From patchwork Wed Jan 11 10:52:46 2023 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 8bit X-Patchwork-Submitter: Hans Verkuil X-Patchwork-Id: 13096402 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id 81149C67871 for ; Wed, 11 Jan 2023 10:53:46 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S238398AbjAKKxV (ORCPT ); Wed, 11 Jan 2023 05:53:21 -0500 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:37176 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S238543AbjAKKxK (ORCPT ); Wed, 11 Jan 2023 05:53:10 -0500 Received: from ams.source.kernel.org (ams.source.kernel.org [145.40.68.75]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 7BB371014 for ; Wed, 11 Jan 2023 02:53:05 -0800 (PST) Received: from smtp.kernel.org (relay.kernel.org [52.25.139.140]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by ams.source.kernel.org (Postfix) with ESMTPS id CA761B81BAE for ; Wed, 11 Jan 2023 10:53:03 +0000 (UTC) Received: by smtp.kernel.org (Postfix) with ESMTPSA id 81A36C433F0; Wed, 11 Jan 2023 10:53:01 +0000 (UTC) From: Hans Verkuil To: linux-media@vger.kernel.org Cc: Lad Prabhakar , Hans Verkuil Subject: [PATCH 01/13] meye: remove this deprecated driver Date: Wed, 11 Jan 2023 11:52:46 +0100 Message-Id: <20230111105258.547471-2-hverkuil-cisco@xs4all.nl> X-Mailer: git-send-email 2.39.0 In-Reply-To: <20230111105258.547471-1-hverkuil-cisco@xs4all.nl> References: <20230111105258.547471-1-hverkuil-cisco@xs4all.nl> MIME-Version: 1.0 Precedence: bulk List-ID: X-Mailing-List: linux-media@vger.kernel.org The meye driver does not use the vb2 framework for streaming video, instead it implements this in the driver. This is error prone, and nobody stepped in to convert this driver to that framework. The hardware is very old, so the decision was made to remove it altogether. Signed-off-by: Hans Verkuil --- Documentation/admin-guide/media/meye.rst | 93 - .../admin-guide/media/pci-cardlist.rst | 1 - .../admin-guide/media/v4l-drivers.rst | 1 - .../userspace-api/media/drivers/index.rst | 1 - .../userspace-api/media/drivers/meye-uapi.rst | 53 - MAINTAINERS | 8 - drivers/staging/media/Kconfig | 1 - drivers/staging/media/Makefile | 1 - drivers/staging/media/deprecated/meye/Kconfig | 19 - .../staging/media/deprecated/meye/Makefile | 2 - drivers/staging/media/deprecated/meye/TODO | 6 - drivers/staging/media/deprecated/meye/meye.c | 1814 ----------------- drivers/staging/media/deprecated/meye/meye.h | 311 --- include/uapi/linux/meye.h | 65 - include/uapi/linux/v4l2-controls.h | 8 +- 15 files changed, 6 insertions(+), 2378 deletions(-) delete mode 100644 Documentation/admin-guide/media/meye.rst delete mode 100644 Documentation/userspace-api/media/drivers/meye-uapi.rst delete mode 100644 drivers/staging/media/deprecated/meye/Kconfig delete mode 100644 drivers/staging/media/deprecated/meye/Makefile delete mode 100644 drivers/staging/media/deprecated/meye/TODO delete mode 100644 drivers/staging/media/deprecated/meye/meye.c delete mode 100644 drivers/staging/media/deprecated/meye/meye.h delete mode 100644 include/uapi/linux/meye.h diff --git a/Documentation/admin-guide/media/meye.rst b/Documentation/admin-guide/media/meye.rst deleted file mode 100644 index 9098a1e65f8b..000000000000 --- a/Documentation/admin-guide/media/meye.rst +++ /dev/null @@ -1,93 +0,0 @@ -.. SPDX-License-Identifier: GPL-2.0 - -.. include:: - -Vaio Picturebook Motion Eye Camera Driver -========================================= - -Copyright |copy| 2001-2004 Stelian Pop - -Copyright |copy| 2001-2002 Alcôve - -Copyright |copy| 2000 Andrew Tridgell - -This driver enable the use of video4linux compatible applications with the -Motion Eye camera. This driver requires the "Sony Laptop Extras" driver (which -can be found in the "Misc devices" section of the kernel configuration utility) -to be compiled and installed (using its "camera=1" parameter). - -It can do at maximum 30 fps @ 320x240 or 15 fps @ 640x480. - -Grabbing is supported in packed YUV colorspace only. - -MJPEG hardware grabbing is supported via a private API (see below). - -Hardware supported ------------------- - -This driver supports the 'second' version of the MotionEye camera :) - -The first version was connected directly on the video bus of the Neomagic -video card and is unsupported. - -The second one, made by Kawasaki Steel is fully supported by this -driver (PCI vendor/device is 0x136b/0xff01) - -The third one, present in recent (more or less last year) Picturebooks -(C1M* models), is not supported. The manufacturer has given the specs -to the developers under a NDA (which allows the development of a GPL -driver however), but things are not moving very fast (see -http://r-engine.sourceforge.net/) (PCI vendor/device is 0x10cf/0x2011). - -There is a forth model connected on the USB bus in TR1* Vaio laptops. -This camera is not supported at all by the current driver, in fact -little information if any is available for this camera -(USB vendor/device is 0x054c/0x0107). - -Driver options --------------- - -Several options can be passed to the meye driver using the standard -module argument syntax (= when passing the option to the -module or meye.= on the kernel boot line when meye is -statically linked into the kernel). Those options are: - -.. code-block:: none - - gbuffers: number of capture buffers, default is 2 (32 max) - - gbufsize: size of each capture buffer, default is 614400 - - video_nr: video device to register (0 = /dev/video0, etc) - -Module use ----------- - -In order to automatically load the meye module on use, you can put those lines -in your /etc/modprobe.d/meye.conf file: - -.. code-block:: none - - alias char-major-81 videodev - alias char-major-81-0 meye - options meye gbuffers=32 - -Usage: ------- - -.. code-block:: none - - xawtv >= 3.49 () - for display and uncompressed video capture: - - xawtv -c /dev/video0 -geometry 640x480 - or - xawtv -c /dev/video0 -geometry 320x240 - - motioneye () - for getting ppm or jpg snapshots, mjpeg video - -Bugs / Todo ------------ - -- 'motioneye' still uses the meye private v4l1 API extensions. diff --git a/Documentation/admin-guide/media/pci-cardlist.rst b/Documentation/admin-guide/media/pci-cardlist.rst index f4d670e632f8..42528795d4da 100644 --- a/Documentation/admin-guide/media/pci-cardlist.rst +++ b/Documentation/admin-guide/media/pci-cardlist.rst @@ -77,7 +77,6 @@ ipu3-cio2 Intel ipu3-cio2 driver ivtv Conexant cx23416/cx23415 MPEG encoder/decoder ivtvfb Conexant cx23415 framebuffer mantis MANTIS based cards -meye Sony Vaio Picturebook Motion Eye mxb Siemens-Nixdorf 'Multimedia eXtension Board' netup-unidvb NetUP Universal DVB card ngene Micronas nGene diff --git a/Documentation/admin-guide/media/v4l-drivers.rst b/Documentation/admin-guide/media/v4l-drivers.rst index 90a026ee05c6..adb5240d0407 100644 --- a/Documentation/admin-guide/media/v4l-drivers.rst +++ b/Documentation/admin-guide/media/v4l-drivers.rst @@ -19,7 +19,6 @@ Video4Linux (V4L) driver-specific documentation imx7 ipu3 ivtv - meye omap3isp omap4_camera philips diff --git a/Documentation/userspace-api/media/drivers/index.rst b/Documentation/userspace-api/media/drivers/index.rst index 915dbf0f4db5..6708d649afd7 100644 --- a/Documentation/userspace-api/media/drivers/index.rst +++ b/Documentation/userspace-api/media/drivers/index.rst @@ -37,7 +37,6 @@ For more details see the file COPYING in the source distribution of Linux. dw100 imx-uapi max2175 - meye-uapi omap3isp-uapi st-vgxy61 uvcvideo diff --git a/Documentation/userspace-api/media/drivers/meye-uapi.rst b/Documentation/userspace-api/media/drivers/meye-uapi.rst deleted file mode 100644 index 66b1c142f920..000000000000 --- a/Documentation/userspace-api/media/drivers/meye-uapi.rst +++ /dev/null @@ -1,53 +0,0 @@ -.. SPDX-License-Identifier: GPL-2.0 - -.. include:: - -Vaio Picturebook Motion Eye Camera Driver -========================================= - -Copyright |copy| 2001-2004 Stelian Pop - -Copyright |copy| 2001-2002 Alcôve - -Copyright |copy| 2000 Andrew Tridgell - -Private API ------------ - -The driver supports frame grabbing with the video4linux API, -so all video4linux tools (like xawtv) should work with this driver. - -Besides the video4linux interface, the driver has a private interface -for accessing the Motion Eye extended parameters (camera sharpness, -agc, video framerate), the snapshot and the MJPEG capture facilities. - -This interface consists of several ioctls (prototypes and structures -can be found in include/linux/meye.h): - -MEYEIOC_G_PARAMS and MEYEIOC_S_PARAMS - Get and set the extended parameters of the motion eye camera. - The user should always query the current parameters with - MEYEIOC_G_PARAMS, change what he likes and then issue the - MEYEIOC_S_PARAMS call (checking for -EINVAL). The extended - parameters are described by the meye_params structure. - - -MEYEIOC_QBUF_CAPT - Queue a buffer for capture (the buffers must have been - obtained with a VIDIOCGMBUF call and mmap'ed by the - application). The argument to MEYEIOC_QBUF_CAPT is the - buffer number to queue (or -1 to end capture). The first - call to MEYEIOC_QBUF_CAPT starts the streaming capture. - -MEYEIOC_SYNC - Takes as an argument the buffer number you want to sync. - This ioctl blocks until the buffer is filled and ready - for the application to use. It returns the buffer size. - -MEYEIOC_STILLCAPT and MEYEIOC_STILLJCAPT - Takes a snapshot in an uncompressed or compressed jpeg format. - This ioctl blocks until the snapshot is done and returns (for - jpeg snapshot) the size of the image. The image data is - available from the first mmap'ed buffer. - -Look at the 'motioneye' application code for an actual example. diff --git a/MAINTAINERS b/MAINTAINERS index f61eb221415b..f814ab594ea4 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -13071,7 +13071,6 @@ F: include/media/ F: include/uapi/linux/dvb/ F: include/uapi/linux/ivtv* F: include/uapi/linux/media.h -F: include/uapi/linux/meye.h F: include/uapi/linux/uvcvideo.h F: include/uapi/linux/v4l2-* F: include/uapi/linux/videodev2.h @@ -14150,13 +14149,6 @@ F: drivers/regulator/mpq7920.c F: drivers/regulator/mpq7920.h F: include/linux/mfd/mp2629.h -MOTION EYE VAIO PICTUREBOOK CAMERA DRIVER -S: Orphan -W: http://popies.net/meye/ -F: Documentation/userspace-api/media/drivers/meye* -F: drivers/staging/media/deprecated/meye/ -F: include/uapi/linux/meye.h - MOTORCOMM PHY DRIVER M: Peter Geis M: Frank diff --git a/drivers/staging/media/Kconfig b/drivers/staging/media/Kconfig index b79f93684c4f..c312fe741a30 100644 --- a/drivers/staging/media/Kconfig +++ b/drivers/staging/media/Kconfig @@ -54,7 +54,6 @@ if STAGING_MEDIA_DEPRECATED source "drivers/staging/media/deprecated/atmel/Kconfig" source "drivers/staging/media/deprecated/cpia2/Kconfig" source "drivers/staging/media/deprecated/fsl-viu/Kconfig" -source "drivers/staging/media/deprecated/meye/Kconfig" source "drivers/staging/media/deprecated/saa7146/Kconfig" source "drivers/staging/media/deprecated/stkwebcam/Kconfig" source "drivers/staging/media/deprecated/tm6000/Kconfig" diff --git a/drivers/staging/media/Makefile b/drivers/staging/media/Makefile index 54bbdd4b0d08..f61ab43625b3 100644 --- a/drivers/staging/media/Makefile +++ b/drivers/staging/media/Makefile @@ -5,7 +5,6 @@ obj-$(CONFIG_VIDEO_CPIA2) += deprecated/cpia2/ obj-$(CONFIG_VIDEO_IMX_MEDIA) += imx/ obj-$(CONFIG_VIDEO_MAX96712) += max96712/ obj-$(CONFIG_VIDEO_MESON_VDEC) += meson/vdec/ -obj-$(CONFIG_VIDEO_MEYE) += deprecated/meye/ obj-$(CONFIG_VIDEO_OMAP4) += omap4iss/ obj-$(CONFIG_VIDEO_ROCKCHIP_VDEC) += rkvdec/ obj-$(CONFIG_VIDEO_STKWEBCAM) += deprecated/stkwebcam/ diff --git a/drivers/staging/media/deprecated/meye/Kconfig b/drivers/staging/media/deprecated/meye/Kconfig deleted file mode 100644 index f135f8568c85..000000000000 --- a/drivers/staging/media/deprecated/meye/Kconfig +++ /dev/null @@ -1,19 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0-only -config VIDEO_MEYE - tristate "Sony Vaio Picturebook Motion Eye Video For Linux (DEPRECATED)" - depends on PCI && VIDEO_DEV - depends on SONY_LAPTOP - depends on X86 || COMPILE_TEST - help - This is the video4linux driver for the Motion Eye camera found - in the Vaio Picturebook laptops. Please read the material in - for more information. - - If you say Y or M here, you need to say Y or M to "Sony Laptop - Extras" in the misc device section. - - This driver is deprecated and is scheduled for removal by - the beginning of 2023. See the TODO file for more information. - - To compile this driver as a module, choose M here: the - module will be called meye. diff --git a/drivers/staging/media/deprecated/meye/Makefile b/drivers/staging/media/deprecated/meye/Makefile deleted file mode 100644 index 36f1f86f0d58..000000000000 --- a/drivers/staging/media/deprecated/meye/Makefile +++ /dev/null @@ -1,2 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0-only -obj-$(CONFIG_VIDEO_MEYE) += meye.o diff --git a/drivers/staging/media/deprecated/meye/TODO b/drivers/staging/media/deprecated/meye/TODO deleted file mode 100644 index 6d1d1433d5a0..000000000000 --- a/drivers/staging/media/deprecated/meye/TODO +++ /dev/null @@ -1,6 +0,0 @@ -The meye driver does not use the vb2 framework for streaming -video, instead it implements this in the driver. - -To prevent removal of this driver early 2023 it has to be -converted to use vb2. Contact the linux-media@vger.kernel.org -mailing list if you want to do this. diff --git a/drivers/staging/media/deprecated/meye/meye.c b/drivers/staging/media/deprecated/meye/meye.c deleted file mode 100644 index 5d87efd9b95c..000000000000 --- a/drivers/staging/media/deprecated/meye/meye.c +++ /dev/null @@ -1,1814 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/* - * Motion Eye video4linux driver for Sony Vaio PictureBook - * - * Copyright (C) 2001-2004 Stelian Pop - * - * Copyright (C) 2001-2002 Alcôve - * - * Copyright (C) 2000 Andrew Tridgell - * - * Earlier work by Werner Almesberger, Paul `Rusty' Russell and Paul Mackerras. - * - * Some parts borrowed from various video4linux drivers, especially - * bttv-driver.c and zoran.c, see original files for credits. - */ -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include "meye.h" -#include - -MODULE_AUTHOR("Stelian Pop "); -MODULE_DESCRIPTION("v4l2 driver for the MotionEye camera"); -MODULE_LICENSE("GPL"); -MODULE_VERSION(MEYE_DRIVER_VERSION); - -/* number of grab buffers */ -static unsigned int gbuffers = 2; -module_param(gbuffers, int, 0444); -MODULE_PARM_DESC(gbuffers, "number of capture buffers, default is 2 (32 max)"); - -/* size of a grab buffer */ -static unsigned int gbufsize = MEYE_MAX_BUFSIZE; -module_param(gbufsize, int, 0444); -MODULE_PARM_DESC(gbufsize, "size of the capture buffers, default is 614400 (will be rounded up to a page multiple)"); - -/* /dev/videoX registration number */ -static int video_nr = -1; -module_param(video_nr, int, 0444); -MODULE_PARM_DESC(video_nr, "video device to register (0=/dev/video0, etc)"); - -/* driver structure - only one possible */ -static struct meye meye; - -/****************************************************************************/ -/* Memory allocation routines (stolen from bttv-driver.c) */ -/****************************************************************************/ -static void *rvmalloc(unsigned long size) -{ - void *mem; - unsigned long adr; - - size = PAGE_ALIGN(size); - mem = vmalloc_32(size); - if (mem) { - memset(mem, 0, size); - adr = (unsigned long) mem; - while (size > 0) { - SetPageReserved(vmalloc_to_page((void *)adr)); - adr += PAGE_SIZE; - size -= PAGE_SIZE; - } - } - return mem; -} - -static void rvfree(void * mem, unsigned long size) -{ - unsigned long adr; - - if (mem) { - adr = (unsigned long) mem; - while ((long) size > 0) { - ClearPageReserved(vmalloc_to_page((void *)adr)); - adr += PAGE_SIZE; - size -= PAGE_SIZE; - } - vfree(mem); - } -} - -/* - * return a page table pointing to N pages of locked memory - * - * NOTE: The meye device expects DMA addresses on 32 bits, we build - * a table of 1024 entries = 4 bytes * 1024 = 4096 bytes. - */ -static int ptable_alloc(void) -{ - u32 *pt; - int i; - - memset(meye.mchip_ptable, 0, sizeof(meye.mchip_ptable)); - - /* give only 32 bit DMA addresses */ - if (dma_set_mask(&meye.mchip_dev->dev, DMA_BIT_MASK(32))) - return -1; - - meye.mchip_ptable_toc = dma_alloc_coherent(&meye.mchip_dev->dev, - PAGE_SIZE, - &meye.mchip_dmahandle, - GFP_KERNEL); - if (!meye.mchip_ptable_toc) { - meye.mchip_dmahandle = 0; - return -1; - } - - pt = meye.mchip_ptable_toc; - for (i = 0; i < MCHIP_NB_PAGES; i++) { - dma_addr_t dma; - meye.mchip_ptable[i] = dma_alloc_coherent(&meye.mchip_dev->dev, - PAGE_SIZE, - &dma, - GFP_KERNEL); - if (!meye.mchip_ptable[i]) { - int j; - pt = meye.mchip_ptable_toc; - for (j = 0; j < i; ++j) { - dma = (dma_addr_t) *pt; - dma_free_coherent(&meye.mchip_dev->dev, - PAGE_SIZE, - meye.mchip_ptable[j], dma); - pt++; - } - dma_free_coherent(&meye.mchip_dev->dev, - PAGE_SIZE, - meye.mchip_ptable_toc, - meye.mchip_dmahandle); - meye.mchip_ptable_toc = NULL; - meye.mchip_dmahandle = 0; - return -1; - } - *pt = (u32) dma; - pt++; - } - return 0; -} - -static void ptable_free(void) -{ - u32 *pt; - int i; - - pt = meye.mchip_ptable_toc; - for (i = 0; i < MCHIP_NB_PAGES; i++) { - dma_addr_t dma = (dma_addr_t) *pt; - if (meye.mchip_ptable[i]) - dma_free_coherent(&meye.mchip_dev->dev, - PAGE_SIZE, - meye.mchip_ptable[i], dma); - pt++; - } - - if (meye.mchip_ptable_toc) - dma_free_coherent(&meye.mchip_dev->dev, - PAGE_SIZE, - meye.mchip_ptable_toc, - meye.mchip_dmahandle); - - memset(meye.mchip_ptable, 0, sizeof(meye.mchip_ptable)); - meye.mchip_ptable_toc = NULL; - meye.mchip_dmahandle = 0; -} - -/* copy data from ptable into buf */ -static void ptable_copy(u8 *buf, int start, int size, int pt_pages) -{ - int i; - - for (i = 0; i < (size / PAGE_SIZE) * PAGE_SIZE; i += PAGE_SIZE) { - memcpy(buf + i, meye.mchip_ptable[start++], PAGE_SIZE); - if (start >= pt_pages) - start = 0; - } - memcpy(buf + i, meye.mchip_ptable[start], size % PAGE_SIZE); -} - -/****************************************************************************/ -/* JPEG tables at different qualities to load into the VRJ chip */ -/****************************************************************************/ - -/* return a set of quantisation tables based on a quality from 1 to 10 */ -static u16 *jpeg_quantisation_tables(int *length, int quality) -{ - static u16 jpeg_tables[][70] = { { - 0xdbff, 0x4300, 0xff00, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, - 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, - 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, - 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, - 0xffff, 0xffff, 0xffff, - 0xdbff, 0x4300, 0xff01, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, - 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, - 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, - 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, - 0xffff, 0xffff, 0xffff, - }, - { - 0xdbff, 0x4300, 0x5000, 0x3c37, 0x3c46, 0x5032, 0x4146, 0x5a46, - 0x5055, 0x785f, 0x82c8, 0x6e78, 0x786e, 0xaff5, 0x91b9, 0xffc8, - 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, - 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, - 0xffff, 0xffff, 0xffff, - 0xdbff, 0x4300, 0x5501, 0x5a5a, 0x6978, 0xeb78, 0x8282, 0xffeb, - 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, - 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, - 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, - 0xffff, 0xffff, 0xffff, - }, - { - 0xdbff, 0x4300, 0x2800, 0x1e1c, 0x1e23, 0x2819, 0x2123, 0x2d23, - 0x282b, 0x3c30, 0x4164, 0x373c, 0x3c37, 0x587b, 0x495d, 0x9164, - 0x9980, 0x8f96, 0x8c80, 0xa08a, 0xe6b4, 0xa0c3, 0xdaaa, 0x8aad, - 0xc88c, 0xcbff, 0xeeda, 0xfff5, 0xffff, 0xc19b, 0xffff, 0xfaff, - 0xe6ff, 0xfffd, 0xfff8, - 0xdbff, 0x4300, 0x2b01, 0x2d2d, 0x353c, 0x763c, 0x4141, 0xf876, - 0x8ca5, 0xf8a5, 0xf8f8, 0xf8f8, 0xf8f8, 0xf8f8, 0xf8f8, 0xf8f8, - 0xf8f8, 0xf8f8, 0xf8f8, 0xf8f8, 0xf8f8, 0xf8f8, 0xf8f8, 0xf8f8, - 0xf8f8, 0xf8f8, 0xf8f8, 0xf8f8, 0xf8f8, 0xf8f8, 0xf8f8, 0xf8f8, - 0xf8f8, 0xf8f8, 0xfff8, - }, - { - 0xdbff, 0x4300, 0x1b00, 0x1412, 0x1417, 0x1b11, 0x1617, 0x1e17, - 0x1b1c, 0x2820, 0x2b42, 0x2528, 0x2825, 0x3a51, 0x303d, 0x6042, - 0x6555, 0x5f64, 0x5d55, 0x6a5b, 0x9978, 0x6a81, 0x9071, 0x5b73, - 0x855d, 0x86b5, 0x9e90, 0xaba3, 0xabad, 0x8067, 0xc9bc, 0xa6ba, - 0x99c7, 0xaba8, 0xffa4, - 0xdbff, 0x4300, 0x1c01, 0x1e1e, 0x2328, 0x4e28, 0x2b2b, 0xa44e, - 0x5d6e, 0xa46e, 0xa4a4, 0xa4a4, 0xa4a4, 0xa4a4, 0xa4a4, 0xa4a4, - 0xa4a4, 0xa4a4, 0xa4a4, 0xa4a4, 0xa4a4, 0xa4a4, 0xa4a4, 0xa4a4, - 0xa4a4, 0xa4a4, 0xa4a4, 0xa4a4, 0xa4a4, 0xa4a4, 0xa4a4, 0xa4a4, - 0xa4a4, 0xa4a4, 0xffa4, - }, - { - 0xdbff, 0x4300, 0x1400, 0x0f0e, 0x0f12, 0x140d, 0x1012, 0x1712, - 0x1415, 0x1e18, 0x2132, 0x1c1e, 0x1e1c, 0x2c3d, 0x242e, 0x4932, - 0x4c40, 0x474b, 0x4640, 0x5045, 0x735a, 0x5062, 0x6d55, 0x4556, - 0x6446, 0x6588, 0x776d, 0x817b, 0x8182, 0x604e, 0x978d, 0x7d8c, - 0x7396, 0x817e, 0xff7c, - 0xdbff, 0x4300, 0x1501, 0x1717, 0x1a1e, 0x3b1e, 0x2121, 0x7c3b, - 0x4653, 0x7c53, 0x7c7c, 0x7c7c, 0x7c7c, 0x7c7c, 0x7c7c, 0x7c7c, - 0x7c7c, 0x7c7c, 0x7c7c, 0x7c7c, 0x7c7c, 0x7c7c, 0x7c7c, 0x7c7c, - 0x7c7c, 0x7c7c, 0x7c7c, 0x7c7c, 0x7c7c, 0x7c7c, 0x7c7c, 0x7c7c, - 0x7c7c, 0x7c7c, 0xff7c, - }, - { - 0xdbff, 0x4300, 0x1000, 0x0c0b, 0x0c0e, 0x100a, 0x0d0e, 0x120e, - 0x1011, 0x1813, 0x1a28, 0x1618, 0x1816, 0x2331, 0x1d25, 0x3a28, - 0x3d33, 0x393c, 0x3833, 0x4037, 0x5c48, 0x404e, 0x5744, 0x3745, - 0x5038, 0x516d, 0x5f57, 0x6762, 0x6768, 0x4d3e, 0x7971, 0x6470, - 0x5c78, 0x6765, 0xff63, - 0xdbff, 0x4300, 0x1101, 0x1212, 0x1518, 0x2f18, 0x1a1a, 0x632f, - 0x3842, 0x6342, 0x6363, 0x6363, 0x6363, 0x6363, 0x6363, 0x6363, - 0x6363, 0x6363, 0x6363, 0x6363, 0x6363, 0x6363, 0x6363, 0x6363, - 0x6363, 0x6363, 0x6363, 0x6363, 0x6363, 0x6363, 0x6363, 0x6363, - 0x6363, 0x6363, 0xff63, - }, - { - 0xdbff, 0x4300, 0x0d00, 0x0a09, 0x0a0b, 0x0d08, 0x0a0b, 0x0e0b, - 0x0d0e, 0x130f, 0x1520, 0x1213, 0x1312, 0x1c27, 0x171e, 0x2e20, - 0x3129, 0x2e30, 0x2d29, 0x332c, 0x4a3a, 0x333e, 0x4636, 0x2c37, - 0x402d, 0x4157, 0x4c46, 0x524e, 0x5253, 0x3e32, 0x615a, 0x505a, - 0x4a60, 0x5251, 0xff4f, - 0xdbff, 0x4300, 0x0e01, 0x0e0e, 0x1113, 0x2613, 0x1515, 0x4f26, - 0x2d35, 0x4f35, 0x4f4f, 0x4f4f, 0x4f4f, 0x4f4f, 0x4f4f, 0x4f4f, - 0x4f4f, 0x4f4f, 0x4f4f, 0x4f4f, 0x4f4f, 0x4f4f, 0x4f4f, 0x4f4f, - 0x4f4f, 0x4f4f, 0x4f4f, 0x4f4f, 0x4f4f, 0x4f4f, 0x4f4f, 0x4f4f, - 0x4f4f, 0x4f4f, 0xff4f, - }, - { - 0xdbff, 0x4300, 0x0a00, 0x0707, 0x0708, 0x0a06, 0x0808, 0x0b08, - 0x0a0a, 0x0e0b, 0x1018, 0x0d0e, 0x0e0d, 0x151d, 0x1116, 0x2318, - 0x251f, 0x2224, 0x221f, 0x2621, 0x372b, 0x262f, 0x3429, 0x2129, - 0x3022, 0x3141, 0x3934, 0x3e3b, 0x3e3e, 0x2e25, 0x4944, 0x3c43, - 0x3748, 0x3e3d, 0xff3b, - 0xdbff, 0x4300, 0x0a01, 0x0b0b, 0x0d0e, 0x1c0e, 0x1010, 0x3b1c, - 0x2228, 0x3b28, 0x3b3b, 0x3b3b, 0x3b3b, 0x3b3b, 0x3b3b, 0x3b3b, - 0x3b3b, 0x3b3b, 0x3b3b, 0x3b3b, 0x3b3b, 0x3b3b, 0x3b3b, 0x3b3b, - 0x3b3b, 0x3b3b, 0x3b3b, 0x3b3b, 0x3b3b, 0x3b3b, 0x3b3b, 0x3b3b, - 0x3b3b, 0x3b3b, 0xff3b, - }, - { - 0xdbff, 0x4300, 0x0600, 0x0504, 0x0506, 0x0604, 0x0506, 0x0706, - 0x0607, 0x0a08, 0x0a10, 0x090a, 0x0a09, 0x0e14, 0x0c0f, 0x1710, - 0x1814, 0x1718, 0x1614, 0x1a16, 0x251d, 0x1a1f, 0x231b, 0x161c, - 0x2016, 0x202c, 0x2623, 0x2927, 0x292a, 0x1f19, 0x302d, 0x282d, - 0x2530, 0x2928, 0xff28, - 0xdbff, 0x4300, 0x0701, 0x0707, 0x080a, 0x130a, 0x0a0a, 0x2813, - 0x161a, 0x281a, 0x2828, 0x2828, 0x2828, 0x2828, 0x2828, 0x2828, - 0x2828, 0x2828, 0x2828, 0x2828, 0x2828, 0x2828, 0x2828, 0x2828, - 0x2828, 0x2828, 0x2828, 0x2828, 0x2828, 0x2828, 0x2828, 0x2828, - 0x2828, 0x2828, 0xff28, - }, - { - 0xdbff, 0x4300, 0x0300, 0x0202, 0x0203, 0x0302, 0x0303, 0x0403, - 0x0303, 0x0504, 0x0508, 0x0405, 0x0504, 0x070a, 0x0607, 0x0c08, - 0x0c0a, 0x0b0c, 0x0b0a, 0x0d0b, 0x120e, 0x0d10, 0x110e, 0x0b0e, - 0x100b, 0x1016, 0x1311, 0x1514, 0x1515, 0x0f0c, 0x1817, 0x1416, - 0x1218, 0x1514, 0xff14, - 0xdbff, 0x4300, 0x0301, 0x0404, 0x0405, 0x0905, 0x0505, 0x1409, - 0x0b0d, 0x140d, 0x1414, 0x1414, 0x1414, 0x1414, 0x1414, 0x1414, - 0x1414, 0x1414, 0x1414, 0x1414, 0x1414, 0x1414, 0x1414, 0x1414, - 0x1414, 0x1414, 0x1414, 0x1414, 0x1414, 0x1414, 0x1414, 0x1414, - 0x1414, 0x1414, 0xff14, - }, - { - 0xdbff, 0x4300, 0x0100, 0x0101, 0x0101, 0x0101, 0x0101, 0x0101, - 0x0101, 0x0101, 0x0101, 0x0101, 0x0101, 0x0101, 0x0101, 0x0101, - 0x0101, 0x0101, 0x0101, 0x0101, 0x0101, 0x0101, 0x0101, 0x0101, - 0x0101, 0x0101, 0x0101, 0x0101, 0x0101, 0x0101, 0x0101, 0x0101, - 0x0101, 0x0101, 0xff01, - 0xdbff, 0x4300, 0x0101, 0x0101, 0x0101, 0x0101, 0x0101, 0x0101, - 0x0101, 0x0101, 0x0101, 0x0101, 0x0101, 0x0101, 0x0101, 0x0101, - 0x0101, 0x0101, 0x0101, 0x0101, 0x0101, 0x0101, 0x0101, 0x0101, - 0x0101, 0x0101, 0x0101, 0x0101, 0x0101, 0x0101, 0x0101, 0x0101, - 0x0101, 0x0101, 0xff01, - } }; - - if (quality < 0 || quality > 10) { - printk(KERN_WARNING - "meye: invalid quality level %d - using 8\n", quality); - quality = 8; - } - - *length = ARRAY_SIZE(jpeg_tables[quality]); - return jpeg_tables[quality]; -} - -/* return a generic set of huffman tables */ -static u16 *jpeg_huffman_tables(int *length) -{ - static u16 tables[] = { - 0xC4FF, 0xB500, 0x0010, 0x0102, 0x0303, 0x0402, 0x0503, 0x0405, - 0x0004, 0x0100, 0x017D, 0x0302, 0x0400, 0x0511, 0x2112, 0x4131, - 0x1306, 0x6151, 0x2207, 0x1471, 0x8132, 0xA191, 0x2308, 0xB142, - 0x15C1, 0xD152, 0x24F0, 0x6233, 0x8272, 0x0A09, 0x1716, 0x1918, - 0x251A, 0x2726, 0x2928, 0x342A, 0x3635, 0x3837, 0x3A39, 0x4443, - 0x4645, 0x4847, 0x4A49, 0x5453, 0x5655, 0x5857, 0x5A59, 0x6463, - 0x6665, 0x6867, 0x6A69, 0x7473, 0x7675, 0x7877, 0x7A79, 0x8483, - 0x8685, 0x8887, 0x8A89, 0x9392, 0x9594, 0x9796, 0x9998, 0xA29A, - 0xA4A3, 0xA6A5, 0xA8A7, 0xAAA9, 0xB3B2, 0xB5B4, 0xB7B6, 0xB9B8, - 0xC2BA, 0xC4C3, 0xC6C5, 0xC8C7, 0xCAC9, 0xD3D2, 0xD5D4, 0xD7D6, - 0xD9D8, 0xE1DA, 0xE3E2, 0xE5E4, 0xE7E6, 0xE9E8, 0xF1EA, 0xF3F2, - 0xF5F4, 0xF7F6, 0xF9F8, 0xFFFA, - 0xC4FF, 0xB500, 0x0011, 0x0102, 0x0402, 0x0304, 0x0704, 0x0405, - 0x0004, 0x0201, 0x0077, 0x0201, 0x1103, 0x0504, 0x3121, 0x1206, - 0x5141, 0x6107, 0x1371, 0x3222, 0x0881, 0x4214, 0xA191, 0xC1B1, - 0x2309, 0x5233, 0x15F0, 0x7262, 0x0AD1, 0x2416, 0xE134, 0xF125, - 0x1817, 0x1A19, 0x2726, 0x2928, 0x352A, 0x3736, 0x3938, 0x433A, - 0x4544, 0x4746, 0x4948, 0x534A, 0x5554, 0x5756, 0x5958, 0x635A, - 0x6564, 0x6766, 0x6968, 0x736A, 0x7574, 0x7776, 0x7978, 0x827A, - 0x8483, 0x8685, 0x8887, 0x8A89, 0x9392, 0x9594, 0x9796, 0x9998, - 0xA29A, 0xA4A3, 0xA6A5, 0xA8A7, 0xAAA9, 0xB3B2, 0xB5B4, 0xB7B6, - 0xB9B8, 0xC2BA, 0xC4C3, 0xC6C5, 0xC8C7, 0xCAC9, 0xD3D2, 0xD5D4, - 0xD7D6, 0xD9D8, 0xE2DA, 0xE4E3, 0xE6E5, 0xE8E7, 0xEAE9, 0xF3F2, - 0xF5F4, 0xF7F6, 0xF9F8, 0xFFFA, - 0xC4FF, 0x1F00, 0x0000, 0x0501, 0x0101, 0x0101, 0x0101, 0x0000, - 0x0000, 0x0000, 0x0000, 0x0201, 0x0403, 0x0605, 0x0807, 0x0A09, - 0xFF0B, - 0xC4FF, 0x1F00, 0x0001, 0x0103, 0x0101, 0x0101, 0x0101, 0x0101, - 0x0000, 0x0000, 0x0000, 0x0201, 0x0403, 0x0605, 0x0807, 0x0A09, - 0xFF0B - }; - - *length = ARRAY_SIZE(tables); - return tables; -} - -/****************************************************************************/ -/* MCHIP low-level functions */ -/****************************************************************************/ - -/* returns the horizontal capture size */ -static inline int mchip_hsize(void) -{ - return meye.params.subsample ? 320 : 640; -} - -/* returns the vertical capture size */ -static inline int mchip_vsize(void) -{ - return meye.params.subsample ? 240 : 480; -} - -/* waits for a register to be available */ -static void mchip_sync(int reg) -{ - u32 status; - int i; - - if (reg == MCHIP_MM_FIFO_DATA) { - for (i = 0; i < MCHIP_REG_TIMEOUT; i++) { - status = readl(meye.mchip_mmregs + - MCHIP_MM_FIFO_STATUS); - if (!(status & MCHIP_MM_FIFO_WAIT)) { - printk(KERN_WARNING "meye: fifo not ready\n"); - return; - } - if (status & MCHIP_MM_FIFO_READY) - return; - udelay(1); - } - } else if (reg > 0x80) { - u32 mask = (reg < 0x100) ? MCHIP_HIC_STATUS_MCC_RDY - : MCHIP_HIC_STATUS_VRJ_RDY; - for (i = 0; i < MCHIP_REG_TIMEOUT; i++) { - status = readl(meye.mchip_mmregs + MCHIP_HIC_STATUS); - if (status & mask) - return; - udelay(1); - } - } else - return; - printk(KERN_WARNING - "meye: mchip_sync() timeout on reg 0x%x status=0x%x\n", - reg, status); -} - -/* sets a value into the register */ -static inline void mchip_set(int reg, u32 v) -{ - mchip_sync(reg); - writel(v, meye.mchip_mmregs + reg); -} - -/* get the register value */ -static inline u32 mchip_read(int reg) -{ - mchip_sync(reg); - return readl(meye.mchip_mmregs + reg); -} - -/* wait for a register to become a particular value */ -static inline int mchip_delay(u32 reg, u32 v) -{ - int n = 10; - while (--n && mchip_read(reg) != v) - udelay(1); - return n; -} - -/* setup subsampling */ -static void mchip_subsample(void) -{ - mchip_set(MCHIP_MCC_R_SAMPLING, meye.params.subsample); - mchip_set(MCHIP_MCC_R_XRANGE, mchip_hsize()); - mchip_set(MCHIP_MCC_R_YRANGE, mchip_vsize()); - mchip_set(MCHIP_MCC_B_XRANGE, mchip_hsize()); - mchip_set(MCHIP_MCC_B_YRANGE, mchip_vsize()); - mchip_delay(MCHIP_HIC_STATUS, MCHIP_HIC_STATUS_IDLE); -} - -/* set the framerate into the mchip */ -static void mchip_set_framerate(void) -{ - mchip_set(MCHIP_HIC_S_RATE, meye.params.framerate); -} - -/* load some huffman and quantisation tables into the VRJ chip ready - for JPEG compression */ -static void mchip_load_tables(void) -{ - int i; - int length; - u16 *tables; - - tables = jpeg_huffman_tables(&length); - for (i = 0; i < length; i++) - writel(tables[i], meye.mchip_mmregs + MCHIP_VRJ_TABLE_DATA); - - tables = jpeg_quantisation_tables(&length, meye.params.quality); - for (i = 0; i < length; i++) - writel(tables[i], meye.mchip_mmregs + MCHIP_VRJ_TABLE_DATA); -} - -/* setup the VRJ parameters in the chip */ -static void mchip_vrj_setup(u8 mode) -{ - mchip_set(MCHIP_VRJ_BUS_MODE, 5); - mchip_set(MCHIP_VRJ_SIGNAL_ACTIVE_LEVEL, 0x1f); - mchip_set(MCHIP_VRJ_PDAT_USE, 1); - mchip_set(MCHIP_VRJ_IRQ_FLAG, 0xa0); - mchip_set(MCHIP_VRJ_MODE_SPECIFY, mode); - mchip_set(MCHIP_VRJ_NUM_LINES, mchip_vsize()); - mchip_set(MCHIP_VRJ_NUM_PIXELS, mchip_hsize()); - mchip_set(MCHIP_VRJ_NUM_COMPONENTS, 0x1b); - mchip_set(MCHIP_VRJ_LIMIT_COMPRESSED_LO, 0xFFFF); - mchip_set(MCHIP_VRJ_LIMIT_COMPRESSED_HI, 0xFFFF); - mchip_set(MCHIP_VRJ_COMP_DATA_FORMAT, 0xC); - mchip_set(MCHIP_VRJ_RESTART_INTERVAL, 0); - mchip_set(MCHIP_VRJ_SOF1, 0x601); - mchip_set(MCHIP_VRJ_SOF2, 0x1502); - mchip_set(MCHIP_VRJ_SOF3, 0x1503); - mchip_set(MCHIP_VRJ_SOF4, 0x1596); - mchip_set(MCHIP_VRJ_SOS, 0x0ed0); - - mchip_load_tables(); -} - -/* sets the DMA parameters into the chip */ -static void mchip_dma_setup(dma_addr_t dma_addr) -{ - int i; - - mchip_set(MCHIP_MM_PT_ADDR, (u32)dma_addr); - for (i = 0; i < 4; i++) - mchip_set(MCHIP_MM_FIR(i), 0); - meye.mchip_fnum = 0; -} - -/* setup for DMA transfers - also zeros the framebuffer */ -static int mchip_dma_alloc(void) -{ - if (!meye.mchip_dmahandle) - if (ptable_alloc()) - return -1; - return 0; -} - -/* frees the DMA buffer */ -static void mchip_dma_free(void) -{ - if (meye.mchip_dmahandle) { - mchip_dma_setup(0); - ptable_free(); - } -} - -/* stop any existing HIC action and wait for any dma to complete then - reset the dma engine */ -static void mchip_hic_stop(void) -{ - int i, j; - - meye.mchip_mode = MCHIP_HIC_MODE_NOOP; - if (!(mchip_read(MCHIP_HIC_STATUS) & MCHIP_HIC_STATUS_BUSY)) - return; - for (i = 0; i < 20; ++i) { - mchip_set(MCHIP_HIC_CMD, MCHIP_HIC_CMD_STOP); - mchip_delay(MCHIP_HIC_CMD, 0); - for (j = 0; j < 100; ++j) { - if (mchip_delay(MCHIP_HIC_STATUS, - MCHIP_HIC_STATUS_IDLE)) - return; - msleep(1); - } - printk(KERN_ERR "meye: need to reset HIC!\n"); - - mchip_set(MCHIP_HIC_CTL, MCHIP_HIC_CTL_SOFT_RESET); - msleep(250); - } - printk(KERN_ERR "meye: resetting HIC hanged!\n"); -} - -/****************************************************************************/ -/* MCHIP frame processing functions */ -/****************************************************************************/ - -/* get the next ready frame from the dma engine */ -static u32 mchip_get_frame(void) -{ - return mchip_read(MCHIP_MM_FIR(meye.mchip_fnum)); -} - -/* frees the current frame from the dma engine */ -static void mchip_free_frame(void) -{ - mchip_set(MCHIP_MM_FIR(meye.mchip_fnum), 0); - meye.mchip_fnum++; - meye.mchip_fnum %= 4; -} - -/* read one frame from the framebuffer assuming it was captured using - a uncompressed transfer */ -static void mchip_cont_read_frame(u32 v, u8 *buf, int size) -{ - int pt_id; - - pt_id = (v >> 17) & 0x3FF; - - ptable_copy(buf, pt_id, size, MCHIP_NB_PAGES); -} - -/* read a compressed frame from the framebuffer */ -static int mchip_comp_read_frame(u32 v, u8 *buf, int size) -{ - int pt_start, pt_end, trailer; - int fsize; - int i; - - pt_start = (v >> 19) & 0xFF; - pt_end = (v >> 11) & 0xFF; - trailer = (v >> 1) & 0x3FF; - - if (pt_end < pt_start) - fsize = (MCHIP_NB_PAGES_MJPEG - pt_start) * PAGE_SIZE + - pt_end * PAGE_SIZE + trailer * 4; - else - fsize = (pt_end - pt_start) * PAGE_SIZE + trailer * 4; - - if (fsize > size) { - printk(KERN_WARNING "meye: oversized compressed frame %d\n", - fsize); - return -1; - } - - ptable_copy(buf, pt_start, fsize, MCHIP_NB_PAGES_MJPEG); - -#ifdef MEYE_JPEG_CORRECTION - - /* Some mchip generated jpeg frames are incorrect. In most - * (all ?) of those cases, the final EOI (0xff 0xd9) marker - * is not present at the end of the frame. - * - * Since adding the final marker is not enough to restore - * the jpeg integrity, we drop the frame. - */ - - for (i = fsize - 1; i > 0 && buf[i] == 0xff; i--) ; - - if (i < 2 || buf[i - 1] != 0xff || buf[i] != 0xd9) - return -1; - -#endif - - return fsize; -} - -/* take a picture into SDRAM */ -static void mchip_take_picture(void) -{ - int i; - - mchip_hic_stop(); - mchip_subsample(); - mchip_dma_setup(meye.mchip_dmahandle); - - mchip_set(MCHIP_HIC_MODE, MCHIP_HIC_MODE_STILL_CAP); - mchip_set(MCHIP_HIC_CMD, MCHIP_HIC_CMD_START); - - mchip_delay(MCHIP_HIC_CMD, 0); - - for (i = 0; i < 100; ++i) { - if (mchip_delay(MCHIP_HIC_STATUS, MCHIP_HIC_STATUS_IDLE)) - break; - msleep(1); - } -} - -/* dma a previously taken picture into a buffer */ -static void mchip_get_picture(u8 *buf, int bufsize) -{ - u32 v; - int i; - - mchip_set(MCHIP_HIC_MODE, MCHIP_HIC_MODE_STILL_OUT); - mchip_set(MCHIP_HIC_CMD, MCHIP_HIC_CMD_START); - - mchip_delay(MCHIP_HIC_CMD, 0); - for (i = 0; i < 100; ++i) { - if (mchip_delay(MCHIP_HIC_STATUS, MCHIP_HIC_STATUS_IDLE)) - break; - msleep(1); - } - for (i = 0; i < 4; ++i) { - v = mchip_get_frame(); - if (v & MCHIP_MM_FIR_RDY) { - mchip_cont_read_frame(v, buf, bufsize); - break; - } - mchip_free_frame(); - } -} - -/* start continuous dma capture */ -static void mchip_continuous_start(void) -{ - mchip_hic_stop(); - mchip_subsample(); - mchip_set_framerate(); - mchip_dma_setup(meye.mchip_dmahandle); - - meye.mchip_mode = MCHIP_HIC_MODE_CONT_OUT; - - mchip_set(MCHIP_HIC_MODE, MCHIP_HIC_MODE_CONT_OUT); - mchip_set(MCHIP_HIC_CMD, MCHIP_HIC_CMD_START); - - mchip_delay(MCHIP_HIC_CMD, 0); -} - -/* compress one frame into a buffer */ -static int mchip_compress_frame(u8 *buf, int bufsize) -{ - u32 v; - int len = -1, i; - - mchip_vrj_setup(0x3f); - udelay(50); - - mchip_set(MCHIP_HIC_MODE, MCHIP_HIC_MODE_STILL_COMP); - mchip_set(MCHIP_HIC_CMD, MCHIP_HIC_CMD_START); - - mchip_delay(MCHIP_HIC_CMD, 0); - for (i = 0; i < 100; ++i) { - if (mchip_delay(MCHIP_HIC_STATUS, MCHIP_HIC_STATUS_IDLE)) - break; - msleep(1); - } - - for (i = 0; i < 4; ++i) { - v = mchip_get_frame(); - if (v & MCHIP_MM_FIR_RDY) { - len = mchip_comp_read_frame(v, buf, bufsize); - break; - } - mchip_free_frame(); - } - return len; -} - -#if 0 -/* uncompress one image into a buffer */ -static int mchip_uncompress_frame(u8 *img, int imgsize, u8 *buf, int bufsize) -{ - mchip_vrj_setup(0x3f); - udelay(50); - - mchip_set(MCHIP_HIC_MODE, MCHIP_HIC_MODE_STILL_DECOMP); - mchip_set(MCHIP_HIC_CMD, MCHIP_HIC_CMD_START); - - mchip_delay(MCHIP_HIC_CMD, 0); - - return mchip_comp_read_frame(buf, bufsize); -} -#endif - -/* start continuous compressed capture */ -static void mchip_cont_compression_start(void) -{ - mchip_hic_stop(); - mchip_vrj_setup(0x3f); - mchip_subsample(); - mchip_set_framerate(); - mchip_dma_setup(meye.mchip_dmahandle); - - meye.mchip_mode = MCHIP_HIC_MODE_CONT_COMP; - - mchip_set(MCHIP_HIC_MODE, MCHIP_HIC_MODE_CONT_COMP); - mchip_set(MCHIP_HIC_CMD, MCHIP_HIC_CMD_START); - - mchip_delay(MCHIP_HIC_CMD, 0); -} - -/****************************************************************************/ -/* Interrupt handling */ -/****************************************************************************/ - -static irqreturn_t meye_irq(int irq, void *dev_id) -{ - u32 v; - int reqnr; - static int sequence; - - v = mchip_read(MCHIP_MM_INTA); - - if (meye.mchip_mode != MCHIP_HIC_MODE_CONT_OUT && - meye.mchip_mode != MCHIP_HIC_MODE_CONT_COMP) - return IRQ_NONE; - -again: - v = mchip_get_frame(); - if (!(v & MCHIP_MM_FIR_RDY)) - return IRQ_HANDLED; - - if (meye.mchip_mode == MCHIP_HIC_MODE_CONT_OUT) { - if (kfifo_out_locked(&meye.grabq, (unsigned char *)&reqnr, - sizeof(int), &meye.grabq_lock) != sizeof(int)) { - mchip_free_frame(); - return IRQ_HANDLED; - } - mchip_cont_read_frame(v, meye.grab_fbuffer + gbufsize * reqnr, - mchip_hsize() * mchip_vsize() * 2); - meye.grab_buffer[reqnr].size = mchip_hsize() * mchip_vsize() * 2; - meye.grab_buffer[reqnr].state = MEYE_BUF_DONE; - meye.grab_buffer[reqnr].ts = ktime_get_ns(); - meye.grab_buffer[reqnr].sequence = sequence++; - kfifo_in_locked(&meye.doneq, (unsigned char *)&reqnr, - sizeof(int), &meye.doneq_lock); - wake_up_interruptible(&meye.proc_list); - } else { - int size; - size = mchip_comp_read_frame(v, meye.grab_temp, gbufsize); - if (size == -1) { - mchip_free_frame(); - goto again; - } - if (kfifo_out_locked(&meye.grabq, (unsigned char *)&reqnr, - sizeof(int), &meye.grabq_lock) != sizeof(int)) { - mchip_free_frame(); - goto again; - } - memcpy(meye.grab_fbuffer + gbufsize * reqnr, meye.grab_temp, - size); - meye.grab_buffer[reqnr].size = size; - meye.grab_buffer[reqnr].state = MEYE_BUF_DONE; - meye.grab_buffer[reqnr].ts = ktime_get_ns(); - meye.grab_buffer[reqnr].sequence = sequence++; - kfifo_in_locked(&meye.doneq, (unsigned char *)&reqnr, - sizeof(int), &meye.doneq_lock); - wake_up_interruptible(&meye.proc_list); - } - mchip_free_frame(); - goto again; -} - -/****************************************************************************/ -/* video4linux integration */ -/****************************************************************************/ - -static int meye_open(struct file *file) -{ - int i; - - if (test_and_set_bit(0, &meye.in_use)) - return -EBUSY; - - mchip_hic_stop(); - - if (mchip_dma_alloc()) { - printk(KERN_ERR "meye: mchip framebuffer allocation failed\n"); - clear_bit(0, &meye.in_use); - return -ENOBUFS; - } - - for (i = 0; i < MEYE_MAX_BUFNBRS; i++) - meye.grab_buffer[i].state = MEYE_BUF_UNUSED; - kfifo_reset(&meye.grabq); - kfifo_reset(&meye.doneq); - return v4l2_fh_open(file); -} - -static int meye_release(struct file *file) -{ - mchip_hic_stop(); - mchip_dma_free(); - clear_bit(0, &meye.in_use); - return v4l2_fh_release(file); -} - -static int meyeioc_g_params(struct meye_params *p) -{ - *p = meye.params; - return 0; -} - -static int meyeioc_s_params(struct meye_params *jp) -{ - if (jp->subsample > 1) - return -EINVAL; - - if (jp->quality > 10) - return -EINVAL; - - if (jp->sharpness > 63 || jp->agc > 63 || jp->picture > 63) - return -EINVAL; - - if (jp->framerate > 31) - return -EINVAL; - - mutex_lock(&meye.lock); - - if (meye.params.subsample != jp->subsample || - meye.params.quality != jp->quality) - mchip_hic_stop(); /* need restart */ - - meye.params = *jp; - sony_pic_camera_command(SONY_PIC_COMMAND_SETCAMERASHARPNESS, - meye.params.sharpness); - sony_pic_camera_command(SONY_PIC_COMMAND_SETCAMERAAGC, - meye.params.agc); - sony_pic_camera_command(SONY_PIC_COMMAND_SETCAMERAPICTURE, - meye.params.picture); - mutex_unlock(&meye.lock); - - return 0; -} - -static int meyeioc_qbuf_capt(int *nb) -{ - if (!meye.grab_fbuffer) - return -EINVAL; - - if (*nb >= gbuffers) - return -EINVAL; - - if (*nb < 0) { - /* stop capture */ - mchip_hic_stop(); - return 0; - } - - if (meye.grab_buffer[*nb].state != MEYE_BUF_UNUSED) - return -EBUSY; - - mutex_lock(&meye.lock); - - if (meye.mchip_mode != MCHIP_HIC_MODE_CONT_COMP) - mchip_cont_compression_start(); - - meye.grab_buffer[*nb].state = MEYE_BUF_USING; - kfifo_in_locked(&meye.grabq, (unsigned char *)nb, sizeof(int), - &meye.grabq_lock); - mutex_unlock(&meye.lock); - - return 0; -} - -static int meyeioc_sync(struct file *file, void *fh, int *i) -{ - int unused; - - if (*i < 0 || *i >= gbuffers) - return -EINVAL; - - mutex_lock(&meye.lock); - switch (meye.grab_buffer[*i].state) { - - case MEYE_BUF_UNUSED: - mutex_unlock(&meye.lock); - return -EINVAL; - case MEYE_BUF_USING: - if (file->f_flags & O_NONBLOCK) { - mutex_unlock(&meye.lock); - return -EAGAIN; - } - if (wait_event_interruptible(meye.proc_list, - (meye.grab_buffer[*i].state != MEYE_BUF_USING))) { - mutex_unlock(&meye.lock); - return -EINTR; - } - fallthrough; - case MEYE_BUF_DONE: - meye.grab_buffer[*i].state = MEYE_BUF_UNUSED; - if (kfifo_out_locked(&meye.doneq, (unsigned char *)&unused, - sizeof(int), &meye.doneq_lock) != sizeof(int)) - break; - } - *i = meye.grab_buffer[*i].size; - mutex_unlock(&meye.lock); - return 0; -} - -static int meyeioc_stillcapt(void) -{ - if (!meye.grab_fbuffer) - return -EINVAL; - - if (meye.grab_buffer[0].state != MEYE_BUF_UNUSED) - return -EBUSY; - - mutex_lock(&meye.lock); - meye.grab_buffer[0].state = MEYE_BUF_USING; - mchip_take_picture(); - - mchip_get_picture(meye.grab_fbuffer, - mchip_hsize() * mchip_vsize() * 2); - - meye.grab_buffer[0].state = MEYE_BUF_DONE; - mutex_unlock(&meye.lock); - - return 0; -} - -static int meyeioc_stilljcapt(int *len) -{ - if (!meye.grab_fbuffer) - return -EINVAL; - - if (meye.grab_buffer[0].state != MEYE_BUF_UNUSED) - return -EBUSY; - - mutex_lock(&meye.lock); - meye.grab_buffer[0].state = MEYE_BUF_USING; - *len = -1; - - while (*len == -1) { - mchip_take_picture(); - *len = mchip_compress_frame(meye.grab_fbuffer, gbufsize); - } - - meye.grab_buffer[0].state = MEYE_BUF_DONE; - mutex_unlock(&meye.lock); - return 0; -} - -static int vidioc_querycap(struct file *file, void *fh, - struct v4l2_capability *cap) -{ - strscpy(cap->driver, "meye", sizeof(cap->driver)); - strscpy(cap->card, "meye", sizeof(cap->card)); - return 0; -} - -static int vidioc_enum_input(struct file *file, void *fh, struct v4l2_input *i) -{ - if (i->index != 0) - return -EINVAL; - - strscpy(i->name, "Camera", sizeof(i->name)); - i->type = V4L2_INPUT_TYPE_CAMERA; - - return 0; -} - -static int vidioc_g_input(struct file *file, void *fh, unsigned int *i) -{ - *i = 0; - return 0; -} - -static int vidioc_s_input(struct file *file, void *fh, unsigned int i) -{ - if (i != 0) - return -EINVAL; - - return 0; -} - -static int meye_s_ctrl(struct v4l2_ctrl *ctrl) -{ - mutex_lock(&meye.lock); - switch (ctrl->id) { - case V4L2_CID_BRIGHTNESS: - sony_pic_camera_command( - SONY_PIC_COMMAND_SETCAMERABRIGHTNESS, ctrl->val); - meye.brightness = ctrl->val << 10; - break; - case V4L2_CID_HUE: - sony_pic_camera_command( - SONY_PIC_COMMAND_SETCAMERAHUE, ctrl->val); - meye.hue = ctrl->val << 10; - break; - case V4L2_CID_CONTRAST: - sony_pic_camera_command( - SONY_PIC_COMMAND_SETCAMERACONTRAST, ctrl->val); - meye.contrast = ctrl->val << 10; - break; - case V4L2_CID_SATURATION: - sony_pic_camera_command( - SONY_PIC_COMMAND_SETCAMERACOLOR, ctrl->val); - meye.colour = ctrl->val << 10; - break; - case V4L2_CID_MEYE_AGC: - sony_pic_camera_command( - SONY_PIC_COMMAND_SETCAMERAAGC, ctrl->val); - meye.params.agc = ctrl->val; - break; - case V4L2_CID_SHARPNESS: - sony_pic_camera_command( - SONY_PIC_COMMAND_SETCAMERASHARPNESS, ctrl->val); - meye.params.sharpness = ctrl->val; - break; - case V4L2_CID_MEYE_PICTURE: - sony_pic_camera_command( - SONY_PIC_COMMAND_SETCAMERAPICTURE, ctrl->val); - meye.params.picture = ctrl->val; - break; - case V4L2_CID_JPEG_COMPRESSION_QUALITY: - meye.params.quality = ctrl->val; - break; - case V4L2_CID_MEYE_FRAMERATE: - meye.params.framerate = ctrl->val; - break; - default: - mutex_unlock(&meye.lock); - return -EINVAL; - } - mutex_unlock(&meye.lock); - - return 0; -} - -static int vidioc_enum_fmt_vid_cap(struct file *file, void *fh, - struct v4l2_fmtdesc *f) -{ - if (f->index > 1) - return -EINVAL; - - if (f->index == 0) { - /* standard YUV 422 capture */ - f->flags = 0; - f->pixelformat = V4L2_PIX_FMT_YUYV; - } else { - /* compressed MJPEG capture */ - f->pixelformat = V4L2_PIX_FMT_MJPEG; - } - - return 0; -} - -static int vidioc_try_fmt_vid_cap(struct file *file, void *fh, - struct v4l2_format *f) -{ - if (f->fmt.pix.pixelformat != V4L2_PIX_FMT_YUYV && - f->fmt.pix.pixelformat != V4L2_PIX_FMT_MJPEG) - return -EINVAL; - - if (f->fmt.pix.field != V4L2_FIELD_ANY && - f->fmt.pix.field != V4L2_FIELD_NONE) - return -EINVAL; - - f->fmt.pix.field = V4L2_FIELD_NONE; - - if (f->fmt.pix.width <= 320) { - f->fmt.pix.width = 320; - f->fmt.pix.height = 240; - } else { - f->fmt.pix.width = 640; - f->fmt.pix.height = 480; - } - - f->fmt.pix.bytesperline = f->fmt.pix.width * 2; - f->fmt.pix.sizeimage = f->fmt.pix.height * - f->fmt.pix.bytesperline; - f->fmt.pix.colorspace = 0; - - return 0; -} - -static int vidioc_g_fmt_vid_cap(struct file *file, void *fh, - struct v4l2_format *f) -{ - switch (meye.mchip_mode) { - case MCHIP_HIC_MODE_CONT_OUT: - default: - f->fmt.pix.pixelformat = V4L2_PIX_FMT_YUYV; - break; - case MCHIP_HIC_MODE_CONT_COMP: - f->fmt.pix.pixelformat = V4L2_PIX_FMT_MJPEG; - break; - } - - f->fmt.pix.field = V4L2_FIELD_NONE; - f->fmt.pix.width = mchip_hsize(); - f->fmt.pix.height = mchip_vsize(); - f->fmt.pix.bytesperline = f->fmt.pix.width * 2; - f->fmt.pix.sizeimage = f->fmt.pix.height * - f->fmt.pix.bytesperline; - - return 0; -} - -static int vidioc_s_fmt_vid_cap(struct file *file, void *fh, - struct v4l2_format *f) -{ - if (f->fmt.pix.pixelformat != V4L2_PIX_FMT_YUYV && - f->fmt.pix.pixelformat != V4L2_PIX_FMT_MJPEG) - return -EINVAL; - - if (f->fmt.pix.field != V4L2_FIELD_ANY && - f->fmt.pix.field != V4L2_FIELD_NONE) - return -EINVAL; - - f->fmt.pix.field = V4L2_FIELD_NONE; - mutex_lock(&meye.lock); - - if (f->fmt.pix.width <= 320) { - f->fmt.pix.width = 320; - f->fmt.pix.height = 240; - meye.params.subsample = 1; - } else { - f->fmt.pix.width = 640; - f->fmt.pix.height = 480; - meye.params.subsample = 0; - } - - switch (f->fmt.pix.pixelformat) { - case V4L2_PIX_FMT_YUYV: - meye.mchip_mode = MCHIP_HIC_MODE_CONT_OUT; - break; - case V4L2_PIX_FMT_MJPEG: - meye.mchip_mode = MCHIP_HIC_MODE_CONT_COMP; - break; - } - - mutex_unlock(&meye.lock); - f->fmt.pix.bytesperline = f->fmt.pix.width * 2; - f->fmt.pix.sizeimage = f->fmt.pix.height * - f->fmt.pix.bytesperline; - f->fmt.pix.colorspace = 0; - - return 0; -} - -static int vidioc_reqbufs(struct file *file, void *fh, - struct v4l2_requestbuffers *req) -{ - int i; - - if (req->memory != V4L2_MEMORY_MMAP) - return -EINVAL; - - if (meye.grab_fbuffer && req->count == gbuffers) { - /* already allocated, no modifications */ - return 0; - } - - mutex_lock(&meye.lock); - if (meye.grab_fbuffer) { - for (i = 0; i < gbuffers; i++) - if (meye.vma_use_count[i]) { - mutex_unlock(&meye.lock); - return -EINVAL; - } - rvfree(meye.grab_fbuffer, gbuffers * gbufsize); - meye.grab_fbuffer = NULL; - } - - gbuffers = max(2, min((int)req->count, MEYE_MAX_BUFNBRS)); - req->count = gbuffers; - meye.grab_fbuffer = rvmalloc(gbuffers * gbufsize); - - if (!meye.grab_fbuffer) { - printk(KERN_ERR "meye: v4l framebuffer allocation failed\n"); - mutex_unlock(&meye.lock); - return -ENOMEM; - } - - for (i = 0; i < gbuffers; i++) - meye.vma_use_count[i] = 0; - - mutex_unlock(&meye.lock); - - return 0; -} - -static int vidioc_querybuf(struct file *file, void *fh, struct v4l2_buffer *buf) -{ - unsigned int index = buf->index; - - if (index >= gbuffers) - return -EINVAL; - - buf->bytesused = meye.grab_buffer[index].size; - buf->flags = V4L2_BUF_FLAG_MAPPED | V4L2_BUF_FLAG_TIMESTAMP_MONOTONIC; - - if (meye.grab_buffer[index].state == MEYE_BUF_USING) - buf->flags |= V4L2_BUF_FLAG_QUEUED; - - if (meye.grab_buffer[index].state == MEYE_BUF_DONE) - buf->flags |= V4L2_BUF_FLAG_DONE; - - buf->field = V4L2_FIELD_NONE; - v4l2_buffer_set_timestamp(buf, meye.grab_buffer[index].ts); - buf->sequence = meye.grab_buffer[index].sequence; - buf->memory = V4L2_MEMORY_MMAP; - buf->m.offset = index * gbufsize; - buf->length = gbufsize; - - return 0; -} - -static int vidioc_qbuf(struct file *file, void *fh, struct v4l2_buffer *buf) -{ - if (buf->memory != V4L2_MEMORY_MMAP) - return -EINVAL; - - if (buf->index >= gbuffers) - return -EINVAL; - - if (meye.grab_buffer[buf->index].state != MEYE_BUF_UNUSED) - return -EINVAL; - - mutex_lock(&meye.lock); - buf->flags |= V4L2_BUF_FLAG_QUEUED; - buf->flags &= ~V4L2_BUF_FLAG_DONE; - meye.grab_buffer[buf->index].state = MEYE_BUF_USING; - kfifo_in_locked(&meye.grabq, (unsigned char *)&buf->index, - sizeof(int), &meye.grabq_lock); - mutex_unlock(&meye.lock); - - return 0; -} - -static int vidioc_dqbuf(struct file *file, void *fh, struct v4l2_buffer *buf) -{ - int reqnr; - - if (buf->memory != V4L2_MEMORY_MMAP) - return -EINVAL; - - mutex_lock(&meye.lock); - - if (kfifo_len(&meye.doneq) == 0 && file->f_flags & O_NONBLOCK) { - mutex_unlock(&meye.lock); - return -EAGAIN; - } - - if (wait_event_interruptible(meye.proc_list, - kfifo_len(&meye.doneq) != 0) < 0) { - mutex_unlock(&meye.lock); - return -EINTR; - } - - if (!kfifo_out_locked(&meye.doneq, (unsigned char *)&reqnr, - sizeof(int), &meye.doneq_lock)) { - mutex_unlock(&meye.lock); - return -EBUSY; - } - - if (meye.grab_buffer[reqnr].state != MEYE_BUF_DONE) { - mutex_unlock(&meye.lock); - return -EINVAL; - } - - buf->index = reqnr; - buf->bytesused = meye.grab_buffer[reqnr].size; - buf->flags = V4L2_BUF_FLAG_MAPPED | V4L2_BUF_FLAG_TIMESTAMP_MONOTONIC; - buf->field = V4L2_FIELD_NONE; - v4l2_buffer_set_timestamp(buf, meye.grab_buffer[reqnr].ts); - buf->sequence = meye.grab_buffer[reqnr].sequence; - buf->memory = V4L2_MEMORY_MMAP; - buf->m.offset = reqnr * gbufsize; - buf->length = gbufsize; - meye.grab_buffer[reqnr].state = MEYE_BUF_UNUSED; - mutex_unlock(&meye.lock); - - return 0; -} - -static int vidioc_streamon(struct file *file, void *fh, enum v4l2_buf_type i) -{ - mutex_lock(&meye.lock); - - switch (meye.mchip_mode) { - case MCHIP_HIC_MODE_CONT_OUT: - mchip_continuous_start(); - break; - case MCHIP_HIC_MODE_CONT_COMP: - mchip_cont_compression_start(); - break; - default: - mutex_unlock(&meye.lock); - return -EINVAL; - } - - mutex_unlock(&meye.lock); - - return 0; -} - -static int vidioc_streamoff(struct file *file, void *fh, enum v4l2_buf_type i) -{ - mutex_lock(&meye.lock); - mchip_hic_stop(); - kfifo_reset(&meye.grabq); - kfifo_reset(&meye.doneq); - - for (i = 0; i < MEYE_MAX_BUFNBRS; i++) - meye.grab_buffer[i].state = MEYE_BUF_UNUSED; - - mutex_unlock(&meye.lock); - return 0; -} - -static long vidioc_default(struct file *file, void *fh, bool valid_prio, - unsigned int cmd, void *arg) -{ - switch (cmd) { - case MEYEIOC_G_PARAMS: - return meyeioc_g_params((struct meye_params *) arg); - - case MEYEIOC_S_PARAMS: - return meyeioc_s_params((struct meye_params *) arg); - - case MEYEIOC_QBUF_CAPT: - return meyeioc_qbuf_capt((int *) arg); - - case MEYEIOC_SYNC: - return meyeioc_sync(file, fh, (int *) arg); - - case MEYEIOC_STILLCAPT: - return meyeioc_stillcapt(); - - case MEYEIOC_STILLJCAPT: - return meyeioc_stilljcapt((int *) arg); - - default: - return -ENOTTY; - } - -} - -static __poll_t meye_poll(struct file *file, poll_table *wait) -{ - __poll_t res = v4l2_ctrl_poll(file, wait); - - mutex_lock(&meye.lock); - poll_wait(file, &meye.proc_list, wait); - if (kfifo_len(&meye.doneq)) - res |= EPOLLIN | EPOLLRDNORM; - mutex_unlock(&meye.lock); - return res; -} - -static void meye_vm_open(struct vm_area_struct *vma) -{ - long idx = (long)vma->vm_private_data; - meye.vma_use_count[idx]++; -} - -static void meye_vm_close(struct vm_area_struct *vma) -{ - long idx = (long)vma->vm_private_data; - meye.vma_use_count[idx]--; -} - -static const struct vm_operations_struct meye_vm_ops = { - .open = meye_vm_open, - .close = meye_vm_close, -}; - -static int meye_mmap(struct file *file, struct vm_area_struct *vma) -{ - unsigned long start = vma->vm_start; - unsigned long size = vma->vm_end - vma->vm_start; - unsigned long offset = vma->vm_pgoff << PAGE_SHIFT; - unsigned long page, pos; - - mutex_lock(&meye.lock); - if (size > gbuffers * gbufsize || offset > gbuffers * gbufsize - size) { - mutex_unlock(&meye.lock); - return -EINVAL; - } - if (!meye.grab_fbuffer) { - int i; - - /* lazy allocation */ - meye.grab_fbuffer = rvmalloc(gbuffers*gbufsize); - if (!meye.grab_fbuffer) { - printk(KERN_ERR "meye: v4l framebuffer allocation failed\n"); - mutex_unlock(&meye.lock); - return -ENOMEM; - } - for (i = 0; i < gbuffers; i++) - meye.vma_use_count[i] = 0; - } - pos = (unsigned long)meye.grab_fbuffer + offset; - - while (size > 0) { - page = vmalloc_to_pfn((void *)pos); - if (remap_pfn_range(vma, start, page, PAGE_SIZE, PAGE_SHARED)) { - mutex_unlock(&meye.lock); - return -EAGAIN; - } - start += PAGE_SIZE; - pos += PAGE_SIZE; - if (size > PAGE_SIZE) - size -= PAGE_SIZE; - else - size = 0; - } - - vma->vm_ops = &meye_vm_ops; - vma->vm_flags &= ~VM_IO; /* not I/O memory */ - vma->vm_flags |= VM_DONTEXPAND | VM_DONTDUMP; - vma->vm_private_data = (void *) (offset / gbufsize); - meye_vm_open(vma); - - mutex_unlock(&meye.lock); - return 0; -} - -static const struct v4l2_file_operations meye_fops = { - .owner = THIS_MODULE, - .open = meye_open, - .release = meye_release, - .mmap = meye_mmap, - .unlocked_ioctl = video_ioctl2, - .poll = meye_poll, -}; - -static const struct v4l2_ioctl_ops meye_ioctl_ops = { - .vidioc_querycap = vidioc_querycap, - .vidioc_enum_input = vidioc_enum_input, - .vidioc_g_input = vidioc_g_input, - .vidioc_s_input = vidioc_s_input, - .vidioc_enum_fmt_vid_cap = vidioc_enum_fmt_vid_cap, - .vidioc_try_fmt_vid_cap = vidioc_try_fmt_vid_cap, - .vidioc_g_fmt_vid_cap = vidioc_g_fmt_vid_cap, - .vidioc_s_fmt_vid_cap = vidioc_s_fmt_vid_cap, - .vidioc_reqbufs = vidioc_reqbufs, - .vidioc_querybuf = vidioc_querybuf, - .vidioc_qbuf = vidioc_qbuf, - .vidioc_dqbuf = vidioc_dqbuf, - .vidioc_streamon = vidioc_streamon, - .vidioc_streamoff = vidioc_streamoff, - .vidioc_log_status = v4l2_ctrl_log_status, - .vidioc_subscribe_event = v4l2_ctrl_subscribe_event, - .vidioc_unsubscribe_event = v4l2_event_unsubscribe, - .vidioc_default = vidioc_default, -}; - -static const struct video_device meye_template = { - .name = "meye", - .fops = &meye_fops, - .ioctl_ops = &meye_ioctl_ops, - .release = video_device_release_empty, - .device_caps = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING, -}; - -static const struct v4l2_ctrl_ops meye_ctrl_ops = { - .s_ctrl = meye_s_ctrl, -}; - -static int __maybe_unused meye_suspend(struct device *dev) -{ - meye.pm_mchip_mode = meye.mchip_mode; - mchip_hic_stop(); - mchip_set(MCHIP_MM_INTA, 0x0); - return 0; -} - -static int __maybe_unused meye_resume(struct device *dev) -{ - pci_write_config_word(meye.mchip_dev, MCHIP_PCI_SOFTRESET_SET, 1); - - mchip_delay(MCHIP_HIC_CMD, 0); - mchip_delay(MCHIP_HIC_STATUS, MCHIP_HIC_STATUS_IDLE); - msleep(1); - mchip_set(MCHIP_VRJ_SOFT_RESET, 1); - msleep(1); - mchip_set(MCHIP_MM_PCI_MODE, 5); - msleep(1); - mchip_set(MCHIP_MM_INTA, MCHIP_MM_INTA_HIC_1_MASK); - - switch (meye.pm_mchip_mode) { - case MCHIP_HIC_MODE_CONT_OUT: - mchip_continuous_start(); - break; - case MCHIP_HIC_MODE_CONT_COMP: - mchip_cont_compression_start(); - break; - } - return 0; -} - -static int meye_probe(struct pci_dev *pcidev, const struct pci_device_id *ent) -{ - static const struct v4l2_ctrl_config ctrl_agc = { - .id = V4L2_CID_MEYE_AGC, - .type = V4L2_CTRL_TYPE_INTEGER, - .ops = &meye_ctrl_ops, - .name = "AGC", - .max = 63, - .step = 1, - .def = 48, - .flags = V4L2_CTRL_FLAG_SLIDER, - }; - static const struct v4l2_ctrl_config ctrl_picture = { - .id = V4L2_CID_MEYE_PICTURE, - .type = V4L2_CTRL_TYPE_INTEGER, - .ops = &meye_ctrl_ops, - .name = "Picture", - .max = 63, - .step = 1, - }; - static const struct v4l2_ctrl_config ctrl_framerate = { - .id = V4L2_CID_MEYE_FRAMERATE, - .type = V4L2_CTRL_TYPE_INTEGER, - .ops = &meye_ctrl_ops, - .name = "Framerate", - .max = 31, - .step = 1, - }; - struct v4l2_device *v4l2_dev = &meye.v4l2_dev; - int ret = -EBUSY; - unsigned long mchip_adr; - - if (meye.mchip_dev != NULL) { - printk(KERN_ERR "meye: only one device allowed!\n"); - return ret; - } - - ret = v4l2_device_register(&pcidev->dev, v4l2_dev); - if (ret < 0) { - v4l2_err(v4l2_dev, "Could not register v4l2_device\n"); - return ret; - } - ret = -ENOMEM; - meye.mchip_dev = pcidev; - - meye.grab_temp = vmalloc(array_size(PAGE_SIZE, MCHIP_NB_PAGES_MJPEG)); - if (!meye.grab_temp) - goto outvmalloc; - - spin_lock_init(&meye.grabq_lock); - if (kfifo_alloc(&meye.grabq, sizeof(int) * MEYE_MAX_BUFNBRS, - GFP_KERNEL)) - goto outkfifoalloc1; - - spin_lock_init(&meye.doneq_lock); - if (kfifo_alloc(&meye.doneq, sizeof(int) * MEYE_MAX_BUFNBRS, - GFP_KERNEL)) - goto outkfifoalloc2; - - meye.vdev = meye_template; - meye.vdev.v4l2_dev = &meye.v4l2_dev; - - ret = sony_pic_camera_command(SONY_PIC_COMMAND_SETCAMERA, 1); - if (ret) { - v4l2_err(v4l2_dev, "meye: unable to power on the camera\n"); - v4l2_err(v4l2_dev, "meye: did you enable the camera in sonypi using the module options ?\n"); - goto outsonypienable; - } - - ret = pci_enable_device(meye.mchip_dev); - if (ret) { - v4l2_err(v4l2_dev, "meye: pci_enable_device failed\n"); - goto outenabledev; - } - - ret = -EIO; - mchip_adr = pci_resource_start(meye.mchip_dev,0); - if (!mchip_adr) { - v4l2_err(v4l2_dev, "meye: mchip has no device base address\n"); - goto outregions; - } - if (!request_mem_region(pci_resource_start(meye.mchip_dev, 0), - pci_resource_len(meye.mchip_dev, 0), - "meye")) { - v4l2_err(v4l2_dev, "meye: request_mem_region failed\n"); - goto outregions; - } - meye.mchip_mmregs = ioremap(mchip_adr, MCHIP_MM_REGS); - if (!meye.mchip_mmregs) { - v4l2_err(v4l2_dev, "meye: ioremap failed\n"); - goto outremap; - } - - meye.mchip_irq = pcidev->irq; - if (request_irq(meye.mchip_irq, meye_irq, - IRQF_SHARED, "meye", meye_irq)) { - v4l2_err(v4l2_dev, "request_irq failed\n"); - goto outreqirq; - } - - pci_write_config_byte(meye.mchip_dev, PCI_CACHE_LINE_SIZE, 8); - pci_write_config_byte(meye.mchip_dev, PCI_LATENCY_TIMER, 64); - - pci_set_master(meye.mchip_dev); - - /* Ask the camera to perform a soft reset. */ - pci_write_config_word(meye.mchip_dev, MCHIP_PCI_SOFTRESET_SET, 1); - - mchip_delay(MCHIP_HIC_CMD, 0); - mchip_delay(MCHIP_HIC_STATUS, MCHIP_HIC_STATUS_IDLE); - - msleep(1); - mchip_set(MCHIP_VRJ_SOFT_RESET, 1); - - msleep(1); - mchip_set(MCHIP_MM_PCI_MODE, 5); - - msleep(1); - mchip_set(MCHIP_MM_INTA, MCHIP_MM_INTA_HIC_1_MASK); - - mutex_init(&meye.lock); - init_waitqueue_head(&meye.proc_list); - - v4l2_ctrl_handler_init(&meye.hdl, 3); - v4l2_ctrl_new_std(&meye.hdl, &meye_ctrl_ops, - V4L2_CID_BRIGHTNESS, 0, 63, 1, 32); - v4l2_ctrl_new_std(&meye.hdl, &meye_ctrl_ops, - V4L2_CID_HUE, 0, 63, 1, 32); - v4l2_ctrl_new_std(&meye.hdl, &meye_ctrl_ops, - V4L2_CID_CONTRAST, 0, 63, 1, 32); - v4l2_ctrl_new_std(&meye.hdl, &meye_ctrl_ops, - V4L2_CID_SATURATION, 0, 63, 1, 32); - v4l2_ctrl_new_custom(&meye.hdl, &ctrl_agc, NULL); - v4l2_ctrl_new_std(&meye.hdl, &meye_ctrl_ops, - V4L2_CID_SHARPNESS, 0, 63, 1, 32); - v4l2_ctrl_new_custom(&meye.hdl, &ctrl_picture, NULL); - v4l2_ctrl_new_std(&meye.hdl, &meye_ctrl_ops, - V4L2_CID_JPEG_COMPRESSION_QUALITY, 0, 10, 1, 8); - v4l2_ctrl_new_custom(&meye.hdl, &ctrl_framerate, NULL); - if (meye.hdl.error) { - v4l2_err(v4l2_dev, "couldn't register controls\n"); - goto outvideoreg; - } - - v4l2_ctrl_handler_setup(&meye.hdl); - meye.vdev.ctrl_handler = &meye.hdl; - - if (video_register_device(&meye.vdev, VFL_TYPE_VIDEO, - video_nr) < 0) { - v4l2_err(v4l2_dev, "video_register_device failed\n"); - goto outvideoreg; - } - - v4l2_info(v4l2_dev, "Motion Eye Camera Driver v%s.\n", - MEYE_DRIVER_VERSION); - v4l2_info(v4l2_dev, "mchip KL5A72002 rev. %d, base %lx, irq %d\n", - meye.mchip_dev->revision, mchip_adr, meye.mchip_irq); - - return 0; - -outvideoreg: - v4l2_ctrl_handler_free(&meye.hdl); - free_irq(meye.mchip_irq, meye_irq); -outreqirq: - iounmap(meye.mchip_mmregs); -outremap: - release_mem_region(pci_resource_start(meye.mchip_dev, 0), - pci_resource_len(meye.mchip_dev, 0)); -outregions: - pci_disable_device(meye.mchip_dev); -outenabledev: - sony_pic_camera_command(SONY_PIC_COMMAND_SETCAMERA, 0); -outsonypienable: - kfifo_free(&meye.doneq); -outkfifoalloc2: - kfifo_free(&meye.grabq); -outkfifoalloc1: - vfree(meye.grab_temp); -outvmalloc: - return ret; -} - -static void meye_remove(struct pci_dev *pcidev) -{ - video_unregister_device(&meye.vdev); - - mchip_hic_stop(); - - mchip_dma_free(); - - /* disable interrupts */ - mchip_set(MCHIP_MM_INTA, 0x0); - - free_irq(meye.mchip_irq, meye_irq); - - iounmap(meye.mchip_mmregs); - - release_mem_region(pci_resource_start(meye.mchip_dev, 0), - pci_resource_len(meye.mchip_dev, 0)); - - pci_disable_device(meye.mchip_dev); - - sony_pic_camera_command(SONY_PIC_COMMAND_SETCAMERA, 0); - - kfifo_free(&meye.doneq); - kfifo_free(&meye.grabq); - - vfree(meye.grab_temp); - - if (meye.grab_fbuffer) { - rvfree(meye.grab_fbuffer, gbuffers*gbufsize); - meye.grab_fbuffer = NULL; - } - - printk(KERN_INFO "meye: removed\n"); -} - -static const struct pci_device_id meye_pci_tbl[] = { - { PCI_VDEVICE(KAWASAKI, PCI_DEVICE_ID_MCHIP_KL5A72002), 0 }, - { } -}; - -MODULE_DEVICE_TABLE(pci, meye_pci_tbl); - -static SIMPLE_DEV_PM_OPS(meye_pm_ops, meye_suspend, meye_resume); - -static struct pci_driver meye_driver = { - .name = "meye", - .id_table = meye_pci_tbl, - .probe = meye_probe, - .remove = meye_remove, - .driver.pm = &meye_pm_ops, -}; - -static int __init meye_init(void) -{ - gbuffers = max(2, min((int)gbuffers, MEYE_MAX_BUFNBRS)); - if (gbufsize > MEYE_MAX_BUFSIZE) - gbufsize = MEYE_MAX_BUFSIZE; - gbufsize = PAGE_ALIGN(gbufsize); - printk(KERN_INFO "meye: using %d buffers with %dk (%dk total) for capture\n", - gbuffers, - gbufsize / 1024, gbuffers * gbufsize / 1024); - return pci_register_driver(&meye_driver); -} - -static void __exit meye_exit(void) -{ - pci_unregister_driver(&meye_driver); -} - -module_init(meye_init); -module_exit(meye_exit); diff --git a/drivers/staging/media/deprecated/meye/meye.h b/drivers/staging/media/deprecated/meye/meye.h deleted file mode 100644 index 5fa6552cf93d..000000000000 --- a/drivers/staging/media/deprecated/meye/meye.h +++ /dev/null @@ -1,311 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-or-later */ -/* - * Motion Eye video4linux driver for Sony Vaio PictureBook - * - * Copyright (C) 2001-2004 Stelian Pop - * - * Copyright (C) 2001-2002 Alcôve - * - * Copyright (C) 2000 Andrew Tridgell - * - * Earlier work by Werner Almesberger, Paul `Rusty' Russell and Paul Mackerras. - * - * Some parts borrowed from various video4linux drivers, especially - * bttv-driver.c and zoran.c, see original files for credits. - */ - -#ifndef _MEYE_PRIV_H_ -#define _MEYE_PRIV_H_ - -#define MEYE_DRIVER_MAJORVERSION 1 -#define MEYE_DRIVER_MINORVERSION 14 - -#define MEYE_DRIVER_VERSION __stringify(MEYE_DRIVER_MAJORVERSION) "." \ - __stringify(MEYE_DRIVER_MINORVERSION) - -#include -#include -#include -#include - -/****************************************************************************/ -/* Motion JPEG chip registers */ -/****************************************************************************/ - -/* Motion JPEG chip PCI configuration registers */ -#define MCHIP_PCI_POWER_CSR 0x54 -#define MCHIP_PCI_MCORE_STATUS 0x60 /* see HIC_STATUS */ -#define MCHIP_PCI_HOSTUSEREQ_SET 0x64 -#define MCHIP_PCI_HOSTUSEREQ_CLR 0x68 -#define MCHIP_PCI_LOWPOWER_SET 0x6c -#define MCHIP_PCI_LOWPOWER_CLR 0x70 -#define MCHIP_PCI_SOFTRESET_SET 0x74 - -/* Motion JPEG chip memory mapped registers */ -#define MCHIP_MM_REGS 0x200 /* 512 bytes */ -#define MCHIP_REG_TIMEOUT 1000 /* reg access, ~us */ -#define MCHIP_MCC_VRJ_TIMEOUT 1000 /* MCC & VRJ access */ - -#define MCHIP_MM_PCI_MODE 0x00 /* PCI access mode */ -#define MCHIP_MM_PCI_MODE_RETRY 0x00000001 /* retry mode */ -#define MCHIP_MM_PCI_MODE_MASTER 0x00000002 /* master access */ -#define MCHIP_MM_PCI_MODE_READ_LINE 0x00000004 /* read line */ - -#define MCHIP_MM_INTA 0x04 /* Int status/mask */ -#define MCHIP_MM_INTA_MCC 0x00000001 /* MCC interrupt */ -#define MCHIP_MM_INTA_VRJ 0x00000002 /* VRJ interrupt */ -#define MCHIP_MM_INTA_HIC_1 0x00000004 /* one frame done */ -#define MCHIP_MM_INTA_HIC_1_MASK 0x00000400 /* 1: enable */ -#define MCHIP_MM_INTA_HIC_END 0x00000008 /* all frames done */ -#define MCHIP_MM_INTA_HIC_END_MASK 0x00000800 -#define MCHIP_MM_INTA_JPEG 0x00000010 /* decompress. error */ -#define MCHIP_MM_INTA_JPEG_MASK 0x00001000 -#define MCHIP_MM_INTA_CAPTURE 0x00000020 /* capture end */ -#define MCHIP_MM_INTA_PCI_ERR 0x00000040 /* PCI error */ -#define MCHIP_MM_INTA_PCI_ERR_MASK 0x00004000 - -#define MCHIP_MM_PT_ADDR 0x08 /* page table address*/ - /* n*4kB */ -#define MCHIP_NB_PAGES 1024 /* pages for display */ -#define MCHIP_NB_PAGES_MJPEG 256 /* pages for mjpeg */ - -#define MCHIP_MM_FIR(n) (0x0c+(n)*4) /* Frame info 0-3 */ -#define MCHIP_MM_FIR_RDY 0x00000001 /* frame ready */ -#define MCHIP_MM_FIR_FAILFR_MASK 0xf8000000 /* # of failed frames */ -#define MCHIP_MM_FIR_FAILFR_SHIFT 27 - - /* continuous comp/decomp mode */ -#define MCHIP_MM_FIR_C_ENDL_MASK 0x000007fe /* end DW [10] */ -#define MCHIP_MM_FIR_C_ENDL_SHIFT 1 -#define MCHIP_MM_FIR_C_ENDP_MASK 0x0007f800 /* end page [8] */ -#define MCHIP_MM_FIR_C_ENDP_SHIFT 11 -#define MCHIP_MM_FIR_C_STARTP_MASK 0x07f80000 /* start page [8] */ -#define MCHIP_MM_FIR_C_STARTP_SHIFT 19 - - /* continuous picture output mode */ -#define MCHIP_MM_FIR_O_STARTP_MASK 0x7ffe0000 /* start page [10] */ -#define MCHIP_MM_FIR_O_STARTP_SHIFT 17 - -#define MCHIP_MM_FIFO_DATA 0x1c /* PCI TGT FIFO data */ -#define MCHIP_MM_FIFO_STATUS 0x20 /* PCI TGT FIFO stat */ -#define MCHIP_MM_FIFO_MASK 0x00000003 -#define MCHIP_MM_FIFO_WAIT_OR_READY 0x00000002 /* Bits common to WAIT & READY*/ -#define MCHIP_MM_FIFO_IDLE 0x0 /* HIC idle */ -#define MCHIP_MM_FIFO_IDLE1 0x1 /* idem ??? */ -#define MCHIP_MM_FIFO_WAIT 0x2 /* wait request */ -#define MCHIP_MM_FIFO_READY 0x3 /* data ready */ - -#define MCHIP_HIC_HOST_USEREQ 0x40 /* host uses MCORE */ - -#define MCHIP_HIC_TP_BUSY 0x44 /* taking picture */ - -#define MCHIP_HIC_PIC_SAVED 0x48 /* pic in SDRAM */ - -#define MCHIP_HIC_LOWPOWER 0x4c /* clock stopped */ - -#define MCHIP_HIC_CTL 0x50 /* HIC control */ -#define MCHIP_HIC_CTL_SOFT_RESET 0x00000001 /* MCORE reset */ -#define MCHIP_HIC_CTL_MCORE_RDY 0x00000002 /* MCORE ready */ - -#define MCHIP_HIC_CMD 0x54 /* HIC command */ -#define MCHIP_HIC_CMD_BITS 0x00000003 /* cmd width=[1:0]*/ -#define MCHIP_HIC_CMD_NOOP 0x0 -#define MCHIP_HIC_CMD_START 0x1 -#define MCHIP_HIC_CMD_STOP 0x2 - -#define MCHIP_HIC_MODE 0x58 -#define MCHIP_HIC_MODE_NOOP 0x0 -#define MCHIP_HIC_MODE_STILL_CAP 0x1 /* still pic capt */ -#define MCHIP_HIC_MODE_DISPLAY 0x2 /* display */ -#define MCHIP_HIC_MODE_STILL_COMP 0x3 /* still pic comp. */ -#define MCHIP_HIC_MODE_STILL_DECOMP 0x4 /* still pic decomp. */ -#define MCHIP_HIC_MODE_CONT_COMP 0x5 /* cont capt+comp */ -#define MCHIP_HIC_MODE_CONT_DECOMP 0x6 /* cont decomp+disp */ -#define MCHIP_HIC_MODE_STILL_OUT 0x7 /* still pic output */ -#define MCHIP_HIC_MODE_CONT_OUT 0x8 /* cont output */ - -#define MCHIP_HIC_STATUS 0x5c -#define MCHIP_HIC_STATUS_MCC_RDY 0x00000001 /* MCC reg acc ok */ -#define MCHIP_HIC_STATUS_VRJ_RDY 0x00000002 /* VRJ reg acc ok */ -#define MCHIP_HIC_STATUS_IDLE 0x00000003 -#define MCHIP_HIC_STATUS_CAPDIS 0x00000004 /* cap/disp in prog */ -#define MCHIP_HIC_STATUS_COMPDEC 0x00000008 /* (de)comp in prog */ -#define MCHIP_HIC_STATUS_BUSY 0x00000010 /* HIC busy */ - -#define MCHIP_HIC_S_RATE 0x60 /* MJPEG # frames */ - -#define MCHIP_HIC_PCI_VFMT 0x64 /* video format */ -#define MCHIP_HIC_PCI_VFMT_YVYU 0x00000001 /* 0: V Y' U Y */ - /* 1: Y' V Y U */ - -#define MCHIP_MCC_CMD 0x80 /* MCC commands */ -#define MCHIP_MCC_CMD_INITIAL 0x0 /* idle ? */ -#define MCHIP_MCC_CMD_IIC_START_SET 0x1 -#define MCHIP_MCC_CMD_IIC_END_SET 0x2 -#define MCHIP_MCC_CMD_FM_WRITE 0x3 /* frame memory */ -#define MCHIP_MCC_CMD_FM_READ 0x4 -#define MCHIP_MCC_CMD_FM_STOP 0x5 -#define MCHIP_MCC_CMD_CAPTURE 0x6 -#define MCHIP_MCC_CMD_DISPLAY 0x7 -#define MCHIP_MCC_CMD_END_DISP 0x8 -#define MCHIP_MCC_CMD_STILL_COMP 0x9 -#define MCHIP_MCC_CMD_STILL_DECOMP 0xa -#define MCHIP_MCC_CMD_STILL_OUTPUT 0xb -#define MCHIP_MCC_CMD_CONT_OUTPUT 0xc -#define MCHIP_MCC_CMD_CONT_COMP 0xd -#define MCHIP_MCC_CMD_CONT_DECOMP 0xe -#define MCHIP_MCC_CMD_RESET 0xf /* MCC reset */ - -#define MCHIP_MCC_IIC_WR 0x84 - -#define MCHIP_MCC_MCC_WR 0x88 - -#define MCHIP_MCC_MCC_RD 0x8c - -#define MCHIP_MCC_STATUS 0x90 -#define MCHIP_MCC_STATUS_CAPT 0x00000001 /* capturing */ -#define MCHIP_MCC_STATUS_DISP 0x00000002 /* displaying */ -#define MCHIP_MCC_STATUS_COMP 0x00000004 /* compressing */ -#define MCHIP_MCC_STATUS_DECOMP 0x00000008 /* decompressing */ -#define MCHIP_MCC_STATUS_MCC_WR 0x00000010 /* register ready */ -#define MCHIP_MCC_STATUS_MCC_RD 0x00000020 /* register ready */ -#define MCHIP_MCC_STATUS_IIC_WR 0x00000040 /* register ready */ -#define MCHIP_MCC_STATUS_OUTPUT 0x00000080 /* output in prog */ - -#define MCHIP_MCC_SIG_POLARITY 0x94 -#define MCHIP_MCC_SIG_POL_VS_H 0x00000001 /* VS active-high */ -#define MCHIP_MCC_SIG_POL_HS_H 0x00000002 /* HS active-high */ -#define MCHIP_MCC_SIG_POL_DOE_H 0x00000004 /* DOE active-high */ - -#define MCHIP_MCC_IRQ 0x98 -#define MCHIP_MCC_IRQ_CAPDIS_STRT 0x00000001 /* cap/disp started */ -#define MCHIP_MCC_IRQ_CAPDIS_STRT_MASK 0x00000010 -#define MCHIP_MCC_IRQ_CAPDIS_END 0x00000002 /* cap/disp ended */ -#define MCHIP_MCC_IRQ_CAPDIS_END_MASK 0x00000020 -#define MCHIP_MCC_IRQ_COMPDEC_STRT 0x00000004 /* (de)comp started */ -#define MCHIP_MCC_IRQ_COMPDEC_STRT_MASK 0x00000040 -#define MCHIP_MCC_IRQ_COMPDEC_END 0x00000008 /* (de)comp ended */ -#define MCHIP_MCC_IRQ_COMPDEC_END_MASK 0x00000080 - -#define MCHIP_MCC_HSTART 0x9c /* video in */ -#define MCHIP_MCC_VSTART 0xa0 -#define MCHIP_MCC_HCOUNT 0xa4 -#define MCHIP_MCC_VCOUNT 0xa8 -#define MCHIP_MCC_R_XBASE 0xac /* capt/disp */ -#define MCHIP_MCC_R_YBASE 0xb0 -#define MCHIP_MCC_R_XRANGE 0xb4 -#define MCHIP_MCC_R_YRANGE 0xb8 -#define MCHIP_MCC_B_XBASE 0xbc /* comp/decomp */ -#define MCHIP_MCC_B_YBASE 0xc0 -#define MCHIP_MCC_B_XRANGE 0xc4 -#define MCHIP_MCC_B_YRANGE 0xc8 - -#define MCHIP_MCC_R_SAMPLING 0xcc /* 1: 1:4 */ - -#define MCHIP_VRJ_CMD 0x100 /* VRJ commands */ - -/* VRJ registers (see table 12.2.4) */ -#define MCHIP_VRJ_COMPRESSED_DATA 0x1b0 -#define MCHIP_VRJ_PIXEL_DATA 0x1b8 - -#define MCHIP_VRJ_BUS_MODE 0x100 -#define MCHIP_VRJ_SIGNAL_ACTIVE_LEVEL 0x108 -#define MCHIP_VRJ_PDAT_USE 0x110 -#define MCHIP_VRJ_MODE_SPECIFY 0x118 -#define MCHIP_VRJ_LIMIT_COMPRESSED_LO 0x120 -#define MCHIP_VRJ_LIMIT_COMPRESSED_HI 0x124 -#define MCHIP_VRJ_COMP_DATA_FORMAT 0x128 -#define MCHIP_VRJ_TABLE_DATA 0x140 -#define MCHIP_VRJ_RESTART_INTERVAL 0x148 -#define MCHIP_VRJ_NUM_LINES 0x150 -#define MCHIP_VRJ_NUM_PIXELS 0x158 -#define MCHIP_VRJ_NUM_COMPONENTS 0x160 -#define MCHIP_VRJ_SOF1 0x168 -#define MCHIP_VRJ_SOF2 0x170 -#define MCHIP_VRJ_SOF3 0x178 -#define MCHIP_VRJ_SOF4 0x180 -#define MCHIP_VRJ_SOS 0x188 -#define MCHIP_VRJ_SOFT_RESET 0x190 - -#define MCHIP_VRJ_STATUS 0x1c0 -#define MCHIP_VRJ_STATUS_BUSY 0x00001 -#define MCHIP_VRJ_STATUS_COMP_ACCESS 0x00002 -#define MCHIP_VRJ_STATUS_PIXEL_ACCESS 0x00004 -#define MCHIP_VRJ_STATUS_ERROR 0x00008 - -#define MCHIP_VRJ_IRQ_FLAG 0x1c8 -#define MCHIP_VRJ_ERROR_REPORT 0x1d8 - -#define MCHIP_VRJ_START_COMMAND 0x1a0 - -/****************************************************************************/ -/* Driver definitions. */ -/****************************************************************************/ - -/* Sony Programmable I/O Controller for accessing the camera commands */ -#include - -/* private API definitions */ -#include -#include - - -/* Enable jpg software correction */ -#define MEYE_JPEG_CORRECTION 1 - -/* Maximum size of a buffer */ -#define MEYE_MAX_BUFSIZE 614400 /* 640 * 480 * 2 */ - -/* Maximum number of buffers */ -#define MEYE_MAX_BUFNBRS 32 - -/* State of a buffer */ -#define MEYE_BUF_UNUSED 0 /* not used */ -#define MEYE_BUF_USING 1 /* currently grabbing / playing */ -#define MEYE_BUF_DONE 2 /* done */ - -/* grab buffer */ -struct meye_grab_buffer { - int state; /* state of buffer */ - unsigned long size; /* size of jpg frame */ - u64 ts; /* timestamp */ - unsigned long sequence; /* sequence number */ -}; - -/* size of kfifos containing buffer indices */ -#define MEYE_QUEUE_SIZE MEYE_MAX_BUFNBRS - -/* Motion Eye device structure */ -struct meye { - struct v4l2_device v4l2_dev; /* Main v4l2_device struct */ - struct v4l2_ctrl_handler hdl; - struct pci_dev *mchip_dev; /* pci device */ - u8 mchip_irq; /* irq */ - u8 mchip_mode; /* actual mchip mode: HIC_MODE... */ - u8 mchip_fnum; /* current mchip frame number */ - unsigned char __iomem *mchip_mmregs;/* mchip: memory mapped registers */ - u8 *mchip_ptable[MCHIP_NB_PAGES];/* mchip: ptable */ - void *mchip_ptable_toc; /* mchip: ptable toc */ - dma_addr_t mchip_dmahandle; /* mchip: dma handle to ptable toc */ - unsigned char *grab_fbuffer; /* capture framebuffer */ - unsigned char *grab_temp; /* temporary buffer */ - /* list of buffers */ - struct meye_grab_buffer grab_buffer[MEYE_MAX_BUFNBRS]; - int vma_use_count[MEYE_MAX_BUFNBRS]; /* mmap count */ - struct mutex lock; /* mutex for open/mmap... */ - struct kfifo grabq; /* queue for buffers to be grabbed */ - spinlock_t grabq_lock; /* lock protecting the queue */ - struct kfifo doneq; /* queue for grabbed buffers */ - spinlock_t doneq_lock; /* lock protecting the queue */ - wait_queue_head_t proc_list; /* wait queue */ - struct video_device vdev; /* video device parameters */ - u16 brightness; - u16 hue; - u16 contrast; - u16 colour; - struct meye_params params; /* additional parameters */ - unsigned long in_use; /* set to 1 if the device is in use */ - u8 pm_mchip_mode; /* old mchip mode */ -}; - -#endif diff --git a/include/uapi/linux/meye.h b/include/uapi/linux/meye.h deleted file mode 100644 index de9e3a954f3d..000000000000 --- a/include/uapi/linux/meye.h +++ /dev/null @@ -1,65 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ WITH Linux-syscall-note */ -/* - * Motion Eye video4linux driver for Sony Vaio PictureBook - * - * Copyright (C) 2001-2003 Stelian Pop - * - * Copyright (C) 2001-2002 Alcôve - * - * Copyright (C) 2000 Andrew Tridgell - * - * Earlier work by Werner Almesberger, Paul `Rusty' Russell and Paul Mackerras. - * - * Some parts borrowed from various video4linux drivers, especially - * bttv-driver.c and zoran.c, see original files for credits. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#ifndef _MEYE_H_ -#define _MEYE_H_ - -/****************************************************************************/ -/* Private API for handling mjpeg capture / playback. */ -/****************************************************************************/ - -struct meye_params { - unsigned char subsample; - unsigned char quality; - unsigned char sharpness; - unsigned char agc; - unsigned char picture; - unsigned char framerate; -}; - -/* query the extended parameters */ -#define MEYEIOC_G_PARAMS _IOR ('v', BASE_VIDIOC_PRIVATE+0, struct meye_params) -/* set the extended parameters */ -#define MEYEIOC_S_PARAMS _IOW ('v', BASE_VIDIOC_PRIVATE+1, struct meye_params) -/* queue a buffer for mjpeg capture */ -#define MEYEIOC_QBUF_CAPT _IOW ('v', BASE_VIDIOC_PRIVATE+2, int) -/* sync a previously queued mjpeg buffer */ -#define MEYEIOC_SYNC _IOWR('v', BASE_VIDIOC_PRIVATE+3, int) -/* get a still uncompressed snapshot */ -#define MEYEIOC_STILLCAPT _IO ('v', BASE_VIDIOC_PRIVATE+4) -/* get a jpeg compressed snapshot */ -#define MEYEIOC_STILLJCAPT _IOR ('v', BASE_VIDIOC_PRIVATE+5, int) - -/* V4L2 private controls */ -#define V4L2_CID_MEYE_AGC (V4L2_CID_USER_MEYE_BASE + 0) -#define V4L2_CID_MEYE_PICTURE (V4L2_CID_USER_MEYE_BASE + 1) -#define V4L2_CID_MEYE_FRAMERATE (V4L2_CID_USER_MEYE_BASE + 2) - -#endif diff --git a/include/uapi/linux/v4l2-controls.h b/include/uapi/linux/v4l2-controls.h index b73a8ba7df6c..5e80daa4ffe0 100644 --- a/include/uapi/linux/v4l2-controls.h +++ b/include/uapi/linux/v4l2-controls.h @@ -115,9 +115,13 @@ enum v4l2_colorfx { /* USER-class private control IDs */ -/* The base for the meye driver controls. See linux/meye.h for the list - * of controls. We reserve 16 controls for this driver. */ +#ifndef __KERNEL__ +/* + * The base for the meye driver controls. This driver was removed, but + * we keep this define in case any software still uses it. + */ #define V4L2_CID_USER_MEYE_BASE (V4L2_CID_USER_BASE + 0x1000) +#endif /* The base for the bttv driver controls. * We reserve 32 controls for this driver. */ From patchwork Wed Jan 11 10:52:47 2023 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Hans Verkuil X-Patchwork-Id: 13096403 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id 4FEE3C54EBE for ; Wed, 11 Jan 2023 10:53:46 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S237634AbjAKKxV (ORCPT ); Wed, 11 Jan 2023 05:53:21 -0500 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:37174 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S238514AbjAKKxK (ORCPT ); Wed, 11 Jan 2023 05:53:10 -0500 Received: from dfw.source.kernel.org (dfw.source.kernel.org [IPv6:2604:1380:4641:c500::1]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 0FDB6117E for ; Wed, 11 Jan 2023 02:53:04 -0800 (PST) Received: from smtp.kernel.org (relay.kernel.org [52.25.139.140]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by dfw.source.kernel.org (Postfix) with ESMTPS id 5943661BBB for ; Wed, 11 Jan 2023 10:53:04 +0000 (UTC) Received: by smtp.kernel.org (Postfix) with ESMTPSA id D5FD2C433D2; Wed, 11 Jan 2023 10:53:02 +0000 (UTC) From: Hans Verkuil To: linux-media@vger.kernel.org Cc: Lad Prabhakar , Hans Verkuil Subject: [PATCH 02/13] cpia2: remove deprecated driver Date: Wed, 11 Jan 2023 11:52:47 +0100 Message-Id: <20230111105258.547471-3-hverkuil-cisco@xs4all.nl> X-Mailer: git-send-email 2.39.0 In-Reply-To: <20230111105258.547471-1-hverkuil-cisco@xs4all.nl> References: <20230111105258.547471-1-hverkuil-cisco@xs4all.nl> MIME-Version: 1.0 Precedence: bulk List-ID: X-Mailing-List: linux-media@vger.kernel.org The cpia2 driver does not use the vb2 framework for streaming video, instead it implements this in the driver. This is error prone, and nobody stepped in to convert this driver to that framework. The hardware is very old, so the decision was made to remove it altogether. Signed-off-by: Hans Verkuil --- Documentation/admin-guide/media/cpia2.rst | 145 - .../admin-guide/media/other-usb-cardlist.rst | 2 - .../admin-guide/media/usb-cardlist.rst | 1 - .../admin-guide/media/v4l-drivers.rst | 1 - .../driver-api/media/drivers/cpia2_devel.rst | 56 - .../driver-api/media/drivers/index.rst | 1 - drivers/staging/media/Kconfig | 1 - drivers/staging/media/Makefile | 1 - .../staging/media/deprecated/cpia2/Kconfig | 13 - .../staging/media/deprecated/cpia2/Makefile | 4 - drivers/staging/media/deprecated/cpia2/TODO | 6 - .../staging/media/deprecated/cpia2/cpia2.h | 475 ---- .../media/deprecated/cpia2/cpia2_core.c | 2434 ----------------- .../media/deprecated/cpia2/cpia2_registers.h | 463 ---- .../media/deprecated/cpia2/cpia2_usb.c | 966 ------- .../media/deprecated/cpia2/cpia2_v4l.c | 1226 --------- 16 files changed, 5795 deletions(-) delete mode 100644 Documentation/admin-guide/media/cpia2.rst delete mode 100644 Documentation/driver-api/media/drivers/cpia2_devel.rst delete mode 100644 drivers/staging/media/deprecated/cpia2/Kconfig delete mode 100644 drivers/staging/media/deprecated/cpia2/Makefile delete mode 100644 drivers/staging/media/deprecated/cpia2/TODO delete mode 100644 drivers/staging/media/deprecated/cpia2/cpia2.h delete mode 100644 drivers/staging/media/deprecated/cpia2/cpia2_core.c delete mode 100644 drivers/staging/media/deprecated/cpia2/cpia2_registers.h delete mode 100644 drivers/staging/media/deprecated/cpia2/cpia2_usb.c delete mode 100644 drivers/staging/media/deprecated/cpia2/cpia2_v4l.c diff --git a/Documentation/admin-guide/media/cpia2.rst b/Documentation/admin-guide/media/cpia2.rst deleted file mode 100644 index f6ffef686462..000000000000 --- a/Documentation/admin-guide/media/cpia2.rst +++ /dev/null @@ -1,145 +0,0 @@ -.. SPDX-License-Identifier: GPL-2.0 - -The cpia2 driver -================ - -Authors: Peter Pregler , -Scott J. Bertin , and -Jarl Totland for the original cpia driver, which -this one was modelled from. - -Introduction ------------- - -This is a driver for STMicroelectronics's CPiA2 (second generation -Colour Processor Interface ASIC) based cameras. This camera outputs an MJPEG -stream at up to vga size. It implements the Video4Linux interface as much as -possible. Since the V4L interface does not support compressed formats, only -an mjpeg enabled application can be used with the camera. We have modified the -gqcam application to view this stream. - -The driver is implemented as two kernel modules. The cpia2 module -contains the camera functions and the V4L interface. The cpia2_usb module -contains usb specific functions. The main reason for this was the size of the -module was getting out of hand, so I separated them. It is not likely that -there will be a parallel port version. - -Features --------- - -- Supports cameras with the Vision stv6410 (CIF) and stv6500 (VGA) cmos - sensors. I only have the vga sensor, so can't test the other. -- Image formats: VGA, QVGA, CIF, QCIF, and a number of sizes in between. - VGA and QVGA are the native image sizes for the VGA camera. CIF is done - in the coprocessor by scaling QVGA. All other sizes are done by clipping. -- Palette: YCrCb, compressed with MJPEG. -- Some compression parameters are settable. -- Sensor framerate is adjustable (up to 30 fps CIF, 15 fps VGA). -- Adjust brightness, color, contrast while streaming. -- Flicker control settable for 50 or 60 Hz mains frequency. - -Making and installing the stv672 driver modules ------------------------------------------------ - -Requirements -~~~~~~~~~~~~ - -Video4Linux must be either compiled into the kernel or -available as a module. Video4Linux2 is automatically detected and made -available at compile time. - -Setup -~~~~~ - -Use ``modprobe cpia2`` to load and ``modprobe -r cpia2`` to unload. This -may be done automatically by your distribution. - -Driver options -~~~~~~~~~~~~~~ - -.. tabularcolumns:: |p{13ex}|L| - - -============== ======================================================== -Option Description -============== ======================================================== -video_nr video device to register (0=/dev/video0, etc) - range -1 to 64. default is -1 (first available) - If you have more than 1 camera, this MUST be -1. -buffer_size Size for each frame buffer in bytes (default 68k) -num_buffers Number of frame buffers (1-32, default 3) -alternate USB Alternate (2-7, default 7) -flicker_freq Frequency for flicker reduction(50 or 60, default 60) -flicker_mode 0 to disable, or 1 to enable flicker reduction. - (default 0). This is only effective if the camera - uses a stv0672 coprocessor. -============== ======================================================== - -Setting the options -~~~~~~~~~~~~~~~~~~~ - -If you are using modules, edit /etc/modules.conf and add an options -line like this:: - - options cpia2 num_buffers=3 buffer_size=65535 - -If the driver is compiled into the kernel, at boot time specify them -like this:: - - cpia2.num_buffers=3 cpia2.buffer_size=65535 - -What buffer size should I use? -~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ - -The maximum image size depends on the alternate you choose, and the -frame rate achieved by the camera. If the compression engine is able to -keep up with the frame rate, the maximum image size is given by the table -below. - -The compression engine starts out at maximum compression, and will -increase image quality until it is close to the size in the table. As long -as the compression engine can keep up with the frame rate, after a short time -the images will all be about the size in the table, regardless of resolution. - -At low alternate settings, the compression engine may not be able to -compress the image enough and will reduce the frame rate by producing larger -images. - -The default of 68k should be good for most users. This will handle -any alternate at frame rates down to 15fps. For lower frame rates, it may -be necessary to increase the buffer size to avoid having frames dropped due -to insufficient space. - -========== ========== ======== ===== -Alternate bytes/ms 15fps 30fps -========== ========== ======== ===== - 2 128 8533 4267 - 3 384 25600 12800 - 4 640 42667 21333 - 5 768 51200 25600 - 6 896 59733 29867 - 7 1023 68200 34100 -========== ========== ======== ===== - -Table: Image size(bytes) - - -How many buffers should I use? -~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ - -For normal streaming, 3 should give the best results. With only 2, -it is possible for the camera to finish sending one image just after a -program has started reading the other. If this happens, the driver must drop -a frame. The exception to this is if you have a heavily loaded machine. In -this case use 2 buffers. You are probably not reading at the full frame rate. -If the camera can send multiple images before a read finishes, it could -overwrite the third buffer before the read finishes, leading to a corrupt -image. Single and double buffering have extra checks to avoid overwriting. - -Using the camera -~~~~~~~~~~~~~~~~ - -We are providing a modified gqcam application to view the output. In -order to avoid confusion, here it is called mview. There is also the qx5view -program which can also control the lights on the qx5 microscope. MJPEG Tools -(http://mjpeg.sourceforge.net) can also be used to record from the camera. diff --git a/Documentation/admin-guide/media/other-usb-cardlist.rst b/Documentation/admin-guide/media/other-usb-cardlist.rst index bbfdb1389c18..51ca863a8601 100644 --- a/Documentation/admin-guide/media/other-usb-cardlist.rst +++ b/Documentation/admin-guide/media/other-usb-cardlist.rst @@ -14,8 +14,6 @@ dvb-as102 nBox DVB-T Dongle 0b89:0007 dvb-as102 Sky IT Digital Key (green led) 2137:0001 b2c2-flexcop-usb Technisat/B2C2 FlexCop II/IIb/III 0af7:0101 Digital TV -cpia2 Vision's CPiA2 cameras 0553:0100, 0553:0140, - such as the Digital Blue QX5 0553:0151 go7007 WIS GO7007 MPEG encoder 1943:a250, 093b:a002, 093b:a004, 0eb1:6666, 0eb1:6668 diff --git a/Documentation/admin-guide/media/usb-cardlist.rst b/Documentation/admin-guide/media/usb-cardlist.rst index 1e96f928e0af..af05dbecde0c 100644 --- a/Documentation/admin-guide/media/usb-cardlist.rst +++ b/Documentation/admin-guide/media/usb-cardlist.rst @@ -43,7 +43,6 @@ Driver Name airspy AirSpy au0828 Auvitek AU0828 b2c2-flexcop-usb Technisat/B2C2 Air/Sky/Cable2PC USB -cpia2 CPiA2 Video For Linux cx231xx Conexant cx231xx USB video capture dvb-as102 Abilis AS102 DVB receiver dvb-ttusb-budget Technotrend/Hauppauge Nova - USB devices diff --git a/Documentation/admin-guide/media/v4l-drivers.rst b/Documentation/admin-guide/media/v4l-drivers.rst index adb5240d0407..aa5dcbae077e 100644 --- a/Documentation/admin-guide/media/v4l-drivers.rst +++ b/Documentation/admin-guide/media/v4l-drivers.rst @@ -11,7 +11,6 @@ Video4Linux (V4L) driver-specific documentation bttv cafe_ccic - cpia2 cx88 davinci-vpbe fimc diff --git a/Documentation/driver-api/media/drivers/cpia2_devel.rst b/Documentation/driver-api/media/drivers/cpia2_devel.rst deleted file mode 100644 index decaa4768c78..000000000000 --- a/Documentation/driver-api/media/drivers/cpia2_devel.rst +++ /dev/null @@ -1,56 +0,0 @@ -.. SPDX-License-Identifier: GPL-2.0 - -The cpia2 driver -================ - -Authors: Peter Pregler , -Scott J. Bertin , and -Jarl Totland for the original cpia driver, which -this one was modelled from. - - -Notes to developers -~~~~~~~~~~~~~~~~~~~ - - - This is a driver version stripped of the 2.4 back compatibility - and old MJPEG ioctl API. See cpia2.sf.net for 2.4 support. - -Programmer's overview of cpia2 driver -~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ - -Cpia2 is the second generation video coprocessor from VLSI Vision Ltd (now a -division of ST Microelectronics). There are two versions. The first is the -STV0672, which is capable of up to 30 frames per second (fps) in frame sizes -up to CIF, and 15 fps for VGA frames. The STV0676 is an improved version, -which can handle up to 30 fps VGA. Both coprocessors can be attached to two -CMOS sensors - the vvl6410 CIF sensor and the vvl6500 VGA sensor. These will -be referred to as the 410 and the 500 sensors, or the CIF and VGA sensors. - -The two chipsets operate almost identically. The core is an 8051 processor, -running two different versions of firmware. The 672 runs the VP4 video -processor code, the 676 runs VP5. There are a few differences in register -mappings for the two chips. In these cases, the symbols defined in the -header files are marked with VP4 or VP5 as part of the symbol name. - -The cameras appear externally as three sets of registers. Setting register -values is the only way to control the camera. Some settings are -interdependant, such as the sequence required to power up the camera. I will -try to make note of all of these cases. - -The register sets are called blocks. Block 0 is the system block. This -section is always powered on when the camera is plugged in. It contains -registers that control housekeeping functions such as powering up the video -processor. The video processor is the VP block. These registers control -how the video from the sensor is processed. Examples are timing registers, -user mode (vga, qvga), scaling, cropping, framerates, and so on. The last -block is the video compressor (VC). The video stream sent from the camera is -compressed as Motion JPEG (JPEGA). The VC controls all of the compression -parameters. Looking at the file cpia2_registers.h, you can get a full view -of these registers and the possible values for most of them. - -One or more registers can be set or read by sending a usb control message to -the camera. There are three modes for this. Block mode requests a number -of contiguous registers. Random mode reads or writes random registers with -a tuple structure containing address/value pairs. The repeat mode is only -used by VP4 to load a firmware patch. It contains a starting address and -a sequence of bytes to be written into a gpio port. diff --git a/Documentation/driver-api/media/drivers/index.rst b/Documentation/driver-api/media/drivers/index.rst index 32406490557c..61d64366ab51 100644 --- a/Documentation/driver-api/media/drivers/index.rst +++ b/Documentation/driver-api/media/drivers/index.rst @@ -13,7 +13,6 @@ Video4Linux (V4L) drivers :maxdepth: 5 bttv-devel - cpia2_devel cx2341x-devel cx88-devel davinci-vpbe-devel diff --git a/drivers/staging/media/Kconfig b/drivers/staging/media/Kconfig index c312fe741a30..8d6c26e48609 100644 --- a/drivers/staging/media/Kconfig +++ b/drivers/staging/media/Kconfig @@ -52,7 +52,6 @@ menuconfig STAGING_MEDIA_DEPRECATED if STAGING_MEDIA_DEPRECATED source "drivers/staging/media/deprecated/atmel/Kconfig" -source "drivers/staging/media/deprecated/cpia2/Kconfig" source "drivers/staging/media/deprecated/fsl-viu/Kconfig" source "drivers/staging/media/deprecated/saa7146/Kconfig" source "drivers/staging/media/deprecated/stkwebcam/Kconfig" diff --git a/drivers/staging/media/Makefile b/drivers/staging/media/Makefile index f61ab43625b3..1f2c00cae4db 100644 --- a/drivers/staging/media/Makefile +++ b/drivers/staging/media/Makefile @@ -1,7 +1,6 @@ # SPDX-License-Identifier: GPL-2.0 obj-$(CONFIG_VIDEO_ATMEL_ISC_BASE) += deprecated/atmel/ obj-$(CONFIG_INTEL_ATOMISP) += atomisp/ -obj-$(CONFIG_VIDEO_CPIA2) += deprecated/cpia2/ obj-$(CONFIG_VIDEO_IMX_MEDIA) += imx/ obj-$(CONFIG_VIDEO_MAX96712) += max96712/ obj-$(CONFIG_VIDEO_MESON_VDEC) += meson/vdec/ diff --git a/drivers/staging/media/deprecated/cpia2/Kconfig b/drivers/staging/media/deprecated/cpia2/Kconfig deleted file mode 100644 index ee3b25a759d4..000000000000 --- a/drivers/staging/media/deprecated/cpia2/Kconfig +++ /dev/null @@ -1,13 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0-only -config VIDEO_CPIA2 - tristate "CPiA2 Video For Linux (DEPRECATED)" - depends on USB && VIDEO_DEV - help - This is the video4linux driver for cameras based on Vision's CPiA2 - (Colour Processor Interface ASIC), such as the Digital Blue QX5 - Microscope. If you have one of these cameras, say Y here - - This driver is deprecated and is scheduled for removal by - the beginning of 2023. See the TODO file for more information. - - This driver is also available as a module (cpia2). diff --git a/drivers/staging/media/deprecated/cpia2/Makefile b/drivers/staging/media/deprecated/cpia2/Makefile deleted file mode 100644 index 05664141f4d7..000000000000 --- a/drivers/staging/media/deprecated/cpia2/Makefile +++ /dev/null @@ -1,4 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0-only -cpia2-objs := cpia2_v4l.o cpia2_usb.o cpia2_core.o - -obj-$(CONFIG_VIDEO_CPIA2) += cpia2.o diff --git a/drivers/staging/media/deprecated/cpia2/TODO b/drivers/staging/media/deprecated/cpia2/TODO deleted file mode 100644 index 92ac8718d164..000000000000 --- a/drivers/staging/media/deprecated/cpia2/TODO +++ /dev/null @@ -1,6 +0,0 @@ -The cpia2 driver does not use the vb2 framework for streaming -video, instead it implements this in the driver. - -To prevent removal of this driver early 2023 it has to be -converted to use vb2. Contact the linux-media@vger.kernel.org -mailing list if you want to do this. diff --git a/drivers/staging/media/deprecated/cpia2/cpia2.h b/drivers/staging/media/deprecated/cpia2/cpia2.h deleted file mode 100644 index 57b7f1ea68da..000000000000 --- a/drivers/staging/media/deprecated/cpia2/cpia2.h +++ /dev/null @@ -1,475 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-or-later */ -/**************************************************************************** - * - * Filename: cpia2.h - * - * Copyright 2001, STMicrolectronics, Inc. - * - * Contact: steve.miller@st.com - * - * Description: - * This is a USB driver for CPiA2 based video cameras. - * - * This driver is modelled on the cpia usb driver by - * Jochen Scharrlach and Johannes Erdfeldt. - * - ****************************************************************************/ - -#ifndef __CPIA2_H__ -#define __CPIA2_H__ - -#include -#include -#include -#include -#include -#include - -#include "cpia2_registers.h" - -/* define for verbose debug output */ -//#define _CPIA2_DEBUG_ - -/*** - * Image defines - ***/ - -/* Misc constants */ -#define ALLOW_CORRUPT 0 /* Causes collater to discard checksum */ - -/* USB Transfer mode */ -#define XFER_ISOC 0 -#define XFER_BULK 1 - -/* USB Alternates */ -#define USBIF_CMDONLY 0 -#define USBIF_BULK 1 -#define USBIF_ISO_1 2 /* 128 bytes/ms */ -#define USBIF_ISO_2 3 /* 384 bytes/ms */ -#define USBIF_ISO_3 4 /* 640 bytes/ms */ -#define USBIF_ISO_4 5 /* 768 bytes/ms */ -#define USBIF_ISO_5 6 /* 896 bytes/ms */ -#define USBIF_ISO_6 7 /* 1023 bytes/ms */ - -/* Flicker Modes */ -#define NEVER_FLICKER 0 -#define FLICKER_60 60 -#define FLICKER_50 50 - -/* Debug flags */ -#define DEBUG_NONE 0 -#define DEBUG_REG 0x00000001 -#define DEBUG_DUMP_PATCH 0x00000002 -#define DEBUG_DUMP_REGS 0x00000004 - -/*** - * Video frame sizes - ***/ -enum { - VIDEOSIZE_VGA = 0, /* 640x480 */ - VIDEOSIZE_CIF, /* 352x288 */ - VIDEOSIZE_QVGA, /* 320x240 */ - VIDEOSIZE_QCIF, /* 176x144 */ - VIDEOSIZE_288_216, - VIDEOSIZE_256_192, - VIDEOSIZE_224_168, - VIDEOSIZE_192_144, -}; - -#define STV_IMAGE_CIF_ROWS 288 -#define STV_IMAGE_CIF_COLS 352 - -#define STV_IMAGE_QCIF_ROWS 144 -#define STV_IMAGE_QCIF_COLS 176 - -#define STV_IMAGE_VGA_ROWS 480 -#define STV_IMAGE_VGA_COLS 640 - -#define STV_IMAGE_QVGA_ROWS 240 -#define STV_IMAGE_QVGA_COLS 320 - -#define JPEG_MARKER_COM (1<<6) /* Comment segment */ - -/*** - * Enums - ***/ -/* Sensor types available with cpia2 asics */ -enum sensors { - CPIA2_SENSOR_410, - CPIA2_SENSOR_500 -}; - -/* Asic types available in the CPiA2 architecture */ -#define CPIA2_ASIC_672 0x67 - -/* Device types (stv672, stv676, etc) */ -#define DEVICE_STV_672 0x0001 -#define DEVICE_STV_676 0x0002 - -enum frame_status { - FRAME_EMPTY, - FRAME_READING, /* In the process of being grabbed into */ - FRAME_READY, /* Ready to be read */ - FRAME_ERROR, -}; - -/*** - * Register access (for USB request byte) - ***/ -enum { - CAMERAACCESS_SYSTEM = 0, - CAMERAACCESS_VC, - CAMERAACCESS_VP, - CAMERAACCESS_IDATA -}; - -#define CAMERAACCESS_TYPE_BLOCK 0x00 -#define CAMERAACCESS_TYPE_RANDOM 0x04 -#define CAMERAACCESS_TYPE_MASK 0x08 -#define CAMERAACCESS_TYPE_REPEAT 0x0C - -#define TRANSFER_READ 0 -#define TRANSFER_WRITE 1 - -#define DEFAULT_ALT USBIF_ISO_6 -#define DEFAULT_BRIGHTNESS 0x46 -#define DEFAULT_CONTRAST 0x93 -#define DEFAULT_SATURATION 0x7f - -/* Power state */ -#define HI_POWER_MODE CPIA2_SYSTEM_CONTROL_HIGH_POWER -#define LO_POWER_MODE CPIA2_SYSTEM_CONTROL_LOW_POWER - - -/******** - * Commands - *******/ -enum { - CPIA2_CMD_NONE = 0, - CPIA2_CMD_GET_VERSION, - CPIA2_CMD_GET_PNP_ID, - CPIA2_CMD_GET_ASIC_TYPE, - CPIA2_CMD_GET_SENSOR, - CPIA2_CMD_GET_VP_DEVICE, - CPIA2_CMD_GET_VP_BRIGHTNESS, - CPIA2_CMD_SET_VP_BRIGHTNESS, - CPIA2_CMD_GET_CONTRAST, - CPIA2_CMD_SET_CONTRAST, - CPIA2_CMD_GET_VP_SATURATION, - CPIA2_CMD_SET_VP_SATURATION, - CPIA2_CMD_GET_VP_GPIO_DIRECTION, - CPIA2_CMD_SET_VP_GPIO_DIRECTION, - CPIA2_CMD_GET_VP_GPIO_DATA, - CPIA2_CMD_SET_VP_GPIO_DATA, - CPIA2_CMD_GET_VC_MP_GPIO_DIRECTION, - CPIA2_CMD_SET_VC_MP_GPIO_DIRECTION, - CPIA2_CMD_GET_VC_MP_GPIO_DATA, - CPIA2_CMD_SET_VC_MP_GPIO_DATA, - CPIA2_CMD_ENABLE_PACKET_CTRL, - CPIA2_CMD_GET_FLICKER_MODES, - CPIA2_CMD_SET_FLICKER_MODES, - CPIA2_CMD_RESET_FIFO, /* clear fifo and enable stream block */ - CPIA2_CMD_SET_HI_POWER, - CPIA2_CMD_SET_LOW_POWER, - CPIA2_CMD_CLEAR_V2W_ERR, - CPIA2_CMD_SET_USER_MODE, - CPIA2_CMD_GET_USER_MODE, - CPIA2_CMD_FRAMERATE_REQ, - CPIA2_CMD_SET_COMPRESSION_STATE, - CPIA2_CMD_GET_WAKEUP, - CPIA2_CMD_SET_WAKEUP, - CPIA2_CMD_GET_PW_CONTROL, - CPIA2_CMD_SET_PW_CONTROL, - CPIA2_CMD_GET_SYSTEM_CTRL, - CPIA2_CMD_SET_SYSTEM_CTRL, - CPIA2_CMD_GET_VP_SYSTEM_STATE, - CPIA2_CMD_GET_VP_SYSTEM_CTRL, - CPIA2_CMD_SET_VP_SYSTEM_CTRL, - CPIA2_CMD_GET_VP_EXP_MODES, - CPIA2_CMD_SET_VP_EXP_MODES, - CPIA2_CMD_GET_DEVICE_CONFIG, - CPIA2_CMD_SET_DEVICE_CONFIG, - CPIA2_CMD_SET_SERIAL_ADDR, - CPIA2_CMD_SET_SENSOR_CR1, - CPIA2_CMD_GET_VC_CONTROL, - CPIA2_CMD_SET_VC_CONTROL, - CPIA2_CMD_SET_TARGET_KB, - CPIA2_CMD_SET_DEF_JPEG_OPT, - CPIA2_CMD_REHASH_VP4, - CPIA2_CMD_GET_USER_EFFECTS, - CPIA2_CMD_SET_USER_EFFECTS -}; - -enum user_cmd { - COMMAND_NONE = 0x00000001, - COMMAND_SET_FPS = 0x00000002, - COMMAND_SET_COLOR_PARAMS = 0x00000004, - COMMAND_GET_COLOR_PARAMS = 0x00000008, - COMMAND_SET_FORMAT = 0x00000010, /* size, etc */ - COMMAND_SET_FLICKER = 0x00000020 -}; - -/*** - * Some defines specific to the 676 chip - ***/ -#define CAMACC_CIF 0x01 -#define CAMACC_VGA 0x02 -#define CAMACC_QCIF 0x04 -#define CAMACC_QVGA 0x08 - - -struct cpia2_register { - u8 index; - u8 value; -}; - -struct cpia2_reg_mask { - u8 index; - u8 and_mask; - u8 or_mask; - u8 fill; -}; - -struct cpia2_command { - u32 command; - u8 req_mode; /* (Block or random) | registerBank */ - u8 reg_count; - u8 direction; - u8 start; - union reg_types { - struct cpia2_register registers[32]; - struct cpia2_reg_mask masks[16]; - u8 block_data[64]; - u8 *patch_data; /* points to function defined block */ - } buffer; -}; - -struct camera_params { - struct { - u8 firmware_revision_hi; /* For system register set (bank 0) */ - u8 firmware_revision_lo; - u8 asic_id; /* Video Compressor set (bank 1) */ - u8 asic_rev; - u8 vp_device_hi; /* Video Processor set (bank 2) */ - u8 vp_device_lo; - u8 sensor_flags; - u8 sensor_rev; - } version; - - struct { - u32 device_type; /* enumerated from vendor/product ids. - * Currently, either STV_672 or STV_676 */ - u16 vendor; - u16 product; - u16 device_revision; - } pnp_id; - - struct { - u8 brightness; /* CPIA2_VP_EXPOSURE_TARGET */ - u8 contrast; /* Note: this is CPIA2_VP_YRANGE */ - u8 saturation; /* CPIA2_VP_SATURATION */ - } color_params; - - struct { - u8 cam_register; - u8 flicker_mode_req; /* 1 if flicker on, else never flicker */ - } flicker_control; - - struct { - u8 jpeg_options; - u8 creep_period; - u8 user_squeeze; - u8 inhibit_htables; - } compression; - - struct { - u8 ohsize; /* output image size */ - u8 ovsize; - u8 hcrop; /* cropping start_pos/4 */ - u8 vcrop; - u8 hphase; /* scaling registers */ - u8 vphase; - u8 hispan; - u8 vispan; - u8 hicrop; - u8 vicrop; - u8 hifraction; - u8 vifraction; - } image_size; - - struct { - int width; /* actual window width */ - int height; /* actual window height */ - } roi; - - struct { - u8 video_mode; - u8 frame_rate; - u8 video_size; /* Not a register, just a convenience for cropped sizes */ - u8 gpio_direction; - u8 gpio_data; - u8 system_ctrl; - u8 system_state; - u8 lowlight_boost; /* Bool: 0 = off, 1 = on */ - u8 device_config; - u8 exposure_modes; - u8 user_effects; - } vp_params; - - struct { - u8 pw_control; - u8 wakeup; - u8 vc_control; - u8 vc_mp_direction; - u8 vc_mp_data; - u8 quality; - } vc_params; - - struct { - u8 power_mode; - u8 system_ctrl; - u8 stream_mode; /* This is the current alternate for usb drivers */ - u8 allow_corrupt; - } camera_state; -}; - -#define NUM_SBUF 2 - -struct cpia2_sbuf { - char *data; - struct urb *urb; -}; - -struct framebuf { - u64 ts; - unsigned long seq; - int num; - int length; - int max_length; - volatile enum frame_status status; - u8 *data; - struct framebuf *next; -}; - -struct camera_data { - /* locks */ - struct v4l2_device v4l2_dev; - struct mutex v4l2_lock; /* serialize file operations */ - struct v4l2_ctrl_handler hdl; - struct { - /* Lights control cluster */ - struct v4l2_ctrl *top_light; - struct v4l2_ctrl *bottom_light; - }; - struct v4l2_ctrl *usb_alt; - - /* camera status */ - int first_image_seen; - enum sensors sensor_type; - u8 flush; - struct v4l2_fh *stream_fh; - u8 mmapped; - int streaming; /* 0 = no, 1 = yes */ - int xfer_mode; /* XFER_BULK or XFER_ISOC */ - struct camera_params params; /* camera settings */ - - /* v4l */ - int video_size; /* VIDEO_SIZE_ */ - struct video_device vdev; /* v4l videodev */ - u32 width; - u32 height; /* Its size */ - __u32 pixelformat; /* Format fourcc */ - - /* USB */ - struct usb_device *dev; - unsigned char iface; - unsigned int cur_alt; - unsigned int old_alt; - struct cpia2_sbuf sbuf[NUM_SBUF]; /* Double buffering */ - - wait_queue_head_t wq_stream; - - /* Buffering */ - u32 frame_size; - int num_frames; - unsigned long frame_count; - u8 *frame_buffer; /* frame buffer data */ - struct framebuf *buffers; - struct framebuf * volatile curbuff; - struct framebuf *workbuff; - - /* MJPEG Extension */ - int APPn; /* Number of APP segment to be written, must be 0..15 */ - int APP_len; /* Length of data in JPEG APPn segment */ - char APP_data[60]; /* Data in the JPEG APPn segment. */ - - int COM_len; /* Length of data in JPEG COM segment */ - char COM_data[60]; /* Data in JPEG COM segment */ -}; - -/* v4l */ -int cpia2_register_camera(struct camera_data *cam); -void cpia2_unregister_camera(struct camera_data *cam); -void cpia2_camera_release(struct v4l2_device *v4l2_dev); - -/* core */ -int cpia2_reset_camera(struct camera_data *cam); -int cpia2_set_low_power(struct camera_data *cam); -void cpia2_dbg_dump_registers(struct camera_data *cam); -int cpia2_match_video_size(int width, int height); -void cpia2_set_camera_state(struct camera_data *cam); -void cpia2_save_camera_state(struct camera_data *cam); -void cpia2_set_color_params(struct camera_data *cam); -void cpia2_set_brightness(struct camera_data *cam, unsigned char value); -void cpia2_set_contrast(struct camera_data *cam, unsigned char value); -void cpia2_set_saturation(struct camera_data *cam, unsigned char value); -int cpia2_set_flicker_mode(struct camera_data *cam, int mode); -void cpia2_set_format(struct camera_data *cam); -int cpia2_send_command(struct camera_data *cam, struct cpia2_command *cmd); -int cpia2_do_command(struct camera_data *cam, - unsigned int command, - unsigned char direction, unsigned char param); -void cpia2_deinit_camera_struct(struct camera_data *cam, struct usb_interface *intf); -struct camera_data *cpia2_init_camera_struct(struct usb_interface *intf); -int cpia2_init_camera(struct camera_data *cam); -int cpia2_allocate_buffers(struct camera_data *cam); -void cpia2_free_buffers(struct camera_data *cam); -long cpia2_read(struct camera_data *cam, - char __user *buf, unsigned long count, int noblock); -__poll_t cpia2_poll(struct camera_data *cam, - struct file *filp, poll_table *wait); -int cpia2_remap_buffer(struct camera_data *cam, struct vm_area_struct *vma); -void cpia2_set_property_flip(struct camera_data *cam, int prop_val); -void cpia2_set_property_mirror(struct camera_data *cam, int prop_val); -int cpia2_set_gpio(struct camera_data *cam, unsigned char setting); -int cpia2_set_fps(struct camera_data *cam, int framerate); - -/* usb */ -int cpia2_usb_init(void); -void cpia2_usb_cleanup(void); -int cpia2_usb_transfer_cmd(struct camera_data *cam, void *registers, - u8 request, u8 start, u8 count, u8 direction); -int cpia2_usb_stream_start(struct camera_data *cam, unsigned int alternate); -int cpia2_usb_stream_stop(struct camera_data *cam); -int cpia2_usb_stream_pause(struct camera_data *cam); -int cpia2_usb_stream_resume(struct camera_data *cam); -int cpia2_usb_change_streaming_alternate(struct camera_data *cam, - unsigned int alt); - - -/* ----------------------- debug functions ---------------------- */ -#ifdef _CPIA2_DEBUG_ -#define ALOG(lev, fmt, args...) printk(lev "%s:%d %s(): " fmt, __FILE__, __LINE__, __func__, ## args) -#define LOG(fmt, args...) ALOG(KERN_INFO, fmt, ## args) -#define ERR(fmt, args...) ALOG(KERN_ERR, fmt, ## args) -#define DBG(fmt, args...) ALOG(KERN_DEBUG, fmt, ## args) -#else -#define ALOG(fmt,args...) printk(fmt,##args) -#define LOG(fmt,args...) ALOG(KERN_INFO "cpia2: "fmt,##args) -#define ERR(fmt,args...) ALOG(KERN_ERR "cpia2: "fmt,##args) -#define DBG(fmn,args...) do {} while(0) -#endif -/* No function or lineno, for shorter lines */ -#define KINFO(fmt, args...) printk(KERN_INFO fmt,##args) - -#endif diff --git a/drivers/staging/media/deprecated/cpia2/cpia2_core.c b/drivers/staging/media/deprecated/cpia2/cpia2_core.c deleted file mode 100644 index b5a2d06fb356..000000000000 --- a/drivers/staging/media/deprecated/cpia2/cpia2_core.c +++ /dev/null @@ -1,2434 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/**************************************************************************** - * - * Filename: cpia2_core.c - * - * Copyright 2001, STMicrolectronics, Inc. - * Contact: steve.miller@st.com - * - * Description: - * This is a USB driver for CPia2 based video cameras. - * The infrastructure of this driver is based on the cpia usb driver by - * Jochen Scharrlach and Johannes Erdfeldt. - * - * Stripped of 2.4 stuff ready for main kernel submit by - * Alan Cox - * - ****************************************************************************/ - -#include "cpia2.h" - -#include -#include -#include -#include -#include -#include - -#define FIRMWARE "cpia2/stv0672_vp4.bin" -MODULE_FIRMWARE(FIRMWARE); - -/* #define _CPIA2_DEBUG_ */ - -#ifdef _CPIA2_DEBUG_ - -static const char *block_name[] = { - "System", - "VC", - "VP", - "IDATA" -}; -#endif - -static unsigned int debugs_on; /* default 0 - DEBUG_REG */ - - -/****************************************************************************** - * - * Forward Declarations - * - *****************************************************************************/ -static int apply_vp_patch(struct camera_data *cam); -static int set_default_user_mode(struct camera_data *cam); -static int set_vw_size(struct camera_data *cam, int size); -static int configure_sensor(struct camera_data *cam, - int reqwidth, int reqheight); -static int config_sensor_410(struct camera_data *cam, - int reqwidth, int reqheight); -static int config_sensor_500(struct camera_data *cam, - int reqwidth, int reqheight); -static int set_all_properties(struct camera_data *cam); -static void wake_system(struct camera_data *cam); -static void set_lowlight_boost(struct camera_data *cam); -static void reset_camera_struct(struct camera_data *cam); -static int cpia2_set_high_power(struct camera_data *cam); - -/* Here we want the physical address of the memory. - * This is used when initializing the contents of the - * area and marking the pages as reserved. - */ -static inline unsigned long kvirt_to_pa(unsigned long adr) -{ - unsigned long kva, ret; - - kva = (unsigned long) page_address(vmalloc_to_page((void *)adr)); - kva |= adr & (PAGE_SIZE-1); /* restore the offset */ - ret = __pa(kva); - return ret; -} - -static void *rvmalloc(unsigned long size) -{ - void *mem; - unsigned long adr; - - /* Round it off to PAGE_SIZE */ - size = PAGE_ALIGN(size); - - mem = vmalloc_32(size); - if (!mem) - return NULL; - - memset(mem, 0, size); /* Clear the ram out, no junk to the user */ - adr = (unsigned long) mem; - - while ((long)size > 0) { - SetPageReserved(vmalloc_to_page((void *)adr)); - adr += PAGE_SIZE; - size -= PAGE_SIZE; - } - return mem; -} - -static void rvfree(void *mem, unsigned long size) -{ - unsigned long adr; - - if (!mem) - return; - - size = PAGE_ALIGN(size); - - adr = (unsigned long) mem; - while ((long)size > 0) { - ClearPageReserved(vmalloc_to_page((void *)adr)); - adr += PAGE_SIZE; - size -= PAGE_SIZE; - } - vfree(mem); -} - -/****************************************************************************** - * - * cpia2_do_command - * - * Send an arbitrary command to the camera. For commands that read from - * the camera, copy the buffers into the proper param structures. - *****************************************************************************/ -int cpia2_do_command(struct camera_data *cam, - u32 command, u8 direction, u8 param) -{ - int retval = 0; - struct cpia2_command cmd; - unsigned int device = cam->params.pnp_id.device_type; - - cmd.command = command; - cmd.reg_count = 2; /* default */ - cmd.direction = direction; - - /*** - * Set up the command. - ***/ - switch (command) { - case CPIA2_CMD_GET_VERSION: - cmd.req_mode = - CAMERAACCESS_TYPE_BLOCK | CAMERAACCESS_SYSTEM; - cmd.start = CPIA2_SYSTEM_DEVICE_HI; - break; - case CPIA2_CMD_GET_PNP_ID: - cmd.req_mode = - CAMERAACCESS_TYPE_BLOCK | CAMERAACCESS_SYSTEM; - cmd.reg_count = 8; - cmd.start = CPIA2_SYSTEM_DESCRIP_VID_HI; - break; - case CPIA2_CMD_GET_ASIC_TYPE: - cmd.req_mode = CAMERAACCESS_TYPE_BLOCK | CAMERAACCESS_VC; - cmd.start = CPIA2_VC_ASIC_ID; - break; - case CPIA2_CMD_GET_SENSOR: - cmd.req_mode = CAMERAACCESS_TYPE_BLOCK | CAMERAACCESS_VP; - cmd.start = CPIA2_VP_SENSOR_FLAGS; - break; - case CPIA2_CMD_GET_VP_DEVICE: - cmd.req_mode = CAMERAACCESS_TYPE_BLOCK | CAMERAACCESS_VP; - cmd.start = CPIA2_VP_DEVICEH; - break; - case CPIA2_CMD_SET_VP_BRIGHTNESS: - cmd.buffer.block_data[0] = param; - fallthrough; - case CPIA2_CMD_GET_VP_BRIGHTNESS: - cmd.req_mode = CAMERAACCESS_TYPE_BLOCK | CAMERAACCESS_VP; - cmd.reg_count = 1; - if (device == DEVICE_STV_672) - cmd.start = CPIA2_VP4_EXPOSURE_TARGET; - else - cmd.start = CPIA2_VP5_EXPOSURE_TARGET; - break; - case CPIA2_CMD_SET_CONTRAST: - cmd.buffer.block_data[0] = param; - fallthrough; - case CPIA2_CMD_GET_CONTRAST: - cmd.req_mode = CAMERAACCESS_TYPE_BLOCK | CAMERAACCESS_VP; - cmd.reg_count = 1; - cmd.start = CPIA2_VP_YRANGE; - break; - case CPIA2_CMD_SET_VP_SATURATION: - cmd.buffer.block_data[0] = param; - fallthrough; - case CPIA2_CMD_GET_VP_SATURATION: - cmd.req_mode = CAMERAACCESS_TYPE_BLOCK | CAMERAACCESS_VP; - cmd.reg_count = 1; - if (device == DEVICE_STV_672) - cmd.start = CPIA2_VP_SATURATION; - else - cmd.start = CPIA2_VP5_MCUVSATURATION; - break; - case CPIA2_CMD_SET_VP_GPIO_DATA: - cmd.buffer.block_data[0] = param; - fallthrough; - case CPIA2_CMD_GET_VP_GPIO_DATA: - cmd.req_mode = CAMERAACCESS_TYPE_BLOCK | CAMERAACCESS_VP; - cmd.reg_count = 1; - cmd.start = CPIA2_VP_GPIO_DATA; - break; - case CPIA2_CMD_SET_VP_GPIO_DIRECTION: - cmd.buffer.block_data[0] = param; - fallthrough; - case CPIA2_CMD_GET_VP_GPIO_DIRECTION: - cmd.req_mode = CAMERAACCESS_TYPE_BLOCK | CAMERAACCESS_VP; - cmd.reg_count = 1; - cmd.start = CPIA2_VP_GPIO_DIRECTION; - break; - case CPIA2_CMD_SET_VC_MP_GPIO_DATA: - cmd.buffer.block_data[0] = param; - fallthrough; - case CPIA2_CMD_GET_VC_MP_GPIO_DATA: - cmd.req_mode = CAMERAACCESS_TYPE_BLOCK | CAMERAACCESS_VC; - cmd.reg_count = 1; - cmd.start = CPIA2_VC_MP_DATA; - break; - case CPIA2_CMD_SET_VC_MP_GPIO_DIRECTION: - cmd.buffer.block_data[0] = param; - fallthrough; - case CPIA2_CMD_GET_VC_MP_GPIO_DIRECTION: - cmd.req_mode = CAMERAACCESS_TYPE_BLOCK | CAMERAACCESS_VC; - cmd.reg_count = 1; - cmd.start = CPIA2_VC_MP_DIR; - break; - case CPIA2_CMD_ENABLE_PACKET_CTRL: - cmd.req_mode = - CAMERAACCESS_TYPE_BLOCK | CAMERAACCESS_SYSTEM; - cmd.start = CPIA2_SYSTEM_INT_PACKET_CTRL; - cmd.reg_count = 1; - cmd.buffer.block_data[0] = param; - break; - case CPIA2_CMD_SET_FLICKER_MODES: - cmd.buffer.block_data[0] = param; - fallthrough; - case CPIA2_CMD_GET_FLICKER_MODES: - cmd.req_mode = CAMERAACCESS_TYPE_BLOCK | CAMERAACCESS_VP; - cmd.reg_count = 1; - cmd.start = CPIA2_VP_FLICKER_MODES; - break; - case CPIA2_CMD_RESET_FIFO: /* clear fifo and enable stream block */ - cmd.req_mode = CAMERAACCESS_TYPE_RANDOM | CAMERAACCESS_VC; - cmd.reg_count = 2; - cmd.start = 0; - cmd.buffer.registers[0].index = CPIA2_VC_ST_CTRL; - cmd.buffer.registers[0].value = CPIA2_VC_ST_CTRL_SRC_VC | - CPIA2_VC_ST_CTRL_DST_USB | CPIA2_VC_ST_CTRL_EOF_DETECT; - cmd.buffer.registers[1].index = CPIA2_VC_ST_CTRL; - cmd.buffer.registers[1].value = CPIA2_VC_ST_CTRL_SRC_VC | - CPIA2_VC_ST_CTRL_DST_USB | - CPIA2_VC_ST_CTRL_EOF_DETECT | - CPIA2_VC_ST_CTRL_FIFO_ENABLE; - break; - case CPIA2_CMD_SET_HI_POWER: - cmd.req_mode = - CAMERAACCESS_TYPE_RANDOM | CAMERAACCESS_SYSTEM; - cmd.reg_count = 2; - cmd.buffer.registers[0].index = - CPIA2_SYSTEM_SYSTEM_CONTROL; - cmd.buffer.registers[1].index = - CPIA2_SYSTEM_SYSTEM_CONTROL; - cmd.buffer.registers[0].value = CPIA2_SYSTEM_CONTROL_CLEAR_ERR; - cmd.buffer.registers[1].value = - CPIA2_SYSTEM_CONTROL_HIGH_POWER; - break; - case CPIA2_CMD_SET_LOW_POWER: - cmd.req_mode = - CAMERAACCESS_TYPE_BLOCK | CAMERAACCESS_SYSTEM; - cmd.reg_count = 1; - cmd.start = CPIA2_SYSTEM_SYSTEM_CONTROL; - cmd.buffer.block_data[0] = 0; - break; - case CPIA2_CMD_CLEAR_V2W_ERR: - cmd.req_mode = - CAMERAACCESS_TYPE_BLOCK | CAMERAACCESS_SYSTEM; - cmd.reg_count = 1; - cmd.start = CPIA2_SYSTEM_SYSTEM_CONTROL; - cmd.buffer.block_data[0] = CPIA2_SYSTEM_CONTROL_CLEAR_ERR; - break; - case CPIA2_CMD_SET_USER_MODE: - cmd.buffer.block_data[0] = param; - fallthrough; - case CPIA2_CMD_GET_USER_MODE: - cmd.req_mode = CAMERAACCESS_TYPE_BLOCK | CAMERAACCESS_VP; - cmd.reg_count = 1; - if (device == DEVICE_STV_672) - cmd.start = CPIA2_VP4_USER_MODE; - else - cmd.start = CPIA2_VP5_USER_MODE; - break; - case CPIA2_CMD_FRAMERATE_REQ: - cmd.req_mode = CAMERAACCESS_TYPE_BLOCK | CAMERAACCESS_VP; - cmd.reg_count = 1; - if (device == DEVICE_STV_672) - cmd.start = CPIA2_VP4_FRAMERATE_REQUEST; - else - cmd.start = CPIA2_VP5_FRAMERATE_REQUEST; - cmd.buffer.block_data[0] = param; - break; - case CPIA2_CMD_SET_WAKEUP: - cmd.buffer.block_data[0] = param; - fallthrough; - case CPIA2_CMD_GET_WAKEUP: - cmd.req_mode = CAMERAACCESS_TYPE_BLOCK | CAMERAACCESS_VC; - cmd.reg_count = 1; - cmd.start = CPIA2_VC_WAKEUP; - break; - case CPIA2_CMD_SET_PW_CONTROL: - cmd.buffer.block_data[0] = param; - fallthrough; - case CPIA2_CMD_GET_PW_CONTROL: - cmd.req_mode = CAMERAACCESS_TYPE_BLOCK | CAMERAACCESS_VC; - cmd.reg_count = 1; - cmd.start = CPIA2_VC_PW_CTRL; - break; - case CPIA2_CMD_GET_VP_SYSTEM_STATE: - cmd.req_mode = CAMERAACCESS_TYPE_BLOCK | CAMERAACCESS_VP; - cmd.reg_count = 1; - cmd.start = CPIA2_VP_SYSTEMSTATE; - break; - case CPIA2_CMD_SET_SYSTEM_CTRL: - cmd.buffer.block_data[0] = param; - fallthrough; - case CPIA2_CMD_GET_SYSTEM_CTRL: - cmd.req_mode = - CAMERAACCESS_TYPE_BLOCK | CAMERAACCESS_SYSTEM; - cmd.reg_count = 1; - cmd.start = CPIA2_SYSTEM_SYSTEM_CONTROL; - break; - case CPIA2_CMD_SET_VP_SYSTEM_CTRL: - cmd.buffer.block_data[0] = param; - fallthrough; - case CPIA2_CMD_GET_VP_SYSTEM_CTRL: - cmd.req_mode = CAMERAACCESS_TYPE_BLOCK | CAMERAACCESS_VP; - cmd.reg_count = 1; - cmd.start = CPIA2_VP_SYSTEMCTRL; - break; - case CPIA2_CMD_SET_VP_EXP_MODES: - cmd.buffer.block_data[0] = param; - fallthrough; - case CPIA2_CMD_GET_VP_EXP_MODES: - cmd.req_mode = CAMERAACCESS_TYPE_BLOCK | CAMERAACCESS_VP; - cmd.reg_count = 1; - cmd.start = CPIA2_VP_EXPOSURE_MODES; - break; - case CPIA2_CMD_SET_DEVICE_CONFIG: - cmd.buffer.block_data[0] = param; - fallthrough; - case CPIA2_CMD_GET_DEVICE_CONFIG: - cmd.req_mode = CAMERAACCESS_TYPE_BLOCK | CAMERAACCESS_VP; - cmd.reg_count = 1; - cmd.start = CPIA2_VP_DEVICE_CONFIG; - break; - case CPIA2_CMD_SET_SERIAL_ADDR: - cmd.buffer.block_data[0] = param; - cmd.req_mode = - CAMERAACCESS_TYPE_BLOCK | CAMERAACCESS_SYSTEM; - cmd.reg_count = 1; - cmd.start = CPIA2_SYSTEM_VP_SERIAL_ADDR; - break; - case CPIA2_CMD_SET_SENSOR_CR1: - cmd.buffer.block_data[0] = param; - cmd.req_mode = CAMERAACCESS_TYPE_BLOCK | CAMERAACCESS_VP; - cmd.reg_count = 1; - cmd.start = CPIA2_SENSOR_CR1; - break; - case CPIA2_CMD_SET_VC_CONTROL: - cmd.buffer.block_data[0] = param; - fallthrough; - case CPIA2_CMD_GET_VC_CONTROL: - cmd.req_mode = CAMERAACCESS_TYPE_BLOCK | CAMERAACCESS_VC; - cmd.reg_count = 1; - cmd.start = CPIA2_VC_VC_CTRL; - break; - case CPIA2_CMD_SET_TARGET_KB: - cmd.req_mode = CAMERAACCESS_TYPE_RANDOM | CAMERAACCESS_VC; - cmd.reg_count = 1; - cmd.buffer.registers[0].index = CPIA2_VC_VC_TARGET_KB; - cmd.buffer.registers[0].value = param; - break; - case CPIA2_CMD_SET_DEF_JPEG_OPT: - cmd.req_mode = CAMERAACCESS_TYPE_RANDOM | CAMERAACCESS_VC; - cmd.reg_count = 4; - cmd.buffer.registers[0].index = CPIA2_VC_VC_JPEG_OPT; - cmd.buffer.registers[0].value = - CPIA2_VC_VC_JPEG_OPT_DOUBLE_SQUEEZE; - cmd.buffer.registers[1].index = CPIA2_VC_VC_USER_SQUEEZE; - cmd.buffer.registers[1].value = 20; - cmd.buffer.registers[2].index = CPIA2_VC_VC_CREEP_PERIOD; - cmd.buffer.registers[2].value = 2; - cmd.buffer.registers[3].index = CPIA2_VC_VC_JPEG_OPT; - cmd.buffer.registers[3].value = CPIA2_VC_VC_JPEG_OPT_DEFAULT; - break; - case CPIA2_CMD_REHASH_VP4: - cmd.req_mode = CAMERAACCESS_TYPE_BLOCK | CAMERAACCESS_VP; - cmd.reg_count = 1; - cmd.start = CPIA2_VP_REHASH_VALUES; - cmd.buffer.block_data[0] = param; - break; - case CPIA2_CMD_SET_USER_EFFECTS: /* Note: Be careful with this as - this register can also affect - flicker modes */ - cmd.buffer.block_data[0] = param; - fallthrough; - case CPIA2_CMD_GET_USER_EFFECTS: - cmd.req_mode = CAMERAACCESS_TYPE_BLOCK | CAMERAACCESS_VP; - cmd.reg_count = 1; - if (device == DEVICE_STV_672) - cmd.start = CPIA2_VP4_USER_EFFECTS; - else - cmd.start = CPIA2_VP5_USER_EFFECTS; - break; - default: - LOG("DoCommand received invalid command\n"); - return -EINVAL; - } - - retval = cpia2_send_command(cam, &cmd); - if (retval) { - return retval; - } - - /*** - * Now copy any results from a read into the appropriate param struct. - ***/ - switch (command) { - case CPIA2_CMD_GET_VERSION: - cam->params.version.firmware_revision_hi = - cmd.buffer.block_data[0]; - cam->params.version.firmware_revision_lo = - cmd.buffer.block_data[1]; - break; - case CPIA2_CMD_GET_PNP_ID: - cam->params.pnp_id.vendor = (cmd.buffer.block_data[0] << 8) | - cmd.buffer.block_data[1]; - cam->params.pnp_id.product = (cmd.buffer.block_data[2] << 8) | - cmd.buffer.block_data[3]; - cam->params.pnp_id.device_revision = - (cmd.buffer.block_data[4] << 8) | - cmd.buffer.block_data[5]; - if (cam->params.pnp_id.vendor == 0x553) { - if (cam->params.pnp_id.product == 0x100) { - cam->params.pnp_id.device_type = DEVICE_STV_672; - } else if (cam->params.pnp_id.product == 0x140 || - cam->params.pnp_id.product == 0x151) { - cam->params.pnp_id.device_type = DEVICE_STV_676; - } - } - break; - case CPIA2_CMD_GET_ASIC_TYPE: - cam->params.version.asic_id = cmd.buffer.block_data[0]; - cam->params.version.asic_rev = cmd.buffer.block_data[1]; - break; - case CPIA2_CMD_GET_SENSOR: - cam->params.version.sensor_flags = cmd.buffer.block_data[0]; - cam->params.version.sensor_rev = cmd.buffer.block_data[1]; - break; - case CPIA2_CMD_GET_VP_DEVICE: - cam->params.version.vp_device_hi = cmd.buffer.block_data[0]; - cam->params.version.vp_device_lo = cmd.buffer.block_data[1]; - break; - case CPIA2_CMD_GET_VP_GPIO_DATA: - cam->params.vp_params.gpio_data = cmd.buffer.block_data[0]; - break; - case CPIA2_CMD_GET_VP_GPIO_DIRECTION: - cam->params.vp_params.gpio_direction = cmd.buffer.block_data[0]; - break; - case CPIA2_CMD_GET_VC_MP_GPIO_DIRECTION: - cam->params.vc_params.vc_mp_direction =cmd.buffer.block_data[0]; - break; - case CPIA2_CMD_GET_VC_MP_GPIO_DATA: - cam->params.vc_params.vc_mp_data = cmd.buffer.block_data[0]; - break; - case CPIA2_CMD_GET_FLICKER_MODES: - cam->params.flicker_control.cam_register = - cmd.buffer.block_data[0]; - break; - case CPIA2_CMD_GET_WAKEUP: - cam->params.vc_params.wakeup = cmd.buffer.block_data[0]; - break; - case CPIA2_CMD_GET_PW_CONTROL: - cam->params.vc_params.pw_control = cmd.buffer.block_data[0]; - break; - case CPIA2_CMD_GET_SYSTEM_CTRL: - cam->params.camera_state.system_ctrl = cmd.buffer.block_data[0]; - break; - case CPIA2_CMD_GET_VP_SYSTEM_STATE: - cam->params.vp_params.system_state = cmd.buffer.block_data[0]; - break; - case CPIA2_CMD_GET_VP_SYSTEM_CTRL: - cam->params.vp_params.system_ctrl = cmd.buffer.block_data[0]; - break; - case CPIA2_CMD_GET_VP_EXP_MODES: - cam->params.vp_params.exposure_modes = cmd.buffer.block_data[0]; - break; - case CPIA2_CMD_GET_DEVICE_CONFIG: - cam->params.vp_params.device_config = cmd.buffer.block_data[0]; - break; - case CPIA2_CMD_GET_VC_CONTROL: - cam->params.vc_params.vc_control = cmd.buffer.block_data[0]; - break; - case CPIA2_CMD_GET_USER_MODE: - cam->params.vp_params.video_mode = cmd.buffer.block_data[0]; - break; - case CPIA2_CMD_GET_USER_EFFECTS: - cam->params.vp_params.user_effects = cmd.buffer.block_data[0]; - break; - default: - break; - } - return retval; -} - -/****************************************************************************** - * - * cpia2_send_command - * - *****************************************************************************/ - -#define DIR(cmd) ((cmd->direction == TRANSFER_WRITE) ? "Write" : "Read") -#define BINDEX(cmd) (cmd->req_mode & 0x03) - -int cpia2_send_command(struct camera_data *cam, struct cpia2_command *cmd) -{ - u8 count; - u8 start; - u8 *buffer; - int retval; - - switch (cmd->req_mode & 0x0c) { - case CAMERAACCESS_TYPE_RANDOM: - count = cmd->reg_count * sizeof(struct cpia2_register); - start = 0; - buffer = (u8 *) & cmd->buffer; - if (debugs_on & DEBUG_REG) - DBG("%s Random: Register block %s\n", DIR(cmd), - block_name[BINDEX(cmd)]); - break; - case CAMERAACCESS_TYPE_BLOCK: - count = cmd->reg_count; - start = cmd->start; - buffer = cmd->buffer.block_data; - if (debugs_on & DEBUG_REG) - DBG("%s Block: Register block %s\n", DIR(cmd), - block_name[BINDEX(cmd)]); - break; - case CAMERAACCESS_TYPE_MASK: - count = cmd->reg_count * sizeof(struct cpia2_reg_mask); - start = 0; - buffer = (u8 *) & cmd->buffer; - if (debugs_on & DEBUG_REG) - DBG("%s Mask: Register block %s\n", DIR(cmd), - block_name[BINDEX(cmd)]); - break; - case CAMERAACCESS_TYPE_REPEAT: /* For patch blocks only */ - count = cmd->reg_count; - start = cmd->start; - buffer = cmd->buffer.block_data; - if (debugs_on & DEBUG_REG) - DBG("%s Repeat: Register block %s\n", DIR(cmd), - block_name[BINDEX(cmd)]); - break; - default: - LOG("%s: invalid request mode\n",__func__); - return -EINVAL; - } - - retval = cpia2_usb_transfer_cmd(cam, - buffer, - cmd->req_mode, - start, count, cmd->direction); -#ifdef _CPIA2_DEBUG_ - if (debugs_on & DEBUG_REG) { - int i; - for (i = 0; i < cmd->reg_count; i++) { - if((cmd->req_mode & 0x0c) == CAMERAACCESS_TYPE_BLOCK) - KINFO("%s Block: [0x%02X] = 0x%02X\n", - DIR(cmd), start + i, buffer[i]); - if((cmd->req_mode & 0x0c) == CAMERAACCESS_TYPE_RANDOM) - KINFO("%s Random: [0x%02X] = 0x%02X\n", - DIR(cmd), cmd->buffer.registers[i].index, - cmd->buffer.registers[i].value); - } - } -#endif - - return retval; -}; - -/************* - * Functions to implement camera functionality - *************/ -/****************************************************************************** - * - * cpia2_get_version_info - * - *****************************************************************************/ -static void cpia2_get_version_info(struct camera_data *cam) -{ - cpia2_do_command(cam, CPIA2_CMD_GET_VERSION, TRANSFER_READ, 0); - cpia2_do_command(cam, CPIA2_CMD_GET_PNP_ID, TRANSFER_READ, 0); - cpia2_do_command(cam, CPIA2_CMD_GET_ASIC_TYPE, TRANSFER_READ, 0); - cpia2_do_command(cam, CPIA2_CMD_GET_SENSOR, TRANSFER_READ, 0); - cpia2_do_command(cam, CPIA2_CMD_GET_VP_DEVICE, TRANSFER_READ, 0); -} - -/****************************************************************************** - * - * cpia2_reset_camera - * - * Called at least during the open process, sets up initial params. - *****************************************************************************/ -int cpia2_reset_camera(struct camera_data *cam) -{ - u8 tmp_reg; - int retval = 0; - int target_kb; - int i; - struct cpia2_command cmd; - - /*** - * VC setup - ***/ - retval = configure_sensor(cam, - cam->params.roi.width, - cam->params.roi.height); - if (retval < 0) { - ERR("Couldn't configure sensor, error=%d\n", retval); - return retval; - } - - /* Clear FIFO and route/enable stream block */ - cmd.req_mode = CAMERAACCESS_TYPE_RANDOM | CAMERAACCESS_VC; - cmd.direction = TRANSFER_WRITE; - cmd.reg_count = 2; - cmd.buffer.registers[0].index = CPIA2_VC_ST_CTRL; - cmd.buffer.registers[0].value = CPIA2_VC_ST_CTRL_SRC_VC | - CPIA2_VC_ST_CTRL_DST_USB | CPIA2_VC_ST_CTRL_EOF_DETECT; - cmd.buffer.registers[1].index = CPIA2_VC_ST_CTRL; - cmd.buffer.registers[1].value = CPIA2_VC_ST_CTRL_SRC_VC | - CPIA2_VC_ST_CTRL_DST_USB | - CPIA2_VC_ST_CTRL_EOF_DETECT | CPIA2_VC_ST_CTRL_FIFO_ENABLE; - - cpia2_send_command(cam, &cmd); - - cpia2_set_high_power(cam); - - if (cam->params.pnp_id.device_type == DEVICE_STV_672) { - /* Enable button notification */ - cmd.req_mode = CAMERAACCESS_TYPE_RANDOM | CAMERAACCESS_SYSTEM; - cmd.buffer.registers[0].index = CPIA2_SYSTEM_INT_PACKET_CTRL; - cmd.buffer.registers[0].value = - CPIA2_SYSTEM_INT_PACKET_CTRL_ENABLE_SW_XX; - cmd.reg_count = 1; - cpia2_send_command(cam, &cmd); - } - - schedule_timeout_interruptible(msecs_to_jiffies(100)); - - if (cam->params.pnp_id.device_type == DEVICE_STV_672) - retval = apply_vp_patch(cam); - - /* wait for vp to go to sleep */ - schedule_timeout_interruptible(msecs_to_jiffies(100)); - - /*** - * If this is a 676, apply VP5 fixes before we start streaming - ***/ - if (cam->params.pnp_id.device_type == DEVICE_STV_676) { - cmd.req_mode = CAMERAACCESS_TYPE_RANDOM | CAMERAACCESS_VP; - - /* The following writes improve the picture */ - cmd.buffer.registers[0].index = CPIA2_VP5_MYBLACK_LEVEL; - cmd.buffer.registers[0].value = 0; /* reduce from the default - * rec 601 pedestal of 16 */ - cmd.buffer.registers[1].index = CPIA2_VP5_MCYRANGE; - cmd.buffer.registers[1].value = 0x92; /* increase from 100% to - * (256/256 - 31) to fill - * available range */ - cmd.buffer.registers[2].index = CPIA2_VP5_MYCEILING; - cmd.buffer.registers[2].value = 0xFF; /* Increase from the - * default rec 601 ceiling - * of 240 */ - cmd.buffer.registers[3].index = CPIA2_VP5_MCUVSATURATION; - cmd.buffer.registers[3].value = 0xFF; /* Increase from the rec - * 601 100% level (128) - * to 145-192 */ - cmd.buffer.registers[4].index = CPIA2_VP5_ANTIFLKRSETUP; - cmd.buffer.registers[4].value = 0x80; /* Inhibit the - * anti-flicker */ - - /* The following 4 writes are a fix to allow QVGA to work at 30 fps */ - cmd.buffer.registers[5].index = CPIA2_VP_RAM_ADDR_H; - cmd.buffer.registers[5].value = 0x01; - cmd.buffer.registers[6].index = CPIA2_VP_RAM_ADDR_L; - cmd.buffer.registers[6].value = 0xE3; - cmd.buffer.registers[7].index = CPIA2_VP_RAM_DATA; - cmd.buffer.registers[7].value = 0x02; - cmd.buffer.registers[8].index = CPIA2_VP_RAM_DATA; - cmd.buffer.registers[8].value = 0xFC; - - cmd.direction = TRANSFER_WRITE; - cmd.reg_count = 9; - - cpia2_send_command(cam, &cmd); - } - - /* Activate all settings and start the data stream */ - /* Set user mode */ - set_default_user_mode(cam); - - /* Give VP time to wake up */ - schedule_timeout_interruptible(msecs_to_jiffies(100)); - - set_all_properties(cam); - - cpia2_do_command(cam, CPIA2_CMD_GET_USER_MODE, TRANSFER_READ, 0); - DBG("After SetAllProperties(cam), user mode is 0x%0X\n", - cam->params.vp_params.video_mode); - - /*** - * Set audio regulator off. This and the code to set the compresison - * state are too complex to form a CPIA2_CMD_, and seem to be somewhat - * intertwined. This stuff came straight from the windows driver. - ***/ - /* Turn AutoExposure off in VP and enable the serial bridge to the sensor */ - cpia2_do_command(cam, CPIA2_CMD_GET_VP_SYSTEM_CTRL, TRANSFER_READ, 0); - tmp_reg = cam->params.vp_params.system_ctrl; - cmd.buffer.registers[0].value = tmp_reg & - (tmp_reg & (CPIA2_VP_SYSTEMCTRL_HK_CONTROL ^ 0xFF)); - - cpia2_do_command(cam, CPIA2_CMD_GET_DEVICE_CONFIG, TRANSFER_READ, 0); - cmd.buffer.registers[1].value = cam->params.vp_params.device_config | - CPIA2_VP_DEVICE_CONFIG_SERIAL_BRIDGE; - cmd.buffer.registers[0].index = CPIA2_VP_SYSTEMCTRL; - cmd.buffer.registers[1].index = CPIA2_VP_DEVICE_CONFIG; - cmd.req_mode = CAMERAACCESS_TYPE_RANDOM | CAMERAACCESS_VP; - cmd.reg_count = 2; - cmd.direction = TRANSFER_WRITE; - cmd.start = 0; - cpia2_send_command(cam, &cmd); - - /* Set the correct I2C address in the CPiA-2 system register */ - cpia2_do_command(cam, - CPIA2_CMD_SET_SERIAL_ADDR, - TRANSFER_WRITE, - CPIA2_SYSTEM_VP_SERIAL_ADDR_SENSOR); - - /* Now have sensor access - set bit to turn the audio regulator off */ - cpia2_do_command(cam, - CPIA2_CMD_SET_SENSOR_CR1, - TRANSFER_WRITE, CPIA2_SENSOR_CR1_DOWN_AUDIO_REGULATOR); - - /* Set the correct I2C address in the CPiA-2 system register */ - if (cam->params.pnp_id.device_type == DEVICE_STV_672) - cpia2_do_command(cam, - CPIA2_CMD_SET_SERIAL_ADDR, - TRANSFER_WRITE, - CPIA2_SYSTEM_VP_SERIAL_ADDR_VP); // 0x88 - else - cpia2_do_command(cam, - CPIA2_CMD_SET_SERIAL_ADDR, - TRANSFER_WRITE, - CPIA2_SYSTEM_VP_SERIAL_ADDR_676_VP); // 0x8a - - /* increase signal drive strength */ - if (cam->params.pnp_id.device_type == DEVICE_STV_676) - cpia2_do_command(cam, - CPIA2_CMD_SET_VP_EXP_MODES, - TRANSFER_WRITE, - CPIA2_VP_EXPOSURE_MODES_COMPILE_EXP); - - /* Start autoexposure */ - cpia2_do_command(cam, CPIA2_CMD_GET_DEVICE_CONFIG, TRANSFER_READ, 0); - cmd.buffer.registers[0].value = cam->params.vp_params.device_config & - (CPIA2_VP_DEVICE_CONFIG_SERIAL_BRIDGE ^ 0xFF); - - cpia2_do_command(cam, CPIA2_CMD_GET_VP_SYSTEM_CTRL, TRANSFER_READ, 0); - cmd.buffer.registers[1].value = - cam->params.vp_params.system_ctrl | CPIA2_VP_SYSTEMCTRL_HK_CONTROL; - - cmd.buffer.registers[0].index = CPIA2_VP_DEVICE_CONFIG; - cmd.buffer.registers[1].index = CPIA2_VP_SYSTEMCTRL; - cmd.req_mode = CAMERAACCESS_TYPE_RANDOM | CAMERAACCESS_VP; - cmd.reg_count = 2; - cmd.direction = TRANSFER_WRITE; - - cpia2_send_command(cam, &cmd); - - /* Set compression state */ - cpia2_do_command(cam, CPIA2_CMD_GET_VC_CONTROL, TRANSFER_READ, 0); - if (cam->params.compression.inhibit_htables) { - tmp_reg = cam->params.vc_params.vc_control | - CPIA2_VC_VC_CTRL_INHIBIT_H_TABLES; - } else { - tmp_reg = cam->params.vc_params.vc_control & - ~CPIA2_VC_VC_CTRL_INHIBIT_H_TABLES; - } - cpia2_do_command(cam, CPIA2_CMD_SET_VC_CONTROL, TRANSFER_WRITE,tmp_reg); - - /* Set target size (kb) on vc - This is a heuristic based on the quality parameter and the raw - framesize in kB divided by 16 (the compression factor when the - quality is 100%) */ - target_kb = (cam->width * cam->height * 2 / 16384) * - cam->params.vc_params.quality / 100; - if (target_kb < 1) - target_kb = 1; - cpia2_do_command(cam, CPIA2_CMD_SET_TARGET_KB, - TRANSFER_WRITE, target_kb); - - /* Wiggle VC Reset */ - /*** - * First read and wait a bit. - ***/ - for (i = 0; i < 50; i++) { - cpia2_do_command(cam, CPIA2_CMD_GET_PW_CONTROL, - TRANSFER_READ, 0); - } - - tmp_reg = cam->params.vc_params.pw_control; - tmp_reg &= ~CPIA2_VC_PW_CTRL_VC_RESET_N; - - cpia2_do_command(cam, CPIA2_CMD_SET_PW_CONTROL, TRANSFER_WRITE,tmp_reg); - - tmp_reg |= CPIA2_VC_PW_CTRL_VC_RESET_N; - cpia2_do_command(cam, CPIA2_CMD_SET_PW_CONTROL, TRANSFER_WRITE,tmp_reg); - - cpia2_do_command(cam, CPIA2_CMD_SET_DEF_JPEG_OPT, TRANSFER_WRITE, 0); - - cpia2_do_command(cam, CPIA2_CMD_GET_USER_MODE, TRANSFER_READ, 0); - DBG("After VC RESET, user mode is 0x%0X\n", - cam->params.vp_params.video_mode); - - return retval; -} - -/****************************************************************************** - * - * cpia2_set_high_power - * - *****************************************************************************/ -static int cpia2_set_high_power(struct camera_data *cam) -{ - int i; - for (i = 0; i <= 50; i++) { - /* Read system status */ - cpia2_do_command(cam,CPIA2_CMD_GET_SYSTEM_CTRL,TRANSFER_READ,0); - - /* If there is an error, clear it */ - if(cam->params.camera_state.system_ctrl & - CPIA2_SYSTEM_CONTROL_V2W_ERR) - cpia2_do_command(cam, CPIA2_CMD_CLEAR_V2W_ERR, - TRANSFER_WRITE, 0); - - /* Try to set high power mode */ - cpia2_do_command(cam, CPIA2_CMD_SET_SYSTEM_CTRL, - TRANSFER_WRITE, 1); - - /* Try to read something in VP to check if everything is awake */ - cpia2_do_command(cam, CPIA2_CMD_GET_VP_SYSTEM_STATE, - TRANSFER_READ, 0); - if (cam->params.vp_params.system_state & - CPIA2_VP_SYSTEMSTATE_HK_ALIVE) { - break; - } else if (i == 50) { - cam->params.camera_state.power_mode = LO_POWER_MODE; - ERR("Camera did not wake up\n"); - return -EIO; - } - } - - DBG("System now in high power state\n"); - cam->params.camera_state.power_mode = HI_POWER_MODE; - return 0; -} - -/****************************************************************************** - * - * cpia2_set_low_power - * - *****************************************************************************/ -int cpia2_set_low_power(struct camera_data *cam) -{ - cam->params.camera_state.power_mode = LO_POWER_MODE; - cpia2_do_command(cam, CPIA2_CMD_SET_SYSTEM_CTRL, TRANSFER_WRITE, 0); - return 0; -} - -/****************************************************************************** - * - * apply_vp_patch - * - *****************************************************************************/ -static int cpia2_send_onebyte_command(struct camera_data *cam, - struct cpia2_command *cmd, - u8 start, u8 datum) -{ - cmd->buffer.block_data[0] = datum; - cmd->start = start; - cmd->reg_count = 1; - return cpia2_send_command(cam, cmd); -} - -static int apply_vp_patch(struct camera_data *cam) -{ - const struct firmware *fw; - const char fw_name[] = FIRMWARE; - int i, ret; - struct cpia2_command cmd; - - ret = request_firmware(&fw, fw_name, &cam->dev->dev); - if (ret) { - printk(KERN_ERR "cpia2: failed to load VP patch \"%s\"\n", - fw_name); - return ret; - } - - cmd.req_mode = CAMERAACCESS_TYPE_REPEAT | CAMERAACCESS_VP; - cmd.direction = TRANSFER_WRITE; - - /* First send the start address... */ - cpia2_send_onebyte_command(cam, &cmd, 0x0A, fw->data[0]); /* hi */ - cpia2_send_onebyte_command(cam, &cmd, 0x0B, fw->data[1]); /* lo */ - - /* ... followed by the data payload */ - for (i = 2; i < fw->size; i += 64) { - cmd.start = 0x0C; /* Data */ - cmd.reg_count = min_t(uint, 64, fw->size - i); - memcpy(cmd.buffer.block_data, &fw->data[i], cmd.reg_count); - cpia2_send_command(cam, &cmd); - } - - /* Next send the start address... */ - cpia2_send_onebyte_command(cam, &cmd, 