG+bvIlYhOJ4Y3TdxahsORXGOntfwKDvGM=; b=NQIx43oAHrUumXg50x1A9TlkMRaF3i2vzqHsa0v0lazpbN2XjYj1tSvGyC9WXq6hmc x7uNbVxEYV8JxUQ50ICmuiHTujO1Dc2cjpNj3Of/tGa9XPYeN6po5n6uVukM4UbwEEu6 /5JCy+SN1YQR+DkTWxGacKdlODVD7W+UqS3kBcJAN7tSWDvC4EPG69x68LRuBMDzU/t1 LGCgNhlVEJFcAjYDQiQ7AteueX+6KwMCVxyWQZL8tkjFGfUrzAnTcsyB+G112YpXToar Gmopm+0jm6YOgEF2/fzxcThcvmE56bg0Bwm03cRPtGh9rsln1K60/XbXumIZMVxD794R 5HSw== X-Gm-Message-State: ANoB5pkNk+773K0SJQCvobQ1cvOrOn9ZGaToKYPy6cMH5V/Q/c8Kf/3u r6Ko8x3YDia9egOtJR3Zxdt/Sg== X-Google-Smtp-Source: AA0mqf4qOE8TfJOJSb6Zj6OMKm3aw3+RKHTTawqwv60hwYhonB8hQr5PXPSqp7HaccbeVor2+uX1Eg== X-Received: by 2002:a05:600c:21c6:b0:3c7:19a6:8146 with SMTP id x6-20020a05600c21c600b003c719a68146mr52634302wmj.158.1669971370022; Fri, 02 Dec 2022 00:56:10 -0800 (PST) Received: from brgl-uxlite.home ([2a01:cb1d:334:ac00:29a4:6f04:ddb1:1ed7]) by smtp.gmail.com with ESMTPSA id a13-20020adfed0d000000b0024219b1cb1bsm6527517wro.60.2022.12.02.00.56.09 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Fri, 02 Dec 2022 00:56:09 -0800 (PST) From: Bartosz Golaszewski To: Andy Gross , Bjorn Andersson , Konrad Dybcio , Greg Kroah-Hartman , Jiri Slaby , Srinivas Kandagatla , Vinod Koul , Alex Elder , =?utf-8?q?Ilp?= =?utf-8?q?o_J=C3=A4rvinen?= Cc: linux-kernel@vger.kernel.org, linux-arm-msm@vger.kernel.org, linux-serial@vger.kernel.org, Bartosz Golaszewski , Konrad Dybcio Subject: [PATCH v5 13/14] soc: qcom-geni-se: add more symbol definitions Date: Fri, 2 Dec 2022 09:55:53 +0100 Message-Id: <20221202085554.59637-14-brgl@bgdev.pl> X-Mailer: git-send-email 2.37.2 In-Reply-To: <20221202085554.59637-1-brgl@bgdev.pl> References: <20221202085554.59637-1-brgl@bgdev.pl> MIME-Version: 1.0 Precedence: bulk List-ID: X-Mailing-List: linux-arm-msm@vger.kernel.org From: Bartosz Golaszewski The following symbols will be used when adding support for SE DMA in the qcom geni serial driver. Signed-off-by: Bartosz Golaszewski Reviewed-by: Konrad Dybcio --- include/linux/qcom-geni-se.h | 3 +++ 1 file changed, 3 insertions(+) diff --git a/include/linux/qcom-geni-se.h b/include/linux/qcom-geni-se.h index f5672785c0c4..400213daa461 100644 --- a/include/linux/qcom-geni-se.h +++ b/include/linux/qcom-geni-se.h @@ -103,6 +103,7 @@ struct geni_se { #define SE_DMA_TX_FSM_RST 0xc58 #define SE_DMA_RX_IRQ_STAT 0xd40 #define SE_DMA_RX_IRQ_CLR 0xd44 +#define SE_DMA_RX_LEN_IN 0xd54 #define SE_DMA_RX_FSM_RST 0xd58 #define SE_HW_PARAM_0 0xe24 #define SE_HW_PARAM_1 0xe28 @@ -235,6 +236,8 @@ struct geni_se { #define RX_SBE BIT(2) #define RX_RESET_DONE BIT(3) #define RX_FLUSH_DONE BIT(4) +#define RX_DMA_PARITY_ERR BIT(5) +#define RX_DMA_BREAK GENMASK(8, 7) #define RX_GENI_GP_IRQ GENMASK(10, 5) #define RX_GENI_CANCEL_IRQ BIT(11) #define RX_GENI_GP_IRQ_EXT GENMASK(13, 12) From patchwork Fri Dec 2 08:55:54 2022 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Bartosz Golaszewski X-Patchwork-Id: 13062433 