0x0A, fw->data[0]); /* hi */ - cpia2_send_onebyte_command(cam, &cmd, 0x0B, fw->data[1]); /* lo */ - - /* ... followed by the 'goto' command */ - cpia2_send_onebyte_command(cam, &cmd, 0x0D, 1); - - release_firmware(fw); - return 0; -} - -/****************************************************************************** - * - * set_default_user_mode - * - *****************************************************************************/ -static int set_default_user_mode(struct camera_data *cam) -{ - unsigned char user_mode; - unsigned char frame_rate; - int width = cam->params.roi.width; - int height = cam->params.roi.height; - - switch (cam->params.version.sensor_flags) { - case CPIA2_VP_SENSOR_FLAGS_404: - case CPIA2_VP_SENSOR_FLAGS_407: - case CPIA2_VP_SENSOR_FLAGS_409: - case CPIA2_VP_SENSOR_FLAGS_410: - if ((width > STV_IMAGE_QCIF_COLS) - || (height > STV_IMAGE_QCIF_ROWS)) { - user_mode = CPIA2_VP_USER_MODE_CIF; - } else { - user_mode = CPIA2_VP_USER_MODE_QCIFDS; - } - frame_rate = CPIA2_VP_FRAMERATE_30; - break; - case CPIA2_VP_SENSOR_FLAGS_500: - if ((width > STV_IMAGE_CIF_COLS) - || (height > STV_IMAGE_CIF_ROWS)) { - user_mode = CPIA2_VP_USER_MODE_VGA; - } else { - user_mode = CPIA2_VP_USER_MODE_QVGADS; - } - if (cam->params.pnp_id.device_type == DEVICE_STV_672) - frame_rate = CPIA2_VP_FRAMERATE_15; - else - frame_rate = CPIA2_VP_FRAMERATE_30; - break; - default: - LOG("%s: Invalid sensor flag value 0x%0X\n",__func__, - cam->params.version.sensor_flags); - return -EINVAL; - } - - DBG("Sensor flag = 0x%0x, user mode = 0x%0x, frame rate = 0x%X\n", - cam->params.version.sensor_flags, user_mode, frame_rate); - cpia2_do_command(cam, CPIA2_CMD_SET_USER_MODE, TRANSFER_WRITE, - user_mode); - if(cam->params.vp_params.frame_rate > 0 && - frame_rate > cam->params.vp_params.frame_rate) - frame_rate = cam->params.vp_params.frame_rate; - - cpia2_set_fps(cam, frame_rate); - -// if (cam->params.pnp_id.device_type == DEVICE_STV_676) -// cpia2_do_command(cam, -// CPIA2_CMD_SET_VP_SYSTEM_CTRL, -// TRANSFER_WRITE, -// CPIA2_VP_SYSTEMCTRL_HK_CONTROL | -// CPIA2_VP_SYSTEMCTRL_POWER_CONTROL); - - return 0; -} - -/****************************************************************************** - * - * cpia2_match_video_size - * - * return the best match, where 'best' is as always - * the largest that is not bigger than what is requested. - *****************************************************************************/ -int cpia2_match_video_size(int width, int height) -{ - if (width >= STV_IMAGE_VGA_COLS && height >= STV_IMAGE_VGA_ROWS) - return VIDEOSIZE_VGA; - - if (width >= STV_IMAGE_CIF_COLS && height >= STV_IMAGE_CIF_ROWS) - return VIDEOSIZE_CIF; - - if (width >= STV_IMAGE_QVGA_COLS && height >= STV_IMAGE_QVGA_ROWS) - return VIDEOSIZE_QVGA; - - if (width >= 288 && height >= 216) - return VIDEOSIZE_288_216; - - if (width >= 256 && height >= 192) - return VIDEOSIZE_256_192; - - if (width >= 224 && height >= 168) - return VIDEOSIZE_224_168; - - if (width >= 192 && height >= 144) - return VIDEOSIZE_192_144; - - if (width >= STV_IMAGE_QCIF_COLS && height >= STV_IMAGE_QCIF_ROWS) - return VIDEOSIZE_QCIF; - - return -1; -} - -/****************************************************************************** - * - * SetVideoSize - * - *****************************************************************************/ -static int set_vw_size(struct camera_data *cam, int size) -{ - int retval = 0; - - cam->params.vp_params.video_size = size; - - switch (size) { - case VIDEOSIZE_VGA: - DBG("Setting size to VGA\n"); - cam->params.roi.width = STV_IMAGE_VGA_COLS; - cam->params.roi.height = STV_IMAGE_VGA_ROWS; - cam->width = STV_IMAGE_VGA_COLS; - cam->height = STV_IMAGE_VGA_ROWS; - break; - case VIDEOSIZE_CIF: - DBG("Setting size to CIF\n"); - cam->params.roi.width = STV_IMAGE_CIF_COLS; - cam->params.roi.height = STV_IMAGE_CIF_ROWS; - cam->width = STV_IMAGE_CIF_COLS; - cam->height = STV_IMAGE_CIF_ROWS; - break; - case VIDEOSIZE_QVGA: - DBG("Setting size to QVGA\n"); - cam->params.roi.width = STV_IMAGE_QVGA_COLS; - cam->params.roi.height = STV_IMAGE_QVGA_ROWS; - cam->width = STV_IMAGE_QVGA_COLS; - cam->height = STV_IMAGE_QVGA_ROWS; - break; - case VIDEOSIZE_288_216: - cam->params.roi.width = 288; - cam->params.roi.height = 216; - cam->width = 288; - cam->height = 216; - break; - case VIDEOSIZE_256_192: - cam->width = 256; - cam->height = 192; - cam->params.roi.width = 256; - cam->params.roi.height = 192; - break; - case VIDEOSIZE_224_168: - cam->width = 224; - cam->height = 168; - cam->params.roi.width = 224; - cam->params.roi.height = 168; - break; - case VIDEOSIZE_192_144: - cam->width = 192; - cam->height = 144; - cam->params.roi.width = 192; - cam->params.roi.height = 144; - break; - case VIDEOSIZE_QCIF: - DBG("Setting size to QCIF\n"); - cam->params.roi.width = STV_IMAGE_QCIF_COLS; - cam->params.roi.height = STV_IMAGE_QCIF_ROWS; - cam->width = STV_IMAGE_QCIF_COLS; - cam->height = STV_IMAGE_QCIF_ROWS; - break; - default: - retval = -EINVAL; - } - return retval; -} - -/****************************************************************************** - * - * configure_sensor - * - *****************************************************************************/ -static int configure_sensor(struct camera_data *cam, - int req_width, int req_height) -{ - int retval; - - switch (cam->params.version.sensor_flags) { - case CPIA2_VP_SENSOR_FLAGS_404: - case CPIA2_VP_SENSOR_FLAGS_407: - case CPIA2_VP_SENSOR_FLAGS_409: - case CPIA2_VP_SENSOR_FLAGS_410: - retval = config_sensor_410(cam, req_width, req_height); - break; - case CPIA2_VP_SENSOR_FLAGS_500: - retval = config_sensor_500(cam, req_width, req_height); - break; - default: - return -EINVAL; - } - - return retval; -} - -/****************************************************************************** - * - * config_sensor_410 - * - *****************************************************************************/ -static int config_sensor_410(struct camera_data *cam, - int req_width, int req_height) -{ - struct cpia2_command cmd; - int i = 0; - int image_size; - int image_type; - int width = req_width; - int height = req_height; - - /*** - * Make sure size doesn't exceed CIF. - ***/ - if (width > STV_IMAGE_CIF_COLS) - width = STV_IMAGE_CIF_COLS; - if (height > STV_IMAGE_CIF_ROWS) - height = STV_IMAGE_CIF_ROWS; - - image_size = cpia2_match_video_size(width, height); - - DBG("Config 410: width = %d, height = %d\n", width, height); - DBG("Image size returned is %d\n", image_size); - if (image_size >= 0) { - set_vw_size(cam, image_size); - width = cam->params.roi.width; - height = cam->params.roi.height; - - DBG("After set_vw_size(), width = %d, height = %d\n", - width, height); - if (width <= 176 && height <= 144) { - DBG("image type = VIDEOSIZE_QCIF\n"); - image_type = VIDEOSIZE_QCIF; - } - else if (width <= 320 && height <= 240) { - DBG("image type = VIDEOSIZE_QVGA\n"); - image_type = VIDEOSIZE_QVGA; - } - else { - DBG("image type = VIDEOSIZE_CIF\n"); - image_type = VIDEOSIZE_CIF; - } - } else { - ERR("ConfigSensor410 failed\n"); - return -EINVAL; - } - - cmd.req_mode = CAMERAACCESS_TYPE_RANDOM | CAMERAACCESS_VC; - cmd.direction = TRANSFER_WRITE; - - /* VC Format */ - cmd.buffer.registers[i].index = CPIA2_VC_VC_FORMAT; - if (image_type == VIDEOSIZE_CIF) { - cmd.buffer.registers[i++].value = - (u8) (CPIA2_VC_VC_FORMAT_UFIRST | - CPIA2_VC_VC_FORMAT_SHORTLINE); - } else { - cmd.buffer.registers[i++].value = - (u8) CPIA2_VC_VC_FORMAT_UFIRST; - } - - /* VC Clocks */ - cmd.buffer.registers[i].index = CPIA2_VC_VC_CLOCKS; - if (image_type == VIDEOSIZE_QCIF) { - if (cam->params.pnp_id.device_type == DEVICE_STV_672) { - cmd.buffer.registers[i++].value= - (u8)(CPIA2_VC_VC_672_CLOCKS_CIF_DIV_BY_3 | - CPIA2_VC_VC_672_CLOCKS_SCALING | - CPIA2_VC_VC_CLOCKS_LOGDIV2); - DBG("VC_Clocks (0xc4) should be B\n"); - } - else { - cmd.buffer.registers[i++].value= - (u8)(CPIA2_VC_VC_676_CLOCKS_CIF_DIV_BY_3 | - CPIA2_VC_VC_CLOCKS_LOGDIV2); - } - } else { - if (cam->params.pnp_id.device_type == DEVICE_STV_672) { - cmd.buffer.registers[i++].value = - (u8) (CPIA2_VC_VC_672_CLOCKS_CIF_DIV_BY_3 | - CPIA2_VC_VC_CLOCKS_LOGDIV0); - } - else { - cmd.buffer.registers[i++].value = - (u8) (CPIA2_VC_VC_676_CLOCKS_CIF_DIV_BY_3 | - CPIA2_VC_VC_676_CLOCKS_SCALING | - CPIA2_VC_VC_CLOCKS_LOGDIV0); - } - } - DBG("VC_Clocks (0xc4) = 0x%0X\n", cmd.buffer.registers[i-1].value); - - /* Input reqWidth from VC */ - cmd.buffer.registers[i].index = CPIA2_VC_VC_IHSIZE_LO; - if (image_type == VIDEOSIZE_QCIF) - cmd.buffer.registers[i++].value = - (u8) (STV_IMAGE_QCIF_COLS / 4); - else - cmd.buffer.registers[i++].value = - (u8) (STV_IMAGE_CIF_COLS / 4); - - /* Timings */ - cmd.buffer.registers[i].index = CPIA2_VC_VC_XLIM_HI; - if (image_type == VIDEOSIZE_QCIF) - cmd.buffer.registers[i++].value = (u8) 0; - else - cmd.buffer.registers[i++].value = (u8) 1; - - cmd.buffer.registers[i].index = CPIA2_VC_VC_XLIM_LO; - if (image_type == VIDEOSIZE_QCIF) - cmd.buffer.registers[i++].value = (u8) 208; - else - cmd.buffer.registers[i++].value = (u8) 160; - - cmd.buffer.registers[i].index = CPIA2_VC_VC_YLIM_HI; - if (image_type == VIDEOSIZE_QCIF) - cmd.buffer.registers[i++].value = (u8) 0; - else - cmd.buffer.registers[i++].value = (u8) 1; - - cmd.buffer.registers[i].index = CPIA2_VC_VC_YLIM_LO; - if (image_type == VIDEOSIZE_QCIF) - cmd.buffer.registers[i++].value = (u8) 160; - else - cmd.buffer.registers[i++].value = (u8) 64; - - /* Output Image Size */ - cmd.buffer.registers[i].index = CPIA2_VC_VC_OHSIZE; - cmd.buffer.registers[i++].value = cam->params.roi.width / 4; - - cmd.buffer.registers[i].index = CPIA2_VC_VC_OVSIZE; - cmd.buffer.registers[i++].value = cam->params.roi.height / 4; - - /* Cropping */ - cmd.buffer.registers[i].index = CPIA2_VC_VC_HCROP; - if (image_type == VIDEOSIZE_QCIF) - cmd.buffer.registers[i++].value = - (u8) (((STV_IMAGE_QCIF_COLS / 4) - (width / 4)) / 2); - else - cmd.buffer.registers[i++].value = - (u8) (((STV_IMAGE_CIF_COLS / 4) - (width / 4)) / 2); - - cmd.buffer.registers[i].index = CPIA2_VC_VC_VCROP; - if (image_type == VIDEOSIZE_QCIF) - cmd.buffer.registers[i++].value = - (u8) (((STV_IMAGE_QCIF_ROWS / 4) - (height / 4)) / 2); - else - cmd.buffer.registers[i++].value = - (u8) (((STV_IMAGE_CIF_ROWS / 4) - (height / 4)) / 2); - - /* Scaling registers (defaults) */ - cmd.buffer.registers[i].index = CPIA2_VC_VC_HPHASE; - cmd.buffer.registers[i++].value = (u8) 0; - - cmd.buffer.registers[i].index = CPIA2_VC_VC_VPHASE; - cmd.buffer.registers[i++].value = (u8) 0; - - cmd.buffer.registers[i].index = CPIA2_VC_VC_HISPAN; - cmd.buffer.registers[i++].value = (u8) 31; - - cmd.buffer.registers[i].index = CPIA2_VC_VC_VISPAN; - cmd.buffer.registers[i++].value = (u8) 31; - - cmd.buffer.registers[i].index = CPIA2_VC_VC_HICROP; - cmd.buffer.registers[i++].value = (u8) 0; - - cmd.buffer.registers[i].index = CPIA2_VC_VC_VICROP; - cmd.buffer.registers[i++].value = (u8) 0; - - cmd.buffer.registers[i].index = CPIA2_VC_VC_HFRACT; - cmd.buffer.registers[i++].value = (u8) 0x81; /* = 8/1 = 8 (HIBYTE/LOBYTE) */ - - cmd.buffer.registers[i].index = CPIA2_VC_VC_VFRACT; - cmd.buffer.registers[i++].value = (u8) 0x81; /* = 8/1 = 8 (HIBYTE/LOBYTE) */ - - cmd.reg_count = i; - - cpia2_send_command(cam, &cmd); - - return i; -} - - -/****************************************************************************** - * - * config_sensor_500(cam) - * - *****************************************************************************/ -static int config_sensor_500(struct camera_data *cam, - int req_width, int req_height) -{ - struct cpia2_command cmd; - int i = 0; - int image_size = VIDEOSIZE_CIF; - int image_type = VIDEOSIZE_VGA; - int width = req_width; - int height = req_height; - unsigned int device = cam->params.pnp_id.device_type; - - image_size = cpia2_match_video_size(width, height); - - if (width > STV_IMAGE_CIF_COLS || height > STV_IMAGE_CIF_ROWS) - image_type = VIDEOSIZE_VGA; - else if (width > STV_IMAGE_QVGA_COLS || height > STV_IMAGE_QVGA_ROWS) - image_type = VIDEOSIZE_CIF; - else if (width > STV_IMAGE_QCIF_COLS || height > STV_IMAGE_QCIF_ROWS) - image_type = VIDEOSIZE_QVGA; - else - image_type = VIDEOSIZE_QCIF; - - if (image_size >= 0) { - set_vw_size(cam, image_size); - width = cam->params.roi.width; - height = cam->params.roi.height; - } else { - ERR("ConfigSensor500 failed\n"); - return -EINVAL; - } - - DBG("image_size = %d, width = %d, height = %d, type = %d\n", - image_size, width, height, image_type); - - cmd.req_mode = CAMERAACCESS_TYPE_RANDOM | CAMERAACCESS_VC; - cmd.direction = TRANSFER_WRITE; - i = 0; - - /* VC Format */ - cmd.buffer.registers[i].index = CPIA2_VC_VC_FORMAT; - cmd.buffer.registers[i].value = (u8) CPIA2_VC_VC_FORMAT_UFIRST; - if (image_type == VIDEOSIZE_QCIF) - cmd.buffer.registers[i].value |= (u8) CPIA2_VC_VC_FORMAT_DECIMATING; - i++; - - /* VC Clocks */ - cmd.buffer.registers[i].index = CPIA2_VC_VC_CLOCKS; - if (device == DEVICE_STV_672) { - if (image_type == VIDEOSIZE_VGA) - cmd.buffer.registers[i].value = - (u8)CPIA2_VC_VC_CLOCKS_LOGDIV1; - else - cmd.buffer.registers[i].value = - (u8)(CPIA2_VC_VC_672_CLOCKS_SCALING | - CPIA2_VC_VC_CLOCKS_LOGDIV3); - } else { - if (image_type == VIDEOSIZE_VGA) - cmd.buffer.registers[i].value = - (u8)CPIA2_VC_VC_CLOCKS_LOGDIV0; - else - cmd.buffer.registers[i].value = - (u8)(CPIA2_VC_VC_676_CLOCKS_SCALING | - CPIA2_VC_VC_CLOCKS_LOGDIV2); - } - i++; - - DBG("VC_CLOCKS = 0x%X\n", cmd.buffer.registers[i-1].value); - - /* Input width from VP */ - cmd.buffer.registers[i].index = CPIA2_VC_VC_IHSIZE_LO; - if (image_type == VIDEOSIZE_VGA) - cmd.buffer.registers[i].value = - (u8) (STV_IMAGE_VGA_COLS / 4); - else - cmd.buffer.registers[i].value = - (u8) (STV_IMAGE_QVGA_COLS / 4); - i++; - DBG("Input width = %d\n", cmd.buffer.registers[i-1].value); - - /* Timings */ - cmd.buffer.registers[i].index = CPIA2_VC_VC_XLIM_HI; - if (image_type == VIDEOSIZE_VGA) - cmd.buffer.registers[i++].value = (u8) 2; - else - cmd.buffer.registers[i++].value = (u8) 1; - - cmd.buffer.registers[i].index = CPIA2_VC_VC_XLIM_LO; - if (image_type == VIDEOSIZE_VGA) - cmd.buffer.registers[i++].value = (u8) 250; - else if (image_type == VIDEOSIZE_QVGA) - cmd.buffer.registers[i++].value = (u8) 125; - else - cmd.buffer.registers[i++].value = (u8) 160; - - cmd.buffer.registers[i].index = CPIA2_VC_VC_YLIM_HI; - if (image_type == VIDEOSIZE_VGA) - cmd.buffer.registers[i++].value = (u8) 2; - else - cmd.buffer.registers[i++].value = (u8) 1; - - cmd.buffer.registers[i].index = CPIA2_VC_VC_YLIM_LO; - if (image_type == VIDEOSIZE_VGA) - cmd.buffer.registers[i++].value = (u8) 12; - else if (image_type == VIDEOSIZE_QVGA) - cmd.buffer.registers[i++].value = (u8) 64; - else - cmd.buffer.registers[i++].value = (u8) 6; - - /* Output Image Size */ - cmd.buffer.registers[i].index = CPIA2_VC_VC_OHSIZE; - if (image_type == VIDEOSIZE_QCIF) - cmd.buffer.registers[i++].value = STV_IMAGE_CIF_COLS / 4; - else - cmd.buffer.registers[i++].value = width / 4; - - cmd.buffer.registers[i].index = CPIA2_VC_VC_OVSIZE; - if (image_type == VIDEOSIZE_QCIF) - cmd.buffer.registers[i++].value = STV_IMAGE_CIF_ROWS / 4; - else - cmd.buffer.registers[i++].value = height / 4; - - /* Cropping */ - cmd.buffer.registers[i].index = CPIA2_VC_VC_HCROP; - if (image_type == VIDEOSIZE_VGA) - cmd.buffer.registers[i++].value = - (u8) (((STV_IMAGE_VGA_COLS / 4) - (width / 4)) / 2); - else if (image_type == VIDEOSIZE_QVGA) - cmd.buffer.registers[i++].value = - (u8) (((STV_IMAGE_QVGA_COLS / 4) - (width / 4)) / 2); - else if (image_type == VIDEOSIZE_CIF) - cmd.buffer.registers[i++].value = - (u8) (((STV_IMAGE_CIF_COLS / 4) - (width / 4)) / 2); - else /*if (image_type == VIDEOSIZE_QCIF)*/ - cmd.buffer.registers[i++].value = - (u8) (((STV_IMAGE_QCIF_COLS / 4) - (width / 4)) / 2); - - cmd.buffer.registers[i].index = CPIA2_VC_VC_VCROP; - if (image_type == VIDEOSIZE_VGA) - cmd.buffer.registers[i++].value = - (u8) (((STV_IMAGE_VGA_ROWS / 4) - (height / 4)) / 2); - else if (image_type == VIDEOSIZE_QVGA) - cmd.buffer.registers[i++].value = - (u8) (((STV_IMAGE_QVGA_ROWS / 4) - (height / 4)) / 2); - else if (image_type == VIDEOSIZE_CIF) - cmd.buffer.registers[i++].value = - (u8) (((STV_IMAGE_CIF_ROWS / 4) - (height / 4)) / 2); - else /*if (image_type == VIDEOSIZE_QCIF)*/ - cmd.buffer.registers[i++].value = - (u8) (((STV_IMAGE_QCIF_ROWS / 4) - (height / 4)) / 2); - - /* Scaling registers (defaults) */ - cmd.buffer.registers[i].index = CPIA2_VC_VC_HPHASE; - if (image_type == VIDEOSIZE_CIF || image_type == VIDEOSIZE_QCIF) - cmd.buffer.registers[i++].value = (u8) 36; - else - cmd.buffer.registers[i++].value = (u8) 0; - - cmd.buffer.registers[i].index = CPIA2_VC_VC_VPHASE; - if (image_type == VIDEOSIZE_CIF || image_type == VIDEOSIZE_QCIF) - cmd.buffer.registers[i++].value = (u8) 32; - else - cmd.buffer.registers[i++].value = (u8) 0; - - cmd.buffer.registers[i].index = CPIA2_VC_VC_HISPAN; - if (image_type == VIDEOSIZE_CIF || image_type == VIDEOSIZE_QCIF) - cmd.buffer.registers[i++].value = (u8) 26; - else - cmd.buffer.registers[i++].value = (u8) 31; - - cmd.buffer.registers[i].index = CPIA2_VC_VC_VISPAN; - if (image_type == VIDEOSIZE_CIF || image_type == VIDEOSIZE_QCIF) - cmd.buffer.registers[i++].value = (u8) 21; - else - cmd.buffer.registers[i++].value = (u8) 31; - - cmd.buffer.registers[i].index = CPIA2_VC_VC_HICROP; - cmd.buffer.registers[i++].value = (u8) 0; - - cmd.buffer.registers[i].index = CPIA2_VC_VC_VICROP; - cmd.buffer.registers[i++].value = (u8) 0; - - cmd.buffer.registers[i].index = CPIA2_VC_VC_HFRACT; - if (image_type == VIDEOSIZE_CIF || image_type == VIDEOSIZE_QCIF) - cmd.buffer.registers[i++].value = (u8) 0x2B; /* 2/11 */ - else - cmd.buffer.registers[i++].value = (u8) 0x81; /* 8/1 */ - - cmd.buffer.registers[i].index = CPIA2_VC_VC_VFRACT; - if (image_type == VIDEOSIZE_CIF || image_type == VIDEOSIZE_QCIF) - cmd.buffer.registers[i++].value = (u8) 0x13; /* 1/3 */ - else - cmd.buffer.registers[i++].value = (u8) 0x81; /* 8/1 */ - - cmd.reg_count = i; - - cpia2_send_command(cam, &cmd); - - return i; -} - - -/****************************************************************************** - * - * setallproperties - * - * This sets all user changeable properties to the values in cam->params. - *****************************************************************************/ -static int set_all_properties(struct camera_data *cam) -{ - /** - * Don't set target_kb here, it will be set later. - * framerate and user_mode were already set (set_default_user_mode). - **/ - - cpia2_usb_change_streaming_alternate(cam, - cam->params.camera_state.stream_mode); - - cpia2_do_command(cam, - CPIA2_CMD_SET_VC_MP_GPIO_DIRECTION, - TRANSFER_WRITE, cam->params.vp_params.gpio_direction); - cpia2_do_command(cam, CPIA2_CMD_SET_VC_MP_GPIO_DATA, TRANSFER_WRITE, - cam->params.vp_params.gpio_data); - - v4l2_ctrl_handler_setup(&cam->hdl); - - wake_system(cam); - - set_lowlight_boost(cam); - - return 0; -} - -/****************************************************************************** - * - * cpia2_save_camera_state - * - *****************************************************************************/ -void cpia2_save_camera_state(struct camera_data *cam) -{ - cpia2_do_command(cam, CPIA2_CMD_GET_USER_EFFECTS, TRANSFER_READ, 0); - cpia2_do_command(cam, CPIA2_CMD_GET_VC_MP_GPIO_DIRECTION, TRANSFER_READ, - 0); - cpia2_do_command(cam, CPIA2_CMD_GET_VC_MP_GPIO_DATA, TRANSFER_READ, 0); - /* Don't get framerate or target_kb. Trust the values we already have */ -} - - -/****************************************************************************** - * - * cpia2_set_flicker_mode - * - *****************************************************************************/ -int cpia2_set_flicker_mode(struct camera_data *cam, int mode) -{ - unsigned char cam_reg; - int err = 0; - - if(cam->params.pnp_id.device_type != DEVICE_STV_672) - return -EINVAL; - - /* Set the appropriate bits in FLICKER_MODES, preserving the rest */ - if((err = cpia2_do_command(cam, CPIA2_CMD_GET_FLICKER_MODES, - TRANSFER_READ, 0))) - return err; - cam_reg = cam->params.flicker_control.cam_register; - - switch(mode) { - case NEVER_FLICKER: - cam_reg |= CPIA2_VP_FLICKER_MODES_NEVER_FLICKER; - cam_reg &= ~CPIA2_VP_FLICKER_MODES_50HZ; - break; - case FLICKER_60: - cam_reg &= ~CPIA2_VP_FLICKER_MODES_NEVER_FLICKER; - cam_reg &= ~CPIA2_VP_FLICKER_MODES_50HZ; - break; - case FLICKER_50: - cam_reg &= ~CPIA2_VP_FLICKER_MODES_NEVER_FLICKER; - cam_reg |= CPIA2_VP_FLICKER_MODES_50HZ; - break; - default: - return -EINVAL; - } - - if((err = cpia2_do_command(cam, CPIA2_CMD_SET_FLICKER_MODES, - TRANSFER_WRITE, cam_reg))) - return err; - - /* Set the appropriate bits in EXP_MODES, preserving the rest */ - if((err = cpia2_do_command(cam, CPIA2_CMD_GET_VP_EXP_MODES, - TRANSFER_READ, 0))) - return err; - cam_reg = cam->params.vp_params.exposure_modes; - - if (mode == NEVER_FLICKER) { - cam_reg |= CPIA2_VP_EXPOSURE_MODES_INHIBIT_FLICKER; - } else { - cam_reg &= ~CPIA2_VP_EXPOSURE_MODES_INHIBIT_FLICKER; - } - - if((err = cpia2_do_command(cam, CPIA2_CMD_SET_VP_EXP_MODES, - TRANSFER_WRITE, cam_reg))) - return err; - - if((err = cpia2_do_command(cam, CPIA2_CMD_REHASH_VP4, - TRANSFER_WRITE, 1))) - return err; - - switch(mode) { - case NEVER_FLICKER: - case FLICKER_60: - case FLICKER_50: - cam->params.flicker_control.flicker_mode_req = mode; - break; - default: - err = -EINVAL; - } - - return err; -} - -/****************************************************************************** - * - * cpia2_set_property_flip - * - *****************************************************************************/ -void cpia2_set_property_flip(struct camera_data *cam, int prop_val) -{ - unsigned char cam_reg; - - cpia2_do_command(cam, CPIA2_CMD_GET_USER_EFFECTS, TRANSFER_READ, 0); - cam_reg = cam->params.vp_params.user_effects; - - if (prop_val) - { - cam_reg |= CPIA2_VP_USER_EFFECTS_FLIP; - } - else - { - cam_reg &= ~CPIA2_VP_USER_EFFECTS_FLIP; - } - cam->params.vp_params.user_effects = cam_reg; - cpia2_do_command(cam, CPIA2_CMD_SET_USER_EFFECTS, TRANSFER_WRITE, - cam_reg); -} - -/****************************************************************************** - * - * cpia2_set_property_mirror - * - *****************************************************************************/ -void cpia2_set_property_mirror(struct camera_data *cam, int prop_val) -{ - unsigned char cam_reg; - - cpia2_do_command(cam, CPIA2_CMD_GET_USER_EFFECTS, TRANSFER_READ, 0); - cam_reg = cam->params.vp_params.user_effects; - - if (prop_val) - { - cam_reg |= CPIA2_VP_USER_EFFECTS_MIRROR; - } - else - { - cam_reg &= ~CPIA2_VP_USER_EFFECTS_MIRROR; - } - cam->params.vp_params.user_effects = cam_reg; - cpia2_do_command(cam, CPIA2_CMD_SET_USER_EFFECTS, TRANSFER_WRITE, - cam_reg); -} - -/****************************************************************************** - * - * cpia2_set_gpio - * - *****************************************************************************/ -int cpia2_set_gpio(struct camera_data *cam, unsigned char setting) -{ - int ret; - - /* Set the microport direction (register 0x90, should be defined - * already) to 1 (user output), and set the microport data (0x91) to - * the value in the ioctl argument. - */ - - ret = cpia2_do_command(cam, - CPIA2_CMD_SET_VC_MP_GPIO_DIRECTION, - CPIA2_VC_MP_DIR_OUTPUT, - 255); - if (ret < 0) - return ret; - cam->params.vp_params.gpio_direction = 255; - - ret = cpia2_do_command(cam, - CPIA2_CMD_SET_VC_MP_GPIO_DATA, - CPIA2_VC_MP_DIR_OUTPUT, - setting); - if (ret < 0) - return ret; - cam->params.vp_params.gpio_data = setting; - - return 0; -} - -/****************************************************************************** - * - * cpia2_set_fps - * - *****************************************************************************/ -int cpia2_set_fps(struct camera_data *cam, int framerate) -{ - int retval; - - switch(framerate) { - case CPIA2_VP_FRAMERATE_30: - case CPIA2_VP_FRAMERATE_25: - if(cam->params.pnp_id.device_type == DEVICE_STV_672 && - cam->params.version.sensor_flags == - CPIA2_VP_SENSOR_FLAGS_500) { - return -EINVAL; - } - fallthrough; - case CPIA2_VP_FRAMERATE_15: - case CPIA2_VP_FRAMERATE_12_5: - case CPIA2_VP_FRAMERATE_7_5: - case CPIA2_VP_FRAMERATE_6_25: - break; - default: - return -EINVAL; - } - - if (cam->params.pnp_id.device_type == DEVICE_STV_672 && - framerate == CPIA2_VP_FRAMERATE_15) - framerate = 0; /* Work around bug in VP4 */ - - retval = cpia2_do_command(cam, - CPIA2_CMD_FRAMERATE_REQ, - TRANSFER_WRITE, - framerate); - - if(retval == 0) - cam->params.vp_params.frame_rate = framerate; - - return retval; -} - -/****************************************************************************** - * - * cpia2_set_brightness - * - *****************************************************************************/ -void cpia2_set_brightness(struct camera_data *cam, unsigned char value) -{ - /*** - * Don't let the register be set to zero - bug in VP4 - flash of full - * brightness - ***/ - if (cam->params.pnp_id.device_type == DEVICE_STV_672 && value == 0) - value++; - DBG("Setting brightness to %d (0x%0x)\n", value, value); - cpia2_do_command(cam, CPIA2_CMD_SET_VP_BRIGHTNESS, TRANSFER_WRITE, value); -} - -/****************************************************************************** - * - * cpia2_set_contrast - * - *****************************************************************************/ -void cpia2_set_contrast(struct camera_data *cam, unsigned char value) -{ - DBG("Setting contrast to %d (0x%0x)\n", value, value); - cpia2_do_command(cam, CPIA2_CMD_SET_CONTRAST, TRANSFER_WRITE, value); -} - -/****************************************************************************** - * - * cpia2_set_saturation - * - *****************************************************************************/ -void cpia2_set_saturation(struct camera_data *cam, unsigned char value) -{ - DBG("Setting saturation to %d (0x%0x)\n", value, value); - cpia2_do_command(cam,CPIA2_CMD_SET_VP_SATURATION, TRANSFER_WRITE,value); -} - -/****************************************************************************** - * - * wake_system - * - *****************************************************************************/ -static void wake_system(struct camera_data *cam) -{ - cpia2_do_command(cam, CPIA2_CMD_SET_WAKEUP, TRANSFER_WRITE, 0); -} - -/****************************************************************************** - * - * set_lowlight_boost - * - * Valid for STV500 sensor only - *****************************************************************************/ -static void set_lowlight_boost(struct camera_data *cam) -{ - struct cpia2_command cmd; - - if (cam->params.pnp_id.device_type != DEVICE_STV_672 || - cam->params.version.sensor_flags != CPIA2_VP_SENSOR_FLAGS_500) - return; - - cmd.direction = TRANSFER_WRITE; - cmd.req_mode = CAMERAACCESS_TYPE_BLOCK | CAMERAACCESS_VP; - cmd.reg_count = 3; - cmd.start = CPIA2_VP_RAM_ADDR_H; - - cmd.buffer.block_data[0] = 0; /* High byte of address to write to */ - cmd.buffer.block_data[1] = 0x59; /* Low byte of address to write to */ - cmd.buffer.block_data[2] = 0; /* High byte of data to write */ - - cpia2_send_command(cam, &cmd); - - if (cam->params.vp_params.lowlight_boost) { - cmd.buffer.block_data[0] = 0x02; /* Low byte data to write */ - } else { - cmd.buffer.block_data[0] = 0x06; - } - cmd.start = CPIA2_VP_RAM_DATA; - cmd.reg_count = 1; - cpia2_send_command(cam, &cmd); - - /* Rehash the VP4 values */ - cpia2_do_command(cam, CPIA2_CMD_REHASH_VP4, TRANSFER_WRITE, 1); -} - -/****************************************************************************** - * - * cpia2_set_format - * - * Assumes that new size is already set in param struct. - *****************************************************************************/ -void cpia2_set_format(struct camera_data *cam) -{ - cam->flush = true; - - cpia2_usb_stream_pause(cam); - - /* reset camera to new size */ - cpia2_set_low_power(cam); - cpia2_reset_camera(cam); - cam->flush = false; - - cpia2_dbg_dump_registers(cam); - - cpia2_usb_stream_resume(cam); -} - -/****************************************************************************** - * - * cpia2_dbg_dump_registers - * - *****************************************************************************/ -void cpia2_dbg_dump_registers(struct camera_data *cam) -{ -#ifdef _CPIA2_DEBUG_ - struct cpia2_command cmd; - - if (!(debugs_on & DEBUG_DUMP_REGS)) - return; - - cmd.direction = TRANSFER_READ; - - /* Start with bank 0 (SYSTEM) */ - cmd.req_mode = CAMERAACCESS_TYPE_BLOCK | CAMERAACCESS_SYSTEM; - cmd.reg_count = 3; - cmd.start = 0; - cpia2_send_command(cam, &cmd); - printk(KERN_DEBUG "System Device Hi = 0x%X\n", - cmd.buffer.block_data[0]); - printk(KERN_DEBUG "System Device Lo = 0x%X\n", - cmd.buffer.block_data[1]); - printk(KERN_DEBUG "System_system control = 0x%X\n", - cmd.buffer.block_data[2]); - - /* Bank 1 (VC) */ - cmd.req_mode = CAMERAACCESS_TYPE_BLOCK | CAMERAACCESS_VC; - cmd.reg_count = 4; - cmd.start = 0x80; - cpia2_send_command(cam, &cmd); - printk(KERN_DEBUG "ASIC_ID = 0x%X\n", - cmd.buffer.block_data[0]); - printk(KERN_DEBUG "ASIC_REV = 0x%X\n", - cmd.buffer.block_data[1]); - printk(KERN_DEBUG "PW_CONTRL = 0x%X\n", - cmd.buffer.block_data[2]); - printk(KERN_DEBUG "WAKEUP = 0x%X\n", - cmd.buffer.block_data[3]); - - cmd.start = 0xA0; /* ST_CTRL */ - cmd.reg_count = 1; - cpia2_send_command(cam, &cmd); - printk(KERN_DEBUG "Stream ctrl = 0x%X\n", - cmd.buffer.block_data[0]); - - cmd.start = 0xA4; /* Stream status */ - cpia2_send_command(cam, &cmd); - printk(KERN_DEBUG "Stream status = 0x%X\n", - cmd.buffer.block_data[0]); - - cmd.start = 0xA8; /* USB status */ - cmd.reg_count = 3; - cpia2_send_command(cam, &cmd); - printk(KERN_DEBUG "USB_CTRL = 0x%X\n", - cmd.buffer.block_data[0]); - printk(KERN_DEBUG "USB_STRM = 0x%X\n", - cmd.buffer.block_data[1]); - printk(KERN_DEBUG "USB_STATUS = 0x%X\n", - cmd.buffer.block_data[2]); - - cmd.start = 0xAF; /* USB settings */ - cmd.reg_count = 1; - cpia2_send_command(cam, &cmd); - printk(KERN_DEBUG "USB settings = 0x%X\n", - cmd.buffer.block_data[0]); - - cmd.start = 0xC0; /* VC stuff */ - cmd.reg_count = 26; - cpia2_send_command(cam, &cmd); - printk(KERN_DEBUG "VC Control = 0x%0X\n", - cmd.buffer.block_data[0]); - printk(KERN_DEBUG "VC Format = 0x%0X\n", - cmd.buffer.block_data[3]); - printk(KERN_DEBUG "VC Clocks = 0x%0X\n", - cmd.buffer.block_data[4]); - printk(KERN_DEBUG "VC IHSize = 0x%0X\n", - cmd.buffer.block_data[5]); - printk(KERN_DEBUG "VC Xlim Hi = 0x%0X\n", - cmd.buffer.block_data[6]); - printk(KERN_DEBUG "VC XLim Lo = 0x%0X\n", - cmd.buffer.block_data[7]); - printk(KERN_DEBUG "VC YLim Hi = 0x%0X\n", - cmd.buffer.block_data[8]); - printk(KERN_DEBUG "VC YLim Lo = 0x%0X\n", - cmd.buffer.block_data[9]); - printk(KERN_DEBUG "VC OHSize = 0x%0X\n", - cmd.buffer.block_data[10]); - printk(KERN_DEBUG "VC OVSize = 0x%0X\n", - cmd.buffer.block_data[11]); - printk(KERN_DEBUG "VC HCrop = 0x%0X\n", - cmd.buffer.block_data[12]); - printk(KERN_DEBUG "VC VCrop = 0x%0X\n", - cmd.buffer.block_data[13]); - printk(KERN_DEBUG "VC HPhase = 0x%0X\n", - cmd.buffer.block_data[14]); - printk(KERN_DEBUG "VC VPhase = 0x%0X\n", - cmd.buffer.block_data[15]); - printk(KERN_DEBUG "VC HIspan = 0x%0X\n", - cmd.buffer.block_data[16]); - printk(KERN_DEBUG "VC VIspan = 0x%0X\n", - cmd.buffer.block_data[17]); - printk(KERN_DEBUG "VC HiCrop = 0x%0X\n", - cmd.buffer.block_data[18]); - printk(KERN_DEBUG "VC ViCrop = 0x%0X\n", - cmd.buffer.block_data[19]); - printk(KERN_DEBUG "VC HiFract = 0x%0X\n", - cmd.buffer.block_data[20]); - printk(KERN_DEBUG "VC ViFract = 0x%0X\n", - cmd.buffer.block_data[21]); - printk(KERN_DEBUG "VC JPeg Opt = 0x%0X\n", - cmd.buffer.block_data[22]); - printk(KERN_DEBUG "VC Creep Per = 0x%0X\n", - cmd.buffer.block_data[23]); - printk(KERN_DEBUG "VC User Sq. = 0x%0X\n", - cmd.buffer.block_data[24]); - printk(KERN_DEBUG "VC Target KB = 0x%0X\n", - cmd.buffer.block_data[25]); - - /*** VP ***/ - cmd.req_mode = CAMERAACCESS_TYPE_BLOCK | CAMERAACCESS_VP; - cmd.reg_count = 14; - cmd.start = 0; - cpia2_send_command(cam, &cmd); - - printk(KERN_DEBUG "VP Dev Hi = 0x%0X\n", - cmd.buffer.block_data[0]); - printk(KERN_DEBUG "VP Dev Lo = 0x%0X\n", - cmd.buffer.block_data[1]); - printk(KERN_DEBUG "VP Sys State = 0x%0X\n", - cmd.buffer.block_data[2]); - printk(KERN_DEBUG "VP Sys Ctrl = 0x%0X\n", - cmd.buffer.block_data[3]); - printk(KERN_DEBUG "VP Sensor flg = 0x%0X\n", - cmd.buffer.block_data[5]); - printk(KERN_DEBUG "VP Sensor Rev = 0x%0X\n", - cmd.buffer.block_data[6]); - printk(KERN_DEBUG "VP Dev Config = 0x%0X\n", - cmd.buffer.block_data[7]); - printk(KERN_DEBUG "VP GPIO_DIR = 0x%0X\n", - cmd.buffer.block_data[8]); - printk(KERN_DEBUG "VP GPIO_DATA = 0x%0X\n", - cmd.buffer.block_data[9]); - printk(KERN_DEBUG "VP Ram ADDR H = 0x%0X\n", - cmd.buffer.block_data[10]); - printk(KERN_DEBUG "VP Ram ADDR L = 0x%0X\n", - cmd.buffer.block_data[11]); - printk(KERN_DEBUG "VP RAM Data = 0x%0X\n", - cmd.buffer.block_data[12]); - printk(KERN_DEBUG "Do Call = 0x%0X\n", - cmd.buffer.block_data[13]); - - if (cam->params.pnp_id.device_type == DEVICE_STV_672) { - cmd.reg_count = 9; - cmd.start = 0x0E; - cpia2_send_command(cam, &cmd); - printk(KERN_DEBUG "VP Clock Ctrl = 0x%0X\n", - cmd.buffer.block_data[0]); - printk(KERN_DEBUG "VP Patch Rev = 0x%0X\n", - cmd.buffer.block_data[1]); - printk(KERN_DEBUG "VP Vid Mode = 0x%0X\n", - cmd.buffer.block_data[2]); - printk(KERN_DEBUG "VP Framerate = 0x%0X\n", - cmd.buffer.block_data[3]); - printk(KERN_DEBUG "VP UserEffect = 0x%0X\n", - cmd.buffer.block_data[4]); - printk(KERN_DEBUG "VP White Bal = 0x%0X\n", - cmd.buffer.block_data[5]); - printk(KERN_DEBUG "VP WB thresh = 0x%0X\n", - cmd.buffer.block_data[6]); - printk(KERN_DEBUG "VP Exp Modes = 0x%0X\n", - cmd.buffer.block_data[7]); - printk(KERN_DEBUG "VP Exp Target = 0x%0X\n", - cmd.buffer.block_data[8]); - - cmd.reg_count = 1; - cmd.start = 0x1B; - cpia2_send_command(cam, &cmd); - printk(KERN_DEBUG "VP FlickerMds = 0x%0X\n", - cmd.buffer.block_data[0]); - } else { - cmd.reg_count = 8 ; - cmd.start = 0x0E; - cpia2_send_command(cam, &cmd); - printk(KERN_DEBUG "VP Clock Ctrl = 0x%0X\n", - cmd.buffer.block_data[0]); - printk(KERN_DEBUG "VP Patch Rev = 0x%0X\n", - cmd.buffer.block_data[1]); - printk(KERN_DEBUG "VP Vid Mode = 0x%0X\n", - cmd.buffer.block_data[5]); - printk(KERN_DEBUG "VP Framerate = 0x%0X\n", - cmd.buffer.block_data[6]); - printk(KERN_DEBUG "VP UserEffect = 0x%0X\n", - cmd.buffer.block_data[7]); - - cmd.reg_count = 1; - cmd.start = CPIA2_VP5_EXPOSURE_TARGET; - cpia2_send_command(cam, &cmd); - printk(KERN_DEBUG "VP5 Exp Target= 0x%0X\n", - cmd.buffer.block_data[0]); - - cmd.reg_count = 4; - cmd.start = 0x3A; - cpia2_send_command(cam, &cmd); - printk(KERN_DEBUG "VP5 MY Black = 0x%0X\n", - cmd.buffer.block_data[0]); - printk(KERN_DEBUG "VP5 MCY Range = 0x%0X\n", - cmd.buffer.block_data[1]); - printk(KERN_DEBUG "VP5 MYCEILING = 0x%0X\n", - cmd.buffer.block_data[2]); - printk(KERN_DEBUG "VP5 MCUV Sat = 0x%0X\n", - cmd.buffer.block_data[3]); - } -#endif -} - -/****************************************************************************** - * - * reset_camera_struct - * - * Sets all values to the defaults - *****************************************************************************/ -static void reset_camera_struct(struct camera_data *cam) -{ - /*** - * The following parameter values are the defaults from the register map. - ***/ - cam->params.vp_params.lowlight_boost = 0; - - /* FlickerModes */ - cam->params.flicker_control.flicker_mode_req = NEVER_FLICKER; - - /* jpeg params */ - cam->params.compression.jpeg_options = CPIA2_VC_VC_JPEG_OPT_DEFAULT; - cam->params.compression.creep_period = 2; - cam->params.compression.user_squeeze = 20; - cam->params.compression.inhibit_htables = false; - - /* gpio params */ - cam->params.vp_params.gpio_direction = 0; /* write, the default safe mode */ - cam->params.vp_params.gpio_data = 0; - - /* Target kb params */ - cam->params.vc_params.quality = 100; - - /*** - * Set Sensor FPS as fast as possible. - ***/ - if(cam->params.pnp_id.device_type == DEVICE_STV_672) { - if(cam->params.version.sensor_flags == CPIA2_VP_SENSOR_FLAGS_500) - cam->params.vp_params.frame_rate = CPIA2_VP_FRAMERATE_15; - else - cam->params.vp_params.frame_rate = CPIA2_VP_FRAMERATE_30; - } else { - cam->params.vp_params.frame_rate = CPIA2_VP_FRAMERATE_30; - } - - /*** - * Set default video mode as large as possible : - * for vga sensor set to vga, for cif sensor set to CIF. - ***/ - if (cam->params.version.sensor_flags == CPIA2_VP_SENSOR_FLAGS_500) { - cam->sensor_type = CPIA2_SENSOR_500; - cam->video_size = VIDEOSIZE_VGA; - cam->params.roi.width = STV_IMAGE_VGA_COLS; - cam->params.roi.height = STV_IMAGE_VGA_ROWS; - } else { - cam->sensor_type = CPIA2_SENSOR_410; - cam->video_size = VIDEOSIZE_CIF; - cam->params.roi.width = STV_IMAGE_CIF_COLS; - cam->params.roi.height = STV_IMAGE_CIF_ROWS; - } - - cam->width = cam->params.roi.width; - cam->height = cam->params.roi.height; -} - -/****************************************************************************** - * - * cpia2_init_camera_struct - * - * Deinitialize camera struct - *****************************************************************************/ -void cpia2_deinit_camera_struct(struct camera_data *cam, struct usb_interface *intf) -{ - v4l2_device_unregister(&cam->v4l2_dev); - kfree(cam); -} - -/****************************************************************************** - * - * cpia2_init_camera_struct - * - * Initializes camera struct, does not call reset to fill in defaults. - *****************************************************************************/ -struct camera_data *cpia2_init_camera_struct(struct usb_interface *intf) -{ - struct camera_data *cam; - - cam = kzalloc(sizeof(*cam), GFP_KERNEL); - - if (!cam) { - ERR("couldn't kmalloc cpia2 struct\n"); - return NULL; - } - - cam->v4l2_dev.release = cpia2_camera_release; - if (v4l2_device_register(&intf->dev, &cam->v4l2_dev) < 0) { - v4l2_err(&cam->v4l2_dev, "couldn't register v4l2_device\n"); - kfree(cam); - return NULL; - } - - mutex_init(&cam->v4l2_lock); - init_waitqueue_head(&cam->wq_stream); - - return cam; -} - -/****************************************************************************** - * - * cpia2_init_camera - * - * Initializes camera. - *****************************************************************************/ -int cpia2_init_camera(struct camera_data *cam) -{ - DBG("Start\n"); - - cam->mmapped = false; - - /* Get sensor and asic types before reset. */ - cpia2_set_high_power(cam); - cpia2_get_version_info(cam); - if (cam->params.version.asic_id != CPIA2_ASIC_672) { - ERR("Device IO error (asicID has incorrect value of 0x%X\n", - cam->params.version.asic_id); - return -ENODEV; - } - - /* Set GPIO direction and data to a safe state. */ - cpia2_do_command(cam, CPIA2_CMD_SET_VC_MP_GPIO_DIRECTION, - TRANSFER_WRITE, 0); - cpia2_do_command(cam, CPIA2_CMD_SET_VC_MP_GPIO_DATA, - TRANSFER_WRITE, 0); - - /* resetting struct requires version info for sensor and asic types */ - reset_camera_struct(cam); - - cpia2_set_low_power(cam); - - DBG("End\n"); - - return 0; -} - -/****************************************************************************** - * - * cpia2_allocate_buffers - * - *****************************************************************************/ -int cpia2_allocate_buffers(struct camera_data *cam) -{ - int i; - - if(!cam->buffers) { - u32 size = cam->num_frames*sizeof(struct framebuf); - cam->buffers = kmalloc(size, GFP_KERNEL); - if(!cam->buffers) { - ERR("couldn't kmalloc frame buffer structures\n"); - return -ENOMEM; - } - } - - if(!cam->frame_buffer) { - cam->frame_buffer = rvmalloc(cam->frame_size*cam->num_frames); - if (!cam->frame_buffer) { - ERR("couldn't vmalloc frame buffer data area\n"); - kfree(cam->buffers); - cam->buffers = NULL; - return -ENOMEM; - } - } - - for(i=0; inum_frames-1; ++i) { - cam->buffers[i].next = &cam->buffers[i+1]; - cam->buffers[i].data = cam->frame_buffer +i*cam->frame_size; - cam->buffers[i].status = FRAME_EMPTY; - cam->buffers[i].length = 0; - cam->buffers[i].max_length = 0; - cam->buffers[i].num = i; - } - cam->buffers[i].next = cam->buffers; - cam->buffers[i].data = cam->frame_buffer +i*cam->frame_size; - cam->buffers[i].status = FRAME_EMPTY; - cam->buffers[i].length = 0; - cam->buffers[i].max_length = 0; - cam->buffers[i].num = i; - cam->curbuff = cam->buffers; - cam->workbuff = cam->curbuff->next; - DBG("buffers=%p, curbuff=%p, workbuff=%p\n", cam->buffers, cam->curbuff, - cam->workbuff); - return 0; -} - -/****************************************************************************** - * - * cpia2_free_buffers - * - *****************************************************************************/ -void cpia2_free_buffers(struct camera_data *cam) -{ - if(cam->buffers) { - kfree(cam->buffers); - cam->buffers = NULL; - } - if(cam->frame_buffer) { - rvfree(cam->frame_buffer, cam->frame_size*cam->num_frames); - cam->frame_buffer = NULL; - } -} - -/****************************************************************************** - * - * cpia2_read - * - *****************************************************************************/ -long cpia2_read(struct camera_data *cam, - char __user *buf, unsigned long count, int noblock) -{ - struct framebuf *frame; - - if (!count) - return 0; - - if (!buf) { - ERR("%s: buffer NULL\n",__func__); - return -EINVAL; - } - - if (!cam) { - ERR("%s: Internal error, camera_data NULL!\n",__func__); - return -EINVAL; - } - - if (!cam->streaming) { - /* Start streaming */ - cpia2_usb_stream_start(cam, - cam->params.camera_state.stream_mode); - } - - /* Copy cam->curbuff in case it changes while we're processing */ - frame = cam->curbuff; - if (noblock && frame->status != FRAME_READY) { - return -EAGAIN; - } - - if (frame->status != FRAME_READY) { - mutex_unlock(&cam->v4l2_lock); - wait_event_interruptible(cam->wq_stream, - !video_is_registered(&cam->vdev) || - (frame = cam->curbuff)->status == FRAME_READY); - mutex_lock(&cam->v4l2_lock); - if (signal_pending(current)) - return -ERESTARTSYS; - if (!video_is_registered(&cam->vdev)) - return 0; - } - - /* copy data to user space */ - if (frame->length > count) - return -EFAULT; - if (copy_to_user(buf, frame->data, frame->length)) - return -EFAULT; - - count = frame->length; - - frame->status = FRAME_EMPTY; - - return count; -} - -/****************************************************************************** - * - * cpia2_poll - * - *****************************************************************************/ -__poll_t cpia2_poll(struct camera_data *cam, struct file *filp, - poll_table *wait) -{ - __poll_t status = v4l2_ctrl_poll(filp, wait); - - if ((poll_requested_events(wait) & (EPOLLIN | EPOLLRDNORM)) && - !cam->streaming) { - /* Start streaming */ - cpia2_usb_stream_start(cam, - cam->params.camera_state.stream_mode); - } - - poll_wait(filp, &cam->wq_stream, wait); - - if (cam->curbuff->status == FRAME_READY) - status |= EPOLLIN | EPOLLRDNORM; - - return status; -} - -/****************************************************************************** - * - * cpia2_remap_buffer - * - *****************************************************************************/ -int cpia2_remap_buffer(struct camera_data *cam, struct vm_area_struct *vma) -{ - const char *adr = (const char *)vma->vm_start; - unsigned long size = vma->vm_end-vma->vm_start; - unsigned long start_offset = vma->vm_pgoff << PAGE_SHIFT; - unsigned long start = (unsigned long) adr; - unsigned long page, pos; - - DBG("mmap offset:%ld size:%ld\n", start_offset, size); - - if (!video_is_registered(&cam->vdev)) - return -ENODEV; - - if (size > cam->frame_size*cam->num_frames || - (start_offset % cam->frame_size) != 0 || - (start_offset+size > cam->frame_size*cam->num_frames)) - return -EINVAL; - - pos = ((unsigned long) (cam->frame_buffer)) + start_offset; - while (size > 0) { - page = kvirt_to_pa(pos); - if (remap_pfn_range(vma, start, page >> PAGE_SHIFT, PAGE_SIZE, PAGE_SHARED)) - return -EAGAIN; - start += PAGE_SIZE; - pos += PAGE_SIZE; - if (size > PAGE_SIZE) - size -= PAGE_SIZE; - else - size = 0; - } - - cam->mmapped = true; - return 0; -} diff --git a/drivers/staging/media/deprecated/cpia2/cpia2_registers.h b/drivers/staging/media/deprecated/cpia2/cpia2_registers.h deleted file mode 100644 index 8c73812a15c9..000000000000 --- a/drivers/staging/media/deprecated/cpia2/cpia2_registers.h +++ /dev/null @@ -1,463 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-or-later */ -/**************************************************************************** - * - * Filename: cpia2registers.h - * - * Copyright 2001, STMicrolectronics, Inc. - * - * Description: - * Definitions for the CPia2 register set - * - ****************************************************************************/ - -#ifndef CPIA2_REGISTER_HEADER -#define CPIA2_REGISTER_HEADER - -/*** - * System register set (Bank 0) - ***/ -#define CPIA2_SYSTEM_DEVICE_HI 0x00 -#define CPIA2_SYSTEM_DEVICE_LO 0x01 - -#define CPIA2_SYSTEM_SYSTEM_CONTROL 0x02 -#define CPIA2_SYSTEM_CONTROL_LOW_POWER 0x00 -#define CPIA2_SYSTEM_CONTROL_HIGH_POWER 0x01 -#define CPIA2_SYSTEM_CONTROL_SUSPEND 0x02 -#define CPIA2_SYSTEM_CONTROL_V2W_ERR 0x10 -#define CPIA2_SYSTEM_CONTROL_RB_ERR 0x10 -#define CPIA2_SYSTEM_CONTROL_CLEAR_ERR 0x80 - -#define CPIA2_SYSTEM_INT_PACKET_CTRL 0x04 -#define CPIA2_SYSTEM_INT_PACKET_CTRL_ENABLE_SW_XX 0x01 -#define CPIA2_SYSTEM_INT_PACKET_CTRL_ENABLE_EOF 0x02 -#define CPIA2_SYSTEM_INT_PACKET_CTRL_ENABLE_INT1 0x04 - -#define CPIA2_SYSTEM_CACHE_CTRL 0x05 -#define CPIA2_SYSTEM_CACHE_CTRL_CACHE_RESET 0x01 -#define CPIA2_SYSTEM_CACHE_CTRL_CACHE_FLUSH 0x02 - -#define CPIA2_SYSTEM_SERIAL_CTRL 0x06 -#define CPIA2_SYSTEM_SERIAL_CTRL_NULL_CMD 0x00 -#define CPIA2_SYSTEM_SERIAL_CTRL_START_CMD 0x01 -#define CPIA2_SYSTEM_SERIAL_CTRL_STOP_CMD 0x02 -#define CPIA2_SYSTEM_SERIAL_CTRL_WRITE_CMD 0x03 -#define CPIA2_SYSTEM_SERIAL_CTRL_READ_ACK_CMD 0x04 -#define CPIA2_SYSTEM_SERIAL_CTRL_READ_NACK_CMD 0x05 - -#define CPIA2_SYSTEM_SERIAL_DATA 0x07 - -#define CPIA2_SYSTEM_VP_SERIAL_ADDR 0x08 - -/*** - * I2C addresses for various devices in CPiA2 - ***/ -#define CPIA2_SYSTEM_VP_SERIAL_ADDR_SENSOR 0x20 -#define CPIA2_SYSTEM_VP_SERIAL_ADDR_VP 0x88 -#define CPIA2_SYSTEM_VP_SERIAL_ADDR_676_VP 0x8A - -#define CPIA2_SYSTEM_SPARE_REG1 0x09 -#define CPIA2_SYSTEM_SPARE_REG2 0x0A -#define CPIA2_SYSTEM_SPARE_REG3 0x0B - -#define CPIA2_SYSTEM_MC_PORT_0 0x0C -#define CPIA2_SYSTEM_MC_PORT_1 0x0D -#define CPIA2_SYSTEM_MC_PORT_2 0x0E -#define CPIA2_SYSTEM_MC_PORT_3 0x0F - -#define CPIA2_SYSTEM_STATUS_PKT 0x20 -#define CPIA2_SYSTEM_STATUS_PKT_END 0x27 - -#define CPIA2_SYSTEM_DESCRIP_VID_HI 0x30 -#define CPIA2_SYSTEM_DESCRIP_VID_LO 0x31 -#define CPIA2_SYSTEM_DESCRIP_PID_HI 0x32 -#define CPIA2_SYSTEM_DESCRIP_PID_LO 0x33 - -#define CPIA2_SYSTEM_FW_VERSION_HI 0x34 -#define CPIA2_SYSTEM_FW_VERSION_LO 0x35 - -#define CPIA2_SYSTEM_CACHE_START_INDEX 0x80 -#define CPIA2_SYSTEM_CACHE_MAX_WRITES 0x10 - -/*** - * VC register set (Bank 1) - ***/ -#define CPIA2_VC_ASIC_ID 0x80 - -#define CPIA2_VC_ASIC_REV 0x81 - -#define CPIA2_VC_PW_CTRL 0x82 -#define CPIA2_VC_PW_CTRL_COLDSTART 0x01 -#define CPIA2_VC_PW_CTRL_CP_CLK_EN 0x02 -#define CPIA2_VC_PW_CTRL_VP_RESET_N 0x04 -#define CPIA2_VC_PW_CTRL_VC_CLK_EN 0x08 -#define CPIA2_VC_PW_CTRL_VC_RESET_N 0x10 -#define CPIA2_VC_PW_CTRL_GOTO_SUSPEND 0x20 -#define CPIA2_VC_PW_CTRL_UDC_SUSPEND 0x40 -#define CPIA2_VC_PW_CTRL_PWR_DOWN 0x80 - -#define CPIA2_VC_WAKEUP 0x83 -#define CPIA2_VC_WAKEUP_SW_ENABLE 0x01 -#define CPIA2_VC_WAKEUP_XX_ENABLE 0x02 -#define CPIA2_VC_WAKEUP_SW_ATWAKEUP 0x04 -#define CPIA2_VC_WAKEUP_XX_ATWAKEUP 0x08 - -#define CPIA2_VC_CLOCK_CTRL 0x84 -#define CPIA2_VC_CLOCK_CTRL_TESTUP72 0x01 - -#define CPIA2_VC_INT_ENABLE 0x88 -#define CPIA2_VC_INT_ENABLE_XX_IE 0x01 -#define CPIA2_VC_INT_ENABLE_SW_IE 0x02 -#define CPIA2_VC_INT_ENABLE_VC_IE 0x04 -#define CPIA2_VC_INT_ENABLE_USBDATA_IE 0x08 -#define CPIA2_VC_INT_ENABLE_USBSETUP_IE 0x10 -#define CPIA2_VC_INT_ENABLE_USBCFG_IE 0x20 - -#define CPIA2_VC_INT_FLAG 0x89 -#define CPIA2_VC_INT_ENABLE_XX_FLAG 0x01 -#define CPIA2_VC_INT_ENABLE_SW_FLAG 0x02 -#define CPIA2_VC_INT_ENABLE_VC_FLAG 0x04 -#define CPIA2_VC_INT_ENABLE_USBDATA_FLAG 0x08 -#define CPIA2_VC_INT_ENABLE_USBSETUP_FLAG 0x10 -#define CPIA2_VC_INT_ENABLE_USBCFG_FLAG 0x20 -#define CPIA2_VC_INT_ENABLE_SET_RESET_BIT 0x80 - -#define CPIA2_VC_INT_STATE 0x8A -#define CPIA2_VC_INT_STATE_XX_STATE 0x01 -#define CPIA2_VC_INT_STATE_SW_STATE 0x02 - -#define CPIA2_VC_MP_DIR 0x90 -#define CPIA2_VC_MP_DIR_INPUT 0x00 -#define CPIA2_VC_MP_DIR_OUTPUT 0x01 - -#define CPIA2_VC_MP_DATA 0x91 - -#define CPIA2_VC_DP_CTRL 0x98 -#define CPIA2_VC_DP_CTRL_MODE_0 0x00 -#define CPIA2_VC_DP_CTRL_MODE_A 0x01 -#define CPIA2_VC_DP_CTRL_MODE_B 0x02 -#define CPIA2_VC_DP_CTRL_MODE_C 0x03 -#define CPIA2_VC_DP_CTRL_FAKE_FST 0x04 - -#define CPIA2_VC_AD_CTRL 0x99 -#define CPIA2_VC_AD_CTRL_SRC_0 0x00 -#define CPIA2_VC_AD_CTRL_SRC_DIGI_A 0x01 -#define CPIA2_VC_AD_CTRL_SRC_REG 0x02 -#define CPIA2_VC_AD_CTRL_DST_USB 0x00 -#define CPIA2_VC_AD_CTRL_DST_REG 0x04 - -#define CPIA2_VC_AD_TEST_IN 0x9B - -#define CPIA2_VC_AD_TEST_OUT 0x9C - -#define CPIA2_VC_AD_STATUS 0x9D -#define CPIA2_VC_AD_STATUS_EMPTY 0x01 -#define CPIA2_VC_AD_STATUS_FULL 0x02 - -#define CPIA2_VC_DP_DATA 0x9E - -#define CPIA2_VC_ST_CTRL 0xA0 -#define CPIA2_VC_ST_CTRL_SRC_VC 0x00 -#define CPIA2_VC_ST_CTRL_SRC_DP 0x01 -#define CPIA2_VC_ST_CTRL_SRC_REG 0x02 - -#define CPIA2_VC_ST_CTRL_RAW_SELECT 0x04 - -#define CPIA2_VC_ST_CTRL_DST_USB 0x00 -#define CPIA2_VC_ST_CTRL_DST_DP 0x08 -#define CPIA2_VC_ST_CTRL_DST_REG 0x10 - -#define CPIA2_VC_ST_CTRL_FIFO_ENABLE 0x20 -#define CPIA2_VC_ST_CTRL_EOF_DETECT 0x40 - -#define CPIA2_VC_ST_TEST 0xA1 -#define CPIA2_VC_ST_TEST_MODE_MANUAL 0x00 -#define CPIA2_VC_ST_TEST_MODE_INCREMENT 0x02 - -#define CPIA2_VC_ST_TEST_AUTO_FILL 0x08 - -#define CPIA2_VC_ST_TEST_REPEAT_FIFO 0x10 - -#define CPIA2_VC_ST_TEST_IN 0xA2 - -#define CPIA2_VC_ST_TEST_OUT 0xA3 - -#define CPIA2_VC_ST_STATUS 0xA4 -#define CPIA2_VC_ST_STATUS_EMPTY 0x01 -#define CPIA2_VC_ST_STATUS_FULL 0x02 - -#define CPIA2_VC_ST_FRAME_DETECT_1 0xA5 - -#define CPIA2_VC_ST_FRAME_DETECT_2 0xA6 - -#define CPIA2_VC_USB_CTRL 0xA8 -#define CPIA2_VC_USB_CTRL_CMD_STALLED 0x01 -#define CPIA2_VC_USB_CTRL_CMD_READY 0x02 -#define CPIA2_VC_USB_CTRL_CMD_STATUS 0x04 -#define CPIA2_VC_USB_CTRL_CMD_STATUS_DIR 0x08 -#define CPIA2_VC_USB_CTRL_CMD_NO_CLASH 0x10 -#define CPIA2_VC_USB_CTRL_CMD_MICRO_ACCESS 0x80 - -#define CPIA2_VC_USB_STRM 0xA9 -#define CPIA2_VC_USB_STRM_ISO_ENABLE 0x01 -#define CPIA2_VC_USB_STRM_BLK_ENABLE 0x02 -#define CPIA2_VC_USB_STRM_INT_ENABLE 0x04 -#define CPIA2_VC_USB_STRM_AUD_ENABLE 0x08 - -#define CPIA2_VC_USB_STATUS 0xAA -#define CPIA2_VC_USB_STATUS_CMD_IN_PROGRESS 0x01 -#define CPIA2_VC_USB_STATUS_CMD_STATUS_STALL 0x02 -#define CPIA2_VC_USB_STATUS_CMD_HANDSHAKE 0x04 -#define CPIA2_VC_USB_STATUS_CMD_OVERRIDE 0x08 -#define CPIA2_VC_USB_STATUS_CMD_FIFO_BUSY 0x10 -#define CPIA2_VC_USB_STATUS_BULK_REPEAT_TXN 0x20 -#define CPIA2_VC_USB_STATUS_CONFIG_DONE 0x40 -#define CPIA2_VC_USB_STATUS_USB_SUSPEND 0x80 - -#define CPIA2_VC_USB_CMDW 0xAB - -#define CPIA2_VC_USB_DATARW 0xAC - -#define CPIA2_VC_USB_INFO 0xAD - -#define CPIA2_VC_USB_CONFIG 0xAE - -#define CPIA2_VC_USB_SETTINGS 0xAF -#define CPIA2_VC_USB_SETTINGS_CONFIG_MASK 0x03 -#define CPIA2_VC_USB_SETTINGS_INTERFACE_MASK 0x0C -#define CPIA2_VC_USB_SETTINGS_ALTERNATE_MASK 0x70 - -#define CPIA2_VC_USB_ISOLIM 0xB0 - -#define CPIA2_VC_USB_ISOFAILS 0xB1 - -#define CPIA2_VC_USB_ISOMAXPKTHI 0xB2 - -#define CPIA2_VC_USB_ISOMAXPKTLO 0xB3 - -#define CPIA2_VC_V2W_CTRL 0xB8 -#define CPIA2_VC_V2W_SELECT 0x01 - -#define CPIA2_VC_V2W_SCL 0xB9 - -#define CPIA2_VC_V2W_SDA 0xBA - -#define CPIA2_VC_VC_CTRL 0xC0 -#define CPIA2_VC_VC_CTRL_RUN 0x01 -#define CPIA2_VC_VC_CTRL_SINGLESHOT 0x02 -#define CPIA2_VC_VC_CTRL_IDLING 0x04 -#define CPIA2_VC_VC_CTRL_INHIBIT_H_TABLES 0x10 -#define CPIA2_VC_VC_CTRL_INHIBIT_Q_TABLES 0x20 -#define CPIA2_VC_VC_CTRL_INHIBIT_PRIVATE 0x40 - -#define CPIA2_VC_VC_RESTART_IVAL_HI 0xC1 - -#define CPIA2_VC_VC_RESTART_IVAL_LO 0xC2 - -#define CPIA2_VC_VC_FORMAT 0xC3 -#define CPIA2_VC_VC_FORMAT_UFIRST 0x01 -#define CPIA2_VC_VC_FORMAT_MONO 0x02 -#define CPIA2_VC_VC_FORMAT_DECIMATING 0x04 -#define CPIA2_VC_VC_FORMAT_SHORTLINE 0x08 -#define CPIA2_VC_VC_FORMAT_SELFTEST 0x10 - -#define CPIA2_VC_VC_CLOCKS 0xC4 -#define CPIA2_VC_VC_CLOCKS_CLKDIV_MASK 0x03 -#define CPIA2_VC_VC_672_CLOCKS_CIF_DIV_BY_3 0x04 -#define CPIA2_VC_VC_672_CLOCKS_SCALING 0x08 -#define CPIA2_VC_VC_CLOCKS_LOGDIV0 0x00 -#define CPIA2_VC_VC_CLOCKS_LOGDIV1 0x01 -#define CPIA2_VC_VC_CLOCKS_LOGDIV2 0x02 -#define CPIA2_VC_VC_CLOCKS_LOGDIV3 0x03 -#define CPIA2_VC_VC_676_CLOCKS_CIF_DIV_BY_3 0x08 -#define CPIA2_VC_VC_676_CLOCKS_SCALING 0x10 - -#define CPIA2_VC_VC_IHSIZE_LO 0xC5 - -#define CPIA2_VC_VC_XLIM_HI 0xC6 - -#define CPIA2_VC_VC_XLIM_LO 0xC7 - -#define CPIA2_VC_VC_YLIM_HI 0xC8 - -#define CPIA2_VC_VC_YLIM_LO 0xC9 - -#define CPIA2_VC_VC_OHSIZE 0xCA - -#define CPIA2_VC_VC_OVSIZE 0xCB - -#define CPIA2_VC_VC_HCROP 0xCC - -#define CPIA2_VC_VC_VCROP 0xCD - -#define CPIA2_VC_VC_HPHASE 0xCE - -#define CPIA2_VC_VC_VPHASE 0xCF - -#define CPIA2_VC_VC_HISPAN 0xD0 - -#define CPIA2_VC_VC_VISPAN 0xD1 - -#define CPIA2_VC_VC_HICROP 0xD2 - -#define CPIA2_VC_VC_VICROP 0xD3 - -#define CPIA2_VC_VC_HFRACT 0xD4 -#define CPIA2_VC_VC_HFRACT_DEN_MASK 0x0F -#define CPIA2_VC_VC_HFRACT_NUM_MASK 0xF0 - -#define CPIA2_VC_VC_VFRACT 0xD5 -#define CPIA2_VC_VC_VFRACT_DEN_MASK 0x0F -#define CPIA2_VC_VC_VFRACT_NUM_MASK 0xF0 - -#define CPIA2_VC_VC_JPEG_OPT 0xD6 -#define CPIA2_VC_VC_JPEG_OPT_DOUBLE_SQUEEZE 0x01 -#define CPIA2_VC_VC_JPEG_OPT_NO_DC_AUTO_SQUEEZE 0x02 -#define CPIA2_VC_VC_JPEG_OPT_AUTO_SQUEEZE 0x04 -#define CPIA2_VC_VC_JPEG_OPT_DEFAULT (CPIA2_VC_VC_JPEG_OPT_DOUBLE_SQUEEZE|\ - CPIA2_VC_VC_JPEG_OPT_AUTO_SQUEEZE) - - -#define CPIA2_VC_VC_CREEP_PERIOD 0xD7 -#define CPIA2_VC_VC_USER_SQUEEZE 0xD8 -#define CPIA2_VC_VC_TARGET_KB 0xD9 - -#define CPIA2_VC_VC_AUTO_SQUEEZE 0xE6 - - -/*** - * VP register set (Bank 2) - ***/ -#define CPIA2_VP_DEVICEH 0 -#define CPIA2_VP_DEVICEL 1 - -#define CPIA2_VP_SYSTEMSTATE 0x02 -#define CPIA2_VP_SYSTEMSTATE_HK_ALIVE 0x01 - -#define CPIA2_VP_SYSTEMCTRL 0x03 -#define CPIA2_VP_SYSTEMCTRL_REQ_CLEAR_ERROR 0x80 -#define CPIA2_VP_SYSTEMCTRL_POWER_DOWN_PLL 0x20 -#define CPIA2_VP_SYSTEMCTRL_REQ_SUSPEND_STATE 0x10 -#define CPIA2_VP_SYSTEMCTRL_REQ_SERIAL_WAKEUP 0x08 -#define CPIA2_VP_SYSTEMCTRL_REQ_AUTOLOAD 0x04 -#define CPIA2_VP_SYSTEMCTRL_HK_CONTROL 0x02 -#define CPIA2_VP_SYSTEMCTRL_POWER_CONTROL 0x01 - -#define CPIA2_VP_SENSOR_FLAGS 0x05 -#define CPIA2_VP_SENSOR_FLAGS_404 0x01 -#define CPIA2_VP_SENSOR_FLAGS_407 0x02 -#define CPIA2_VP_SENSOR_FLAGS_409 0x04 -#define CPIA2_VP_SENSOR_FLAGS_410 0x08 -#define CPIA2_VP_SENSOR_FLAGS_500 0x10 - -#define CPIA2_VP_SENSOR_REV 0x06 - -#define CPIA2_VP_DEVICE_CONFIG 0x07 -#define CPIA2_VP_DEVICE_CONFIG_SERIAL_BRIDGE 0x01 - -#define CPIA2_VP_GPIO_DIRECTION 0x08 -#define CPIA2_VP_GPIO_READ 0xFF -#define CPIA2_VP_GPIO_WRITE 0x00 - -#define CPIA2_VP_GPIO_DATA 0x09 - -#define CPIA2_VP_RAM_ADDR_H 0x0A -#define CPIA2_VP_RAM_ADDR_L 0x0B -#define CPIA2_VP_RAM_DATA 0x0C - -#define CPIA2_VP_PATCH_REV 0x0F - -#define CPIA2_VP4_USER_MODE 0x10 -#define CPIA2_VP5_USER_MODE 0x13 -#define CPIA2_VP_USER_MODE_CIF 0x01 -#define CPIA2_VP_USER_MODE_QCIFDS 0x02 -#define CPIA2_VP_USER_MODE_QCIFPTC 0x04 -#define CPIA2_VP_USER_MODE_QVGADS 0x08 -#define CPIA2_VP_USER_MODE_QVGAPTC 0x10 -#define CPIA2_VP_USER_MODE_VGA 0x20 - -#define CPIA2_VP4_FRAMERATE_REQUEST 0x11 -#define CPIA2_VP5_FRAMERATE_REQUEST 0x14 -#define CPIA2_VP_FRAMERATE_60 0x80 -#define CPIA2_VP_FRAMERATE_50 0x40 -#define CPIA2_VP_FRAMERATE_30 0x20 -#define CPIA2_VP_FRAMERATE_25 0x10 -#define CPIA2_VP_FRAMERATE_15 0x08 -#define CPIA2_VP_FRAMERATE_12_5 0x04 -#define CPIA2_VP_FRAMERATE_7_5 0x02 -#define CPIA2_VP_FRAMERATE_6_25 0x01 - -#define CPIA2_VP4_USER_EFFECTS 0x12 -#define CPIA2_VP5_USER_EFFECTS 0x15 -#define CPIA2_VP_USER_EFFECTS_COLBARS 0x01 -#define CPIA2_VP_USER_EFFECTS_COLBARS_GRAD 0x02 -#define CPIA2_VP_USER_EFFECTS_MIRROR 0x04 -#define CPIA2_VP_USER_EFFECTS_FLIP 0x40 // VP5 only - -/* NOTE: CPIA2_VP_EXPOSURE_MODES shares the same register as VP5 User - * Effects */ -#define CPIA2_VP_EXPOSURE_MODES 0x15 -#define CPIA2_VP_EXPOSURE_MODES_INHIBIT_FLICKER 0x20 -#define CPIA2_VP_EXPOSURE_MODES_COMPILE_EXP 0x10 - -#define CPIA2_VP4_EXPOSURE_TARGET 0x16 // VP4 -#define CPIA2_VP5_EXPOSURE_TARGET 0x20 // VP5 - -#define CPIA2_VP_FLICKER_MODES 0x1B -#define CPIA2_VP_FLICKER_MODES_50HZ 0x80 -#define CPIA2_VP_FLICKER_MODES_CUSTOM_FLT_FFREQ 0x40 -#define CPIA2_VP_FLICKER_MODES_NEVER_FLICKER 0x20 -#define CPIA2_VP_FLICKER_MODES_INHIBIT_RUB 0x10 -#define CPIA2_VP_FLICKER_MODES_ADJUST_LINE_FREQ 0x08 -#define CPIA2_VP_FLICKER_MODES_CUSTOM_INT_FFREQ 0x04 - -#define CPIA2_VP_UMISC 0x1D -#define CPIA2_VP_UMISC_FORCE_MONO 0x80 -#define CPIA2_VP_UMISC_FORCE_ID_MASK 0x40 -#define CPIA2_VP_UMISC_INHIBIT_AUTO_FGS 0x20 -#define CPIA2_VP_UMISC_INHIBIT_AUTO_DIMS 0x08 -#define CPIA2_VP_UMISC_OPT_FOR_SENSOR_DS 0x04 -#define CPIA2_VP_UMISC_INHIBIT_AUTO_MODE_INT 0x02 - -#define CPIA2_VP5_ANTIFLKRSETUP 0x22 //34 - -#define CPIA2_VP_INTERPOLATION 0x24 -#define CPIA2_VP_INTERPOLATION_EVEN_FIRST 0x40 -#define CPIA2_VP_INTERPOLATION_HJOG 0x20 -#define CPIA2_VP_INTERPOLATION_VJOG 0x10 - -#define CPIA2_VP_GAMMA 0x25 -#define CPIA2_VP_DEFAULT_GAMMA 0x10 - -#define CPIA2_VP_YRANGE 0x26 - -#define CPIA2_VP_SATURATION 0x27 - -#define CPIA2_VP5_MYBLACK_LEVEL 0x3A //58 -#define CPIA2_VP5_MCYRANGE 0x3B //59 -#define CPIA2_VP5_MYCEILING 0x3C //60 -#define CPIA2_VP5_MCUVSATURATION 0x3D //61 - - -#define CPIA2_VP_REHASH_VALUES 0x60 - - -/*** - * Common sensor registers - ***/ -#define CPIA2_SENSOR_DEVICE_H 0x00 -#define CPIA2_SENSOR_DEVICE_L 0x01 - -#define CPIA2_SENSOR_DATA_FORMAT 0x16 -#define CPIA2_SENSOR_DATA_FORMAT_HMIRROR 0x08 -#define CPIA2_SENSOR_DATA_FORMAT_VMIRROR 0x10 - -#define CPIA2_SENSOR_CR1 0x76 -#define CPIA2_SENSOR_CR1_STAND_BY 0x01 -#define CPIA2_SENSOR_CR1_DOWN_RAMP_GEN 0x02 -#define CPIA2_SENSOR_CR1_DOWN_COLUMN_ADC 0x04 -#define CPIA2_SENSOR_CR1_DOWN_CAB_REGULATOR 0x08 -#define CPIA2_SENSOR_CR1_DOWN_AUDIO_REGULATOR 0x10 -#define CPIA2_SENSOR_CR1_DOWN_VRT_AMP 0x20 -#define CPIA2_SENSOR_CR1_DOWN_BAND_GAP 0x40 - -#endif diff --git a/drivers/staging/media/deprecated/cpia2/cpia2_usb.c b/drivers/staging/media/deprecated/cpia2/cpia2_usb.c deleted file mode 100644 index cba03b286473..000000000000 --- a/drivers/staging/media/deprecated/cpia2/cpia2_usb.c +++ /dev/null @@ -1,966 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/**************************************************************************** - * - * Filename: cpia2_usb.c - * - * Copyright 2001, STMicrolectronics, Inc. - * Contact: steve.miller@st.com - * - * Description: - * This is a USB driver for CPia2 based video cameras. - * The infrastructure of this driver is based on the cpia usb driver by - * Jochen Scharrlach and Johannes Erdfeldt. - * - * Stripped of 2.4 stuff ready for main kernel submit by - * Alan Cox - ****************************************************************************/ - -#include -#include -#include -#include - -#include "cpia2.h" - -static int frame_sizes[] = { - 0, // USBIF_CMDONLY - 0, // USBIF_BULK - 128, // USBIF_ISO_1 - 384, // USBIF_ISO_2 - 640, // USBIF_ISO_3 - 768, // USBIF_ISO_4 - 896, // USBIF_ISO_5 - 1023, // USBIF_ISO_6 -}; - -#define FRAMES_PER_DESC 10 -#define FRAME_SIZE_PER_DESC frame_sizes[cam->cur_alt] - -static void process_frame(struct camera_data *cam); -static void cpia2_usb_complete(struct urb *urb); -static int cpia2_usb_probe(struct usb_interface *intf, - const struct usb_device_id *id); -static void cpia2_usb_disconnect(struct usb_interface *intf); -static int cpia2_usb_suspend(struct usb_interface *intf, pm_message_t message); -static int cpia2_usb_resume(struct usb_interface *intf); - -static void free_sbufs(struct camera_data *cam); -static void add_APPn(struct camera_data *cam); -static void add_COM(struct camera_data *cam); -static int submit_urbs(struct camera_data *cam); -static int set_alternate(struct camera_data *cam, unsigned int alt); -static int configure_transfer_mode(struct camera_data *cam, unsigned int alt); - -static const struct usb_device_id cpia2_id_table[] = { - {USB_DEVICE(0x0553, 0x0100)}, - {USB_DEVICE(0x0553, 0x0140)}, - {USB_DEVICE(0x0553, 0x0151)}, /* STV0676 */ - {} /* Terminating entry */ -}; -MODULE_DEVICE_TABLE(usb, cpia2_id_table); - -static struct usb_driver cpia2_driver = { - .name = "cpia2", - .probe = cpia2_usb_probe, - .disconnect = cpia2_usb_disconnect, - .suspend = cpia2_usb_suspend, - .resume = cpia2_usb_resume, - .reset_resume = cpia2_usb_resume, - .id_table = cpia2_id_table -}; - - -/****************************************************************************** - * - * process_frame - * - *****************************************************************************/ -static void process_frame(struct camera_data *cam) -{ - static int frame_count; - - unsigned char *inbuff = cam->workbuff->data; - - DBG("Processing frame #%d, current:%d\n", - cam->workbuff->num, cam->curbuff->num); - - if(cam->workbuff->length > cam->workbuff->max_length) - cam->workbuff->max_length = cam->workbuff->length; - - if ((inbuff[0] == 0xFF) && (inbuff[1] == 0xD8)) { - frame_count++; - } else { - cam->workbuff->status = FRAME_ERROR; - DBG("Start of frame not found\n"); - return; - } - - /*** - * Now the output buffer should have a JPEG image in it. - ***/ - if(!cam->first_image_seen) { - /* Always skip the first image after streaming - * starts. It is almost certainly corrupt. */ - cam->first_image_seen = 1; - cam->workbuff->status = FRAME_EMPTY; - return; - } - if (cam->workbuff->length > 3) { - if(cam->mmapped && - cam->workbuff->length < cam->workbuff->max_length) { - /* No junk in the buffers */ - memset(cam->workbuff->data+cam->workbuff->length, - 0, cam->workbuff->max_length- - cam->workbuff->length); - } - cam->workbuff->max_length = cam->workbuff->length; - cam->workbuff->status = FRAME_READY; - - if(!cam->mmapped && cam->num_frames > 2) { - /* During normal reading, the most recent - * frame will be read. If the current frame - * hasn't started reading yet, it will never - * be read, so mark it empty. If the buffer is - * mmapped, or we have few buffers, we need to - * wait for the user to free the buffer. - * - * NOTE: This is not entirely foolproof with 3 - * buffers, but it would take an EXTREMELY - * overloaded system to cause problems (possible - * image data corruption). Basically, it would - * need to take more time to execute cpia2_read - * than it would for the camera to send - * cam->num_frames-2 frames before problems - * could occur. - */ - cam->curbuff->status = FRAME_EMPTY; - } - cam->curbuff = cam->workbuff; - cam->workbuff = cam->workbuff->next; - DBG("Changed buffers, work:%d, current:%d\n", - cam->workbuff->num, cam->curbuff->num); - return; - } else { - DBG("Not enough data for an image.\n"); - } - - cam->workbuff->status = FRAME_ERROR; - return; -} - -/****************************************************************************** - * - * add_APPn - * - * Adds a user specified APPn record - *****************************************************************************/ -static void add_APPn(struct camera_data *cam) -{ - if(cam->APP_len > 0) { - cam->workbuff->data[cam->workbuff->length++] = 0xFF; - cam->workbuff->data[cam->workbuff->length++] = 0xE0+cam->APPn; - cam->workbuff->data[cam->workbuff->length++] = 0; - cam->workbuff->data[cam->workbuff->length++] = cam->APP_len+2; - memcpy(cam->workbuff->data+cam->workbuff->length, - cam->APP_data, cam->APP_len); - cam->workbuff->length += cam->APP_len; - } -} - -/****************************************************************************** - * - * add_COM - * - * Adds a user specified COM record - *****************************************************************************/ -static void add_COM(struct camera_data *cam) -{ - if(cam->COM_len > 0) { - cam->workbuff->data[cam->workbuff->length++] = 0xFF; - cam->workbuff->data[cam->workbuff->length++] = 0xFE; - cam->workbuff->data[cam->workbuff->length++] = 0; - cam->workbuff->data[cam->workbuff->length++] = cam->COM_len+2; - memcpy(cam->workbuff->data+cam->workbuff->length, - cam->COM_data, cam->COM_len); - cam->workbuff->length += cam->COM_len; - } -} - -/****************************************************************************** - * - * cpia2_usb_complete - * - * callback when incoming packet is received - *****************************************************************************/ -static void cpia2_usb_complete(struct urb *urb) -{ - int i; - unsigned char *cdata; - static bool frame_ready = false; - struct camera_data *cam = (struct camera_data *) urb->context; - - if (urb->status!=0) { - if (!(urb->status == -ENOENT || - urb->status == -ECONNRESET || - urb->status == -ESHUTDOWN)) - { - DBG("urb->status = %d!\n", urb->status); - } - DBG("Stopping streaming\n"); - return; - } - - if (!cam->streaming || !video_is_registered(&cam->vdev)) { - LOG("Will now stop the streaming: streaming = %d, present=%d\n", - cam->streaming, video_is_registered(&cam->vdev)); - return; - } - - /*** - * Packet collater - ***/ - //DBG("Collating %d packets\n", urb->number_of_packets); - for (i = 0; i < urb->number_of_packets; i++) { - u16 checksum, iso_checksum; - int j; - int n = urb->iso_frame_desc[i].actual_length; - int st = urb->iso_frame_desc[i].status; - - if(cam->workbuff->status == FRAME_READY) { - struct framebuf *ptr; - /* Try to find an available buffer */ - DBG("workbuff full, searching\n"); - for (ptr = cam->workbuff->next; - ptr != cam->workbuff; - ptr = ptr->next) - { - if (ptr->status == FRAME_EMPTY) { - ptr->status = FRAME_READING; - ptr->length = 0; - break; - } - } - if (ptr == cam->workbuff) - break; /* No READING or EMPTY buffers left */ - - cam->workbuff = ptr; - } - - if (cam->workbuff->status == FRAME_EMPTY || - cam->workbuff->status == FRAME_ERROR) { - cam->workbuff->status = FRAME_READING; - cam->workbuff->length = 0; - } - - //DBG(" Packet %d length = %d, status = %d\n", i, n, st); - cdata = urb->transfer_buffer + urb->iso_frame_desc[i].offset; - - if (st) { - LOG("cpia2 data error: [%d] len=%d, status = %d\n", - i, n, st); - if(!ALLOW_CORRUPT) - cam->workbuff->status = FRAME_ERROR; - continue; - } - - if(n<=2) - continue; - - checksum = 0; - for(j=0; jworkbuff->status = FRAME_ERROR; - continue; - } - } - n -= 2; - - if(cam->workbuff->status != FRAME_READING) { - if((0xFF == cdata[0] && 0xD8 == cdata[1]) || - (0xD8 == cdata[0] && 0xFF == cdata[1] && - 0 != cdata[2])) { - /* frame is skipped, but increment total - * frame count anyway */ - cam->frame_count++; - } - DBG("workbuff not reading, status=%d\n", - cam->workbuff->status); - continue; - } - - if (cam->frame_size < cam->workbuff->length + n) { - ERR("buffer overflow! length: %d, n: %d\n", - cam->workbuff->length, n); - cam->workbuff->status = FRAME_ERROR; - if(cam->workbuff->length > cam->workbuff->max_length) - cam->workbuff->max_length = - cam->workbuff->length; - continue; - } - - if (cam->workbuff->length == 0) { - int data_offset; - if ((0xD8 == cdata[0]) && (0xFF == cdata[1])) { - data_offset = 1; - } else if((0xFF == cdata[0]) && (0xD8 == cdata[1]) - && (0xFF == cdata[2])) { - data_offset = 2; - } else { - DBG("Ignoring packet, not beginning!\n"); - continue; - } - DBG("Start of frame pattern found\n"); - cam->workbuff->ts = ktime_get_ns(); - cam->workbuff->seq = cam->frame_count++; - cam->workbuff->data[0] = 0xFF; - cam->workbuff->data[1] = 0xD8; - cam->workbuff->length = 2; - add_APPn(cam); - add_COM(cam); - memcpy(cam->workbuff->data+cam->workbuff->length, - cdata+data_offset, n-data_offset); - cam->workbuff->length += n-data_offset; - } else if (cam->workbuff->length > 0) { - memcpy(cam->workbuff->data + cam->workbuff->length, - cdata, n); - cam->workbuff->length += n; - } - - if ((cam->workbuff->length >= 3) && - (cam->workbuff->data[cam->workbuff->length - 3] == 0xFF) && - (cam->workbuff->data[cam->workbuff->length - 2] == 0xD9) && - (cam->workbuff->data[cam->workbuff->length - 1] == 0xFF)) { - frame_ready = true; - cam->workbuff->data[cam->workbuff->length - 1] = 0; - cam->workbuff->length -= 1; - } else if ((cam->workbuff->length >= 2) && - (cam->workbuff->data[cam->workbuff->length - 2] == 0xFF) && - (cam->workbuff->data[cam->workbuff->length - 1] == 0xD9)) { - frame_ready = true; - } - - if (frame_ready) { - DBG("Workbuff image size = %d\n",cam->workbuff->length); - process_frame(cam); - - frame_ready = false; - - if (waitqueue_active(&cam->wq_stream)) - wake_up_interruptible(&cam->wq_stream); - } - } - - if(cam->streaming) { - /* resubmit */ - urb->dev = cam->dev; - if ((i = usb_submit_urb(urb, GFP_ATOMIC)) != 0) - ERR("%s: usb_submit_urb ret %d!\n", __func__, i); - } -} - -/****************************************************************************** - * - * configure_transfer_mode - * - *****************************************************************************/ -static int configure_transfer_mode(struct camera_data *cam, unsigned int alt) -{ - static unsigned char iso_regs[8][4] = { - {0x00, 0x00, 0x00, 0x00}, - {0x00, 0x00, 0x00, 0x00}, - {0xB9, 0x00, 0x00, 0x7E}, - {0xB9, 0x00, 0x01, 0x7E}, - {0xB9, 0x00, 0x02, 0x7E}, - {0xB9, 0x00, 0x02, 0xFE}, - {0xB9, 0x00, 0x03, 0x7E}, - {0xB9, 0x00, 0x03, 0xFD} - }; - struct cpia2_command cmd; - unsigned char reg; - - if (!video_is_registered(&cam->vdev)) - return -ENODEV; - - /*** - * Write the isoc registers according to the alternate selected - ***/ - cmd.direction = TRANSFER_WRITE; - cmd.buffer.block_data[0] = iso_regs[alt][0]; - cmd.buffer.block_data[1] = iso_regs[alt][1]; - cmd.buffer.block_data[2] = iso_regs[alt][2]; - cmd.buffer.block_data[3] = iso_regs[alt][3]; - cmd.req_mode = CAMERAACCESS_TYPE_BLOCK | CAMERAACCESS_VC; - cmd.start = CPIA2_VC_USB_ISOLIM; - cmd.reg_count = 4; - cpia2_send_command(cam, &cmd); - - /*** - * Enable relevant streams before starting polling. - * First read USB Stream Config Register. - ***/ - cmd.direction = TRANSFER_READ; - cmd.req_mode = CAMERAACCESS_TYPE_BLOCK | CAMERAACCESS_VC; - cmd.start = CPIA2_VC_USB_STRM; - cmd.reg_count = 1; - cpia2_send_command(cam, &cmd); - reg = cmd.buffer.block_data[0]; - - /* Clear iso, bulk, and int */ - reg &= ~(CPIA2_VC_USB_STRM_BLK_ENABLE | - CPIA2_VC_USB_STRM_ISO_ENABLE | - CPIA2_VC_USB_STRM_INT_ENABLE); - - if (alt == USBIF_BULK) { - DBG("Enabling bulk xfer\n"); - reg |= CPIA2_VC_USB_STRM_BLK_ENABLE; /* Enable Bulk */ - cam->xfer_mode = XFER_BULK; - } else if (alt >= USBIF_ISO_1) { - DBG("Enabling ISOC xfer\n"); - reg |= CPIA2_VC_USB_STRM_ISO_ENABLE; - cam->xfer_mode = XFER_ISOC; - } - - cmd.buffer.block_data[0] = reg; - cmd.direction = TRANSFER_WRITE; - cmd.start = CPIA2_VC_USB_STRM; - cmd.reg_count = 1; - cmd.req_mode = CAMERAACCESS_TYPE_BLOCK | CAMERAACCESS_VC; - cpia2_send_command(cam, &cmd); - - return 0; -} - -/****************************************************************************** - * - * cpia2_usb_change_streaming_alternate - * - *****************************************************************************/ -int cpia2_usb_change_streaming_alternate(struct camera_data *cam, - unsigned int alt) -{ - int ret = 0; - - if(alt < USBIF_ISO_1 || alt > USBIF_ISO_6) - return -EINVAL; - - if(alt == cam->params.camera_state.stream_mode) - return 0; - - cpia2_usb_stream_pause(cam); - - configure_transfer_mode(cam, alt); - - cam->params.camera_state.stream_mode = alt; - - /* Reset the camera to prevent image quality degradation */ - cpia2_reset_camera(cam); - - cpia2_usb_stream_resume(cam); - - return ret; -} - -/****************************************************************************** - * - * set_alternate - * - *****************************************************************************/ -static int set_alternate(struct camera_data *cam, unsigned int alt) -{ - int ret = 0; - - if(alt == cam->cur_alt) - return 0; - - if (cam->cur_alt != USBIF_CMDONLY) { - DBG("Changing from alt %d to %d\n", cam->cur_alt, USBIF_CMDONLY); - ret = usb_set_interface(cam->dev, cam->iface, USBIF_CMDONLY); - if (ret != 0) - return ret; - } - if (alt != USBIF_CMDONLY) { - DBG("Changing from alt %d to %d\n", USBIF_CMDONLY, alt); - ret = usb_set_interface(cam->dev, cam->iface, alt); - if (ret != 0) - return ret; - } - - cam->old_alt = cam->cur_alt; - cam->cur_alt = alt; - - return ret; -} - -/****************************************************************************** - * - * free_sbufs - * - * Free all cam->sbuf[]. All non-NULL .data and .urb members that are non-NULL - * are assumed to be allocated. Non-NULL .urb members are also assumed to be - * submitted (and must therefore be killed before they are freed). - *****************************************************************************/ -static void free_sbufs(struct camera_data *cam) -{ - int i; - - for (i = 0; i < NUM_SBUF; i++) { - if(cam->sbuf[i].urb) { - usb_kill_urb(cam->sbuf[i].urb); - usb_free_urb(cam->sbuf[i].urb); - cam->sbuf[i].urb = NULL; - } - if(cam->sbuf[i].data) { - kfree(cam->sbuf[i].data); - cam->sbuf[i].data = NULL; - } - } -} - -/******* -* Convenience functions -*******/ -/**************************************************************************** - * - * write_packet - * - ***************************************************************************/ -static int write_packet(struct usb_device *udev, - u8 request, u8 * registers, u16 start, size_t size) -{ - unsigned char *buf; - int ret; - - if (!registers || size <= 0) - return -EINVAL; - - buf = kmemdup(registers, size, GFP_KERNEL); - if (!buf) - return -ENOMEM; - - ret = usb_control_msg(udev, - usb_sndctrlpipe(udev, 0), - request, - USB_TYPE_VENDOR | USB_RECIP_DEVICE, - start, /* value */ - 0, /* index */ - buf, /* buffer */ - size, - 1000); - - kfree(buf); - return ret; -} - -/**************************************************************************** - * - * read_packet - * - ***************************************************************************/ -static int read_packet(struct usb_device *udev, - u8 request, u8 * registers, u16 start, size_t size) -{ - unsigned char *buf; - int ret; - - if (!registers || size <= 0) - return -EINVAL; - - buf = kmalloc(size, GFP_KERNEL); - if (!buf) - return -ENOMEM; - - ret = usb_control_msg(udev, - usb_rcvctrlpipe(udev, 0), - request, - USB_DIR_IN|USB_TYPE_VENDOR|USB_RECIP_DEVICE, - start, /* value */ - 0, /* index */ - buf, /* buffer */ - size, - 1000); - - if (ret >= 0) - memcpy(registers, buf, size); - - kfree(buf); - - return ret; -} - -/****************************************************************************** - * - * cpia2_usb_transfer_cmd - * - *****************************************************************************/ -int cpia2_usb_transfer_cmd(struct camera_data *cam, - void *registers, - u8 request, u8 start, u8 count, u8 direction) -{ - int err = 0; - struct usb_device *udev = cam->dev; - - if (!udev) { - ERR("%s: Internal driver error: udev is NULL\n", __func__); - return -EINVAL; - } - - if (!registers) { - ERR("%s: Internal driver error: register array is NULL\n", __func__); - return -EINVAL; - } - - if (direction == TRANSFER_READ) { - err = read_packet(udev, request, (u8 *)registers, start, count); - if (err > 0) - err = 0; - } else if (direction == TRANSFER_WRITE) { - err =write_packet(udev, request, (u8 *)registers, start, count); - if (err < 0) { - LOG("Control message failed, err val = %d\n", err); - LOG("Message: request = 0x%0X, start = 0x%0X\n", - request, start); - LOG("Message: count = %d, register[0] = 0x%0X\n", - count, ((unsigned char *) registers)[0]); - } else - err=0; - } else { - LOG("Unexpected first byte of direction: %d\n", - direction); - return -EINVAL; - } - - if(err != 0) - LOG("Unexpected error: %d\n", err); - return err; -} - - -/****************************************************************************** - * - * submit_urbs - * - *****************************************************************************/ -static int submit_urbs(struct camera_data *cam) -{ - struct urb *urb; - int fx, err, i, j; - - for(i=0; isbuf[i].data) - continue; - cam->sbuf[i].data = - kmalloc_array(FRAME_SIZE_PER_DESC, FRAMES_PER_DESC, - GFP_KERNEL); - if (!cam->sbuf[i].data) { - while (--i >= 0) { - kfree(cam->sbuf[i].data); - cam->sbuf[i].data = NULL; - } - return -ENOMEM; - } - } - - /* We double buffer the Isoc lists, and also know the polling - * interval is every frame (1 == (1 << (bInterval -1))). - */ - for(i=0; isbuf[i].urb) { - continue; - } - urb = usb_alloc_urb(FRAMES_PER_DESC, GFP_KERNEL); - if (!urb) { - for (j = 0; j < i; j++) - usb_free_urb(cam->sbuf[j].urb); - for (j = 0; j < NUM_SBUF; j++) { - kfree(cam->sbuf[j].data); - cam->sbuf[j].data = NULL; - } - return -ENOMEM; - } - - cam->sbuf[i].urb = urb; - urb->dev = cam->dev; - urb->context = cam; - urb->pipe = usb_rcvisocpipe(cam->dev, 1 /*ISOC endpoint*/); - urb->transfer_flags = URB_ISO_ASAP; - urb->transfer_buffer = cam->sbuf[i].data; - urb->complete = cpia2_usb_complete; - urb->number_of_packets = FRAMES_PER_DESC; - urb->interval = 1; - urb->transfer_buffer_length = - FRAME_SIZE_PER_DESC * FRAMES_PER_DESC; - - for (fx = 0; fx < FRAMES_PER_DESC; fx++) { - urb->iso_frame_desc[fx].offset = - FRAME_SIZE_PER_DESC * fx; - urb->iso_frame_desc[fx].length = FRAME_SIZE_PER_DESC; - } - } - - - /* Queue the ISO urbs, and resubmit in the completion handler */ - for(i=0; isbuf[i].urb, GFP_KERNEL); - if (err) { - ERR("usb_submit_urb[%d]() = %d\n", i, err); - return err; - } - } - - return 0; -} - -/****************************************************************************** - * - * cpia2_usb_stream_start - * - *****************************************************************************/ -int cpia2_usb_stream_start(struct camera_data *cam, unsigned int alternate) -{ - int ret; - int old_alt; - - if(cam->streaming) - return 0; - - if (cam->flush) { - int i; - DBG("Flushing buffers\n"); - for(i=0; inum_frames; ++i) { - cam->buffers[i].status = FRAME_EMPTY; - cam->buffers[i].length = 0; - } - cam->curbuff = &cam->buffers[0]; - cam->workbuff = cam->curbuff->next; - cam->flush = false; - } - - old_alt = cam->params.camera_state.stream_mode; - cam->params.camera_state.stream_mode = 0; - ret = cpia2_usb_change_streaming_alternate(cam, alternate); - if (ret < 0) { - int ret2; - ERR("cpia2_usb_change_streaming_alternate() = %d!\n", ret); - cam->params.camera_state.stream_mode = old_alt; - ret2 = set_alternate(cam, USBIF_CMDONLY); - if (ret2 < 0) { - ERR("cpia2_usb_change_streaming_alternate(%d) =%d has already failed. Then tried to call set_alternate(USBIF_CMDONLY) = %d.\n", - alternate, ret, ret2); - } - } else { - cam->frame_count = 0; - cam->streaming = 1; - ret = cpia2_usb_stream_resume(cam); - } - return ret; -} - -/****************************************************************************** - * - * cpia2_usb_stream_pause - * - *****************************************************************************/ -int cpia2_usb_stream_pause(struct camera_data *cam) -{ - int ret = 0; - if(cam->streaming) { - free_sbufs(cam); - ret = set_alternate(cam, USBIF_CMDONLY); - } - return ret; -} - -/****************************************************************************** - * - * cpia2_usb_stream_resume - * - *****************************************************************************/ -int cpia2_usb_stream_resume(struct camera_data *cam) -{ - int ret = 0; - if(cam->streaming) { - cam->first_image_seen = 0; - ret = set_alternate(cam, cam->params.camera_state.stream_mode); - if(ret == 0) { - /* for some reason the user effects need to be set - again when starting streaming. */ - cpia2_do_command(cam, CPIA2_CMD_SET_USER_EFFECTS, TRANSFER_WRITE, - cam->params.vp_params.user_effects); - ret = submit_urbs(cam); - } - } - return ret; -} - -/****************************************************************************** - * - * cpia2_usb_stream_stop - * - *****************************************************************************/ -int cpia2_usb_stream_stop(struct camera_data *cam) -{ - int ret; - - ret = cpia2_usb_stream_pause(cam); - cam->streaming = 0; - configure_transfer_mode(cam, 0); - return ret; -} - -/****************************************************************************** - * - * cpia2_usb_probe - * - * Probe and initialize. - *****************************************************************************/ -static int cpia2_usb_probe(struct usb_interface *intf, - const struct usb_device_id *id) -{ - struct usb_device *udev = interface_to_usbdev(intf); - struct usb_interface_descriptor *interface; - struct camera_data *cam; - int ret; - - /* A multi-config CPiA2 camera? */ - if (udev->descriptor.bNumConfigurations != 1) - return -ENODEV; - interface = &intf->cur_altsetting->desc; - - /* If we get to this point, we found a CPiA2 camera */ - LOG("CPiA2 USB camera found\n"); - - cam = cpia2_init_camera_struct(intf); - if (cam == NULL) - return -ENOMEM; - - cam->dev = udev; - cam->iface = interface->bInterfaceNumber; - - ret = set_alternate(cam, USBIF_CMDONLY); - if (ret < 0) { - ERR("%s: usb_set_interface error (ret = %d)\n", __func__, ret); - goto alt_err; - } - - - if((ret = cpia2_init_camera(cam)) < 0) { - ERR("%s: failed to initialize cpia2 camera (ret = %d)\n", __func__, ret); - goto alt_err; - } - LOG(" CPiA Version: %d.%02d (%d.%d)\n", - cam->params.version.firmware_revision_hi, - cam->params.version.firmware_revision_lo, - cam->params.version.asic_id, - cam->params.version.asic_rev); - LOG(" CPiA PnP-ID: %04x:%04x:%04x\n", - cam->params.pnp_id.vendor, - cam->params.pnp_id.product, - cam->params.pnp_id.device_revision); - LOG(" SensorID: %d.(version %d)\n", - cam->params.version.sensor_flags, - cam->params.version.sensor_rev); - - usb_set_intfdata(intf, cam); - - ret = cpia2_register_camera(cam); - if (ret < 0) { - ERR("%s: Failed to register cpia2 camera (ret = %d)\n", __func__, ret); - goto alt_err; - } - - return 0; - -alt_err: - cpia2_deinit_camera_struct(cam, intf); - return ret; -} - -/****************************************************************************** - * - * cpia2_disconnect - * - *****************************************************************************/ -static void cpia2_usb_disconnect(struct usb_interface *intf) -{ - struct camera_data *cam = usb_get_intfdata(intf); - usb_set_intfdata(intf, NULL); - - DBG("Stopping stream\n"); - cpia2_usb_stream_stop(cam); - - mutex_lock(&cam->v4l2_lock); - DBG("Unregistering camera\n"); - cpia2_unregister_camera(cam); - v4l2_device_disconnect(&cam->v4l2_dev); - mutex_unlock(&cam->v4l2_lock); - - if(cam->buffers) { - DBG("Wakeup waiting processes\n"); - cam->curbuff->status = FRAME_READY; - cam->curbuff->length = 0; - wake_up_interruptible(&cam->wq_stream); - } - - v4l2_device_put(&cam->v4l2_dev); - - LOG("CPiA2 camera disconnected.\n"); -} - -static int cpia2_usb_suspend(struct usb_interface *intf, pm_message_t message) -{ - struct camera_data *cam = usb_get_intfdata(intf); - - mutex_lock(&cam->v4l2_lock); - if (cam->streaming) { - cpia2_usb_stream_stop(cam); - cam->streaming = 1; - } - mutex_unlock(&cam->v4l2_lock); - - dev_info(&intf->dev, "going into suspend..\n"); - return 0; -} - -/* Resume device - start device. */ -static int cpia2_usb_resume(struct usb_interface *intf) -{ - struct camera_data *cam = usb_get_intfdata(intf); - - mutex_lock(&cam->v4l2_lock); - v4l2_ctrl_handler_setup(&cam->hdl); - if (cam->streaming) { - cam->streaming = 0; - cpia2_usb_stream_start(cam, - cam->params.camera_state.stream_mode); - } - mutex_unlock(&cam->v4l2_lock); - - dev_info(&intf->dev, "coming out of suspend..\n"); - return 0; -} - -/****************************************************************************** - * - * usb_cpia2_init - * - *****************************************************************************/ -int cpia2_usb_init(void) -{ - return usb_register(&cpia2_driver); -} - -/****************************************************************************** - * - * usb_cpia_cleanup - * - *****************************************************************************/ -void cpia2_usb_cleanup(void) -{ - schedule_timeout(2 * HZ); - usb_deregister(&cpia2_driver); -} diff --git a/drivers/staging/media/deprecated/cpia2/cpia2_v4l.c b/drivers/staging/media/deprecated/cpia2/cpia2_v4l.c deleted file mode 100644 index 926ecfc9b64a..000000000000 --- a/drivers/staging/media/deprecated/cpia2/cpia2_v4l.c +++ /dev/null @@ -1,1226 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/**************************************************************************** - * - * Filename: cpia2_v4l.c - * - * Copyright 2001, STMicrolectronics, Inc. - * Contact: steve.miller@st.com - * Copyright 2001,2005, Scott J. Bertin - * - * Description: - * This is a USB driver for CPia2 based video cameras. - * The infrastructure of this driver is based on the cpia usb driver by - * Jochen Scharrlach and Johannes Erdfeldt. - * - * Stripped of 2.4 stuff ready for main kernel submit by - * Alan Cox - ****************************************************************************/ - -#define CPIA_VERSION "3.0.1" - -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include "cpia2.h" - -static int video_nr = -1; -module_param(video_nr, int, 0); -MODULE_PARM_DESC(video_nr, "video device to register (0=/dev/video0, etc)"); - -static int buffer_size = 68 * 1024; -module_param(buffer_size, int, 0); -MODULE_PARM_DESC(buffer_size, "Size for each frame buffer in bytes (default 68k)"); - -static int num_buffers = 3; -module_param(num_buffers, int, 0); -MODULE_PARM_DESC(num_buffers, "Number of frame buffers (1-" - __stringify(VIDEO_MAX_FRAME) ", default 3)"); - -static int alternate = DEFAULT_ALT; -module_param(alternate, int, 0); -MODULE_PARM_DESC(alternate, "USB Alternate (" __stringify(USBIF_ISO_1) "-" - __stringify(USBIF_ISO_6) ", default " - __stringify(DEFAULT_ALT) ")"); - -static int flicker_mode; -module_param(flicker_mode, int, 0); -MODULE_PARM_DESC(flicker_mode, "Flicker frequency (0 (disabled), " __stringify(50) " or " - __stringify(60) ", default 0)"); - -MODULE_AUTHOR("Steve Miller (STMicroelectronics) "); -MODULE_DESCRIPTION("V4L-driver for STMicroelectronics CPiA2 based cameras"); -MODULE_LICENSE("GPL"); -MODULE_VERSION(CPIA_VERSION); - -#define ABOUT "V4L-Driver for Vision CPiA2 based cameras" -#define CPIA2_CID_USB_ALT (V4L2_CID_USER_BASE | 0xf000) - -/****************************************************************************** - * - * cpia2_open - * - *****************************************************************************/ -static int cpia2_open(struct file *file) -{ - struct camera_data *cam = video_drvdata(file); - int retval; - - if (mutex_lock_interruptible(&cam->v4l2_lock)) - return -ERESTARTSYS; - retval = v4l2_fh_open(file); - if (retval) - goto open_unlock; - - if (v4l2_fh_is_singular_file(file)) { - if (cpia2_allocate_buffers(cam)) { - v4l2_fh_release(file); - retval = -ENOMEM; - goto open_unlock; - } - - /* reset the camera */ - if (cpia2_reset_camera(cam) < 0) { - v4l2_fh_release(file); - retval = -EIO; - goto open_unlock; - } - - cam->APP_len = 0; - cam->COM_len = 0; - } - - cpia2_dbg_dump_registers(cam); -open_unlock: - mutex_unlock(&cam->v4l2_lock); - return retval; -} - -/****************************************************************************** - * - * cpia2_close - * - *****************************************************************************/ -static int cpia2_close(struct file *file) -{ - struct video_device *dev = video_devdata(file); - struct camera_data *cam = video_get_drvdata(dev); - - mutex_lock(&cam->v4l2_lock); - if (video_is_registered(&cam->vdev) && v4l2_fh_is_singular_file(file)) { - cpia2_usb_stream_stop(cam); - - /* save camera state for later open */ - cpia2_save_camera_state(cam); - - cpia2_set_low_power(cam); - cpia2_free_buffers(cam); - } - - if (cam->stream_fh == file->private_data) { - cam->stream_fh = NULL; - cam->mmapped = 0; - } - mutex_unlock(&cam->v4l2_lock); - return v4l2_fh_release(file); -} - -/****************************************************************************** - * - * cpia2_v4l_read - * - *****************************************************************************/ -static ssize_t cpia2_v4l_read(struct file *file, char __user *buf, size_t count, - loff_t *off) -{ - struct camera_data *cam = video_drvdata(file); - int noblock = file->f_flags & O_NONBLOCK; - ssize_t ret; - - if (!cam) - return -EINVAL; - - if (mutex_lock_interruptible(&cam->v4l2_lock)) - return -ERESTARTSYS; - ret = cpia2_read(cam, buf, count, noblock); - mutex_unlock(&cam->v4l2_lock); - return ret; -} - -/****************************************************************************** - * - * cpia2_v4l_poll - * - *****************************************************************************/ -static __poll_t cpia2_v4l_poll(struct file *filp, struct poll_table_struct *wait) -{ - struct camera_data *cam = video_drvdata(filp); - __poll_t res; - - mutex_lock(&cam->v4l2_lock); - res = cpia2_poll(cam, filp, wait); - mutex_unlock(&cam->v4l2_lock); - return res; -} - -static int sync(struct camera_data *cam, int frame_nr) -{ - struct framebuf *frame = &cam->buffers[frame_nr]; - - while (1) { - if (frame->status == FRAME_READY) - return 0; - - if (!cam->streaming) { - frame->status = FRAME_READY; - frame->length = 0; - return 0; - } - - mutex_unlock(&cam->v4l2_lock); - wait_event_interruptible(cam->wq_stream, - !cam->streaming || - frame->status == FRAME_READY); - mutex_lock(&cam->v4l2_lock); - if (signal_pending(current)) - return -ERESTARTSYS; - if (!video_is_registered(&cam->vdev)) - return -ENOTTY; - } -} - -/****************************************************************************** - * - * ioctl_querycap - * - * V4L2 device capabilities - * - *****************************************************************************/ - -static int cpia2_querycap(struct file *file, void *fh, struct v4l2_capability *vc) -{ - struct camera_data *cam = video_drvdata(file); - - strscpy(vc->driver, "cpia2", sizeof(vc->driver)); - - if (cam->params.pnp_id.product == 0x151) - strscpy(vc->card, "QX5 Microscope", sizeof(vc->card)); - else - strscpy(vc->card, "CPiA2 Camera", sizeof(vc->card)); - switch (cam->params.pnp_id.device_type) { - case DEVICE_STV_672: - strcat(vc->card, " (672/"); - break; - case DEVICE_STV_676: - strcat(vc->card, " (676/"); - break; - default: - strcat(vc->card, " (XXX/"); - break; - } - switch (cam->params.version.sensor_flags) { - case CPIA2_VP_SENSOR_FLAGS_404: - strcat(vc->card, "404)"); - break; - case CPIA2_VP_SENSOR_FLAGS_407: - strcat(vc->card, "407)"); - break; - case CPIA2_VP_SENSOR_FLAGS_409: - strcat(vc->card, "409)"); - break; - case CPIA2_VP_SENSOR_FLAGS_410: - strcat(vc->card, "410)"); - break; - case CPIA2_VP_SENSOR_FLAGS_500: - strcat(vc->card, "500)"); - break; - default: - strcat(vc->card, "XXX)"); - break; - } - - if (usb_make_path(cam->dev, vc->bus_info, sizeof(vc->bus_info)) < 0) - memset(vc->bus_info, 0, sizeof(vc->bus_info)); - return 0; -} - -/****************************************************************************** - * - * ioctl_input - * - * V4L2 input get/set/enumerate - * - *****************************************************************************/ - -static int cpia2_enum_input(struct file *file, void *fh, struct v4l2_input *i) -{ - if (i->index) - return -EINVAL; - strscpy(i->name, "Camera", sizeof(i->name)); - i->type = V4L2_INPUT_TYPE_CAMERA; - return 0; -} - -static int cpia2_g_input(struct file *file, void *fh, unsigned int *i) -{ - *i = 0; - return 0; -} - -static int cpia2_s_input(struct file *file, void *fh, unsigned int i) -{ - return i ? -EINVAL : 0; -} - -/****************************************************************************** - * - * ioctl_enum_fmt - * - * V4L2 format enumerate - * - *****************************************************************************/ - -static int cpia2_enum_fmt_vid_cap(struct file *file, void *fh, - struct v4l2_fmtdesc *f) -{ - if (f->index > 1) - return -EINVAL; - - if (f->index == 0) - f->pixelformat = V4L2_PIX_FMT_MJPEG; - else - f->pixelformat = V4L2_PIX_FMT_JPEG; - return 0; -} - -/****************************************************************************** - * - * ioctl_try_fmt - * - * V4L2 format try - * - *****************************************************************************/ - -static int cpia2_try_fmt_vid_cap(struct file *file, void *fh, - struct v4l2_format *f) -{ - struct camera_data *cam = video_drvdata(file); - - if (f->fmt.pix.pixelformat != V4L2_PIX_FMT_MJPEG && - f->fmt.pix.pixelformat != V4L2_PIX_FMT_JPEG) - return -EINVAL; - - f->fmt.pix.field = V4L2_FIELD_NONE; - f->fmt.pix.bytesperline = 0; - f->fmt.pix.sizeimage = cam->frame_size; - f->fmt.pix.colorspace = V4L2_COLORSPACE_JPEG; - - switch (cpia2_match_video_size(f->fmt.pix.width, f->fmt.pix.height)) { - case VIDEOSIZE_VGA: - f->fmt.pix.width = 640; - f->fmt.pix.height = 480; - break; - case VIDEOSIZE_CIF: - f->fmt.pix.width = 352; - f->fmt.pix.height = 288; - break; - case VIDEOSIZE_QVGA: - f->fmt.pix.width = 320; - f->fmt.pix.height = 240; - break; - case VIDEOSIZE_288_216: - f->fmt.pix.width = 288; - f->fmt.pix.height = 216; - break; - case VIDEOSIZE_256_192: - f->fmt.pix.width = 256; - f->fmt.pix.height = 192; - break; - case VIDEOSIZE_224_168: - f->fmt.pix.width = 224; - f->fmt.pix.height = 168; - break; - case VIDEOSIZE_192_144: - f->fmt.pix.width = 192; - f->fmt.pix.height = 144; - break; - case VIDEOSIZE_QCIF: - default: - f->fmt.pix.width = 176; - f->fmt.pix.height = 144; - break; - } - - return 0; -} - -/****************************************************************************** - * - * ioctl_set_fmt - * - * V4L2 format set - * - *****************************************************************************/ - -static int cpia2_s_fmt_vid_cap(struct file *file, void *_fh, - struct v4l2_format *f) -{ - struct camera_data *cam = video_drvdata(file); - int err, frame; - - err = cpia2_try_fmt_vid_cap(file, _fh, f); - if (err != 0) - return err; - - cam->pixelformat = f->fmt.pix.pixelformat; - - /* NOTE: This should be set to 1 for MJPEG, but some apps don't handle - * the missing Huffman table properly. - */ - cam->params.compression.inhibit_htables = 0; - /*f->fmt.pix.pixelformat == V4L2_PIX_FMT_MJPEG;*/ - - /* we set the video window to something smaller or equal to what - * is requested by the user??? - */ - DBG("Requested width = %d, height = %d\n", - f->fmt.pix.width, f->fmt.pix.height); - if (f->fmt.pix.width != cam->width || - f->fmt.pix.height != cam->height) { - cam->width = f->fmt.pix.width; - cam->height = f->fmt.pix.height; - cam->params.roi.width = f->fmt.pix.width; - cam->params.roi.height = f->fmt.pix.height; - cpia2_set_format(cam); - } - - for (frame = 0; frame < cam->num_frames; ++frame) { - if (cam->buffers[frame].status == FRAME_READING) - if ((err = sync(cam, frame)) < 0) - return err; - - cam->buffers[frame].status = FRAME_EMPTY; - } - - return 0; -} - -/****************************************************************************** - * - * ioctl_get_fmt - * - * V4L2 format get - * - *****************************************************************************/ - -static int cpia2_g_fmt_vid_cap(struct file *file, void *fh, - struct v4l2_format *f) -{ - struct camera_data *cam = video_drvdata(file); - - f->fmt.pix.width = cam->width; - f->fmt.pix.height = cam->height; - f->fmt.pix.pixelformat = cam->pixelformat; - f->fmt.pix.field = V4L2_FIELD_NONE; - f->fmt.pix.bytesperline = 0; - f->fmt.pix.sizeimage = cam->frame_size; - f->fmt.pix.colorspace = V4L2_COLORSPACE_JPEG; - - return 0; -} - -/****************************************************************************** - * - * ioctl_cropcap - * - * V4L2 query cropping capabilities - * NOTE: cropping is currently disabled - * - *****************************************************************************/ - -static int cpia2_g_selection(struct file *file, void *fh, - struct v4l2_selection *s) -{ - struct camera_data *cam = video_drvdata(file); - - if (s->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) - return -EINVAL; - - switch (s->target) { - case V4L2_SEL_TGT_CROP_BOUNDS: - case V4L2_SEL_TGT_CROP_DEFAULT: - s->r.left = 0; - s->r.top = 0; - s->r.width = cam->width; - s->r.height = cam->height; - break; - default: - return -EINVAL; - } - return 0; -} - -struct framerate_info { - int value; - struct v4l2_fract period; -}; - -static const struct framerate_info framerate_controls[] = { - { CPIA2_VP_FRAMERATE_6_25, { 4, 25 } }, - { CPIA2_VP_FRAMERATE_7_5, { 2, 15 } }, - { CPIA2_VP_FRAMERATE_12_5, { 2, 25 } }, - { CPIA2_VP_FRAMERATE_15, { 1, 15 } }, - { CPIA2_VP_FRAMERATE_25, { 1, 25 } }, - { CPIA2_VP_FRAMERATE_30, { 1, 30 } }, -}; - -static int cpia2_g_parm(struct file *file, void *fh, struct v4l2_streamparm *p) -{ - struct camera_data *cam = video_drvdata(file); - struct v4l2_captureparm *cap = &p->parm.capture; - int i; - - if (p->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) - return -EINVAL; - - cap->capability = V4L2_CAP_TIMEPERFRAME; - cap->readbuffers = cam->num_frames; - for (i = 0; i < ARRAY_SIZE(framerate_controls); i++) - if (cam->params.vp_params.frame_rate == framerate_controls[i].value) { - cap->timeperframe = framerate_controls[i].period; - break; - } - return 0; -} - -static int cpia2_s_parm(struct file *file, void *fh, struct v4l2_streamparm *p) -{ - struct camera_data *cam = video_drvdata(file); - struct v4l2_captureparm *cap = &p->parm.capture; - struct v4l2_fract tpf = cap->timeperframe; - int max = ARRAY_SIZE(framerate_controls) - 1; - int ret; - int i; - - ret = cpia2_g_parm(file, fh, p); - if (ret || !tpf.denominator || !tpf.numerator) - return ret; - - /* Maximum 15 fps for this model */ - if (cam->params.pnp_id.device_type == DEVICE_STV_672 && - cam->params.version.sensor_flags == CPIA2_VP_SENSOR_FLAGS_500) - max -= 2; - for (i = 0; i <= max; i++) { - struct v4l2_fract f1 = tpf; - struct v4l2_fract f2 = framerate_controls[i].period; - - f1.numerator *= f2.denominator; - f2.numerator *= f1.denominator; - if (f1.numerator >= f2.numerator) - break; - } - if (i > max) - i = max; - cap->timeperframe = framerate_controls[i].period; - return cpia2_set_fps(cam, framerate_controls[i].value); -} - -static const struct { - u32 width; - u32 height; -} cpia2_framesizes[] = { - { 640, 480 }, - { 352, 288 }, - { 320, 240 }, - { 288, 216 }, - { 256, 192 }, - { 224, 168 }, - { 192, 144 }, - { 176, 144 }, -}; - -static int cpia2_enum_framesizes(struct file *file, void *fh, - struct v4l2_frmsizeenum *fsize) -{ - if (fsize->pixel_format != V4L2_PIX_FMT_MJPEG && - fsize->pixel_format != V4L2_PIX_FMT_JPEG) - return -EINVAL; - if (fsize->index >= ARRAY_SIZE(cpia2_framesizes)) - return -EINVAL; - fsize->type = V4L2_FRMSIZE_TYPE_DISCRETE; - fsize->discrete.width = cpia2_framesizes[fsize->index].width; - fsize->discrete.height = cpia2_framesizes[fsize->index].height; - - return 0; -} - -static int cpia2_enum_frameintervals(struct file *file, void *fh, - struct v4l2_frmivalenum *fival) -{ - struct camera_data *cam = video_drvdata(file); - int max = ARRAY_SIZE(framerate_controls) - 1; - int i; - - if (fival->pixel_format != V4L2_PIX_FMT_MJPEG && - fival->pixel_format != V4L2_PIX_FMT_JPEG) - return -EINVAL; - - /* Maximum 15 fps for this model */ - if (cam->params.pnp_id.device_type == DEVICE_STV_672 && - cam->params.version.sensor_flags == CPIA2_VP_SENSOR_FLAGS_500) - max -= 2; - if (fival->index > max) - return -EINVAL; - for (i = 0; i < ARRAY_SIZE(cpia2_framesizes); i++) - if (fival->width == cpia2_framesizes[i].width && - fival->height == cpia2_framesizes[i].height) - break; - if (i == ARRAY_SIZE(cpia2_framesizes)) - return -EINVAL; - fival->type = V4L2_FRMIVAL_TYPE_DISCRETE; - fival->discrete = framerate_controls[fival->index].period; - return 0; -} - -/****************************************************************************** - * - * ioctl_s_ctrl - * - * V4L2 set the value of a control variable - * - *****************************************************************************/ - -static int cpia2_s_ctrl(struct v4l2_ctrl *ctrl) -{ - struct camera_data *cam = - container_of(ctrl->handler, struct camera_data, hdl); - static const int flicker_table[] = { - NEVER_FLICKER, - FLICKER_50, - FLICKER_60, - }; - - DBG("Set control id:%d, value:%d\n", ctrl->id, ctrl->val); - - switch (ctrl->id) { - case V4L2_CID_BRIGHTNESS: - cpia2_set_brightness(cam, ctrl->val); - break; - case V4L2_CID_CONTRAST: - cpia2_set_contrast(cam, ctrl->val); - break; - case V4L2_CID_SATURATION: - cpia2_set_saturation(cam, ctrl->val); - break; - case V4L2_CID_HFLIP: - cpia2_set_property_mirror(cam, ctrl->val); - break; - case V4L2_CID_VFLIP: - cpia2_set_property_flip(cam, ctrl->val); - break; - case V4L2_CID_POWER_LINE_FREQUENCY: - return cpia2_set_flicker_mode(cam, flicker_table[ctrl->val]); - case V4L2_CID_ILLUMINATORS_1: - return cpia2_set_gpio(cam, (cam->top_light->val << 6) | - (cam->bottom_light->val << 7)); - case V4L2_CID_JPEG_ACTIVE_MARKER: - cam->params.compression.inhibit_htables = - !(ctrl->val & V4L2_JPEG_ACTIVE_MARKER_DHT); - break; - case V4L2_CID_JPEG_COMPRESSION_QUALITY: - cam->params.vc_params.quality = ctrl->val; - break; - case CPIA2_CID_USB_ALT: - cam->params.camera_state.stream_mode = ctrl->val; - break; - default: - return -EINVAL; - } - - return 0; -} - -/****************************************************************************** - * - * ioctl_g_jpegcomp - * - * V4L2 get the JPEG compression parameters - * - *****************************************************************************/ - -static int cpia2_g_jpegcomp(struct file *file, void *fh, struct v4l2_jpegcompression *parms) -{ - struct camera_data *cam = video_drvdata(file); - - memset(parms, 0, sizeof(*parms)); - - parms->quality = 80; // TODO: Can this be made meaningful? - - parms->jpeg_markers = V4L2_JPEG_MARKER_DQT | V4L2_JPEG_MARKER_DRI; - if (!cam->params.compression.inhibit_htables) - parms->jpeg_markers |= V4L2_JPEG_MARKER_DHT; - - parms->APPn = cam->APPn; - parms->APP_len = cam->APP_len; - if (cam->APP_len > 0) { - memcpy(parms->APP_data, cam->APP_data, cam->APP_len); - parms->jpeg_markers |= V4L2_JPEG_MARKER_APP; - } - - parms->COM_len = cam->COM_len; - if (cam->COM_len > 0) { - memcpy(parms->COM_data, cam->COM_data, cam->COM_len); - parms->jpeg_markers |= JPEG_MARKER_COM; - } - - DBG("G_JPEGCOMP APP_len:%d COM_len:%d\n", - parms->APP_len, parms->COM_len); - - return 0; -} - -/****************************************************************************** - * - * ioctl_s_jpegcomp - * - * V4L2 set the JPEG compression parameters - * NOTE: quality and some jpeg_markers are ignored. - * - *****************************************************************************/ - -static int cpia2_s_jpegcomp(struct file *file, void *fh, - const struct v4l2_jpegcompression *parms) -{ - struct camera_data *cam = video_drvdata(file); - - DBG("S_JPEGCOMP APP_len:%d COM_len:%d\n", - parms->APP_len, parms->COM_len); - - cam->params.compression.inhibit_htables = - !(parms->jpeg_markers & V4L2_JPEG_MARKER_DHT); - - if (parms->APP_len != 0) { - if (parms->APP_len > 0 && - parms->APP_len <= sizeof(cam->APP_data) && - parms->APPn >= 0 && parms->APPn <= 15) { - cam->APPn = parms->APPn; - cam->APP_len = parms->APP_len; - memcpy(cam->APP_data, parms->APP_data, parms->APP_len); - } else { - LOG("Bad APPn Params n=%d len=%d\n", - parms->APPn, parms->APP_len); - return -EINVAL; - } - } else { - cam->APP_len = 0; - } - - if (parms->COM_len != 0) { - if (parms->COM_len > 0 && - parms->COM_len <= sizeof(cam->COM_data)) { - cam->COM_len = parms->COM_len; - memcpy(cam->COM_data, parms->COM_data, parms->COM_len); - } else { - LOG("Bad COM_len=%d\n", parms->COM_len); - return -EINVAL; - } - } - - return 0; -} - -/****************************************************************************** - * - * ioctl_reqbufs - * - * V4L2 Initiate memory mapping. - * NOTE: The user's request is ignored. For now the buffers are fixed. - * - *****************************************************************************/ - -static int cpia2_reqbufs(struct file *file, void *fh, struct v4l2_requestbuffers *req) -{ - struct camera_data *cam = video_drvdata(file); - - if (req->type != V4L2_BUF_TYPE_VIDEO_CAPTURE || - req->memory != V4L2_MEMORY_MMAP) - return -EINVAL; - - DBG("REQBUFS requested:%d returning:%d\n", req->count, cam->num_frames); - req->count = cam->num_frames; - memset(&req->reserved, 0, sizeof(req->reserved)); - - return 0; -} - -/****************************************************************************** - * - * ioctl_querybuf - * - * V4L2 Query memory buffer status. - * - *****************************************************************************/ - -static int cpia2_querybuf(struct file *file, void *fh, struct v4l2_buffer *buf) -{ - struct camera_data *cam = video_drvdata(file); - - if (buf->type != V4L2_BUF_TYPE_VIDEO_CAPTURE || - buf->index >= cam->num_frames) - return -EINVAL; - - buf->m.offset = cam->buffers[buf->index].data - cam->frame_buffer; - buf->length = cam->frame_size; - - buf->memory = V4L2_MEMORY_MMAP; - - if (cam->mmapped) - buf->flags = V4L2_BUF_FLAG_MAPPED; - else - buf->flags = 0; - - buf->flags |= V4L2_BUF_FLAG_TIMESTAMP_MONOTONIC; - - switch (cam->buffers[buf->index].status) { - case FRAME_EMPTY: - case FRAME_ERROR: - case FRAME_READING: - buf->bytesused = 0; - buf->flags = V4L2_BUF_FLAG_QUEUED; - break; - case FRAME_READY: - buf->bytesused = cam->buffers[buf->index].length; - v4l2_buffer_set_timestamp(buf, cam->buffers[buf->index].ts); - buf->sequence = cam->buffers[buf->index].seq; - buf->flags = V4L2_BUF_FLAG_DONE; - break; - } - - DBG("QUERYBUF index:%d offset:%d flags:%d seq:%d bytesused:%d\n", - buf->index, buf->m.offset, buf->flags, buf->sequence, - buf->bytesused); - - return 0; -} - -/****************************************************************************** - * - * ioctl_qbuf - * - * V4L2 User is freeing buffer - * - *****************************************************************************/ - -static int cpia2_qbuf(struct file *file, void *fh, struct v4l2_buffer *buf) -{ - struct camera_data *cam = video_drvdata(file); - - if (buf->type != V4L2_BUF_TYPE_VIDEO_CAPTURE || - buf->memory != V4L2_MEMORY_MMAP || - buf->index >= cam->num_frames) - return -EINVAL; - - DBG("QBUF #%d\n", buf->index); - - if (cam->buffers[buf->index].status == FRAME_READY) - cam->buffers[buf->index].status = FRAME_EMPTY; - - return 0; -} - -/****************************************************************************** - * - * find_earliest_filled_buffer - * - * Helper for ioctl_dqbuf. Find the next ready buffer. - * - *****************************************************************************/ - -static int find_earliest_filled_buffer(struct camera_data *cam) -{ - int i; - int found = -1; - - for (i = 0; i < cam->num_frames; i++) { - if (cam->buffers[i].status == FRAME_READY) { - if (found < 0) { - found = i; - } else { - /* find which buffer is earlier */ - if (cam->buffers[i].ts < cam->buffers[found].ts) - found = i; - } - } - } - return found; -} - -/****************************************************************************** - * - * ioctl_dqbuf - * - * V4L2 User is asking for a filled buffer. - * - *****************************************************************************/ - -static int cpia2_dqbuf(struct file *file, void *fh, struct v4l2_buffer *buf) -{ - struct camera_data *cam = video_drvdata(file); - int frame; - - if (buf->type != V4L2_BUF_TYPE_VIDEO_CAPTURE || - buf->memory != V4L2_MEMORY_MMAP) - return -EINVAL; - - frame = find_earliest_filled_buffer(cam); - - if (frame < 0 && file->f_flags & O_NONBLOCK) - return -EAGAIN; - - if (frame < 0) { - /* Wait for a frame to become available */ - struct framebuf *cb = cam->curbuff; - - mutex_unlock(&cam->v4l2_lock); - wait_event_interruptible(cam->wq_stream, - !video_is_registered(&cam->vdev) || - (cb = cam->curbuff)->status == FRAME_READY); - mutex_lock(&cam->v4l2_lock); - if (signal_pending(current)) - return -ERESTARTSYS; - if (!video_is_registered(&cam->vdev)) - return -ENOTTY; - frame = cb->num; - } - - buf->index = frame; - buf->bytesused = cam->buffers[buf->index].length; - buf->flags = V4L2_BUF_FLAG_MAPPED | V4L2_BUF_FLAG_DONE - | V4L2_BUF_FLAG_TIMESTAMP_MONOTONIC; - buf->field = V4L2_FIELD_NONE; - v4l2_buffer_set_timestamp(buf, cam->buffers[buf->index].ts); - buf->sequence = cam->buffers[buf->index].seq; - buf->m.offset = cam->buffers[buf->index].data - cam->frame_buffer; - buf->length = cam->frame_size; - buf->reserved2 = 0; - buf->request_fd = 0; - memset(&buf->timecode, 0, sizeof(buf->timecode)); - - DBG("DQBUF #%d status:%d seq:%d length:%d\n", buf->index, - cam->buffers[buf->index].status, buf->sequence, buf->bytesused); - - return 0; -} - -static int cpia2_streamon(struct file *file, void *fh, enum v4l2_buf_type type) -{ - struct camera_data *cam = video_drvdata(file); - int ret = -EINVAL; - - DBG("VIDIOC_STREAMON, streaming=%d\n", cam->streaming); - if (!cam->mmapped || type != V4L2_BUF_TYPE_VIDEO_CAPTURE) - return -EINVAL; - - if (!cam->streaming) { - ret = cpia2_usb_stream_start(cam, - cam->params.camera_state.stream_mode); - if (!ret) - v4l2_ctrl_grab(cam->usb_alt, true); - } - return ret; -} - -static int cpia2_streamoff(struct file *file, void *fh, enum v4l2_buf_type type) -{ - struct camera_data *cam = video_drvdata(file); - int ret = -EINVAL; - - DBG("VIDIOC_STREAMOFF, streaming=%d\n", cam->streaming); - if (!cam->mmapped || type != V4L2_BUF_TYPE_VIDEO_CAPTURE) - return -EINVAL; - - if (cam->streaming) { - ret = cpia2_usb_stream_stop(cam); - if (!ret) - v4l2_ctrl_grab(cam->usb_alt, false); - } - return ret; -} - -/****************************************************************************** - * - * cpia2_mmap - * - *****************************************************************************/ -static int cpia2_mmap(struct file *file, struct vm_area_struct *area) -{ - struct camera_data *cam = video_drvdata(file); - int retval; - - if (mutex_lock_interruptible(&cam->v4l2_lock)) - return -ERESTARTSYS; - retval = cpia2_remap_buffer(cam, area); - - if (!retval) - cam->stream_fh = file->private_data; - mutex_unlock(&cam->v4l2_lock); - return retval; -} - -/****************************************************************************** - * - * reset_camera_struct_v4l - * - * Sets all values to the defaults - *****************************************************************************/ -static void reset_camera_struct_v4l(struct camera_data *cam) -{ - cam->width = cam->params.roi.width; - cam->height = cam->params.roi.height; - - cam->frame_size = buffer_size; - cam->num_frames = num_buffers; - - /* Flicker modes */ - cam->params.flicker_control.flicker_mode_req = flicker_mode; - - /* stream modes */ - cam->params.camera_state.stream_mode = alternate; - - cam->pixelformat = V4L2_PIX_FMT_JPEG; -} - -static const struct v4l2_ioctl_ops cpia2_ioctl_ops = { - .vidioc_querycap = cpia2_querycap, - .vidioc_enum_input = cpia2_enum_input, - .vidioc_g_input = cpia2_g_input, - .vidioc_s_input = cpia2_s_input, - .vidioc_enum_fmt_vid_cap = cpia2_enum_fmt_vid_cap, - .vidioc_g_fmt_vid_cap = cpia2_g_fmt_vid_cap, - .vidioc_s_fmt_vid_cap = cpia2_s_fmt_vid_cap, - .vidioc_try_fmt_vid_cap = cpia2_try_fmt_vid_cap, - .vidioc_g_jpegcomp = cpia2_g_jpegcomp, - .vidioc_s_jpegcomp = cpia2_s_jpegcomp, - .vidioc_g_selection = cpia2_g_selection, - .vidioc_reqbufs = cpia2_reqbufs, - .vidioc_querybuf = cpia2_querybuf, - .vidioc_qbuf = cpia2_qbuf, - .vidioc_dqbuf = cpia2_dqbuf, - .vidioc_streamon = cpia2_streamon, - .vidioc_streamoff = cpia2_streamoff, - .vidioc_s_parm = cpia2_s_parm, - .vidioc_g_parm = cpia2_g_parm, - .vidioc_enum_framesizes = cpia2_enum_framesizes, - .vidioc_enum_frameintervals = cpia2_enum_frameintervals, - .vidioc_subscribe_event = v4l2_ctrl_subscribe_event, - .vidioc_unsubscribe_event = v4l2_event_unsubscribe, -}; - -/*** - * The v4l video device structure initialized for this device - ***/ -static const struct v4l2_file_operations cpia2_fops = { - .owner = THIS_MODULE, - .open = cpia2_open, - .release = cpia2_close, - .read = cpia2_v4l_read, - .poll = cpia2_v4l_poll, - .unlocked_ioctl = video_ioctl2, - .mmap = cpia2_mmap, -}; - -static const struct video_device cpia2_template = { - /* I could not find any place for the old .initialize initializer?? */ - .name = "CPiA2 Camera", - .fops = &cpia2_fops, - .ioctl_ops = &cpia2_ioctl_ops, - .release = video_device_release_empty, -}; - -void cpia2_camera_release(struct v4l2_device *v4l2_dev) -{ - struct camera_data *cam = - container_of(v4l2_dev, struct camera_data, v4l2_dev); - - v4l2_ctrl_handler_free(&cam->hdl); - v4l2_device_unregister(&cam->v4l2_dev); - kfree(cam); -} - -static const struct v4l2_ctrl_ops cpia2_ctrl_ops = { - .s_ctrl = cpia2_s_ctrl, -}; - -/****************************************************************************** - * - * cpia2_register_camera - * - *****************************************************************************/ -int cpia2_register_camera(struct camera_data *cam) -{ - struct v4l2_ctrl_handler *hdl = &cam->hdl; - struct v4l2_ctrl_config cpia2_usb_alt = { - .ops = &cpia2_ctrl_ops, - .id = CPIA2_CID_USB_ALT, - .name = "USB Alternate", - .type = V4L2_CTRL_TYPE_INTEGER, - .min = USBIF_ISO_1, - .max = USBIF_ISO_6, - .step = 1, - }; - int ret; - - v4l2_ctrl_handler_init(hdl, 12); - v4l2_ctrl_new_std(hdl, &cpia2_ctrl_ops, - V4L2_CID_BRIGHTNESS, - cam->params.pnp_id.device_type == DEVICE_STV_672 ? 1 : 0, - 255, 1, DEFAULT_BRIGHTNESS); - v4l2_ctrl_new_std(hdl, &cpia2_ctrl_ops, - V4L2_CID_CONTRAST, 0, 255, 1, DEFAULT_CONTRAST); - v4l2_ctrl_new_std(hdl, &cpia2_ctrl_ops, - V4L2_CID_SATURATION, 0, 255, 1, DEFAULT_SATURATION); - v4l2_ctrl_new_std(hdl, &cpia2_ctrl_ops, - V4L2_CID_HFLIP, 0, 1, 1, 0); - v4l2_ctrl_new_std(hdl, &cpia2_ctrl_ops, - V4L2_CID_JPEG_ACTIVE_MARKER, 0, - V4L2_JPEG_ACTIVE_MARKER_DHT, 0, - V4L2_JPEG_ACTIVE_MARKER_DHT); - v4l2_ctrl_new_std(hdl, &cpia2_ctrl_ops, - V4L2_CID_JPEG_COMPRESSION_QUALITY, 1, - 100, 1, 100); - cpia2_usb_alt.def = alternate; - cam->usb_alt = v4l2_ctrl_new_custom(hdl, &cpia2_usb_alt, NULL); - /* VP5 Only */ - if (cam->params.pnp_id.device_type != DEVICE_STV_672) - v4l2_ctrl_new_std(hdl, &cpia2_ctrl_ops, - V4L2_CID_VFLIP, 0, 1, 1, 0); - /* Flicker control only valid for 672 */ - if (cam->params.pnp_id.device_type == DEVICE_STV_672) - v4l2_ctrl_new_std_menu(hdl, &cpia2_ctrl_ops, - V4L2_CID_POWER_LINE_FREQUENCY, - V4L2_CID_POWER_LINE_FREQUENCY_60HZ, - 0, 0); - /* Light control only valid for the QX5 Microscope */ - if (cam->params.pnp_id.product == 0x151) { - cam->top_light = v4l2_ctrl_new_std(hdl, &cpia2_ctrl_ops, - V4L2_CID_ILLUMINATORS_1, - 0, 1, 1, 0); - cam->bottom_light = v4l2_ctrl_new_std(hdl, &cpia2_ctrl_ops, - V4L2_CID_ILLUMINATORS_2, - 0, 1, 1, 0); - v4l2_ctrl_cluster(2, &cam->top_light); - } - - if (hdl->error) { - ret = hdl->error; - v4l2_ctrl_handler_free(hdl); - return ret; - } - - cam->vdev = cpia2_template; - video_set_drvdata(&cam->vdev, cam); - cam->vdev.lock = &cam->v4l2_lock; - cam->vdev.ctrl_handler = hdl; - cam->vdev.v4l2_dev = &cam->v4l2_dev; - cam->vdev.device_caps = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_READWRITE | - V4L2_CAP_STREAMING; - - reset_camera_struct_v4l(cam); - - /* register v4l device */ - if (video_register_device(&cam->vdev, VFL_TYPE_VIDEO, video_nr) < 0) { - ERR("video_register_device failed\n"); - return -ENODEV; - } - - return 0; -} - -/****************************************************************************** - * - * cpia2_unregister_camera - * - *****************************************************************************/ -void cpia2_unregister_camera(struct camera_data *cam) -{ - video_unregister_device(&cam->vdev); -} - -/****************************************************************************** - * - * check_parameters - * - * Make sure that all user-supplied parameters are sensible - *****************************************************************************/ -static void __init check_parameters(void) -{ - if (buffer_size < PAGE_SIZE) { - buffer_size = PAGE_SIZE; - LOG("buffer_size too small, setting to %d\n", buffer_size); - } else if (buffer_size > 1024 * 1024) { - /* arbitrary upper limiit */ - buffer_size = 1024 * 1024; - LOG("buffer_size ridiculously large, setting to %d\n", - buffer_size); - } else { - buffer_size += PAGE_SIZE - 1; - buffer_size &= ~(PAGE_SIZE - 1); - } - - if (num_buffers < 1) { - num_buffers = 1; - LOG("num_buffers too small, setting to %d\n", num_buffers); - } else if (num_buffers > VIDEO_MAX_FRAME) { - num_buffers = VIDEO_MAX_FRAME; - LOG("num_buffers too large, setting to %d\n", num_buffers); - } - - if (alternate < USBIF_ISO_1 || alternate > USBIF_ISO_6) { - alternate = DEFAULT_ALT; - LOG("alternate specified is invalid, using %d\n", alternate); - } - - if (flicker_mode != 0 && flicker_mode != FLICKER_50 && flicker_mode != FLICKER_60) { - flicker_mode = 0; - LOG("Flicker mode specified is invalid, using %d\n", - flicker_mode); - } - - DBG("Using %d buffers, each %d bytes, alternate=%d\n", - num_buffers, buffer_size, alternate); -} - -/************ Module Stuff ***************/ - -/****************************************************************************** - * - * cpia2_init/module_init - * - *****************************************************************************/ -static int __init cpia2_init(void) -{ - LOG("%s v%s\n", - ABOUT, CPIA_VERSION); - check_parameters(); - return cpia2_usb_init(); -} - -/****************************************************************************** - * - * cpia2_exit/module_exit - * - *****************************************************************************/ -static void __exit cpia2_exit(void) -{ - cpia2_usb_cleanup(); - schedule_timeout(2 * HZ); -} - -module_init(cpia2_init); -module_exit(cpia2_exit); From patchwork Wed Jan 11 10:52:48 2023 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Hans Verkuil X-Patchwork-Id: 13096400 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id 9C36FC6379F for ; Wed, 11 Jan 2023 10:53:46 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S232511AbjAKKxW (ORCPT ); Wed, 11 Jan 2023 05:53:22 -0500 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:37182 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S238611AbjAKKxL (ORCPT ); Wed, 11 Jan 2023 05:53:11 -0500 Received: from ams.source.kernel.org (ams.source.kernel.org [145.40.68.75]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id CE6A1101D for ; Wed, 11 Jan 2023 02:53:07 -0800 (PST) Received: from smtp.kernel.org (relay.kernel.org [52.25.139.140]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by ams.source.kernel.org (Postfix) with ESMTPS id 37268B81BB1 for ; Wed, 11 Jan 2023 10:53:06 +0000 (UTC) Received: by smtp.kernel.org (Postfix) with ESMTPSA id 31CD7C433EF; Wed, 11 Jan 2023 10:53:04 +0000 (UTC) From: Hans Verkuil To: linux-media@vger.kernel.org Cc: Lad Prabhakar , Hans Verkuil Subject: [PATCH 03/13] fsl-viu: remove deprecated driver Date: Wed, 11 Jan 2023 11:52:48 +0100 Message-Id: <20230111105258.547471-4-hverkuil-cisco@xs4all.nl> X-Mailer: git-send-email 2.39.0 In-Reply-To: <20230111105258.547471-1-hverkuil-cisco@xs4all.nl> References: <20230111105258.547471-1-hverkuil-cisco@xs4all.nl> MIME-Version: 1.0 Precedence: bulk List-ID: X-Mailing-List: linux-media@vger.kernel.org The fsl-viu driver does not use the vb2 framework for streaming video, instead it uses the old vb1 framework and nobody stepped in to convert this driver to vb2. The hardware is very old, so the decision was made to remove it altogether since we want to get rid of the old vb1 framework. Signed-off-by: Hans Verkuil --- .../admin-guide/media/platform-cardlist.rst | 1 - drivers/staging/media/Kconfig | 1 - drivers/staging/media/Makefile | 1 - .../staging/media/deprecated/fsl-viu/Kconfig | 15 - .../staging/media/deprecated/fsl-viu/Makefile | 2 - drivers/staging/media/deprecated/fsl-viu/TODO | 7 - .../media/deprecated/fsl-viu/fsl-viu.c | 1599 ----------------- 7 files changed, 1626 deletions(-) delete mode 100644 drivers/staging/media/deprecated/fsl-viu/Kconfig delete mode 100644 drivers/staging/media/deprecated/fsl-viu/Makefile delete mode 100644 drivers/staging/media/deprecated/fsl-viu/TODO delete mode 100644 drivers/staging/media/deprecated/fsl-viu/fsl-viu.c diff --git a/Documentation/admin-guide/media/platform-cardlist.rst b/Documentation/admin-guide/media/platform-cardlist.rst index ac73c4166d1e..c0c22b3f469d 100644 --- a/Documentation/admin-guide/media/platform-cardlist.rst +++ b/Documentation/admin-guide/media/platform-cardlist.rst @@ -30,7 +30,6 @@ exynos-fimc-is EXYNOS4x12 FIMC-IS (Imaging Subsystem) exynos-fimc-lite EXYNOS FIMC-LITE camera interface exynos-gsc Samsung Exynos G-Scaler exy Samsung S5P/EXYNOS4 SoC series Camera Subsystem -fsl-viu Freescale VIU imx-pxp i.MX Pixel Pipeline (PXP) isdf TI DM365 ISIF video capture mmp_camera Marvell Armada 610 integrated camera controller diff --git a/drivers/staging/media/Kconfig b/drivers/staging/media/Kconfig index 8d6c26e48609..257bb35af36f 100644 --- a/drivers/staging/media/Kconfig +++ b/drivers/staging/media/Kconfig @@ -52,7 +52,6 @@ menuconfig STAGING_MEDIA_DEPRECATED if STAGING_MEDIA_DEPRECATED source "drivers/staging/media/deprecated/atmel/Kconfig" -source "drivers/staging/media/deprecated/fsl-viu/Kconfig" source "drivers/staging/media/deprecated/saa7146/Kconfig" source "drivers/staging/media/deprecated/stkwebcam/Kconfig" source "drivers/staging/media/deprecated/tm6000/Kconfig" diff --git a/drivers/staging/media/Makefile b/drivers/staging/media/Makefile index 1f2c00cae4db..55e7479f91cf 100644 --- a/drivers/staging/media/Makefile +++ b/drivers/staging/media/Makefile @@ -11,7 +11,6 @@ obj-$(CONFIG_VIDEO_SUNXI) += sunxi/ obj-$(CONFIG_VIDEO_TEGRA) += tegra-video/ obj-$(CONFIG_VIDEO_IPU3_IMGU) += ipu3/ obj-$(CONFIG_VIDEO_TM6000) += deprecated/tm6000/ -obj-$(CONFIG_VIDEO_VIU) += deprecated/fsl-viu/ obj-$(CONFIG_USB_ZR364XX) += deprecated/zr364xx/ obj-y += deprecated/vpfe_capture/ obj-y += deprecated/saa7146/ diff --git a/drivers/staging/media/deprecated/fsl-viu/Kconfig b/drivers/staging/media/deprecated/fsl-viu/Kconfig deleted file mode 100644 index 399892c69a18..000000000000 --- a/drivers/staging/media/deprecated/fsl-viu/Kconfig +++ /dev/null @@ -1,15 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0-only -config VIDEO_VIU - tristate "NXP VIU Video Driver (DEPRECATED)" - depends on V4L_PLATFORM_DRIVERS - depends on VIDEO_DEV && (PPC_MPC512x || COMPILE_TEST) && I2C - select VIDEOBUF_DMA_CONTIG - help - Support for Freescale VIU video driver. This device captures - video data, or overlays video on DIU frame buffer. - - This driver is deprecated and is scheduled for removal by - the beginning of 2023. See the TODO file for more information. - - Say Y here if you want to enable VIU device on MPC5121e Rev2+. - In doubt, say N. diff --git a/drivers/staging/media/deprecated/fsl-viu/Makefile b/drivers/staging/media/deprecated/fsl-viu/Makefile deleted file mode 100644 index 931ec56ad08c..000000000000 --- a/drivers/staging/media/deprecated/fsl-viu/Makefile +++ /dev/null @@ -1,2 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0-only -obj-$(CONFIG_VIDEO_VIU) += fsl-viu.o diff --git a/drivers/staging/media/deprecated/fsl-viu/TODO b/drivers/staging/media/deprecated/fsl-viu/TODO deleted file mode 100644 index ecb30a429689..000000000000 --- a/drivers/staging/media/deprecated/fsl-viu/TODO +++ /dev/null @@ -1,7 +0,0 @@ -This is one of the few drivers still not using the vb2 -framework, so this driver is now deprecated with the intent of -removing it altogether by the beginning of 2023. - -In order to keep this driver it has to be converted to vb2. -If someone is interested in doing this work, then contact the -linux-media mailinglist (https://linuxtv.org/lists.php). diff --git a/drivers/staging/media/deprecated/fsl-viu/fsl-viu.c b/drivers/staging/media/deprecated/fsl-viu/fsl-viu.c deleted file mode 100644 index afc96f6db2a1..000000000000 --- a/drivers/staging/media/deprecated/fsl-viu/fsl-viu.c +++ /dev/null @@ -1,1599 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/* - * Copyright 2008-2010 Freescale Semiconductor, Inc. All Rights Reserved. - * - * Freescale VIU video driver - * - * Authors: Hongjun Chen - * Porting to 2.6.35 by DENX Software Engineering, - * Anatolij Gustschin - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#define DRV_NAME "fsl_viu" -#define VIU_VERSION "0.5.1" - -#define BUFFER_TIMEOUT msecs_to_jiffies(500) /* 0.5 seconds */ - -#define VIU_VID_MEM_LIMIT 4 /* Video memory limit, in Mb */ - -/* I2C address of video decoder chip is 0x4A */ -#define VIU_VIDEO_DECODER_ADDR 0x25 - -static int info_level; - -#define dprintk(level, fmt, arg...) \ - do { \ - if (level <= info_level) \ - printk(KERN_DEBUG "viu: " fmt , ## arg); \ - } while (0) - -/* - * Basic structures - */ -struct viu_fmt { - u32 fourcc; /* v4l2 format id */ - u32 pixelformat; - int depth; -}; - -static struct viu_fmt formats[] = { - { - .fourcc = V4L2_PIX_FMT_RGB565, - .pixelformat = V4L2_PIX_FMT_RGB565, - .depth = 16, - }, { - .fourcc = V4L2_PIX_FMT_RGB32, - .pixelformat = V4L2_PIX_FMT_RGB32, - .depth = 32, - } -}; - -struct viu_dev; -struct viu_buf; - -/* buffer for one video frame */ -struct viu_buf { - /* common v4l buffer stuff -- must be first */ - struct videobuf_buffer vb; - struct viu_fmt *fmt; -}; - -struct viu_dmaqueue { - struct viu_dev *dev; - struct list_head active; - struct list_head queued; - struct timer_list timeout; -}; - -struct viu_status { - u32 field_irq; - u32 vsync_irq; - u32 hsync_irq; - u32 vstart_irq; - u32 dma_end_irq; - u32 error_irq; -}; - -struct viu_reg { - u32 status_cfg; - u32 luminance; - u32 chroma_r; - u32 chroma_g; - u32 chroma_b; - u32 field_base_addr; - u32 dma_inc; - u32 picture_count; - u32 req_alarm; - u32 alpha; -} __attribute__ ((packed)); - -struct viu_dev { - struct v4l2_device v4l2_dev; - struct v4l2_ctrl_handler hdl; - struct mutex lock; - spinlock_t slock; - int users; - - struct device *dev; - /* various device info */ - struct video_device *vdev; - struct viu_dmaqueue vidq; - enum v4l2_field capfield; - int field; - int first; - int dma_done; - - /* Hardware register area */ - struct viu_reg __iomem *vr; - - /* Interrupt vector */ - int irq; - struct viu_status irqs; - - /* video overlay */ - struct v4l2_framebuffer ovbuf; - struct viu_fmt *ovfmt; - unsigned int ovenable; - enum v4l2_field ovfield; - - /* crop */ - struct v4l2_rect crop_current; - - /* clock pointer */ - struct clk *clk; - - /* decoder */ - struct v4l2_subdev *decoder; - - v4l2_std_id std; -}; - -struct viu_fh { - /* must remain the first field of this struct */ - struct v4l2_fh fh; - struct viu_dev *dev; - - /* video capture */ - struct videobuf_queue vb_vidq; - spinlock_t vbq_lock; /* spinlock for the videobuf queue */ - - /* video overlay */ - struct v4l2_window win; - struct v4l2_clip clips[1]; - - /* video capture */ - struct viu_fmt *fmt; - int width, height, sizeimage; - enum v4l2_buf_type type; -}; - -static struct viu_reg reg_val; - -/* - * Macro definitions of VIU registers - */ - -/* STATUS_CONFIG register */ -enum status_config { - SOFT_RST = 1 << 0, - - ERR_MASK = 0x0f << 4, /* Error code mask */ - ERR_NO = 0x00, /* No error */ - ERR_DMA_V = 0x01 << 4, /* DMA in vertical active */ - ERR_DMA_VB = 0x02 << 4, /* DMA in vertical blanking */ - ERR_LINE_TOO_LONG = 0x04 << 4, /* Line too long */ - ERR_TOO_MANG_LINES = 0x05 << 4, /* Too many lines in field */ - ERR_LINE_TOO_SHORT = 0x06 << 4, /* Line too short */ - ERR_NOT_ENOUGH_LINE = 0x07 << 4, /* Not enough lines in field */ - ERR_FIFO_OVERFLOW = 0x08 << 4, /* FIFO overflow */ - ERR_FIFO_UNDERFLOW = 0x09 << 4, /* FIFO underflow */ - ERR_1bit_ECC = 0x0a << 4, /* One bit ECC error */ - ERR_MORE_ECC = 0x0b << 4, /* Two/more bits ECC error */ - - INT_FIELD_EN = 0x01 << 8, /* Enable field interrupt */ - INT_VSYNC_EN = 0x01 << 9, /* Enable vsync interrupt */ - INT_HSYNC_EN = 0x01 << 10, /* Enable hsync interrupt */ - INT_VSTART_EN = 0x01 << 11, /* Enable vstart interrupt */ - INT_DMA_END_EN = 0x01 << 12, /* Enable DMA end interrupt */ - INT_ERROR_EN = 0x01 << 13, /* Enable error interrupt */ - INT_ECC_EN = 0x01 << 14, /* Enable ECC interrupt */ - - INT_FIELD_STATUS = 0x01 << 16, /* field interrupt status */ - INT_VSYNC_STATUS = 0x01 << 17, /* vsync interrupt status */ - INT_HSYNC_STATUS = 0x01 << 18, /* hsync interrupt status */ - INT_VSTART_STATUS = 0x01 << 19, /* vstart interrupt status */ - INT_DMA_END_STATUS = 0x01 << 20, /* DMA end interrupt status */ - INT_ERROR_STATUS = 0x01 << 21, /* error interrupt status */ - - DMA_ACT = 0x01 << 27, /* Enable DMA transfer */ - FIELD_NO = 0x01 << 28, /* Field number */ - DITHER_ON = 0x01 << 29, /* Dithering is on */ - ROUND_ON = 0x01 << 30, /* Round is on */ - MODE_32BIT = 1UL << 31, /* Data in RGBa888, - * 0 in RGB565 - */ -}; - -#define norm_maxw() 720 -#define norm_maxh() 576 - -#define INT_ALL_STATUS (INT_FIELD_STATUS | INT_VSYNC_STATUS | \ - INT_HSYNC_STATUS | INT_VSTART_STATUS | \ - INT_DMA_END_STATUS | INT_ERROR_STATUS) - -#define NUM_FORMATS ARRAY_SIZE(formats) - -static irqreturn_t viu_intr(int irq, void *dev_id); - -static struct viu_fmt *format_by_fourcc(int fourcc) -{ - int i; - - for (i = 0; i < NUM_FORMATS; i++) { - if (formats[i].pixelformat == fourcc) - return formats + i; - } - - dprintk(0, "unknown pixelformat:'%4.4s'\n", (char *)&fourcc); - return NULL; -} - -static void viu_start_dma(struct viu_dev *dev) -{ - struct viu_reg __iomem *vr = dev->vr; - - dev->field = 0; - - /* Enable DMA operation */ - iowrite32be(SOFT_RST, &vr->status_cfg); - iowrite32be(INT_FIELD_EN, &vr->status_cfg); -} - -static void viu_stop_dma(struct viu_dev *dev) -{ - struct viu_reg __iomem *vr = dev->vr; - int cnt = 100; - u32 status_cfg; - - iowrite32be(0, &vr->status_cfg); - - /* Clear pending interrupts */ - status_cfg = ioread32be(&vr->status_cfg); - if (status_cfg & 0x3f0000) - iowrite32be(status_cfg & 0x3f0000, &vr->status_cfg); - - if (status_cfg & DMA_ACT) { - do { - status_cfg = ioread32be(&vr->status_cfg); - if (status_cfg & INT_DMA_END_STATUS) - break; - } while (cnt--); - - if (cnt < 0) { - /* timed out, issue soft reset */ - iowrite32be(SOFT_RST, &vr->status_cfg); - iowrite32be(0, &vr->status_cfg); - } else { - /* clear DMA_END and other pending irqs */ - iowrite32be(status_cfg & 0x3f0000, &vr->status_cfg); - } - } - - dev->field = 0; -} - -static int restart_video_queue(struct viu_dmaqueue *vidq) -{ - struct viu_buf *buf, *prev; - - dprintk(1, "%s vidq=%p\n", __func__, vidq); - if (!list_empty(&vidq->active)) { - buf = list_entry(vidq->active.next, struct viu_buf, vb.queue); - dprintk(2, "restart_queue [%p/%d]: restart dma\n", - buf, buf->vb.i); - - viu_stop_dma(vidq->dev); - - /* cancel all outstanding capture requests */ - list_for_each_entry_safe(buf, prev, &vidq->active, vb.queue) { - list_del(&buf->vb.queue); - buf->vb.state = VIDEOBUF_ERROR; - wake_up(&buf->vb.done); - } - mod_timer(&vidq->timeout, jiffies+BUFFER_TIMEOUT); - return 0; - } - - prev = NULL; - for (;;) { - if (list_empty(&vidq->queued)) - return 0; - buf = list_entry(vidq->queued.next, struct viu_buf, vb.queue); - if (prev == NULL) { - list_move_tail(&buf->vb.queue, &vidq->active); - - dprintk(1, "Restarting video dma\n"); - viu_stop_dma(vidq->dev); - viu_start_dma(vidq->dev); - - buf->vb.state = VIDEOBUF_ACTIVE; - mod_timer(&vidq->timeout, jiffies+BUFFER_TIMEOUT); - dprintk(2, "[%p/%d] restart_queue - first active\n", - buf, buf->vb.i); - - } else if (prev->vb.width == buf->vb.width && - prev->vb.height == buf->vb.height && - prev->fmt == buf->fmt) { - list_move_tail(&buf->vb.queue, &vidq->active); - buf->vb.state = VIDEOBUF_ACTIVE; - dprintk(2, "[%p/%d] restart_queue - move to active\n", - buf, buf->vb.i); - } else { - return 0; - } - prev = buf; - } -} - -static void viu_vid_timeout(struct timer_list *t) -{ - struct viu_dev *dev = from_timer(dev, t, vidq.timeout); - struct viu_buf *buf; - struct viu_dmaqueue *vidq = &dev->vidq; - - while (!list_empty(&vidq->active)) { - buf = list_entry(vidq->active.next, struct viu_buf, vb.queue); - list_del(&buf->vb.queue); - buf->vb.state = VIDEOBUF_ERROR; - wake_up(&buf->vb.done); - dprintk(1, "viu/0: [%p/%d] timeout\n", buf, buf->vb.i); - } - - restart_video_queue(vidq); -} - -/* - * Videobuf operations - */ -static int buffer_setup(struct videobuf_queue *vq, unsigned int *count, - unsigned int *size) -{ - struct viu_fh *fh = vq->priv_data; - - *size = fh->width * fh->height * fh->fmt->depth >> 3; - if (*count == 0) - *count = 32; - - while (*size * *count > VIU_VID_MEM_LIMIT * 1024 * 1024) - (*count)--; - - dprintk(1, "%s, count=%d, size=%d\n", __func__, *count, *size); - return 0; -} - -static void free_buffer(struct videobuf_queue *vq, struct viu_buf *buf) -{ - struct videobuf_buffer *vb = &buf->vb; - void *vaddr = NULL; - - videobuf_waiton(vq, &buf->vb, 0, 0); - - if (vq->int_ops && vq->int_ops->vaddr) - vaddr = vq->int_ops->vaddr(vb); - - if (vaddr) - videobuf_dma_contig_free(vq, &buf->vb); - - buf->vb.state = VIDEOBUF_NEEDS_INIT; -} - -inline int buffer_activate(struct viu_dev *dev, struct viu_buf *buf) -{ - struct viu_reg __iomem *vr = dev->vr; - int bpp; - - /* setup the DMA base address */ - reg_val.field_base_addr = videobuf_to_dma_contig(&buf->vb); - - dprintk(1, "buffer_activate [%p/%d]: dma addr 0x%lx\n", - buf, buf->vb.i, (unsigned long)reg_val.field_base_addr); - - /* interlace is on by default, set horizontal DMA increment */ - reg_val.status_cfg = 0; - bpp = buf->fmt->depth >> 3; - switch (bpp) { - case 2: - reg_val.status_cfg &= ~MODE_32BIT; - reg_val.dma_inc = buf->vb.width * 2; - break; - case 4: - reg_val.status_cfg |= MODE_32BIT; - reg_val.dma_inc = buf->vb.width * 4; - break; - default: - dprintk(0, "doesn't support color depth(%d)\n", - bpp * 8); - return -EINVAL; - } - - /* setup picture_count register */ - reg_val.picture_count = (buf->vb.height / 2) << 16 | - buf->vb.width; - - reg_val.status_cfg |= DMA_ACT | INT_DMA_END_EN | INT_FIELD_EN; - - buf->vb.state = VIDEOBUF_ACTIVE; - dev->capfield = buf->vb.field; - - /* reset dma increment if needed */ - if (!V4L2_FIELD_HAS_BOTH(buf->vb.field)) - reg_val.dma_inc = 0; - - iowrite32be(reg_val.dma_inc, &vr->dma_inc); - iowrite32be(reg_val.picture_count, &vr->picture_count); - iowrite32be(reg_val.field_base_addr, &vr->field_base_addr); - mod_timer(&dev->vidq.timeout, jiffies + BUFFER_TIMEOUT); - return 0; -} - -static int buffer_prepare(struct videobuf_queue *vq, - struct videobuf_buffer *vb, - enum v4l2_field field) -{ - struct viu_fh *fh = vq->priv_data; - struct viu_buf *buf = container_of(vb, struct viu_buf, vb); - int rc; - - BUG_ON(fh->fmt == NULL); - - if (fh->width < 48 || fh->width > norm_maxw() || - fh->height < 32 || fh->height > norm_maxh()) - return -EINVAL; - buf->vb.size = (fh->width * fh->height * fh->fmt->depth) >> 3; - if (buf->vb.baddr != 0 && buf->vb.bsize < buf->vb.size) - return -EINVAL; - - if (buf->fmt != fh->fmt || - buf->vb.width != fh->width || - buf->vb.height != fh->height || - buf->vb.field != field) { - buf->fmt = fh->fmt; - buf->vb.width = fh->width; - buf->vb.height = fh->height; - buf->vb.field = field; - } - - if (buf->vb.state == VIDEOBUF_NEEDS_INIT) { - rc = videobuf_iolock(vq, &buf->vb, NULL); - if (rc != 0) - goto fail; - - buf->vb.width = fh->width; - buf->vb.height = fh->height; - buf->vb.field = field; - buf->fmt = fh->fmt; - } - - buf->vb.state = VIDEOBUF_PREPARED; - return 0; - -fail: - free_buffer(vq, buf); - return rc; -} - -static void buffer_queue(struct videobuf_queue *vq, struct videobuf_buffer *vb) -{ - struct viu_buf *buf = container_of(vb, struct viu_buf, vb); - struct viu_fh *fh = vq->priv_data; - struct viu_dev *dev = fh->dev; - struct viu_dmaqueue *vidq = &dev->vidq; - struct viu_buf *prev; - - if (!list_empty(&vidq->queued)) { - dprintk(1, "adding vb queue=%p\n", &buf->vb.queue); - dprintk(1, "vidq pointer 0x%p, queued 0x%p\n", - vidq, &vidq->queued); - dprintk(1, "dev %p, queued: self %p, next %p, head %p\n", - dev, &vidq->queued, vidq->queued.next, - vidq->queued.prev); - list_add_tail(&buf->vb.queue, &vidq->queued); - buf->vb.state = VIDEOBUF_QUEUED; - dprintk(2, "[%p/%d] buffer_queue - append to queued\n", - buf, buf->vb.i); - } else if (list_empty(&vidq->active)) { - dprintk(1, "adding vb active=%p\n", &buf->vb.queue); - list_add_tail(&buf->vb.queue, &vidq->active); - buf->vb.state = VIDEOBUF_ACTIVE; - mod_timer(&vidq->timeout, jiffies+BUFFER_TIMEOUT); - dprintk(2, "[%p/%d] buffer_queue - first active\n", - buf, buf->vb.i); - - buffer_activate(dev, buf); - } else { - dprintk(1, "adding vb queue2=%p\n", &buf->vb.queue); - prev = list_entry(vidq->active.prev, struct viu_buf, vb.queue); - if (prev->vb.width == buf->vb.width && - prev->vb.height == buf->vb.height && - prev->fmt == buf->fmt) { - list_add_tail(&buf->vb.queue, &vidq->active); - buf->vb.state = VIDEOBUF_ACTIVE; - dprintk(2, "[%p/%d] buffer_queue - append to active\n", - buf, buf->vb.i); - } else { - list_add_tail(&buf->vb.queue, &vidq->queued); - buf->vb.state = VIDEOBUF_QUEUED; - dprintk(2, "[%p/%d] buffer_queue - first queued\n", - buf, buf->vb.i); - } - } -} - -static void buffer_release(struct videobuf_queue *vq, - struct videobuf_buffer *vb) -{ - struct viu_buf *buf = container_of(vb, struct viu_buf, vb); - struct viu_fh *fh = vq->priv_data; - struct viu_dev *dev = (struct viu_dev *)fh->dev; - - viu_stop_dma(dev); - free_buffer(vq, buf); -} - -static const struct videobuf_queue_ops viu_video_qops = { - .buf_setup = buffer_setup, - .buf_prepare = buffer_prepare, - .buf_queue = buffer_queue, - .buf_release = buffer_release, -}; - -/* - * IOCTL vidioc handling - */ -static int vidioc_querycap(struct file *file, void *priv, - struct v4l2_capability *cap) -{ - strscpy(cap->driver, "viu", sizeof(cap->driver)); - strscpy(cap->card, "viu", sizeof(cap->card)); - strscpy(cap->bus_info, "platform:viu", sizeof(cap->bus_info)); - return 0; -} - -static int vidioc_enum_fmt(struct file *file, void *priv, - struct v4l2_fmtdesc *f) -{ - int index = f->index; - - if (f->index >= NUM_FORMATS) - return -EINVAL; - - f->pixelformat = formats[index].fourcc; - return 0; -} - -static int vidioc_g_fmt_cap(struct file *file, void *priv, - struct v4l2_format *f) -{ - struct viu_fh *fh = priv; - - f->fmt.pix.width = fh->width; - f->fmt.pix.height = fh->height; - f->fmt.pix.field = fh->vb_vidq.field; - f->fmt.pix.pixelformat = fh->fmt->pixelformat; - f->fmt.pix.bytesperline = - (f->fmt.pix.width * fh->fmt->depth) >> 3; - f->fmt.pix.sizeimage = fh->sizeimage; - f->fmt.pix.colorspace = V4L2_COLORSPACE_SMPTE170M; - return 0; -} - -static int vidioc_try_fmt_cap(struct file *file, void *priv, - struct v4l2_format *f) -{ - struct viu_fmt *fmt; - unsigned int maxw, maxh; - - fmt = format_by_fourcc(f->fmt.pix.pixelformat); - if (!fmt) { - dprintk(1, "Fourcc format (0x%08x) invalid.", - f->fmt.pix.pixelformat); - return -EINVAL; - } - - maxw = norm_maxw(); - maxh = norm_maxh(); - - f->fmt.pix.field = V4L2_FIELD_INTERLACED; - if (f->fmt.pix.height < 32) - f->fmt.pix.height = 32; - if (f->fmt.pix.height > maxh) - f->fmt.pix.height = maxh; - if (f->fmt.pix.width < 48) - f->fmt.pix.width = 48; - if (f->fmt.pix.width > maxw) - f->fmt.pix.width = maxw; - f->fmt.pix.width &= ~0x03; - f->fmt.pix.bytesperline = - (f->fmt.pix.width * fmt->depth) >> 3; - f->fmt.pix.sizeimage = f->fmt.pix.height * f->fmt.pix.bytesperline; - f->fmt.pix.colorspace = V4L2_COLORSPACE_SMPTE170M; - - return 0; -} - -static int vidioc_s_fmt_cap(struct file *file, void *priv, - struct v4l2_format *f) -{ - struct viu_fh *fh = priv; - int ret; - - ret = vidioc_try_fmt_cap(file, fh, f); - if (ret < 0) - return ret; - - fh->fmt = format_by_fourcc(f->fmt.pix.pixelformat); - fh->width = f->fmt.pix.width; - fh->height = f->fmt.pix.height; - fh->sizeimage = f->fmt.pix.sizeimage; - fh->vb_vidq.field = f->fmt.pix.field; - fh->type = f->type; - return 0; -} - -static int vidioc_g_fmt_overlay(struct file *file, void *priv, - struct v4l2_format *f) -{ - struct viu_fh *fh = priv; - - f->fmt.win = fh->win; - return 0; -} - -static int verify_preview(struct viu_dev *dev, struct v4l2_window *win) -{ - enum v4l2_field field; - int maxw, maxh; - - if (dev->ovbuf.base == NULL) - return -EINVAL; - if (dev->ovfmt == NULL) - return -EINVAL; - if (win->w.width < 48 || win->w.height < 32) - return -EINVAL; - - field = win->field; - maxw = dev->crop_current.width; - maxh = dev->crop_current.height; - - if (field == V4L2_FIELD_ANY) { - field = (win->w.height > maxh/2) - ? V4L2_FIELD_INTERLACED - : V4L2_FIELD_TOP; - } - switch (field) { - case V4L2_FIELD_TOP: - case V4L2_FIELD_BOTTOM: - maxh = maxh / 2; - break; - case V4L2_FIELD_INTERLACED: - break; - default: - return -EINVAL; - } - - win->field = field; - if (win->w.width > maxw) - win->w.width = maxw; - if (win->w.height > maxh) - win->w.height = maxh; - return 0; -} - -inline void viu_activate_overlay(struct viu_reg __iomem *vr) -{ - iowrite32be(reg_val.field_base_addr, &vr->field_base_addr); - iowrite32be(reg_val.dma_inc, &vr->dma_inc); - iowrite32be(reg_val.picture_count, &vr->picture_count); -} - -static int viu_setup_preview(struct viu_dev *dev, struct viu_fh *fh) -{ - int bpp; - - dprintk(1, "%s %dx%d\n", __func__, - fh->win.w.width, fh->win.w.height); - - reg_val.status_cfg = 0; - - /* setup window */ - reg_val.picture_count = (fh->win.w.height / 2) << 16 | - fh->win.w.width; - - /* setup color depth and dma increment */ - bpp = dev->ovfmt->depth / 8; - switch (bpp) { - case 2: - reg_val.status_cfg &= ~MODE_32BIT; - reg_val.dma_inc = fh->win.w.width * 2; - break; - case 4: - reg_val.status_cfg |= MODE_32BIT; - reg_val.dma_inc = fh->win.w.width * 4; - break; - default: - dprintk(0, "device doesn't support color depth(%d)\n", - bpp * 8); - return -EINVAL; - } - - dev->ovfield = fh->win.field; - if (!V4L2_FIELD_HAS_BOTH(dev->ovfield)) - reg_val.dma_inc = 0; - - reg_val.status_cfg |= DMA_ACT | INT_DMA_END_EN | INT_FIELD_EN; - - /* setup the base address of the overlay buffer */ - reg_val.field_base_addr = (u32)(long)dev->ovbuf.base; - - return 0; -} - -static int vidioc_s_fmt_overlay(struct file *file, void *priv, - struct v4l2_format *f) -{ - struct viu_fh *fh = priv; - struct viu_dev *dev = (struct viu_dev *)fh->dev; - unsigned long flags; - int err; - - err = verify_preview(dev, &f->fmt.win); - if (err) - return err; - - fh->win = f->fmt.win; - - spin_lock_irqsave(&dev->slock, flags); - viu_setup_preview(dev, fh); - spin_unlock_irqrestore(&dev->slock, flags); - return 0; -} - -static int vidioc_try_fmt_overlay(struct file *file, void *priv, - struct v4l2_format *f) -{ - return 0; -} - -static int vidioc_overlay(struct file *file, void *priv, unsigned int on) -{ - struct viu_fh *fh = priv; - struct viu_dev *dev = (struct viu_dev *)fh->dev; - unsigned long flags; - - if (on) { - spin_lock_irqsave(&dev->slock, flags); - viu_activate_overlay(dev->vr); - dev->ovenable = 1; - - /* start dma */ - viu_start_dma(dev); - spin_unlock_irqrestore(&dev->slock, flags); - } else { - viu_stop_dma(dev); - dev->ovenable = 0; - } - - return 0; -} - -static int vidioc_g_fbuf(struct file *file, void *priv, struct v4l2_framebuffer *arg) -{ - struct viu_fh *fh = priv; - struct viu_dev *dev = fh->dev; - struct v4l2_framebuffer *fb = arg; - - *fb = dev->ovbuf; - fb->capability = V4L2_FBUF_CAP_LIST_CLIPPING; - return 0; -} - -static int vidioc_s_fbuf(struct file *file, void *priv, const struct v4l2_framebuffer *arg) -{ - struct viu_fh *fh = priv; - struct viu_dev *dev = fh->dev; - const struct v4l2_framebuffer *fb = arg; - struct viu_fmt *fmt; - - if (!capable(CAP_SYS_ADMIN) && !capable(CAP_SYS_RAWIO)) - return -EPERM; - - /* check args */ - fmt = format_by_fourcc(fb->fmt.pixelformat); - if (fmt == NULL) - return -EINVAL; - - /* ok, accept it */ - dev->ovbuf = *fb; - dev->ovfmt = fmt; - if (dev->ovbuf.fmt.bytesperline == 0) { - dev->ovbuf.fmt.bytesperline = - dev->ovbuf.fmt.width * fmt->depth / 8; - } - return 0; -} - -static int vidioc_reqbufs(struct file *file, void *priv, - struct v4l2_requestbuffers *p) -{ - struct viu_fh *fh = priv; - - return videobuf_reqbufs(&fh->vb_vidq, p); -} - -static int vidioc_querybuf(struct file *file, void *priv, - struct v4l2_buffer *p) -{ - struct viu_fh *fh = priv; - - return videobuf_querybuf(&fh->vb_vidq, p); -} - -static int vidioc_qbuf(struct file *file, void *priv, struct v4l2_buffer *p) -{ - struct viu_fh *fh = priv; - - return videobuf_qbuf(&fh->vb_vidq, p); -} - -static int vidioc_dqbuf(struct file *file, void *priv, struct v4l2_buffer *p) -{ - struct viu_fh *fh = priv; - - return videobuf_dqbuf(&fh->vb_vidq, p, - file->f_flags & O_NONBLOCK); -} - -static int vidioc_streamon(struct file *file, void *priv, enum v4l2_buf_type i) -{ - struct viu_fh *fh = priv; - struct viu_dev *dev = fh->dev; - - if (fh->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) - return -EINVAL; - if (fh->type != i) - return -EINVAL; - - if (dev->ovenable) - dev->ovenable = 0; - - viu_start_dma(fh->dev); - - return videobuf_streamon(&fh->vb_vidq); -} - -static int vidioc_streamoff(struct file *file, void *priv, enum v4l2_buf_type i) -{ - struct viu_fh *fh = priv; - - if (fh->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) - return -EINVAL; - if (fh->type != i) - return -EINVAL; - - viu_stop_dma(fh->dev); - - return videobuf_streamoff(&fh->vb_vidq); -} - -#define decoder_call(viu, o, f, args...) \ - v4l2_subdev_call(viu->decoder, o, f, ##args) - -static int vidioc_querystd(struct file *file, void *priv, v4l2_std_id *std_id) -{ - struct viu_fh *fh = priv; - - decoder_call(fh->dev, video, querystd, std_id); - return 0; -} - -static int vidioc_s_std(struct file *file, void *priv, v4l2_std_id id) -{ - struct viu_fh *fh = priv; - - fh->dev->std = id; - decoder_call(fh->dev, video, s_std, id); - return 0; -} - -static int vidioc_g_std(struct file *file, void *priv, v4l2_std_id *std_id) -{ - struct viu_fh *fh = priv; - - *std_id = fh->dev->std; - return 0; -} - -/* only one input in this driver */ -static int vidioc_enum_input(struct file *file, void *priv, - struct v4l2_input *inp) -{ - struct viu_fh *fh = priv; - - if (inp->index != 0) - return -EINVAL; - - inp->type = V4L2_INPUT_TYPE_CAMERA; - inp->std = fh->dev->vdev->tvnorms; - strscpy(inp->name, "Camera", sizeof(inp->name)); - return 0; -} - -static int vidioc_g_input(struct file *file, void *priv, unsigned int *i) -{ - *i = 0; - return 0; -} - -static int vidioc_s_input(struct file *file, void *priv, unsigned int i) -{ - struct viu_fh *fh = priv; - - if (i) - return -EINVAL; - - decoder_call(fh->dev, video, s_routing, i, 0, 0); - return 0; -} - -inline void viu_activate_next_buf(struct viu_dev *dev, - struct viu_dmaqueue *viuq) -{ - struct viu_dmaqueue *vidq = viuq; - struct viu_buf *buf; - - /* launch another DMA operation for an active/queued buffer */ - if (!list_empty(&vidq->active)) { - buf = list_entry(vidq->active.next, struct viu_buf, - vb.queue); - dprintk(1, "start another queued buffer: 0x%p\n", buf); - buffer_activate(dev, buf); - } else if (!list_empty(&vidq->queued)) { - buf = list_entry(vidq->queued.next, struct viu_buf, - vb.queue); - list_del(&buf->vb.queue); - - dprintk(1, "start another queued buffer: 0x%p\n", buf); - list_add_tail(&buf->vb.queue, &vidq->active); - buf->vb.state = VIDEOBUF_ACTIVE; - buffer_activate(dev, buf); - } -} - -inline void viu_default_settings(struct viu_reg __iomem *vr) -{ - iowrite32be(0x9512A254, &vr->luminance); - iowrite32be(0x03310000, &vr->chroma_r); - iowrite32be(0x06600F38, &vr->chroma_g); - iowrite32be(0x00000409, &vr->chroma_b); - iowrite32be(0x000000ff, &vr->alpha); - iowrite32be(0x00000090, &vr->req_alarm); - dprintk(1, "status reg: 0x%08x, field base: 0x%08x\n", - ioread32be(&vr->status_cfg), ioread32be(&vr->field_base_addr)); -} - -static void viu_overlay_intr(struct viu_dev *dev, u32 status) -{ - struct viu_reg __iomem *vr = dev->vr; - - if (status & INT_DMA_END_STATUS) - dev->dma_done = 1; - - if (status & INT_FIELD_STATUS) { - if (dev->dma_done) { - u32 addr = reg_val.field_base_addr; - - dev->dma_done = 0; - if (status & FIELD_NO) - addr += reg_val.dma_inc; - - iowrite32be(addr, &vr->field_base_addr); - iowrite32be(reg_val.dma_inc, &vr->dma_inc); - iowrite32be((status & 0xffc0ffff) | - (status & INT_ALL_STATUS) | - reg_val.status_cfg, &vr->status_cfg); - } else if (status & INT_VSYNC_STATUS) { - iowrite32be((status & 0xffc0ffff) | - (status & INT_ALL_STATUS) | - reg_val.status_cfg, &vr->status_cfg); - } - } -} - -static void viu_capture_intr(struct viu_dev *dev, u32 status) -{ - struct viu_dmaqueue *vidq = &dev->vidq; - struct viu_reg __iomem *vr = dev->vr; - struct viu_buf *buf; - int field_num; - int need_two; - int dma_done = 0; - - field_num = status & FIELD_NO; - need_two = V4L2_FIELD_HAS_BOTH(dev->capfield); - - if (status & INT_DMA_END_STATUS) { - dma_done = 1; - if (((field_num == 0) && (dev->field == 0)) || - (field_num && (dev->field == 1))) - dev->field++; - } - - if (status & INT_FIELD_STATUS) { - dprintk(1, "irq: field %d, done %d\n", - !!field_num, dma_done); - if (unlikely(dev->first)) { - if (field_num == 0) { - dev->first = 0; - dprintk(1, "activate first buf\n"); - viu_activate_next_buf(dev, vidq); - } else - dprintk(1, "wait field 0\n"); - return; - } - - /* setup buffer address for next dma operation */ - if (!list_empty(&vidq->active)) { - u32 addr = reg_val.field_base_addr; - - if (field_num && need_two) { - addr += reg_val.dma_inc; - dprintk(1, "field 1, 0x%lx, dev field %d\n", - (unsigned long)addr, dev->field); - } - iowrite32be(addr, &vr->field_base_addr); - iowrite32be(reg_val.dma_inc, &vr->dma_inc); - iowrite32be((status & 0xffc0ffff) | - (status & INT_ALL_STATUS) | - reg_val.status_cfg, &vr->status_cfg); - return; - } - } - - if (dma_done && field_num && (dev->field == 2)) { - dev->field = 0; - buf = list_entry(vidq->active.next, - struct viu_buf, vb.queue); - dprintk(1, "viu/0: [%p/%d] 0x%lx/0x%lx: dma complete\n", - buf, buf->vb.i, - (unsigned long)videobuf_to_dma_contig(&buf->vb), - (unsigned long)ioread32be(&vr->field_base_addr)); - - if (waitqueue_active(&buf->vb.done)) { - list_del(&buf->vb.queue); - buf->vb.ts = ktime_get_ns(); - buf->vb.state = VIDEOBUF_DONE; - buf->vb.field_count++; - wake_up(&buf->vb.done); - } - /* activate next dma buffer */ - viu_activate_next_buf(dev, vidq); - } -} - -static irqreturn_t viu_intr(int irq, void *dev_id) -{ - struct viu_dev *dev = (struct viu_dev *)dev_id; - struct viu_reg __iomem *vr = dev->vr; - u32 status; - u32 error; - - status = ioread32be(&vr->status_cfg); - - if (status & INT_ERROR_STATUS) { - dev->irqs.error_irq++; - error = status & ERR_MASK; - if (error) - dprintk(1, "Err: error(%d), times:%d!\n", - error >> 4, dev->irqs.error_irq); - /* Clear interrupt error bit and error flags */ - iowrite32be((status & 0xffc0ffff) | INT_ERROR_STATUS, - &vr->status_cfg); - } - - if (status & INT_DMA_END_STATUS) { - dev->irqs.dma_end_irq++; - dev->dma_done = 1; - dprintk(2, "VIU DMA end interrupt times: %d\n", - dev->irqs.dma_end_irq); - } - - if (status & INT_HSYNC_STATUS) - dev->irqs.hsync_irq++; - - if (status & INT_FIELD_STATUS) { - dev->irqs.field_irq++; - dprintk(2, "VIU field interrupt times: %d\n", - dev->irqs.field_irq); - } - - if (status & INT_VSTART_STATUS) - dev->irqs.vstart_irq++; - - if (status & INT_VSYNC_STATUS) { - dev->irqs.vsync_irq++; - dprintk(2, "VIU vsync interrupt times: %d\n", - dev->irqs.vsync_irq); - } - - /* clear all pending irqs */ - status = ioread32be(&vr->status_cfg); - iowrite32be((status & 0xffc0ffff) | (status & INT_ALL_STATUS), - &vr->status_cfg); - - if (dev->ovenable) { - viu_overlay_intr(dev, status); - return IRQ_HANDLED; - } - - /* Capture mode */ - viu_capture_intr(dev, status); - return IRQ_HANDLED; -} - -/* - * File operations for the device - */ -static int viu_open(struct file *file) -{ - struct video_device *vdev = video_devdata(file); - struct viu_dev *dev = video_get_drvdata(vdev); - struct viu_fh *fh; - struct viu_reg __iomem *vr; - int minor = vdev->minor; - u32 status_cfg; - - dprintk(1, "viu: open (minor=%d)\n", minor); - - dev->users++; - if (dev->users > 1) { - dev->users--; - return -EBUSY; - } - - vr = dev->vr; - - dprintk(1, "open minor=%d type=%s users=%d\n", minor, - v4l2_type_names[V4L2_BUF_TYPE_VIDEO_CAPTURE], dev->users); - - if (mutex_lock_interruptible(&dev->lock)) { - dev->users--; - return -ERESTARTSYS; - } - - /* allocate and initialize per filehandle data */ - fh = kzalloc(sizeof(*fh), GFP_KERNEL); - if (!fh) { - dev->users--; - mutex_unlock(&dev->lock); - return -ENOMEM; - } - - v4l2_fh_init(&fh->fh, vdev); - file->private_data = fh; - fh->dev = dev; - - fh->type = V4L2_BUF_TYPE_VIDEO_CAPTURE; - fh->fmt = format_by_fourcc(V4L2_PIX_FMT_RGB32); - fh->width = norm_maxw(); - fh->height = norm_maxh(); - dev->crop_current.width = fh->width; - dev->crop_current.height = fh->height; - - dprintk(1, "Open: fh=%p, dev=%p, dev->vidq=%p\n", fh, dev, &dev->vidq); - dprintk(1, "Open: list_empty queued=%d\n", - list_empty(&dev->vidq.queued)); - dprintk(1, "Open: list_empty active=%d\n", - list_empty(&dev->vidq.active)); - - viu_default_settings(vr); - - status_cfg = ioread32be(&vr->status_cfg); - iowrite32be(status_cfg & ~(INT_VSYNC_EN | INT_HSYNC_EN | - INT_FIELD_EN | INT_VSTART_EN | - INT_DMA_END_EN | INT_ERROR_EN | INT_ECC_EN), - &vr->status_cfg); - - status_cfg = ioread32be(&vr->status_cfg); - iowrite32be(status_cfg | INT_ALL_STATUS, &vr->status_cfg); - - spin_lock_init(&fh->vbq_lock); - videobuf_queue_dma_contig_init(&fh->vb_vidq, &viu_video_qops, - dev->dev, &fh->vbq_lock, - fh->type, V4L2_FIELD_INTERLACED, - sizeof(struct viu_buf), fh, - &fh->dev->lock); - v4l2_fh_add(&fh->fh); - mutex_unlock(&dev->lock); - return 0; -} - -static ssize_t viu_read(struct file *file, char __user *data, size_t count, - loff_t *ppos) -{ - struct viu_fh *fh = file->private_data; - struct viu_dev *dev = fh->dev; - int ret = 0; - - dprintk(2, "%s\n", __func__); - if (dev->ovenable) - dev->ovenable = 0; - - if (fh->type == V4L2_BUF_TYPE_VIDEO_CAPTURE) { - if (mutex_lock_interruptible(&dev->lock)) - return -ERESTARTSYS; - viu_start_dma(dev); - ret = videobuf_read_stream(&fh->vb_vidq, data, count, - ppos, 0, file->f_flags & O_NONBLOCK); - mutex_unlock(&dev->lock); - return ret; - } - return 0; -} - -static __poll_t viu_poll(struct file *file, struct poll_table_struct *wait) -{ - struct viu_fh *fh = file->private_data; - struct videobuf_queue *q = &fh->vb_vidq; - struct viu_dev *dev = fh->dev; - __poll_t req_events = poll_requested_events(wait); - __poll_t res = v4l2_ctrl_poll(file, wait); - - if (V4L2_BUF_TYPE_VIDEO_CAPTURE != fh->type) - return EPOLLERR; - - if (!(req_events & (EPOLLIN | EPOLLRDNORM))) - return res; - - mutex_lock(&dev->lock); - res |= videobuf_poll_stream(file, q, wait); - mutex_unlock(&dev->lock); - return res; -} - -static int viu_release(struct file *file) -{ - struct viu_fh *fh = file->private_data; - struct viu_dev *dev = fh->dev; - int minor = video_devdata(file)->minor; - - mutex_lock(&dev->lock); - viu_stop_dma(dev); - videobuf_stop(&fh->vb_vidq); - videobuf_mmap_free(&fh->vb_vidq); - v4l2_fh_del(&fh->fh); - v4l2_fh_exit(&fh->fh); - mutex_unlock(&dev->lock); - - kfree(fh); - - dev->users--; - dprintk(1, "close (minor=%d, users=%d)\n", - minor, dev->users); - return 0; -} - -static void viu_reset(struct viu_reg __iomem *reg) -{ - iowrite32be(0, ®->status_cfg); - iowrite32be(0x9512a254, ®->luminance); - iowrite32be(0x03310000, ®->chroma_r); - iowrite32be(0x06600f38, ®->chroma_g); - iowrite32be(0x00000409, ®->chroma_b); - iowrite32be(0, ®->field_base_addr); - iowrite32be(0, ®->dma_inc); - iowrite32be(0x01e002d0, ®->picture_count); - iowrite32be(0x00000090, ®->req_alarm); - iowrite32be(0x000000ff, ®->alpha); -} - -static int viu_mmap(struct file *file, struct vm_area_struct *vma) -{ - struct viu_fh *fh = file->private_data; - struct viu_dev *dev = fh->dev; - int ret; - - dprintk(1, "mmap called, vma=%p\n", vma); - - if (mutex_lock_interruptible(&dev->lock)) - return -ERESTARTSYS; - ret = videobuf_mmap_mapper(&fh->vb_vidq, vma); - mutex_unlock(&dev->lock); - - dprintk(1, "vma start=0x%08lx, size=%ld, ret=%d\n", - (unsigned long)vma->vm_start, - (unsigned long)vma->vm_end-(unsigned long)vma->vm_start, - ret); - - return ret; -} - -static const struct v4l2_file_operations viu_fops = { - .owner = THIS_MODULE, - .open = viu_open, - .release = viu_release, - .read = viu_read, - .poll = viu_poll, - .unlocked_ioctl = video_ioctl2, /* V4L2 ioctl handler */ - .mmap = viu_mmap, -}; - -static const struct v4l2_ioctl_ops viu_ioctl_ops = { - .vidioc_querycap = vidioc_querycap, - .vidioc_enum_fmt_vid_cap = vidioc_enum_fmt, - .vidioc_g_fmt_vid_cap = vidioc_g_fmt_cap, - .vidioc_try_fmt_vid_cap = vidioc_try_fmt_cap, - .vidioc_s_fmt_vid_cap = vidioc_s_fmt_cap, - .vidioc_enum_fmt_vid_overlay = vidioc_enum_fmt, - .vidioc_g_fmt_vid_overlay = vidioc_g_fmt_overlay, - .vidioc_try_fmt_vid_overlay = vidioc_try_fmt_overlay, - .vidioc_s_fmt_vid_overlay = vidioc_s_fmt_overlay, - .vidioc_overlay = vidioc_overlay, - .vidioc_g_fbuf = vidioc_g_fbuf, - .vidioc_s_fbuf = vidioc_s_fbuf, - .vidioc_reqbufs = vidioc_reqbufs, - .vidioc_querybuf = vidioc_querybuf, - .vidioc_qbuf = vidioc_qbuf, - .vidioc_dqbuf = vidioc_dqbuf, - .vidioc_g_std = vidioc_g_std, - .vidioc_s_std = vidioc_s_std, - .vidioc_querystd = vidioc_querystd, - .vidioc_enum_input = vidioc_enum_input, - .vidioc_g_input = vidioc_g_input, - .vidioc_s_input = vidioc_s_input, - .vidioc_streamon = vidioc_streamon, - .vidioc_streamoff = vidioc_streamoff, - .vidioc_log_status = v4l2_ctrl_log_status, - .vidioc_subscribe_event = v4l2_ctrl_subscribe_event, - .vidioc_unsubscribe_event = v4l2_event_unsubscribe, -}; - -static const struct video_device viu_template = { - .name = "FSL viu", - .fops = &viu_fops, - .minor = -1, - .ioctl_ops = &viu_ioctl_ops, - .release = video_device_release, - - .tvnorms = V4L2_STD_NTSC_M | V4L2_STD_PAL, - .device_caps = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING | - V4L2_CAP_VIDEO_OVERLAY | V4L2_CAP_READWRITE, -}; - -static int viu_of_probe(struct platform_device *op) -{ - struct viu_dev *viu_dev; - struct video_device *vdev; - struct resource r; - struct viu_reg __iomem *viu_regs; - struct i2c_adapter *ad; - int ret, viu_irq; - struct clk *clk; - - ret = of_address_to_resource(op->dev.of_node, 0, &r); - if (ret) { - dev_err(&op->dev, "Can't parse device node resource\n"); - return -ENODEV; - } - - viu_irq = irq_of_parse_and_map(op->dev.of_node, 0); - if (!viu_irq) { - dev_err(&op->dev, "Error while mapping the irq\n"); - return -EINVAL; - } - - /* request mem region */ - if (!devm_request_mem_region(&op->dev, r.start, - sizeof(struct viu_reg), DRV_NAME)) { - dev_err(&op->dev, "Error while requesting mem region\n"); - ret = -EBUSY; - goto err_irq; - } - - /* remap registers */ - viu_regs = devm_ioremap(&op->dev, r.start, sizeof(struct viu_reg)); - if (!viu_regs) { - dev_err(&op->dev, "Can't map register set\n"); - ret = -ENOMEM; - goto err_irq; - } - - /* Prepare our private structure */ - viu_dev = devm_kzalloc(&op->dev, sizeof(struct viu_dev), GFP_KERNEL); - if (!viu_dev) { - dev_err(&op->dev, "Can't allocate private structure\n"); - ret = -ENOMEM; - goto err_irq; - } - - viu_dev->vr = viu_regs; - viu_dev->irq = viu_irq; - viu_dev->dev = &op->dev; - - /* init video dma queues */ - INIT_LIST_HEAD(&viu_dev->vidq.active); - INIT_LIST_HEAD(&viu_dev->vidq.queued); - - snprintf(viu_dev->v4l2_dev.name, - sizeof(viu_dev->v4l2_dev.name), "%s", "VIU"); - ret = v4l2_device_register(viu_dev->dev, &viu_dev->v4l2_dev); - if (ret < 0) { - dev_err(&op->dev, "v4l2_device_register() failed: %d\n", ret); - goto err_irq; - } - - ad = i2c_get_adapter(0); - if (!ad) { - ret = -EFAULT; - dev_err(&op->dev, "couldn't get i2c adapter\n"); - goto err_v4l2; - } - - v4l2_ctrl_handler_init(&viu_dev->hdl, 5); - if (viu_dev->hdl.error) { - ret = viu_dev->hdl.error; - dev_err(&op->dev, "couldn't register control\n"); - goto err_i2c; - } - /* This control handler will inherit the control(s) from the - sub-device(s). */ - viu_dev->v4l2_dev.ctrl_handler = &viu_dev->hdl; - viu_dev->decoder = v4l2_i2c_new_subdev(&viu_dev->v4l2_dev, ad, - "saa7113", VIU_VIDEO_DECODER_ADDR, NULL); - - timer_setup(&viu_dev->vidq.timeout, viu_vid_timeout, 0); - viu_dev->std = V4L2_STD_NTSC_M; - viu_dev->first = 1; - - /* Allocate memory for video device */ - vdev = video_device_alloc(); - if (vdev == NULL) { - ret = -ENOMEM; - goto err_hdl; - } - - *vdev = viu_template; - - vdev->v4l2_dev = &viu_dev->v4l2_dev; - - viu_dev->vdev = vdev; - - /* initialize locks */ - mutex_init(&viu_dev->lock); - viu_dev->vdev->lock = &viu_dev->lock; - spin_lock_init(&viu_dev->slock); - - video_set_drvdata(viu_dev->vdev, viu_dev); - - mutex_lock(&viu_dev->lock); - - ret = video_register_device(viu_dev->vdev, VFL_TYPE_VIDEO, -1); - if (ret < 0) { - video_device_release(viu_dev->vdev); - goto err_unlock; - } - - /* enable VIU clock */ - clk = devm_clk_get(&op->dev, "ipg"); - if (IS_ERR(clk)) { - dev_err(&op->dev, "failed to lookup the clock!\n"); - ret = PTR_ERR(clk); - goto err_vdev; - } - ret = clk_prepare_enable(clk); - if (ret) { - dev_err(&op->dev, "failed to enable the clock!\n"); - goto err_vdev; - } - viu_dev->clk = clk; - - /* reset VIU module */ - viu_reset(viu_dev->vr); - - /* install interrupt handler */ - if (request_irq(viu_dev->irq, viu_intr, 0, "viu", (void *)viu_dev)) { - dev_err(&op->dev, "Request VIU IRQ failed.\n"); - ret = -ENODEV; - goto err_clk; - } - - mutex_unlock(&viu_dev->lock); - - dev_info(&op->dev, "Freescale VIU Video Capture Board\n"); - return ret; - -err_clk: - clk_disable_unprepare(viu_dev->clk); -err_vdev: - video_unregister_device(viu_dev->vdev); -err_unlock: - mutex_unlock(&viu_dev->lock); -err_hdl: - v4l2_ctrl_handler_free(&viu_dev->hdl); -err_i2c: - i2c_put_adapter(ad); -err_v4l2: - v4l2_device_unregister(&viu_dev->v4l2_dev); -err_irq: - irq_dispose_mapping(viu_irq); - return ret; -} - -static int viu_of_remove(struct platform_device *op) -{ - struct v4l2_device *v4l2_dev = platform_get_drvdata(op); - struct viu_dev *dev = container_of(v4l2_dev, struct viu_dev, v4l2_dev); - struct v4l2_subdev *sdev = list_entry(v4l2_dev->subdevs.next, - struct v4l2_subdev, list); - struct i2c_client *client = v4l2_get_subdevdata(sdev); - - free_irq(dev->irq, (void *)dev); - irq_dispose_mapping(dev->irq); - - clk_disable_unprepare(dev->clk); - - v4l2_ctrl_handler_free(&dev->hdl); - video_unregister_device(dev->vdev); - i2c_put_adapter(client->adapter); - v4l2_device_unregister(&dev->v4l2_dev); - return 0; -} - -#ifdef CONFIG_PM -static int viu_suspend(struct platform_device *op, pm_message_t state) -{ - struct v4l2_device *v4l2_dev = platform_get_drvdata(op); - struct viu_dev *dev = container_of(v4l2_dev, struct viu_dev, v4l2_dev); - - clk_disable(dev->clk); - return 0; -} - -static int viu_resume(struct platform_device *op) -{ - struct v4l2_device *v4l2_dev = platform_get_drvdata(op); - struct viu_dev *dev = container_of(v4l2_dev, struct viu_dev, v4l2_dev); - - clk_enable(dev->clk); - return 0; -} -#endif - -/* - * Initialization and module stuff - */ -static const struct of_device_id mpc512x_viu_of_match[] = { - { - .compatible = "fsl,mpc5121-viu", - }, - {}, -}; -MODULE_DEVICE_TABLE(of, mpc512x_viu_of_match); - -static struct platform_driver viu_of_platform_driver = { - .probe = viu_of_probe, - .remove = viu_of_remove, -#ifdef CONFIG_PM - .suspend = viu_suspend, - .resume = viu_resume, -#endif - .driver = { - .name = DRV_NAME, - .of_match_table = mpc512x_viu_of_match, - }, -}; - -module_platform_driver(viu_of_platform_driver); - -MODULE_DESCRIPTION("Freescale Video-In(VIU)"); -MODULE_AUTHOR("Hongjun Chen"); -MODULE_LICENSE("GPL"); -MODULE_VERSION(VIU_VERSION); From patchwork Wed Jan 11 10:52:49 2023 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Hans Verkuil X-Patchwork-Id: 13096399 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id 296E5C46467 for ; Wed, 11 Jan 2023 10:53:46 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S231998AbjAKKxR (ORCPT ); Wed, 11 Jan 2023 05:53:17 -0500 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:37194 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S238622AbjAKKxM (ORCPT ); Wed, 11 Jan 2023 05:53:12 -0500 Received: from ams.source.kernel.org (ams.source.kernel.org [145.40.68.75]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 29307200E for ; Wed, 11 Jan 2023 02:53:09 -0800 (PST) Received: from smtp.kernel.org (relay.kernel.org [52.25.139.140]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by ams.source.kernel.org (Postfix) with ESMTPS id 76ED9B81BB2 for ; Wed, 11 Jan 2023 10:53:07 +0000 (UTC) Received: by smtp.kernel.org (Postfix) with ESMTPSA id 59B28C433F0; Wed, 11 Jan 2023 10:53:05 +0000 (UTC) From: Hans Verkuil To: linux-media@vger.kernel.org Cc: Lad Prabhakar , Hans Verkuil Subject: [PATCH 04/13] stkwebcam: remove deprecated driver Date: Wed, 11 Jan 2023 11:52:49 +0100 Message-Id: <20230111105258.547471-5-hverkuil-cisco@xs4all.nl> X-Mailer: git-send-email 2.39.0 In-Reply-To: <20230111105258.547471-1-hverkuil-cisco@xs4all.nl> References: <20230111105258.547471-1-hverkuil-cisco@xs4all.nl> MIME-Version: 1.0 Precedence: bulk List-ID: X-Mailing-List: linux-media@vger.kernel.org The stkwebcam driver does not use the vb2 framework for streaming video, instead it implements this in the driver. This is error prone, and nobody stepped in to convert this driver to that framework. The hardware is very old, so the decision was made to remove it altogether. Signed-off-by: Hans Verkuil --- .../admin-guide/media/other-usb-cardlist.rst | 1 - .../admin-guide/media/usb-cardlist.rst | 1 - drivers/staging/media/Kconfig | 1 - drivers/staging/media/Makefile | 1 - .../media/deprecated/stkwebcam/Kconfig | 18 - .../media/deprecated/stkwebcam/Makefile | 5 - .../staging/media/deprecated/stkwebcam/TODO | 12 - .../media/deprecated/stkwebcam/stk-sensor.c | 587 ------- .../media/deprecated/stkwebcam/stk-webcam.c | 1434 ----------------- .../media/deprecated/stkwebcam/stk-webcam.h | 123 -- 10 files changed, 2183 deletions(-) delete mode 100644 drivers/staging/media/deprecated/stkwebcam/Kconfig delete mode 100644 drivers/staging/media/deprecated/stkwebcam/Makefile delete mode 100644 drivers/staging/media/deprecated/stkwebcam/TODO delete mode 100644 drivers/staging/media/deprecated/stkwebcam/stk-sensor.c delete mode 100644 drivers/staging/media/deprecated/stkwebcam/stk-webcam.c delete mode 100644 drivers/staging/media/deprecated/stkwebcam/stk-webcam.h diff --git a/Documentation/admin-guide/media/other-usb-cardlist.rst b/Documentation/admin-guide/media/other-usb-cardlist.rst index 51ca863a8601..843f1c509cbc 100644 --- a/Documentation/admin-guide/media/other-usb-cardlist.rst +++ b/Documentation/admin-guide/media/other-usb-cardlist.rst @@ -64,7 +64,6 @@ pwc Visionite VCS-UC300 0d81:1900 pwc Visionite VCS-UM100 0d81:1910 s2255drv Sensoray 2255 1943:2255, 1943:2257 stk1160 STK1160 USB video capture dongle 05e1:0408 -stkwebcam Syntek DC1125 174f:a311, 05e1:0501 dvb-ttusb-budget Technotrend/Hauppauge Nova-USB devices 0b48:1003, 0b48:1004, 0b48:1005 dvb-ttusb_dec Technotrend/Hauppauge MPEG decoder 0b48:1006 diff --git a/Documentation/admin-guide/media/usb-cardlist.rst b/Documentation/admin-guide/media/usb-cardlist.rst index af05dbecde0c..d5fd7249033d 100644 --- a/Documentation/admin-guide/media/usb-cardlist.rst +++ b/Documentation/admin-guide/media/usb-cardlist.rst @@ -92,7 +92,6 @@ pwc USB Philips Cameras s2250 Sensoray 2250/2251 s2255drv USB Sensoray 2255 video capture device smsusb Siano SMS1xxx based MDTV receiver -stkwebcam USB Syntek DC1125 Camera tm6000-alsa TV Master TM5600/6000/6010 audio tm6000-dvb DVB Support for tm6000 based TV cards tm6000 TV Master TM5600/6000/6010 driver diff --git a/drivers/staging/media/Kconfig b/drivers/staging/media/Kconfig index 257bb35af36f..d1c7e7597a10 100644 --- a/drivers/staging/media/Kconfig +++ b/drivers/staging/media/Kconfig @@ -53,7 +53,6 @@ menuconfig STAGING_MEDIA_DEPRECATED if STAGING_MEDIA_DEPRECATED source "drivers/staging/media/deprecated/atmel/Kconfig" source "drivers/staging/media/deprecated/saa7146/Kconfig" -source "drivers/staging/media/deprecated/stkwebcam/Kconfig" source "drivers/staging/media/deprecated/tm6000/Kconfig" source "drivers/staging/media/deprecated/vpfe_capture/Kconfig" source "drivers/staging/media/deprecated/zr364xx/Kconfig" diff --git a/drivers/staging/media/Makefile b/drivers/staging/media/Makefile index 55e7479f91cf..da2e4f0fb7cb 100644 --- a/drivers/staging/media/Makefile +++ b/drivers/staging/media/Makefile @@ -6,7 +6,6 @@ obj-$(CONFIG_VIDEO_MAX96712) += max96712/ obj-$(CONFIG_VIDEO_MESON_VDEC) += meson/vdec/ obj-$(CONFIG_VIDEO_OMAP4) += omap4iss/ obj-$(CONFIG_VIDEO_ROCKCHIP_VDEC) += rkvdec/ -obj-$(CONFIG_VIDEO_STKWEBCAM) += deprecated/stkwebcam/ obj-$(CONFIG_VIDEO_SUNXI) += sunxi/ obj-$(CONFIG_VIDEO_TEGRA) += tegra-video/ obj-$(CONFIG_VIDEO_IPU3_IMGU) += ipu3/ diff --git a/drivers/staging/media/deprecated/stkwebcam/Kconfig b/drivers/staging/media/deprecated/stkwebcam/Kconfig deleted file mode 100644 index 7234498e634a..000000000000 --- a/drivers/staging/media/deprecated/stkwebcam/Kconfig +++ /dev/null @@ -1,18 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0-only -config VIDEO_STKWEBCAM - tristate "USB Syntek DC1125 Camera support (DEPRECATED)" - depends on VIDEO_DEV - depends on MEDIA_USB_SUPPORT && MEDIA_CAMERA_SUPPORT - help - Say Y here if you want to use this type of camera. - Supported devices are typically found in some Asus laptops, - with USB id 174f:a311 and 05e1:0501. Other Syntek cameras - may be supported by the stk11xx driver, from which this is - derived, see - - This driver is deprecated and is scheduled for removal by - the end of 2022. See the TODO file for more information. - - To compile this driver as a module, choose M here: the - module will be called stkwebcam. - diff --git a/drivers/staging/media/deprecated/stkwebcam/Makefile b/drivers/staging/media/deprecated/stkwebcam/Makefile deleted file mode 100644 index 17ad7b6f43d0..000000000000 --- a/drivers/staging/media/deprecated/stkwebcam/Makefile +++ /dev/null @@ -1,5 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0-only -stkwebcam-objs := stk-webcam.o stk-sensor.o - -obj-$(CONFIG_VIDEO_STKWEBCAM) += stkwebcam.o - diff --git a/drivers/staging/media/deprecated/stkwebcam/TODO b/drivers/staging/media/deprecated/stkwebcam/TODO deleted file mode 100644 index 735304a72729..000000000000 --- a/drivers/staging/media/deprecated/stkwebcam/TODO +++ /dev/null @@ -1,12 +0,0 @@ -This is a very old driver for very old hardware (specifically -laptops that use this sensor). In addition according to reports -the picture quality is quite bad. - -This is also one of the few drivers still not using the vb2 -framework (or even the old videobuf framework!), so this driver -is now deprecated with the intent of removing it altogether by -the end of 2022. - -In order to keep this driver it has to be converted to vb2. -If someone is interested in doing this work, then contact the -linux-media mailinglist (https://linuxtv.org/lists.php). diff --git a/drivers/staging/media/deprecated/stkwebcam/stk-sensor.c b/drivers/staging/media/deprecated/stkwebcam/stk-sensor.c deleted file mode 100644 index 94aa6a27f934..000000000000 --- a/drivers/staging/media/deprecated/stkwebcam/stk-sensor.c +++ /dev/null @@ -1,587 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/* stk-sensor.c: Driver for ov96xx sensor (used in some Syntek webcams) - * - * Copyright 2007-2008 Jaime Velasco Juan - * - * Some parts derived from ov7670.c: - * Copyright 2006 One Laptop Per Child Association, Inc. Written - * by Jonathan Corbet with substantial inspiration from Mark - * McClelland's ovcamchip code. - * - * Copyright 2006-7 Jonathan Corbet - * - * This file may be distributed under the terms of the GNU General - */ - -/* Controlling the sensor via the STK1125 vendor specific control interface: - * The camera uses an OmniVision sensor and the stk1125 provides an - * SCCB(i2c)-USB bridge which let us program the sensor. - * In my case the sensor id is 0x9652, it can be read from sensor's register - * 0x0A and 0x0B as follows: - * - read register #R: - * output #R to index 0x0208 - * output 0x0070 to index 0x0200 - * input 1 byte from index 0x0201 (some kind of status register) - * until its value is 0x01 - * input 1 byte from index 0x0209. This is the value of #R - * - write value V to register #R - * output #R to index 0x0204 - * output V to index 0x0205 - * output 0x0005 to index 0x0200 - * input 1 byte from index 0x0201 until its value becomes 0x04 - */ - -/* It seems the i2c bus is controlled with these registers */ - -#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt - -#include "stk-webcam.h" - -#define STK_IIC_BASE (0x0200) -# define STK_IIC_OP (STK_IIC_BASE) -# define STK_IIC_OP_TX (0x05) -# define STK_IIC_OP_RX (0x70) -# define STK_IIC_STAT (STK_IIC_BASE+1) -# define STK_IIC_STAT_TX_OK (0x04) -# define STK_IIC_STAT_RX_OK (0x01) -/* I don't know what does this register. - * when it is 0x00 or 0x01, we cannot talk to the sensor, - * other values work */ -# define STK_IIC_ENABLE (STK_IIC_BASE+2) -# define STK_IIC_ENABLE_NO (0x00) -/* This is what the driver writes in windows */ -# define STK_IIC_ENABLE_YES (0x1e) -/* - * Address of the slave. Seems like the binary driver look for the - * sensor in multiple places, attempting a reset sequence. - * We only know about the ov9650 - */ -# define STK_IIC_ADDR (STK_IIC_BASE+3) -# define STK_IIC_TX_INDEX (STK_IIC_BASE+4) -# define STK_IIC_TX_VALUE (STK_IIC_BASE+5) -# define STK_IIC_RX_INDEX (STK_IIC_BASE+8) -# define STK_IIC_RX_VALUE (STK_IIC_BASE+9) - -#define MAX_RETRIES (50) - -#define SENSOR_ADDRESS (0x60) - -/* From ov7670.c (These registers aren't fully accurate) */ - -/* Registers */ -#define REG_GAIN 0x00 /* Gain lower 8 bits (rest in vref) */ -#define REG_BLUE 0x01 /* blue gain */ -#define REG_RED 0x02 /* red gain */ -#define REG_VREF 0x03 /* Pieces of GAIN, VSTART, VSTOP */ -#define REG_COM1 0x04 /* Control 1 */ -#define COM1_CCIR656 0x40 /* CCIR656 enable */ -#define COM1_QFMT 0x20 /* QVGA/QCIF format */ -#define COM1_SKIP_0 0x00 /* Do not skip any row */ -#define COM1_SKIP_2 0x04 /* Skip 2 rows of 4 */ -#define COM1_SKIP_3 0x08 /* Skip 3 rows of 4 */ -#define REG_BAVE 0x05 /* U/B Average level */ -#define REG_GbAVE 0x06 /* Y/Gb Average level */ -#define REG_AECHH 0x07 /* AEC MS 5 bits */ -#define REG_RAVE 0x08 /* V/R Average level */ -#define REG_COM2 0x09 /* Control 2 */ -#define COM2_SSLEEP 0x10 /* Soft sleep mode */ -#define REG_PID 0x0a /* Product ID MSB */ -#define REG_VER 0x0b /* Product ID LSB */ -#define REG_COM3 0x0c /* Control 3 */ -#define COM3_SWAP 0x40 /* Byte swap */ -#define COM3_SCALEEN 0x08 /* Enable scaling */ -#define COM3_DCWEN 0x04 /* Enable downsamp/crop/window */ -#define REG_COM4 0x0d /* Control 4 */ -#define REG_COM5 0x0e /* All "reserved" */ -#define REG_COM6 0x0f /* Control 6 */ -#define REG_AECH 0x10 /* More bits of AEC value */ -#define REG_CLKRC 0x11 /* Clock control */ -#define CLK_PLL 0x80 /* Enable internal PLL */ -#define CLK_EXT 0x40 /* Use external clock directly */ -#define CLK_SCALE 0x3f /* Mask for internal clock scale */ -#define REG_COM7 0x12 /* Control 7 */ -#define COM7_RESET 0x80 /* Register reset */ -#define COM7_FMT_MASK 0x38 -#define COM7_FMT_SXGA 0x00 -#define COM7_FMT_VGA 0x40 -#define COM7_FMT_CIF 0x20 /* CIF format */ -#define COM7_FMT_QVGA 0x10 /* QVGA format */ -#define COM7_FMT_QCIF 0x08 /* QCIF format */ -#define COM7_RGB 0x04 /* bits 0 and 2 - RGB format */ -#define COM7_YUV 0x00 /* YUV */ -#define COM7_BAYER 0x01 /* Bayer format */ -#define COM7_PBAYER 0x05 /* "Processed bayer" */ -#define REG_COM8 0x13 /* Control 8 */ -#define COM8_FASTAEC 0x80 /* Enable fast AGC/AEC */ -#define COM8_AECSTEP 0x40 /* Unlimited AEC step size */ -#define COM8_BFILT 0x20 /* Band filter enable */ -#define COM8_AGC 0x04 /* Auto gain enable */ -#define COM8_AWB 0x02 /* White balance enable */ -#define COM8_AEC 0x01 /* Auto exposure enable */ -#define REG_COM9 0x14 /* Control 9 - gain ceiling */ -#define REG_COM10 0x15 /* Control 10 */ -#define COM10_HSYNC 0x40 /* HSYNC instead of HREF */ -#define COM10_PCLK_HB 0x20 /* Suppress PCLK on horiz blank */ -#define COM10_HREF_REV 0x08 /* Reverse HREF */ -#define COM10_VS_LEAD 0x04 /* VSYNC on clock leading edge */ -#define COM10_VS_NEG 0x02 /* VSYNC negative */ -#define COM10_HS_NEG 0x01 /* HSYNC negative */ -#define REG_HSTART 0x17 /* Horiz start high bits */ -#define REG_HSTOP 0x18 /* Horiz stop high bits */ -#define REG_VSTART 0x19 /* Vert start high bits */ -#define REG_VSTOP 0x1a /* Vert stop high bits */ -#define REG_PSHFT 0x1b /* Pixel delay after HREF */ -#define REG_MIDH 0x1c /* Manuf. ID high */ -#define REG_MIDL 0x1d /* Manuf. ID low */ -#define REG_MVFP 0x1e /* Mirror / vflip */ -#define MVFP_MIRROR 0x20 /* Mirror image */ -#define MVFP_FLIP 0x10 /* Vertical flip */ - -#define REG_AEW 0x24 /* AGC upper limit */ -#define REG_AEB 0x25 /* AGC lower limit */ -#define REG_VPT 0x26 /* AGC/AEC fast mode op region */ -#define REG_ADVFL 0x2d /* Insert dummy lines (LSB) */ -#define REG_ADVFH 0x2e /* Insert dummy lines (MSB) */ -#define REG_HSYST 0x30 /* HSYNC rising edge delay */ -#define REG_HSYEN 0x31 /* HSYNC falling edge delay */ -#define REG_HREF 0x32 /* HREF pieces */ -#define REG_TSLB 0x3a /* lots of stuff */ -#define TSLB_YLAST 0x04 /* UYVY or VYUY - see com13 */ -#define TSLB_BYTEORD 0x08 /* swap bytes in 16bit mode? */ -#define REG_COM11 0x3b /* Control 11 */ -#define COM11_NIGHT 0x80 /* NIght mode enable */ -#define COM11_NMFR 0x60 /* Two bit NM frame rate */ -#define COM11_HZAUTO 0x10 /* Auto detect 50/60 Hz */ -#define COM11_50HZ 0x08 /* Manual 50Hz select */ -#define COM11_EXP 0x02 -#define REG_COM12 0x3c /* Control 12 */ -#define COM12_HREF 0x80 /* HREF always */ -#define REG_COM13 0x3d /* Control 13 */ -#define COM13_GAMMA 0x80 /* Gamma enable */ -#define COM13_UVSAT 0x40 /* UV saturation auto adjustment */ -#define COM13_CMATRIX 0x10 /* Enable color matrix for RGB or YUV */ -#define COM13_UVSWAP 0x01 /* V before U - w/TSLB */ -#define REG_COM14 0x3e /* Control 14 */ -#define COM14_DCWEN 0x10 /* DCW/PCLK-scale enable */ -#define REG_EDGE 0x3f /* Edge enhancement factor */ -#define REG_COM15 0x40 /* Control 15 */ -#define COM15_R10F0 0x00 /* Data range 10 to F0 */ -#define COM15_R01FE 0x80 /* 01 to FE */ -#define COM15_R00FF 0xc0 /* 00 to FF */ -#define COM15_RGB565 0x10 /* RGB565 output */ -#define COM15_RGBFIXME 0x20 /* FIXME */ -#define COM15_RGB555 0x30 /* RGB555 output */ -#define REG_COM16 0x41 /* Control 16 */ -#define COM16_AWBGAIN 0x08 /* AWB gain enable */ -#define REG_COM17 0x42 /* Control 17 */ -#define COM17_AECWIN 0xc0 /* AEC window - must match COM4 */ -#define COM17_CBAR 0x08 /* DSP Color bar */ - -/* - * This matrix defines how the colors are generated, must be - * tweaked to adjust hue and saturation. - * - * Order: v-red, v-green, v-blue, u-red, u-green, u-blue - * - * They are nine-bit signed quantities, with the sign bit - * stored in 0x58. Sign for v-red is bit 0, and up from there. - */ -#define REG_CMATRIX_BASE 0x4f -#define CMATRIX_LEN 6 -#define REG_CMATRIX_SIGN 0x58 - - -#define REG_BRIGHT 0x55 /* Brightness */ -#define REG_CONTRAS 0x56 /* Contrast control */ - -#define REG_GFIX 0x69 /* Fix gain control */ - -#define REG_RGB444 0x8c /* RGB 444 control */ -#define R444_ENABLE 0x02 /* Turn on RGB444, overrides 5x5 */ -#define R444_RGBX 0x01 /* Empty nibble at end */ - -#define REG_HAECC1 0x9f /* Hist AEC/AGC control 1 */ -#define REG_HAECC2 0xa0 /* Hist AEC/AGC control 2 */ - -#define REG_BD50MAX 0xa5 /* 50hz banding step limit */ -#define REG_HAECC3 0xa6 /* Hist AEC/AGC control 3 */ -#define REG_HAECC4 0xa7 /* Hist AEC/AGC control 4 */ -#define REG_HAECC5 0xa8 /* Hist AEC/AGC control 5 */ -#define REG_HAECC6 0xa9 /* Hist AEC/AGC control 6 */ -#define REG_HAECC7 0xaa /* Hist AEC/AGC control 7 */ -#define REG_BD60MAX 0xab /* 60hz banding step limit */ - - - - -/* Returns 0 if OK */ -static int stk_sensor_outb(struct stk_camera *dev, u8 reg, u8 val) -{ - int i = 0; - u8 tmpval = 0; - - if (stk_camera_write_reg(dev, STK_IIC_TX_INDEX, reg)) - return 1; - if (stk_camera_write_reg(dev, STK_IIC_TX_VALUE, val)) - return 1; - if (stk_camera_write_reg(dev, STK_IIC_OP, STK_IIC_OP_TX)) - return 1; - do { - if (stk_camera_read_reg(dev, STK_IIC_STAT, &tmpval)) - return 1; - i++; - } while (tmpval == 0 && i < MAX_RETRIES); - if (tmpval != STK_IIC_STAT_TX_OK) { - if (tmpval) - pr_err("stk_sensor_outb failed, status=0x%02x\n", - tmpval); - return 1; - } else - return 0; -} - -static int stk_sensor_inb(struct stk_camera *dev, u8 reg, u8 *val) -{ - int i = 0; - u8 tmpval = 0; - - if (stk_camera_write_reg(dev, STK_IIC_RX_INDEX, reg)) - return 1; - if (stk_camera_write_reg(dev, STK_IIC_OP, STK_IIC_OP_RX)) - return 1; - do { - if (stk_camera_read_reg(dev, STK_IIC_STAT, &tmpval)) - return 1; - i++; - } while (tmpval == 0 && i < MAX_RETRIES); - if (tmpval != STK_IIC_STAT_RX_OK) { - if (tmpval) - pr_err("stk_sensor_inb failed, status=0x%02x\n", - tmpval); - return 1; - } - - if (stk_camera_read_reg(dev, STK_IIC_RX_VALUE, &tmpval)) - return 1; - - *val = tmpval; - return 0; -} - -static int stk_sensor_write_regvals(struct stk_camera *dev, - struct regval *rv) -{ - int ret; - if (rv == NULL) - return 0; - while (rv->reg != 0xff || rv->val != 0xff) { - ret = stk_sensor_outb(dev, rv->reg, rv->val); - if (ret != 0) - return ret; - rv++; - } - return 0; -} - -int stk_sensor_sleep(struct stk_camera *dev) -{ - u8 tmp; - return stk_sensor_inb(dev, REG_COM2, &tmp) - || stk_sensor_outb(dev, REG_COM2, tmp|COM2_SSLEEP); -} - -int stk_sensor_wakeup(struct stk_camera *dev) -{ - u8 tmp; - return stk_sensor_inb(dev, REG_COM2, &tmp) - || stk_sensor_outb(dev, REG_COM2, tmp&~COM2_SSLEEP); -} - -static struct regval ov_initvals[] = { - {REG_CLKRC, CLK_PLL}, - {REG_COM11, 0x01}, - {0x6a, 0x7d}, - {REG_AECH, 0x40}, - {REG_GAIN, 0x00}, - {REG_BLUE, 0x80}, - {REG_RED, 0x80}, - /* Do not enable fast AEC for now */ - /*{REG_COM8, COM8_FASTAEC|COM8_AECSTEP|COM8_BFILT|COM8_AGC|COM8_AEC},*/ - {REG_COM8, COM8_AECSTEP|COM8_BFILT|COM8_AGC|COM8_AEC}, - {0x39, 0x50}, {0x38, 0x93}, - {0x37, 0x00}, {0x35, 0x81}, - {REG_COM5, 0x20}, - {REG_COM1, 0x00}, - {REG_COM3, 0x00}, - {REG_COM4, 0x00}, - {REG_PSHFT, 0x00}, - {0x16, 0x07}, - {0x33, 0xe2}, {0x34, 0xbf}, - {REG_COM16, 0x00}, - {0x96, 0x04}, - /* Gamma curve values */ -/* { 0x7a, 0x20 }, { 0x7b, 0x10 }, - { 0x7c, 0x1e }, { 0x7d, 0x35 }, - { 0x7e, 0x5a }, { 0x7f, 0x69 }, - { 0x80, 0x76 }, { 0x81, 0x80 }, - { 0x82, 0x88 }, { 0x83, 0x8f }, - { 0x84, 0x96 }, { 0x85, 0xa3 }, - { 0x86, 0xaf }, { 0x87, 0xc4 }, - { 0x88, 0xd7 }, { 0x89, 0xe8 }, -*/ - {REG_GFIX, 0x40}, - {0x8e, 0x00}, - {REG_COM12, 0x73}, - {0x8f, 0xdf}, {0x8b, 0x06}, - {0x8c, 0x20}, - {0x94, 0x88}, {0x95, 0x88}, -/* {REG_COM15, 0xc1}, TODO */ - {0x29, 0x3f}, - {REG_COM6, 0x42}, - {REG_BD50MAX, 0x80}, - {REG_HAECC6, 0xb8}, {REG_HAECC7, 0x92}, - {REG_BD60MAX, 0x0a}, - {0x90, 0x00}, {0x91, 0x00}, - {REG_HAECC1, 0x00}, {REG_HAECC2, 0x00}, - {REG_AEW, 0x68}, {REG_AEB, 0x5c}, - {REG_VPT, 0xc3}, - {REG_COM9, 0x2e}, - {0x2a, 0x00}, {0x2b, 0x00}, - - {0xff, 0xff}, /* END MARKER */ -}; - -/* Probe the I2C bus and initialise the sensor chip */ -int stk_sensor_init(struct stk_camera *dev) -{ - u8 idl = 0; - u8 idh = 0; - - if (stk_camera_write_reg(dev, STK_IIC_ENABLE, STK_IIC_ENABLE_YES) - || stk_camera_write_reg(dev, STK_IIC_ADDR, SENSOR_ADDRESS) - || stk_sensor_outb(dev, REG_COM7, COM7_RESET)) { - pr_err("Sensor resetting failed\n"); - return -ENODEV; - } - msleep(10); - /* Read the manufacturer ID: ov = 0x7FA2 */ - if (stk_sensor_inb(dev, REG_MIDH, &idh) - || stk_sensor_inb(dev, REG_MIDL, &idl)) { - pr_err("Strange error reading sensor ID\n"); - return -ENODEV; - } - if (idh != 0x7f || idl != 0xa2) { - pr_err("Huh? you don't have a sensor from ovt\n"); - return -ENODEV; - } - if (stk_sensor_inb(dev, REG_PID, &idh) - || stk_sensor_inb(dev, REG_VER, &idl)) { - pr_err("Could not read sensor model\n"); - return -ENODEV; - } - stk_sensor_write_regvals(dev, ov_initvals); - msleep(10); - pr_info("OmniVision sensor detected, id %02X%02X at address %x\n", - idh, idl, SENSOR_ADDRESS); - return 0; -} - -/* V4L2_PIX_FMT_UYVY */ -static struct regval ov_fmt_uyvy[] = { - {REG_TSLB, TSLB_YLAST|0x08 }, - { 0x4f, 0x80 }, /* "matrix coefficient 1" */ - { 0x50, 0x80 }, /* "matrix coefficient 2" */ - { 0x51, 0 }, /* vb */ - { 0x52, 0x22 }, /* "matrix coefficient 4" */ - { 0x53, 0x5e }, /* "matrix coefficient 5" */ - { 0x54, 0x80 }, /* "matrix coefficient 6" */ - {REG_COM13, COM13_UVSAT|COM13_CMATRIX}, - {REG_COM15, COM15_R00FF }, - {0xff, 0xff}, /* END MARKER */ -}; -/* V4L2_PIX_FMT_YUYV */ -static struct regval ov_fmt_yuyv[] = { - {REG_TSLB, 0 }, - { 0x4f, 0x80 }, /* "matrix coefficient 1" */ - { 0x50, 0x80 }, /* "matrix coefficient 2" */ - { 0x51, 0 }, /* vb */ - { 0x52, 0x22 }, /* "matrix coefficient 4" */ - { 0x53, 0x5e }, /* "matrix coefficient 5" */ - { 0x54, 0x80 }, /* "matrix coefficient 6" */ - {REG_COM13, COM13_UVSAT|COM13_CMATRIX}, - {REG_COM15, COM15_R00FF }, - {0xff, 0xff}, /* END MARKER */ -}; - -/* V4L2_PIX_FMT_RGB565X rrrrrggg gggbbbbb */ -static struct regval ov_fmt_rgbr[] = { - { REG_RGB444, 0 }, /* No RGB444 please */ - {REG_TSLB, 0x00}, - { REG_COM1, 0x0 }, - { REG_COM9, 0x38 }, /* 16x gain ceiling; 0x8 is reserved bit */ - { 0x4f, 0xb3 }, /* "matrix coefficient 1" */ - { 0x50, 0xb3 }, /* "matrix coefficient 2" */ - { 0x51, 0 }, /* vb */ - { 0x52, 0x3d }, /* "matrix coefficient 4" */ - { 0x53, 0xa7 }, /* "matrix coefficient 5" */ - { 0x54, 0xe4 }, /* "matrix coefficient 6" */ - { REG_COM13, COM13_GAMMA }, - { REG_COM15, COM15_RGB565|COM15_R00FF }, - { 0xff, 0xff }, -}; - -/* V4L2_PIX_FMT_RGB565 gggbbbbb rrrrrggg */ -static struct regval ov_fmt_rgbp[] = { - { REG_RGB444, 0 }, /* No RGB444 please */ - {REG_TSLB, TSLB_BYTEORD }, - { REG_COM1, 0x0 }, - { REG_COM9, 0x38 }, /* 16x gain ceiling; 0x8 is reserved bit */ - { 0x4f, 0xb3 }, /* "matrix coefficient 1" */ - { 0x50, 0xb3 }, /* "matrix coefficient 2" */ - { 0x51, 0 }, /* vb */ - { 0x52, 0x3d }, /* "matrix coefficient 4" */ - { 0x53, 0xa7 }, /* "matrix coefficient 5" */ - { 0x54, 0xe4 }, /* "matrix coefficient 6" */ - { REG_COM13, COM13_GAMMA }, - { REG_COM15, COM15_RGB565|COM15_R00FF }, - { 0xff, 0xff }, -}; - -/* V4L2_PIX_FMT_SRGGB8 */ -static struct regval ov_fmt_bayer[] = { - /* This changes color order */ - {REG_TSLB, 0x40}, /* BGGR */ - /* {REG_TSLB, 0x08}, */ /* BGGR with vertical image flipping */ - {REG_COM15, COM15_R00FF }, - {0xff, 0xff}, /* END MARKER */ -}; -/* - * Store a set of start/stop values into the camera. - */ -static int stk_sensor_set_hw(struct stk_camera *dev, - int hstart, int hstop, int vstart, int vstop) -{ - int ret; - unsigned char v; -/* - * Horizontal: 11 bits, top 8 live in hstart and hstop. Bottom 3 of - * hstart are in href[2:0], bottom 3 of hstop in href[5:3]. There is - * a mystery "edge offset" value in the top two bits of href. - */ - ret = stk_sensor_outb(dev, REG_HSTART, (hstart >> 3) & 0xff); - ret += stk_sensor_outb(dev, REG_HSTOP, (hstop >> 3) & 0xff); - ret += stk_sensor_inb(dev, REG_HREF, &v); - v = (v & 0xc0) | ((hstop & 0x7) << 3) | (hstart & 0x7); - msleep(10); - ret += stk_sensor_outb(dev, REG_HREF, v); -/* - * Vertical: similar arrangement (note: this is different from ov7670.c) - */ - ret += stk_sensor_outb(dev, REG_VSTART, (vstart >> 3) & 0xff); - ret += stk_sensor_outb(dev, REG_VSTOP, (vstop >> 3) & 0xff); - ret += stk_sensor_inb(dev, REG_VREF, &v); - v = (v & 0xc0) | ((vstop & 0x7) << 3) | (vstart & 0x7); - msleep(10); - ret += stk_sensor_outb(dev, REG_VREF, v); - return ret; -} - - -int stk_sensor_configure(struct stk_camera *dev) -{ - int com7; - /* - * We setup the sensor to output dummy lines in low-res modes, - * so we don't get absurdly hight framerates. - */ - unsigned dummylines; - int flip; - struct regval *rv; - - switch (dev->vsettings.mode) { - case MODE_QCIF: com7 = COM7_FMT_QCIF; - dummylines = 604; - break; - case MODE_QVGA: com7 = COM7_FMT_QVGA; - dummylines = 267; - break; - case MODE_CIF: com7 = COM7_FMT_CIF; - dummylines = 412; - break; - case MODE_VGA: com7 = COM7_FMT_VGA; - dummylines = 11; - break; - case MODE_SXGA: com7 = COM7_FMT_SXGA; - dummylines = 0; - break; - default: - pr_err("Unsupported mode %d\n", dev->vsettings.mode); - return -EFAULT; - } - switch (dev->vsettings.palette) { - case V4L2_PIX_FMT_UYVY: - com7 |= COM7_YUV; - rv = ov_fmt_uyvy; - break; - case V4L2_PIX_FMT_YUYV: - com7 |= COM7_YUV; - rv = ov_fmt_yuyv; - break; - case V4L2_PIX_FMT_RGB565: - com7 |= COM7_RGB; - rv = ov_fmt_rgbp; - break; - case V4L2_PIX_FMT_RGB565X: - com7 |= COM7_RGB; - rv = ov_fmt_rgbr; - break; - case V4L2_PIX_FMT_SBGGR8: - com7 |= COM7_PBAYER; - rv = ov_fmt_bayer; - break; - default: - pr_err("Unsupported colorspace\n"); - return -EFAULT; - } - /*FIXME sometimes the sensor go to a bad state - stk_sensor_write_regvals(dev, ov_initvals); */ - stk_sensor_outb(dev, REG_COM7, com7); - msleep(50); - stk_sensor_write_regvals(dev, rv); - flip = (dev->vsettings.vflip?MVFP_FLIP:0) - | (dev->vsettings.hflip?MVFP_MIRROR:0); - stk_sensor_outb(dev, REG_MVFP, flip); - if (dev->vsettings.palette == V4L2_PIX_FMT_SBGGR8 - && !dev->vsettings.vflip) - stk_sensor_outb(dev, REG_TSLB, 0x08); - stk_sensor_outb(dev, REG_ADVFH, dummylines >> 8); - stk_sensor_outb(dev, REG_ADVFL, dummylines & 0xff); - msleep(50); - switch (dev->vsettings.mode) { - case MODE_VGA: - if (stk_sensor_set_hw(dev, 302, 1582, 6, 486)) - pr_err("stk_sensor_set_hw failed (VGA)\n"); - break; - case MODE_SXGA: - case MODE_CIF: - case MODE_QVGA: - case MODE_QCIF: - /*FIXME These settings seem ignored by the sensor - if (stk_sensor_set_hw(dev, 220, 1500, 10, 1034)) - pr_err("stk_sensor_set_hw failed (SXGA)\n"); - */ - break; - } - msleep(10); - return 0; -} - -int stk_sensor_set_brightness(struct stk_camera *dev, int br) -{ - if (br < 0 || br > 0xff) - return -EINVAL; - stk_sensor_outb(dev, REG_AEB, max(0x00, br - 6)); - stk_sensor_outb(dev, REG_AEW, min(0xff, br + 6)); - return 0; -} - diff --git a/drivers/staging/media/deprecated/stkwebcam/stk-webcam.c b/drivers/staging/media/deprecated/stkwebcam/stk-webcam.c deleted file mode 100644 index 787edb3d47c2..000000000000 --- a/drivers/staging/media/deprecated/stkwebcam/stk-webcam.c +++ /dev/null @@ -1,1434 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/* - * stk-webcam.c : Driver for Syntek 1125 USB webcam controller - * - * Copyright (C) 2006 Nicolas VIVIEN - * Copyright 2007-2008 Jaime Velasco Juan - * - * Some parts are inspired from cafe_ccic.c - * Copyright 2006-2007 Jonathan Corbet - */ - -#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt - -#include -#include -#include -#include -#include - -#include -#include -#include -#include -#include -#include -#include -#include - -#include "stk-webcam.h" - - -static int hflip = -1; -module_param(hflip, int, 0444); -MODULE_PARM_DESC(hflip, "Horizontal image flip (mirror). Defaults to 0"); - -static int vflip = -1; -module_param(vflip, int, 0444); -MODULE_PARM_DESC(vflip, "Vertical image flip. Defaults to 0"); - -static int debug; -module_param(debug, int, 0444); -MODULE_PARM_DESC(debug, "Debug v4l ioctls. Defaults to 0"); - -MODULE_LICENSE("GPL"); -MODULE_AUTHOR("Jaime Velasco Juan and Nicolas VIVIEN"); -MODULE_DESCRIPTION("Syntek DC1125 webcam driver"); - -/* Some cameras have audio interfaces, we aren't interested in those */ -static const struct usb_device_id stkwebcam_table[] = { - { USB_DEVICE_AND_INTERFACE_INFO(0x174f, 0xa311, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(0x05e1, 0x0501, 0xff, 0xff, 0xff) }, - { } -}; -MODULE_DEVICE_TABLE(usb, stkwebcam_table); - -/* - * The stk webcam laptop module is mounted upside down in some laptops :( - * - * Some background information (thanks to Hans de Goede for providing this): - * - * 1) Once upon a time the stkwebcam driver was written - * - * 2) The webcam in question was used mostly in Asus laptop models, including - * the laptop of the original author of the driver, and in these models, in - * typical Asus fashion (see the long long list for uvc cams inside v4l-utils), - * they mounted the webcam-module the wrong way up. So the hflip and vflip - * module options were given a default value of 1 (the correct value for - * upside down mounted models) - * - * 3) Years later I got a bug report from a user with a laptop with stkwebcam, - * where the module was actually mounted the right way up, and thus showed - * upside down under Linux. So now I was facing the choice of 2 options: - * - * a) Add a not-upside-down list to stkwebcam, which overrules the default. - * - * b) Do it like all the other drivers do, and make the default right for - * cams mounted the proper way and add an upside-down model list, with - * models where we need to flip-by-default. - * - * Despite knowing that going b) would cause a period of pain where we were - * building the table I opted to go for option b), since a) is just too ugly, - * and worse different from how every other driver does it leading to - * confusion in the long run. This change was made in kernel 3.6. - * - * So for any user report about upside-down images since kernel 3.6 ask them - * to provide the output of 'sudo dmidecode' so the laptop can be added in - * the table below. - */ -static const struct dmi_system_id stk_upside_down_dmi_table[] = { - { - .ident = "ASUS G1", - .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK Computer Inc."), - DMI_MATCH(DMI_PRODUCT_NAME, "G1") - } - }, { - .ident = "ASUS F3JC", - .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK Computer Inc."), - DMI_MATCH(DMI_PRODUCT_NAME, "F3JC") - } - }, - { - .ident = "T12Rg-H", - .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "HCL Infosystems Limited"), - DMI_MATCH(DMI_PRODUCT_NAME, "T12Rg-H") - } - }, - { - .ident = "ASUS A6VM", - .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK Computer Inc."), - DMI_MATCH(DMI_PRODUCT_NAME, "A6VM") - } - }, - { - .ident = "ASUS A6JC", - .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK Computer Inc."), - DMI_MATCH(DMI_PRODUCT_NAME, "A6JC") - } - }, - {} -}; - - -/* - * Basic stuff - */ -int stk_camera_write_reg(struct stk_camera *dev, u16 index, u8 value) -{ - struct usb_device *udev = dev->udev; - int ret; - - ret = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), - 0x01, - USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE, - value, - index, - NULL, - 0, - 500); - if (ret < 0) - return ret; - else - return 0; -} - -int stk_camera_read_reg(struct stk_camera *dev, u16 index, u8 *value) -{ - struct usb_device *udev = dev->udev; - int ret; - - ret = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0), - 0x00, - USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE, - 0x00, - index, - &dev->read_reg_scratch, - sizeof(u8), - 500); - if (ret >= 0) - *value = dev->read_reg_scratch; - - if (ret < 0) - return ret; - else - return 0; -} - -static int stk_start_stream(struct stk_camera *dev) -{ - u8 value; - int i, ret; - u8 value_116, value_117; - - - if (!is_present(dev)) - return -ENODEV; - if (!is_memallocd(dev) || !is_initialised(dev)) { - pr_err("FIXME: Buffers are not allocated\n"); - return -EFAULT; - } - ret = usb_set_interface(dev->udev, 0, 5); - - if (ret < 0) - pr_err("usb_set_interface failed !\n"); - if (stk_sensor_wakeup(dev)) - pr_err("error awaking the sensor\n"); - - stk_camera_read_reg(dev, 0x0116, &value_116); - stk_camera_read_reg(dev, 0x0117, &value_117); - - stk_camera_write_reg(dev, 0x0116, 0x0000); - stk_camera_write_reg(dev, 0x0117, 0x0000); - - stk_camera_read_reg(dev, 0x0100, &value); - stk_camera_write_reg(dev, 0x0100, value | 0x80); - - stk_camera_write_reg(dev, 0x0116, value_116); - stk_camera_write_reg(dev, 0x0117, value_117); - for (i = 0; i < MAX_ISO_BUFS; i++) { - if (dev->isobufs[i].urb) { - ret = usb_submit_urb(dev->isobufs[i].urb, GFP_KERNEL); - atomic_inc(&dev->urbs_used); - if (ret) - return ret; - } - } - set_streaming(dev); - return 0; -} - -static int stk_stop_stream(struct stk_camera *dev) -{ - u8 value; - int i; - if (is_present(dev)) { - stk_camera_read_reg(dev, 0x0100, &value); - stk_camera_write_reg(dev, 0x0100, value & ~0x80); - if (dev->isobufs != NULL) { - for (i = 0; i < MAX_ISO_BUFS; i++) { - if (dev->isobufs[i].urb) - usb_kill_urb(dev->isobufs[i].urb); - } - } - unset_streaming(dev); - - if (usb_set_interface(dev->udev, 0, 0)) - pr_err("usb_set_interface failed !\n"); - if (stk_sensor_sleep(dev)) - pr_err("error suspending the sensor\n"); - } - return 0; -} - -/* - * This seems to be the shortest init sequence we - * must do in order to find the sensor - * Bit 5 of reg. 0x0000 here is important, when reset to 0 the sensor - * is also reset. Maybe powers down it? - * Rest of values don't make a difference - */ - -static struct regval stk1125_initvals[] = { - /*TODO: What means this sequence? */ - {0x0000, 0x24}, - {0x0100, 0x21}, - {0x0002, 0x68}, - {0x0003, 0x80}, - {0x0005, 0x00}, - {0x0007, 0x03}, - {0x000d, 0x00}, - {0x000f, 0x02}, - {0x0300, 0x12}, - {0x0350, 0x41}, - {0x0351, 0x00}, - {0x0352, 0x00}, - {0x0353, 0x00}, - {0x0018, 0x10}, - {0x0019, 0x00}, - {0x001b, 0x0e}, - {0x001c, 0x46}, - {0x0300, 0x80}, - {0x001a, 0x04}, - {0x0110, 0x00}, - {0x0111, 0x00}, - {0x0112, 0x00}, - {0x0113, 0x00}, - - {0xffff, 0xff}, -}; - - -static int stk_initialise(struct stk_camera *dev) -{ - struct regval *rv; - int ret; - if (!is_present(dev)) - return -ENODEV; - if (is_initialised(dev)) - return 0; - rv = stk1125_initvals; - while (rv->reg != 0xffff) { - ret = stk_camera_write_reg(dev, rv->reg, rv->val); - if (ret) - return ret; - rv++; - } - if (stk_sensor_init(dev) == 0) { - set_initialised(dev); - return 0; - } else - return -1; -} - -/* *********************************************** */ -/* - * This function is called as an URB transfert is complete (Isochronous pipe). - * So, the traitement is done in interrupt time, so it has be fast, not crash, - * and not stall. Neat. - */ -static void stk_isoc_handler(struct urb *urb) -{ - int i; - int ret; - int framelen; - unsigned long flags; - - unsigned char *fill = NULL; - unsigned char *iso_buf = NULL; - - struct stk_camera *dev; - struct stk_sio_buffer *fb; - - dev = (struct stk_camera *) urb->context; - - if (dev == NULL) { - pr_err("isoc_handler called with NULL device !\n"); - return; - } - - if (urb->status == -ENOENT || urb->status == -ECONNRESET - || urb->status == -ESHUTDOWN) { - atomic_dec(&dev->urbs_used); - return; - } - - spin_lock_irqsave(&dev->spinlock, flags); - - if (urb->status != -EINPROGRESS && urb->status != 0) { - pr_err("isoc_handler: urb->status == %d\n", urb->status); - goto resubmit; - } - - if (list_empty(&dev->sio_avail)) { - /*FIXME Stop streaming after a while */ - pr_err_ratelimited("isoc_handler without available buffer!\n"); - goto resubmit; - } - fb = list_first_entry(&dev->sio_avail, - struct stk_sio_buffer, list); - fill = fb->buffer + fb->v4lbuf.bytesused; - - for (i = 0; i < urb->number_of_packets; i++) { - if (urb->iso_frame_desc[i].status != 0) { - if (urb->iso_frame_desc[i].status != -EXDEV) - pr_err("Frame %d has error %d\n", - i, urb->iso_frame_desc[i].status); - continue; - } - framelen = urb->iso_frame_desc[i].actual_length; - iso_buf = urb->transfer_buffer + urb->iso_frame_desc[i].offset; - - if (framelen <= 4) - continue; /* no data */ - - /* - * we found something informational from there - * the isoc frames have to type of headers - * type1: 00 xx 00 00 or 20 xx 00 00 - * type2: 80 xx 00 00 00 00 00 00 or a0 xx 00 00 00 00 00 00 - * xx is a sequencer which has never been seen over 0x3f - * imho data written down looks like bayer, i see similarities - * after every 640 bytes - */ - if (*iso_buf & 0x80) { - framelen -= 8; - iso_buf += 8; - /* This marks a new frame */ - if (fb->v4lbuf.bytesused != 0 - && fb->v4lbuf.bytesused != dev->frame_size) { - pr_err_ratelimited("frame %d, bytesused=%d, skipping\n", - i, fb->v4lbuf.bytesused); - fb->v4lbuf.bytesused = 0; - fill = fb->buffer; - } else if (fb->v4lbuf.bytesused == dev->frame_size) { - if (list_is_singular(&dev->sio_avail)) { - /* Always reuse the last buffer */ - fb->v4lbuf.bytesused = 0; - fill = fb->buffer; - } else { - list_move_tail(dev->sio_avail.next, - &dev->sio_full); - wake_up(&dev->wait_frame); - fb = list_first_entry(&dev->sio_avail, - struct stk_sio_buffer, list); - fb->v4lbuf.bytesused = 0; - fill = fb->buffer; - } - } - } else { - framelen -= 4; - iso_buf += 4; - } - - /* Our buffer is full !!! */ - if (framelen + fb->v4lbuf.bytesused > dev->frame_size) { - pr_err_ratelimited("Frame buffer overflow, lost sync\n"); - /*FIXME Do something here? */ - continue; - } - spin_unlock_irqrestore(&dev->spinlock, flags); - memcpy(fill, iso_buf, framelen); - spin_lock_irqsave(&dev->spinlock, flags); - fill += framelen; - - /* New size of our buffer */ - fb->v4lbuf.bytesused += framelen; - } - -resubmit: - spin_unlock_irqrestore(&dev->spinlock, flags); - urb->dev = dev->udev; - ret = usb_submit_urb(urb, GFP_ATOMIC); - if (ret != 0) { - pr_err("Error (%d) re-submitting urb in stk_isoc_handler\n", - ret); - } -} - -/* -------------------------------------------- */ - -static int stk_prepare_iso(struct stk_camera *dev) -{ - void *kbuf; - int i, j; - struct urb *urb; - struct usb_device *udev; - - if (dev == NULL) - return -ENXIO; - udev = dev->udev; - - if (dev->isobufs) - pr_err("isobufs already allocated. Bad\n"); - else - dev->isobufs = kcalloc(MAX_ISO_BUFS, sizeof(*dev->isobufs), - GFP_KERNEL); - if (dev->isobufs == NULL) { - pr_err("Unable to allocate iso buffers\n"); - return -ENOMEM; - } - for (i = 0; i < MAX_ISO_BUFS; i++) { - if (dev->isobufs[i].data == NULL) { - kbuf = kzalloc(ISO_BUFFER_SIZE, GFP_KERNEL); - if (kbuf == NULL) { - pr_err("Failed to allocate iso buffer %d\n", i); - goto isobufs_out; - } - dev->isobufs[i].data = kbuf; - } else - pr_err("isobuf data already allocated\n"); - if (dev->isobufs[i].urb == NULL) { - urb = usb_alloc_urb(ISO_FRAMES_PER_DESC, GFP_KERNEL); - if (urb == NULL) - goto isobufs_out; - dev->isobufs[i].urb = urb; - } else { - pr_err("Killing URB\n"); - usb_kill_urb(dev->isobufs[i].urb); - urb = dev->isobufs[i].urb; - } - urb->interval = 1; - urb->dev = udev; - urb->pipe = usb_rcvisocpipe(udev, dev->isoc_ep); - urb->transfer_flags = URB_ISO_ASAP; - urb->transfer_buffer = dev->isobufs[i].data; - urb->transfer_buffer_length = ISO_BUFFER_SIZE; - urb->complete = stk_isoc_handler; - urb->context = dev; - urb->start_frame = 0; - urb->number_of_packets = ISO_FRAMES_PER_DESC; - - for (j = 0; j < ISO_FRAMES_PER_DESC; j++) { - urb->iso_frame_desc[j].offset = j * ISO_MAX_FRAME_SIZE; - urb->iso_frame_desc[j].length = ISO_MAX_FRAME_SIZE; - } - } - set_memallocd(dev); - return 0; - -isobufs_out: - for (i = 0; i < MAX_ISO_BUFS && dev->isobufs[i].data; i++) - kfree(dev->isobufs[i].data); - for (i = 0; i < MAX_ISO_BUFS && dev->isobufs[i].urb; i++) - usb_free_urb(dev->isobufs[i].urb); - kfree(dev->isobufs); - dev->isobufs = NULL; - return -ENOMEM; -} - -static void stk_clean_iso(struct stk_camera *dev) -{ - int i; - - if (dev == NULL || dev->isobufs == NULL) - return; - - for (i = 0; i < MAX_ISO_BUFS; i++) { - struct urb *urb; - - urb = dev->isobufs[i].urb; - if (urb) { - if (atomic_read(&dev->urbs_used) && is_present(dev)) - usb_kill_urb(urb); - usb_free_urb(urb); - } - kfree(dev->isobufs[i].data); - } - kfree(dev->isobufs); - dev->isobufs = NULL; - unset_memallocd(dev); -} - -static int stk_setup_siobuf(struct stk_camera *dev, int index) -{ - struct stk_sio_buffer *buf = dev->sio_bufs + index; - INIT_LIST_HEAD(&buf->list); - buf->v4lbuf.length = PAGE_ALIGN(dev->frame_size); - buf->buffer = vmalloc_user(buf->v4lbuf.length); - if (buf->buffer == NULL) - return -ENOMEM; - buf->mapcount = 0; - buf->dev = dev; - buf->v4lbuf.index = index; - buf->v4lbuf.type = V4L2_BUF_TYPE_VIDEO_CAPTURE; - buf->v4lbuf.flags = V4L2_BUF_FLAG_TIMESTAMP_MONOTONIC; - buf->v4lbuf.field = V4L2_FIELD_NONE; - buf->v4lbuf.memory = V4L2_MEMORY_MMAP; - buf->v4lbuf.m.offset = 2*index*buf->v4lbuf.length; - return 0; -} - -static int stk_free_sio_buffers(struct stk_camera *dev) -{ - int i; - int nbufs; - unsigned long flags; - if (dev->n_sbufs == 0 || dev->sio_bufs == NULL) - return 0; - /* - * If any buffers are mapped, we cannot free them at all. - */ - for (i = 0; i < dev->n_sbufs; i++) { - if (dev->sio_bufs[i].mapcount > 0) - return -EBUSY; - } - /* - * OK, let's do it. - */ - spin_lock_irqsave(&dev->spinlock, flags); - INIT_LIST_HEAD(&dev->sio_avail); - INIT_LIST_HEAD(&dev->sio_full); - nbufs = dev->n_sbufs; - dev->n_sbufs = 0; - spin_unlock_irqrestore(&dev->spinlock, flags); - for (i = 0; i < nbufs; i++) - vfree(dev->sio_bufs[i].buffer); - kfree(dev->sio_bufs); - dev->sio_bufs = NULL; - return 0; -} - -static int stk_prepare_sio_buffers(struct stk_camera *dev, unsigned n_sbufs) -{ - int i; - if (dev->sio_bufs != NULL) - pr_err("sio_bufs already allocated\n"); - else { - dev->sio_bufs = kcalloc(n_sbufs, - sizeof(struct stk_sio_buffer), - GFP_KERNEL); - if (dev->sio_bufs == NULL) - return -ENOMEM; - for (i = 0; i < n_sbufs; i++) { - if (stk_setup_siobuf(dev, i)) - return (dev->n_sbufs > 1 ? 0 : -ENOMEM); - dev->n_sbufs = i+1; - } - } - return 0; -} - -static int stk_allocate_buffers(struct stk_camera *dev, unsigned n_sbufs) -{ - int err; - err = stk_prepare_iso(dev); - if (err) { - stk_clean_iso(dev); - return err; - } - err = stk_prepare_sio_buffers(dev, n_sbufs); - if (err) { - stk_free_sio_buffers(dev); - return err; - } - return 0; -} - -static void stk_free_buffers(struct stk_camera *dev) -{ - stk_clean_iso(dev); - stk_free_sio_buffers(dev); -} -/* -------------------------------------------- */ - -/* v4l file operations */ - -static int v4l_stk_open(struct file *fp) -{ - struct stk_camera *dev = video_drvdata(fp); - int err; - - if (dev == NULL || !is_present(dev)) - return -ENXIO; - - if (mutex_lock_interruptible(&dev->lock)) - return -ERESTARTSYS; - if (!dev->first_init) - stk_camera_write_reg(dev, 0x0, 0x24); - else - dev->first_init = 0; - - err = v4l2_fh_open(fp); - if (!err) - usb_autopm_get_interface(dev->interface); - mutex_unlock(&dev->lock); - return err; -} - -static int v4l_stk_release(struct file *fp) -{ - struct stk_camera *dev = video_drvdata(fp); - - mutex_lock(&dev->lock); - if (dev->owner == fp) { - stk_stop_stream(dev); - stk_free_buffers(dev); - stk_camera_write_reg(dev, 0x0, 0x49); /* turn off the LED */ - unset_initialised(dev); - dev->owner = NULL; - } - - usb_autopm_put_interface(dev->interface); - mutex_unlock(&dev->lock); - return v4l2_fh_release(fp); -} - -static ssize_t stk_read(struct file *fp, char __user *buf, - size_t count, loff_t *f_pos) -{ - int i; - int ret; - unsigned long flags; - struct stk_sio_buffer *sbuf; - struct stk_camera *dev = video_drvdata(fp); - - if (!is_present(dev)) - return -EIO; - if (dev->owner && (!dev->reading || dev->owner != fp)) - return -EBUSY; - dev->owner = fp; - if (!is_streaming(dev)) { - if (stk_initialise(dev) - || stk_allocate_buffers(dev, 3) - || stk_start_stream(dev)) - return -ENOMEM; - dev->reading = 1; - spin_lock_irqsave(&dev->spinlock, flags); - for (i = 0; i < dev->n_sbufs; i++) { - list_add_tail(&dev->sio_bufs[i].list, &dev->sio_avail); - dev->sio_bufs[i].v4lbuf.flags = V4L2_BUF_FLAG_QUEUED; - } - spin_unlock_irqrestore(&dev->spinlock, flags); - } - if (*f_pos == 0) { - if (fp->f_flags & O_NONBLOCK && list_empty(&dev->sio_full)) - return -EWOULDBLOCK; - ret = wait_event_interruptible(dev->wait_frame, - !list_empty(&dev->sio_full) || !is_present(dev)); - if (ret) - return ret; - if (!is_present(dev)) - return -EIO; - } - if (count + *f_pos > dev->frame_size) - count = dev->frame_size - *f_pos; - spin_lock_irqsave(&dev->spinlock, flags); - if (list_empty(&dev->sio_full)) { - spin_unlock_irqrestore(&dev->spinlock, flags); - pr_err("BUG: No siobufs ready\n"); - return 0; - } - sbuf = list_first_entry(&dev->sio_full, struct stk_sio_buffer, list); - spin_unlock_irqrestore(&dev->spinlock, flags); - - if (copy_to_user(buf, sbuf->buffer + *f_pos, count)) - return -EFAULT; - - *f_pos += count; - - if (*f_pos >= dev->frame_size) { - *f_pos = 0; - spin_lock_irqsave(&dev->spinlock, flags); - list_move_tail(&sbuf->list, &dev->sio_avail); - spin_unlock_irqrestore(&dev->spinlock, flags); - } - return count; -} - -static ssize_t v4l_stk_read(struct file *fp, char __user *buf, - size_t count, loff_t *f_pos) -{ - struct stk_camera *dev = video_drvdata(fp); - int ret; - - if (mutex_lock_interruptible(&dev->lock)) - return -ERESTARTSYS; - ret = stk_read(fp, buf, count, f_pos); - mutex_unlock(&dev->lock); - return ret; -} - -static __poll_t v4l_stk_poll(struct file *fp, poll_table *wait) -{ - struct stk_camera *dev = video_drvdata(fp); - __poll_t res = v4l2_ctrl_poll(fp, wait); - - poll_wait(fp, &dev->wait_frame, wait); - - if (!is_present(dev)) - return EPOLLERR; - - if (!list_empty(&dev->sio_full)) - return res | EPOLLIN | EPOLLRDNORM; - - return res; -} - - -static void stk_v4l_vm_open(struct vm_area_struct *vma) -{ - struct stk_sio_buffer *sbuf = vma->vm_private_data; - sbuf->mapcount++; -} -static void stk_v4l_vm_close(struct vm_area_struct *vma) -{ - struct stk_sio_buffer *sbuf = vma->vm_private_data; - sbuf->mapcount--; - if (sbuf->mapcount == 0) - sbuf->v4lbuf.flags &= ~V4L2_BUF_FLAG_MAPPED; -} -static const struct vm_operations_struct stk_v4l_vm_ops = { - .open = stk_v4l_vm_open, - .close = stk_v4l_vm_close -}; - -static int v4l_stk_mmap(struct file *fp, struct vm_area_struct *vma) -{ - unsigned int i; - int ret; - unsigned long offset = vma->vm_pgoff << PAGE_SHIFT; - struct stk_camera *dev = video_drvdata(fp); - struct stk_sio_buffer *sbuf = NULL; - - if (!(vma->vm_flags & VM_WRITE) || !(vma->vm_flags & VM_SHARED)) - return -EINVAL; - - for (i = 0; i < dev->n_sbufs; i++) { - if (dev->sio_bufs[i].v4lbuf.m.offset == offset) { - sbuf = dev->sio_bufs + i; - break; - } - } - if (sbuf == NULL) - return -EINVAL; - ret = remap_vmalloc_range(vma, sbuf->buffer, 0); - if (ret) - return ret; - vma->vm_flags |= VM_DONTEXPAND; - vma->vm_private_data = sbuf; - vma->vm_ops = &stk_v4l_vm_ops; - sbuf->v4lbuf.flags |= V4L2_BUF_FLAG_MAPPED; - stk_v4l_vm_open(vma); - return 0; -} - -/* v4l ioctl handlers */ - -static int stk_vidioc_querycap(struct file *filp, - void *priv, struct v4l2_capability *cap) -{ - struct stk_camera *dev = video_drvdata(filp); - - strscpy(cap->driver, "stk", sizeof(cap->driver)); - strscpy(cap->card, "stk", sizeof(cap->card)); - usb_make_path(dev->udev, cap->bus_info, sizeof(cap->bus_info)); - return 0; -} - -static int stk_vidioc_enum_input(struct file *filp, - void *priv, struct v4l2_input *input) -{ - if (input->index != 0) - return -EINVAL; - - strscpy(input->name, "Syntek USB Camera", sizeof(input->name)); - input->type = V4L2_INPUT_TYPE_CAMERA; - return 0; -} - - -static int stk_vidioc_g_input(struct file *filp, void *priv, unsigned int *i) -{ - *i = 0; - return 0; -} - -static int stk_vidioc_s_input(struct file *filp, void *priv, unsigned int i) -{ - return i ? -EINVAL : 0; -} - -static int stk_s_ctrl(struct v4l2_ctrl *ctrl) -{ - struct stk_camera *dev = - container_of(ctrl->handler, struct stk_camera, hdl); - - switch (ctrl->id) { - case V4L2_CID_BRIGHTNESS: - return stk_sensor_set_brightness(dev, ctrl->val); - case V4L2_CID_HFLIP: - if (dmi_check_system(stk_upside_down_dmi_table)) - dev->vsettings.hflip = !ctrl->val; - else - dev->vsettings.hflip = ctrl->val; - return 0; - case V4L2_CID_VFLIP: - if (dmi_check_system(stk_upside_down_dmi_table)) - dev->vsettings.vflip = !ctrl->val; - else - dev->vsettings.vflip = ctrl->val; - return 0; - default: - return -EINVAL; - } - return 0; -} - - -static int stk_vidioc_enum_fmt_vid_cap(struct file *filp, - void *priv, struct v4l2_fmtdesc *fmtd) -{ - switch (fmtd->index) { - case 0: - fmtd->pixelformat = V4L2_PIX_FMT_RGB565; - break; - case 1: - fmtd->pixelformat = V4L2_PIX_FMT_RGB565X; - break; - case 2: - fmtd->pixelformat = V4L2_PIX_FMT_UYVY; - break; - case 3: - fmtd->pixelformat = V4L2_PIX_FMT_SBGGR8; - break; - case 4: - fmtd->pixelformat = V4L2_PIX_FMT_YUYV; - break; - default: - return -EINVAL; - } - return 0; -} - -static struct stk_size { - unsigned w; - unsigned h; - enum stk_mode m; -} stk_sizes[] = { - { .w = 1280, .h = 1024, .m = MODE_SXGA, }, - { .w = 640, .h = 480, .m = MODE_VGA, }, - { .w = 352, .h = 288, .m = MODE_CIF, }, - { .w = 320, .h = 240, .m = MODE_QVGA, }, - { .w = 176, .h = 144, .m = MODE_QCIF, }, -}; - -static int stk_vidioc_g_fmt_vid_cap(struct file *filp, - void *priv, struct v4l2_format *f) -{ - struct v4l2_pix_format *pix_format = &f->fmt.pix; - struct stk_camera *dev = video_drvdata(filp); - int i; - - for (i = 0; i < ARRAY_SIZE(stk_sizes) && - stk_sizes[i].m != dev->vsettings.mode; i++) - ; - if (i == ARRAY_SIZE(stk_sizes)) { - pr_err("ERROR: mode invalid\n"); - return -EINVAL; - } - pix_format->width = stk_sizes[i].w; - pix_format->height = stk_sizes[i].h; - pix_format->field = V4L2_FIELD_NONE; - pix_format->colorspace = V4L2_COLORSPACE_SRGB; - pix_format->pixelformat = dev->vsettings.palette; - if (dev->vsettings.palette == V4L2_PIX_FMT_SBGGR8) - pix_format->bytesperline = pix_format->width; - else - pix_format->bytesperline = 2 * pix_format->width; - pix_format->sizeimage = pix_format->bytesperline - * pix_format->height; - return 0; -} - -static int stk_try_fmt_vid_cap(struct file *filp, - struct v4l2_format *fmtd, int *idx) -{ - int i; - switch (fmtd->fmt.pix.pixelformat) { - case V4L2_PIX_FMT_RGB565: - case V4L2_PIX_FMT_RGB565X: - case V4L2_PIX_FMT_UYVY: - case V4L2_PIX_FMT_YUYV: - case V4L2_PIX_FMT_SBGGR8: - break; - default: - return -EINVAL; - } - for (i = 1; i < ARRAY_SIZE(stk_sizes); i++) { - if (fmtd->fmt.pix.width > stk_sizes[i].w) - break; - } - if (i == ARRAY_SIZE(stk_sizes) - || (abs(fmtd->fmt.pix.width - stk_sizes[i-1].w) - < abs(fmtd->fmt.pix.width - stk_sizes[i].w))) { - fmtd->fmt.pix.height = stk_sizes[i-1].h; - fmtd->fmt.pix.width = stk_sizes[i-1].w; - if (idx) - *idx = i - 1; - } else { - fmtd->fmt.pix.height = stk_sizes[i].h; - fmtd->fmt.pix.width = stk_sizes[i].w; - if (idx) - *idx = i; - } - - fmtd->fmt.pix.field = V4L2_FIELD_NONE; - fmtd->fmt.pix.colorspace = V4L2_COLORSPACE_SRGB; - if (fmtd->fmt.pix.pixelformat == V4L2_PIX_FMT_SBGGR8) - fmtd->fmt.pix.bytesperline = fmtd->fmt.pix.width; - else - fmtd->fmt.pix.bytesperline = 2 * fmtd->fmt.pix.width; - fmtd->fmt.pix.sizeimage = fmtd->fmt.pix.bytesperline - * fmtd->fmt.pix.height; - return 0; -} - -static int stk_vidioc_try_fmt_vid_cap(struct file *filp, - void *priv, struct v4l2_format *fmtd) -{ - return stk_try_fmt_vid_cap(filp, fmtd, NULL); -} - -static int stk_setup_format(struct stk_camera *dev) -{ - int i = 0; - int depth; - if (dev->vsettings.palette == V4L2_PIX_FMT_SBGGR8) - depth = 1; - else - depth = 2; - while (i < ARRAY_SIZE(stk_sizes) && - stk_sizes[i].m != dev->vsettings.mode) - i++; - if (i == ARRAY_SIZE(stk_sizes)) { - pr_err("Something is broken in %s\n", __func__); - return -EFAULT; - } - /* This registers controls some timings, not sure of what. */ - stk_camera_write_reg(dev, 0x001b, 0x0e); - if (dev->vsettings.mode == MODE_SXGA) - stk_camera_write_reg(dev, 0x001c, 0x0e); - else - stk_camera_write_reg(dev, 0x001c, 0x46); - /* - * Registers 0x0115 0x0114 are the size of each line (bytes), - * regs 0x0117 0x0116 are the height of the image. - */ - stk_camera_write_reg(dev, 0x0115, - ((stk_sizes[i].w * depth) >> 8) & 0xff); - stk_camera_write_reg(dev, 0x0114, - (stk_sizes[i].w * depth) & 0xff); - stk_camera_write_reg(dev, 0x0117, - (stk_sizes[i].h >> 8) & 0xff); - stk_camera_write_reg(dev, 0x0116, - stk_sizes[i].h & 0xff); - return stk_sensor_configure(dev); -} - -static int stk_vidioc_s_fmt_vid_cap(struct file *filp, - void *priv, struct v4l2_format *fmtd) -{ - int ret; - int idx; - struct stk_camera *dev = video_drvdata(filp); - - if (dev == NULL) - return -ENODEV; - if (!is_present(dev)) - return -ENODEV; - if (is_streaming(dev)) - return -EBUSY; - if (dev->owner) - return -EBUSY; - ret = stk_try_fmt_vid_cap(filp, fmtd, &idx); - if (ret) - return ret; - - dev->vsettings.palette = fmtd->fmt.pix.pixelformat; - stk_free_buffers(dev); - dev->frame_size = fmtd->fmt.pix.sizeimage; - dev->vsettings.mode = stk_sizes[idx].m; - - stk_initialise(dev); - return stk_setup_format(dev); -} - -static int stk_vidioc_reqbufs(struct file *filp, - void *priv, struct v4l2_requestbuffers *rb) -{ - struct stk_camera *dev = video_drvdata(filp); - - if (dev == NULL) - return -ENODEV; - if (rb->memory != V4L2_MEMORY_MMAP) - return -EINVAL; - if (is_streaming(dev) - || (dev->owner && dev->owner != filp)) - return -EBUSY; - stk_free_buffers(dev); - if (rb->count == 0) { - stk_camera_write_reg(dev, 0x0, 0x49); /* turn off the LED */ - unset_initialised(dev); - dev->owner = NULL; - return 0; - } - dev->owner = filp; - - /*FIXME If they ask for zero, we must stop streaming and free */ - if (rb->count < 3) - rb->count = 3; - /* Arbitrary limit */ - else if (rb->count > 5) - rb->count = 5; - - stk_allocate_buffers(dev, rb->count); - rb->count = dev->n_sbufs; - return 0; -} - -static int stk_vidioc_querybuf(struct file *filp, - void *priv, struct v4l2_buffer *buf) -{ - struct stk_camera *dev = video_drvdata(filp); - struct stk_sio_buffer *sbuf; - - if (buf->index >= dev->n_sbufs) - return -EINVAL; - sbuf = dev->sio_bufs + buf->index; - *buf = sbuf->v4lbuf; - return 0; -} - -static int stk_vidioc_qbuf(struct file *filp, - void *priv, struct v4l2_buffer *buf) -{ - struct stk_camera *dev = video_drvdata(filp); - struct stk_sio_buffer *sbuf; - unsigned long flags; - - if (buf->memory != V4L2_MEMORY_MMAP) - return -EINVAL; - - if (buf->index >= dev->n_sbufs) - return -EINVAL; - sbuf = dev->sio_bufs + buf->index; - if (sbuf->v4lbuf.flags & V4L2_BUF_FLAG_QUEUED) - return 0; - sbuf->v4lbuf.flags |= V4L2_BUF_FLAG_QUEUED; - sbuf->v4lbuf.flags &= ~V4L2_BUF_FLAG_DONE; - spin_lock_irqsave(&dev->spinlock, flags); - list_add_tail(&sbuf->list, &dev->sio_avail); - *buf = sbuf->v4lbuf; - spin_unlock_irqrestore(&dev->spinlock, flags); - return 0; -} - -static int stk_vidioc_dqbuf(struct file *filp, - void *priv, struct v4l2_buffer *buf) -{ - struct stk_camera *dev = video_drvdata(filp); - struct stk_sio_buffer *sbuf; - unsigned long flags; - int ret; - - if (!is_streaming(dev)) - return -EINVAL; - - if (filp->f_flags & O_NONBLOCK && list_empty(&dev->sio_full)) - return -EWOULDBLOCK; - ret = wait_event_interruptible(dev->wait_frame, - !list_empty(&dev->sio_full) || !is_present(dev)); - if (ret) - return ret; - if (!is_present(dev)) - return -EIO; - - spin_lock_irqsave(&dev->spinlock, flags); - sbuf = list_first_entry(&dev->sio_full, struct stk_sio_buffer, list); - list_del_init(&sbuf->list); - spin_unlock_irqrestore(&dev->spinlock, flags); - sbuf->v4lbuf.flags &= ~V4L2_BUF_FLAG_QUEUED; - sbuf->v4lbuf.flags |= V4L2_BUF_FLAG_DONE; - sbuf->v4lbuf.sequence = ++dev->sequence; - v4l2_buffer_set_timestamp(&sbuf->v4lbuf, ktime_get_ns()); - - *buf = sbuf->v4lbuf; - return 0; -} - -static int stk_vidioc_streamon(struct file *filp, - void *priv, enum v4l2_buf_type type) -{ - struct stk_camera *dev = video_drvdata(filp); - if (is_streaming(dev)) - return 0; - if (dev->sio_bufs == NULL) - return -EINVAL; - dev->sequence = 0; - return stk_start_stream(dev); -} - -static int stk_vidioc_streamoff(struct file *filp, - void *priv, enum v4l2_buf_type type) -{ - struct stk_camera *dev = video_drvdata(filp); - unsigned long flags; - int i; - stk_stop_stream(dev); - spin_lock_irqsave(&dev->spinlock, flags); - INIT_LIST_HEAD(&dev->sio_avail); - INIT_LIST_HEAD(&dev->sio_full); - for (i = 0; i < dev->n_sbufs; i++) { - INIT_LIST_HEAD(&dev->sio_bufs[i].list); - dev->sio_bufs[i].v4lbuf.flags = 0; - } - spin_unlock_irqrestore(&dev->spinlock, flags); - return 0; -} - - -static int stk_vidioc_g_parm(struct file *filp, - void *priv, struct v4l2_streamparm *sp) -{ - /*FIXME This is not correct */ - sp->parm.capture.timeperframe.numerator = 1; - sp->parm.capture.timeperframe.denominator = 30; - sp->parm.capture.readbuffers = 2; - return 0; -} - -static int stk_vidioc_enum_framesizes(struct file *filp, - void *priv, struct v4l2_frmsizeenum *frms) -{ - if (frms->index >= ARRAY_SIZE(stk_sizes)) - return -EINVAL; - switch (frms->pixel_format) { - case V4L2_PIX_FMT_RGB565: - case V4L2_PIX_FMT_RGB565X: - case V4L2_PIX_FMT_UYVY: - case V4L2_PIX_FMT_YUYV: - case V4L2_PIX_FMT_SBGGR8: - frms->type = V4L2_FRMSIZE_TYPE_DISCRETE; - frms->discrete.width = stk_sizes[frms->index].w; - frms->discrete.height = stk_sizes[frms->index].h; - return 0; - default: return -EINVAL; - } -} - -static const struct v4l2_ctrl_ops stk_ctrl_ops = { - .s_ctrl = stk_s_ctrl, -}; - -static const struct v4l2_file_operations v4l_stk_fops = { - .owner = THIS_MODULE, - .open = v4l_stk_open, - .release = v4l_stk_release, - .read = v4l_stk_read, - .poll = v4l_stk_poll, - .mmap = v4l_stk_mmap, - .unlocked_ioctl = video_ioctl2, -}; - -static const struct v4l2_ioctl_ops v4l_stk_ioctl_ops = { - .vidioc_querycap = stk_vidioc_querycap, - .vidioc_enum_fmt_vid_cap = stk_vidioc_enum_fmt_vid_cap, - .vidioc_try_fmt_vid_cap = stk_vidioc_try_fmt_vid_cap, - .vidioc_s_fmt_vid_cap = stk_vidioc_s_fmt_vid_cap, - .vidioc_g_fmt_vid_cap = stk_vidioc_g_fmt_vid_cap, - .vidioc_enum_input = stk_vidioc_enum_input, - .vidioc_s_input = stk_vidioc_s_input, - .vidioc_g_input = stk_vidioc_g_input, - .vidioc_reqbufs = stk_vidioc_reqbufs, - .vidioc_querybuf = stk_vidioc_querybuf, - .vidioc_qbuf = stk_vidioc_qbuf, - .vidioc_dqbuf = stk_vidioc_dqbuf, - .vidioc_streamon = stk_vidioc_streamon, - .vidioc_streamoff = stk_vidioc_streamoff, - .vidioc_g_parm = stk_vidioc_g_parm, - .vidioc_enum_framesizes = stk_vidioc_enum_framesizes, - .vidioc_log_status = v4l2_ctrl_log_status, - .vidioc_subscribe_event = v4l2_ctrl_subscribe_event, - .vidioc_unsubscribe_event = v4l2_event_unsubscribe, -}; - -static void stk_v4l_dev_release(struct video_device *vd) -{ - struct stk_camera *dev = vdev_to_camera(vd); - - if (dev->sio_bufs != NULL || dev->isobufs != NULL) - pr_err("We are leaking memory\n"); - usb_put_intf(dev->interface); - usb_put_dev(dev->udev); - - v4l2_ctrl_handler_free(&dev->hdl); - v4l2_device_unregister(&dev->v4l2_dev); - kfree(dev); -} - -static const struct video_device stk_v4l_data = { - .name = "stkwebcam", - .fops = &v4l_stk_fops, - .ioctl_ops = &v4l_stk_ioctl_ops, - .release = stk_v4l_dev_release, -}; - - -static int stk_register_video_device(struct stk_camera *dev) -{ - int err; - - dev->vdev = stk_v4l_data; - dev->vdev.lock = &dev->lock; - dev->vdev.v4l2_dev = &dev->v4l2_dev; - dev->vdev.device_caps = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_READWRITE | - V4L2_CAP_STREAMING; - video_set_drvdata(&dev->vdev, dev); - err = video_register_device(&dev->vdev, VFL_TYPE_VIDEO, -1); - if (err) - pr_err("v4l registration failed\n"); - else - pr_info("Syntek USB2.0 Camera is now controlling device %s\n", - video_device_node_name(&dev->vdev)); - return err; -} - - -/* USB Stuff */ - -static int stk_camera_probe(struct usb_interface *interface, - const struct usb_device_id *id) -{ - struct v4l2_ctrl_handler *hdl; - int err = 0; - int i; - - struct stk_camera *dev = NULL; - struct usb_device *udev = interface_to_usbdev(interface); - struct usb_host_interface *iface_desc; - struct usb_endpoint_descriptor *endpoint; - - dev = kzalloc(sizeof(struct stk_camera), GFP_KERNEL); - if (dev == NULL) { - pr_err("Out of memory !\n"); - return -ENOMEM; - } - err = v4l2_device_register(&interface->dev, &dev->v4l2_dev); - if (err < 0) { - dev_err(&udev->dev, "couldn't register v4l2_device\n"); - kfree(dev); - return err; - } - hdl = &dev->hdl; - v4l2_ctrl_handler_init(hdl, 3); - v4l2_ctrl_new_std(hdl, &stk_ctrl_ops, - V4L2_CID_BRIGHTNESS, 0, 0xff, 0x1, 0x60); - v4l2_ctrl_new_std(hdl, &stk_ctrl_ops, - V4L2_CID_HFLIP, 0, 1, 1, 1); - v4l2_ctrl_new_std(hdl, &stk_ctrl_ops, - V4L2_CID_VFLIP, 0, 1, 1, 1); - if (hdl->error) { - err = hdl->error; - dev_err(&udev->dev, "couldn't register control\n"); - goto error; - } - dev->v4l2_dev.ctrl_handler = hdl; - - spin_lock_init(&dev->spinlock); - mutex_init(&dev->lock); - init_waitqueue_head(&dev->wait_frame); - dev->first_init = 1; /* webcam LED management */ - - dev->udev = usb_get_dev(udev); - dev->interface = interface; - usb_get_intf(interface); - - if (hflip != -1) - dev->vsettings.hflip = hflip; - else if (dmi_check_system(stk_upside_down_dmi_table)) - dev->vsettings.hflip = 1; - else - dev->vsettings.hflip = 0; - if (vflip != -1) - dev->vsettings.vflip = vflip; - else if (dmi_check_system(stk_upside_down_dmi_table)) - dev->vsettings.vflip = 1; - else - dev->vsettings.vflip = 0; - dev->n_sbufs = 0; - set_present(dev); - - /* Set up the endpoint information - * use only the first isoc-in endpoint - * for the current alternate setting */ - iface_desc = interface->cur_altsetting; - - for (i = 0; i < iface_desc->desc.bNumEndpoints; ++i) { - endpoint = &iface_desc->endpoint[i].desc; - - if (!dev->isoc_ep - && usb_endpoint_is_isoc_in(endpoint)) { - /* we found an isoc in endpoint */ - dev->isoc_ep = usb_endpoint_num(endpoint); - break; - } - } - if (!dev->isoc_ep) { - pr_err("Could not find isoc-in endpoint\n"); - err = -ENODEV; - goto error_put; - } - dev->vsettings.palette = V4L2_PIX_FMT_RGB565; - dev->vsettings.mode = MODE_VGA; - dev->frame_size = 640 * 480 * 2; - - INIT_LIST_HEAD(&dev->sio_avail); - INIT_LIST_HEAD(&dev->sio_full); - - usb_set_intfdata(interface, dev); - - err = stk_register_video_device(dev); - if (err) - goto error_put; - - return 0; - -error_put: - usb_put_intf(interface); - usb_put_dev(dev->udev); -error: - v4l2_ctrl_handler_free(hdl); - v4l2_device_unregister(&dev->v4l2_dev); - kfree(dev); - return err; -} - -static void stk_camera_disconnect(struct usb_interface *interface) -{ - struct stk_camera *dev = usb_get_intfdata(interface); - - usb_set_intfdata(interface, NULL); - unset_present(dev); - - wake_up_interruptible(&dev->wait_frame); - - pr_info("Syntek USB2.0 Camera release resources device %s\n", - video_device_node_name(&dev->vdev)); - - video_unregister_device(&dev->vdev); -} - -#ifdef CONFIG_PM -static int stk_camera_suspend(struct usb_interface *intf, pm_message_t message) -{ - struct stk_camera *dev = usb_get_intfdata(intf); - if (is_streaming(dev)) { - stk_stop_stream(dev); - /* yes, this is ugly */ - set_streaming(dev); - } - return 0; -} - -static int stk_camera_resume(struct usb_interface *intf) -{ - struct stk_camera *dev = usb_get_intfdata(intf); - if (!is_initialised(dev)) - return 0; - unset_initialised(dev); - stk_initialise(dev); - stk_camera_write_reg(dev, 0x0, 0x49); - stk_setup_format(dev); - if (is_streaming(dev)) - stk_start_stream(dev); - return 0; -} -#endif - -static struct usb_driver stk_camera_driver = { - .name = "stkwebcam", - .probe = stk_camera_probe, - .disconnect = stk_camera_disconnect, - .id_table = stkwebcam_table, -#ifdef CONFIG_PM - .suspend = stk_camera_suspend, - .resume = stk_camera_resume, -#endif -}; - -module_usb_driver(stk_camera_driver); diff --git a/drivers/staging/media/deprecated/stkwebcam/stk-webcam.h b/drivers/staging/media/deprecated/stkwebcam/stk-webcam.h deleted file mode 100644 index 136decffe9ce..000000000000 --- a/drivers/staging/media/deprecated/stkwebcam/stk-webcam.h +++ /dev/null @@ -1,123 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-or-later */ -/* - * stk-webcam.h : Driver for Syntek 1125 USB webcam controller - * - * Copyright (C) 2006 Nicolas VIVIEN - * Copyright 2007-2008 Jaime Velasco Juan - */ - -#ifndef STKWEBCAM_H -#define STKWEBCAM_H - -#include -#include -#include -#include - -#define DRIVER_VERSION "v0.0.1" -#define DRIVER_VERSION_NUM 0x000001 - -#define MAX_ISO_BUFS 3 -#define ISO_FRAMES_PER_DESC 16 -#define ISO_MAX_FRAME_SIZE 3 * 1024 -#define ISO_BUFFER_SIZE (ISO_FRAMES_PER_DESC * ISO_MAX_FRAME_SIZE) - -struct stk_iso_buf { - void *data; - int length; - int read; - struct urb *urb; -}; - -/* Streaming IO buffers */ -struct stk_sio_buffer { - struct v4l2_buffer v4lbuf; - char *buffer; - int mapcount; - struct stk_camera *dev; - struct list_head list; -}; - -enum stk_mode {MODE_VGA, MODE_SXGA, MODE_CIF, MODE_QVGA, MODE_QCIF}; - -struct stk_video { - enum stk_mode mode; - __u32 palette; - int hflip; - int vflip; -}; - -enum stk_status { - S_PRESENT = 1, - S_INITIALISED = 2, - S_MEMALLOCD = 4, - S_STREAMING = 8, -}; -#define is_present(dev) ((dev)->status & S_PRESENT) -#define is_initialised(dev) ((dev)->status & S_INITIALISED) -#define is_streaming(dev) ((dev)->status & S_STREAMING) -#define is_memallocd(dev) ((dev)->status & S_MEMALLOCD) -#define set_present(dev) ((dev)->status = S_PRESENT) -#define unset_present(dev) ((dev)->status &= \ - ~(S_PRESENT|S_INITIALISED|S_STREAMING)) -#define set_initialised(dev) ((dev)->status |= S_INITIALISED) -#define unset_initialised(dev) ((dev)->status &= ~S_INITIALISED) -#define set_memallocd(dev) ((dev)->status |= S_MEMALLOCD) -#define unset_memallocd(dev) ((dev)->status &= ~S_MEMALLOCD) -#define set_streaming(dev) ((dev)->status |= S_STREAMING) -#define unset_streaming(dev) ((dev)->status &= ~S_STREAMING) - -struct regval { - unsigned reg; - unsigned val; -}; - -struct stk_camera { - struct v4l2_device v4l2_dev; - struct v4l2_ctrl_handler hdl; - struct video_device vdev; - struct usb_device *udev; - struct usb_interface *interface; - int webcam_model; - struct file *owner; - struct mutex lock; - int first_init; - - u8 isoc_ep; - - /* Not sure if this is right */ - atomic_t urbs_used; - - struct stk_video vsettings; - - enum stk_status status; - - spinlock_t spinlock; - wait_queue_head_t wait_frame; - - struct stk_iso_buf *isobufs; - - int frame_size; - /* Streaming buffers */ - int reading; - unsigned int n_sbufs; - struct stk_sio_buffer *sio_bufs; - struct list_head sio_avail; - struct list_head sio_full; - unsigned sequence; - - u8 read_reg_scratch; -}; - -#define vdev_to_camera(d) container_of(d, struct stk_camera, vdev) - -int stk_camera_write_reg(struct stk_camera *, u16, u8); -int stk_camera_read_reg(struct stk_camera *, u16, u8 *); - -int stk_sensor_init(struct stk_camera *); -int stk_sensor_configure(struct stk_camera *); -int stk_sensor_sleep(struct stk_camera *dev); -int stk_sensor_wakeup(struct stk_camera *dev); -int stk_sensor_set_brightness(struct stk_camera *dev, int br); - -#endif From patchwork Wed Jan 11 10:52:50 2023 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Hans Verkuil X-Patchwork-Id: 13096401 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id ACA30C678D6 for ; Wed, 11 Jan 2023 10:53:46 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S238735AbjAKKxX (ORCPT ); Wed, 11 Jan 2023 05:53:23 -0500 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:37200 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S238629AbjAKKxN (ORCPT ); Wed, 11 Jan 2023 05:53:13 -0500 Received: from ams.source.kernel.org (ams.source.kernel.org [145.40.68.75]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 328D72018 for ; Wed, 11 Jan 2023 02:53:10 -0800 (PST) Received: from smtp.kernel.org (relay.kernel.org [52.25.139.140]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by ams.source.kernel.org (Postfix) with ESMTPS id 8F7F7B81BAD for ; Wed, 11 Jan 2023 10:53:08 +0000 (UTC) Received: by smtp.kernel.org (Postfix) with ESMTPSA id 816E3C433D2; Wed, 11 Jan 2023 10:53:06 +0000 (UTC) From: Hans Verkuil To: linux-media@vger.kernel.org Cc: Lad Prabhakar , Hans Verkuil Subject: [PATCH 05/13] zr364xx: remove deprecated driver Date: Wed, 11 Jan 2023 11:52:50 +0100 Message-Id: <20230111105258.547471-6-hverkuil-cisco@xs4all.nl> X-Mailer: git-send-email 2.39.0 In-Reply-To: <20230111105258.547471-1-hverkuil-cisco@xs4all.nl> References: <20230111105258.547471-1-hverkuil-cisco@xs4all.nl> MIME-Version: 1.0 Precedence: bulk List-ID: X-Mailing-List: linux-media@vger.kernel.org The zr364xx driver does not use the vb2 framework for streaming video, instead it uses the old vb1 framework and nobody stepped in to convert this driver to vb2. The hardware is very old, so the decision was made to remove it altogether since we want to get rid of the old vb1 framework. Signed-off-by: Hans Verkuil --- .../admin-guide/media/dvb-drivers.rst | 1 - .../admin-guide/media/other-usb-cardlist.rst | 11 - .../admin-guide/media/usb-cardlist.rst | 1 - Documentation/admin-guide/media/zr364xx.rst | 102 - MAINTAINERS | 10 - drivers/staging/media/Kconfig | 1 - drivers/staging/media/Makefile | 1 - .../staging/media/deprecated/zr364xx/Kconfig | 18 - .../staging/media/deprecated/zr364xx/Makefile | 3 - drivers/staging/media/deprecated/zr364xx/TODO | 7 - .../media/deprecated/zr364xx/zr364xx.c | 1635 ----------------- 11 files changed, 1790 deletions(-) delete mode 100644 Documentation/admin-guide/media/zr364xx.rst delete mode 100644 drivers/staging/media/deprecated/zr364xx/Kconfig delete mode 100644 drivers/staging/media/deprecated/zr364xx/Makefile delete mode 100644 drivers/staging/media/deprecated/zr364xx/TODO delete mode 100644 drivers/staging/media/deprecated/zr364xx/zr364xx.c diff --git a/Documentation/admin-guide/media/dvb-drivers.rst b/Documentation/admin-guide/media/dvb-drivers.rst index 8df637c375f9..66fa4edd0606 100644 --- a/Documentation/admin-guide/media/dvb-drivers.rst +++ b/Documentation/admin-guide/media/dvb-drivers.rst @@ -13,4 +13,3 @@ Digital TV driver-specific documentation opera-firmware technisat ttusb-dec - zr364xx diff --git a/Documentation/admin-guide/media/other-usb-cardlist.rst b/Documentation/admin-guide/media/other-usb-cardlist.rst index 843f1c509cbc..fb88db50e861 100644 --- a/Documentation/admin-guide/media/other-usb-cardlist.rst +++ b/Documentation/admin-guide/media/other-usb-cardlist.rst @@ -75,15 +75,4 @@ dvb-ttusb_dec Technotrend/Hauppauge MPEG decoder DEC2540-t 0b48:1009 usbtv Fushicai USBTV007 Audio-Video Grabber 1b71:3002, 1f71:3301, 1f71:3306 -zr364xx USB ZR364XX Camera 08ca:0109, 041e:4024, - 0d64:0108, 0546:3187, - 0d64:3108, 0595:4343, - 0bb0:500d, 0feb:2004, - 055f:b500, 08ca:2062, - 052b:1a18, 04c8:0729, - 04f2:a208, 0784:0040, - 06d6:0034, 0a17:0062, - 06d6:003b, 0a17:004e, - 041e:405d, 08ca:2102, - 06d6:003d ================ ====================================== ===================== diff --git a/Documentation/admin-guide/media/usb-cardlist.rst b/Documentation/admin-guide/media/usb-cardlist.rst index d5fd7249033d..071ec3958b3a 100644 --- a/Documentation/admin-guide/media/usb-cardlist.rst +++ b/Documentation/admin-guide/media/usb-cardlist.rst @@ -99,7 +99,6 @@ ttusb_dec Technotrend/Hauppauge USB DEC devices usbtv USBTV007 video capture uvcvideo USB Video Class (UVC) zd1301 ZyDAS ZD1301 -zr364xx USB ZR364XX Camera ====================== ========================================================= .. toctree:: diff --git a/Documentation/admin-guide/media/zr364xx.rst b/Documentation/admin-guide/media/zr364xx.rst deleted file mode 100644 index 7291e54b8be3..000000000000 --- a/Documentation/admin-guide/media/zr364xx.rst +++ /dev/null @@ -1,102 +0,0 @@ -.. SPDX-License-Identifier: GPL-2.0 - -Zoran 364xx based USB webcam module -=================================== - -site: http://royale.zerezo.com/zr364xx/ - -mail: royale@zerezo.com - - -Introduction ------------- - - -This brings support under Linux for the Aiptek PocketDV 3300 and similar -devices in webcam mode. If you just want to get on your PC the pictures -and movies on the camera, you should use the usb-storage module instead. - -The driver works with several other cameras in webcam mode (see the list -below). - -Possible chipsets are : ZR36430 (ZR36430BGC) and -maybe ZR36431, ZR36440, ZR36442... - -You can try the experience changing the vendor/product ID values (look -at the source code). - -You can get these values by looking at /var/log/messages when you plug -your camera, or by typing : cat /sys/kernel/debug/usb/devices. - - -Install -------- - -In order to use this driver, you must compile it with your kernel, -with the following config options:: - - ./scripts/config -e USB - ./scripts/config -m MEDIA_SUPPORT - ./scripts/config -e MEDIA_USB_SUPPORT - ./scripts/config -e MEDIA_CAMERA_SUPPORT - ./scripts/config -m USB_ZR364XX - -Usage ------ - -modprobe zr364xx debug=X mode=Y - -- debug : set to 1 to enable verbose debug messages -- mode : 0 = 320x240, 1 = 160x120, 2 = 640x480 - -You can then use the camera with V4L2 compatible applications, for -example Ekiga. - -To capture a single image, try this: dd if=/dev/video0 of=test.jpg bs=1M -count=1 - -links ------ - -http://mxhaard.free.fr/ (support for many others cams including some Aiptek PocketDV) -http://www.harmwal.nl/pccam880/ (this project also supports cameras based on this chipset) - -Supported devices ------------------ - -====== ======= ============== ==================== -Vendor Product Distributor Model -====== ======= ============== ==================== -0x08ca 0x0109 Aiptek PocketDV 3300 -0x08ca 0x0109 Maxell Maxcam PRO DV3 -0x041e 0x4024 Creative PC-CAM 880 -0x0d64 0x0108 Aiptek Fidelity 3200 -0x0d64 0x0108 Praktica DCZ 1.3 S -0x0d64 0x0108 Genius Digital Camera (?) -0x0d64 0x0108 DXG Technology Fashion Cam -0x0546 0x3187 Polaroid iON 230 -0x0d64 0x3108 Praktica Exakta DC 2200 -0x0d64 0x3108 Genius G-Shot D211 -0x0595 0x4343 Concord Eye-Q Duo 1300 -0x0595 0x4343 Concord Eye-Q Duo 2000 -0x0595 0x4343 Fujifilm EX-10 -0x0595 0x4343 Ricoh RDC-6000 -0x0595 0x4343 Digitrex DSC 1300 -0x0595 0x4343 Firstline FDC 2000 -0x0bb0 0x500d Concord EyeQ Go Wireless -0x0feb 0x2004 CRS Electronic 3.3 Digital Camera -0x0feb 0x2004 Packard Bell DSC-300 -0x055f 0xb500 Mustek MDC 3000 -0x08ca 0x2062 Aiptek PocketDV 5700 -0x052b 0x1a18 Chiphead Megapix V12 -0x04c8 0x0729 Konica Revio 2 -0x04f2 0xa208 Creative PC-CAM 850 -0x0784 0x0040 Traveler Slimline X5 -0x06d6 0x0034 Trust Powerc@m 750 -0x0a17 0x0062 Pentax Optio 50L -0x06d6 0x003b Trust Powerc@m 970Z -0x0a17 0x004e Pentax Optio 50 -0x041e 0x405d Creative DiVi CAM 516 -0x08ca 0x2102 Aiptek DV T300 -0x06d6 0x003d Trust Powerc@m 910Z -====== ======= ============== ==================== diff --git a/MAINTAINERS b/MAINTAINERS index f814ab594ea4..1a95b9bc6824 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -21719,16 +21719,6 @@ S: Orphan W: http://linux-lc100020.sourceforge.net F: drivers/net/wireless/zydas/zd1201.* -USB ZR364XX DRIVER -M: Antoine Jacquet -L: linux-usb@vger.kernel.org -L: linux-media@vger.kernel.org -S: Maintained -W: http://royale.zerezo.com/zr364xx/ -T: git git://linuxtv.org/media_tree.git -F: Documentation/admin-guide/media/zr364xx* -F: drivers/staging/media/deprecated/zr364xx/ - USER-MODE LINUX (UML) M: Richard Weinberger M: Anton Ivanov diff --git a/drivers/staging/media/Kconfig b/drivers/staging/media/Kconfig index d1c7e7597a10..57699d4fc232 100644 --- a/drivers/staging/media/Kconfig +++ b/drivers/staging/media/Kconfig @@ -55,7 +55,6 @@ source "drivers/staging/media/deprecated/atmel/Kconfig" source "drivers/staging/media/deprecated/saa7146/Kconfig" source "drivers/staging/media/deprecated/tm6000/Kconfig" source "drivers/staging/media/deprecated/vpfe_capture/Kconfig" -source "drivers/staging/media/deprecated/zr364xx/Kconfig" endif endif diff --git a/drivers/staging/media/Makefile b/drivers/staging/media/Makefile index da2e4f0fb7cb..591e1df6e83e 100644 --- a/drivers/staging/media/Makefile +++ b/drivers/staging/media/Makefile @@ -10,6 +10,5 @@ obj-$(CONFIG_VIDEO_SUNXI) += sunxi/ obj-$(CONFIG_VIDEO_TEGRA) += tegra-video/ obj-$(CONFIG_VIDEO_IPU3_IMGU) += ipu3/ obj-$(CONFIG_VIDEO_TM6000) += deprecated/tm6000/ -obj-$(CONFIG_USB_ZR364XX) += deprecated/zr364xx/ obj-y += deprecated/vpfe_capture/ obj-y += deprecated/saa7146/ diff --git a/drivers/staging/media/deprecated/zr364xx/Kconfig b/drivers/staging/media/deprecated/zr364xx/Kconfig deleted file mode 100644 index ea29c9d8dca2..000000000000 --- a/drivers/staging/media/deprecated/zr364xx/Kconfig +++ /dev/null @@ -1,18 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0-only -config USB_ZR364XX - tristate "USB ZR364XX Camera support (DEPRECATED)" - depends on USB && VIDEO_DEV - select VIDEOBUF_GEN - select VIDEOBUF_VMALLOC - help - Say Y here if you want to connect this type of camera to your - computer's USB port. - See for more info - and list of supported cameras. - - This driver is deprecated and is scheduled for removal by - the beginning of 2023. See the TODO file for more information. - - To compile this driver as a module, choose M here: the - module will be called zr364xx. - diff --git a/drivers/staging/media/deprecated/zr364xx/Makefile b/drivers/staging/media/deprecated/zr364xx/Makefile deleted file mode 100644 index edab017d499c..000000000000 --- a/drivers/staging/media/deprecated/zr364xx/Makefile +++ /dev/null @@ -1,3 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0-only -obj-$(CONFIG_USB_ZR364XX) += zr364xx.o - diff --git a/drivers/staging/media/deprecated/zr364xx/TODO b/drivers/staging/media/deprecated/zr364xx/TODO deleted file mode 100644 index ecb30a429689..000000000000 --- a/drivers/staging/media/deprecated/zr364xx/TODO +++ /dev/null @@ -1,7 +0,0 @@ -This is one of the few drivers still not using the vb2 -framework, so this driver is now deprecated with the intent of -removing it altogether by the beginning of 2023. - -In order to keep this driver it has to be converted to vb2. -If someone is interested in doing this work, then contact the -linux-media mailinglist (https://linuxtv.org/lists.php). diff --git a/drivers/staging/media/deprecated/zr364xx/zr364xx.c b/drivers/staging/media/deprecated/zr364xx/zr364xx.c deleted file mode 100644 index 538a330046ec..000000000000 --- a/drivers/staging/media/deprecated/zr364xx/zr364xx.c +++ /dev/null @@ -1,1635 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/* - * Zoran 364xx based USB webcam module version 0.73 - * - * Allows you to use your USB webcam with V4L2 applications - * This is still in heavy development ! - * - * Copyright (C) 2004 Antoine Jacquet - * http://royale.zerezo.com/zr364xx/ - * - * Heavily inspired by usb-skeleton.c, vicam.c, cpia.c and spca50x.c drivers - * V4L2 version inspired by meye.c driver - * - * Some video buffer code by Lamarque based on s2255drv.c and vivi.c drivers. - */ - - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - - -/* Version Information */ -#define DRIVER_VERSION "0.7.4" -#define DRIVER_AUTHOR "Antoine Jacquet, http://royale.zerezo.com/" -#define DRIVER_DESC "Zoran 364xx" - - -/* Camera */ -#define FRAMES 1 -#define MAX_FRAME_SIZE 200000 -#define BUFFER_SIZE 0x1000 -#define CTRL_TIMEOUT 500 - -#define ZR364XX_DEF_BUFS 4 -#define ZR364XX_READ_IDLE 0 -#define ZR364XX_READ_FRAME 1 - -/* Debug macro */ -#define DBG(fmt, args...) \ - do { \ - if (debug) { \ - printk(KERN_INFO KBUILD_MODNAME " " fmt, ##args); \ - } \ - } while (0) - -/*#define FULL_DEBUG 1*/ -#ifdef FULL_DEBUG -#define _DBG DBG -#else -#define _DBG(fmt, args...) -#endif - -/* Init methods, need to find nicer names for these - * the exact names of the chipsets would be the best if someone finds it */ -#define METHOD0 0 -#define METHOD1 1 -#define METHOD2 2 -#define METHOD3 3 - - -/* Module parameters */ -static int debug; -static int mode; - - -/* Module parameters interface */ -module_param(debug, int, 0644); -MODULE_PARM_DESC(debug, "Debug level"); -module_param(mode, int, 0644); -MODULE_PARM_DESC(mode, "0 = 320x240, 1 = 160x120, 2 = 640x480"); - - -/* Devices supported by this driver - * .driver_info contains the init method used by the camera */ -static const struct usb_device_id device_table[] = { - {USB_DEVICE(0x08ca, 0x0109), .driver_info = METHOD0 }, - {USB_DEVICE(0x041e, 0x4024), .driver_info = METHOD0 }, - {USB_DEVICE(0x0d64, 0x0108), .driver_info = METHOD0 }, - {USB_DEVICE(0x0546, 0x3187), .driver_info = METHOD0 }, - {USB_DEVICE(0x0d64, 0x3108), .driver_info = METHOD0 }, - {USB_DEVICE(0x0595, 0x4343), .driver_info = METHOD0 }, - {USB_DEVICE(0x0bb0, 0x500d), .driver_info = METHOD0 }, - {USB_DEVICE(0x0feb, 0x2004), .driver_info = METHOD0 }, - {USB_DEVICE(0x055f, 0xb500), .driver_info = METHOD0 }, - {USB_DEVICE(0x08ca, 0x2062), .driver_info = METHOD2 }, - {USB_DEVICE(0x052b, 0x1a18), .driver_info = METHOD1 }, - {USB_DEVICE(0x04c8, 0x0729), .driver_info = METHOD0 }, - {USB_DEVICE(0x04f2, 0xa208), .driver_info = METHOD0 }, - {USB_DEVICE(0x0784, 0x0040), .driver_info = METHOD1 }, - {USB_DEVICE(0x06d6, 0x0034), .driver_info = METHOD0 }, - {USB_DEVICE(0x0a17, 0x0062), .driver_info = METHOD2 }, - {USB_DEVICE(0x06d6, 0x003b), .driver_info = METHOD0 }, - {USB_DEVICE(0x0a17, 0x004e), .driver_info = METHOD2 }, - {USB_DEVICE(0x041e, 0x405d), .driver_info = METHOD2 }, - {USB_DEVICE(0x08ca, 0x2102), .driver_info = METHOD3 }, - {USB_DEVICE(0x06d6, 0x003d), .driver_info = METHOD0 }, - {} /* Terminating entry */ -}; - -MODULE_DEVICE_TABLE(usb, device_table); - -/* frame structure */ -struct zr364xx_framei { - unsigned long ulState; /* ulState:ZR364XX_READ_IDLE, - ZR364XX_READ_FRAME */ - void *lpvbits; /* image data */ - unsigned long cur_size; /* current data copied to it */ -}; - -/* image buffer structure */ -struct zr364xx_bufferi { - unsigned long dwFrames; /* number of frames in buffer */ - struct zr364xx_framei frame[FRAMES]; /* array of FRAME structures */ -}; - -struct zr364xx_dmaqueue { - struct list_head active; - struct zr364xx_camera *cam; -}; - -struct zr364xx_pipeinfo { - u32 transfer_size; - u8 *transfer_buffer; - u32 state; - void *stream_urb; - void *cam; /* back pointer to zr364xx_camera struct */ - u32 err_count; - u32 idx; -}; - -struct zr364xx_fmt { - u32 fourcc; - int depth; -}; - -/* image formats. */ -static const struct zr364xx_fmt formats[] = { - { - .fourcc = V4L2_PIX_FMT_JPEG, - .depth = 24 - } -}; - -/* Camera stuff */ -struct zr364xx_camera { - struct usb_device *udev; /* save off the usb device pointer */ - struct usb_interface *interface;/* the interface for this device */ - struct v4l2_device v4l2_dev; - struct v4l2_ctrl_handler ctrl_handler; - struct video_device vdev; /* v4l video device */ - struct v4l2_fh *owner; /* owns the streaming */ - int nb; - struct zr364xx_bufferi buffer; - int skip; - int width; - int height; - int method; - struct mutex lock; - - spinlock_t slock; - struct zr364xx_dmaqueue vidq; - int last_frame; - int cur_frame; - unsigned long frame_count; - int b_acquire; - struct zr364xx_pipeinfo pipe[1]; - - u8 read_endpoint; - - const struct zr364xx_fmt *fmt; - struct videobuf_queue vb_vidq; - bool was_streaming; -}; - -/* buffer for one video frame */ -struct zr364xx_buffer { - /* common v4l buffer stuff -- must be first */ - struct videobuf_buffer vb; - const struct zr364xx_fmt *fmt; -}; - -/* function used to send initialisation commands to the camera */ -static int send_control_msg(struct usb_device *udev, u8 request, u16 value, - u16 index, unsigned char *cp, u16 size) -{ - int status; - - unsigned char *transfer_buffer = kmemdup(cp, size, GFP_KERNEL); - if (!transfer_buffer) - return -ENOMEM; - - status = usb_control_msg(udev, - usb_sndctrlpipe(udev, 0), - request, - USB_DIR_OUT | USB_TYPE_VENDOR | - USB_RECIP_DEVICE, value, index, - transfer_buffer, size, CTRL_TIMEOUT); - - kfree(transfer_buffer); - return status; -} - - -/* Control messages sent to the camera to initialize it - * and launch the capture */ -typedef struct { - unsigned int value; - unsigned int size; - unsigned char *bytes; -} message; - -/* method 0 */ -static unsigned char m0d1[] = { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }; -static unsigned char m0d2[] = { 0, 0, 0, 0, 0, 0 }; -static unsigned char m0d3[] = { 0, 0 }; -static message m0[] = { - {0x1f30, 0, NULL}, - {0xd000, 0, NULL}, - {0x3370, sizeof(m0d1), m0d1}, - {0x2000, 0, NULL}, - {0x2f0f, 0, NULL}, - {0x2610, sizeof(m0d2), m0d2}, - {0xe107, 0, NULL}, - {0x2502, 0, NULL}, - {0x1f70, 0, NULL}, - {0xd000, 0, NULL}, - {0x9a01, sizeof(m0d3), m0d3}, - {-1, -1, NULL} -}; - -/* method 1 */ -static unsigned char m1d1[] = { 0xff, 0xff }; -static unsigned char m1d2[] = { 0x00, 0x00 }; -static message m1[] = { - {0x1f30, 0, NULL}, - {0xd000, 0, NULL}, - {0xf000, 0, NULL}, - {0x2000, 0, NULL}, - {0x2f0f, 0, NULL}, - {0x2650, 0, NULL}, - {0xe107, 0, NULL}, - {0x2502, sizeof(m1d1), m1d1}, - {0x1f70, 0, NULL}, - {0xd000, 0, NULL}, - {0xd000, 0, NULL}, - {0xd000, 0, NULL}, - {0x9a01, sizeof(m1d2), m1d2}, - {-1, -1, NULL} -}; - -/* method 2 */ -static unsigned char m2d1[] = { 0xff, 0xff }; -static message m2[] = { - {0x1f30, 0, NULL}, - {0xf000, 0, NULL}, - {0x2000, 0, NULL}, - {0x2f0f, 0, NULL}, - {0x2650, 0, NULL}, - {0xe107, 0, NULL}, - {0x2502, sizeof(m2d1), m2d1}, - {0x1f70, 0, NULL}, - {-1, -1, NULL} -}; - -/* init table */ -static message *init[4] = { m0, m1, m2, m2 }; - - -/* JPEG static data in header (Huffman table, etc) */ -static unsigned char header1[] = { - 0xFF, 0xD8, - /* - 0xFF, 0xE0, 0x00, 0x10, 'J', 'F', 'I', 'F', - 0x00, 0x01, 0x01, 0x00, 0x33, 0x8A, 0x00, 0x00, 0x33, 0x88, - */ - 0xFF, 0xDB, 0x00, 0x84 -}; -static unsigned char header2[] = { - 0xFF, 0xC4, 0x00, 0x1F, 0x00, 0x00, 0x01, 0x05, 0x01, 0x01, 0x01, - 0x01, 0x01, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07, 0x08, 0x09, 0x0A, 0x0B, - 0xFF, 0xC4, 0x00, 0xB5, 0x10, 0x00, 0x02, 0x01, 0x03, 0x03, 0x02, - 0x04, 0x03, 0x05, 0x05, 0x04, 0x04, 0x00, 0x00, 0x01, 0x7D, 0x01, - 0x02, 0x03, 0x00, 0x04, 0x11, 0x05, 0x12, 0x21, 0x31, 0x41, 0x06, - 0x13, 0x51, 0x61, 0x07, 0x22, 0x71, 0x14, 0x32, 0x81, 0x91, 0xA1, - 0x08, 0x23, 0x42, 0xB1, 0xC1, 0x15, 0x52, 0xD1, 0xF0, 0x24, 0x33, - 0x62, 0x72, 0x82, 0x09, 0x0A, 0x16, 0x17, 0x18, 0x19, 0x1A, 0x25, - 0x26, 0x27, 0x28, 0x29, 0x2A, 0x34, 0x35, 0x36, 0x37, 0x38, 0x39, - 0x3A, 0x43, 0x44, 0x45, 0x46, 0x47, 0x48, 0x49, 0x4A, 0x53, 0x54, - 0x55, 0x56, 0x57, 0x58, 0x59, 0x5A, 0x63, 0x64, 0x65, 0x66, 0x67, - 0x68, 0x69, 0x6A, 0x73, 0x74, 0x75, 0x76, 0x77, 0x78, 0x79, 0x7A, - 0x83, 0x84, 0x85, 0x86, 0x87, 0x88, 0x89, 0x8A, 0x92, 0x93, 0x94, - 0x95, 0x96, 0x97, 0x98, 0x99, 0x9A, 0xA2, 0xA3, 0xA4, 0xA5, 0xA6, - 0xA7, 0xA8, 0xA9, 0xAA, 0xB2, 0xB3, 0xB4, 0xB5, 0xB6, 0xB7, 0xB8, - 0xB9, 0xBA, 0xC2, 0xC3, 0xC4, 0xC5, 0xC6, 0xC7, 0xC8, 0xC9, 0xCA, - 0xD2, 0xD3, 0xD4, 0xD5, 0xD6, 0xD7, 0xD8, 0xD9, 0xDA, 0xE1, 0xE2, - 0xE3, 0xE4, 0xE5, 0xE6, 0xE7, 0xE8, 0xE9, 0xEA, 0xF1, 0xF2, 0xF3, - 0xF4, 0xF5, 0xF6, 0xF7, 0xF8, 0xF9, 0xFA, 0xFF, 0xC4, 0x00, 0x1F, - 0x01, 0x00, 0x03, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, - 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x02, 0x03, 0x04, - 0x05, 0x06, 0x07, 0x08, 0x09, 0x0A, 0x0B, 0xFF, 0xC4, 0x00, 0xB5, - 0x11, 0x00, 0x02, 0x01, 0x02, 0x04, 0x04, 0x03, 0x04, 0x07, 0x05, - 0x04, 0x04, 0x00, 0x01, 0x02, 0x77, 0x00, 0x01, 0x02, 0x03, 0x11, - 0x04, 0x05, 0x21, 0x31, 0x06, 0x12, 0x41, 0x51, 0x07, 0x61, 0x71, - 0x13, 0x22, 0x32, 0x81, 0x08, 0x14, 0x42, 0x91, 0xA1, 0xB1, 0xC1, - 0x09, 0x23, 0x33, 0x52, 0xF0, 0x15, 0x62, 0x72, 0xD1, 0x0A, 0x16, - 0x24, 0x34, 0xE1, 0x25, 0xF1, 0x17, 0x18, 0x19, 0x1A, 0x26, 0x27, - 0x28, 0x29, 0x2A, 0x35, 0x36, 0x37, 0x38, 0x39, 0x3A, 0x43, 0x44, - 0x45, 0x46, 0x47, 0x48, 0x49, 0x4A, 0x53, 0x54, 0x55, 0x56, 0x57, - 0x58, 0x59, 0x5A, 0x63, 0x64, 0x65, 0x66, 0x67, 0x68, 0x69, 0x6A, - 0x73, 0x74, 0x75, 0x76, 0x77, 0x78, 0x79, 0x7A, 0x82, 0x83, 0x84, - 0x85, 0x86, 0x87, 0x88, 0x89, 0x8A, 0x92, 0x93, 0x94, 0x95, 0x96, - 0x97, 0x98, 0x99, 0x9A, 0xA2, 0xA3, 0xA4, 0xA5, 0xA6, 0xA7, 0xA8, - 0xA9, 0xAA, 0xB2, 0xB3, 0xB4, 0xB5, 0xB6, 0xB7, 0xB8, 0xB9, 0xBA, - 0xC2, 0xC3, 0xC4, 0xC5, 0xC6, 0xC7, 0xC8, 0xC9, 0xCA, 0xD2, 0xD3, - 0xD4, 0xD5, 0xD6, 0xD7, 0xD8, 0xD9, 0xDA, 0xE2, 0xE3, 0xE4, 0xE5, - 0xE6, 0xE7, 0xE8, 0xE9, 0xEA, 0xF2, 0xF3, 0xF4, 0xF5, 0xF6, 0xF7, - 0xF8, 0xF9, 0xFA, 0xFF, 0xC0, 0x00, 0x11, 0x08, 0x00, 0xF0, 0x01, - 0x40, 0x03, 0x01, 0x21, 0x00, 0x02, 0x11, 0x01, 0x03, 0x11, 0x01, - 0xFF, 0xDA, 0x00, 0x0C, 0x03, 0x01, 0x00, 0x02, 0x11, 0x03, 0x11, - 0x00, 0x3F, 0x00 -}; -static unsigned char header3; - -/* ------------------------------------------------------------------ - Videobuf operations - ------------------------------------------------------------------*/ - -static int buffer_setup(struct videobuf_queue *vq, unsigned int *count, - unsigned int *size) -{ - struct zr364xx_camera *cam = vq->priv_data; - - *size = cam->width * cam->height * (cam->fmt->depth >> 3); - - if (*count == 0) - *count = ZR364XX_DEF_BUFS; - - if (*size * *count > ZR364XX_DEF_BUFS * 1024 * 1024) - *count = (ZR364XX_DEF_BUFS * 1024 * 1024) / *size; - - return 0; -} - -static void free_buffer(struct videobuf_queue *vq, struct zr364xx_buffer *buf) -{ - _DBG("%s\n", __func__); - - videobuf_vmalloc_free(&buf->vb); - buf->vb.state = VIDEOBUF_NEEDS_INIT; -} - -static int buffer_prepare(struct videobuf_queue *vq, struct videobuf_buffer *vb, - enum v4l2_field field) -{ - struct zr364xx_camera *cam = vq->priv_data; - struct zr364xx_buffer *buf = container_of(vb, struct zr364xx_buffer, - vb); - int rc; - - DBG("%s, field=%d\n", __func__, field); - if (!cam->fmt) - return -EINVAL; - - buf->vb.size = cam->width * cam->height * (cam->fmt->depth >> 3); - - if (buf->vb.baddr != 0 && buf->vb.bsize < buf->vb.size) { - DBG("invalid buffer prepare\n"); - return -EINVAL; - } - - buf->fmt = cam->fmt; - buf->vb.width = cam->width; - buf->vb.height = cam->height; - buf->vb.field = field; - - if (buf->vb.state == VIDEOBUF_NEEDS_INIT) { - rc = videobuf_iolock(vq, &buf->vb, NULL); - if (rc < 0) - goto fail; - } - - buf->vb.state = VIDEOBUF_PREPARED; - return 0; -fail: - free_buffer(vq, buf); - return rc; -} - -static void buffer_queue(struct videobuf_queue *vq, struct videobuf_buffer *vb) -{ - struct zr364xx_buffer *buf = container_of(vb, struct zr364xx_buffer, - vb); - struct zr364xx_camera *cam = vq->priv_data; - - _DBG("%s\n", __func__); - - buf->vb.state = VIDEOBUF_QUEUED; - list_add_tail(&buf->vb.queue, &cam->vidq.active); -} - -static void buffer_release(struct videobuf_queue *vq, - struct videobuf_buffer *vb) -{ - struct zr364xx_buffer *buf = container_of(vb, struct zr364xx_buffer, - vb); - - _DBG("%s\n", __func__); - free_buffer(vq, buf); -} - -static const struct videobuf_queue_ops zr364xx_video_qops = { - .buf_setup = buffer_setup, - .buf_prepare = buffer_prepare, - .buf_queue = buffer_queue, - .buf_release = buffer_release, -}; - -/********************/ -/* V4L2 integration */ -/********************/ -static int zr364xx_vidioc_streamon(struct file *file, void *priv, - enum v4l2_buf_type type); - -static ssize_t zr364xx_read(struct file *file, char __user *buf, size_t count, - loff_t * ppos) -{ - struct zr364xx_camera *cam = video_drvdata(file); - int err = 0; - - _DBG("%s\n", __func__); - - if (!buf) - return -EINVAL; - - if (!count) - return -EINVAL; - - if (mutex_lock_interruptible(&cam->lock)) - return -ERESTARTSYS; - - err = zr364xx_vidioc_streamon(file, file->private_data, - V4L2_BUF_TYPE_VIDEO_CAPTURE); - if (err == 0) { - DBG("%s: reading %d bytes at pos %d.\n", __func__, - (int) count, (int) *ppos); - - /* NoMan Sux ! */ - err = videobuf_read_one(&cam->vb_vidq, buf, count, ppos, - file->f_flags & O_NONBLOCK); - } - mutex_unlock(&cam->lock); - return err; -} - -/* video buffer vmalloc implementation based partly on VIVI driver which is - * Copyright (c) 2006 by - * Mauro Carvalho Chehab - * Ted Walther - * John Sokol - * http://v4l.videotechnology.com/ - * - */ -static void zr364xx_fillbuff(struct zr364xx_camera *cam, - struct zr364xx_buffer *buf, - int jpgsize) -{ - int pos = 0; - const char *tmpbuf; - char *vbuf = videobuf_to_vmalloc(&buf->vb); - unsigned long last_frame; - - if (!vbuf) - return; - - last_frame = cam->last_frame; - if (last_frame != -1) { - tmpbuf = (const char *)cam->buffer.frame[last_frame].lpvbits; - switch (buf->fmt->fourcc) { - case V4L2_PIX_FMT_JPEG: - buf->vb.size = jpgsize; - memcpy(vbuf, tmpbuf, buf->vb.size); - break; - default: - printk(KERN_DEBUG KBUILD_MODNAME ": unknown format?\n"); - } - cam->last_frame = -1; - } else { - printk(KERN_ERR KBUILD_MODNAME ": =======no frame\n"); - return; - } - DBG("%s: Buffer %p size= %d\n", __func__, vbuf, pos); - /* tell v4l buffer was filled */ - - buf->vb.field_count = cam->frame_count * 2; - buf->vb.ts = ktime_get_ns(); - buf->vb.state = VIDEOBUF_DONE; -} - -static int zr364xx_got_frame(struct zr364xx_camera *cam, int jpgsize) -{ - struct zr364xx_dmaqueue *dma_q = &cam->vidq; - struct zr364xx_buffer *buf; - unsigned long flags = 0; - int rc = 0; - - DBG("wakeup: %p\n", &dma_q); - spin_lock_irqsave(&cam->slock, flags); - - if (list_empty(&dma_q->active)) { - DBG("No active queue to serve\n"); - rc = -1; - goto unlock; - } - buf = list_entry(dma_q->active.next, - struct zr364xx_buffer, vb.queue); - - if (!waitqueue_active(&buf->vb.done)) { - /* no one active */ - rc = -1; - goto unlock; - } - list_del(&buf->vb.queue); - buf->vb.ts = ktime_get_ns(); - DBG("[%p/%d] wakeup\n", buf, buf->vb.i); - zr364xx_fillbuff(cam, buf, jpgsize); - wake_up(&buf->vb.done); - DBG("wakeup [buf/i] [%p/%d]\n", buf, buf->vb.i); -unlock: - spin_unlock_irqrestore(&cam->slock, flags); - return rc; -} - -/* this function moves the usb stream read pipe data - * into the system buffers. - * returns 0 on success, EAGAIN if more data to process (call this - * function again). - */ -static int zr364xx_read_video_callback(struct zr364xx_camera *cam, - struct zr364xx_pipeinfo *pipe_info, - struct urb *purb) -{ - unsigned char *pdest; - unsigned char *psrc; - s32 idx = cam->cur_frame; - struct zr364xx_framei *frm = &cam->buffer.frame[idx]; - int i = 0; - unsigned char *ptr = NULL; - - _DBG("buffer to user\n"); - - /* swap bytes if camera needs it */ - if (cam->method == METHOD0) { - u16 *buf = (u16 *)pipe_info->transfer_buffer; - for (i = 0; i < purb->actual_length/2; i++) - swab16s(buf + i); - } - - /* search done. now find out if should be acquiring */ - if (!cam->b_acquire) { - /* we found a frame, but this channel is turned off */ - frm->ulState = ZR364XX_READ_IDLE; - return -EINVAL; - } - - psrc = (u8 *)pipe_info->transfer_buffer; - ptr = pdest = frm->lpvbits; - - if (frm->ulState == ZR364XX_READ_IDLE) { - if (purb->actual_length < 128) { - /* header incomplete */ - dev_info(&cam->udev->dev, - "%s: buffer (%d bytes) too small to hold jpeg header. Discarding.\n", - __func__, purb->actual_length); - return -EINVAL; - } - - frm->ulState = ZR364XX_READ_FRAME; - frm->cur_size = 0; - - _DBG("jpeg header, "); - memcpy(ptr, header1, sizeof(header1)); - ptr += sizeof(header1); - header3 = 0; - memcpy(ptr, &header3, 1); - ptr++; - memcpy(ptr, psrc, 64); - ptr += 64; - header3 = 1; - memcpy(ptr, &header3, 1); - ptr++; - memcpy(ptr, psrc + 64, 64); - ptr += 64; - memcpy(ptr, header2, sizeof(header2)); - ptr += sizeof(header2); - memcpy(ptr, psrc + 128, - purb->actual_length - 128); - ptr += purb->actual_length - 128; - _DBG("header : %d %d %d %d %d %d %d %d %d\n", - psrc[0], psrc[1], psrc[2], - psrc[3], psrc[4], psrc[5], - psrc[6], psrc[7], psrc[8]); - frm->cur_size = ptr - pdest; - } else { - if (frm->cur_size + purb->actual_length > MAX_FRAME_SIZE) { - dev_info(&cam->udev->dev, - "%s: buffer (%d bytes) too small to hold frame data. Discarding frame data.\n", - __func__, MAX_FRAME_SIZE); - } else { - pdest += frm->cur_size; - memcpy(pdest, psrc, purb->actual_length); - frm->cur_size += purb->actual_length; - } - } - /*_DBG("cur_size %lu urb size %d\n", frm->cur_size, - purb->actual_length);*/ - - if (purb->actual_length < pipe_info->transfer_size) { - _DBG("****************Buffer[%d]full*************\n", idx); - cam->last_frame = cam->cur_frame; - cam->cur_frame++; - /* end of system frame ring buffer, start at zero */ - if (cam->cur_frame == cam->buffer.dwFrames) - cam->cur_frame = 0; - - /* frame ready */ - /* go back to find the JPEG EOI marker */ - ptr = pdest = frm->lpvbits; - ptr += frm->cur_size - 2; - while (ptr > pdest) { - if (*ptr == 0xFF && *(ptr + 1) == 0xD9 - && *(ptr + 2) == 0xFF) - break; - ptr--; - } - if (ptr == pdest) - DBG("No EOI marker\n"); - - /* Sometimes there is junk data in the middle of the picture, - * we want to skip this bogus frames */ - while (ptr > pdest) { - if (*ptr == 0xFF && *(ptr + 1) == 0xFF - && *(ptr + 2) == 0xFF) - break; - ptr--; - } - if (ptr != pdest) { - DBG("Bogus frame ? %d\n", ++(cam->nb)); - } else if (cam->b_acquire) { - /* we skip the 2 first frames which are usually buggy */ - if (cam->skip) - cam->skip--; - else { - _DBG("jpeg(%lu): %d %d %d %d %d %d %d %d\n", - frm->cur_size, - pdest[0], pdest[1], pdest[2], pdest[3], - pdest[4], pdest[5], pdest[6], pdest[7]); - - zr364xx_got_frame(cam, frm->cur_size); - } - } - cam->frame_count++; - frm->ulState = ZR364XX_READ_IDLE; - frm->cur_size = 0; - } - /* done successfully */ - return 0; -} - -static int zr364xx_vidioc_querycap(struct file *file, void *priv, - struct v4l2_capability *cap) -{ - struct zr364xx_camera *cam = video_drvdata(file); - - strscpy(cap->driver, DRIVER_DESC, sizeof(cap->driver)); - if (cam->udev->product) - strscpy(cap->card, cam->udev->product, sizeof(cap->card)); - strscpy(cap->bus_info, dev_name(&cam->udev->dev), - sizeof(cap->bus_info)); - return 0; -} - -static int zr364xx_vidioc_enum_input(struct file *file, void *priv, - struct v4l2_input *i) -{ - if (i->index != 0) - return -EINVAL; - strscpy(i->name, DRIVER_DESC " Camera", sizeof(i->name)); - i->type = V4L2_INPUT_TYPE_CAMERA; - return 0; -} - -static int zr364xx_vidioc_g_input(struct file *file, void *priv, - unsigned int *i) -{ - *i = 0; - return 0; -} - -static int zr364xx_vidioc_s_input(struct file *file, void *priv, - unsigned int i) -{ - if (i != 0) - return -EINVAL; - return 0; -} - -static int zr364xx_s_ctrl(struct v4l2_ctrl *ctrl) -{ - struct zr364xx_camera *cam = - container_of(ctrl->handler, struct zr364xx_camera, ctrl_handler); - int temp; - - switch (ctrl->id) { - case V4L2_CID_BRIGHTNESS: - /* hardware brightness */ - send_control_msg(cam->udev, 1, 0x2001, 0, NULL, 0); - temp = (0x60 << 8) + 127 - ctrl->val; - send_control_msg(cam->udev, 1, temp, 0, NULL, 0); - break; - default: - return -EINVAL; - } - - return 0; -} - -static int zr364xx_vidioc_enum_fmt_vid_cap(struct file *file, - void *priv, struct v4l2_fmtdesc *f) -{ - if (f->index > 0) - return -EINVAL; - f->pixelformat = formats[0].fourcc; - return 0; -} - -static char *decode_fourcc(__u32 pixelformat, char *buf) -{ - buf[0] = pixelformat & 0xff; - buf[1] = (pixelformat >> 8) & 0xff; - buf[2] = (pixelformat >> 16) & 0xff; - buf[3] = (pixelformat >> 24) & 0xff; - buf[4] = '\0'; - return buf; -} - -static int zr364xx_vidioc_try_fmt_vid_cap(struct file *file, void *priv, - struct v4l2_format *f) -{ - struct zr364xx_camera *cam = video_drvdata(file); - char pixelformat_name[5]; - - if (!cam) - return -ENODEV; - - if (f->fmt.pix.pixelformat != V4L2_PIX_FMT_JPEG) { - DBG("%s: unsupported pixelformat V4L2_PIX_FMT_%s\n", __func__, - decode_fourcc(f->fmt.pix.pixelformat, pixelformat_name)); - return -EINVAL; - } - - if (!(f->fmt.pix.width == 160 && f->fmt.pix.height == 120) && - !(f->fmt.pix.width == 640 && f->fmt.pix.height == 480)) { - f->fmt.pix.width = 320; - f->fmt.pix.height = 240; - } - - f->fmt.pix.field = V4L2_FIELD_NONE; - f->fmt.pix.bytesperline = f->fmt.pix.width * 2; - f->fmt.pix.sizeimage = f->fmt.pix.height * f->fmt.pix.bytesperline; - f->fmt.pix.colorspace = V4L2_COLORSPACE_JPEG; - DBG("%s: V4L2_PIX_FMT_%s (%d) ok!\n", __func__, - decode_fourcc(f->fmt.pix.pixelformat, pixelformat_name), - f->fmt.pix.field); - return 0; -} - -static int zr364xx_vidioc_g_fmt_vid_cap(struct file *file, void *priv, - struct v4l2_format *f) -{ - struct zr364xx_camera *cam; - - if (!file) - return -ENODEV; - cam = video_drvdata(file); - - f->fmt.pix.pixelformat = formats[0].fourcc; - f->fmt.pix.field = V4L2_FIELD_NONE; - f->fmt.pix.width = cam->width; - f->fmt.pix.height = cam->height; - f->fmt.pix.bytesperline = f->fmt.pix.width * 2; - f->fmt.pix.sizeimage = f->fmt.pix.height * f->fmt.pix.bytesperline; - f->fmt.pix.colorspace = V4L2_COLORSPACE_JPEG; - return 0; -} - -static int zr364xx_vidioc_s_fmt_vid_cap(struct file *file, void *priv, - struct v4l2_format *f) -{ - struct zr364xx_camera *cam = video_drvdata(file); - struct videobuf_queue *q = &cam->vb_vidq; - char pixelformat_name[5]; - int ret = zr364xx_vidioc_try_fmt_vid_cap(file, cam, f); - int i; - - if (ret < 0) - return ret; - - mutex_lock(&q->vb_lock); - - if (videobuf_queue_is_busy(&cam->vb_vidq)) { - DBG("%s queue busy\n", __func__); - ret = -EBUSY; - goto out; - } - - if (cam->owner) { - DBG("%s can't change format after started\n", __func__); - ret = -EBUSY; - goto out; - } - - cam->width = f->fmt.pix.width; - cam->height = f->fmt.pix.height; - DBG("%s: %dx%d mode selected\n", __func__, - cam->width, cam->height); - f->fmt.pix.bytesperline = f->fmt.pix.width * 2; - f->fmt.pix.sizeimage = f->fmt.pix.height * f->fmt.pix.bytesperline; - f->fmt.pix.colorspace = V4L2_COLORSPACE_JPEG; - cam->vb_vidq.field = f->fmt.pix.field; - - if (f->fmt.pix.width == 160 && f->fmt.pix.height == 120) - mode = 1; - else if (f->fmt.pix.width == 640 && f->fmt.pix.height == 480) - mode = 2; - else - mode = 0; - - m0d1[0] = mode; - m1[2].value = 0xf000 + mode; - m2[1].value = 0xf000 + mode; - - /* special case for METHOD3, the modes are different */ - if (cam->method == METHOD3) { - switch (mode) { - case 1: - m2[1].value = 0xf000 + 4; - break; - case 2: - m2[1].value = 0xf000 + 0; - break; - default: - m2[1].value = 0xf000 + 1; - break; - } - } - - header2[437] = cam->height / 256; - header2[438] = cam->height % 256; - header2[439] = cam->width / 256; - header2[440] = cam->width % 256; - - for (i = 0; init[cam->method][i].size != -1; i++) { - ret = - send_control_msg(cam->udev, 1, init[cam->method][i].value, - 0, init[cam->method][i].bytes, - init[cam->method][i].size); - if (ret < 0) { - dev_err(&cam->udev->dev, - "error during resolution change sequence: %d\n", i); - goto out; - } - } - - /* Added some delay here, since opening/closing the camera quickly, - * like Ekiga does during its startup, can crash the webcam - */ - mdelay(100); - cam->skip = 2; - ret = 0; - -out: - mutex_unlock(&q->vb_lock); - - DBG("%s: V4L2_PIX_FMT_%s (%d) ok!\n", __func__, - decode_fourcc(f->fmt.pix.pixelformat, pixelformat_name), - f->fmt.pix.field); - return ret; -} - -static int zr364xx_vidioc_reqbufs(struct file *file, void *priv, - struct v4l2_requestbuffers *p) -{ - struct zr364xx_camera *cam = video_drvdata(file); - - if (cam->owner && cam->owner != priv) - return -EBUSY; - return videobuf_reqbufs(&cam->vb_vidq, p); -} - -static int zr364xx_vidioc_querybuf(struct file *file, - void *priv, - struct v4l2_buffer *p) -{ - int rc; - struct zr364xx_camera *cam = video_drvdata(file); - rc = videobuf_querybuf(&cam->vb_vidq, p); - return rc; -} - -static int zr364xx_vidioc_qbuf(struct file *file, - void *priv, - struct v4l2_buffer *p) -{ - int rc; - struct zr364xx_camera *cam = video_drvdata(file); - _DBG("%s\n", __func__); - if (cam->owner && cam->owner != priv) - return -EBUSY; - rc = videobuf_qbuf(&cam->vb_vidq, p); - return rc; -} - -static int zr364xx_vidioc_dqbuf(struct file *file, - void *priv, - struct v4l2_buffer *p) -{ - int rc; - struct zr364xx_camera *cam = video_drvdata(file); - _DBG("%s\n", __func__); - if (cam->owner && cam->owner != priv) - return -EBUSY; - rc = videobuf_dqbuf(&cam->vb_vidq, p, file->f_flags & O_NONBLOCK); - return rc; -} - -static void read_pipe_completion(struct urb *purb) -{ - struct zr364xx_pipeinfo *pipe_info; - struct zr364xx_camera *cam; - int pipe; - - pipe_info = purb->context; - _DBG("%s %p, status %d\n", __func__, purb, purb->status); - if (!pipe_info) { - printk(KERN_ERR KBUILD_MODNAME ": no context!\n"); - return; - } - - cam = pipe_info->cam; - if (!cam) { - printk(KERN_ERR KBUILD_MODNAME ": no context!\n"); - return; - } - - /* if shutting down, do not resubmit, exit immediately */ - if (purb->status == -ESHUTDOWN) { - DBG("%s, err shutdown\n", __func__); - pipe_info->err_count++; - return; - } - - if (pipe_info->state == 0) { - DBG("exiting USB pipe\n"); - return; - } - - if (purb->actual_length > pipe_info->transfer_size) { - dev_err(&cam->udev->dev, "wrong number of bytes\n"); - return; - } - - if (purb->status == 0) - zr364xx_read_video_callback(cam, pipe_info, purb); - else { - pipe_info->err_count++; - DBG("%s: failed URB %d\n", __func__, purb->status); - } - - pipe = usb_rcvbulkpipe(cam->udev, cam->read_endpoint); - - /* reuse urb */ - usb_fill_bulk_urb(pipe_info->stream_urb, cam->udev, - pipe, - pipe_info->transfer_buffer, - pipe_info->transfer_size, - read_pipe_completion, pipe_info); - - if (pipe_info->state != 0) { - purb->status = usb_submit_urb(pipe_info->stream_urb, - GFP_ATOMIC); - - if (purb->status) - dev_err(&cam->udev->dev, - "error submitting urb (error=%i)\n", - purb->status); - } else - DBG("read pipe complete state 0\n"); -} - -static int zr364xx_start_readpipe(struct zr364xx_camera *cam) -{ - int pipe; - int retval; - struct zr364xx_pipeinfo *pipe_info = cam->pipe; - pipe = usb_rcvbulkpipe(cam->udev, cam->read_endpoint); - DBG("%s: start pipe IN x%x\n", __func__, cam->read_endpoint); - - pipe_info->state = 1; - pipe_info->err_count = 0; - pipe_info->stream_urb = usb_alloc_urb(0, GFP_KERNEL); - if (!pipe_info->stream_urb) - return -ENOMEM; - /* transfer buffer allocated in board_init */ - usb_fill_bulk_urb(pipe_info->stream_urb, cam->udev, - pipe, - pipe_info->transfer_buffer, - pipe_info->transfer_size, - read_pipe_completion, pipe_info); - - DBG("submitting URB %p\n", pipe_info->stream_urb); - retval = usb_submit_urb(pipe_info->stream_urb, GFP_KERNEL); - if (retval) { - usb_free_urb(pipe_info->stream_urb); - printk(KERN_ERR KBUILD_MODNAME ": start read pipe failed\n"); - return retval; - } - - return 0; -} - -static void zr364xx_stop_readpipe(struct zr364xx_camera *cam) -{ - struct zr364xx_pipeinfo *pipe_info; - - if (!cam) { - printk(KERN_ERR KBUILD_MODNAME ": invalid device\n"); - return; - } - DBG("stop read pipe\n"); - pipe_info = cam->pipe; - if (pipe_info) { - if (pipe_info->state != 0) - pipe_info->state = 0; - - if (pipe_info->stream_urb) { - /* cancel urb */ - usb_kill_urb(pipe_info->stream_urb); - usb_free_urb(pipe_info->stream_urb); - pipe_info->stream_urb = NULL; - } - } - return; -} - -/* starts acquisition process */ -static int zr364xx_start_acquire(struct zr364xx_camera *cam) -{ - int j; - - DBG("start acquire\n"); - - cam->last_frame = -1; - cam->cur_frame = 0; - for (j = 0; j < FRAMES; j++) { - cam->buffer.frame[j].ulState = ZR364XX_READ_IDLE; - cam->buffer.frame[j].cur_size = 0; - } - cam->b_acquire = 1; - return 0; -} - -static inline int zr364xx_stop_acquire(struct zr364xx_camera *cam) -{ - cam->b_acquire = 0; - return 0; -} - -static int zr364xx_prepare(struct zr364xx_camera *cam) -{ - int res; - int i, j; - - for (i = 0; init[cam->method][i].size != -1; i++) { - res = send_control_msg(cam->udev, 1, init[cam->method][i].value, - 0, init[cam->method][i].bytes, - init[cam->method][i].size); - if (res < 0) { - dev_err(&cam->udev->dev, - "error during open sequence: %d\n", i); - return res; - } - } - - cam->skip = 2; - cam->last_frame = -1; - cam->cur_frame = 0; - cam->frame_count = 0; - for (j = 0; j < FRAMES; j++) { - cam->buffer.frame[j].ulState = ZR364XX_READ_IDLE; - cam->buffer.frame[j].cur_size = 0; - } - v4l2_ctrl_handler_setup(&cam->ctrl_handler); - return 0; -} - -static int zr364xx_vidioc_streamon(struct file *file, void *priv, - enum v4l2_buf_type type) -{ - struct zr364xx_camera *cam = video_drvdata(file); - int res; - - DBG("%s\n", __func__); - - if (type != V4L2_BUF_TYPE_VIDEO_CAPTURE) - return -EINVAL; - - if (cam->owner && cam->owner != priv) - return -EBUSY; - - res = zr364xx_prepare(cam); - if (res) - return res; - res = videobuf_streamon(&cam->vb_vidq); - if (res == 0) { - zr364xx_start_acquire(cam); - cam->owner = file->private_data; - } - return res; -} - -static int zr364xx_vidioc_streamoff(struct file *file, void *priv, - enum v4l2_buf_type type) -{ - struct zr364xx_camera *cam = video_drvdata(file); - - DBG("%s\n", __func__); - if (type != V4L2_BUF_TYPE_VIDEO_CAPTURE) - return -EINVAL; - if (cam->owner && cam->owner != priv) - return -EBUSY; - zr364xx_stop_acquire(cam); - return videobuf_streamoff(&cam->vb_vidq); -} - - -/* open the camera */ -static int zr364xx_open(struct file *file) -{ - struct zr364xx_camera *cam = video_drvdata(file); - int err; - - DBG("%s\n", __func__); - - if (mutex_lock_interruptible(&cam->lock)) - return -ERESTARTSYS; - - err = v4l2_fh_open(file); - if (err) - goto out; - - /* Added some delay here, since opening/closing the camera quickly, - * like Ekiga does during its startup, can crash the webcam - */ - mdelay(100); - err = 0; - -out: - mutex_unlock(&cam->lock); - DBG("%s: %d\n", __func__, err); - return err; -} - -static void zr364xx_board_uninit(struct zr364xx_camera *cam) -{ - unsigned long i; - - zr364xx_stop_readpipe(cam); - - /* release sys buffers */ - for (i = 0; i < FRAMES; i++) { - if (cam->buffer.frame[i].lpvbits) { - DBG("vfree %p\n", cam->buffer.frame[i].lpvbits); - vfree(cam->buffer.frame[i].lpvbits); - } - cam->buffer.frame[i].lpvbits = NULL; - } - - /* release transfer buffer */ - kfree(cam->pipe->transfer_buffer); -} - -static void zr364xx_release(struct v4l2_device *v4l2_dev) -{ - struct zr364xx_camera *cam = - container_of(v4l2_dev, struct zr364xx_camera, v4l2_dev); - - videobuf_mmap_free(&cam->vb_vidq); - v4l2_ctrl_handler_free(&cam->ctrl_handler); - zr364xx_board_uninit(cam); - v4l2_device_unregister(&cam->v4l2_dev); - kfree(cam); -} - -/* release the camera */ -static int zr364xx_close(struct file *file) -{ - struct zr364xx_camera *cam; - struct usb_device *udev; - int i; - - DBG("%s\n", __func__); - cam = video_drvdata(file); - - mutex_lock(&cam->lock); - udev = cam->udev; - - if (file->private_data == cam->owner) { - /* turn off stream */ - if (cam->b_acquire) - zr364xx_stop_acquire(cam); - videobuf_streamoff(&cam->vb_vidq); - - for (i = 0; i < 2; i++) { - send_control_msg(udev, 1, init[cam->method][i].value, - 0, init[cam->method][i].bytes, - init[cam->method][i].size); - } - cam->owner = NULL; - } - - /* Added some delay here, since opening/closing the camera quickly, - * like Ekiga does during its startup, can crash the webcam - */ - mdelay(100); - mutex_unlock(&cam->lock); - return v4l2_fh_release(file); -} - - -static int zr364xx_mmap(struct file *file, struct vm_area_struct *vma) -{ - struct zr364xx_camera *cam = video_drvdata(file); - int ret; - - if (!cam) { - DBG("%s: cam == NULL\n", __func__); - return -ENODEV; - } - DBG("mmap called, vma=%p\n", vma); - - ret = videobuf_mmap_mapper(&cam->vb_vidq, vma); - - DBG("vma start=0x%08lx, size=%ld, ret=%d\n", - (unsigned long)vma->vm_start, - (unsigned long)vma->vm_end - (unsigned long)vma->vm_start, ret); - return ret; -} - -static __poll_t zr364xx_poll(struct file *file, - struct poll_table_struct *wait) -{ - struct zr364xx_camera *cam = video_drvdata(file); - struct videobuf_queue *q = &cam->vb_vidq; - __poll_t res = v4l2_ctrl_poll(file, wait); - - _DBG("%s\n", __func__); - - return res | videobuf_poll_stream(file, q, wait); -} - -static const struct v4l2_ctrl_ops zr364xx_ctrl_ops = { - .s_ctrl = zr364xx_s_ctrl, -}; - -static const struct v4l2_file_operations zr364xx_fops = { - .owner = THIS_MODULE, - .open = zr364xx_open, - .release = zr364xx_close, - .read = zr364xx_read, - .mmap = zr364xx_mmap, - .unlocked_ioctl = video_ioctl2, - .poll = zr364xx_poll, -}; - -static const struct v4l2_ioctl_ops zr364xx_ioctl_ops = { - .vidioc_querycap = zr364xx_vidioc_querycap, - .vidioc_enum_fmt_vid_cap = zr364xx_vidioc_enum_fmt_vid_cap, - .vidioc_try_fmt_vid_cap = zr364xx_vidioc_try_fmt_vid_cap, - .vidioc_s_fmt_vid_cap = zr364xx_vidioc_s_fmt_vid_cap, - .vidioc_g_fmt_vid_cap = zr364xx_vidioc_g_fmt_vid_cap, - .vidioc_enum_input = zr364xx_vidioc_enum_input, - .vidioc_g_input = zr364xx_vidioc_g_input, - .vidioc_s_input = zr364xx_vidioc_s_input, - .vidioc_streamon = zr364xx_vidioc_streamon, - .vidioc_streamoff = zr364xx_vidioc_streamoff, - .vidioc_reqbufs = zr364xx_vidioc_reqbufs, - .vidioc_querybuf = zr364xx_vidioc_querybuf, - .vidioc_qbuf = zr364xx_vidioc_qbuf, - .vidioc_dqbuf = zr364xx_vidioc_dqbuf, - .vidioc_log_status = v4l2_ctrl_log_status, - .vidioc_subscribe_event = v4l2_ctrl_subscribe_event, - .vidioc_unsubscribe_event = v4l2_event_unsubscribe, -}; - -static const struct video_device zr364xx_template = { - .name = DRIVER_DESC, - .fops = &zr364xx_fops, - .ioctl_ops = &zr364xx_ioctl_ops, - .release = video_device_release_empty, - .device_caps = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_READWRITE | - V4L2_CAP_STREAMING, -}; - - - -/*******************/ -/* USB integration */ -/*******************/ -static int zr364xx_board_init(struct zr364xx_camera *cam) -{ - struct zr364xx_pipeinfo *pipe = cam->pipe; - unsigned long i; - int err; - - DBG("board init: %p\n", cam); - memset(pipe, 0, sizeof(*pipe)); - pipe->cam = cam; - pipe->transfer_size = BUFFER_SIZE; - - pipe->transfer_buffer = kzalloc(pipe->transfer_size, - GFP_KERNEL); - if (!pipe->transfer_buffer) { - DBG("out of memory!