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id 75D6DC4332F for ; Fri, 2 Dec 2022 08:58:14 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S232977AbiLBI6M (ORCPT ); Fri, 2 Dec 2022 03:58:12 -0500 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:49690 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S232554AbiLBI5D (ORCPT ); Fri, 2 Dec 2022 03:57:03 -0500 Received: from mail-wm1-x32d.google.com (mail-wm1-x32d.google.com [IPv6:2a00:1450:4864:20::32d]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 90C44C35B1 for ; Fri, 2 Dec 2022 00:56:12 -0800 (PST) Received: by mail-wm1-x32d.google.com with SMTP id ja4-20020a05600c556400b003cf6e77f89cso4509258wmb.0 for ; Fri, 02 Dec 2022 00:56:12 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=bgdev-pl.20210112.gappssmtp.com; s=20210112; h=content-transfer-encoding:mime-version:references:in-reply-to :message-id:date:subject:cc:to:from:from:to:cc:subject:date :message-id:reply-to; bh=WPw7thSrS45qstEiKKG7LVim3F0rg+3QPQJZbEs5Dw4=; b=WWABFII3QiJ/N2Kv/xJ+xcBmLMdturc/QLeQjJ91CokGxBtwWzlPfoemd7BkMRcFtm wojzemA1OL4NzwQ6RY1GboVRhkL/5uS6a8n1XyfT1nOwQeQ5E/AMvI75nkBJv0Mv4j3U b53Tbu2IO8Ixn6HaUHOlKDzmbOK9VAomf7kvYjMwvK76zlCjVcvke4U3qLQ0o4nW//SM sgaOu/yeJK6b4Rqj5/NljaHHXMg7DzcPVzFDK+VnyNeYzYidxkh2LGEnl54FSmYff+7V 2CQXmRe8q/sFNte95y7AG8GrCRA23QxquQHh1ALIxanOv01U53b4AUXu2/lQX6B4mCMz lhDw== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20210112; h=content-transfer-encoding:mime-version:references:in-reply-to :message-id:date:subject:cc:to:from:x-gm-message-state:from:to:cc :subject:date:message-id:reply-to; bh=WPw7thSrS45qstEiKKG7LVim3F0rg+3QPQJZbEs5Dw4=; b=rcgyj3UxOW3rv4+XVsRFfvQaWqIXY2NgoZq96FePG6EXYxPoNYAIXGLZVVhMKQiy6z sDCwSWf4idRXtt5T+rx1lae5sZXkj1k3dXe7tlxhaIhzinW8vYKyEVwm8lQzNyCJDZi1 jIMaVBnhPU4jgUyGign9JdUO2FQWYHt2ak2UAqO9exNcf8U6Sv2PXPRiIaAsD9ZRIc+6 dNC5cxYXeqqxBFgQlwnlVyPG/FuQmvs7K2Vv39TnaArmOHFXZdaVI+fkIDOiRDpKTgdm AYw2HSt/vP1SdWscSsBapB9C41cxmHj5EoZ/AD/gBV9x3bWFdfSDRQq2Hf6HbBfFX/H0 kiHw== X-Gm-Message-State: ANoB5pkUKkY6JuujkqgJWLhgumGscK05kgoW9Yo191xqYr1G4LC6e57L DvV4Mzn4BW1Yv8Hct/Buez6UWQ== X-Google-Smtp-Source: AA0mqf7qfpTwSUAYSnf+dzDLBPZs3xT7UCBeMPRdcQDeEklfajew/NMruNlI5FWjGYoTCvWDrwI8uA== X-Received: by 2002:a05:600c:468c:b0:3cf:7c81:caae with SMTP id p12-20020a05600c468c00b003cf7c81caaemr45745603wmo.135.1669971370962; Fri, 02 Dec 2022 00:56:10 -0800 (PST) Received: from brgl-uxlite.home ([2a01:cb1d:334:ac00:29a4:6f04:ddb1:1ed7]) by smtp.gmail.com with ESMTPSA id a13-20020adfed0d000000b0024219b1cb1bsm6527517wro.60.2022.12.02.00.56.10 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Fri, 02 Dec 2022 00:56:10 -0800 (PST) From: Bartosz Golaszewski To: Andy Gross , Bjorn Andersson , Konrad Dybcio , Greg Kroah-Hartman , Jiri Slaby , Srinivas Kandagatla , Vinod Koul , Alex Elder , =?utf-8?q?Ilp?= =?utf-8?q?o_J=C3=A4rvinen?