\n"); - return -ENOMEM; - } - - cam->b_acquire = 0; - cam->frame_count = 0; - - /*** start create system buffers ***/ - for (i = 0; i < FRAMES; i++) { - /* always allocate maximum size for system buffers */ - cam->buffer.frame[i].lpvbits = vmalloc(MAX_FRAME_SIZE); - - DBG("valloc %p, idx %lu, pdata %p\n", - &cam->buffer.frame[i], i, - cam->buffer.frame[i].lpvbits); - if (!cam->buffer.frame[i].lpvbits) { - printk(KERN_INFO KBUILD_MODNAME ": out of memory. Using less frames\n"); - break; - } - } - - if (i == 0) { - printk(KERN_INFO KBUILD_MODNAME ": out of memory. Aborting\n"); - err = -ENOMEM; - goto err_free; - } else - cam->buffer.dwFrames = i; - - /* make sure internal states are set */ - for (i = 0; i < FRAMES; i++) { - cam->buffer.frame[i].ulState = ZR364XX_READ_IDLE; - cam->buffer.frame[i].cur_size = 0; - } - - cam->cur_frame = 0; - cam->last_frame = -1; - /*** end create system buffers ***/ - - /* start read pipe */ - err = zr364xx_start_readpipe(cam); - if (err) - goto err_free_frames; - - DBG(": board initialized\n"); - return 0; - -err_free_frames: - for (i = 0; i < FRAMES; i++) - vfree(cam->buffer.frame[i].lpvbits); -err_free: - kfree(cam->pipe->transfer_buffer); - cam->pipe->transfer_buffer = NULL; - return err; -} - -static int zr364xx_probe(struct usb_interface *intf, - const struct usb_device_id *id) -{ - struct usb_device *udev = interface_to_usbdev(intf); - struct zr364xx_camera *cam = NULL; - struct usb_host_interface *iface_desc; - struct usb_endpoint_descriptor *endpoint; - struct v4l2_ctrl_handler *hdl; - int err; - int i; - - DBG("probing...\n"); - - dev_info(&intf->dev, DRIVER_DESC " compatible webcam plugged\n"); - dev_info(&intf->dev, "model %04x:%04x detected\n", - le16_to_cpu(udev->descriptor.idVendor), - le16_to_cpu(udev->descriptor.idProduct)); - - cam = kzalloc(sizeof(*cam), GFP_KERNEL); - if (!cam) - return -ENOMEM; - - err = v4l2_device_register(&intf->dev, &cam->v4l2_dev); - if (err < 0) { - dev_err(&udev->dev, "couldn't register v4l2_device\n"); - goto free_cam; - } - hdl = &cam->ctrl_handler; - v4l2_ctrl_handler_init(hdl, 1); - v4l2_ctrl_new_std(hdl, &zr364xx_ctrl_ops, - V4L2_CID_BRIGHTNESS, 0, 127, 1, 64); - if (hdl->error) { - err = hdl->error; - dev_err(&udev->dev, "couldn't register control\n"); - goto free_hdlr_and_unreg_dev; - } - /* save the init method used by this camera */ - cam->method = id->driver_info; - mutex_init(&cam->lock); - cam->vdev = zr364xx_template; - cam->vdev.lock = &cam->lock; - cam->vdev.v4l2_dev = &cam->v4l2_dev; - cam->vdev.ctrl_handler = &cam->ctrl_handler; - video_set_drvdata(&cam->vdev, cam); - - cam->udev = udev; - - switch (mode) { - case 1: - dev_info(&udev->dev, "160x120 mode selected\n"); - cam->width = 160; - cam->height = 120; - break; - case 2: - dev_info(&udev->dev, "640x480 mode selected\n"); - cam->width = 640; - cam->height = 480; - break; - default: - dev_info(&udev->dev, "320x240 mode selected\n"); - cam->width = 320; - cam->height = 240; - break; - } - - m0d1[0] = mode; - m1[2].value = 0xf000 + mode; - m2[1].value = 0xf000 + mode; - - /* special case for METHOD3, the modes are different */ - if (cam->method == METHOD3) { - switch (mode) { - case 1: - m2[1].value = 0xf000 + 4; - break; - case 2: - m2[1].value = 0xf000 + 0; - break; - default: - m2[1].value = 0xf000 + 1; - break; - } - } - - header2[437] = cam->height / 256; - header2[438] = cam->height % 256; - header2[439] = cam->width / 256; - header2[440] = cam->width % 256; - - cam->nb = 0; - - DBG("dev: %p, udev %p interface %p\n", cam, cam->udev, intf); - - /* set up the endpoint information */ - iface_desc = intf->cur_altsetting; - DBG("num endpoints %d\n", iface_desc->desc.bNumEndpoints); - for (i = 0; i < iface_desc->desc.bNumEndpoints; ++i) { - endpoint = &iface_desc->endpoint[i].desc; - if (!cam->read_endpoint && usb_endpoint_is_bulk_in(endpoint)) { - /* we found the bulk in endpoint */ - cam->read_endpoint = endpoint->bEndpointAddress; - } - } - - if (!cam->read_endpoint) { - err = -ENOMEM; - dev_err(&intf->dev, "Could not find bulk-in endpoint\n"); - goto free_hdlr_and_unreg_dev; - } - - /* v4l */ - INIT_LIST_HEAD(&cam->vidq.active); - cam->vidq.cam = cam; - - usb_set_intfdata(intf, cam); - - /* load zr364xx board specific */ - err = zr364xx_board_init(cam); - if (err) - goto free_hdlr_and_unreg_dev; - err = v4l2_ctrl_handler_setup(hdl); - if (err) - goto board_uninit; - - spin_lock_init(&cam->slock); - - cam->fmt = formats; - - videobuf_queue_vmalloc_init(&cam->vb_vidq, &zr364xx_video_qops, - NULL, &cam->slock, - V4L2_BUF_TYPE_VIDEO_CAPTURE, - V4L2_FIELD_NONE, - sizeof(struct zr364xx_buffer), cam, &cam->lock); - - err = video_register_device(&cam->vdev, VFL_TYPE_VIDEO, -1); - if (err) { - dev_err(&udev->dev, "video_register_device failed\n"); - goto board_uninit; - } - cam->v4l2_dev.release = zr364xx_release; - - dev_info(&udev->dev, DRIVER_DESC " controlling device %s\n", - video_device_node_name(&cam->vdev)); - return 0; - -board_uninit: - zr364xx_board_uninit(cam); -free_hdlr_and_unreg_dev: - v4l2_ctrl_handler_free(hdl); - v4l2_device_unregister(&cam->v4l2_dev); -free_cam: - kfree(cam); - return err; -} - - -static void zr364xx_disconnect(struct usb_interface *intf) -{ - struct zr364xx_camera *cam = usb_get_intfdata(intf); - - mutex_lock(&cam->lock); - usb_set_intfdata(intf, NULL); - dev_info(&intf->dev, DRIVER_DESC " webcam unplugged\n"); - video_unregister_device(&cam->vdev); - v4l2_device_disconnect(&cam->v4l2_dev); - - /* stops the read pipe if it is running */ - if (cam->b_acquire) - zr364xx_stop_acquire(cam); - - zr364xx_stop_readpipe(cam); - mutex_unlock(&cam->lock); - v4l2_device_put(&cam->v4l2_dev); -} - - -#ifdef CONFIG_PM -static int zr364xx_suspend(struct usb_interface *intf, pm_message_t message) -{ - struct zr364xx_camera *cam = usb_get_intfdata(intf); - - cam->was_streaming = cam->b_acquire; - if (!cam->was_streaming) - return 0; - zr364xx_stop_acquire(cam); - zr364xx_stop_readpipe(cam); - return 0; -} - -static int zr364xx_resume(struct usb_interface *intf) -{ - struct zr364xx_camera *cam = usb_get_intfdata(intf); - int res; - - if (!cam->was_streaming) - return 0; - - res = zr364xx_start_readpipe(cam); - if (res) - return res; - - res = zr364xx_prepare(cam); - if (res) - goto err_prepare; - - zr364xx_start_acquire(cam); - return 0; - -err_prepare: - zr364xx_stop_readpipe(cam); - return res; -} -#endif - -/**********************/ -/* Module integration */ -/**********************/ - -static struct usb_driver zr364xx_driver = { - .name = "zr364xx", - .probe = zr364xx_probe, - .disconnect = zr364xx_disconnect, -#ifdef CONFIG_PM - .suspend = zr364xx_suspend, - .resume = zr364xx_resume, - .reset_resume = zr364xx_resume, -#endif - .id_table = device_table -}; - -module_usb_driver(zr364xx_driver); - -MODULE_AUTHOR(DRIVER_AUTHOR); -MODULE_DESCRIPTION(DRIVER_DESC); -MODULE_LICENSE("GPL"); -MODULE_VERSION(DRIVER_VERSION); From patchwork Wed Jan 11 10:52:51 2023 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Hans Verkuil X-Patchwork-Id: 13096408 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id CA70FC5479D for ; Wed, 11 Jan 2023 10:54:18 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S238606AbjAKKxw (ORCPT ); Wed, 11 Jan 2023 05:53:52 -0500 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:37222 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S233116AbjAKKxP (ORCPT ); Wed, 11 Jan 2023 05:53:15 -0500 Received: from ams.source.kernel.org (ams.source.kernel.org [IPv6:2604:1380:4601:e00::1]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 750BD1014 for ; Wed, 11 Jan 2023 02:53:11 -0800 (PST) Received: from smtp.kernel.org (relay.kernel.org [52.25.139.140]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by ams.source.kernel.org (Postfix) with ESMTPS id B5525B81BB3 for ; Wed, 11 Jan 2023 10:53:09 +0000 (UTC) Received: by smtp.kernel.org (Postfix) with ESMTPSA id AC557C433EF; Wed, 11 Jan 2023 10:53:07 +0000 (UTC) From: Hans Verkuil To: linux-media@vger.kernel.org Cc: Lad Prabhakar , Hans Verkuil Subject: [PATCH 06/13] vpfe_capture: remove deprecated davinci drivers Date: Wed, 11 Jan 2023 11:52:51 +0100 Message-Id: <20230111105258.547471-7-hverkuil-cisco@xs4all.nl> X-Mailer: git-send-email 2.39.0 In-Reply-To: <20230111105258.547471-1-hverkuil-cisco@xs4all.nl> References: <20230111105258.547471-1-hverkuil-cisco@xs4all.nl> MIME-Version: 1.0 Precedence: bulk List-ID: X-Mailing-List: linux-media@vger.kernel.org The vpfe_capture drivers do not use the vb2 framework for streaming video, instead they use the old vb1 framework and nobody stepped in to convert these drivers to vb2. The hardware is very old, so the decision was made to remove them altogether since we want to get rid of the old vb1 framework. Signed-off-by: Hans Verkuil --- drivers/staging/media/Kconfig | 1 - drivers/staging/media/Makefile | 1 - .../media/deprecated/vpfe_capture/Kconfig | 58 - .../media/deprecated/vpfe_capture/Makefile | 4 - .../media/deprecated/vpfe_capture/TODO | 7 - .../deprecated/vpfe_capture/ccdc_hw_device.h | 80 - .../deprecated/vpfe_capture/dm355_ccdc.c | 934 -------- .../deprecated/vpfe_capture/dm355_ccdc.h | 308 --- .../deprecated/vpfe_capture/dm355_ccdc_regs.h | 297 --- .../deprecated/vpfe_capture/dm644x_ccdc.c | 879 -------- .../deprecated/vpfe_capture/dm644x_ccdc.h | 171 -- .../vpfe_capture/dm644x_ccdc_regs.h | 140 -- .../media/deprecated/vpfe_capture/isif.c | 1127 ---------- .../media/deprecated/vpfe_capture/isif.h | 518 ----- .../media/deprecated/vpfe_capture/isif_regs.h | 256 --- .../deprecated/vpfe_capture/vpfe_capture.c | 1902 ----------------- include/media/davinci/ccdc_types.h | 30 - 17 files changed, 6713 deletions(-) delete mode 100644 drivers/staging/media/deprecated/vpfe_capture/Kconfig delete mode 100644 drivers/staging/media/deprecated/vpfe_capture/Makefile delete mode 100644 drivers/staging/media/deprecated/vpfe_capture/TODO delete mode 100644 drivers/staging/media/deprecated/vpfe_capture/ccdc_hw_device.h delete mode 100644 drivers/staging/media/deprecated/vpfe_capture/dm355_ccdc.c delete mode 100644 drivers/staging/media/deprecated/vpfe_capture/dm355_ccdc.h delete mode 100644 drivers/staging/media/deprecated/vpfe_capture/dm355_ccdc_regs.h delete mode 100644 drivers/staging/media/deprecated/vpfe_capture/dm644x_ccdc.c delete mode 100644 drivers/staging/media/deprecated/vpfe_capture/dm644x_ccdc.h delete mode 100644 drivers/staging/media/deprecated/vpfe_capture/dm644x_ccdc_regs.h delete mode 100644 drivers/staging/media/deprecated/vpfe_capture/isif.c delete mode 100644 drivers/staging/media/deprecated/vpfe_capture/isif.h delete mode 100644 drivers/staging/media/deprecated/vpfe_capture/isif_regs.h delete mode 100644 drivers/staging/media/deprecated/vpfe_capture/vpfe_capture.c delete mode 100644 include/media/davinci/ccdc_types.h diff --git a/drivers/staging/media/Kconfig b/drivers/staging/media/Kconfig index 57699d4fc232..7224f43afd7e 100644 --- a/drivers/staging/media/Kconfig +++ b/drivers/staging/media/Kconfig @@ -54,7 +54,6 @@ if STAGING_MEDIA_DEPRECATED source "drivers/staging/media/deprecated/atmel/Kconfig" source "drivers/staging/media/deprecated/saa7146/Kconfig" source "drivers/staging/media/deprecated/tm6000/Kconfig" -source "drivers/staging/media/deprecated/vpfe_capture/Kconfig" endif endif diff --git a/drivers/staging/media/Makefile b/drivers/staging/media/Makefile index 591e1df6e83e..37a4c6d81ded 100644 --- a/drivers/staging/media/Makefile +++ b/drivers/staging/media/Makefile @@ -10,5 +10,4 @@ obj-$(CONFIG_VIDEO_SUNXI) += sunxi/ obj-$(CONFIG_VIDEO_TEGRA) += tegra-video/ obj-$(CONFIG_VIDEO_IPU3_IMGU) += ipu3/ obj-$(CONFIG_VIDEO_TM6000) += deprecated/tm6000/ -obj-y += deprecated/vpfe_capture/ obj-y += deprecated/saa7146/ diff --git a/drivers/staging/media/deprecated/vpfe_capture/Kconfig b/drivers/staging/media/deprecated/vpfe_capture/Kconfig deleted file mode 100644 index 10250e7e566b..000000000000 --- a/drivers/staging/media/deprecated/vpfe_capture/Kconfig +++ /dev/null @@ -1,58 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0-only -config VIDEO_DM6446_CCDC - tristate "TI DM6446 CCDC video capture driver" - depends on V4L_PLATFORM_DRIVERS - depends on VIDEO_DEV - depends on ARCH_DAVINCI || COMPILE_TEST - depends on I2C - select VIDEOBUF_DMA_CONTIG - help - Enables DaVinci CCD hw module. DaVinci CCDC hw interfaces - with decoder modules such as TVP5146 over BT656 or - sensor module such as MT9T001 over a raw interface. This - module configures the interface and CCDC/ISIF to do - video frame capture from slave decoders. - - This driver is deprecated and is scheduled for removal by - the beginning of 2023. See the TODO file for more information. - - To compile this driver as a module, choose M here. There will - be two modules called vpfe_capture.ko and dm644x_ccdc.ko - -config VIDEO_DM355_CCDC - tristate "TI DM355 CCDC video capture driver" - depends on V4L_PLATFORM_DRIVERS - depends on VIDEO_DEV - depends on ARCH_DAVINCI || COMPILE_TEST - depends on I2C - select VIDEOBUF_DMA_CONTIG - help - Enables DM355 CCD hw module. DM355 CCDC hw interfaces - with decoder modules such as TVP5146 over BT656 or - sensor module such as MT9T001 over a raw interface. This - module configures the interface and CCDC/ISIF to do - video frame capture from a slave decoders - - This driver is deprecated and is scheduled for removal by - the beginning of 2023. See the TODO file for more information. - - To compile this driver as a module, choose M here. There will - be two modules called vpfe_capture.ko and dm355_ccdc.ko - -config VIDEO_DM365_ISIF - tristate "TI DM365 ISIF video capture driver" - depends on V4L_PLATFORM_DRIVERS - depends on VIDEO_DEV - depends on ARCH_DAVINCI || COMPILE_TEST - depends on I2C - select VIDEOBUF_DMA_CONTIG - help - Enables ISIF hw module. This is the hardware module for - configuring ISIF in VPFE to capture Raw Bayer RGB data from - a image sensor or YUV data from a YUV source. - - This driver is deprecated and is scheduled for removal by - the beginning of 2023. See the TODO file for more information. - - To compile this driver as a module, choose M here. There will - be two modules called vpfe_capture.ko and isif.ko diff --git a/drivers/staging/media/deprecated/vpfe_capture/Makefile b/drivers/staging/media/deprecated/vpfe_capture/Makefile deleted file mode 100644 index 609e8dc09ce7..000000000000 --- a/drivers/staging/media/deprecated/vpfe_capture/Makefile +++ /dev/null @@ -1,4 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0 -obj-$(CONFIG_VIDEO_DM6446_CCDC) += vpfe_capture.o dm644x_ccdc.o -obj-$(CONFIG_VIDEO_DM355_CCDC) += vpfe_capture.o dm355_ccdc.o -obj-$(CONFIG_VIDEO_DM365_ISIF) += vpfe_capture.o isif.o diff --git a/drivers/staging/media/deprecated/vpfe_capture/TODO b/drivers/staging/media/deprecated/vpfe_capture/TODO deleted file mode 100644 index ce654d7337af..000000000000 --- a/drivers/staging/media/deprecated/vpfe_capture/TODO +++ /dev/null @@ -1,7 +0,0 @@ -These are one of the few drivers still not using the vb2 -framework, so these drivers are now deprecated with the intent of -removing them altogether by the beginning of 2023. - -In order to keep these drivers they have to be converted to vb2. -If someone is interested in doing this work, then contact the -linux-media mailinglist (https://linuxtv.org/lists.php). diff --git a/drivers/staging/media/deprecated/vpfe_capture/ccdc_hw_device.h b/drivers/staging/media/deprecated/vpfe_capture/ccdc_hw_device.h deleted file mode 100644 index a545052a95a9..000000000000 --- a/drivers/staging/media/deprecated/vpfe_capture/ccdc_hw_device.h +++ /dev/null @@ -1,80 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-or-later */ -/* - * Copyright (C) 2008-2009 Texas Instruments Inc - * - * ccdc device API - */ -#ifndef _CCDC_HW_DEVICE_H -#define _CCDC_HW_DEVICE_H - -#ifdef __KERNEL__ -#include -#include -#include -#include - -/* - * ccdc hw operations - */ -struct ccdc_hw_ops { - /* Pointer to initialize function to initialize ccdc device */ - int (*open) (struct device *dev); - /* Pointer to deinitialize function */ - int (*close) (struct device *dev); - /* set ccdc base address */ - void (*set_ccdc_base)(void *base, int size); - /* Pointer to function to enable or disable ccdc */ - void (*enable) (int en); - /* reset sbl. only for 6446 */ - void (*reset) (void); - /* enable output to sdram */ - void (*enable_out_to_sdram) (int en); - /* Pointer to function to set hw parameters */ - int (*set_hw_if_params) (struct vpfe_hw_if_param *param); - /* get interface parameters */ - int (*get_hw_if_params) (struct vpfe_hw_if_param *param); - /* Pointer to function to configure ccdc */ - int (*configure) (void); - - /* Pointer to function to set buffer type */ - int (*set_buftype) (enum ccdc_buftype buf_type); - /* Pointer to function to get buffer type */ - enum ccdc_buftype (*get_buftype) (void); - /* Pointer to function to set frame format */ - int (*set_frame_format) (enum ccdc_frmfmt frm_fmt); - /* Pointer to function to get frame format */ - enum ccdc_frmfmt (*get_frame_format) (void); - /* enumerate hw pix formats */ - int (*enum_pix)(u32 *hw_pix, int i); - /* Pointer to function to set buffer type */ - u32 (*get_pixel_format) (void); - /* Pointer to function to get pixel format. */ - int (*set_pixel_format) (u32 pixfmt); - /* Pointer to function to set image window */ - int (*set_image_window) (struct v4l2_rect *win); - /* Pointer to function to set image window */ - void (*get_image_window) (struct v4l2_rect *win); - /* Pointer to function to get line length */ - unsigned int (*get_line_length) (void); - - /* Pointer to function to set frame buffer address */ - void (*setfbaddr) (unsigned long addr); - /* Pointer to function to get field id */ - int (*getfid) (void); -}; - -struct ccdc_hw_device { - /* ccdc device name */ - char name[32]; - /* module owner */ - struct module *owner; - /* hw ops */ - struct ccdc_hw_ops hw_ops; -}; - -/* Used by CCDC module to register & unregister with vpfe capture driver */ -int vpfe_register_ccdc_device(const struct ccdc_hw_device *dev); -void vpfe_unregister_ccdc_device(const struct ccdc_hw_device *dev); - -#endif -#endif diff --git a/drivers/staging/media/deprecated/vpfe_capture/dm355_ccdc.c b/drivers/staging/media/deprecated/vpfe_capture/dm355_ccdc.c deleted file mode 100644 index da8db53e9498..000000000000 --- a/drivers/staging/media/deprecated/vpfe_capture/dm355_ccdc.c +++ /dev/null @@ -1,934 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/* - * Copyright (C) 2005-2009 Texas Instruments Inc - * - * CCDC hardware module for DM355 - * ------------------------------ - * - * This module is for configuring DM355 CCD controller of VPFE to capture - * Raw yuv or Bayer RGB data from a decoder. CCDC has several modules - * such as Defect Pixel Correction, Color Space Conversion etc to - * pre-process the Bayer RGB data, before writing it to SDRAM. - * - * TODO: 1) Raw bayer parameter settings and bayer capture - * 2) Split module parameter structure to module specific ioctl structs - * 3) add support for lense shading correction - * 4) investigate if enum used for user space type definition - * to be replaced by #defines or integer - */ -#include -#include -#include -#include -#include - -#include "dm355_ccdc.h" -#include - -#include "dm355_ccdc_regs.h" -#include "ccdc_hw_device.h" - -MODULE_LICENSE("GPL"); -MODULE_DESCRIPTION("CCDC Driver for DM355"); -MODULE_AUTHOR("Texas Instruments"); - -static struct ccdc_oper_config { - struct device *dev; - /* CCDC interface type */ - enum vpfe_hw_if_type if_type; - /* Raw Bayer configuration */ - struct ccdc_params_raw bayer; - /* YCbCr configuration */ - struct ccdc_params_ycbcr ycbcr; - /* ccdc base address */ - void __iomem *base_addr; -} ccdc_cfg = { - /* Raw configurations */ - .bayer = { - .pix_fmt = CCDC_PIXFMT_RAW, - .frm_fmt = CCDC_FRMFMT_PROGRESSIVE, - .win = CCDC_WIN_VGA, - .fid_pol = VPFE_PINPOL_POSITIVE, - .vd_pol = VPFE_PINPOL_POSITIVE, - .hd_pol = VPFE_PINPOL_POSITIVE, - .gain = { - .r_ye = 256, - .gb_g = 256, - .gr_cy = 256, - .b_mg = 256 - }, - .config_params = { - .datasft = 2, - .mfilt1 = CCDC_NO_MEDIAN_FILTER1, - .mfilt2 = CCDC_NO_MEDIAN_FILTER2, - .alaw = { - .gamma_wd = 2, - }, - .blk_clamp = { - .sample_pixel = 1, - .dc_sub = 25 - }, - .col_pat_field0 = { - .olop = CCDC_GREEN_BLUE, - .olep = CCDC_BLUE, - .elop = CCDC_RED, - .elep = CCDC_GREEN_RED - }, - .col_pat_field1 = { - .olop = CCDC_GREEN_BLUE, - .olep = CCDC_BLUE, - .elop = CCDC_RED, - .elep = CCDC_GREEN_RED - }, - }, - }, - /* YCbCr configuration */ - .ycbcr = { - .win = CCDC_WIN_PAL, - .pix_fmt = CCDC_PIXFMT_YCBCR_8BIT, - .frm_fmt = CCDC_FRMFMT_INTERLACED, - .fid_pol = VPFE_PINPOL_POSITIVE, - .vd_pol = VPFE_PINPOL_POSITIVE, - .hd_pol = VPFE_PINPOL_POSITIVE, - .bt656_enable = 1, - .pix_order = CCDC_PIXORDER_CBYCRY, - .buf_type = CCDC_BUFTYPE_FLD_INTERLEAVED - }, -}; - - -/* Raw Bayer formats */ -static u32 ccdc_raw_bayer_pix_formats[] = - {V4L2_PIX_FMT_SBGGR8, V4L2_PIX_FMT_SBGGR16}; - -/* Raw YUV formats */ -static u32 ccdc_raw_yuv_pix_formats[] = - {V4L2_PIX_FMT_UYVY, V4L2_PIX_FMT_YUYV}; - -/* register access routines */ -static inline u32 regr(u32 offset) -{ - return __raw_readl(ccdc_cfg.base_addr + offset); -} - -static inline void regw(u32 val, u32 offset) -{ - __raw_writel(val, ccdc_cfg.base_addr + offset); -} - -static void ccdc_enable(int en) -{ - unsigned int temp; - temp = regr(SYNCEN); - temp &= (~CCDC_SYNCEN_VDHDEN_MASK); - temp |= (en & CCDC_SYNCEN_VDHDEN_MASK); - regw(temp, SYNCEN); -} - -static void ccdc_enable_output_to_sdram(int en) -{ - unsigned int temp; - temp = regr(SYNCEN); - temp &= (~(CCDC_SYNCEN_WEN_MASK)); - temp |= ((en << CCDC_SYNCEN_WEN_SHIFT) & CCDC_SYNCEN_WEN_MASK); - regw(temp, SYNCEN); -} - -static void ccdc_config_gain_offset(void) -{ - /* configure gain */ - regw(ccdc_cfg.bayer.gain.r_ye, RYEGAIN); - regw(ccdc_cfg.bayer.gain.gr_cy, GRCYGAIN); - regw(ccdc_cfg.bayer.gain.gb_g, GBGGAIN); - regw(ccdc_cfg.bayer.gain.b_mg, BMGGAIN); - /* configure offset */ - regw(ccdc_cfg.bayer.ccdc_offset, OFFSET); -} - -/* - * ccdc_restore_defaults() - * This function restore power on defaults in the ccdc registers - */ -static int ccdc_restore_defaults(void) -{ - int i; - - dev_dbg(ccdc_cfg.dev, "\nstarting ccdc_restore_defaults..."); - /* set all registers to zero */ - for (i = 0; i <= CCDC_REG_LAST; i += 4) - regw(0, i); - - /* now override the values with power on defaults in registers */ - regw(MODESET_DEFAULT, MODESET); - /* no culling support */ - regw(CULH_DEFAULT, CULH); - regw(CULV_DEFAULT, CULV); - /* Set default Gain and Offset */ - ccdc_cfg.bayer.gain.r_ye = GAIN_DEFAULT; - ccdc_cfg.bayer.gain.gb_g = GAIN_DEFAULT; - ccdc_cfg.bayer.gain.gr_cy = GAIN_DEFAULT; - ccdc_cfg.bayer.gain.b_mg = GAIN_DEFAULT; - ccdc_config_gain_offset(); - regw(OUTCLIP_DEFAULT, OUTCLIP); - regw(LSCCFG2_DEFAULT, LSCCFG2); - /* select ccdc input */ - if (vpss_select_ccdc_source(VPSS_CCDCIN)) { - dev_dbg(ccdc_cfg.dev, "\ncouldn't select ccdc input source"); - return -EFAULT; - } - /* select ccdc clock */ - if (vpss_enable_clock(VPSS_CCDC_CLOCK, 1) < 0) { - dev_dbg(ccdc_cfg.dev, "\ncouldn't enable ccdc clock"); - return -EFAULT; - } - dev_dbg(ccdc_cfg.dev, "\nEnd of ccdc_restore_defaults..."); - return 0; -} - -static int ccdc_open(struct device *device) -{ - return ccdc_restore_defaults(); -} - -static int ccdc_close(struct device *device) -{ - /* disable clock */ - vpss_enable_clock(VPSS_CCDC_CLOCK, 0); - /* do nothing for now */ - return 0; -} -/* - * ccdc_setwin() - * This function will configure the window size to - * be capture in CCDC reg. - */ -static void ccdc_setwin(struct v4l2_rect *image_win, - enum ccdc_frmfmt frm_fmt, int ppc) -{ - int horz_start, horz_nr_pixels; - int vert_start, vert_nr_lines; - int mid_img = 0; - - dev_dbg(ccdc_cfg.dev, "\nStarting ccdc_setwin..."); - - /* - * ppc - per pixel count. indicates how many pixels per cell - * output to SDRAM. example, for ycbcr, it is one y and one c, so 2. - * raw capture this is 1 - */ - horz_start = image_win->left << (ppc - 1); - horz_nr_pixels = ((image_win->width) << (ppc - 1)) - 1; - - /* Writing the horizontal info into the registers */ - regw(horz_start, SPH); - regw(horz_nr_pixels, NPH); - vert_start = image_win->top; - - if (frm_fmt == CCDC_FRMFMT_INTERLACED) { - vert_nr_lines = (image_win->height >> 1) - 1; - vert_start >>= 1; - /* Since first line doesn't have any data */ - vert_start += 1; - /* configure VDINT0 and VDINT1 */ - regw(vert_start, VDINT0); - } else { - /* Since first line doesn't have any data */ - vert_start += 1; - vert_nr_lines = image_win->height - 1; - /* configure VDINT0 and VDINT1 */ - mid_img = vert_start + (image_win->height / 2); - regw(vert_start, VDINT0); - regw(mid_img, VDINT1); - } - regw(vert_start & CCDC_START_VER_ONE_MASK, SLV0); - regw(vert_start & CCDC_START_VER_TWO_MASK, SLV1); - regw(vert_nr_lines & CCDC_NUM_LINES_VER, NLV); - dev_dbg(ccdc_cfg.dev, "\nEnd of ccdc_setwin..."); -} - -/* This function will configure CCDC for YCbCr video capture */ -static void ccdc_config_ycbcr(void) -{ - struct ccdc_params_ycbcr *params = &ccdc_cfg.ycbcr; - u32 temp; - - /* first set the CCDC power on defaults values in all registers */ - dev_dbg(ccdc_cfg.dev, "\nStarting ccdc_config_ycbcr..."); - ccdc_restore_defaults(); - - /* configure pixel format & video frame format */ - temp = (((params->pix_fmt & CCDC_INPUT_MODE_MASK) << - CCDC_INPUT_MODE_SHIFT) | - ((params->frm_fmt & CCDC_FRM_FMT_MASK) << - CCDC_FRM_FMT_SHIFT)); - - /* setup BT.656 sync mode */ - if (params->bt656_enable) { - regw(CCDC_REC656IF_BT656_EN, REC656IF); - /* - * configure the FID, VD, HD pin polarity fld,hd pol positive, - * vd negative, 8-bit pack mode - */ - temp |= CCDC_VD_POL_NEGATIVE; - } else { /* y/c external sync mode */ - temp |= (((params->fid_pol & CCDC_FID_POL_MASK) << - CCDC_FID_POL_SHIFT) | - ((params->hd_pol & CCDC_HD_POL_MASK) << - CCDC_HD_POL_SHIFT) | - ((params->vd_pol & CCDC_VD_POL_MASK) << - CCDC_VD_POL_SHIFT)); - } - - /* pack the data to 8-bit */ - temp |= CCDC_DATA_PACK_ENABLE; - - regw(temp, MODESET); - - /* configure video window */ - ccdc_setwin(¶ms->win, params->frm_fmt, 2); - - /* configure the order of y cb cr in SD-RAM */ - temp = (params->pix_order << CCDC_Y8POS_SHIFT); - temp |= CCDC_LATCH_ON_VSYNC_DISABLE | CCDC_CCDCFG_FIDMD_NO_LATCH_VSYNC; - regw(temp, CCDCFG); - - /* - * configure the horizontal line offset. This is done by rounding up - * width to a multiple of 16 pixels and multiply by two to account for - * y:cb:cr 4:2:2 data - */ - regw(((params->win.width * 2 + 31) >> 5), HSIZE); - - /* configure the memory line offset */ - if (params->buf_type == CCDC_BUFTYPE_FLD_INTERLEAVED) { - /* two fields are interleaved in memory */ - regw(CCDC_SDOFST_FIELD_INTERLEAVED, SDOFST); - } - - dev_dbg(ccdc_cfg.dev, "\nEnd of ccdc_config_ycbcr...\n"); -} - -/* - * ccdc_config_black_clamp() - * configure parameters for Optical Black Clamp - */ -static void ccdc_config_black_clamp(struct ccdc_black_clamp *bclamp) -{ - u32 val; - - if (!bclamp->b_clamp_enable) { - /* configure DCSub */ - regw(bclamp->dc_sub & CCDC_BLK_DC_SUB_MASK, DCSUB); - regw(0x0000, CLAMP); - return; - } - /* Enable the Black clamping, set sample lines and pixels */ - val = (bclamp->start_pixel & CCDC_BLK_ST_PXL_MASK) | - ((bclamp->sample_pixel & CCDC_BLK_SAMPLE_LN_MASK) << - CCDC_BLK_SAMPLE_LN_SHIFT) | CCDC_BLK_CLAMP_ENABLE; - regw(val, CLAMP); - - /* If Black clamping is enable then make dcsub 0 */ - val = (bclamp->sample_ln & CCDC_NUM_LINE_CALC_MASK) - << CCDC_NUM_LINE_CALC_SHIFT; - regw(val, DCSUB); -} - -/* - * ccdc_config_black_compense() - * configure parameters for Black Compensation - */ -static void ccdc_config_black_compense(struct ccdc_black_compensation *bcomp) -{ - u32 val; - - val = (bcomp->b & CCDC_BLK_COMP_MASK) | - ((bcomp->gb & CCDC_BLK_COMP_MASK) << - CCDC_BLK_COMP_GB_COMP_SHIFT); - regw(val, BLKCMP1); - - val = ((bcomp->gr & CCDC_BLK_COMP_MASK) << - CCDC_BLK_COMP_GR_COMP_SHIFT) | - ((bcomp->r & CCDC_BLK_COMP_MASK) << - CCDC_BLK_COMP_R_COMP_SHIFT); - regw(val, BLKCMP0); -} - -/* - * ccdc_write_dfc_entry() - * write an entry in the dfc table. - */ -static int ccdc_write_dfc_entry(int index, struct ccdc_vertical_dft *dfc) -{ -/* TODO This is to be re-visited and adjusted */ -#define DFC_WRITE_WAIT_COUNT 1000 - u32 val, count = DFC_WRITE_WAIT_COUNT; - - regw(dfc->dft_corr_vert[index], DFCMEM0); - regw(dfc->dft_corr_horz[index], DFCMEM1); - regw(dfc->dft_corr_sub1[index], DFCMEM2); - regw(dfc->dft_corr_sub2[index], DFCMEM3); - regw(dfc->dft_corr_sub3[index], DFCMEM4); - /* set WR bit to write */ - val = regr(DFCMEMCTL) | CCDC_DFCMEMCTL_DFCMWR_MASK; - regw(val, DFCMEMCTL); - - /* - * Assume, it is very short. If we get an error, we need to - * adjust this value - */ - while (regr(DFCMEMCTL) & CCDC_DFCMEMCTL_DFCMWR_MASK) - count--; - /* - * TODO We expect the count to be non-zero to be successful. Adjust - * the count if write requires more time - */ - - if (count) { - dev_err(ccdc_cfg.dev, "defect table write timeout !!!\n"); - return -1; - } - return 0; -} - -/* - * ccdc_config_vdfc() - * configure parameters for Vertical Defect Correction - */ -static int ccdc_config_vdfc(struct ccdc_vertical_dft *dfc) -{ - u32 val; - int i; - - /* Configure General Defect Correction. The table used is from IPIPE */ - val = dfc->gen_dft_en & CCDC_DFCCTL_GDFCEN_MASK; - - /* Configure Vertical Defect Correction if needed */ - if (!dfc->ver_dft_en) { - /* Enable only General Defect Correction */ - regw(val, DFCCTL); - return 0; - } - - if (dfc->table_size > CCDC_DFT_TABLE_SIZE) - return -EINVAL; - - val |= CCDC_DFCCTL_VDFC_DISABLE; - val |= (dfc->dft_corr_ctl.vdfcsl & CCDC_DFCCTL_VDFCSL_MASK) << - CCDC_DFCCTL_VDFCSL_SHIFT; - val |= (dfc->dft_corr_ctl.vdfcuda & CCDC_DFCCTL_VDFCUDA_MASK) << - CCDC_DFCCTL_VDFCUDA_SHIFT; - val |= (dfc->dft_corr_ctl.vdflsft & CCDC_DFCCTL_VDFLSFT_MASK) << - CCDC_DFCCTL_VDFLSFT_SHIFT; - regw(val , DFCCTL); - - /* clear address ptr to offset 0 */ - val = CCDC_DFCMEMCTL_DFCMARST_MASK << CCDC_DFCMEMCTL_DFCMARST_SHIFT; - - /* write defect table entries */ - for (i = 0; i < dfc->table_size; i++) { - /* increment address for non zero index */ - if (i != 0) - val = CCDC_DFCMEMCTL_INC_ADDR; - regw(val, DFCMEMCTL); - if (ccdc_write_dfc_entry(i, dfc) < 0) - return -EFAULT; - } - - /* update saturation level and enable dfc */ - regw(dfc->saturation_ctl & CCDC_VDC_DFCVSAT_MASK, DFCVSAT); - val = regr(DFCCTL) | (CCDC_DFCCTL_VDFCEN_MASK << - CCDC_DFCCTL_VDFCEN_SHIFT); - regw(val, DFCCTL); - return 0; -} - -/* - * ccdc_config_csc() - * configure parameters for color space conversion - * Each register CSCM0-7 has two values in S8Q5 format. - */ -static void ccdc_config_csc(struct ccdc_csc *csc) -{ - u32 val1 = 0, val2; - int i; - - if (!csc->enable) - return; - - /* Enable the CSC sub-module */ - regw(CCDC_CSC_ENABLE, CSCCTL); - - /* Converting the co-eff as per the format of the register */ - for (i = 0; i < CCDC_CSC_COEFF_TABLE_SIZE; i++) { - if ((i % 2) == 0) { - /* CSCM - LSB */ - val1 = (csc->coeff[i].integer & - CCDC_CSC_COEF_INTEG_MASK) - << CCDC_CSC_COEF_INTEG_SHIFT; - /* - * convert decimal part to binary. Use 2 decimal - * precision, user values range from .00 - 0.99 - */ - val1 |= (((csc->coeff[i].decimal & - CCDC_CSC_COEF_DECIMAL_MASK) * - CCDC_CSC_DEC_MAX) / 100); - } else { - - /* CSCM - MSB */ - val2 = (csc->coeff[i].integer & - CCDC_CSC_COEF_INTEG_MASK) - << CCDC_CSC_COEF_INTEG_SHIFT; - val2 |= (((csc->coeff[i].decimal & - CCDC_CSC_COEF_DECIMAL_MASK) * - CCDC_CSC_DEC_MAX) / 100); - val2 <<= CCDC_CSCM_MSB_SHIFT; - val2 |= val1; - regw(val2, (CSCM0 + ((i - 1) << 1))); - } - } -} - -/* - * ccdc_config_color_patterns() - * configure parameters for color patterns - */ -static void ccdc_config_color_patterns(struct ccdc_col_pat *pat0, - struct ccdc_col_pat *pat1) -{ - u32 val; - - val = (pat0->olop | (pat0->olep << 2) | (pat0->elop << 4) | - (pat0->elep << 6) | (pat1->olop << 8) | (pat1->olep << 10) | - (pat1->elop << 12) | (pat1->elep << 14)); - regw(val, COLPTN); -} - -/* This function will configure CCDC for Raw mode image capture */ -static int ccdc_config_raw(void) -{ - struct ccdc_params_raw *params = &ccdc_cfg.bayer; - struct ccdc_config_params_raw *config_params = - &ccdc_cfg.bayer.config_params; - unsigned int val; - - dev_dbg(ccdc_cfg.dev, "\nStarting ccdc_config_raw..."); - - /* restore power on defaults to register */ - ccdc_restore_defaults(); - - /* CCDCFG register: - * set CCD Not to swap input since input is RAW data - * set FID detection function to Latch at V-Sync - * set WENLOG - ccdc valid area to AND - * set TRGSEL to WENBIT - * set EXTRG to DISABLE - * disable latching function on VSYNC - shadowed registers - */ - regw(CCDC_YCINSWP_RAW | CCDC_CCDCFG_FIDMD_LATCH_VSYNC | - CCDC_CCDCFG_WENLOG_AND | CCDC_CCDCFG_TRGSEL_WEN | - CCDC_CCDCFG_EXTRG_DISABLE | CCDC_LATCH_ON_VSYNC_DISABLE, CCDCFG); - - /* - * Set VDHD direction to input, input type to raw input - * normal data polarity, do not use external WEN - */ - val = (CCDC_VDHDOUT_INPUT | CCDC_RAW_IP_MODE | CCDC_DATAPOL_NORMAL | - CCDC_EXWEN_DISABLE); - - /* - * Configure the vertical sync polarity (MODESET.VDPOL), horizontal - * sync polarity (MODESET.HDPOL), field id polarity (MODESET.FLDPOL), - * frame format(progressive or interlace), & pixel format (Input mode) - */ - val |= (((params->vd_pol & CCDC_VD_POL_MASK) << CCDC_VD_POL_SHIFT) | - ((params->hd_pol & CCDC_HD_POL_MASK) << CCDC_HD_POL_SHIFT) | - ((params->fid_pol & CCDC_FID_POL_MASK) << CCDC_FID_POL_SHIFT) | - ((params->frm_fmt & CCDC_FRM_FMT_MASK) << CCDC_FRM_FMT_SHIFT) | - ((params->pix_fmt & CCDC_PIX_FMT_MASK) << CCDC_PIX_FMT_SHIFT)); - - /* set pack for alaw compression */ - if ((config_params->data_sz == CCDC_DATA_8BITS) || - config_params->alaw.enable) - val |= CCDC_DATA_PACK_ENABLE; - - /* Configure for LPF */ - if (config_params->lpf_enable) - val |= (config_params->lpf_enable & CCDC_LPF_MASK) << - CCDC_LPF_SHIFT; - - /* Configure the data shift */ - val |= (config_params->datasft & CCDC_DATASFT_MASK) << - CCDC_DATASFT_SHIFT; - regw(val , MODESET); - dev_dbg(ccdc_cfg.dev, "\nWriting 0x%x to MODESET...\n", val); - - /* Configure the Median Filter threshold */ - regw((config_params->med_filt_thres) & CCDC_MED_FILT_THRESH, MEDFILT); - - /* Configure GAMMAWD register. defaur 11-2, and Mosaic cfa pattern */ - val = CCDC_GAMMA_BITS_11_2 << CCDC_GAMMAWD_INPUT_SHIFT | - CCDC_CFA_MOSAIC; - - /* Enable and configure aLaw register if needed */ - if (config_params->alaw.enable) { - val |= (CCDC_ALAW_ENABLE | - ((config_params->alaw.gamma_wd & - CCDC_ALAW_GAMMA_WD_MASK) << - CCDC_GAMMAWD_INPUT_SHIFT)); - } - - /* Configure Median filter1 & filter2 */ - val |= ((config_params->mfilt1 << CCDC_MFILT1_SHIFT) | - (config_params->mfilt2 << CCDC_MFILT2_SHIFT)); - - regw(val, GAMMAWD); - dev_dbg(ccdc_cfg.dev, "\nWriting 0x%x to GAMMAWD...\n", val); - - /* configure video window */ - ccdc_setwin(¶ms->win, params->frm_fmt, 1); - - /* Optical Clamp Averaging */ - ccdc_config_black_clamp(&config_params->blk_clamp); - - /* Black level compensation */ - ccdc_config_black_compense(&config_params->blk_comp); - - /* Vertical Defect Correction if needed */ - if (ccdc_config_vdfc(&config_params->vertical_dft) < 0) - return -EFAULT; - - /* color space conversion */ - ccdc_config_csc(&config_params->csc); - - /* color pattern */ - ccdc_config_color_patterns(&config_params->col_pat_field0, - &config_params->col_pat_field1); - - /* Configure the Gain & offset control */ - ccdc_config_gain_offset(); - - dev_dbg(ccdc_cfg.dev, "\nWriting %x to COLPTN...\n", val); - - /* Configure DATAOFST register */ - val = (config_params->data_offset.horz_offset & CCDC_DATAOFST_MASK) << - CCDC_DATAOFST_H_SHIFT; - val |= (config_params->data_offset.vert_offset & CCDC_DATAOFST_MASK) << - CCDC_DATAOFST_V_SHIFT; - regw(val, DATAOFST); - - /* configuring HSIZE register */ - val = (params->horz_flip_enable & CCDC_HSIZE_FLIP_MASK) << - CCDC_HSIZE_FLIP_SHIFT; - - /* If pack 8 is enable then 1 pixel will take 1 byte */ - if ((config_params->data_sz == CCDC_DATA_8BITS) || - config_params->alaw.enable) { - val |= (((params->win.width) + 31) >> 5) & - CCDC_HSIZE_VAL_MASK; - - /* adjust to multiple of 32 */ - dev_dbg(ccdc_cfg.dev, "\nWriting 0x%x to HSIZE...\n", - (((params->win.width) + 31) >> 5) & - CCDC_HSIZE_VAL_MASK); - } else { - /* else one pixel will take 2 byte */ - val |= (((params->win.width * 2) + 31) >> 5) & - CCDC_HSIZE_VAL_MASK; - - dev_dbg(ccdc_cfg.dev, "\nWriting 0x%x to HSIZE...\n", - (((params->win.width * 2) + 31) >> 5) & - CCDC_HSIZE_VAL_MASK); - } - regw(val, HSIZE); - - /* Configure SDOFST register */ - if (params->frm_fmt == CCDC_FRMFMT_INTERLACED) { - if (params->image_invert_enable) { - /* For interlace inverse mode */ - regw(CCDC_SDOFST_INTERLACE_INVERSE, SDOFST); - dev_dbg(ccdc_cfg.dev, "\nWriting %x to SDOFST...\n", - CCDC_SDOFST_INTERLACE_INVERSE); - } else { - /* For interlace non inverse mode */ - regw(CCDC_SDOFST_INTERLACE_NORMAL, SDOFST); - dev_dbg(ccdc_cfg.dev, "\nWriting %x to SDOFST...\n", - CCDC_SDOFST_INTERLACE_NORMAL); - } - } else if (params->frm_fmt == CCDC_FRMFMT_PROGRESSIVE) { - if (params->image_invert_enable) { - /* For progessive inverse mode */ - regw(CCDC_SDOFST_PROGRESSIVE_INVERSE, SDOFST); - dev_dbg(ccdc_cfg.dev, "\nWriting %x to SDOFST...\n", - CCDC_SDOFST_PROGRESSIVE_INVERSE); - } else { - /* For progessive non inverse mode */ - regw(CCDC_SDOFST_PROGRESSIVE_NORMAL, SDOFST); - dev_dbg(ccdc_cfg.dev, "\nWriting %x to SDOFST...\n", - CCDC_SDOFST_PROGRESSIVE_NORMAL); - } - } - dev_dbg(ccdc_cfg.dev, "\nend of ccdc_config_raw..."); - return 0; -} - -static int ccdc_configure(void) -{ - if (ccdc_cfg.if_type == VPFE_RAW_BAYER) - return ccdc_config_raw(); - else - ccdc_config_ycbcr(); - return 0; -} - -static int ccdc_set_buftype(enum ccdc_buftype buf_type) -{ - if (ccdc_cfg.if_type == VPFE_RAW_BAYER) - ccdc_cfg.bayer.buf_type = buf_type; - else - ccdc_cfg.ycbcr.buf_type = buf_type; - return 0; -} -static enum ccdc_buftype ccdc_get_buftype(void) -{ - if (ccdc_cfg.if_type == VPFE_RAW_BAYER) - return ccdc_cfg.bayer.buf_type; - return ccdc_cfg.ycbcr.buf_type; -} - -static int ccdc_enum_pix(u32 *pix, int i) -{ - int ret = -EINVAL; - if (ccdc_cfg.if_type == VPFE_RAW_BAYER) { - if (i < ARRAY_SIZE(ccdc_raw_bayer_pix_formats)) { - *pix = ccdc_raw_bayer_pix_formats[i]; - ret = 0; - } - } else { - if (i < ARRAY_SIZE(ccdc_raw_yuv_pix_formats)) { - *pix = ccdc_raw_yuv_pix_formats[i]; - ret = 0; - } - } - return ret; -} - -static int ccdc_set_pixel_format(u32 pixfmt) -{ - struct ccdc_a_law *alaw = &ccdc_cfg.bayer.config_params.alaw; - - if (ccdc_cfg.if_type == VPFE_RAW_BAYER) { - ccdc_cfg.bayer.pix_fmt = CCDC_PIXFMT_RAW; - if (pixfmt == V4L2_PIX_FMT_SBGGR8) - alaw->enable = 1; - else if (pixfmt != V4L2_PIX_FMT_SBGGR16) - return -EINVAL; - } else { - if (pixfmt == V4L2_PIX_FMT_YUYV) - ccdc_cfg.ycbcr.pix_order = CCDC_PIXORDER_YCBYCR; - else if (pixfmt == V4L2_PIX_FMT_UYVY) - ccdc_cfg.ycbcr.pix_order = CCDC_PIXORDER_CBYCRY; - else - return -EINVAL; - } - return 0; -} -static u32 ccdc_get_pixel_format(void) -{ - struct ccdc_a_law *alaw = &ccdc_cfg.bayer.config_params.alaw; - u32 pixfmt; - - if (ccdc_cfg.if_type == VPFE_RAW_BAYER) - if (alaw->enable) - pixfmt = V4L2_PIX_FMT_SBGGR8; - else - pixfmt = V4L2_PIX_FMT_SBGGR16; - else { - if (ccdc_cfg.ycbcr.pix_order == CCDC_PIXORDER_YCBYCR) - pixfmt = V4L2_PIX_FMT_YUYV; - else - pixfmt = V4L2_PIX_FMT_UYVY; - } - return pixfmt; -} -static int ccdc_set_image_window(struct v4l2_rect *win) -{ - if (ccdc_cfg.if_type == VPFE_RAW_BAYER) - ccdc_cfg.bayer.win = *win; - else - ccdc_cfg.ycbcr.win = *win; - return 0; -} - -static void ccdc_get_image_window(struct v4l2_rect *win) -{ - if (ccdc_cfg.if_type == VPFE_RAW_BAYER) - *win = ccdc_cfg.bayer.win; - else - *win = ccdc_cfg.ycbcr.win; -} - -static unsigned int ccdc_get_line_length(void) -{ - struct ccdc_config_params_raw *config_params = - &ccdc_cfg.bayer.config_params; - unsigned int len; - - if (ccdc_cfg.if_type == VPFE_RAW_BAYER) { - if ((config_params->alaw.enable) || - (config_params->data_sz == CCDC_DATA_8BITS)) - len = ccdc_cfg.bayer.win.width; - else - len = ccdc_cfg.bayer.win.width * 2; - } else - len = ccdc_cfg.ycbcr.win.width * 2; - return ALIGN(len, 32); -} - -static int ccdc_set_frame_format(enum ccdc_frmfmt frm_fmt) -{ - if (ccdc_cfg.if_type == VPFE_RAW_BAYER) - ccdc_cfg.bayer.frm_fmt = frm_fmt; - else - ccdc_cfg.ycbcr.frm_fmt = frm_fmt; - return 0; -} - -static enum ccdc_frmfmt ccdc_get_frame_format(void) -{ - if (ccdc_cfg.if_type == VPFE_RAW_BAYER) - return ccdc_cfg.bayer.frm_fmt; - else - return ccdc_cfg.ycbcr.frm_fmt; -} - -static int ccdc_getfid(void) -{ - return (regr(MODESET) >> 15) & 1; -} - -/* misc operations */ -static inline void ccdc_setfbaddr(unsigned long addr) -{ - regw((addr >> 21) & 0x007f, STADRH); - regw((addr >> 5) & 0x0ffff, STADRL); -} - -static int ccdc_set_hw_if_params(struct vpfe_hw_if_param *params) -{ - ccdc_cfg.if_type = params->if_type; - - switch (params->if_type) { - case VPFE_BT656: - case VPFE_YCBCR_SYNC_16: - case VPFE_YCBCR_SYNC_8: - ccdc_cfg.ycbcr.vd_pol = params->vdpol; - ccdc_cfg.ycbcr.hd_pol = params->hdpol; - break; - default: - /* TODO add support for raw bayer here */ - return -EINVAL; - } - return 0; -} - -static const struct ccdc_hw_device ccdc_hw_dev = { - .name = "DM355 CCDC", - .owner = THIS_MODULE, - .hw_ops = { - .open = ccdc_open, - .close = ccdc_close, - .enable = ccdc_enable, - .enable_out_to_sdram = ccdc_enable_output_to_sdram, - .set_hw_if_params = ccdc_set_hw_if_params, - .configure = ccdc_configure, - .set_buftype = ccdc_set_buftype, - .get_buftype = ccdc_get_buftype, - .enum_pix = ccdc_enum_pix, - .set_pixel_format = ccdc_set_pixel_format, - .get_pixel_format = ccdc_get_pixel_format, - .set_frame_format = ccdc_set_frame_format, - .get_frame_format = ccdc_get_frame_format, - .set_image_window = ccdc_set_image_window, - .get_image_window = ccdc_get_image_window, - .get_line_length = ccdc_get_line_length, - .setfbaddr = ccdc_setfbaddr, - .getfid = ccdc_getfid, - }, -}; - -static int dm355_ccdc_probe(struct platform_device *pdev) -{ - void (*setup_pinmux)(void); - struct resource *res; - int status = 0; - - /* - * first try to register with vpfe. If not correct platform, then we - * don't have to iomap - */ - status = vpfe_register_ccdc_device(&ccdc_hw_dev); - if (status < 0) - return status; - - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!res) { - status = -ENODEV; - goto fail_nores; - } - - res = request_mem_region(res->start, resource_size(res), res->name); - if (!res) { - status = -EBUSY; - goto fail_nores; - } - - ccdc_cfg.base_addr = ioremap(res->start, resource_size(res)); - if (!ccdc_cfg.base_addr) { - status = -ENOMEM; - goto fail_nomem; - } - - /* Platform data holds setup_pinmux function ptr */ - if (NULL == pdev->dev.platform_data) { - status = -ENODEV; - goto fail_nomap; - } - setup_pinmux = pdev->dev.platform_data; - /* - * setup Mux configuration for ccdc which may be different for - * different SoCs using this CCDC - */ - setup_pinmux(); - ccdc_cfg.dev = &pdev->dev; - printk(KERN_NOTICE "%s is registered with vpfe.\n", ccdc_hw_dev.name); - return 0; -fail_nomap: - iounmap(ccdc_cfg.base_addr); -fail_nomem: - release_mem_region(res->start, resource_size(res)); -fail_nores: - vpfe_unregister_ccdc_device(&ccdc_hw_dev); - return status; -} - -static int dm355_ccdc_remove(struct platform_device *pdev) -{ - struct resource *res; - - iounmap(ccdc_cfg.base_addr); - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - release_mem_region(res->start, resource_size(res)); - vpfe_unregister_ccdc_device(&ccdc_hw_dev); - return 0; -} - -static struct platform_driver dm355_ccdc_driver = { - .driver = { - .name = "dm355_ccdc", - }, - .remove = dm355_ccdc_remove, - .probe = dm355_ccdc_probe, -}; - -module_platform_driver(dm355_ccdc_driver); diff --git a/drivers/staging/media/deprecated/vpfe_capture/dm355_ccdc.h b/drivers/staging/media/deprecated/vpfe_capture/dm355_ccdc.h deleted file mode 100644 index 1f3d00aa46d1..000000000000 --- a/drivers/staging/media/deprecated/vpfe_capture/dm355_ccdc.h +++ /dev/null @@ -1,308 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-or-later */ -/* - * Copyright (C) 2005-2009 Texas Instruments Inc - */ -#ifndef _DM355_CCDC_H -#define _DM355_CCDC_H -#include -#include - -/* enum for No of pixel per line to be avg. in Black Clamping */ -enum ccdc_sample_length { - CCDC_SAMPLE_1PIXELS, - CCDC_SAMPLE_2PIXELS, - CCDC_SAMPLE_4PIXELS, - CCDC_SAMPLE_8PIXELS, - CCDC_SAMPLE_16PIXELS -}; - -/* enum for No of lines in Black Clamping */ -enum ccdc_sample_line { - CCDC_SAMPLE_1LINES, - CCDC_SAMPLE_2LINES, - CCDC_SAMPLE_4LINES, - CCDC_SAMPLE_8LINES, - CCDC_SAMPLE_16LINES -}; - -/* enum for Alaw gamma width */ -enum ccdc_gamma_width { - CCDC_GAMMA_BITS_13_4, - CCDC_GAMMA_BITS_12_3, - CCDC_GAMMA_BITS_11_2, - CCDC_GAMMA_BITS_10_1, - CCDC_GAMMA_BITS_09_0 -}; - -enum ccdc_colpats { - CCDC_RED, - CCDC_GREEN_RED, - CCDC_GREEN_BLUE, - CCDC_BLUE -}; - -struct ccdc_col_pat { - enum ccdc_colpats olop; - enum ccdc_colpats olep; - enum ccdc_colpats elop; - enum ccdc_colpats elep; -}; - -enum ccdc_datasft { - CCDC_DATA_NO_SHIFT, - CCDC_DATA_SHIFT_1BIT, - CCDC_DATA_SHIFT_2BIT, - CCDC_DATA_SHIFT_3BIT, - CCDC_DATA_SHIFT_4BIT, - CCDC_DATA_SHIFT_5BIT, - CCDC_DATA_SHIFT_6BIT -}; - -enum ccdc_data_size { - CCDC_DATA_16BITS, - CCDC_DATA_15BITS, - CCDC_DATA_14BITS, - CCDC_DATA_13BITS, - CCDC_DATA_12BITS, - CCDC_DATA_11BITS, - CCDC_DATA_10BITS, - CCDC_DATA_8BITS -}; -enum ccdc_mfilt1 { - CCDC_NO_MEDIAN_FILTER1, - CCDC_AVERAGE_FILTER1, - CCDC_MEDIAN_FILTER1 -}; - -enum ccdc_mfilt2 { - CCDC_NO_MEDIAN_FILTER2, - CCDC_AVERAGE_FILTER2, - CCDC_MEDIAN_FILTER2 -}; - -/* structure for ALaw */ -struct ccdc_a_law { - /* Enable/disable A-Law */ - unsigned char enable; - /* Gamma Width Input */ - enum ccdc_gamma_width gamma_wd; -}; - -/* structure for Black Clamping */ -struct ccdc_black_clamp { - /* only if bClampEnable is TRUE */ - unsigned char b_clamp_enable; - /* only if bClampEnable is TRUE */ - enum ccdc_sample_length sample_pixel; - /* only if bClampEnable is TRUE */ - enum ccdc_sample_line sample_ln; - /* only if bClampEnable is TRUE */ - unsigned short start_pixel; - /* only if bClampEnable is FALSE */ - unsigned short sgain; - unsigned short dc_sub; -}; - -/* structure for Black Level Compensation */ -struct ccdc_black_compensation { - /* Constant value to subtract from Red component */ - unsigned char r; - /* Constant value to subtract from Gr component */ - unsigned char gr; - /* Constant value to subtract from Blue component */ - unsigned char b; - /* Constant value to subtract from Gb component */ - unsigned char gb; -}; - -struct ccdc_float { - int integer; - unsigned int decimal; -}; - -#define CCDC_CSC_COEFF_TABLE_SIZE 16 -/* structure for color space converter */ -struct ccdc_csc { - unsigned char enable; - /* - * S8Q5. Use 2 decimal precision, user values range from -3.00 to 3.99. - * example - to use 1.03, set integer part as 1, and decimal part as 3 - * to use -1.03, set integer part as -1 and decimal part as 3 - */ - struct ccdc_float coeff[CCDC_CSC_COEFF_TABLE_SIZE]; -}; - -/* Structures for Vertical Defect Correction*/ -enum ccdc_vdf_csl { - CCDC_VDF_NORMAL, - CCDC_VDF_HORZ_INTERPOL_SAT, - CCDC_VDF_HORZ_INTERPOL -}; - -enum ccdc_vdf_cuda { - CCDC_VDF_WHOLE_LINE_CORRECT, - CCDC_VDF_UPPER_DISABLE -}; - -enum ccdc_dfc_mwr { - CCDC_DFC_MWR_WRITE_COMPLETE, - CCDC_DFC_WRITE_REG -}; - -enum ccdc_dfc_mrd { - CCDC_DFC_READ_COMPLETE, - CCDC_DFC_READ_REG -}; - -enum ccdc_dfc_ma_rst { - CCDC_DFC_INCR_ADDR, - CCDC_DFC_CLR_ADDR -}; - -enum ccdc_dfc_mclr { - CCDC_DFC_CLEAR_COMPLETE, - CCDC_DFC_CLEAR -}; - -struct ccdc_dft_corr_ctl { - enum ccdc_vdf_csl vdfcsl; - enum ccdc_vdf_cuda vdfcuda; - unsigned int vdflsft; -}; - -struct ccdc_dft_corr_mem_ctl { - enum ccdc_dfc_mwr dfcmwr; - enum ccdc_dfc_mrd dfcmrd; - enum ccdc_dfc_ma_rst dfcmarst; - enum ccdc_dfc_mclr dfcmclr; -}; - -#define CCDC_DFT_TABLE_SIZE 16 -/* - * Main Structure for vertical defect correction. Vertical defect - * correction can correct up to 16 defects if defects less than 16 - * then pad the rest with 0 - */ -struct ccdc_vertical_dft { - unsigned char ver_dft_en; - unsigned char gen_dft_en; - unsigned int saturation_ctl; - struct ccdc_dft_corr_ctl dft_corr_ctl; - struct ccdc_dft_corr_mem_ctl dft_corr_mem_ctl; - int table_size; - unsigned int dft_corr_horz[CCDC_DFT_TABLE_SIZE]; - unsigned int dft_corr_vert[CCDC_DFT_TABLE_SIZE]; - unsigned int dft_corr_sub1[CCDC_DFT_TABLE_SIZE]; - unsigned int dft_corr_sub2[CCDC_DFT_TABLE_SIZE]; - unsigned int dft_corr_sub3[CCDC_DFT_TABLE_SIZE]; -}; - -struct ccdc_data_offset { - unsigned char horz_offset; - unsigned char vert_offset; -}; - -/* - * Structure for CCDC configuration parameters for raw capture mode passed - * by application - */ -struct ccdc_config_params_raw { - /* data shift to be applied before storing */ - enum ccdc_datasft datasft; - /* data size value from 8 to 16 bits */ - enum ccdc_data_size data_sz; - /* median filter for sdram */ - enum ccdc_mfilt1 mfilt1; - enum ccdc_mfilt2 mfilt2; - /* low pass filter enable/disable */ - unsigned char lpf_enable; - /* Threshold of median filter */ - int med_filt_thres; - /* - * horz and vertical data offset. Applicable for defect correction - * and lsc - */ - struct ccdc_data_offset data_offset; - /* Structure for Optional A-Law */ - struct ccdc_a_law alaw; - /* Structure for Optical Black Clamp */ - struct ccdc_black_clamp blk_clamp; - /* Structure for Black Compensation */ - struct ccdc_black_compensation blk_comp; - /* structure for vertical Defect Correction Module Configuration */ - struct ccdc_vertical_dft vertical_dft; - /* structure for color space converter Module Configuration */ - struct ccdc_csc csc; - /* color patters for bayer capture */ - struct ccdc_col_pat col_pat_field0; - struct ccdc_col_pat col_pat_field1; -}; - -#ifdef __KERNEL__ -#include - -#define CCDC_WIN_PAL {0, 0, 720, 576} -#define CCDC_WIN_VGA {0, 0, 640, 480} - -struct ccdc_params_ycbcr { - /* pixel format */ - enum ccdc_pixfmt pix_fmt; - /* progressive or interlaced frame */ - enum ccdc_frmfmt frm_fmt; - /* video window */ - struct v4l2_rect win; - /* field id polarity */ - enum vpfe_pin_pol fid_pol; - /* vertical sync polarity */ - enum vpfe_pin_pol vd_pol; - /* horizontal sync polarity */ - enum vpfe_pin_pol hd_pol; - /* enable BT.656 embedded sync mode */ - int bt656_enable; - /* cb:y:cr:y or y:cb:y:cr in memory */ - enum ccdc_pixorder pix_order; - /* interleaved or separated fields */ - enum ccdc_buftype buf_type; -}; - -/* Gain applied to Raw Bayer data */ -struct ccdc_gain { - unsigned short r_ye; - unsigned short gr_cy; - unsigned short gb_g; - unsigned short b_mg; -}; - -/* Structure for CCDC configuration parameters for raw capture mode */ -struct ccdc_params_raw { - /* pixel format */ - enum ccdc_pixfmt pix_fmt; - /* progressive or interlaced frame */ - enum ccdc_frmfmt frm_fmt; - /* video window */ - struct v4l2_rect win; - /* field id polarity */ - enum vpfe_pin_pol fid_pol; - /* vertical sync polarity */ - enum vpfe_pin_pol vd_pol; - /* horizontal sync polarity */ - enum vpfe_pin_pol hd_pol; - /* interleaved or separated fields */ - enum ccdc_buftype buf_type; - /* Gain values */ - struct ccdc_gain gain; - /* offset */ - unsigned int ccdc_offset; - /* horizontal flip enable */ - unsigned char horz_flip_enable; - /* - * enable to store the image in inverse order in memory - * (bottom to top) - */ - unsigned char image_invert_enable; - /* Configurable part of raw data */ - struct ccdc_config_params_raw config_params; -}; - -#endif -#endif /* DM355_CCDC_H */ diff --git a/drivers/staging/media/deprecated/vpfe_capture/dm355_ccdc_regs.h b/drivers/staging/media/deprecated/vpfe_capture/dm355_ccdc_regs.h deleted file mode 100644 index eb381f075245..000000000000 --- a/drivers/staging/media/deprecated/vpfe_capture/dm355_ccdc_regs.h +++ /dev/null @@ -1,297 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-or-later */ -/* - * Copyright (C) 2005-2009 Texas Instruments Inc - */ -#ifndef _DM355_CCDC_REGS_H -#define _DM355_CCDC_REGS_H - -/**************************************************************************\ -* Register OFFSET Definitions -\**************************************************************************/ -#define SYNCEN 0x00 -#define MODESET 0x04 -#define HDWIDTH 0x08 -#define VDWIDTH 0x0c -#define PPLN 0x10 -#define LPFR 0x14 -#define SPH 0x18 -#define NPH 0x1c -#define SLV0 0x20 -#define SLV1 0x24 -#define NLV 0x28 -#define CULH 0x2c -#define CULV 0x30 -#define HSIZE 0x34 -#define SDOFST 0x38 -#define STADRH 0x3c -#define STADRL 0x40 -#define CLAMP 0x44 -#define DCSUB 0x48 -#define COLPTN 0x4c -#define BLKCMP0 0x50 -#define BLKCMP1 0x54 -#define MEDFILT 0x58 -#define RYEGAIN 0x5c -#define GRCYGAIN 0x60 -#define GBGGAIN 0x64 -#define BMGGAIN 0x68 -#define OFFSET 0x6c -#define OUTCLIP 0x70 -#define VDINT0 0x74 -#define VDINT1 0x78 -#define RSV0 0x7c -#define GAMMAWD 0x80 -#define REC656IF 0x84 -#define CCDCFG 0x88 -#define FMTCFG 0x8c -#define FMTPLEN 0x90 -#define FMTSPH 0x94 -#define FMTLNH 0x98 -#define FMTSLV 0x9c -#define FMTLNV 0xa0 -#define FMTRLEN 0xa4 -#define FMTHCNT 0xa8 -#define FMT_ADDR_PTR_B 0xac -#define FMT_ADDR_PTR(i) (FMT_ADDR_PTR_B + (i * 4)) -#define FMTPGM_VF0 0xcc -#define FMTPGM_VF1 0xd0 -#define FMTPGM_AP0 0xd4 -#define FMTPGM_AP1 0xd8 -#define FMTPGM_AP2 0xdc -#define FMTPGM_AP3 0xe0 -#define FMTPGM_AP4 0xe4 -#define FMTPGM_AP5 0xe8 -#define FMTPGM_AP6 0xec -#define FMTPGM_AP7 0xf0 -#define LSCCFG1 0xf4 -#define LSCCFG2 0xf8 -#define LSCH0 0xfc -#define LSCV0 0x100 -#define LSCKH 0x104 -#define LSCKV 0x108 -#define LSCMEMCTL 0x10c -#define LSCMEMD 0x110 -#define LSCMEMQ 0x114 -#define DFCCTL 0x118 -#define DFCVSAT 0x11c -#define DFCMEMCTL 0x120 -#define DFCMEM0 0x124 -#define DFCMEM1 0x128 -#define DFCMEM2 0x12c -#define DFCMEM3 0x130 -#define DFCMEM4 0x134 -#define CSCCTL 0x138 -#define CSCM0 0x13c -#define CSCM1 0x140 -#define CSCM2 0x144 -#define CSCM3 0x148 -#define CSCM4 0x14c -#define CSCM5 0x150 -#define CSCM6 0x154 -#define CSCM7 0x158 -#define DATAOFST 0x15c -#define CCDC_REG_LAST DATAOFST -/************************************************************** -* Define for various register bit mask and shifts for CCDC -* -**************************************************************/ -#define CCDC_RAW_IP_MODE 0 -#define CCDC_VDHDOUT_INPUT 0 -#define CCDC_YCINSWP_RAW (0 << 4) -#define CCDC_EXWEN_DISABLE 0 -#define CCDC_DATAPOL_NORMAL 0 -#define CCDC_CCDCFG_FIDMD_LATCH_VSYNC 0 -#define CCDC_CCDCFG_FIDMD_NO_LATCH_VSYNC (1 << 6) -#define CCDC_CCDCFG_WENLOG_AND 0 -#define CCDC_CCDCFG_TRGSEL_WEN 0 -#define CCDC_CCDCFG_EXTRG_DISABLE 0 -#define CCDC_CFA_MOSAIC 0 -#define CCDC_Y8POS_SHIFT 11 - -#define CCDC_VDC_DFCVSAT_MASK 0x3fff -#define CCDC_DATAOFST_MASK 0x0ff -#define CCDC_DATAOFST_H_SHIFT 0 -#define CCDC_DATAOFST_V_SHIFT 8 -#define CCDC_GAMMAWD_CFA_MASK 1 -#define CCDC_GAMMAWD_CFA_SHIFT 5 -#define CCDC_GAMMAWD_INPUT_SHIFT 2 -#define CCDC_FID_POL_MASK 1 -#define CCDC_FID_POL_SHIFT 4 -#define CCDC_HD_POL_MASK 1 -#define CCDC_HD_POL_SHIFT 3 -#define CCDC_VD_POL_MASK 1 -#define CCDC_VD_POL_SHIFT 2 -#define CCDC_VD_POL_NEGATIVE (1 << 2) -#define CCDC_FRM_FMT_MASK 1 -#define CCDC_FRM_FMT_SHIFT 7 -#define CCDC_DATA_SZ_MASK 7 -#define CCDC_DATA_SZ_SHIFT 8 -#define CCDC_VDHDOUT_MASK 1 -#define CCDC_VDHDOUT_SHIFT 0 -#define CCDC_EXWEN_MASK 1 -#define CCDC_EXWEN_SHIFT 5 -#define CCDC_INPUT_MODE_MASK 3 -#define CCDC_INPUT_MODE_SHIFT 12 -#define CCDC_PIX_FMT_MASK 3 -#define CCDC_PIX_FMT_SHIFT 12 -#define CCDC_DATAPOL_MASK 1 -#define CCDC_DATAPOL_SHIFT 6 -#define CCDC_WEN_ENABLE (1 << 1) -#define CCDC_VDHDEN_ENABLE (1 << 16) -#define CCDC_LPF_ENABLE (1 << 14) -#define CCDC_ALAW_ENABLE 1 -#define CCDC_ALAW_GAMMA_WD_MASK 7 -#define CCDC_REC656IF_BT656_EN 3 - -#define CCDC_FMTCFG_FMTMODE_MASK 3 -#define CCDC_FMTCFG_FMTMODE_SHIFT 1 -#define CCDC_FMTCFG_LNUM_MASK 3 -#define CCDC_FMTCFG_LNUM_SHIFT 4 -#define CCDC_FMTCFG_ADDRINC_MASK 7 -#define CCDC_FMTCFG_ADDRINC_SHIFT 8 - -#define CCDC_CCDCFG_FIDMD_SHIFT 6 -#define CCDC_CCDCFG_WENLOG_SHIFT 8 -#define CCDC_CCDCFG_TRGSEL_SHIFT 9 -#define CCDC_CCDCFG_EXTRG_SHIFT 10 -#define CCDC_CCDCFG_MSBINVI_SHIFT 13 - -#define CCDC_HSIZE_FLIP_SHIFT 12 -#define CCDC_HSIZE_FLIP_MASK 1 -#define CCDC_HSIZE_VAL_MASK 0xFFF -#define CCDC_SDOFST_FIELD_INTERLEAVED 0x249 -#define CCDC_SDOFST_INTERLACE_INVERSE 0x4B6D -#define CCDC_SDOFST_INTERLACE_NORMAL 0x0B6D -#define CCDC_SDOFST_PROGRESSIVE_INVERSE 0x4000 -#define CCDC_SDOFST_PROGRESSIVE_NORMAL 0 -#define CCDC_START_PX_HOR_MASK 0x7FFF -#define CCDC_NUM_PX_HOR_MASK 0x7FFF -#define CCDC_START_VER_ONE_MASK 0x7FFF -#define CCDC_START_VER_TWO_MASK 0x7FFF -#define CCDC_NUM_LINES_VER 0x7FFF - -#define CCDC_BLK_CLAMP_ENABLE (1 << 15) -#define CCDC_BLK_SGAIN_MASK 0x1F -#define CCDC_BLK_ST_PXL_MASK 0x1FFF -#define CCDC_BLK_SAMPLE_LN_MASK 3 -#define CCDC_BLK_SAMPLE_LN_SHIFT 13 - -#define CCDC_NUM_LINE_CALC_MASK 3 -#define CCDC_NUM_LINE_CALC_SHIFT 14 - -#define CCDC_BLK_DC_SUB_MASK 0x3FFF -#define CCDC_BLK_COMP_MASK 0xFF -#define CCDC_BLK_COMP_GB_COMP_SHIFT 8 -#define CCDC_BLK_COMP_GR_COMP_SHIFT 0 -#define CCDC_BLK_COMP_R_COMP_SHIFT 8 -#define CCDC_LATCH_ON_VSYNC_DISABLE (1 << 15) -#define CCDC_LATCH_ON_VSYNC_ENABLE (0 << 15) -#define CCDC_FPC_ENABLE (1 << 15) -#define CCDC_FPC_FPC_NUM_MASK 0x7FFF -#define CCDC_DATA_PACK_ENABLE (1 << 11) -#define CCDC_FMT_HORZ_FMTLNH_MASK 0x1FFF -#define CCDC_FMT_HORZ_FMTSPH_MASK 0x1FFF -#define CCDC_FMT_HORZ_FMTSPH_SHIFT 16 -#define CCDC_FMT_VERT_FMTLNV_MASK 0x1FFF -#define CCDC_FMT_VERT_FMTSLV_MASK 0x1FFF -#define CCDC_FMT_VERT_FMTSLV_SHIFT 16 -#define CCDC_VP_OUT_VERT_NUM_MASK 0x3FFF -#define CCDC_VP_OUT_VERT_NUM_SHIFT 17 -#define CCDC_VP_OUT_HORZ_NUM_MASK 0x1FFF -#define CCDC_VP_OUT_HORZ_NUM_SHIFT 4 -#define CCDC_VP_OUT_HORZ_ST_MASK 0xF - -#define CCDC_CSC_COEF_INTEG_MASK 7 -#define CCDC_CSC_COEF_DECIMAL_MASK 0x1f -#define CCDC_CSC_COEF_INTEG_SHIFT 5 -#define CCDC_CSCM_MSB_SHIFT 8 -#define CCDC_CSC_ENABLE 1 -#define CCDC_CSC_DEC_MAX 32 - -#define CCDC_MFILT1_SHIFT 10 -#define CCDC_MFILT2_SHIFT 8 -#define CCDC_MED_FILT_THRESH 0x3FFF -#define CCDC_LPF_MASK 1 -#define CCDC_LPF_SHIFT 14 -#define CCDC_OFFSET_MASK 0x3FF -#define CCDC_DATASFT_MASK 7 -#define CCDC_DATASFT_SHIFT 8 - -#define CCDC_DF_ENABLE 1 - -#define CCDC_FMTPLEN_P0_MASK 0xF -#define CCDC_FMTPLEN_P1_MASK 0xF -#define CCDC_FMTPLEN_P2_MASK 7 -#define CCDC_FMTPLEN_P3_MASK 7 -#define CCDC_FMTPLEN_P0_SHIFT 0 -#define CCDC_FMTPLEN_P1_SHIFT 4 -#define CCDC_FMTPLEN_P2_SHIFT 8 -#define CCDC_FMTPLEN_P3_SHIFT 12 - -#define CCDC_FMTSPH_MASK 0x1FFF -#define CCDC_FMTLNH_MASK 0x1FFF -#define CCDC_FMTSLV_MASK 0x1FFF -#define CCDC_FMTLNV_MASK 0x7FFF -#define CCDC_FMTRLEN_MASK 0x1FFF -#define CCDC_FMTHCNT_MASK 0x1FFF - -#define CCDC_ADP_INIT_MASK 0x1FFF -#define CCDC_ADP_LINE_SHIFT 13 -#define CCDC_ADP_LINE_MASK 3 -#define CCDC_FMTPGN_APTR_MASK 7 - -#define CCDC_DFCCTL_GDFCEN_MASK 1 -#define CCDC_DFCCTL_VDFCEN_MASK 1 -#define CCDC_DFCCTL_VDFC_DISABLE (0 << 4) -#define CCDC_DFCCTL_VDFCEN_SHIFT 4 -#define CCDC_DFCCTL_VDFCSL_MASK 3 -#define CCDC_DFCCTL_VDFCSL_SHIFT 5 -#define CCDC_DFCCTL_VDFCUDA_MASK 1 -#define CCDC_DFCCTL_VDFCUDA_SHIFT 7 -#define CCDC_DFCCTL_VDFLSFT_MASK 3 -#define CCDC_DFCCTL_VDFLSFT_SHIFT 8 -#define CCDC_DFCMEMCTL_DFCMARST_MASK 1 -#define CCDC_DFCMEMCTL_DFCMARST_SHIFT 2 -#define CCDC_DFCMEMCTL_DFCMWR_MASK 1 -#define CCDC_DFCMEMCTL_DFCMWR_SHIFT 0 -#define CCDC_DFCMEMCTL_INC_ADDR (0 << 2) - -#define CCDC_LSCCFG_GFTSF_MASK 7 -#define CCDC_LSCCFG_GFTSF_SHIFT 1 -#define CCDC_LSCCFG_GFTINV_MASK 0xf -#define CCDC_LSCCFG_GFTINV_SHIFT 4 -#define CCDC_LSC_GFTABLE_SEL_MASK 3 -#define CCDC_LSC_GFTABLE_EPEL_SHIFT 8 -#define CCDC_LSC_GFTABLE_OPEL_SHIFT 10 -#define CCDC_LSC_GFTABLE_EPOL_SHIFT 12 -#define CCDC_LSC_GFTABLE_OPOL_SHIFT 14 -#define CCDC_LSC_GFMODE_MASK 3 -#define CCDC_LSC_GFMODE_SHIFT 4 -#define CCDC_LSC_DISABLE 0 -#define CCDC_LSC_ENABLE 1 -#define CCDC_LSC_TABLE1_SLC 0 -#define CCDC_LSC_TABLE2_SLC 1 -#define CCDC_LSC_TABLE3_SLC 2 -#define CCDC_LSC_MEMADDR_RESET (1 << 2) -#define CCDC_LSC_MEMADDR_INCR (0 << 2) -#define CCDC_LSC_FRAC_MASK_T1 0xFF -#define CCDC_LSC_INT_MASK 3 -#define CCDC_LSC_FRAC_MASK 0x3FFF -#define CCDC_LSC_CENTRE_MASK 0x3FFF -#define CCDC_LSC_COEF_MASK 0xff -#define CCDC_LSC_COEFL_SHIFT 0 -#define CCDC_LSC_COEFU_SHIFT 8 -#define CCDC_GAIN_MASK 0x7FF -#define CCDC_SYNCEN_VDHDEN_MASK (1 << 0) -#define CCDC_SYNCEN_WEN_MASK (1 << 1) -#define CCDC_SYNCEN_WEN_SHIFT 1 - -/* Power on Defaults in hardware */ -#define MODESET_DEFAULT 0x200 -#define CULH_DEFAULT 0xFFFF -#define CULV_DEFAULT 0xFF -#define GAIN_DEFAULT 256 -#define OUTCLIP_DEFAULT 0x3FFF -#define LSCCFG2_DEFAULT 0xE - -#endif diff --git a/drivers/staging/media/deprecated/vpfe_capture/dm644x_ccdc.c b/drivers/staging/media/deprecated/vpfe_capture/dm644x_ccdc.c deleted file mode 100644 index 4a93e5ad6415..000000000000 --- a/drivers/staging/media/deprecated/vpfe_capture/dm644x_ccdc.c +++ /dev/null @@ -1,879 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/* - * Copyright (C) 2006-2009 Texas Instruments Inc - * - * CCDC hardware module for DM6446 - * ------------------------------ - * - * This module is for configuring CCD controller of DM6446 VPFE to capture - * Raw yuv or Bayer RGB data from a decoder. CCDC has several modules - * such as Defect Pixel Correction, Color Space Conversion etc to - * pre-process the Raw Bayer RGB data, before writing it to SDRAM. - * This file is named DM644x so that other variants such DM6443 - * may be supported using the same module. - * - * TODO: Test Raw bayer parameter settings and bayer capture - * Split module parameter structure to module specific ioctl structs - * investigate if enum used for user space type definition - * to be replaced by #defines or integer - */ -#include -#include -#include -#include -#include -#include - -#include "dm644x_ccdc.h" -#include - -#include "dm644x_ccdc_regs.h" -#include "ccdc_hw_device.h" - -MODULE_LICENSE("GPL"); -MODULE_DESCRIPTION("CCDC Driver for DM6446"); -MODULE_AUTHOR("Texas Instruments"); - -static struct ccdc_oper_config { - struct device *dev; - /* CCDC interface type */ - enum vpfe_hw_if_type if_type; - /* Raw Bayer configuration */ - struct ccdc_params_raw bayer; - /* YCbCr configuration */ - struct ccdc_params_ycbcr ycbcr; - /* ccdc base address */ - void __iomem *base_addr; -} ccdc_cfg = { - /* Raw configurations */ - .bayer = { - .pix_fmt = CCDC_PIXFMT_RAW, - .frm_fmt = CCDC_FRMFMT_PROGRESSIVE, - .win = CCDC_WIN_VGA, - .fid_pol = VPFE_PINPOL_POSITIVE, - .vd_pol = VPFE_PINPOL_POSITIVE, - .hd_pol = VPFE_PINPOL_POSITIVE, - .config_params = { - .data_sz = CCDC_DATA_10BITS, - }, - }, - .ycbcr = { - .pix_fmt = CCDC_PIXFMT_YCBCR_8BIT, - .frm_fmt = CCDC_FRMFMT_INTERLACED, - .win = CCDC_WIN_PAL, - .fid_pol = VPFE_PINPOL_POSITIVE, - .vd_pol = VPFE_PINPOL_POSITIVE, - .hd_pol = VPFE_PINPOL_POSITIVE, - .bt656_enable = 1, - .pix_order = CCDC_PIXORDER_CBYCRY, - .buf_type = CCDC_BUFTYPE_FLD_INTERLEAVED - }, -}; - -#define CCDC_MAX_RAW_YUV_FORMATS 2 - -/* Raw Bayer formats */ -static u32 ccdc_raw_bayer_pix_formats[] = - {V4L2_PIX_FMT_SBGGR8, V4L2_PIX_FMT_SBGGR16}; - -/* Raw YUV formats */ -static u32 ccdc_raw_yuv_pix_formats[] = - {V4L2_PIX_FMT_UYVY, V4L2_PIX_FMT_YUYV}; - -/* CCDC Save/Restore context */ -static u32 ccdc_ctx[CCDC_REG_END / sizeof(u32)]; - -/* register access routines */ -static inline u32 regr(u32 offset) -{ - return __raw_readl(ccdc_cfg.base_addr + offset); -} - -static inline void regw(u32 val, u32 offset) -{ - __raw_writel(val, ccdc_cfg.base_addr + offset); -} - -static void ccdc_enable(int flag) -{ - regw(flag, CCDC_PCR); -} - -static void ccdc_enable_vport(int flag) -{ - if (flag) - /* enable video port */ - regw(CCDC_ENABLE_VIDEO_PORT, CCDC_FMTCFG); - else - regw(CCDC_DISABLE_VIDEO_PORT, CCDC_FMTCFG); -} - -/* - * ccdc_setwin() - * This function will configure the window size - * to be capture in CCDC reg - */ -static void ccdc_setwin(struct v4l2_rect *image_win, - enum ccdc_frmfmt frm_fmt, - int ppc) -{ - int horz_start, horz_nr_pixels; - int vert_start, vert_nr_lines; - int val = 0, mid_img = 0; - - dev_dbg(ccdc_cfg.dev, "\nStarting ccdc_setwin..."); - /* - * ppc - per pixel count. indicates how many pixels per cell - * output to SDRAM. example, for ycbcr, it is one y and one c, so 2. - * raw capture this is 1 - */ - horz_start = image_win->left << (ppc - 1); - horz_nr_pixels = (image_win->width << (ppc - 1)) - 1; - regw((horz_start << CCDC_HORZ_INFO_SPH_SHIFT) | horz_nr_pixels, - CCDC_HORZ_INFO); - - vert_start = image_win->top; - - if (frm_fmt == CCDC_FRMFMT_INTERLACED) { - vert_nr_lines = (image_win->height >> 1) - 1; - vert_start >>= 1; - /* Since first line doesn't have any data */ - vert_start += 1; - /* configure VDINT0 */ - val = (vert_start << CCDC_VDINT_VDINT0_SHIFT); - regw(val, CCDC_VDINT); - - } else { - /* Since first line doesn't have any data */ - vert_start += 1; - vert_nr_lines = image_win->height - 1; - /* - * configure VDINT0 and VDINT1. VDINT1 will be at half - * of image height - */ - mid_img = vert_start + (image_win->height / 2); - val = (vert_start << CCDC_VDINT_VDINT0_SHIFT) | - (mid_img & CCDC_VDINT_VDINT1_MASK); - regw(val, CCDC_VDINT); - - } - regw((vert_start << CCDC_VERT_START_SLV0_SHIFT) | vert_start, - CCDC_VERT_START); - regw(vert_nr_lines, CCDC_VERT_LINES); - dev_dbg(ccdc_cfg.dev, "\nEnd of ccdc_setwin..."); -} - -static void ccdc_readregs(void) -{ - unsigned int val = 0; - - val = regr(CCDC_ALAW); - dev_notice(ccdc_cfg.dev, "\nReading 0x%x to ALAW...\n", val); - val = regr(CCDC_CLAMP); - dev_notice(ccdc_cfg.dev, "\nReading 0x%x to CLAMP...\n", val); - val = regr(CCDC_DCSUB); - dev_notice(ccdc_cfg.dev, "\nReading 0x%x to DCSUB...\n", val); - val = regr(CCDC_BLKCMP); - dev_notice(ccdc_cfg.dev, "\nReading 0x%x to BLKCMP...\n", val); - val = regr(CCDC_FPC_ADDR); - dev_notice(ccdc_cfg.dev, "\nReading 0x%x to FPC_ADDR...\n", val); - val = regr(CCDC_FPC); - dev_notice(ccdc_cfg.dev, "\nReading 0x%x to FPC...\n", val); - val = regr(CCDC_FMTCFG); - dev_notice(ccdc_cfg.dev, "\nReading 0x%x to FMTCFG...\n", val); - val = regr(CCDC_COLPTN); - dev_notice(ccdc_cfg.dev, "\nReading 0x%x to COLPTN...\n", val); - val = regr(CCDC_FMT_HORZ); - dev_notice(ccdc_cfg.dev, "\nReading 0x%x to FMT_HORZ...\n", val); - val = regr(CCDC_FMT_VERT); - dev_notice(ccdc_cfg.dev, "\nReading 0x%x to FMT_VERT...\n", val); - val = regr(CCDC_HSIZE_OFF); - dev_notice(ccdc_cfg.dev, "\nReading 0x%x to HSIZE_OFF...\n", val); - val = regr(CCDC_SDOFST); - dev_notice(ccdc_cfg.dev, "\nReading 0x%x to SDOFST...\n", val); - val = regr(CCDC_VP_OUT); - dev_notice(ccdc_cfg.dev, "\nReading 0x%x to VP_OUT...\n", val); - val = regr(CCDC_SYN_MODE); - dev_notice(ccdc_cfg.dev, "\nReading 0x%x to SYN_MODE...\n", val); - val = regr(CCDC_HORZ_INFO); - dev_notice(ccdc_cfg.dev, "\nReading 0x%x to HORZ_INFO...\n", val); - val = regr(CCDC_VERT_START); - dev_notice(ccdc_cfg.dev, "\nReading 0x%x to VERT_START...\n", val); - val = regr(CCDC_VERT_LINES); - dev_notice(ccdc_cfg.dev, "\nReading 0x%x to VERT_LINES...\n", val); -} - -static int ccdc_close(struct device *dev) -{ - return 0; -} - -/* - * ccdc_restore_defaults() - * This function will write defaults to all CCDC registers - */ -static void ccdc_restore_defaults(void) -{ - int i; - - /* disable CCDC */ - ccdc_enable(0); - /* set all registers to default value */ - for (i = 4; i <= 0x94; i += 4) - regw(0, i); - regw(CCDC_NO_CULLING, CCDC_CULLING); - regw(CCDC_GAMMA_BITS_11_2, CCDC_ALAW); -} - -static int ccdc_open(struct device *device) -{ - ccdc_restore_defaults(); - if (ccdc_cfg.if_type == VPFE_RAW_BAYER) - ccdc_enable_vport(1); - return 0; -} - -static void ccdc_sbl_reset(void) -{ - vpss_clear_wbl_overflow(VPSS_PCR_CCDC_WBL_O); -} - -/* - * ccdc_config_ycbcr() - * This function will configure CCDC for YCbCr video capture - */ -static void ccdc_config_ycbcr(void) -{ - struct ccdc_params_ycbcr *params = &ccdc_cfg.ycbcr; - u32 syn_mode; - - dev_dbg(ccdc_cfg.dev, "\nStarting ccdc_config_ycbcr..."); - /* - * first restore the CCDC registers to default values - * This is important since we assume default values to be set in - * a lot of registers that we didn't touch - */ - ccdc_restore_defaults(); - - /* - * configure pixel format, frame format, configure video frame - * format, enable output to SDRAM, enable internal timing generator - * and 8bit pack mode - */ - syn_mode = (((params->pix_fmt & CCDC_SYN_MODE_INPMOD_MASK) << - CCDC_SYN_MODE_INPMOD_SHIFT) | - ((params->frm_fmt & CCDC_SYN_FLDMODE_MASK) << - CCDC_SYN_FLDMODE_SHIFT) | CCDC_VDHDEN_ENABLE | - CCDC_WEN_ENABLE | CCDC_DATA_PACK_ENABLE); - - /* setup BT.656 sync mode */ - if (params->bt656_enable) { - regw(CCDC_REC656IF_BT656_EN, CCDC_REC656IF); - - /* - * configure the FID, VD, HD pin polarity, - * fld,hd pol positive, vd negative, 8-bit data - */ - syn_mode |= CCDC_SYN_MODE_VD_POL_NEGATIVE; - if (ccdc_cfg.if_type == VPFE_BT656_10BIT) - syn_mode |= CCDC_SYN_MODE_10BITS; - else - syn_mode |= CCDC_SYN_MODE_8BITS; - } else { - /* y/c external sync mode */ - syn_mode |= (((params->fid_pol & CCDC_FID_POL_MASK) << - CCDC_FID_POL_SHIFT) | - ((params->hd_pol & CCDC_HD_POL_MASK) << - CCDC_HD_POL_SHIFT) | - ((params->vd_pol & CCDC_VD_POL_MASK) << - CCDC_VD_POL_SHIFT)); - } - regw(syn_mode, CCDC_SYN_MODE); - - /* configure video window */ - ccdc_setwin(¶ms->win, params->frm_fmt, 2); - - /* - * configure the order of y cb cr in SDRAM, and disable latch - * internal register on vsync - */ - if (ccdc_cfg.if_type == VPFE_BT656_10BIT) - regw((params->pix_order << CCDC_CCDCFG_Y8POS_SHIFT) | - CCDC_LATCH_ON_VSYNC_DISABLE | CCDC_CCDCFG_BW656_10BIT, - CCDC_CCDCFG); - else - regw((params->pix_order << CCDC_CCDCFG_Y8POS_SHIFT) | - CCDC_LATCH_ON_VSYNC_DISABLE, CCDC_CCDCFG); - - /* - * configure the horizontal line offset. This should be a - * on 32 byte boundary. So clear LSB 5 bits - */ - regw(((params->win.width * 2 + 31) & ~0x1f), CCDC_HSIZE_OFF); - - /* configure the memory line offset */ - if (params->buf_type == CCDC_BUFTYPE_FLD_INTERLEAVED) - /* two fields are interleaved in memory */ - regw(CCDC_SDOFST_FIELD_INTERLEAVED, CCDC_SDOFST); - - ccdc_sbl_reset(); - dev_dbg(ccdc_cfg.dev, "\nEnd of ccdc_config_ycbcr...\n"); -} - -static void ccdc_config_black_clamp(struct ccdc_black_clamp *bclamp) -{ - u32 val; - - if (!bclamp->enable) { - /* configure DCSub */ - val = (bclamp->dc_sub) & CCDC_BLK_DC_SUB_MASK; - regw(val, CCDC_DCSUB); - dev_dbg(ccdc_cfg.dev, "\nWriting 0x%x to DCSUB...\n", val); - regw(CCDC_CLAMP_DEFAULT_VAL, CCDC_CLAMP); - dev_dbg(ccdc_cfg.dev, "\nWriting 0x0000 to CLAMP...\n"); - return; - } - /* - * Configure gain, Start pixel, No of line to be avg, - * No of pixel/line to be avg, & Enable the Black clamping - */ - val = ((bclamp->sgain & CCDC_BLK_SGAIN_MASK) | - ((bclamp->start_pixel & CCDC_BLK_ST_PXL_MASK) << - CCDC_BLK_ST_PXL_SHIFT) | - ((bclamp->sample_ln & CCDC_BLK_SAMPLE_LINE_MASK) << - CCDC_BLK_SAMPLE_LINE_SHIFT) | - ((bclamp->sample_pixel & CCDC_BLK_SAMPLE_LN_MASK) << - CCDC_BLK_SAMPLE_LN_SHIFT) | CCDC_BLK_CLAMP_ENABLE); - regw(val, CCDC_CLAMP); - dev_dbg(ccdc_cfg.dev, "\nWriting 0x%x to CLAMP...\n", val); - /* If Black clamping is enable then make dcsub 0 */ - regw(CCDC_DCSUB_DEFAULT_VAL, CCDC_DCSUB); - dev_dbg(ccdc_cfg.dev, "\nWriting 0x00000000 to DCSUB...\n"); -} - -static void ccdc_config_black_compense(struct ccdc_black_compensation *bcomp) -{ - u32 val; - - val = ((bcomp->b & CCDC_BLK_COMP_MASK) | - ((bcomp->gb & CCDC_BLK_COMP_MASK) << - CCDC_BLK_COMP_GB_COMP_SHIFT) | - ((bcomp->gr & CCDC_BLK_COMP_MASK) << - CCDC_BLK_COMP_GR_COMP_SHIFT) | - ((bcomp->r & CCDC_BLK_COMP_MASK) << - CCDC_BLK_COMP_R_COMP_SHIFT)); - regw(val, CCDC_BLKCMP); -} - -/* - * ccdc_config_raw() - * This function will configure CCDC for Raw capture mode - */ -static void ccdc_config_raw(void) -{ - struct ccdc_params_raw *params = &ccdc_cfg.bayer; - struct ccdc_config_params_raw *config_params = - &ccdc_cfg.bayer.config_params; - unsigned int syn_mode = 0; - unsigned int val; - - dev_dbg(ccdc_cfg.dev, "\nStarting ccdc_config_raw..."); - - /* Reset CCDC */ - ccdc_restore_defaults(); - - /* Disable latching function registers on VSYNC */ - regw(CCDC_LATCH_ON_VSYNC_DISABLE, CCDC_CCDCFG); - - /* - * Configure the vertical sync polarity(SYN_MODE.VDPOL), - * horizontal sync polarity (SYN_MODE.HDPOL), frame id polarity - * (SYN_MODE.FLDPOL), frame format(progressive or interlace), - * data size(SYNMODE.DATSIZ), &pixel format (Input mode), output - * SDRAM, enable internal timing generator - */ - syn_mode = - (((params->vd_pol & CCDC_VD_POL_MASK) << CCDC_VD_POL_SHIFT) | - ((params->hd_pol & CCDC_HD_POL_MASK) << CCDC_HD_POL_SHIFT) | - ((params->fid_pol & CCDC_FID_POL_MASK) << CCDC_FID_POL_SHIFT) | - ((params->frm_fmt & CCDC_FRM_FMT_MASK) << CCDC_FRM_FMT_SHIFT) | - ((config_params->data_sz & CCDC_DATA_SZ_MASK) << - CCDC_DATA_SZ_SHIFT) | - ((params->pix_fmt & CCDC_PIX_FMT_MASK) << CCDC_PIX_FMT_SHIFT) | - CCDC_WEN_ENABLE | CCDC_VDHDEN_ENABLE); - - /* Enable and configure aLaw register if needed */ - if (config_params->alaw.enable) { - val = ((config_params->alaw.gamma_wd & - CCDC_ALAW_GAMMA_WD_MASK) | CCDC_ALAW_ENABLE); - regw(val, CCDC_ALAW); - dev_dbg(ccdc_cfg.dev, "\nWriting 0x%x to ALAW...\n", val); - } - - /* Configure video window */ - ccdc_setwin(¶ms->win, params->frm_fmt, CCDC_PPC_RAW); - - /* Configure Black Clamp */ - ccdc_config_black_clamp(&config_params->blk_clamp); - - /* Configure Black level compensation */ - ccdc_config_black_compense(&config_params->blk_comp); - - /* If data size is 8 bit then pack the data */ - if ((config_params->data_sz == CCDC_DATA_8BITS) || - config_params->alaw.enable) - syn_mode |= CCDC_DATA_PACK_ENABLE; - - /* disable video port */ - val = CCDC_DISABLE_VIDEO_PORT; - - if (config_params->data_sz == CCDC_DATA_8BITS) - val |= (CCDC_DATA_10BITS & CCDC_FMTCFG_VPIN_MASK) - << CCDC_FMTCFG_VPIN_SHIFT; - else - val |= (config_params->data_sz & CCDC_FMTCFG_VPIN_MASK) - << CCDC_FMTCFG_VPIN_SHIFT; - /* Write value in FMTCFG */ - regw(val, CCDC_FMTCFG); - - dev_dbg(ccdc_cfg.dev, "\nWriting 0x%x to FMTCFG...\n", val); - /* Configure the color pattern according to mt9t001 sensor */ - regw(CCDC_COLPTN_VAL, CCDC_COLPTN); - - dev_dbg(ccdc_cfg.dev, "\nWriting 0xBB11BB11 to COLPTN...\n"); - /* - * Configure Data formatter(Video port) pixel selection - * (FMT_HORZ, FMT_VERT) - */ - val = ((params->win.left & CCDC_FMT_HORZ_FMTSPH_MASK) << - CCDC_FMT_HORZ_FMTSPH_SHIFT) | - (params->win.width & CCDC_FMT_HORZ_FMTLNH_MASK); - regw(val, CCDC_FMT_HORZ); - - dev_dbg(ccdc_cfg.dev, "\nWriting 0x%x to FMT_HORZ...\n", val); - val = (params->win.top & CCDC_FMT_VERT_FMTSLV_MASK) - << CCDC_FMT_VERT_FMTSLV_SHIFT; - if (params->frm_fmt == CCDC_FRMFMT_PROGRESSIVE) - val |= (params->win.height) & CCDC_FMT_VERT_FMTLNV_MASK; - else - val |= (params->win.height >> 1) & CCDC_FMT_VERT_FMTLNV_MASK; - - dev_dbg(ccdc_cfg.dev, "\nparams->win.height 0x%x ...\n", - params->win.height); - regw(val, CCDC_FMT_VERT); - - dev_dbg(ccdc_cfg.dev, "\nWriting 0x%x to FMT_VERT...\n", val); - - dev_dbg(ccdc_cfg.dev, "\nbelow regw(val, FMT_VERT)..."); - - /* - * Configure Horizontal offset register. If pack 8 is enabled then - * 1 pixel will take 1 byte - */ - if ((config_params->data_sz == CCDC_DATA_8BITS) || - config_params->alaw.enable) - regw((params->win.width + CCDC_32BYTE_ALIGN_VAL) & - CCDC_HSIZE_OFF_MASK, CCDC_HSIZE_OFF); - else - /* else one pixel will take 2 byte */ - regw(((params->win.width * CCDC_TWO_BYTES_PER_PIXEL) + - CCDC_32BYTE_ALIGN_VAL) & CCDC_HSIZE_OFF_MASK, - CCDC_HSIZE_OFF); - - /* Set value for SDOFST */ - if (params->frm_fmt == CCDC_FRMFMT_INTERLACED) { - if (params->image_invert_enable) { - /* For intelace inverse mode */ - regw(CCDC_INTERLACED_IMAGE_INVERT, CCDC_SDOFST); - dev_dbg(ccdc_cfg.dev, "\nWriting 0x4B6D to SDOFST..\n"); - } - - else { - /* For intelace non inverse mode */ - regw(CCDC_INTERLACED_NO_IMAGE_INVERT, CCDC_SDOFST); - dev_dbg(ccdc_cfg.dev, "\nWriting 0x0249 to SDOFST..\n"); - } - } else if (params->frm_fmt == CCDC_FRMFMT_PROGRESSIVE) { - regw(CCDC_PROGRESSIVE_NO_IMAGE_INVERT, CCDC_SDOFST); - dev_dbg(ccdc_cfg.dev, "\nWriting 0x0000 to SDOFST...\n"); - } - - /* - * Configure video port pixel selection (VPOUT) - * Here -1 is to make the height value less than FMT_VERT.FMTLNV - */ - if (params->frm_fmt == CCDC_FRMFMT_PROGRESSIVE) - val = (((params->win.height - 1) & CCDC_VP_OUT_VERT_NUM_MASK)) - << CCDC_VP_OUT_VERT_NUM_SHIFT; - else - val = - ((((params->win.height >> CCDC_INTERLACED_HEIGHT_SHIFT) - - 1) & CCDC_VP_OUT_VERT_NUM_MASK)) << - CCDC_VP_OUT_VERT_NUM_SHIFT; - - val |= ((((params->win.width))) & CCDC_VP_OUT_HORZ_NUM_MASK) - << CCDC_VP_OUT_HORZ_NUM_SHIFT; - val |= (params->win.left) & CCDC_VP_OUT_HORZ_ST_MASK; - regw(val, CCDC_VP_OUT); - - dev_dbg(ccdc_cfg.dev, "\nWriting 0x%x to VP_OUT...\n", val); - regw(syn_mode, CCDC_SYN_MODE); - dev_dbg(ccdc_cfg.dev, "\nWriting 0x%x to SYN_MODE...\n", syn_mode); - - ccdc_sbl_reset(); - dev_dbg(ccdc_cfg.dev, "\nend of ccdc_config_raw..."); - ccdc_readregs(); -} - -static int ccdc_configure(void) -{ - if (ccdc_cfg.if_type == VPFE_RAW_BAYER) - ccdc_config_raw(); - else - ccdc_config_ycbcr(); - return 0; -} - -static int ccdc_set_buftype(enum ccdc_buftype buf_type) -{ - if (ccdc_cfg.if_type == VPFE_RAW_BAYER) - ccdc_cfg.bayer.buf_type = buf_type; - else - ccdc_cfg.ycbcr.buf_type = buf_type; - return 0; -} - -static enum ccdc_buftype ccdc_get_buftype(void) -{ - if (ccdc_cfg.if_type == VPFE_RAW_BAYER) - return ccdc_cfg.bayer.buf_type; - return ccdc_cfg.ycbcr.buf_type; -} - -static int ccdc_enum_pix(u32 *pix, int i) -{ - int ret = -EINVAL; - if (ccdc_cfg.if_type == VPFE_RAW_BAYER) { - if (i < ARRAY_SIZE(ccdc_raw_bayer_pix_formats)) { - *pix = ccdc_raw_bayer_pix_formats[i]; - ret = 0; - } - } else { - if (i < ARRAY_SIZE(ccdc_raw_yuv_pix_formats)) { - *pix = ccdc_raw_yuv_pix_formats[i]; - ret = 0; - } - } - return ret; -} - -static int ccdc_set_pixel_format(u32 pixfmt) -{ - if (ccdc_cfg.if_type == VPFE_RAW_BAYER) { - ccdc_cfg.bayer.pix_fmt = CCDC_PIXFMT_RAW; - if (pixfmt == V4L2_PIX_FMT_SBGGR8) - ccdc_cfg.bayer.config_params.alaw.enable = 1; - else if (pixfmt != V4L2_PIX_FMT_SBGGR16) - return -EINVAL; - } else { - if (pixfmt == V4L2_PIX_FMT_YUYV) - ccdc_cfg.ycbcr.pix_order = CCDC_PIXORDER_YCBYCR; - else if (pixfmt == V4L2_PIX_FMT_UYVY) - ccdc_cfg.ycbcr.pix_order = CCDC_PIXORDER_CBYCRY; - else - return -EINVAL; - } - return 0; -} - -static u32 ccdc_get_pixel_format(void) -{ - struct ccdc_a_law *alaw = &ccdc_cfg.bayer.config_params.alaw; - u32 pixfmt; - - if (ccdc_cfg.if_type == VPFE_RAW_BAYER) - if (alaw->enable) - pixfmt = V4L2_PIX_FMT_SBGGR8; - else - pixfmt = V4L2_PIX_FMT_SBGGR16; - else { - if (ccdc_cfg.ycbcr.pix_order == CCDC_PIXORDER_YCBYCR) - pixfmt = V4L2_PIX_FMT_YUYV; - else - pixfmt = V4L2_PIX_FMT_UYVY; - } - return pixfmt; -} - -static int ccdc_set_image_window(struct v4l2_rect *win) -{ - if (ccdc_cfg.if_type == VPFE_RAW_BAYER) - ccdc_cfg.bayer.win = *win; - else - ccdc_cfg.ycbcr.win = *win; - return 0; -} - -static void ccdc_get_image_window(struct v4l2_rect *win) -{ - if (ccdc_cfg.if_type == VPFE_RAW_BAYER) - *win = ccdc_cfg.bayer.win; - else - *win = ccdc_cfg.ycbcr.win; -} - -static unsigned int ccdc_get_line_length(void) -{ - struct ccdc_config_params_raw *config_params = - &ccdc_cfg.bayer.config_params; - unsigned int len; - - if (ccdc_cfg.if_type == VPFE_RAW_BAYER) { - if ((config_params->alaw.enable) || - (config_params->data_sz == CCDC_DATA_8BITS)) - len = ccdc_cfg.bayer.win.width; - else - len = ccdc_cfg.bayer.win.width * 2; - } else - len = ccdc_cfg.ycbcr.win.width * 2; - return ALIGN(len, 32); -} - -static int ccdc_set_frame_format(enum ccdc_frmfmt frm_fmt) -{ - if (ccdc_cfg.if_type == VPFE_RAW_BAYER) - ccdc_cfg.bayer.frm_fmt = frm_fmt; - else - ccdc_cfg.ycbcr.frm_fmt = frm_fmt; - return 0; -} - -static enum ccdc_frmfmt ccdc_get_frame_format(void) -{ - if (ccdc_cfg.if_type == VPFE_RAW_BAYER) - return ccdc_cfg.bayer.frm_fmt; - else - return ccdc_cfg.ycbcr.frm_fmt; -} - -static int ccdc_getfid(void) -{ - return (regr(CCDC_SYN_MODE) >> 15) & 1; -} - -/* misc operations */ -static inline void ccdc_setfbaddr(unsigned long addr) -{ - regw(addr & 0xffffffe0, CCDC_SDR_ADDR); -} - -static int ccdc_set_hw_if_params(struct vpfe_hw_if_param *params) -{ - ccdc_cfg.if_type = params->if_type; - - switch (params->if_type) { - case VPFE_BT656: - case VPFE_YCBCR_SYNC_16: - case VPFE_YCBCR_SYNC_8: - case VPFE_BT656_10BIT: - ccdc_cfg.ycbcr.vd_pol = params->vdpol; - ccdc_cfg.ycbcr.hd_pol = params->hdpol; - break; - default: - /* TODO add support for raw bayer here */ - return -EINVAL; - } - return 0; -} - -static void ccdc_save_context(void) -{ - ccdc_ctx[CCDC_PCR >> 2] = regr(CCDC_PCR); - ccdc_ctx[CCDC_SYN_MODE >> 2] = regr(CCDC_SYN_MODE); - ccdc_ctx[CCDC_HD_VD_WID >> 2] = regr(CCDC_HD_VD_WID); - ccdc_ctx[CCDC_PIX_LINES >> 2] = regr(CCDC_PIX_LINES); - ccdc_ctx[CCDC_HORZ_INFO >> 2] = regr(CCDC_HORZ_INFO); - ccdc_ctx[CCDC_VERT_START >> 2] = regr(CCDC_VERT_START); - ccdc_ctx[CCDC_VERT_LINES >> 2] = regr(CCDC_VERT_LINES); - ccdc_ctx[CCDC_CULLING >> 2] = regr(CCDC_CULLING); - ccdc_ctx[CCDC_HSIZE_OFF >> 2] = regr(CCDC_HSIZE_OFF); - ccdc_ctx[CCDC_SDOFST >> 2] = regr(CCDC_SDOFST); - ccdc_ctx[CCDC_SDR_ADDR >> 2] = regr(CCDC_SDR_ADDR); - ccdc_ctx[CCDC_CLAMP >> 2] = regr(CCDC_CLAMP); - ccdc_ctx[CCDC_DCSUB >> 2] = regr(CCDC_DCSUB); - ccdc_ctx[CCDC_COLPTN >> 2] = regr(CCDC_COLPTN); - ccdc_ctx[CCDC_BLKCMP >> 2] = regr(CCDC_BLKCMP); - ccdc_ctx[CCDC_FPC >> 2] = regr(CCDC_FPC); - ccdc_ctx[CCDC_FPC_ADDR >> 2] = regr(CCDC_FPC_ADDR); - ccdc_ctx[CCDC_VDINT >> 2] = regr(CCDC_VDINT); - ccdc_ctx[CCDC_ALAW >> 2] = regr(CCDC_ALAW); - ccdc_ctx[CCDC_REC656IF >> 2] = regr(CCDC_REC656IF); - ccdc_ctx[CCDC_CCDCFG >> 2] = regr(CCDC_CCDCFG); - ccdc_ctx[CCDC_FMTCFG >> 2] = regr(CCDC_FMTCFG); - ccdc_ctx[CCDC_FMT_HORZ >> 2] = regr(CCDC_FMT_HORZ); - ccdc_ctx[CCDC_FMT_VERT >> 2] = regr(CCDC_FMT_VERT); - ccdc_ctx[CCDC_FMT_ADDR0 >> 2] = regr(CCDC_FMT_ADDR0); - ccdc_ctx[CCDC_FMT_ADDR1 >> 2] = regr(CCDC_FMT_ADDR1); - ccdc_ctx[CCDC_FMT_ADDR2 >> 2] = regr(CCDC_FMT_ADDR2); - ccdc_ctx[CCDC_FMT_ADDR3 >> 2] = regr(CCDC_FMT_ADDR3); - ccdc_ctx[CCDC_FMT_ADDR4 >> 2] = regr(CCDC_FMT_ADDR4); - ccdc_ctx[CCDC_FMT_ADDR5 >> 2] = regr(CCDC_FMT_ADDR5); - ccdc_ctx[CCDC_FMT_ADDR6 >> 2] = regr(CCDC_FMT_ADDR6); - ccdc_ctx[CCDC_FMT_ADDR7 >> 2] = regr(CCDC_FMT_ADDR7); - ccdc_ctx[CCDC_PRGEVEN_0 >> 2] = regr(CCDC_PRGEVEN_0); - ccdc_ctx[CCDC_PRGEVEN_1 >> 2] = regr(CCDC_PRGEVEN_1); - ccdc_ctx[CCDC_PRGODD_0 >> 2] = regr(CCDC_PRGODD_0); - ccdc_ctx[CCDC_PRGODD_1 >> 2] = regr(CCDC_PRGODD_1); - ccdc_ctx[CCDC_VP_OUT >> 2] = regr(CCDC_VP_OUT); -} - -static void ccdc_restore_context(void) -{ - regw(ccdc_ctx[CCDC_SYN_MODE >> 2], CCDC_SYN_MODE); - regw(ccdc_ctx[CCDC_HD_VD_WID >> 2], CCDC_HD_VD_WID); - regw(ccdc_ctx[CCDC_PIX_LINES >> 2], CCDC_PIX_LINES); - regw(ccdc_ctx[CCDC_HORZ_INFO >> 2], CCDC_HORZ_INFO); - regw(ccdc_ctx[CCDC_VERT_START >> 2], CCDC_VERT_START); - regw(ccdc_ctx[CCDC_VERT_LINES >> 2], CCDC_VERT_LINES); - regw(ccdc_ctx[CCDC_CULLING >> 2], CCDC_CULLING); - regw(ccdc_ctx[CCDC_HSIZE_OFF >> 2], CCDC_HSIZE_OFF); - regw(ccdc_ctx[CCDC_SDOFST >> 2], CCDC_SDOFST); - regw(ccdc_ctx[CCDC_SDR_ADDR >> 2], CCDC_SDR_ADDR); - regw(ccdc_ctx[CCDC_CLAMP >> 2], CCDC_CLAMP); - regw(ccdc_ctx[CCDC_DCSUB >> 2], CCDC_DCSUB); - regw(ccdc_ctx[CCDC_COLPTN >> 2], CCDC_COLPTN); - regw(ccdc_ctx[CCDC_BLKCMP >> 2], CCDC_BLKCMP); - regw(ccdc_ctx[CCDC_FPC >> 2], CCDC_FPC); - regw(ccdc_ctx[CCDC_FPC_ADDR >> 2], CCDC_FPC_ADDR); - regw(ccdc_ctx[CCDC_VDINT >> 2], CCDC_VDINT); - regw(ccdc_ctx[CCDC_ALAW >> 2], CCDC_ALAW); - regw(ccdc_ctx[CCDC_REC656IF >> 2], CCDC_REC656IF); - regw(ccdc_ctx[CCDC_CCDCFG >> 2], CCDC_CCDCFG); - regw(ccdc_ctx[CCDC_FMTCFG >> 2], CCDC_FMTCFG); - regw(ccdc_ctx[CCDC_FMT_HORZ >> 2], CCDC_FMT_HORZ); - regw(ccdc_ctx[CCDC_FMT_VERT >> 2], CCDC_FMT_VERT); - regw(ccdc_ctx[CCDC_FMT_ADDR0 >> 2], CCDC_FMT_ADDR0); - regw(ccdc_ctx[CCDC_FMT_ADDR1 >> 2], CCDC_FMT_ADDR1); - regw(ccdc_ctx[CCDC_FMT_ADDR2 >> 2], CCDC_FMT_ADDR2); - regw(ccdc_ctx[CCDC_FMT_ADDR3 >> 2], CCDC_FMT_ADDR3); - regw(ccdc_ctx[CCDC_FMT_ADDR4 >> 2], CCDC_FMT_ADDR4); - regw(ccdc_ctx[CCDC_FMT_ADDR5 >> 2], CCDC_FMT_ADDR5); - regw(ccdc_ctx[CCDC_FMT_ADDR6 >> 2], CCDC_FMT_ADDR6); - regw(ccdc_ctx[CCDC_FMT_ADDR7 >> 2], CCDC_FMT_ADDR7); - regw(ccdc_ctx[CCDC_PRGEVEN_0 >> 2], CCDC_PRGEVEN_0); - regw(ccdc_ctx[CCDC_PRGEVEN_1 >> 2], CCDC_PRGEVEN_1); - regw(ccdc_ctx[CCDC_PRGODD_0 >> 2], CCDC_PRGODD_0); - regw(ccdc_ctx[CCDC_PRGODD_1 >> 2], CCDC_PRGODD_1); - regw(ccdc_ctx[CCDC_VP_OUT >> 2], CCDC_VP_OUT); - regw(ccdc_ctx[CCDC_PCR >> 2], CCDC_PCR); -} -static const struct ccdc_hw_device ccdc_hw_dev = { - .name = "DM6446 CCDC", - .owner = THIS_MODULE, - .hw_ops = { - .open = ccdc_open, - .close = ccdc_close, - .reset = ccdc_sbl_reset, - .enable = ccdc_enable, - .set_hw_if_params = ccdc_set_hw_if_params, - .configure = ccdc_configure, - .set_buftype = ccdc_set_buftype, - .get_buftype = ccdc_get_buftype, - .enum_pix = ccdc_enum_pix, - .set_pixel_format = ccdc_set_pixel_format, - .get_pixel_format = ccdc_get_pixel_format, - .set_frame_format = ccdc_set_frame_format, - .get_frame_format = ccdc_get_frame_format, - .set_image_window = ccdc_set_image_window, - .get_image_window = ccdc_get_image_window, - .get_line_length = ccdc_get_line_length, - .setfbaddr = ccdc_setfbaddr, - .getfid = ccdc_getfid, - }, -}; - -static int dm644x_ccdc_probe(struct platform_device *pdev) -{ - struct resource *res; - int status = 0; - - /* - * first try to register with vpfe. If not correct platform, then we - * don't have to iomap - */ - status = vpfe_register_ccdc_device(&ccdc_hw_dev); - if (status < 0) - return status; - - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!res) { - status = -ENODEV; - goto fail_nores; - } - - res = request_mem_region(res->start, resource_size(res), res->name); - if (!res) { - status = -EBUSY; - goto fail_nores; - } - - ccdc_cfg.base_addr = ioremap(res->start, resource_size(res)); - if (!ccdc_cfg.base_addr) { - status = -ENOMEM; - goto fail_nomem; - } - - ccdc_cfg.dev = &pdev->dev; - printk(KERN_NOTICE "%s is registered with vpfe.\n", ccdc_hw_dev.name); - return 0; -fail_nomem: - release_mem_region(res->start, resource_size(res)); -fail_nores: - vpfe_unregister_ccdc_device(&ccdc_hw_dev); - return status; -} - -static int dm644x_ccdc_remove(struct platform_device *pdev) -{ - struct resource *res; - - iounmap(ccdc_cfg.base_addr); - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - release_mem_region(res->start, resource_size(res)); - vpfe_unregister_ccdc_device(&ccdc_hw_dev); - return 0; -} - -static int dm644x_ccdc_suspend(struct device *dev) -{ - /* Save CCDC context */ - ccdc_save_context(); - /* Disable CCDC */ - ccdc_enable(0); - - return 0; -} - -static int dm644x_ccdc_resume(struct device *dev) -{ - /* Restore CCDC context */ - ccdc_restore_context(); - - return 0; -} - -static const struct dev_pm_ops dm644x_ccdc_pm_ops = { - .suspend = dm644x_ccdc_suspend, - .resume = dm644x_ccdc_resume, -}; - -static struct platform_driver dm644x_ccdc_driver = { - .driver = { - .name = "dm644x_ccdc", - .pm = &dm644x_ccdc_pm_ops, - }, - .remove = dm644x_ccdc_remove, - .probe = dm644x_ccdc_probe, -}; - -module_platform_driver(dm644x_ccdc_driver); diff --git a/drivers/staging/media/deprecated/vpfe_capture/dm644x_ccdc.h b/drivers/staging/media/deprecated/vpfe_capture/dm644x_ccdc.h deleted file mode 100644 index c20dba3d76d6..000000000000 --- a/drivers/staging/media/deprecated/vpfe_capture/dm644x_ccdc.h +++ /dev/null @@ -1,171 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-or-later */ -/* - * Copyright (C) 2006-2009 Texas Instruments Inc - */ -#ifndef _DM644X_CCDC_H -#define _DM644X_CCDC_H -#include -#include - -/* enum for No of pixel per line to be avg. in Black Clamping*/ -enum ccdc_sample_length { - CCDC_SAMPLE_1PIXELS, - CCDC_SAMPLE_2PIXELS, - CCDC_SAMPLE_4PIXELS, - CCDC_SAMPLE_8PIXELS, - CCDC_SAMPLE_16PIXELS -}; - -/* enum for No of lines in Black Clamping */ -enum ccdc_sample_line { - CCDC_SAMPLE_1LINES, - CCDC_SAMPLE_2LINES, - CCDC_SAMPLE_4LINES, - CCDC_SAMPLE_8LINES, - CCDC_SAMPLE_16LINES -}; - -/* enum for Alaw gamma width */ -enum ccdc_gamma_width { - CCDC_GAMMA_BITS_15_6, /* use bits 15-6 for gamma */ - CCDC_GAMMA_BITS_14_5, - CCDC_GAMMA_BITS_13_4, - CCDC_GAMMA_BITS_12_3, - CCDC_GAMMA_BITS_11_2, - CCDC_GAMMA_BITS_10_1, - CCDC_GAMMA_BITS_09_0 /* use bits 9-0 for gamma */ -}; - -/* returns the highest bit used for the gamma */ -static inline u8 ccdc_gamma_width_max_bit(enum ccdc_gamma_width width) -{ - return 15 - width; -} - -enum ccdc_data_size { - CCDC_DATA_16BITS, - CCDC_DATA_15BITS, - CCDC_DATA_14BITS, - CCDC_DATA_13BITS, - CCDC_DATA_12BITS, - CCDC_DATA_11BITS, - CCDC_DATA_10BITS, - CCDC_DATA_8BITS -}; - -/* returns the highest bit used for this data size */ -static inline u8 ccdc_data_size_max_bit(enum ccdc_data_size sz) -{ - return sz == CCDC_DATA_8BITS ? 7 : 15 - sz; -} - -/* structure for ALaw */ -struct ccdc_a_law { - /* Enable/disable A-Law */ - unsigned char enable; - /* Gamma Width Input */ - enum ccdc_gamma_width gamma_wd; -}; - -/* structure for Black Clamping */ -struct ccdc_black_clamp { - unsigned char enable; - /* only if bClampEnable is TRUE */ - enum ccdc_sample_length sample_pixel; - /* only if bClampEnable is TRUE */ - enum ccdc_sample_line sample_ln; - /* only if bClampEnable is TRUE */ - unsigned short start_pixel; - /* only if bClampEnable is TRUE */ - unsigned short sgain; - /* only if bClampEnable is FALSE */ - unsigned short dc_sub; -}; - -/* structure for Black Level Compensation */ -struct ccdc_black_compensation { - /* Constant value to subtract from Red component */ - char r; - /* Constant value to subtract from Gr component */ - char gr; - /* Constant value to subtract from Blue component */ - char b; - /* Constant value to subtract from Gb component */ - char gb; -}; - -/* Structure for CCDC configuration parameters for raw capture mode passed - * by application - */ -struct ccdc_config_params_raw { - /* data size value from 8 to 16 bits */ - enum ccdc_data_size data_sz; - /* Structure for Optional A-Law */ - struct ccdc_a_law alaw; - /* Structure for Optical Black Clamp */ - struct ccdc_black_clamp blk_clamp; - /* Structure for Black Compensation */ - struct ccdc_black_compensation blk_comp; -}; - - -#ifdef __KERNEL__ -#include -/* Define to enable/disable video port */ -#define FP_NUM_BYTES 4 -/* Define for extra pixel/line and extra lines/frame */ -#define NUM_EXTRAPIXELS 8 -#define NUM_EXTRALINES 8 - -/* settings for commonly used video formats */ -#define CCDC_WIN_PAL {0, 0, 720, 576} -/* ntsc square pixel */ -#define CCDC_WIN_VGA {0, 0, (640 + NUM_EXTRAPIXELS), (480 + NUM_EXTRALINES)} - -/* Structure for CCDC configuration parameters for raw capture mode */ -struct ccdc_params_raw { - /* pixel format */ - enum ccdc_pixfmt pix_fmt; - /* progressive or interlaced frame */ - enum ccdc_frmfmt frm_fmt; - /* video window */ - struct v4l2_rect win; - /* field id polarity */ - enum vpfe_pin_pol fid_pol; - /* vertical sync polarity */ - enum vpfe_pin_pol vd_pol; - /* horizontal sync polarity */ - enum vpfe_pin_pol hd_pol; - /* interleaved or separated fields */ - enum ccdc_buftype buf_type; - /* - * enable to store the image in inverse - * order in memory(bottom to top) - */ - unsigned char image_invert_enable; - /* configurable parameters */ - struct ccdc_config_params_raw config_params; -}; - -struct ccdc_params_ycbcr { - /* pixel format */ - enum ccdc_pixfmt pix_fmt; - /* progressive or interlaced frame */ - enum ccdc_frmfmt frm_fmt; - /* video window */ - struct v4l2_rect win; - /* field id polarity */ - enum vpfe_pin_pol fid_pol; - /* vertical sync polarity */ - enum vpfe_pin_pol vd_pol; - /* horizontal sync polarity */ - enum vpfe_pin_pol hd_pol; - /* enable BT.656 embedded sync mode */ - int bt656_enable; - /* cb:y:cr:y or y:cb:y:cr in memory */ - enum ccdc_pixorder pix_order; - /* interleaved or separated fields */ - enum ccdc_buftype buf_type; -}; -#endif -#endif /* _DM644X_CCDC_H */ diff --git a/drivers/staging/media/deprecated/vpfe_capture/dm644x_ccdc_regs.h b/drivers/staging/media/deprecated/vpfe_capture/dm644x_ccdc_regs.h deleted file mode 100644 index c4894f6a254e..000000000000 --- a/drivers/staging/media/deprecated/vpfe_capture/dm644x_ccdc_regs.h +++ /dev/null @@ -1,140 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-or-later */ -/* - * Copyright (C) 2006-2009 Texas Instruments Inc - */ -#ifndef _DM644X_CCDC_REGS_H -#define _DM644X_CCDC_REGS_H - -/**************************************************************************\ -* Register OFFSET Definitions -\**************************************************************************/ -#define CCDC_PID 0x0 -#define CCDC_PCR 0x4 -#define CCDC_SYN_MODE 0x8 -#define CCDC_HD_VD_WID 0xc -#define CCDC_PIX_LINES 0x10 -#define CCDC_HORZ_INFO 0x14 -#define CCDC_VERT_START 0x18 -#define CCDC_VERT_LINES 0x1c -#define CCDC_CULLING 0x20 -#define CCDC_HSIZE_OFF 0x24 -#define CCDC_SDOFST 0x28 -#define CCDC_SDR_ADDR 0x2c -#define CCDC_CLAMP 0x30 -#define CCDC_DCSUB 0x34 -#define CCDC_COLPTN 0x38 -#define CCDC_BLKCMP 0x3c -#define CCDC_FPC 0x40 -#define CCDC_FPC_ADDR 0x44 -#define CCDC_VDINT 0x48 -#define CCDC_ALAW 0x4c -#define CCDC_REC656IF 0x50 -#define CCDC_CCDCFG 0x54 -#define CCDC_FMTCFG 0x58 -#define CCDC_FMT_HORZ 0x5c -#define CCDC_FMT_VERT 0x60 -#define CCDC_FMT_ADDR0 0x64 -#define CCDC_FMT_ADDR1 0x68 -#define CCDC_FMT_ADDR2 0x6c -#define CCDC_FMT_ADDR3 0x70 -#define CCDC_FMT_ADDR4 0x74 -#define CCDC_FMT_ADDR5 0x78 -#define CCDC_FMT_ADDR6 0x7c -#define CCDC_FMT_ADDR7 0x80 -#define CCDC_PRGEVEN_0 0x84 -#define CCDC_PRGEVEN_1 0x88 -#define CCDC_PRGODD_0 0x8c -#define CCDC_PRGODD_1 0x90 -#define CCDC_VP_OUT 0x94 -#define CCDC_REG_END 0x98 - -/*************************************************************** -* Define for various register bit mask and shifts for CCDC -****************************************************************/ -#define CCDC_FID_POL_MASK 1 -#define CCDC_FID_POL_SHIFT 4 -#define CCDC_HD_POL_MASK 1 -#define CCDC_HD_POL_SHIFT 3 -#define CCDC_VD_POL_MASK 1 -#define CCDC_VD_POL_SHIFT 2 -#define CCDC_HSIZE_OFF_MASK 0xffffffe0 -#define CCDC_32BYTE_ALIGN_VAL 31 -#define CCDC_FRM_FMT_MASK 0x1 -#define CCDC_FRM_FMT_SHIFT 7 -#define CCDC_DATA_SZ_MASK 7 -#define CCDC_DATA_SZ_SHIFT 8 -#define CCDC_PIX_FMT_MASK 3 -#define CCDC_PIX_FMT_SHIFT 12 -#define CCDC_VP2SDR_DISABLE 0xFFFBFFFF -#define CCDC_WEN_ENABLE BIT(17) -#define CCDC_SDR2RSZ_DISABLE 0xFFF7FFFF -#define CCDC_VDHDEN_ENABLE BIT(16) -#define CCDC_LPF_ENABLE BIT(14) -#define CCDC_ALAW_ENABLE BIT(3) -#define CCDC_ALAW_GAMMA_WD_MASK 7 -#define CCDC_BLK_CLAMP_ENABLE BIT(31) -#define CCDC_BLK_SGAIN_MASK 0x1F -#define CCDC_BLK_ST_PXL_MASK 0x7FFF -#define CCDC_BLK_ST_PXL_SHIFT 10 -#define CCDC_BLK_SAMPLE_LN_MASK 7 -#define CCDC_BLK_SAMPLE_LN_SHIFT 28 -#define CCDC_BLK_SAMPLE_LINE_MASK 7 -#define CCDC_BLK_SAMPLE_LINE_SHIFT 25 -#define CCDC_BLK_DC_SUB_MASK 0x03FFF -#define CCDC_BLK_COMP_MASK 0xFF -#define CCDC_BLK_COMP_GB_COMP_SHIFT 8 -#define CCDC_BLK_COMP_GR_COMP_SHIFT 16 -#define CCDC_BLK_COMP_R_COMP_SHIFT 24 -#define CCDC_LATCH_ON_VSYNC_DISABLE BIT(15) -#define CCDC_FPC_ENABLE BIT(15) -#define CCDC_FPC_DISABLE 0 -#define CCDC_FPC_FPC_NUM_MASK 0x7FFF -#define CCDC_DATA_PACK_ENABLE BIT(11) -#define CCDC_FMTCFG_VPIN_MASK 7 -#define CCDC_FMTCFG_VPIN_SHIFT 12 -#define CCDC_FMT_HORZ_FMTLNH_MASK 0x1FFF -#define CCDC_FMT_HORZ_FMTSPH_MASK 0x1FFF -#define CCDC_FMT_HORZ_FMTSPH_SHIFT 16 -#define CCDC_FMT_VERT_FMTLNV_MASK 0x1FFF -#define CCDC_FMT_VERT_FMTSLV_MASK 0x1FFF -#define CCDC_FMT_VERT_FMTSLV_SHIFT 16 -#define CCDC_VP_OUT_VERT_NUM_MASK 0x3FFF -#define CCDC_VP_OUT_VERT_NUM_SHIFT 17 -#define CCDC_VP_OUT_HORZ_NUM_MASK 0x1FFF -#define CCDC_VP_OUT_HORZ_NUM_SHIFT 4 -#define CCDC_VP_OUT_HORZ_ST_MASK 0xF -#define CCDC_HORZ_INFO_SPH_SHIFT 16 -#define CCDC_VERT_START_SLV0_SHIFT 16 -#define CCDC_VDINT_VDINT0_SHIFT 16 -#define CCDC_VDINT_VDINT1_MASK 0xFFFF -#define CCDC_PPC_RAW 1 -#define CCDC_DCSUB_DEFAULT_VAL 0 -#define CCDC_CLAMP_DEFAULT_VAL 0 -#define CCDC_ENABLE_VIDEO_PORT 0x8000 -#define CCDC_DISABLE_VIDEO_PORT 0 -#define CCDC_COLPTN_VAL 0xBB11BB11 -#define CCDC_TWO_BYTES_PER_PIXEL 2 -#define CCDC_INTERLACED_IMAGE_INVERT 0x4B6D -#define CCDC_INTERLACED_NO_IMAGE_INVERT 0x0249 -#define CCDC_PROGRESSIVE_IMAGE_INVERT 0x4000 -#define CCDC_PROGRESSIVE_NO_IMAGE_INVERT 0 -#define CCDC_INTERLACED_HEIGHT_SHIFT 1 -#define CCDC_SYN_MODE_INPMOD_SHIFT 12 -#define CCDC_SYN_MODE_INPMOD_MASK 3 -#define CCDC_SYN_MODE_8BITS (7 << 8) -#define CCDC_SYN_MODE_10BITS (6 << 8) -#define CCDC_SYN_MODE_11BITS (5 << 8) -#define CCDC_SYN_MODE_12BITS (4 << 8) -#define CCDC_SYN_MODE_13BITS (3 << 8) -#define CCDC_SYN_MODE_14BITS (2 << 8) -#define CCDC_SYN_MODE_15BITS (1 << 8) -#define CCDC_SYN_MODE_16BITS (0 << 8) -#define CCDC_SYN_FLDMODE_MASK 1 -#define CCDC_SYN_FLDMODE_SHIFT 7 -#define CCDC_REC656IF_BT656_EN 3 -#define CCDC_SYN_MODE_VD_POL_NEGATIVE BIT(2) -#define CCDC_CCDCFG_Y8POS_SHIFT 11 -#define CCDC_CCDCFG_BW656_10BIT BIT(5) -#define CCDC_SDOFST_FIELD_INTERLEAVED 0x249 -#define CCDC_NO_CULLING 0xffff00ff -#endif diff --git a/drivers/staging/media/deprecated/vpfe_capture/isif.c b/drivers/staging/media/deprecated/vpfe_capture/isif.c deleted file mode 100644 index 4059891c2824..000000000000 --- a/drivers/staging/media/deprecated/vpfe_capture/isif.c +++ /dev/null @@ -1,1127 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/* - * Copyright (C) 2008-2009 Texas Instruments Inc - * - * Image Sensor Interface (ISIF) driver - * - * This driver is for configuring the ISIF IP available on DM365 or any other - * TI SoCs. This is used for capturing yuv or bayer video or image data - * from a decoder or sensor. This IP is similar to the CCDC IP on DM355 - * and DM6446, but with enhanced or additional ip blocks. The driver - * configures the ISIF upon commands from the vpfe bridge driver through - * ccdc_hw_device interface. - * - * TODO: 1) Raw bayer parameter settings and bayer capture - * 2) Add support for control ioctl - */ -#include -#include -#include -#include -#include -#include -#include - -#include "isif.h" -#include - -#include "isif_regs.h" -#include "ccdc_hw_device.h" - -/* Defaults for module configuration parameters */ -static const struct isif_config_params_raw isif_config_defaults = { - .linearize = { - .en = 0, - .corr_shft = ISIF_NO_SHIFT, - .scale_fact = {1, 0}, - }, - .df_csc = { - .df_or_csc = 0, - .csc = { - .en = 0, - }, - }, - .dfc = { - .en = 0, - }, - .bclamp = { - .en = 0, - }, - .gain_offset = { - .gain = { - .r_ye = {1, 0}, - .gr_cy = {1, 0}, - .gb_g = {1, 0}, - .b_mg = {1, 0}, - }, - }, - .culling = { - .hcpat_odd = 0xff, - .hcpat_even = 0xff, - .vcpat = 0xff, - }, - .compress = { - .alg = ISIF_ALAW, - }, -}; - -/* ISIF operation configuration */ -static struct isif_oper_config { - struct device *dev; - enum vpfe_hw_if_type if_type; - struct isif_ycbcr_config ycbcr; - struct isif_params_raw bayer; - enum isif_data_pack data_pack; - /* ISIF base address */ - void __iomem *base_addr; - /* ISIF Linear Table 0 */ - void __iomem *linear_tbl0_addr; - /* ISIF Linear Table 1 */ - void __iomem *linear_tbl1_addr; -} isif_cfg = { - .ycbcr = { - .pix_fmt = CCDC_PIXFMT_YCBCR_8BIT, - .frm_fmt = CCDC_FRMFMT_INTERLACED, - .win = ISIF_WIN_NTSC, - .fid_pol = VPFE_PINPOL_POSITIVE, - .vd_pol = VPFE_PINPOL_POSITIVE, - .hd_pol = VPFE_PINPOL_POSITIVE, - .pix_order = CCDC_PIXORDER_CBYCRY, - .buf_type = CCDC_BUFTYPE_FLD_INTERLEAVED, - }, - .bayer = { - .pix_fmt = CCDC_PIXFMT_RAW, - .frm_fmt = CCDC_FRMFMT_PROGRESSIVE, - .win = ISIF_WIN_VGA, - .fid_pol = VPFE_PINPOL_POSITIVE, - .vd_pol = VPFE_PINPOL_POSITIVE, - .hd_pol = VPFE_PINPOL_POSITIVE, - .gain = { - .r_ye = {1, 0}, - .gr_cy = {1, 0}, - .gb_g = {1, 0}, - .b_mg = {1, 0}, - }, - .cfa_pat = ISIF_CFA_PAT_MOSAIC, - .data_msb = ISIF_BIT_MSB_11, - .config_params = { - .data_shift = ISIF_NO_SHIFT, - .col_pat_field0 = { - .olop = ISIF_GREEN_BLUE, - .olep = ISIF_BLUE, - .elop = ISIF_RED, - .elep = ISIF_GREEN_RED, - }, - .col_pat_field1 = { - .olop = ISIF_GREEN_BLUE, - .olep = ISIF_BLUE, - .elop = ISIF_RED, - .elep = ISIF_GREEN_RED, - }, - .test_pat_gen = 0, - }, - }, - .data_pack = ISIF_DATA_PACK8, -}; - -/* Raw Bayer formats */ -static const u32 isif_raw_bayer_pix_formats[] = { - V4L2_PIX_FMT_SBGGR8, V4L2_PIX_FMT_SBGGR16}; - -/* Raw YUV formats */ -static const u32 isif_raw_yuv_pix_formats[] = { - V4L2_PIX_FMT_UYVY, V4L2_PIX_FMT_YUYV}; - -/* register access routines */ -static inline u32 regr(u32 offset) -{ - return __raw_readl(isif_cfg.base_addr + offset); -} - -static inline void regw(u32 val, u32 offset) -{ - __raw_writel(val, isif_cfg.base_addr + offset); -} - -/* reg_modify() - read, modify and write register */ -static inline u32 reg_modify(u32 mask, u32 val, u32 offset) -{ - u32 new_val = (regr(offset) & ~mask) | (val & mask); - - regw(new_val, offset); - return new_val; -} - -static inline void regw_lin_tbl(u32 val, u32 offset, int i) -{ - if (!i) - __raw_writel(val, isif_cfg.linear_tbl0_addr + offset); - else - __raw_writel(val, isif_cfg.linear_tbl1_addr + offset); -} - -static void isif_disable_all_modules(void) -{ - /* disable BC */ - regw(0, CLAMPCFG); - /* disable vdfc */ - regw(0, DFCCTL); - /* disable CSC */ - regw(0, CSCCTL); - /* disable linearization */ - regw(0, LINCFG0); - /* disable other modules here as they are supported */ -} - -static void isif_enable(int en) -{ - if (!en) { - /* Before disable isif, disable all ISIF modules */ - isif_disable_all_modules(); - /* - * wait for next VD. Assume lowest scan rate is 12 Hz. So - * 100 msec delay is good enough - */ - msleep(100); - } - reg_modify(ISIF_SYNCEN_VDHDEN_MASK, en, SYNCEN); -} - -static void isif_enable_output_to_sdram(int en) -{ - reg_modify(ISIF_SYNCEN_WEN_MASK, en << ISIF_SYNCEN_WEN_SHIFT, SYNCEN); -} - -static void isif_config_culling(struct isif_cul *cul) -{ - u32 val; - - /* Horizontal pattern */ - val = (cul->hcpat_even << CULL_PAT_EVEN_LINE_SHIFT) | cul->hcpat_odd; - regw(val, CULH); - - /* vertical pattern */ - regw(cul->vcpat, CULV); - - /* LPF */ - reg_modify(ISIF_LPF_MASK << ISIF_LPF_SHIFT, - cul->en_lpf << ISIF_LPF_SHIFT, MODESET); -} - -static void isif_config_gain_offset(void) -{ - struct isif_gain_offsets_adj *gain_off_p = - &isif_cfg.bayer.config_params.gain_offset; - u32 val; - - val = (!!gain_off_p->gain_sdram_en << GAIN_SDRAM_EN_SHIFT) | - (!!gain_off_p->gain_ipipe_en << GAIN_IPIPE_EN_SHIFT) | - (!!gain_off_p->gain_h3a_en << GAIN_H3A_EN_SHIFT) | - (!!gain_off_p->offset_sdram_en << OFST_SDRAM_EN_SHIFT) | - (!!gain_off_p->offset_ipipe_en << OFST_IPIPE_EN_SHIFT) | - (!!gain_off_p->offset_h3a_en << OFST_H3A_EN_SHIFT); - - reg_modify(GAIN_OFFSET_EN_MASK, val, CGAMMAWD); - - val = (gain_off_p->gain.r_ye.integer << GAIN_INTEGER_SHIFT) | - gain_off_p->gain.r_ye.decimal; - regw(val, CRGAIN); - - val = (gain_off_p->gain.gr_cy.integer << GAIN_INTEGER_SHIFT) | - gain_off_p->gain.gr_cy.decimal; - regw(val, CGRGAIN); - - val = (gain_off_p->gain.gb_g.integer << GAIN_INTEGER_SHIFT) | - gain_off_p->gain.gb_g.decimal; - regw(val, CGBGAIN); - - val = (gain_off_p->gain.b_mg.integer << GAIN_INTEGER_SHIFT) | - gain_off_p->gain.b_mg.decimal; - regw(val, CBGAIN); - - regw(gain_off_p->offset, COFSTA); -} - -static void isif_restore_defaults(void) -{ - enum vpss_ccdc_source_sel source = VPSS_CCDCIN; - - dev_dbg(isif_cfg.dev, "\nstarting isif_restore_defaults..."); - isif_cfg.bayer.config_params = isif_config_defaults; - /* Enable clock to ISIF, IPIPEIF and BL */ - vpss_enable_clock(VPSS_CCDC_CLOCK, 1); - vpss_enable_clock(VPSS_IPIPEIF_CLOCK, 1); - vpss_enable_clock(VPSS_BL_CLOCK, 1); - /* Set default offset and gain */ - isif_config_gain_offset(); - vpss_select_ccdc_source(source); - dev_dbg(isif_cfg.dev, "\nEnd of isif_restore_defaults..."); -} - -static int isif_open(struct device *device) -{ - isif_restore_defaults(); - return 0; -} - -/* This function will configure the window size to be capture in ISIF reg */ -static void isif_setwin(struct v4l2_rect *image_win, - enum ccdc_frmfmt frm_fmt, int ppc) -{ - int horz_start, horz_nr_pixels; - int vert_start, vert_nr_lines; - int mid_img = 0; - - dev_dbg(isif_cfg.dev, "\nStarting isif_setwin..."); - /* - * ppc - per pixel count. indicates how many pixels per cell - * output to SDRAM. example, for ycbcr, it is one y and one c, so 2. - * raw capture this is 1 - */ - horz_start = image_win->left << (ppc - 1); - horz_nr_pixels = ((image_win->width) << (ppc - 1)) - 1; - - /* Writing the horizontal info into the registers */ - regw(horz_start & START_PX_HOR_MASK, SPH); - regw(horz_nr_pixels & NUM_PX_HOR_MASK, LNH); - vert_start = image_win->top; - - if (frm_fmt == CCDC_FRMFMT_INTERLACED) { - vert_nr_lines = (image_win->height >> 1) - 1; - vert_start >>= 1; - /* To account for VD since line 0 doesn't have any data */ - vert_start += 1; - } else { - /* To account for VD since line 0 doesn't have any data */ - vert_start += 1; - vert_nr_lines = image_win->height - 1; - /* configure VDINT0 and VDINT1 */ - mid_img = vert_start + (image_win->height / 2); - regw(mid_img, VDINT1); - } - - regw(0, VDINT0); - regw(vert_start & START_VER_ONE_MASK, SLV0); - regw(vert_start & START_VER_TWO_MASK, SLV1); - regw(vert_nr_lines & NUM_LINES_VER, LNV); -} - -static void isif_config_bclamp(struct isif_black_clamp *bc) -{ - u32 val; - - /* - * DC Offset is always added to image data irrespective of bc enable - * status - */ - regw(bc->dc_offset, CLDCOFST); - - if (bc->en) { - val = bc->bc_mode_color << ISIF_BC_MODE_COLOR_SHIFT; - - /* Enable BC and horizontal clamp calculation parameters */ - val = val | 1 | (bc->horz.mode << ISIF_HORZ_BC_MODE_SHIFT); - - regw(val, CLAMPCFG); - - if (bc->horz.mode != ISIF_HORZ_BC_DISABLE) { - /* - * Window count for calculation - * Base window selection - * pixel limit - * Horizontal size of window - * vertical size of the window - * Horizontal start position of the window - * Vertical start position of the window - */ - val = bc->horz.win_count_calc | - ((!!bc->horz.base_win_sel_calc) << - ISIF_HORZ_BC_WIN_SEL_SHIFT) | - ((!!bc->horz.clamp_pix_limit) << - ISIF_HORZ_BC_PIX_LIMIT_SHIFT) | - (bc->horz.win_h_sz_calc << - ISIF_HORZ_BC_WIN_H_SIZE_SHIFT) | - (bc->horz.win_v_sz_calc << - ISIF_HORZ_BC_WIN_V_SIZE_SHIFT); - regw(val, CLHWIN0); - - regw(bc->horz.win_start_h_calc, CLHWIN1); - regw(bc->horz.win_start_v_calc, CLHWIN2); - } - - /* vertical clamp calculation parameters */ - - /* Reset clamp value sel for previous line */ - val |= - (bc->vert.reset_val_sel << ISIF_VERT_BC_RST_VAL_SEL_SHIFT) | - (bc->vert.line_ave_coef << ISIF_VERT_BC_LINE_AVE_COEF_SHIFT); - regw(val, CLVWIN0); - - /* Optical Black horizontal start position */ - regw(bc->vert.ob_start_h, CLVWIN1); - /* Optical Black vertical start position */ - regw(bc->vert.ob_start_v, CLVWIN2); - /* Optical Black vertical size for calculation */ - regw(bc->vert.ob_v_sz_calc, CLVWIN3); - /* Vertical start position for BC subtraction */ - regw(bc->vert_start_sub, CLSV); - } -} - -static void isif_config_linearization(struct isif_linearize *linearize) -{ - u32 val, i; - - if (!linearize->en) { - regw(0, LINCFG0); - return; - } - - /* shift value for correction & enable linearization (set lsb) */ - val = (linearize->corr_shft << ISIF_LIN_CORRSFT_SHIFT) | 1; - regw(val, LINCFG0); - - /* Scale factor */ - val = ((!!linearize->scale_fact.integer) << - ISIF_LIN_SCALE_FACT_INTEG_SHIFT) | - linearize->scale_fact.decimal; - regw(val, LINCFG1); - - for (i = 0; i < ISIF_LINEAR_TAB_SIZE; i++) { - if (i % 2) - regw_lin_tbl(linearize->table[i], ((i >> 1) << 2), 1); - else - regw_lin_tbl(linearize->table[i], ((i >> 1) << 2), 0); - } -} - -static int isif_config_dfc(struct isif_dfc *vdfc) -{ - /* initialize retries to loop for max ~ 250 usec */ - u32 val, count, retries = loops_per_jiffy / (4000/HZ); - int i; - - if (!vdfc->en) - return 0; - - /* Correction mode */ - val = (vdfc->corr_mode << ISIF_VDFC_CORR_MOD_SHIFT); - - /* Correct whole line or partial */ - if (vdfc->corr_whole_line) - val |= 1 << ISIF_VDFC_CORR_WHOLE_LN_SHIFT; - - /* level shift value */ - val |= vdfc->def_level_shift << ISIF_VDFC_LEVEL_SHFT_SHIFT; - - regw(val, DFCCTL); - - /* Defect saturation level */ - regw(vdfc->def_sat_level, VDFSATLV); - - regw(vdfc->table[0].pos_vert, DFCMEM0); - regw(vdfc->table[0].pos_horz, DFCMEM1); - if (vdfc->corr_mode == ISIF_VDFC_NORMAL || - vdfc->corr_mode == ISIF_VDFC_HORZ_INTERPOL_IF_SAT) { - regw(vdfc->table[0].level_at_pos, DFCMEM2); - regw(vdfc->table[0].level_up_pixels, DFCMEM3); - regw(vdfc->table[0].level_low_pixels, DFCMEM4); - } - - /* set DFCMARST and set DFCMWR */ - val = regr(DFCMEMCTL) | (1 << ISIF_DFCMEMCTL_DFCMARST_SHIFT) | 1; - regw(val, DFCMEMCTL); - - count = retries; - while (count && (regr(DFCMEMCTL) & 0x1)) - count--; - - if (!count) { - dev_dbg(isif_cfg.dev, "defect table write timeout !!!\n"); - return -1; - } - - for (i = 1; i < vdfc->num_vdefects; i++) { - regw(vdfc->table[i].pos_vert, DFCMEM0); - regw(vdfc->table[i].pos_horz, DFCMEM1); - if (vdfc->corr_mode == ISIF_VDFC_NORMAL || - vdfc->corr_mode == ISIF_VDFC_HORZ_INTERPOL_IF_SAT) { - regw(vdfc->table[i].level_at_pos, DFCMEM2); - regw(vdfc->table[i].level_up_pixels, DFCMEM3); - regw(vdfc->table[i].level_low_pixels, DFCMEM4); - } - val = regr(DFCMEMCTL); - /* clear DFCMARST and set DFCMWR */ - val &= ~BIT(ISIF_DFCMEMCTL_DFCMARST_SHIFT); - val |= 1; - regw(val, DFCMEMCTL); - - count = retries; - while (count && (regr(DFCMEMCTL) & 0x1)) - count--; - - if (!count) { - dev_err(isif_cfg.dev, - "defect table write timeout !!!\n"); - return -1; - } - } - if (vdfc->num_vdefects < ISIF_VDFC_TABLE_SIZE) { - /* Extra cycle needed */ - regw(0, DFCMEM0); - regw(0x1FFF, DFCMEM1); - regw(1, DFCMEMCTL); - } - - /* enable VDFC */ - reg_modify((1 << ISIF_VDFC_EN_SHIFT), (1 << ISIF_VDFC_EN_SHIFT), - DFCCTL); - return 0; -} - -static void isif_config_csc(struct isif_df_csc *df_csc) -{ - u32 val1 = 0, val2 = 0, i; - - if (!df_csc->csc.en) { - regw(0, CSCCTL); - return; - } - for (i = 0; i < ISIF_CSC_NUM_COEFF; i++) { - if ((i % 2) == 0) { - /* CSCM - LSB */ - val1 = (df_csc->csc.coeff[i].integer << - ISIF_CSC_COEF_INTEG_SHIFT) | - df_csc->csc.coeff[i].decimal; - } else { - - /* CSCM - MSB */ - val2 = (df_csc->csc.coeff[i].integer << - ISIF_CSC_COEF_INTEG_SHIFT) | - df_csc->csc.coeff[i].decimal; - val2 <<= ISIF_CSCM_MSB_SHIFT; - val2 |= val1; - regw(val2, (CSCM0 + ((i - 1) << 1))); - } - } - - /* program the active area */ - regw(df_csc->start_pix, FMTSPH); - /* - * one extra pixel as required for CSC. Actually number of - * pixel - 1 should be configured in this register. So we - * need to subtract 1 before writing to FMTSPH, but we will - * not do this since csc requires one extra pixel - */ - regw(df_csc->num_pixels, FMTLNH); - regw(df_csc->start_line, FMTSLV); - /* - * one extra line as required for CSC. See reason documented for - * num_pixels - */ - regw(df_csc->num_lines, FMTLNV); - - /* Enable CSC */ - regw(1, CSCCTL); -} - -static int isif_config_raw(void) -{ - struct isif_params_raw *params = &isif_cfg.bayer; - struct isif_config_params_raw *module_params = - &isif_cfg.bayer.config_params; - struct vpss_pg_frame_size frame_size; - struct vpss_sync_pol sync; - u32 val; - - dev_dbg(isif_cfg.dev, "\nStarting isif_config_raw..\n"); - - /* - * Configure CCDCFG register:- - * Set CCD Not to swap input since input is RAW data - * Set FID detection function to Latch at V-Sync - * Set WENLOG - isif valid area - * Set TRGSEL - * Set EXTRG - * Packed to 8 or 16 bits - */ - - val = ISIF_YCINSWP_RAW | ISIF_CCDCFG_FIDMD_LATCH_VSYNC | - ISIF_CCDCFG_WENLOG_AND | ISIF_CCDCFG_TRGSEL_WEN | - ISIF_CCDCFG_EXTRG_DISABLE | isif_cfg.data_pack; - - dev_dbg(isif_cfg.dev, "Writing 0x%x to ...CCDCFG \n", val); - regw(val, CCDCFG); - - /* - * Configure the vertical sync polarity(MODESET.VDPOL) - * Configure the horizontal sync polarity (MODESET.HDPOL) - * Configure frame id polarity (MODESET.FLDPOL) - * Configure data polarity - * Configure External WEN Selection - * Configure frame format(progressive or interlace) - * Configure pixel format (Input mode) - * Configure the data shift - */ - - val = ISIF_VDHDOUT_INPUT | (params->vd_pol << ISIF_VD_POL_SHIFT) | - (params->hd_pol << ISIF_HD_POL_SHIFT) | - (params->fid_pol << ISIF_FID_POL_SHIFT) | - (ISIF_DATAPOL_NORMAL << ISIF_DATAPOL_SHIFT) | - (ISIF_EXWEN_DISABLE << ISIF_EXWEN_SHIFT) | - (params->frm_fmt << ISIF_FRM_FMT_SHIFT) | - (params->pix_fmt << ISIF_INPUT_SHIFT) | - (params->config_params.data_shift << ISIF_DATASFT_SHIFT); - - regw(val, MODESET); - dev_dbg(isif_cfg.dev, "Writing 0x%x to MODESET...\n", val); - - /* - * Configure GAMMAWD register - * CFA pattern setting - */ - val = params->cfa_pat << ISIF_GAMMAWD_CFA_SHIFT; - - /* Gamma msb */ - if (module_params->compress.alg == ISIF_ALAW) - val |= ISIF_ALAW_ENABLE; - - val |= (params->data_msb << ISIF_ALAW_GAMMA_WD_SHIFT); - regw(val, CGAMMAWD); - - /* Configure DPCM compression settings */ - if (module_params->compress.alg == ISIF_DPCM) { - val = BIT(ISIF_DPCM_EN_SHIFT) | - (module_params->compress.pred << - ISIF_DPCM_PREDICTOR_SHIFT); - } - - regw(val, MISC); - - /* Configure Gain & Offset */ - isif_config_gain_offset(); - - /* Configure Color pattern */ - val = (params->config_params.col_pat_field0.olop) | - (params->config_params.col_pat_field0.olep << 2) | - (params->config_params.col_pat_field0.elop << 4) | - (params->config_params.col_pat_field0.elep << 6) | - (params->config_params.col_pat_field1.olop << 8) | - (params->config_params.col_pat_field1.olep << 10) | - (params->config_params.col_pat_field1.elop << 12) | - (params->config_params.col_pat_field1.elep << 14); - regw(val, CCOLP); - dev_dbg(isif_cfg.dev, "Writing %x to CCOLP ...\n", val); - - /* Configure HSIZE register */ - val = (!!params->horz_flip_en) << ISIF_HSIZE_FLIP_SHIFT; - - /* calculate line offset in 32 bytes based on pack value */ - if (isif_cfg.data_pack == ISIF_PACK_8BIT) - val |= ((params->win.width + 31) >> 5); - else if (isif_cfg.data_pack == ISIF_PACK_12BIT) - val |= (((params->win.width + - (params->win.width >> 2)) + 31) >> 5); - else - val |= (((params->win.width * 2) + 31) >> 5); - regw(val, HSIZE); - - /* Configure SDOFST register */ - if (params->frm_fmt == CCDC_FRMFMT_INTERLACED) { - if (params->image_invert_en) { - /* For interlace inverse mode */ - regw(0x4B6D, SDOFST); - dev_dbg(isif_cfg.dev, "Writing 0x4B6D to SDOFST...\n"); - } else { - /* For interlace non inverse mode */ - regw(0x0B6D, SDOFST); - dev_dbg(isif_cfg.dev, "Writing 0x0B6D to SDOFST...\n"); - } - } else if (params->frm_fmt == CCDC_FRMFMT_PROGRESSIVE) { - if (params->image_invert_en) { - /* For progressive inverse mode */ - regw(0x4000, SDOFST); - dev_dbg(isif_cfg.dev, "Writing 0x4000 to SDOFST...\n"); - } else { - /* For progressive non inverse mode */ - regw(0x0000, SDOFST); - dev_dbg(isif_cfg.dev, "Writing 0x0000 to SDOFST...\n"); - } - } - - /* Configure video window */ - isif_setwin(¶ms->win, params->frm_fmt, 1); - - /* Configure Black Clamp */ - isif_config_bclamp(&module_params->bclamp); - - /* Configure Vertical Defection Pixel Correction */ - if (isif_config_dfc(&module_params->dfc) < 0) - return -EFAULT; - - if (!module_params->df_csc.df_or_csc) - /* Configure Color Space Conversion */ - isif_config_csc(&module_params->df_csc); - - isif_config_linearization(&module_params->linearize); - - /* Configure Culling */ - isif_config_culling(&module_params->culling); - - /* Configure horizontal and vertical offsets(DFC,LSC,Gain) */ - regw(module_params->horz_offset, DATAHOFST); - regw(module_params->vert_offset, DATAVOFST); - - /* Setup test pattern if enabled */ - if (params->config_params.test_pat_gen) { - /* Use the HD/VD pol settings from user */ - sync.ccdpg_hdpol = params->hd_pol; - sync.ccdpg_vdpol = params->vd_pol; - dm365_vpss_set_sync_pol(sync); - frame_size.hlpfr = isif_cfg.bayer.win.width; - frame_size.pplen = isif_cfg.bayer.win.height; - dm365_vpss_set_pg_frame_size(frame_size); - vpss_select_ccdc_source(VPSS_PGLPBK); - } - - dev_dbg(isif_cfg.dev, "\nEnd of isif_config_ycbcr...\n"); - return 0; -} - -static int isif_set_buftype(enum ccdc_buftype buf_type) -{ - if (isif_cfg.if_type == VPFE_RAW_BAYER) - isif_cfg.bayer.buf_type = buf_type; - else - isif_cfg.ycbcr.buf_type = buf_type; - - return 0; - -} -static enum ccdc_buftype isif_get_buftype(void) -{ - if (isif_cfg.if_type == VPFE_RAW_BAYER) - return isif_cfg.bayer.buf_type; - - return isif_cfg.ycbcr.buf_type; -} - -static int isif_enum_pix(u32 *pix, int i) -{ - int ret = -EINVAL; - - if (isif_cfg.if_type == VPFE_RAW_BAYER) { - if (i < ARRAY_SIZE(isif_raw_bayer_pix_formats)) { - *pix = isif_raw_bayer_pix_formats[i]; - ret = 0; - } - } else { - if (i < ARRAY_SIZE(isif_raw_yuv_pix_formats)) { - *pix = isif_raw_yuv_pix_formats[i]; - ret = 0; - } - } - - return ret; -} - -static int isif_set_pixel_format(unsigned int pixfmt) -{ - if (isif_cfg.if_type == VPFE_RAW_BAYER) { - if (pixfmt == V4L2_PIX_FMT_SBGGR8) { - if ((isif_cfg.bayer.config_params.compress.alg != - ISIF_ALAW) && - (isif_cfg.bayer.config_params.compress.alg != - ISIF_DPCM)) { - dev_dbg(isif_cfg.dev, - "Either configure A-Law or DPCM\n"); - return -EINVAL; - } - isif_cfg.data_pack = ISIF_PACK_8BIT; - } else if (pixfmt == V4L2_PIX_FMT_SBGGR16) { - isif_cfg.bayer.config_params.compress.alg = - ISIF_NO_COMPRESSION; - isif_cfg.data_pack = ISIF_PACK_16BIT; - } else - return -EINVAL; - isif_cfg.bayer.pix_fmt = CCDC_PIXFMT_RAW; - } else { - if (pixfmt == V4L2_PIX_FMT_YUYV) - isif_cfg.ycbcr.pix_order = CCDC_PIXORDER_YCBYCR; - else if (pixfmt == V4L2_PIX_FMT_UYVY) - isif_cfg.ycbcr.pix_order = CCDC_PIXORDER_CBYCRY; - else - return -EINVAL; - isif_cfg.data_pack = ISIF_PACK_8BIT; - } - return 0; -} - -static u32 isif_get_pixel_format(void) -{ - u32 pixfmt; - - if (isif_cfg.if_type == VPFE_RAW_BAYER) - if (isif_cfg.bayer.config_params.compress.alg == ISIF_ALAW || - isif_cfg.bayer.config_params.compress.alg == ISIF_DPCM) - pixfmt = V4L2_PIX_FMT_SBGGR8; - else - pixfmt = V4L2_PIX_FMT_SBGGR16; - else { - if (isif_cfg.ycbcr.pix_order == CCDC_PIXORDER_YCBYCR) - pixfmt = V4L2_PIX_FMT_YUYV; - else - pixfmt = V4L2_PIX_FMT_UYVY; - } - return pixfmt; -} - -static int isif_set_image_window(struct v4l2_rect *win) -{ - if (isif_cfg.if_type == VPFE_RAW_BAYER) { - isif_cfg.bayer.win.top = win->top; - isif_cfg.bayer.win.left = win->left; - isif_cfg.bayer.win.width = win->width; - isif_cfg.bayer.win.height = win->height; - } else { - isif_cfg.ycbcr.win.top = win->top; - isif_cfg.ycbcr.win.left = win->left; - isif_cfg.ycbcr.win.width = win->width; - isif_cfg.ycbcr.win.height = win->height; - } - return 0; -} - -static void isif_get_image_window(struct v4l2_rect *win) -{ - if (isif_cfg.if_type == VPFE_RAW_BAYER) - *win = isif_cfg.bayer.win; - else - *win = isif_cfg.ycbcr.win; -} - -static unsigned int isif_get_line_length(void) -{ - unsigned int len; - - if (isif_cfg.if_type == VPFE_RAW_BAYER) { - if (isif_cfg.data_pack == ISIF_PACK_8BIT) - len = ((isif_cfg.bayer.win.width)); - else if (isif_cfg.data_pack == ISIF_PACK_12BIT) - len = (((isif_cfg.bayer.win.width * 2) + - (isif_cfg.bayer.win.width >> 2))); - else - len = (((isif_cfg.bayer.win.width * 2))); - } else - len = (((isif_cfg.ycbcr.win.width * 2))); - return ALIGN(len, 32); -} - -static int isif_set_frame_format(enum ccdc_frmfmt frm_fmt) -{ - if (isif_cfg.if_type == VPFE_RAW_BAYER) - isif_cfg.bayer.frm_fmt = frm_fmt; - else - isif_cfg.ycbcr.frm_fmt = frm_fmt; - return 0; -} -static enum ccdc_frmfmt isif_get_frame_format(void) -{ - if (isif_cfg.if_type == VPFE_RAW_BAYER) - return isif_cfg.bayer.frm_fmt; - return isif_cfg.ycbcr.frm_fmt; -} - -static int isif_getfid(void) -{ - return (regr(MODESET) >> 15) & 0x1; -} - -/* misc operations */ -static void isif_setfbaddr(unsigned long addr) -{ - regw((addr >> 21) & 0x07ff, CADU); - regw((addr >> 5) & 0x0ffff, CADL); -} - -static int isif_set_hw_if_params(struct vpfe_hw_if_param *params) -{ - isif_cfg.if_type = params->if_type; - - switch (params->if_type) { - case VPFE_BT656: - case VPFE_BT656_10BIT: - case VPFE_YCBCR_SYNC_8: - isif_cfg.ycbcr.pix_fmt = CCDC_PIXFMT_YCBCR_8BIT; - isif_cfg.ycbcr.pix_order = CCDC_PIXORDER_CBYCRY; - break; - case VPFE_BT1120: - case VPFE_YCBCR_SYNC_16: - isif_cfg.ycbcr.pix_fmt = CCDC_PIXFMT_YCBCR_16BIT; - isif_cfg.ycbcr.pix_order = CCDC_PIXORDER_CBYCRY; - break; - case VPFE_RAW_BAYER: - isif_cfg.bayer.pix_fmt = CCDC_PIXFMT_RAW; - break; - default: - dev_dbg(isif_cfg.dev, "Invalid interface type\n"); - return -EINVAL; - } - - return 0; -} - -/* This function will configure ISIF for YCbCr parameters. */ -static int isif_config_ycbcr(void) -{ - struct isif_ycbcr_config *params = &isif_cfg.ycbcr; - u32 modeset = 0, ccdcfg = 0; - - dev_dbg(isif_cfg.dev, "\nStarting isif_config_ycbcr..."); - - /* configure pixel format or input mode */ - modeset = modeset | (params->pix_fmt << ISIF_INPUT_SHIFT) | - (params->frm_fmt << ISIF_FRM_FMT_SHIFT) | - (params->fid_pol << ISIF_FID_POL_SHIFT) | - (params->hd_pol << ISIF_HD_POL_SHIFT) | - (params->vd_pol << ISIF_VD_POL_SHIFT); - - /* pack the data to 8-bit ISIFCFG */ - switch (isif_cfg.if_type) { - case VPFE_BT656: - if (params->pix_fmt != CCDC_PIXFMT_YCBCR_8BIT) { - dev_dbg(isif_cfg.dev, "Invalid pix_fmt(input mode)\n"); - return -EINVAL; - } - modeset |= (VPFE_PINPOL_NEGATIVE << ISIF_VD_POL_SHIFT); - regw(3, REC656IF); - ccdcfg = ccdcfg | ISIF_DATA_PACK8 | ISIF_YCINSWP_YCBCR; - break; - case VPFE_BT656_10BIT: - if (params->pix_fmt != CCDC_PIXFMT_YCBCR_8BIT) { - dev_dbg(isif_cfg.dev, "Invalid pix_fmt(input mode)\n"); - return -EINVAL; - } - /* setup BT.656, embedded sync */ - regw(3, REC656IF); - /* enable 10 bit mode in ccdcfg */ - ccdcfg = ccdcfg | ISIF_DATA_PACK8 | ISIF_YCINSWP_YCBCR | - ISIF_BW656_ENABLE; - break; - case VPFE_BT1120: - if (params->pix_fmt != CCDC_PIXFMT_YCBCR_16BIT) { - dev_dbg(isif_cfg.dev, "Invalid pix_fmt(input mode)\n"); - return -EINVAL; - } - regw(3, REC656IF); - break; - - case VPFE_YCBCR_SYNC_8: - ccdcfg |= ISIF_DATA_PACK8; - ccdcfg |= ISIF_YCINSWP_YCBCR; - if (params->pix_fmt != CCDC_PIXFMT_YCBCR_8BIT) { - dev_dbg(isif_cfg.dev, "Invalid pix_fmt(input mode)\n"); - return -EINVAL; - } - break; - case VPFE_YCBCR_SYNC_16: - if (params->pix_fmt != CCDC_PIXFMT_YCBCR_16BIT) { - dev_dbg(isif_cfg.dev, "Invalid pix_fmt(input mode)\n"); - return -EINVAL; - } - break; - default: - /* should never come here */ - dev_dbg(isif_cfg.dev, "Invalid interface type\n"); - return -EINVAL; - } - - regw(modeset, MODESET); - - /* Set up pix order */ - ccdcfg |= params->pix_order << ISIF_PIX_ORDER_SHIFT; - - regw(ccdcfg, CCDCFG); - - /* configure video window */ - if ((isif_cfg.if_type == VPFE_BT1120) || - (isif_cfg.if_type == VPFE_YCBCR_SYNC_16)) - isif_setwin(¶ms->win, params->frm_fmt, 1); - else - isif_setwin(¶ms->win, params->frm_fmt, 2); - - /* - * configure the horizontal line offset - * this is done by rounding up width to a multiple of 16 pixels - * and multiply by two to account for y:cb:cr 4:2:2 data - */ - regw(((((params->win.width * 2) + 31) & 0xffffffe0) >> 5), HSIZE); - - /* configure the memory line offset */ - if ((params->frm_fmt == CCDC_FRMFMT_INTERLACED) && - (params->buf_type == CCDC_BUFTYPE_FLD_INTERLEAVED)) - /* two fields are interleaved in memory */ - regw(0x00000249, SDOFST); - - return 0; -} - -static int isif_configure(void) -{ - if (isif_cfg.if_type == VPFE_RAW_BAYER) - return isif_config_raw(); - return isif_config_ycbcr(); -} - -static int isif_close(struct device *device) -{ - /* copy defaults to module params */ - isif_cfg.bayer.config_params = isif_config_defaults; - return 0; -} - -static const struct ccdc_hw_device isif_hw_dev = { - .name = "ISIF", - .owner = THIS_MODULE, - .hw_ops = { - .open = isif_open, - .close = isif_close, - .enable = isif_enable, - .enable_out_to_sdram = isif_enable_output_to_sdram, - .set_hw_if_params = isif_set_hw_if_params, - .configure = isif_configure, - .set_buftype = isif_set_buftype, - .get_buftype = isif_get_buftype, - .enum_pix = isif_enum_pix, - .set_pixel_format = isif_set_pixel_format, - .get_pixel_format = isif_get_pixel_format, - .set_frame_format = isif_set_frame_format, - .get_frame_format = isif_get_frame_format, - .set_image_window = isif_set_image_window, - .get_image_window = isif_get_image_window, - .get_line_length = isif_get_line_length, - .setfbaddr = isif_setfbaddr, - .getfid = isif_getfid, - }, -}; - -static int isif_probe(struct platform_device *pdev) -{ - void (*setup_pinmux)(void); - struct resource *res; - void __iomem *addr; - int status = 0, i; - - /* Platform data holds setup_pinmux function ptr */ - if (!pdev->dev.platform_data) - return -ENODEV; - - /* - * first try to register with vpfe. If not correct platform, then we - * don't have to iomap - */ - status = vpfe_register_ccdc_device(&isif_hw_dev); - if (status < 0) - return status; - - setup_pinmux = pdev->dev.platform_data; - /* - * setup Mux configuration for ccdc which may be different for - * different SoCs using this CCDC - */ - setup_pinmux(); - - i = 0; - /* Get the ISIF base address, linearization table0 and table1 addr. */ - while (i < 3) { - res = platform_get_resource(pdev, IORESOURCE_MEM, i); - if (!res) { - status = -ENODEV; - goto fail_nobase_res; - } - res = request_mem_region(res->start, resource_size(res), - res->name); - if (!res) { - status = -EBUSY; - goto fail_nobase_res; - } - addr = ioremap(res->start, resource_size(res)); - if (!addr) { - status = -ENOMEM; - goto fail_base_iomap; - } - switch (i) { - case 0: - /* ISIF base address */ - isif_cfg.base_addr = addr; - break; - case 1: - /* ISIF linear tbl0 address */ - isif_cfg.linear_tbl0_addr = addr; - break; - default: - /* ISIF linear tbl0 address */ - isif_cfg.linear_tbl1_addr = addr; - break; - } - i++; - } - isif_cfg.dev = &pdev->dev; - - printk(KERN_NOTICE "%s is registered with vpfe.\n", - isif_hw_dev.name); - return 0; -fail_base_iomap: - release_mem_region(res->start, resource_size(res)); - i--; -fail_nobase_res: - if (isif_cfg.base_addr) { - iounmap(isif_cfg.base_addr); - isif_cfg.base_addr = NULL; - } - if (isif_cfg.linear_tbl0_addr) { - iounmap(isif_cfg.linear_tbl0_addr); - isif_cfg.linear_tbl0_addr = NULL; - } - - while (i >= 0) { - res = platform_get_resource(pdev, IORESOURCE_MEM, i); - if (res) - release_mem_region(res->start, resource_size(res)); - i--; - } - vpfe_unregister_ccdc_device(&isif_hw_dev); - return status; -} - -static int isif_remove(struct platform_device *pdev) -{ - struct resource *res; - int i = 0; - - iounmap(isif_cfg.base_addr); - isif_cfg.base_addr = NULL; - iounmap(isif_cfg.linear_tbl0_addr); - isif_cfg.linear_tbl0_addr = NULL; - iounmap(isif_cfg.linear_tbl1_addr); - isif_cfg.linear_tbl1_addr = NULL; - while (i < 3) { - res = platform_get_resource(pdev, IORESOURCE_MEM, i); - release_mem_region(res->start, resource_size(res)); - i++; - } - vpfe_unregister_ccdc_device(&isif_hw_dev); - return 0; -} - -static struct platform_driver isif_driver = { - .driver = { - .name = "isif", - }, - .remove = isif_remove, - .probe = isif_probe, -}; - -module_platform_driver(isif_driver); - -MODULE_LICENSE("GPL"); diff --git a/drivers/staging/media/deprecated/vpfe_capture/isif.h b/drivers/staging/media/deprecated/vpfe_capture/isif.h deleted file mode 100644 index 8369acd26e7e..000000000000 --- a/drivers/staging/media/deprecated/vpfe_capture/isif.h +++ /dev/null @@ -1,518 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-or-later */ -/* - * Copyright (C) 2008-2009 Texas Instruments Inc - * - * isif header file - */ -#ifndef _ISIF_H -#define _ISIF_H - -#include -#include - -/* isif float type S8Q8/U8Q8 */ -struct isif_float_8 { - /* 8 bit integer part */ - __u8 integer; - /* 8 bit decimal part */ - __u8 decimal; -}; - -/* isif float type U16Q16/S16Q16 */ -struct isif_float_16 { - /* 16 bit integer part */ - __u16 integer; - /* 16 bit decimal part */ - __u16 decimal; -}; - -/************************************************************************ - * Vertical Defect Correction parameters - ***********************************************************************/ -/* Defect Correction (DFC) table entry */ -struct isif_vdfc_entry { - /* vertical position of defect */ - __u16 pos_vert; - /* horizontal position of defect */ - __u16 pos_horz; - /* - * Defect level of Vertical line defect position. This is subtracted - * from the data at the defect position - */ - __u8 level_at_pos; - /* - * Defect level of the pixels upper than the vertical line defect. - * This is subtracted from the data - */ - __u8 level_up_pixels; - /* - * Defect level of the pixels lower than the vertical line defect. - * This is subtracted from the data - */ - __u8 level_low_pixels; -}; - -#define ISIF_VDFC_TABLE_SIZE 8 -struct isif_dfc { - /* enable vertical defect correction */ - __u8 en; - /* Defect level subtraction. Just fed through if saturating */ -#define ISIF_VDFC_NORMAL 0 - /* - * Defect level subtraction. Horizontal interpolation ((i-2)+(i+2))/2 - * if data saturating - */ -#define ISIF_VDFC_HORZ_INTERPOL_IF_SAT 1 - /* Horizontal interpolation (((i-2)+(i+2))/2) */ -#define ISIF_VDFC_HORZ_INTERPOL 2 - /* one of the vertical defect correction modes above */ - __u8 corr_mode; - /* 0 - whole line corrected, 1 - not pixels upper than the defect */ - __u8 corr_whole_line; -#define ISIF_VDFC_NO_SHIFT 0 -#define ISIF_VDFC_SHIFT_1 1 -#define ISIF_VDFC_SHIFT_2 2 -#define ISIF_VDFC_SHIFT_3 3 -#define ISIF_VDFC_SHIFT_4 4 - /* - * defect level shift value. level_at_pos, level_upper_pos, - * and level_lower_pos can be shifted up by this value. Choose - * one of the values above - */ - __u8 def_level_shift; - /* defect saturation level */ - __u16 def_sat_level; - /* number of vertical defects. Max is ISIF_VDFC_TABLE_SIZE */ - __u16 num_vdefects; - /* VDFC table ptr */ - struct isif_vdfc_entry table[ISIF_VDFC_TABLE_SIZE]; -}; - -struct isif_horz_bclamp { - - /* Horizontal clamp disabled. Only vertical clamp value is subtracted */ -#define ISIF_HORZ_BC_DISABLE 0 - /* - * Horizontal clamp value is calculated and subtracted from image data - * along with vertical clamp value - */ -#define ISIF_HORZ_BC_CLAMP_CALC_ENABLED 1 - /* - * Horizontal clamp value calculated from previous image is subtracted - * from image data along with vertical clamp value. - */ -#define ISIF_HORZ_BC_CLAMP_NOT_UPDATED 2 - /* horizontal clamp mode. One of the values above */ - __u8 mode; - /* - * pixel value limit enable. - * 0 - limit disabled - * 1 - pixel value limited to 1023 - */ - __u8 clamp_pix_limit; - /* Select Most left window for bc calculation */ -#define ISIF_SEL_MOST_LEFT_WIN 0 - /* Select Most right window for bc calculation */ -#define ISIF_SEL_MOST_RIGHT_WIN 1 - /* Select most left or right window for clamp val calculation */ - __u8 base_win_sel_calc; - /* Window count per color for calculation. range 1-32 */ - __u8 win_count_calc; - /* Window start position - horizontal for calculation. 0 - 8191 */ - __u16 win_start_h_calc; - /* Window start position - vertical for calculation 0 - 8191 */ - __u16 win_start_v_calc; -#define ISIF_HORZ_BC_SZ_H_2PIXELS 0 -#define ISIF_HORZ_BC_SZ_H_4PIXELS 1 -#define ISIF_HORZ_BC_SZ_H_8PIXELS 2 -#define ISIF_HORZ_BC_SZ_H_16PIXELS 3 - /* Width of the sample window in pixels for calculation */ - __u8 win_h_sz_calc; -#define ISIF_HORZ_BC_SZ_V_32PIXELS 0 -#define ISIF_HORZ_BC_SZ_V_64PIXELS 1 -#define ISIF_HORZ_BC_SZ_V_128PIXELS 2 -#define ISIF_HORZ_BC_SZ_V_256PIXELS 3 - /* Height of the sample window in pixels for calculation */ - __u8 win_v_sz_calc; -}; - -/************************************************************************ - * Black Clamp parameters - ***********************************************************************/ -struct isif_vert_bclamp { - /* Reset value used is the clamp value calculated */ -#define ISIF_VERT_BC_USE_HORZ_CLAMP_VAL 0 - /* Reset value used is reset_clamp_val configured */ -#define ISIF_VERT_BC_USE_CONFIG_CLAMP_VAL 1 - /* No update, previous image value is used */ -#define ISIF_VERT_BC_NO_UPDATE 2 - /* - * Reset value selector for vertical clamp calculation. Use one of - * the above values - */ - __u8 reset_val_sel; - /* U8Q8. Line average coefficient used in vertical clamp calculation */ - __u8 line_ave_coef; - /* Height of the optical black region for calculation */ - __u16 ob_v_sz_calc; - /* Optical black region start position - horizontal. 0 - 8191 */ - __u16 ob_start_h; - /* Optical black region start position - vertical 0 - 8191 */ - __u16 ob_start_v; -}; - -struct isif_black_clamp { - /* - * This offset value is added irrespective of the clamp enable status. - * S13 - */ - __u16 dc_offset; - /* - * Enable black/digital clamp value to be subtracted from the image data - */ - __u8 en; - /* - * black clamp mode. same/separate clamp for 4 colors - * 0 - disable - same clamp value for all colors - * 1 - clamp value calculated separately for all colors - */ - __u8 bc_mode_color; - /* Vertical start position for bc subtraction */ - __u16 vert_start_sub; - /* Black clamp for horizontal direction */ - struct isif_horz_bclamp horz; - /* Black clamp for vertical direction */ - struct isif_vert_bclamp vert; -}; - -/************************************************************************* -** Color Space Conversion (CSC) -*************************************************************************/ -#define ISIF_CSC_NUM_COEFF 16 -struct isif_color_space_conv { - /* Enable color space conversion */ - __u8 en; - /* - * csc coefficient table. S8Q5, M00 at index 0, M01 at index 1, and - * so forth - */ - struct isif_float_8 coeff[ISIF_CSC_NUM_COEFF]; -}; - - -/************************************************************************* -** Black Compensation parameters -*************************************************************************/ -struct isif_black_comp { - /* Comp for Red */ - __s8 r_comp; - /* Comp for Gr */ - __s8 gr_comp; - /* Comp for Blue */ - __s8 b_comp; - /* Comp for Gb */ - __s8 gb_comp; -}; - -/************************************************************************* -** Gain parameters -*************************************************************************/ -struct isif_gain { - /* Gain for Red or ye */ - struct isif_float_16 r_ye; - /* Gain for Gr or cy */ - struct isif_float_16 gr_cy; - /* Gain for Gb or g */ - struct isif_float_16 gb_g; - /* Gain for Blue or mg */ - struct isif_float_16 b_mg; -}; - -#define ISIF_LINEAR_TAB_SIZE 192 -/************************************************************************* -** Linearization parameters -*************************************************************************/ -struct isif_linearize { - /* Enable or Disable linearization of data */ - __u8 en; - /* Shift value applied */ - __u8 corr_shft; - /* scale factor applied U11Q10 */ - struct isif_float_16 scale_fact; - /* Size of the linear table */ - __u16 table[ISIF_LINEAR_TAB_SIZE]; -}; - -/* Color patterns */ -#define ISIF_RED 0 -#define ISIF_GREEN_RED 1 -#define ISIF_GREEN_BLUE 2 -#define ISIF_BLUE 3 -struct isif_col_pat { - __u8 olop; - __u8 olep; - __u8 elop; - __u8 elep; -}; - -/************************************************************************* -** Data formatter parameters -*************************************************************************/ -struct isif_fmtplen { - /* - * number of program entries for SET0, range 1 - 16 - * when fmtmode is ISIF_SPLIT, 1 - 8 when fmtmode is - * ISIF_COMBINE - */ - __u16 plen0; - /* - * number of program entries for SET1, range 1 - 16 - * when fmtmode is ISIF_SPLIT, 1 - 8 when fmtmode is - * ISIF_COMBINE - */ - __u16 plen1; - /** - * number of program entries for SET2, range 1 - 16 - * when fmtmode is ISIF_SPLIT, 1 - 8 when fmtmode is - * ISIF_COMBINE - */ - __u16 plen2; - /** - * number of program entries for SET3, range 1 - 16 - * when fmtmode is ISIF_SPLIT, 1 - 8 when fmtmode is - * ISIF_COMBINE - */ - __u16 plen3; -}; - -struct isif_fmt_cfg { -#define ISIF_SPLIT 0 -#define ISIF_COMBINE 1 - /* Split or combine or line alternate */ - __u8 fmtmode; - /* enable or disable line alternating mode */ - __u8 ln_alter_en; -#define ISIF_1LINE 0 -#define ISIF_2LINES 1 -#define ISIF_3LINES 2 -#define ISIF_4LINES 3 - /* Split/combine line number */ - __u8 lnum; - /* Address increment Range 1 - 16 */ - __u8 addrinc; -}; - -struct isif_fmt_addr_ptr { - /* Initial address */ - __u32 init_addr; - /* output line number */ -#define ISIF_1STLINE 0 -#define ISIF_2NDLINE 1 -#define ISIF_3RDLINE 2 -#define ISIF_4THLINE 3 - __u8 out_line; -}; - -struct isif_fmtpgm_ap { - /* program address pointer */ - __u8 pgm_aptr; - /* program address increment or decrement */ - __u8 pgmupdt; -}; - -struct isif_data_formatter { - /* Enable/Disable data formatter */ - __u8 en; - /* data formatter configuration */ - struct isif_fmt_cfg cfg; - /* Formatter program entries length */ - struct isif_fmtplen plen; - /* first pixel in a line fed to formatter */ - __u16 fmtrlen; - /* HD interval for output line. Only valid when split line */ - __u16 fmthcnt; - /* formatter address pointers */ - struct isif_fmt_addr_ptr fmtaddr_ptr[16]; - /* program enable/disable */ - __u8 pgm_en[32]; - /* program address pointers */ - struct isif_fmtpgm_ap fmtpgm_ap[32]; -}; - -struct isif_df_csc { - /* Color Space Conversion configuration, 0 - csc, 1 - df */ - __u8 df_or_csc; - /* csc configuration valid if df_or_csc is 0 */ - struct isif_color_space_conv csc; - /* data formatter configuration valid if df_or_csc is 1 */ - struct isif_data_formatter df; - /* start pixel in a line at the input */ - __u32 start_pix; - /* number of pixels in input line */ - __u32 num_pixels; - /* start line at the input */ - __u32 start_line; - /* number of lines at the input */ - __u32 num_lines; -}; - -struct isif_gain_offsets_adj { - /* Gain adjustment per color */ - struct isif_gain gain; - /* Offset adjustment */ - __u16 offset; - /* Enable or Disable Gain adjustment for SDRAM data */ - __u8 gain_sdram_en; - /* Enable or Disable Gain adjustment for IPIPE data */ - __u8 gain_ipipe_en; - /* Enable or Disable Gain adjustment for H3A data */ - __u8 gain_h3a_en; - /* Enable or Disable Gain adjustment for SDRAM data */ - __u8 offset_sdram_en; - /* Enable or Disable Gain adjustment for IPIPE data */ - __u8 offset_ipipe_en; - /* Enable or Disable Gain adjustment for H3A data */ - __u8 offset_h3a_en; -}; - -struct isif_cul { - /* Horizontal Cull pattern for odd lines */ - __u8 hcpat_odd; - /* Horizontal Cull pattern for even lines */ - __u8 hcpat_even; - /* Vertical Cull pattern */ - __u8 vcpat; - /* Enable or disable lpf. Apply when cull is enabled */ - __u8 en_lpf; -}; - -struct isif_compress { -#define ISIF_ALAW 0 -#define ISIF_DPCM 1 -#define ISIF_NO_COMPRESSION 2 - /* Compression Algorithm used */ - __u8 alg; - /* Choose Predictor1 for DPCM compression */ -#define ISIF_DPCM_PRED1 0 - /* Choose Predictor2 for DPCM compression */ -#define ISIF_DPCM_PRED2 1 - /* Predictor for DPCM compression */ - __u8 pred; -}; - -/* all the stuff in this struct will be provided by userland */ -struct isif_config_params_raw { - /* Linearization parameters for image sensor data input */ - struct isif_linearize linearize; - /* Data formatter or CSC */ - struct isif_df_csc df_csc; - /* Defect Pixel Correction (DFC) configuration */ - struct isif_dfc dfc; - /* Black/Digital Clamp configuration */ - struct isif_black_clamp bclamp; - /* Gain, offset adjustments */ - struct isif_gain_offsets_adj gain_offset; - /* Culling */ - struct isif_cul culling; - /* A-Law and DPCM compression options */ - struct isif_compress compress; - /* horizontal offset for Gain/LSC/DFC */ - __u16 horz_offset; - /* vertical offset for Gain/LSC/DFC */ - __u16 vert_offset; - /* color pattern for field 0 */ - struct isif_col_pat col_pat_field0; - /* color pattern for field 1 */ - struct isif_col_pat col_pat_field1; -#define ISIF_NO_SHIFT 0 -#define ISIF_1BIT_SHIFT 1 -#define ISIF_2BIT_SHIFT 2 -#define ISIF_3BIT_SHIFT 3 -#define ISIF_4BIT_SHIFT 4 -#define ISIF_5BIT_SHIFT 5 -#define ISIF_6BIT_SHIFT 6 - /* Data shift applied before storing to SDRAM */ - __u8 data_shift; - /* enable input test pattern generation */ - __u8 test_pat_gen; -}; - -#ifdef __KERNEL__ -struct isif_ycbcr_config { - /* isif pixel format */ - enum ccdc_pixfmt pix_fmt; - /* isif frame format */ - enum ccdc_frmfmt frm_fmt; - /* ISIF crop window */ - struct v4l2_rect win; - /* field polarity */ - enum vpfe_pin_pol fid_pol; - /* interface VD polarity */ - enum vpfe_pin_pol vd_pol; - /* interface HD polarity */ - enum vpfe_pin_pol hd_pol; - /* isif pix order. Only used for ycbcr capture */ - enum ccdc_pixorder pix_order; - /* isif buffer type. Only used for ycbcr capture */ - enum ccdc_buftype buf_type; -}; - -/* MSB of image data connected to sensor port */ -enum isif_data_msb { - ISIF_BIT_MSB_15, - ISIF_BIT_MSB_14, - ISIF_BIT_MSB_13, - ISIF_BIT_MSB_12, - ISIF_BIT_MSB_11, - ISIF_BIT_MSB_10, - ISIF_BIT_MSB_9, - ISIF_BIT_MSB_8, - ISIF_BIT_MSB_7 -}; - -enum isif_cfa_pattern { - ISIF_CFA_PAT_MOSAIC, - ISIF_CFA_PAT_STRIPE -}; - -struct isif_params_raw { - /* isif pixel format */ - enum ccdc_pixfmt pix_fmt; - /* isif frame format */ - enum ccdc_frmfmt frm_fmt; - /* video window */ - struct v4l2_rect win; - /* field polarity */ - enum vpfe_pin_pol fid_pol; - /* interface VD polarity */ - enum vpfe_pin_pol vd_pol; - /* interface HD polarity */ - enum vpfe_pin_pol hd_pol; - /* buffer type. Applicable for interlaced mode */ - enum ccdc_buftype buf_type; - /* Gain values */ - struct isif_gain gain; - /* cfa pattern */ - enum isif_cfa_pattern cfa_pat; - /* Data MSB position */ - enum isif_data_msb data_msb; - /* Enable horizontal flip */ - unsigned char horz_flip_en; - /* Enable image invert vertically */ - unsigned char image_invert_en; - - /* all the userland defined stuff*/ - struct isif_config_params_raw config_params; -}; - -enum isif_data_pack { - ISIF_PACK_16BIT, - ISIF_PACK_12BIT, - ISIF_PACK_8BIT -}; - -#define ISIF_WIN_NTSC {0, 0, 720, 480} -#define ISIF_WIN_VGA {0, 0, 640, 480} - -#endif -#endif diff --git a/drivers/staging/media/deprecated/vpfe_capture/isif_regs.h b/drivers/staging/media/deprecated/vpfe_capture/isif_regs.h deleted file mode 100644 index d68d38841ae7..000000000000 --- a/drivers/staging/media/deprecated/vpfe_capture/isif_regs.h +++ /dev/null @@ -1,256 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-or-later */ -/* - * Copyright (C) 2008-2009 Texas Instruments Inc - */ -#ifndef _ISIF_REGS_H -#define _ISIF_REGS_H - -/* ISIF registers relative offsets */ -#define SYNCEN 0x00 -#define MODESET 0x04 -#define HDW 0x08 -#define VDW 0x0c -#define PPLN 0x10 -#define LPFR 0x14 -#define SPH 0x18 -#define LNH 0x1c -#define SLV0 0x20 -#define SLV1 0x24 -#define LNV 0x28 -#define CULH 0x2c -#define CULV 0x30 -#define HSIZE 0x34 -#define SDOFST 0x38 -#define CADU 0x3c -#define CADL 0x40 -#define LINCFG0 0x44 -#define LINCFG1 0x48 -#define CCOLP 0x4c -#define CRGAIN 0x50 -#define CGRGAIN 0x54 -#define CGBGAIN 0x58 -#define CBGAIN 0x5c -#define COFSTA 0x60 -#define FLSHCFG0 0x64 -#define FLSHCFG1 0x68 -#define FLSHCFG2 0x6c -#define VDINT0 0x70 -#define VDINT1 0x74 -#define VDINT2 0x78 -#define MISC 0x7c -#define CGAMMAWD 0x80 -#define REC656IF 0x84 -#define CCDCFG 0x88 -/***************************************************** -* Defect Correction registers -*****************************************************/ -#define DFCCTL 0x8c -#define VDFSATLV 0x90 -#define DFCMEMCTL 0x94 -#define DFCMEM0 0x98 -#define DFCMEM1 0x9c -#define DFCMEM2 0xa0 -#define DFCMEM3 0xa4 -#define DFCMEM4 0xa8 -/**************************************************** -* Black Clamp registers -****************************************************/ -#define CLAMPCFG 0xac -#define CLDCOFST 0xb0 -#define CLSV 0xb4 -#define CLHWIN0 0xb8 -#define CLHWIN1 0xbc -#define CLHWIN2 0xc0 -#define CLVRV 0xc4 -#define CLVWIN0 0xc8 -#define CLVWIN1 0xcc -#define CLVWIN2 0xd0 -#define CLVWIN3 0xd4 -/**************************************************** -* Lense Shading Correction -****************************************************/ -#define DATAHOFST 0xd8 -#define DATAVOFST 0xdc -#define LSCHVAL 0xe0 -#define LSCVVAL 0xe4 -#define TWODLSCCFG 0xe8 -#define TWODLSCOFST 0xec -#define TWODLSCINI 0xf0 -#define TWODLSCGRBU 0xf4 -#define TWODLSCGRBL 0xf8 -#define TWODLSCGROF 0xfc -#define TWODLSCORBU 0x100 -#define TWODLSCORBL 0x104 -#define TWODLSCOROF 0x108 -#define TWODLSCIRQEN 0x10c -#define TWODLSCIRQST 0x110 -/**************************************************** -* Data formatter -****************************************************/ -#define FMTCFG 0x114 -#define FMTPLEN 0x118 -#define FMTSPH 0x11c -#define FMTLNH 0x120 -#define FMTSLV 0x124 -#define FMTLNV 0x128 -#define FMTRLEN 0x12c -#define FMTHCNT 0x130 -#define FMTAPTR_BASE 0x134 -/* Below macro for addresses FMTAPTR0 - FMTAPTR15 */ -#define FMTAPTR(i) (FMTAPTR_BASE + (i * 4)) -#define FMTPGMVF0 0x174 -#define FMTPGMVF1 0x178 -#define FMTPGMAPU0 0x17c -#define FMTPGMAPU1 0x180 -#define FMTPGMAPS0 0x184 -#define FMTPGMAPS1 0x188 -#define FMTPGMAPS2 0x18c -#define FMTPGMAPS3 0x190 -#define FMTPGMAPS4 0x194 -#define FMTPGMAPS5 0x198 -#define FMTPGMAPS6 0x19c -#define FMTPGMAPS7 0x1a0 -/************************************************ -* Color Space Converter -************************************************/ -#define CSCCTL 0x1a4 -#define CSCM0 0x1a8 -#define CSCM1 0x1ac -#define CSCM2 0x1b0 -#define CSCM3 0x1b4 -#define CSCM4 0x1b8 -#define CSCM5 0x1bc -#define CSCM6 0x1c0 -#define CSCM7 0x1c4 -#define OBWIN0 0x1c8 -#define OBWIN1 0x1cc -#define OBWIN2 0x1d0 -#define OBWIN3 0x1d4 -#define OBVAL0 0x1d8 -#define OBVAL1 0x1dc -#define OBVAL2 0x1e0 -#define OBVAL3 0x1e4 -#define OBVAL4 0x1e8 -#define OBVAL5 0x1ec -#define OBVAL6 0x1f0 -#define OBVAL7 0x1f4 -#define CLKCTL 0x1f8 - -/* Masks & Shifts below */ -#define START_PX_HOR_MASK 0x7FFF -#define NUM_PX_HOR_MASK 0x7FFF -#define START_VER_ONE_MASK 0x7FFF -#define START_VER_TWO_MASK 0x7FFF -#define NUM_LINES_VER 0x7FFF - -/* gain - offset masks */ -#define GAIN_INTEGER_SHIFT 9 -#define OFFSET_MASK 0xFFF -#define GAIN_SDRAM_EN_SHIFT 12 -#define GAIN_IPIPE_EN_SHIFT 13 -#define GAIN_H3A_EN_SHIFT 14 -#define OFST_SDRAM_EN_SHIFT 8 -#define OFST_IPIPE_EN_SHIFT 9 -#define OFST_H3A_EN_SHIFT 10 -#define GAIN_OFFSET_EN_MASK 0x7700 - -/* Culling */ -#define CULL_PAT_EVEN_LINE_SHIFT 8 - -/* CCDCFG register */ -#define ISIF_YCINSWP_RAW (0x00 << 4) -#define ISIF_YCINSWP_YCBCR (0x01 << 4) -#define ISIF_CCDCFG_FIDMD_LATCH_VSYNC (0x00 << 6) -#define ISIF_CCDCFG_WENLOG_AND (0x00 << 8) -#define ISIF_CCDCFG_TRGSEL_WEN (0x00 << 9) -#define ISIF_CCDCFG_EXTRG_DISABLE (0x00 << 10) -#define ISIF_LATCH_ON_VSYNC_DISABLE (0x01 << 15) -#define ISIF_LATCH_ON_VSYNC_ENABLE (0x00 << 15) -#define ISIF_DATA_PACK_MASK 3 -#define ISIF_DATA_PACK16 0 -#define ISIF_DATA_PACK12 1 -#define ISIF_DATA_PACK8 2 -#define ISIF_PIX_ORDER_SHIFT 11 -#define ISIF_BW656_ENABLE (0x01 << 5) - -/* MODESET registers */ -#define ISIF_VDHDOUT_INPUT (0x00 << 0) -#define ISIF_INPUT_SHIFT 12 -#define ISIF_RAW_INPUT_MODE 0 -#define ISIF_FID_POL_SHIFT 4 -#define ISIF_HD_POL_SHIFT 3 -#define ISIF_VD_POL_SHIFT 2 -#define ISIF_DATAPOL_NORMAL 0 -#define ISIF_DATAPOL_SHIFT 6 -#define ISIF_EXWEN_DISABLE 0 -#define ISIF_EXWEN_SHIFT 5 -#define ISIF_FRM_FMT_SHIFT 7 -#define ISIF_DATASFT_SHIFT 8 -#define ISIF_LPF_SHIFT 14 -#define ISIF_LPF_MASK 1 - -/* GAMMAWD registers */ -#define ISIF_ALAW_GAMMA_WD_MASK 0xF -#define ISIF_ALAW_GAMMA_WD_SHIFT 1 -#define ISIF_ALAW_ENABLE 1 -#define ISIF_GAMMAWD_CFA_SHIFT 5 - -/* HSIZE registers */ -#define ISIF_HSIZE_FLIP_MASK 1 -#define ISIF_HSIZE_FLIP_SHIFT 12 - -/* MISC registers */ -#define ISIF_DPCM_EN_SHIFT 12 -#define ISIF_DPCM_PREDICTOR_SHIFT 13 - -/* Black clamp related */ -#define ISIF_BC_MODE_COLOR_SHIFT 4 -#define ISIF_HORZ_BC_MODE_SHIFT 1 -#define ISIF_HORZ_BC_WIN_SEL_SHIFT 5 -#define ISIF_HORZ_BC_PIX_LIMIT_SHIFT 6 -#define ISIF_HORZ_BC_WIN_H_SIZE_SHIFT 8 -#define ISIF_HORZ_BC_WIN_V_SIZE_SHIFT 12 -#define ISIF_VERT_BC_RST_VAL_SEL_SHIFT 4 -#define ISIF_VERT_BC_LINE_AVE_COEF_SHIFT 8 - -/* VDFC registers */ -#define ISIF_VDFC_EN_SHIFT 4 -#define ISIF_VDFC_CORR_MOD_SHIFT 5 -#define ISIF_VDFC_CORR_WHOLE_LN_SHIFT 7 -#define ISIF_VDFC_LEVEL_SHFT_SHIFT 8 -#define ISIF_VDFC_POS_MASK 0x1FFF -#define ISIF_DFCMEMCTL_DFCMARST_SHIFT 2 - -/* CSC registers */ -#define ISIF_CSC_COEF_INTEG_MASK 7 -#define ISIF_CSC_COEF_DECIMAL_MASK 0x1f -#define ISIF_CSC_COEF_INTEG_SHIFT 5 -#define ISIF_CSCM_MSB_SHIFT 8 -#define ISIF_DF_CSC_SPH_MASK 0x1FFF -#define ISIF_DF_CSC_LNH_MASK 0x1FFF -#define ISIF_DF_CSC_SLV_MASK 0x1FFF -#define ISIF_DF_CSC_LNV_MASK 0x1FFF -#define ISIF_DF_NUMLINES 0x7FFF -#define ISIF_DF_NUMPIX 0x1FFF - -/* Offsets for LSC/DFC/Gain */ -#define ISIF_DATA_H_OFFSET_MASK 0x1FFF -#define ISIF_DATA_V_OFFSET_MASK 0x1FFF - -/* Linearization */ -#define ISIF_LIN_CORRSFT_SHIFT 4 -#define ISIF_LIN_SCALE_FACT_INTEG_SHIFT 10 - - -/* Pattern registers */ -#define ISIF_PG_EN (1 << 3) -#define ISIF_SEL_PG_SRC (3 << 4) -#define ISIF_PG_VD_POL_SHIFT 0 -#define ISIF_PG_HD_POL_SHIFT 1 - -/*random other junk*/ -#define ISIF_SYNCEN_VDHDEN_MASK (1 << 0) -#define ISIF_SYNCEN_WEN_MASK (1 << 1) -#define ISIF_SYNCEN_WEN_SHIFT 1 - -#endif diff --git a/drivers/staging/media/deprecated/vpfe_capture/vpfe_capture.c b/drivers/staging/media/deprecated/vpfe_capture/vpfe_capture.c deleted file mode 100644 index 0a2226b321d7..000000000000 --- a/drivers/staging/media/deprecated/vpfe_capture/vpfe_capture.c +++ /dev/null @@ -1,1902 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/* - * Copyright (C) 2008-2009 Texas Instruments Inc - * - * Driver name : VPFE Capture driver - * VPFE Capture driver allows applications to capture and stream video - * frames on DaVinci SoCs (DM6446, DM355 etc) from a YUV source such as - * TVP5146 or Raw Bayer RGB image data from an image sensor - * such as Microns' MT9T001, MT9T031 etc. - * - * These SoCs have, in common, a Video Processing Subsystem (VPSS) that - * consists of a Video Processing Front End (VPFE) for capturing - * video/raw image data and Video Processing Back End (VPBE) for displaying - * YUV data through an in-built analog encoder or Digital LCD port. This - * driver is for capture through VPFE. A typical EVM using these SoCs have - * following high level configuration. - * - * decoder(TVP5146/ YUV/ - * MT9T001) --> Raw Bayer RGB ---> MUX -> VPFE (CCDC/ISIF) - * data input | | - * V | - * SDRAM | - * V - * Image Processor - * | - * V - * SDRAM - * The data flow happens from a decoder connected to the VPFE over a - * YUV embedded (BT.656/BT.1120) or separate sync or raw bayer rgb interface - * and to the input of VPFE through an optional MUX (if more inputs are - * to be interfaced on the EVM). The input data is first passed through - * CCDC (CCD Controller, a.k.a Image Sensor Interface, ISIF). The CCDC - * does very little or no processing on YUV data and does pre-process Raw - * Bayer RGB data through modules such as Defect Pixel Correction (DFC) - * Color Space Conversion (CSC), data gain/offset etc. After this, data - * can be written to SDRAM or can be connected to the image processing - * block such as IPIPE (on DM355 only). - * - * Features supported - * - MMAP IO - * - Capture using TVP5146 over BT.656 - * - support for interfacing decoders using sub device model - * - Work with DM355 or DM6446 CCDC to do Raw Bayer RGB/YUV - * data capture to SDRAM. - * TODO list - * - Support multiple REQBUF after open - * - Support for de-allocating buffers through REQBUF - * - Support for Raw Bayer RGB capture - * - Support for chaining Image Processor - * - Support for static allocation of buffers - * - Support for USERPTR IO - * - Support for STREAMON before QBUF - * - Support for control ioctls - */ -#include -#include -#include -#include -#include -#include -#include -#include -#include "ccdc_hw_device.h" - -static int debug; -static u32 numbuffers = 3; -static u32 bufsize = (720 * 576 * 2); - -module_param(numbuffers, uint, S_IRUGO); -module_param(bufsize, uint, S_IRUGO); -module_param(debug, int, 0644); - -MODULE_PARM_DESC(numbuffers, "buffer count (default:3)"); -MODULE_PARM_DESC(bufsize, "buffer size in bytes (default:720 x 576 x 2)"); -MODULE_PARM_DESC(debug, "Debug level 0-1"); - -MODULE_DESCRIPTION("VPFE Video for Linux Capture Driver"); -MODULE_LICENSE("GPL"); -MODULE_AUTHOR("Texas Instruments"); - -/* standard information */ -struct vpfe_standard { - v4l2_std_id std_id; - unsigned int width; - unsigned int height; - struct v4l2_fract pixelaspect; - /* 0 - progressive, 1 - interlaced */ - int frame_format; -}; - -/* ccdc configuration */ -struct ccdc_config { - /* This make sure vpfe is probed and ready to go */ - int vpfe_probed; - /* name of ccdc device */ - char name[32]; -}; - -/* data structures */ -static struct vpfe_config_params config_params = { - .min_numbuffers = 3, - .numbuffers = 3, - .min_bufsize = 720 * 480 * 2, - .device_bufsize = 720 * 576 * 2, -}; - -/* ccdc device registered */ -static const struct ccdc_hw_device *ccdc_dev; -/* lock for accessing ccdc information */ -static DEFINE_MUTEX(ccdc_lock); -/* ccdc configuration */ -static struct ccdc_config *ccdc_cfg; - -static const struct vpfe_standard vpfe_standards[] = { - {V4L2_STD_525_60, 720, 480, {11, 10}, 1}, - {V4L2_STD_625_50, 720, 576, {54, 59}, 1}, -}; - -/* Used when raw Bayer image from ccdc is directly captured to SDRAM */ -static const struct vpfe_pixel_format vpfe_pix_fmts[] = { - { - .pixelformat = V4L2_PIX_FMT_SBGGR8, - .bpp = 1, - }, - { - .pixelformat = V4L2_PIX_FMT_SBGGR16, - .bpp = 2, - }, - { - .pixelformat = V4L2_PIX_FMT_SGRBG10DPCM8, - .bpp = 1, - }, - { - .pixelformat = V4L2_PIX_FMT_UYVY, - .bpp = 2, - }, - { - .pixelformat = V4L2_PIX_FMT_YUYV, - .bpp = 2, - }, - { - .pixelformat = V4L2_PIX_FMT_NV12, - .bpp = 1, - }, -}; - -/* - * vpfe_lookup_pix_format() - * lookup an entry in the vpfe pix format table based on pix_format - */ -static const struct vpfe_pixel_format *vpfe_lookup_pix_format(u32 pix_format) -{ - int i; - - for (i = 0; i < ARRAY_SIZE(vpfe_pix_fmts); i++) { - if (pix_format == vpfe_pix_fmts[i].pixelformat) - return &vpfe_pix_fmts[i]; - } - return NULL; -} - -/* - * vpfe_register_ccdc_device. CCDC module calls this to - * register with vpfe capture - */ -int vpfe_register_ccdc_device(const struct ccdc_hw_device *dev) -{ - int ret = 0; - printk(KERN_NOTICE "vpfe_register_ccdc_device: %s\n", dev->name); - - if (!dev->hw_ops.open || - !dev->hw_ops.enable || - !dev->hw_ops.set_hw_if_params || - !dev->hw_ops.configure || - !dev->hw_ops.set_buftype || - !dev->hw_ops.get_buftype || - !dev->hw_ops.enum_pix || - !dev->hw_ops.set_frame_format || - !dev->hw_ops.get_frame_format || - !dev->hw_ops.get_pixel_format || - !dev->hw_ops.set_pixel_format || - !dev->hw_ops.set_image_window || - !dev->hw_ops.get_image_window || - !dev->hw_ops.get_line_length || - !dev->hw_ops.getfid) - return -EINVAL; - - mutex_lock(&ccdc_lock); - if (!ccdc_cfg) { - /* - * TODO. Will this ever happen? if so, we need to fix it. - * Probably we need to add the request to a linked list and - * walk through it during vpfe probe - */ - printk(KERN_ERR "vpfe capture not initialized\n"); - ret = -EFAULT; - goto unlock; - } - - if (strcmp(dev->name, ccdc_cfg->name)) { - /* ignore this ccdc */ - ret = -EINVAL; - goto unlock; - } - - if (ccdc_dev) { - printk(KERN_ERR "ccdc already registered\n"); - ret = -EINVAL; - goto unlock; - } - - ccdc_dev = dev; -unlock: - mutex_unlock(&ccdc_lock); - return ret; -} -EXPORT_SYMBOL(vpfe_register_ccdc_device); - -/* - * vpfe_unregister_ccdc_device. CCDC module calls this to - * unregister with vpfe capture - */ -void vpfe_unregister_ccdc_device(const struct ccdc_hw_device *dev) -{ - if (!dev) { - printk(KERN_ERR "invalid ccdc device ptr\n"); - return; - } - - printk(KERN_NOTICE "vpfe_unregister_ccdc_device, dev->name = %s\n", - dev->name); - - if (strcmp(dev->name, ccdc_cfg->name)) { - /* ignore this ccdc */ - return; - } - - mutex_lock(&ccdc_lock); - ccdc_dev = NULL; - mutex_unlock(&ccdc_lock); -} -EXPORT_SYMBOL(vpfe_unregister_ccdc_device); - -/* - * vpfe_config_ccdc_image_format() - * For a pix format, configure ccdc to setup the capture - */ -static int vpfe_config_ccdc_image_format(struct vpfe_device *vpfe_dev) -{ - enum ccdc_frmfmt frm_fmt = CCDC_FRMFMT_INTERLACED; - int ret = 0; - - if (ccdc_dev->hw_ops.set_pixel_format( - vpfe_dev->fmt.fmt.pix.pixelformat) < 0) { - v4l2_err(&vpfe_dev->v4l2_dev, - "couldn't set pix format in ccdc\n"); - return -EINVAL; - } - /* configure the image window */ - ccdc_dev->hw_ops.set_image_window(&vpfe_dev->crop); - - switch (vpfe_dev->fmt.fmt.pix.field) { - case V4L2_FIELD_INTERLACED: - /* do nothing, since it is default */ - ret = ccdc_dev->hw_ops.set_buftype( - CCDC_BUFTYPE_FLD_INTERLEAVED); - break; - case V4L2_FIELD_NONE: - frm_fmt = CCDC_FRMFMT_PROGRESSIVE; - /* buffer type only applicable for interlaced scan */ - break; - case V4L2_FIELD_SEQ_TB: - ret = ccdc_dev->hw_ops.set_buftype( - CCDC_BUFTYPE_FLD_SEPARATED); - break; - default: - return -EINVAL; - } - - /* set the frame format */ - if (!ret) - ret = ccdc_dev->hw_ops.set_frame_format(frm_fmt); - return ret; -} -/* - * vpfe_config_image_format() - * For a given standard, this functions sets up the default - * pix format & crop values in the vpfe device and ccdc. It first - * starts with defaults based values from the standard table. - * It then checks if sub device supports get_fmt and then override the - * values based on that.Sets crop values to match with scan resolution - * starting at 0,0. It calls vpfe_config_ccdc_image_format() set the - * values in ccdc - */ -static int vpfe_config_image_format(struct vpfe_device *vpfe_dev, - v4l2_std_id std_id) -{ - struct vpfe_subdev_info *sdinfo = vpfe_dev->current_subdev; - struct v4l2_subdev_format fmt = { - .which = V4L2_SUBDEV_FORMAT_ACTIVE, - }; - struct v4l2_mbus_framefmt *mbus_fmt = &fmt.format; - struct v4l2_pix_format *pix = &vpfe_dev->fmt.fmt.pix; - int i, ret; - - for (i = 0; i < ARRAY_SIZE(vpfe_standards); i++) { - if (vpfe_standards[i].std_id & std_id) { - vpfe_dev->std_info.active_pixels = - vpfe_standards[i].width; - vpfe_dev->std_info.active_lines = - vpfe_standards[i].height; - vpfe_dev->std_info.frame_format = - vpfe_standards[i].frame_format; - vpfe_dev->std_index = i; - break; - } - } - - if (i == ARRAY_SIZE(vpfe_standards)) { - v4l2_err(&vpfe_dev->v4l2_dev, "standard not supported\n"); - return -EINVAL; - } - - vpfe_dev->crop.top = 0; - vpfe_dev->crop.left = 0; - vpfe_dev->crop.width = vpfe_dev->std_info.active_pixels; - vpfe_dev->crop.height = vpfe_dev->std_info.active_lines; - pix->width = vpfe_dev->crop.width; - pix->height = vpfe_dev->crop.height; - - /* first field and frame format based on standard frame format */ - if (vpfe_dev->std_info.frame_format) { - pix->field = V4L2_FIELD_INTERLACED; - /* assume V4L2_PIX_FMT_UYVY as default */ - pix->pixelformat = V4L2_PIX_FMT_UYVY; - v4l2_fill_mbus_format(mbus_fmt, pix, - MEDIA_BUS_FMT_YUYV10_2X10); - } else { - pix->field = V4L2_FIELD_NONE; - /* assume V4L2_PIX_FMT_SBGGR8 */ - pix->pixelformat = V4L2_PIX_FMT_SBGGR8; - v4l2_fill_mbus_format(mbus_fmt, pix, - MEDIA_BUS_FMT_SBGGR8_1X8); - } - - /* if sub device supports get_fmt, override the defaults */ - ret = v4l2_device_call_until_err(&vpfe_dev->v4l2_dev, - sdinfo->grp_id, pad, get_fmt, NULL, &fmt); - - if (ret && ret != -ENOIOCTLCMD) { - v4l2_err(&vpfe_dev->v4l2_dev, - "error in getting get_fmt from sub device\n"); - return ret; - } - v4l2_fill_pix_format(pix, mbus_fmt); - pix->bytesperline = pix->width * 2; - pix->sizeimage = pix->bytesperline * pix->height; - - /* Sets the values in CCDC */ - ret = vpfe_config_ccdc_image_format(vpfe_dev); - if (ret) - return ret; - - /* Update the values of sizeimage and bytesperline */ - pix->bytesperline = ccdc_dev->hw_ops.get_line_length(); - pix->sizeimage = pix->bytesperline * pix->height; - - return 0; -} - -static int vpfe_initialize_device(struct vpfe_device *vpfe_dev) -{ - int ret; - - /* set first input of current subdevice as the current input */ - vpfe_dev->current_input = 0; - - /* set default standard */ - vpfe_dev->std_index = 0; - - /* Configure the default format information */ - ret = vpfe_config_image_format(vpfe_dev, - vpfe_standards[vpfe_dev->std_index].std_id); - if (ret) - return ret; - - /* now open the ccdc device to initialize it */ - mutex_lock(&ccdc_lock); - if (!ccdc_dev) { - v4l2_err(&vpfe_dev->v4l2_dev, "ccdc device not registered\n"); - ret = -ENODEV; - goto unlock; - } - - if (!try_module_get(ccdc_dev->owner)) { - v4l2_err(&vpfe_dev->v4l2_dev, "Couldn't lock ccdc module\n"); - ret = -ENODEV; - goto unlock; - } - ret = ccdc_dev->hw_ops.open(vpfe_dev->pdev); - if (!ret) - vpfe_dev->initialized = 1; - - /* Clear all VPFE/CCDC interrupts */ - if (vpfe_dev->cfg->clr_intr) - vpfe_dev->cfg->clr_intr(-1); - -unlock: - mutex_unlock(&ccdc_lock); - return ret; -} - -/* - * vpfe_open : It creates object of file handle structure and - * stores it in private_data member of filepointer - */ -static int vpfe_open(struct file *file) -{ - struct vpfe_device *vpfe_dev = video_drvdata(file); - struct video_device *vdev = video_devdata(file); - struct vpfe_fh *fh; - - v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_open\n"); - - if (!vpfe_dev->cfg->num_subdevs) { - v4l2_err(&vpfe_dev->v4l2_dev, "No decoder registered\n"); - return -ENODEV; - } - - /* Allocate memory for the file handle object */ - fh = kmalloc(sizeof(*fh), GFP_KERNEL); - if (!fh) - return -ENOMEM; - - /* store pointer to fh in private_data member of file */ - file->private_data = fh; - fh->vpfe_dev = vpfe_dev; - v4l2_fh_init(&fh->fh, vdev); - mutex_lock(&vpfe_dev->lock); - /* If decoder is not initialized. initialize it */ - if (!vpfe_dev->initialized) { - if (vpfe_initialize_device(vpfe_dev)) { - mutex_unlock(&vpfe_dev->lock); - v4l2_fh_exit(&fh->fh); - kfree(fh); - return -ENODEV; - } - } - /* Increment device usrs counter */ - vpfe_dev->usrs++; - /* Set io_allowed member to false */ - fh->io_allowed = 0; - v4l2_fh_add(&fh->fh); - mutex_unlock(&vpfe_dev->lock); - return 0; -} - -static void vpfe_schedule_next_buffer(struct vpfe_device *vpfe_dev) -{ - unsigned long addr; - - vpfe_dev->next_frm = list_entry(vpfe_dev->dma_queue.next, - struct videobuf_buffer, queue); - list_del(&vpfe_dev->next_frm->queue); - vpfe_dev->next_frm->state = VIDEOBUF_ACTIVE; - addr = videobuf_to_dma_contig(vpfe_dev->next_frm); - - ccdc_dev->hw_ops.setfbaddr(addr); -} - -static void vpfe_schedule_bottom_field(struct vpfe_device *vpfe_dev) -{ - unsigned long addr; - - addr = videobuf_to_dma_contig(vpfe_dev->cur_frm); - addr += vpfe_dev->field_off; - ccdc_dev->hw_ops.setfbaddr(addr); -} - -static void vpfe_process_buffer_complete(struct vpfe_device *vpfe_dev) -{ - vpfe_dev->cur_frm->ts = ktime_get_ns(); - vpfe_dev->cur_frm->state = VIDEOBUF_DONE; - vpfe_dev->cur_frm->size = vpfe_dev->fmt.fmt.pix.sizeimage; - wake_up_interruptible(&vpfe_dev->cur_frm->done); - vpfe_dev->cur_frm = vpfe_dev->next_frm; -} - -/* ISR for VINT0*/ -static irqreturn_t vpfe_isr(int irq, void *dev_id) -{ - struct vpfe_device *vpfe_dev = dev_id; - enum v4l2_field field; - int fid; - - v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "\nStarting vpfe_isr...\n"); - field = vpfe_dev->fmt.fmt.pix.field; - - /* if streaming not started, don't do anything */ - if (!vpfe_dev->started) - goto clear_intr; - - /* only for 6446 this will be applicable */ - if (ccdc_dev->hw_ops.reset) - ccdc_dev->hw_ops.reset(); - - if (field == V4L2_FIELD_NONE) { - /* handle progressive frame capture */ - v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, - "frame format is progressive...\n"); - if (vpfe_dev->cur_frm != vpfe_dev->next_frm) - vpfe_process_buffer_complete(vpfe_dev); - goto clear_intr; - } - - /* interlaced or TB capture check which field we are in hardware */ - fid = ccdc_dev->hw_ops.getfid(); - - /* switch the software maintained field id */ - vpfe_dev->field_id ^= 1; - v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "field id = %x:%x.\n", - fid, vpfe_dev->field_id); - if (fid == vpfe_dev->field_id) { - /* we are in-sync here,continue */ - if (fid == 0) { - /* - * One frame is just being captured. If the next frame - * is available, release the current frame and move on - */ - if (vpfe_dev->cur_frm != vpfe_dev->next_frm) - vpfe_process_buffer_complete(vpfe_dev); - /* - * based on whether the two fields are stored - * interleavely or separately in memory, reconfigure - * the CCDC memory address - */ - if (field == V4L2_FIELD_SEQ_TB) - vpfe_schedule_bottom_field(vpfe_dev); - goto clear_intr; - } - /* - * if one field is just being captured configure - * the next frame get the next frame from the empty - * queue if no frame is available hold on to the - * current buffer - */ - spin_lock(&vpfe_dev->dma_queue_lock); - if (!list_empty(&vpfe_dev->dma_queue) && - vpfe_dev->cur_frm == vpfe_dev->next_frm) - vpfe_schedule_next_buffer(vpfe_dev); - spin_unlock(&vpfe_dev->dma_queue_lock); - } else if (fid == 0) { - /* - * out of sync. Recover from any hardware out-of-sync. - * May loose one frame - */ - vpfe_dev->field_id = fid; - } -clear_intr: - if (vpfe_dev->cfg->clr_intr) - vpfe_dev->cfg->clr_intr(irq); - - return IRQ_HANDLED; -} - -/* vdint1_isr - isr handler for VINT1 interrupt */ -static irqreturn_t vdint1_isr(int irq, void *dev_id) -{ - struct vpfe_device *vpfe_dev = dev_id; - - v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "\nInside vdint1_isr...\n"); - - /* if streaming not started, don't do anything */ - if (!vpfe_dev->started) { - if (vpfe_dev->cfg->clr_intr) - vpfe_dev->cfg->clr_intr(irq); - return IRQ_HANDLED; - } - - spin_lock(&vpfe_dev->dma_queue_lock); - if ((vpfe_dev->fmt.fmt.pix.field == V4L2_FIELD_NONE) && - !list_empty(&vpfe_dev->dma_queue) && - vpfe_dev->cur_frm == vpfe_dev->next_frm) - vpfe_schedule_next_buffer(vpfe_dev); - spin_unlock(&vpfe_dev->dma_queue_lock); - - if (vpfe_dev->cfg->clr_intr) - vpfe_dev->cfg->clr_intr(irq); - - return IRQ_HANDLED; -} - -static void vpfe_detach_irq(struct vpfe_device *vpfe_dev) -{ - enum ccdc_frmfmt frame_format; - - frame_format = ccdc_dev->hw_ops.get_frame_format(); - if (frame_format == CCDC_FRMFMT_PROGRESSIVE) - free_irq(vpfe_dev->ccdc_irq1, vpfe_dev); -} - -static int vpfe_attach_irq(struct vpfe_device *vpfe_dev) -{ - enum ccdc_frmfmt frame_format; - - frame_format = ccdc_dev->hw_ops.get_frame_format(); - if (frame_format == CCDC_FRMFMT_PROGRESSIVE) { - return request_irq(vpfe_dev->ccdc_irq1, vdint1_isr, - 0, "vpfe_capture1", - vpfe_dev); - } - return 0; -} - -/* vpfe_stop_ccdc_capture: stop streaming in ccdc/isif */ -static void vpfe_stop_ccdc_capture(struct vpfe_device *vpfe_dev) -{ - vpfe_dev->started = 0; - ccdc_dev->hw_ops.enable(0); - if (ccdc_dev->hw_ops.enable_out_to_sdram) - ccdc_dev->hw_ops.enable_out_to_sdram(0); -} - -/* - * vpfe_release : This function deletes buffer queue, frees the - * buffers and the vpfe file handle - */ -static int vpfe_release(struct file *file) -{ - struct vpfe_device *vpfe_dev = video_drvdata(file); - struct vpfe_fh *fh = file->private_data; - struct vpfe_subdev_info *sdinfo; - int ret; - - v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_release\n"); - - /* Get the device lock */ - mutex_lock(&vpfe_dev->lock); - /* if this instance is doing IO */ - if (fh->io_allowed) { - if (vpfe_dev->started) { - sdinfo = vpfe_dev->current_subdev; - ret = v4l2_device_call_until_err(&vpfe_dev->v4l2_dev, - sdinfo->grp_id, - video, s_stream, 0); - if (ret && (ret != -ENOIOCTLCMD)) - v4l2_err(&vpfe_dev->v4l2_dev, - "stream off failed in subdev\n"); - vpfe_stop_ccdc_capture(vpfe_dev); - vpfe_detach_irq(vpfe_dev); - videobuf_streamoff(&vpfe_dev->buffer_queue); - } - vpfe_dev->io_usrs = 0; - vpfe_dev->numbuffers = config_params.numbuffers; - videobuf_stop(&vpfe_dev->buffer_queue); - videobuf_mmap_free(&vpfe_dev->buffer_queue); - } - - /* Decrement device usrs counter */ - vpfe_dev->usrs--; - v4l2_fh_del(&fh->fh); - v4l2_fh_exit(&fh->fh); - /* If this is the last file handle */ - if (!vpfe_dev->usrs) { - vpfe_dev->initialized = 0; - if (ccdc_dev->hw_ops.close) - ccdc_dev->hw_ops.close(vpfe_dev->pdev); - module_put(ccdc_dev->owner); - } - mutex_unlock(&vpfe_dev->lock); - file->private_data = NULL; - /* Free memory allocated to file handle object */ - kfree(fh); - return 0; -} - -/* - * vpfe_mmap : It is used to map kernel space buffers - * into user spaces - */ -static int vpfe_mmap(struct file *file, struct vm_area_struct *vma) -{ - /* Get the device object and file handle object */ - struct vpfe_device *vpfe_dev = video_drvdata(file); - - v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_mmap\n"); - - return videobuf_mmap_mapper(&vpfe_dev->buffer_queue, vma); -} - -/* - * vpfe_poll: It is used for select/poll system call - */ -static __poll_t vpfe_poll(struct file *file, poll_table *wait) -{ - struct vpfe_device *vpfe_dev = video_drvdata(file); - - v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_poll\n"); - - if (vpfe_dev->started) - return videobuf_poll_stream(file, - &vpfe_dev->buffer_queue, wait); - return 0; -} - -/* vpfe capture driver file operations */ -static const struct v4l2_file_operations vpfe_fops = { - .owner = THIS_MODULE, - .open = vpfe_open, - .release = vpfe_release, - .unlocked_ioctl = video_ioctl2, - .mmap = vpfe_mmap, - .poll = vpfe_poll -}; - -/* - * vpfe_check_format() - * This function adjust the input pixel format as per hardware - * capabilities and update the same in pixfmt. - * Following algorithm used :- - * - * If given pixformat is not in the vpfe list of pix formats or not - * supported by the hardware, current value of pixformat in the device - * is used - * If given field is not supported, then current field is used. If field - * is different from current, then it is matched with that from sub device. - * Minimum height is 2 lines for interlaced or tb field and 1 line for - * progressive. Maximum height is clamped to active active lines of scan - * Minimum width is 32 bytes in memory and width is clamped to active - * pixels of scan. - * bytesperline is a multiple of 32. - */ -static const struct vpfe_pixel_format * - vpfe_check_format(struct vpfe_device *vpfe_dev, - struct v4l2_pix_format *pixfmt) -{ - u32 min_height = 1, min_width = 32, max_width, max_height; - const struct vpfe_pixel_format *vpfe_pix_fmt; - u32 pix; - int temp, found; - - vpfe_pix_fmt = vpfe_lookup_pix_format(pixfmt->pixelformat); - if (!vpfe_pix_fmt) { - /* - * use current pixel format in the vpfe device. We - * will find this pix format in the table - */ - pixfmt->pixelformat = vpfe_dev->fmt.fmt.pix.pixelformat; - vpfe_pix_fmt = vpfe_lookup_pix_format(pixfmt->pixelformat); - } - - /* check if hw supports it */ - temp = 0; - found = 0; - while (ccdc_dev->hw_ops.enum_pix(&pix, temp) >= 0) { - if (vpfe_pix_fmt->pixelformat == pix) { - found = 1; - break; - } - temp++; - } - - if (!found) { - /* use current pixel format */ - pixfmt->pixelformat = vpfe_dev->fmt.fmt.pix.pixelformat; - /* - * Since this is currently used in the vpfe device, we - * will find this pix format in the table - */ - vpfe_pix_fmt = vpfe_lookup_pix_format(pixfmt->pixelformat); - } - - /* check what field format is supported */ - if (pixfmt->field == V4L2_FIELD_ANY) { - /* if field is any, use current value as default */ - pixfmt->field = vpfe_dev->fmt.fmt.pix.field; - } - - /* - * if field is not same as current field in the vpfe device - * try matching the field with the sub device field - */ - if (vpfe_dev->fmt.fmt.pix.field != pixfmt->field) { - /* - * If field value is not in the supported fields, use current - * field used in the device as default - */ - switch (pixfmt->field) { - case V4L2_FIELD_INTERLACED: - case V4L2_FIELD_SEQ_TB: - /* if sub device is supporting progressive, use that */ - if (!vpfe_dev->std_info.frame_format) - pixfmt->field = V4L2_FIELD_NONE; - break; - case V4L2_FIELD_NONE: - if (vpfe_dev->std_info.frame_format) - pixfmt->field = V4L2_FIELD_INTERLACED; - break; - - default: - /* use current field as default */ - pixfmt->field = vpfe_dev->fmt.fmt.pix.field; - break; - } - } - - /* Now adjust image resolutions supported */ - if (pixfmt->field == V4L2_FIELD_INTERLACED || - pixfmt->field == V4L2_FIELD_SEQ_TB) - min_height = 2; - - max_width = vpfe_dev->std_info.active_pixels; - max_height = vpfe_dev->std_info.active_lines; - min_width /= vpfe_pix_fmt->bpp; - - v4l2_info(&vpfe_dev->v4l2_dev, "width = %d, height = %d, bpp = %d\n", - pixfmt->width, pixfmt->height, vpfe_pix_fmt->bpp); - - pixfmt->width = clamp((pixfmt->width), min_width, max_width); - pixfmt->height = clamp((pixfmt->height), min_height, max_height); - - /* If interlaced, adjust height to be a multiple of 2 */ - if (pixfmt->field == V4L2_FIELD_INTERLACED) - pixfmt->height &= (~1); - /* - * recalculate bytesperline and sizeimage since width - * and height might have changed - */ - pixfmt->bytesperline = (((pixfmt->width * vpfe_pix_fmt->bpp) + 31) - & ~31); - if (pixfmt->pixelformat == V4L2_PIX_FMT_NV12) - pixfmt->sizeimage = - pixfmt->bytesperline * pixfmt->height + - ((pixfmt->bytesperline * pixfmt->height) >> 1); - else - pixfmt->sizeimage = pixfmt->bytesperline * pixfmt->height; - - v4l2_info(&vpfe_dev->v4l2_dev, "adjusted width = %d, height = %d, bpp = %d, bytesperline = %d, sizeimage = %d\n", - pixfmt->width, pixfmt->height, vpfe_pix_fmt->bpp, - pixfmt->bytesperline, pixfmt->sizeimage); - return vpfe_pix_fmt; -} - -static int vpfe_querycap(struct file *file, void *priv, - struct v4l2_capability *cap) -{ - struct vpfe_device *vpfe_dev = video_drvdata(file); - - v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_querycap\n"); - - strscpy(cap->driver, CAPTURE_DRV_NAME, sizeof(cap->driver)); - strscpy(cap->bus_info, "VPFE", sizeof(cap->bus_info)); - strscpy(cap->card, vpfe_dev->cfg->card_name, sizeof(cap->card)); - return 0; -} - -static int vpfe_g_fmt_vid_cap(struct file *file, void *priv, - struct v4l2_format *fmt) -{ - struct vpfe_device *vpfe_dev = video_drvdata(file); - - v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_g_fmt_vid_cap\n"); - /* Fill in the information about format */ - *fmt = vpfe_dev->fmt; - return 0; -} - -static int vpfe_enum_fmt_vid_cap(struct file *file, void *priv, - struct v4l2_fmtdesc *fmt) -{ - struct vpfe_device *vpfe_dev = video_drvdata(file); - const struct vpfe_pixel_format *pix_fmt; - u32 pix; - - v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_enum_fmt_vid_cap\n"); - - if (ccdc_dev->hw_ops.enum_pix(&pix, fmt->index) < 0) - return -EINVAL; - - /* Fill in the information about format */ - pix_fmt = vpfe_lookup_pix_format(pix); - if (pix_fmt) { - fmt->pixelformat = pix_fmt->pixelformat; - return 0; - } - return -EINVAL; -} - -static int vpfe_s_fmt_vid_cap(struct file *file, void *priv, - struct v4l2_format *fmt) -{ - struct vpfe_device *vpfe_dev = video_drvdata(file); - const struct vpfe_pixel_format *pix_fmts; - int ret; - - v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_s_fmt_vid_cap\n"); - - /* If streaming is started, return error */ - if (vpfe_dev->started) { - v4l2_err(&vpfe_dev->v4l2_dev, "Streaming is started\n"); - return -EBUSY; - } - - /* Check for valid frame format */ - pix_fmts = vpfe_check_format(vpfe_dev, &fmt->fmt.pix); - if (!pix_fmts) - return -EINVAL; - - /* store the pixel format in the device object */ - ret = mutex_lock_interruptible(&vpfe_dev->lock); - if (ret) - return ret; - - /* First detach any IRQ if currently attached */ - vpfe_detach_irq(vpfe_dev); - vpfe_dev->fmt = *fmt; - /* set image capture parameters in the ccdc */ - ret = vpfe_config_ccdc_image_format(vpfe_dev); - mutex_unlock(&vpfe_dev->lock); - return ret; -} - -static int vpfe_try_fmt_vid_cap(struct file *file, void *priv, - struct v4l2_format *f) -{ - struct vpfe_device *vpfe_dev = video_drvdata(file); - const struct vpfe_pixel_format *pix_fmts; - - v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_try_fmt_vid_cap\n"); - - pix_fmts = vpfe_check_format(vpfe_dev, &f->fmt.pix); - if (!pix_fmts) - return -EINVAL; - return 0; -} - -/* - * vpfe_get_subdev_input_index - Get subdev index and subdev input index for a - * given app input index - */ -static int vpfe_get_subdev_input_index(struct vpfe_device *vpfe_dev, - int *subdev_index, - int *subdev_input_index, - int app_input_index) -{ - struct vpfe_config *cfg = vpfe_dev->cfg; - struct vpfe_subdev_info *sdinfo; - int i, j = 0; - - for (i = 0; i < cfg->num_subdevs; i++) { - sdinfo = &cfg->sub_devs[i]; - if (app_input_index < (j + sdinfo->num_inputs)) { - *subdev_index = i; - *subdev_input_index = app_input_index - j; - return 0; - } - j += sdinfo->num_inputs; - } - return -EINVAL; -} - -/* - * vpfe_get_app_input - Get app input index for a given subdev input index - * driver stores the input index of the current sub device and translate it - * when application request the current input - */ -static int vpfe_get_app_input_index(struct vpfe_device *vpfe_dev, - int *app_input_index) -{ - struct vpfe_config *cfg = vpfe_dev->cfg; - struct vpfe_subdev_info *sdinfo; - int i, j = 0; - - for (i = 0; i < cfg->num_subdevs; i++) { - sdinfo = &cfg->sub_devs[i]; - if (!strcmp(sdinfo->name, vpfe_dev->current_subdev->name)) { - if (vpfe_dev->current_input >= sdinfo->num_inputs) - return -1; - *app_input_index = j + vpfe_dev->current_input; - return 0; - } - j += sdinfo->num_inputs; - } - return -EINVAL; -} - -static int vpfe_enum_input(struct file *file, void *priv, - struct v4l2_input *inp) -{ - struct vpfe_device *vpfe_dev = video_drvdata(file); - struct vpfe_subdev_info *sdinfo; - int subdev, index ; - - v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_enum_input\n"); - - if (vpfe_get_subdev_input_index(vpfe_dev, - &subdev, - &index, - inp->index) < 0) { - v4l2_err(&vpfe_dev->v4l2_dev, "input information not found for the subdev\n"); - return -EINVAL; - } - sdinfo = &vpfe_dev->cfg->sub_devs[subdev]; - *inp = sdinfo->inputs[index]; - return 0; -} - -static int vpfe_g_input(struct file *file, void *priv, unsigned int *index) -{ - struct vpfe_device *vpfe_dev = video_drvdata(file); - - v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_g_input\n"); - - return vpfe_get_app_input_index(vpfe_dev, index); -} - - -static int vpfe_s_input(struct file *file, void *priv, unsigned int index) -{ - struct vpfe_device *vpfe_dev = video_drvdata(file); - struct v4l2_subdev *sd; - struct vpfe_subdev_info *sdinfo; - int subdev_index, inp_index; - struct vpfe_route *route; - u32 input, output; - int ret; - - v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_s_input\n"); - - ret = mutex_lock_interruptible(&vpfe_dev->lock); - if (ret) - return ret; - - /* - * If streaming is started return device busy - * error - */ - if (vpfe_dev->started) { - v4l2_err(&vpfe_dev->v4l2_dev, "Streaming is on\n"); - ret = -EBUSY; - goto unlock_out; - } - ret = vpfe_get_subdev_input_index(vpfe_dev, - &subdev_index, - &inp_index, - index); - if (ret < 0) { - v4l2_err(&vpfe_dev->v4l2_dev, "invalid input index\n"); - goto unlock_out; - } - - sdinfo = &vpfe_dev->cfg->sub_devs[subdev_index]; - sd = vpfe_dev->sd[subdev_index]; - route = &sdinfo->routes[inp_index]; - if (route && sdinfo->can_route) { - input = route->input; - output = route->output; - } else { - input = 0; - output = 0; - } - - if (sd) - ret = v4l2_subdev_call(sd, video, s_routing, input, output, 0); - - if (ret) { - v4l2_err(&vpfe_dev->v4l2_dev, - "vpfe_doioctl:error in setting input in decoder\n"); - ret = -EINVAL; - goto unlock_out; - } - vpfe_dev->current_subdev = sdinfo; - if (sd) - vpfe_dev->v4l2_dev.ctrl_handler = sd->ctrl_handler; - vpfe_dev->current_input = index; - vpfe_dev->std_index = 0; - - /* set the bus/interface parameter for the sub device in ccdc */ - ret = ccdc_dev->hw_ops.set_hw_if_params(&sdinfo->ccdc_if_params); - if (ret) - goto unlock_out; - - /* set the default image parameters in the device */ - ret = vpfe_config_image_format(vpfe_dev, - vpfe_standards[vpfe_dev->std_index].std_id); -unlock_out: - mutex_unlock(&vpfe_dev->lock); - return ret; -} - -static int vpfe_querystd(struct file *file, void *priv, v4l2_std_id *std_id) -{ - struct vpfe_device *vpfe_dev = video_drvdata(file); - struct vpfe_subdev_info *sdinfo; - int ret; - - v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_querystd\n"); - - ret = mutex_lock_interruptible(&vpfe_dev->lock); - sdinfo = vpfe_dev->current_subdev; - if (ret) - return ret; - /* Call querystd function of decoder device */ - ret = v4l2_device_call_until_err(&vpfe_dev->v4l2_dev, sdinfo->grp_id, - video, querystd, std_id); - mutex_unlock(&vpfe_dev->lock); - return ret; -} - -static int vpfe_s_std(struct file *file, void *priv, v4l2_std_id std_id) -{ - struct vpfe_device *vpfe_dev = video_drvdata(file); - struct vpfe_subdev_info *sdinfo; - int ret; - - v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_s_std\n"); - - /* Call decoder driver function to set the standard */ - ret = mutex_lock_interruptible(&vpfe_dev->lock); - if (ret) - return ret; - - sdinfo = vpfe_dev->current_subdev; - /* If streaming is started, return device busy error */ - if (vpfe_dev->started) { - v4l2_err(&vpfe_dev->v4l2_dev, "streaming is started\n"); - ret = -EBUSY; - goto unlock_out; - } - - ret = v4l2_device_call_until_err(&vpfe_dev->v4l2_dev, sdinfo->grp_id, - video, s_std, std_id); - if (ret < 0) { - v4l2_err(&vpfe_dev->v4l2_dev, "Failed to set standard\n"); - goto unlock_out; - } - ret = vpfe_config_image_format(vpfe_dev, std_id); - -unlock_out: - mutex_unlock(&vpfe_dev->lock); - return ret; -} - -static int vpfe_g_std(struct file *file, void *priv, v4l2_std_id *std_id) -{ - struct vpfe_device *vpfe_dev = video_drvdata(file); - - v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_g_std\n"); - - *std_id = vpfe_standards[vpfe_dev->std_index].std_id; - return 0; -} -/* - * Videobuf operations - */ -static int vpfe_videobuf_setup(struct videobuf_queue *vq, - unsigned int *count, - unsigned int *size) -{ - struct vpfe_fh *fh = vq->priv_data; - struct vpfe_device *vpfe_dev = fh->vpfe_dev; - - v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_buffer_setup\n"); - *size = vpfe_dev->fmt.fmt.pix.sizeimage; - if (vpfe_dev->memory == V4L2_MEMORY_MMAP && - vpfe_dev->fmt.fmt.pix.sizeimage > config_params.device_bufsize) - *size = config_params.device_bufsize; - - if (*count < config_params.min_numbuffers) - *count = config_params.min_numbuffers; - v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, - "count=%d, size=%d\n", *count, *size); - return 0; -} - -static int vpfe_videobuf_prepare(struct videobuf_queue *vq, - struct videobuf_buffer *vb, - enum v4l2_field field) -{ - struct vpfe_fh *fh = vq->priv_data; - struct vpfe_device *vpfe_dev = fh->vpfe_dev; - unsigned long addr; - int ret; - - v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_buffer_prepare\n"); - - /* If buffer is not initialized, initialize it */ - if (VIDEOBUF_NEEDS_INIT == vb->state) { - vb->width = vpfe_dev->fmt.fmt.pix.width; - vb->height = vpfe_dev->fmt.fmt.pix.height; - vb->size = vpfe_dev->fmt.fmt.pix.sizeimage; - vb->field = field; - - ret = videobuf_iolock(vq, vb, NULL); - if (ret < 0) - return ret; - - addr = videobuf_to_dma_contig(vb); - /* Make sure user addresses are aligned to 32 bytes */ - if (!ALIGN(addr, 32)) - return -EINVAL; - - vb->state = VIDEOBUF_PREPARED; - } - return 0; -} - -static void vpfe_videobuf_queue(struct videobuf_queue *vq, - struct videobuf_buffer *vb) -{ - /* Get the file handle object and device object */ - struct vpfe_fh *fh = vq->priv_data; - struct vpfe_device *vpfe_dev = fh->vpfe_dev; - unsigned long flags; - - v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_buffer_queue\n"); - - /* add the buffer to the DMA queue */ - spin_lock_irqsave(&vpfe_dev->dma_queue_lock, flags); - list_add_tail(&vb->queue, &vpfe_dev->dma_queue); - spin_unlock_irqrestore(&vpfe_dev->dma_queue_lock, flags); - - /* Change state of the buffer */ - vb->state = VIDEOBUF_QUEUED; -} - -static void vpfe_videobuf_release(struct videobuf_queue *vq, - struct videobuf_buffer *vb) -{ - struct vpfe_fh *fh = vq->priv_data; - struct vpfe_device *vpfe_dev = fh->vpfe_dev; - unsigned long flags; - - v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_videobuf_release\n"); - - /* - * We need to flush the buffer from the dma queue since - * they are de-allocated - */ - spin_lock_irqsave(&vpfe_dev->dma_queue_lock, flags); - INIT_LIST_HEAD(&vpfe_dev->dma_queue); - spin_unlock_irqrestore(&vpfe_dev->dma_queue_lock, flags); - videobuf_dma_contig_free(vq, vb); - vb->state = VIDEOBUF_NEEDS_INIT; -} - -static const struct videobuf_queue_ops vpfe_videobuf_qops = { - .buf_setup = vpfe_videobuf_setup, - .buf_prepare = vpfe_videobuf_prepare, - .buf_queue = vpfe_videobuf_queue, - .buf_release = vpfe_videobuf_release, -}; - -/* - * vpfe_reqbufs. currently support REQBUF only once opening - * the device. - */ -static int vpfe_reqbufs(struct file *file, void *priv, - struct v4l2_requestbuffers *req_buf) -{ - struct vpfe_device *vpfe_dev = video_drvdata(file); - struct vpfe_fh *fh = file->private_data; - int ret; - - v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_reqbufs\n"); - - if (V4L2_BUF_TYPE_VIDEO_CAPTURE != req_buf->type) { - v4l2_err(&vpfe_dev->v4l2_dev, "Invalid buffer type\n"); - return -EINVAL; - } - - ret = mutex_lock_interruptible(&vpfe_dev->lock); - if (ret) - return ret; - - if (vpfe_dev->io_usrs != 0) { - v4l2_err(&vpfe_dev->v4l2_dev, "Only one IO user allowed\n"); - ret = -EBUSY; - goto unlock_out; - } - - vpfe_dev->memory = req_buf->memory; - videobuf_queue_dma_contig_init(&vpfe_dev->buffer_queue, - &vpfe_videobuf_qops, - vpfe_dev->pdev, - &vpfe_dev->irqlock, - req_buf->type, - vpfe_dev->fmt.fmt.pix.field, - sizeof(struct videobuf_buffer), - fh, NULL); - - fh->io_allowed = 1; - vpfe_dev->io_usrs = 1; - INIT_LIST_HEAD(&vpfe_dev->dma_queue); - ret = videobuf_reqbufs(&vpfe_dev->buffer_queue, req_buf); -unlock_out: - mutex_unlock(&vpfe_dev->lock); - return ret; -} - -static int vpfe_querybuf(struct file *file, void *priv, - struct v4l2_buffer *buf) -{ - struct vpfe_device *vpfe_dev = video_drvdata(file); - - v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_querybuf\n"); - - if (V4L2_BUF_TYPE_VIDEO_CAPTURE != buf->type) { - v4l2_err(&vpfe_dev->v4l2_dev, "Invalid buf type\n"); - return -EINVAL; - } - - if (vpfe_dev->memory != V4L2_MEMORY_MMAP) { - v4l2_err(&vpfe_dev->v4l2_dev, "Invalid memory\n"); - return -EINVAL; - } - /* Call videobuf_querybuf to get information */ - return videobuf_querybuf(&vpfe_dev->buffer_queue, buf); -} - -static int vpfe_qbuf(struct file *file, void *priv, - struct v4l2_buffer *p) -{ - struct vpfe_device *vpfe_dev = video_drvdata(file); - struct vpfe_fh *fh = file->private_data; - - v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_qbuf\n"); - - if (V4L2_BUF_TYPE_VIDEO_CAPTURE != p->type) { - v4l2_err(&vpfe_dev->v4l2_dev, "Invalid buf type\n"); - return -EINVAL; - } - - /* - * If this file handle is not allowed to do IO, - * return error - */ - if (!fh->io_allowed) { - v4l2_err(&vpfe_dev->v4l2_dev, "fh->io_allowed\n"); - return -EACCES; - } - return videobuf_qbuf(&vpfe_dev->buffer_queue, p); -} - -static int vpfe_dqbuf(struct file *file, void *priv, - struct v4l2_buffer *buf) -{ - struct vpfe_device *vpfe_dev = video_drvdata(file); - - v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_dqbuf\n"); - - if (V4L2_BUF_TYPE_VIDEO_CAPTURE != buf->type) { - v4l2_err(&vpfe_dev->v4l2_dev, "Invalid buf type\n"); - return -EINVAL; - } - return videobuf_dqbuf(&vpfe_dev->buffer_queue, - buf, file->f_flags & O_NONBLOCK); -} - -/* - * vpfe_calculate_offsets : This function calculates buffers offset - * for top and bottom field - */ -static void vpfe_calculate_offsets(struct vpfe_device *vpfe_dev) -{ - struct v4l2_rect image_win; - - v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_calculate_offsets\n"); - - ccdc_dev->hw_ops.get_image_window(&image_win); - vpfe_dev->field_off = image_win.height * image_win.width; -} - -/* vpfe_start_ccdc_capture: start streaming in ccdc/isif */ -static void vpfe_start_ccdc_capture(struct vpfe_device *vpfe_dev) -{ - ccdc_dev->hw_ops.enable(1); - if (ccdc_dev->hw_ops.enable_out_to_sdram) - ccdc_dev->hw_ops.enable_out_to_sdram(1); - vpfe_dev->started = 1; -} - -/* - * vpfe_streamon. Assume the DMA queue is not empty. - * application is expected to call QBUF before calling - * this ioctl. If not, driver returns error - */ -static int vpfe_streamon(struct file *file, void *priv, - enum v4l2_buf_type buf_type) -{ - struct vpfe_device *vpfe_dev = video_drvdata(file); - struct vpfe_fh *fh = file->private_data; - struct vpfe_subdev_info *sdinfo; - unsigned long addr; - int ret; - - v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_streamon\n"); - - if (V4L2_BUF_TYPE_VIDEO_CAPTURE != buf_type) { - v4l2_err(&vpfe_dev->v4l2_dev, "Invalid buf type\n"); - return -EINVAL; - } - - /* If file handle is not allowed IO, return error */ - if (!fh->io_allowed) { - v4l2_err(&vpfe_dev->v4l2_dev, "fh->io_allowed\n"); - return -EACCES; - } - - sdinfo = vpfe_dev->current_subdev; - ret = v4l2_device_call_until_err(&vpfe_dev->v4l2_dev, sdinfo->grp_id, - video, s_stream, 1); - - if (ret && (ret != -ENOIOCTLCMD)) { - v4l2_err(&vpfe_dev->v4l2_dev, "stream on failed in subdev\n"); - return -EINVAL; - } - - /* If buffer queue is empty, return error */ - if (list_empty(&vpfe_dev->buffer_queue.stream)) { - v4l2_err(&vpfe_dev->v4l2_dev, "buffer queue is empty\n"); - return -EIO; - } - - /* Call videobuf_streamon to start streaming * in videobuf */ - ret = videobuf_streamon(&vpfe_dev->buffer_queue); - if (ret) - return ret; - - - ret = mutex_lock_interruptible(&vpfe_dev->lock); - if (ret) - goto streamoff; - /* Get the next frame from the buffer queue */ - vpfe_dev->next_frm = list_entry(vpfe_dev->dma_queue.next, - struct videobuf_buffer, queue); - vpfe_dev->cur_frm = vpfe_dev->next_frm; - /* Remove buffer from the buffer queue */ - list_del(&vpfe_dev->cur_frm->queue); - /* Mark state of the current frame to active */ - vpfe_dev->cur_frm->state = VIDEOBUF_ACTIVE; - /* Initialize field_id and started member */ - vpfe_dev->field_id = 0; - addr = videobuf_to_dma_contig(vpfe_dev->cur_frm); - - /* Calculate field offset */ - vpfe_calculate_offsets(vpfe_dev); - - if (vpfe_attach_irq(vpfe_dev) < 0) { - v4l2_err(&vpfe_dev->v4l2_dev, - "Error in attaching interrupt handle\n"); - ret = -EFAULT; - goto unlock_out; - } - if (ccdc_dev->hw_ops.configure() < 0) { - v4l2_err(&vpfe_dev->v4l2_dev, - "Error in configuring ccdc\n"); - ret = -EINVAL; - goto unlock_out; - } - ccdc_dev->hw_ops.setfbaddr((unsigned long)(addr)); - vpfe_start_ccdc_capture(vpfe_dev); - mutex_unlock(&vpfe_dev->lock); - return ret; -unlock_out: - mutex_unlock(&vpfe_dev->lock); -streamoff: - videobuf_streamoff(&vpfe_dev->buffer_queue); - return ret; -} - -static int vpfe_streamoff(struct file *file, void *priv, - enum v4l2_buf_type buf_type) -{ - struct vpfe_device *vpfe_dev = video_drvdata(file); - struct vpfe_fh *fh = file->private_data; - struct vpfe_subdev_info *sdinfo; - int ret; - - v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_streamoff\n"); - - if (V4L2_BUF_TYPE_VIDEO_CAPTURE != buf_type) { - v4l2_err(&vpfe_dev->v4l2_dev, "Invalid buf type\n"); - return -EINVAL; - } - - /* If io is allowed for this file handle, return error */ - if (!fh->io_allowed) { - v4l2_err(&vpfe_dev->v4l2_dev, "fh->io_allowed\n"); - return -EACCES; - } - - /* If streaming is not started, return error */ - if (!vpfe_dev->started) { - v4l2_err(&vpfe_dev->v4l2_dev, "device started\n"); - return -EINVAL; - } - - ret = mutex_lock_interruptible(&vpfe_dev->lock); - if (ret) - return ret; - - vpfe_stop_ccdc_capture(vpfe_dev); - vpfe_detach_irq(vpfe_dev); - - sdinfo = vpfe_dev->current_subdev; - ret = v4l2_device_call_until_err(&vpfe_dev->v4l2_dev, sdinfo->grp_id, - video, s_stream, 0); - - if (ret && (ret != -ENOIOCTLCMD)) - v4l2_err(&vpfe_dev->v4l2_dev, "stream off failed in subdev\n"); - ret = videobuf_streamoff(&vpfe_dev->buffer_queue); - mutex_unlock(&vpfe_dev->lock); - return ret; -} - -static int vpfe_g_pixelaspect(struct file *file, void *priv, - int type, struct v4l2_fract *f) -{ - struct vpfe_device *vpfe_dev = video_drvdata(file); - - v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_g_pixelaspect\n"); - - if (type != V4L2_BUF_TYPE_VIDEO_CAPTURE) - return -EINVAL; - /* If std_index is invalid, then just return (== 1:1 aspect) */ - if (vpfe_dev->std_index >= ARRAY_SIZE(vpfe_standards)) - return 0; - - *f = vpfe_standards[vpfe_dev->std_index].pixelaspect; - return 0; -} - -static int vpfe_g_selection(struct file *file, void *priv, - struct v4l2_selection *sel) -{ - struct vpfe_device *vpfe_dev = video_drvdata(file); - - v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_g_selection\n"); - - if (sel->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) - return -EINVAL; - - switch (sel->target) { - case V4L2_SEL_TGT_CROP: - sel->r = vpfe_dev->crop; - break; - case V4L2_SEL_TGT_CROP_DEFAULT: - case V4L2_SEL_TGT_CROP_BOUNDS: - sel->r.width = vpfe_standards[vpfe_dev->std_index].width; - sel->r.height = vpfe_standards[vpfe_dev->std_index].height; - break; - default: - return -EINVAL; - } - return 0; -} - -static int vpfe_s_selection(struct file *file, void *priv, - struct v4l2_selection *sel) -{ - struct vpfe_device *vpfe_dev = video_drvdata(file); - struct v4l2_rect rect = sel->r; - int ret; - - v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_s_selection\n"); - - if (sel->type != V4L2_BUF_TYPE_VIDEO_CAPTURE || - sel->target != V4L2_SEL_TGT_CROP) - return -EINVAL; - - if (vpfe_dev->started) { - /* make sure streaming is not started */ - v4l2_err(&vpfe_dev->v4l2_dev, - "Cannot change crop when streaming is ON\n"); - return -EBUSY; - } - - ret = mutex_lock_interruptible(&vpfe_dev->lock); - if (ret) - return ret; - - if (rect.top < 0 || rect.left < 0) { - v4l2_err(&vpfe_dev->v4l2_dev, - "doesn't support negative values for top & left\n"); - ret = -EINVAL; - goto unlock_out; - } - - /* adjust the width to 16 pixel boundary */ - rect.width = ((rect.width + 15) & ~0xf); - - /* make sure parameters are valid */ - if ((rect.left + rect.width > - vpfe_dev->std_info.active_pixels) || - (rect.top + rect.height > - vpfe_dev->std_info.active_lines)) { - v4l2_err(&vpfe_dev->v4l2_dev, "Error in S_SELECTION params\n"); - ret = -EINVAL; - goto unlock_out; - } - ccdc_dev->hw_ops.set_image_window(&rect); - vpfe_dev->fmt.fmt.pix.width = rect.width; - vpfe_dev->fmt.fmt.pix.height = rect.height; - vpfe_dev->fmt.fmt.pix.bytesperline = - ccdc_dev->hw_ops.get_line_length(); - vpfe_dev->fmt.fmt.pix.sizeimage = - vpfe_dev->fmt.fmt.pix.bytesperline * - vpfe_dev->fmt.fmt.pix.height; - vpfe_dev->crop = rect; - sel->r = rect; -unlock_out: - mutex_unlock(&vpfe_dev->lock); - return ret; -} - -/* vpfe capture ioctl operations */ -static const struct v4l2_ioctl_ops vpfe_ioctl_ops = { - .vidioc_querycap = vpfe_querycap, - .vidioc_g_fmt_vid_cap = vpfe_g_fmt_vid_cap, - .vidioc_enum_fmt_vid_cap = vpfe_enum_fmt_vid_cap, - .vidioc_s_fmt_vid_cap = vpfe_s_fmt_vid_cap, - .vidioc_try_fmt_vid_cap = vpfe_try_fmt_vid_cap, - .vidioc_enum_input = vpfe_enum_input, - .vidioc_g_input = vpfe_g_input, - .vidioc_s_input = vpfe_s_input, - .vidioc_querystd = vpfe_querystd, - .vidioc_s_std = vpfe_s_std, - .vidioc_g_std = vpfe_g_std, - .vidioc_reqbufs = vpfe_reqbufs, - .vidioc_querybuf = vpfe_querybuf, - .vidioc_qbuf = vpfe_qbuf, - .vidioc_dqbuf = vpfe_dqbuf, - .vidioc_streamon = vpfe_streamon, - .vidioc_streamoff = vpfe_streamoff, - .vidioc_g_pixelaspect = vpfe_g_pixelaspect, - .vidioc_g_selection = vpfe_g_selection, - .vidioc_s_selection = vpfe_s_selection, -}; - -static struct vpfe_device *vpfe_initialize(void) -{ - struct vpfe_device *vpfe_dev; - - /* Default number of buffers should be 3 */ - if ((numbuffers > 0) && - (numbuffers < config_params.min_numbuffers)) - numbuffers = config_params.min_numbuffers; - - /* - * Set buffer size to min buffers size if invalid buffer size is - * given - */ - if (bufsize < config_params.min_bufsize) - bufsize = config_params.min_bufsize; - - config_params.numbuffers = numbuffers; - - if (numbuffers) - config_params.device_bufsize = bufsize; - - /* Allocate memory for device objects */ - vpfe_dev = kzalloc(sizeof(*vpfe_dev), GFP_KERNEL); - - return vpfe_dev; -} - -/* - * vpfe_probe : This function creates device entries by register - * itself to the V4L2 driver and initializes fields of each - * device objects - */ -static int vpfe_probe(struct platform_device *pdev) -{ - struct vpfe_subdev_info *sdinfo; - struct vpfe_config *vpfe_cfg; - struct resource *res1; - struct vpfe_device *vpfe_dev; - struct i2c_adapter *i2c_adap; - struct video_device *vfd; - int ret, i, j; - int num_subdevs = 0; - - /* Get the pointer to the device object */ - vpfe_dev = vpfe_initialize(); - - if (!vpfe_dev) { - v4l2_err(pdev->dev.driver, - "Failed to allocate memory for vpfe_dev\n"); - return -ENOMEM; - } - - vpfe_dev->pdev = &pdev->dev; - - if (!pdev->dev.platform_data) { - v4l2_err(pdev->dev.driver, "Unable to get vpfe config\n"); - ret = -ENODEV; - goto probe_free_dev_mem; - } - - vpfe_cfg = pdev->dev.platform_data; - vpfe_dev->cfg = vpfe_cfg; - if (!vpfe_cfg->ccdc || !vpfe_cfg->card_name || !vpfe_cfg->sub_devs) { - v4l2_err(pdev->dev.driver, "null ptr in vpfe_cfg\n"); - ret = -ENOENT; - goto probe_free_dev_mem; - } - - /* Allocate memory for ccdc configuration */ - ccdc_cfg = kmalloc(sizeof(*ccdc_cfg), GFP_KERNEL); - if (!ccdc_cfg) { - ret = -ENOMEM; - goto probe_free_dev_mem; - } - - mutex_lock(&ccdc_lock); - - strscpy(ccdc_cfg->name, vpfe_cfg->ccdc, sizeof(ccdc_cfg->name)); - /* Get VINT0 irq resource */ - res1 = platform_get_resource(pdev, IORESOURCE_IRQ, 0); - if (!res1) { - v4l2_err(pdev->dev.driver, - "Unable to get interrupt for VINT0\n"); - ret = -ENODEV; - goto probe_free_ccdc_cfg_mem; - } - vpfe_dev->ccdc_irq0 = res1->start; - - /* Get VINT1 irq resource */ - res1 = platform_get_resource(pdev, IORESOURCE_IRQ, 1); - if (!res1) { - v4l2_err(pdev->dev.driver, - "Unable to get interrupt for VINT1\n"); - ret = -ENODEV; - goto probe_free_ccdc_cfg_mem; - } - vpfe_dev->ccdc_irq1 = res1->start; - - ret = request_irq(vpfe_dev->ccdc_irq0, vpfe_isr, 0, - "vpfe_capture0", vpfe_dev); - - if (0 != ret) { - v4l2_err(pdev->dev.driver, "Unable to request interrupt\n"); - goto probe_free_ccdc_cfg_mem; - } - - vfd = &vpfe_dev->video_dev; - /* Initialize field of video device */ - vfd->release = video_device_release_empty; - vfd->fops = &vpfe_fops; - vfd->ioctl_ops = &vpfe_ioctl_ops; - vfd->tvnorms = 0; - vfd->v4l2_dev = &vpfe_dev->v4l2_dev; - vfd->device_caps = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING; - snprintf(vfd->name, sizeof(vfd->name), - "%s_V%d.%d.%d", - CAPTURE_DRV_NAME, - (VPFE_CAPTURE_VERSION_CODE >> 16) & 0xff, - (VPFE_CAPTURE_VERSION_CODE >> 8) & 0xff, - (VPFE_CAPTURE_VERSION_CODE) & 0xff); - - ret = v4l2_device_register(&pdev->dev, &vpfe_dev->v4l2_dev); - if (ret) { - v4l2_err(pdev->dev.driver, - "Unable to register v4l2 device.\n"); - goto probe_out_release_irq; - } - v4l2_info(&vpfe_dev->v4l2_dev, "v4l2 device registered\n"); - spin_lock_init(&vpfe_dev->irqlock); - spin_lock_init(&vpfe_dev->dma_queue_lock); - mutex_init(&vpfe_dev->lock); - - /* Initialize field of the device objects */ - vpfe_dev->numbuffers = config_params.numbuffers; - - /* register video device */ - v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, - "trying to register vpfe device.\n"); - v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, - "video_dev=%p\n", &vpfe_dev->video_dev); - vpfe_dev->fmt.type = V4L2_BUF_TYPE_VIDEO_CAPTURE; - ret = video_register_device(&vpfe_dev->video_dev, - VFL_TYPE_VIDEO, -1); - - if (ret) { - v4l2_err(pdev->dev.driver, - "Unable to register video device.\n"); - goto probe_out_v4l2_unregister; - } - - v4l2_info(&vpfe_dev->v4l2_dev, "video device registered\n"); - /* set the driver data in platform device */ - platform_set_drvdata(pdev, vpfe_dev); - /* set driver private data */ - video_set_drvdata(&vpfe_dev->video_dev, vpfe_dev); - i2c_adap = i2c_get_adapter(vpfe_cfg->i2c_adapter_id); - num_subdevs = vpfe_cfg->num_subdevs; - vpfe_dev->sd = kmalloc_array(num_subdevs, - sizeof(*vpfe_dev->sd), - GFP_KERNEL); - if (!vpfe_dev->sd) { - ret = -ENOMEM; - goto probe_out_video_unregister; - } - - for (i = 0; i < num_subdevs; i++) { - struct v4l2_input *inps; - - sdinfo = &vpfe_cfg->sub_devs[i]; - - /* Load up the subdevice */ - vpfe_dev->sd[i] = - v4l2_i2c_new_subdev_board(&vpfe_dev->v4l2_dev, - i2c_adap, - &sdinfo->board_info, - NULL); - if (vpfe_dev->sd[i]) { - v4l2_info(&vpfe_dev->v4l2_dev, - "v4l2 sub device %s registered\n", - sdinfo->name); - vpfe_dev->sd[i]->grp_id = sdinfo->grp_id; - /* update tvnorms from the sub devices */ - for (j = 0; j < sdinfo->num_inputs; j++) { - inps = &sdinfo->inputs[j]; - vfd->tvnorms |= inps->std; - } - } else { - v4l2_info(&vpfe_dev->v4l2_dev, - "v4l2 sub device %s register fails\n", - sdinfo->name); - ret = -ENXIO; - goto probe_sd_out; - } - } - - /* set first sub device as current one */ - vpfe_dev->current_subdev = &vpfe_cfg->sub_devs[0]; - vpfe_dev->v4l2_dev.ctrl_handler = vpfe_dev->sd[0]->ctrl_handler; - - /* We have at least one sub device to work with */ - mutex_unlock(&ccdc_lock); - return 0; - -probe_sd_out: - kfree(vpfe_dev->sd); -probe_out_video_unregister: - video_unregister_device(&vpfe_dev->video_dev); -probe_out_v4l2_unregister: - v4l2_device_unregister(&vpfe_dev->v4l2_dev); -probe_out_release_irq: - free_irq(vpfe_dev->ccdc_irq0, vpfe_dev); -probe_free_ccdc_cfg_mem: - kfree(ccdc_cfg); - mutex_unlock(&ccdc_lock); -probe_free_dev_mem: - kfree(vpfe_dev); - return ret; -} - -/* - * vpfe_remove : It un-register device from V4L2 driver - */ -static int vpfe_remove(struct platform_device *pdev) -{ - struct vpfe_device *vpfe_dev = platform_get_drvdata(pdev); - - v4l2_info(pdev->dev.driver, "vpfe_remove\n"); - - free_irq(vpfe_dev->ccdc_irq0, vpfe_dev); - kfree(vpfe_dev->sd); - v4l2_device_unregister(&vpfe_dev->v4l2_dev); - video_unregister_device(&vpfe_dev->video_dev); - kfree(vpfe_dev); - kfree(ccdc_cfg); - return 0; -} - -static int vpfe_suspend(struct device *dev) -{ - return 0; -} - -static int vpfe_resume(struct device *dev) -{ - return 0; -} - -static const struct dev_pm_ops vpfe_dev_pm_ops = { - .suspend = vpfe_suspend, - .resume = vpfe_resume, -}; - -static struct platform_driver vpfe_driver = { - .driver = { - .name = CAPTURE_DRV_NAME, - .pm = &vpfe_dev_pm_ops, - }, - .probe = vpfe_probe, - .remove = vpfe_remove, -}; - -module_platform_driver(vpfe_driver); diff --git a/include/media/davinci/ccdc_types.h b/include/media/davinci/ccdc_types.h deleted file mode 100644 index 971984dc1ce4..000000000000 --- a/include/media/davinci/ccdc_types.h +++ /dev/null @@ -1,30 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-or-later */ -/* - * Copyright (C) 2008-2009 Texas Instruments Inc - * - **************************************************************************/ -#ifndef _CCDC_TYPES_H -#define _CCDC_TYPES_H -enum ccdc_pixfmt { - CCDC_PIXFMT_RAW, - CCDC_PIXFMT_YCBCR_16BIT, - CCDC_PIXFMT_YCBCR_8BIT -}; - -enum ccdc_frmfmt { - CCDC_FRMFMT_PROGRESSIVE, - CCDC_FRMFMT_INTERLACED -}; - -/* PIXEL ORDER IN MEMORY from LSB to MSB */ -/* only applicable for 8-bit input mode */ -enum ccdc_pixorder { - CCDC_PIXORDER_YCBYCR, - CCDC_PIXORDER_CBYCRY, -}; - -enum ccdc_buftype { - CCDC_BUFTYPE_FLD_INTERLEAVED, - CCDC_BUFTYPE_FLD_SEPARATED -}; -#endif From patchwork Wed Jan 11 10:52:52 2023 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Hans Verkuil X-Patchwork-Id: 13096409 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id A43DDC54EBE for ; Wed, 11 Jan 2023 10:54:18 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S238193AbjAKKxr (ORCPT ); Wed, 11 Jan 2023 05:53:47 -0500 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:37226 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S236083AbjAKKxQ (ORCPT ); Wed, 11 Jan 2023 05:53:16 -0500 Received: from ams.source.kernel.org (ams.source.kernel.org [IPv6:2604:1380:4601:e00::1]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id D91F5101D for ; Wed, 11 Jan 2023 02:53:11 -0800 (PST) Received: from smtp.kernel.org (relay.kernel.org [52.25.139.140]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by ams.source.kernel.org (Postfix) with ESMTPS id 1AE92B81BB4 for ; Wed, 11 Jan 2023 10:53:10 +0000 (UTC) Received: by smtp.kernel.org (Postfix) with ESMTPSA id D60B0C433F1; Wed, 11 Jan 2023 10:53:08 +0000 (UTC) From: Hans Verkuil To: linux-media@vger.kernel.org Cc: Lad Prabhakar , Hans Verkuil Subject: [PATCH 07/13] tm6000: remove deprecated driver Date: Wed, 11 Jan 2023 11:52:52 +0100 Message-Id: <20230111105258.547471-8-hverkuil-cisco@xs4all.nl> X-Mailer: git-send-email 2.39.0 In-Reply-To: <20230111105258.547471-1-hverkuil-cisco@xs4all.nl> References: <20230111105258.547471-1-hverkuil-cisco@xs4all.nl> MIME-Version: 1.0 Precedence: bulk List-ID: X-Mailing-List: linux-media@vger.kernel.org The tm6000 driver does not use the vb2 framework for streaming video, instead it uses the old vb1 framework and nobody stepped in to convert this driver to vb2. The hardware is very old, so the decision was made to remove it altogether since we want to get rid of the old vb1 framework. Signed-off-by: Hans Verkuil --- .../admin-guide/media/tm6000-cardlist.rst | 83 - .../admin-guide/media/usb-cardlist.rst | 4 - MAINTAINERS | 9 - drivers/staging/media/Kconfig | 1 - drivers/staging/media/Makefile | 1 - .../staging/media/deprecated/tm6000/Kconfig | 37 - .../staging/media/deprecated/tm6000/Makefile | 14 - drivers/staging/media/deprecated/tm6000/TODO | 7 - .../media/deprecated/tm6000/tm6000-alsa.c | 440 ----- .../media/deprecated/tm6000/tm6000-cards.c | 1397 -------------- .../media/deprecated/tm6000/tm6000-core.c | 916 --------- .../media/deprecated/tm6000/tm6000-dvb.c | 454 ----- .../media/deprecated/tm6000/tm6000-i2c.c | 317 --- .../media/deprecated/tm6000/tm6000-input.c | 503 ----- .../media/deprecated/tm6000/tm6000-regs.h | 588 ------ .../media/deprecated/tm6000/tm6000-stds.c | 623 ------ .../media/deprecated/tm6000/tm6000-usb-isoc.h | 38 - .../media/deprecated/tm6000/tm6000-video.c | 1703 ----------------- .../staging/media/deprecated/tm6000/tm6000.h | 396 ---- 19 files changed, 7531 deletions(-) delete mode 100644 Documentation/admin-guide/media/tm6000-cardlist.rst delete mode 100644 drivers/staging/media/deprecated/tm6000/Kconfig delete mode 100644 drivers/staging/media/deprecated/tm6000/Makefile delete mode 100644 drivers/staging/media/deprecated/tm6000/TODO delete mode 100644 drivers/staging/media/deprecated/tm6000/tm6000-alsa.c delete mode 100644 drivers/staging/media/deprecated/tm6000/tm6000-cards.c delete mode 100644 drivers/staging/media/deprecated/tm6000/tm6000-core.c delete mode 100644 drivers/staging/media/deprecated/tm6000/tm6000-dvb.c delete mode 100644 drivers/staging/media/deprecated/tm6000/tm6000-i2c.c delete mode 100644 drivers/staging/media/deprecated/tm6000/tm6000-input.c delete mode 100644 drivers/staging/media/deprecated/tm6000/tm6000-regs.h delete mode 100644 drivers/staging/media/deprecated/tm6000/tm6000-stds.c delete mode 100644 drivers/staging/media/deprecated/tm6000/tm6000-usb-isoc.h delete mode 100644 drivers/staging/media/deprecated/tm6000/tm6000-video.c delete mode 100644 drivers/staging/media/deprecated/tm6000/tm6000.h diff --git a/Documentation/admin-guide/media/tm6000-cardlist.rst b/Documentation/admin-guide/media/tm6000-cardlist.rst deleted file mode 100644 index 6d2769c0f4d8..000000000000 --- a/Documentation/admin-guide/media/tm6000-cardlist.rst +++ /dev/null @@ -1,83 +0,0 @@ -.. SPDX-License-Identifier: GPL-2.0 - -TM6000 cards list -================= - -.. tabularcolumns:: |p{1.4cm}|p{11.1cm}|p{4.2cm}| - -.. flat-table:: - :header-rows: 1 - :widths: 2 19 18 - :stub-columns: 0 - - * - Card number - - Card name - - USB IDs - - * - 0 - - Unknown tm6000 video grabber - - - - * - 1 - - Generic tm5600 board - - 6000:0001 - - * - 2 - - Generic tm6000 board - - - - * - 3 - - Generic tm6010 board - - 6000:0002 - - * - 4 - - 10Moons UT 821 - - - - * - 5 - - 10Moons UT 330 - - - - * - 6 - - ADSTECH Dual TV USB - - 06e1:f332 - - * - 7 - - Freecom Hybrid Stick / Moka DVB-T Receiver Dual - - 14aa:0620 - - * - 8 - - ADSTECH Mini Dual TV USB - - 06e1:b339 - - * - 9 - - Hauppauge WinTV HVR-900H / WinTV USB2-Stick - - 2040:6600, 2040:6601, 2040:6610, 2040:6611 - - * - 10 - - Beholder Wander DVB-T/TV/FM USB2.0 - - 6000:dec0 - - * - 11 - - Beholder Voyager TV/FM USB2.0 - - 6000:dec1 - - * - 12 - - Terratec Cinergy Hybrid XE / Cinergy Hybrid-Stick - - 0ccd:0086, 0ccd:00A5 - - * - 13 - - Twinhan TU501(704D1) - - 13d3:3240, 13d3:3241, 13d3:3243, 13d3:3264 - - * - 14 - - Beholder Wander Lite DVB-T/TV/FM USB2.0 - - 6000:dec2 - - * - 15 - - Beholder Voyager Lite TV/FM USB2.0 - - 6000:dec3 - - * - 16 - - Terratec Grabster AV 150/250 MX - - 0ccd:0079 diff --git a/Documentation/admin-guide/media/usb-cardlist.rst b/Documentation/admin-guide/media/usb-cardlist.rst index 071ec3958b3a..5f5ab0723e48 100644 --- a/Documentation/admin-guide/media/usb-cardlist.rst +++ b/Documentation/admin-guide/media/usb-cardlist.rst @@ -92,9 +92,6 @@ pwc USB Philips Cameras s2250 Sensoray 2250/2251 s2255drv USB Sensoray 2255 video capture device smsusb Siano SMS1xxx based MDTV receiver -tm6000-alsa TV Master TM5600/6000/6010 audio -tm6000-dvb DVB Support for tm6000 based TV cards -tm6000 TV Master TM5600/6000/6010 driver ttusb_dec Technotrend/Hauppauge USB DEC devices usbtv USBTV007 video capture uvcvideo USB Video Class (UVC) @@ -107,7 +104,6 @@ zd1301 ZyDAS ZD1301 au0828-cardlist cx231xx-cardlist em28xx-cardlist - tm6000-cardlist siano-cardlist gspca-cardlist diff --git a/MAINTAINERS b/MAINTAINERS index 1a95b9bc6824..ba5254cd1002 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -20976,15 +20976,6 @@ W: http://sourceforge.net/projects/tlan/ F: Documentation/networking/device_drivers/ethernet/ti/tlan.rst F: drivers/net/ethernet/ti/tlan.* -TM6000 VIDEO4LINUX DRIVER -M: Mauro Carvalho Chehab -L: linux-media@vger.kernel.org -S: Odd fixes -W: https://linuxtv.org -T: git git://linuxtv.org/media_tree.git -F: Documentation/admin-guide/media/tm6000* -F: drivers/staging/media/deprecated/tm6000/ - TMIO/SDHI MMC DRIVER M: Wolfram Sang L: linux-mmc@vger.kernel.org diff --git a/drivers/staging/media/Kconfig b/drivers/staging/media/Kconfig index 7224f43afd7e..d71ee9a5d04b 100644 --- a/drivers/staging/media/Kconfig +++ b/drivers/staging/media/Kconfig @@ -53,7 +53,6 @@ menuconfig STAGING_MEDIA_DEPRECATED if STAGING_MEDIA_DEPRECATED source "drivers/staging/media/deprecated/atmel/Kconfig" source "drivers/staging/media/deprecated/saa7146/Kconfig" -source "drivers/staging/media/deprecated/tm6000/Kconfig" endif endif diff --git a/drivers/staging/media/Makefile b/drivers/staging/media/Makefile index 37a4c6d81ded..1a01c1af3224 100644 --- a/drivers/staging/media/Makefile +++ b/drivers/staging/media/Makefile @@ -9,5 +9,4 @@ obj-$(CONFIG_VIDEO_ROCKCHIP_VDEC) += rkvdec/ obj-$(CONFIG_VIDEO_SUNXI) += sunxi/ obj-$(CONFIG_VIDEO_TEGRA) += tegra-video/ obj-$(CONFIG_VIDEO_IPU3_IMGU) += ipu3/ -obj-$(CONFIG_VIDEO_TM6000) += deprecated/tm6000/ obj-y += deprecated/saa7146/ diff --git a/drivers/staging/media/deprecated/tm6000/Kconfig b/drivers/staging/media/deprecated/tm6000/Kconfig deleted file mode 100644 index 73d72e49eb28..000000000000 --- a/drivers/staging/media/deprecated/tm6000/Kconfig +++ /dev/null @@ -1,37 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0-only -config VIDEO_TM6000 - tristate "TV Master TM5600/6000/6010 driver (DEPRECATED)" - depends on VIDEO_DEV && I2C && INPUT && RC_CORE && USB - select VIDEO_TUNER - select MEDIA_TUNER_XC2028 - select MEDIA_TUNER_XC5000 - select VIDEOBUF_VMALLOC - help - Support for TM5600/TM6000/TM6010 USB Device - - Since these cards have no MPEG decoder onboard, they transmit - only compressed MPEG data over the usb bus, so you need - an external software decoder to watch TV on your computer. - - This driver is deprecated and is scheduled for removal by - the beginning of 2023. See the TODO file for more information. - - Say Y if you own such a device and want to use it. - -config VIDEO_TM6000_ALSA - tristate "TV Master TM5600/6000/6010 audio support" - depends on VIDEO_TM6000 && SND - select SND_PCM - help - This is a video4linux driver for direct (DMA) audio for - TM5600/TM6000/TM6010 USB Devices. - - To compile this driver as a module, choose M here: the - module will be called tm6000-alsa. - -config VIDEO_TM6000_DVB - tristate "DVB Support for tm6000 based TV cards" - depends on VIDEO_TM6000 && DVB_CORE && USB - select DVB_ZL10353 - help - This adds support for DVB cards based on the tm5600/tm6000 chip. diff --git a/drivers/staging/media/deprecated/tm6000/Makefile b/drivers/staging/media/deprecated/tm6000/Makefile deleted file mode 100644 index 75247a02a485..000000000000 --- a/drivers/staging/media/deprecated/tm6000/Makefile +++ /dev/null @@ -1,14 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0 -tm6000-y := tm6000-cards.o \ - tm6000-core.o \ - tm6000-i2c.o \ - tm6000-video.o \ - tm6000-stds.o \ - tm6000-input.o - -obj-$(CONFIG_VIDEO_TM6000) += tm6000.o -obj-$(CONFIG_VIDEO_TM6000_ALSA) += tm6000-alsa.o -obj-$(CONFIG_VIDEO_TM6000_DVB) += tm6000-dvb.o - -ccflags-y += -I $(srctree)/drivers/media/tuners -ccflags-y += -I $(srctree)/drivers/media/dvb-frontends diff --git a/drivers/staging/media/deprecated/tm6000/TODO b/drivers/staging/media/deprecated/tm6000/TODO deleted file mode 100644 index ecb30a429689..000000000000 --- a/drivers/staging/media/deprecated/tm6000/TODO +++ /dev/null @@ -1,7 +0,0 @@ -This is one of the few drivers still not using the vb2 -framework, so this driver is now deprecated with the intent of -removing it altogether by the beginning of 2023. - -In order to keep this driver it has to be converted to vb2. -If someone is interested in doing this work, then contact the -linux-media mailinglist (https://linuxtv.org/lists.php). diff --git a/drivers/staging/media/deprecated/tm6000/tm6000-alsa.c b/drivers/staging/media/deprecated/tm6000/tm6000-alsa.c deleted file mode 100644 index a19a46770c2b..000000000000 --- a/drivers/staging/media/deprecated/tm6000/tm6000-alsa.c +++ /dev/null @@ -1,440 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -// Support for audio capture for tm5600/6000/6010 -// Copyright (c) 2007-2008 Mauro Carvalho Chehab -// -// Based on cx88-alsa.c - -#include -#include -#include -#include -#include -#include - -#include -#include -#include -#include -#include -#include - - -#include "tm6000.h" -#include "tm6000-regs.h" - -#undef dprintk - -#define dprintk(level, fmt, arg...) do { \ - if (debug >= level) \ - printk(KERN_INFO "%s/1: " fmt, chip->core->name , ## arg); \ - } while (0) - -/**************************************************************************** - Module global static vars - ****************************************************************************/ - -static int index[SNDRV_CARDS] = SNDRV_DEFAULT_IDX; /* Index 0-MAX */ - -static bool enable[SNDRV_CARDS] = SNDRV_DEFAULT_ENABLE_PNP; - -module_param_array(enable, bool, NULL, 0444); -MODULE_PARM_DESC(enable, "Enable tm6000x soundcard. default enabled."); - -module_param_array(index, int, NULL, 0444); -MODULE_PARM_DESC(index, "Index value for tm6000x capture interface(s)."); - - -/**************************************************************************** - Module macros - ****************************************************************************/ - -MODULE_DESCRIPTION("ALSA driver module for tm5600/tm6000/tm6010 based TV cards"); -MODULE_AUTHOR("Mauro Carvalho Chehab"); -MODULE_LICENSE("GPL v2"); -static unsigned int debug; -module_param(debug, int, 0644); -MODULE_PARM_DESC(debug, "enable debug messages"); - -/**************************************************************************** - Module specific functions - ****************************************************************************/ - -/* - * BOARD Specific: Sets audio DMA - */ - -static int _tm6000_start_audio_dma(struct snd_tm6000_card *chip) -{ - struct tm6000_core *core = chip->core; - - dprintk(1, "Starting audio DMA\n"); - - /* Enables audio */ - tm6000_set_reg_mask(core, TM6010_REQ07_RCC_ACTIVE_IF, 0x40, 0x40); - - tm6000_set_audio_bitrate(core, 48000); - - return 0; -} - -/* - * BOARD Specific: Resets audio DMA - */ -static int _tm6000_stop_audio_dma(struct snd_tm6000_card *chip) -{ - struct tm6000_core *core = chip->core; - - dprintk(1, "Stopping audio DMA\n"); - - /* Disables audio */ - tm6000_set_reg_mask(core, TM6010_REQ07_RCC_ACTIVE_IF, 0x00, 0x40); - - return 0; -} - -/**************************************************************************** - ALSA PCM Interface - ****************************************************************************/ - -/* - * Digital hardware definition - */ -#define DEFAULT_FIFO_SIZE 4096 - -static const struct snd_pcm_hardware snd_tm6000_digital_hw = { - .info = SNDRV_PCM_INFO_BATCH | - SNDRV_PCM_INFO_MMAP | - SNDRV_PCM_INFO_INTERLEAVED | - SNDRV_PCM_INFO_BLOCK_TRANSFER | - SNDRV_PCM_INFO_MMAP_VALID, - .formats = SNDRV_PCM_FMTBIT_S16_LE, - - .rates = SNDRV_PCM_RATE_CONTINUOUS | SNDRV_PCM_RATE_KNOT, - .rate_min = 48000, - .rate_max = 48000, - .channels_min = 2, - .channels_max = 2, - .period_bytes_min = 64, - .period_bytes_max = 12544, - .periods_min = 2, - .periods_max = 98, - .buffer_bytes_max = 62720 * 8, -}; - -/* - * audio pcm capture open callback - */ -static int snd_tm6000_pcm_open(struct snd_pcm_substream *substream) -{ - struct snd_tm6000_card *chip = snd_pcm_substream_chip(substream); - struct snd_pcm_runtime *runtime = substream->runtime; - int err; - - err = snd_pcm_hw_constraint_pow2(runtime, 0, - SNDRV_PCM_HW_PARAM_PERIODS); - if (err < 0) - goto _error; - - chip->substream = substream; - - runtime->hw = snd_tm6000_digital_hw; - snd_pcm_hw_constraint_integer(runtime, SNDRV_PCM_HW_PARAM_PERIODS); - - return 0; -_error: - dprintk(1, "Error opening PCM!\n"); - return err; -} - -/* - * audio close callback - */ -static int snd_tm6000_close(struct snd_pcm_substream *substream) -{ - struct snd_tm6000_card *chip = snd_pcm_substream_chip(substream); - struct tm6000_core *core = chip->core; - - if (atomic_read(&core->stream_started) > 0) { - atomic_set(&core->stream_started, 0); - schedule_work(&core->wq_trigger); - } - - return 0; -} - -static int tm6000_fillbuf(struct tm6000_core *core, char *buf, int size) -{ - struct snd_tm6000_card *chip = core->adev; - struct snd_pcm_substream *substream = chip->substream; - struct snd_pcm_runtime *runtime; - int period_elapsed = 0; - unsigned int stride, buf_pos; - int length; - - if (atomic_read(&core->stream_started) == 0) - return 0; - - if (!size || !substream) { - dprintk(1, "substream was NULL\n"); - return -EINVAL; - } - - runtime = substream->runtime; - if (!runtime || !runtime->dma_area) { - dprintk(1, "runtime was NULL\n"); - return -EINVAL; - } - - buf_pos = chip->buf_pos; - stride = runtime->frame_bits >> 3; - - if (stride == 0) { - dprintk(1, "stride is zero\n"); - return -EINVAL; - } - - length = size / stride; - if (length == 0) { - dprintk(1, "%s: length was zero\n", __func__); - return -EINVAL; - } - - dprintk(1, "Copying %d bytes at %p[%d] - buf size=%d x %d\n", size, - runtime->dma_area, buf_pos, - (unsigned int)runtime->buffer_size, stride); - - if (buf_pos + length >= runtime->buffer_size) { - unsigned int cnt = runtime->buffer_size - buf_pos; - memcpy(runtime->dma_area + buf_pos * stride, buf, cnt * stride); - memcpy(runtime->dma_area, buf + cnt * stride, - length * stride - cnt * stride); - } else - memcpy(runtime->dma_area + buf_pos * stride, buf, - length * stride); - - snd_pcm_stream_lock(substream); - - chip->buf_pos += length; - if (chip->buf_pos >= runtime->buffer_size) - chip->buf_pos -= runtime->buffer_size; - - chip->period_pos += length; - if (chip->period_pos >= runtime->period_size) { - chip->period_pos -= runtime->period_size; - period_elapsed = 1; - } - - snd_pcm_stream_unlock(substream); - - if (period_elapsed) - snd_pcm_period_elapsed(substream); - - return 0; -} - -/* - * prepare callback - */ -static int snd_tm6000_prepare(struct snd_pcm_substream *substream) -{ - struct snd_tm6000_card *chip = snd_pcm_substream_chip(substream); - - chip->buf_pos = 0; - chip->period_pos = 0; - - return 0; -} - - -/* - * trigger callback - */ -static void audio_trigger(struct work_struct *work) -{ - struct tm6000_core *core = container_of(work, struct tm6000_core, - wq_trigger); - struct snd_tm6000_card *chip = core->adev; - - if (atomic_read(&core->stream_started)) { - dprintk(1, "starting capture"); - _tm6000_start_audio_dma(chip); - } else { - dprintk(1, "stopping capture"); - _tm6000_stop_audio_dma(chip); - } -} - -static int snd_tm6000_card_trigger(struct snd_pcm_substream *substream, int cmd) -{ - struct snd_tm6000_card *chip = snd_pcm_substream_chip(substream); - struct tm6000_core *core = chip->core; - int err = 0; - - switch (cmd) { - case SNDRV_PCM_TRIGGER_PAUSE_RELEASE: - case SNDRV_PCM_TRIGGER_RESUME: - case SNDRV_PCM_TRIGGER_START: - atomic_set(&core->stream_started, 1); - break; - case SNDRV_PCM_TRIGGER_PAUSE_PUSH: - case SNDRV_PCM_TRIGGER_SUSPEND: - case SNDRV_PCM_TRIGGER_STOP: - atomic_set(&core->stream_started, 0); - break; - default: - err = -EINVAL; - break; - } - schedule_work(&core->wq_trigger); - - return err; -} -/* - * pointer callback - */ -static snd_pcm_uframes_t snd_tm6000_pointer(struct snd_pcm_substream *substream) -{ - struct snd_tm6000_card *chip = snd_pcm_substream_chip(substream); - - return chip->buf_pos; -} - -/* - * operators - */ -static const struct snd_pcm_ops snd_tm6000_pcm_ops = { - .open = snd_tm6000_pcm_open, - .close = snd_tm6000_close, - .prepare = snd_tm6000_prepare, - .trigger = snd_tm6000_card_trigger, - .pointer = snd_tm6000_pointer, -}; - -/* - * create a PCM device - */ - -/* FIXME: Control interface - How to control volume/mute? */ - -/**************************************************************************** - Basic Flow for Sound Devices - ****************************************************************************/ - -/* - * Alsa Constructor - Component probe - */ -static int tm6000_audio_init(struct tm6000_core *dev) -{ - struct snd_card *card; - struct snd_tm6000_card *chip; - int rc; - static int devnr; - char component[14]; - struct snd_pcm *pcm; - - if (!dev) - return 0; - - if (devnr >= SNDRV_CARDS) - return -ENODEV; - - if (!enable[devnr]) - return -ENOENT; - - rc = snd_card_new(&dev->udev->dev, index[devnr], "tm6000", - THIS_MODULE, 0, &card); - if (rc < 0) { - snd_printk(KERN_ERR "cannot create card instance %d\n", devnr); - return rc; - } - strscpy(card->driver, "tm6000-alsa", sizeof(card->driver)); - strscpy(card->shortname, "TM5600/60x0", sizeof(card->shortname)); - sprintf(card->longname, "TM5600/60x0 Audio at bus %d device %d", - dev->udev->bus->busnum, dev->udev->devnum); - - sprintf(component, "USB%04x:%04x", - le16_to_cpu(dev->udev->descriptor.idVendor), - le16_to_cpu(dev->udev->descriptor.idProduct)); - snd_component_add(card, component); - - chip = kzalloc(sizeof(struct snd_tm6000_card), GFP_KERNEL); - if (!chip) { - rc = -ENOMEM; - goto error; - } - - chip->core = dev; - chip->card = card; - dev->adev = chip; - spin_lock_init(&chip->reg_lock); - - rc = snd_pcm_new(card, "TM6000 Audio", 0, 0, 1, &pcm); - if (rc < 0) - goto error_chip; - - pcm->info_flags = 0; - pcm->private_data = chip; - strscpy(pcm->name, "Trident TM5600/60x0", sizeof(pcm->name)); - - snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_CAPTURE, &snd_tm6000_pcm_ops); - snd_pcm_set_managed_buffer_all(pcm, SNDRV_DMA_TYPE_VMALLOC, NULL, 0, 0); - - INIT_WORK(&dev->wq_trigger, audio_trigger); - rc = snd_card_register(card); - if (rc < 0) - goto error_chip; - - dprintk(1, "Registered audio driver for %s\n", card->longname); - - return 0; - -error_chip: - kfree(chip); - dev->adev = NULL; -error: - snd_card_free(card); - return rc; -} - -static int tm6000_audio_fini(struct tm6000_core *dev) -{ - struct snd_tm6000_card *chip; - - if (!dev) - return 0; - chip = dev->adev; - - if (!chip) - return 0; - - if (!chip->card) - return 0; - - snd_card_free(chip->card); - chip->card = NULL; - kfree(chip); - dev->adev = NULL; - - return 0; -} - -static struct tm6000_ops audio_ops = { - .type = TM6000_AUDIO, - .name = "TM6000 Audio Extension", - .init = tm6000_audio_init, - .fini = tm6000_audio_fini, - .fillbuf = tm6000_fillbuf, -}; - -static int __init tm6000_alsa_register(void) -{ - return tm6000_register_extension(&audio_ops); -} - -static void __exit tm6000_alsa_unregister(void) -{ - tm6000_unregister_extension(&audio_ops); -} - -module_init(tm6000_alsa_register); -module_exit(tm6000_alsa_unregister); diff --git a/drivers/staging/media/deprecated/tm6000/tm6000-cards.c b/drivers/staging/media/deprecated/tm6000/tm6000-cards.c deleted file mode 100644 index 98f4a63adc2a..000000000000 --- a/drivers/staging/media/deprecated/tm6000/tm6000-cards.c +++ /dev/null @@ -1,1397 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -// tm6000-cards.c - driver for TM5600/TM6000/TM6010 USB video capture devices -// -// Copyright (c) 2006-2007 Mauro Carvalho Chehab - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include "tm6000.h" -#include "tm6000-regs.h" -#include "xc2028.h" -#include "xc5000.h" - -#define TM6000_BOARD_UNKNOWN 0 -#define TM5600_BOARD_GENERIC 1 -#define TM6000_BOARD_GENERIC 2 -#define TM6010_BOARD_GENERIC 3 -#define TM5600_BOARD_10MOONS_UT821 4 -#define TM5600_BOARD_10MOONS_UT330 5 -#define TM6000_BOARD_ADSTECH_DUAL_TV 6 -#define TM6000_BOARD_FREECOM_AND_SIMILAR 7 -#define TM6000_BOARD_ADSTECH_MINI_DUAL_TV 8 -#define TM6010_BOARD_HAUPPAUGE_900H 9 -#define TM6010_BOARD_BEHOLD_WANDER 10 -#define TM6010_BOARD_BEHOLD_VOYAGER 11 -#define TM6010_BOARD_TERRATEC_CINERGY_HYBRID_XE 12 -#define TM6010_BOARD_TWINHAN_TU501 13 -#define TM6010_BOARD_BEHOLD_WANDER_LITE 14 -#define TM6010_BOARD_BEHOLD_VOYAGER_LITE 15 -#define TM5600_BOARD_TERRATEC_GRABSTER 16 - -#define is_generic(model) ((model == TM6000_BOARD_UNKNOWN) || \ - (model == TM5600_BOARD_GENERIC) || \ - (model == TM6000_BOARD_GENERIC) || \ - (model == TM6010_BOARD_GENERIC)) - -#define TM6000_MAXBOARDS 16 -static unsigned int card[] = {[0 ... (TM6000_MAXBOARDS - 1)] = UNSET }; - -module_param_array(card, int, NULL, 0444); - -static unsigned long tm6000_devused; - - -struct tm6000_board { - char *name; - char eename[16]; /* EEPROM name */ - unsigned eename_size; /* size of EEPROM name */ - unsigned eename_pos; /* Position where it appears at ROM */ - - struct tm6000_capabilities caps; - - enum tm6000_devtype type; /* variant of the chipset */ - int tuner_type; /* type of the tuner */ - int tuner_addr; /* tuner address */ - int demod_addr; /* demodulator address */ - - struct tm6000_gpio gpio; - - struct tm6000_input vinput[3]; - struct tm6000_input rinput; - - char *ir_codes; -}; - -static struct tm6000_board tm6000_boards[] = { - [TM6000_BOARD_UNKNOWN] = { - .name = "Unknown tm6000 video grabber", - .caps = { - .has_tuner = 1, - .has_eeprom = 1, - }, - .gpio = { - .tuner_reset = TM6000_GPIO_1, - }, - .vinput = { { - .type = TM6000_INPUT_TV, - .vmux = TM6000_VMUX_VIDEO_B, - .amux = TM6000_AMUX_ADC1, - }, { - .type = TM6000_INPUT_COMPOSITE1, - .vmux = TM6000_VMUX_VIDEO_A, - .amux = TM6000_AMUX_ADC2, - }, { - .type = TM6000_INPUT_SVIDEO, - .vmux = TM6000_VMUX_VIDEO_AB, - .amux = TM6000_AMUX_ADC2, - }, - }, - }, - [TM5600_BOARD_GENERIC] = { - .name = "Generic tm5600 board", - .type = TM5600, - .tuner_type = TUNER_XC2028, - .tuner_addr = 0xc2 >> 1, - .caps = { - .has_tuner = 1, - .has_eeprom = 1, - }, - .gpio = { - .tuner_reset = TM6000_GPIO_1, - }, - .vinput = { { - .type = TM6000_INPUT_TV, - .vmux = TM6000_VMUX_VIDEO_B, - .amux = TM6000_AMUX_ADC1, - }, { - .type = TM6000_INPUT_COMPOSITE1, - .vmux = TM6000_VMUX_VIDEO_A, - .amux = TM6000_AMUX_ADC2, - }, { - .type = TM6000_INPUT_SVIDEO, - .vmux = TM6000_VMUX_VIDEO_AB, - .amux = TM6000_AMUX_ADC2, - }, - }, - }, - [TM6000_BOARD_GENERIC] = { - .name = "Generic tm6000 board", - .tuner_type = TUNER_XC2028, - .tuner_addr = 0xc2 >> 1, - .caps = { - .has_tuner = 1, - .has_eeprom = 1, - }, - .gpio = { - .tuner_reset = TM6000_GPIO_1, - }, - .vinput = { { - .type = TM6000_INPUT_TV, - .vmux = TM6000_VMUX_VIDEO_B, - .amux = TM6000_AMUX_ADC1, - }, { - .type = TM6000_INPUT_COMPOSITE1, - .vmux = TM6000_VMUX_VIDEO_A, - .amux = TM6000_AMUX_ADC2, - }, { - .type = TM6000_INPUT_SVIDEO, - .vmux = TM6000_VMUX_VIDEO_AB, - .amux = TM6000_AMUX_ADC2, - }, - }, - }, - [TM6010_BOARD_GENERIC] = { - .name = "Generic tm6010 board", - .type = TM6010, - .tuner_type = TUNER_XC2028, - .tuner_addr = 0xc2 >> 1, - .demod_addr = 0x1e >> 1, - .caps = { - .has_tuner = 1, - .has_dvb = 1, - .has_zl10353 = 1, - .has_eeprom = 1, - .has_remote = 1, - }, - .gpio = { - .tuner_reset = TM6010_GPIO_2, - .tuner_on = TM6010_GPIO_3, - .demod_reset = TM6010_GPIO_1, - .demod_on = TM6010_GPIO_4, - .power_led = TM6010_GPIO_7, - .dvb_led = TM6010_GPIO_5, - .ir = TM6010_GPIO_0, - }, - .vinput = { { - .type = TM6000_INPUT_TV, - .vmux = TM6000_VMUX_VIDEO_B, - .amux = TM6000_AMUX_SIF1, - }, { - .type = TM6000_INPUT_COMPOSITE1, - .vmux = TM6000_VMUX_VIDEO_A, - .amux = TM6000_AMUX_ADC2, - }, { - .type = TM6000_INPUT_SVIDEO, - .vmux = TM6000_VMUX_VIDEO_AB, - .amux = TM6000_AMUX_ADC2, - }, - }, - }, - [TM5600_BOARD_10MOONS_UT821] = { - .name = "10Moons UT 821", - .tuner_type = TUNER_XC2028, - .eename = { '1', '0', 'M', 'O', 'O', 'N', 'S', '5', '6', '0', '0', 0xff, 0x45, 0x5b}, - .eename_size = 14, - .eename_pos = 0x14, - .type = TM5600, - .tuner_addr = 0xc2 >> 1, - .caps = { - .has_tuner = 1, - .has_eeprom = 1, - }, - .gpio = { - .tuner_reset = TM6000_GPIO_1, - }, - .vinput = { { - .type = TM6000_INPUT_TV, - .vmux = TM6000_VMUX_VIDEO_B, - .amux = TM6000_AMUX_ADC1, - }, { - .type = TM6000_INPUT_COMPOSITE1, - .vmux = TM6000_VMUX_VIDEO_A, - .amux = TM6000_AMUX_ADC2, - }, { - .type = TM6000_INPUT_SVIDEO, - .vmux = TM6000_VMUX_VIDEO_AB, - .amux = TM6000_AMUX_ADC2, - }, - }, - }, - [TM5600_BOARD_10MOONS_UT330] = { - .name = "10Moons UT 330", - .tuner_type = TUNER_PHILIPS_FQ1216AME_MK4, - .tuner_addr = 0xc8 >> 1, - .caps = { - .has_tuner = 1, - .has_dvb = 0, - .has_zl10353 = 0, - .has_eeprom = 1, - }, - .vinput = { { - .type = TM6000_INPUT_TV, - .vmux = TM6000_VMUX_VIDEO_B, - .amux = TM6000_AMUX_ADC1, - }, { - .type = TM6000_INPUT_COMPOSITE1, - .vmux = TM6000_VMUX_VIDEO_A, - .amux = TM6000_AMUX_ADC2, - }, { - .type = TM6000_INPUT_SVIDEO, - .vmux = TM6000_VMUX_VIDEO_AB, - .amux = TM6000_AMUX_ADC2, - }, - }, - }, - [TM6000_BOARD_ADSTECH_DUAL_TV] = { - .name = "ADSTECH Dual TV USB", - .tuner_type = TUNER_XC2028, - .tuner_addr = 0xc8 >> 1, - .caps = { - .has_tuner = 1, - .has_tda9874 = 1, - .has_dvb = 1, - .has_zl10353 = 1, - .has_eeprom = 1, - }, - .vinput = { { - .type = TM6000_INPUT_TV, - .vmux = TM6000_VMUX_VIDEO_B, - .amux = TM6000_AMUX_ADC1, - }, { - .type = TM6000_INPUT_COMPOSITE1, - .vmux = TM6000_VMUX_VIDEO_A, - .amux = TM6000_AMUX_ADC2, - }, { - .type = TM6000_INPUT_SVIDEO, - .vmux = TM6000_VMUX_VIDEO_AB, - .amux = TM6000_AMUX_ADC2, - }, - }, - }, - [TM6000_BOARD_FREECOM_AND_SIMILAR] = { - .name = "Freecom Hybrid Stick / Moka DVB-T Receiver Dual", - .tuner_type = TUNER_XC2028, /* has a XC3028 */ - .tuner_addr = 0xc2 >> 1, - .demod_addr = 0x1e >> 1, - .caps = { - .has_tuner = 1, - .has_dvb = 1, - .has_zl10353 = 1, - .has_eeprom = 0, - .has_remote = 1, - }, - .gpio = { - .tuner_reset = TM6000_GPIO_4, - }, - .vinput = { { - .type = TM6000_INPUT_TV, - .vmux = TM6000_VMUX_VIDEO_B, - .amux = TM6000_AMUX_ADC1, - }, { - .type = TM6000_INPUT_COMPOSITE1, - .vmux = TM6000_VMUX_VIDEO_A, - .amux = TM6000_AMUX_ADC2, - }, { - .type = TM6000_INPUT_SVIDEO, - .vmux = TM6000_VMUX_VIDEO_AB, - .amux = TM6000_AMUX_ADC2, - }, - }, - }, - [TM6000_BOARD_ADSTECH_MINI_DUAL_TV] = { - .name = "ADSTECH Mini Dual TV USB", - .tuner_type = TUNER_XC2028, /* has a XC3028 */ - .tuner_addr = 0xc8 >> 1, - .demod_addr = 0x1e >> 1, - .caps = { - .has_tuner = 1, - .has_dvb = 1, - .has_zl10353 = 1, - .has_eeprom = 0, - }, - .gpio = { - .tuner_reset = TM6000_GPIO_4, - }, - .vinput = { { - .type = TM6000_INPUT_TV, - .vmux = TM6000_VMUX_VIDEO_B, - .amux = TM6000_AMUX_ADC1, - }, { - .type = TM6000_INPUT_COMPOSITE1, - .vmux = TM6000_VMUX_VIDEO_A, - .amux = TM6000_AMUX_ADC2, - }, { - .type = TM6000_INPUT_SVIDEO, - .vmux = TM6000_VMUX_VIDEO_AB, - .amux = TM6000_AMUX_ADC2, - }, - }, - }, - [TM6010_BOARD_HAUPPAUGE_900H] = { - .name = "Hauppauge WinTV HVR-900H / WinTV USB2-Stick", - .eename = { 'H', 0, 'V', 0, 'R', 0, '9', 0, '0', 0, '0', 0, 'H', 0 }, - .eename_size = 14, - .eename_pos = 0x42, - .tuner_type = TUNER_XC2028, /* has a XC3028 */ - .tuner_addr = 0xc2 >> 1, - .demod_addr = 0x1e >> 1, - .type = TM6010, - .ir_codes = RC_MAP_HAUPPAUGE, - .caps = { - .has_tuner = 1, - .has_dvb = 1, - .has_zl10353 = 1, - .has_eeprom = 1, - .has_remote = 1, - }, - .gpio = { - .tuner_reset = TM6010_GPIO_2, - .tuner_on = TM6010_GPIO_3, - .demod_reset = TM6010_GPIO_1, - .demod_on = TM6010_GPIO_4, - .power_led = TM6010_GPIO_7, - .dvb_led = TM6010_GPIO_5, - .ir = TM6010_GPIO_0, - }, - .vinput = { { - .type = TM6000_INPUT_TV, - .vmux = TM6000_VMUX_VIDEO_B, - .amux = TM6000_AMUX_SIF1, - }, { - .type = TM6000_INPUT_COMPOSITE1, - .vmux = TM6000_VMUX_VIDEO_A, - .amux = TM6000_AMUX_ADC2, - }, { - .type = TM6000_INPUT_SVIDEO, - .vmux = TM6000_VMUX_VIDEO_AB, - .amux = TM6000_AMUX_ADC2, - }, - }, - }, - [TM6010_BOARD_BEHOLD_WANDER] = { - .name = "Beholder Wander DVB-T/TV/FM USB2.0", - .tuner_type = TUNER_XC5000, - .tuner_addr = 0xc2 >> 1, - .demod_addr = 0x1e >> 1, - .type = TM6010, - .caps = { - .has_tuner = 1, - .has_dvb = 1, - .has_zl10353 = 1, - .has_eeprom = 1, - .has_remote = 1, - .has_radio = 1, - }, - .gpio = { - .tuner_reset = TM6010_GPIO_0, - .demod_reset = TM6010_GPIO_1, - .power_led = TM6010_GPIO_6, - }, - .vinput = { { - .type = TM6000_INPUT_TV, - .vmux = TM6000_VMUX_VIDEO_B, - .amux = TM6000_AMUX_SIF1, - }, { - .type = TM6000_INPUT_COMPOSITE1, - .vmux = TM6000_VMUX_VIDEO_A, - .amux = TM6000_AMUX_ADC2, - }, { - .type = TM6000_INPUT_SVIDEO, - .vmux = TM6000_VMUX_VIDEO_AB, - .amux = TM6000_AMUX_ADC2, - }, - }, - .rinput = { - .type = TM6000_INPUT_RADIO, - .amux = TM6000_AMUX_ADC1, - }, - }, - [TM6010_BOARD_BEHOLD_VOYAGER] = { - .name = "Beholder Voyager TV/FM USB2.0", - .tuner_type = TUNER_XC5000, - .tuner_addr = 0xc2 >> 1, - .type = TM6010, - .caps = { - .has_tuner = 1, - .has_dvb = 0, - .has_zl10353 = 0, - .has_eeprom = 1, - .has_remote = 1, - .has_radio = 1, - }, - .gpio = { - .tuner_reset = TM6010_GPIO_0, - .power_led = TM6010_GPIO_6, - }, - .vinput = { { - .type = TM6000_INPUT_TV, - .vmux = TM6000_VMUX_VIDEO_B, - .amux = TM6000_AMUX_SIF1, - }, { - .type = TM6000_INPUT_COMPOSITE1, - .vmux = TM6000_VMUX_VIDEO_A, - .amux = TM6000_AMUX_ADC2, - }, { - .type = TM6000_INPUT_SVIDEO, - .vmux = TM6000_VMUX_VIDEO_AB, - .amux = TM6000_AMUX_ADC2, - }, - }, - .rinput = { - .type = TM6000_INPUT_RADIO, - .amux = TM6000_AMUX_ADC1, - }, - }, - [TM6010_BOARD_TERRATEC_CINERGY_HYBRID_XE] = { - .name = "Terratec Cinergy Hybrid XE / Cinergy Hybrid-Stick", - .tuner_type = TUNER_XC2028, /* has a XC3028 */ - .tuner_addr = 0xc2 >> 1, - .demod_addr = 0x1e >> 1, - .type = TM6010, - .caps = { - .has_tuner = 1, - .has_dvb = 1, - .has_zl10353 = 1, - .has_eeprom = 1, - .has_remote = 1, - .has_radio = 1, - }, - .gpio = { - .tuner_reset = TM6010_GPIO_2, - .tuner_on = TM6010_GPIO_3, - .demod_reset = TM6010_GPIO_1, - .demod_on = TM6010_GPIO_4, - .power_led = TM6010_GPIO_7, - .dvb_led = TM6010_GPIO_5, - .ir = TM6010_GPIO_0, - }, - .ir_codes = RC_MAP_NEC_TERRATEC_CINERGY_XS, - .vinput = { { - .type = TM6000_INPUT_TV, - .vmux = TM6000_VMUX_VIDEO_B, - .amux = TM6000_AMUX_SIF1, - }, { - .type = TM6000_INPUT_COMPOSITE1, - .vmux = TM6000_VMUX_VIDEO_A, - .amux = TM6000_AMUX_ADC2, - }, { - .type = TM6000_INPUT_SVIDEO, - .vmux = TM6000_VMUX_VIDEO_AB, - .amux = TM6000_AMUX_ADC2, - }, - }, - .rinput = { - .type = TM6000_INPUT_RADIO, - .amux = TM6000_AMUX_SIF1, - }, - }, - [TM5600_BOARD_TERRATEC_GRABSTER] = { - .name = "Terratec Grabster AV 150/250 MX", - .type = TM5600, - .tuner_type = TUNER_ABSENT, - .vinput = { { - .type = TM6000_INPUT_TV, - .vmux = TM6000_VMUX_VIDEO_B, - .amux = TM6000_AMUX_ADC1, - }, { - .type = TM6000_INPUT_COMPOSITE1, - .vmux = TM6000_VMUX_VIDEO_A, - .amux = TM6000_AMUX_ADC2, - }, { - .type = TM6000_INPUT_SVIDEO, - .vmux = TM6000_VMUX_VIDEO_AB, - .amux = TM6000_AMUX_ADC2, - }, - }, - }, - [TM6010_BOARD_TWINHAN_TU501] = { - .name = "Twinhan TU501(704D1)", - .tuner_type = TUNER_XC2028, /* has a XC3028 */ - .tuner_addr = 0xc2 >> 1, - .demod_addr = 0x1e >> 1, - .type = TM6010, - .caps = { - .has_tuner = 1, - .has_dvb = 1, - .has_zl10353 = 1, - .has_eeprom = 1, - .has_remote = 1, - }, - .gpio = { - .tuner_reset = TM6010_GPIO_2, - .tuner_on = TM6010_GPIO_3, - .demod_reset = TM6010_GPIO_1, - .demod_on = TM6010_GPIO_4, - .power_led = TM6010_GPIO_7, - .dvb_led = TM6010_GPIO_5, - .ir = TM6010_GPIO_0, - }, - .vinput = { { - .type = TM6000_INPUT_TV, - .vmux = TM6000_VMUX_VIDEO_B, - .amux = TM6000_AMUX_SIF1, - }, { - .type = TM6000_INPUT_COMPOSITE1, - .vmux = TM6000_VMUX_VIDEO_A, - .amux = TM6000_AMUX_ADC2, - }, { - .type = TM6000_INPUT_SVIDEO, - .vmux = TM6000_VMUX_VIDEO_AB, - .amux = TM6000_AMUX_ADC2, - }, - }, - }, - [TM6010_BOARD_BEHOLD_WANDER_LITE] = { - .name = "Beholder Wander Lite DVB-T/TV/FM USB2.0", - .tuner_type = TUNER_XC5000, - .tuner_addr = 0xc2 >> 1, - .demod_addr = 0x1e >> 1, - .type = TM6010, - .caps = { - .has_tuner = 1, - .has_dvb = 1, - .has_zl10353 = 1, - .has_eeprom = 1, - .has_remote = 0, - .has_radio = 1, - }, - .gpio = { - .tuner_reset = TM6010_GPIO_0, - .demod_reset = TM6010_GPIO_1, - .power_led = TM6010_GPIO_6, - }, - .vinput = { { - .type = TM6000_INPUT_TV, - .vmux = TM6000_VMUX_VIDEO_B, - .amux = TM6000_AMUX_SIF1, - }, - }, - .rinput = { - .type = TM6000_INPUT_RADIO, - .amux = TM6000_AMUX_ADC1, - }, - }, - [TM6010_BOARD_BEHOLD_VOYAGER_LITE] = { - .name = "Beholder Voyager Lite TV/FM USB2.0", - .tuner_type = TUNER_XC5000, - .tuner_addr = 0xc2 >> 1, - .type = TM6010, - .caps = { - .has_tuner = 1, - .has_dvb = 0, - .has_zl10353 = 0, - .has_eeprom = 1, - .has_remote = 0, - .has_radio = 1, - }, - .gpio = { - .tuner_reset = TM6010_GPIO_0, - .power_led = TM6010_GPIO_6, - }, - .vinput = { { - .type = TM6000_INPUT_TV, - .vmux = TM6000_VMUX_VIDEO_B, - .amux = TM6000_AMUX_SIF1, - }, - }, - .rinput = { - .type = TM6000_INPUT_RADIO, - .amux = TM6000_AMUX_ADC1, - }, - }, -}; - -/* table of devices that work with this driver */ -static const struct usb_device_id tm6000_id_table[] = { - { USB_DEVICE(0x6000, 0x0001), .driver_info = TM5600_BOARD_GENERIC }, - { USB_DEVICE(0x6000, 0x0002), .driver_info = TM6010_BOARD_GENERIC }, - { USB_DEVICE(0x06e1, 0xf332), .driver_info = TM6000_BOARD_ADSTECH_DUAL_TV }, - { USB_DEVICE(0x14aa, 0x0620), .driver_info = TM6000_BOARD_FREECOM_AND_SIMILAR }, - { USB_DEVICE(0x06e1, 0xb339), .driver_info = TM6000_BOARD_ADSTECH_MINI_DUAL_TV }, - { USB_DEVICE(0x2040, 0x6600), .driver_info = TM6010_BOARD_HAUPPAUGE_900H }, - { USB_DEVICE(0x2040, 0x6601), .driver_info = TM6010_BOARD_HAUPPAUGE_900H }, - { USB_DEVICE(0x2040, 0x6610), .driver_info = TM6010_BOARD_HAUPPAUGE_900H }, - { USB_DEVICE(0x2040, 0x6611), .driver_info = TM6010_BOARD_HAUPPAUGE_900H }, - { USB_DEVICE(0x6000, 0xdec0), .driver_info = TM6010_BOARD_BEHOLD_WANDER }, - { USB_DEVICE(0x6000, 0xdec1), .driver_info = TM6010_BOARD_BEHOLD_VOYAGER }, - { USB_DEVICE(0x0ccd, 0x0086), .driver_info = TM6010_BOARD_TERRATEC_CINERGY_HYBRID_XE }, - { USB_DEVICE(0x0ccd, 0x00A5), .driver_info = TM6010_BOARD_TERRATEC_CINERGY_HYBRID_XE }, - { USB_DEVICE(0x0ccd, 0x0079), .driver_info = TM5600_BOARD_TERRATEC_GRABSTER }, - { USB_DEVICE(0x13d3, 0x3240), .driver_info = TM6010_BOARD_TWINHAN_TU501 }, - { USB_DEVICE(0x13d3, 0x3241), .driver_info = TM6010_BOARD_TWINHAN_TU501 }, - { USB_DEVICE(0x13d3, 0x3243), .driver_info = TM6010_BOARD_TWINHAN_TU501 }, - { USB_DEVICE(0x13d3, 0x3264), .driver_info = TM6010_BOARD_TWINHAN_TU501 }, - { USB_DEVICE(0x6000, 0xdec2), .driver_info = TM6010_BOARD_BEHOLD_WANDER_LITE }, - { USB_DEVICE(0x6000, 0xdec3), .driver_info = TM6010_BOARD_BEHOLD_VOYAGER_LITE }, - { } -}; -MODULE_DEVICE_TABLE(usb, tm6000_id_table); - -/* Control power led for show some activity */ -void tm6000_flash_led(struct tm6000_core *dev, u8 state) -{ - /* Power LED unconfigured */ - if (!dev->gpio.power_led) - return; - - /* ON Power LED */ - if (state) { - switch (dev->model) { - case TM6010_BOARD_HAUPPAUGE_900H: - case TM6010_BOARD_TERRATEC_CINERGY_HYBRID_XE: - case TM6010_BOARD_TWINHAN_TU501: - tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, - dev->gpio.power_led, 0x00); - break; - case TM6010_BOARD_BEHOLD_WANDER: - case TM6010_BOARD_BEHOLD_VOYAGER: - case TM6010_BOARD_BEHOLD_WANDER_LITE: - case TM6010_BOARD_BEHOLD_VOYAGER_LITE: - tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, - dev->gpio.power_led, 0x01); - break; - } - } - /* OFF Power LED */ - else { - switch (dev->model) { - case TM6010_BOARD_HAUPPAUGE_900H: - case TM6010_BOARD_TERRATEC_CINERGY_HYBRID_XE: - case TM6010_BOARD_TWINHAN_TU501: - tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, - dev->gpio.power_led, 0x01); - break; - case TM6010_BOARD_BEHOLD_WANDER: - case TM6010_BOARD_BEHOLD_VOYAGER: - case TM6010_BOARD_BEHOLD_WANDER_LITE: - case TM6010_BOARD_BEHOLD_VOYAGER_LITE: - tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, - dev->gpio.power_led, 0x00); - break; - } - } -} - -/* Tuner callback to provide the proper gpio changes needed for xc5000 */ -int tm6000_xc5000_callback(void *ptr, int component, int command, int arg) -{ - int rc = 0; - struct tm6000_core *dev = ptr; - - if (dev->tuner_type != TUNER_XC5000) - return 0; - - switch (command) { - case XC5000_TUNER_RESET: - tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, - dev->gpio.tuner_reset, 0x01); - msleep(15); - tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, - dev->gpio.tuner_reset, 0x00); - msleep(15); - tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, - dev->gpio.tuner_reset, 0x01); - break; - } - return rc; -} -EXPORT_SYMBOL_GPL(tm6000_xc5000_callback); - -/* Tuner callback to provide the proper gpio changes needed for xc2028 */ - -int tm6000_tuner_callback(void *ptr, int component, int command, int arg) -{ - int rc = 0; - struct tm6000_core *dev = ptr; - - if (dev->tuner_type != TUNER_XC2028) - return 0; - - switch (command) { - case XC2028_RESET_CLK: - tm6000_ir_wait(dev, 0); - - tm6000_set_reg(dev, REQ_04_EN_DISABLE_MCU_INT, - 0x02, arg); - msleep(10); - rc = tm6000_i2c_reset(dev, 10); - break; - case XC2028_TUNER_RESET: - /* Reset codes during load firmware */ - switch (arg) { - case 0: - /* newer tuner can faster reset */ - switch (dev->model) { - case TM5600_BOARD_10MOONS_UT821: - tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, - dev->gpio.tuner_reset, 0x01); - tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, - 0x300, 0x01); - msleep(10); - tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, - dev->gpio.tuner_reset, 0x00); - tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, - 0x300, 0x00); - msleep(10); - tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, - dev->gpio.tuner_reset, 0x01); - tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, - 0x300, 0x01); - break; - case TM6010_BOARD_HAUPPAUGE_900H: - case TM6010_BOARD_TERRATEC_CINERGY_HYBRID_XE: - case TM6010_BOARD_TWINHAN_TU501: - tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, - dev->gpio.tuner_reset, 0x01); - msleep(60); - tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, - dev->gpio.tuner_reset, 0x00); - msleep(75); - tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, - dev->gpio.tuner_reset, 0x01); - msleep(60); - break; - default: - tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, - dev->gpio.tuner_reset, 0x00); - msleep(130); - tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, - dev->gpio.tuner_reset, 0x01); - msleep(130); - break; - } - - tm6000_ir_wait(dev, 1); - break; - case 1: - tm6000_set_reg(dev, REQ_04_EN_DISABLE_MCU_INT, - 0x02, 0x01); - msleep(10); - break; - case 2: - rc = tm6000_i2c_reset(dev, 100); - break; - } - break; - case XC2028_I2C_FLUSH: - tm6000_set_reg(dev, REQ_50_SET_START, 0, 0); - tm6000_set_reg(dev, REQ_51_SET_STOP, 0, 0); - break; - } - return rc; -} -EXPORT_SYMBOL_GPL(tm6000_tuner_callback); - -int tm6000_cards_setup(struct tm6000_core *dev) -{ - /* - * Board-specific initialization sequence. Handles all GPIO - * initialization sequences that are board-specific. - * Up to now, all found devices use GPIO1 and GPIO4 at the same way. - * Probably, they're all based on some reference device. Due to that, - * there's a common routine at the end to handle those GPIO's. Devices - * that use different pinups or init sequences can just return at - * the board-specific session. - */ - switch (dev->model) { - case TM6010_BOARD_HAUPPAUGE_900H: - case TM6010_BOARD_TERRATEC_CINERGY_HYBRID_XE: - case TM6010_BOARD_TWINHAN_TU501: - case TM6010_BOARD_GENERIC: - /* Turn xceive 3028 on */ - tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, dev->gpio.tuner_on, 0x01); - msleep(15); - /* Turn zarlink zl10353 on */ - tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, dev->gpio.demod_on, 0x00); - msleep(15); - /* Reset zarlink zl10353 */ - tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, dev->gpio.demod_reset, 0x00); - msleep(50); - tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, dev->gpio.demod_reset, 0x01); - msleep(15); - /* Turn zarlink zl10353 off */ - tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, dev->gpio.demod_on, 0x01); - msleep(15); - /* ir ? */ - tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, dev->gpio.ir, 0x01); - msleep(15); - /* Power led on (blue) */ - tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, dev->gpio.power_led, 0x00); - msleep(15); - /* DVB led off (orange) */ - tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, dev->gpio.dvb_led, 0x01); - msleep(15); - /* Turn zarlink zl10353 on */ - tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, dev->gpio.demod_on, 0x00); - msleep(15); - break; - case TM6010_BOARD_BEHOLD_WANDER: - case TM6010_BOARD_BEHOLD_WANDER_LITE: - /* Power led on (blue) */ - tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, dev->gpio.power_led, 0x01); - msleep(15); - /* Reset zarlink zl10353 */ - tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, dev->gpio.demod_reset, 0x00); - msleep(50); - tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, dev->gpio.demod_reset, 0x01); - msleep(15); - break; - case TM6010_BOARD_BEHOLD_VOYAGER: - case TM6010_BOARD_BEHOLD_VOYAGER_LITE: - /* Power led on (blue) */ - tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, dev->gpio.power_led, 0x01); - msleep(15); - break; - default: - break; - } - - /* - * Default initialization. Most of the devices seem to use GPIO1 - * and GPIO4.on the same way, so, this handles the common sequence - * used by most devices. - * If a device uses a different sequence or different GPIO pins for - * reset, just add the code at the board-specific part - */ - - if (dev->gpio.tuner_reset) { - int rc; - int i; - - for (i = 0; i < 2; i++) { - rc = tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, - dev->gpio.tuner_reset, 0x00); - if (rc < 0) { - printk(KERN_ERR "Error %i doing tuner reset\n", rc); - return rc; - } - - msleep(10); /* Just to be conservative */ - rc = tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, - dev->gpio.tuner_reset, 0x01); - if (rc < 0) { - printk(KERN_ERR "Error %i doing tuner reset\n", rc); - return rc; - } - } - } else { - printk(KERN_ERR "Tuner reset is not configured\n"); - return -1; - } - - msleep(50); - - return 0; -}; - -static void tm6000_config_tuner(struct tm6000_core *dev) -{ - struct tuner_setup tun_setup; - - /* Load tuner module */ - v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap, - "tuner", dev->tuner_addr, NULL); - - memset(&tun_setup, 0, sizeof(tun_setup)); - tun_setup.type = dev->tuner_type; - tun_setup.addr = dev->tuner_addr; - - tun_setup.mode_mask = 0; - if (dev->caps.has_tuner) - tun_setup.mode_mask |= (T_ANALOG_TV | T_RADIO); - - switch (dev->tuner_type) { - case TUNER_XC2028: - tun_setup.tuner_callback = tm6000_tuner_callback; - break; - case TUNER_XC5000: - tun_setup.tuner_callback = tm6000_xc5000_callback; - break; - } - - v4l2_device_call_all(&dev->v4l2_dev, 0, tuner, s_type_addr, &tun_setup); - - switch (dev->tuner_type) { - case TUNER_XC2028: { - struct v4l2_priv_tun_config xc2028_cfg; - struct xc2028_ctrl ctl; - - memset(&xc2028_cfg, 0, sizeof(xc2028_cfg)); - memset(&ctl, 0, sizeof(ctl)); - - ctl.demod = XC3028_FE_ZARLINK456; - - xc2028_cfg.tuner = TUNER_XC2028; - xc2028_cfg.priv = &ctl; - - switch (dev->model) { - case TM6010_BOARD_HAUPPAUGE_900H: - case TM6010_BOARD_TERRATEC_CINERGY_HYBRID_XE: - case TM6010_BOARD_TWINHAN_TU501: - ctl.max_len = 80; - ctl.fname = "xc3028L-v36.fw"; - break; - default: - if (dev->dev_type == TM6010) - ctl.fname = "xc3028-v27.fw"; - else - ctl.fname = "xc3028-v24.fw"; - } - - printk(KERN_INFO "Setting firmware parameters for xc2028\n"); - v4l2_device_call_all(&dev->v4l2_dev, 0, tuner, s_config, - &xc2028_cfg); - - } - break; - case TUNER_XC5000: - { - struct v4l2_priv_tun_config xc5000_cfg; - struct xc5000_config ctl = { - .i2c_address = dev->tuner_addr, - .if_khz = 4570, - .radio_input = XC5000_RADIO_FM1_MONO, - }; - - xc5000_cfg.tuner = TUNER_XC5000; - xc5000_cfg.priv = &ctl; - - v4l2_device_call_all(&dev->v4l2_dev, 0, tuner, s_config, - &xc5000_cfg); - } - break; - default: - printk(KERN_INFO "Unknown tuner type. Tuner is not configured.\n"); - break; - } -} - -static int fill_board_specific_data(struct tm6000_core *dev) -{ - int rc; - - dev->dev_type = tm6000_boards[dev->model].type; - dev->tuner_type = tm6000_boards[dev->model].tuner_type; - dev->tuner_addr = tm6000_boards[dev->model].tuner_addr; - - dev->gpio = tm6000_boards[dev->model].gpio; - - dev->ir_codes = tm6000_boards[dev->model].ir_codes; - - dev->demod_addr = tm6000_boards[dev->model].demod_addr; - - dev->caps = tm6000_boards[dev->model].caps; - - dev->vinput[0] = tm6000_boards[dev->model].vinput[0]; - dev->vinput[1] = tm6000_boards[dev->model].vinput[1]; - dev->vinput[2] = tm6000_boards[dev->model].vinput[2]; - dev->rinput = tm6000_boards[dev->model].rinput; - - /* setup per-model quirks */ - switch (dev->model) { - case TM6010_BOARD_TERRATEC_CINERGY_HYBRID_XE: - case TM6010_BOARD_HAUPPAUGE_900H: - dev->quirks |= TM6000_QUIRK_NO_USB_DELAY; - break; - - default: - break; - } - - /* initialize hardware */ - rc = tm6000_init(dev); - if (rc < 0) - return rc; - - return v4l2_device_register(&dev->udev->dev, &dev->v4l2_dev); -} - - -static void use_alternative_detection_method(struct tm6000_core *dev) -{ - int i, model = -1; - - if (!dev->eedata_size) - return; - - for (i = 0; i < ARRAY_SIZE(tm6000_boards); i++) { - if (!tm6000_boards[i].eename_size) - continue; - if (dev->eedata_size < tm6000_boards[i].eename_pos + - tm6000_boards[i].eename_size) - continue; - - if (!memcmp(&dev->eedata[tm6000_boards[i].eename_pos], - tm6000_boards[i].eename, - tm6000_boards[i].eename_size)) { - model = i; - break; - } - } - if (model < 0) { - printk(KERN_INFO "Device has eeprom but is currently unknown\n"); - return; - } - - dev->model = model; - - printk(KERN_INFO "Device identified via eeprom as %s (type = %d)\n", - tm6000_boards[model].name, model); -} - -#if defined(CONFIG_MODULES) && defined(MODULE) -static void request_module_async(struct work_struct *work) -{ - struct tm6000_core *dev = container_of(work, struct tm6000_core, - request_module_wk); - - request_module("tm6000-alsa"); - - if (dev->caps.has_dvb) - request_module("tm6000-dvb"); -} - -static void request_modules(struct tm6000_core *dev) -{ - INIT_WORK(&dev->request_module_wk, request_module_async); - schedule_work(&dev->request_module_wk); -} - -static void flush_request_modules(struct tm6000_core *dev) -{ - flush_work(&dev->request_module_wk); -} -#else -#define request_modules(dev) -#define flush_request_modules(dev) -#endif /* CONFIG_MODULES */ - -static int tm6000_init_dev(struct tm6000_core *dev) -{ - struct v4l2_frequency f; - int rc = 0; - - mutex_init(&dev->lock); - mutex_lock(&dev->lock); - - if (!is_generic(dev->model)) { - rc = fill_board_specific_data(dev); - if (rc < 0) - goto err; - - /* register i2c bus */ - rc = tm6000_i2c_register(dev); - if (rc < 0) - goto err; - } else { - /* register i2c bus */ - rc = tm6000_i2c_register(dev); - if (rc < 0) - goto err; - - use_alternative_detection_method(dev); - - rc = fill_board_specific_data(dev); - if (rc < 0) - goto err; - } - - /* Default values for STD and resolutions */ - dev->width = 720; - dev->height = 480; - dev->norm = V4L2_STD_NTSC_M; - - /* Configure tuner */ - tm6000_config_tuner(dev); - - /* Set video standard */ - v4l2_device_call_all(&dev->v4l2_dev, 0, video, s_std, dev->norm); - - /* Set tuner frequency - also loads firmware on xc2028/xc3028 */ - f.tuner = 0; - f.type = V4L2_TUNER_ANALOG_TV; - f.frequency = 3092; /* 193.25 MHz */ - dev->freq = f.frequency; - v4l2_device_call_all(&dev->v4l2_dev, 0, tuner, s_frequency, &f); - - if (dev->caps.has_tda9874) - v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap, - "tvaudio", I2C_ADDR_TDA9874, NULL); - - /* register and initialize V4L2 */ - rc = tm6000_v4l2_register(dev); - if (rc < 0) - goto err; - - tm6000_add_into_devlist(dev); - tm6000_init_extension(dev); - - tm6000_ir_init(dev); - - request_modules(dev); - - mutex_unlock(&dev->lock); - return 0; - -err: - mutex_unlock(&dev->lock); - return rc; -} - -/* high bandwidth multiplier, as encoded in highspeed endpoint descriptors */ -#define hb_mult(wMaxPacketSize) (1 + (((wMaxPacketSize) >> 11) & 0x03)) - -static void get_max_endpoint(struct usb_device *udev, - struct usb_host_interface *alt, - char *msgtype, - struct usb_host_endpoint *curr_e, - struct tm6000_endpoint *tm_ep) -{ - u16 tmp = le16_to_cpu(curr_e->desc.wMaxPacketSize); - unsigned int size = tmp & 0x7ff; - - if (udev->speed == USB_SPEED_HIGH) - size = size * hb_mult(tmp); - - if (size > tm_ep->maxsize) { - tm_ep->endp = curr_e; - tm_ep->maxsize = size; - tm_ep->bInterfaceNumber = alt->desc.bInterfaceNumber; - tm_ep->bAlternateSetting = alt->desc.bAlternateSetting; - - printk(KERN_INFO "tm6000: %s endpoint: 0x%02x (max size=%u bytes)\n", - msgtype, curr_e->desc.bEndpointAddress, - size); - } -} - -/* - * tm6000_usb_probe() - * checks for supported devices - */ -static int tm6000_usb_probe(struct usb_interface *interface, - const struct usb_device_id *id) -{ - struct usb_device *usbdev; - struct tm6000_core *dev; - int i, rc; - int nr = 0; - char *speed; - - usbdev = usb_get_dev(interface_to_usbdev(interface)); - - /* Selects the proper interface */ - rc = usb_set_interface(usbdev, 0, 1); - if (rc < 0) - goto report_failure; - - /* Check to see next free device and mark as used */ - nr = find_first_zero_bit(&tm6000_devused, TM6000_MAXBOARDS); - if (nr >= TM6000_MAXBOARDS) { - printk(KERN_ERR "tm6000: Supports only %i tm60xx boards.\n", TM6000_MAXBOARDS); - rc = -ENOMEM; - goto put_device; - } - - /* Create and initialize dev struct */ - dev = kzalloc(sizeof(*dev), GFP_KERNEL); - if (!dev) { - rc = -ENOMEM; - goto put_device; - } - spin_lock_init(&dev->slock); - mutex_init(&dev->usb_lock); - - /* Increment usage count */ - set_bit(nr, &tm6000_devused); - snprintf(dev->name, 29, "tm6000 #%d", nr); - - dev->model = id->driver_info; - if (card[nr] < ARRAY_SIZE(tm6000_boards)) - dev->model = card[nr]; - - dev->udev = usbdev; - dev->devno = nr; - - switch (usbdev->speed) { - case USB_SPEED_LOW: - speed = "1.5"; - break; - case USB_SPEED_UNKNOWN: - case USB_SPEED_FULL: - speed = "12"; - break; - case USB_SPEED_HIGH: - speed = "480"; - break; - default: - speed = "unknown"; - } - - /* Get endpoints */ - for (i = 0; i < interface->num_altsetting; i++) { - int ep; - - for (ep = 0; ep < interface->altsetting[i].desc.bNumEndpoints; ep++) { - struct usb_host_endpoint *e; - int dir_out; - - e = &interface->altsetting[i].endpoint[ep]; - - dir_out = ((e->desc.bEndpointAddress & - USB_ENDPOINT_DIR_MASK) == USB_DIR_OUT); - - printk(KERN_INFO "tm6000: alt %d, interface %i, class %i\n", - i, - interface->altsetting[i].desc.bInterfaceNumber, - interface->altsetting[i].desc.bInterfaceClass); - - switch (e->desc.bmAttributes) { - case USB_ENDPOINT_XFER_BULK: - if (!dir_out) { - get_max_endpoint(usbdev, - &interface->altsetting[i], - "Bulk IN", e, - &dev->bulk_in); - } else { - get_max_endpoint(usbdev, - &interface->altsetting[i], - "Bulk OUT", e, - &dev->bulk_out); - } - break; - case USB_ENDPOINT_XFER_ISOC: - if (!dir_out) { - get_max_endpoint(usbdev, - &interface->altsetting[i], - "ISOC IN", e, - &dev->isoc_in); - } else { - get_max_endpoint(usbdev, - &interface->altsetting[i], - "ISOC OUT", e, - &dev->isoc_out); - } - break; - case USB_ENDPOINT_XFER_INT: - if (!dir_out) { - get_max_endpoint(usbdev, - &interface->altsetting[i], - "INT IN", e, - &dev->int_in); - } else { - get_max_endpoint(usbdev, - &interface->altsetting[i], - "INT OUT", e, - &dev->int_out); - } - break; - } - } - } - - - printk(KERN_INFO "tm6000: New video device @ %s Mbps (%04x:%04x, ifnum %d)\n", - speed, - le16_to_cpu(dev->udev->descriptor.idVendor), - le16_to_cpu(dev->udev->descriptor.idProduct), - interface->altsetting->desc.bInterfaceNumber); - -/* check if the the device has the iso in endpoint at the correct place */ - if (!dev->isoc_in.endp) { - printk(KERN_ERR "tm6000: probing error: no IN ISOC endpoint!\n"); - rc = -ENODEV; - goto free_device; - } - - /* save our data pointer in this interface device */ - usb_set_intfdata(interface, dev); - - printk(KERN_INFO "tm6000: Found %s\n", tm6000_boards[dev->model].name); - - rc = tm6000_init_dev(dev); - if (rc < 0) - goto free_device; - - return 0; - -free_device: - kfree(dev); -report_failure: - printk(KERN_ERR "tm6000: Error %d while registering\n", rc); - - clear_bit(nr, &tm6000_devused); -put_device: - usb_put_dev(usbdev); - return rc; -} - -/* - * tm6000_usb_disconnect() - * called when the device gets disconnected - * video device will be unregistered on v4l2_close in case it is still open - */ -static void tm6000_usb_disconnect(struct usb_interface *interface) -{ - struct tm6000_core *dev = usb_get_intfdata(interface); - usb_set_intfdata(interface, NULL); - - if (!dev) - return; - - printk(KERN_INFO "tm6000: disconnecting %s\n", dev->name); - - flush_request_modules(dev); - - tm6000_ir_fini(dev); - - if (dev->gpio.power_led) { - switch (dev->model) { - case TM6010_BOARD_HAUPPAUGE_900H: - case TM6010_BOARD_TERRATEC_CINERGY_HYBRID_XE: - case TM6010_BOARD_TWINHAN_TU501: - /* Power led off */ - tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, - dev->gpio.power_led, 0x01); - msleep(15); - break; - case TM6010_BOARD_BEHOLD_WANDER: - case TM6010_BOARD_BEHOLD_VOYAGER: - case TM6010_BOARD_BEHOLD_WANDER_LITE: - case TM6010_BOARD_BEHOLD_VOYAGER_LITE: - /* Power led off */ - tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, - dev->gpio.power_led, 0x00); - msleep(15); - break; - } - } - tm6000_v4l2_unregister(dev); - - tm6000_i2c_unregister(dev); - - v4l2_device_unregister(&dev->v4l2_dev); - - dev->state |= DEV_DISCONNECTED; - - usb_put_dev(dev->udev); - - tm6000_close_extension(dev); - tm6000_remove_from_devlist(dev); - - clear_bit(dev->devno, &tm6000_devused); - kfree(dev); -} - -static struct usb_driver tm6000_usb_driver = { - .name = "tm6000", - .probe = tm6000_usb_probe, - .disconnect = tm6000_usb_disconnect, - .id_table = tm6000_id_table, -}; - -module_usb_driver(tm6000_usb_driver); - -MODULE_DESCRIPTION("Trident TVMaster TM5600/TM6000/TM6010 USB2 adapter"); -MODULE_AUTHOR("Mauro Carvalho Chehab"); -MODULE_LICENSE("GPL v2"); diff --git a/drivers/staging/media/deprecated/tm6000/tm6000-core.c b/drivers/staging/media/deprecated/tm6000/tm6000-core.c deleted file mode 100644 index 5c8cbc5d6f72..000000000000 --- a/drivers/staging/media/deprecated/tm6000/tm6000-core.c +++ /dev/null @@ -1,916 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -// tm6000-core.c - driver for TM5600/TM6000/TM6010 USB video capture devices -// -// Copyright (c) 2006-2007 Mauro Carvalho Chehab -// -// Copyright (c) 2007 Michel Ludwig -// - DVB-T support - -#include -#include -#include -#include -#include -#include "tm6000.h" -#include "tm6000-regs.h" -#include -#include - -#define USB_TIMEOUT (5 * HZ) /* ms */ - -int tm6000_read_write_usb(struct tm6000_core *dev, u8 req_type, u8 req, - u16 value, u16 index, u8 *buf, u16 len) -{ - int ret, i; - unsigned int pipe; - u8 *data = NULL; - int delay = 5000; - - if (len) { - data = kzalloc(len, GFP_KERNEL); - if (!data) - return -ENOMEM; - } - - mutex_lock(&dev->usb_lock); - - if (req_type & USB_DIR_IN) - pipe = usb_rcvctrlpipe(dev->udev, 0); - else { - pipe = usb_sndctrlpipe(dev->udev, 0); - memcpy(data, buf, len); - } - - if (tm6000_debug & V4L2_DEBUG_I2C) { - printk(KERN_DEBUG "(dev %p, pipe %08x): ", dev->udev, pipe); - - printk(KERN_CONT "%s: %02x %02x %02x %02x %02x %02x %02x %02x ", - (req_type & USB_DIR_IN) ? " IN" : "OUT", - req_type, req, value&0xff, value>>8, index&0xff, - index>>8, len&0xff, len>>8); - - if (!(req_type & USB_DIR_IN)) { - printk(KERN_CONT ">>> "); - for (i = 0; i < len; i++) - printk(KERN_CONT " %02x", buf[i]); - printk(KERN_CONT "\n"); - } - } - - ret = usb_control_msg(dev->udev, pipe, req, req_type, value, index, - data, len, USB_TIMEOUT); - - if (req_type & USB_DIR_IN) - memcpy(buf, data, len); - - if (tm6000_debug & V4L2_DEBUG_I2C) { - if (ret < 0) { - if (req_type & USB_DIR_IN) - printk(KERN_DEBUG "<<< (len=%d)\n", len); - - printk(KERN_CONT "%s: Error #%d\n", __func__, ret); - } else if (req_type & USB_DIR_IN) { - printk(KERN_CONT "<<< "); - for (i = 0; i < len; i++) - printk(KERN_CONT " %02x", buf[i]); - printk(KERN_CONT "\n"); - } - } - - kfree(data); - - if (dev->quirks & TM6000_QUIRK_NO_USB_DELAY) - delay = 0; - - if (req == REQ_16_SET_GET_I2C_WR1_RDN && !