= Cc: linux-kernel@vger.kernel.org, linux-arm-msm@vger.kernel.org, linux-serial@vger.kernel.org, Bartosz Golaszewski Subject: [PATCH v5 14/14] tty: serial: qcom-geni-serial: add support for serial engine DMA Date: Fri, 2 Dec 2022 09:55:54 +0100 Message-Id: <20221202085554.59637-15-brgl@bgdev.pl> X-Mailer: git-send-email 2.37.2 In-Reply-To: <20221202085554.59637-1-brgl@bgdev.pl> References: <20221202085554.59637-1-brgl@bgdev.pl> MIME-Version: 1.0 Precedence: bulk List-ID: X-Mailing-List: linux-arm-msm@vger.kernel.org From: Bartosz Golaszewski The qcom-geni-serial driver currently only works in SE FIFO mode. This limits the UART speed to around 180 kB/s. In order to achieve higher speeds we need to use SE DMA mode. Keep the console port working in FIFO mode but extend the code to use DMA for the high-speed port. Signed-off-by: Bartosz Golaszewski --- drivers/tty/serial/qcom_geni_serial.c | 314 +++++++++++++++++++++----- 1 file changed, 255 insertions(+), 59 deletions(-) diff --git a/drivers/tty/serial/qcom_geni_serial.c b/drivers/tty/serial/qcom_geni_serial.c index 1dfc0122ff53..85c8771ae318 100644 --- a/drivers/tty/serial/qcom_geni_serial.c +++ b/drivers/tty/serial/qcom_geni_serial.c @@ -70,6 +70,8 @@ #define UART_START_TX 0x1 /* UART S_CMD OP codes */ #define UART_START_READ 0x1 +#define UART_PARAM 0x1 +#define UART_PARAM_RFR_OPEN BIT(7) #define UART_OVERSAMPLING 32 #define STALE_TIMEOUT 16 @@ -95,9 +97,11 @@ /* We always configure 4 bytes per FIFO word */ #define BYTES_PER_FIFO_WORD 4U +#define DMA_RX_BUF_SIZE 2048 + struct qcom_geni_device_data { bool console; - void (*handle_rx)(struct uart_port *uport, u32 bytes, bool drop); + enum geni_se_xfer_mode mode; }; struct qcom_geni_private_data { @@ -118,9 +122,11 @@ struct qcom_geni_serial_port { u32 tx_fifo_depth; u32 tx_fifo_width; u32 rx_fifo_depth; + dma_addr_t tx_dma_addr; + dma_addr_t rx_dma_addr; bool setup; unsigned int baud; - void *rx_fifo; + void *rx_buf; u32 loopback; bool brk; @@ -249,6 +255,16 @@ static struct qcom_geni_serial_port *get_port_from_line(int line, bool console) return port; } +static bool qcom_geni_serial_main_active(struct uart_port *uport) +{ + return readl(uport->membase + SE_GENI_STATUS) & M_GENI_CMD_ACTIVE; +} + +static bool qcom_geni_serial_secondary_active(struct uart_port *uport) +{ + return readl(uport->membase + SE_GENI_STATUS) & S_GENI_CMD_ACTIVE; +} + static bool qcom_geni_serial_poll_bit(struct uart_port *uport, int offset, int field, bool set) { @@ -552,18 +568,11 @@ static void handle_rx_console(struct uart_port *uport, u32 bytes, bool drop) static void handle_rx_uart(struct uart_port *uport, u32 bytes, bool drop) { - struct tty_port *tport; struct qcom_geni_serial_port *port = to_dev_port(uport); - u32 num_bytes_pw = port->tx_fifo_width / BITS_PER_BYTE; - u32 words = ALIGN(bytes, num_bytes_pw) / num_bytes_pw; + struct tty_port *tport = &uport->state->port; int ret; - tport = &uport->state->port; - ioread32_rep(uport->membase + SE_GENI_RX_FIFOn, port->rx_fifo, words); - if (drop) - return; - - ret = tty_insert_flip_string(tport, port->rx_fifo, bytes); + ret = tty_insert_flip_string(tport, port->rx_buf, bytes); if (ret != bytes) { dev_err(uport->dev, "%s:Unable to push data ret %d_bytes %d\n", __func__, ret, bytes); @@ -578,16 +587,75 @@ static unsigned int qcom_geni_serial_tx_empty(struct uart_port *uport) return !readl(uport->membase + SE_GENI_TX_FIFO_STATUS); } -static void qcom_geni_serial_start_tx(struct uart_port *uport) +static void qcom_geni_serial_stop_tx_dma(struct uart_port *uport) { - u32 irq_en; - u32 status; + struct qcom_geni_serial_port *port = to_dev_port(uport); + bool done; + u32 m_irq_en; + + if (!qcom_geni_serial_main_active(uport)) + return; + + if (port->rx_dma_addr) { + geni_se_tx_dma_unprep(&port->se, port->tx_dma_addr, + port->tx_remaining); + port->tx_dma_addr = 0; + port->tx_remaining = 0; + } + + m_irq_en = readl(uport->membase + SE_GENI_M_IRQ_EN); + writel(m_irq_en, uport->membase + SE_GENI_M_IRQ_EN); + geni_se_cancel_m_cmd(&port->se); + + done = qcom_geni_serial_poll_bit(uport, SE_GENI_S_IRQ_STATUS, + S_CMD_CANCEL_EN, true); + if (!done) { + geni_se_abort_m_cmd(&port->se); + done = qcom_geni_serial_poll_bit(uport, SE_GENI_M_IRQ_STATUS, + M_CMD_ABORT_EN, true); + if (!done) + dev_err_ratelimited(uport->dev, "M_CMD_ABORT_EN not set"); + writel(M_CMD_ABORT_EN, uport->membase + SE_GENI_M_IRQ_CLEAR); + } + + writel(M_CMD_CANCEL_EN, uport->membase + SE_GENI_M_IRQ_CLEAR); +} + +static void qcom_geni_serial_start_tx_dma(struct uart_port *uport) +{ + struct qcom_geni_serial_port *port = to_dev_port(uport); + struct circ_buf *xmit = &uport->state->xmit; + unsigned int xmit_size; + int ret; + + if (port->tx_dma_addr) + return; + + xmit_size = uart_circ_chars_pending(xmit); + if (xmit_size < WAKEUP_CHARS) + uart_write_wakeup(uport); - status = readl(uport->membase + SE_GENI_STATUS); - if (status & M_GENI_CMD_ACTIVE) + xmit_size = CIRC_CNT_TO_END(xmit->head, xmit->tail, UART_XMIT_SIZE); + + qcom_geni_serial_setup_tx(uport, xmit_size); + + ret = geni_se_tx_dma_prep(&port->se, &xmit->buf[xmit->tail], + xmit_size, &port->tx_dma_addr); + if (ret) { + dev_err(uport->dev, "unable to start TX SE DMA: %d\n", ret); + qcom_geni_serial_stop_tx_dma(uport); return; + } + + port->tx_remaining = xmit_size; +} + +static void qcom_geni_serial_start_tx_fifo(struct uart_port *uport) +{ + u32 irq_en; - if (!qcom_geni_serial_tx_empty(uport)) + if (qcom_geni_serial_main_active(uport) || + !qcom_geni_serial_tx_empty(uport)) return; irq_en = readl(uport->membase + SE_GENI_M_IRQ_EN); @@ -597,19 +665,17 @@ static void qcom_geni_serial_start_tx(struct uart_port *uport) writel(irq_en, uport->membase + SE_GENI_M_IRQ_EN); } -static void qcom_geni_serial_stop_tx(struct uart_port *uport) +static void qcom_geni_serial_stop_tx_fifo(struct uart_port *uport) { u32 irq_en; - u32 status; struct qcom_geni_serial_port *port = to_dev_port(uport); irq_en = readl(uport->membase + SE_GENI_M_IRQ_EN); irq_en &= ~(M_CMD_DONE_EN | M_TX_FIFO_WATERMARK_EN); writel(0, uport->membase + SE_GENI_TX_WATERMARK_REG); writel(irq_en, uport->membase + SE_GENI_M_IRQ_EN); - status = readl(uport->membase + SE_GENI_STATUS); /* Possible stop tx is called multiple times. */ - if (!(status & M_GENI_CMD_ACTIVE)) + if (!qcom_geni_serial_main_active(uport)) return; geni_se_cancel_m_cmd(&port->se); @@ -623,14 +689,13 @@ static void qcom_geni_serial_stop_tx(struct uart_port *uport) writel(M_CMD_CANCEL_EN, uport->membase + SE_GENI_M_IRQ_CLEAR); } -static void qcom_geni_serial_handle_rx(struct uart_port *uport, bool drop) +static void qcom_geni_serial_handle_rx_fifo(struct uart_port *uport, bool drop) { u32 status; u32 word_cnt; u32 last_word_byte_cnt; u32 last_word_partial; u32 total_bytes; - struct qcom_geni_serial_port *port = to_dev_port(uport); status = readl(uport->membase + SE_GENI_RX_FIFO_STATUS); word_cnt = status & RX_FIFO_WC_MSK; @@ -645,13 +710,12 @@ static void qcom_geni_serial_handle_rx(struct uart_port *uport, bool drop) total_bytes += last_word_byte_cnt; else total_bytes += BYTES_PER_FIFO_WORD; - port->dev_data->handle_rx(uport, total_bytes, drop); + handle_rx_console(uport, total_bytes, drop); } -static void qcom_geni_serial_stop_rx(struct uart_port *uport) +static void qcom_geni_serial_stop_rx_fifo(struct uart_port *uport) { u32 irq_en; - u32 status; struct qcom_geni_serial_port *port = to_dev_port(uport); u32 s_irq_status; @@ -663,9 +727,7 @@ static void qcom_geni_serial_stop_rx(struct uart_port *uport) irq_en &= ~(M_RX_FIFO_WATERMARK_EN | M_RX_FIFO_LAST_EN); writel(irq_en, uport->membase + SE_GENI_M_IRQ_EN); - status = readl(uport->membase + SE_GENI_STATUS); - /* Possible stop rx is called multiple times. */ - if (!(status & S_GENI_CMD_ACTIVE)) + if (!qcom_geni_serial_secondary_active(uport)) return; geni_se_cancel_s_cmd(&port->se); @@ -678,23 +740,20 @@ static void qcom_geni_serial_stop_rx(struct uart_port *uport) s_irq_status = readl(uport->membase + SE_GENI_S_IRQ_STATUS); /* Flush the Rx buffer */ if (s_irq_status & S_RX_FIFO_LAST_EN) - qcom_geni_serial_handle_rx(uport, true); + qcom_geni_serial_handle_rx_fifo(uport, true); writel(s_irq_status, uport->membase + SE_GENI_S_IRQ_CLEAR); - status = readl(uport->membase + SE_GENI_STATUS); - if (status & S_GENI_CMD_ACTIVE) + if (qcom_geni_serial_secondary_active(uport)) qcom_geni_serial_abort_rx(uport); } -static void qcom_geni_serial_start_rx(struct uart_port *uport) +static void qcom_geni_serial_start_rx_fifo(struct uart_port *uport) { u32 irq_en; - u32 status; struct qcom_geni_serial_port *port = to_dev_port(uport); - status = readl(uport->membase + SE_GENI_STATUS); - if (status & S_GENI_CMD_ACTIVE) - qcom_geni_serial_stop_rx(uport); + if (qcom_geni_serial_secondary_active(uport)) + qcom_geni_serial_stop_rx_fifo(uport); geni_se_setup_s_cmd(&port->se, UART_START_READ, 0); @@ -707,6 +766,94 @@ static void qcom_geni_serial_start_rx(struct uart_port *uport) writel(irq_en, uport->membase + SE_GENI_M_IRQ_EN); } +static void qcom_geni_serial_stop_rx_dma(struct uart_port *uport) +{ + struct qcom_geni_serial_port *port = to_dev_port(uport); + + if (!qcom_geni_serial_secondary_active(uport)) + return; + + geni_se_cancel_s_cmd(&port->se); + qcom_geni_serial_poll_bit(uport, SE_GENI_S_IRQ_STATUS, + S_CMD_CANCEL_EN, true); + + if (qcom_geni_serial_secondary_active(uport)) + qcom_geni_serial_abort_rx(uport); + + if (port->rx_dma_addr) { + geni_se_rx_dma_unprep(&port->se, port->rx_dma_addr, + DMA_RX_BUF_SIZE); + port->rx_dma_addr = 0; + } +} + +static void qcom_geni_serial_start_rx_dma(struct uart_port *uport) +{ + struct qcom_geni_serial_port *port = to_dev_port(uport); + int ret; + + if (qcom_geni_serial_secondary_active(uport)) + qcom_geni_serial_stop_rx_dma(uport); + + geni_se_setup_s_cmd(&port->se, UART_START_READ, UART_PARAM_RFR_OPEN); + + ret = geni_se_rx_dma_prep(&port->se, port->rx_buf, + DMA_RX_BUF_SIZE, + &port->rx_dma_addr); + if (ret) { + dev_err(uport->dev, "unable to start RX SE DMA: %d\n", ret); + qcom_geni_serial_stop_rx_dma(uport); + } +} + +static void qcom_geni_serial_handle_rx_dma(struct uart_port *uport, bool drop) +{ + struct qcom_geni_serial_port *port = to_dev_port(uport); + u32 rx_in; + int ret; + + if (!qcom_geni_serial_secondary_active(uport)) + return; + + if (!port->rx_dma_addr) + return; + + geni_se_rx_dma_unprep(&port->se, port->rx_dma_addr, DMA_RX_BUF_SIZE); + port->rx_dma_addr = 0; + + rx_in = readl(uport->membase + SE_DMA_RX_LEN_IN); + if (!rx_in) { + dev_warn(uport->dev, "serial engine reports 0 RX bytes in!\n"); + return; + } + + if (!drop) + handle_rx_uart(uport, rx_in, drop); + + ret = geni_se_rx_dma_prep(&port->se, port->rx_buf, + DMA_RX_BUF_SIZE, + &port->rx_dma_addr); + if (ret) { + dev_err(uport->dev, "unable to start RX SE DMA: %d\n", ret); + qcom_geni_serial_stop_rx_dma(uport); + } +} + +static void qcom_geni_serial_start_rx(struct uart_port *uport) +{ + uport->ops->start_rx(uport); +} + +static void qcom_geni_serial_stop_rx(struct uart_port *uport) +{ + uport->ops->stop_rx(uport); +} + +static void qcom_geni_serial_stop_tx(struct uart_port *uport) +{ + uport->ops->stop_tx(uport); +} + static void qcom_geni_serial_send_chunk_fifo(struct uart_port *uport, unsigned int chunk) { @@ -731,8 +878,8 @@ static void qcom_geni_serial_send_chunk_fifo(struct uart_port *uport, } } -static void qcom_geni_serial_handle_tx(struct uart_port *uport, bool done, - bool active) +static void qcom_geni_serial_handle_tx_fifo(struct uart_port *uport, + bool done, bool active) { struct qcom_geni_serial_port *port = to_dev_port(uport); struct circ_buf *xmit = &uport->state->xmit; @@ -752,7 +899,7 @@ static void qcom_geni_serial_handle_tx(struct