(req_type & USB_DIR_IN)) { - unsigned int tsleep; - /* Calculate delay time, 14000us for 64 bytes */ - tsleep = (len * 200) + 200; - if (tsleep < delay) - tsleep = delay; - usleep_range(tsleep, tsleep + 1000); - } - else if (delay) - usleep_range(delay, delay + 1000); - - mutex_unlock(&dev->usb_lock); - return ret; -} - -int tm6000_set_reg(struct tm6000_core *dev, u8 req, u16 value, u16 index) -{ - return - tm6000_read_write_usb(dev, USB_DIR_OUT | USB_TYPE_VENDOR, - req, value, index, NULL, 0); -} -EXPORT_SYMBOL_GPL(tm6000_set_reg); - -int tm6000_get_reg(struct tm6000_core *dev, u8 req, u16 value, u16 index) -{ - int rc; - u8 buf[1]; - - rc = tm6000_read_write_usb(dev, USB_DIR_IN | USB_TYPE_VENDOR, req, - value, index, buf, 1); - - if (rc < 0) - return rc; - - return *buf; -} -EXPORT_SYMBOL_GPL(tm6000_get_reg); - -int tm6000_set_reg_mask(struct tm6000_core *dev, u8 req, u16 value, - u16 index, u16 mask) -{ - int rc; - u8 buf[1]; - u8 new_index; - - rc = tm6000_read_write_usb(dev, USB_DIR_IN | USB_TYPE_VENDOR, req, - value, 0, buf, 1); - - if (rc < 0) - return rc; - - new_index = (buf[0] & ~mask) | (index & mask); - - if (new_index == buf[0]) - return 0; - - return tm6000_read_write_usb(dev, USB_DIR_OUT | USB_TYPE_VENDOR, - req, value, new_index, NULL, 0); -} -EXPORT_SYMBOL_GPL(tm6000_set_reg_mask); - -int tm6000_get_reg16(struct tm6000_core *dev, u8 req, u16 value, u16 index) -{ - int rc; - u8 buf[2]; - - rc = tm6000_read_write_usb(dev, USB_DIR_IN | USB_TYPE_VENDOR, req, - value, index, buf, 2); - - if (rc < 0) - return rc; - - return buf[1]|buf[0]<<8; -} - -int tm6000_get_reg32(struct tm6000_core *dev, u8 req, u16 value, u16 index) -{ - int rc; - u8 buf[4]; - - rc = tm6000_read_write_usb(dev, USB_DIR_IN | USB_TYPE_VENDOR, req, - value, index, buf, 4); - - if (rc < 0) - return rc; - - return buf[3] | buf[2] << 8 | buf[1] << 16 | buf[0] << 24; -} - -int tm6000_i2c_reset(struct tm6000_core *dev, u16 tsleep) -{ - int rc; - - rc = tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, TM6000_GPIO_CLK, 0); - if (rc < 0) - return rc; - - msleep(tsleep); - - rc = tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, TM6000_GPIO_CLK, 1); - msleep(tsleep); - - return rc; -} - -void tm6000_set_fourcc_format(struct tm6000_core *dev) -{ - if (dev->dev_type == TM6010) { - int val; - - val = tm6000_get_reg(dev, TM6010_REQ07_RCC_ACTIVE_IF, 0) & 0xfc; - if (dev->fourcc == V4L2_PIX_FMT_UYVY) - tm6000_set_reg(dev, TM6010_REQ07_RCC_ACTIVE_IF, val); - else - tm6000_set_reg(dev, TM6010_REQ07_RCC_ACTIVE_IF, val | 1); - } else { - if (dev->fourcc == V4L2_PIX_FMT_UYVY) - tm6000_set_reg(dev, TM6010_REQ07_RC1_TRESHOLD, 0xd0); - else - tm6000_set_reg(dev, TM6010_REQ07_RC1_TRESHOLD, 0x90); - } -} - -static void tm6000_set_vbi(struct tm6000_core *dev) -{ - /* - * FIXME: - * VBI lines and start/end are different between 60Hz and 50Hz - * So, it is very likely that we need to change the config to - * something that takes it into account, doing something different - * if (dev->norm & V4L2_STD_525_60) - */ - - if (dev->dev_type == TM6010) { - tm6000_set_reg(dev, TM6010_REQ07_R3F_RESET, 0x01); - tm6000_set_reg(dev, TM6010_REQ07_R41_TELETEXT_VBI_CODE1, 0x27); - tm6000_set_reg(dev, TM6010_REQ07_R42_VBI_DATA_HIGH_LEVEL, 0x55); - tm6000_set_reg(dev, TM6010_REQ07_R43_VBI_DATA_TYPE_LINE7, 0x66); - tm6000_set_reg(dev, TM6010_REQ07_R44_VBI_DATA_TYPE_LINE8, 0x66); - tm6000_set_reg(dev, TM6010_REQ07_R45_VBI_DATA_TYPE_LINE9, 0x66); - tm6000_set_reg(dev, - TM6010_REQ07_R46_VBI_DATA_TYPE_LINE10, 0x66); - tm6000_set_reg(dev, - TM6010_REQ07_R47_VBI_DATA_TYPE_LINE11, 0x66); - tm6000_set_reg(dev, - TM6010_REQ07_R48_VBI_DATA_TYPE_LINE12, 0x66); - tm6000_set_reg(dev, - TM6010_REQ07_R49_VBI_DATA_TYPE_LINE13, 0x66); - tm6000_set_reg(dev, - TM6010_REQ07_R4A_VBI_DATA_TYPE_LINE14, 0x66); - tm6000_set_reg(dev, - TM6010_REQ07_R4B_VBI_DATA_TYPE_LINE15, 0x66); - tm6000_set_reg(dev, - TM6010_REQ07_R4C_VBI_DATA_TYPE_LINE16, 0x66); - tm6000_set_reg(dev, - TM6010_REQ07_R4D_VBI_DATA_TYPE_LINE17, 0x66); - tm6000_set_reg(dev, - TM6010_REQ07_R4E_VBI_DATA_TYPE_LINE18, 0x66); - tm6000_set_reg(dev, - TM6010_REQ07_R4F_VBI_DATA_TYPE_LINE19, 0x66); - tm6000_set_reg(dev, - TM6010_REQ07_R50_VBI_DATA_TYPE_LINE20, 0x66); - tm6000_set_reg(dev, - TM6010_REQ07_R51_VBI_DATA_TYPE_LINE21, 0x66); - tm6000_set_reg(dev, - TM6010_REQ07_R52_VBI_DATA_TYPE_LINE22, 0x66); - tm6000_set_reg(dev, - TM6010_REQ07_R53_VBI_DATA_TYPE_LINE23, 0x00); - tm6000_set_reg(dev, - TM6010_REQ07_R54_VBI_DATA_TYPE_RLINES, 0x00); - tm6000_set_reg(dev, - TM6010_REQ07_R55_VBI_LOOP_FILTER_GAIN, 0x01); - tm6000_set_reg(dev, - TM6010_REQ07_R56_VBI_LOOP_FILTER_I_GAIN, 0x00); - tm6000_set_reg(dev, - TM6010_REQ07_R57_VBI_LOOP_FILTER_P_GAIN, 0x02); - tm6000_set_reg(dev, TM6010_REQ07_R58_VBI_CAPTION_DTO1, 0x35); - tm6000_set_reg(dev, TM6010_REQ07_R59_VBI_CAPTION_DTO0, 0xa0); - tm6000_set_reg(dev, TM6010_REQ07_R5A_VBI_TELETEXT_DTO1, 0x11); - tm6000_set_reg(dev, TM6010_REQ07_R5B_VBI_TELETEXT_DTO0, 0x4c); - tm6000_set_reg(dev, TM6010_REQ07_R40_TELETEXT_VBI_CODE0, 0x01); - tm6000_set_reg(dev, TM6010_REQ07_R3F_RESET, 0x00); - } -} - -int tm6000_init_analog_mode(struct tm6000_core *dev) -{ - struct v4l2_frequency f; - - if (dev->dev_type == TM6010) { - u8 active = TM6010_REQ07_RCC_ACTIVE_IF_AUDIO_ENABLE; - - if (!dev->radio) - active |= TM6010_REQ07_RCC_ACTIVE_IF_VIDEO_ENABLE; - - /* Enable video and audio */ - tm6000_set_reg_mask(dev, TM6010_REQ07_RCC_ACTIVE_IF, - active, 0x60); - /* Disable TS input */ - tm6000_set_reg_mask(dev, TM6010_REQ07_RC0_ACTIVE_VIDEO_SOURCE, - 0x00, 0x40); - } else { - /* Enables soft reset */ - tm6000_set_reg(dev, TM6010_REQ07_R3F_RESET, 0x01); - - if (dev->scaler) - /* Disable Hfilter and Enable TS Drop err */ - tm6000_set_reg(dev, TM6010_REQ07_RC0_ACTIVE_VIDEO_SOURCE, 0x20); - else /* Enable Hfilter and disable TS Drop err */ - tm6000_set_reg(dev, TM6010_REQ07_RC0_ACTIVE_VIDEO_SOURCE, 0x80); - - tm6000_set_reg(dev, TM6010_REQ07_RC3_HSTART1, 0x88); - tm6000_set_reg(dev, TM6000_REQ07_RDA_CLK_SEL, 0x23); - tm6000_set_reg(dev, TM6010_REQ07_RD1_ADDR_FOR_REQ1, 0xc0); - tm6000_set_reg(dev, TM6010_REQ07_RD2_ADDR_FOR_REQ2, 0xd8); - tm6000_set_reg(dev, TM6010_REQ07_RD6_ENDP_REQ1_REQ2, 0x06); - tm6000_set_reg(dev, TM6000_REQ07_RDF_PWDOWN_ACLK, 0x1f); - - /* AP Software reset */ - tm6000_set_reg(dev, TM6010_REQ07_RFF_SOFT_RESET, 0x08); - tm6000_set_reg(dev, TM6010_REQ07_RFF_SOFT_RESET, 0x00); - - tm6000_set_fourcc_format(dev); - - /* Disables soft reset */ - tm6000_set_reg(dev, TM6010_REQ07_R3F_RESET, 0x00); - } - msleep(20); - - /* Tuner firmware can now be loaded */ - - /* - * FIXME: This is a hack! xc3028 "sleeps" when no channel is detected - * for more than a few seconds. Not sure why, as this behavior does - * not happen on other devices with xc3028. So, I suspect that it - * is yet another bug at tm6000. After start sleeping, decoding - * doesn't start automatically. Instead, it requires some - * I2C commands to wake it up. As we want to have image at the - * beginning, we needed to add this hack. The better would be to - * discover some way to make tm6000 to wake up without this hack. - */ - f.frequency = dev->freq; - v4l2_device_call_all(&dev->v4l2_dev, 0, tuner, s_frequency, &f); - - msleep(100); - tm6000_set_standard(dev); - tm6000_set_vbi(dev); - tm6000_set_audio_bitrate(dev, 48000); - - /* switch dvb led off */ - if (dev->gpio.dvb_led) { - tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, - dev->gpio.dvb_led, 0x01); - } - - return 0; -} - -int tm6000_init_digital_mode(struct tm6000_core *dev) -{ - if (dev->dev_type == TM6010) { - /* Disable video and audio */ - tm6000_set_reg_mask(dev, TM6010_REQ07_RCC_ACTIVE_IF, - 0x00, 0x60); - /* Enable TS input */ - tm6000_set_reg_mask(dev, TM6010_REQ07_RC0_ACTIVE_VIDEO_SOURCE, - 0x40, 0x40); - /* all power down, but not the digital data port */ - tm6000_set_reg(dev, TM6010_REQ07_RFE_POWER_DOWN, 0x28); - tm6000_set_reg(dev, TM6010_REQ08_RE2_POWER_DOWN_CTRL1, 0xfc); - tm6000_set_reg(dev, TM6010_REQ08_RE6_POWER_DOWN_CTRL2, 0xff); - } else { - tm6000_set_reg(dev, TM6010_REQ07_RFF_SOFT_RESET, 0x08); - tm6000_set_reg(dev, TM6010_REQ07_RFF_SOFT_RESET, 0x00); - tm6000_set_reg(dev, TM6010_REQ07_R3F_RESET, 0x01); - tm6000_set_reg(dev, TM6000_REQ07_RDF_PWDOWN_ACLK, 0x08); - tm6000_set_reg(dev, TM6000_REQ07_RE2_VADC_STATUS_CTL, 0x0c); - tm6000_set_reg(dev, TM6000_REQ07_RE8_VADC_PWDOWN_CTL, 0xff); - tm6000_set_reg(dev, TM6000_REQ07_REB_VADC_AADC_MODE, 0xd8); - tm6000_set_reg(dev, TM6010_REQ07_RC0_ACTIVE_VIDEO_SOURCE, 0x40); - tm6000_set_reg(dev, TM6010_REQ07_RC1_TRESHOLD, 0xd0); - tm6000_set_reg(dev, TM6010_REQ07_RC3_HSTART1, 0x09); - tm6000_set_reg(dev, TM6000_REQ07_RDA_CLK_SEL, 0x37); - tm6000_set_reg(dev, TM6010_REQ07_RD1_ADDR_FOR_REQ1, 0xd8); - tm6000_set_reg(dev, TM6010_REQ07_RD2_ADDR_FOR_REQ2, 0xc0); - tm6000_set_reg(dev, TM6010_REQ07_RD6_ENDP_REQ1_REQ2, 0x60); - - tm6000_set_reg(dev, TM6000_REQ07_RE2_VADC_STATUS_CTL, 0x0c); - tm6000_set_reg(dev, TM6000_REQ07_RE8_VADC_PWDOWN_CTL, 0xff); - tm6000_set_reg(dev, TM6000_REQ07_REB_VADC_AADC_MODE, 0x08); - msleep(50); - - tm6000_set_reg(dev, REQ_04_EN_DISABLE_MCU_INT, 0x0020, 0x00); - msleep(50); - tm6000_set_reg(dev, REQ_04_EN_DISABLE_MCU_INT, 0x0020, 0x01); - msleep(50); - tm6000_set_reg(dev, REQ_04_EN_DISABLE_MCU_INT, 0x0020, 0x00); - msleep(100); - } - - /* switch dvb led on */ - if (dev->gpio.dvb_led) { - tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, - dev->gpio.dvb_led, 0x00); - } - - return 0; -} -EXPORT_SYMBOL(tm6000_init_digital_mode); - -struct reg_init { - u8 req; - u8 reg; - u8 val; -}; - -/* The meaning of those initializations are unknown */ -static struct reg_init tm6000_init_tab[] = { - /* REG VALUE */ - { TM6000_REQ07_RDF_PWDOWN_ACLK, 0x1f }, - { TM6010_REQ07_RFF_SOFT_RESET, 0x08 }, - { TM6010_REQ07_RFF_SOFT_RESET, 0x00 }, - { TM6010_REQ07_RD5_POWERSAVE, 0x4f }, - { TM6000_REQ07_RDA_CLK_SEL, 0x23 }, - { TM6000_REQ07_RDB_OUT_SEL, 0x08 }, - { TM6000_REQ07_RE2_VADC_STATUS_CTL, 0x00 }, - { TM6000_REQ07_RE3_VADC_INP_LPF_SEL1, 0x10 }, - { TM6000_REQ07_RE5_VADC_INP_LPF_SEL2, 0x00 }, - { TM6000_REQ07_RE8_VADC_PWDOWN_CTL, 0x00 }, - { TM6000_REQ07_REB_VADC_AADC_MODE, 0x64 }, /* 48000 bits/sample, external input */ - { TM6000_REQ07_REE_VADC_CTRL_SEL_CONTROL, 0xc2 }, - - { TM6010_REQ07_R3F_RESET, 0x01 }, /* Start of soft reset */ - { TM6010_REQ07_R00_VIDEO_CONTROL0, 0x00 }, - { TM6010_REQ07_R01_VIDEO_CONTROL1, 0x07 }, - { TM6010_REQ07_R02_VIDEO_CONTROL2, 0x5f }, - { TM6010_REQ07_R03_YC_SEP_CONTROL, 0x00 }, - { TM6010_REQ07_R05_NOISE_THRESHOLD, 0x64 }, - { TM6010_REQ07_R07_OUTPUT_CONTROL, 0x01 }, - { TM6010_REQ07_R08_LUMA_CONTRAST_ADJ, 0x82 }, - { TM6010_REQ07_R09_LUMA_BRIGHTNESS_ADJ, 0x36 }, - { TM6010_REQ07_R0A_CHROMA_SATURATION_ADJ, 0x50 }, - { TM6010_REQ07_R0C_CHROMA_AGC_CONTROL, 0x6a }, - { TM6010_REQ07_R11_AGC_PEAK_CONTROL, 0xc9 }, - { TM6010_REQ07_R12_AGC_GATE_STARTH, 0x07 }, - { TM6010_REQ07_R13_AGC_GATE_STARTL, 0x3b }, - { TM6010_REQ07_R14_AGC_GATE_WIDTH, 0x47 }, - { TM6010_REQ07_R15_AGC_BP_DELAY, 0x6f }, - { TM6010_REQ07_R17_HLOOP_MAXSTATE, 0xcd }, - { TM6010_REQ07_R18_CHROMA_DTO_INCREMENT3, 0x1e }, - { TM6010_REQ07_R19_CHROMA_DTO_INCREMENT2, 0x8b }, - { TM6010_REQ07_R1A_CHROMA_DTO_INCREMENT1, 0xa2 }, - { TM6010_REQ07_R1B_CHROMA_DTO_INCREMENT0, 0xe9 }, - { TM6010_REQ07_R1C_HSYNC_DTO_INCREMENT3, 0x1c }, - { TM6010_REQ07_R1D_HSYNC_DTO_INCREMENT2, 0xcc }, - { TM6010_REQ07_R1E_HSYNC_DTO_INCREMENT1, 0xcc }, - { TM6010_REQ07_R1F_HSYNC_DTO_INCREMENT0, 0xcd }, - { TM6010_REQ07_R20_HSYNC_RISING_EDGE_TIME, 0x3c }, - { TM6010_REQ07_R21_HSYNC_PHASE_OFFSET, 0x3c }, - { TM6010_REQ07_R2D_CHROMA_BURST_END, 0x48 }, - { TM6010_REQ07_R2E_ACTIVE_VIDEO_HSTART, 0x88 }, - { TM6010_REQ07_R30_ACTIVE_VIDEO_VSTART, 0x22 }, - { TM6010_REQ07_R31_ACTIVE_VIDEO_VHIGHT, 0x61 }, - { TM6010_REQ07_R32_VSYNC_HLOCK_MIN, 0x74 }, - { TM6010_REQ07_R33_VSYNC_HLOCK_MAX, 0x1c }, - { TM6010_REQ07_R34_VSYNC_AGC_MIN, 0x74 }, - { TM6010_REQ07_R35_VSYNC_AGC_MAX, 0x1c }, - { TM6010_REQ07_R36_VSYNC_VBI_MIN, 0x7a }, - { TM6010_REQ07_R37_VSYNC_VBI_MAX, 0x26 }, - { TM6010_REQ07_R38_VSYNC_THRESHOLD, 0x40 }, - { TM6010_REQ07_R39_VSYNC_TIME_CONSTANT, 0x0a }, - { TM6010_REQ07_R42_VBI_DATA_HIGH_LEVEL, 0x55 }, - { TM6010_REQ07_R51_VBI_DATA_TYPE_LINE21, 0x11 }, - { TM6010_REQ07_R55_VBI_LOOP_FILTER_GAIN, 0x01 }, - { TM6010_REQ07_R57_VBI_LOOP_FILTER_P_GAIN, 0x02 }, - { TM6010_REQ07_R58_VBI_CAPTION_DTO1, 0x35 }, - { TM6010_REQ07_R59_VBI_CAPTION_DTO0, 0xa0 }, - { TM6010_REQ07_R80_COMB_FILTER_TRESHOLD, 0x15 }, - { TM6010_REQ07_R82_COMB_FILTER_CONFIG, 0x42 }, - { TM6010_REQ07_RC1_TRESHOLD, 0xd0 }, - { TM6010_REQ07_RC3_HSTART1, 0x88 }, - { TM6010_REQ07_R3F_RESET, 0x00 }, /* End of the soft reset */ - { TM6010_REQ05_R18_IMASK7, 0x00 }, -}; - -static struct reg_init tm6010_init_tab[] = { - { TM6010_REQ07_RC0_ACTIVE_VIDEO_SOURCE, 0x00 }, - { TM6010_REQ07_RC4_HSTART0, 0xa0 }, - { TM6010_REQ07_RC6_HEND0, 0x40 }, - { TM6010_REQ07_RCA_VEND0, 0x31 }, - { TM6010_REQ07_RCC_ACTIVE_IF, 0xe1 }, - { TM6010_REQ07_RE0_DVIDEO_SOURCE, 0x03 }, - { TM6010_REQ07_RFE_POWER_DOWN, 0x7f }, - - { TM6010_REQ08_RE2_POWER_DOWN_CTRL1, 0xf0 }, - { TM6010_REQ08_RE3_ADC_IN1_SEL, 0xf4 }, - { TM6010_REQ08_RE4_ADC_IN2_SEL, 0xf8 }, - { TM6010_REQ08_RE6_POWER_DOWN_CTRL2, 0x00 }, - { TM6010_REQ08_REA_BUFF_DRV_CTRL, 0xf2 }, - { TM6010_REQ08_REB_SIF_GAIN_CTRL, 0xf0 }, - { TM6010_REQ08_REC_REVERSE_YC_CTRL, 0xc2 }, - { TM6010_REQ08_RF0_DAUDIO_INPUT_CONFIG, 0x60 }, - { TM6010_REQ08_RF1_AADC_POWER_DOWN, 0xfc }, - - { TM6010_REQ07_R3F_RESET, 0x01 }, - { TM6010_REQ07_R00_VIDEO_CONTROL0, 0x00 }, - { TM6010_REQ07_R01_VIDEO_CONTROL1, 0x07 }, - { TM6010_REQ07_R02_VIDEO_CONTROL2, 0x5f }, - { TM6010_REQ07_R03_YC_SEP_CONTROL, 0x00 }, - { TM6010_REQ07_R05_NOISE_THRESHOLD, 0x64 }, - { TM6010_REQ07_R07_OUTPUT_CONTROL, 0x01 }, - { TM6010_REQ07_R08_LUMA_CONTRAST_ADJ, 0x82 }, - { TM6010_REQ07_R09_LUMA_BRIGHTNESS_ADJ, 0x36 }, - { TM6010_REQ07_R0A_CHROMA_SATURATION_ADJ, 0x50 }, - { TM6010_REQ07_R0C_CHROMA_AGC_CONTROL, 0x6a }, - { TM6010_REQ07_R11_AGC_PEAK_CONTROL, 0xc9 }, - { TM6010_REQ07_R12_AGC_GATE_STARTH, 0x07 }, - { TM6010_REQ07_R13_AGC_GATE_STARTL, 0x3b }, - { TM6010_REQ07_R14_AGC_GATE_WIDTH, 0x47 }, - { TM6010_REQ07_R15_AGC_BP_DELAY, 0x6f }, - { TM6010_REQ07_R17_HLOOP_MAXSTATE, 0xcd }, - { TM6010_REQ07_R18_CHROMA_DTO_INCREMENT3, 0x1e }, - { TM6010_REQ07_R19_CHROMA_DTO_INCREMENT2, 0x8b }, - { TM6010_REQ07_R1A_CHROMA_DTO_INCREMENT1, 0xa2 }, - { TM6010_REQ07_R1B_CHROMA_DTO_INCREMENT0, 0xe9 }, - { TM6010_REQ07_R1C_HSYNC_DTO_INCREMENT3, 0x1c }, - { TM6010_REQ07_R1D_HSYNC_DTO_INCREMENT2, 0xcc }, - { TM6010_REQ07_R1E_HSYNC_DTO_INCREMENT1, 0xcc }, - { TM6010_REQ07_R1F_HSYNC_DTO_INCREMENT0, 0xcd }, - { TM6010_REQ07_R20_HSYNC_RISING_EDGE_TIME, 0x3c }, - { TM6010_REQ07_R21_HSYNC_PHASE_OFFSET, 0x3c }, - { TM6010_REQ07_R2D_CHROMA_BURST_END, 0x48 }, - { TM6010_REQ07_R2E_ACTIVE_VIDEO_HSTART, 0x88 }, - { TM6010_REQ07_R30_ACTIVE_VIDEO_VSTART, 0x22 }, - { TM6010_REQ07_R31_ACTIVE_VIDEO_VHIGHT, 0x61 }, - { TM6010_REQ07_R32_VSYNC_HLOCK_MIN, 0x74 }, - { TM6010_REQ07_R33_VSYNC_HLOCK_MAX, 0x1c }, - { TM6010_REQ07_R34_VSYNC_AGC_MIN, 0x74 }, - { TM6010_REQ07_R35_VSYNC_AGC_MAX, 0x1c }, - { TM6010_REQ07_R36_VSYNC_VBI_MIN, 0x7a }, - { TM6010_REQ07_R37_VSYNC_VBI_MAX, 0x26 }, - { TM6010_REQ07_R38_VSYNC_THRESHOLD, 0x40 }, - { TM6010_REQ07_R39_VSYNC_TIME_CONSTANT, 0x0a }, - { TM6010_REQ07_R42_VBI_DATA_HIGH_LEVEL, 0x55 }, - { TM6010_REQ07_R51_VBI_DATA_TYPE_LINE21, 0x11 }, - { TM6010_REQ07_R55_VBI_LOOP_FILTER_GAIN, 0x01 }, - { TM6010_REQ07_R57_VBI_LOOP_FILTER_P_GAIN, 0x02 }, - { TM6010_REQ07_R58_VBI_CAPTION_DTO1, 0x35 }, - { TM6010_REQ07_R59_VBI_CAPTION_DTO0, 0xa0 }, - { TM6010_REQ07_R80_COMB_FILTER_TRESHOLD, 0x15 }, - { TM6010_REQ07_R82_COMB_FILTER_CONFIG, 0x42 }, - { TM6010_REQ07_RC1_TRESHOLD, 0xd0 }, - { TM6010_REQ07_RC3_HSTART1, 0x88 }, - { TM6010_REQ07_R3F_RESET, 0x00 }, - - { TM6010_REQ05_R18_IMASK7, 0x00 }, - - { TM6010_REQ07_RDC_IR_LEADER1, 0xaa }, - { TM6010_REQ07_RDD_IR_LEADER0, 0x30 }, - { TM6010_REQ07_RDE_IR_PULSE_CNT1, 0x20 }, - { TM6010_REQ07_RDF_IR_PULSE_CNT0, 0xd0 }, - { REQ_04_EN_DISABLE_MCU_INT, 0x02, 0x00 }, - { TM6010_REQ07_RD8_IR, 0x0f }, - - /* set remote wakeup key:any key wakeup */ - { TM6010_REQ07_RE5_REMOTE_WAKEUP, 0xfe }, - { TM6010_REQ07_RDA_IR_WAKEUP_SEL, 0xff }, -}; - -int tm6000_init(struct tm6000_core *dev) -{ - int board, rc = 0, i, size; - struct reg_init *tab; - - /* Check board revision */ - board = tm6000_get_reg32(dev, REQ_40_GET_VERSION, 0, 0); - if (board >= 0) { - switch (board & 0xff) { - case 0xf3: - printk(KERN_INFO "Found tm6000\n"); - if (dev->dev_type != TM6000) - dev->dev_type = TM6000; - break; - case 0xf4: - printk(KERN_INFO "Found tm6010\n"); - if (dev->dev_type != TM6010) - dev->dev_type = TM6010; - break; - default: - printk(KERN_INFO "Unknown board version = 0x%08x\n", board); - } - } else - printk(KERN_ERR "Error %i while retrieving board version\n", board); - - if (dev->dev_type == TM6010) { - tab = tm6010_init_tab; - size = ARRAY_SIZE(tm6010_init_tab); - } else { - tab = tm6000_init_tab; - size = ARRAY_SIZE(tm6000_init_tab); - } - - /* Load board's initialization table */ - for (i = 0; i < size; i++) { - rc = tm6000_set_reg(dev, tab[i].req, tab[i].reg, tab[i].val); - if (rc < 0) { - printk(KERN_ERR "Error %i while setting req %d, reg %d to value %d\n", - rc, - tab[i].req, tab[i].reg, tab[i].val); - return rc; - } - } - - msleep(5); /* Just to be conservative */ - - rc = tm6000_cards_setup(dev); - - return rc; -} - - -int tm6000_set_audio_bitrate(struct tm6000_core *dev, int bitrate) -{ - int val = 0; - u8 areg_f0 = 0x60; /* ADC MCLK = 250 Fs */ - u8 areg_0a = 0x91; /* SIF 48KHz */ - - switch (bitrate) { - case 48000: - areg_f0 = 0x60; /* ADC MCLK = 250 Fs */ - areg_0a = 0x91; /* SIF 48KHz */ - dev->audio_bitrate = bitrate; - break; - case 32000: - areg_f0 = 0x00; /* ADC MCLK = 375 Fs */ - areg_0a = 0x90; /* SIF 32KHz */ - dev->audio_bitrate = bitrate; - break; - default: - return -EINVAL; - } - - - /* enable I2S, if we use sif or external I2S device */ - if (dev->dev_type == TM6010) { - val = tm6000_set_reg(dev, TM6010_REQ08_R0A_A_I2S_MOD, areg_0a); - if (val < 0) - return val; - - val = tm6000_set_reg_mask(dev, TM6010_REQ08_RF0_DAUDIO_INPUT_CONFIG, - areg_f0, 0xf0); - if (val < 0) - return val; - } else { - val = tm6000_set_reg_mask(dev, TM6000_REQ07_REB_VADC_AADC_MODE, - areg_f0, 0xf0); - if (val < 0) - return val; - } - return 0; -} -EXPORT_SYMBOL_GPL(tm6000_set_audio_bitrate); - -int tm6000_set_audio_rinput(struct tm6000_core *dev) -{ - if (dev->dev_type == TM6010) { - /* Audio crossbar setting, default SIF1 */ - u8 areg_f0; - u8 areg_07 = 0x10; - - switch (dev->rinput.amux) { - case TM6000_AMUX_SIF1: - case TM6000_AMUX_SIF2: - areg_f0 = 0x03; - areg_07 = 0x30; - break; - case TM6000_AMUX_ADC1: - areg_f0 = 0x00; - break; - case TM6000_AMUX_ADC2: - areg_f0 = 0x08; - break; - case TM6000_AMUX_I2S: - areg_f0 = 0x04; - break; - default: - printk(KERN_INFO "%s: audio input doesn't support\n", - dev->name); - return 0; - break; - } - /* Set audio input crossbar */ - tm6000_set_reg_mask(dev, TM6010_REQ08_RF0_DAUDIO_INPUT_CONFIG, - areg_f0, 0x0f); - /* Mux overflow workaround */ - tm6000_set_reg_mask(dev, TM6010_REQ07_R07_OUTPUT_CONTROL, - areg_07, 0xf0); - } else { - u8 areg_eb; - /* Audio setting, default LINE1 */ - switch (dev->rinput.amux) { - case TM6000_AMUX_ADC1: - areg_eb = 0x00; - break; - case TM6000_AMUX_ADC2: - areg_eb = 0x04; - break; - default: - printk(KERN_INFO "%s: audio input doesn't support\n", - dev->name); - return 0; - break; - } - /* Set audio input */ - tm6000_set_reg_mask(dev, TM6000_REQ07_REB_VADC_AADC_MODE, - areg_eb, 0x0f); - } - return 0; -} - -static void tm6010_set_mute_sif(struct tm6000_core *dev, u8 mute) -{ - u8 mute_reg = 0; - - if (mute) - mute_reg = 0x08; - - tm6000_set_reg_mask(dev, TM6010_REQ08_R0A_A_I2S_MOD, mute_reg, 0x08); -} - -static void tm6010_set_mute_adc(struct tm6000_core *dev, u8 mute) -{ - u8 mute_reg = 0; - - if (mute) - mute_reg = 0x20; - - if (dev->dev_type == TM6010) { - tm6000_set_reg_mask(dev, TM6010_REQ08_RF2_LEFT_CHANNEL_VOL, - mute_reg, 0x20); - tm6000_set_reg_mask(dev, TM6010_REQ08_RF3_RIGHT_CHANNEL_VOL, - mute_reg, 0x20); - } else { - tm6000_set_reg_mask(dev, TM6000_REQ07_REC_VADC_AADC_LVOL, - mute_reg, 0x20); - tm6000_set_reg_mask(dev, TM6000_REQ07_RED_VADC_AADC_RVOL, - mute_reg, 0x20); - } -} - -int tm6000_tvaudio_set_mute(struct tm6000_core *dev, u8 mute) -{ - enum tm6000_mux mux; - - if (dev->radio) - mux = dev->rinput.amux; - else - mux = dev->vinput[dev->input].amux; - - switch (mux) { - case TM6000_AMUX_SIF1: - case TM6000_AMUX_SIF2: - if (dev->dev_type == TM6010) - tm6010_set_mute_sif(dev, mute); - else { - printk(KERN_INFO "ERROR: TM5600 and TM6000 don't has SIF audio inputs. Please check the %s configuration.\n", - dev->name); - return -EINVAL; - } - break; - case TM6000_AMUX_ADC1: - case TM6000_AMUX_ADC2: - tm6010_set_mute_adc(dev, mute); - break; - default: - return -EINVAL; - break; - } - return 0; -} - -static void tm6010_set_volume_sif(struct tm6000_core *dev, int vol) -{ - u8 vol_reg; - - vol_reg = vol & 0x0F; - - if (vol < 0) - vol_reg |= 0x40; - - tm6000_set_reg(dev, TM6010_REQ08_R07_A_LEFT_VOL, vol_reg); - tm6000_set_reg(dev, TM6010_REQ08_R08_A_RIGHT_VOL, vol_reg); -} - -static void tm6010_set_volume_adc(struct tm6000_core *dev, int vol) -{ - u8 vol_reg; - - vol_reg = (vol + 0x10) & 0x1f; - - if (dev->dev_type == TM6010) { - tm6000_set_reg(dev, TM6010_REQ08_RF2_LEFT_CHANNEL_VOL, vol_reg); - tm6000_set_reg(dev, TM6010_REQ08_RF3_RIGHT_CHANNEL_VOL, vol_reg); - } else { - tm6000_set_reg(dev, TM6000_REQ07_REC_VADC_AADC_LVOL, vol_reg); - tm6000_set_reg(dev, TM6000_REQ07_RED_VADC_AADC_RVOL, vol_reg); - } -} - -void tm6000_set_volume(struct tm6000_core *dev, int vol) -{ - enum tm6000_mux mux; - - if (dev->radio) { - mux = dev->rinput.amux; - vol += 8; /* Offset to 0 dB */ - } else - mux = dev->vinput[dev->input].amux; - - switch (mux) { - case TM6000_AMUX_SIF1: - case TM6000_AMUX_SIF2: - if (dev->dev_type == TM6010) - tm6010_set_volume_sif(dev, vol); - else - printk(KERN_INFO "ERROR: TM5600 and TM6000 don't has SIF audio inputs. Please check the %s configuration.\n", - dev->name); - break; - case TM6000_AMUX_ADC1: - case TM6000_AMUX_ADC2: - tm6010_set_volume_adc(dev, vol); - break; - default: - break; - } -} - -static LIST_HEAD(tm6000_devlist); -static DEFINE_MUTEX(tm6000_devlist_mutex); - -/* - * tm6000_realease_resource() - */ - -void tm6000_remove_from_devlist(struct tm6000_core *dev) -{ - mutex_lock(&tm6000_devlist_mutex); - list_del(&dev->devlist); - mutex_unlock(&tm6000_devlist_mutex); -}; - -void tm6000_add_into_devlist(struct tm6000_core *dev) -{ - mutex_lock(&tm6000_devlist_mutex); - list_add_tail(&dev->devlist, &tm6000_devlist); - mutex_unlock(&tm6000_devlist_mutex); -}; - -/* - * Extension interface - */ - -static LIST_HEAD(tm6000_extension_devlist); - -int tm6000_call_fillbuf(struct tm6000_core *dev, enum tm6000_ops_type type, - char *buf, int size) -{ - struct tm6000_ops *ops = NULL; - - /* FIXME: tm6000_extension_devlist_lock should be a spinlock */ - - list_for_each_entry(ops, &tm6000_extension_devlist, next) { - if (ops->fillbuf && ops->type == type) - ops->fillbuf(dev, buf, size); - } - - return 0; -} - -int tm6000_register_extension(struct tm6000_ops *ops) -{ - struct tm6000_core *dev = NULL; - - mutex_lock(&tm6000_devlist_mutex); - list_add_tail(&ops->next, &tm6000_extension_devlist); - list_for_each_entry(dev, &tm6000_devlist, devlist) { - ops->init(dev); - printk(KERN_INFO "%s: Initialized (%s) extension\n", - dev->name, ops->name); - } - mutex_unlock(&tm6000_devlist_mutex); - return 0; -} -EXPORT_SYMBOL(tm6000_register_extension); - -void tm6000_unregister_extension(struct tm6000_ops *ops) -{ - struct tm6000_core *dev = NULL; - - mutex_lock(&tm6000_devlist_mutex); - list_for_each_entry(dev, &tm6000_devlist, devlist) - ops->fini(dev); - - printk(KERN_INFO "tm6000: Remove (%s) extension\n", ops->name); - list_del(&ops->next); - mutex_unlock(&tm6000_devlist_mutex); -} -EXPORT_SYMBOL(tm6000_unregister_extension); - -void tm6000_init_extension(struct tm6000_core *dev) -{ - struct tm6000_ops *ops = NULL; - - mutex_lock(&tm6000_devlist_mutex); - list_for_each_entry(ops, &tm6000_extension_devlist, next) { - if (ops->init) - ops->init(dev); - } - mutex_unlock(&tm6000_devlist_mutex); -} - -void tm6000_close_extension(struct tm6000_core *dev) -{ - struct tm6000_ops *ops = NULL; - - mutex_lock(&tm6000_devlist_mutex); - list_for_each_entry(ops, &tm6000_extension_devlist, next) { - if (ops->fini) - ops->fini(dev); - } - mutex_unlock(&tm6000_devlist_mutex); -} diff --git a/drivers/staging/media/deprecated/tm6000/tm6000-dvb.c b/drivers/staging/media/deprecated/tm6000/tm6000-dvb.c deleted file mode 100644 index ee04973cbf93..000000000000 --- a/drivers/staging/media/deprecated/tm6000/tm6000-dvb.c +++ /dev/null @@ -1,454 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * tm6000-dvb.c - dvb-t support for TM5600/TM6000/TM6010 USB video capture devices - * - * Copyright (C) 2007 Michel Ludwig - */ - -#include -#include -#include - -#include "tm6000.h" -#include "tm6000-regs.h" - -#include "zl10353.h" - -#include - -#include "xc2028.h" -#include "xc5000.h" - -MODULE_DESCRIPTION("DVB driver extension module for tm5600/6000/6010 based TV cards"); -MODULE_AUTHOR("Mauro Carvalho Chehab"); -MODULE_LICENSE("GPL"); - -static int debug; - -module_param(debug, int, 0644); -MODULE_PARM_DESC(debug, "enable debug message"); - -static inline void print_err_status(struct tm6000_core *dev, - int packet, int status) -{ - char *errmsg = "Unknown"; - - switch (status) { - case -ENOENT: - errmsg = "unlinked synchronously"; - break; - case -ECONNRESET: - errmsg = "unlinked asynchronously"; - break; - case -ENOSR: - errmsg = "Buffer error (overrun)"; - break; - case -EPIPE: - errmsg = "Stalled (device not responding)"; - break; - case -EOVERFLOW: - errmsg = "Babble (bad cable?)"; - break; - case -EPROTO: - errmsg = "Bit-stuff error (bad cable?)"; - break; - case -EILSEQ: - errmsg = "CRC/Timeout (could be anything)"; - break; - case -ETIME: - errmsg = "Device does not respond"; - break; - } - if (packet < 0) { - dprintk(dev, 1, "URB status %d [%s].\n", - status, errmsg); - } else { - dprintk(dev, 1, "URB packet %d, status %d [%s].\n", - packet, status, errmsg); - } -} - -static void tm6000_urb_received(struct urb *urb) -{ - int ret; - struct tm6000_core *dev = urb->context; - - switch (urb->status) { - case 0: - case -ETIMEDOUT: - break; - case -ENOENT: - case -ECONNRESET: - case -ESHUTDOWN: - return; - default: - print_err_status(dev, 0, urb->status); - } - - if (urb->actual_length > 0) - dvb_dmx_swfilter(&dev->dvb->demux, urb->transfer_buffer, - urb->actual_length); - - if (dev->dvb->streams > 0) { - ret = usb_submit_urb(urb, GFP_ATOMIC); - if (ret < 0) { - printk(KERN_ERR "tm6000: error %s\n", __func__); - kfree(urb->transfer_buffer); - usb_free_urb(urb); - dev->dvb->bulk_urb = NULL; - } - } -} - -static int tm6000_start_stream(struct tm6000_core *dev) -{ - int ret; - unsigned int pipe, size; - struct tm6000_dvb *dvb = dev->dvb; - - printk(KERN_INFO "tm6000: got start stream request %s\n", __func__); - - if (dev->mode != TM6000_MODE_DIGITAL) { - tm6000_init_digital_mode(dev); - dev->mode = TM6000_MODE_DIGITAL; - } - - dvb->bulk_urb = usb_alloc_urb(0, GFP_KERNEL); - if (!dvb->bulk_urb) - return -ENOMEM; - - pipe = usb_rcvbulkpipe(dev->udev, dev->bulk_in.endp->desc.bEndpointAddress - & USB_ENDPOINT_NUMBER_MASK); - - size = usb_maxpacket(dev->udev, pipe); - size = size * 15; /* 512 x 8 or 12 or 15 */ - - dvb->bulk_urb->transfer_buffer = kzalloc(size, GFP_KERNEL); - if (!dvb->bulk_urb->transfer_buffer) { - usb_free_urb(dvb->bulk_urb); - dvb->bulk_urb = NULL; - return -ENOMEM; - } - - usb_fill_bulk_urb(dvb->bulk_urb, dev->udev, pipe, - dvb->bulk_urb->transfer_buffer, - size, - tm6000_urb_received, dev); - - ret = usb_clear_halt(dev->udev, pipe); - if (ret < 0) { - printk(KERN_ERR "tm6000: error %i in %s during pipe reset\n", - ret, __func__); - - kfree(dvb->bulk_urb->transfer_buffer); - usb_free_urb(dvb->bulk_urb); - dvb->bulk_urb = NULL; - return ret; - } else - printk(KERN_ERR "tm6000: pipe reset\n"); - -/* mutex_lock(&tm6000_driver.open_close_mutex); */ - ret = usb_submit_urb(dvb->bulk_urb, GFP_ATOMIC); - -/* mutex_unlock(&tm6000_driver.open_close_mutex); */ - if (ret) { - printk(KERN_ERR "tm6000: submit of urb failed (error=%i)\n", - ret); - - kfree(dvb->bulk_urb->transfer_buffer); - usb_free_urb(dvb->bulk_urb); - dvb->bulk_urb = NULL; - return ret; - } - - return 0; -} - -static void tm6000_stop_stream(struct tm6000_core *dev) -{ - struct tm6000_dvb *dvb = dev->dvb; - - if (dvb->bulk_urb) { - printk(KERN_INFO "urb killing\n"); - usb_kill_urb(dvb->bulk_urb); - printk(KERN_INFO "urb buffer free\n"); - kfree(dvb->bulk_urb->transfer_buffer); - usb_free_urb(dvb->bulk_urb); - dvb->bulk_urb = NULL; - } -} - -static int tm6000_start_feed(struct dvb_demux_feed *feed) -{ - struct dvb_demux *demux = feed->demux; - struct tm6000_core *dev = demux->priv; - struct tm6000_dvb *dvb = dev->dvb; - printk(KERN_INFO "tm6000: got start feed request %s\n", __func__); - - mutex_lock(&dvb->mutex); - if (dvb->streams == 0) { - dvb->streams = 1; -/* mutex_init(&tm6000_dev->streming_mutex); */ - tm6000_start_stream(dev); - } else - ++(dvb->streams); - mutex_unlock(&dvb->mutex); - - return 0; -} - -static int tm6000_stop_feed(struct dvb_demux_feed *feed) -{ - struct dvb_demux *demux = feed->demux; - struct tm6000_core *dev = demux->priv; - struct tm6000_dvb *dvb = dev->dvb; - - printk(KERN_INFO "tm6000: got stop feed request %s\n", __func__); - - mutex_lock(&dvb->mutex); - - printk(KERN_INFO "stream %#x\n", dvb->streams); - --(dvb->streams); - if (dvb->streams == 0) { - printk(KERN_INFO "stop stream\n"); - tm6000_stop_stream(dev); -/* mutex_destroy(&tm6000_dev->streaming_mutex); */ - } - mutex_unlock(&dvb->mutex); -/* mutex_destroy(&tm6000_dev->streaming_mutex); */ - - return 0; -} - -static int tm6000_dvb_attach_frontend(struct tm6000_core *dev) -{ - struct tm6000_dvb *dvb = dev->dvb; - - if (dev->caps.has_zl10353) { - struct zl10353_config config = { - .demod_address = dev->demod_addr, - .no_tuner = 1, - .parallel_ts = 1, - .if2 = 45700, - .disable_i2c_gate_ctrl = 1, - }; - - dvb->frontend = dvb_attach(zl10353_attach, &config, - &dev->i2c_adap); - } else { - printk(KERN_ERR "tm6000: no frontend defined for the device!\n"); - return -1; - } - - return (!dvb->frontend) ? -1 : 0; -} - -DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); - -static int register_dvb(struct tm6000_core *dev) -{ - int ret = -1; - struct tm6000_dvb *dvb = dev->dvb; - - mutex_init(&dvb->mutex); - - dvb->streams = 0; - - /* attach the frontend */ - ret = tm6000_dvb_attach_frontend(dev); - if (ret < 0) { - printk(KERN_ERR "tm6000: couldn't attach the frontend!\n"); - goto err; - } - - ret = dvb_register_adapter(&dvb->adapter, "Trident TVMaster 6000 DVB-T", - THIS_MODULE, &dev->udev->dev, adapter_nr); - if (ret < 0) { - pr_err("tm6000: couldn't register the adapter!\n"); - goto err; - } - - dvb->adapter.priv = dev; - - if (dvb->frontend) { - switch (dev->tuner_type) { - case TUNER_XC2028: { - struct xc2028_config cfg = { - .i2c_adap = &dev->i2c_adap, - .i2c_addr = dev->tuner_addr, - }; - - dvb->frontend->callback = tm6000_tuner_callback; - ret = dvb_register_frontend(&dvb->adapter, dvb->frontend); - if (ret < 0) { - printk(KERN_ERR - "tm6000: couldn't register frontend\n"); - goto adapter_err; - } - - if (!dvb_attach(xc2028_attach, dvb->frontend, &cfg)) { - printk(KERN_ERR "tm6000: couldn't register frontend (xc3028)\n"); - ret = -EINVAL; - goto frontend_err; - } - printk(KERN_INFO "tm6000: XC2028/3028 asked to be attached to frontend!\n"); - break; - } - case TUNER_XC5000: { - struct xc5000_config cfg = { - .i2c_address = dev->tuner_addr, - }; - - dvb->frontend->callback = tm6000_xc5000_callback; - ret = dvb_register_frontend(&dvb->adapter, dvb->frontend); - if (ret < 0) { - printk(KERN_ERR - "tm6000: couldn't register frontend\n"); - goto adapter_err; - } - - if (!dvb_attach(xc5000_attach, dvb->frontend, &dev->i2c_adap, &cfg)) { - printk(KERN_ERR "tm6000: couldn't register frontend (xc5000)\n"); - ret = -EINVAL; - goto frontend_err; - } - printk(KERN_INFO "tm6000: XC5000 asked to be attached to frontend!\n"); - break; - } - } - } else - printk(KERN_ERR "tm6000: no frontend found\n"); - - dvb->demux.dmx.capabilities = DMX_TS_FILTERING | DMX_SECTION_FILTERING - | DMX_MEMORY_BASED_FILTERING; - dvb->demux.priv = dev; - dvb->demux.filternum = 8; - dvb->demux.feednum = 8; - dvb->demux.start_feed = tm6000_start_feed; - dvb->demux.stop_feed = tm6000_stop_feed; - dvb->demux.write_to_decoder = NULL; - ret = dvb_dmx_init(&dvb->demux); - if (ret < 0) { - printk(KERN_ERR "tm6000: dvb_dmx_init failed (errno = %d)\n", ret); - goto frontend_err; - } - - dvb->dmxdev.filternum = dev->dvb->demux.filternum; - dvb->dmxdev.demux = &dev->dvb->demux.dmx; - dvb->dmxdev.capabilities = 0; - - ret = dvb_dmxdev_init(&dvb->dmxdev, &dvb->adapter); - if (ret < 0) { - printk(KERN_ERR "tm6000: dvb_dmxdev_init failed (errno = %d)\n", ret); - goto dvb_dmx_err; - } - - return 0; - -dvb_dmx_err: - dvb_dmx_release(&dvb->demux); -frontend_err: - if (dvb->frontend) { - dvb_unregister_frontend(dvb->frontend); - dvb_frontend_detach(dvb->frontend); - } -adapter_err: - dvb_unregister_adapter(&dvb->adapter); -err: - return ret; -} - -static void unregister_dvb(struct tm6000_core *dev) -{ - struct tm6000_dvb *dvb = dev->dvb; - - if (dvb->bulk_urb) { - struct urb *bulk_urb = dvb->bulk_urb; - - kfree(bulk_urb->transfer_buffer); - bulk_urb->transfer_buffer = NULL; - usb_unlink_urb(bulk_urb); - usb_free_urb(bulk_urb); - } - -/* mutex_lock(&tm6000_driver.open_close_mutex); */ - if (dvb->frontend) { - dvb_unregister_frontend(dvb->frontend); - dvb_frontend_detach(dvb->frontend); - } - - dvb_dmxdev_release(&dvb->dmxdev); - dvb_dmx_release(&dvb->demux); - dvb_unregister_adapter(&dvb->adapter); - mutex_destroy(&dvb->mutex); -/* mutex_unlock(&tm6000_driver.open_close_mutex); */ -} - -static int dvb_init(struct tm6000_core *dev) -{ - struct tm6000_dvb *dvb; - int rc; - - if (!dev) - return 0; - - if (!dev->caps.has_dvb) - return 0; - - if (dev->udev->speed == USB_SPEED_FULL) { - printk(KERN_INFO "This USB2.0 device cannot be run on a USB1.1 port. (it lacks a hardware PID filter)\n"); - return 0; - } - - dvb = kzalloc(sizeof(struct tm6000_dvb), GFP_KERNEL); - if (!dvb) - return -ENOMEM; - - dev->dvb = dvb; - - rc = register_dvb(dev); - if (rc < 0) { - kfree(dvb); - dev->dvb = NULL; - return 0; - } - - return 0; -} - -static int dvb_fini(struct tm6000_core *dev) -{ - if (!dev) - return 0; - - if (!dev->caps.has_dvb) - return 0; - - if (dev->dvb) { - unregister_dvb(dev); - kfree(dev->dvb); - dev->dvb = NULL; - } - - return 0; -} - -static struct tm6000_ops dvb_ops = { - .type = TM6000_DVB, - .name = "TM6000 dvb Extension", - .init = dvb_init, - .fini = dvb_fini, -}; - -static int __init tm6000_dvb_register(void) -{ - return tm6000_register_extension(&dvb_ops); -} - -static void __exit tm6000_dvb_unregister(void) -{ - tm6000_unregister_extension(&dvb_ops); -} - -module_init(tm6000_dvb_register); -module_exit(tm6000_dvb_unregister); diff --git a/drivers/staging/media/deprecated/tm6000/tm6000-i2c.c b/drivers/staging/media/deprecated/tm6000/tm6000-i2c.c deleted file mode 100644 index 7554b93b82e6..000000000000 --- a/drivers/staging/media/deprecated/tm6000/tm6000-i2c.c +++ /dev/null @@ -1,317 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -// tm6000-i2c.c - driver for TM5600/TM6000/TM6010 USB video capture devices -// -// Copyright (c) 2006-2007 Mauro Carvalho Chehab -// -// Copyright (c) 2007 Michel Ludwig -// - Fix SMBus Read Byte command - -#include -#include -#include -#include - -#include "tm6000.h" -#include "tm6000-regs.h" -#include -#include -#include "xc2028.h" - - -/* ----------------------------------------------------------- */ - -static unsigned int i2c_debug; -module_param(i2c_debug, int, 0644); -MODULE_PARM_DESC(i2c_debug, "enable debug messages [i2c]"); - -#define i2c_dprintk(lvl, fmt, args...) if (i2c_debug >= lvl) do { \ - printk(KERN_DEBUG "%s at %s: " fmt, \ - dev->name, __func__, ##args); } while (0) - -static int tm6000_i2c_send_regs(struct tm6000_core *dev, unsigned char addr, - __u8 reg, char *buf, int len) -{ - int rc; - unsigned int i2c_packet_limit = 16; - - if (dev->dev_type == TM6010) - i2c_packet_limit = 80; - - if (!buf) - return -1; - - if (len < 1 || len > i2c_packet_limit) { - printk(KERN_ERR "Incorrect length of i2c packet = %d, limit set to %d\n", - len, i2c_packet_limit); - return -1; - } - - /* capture mutex */ - rc = tm6000_read_write_usb(dev, USB_DIR_OUT | USB_TYPE_VENDOR | - USB_RECIP_DEVICE, REQ_16_SET_GET_I2C_WR1_RDN, - addr | reg << 8, 0, buf, len); - - if (rc < 0) { - /* release mutex */ - return rc; - } - - /* release mutex */ - return rc; -} - -/* Generic read - doesn't work fine with 16bit registers */ -static int tm6000_i2c_recv_regs(struct tm6000_core *dev, unsigned char addr, - __u8 reg, char *buf, int len) -{ - int rc; - u8 b[2]; - unsigned int i2c_packet_limit = 16; - - if (dev->dev_type == TM6010) - i2c_packet_limit = 64; - - if (!buf) - return -1; - - if (len < 1 || len > i2c_packet_limit) { - printk(KERN_ERR "Incorrect length of i2c packet = %d, limit set to %d\n", - len, i2c_packet_limit); - return -1; - } - - /* capture mutex */ - if ((dev->caps.has_zl10353) && (dev->demod_addr << 1 == addr) && (reg % 2 == 0)) { - /* - * Workaround an I2C bug when reading from zl10353 - */ - reg -= 1; - len += 1; - - rc = tm6000_read_write_usb(dev, USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE, - REQ_16_SET_GET_I2C_WR1_RDN, addr | reg << 8, 0, b, len); - - *buf = b[1]; - } else { - rc = tm6000_read_write_usb(dev, USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE, - REQ_16_SET_GET_I2C_WR1_RDN, addr | reg << 8, 0, buf, len); - } - - /* release mutex */ - return rc; -} - -/* - * read from a 16bit register - * for example xc2028, xc3028 or xc3028L - */ -static int tm6000_i2c_recv_regs16(struct tm6000_core *dev, unsigned char addr, - __u16 reg, char *buf, int len) -{ - int rc; - unsigned char ureg; - - if (!buf || len != 2) - return -1; - - /* capture mutex */ - if (dev->dev_type == TM6010) { - ureg = reg & 0xFF; - rc = tm6000_read_write_usb(dev, USB_DIR_OUT | USB_TYPE_VENDOR | - USB_RECIP_DEVICE, REQ_16_SET_GET_I2C_WR1_RDN, - addr | (reg & 0xFF00), 0, &ureg, 1); - - if (rc < 0) { - /* release mutex */ - return rc; - } - - rc = tm6000_read_write_usb(dev, USB_DIR_IN | USB_TYPE_VENDOR | - USB_RECIP_DEVICE, REQ_35_AFTEK_TUNER_READ, - reg, 0, buf, len); - } else { - rc = tm6000_read_write_usb(dev, USB_DIR_IN | USB_TYPE_VENDOR | - USB_RECIP_DEVICE, REQ_14_SET_GET_I2C_WR2_RDN, - addr, reg, buf, len); - } - - /* release mutex */ - return rc; -} - -static int tm6000_i2c_xfer(struct i2c_adapter *i2c_adap, - struct i2c_msg msgs[], int num) -{ - struct tm6000_core *dev = i2c_adap->algo_data; - int addr, rc, i, byte; - - for (i = 0; i < num; i++) { - addr = (msgs[i].addr << 1) & 0xff; - i2c_dprintk(2, "%s %s addr=0x%x len=%d:", - (msgs[i].flags & I2C_M_RD) ? "read" : "write", - i == num - 1 ? "stop" : "nonstop", addr, msgs[i].len); - if (msgs[i].flags & I2C_M_RD) { - /* read request without preceding register selection */ - /* - * The TM6000 only supports a read transaction - * immediately after a 1 or 2 byte write to select - * a register. We cannot fulfill this request. - */ - i2c_dprintk(2, " read without preceding write not supported"); - rc = -EOPNOTSUPP; - goto err; - } else if (i + 1 < num && msgs[i].len <= 2 && - (msgs[i + 1].flags & I2C_M_RD) && - msgs[i].addr == msgs[i + 1].addr) { - /* 1 or 2 byte write followed by a read */ - if (i2c_debug >= 2) - for (byte = 0; byte < msgs[i].len; byte++) - printk(KERN_CONT " %02x", msgs[i].buf[byte]); - i2c_dprintk(2, "; joined to read %s len=%d:", - i == num - 2 ? "stop" : "nonstop", - msgs[i + 1].len); - - if (msgs[i].len == 2) { - rc = tm6000_i2c_recv_regs16(dev, addr, - msgs[i].buf[0] << 8 | msgs[i].buf[1], - msgs[i + 1].buf, msgs[i + 1].len); - } else { - rc = tm6000_i2c_recv_regs(dev, addr, msgs[i].buf[0], - msgs[i + 1].buf, msgs[i + 1].len); - } - - i++; - - if (addr == dev->tuner_addr << 1) { - tm6000_set_reg(dev, REQ_50_SET_START, 0, 0); - tm6000_set_reg(dev, REQ_51_SET_STOP, 0, 0); - } - if (i2c_debug >= 2) - for (byte = 0; byte < msgs[i].len; byte++) - printk(KERN_CONT " %02x", msgs[i].buf[byte]); - } else { - /* write bytes */ - if (i2c_debug >= 2) - for (byte = 0; byte < msgs[i].len; byte++) - printk(KERN_CONT " %02x", msgs[i].buf[byte]); - rc = tm6000_i2c_send_regs(dev, addr, msgs[i].buf[0], - msgs[i].buf + 1, msgs[i].len - 1); - } - if (i2c_debug >= 2) - printk(KERN_CONT "\n"); - if (rc < 0) - goto err; - } - - return num; -err: - i2c_dprintk(2, " ERROR: %i\n", rc); - return rc; -} - -static int tm6000_i2c_eeprom(struct tm6000_core *dev) -{ - int i, rc; - unsigned char *p = dev->eedata; - unsigned char bytes[17]; - - dev->i2c_client.addr = 0xa0 >> 1; - dev->eedata_size = 0; - - bytes[16] = '\0'; - for (i = 0; i < sizeof(dev->eedata); ) { - *p = i; - rc = tm6000_i2c_recv_regs(dev, 0xa0, i, p, 1); - if (rc < 1) { - if (p == dev->eedata) - goto noeeprom; - else { - printk(KERN_WARNING - "%s: i2c eeprom read error (err=%d)\n", - dev->name, rc); - } - return -EINVAL; - } - dev->eedata_size++; - p++; - if (0 == (i % 16)) - printk(KERN_INFO "%s: i2c eeprom %02x:", dev->name, i); - printk(KERN_CONT " %02x", dev->eedata[i]); - if ((dev->eedata[i] >= ' ') && (dev->eedata[i] <= 'z')) - bytes[i%16] = dev->eedata[i]; - else - bytes[i%16] = '.'; - - i++; - - if (0 == (i % 16)) { - bytes[16] = '\0'; - printk(KERN_CONT " %s\n", bytes); - } - } - if (0 != (i%16)) { - bytes[i%16] = '\0'; - for (i %= 16; i < 16; i++) - printk(KERN_CONT " "); - printk(KERN_CONT " %s\n", bytes); - } - - return 0; - -noeeprom: - printk(KERN_INFO "%s: Huh, no eeprom present (err=%d)?\n", - dev->name, rc); - return -EINVAL; -} - -/* ----------------------------------------------------------- */ - -/* - * functionality() - */ -static u32 functionality(struct i2c_adapter *adap) -{ - return I2C_FUNC_SMBUS_EMUL; -} - -static const struct i2c_algorithm tm6000_algo = { - .master_xfer = tm6000_i2c_xfer, - .functionality = functionality, -}; - -/* ----------------------------------------------------------- */ - -/* - * tm6000_i2c_register() - * register i2c bus - */ -int tm6000_i2c_register(struct tm6000_core *dev) -{ - int rc; - - dev->i2c_adap.owner = THIS_MODULE; - dev->i2c_adap.algo = &tm6000_algo; - dev->i2c_adap.dev.parent = &dev->udev->dev; - strscpy(dev->i2c_adap.name, dev->name, sizeof(dev->i2c_adap.name)); - dev->i2c_adap.algo_data = dev; - i2c_set_adapdata(&dev->i2c_adap, &dev->v4l2_dev); - rc = i2c_add_adapter(&dev->i2c_adap); - if (rc) - return rc; - - dev->i2c_client.adapter = &dev->i2c_adap; - strscpy(dev->i2c_client.name, "tm6000 internal", I2C_NAME_SIZE); - tm6000_i2c_eeprom(dev); - - return 0; -} - -/* - * tm6000_i2c_unregister() - * unregister i2c_bus - */ -int tm6000_i2c_unregister(struct tm6000_core *dev) -{ - i2c_del_adapter(&dev->i2c_adap); - return 0; -} diff --git a/drivers/staging/media/deprecated/tm6000/tm6000-input.c b/drivers/staging/media/deprecated/tm6000/tm6000-input.c deleted file mode 100644 index 5136e9e202f1..000000000000 --- a/drivers/staging/media/deprecated/tm6000/tm6000-input.c +++ /dev/null @@ -1,503 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * tm6000-input.c - driver for TM5600/TM6000/TM6010 USB video capture devices - * - * Copyright (C) 2010 Stefan Ringel - */ - -#include -#include -#include - -#include -#include - -#include - -#include "tm6000.h" -#include "tm6000-regs.h" - -static unsigned int ir_debug; -module_param(ir_debug, int, 0644); -MODULE_PARM_DESC(ir_debug, "debug message level"); - -static unsigned int enable_ir = 1; -module_param(enable_ir, int, 0644); -MODULE_PARM_DESC(enable_ir, "enable ir (default is enable)"); - -static unsigned int ir_clock_mhz = 12; -module_param(ir_clock_mhz, int, 0644); -MODULE_PARM_DESC(ir_clock_mhz, "ir clock, in MHz"); - -#define URB_SUBMIT_DELAY 100 /* ms - Delay to submit an URB request on retrial and init */ -#define URB_INT_LED_DELAY 100 /* ms - Delay to turn led on again on int mode */ - -#undef dprintk - -#define dprintk(level, fmt, arg...) do {\ - if (ir_debug >= level) \ - printk(KERN_DEBUG "%s/ir: " fmt, ir->name , ## arg); \ - } while (0) - -struct tm6000_ir_poll_result { - u16 rc_data; -}; - -struct tm6000_IR { - struct tm6000_core *dev; - struct rc_dev *rc; - char name[32]; - char phys[32]; - - /* poll expernal decoder */ - int polling; - struct delayed_work work; - u8 wait:1; - u8 pwled:2; - u8 submit_urb:1; - struct urb *int_urb; - - /* IR device properties */ - u64 rc_proto; -}; - -void tm6000_ir_wait(struct tm6000_core *dev, u8 state) -{ - struct tm6000_IR *ir = dev->ir; - - if (!dev->ir) - return; - - dprintk(2, "%s: %i\n",__func__, ir->wait); - - if (state) - ir->wait = 1; - else - ir->wait = 0; -} - -static int tm6000_ir_config(struct tm6000_IR *ir) -{ - struct tm6000_core *dev = ir->dev; - u32 pulse = 0, leader = 0; - - dprintk(2, "%s\n",__func__); - - /* - * The IR decoder supports RC-5 or NEC, with a configurable timing. - * The timing configuration there is not that accurate, as it uses - * approximate values. The NEC spec mentions a 562.5 unit period, - * and RC-5 uses a 888.8 period. - * Currently, driver assumes a clock provided by a 12 MHz XTAL, but - * a modprobe parameter can adjust it. - * Adjustments are required for other timings. - * It seems that the 900ms timing for NEC is used to detect a RC-5 - * IR, in order to discard such decoding - */ - - switch (ir->rc_proto) { - case RC_PROTO_BIT_NEC: - leader = 900; /* ms */ - pulse = 700; /* ms - the actual value would be 562 */ - break; - default: - case RC_PROTO_BIT_RC5: - leader = 900; /* ms - from the NEC decoding */ - pulse = 1780; /* ms - The actual value would be 1776 */ - break; - } - - pulse = ir_clock_mhz * pulse; - leader = ir_clock_mhz * leader; - if (ir->rc_proto == RC_PROTO_BIT_NEC) - leader = leader | 0x8000; - - dprintk(2, "%s: %s, %d MHz, leader = 0x%04x, pulse = 0x%06x \n", - __func__, - (ir->rc_proto == RC_PROTO_BIT_NEC) ? "NEC" : "RC-5", - ir_clock_mhz, leader, pulse); - - /* Remote WAKEUP = enable, normal mode, from IR decoder output */ - tm6000_set_reg(dev, TM6010_REQ07_RE5_REMOTE_WAKEUP, 0xfe); - - /* Enable IR reception on non-busrt mode */ - tm6000_set_reg(dev, TM6010_REQ07_RD8_IR, 0x2f); - - /* IR_WKUP_SEL = Low byte in decoded IR data */ - tm6000_set_reg(dev, TM6010_REQ07_RDA_IR_WAKEUP_SEL, 0xff); - /* IR_WKU_ADD code */ - tm6000_set_reg(dev, TM6010_REQ07_RDB_IR_WAKEUP_ADD, 0xff); - - tm6000_set_reg(dev, TM6010_REQ07_RDC_IR_LEADER1, leader >> 8); - tm6000_set_reg(dev, TM6010_REQ07_RDD_IR_LEADER0, leader); - - tm6000_set_reg(dev, TM6010_REQ07_RDE_IR_PULSE_CNT1, pulse >> 8); - tm6000_set_reg(dev, TM6010_REQ07_RDF_IR_PULSE_CNT0, pulse); - - if (!ir->polling) - tm6000_set_reg(dev, REQ_04_EN_DISABLE_MCU_INT, 2, 0); - else - tm6000_set_reg(dev, REQ_04_EN_DISABLE_MCU_INT, 2, 1); - msleep(10); - - /* Shows that IR is working via the LED */ - tm6000_flash_led(dev, 0); - msleep(100); - tm6000_flash_led(dev, 1); - ir->pwled = 1; - - return 0; -} - -static void tm6000_ir_keydown(struct tm6000_IR *ir, - const char *buf, unsigned int len) -{ - u8 device, command; - u32 scancode; - enum rc_proto protocol; - - if (len < 1) - return; - - command = buf[0]; - device = (len > 1 ? buf[1] : 0x0); - switch (ir->rc_proto) { - case RC_PROTO_BIT_RC5: - protocol = RC_PROTO_RC5; - scancode = RC_SCANCODE_RC5(device, command); - break; - case RC_PROTO_BIT_NEC: - protocol = RC_PROTO_NEC; - scancode = RC_SCANCODE_NEC(device, command); - break; - default: - protocol = RC_PROTO_OTHER; - scancode = RC_SCANCODE_OTHER(device << 8 | command); - break; - } - - dprintk(1, "%s, protocol: 0x%04x, scancode: 0x%08x\n", - __func__, protocol, scancode); - rc_keydown(ir->rc, protocol, scancode, 0); -} - -static void tm6000_ir_urb_received(struct urb *urb) -{ - struct tm6000_core *dev = urb->context; - struct tm6000_IR *ir = dev->ir; - char *buf; - - dprintk(2, "%s\n",__func__); - if (urb->status < 0 || urb->actual_length <= 0) { - printk(KERN_INFO "tm6000: IR URB failure: status: %i, length %i\n", - urb->status, urb->actual_length); - ir->submit_urb = 1; - schedule_delayed_work(&ir->work, msecs_to_jiffies(URB_SUBMIT_DELAY)); - return; - } - buf = urb->transfer_buffer; - - if (ir_debug) - print_hex_dump(KERN_DEBUG, "tm6000: IR data: ", - DUMP_PREFIX_OFFSET,16, 1, - buf, urb->actual_length, false); - - tm6000_ir_keydown(ir, urb->transfer_buffer, urb->actual_length); - - usb_submit_urb(urb, GFP_ATOMIC); - /* - * Flash the led. We can't do it here, as it is running on IRQ context. - * So, use the scheduler to do it, in a few ms. - */ - ir->pwled = 2; - schedule_delayed_work(&ir->work, msecs_to_jiffies(10)); -} - -static void tm6000_ir_handle_key(struct work_struct *work) -{ - struct tm6000_IR *ir = container_of(work, struct tm6000_IR, work.work); - struct tm6000_core *dev = ir->dev; - int rc; - u8 buf[2]; - - if (ir->wait) - return; - - dprintk(3, "%s\n",__func__); - - rc = tm6000_read_write_usb(dev, USB_DIR_IN | - USB_TYPE_VENDOR | USB_RECIP_DEVICE, - REQ_02_GET_IR_CODE, 0, 0, buf, 2); - if (rc < 0) - return; - - /* Check if something was read */ - if ((buf[0] & 0xff) == 0xff) { - if (!ir->pwled) { - tm6000_flash_led(dev, 1); - ir->pwled = 1; - } - return; - } - - tm6000_ir_keydown(ir, buf, rc); - tm6000_flash_led(dev, 0); - ir->pwled = 0; - - /* Re-schedule polling */ - schedule_delayed_work(&ir->work, msecs_to_jiffies(ir->polling)); -} - -static void tm6000_ir_int_work(struct work_struct *work) -{ - struct tm6000_IR *ir = container_of(work, struct tm6000_IR, work.work); - struct tm6000_core *dev = ir->dev; - int rc; - - dprintk(3, "%s, submit_urb = %d, pwled = %d\n",__func__, ir->submit_urb, - ir->pwled); - - if (ir->submit_urb) { - dprintk(3, "Resubmit urb\n"); - tm6000_set_reg(dev, REQ_04_EN_DISABLE_MCU_INT, 2, 0); - - rc = usb_submit_urb(ir->int_urb, GFP_ATOMIC); - if (rc < 0) { - printk(KERN_ERR "tm6000: Can't submit an IR interrupt. Error %i\n", - rc); - /* Retry in 100 ms */ - schedule_delayed_work(&ir->work, msecs_to_jiffies(URB_SUBMIT_DELAY)); - return; - } - ir->submit_urb = 0; - } - - /* Led is enabled only if USB submit doesn't fail */ - if (ir->pwled == 2) { - tm6000_flash_led(dev, 0); - ir->pwled = 0; - schedule_delayed_work(&ir->work, msecs_to_jiffies(URB_INT_LED_DELAY)); - } else if (!ir->pwled) { - tm6000_flash_led(dev, 1); - ir->pwled = 1; - } -} - -static int tm6000_ir_start(struct rc_dev *rc) -{ - struct tm6000_IR *ir = rc->priv; - - dprintk(2, "%s\n",__func__); - - schedule_delayed_work(&ir->work, 0); - - return 0; -} - -static void tm6000_ir_stop(struct rc_dev *rc) -{ - struct tm6000_IR *ir = rc->priv; - - dprintk(2, "%s\n",__func__); - - cancel_delayed_work_sync(&ir->work); -} - -static int tm6000_ir_change_protocol(struct rc_dev *rc, u64 *rc_proto) -{ - struct tm6000_IR *ir = rc->priv; - - if (!ir) - return 0; - - dprintk(2, "%s\n",__func__); - - ir->rc_proto = *rc_proto; - - tm6000_ir_config(ir); - /* TODO */ - return 0; -} - -static int __tm6000_ir_int_start(struct rc_dev *rc) -{ - struct tm6000_IR *ir = rc->priv; - struct tm6000_core *dev; - int pipe, size; - int err = -ENOMEM; - - if (!ir) - return -ENODEV; - dev = ir->dev; - - dprintk(2, "%s\n",__func__); - - ir->int_urb = usb_alloc_urb(0, GFP_ATOMIC); - if (!ir->int_urb) - return -ENOMEM; - - pipe = usb_rcvintpipe(dev->udev, - dev->int_in.endp->desc.bEndpointAddress - & USB_ENDPOINT_NUMBER_MASK); - - size = usb_maxpacket(dev->udev, pipe); - dprintk(1, "IR max size: %d\n", size); - - ir->int_urb->transfer_buffer = kzalloc(size, GFP_ATOMIC); - if (!ir->int_urb->transfer_buffer) { - usb_free_urb(ir->int_urb); - return err; - } - dprintk(1, "int interval: %d\n", dev->int_in.endp->desc.bInterval); - - usb_fill_int_urb(ir->int_urb, dev->udev, pipe, - ir->int_urb->transfer_buffer, size, - tm6000_ir_urb_received, dev, - dev->int_in.endp->desc.bInterval); - - ir->submit_urb = 1; - schedule_delayed_work(&ir->work, msecs_to_jiffies(URB_SUBMIT_DELAY)); - - return 0; -} - -static void __tm6000_ir_int_stop(struct rc_dev *rc) -{ - struct tm6000_IR *ir = rc->priv; - - if (!ir || !ir->int_urb) - return; - - dprintk(2, "%s\n",__func__); - - usb_kill_urb(ir->int_urb); - kfree(ir->int_urb->transfer_buffer); - usb_free_urb(ir->int_urb); - ir->int_urb = NULL; -} - -int tm6000_ir_int_start(struct tm6000_core *dev) -{ - struct tm6000_IR *ir = dev->ir; - - if (!ir) - return 0; - - return __tm6000_ir_int_start(ir->rc); -} - -void tm6000_ir_int_stop(struct tm6000_core *dev) -{ - struct tm6000_IR *ir = dev->ir; - - if (!ir || !ir->rc) - return; - - __tm6000_ir_int_stop(ir->rc); -} - -int tm6000_ir_init(struct tm6000_core *dev) -{ - struct tm6000_IR *ir; - struct rc_dev *rc; - int err = -ENOMEM; - u64 rc_proto; - - if (!enable_ir) - return -ENODEV; - - if (!dev->caps.has_remote) - return 0; - - if (!dev->ir_codes) - return 0; - - ir = kzalloc(sizeof(*ir), GFP_ATOMIC); - rc = rc_allocate_device(RC_DRIVER_SCANCODE); - if (!ir || !rc) - goto out; - - dprintk(2, "%s\n", __func__); - - /* record handles to ourself */ - ir->dev = dev; - dev->ir = ir; - ir->rc = rc; - - /* input setup */ - rc->allowed_protocols = RC_PROTO_BIT_RC5 | RC_PROTO_BIT_NEC; - /* Needed, in order to support NEC remotes with 24 or 32 bits */ - rc->scancode_mask = 0xffff; - rc->priv = ir; - rc->change_protocol = tm6000_ir_change_protocol; - if (dev->int_in.endp) { - rc->open = __tm6000_ir_int_start; - rc->close = __tm6000_ir_int_stop; - INIT_DELAYED_WORK(&ir->work, tm6000_ir_int_work); - } else { - rc->open = tm6000_ir_start; - rc->close = tm6000_ir_stop; - ir->polling = 50; - INIT_DELAYED_WORK(&ir->work, tm6000_ir_handle_key); - } - - snprintf(ir->name, sizeof(ir->name), "tm5600/60x0 IR (%s)", - dev->name); - - usb_make_path(dev->udev, ir->phys, sizeof(ir->phys)); - strlcat(ir->phys, "/input0", sizeof(ir->phys)); - - rc_proto = RC_PROTO_BIT_UNKNOWN; - tm6000_ir_change_protocol(rc, &rc_proto); - - rc->device_name = ir->name; - rc->input_phys = ir->phys; - rc->input_id.bustype = BUS_USB; - rc->input_id.version = 1; - rc->input_id.vendor = le16_to_cpu(dev->udev->descriptor.idVendor); - rc->input_id.product = le16_to_cpu(dev->udev->descriptor.idProduct); - rc->map_name = dev->ir_codes; - rc->driver_name = "tm6000"; - rc->dev.parent = &dev->udev->dev; - - /* ir register */ - err = rc_register_device(rc); - if (err) - goto out; - - return 0; - -out: - dev->ir = NULL; - rc_free_device(rc); - kfree(ir); - return err; -} - -int tm6000_ir_fini(struct tm6000_core *dev) -{ - struct tm6000_IR *ir = dev->ir; - - /* skip detach on non attached board */ - - if (!ir) - return 0; - - dprintk(2, "%s\n",__func__); - - if (!ir->polling) - __tm6000_ir_int_stop(ir->rc); - - tm6000_ir_stop(ir->rc); - - /* Turn off the led */ - tm6000_flash_led(dev, 0); - ir->pwled = 0; - - rc_unregister_device(ir->rc); - - kfree(ir); - dev->ir = NULL; - - return 0; -} diff --git a/drivers/staging/media/deprecated/tm6000/tm6000-regs.h b/drivers/staging/media/deprecated/tm6000/tm6000-regs.h deleted file mode 100644 index 6a181f2e7ef2..000000000000 --- a/drivers/staging/media/deprecated/tm6000/tm6000-regs.h +++ /dev/null @@ -1,588 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -/* - * tm6000-regs.h - driver for TM5600/TM6000/TM6010 USB video capture devices - * - * Copyright (c) 2006-2007 Mauro Carvalho Chehab - */ - -/* - * Define TV Master TM5600/TM6000/TM6010 Request codes - */ -#define REQ_00_SET_IR_VALUE 0 -#define REQ_01_SET_WAKEUP_IRCODE 1 -#define REQ_02_GET_IR_CODE 2 -#define REQ_03_SET_GET_MCU_PIN 3 -#define REQ_04_EN_DISABLE_MCU_INT 4 -#define REQ_05_SET_GET_USBREG 5 - /* Write: RegNum, Value, 0 */ - /* Read : RegNum, Value, 1, RegStatus */ -#define REQ_06_SET_GET_USBREG_BIT 6 -#define REQ_07_SET_GET_AVREG 7 - /* Write: RegNum, Value, 0 */ - /* Read : RegNum, Value, 1, RegStatus */ -#define REQ_08_SET_GET_AVREG_BIT 8 -#define REQ_09_SET_GET_TUNER_FQ 9 -#define REQ_10_SET_TUNER_SYSTEM 10 -#define REQ_11_SET_EEPROM_ADDR 11 -#define REQ_12_SET_GET_EEPROMBYTE 12 -#define REQ_13_GET_EEPROM_SEQREAD 13 -#define REQ_14_SET_GET_I2C_WR2_RDN 14 -#define REQ_15_SET_GET_I2CBYTE 15 - /* Write: Subaddr, Slave Addr, value, 0 */ - /* Read : Subaddr, Slave Addr, value, 1 */ -#define REQ_16_SET_GET_I2C_WR1_RDN 16 - /* Subaddr, Slave Addr, 0, length */ -#define REQ_17_SET_GET_I2CFP 17 - /* Write: Slave Addr, register, value */ - /* Read : Slave Addr, register, 2, data */ -#define REQ_20_DATA_TRANSFER 20 -#define REQ_30_I2C_WRITE 30 -#define REQ_31_I2C_READ 31 -#define REQ_35_AFTEK_TUNER_READ 35 -#define REQ_40_GET_VERSION 40 -#define REQ_50_SET_START 50 -#define REQ_51_SET_STOP 51 -#define REQ_52_TRANSMIT_DATA 52 -#define REQ_53_SPI_INITIAL 53 -#define REQ_54_SPI_SETSTART 54 -#define REQ_55_SPI_INOUTDATA 55 -#define REQ_56_SPI_SETSTOP 56 - -/* - * Define TV Master TM5600/TM6000/TM6010 GPIO lines - */ - -#define TM6000_GPIO_CLK 0x101 -#define TM6000_GPIO_DATA 0x100 - -#define TM6000_GPIO_1 0x102 -#define TM6000_GPIO_2 0x103 -#define TM6000_GPIO_3 0x104 -#define TM6000_GPIO_4 0x300 -#define TM6000_GPIO_5 0x301 -#define TM6000_GPIO_6 0x304 -#define TM6000_GPIO_7 0x305 - -/* tm6010 defines GPIO with different values */ -#define TM6010_GPIO_0 0x0102 -#define TM6010_GPIO_1 0x0103 -#define TM6010_GPIO_2 0x0104 -#define TM6010_GPIO_3 0x0105 -#define TM6010_GPIO_4 0x0106 -#define TM6010_GPIO_5 0x0107 -#define TM6010_GPIO_6 0x0300 -#define TM6010_GPIO_7 0x0301 -#define TM6010_GPIO_9 0x0305 -/* - * Define TV Master TM5600/TM6000/TM6010 URB message codes and length - */ - -enum { - TM6000_URB_MSG_VIDEO = 1, - TM6000_URB_MSG_AUDIO, - TM6000_URB_MSG_VBI, - TM6000_URB_MSG_PTS, - TM6000_URB_MSG_ERR, -}; - -/* Define specific TM6000 Video decoder registers */ -#define TM6000_REQ07_RD8_TEST_SEL 0x07, 0xd8 -#define TM6000_REQ07_RD9_A_SIM_SEL 0x07, 0xd9 -#define TM6000_REQ07_RDA_CLK_SEL 0x07, 0xda -#define TM6000_REQ07_RDB_OUT_SEL 0x07, 0xdb -#define TM6000_REQ07_RDC_NSEL_I2S 0x07, 0xdc -#define TM6000_REQ07_RDD_GPIO2_MDRV 0x07, 0xdd -#define TM6000_REQ07_RDE_GPIO1_MDRV 0x07, 0xde -#define TM6000_REQ07_RDF_PWDOWN_ACLK 0x07, 0xdf -#define TM6000_REQ07_RE0_VADC_REF_CTL 0x07, 0xe0 -#define TM6000_REQ07_RE1_VADC_DACLIMP 0x07, 0xe1 -#define TM6000_REQ07_RE2_VADC_STATUS_CTL 0x07, 0xe2 -#define TM6000_REQ07_RE3_VADC_INP_LPF_SEL1 0x07, 0xe3 -#define TM6000_REQ07_RE4_VADC_TARGET1 0x07, 0xe4 -#define TM6000_REQ07_RE5_VADC_INP_LPF_SEL2 0x07, 0xe5 -#define TM6000_REQ07_RE6_VADC_TARGET2 0x07, 0xe6 -#define TM6000_REQ07_RE7_VADC_AGAIN_CTL 0x07, 0xe7 -#define TM6000_REQ07_RE8_VADC_PWDOWN_CTL 0x07, 0xe8 -#define TM6000_REQ07_RE9_VADC_INPUT_CTL1 0x07, 0xe9 -#define TM6000_REQ07_REA_VADC_INPUT_CTL2 0x07, 0xea -#define TM6000_REQ07_REB_VADC_AADC_MODE 0x07, 0xeb -#define TM6000_REQ07_REC_VADC_AADC_LVOL 0x07, 0xec -#define TM6000_REQ07_RED_VADC_AADC_RVOL 0x07, 0xed -#define TM6000_REQ07_REE_VADC_CTRL_SEL_CONTROL 0x07, 0xee -#define TM6000_REQ07_REF_VADC_GAIN_MAP_CTL 0x07, 0xef -#define TM6000_REQ07_RFD_BIST_ERR_VST_LOW 0x07, 0xfd -#define TM6000_REQ07_RFE_BIST_ERR_VST_HIGH 0x07, 0xfe - -/* Define TM6000/TM6010 Video decoder registers */ -#define TM6010_REQ07_R00_VIDEO_CONTROL0 0x07, 0x00 -#define TM6010_REQ07_R01_VIDEO_CONTROL1 0x07, 0x01 -#define TM6010_REQ07_R02_VIDEO_CONTROL2 0x07, 0x02 -#define TM6010_REQ07_R03_YC_SEP_CONTROL 0x07, 0x03 -#define TM6010_REQ07_R04_LUMA_HAGC_CONTROL 0x07, 0x04 -#define TM6010_REQ07_R05_NOISE_THRESHOLD 0x07, 0x05 -#define TM6010_REQ07_R06_AGC_GATE_THRESHOLD 0x07, 0x06 -#define TM6010_REQ07_R07_OUTPUT_CONTROL 0x07, 0x07 -#define TM6010_REQ07_R08_LUMA_CONTRAST_ADJ 0x07, 0x08 -#define TM6010_REQ07_R09_LUMA_BRIGHTNESS_ADJ 0x07, 0x09 -#define TM6010_REQ07_R0A_CHROMA_SATURATION_ADJ 0x07, 0x0a -#define TM6010_REQ07_R0B_CHROMA_HUE_PHASE_ADJ 0x07, 0x0b -#define TM6010_REQ07_R0C_CHROMA_AGC_CONTROL 0x07, 0x0c -#define TM6010_REQ07_R0D_CHROMA_KILL_LEVEL 0x07, 0x0d -#define TM6010_REQ07_R0F_CHROMA_AUTO_POSITION 0x07, 0x0f -#define TM6010_REQ07_R10_AGC_PEAK_NOMINAL 0x07, 0x10 -#define TM6010_REQ07_R11_AGC_PEAK_CONTROL 0x07, 0x11 -#define TM6010_REQ07_R12_AGC_GATE_STARTH 0x07, 0x12 -#define TM6010_REQ07_R13_AGC_GATE_STARTL 0x07, 0x13 -#define TM6010_REQ07_R14_AGC_GATE_WIDTH 0x07, 0x14 -#define TM6010_REQ07_R15_AGC_BP_DELAY 0x07, 0x15 -#define TM6010_REQ07_R16_LOCK_COUNT 0x07, 0x16 -#define TM6010_REQ07_R17_HLOOP_MAXSTATE 0x07, 0x17 -#define TM6010_REQ07_R18_CHROMA_DTO_INCREMENT3 0x07, 0x18 -#define TM6010_REQ07_R19_CHROMA_DTO_INCREMENT2 0x07, 0x19 -#define TM6010_REQ07_R1A_CHROMA_DTO_INCREMENT1 0x07, 0x1a -#define TM6010_REQ07_R1B_CHROMA_DTO_INCREMENT0 0x07, 0x1b -#define TM6010_REQ07_R1C_HSYNC_DTO_INCREMENT3 0x07, 0x1c -#define TM6010_REQ07_R1D_HSYNC_DTO_INCREMENT2 0x07, 0x1d -#define TM6010_REQ07_R1E_HSYNC_DTO_INCREMENT1 0x07, 0x1e -#define TM6010_REQ07_R1F_HSYNC_DTO_INCREMENT0 0x07, 0x1f -#define TM6010_REQ07_R20_HSYNC_RISING_EDGE_TIME 0x07, 0x20 -#define TM6010_REQ07_R21_HSYNC_PHASE_OFFSET 0x07, 0x21 -#define TM6010_REQ07_R22_HSYNC_PLL_START_TIME 0x07, 0x22 -#define TM6010_REQ07_R23_HSYNC_PLL_END_TIME 0x07, 0x23 -#define TM6010_REQ07_R24_HSYNC_TIP_START_TIME 0x07, 0x24 -#define TM6010_REQ07_R25_HSYNC_TIP_END_TIME 0x07, 0x25 -#define TM6010_REQ07_R26_HSYNC_RISING_EDGE_START 0x07, 0x26 -#define TM6010_REQ07_R27_HSYNC_RISING_EDGE_END 0x07, 0x27 -#define TM6010_REQ07_R28_BACKPORCH_START 0x07, 0x28 -#define TM6010_REQ07_R29_BACKPORCH_END 0x07, 0x29 -#define TM6010_REQ07_R2A_HSYNC_FILTER_START 0x07, 0x2a -#define TM6010_REQ07_R2B_HSYNC_FILTER_END 0x07, 0x2b -#define TM6010_REQ07_R2C_CHROMA_BURST_START 0x07, 0x2c -#define TM6010_REQ07_R2D_CHROMA_BURST_END 0x07, 0x2d -#define TM6010_REQ07_R2E_ACTIVE_VIDEO_HSTART 0x07, 0x2e -#define TM6010_REQ07_R2F_ACTIVE_VIDEO_HWIDTH 0x07, 0x2f -#define TM6010_REQ07_R30_ACTIVE_VIDEO_VSTART 0x07, 0x30 -#define TM6010_REQ07_R31_ACTIVE_VIDEO_VHIGHT 0x07, 0x31 -#define TM6010_REQ07_R32_VSYNC_HLOCK_MIN 0x07, 0x32 -#define TM6010_REQ07_R33_VSYNC_HLOCK_MAX 0x07, 0x33 -#define TM6010_REQ07_R34_VSYNC_AGC_MIN 0x07, 0x34 -#define TM6010_REQ07_R35_VSYNC_AGC_MAX 0x07, 0x35 -#define TM6010_REQ07_R36_VSYNC_VBI_MIN 0x07, 0x36 -#define TM6010_REQ07_R37_VSYNC_VBI_MAX 0x07, 0x37 -#define TM6010_REQ07_R38_VSYNC_THRESHOLD 0x07, 0x38 -#define TM6010_REQ07_R39_VSYNC_TIME_CONSTANT 0x07, 0x39 -#define TM6010_REQ07_R3A_STATUS1 0x07, 0x3a -#define TM6010_REQ07_R3B_STATUS2 0x07, 0x3b -#define TM6010_REQ07_R3C_STATUS3 0x07, 0x3c -#define TM6010_REQ07_R3F_RESET 0x07, 0x3f -#define TM6010_REQ07_R40_TELETEXT_VBI_CODE0 0x07, 0x40 -#define TM6010_REQ07_R41_TELETEXT_VBI_CODE1 0x07, 0x41 -#define TM6010_REQ07_R42_VBI_DATA_HIGH_LEVEL 0x07, 0x42 -#define TM6010_REQ07_R43_VBI_DATA_TYPE_LINE7 0x07, 0x43 -#define TM6010_REQ07_R44_VBI_DATA_TYPE_LINE8 0x07, 0x44 -#define TM6010_REQ07_R45_VBI_DATA_TYPE_LINE9 0x07, 0x45 -#define TM6010_REQ07_R46_VBI_DATA_TYPE_LINE10 0x07, 0x46 -#define TM6010_REQ07_R47_VBI_DATA_TYPE_LINE11 0x07, 0x47 -#define TM6010_REQ07_R48_VBI_DATA_TYPE_LINE12 0x07, 0x48 -#define TM6010_REQ07_R49_VBI_DATA_TYPE_LINE13 0x07, 0x49 -#define TM6010_REQ07_R4A_VBI_DATA_TYPE_LINE14 0x07, 0x4a -#define TM6010_REQ07_R4B_VBI_DATA_TYPE_LINE15 0x07, 0x4b -#define TM6010_REQ07_R4C_VBI_DATA_TYPE_LINE16 0x07, 0x4c -#define TM6010_REQ07_R4D_VBI_DATA_TYPE_LINE17 0x07, 0x4d -#define TM6010_REQ07_R4E_VBI_DATA_TYPE_LINE18 0x07, 0x4e -#define TM6010_REQ07_R4F_VBI_DATA_TYPE_LINE19 0x07, 0x4f -#define TM6010_REQ07_R50_VBI_DATA_TYPE_LINE20 0x07, 0x50 -#define TM6010_REQ07_R51_VBI_DATA_TYPE_LINE21 0x07, 0x51 -#define TM6010_REQ07_R52_VBI_DATA_TYPE_LINE22 0x07, 0x52 -#define TM6010_REQ07_R53_VBI_DATA_TYPE_LINE23 0x07, 0x53 -#define TM6010_REQ07_R54_VBI_DATA_TYPE_RLINES 0x07, 0x54 -#define TM6010_REQ07_R55_VBI_LOOP_FILTER_GAIN 0x07, 0x55 -#define TM6010_REQ07_R56_VBI_LOOP_FILTER_I_GAIN 0x07, 0x56 -#define TM6010_REQ07_R57_VBI_LOOP_FILTER_P_GAIN 0x07, 0x57 -#define TM6010_REQ07_R58_VBI_CAPTION_DTO1 0x07, 0x58 -#define TM6010_REQ07_R59_VBI_CAPTION_DTO0 0x07, 0x59 -#define TM6010_REQ07_R5A_VBI_TELETEXT_DTO1 0x07, 0x5a -#define TM6010_REQ07_R5B_VBI_TELETEXT_DTO0 0x07, 0x5b -#define TM6010_REQ07_R5C_VBI_WSS625_DTO1 0x07, 0x5c -#define TM6010_REQ07_R5D_VBI_WSS625_DTO0 0x07, 0x5d -#define TM6010_REQ07_R5E_VBI_CAPTION_FRAME_START 0x07, 0x5e -#define TM6010_REQ07_R5F_VBI_WSS625_FRAME_START 0x07, 0x5f -#define TM6010_REQ07_R60_TELETEXT_FRAME_START 0x07, 0x60 -#define TM6010_REQ07_R61_VBI_CCDATA1 0x07, 0x61 -#define TM6010_REQ07_R62_VBI_CCDATA2 0x07, 0x62 -#define TM6010_REQ07_R63_VBI_WSS625_DATA1 0x07, 0x63 -#define TM6010_REQ07_R64_VBI_WSS625_DATA2 0x07, 0x64 -#define TM6010_REQ07_R65_VBI_DATA_STATUS 0x07, 0x65 -#define TM6010_REQ07_R66_VBI_CAPTION_START 0x07, 0x66 -#define TM6010_REQ07_R67_VBI_WSS625_START 0x07, 0x67 -#define TM6010_REQ07_R68_VBI_TELETEXT_START 0x07, 0x68 -#define TM6010_REQ07_R70_HSYNC_DTO_INC_STATUS3 0x07, 0x70 -#define TM6010_REQ07_R71_HSYNC_DTO_INC_STATUS2 0x07, 0x71 -#define TM6010_REQ07_R72_HSYNC_DTO_INC_STATUS1 0x07, 0x72 -#define TM6010_REQ07_R73_HSYNC_DTO_INC_STATUS0 0x07, 0x73 -#define TM6010_REQ07_R74_CHROMA_DTO_INC_STATUS3 0x07, 0x74 -#define TM6010_REQ07_R75_CHROMA_DTO_INC_STATUS2 0x07, 0x75 -#define TM6010_REQ07_R76_CHROMA_DTO_INC_STATUS1 0x07, 0x76 -#define TM6010_REQ07_R77_CHROMA_DTO_INC_STATUS0 0x07, 0x77 -#define TM6010_REQ07_R78_AGC_AGAIN_STATUS 0x07, 0x78 -#define TM6010_REQ07_R79_AGC_DGAIN_STATUS 0x07, 0x79 -#define TM6010_REQ07_R7A_CHROMA_MAG_STATUS 0x07, 0x7a -#define TM6010_REQ07_R7B_CHROMA_GAIN_STATUS1 0x07, 0x7b -#define TM6010_REQ07_R7C_CHROMA_GAIN_STATUS0 0x07, 0x7c -#define TM6010_REQ07_R7D_CORDIC_FREQ_STATUS 0x07, 0x7d -#define TM6010_REQ07_R7F_STATUS_NOISE 0x07, 0x7f -#define TM6010_REQ07_R80_COMB_FILTER_TRESHOLD 0x07, 0x80 -#define TM6010_REQ07_R82_COMB_FILTER_CONFIG 0x07, 0x82 -#define TM6010_REQ07_R83_CHROMA_LOCK_CONFIG 0x07, 0x83 -#define TM6010_REQ07_R84_NOISE_NTSC_C 0x07, 0x84 -#define TM6010_REQ07_R85_NOISE_PAL_C 0x07, 0x85 -#define TM6010_REQ07_R86_NOISE_PHASE_C 0x07, 0x86 -#define TM6010_REQ07_R87_NOISE_PHASE_Y 0x07, 0x87 -#define TM6010_REQ07_R8A_CHROMA_LOOPFILTER_STATE 0x07, 0x8a -#define TM6010_REQ07_R8B_CHROMA_HRESAMPLER 0x07, 0x8b -#define TM6010_REQ07_R8D_CPUMP_DELAY_ADJ 0x07, 0x8d -#define TM6010_REQ07_R8E_CPUMP_ADJ 0x07, 0x8e -#define TM6010_REQ07_R8F_CPUMP_DELAY 0x07, 0x8f - -/* Define TM6000/TM6010 Miscellaneous registers */ -#define TM6010_REQ07_RC0_ACTIVE_VIDEO_SOURCE 0x07, 0xc0 -#define TM6010_REQ07_RC1_TRESHOLD 0x07, 0xc1 -#define TM6010_REQ07_RC2_HSYNC_WIDTH 0x07, 0xc2 -#define TM6010_REQ07_RC3_HSTART1 0x07, 0xc3 -#define TM6010_REQ07_RC4_HSTART0 0x07, 0xc4 -#define TM6010_REQ07_RC5_HEND1 0x07, 0xc5 -#define TM6010_REQ07_RC6_HEND0 0x07, 0xc6 -#define TM6010_REQ07_RC7_VSTART1 0x07, 0xc7 -#define TM6010_REQ07_RC8_VSTART0 0x07, 0xc8 -#define TM6010_REQ07_RC9_VEND1 0x07, 0xc9 -#define TM6010_REQ07_RCA_VEND0 0x07, 0xca -#define TM6010_REQ07_RCB_DELAY 0x07, 0xcb -/* ONLY for TM6010 */ -#define TM6010_REQ07_RCC_ACTIVE_IF 0x07, 0xcc -#define TM6010_REQ07_RCC_ACTIVE_IF_VIDEO_ENABLE (1 << 5) -#define TM6010_REQ07_RCC_ACTIVE_IF_AUDIO_ENABLE (1 << 6) -#define TM6010_REQ07_RD0_USB_PERIPHERY_CONTROL 0x07, 0xd0 -#define TM6010_REQ07_RD1_ADDR_FOR_REQ1 0x07, 0xd1 -#define TM6010_REQ07_RD2_ADDR_FOR_REQ2 0x07, 0xd2 -#define TM6010_REQ07_RD3_ADDR_FOR_REQ3 0x07, 0xd3 -#define TM6010_REQ07_RD4_ADDR_FOR_REQ4 0x07, 0xd4 -#define TM6010_REQ07_RD5_POWERSAVE 0x07, 0xd5 -#define TM6010_REQ07_RD6_ENDP_REQ1_REQ2 0x07, 0xd6 -#define TM6010_REQ07_RD7_ENDP_REQ3_REQ4 0x07, 0xd7 -/* ONLY for TM6010 */ -#define TM6010_REQ07_RD8_IR 0x07, 0xd8 -/* ONLY for TM6010 */ -#define TM6010_REQ07_RD9_IR_BSIZE 0x07, 0xd9 -/* ONLY for TM6010 */ -#define TM6010_REQ07_RDA_IR_WAKEUP_SEL 0x07, 0xda -/* ONLY for TM6010 */ -#define TM6010_REQ07_RDB_IR_WAKEUP_ADD 0x07, 0xdb -/* ONLY for TM6010 */ -#define TM6010_REQ07_RDC_IR_LEADER1 0x07, 0xdc -/* ONLY for TM6010 */ -#define TM6010_REQ07_RDD_IR_LEADER0 0x07, 0xdd -/* ONLY for TM6010 */ -#define TM6010_REQ07_RDE_IR_PULSE_CNT1 0x07, 0xde -/* ONLY for TM6010 */ -#define TM6010_REQ07_RDF_IR_PULSE_CNT0 0x07, 0xdf -/* ONLY for TM6010 */ -#define TM6010_REQ07_RE0_DVIDEO_SOURCE 0x07, 0xe0 -/* ONLY for TM6010 */ -#define TM6010_REQ07_RE0_DVIDEO_SOURCE_IF 0x07, 0xe1 -/* ONLY for TM6010 */ -#define TM6010_REQ07_RE2_OUT_SEL2 0x07, 0xe2 -/* ONLY for TM6010 */ -#define TM6010_REQ07_RE3_OUT_SEL1 0x07, 0xe3 -/* ONLY for TM6010 */ -#define TM6010_REQ07_RE4_OUT_SEL0 0x07, 0xe4 -/* ONLY for TM6010 */ -#define TM6010_REQ07_RE5_REMOTE_WAKEUP 0x07, 0xe5 -/* ONLY for TM6010 */ -#define TM6010_REQ07_RE7_PUB_GPIO 0x07, 0xe7 -/* ONLY for TM6010 */ -#define TM6010_REQ07_RE8_TYPESEL_MOS_I2S 0x07, 0xe8 -/* ONLY for TM6010 */ -#define TM6010_REQ07_RE9_TYPESEL_MOS_TS 0x07, 0xe9 -/* ONLY for TM6010 */ -#define TM6010_REQ07_REA_TYPESEL_MOS_CCIR 0x07, 0xea -/* ONLY for TM6010 */ -#define TM6010_REQ07_RF0_BIST_CRC_RESULT0 0x07, 0xf0 -/* ONLY for TM6010 */ -#define TM6010_REQ07_RF1_BIST_CRC_RESULT1 0x07, 0xf1 -/* ONLY for TM6010 */ -#define TM6010_REQ07_RF2_BIST_CRC_RESULT2 0x07, 0xf2 -/* ONLY for TM6010 */ -#define TM6010_REQ07_RF3_BIST_CRC_RESULT3 0x07, 0xf3 -/* ONLY for TM6010 */ -#define TM6010_REQ07_RF4_BIST_ERR_VST2 0x07, 0xf4 -/* ONLY for TM6010 */ -#define TM6010_REQ07_RF5_BIST_ERR_VST1 0x07, 0xf5 -/* ONLY for TM6010 */ -#define TM6010_REQ07_RF6_BIST_ERR_VST0 0x07, 0xf6 -/* ONLY for TM6010 */ -#define TM6010_REQ07_RF7_BIST 0x07, 0xf7 -/* ONLY for TM6010 */ -#define TM6010_REQ07_RFE_POWER_DOWN 0x07, 0xfe -#define TM6010_REQ07_RFF_SOFT_RESET 0x07, 0xff - -/* Define TM6000/TM6010 USB registers */ -#define TM6010_REQ05_R00_MAIN_CTRL 0x05, 0x00 -#define TM6010_REQ05_R01_DEVADDR 0x05, 0x01 -#define TM6010_REQ05_R02_TEST 0x05, 0x02 -#define TM6010_REQ05_R04_SOFN0 0x05, 0x04 -#define TM6010_REQ05_R05_SOFN1 0x05, 0x05 -#define TM6010_REQ05_R06_SOFTM0 0x05, 0x06 -#define TM6010_REQ05_R07_SOFTM1 0x05, 0x07 -#define TM6010_REQ05_R08_PHY_TEST 0x05, 0x08 -#define TM6010_REQ05_R09_VCTL 0x05, 0x09 -#define TM6010_REQ05_R0A_VSTA 0x05, 0x0a -#define TM6010_REQ05_R0B_CX_CFG 0x05, 0x0b -#define TM6010_REQ05_R0C_ENDP0_REG0 0x05, 0x0c -#define TM6010_REQ05_R10_GMASK 0x05, 0x10 -#define TM6010_REQ05_R11_IMASK0 0x05, 0x11 -#define TM6010_REQ05_R12_IMASK1 0x05, 0x12 -#define TM6010_REQ05_R13_IMASK2 0x05, 0x13 -#define TM6010_REQ05_R14_IMASK3 0x05, 0x14 -#define TM6010_REQ05_R15_IMASK4 0x05, 0x15 -#define TM6010_REQ05_R16_IMASK5 0x05, 0x16 -#define TM6010_REQ05_R17_IMASK6 0x05, 0x17 -#define TM6010_REQ05_R18_IMASK7 0x05, 0x18 -#define TM6010_REQ05_R19_ZEROP0 0x05, 0x19 -#define TM6010_REQ05_R1A_ZEROP1 0x05, 0x1a -#define TM6010_REQ05_R1C_FIFO_EMP0 0x05, 0x1c -#define TM6010_REQ05_R1D_FIFO_EMP1 0x05, 0x1d -#define TM6010_REQ05_R20_IRQ_GROUP 0x05, 0x20 -#define TM6010_REQ05_R21_IRQ_SOURCE0 0x05, 0x21 -#define TM6010_REQ05_R22_IRQ_SOURCE1 0x05, 0x22 -#define TM6010_REQ05_R23_IRQ_SOURCE2 0x05, 0x23 -#define TM6010_REQ05_R24_IRQ_SOURCE3 0x05, 0x24 -#define TM6010_REQ05_R25_IRQ_SOURCE4 0x05, 0x25 -#define TM6010_REQ05_R26_IRQ_SOURCE5 0x05, 0x26 -#define TM6010_REQ05_R27_IRQ_SOURCE6 0x05, 0x27 -#define TM6010_REQ05_R28_IRQ_SOURCE7 0x05, 0x28 -#define TM6010_REQ05_R29_SEQ_ERR0 0x05, 0x29 -#define TM6010_REQ05_R2A_SEQ_ERR1 0x05, 0x2a -#define TM6010_REQ05_R2B_SEQ_ABORT0 0x05, 0x2b -#define TM6010_REQ05_R2C_SEQ_ABORT1 0x05, 0x2c -#define TM6010_REQ05_R2D_TX_ZERO0 0x05, 0x2d -#define TM6010_REQ05_R2E_TX_ZERO1 0x05, 0x2e -#define TM6010_REQ05_R2F_IDLE_CNT 0x05, 0x2f -#define TM6010_REQ05_R30_FNO_P1 0x05, 0x30 -#define TM6010_REQ05_R31_FNO_P2 0x05, 0x31 -#define TM6010_REQ05_R32_FNO_P3 0x05, 0x32 -#define TM6010_REQ05_R33_FNO_P4 0x05, 0x33 -#define TM6010_REQ05_R34_FNO_P5 0x05, 0x34 -#define TM6010_REQ05_R35_FNO_P6 0x05, 0x35 -#define TM6010_REQ05_R36_FNO_P7 0x05, 0x36 -#define TM6010_REQ05_R37_FNO_P8 0x05, 0x37 -#define TM6010_REQ05_R38_FNO_P9 0x05, 0x38 -#define TM6010_REQ05_R30_FNO_P10 0x05, 0x39 -#define TM6010_REQ05_R30_FNO_P11 0x05, 0x3a -#define TM6010_REQ05_R30_FNO_P12 0x05, 0x3b -#define TM6010_REQ05_R30_FNO_P13 0x05, 0x3c -#define TM6010_REQ05_R30_FNO_P14 0x05, 0x3d -#define TM6010_REQ05_R30_FNO_P15 0x05, 0x3e -#define TM6010_REQ05_R40_IN_MAXPS_LOW1 0x05, 0x40 -#define TM6010_REQ05_R41_IN_MAXPS_HIGH1 0x05, 0x41 -#define TM6010_REQ05_R42_IN_MAXPS_LOW2 0x05, 0x42 -#define TM6010_REQ05_R43_IN_MAXPS_HIGH2 0x05, 0x43 -#define TM6010_REQ05_R44_IN_MAXPS_LOW3 0x05, 0x44 -#define TM6010_REQ05_R45_IN_MAXPS_HIGH3 0x05, 0x45 -#define TM6010_REQ05_R46_IN_MAXPS_LOW4 0x05, 0x46 -#define TM6010_REQ05_R47_IN_MAXPS_HIGH4 0x05, 0x47 -#define TM6010_REQ05_R48_IN_MAXPS_LOW5 0x05, 0x48 -#define TM6010_REQ05_R49_IN_MAXPS_HIGH5 0x05, 0x49 -#define TM6010_REQ05_R4A_IN_MAXPS_LOW6 0x05, 0x4a -#define TM6010_REQ05_R4B_IN_MAXPS_HIGH6 0x05, 0x4b -#define TM6010_REQ05_R4C_IN_MAXPS_LOW7 0x05, 0x4c -#define TM6010_REQ05_R4D_IN_MAXPS_HIGH7 0x05, 0x4d -#define TM6010_REQ05_R4E_IN_MAXPS_LOW8 0x05, 0x4e -#define TM6010_REQ05_R4F_IN_MAXPS_HIGH8 0x05, 0x4f -#define TM6010_REQ05_R50_IN_MAXPS_LOW9 0x05, 0x50 -#define TM6010_REQ05_R51_IN_MAXPS_HIGH9 0x05, 0x51 -#define TM6010_REQ05_R40_IN_MAXPS_LOW10 0x05, 0x52 -#define TM6010_REQ05_R41_IN_MAXPS_HIGH10 0x05, 0x53 -#define TM6010_REQ05_R40_IN_MAXPS_LOW11 0x05, 0x54 -#define TM6010_REQ05_R41_IN_MAXPS_HIGH11 0x05, 0x55 -#define TM6010_REQ05_R40_IN_MAXPS_LOW12 0x05, 0x56 -#define TM6010_REQ05_R41_IN_MAXPS_HIGH12 0x05, 0x57 -#define TM6010_REQ05_R40_IN_MAXPS_LOW13 0x05, 0x58 -#define TM6010_REQ05_R41_IN_MAXPS_HIGH13 0x05, 0x59 -#define TM6010_REQ05_R40_IN_MAXPS_LOW14 0x05, 0x5a -#define TM6010_REQ05_R41_IN_MAXPS_HIGH14 0x05, 0x5b -#define TM6010_REQ05_R40_IN_MAXPS_LOW15 0x05, 0x5c -#define TM6010_REQ05_R41_IN_MAXPS_HIGH15 0x05, 0x5d -#define TM6010_REQ05_R60_OUT_MAXPS_LOW1 0x05, 0x60 -#define TM6010_REQ05_R61_OUT_MAXPS_HIGH1 0x05, 0x61 -#define TM6010_REQ05_R62_OUT_MAXPS_LOW2 0x05, 0x62 -#define TM6010_REQ05_R63_OUT_MAXPS_HIGH2 0x05, 0x63 -#define TM6010_REQ05_R64_OUT_MAXPS_LOW3 0x05, 0x64 -#define TM6010_REQ05_R65_OUT_MAXPS_HIGH3 0x05, 0x65 -#define TM6010_REQ05_R66_OUT_MAXPS_LOW4 0x05, 0x66 -#define TM6010_REQ05_R67_OUT_MAXPS_HIGH4 0x05, 0x67 -#define TM6010_REQ05_R68_OUT_MAXPS_LOW5 0x05, 0x68 -#define TM6010_REQ05_R69_OUT_MAXPS_HIGH5 0x05, 0x69 -#define TM6010_REQ05_R6A_OUT_MAXPS_LOW6 0x05, 0x6a -#define TM6010_REQ05_R6B_OUT_MAXPS_HIGH6 0x05, 0x6b -#define TM6010_REQ05_R6C_OUT_MAXPS_LOW7 0x05, 0x6c -#define TM6010_REQ05_R6D_OUT_MAXPS_HIGH7 0x05, 0x6d -#define TM6010_REQ05_R6E_OUT_MAXPS_LOW8 0x05, 0x6e -#define TM6010_REQ05_R6F_OUT_MAXPS_HIGH8 0x05, 0x6f -#define TM6010_REQ05_R70_OUT_MAXPS_LOW9 0x05, 0x70 -#define TM6010_REQ05_R71_OUT_MAXPS_HIGH9 0x05, 0x71 -#define TM6010_REQ05_R60_OUT_MAXPS_LOW10 0x05, 0x72 -#define TM6010_REQ05_R61_OUT_MAXPS_HIGH10 0x05, 0x73 -#define TM6010_REQ05_R60_OUT_MAXPS_LOW11 0x05, 0x74 -#define TM6010_REQ05_R61_OUT_MAXPS_HIGH11 0x05, 0x75 -#define TM6010_REQ05_R60_OUT_MAXPS_LOW12 0x05, 0x76 -#define TM6010_REQ05_R61_OUT_MAXPS_HIGH12 0x05, 0x77 -#define TM6010_REQ05_R60_OUT_MAXPS_LOW13 0x05, 0x78 -#define TM6010_REQ05_R61_OUT_MAXPS_HIGH13 0x05, 0x79 -#define TM6010_REQ05_R60_OUT_MAXPS_LOW14 0x05, 0x7a -#define TM6010_REQ05_R61_OUT_MAXPS_HIGH14 0x05, 0x7b -#define TM6010_REQ05_R60_OUT_MAXPS_LOW15 0x05, 0x7c -#define TM6010_REQ05_R61_OUT_MAXPS_HIGH15 0x05, 0x7d -#define TM6010_REQ05_R80_FIFO0 0x05, 0x80 -#define TM6010_REQ05_R81_FIFO1 0x05, 0x81 -#define TM6010_REQ05_R82_FIFO2 0x05, 0x82 -#define TM6010_REQ05_R83_FIFO3 0x05, 0x83 -#define TM6010_REQ05_R84_FIFO4 0x05, 0x84 -#define TM6010_REQ05_R85_FIFO5 0x05, 0x85 -#define TM6010_REQ05_R86_FIFO6 0x05, 0x86 -#define TM6010_REQ05_R87_FIFO7 0x05, 0x87 -#define TM6010_REQ05_R88_FIFO8 0x05, 0x88 -#define TM6010_REQ05_R89_FIFO9 0x05, 0x89 -#define TM6010_REQ05_R81_FIFO10 0x05, 0x8a -#define TM6010_REQ05_R81_FIFO11 0x05, 0x8b -#define TM6010_REQ05_R81_FIFO12 0x05, 0x8c -#define TM6010_REQ05_R81_FIFO13 0x05, 0x8d -#define TM6010_REQ05_R81_FIFO14 0x05, 0x8e -#define TM6010_REQ05_R81_FIFO15 0x05, 0x8f -#define TM6010_REQ05_R90_CFG_FIFO0 0x05, 0x90 -#define TM6010_REQ05_R91_CFG_FIFO1 0x05, 0x91 -#define TM6010_REQ05_R92_CFG_FIFO2 0x05, 0x92 -#define TM6010_REQ05_R93_CFG_FIFO3 0x05, 0x93 -#define TM6010_REQ05_R94_CFG_FIFO4 0x05, 0x94 -#define TM6010_REQ05_R95_CFG_FIFO5 0x05, 0x95 -#define TM6010_REQ05_R96_CFG_FIFO6 0x05, 0x96 -#define TM6010_REQ05_R97_CFG_FIFO7 0x05, 0x97 -#define TM6010_REQ05_R98_CFG_FIFO8 0x05, 0x98 -#define TM6010_REQ05_R99_CFG_FIFO9 0x05, 0x99 -#define TM6010_REQ05_R91_CFG_FIFO10 0x05, 0x9a -#define TM6010_REQ05_R91_CFG_FIFO11 0x05, 0x9b -#define TM6010_REQ05_R91_CFG_FIFO12 0x05, 0x9c -#define TM6010_REQ05_R91_CFG_FIFO13 0x05, 0x9d -#define TM6010_REQ05_R91_CFG_FIFO14 0x05, 0x9e -#define TM6010_REQ05_R91_CFG_FIFO15 0x05, 0x9f -#define TM6010_REQ05_RA0_CTL_FIFO0 0x05, 0xa0 -#define TM6010_REQ05_RA1_CTL_FIFO1 0x05, 0xa1 -#define TM6010_REQ05_RA2_CTL_FIFO2 0x05, 0xa2 -#define TM6010_REQ05_RA3_CTL_FIFO3 0x05, 0xa3 -#define TM6010_REQ05_RA4_CTL_FIFO4 0x05, 0xa4 -#define TM6010_REQ05_RA5_CTL_FIFO5 0x05, 0xa5 -#define TM6010_REQ05_RA6_CTL_FIFO6 0x05, 0xa6 -#define TM6010_REQ05_RA7_CTL_FIFO7 0x05, 0xa7 -#define TM6010_REQ05_RA8_CTL_FIFO8 0x05, 0xa8 -#define TM6010_REQ05_RA9_CTL_FIFO9 0x05, 0xa9 -#define TM6010_REQ05_RA1_CTL_FIFO10 0x05, 0xaa -#define TM6010_REQ05_RA1_CTL_FIFO11 0x05, 0xab -#define TM6010_REQ05_RA1_CTL_FIFO12 0x05, 0xac -#define TM6010_REQ05_RA1_CTL_FIFO13 0x05, 0xad -#define TM6010_REQ05_RA1_CTL_FIFO14 0x05, 0xae -#define TM6010_REQ05_RA1_CTL_FIFO15 0x05, 0xaf -#define TM6010_REQ05_RB0_BC_LOW_FIFO0 0x05, 0xb0 -#define TM6010_REQ05_RB1_BC_LOW_FIFO1 0x05, 0xb1 -#define TM6010_REQ05_RB2_BC_LOW_FIFO2 0x05, 0xb2 -#define TM6010_REQ05_RB3_BC_LOW_FIFO3 0x05, 0xb3 -#define TM6010_REQ05_RB4_BC_LOW_FIFO4 0x05, 0xb4 -#define TM6010_REQ05_RB5_BC_LOW_FIFO5 0x05, 0xb5 -#define TM6010_REQ05_RB6_BC_LOW_FIFO6 0x05, 0xb6 -#define TM6010_REQ05_RB7_BC_LOW_FIFO7 0x05, 0xb7 -#define TM6010_REQ05_RB8_BC_LOW_FIFO8 0x05, 0xb8 -#define TM6010_REQ05_RB9_BC_LOW_FIFO9 0x05, 0xb9 -#define TM6010_REQ05_RB1_BC_LOW_FIFO10 0x05, 0xba -#define TM6010_REQ05_RB1_BC_LOW_FIFO11 0x05, 0xbb -#define TM6010_REQ05_RB1_BC_LOW_FIFO12 0x05, 0xbc -#define TM6010_REQ05_RB1_BC_LOW_FIFO13 0x05, 0xbd -#define TM6010_REQ05_RB1_BC_LOW_FIFO14 0x05, 0xbe -#define TM6010_REQ05_RB1_BC_LOW_FIFO15 0x05, 0xbf -#define TM6010_REQ05_RC0_DATA_FIFO0 0x05, 0xc0 -#define TM6010_REQ05_RC4_DATA_FIFO1 0x05, 0xc4 -#define TM6010_REQ05_RC8_DATA_FIFO2 0x05, 0xc8 -#define TM6010_REQ05_RCC_DATA_FIFO3 0x05, 0xcc -#define TM6010_REQ05_RD0_DATA_FIFO4 0x05, 0xd0 -#define TM6010_REQ05_RD4_DATA_FIFO5 0x05, 0xd4 -#define TM6010_REQ05_RD8_DATA_FIFO6 0x05, 0xd8 -#define TM6010_REQ05_RDC_DATA_FIFO7 0x05, 0xdc -#define TM6010_REQ05_RE0_DATA_FIFO8 0x05, 0xe0 -#define TM6010_REQ05_RE4_DATA_FIFO9 0x05, 0xe4 -#define TM6010_REQ05_RC4_DATA_FIFO10 0x05, 0xe8 -#define TM6010_REQ05_RC4_DATA_FIFO11 0x05, 0xec -#define TM6010_REQ05_RC4_DATA_FIFO12 0x05, 0xf0 -#define TM6010_REQ05_RC4_DATA_FIFO13 0x05, 0xf4 -#define TM6010_REQ05_RC4_DATA_FIFO14 0x05, 0xf8 -#define TM6010_REQ05_RC4_DATA_FIFO15 0x05, 0xfc - -/* Define TM6010 Audio decoder registers */ -/* This core available only in TM6010 */ -#define TM6010_REQ08_R00_A_VERSION 0x08, 0x00 -#define TM6010_REQ08_R01_A_INIT 0x08, 0x01 -#define TM6010_REQ08_R02_A_FIX_GAIN_CTRL 0x08, 0x02 -#define TM6010_REQ08_R03_A_AUTO_GAIN_CTRL 0x08, 0x03 -#define TM6010_REQ08_R04_A_SIF_AMP_CTRL 0x08, 0x04 -#define TM6010_REQ08_R05_A_STANDARD_MOD 0x08, 0x05 -#define TM6010_REQ08_R06_A_SOUND_MOD 0x08, 0x06 -#define TM6010_REQ08_R07_A_LEFT_VOL 0x08, 0x07 -#define TM6010_REQ08_R08_A_RIGHT_VOL 0x08, 0x08 -#define TM6010_REQ08_R09_A_MAIN_VOL 0x08, 0x09 -#define TM6010_REQ08_R0A_A_I2S_MOD 0x08, 0x0a -#define TM6010_REQ08_R0B_A_ASD_THRES1 0x08, 0x0b -#define TM6010_REQ08_R0C_A_ASD_THRES2 0x08, 0x0c -#define TM6010_REQ08_R0D_A_AMD_THRES 0x08, 0x0d -#define TM6010_REQ08_R0E_A_MONO_THRES1 0x08, 0x0e -#define TM6010_REQ08_R0F_A_MONO_THRES2 0x08, 0x0f -#define TM6010_REQ08_R10_A_MUTE_THRES1 0x08, 0x10 -#define TM6010_REQ08_R11_A_MUTE_THRES2 0x08, 0x11 -#define TM6010_REQ08_R12_A_AGC_U 0x08, 0x12 -#define TM6010_REQ08_R13_A_AGC_ERR_T 0x08, 0x13 -#define TM6010_REQ08_R14_A_AGC_GAIN_INIT 0x08, 0x14 -#define TM6010_REQ08_R15_A_AGC_STEP_THR 0x08, 0x15 -#define TM6010_REQ08_R16_A_AGC_GAIN_MAX 0x08, 0x16 -#define TM6010_REQ08_R17_A_AGC_GAIN_MIN 0x08, 0x17 -#define TM6010_REQ08_R18_A_TR_CTRL 0x08, 0x18 -#define TM6010_REQ08_R19_A_FH_2FH_GAIN 0x08, 0x19 -#define TM6010_REQ08_R1A_A_NICAM_SER_MAX 0x08, 0x1a -#define TM6010_REQ08_R1B_A_NICAM_SER_MIN 0x08, 0x1b -#define TM6010_REQ08_R1E_A_GAIN_DEEMPH_OUT 0x08, 0x1e -#define TM6010_REQ08_R1F_A_TEST_INTF_SEL 0x08, 0x1f -#define TM6010_REQ08_R20_A_TEST_PIN_SEL 0x08, 0x20 -#define TM6010_REQ08_R21_A_AGC_ERR 0x08, 0x21 -#define TM6010_REQ08_R22_A_AGC_GAIN 0x08, 0x22 -#define TM6010_REQ08_R23_A_NICAM_INFO 0x08, 0x23 -#define TM6010_REQ08_R24_A_SER 0x08, 0x24 -#define TM6010_REQ08_R25_A_C1_AMP 0x08, 0x25 -#define TM6010_REQ08_R26_A_C2_AMP 0x08, 0x26 -#define TM6010_REQ08_R27_A_NOISE_AMP 0x08, 0x27 -#define TM6010_REQ08_R28_A_AUDIO_MODE_RES 0x08, 0x28 - -/* Define TM6010 Video ADC registers */ -#define TM6010_REQ08_RE0_ADC_REF 0x08, 0xe0 -#define TM6010_REQ08_RE1_DAC_CLMP 0x08, 0xe1 -#define TM6010_REQ08_RE2_POWER_DOWN_CTRL1 0x08, 0xe2 -#define TM6010_REQ08_RE3_ADC_IN1_SEL 0x08, 0xe3 -#define TM6010_REQ08_RE4_ADC_IN2_SEL 0x08, 0xe4 -#define TM6010_REQ08_RE5_GAIN_PARAM 0x08, 0xe5 -#define TM6010_REQ08_RE6_POWER_DOWN_CTRL2 0x08, 0xe6 -#define TM6010_REQ08_RE7_REG_GAIN_Y 0x08, 0xe7 -#define TM6010_REQ08_RE8_REG_GAIN_C 0x08, 0xe8 -#define TM6010_REQ08_RE9_BIAS_CTRL 0x08, 0xe9 -#define TM6010_REQ08_REA_BUFF_DRV_CTRL 0x08, 0xea -#define TM6010_REQ08_REB_SIF_GAIN_CTRL 0x08, 0xeb -#define TM6010_REQ08_REC_REVERSE_YC_CTRL 0x08, 0xec -#define TM6010_REQ08_RED_GAIN_SEL 0x08, 0xed - -/* Define TM6010 Audio ADC registers */ -#define TM6010_REQ08_RF0_DAUDIO_INPUT_CONFIG 0x08, 0xf0 -#define TM6010_REQ08_RF1_AADC_POWER_DOWN 0x08, 0xf1 -#define TM6010_REQ08_RF2_LEFT_CHANNEL_VOL 0x08, 0xf2 -#define TM6010_REQ08_RF3_RIGHT_CHANNEL_VOL 0x08, 0xf3 diff --git a/drivers/staging/media/deprecated/tm6000/tm6000-stds.c b/drivers/staging/media/deprecated/tm6000/tm6000-stds.c deleted file mode 100644 index 858cb4f3a9ca..000000000000 --- a/drivers/staging/media/deprecated/tm6000/tm6000-stds.c +++ /dev/null @@ -1,623 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -// tm6000-stds.c - driver for TM5600/TM6000/TM6010 USB video capture devices -// -// Copyright (c) 2007 Mauro Carvalho Chehab - -#include -#include -#include "tm6000.h" -#include "tm6000-regs.h" - -static unsigned int tm6010_a_mode; -module_param(tm6010_a_mode, int, 0644); -MODULE_PARM_DESC(tm6010_a_mode, "set tm6010 sif audio mode"); - -struct tm6000_reg_settings { - unsigned char req; - unsigned char reg; - unsigned char value; -}; - - -struct tm6000_std_settings { - v4l2_std_id id; - struct tm6000_reg_settings *common; -}; - -static struct tm6000_reg_settings composite_pal_m[] = { - { TM6010_REQ07_R3F_RESET, 0x01 }, - { TM6010_REQ07_R00_VIDEO_CONTROL0, 0x04 }, - { TM6010_REQ07_R01_VIDEO_CONTROL1, 0x0e }, - { TM6010_REQ07_R02_VIDEO_CONTROL2, 0x5f }, - { TM6010_REQ07_R03_YC_SEP_CONTROL, 0x00 }, - { TM6010_REQ07_R07_OUTPUT_CONTROL, 0x31 }, - { TM6010_REQ07_R18_CHROMA_DTO_INCREMENT3, 0x1e }, - { TM6010_REQ07_R19_CHROMA_DTO_INCREMENT2, 0x83 }, - { TM6010_REQ07_R1A_CHROMA_DTO_INCREMENT1, 0x0a }, - { TM6010_REQ07_R1B_CHROMA_DTO_INCREMENT0, 0xe0 }, - { TM6010_REQ07_R1C_HSYNC_DTO_INCREMENT3, 0x1c }, - { TM6010_REQ07_R1D_HSYNC_DTO_INCREMENT2, 0xcc }, - { TM6010_REQ07_R1E_HSYNC_DTO_INCREMENT1, 0xcc }, - { TM6010_REQ07_R1F_HSYNC_DTO_INCREMENT0, 0xcd }, - { TM6010_REQ07_R2E_ACTIVE_VIDEO_HSTART, 0x88 }, - { TM6010_REQ07_R30_ACTIVE_VIDEO_VSTART, 0x20 }, - { TM6010_REQ07_R31_ACTIVE_VIDEO_VHIGHT, 0x61 }, - { TM6010_REQ07_R33_VSYNC_HLOCK_MAX, 0x0c }, - { TM6010_REQ07_R35_VSYNC_AGC_MAX, 0x1c }, - { TM6010_REQ07_R82_COMB_FILTER_CONFIG, 0x52 }, - { TM6010_REQ07_R83_CHROMA_LOCK_CONFIG, 0x6f }, - { TM6010_REQ07_R04_LUMA_HAGC_CONTROL, 0xdc }, - { TM6010_REQ07_R0D_CHROMA_KILL_LEVEL, 0x07 }, - { TM6010_REQ07_R3F_RESET, 0x00 }, - { 0, 0, 0 } -}; - -static struct tm6000_reg_settings composite_pal_nc[] = { - { TM6010_REQ07_R3F_RESET, 0x01 }, - { TM6010_REQ07_R00_VIDEO_CONTROL0, 0x36 }, - { TM6010_REQ07_R01_VIDEO_CONTROL1, 0x0e }, - { TM6010_REQ07_R02_VIDEO_CONTROL2, 0x5f }, - { TM6010_REQ07_R03_YC_SEP_CONTROL, 0x02 }, - { TM6010_REQ07_R07_OUTPUT_CONTROL, 0x31 }, - { TM6010_REQ07_R18_CHROMA_DTO_INCREMENT3, 0x1e }, - { TM6010_REQ07_R19_CHROMA_DTO_INCREMENT2, 0x91 }, - { TM6010_REQ07_R1A_CHROMA_DTO_INCREMENT1, 0x1f }, - { TM6010_REQ07_R1B_CHROMA_DTO_INCREMENT0, 0x0c }, - { TM6010_REQ07_R1C_HSYNC_DTO_INCREMENT3, 0x1c }, - { TM6010_REQ07_R1D_HSYNC_DTO_INCREMENT2, 0xcc }, - { TM6010_REQ07_R1E_HSYNC_DTO_INCREMENT1, 0xcc }, - { TM6010_REQ07_R1F_HSYNC_DTO_INCREMENT0, 0xcd }, - { TM6010_REQ07_R2E_ACTIVE_VIDEO_HSTART, 0x8c }, - { TM6010_REQ07_R30_ACTIVE_VIDEO_VSTART, 0x2c }, - { TM6010_REQ07_R31_ACTIVE_VIDEO_VHIGHT, 0xc1 }, - { TM6010_REQ07_R33_VSYNC_HLOCK_MAX, 0x0c }, - { TM6010_REQ07_R35_VSYNC_AGC_MAX, 0x1c }, - { TM6010_REQ07_R82_COMB_FILTER_CONFIG, 0x52 }, - { TM6010_REQ07_R83_CHROMA_LOCK_CONFIG, 0x6f }, - { TM6010_REQ07_R04_LUMA_HAGC_CONTROL, 0xdc }, - { TM6010_REQ07_R0D_CHROMA_KILL_LEVEL, 0x07 }, - { TM6010_REQ07_R3F_RESET, 0x00 }, - { 0, 0, 0 } -}; - -static struct tm6000_reg_settings composite_pal[] = { - { TM6010_REQ07_R3F_RESET, 0x01 }, - { TM6010_REQ07_R00_VIDEO_CONTROL0, 0x32 }, - { TM6010_REQ07_R01_VIDEO_CONTROL1, 0x0e }, - { TM6010_REQ07_R02_VIDEO_CONTROL2, 0x5f }, - { TM6010_REQ07_R03_YC_SEP_CONTROL, 0x02 }, - { TM6010_REQ07_R07_OUTPUT_CONTROL, 0x31 }, - { TM6010_REQ07_R18_CHROMA_DTO_INCREMENT3, 0x25 }, - { TM6010_REQ07_R19_CHROMA_DTO_INCREMENT2, 0xd5 }, - { TM6010_REQ07_R1A_CHROMA_DTO_INCREMENT1, 0x63 }, - { TM6010_REQ07_R1B_CHROMA_DTO_INCREMENT0, 0x50 }, - { TM6010_REQ07_R1C_HSYNC_DTO_INCREMENT3, 0x1c }, - { TM6010_REQ07_R1D_HSYNC_DTO_INCREMENT2, 0xcc }, - { TM6010_REQ07_R1E_HSYNC_DTO_INCREMENT1, 0xcc }, - { TM6010_REQ07_R1F_HSYNC_DTO_INCREMENT0, 0xcd }, - { TM6010_REQ07_R2E_ACTIVE_VIDEO_HSTART, 0x8c }, - { TM6010_REQ07_R30_ACTIVE_VIDEO_VSTART, 0x2c }, - { TM6010_REQ07_R31_ACTIVE_VIDEO_VHIGHT, 0xc1 }, - { TM6010_REQ07_R33_VSYNC_HLOCK_MAX, 0x0c }, - { TM6010_REQ07_R35_VSYNC_AGC_MAX, 0x1c }, - { TM6010_REQ07_R82_COMB_FILTER_CONFIG, 0x52 }, - { TM6010_REQ07_R83_CHROMA_LOCK_CONFIG, 0x6f }, - { TM6010_REQ07_R04_LUMA_HAGC_CONTROL, 0xdc }, - { TM6010_REQ07_R0D_CHROMA_KILL_LEVEL, 0x07 }, - { TM6010_REQ07_R3F_RESET, 0x00 }, - { 0, 0, 0 } -}; - -static struct tm6000_reg_settings composite_secam[] = { - { TM6010_REQ07_R3F_RESET, 0x01 }, - { TM6010_REQ07_R00_VIDEO_CONTROL0, 0x38 }, - { TM6010_REQ07_R01_VIDEO_CONTROL1, 0x0e }, - { TM6010_REQ07_R02_VIDEO_CONTROL2, 0x5f }, - { TM6010_REQ07_R03_YC_SEP_CONTROL, 0x02 }, - { TM6010_REQ07_R07_OUTPUT_CONTROL, 0x31 }, - { TM6010_REQ07_R18_CHROMA_DTO_INCREMENT3, 0x24 }, - { TM6010_REQ07_R19_CHROMA_DTO_INCREMENT2, 0x92 }, - { TM6010_REQ07_R1A_CHROMA_DTO_INCREMENT1, 0xe8 }, - { TM6010_REQ07_R1B_CHROMA_DTO_INCREMENT0, 0xed }, - { TM6010_REQ07_R1C_HSYNC_DTO_INCREMENT3, 0x1c }, - { TM6010_REQ07_R1D_HSYNC_DTO_INCREMENT2, 0xcc }, - { TM6010_REQ07_R1E_HSYNC_DTO_INCREMENT1, 0xcc }, - { TM6010_REQ07_R1F_HSYNC_DTO_INCREMENT0, 0xcd }, - { TM6010_REQ07_R2E_ACTIVE_VIDEO_HSTART, 0x8c }, - { TM6010_REQ07_R30_ACTIVE_VIDEO_VSTART, 0x2c }, - { TM6010_REQ07_R31_ACTIVE_VIDEO_VHIGHT, 0xc1 }, - { TM6010_REQ07_R33_VSYNC_HLOCK_MAX, 0x2c }, - { TM6010_REQ07_R35_VSYNC_AGC_MAX, 0x18 }, - { TM6010_REQ07_R82_COMB_FILTER_CONFIG, 0x42 }, - { TM6010_REQ07_R83_CHROMA_LOCK_CONFIG, 0xff }, - { TM6010_REQ07_R0D_CHROMA_KILL_LEVEL, 0x07 }, - { TM6010_REQ07_R3F_RESET, 0x00 }, - { 0, 0, 0 } -}; - -static struct tm6000_reg_settings composite_ntsc[] = { - { TM6010_REQ07_R3F_RESET, 0x01 }, - { TM6010_REQ07_R00_VIDEO_CONTROL0, 0x00 }, - { TM6010_REQ07_R01_VIDEO_CONTROL1, 0x0f }, - { TM6010_REQ07_R02_VIDEO_CONTROL2, 0x5f }, - { TM6010_REQ07_R03_YC_SEP_CONTROL, 0x00 }, - { TM6010_REQ07_R07_OUTPUT_CONTROL, 0x31 }, - { TM6010_REQ07_R18_CHROMA_DTO_INCREMENT3, 0x1e }, - { TM6010_REQ07_R19_CHROMA_DTO_INCREMENT2, 0x8b }, - { TM6010_REQ07_R1A_CHROMA_DTO_INCREMENT1, 0xa2 }, - { TM6010_REQ07_R1B_CHROMA_DTO_INCREMENT0, 0xe9 }, - { TM6010_REQ07_R1C_HSYNC_DTO_INCREMENT3, 0x1c }, - { TM6010_REQ07_R1D_HSYNC_DTO_INCREMENT2, 0xcc }, - { TM6010_REQ07_R1E_HSYNC_DTO_INCREMENT1, 0xcc }, - { TM6010_REQ07_R1F_HSYNC_DTO_INCREMENT0, 0xcd }, - { TM6010_REQ07_R2E_ACTIVE_VIDEO_HSTART, 0x88 }, - { TM6010_REQ07_R30_ACTIVE_VIDEO_VSTART, 0x22 }, - { TM6010_REQ07_R31_ACTIVE_VIDEO_VHIGHT, 0x61 }, - { TM6010_REQ07_R33_VSYNC_HLOCK_MAX, 0x1c }, - { TM6010_REQ07_R35_VSYNC_AGC_MAX, 0x1c }, - { TM6010_REQ07_R82_COMB_FILTER_CONFIG, 0x42 }, - { TM6010_REQ07_R83_CHROMA_LOCK_CONFIG, 0x6f }, - { TM6010_REQ07_R04_LUMA_HAGC_CONTROL, 0xdd }, - { TM6010_REQ07_R0D_CHROMA_KILL_LEVEL, 0x07 }, - { TM6010_REQ07_R3F_RESET, 0x00 }, - { 0, 0, 0 } -}; - -static struct tm6000_std_settings composite_stds[] = { - { .id = V4L2_STD_PAL_M, .common = composite_pal_m, }, - { .id = V4L2_STD_PAL_Nc, .common = composite_pal_nc, }, - { .id = V4L2_STD_PAL, .common = composite_pal, }, - { .id = V4L2_STD_SECAM, .common = composite_secam, }, - { .id = V4L2_STD_NTSC, .common = composite_ntsc, }, -}; - -static struct tm6000_reg_settings svideo_pal_m[] = { - { TM6010_REQ07_R3F_RESET, 0x01 }, - { TM6010_REQ07_R00_VIDEO_CONTROL0, 0x05 }, - { TM6010_REQ07_R01_VIDEO_CONTROL1, 0x0e }, - { TM6010_REQ07_R02_VIDEO_CONTROL2, 0x5f }, - { TM6010_REQ07_R03_YC_SEP_CONTROL, 0x04 }, - { TM6010_REQ07_R07_OUTPUT_CONTROL, 0x31 }, - { TM6010_REQ07_R18_CHROMA_DTO_INCREMENT3, 0x1e }, - { TM6010_REQ07_R19_CHROMA_DTO_INCREMENT2, 0x83 }, - { TM6010_REQ07_R1A_CHROMA_DTO_INCREMENT1, 0x0a }, - { TM6010_REQ07_R1B_CHROMA_DTO_INCREMENT0, 0xe0 }, - { TM6010_REQ07_R1C_HSYNC_DTO_INCREMENT3, 0x1c }, - { TM6010_REQ07_R1D_HSYNC_DTO_INCREMENT2, 0xcc }, - { TM6010_REQ07_R1E_HSYNC_DTO_INCREMENT1, 0xcc }, - { TM6010_REQ07_R1F_HSYNC_DTO_INCREMENT0, 0xcd }, - { TM6010_REQ07_R2E_ACTIVE_VIDEO_HSTART, 0x88 }, - { TM6010_REQ07_R30_ACTIVE_VIDEO_VSTART, 0x22 }, - { TM6010_REQ07_R31_ACTIVE_VIDEO_VHIGHT, 0x61 }, - { TM6010_REQ07_R33_VSYNC_HLOCK_MAX, 0x0c }, - { TM6010_REQ07_R35_VSYNC_AGC_MAX, 0x1c }, - { TM6010_REQ07_R82_COMB_FILTER_CONFIG, 0x52 }, - { TM6010_REQ07_R83_CHROMA_LOCK_CONFIG, 0x6f }, - { TM6010_REQ07_R04_LUMA_HAGC_CONTROL, 0xdc }, - { TM6010_REQ07_R0D_CHROMA_KILL_LEVEL, 0x07 }, - { TM6010_REQ07_R3F_RESET, 0x00 }, - { 0, 0, 0 } -}; - -static struct tm6000_reg_settings svideo_pal_nc[] = { - { TM6010_REQ07_R3F_RESET, 0x01 }, - { TM6010_REQ07_R00_VIDEO_CONTROL0, 0x37 }, - { TM6010_REQ07_R01_VIDEO_CONTROL1, 0x0e }, - { TM6010_REQ07_R02_VIDEO_CONTROL2, 0x5f }, - { TM6010_REQ07_R03_YC_SEP_CONTROL, 0x04 }, - { TM6010_REQ07_R07_OUTPUT_CONTROL, 0x31 }, - { TM6010_REQ07_R18_CHROMA_DTO_INCREMENT3, 0x1e }, - { TM6010_REQ07_R19_CHROMA_DTO_INCREMENT2, 0x91 }, - { TM6010_REQ07_R1A_CHROMA_DTO_INCREMENT1, 0x1f }, - { TM6010_REQ07_R1B_CHROMA_DTO_INCREMENT0, 0x0c }, - { TM6010_REQ07_R1C_HSYNC_DTO_INCREMENT3, 0x1c }, - { TM6010_REQ07_R1D_HSYNC_DTO_INCREMENT2, 0xcc }, - { TM6010_REQ07_R1E_HSYNC_DTO_INCREMENT1, 0xcc }, - { TM6010_REQ07_R1F_HSYNC_DTO_INCREMENT0, 0xcd }, - { TM6010_REQ07_R2E_ACTIVE_VIDEO_HSTART, 0x88 }, - { TM6010_REQ07_R30_ACTIVE_VIDEO_VSTART, 0x22 }, - { TM6010_REQ07_R31_ACTIVE_VIDEO_VHIGHT, 0xc1 }, - { TM6010_REQ07_R33_VSYNC_HLOCK_MAX, 0x0c }, - { TM6010_REQ07_R35_VSYNC_AGC_MAX, 0x1c }, - { TM6010_REQ07_R82_COMB_FILTER_CONFIG, 0x52 }, - { TM6010_REQ07_R83_CHROMA_LOCK_CONFIG, 0x6f }, - { TM6010_REQ07_R04_LUMA_HAGC_CONTROL, 0xdc }, - { TM6010_REQ07_R0D_CHROMA_KILL_LEVEL, 0x07 }, - { TM6010_REQ07_R3F_RESET, 0x00 }, - { 0, 0, 0 } -}; - -static struct tm6000_reg_settings svideo_pal[] = { - { TM6010_REQ07_R3F_RESET, 0x01 }, - { TM6010_REQ07_R00_VIDEO_CONTROL0, 0x33 }, - { TM6010_REQ07_R01_VIDEO_CONTROL1, 0x0e }, - { TM6010_REQ07_R02_VIDEO_CONTROL2, 0x5f }, - { TM6010_REQ07_R03_YC_SEP_CONTROL, 0x04 }, - { TM6010_REQ07_R07_OUTPUT_CONTROL, 0x30 }, - { TM6010_REQ07_R18_CHROMA_DTO_INCREMENT3, 0x25 }, - { TM6010_REQ07_R19_CHROMA_DTO_INCREMENT2, 0xd5 }, - { TM6010_REQ07_R1A_CHROMA_DTO_INCREMENT1, 0x63 }, - { TM6010_REQ07_R1B_CHROMA_DTO_INCREMENT0, 0x50 }, - { TM6010_REQ07_R1C_HSYNC_DTO_INCREMENT3, 0x1c }, - { TM6010_REQ07_R1D_HSYNC_DTO_INCREMENT2, 0xcc }, - { TM6010_REQ07_R1E_HSYNC_DTO_INCREMENT1, 0xcc }, - { TM6010_REQ07_R1F_HSYNC_DTO_INCREMENT0, 0xcd }, - { TM6010_REQ07_R2E_ACTIVE_VIDEO_HSTART, 0x8c }, - { TM6010_REQ07_R30_ACTIVE_VIDEO_VSTART, 0x2a }, - { TM6010_REQ07_R31_ACTIVE_VIDEO_VHIGHT, 0xc1 }, - { TM6010_REQ07_R33_VSYNC_HLOCK_MAX, 0x0c }, - { TM6010_REQ07_R35_VSYNC_AGC_MAX, 0x1c }, - { TM6010_REQ07_R82_COMB_FILTER_CONFIG, 0x52 }, - { TM6010_REQ07_R83_CHROMA_LOCK_CONFIG, 0x6f }, - { TM6010_REQ07_R04_LUMA_HAGC_CONTROL, 0xdc }, - { TM6010_REQ07_R0D_CHROMA_KILL_LEVEL, 0x07 }, - { TM6010_REQ07_R3F_RESET, 0x00 }, - { 0, 0, 0 } -}; - -static struct tm6000_reg_settings svideo_secam[] = { - { TM6010_REQ07_R3F_RESET, 0x01 }, - { TM6010_REQ07_R00_VIDEO_CONTROL0, 0x39 }, - { TM6010_REQ07_R01_VIDEO_CONTROL1, 0x0e }, - { TM6010_REQ07_R02_VIDEO_CONTROL2, 0x5f }, - { TM6010_REQ07_R03_YC_SEP_CONTROL, 0x03 }, - { TM6010_REQ07_R07_OUTPUT_CONTROL, 0x31 }, - { TM6010_REQ07_R18_CHROMA_DTO_INCREMENT3, 0x24 }, - { TM6010_REQ07_R19_CHROMA_DTO_INCREMENT2, 0x92 }, - { TM6010_REQ07_R1A_CHROMA_DTO_INCREMENT1, 0xe8 }, - { TM6010_REQ07_R1B_CHROMA_DTO_INCREMENT0, 0xed }, - { TM6010_REQ07_R1C_HSYNC_DTO_INCREMENT3, 0x1c }, - { TM6010_REQ07_R1D_HSYNC_DTO_INCREMENT2, 0xcc }, - { TM6010_REQ07_R1E_HSYNC_DTO_INCREMENT1, 0xcc }, - { TM6010_REQ07_R1F_HSYNC_DTO_INCREMENT0, 0xcd }, - { TM6010_REQ07_R2E_ACTIVE_VIDEO_HSTART, 0x8c }, - { TM6010_REQ07_R30_ACTIVE_VIDEO_VSTART, 0x2a }, - { TM6010_REQ07_R31_ACTIVE_VIDEO_VHIGHT, 0xc1 }, - { TM6010_REQ07_R33_VSYNC_HLOCK_MAX, 0x2c }, - { TM6010_REQ07_R35_VSYNC_AGC_MAX, 0x18 }, - { TM6010_REQ07_R82_COMB_FILTER_CONFIG, 0x42 }, - { TM6010_REQ07_R83_CHROMA_LOCK_CONFIG, 0xff }, - { TM6010_REQ07_R0D_CHROMA_KILL_LEVEL, 0x07 }, - { TM6010_REQ07_R3F_RESET, 0x00 }, - { 0, 0, 0 } -}; - -static struct tm6000_reg_settings svideo_ntsc[] = { - { TM6010_REQ07_R3F_RESET, 0x01 }, - { TM6010_REQ07_R00_VIDEO_CONTROL0, 0x01 }, - { TM6010_REQ07_R01_VIDEO_CONTROL1, 0x0f }, - { TM6010_REQ07_R02_VIDEO_CONTROL2, 0x5f }, - { TM6010_REQ07_R03_YC_SEP_CONTROL, 0x03 }, - { TM6010_REQ07_R07_OUTPUT_CONTROL, 0x30 }, - { TM6010_REQ07_R17_HLOOP_MAXSTATE, 0x8b }, - { TM6010_REQ07_R18_CHROMA_DTO_INCREMENT3, 0x1e }, - { TM6010_REQ07_R19_CHROMA_DTO_INCREMENT2, 0x8b }, - { TM6010_REQ07_R1A_CHROMA_DTO_INCREMENT1, 0xa2 }, - { TM6010_REQ07_R1B_CHROMA_DTO_INCREMENT0, 0xe9 }, - { TM6010_REQ07_R1C_HSYNC_DTO_INCREMENT3, 0x1c }, - { TM6010_REQ07_R1D_HSYNC_DTO_INCREMENT2, 0xcc }, - { TM6010_REQ07_R1E_HSYNC_DTO_INCREMENT1, 0xcc }, - { TM6010_REQ07_R1F_HSYNC_DTO_INCREMENT0, 0xcd }, - { TM6010_REQ07_R2E_ACTIVE_VIDEO_HSTART, 0x88 }, - { TM6010_REQ07_R30_ACTIVE_VIDEO_VSTART, 0x22 }, - { TM6010_REQ07_R31_ACTIVE_VIDEO_VHIGHT, 0x61 }, - { TM6010_REQ07_R33_VSYNC_HLOCK_MAX, 0x1c }, - { TM6010_REQ07_R35_VSYNC_AGC_MAX, 0x1c }, - { TM6010_REQ07_R82_COMB_FILTER_CONFIG, 0x42 }, - { TM6010_REQ07_R83_CHROMA_LOCK_CONFIG, 0x6f }, - { TM6010_REQ07_R04_LUMA_HAGC_CONTROL, 0xdd }, - { TM6010_REQ07_R0D_CHROMA_KILL_LEVEL, 0x07 }, - { TM6010_REQ07_R3F_RESET, 0x00 }, - { 0, 0, 0 } -}; - -static struct tm6000_std_settings svideo_stds[] = { - { .id = V4L2_STD_PAL_M, .common = svideo_pal_m, }, - { .id = V4L2_STD_PAL_Nc, .common = svideo_pal_nc, }, - { .id = V4L2_STD_PAL, .common = svideo_pal, }, - { .id = V4L2_STD_SECAM, .common = svideo_secam, }, - { .id = V4L2_STD_NTSC, .common = svideo_ntsc, }, -}; - -static int tm6000_set_audio_std(struct tm6000_core *dev) -{ - uint8_t areg_02 = 0x04; /* GC1 Fixed gain 0dB */ - uint8_t areg_05 = 0x01; /* Auto 4.5 = M Japan, Auto 6.5 = DK */ - uint8_t areg_06 = 0x02; /* Auto de-emphasis, manual channel mode */ - - if (dev->radio) { - tm6000_set_reg(dev, TM6010_REQ08_R01_A_INIT, 0x00); - tm6000_set_reg(dev, TM6010_REQ08_R02_A_FIX_GAIN_CTRL, 0x04); - tm6000_set_reg(dev, TM6010_REQ08_R03_A_AUTO_GAIN_CTRL, 0x00); - tm6000_set_reg(dev, TM6010_REQ08_R04_A_SIF_AMP_CTRL, 0x80); - tm6000_set_reg(dev, TM6010_REQ08_R05_A_STANDARD_MOD, 0x0c); - /* set mono or stereo */ - if (dev->amode == V4L2_TUNER_MODE_MONO) - tm6000_set_reg(dev, TM6010_REQ08_R06_A_SOUND_MOD, 0x00); - else if (dev->amode == V4L2_TUNER_MODE_STEREO) - tm6000_set_reg(dev, TM6010_REQ08_R06_A_SOUND_MOD, 0x02); - tm6000_set_reg(dev, TM6010_REQ08_R09_A_MAIN_VOL, 0x18); - tm6000_set_reg(dev, TM6010_REQ08_R0C_A_ASD_THRES2, 0x0a); - tm6000_set_reg(dev, TM6010_REQ08_R0D_A_AMD_THRES, 0x40); - tm6000_set_reg(dev, TM6010_REQ08_RF1_AADC_POWER_DOWN, 0xfe); - tm6000_set_reg(dev, TM6010_REQ08_R1E_A_GAIN_DEEMPH_OUT, 0x13); - tm6000_set_reg(dev, TM6010_REQ08_R01_A_INIT, 0x80); - tm6000_set_reg(dev, TM6010_REQ07_RFE_POWER_DOWN, 0xff); - return 0; - } - - /* - * STD/MN shouldn't be affected by tm6010_a_mode, as there's just one - * audio standard for each V4L2_STD type. - */ - if ((dev->norm & V4L2_STD_NTSC) == V4L2_STD_NTSC_M_KR) { - areg_05 |= 0x04; - } else if ((dev->norm & V4L2_STD_NTSC) == V4L2_STD_NTSC_M_JP) { - areg_05 |= 0x43; - } else if (dev->norm & V4L2_STD_MN) { - areg_05 |= 0x22; - } else switch (tm6010_a_mode) { - /* auto */ - case 0: - if ((dev->norm & V4L2_STD_SECAM) == V4L2_STD_SECAM_L) - areg_05 |= 0x00; - else /* Other PAL/SECAM standards */ - areg_05 |= 0x10; - break; - /* A2 */ - case 1: - if (dev->norm & V4L2_STD_DK) - areg_05 = 0x09; - else - areg_05 = 0x05; - break; - /* NICAM */ - case 2: - if (dev->norm & V4L2_STD_DK) { - areg_05 = 0x06; - } else if (dev->norm & V4L2_STD_PAL_I) { - areg_05 = 0x08; - } else if (dev->norm & V4L2_STD_SECAM_L) { - areg_05 = 0x0a; - areg_02 = 0x02; - } else { - areg_05 = 0x07; - } - break; - /* other */ - case 3: - if (dev->norm & V4L2_STD_DK) { - areg_05 = 0x0b; - } else { - areg_05 = 0x02; - } - break; - } - - tm6000_set_reg(dev, TM6010_REQ08_R01_A_INIT, 0x00); - tm6000_set_reg(dev, TM6010_REQ08_R02_A_FIX_GAIN_CTRL, areg_02); - tm6000_set_reg(dev, TM6010_REQ08_R03_A_AUTO_GAIN_CTRL, 0x00); - tm6000_set_reg(dev, TM6010_REQ08_R04_A_SIF_AMP_CTRL, 0xa0); - tm6000_set_reg(dev, TM6010_REQ08_R05_A_STANDARD_MOD, areg_05); - tm6000_set_reg(dev, TM6010_REQ08_R06_A_SOUND_MOD, areg_06); - tm6000_set_reg(dev, TM6010_REQ08_R07_A_LEFT_VOL, 0x00); - tm6000_set_reg(dev, TM6010_REQ08_R08_A_RIGHT_VOL, 0x00); - tm6000_set_reg(dev, TM6010_REQ08_R09_A_MAIN_VOL, 0x08); - tm6000_set_reg(dev, TM6010_REQ08_R0A_A_I2S_MOD, 0x91); - tm6000_set_reg(dev, TM6010_REQ08_R0B_A_ASD_THRES1, 0x20); - tm6000_set_reg(dev, TM6010_REQ08_R0C_A_ASD_THRES2, 0x12); - tm6000_set_reg(dev, TM6010_REQ08_R0D_A_AMD_THRES, 0x20); - tm6000_set_reg(dev, TM6010_REQ08_R0E_A_MONO_THRES1, 0xf0); - tm6000_set_reg(dev, TM6010_REQ08_R0F_A_MONO_THRES2, 0x80); - tm6000_set_reg(dev, TM6010_REQ08_R10_A_MUTE_THRES1, 0xc0); - tm6000_set_reg(dev, TM6010_REQ08_R11_A_MUTE_THRES2, 0x80); - tm6000_set_reg(dev, TM6010_REQ08_R12_A_AGC_U, 0x12); - tm6000_set_reg(dev, TM6010_REQ08_R13_A_AGC_ERR_T, 0xfe); - tm6000_set_reg(dev, TM6010_REQ08_R14_A_AGC_GAIN_INIT, 0x20); - tm6000_set_reg(dev, TM6010_REQ08_R15_A_AGC_STEP_THR, 0x14); - tm6000_set_reg(dev, TM6010_REQ08_R16_A_AGC_GAIN_MAX, 0xfe); - tm6000_set_reg(dev, TM6010_REQ08_R17_A_AGC_GAIN_MIN, 0x01); - tm6000_set_reg(dev, TM6010_REQ08_R18_A_TR_CTRL, 0xa0); - tm6000_set_reg(dev, TM6010_REQ08_R19_A_FH_2FH_GAIN, 0x32); - tm6000_set_reg(dev, TM6010_REQ08_R1A_A_NICAM_SER_MAX, 0x64); - tm6000_set_reg(dev, TM6010_REQ08_R1B_A_NICAM_SER_MIN, 0x20); - tm6000_set_reg(dev, REQ_08_SET_GET_AVREG_BIT, 0x1c, 0x00); - tm6000_set_reg(dev, REQ_08_SET_GET_AVREG_BIT, 0x1d, 0x00); - tm6000_set_reg(dev, TM6010_REQ08_R1E_A_GAIN_DEEMPH_OUT, 0x13); - tm6000_set_reg(dev, TM6010_REQ08_R1F_A_TEST_INTF_SEL, 0x00); - tm6000_set_reg(dev, TM6010_REQ08_R20_A_TEST_PIN_SEL, 0x00); - tm6000_set_reg(dev, TM6010_REQ08_R01_A_INIT, 0x80); - - return 0; -} - -void tm6000_get_std_res(struct tm6000_core *dev) -{ - /* Currently, those are the only supported resoltions */ - if (dev->norm & V4L2_STD_525_60) - dev->height = 480; - else - dev->height = 576; - - dev->width = 720; -} - -static int tm6000_load_std(struct tm6000_core *dev, struct tm6000_reg_settings *set) -{ - int i, rc; - - /* Load board's initialization table */ - for (i = 0; set[i].req; i++) { - rc = tm6000_set_reg(dev, set[i].req, set[i].reg, set[i].value); - if (rc < 0) { - printk(KERN_ERR "Error %i while setting req %d, reg %d to value %d\n", - rc, set[i].req, set[i].reg, set[i].value); - return rc; - } - } - - return 0; -} - -int tm6000_set_standard(struct tm6000_core *dev) -{ - struct tm6000_input *input; - int i, rc = 0; - u8 reg_07_fe = 0x8a; - u8 reg_08_f1 = 0xfc; - u8 reg_08_e2 = 0xf0; - u8 reg_08_e6 = 0x0f; - - tm6000_get_std_res(dev); - - if (!dev->radio) - input = &dev->vinput[dev->input]; - else - input = &dev->rinput; - - if (dev->dev_type == TM6010) { - switch (input->vmux) { - case TM6000_VMUX_VIDEO_A: - tm6000_set_reg(dev, TM6010_REQ08_RE3_ADC_IN1_SEL, 0xf4); - tm6000_set_reg(dev, TM6010_REQ08_REA_BUFF_DRV_CTRL, 0xf1); - tm6000_set_reg(dev, TM6010_REQ08_REB_SIF_GAIN_CTRL, 0xe0); - tm6000_set_reg(dev, TM6010_REQ08_REC_REVERSE_YC_CTRL, 0xc2); - tm6000_set_reg(dev, TM6010_REQ08_RED_GAIN_SEL, 0xe8); - reg_07_fe |= 0x01; - break; - case TM6000_VMUX_VIDEO_B: - tm6000_set_reg(dev, TM6010_REQ08_RE3_ADC_IN1_SEL, 0xf8); - tm6000_set_reg(dev, TM6010_REQ08_REA_BUFF_DRV_CTRL, 0xf1); - tm6000_set_reg(dev, TM6010_REQ08_REB_SIF_GAIN_CTRL, 0xe0); - tm6000_set_reg(dev, TM6010_REQ08_REC_REVERSE_YC_CTRL, 0xc2); - tm6000_set_reg(dev, TM6010_REQ08_RED_GAIN_SEL, 0xe8); - reg_07_fe |= 0x01; - break; - case TM6000_VMUX_VIDEO_AB: - tm6000_set_reg(dev, TM6010_REQ08_RE3_ADC_IN1_SEL, 0xfc); - tm6000_set_reg(dev, TM6010_REQ08_RE4_ADC_IN2_SEL, 0xf8); - reg_08_e6 = 0x00; - tm6000_set_reg(dev, TM6010_REQ08_REA_BUFF_DRV_CTRL, 0xf2); - tm6000_set_reg(dev, TM6010_REQ08_REB_SIF_GAIN_CTRL, 0xf0); - tm6000_set_reg(dev, TM6010_REQ08_REC_REVERSE_YC_CTRL, 0xc2); - tm6000_set_reg(dev, TM6010_REQ08_RED_GAIN_SEL, 0xe0); - break; - default: - break; - } - switch (input->amux) { - case TM6000_AMUX_ADC1: - tm6000_set_reg_mask(dev, TM6010_REQ08_RF0_DAUDIO_INPUT_CONFIG, - 0x00, 0x0f); - /* Mux overflow workaround */ - tm6000_set_reg_mask(dev, TM6010_REQ07_R07_OUTPUT_CONTROL, - 0x10, 0xf0); - break; - case TM6000_AMUX_ADC2: - tm6000_set_reg_mask(dev, TM6010_REQ08_RF0_DAUDIO_INPUT_CONFIG, - 0x08, 0x0f); - /* Mux overflow workaround */ - tm6000_set_reg_mask(dev, TM6010_REQ07_R07_OUTPUT_CONTROL, - 0x10, 0xf0); - break; - case TM6000_AMUX_SIF1: - reg_08_e2 |= 0x02; - reg_08_e6 = 0x08; - reg_07_fe |= 0x40; - reg_08_f1 |= 0x02; - tm6000_set_reg(dev, TM6010_REQ08_RE4_ADC_IN2_SEL, 0xf3); - tm6000_set_reg_mask(dev, TM6010_REQ08_RF0_DAUDIO_INPUT_CONFIG, - 0x02, 0x0f); - /* Mux overflow workaround */ - tm6000_set_reg_mask(dev, TM6010_REQ07_R07_OUTPUT_CONTROL, - 0x30, 0xf0); - break; - case TM6000_AMUX_SIF2: - reg_08_e2 |= 0x02; - reg_08_e6 = 0x08; - reg_07_fe |= 0x40; - reg_08_f1 |= 0x02; - tm6000_set_reg(dev, TM6010_REQ08_RE4_ADC_IN2_SEL, 0xf7); - tm6000_set_reg_mask(dev, TM6010_REQ08_RF0_DAUDIO_INPUT_CONFIG, - 0x02, 0x0f); - /* Mux overflow workaround */ - tm6000_set_reg_mask(dev, TM6010_REQ07_R07_OUTPUT_CONTROL, - 0x30, 0xf0); - break; - default: - break; - } - tm6000_set_reg(dev, TM6010_REQ08_RE2_POWER_DOWN_CTRL1, reg_08_e2); - tm6000_set_reg(dev, TM6010_REQ08_RE6_POWER_DOWN_CTRL2, reg_08_e6); - tm6000_set_reg(dev, TM6010_REQ08_RF1_AADC_POWER_DOWN, reg_08_f1); - tm6000_set_reg(dev, TM6010_REQ07_RFE_POWER_DOWN, reg_07_fe); - } else { - switch (input->vmux) { - case TM6000_VMUX_VIDEO_A: - tm6000_set_reg(dev, TM6000_REQ07_RE3_VADC_INP_LPF_SEL1, 0x10); - tm6000_set_reg(dev, TM6000_REQ07_RE5_VADC_INP_LPF_SEL2, 0x00); - tm6000_set_reg(dev, TM6000_REQ07_RE8_VADC_PWDOWN_CTL, 0x0f); - tm6000_set_reg(dev, - REQ_03_SET_GET_MCU_PIN, input->v_gpio, 0); - break; - case TM6000_VMUX_VIDEO_B: - tm6000_set_reg(dev, TM6000_REQ07_RE3_VADC_INP_LPF_SEL1, 0x00); - tm6000_set_reg(dev, TM6000_REQ07_RE5_VADC_INP_LPF_SEL2, 0x00); - tm6000_set_reg(dev, TM6000_REQ07_RE8_VADC_PWDOWN_CTL, 0x0f); - tm6000_set_reg(dev, - REQ_03_SET_GET_MCU_PIN, input->v_gpio, 0); - break; - case TM6000_VMUX_VIDEO_AB: - tm6000_set_reg(dev, TM6000_REQ07_RE3_VADC_INP_LPF_SEL1, 0x10); - tm6000_set_reg(dev, TM6000_REQ07_RE5_VADC_INP_LPF_SEL2, 0x10); - tm6000_set_reg(dev, TM6000_REQ07_RE8_VADC_PWDOWN_CTL, 0x00); - tm6000_set_reg(dev, - REQ_03_SET_GET_MCU_PIN, input->v_gpio, 1); - break; - default: - break; - } - switch (input->amux) { - case TM6000_AMUX_ADC1: - tm6000_set_reg_mask(dev, - TM6000_REQ07_REB_VADC_AADC_MODE, 0x00, 0x0f); - break; - case TM6000_AMUX_ADC2: - tm6000_set_reg_mask(dev, - TM6000_REQ07_REB_VADC_AADC_MODE, 0x04, 0x0f); - break; - default: - break; - } - } - if (input->type == TM6000_INPUT_SVIDEO) { - for (i = 0; i < ARRAY_SIZE(svideo_stds); i++) { - if (dev->norm & svideo_stds[i].id) { - rc = tm6000_load_std(dev, svideo_stds[i].common); - goto ret; - } - } - return -EINVAL; - } else { - for (i = 0; i < ARRAY_SIZE(composite_stds); i++) { - if (dev->norm & composite_stds[i].id) { - rc = tm6000_load_std(dev, composite_stds[i].common); - goto ret; - } - } - return -EINVAL; - } - -ret: - if (rc < 0) - return rc; - - if ((dev->dev_type == TM6010) && - ((input->amux == TM6000_AMUX_SIF1) || - (input->amux == TM6000_AMUX_SIF2))) - tm6000_set_audio_std(dev); - - msleep(40); - - return 0; -} diff --git a/drivers/staging/media/deprecated/tm6000/tm6000-usb-isoc.h b/drivers/staging/media/deprecated/tm6000/tm6000-usb-isoc.h deleted file mode 100644 index e3c6933f854d..000000000000 --- a/drivers/staging/media/deprecated/tm6000/tm6000-usb-isoc.h +++ /dev/null @@ -1,38 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -/* - * tm6000-buf.c - driver for TM5600/TM6000/TM6010 USB video capture devices - * - * Copyright (c) 2006-2007 Mauro Carvalho Chehab - */ - -#include - -#define TM6000_URB_MSG_LEN 180 - -struct usb_isoc_ctl { - /* max packet size of isoc transaction */ - int max_pkt_size; - - /* number of allocated urbs */ - int num_bufs; - - /* urb for isoc transfers */ - struct urb **urb; - - /* transfer buffers for isoc transfer */ - char **transfer_buffer; - - /* Last buffer command and region */ - u8 cmd; - int pos, size, pktsize; - - /* Last field: ODD or EVEN? */ - int vfield, field; - - /* Stores incomplete commands */ - u32 tmp_buf; - int tmp_buf_len; - - /* Stores already requested buffers */ - struct tm6000_buffer *buf; -}; diff --git a/drivers/staging/media/deprecated/tm6000/tm6000-video.c b/drivers/staging/media/deprecated/tm6000/tm6000-video.c deleted file mode 100644 index e06ed21edbdd..000000000000 --- a/drivers/staging/media/deprecated/tm6000/tm6000-video.c +++ /dev/null @@ -1,1703 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -// tm6000-video.c - driver for TM5600/TM6000/TM6010 USB video capture devices -// -// Copyright (c) 2006-2007 Mauro Carvalho Chehab -// -// Copyright (c) 2007 Michel Ludwig -// - Fixed module load/unload - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include "tm6000-regs.h" -#include "tm6000.h" - -#define BUFFER_TIMEOUT msecs_to_jiffies(2000) /* 2 seconds */ - -/* Limits minimum and default number of buffers */ -#define TM6000_MIN_BUF 4 -#define TM6000_DEF_BUF 8 - -#define TM6000_NUM_URB_BUF 8 - -#define TM6000_MAX_ISO_PACKETS 46 /* Max number of ISO packets */ - -/* Declare static vars that will be used as parameters */ -static unsigned int vid_limit = 16; /* Video memory limit, in Mb */ -static int video_nr = -1; /* /dev/videoN, -1 for autodetect */ -static int radio_nr = -1; /* /dev/radioN, -1 for autodetect */ -static bool keep_urb; /* keep urb buffers allocated */ - -/* Debug level */ -int tm6000_debug; -EXPORT_SYMBOL_GPL(tm6000_debug); - -static struct tm6000_fmt format[] = { - { - .fourcc = V4L2_PIX_FMT_YUYV, - .depth = 16, - }, { - .fourcc = V4L2_PIX_FMT_UYVY, - .depth = 16, - }, { - .fourcc = V4L2_PIX_FMT_TM6000, - .depth = 16, - } -}; - -/* ------------------------------------------------------------------ - * DMA and thread functions - * ------------------------------------------------------------------ - */ - -#define norm_maxw(a) 720 -#define norm_maxh(a) 576 - -#define norm_minw(a) norm_maxw(a) -#define norm_minh(a) norm_maxh(a) - -/* - * video-buf generic routine to get the next available buffer - */ -static inline void get_next_buf(struct tm6000_dmaqueue *dma_q, - struct tm6000_buffer **buf) -{ - struct tm6000_core *dev = container_of(dma_q, struct tm6000_core, vidq); - - if (list_empty(&dma_q->active)) { - dprintk(dev, V4L2_DEBUG_QUEUE, "No active queue to serve\n"); - *buf = NULL; - return; - } - - *buf = list_entry(dma_q->active.next, - struct tm6000_buffer, vb.queue); -} - -/* - * Announces that a buffer were filled and request the next - */ -static inline void buffer_filled(struct tm6000_core *dev, - struct tm6000_dmaqueue *dma_q, - struct tm6000_buffer *buf) -{ - /* Advice that buffer was filled */ - dprintk(dev, V4L2_DEBUG_ISOC, "[%p/%d] wakeup\n", buf, buf->vb.i); - buf->vb.state = VIDEOBUF_DONE; - buf->vb.field_count++; - buf->vb.ts = ktime_get_ns(); - - list_del(&buf->vb.queue); - wake_up(&buf->vb.done); -} - -/* - * Identify the tm5600/6000 buffer header type and properly handles - */ -static int copy_streams(u8 *data, unsigned long len, - struct urb *urb) -{ - struct tm6000_dmaqueue *dma_q = urb->context; - struct tm6000_core *dev = container_of(dma_q, struct tm6000_core, vidq); - u8 *ptr = data, *endp = data+len; - unsigned long header = 0; - int rc = 0; - unsigned int cmd, cpysize, pktsize, size, field, block, line, pos = 0; - struct tm6000_buffer *vbuf = NULL; - char *voutp = NULL; - unsigned int linewidth; - - if (!dev->radio) { - /* get video buffer */ - get_next_buf(dma_q, &vbuf); - - if (!vbuf) - return rc; - voutp = videobuf_to_vmalloc(&vbuf->vb); - - if (!voutp) - return 0; - } - - for (ptr = data; ptr < endp;) { - if (!dev->isoc_ctl.cmd) { - /* Header */ - if (dev->isoc_ctl.tmp_buf_len > 0) { - /* from last urb or packet */ - header = dev->isoc_ctl.tmp_buf; - if (4 - dev->isoc_ctl.tmp_buf_len > 0) { - memcpy((u8 *)&header + - dev->isoc_ctl.tmp_buf_len, - ptr, - 4 - dev->isoc_ctl.tmp_buf_len); - ptr += 4 - dev->isoc_ctl.tmp_buf_len; - } - dev->isoc_ctl.tmp_buf_len = 0; - } else { - if (ptr + 3 >= endp) { - /* have incomplete header */ - dev->isoc_ctl.tmp_buf_len = endp - ptr; - memcpy(&dev->isoc_ctl.tmp_buf, ptr, - dev->isoc_ctl.tmp_buf_len); - return rc; - } - /* Seek for sync */ - for (; ptr < endp - 3; ptr++) { - if (*(ptr + 3) == 0x47) - break; - } - /* Get message header */ - header = *(unsigned long *)ptr; - ptr += 4; - } - - /* split the header fields */ - size = ((header & 0x7e) << 1); - if (size > 0) - size -= 4; - block = (header >> 7) & 0xf; - field = (header >> 11) & 0x1; - line = (header >> 12) & 0x1ff; - cmd = (header >> 21) & 0x7; - /* Validates header fields */ - if (size > TM6000_URB_MSG_LEN) - size = TM6000_URB_MSG_LEN; - pktsize = TM6000_URB_MSG_LEN; - /* - * calculate position in buffer and change the buffer - */ - switch (cmd) { - case TM6000_URB_MSG_VIDEO: - if (!dev->radio) { - if ((dev->isoc_ctl.vfield != field) && - (field == 1)) { - /* - * Announces that a new buffer - * were filled - */ - buffer_filled(dev, dma_q, vbuf); - dprintk(dev, V4L2_DEBUG_ISOC, - "new buffer filled\n"); - get_next_buf(dma_q, &vbuf); - if (!vbuf) - return rc; - voutp = videobuf_to_vmalloc(&vbuf->vb); - if (!voutp) - return rc; - memset(voutp, 0, vbuf->vb.size); - } - linewidth = vbuf->vb.width << 1; - pos = ((line << 1) - field - 1) * - linewidth + block * TM6000_URB_MSG_LEN; - /* Don't allow to write out of the buffer */ - if (pos + size > vbuf->vb.size) - cmd = TM6000_URB_MSG_ERR; - dev->isoc_ctl.vfield = field; - } - break; - case TM6000_URB_MSG_VBI: - break; - case TM6000_URB_MSG_AUDIO: - case TM6000_URB_MSG_PTS: - size = pktsize; /* Size is always 180 bytes */ - break; - } - } else { - /* Continue the last copy */ - cmd = dev->isoc_ctl.cmd; - size = dev->isoc_ctl.size; - pos = dev->isoc_ctl.pos; - pktsize = dev->isoc_ctl.pktsize; - field = dev->isoc_ctl.field; - } - cpysize = (endp - ptr > size) ? size : endp - ptr; - if (cpysize) { - /* copy data in different buffers */ - switch (cmd) { - case TM6000_URB_MSG_VIDEO: - /* Fills video buffer */ - if (vbuf) - memcpy(&voutp[pos], ptr, cpysize); - break; - case TM6000_URB_MSG_AUDIO: { - int i; - for (i = 0; i < cpysize; i += 2) - swab16s((u16 *)(ptr + i)); - - tm6000_call_fillbuf(dev, TM6000_AUDIO, ptr, cpysize); - break; - } - case TM6000_URB_MSG_VBI: - /* Need some code to copy vbi buffer */ - break; - case TM6000_URB_MSG_PTS: { - /* Need some code to copy pts */ - u32 pts; - pts = *(u32 *)ptr; - dprintk(dev, V4L2_DEBUG_ISOC, "field %d, PTS %x", - field, pts); - break; - } - } - } - if (ptr + pktsize > endp) { - /* - * End of URB packet, but cmd processing is not - * complete. Preserve the state for a next packet - */ - dev->isoc_ctl.pos = pos + cpysize; - dev->isoc_ctl.size = size - cpysize; - dev->isoc_ctl.cmd = cmd; - dev->isoc_ctl.field = field; - dev->isoc_ctl.pktsize = pktsize - (endp - ptr); - ptr += endp - ptr; - } else { - dev->isoc_ctl.cmd = 0; - ptr += pktsize; - } - } - return 0; -} - -/* - * Identify the tm5600/6000 buffer header type and properly handles - */ -static int copy_multiplexed(u8 *ptr, unsigned long len, - struct urb *urb) -{ - struct tm6000_dmaqueue *dma_q = urb->context; - struct tm6000_core *dev = container_of(dma_q, struct tm6000_core, vidq); - unsigned int pos = dev->isoc_ctl.pos, cpysize; - int rc = 1; - struct tm6000_buffer *buf; - char *outp = NULL; - - get_next_buf(dma_q, &buf); - if (buf) - outp = videobuf_to_vmalloc(&buf->vb); - - if (!outp) - return 0; - - while (len > 0) { - cpysize = min(len, buf->vb.size-pos); - memcpy(&outp[pos], ptr, cpysize); - pos += cpysize; - ptr += cpysize; - len -= cpysize; - if (pos >= buf->vb.size) { - pos = 0; - /* Announces that a new buffer were filled */ - buffer_filled(dev, dma_q, buf); - dprintk(dev, V4L2_DEBUG_ISOC, "new buffer filled\n"); - get_next_buf(dma_q, &buf); - if (!buf) - break; - outp = videobuf_to_vmalloc(&(buf->vb)); - if (!outp) - return rc; - pos = 0; - } - } - - dev->isoc_ctl.pos = pos; - return rc; -} - -static inline void print_err_status(struct tm6000_core *dev, - int packet, int status) -{ - char *errmsg = "Unknown"; - - switch (status) { - case -ENOENT: - errmsg = "unlinked synchronously"; - break; - case -ECONNRESET: - errmsg = "unlinked asynchronously"; - break; - case -ENOSR: - errmsg = "Buffer error (overrun)"; - break; - case -EPIPE: - errmsg = "Stalled (device not responding)"; - break; - case -EOVERFLOW: - errmsg = "Babble (bad cable?)"; - break; - case -EPROTO: - errmsg = "Bit-stuff error (bad cable?)"; - break; - case -EILSEQ: - errmsg = "CRC/Timeout (could be anything)"; - break; - case -ETIME: - errmsg = "Device does not respond"; - break; - } - if (packet < 0) { - dprintk(dev, V4L2_DEBUG_QUEUE, "URB status %d [%s].\n", - status, errmsg); - } else { - dprintk(dev, V4L2_DEBUG_QUEUE, "URB packet %d, status %d [%s].\n", - packet, status, errmsg); - } -} - - -/* - * Controls the isoc copy of each urb packet - */ -static inline int tm6000_isoc_copy(struct urb *urb) -{ - struct tm6000_dmaqueue *dma_q = urb->context; - struct tm6000_core *dev = container_of(dma_q, struct tm6000_core, vidq); - int i, len = 0, rc = 1, status; - char *p; - - if (urb->status < 0) { - print_err_status(dev, -1, urb->status); - return 0; - } - - for (i = 0; i < urb->number_of_packets; i++) { - status = urb->iso_frame_desc[i].status; - - if (status < 0) { - print_err_status(dev, i, status); - continue; - } - - len = urb->iso_frame_desc[i].actual_length; - - if (len > 0) { - p = urb->transfer_buffer + urb->iso_frame_desc[i].offset; - if (!urb->iso_frame_desc[i].status) { - if ((dev->fourcc) == V4L2_PIX_FMT_TM6000) { - rc = copy_multiplexed(p, len, urb); - if (rc <= 0) - return rc; - } else { - copy_streams(p, len, urb); - } - } - } - } - return rc; -} - -/* ------------------------------------------------------------------ - * URB control - * ------------------------------------------------------------------ - */ - -/* - * IRQ callback, called by URB callback - */ -static void tm6000_irq_callback(struct urb *urb) -{ - struct tm6000_dmaqueue *dma_q = urb->context; - struct tm6000_core *dev = container_of(dma_q, struct tm6000_core, vidq); - unsigned long flags; - int i; - - switch (urb->status) { - case 0: - case -ETIMEDOUT: - break; - - case -ECONNRESET: - case -ENOENT: - case -ESHUTDOWN: - return; - - default: - tm6000_err("urb completion error %d.\n", urb->status); - break; - } - - spin_lock_irqsave(&dev->slock, flags); - tm6000_isoc_copy(urb); - spin_unlock_irqrestore(&dev->slock, flags); - - /* Reset urb buffers */ - for (i = 0; i < urb->number_of_packets; i++) { - urb->iso_frame_desc[i].status = 0; - urb->iso_frame_desc[i].actual_length = 0; - } - - urb->status = usb_submit_urb(urb, GFP_ATOMIC); - if (urb->status) - tm6000_err("urb resubmit failed (error=%i)\n", - urb->status); -} - -/* - * Allocate URB buffers - */ -static int tm6000_alloc_urb_buffers(struct tm6000_core *dev) -{ - int num_bufs = TM6000_NUM_URB_BUF; - int i; - - if (dev->urb_buffer) - return 0; - - dev->urb_buffer = kmalloc_array(num_bufs, sizeof(*dev->urb_buffer), - GFP_KERNEL); - if (!dev->urb_buffer) - return -ENOMEM; - - dev->urb_dma = kmalloc_array(num_bufs, sizeof(*dev->urb_dma), - GFP_KERNEL); - if (!dev->urb_dma) - return -ENOMEM; - - for (i = 0; i < num_bufs; i++) { - dev->urb_buffer[i] = usb_alloc_coherent( - dev->udev, dev->urb_size, - GFP_KERNEL, &dev->urb_dma[i]); - if (!dev->urb_buffer[i]) { - tm6000_err("unable to allocate %i bytes for transfer buffer %i\n", - dev->urb_size, i); - return -ENOMEM; - } - memset(dev->urb_buffer[i], 0, dev->urb_size); - } - - return 0; -} - -/* - * Free URB buffers - */ -static int tm6000_free_urb_buffers(struct tm6000_core *dev) -{ - int i; - - if (!dev->urb_buffer) - return 0; - - for (i = 0; i < TM6000_NUM_URB_BUF; i++) { - if (dev->urb_buffer[i]) { - usb_free_coherent(dev->udev, - dev->urb_size, - dev->urb_buffer[i], - dev->urb_dma[i]); - dev->urb_buffer[i] = NULL; - } - } - kfree(dev->urb_buffer); - kfree(dev->urb_dma); - dev->urb_buffer = NULL; - dev->urb_dma = NULL; - - return 0; -} - -/* - * Stop and Deallocate URBs - */ -static void tm6000_uninit_isoc(struct tm6000_core *dev) -{ - struct urb *urb; - int i; - - dev->isoc_ctl.buf = NULL; - for (i = 0; i < dev->isoc_ctl.num_bufs; i++) { - urb = dev->isoc_ctl.urb[i]; - if (urb) { - usb_kill_urb(urb); - usb_unlink_urb(urb); - usb_free_urb(urb); - dev->isoc_ctl.urb[i] = NULL; - } - dev->isoc_ctl.transfer_buffer[i] = NULL; - } - - if (!keep_urb) - tm6000_free_urb_buffers(dev); - - kfree(dev->isoc_ctl.urb); - kfree(dev->isoc_ctl.transfer_buffer); - - dev->isoc_ctl.urb = NULL; - dev->isoc_ctl.transfer_buffer = NULL; - dev->isoc_ctl.num_bufs = 0; -} - -/* - * Assign URBs and start IRQ - */ -static int tm6000_prepare_isoc(struct tm6000_core *dev) -{ - struct tm6000_dmaqueue *dma_q = &dev->vidq; - int i, j, sb_size, pipe, size, max_packets; - int num_bufs = TM6000_NUM_URB_BUF; - struct urb *urb; - - /* De-allocates all pending stuff */ - tm6000_uninit_isoc(dev); - /* Stop interrupt USB pipe */ - tm6000_ir_int_stop(dev); - - usb_set_interface(dev->udev, - dev->isoc_in.bInterfaceNumber, - dev->isoc_in.bAlternateSetting); - - /* Start interrupt USB pipe */ - tm6000_ir_int_start(dev); - - pipe = usb_rcvisocpipe(dev->udev, - dev->isoc_in.endp->desc.bEndpointAddress & - USB_ENDPOINT_NUMBER_MASK); - - size = usb_maxpacket(dev->udev, pipe); - - if (size > dev->isoc_in.maxsize) - size = dev->isoc_in.maxsize; - - dev->isoc_ctl.max_pkt_size = size; - - max_packets = TM6000_MAX_ISO_PACKETS; - sb_size = max_packets * size; - dev->urb_size = sb_size; - - dev->isoc_ctl.num_bufs = num_bufs; - - dev->isoc_ctl.urb = kmalloc_array(num_bufs, sizeof(void *), - GFP_KERNEL); - if (!dev->isoc_ctl.urb) - return -ENOMEM; - - dev->isoc_ctl.transfer_buffer = kmalloc_array(num_bufs, - sizeof(void *), - GFP_KERNEL); - if (!dev->isoc_ctl.transfer_buffer) { - kfree(dev->isoc_ctl.urb); - return -ENOMEM; - } - - dprintk(dev, V4L2_DEBUG_QUEUE, "Allocating %d x %d packets (%d bytes) of %d bytes each to handle %u size\n", - max_packets, num_bufs, sb_size, - dev->isoc_in.maxsize, size); - - - if (tm6000_alloc_urb_buffers(dev) < 0) { - tm6000_err("cannot allocate memory for urb buffers\n"); - - /* call free, as some buffers might have been allocated */ - tm6000_free_urb_buffers(dev); - kfree(dev->isoc_ctl.urb); - kfree(dev->isoc_ctl.transfer_buffer); - return -ENOMEM; - } - - /* allocate urbs and transfer buffers */ - for (i = 0; i < dev->isoc_ctl.num_bufs; i++) { - urb = usb_alloc_urb(max_packets, GFP_KERNEL); - if (!urb) { - tm6000_uninit_isoc(dev); - tm6000_free_urb_buffers(dev); - return -ENOMEM; - } - dev->isoc_ctl.urb[i] = urb; - - urb->transfer_dma = dev->urb_dma[i]; - dev->isoc_ctl.transfer_buffer[i] = dev->urb_buffer[i]; - - usb_fill_bulk_urb(urb, dev->udev, pipe, - dev->isoc_ctl.transfer_buffer[i], sb_size, - tm6000_irq_callback, dma_q); - urb->interval = dev->isoc_in.endp->desc.bInterval; - urb->number_of_packets = max_packets; - urb->transfer_flags = URB_ISO_ASAP | URB_NO_TRANSFER_DMA_MAP; - - for (j = 0; j < max_packets; j++) { - urb->iso_frame_desc[j].offset = size * j; - urb->iso_frame_desc[j].length = size; - } - } - - return 0; -} - -static int tm6000_start_thread(struct tm6000_core *dev) -{ - struct tm6000_dmaqueue *dma_q = &dev->vidq; - int i; - - dma_q->frame = 0; - dma_q->ini_jiffies = jiffies; - - init_waitqueue_head(&dma_q->wq); - - /* submit urbs and enables IRQ */ - for (i = 0; i < dev->isoc_ctl.num_bufs; i++) { - int rc = usb_submit_urb(dev->isoc_ctl.urb[i], GFP_ATOMIC); - if (rc) { - tm6000_err("submit of urb %i failed (error=%i)\n", i, - rc); - tm6000_uninit_isoc(dev); - return rc; - } - } - - return 0; -} - -/* ------------------------------------------------------------------ - * Videobuf operations - * ------------------------------------------------------------------ - */ - -static int -buffer_setup(struct videobuf_queue *vq, unsigned int *count, unsigned int *size) -{ - struct tm6000_fh *fh = vq->priv_data; - - *size = fh->fmt->depth * fh->width * fh->height >> 3; - if (0 == *count) - *count = TM6000_DEF_BUF; - - if (*count < TM6000_MIN_BUF) - *count = TM6000_MIN_BUF; - - while (*size * *count > vid_limit * 1024 * 1024) - (*count)--; - - return 0; -} - -static void free_buffer(struct videobuf_queue *vq, struct tm6000_buffer *buf) -{ - struct tm6000_fh *fh = vq->priv_data; - struct tm6000_core *dev = fh->dev; - unsigned long flags; - - /* We used to wait for the buffer to finish here, but this didn't work - because, as we were keeping the state as VIDEOBUF_QUEUED, - videobuf_queue_cancel marked it as finished for us. - (Also, it could wedge forever if the hardware was misconfigured.) - - This should be safe; by the time we get here, the buffer isn't - queued anymore. If we ever start marking the buffers as - VIDEOBUF_ACTIVE, it won't be, though. - */ - spin_lock_irqsave(&dev->slock, flags); - if (dev->isoc_ctl.buf == buf) - dev->isoc_ctl.buf = NULL; - spin_unlock_irqrestore(&dev->slock, flags); - - videobuf_vmalloc_free(&buf->vb); - buf->vb.state = VIDEOBUF_NEEDS_INIT; -} - -static int -buffer_prepare(struct videobuf_queue *vq, struct videobuf_buffer *vb, - enum v4l2_field field) -{ - struct tm6000_fh *fh = vq->priv_data; - struct tm6000_buffer *buf = container_of(vb, struct tm6000_buffer, vb); - struct tm6000_core *dev = fh->dev; - int rc = 0; - - BUG_ON(NULL == fh->fmt); - - - /* FIXME: It assumes depth=2 */ - /* The only currently supported format is 16 bits/pixel */ - buf->vb.size = fh->fmt->depth*fh->width*fh->height >> 3; - if (0 != buf->vb.baddr && buf->vb.bsize < buf->vb.size) - return -EINVAL; - - if (buf->fmt != fh->fmt || - buf->vb.width != fh->width || - buf->vb.height != fh->height || - buf->vb.field != field) { - buf->fmt = fh->fmt; - buf->vb.width = fh->width; - buf->vb.height = fh->height; - buf->vb.field = field; - buf->vb.state = VIDEOBUF_NEEDS_INIT; - } - - if (VIDEOBUF_NEEDS_INIT == buf->vb.state) { - rc = videobuf_iolock(vq, &buf->vb, NULL); - if (rc != 0) - goto fail; - } - - if (!dev->isoc_ctl.num_bufs) { - rc = tm6000_prepare_isoc(dev); - if (rc < 0) - goto fail; - - rc = tm6000_start_thread(dev); - if (rc < 0) - goto fail; - - } - - buf->vb.state = VIDEOBUF_PREPARED; - return 0; - -fail: - free_buffer(vq, buf); - return rc; -} - -static void -buffer_queue(struct videobuf_queue *vq, struct videobuf_buffer *vb) -{ - struct tm6000_buffer *buf = container_of(vb, struct tm6000_buffer, vb); - struct tm6000_fh *fh = vq->priv_data; - struct tm6000_core *dev = fh->dev; - struct tm6000_dmaqueue *vidq = &dev->vidq; - - buf->vb.state = VIDEOBUF_QUEUED; - list_add_tail(&buf->vb.queue, &vidq->active); -} - -static void buffer_release(struct videobuf_queue *vq, struct videobuf_buffer *vb) -{ - struct tm6000_buffer *buf = container_of(vb, struct tm6000_buffer, vb); - - free_buffer(vq, buf); -} - -static const struct videobuf_queue_ops tm6000_video_qops = { - .buf_setup = buffer_setup, - .buf_prepare = buffer_prepare, - .buf_queue = buffer_queue, - .buf_release = buffer_release, -}; - -/* ------------------------------------------------------------------ - * IOCTL handling - * ------------------------------------------------------------------ - */ - -static bool is_res_read(struct tm6000_core *dev, struct tm6000_fh *fh) -{ - /* Is the current fh handling it? if so, that's OK */ - if (dev->resources == fh && dev->is_res_read) - return true; - - return false; -} - -static bool is_res_streaming(struct tm6000_core *dev, struct tm6000_fh *fh) -{ - /* Is the current fh handling it? if so, that's OK */ - if (dev->resources == fh) - return true; - - return false; -} - -static bool res_get(struct tm6000_core *dev, struct tm6000_fh *fh, - bool is_res_read) -{ - /* Is the current fh handling it? if so, that's OK */ - if (dev->resources == fh && dev->is_res_read == is_res_read) - return true; - - /* is it free? */ - if (dev->resources) - return false; - - /* grab it */ - dev->resources = fh; - dev->is_res_read = is_res_read; - dprintk(dev, V4L2_DEBUG_RES_LOCK, "res: get\n"); - return true; -} - -static void res_free(struct tm6000_core *dev, struct tm6000_fh *fh) -{ - /* Is the current fh handling it? if so, that's OK */ - if (dev->resources != fh) - return; - - dev->resources = NULL; - dprintk(dev, V4L2_DEBUG_RES_LOCK, "res: put\n"); -} - -/* ------------------------------------------------------------------ - * IOCTL vidioc handling - * ------------------------------------------------------------------ - */ -static int vidioc_querycap(struct file *file, void *priv, - struct v4l2_capability *cap) -{ - struct tm6000_core *dev = ((struct tm6000_fh *)priv)->dev; - - strscpy(cap->driver, "tm6000", sizeof(cap->driver)); - strscpy(cap->card, "Trident TM5600/6000/6010", sizeof(cap->card)); - usb_make_path(dev->udev, cap->bus_info, sizeof(cap->bus_info)); - cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_READWRITE | - V4L2_CAP_DEVICE_CAPS; - if (dev->tuner_type != TUNER_ABSENT) - cap->capabilities |= V4L2_CAP_TUNER; - if (dev->caps.has_radio) - cap->capabilities |= V4L2_CAP_RADIO; - - return 0; -} - -static int vidioc_enum_fmt_vid_cap(struct file *file, void *priv, - struct v4l2_fmtdesc *f) -{ - if (f->index >= ARRAY_SIZE(format)) - return -EINVAL; - - f->pixelformat = format[f->index].fourcc; - return 0; -} - -static int vidioc_g_fmt_vid_cap(struct file *file, void *priv, - struct v4l2_format *f) -{ - struct tm6000_fh *fh = priv; - - f->fmt.pix.width = fh->width; - f->fmt.pix.height = fh->height; - f->fmt.pix.field = fh->vb_vidq.field; - f->fmt.pix.pixelformat = fh->fmt->fourcc; - f->fmt.pix.colorspace = V4L2_COLORSPACE_SMPTE170M; - f->fmt.pix.bytesperline = - (f->fmt.pix.width * fh->fmt->depth) >> 3; - f->fmt.pix.sizeimage = - f->fmt.pix.height * f->fmt.pix.bytesperline; - - return 0; -} - -static struct tm6000_fmt *format_by_fourcc(unsigned int fourcc) -{ - unsigned int i; - - for (i = 0; i < ARRAY_SIZE(format); i++) - if (format[i].fourcc == fourcc) - return format+i; - return NULL; -} - -static int vidioc_try_fmt_vid_cap(struct file *file, void *priv, - struct v4l2_format *f) -{ - struct tm6000_core *dev = ((struct tm6000_fh *)priv)->dev; - struct tm6000_fmt *fmt; - enum v4l2_field field; - - fmt = format_by_fourcc(f->fmt.pix.pixelformat); - if (NULL == fmt) { - dprintk(dev, 2, "Fourcc format (0x%08x) invalid.\n", - f->fmt.pix.pixelformat); - return -EINVAL; - } - - field = V4L2_FIELD_INTERLACED; - - tm6000_get_std_res(dev); - - f->fmt.pix.width = dev->width; - f->fmt.pix.height = dev->height; - - f->fmt.pix.width &= ~0x01; - - f->fmt.pix.field = field; - - f->fmt.pix.bytesperline = - (f->fmt.pix.width * fmt->depth) >> 3; - f->fmt.pix.sizeimage = - f->fmt.pix.height * f->fmt.pix.bytesperline; - f->fmt.pix.colorspace = V4L2_COLORSPACE_SMPTE170M; - - return 0; -} - -/*FIXME: This seems to be generic enough to be at videodev2 */ -static int vidioc_s_fmt_vid_cap(struct file *file, void *priv, - struct v4l2_format *f) -{ - struct tm6000_fh *fh = priv; - struct tm6000_core *dev = fh->dev; - int ret = vidioc_try_fmt_vid_cap(file, fh, f); - if (ret < 0) - return ret; - - fh->fmt = format_by_fourcc(f->fmt.pix.pixelformat); - fh->width = f->fmt.pix.width; - fh->height = f->fmt.pix.height; - fh->vb_vidq.field = f->fmt.pix.field; - fh->type = f->type; - - dev->fourcc = f->fmt.pix.pixelformat; - - tm6000_set_fourcc_format(dev); - - return 0; -} - -static int vidioc_reqbufs(struct file *file, void *priv, - struct v4l2_requestbuffers *p) -{ - struct tm6000_fh *fh = priv; - - return videobuf_reqbufs(&fh->vb_vidq, p); -} - -static int vidioc_querybuf(struct file *file, void *priv, - struct v4l2_buffer *p) -{ - struct tm6000_fh *fh = priv; - - return videobuf_querybuf(&fh->vb_vidq, p); -} - -static int vidioc_qbuf(struct file *file, void *priv, struct v4l2_buffer *p) -{ - struct tm6000_fh *fh = priv; - - return videobuf_qbuf(&fh->vb_vidq, p); -} - -static int vidioc_dqbuf(struct file *file, void *priv, struct v4l2_buffer *p) -{ - struct tm6000_fh *fh = priv; - - return videobuf_dqbuf(&fh->vb_vidq, p, - file->f_flags & O_NONBLOCK); -} - -static int vidioc_streamon(struct file *file, void *priv, enum v4l2_buf_type i) -{ - struct tm6000_fh *fh = priv; - struct tm6000_core *dev = fh->dev; - - if (fh->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) - return -EINVAL; - if (i != fh->type) - return -EINVAL; - - if (!res_get(dev, fh, false)) - return -EBUSY; - return videobuf_streamon(&fh->vb_vidq); -} - -static int vidioc_streamoff(struct file *file, void *priv, enum v4l2_buf_type i) -{ - struct tm6000_fh *fh = priv; - struct tm6000_core *dev = fh->dev; - - if (fh->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) - return -EINVAL; - - if (i != fh->type) - return -EINVAL; - - videobuf_streamoff(&fh->vb_vidq); - res_free(dev, fh); - - return 0; -} - -static int vidioc_s_std(struct file *file, void *priv, v4l2_std_id norm) -{ - int rc = 0; - struct tm6000_fh *fh = priv; - struct tm6000_core *dev = fh->dev; - - dev->norm = norm; - rc = tm6000_init_analog_mode(dev); - - fh->width = dev->width; - fh->height = dev->height; - - if (rc < 0) - return rc; - - v4l2_device_call_all(&dev->v4l2_dev, 0, video, s_std, dev->norm); - - return 0; -} - -static int vidioc_g_std(struct file *file, void *priv, v4l2_std_id *norm) -{ - struct tm6000_fh *fh = priv; - struct tm6000_core *dev = fh->dev; - - *norm = dev->norm; - return 0; -} - -static const char *iname[] = { - [TM6000_INPUT_TV] = "Television", - [TM6000_INPUT_COMPOSITE1] = "Composite 1", - [TM6000_INPUT_COMPOSITE2] = "Composite 2", - [TM6000_INPUT_SVIDEO] = "S-Video", -}; - -static int vidioc_enum_input(struct file *file, void *priv, - struct v4l2_input *i) -{ - struct tm6000_fh *fh = priv; - struct tm6000_core *dev = fh->dev; - unsigned int n; - - n = i->index; - if (n >= 3) - return -EINVAL; - - if (!dev->vinput[n].type) - return -EINVAL; - - i->index = n; - - if (dev->vinput[n].type == TM6000_INPUT_TV) - i->type = V4L2_INPUT_TYPE_TUNER; - else - i->type = V4L2_INPUT_TYPE_CAMERA; - - strscpy(i->name, iname[dev->vinput[n].type], sizeof(i->name)); - - i->std = TM6000_STD; - - return 0; -} - -static int vidioc_g_input(struct file *file, void *priv, unsigned int *i) -{ - struct tm6000_fh *fh = priv; - struct tm6000_core *dev = fh->dev; - - *i = dev->input; - - return 0; -} - -static int vidioc_s_input(struct file *file, void *priv, unsigned int i) -{ - struct tm6000_fh *fh = priv; - struct tm6000_core *dev = fh->dev; - int rc = 0; - - if (i >= 3) - return -EINVAL; - if (!dev->vinput[i].type) - return -EINVAL; - - dev->input = i; - - rc = vidioc_s_std(file, priv, dev->norm); - - return rc; -} - -/* --- controls ---------------------------------------------- */ - -static int tm6000_s_ctrl(struct v4l2_ctrl *ctrl) -{ - struct tm6000_core *dev = container_of(ctrl->handler, struct tm6000_core, ctrl_handler); - u8 val = ctrl->val; - - switch (ctrl->id) { - case V4L2_CID_CONTRAST: - tm6000_set_reg(dev, TM6010_REQ07_R08_LUMA_CONTRAST_ADJ, val); - return 0; - case V4L2_CID_BRIGHTNESS: - tm6000_set_reg(dev, TM6010_REQ07_R09_LUMA_BRIGHTNESS_ADJ, val); - return 0; - case V4L2_CID_SATURATION: - tm6000_set_reg(dev, TM6010_REQ07_R0A_CHROMA_SATURATION_ADJ, val); - return 0; - case V4L2_CID_HUE: - tm6000_set_reg(dev, TM6010_REQ07_R0B_CHROMA_HUE_PHASE_ADJ, val); - return 0; - } - return -EINVAL; -} - -static const struct v4l2_ctrl_ops tm6000_ctrl_ops = { - .s_ctrl = tm6000_s_ctrl, -}; - -static int tm6000_radio_s_ctrl(struct v4l2_ctrl *ctrl) -{ - struct tm6000_core *dev = container_of(ctrl->handler, - struct tm6000_core, radio_ctrl_handler); - u8 val = ctrl->val; - - switch (ctrl->id) { - case V4L2_CID_AUDIO_MUTE: - dev->ctl_mute = val; - tm6000_tvaudio_set_mute(dev, val); - return 0; - case V4L2_CID_AUDIO_VOLUME: - dev->ctl_volume = val; - tm6000_set_volume(dev, val); - return 0; - } - return -EINVAL; -} - -static const struct v4l2_ctrl_ops tm6000_radio_ctrl_ops = { - .s_ctrl = tm6000_radio_s_ctrl, -}; - -static int vidioc_g_tuner(struct file *file, void *priv, - struct v4l2_tuner *t) -{ - struct tm6000_fh *fh = priv; - struct tm6000_core *dev = fh->dev; - - if (UNSET == dev->tuner_type) - return -ENOTTY; - if (0 != t->index) - return -EINVAL; - - strscpy(t->name, "Television", sizeof(t->name)); - t->type = V4L2_TUNER_ANALOG_TV; - t->capability = V4L2_TUNER_CAP_NORM | V4L2_TUNER_CAP_STEREO; - t->rangehigh = 0xffffffffUL; - t->rxsubchans = V4L2_TUNER_SUB_STEREO; - - v4l2_device_call_all(&dev->v4l2_dev, 0, tuner, g_tuner, t); - - t->audmode = dev->amode; - - return 0; -} - -static int vidioc_s_tuner(struct file *file, void *priv, - const struct v4l2_tuner *t) -{ - struct tm6000_fh *fh = priv; - struct tm6000_core *dev = fh->dev; - - if (UNSET == dev->tuner_type) - return -ENOTTY; - if (0 != t->index) - return -EINVAL; - - if (t->audmode > V4L2_TUNER_MODE_STEREO) - dev->amode = V4L2_TUNER_MODE_STEREO; - else - dev->amode = t->audmode; - dprintk(dev, 3, "audio mode: %x\n", t->audmode); - - v4l2_device_call_all(&dev->v4l2_dev, 0, tuner, s_tuner, t); - - return 0; -} - -static int vidioc_g_frequency(struct file *file, void *priv, - struct v4l2_frequency *f) -{ - struct tm6000_fh *fh = priv; - struct tm6000_core *dev = fh->dev; - - if (UNSET == dev->tuner_type) - return -ENOTTY; - if (f->tuner) - return -EINVAL; - - f->frequency = dev->freq; - - v4l2_device_call_all(&dev->v4l2_dev, 0, tuner, g_frequency, f); - - return 0; -} - -static int vidioc_s_frequency(struct file *file, void *priv, - const struct v4l2_frequency *f) -{ - struct tm6000_fh *fh = priv; - struct tm6000_core *dev = fh->dev; - - if (UNSET == dev->tuner_type) - return -ENOTTY; - if (f->tuner != 0) - return -EINVAL; - - dev->freq = f->frequency; - v4l2_device_call_all(&dev->v4l2_dev, 0, tuner, s_frequency, f); - - return 0; -} - -static int radio_g_tuner(struct file *file, void *priv, - struct v4l2_tuner *t) -{ - struct tm6000_fh *fh = file->private_data; - struct tm6000_core *dev = fh->dev; - - if (0 != t->index) - return -EINVAL; - - memset(t, 0, sizeof(*t)); - strscpy(t->name, "Radio", sizeof(t->name)); - t->type = V4L2_TUNER_RADIO; - t->capability = V4L2_TUNER_CAP_LOW | V4L2_TUNER_CAP_STEREO; - t->rxsubchans = V4L2_TUNER_SUB_STEREO; - t->audmode = V4L2_TUNER_MODE_STEREO; - - v4l2_device_call_all(&dev->v4l2_dev, 0, tuner, g_tuner, t); - - return 0; -} - -static int radio_s_tuner(struct file *file, void *priv, - const struct v4l2_tuner *t) -{ - struct tm6000_fh *fh = file->private_data; - struct tm6000_core *dev = fh->dev; - - if (0 != t->index) - return -EINVAL; - v4l2_device_call_all(&dev->v4l2_dev, 0, tuner, s_tuner, t); - return 0; -} - -/* ------------------------------------------------------------------ - File operations for the device - ------------------------------------------------------------------*/ - -static int __tm6000_open(struct file *file) -{ - struct video_device *vdev = video_devdata(file); - struct tm6000_core *dev = video_drvdata(file); - struct tm6000_fh *fh; - enum v4l2_buf_type type = V4L2_BUF_TYPE_VIDEO_CAPTURE; - int rc; - int radio = 0; - - dprintk(dev, V4L2_DEBUG_OPEN, "tm6000: open called (dev=%s)\n", - video_device_node_name(vdev)); - - switch (vdev->vfl_type) { - case VFL_TYPE_VIDEO: - type = V4L2_BUF_TYPE_VIDEO_CAPTURE; - break; - case VFL_TYPE_VBI: - type = V4L2_BUF_TYPE_VBI_CAPTURE; - break; - case VFL_TYPE_RADIO: - radio = 1; - break; - default: - return -EINVAL; - } - - /* If more than one user, mutex should be added */ - dev->users++; - - dprintk(dev, V4L2_DEBUG_OPEN, "open dev=%s type=%s users=%d\n", - video_device_node_name(vdev), v4l2_type_names[type], - dev->users); - - /* allocate + initialize per filehandle data */ - fh = kzalloc(sizeof(*fh), GFP_KERNEL); - if (NULL == fh) { - dev->users--; - return -ENOMEM; - } - - v4l2_fh_init(&fh->fh, vdev); - file->private_data = fh; - fh->dev = dev; - fh->radio = radio; - dev->radio = radio; - fh->type = type; - dev->fourcc = format[0].fourcc; - - fh->fmt = format_by_fourcc(dev->fourcc); - - tm6000_get_std_res(dev); - - fh->width = dev->width; - fh->height = dev->height; - - dprintk(dev, V4L2_DEBUG_OPEN, "Open: fh=%p, dev=%p, dev->vidq=%p\n", - fh, dev, &dev->vidq); - dprintk(dev, V4L2_DEBUG_OPEN, "Open: list_empty queued=%d\n", - list_empty(&dev->vidq.queued)); - dprintk(dev, V4L2_DEBUG_OPEN, "Open: list_empty active=%d\n", - list_empty(&dev->vidq.active)); - - /* initialize hardware on analog mode */ - rc = tm6000_init_analog_mode(dev); - if (rc < 0) { - v4l2_fh_exit(&fh->fh); - kfree(fh); - return rc; - } - - dev->mode = TM6000_MODE_ANALOG; - - if (!fh->radio) { - videobuf_queue_vmalloc_init(&fh->vb_vidq, &tm6000_video_qops, - NULL, &dev->slock, - fh->type, - V4L2_FIELD_INTERLACED, - sizeof(struct tm6000_buffer), fh, &dev->lock); - } else { - dprintk(dev, V4L2_DEBUG_OPEN, "video_open: setting radio device\n"); - tm6000_set_audio_rinput(dev); - v4l2_device_call_all(&dev->v4l2_dev, 0, tuner, s_radio); - tm6000_prepare_isoc(dev); - tm6000_start_thread(dev); - } - v4l2_fh_add(&fh->fh); - - return 0; -} - -static int tm6000_open(struct file *file) -{ - struct video_device *vdev = video_devdata(file); - int res; - - mutex_lock(vdev->lock); - res = __tm6000_open(file); - mutex_unlock(vdev->lock); - return res; -} - -static ssize_t -tm6000_read(struct file *file, char __user *data, size_t count, loff_t *pos) -{ - struct tm6000_fh *fh = file->private_data; - struct tm6000_core *dev = fh->dev; - - if (fh->type == V4L2_BUF_TYPE_VIDEO_CAPTURE) { - int res; - - if (!res_get(fh->dev, fh, true)) - return -EBUSY; - - if (mutex_lock_interruptible(&dev->lock)) - return -ERESTARTSYS; - res = videobuf_read_stream(&fh->vb_vidq, data, count, pos, 0, - file->f_flags & O_NONBLOCK); - mutex_unlock(&dev->lock); - return res; - } - return 0; -} - -static __poll_t -__tm6000_poll(struct file *file, struct poll_table_struct *wait) -{ - __poll_t req_events = poll_requested_events(wait); - struct tm6000_fh *fh = file->private_data; - struct tm6000_buffer *buf; - __poll_t res = 0; - - if (v4l2_event_pending(&fh->fh)) - res = EPOLLPRI; - else if (req_events & EPOLLPRI) - poll_wait(file, &fh->fh.wait, wait); - if (V4L2_BUF_TYPE_VIDEO_CAPTURE != fh->type) - return res | EPOLLERR; - - if (!!is_res_streaming(fh->dev, fh)) - return res | EPOLLERR; - - if (!is_res_read(fh->dev, fh)) { - /* streaming capture */ - if (list_empty(&fh->vb_vidq.stream)) - return res | EPOLLERR; - buf = list_entry(fh->vb_vidq.stream.next, struct tm6000_buffer, vb.stream); - poll_wait(file, &buf->vb.done, wait); - if (buf->vb.state == VIDEOBUF_DONE || - buf->vb.state == VIDEOBUF_ERROR) - return res | EPOLLIN | EPOLLRDNORM; - } else if (req_events & (EPOLLIN | EPOLLRDNORM)) { - /* read() capture */ - return res | videobuf_poll_stream(file, &fh->vb_vidq, wait); - } - return res; -} - -static __poll_t tm6000_poll(struct file *file, struct poll_table_struct *wait) -{ - struct tm6000_fh *fh = file->private_data; - struct tm6000_core *dev = fh->dev; - __poll_t res; - - mutex_lock(&dev->lock); - res = __tm6000_poll(file, wait); - mutex_unlock(&dev->lock); - return res; -} - -static int tm6000_release(struct file *file) -{ - struct tm6000_fh *fh = file->private_data; - struct tm6000_core *dev = fh->dev; - struct video_device *vdev = video_devdata(file); - - dprintk(dev, V4L2_DEBUG_OPEN, "tm6000: close called (dev=%s, users=%d)\n", - video_device_node_name(vdev), dev->users); - - mutex_lock(&dev->lock); - dev->users--; - - res_free(dev, fh); - - if (!dev->users) { - tm6000_uninit_isoc(dev); - - /* Stop interrupt USB pipe */ - tm6000_ir_int_stop(dev); - - usb_reset_configuration(dev->udev); - - if (dev->int_in.endp) - usb_set_interface(dev->udev, - dev->isoc_in.bInterfaceNumber, 2); - else - usb_set_interface(dev->udev, - dev->isoc_in.bInterfaceNumber, 0); - - /* Start interrupt USB pipe */ - tm6000_ir_int_start(dev); - - if (!fh->radio) - videobuf_mmap_free(&fh->vb_vidq); - } - v4l2_fh_del(&fh->fh); - v4l2_fh_exit(&fh->fh); - kfree(fh); - mutex_unlock(&dev->lock); - - return 0; -} - -static int tm6000_mmap(struct file *file, struct vm_area_struct * vma) -{ - struct tm6000_fh *fh = file->private_data; - struct tm6000_core *dev = fh->dev; - int res; - - if (mutex_lock_interruptible(&dev->lock)) - return -ERESTARTSYS; - res = videobuf_mmap_mapper(&fh->vb_vidq, vma); - mutex_unlock(&dev->lock); - return res; -} - -static const struct v4l2_file_operations tm6000_fops = { - .owner = THIS_MODULE, - .open = tm6000_open, - .release = tm6000_release, - .unlocked_ioctl = video_ioctl2, /* V4L2 ioctl handler */ - .read = tm6000_read, - .poll = tm6000_poll, - .mmap = tm6000_mmap, -}; - -static const struct v4l2_ioctl_ops video_ioctl_ops = { - .vidioc_querycap = vidioc_querycap, - .vidioc_enum_fmt_vid_cap = vidioc_enum_fmt_vid_cap, - .vidioc_g_fmt_vid_cap = vidioc_g_fmt_vid_cap, - .vidioc_try_fmt_vid_cap = vidioc_try_fmt_vid_cap, - .vidioc_s_fmt_vid_cap = vidioc_s_fmt_vid_cap, - .vidioc_s_std = vidioc_s_std, - .vidioc_g_std = vidioc_g_std, - .vidioc_enum_input = vidioc_enum_input, - .vidioc_g_input = vidioc_g_input, - .vidioc_s_input = vidioc_s_input, - .vidioc_g_tuner = vidioc_g_tuner, - .vidioc_s_tuner = vidioc_s_tuner, - .vidioc_g_frequency = vidioc_g_frequency, - .vidioc_s_frequency = vidioc_s_frequency, - .vidioc_streamon = vidioc_streamon, - .vidioc_streamoff = vidioc_streamoff, - .vidioc_reqbufs = vidioc_reqbufs, - .vidioc_querybuf = vidioc_querybuf, - .vidioc_qbuf = vidioc_qbuf, - .vidioc_dqbuf = vidioc_dqbuf, - .vidioc_subscribe_event = v4l2_ctrl_subscribe_event, - .vidioc_unsubscribe_event = v4l2_event_unsubscribe, -}; - -static struct video_device tm6000_template = { - .name = "tm6000", - .fops = &tm6000_fops, - .ioctl_ops = &video_ioctl_ops, - .release = video_device_release_empty, - .tvnorms = TM6000_STD, -}; - -static const struct v4l2_file_operations radio_fops = { - .owner = THIS_MODULE, - .open = tm6000_open, - .poll = v4l2_ctrl_poll, - .release = tm6000_release, - .unlocked_ioctl = video_ioctl2, -}; - -static const struct v4l2_ioctl_ops radio_ioctl_ops = { - .vidioc_querycap = vidioc_querycap, - .vidioc_g_tuner = radio_g_tuner, - .vidioc_s_tuner = radio_s_tuner, - .vidioc_g_frequency = vidioc_g_frequency, - .vidioc_s_frequency = vidioc_s_frequency, - .vidioc_subscribe_event = v4l2_ctrl_subscribe_event, - .vidioc_unsubscribe_event = v4l2_event_unsubscribe, -}; - -static struct video_device tm6000_radio_template = { - .name = "tm6000", - .fops = &radio_fops, - .ioctl_ops = &radio_ioctl_ops, -}; - -/* ----------------------------------------------------------------- - * Initialization and module stuff - * ------------------------------------------------------------------ - */ - -static void vdev_init(struct tm6000_core *dev, - struct video_device *vfd, - const struct video_device - *template, const char *type_name) -{ - *vfd = *template; - vfd->v4l2_dev = &dev->v4l2_dev; - vfd->release = video_device_release_empty; - vfd->lock = &dev->lock; - - snprintf(vfd->name, sizeof(vfd->name), "%s %s", dev->name, type_name); - - video_set_drvdata(vfd, dev); -} - -int tm6000_v4l2_register(struct tm6000_core *dev) -{ - int ret = 0; - - v4l2_ctrl_handler_init(&dev->ctrl_handler, 6); - v4l2_ctrl_handler_init(&dev->radio_ctrl_handler, 2); - v4l2_ctrl_new_std(&dev->radio_ctrl_handler, &tm6000_radio_ctrl_ops, - V4L2_CID_AUDIO_MUTE, 0, 1, 1, 0); - v4l2_ctrl_new_std(&dev->radio_ctrl_handler, &tm6000_radio_ctrl_ops, - V4L2_CID_AUDIO_VOLUME, -15, 15, 1, 0); - v4l2_ctrl_new_std(&dev->ctrl_handler, &tm6000_ctrl_ops, - V4L2_CID_BRIGHTNESS, 0, 255, 1, 54); - v4l2_ctrl_new_std(&dev->ctrl_handler, &tm6000_ctrl_ops, - V4L2_CID_CONTRAST, 0, 255, 1, 119); - v4l2_ctrl_new_std(&dev->ctrl_handler, &tm6000_ctrl_ops, - V4L2_CID_SATURATION, 0, 255, 1, 112); - v4l2_ctrl_new_std(&dev->ctrl_handler, &tm6000_ctrl_ops, - V4L2_CID_HUE, -128, 127, 1, 0); - v4l2_ctrl_add_handler(&dev->ctrl_handler, - &dev->radio_ctrl_handler, NULL, false); - - if (dev->radio_ctrl_handler.error) - ret = dev->radio_ctrl_handler.error; - if (!ret && dev->ctrl_handler.error) - ret = dev->ctrl_handler.error; - if (ret) - goto free_ctrl; - - vdev_init(dev, &dev->vfd, &tm6000_template, "video"); - - dev->vfd.ctrl_handler = &dev->ctrl_handler; - dev->vfd.device_caps = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING | - V4L2_CAP_READWRITE; - if (dev->tuner_type != TUNER_ABSENT) - dev->vfd.device_caps |= V4L2_CAP_TUNER; - - /* init video dma queues */ - INIT_LIST_HEAD(&dev->vidq.active); - INIT_LIST_HEAD(&dev->vidq.queued); - - ret = video_register_device(&dev->vfd, VFL_TYPE_VIDEO, video_nr); - - if (ret < 0) { - printk(KERN_INFO "%s: can't register video device\n", - dev->name); - goto free_ctrl; - } - - printk(KERN_INFO "%s: registered device %s\n", - dev->name, video_device_node_name(&dev->vfd)); - - if (dev->caps.has_radio) { - vdev_init(dev, &dev->radio_dev, &tm6000_radio_template, - "radio"); - dev->radio_dev.ctrl_handler = &dev->radio_ctrl_handler; - dev->radio_dev.device_caps = V4L2_CAP_RADIO | V4L2_CAP_TUNER; - ret = video_register_device(&dev->radio_dev, VFL_TYPE_RADIO, - radio_nr); - if (ret < 0) { - printk(KERN_INFO "%s: can't register radio device\n", - dev->name); - goto unreg_video; - } - - printk(KERN_INFO "%s: registered device %s\n", - dev->name, video_device_node_name(&dev->radio_dev)); - } - - printk(KERN_INFO "Trident TVMaster TM5600/TM6000/TM6010 USB2 board (Load status: %d)\n", ret); - return ret; - -unreg_video: - video_unregister_device(&dev->vfd); -free_ctrl: - v4l2_ctrl_handler_free(&dev->ctrl_handler); - v4l2_ctrl_handler_free(&dev->radio_ctrl_handler); - return ret; -} - -int tm6000_v4l2_unregister(struct tm6000_core *dev) -{ - video_unregister_device(&dev->vfd); - - /* if URB buffers are still allocated free them now */ - tm6000_free_urb_buffers(dev); - - video_unregister_device(&dev->radio_dev); - return 0; -} - -int tm6000_v4l2_exit(void) -{ - return 0; -} - -module_param(video_nr, int, 0); -MODULE_PARM_DESC(video_nr, "Allow changing video device number"); - -module_param_named(debug, tm6000_debug, int, 0444); -MODULE_PARM_DESC(debug, "activates debug info"); - -module_param(vid_limit, int, 0644); -MODULE_PARM_DESC(vid_limit, "capture memory limit in megabytes"); - -module_param(keep_urb, bool, 0); -MODULE_PARM_DESC(keep_urb, "Keep urb buffers allocated even when the device is closed by the user"); diff --git a/drivers/staging/media/deprecated/tm6000/tm6000.h b/drivers/staging/media/deprecated/tm6000/tm6000.h deleted file mode 100644 index c08c95312739..000000000000 --- a/drivers/staging/media/deprecated/tm6000/tm6000.h +++ /dev/null @@ -1,396 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -/* - * tm6000.h - driver for TM5600/TM6000/TM6010 USB video capture devices - * - * Copyright (c) 2006-2007 Mauro Carvalho Chehab - * - * Copyright (c) 2007 Michel Ludwig - * - DVB-T support - */ - -#include -#include -#include -#include "tm6000-usb-isoc.h" -#include -#include -#include -#include -#include - -#include -#include -#include -#include - -/* Inputs */ -enum tm6000_itype { - TM6000_INPUT_TV = 1, - TM6000_INPUT_COMPOSITE1, - TM6000_INPUT_COMPOSITE2, - TM6000_INPUT_SVIDEO, - TM6000_INPUT_DVB, - TM6000_INPUT_RADIO, -}; - -enum tm6000_mux { - TM6000_VMUX_VIDEO_A = 1, - TM6000_VMUX_VIDEO_B, - TM6000_VMUX_VIDEO_AB, - TM6000_AMUX_ADC1, - TM6000_AMUX_ADC2, - TM6000_AMUX_SIF1, - TM6000_AMUX_SIF2, - TM6000_AMUX_I2S, -}; - -enum tm6000_devtype { - TM6000 = 0, - TM5600, - TM6010, -}; - -struct tm6000_input { - enum tm6000_itype type; - enum tm6000_mux vmux; - enum tm6000_mux amux; - unsigned int v_gpio; - unsigned int a_gpio; -}; - -/* ------------------------------------------------------------------ - * Basic structures - * ------------------------------------------------------------------ - */ - -struct tm6000_fmt { - u32 fourcc; /* v4l2 format id */ - int depth; -}; - -/* buffer for one video frame */ -struct tm6000_buffer { - /* common v4l buffer stuff -- must be first */ - struct videobuf_buffer vb; - - struct tm6000_fmt *fmt; -}; - -struct tm6000_dmaqueue { - struct list_head active; - struct list_head queued; - - /* thread for generating video stream*/ - struct task_struct *kthread; - wait_queue_head_t wq; - /* Counters to control fps rate */ - int frame; - int ini_jiffies; -}; - -/* device states */ -enum tm6000_core_state { - DEV_INITIALIZED = 0x01, - DEV_DISCONNECTED = 0x02, - DEV_MISCONFIGURED = 0x04, -}; - -/* io methods */ -enum tm6000_io_method { - IO_NONE, - IO_READ, - IO_MMAP, -}; - -enum tm6000_mode { - TM6000_MODE_UNKNOWN = 0, - TM6000_MODE_ANALOG, - TM6000_MODE_DIGITAL, -}; - -struct tm6000_gpio { - int tuner_reset; - int tuner_on; - int demod_reset; - int demod_on; - int power_led; - int dvb_led; - int ir; -}; - -struct tm6000_capabilities { - unsigned int has_tuner:1; - unsigned int has_tda9874:1; - unsigned int has_dvb:1; - unsigned int has_zl10353:1; - unsigned int has_eeprom:1; - unsigned int has_remote:1; - unsigned int has_radio:1; -}; - -struct tm6000_dvb { - struct dvb_adapter adapter; - struct dvb_demux demux; - struct dvb_frontend *frontend; - struct dmxdev dmxdev; - unsigned int streams; - struct urb *bulk_urb; - struct mutex mutex; -}; - -struct snd_tm6000_card { - struct snd_card *card; - spinlock_t reg_lock; - struct tm6000_core *core; - struct snd_pcm_substream *substream; - - /* temporary data for buffer fill processing */ - unsigned buf_pos; - unsigned period_pos; -}; - -struct tm6000_endpoint { - struct usb_host_endpoint *endp; - __u8 bInterfaceNumber; - __u8 bAlternateSetting; - unsigned maxsize; -}; - -#define TM6000_QUIRK_NO_USB_DELAY (1 << 0) - -struct tm6000_core { - /* generic device properties */ - char name[30]; /* name (including minor) of the device */ - int model; /* index in the device_data struct */ - int devno; /* marks the number of this device */ - enum tm6000_devtype dev_type; /* type of device */ - unsigned char eedata[256]; /* Eeprom data */ - unsigned eedata_size; /* Size of the eeprom info */ - - v4l2_std_id norm; /* Current norm */ - int width, height; /* Selected resolution */ - - enum tm6000_core_state state; - - /* Device Capabilities*/ - struct tm6000_capabilities caps; - - /* Used to load alsa/dvb */ - struct work_struct request_module_wk; - - /* Tuner configuration */ - int tuner_type; /* type of the tuner */ - int tuner_addr; /* tuner address */ - - struct tm6000_gpio gpio; - - char *ir_codes; - - __u8 radio; - - /* Demodulator configuration */ - int demod_addr; /* demodulator address */ - - int audio_bitrate; - /* i2c i/o */ - struct i2c_adapter i2c_adap; - struct i2c_client i2c_client; - - - /* extension */ - struct list_head devlist; - - /* video for linux */ - int users; - - /* various device info */ - struct tm6000_fh *resources; /* Points to fh that is streaming */ - bool is_res_read; - - struct video_device vfd; - struct video_device radio_dev; - struct tm6000_dmaqueue vidq; - struct v4l2_device v4l2_dev; - struct v4l2_ctrl_handler ctrl_handler; - struct v4l2_ctrl_handler radio_ctrl_handler; - - int input; - struct tm6000_input vinput[3]; /* video input */ - struct tm6000_input rinput; /* radio input */ - - int freq; - unsigned int fourcc; - - enum tm6000_mode mode; - - int ctl_mute; /* audio */ - int ctl_volume; - int amode; - - /* DVB-T support */ - struct tm6000_dvb *dvb; - - /* audio support */ - struct snd_tm6000_card *adev; - struct work_struct wq_trigger; /* Trigger to start/stop audio for alsa module */ - atomic_t stream_started; /* stream should be running if true */ - - struct tm6000_IR *ir; - - /* locks */ - struct mutex lock; - struct mutex usb_lock; - - /* usb transfer */ - struct usb_device *udev; /* the usb device */ - - struct tm6000_endpoint bulk_in, bulk_out, isoc_in, isoc_out; - struct tm6000_endpoint int_in, int_out; - - /* scaler!=0 if scaler is active*/ - int scaler; - - /* Isoc control struct */ - struct usb_isoc_ctl isoc_ctl; - - spinlock_t slock; - - /* urb dma buffers */ - char **urb_buffer; - dma_addr_t *urb_dma; - unsigned int urb_size; - - unsigned long quirks; -}; - -enum tm6000_ops_type { - TM6000_AUDIO = 0x10, - TM6000_DVB = 0x20, -}; - -struct tm6000_ops { - struct list_head next; - char *name; - enum tm6000_ops_type type; - int (*init)(struct tm6000_core *); - int (*fini)(struct tm6000_core *); - int (*fillbuf)(struct tm6000_core *, char *buf, int size); -}; - -struct tm6000_fh { - struct v4l2_fh fh; - struct tm6000_core *dev; - unsigned int radio; - - /* video capture */ - struct tm6000_fmt *fmt; - unsigned int width, height; - struct videobuf_queue vb_vidq; - - enum v4l2_buf_type type; -}; - -#define TM6000_STD (V4L2_STD_PAL|V4L2_STD_PAL_N|V4L2_STD_PAL_Nc| \ - V4L2_STD_PAL_M|V4L2_STD_PAL_60|V4L2_STD_NTSC_M| \ - V4L2_STD_NTSC_M_JP|V4L2_STD_SECAM) - -/* In tm6000-cards.c */ - -int tm6000_tuner_callback(void *ptr, int component, int command, int arg); -int tm6000_xc5000_callback(void *ptr, int component, int command, int arg); -int tm6000_cards_setup(struct tm6000_core *dev); -void tm6000_flash_led(struct tm6000_core *dev, u8 state); - -/* In tm6000-core.c */ - -int tm6000_read_write_usb(struct tm6000_core *dev, u8 reqtype, u8 req, - u16 value, u16 index, u8 *buf, u16 len); -int tm6000_get_reg(struct tm6000_core *dev, u8 req, u16 value, u16 index); -int tm6000_get_reg16(struct tm6000_core *dev, u8 req, u16 value, u16 index); -int tm6000_get_reg32(struct tm6000_core *dev, u8 req, u16 value, u16 index); -int tm6000_set_reg(struct tm6000_core *dev, u8 req, u16 value, u16 index); -int tm6000_set_reg_mask(struct tm6000_core *dev, u8 req, u16 value, - u16 index, u16 mask); -int tm6000_i2c_reset(struct tm6000_core *dev, u16 tsleep); -int tm6000_init(struct tm6000_core *dev); -int tm6000_reset(struct tm6000_core *dev); - -int tm6000_init_analog_mode(struct tm6000_core *dev); -int tm6000_init_digital_mode(struct tm6000_core *dev); -int tm6000_set_audio_bitrate(struct tm6000_core *dev, int bitrate); -int tm6000_set_audio_rinput(struct tm6000_core *dev); -int tm6000_tvaudio_set_mute(struct tm6000_core *dev, u8 mute); -void tm6000_set_volume(struct tm6000_core *dev, int vol); - -int tm6000_v4l2_register(struct tm6000_core *dev); -int tm6000_v4l2_unregister(struct tm6000_core *dev); -int tm6000_v4l2_exit(void); -void tm6000_set_fourcc_format(struct tm6000_core *dev); - -void tm6000_remove_from_devlist(struct tm6000_core *dev); -void tm6000_add_into_devlist(struct tm6000_core *dev); -int tm6000_register_extension(struct tm6000_ops *ops); -void tm6000_unregister_extension(struct tm6000_ops *ops); -void tm6000_init_extension(struct tm6000_core *dev); -void tm6000_close_extension(struct tm6000_core *dev); -int tm6000_call_fillbuf(struct tm6000_core *dev, enum tm6000_ops_type type, - char *buf, int size); - - -/* In tm6000-stds.c */ -void tm6000_get_std_res(struct tm6000_core *dev); -int tm6000_set_standard(struct tm6000_core *dev); - -/* In tm6000-i2c.c */ -int tm6000_i2c_register(struct tm6000_core *dev); -int tm6000_i2c_unregister(struct tm6000_core *dev); - -/* In tm6000-queue.c */ - -int tm6000_v4l2_mmap(struct file *filp, struct vm_area_struct *vma); - -int tm6000_vidioc_streamon(struct file *file, void *priv, - enum v4l2_buf_type i); -int tm6000_vidioc_streamoff(struct file *file, void *priv, - enum v4l2_buf_type i); -int tm6000_vidioc_reqbufs(struct file *file, void *priv, - struct v4l2_requestbuffers *rb); -int tm6000_vidioc_querybuf(struct file *file, void *priv, - struct v4l2_buffer *b); -int tm6000_vidioc_qbuf(struct file *file, void *priv, struct v4l2_buffer *b); -int tm6000_vidioc_dqbuf(struct file *file, void *priv, struct v4l2_buffer *b); -ssize_t tm6000_v4l2_read(struct file *filp, char __user * buf, size_t count, - loff_t *f_pos); -unsigned int tm6000_v4l2_poll(struct file *file, - struct poll_table_struct *wait); -int tm6000_queue_init(struct tm6000_core *dev); - -/* In tm6000-alsa.c */ -/*int tm6000_audio_init(struct tm6000_core *dev, int idx);*/ - -/* In tm6000-input.c */ -int tm6000_ir_init(struct tm6000_core *dev); -int tm6000_ir_fini(struct tm6000_core *dev); -void tm6000_ir_wait(struct tm6000_core *dev, u8 state); -int tm6000_ir_int_start(struct tm6000_core *dev); -void tm6000_ir_int_stop(struct tm6000_core *dev); - -/* Debug stuff */ - -extern int tm6000_debug; - -#define dprintk(dev, level, fmt, arg...) do {\ - if (tm6000_debug & level) \ - printk(KERN_INFO "(%lu) %s %s :"fmt, jiffies, \ - dev->name, __func__ , ##arg); } while (0) - -#define V4L2_DEBUG_REG 0x0004 -#define V4L2_DEBUG_I2C 0x0008 -#define V4L2_DEBUG_QUEUE 0x0010 -#define V4L2_DEBUG_ISOC 0x0020 -#define V4L2_DEBUG_RES_LOCK 0x0040 /* Resource locking */ -#define V4L2_DEBUG_OPEN 0x0080 /* video open/close debug */ - -#define tm6000_err(fmt, arg...) do {\ - printk(KERN_ERR "tm6000 %s :"fmt, \ - __func__ , ##arg); } while (0) From patchwork Wed Jan 11 10:52:54 2023 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Hans Verkuil X-Patchwork-Id: 13096407 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id 0A150C6379F for ; Wed, 11 Jan 2023 10:54:19 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S238776AbjAKKxz (ORCPT ); Wed, 11 Jan 2023 05:53:55 -0500 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:37230 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S229732AbjAKKxQ (ORCPT ); Wed, 11 Jan 2023 05:53:16 -0500 Received: from dfw.source.kernel.org (dfw.source.kernel.org [IPv6:2604:1380:4641:c500::1]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 4EC99117E for ; Wed, 11 Jan 2023 02:53:13 -0800 (PST) Received: from smtp.kernel.org (relay.kernel.org [52.25.139.140]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by dfw.source.kernel.org (Postfix) with ESMTPS id B245761C1E for ; Wed, 11 Jan 2023 10:53:12 +0000 (UTC) Received: by smtp.kernel.org (Postfix) with ESMTPSA id 5E72EC433D2; Wed, 11 Jan 2023 10:53:11 +0000 (UTC) From: Hans Verkuil To: linux-media@vger.kernel.org Cc: Lad Prabhakar , Hans Verkuil Subject: [PATCH 09/13] ttpci: remove deprecated driver Date: Wed, 11 Jan 2023 11:52:54 +0100 Message-Id: <20230111105258.547471-10-hverkuil-cisco@xs4all.nl> X-Mailer: git-send-email 2.39.0 In-Reply-To: <20230111105258.547471-1-hverkuil-cisco@xs4all.nl> References: <20230111105258.547471-1-hverkuil-cisco@xs4all.nl> MIME-Version: 1.0 Precedence: bulk List-ID: X-Mailing-List: linux-media@vger.kernel.org The ttpci driver does not use the vb2 framework for streaming video, instead it uses the old vb1 framework and nobody stepped in to convert this driver to vb2. The hardware is very old, so the decision was made to remove it altogether since we want to get rid of the old vb1 framework. Signed-off-by: Hans Verkuil --- .../admin-guide/media/pci-cardlist.rst | 1 - .../staging/media/deprecated/saa7146/Kconfig | 1 - .../staging/media/deprecated/saa7146/Makefile | 2 +- .../media/deprecated/saa7146/ttpci/Kconfig | 95 - .../media/deprecated/saa7146/ttpci/Makefile | 13 - .../media/deprecated/saa7146/ttpci/TODO | 7 - .../deprecated/saa7146/ttpci/budget-av.c | 1622 ----------------- .../deprecated/saa7146/ttpci/budget-ci.c | 1574 ---------------- .../deprecated/saa7146/ttpci/budget-core.c | 603 ------ .../media/deprecated/saa7146/ttpci/budget.c | 883 --------- .../media/deprecated/saa7146/ttpci/budget.h | 129 -- 11 files changed, 1 insertion(+), 4929 deletions(-) delete mode 100644 drivers/staging/media/deprecated/saa7146/ttpci/Kconfig delete mode 100644 drivers/staging/media/deprecated/saa7146/ttpci/Makefile delete mode 100644 drivers/staging/media/deprecated/saa7146/ttpci/TODO delete mode 100644 drivers/staging/media/deprecated/saa7146/ttpci/budget-av.c delete mode 100644 drivers/staging/media/deprecated/saa7146/ttpci/budget-ci.c delete mode 100644 drivers/staging/media/deprecated/saa7146/ttpci/budget-core.c delete mode 100644 drivers/staging/media/deprecated/saa7146/ttpci/budget.c delete mode 100644 drivers/staging/media/deprecated/saa7146/ttpci/budget.h diff --git a/Documentation/admin-guide/media/pci-cardlist.rst b/Documentation/admin-guide/media/pci-cardlist.rst index 42528795d4da..aca13c7e8508 100644 --- a/Documentation/admin-guide/media/pci-cardlist.rst +++ b/Documentation/admin-guide/media/pci-cardlist.rst @@ -67,7 +67,6 @@ cx88xx Conexant 2388x (bt878 successor) ddbridge Digital Devices bridge dm1105 SDMC DM1105 based PCI cards dt3155 DT3155 frame grabber -dvb-ttpci AV7110 cards earth-pt1 PT1 cards earth-pt3 Earthsoft PT3 cards hexium_gemini Hexium Gemini frame grabber diff --git a/drivers/staging/media/deprecated/saa7146/Kconfig b/drivers/staging/media/deprecated/saa7146/Kconfig index d0cb52164ff8..3d2e2120788e 100644 --- a/drivers/staging/media/deprecated/saa7146/Kconfig +++ b/drivers/staging/media/deprecated/saa7146/Kconfig @@ -1,4 +1,3 @@ # SPDX-License-Identifier: GPL-2.0 source "drivers/staging/media/deprecated/saa7146/common/Kconfig" source "drivers/staging/media/deprecated/saa7146/saa7146/Kconfig" -source "drivers/staging/media/deprecated/saa7146/ttpci/Kconfig" diff --git a/drivers/staging/media/deprecated/saa7146/Makefile b/drivers/staging/media/deprecated/saa7146/Makefile index 9d99fdedf813..71866795174e 100644 --- a/drivers/staging/media/deprecated/saa7146/Makefile +++ b/drivers/staging/media/deprecated/saa7146/Makefile @@ -1,2 +1,2 @@ # SPDX-License-Identifier: GPL-2.0-only -obj-y += common/ saa7146/ ttpci/ +obj-y += common/ saa7146/ diff --git a/drivers/staging/media/deprecated/saa7146/ttpci/Kconfig b/drivers/staging/media/deprecated/saa7146/ttpci/Kconfig deleted file mode 100644 index 8c85ed58e938..000000000000 --- a/drivers/staging/media/deprecated/saa7146/ttpci/Kconfig +++ /dev/null @@ -1,95 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0-only -config DVB_BUDGET_CORE - tristate "SAA7146 DVB cards (aka Budget, Nova-PCI) (DEPRECATED)" - depends on DVB_CORE && PCI && I2C - select VIDEO_SAA7146 - select TTPCI_EEPROM - help - Support for simple SAA7146 based DVB cards - (so called Budget- or Nova-PCI cards) without onboard - MPEG2 decoder. - -config DVB_BUDGET - tristate "Budget cards (DEPRECATED)" - depends on DVB_BUDGET_CORE && I2C - select DVB_STV0299 if MEDIA_SUBDRV_AUTOSELECT - select DVB_VES1X93 if MEDIA_SUBDRV_AUTOSELECT - select DVB_VES1820 if MEDIA_SUBDRV_AUTOSELECT - select DVB_L64781 if MEDIA_SUBDRV_AUTOSELECT - select DVB_TDA8083 if MEDIA_SUBDRV_AUTOSELECT - select DVB_S5H1420 if MEDIA_SUBDRV_AUTOSELECT - select DVB_TDA10086 if MEDIA_SUBDRV_AUTOSELECT - select DVB_TDA826X if MEDIA_SUBDRV_AUTOSELECT - select DVB_LNBP21 if MEDIA_SUBDRV_AUTOSELECT - select DVB_TDA1004X if MEDIA_SUBDRV_AUTOSELECT - select DVB_ISL6423 if MEDIA_SUBDRV_AUTOSELECT - select DVB_STV090x if MEDIA_SUBDRV_AUTOSELECT - select DVB_STV6110x if MEDIA_SUBDRV_AUTOSELECT - help - Support for simple SAA7146 based DVB cards (so called Budget- - or Nova-PCI cards) without onboard MPEG2 decoder, and without - analog inputs or an onboard Common Interface connector. - - This driver is deprecated and is scheduled for removal by - the beginning of 2023. See the TODO file for more information. - - Say Y if you own such a card and want to use it. - - To compile this driver as a module, choose M here: the - module will be called budget. - -config DVB_BUDGET_CI - tristate "Budget cards with onboard CI connector (DEPRECATED)" - depends on DVB_BUDGET_CORE && I2C - select DVB_STV0297 if MEDIA_SUBDRV_AUTOSELECT - select DVB_STV0299 if MEDIA_SUBDRV_AUTOSELECT - select DVB_TDA1004X if MEDIA_SUBDRV_AUTOSELECT - select DVB_STB0899 if MEDIA_SUBDRV_AUTOSELECT - select DVB_STB6100 if MEDIA_SUBDRV_AUTOSELECT - select DVB_LNBP21 if MEDIA_SUBDRV_AUTOSELECT - select DVB_STV0288 if MEDIA_SUBDRV_AUTOSELECT - select DVB_STB6000 if MEDIA_SUBDRV_AUTOSELECT - select DVB_TDA10023 if MEDIA_SUBDRV_AUTOSELECT - select MEDIA_TUNER_TDA827X if MEDIA_SUBDRV_AUTOSELECT - depends on RC_CORE - help - Support for simple SAA7146 based DVB cards - (so called Budget- or Nova-PCI cards) without onboard - MPEG2 decoder, but with onboard Common Interface connector. - - Note: The Common Interface is not yet supported by this driver - due to lack of information from the vendor. - - This driver is deprecated and is scheduled for removal by - the beginning of 2023. See the TODO file for more information. - - Say Y if you own such a card and want to use it. - - To compile this driver as a module, choose M here: the - module will be called budget-ci. - -config DVB_BUDGET_AV - tristate "Budget cards with analog video inputs (DEPRECATED)" - depends on DVB_BUDGET_CORE && I2C - select VIDEO_SAA7146_VV - depends on VIDEO_DEV # dependencies of VIDEO_SAA7146_VV - select DVB_PLL if MEDIA_SUBDRV_AUTOSELECT - select DVB_STV0299 if MEDIA_SUBDRV_AUTOSELECT - select DVB_TDA1004X if MEDIA_SUBDRV_AUTOSELECT - select DVB_TDA10021 if MEDIA_SUBDRV_AUTOSELECT - select DVB_TDA10023 if MEDIA_SUBDRV_AUTOSELECT - select DVB_STB0899 if MEDIA_SUBDRV_AUTOSELECT - select DVB_TDA8261 if MEDIA_SUBDRV_AUTOSELECT - select DVB_TUA6100 if MEDIA_SUBDRV_AUTOSELECT - help - Support for simple SAA7146 based DVB cards - (so called Budget- or Nova-PCI cards) without onboard - MPEG2 decoder, but with one or more analog video inputs. - - This driver is deprecated and is scheduled for removal by - the beginning of 2023. See the TODO file for more information. - - Say Y if you own such a card and want to use it. - - To compile this driver as a module, choose M here: the - module will be called budget-av. diff --git a/drivers/staging/media/deprecated/saa7146/ttpci/Makefile b/drivers/staging/media/deprecated/saa7146/ttpci/Makefile deleted file mode 100644 index b0708f6e40cc..000000000000 --- a/drivers/staging/media/deprecated/saa7146/ttpci/Makefile +++ /dev/null @@ -1,13 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0 -# -# Makefile for the kernel SAA7146 FULL TS DVB device driver -# - -obj-$(CONFIG_DVB_BUDGET_CORE) += budget-core.o -obj-$(CONFIG_DVB_BUDGET) += budget.o -obj-$(CONFIG_DVB_BUDGET_AV) += budget-av.o -obj-$(CONFIG_DVB_BUDGET_CI) += budget-ci.o - -ccflags-y += -I $(srctree)/drivers/media/dvb-frontends/ -ccflags-y += -I $(srctree)/drivers/media/tuners -ccflags-y += -I $(srctree)/drivers/media/common diff --git a/drivers/staging/media/deprecated/saa7146/ttpci/TODO b/drivers/staging/media/deprecated/saa7146/ttpci/TODO deleted file mode 100644 index c9ae2ec79cea..000000000000 --- a/drivers/staging/media/deprecated/saa7146/ttpci/TODO +++ /dev/null @@ -1,7 +0,0 @@ -The saa7146-based drivers are one of the few drivers still not using -the vb2 framework, so these drivers are now deprecated with the intent of -removing them altogether by the beginning of 2023. - -In order to keep these drivers they have to be converted to vb2. -If someone is interested in doing this work, then contact the -linux-media mailinglist (https://linuxtv.org/lists.php). diff --git a/drivers/staging/media/deprecated/saa7146/ttpci/budget-av.c b/drivers/staging/media/deprecated/saa7146/ttpci/budget-av.c deleted file mode 100644 index 0c61a2dec221..000000000000 --- a/drivers/staging/media/deprecated/saa7146/ttpci/budget-av.c +++ /dev/null @@ -1,1622 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/* - * budget-av.c: driver for the SAA7146 based Budget DVB cards - * with analog video in - * - * Compiled from various sources by Michael Hunold - * - * CI interface support (c) 2004 Olivier Gournet & - * Andrew de Quincey - * - * Copyright (C) 2002 Ralph Metzler - * - * Copyright (C) 1999-2002 Ralph Metzler - * & Marcus Metzler for convergence integrated media GmbH - * - * the project's page is at https://linuxtv.org - */ - -#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt - -#include "budget.h" -#include "stv0299.h" -#include "stb0899_drv.h" -#include "stb0899_reg.h" -#include "stb0899_cfg.h" -#include "tda8261.h" -#include "tda8261_cfg.h" -#include "tda1002x.h" -#include "tda1004x.h" -#include "tua6100.h" -#include "dvb-pll.h" -#include "../common/saa7146_vv.h" -#include -#include -#include -#include -#include -#include - -#include - -#define DEBICICAM 0x02420000 - -#define SLOTSTATUS_NONE 1 -#define SLOTSTATUS_PRESENT 2 -#define SLOTSTATUS_RESET 4 -#define SLOTSTATUS_READY 8 -#define SLOTSTATUS_OCCUPIED (SLOTSTATUS_PRESENT|SLOTSTATUS_RESET|SLOTSTATUS_READY) - -DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); - -struct budget_av { - struct budget budget; - struct video_device vd; - int cur_input; - int has_saa7113; - struct tasklet_struct ciintf_irq_tasklet; - int slot_status; - struct dvb_ca_en50221 ca; - u8 reinitialise_demod:1; -}; - -static int ciintf_slot_shutdown(struct dvb_ca_en50221 *ca, int slot); - - -/* GPIO Connections: - * 0 - Vcc/Reset (Reset is controlled by capacitor). Resets the frontend *AS WELL*! - * 1 - CI memory select 0=>IO memory, 1=>Attribute Memory - * 2 - CI Card Enable (Active Low) - * 3 - CI Card Detect - */ - -/**************************************************************************** - * INITIALIZATION - ****************************************************************************/ - -static u8 i2c_readreg(struct i2c_adapter *i2c, u8 id, u8 reg) -{ - u8 mm1[] = { 0x00 }; - u8 mm2[] = { 0x00 }; - struct i2c_msg msgs[2]; - - msgs[0].flags = 0; - msgs[1].flags = I2C_M_RD; - msgs[0].addr = msgs[1].addr = id / 2; - mm1[0] = reg; - msgs[0].len = 1; - msgs[1].len = 1; - msgs[0].buf = mm1; - msgs[1].buf = mm2; - - i2c_transfer(i2c, msgs, 2); - - return mm2[0]; -} - -static int i2c_readregs(struct i2c_adapter *i2c, u8 id, u8 reg, u8 * buf, u8 len) -{ - u8 mm1[] = { reg }; - struct i2c_msg msgs[2] = { - {.addr = id / 2,.flags = 0,.buf = mm1,.len = 1}, - {.addr = id / 2,.flags = I2C_M_RD,.buf = buf,.len = len} - }; - - if (i2c_transfer(i2c, msgs, 2) != 2) - return -EIO; - - return 0; -} - -static int i2c_writereg(struct i2c_adapter *i2c, u8 id, u8 reg, u8 val) -{ - u8 msg[2] = { reg, val }; - struct i2c_msg msgs; - - msgs.flags = 0; - msgs.addr = id / 2; - msgs.len = 2; - msgs.buf = msg; - return i2c_transfer(i2c, &msgs, 1); -} - -static int ciintf_read_attribute_mem(struct dvb_ca_en50221 *ca, int slot, int address) -{ - struct budget_av *budget_av = (struct budget_av *) ca->data; - int result; - - if (slot != 0) - return -EINVAL; - - saa7146_setgpio(budget_av->budget.dev, 1, SAA7146_GPIO_OUTHI); - udelay(1); - - result = ttpci_budget_debiread(&budget_av->budget, DEBICICAM, address & 0xfff, 1, 0, 1); - if (result == -ETIMEDOUT) { - ciintf_slot_shutdown(ca, slot); - pr_info("cam ejected 1\n"); - } - return result; -} - -static int ciintf_write_attribute_mem(struct dvb_ca_en50221 *ca, int slot, int address, u8 value) -{ - struct budget_av *budget_av = (struct budget_av *) ca->data; - int result; - - if (slot != 0) - return -EINVAL; - - saa7146_setgpio(budget_av->budget.dev, 1, SAA7146_GPIO_OUTHI); - udelay(1); - - result = ttpci_budget_debiwrite(&budget_av->budget, DEBICICAM, address & 0xfff, 1, value, 0, 1); - if (result == -ETIMEDOUT) { - ciintf_slot_shutdown(ca, slot); - pr_info("cam ejected 2\n"); - } - return result; -} - -static int ciintf_read_cam_control(struct dvb_ca_en50221 *ca, int slot, u8 address) -{ - struct budget_av *budget_av = (struct budget_av *) ca->data; - int result; - - if (slot != 0) - return -EINVAL; - - saa7146_setgpio(budget_av->budget.dev, 1, SAA7146_GPIO_OUTLO); - udelay(1); - - result = ttpci_budget_debiread(&budget_av->budget, DEBICICAM, address & 3, 1, 0, 0); - if (result == -ETIMEDOUT) { - ciintf_slot_shutdown(ca, slot); - pr_info("cam ejected 3\n"); - return -ETIMEDOUT; - } - return result; -} - -static int ciintf_write_cam_control(struct dvb_ca_en50221 *ca, int slot, u8 address, u8 value) -{ - struct budget_av *budget_av = (struct budget_av *) ca->data; - int result; - - if (slot != 0) - return -EINVAL; - - saa7146_setgpio(budget_av->budget.dev, 1, SAA7146_GPIO_OUTLO); - udelay(1); - - result = ttpci_budget_debiwrite(&budget_av->budget, DEBICICAM, address & 3, 1, value, 0, 0); - if (result == -ETIMEDOUT) { - ciintf_slot_shutdown(ca, slot); - pr_info("cam ejected 5\n"); - } - return result; -} - -static int ciintf_slot_reset(struct dvb_ca_en50221 *ca, int slot) -{ - struct budget_av *budget_av = (struct budget_av *) ca->data; - struct saa7146_dev *saa = budget_av->budget.dev; - - if (slot != 0) - return -EINVAL; - - dprintk(1, "ciintf_slot_reset\n"); - budget_av->slot_status = SLOTSTATUS_RESET; - - saa7146_setgpio(saa, 2, SAA7146_GPIO_OUTHI); /* disable card */ - - saa7146_setgpio(saa, 0, SAA7146_GPIO_OUTHI); /* Vcc off */ - msleep(2); - saa7146_setgpio(saa, 0, SAA7146_GPIO_OUTLO); /* Vcc on */ - msleep(20); /* 20 ms Vcc settling time */ - - saa7146_setgpio(saa, 2, SAA7146_GPIO_OUTLO); /* enable card */ - ttpci_budget_set_video_port(saa, BUDGET_VIDEO_PORTB); - msleep(20); - - /* reinitialise the frontend if necessary */ - if (budget_av->reinitialise_demod) - dvb_frontend_reinitialise(budget_av->budget.dvb_frontend); - - return 0; -} - -static int ciintf_slot_shutdown(struct dvb_ca_en50221 *ca, int slot) -{ - struct budget_av *budget_av = (struct budget_av *) ca->data; - struct saa7146_dev *saa = budget_av->budget.dev; - - if (slot != 0) - return -EINVAL; - - dprintk(1, "ciintf_slot_shutdown\n"); - - ttpci_budget_set_video_port(saa, BUDGET_VIDEO_PORTB); - budget_av->slot_status = SLOTSTATUS_NONE; - - return 0; -} - -static int ciintf_slot_ts_enable(struct dvb_ca_en50221 *ca, int slot) -{ - struct budget_av *budget_av = (struct budget_av *) ca->data; - struct saa7146_dev *saa = budget_av->budget.dev; - - if (slot != 0) - return -EINVAL; - - dprintk(1, "ciintf_slot_ts_enable: %d\n", budget_av->slot_status); - - ttpci_budget_set_video_port(saa, BUDGET_VIDEO_PORTA); - - return 0; -} - -static int ciintf_poll_slot_status(struct dvb_ca_en50221 *ca, int slot, int open) -{ - struct budget_av *budget_av = (struct budget_av *) ca->data; - struct saa7146_dev *saa = budget_av->budget.dev; - int result; - - if (slot != 0) - return -EINVAL; - - /* test the card detect line - needs to be done carefully - * since it never goes high for some CAMs on this interface (e.g. topuptv) */ - if (budget_av->slot_status == SLOTSTATUS_NONE) { - saa7146_setgpio(saa, 3, SAA7146_GPIO_INPUT); - udelay(1); - if (saa7146_read(saa, PSR) & MASK_06) { - if (budget_av->slot_status == SLOTSTATUS_NONE) { - budget_av->slot_status = SLOTSTATUS_PRESENT; - pr_info("cam inserted A\n"); - } - } - saa7146_setgpio(saa, 3, SAA7146_GPIO_OUTLO); - } - - /* We also try and read from IO memory to work round the above detection bug. If - * there is no CAM, we will get a timeout. Only done if there is no cam - * present, since this test actually breaks some cams :( - * - * if the CI interface is not open, we also do the above test since we - * don't care if the cam has problems - we'll be resetting it on open() anyway */ - if ((budget_av->slot_status == SLOTSTATUS_NONE) || (!open)) { - saa7146_setgpio(budget_av->budget.dev, 1, SAA7146_GPIO_OUTLO); - result = ttpci_budget_debiread(&budget_av->budget, DEBICICAM, 0, 1, 0, 1); - if ((result >= 0) && (budget_av->slot_status == SLOTSTATUS_NONE)) { - budget_av->slot_status = SLOTSTATUS_PRESENT; - pr_info("cam inserted B\n"); - } else if (result < 0) { - if (budget_av->slot_status != SLOTSTATUS_NONE) { - ciintf_slot_shutdown(ca, slot); - pr_info("cam ejected 5\n"); - return 0; - } - } - } - - /* read from attribute memory in reset/ready state to know when the CAM is ready */ - if (budget_av->slot_status == SLOTSTATUS_RESET) { - result = ciintf_read_attribute_mem(ca, slot, 0); - if (result == 0x1d) { - budget_av->slot_status = SLOTSTATUS_READY; - } - } - - /* work out correct return code */ - if (budget_av->slot_status != SLOTSTATUS_NONE) { - if (budget_av->slot_status & SLOTSTATUS_READY) { - return DVB_CA_EN50221_POLL_CAM_PRESENT | DVB_CA_EN50221_POLL_CAM_READY; - } - return DVB_CA_EN50221_POLL_CAM_PRESENT; - } - return 0; -} - -static int ciintf_init(struct budget_av *budget_av) -{ - struct saa7146_dev *saa = budget_av->budget.dev; - int result; - - memset(&budget_av->ca, 0, sizeof(struct dvb_ca_en50221)); - - saa7146_setgpio(saa, 0, SAA7146_GPIO_OUTLO); - saa7146_setgpio(saa, 1, SAA7146_GPIO_OUTLO); - saa7146_setgpio(saa, 2, SAA7146_GPIO_OUTLO); - saa7146_setgpio(saa, 3, SAA7146_GPIO_OUTLO); - - /* Enable DEBI pins */ - saa7146_write(saa, MC1, MASK_27 | MASK_11); - - /* register CI interface */ - budget_av->ca.owner = THIS_MODULE; - budget_av->ca.read_attribute_mem = ciintf_read_attribute_mem; - budget_av->ca.write_attribute_mem = ciintf_write_attribute_mem; - budget_av->ca.read_cam_control = ciintf_read_cam_control; - budget_av->ca.write_cam_control = ciintf_write_cam_control; - budget_av->ca.slot_reset = ciintf_slot_reset; - budget_av->ca.slot_shutdown = ciintf_slot_shutdown; - budget_av->ca.slot_ts_enable = ciintf_slot_ts_enable; - budget_av->ca.poll_slot_status = ciintf_poll_slot_status; - budget_av->ca.data = budget_av; - budget_av->budget.ci_present = 1; - budget_av->slot_status = SLOTSTATUS_NONE; - - if ((result = dvb_ca_en50221_init(&budget_av->budget.dvb_adapter, - &budget_av->ca, 0, 1)) != 0) { - pr_err("ci initialisation failed\n"); - goto error; - } - - pr_info("ci interface initialised\n"); - return 0; - -error: - saa7146_write(saa, MC1, MASK_27); - return result; -} - -static void ciintf_deinit(struct budget_av *budget_av) -{ - struct saa7146_dev *saa = budget_av->budget.dev; - - saa7146_setgpio(saa, 0, SAA7146_GPIO_INPUT); - saa7146_setgpio(saa, 1, SAA7146_GPIO_INPUT); - saa7146_setgpio(saa, 2, SAA7146_GPIO_INPUT); - saa7146_setgpio(saa, 3, SAA7146_GPIO_INPUT); - - /* release the CA device */ - dvb_ca_en50221_release(&budget_av->ca); - - /* disable DEBI pins */ - saa7146_write(saa, MC1, MASK_27); -} - - -static const u8 saa7113_tab[] = { - 0x01, 0x08, - 0x02, 0xc0, - 0x03, 0x33, - 0x04, 0x00, - 0x05, 0x00, - 0x06, 0xeb, - 0x07, 0xe0, - 0x08, 0x28, - 0x09, 0x00, - 0x0a, 0x80, - 0x0b, 0x47, - 0x0c, 0x40, - 0x0d, 0x00, - 0x0e, 0x01, - 0x0f, 0x44, - - 0x10, 0x08, - 0x11, 0x0c, - 0x12, 0x7b, - 0x13, 0x00, - 0x15, 0x00, 0x16, 0x00, 0x17, 0x00, - - 0x57, 0xff, - 0x40, 0x82, 0x58, 0x00, 0x59, 0x54, 0x5a, 0x07, - 0x5b, 0x83, 0x5e, 0x00, - 0xff -}; - -static int saa7113_init(struct budget_av *budget_av) -{ - struct budget *budget = &budget_av->budget; - struct saa7146_dev *saa = budget->dev; - const u8 *data = saa7113_tab; - - saa7146_setgpio(saa, 0, SAA7146_GPIO_OUTHI); - msleep(200); - - if (i2c_writereg(&budget->i2c_adap, 0x4a, 0x01, 0x08) != 1) { - dprintk(1, "saa7113 not found on KNC card\n"); - return -ENODEV; - } - - dprintk(1, "saa7113 detected and initializing\n"); - - while (*data != 0xff) { - i2c_writereg(&budget->i2c_adap, 0x4a, *data, *(data + 1)); - data += 2; - } - - dprintk(1, "saa7113 status=%02x\n", i2c_readreg(&budget->i2c_adap, 0x4a, 0x1f)); - - return 0; -} - -static int saa7113_setinput(struct budget_av *budget_av, int input) -{ - struct budget *budget = &budget_av->budget; - - if (1 != budget_av->has_saa7113) - return -ENODEV; - - if (input == 1) { - i2c_writereg(&budget->i2c_adap, 0x4a, 0x02, 0xc7); - i2c_writereg(&budget->i2c_adap, 0x4a, 0x09, 0x80); - } else if (input == 0) { - i2c_writereg(&budget->i2c_adap, 0x4a, 0x02, 0xc0); - i2c_writereg(&budget->i2c_adap, 0x4a, 0x09, 0x00); - } else - return -EINVAL; - - budget_av->cur_input = input; - return 0; -} - - -static int philips_su1278_ty_ci_set_symbol_rate(struct dvb_frontend *fe, u32 srate, u32 ratio) -{ - u8 aclk = 0; - u8 bclk = 0; - u8 m1; - - aclk = 0xb5; - if (srate < 2000000) - bclk = 0x86; - else if (srate < 5000000) - bclk = 0x89; - else if (srate < 15000000) - bclk = 0x8f; - else if (srate < 45000000) - bclk = 0x95; - - m1 = 0x14; - if (srate < 4000000) - m1 = 0x10; - - stv0299_writereg(fe, 0x13, aclk); - stv0299_writereg(fe, 0x14, bclk); - stv0299_writereg(fe, 0x1f, (ratio >> 16) & 0xff); - stv0299_writereg(fe, 0x20, (ratio >> 8) & 0xff); - stv0299_writereg(fe, 0x21, (ratio) & 0xf0); - stv0299_writereg(fe, 0x0f, 0x80 | m1); - - return 0; -} - -static int philips_su1278_ty_ci_tuner_set_params(struct dvb_frontend *fe) -{ - struct dtv_frontend_properties *c = &fe->dtv_property_cache; - u32 div; - u8 buf[4]; - struct budget *budget = (struct budget *) fe->dvb->priv; - struct i2c_msg msg = {.addr = 0x61,.flags = 0,.buf = buf,.len = sizeof(buf) }; - - if ((c->frequency < 950000) || (c->frequency > 2150000)) - return -EINVAL; - - div = (c->frequency + (125 - 1)) / 125; /* round correctly */ - buf[0] = (div >> 8) & 0x7f; - buf[1] = div & 0xff; - buf[2] = 0x80 | ((div & 0x18000) >> 10) | 4; - buf[3] = 0x20; - - if (c->symbol_rate < 4000000) - buf[3] |= 1; - - if (c->frequency < 1250000) - buf[3] |= 0; - else if (c->frequency < 1550000) - buf[3] |= 0x40; - else if (c->frequency < 2050000) - buf[3] |= 0x80; - else if (c->frequency < 2150000) - buf[3] |= 0xC0; - - if (fe->ops.i2c_gate_ctrl) - fe->ops.i2c_gate_ctrl(fe, 1); - if (i2c_transfer(&budget->i2c_adap, &msg, 1) != 1) - return -EIO; - return 0; -} - -static u8 typhoon_cinergy1200s_inittab[] = { - 0x01, 0x15, - 0x02, 0x30, - 0x03, 0x00, - 0x04, 0x7d, /* F22FR = 0x7d, F22 = f_VCO / 128 / 0x7d = 22 kHz */ - 0x05, 0x35, /* I2CT = 0, SCLT = 1, SDAT = 1 */ - 0x06, 0x40, /* DAC not used, set to high impendance mode */ - 0x07, 0x00, /* DAC LSB */ - 0x08, 0x40, /* DiSEqC off */ - 0x09, 0x00, /* FIFO */ - 0x0c, 0x51, /* OP1 ctl = Normal, OP1 val = 1 (LNB Power ON) */ - 0x0d, 0x82, /* DC offset compensation = ON, beta_agc1 = 2 */ - 0x0e, 0x23, /* alpha_tmg = 2, beta_tmg = 3 */ - 0x10, 0x3f, // AGC2 0x3d - 0x11, 0x84, - 0x12, 0xb9, - 0x15, 0xc9, // lock detector threshold - 0x16, 0x00, - 0x17, 0x00, - 0x18, 0x00, - 0x19, 0x00, - 0x1a, 0x00, - 0x1f, 0x50, - 0x20, 0x00, - 0x21, 0x00, - 0x22, 0x00, - 0x23, 0x00, - 0x28, 0x00, // out imp: normal out type: parallel FEC mode:0 - 0x29, 0x1e, // 1/2 threshold - 0x2a, 0x14, // 2/3 threshold - 0x2b, 0x0f, // 3/4 threshold - 0x2c, 0x09, // 5/6 threshold - 0x2d, 0x05, // 7/8 threshold - 0x2e, 0x01, - 0x31, 0x1f, // test all FECs - 0x32, 0x19, // viterbi and synchro search - 0x33, 0xfc, // rs control - 0x34, 0x93, // error control - 0x0f, 0x92, - 0xff, 0xff -}; - -static const struct stv0299_config typhoon_config = { - .demod_address = 0x68, - .inittab = typhoon_cinergy1200s_inittab, - .mclk = 88000000UL, - .invert = 0, - .skip_reinit = 0, - .lock_output = STV0299_LOCKOUTPUT_1, - .volt13_op0_op1 = STV0299_VOLT13_OP0, - .min_delay_ms = 100, - .set_symbol_rate = philips_su1278_ty_ci_set_symbol_rate, -}; - - -static const struct stv0299_config cinergy_1200s_config = { - .demod_address = 0x68, - .inittab = typhoon_cinergy1200s_inittab, - .mclk = 88000000UL, - .invert = 0, - .skip_reinit = 0, - .lock_output = STV0299_LOCKOUTPUT_0, - .volt13_op0_op1 = STV0299_VOLT13_OP0, - .min_delay_ms = 100, - .set_symbol_rate = philips_su1278_ty_ci_set_symbol_rate, -}; - -static const struct stv0299_config cinergy_1200s_1894_0010_config = { - .demod_address = 0x68, - .inittab = typhoon_cinergy1200s_inittab, - .mclk = 88000000UL, - .invert = 1, - .skip_reinit = 0, - .lock_output = STV0299_LOCKOUTPUT_1, - .volt13_op0_op1 = STV0299_VOLT13_OP0, - .min_delay_ms = 100, - .set_symbol_rate = philips_su1278_ty_ci_set_symbol_rate, -}; - -static int philips_cu1216_tuner_set_params(struct dvb_frontend *fe) -{ - struct dtv_frontend_properties *c = &fe->dtv_property_cache; - struct budget *budget = (struct budget *) fe->dvb->priv; - u8 buf[6]; - struct i2c_msg msg = {.addr = 0x60,.flags = 0,.buf = buf,.len = sizeof(buf) }; - int i; - -#define CU1216_IF 36125000 -#define TUNER_MUL 62500 - - u32 div = (c->frequency + CU1216_IF + TUNER_MUL / 2) / TUNER_MUL; - - buf[0] = (div >> 8) & 0x7f; - buf[1] = div & 0xff; - buf[2] = 0xce; - buf[3] = (c->frequency < 150000000 ? 0x01 : - c->frequency < 445000000 ? 0x02 : 0x04); - buf[4] = 0xde; - buf[5] = 0x20; - - if (fe->ops.i2c_gate_ctrl) - fe->ops.i2c_gate_ctrl(fe, 1); - if (i2c_transfer(&budget->i2c_adap, &msg, 1) != 1) - return -EIO; - - /* wait for the pll lock */ - msg.flags = I2C_M_RD; - msg.len = 1; - for (i = 0; i < 20; i++) { - if (fe->ops.i2c_gate_ctrl) - fe->ops.i2c_gate_ctrl(fe, 1); - if (i2c_transfer(&budget->i2c_adap, &msg, 1) == 1 && (buf[0] & 0x40)) - break; - msleep(10); - } - - /* switch the charge pump to the lower current */ - msg.flags = 0; - msg.len = 2; - msg.buf = &buf[2]; - buf[2] &= ~0x40; - if (fe->ops.i2c_gate_ctrl) - fe->ops.i2c_gate_ctrl(fe, 1); - if (i2c_transfer(&budget->i2c_adap, &msg, 1) != 1) - return -EIO; - - return 0; -} - -static struct tda1002x_config philips_cu1216_config = { - .demod_address = 0x0c, - .invert = 1, -}; - -static struct tda1002x_config philips_cu1216_config_altaddress = { - .demod_address = 0x0d, - .invert = 0, -}; - -static struct tda10023_config philips_cu1216_tda10023_config = { - .demod_address = 0x0c, - .invert = 1, -}; - -static int philips_tu1216_tuner_init(struct dvb_frontend *fe) -{ - struct budget *budget = (struct budget *) fe->dvb->priv; - static u8 tu1216_init[] = { 0x0b, 0xf5, 0x85, 0xab }; - struct i2c_msg tuner_msg = {.addr = 0x60,.flags = 0,.buf = tu1216_init,.len = sizeof(tu1216_init) }; - - // setup PLL configuration - if (fe->ops.i2c_gate_ctrl) - fe->ops.i2c_gate_ctrl(fe, 1); - if (i2c_transfer(&budget->i2c_adap, &tuner_msg, 1) != 1) - return -EIO; - msleep(1); - - return 0; -} - -static int philips_tu1216_tuner_set_params(struct dvb_frontend *fe) -{ - struct dtv_frontend_properties *c = &fe->dtv_property_cache; - struct budget *budget = (struct budget *) fe->dvb->priv; - u8 tuner_buf[4]; - struct i2c_msg tuner_msg = {.addr = 0x60,.flags = 0,.buf = tuner_buf,.len = - sizeof(tuner_buf) }; - int tuner_frequency = 0; - u8 band, cp, filter; - - // determine charge pump - tuner_frequency = c->frequency + 36166000; - if (tuner_frequency < 87000000) - return -EINVAL; - else if (tuner_frequency < 130000000) - cp = 3; - else if (tuner_frequency < 160000000) - cp = 5; - else if (tuner_frequency < 200000000) - cp = 6; - else if (tuner_frequency < 290000000) - cp = 3; - else if (tuner_frequency < 420000000) - cp = 5; - else if (tuner_frequency < 480000000) - cp = 6; - else if (tuner_frequency < 620000000) - cp = 3; - else if (tuner_frequency < 830000000) - cp = 5; - else if (tuner_frequency < 895000000) - cp = 7; - else - return -EINVAL; - - // determine band - if (c->frequency < 49000000) - return -EINVAL; - else if (c->frequency < 161000000) - band = 1; - else if (c->frequency < 444000000) - band = 2; - else if (c->frequency < 861000000) - band = 4; - else - return -EINVAL; - - // setup PLL filter - switch (c->bandwidth_hz) { - case 6000000: - filter = 0; - break; - - case 7000000: - filter = 0; - break; - - case 8000000: - filter = 1; - break; - - default: - return -EINVAL; - } - - // calculate divisor - // ((36166000+((1000000/6)/2)) + Finput)/(1000000/6) - tuner_frequency = (((c->frequency / 1000) * 6) + 217496) / 1000; - - // setup tuner buffer - tuner_buf[0] = (tuner_frequency >> 8) & 0x7f; - tuner_buf[1] = tuner_frequency & 0xff; - tuner_buf[2] = 0xca; - tuner_buf[3] = (cp << 5) | (filter << 3) | band; - - if (fe->ops.i2c_gate_ctrl) - fe->ops.i2c_gate_ctrl(fe, 1); - if (i2c_transfer(&budget->i2c_adap, &tuner_msg, 1) != 1) - return -EIO; - - msleep(1); - return 0; -} - -static int philips_tu1216_request_firmware(struct dvb_frontend *fe, - const struct firmware **fw, char *name) -{ - struct budget *budget = (struct budget *) fe->dvb->priv; - - return request_firmware(fw, name, &budget->dev->pci->dev); -} - -static struct tda1004x_config philips_tu1216_config = { - - .demod_address = 0x8, - .invert = 1, - .invert_oclk = 1, - .xtal_freq = TDA10046_XTAL_4M, - .agc_config = TDA10046_AGC_DEFAULT, - .if_freq = TDA10046_FREQ_3617, - .request_firmware = philips_tu1216_request_firmware, -}; - -static u8 philips_sd1878_inittab[] = { - 0x01, 0x15, - 0x02, 0x30, - 0x03, 0x00, - 0x04, 0x7d, - 0x05, 0x35, - 0x06, 0x40, - 0x07, 0x00, - 0x08, 0x43, - 0x09, 0x02, - 0x0C, 0x51, - 0x0D, 0x82, - 0x0E, 0x23, - 0x10, 0x3f, - 0x11, 0x84, - 0x12, 0xb9, - 0x15, 0xc9, - 0x16, 0x19, - 0x17, 0x8c, - 0x18, 0x59, - 0x19, 0xf8, - 0x1a, 0xfe, - 0x1c, 0x7f, - 0x1d, 0x00, - 0x1e, 0x00, - 0x1f, 0x50, - 0x20, 0x00, - 0x21, 0x00, - 0x22, 0x00, - 0x23, 0x00, - 0x28, 0x00, - 0x29, 0x28, - 0x2a, 0x14, - 0x2b, 0x0f, - 0x2c, 0x09, - 0x2d, 0x09, - 0x31, 0x1f, - 0x32, 0x19, - 0x33, 0xfc, - 0x34, 0x93, - 0xff, 0xff -}; - -static int philips_sd1878_ci_set_symbol_rate(struct dvb_frontend *fe, - u32 srate, u32 ratio) -{ - u8 aclk = 0; - u8 bclk = 0; - u8 m1; - - aclk = 0xb5; - if (srate < 2000000) - bclk = 0x86; - else if (srate < 5000000) - bclk = 0x89; - else if (srate < 15000000) - bclk = 0x8f; - else if (srate < 45000000) - bclk = 0x95; - - m1 = 0x14; - if (srate < 4000000) - m1 = 0x10; - - stv0299_writereg(fe, 0x0e, 0x23); - stv0299_writereg(fe, 0x0f, 0x94); - stv0299_writereg(fe, 0x10, 0x39); - stv0299_writereg(fe, 0x13, aclk); - stv0299_writereg(fe, 0x14, bclk); - stv0299_writereg(fe, 0x15, 0xc9); - stv0299_writereg(fe, 0x1f, (ratio >> 16) & 0xff); - stv0299_writereg(fe, 0x20, (ratio >> 8) & 0xff); - stv0299_writereg(fe, 0x21, (ratio) & 0xf0); - stv0299_writereg(fe, 0x0f, 0x80 | m1); - - return 0; -} - -static const struct stv0299_config philips_sd1878_config = { - .demod_address = 0x68, - .inittab = philips_sd1878_inittab, - .mclk = 88000000UL, - .invert = 0, - .skip_reinit = 0, - .lock_output = STV0299_LOCKOUTPUT_1, - .volt13_op0_op1 = STV0299_VOLT13_OP0, - .min_delay_ms = 100, - .set_symbol_rate = philips_sd1878_ci_set_symbol_rate, -}; - -/* KNC1 DVB-S (STB0899) Inittab */ -static const struct stb0899_s1_reg knc1_stb0899_s1_init_1[] = { - - { STB0899_DEV_ID , 0x81 }, - { STB0899_DISCNTRL1 , 0x32 }, - { STB0899_DISCNTRL2 , 0x80 }, - { STB0899_DISRX_ST0 , 0x04 }, - { STB0899_DISRX_ST1 , 0x00 }, - { STB0899_DISPARITY , 0x00 }, - { STB0899_DISSTATUS , 0x20 }, - { STB0899_DISF22 , 0x8c }, - { STB0899_DISF22RX , 0x9a }, - { STB0899_SYSREG , 0x0b }, - { STB0899_ACRPRESC , 0x11 }, - { STB0899_ACRDIV1 , 0x0a }, - { STB0899_ACRDIV2 , 0x05 }, - { STB0899_DACR1 , 0x00 }, - { STB0899_DACR2 , 0x00 }, - { STB0899_OUTCFG , 0x00 }, - { STB0899_MODECFG , 0x00 }, - { STB0899_IRQSTATUS_3 , 0x30 }, - { STB0899_IRQSTATUS_2 , 0x00 }, - { STB0899_IRQSTATUS_1 , 0x00 }, - { STB0899_IRQSTATUS_0 , 0x00 }, - { STB0899_IRQMSK_3 , 0xf3 }, - { STB0899_IRQMSK_2 , 0xfc }, - { STB0899_IRQMSK_1 , 0xff }, - { STB0899_IRQMSK_0 , 0xff }, - { STB0899_IRQCFG , 0x00 }, - { STB0899_I2CCFG , 0x88 }, - { STB0899_I2CRPT , 0x58 }, /* Repeater=8, Stop=disabled */ - { STB0899_IOPVALUE5 , 0x00 }, - { STB0899_IOPVALUE4 , 0x20 }, - { STB0899_IOPVALUE3 , 0xc9 }, - { STB0899_IOPVALUE2 , 0x90 }, - { STB0899_IOPVALUE1 , 0x40 }, - { STB0899_IOPVALUE0 , 0x00 }, - { STB0899_GPIO00CFG , 0x82 }, - { STB0899_GPIO01CFG , 0x82 }, - { STB0899_GPIO02CFG , 0x82 }, - { STB0899_GPIO03CFG , 0x82 }, - { STB0899_GPIO04CFG , 0x82 }, - { STB0899_GPIO05CFG , 0x82 }, - { STB0899_GPIO06CFG , 0x82 }, - { STB0899_GPIO07CFG , 0x82 }, - { STB0899_GPIO08CFG , 0x82 }, - { STB0899_GPIO09CFG , 0x82 }, - { STB0899_GPIO10CFG , 0x82 }, - { STB0899_GPIO11CFG , 0x82 }, - { STB0899_GPIO12CFG , 0x82 }, - { STB0899_GPIO13CFG , 0x82 }, - { STB0899_GPIO14CFG , 0x82 }, - { STB0899_GPIO15CFG , 0x82 }, - { STB0899_GPIO16CFG , 0x82 }, - { STB0899_GPIO17CFG , 0x82 }, - { STB0899_GPIO18CFG , 0x82 }, - { STB0899_GPIO19CFG , 0x82 }, - { STB0899_GPIO20CFG , 0x82 }, - { STB0899_SDATCFG , 0xb8 }, - { STB0899_SCLTCFG , 0xba }, - { STB0899_AGCRFCFG , 0x08 }, /* 0x1c */ - { STB0899_GPIO22 , 0x82 }, /* AGCBB2CFG */ - { STB0899_GPIO21 , 0x91 }, /* AGCBB1CFG */ - { STB0899_DIRCLKCFG , 0x82 }, - { STB0899_CLKOUT27CFG , 0x7e }, - { STB0899_STDBYCFG , 0x82 }, - { STB0899_CS0CFG , 0x82 }, - { STB0899_CS1CFG , 0x82 }, - { STB0899_DISEQCOCFG , 0x20 }, - { STB0899_GPIO32CFG , 0x82 }, - { STB0899_GPIO33CFG , 0x82 }, - { STB0899_GPIO34CFG , 0x82 }, - { STB0899_GPIO35CFG , 0x82 }, - { STB0899_GPIO36CFG , 0x82 }, - { STB0899_GPIO37CFG , 0x82 }, - { STB0899_GPIO38CFG , 0x82 }, - { STB0899_GPIO39CFG , 0x82 }, - { STB0899_NCOARSE , 0x15 }, /* 0x15 = 27 Mhz Clock, F/3 = 198MHz, F/6 = 99MHz */ - { STB0899_SYNTCTRL , 0x02 }, /* 0x00 = CLK from CLKI, 0x02 = CLK from XTALI */ - { STB0899_FILTCTRL , 0x00 }, - { STB0899_SYSCTRL , 0x00 }, - { STB0899_STOPCLK1 , 0x20 }, - { STB0899_STOPCLK2 , 0x00 }, - { STB0899_INTBUFSTATUS , 0x00 }, - { STB0899_INTBUFCTRL , 0x0a }, - { 0xffff , 0xff }, -}; - -static const struct stb0899_s1_reg knc1_stb0899_s1_init_3[] = { - { STB0899_DEMOD , 0x00 }, - { STB0899_RCOMPC , 0xc9 }, - { STB0899_AGC1CN , 0x41 }, - { STB0899_AGC1REF , 0x08 }, - { STB0899_RTC , 0x7a }, - { STB0899_TMGCFG , 0x4e }, - { STB0899_AGC2REF , 0x33 }, - { STB0899_TLSR , 0x84 }, - { STB0899_CFD , 0xee }, - { STB0899_ACLC , 0x87 }, - { STB0899_BCLC , 0x94 }, - { STB0899_EQON , 0x41 }, - { STB0899_LDT , 0xdd }, - { STB0899_LDT2 , 0xc9 }, - { STB0899_EQUALREF , 0xb4 }, - { STB0899_TMGRAMP , 0x10 }, - { STB0899_TMGTHD , 0x30 }, - { STB0899_IDCCOMP , 0xfb }, - { STB0899_QDCCOMP , 0x03 }, - { STB0899_POWERI , 0x3b }, - { STB0899_POWERQ , 0x3d }, - { STB0899_RCOMP , 0x81 }, - { STB0899_AGCIQIN , 0x80 }, - { STB0899_AGC2I1 , 0x04 }, - { STB0899_AGC2I2 , 0xf5 }, - { STB0899_TLIR , 0x25 }, - { STB0899_RTF , 0x80 }, - { STB0899_DSTATUS , 0x00 }, - { STB0899_LDI , 0xca }, - { STB0899_CFRM , 0xf1 }, - { STB0899_CFRL , 0xf3 }, - { STB0899_NIRM , 0x2a }, - { STB0899_NIRL , 0x05 }, - { STB0899_ISYMB , 0x17 }, - { STB0899_QSYMB , 0xfa }, - { STB0899_SFRH , 0x2f }, - { STB0899_SFRM , 0x68 }, - { STB0899_SFRL , 0x40 }, - { STB0899_SFRUPH , 0x2f }, - { STB0899_SFRUPM , 0x68 }, - { STB0899_SFRUPL , 0x40 }, - { STB0899_EQUAI1 , 0xfd }, - { STB0899_EQUAQ1 , 0x04 }, - { STB0899_EQUAI2 , 0x0f }, - { STB0899_EQUAQ2 , 0xff }, - { STB0899_EQUAI3 , 0xdf }, - { STB0899_EQUAQ3 , 0xfa }, - { STB0899_EQUAI4 , 0x37 }, - { STB0899_EQUAQ4 , 0x0d }, - { STB0899_EQUAI5 , 0xbd }, - { STB0899_EQUAQ5 , 0xf7 }, - { STB0899_DSTATUS2 , 0x00 }, - { STB0899_VSTATUS , 0x00 }, - { STB0899_VERROR , 0xff }, - { STB0899_IQSWAP , 0x2a }, - { STB0899_ECNT1M , 0x00 }, - { STB0899_ECNT1L , 0x00 }, - { STB0899_ECNT2M , 0x00 }, - { STB0899_ECNT2L , 0x00 }, - { STB0899_ECNT3M , 0x00 }, - { STB0899_ECNT3L , 0x00 }, - { STB0899_FECAUTO1 , 0x06 }, - { STB0899_FECM , 0x01 }, - { STB0899_VTH12 , 0xf0 }, - { STB0899_VTH23 , 0xa0 }, - { STB0899_VTH34 , 0x78 }, - { STB0899_VTH56 , 0x4e }, - { STB0899_VTH67 , 0x48 }, - { STB0899_VTH78 , 0x38 }, - { STB0899_PRVIT , 0xff }, - { STB0899_VITSYNC , 0x19 }, - { STB0899_RSULC , 0xb1 }, /* DVB = 0xb1, DSS = 0xa1 */ - { STB0899_TSULC , 0x42 }, - { STB0899_RSLLC , 0x40 }, - { STB0899_TSLPL , 0x12 }, - { STB0899_TSCFGH , 0x0c }, - { STB0899_TSCFGM , 0x00 }, - { STB0899_TSCFGL , 0x0c }, - { STB0899_TSOUT , 0x4d }, /* 0x0d for CAM */ - { STB0899_RSSYNCDEL , 0x00 }, - { STB0899_TSINHDELH , 0x02 }, - { STB0899_TSINHDELM , 0x00 }, - { STB0899_TSINHDELL , 0x00 }, - { STB0899_TSLLSTKM , 0x00 }, - { STB0899_TSLLSTKL , 0x00 }, - { STB0899_TSULSTKM , 0x00 }, - { STB0899_TSULSTKL , 0xab }, - { STB0899_PCKLENUL , 0x00 }, - { STB0899_PCKLENLL , 0xcc }, - { STB0899_RSPCKLEN , 0xcc }, - { STB0899_TSSTATUS , 0x80 }, - { STB0899_ERRCTRL1 , 0xb6 }, - { STB0899_ERRCTRL2 , 0x96 }, - { STB0899_ERRCTRL3 , 0x89 }, - { STB0899_DMONMSK1 , 0x27 }, - { STB0899_DMONMSK0 , 0x03 }, - { STB0899_DEMAPVIT , 0x5c }, - { STB0899_PLPARM , 0x1f }, - { STB0899_PDELCTRL , 0x48 }, - { STB0899_PDELCTRL2 , 0x00 }, - { STB0899_BBHCTRL1 , 0x00 }, - { STB0899_BBHCTRL2 , 0x00 }, - { STB0899_HYSTTHRESH , 0x77 }, - { STB0899_MATCSTM , 0x00 }, - { STB0899_MATCSTL , 0x00 }, - { STB0899_UPLCSTM , 0x00 }, - { STB0899_UPLCSTL , 0x00 }, - { STB0899_DFLCSTM , 0x00 }, - { STB0899_DFLCSTL , 0x00 }, - { STB0899_SYNCCST , 0x00 }, - { STB0899_SYNCDCSTM , 0x00 }, - { STB0899_SYNCDCSTL , 0x00 }, - { STB0899_ISI_ENTRY , 0x00 }, - { STB0899_ISI_BIT_EN , 0x00 }, - { STB0899_MATSTRM , 0x00 }, - { STB0899_MATSTRL , 0x00 }, - { STB0899_UPLSTRM , 0x00 }, - { STB0899_UPLSTRL , 0x00 }, - { STB0899_DFLSTRM , 0x00 }, - { STB0899_DFLSTRL , 0x00 }, - { STB0899_SYNCSTR , 0x00 }, - { STB0899_SYNCDSTRM , 0x00 }, - { STB0899_SYNCDSTRL , 0x00 }, - { STB0899_CFGPDELSTATUS1 , 0x10 }, - { STB0899_CFGPDELSTATUS2 , 0x00 }, - { STB0899_BBFERRORM , 0x00 }, - { STB0899_BBFERRORL , 0x00 }, - { STB0899_UPKTERRORM , 0x00 }, - { STB0899_UPKTERRORL , 0x00 }, - { 0xffff , 0xff }, -}; - -/* STB0899 demodulator config for the KNC1 and clones */ -static struct stb0899_config knc1_dvbs2_config = { - .init_dev = knc1_stb0899_s1_init_1, - .init_s2_demod = stb0899_s2_init_2, - .init_s1_demod = knc1_stb0899_s1_init_3, - .init_s2_fec = stb0899_s2_init_4, - .init_tst = stb0899_s1_init_5, - - .postproc = NULL, - - .demod_address = 0x68, -// .ts_output_mode = STB0899_OUT_PARALLEL, /* types = SERIAL/PARALLEL */ - .block_sync_mode = STB0899_SYNC_FORCED, /* DSS, SYNC_FORCED/UNSYNCED */ -// .ts_pfbit_toggle = STB0899_MPEG_NORMAL, /* DirecTV, MPEG toggling seq */ - - .xtal_freq = 27000000, - .inversion = IQ_SWAP_OFF, - - .lo_clk = 76500000, - .hi_clk = 90000000, - - .esno_ave = STB0899_DVBS2_ESNO_AVE, - .esno_quant = STB0899_DVBS2_ESNO_QUANT, - .avframes_coarse = STB0899_DVBS2_AVFRAMES_COARSE, - .avframes_fine = STB0899_DVBS2_AVFRAMES_FINE, - .miss_threshold = STB0899_DVBS2_MISS_THRESHOLD, - .uwp_threshold_acq = STB0899_DVBS2_UWP_THRESHOLD_ACQ, - .uwp_threshold_track = STB0899_DVBS2_UWP_THRESHOLD_TRACK, - .uwp_threshold_sof = STB0899_DVBS2_UWP_THRESHOLD_SOF, - .sof_search_timeout = STB0899_DVBS2_SOF_SEARCH_TIMEOUT, - - .btr_nco_bits = STB0899_DVBS2_BTR_NCO_BITS, - .btr_gain_shift_offset = STB0899_DVBS2_BTR_GAIN_SHIFT_OFFSET, - .crl_nco_bits = STB0899_DVBS2_CRL_NCO_BITS, - .ldpc_max_iter = STB0899_DVBS2_LDPC_MAX_ITER, - - .tuner_get_frequency = tda8261_get_frequency, - .tuner_set_frequency = tda8261_set_frequency, - .tuner_set_bandwidth = NULL, - .tuner_get_bandwidth = tda8261_get_bandwidth, - .tuner_set_rfsiggain = NULL -}; - -/* - * SD1878/SHA tuner config - * 1F, Single I/P, Horizontal mount, High Sensitivity - */ -static const struct tda8261_config sd1878c_config = { -// .name = "SD1878/SHA", - .addr = 0x60, - .step_size = TDA8261_STEP_1000 /* kHz */ -}; - -static u8 read_pwm(struct budget_av *budget_av) -{ - u8 b = 0xff; - u8 pwm; - struct i2c_msg msg[] = { {.addr = 0x50,.flags = 0,.buf = &b,.len = 1}, - {.addr = 0x50,.flags = I2C_M_RD,.buf = &pwm,.len = 1} - }; - - if ((i2c_transfer(&budget_av->budget.i2c_adap, msg, 2) != 2) - || (pwm == 0xff)) - pwm = 0x48; - - return pwm; -} - -#define SUBID_DVBS_KNC1 0x0010 -#define SUBID_DVBS_KNC1_PLUS 0x0011 -#define SUBID_DVBS_TYPHOON 0x4f56 -#define SUBID_DVBS_CINERGY1200 0x1154 -#define SUBID_DVBS_CYNERGY1200N 0x1155 -#define SUBID_DVBS_TV_STAR 0x0014 -#define SUBID_DVBS_TV_STAR_PLUS_X4 0x0015 -#define SUBID_DVBS_TV_STAR_CI 0x0016 -#define SUBID_DVBS2_KNC1 0x0018 -#define SUBID_DVBS2_KNC1_OEM 0x0019 -#define SUBID_DVBS_EASYWATCH_1 0x001a -#define SUBID_DVBS_EASYWATCH_2 0x001b -#define SUBID_DVBS2_EASYWATCH 0x001d -#define SUBID_DVBS_EASYWATCH 0x001e - -#define SUBID_DVBC_EASYWATCH 0x002a -#define SUBID_DVBC_EASYWATCH_MK3 0x002c -#define SUBID_DVBC_KNC1 0x0020 -#define SUBID_DVBC_KNC1_PLUS 0x0021 -#define SUBID_DVBC_KNC1_MK3 0x0022 -#define SUBID_DVBC_KNC1_TDA10024 0x0028 -#define SUBID_DVBC_KNC1_PLUS_MK3 0x0023 -#define SUBID_DVBC_CINERGY1200 0x1156 -#define SUBID_DVBC_CINERGY1200_MK3 0x1176 - -#define SUBID_DVBT_EASYWATCH 0x003a -#define SUBID_DVBT_KNC1_PLUS 0x0031 -#define SUBID_DVBT_KNC1 0x0030 -#define SUBID_DVBT_CINERGY1200 0x1157 - -static void frontend_init(struct budget_av *budget_av) -{ - struct saa7146_dev * saa = budget_av->budget.dev; - struct dvb_frontend * fe = NULL; - - /* Enable / PowerON Frontend */ - saa7146_setgpio(saa, 0, SAA7146_GPIO_OUTLO); - - /* Wait for PowerON */ - msleep(100); - - /* additional setup necessary for the PLUS cards */ - switch (saa->pci->subsystem_device) { - case SUBID_DVBS_KNC1_PLUS: - case SUBID_DVBC_KNC1_PLUS: - case SUBID_DVBT_KNC1_PLUS: - case SUBID_DVBC_EASYWATCH: - case SUBID_DVBC_KNC1_PLUS_MK3: - case SUBID_DVBS2_KNC1: - case SUBID_DVBS2_KNC1_OEM: - case SUBID_DVBS2_EASYWATCH: - saa7146_setgpio(saa, 3, SAA7146_GPIO_OUTHI); - break; - } - - switch (saa->pci->subsystem_device) { - - case SUBID_DVBS_KNC1: - /* - * maybe that setting is needed for other dvb-s cards as well, - * but so far it has been only confirmed for this type - */ - budget_av->reinitialise_demod = 1; - fallthrough; - case SUBID_DVBS_KNC1_PLUS: - case SUBID_DVBS_EASYWATCH_1: - if (saa->pci->subsystem_vendor == 0x1894) { - fe = dvb_attach(stv0299_attach, &cinergy_1200s_1894_0010_config, - &budget_av->budget.i2c_adap); - if (fe) { - dvb_attach(tua6100_attach, fe, 0x60, &budget_av->budget.i2c_adap); - } - } else { - fe = dvb_attach(stv0299_attach, &typhoon_config, - &budget_av->budget.i2c_adap); - if (fe) { - fe->ops.tuner_ops.set_params = philips_su1278_ty_ci_tuner_set_params; - } - } - break; - - case SUBID_DVBS_TV_STAR: - case SUBID_DVBS_TV_STAR_PLUS_X4: - case SUBID_DVBS_TV_STAR_CI: - case SUBID_DVBS_CYNERGY1200N: - case SUBID_DVBS_EASYWATCH: - case SUBID_DVBS_EASYWATCH_2: - fe = dvb_attach(stv0299_attach, &philips_sd1878_config, - &budget_av->budget.i2c_adap); - if (fe) { - dvb_attach(dvb_pll_attach, fe, 0x60, - &budget_av->budget.i2c_adap, - DVB_PLL_PHILIPS_SD1878_TDA8261); - } - break; - - case SUBID_DVBS_TYPHOON: - fe = dvb_attach(stv0299_attach, &typhoon_config, - &budget_av->budget.i2c_adap); - if (fe) { - fe->ops.tuner_ops.set_params = philips_su1278_ty_ci_tuner_set_params; - } - break; - case SUBID_DVBS2_KNC1: - case SUBID_DVBS2_KNC1_OEM: - case SUBID_DVBS2_EASYWATCH: - budget_av->reinitialise_demod = 1; - if ((fe = dvb_attach(stb0899_attach, &knc1_dvbs2_config, &budget_av->budget.i2c_adap))) - dvb_attach(tda8261_attach, fe, &sd1878c_config, &budget_av->budget.i2c_adap); - - break; - case SUBID_DVBS_CINERGY1200: - fe = dvb_attach(stv0299_attach, &cinergy_1200s_config, - &budget_av->budget.i2c_adap); - if (fe) { - fe->ops.tuner_ops.set_params = philips_su1278_ty_ci_tuner_set_params; - } - break; - - case SUBID_DVBC_KNC1: - case SUBID_DVBC_KNC1_PLUS: - case SUBID_DVBC_CINERGY1200: - case SUBID_DVBC_EASYWATCH: - budget_av->reinitialise_demod = 1; - budget_av->budget.dev->i2c_bitrate = SAA7146_I2C_BUS_BIT_RATE_240; - fe = dvb_attach(tda10021_attach, &philips_cu1216_config, - &budget_av->budget.i2c_adap, - read_pwm(budget_av)); - if (fe == NULL) - fe = dvb_attach(tda10021_attach, &philips_cu1216_config_altaddress, - &budget_av->budget.i2c_adap, - read_pwm(budget_av)); - if (fe) { - fe->ops.tuner_ops.set_params = philips_cu1216_tuner_set_params; - } - break; - - case SUBID_DVBC_EASYWATCH_MK3: - case SUBID_DVBC_CINERGY1200_MK3: - case SUBID_DVBC_KNC1_MK3: - case SUBID_DVBC_KNC1_TDA10024: - case SUBID_DVBC_KNC1_PLUS_MK3: - budget_av->reinitialise_demod = 1; - budget_av->budget.dev->i2c_bitrate = SAA7146_I2C_BUS_BIT_RATE_240; - fe = dvb_attach(tda10023_attach, - &philips_cu1216_tda10023_config, - &budget_av->budget.i2c_adap, - read_pwm(budget_av)); - if (fe) { - fe->ops.tuner_ops.set_params = philips_cu1216_tuner_set_params; - } - break; - - case SUBID_DVBT_EASYWATCH: - case SUBID_DVBT_KNC1: - case SUBID_DVBT_KNC1_PLUS: - case SUBID_DVBT_CINERGY1200: - budget_av->reinitialise_demod = 1; - fe = dvb_attach(tda10046_attach, &philips_tu1216_config, - &budget_av->budget.i2c_adap); - if (fe) { - fe->ops.tuner_ops.init = philips_tu1216_tuner_init; - fe->ops.tuner_ops.set_params = philips_tu1216_tuner_set_params; - } - break; - } - - if (fe == NULL) { - pr_err("A frontend driver was not found for device [%04x:%04x] subsystem [%04x:%04x]\n", - saa->pci->vendor, - saa->pci->device, - saa->pci->subsystem_vendor, - saa->pci->subsystem_device); - return; - } - - budget_av->budget.dvb_frontend = fe; - - if (dvb_register_frontend(&budget_av->budget.dvb_adapter, - budget_av->budget.dvb_frontend)) { - pr_err("Frontend registration failed!\n"); - dvb_frontend_detach(budget_av->budget.dvb_frontend); - budget_av->budget.dvb_frontend = NULL; - } -} - - -static void budget_av_irq(struct saa7146_dev *dev, u32 * isr) -{ - struct budget_av *budget_av = (struct budget_av *) dev->ext_priv; - - dprintk(8, "dev: %p, budget_av: %p\n", dev, budget_av); - - if (*isr & MASK_10) - ttpci_budget_irq10_handler(dev, isr); -} - -static int budget_av_detach(struct saa7146_dev *dev) -{ - struct budget_av *budget_av = (struct budget_av *) dev->ext_priv; - int err; - - dprintk(2, "dev: %p\n", dev); - - if (1 == budget_av->has_saa7113) { - saa7146_setgpio(dev, 0, SAA7146_GPIO_OUTLO); - - msleep(200); - - saa7146_unregister_device(&budget_av->vd, dev); - - saa7146_vv_release(dev); - } - - if (budget_av->budget.ci_present) - ciintf_deinit(budget_av); - - if (budget_av->budget.dvb_frontend != NULL) { - dvb_unregister_frontend(budget_av->budget.dvb_frontend); - dvb_frontend_detach(budget_av->budget.dvb_frontend); - } - err = ttpci_budget_deinit(&budget_av->budget); - - kfree(budget_av); - - return err; -} - -#define KNC1_INPUTS 2 -static struct v4l2_input knc1_inputs[KNC1_INPUTS] = { - { 0, "Composite", V4L2_INPUT_TYPE_TUNER, 1, 0, - V4L2_STD_PAL_BG | V4L2_STD_NTSC_M, 0, V4L2_IN_CAP_STD }, - { 1, "S-Video", V4L2_INPUT_TYPE_CAMERA, 2, 0, - V4L2_STD_PAL_BG | V4L2_STD_NTSC_M, 0, V4L2_IN_CAP_STD }, -}; - -static int vidioc_enum_input(struct file *file, void *fh, struct v4l2_input *i) -{ - dprintk(1, "VIDIOC_ENUMINPUT %d\n", i->index); - if (i->index >= KNC1_INPUTS) - return -EINVAL; - memcpy(i, &knc1_inputs[i->index], sizeof(struct v4l2_input)); - return 0; -} - -static int vidioc_g_input(struct file *file, void *fh, unsigned int *i) -{ - struct saa7146_dev *dev = ((struct saa7146_fh *)fh)->dev; - struct budget_av *budget_av = (struct budget_av *)dev->ext_priv; - - *i = budget_av->cur_input; - - dprintk(1, "VIDIOC_G_INPUT %d\n", *i); - return 0; -} - -static int vidioc_s_input(struct file *file, void *fh, unsigned int input) -{ - struct saa7146_dev *dev = ((struct saa7146_fh *)fh)->dev; - struct budget_av *budget_av = (struct budget_av *)dev->ext_priv; - - dprintk(1, "VIDIOC_S_INPUT %d\n", input); - return saa7113_setinput(budget_av, input); -} - -static struct saa7146_ext_vv vv_data; - -static int budget_av_attach(struct saa7146_dev *dev, struct saa7146_pci_extension_data *info) -{ - struct budget_av *budget_av; - u8 *mac; - int err; - - dprintk(2, "dev: %p\n", dev); - - if (!(budget_av = kzalloc(sizeof(struct budget_av), GFP_KERNEL))) - return -ENOMEM; - - budget_av->has_saa7113 = 0; - budget_av->budget.ci_present = 0; - - dev->ext_priv = budget_av; - - err = ttpci_budget_init(&budget_av->budget, dev, info, THIS_MODULE, - adapter_nr); - if (err) { - kfree(budget_av); - return err; - } - - /* knc1 initialization */ - saa7146_write(dev, DD1_STREAM_B, 0x04000000); - saa7146_write(dev, DD1_INIT, 0x07000600); - saa7146_write(dev, MC2, MASK_09 | MASK_25 | MASK_10 | MASK_26); - - if (saa7113_init(budget_av) == 0) { - budget_av->has_saa7113 = 1; - err = saa7146_vv_init(dev, &vv_data); - if (err != 0) { - /* fixme: proper cleanup here */ - ERR("cannot init vv subsystem\n"); - return err; - } - vv_data.vid_ops.vidioc_enum_input = vidioc_enum_input; - vv_data.vid_ops.vidioc_g_input = vidioc_g_input; - vv_data.vid_ops.vidioc_s_input = vidioc_s_input; - - if ((err = saa7146_register_device(&budget_av->vd, dev, "knc1", VFL_TYPE_VIDEO))) { - /* fixme: proper cleanup here */ - ERR("cannot register capture v4l2 device\n"); - saa7146_vv_release(dev); - return err; - } - - /* beware: this modifies dev->vv ... */ - saa7146_set_hps_source_and_sync(dev, SAA7146_HPS_SOURCE_PORT_A, - SAA7146_HPS_SYNC_PORT_A); - - saa7113_setinput(budget_av, 0); - } - - /* fixme: find some sane values here... */ - saa7146_write(dev, PCI_BT_V1, 0x1c00101f); - - mac = budget_av->budget.dvb_adapter.proposed_mac; - if (i2c_readregs(&budget_av->budget.i2c_adap, 0xa0, 0x30, mac, 6)) { - pr_err("KNC1-%d: Could not read MAC from KNC1 card\n", - budget_av->budget.dvb_adapter.num); - eth_zero_addr(mac); - } else { - pr_info("KNC1-%d: MAC addr = %pM\n", - budget_av->budget.dvb_adapter.num, mac); - } - - budget_av->budget.dvb_adapter.priv = budget_av; - frontend_init(budget_av); - ciintf_init(budget_av); - - ttpci_budget_init_hooks(&budget_av->budget); - - return 0; -} - -static struct saa7146_standard standard[] = { - {.name = "PAL",.id = V4L2_STD_PAL, - .v_offset = 0x17,.v_field = 288, - .h_offset = 0x14,.h_pixels = 680, - .v_max_out = 576,.h_max_out = 768 }, - - {.name = "NTSC",.id = V4L2_STD_NTSC, - .v_offset = 0x16,.v_field = 240, - .h_offset = 0x06,.h_pixels = 708, - .v_max_out = 480,.h_max_out = 640, }, -}; - -static struct saa7146_ext_vv vv_data = { - .inputs = 2, - .capabilities = 0, // perhaps later: V4L2_CAP_VBI_CAPTURE, but that need tweaking with the saa7113 - .flags = 0, - .stds = &standard[0], - .num_stds = ARRAY_SIZE(standard), -}; - -static struct saa7146_extension budget_extension; - -MAKE_BUDGET_INFO(knc1s, "KNC1 DVB-S", BUDGET_KNC1S); -MAKE_BUDGET_INFO(knc1s2,"KNC1 DVB-S2", BUDGET_KNC1S2); -MAKE_BUDGET_INFO(sates2,"Satelco EasyWatch DVB-S2", BUDGET_KNC1S2); -MAKE_BUDGET_INFO(knc1c, "KNC1 DVB-C", BUDGET_KNC1C); -MAKE_BUDGET_INFO(knc1t, "KNC1 DVB-T", BUDGET_KNC1T); -MAKE_BUDGET_INFO(kncxs, "KNC TV STAR DVB-S", BUDGET_TVSTAR); -MAKE_BUDGET_INFO(satewpls, "Satelco EasyWatch DVB-S light", BUDGET_TVSTAR); -MAKE_BUDGET_INFO(satewpls1, "Satelco EasyWatch DVB-S light", BUDGET_KNC1S); -MAKE_BUDGET_INFO(satewps, "Satelco EasyWatch DVB-S", BUDGET_KNC1S); -MAKE_BUDGET_INFO(satewplc, "Satelco EasyWatch DVB-C", BUDGET_KNC1CP); -MAKE_BUDGET_INFO(satewcmk3, "Satelco EasyWatch DVB-C MK3", BUDGET_KNC1C_MK3); -MAKE_BUDGET_INFO(satewt, "Satelco EasyWatch DVB-T", BUDGET_KNC1T); -MAKE_BUDGET_INFO(knc1sp, "KNC1 DVB-S Plus", BUDGET_KNC1SP); -MAKE_BUDGET_INFO(knc1spx4, "KNC1 DVB-S Plus X4", BUDGET_KNC1SP); -MAKE_BUDGET_INFO(knc1cp, "KNC1 DVB-C Plus", BUDGET_KNC1CP); -MAKE_BUDGET_INFO(knc1cmk3, "KNC1 DVB-C MK3", BUDGET_KNC1C_MK3); -MAKE_BUDGET_INFO(knc1ctda10024, "KNC1 DVB-C TDA10024", BUDGET_KNC1C_TDA10024); -MAKE_BUDGET_INFO(knc1cpmk3, "KNC1 DVB-C Plus MK3", BUDGET_KNC1CP_MK3); -MAKE_BUDGET_INFO(knc1tp, "KNC1 DVB-T Plus", BUDGET_KNC1TP); -MAKE_BUDGET_INFO(cin1200s, "TerraTec Cinergy 1200 DVB-S", BUDGET_CIN1200S); -MAKE_BUDGET_INFO(cin1200sn, "TerraTec Cinergy 1200 DVB-S", BUDGET_CIN1200S); -MAKE_BUDGET_INFO(cin1200c, "Terratec Cinergy 1200 DVB-C", BUDGET_CIN1200C); -MAKE_BUDGET_INFO(cin1200cmk3, "Terratec Cinergy 1200 DVB-C MK3", BUDGET_CIN1200C_MK3); -MAKE_BUDGET_INFO(cin1200t, "Terratec Cinergy 1200 DVB-T", BUDGET_CIN1200T); - -static const struct pci_device_id pci_tbl[] = { - MAKE_EXTENSION_PCI(knc1s, 0x1131, 0x4f56), - MAKE_EXTENSION_PCI(knc1s, 0x1131, 0x0010), - MAKE_EXTENSION_PCI(knc1s, 0x1894, 0x0010), - MAKE_EXTENSION_PCI(knc1sp, 0x1131, 0x0011), - MAKE_EXTENSION_PCI(knc1sp, 0x1894, 0x0011), - MAKE_EXTENSION_PCI(kncxs, 0x1894, 0x0014), - MAKE_EXTENSION_PCI(knc1spx4, 0x1894, 0x0015), - MAKE_EXTENSION_PCI(kncxs, 0x1894, 0x0016), - MAKE_EXTENSION_PCI(knc1s2, 0x1894, 0x0018), - MAKE_EXTENSION_PCI(knc1s2, 0x1894, 0x0019), - MAKE_EXTENSION_PCI(sates2, 0x1894, 0x001d), - MAKE_EXTENSION_PCI(satewpls, 0x1894, 0x001e), - MAKE_EXTENSION_PCI(satewpls1, 0x1894, 0x001a), - MAKE_EXTENSION_PCI(satewps, 0x1894, 0x001b), - MAKE_EXTENSION_PCI(satewplc, 0x1894, 0x002a), - MAKE_EXTENSION_PCI(satewcmk3, 0x1894, 0x002c), - MAKE_EXTENSION_PCI(satewt, 0x1894, 0x003a), - MAKE_EXTENSION_PCI(knc1c, 0x1894, 0x0020), - MAKE_EXTENSION_PCI(knc1cp, 0x1894, 0x0021), - MAKE_EXTENSION_PCI(knc1cmk3, 0x1894, 0x0022), - MAKE_EXTENSION_PCI(knc1ctda10024, 0x1894, 0x0028), - MAKE_EXTENSION_PCI(knc1cpmk3, 0x1894, 0x0023), - MAKE_EXTENSION_PCI(knc1t, 0x1894, 0x0030), - MAKE_EXTENSION_PCI(knc1tp, 0x1894, 0x0031), - MAKE_EXTENSION_PCI(cin1200s, 0x153b, 0x1154), - MAKE_EXTENSION_PCI(cin1200sn, 0x153b, 0x1155), - MAKE_EXTENSION_PCI(cin1200c, 0x153b, 0x1156), - MAKE_EXTENSION_PCI(cin1200cmk3, 0x153b, 0x1176), - MAKE_EXTENSION_PCI(cin1200t, 0x153b, 0x1157), - { - .vendor = 0, - } -}; - -MODULE_DEVICE_TABLE(pci, pci_tbl); - -static struct saa7146_extension budget_extension = { - .name = "budget_av", - .flags = SAA7146_USE_I2C_IRQ, - - .pci_tbl = pci_tbl, - - .module = THIS_MODULE, - .attach = budget_av_attach, - .detach = budget_av_detach, - - .irq_mask = MASK_10, - .irq_func = budget_av_irq, -}; - -static int __init budget_av_init(void) -{ - return saa7146_register_extension(&budget_extension); -} - -static void __exit budget_av_exit(void) -{ - saa7146_unregister_extension(&budget_extension); -} - -module_init(budget_av_init); -module_exit(budget_av_exit); - -MODULE_LICENSE("GPL"); -MODULE_AUTHOR("Ralph Metzler, Marcus Metzler, Michael Hunold, others"); -MODULE_DESCRIPTION("driver for the SAA7146 based so-called budget PCI DVB w/ analog input and CI-module (e.g. the KNC cards)"); diff --git a/drivers/staging/media/deprecated/saa7146/ttpci/budget-ci.c b/drivers/staging/media/deprecated/saa7146/ttpci/budget-ci.c deleted file mode 100644 index d59d18647371..000000000000 --- a/drivers/staging/media/deprecated/saa7146/ttpci/budget-ci.c +++ /dev/null @@ -1,1574 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/* - * budget-ci.c: driver for the SAA7146 based Budget DVB cards - * - * Compiled from various sources by Michael Hunold - * - * msp430 IR support contributed by Jack Thomasson - * partially based on the Siemens DVB driver by Ralph+Marcus Metzler - * - * CI interface support (c) 2004 Andrew de Quincey - * - * the project's page is at https://linuxtv.org - */ - -#include -#include -#include -#include -#include -#include - -#include "budget.h" - -#include -#include "stv0299.h" -#include "stv0297.h" -#include "tda1004x.h" -#include "stb0899_drv.h" -#include "stb0899_reg.h" -#include "stb0899_cfg.h" -#include "stb6100.h" -#include "stb6100_cfg.h" -#include "lnbp21.h" -#include "bsbe1.h" -#include "bsru6.h" -#include "tda1002x.h" -#include "tda827x.h" -#include "bsbe1-d01a.h" - -#define MODULE_NAME "budget_ci" - -/* - * Regarding DEBIADDR_IR: - * Some CI modules hang if random addresses are read. - * Using address 0x4000 for the IR read means that we - * use the same address as for CI version, which should - * be a safe default. - */ -#define DEBIADDR_IR 0x4000 -#define DEBIADDR_CICONTROL 0x0000 -#define DEBIADDR_CIVERSION 0x4000 -#define DEBIADDR_IO 0x1000 -#define DEBIADDR_ATTR 0x3000 - -#define CICONTROL_RESET 0x01 -#define CICONTROL_ENABLETS 0x02 -#define CICONTROL_CAMDETECT 0x08 - -#define DEBICICTL 0x00420000 -#define DEBICICAM 0x02420000 - -#define SLOTSTATUS_NONE 1 -#define SLOTSTATUS_PRESENT 2 -#define SLOTSTATUS_RESET 4 -#define SLOTSTATUS_READY 8 -#define SLOTSTATUS_OCCUPIED (SLOTSTATUS_PRESENT|SLOTSTATUS_RESET|SLOTSTATUS_READY) - -/* RC5 device wildcard */ -#define IR_DEVICE_ANY 255 - -static int rc5_device = -1; -module_param(rc5_device, int, 0644); -MODULE_PARM_DESC(rc5_device, "only IR commands to given RC5 device (device = 0 - 31, any device = 255, default: autodetect)"); - -static int ir_debug; -module_param(ir_debug, int, 0644); -MODULE_PARM_DESC(ir_debug, "enable debugging information for IR decoding"); - -DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); - -struct budget_ci_ir { - struct rc_dev *dev; - struct tasklet_struct msp430_irq_tasklet; - char name[72]; /* 40 + 32 for (struct saa7146_dev).name */ - char phys[32]; - int rc5_device; - u32 ir_key; - bool have_command; - bool full_rc5; /* Outputs a full RC5 code */ -}; - -struct budget_ci { - struct budget budget; - struct tasklet_struct ciintf_irq_tasklet; - int slot_status; - int ci_irq; - struct dvb_ca_en50221 ca; - struct budget_ci_ir ir; - u8 tuner_pll_address; /* used for philips_tdm1316l configs */ -}; - -static void msp430_ir_interrupt(struct tasklet_struct *t) -{ - struct budget_ci_ir *ir = from_tasklet(ir, t, msp430_irq_tasklet); - struct budget_ci *budget_ci = container_of(ir, typeof(*budget_ci), ir); - struct rc_dev *dev = budget_ci->ir.dev; - u32 command = ttpci_budget_debiread(&budget_ci->budget, DEBINOSWAP, DEBIADDR_IR, 2, 1, 0) >> 8; - - /* - * The msp430 chip can generate two different bytes, command and device - * - * type1: X1CCCCCC, C = command bits (0 - 63) - * type2: X0TDDDDD, D = device bits (0 - 31), T = RC5 toggle bit - * - * Each signal from the remote control can generate one or more command - * bytes and one or more device bytes. For the repeated bytes, the - * highest bit (X) is set. The first command byte is always generated - * before the first device byte. Other than that, no specific order - * seems to apply. To make life interesting, bytes can also be lost. - * - * Only when we have a command and device byte, a keypress is - * generated. - */ - - if (ir_debug) - printk("budget_ci: received byte 0x%02x\n", command); - - /* Remove repeat bit, we use every command */ - command = command & 0x7f; - - /* Is this a RC5 command byte? */ - if (command & 0x40) { - budget_ci->ir.have_command = true; - budget_ci->ir.ir_key = command & 0x3f; - return; - } - - /* It's a RC5 device byte */ - if (!budget_ci->ir.have_command) - return; - budget_ci->ir.have_command = false; - - if (budget_ci->ir.rc5_device != IR_DEVICE_ANY && - budget_ci->ir.rc5_device != (command & 0x1f)) - return; - - if (budget_ci->ir.full_rc5) { - rc_keydown(dev, RC_PROTO_RC5, - RC_SCANCODE_RC5(budget_ci->ir.rc5_device, budget_ci->ir.ir_key), - !!(command & 0x20)); - return; - } - - /* FIXME: We should generate complete scancodes for all devices */ - rc_keydown(dev, RC_PROTO_UNKNOWN, budget_ci->ir.ir_key, - !!(command & 0x20)); -} - -static int msp430_ir_init(struct budget_ci *budget_ci) -{ - struct saa7146_dev *saa = budget_ci->budget.dev; - struct rc_dev *dev; - int error; - - dev = rc_allocate_device(RC_DRIVER_SCANCODE); - if (!dev) { - printk(KERN_ERR "budget_ci: IR interface initialisation failed\n"); - return -ENOMEM; - } - - snprintf(budget_ci->ir.name, sizeof(budget_ci->ir.name), - "Budget-CI dvb ir receiver %s", saa->name); - snprintf(budget_ci->ir.phys, sizeof(budget_ci->ir.phys), - "pci-%s/ir0", pci_name(saa->pci)); - - dev->driver_name = MODULE_NAME; - dev->device_name = budget_ci->ir.name; - dev->input_phys = budget_ci->ir.phys; - dev->input_id.bustype = BUS_PCI; - dev->input_id.version = 1; - if (saa->pci->subsystem_vendor) { - dev->input_id.vendor = saa->pci->subsystem_vendor; - dev->input_id.product = saa->pci->subsystem_device; - } else { - dev->input_id.vendor = saa->pci->vendor; - dev->input_id.product = saa->pci->device; - } - dev->dev.parent = &saa->pci->dev; - - if (rc5_device < 0) - budget_ci->ir.rc5_device = IR_DEVICE_ANY; - else - budget_ci->ir.rc5_device = rc5_device; - - /* Select keymap and address */ - switch (budget_ci->budget.dev->pci->subsystem_device) { - case 0x100c: - case 0x100f: - case 0x1011: - case 0x1012: - /* The hauppauge keymap is a superset of these remotes */ - dev->map_name = RC_MAP_HAUPPAUGE; - budget_ci->ir.full_rc5 = true; - - if (rc5_device < 0) - budget_ci->ir.rc5_device = 0x1f; - break; - case 0x1010: - case 0x1017: - case 0x1019: - case 0x101a: - case 0x101b: - /* for the Technotrend 1500 bundled remote */ - dev->map_name = RC_MAP_TT_1500; - break; - default: - /* unknown remote */ - dev->map_name = RC_MAP_BUDGET_CI_OLD; - break; - } - if (!budget_ci->ir.full_rc5) - dev->scancode_mask = 0xff; - - error = rc_register_device(dev); - if (error) { - printk(KERN_ERR "budget_ci: could not init driver for IR device (code %d)\n", error); - rc_free_device(dev); - return error; - } - - budget_ci->ir.dev = dev; - - tasklet_setup(&budget_ci->ir.msp430_irq_tasklet, msp430_ir_interrupt); - - SAA7146_IER_ENABLE(saa, MASK_06); - saa7146_setgpio(saa, 3, SAA7146_GPIO_IRQHI); - - return 0; -} - -static void msp430_ir_deinit(struct budget_ci *budget_ci) -{ - struct saa7146_dev *saa = budget_ci->budget.dev; - - SAA7146_IER_DISABLE(saa, MASK_06); - saa7146_setgpio(saa, 3, SAA7146_GPIO_INPUT); - tasklet_kill(&budget_ci->ir.msp430_irq_tasklet); - - rc_unregister_device(budget_ci->ir.dev); -} - -static int ciintf_read_attribute_mem(struct dvb_ca_en50221 *ca, int slot, int address) -{ - struct budget_ci *budget_ci = (struct budget_ci *) ca->data; - - if (slot != 0) - return -EINVAL; - - return ttpci_budget_debiread(&budget_ci->budget, DEBICICAM, - DEBIADDR_ATTR | (address & 0xfff), 1, 1, 0); -} - -static int ciintf_write_attribute_mem(struct dvb_ca_en50221 *ca, int slot, int address, u8 value) -{ - struct budget_ci *budget_ci = (struct budget_ci *) ca->data; - - if (slot != 0) - return -EINVAL; - - return ttpci_budget_debiwrite(&budget_ci->budget, DEBICICAM, - DEBIADDR_ATTR | (address & 0xfff), 1, value, 1, 0); -} - -static int ciintf_read_cam_control(struct dvb_ca_en50221 *ca, int slot, u8 address) -{ - struct budget_ci *budget_ci = (struct budget_ci *) ca->data; - - if (slot != 0) - return -EINVAL; - - return ttpci_budget_debiread(&budget_ci->budget, DEBICICAM, - DEBIADDR_IO | (address & 3), 1, 1, 0); -} - -static int ciintf_write_cam_control(struct dvb_ca_en50221 *ca, int slot, u8 address, u8 value) -{ - struct budget_ci *budget_ci = (struct budget_ci *) ca->data; - - if (slot != 0) - return -EINVAL; - - return ttpci_budget_debiwrite(&budget_ci->budget, DEBICICAM, - DEBIADDR_IO | (address & 3), 1, value, 1, 0); -} - -static int ciintf_slot_reset(struct dvb_ca_en50221 *ca, int slot) -{ - struct budget_ci *budget_ci = (struct budget_ci *) ca->data; - struct saa7146_dev *saa = budget_ci->budget.dev; - - if (slot != 0) - return -EINVAL; - - if (budget_ci->ci_irq) { - // trigger on RISING edge during reset so we know when READY is re-asserted - saa7146_setgpio(saa, 0, SAA7146_GPIO_IRQHI); - } - budget_ci->slot_status = SLOTSTATUS_RESET; - ttpci_budget_debiwrite(&budget_ci->budget, DEBICICTL, DEBIADDR_CICONTROL, 1, 0, 1, 0); - msleep(1); - ttpci_budget_debiwrite(&budget_ci->budget, DEBICICTL, DEBIADDR_CICONTROL, 1, - CICONTROL_RESET, 1, 0); - - saa7146_setgpio(saa, 1, SAA7146_GPIO_OUTHI); - ttpci_budget_set_video_port(saa, BUDGET_VIDEO_PORTB); - return 0; -} - -static int ciintf_slot_shutdown(struct dvb_ca_en50221 *ca, int slot) -{ - struct budget_ci *budget_ci = (struct budget_ci *) ca->data; - struct saa7146_dev *saa = budget_ci->budget.dev; - - if (slot != 0) - return -EINVAL; - - saa7146_setgpio(saa, 1, SAA7146_GPIO_OUTHI); - ttpci_budget_set_video_port(saa, BUDGET_VIDEO_PORTB); - return 0; -} - -static int ciintf_slot_ts_enable(struct dvb_ca_en50221 *ca, int slot) -{ - struct budget_ci *budget_ci = (struct budget_ci *) ca->data; - struct saa7146_dev *saa = budget_ci->budget.dev; - int tmp; - - if (slot != 0) - return -EINVAL; - - saa7146_setgpio(saa, 1, SAA7146_GPIO_OUTLO); - - tmp = ttpci_budget_debiread(&budget_ci->budget, DEBICICTL, DEBIADDR_CICONTROL, 1, 1, 0); - ttpci_budget_debiwrite(&budget_ci->budget, DEBICICTL, DEBIADDR_CICONTROL, 1, - tmp | CICONTROL_ENABLETS, 1, 0); - - ttpci_budget_set_video_port(saa, BUDGET_VIDEO_PORTA); - return 0; -} - -static void ciintf_interrupt(struct tasklet_struct *t) -{ - struct budget_ci *budget_ci = from_tasklet(budget_ci, t, - ciintf_irq_tasklet); - struct saa7146_dev *saa = budget_ci->budget.dev; - unsigned int flags; - - // ensure we don't get spurious IRQs during initialisation - if (!budget_ci->budget.ci_present) - return; - - // read the CAM status - flags = ttpci_budget_debiread(&budget_ci->budget, DEBICICTL, DEBIADDR_CICONTROL, 1, 1, 0); - if (flags & CICONTROL_CAMDETECT) { - - // GPIO should be set to trigger on falling edge if a CAM is present - saa7146_setgpio(saa, 0, SAA7146_GPIO_IRQLO); - - if (budget_ci->slot_status & SLOTSTATUS_NONE) { - // CAM insertion IRQ - budget_ci->slot_status = SLOTSTATUS_PRESENT; - dvb_ca_en50221_camchange_irq(&budget_ci->ca, 0, - DVB_CA_EN50221_CAMCHANGE_INSERTED); - - } else if (budget_ci->slot_status & SLOTSTATUS_RESET) { - // CAM ready (reset completed) - budget_ci->slot_status = SLOTSTATUS_READY; - dvb_ca_en50221_camready_irq(&budget_ci->ca, 0); - - } else if (budget_ci->slot_status & SLOTSTATUS_READY) { - // FR/DA IRQ - dvb_ca_en50221_frda_irq(&budget_ci->ca, 0); - } - } else { - - // trigger on rising edge if a CAM is not present - when a CAM is inserted, we - // only want to get the IRQ when it sets READY. If we trigger on the falling edge, - // the CAM might not actually be ready yet. - saa7146_setgpio(saa, 0, SAA7146_GPIO_IRQHI); - - // generate a CAM removal IRQ if we haven't already - if (budget_ci->slot_status & SLOTSTATUS_OCCUPIED) { - // CAM removal IRQ - budget_ci->slot_status = SLOTSTATUS_NONE; - dvb_ca_en50221_camchange_irq(&budget_ci->ca, 0, - DVB_CA_EN50221_CAMCHANGE_REMOVED); - } - } -} - -static int ciintf_poll_slot_status(struct dvb_ca_en50221 *ca, int slot, int open) -{ - struct budget_ci *budget_ci = (struct budget_ci *) ca->data; - unsigned int flags; - - // ensure we don't get spurious IRQs during initialisation - if (!budget_ci->budget.ci_present) - return -EINVAL; - - // read the CAM status - flags = ttpci_budget_debiread(&budget_ci->budget, DEBICICTL, DEBIADDR_CICONTROL, 1, 1, 0); - if (flags & CICONTROL_CAMDETECT) { - // mark it as present if it wasn't before - if (budget_ci->slot_status & SLOTSTATUS_NONE) { - budget_ci->slot_status = SLOTSTATUS_PRESENT; - } - - // during a RESET, we check if we can read from IO memory to see when CAM is ready - if (budget_ci->slot_status & SLOTSTATUS_RESET) { - if (ciintf_read_attribute_mem(ca, slot, 0) == 0x1d) { - budget_ci->slot_status = SLOTSTATUS_READY; - } - } - } else { - budget_ci->slot_status = SLOTSTATUS_NONE; - } - - if (budget_ci->slot_status != SLOTSTATUS_NONE) { - if (budget_ci->slot_status & SLOTSTATUS_READY) { - return DVB_CA_EN50221_POLL_CAM_PRESENT | DVB_CA_EN50221_POLL_CAM_READY; - } - return DVB_CA_EN50221_POLL_CAM_PRESENT; - } - - return 0; -} - -static int ciintf_init(struct budget_ci *budget_ci) -{ - struct saa7146_dev *saa = budget_ci->budget.dev; - int flags; - int result; - int ci_version; - int ca_flags; - - memset(&budget_ci->ca, 0, sizeof(struct dvb_ca_en50221)); - - // enable DEBI pins - saa7146_write(saa, MC1, MASK_27 | MASK_11); - - // test if it is there - ci_version = ttpci_budget_debiread(&budget_ci->budget, DEBICICTL, DEBIADDR_CIVERSION, 1, 1, 0); - if ((ci_version & 0xa0) != 0xa0) { - result = -ENODEV; - goto error; - } - - // determine whether a CAM is present or not - flags = ttpci_budget_debiread(&budget_ci->budget, DEBICICTL, DEBIADDR_CICONTROL, 1, 1, 0); - budget_ci->slot_status = SLOTSTATUS_NONE; - if (flags & CICONTROL_CAMDETECT) - budget_ci->slot_status = SLOTSTATUS_PRESENT; - - // version 0xa2 of the CI firmware doesn't generate interrupts - if (ci_version == 0xa2) { - ca_flags = 0; - budget_ci->ci_irq = 0; - } else { - ca_flags = DVB_CA_EN50221_FLAG_IRQ_CAMCHANGE | - DVB_CA_EN50221_FLAG_IRQ_FR | - DVB_CA_EN50221_FLAG_IRQ_DA; - budget_ci->ci_irq = 1; - } - - // register CI interface - budget_ci->ca.owner = THIS_MODULE; - budget_ci->ca.read_attribute_mem = ciintf_read_attribute_mem; - budget_ci->ca.write_attribute_mem = ciintf_write_attribute_mem; - budget_ci->ca.read_cam_control = ciintf_read_cam_control; - budget_ci->ca.write_cam_control = ciintf_write_cam_control; - budget_ci->ca.slot_reset = ciintf_slot_reset; - budget_ci->ca.slot_shutdown = ciintf_slot_shutdown; - budget_ci->ca.slot_ts_enable = ciintf_slot_ts_enable; - budget_ci->ca.poll_slot_status = ciintf_poll_slot_status; - budget_ci->ca.data = budget_ci; - if ((result = dvb_ca_en50221_init(&budget_ci->budget.dvb_adapter, - &budget_ci->ca, - ca_flags, 1)) != 0) { - printk("budget_ci: CI interface detected, but initialisation failed.\n"); - goto error; - } - - // Setup CI slot IRQ - if (budget_ci->ci_irq) { - tasklet_setup(&budget_ci->ciintf_irq_tasklet, ciintf_interrupt); - if (budget_ci->slot_status != SLOTSTATUS_NONE) { - saa7146_setgpio(saa, 0, SAA7146_GPIO_IRQLO); - } else { - saa7146_setgpio(saa, 0, SAA7146_GPIO_IRQHI); - } - SAA7146_IER_ENABLE(saa, MASK_03); - } - - // enable interface - ttpci_budget_debiwrite(&budget_ci->budget, DEBICICTL, DEBIADDR_CICONTROL, 1, - CICONTROL_RESET, 1, 0); - - // success! - printk("budget_ci: CI interface initialised\n"); - budget_ci->budget.ci_present = 1; - - // forge a fake CI IRQ so the CAM state is setup correctly - if (budget_ci->ci_irq) { - flags = DVB_CA_EN50221_CAMCHANGE_REMOVED; - if (budget_ci->slot_status != SLOTSTATUS_NONE) - flags = DVB_CA_EN50221_CAMCHANGE_INSERTED; - dvb_ca_en50221_camchange_irq(&budget_ci->ca, 0, flags); - } - - return 0; - -error: - saa7146_write(saa, MC1, MASK_27); - return result; -} - -static void ciintf_deinit(struct budget_ci *budget_ci) -{ - struct saa7146_dev *saa = budget_ci->budget.dev; - - // disable CI interrupts - if (budget_ci->ci_irq) { - SAA7146_IER_DISABLE(saa, MASK_03); - saa7146_setgpio(saa, 0, SAA7146_GPIO_INPUT); - tasklet_kill(&budget_ci->ciintf_irq_tasklet); - } - - // reset interface - ttpci_budget_debiwrite(&budget_ci->budget, DEBICICTL, DEBIADDR_CICONTROL, 1, 0, 1, 0); - msleep(1); - ttpci_budget_debiwrite(&budget_ci->budget, DEBICICTL, DEBIADDR_CICONTROL, 1, - CICONTROL_RESET, 1, 0); - - // disable TS data stream to CI interface - saa7146_setgpio(saa, 1, SAA7146_GPIO_INPUT); - - // release the CA device - dvb_ca_en50221_release(&budget_ci->ca); - - // disable DEBI pins - saa7146_write(saa, MC1, MASK_27); -} - -static void budget_ci_irq(struct saa7146_dev *dev, u32 * isr) -{ - struct budget_ci *budget_ci = (struct budget_ci *) dev->ext_priv; - - dprintk(8, "dev: %p, budget_ci: %p\n", dev, budget_ci); - - if (*isr & MASK_06) - tasklet_schedule(&budget_ci->ir.msp430_irq_tasklet); - - if (*isr & MASK_10) - ttpci_budget_irq10_handler(dev, isr); - - if ((*isr & MASK_03) && (budget_ci->budget.ci_present) && (budget_ci->ci_irq)) - tasklet_schedule(&budget_ci->ciintf_irq_tasklet); -} - -static u8 philips_su1278_tt_inittab[] = { - 0x01, 0x0f, - 0x02, 0x30, - 0x03, 0x00, - 0x04, 0x5b, - 0x05, 0x85, - 0x06, 0x02, - 0x07, 0x00, - 0x08, 0x02, - 0x09, 0x00, - 0x0C, 0x01, - 0x0D, 0x81, - 0x0E, 0x44, - 0x0f, 0x14, - 0x10, 0x3c, - 0x11, 0x84, - 0x12, 0xda, - 0x13, 0x97, - 0x14, 0x95, - 0x15, 0xc9, - 0x16, 0x19, - 0x17, 0x8c, - 0x18, 0x59, - 0x19, 0xf8, - 0x1a, 0xfe, - 0x1c, 0x7f, - 0x1d, 0x00, - 0x1e, 0x00, - 0x1f, 0x50, - 0x20, 0x00, - 0x21, 0x00, - 0x22, 0x00, - 0x23, 0x00, - 0x28, 0x00, - 0x29, 0x28, - 0x2a, 0x14, - 0x2b, 0x0f, - 0x2c, 0x09, - 0x2d, 0x09, - 0x31, 0x1f, - 0x32, 0x19, - 0x33, 0xfc, - 0x34, 0x93, - 0xff, 0xff -}; - -static int philips_su1278_tt_set_symbol_rate(struct dvb_frontend *fe, u32 srate, u32 ratio) -{ - stv0299_writereg(fe, 0x0e, 0x44); - if (srate >= 10000000) { - stv0299_writereg(fe, 0x13, 0x97); - stv0299_writereg(fe, 0x14, 0x95); - stv0299_writereg(fe, 0x15, 0xc9); - stv0299_writereg(fe, 0x17, 0x8c); - stv0299_writereg(fe, 0x1a, 0xfe); - stv0299_writereg(fe, 0x1c, 0x7f); - stv0299_writereg(fe, 0x2d, 0x09); - } else { - stv0299_writereg(fe, 0x13, 0x99); - stv0299_writereg(fe, 0x14, 0x8d); - stv0299_writereg(fe, 0x15, 0xce); - stv0299_writereg(fe, 0x17, 0x43); - stv0299_writereg(fe, 0x1a, 0x1d); - stv0299_writereg(fe, 0x1c, 0x12); - stv0299_writereg(fe, 0x2d, 0x05); - } - stv0299_writereg(fe, 0x0e, 0x23); - stv0299_writereg(fe, 0x0f, 0x94); - stv0299_writereg(fe, 0x10, 0x39); - stv0299_writereg(fe, 0x15, 0xc9); - - stv0299_writereg(fe, 0x1f, (ratio >> 16) & 0xff); - stv0299_writereg(fe, 0x20, (ratio >> 8) & 0xff); - stv0299_writereg(fe, 0x21, (ratio) & 0xf0); - - return 0; -} - -static int philips_su1278_tt_tuner_set_params(struct dvb_frontend *fe) -{ - struct dtv_frontend_properties *p = &fe->dtv_property_cache; - struct budget_ci *budget_ci = (struct budget_ci *) fe->dvb->priv; - u32 div; - u8 buf[4]; - struct i2c_msg msg = {.addr = 0x60,.flags = 0,.buf = buf,.len = sizeof(buf) }; - - if ((p->frequency < 950000) || (p->frequency > 2150000)) - return -EINVAL; - - div = (p->frequency + (500 - 1)) / 500; /* round correctly */ - buf[0] = (div >> 8) & 0x7f; - buf[1] = div & 0xff; - buf[2] = 0x80 | ((div & 0x18000) >> 10) | 2; - buf[3] = 0x20; - - if (p->symbol_rate < 4000000) - buf[3] |= 1; - - if (p->frequency < 1250000) - buf[3] |= 0; - else if (p->frequency < 1550000) - buf[3] |= 0x40; - else if (p->frequency < 2050000) - buf[3] |= 0x80; - else if (p->frequency < 2150000) - buf[3] |= 0xC0; - - if (fe->ops.i2c_gate_ctrl) - fe->ops.i2c_gate_ctrl(fe, 1); - if (i2c_transfer(&budget_ci->budget.i2c_adap, &msg, 1) != 1) - return -EIO; - return 0; -} - -static const struct stv0299_config philips_su1278_tt_config = { - - .demod_address = 0x68, - .inittab = philips_su1278_tt_inittab, - .mclk = 64000000UL, - .invert = 0, - .skip_reinit = 1, - .lock_output = STV0299_LOCKOUTPUT_1, - .volt13_op0_op1 = STV0299_VOLT13_OP1, - .min_delay_ms = 50, - .set_symbol_rate = philips_su1278_tt_set_symbol_rate, -}; - - - -static int philips_tdm1316l_tuner_init(struct dvb_frontend *fe) -{ - struct budget_ci *budget_ci = (struct budget_ci *) fe->dvb->priv; - static u8 td1316_init[] = { 0x0b, 0xf5, 0x85, 0xab }; - static u8 disable_mc44BC374c[] = { 0x1d, 0x74, 0xa0, 0x68 }; - struct i2c_msg tuner_msg = {.addr = budget_ci->tuner_pll_address,.flags = 0,.buf = td1316_init,.len = - sizeof(td1316_init) }; - - // setup PLL configuration - if (fe->ops.i2c_gate_ctrl) - fe->ops.i2c_gate_ctrl(fe, 1); - if (i2c_transfer(&budget_ci->budget.i2c_adap, &tuner_msg, 1) != 1) - return -EIO; - msleep(1); - - // disable the mc44BC374c (do not check for errors) - tuner_msg.addr = 0x65; - tuner_msg.buf = disable_mc44BC374c; - tuner_msg.len = sizeof(disable_mc44BC374c); - if (fe->ops.i2c_gate_ctrl) - fe->ops.i2c_gate_ctrl(fe, 1); - if (i2c_transfer(&budget_ci->budget.i2c_adap, &tuner_msg, 1) != 1) { - if (fe->ops.i2c_gate_ctrl) - fe->ops.i2c_gate_ctrl(fe, 1); - i2c_transfer(&budget_ci->budget.i2c_adap, &tuner_msg, 1); - } - - return 0; -} - -static int philips_tdm1316l_tuner_set_params(struct dvb_frontend *fe) -{ - struct dtv_frontend_properties *p = &fe->dtv_property_cache; - struct budget_ci *budget_ci = (struct budget_ci *) fe->dvb->priv; - u8 tuner_buf[4]; - struct i2c_msg tuner_msg = {.addr = budget_ci->tuner_pll_address,.flags = 0,.buf = tuner_buf,.len = sizeof(tuner_buf) }; - int tuner_frequency = 0; - u8 band, cp, filter; - - // determine charge pump - tuner_frequency = p->frequency + 36130000; - if (tuner_frequency < 87000000) - return -EINVAL; - else if (tuner_frequency < 130000000) - cp = 3; - else if (tuner_frequency < 160000000) - cp = 5; - else if (tuner_frequency < 200000000) - cp = 6; - else if (tuner_frequency < 290000000) - cp = 3; - else if (tuner_frequency < 420000000) - cp = 5; - else if (tuner_frequency < 480000000) - cp = 6; - else if (tuner_frequency < 620000000) - cp = 3; - else if (tuner_frequency < 830000000) - cp = 5; - else if (tuner_frequency < 895000000) - cp = 7; - else - return -EINVAL; - - // determine band - if (p->frequency < 49000000) - return -EINVAL; - else if (p->frequency < 159000000) - band = 1; - else if (p->frequency < 444000000) - band = 2; - else if (p->frequency < 861000000) - band = 4; - else - return -EINVAL; - - // setup PLL filter and TDA9889 - switch (p->bandwidth_hz) { - case 6000000: - tda1004x_writereg(fe, 0x0C, 0x14); - filter = 0; - break; - - case 7000000: - tda1004x_writereg(fe, 0x0C, 0x80); - filter = 0; - break; - - case 8000000: - tda1004x_writereg(fe, 0x0C, 0x14); - filter = 1; - break; - - default: - return -EINVAL; - } - - // calculate divisor - // ((36130000+((1000000/6)/2)) + Finput)/(1000000/6) - tuner_frequency = (((p->frequency / 1000) * 6) + 217280) / 1000; - - // setup tuner buffer - tuner_buf[0] = tuner_frequency >> 8; - tuner_buf[1] = tuner_frequency & 0xff; - tuner_buf[2] = 0xca; - tuner_buf[3] = (cp << 5) | (filter << 3) | band; - - if (fe->ops.i2c_gate_ctrl) - fe->ops.i2c_gate_ctrl(fe, 1); - if (i2c_transfer(&budget_ci->budget.i2c_adap, &tuner_msg, 1) != 1) - return -EIO; - - msleep(1); - return 0; -} - -static int philips_tdm1316l_request_firmware(struct dvb_frontend *fe, - const struct firmware **fw, char *name) -{ - struct budget_ci *budget_ci = (struct budget_ci *) fe->dvb->priv; - - return request_firmware(fw, name, &budget_ci->budget.dev->pci->dev); -} - -static struct tda1004x_config philips_tdm1316l_config = { - - .demod_address = 0x8, - .invert = 0, - .invert_oclk = 0, - .xtal_freq = TDA10046_XTAL_4M, - .agc_config = TDA10046_AGC_DEFAULT, - .if_freq = TDA10046_FREQ_3617, - .request_firmware = philips_tdm1316l_request_firmware, -}; - -static struct tda1004x_config philips_tdm1316l_config_invert = { - - .demod_address = 0x8, - .invert = 1, - .invert_oclk = 0, - .xtal_freq = TDA10046_XTAL_4M, - .agc_config = TDA10046_AGC_DEFAULT, - .if_freq = TDA10046_FREQ_3617, - .request_firmware = philips_tdm1316l_request_firmware, -}; - -static int dvbc_philips_tdm1316l_tuner_set_params(struct dvb_frontend *fe) -{ - struct dtv_frontend_properties *p = &fe->dtv_property_cache; - struct budget_ci *budget_ci = (struct budget_ci *) fe->dvb->priv; - u8 tuner_buf[5]; - struct i2c_msg tuner_msg = {.addr = budget_ci->tuner_pll_address, - .flags = 0, - .buf = tuner_buf, - .len = sizeof(tuner_buf) }; - int tuner_frequency = 0; - u8 band, cp, filter; - - // determine charge pump - tuner_frequency = p->frequency + 36125000; - if (tuner_frequency < 87000000) - return -EINVAL; - else if (tuner_frequency < 130000000) { - cp = 3; - band = 1; - } else if (tuner_frequency < 160000000) { - cp = 5; - band = 1; - } else if (tuner_frequency < 200000000) { - cp = 6; - band = 1; - } else if (tuner_frequency < 290000000) { - cp = 3; - band = 2; - } else if (tuner_frequency < 420000000) { - cp = 5; - band = 2; - } else if (tuner_frequency < 480000000) { - cp = 6; - band = 2; - } else if (tuner_frequency < 620000000) { - cp = 3; - band = 4; - } else if (tuner_frequency < 830000000) { - cp = 5; - band = 4; - } else if (tuner_frequency < 895000000) { - cp = 7; - band = 4; - } else - return -EINVAL; - - // assume PLL filter should always be 8MHz for the moment. - filter = 1; - - // calculate divisor - tuner_frequency = (p->frequency + 36125000 + (62500/2)) / 62500; - - // setup tuner buffer - tuner_buf[0] = tuner_frequency >> 8; - tuner_buf[1] = tuner_frequency & 0xff; - tuner_buf[2] = 0xc8; - tuner_buf[3] = (cp << 5) | (filter << 3) | band; - tuner_buf[4] = 0x80; - - if (fe->ops.i2c_gate_ctrl) - fe->ops.i2c_gate_ctrl(fe, 1); - if (i2c_transfer(&budget_ci->budget.i2c_adap, &tuner_msg, 1) != 1) - return -EIO; - - msleep(50); - - if (fe->ops.i2c_gate_ctrl) - fe->ops.i2c_gate_ctrl(fe, 1); - if (i2c_transfer(&budget_ci->budget.i2c_adap, &tuner_msg, 1) != 1) - return -EIO; - - msleep(1); - - return 0; -} - -static u8 dvbc_philips_tdm1316l_inittab[] = { - 0x80, 0x01, - 0x80, 0x00, - 0x81, 0x01, - 0x81, 0x00, - 0x00, 0x09, - 0x01, 0x69, - 0x03, 0x00, - 0x04, 0x00, - 0x07, 0x00, - 0x08, 0x00, - 0x20, 0x00, - 0x21, 0x40, - 0x22, 0x00, - 0x23, 0x00, - 0x24, 0x40, - 0x25, 0x88, - 0x30, 0xff, - 0x31, 0x00, - 0x32, 0xff, - 0x33, 0x00, - 0x34, 0x50, - 0x35, 0x7f, - 0x36, 0x00, - 0x37, 0x20, - 0x38, 0x00, - 0x40, 0x1c, - 0x41, 0xff, - 0x42, 0x29, - 0x43, 0x20, - 0x44, 0xff, - 0x45, 0x00, - 0x46, 0x00, - 0x49, 0x04, - 0x4a, 0x00, - 0x4b, 0x7b, - 0x52, 0x30, - 0x55, 0xae, - 0x56, 0x47, - 0x57, 0xe1, - 0x58, 0x3a, - 0x5a, 0x1e, - 0x5b, 0x34, - 0x60, 0x00, - 0x63, 0x00, - 0x64, 0x00, - 0x65, 0x00, - 0x66, 0x00, - 0x67, 0x00, - 0x68, 0x00, - 0x69, 0x00, - 0x6a, 0x02, - 0x6b, 0x00, - 0x70, 0xff, - 0x71, 0x00, - 0x72, 0x00, - 0x73, 0x00, - 0x74, 0x0c, - 0x80, 0x00, - 0x81, 0x00, - 0x82, 0x00, - 0x83, 0x00, - 0x84, 0x04, - 0x85, 0x80, - 0x86, 0x24, - 0x87, 0x78, - 0x88, 0x10, - 0x89, 0x00, - 0x90, 0x01, - 0x91, 0x01, - 0xa0, 0x04, - 0xa1, 0x00, - 0xa2, 0x00, - 0xb0, 0x91, - 0xb1, 0x0b, - 0xc0, 0x53, - 0xc1, 0x70, - 0xc2, 0x12, - 0xd0, 0x00, - 0xd1, 0x00, - 0xd2, 0x00, - 0xd3, 0x00, - 0xd4, 0x00, - 0xd5, 0x00, - 0xde, 0x00, - 0xdf, 0x00, - 0x61, 0x38, - 0x62, 0x0a, - 0x53, 0x13, - 0x59, 0x08, - 0xff, 0xff, -}; - -static struct stv0297_config dvbc_philips_tdm1316l_config = { - .demod_address = 0x1c, - .inittab = dvbc_philips_tdm1316l_inittab, - .invert = 0, - .stop_during_read = 1, -}; - -static struct tda10023_config tda10023_config = { - .demod_address = 0xc, - .invert = 0, - .xtal = 16000000, - .pll_m = 11, - .pll_p = 3, - .pll_n = 1, - .deltaf = 0xa511, -}; - -static struct tda827x_config tda827x_config = { - .config = 0, -}; - -/* TT S2-3200 DVB-S (STB0899) Inittab */ -static const struct stb0899_s1_reg tt3200_stb0899_s1_init_1[] = { - - { STB0899_DEV_ID , 0x81 }, - { STB0899_DISCNTRL1 , 0x32 }, - { STB0899_DISCNTRL2 , 0x80 }, - { STB0899_DISRX_ST0 , 0x04 }, - { STB0899_DISRX_ST1 , 0x00 }, - { STB0899_DISPARITY , 0x00 }, - { STB0899_DISSTATUS , 0x20 }, - { STB0899_DISF22 , 0x8c }, - { STB0899_DISF22RX , 0x9a }, - { STB0899_SYSREG , 0x0b }, - { STB0899_ACRPRESC , 0x11 }, - { STB0899_ACRDIV1 , 0x0a }, - { STB0899_ACRDIV2 , 0x05 }, - { STB0899_DACR1 , 0x00 }, - { STB0899_DACR2 , 0x00 }, - { STB0899_OUTCFG , 0x00 }, - { STB0899_MODECFG , 0x00 }, - { STB0899_IRQSTATUS_3 , 0x30 }, - { STB0899_IRQSTATUS_2 , 0x00 }, - { STB0899_IRQSTATUS_1 , 0x00 }, - { STB0899_IRQSTATUS_0 , 0x00 }, - { STB0899_IRQMSK_3 , 0xf3 }, - { STB0899_IRQMSK_2 , 0xfc }, - { STB0899_IRQMSK_1 , 0xff }, - { STB0899_IRQMSK_0 , 0xff }, - { STB0899_IRQCFG , 0x00 }, - { STB0899_I2CCFG , 0x88 }, - { STB0899_I2CRPT , 0x48 }, /* 12k Pullup, Repeater=16, Stop=disabled */ - { STB0899_IOPVALUE5 , 0x00 }, - { STB0899_IOPVALUE4 , 0x20 }, - { STB0899_IOPVALUE3 , 0xc9 }, - { STB0899_IOPVALUE2 , 0x90 }, - { STB0899_IOPVALUE1 , 0x40 }, - { STB0899_IOPVALUE0 , 0x00 }, - { STB0899_GPIO00CFG , 0x82 }, - { STB0899_GPIO01CFG , 0x82 }, - { STB0899_GPIO02CFG , 0x82 }, - { STB0899_GPIO03CFG , 0x82 }, - { STB0899_GPIO04CFG , 0x82 }, - { STB0899_GPIO05CFG , 0x82 }, - { STB0899_GPIO06CFG , 0x82 }, - { STB0899_GPIO07CFG , 0x82 }, - { STB0899_GPIO08CFG , 0x82 }, - { STB0899_GPIO09CFG , 0x82 }, - { STB0899_GPIO10CFG , 0x82 }, - { STB0899_GPIO11CFG , 0x82 }, - { STB0899_GPIO12CFG , 0x82 }, - { STB0899_GPIO13CFG , 0x82 }, - { STB0899_GPIO14CFG , 0x82 }, - { STB0899_GPIO15CFG , 0x82 }, - { STB0899_GPIO16CFG , 0x82 }, - { STB0899_GPIO17CFG , 0x82 }, - { STB0899_GPIO18CFG , 0x82 }, - { STB0899_GPIO19CFG , 0x82 }, - { STB0899_GPIO20CFG , 0x82 }, - { STB0899_SDATCFG , 0xb8 }, - { STB0899_SCLTCFG , 0xba }, - { STB0899_AGCRFCFG , 0x1c }, /* 0x11 */ - { STB0899_GPIO22 , 0x82 }, /* AGCBB2CFG */ - { STB0899_GPIO21 , 0x91 }, /* AGCBB1CFG */ - { STB0899_DIRCLKCFG , 0x82 }, - { STB0899_CLKOUT27CFG , 0x7e }, - { STB0899_STDBYCFG , 0x82 }, - { STB0899_CS0CFG , 0x82 }, - { STB0899_CS1CFG , 0x82 }, - { STB0899_DISEQCOCFG , 0x20 }, - { STB0899_GPIO32CFG , 0x82 }, - { STB0899_GPIO33CFG , 0x82 }, - { STB0899_GPIO34CFG , 0x82 }, - { STB0899_GPIO35CFG , 0x82 }, - { STB0899_GPIO36CFG , 0x82 }, - { STB0899_GPIO37CFG , 0x82 }, - { STB0899_GPIO38CFG , 0x82 }, - { STB0899_GPIO39CFG , 0x82 }, - { STB0899_NCOARSE , 0x15 }, /* 0x15 = 27 Mhz Clock, F/3 = 198MHz, F/6 = 99MHz */ - { STB0899_SYNTCTRL , 0x02 }, /* 0x00 = CLK from CLKI, 0x02 = CLK from XTALI */ - { STB0899_FILTCTRL , 0x00 }, - { STB0899_SYSCTRL , 0x00 }, - { STB0899_STOPCLK1 , 0x20 }, - { STB0899_STOPCLK2 , 0x00 }, - { STB0899_INTBUFSTATUS , 0x00 }, - { STB0899_INTBUFCTRL , 0x0a }, - { 0xffff , 0xff }, -}; - -static const struct stb0899_s1_reg tt3200_stb0899_s1_init_3[] = { - { STB0899_DEMOD , 0x00 }, - { STB0899_RCOMPC , 0xc9 }, - { STB0899_AGC1CN , 0x41 }, - { STB0899_AGC1REF , 0x10 }, - { STB0899_RTC , 0x7a }, - { STB0899_TMGCFG , 0x4e }, - { STB0899_AGC2REF , 0x34 }, - { STB0899_TLSR , 0x84 }, - { STB0899_CFD , 0xc7 }, - { STB0899_ACLC , 0x87 }, - { STB0899_BCLC , 0x94 }, - { STB0899_EQON , 0x41 }, - { STB0899_LDT , 0xdd }, - { STB0899_LDT2 , 0xc9 }, - { STB0899_EQUALREF , 0xb4 }, - { STB0899_TMGRAMP , 0x10 }, - { STB0899_TMGTHD , 0x30 }, - { STB0899_IDCCOMP , 0xfb }, - { STB0899_QDCCOMP , 0x03 }, - { STB0899_POWERI , 0x3b }, - { STB0899_POWERQ , 0x3d }, - { STB0899_RCOMP , 0x81 }, - { STB0899_AGCIQIN , 0x80 }, - { STB0899_AGC2I1 , 0x04 }, - { STB0899_AGC2I2 , 0xf5 }, - { STB0899_TLIR , 0x25 }, - { STB0899_RTF , 0x80 }, - { STB0899_DSTATUS , 0x00 }, - { STB0899_LDI , 0xca }, - { STB0899_CFRM , 0xf1 }, - { STB0899_CFRL , 0xf3 }, - { STB0899_NIRM , 0x2a }, - { STB0899_NIRL , 0x05 }, - { STB0899_ISYMB , 0x17 }, - { STB0899_QSYMB , 0xfa }, - { STB0899_SFRH , 0x2f }, - { STB0899_SFRM , 0x68 }, - { STB0899_SFRL , 0x40 }, - { STB0899_SFRUPH , 0x2f }, - { STB0899_SFRUPM , 0x68 }, - { STB0899_SFRUPL , 0x40 }, - { STB0899_EQUAI1 , 0xfd }, - { STB0899_EQUAQ1 , 0x04 }, - { STB0899_EQUAI2 , 0x0f }, - { STB0899_EQUAQ2 , 0xff }, - { STB0899_EQUAI3 , 0xdf }, - { STB0899_EQUAQ3 , 0xfa }, - { STB0899_EQUAI4 , 0x37 }, - { STB0899_EQUAQ4 , 0x0d }, - { STB0899_EQUAI5 , 0xbd }, - { STB0899_EQUAQ5 , 0xf7 }, - { STB0899_DSTATUS2 , 0x00 }, - { STB0899_VSTATUS , 0x00 }, - { STB0899_VERROR , 0xff }, - { STB0899_IQSWAP , 0x2a }, - { STB0899_ECNT1M , 0x00 }, - { STB0899_ECNT1L , 0x00 }, - { STB0899_ECNT2M , 0x00 }, - { STB0899_ECNT2L , 0x00 }, - { STB0899_ECNT3M , 0x00 }, - { STB0899_ECNT3L , 0x00 }, - { STB0899_FECAUTO1 , 0x06 }, - { STB0899_FECM , 0x01 }, - { STB0899_VTH12 , 0xf0 }, - { STB0899_VTH23 , 0xa0 }, - { STB0899_VTH34 , 0x78 }, - { STB0899_VTH56 , 0x4e }, - { STB0899_VTH67 , 0x48 }, - { STB0899_VTH78 , 0x38 }, - { STB0899_PRVIT , 0xff }, - { STB0899_VITSYNC , 0x19 }, - { STB0899_RSULC , 0xb1 }, /* DVB = 0xb1, DSS = 0xa1 */ - { STB0899_TSULC , 0x42 }, - { STB0899_RSLLC , 0x40 }, - { STB0899_TSLPL , 0x12 }, - { STB0899_TSCFGH , 0x0c }, - { STB0899_TSCFGM , 0x00 }, - { STB0899_TSCFGL , 0x0c }, - { STB0899_TSOUT , 0x4d }, /* 0x0d for CAM */ - { STB0899_RSSYNCDEL , 0x00 }, - { STB0899_TSINHDELH , 0x02 }, - { STB0899_TSINHDELM , 0x00 }, - { STB0899_TSINHDELL , 0x00 }, - { STB0899_TSLLSTKM , 0x00 }, - { STB0899_TSLLSTKL , 0x00 }, - { STB0899_TSULSTKM , 0x00 }, - { STB0899_TSULSTKL , 0xab }, - { STB0899_PCKLENUL , 0x00 }, - { STB0899_PCKLENLL , 0xcc }, - { STB0899_RSPCKLEN , 0xcc }, - { STB0899_TSSTATUS , 0x80 }, - { STB0899_ERRCTRL1 , 0xb6 }, - { STB0899_ERRCTRL2 , 0x96 }, - { STB0899_ERRCTRL3 , 0x89 }, - { STB0899_DMONMSK1 , 0x27 }, - { STB0899_DMONMSK0 , 0x03 }, - { STB0899_DEMAPVIT , 0x5c }, - { STB0899_PLPARM , 0x1f }, - { STB0899_PDELCTRL , 0x48 }, - { STB0899_PDELCTRL2 , 0x00 }, - { STB0899_BBHCTRL1 , 0x00 }, - { STB0899_BBHCTRL2 , 0x00 }, - { STB0899_HYSTTHRESH , 0x77 }, - { STB0899_MATCSTM , 0x00 }, - { STB0899_MATCSTL , 0x00 }, - { STB0899_UPLCSTM , 0x00 }, - { STB0899_UPLCSTL , 0x00 }, - { STB0899_DFLCSTM , 0x00 }, - { STB0899_DFLCSTL , 0x00 }, - { STB0899_SYNCCST , 0x00 }, - { STB0899_SYNCDCSTM , 0x00 }, - { STB0899_SYNCDCSTL , 0x00 }, - { STB0899_ISI_ENTRY , 0x00 }, - { STB0899_ISI_BIT_EN , 0x00 }, - { STB0899_MATSTRM , 0x00 }, - { STB0899_MATSTRL , 0x00 }, - { STB0899_UPLSTRM , 0x00 }, - { STB0899_UPLSTRL , 0x00 }, - { STB0899_DFLSTRM , 0x00 }, - { STB0899_DFLSTRL , 0x00 }, - { STB0899_SYNCSTR , 0x00 }, - { STB0899_SYNCDSTRM , 0x00 }, - { STB0899_SYNCDSTRL , 0x00 }, - { STB0899_CFGPDELSTATUS1 , 0x10 }, - { STB0899_CFGPDELSTATUS2 , 0x00 }, - { STB0899_BBFERRORM , 0x00 }, - { STB0899_BBFERRORL , 0x00 }, - { STB0899_UPKTERRORM , 0x00 }, - { STB0899_UPKTERRORL , 0x00 }, - { 0xffff , 0xff }, -}; - -static struct stb0899_config tt3200_config = { - .init_dev = tt3200_stb0899_s1_init_1, - .init_s2_demod = stb0899_s2_init_2, - .init_s1_demod = tt3200_stb0899_s1_init_3, - .init_s2_fec = stb0899_s2_init_4, - .init_tst = stb0899_s1_init_5, - - .postproc = NULL, - - .demod_address = 0x68, - - .xtal_freq = 27000000, - .inversion = IQ_SWAP_ON, - - .lo_clk = 76500000, - .hi_clk = 99000000, - - .esno_ave = STB0899_DVBS2_ESNO_AVE, - .esno_quant = STB0899_DVBS2_ESNO_QUANT, - .avframes_coarse = STB0899_DVBS2_AVFRAMES_COARSE, - .avframes_fine = STB0899_DVBS2_AVFRAMES_FINE, - .miss_threshold = STB0899_DVBS2_MISS_THRESHOLD, - .uwp_threshold_acq = STB0899_DVBS2_UWP_THRESHOLD_ACQ, - .uwp_threshold_track = STB0899_DVBS2_UWP_THRESHOLD_TRACK, - .uwp_threshold_sof = STB0899_DVBS2_UWP_THRESHOLD_SOF, - .sof_search_timeout = STB0899_DVBS2_SOF_SEARCH_TIMEOUT, - - .btr_nco_bits = STB0899_DVBS2_BTR_NCO_BITS, - .btr_gain_shift_offset = STB0899_DVBS2_BTR_GAIN_SHIFT_OFFSET, - .crl_nco_bits = STB0899_DVBS2_CRL_NCO_BITS, - .ldpc_max_iter = STB0899_DVBS2_LDPC_MAX_ITER, - - .tuner_get_frequency = stb6100_get_frequency, - .tuner_set_frequency = stb6100_set_frequency, - .tuner_set_bandwidth = stb6100_set_bandwidth, - .tuner_get_bandwidth = stb6100_get_bandwidth, - .tuner_set_rfsiggain = NULL -}; - -static struct stb6100_config tt3200_stb6100_config = { - .tuner_address = 0x60, - .refclock = 27000000, -}; - -static void frontend_init(struct budget_ci *budget_ci) -{ - switch (budget_ci->budget.dev->pci->subsystem_device) { - case 0x100c: // Hauppauge/TT Nova-CI budget (stv0299/ALPS BSRU6(tsa5059)) - budget_ci->budget.dvb_frontend = - dvb_attach(stv0299_attach, &alps_bsru6_config, &budget_ci->budget.i2c_adap); - if (budget_ci->budget.dvb_frontend) { - budget_ci->budget.dvb_frontend->ops.tuner_ops.set_params = alps_bsru6_tuner_set_params; - budget_ci->budget.dvb_frontend->tuner_priv = &budget_ci->budget.i2c_adap; - break; - } - break; - - case 0x100f: // Hauppauge/TT Nova-CI budget (stv0299b/Philips su1278(tsa5059)) - budget_ci->budget.dvb_frontend = - dvb_attach(stv0299_attach, &philips_su1278_tt_config, &budget_ci->budget.i2c_adap); - if (budget_ci->budget.dvb_frontend) { - budget_ci->budget.dvb_frontend->ops.tuner_ops.set_params = philips_su1278_tt_tuner_set_params; - break; - } - break; - - case 0x1010: // TT DVB-C CI budget (stv0297/Philips tdm1316l(tda6651tt)) - budget_ci->tuner_pll_address = 0x61; - budget_ci->budget.dvb_frontend = - dvb_attach(stv0297_attach, &dvbc_philips_tdm1316l_config, &budget_ci->budget.i2c_adap); - if (budget_ci->budget.dvb_frontend) { - budget_ci->budget.dvb_frontend->ops.tuner_ops.set_params = dvbc_philips_tdm1316l_tuner_set_params; - break; - } - break; - - case 0x1011: // Hauppauge/TT Nova-T budget (tda10045/Philips tdm1316l(tda6651tt) + TDA9889) - budget_ci->tuner_pll_address = 0x63; - budget_ci->budget.dvb_frontend = - dvb_attach(tda10045_attach, &philips_tdm1316l_config, &budget_ci->budget.i2c_adap); - if (budget_ci->budget.dvb_frontend) { - budget_ci->budget.dvb_frontend->ops.tuner_ops.init = philips_tdm1316l_tuner_init; - budget_ci->budget.dvb_frontend->ops.tuner_ops.set_params = philips_tdm1316l_tuner_set_params; - break; - } - break; - - case 0x1012: // TT DVB-T CI budget (tda10046/Philips tdm1316l(tda6651tt)) - budget_ci->tuner_pll_address = 0x60; - budget_ci->budget.dvb_frontend = - dvb_attach(tda10046_attach, &philips_tdm1316l_config_invert, &budget_ci->budget.i2c_adap); - if (budget_ci->budget.dvb_frontend) { - budget_ci->budget.dvb_frontend->ops.tuner_ops.init = philips_tdm1316l_tuner_init; - budget_ci->budget.dvb_frontend->ops.tuner_ops.set_params = philips_tdm1316l_tuner_set_params; - break; - } - break; - - case 0x1017: // TT S-1500 PCI - budget_ci->budget.dvb_frontend = dvb_attach(stv0299_attach, &alps_bsbe1_config, &budget_ci->budget.i2c_adap); - if (budget_ci->budget.dvb_frontend) { - budget_ci->budget.dvb_frontend->ops.tuner_ops.set_params = alps_bsbe1_tuner_set_params; - budget_ci->budget.dvb_frontend->tuner_priv = &budget_ci->budget.i2c_adap; - - budget_ci->budget.dvb_frontend->ops.dishnetwork_send_legacy_command = NULL; - if (dvb_attach(lnbp21_attach, budget_ci->budget.dvb_frontend, &budget_ci->budget.i2c_adap, LNBP21_LLC, 0) == NULL) { - printk("%s: No LNBP21 found!\n", __func__); - dvb_frontend_detach(budget_ci->budget.dvb_frontend); - budget_ci->budget.dvb_frontend = NULL; - } - } - break; - - case 0x101a: /* TT Budget-C-1501 (philips tda10023/philips tda8274A) */ - budget_ci->budget.dvb_frontend = dvb_attach(tda10023_attach, &tda10023_config, &budget_ci->budget.i2c_adap, 0x48); - if (budget_ci->budget.dvb_frontend) { - if (dvb_attach(tda827x_attach, budget_ci->budget.dvb_frontend, 0x61, &budget_ci->budget.i2c_adap, &tda827x_config) == NULL) { - printk(KERN_ERR "%s: No tda827x found!\n", __func__); - dvb_frontend_detach(budget_ci->budget.dvb_frontend); - budget_ci->budget.dvb_frontend = NULL; - } - } - break; - - case 0x101b: /* TT S-1500B (BSBE1-D01A - STV0288/STB6000/LNBP21) */ - budget_ci->budget.dvb_frontend = dvb_attach(stv0288_attach, &stv0288_bsbe1_d01a_config, &budget_ci->budget.i2c_adap); - if (budget_ci->budget.dvb_frontend) { - if (dvb_attach(stb6000_attach, budget_ci->budget.dvb_frontend, 0x63, &budget_ci->budget.i2c_adap)) { - if (!dvb_attach(lnbp21_attach, budget_ci->budget.dvb_frontend, &budget_ci->budget.i2c_adap, 0, 0)) { - printk(KERN_ERR "%s: No LNBP21 found!\n", __func__); - dvb_frontend_detach(budget_ci->budget.dvb_frontend); - budget_ci->budget.dvb_frontend = NULL; - } - } else { - printk(KERN_ERR "%s: No STB6000 found!\n", __func__); - dvb_frontend_detach(budget_ci->budget.dvb_frontend); - budget_ci->budget.dvb_frontend = NULL; - } - } - break; - - case 0x1019: // TT S2-3200 PCI - /* - * NOTE! on some STB0899 versions, the internal PLL takes a longer time - * to settle, aka LOCK. On the older revisions of the chip, we don't see - * this, as a result on the newer chips the entire clock tree, will not - * be stable after a freshly POWER 'ed up situation. - * In this case, we should RESET the STB0899 (Active LOW) and wait for - * PLL stabilization. - * - * On the TT S2 3200 and clones, the STB0899 demodulator's RESETB is - * connected to the SAA7146 GPIO, GPIO2, Pin 142 - */ - /* Reset Demodulator */ - saa7146_setgpio(budget_ci->budget.dev, 2, SAA7146_GPIO_OUTLO); - /* Wait for everything to die */ - msleep(50); - /* Pull it up out of Reset state */ - saa7146_setgpio(budget_ci->budget.dev, 2, SAA7146_GPIO_OUTHI); - /* Wait for PLL to stabilize */ - msleep(250); - /* - * PLL state should be stable now. Ideally, we should check - * for PLL LOCK status. But well, never mind! - */ - budget_ci->budget.dvb_frontend = dvb_attach(stb0899_attach, &tt3200_config, &budget_ci->budget.i2c_adap); - if (budget_ci->budget.dvb_frontend) { - if (dvb_attach(stb6100_attach, budget_ci->budget.dvb_frontend, &tt3200_stb6100_config, &budget_ci->budget.i2c_adap)) { - if (!dvb_attach(lnbp21_attach, budget_ci->budget.dvb_frontend, &budget_ci->budget.i2c_adap, 0, 0)) { - printk("%s: No LNBP21 found!\n", __func__); - dvb_frontend_detach(budget_ci->budget.dvb_frontend); - budget_ci->budget.dvb_frontend = NULL; - } - } else { - dvb_frontend_detach(budget_ci->budget.dvb_frontend); - budget_ci->budget.dvb_frontend = NULL; - } - } - break; - - } - - if (budget_ci->budget.dvb_frontend == NULL) { - printk("budget-ci: A frontend driver was not found for device [%04x:%04x] subsystem [%04x:%04x]\n", - budget_ci->budget.dev->pci->vendor, - budget_ci->budget.dev->pci->device, - budget_ci->budget.dev->pci->subsystem_vendor, - budget_ci->budget.dev->pci->subsystem_device); - } else { - if (dvb_register_frontend - (&budget_ci->budget.dvb_adapter, budget_ci->budget.dvb_frontend)) { - printk("budget-ci: Frontend registration failed!\n"); - dvb_frontend_detach(budget_ci->budget.dvb_frontend); - budget_ci->budget.dvb_frontend = NULL; - } - } -} - -static int budget_ci_attach(struct saa7146_dev *dev, struct saa7146_pci_extension_data *info) -{ - struct budget_ci *budget_ci; - int err; - - budget_ci = kzalloc(sizeof(struct budget_ci), GFP_KERNEL); - if (!budget_ci) { - err = -ENOMEM; - goto out1; - } - - dprintk(2, "budget_ci: %p\n", budget_ci); - - dev->ext_priv = budget_ci; - - err = ttpci_budget_init(&budget_ci->budget, dev, info, THIS_MODULE, - adapter_nr); - if (err) - goto out2; - - err = msp430_ir_init(budget_ci); - if (err) - goto out3; - - ciintf_init(budget_ci); - - budget_ci->budget.dvb_adapter.priv = budget_ci; - frontend_init(budget_ci); - - ttpci_budget_init_hooks(&budget_ci->budget); - - return 0; - -out3: - ttpci_budget_deinit(&budget_ci->budget); -out2: - kfree(budget_ci); -out1: - return err; -} - -static int budget_ci_detach(struct saa7146_dev *dev) -{ - struct budget_ci *budget_ci = (struct budget_ci *) dev->ext_priv; - struct saa7146_dev *saa = budget_ci->budget.dev; - int err; - - if (budget_ci->budget.ci_present) - ciintf_deinit(budget_ci); - msp430_ir_deinit(budget_ci); - if (budget_ci->budget.dvb_frontend) { - dvb_unregister_frontend(budget_ci->budget.dvb_frontend); - dvb_frontend_detach(budget_ci->budget.dvb_frontend); - } - err = ttpci_budget_deinit(&budget_ci->budget); - - // disable frontend and CI interface - saa7146_setgpio(saa, 2, SAA7146_GPIO_INPUT); - - kfree(budget_ci); - - return err; -} - -static struct saa7146_extension budget_extension; - -MAKE_BUDGET_INFO(ttbs2, "TT-Budget/S-1500 PCI", BUDGET_TT); -MAKE_BUDGET_INFO(ttbci, "TT-Budget/WinTV-NOVA-CI PCI", BUDGET_TT_HW_DISEQC); -MAKE_BUDGET_INFO(ttbt2, "TT-Budget/WinTV-NOVA-T PCI", BUDGET_TT); -MAKE_BUDGET_INFO(ttbtci, "TT-Budget-T-CI PCI", BUDGET_TT); -MAKE_BUDGET_INFO(ttbcci, "TT-Budget-C-CI PCI", BUDGET_TT); -MAKE_BUDGET_INFO(ttc1501, "TT-Budget C-1501 PCI", BUDGET_TT); -MAKE_BUDGET_INFO(tt3200, "TT-Budget S2-3200 PCI", BUDGET_TT); -MAKE_BUDGET_INFO(ttbs1500b, "TT-Budget S-1500B PCI", BUDGET_TT); - -static const struct pci_device_id pci_tbl[] = { - MAKE_EXTENSION_PCI(ttbci, 0x13c2, 0x100c), - MAKE_EXTENSION_PCI(ttbci, 0x13c2, 0x100f), - MAKE_EXTENSION_PCI(ttbcci, 0x13c2, 0x1010), - MAKE_EXTENSION_PCI(ttbt2, 0x13c2, 0x1011), - MAKE_EXTENSION_PCI(ttbtci, 0x13c2, 0x1012), - MAKE_EXTENSION_PCI(ttbs2, 0x13c2, 0x1017), - MAKE_EXTENSION_PCI(ttc1501, 0x13c2, 0x101a), - MAKE_EXTENSION_PCI(tt3200, 0x13c2, 0x1019), - MAKE_EXTENSION_PCI(ttbs1500b, 0x13c2, 0x101b), - { - .vendor = 0, - } -}; - -MODULE_DEVICE_TABLE(pci, pci_tbl); - -static struct saa7146_extension budget_extension = { - .name = "budget_ci dvb", - .flags = SAA7146_USE_I2C_IRQ, - - .module = THIS_MODULE, - .pci_tbl = &pci_tbl[0], - .attach = budget_ci_attach, - .detach = budget_ci_detach, - - .irq_mask = MASK_03 | MASK_06 | MASK_10, - .irq_func = budget_ci_irq, -}; - -static int __init budget_ci_init(void) -{ - return saa7146_register_extension(&budget_extension); -} - -static void __exit budget_ci_exit(void) -{ - saa7146_unregister_extension(&budget_extension); -} - -module_init(budget_ci_init); -module_exit(budget_ci_exit); - -MODULE_LICENSE("GPL"); -MODULE_AUTHOR("Michael Hunold, Jack Thomasson, Andrew de Quincey, others"); -MODULE_DESCRIPTION("driver for the SAA7146 based so-called budget PCI DVB cards w/ CI-module produced by Siemens, Technotrend, Hauppauge"); diff --git a/drivers/staging/media/deprecated/saa7146/ttpci/budget-core.c b/drivers/staging/media/deprecated/saa7146/ttpci/budget-core.c deleted file mode 100644 index 5d5796f24469..000000000000 --- a/drivers/staging/media/deprecated/saa7146/ttpci/budget-core.c +++ /dev/null @@ -1,603 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/* - * budget-core.c: driver for the SAA7146 based Budget DVB cards - * - * Compiled from various sources by Michael Hunold - * - * Copyright (C) 2002 Ralph Metzler - * - * Copyright (C) 1999-2002 Ralph Metzler - * & Marcus Metzler for convergence integrated media GmbH - * - * 26feb2004 Support for FS Activy Card (Grundig tuner) by - * Michael Dreher , - * Oliver Endriss , - * Andreas 'randy' Weinberger - * - * the project's page is at https://linuxtv.org - */ - - -#include "budget.h" -#include "ttpci-eeprom.h" - -#define TS_WIDTH (2 * TS_SIZE) -#define TS_WIDTH_ACTIVY TS_SIZE -#define TS_WIDTH_DVBC TS_SIZE -#define TS_HEIGHT_MASK 0xf00 -#define TS_HEIGHT_MASK_ACTIVY 0xc00 -#define TS_HEIGHT_MASK_DVBC 0xe00 -#define TS_MIN_BUFSIZE_K 188 -#define TS_MAX_BUFSIZE_K 1410 -#define TS_MAX_BUFSIZE_K_ACTIVY 564 -#define TS_MAX_BUFSIZE_K_DVBC 1316 -#define BUFFER_WARNING_WAIT (30*HZ) - -int budget_debug; -static int dma_buffer_size = TS_MIN_BUFSIZE_K; -module_param_named(debug, budget_debug, int, 0644); -module_param_named(bufsize, dma_buffer_size, int, 0444); -MODULE_PARM_DESC(debug, "Turn on/off budget debugging (default:off)."); -MODULE_PARM_DESC(bufsize, "DMA buffer size in KB, default: 188, min: 188, max: 1410 (Activy: 564)"); - -/**************************************************************************** - * TT budget / WinTV Nova - ****************************************************************************/ - -static int stop_ts_capture(struct budget *budget) -{ - dprintk(2, "budget: %p\n", budget); - - saa7146_write(budget->dev, MC1, MASK_20); // DMA3 off - SAA7146_IER_DISABLE(budget->dev, MASK_10); - return 0; -} - -static int start_ts_capture(struct budget *budget) -{ - struct saa7146_dev *dev = budget->dev; - - dprintk(2, "budget: %p\n", budget); - - if (!budget->feeding || !budget->fe_synced) - return 0; - - saa7146_write(dev, MC1, MASK_20); // DMA3 off - - memset(budget->grabbing, 0x00, budget->buffer_size); - - saa7146_write(dev, PCI_BT_V1, 0x001c0000 | (saa7146_read(dev, PCI_BT_V1) & ~0x001f0000)); - - budget->ttbp = 0; - - /* - * Signal path on the Activy: - * - * tuner -> SAA7146 port A -> SAA7146 BRS -> SAA7146 DMA3 -> memory - * - * Since the tuner feeds 204 bytes packets into the SAA7146, - * DMA3 is configured to strip the trailing 16 FEC bytes: - * Pitch: 188, NumBytes3: 188, NumLines3: 1024 - */ - - switch(budget->card->type) { - case BUDGET_FS_ACTIVY: - saa7146_write(dev, DD1_INIT, 0x04000000); - saa7146_write(dev, MC2, (MASK_09 | MASK_25)); - saa7146_write(dev, BRS_CTRL, 0x00000000); - break; - case BUDGET_PATCH: - saa7146_write(dev, DD1_INIT, 0x00000200); - saa7146_write(dev, MC2, (MASK_10 | MASK_26)); - saa7146_write(dev, BRS_CTRL, 0x60000000); - break; - case BUDGET_CIN1200C_MK3: - case BUDGET_KNC1C_MK3: - case BUDGET_KNC1C_TDA10024: - case BUDGET_KNC1CP_MK3: - if (budget->video_port == BUDGET_VIDEO_PORTA) { - saa7146_write(dev, DD1_INIT, 0x06000200); - saa7146_write(dev, MC2, (MASK_09 | MASK_25 | MASK_10 | MASK_26)); - saa7146_write(dev, BRS_CTRL, 0x00000000); - } else { - saa7146_write(dev, DD1_INIT, 0x00000600); - saa7146_write(dev, MC2, (MASK_09 | MASK_25 | MASK_10 | MASK_26)); - saa7146_write(dev, BRS_CTRL, 0x60000000); - } - break; - default: - if (budget->video_port == BUDGET_VIDEO_PORTA) { - saa7146_write(dev, DD1_INIT, 0x06000200); - saa7146_write(dev, MC2, (MASK_09 | MASK_25 | MASK_10 | MASK_26)); - saa7146_write(dev, BRS_CTRL, 0x00000000); - } else { - saa7146_write(dev, DD1_INIT, 0x02000600); - saa7146_write(dev, MC2, (MASK_09 | MASK_25 | MASK_10 | MASK_26)); - saa7146_write(dev, BRS_CTRL, 0x60000000); - } - } - - saa7146_write(dev, MC2, (MASK_08 | MASK_24)); - mdelay(10); - - saa7146_write(dev, BASE_ODD3, 0); - if (budget->buffer_size > budget->buffer_height * budget->buffer_width) { - // using odd/even buffers - saa7146_write(dev, BASE_EVEN3, budget->buffer_height * budget->buffer_width); - } else { - // using a single buffer - saa7146_write(dev, BASE_EVEN3, 0); - } - saa7146_write(dev, PROT_ADDR3, budget->buffer_size); - saa7146_write(dev, BASE_PAGE3, budget->pt.dma | ME1 | 0x90); - - saa7146_write(dev, PITCH3, budget->buffer_width); - saa7146_write(dev, NUM_LINE_BYTE3, - (budget->buffer_height << 16) | budget->buffer_width); - - saa7146_write(dev, MC2, (MASK_04 | MASK_20)); - - SAA7146_ISR_CLEAR(budget->dev, MASK_10); /* VPE */ - SAA7146_IER_ENABLE(budget->dev, MASK_10); /* VPE */ - saa7146_write(dev, MC1, (MASK_04 | MASK_20)); /* DMA3 on */ - - return 0; -} - -static int budget_read_fe_status(struct dvb_frontend *fe, - enum fe_status *status) -{ - struct budget *budget = (struct budget *) fe->dvb->priv; - int synced; - int ret; - - if (budget->read_fe_status) - ret = budget->read_fe_status(fe, status); - else - ret = -EINVAL; - - if (!ret) { - synced = (*status & FE_HAS_LOCK); - if (synced != budget->fe_synced) { - budget->fe_synced = synced; - spin_lock(&budget->feedlock); - if (synced) - start_ts_capture(budget); - else - stop_ts_capture(budget); - spin_unlock(&budget->feedlock); - } - } - return ret; -} - -static void vpeirq(struct tasklet_struct *t) -{ - struct budget *budget = from_tasklet(budget, t, vpe_tasklet); - u8 *mem = (u8 *) (budget->grabbing); - u32 olddma = budget->ttbp; - u32 newdma = saa7146_read(budget->dev, PCI_VDP3); - u32 count; - - /* Ensure streamed PCI data is synced to CPU */ - dma_sync_sg_for_cpu(&budget->dev->pci->dev, budget->pt.slist, - budget->pt.nents, DMA_FROM_DEVICE); - - /* nearest lower position divisible by 188 */ - newdma -= newdma % 188; - - if (newdma >= budget->buffer_size) - return; - - budget->ttbp = newdma; - - if (budget->feeding == 0 || newdma == olddma) - return; - - if (newdma > olddma) { /* no wraparound, dump olddma..newdma */ - count = newdma - olddma; - dvb_dmx_swfilter_packets(&budget->demux, mem + olddma, count / 188); - } else { /* wraparound, dump olddma..buflen and 0..newdma */ - count = budget->buffer_size - olddma; - dvb_dmx_swfilter_packets(&budget->demux, mem + olddma, count / 188); - count += newdma; - dvb_dmx_swfilter_packets(&budget->demux, mem, newdma / 188); - } - - if (count > budget->buffer_warning_threshold) - budget->buffer_warnings++; - - if (budget->buffer_warnings && time_after(jiffies, budget->buffer_warning_time)) { - printk("%s %s: used %d times >80%% of buffer (%u bytes now)\n", - budget->dev->name, __func__, budget->buffer_warnings, count); - budget->buffer_warning_time = jiffies + BUFFER_WARNING_WAIT; - budget->buffer_warnings = 0; - } -} - - -static int ttpci_budget_debiread_nolock(struct budget *budget, u32 config, - int addr, int count, int nobusyloop) -{ - struct saa7146_dev *saa = budget->dev; - int result; - - result = saa7146_wait_for_debi_done(saa, nobusyloop); - if (result < 0) - return result; - - saa7146_write(saa, DEBI_COMMAND, (count << 17) | 0x10000 | (addr & 0xffff)); - saa7146_write(saa, DEBI_CONFIG, config); - saa7146_write(saa, DEBI_PAGE, 0); - saa7146_write(saa, MC2, (2 << 16) | 2); - - result = saa7146_wait_for_debi_done(saa, nobusyloop); - if (result < 0) - return result; - - result = saa7146_read(saa, DEBI_AD); - result &= (0xffffffffUL >> ((4 - count) * 8)); - return result; -} - -int ttpci_budget_debiread(struct budget *budget, u32 config, int addr, int count, - int uselocks, int nobusyloop) -{ - if (count > 4 || count <= 0) - return 0; - - if (uselocks) { - unsigned long flags; - int result; - - spin_lock_irqsave(&budget->debilock, flags); - result = ttpci_budget_debiread_nolock(budget, config, addr, - count, nobusyloop); - spin_unlock_irqrestore(&budget->debilock, flags); - return result; - } - return ttpci_budget_debiread_nolock(budget, config, addr, - count, nobusyloop); -} - -static int ttpci_budget_debiwrite_nolock(struct budget *budget, u32 config, - int addr, int count, u32 value, int nobusyloop) -{ - struct saa7146_dev *saa = budget->dev; - int result; - - result = saa7146_wait_for_debi_done(saa, nobusyloop); - if (result < 0) - return result; - - saa7146_write(saa, DEBI_COMMAND, (count << 17) | 0x00000 | (addr & 0xffff)); - saa7146_write(saa, DEBI_CONFIG, config); - saa7146_write(saa, DEBI_PAGE, 0); - saa7146_write(saa, DEBI_AD, value); - saa7146_write(saa, MC2, (2 << 16) | 2); - - result = saa7146_wait_for_debi_done(saa, nobusyloop); - return result < 0 ? result : 0; -} - -int ttpci_budget_debiwrite(struct budget *budget, u32 config, int addr, - int count, u32 value, int uselocks, int nobusyloop) -{ - if (count > 4 || count <= 0) - return 0; - - if (uselocks) { - unsigned long flags; - int result; - - spin_lock_irqsave(&budget->debilock, flags); - result = ttpci_budget_debiwrite_nolock(budget, config, addr, - count, value, nobusyloop); - spin_unlock_irqrestore(&budget->debilock, flags); - return result; - } - return ttpci_budget_debiwrite_nolock(budget, config, addr, - count, value, nobusyloop); -} - - -/**************************************************************************** - * DVB API SECTION - ****************************************************************************/ - -static int budget_start_feed(struct dvb_demux_feed *feed) -{ - struct dvb_demux *demux = feed->demux; - struct budget *budget = (struct budget *) demux->priv; - int status = 0; - - dprintk(2, "budget: %p\n", budget); - - if (!demux->dmx.frontend) - return -EINVAL; - - spin_lock(&budget->feedlock); - feed->pusi_seen = false; /* have a clean section start */ - if (budget->feeding++ == 0) - status = start_ts_capture(budget); - spin_unlock(&budget->feedlock); - return status; -} - -static int budget_stop_feed(struct dvb_demux_feed *feed) -{ - struct dvb_demux *demux = feed->demux; - struct budget *budget = (struct budget *) demux->priv; - int status = 0; - - dprintk(2, "budget: %p\n", budget); - - spin_lock(&budget->feedlock); - if (--budget->feeding == 0) - status = stop_ts_capture(budget); - spin_unlock(&budget->feedlock); - return status; -} - -static int budget_register(struct budget *budget) -{ - struct dvb_demux *dvbdemux = &budget->demux; - int ret; - - dprintk(2, "budget: %p\n", budget); - - dvbdemux->priv = (void *) budget; - - dvbdemux->filternum = 256; - dvbdemux->feednum = 256; - dvbdemux->start_feed = budget_start_feed; - dvbdemux->stop_feed = budget_stop_feed; - dvbdemux->write_to_decoder = NULL; - - dvbdemux->dmx.capabilities = (DMX_TS_FILTERING | DMX_SECTION_FILTERING | - DMX_MEMORY_BASED_FILTERING); - - dvb_dmx_init(&budget->demux); - - budget->dmxdev.filternum = 256; - budget->dmxdev.demux = &dvbdemux->dmx; - budget->dmxdev.capabilities = 0; - - dvb_dmxdev_init(&budget->dmxdev, &budget->dvb_adapter); - - budget->hw_frontend.source = DMX_FRONTEND_0; - - ret = dvbdemux->dmx.add_frontend(&dvbdemux->dmx, &budget->hw_frontend); - - if (ret < 0) - goto err_release_dmx; - - budget->mem_frontend.source = DMX_MEMORY_FE; - ret = dvbdemux->dmx.add_frontend(&dvbdemux->dmx, &budget->mem_frontend); - if (ret < 0) - goto err_release_dmx; - - ret = dvbdemux->dmx.connect_frontend(&dvbdemux->dmx, &budget->hw_frontend); - if (ret < 0) - goto err_release_dmx; - - dvb_net_init(&budget->dvb_adapter, &budget->dvb_net, &dvbdemux->dmx); - - return 0; - -err_release_dmx: - dvb_dmxdev_release(&budget->dmxdev); - dvb_dmx_release(&budget->demux); - return ret; -} - -static void budget_unregister(struct budget *budget) -{ - struct dvb_demux *dvbdemux = &budget->demux; - - dprintk(2, "budget: %p\n", budget); - - dvb_net_release(&budget->dvb_net); - - dvbdemux->dmx.close(&dvbdemux->dmx); - dvbdemux->dmx.remove_frontend(&dvbdemux->dmx, &budget->hw_frontend); - dvbdemux->dmx.remove_frontend(&dvbdemux->dmx, &budget->mem_frontend); - - dvb_dmxdev_release(&budget->dmxdev); - dvb_dmx_release(&budget->demux); -} - -int ttpci_budget_init(struct budget *budget, struct saa7146_dev *dev, - struct saa7146_pci_extension_data *info, - struct module *owner, short *adapter_nums) -{ - int ret = 0; - struct budget_info *bi = info->ext_priv; - int max_bufsize; - int height_mask; - - memset(budget, 0, sizeof(struct budget)); - - dprintk(2, "dev: %p, budget: %p\n", dev, budget); - - budget->card = bi; - budget->dev = (struct saa7146_dev *) dev; - - switch(budget->card->type) { - case BUDGET_FS_ACTIVY: - budget->buffer_width = TS_WIDTH_ACTIVY; - max_bufsize = TS_MAX_BUFSIZE_K_ACTIVY; - height_mask = TS_HEIGHT_MASK_ACTIVY; - break; - - case BUDGET_KNC1C: - case BUDGET_KNC1CP: - case BUDGET_CIN1200C: - case BUDGET_KNC1C_MK3: - case BUDGET_KNC1C_TDA10024: - case BUDGET_KNC1CP_MK3: - case BUDGET_CIN1200C_MK3: - budget->buffer_width = TS_WIDTH_DVBC; - max_bufsize = TS_MAX_BUFSIZE_K_DVBC; - height_mask = TS_HEIGHT_MASK_DVBC; - break; - - default: - budget->buffer_width = TS_WIDTH; - max_bufsize = TS_MAX_BUFSIZE_K; - height_mask = TS_HEIGHT_MASK; - } - - if (dma_buffer_size < TS_MIN_BUFSIZE_K) - dma_buffer_size = TS_MIN_BUFSIZE_K; - else if (dma_buffer_size > max_bufsize) - dma_buffer_size = max_bufsize; - - budget->buffer_height = dma_buffer_size * 1024 / budget->buffer_width; - if (budget->buffer_height > 0xfff) { - budget->buffer_height /= 2; - budget->buffer_height &= height_mask; - budget->buffer_size = 2 * budget->buffer_height * budget->buffer_width; - } else { - budget->buffer_height &= height_mask; - budget->buffer_size = budget->buffer_height * budget->buffer_width; - } - budget->buffer_warning_threshold = budget->buffer_size * 80/100; - budget->buffer_warnings = 0; - budget->buffer_warning_time = jiffies; - - dprintk(2, "%s: buffer type = %s, width = %d, height = %d\n", - budget->dev->name, - budget->buffer_size > budget->buffer_width * budget->buffer_height ? "odd/even" : "single", - budget->buffer_width, budget->buffer_height); - printk("%s: dma buffer size %u\n", budget->dev->name, budget->buffer_size); - - ret = dvb_register_adapter(&budget->dvb_adapter, budget->card->name, - owner, &budget->dev->pci->dev, adapter_nums); - if (ret < 0) - return ret; - - /* set dd1 stream a & b */ - saa7146_write(dev, DD1_STREAM_B, 0x00000000); - saa7146_write(dev, MC2, (MASK_09 | MASK_25)); - saa7146_write(dev, MC2, (MASK_10 | MASK_26)); - saa7146_write(dev, DD1_INIT, 0x02000000); - saa7146_write(dev, MC2, (MASK_09 | MASK_25 | MASK_10 | MASK_26)); - - if (bi->type != BUDGET_FS_ACTIVY) - budget->video_port = BUDGET_VIDEO_PORTB; - else - budget->video_port = BUDGET_VIDEO_PORTA; - spin_lock_init(&budget->feedlock); - spin_lock_init(&budget->debilock); - - /* the Siemens DVB needs this if you want to have the i2c chips - get recognized before the main driver is loaded */ - if (bi->type != BUDGET_FS_ACTIVY) - saa7146_write(dev, GPIO_CTRL, 0x500000); /* GPIO 3 = 1 */ - - strscpy(budget->i2c_adap.name, budget->card->name, - sizeof(budget->i2c_adap.name)); - - saa7146_i2c_adapter_prepare(dev, &budget->i2c_adap, SAA7146_I2C_BUS_BIT_RATE_120); - strscpy(budget->i2c_adap.name, budget->card->name, - sizeof(budget->i2c_adap.name)); - - if (i2c_add_adapter(&budget->i2c_adap) < 0) { - ret = -ENOMEM; - goto err_dvb_unregister; - } - - ttpci_eeprom_parse_mac(&budget->i2c_adap, budget->dvb_adapter.proposed_mac); - - budget->grabbing = saa7146_vmalloc_build_pgtable(dev->pci, budget->buffer_size, &budget->pt); - if (NULL == budget->grabbing) { - ret = -ENOMEM; - goto err_del_i2c; - } - - saa7146_write(dev, PCI_BT_V1, 0x001c0000); - /* upload all */ - saa7146_write(dev, GPIO_CTRL, 0x000000); - - tasklet_setup(&budget->vpe_tasklet, vpeirq); - - /* frontend power on */ - if (bi->type != BUDGET_FS_ACTIVY) - saa7146_setgpio(dev, 2, SAA7146_GPIO_OUTHI); - - if ((ret = budget_register(budget)) == 0) - return 0; /* Everything OK */ - - /* An error occurred, cleanup resources */ - saa7146_vfree_destroy_pgtable(dev->pci, budget->grabbing, &budget->pt); - -err_del_i2c: - i2c_del_adapter(&budget->i2c_adap); - -err_dvb_unregister: - dvb_unregister_adapter(&budget->dvb_adapter); - - return ret; -} - -void ttpci_budget_init_hooks(struct budget *budget) -{ - if (budget->dvb_frontend && !budget->read_fe_status) { - budget->read_fe_status = budget->dvb_frontend->ops.read_status; - budget->dvb_frontend->ops.read_status = budget_read_fe_status; - } -} - -int ttpci_budget_deinit(struct budget *budget) -{ - struct saa7146_dev *dev = budget->dev; - - dprintk(2, "budget: %p\n", budget); - - budget_unregister(budget); - - tasklet_kill(&budget->vpe_tasklet); - - saa7146_vfree_destroy_pgtable(dev->pci, budget->grabbing, &budget->pt); - - i2c_del_adapter(&budget->i2c_adap); - - dvb_unregister_adapter(&budget->dvb_adapter); - - return 0; -} - -void ttpci_budget_irq10_handler(struct saa7146_dev *dev, u32 * isr) -{ - struct budget *budget = (struct budget *) dev->ext_priv; - - dprintk(8, "dev: %p, budget: %p\n", dev, budget); - - if (*isr & MASK_10) - tasklet_schedule(&budget->vpe_tasklet); -} - -void ttpci_budget_set_video_port(struct saa7146_dev *dev, int video_port) -{ - struct budget *budget = (struct budget *) dev->ext_priv; - - spin_lock(&budget->feedlock); - budget->video_port = video_port; - if (budget->feeding) { - stop_ts_capture(budget); - start_ts_capture(budget); - } - spin_unlock(&budget->feedlock); -} - -EXPORT_SYMBOL_GPL(ttpci_budget_debiread); -EXPORT_SYMBOL_GPL(ttpci_budget_debiwrite); -EXPORT_SYMBOL_GPL(ttpci_budget_init); -EXPORT_SYMBOL_GPL(ttpci_budget_init_hooks); -EXPORT_SYMBOL_GPL(ttpci_budget_deinit); -EXPORT_SYMBOL_GPL(ttpci_budget_irq10_handler); -EXPORT_SYMBOL_GPL(ttpci_budget_set_video_port); -EXPORT_SYMBOL_GPL(budget_debug); - -MODULE_LICENSE("GPL"); diff --git a/drivers/staging/media/deprecated/saa7146/ttpci/budget.c b/drivers/staging/media/deprecated/saa7146/ttpci/budget.c deleted file mode 100644 index a88711a3ac7f..000000000000 --- a/drivers/staging/media/deprecated/saa7146/ttpci/budget.c +++ /dev/null @@ -1,883 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/* - * budget.c: driver for the SAA7146 based Budget DVB cards - * - * Compiled from various sources by Michael Hunold - * - * Copyright (C) 2002 Ralph Metzler - * - * Copyright (C) 1999-2002 Ralph Metzler - * & Marcus Metzler for convergence integrated media GmbH - * - * 26feb2004 Support for FS Activy Card (Grundig tuner) by - * Michael Dreher , - * Oliver Endriss and - * Andreas 'randy' Weinberger - * - * the project's page is at https://linuxtv.org - */ - -#include "budget.h" -#include "stv0299.h" -#include "ves1x93.h" -#include "ves1820.h" -#include "l64781.h" -#include "tda8083.h" -#include "s5h1420.h" -#include "tda10086.h" -#include "tda826x.h" -#include "lnbp21.h" -#include "bsru6.h" -#include "bsbe1.h" -#include "tdhd1.h" -#include "stv6110x.h" -#include "stv090x.h" -#include "isl6423.h" -#include "lnbh24.h" - - -static int diseqc_method; -module_param(diseqc_method, int, 0444); -MODULE_PARM_DESC(diseqc_method, "Select DiSEqC method for subsystem id 13c2:1003, 0: default, 1: more reliable (for newer revisions only)"); - -DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); - -static void Set22K (struct budget *budget, int state) -{ - struct saa7146_dev *dev=budget->dev; - dprintk(2, "budget: %p\n", budget); - saa7146_setgpio(dev, 3, (state ? SAA7146_GPIO_OUTHI : SAA7146_GPIO_OUTLO)); -} - -/* Diseqc functions only for TT Budget card */ -/* taken from the Skyvision DVB driver by - Ralph Metzler */ - -static void DiseqcSendBit (struct budget *budget, int data) -{ - struct saa7146_dev *dev=budget->dev; - dprintk(2, "budget: %p\n", budget); - - saa7146_setgpio(dev, 3, SAA7146_GPIO_OUTHI); - udelay(data ? 