uart_port *uport, bool done, /* All data has been transmitted and acknowledged as received */ if (!pending && !status && done) { - qcom_geni_serial_stop_tx(uport); + qcom_geni_serial_stop_tx_fifo(uport); goto out_write_wakeup; } @@ -795,12 +942,32 @@ static void qcom_geni_serial_handle_tx(struct uart_port *uport, bool done, uart_write_wakeup(uport); } +static void qcom_geni_serial_handle_tx_dma(struct uart_port *uport) +{ + struct qcom_geni_serial_port *port = to_dev_port(uport); + struct circ_buf *xmit = &uport->state->xmit; + + uart_xmit_advance(uport, port->tx_remaining); + geni_se_tx_dma_unprep(&port->se, port->tx_dma_addr, port->tx_remaining); + port->tx_dma_addr = 0; + port->tx_remaining = 0; + + if (!uart_circ_empty(xmit)) + qcom_geni_serial_start_tx_dma(uport); + + if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + uart_write_wakeup(uport); +} + static irqreturn_t qcom_geni_serial_isr(int isr, void *dev) { u32 m_irq_en; u32 m_irq_status; u32 s_irq_status; u32 geni_status; + u32 dma; + u32 dma_tx_status; + u32 dma_rx_status; struct uart_port *uport = dev; bool drop_rx = false; struct tty_port *tport = &uport->state->port; @@ -813,10 +980,15 @@ static irqreturn_t qcom_geni_serial_isr(int isr, void *dev) m_irq_status = readl(uport->membase + SE_GENI_M_IRQ_STATUS); s_irq_status = readl(uport->membase + SE_GENI_S_IRQ_STATUS); + dma_tx_status = readl(uport->membase + SE_DMA_TX_IRQ_STAT); + dma_rx_status = readl(uport->membase + SE_DMA_RX_IRQ_STAT); geni_status = readl(uport->membase + SE_GENI_STATUS); + dma = readl(uport->membase + SE_GENI_DMA_MODE_EN); m_irq_en = readl(uport->membase + SE_GENI_M_IRQ_EN); writel(m_irq_status, uport->membase + SE_GENI_M_IRQ_CLEAR); writel(s_irq_status, uport->membase + SE_GENI_S_IRQ_CLEAR); + writel(dma_tx_status, uport->membase + SE_DMA_TX_IRQ_CLR); + writel(dma_rx_status, uport->membase + SE_DMA_RX_IRQ_CLR); if (WARN_ON(m_irq_status & M_ILLEGAL_CMD_EN)) goto out_unlock; @@ -826,10 +998,6 @@ static irqreturn_t qcom_geni_serial_isr(int isr, void *dev) tty_insert_flip_char(tport, 0, TTY_OVERRUN); } - if (m_irq_status & m_irq_en & (M_TX_FIFO_WATERMARK_EN | M_CMD_DONE_EN)) - qcom_geni_serial_handle_tx(uport, m_irq_status & M_CMD_DONE_EN, - geni_status & M_GENI_CMD_ACTIVE); - if (s_irq_status & (S_GP_IRQ_0_EN | S_GP_IRQ_1_EN)) { if (s_irq_status & S_GP_IRQ_0_EN) uport->icount.parity++; @@ -839,8 +1007,35 @@ static irqreturn_t qcom_geni_serial_isr(int isr, void *dev) port->brk = true; } - if (s_irq_status & (S_RX_FIFO_WATERMARK_EN | S_RX_FIFO_LAST_EN)) - qcom_geni_serial_handle_rx(uport, drop_rx); + if (dma) { + if (dma_tx_status & TX_DMA_DONE) + qcom_geni_serial_handle_tx_dma(uport); + + if (dma_rx_status) { + if (dma_rx_status & RX_RESET_DONE) + goto out_unlock; + + if (dma_rx_status & RX_DMA_PARITY_ERR) { + uport->icount.parity++; + drop_rx = true; + } + + if (dma_rx_status & RX_DMA_BREAK) + uport->icount.brk++; + + if (dma_rx_status & (RX_DMA_DONE | RX_EOT)) + qcom_geni_serial_handle_rx_dma(uport, drop_rx); + } + } else { + if (m_irq_status & m_irq_en & + (M_TX_FIFO_WATERMARK_EN | M_CMD_DONE_EN)) + qcom_geni_serial_handle_tx_fifo(uport, + m_irq_status & M_CMD_DONE_EN, + geni_status & M_GENI_CMD_ACTIVE); + + if (s_irq_status & (S_RX_FIFO_WATERMARK_EN | S_RX_FIFO_LAST_EN)) + qcom_geni_serial_handle_rx_fifo(uport, drop_rx); + } out_unlock: uart_unlock_and_check_sysrq(uport); @@ -909,7 +1104,7 @@ static int qcom_geni_serial_port_setup(struct uart_port *uport) geni_se_config_packing(&port->se, BITS_PER_BYTE, BYTES_PER_FIFO_WORD, false, true, true); geni_se_init(&port->se, UART_RX_WM, port->rx_fifo_depth - 2); - geni_se_select_mode(&port->se, GENI_SE_FIFO); + geni_se_select_mode(&port->se, port->dev_data->mode); port->setup = true; return 0; @@ -1307,10 +1502,10 @@ static void qcom_geni_serial_pm(struct uart_port *uport, static const struct uart_ops qcom_geni_console_pops = { .tx_empty = qcom_geni_serial_tx_empty, - .stop_tx = qcom_geni_serial_stop_tx, - .start_tx = qcom_geni_serial_start_tx, - .stop_rx = qcom_geni_serial_stop_rx, - .start_rx = qcom_geni_serial_start_rx, + .stop_tx = qcom_geni_serial_stop_tx_fifo, + .start_tx = qcom_geni_serial_start_tx_fifo, + .stop_rx = qcom_geni_serial_stop_rx_fifo, + .start_rx = qcom_geni_serial_start_rx_fifo, .set_termios = qcom_geni_serial_set_termios, .startup = qcom_geni_serial_startup, .request_port = qcom_geni_serial_request_port, @@ -1328,9 +1523,10 @@ static const struct uart_ops qcom_geni_console_pops = { static const struct uart_ops qcom_geni_uart_pops = { .tx_empty = qcom_geni_serial_tx_empty, - .stop_tx = qcom_geni_serial_stop_tx, - .start_tx = qcom_geni_serial_start_tx, - .stop_rx = qcom_geni_serial_stop_rx, + .stop_tx = qcom_geni_serial_stop_tx_dma, + .start_tx = qcom_geni_serial_start_tx_dma, + .start_rx = qcom_geni_serial_start_rx_dma, + .stop_rx = qcom_geni_serial_stop_rx_dma, .set_termios = qcom_geni_serial_set_termios, .startup = qcom_geni_serial_startup, .request_port = qcom_geni_serial_request_port, @@ -1399,9 +1595,9 @@ static int qcom_geni_serial_probe(struct platform_device *pdev) port->tx_fifo_width = DEF_FIFO_WIDTH_BITS; if (!data->console) { - port->rx_fifo = devm_kcalloc(uport->dev, - port->rx_fifo_depth, sizeof(u32), GFP_KERNEL); - if (!port->rx_fifo) + port->rx_buf = devm_kzalloc(uport->dev, + DMA_RX_BUF_SIZE, GFP_KERNEL); + if (!port->rx_buf) return -ENOMEM; } @@ -1531,12 +1727,12 @@ static int __maybe_unused qcom_geni_serial_sys_resume(struct device *dev) static const struct qcom_geni_device_data qcom_geni_console_data = { .console = true, - .handle_rx = handle_rx_console, + .mode = GENI_SE_FIFO, }; static const struct qcom_geni_device_data qcom_geni_uart_data = { .console = false, - .handle_rx = handle_rx_uart, + .mode = GENI_SE_DMA, }; static const struct dev_pm_ops qcom_geni_serial_pm_ops = {