500 : 1000); - saa7146_setgpio(dev, 3, SAA7146_GPIO_OUTLO); - udelay(data ? 1000 : 500); -} - -static void DiseqcSendByte (struct budget *budget, int data) -{ - int i, par=1, d; - - dprintk(2, "budget: %p\n", budget); - - for (i=7; i>=0; i--) { - d = (data>>i)&1; - par ^= d; - DiseqcSendBit(budget, d); - } - - DiseqcSendBit(budget, par); -} - -static int SendDiSEqCMsg (struct budget *budget, int len, u8 *msg, unsigned long burst) -{ - struct saa7146_dev *dev=budget->dev; - int i; - - dprintk(2, "budget: %p\n", budget); - - saa7146_setgpio(dev, 3, SAA7146_GPIO_OUTLO); - mdelay(16); - - for (i=0; idev; - - dprintk(2, "budget: %p\n", budget); - - switch (voltage) { - case SEC_VOLTAGE_13: - saa7146_setgpio(dev, 1, SAA7146_GPIO_OUTHI); - saa7146_setgpio(dev, 2, SAA7146_GPIO_OUTLO); - break; - case SEC_VOLTAGE_18: - saa7146_setgpio(dev, 1, SAA7146_GPIO_OUTHI); - saa7146_setgpio(dev, 2, SAA7146_GPIO_OUTHI); - break; - case SEC_VOLTAGE_OFF: - saa7146_setgpio(dev, 1, SAA7146_GPIO_OUTLO); - break; - default: - return -EINVAL; - } - - return 0; -} - -static int siemens_budget_set_voltage(struct dvb_frontend *fe, - enum fe_sec_voltage voltage) -{ - struct budget* budget = (struct budget*) fe->dvb->priv; - - return SetVoltage_Activy (budget, voltage); -} - -static int budget_set_tone(struct dvb_frontend *fe, - enum fe_sec_tone_mode tone) -{ - struct budget* budget = (struct budget*) fe->dvb->priv; - - switch (tone) { - case SEC_TONE_ON: - Set22K (budget, 1); - break; - - case SEC_TONE_OFF: - Set22K (budget, 0); - break; - - default: - return -EINVAL; - } - - return 0; -} - -static int budget_diseqc_send_master_cmd(struct dvb_frontend* fe, struct dvb_diseqc_master_cmd* cmd) -{ - struct budget* budget = (struct budget*) fe->dvb->priv; - - SendDiSEqCMsg (budget, cmd->msg_len, cmd->msg, 0); - - return 0; -} - -static int budget_diseqc_send_burst(struct dvb_frontend *fe, - enum fe_sec_mini_cmd minicmd) -{ - struct budget* budget = (struct budget*) fe->dvb->priv; - - SendDiSEqCMsg (budget, 0, NULL, minicmd); - - return 0; -} - -static int alps_bsrv2_tuner_set_params(struct dvb_frontend *fe) -{ - struct dtv_frontend_properties *c = &fe->dtv_property_cache; - struct budget* budget = (struct budget*) fe->dvb->priv; - u8 pwr = 0; - u8 buf[4]; - struct i2c_msg msg = { .addr = 0x61, .flags = 0, .buf = buf, .len = sizeof(buf) }; - u32 div = (c->frequency + 479500) / 125; - - if (c->frequency > 2000000) - pwr = 3; - else if (c->frequency > 1800000) - pwr = 2; - else if (c->frequency > 1600000) - pwr = 1; - else if (c->frequency > 1200000) - pwr = 0; - else if (c->frequency >= 1100000) - pwr = 1; - else pwr = 2; - - buf[0] = (div >> 8) & 0x7f; - buf[1] = div & 0xff; - buf[2] = ((div & 0x18000) >> 10) | 0x95; - buf[3] = (pwr << 6) | 0x30; - - // NOTE: since we're using a prescaler of 2, we set the - // divisor frequency to 62.5kHz and divide by 125 above - - if (fe->ops.i2c_gate_ctrl) - fe->ops.i2c_gate_ctrl(fe, 1); - if (i2c_transfer (&budget->i2c_adap, &msg, 1) != 1) return -EIO; - return 0; -} - -static struct ves1x93_config alps_bsrv2_config = -{ - .demod_address = 0x08, - .xin = 90100000UL, - .invert_pwm = 0, -}; - -static int alps_tdbe2_tuner_set_params(struct dvb_frontend *fe) -{ - struct dtv_frontend_properties *c = &fe->dtv_property_cache; - struct budget* budget = (struct budget*) fe->dvb->priv; - u32 div; - u8 data[4]; - struct i2c_msg msg = { .addr = 0x62, .flags = 0, .buf = data, .len = sizeof(data) }; - - div = (c->frequency + 35937500 + 31250) / 62500; - - data[0] = (div >> 8) & 0x7f; - data[1] = div & 0xff; - data[2] = 0x85 | ((div >> 10) & 0x60); - data[3] = (c->frequency < 174000000 ? 0x88 : c->frequency < 470000000 ? 0x84 : 0x81); - - if (fe->ops.i2c_gate_ctrl) - fe->ops.i2c_gate_ctrl(fe, 1); - if (i2c_transfer (&budget->i2c_adap, &msg, 1) != 1) return -EIO; - return 0; -} - -static struct ves1820_config alps_tdbe2_config = { - .demod_address = 0x09, - .xin = 57840000UL, - .invert = 1, - .selagc = VES1820_SELAGC_SIGNAMPERR, -}; - -static int grundig_29504_401_tuner_set_params(struct dvb_frontend *fe) -{ - struct dtv_frontend_properties *c = &fe->dtv_property_cache; - struct budget *budget = fe->dvb->priv; - u8 *tuner_addr = fe->tuner_priv; - u32 div; - u8 cfg, cpump, band_select; - u8 data[4]; - struct i2c_msg msg = { .flags = 0, .buf = data, .len = sizeof(data) }; - - if (tuner_addr) - msg.addr = *tuner_addr; - else - msg.addr = 0x61; - - div = (36125000 + c->frequency) / 166666; - - cfg = 0x88; - - if (c->frequency < 175000000) - cpump = 2; - else if (c->frequency < 390000000) - cpump = 1; - else if (c->frequency < 470000000) - cpump = 2; - else if (c->frequency < 750000000) - cpump = 1; - else - cpump = 3; - - if (c->frequency < 175000000) - band_select = 0x0e; - else if (c->frequency < 470000000) - band_select = 0x05; - else - band_select = 0x03; - - data[0] = (div >> 8) & 0x7f; - data[1] = div & 0xff; - data[2] = ((div >> 10) & 0x60) | cfg; - data[3] = (cpump << 6) | band_select; - - if (fe->ops.i2c_gate_ctrl) - fe->ops.i2c_gate_ctrl(fe, 1); - if (i2c_transfer (&budget->i2c_adap, &msg, 1) != 1) return -EIO; - return 0; -} - -static struct l64781_config grundig_29504_401_config = { - .demod_address = 0x55, -}; - -static struct l64781_config grundig_29504_401_config_activy = { - .demod_address = 0x54, -}; - -static u8 tuner_address_grundig_29504_401_activy = 0x60; - -static int grundig_29504_451_tuner_set_params(struct dvb_frontend *fe) -{ - struct dtv_frontend_properties *c = &fe->dtv_property_cache; - struct budget* budget = (struct budget*) fe->dvb->priv; - u32 div; - u8 data[4]; - struct i2c_msg msg = { .addr = 0x61, .flags = 0, .buf = data, .len = sizeof(data) }; - - div = c->frequency / 125; - data[0] = (div >> 8) & 0x7f; - data[1] = div & 0xff; - data[2] = 0x8e; - data[3] = 0x00; - - if (fe->ops.i2c_gate_ctrl) - fe->ops.i2c_gate_ctrl(fe, 1); - if (i2c_transfer (&budget->i2c_adap, &msg, 1) != 1) return -EIO; - return 0; -} - -static struct tda8083_config grundig_29504_451_config = { - .demod_address = 0x68, -}; - -static int s5h1420_tuner_set_params(struct dvb_frontend *fe) -{ - struct dtv_frontend_properties *c = &fe->dtv_property_cache; - struct budget* budget = (struct budget*) fe->dvb->priv; - u32 div; - u8 data[4]; - struct i2c_msg msg = { .addr = 0x61, .flags = 0, .buf = data, .len = sizeof(data) }; - - div = c->frequency / 1000; - data[0] = (div >> 8) & 0x7f; - data[1] = div & 0xff; - data[2] = 0xc2; - - if (div < 1450) - data[3] = 0x00; - else if (div < 1850) - data[3] = 0x40; - else if (div < 2000) - data[3] = 0x80; - else - data[3] = 0xc0; - - if (fe->ops.i2c_gate_ctrl) - fe->ops.i2c_gate_ctrl(fe, 1); - if (i2c_transfer (&budget->i2c_adap, &msg, 1) != 1) return -EIO; - - return 0; -} - -static struct s5h1420_config s5h1420_config = { - .demod_address = 0x53, - .invert = 1, - .cdclk_polarity = 1, -}; - -static struct tda10086_config tda10086_config = { - .demod_address = 0x0e, - .invert = 0, - .diseqc_tone = 1, - .xtal_freq = TDA10086_XTAL_16M, -}; - -static const struct stv0299_config alps_bsru6_config_activy = { - .demod_address = 0x68, - .inittab = alps_bsru6_inittab, - .mclk = 88000000UL, - .invert = 1, - .op0_off = 1, - .min_delay_ms = 100, - .set_symbol_rate = alps_bsru6_set_symbol_rate, -}; - -static const struct stv0299_config alps_bsbe1_config_activy = { - .demod_address = 0x68, - .inittab = alps_bsbe1_inittab, - .mclk = 88000000UL, - .invert = 1, - .op0_off = 1, - .min_delay_ms = 100, - .set_symbol_rate = alps_bsbe1_set_symbol_rate, -}; - -static int alps_tdhd1_204_request_firmware(struct dvb_frontend *fe, const struct firmware **fw, char *name) -{ - struct budget *budget = (struct budget *)fe->dvb->priv; - - return request_firmware(fw, name, &budget->dev->pci->dev); -} - - -static int i2c_readreg(struct i2c_adapter *i2c, u8 adr, u8 reg) -{ - u8 val; - struct i2c_msg msg[] = { - { .addr = adr, .flags = 0, .buf = ®, .len = 1 }, - { .addr = adr, .flags = I2C_M_RD, .buf = &val, .len = 1 } - }; - - return (i2c_transfer(i2c, msg, 2) != 2) ? -EIO : val; -} - -static u8 read_pwm(struct budget* budget) -{ - u8 b = 0xff; - u8 pwm; - struct i2c_msg msg[] = { { .addr = 0x50,.flags = 0,.buf = &b,.len = 1 }, - { .addr = 0x50,.flags = I2C_M_RD,.buf = &pwm,.len = 1} }; - - if ((i2c_transfer(&budget->i2c_adap, msg, 2) != 2) || (pwm == 0xff)) - pwm = 0x48; - - return pwm; -} - -static struct stv090x_config tt1600_stv090x_config = { - .device = STV0903, - .demod_mode = STV090x_SINGLE, - .clk_mode = STV090x_CLK_EXT, - - .xtal = 13500000, - .address = 0x68, - - .ts1_mode = STV090x_TSMODE_DVBCI, - .ts2_mode = STV090x_TSMODE_SERIAL_CONTINUOUS, - - .repeater_level = STV090x_RPTLEVEL_16, - - .tuner_init = NULL, - .tuner_sleep = NULL, - .tuner_set_mode = NULL, - .tuner_set_frequency = NULL, - .tuner_get_frequency = NULL, - .tuner_set_bandwidth = NULL, - .tuner_get_bandwidth = NULL, - .tuner_set_bbgain = NULL, - .tuner_get_bbgain = NULL, - .tuner_set_refclk = NULL, - .tuner_get_status = NULL, -}; - -static struct stv6110x_config tt1600_stv6110x_config = { - .addr = 0x60, - .refclk = 27000000, - .clk_div = 2, -}; - -static struct isl6423_config tt1600_isl6423_config = { - .current_max = SEC_CURRENT_515m, - .curlim = SEC_CURRENT_LIM_ON, - .mod_extern = 1, - .addr = 0x08, -}; - -static void frontend_init(struct budget *budget) -{ - (void)alps_bsbe1_config; /* avoid warning */ - - switch(budget->dev->pci->subsystem_device) { - case 0x1003: // Hauppauge/TT Nova budget (stv0299/ALPS BSRU6(tsa5059) OR ves1893/ALPS BSRV2(sp5659)) - case 0x1013: - // try the ALPS BSRV2 first of all - budget->dvb_frontend = dvb_attach(ves1x93_attach, &alps_bsrv2_config, &budget->i2c_adap); - if (budget->dvb_frontend) { - budget->dvb_frontend->ops.tuner_ops.set_params = alps_bsrv2_tuner_set_params; - budget->dvb_frontend->ops.diseqc_send_master_cmd = budget_diseqc_send_master_cmd; - budget->dvb_frontend->ops.diseqc_send_burst = budget_diseqc_send_burst; - budget->dvb_frontend->ops.set_tone = budget_set_tone; - break; - } - - // try the ALPS BSRU6 now - budget->dvb_frontend = dvb_attach(stv0299_attach, &alps_bsru6_config, &budget->i2c_adap); - if (budget->dvb_frontend) { - budget->dvb_frontend->ops.tuner_ops.set_params = alps_bsru6_tuner_set_params; - budget->dvb_frontend->tuner_priv = &budget->i2c_adap; - if (budget->dev->pci->subsystem_device == 0x1003 && diseqc_method == 0) { - budget->dvb_frontend->ops.diseqc_send_master_cmd = budget_diseqc_send_master_cmd; - budget->dvb_frontend->ops.diseqc_send_burst = budget_diseqc_send_burst; - budget->dvb_frontend->ops.set_tone = budget_set_tone; - } - break; - } - break; - - case 0x1004: // Hauppauge/TT DVB-C budget (ves1820/ALPS TDBE2(sp5659)) - - budget->dvb_frontend = dvb_attach(ves1820_attach, &alps_tdbe2_config, &budget->i2c_adap, read_pwm(budget)); - if (budget->dvb_frontend) { - budget->dvb_frontend->ops.tuner_ops.set_params = alps_tdbe2_tuner_set_params; - break; - } - break; - - case 0x1005: // Hauppauge/TT Nova-T budget (L64781/Grundig 29504-401(tsa5060)) - - budget->dvb_frontend = dvb_attach(l64781_attach, &grundig_29504_401_config, &budget->i2c_adap); - if (budget->dvb_frontend) { - budget->dvb_frontend->ops.tuner_ops.set_params = grundig_29504_401_tuner_set_params; - budget->dvb_frontend->tuner_priv = NULL; - break; - } - break; - - case 0x4f52: /* Cards based on Philips Semi Sylt PCI ref. design */ - budget->dvb_frontend = dvb_attach(stv0299_attach, &alps_bsru6_config, &budget->i2c_adap); - if (budget->dvb_frontend) { - printk(KERN_INFO "budget: tuner ALPS BSRU6 in Philips Semi. Sylt detected\n"); - budget->dvb_frontend->ops.tuner_ops.set_params = alps_bsru6_tuner_set_params; - budget->dvb_frontend->tuner_priv = &budget->i2c_adap; - break; - } - break; - - case 0x4f60: /* Fujitsu Siemens Activy Budget-S PCI rev AL (stv0299/tsa5059) */ - { - int subtype = i2c_readreg(&budget->i2c_adap, 0x50, 0x67); - - if (subtype < 0) - break; - /* fixme: find a better way to identify the card */ - if (subtype < 0x36) { - /* assume ALPS BSRU6 */ - budget->dvb_frontend = dvb_attach(stv0299_attach, &alps_bsru6_config_activy, &budget->i2c_adap); - if (budget->dvb_frontend) { - printk(KERN_INFO "budget: tuner ALPS BSRU6 detected\n"); - budget->dvb_frontend->ops.tuner_ops.set_params = alps_bsru6_tuner_set_params; - budget->dvb_frontend->tuner_priv = &budget->i2c_adap; - budget->dvb_frontend->ops.set_voltage = siemens_budget_set_voltage; - budget->dvb_frontend->ops.dishnetwork_send_legacy_command = NULL; - break; - } - } else { - /* assume ALPS BSBE1 */ - /* reset tuner */ - saa7146_setgpio(budget->dev, 3, SAA7146_GPIO_OUTLO); - msleep(50); - saa7146_setgpio(budget->dev, 3, SAA7146_GPIO_OUTHI); - msleep(250); - budget->dvb_frontend = dvb_attach(stv0299_attach, &alps_bsbe1_config_activy, &budget->i2c_adap); - if (budget->dvb_frontend) { - printk(KERN_INFO "budget: tuner ALPS BSBE1 detected\n"); - budget->dvb_frontend->ops.tuner_ops.set_params = alps_bsbe1_tuner_set_params; - budget->dvb_frontend->tuner_priv = &budget->i2c_adap; - budget->dvb_frontend->ops.set_voltage = siemens_budget_set_voltage; - budget->dvb_frontend->ops.dishnetwork_send_legacy_command = NULL; - break; - } - } - break; - } - - case 0x4f61: // Fujitsu Siemens Activy Budget-S PCI rev GR (tda8083/Grundig 29504-451(tsa5522)) - budget->dvb_frontend = dvb_attach(tda8083_attach, &grundig_29504_451_config, &budget->i2c_adap); - if (budget->dvb_frontend) { - budget->dvb_frontend->ops.tuner_ops.set_params = grundig_29504_451_tuner_set_params; - budget->dvb_frontend->ops.set_voltage = siemens_budget_set_voltage; - budget->dvb_frontend->ops.dishnetwork_send_legacy_command = NULL; - } - break; - - case 0x5f60: /* Fujitsu Siemens Activy Budget-T PCI rev AL (tda10046/ALPS TDHD1-204A) */ - budget->dvb_frontend = dvb_attach(tda10046_attach, &alps_tdhd1_204a_config, &budget->i2c_adap); - if (budget->dvb_frontend) { - budget->dvb_frontend->ops.tuner_ops.set_params = alps_tdhd1_204a_tuner_set_params; - budget->dvb_frontend->tuner_priv = &budget->i2c_adap; - } - break; - - case 0x5f61: /* Fujitsu Siemens Activy Budget-T PCI rev GR (L64781/Grundig 29504-401(tsa5060)) */ - budget->dvb_frontend = dvb_attach(l64781_attach, &grundig_29504_401_config_activy, &budget->i2c_adap); - if (budget->dvb_frontend) { - budget->dvb_frontend->tuner_priv = &tuner_address_grundig_29504_401_activy; - budget->dvb_frontend->ops.tuner_ops.set_params = grundig_29504_401_tuner_set_params; - } - break; - - case 0x1016: // Hauppauge/TT Nova-S SE (samsung s5h1420/????(tda8260)) - { - struct dvb_frontend *fe; - - fe = dvb_attach(s5h1420_attach, &s5h1420_config, &budget->i2c_adap); - if (fe) { - fe->ops.tuner_ops.set_params = s5h1420_tuner_set_params; - budget->dvb_frontend = fe; - if (dvb_attach(lnbp21_attach, fe, &budget->i2c_adap, - 0, 0) == NULL) { - printk("%s: No LNBP21 found!\n", __func__); - goto error_out; - } - break; - } - } - fallthrough; - case 0x1018: // TT Budget-S-1401 (philips tda10086/philips tda8262) - { - struct dvb_frontend *fe; - - // gpio2 is connected to CLB - reset it + leave it high - saa7146_setgpio(budget->dev, 2, SAA7146_GPIO_OUTLO); - msleep(1); - saa7146_setgpio(budget->dev, 2, SAA7146_GPIO_OUTHI); - msleep(1); - - fe = dvb_attach(tda10086_attach, &tda10086_config, &budget->i2c_adap); - if (fe) { - budget->dvb_frontend = fe; - if (dvb_attach(tda826x_attach, fe, 0x60, - &budget->i2c_adap, 0) == NULL) - printk("%s: No tda826x found!\n", __func__); - if (dvb_attach(lnbp21_attach, fe, - &budget->i2c_adap, 0, 0) == NULL) { - printk("%s: No LNBP21 found!\n", __func__); - goto error_out; - } - break; - } - } - fallthrough; - - case 0x101c: { /* TT S2-1600 */ - const struct stv6110x_devctl *ctl; - saa7146_setgpio(budget->dev, 2, SAA7146_GPIO_OUTLO); - msleep(50); - saa7146_setgpio(budget->dev, 2, SAA7146_GPIO_OUTHI); - msleep(250); - - budget->dvb_frontend = dvb_attach(stv090x_attach, - &tt1600_stv090x_config, - &budget->i2c_adap, - STV090x_DEMODULATOR_0); - - if (budget->dvb_frontend) { - - ctl = dvb_attach(stv6110x_attach, - budget->dvb_frontend, - &tt1600_stv6110x_config, - &budget->i2c_adap); - - if (ctl) { - tt1600_stv090x_config.tuner_init = ctl->tuner_init; - tt1600_stv090x_config.tuner_sleep = ctl->tuner_sleep; - tt1600_stv090x_config.tuner_set_mode = ctl->tuner_set_mode; - tt1600_stv090x_config.tuner_set_frequency = ctl->tuner_set_frequency; - tt1600_stv090x_config.tuner_get_frequency = ctl->tuner_get_frequency; - tt1600_stv090x_config.tuner_set_bandwidth = ctl->tuner_set_bandwidth; - tt1600_stv090x_config.tuner_get_bandwidth = ctl->tuner_get_bandwidth; - tt1600_stv090x_config.tuner_set_bbgain = ctl->tuner_set_bbgain; - tt1600_stv090x_config.tuner_get_bbgain = ctl->tuner_get_bbgain; - tt1600_stv090x_config.tuner_set_refclk = ctl->tuner_set_refclk; - tt1600_stv090x_config.tuner_get_status = ctl->tuner_get_status; - - /* call the init function once to initialize - tuner's clock output divider and demod's - master clock */ - if (budget->dvb_frontend->ops.init) - budget->dvb_frontend->ops.init(budget->dvb_frontend); - - if (dvb_attach(isl6423_attach, - budget->dvb_frontend, - &budget->i2c_adap, - &tt1600_isl6423_config) == NULL) { - printk(KERN_ERR "%s: No Intersil ISL6423 found!\n", __func__); - goto error_out; - } - } else { - printk(KERN_ERR "%s: No STV6110(A) Silicon Tuner found!\n", __func__); - goto error_out; - } - } - } - break; - - case 0x1020: { /* Omicom S2 */ - const struct stv6110x_devctl *ctl; - saa7146_setgpio(budget->dev, 2, SAA7146_GPIO_OUTLO); - msleep(50); - saa7146_setgpio(budget->dev, 2, SAA7146_GPIO_OUTHI); - msleep(250); - - budget->dvb_frontend = dvb_attach(stv090x_attach, - &tt1600_stv090x_config, - &budget->i2c_adap, - STV090x_DEMODULATOR_0); - - if (budget->dvb_frontend) { - printk(KERN_INFO "budget: Omicom S2 detected\n"); - - ctl = dvb_attach(stv6110x_attach, - budget->dvb_frontend, - &tt1600_stv6110x_config, - &budget->i2c_adap); - - if (ctl) { - tt1600_stv090x_config.tuner_init = ctl->tuner_init; - tt1600_stv090x_config.tuner_sleep = ctl->tuner_sleep; - tt1600_stv090x_config.tuner_set_mode = ctl->tuner_set_mode; - tt1600_stv090x_config.tuner_set_frequency = ctl->tuner_set_frequency; - tt1600_stv090x_config.tuner_get_frequency = ctl->tuner_get_frequency; - tt1600_stv090x_config.tuner_set_bandwidth = ctl->tuner_set_bandwidth; - tt1600_stv090x_config.tuner_get_bandwidth = ctl->tuner_get_bandwidth; - tt1600_stv090x_config.tuner_set_bbgain = ctl->tuner_set_bbgain; - tt1600_stv090x_config.tuner_get_bbgain = ctl->tuner_get_bbgain; - tt1600_stv090x_config.tuner_set_refclk = ctl->tuner_set_refclk; - tt1600_stv090x_config.tuner_get_status = ctl->tuner_get_status; - - /* call the init function once to initialize - tuner's clock output divider and demod's - master clock */ - if (budget->dvb_frontend->ops.init) - budget->dvb_frontend->ops.init(budget->dvb_frontend); - - if (dvb_attach(lnbh24_attach, - budget->dvb_frontend, - &budget->i2c_adap, - LNBH24_PCL | LNBH24_TTX, - LNBH24_TEN, 0x14>>1) == NULL) { - printk(KERN_ERR - "No LNBH24 found!\n"); - goto error_out; - } - } else { - printk(KERN_ERR "%s: No STV6110(A) Silicon Tuner found!\n", __func__); - goto error_out; - } - } - } - break; - } - - if (budget->dvb_frontend == NULL) { - printk("budget: A frontend driver was not found for device [%04x:%04x] subsystem [%04x:%04x]\n", - budget->dev->pci->vendor, - budget->dev->pci->device, - budget->dev->pci->subsystem_vendor, - budget->dev->pci->subsystem_device); - } else { - if (dvb_register_frontend(&budget->dvb_adapter, budget->dvb_frontend)) - goto error_out; - } - return; - -error_out: - printk("budget: Frontend registration failed!\n"); - dvb_frontend_detach(budget->dvb_frontend); - budget->dvb_frontend = NULL; - return; -} - -static int budget_attach (struct saa7146_dev* dev, struct saa7146_pci_extension_data *info) -{ - struct budget *budget = NULL; - int err; - - budget = kmalloc(sizeof(struct budget), GFP_KERNEL); - if( NULL == budget ) { - return -ENOMEM; - } - - dprintk(2, "dev:%p, info:%p, budget:%p\n", dev, info, budget); - - dev->ext_priv = budget; - - err = ttpci_budget_init(budget, dev, info, THIS_MODULE, adapter_nr); - if (err) { - printk("==> failed\n"); - kfree (budget); - return err; - } - - budget->dvb_adapter.priv = budget; - frontend_init(budget); - - ttpci_budget_init_hooks(budget); - - return 0; -} - -static int budget_detach (struct saa7146_dev* dev) -{ - struct budget *budget = (struct budget*) dev->ext_priv; - int err; - - if (budget->dvb_frontend) { - dvb_unregister_frontend(budget->dvb_frontend); - dvb_frontend_detach(budget->dvb_frontend); - } - - err = ttpci_budget_deinit (budget); - - kfree (budget); - dev->ext_priv = NULL; - - return err; -} - -static struct saa7146_extension budget_extension; - -MAKE_BUDGET_INFO(ttbs, "TT-Budget/WinTV-NOVA-S PCI", BUDGET_TT); -MAKE_BUDGET_INFO(ttbc, "TT-Budget/WinTV-NOVA-C PCI", BUDGET_TT); -MAKE_BUDGET_INFO(ttbt, "TT-Budget/WinTV-NOVA-T PCI", BUDGET_TT); -MAKE_BUDGET_INFO(satel, "SATELCO Multimedia PCI", BUDGET_TT_HW_DISEQC); -MAKE_BUDGET_INFO(ttbs1401, "TT-Budget-S-1401 PCI", BUDGET_TT); -MAKE_BUDGET_INFO(tt1600, "TT-Budget S2-1600 PCI", BUDGET_TT); -MAKE_BUDGET_INFO(fsacs0, "Fujitsu Siemens Activy Budget-S PCI (rev GR/grundig frontend)", BUDGET_FS_ACTIVY); -MAKE_BUDGET_INFO(fsacs1, "Fujitsu Siemens Activy Budget-S PCI (rev AL/alps frontend)", BUDGET_FS_ACTIVY); -MAKE_BUDGET_INFO(fsact, "Fujitsu Siemens Activy Budget-T PCI (rev GR/Grundig frontend)", BUDGET_FS_ACTIVY); -MAKE_BUDGET_INFO(fsact1, "Fujitsu Siemens Activy Budget-T PCI (rev AL/ALPS TDHD1-204A)", BUDGET_FS_ACTIVY); -MAKE_BUDGET_INFO(omicom, "Omicom S2 PCI", BUDGET_TT); -MAKE_BUDGET_INFO(sylt, "Philips Semi Sylt PCI", BUDGET_TT_HW_DISEQC); - -static const struct pci_device_id pci_tbl[] = { - MAKE_EXTENSION_PCI(ttbs, 0x13c2, 0x1003), - MAKE_EXTENSION_PCI(ttbc, 0x13c2, 0x1004), - MAKE_EXTENSION_PCI(ttbt, 0x13c2, 0x1005), - MAKE_EXTENSION_PCI(satel, 0x13c2, 0x1013), - MAKE_EXTENSION_PCI(ttbs, 0x13c2, 0x1016), - MAKE_EXTENSION_PCI(ttbs1401, 0x13c2, 0x1018), - MAKE_EXTENSION_PCI(tt1600, 0x13c2, 0x101c), - MAKE_EXTENSION_PCI(fsacs1,0x1131, 0x4f60), - MAKE_EXTENSION_PCI(fsacs0,0x1131, 0x4f61), - MAKE_EXTENSION_PCI(fsact1, 0x1131, 0x5f60), - MAKE_EXTENSION_PCI(fsact, 0x1131, 0x5f61), - MAKE_EXTENSION_PCI(omicom, 0x14c4, 0x1020), - MAKE_EXTENSION_PCI(sylt, 0x1131, 0x4f52), - { - .vendor = 0, - } -}; - -MODULE_DEVICE_TABLE(pci, pci_tbl); - -static struct saa7146_extension budget_extension = { - .name = "budget dvb", - .flags = SAA7146_USE_I2C_IRQ, - - .module = THIS_MODULE, - .pci_tbl = pci_tbl, - .attach = budget_attach, - .detach = budget_detach, - - .irq_mask = MASK_10, - .irq_func = ttpci_budget_irq10_handler, -}; - -static int __init budget_init(void) -{ - return saa7146_register_extension(&budget_extension); -} - -static void __exit budget_exit(void) -{ - saa7146_unregister_extension(&budget_extension); -} - -module_init(budget_init); -module_exit(budget_exit); - -MODULE_LICENSE("GPL"); -MODULE_AUTHOR("Ralph Metzler, Marcus Metzler, Michael Hunold, others"); -MODULE_DESCRIPTION("driver for the SAA7146 based so-called budget PCI DVB cards by Siemens, Technotrend, Hauppauge"); diff --git a/drivers/staging/media/deprecated/saa7146/ttpci/budget.h b/drivers/staging/media/deprecated/saa7146/ttpci/budget.h deleted file mode 100644 index 82cc0df492b3..000000000000 --- a/drivers/staging/media/deprecated/saa7146/ttpci/budget.h +++ /dev/null @@ -1,129 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ - -#ifndef __BUDGET_DVB__ -#define __BUDGET_DVB__ - -#include -#include -#include -#include -#include -#include - -#include -#include - -#include "../common/saa7146.h" - -extern int budget_debug; - -#ifdef dprintk -#undef dprintk -#endif - -#define dprintk(level, fmt, arg...) do { \ - if (level & budget_debug) \ - printk(KERN_DEBUG KBUILD_MODNAME ": %s(): " fmt, \ - __func__, ##arg); \ -} while (0) - -#define TS_SIZE 188 - -struct budget_info { - char *name; - int type; -}; - -/* place to store all the necessary device information */ -struct budget { - - /* devices */ - struct dvb_device dvb_dev; - struct dvb_net dvb_net; - - struct saa7146_dev *dev; - - struct i2c_adapter i2c_adap; - struct budget_info *card; - - unsigned char *grabbing; - struct saa7146_pgtable pt; - - struct tasklet_struct fidb_tasklet; - struct tasklet_struct vpe_tasklet; - - struct dmxdev dmxdev; - struct dvb_demux demux; - - struct dmx_frontend hw_frontend; - struct dmx_frontend mem_frontend; - - int ci_present; - int video_port; - - u32 buffer_width; - u32 buffer_height; - u32 buffer_size; - u32 buffer_warning_threshold; - u32 buffer_warnings; - unsigned long buffer_warning_time; - - u32 ttbp; - int feeding; - - spinlock_t feedlock; - - spinlock_t debilock; - - struct dvb_adapter dvb_adapter; - struct dvb_frontend *dvb_frontend; - int (*read_fe_status)(struct dvb_frontend *fe, enum fe_status *status); - int fe_synced; - - void *priv; -}; - -#define MAKE_BUDGET_INFO(x_var,x_name,x_type) \ -static struct budget_info x_var ## _info = { \ - .name=x_name, \ - .type=x_type }; \ -static struct saa7146_pci_extension_data x_var = { \ - .ext_priv = &x_var ## _info, \ - .ext = &budget_extension }; - -#define BUDGET_TT 0 -#define BUDGET_TT_HW_DISEQC 1 -#define BUDGET_PATCH 3 -#define BUDGET_FS_ACTIVY 4 -#define BUDGET_CIN1200S 5 -#define BUDGET_CIN1200C 6 -#define BUDGET_CIN1200T 7 -#define BUDGET_KNC1S 8 -#define BUDGET_KNC1C 9 -#define BUDGET_KNC1T 10 -#define BUDGET_KNC1SP 11 -#define BUDGET_KNC1CP 12 -#define BUDGET_KNC1TP 13 -#define BUDGET_TVSTAR 14 -#define BUDGET_CIN1200C_MK3 15 -#define BUDGET_KNC1C_MK3 16 -#define BUDGET_KNC1CP_MK3 17 -#define BUDGET_KNC1S2 18 -#define BUDGET_KNC1C_TDA10024 19 - -#define BUDGET_VIDEO_PORTA 0 -#define BUDGET_VIDEO_PORTB 1 - -extern int ttpci_budget_init(struct budget *budget, struct saa7146_dev *dev, - struct saa7146_pci_extension_data *info, - struct module *owner, short *adapter_nums); -extern void ttpci_budget_init_hooks(struct budget *budget); -extern int ttpci_budget_deinit(struct budget *budget); -extern void ttpci_budget_irq10_handler(struct saa7146_dev *dev, u32 * isr); -extern void ttpci_budget_set_video_port(struct saa7146_dev *dev, int video_port); -extern int ttpci_budget_debiread(struct budget *budget, u32 config, int addr, int count, - int uselocks, int nobusyloop); -extern int ttpci_budget_debiwrite(struct budget *budget, u32 config, int addr, int count, u32 value, - int uselocks, int nobusyloop); - -#endif From patchwork Wed Jan 11 10:52:55 2023 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Hans Verkuil X-Patchwork-Id: 13096410 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id 496C4C678D6 for ; Wed, 11 Jan 2023 10:54:19 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S238851AbjAKKyC (ORCPT ); Wed, 11 Jan 2023 05:54:02 -0500 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:37378 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S238514AbjAKKxW (ORCPT ); Wed, 11 Jan 2023 05:53:22 -0500 Received: from ams.source.kernel.org (ams.source.kernel.org [IPv6:2604:1380:4601:e00::1]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id A93F925E9 for ; Wed, 11 Jan 2023 02:53:15 -0800 (PST) Received: from smtp.kernel.org (relay.kernel.org [52.25.139.140]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by ams.source.kernel.org (Postfix) with ESMTPS id 9FAD9B81BAF for ; Wed, 11 Jan 2023 10:53:14 +0000 (UTC) Received: by smtp.kernel.org (Postfix) with ESMTPSA id 877B5C433EF; Wed, 11 Jan 2023 10:53:12 +0000 (UTC) From: Hans Verkuil To: linux-media@vger.kernel.org Cc: Lad Prabhakar , Hans Verkuil Subject: [PATCH 10/13] saa7146: remove deprecated drivers Date: Wed, 11 Jan 2023 11:52:55 +0100 Message-Id: <20230111105258.547471-11-hverkuil-cisco@xs4all.nl> X-Mailer: git-send-email 2.39.0 In-Reply-To: <20230111105258.547471-1-hverkuil-cisco@xs4all.nl> References: <20230111105258.547471-1-hverkuil-cisco@xs4all.nl> MIME-Version: 1.0 Precedence: bulk List-ID: X-Mailing-List: linux-media@vger.kernel.org The saa7146-based hexium_gemini/orion and mxb drivers do not use the vb2 framework for streaming video, instead they use the old vb1 framework and nobody stepped in to convert these drivers to vb2. The hardware is very old, so the decision was made to remove them altogether since we want to get rid of the old vb1 framework. Signed-off-by: Hans Verkuil --- .../admin-guide/media/pci-cardlist.rst | 3 - MAINTAINERS | 7 - drivers/staging/media/Kconfig | 1 - drivers/staging/media/Makefile | 1 - .../staging/media/deprecated/saa7146/Kconfig | 3 - .../staging/media/deprecated/saa7146/Makefile | 2 - .../media/deprecated/saa7146/common/Kconfig | 10 - .../media/deprecated/saa7146/common/Makefile | 6 - .../media/deprecated/saa7146/common/saa7146.h | 472 ------ .../deprecated/saa7146/common/saa7146_core.c | 578 -------- .../deprecated/saa7146/common/saa7146_fops.c | 658 --------- .../deprecated/saa7146/common/saa7146_hlp.c | 1046 -------------- .../deprecated/saa7146/common/saa7146_i2c.c | 421 ------ .../deprecated/saa7146/common/saa7146_vbi.c | 498 ------- .../deprecated/saa7146/common/saa7146_video.c | 1286 ----------------- .../deprecated/saa7146/common/saa7146_vv.h | 266 ---- .../media/deprecated/saa7146/saa7146/Kconfig | 48 - .../media/deprecated/saa7146/saa7146/Makefile | 6 - .../media/deprecated/saa7146/saa7146/TODO | 7 - .../saa7146/saa7146/hexium_gemini.c | 425 ------ .../deprecated/saa7146/saa7146/hexium_orion.c | 496 ------- .../media/deprecated/saa7146/saa7146/mxb.c | 873 ----------- 22 files changed, 7113 deletions(-) delete mode 100644 drivers/staging/media/deprecated/saa7146/Kconfig delete mode 100644 drivers/staging/media/deprecated/saa7146/Makefile delete mode 100644 drivers/staging/media/deprecated/saa7146/common/Kconfig delete mode 100644 drivers/staging/media/deprecated/saa7146/common/Makefile delete mode 100644 drivers/staging/media/deprecated/saa7146/common/saa7146.h delete mode 100644 drivers/staging/media/deprecated/saa7146/common/saa7146_core.c delete mode 100644 drivers/staging/media/deprecated/saa7146/common/saa7146_fops.c delete mode 100644 drivers/staging/media/deprecated/saa7146/common/saa7146_hlp.c delete mode 100644 drivers/staging/media/deprecated/saa7146/common/saa7146_i2c.c delete mode 100644 drivers/staging/media/deprecated/saa7146/common/saa7146_vbi.c delete mode 100644 drivers/staging/media/deprecated/saa7146/common/saa7146_video.c delete mode 100644 drivers/staging/media/deprecated/saa7146/common/saa7146_vv.h delete mode 100644 drivers/staging/media/deprecated/saa7146/saa7146/Kconfig delete mode 100644 drivers/staging/media/deprecated/saa7146/saa7146/Makefile delete mode 100644 drivers/staging/media/deprecated/saa7146/saa7146/TODO delete mode 100644 drivers/staging/media/deprecated/saa7146/saa7146/hexium_gemini.c delete mode 100644 drivers/staging/media/deprecated/saa7146/saa7146/hexium_orion.c delete mode 100644 drivers/staging/media/deprecated/saa7146/saa7146/mxb.c diff --git a/Documentation/admin-guide/media/pci-cardlist.rst b/Documentation/admin-guide/media/pci-cardlist.rst index aca13c7e8508..f0c90f42b713 100644 --- a/Documentation/admin-guide/media/pci-cardlist.rst +++ b/Documentation/admin-guide/media/pci-cardlist.rst @@ -69,14 +69,11 @@ dm1105 SDMC DM1105 based PCI cards dt3155 DT3155 frame grabber earth-pt1 PT1 cards earth-pt3 Earthsoft PT3 cards -hexium_gemini Hexium Gemini frame grabber -hexium_orion Hexium HV-PCI6 and Orion frame grabber hopper HOPPER based cards ipu3-cio2 Intel ipu3-cio2 driver ivtv Conexant cx23416/cx23415 MPEG encoder/decoder ivtvfb Conexant cx23415 framebuffer mantis MANTIS based cards -mxb Siemens-Nixdorf 'Multimedia eXtension Board' netup-unidvb NetUP Universal DVB card ngene Micronas nGene pluto2 Pluto2 cards diff --git a/MAINTAINERS b/MAINTAINERS index ba5254cd1002..485228b44f80 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -18377,13 +18377,6 @@ T: git git://linuxtv.org/media_tree.git F: Documentation/driver-api/media/drivers/saa7134* F: drivers/media/pci/saa7134/ -SAA7146 VIDEO4LINUX-2 DRIVER -M: Hans Verkuil -L: linux-media@vger.kernel.org -S: Maintained -T: git git://linuxtv.org/media_tree.git -F: drivers/staging/media/deprecated/saa7146/ - SAFESETID SECURITY MODULE M: Micah Morton S: Supported diff --git a/drivers/staging/media/Kconfig b/drivers/staging/media/Kconfig index d71ee9a5d04b..2f2dbec4078d 100644 --- a/drivers/staging/media/Kconfig +++ b/drivers/staging/media/Kconfig @@ -52,7 +52,6 @@ menuconfig STAGING_MEDIA_DEPRECATED if STAGING_MEDIA_DEPRECATED source "drivers/staging/media/deprecated/atmel/Kconfig" -source "drivers/staging/media/deprecated/saa7146/Kconfig" endif endif diff --git a/drivers/staging/media/Makefile b/drivers/staging/media/Makefile index 1a01c1af3224..4ab1938bc26f 100644 --- a/drivers/staging/media/Makefile +++ b/drivers/staging/media/Makefile @@ -9,4 +9,3 @@ obj-$(CONFIG_VIDEO_ROCKCHIP_VDEC) += rkvdec/ obj-$(CONFIG_VIDEO_SUNXI) += sunxi/ obj-$(CONFIG_VIDEO_TEGRA) += tegra-video/ obj-$(CONFIG_VIDEO_IPU3_IMGU) += ipu3/ -obj-y += deprecated/saa7146/ diff --git a/drivers/staging/media/deprecated/saa7146/Kconfig b/drivers/staging/media/deprecated/saa7146/Kconfig deleted file mode 100644 index 3d2e2120788e..000000000000 --- a/drivers/staging/media/deprecated/saa7146/Kconfig +++ /dev/null @@ -1,3 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0 -source "drivers/staging/media/deprecated/saa7146/common/Kconfig" -source "drivers/staging/media/deprecated/saa7146/saa7146/Kconfig" diff --git a/drivers/staging/media/deprecated/saa7146/Makefile b/drivers/staging/media/deprecated/saa7146/Makefile deleted file mode 100644 index 71866795174e..000000000000 --- a/drivers/staging/media/deprecated/saa7146/Makefile +++ /dev/null @@ -1,2 +0,0 @@ - # SPDX-License-Identifier: GPL-2.0-only -obj-y += common/ saa7146/ diff --git a/drivers/staging/media/deprecated/saa7146/common/Kconfig b/drivers/staging/media/deprecated/saa7146/common/Kconfig deleted file mode 100644 index a0aa155e5d85..000000000000 --- a/drivers/staging/media/deprecated/saa7146/common/Kconfig +++ /dev/null @@ -1,10 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0-only -config VIDEO_SAA7146 - tristate - depends on I2C && PCI - -config VIDEO_SAA7146_VV - tristate - depends on VIDEO_DEV - select VIDEOBUF_DMA_SG - select VIDEO_SAA7146 diff --git a/drivers/staging/media/deprecated/saa7146/common/Makefile b/drivers/staging/media/deprecated/saa7146/common/Makefile deleted file mode 100644 index 2a6337feaec8..000000000000 --- a/drivers/staging/media/deprecated/saa7146/common/Makefile +++ /dev/null @@ -1,6 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0-only -saa7146-objs := saa7146_i2c.o saa7146_core.o -saa7146_vv-objs := saa7146_fops.o saa7146_video.o saa7146_hlp.o saa7146_vbi.o - -obj-$(CONFIG_VIDEO_SAA7146) += saa7146.o -obj-$(CONFIG_VIDEO_SAA7146_VV) += saa7146_vv.o diff --git a/drivers/staging/media/deprecated/saa7146/common/saa7146.h b/drivers/staging/media/deprecated/saa7146/common/saa7146.h deleted file mode 100644 index 71ce63c99cb4..000000000000 --- a/drivers/staging/media/deprecated/saa7146/common/saa7146.h +++ /dev/null @@ -1,472 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -#ifndef __SAA7146__ -#define __SAA7146__ - -#include /* for delay-stuff */ -#include /* for kmalloc/kfree */ -#include /* for pci-config-stuff, vendor ids etc. */ -#include /* for "__init" */ -#include /* for IMMEDIATE_BH */ -#include /* for kernel module loader */ -#include /* for i2c subsystem */ -#include /* for accessing devices */ -#include -#include -#include -#include -#include - -#include /* for vmalloc() */ -#include /* for vmalloc_to_page() */ - -#define saa7146_write(sxy,adr,dat) writel((dat),(sxy->mem+(adr))) -#define saa7146_read(sxy,adr) readl(sxy->mem+(adr)) - -extern unsigned int saa7146_debug; - -#ifndef DEBUG_VARIABLE - #define DEBUG_VARIABLE saa7146_debug -#endif - -#define ERR(fmt, ...) pr_err("%s: " fmt, __func__, ##__VA_ARGS__) - -#define _DBG(mask, fmt, ...) \ -do { \ - if (DEBUG_VARIABLE & mask) \ - pr_debug("%s(): " fmt, __func__, ##__VA_ARGS__); \ -} while (0) - -/* simple debug messages */ -#define DEB_S(fmt, ...) _DBG(0x01, fmt, ##__VA_ARGS__) -/* more detailed debug messages */ -#define DEB_D(fmt, ...) _DBG(0x02, fmt, ##__VA_ARGS__) -/* print enter and exit of functions */ -#define DEB_EE(fmt, ...) _DBG(0x04, fmt, ##__VA_ARGS__) -/* i2c debug messages */ -#define DEB_I2C(fmt, ...) _DBG(0x08, fmt, ##__VA_ARGS__) -/* vbi debug messages */ -#define DEB_VBI(fmt, ...) _DBG(0x10, fmt, ##__VA_ARGS__) -/* interrupt debug messages */ -#define DEB_INT(fmt, ...) _DBG(0x20, fmt, ##__VA_ARGS__) -/* capture debug messages */ -#define DEB_CAP(fmt, ...) _DBG(0x40, fmt, ##__VA_ARGS__) - -#define SAA7146_ISR_CLEAR(x,y) \ - saa7146_write(x, ISR, (y)); - -struct module; - -struct saa7146_dev; -struct saa7146_extension; -struct saa7146_vv; - -/* saa7146 page table */ -struct saa7146_pgtable { - unsigned int size; - __le32 *cpu; - dma_addr_t dma; - /* used for offsets for u,v planes for planar capture modes */ - unsigned long offset; - /* used for custom pagetables (used for example by budget dvb cards) */ - struct scatterlist *slist; - int nents; -}; - -struct saa7146_pci_extension_data { - struct saa7146_extension *ext; - void *ext_priv; /* most likely a name string */ -}; - -#define MAKE_EXTENSION_PCI(x_var, x_vendor, x_device) \ - { \ - .vendor = PCI_VENDOR_ID_PHILIPS, \ - .device = PCI_DEVICE_ID_PHILIPS_SAA7146, \ - .subvendor = x_vendor, \ - .subdevice = x_device, \ - .driver_data = (unsigned long)& x_var, \ - } - -struct saa7146_extension -{ - char name[32]; /* name of the device */ -#define SAA7146_USE_I2C_IRQ 0x1 -#define SAA7146_I2C_SHORT_DELAY 0x2 - int flags; - - /* pairs of subvendor and subdevice ids for - supported devices, last entry 0xffff, 0xfff */ - struct module *module; - struct pci_driver driver; - const struct pci_device_id *pci_tbl; - - /* extension functions */ - int (*probe)(struct saa7146_dev *); - int (*attach)(struct saa7146_dev *, struct saa7146_pci_extension_data *); - int (*detach)(struct saa7146_dev*); - - u32 irq_mask; /* mask to indicate, which irq-events are handled by the extension */ - void (*irq_func)(struct saa7146_dev*, u32* irq_mask); -}; - -struct saa7146_dma -{ - dma_addr_t dma_handle; - __le32 *cpu_addr; -}; - -struct saa7146_dev -{ - struct module *module; - - struct v4l2_device v4l2_dev; - struct v4l2_ctrl_handler ctrl_handler; - - /* different device locks */ - spinlock_t slock; - struct mutex v4l2_lock; - - unsigned char __iomem *mem; /* pointer to mapped IO memory */ - u32 revision; /* chip revision; needed for bug-workarounds*/ - - /* pci-device & irq stuff*/ - char name[32]; - struct pci_dev *pci; - u32 int_todo; - spinlock_t int_slock; - - /* extension handling */ - struct saa7146_extension *ext; /* indicates if handled by extension */ - void *ext_priv; /* pointer for extension private use (most likely some private data) */ - struct saa7146_ext_vv *ext_vv_data; - - /* per device video/vbi information (if available) */ - struct saa7146_vv *vv_data; - void (*vv_callback)(struct saa7146_dev *dev, unsigned long status); - - /* i2c-stuff */ - struct mutex i2c_lock; - - u32 i2c_bitrate; - struct saa7146_dma d_i2c; /* pointer to i2c memory */ - wait_queue_head_t i2c_wq; - int i2c_op; - - /* memories */ - struct saa7146_dma d_rps0; - struct saa7146_dma d_rps1; -}; - -static inline struct saa7146_dev *to_saa7146_dev(struct v4l2_device *v4l2_dev) -{ - return container_of(v4l2_dev, struct saa7146_dev, v4l2_dev); -} - -/* from saa7146_i2c.c */ -int saa7146_i2c_adapter_prepare(struct saa7146_dev *dev, struct i2c_adapter *i2c_adapter, u32 bitrate); - -/* from saa7146_core.c */ -int saa7146_register_extension(struct saa7146_extension*); -int saa7146_unregister_extension(struct saa7146_extension*); -struct saa7146_format* saa7146_format_by_fourcc(struct saa7146_dev *dev, int fourcc); -int saa7146_pgtable_alloc(struct pci_dev *pci, struct saa7146_pgtable *pt); -void saa7146_pgtable_free(struct pci_dev *pci, struct saa7146_pgtable *pt); -int saa7146_pgtable_build_single(struct pci_dev *pci, struct saa7146_pgtable *pt, struct scatterlist *list, int length ); -void *saa7146_vmalloc_build_pgtable(struct pci_dev *pci, long length, struct saa7146_pgtable *pt); -void saa7146_vfree_destroy_pgtable(struct pci_dev *pci, void *mem, struct saa7146_pgtable *pt); -void saa7146_setgpio(struct saa7146_dev *dev, int port, u32 data); -int saa7146_wait_for_debi_done(struct saa7146_dev *dev, int nobusyloop); - -/* some memory sizes */ -#define SAA7146_I2C_MEM ( 1*PAGE_SIZE) -#define SAA7146_RPS_MEM ( 1*PAGE_SIZE) - -/* some i2c constants */ -#define SAA7146_I2C_TIMEOUT 100 /* i2c-timeout-value in ms */ -#define SAA7146_I2C_RETRIES 3 /* how many times shall we retry an i2c-operation? */ -#define SAA7146_I2C_DELAY 5 /* time we wait after certain i2c-operations */ - -/* unsorted defines */ -#define ME1 0x0000000800 -#define PV1 0x0000000008 - -/* gpio defines */ -#define SAA7146_GPIO_INPUT 0x00 -#define SAA7146_GPIO_IRQHI 0x10 -#define SAA7146_GPIO_IRQLO 0x20 -#define SAA7146_GPIO_IRQHL 0x30 -#define SAA7146_GPIO_OUTLO 0x40 -#define SAA7146_GPIO_OUTHI 0x50 - -/* debi defines */ -#define DEBINOSWAP 0x000e0000 - -/* define for the register programming sequencer (rps) */ -#define CMD_NOP 0x00000000 /* No operation */ -#define CMD_CLR_EVENT 0x00000000 /* Clear event */ -#define CMD_SET_EVENT 0x10000000 /* Set signal event */ -#define CMD_PAUSE 0x20000000 /* Pause */ -#define CMD_CHECK_LATE 0x30000000 /* Check late */ -#define CMD_UPLOAD 0x40000000 /* Upload */ -#define CMD_STOP 0x50000000 /* Stop */ -#define CMD_INTERRUPT 0x60000000 /* Interrupt */ -#define CMD_JUMP 0x80000000 /* Jump */ -#define CMD_WR_REG 0x90000000 /* Write (load) register */ -#define CMD_RD_REG 0xa0000000 /* Read (store) register */ -#define CMD_WR_REG_MASK 0xc0000000 /* Write register with mask */ - -#define CMD_OAN MASK_27 -#define CMD_INV MASK_26 -#define CMD_SIG4 MASK_25 -#define CMD_SIG3 MASK_24 -#define CMD_SIG2 MASK_23 -#define CMD_SIG1 MASK_22 -#define CMD_SIG0 MASK_21 -#define CMD_O_FID_B MASK_14 -#define CMD_E_FID_B MASK_13 -#define CMD_O_FID_A MASK_12 -#define CMD_E_FID_A MASK_11 - -/* some events and command modifiers for rps1 squarewave generator */ -#define EVT_HS (1<<15) // Source Line Threshold reached -#define EVT_VBI_B (1<<9) // VSYNC Event -#define RPS_OAN (1<<27) // 1: OR events, 0: AND events -#define RPS_INV (1<<26) // Invert (compound) event -#define GPIO3_MSK 0xFF000000 // GPIO #3 control bits - -/* Bit mask constants */ -#define MASK_00 0x00000001 /* Mask value for bit 0 */ -#define MASK_01 0x00000002 /* Mask value for bit 1 */ -#define MASK_02 0x00000004 /* Mask value for bit 2 */ -#define MASK_03 0x00000008 /* Mask value for bit 3 */ -#define MASK_04 0x00000010 /* Mask value for bit 4 */ -#define MASK_05 0x00000020 /* Mask value for bit 5 */ -#define MASK_06 0x00000040 /* Mask value for bit 6 */ -#define MASK_07 0x00000080 /* Mask value for bit 7 */ -#define MASK_08 0x00000100 /* Mask value for bit 8 */ -#define MASK_09 0x00000200 /* Mask value for bit 9 */ -#define MASK_10 0x00000400 /* Mask value for bit 10 */ -#define MASK_11 0x00000800 /* Mask value for bit 11 */ -#define MASK_12 0x00001000 /* Mask value for bit 12 */ -#define MASK_13 0x00002000 /* Mask value for bit 13 */ -#define MASK_14 0x00004000 /* Mask value for bit 14 */ -#define MASK_15 0x00008000 /* Mask value for bit 15 */ -#define MASK_16 0x00010000 /* Mask value for bit 16 */ -#define MASK_17 0x00020000 /* Mask value for bit 17 */ -#define MASK_18 0x00040000 /* Mask value for bit 18 */ -#define MASK_19 0x00080000 /* Mask value for bit 19 */ -#define MASK_20 0x00100000 /* Mask value for bit 20 */ -#define MASK_21 0x00200000 /* Mask value for bit 21 */ -#define MASK_22 0x00400000 /* Mask value for bit 22 */ -#define MASK_23 0x00800000 /* Mask value for bit 23 */ -#define MASK_24 0x01000000 /* Mask value for bit 24 */ -#define MASK_25 0x02000000 /* Mask value for bit 25 */ -#define MASK_26 0x04000000 /* Mask value for bit 26 */ -#define MASK_27 0x08000000 /* Mask value for bit 27 */ -#define MASK_28 0x10000000 /* Mask value for bit 28 */ -#define MASK_29 0x20000000 /* Mask value for bit 29 */ -#define MASK_30 0x40000000 /* Mask value for bit 30 */ -#define MASK_31 0x80000000 /* Mask value for bit 31 */ - -#define MASK_B0 0x000000ff /* Mask value for byte 0 */ -#define MASK_B1 0x0000ff00 /* Mask value for byte 1 */ -#define MASK_B2 0x00ff0000 /* Mask value for byte 2 */ -#define MASK_B3 0xff000000 /* Mask value for byte 3 */ - -#define MASK_W0 0x0000ffff /* Mask value for word 0 */ -#define MASK_W1 0xffff0000 /* Mask value for word 1 */ - -#define MASK_PA 0xfffffffc /* Mask value for physical address */ -#define MASK_PR 0xfffffffe /* Mask value for protection register */ -#define MASK_ER 0xffffffff /* Mask value for the entire register */ - -#define MASK_NONE 0x00000000 /* No mask */ - -/* register aliases */ -#define BASE_ODD1 0x00 /* Video DMA 1 registers */ -#define BASE_EVEN1 0x04 -#define PROT_ADDR1 0x08 -#define PITCH1 0x0C -#define BASE_PAGE1 0x10 /* Video DMA 1 base page */ -#define NUM_LINE_BYTE1 0x14 - -#define BASE_ODD2 0x18 /* Video DMA 2 registers */ -#define BASE_EVEN2 0x1C -#define PROT_ADDR2 0x20 -#define PITCH2 0x24 -#define BASE_PAGE2 0x28 /* Video DMA 2 base page */ -#define NUM_LINE_BYTE2 0x2C - -#define BASE_ODD3 0x30 /* Video DMA 3 registers */ -#define BASE_EVEN3 0x34 -#define PROT_ADDR3 0x38 -#define PITCH3 0x3C -#define BASE_PAGE3 0x40 /* Video DMA 3 base page */ -#define NUM_LINE_BYTE3 0x44 - -#define PCI_BT_V1 0x48 /* Video/FIFO 1 */ -#define PCI_BT_V2 0x49 /* Video/FIFO 2 */ -#define PCI_BT_V3 0x4A /* Video/FIFO 3 */ -#define PCI_BT_DEBI 0x4B /* DEBI */ -#define PCI_BT_A 0x4C /* Audio */ - -#define DD1_INIT 0x50 /* Init setting of DD1 interface */ - -#define DD1_STREAM_B 0x54 /* DD1 B video data stream handling */ -#define DD1_STREAM_A 0x56 /* DD1 A video data stream handling */ - -#define BRS_CTRL 0x58 /* BRS control register */ -#define HPS_CTRL 0x5C /* HPS control register */ -#define HPS_V_SCALE 0x60 /* HPS vertical scale */ -#define HPS_V_GAIN 0x64 /* HPS vertical ACL and gain */ -#define HPS_H_PRESCALE 0x68 /* HPS horizontal prescale */ -#define HPS_H_SCALE 0x6C /* HPS horizontal scale */ -#define BCS_CTRL 0x70 /* BCS control */ -#define CHROMA_KEY_RANGE 0x74 -#define CLIP_FORMAT_CTRL 0x78 /* HPS outputs formats & clipping */ - -#define DEBI_CONFIG 0x7C -#define DEBI_COMMAND 0x80 -#define DEBI_PAGE 0x84 -#define DEBI_AD 0x88 - -#define I2C_TRANSFER 0x8C -#define I2C_STATUS 0x90 - -#define BASE_A1_IN 0x94 /* Audio 1 input DMA */ -#define PROT_A1_IN 0x98 -#define PAGE_A1_IN 0x9C - -#define BASE_A1_OUT 0xA0 /* Audio 1 output DMA */ -#define PROT_A1_OUT 0xA4 -#define PAGE_A1_OUT 0xA8 - -#define BASE_A2_IN 0xAC /* Audio 2 input DMA */ -#define PROT_A2_IN 0xB0 -#define PAGE_A2_IN 0xB4 - -#define BASE_A2_OUT 0xB8 /* Audio 2 output DMA */ -#define PROT_A2_OUT 0xBC -#define PAGE_A2_OUT 0xC0 - -#define RPS_PAGE0 0xC4 /* RPS task 0 page register */ -#define RPS_PAGE1 0xC8 /* RPS task 1 page register */ - -#define RPS_THRESH0 0xCC /* HBI threshold for task 0 */ -#define RPS_THRESH1 0xD0 /* HBI threshold for task 1 */ - -#define RPS_TOV0 0xD4 /* RPS timeout for task 0 */ -#define RPS_TOV1 0xD8 /* RPS timeout for task 1 */ - -#define IER 0xDC /* Interrupt enable register */ - -#define GPIO_CTRL 0xE0 /* GPIO 0-3 register */ - -#define EC1SSR 0xE4 /* Event cnt set 1 source select */ -#define EC2SSR 0xE8 /* Event cnt set 2 source select */ -#define ECT1R 0xEC /* Event cnt set 1 thresholds */ -#define ECT2R 0xF0 /* Event cnt set 2 thresholds */ - -#define ACON1 0xF4 -#define ACON2 0xF8 - -#define MC1 0xFC /* Main control register 1 */ -#define MC2 0x100 /* Main control register 2 */ - -#define RPS_ADDR0 0x104 /* RPS task 0 address register */ -#define RPS_ADDR1 0x108 /* RPS task 1 address register */ - -#define ISR 0x10C /* Interrupt status register */ -#define PSR 0x110 /* Primary status register */ -#define SSR 0x114 /* Secondary status register */ - -#define EC1R 0x118 /* Event counter set 1 register */ -#define EC2R 0x11C /* Event counter set 2 register */ - -#define PCI_VDP1 0x120 /* Video DMA pointer of FIFO 1 */ -#define PCI_VDP2 0x124 /* Video DMA pointer of FIFO 2 */ -#define PCI_VDP3 0x128 /* Video DMA pointer of FIFO 3 */ -#define PCI_ADP1 0x12C /* Audio DMA pointer of audio out 1 */ -#define PCI_ADP2 0x130 /* Audio DMA pointer of audio in 1 */ -#define PCI_ADP3 0x134 /* Audio DMA pointer of audio out 2 */ -#define PCI_ADP4 0x138 /* Audio DMA pointer of audio in 2 */ -#define PCI_DMA_DDP 0x13C /* DEBI DMA pointer */ - -#define LEVEL_REP 0x140, -#define A_TIME_SLOT1 0x180, /* from 180 - 1BC */ -#define A_TIME_SLOT2 0x1C0, /* from 1C0 - 1FC */ - -/* isr masks */ -#define SPCI_PPEF 0x80000000 /* PCI parity error */ -#define SPCI_PABO 0x40000000 /* PCI access error (target or master abort) */ -#define SPCI_PPED 0x20000000 /* PCI parity error on 'real time data' */ -#define SPCI_RPS_I1 0x10000000 /* Interrupt issued by RPS1 */ -#define SPCI_RPS_I0 0x08000000 /* Interrupt issued by RPS0 */ -#define SPCI_RPS_LATE1 0x04000000 /* RPS task 1 is late */ -#define SPCI_RPS_LATE0 0x02000000 /* RPS task 0 is late */ -#define SPCI_RPS_E1 0x01000000 /* RPS error from task 1 */ -#define SPCI_RPS_E0 0x00800000 /* RPS error from task 0 */ -#define SPCI_RPS_TO1 0x00400000 /* RPS timeout task 1 */ -#define SPCI_RPS_TO0 0x00200000 /* RPS timeout task 0 */ -#define SPCI_UPLD 0x00100000 /* RPS in upload */ -#define SPCI_DEBI_S 0x00080000 /* DEBI status */ -#define SPCI_DEBI_E 0x00040000 /* DEBI error */ -#define SPCI_IIC_S 0x00020000 /* I2C status */ -#define SPCI_IIC_E 0x00010000 /* I2C error */ -#define SPCI_A2_IN 0x00008000 /* Audio 2 input DMA protection / limit */ -#define SPCI_A2_OUT 0x00004000 /* Audio 2 output DMA protection / limit */ -#define SPCI_A1_IN 0x00002000 /* Audio 1 input DMA protection / limit */ -#define SPCI_A1_OUT 0x00001000 /* Audio 1 output DMA protection / limit */ -#define SPCI_AFOU 0x00000800 /* Audio FIFO over- / underflow */ -#define SPCI_V_PE 0x00000400 /* Video protection address */ -#define SPCI_VFOU 0x00000200 /* Video FIFO over- / underflow */ -#define SPCI_FIDA 0x00000100 /* Field ID video port A */ -#define SPCI_FIDB 0x00000080 /* Field ID video port B */ -#define SPCI_PIN3 0x00000040 /* GPIO pin 3 */ -#define SPCI_PIN2 0x00000020 /* GPIO pin 2 */ -#define SPCI_PIN1 0x00000010 /* GPIO pin 1 */ -#define SPCI_PIN0 0x00000008 /* GPIO pin 0 */ -#define SPCI_ECS 0x00000004 /* Event counter 1, 2, 4, 5 */ -#define SPCI_EC3S 0x00000002 /* Event counter 3 */ -#define SPCI_EC0S 0x00000001 /* Event counter 0 */ - -/* i2c */ -#define SAA7146_I2C_ABORT (1<<7) -#define SAA7146_I2C_SPERR (1<<6) -#define SAA7146_I2C_APERR (1<<5) -#define SAA7146_I2C_DTERR (1<<4) -#define SAA7146_I2C_DRERR (1<<3) -#define SAA7146_I2C_AL (1<<2) -#define SAA7146_I2C_ERR (1<<1) -#define SAA7146_I2C_BUSY (1<<0) - -#define SAA7146_I2C_START (0x3) -#define SAA7146_I2C_CONT (0x2) -#define SAA7146_I2C_STOP (0x1) -#define SAA7146_I2C_NOP (0x0) - -#define SAA7146_I2C_BUS_BIT_RATE_6400 (0x500) -#define SAA7146_I2C_BUS_BIT_RATE_3200 (0x100) -#define SAA7146_I2C_BUS_BIT_RATE_480 (0x400) -#define SAA7146_I2C_BUS_BIT_RATE_320 (0x600) -#define SAA7146_I2C_BUS_BIT_RATE_240 (0x700) -#define SAA7146_I2C_BUS_BIT_RATE_120 (0x000) -#define SAA7146_I2C_BUS_BIT_RATE_80 (0x200) -#define SAA7146_I2C_BUS_BIT_RATE_60 (0x300) - -static inline void SAA7146_IER_DISABLE(struct saa7146_dev *x, unsigned y) -{ - unsigned long flags; - spin_lock_irqsave(&x->int_slock, flags); - saa7146_write(x, IER, saa7146_read(x, IER) & ~y); - spin_unlock_irqrestore(&x->int_slock, flags); -} - -static inline void SAA7146_IER_ENABLE(struct saa7146_dev *x, unsigned y) -{ - unsigned long flags; - spin_lock_irqsave(&x->int_slock, flags); - saa7146_write(x, IER, saa7146_read(x, IER) | y); - spin_unlock_irqrestore(&x->int_slock, flags); -} - -#endif diff --git a/drivers/staging/media/deprecated/saa7146/common/saa7146_core.c b/drivers/staging/media/deprecated/saa7146/common/saa7146_core.c deleted file mode 100644 index da21d346b870..000000000000 --- a/drivers/staging/media/deprecated/saa7146/common/saa7146_core.c +++ /dev/null @@ -1,578 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/* - saa7146.o - driver for generic saa7146-based hardware - - Copyright (C) 1998-2003 Michael Hunold - -*/ - -#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt - -#include -#include "saa7146.h" - -static int saa7146_num; - -unsigned int saa7146_debug; - -module_param(saa7146_debug, uint, 0644); -MODULE_PARM_DESC(saa7146_debug, "debug level (default: 0)"); - -#if 0 -static void dump_registers(struct saa7146_dev* dev) -{ - int i = 0; - - pr_info(" @ %li jiffies:\n", jiffies); - for (i = 0; i <= 0x148; i += 4) - pr_info("0x%03x: 0x%08x\n", i, saa7146_read(dev, i)); -} -#endif - -/**************************************************************************** - * gpio and debi helper functions - ****************************************************************************/ - -void saa7146_setgpio(struct saa7146_dev *dev, int port, u32 data) -{ - u32 value = 0; - - BUG_ON(port > 3); - - value = saa7146_read(dev, GPIO_CTRL); - value &= ~(0xff << (8*port)); - value |= (data << (8*port)); - saa7146_write(dev, GPIO_CTRL, value); -} - -/* This DEBI code is based on the saa7146 Stradis driver by Nathan Laredo */ -static inline int saa7146_wait_for_debi_done_sleep(struct saa7146_dev *dev, - unsigned long us1, unsigned long us2) -{ - unsigned long timeout; - int err; - - /* wait for registers to be programmed */ - timeout = jiffies + usecs_to_jiffies(us1); - while (1) { - err = time_after(jiffies, timeout); - if (saa7146_read(dev, MC2) & 2) - break; - if (err) { - pr_debug("%s: %s timed out while waiting for registers getting programmed\n", - dev->name, __func__); - return -ETIMEDOUT; - } - msleep(1); - } - - /* wait for transfer to complete */ - timeout = jiffies + usecs_to_jiffies(us2); - while (1) { - err = time_after(jiffies, timeout); - if (!(saa7146_read(dev, PSR) & SPCI_DEBI_S)) - break; - saa7146_read(dev, MC2); - if (err) { - DEB_S("%s: %s timed out while waiting for transfer completion\n", - dev->name, __func__); - return -ETIMEDOUT; - } - msleep(1); - } - - return 0; -} - -static inline int saa7146_wait_for_debi_done_busyloop(struct saa7146_dev *dev, - unsigned long us1, unsigned long us2) -{ - unsigned long loops; - - /* wait for registers to be programmed */ - loops = us1; - while (1) { - if (saa7146_read(dev, MC2) & 2) - break; - if (!loops--) { - pr_err("%s: %s timed out while waiting for registers getting programmed\n", - dev->name, __func__); - return -ETIMEDOUT; - } - udelay(1); - } - - /* wait for transfer to complete */ - loops = us2 / 5; - while (1) { - if (!(saa7146_read(dev, PSR) & SPCI_DEBI_S)) - break; - saa7146_read(dev, MC2); - if (!loops--) { - DEB_S("%s: %s timed out while waiting for transfer completion\n", - dev->name, __func__); - return -ETIMEDOUT; - } - udelay(5); - } - - return 0; -} - -int saa7146_wait_for_debi_done(struct saa7146_dev *dev, int nobusyloop) -{ - if (nobusyloop) - return saa7146_wait_for_debi_done_sleep(dev, 50000, 250000); - else - return saa7146_wait_for_debi_done_busyloop(dev, 50000, 250000); -} - -/**************************************************************************** - * general helper functions - ****************************************************************************/ - -/* this is videobuf_vmalloc_to_sg() from videobuf-dma-sg.c - make sure virt has been allocated with vmalloc_32(), otherwise the BUG() - may be triggered on highmem machines */ -static struct scatterlist* vmalloc_to_sg(unsigned char *virt, int nr_pages) -{ - struct scatterlist *sglist; - struct page *pg; - int i; - - sglist = kmalloc_array(nr_pages, sizeof(struct scatterlist), GFP_KERNEL); - if (NULL == sglist) - return NULL; - sg_init_table(sglist, nr_pages); - for (i = 0; i < nr_pages; i++, virt += PAGE_SIZE) { - pg = vmalloc_to_page(virt); - if (NULL == pg) - goto err; - BUG_ON(PageHighMem(pg)); - sg_set_page(&sglist[i], pg, PAGE_SIZE, 0); - } - return sglist; - - err: - kfree(sglist); - return NULL; -} - -/********************************************************************************/ -/* common page table functions */ - -void *saa7146_vmalloc_build_pgtable(struct pci_dev *pci, long length, struct saa7146_pgtable *pt) -{ - int pages = (length+PAGE_SIZE-1)/PAGE_SIZE; - void *mem = vmalloc_32(length); - int slen = 0; - - if (NULL == mem) - goto err_null; - - if (!(pt->slist = vmalloc_to_sg(mem, pages))) - goto err_free_mem; - - if (saa7146_pgtable_alloc(pci, pt)) - goto err_free_slist; - - pt->nents = pages; - slen = dma_map_sg(&pci->dev, pt->slist, pt->nents, DMA_FROM_DEVICE); - if (0 == slen) - goto err_free_pgtable; - - if (0 != saa7146_pgtable_build_single(pci, pt, pt->slist, slen)) - goto err_unmap_sg; - - return mem; - -err_unmap_sg: - dma_unmap_sg(&pci->dev, pt->slist, pt->nents, DMA_FROM_DEVICE); -err_free_pgtable: - saa7146_pgtable_free(pci, pt); -err_free_slist: - kfree(pt->slist); - pt->slist = NULL; -err_free_mem: - vfree(mem); -err_null: - return NULL; -} - -void saa7146_vfree_destroy_pgtable(struct pci_dev *pci, void *mem, struct saa7146_pgtable *pt) -{ - dma_unmap_sg(&pci->dev, pt->slist, pt->nents, DMA_FROM_DEVICE); - saa7146_pgtable_free(pci, pt); - kfree(pt->slist); - pt->slist = NULL; - vfree(mem); -} - -void saa7146_pgtable_free(struct pci_dev *pci, struct saa7146_pgtable *pt) -{ - if (NULL == pt->cpu) - return; - dma_free_coherent(&pci->dev, pt->size, pt->cpu, pt->dma); - pt->cpu = NULL; -} - -int saa7146_pgtable_alloc(struct pci_dev *pci, struct saa7146_pgtable *pt) -{ - __le32 *cpu; - dma_addr_t dma_addr = 0; - - cpu = dma_alloc_coherent(&pci->dev, PAGE_SIZE, &dma_addr, GFP_KERNEL); - if (NULL == cpu) { - return -ENOMEM; - } - pt->size = PAGE_SIZE; - pt->cpu = cpu; - pt->dma = dma_addr; - - return 0; -} - -int saa7146_pgtable_build_single(struct pci_dev *pci, struct saa7146_pgtable *pt, - struct scatterlist *list, int sglen ) -{ - __le32 *ptr, fill; - int nr_pages = 0; - int i,p; - - BUG_ON(0 == sglen); - BUG_ON(list->offset > PAGE_SIZE); - - /* if we have a user buffer, the first page may not be - aligned to a page boundary. */ - pt->offset = list->offset; - - ptr = pt->cpu; - for (i = 0; i < sglen; i++, list++) { -/* - pr_debug("i:%d, adr:0x%08x, len:%d, offset:%d\n", - i, sg_dma_address(list), sg_dma_len(list), - list->offset); -*/ - for (p = 0; p * 4096 < sg_dma_len(list); p++, ptr++) { - *ptr = cpu_to_le32(sg_dma_address(list) + p * 4096); - nr_pages++; - } - } - - - /* safety; fill the page table up with the last valid page */ - fill = *(ptr-1); - for(i=nr_pages;i<1024;i++) { - *ptr++ = fill; - } - -/* - ptr = pt->cpu; - pr_debug("offset: %d\n", pt->offset); - for(i=0;i<5;i++) { - pr_debug("ptr1 %d: 0x%08x\n", i, ptr[i]); - } -*/ - return 0; -} - -/********************************************************************************/ -/* interrupt handler */ -static irqreturn_t interrupt_hw(int irq, void *dev_id) -{ - struct saa7146_dev *dev = dev_id; - u32 isr; - u32 ack_isr; - - /* read out the interrupt status register */ - ack_isr = isr = saa7146_read(dev, ISR); - - /* is this our interrupt? */ - if ( 0 == isr ) { - /* nope, some other device */ - return IRQ_NONE; - } - - if (dev->ext) { - if (dev->ext->irq_mask & isr) { - if (dev->ext->irq_func) - dev->ext->irq_func(dev, &isr); - isr &= ~dev->ext->irq_mask; - } - } - if (0 != (isr & (MASK_27))) { - DEB_INT("irq: RPS0 (0x%08x)\n", isr); - if (dev->vv_data && dev->vv_callback) - dev->vv_callback(dev,isr); - isr &= ~MASK_27; - } - if (0 != (isr & (MASK_28))) { - if (dev->vv_data && dev->vv_callback) - dev->vv_callback(dev,isr); - isr &= ~MASK_28; - } - if (0 != (isr & (MASK_16|MASK_17))) { - SAA7146_IER_DISABLE(dev, MASK_16|MASK_17); - /* only wake up if we expect something */ - if (0 != dev->i2c_op) { - dev->i2c_op = 0; - wake_up(&dev->i2c_wq); - } else { - u32 psr = saa7146_read(dev, PSR); - u32 ssr = saa7146_read(dev, SSR); - pr_warn("%s: unexpected i2c irq: isr %08x psr %08x ssr %08x\n", - dev->name, isr, psr, ssr); - } - isr &= ~(MASK_16|MASK_17); - } - if( 0 != isr ) { - ERR("warning: interrupt enabled, but not handled properly.(0x%08x)\n", - isr); - ERR("disabling interrupt source(s)!\n"); - SAA7146_IER_DISABLE(dev,isr); - } - saa7146_write(dev, ISR, ack_isr); - return IRQ_HANDLED; -} - -/*********************************************************************************/ -/* configuration-functions */ - -static int saa7146_init_one(struct pci_dev *pci, const struct pci_device_id *ent) -{ - struct saa7146_pci_extension_data *pci_ext = (struct saa7146_pci_extension_data *)ent->driver_data; - struct saa7146_extension *ext = pci_ext->ext; - struct saa7146_dev *dev; - int err = -ENOMEM; - - /* clear out mem for sure */ - dev = kzalloc(sizeof(struct saa7146_dev), GFP_KERNEL); - if (!dev) { - ERR("out of memory\n"); - goto out; - } - - /* create a nice device name */ - sprintf(dev->name, "saa7146 (%d)", saa7146_num); - - DEB_EE("pci:%p\n", pci); - - err = pci_enable_device(pci); - if (err < 0) { - ERR("pci_enable_device() failed\n"); - goto err_free; - } - - /* enable bus-mastering */ - pci_set_master(pci); - - dev->pci = pci; - - /* get chip-revision; this is needed to enable bug-fixes */ - dev->revision = pci->revision; - - /* remap the memory from virtual to physical address */ - - err = pci_request_region(pci, 0, "saa7146"); - if (err < 0) - goto err_disable; - - dev->mem = ioremap(pci_resource_start(pci, 0), - pci_resource_len(pci, 0)); - if (!dev->mem) { - ERR("ioremap() failed\n"); - err = -ENODEV; - goto err_release; - } - - /* we don't do a master reset here anymore, it screws up - some boards that don't have an i2c-eeprom for configuration - values */ -/* - saa7146_write(dev, MC1, MASK_31); -*/ - - /* disable all irqs */ - saa7146_write(dev, IER, 0); - - /* shut down all dma transfers and rps tasks */ - saa7146_write(dev, MC1, 0x30ff0000); - - /* clear out any rps-signals pending */ - saa7146_write(dev, MC2, 0xf8000000); - - /* request an interrupt for the saa7146 */ - err = request_irq(pci->irq, interrupt_hw, IRQF_SHARED, - dev->name, dev); - if (err < 0) { - ERR("request_irq() failed\n"); - goto err_unmap; - } - - err = -ENOMEM; - - /* get memory for various stuff */ - dev->d_rps0.cpu_addr = dma_alloc_coherent(&pci->dev, SAA7146_RPS_MEM, - &dev->d_rps0.dma_handle, - GFP_KERNEL); - if (!dev->d_rps0.cpu_addr) - goto err_free_irq; - - dev->d_rps1.cpu_addr = dma_alloc_coherent(&pci->dev, SAA7146_RPS_MEM, - &dev->d_rps1.dma_handle, - GFP_KERNEL); - if (!dev->d_rps1.cpu_addr) - goto err_free_rps0; - - dev->d_i2c.cpu_addr = dma_alloc_coherent(&pci->dev, SAA7146_RPS_MEM, - &dev->d_i2c.dma_handle, GFP_KERNEL); - if (!dev->d_i2c.cpu_addr) - goto err_free_rps1; - - /* the rest + print status message */ - - pr_info("found saa7146 @ mem %p (revision %d, irq %d) (0x%04x,0x%04x)\n", - dev->mem, dev->revision, pci->irq, - pci->subsystem_vendor, pci->subsystem_device); - dev->ext = ext; - - mutex_init(&dev->v4l2_lock); - spin_lock_init(&dev->int_slock); - spin_lock_init(&dev->slock); - - mutex_init(&dev->i2c_lock); - - dev->module = THIS_MODULE; - init_waitqueue_head(&dev->i2c_wq); - - /* set some sane pci arbitrition values */ - saa7146_write(dev, PCI_BT_V1, 0x1c00101f); - - /* TODO: use the status code of the callback */ - - err = -ENODEV; - - if (ext->probe && ext->probe(dev)) { - DEB_D("ext->probe() failed for %p. skipping device.\n", dev); - goto err_free_i2c; - } - - if (ext->attach(dev, pci_ext)) { - DEB_D("ext->attach() failed for %p. skipping device.\n", dev); - goto err_free_i2c; - } - /* V4L extensions will set the pci drvdata to the v4l2_device in the - attach() above. So for those cards that do not use V4L we have to - set it explicitly. */ - pci_set_drvdata(pci, &dev->v4l2_dev); - - saa7146_num++; - - err = 0; -out: - return err; - -err_free_i2c: - dma_free_coherent(&pci->dev, SAA7146_RPS_MEM, dev->d_i2c.cpu_addr, - dev->d_i2c.dma_handle); -err_free_rps1: - dma_free_coherent(&pci->dev, SAA7146_RPS_MEM, dev->d_rps1.cpu_addr, - dev->d_rps1.dma_handle); -err_free_rps0: - dma_free_coherent(&pci->dev, SAA7146_RPS_MEM, dev->d_rps0.cpu_addr, - dev->d_rps0.dma_handle); -err_free_irq: - free_irq(pci->irq, (void *)dev); -err_unmap: - iounmap(dev->mem); -err_release: - pci_release_region(pci, 0); -err_disable: - pci_disable_device(pci); -err_free: - kfree(dev); - goto out; -} - -static void saa7146_remove_one(struct pci_dev *pdev) -{ - struct v4l2_device *v4l2_dev = pci_get_drvdata(pdev); - struct saa7146_dev *dev = to_saa7146_dev(v4l2_dev); - struct { - void *addr; - dma_addr_t dma; - } dev_map[] = { - { dev->d_i2c.cpu_addr, dev->d_i2c.dma_handle }, - { dev->d_rps1.cpu_addr, dev->d_rps1.dma_handle }, - { dev->d_rps0.cpu_addr, dev->d_rps0.dma_handle }, - { NULL, 0 } - }, *p; - - DEB_EE("dev:%p\n", dev); - - dev->ext->detach(dev); - - /* shut down all video dma transfers */ - saa7146_write(dev, MC1, 0x00ff0000); - - /* disable all irqs, release irq-routine */ - saa7146_write(dev, IER, 0); - - free_irq(pdev->irq, dev); - - for (p = dev_map; p->addr; p++) - dma_free_coherent(&pdev->dev, SAA7146_RPS_MEM, p->addr, - p->dma); - - iounmap(dev->mem); - pci_release_region(pdev, 0); - pci_disable_device(pdev); - kfree(dev); - - saa7146_num--; -} - -/*********************************************************************************/ -/* extension handling functions */ - -int saa7146_register_extension(struct saa7146_extension* ext) -{ - DEB_EE("ext:%p\n", ext); - - ext->driver.name = ext->name; - ext->driver.id_table = ext->pci_tbl; - ext->driver.probe = saa7146_init_one; - ext->driver.remove = saa7146_remove_one; - - pr_info("register extension '%s'\n", ext->name); - return pci_register_driver(&ext->driver); -} - -int saa7146_unregister_extension(struct saa7146_extension* ext) -{ - DEB_EE("ext:%p\n", ext); - pr_info("unregister extension '%s'\n", ext->name); - pci_unregister_driver(&ext->driver); - return 0; -} - -EXPORT_SYMBOL_GPL(saa7146_register_extension); -EXPORT_SYMBOL_GPL(saa7146_unregister_extension); - -/* misc functions used by extension modules */ -EXPORT_SYMBOL_GPL(saa7146_pgtable_alloc); -EXPORT_SYMBOL_GPL(saa7146_pgtable_free); -EXPORT_SYMBOL_GPL(saa7146_pgtable_build_single); -EXPORT_SYMBOL_GPL(saa7146_vmalloc_build_pgtable); -EXPORT_SYMBOL_GPL(saa7146_vfree_destroy_pgtable); -EXPORT_SYMBOL_GPL(saa7146_wait_for_debi_done); - -EXPORT_SYMBOL_GPL(saa7146_setgpio); - -EXPORT_SYMBOL_GPL(saa7146_i2c_adapter_prepare); - -EXPORT_SYMBOL_GPL(saa7146_debug); - -MODULE_AUTHOR("Michael Hunold "); -MODULE_DESCRIPTION("driver for generic saa7146-based hardware"); -MODULE_LICENSE("GPL"); diff --git a/drivers/staging/media/deprecated/saa7146/common/saa7146_fops.c b/drivers/staging/media/deprecated/saa7146/common/saa7146_fops.c deleted file mode 100644 index aa14698a9c54..000000000000 --- a/drivers/staging/media/deprecated/saa7146/common/saa7146_fops.c +++ /dev/null @@ -1,658 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt - -#include -#include "saa7146_vv.h" - -/****************************************************************************/ -/* resource management functions, shamelessly stolen from saa7134 driver */ - -int saa7146_res_get(struct saa7146_fh *fh, unsigned int bit) -{ - struct saa7146_dev *dev = fh->dev; - struct saa7146_vv *vv = dev->vv_data; - - if (fh->resources & bit) { - DEB_D("already allocated! want: 0x%02x, cur:0x%02x\n", - bit, vv->resources); - /* have it already allocated */ - return 1; - } - - /* is it free? */ - if (vv->resources & bit) { - DEB_D("locked! vv->resources:0x%02x, we want:0x%02x\n", - vv->resources, bit); - /* no, someone else uses it */ - return 0; - } - /* it's free, grab it */ - fh->resources |= bit; - vv->resources |= bit; - DEB_D("res: get 0x%02x, cur:0x%02x\n", bit, vv->resources); - return 1; -} - -void saa7146_res_free(struct saa7146_fh *fh, unsigned int bits) -{ - struct saa7146_dev *dev = fh->dev; - struct saa7146_vv *vv = dev->vv_data; - - BUG_ON((fh->resources & bits) != bits); - - fh->resources &= ~bits; - vv->resources &= ~bits; - DEB_D("res: put 0x%02x, cur:0x%02x\n", bits, vv->resources); -} - - -/********************************************************************************/ -/* common dma functions */ - -void saa7146_dma_free(struct saa7146_dev *dev,struct videobuf_queue *q, - struct saa7146_buf *buf) -{ - struct videobuf_dmabuf *dma=videobuf_to_dma(&buf->vb); - DEB_EE("dev:%p, buf:%p\n", dev, buf); - - videobuf_waiton(q, &buf->vb, 0, 0); - videobuf_dma_unmap(q->dev, dma); - videobuf_dma_free(dma); - buf->vb.state = VIDEOBUF_NEEDS_INIT; -} - - -/********************************************************************************/ -/* common buffer functions */ - -int saa7146_buffer_queue(struct saa7146_dev *dev, - struct saa7146_dmaqueue *q, - struct saa7146_buf *buf) -{ - assert_spin_locked(&dev->slock); - DEB_EE("dev:%p, dmaq:%p, buf:%p\n", dev, q, buf); - - BUG_ON(!q); - - if (NULL == q->curr) { - q->curr = buf; - DEB_D("immediately activating buffer %p\n", buf); - buf->activate(dev,buf,NULL); - } else { - list_add_tail(&buf->vb.queue,&q->queue); - buf->vb.state = VIDEOBUF_QUEUED; - DEB_D("adding buffer %p to queue. (active buffer present)\n", - buf); - } - return 0; -} - -void saa7146_buffer_finish(struct saa7146_dev *dev, - struct saa7146_dmaqueue *q, - int state) -{ - assert_spin_locked(&dev->slock); - DEB_EE("dev:%p, dmaq:%p, state:%d\n", dev, q, state); - DEB_EE("q->curr:%p\n", q->curr); - - /* finish current buffer */ - if (NULL == q->curr) { - DEB_D("aiii. no current buffer\n"); - return; - } - - q->curr->vb.state = state; - q->curr->vb.ts = ktime_get_ns(); - wake_up(&q->curr->vb.done); - - q->curr = NULL; -} - -void saa7146_buffer_next(struct saa7146_dev *dev, - struct saa7146_dmaqueue *q, int vbi) -{ - struct saa7146_buf *buf,*next = NULL; - - BUG_ON(!q); - - DEB_INT("dev:%p, dmaq:%p, vbi:%d\n", dev, q, vbi); - - assert_spin_locked(&dev->slock); - if (!list_empty(&q->queue)) { - /* activate next one from queue */ - buf = list_entry(q->queue.next,struct saa7146_buf,vb.queue); - list_del(&buf->vb.queue); - if (!list_empty(&q->queue)) - next = list_entry(q->queue.next,struct saa7146_buf, vb.queue); - q->curr = buf; - DEB_INT("next buffer: buf:%p, prev:%p, next:%p\n", - buf, q->queue.prev, q->queue.next); - buf->activate(dev,buf,next); - } else { - DEB_INT("no next buffer. stopping.\n"); - if( 0 != vbi ) { - /* turn off video-dma3 */ - saa7146_write(dev,MC1, MASK_20); - } else { - /* nothing to do -- just prevent next video-dma1 transfer - by lowering the protection address */ - - // fixme: fix this for vflip != 0 - - saa7146_write(dev, PROT_ADDR1, 0); - saa7146_write(dev, MC2, (MASK_02|MASK_18)); - - /* write the address of the rps-program */ - saa7146_write(dev, RPS_ADDR0, dev->d_rps0.dma_handle); - /* turn on rps */ - saa7146_write(dev, MC1, (MASK_12 | MASK_28)); - -/* - printk("vdma%d.base_even: 0x%08x\n", 1,saa7146_read(dev,BASE_EVEN1)); - printk("vdma%d.base_odd: 0x%08x\n", 1,saa7146_read(dev,BASE_ODD1)); - printk("vdma%d.prot_addr: 0x%08x\n", 1,saa7146_read(dev,PROT_ADDR1)); - printk("vdma%d.base_page: 0x%08x\n", 1,saa7146_read(dev,BASE_PAGE1)); - printk("vdma%d.pitch: 0x%08x\n", 1,saa7146_read(dev,PITCH1)); - printk("vdma%d.num_line_byte: 0x%08x\n", 1,saa7146_read(dev,NUM_LINE_BYTE1)); -*/ - } - del_timer(&q->timeout); - } -} - -void saa7146_buffer_timeout(struct timer_list *t) -{ - struct saa7146_dmaqueue *q = from_timer(q, t, timeout); - struct saa7146_dev *dev = q->dev; - unsigned long flags; - - DEB_EE("dev:%p, dmaq:%p\n", dev, q); - - spin_lock_irqsave(&dev->slock,flags); - if (q->curr) { - DEB_D("timeout on %p\n", q->curr); - saa7146_buffer_finish(dev,q,VIDEOBUF_ERROR); - } - - /* we don't restart the transfer here like other drivers do. when - a streaming capture is disabled, the timeout function will be - called for the current buffer. if we activate the next buffer now, - we mess up our capture logic. if a timeout occurs on another buffer, - then something is seriously broken before, so no need to buffer the - next capture IMHO... */ -/* - saa7146_buffer_next(dev,q); -*/ - spin_unlock_irqrestore(&dev->slock,flags); -} - -/********************************************************************************/ -/* file operations */ - -static int fops_open(struct file *file) -{ - struct video_device *vdev = video_devdata(file); - struct saa7146_dev *dev = video_drvdata(file); - struct saa7146_fh *fh = NULL; - int result = 0; - - DEB_EE("file:%p, dev:%s\n", file, video_device_node_name(vdev)); - - if (mutex_lock_interruptible(vdev->lock)) - return -ERESTARTSYS; - - DEB_D("using: %p\n", dev); - - /* check if an extension is registered */ - if( NULL == dev->ext ) { - DEB_S("no extension registered for this device\n"); - result = -ENODEV; - goto out; - } - - /* allocate per open data */ - fh = kzalloc(sizeof(*fh),GFP_KERNEL); - if (NULL == fh) { - DEB_S("cannot allocate memory for per open data\n"); - result = -ENOMEM; - goto out; - } - - v4l2_fh_init(&fh->fh, vdev); - - file->private_data = &fh->fh; - fh->dev = dev; - - if (vdev->vfl_type == VFL_TYPE_VBI) { - DEB_S("initializing vbi...\n"); - if (dev->ext_vv_data->capabilities & V4L2_CAP_VBI_CAPTURE) - result = saa7146_vbi_uops.open(dev,file); - if (dev->ext_vv_data->vbi_fops.open) - dev->ext_vv_data->vbi_fops.open(file); - } else { - DEB_S("initializing video...\n"); - result = saa7146_video_uops.open(dev,file); - } - - if (0 != result) { - goto out; - } - - if( 0 == try_module_get(dev->ext->module)) { - result = -EINVAL; - goto out; - } - - result = 0; - v4l2_fh_add(&fh->fh); -out: - if (fh && result != 0) { - kfree(fh); - file->private_data = NULL; - } - mutex_unlock(vdev->lock); - return result; -} - -static int fops_release(struct file *file) -{ - struct video_device *vdev = video_devdata(file); - struct saa7146_fh *fh = file->private_data; - struct saa7146_dev *dev = fh->dev; - - DEB_EE("file:%p\n", file); - - mutex_lock(vdev->lock); - - if (vdev->vfl_type == VFL_TYPE_VBI) { - if (dev->ext_vv_data->capabilities & V4L2_CAP_VBI_CAPTURE) - saa7146_vbi_uops.release(dev,file); - if (dev->ext_vv_data->vbi_fops.release) - dev->ext_vv_data->vbi_fops.release(file); - } else { - saa7146_video_uops.release(dev,file); - } - - v4l2_fh_del(&fh->fh); - v4l2_fh_exit(&fh->fh); - module_put(dev->ext->module); - file->private_data = NULL; - kfree(fh); - - mutex_unlock(vdev->lock); - - return 0; -} - -static int fops_mmap(struct file *file, struct vm_area_struct * vma) -{ - struct video_device *vdev = video_devdata(file); - struct saa7146_fh *fh = file->private_data; - struct videobuf_queue *q; - int res; - - switch (vdev->vfl_type) { - case VFL_TYPE_VIDEO: { - DEB_EE("V4L2_BUF_TYPE_VIDEO_CAPTURE: file:%p, vma:%p\n", - file, vma); - q = &fh->video_q; - break; - } - case VFL_TYPE_VBI: { - DEB_EE("V4L2_BUF_TYPE_VBI_CAPTURE: file:%p, vma:%p\n", - file, vma); - if (fh->dev->ext_vv_data->capabilities & V4L2_CAP_SLICED_VBI_OUTPUT) - return -ENODEV; - q = &fh->vbi_q; - break; - } - default: - BUG(); - } - - if (mutex_lock_interruptible(vdev->lock)) - return -ERESTARTSYS; - res = videobuf_mmap_mapper(q, vma); - mutex_unlock(vdev->lock); - return res; -} - -static __poll_t __fops_poll(struct file *file, struct poll_table_struct *wait) -{ - struct video_device *vdev = video_devdata(file); - struct saa7146_fh *fh = file->private_data; - struct videobuf_buffer *buf = NULL; - struct videobuf_queue *q; - __poll_t res = v4l2_ctrl_poll(file, wait); - - DEB_EE("file:%p, poll:%p\n", file, wait); - - if (vdev->vfl_type == VFL_TYPE_VBI) { - if (fh->dev->ext_vv_data->capabilities & V4L2_CAP_SLICED_VBI_OUTPUT) - return res | EPOLLOUT | EPOLLWRNORM; - if( 0 == fh->vbi_q.streaming ) - return res | videobuf_poll_stream(file, &fh->vbi_q, wait); - q = &fh->vbi_q; - } else { - DEB_D("using video queue\n"); - q = &fh->video_q; - } - - if (!list_empty(&q->stream)) - buf = list_entry(q->stream.next, struct videobuf_buffer, stream); - - if (!buf) { - DEB_D("buf == NULL!\n"); - return res | EPOLLERR; - } - - poll_wait(file, &buf->done, wait); - if (buf->state == VIDEOBUF_DONE || buf->state == VIDEOBUF_ERROR) { - DEB_D("poll succeeded!\n"); - return res | EPOLLIN | EPOLLRDNORM; - } - - DEB_D("nothing to poll for, buf->state:%d\n", buf->state); - return res; -} - -static __poll_t fops_poll(struct file *file, struct poll_table_struct *wait) -{ - struct video_device *vdev = video_devdata(file); - __poll_t res; - - mutex_lock(vdev->lock); - res = __fops_poll(file, wait); - mutex_unlock(vdev->lock); - return res; -} - -static ssize_t fops_read(struct file *file, char __user *data, size_t count, loff_t *ppos) -{ - struct video_device *vdev = video_devdata(file); - struct saa7146_fh *fh = file->private_data; - int ret; - - switch (vdev->vfl_type) { - case VFL_TYPE_VIDEO: -/* - DEB_EE("V4L2_BUF_TYPE_VIDEO_CAPTURE: file:%p, data:%p, count:%lun", - file, data, (unsigned long)count); -*/ - return saa7146_video_uops.read(file,data,count,ppos); - case VFL_TYPE_VBI: -/* - DEB_EE("V4L2_BUF_TYPE_VBI_CAPTURE: file:%p, data:%p, count:%lu\n", - file, data, (unsigned long)count); -*/ - if (fh->dev->ext_vv_data->capabilities & V4L2_CAP_VBI_CAPTURE) { - if (mutex_lock_interruptible(vdev->lock)) - return -ERESTARTSYS; - ret = saa7146_vbi_uops.read(file, data, count, ppos); - mutex_unlock(vdev->lock); - return ret; - } - return -EINVAL; - default: - BUG(); - } -} - -static ssize_t fops_write(struct file *file, const char __user *data, size_t count, loff_t *ppos) -{ - struct video_device *vdev = video_devdata(file); - struct saa7146_fh *fh = file->private_data; - int ret; - - switch (vdev->vfl_type) { - case VFL_TYPE_VIDEO: - return -EINVAL; - case VFL_TYPE_VBI: - if (fh->dev->ext_vv_data->vbi_fops.write) { - if (mutex_lock_interruptible(vdev->lock)) - return -ERESTARTSYS; - ret = fh->dev->ext_vv_data->vbi_fops.write(file, data, count, ppos); - mutex_unlock(vdev->lock); - return ret; - } - return -EINVAL; - default: - BUG(); - } -} - -static const struct v4l2_file_operations video_fops = -{ - .owner = THIS_MODULE, - .open = fops_open, - .release = fops_release, - .read = fops_read, - .write = fops_write, - .poll = fops_poll, - .mmap = fops_mmap, - .unlocked_ioctl = video_ioctl2, -}; - -static void vv_callback(struct saa7146_dev *dev, unsigned long status) -{ - u32 isr = status; - - DEB_INT("dev:%p, isr:0x%08x\n", dev, (u32)status); - - if (0 != (isr & (MASK_27))) { - DEB_INT("irq: RPS0 (0x%08x)\n", isr); - saa7146_video_uops.irq_done(dev,isr); - } - - if (0 != (isr & (MASK_28))) { - u32 mc2 = saa7146_read(dev, MC2); - if( 0 != (mc2 & MASK_15)) { - DEB_INT("irq: RPS1 vbi workaround (0x%08x)\n", isr); - wake_up(&dev->vv_data->vbi_wq); - saa7146_write(dev,MC2, MASK_31); - return; - } - DEB_INT("irq: RPS1 (0x%08x)\n", isr); - saa7146_vbi_uops.irq_done(dev,isr); - } -} - -static const struct v4l2_ctrl_ops saa7146_ctrl_ops = { - .s_ctrl = saa7146_s_ctrl, -}; - -int saa7146_vv_init(struct saa7146_dev* dev, struct saa7146_ext_vv *ext_vv) -{ - struct v4l2_ctrl_handler *hdl = &dev->ctrl_handler; - struct v4l2_pix_format *fmt; - struct v4l2_vbi_format *vbi; - struct saa7146_vv *vv; - int err; - - err = v4l2_device_register(&dev->pci->dev, &dev->v4l2_dev); - if (err) - return err; - - v4l2_ctrl_handler_init(hdl, 6); - v4l2_ctrl_new_std(hdl, &saa7146_ctrl_ops, - V4L2_CID_BRIGHTNESS, 0, 255, 1, 128); - v4l2_ctrl_new_std(hdl, &saa7146_ctrl_ops, - V4L2_CID_CONTRAST, 0, 127, 1, 64); - v4l2_ctrl_new_std(hdl, &saa7146_ctrl_ops, - V4L2_CID_SATURATION, 0, 127, 1, 64); - v4l2_ctrl_new_std(hdl, &saa7146_ctrl_ops, - V4L2_CID_VFLIP, 0, 1, 1, 0); - v4l2_ctrl_new_std(hdl, &saa7146_ctrl_ops, - V4L2_CID_HFLIP, 0, 1, 1, 0); - if (hdl->error) { - err = hdl->error; - v4l2_ctrl_handler_free(hdl); - v4l2_device_unregister(&dev->v4l2_dev); - return err; - } - dev->v4l2_dev.ctrl_handler = hdl; - - vv = kzalloc(sizeof(struct saa7146_vv), GFP_KERNEL); - if (vv == NULL) { - ERR("out of memory. aborting.\n"); - v4l2_ctrl_handler_free(hdl); - v4l2_device_unregister(&dev->v4l2_dev); - return -ENOMEM; - } - ext_vv->vid_ops = saa7146_video_ioctl_ops; - ext_vv->vbi_ops = saa7146_vbi_ioctl_ops; - ext_vv->core_ops = &saa7146_video_ioctl_ops; - - DEB_EE("dev:%p\n", dev); - - /* set default values for video parts of the saa7146 */ - saa7146_write(dev, BCS_CTRL, 0x80400040); - - /* enable video-port pins */ - saa7146_write(dev, MC1, (MASK_10 | MASK_26)); - - /* save per-device extension data (one extension can - handle different devices that might need different - configuration data) */ - dev->ext_vv_data = ext_vv; - - vv->d_clipping.cpu_addr = - dma_alloc_coherent(&dev->pci->dev, SAA7146_CLIPPING_MEM, - &vv->d_clipping.dma_handle, GFP_KERNEL); - if( NULL == vv->d_clipping.cpu_addr ) { - ERR("out of memory. aborting.\n"); - kfree(vv); - v4l2_ctrl_handler_free(hdl); - v4l2_device_unregister(&dev->v4l2_dev); - return -ENOMEM; - } - - saa7146_video_uops.init(dev,vv); - if (dev->ext_vv_data->capabilities & V4L2_CAP_VBI_CAPTURE) - saa7146_vbi_uops.init(dev,vv); - - vv->ov_fb.fmt.width = vv->standard->h_max_out; - vv->ov_fb.fmt.height = vv->standard->v_max_out; - vv->ov_fb.fmt.pixelformat = V4L2_PIX_FMT_RGB565; - vv->ov_fb.fmt.bytesperline = 2 * vv->ov_fb.fmt.width; - vv->ov_fb.fmt.sizeimage = vv->ov_fb.fmt.bytesperline * vv->ov_fb.fmt.height; - vv->ov_fb.fmt.colorspace = V4L2_COLORSPACE_SRGB; - - fmt = &vv->video_fmt; - fmt->width = 384; - fmt->height = 288; - fmt->pixelformat = V4L2_PIX_FMT_BGR24; - fmt->field = V4L2_FIELD_ANY; - fmt->colorspace = V4L2_COLORSPACE_SMPTE170M; - fmt->bytesperline = 3 * fmt->width; - fmt->sizeimage = fmt->bytesperline * fmt->height; - - vbi = &vv->vbi_fmt; - vbi->sampling_rate = 27000000; - vbi->offset = 248; /* todo */ - vbi->samples_per_line = 720 * 2; - vbi->sample_format = V4L2_PIX_FMT_GREY; - - /* fixme: this only works for PAL */ - vbi->start[0] = 5; - vbi->count[0] = 16; - vbi->start[1] = 312; - vbi->count[1] = 16; - - timer_setup(&vv->vbi_read_timeout, NULL, 0); - - vv->ov_fb.capability = V4L2_FBUF_CAP_LIST_CLIPPING; - vv->ov_fb.flags = V4L2_FBUF_FLAG_PRIMARY; - dev->vv_data = vv; - dev->vv_callback = &vv_callback; - - return 0; -} -EXPORT_SYMBOL_GPL(saa7146_vv_init); - -int saa7146_vv_release(struct saa7146_dev* dev) -{ - struct saa7146_vv *vv = dev->vv_data; - - DEB_EE("dev:%p\n", dev); - - v4l2_device_unregister(&dev->v4l2_dev); - dma_free_coherent(&dev->pci->dev, SAA7146_CLIPPING_MEM, - vv->d_clipping.cpu_addr, vv->d_clipping.dma_handle); - v4l2_ctrl_handler_free(&dev->ctrl_handler); - kfree(vv); - dev->vv_data = NULL; - dev->vv_callback = NULL; - - return 0; -} -EXPORT_SYMBOL_GPL(saa7146_vv_release); - -int saa7146_register_device(struct video_device *vfd, struct saa7146_dev *dev, - char *name, int type) -{ - int err; - int i; - - DEB_EE("dev:%p, name:'%s', type:%d\n", dev, name, type); - - vfd->fops = &video_fops; - if (type == VFL_TYPE_VIDEO) - vfd->ioctl_ops = &dev->ext_vv_data->vid_ops; - else - vfd->ioctl_ops = &dev->ext_vv_data->vbi_ops; - vfd->release = video_device_release_empty; - vfd->lock = &dev->v4l2_lock; - vfd->v4l2_dev = &dev->v4l2_dev; - vfd->tvnorms = 0; - for (i = 0; i < dev->ext_vv_data->num_stds; i++) - vfd->tvnorms |= dev->ext_vv_data->stds[i].id; - strscpy(vfd->name, name, sizeof(vfd->name)); - vfd->device_caps = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_VIDEO_OVERLAY | - V4L2_CAP_READWRITE | V4L2_CAP_STREAMING; - vfd->device_caps |= dev->ext_vv_data->capabilities; - if (type == VFL_TYPE_VIDEO) - vfd->device_caps &= - ~(V4L2_CAP_VBI_CAPTURE | V4L2_CAP_SLICED_VBI_OUTPUT); - else - vfd->device_caps &= - ~(V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_VIDEO_OVERLAY | V4L2_CAP_AUDIO); - video_set_drvdata(vfd, dev); - - err = video_register_device(vfd, type, -1); - if (err < 0) { - ERR("cannot register v4l2 device. skipping.\n"); - return err; - } - - pr_info("%s: registered device %s [v4l2]\n", - dev->name, video_device_node_name(vfd)); - return 0; -} -EXPORT_SYMBOL_GPL(saa7146_register_device); - -int saa7146_unregister_device(struct video_device *vfd, struct saa7146_dev *dev) -{ - DEB_EE("dev:%p\n", dev); - - video_unregister_device(vfd); - return 0; -} -EXPORT_SYMBOL_GPL(saa7146_unregister_device); - -static int __init saa7146_vv_init_module(void) -{ - return 0; -} - - -static void __exit saa7146_vv_cleanup_module(void) -{ -} - -module_init(saa7146_vv_init_module); -module_exit(saa7146_vv_cleanup_module); - -MODULE_AUTHOR("Michael Hunold "); -MODULE_DESCRIPTION("video4linux driver for saa7146-based hardware"); -MODULE_LICENSE("GPL"); diff --git a/drivers/staging/media/deprecated/saa7146/common/saa7146_hlp.c b/drivers/staging/media/deprecated/saa7146/common/saa7146_hlp.c deleted file mode 100644 index b1222a4cfa4a..000000000000 --- a/drivers/staging/media/deprecated/saa7146/common/saa7146_hlp.c +++ /dev/null @@ -1,1046 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt - -#include -#include -#include "saa7146_vv.h" - -static void calculate_output_format_register(struct saa7146_dev* saa, u32 palette, u32* clip_format) -{ - /* clear out the necessary bits */ - *clip_format &= 0x0000ffff; - /* set these bits new */ - *clip_format |= (( ((palette&0xf00)>>8) << 30) | ((palette&0x00f) << 24) | (((palette&0x0f0)>>4) << 16)); -} - -static void calculate_hps_source_and_sync(struct saa7146_dev *dev, int source, int sync, u32* hps_ctrl) -{ - *hps_ctrl &= ~(MASK_30 | MASK_31 | MASK_28); - *hps_ctrl |= (source << 30) | (sync << 28); -} - -static void calculate_hxo_and_hyo(struct saa7146_vv *vv, u32* hps_h_scale, u32* hps_ctrl) -{ - int hyo = 0, hxo = 0; - - hyo = vv->standard->v_offset; - hxo = vv->standard->h_offset; - - *hps_h_scale &= ~(MASK_B0 | 0xf00); - *hps_h_scale |= (hxo << 0); - - *hps_ctrl &= ~(MASK_W0 | MASK_B2); - *hps_ctrl |= (hyo << 12); -} - -/* helper functions for the calculation of the horizontal- and vertical - scaling registers, clip-format-register etc ... - these functions take pointers to the (most-likely read-out - original-values) and manipulate them according to the requested - changes. -*/ - -/* hps_coeff used for CXY and CXUV; scale 1/1 -> scale 1/64 */ -static struct { - u16 hps_coeff; - u16 weight_sum; -} hps_h_coeff_tab [] = { - {0x00, 2}, {0x02, 4}, {0x00, 4}, {0x06, 8}, {0x02, 8}, - {0x08, 8}, {0x00, 8}, {0x1E, 16}, {0x0E, 8}, {0x26, 8}, - {0x06, 8}, {0x42, 8}, {0x02, 8}, {0x80, 8}, {0x00, 8}, - {0xFE, 16}, {0xFE, 8}, {0x7E, 8}, {0x7E, 8}, {0x3E, 8}, - {0x3E, 8}, {0x1E, 8}, {0x1E, 8}, {0x0E, 8}, {0x0E, 8}, - {0x06, 8}, {0x06, 8}, {0x02, 8}, {0x02, 8}, {0x00, 8}, - {0x00, 8}, {0xFE, 16}, {0xFE, 8}, {0xFE, 8}, {0xFE, 8}, - {0xFE, 8}, {0xFE, 8}, {0xFE, 8}, {0xFE, 8}, {0xFE, 8}, - {0xFE, 8}, {0xFE, 8}, {0xFE, 8}, {0xFE, 8}, {0xFE, 8}, - {0xFE, 8}, {0xFE, 8}, {0xFE, 8}, {0xFE, 8}, {0x7E, 8}, - {0x7E, 8}, {0x3E, 8}, {0x3E, 8}, {0x1E, 8}, {0x1E, 8}, - {0x0E, 8}, {0x0E, 8}, {0x06, 8}, {0x06, 8}, {0x02, 8}, - {0x02, 8}, {0x00, 8}, {0x00, 8}, {0xFE, 16} -}; - -/* table of attenuation values for horizontal scaling */ -static u8 h_attenuation[] = { 1, 2, 4, 8, 2, 4, 8, 16, 0}; - -/* calculate horizontal scale registers */ -static int calculate_h_scale_registers(struct saa7146_dev *dev, - int in_x, int out_x, int flip_lr, - u32* hps_ctrl, u32* hps_v_gain, u32* hps_h_prescale, u32* hps_h_scale) -{ - /* horizontal prescaler */ - u32 dcgx = 0, xpsc = 0, xacm = 0, cxy = 0, cxuv = 0; - /* horizontal scaler */ - u32 xim = 0, xp = 0, xsci =0; - /* vertical scale & gain */ - u32 pfuv = 0; - - /* helper variables */ - u32 h_atten = 0, i = 0; - - if ( 0 == out_x ) { - return -EINVAL; - } - - /* mask out vanity-bit */ - *hps_ctrl &= ~MASK_29; - - /* calculate prescale-(xspc)-value: [n .. 1/2) : 1 - [1/2 .. 1/3) : 2 - [1/3 .. 1/4) : 3 - ... */ - if (in_x > out_x) { - xpsc = in_x / out_x; - } - else { - /* zooming */ - xpsc = 1; - } - - /* if flip_lr-bit is set, number of pixels after - horizontal prescaling must be < 384 */ - if ( 0 != flip_lr ) { - - /* set vanity bit */ - *hps_ctrl |= MASK_29; - - while (in_x / xpsc >= 384 ) - xpsc++; - } - /* if zooming is wanted, number of pixels after - horizontal prescaling must be < 768 */ - else { - while ( in_x / xpsc >= 768 ) - xpsc++; - } - - /* maximum prescale is 64 (p.69) */ - if ( xpsc > 64 ) - xpsc = 64; - - /* keep xacm clear*/ - xacm = 0; - - /* set horizontal filter parameters (CXY = CXUV) */ - cxy = hps_h_coeff_tab[( (xpsc - 1) < 63 ? (xpsc - 1) : 63 )].hps_coeff; - cxuv = cxy; - - /* calculate and set horizontal fine scale (xsci) */ - - /* bypass the horizontal scaler ? */ - if ( (in_x == out_x) && ( 1 == xpsc ) ) - xsci = 0x400; - else - xsci = ( (1024 * in_x) / (out_x * xpsc) ) + xpsc; - - /* set start phase for horizontal fine scale (xp) to 0 */ - xp = 0; - - /* set xim, if we bypass the horizontal scaler */ - if ( 0x400 == xsci ) - xim = 1; - else - xim = 0; - - /* if the prescaler is bypassed, enable horizontal - accumulation mode (xacm) and clear dcgx */ - if( 1 == xpsc ) { - xacm = 1; - dcgx = 0; - } else { - xacm = 0; - /* get best match in the table of attenuations - for horizontal scaling */ - h_atten = hps_h_coeff_tab[( (xpsc - 1) < 63 ? (xpsc - 1) : 63 )].weight_sum; - - for (i = 0; h_attenuation[i] != 0; i++) { - if (h_attenuation[i] >= h_atten) - break; - } - - dcgx = i; - } - - /* the horizontal scaling increment controls the UV filter - to reduce the bandwidth to improve the display quality, - so set it ... */ - if ( xsci == 0x400) - pfuv = 0x00; - else if ( xsci < 0x600) - pfuv = 0x01; - else if ( xsci < 0x680) - pfuv = 0x11; - else if ( xsci < 0x700) - pfuv = 0x22; - else - pfuv = 0x33; - - - *hps_v_gain &= MASK_W0|MASK_B2; - *hps_v_gain |= (pfuv << 24); - - *hps_h_scale &= ~(MASK_W1 | 0xf000); - *hps_h_scale |= (xim << 31) | (xp << 24) | (xsci << 12); - - *hps_h_prescale |= (dcgx << 27) | ((xpsc-1) << 18) | (xacm << 17) | (cxy << 8) | (cxuv << 0); - - return 0; -} - -static struct { - u16 hps_coeff; - u16 weight_sum; -} hps_v_coeff_tab [] = { - {0x0100, 2}, {0x0102, 4}, {0x0300, 4}, {0x0106, 8}, {0x0502, 8}, - {0x0708, 8}, {0x0F00, 8}, {0x011E, 16}, {0x110E, 16}, {0x1926, 16}, - {0x3906, 16}, {0x3D42, 16}, {0x7D02, 16}, {0x7F80, 16}, {0xFF00, 16}, - {0x01FE, 32}, {0x01FE, 32}, {0x817E, 32}, {0x817E, 32}, {0xC13E, 32}, - {0xC13E, 32}, {0xE11E, 32}, {0xE11E, 32}, {0xF10E, 32}, {0xF10E, 32}, - {0xF906, 32}, {0xF906, 32}, {0xFD02, 32}, {0xFD02, 32}, {0xFF00, 32}, - {0xFF00, 32}, {0x01FE, 64}, {0x01FE, 64}, {0x01FE, 64}, {0x01FE, 64}, - {0x01FE, 64}, {0x01FE, 64}, {0x01FE, 64}, {0x01FE, 64}, {0x01FE, 64}, - {0x01FE, 64}, {0x01FE, 64}, {0x01FE, 64}, {0x01FE, 64}, {0x01FE, 64}, - {0x01FE, 64}, {0x01FE, 64}, {0x01FE, 64}, {0x01FE, 64}, {0x817E, 64}, - {0x817E, 64}, {0xC13E, 64}, {0xC13E, 64}, {0xE11E, 64}, {0xE11E, 64}, - {0xF10E, 64}, {0xF10E, 64}, {0xF906, 64}, {0xF906, 64}, {0xFD02, 64}, - {0xFD02, 64}, {0xFF00, 64}, {0xFF00, 64}, {0x01FE, 128} -}; - -/* table of attenuation values for vertical scaling */ -static u16 v_attenuation[] = { 2, 4, 8, 16, 32, 64, 128, 256, 0}; - -/* calculate vertical scale registers */ -static int calculate_v_scale_registers(struct saa7146_dev *dev, enum v4l2_field field, - int in_y, int out_y, u32* hps_v_scale, u32* hps_v_gain) -{ - int lpi = 0; - - /* vertical scaling */ - u32 yacm = 0, ysci = 0, yacl = 0, ypo = 0, ype = 0; - /* vertical scale & gain */ - u32 dcgy = 0, cya_cyb = 0; - - /* helper variables */ - u32 v_atten = 0, i = 0; - - /* error, if vertical zooming */ - if ( in_y < out_y ) { - return -EINVAL; - } - - /* linear phase interpolation may be used - if scaling is between 1 and 1/2 (both fields used) - or scaling is between 1/2 and 1/4 (if only one field is used) */ - - if (V4L2_FIELD_HAS_BOTH(field)) { - if( 2*out_y >= in_y) { - lpi = 1; - } - } else if (field == V4L2_FIELD_TOP - || field == V4L2_FIELD_ALTERNATE - || field == V4L2_FIELD_BOTTOM) { - if( 4*out_y >= in_y ) { - lpi = 1; - } - out_y *= 2; - } - if( 0 != lpi ) { - - yacm = 0; - yacl = 0; - cya_cyb = 0x00ff; - - /* calculate scaling increment */ - if ( in_y > out_y ) - ysci = ((1024 * in_y) / (out_y + 1)) - 1024; - else - ysci = 0; - - dcgy = 0; - - /* calculate ype and ypo */ - ype = ysci / 16; - ypo = ype + (ysci / 64); - - } else { - yacm = 1; - - /* calculate scaling increment */ - ysci = (((10 * 1024 * (in_y - out_y - 1)) / in_y) + 9) / 10; - - /* calculate ype and ypo */ - ypo = ype = ((ysci + 15) / 16); - - /* the sequence length interval (yacl) has to be set according - to the prescale value, e.g. [n .. 1/2) : 0 - [1/2 .. 1/3) : 1 - [1/3 .. 1/4) : 2 - ... */ - if ( ysci < 512) { - yacl = 0; - } else { - yacl = ( ysci / (1024 - ysci) ); - } - - /* get filter coefficients for cya, cyb from table hps_v_coeff_tab */ - cya_cyb = hps_v_coeff_tab[ (yacl < 63 ? yacl : 63 ) ].hps_coeff; - - /* get best match in the table of attenuations for vertical scaling */ - v_atten = hps_v_coeff_tab[ (yacl < 63 ? yacl : 63 ) ].weight_sum; - - for (i = 0; v_attenuation[i] != 0; i++) { - if (v_attenuation[i] >= v_atten) - break; - } - - dcgy = i; - } - - /* ypo and ype swapped in spec ? */ - *hps_v_scale |= (yacm << 31) | (ysci << 21) | (yacl << 15) | (ypo << 8 ) | (ype << 1); - - *hps_v_gain &= ~(MASK_W0|MASK_B2); - *hps_v_gain |= (dcgy << 16) | (cya_cyb << 0); - - return 0; -} - -/* simple bubble-sort algorithm with duplicate elimination */ -static int sort_and_eliminate(u32* values, int* count) -{ - int low = 0, high = 0, top = 0; - int cur = 0, next = 0; - - /* sanity checks */ - if( (0 > *count) || (NULL == values) ) { - return -EINVAL; - } - - /* bubble sort the first @count items of the array @values */ - for( top = *count; top > 0; top--) { - for( low = 0, high = 1; high < top; low++, high++) { - if( values[low] > values[high] ) - swap(values[low], values[high]); - } - } - - /* remove duplicate items */ - for( cur = 0, next = 1; next < *count; next++) { - if( values[cur] != values[next]) - values[++cur] = values[next]; - } - - *count = cur + 1; - - return 0; -} - -static void calculate_clipping_registers_rect(struct saa7146_dev *dev, struct saa7146_fh *fh, - struct saa7146_video_dma *vdma2, u32* clip_format, u32* arbtr_ctrl, enum v4l2_field field) -{ - struct saa7146_vv *vv = dev->vv_data; - __le32 *clipping = vv->d_clipping.cpu_addr; - - int width = vv->ov.win.w.width; - int height = vv->ov.win.w.height; - int clipcount = vv->ov.nclips; - - u32 line_list[32]; - u32 pixel_list[32]; - int numdwords = 0; - - int i = 0, j = 0; - int cnt_line = 0, cnt_pixel = 0; - - int x[32], y[32], w[32], h[32]; - - /* clear out memory */ - memset(&line_list[0], 0x00, sizeof(u32)*32); - memset(&pixel_list[0], 0x00, sizeof(u32)*32); - memset(clipping, 0x00, SAA7146_CLIPPING_MEM); - - /* fill the line and pixel-lists */ - for(i = 0; i < clipcount; i++) { - int l = 0, r = 0, t = 0, b = 0; - - x[i] = vv->ov.clips[i].c.left; - y[i] = vv->ov.clips[i].c.top; - w[i] = vv->ov.clips[i].c.width; - h[i] = vv->ov.clips[i].c.height; - - if( w[i] < 0) { - x[i] += w[i]; w[i] = -w[i]; - } - if( h[i] < 0) { - y[i] += h[i]; h[i] = -h[i]; - } - if( x[i] < 0) { - w[i] += x[i]; x[i] = 0; - } - if( y[i] < 0) { - h[i] += y[i]; y[i] = 0; - } - if( 0 != vv->vflip ) { - y[i] = height - y[i] - h[i]; - } - - l = x[i]; - r = x[i]+w[i]; - t = y[i]; - b = y[i]+h[i]; - - /* insert left/right coordinates */ - pixel_list[ 2*i ] = min_t(int, l, width); - pixel_list[(2*i)+1] = min_t(int, r, width); - /* insert top/bottom coordinates */ - line_list[ 2*i ] = min_t(int, t, height); - line_list[(2*i)+1] = min_t(int, b, height); - } - - /* sort and eliminate lists */ - cnt_line = cnt_pixel = 2*clipcount; - sort_and_eliminate( &pixel_list[0], &cnt_pixel ); - sort_and_eliminate( &line_list[0], &cnt_line ); - - /* calculate the number of used u32s */ - numdwords = max_t(int, (cnt_line+1), (cnt_pixel+1))*2; - numdwords = max_t(int, 4, numdwords); - numdwords = min_t(int, 64, numdwords); - - /* fill up cliptable */ - for(i = 0; i < cnt_pixel; i++) { - clipping[2*i] |= cpu_to_le32(pixel_list[i] << 16); - } - for(i = 0; i < cnt_line; i++) { - clipping[(2*i)+1] |= cpu_to_le32(line_list[i] << 16); - } - - /* fill up cliptable with the display infos */ - for(j = 0; j < clipcount; j++) { - - for(i = 0; i < cnt_pixel; i++) { - - if( x[j] < 0) - x[j] = 0; - - if( pixel_list[i] < (x[j] + w[j])) { - - if ( pixel_list[i] >= x[j] ) { - clipping[2*i] |= cpu_to_le32(1 << j); - } - } - } - for(i = 0; i < cnt_line; i++) { - - if( y[j] < 0) - y[j] = 0; - - if( line_list[i] < (y[j] + h[j]) ) { - - if( line_list[i] >= y[j] ) { - clipping[(2*i)+1] |= cpu_to_le32(1 << j); - } - } - } - } - - /* adjust arbitration control register */ - *arbtr_ctrl &= 0xffff00ff; - *arbtr_ctrl |= 0x00001c00; - - vdma2->base_even = vv->d_clipping.dma_handle; - vdma2->base_odd = vv->d_clipping.dma_handle; - vdma2->prot_addr = vv->d_clipping.dma_handle+((sizeof(u32))*(numdwords)); - vdma2->base_page = 0x04; - vdma2->pitch = 0x00; - vdma2->num_line_byte = (0 << 16 | (sizeof(u32))*(numdwords-1) ); - - /* set clipping-mode. this depends on the field(s) used */ - *clip_format &= 0xfffffff7; - if (V4L2_FIELD_HAS_BOTH(field)) { - *clip_format |= 0x00000008; - } else { - *clip_format |= 0x00000000; - } -} - -/* disable clipping */ -static void saa7146_disable_clipping(struct saa7146_dev *dev) -{ - u32 clip_format = saa7146_read(dev, CLIP_FORMAT_CTRL); - - /* mask out relevant bits (=lower word)*/ - clip_format &= MASK_W1; - - /* upload clipping-registers*/ - saa7146_write(dev, CLIP_FORMAT_CTRL,clip_format); - saa7146_write(dev, MC2, (MASK_05 | MASK_21)); - - /* disable video dma2 */ - saa7146_write(dev, MC1, MASK_21); -} - -static void saa7146_set_clipping_rect(struct saa7146_fh *fh) -{ - struct saa7146_dev *dev = fh->dev; - struct saa7146_vv *vv = dev->vv_data; - enum v4l2_field field = vv->ov.win.field; - struct saa7146_video_dma vdma2; - u32 clip_format; - u32 arbtr_ctrl; - - /* check clipcount, disable clipping if clipcount == 0*/ - if (vv->ov.nclips == 0) { - saa7146_disable_clipping(dev); - return; - } - - clip_format = saa7146_read(dev, CLIP_FORMAT_CTRL); - arbtr_ctrl = saa7146_read(dev, PCI_BT_V1); - - calculate_clipping_registers_rect(dev, fh, &vdma2, &clip_format, &arbtr_ctrl, field); - - /* set clipping format */ - clip_format &= 0xffff0008; - clip_format |= (SAA7146_CLIPPING_RECT << 4); - - /* prepare video dma2 */ - saa7146_write(dev, BASE_EVEN2, vdma2.base_even); - saa7146_write(dev, BASE_ODD2, vdma2.base_odd); - saa7146_write(dev, PROT_ADDR2, vdma2.prot_addr); - saa7146_write(dev, BASE_PAGE2, vdma2.base_page); - saa7146_write(dev, PITCH2, vdma2.pitch); - saa7146_write(dev, NUM_LINE_BYTE2, vdma2.num_line_byte); - - /* prepare the rest */ - saa7146_write(dev, CLIP_FORMAT_CTRL,clip_format); - saa7146_write(dev, PCI_BT_V1, arbtr_ctrl); - - /* upload clip_control-register, clipping-registers, enable video dma2 */ - saa7146_write(dev, MC2, (MASK_05 | MASK_21 | MASK_03 | MASK_19)); - saa7146_write(dev, MC1, (MASK_05 | MASK_21)); -} - -static void saa7146_set_window(struct saa7146_dev *dev, int width, int height, enum v4l2_field field) -{ - struct saa7146_vv *vv = dev->vv_data; - - int source = vv->current_hps_source; - int sync = vv->current_hps_sync; - - u32 hps_v_scale = 0, hps_v_gain = 0, hps_ctrl = 0, hps_h_prescale = 0, hps_h_scale = 0; - - /* set vertical scale */ - hps_v_scale = 0; /* all bits get set by the function-call */ - hps_v_gain = 0; /* fixme: saa7146_read(dev, HPS_V_GAIN);*/ - calculate_v_scale_registers(dev, field, vv->standard->v_field*2, height, &hps_v_scale, &hps_v_gain); - - /* set horizontal scale */ - hps_ctrl = 0; - hps_h_prescale = 0; /* all bits get set in the function */ - hps_h_scale = 0; - calculate_h_scale_registers(dev, vv->standard->h_pixels, width, vv->hflip, &hps_ctrl, &hps_v_gain, &hps_h_prescale, &hps_h_scale); - - /* set hyo and hxo */ - calculate_hxo_and_hyo(vv, &hps_h_scale, &hps_ctrl); - calculate_hps_source_and_sync(dev, source, sync, &hps_ctrl); - - /* write out new register contents */ - saa7146_write(dev, HPS_V_SCALE, hps_v_scale); - saa7146_write(dev, HPS_V_GAIN, hps_v_gain); - saa7146_write(dev, HPS_CTRL, hps_ctrl); - saa7146_write(dev, HPS_H_PRESCALE,hps_h_prescale); - saa7146_write(dev, HPS_H_SCALE, hps_h_scale); - - /* upload shadow-ram registers */ - saa7146_write(dev, MC2, (MASK_05 | MASK_06 | MASK_21 | MASK_22) ); -} - -/* calculate the new memory offsets for a desired position */ -static void saa7146_set_position(struct saa7146_dev *dev, int w_x, int w_y, int w_height, enum v4l2_field field, u32 pixelformat) -{ - struct saa7146_vv *vv = dev->vv_data; - struct saa7146_format *sfmt = saa7146_format_by_fourcc(dev, pixelformat); - - int b_depth = vv->ov_fmt->depth; - int b_bpl = vv->ov_fb.fmt.bytesperline; - /* The unsigned long cast is to remove a 64-bit compile warning since - it looks like a 64-bit address is cast to a 32-bit value, even - though the base pointer is really a 32-bit physical address that - goes into a 32-bit DMA register. - FIXME: might not work on some 64-bit platforms, but see the FIXME - in struct v4l2_framebuffer (videodev2.h) for that. - */ - u32 base = (u32)(unsigned long)vv->ov_fb.base; - - struct saa7146_video_dma vdma1; - - /* calculate memory offsets for picture, look if we shall top-down-flip */ - vdma1.pitch = 2*b_bpl; - if ( 0 == vv->vflip ) { - vdma1.base_even = base + (w_y * (vdma1.pitch/2)) + (w_x * (b_depth / 8)); - vdma1.base_odd = vdma1.base_even + (vdma1.pitch / 2); - vdma1.prot_addr = vdma1.base_even + (w_height * (vdma1.pitch / 2)); - } - else { - vdma1.base_even = base + ((w_y+w_height) * (vdma1.pitch/2)) + (w_x * (b_depth / 8)); - vdma1.base_odd = vdma1.base_even - (vdma1.pitch / 2); - vdma1.prot_addr = vdma1.base_odd - (w_height * (vdma1.pitch / 2)); - } - - if (V4L2_FIELD_HAS_BOTH(field)) { - } else if (field == V4L2_FIELD_ALTERNATE) { - /* fixme */ - vdma1.base_odd = vdma1.prot_addr; - vdma1.pitch /= 2; - } else if (field == V4L2_FIELD_TOP) { - vdma1.base_odd = vdma1.prot_addr; - vdma1.pitch /= 2; - } else if (field == V4L2_FIELD_BOTTOM) { - vdma1.base_odd = vdma1.base_even; - vdma1.base_even = vdma1.prot_addr; - vdma1.pitch /= 2; - } - - if ( 0 != vv->vflip ) { - vdma1.pitch *= -1; - } - - vdma1.base_page = sfmt->swap; - vdma1.num_line_byte = (vv->standard->v_field<<16)+vv->standard->h_pixels; - - saa7146_write_out_dma(dev, 1, &vdma1); -} - -static void saa7146_set_output_format(struct saa7146_dev *dev, unsigned long palette) -{ - u32 clip_format = saa7146_read(dev, CLIP_FORMAT_CTRL); - - /* call helper function */ - calculate_output_format_register(dev,palette,&clip_format); - - /* update the hps registers */ - saa7146_write(dev, CLIP_FORMAT_CTRL, clip_format); - saa7146_write(dev, MC2, (MASK_05 | MASK_21)); -} - -/* select input-source */ -void saa7146_set_hps_source_and_sync(struct saa7146_dev *dev, int source, int sync) -{ - struct saa7146_vv *vv = dev->vv_data; - u32 hps_ctrl = 0; - - /* read old state */ - hps_ctrl = saa7146_read(dev, HPS_CTRL); - - hps_ctrl &= ~( MASK_31 | MASK_30 | MASK_28 ); - hps_ctrl |= (source << 30) | (sync << 28); - - /* write back & upload register */ - saa7146_write(dev, HPS_CTRL, hps_ctrl); - saa7146_write(dev, MC2, (MASK_05 | MASK_21)); - - vv->current_hps_source = source; - vv->current_hps_sync = sync; -} -EXPORT_SYMBOL_GPL(saa7146_set_hps_source_and_sync); - -int saa7146_enable_overlay(struct saa7146_fh *fh) -{ - struct saa7146_dev *dev = fh->dev; - struct saa7146_vv *vv = dev->vv_data; - - saa7146_set_window(dev, vv->ov.win.w.width, vv->ov.win.w.height, vv->ov.win.field); - saa7146_set_position(dev, vv->ov.win.w.left, vv->ov.win.w.top, vv->ov.win.w.height, vv->ov.win.field, vv->ov_fmt->pixelformat); - saa7146_set_output_format(dev, vv->ov_fmt->trans); - saa7146_set_clipping_rect(fh); - - /* enable video dma1 */ - saa7146_write(dev, MC1, (MASK_06 | MASK_22)); - return 0; -} - -void saa7146_disable_overlay(struct saa7146_fh *fh) -{ - struct saa7146_dev *dev = fh->dev; - - /* disable clipping + video dma1 */ - saa7146_disable_clipping(dev); - saa7146_write(dev, MC1, MASK_22); -} - -void saa7146_write_out_dma(struct saa7146_dev* dev, int which, struct saa7146_video_dma* vdma) -{ - int where = 0; - - if( which < 1 || which > 3) { - return; - } - - /* calculate starting address */ - where = (which-1)*0x18; - - saa7146_write(dev, where, vdma->base_odd); - saa7146_write(dev, where+0x04, vdma->base_even); - saa7146_write(dev, where+0x08, vdma->prot_addr); - saa7146_write(dev, where+0x0c, vdma->pitch); - saa7146_write(dev, where+0x10, vdma->base_page); - saa7146_write(dev, where+0x14, vdma->num_line_byte); - - /* upload */ - saa7146_write(dev, MC2, (MASK_02<<(which-1))|(MASK_18<<(which-1))); -/* - printk("vdma%d.base_even: 0x%08x\n", which,vdma->base_even); - printk("vdma%d.base_odd: 0x%08x\n", which,vdma->base_odd); - printk("vdma%d.prot_addr: 0x%08x\n", which,vdma->prot_addr); - printk("vdma%d.base_page: 0x%08x\n", which,vdma->base_page); - printk("vdma%d.pitch: 0x%08x\n", which,vdma->pitch); - printk("vdma%d.num_line_byte: 0x%08x\n", which,vdma->num_line_byte); -*/ -} - -static int calculate_video_dma_grab_packed(struct saa7146_dev* dev, struct saa7146_buf *buf) -{ - struct saa7146_vv *vv = dev->vv_data; - struct saa7146_video_dma vdma1; - - struct saa7146_format *sfmt = saa7146_format_by_fourcc(dev,buf->fmt->pixelformat); - - int width = buf->fmt->width; - int height = buf->fmt->height; - int bytesperline = buf->fmt->bytesperline; - enum v4l2_field field = buf->fmt->field; - - int depth = sfmt->depth; - - DEB_CAP("[size=%dx%d,fields=%s]\n", - width, height, v4l2_field_names[field]); - - if( bytesperline != 0) { - vdma1.pitch = bytesperline*2; - } else { - vdma1.pitch = (width*depth*2)/8; - } - vdma1.num_line_byte = ((vv->standard->v_field<<16) + vv->standard->h_pixels); - vdma1.base_page = buf->pt[0].dma | ME1 | sfmt->swap; - - if( 0 != vv->vflip ) { - vdma1.prot_addr = buf->pt[0].offset; - vdma1.base_even = buf->pt[0].offset+(vdma1.pitch/2)*height; - vdma1.base_odd = vdma1.base_even - (vdma1.pitch/2); - } else { - vdma1.base_even = buf->pt[0].offset; - vdma1.base_odd = vdma1.base_even + (vdma1.pitch/2); - vdma1.prot_addr = buf->pt[0].offset+(vdma1.pitch/2)*height; - } - - if (V4L2_FIELD_HAS_BOTH(field)) { - } else if (field == V4L2_FIELD_ALTERNATE) { - /* fixme */ - if ( vv->last_field == V4L2_FIELD_TOP ) { - vdma1.base_odd = vdma1.prot_addr; - vdma1.pitch /= 2; - } else if ( vv->last_field == V4L2_FIELD_BOTTOM ) { - vdma1.base_odd = vdma1.base_even; - vdma1.base_even = vdma1.prot_addr; - vdma1.pitch /= 2; - } - } else if (field == V4L2_FIELD_TOP) { - vdma1.base_odd = vdma1.prot_addr; - vdma1.pitch /= 2; - } else if (field == V4L2_FIELD_BOTTOM) { - vdma1.base_odd = vdma1.base_even; - vdma1.base_even = vdma1.prot_addr; - vdma1.pitch /= 2; - } - - if( 0 != vv->vflip ) { - vdma1.pitch *= -1; - } - - saa7146_write_out_dma(dev, 1, &vdma1); - return 0; -} - -static int calc_planar_422(struct saa7146_vv *vv, struct saa7146_buf *buf, struct saa7146_video_dma *vdma2, struct saa7146_video_dma *vdma3) -{ - int height = buf->fmt->height; - int width = buf->fmt->width; - - vdma2->pitch = width; - vdma3->pitch = width; - - /* fixme: look at bytesperline! */ - - if( 0 != vv->vflip ) { - vdma2->prot_addr = buf->pt[1].offset; - vdma2->base_even = ((vdma2->pitch/2)*height)+buf->pt[1].offset; - vdma2->base_odd = vdma2->base_even - (vdma2->pitch/2); - - vdma3->prot_addr = buf->pt[2].offset; - vdma3->base_even = ((vdma3->pitch/2)*height)+buf->pt[2].offset; - vdma3->base_odd = vdma3->base_even - (vdma3->pitch/2); - } else { - vdma3->base_even = buf->pt[2].offset; - vdma3->base_odd = vdma3->base_even + (vdma3->pitch/2); - vdma3->prot_addr = (vdma3->pitch/2)*height+buf->pt[2].offset; - - vdma2->base_even = buf->pt[1].offset; - vdma2->base_odd = vdma2->base_even + (vdma2->pitch/2); - vdma2->prot_addr = (vdma2->pitch/2)*height+buf->pt[1].offset; - } - - return 0; -} - -static int calc_planar_420(struct saa7146_vv *vv, struct saa7146_buf *buf, struct saa7146_video_dma *vdma2, struct saa7146_video_dma *vdma3) -{ - int height = buf->fmt->height; - int width = buf->fmt->width; - - vdma2->pitch = width/2; - vdma3->pitch = width/2; - - if( 0 != vv->vflip ) { - vdma2->prot_addr = buf->pt[2].offset; - vdma2->base_even = ((vdma2->pitch/2)*height)+buf->pt[2].offset; - vdma2->base_odd = vdma2->base_even - (vdma2->pitch/2); - - vdma3->prot_addr = buf->pt[1].offset; - vdma3->base_even = ((vdma3->pitch/2)*height)+buf->pt[1].offset; - vdma3->base_odd = vdma3->base_even - (vdma3->pitch/2); - - } else { - vdma3->base_even = buf->pt[2].offset; - vdma3->base_odd = vdma3->base_even + (vdma3->pitch); - vdma3->prot_addr = (vdma3->pitch/2)*height+buf->pt[2].offset; - - vdma2->base_even = buf->pt[1].offset; - vdma2->base_odd = vdma2->base_even + (vdma2->pitch); - vdma2->prot_addr = (vdma2->pitch/2)*height+buf->pt[1].offset; - } - return 0; -} - -static int calculate_video_dma_grab_planar(struct saa7146_dev* dev, struct saa7146_buf *buf) -{ - struct saa7146_vv *vv = dev->vv_data; - struct saa7146_video_dma vdma1; - struct saa7146_video_dma vdma2; - struct saa7146_video_dma vdma3; - - struct saa7146_format *sfmt = saa7146_format_by_fourcc(dev,buf->fmt->pixelformat); - - int width = buf->fmt->width; - int height = buf->fmt->height; - enum v4l2_field field = buf->fmt->field; - - BUG_ON(0 == buf->pt[0].dma); - BUG_ON(0 == buf->pt[1].dma); - BUG_ON(0 == buf->pt[2].dma); - - DEB_CAP("[size=%dx%d,fields=%s]\n", - width, height, v4l2_field_names[field]); - - /* fixme: look at bytesperline! */ - - /* fixme: what happens for user space buffers here?. The offsets are - most likely wrong, this version here only works for page-aligned - buffers, modifications to the pagetable-functions are necessary...*/ - - vdma1.pitch = width*2; - vdma1.num_line_byte = ((vv->standard->v_field<<16) + vv->standard->h_pixels); - vdma1.base_page = buf->pt[0].dma | ME1; - - if( 0 != vv->vflip ) { - vdma1.prot_addr = buf->pt[0].offset; - vdma1.base_even = ((vdma1.pitch/2)*height)+buf->pt[0].offset; - vdma1.base_odd = vdma1.base_even - (vdma1.pitch/2); - } else { - vdma1.base_even = buf->pt[0].offset; - vdma1.base_odd = vdma1.base_even + (vdma1.pitch/2); - vdma1.prot_addr = (vdma1.pitch/2)*height+buf->pt[0].offset; - } - - vdma2.num_line_byte = 0; /* unused */ - vdma2.base_page = buf->pt[1].dma | ME1; - - vdma3.num_line_byte = 0; /* unused */ - vdma3.base_page = buf->pt[2].dma | ME1; - - switch( sfmt->depth ) { - case 12: { - calc_planar_420(vv,buf,&vdma2,&vdma3); - break; - } - case 16: { - calc_planar_422(vv,buf,&vdma2,&vdma3); - break; - } - default: { - return -1; - } - } - - if (V4L2_FIELD_HAS_BOTH(field)) { - } else if (field == V4L2_FIELD_ALTERNATE) { - /* fixme */ - vdma1.base_odd = vdma1.prot_addr; - vdma1.pitch /= 2; - vdma2.base_odd = vdma2.prot_addr; - vdma2.pitch /= 2; - vdma3.base_odd = vdma3.prot_addr; - vdma3.pitch /= 2; - } else if (field == V4L2_FIELD_TOP) { - vdma1.base_odd = vdma1.prot_addr; - vdma1.pitch /= 2; - vdma2.base_odd = vdma2.prot_addr; - vdma2.pitch /= 2; - vdma3.base_odd = vdma3.prot_addr; - vdma3.pitch /= 2; - } else if (field == V4L2_FIELD_BOTTOM) { - vdma1.base_odd = vdma1.base_even; - vdma1.base_even = vdma1.prot_addr; - vdma1.pitch /= 2; - vdma2.base_odd = vdma2.base_even; - vdma2.base_even = vdma2.prot_addr; - vdma2.pitch /= 2; - vdma3.base_odd = vdma3.base_even; - vdma3.base_even = vdma3.prot_addr; - vdma3.pitch /= 2; - } - - if( 0 != vv->vflip ) { - vdma1.pitch *= -1; - vdma2.pitch *= -1; - vdma3.pitch *= -1; - } - - saa7146_write_out_dma(dev, 1, &vdma1); - if( (sfmt->flags & FORMAT_BYTE_SWAP) != 0 ) { - saa7146_write_out_dma(dev, 3, &vdma2); - saa7146_write_out_dma(dev, 2, &vdma3); - } else { - saa7146_write_out_dma(dev, 2, &vdma2); - saa7146_write_out_dma(dev, 3, &vdma3); - } - return 0; -} - -static void program_capture_engine(struct saa7146_dev *dev, int planar) -{ - struct saa7146_vv *vv = dev->vv_data; - int count = 0; - - unsigned long e_wait = vv->current_hps_sync == SAA7146_HPS_SYNC_PORT_A ? CMD_E_FID_A : CMD_E_FID_B; - unsigned long o_wait = vv->current_hps_sync == SAA7146_HPS_SYNC_PORT_A ? CMD_O_FID_A : CMD_O_FID_B; - - /* wait for o_fid_a/b / e_fid_a/b toggle only if rps register 0 is not set*/ - WRITE_RPS0(CMD_PAUSE | CMD_OAN | CMD_SIG0 | o_wait); - WRITE_RPS0(CMD_PAUSE | CMD_OAN | CMD_SIG0 | e_wait); - - /* set rps register 0 */ - WRITE_RPS0(CMD_WR_REG | (1 << 8) | (MC2/4)); - WRITE_RPS0(MASK_27 | MASK_11); - - /* turn on video-dma1 */ - WRITE_RPS0(CMD_WR_REG_MASK | (MC1/4)); - WRITE_RPS0(MASK_06 | MASK_22); /* => mask */ - WRITE_RPS0(MASK_06 | MASK_22); /* => values */ - if( 0 != planar ) { - /* turn on video-dma2 */ - WRITE_RPS0(CMD_WR_REG_MASK | (MC1/4)); - WRITE_RPS0(MASK_05 | MASK_21); /* => mask */ - WRITE_RPS0(MASK_05 | MASK_21); /* => values */ - - /* turn on video-dma3 */ - WRITE_RPS0(CMD_WR_REG_MASK | (MC1/4)); - WRITE_RPS0(MASK_04 | MASK_20); /* => mask */ - WRITE_RPS0(MASK_04 | MASK_20); /* => values */ - } - - /* wait for o_fid_a/b / e_fid_a/b toggle */ - if ( vv->last_field == V4L2_FIELD_INTERLACED ) { - WRITE_RPS0(CMD_PAUSE | o_wait); - WRITE_RPS0(CMD_PAUSE | e_wait); - } else if ( vv->last_field == V4L2_FIELD_TOP ) { - WRITE_RPS0(CMD_PAUSE | (vv->current_hps_sync == SAA7146_HPS_SYNC_PORT_A ? MASK_10 : MASK_09)); - WRITE_RPS0(CMD_PAUSE | o_wait); - } else if ( vv->last_field == V4L2_FIELD_BOTTOM ) { - WRITE_RPS0(CMD_PAUSE | (vv->current_hps_sync == SAA7146_HPS_SYNC_PORT_A ? MASK_10 : MASK_09)); - WRITE_RPS0(CMD_PAUSE | e_wait); - } - - /* turn off video-dma1 */ - WRITE_RPS0(CMD_WR_REG_MASK | (MC1/4)); - WRITE_RPS0(MASK_22 | MASK_06); /* => mask */ - WRITE_RPS0(MASK_22); /* => values */ - if( 0 != planar ) { - /* turn off video-dma2 */ - WRITE_RPS0(CMD_WR_REG_MASK | (MC1/4)); - WRITE_RPS0(MASK_05 | MASK_21); /* => mask */ - WRITE_RPS0(MASK_21); /* => values */ - - /* turn off video-dma3 */ - WRITE_RPS0(CMD_WR_REG_MASK | (MC1/4)); - WRITE_RPS0(MASK_04 | MASK_20); /* => mask */ - WRITE_RPS0(MASK_20); /* => values */ - } - - /* generate interrupt */ - WRITE_RPS0(CMD_INTERRUPT); - - /* stop */ - WRITE_RPS0(CMD_STOP); -} - -void saa7146_set_capture(struct saa7146_dev *dev, struct saa7146_buf *buf, struct saa7146_buf *next) -{ - struct saa7146_format *sfmt = saa7146_format_by_fourcc(dev,buf->fmt->pixelformat); - struct saa7146_vv *vv = dev->vv_data; - u32 vdma1_prot_addr; - - DEB_CAP("buf:%p, next:%p\n", buf, next); - - vdma1_prot_addr = saa7146_read(dev, PROT_ADDR1); - if( 0 == vdma1_prot_addr ) { - /* clear out beginning of streaming bit (rps register 0)*/ - DEB_CAP("forcing sync to new frame\n"); - saa7146_write(dev, MC2, MASK_27 ); - } - - saa7146_set_window(dev, buf->fmt->width, buf->fmt->height, buf->fmt->field); - saa7146_set_output_format(dev, sfmt->trans); - saa7146_disable_clipping(dev); - - if ( vv->last_field == V4L2_FIELD_INTERLACED ) { - } else if ( vv->last_field == V4L2_FIELD_TOP ) { - vv->last_field = V4L2_FIELD_BOTTOM; - } else if ( vv->last_field == V4L2_FIELD_BOTTOM ) { - vv->last_field = V4L2_FIELD_TOP; - } - - if( 0 != IS_PLANAR(sfmt->trans)) { - calculate_video_dma_grab_planar(dev, buf); - program_capture_engine(dev,1); - } else { - calculate_video_dma_grab_packed(dev, buf); - program_capture_engine(dev,0); - } - -/* - printk("vdma%d.base_even: 0x%08x\n", 1,saa7146_read(dev,BASE_EVEN1)); - printk("vdma%d.base_odd: 0x%08x\n", 1,saa7146_read(dev,BASE_ODD1)); - printk("vdma%d.prot_addr: 0x%08x\n", 1,saa7146_read(dev,PROT_ADDR1)); - printk("vdma%d.base_page: 0x%08x\n", 1,saa7146_read(dev,BASE_PAGE1)); - printk("vdma%d.pitch: 0x%08x\n", 1,saa7146_read(dev,PITCH1)); - printk("vdma%d.num_line_byte: 0x%08x\n", 1,saa7146_read(dev,NUM_LINE_BYTE1)); - printk("vdma%d => vptr : 0x%08x\n", 1,saa7146_read(dev,PCI_VDP1)); -*/ - - /* write the address of the rps-program */ - saa7146_write(dev, RPS_ADDR0, dev->d_rps0.dma_handle); - - /* turn on rps */ - saa7146_write(dev, MC1, (MASK_12 | MASK_28)); -} diff --git a/drivers/staging/media/deprecated/saa7146/common/saa7146_i2c.c b/drivers/staging/media/deprecated/saa7146/common/saa7146_i2c.c deleted file mode 100644 index 7a33fe51775a..000000000000 --- a/drivers/staging/media/deprecated/saa7146/common/saa7146_i2c.c +++ /dev/null @@ -1,421 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt - -#include "saa7146_vv.h" - -static u32 saa7146_i2c_func(struct i2c_adapter *adapter) -{ - /* DEB_I2C("'%s'\n", adapter->name); */ - - return I2C_FUNC_I2C - | I2C_FUNC_SMBUS_QUICK - | I2C_FUNC_SMBUS_READ_BYTE | I2C_FUNC_SMBUS_WRITE_BYTE - | I2C_FUNC_SMBUS_READ_BYTE_DATA | I2C_FUNC_SMBUS_WRITE_BYTE_DATA; -} - -/* this function returns the status-register of our i2c-device */ -static inline u32 saa7146_i2c_status(struct saa7146_dev *dev) -{ - u32 iicsta = saa7146_read(dev, I2C_STATUS); - /* DEB_I2C("status: 0x%08x\n", iicsta); */ - return iicsta; -} - -/* this function runs through the i2c-messages and prepares the data to be - sent through the saa7146. have a look at the specifications p. 122 ff - to understand this. it returns the number of u32s to send, or -1 - in case of an error. */ -static int saa7146_i2c_msg_prepare(const struct i2c_msg *m, int num, __le32 *op) -{ - int h1, h2; - int i, j, addr; - int mem = 0, op_count = 0; - - /* first determine size of needed memory */ - for(i = 0; i < num; i++) { - mem += m[i].len + 1; - } - - /* worst case: we need one u32 for three bytes to be send - plus one extra byte to address the device */ - mem = 1 + ((mem-1) / 3); - - /* we assume that op points to a memory of at least - * SAA7146_I2C_MEM bytes size. if we exceed this limit... - */ - if ((4 * mem) > SAA7146_I2C_MEM) { - /* DEB_I2C("cannot prepare i2c-message\n"); */ - return -ENOMEM; - } - - /* be careful: clear out the i2c-mem first */ - memset(op,0,sizeof(__le32)*mem); - - /* loop through all messages */ - for(i = 0; i < num; i++) { - - addr = i2c_8bit_addr_from_msg(&m[i]); - h1 = op_count/3; h2 = op_count%3; - op[h1] |= cpu_to_le32( (u8)addr << ((3-h2)*8)); - op[h1] |= cpu_to_le32(SAA7146_I2C_START << ((3-h2)*2)); - op_count++; - - /* loop through all bytes of message i */ - for(j = 0; j < m[i].len; j++) { - /* insert the data bytes */ - h1 = op_count/3; h2 = op_count%3; - op[h1] |= cpu_to_le32( (u32)((u8)m[i].buf[j]) << ((3-h2)*8)); - op[h1] |= cpu_to_le32( SAA7146_I2C_CONT << ((3-h2)*2)); - op_count++; - } - - } - - /* have a look at the last byte inserted: - if it was: ...CONT change it to ...STOP */ - h1 = (op_count-1)/3; h2 = (op_count-1)%3; - if ( SAA7146_I2C_CONT == (0x3 & (le32_to_cpu(op[h1]) >> ((3-h2)*2))) ) { - op[h1] &= ~cpu_to_le32(0x2 << ((3-h2)*2)); - op[h1] |= cpu_to_le32(SAA7146_I2C_STOP << ((3-h2)*2)); - } - - /* return the number of u32s to send */ - return mem; -} - -/* this functions loops through all i2c-messages. normally, it should determine - which bytes were read through the adapter and write them back to the corresponding - i2c-message. but instead, we simply write back all bytes. - fixme: this could be improved. */ -static int saa7146_i2c_msg_cleanup(const struct i2c_msg *m, int num, __le32 *op) -{ - int i, j; - int op_count = 0; - - /* loop through all messages */ - for(i = 0; i < num; i++) { - - op_count++; - - /* loop through all bytes of message i */ - for(j = 0; j < m[i].len; j++) { - /* write back all bytes that could have been read */ - m[i].buf[j] = (le32_to_cpu(op[op_count/3]) >> ((3-(op_count%3))*8)); - op_count++; - } - } - - return 0; -} - -/* this functions resets the i2c-device and returns 0 if everything was fine, otherwise -1 */ -static int saa7146_i2c_reset(struct saa7146_dev *dev) -{ - /* get current status */ - u32 status = saa7146_i2c_status(dev); - - /* clear registers for sure */ - saa7146_write(dev, I2C_STATUS, dev->i2c_bitrate); - saa7146_write(dev, I2C_TRANSFER, 0); - - /* check if any operation is still in progress */ - if ( 0 != ( status & SAA7146_I2C_BUSY) ) { - - /* yes, kill ongoing operation */ - DEB_I2C("busy_state detected\n"); - - /* set "ABORT-OPERATION"-bit (bit 7)*/ - saa7146_write(dev, I2C_STATUS, (dev->i2c_bitrate | MASK_07)); - saa7146_write(dev, MC2, (MASK_00 | MASK_16)); - msleep(SAA7146_I2C_DELAY); - - /* clear all error-bits pending; this is needed because p.123, note 1 */ - saa7146_write(dev, I2C_STATUS, dev->i2c_bitrate); - saa7146_write(dev, MC2, (MASK_00 | MASK_16)); - msleep(SAA7146_I2C_DELAY); - } - - /* check if any error is (still) present. (this can be necessary because p.123, note 1) */ - status = saa7146_i2c_status(dev); - - if ( dev->i2c_bitrate != status ) { - - DEB_I2C("error_state detected. status:0x%08x\n", status); - - /* Repeat the abort operation. This seems to be necessary - after serious protocol errors caused by e.g. the SAA7740 */ - saa7146_write(dev, I2C_STATUS, (dev->i2c_bitrate | MASK_07)); - saa7146_write(dev, MC2, (MASK_00 | MASK_16)); - msleep(SAA7146_I2C_DELAY); - - /* clear all error-bits pending */ - saa7146_write(dev, I2C_STATUS, dev->i2c_bitrate); - saa7146_write(dev, MC2, (MASK_00 | MASK_16)); - msleep(SAA7146_I2C_DELAY); - - /* the data sheet says it might be necessary to clear the status - twice after an abort */ - saa7146_write(dev, I2C_STATUS, dev->i2c_bitrate); - saa7146_write(dev, MC2, (MASK_00 | MASK_16)); - msleep(SAA7146_I2C_DELAY); - } - - /* if any error is still present, a fatal error has occurred ... */ - status = saa7146_i2c_status(dev); - if ( dev->i2c_bitrate != status ) { - DEB_I2C("fatal error. status:0x%08x\n", status); - return -1; - } - - return 0; -} - -/* this functions writes out the data-byte 'dword' to the i2c-device. - it returns 0 if ok, -1 if the transfer failed, -2 if the transfer - failed badly (e.g. address error) */ -static int saa7146_i2c_writeout(struct saa7146_dev *dev, __le32 *dword, int short_delay) -{ - u32 status = 0, mc2 = 0; - int trial = 0; - unsigned long timeout; - - /* write out i2c-command */ - DEB_I2C("before: 0x%08x (status: 0x%08x), %d\n", - *dword, saa7146_read(dev, I2C_STATUS), dev->i2c_op); - - if( 0 != (SAA7146_USE_I2C_IRQ & dev->ext->flags)) { - - saa7146_write(dev, I2C_STATUS, dev->i2c_bitrate); - saa7146_write(dev, I2C_TRANSFER, le32_to_cpu(*dword)); - - dev->i2c_op = 1; - SAA7146_ISR_CLEAR(dev, MASK_16|MASK_17); - SAA7146_IER_ENABLE(dev, MASK_16|MASK_17); - saa7146_write(dev, MC2, (MASK_00 | MASK_16)); - - timeout = HZ/100 + 1; /* 10ms */ - timeout = wait_event_interruptible_timeout(dev->i2c_wq, dev->i2c_op == 0, timeout); - if (timeout == -ERESTARTSYS || dev->i2c_op) { - SAA7146_IER_DISABLE(dev, MASK_16|MASK_17); - SAA7146_ISR_CLEAR(dev, MASK_16|MASK_17); - if (timeout == -ERESTARTSYS) - /* a signal arrived */ - return -ERESTARTSYS; - - pr_warn("%s %s [irq]: timed out waiting for end of xfer\n", - dev->name, __func__); - return -EIO; - } - status = saa7146_read(dev, I2C_STATUS); - } else { - saa7146_write(dev, I2C_STATUS, dev->i2c_bitrate); - saa7146_write(dev, I2C_TRANSFER, le32_to_cpu(*dword)); - saa7146_write(dev, MC2, (MASK_00 | MASK_16)); - - /* do not poll for i2c-status before upload is complete */ - timeout = jiffies + HZ/100 + 1; /* 10ms */ - while(1) { - mc2 = (saa7146_read(dev, MC2) & 0x1); - if( 0 != mc2 ) { - break; - } - if (time_after(jiffies,timeout)) { - pr_warn("%s %s: timed out waiting for MC2\n", - dev->name, __func__); - return -EIO; - } - } - /* wait until we get a transfer done or error */ - timeout = jiffies + HZ/100 + 1; /* 10ms */ - /* first read usually delivers bogus results... */ - saa7146_i2c_status(dev); - while(1) { - status = saa7146_i2c_status(dev); - if ((status & 0x3) != 1) - break; - if (time_after(jiffies,timeout)) { - /* this is normal when probing the bus - * (no answer from nonexisistant device...) - */ - pr_warn("%s %s [poll]: timed out waiting for end of xfer\n", - dev->name, __func__); - return -EIO; - } - if (++trial < 50 && short_delay) - udelay(10); - else - msleep(1); - } - } - - /* give a detailed status report */ - if ( 0 != (status & (SAA7146_I2C_SPERR | SAA7146_I2C_APERR | - SAA7146_I2C_DTERR | SAA7146_I2C_DRERR | - SAA7146_I2C_AL | SAA7146_I2C_ERR | - SAA7146_I2C_BUSY)) ) { - - if ( 0 == (status & SAA7146_I2C_ERR) || - 0 == (status & SAA7146_I2C_BUSY) ) { - /* it may take some time until ERR goes high - ignore */ - DEB_I2C("unexpected i2c status %04x\n", status); - } - if( 0 != (status & SAA7146_I2C_SPERR) ) { - DEB_I2C("error due to invalid start/stop condition\n"); - } - if( 0 != (status & SAA7146_I2C_DTERR) ) { - DEB_I2C("error in data transmission\n"); - } - if( 0 != (status & SAA7146_I2C_DRERR) ) { - DEB_I2C("error when receiving data\n"); - } - if( 0 != (status & SAA7146_I2C_AL) ) { - DEB_I2C("error because arbitration lost\n"); - } - - /* we handle address-errors here */ - if( 0 != (status & SAA7146_I2C_APERR) ) { - DEB_I2C("error in address phase\n"); - return -EREMOTEIO; - } - - return -EIO; - } - - /* read back data, just in case we were reading ... */ - *dword = cpu_to_le32(saa7146_read(dev, I2C_TRANSFER)); - - DEB_I2C("after: 0x%08x\n", *dword); - return 0; -} - -static int saa7146_i2c_transfer(struct saa7146_dev *dev, const struct i2c_msg *msgs, int num, int retries) -{ - int i = 0, count = 0; - __le32 *buffer = dev->d_i2c.cpu_addr; - int err = 0; - int short_delay = 0; - - if (mutex_lock_interruptible(&dev->i2c_lock)) - return -ERESTARTSYS; - - for(i=0;i count ) { - err = -EIO; - goto out; - } - - if ( count > 3 || 0 != (SAA7146_I2C_SHORT_DELAY & dev->ext->flags) ) - short_delay = 1; - - do { - /* reset the i2c-device if necessary */ - err = saa7146_i2c_reset(dev); - if ( 0 > err ) { - DEB_I2C("could not reset i2c-device\n"); - goto out; - } - - /* write out the u32s one after another */ - for(i = 0; i < count; i++) { - err = saa7146_i2c_writeout(dev, &buffer[i], short_delay); - if ( 0 != err) { - /* this one is unsatisfying: some i2c slaves on some - dvb cards don't acknowledge correctly, so the saa7146 - thinks that an address error occurred. in that case, the - transaction should be retrying, even if an address error - occurred. analog saa7146 based cards extensively rely on - i2c address probing, however, and address errors indicate that a - device is really *not* there. retrying in that case - increases the time the device needs to probe greatly, so - it should be avoided. So we bail out in irq mode after an - address error and trust the saa7146 address error detection. */ - if (-EREMOTEIO == err && 0 != (SAA7146_USE_I2C_IRQ & dev->ext->flags)) - goto out; - DEB_I2C("error while sending message(s). starting again\n"); - break; - } - } - if( 0 == err ) { - err = num; - break; - } - - /* delay a bit before retrying */ - msleep(10); - - } while (err != num && retries--); - - /* quit if any error occurred */ - if (err != num) - goto out; - - /* if any things had to be read, get the results */ - if ( 0 != saa7146_i2c_msg_cleanup(msgs, num, buffer)) { - DEB_I2C("could not cleanup i2c-message\n"); - err = -EIO; - goto out; - } - - /* return the number of delivered messages */ - DEB_I2C("transmission successful. (msg:%d)\n", err); -out: - /* another bug in revision 0: the i2c-registers get uploaded randomly by other - uploads, so we better clear them out before continuing */ - if( 0 == dev->revision ) { - __le32 zero = 0; - saa7146_i2c_reset(dev); - if( 0 != saa7146_i2c_writeout(dev, &zero, short_delay)) { - pr_info("revision 0 error. this should never happen\n"); - } - } - - mutex_unlock(&dev->i2c_lock); - return err; -} - -/* utility functions */ -static int saa7146_i2c_xfer(struct i2c_adapter* adapter, struct i2c_msg *msg, int num) -{ - struct v4l2_device *v4l2_dev = i2c_get_adapdata(adapter); - struct saa7146_dev *dev = to_saa7146_dev(v4l2_dev); - - /* use helper function to transfer data */ - return saa7146_i2c_transfer(dev, msg, num, adapter->retries); -} - - -/*****************************************************************************/ -/* i2c-adapter helper functions */ - -/* exported algorithm data */ -static const struct i2c_algorithm saa7146_algo = { - .master_xfer = saa7146_i2c_xfer, - .functionality = saa7146_i2c_func, -}; - -int saa7146_i2c_adapter_prepare(struct saa7146_dev *dev, struct i2c_adapter *i2c_adapter, u32 bitrate) -{ - DEB_EE("bitrate: 0x%08x\n", bitrate); - - /* enable i2c-port pins */ - saa7146_write(dev, MC1, (MASK_08 | MASK_24)); - - dev->i2c_bitrate = bitrate; - saa7146_i2c_reset(dev); - - if (i2c_adapter) { - i2c_set_adapdata(i2c_adapter, &dev->v4l2_dev); - i2c_adapter->dev.parent = &dev->pci->dev; - i2c_adapter->algo = &saa7146_algo; - i2c_adapter->algo_data = NULL; - i2c_adapter->timeout = SAA7146_I2C_TIMEOUT; - i2c_adapter->retries = SAA7146_I2C_RETRIES; - } - - return 0; -} diff --git a/drivers/staging/media/deprecated/saa7146/common/saa7146_vbi.c b/drivers/staging/media/deprecated/saa7146/common/saa7146_vbi.c deleted file mode 100644 index 2d4a05d7bc5b..000000000000 --- a/drivers/staging/media/deprecated/saa7146/common/saa7146_vbi.c +++ /dev/null @@ -1,498 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -#include "saa7146_vv.h" - -static int vbi_pixel_to_capture = 720 * 2; - -static int vbi_workaround(struct saa7146_dev *dev) -{ - struct saa7146_vv *vv = dev->vv_data; - - u32 *cpu; - dma_addr_t dma_addr; - - int count = 0; - int i; - - DECLARE_WAITQUEUE(wait, current); - - DEB_VBI("dev:%p\n", dev); - - /* once again, a bug in the saa7146: the brs acquisition - is buggy and especially the BXO-counter does not work - as specified. there is this workaround, but please - don't let me explain it. ;-) */ - - cpu = dma_alloc_coherent(&dev->pci->dev, 4096, &dma_addr, GFP_KERNEL); - if (NULL == cpu) - return -ENOMEM; - - /* setup some basic programming, just for the workaround */ - saa7146_write(dev, BASE_EVEN3, dma_addr); - saa7146_write(dev, BASE_ODD3, dma_addr+vbi_pixel_to_capture); - saa7146_write(dev, PROT_ADDR3, dma_addr+4096); - saa7146_write(dev, PITCH3, vbi_pixel_to_capture); - saa7146_write(dev, BASE_PAGE3, 0x0); - saa7146_write(dev, NUM_LINE_BYTE3, (2<<16)|((vbi_pixel_to_capture)<<0)); - saa7146_write(dev, MC2, MASK_04|MASK_20); - - /* load brs-control register */ - WRITE_RPS1(CMD_WR_REG | (1 << 8) | (BRS_CTRL/4)); - /* BXO = 1h, BRS to outbound */ - WRITE_RPS1(0xc000008c); - /* wait for vbi_a or vbi_b*/ - if ( 0 != (SAA7146_USE_PORT_B_FOR_VBI & dev->ext_vv_data->flags)) { - DEB_D("...using port b\n"); - WRITE_RPS1(CMD_PAUSE | CMD_OAN | CMD_SIG1 | CMD_E_FID_B); - WRITE_RPS1(CMD_PAUSE | CMD_OAN | CMD_SIG1 | CMD_O_FID_B); -/* - WRITE_RPS1(CMD_PAUSE | MASK_09); -*/ - } else { - DEB_D("...using port a\n"); - WRITE_RPS1(CMD_PAUSE | MASK_10); - } - /* upload brs */ - WRITE_RPS1(CMD_UPLOAD | MASK_08); - /* load brs-control register */ - WRITE_RPS1(CMD_WR_REG | (1 << 8) | (BRS_CTRL/4)); - /* BYO = 1, BXO = NQBIL (=1728 for PAL, for NTSC this is 858*2) - NumByte3 (=1440) = 288 */ - WRITE_RPS1(((1728-(vbi_pixel_to_capture)) << 7) | MASK_19); - /* wait for brs_done */ - WRITE_RPS1(CMD_PAUSE | MASK_08); - /* upload brs */ - WRITE_RPS1(CMD_UPLOAD | MASK_08); - /* load video-dma3 NumLines3 and NumBytes3 */ - WRITE_RPS1(CMD_WR_REG | (1 << 8) | (NUM_LINE_BYTE3/4)); - /* dev->vbi_count*2 lines, 720 pixel (= 1440 Bytes) */ - WRITE_RPS1((2 << 16) | (vbi_pixel_to_capture)); - /* load brs-control register */ - WRITE_RPS1(CMD_WR_REG | (1 << 8) | (BRS_CTRL/4)); - /* Set BRS right: note: this is an experimental value for BXO (=> PAL!) */ - WRITE_RPS1((540 << 7) | (5 << 19)); // 5 == vbi_start - /* wait for brs_done */ - WRITE_RPS1(CMD_PAUSE | MASK_08); - /* upload brs and video-dma3*/ - WRITE_RPS1(CMD_UPLOAD | MASK_08 | MASK_04); - /* load mc2 register: enable dma3 */ - WRITE_RPS1(CMD_WR_REG | (1 << 8) | (MC1/4)); - WRITE_RPS1(MASK_20 | MASK_04); - /* generate interrupt */ - WRITE_RPS1(CMD_INTERRUPT); - /* stop rps1 */ - WRITE_RPS1(CMD_STOP); - - /* we have to do the workaround twice to be sure that - everything is ok */ - for(i = 0; i < 2; i++) { - - /* indicate to the irq handler that we do the workaround */ - saa7146_write(dev, MC2, MASK_31|MASK_15); - - saa7146_write(dev, NUM_LINE_BYTE3, (1<<16)|(2<<0)); - saa7146_write(dev, MC2, MASK_04|MASK_20); - - /* enable rps1 irqs */ - SAA7146_IER_ENABLE(dev,MASK_28); - - /* prepare to wait to be woken up by the irq-handler */ - add_wait_queue(&vv->vbi_wq, &wait); - set_current_state(TASK_INTERRUPTIBLE); - - /* start rps1 to enable workaround */ - saa7146_write(dev, RPS_ADDR1, dev->d_rps1.dma_handle); - saa7146_write(dev, MC1, (MASK_13 | MASK_29)); - - schedule(); - - DEB_VBI("brs bug workaround %d/1\n", i); - - remove_wait_queue(&vv->vbi_wq, &wait); - __set_current_state(TASK_RUNNING); - - /* disable rps1 irqs */ - SAA7146_IER_DISABLE(dev,MASK_28); - - /* stop video-dma3 */ - saa7146_write(dev, MC1, MASK_20); - - if(signal_pending(current)) { - - DEB_VBI("aborted (rps:0x%08x)\n", - saa7146_read(dev, RPS_ADDR1)); - - /* stop rps1 for sure */ - saa7146_write(dev, MC1, MASK_29); - - dma_free_coherent(&dev->pci->dev, 4096, cpu, dma_addr); - return -EINTR; - } - } - - dma_free_coherent(&dev->pci->dev, 4096, cpu, dma_addr); - return 0; -} - -static void saa7146_set_vbi_capture(struct saa7146_dev *dev, struct saa7146_buf *buf, struct saa7146_buf *next) -{ - struct saa7146_vv *vv = dev->vv_data; - - struct saa7146_video_dma vdma3; - - int count = 0; - unsigned long e_wait = vv->current_hps_sync == SAA7146_HPS_SYNC_PORT_A ? CMD_E_FID_A : CMD_E_FID_B; - unsigned long o_wait = vv->current_hps_sync == SAA7146_HPS_SYNC_PORT_A ? CMD_O_FID_A : CMD_O_FID_B; - -/* - vdma3.base_even = 0xc8000000+2560*70; - vdma3.base_odd = 0xc8000000; - vdma3.prot_addr = 0xc8000000+2560*164; - vdma3.pitch = 2560; - vdma3.base_page = 0; - vdma3.num_line_byte = (64<<16)|((vbi_pixel_to_capture)<<0); // set above! -*/ - vdma3.base_even = buf->pt[2].offset; - vdma3.base_odd = buf->pt[2].offset + 16 * vbi_pixel_to_capture; - vdma3.prot_addr = buf->pt[2].offset + 16 * 2 * vbi_pixel_to_capture; - vdma3.pitch = vbi_pixel_to_capture; - vdma3.base_page = buf->pt[2].dma | ME1; - vdma3.num_line_byte = (16 << 16) | vbi_pixel_to_capture; - - saa7146_write_out_dma(dev, 3, &vdma3); - - /* write beginning of rps-program */ - count = 0; - - /* wait for o_fid_a/b / e_fid_a/b toggle only if bit 1 is not set */ - - /* we don't wait here for the first field anymore. this is different from the video - capture and might cause that the first buffer is only half filled (with only - one field). but since this is some sort of streaming data, this is not that negative. - but by doing this, we can use the whole engine from videobuf-dma-sg.c... */ - -/* - WRITE_RPS1(CMD_PAUSE | CMD_OAN | CMD_SIG1 | e_wait); - WRITE_RPS1(CMD_PAUSE | CMD_OAN | CMD_SIG1 | o_wait); -*/ - /* set bit 1 */ - WRITE_RPS1(CMD_WR_REG | (1 << 8) | (MC2/4)); - WRITE_RPS1(MASK_28 | MASK_12); - - /* turn on video-dma3 */ - WRITE_RPS1(CMD_WR_REG_MASK | (MC1/4)); - WRITE_RPS1(MASK_04 | MASK_20); /* => mask */ - WRITE_RPS1(MASK_04 | MASK_20); /* => values */ - - /* wait for o_fid_a/b / e_fid_a/b toggle */ - WRITE_RPS1(CMD_PAUSE | o_wait); - WRITE_RPS1(CMD_PAUSE | e_wait); - - /* generate interrupt */ - WRITE_RPS1(CMD_INTERRUPT); - - /* stop */ - WRITE_RPS1(CMD_STOP); - - /* enable rps1 irqs */ - SAA7146_IER_ENABLE(dev, MASK_28); - - /* write the address of the rps-program */ - saa7146_write(dev, RPS_ADDR1, dev->d_rps1.dma_handle); - - /* turn on rps */ - saa7146_write(dev, MC1, (MASK_13 | MASK_29)); -} - -static int buffer_activate(struct saa7146_dev *dev, - struct saa7146_buf *buf, - struct saa7146_buf *next) -{ - struct saa7146_vv *vv = dev->vv_data; - buf->vb.state = VIDEOBUF_ACTIVE; - - DEB_VBI("dev:%p, buf:%p, next:%p\n", dev, buf, next); - saa7146_set_vbi_capture(dev,buf,next); - - mod_timer(&vv->vbi_dmaq.timeout, jiffies+BUFFER_TIMEOUT); - return 0; -} - -static int buffer_prepare(struct videobuf_queue *q, struct videobuf_buffer *vb,enum v4l2_field field) -{ - struct file *file = q->priv_data; - struct saa7146_fh *fh = file->private_data; - struct saa7146_dev *dev = fh->dev; - struct saa7146_buf *buf = (struct saa7146_buf *)vb; - - int err = 0; - int lines, llength, size; - - lines = 16 * 2 ; /* 2 fields */ - llength = vbi_pixel_to_capture; - size = lines * llength; - - DEB_VBI("vb:%p\n", vb); - - if (0 != buf->vb.baddr && buf->vb.bsize < size) { - DEB_VBI("size mismatch\n"); - return -EINVAL; - } - - if (buf->vb.size != size) - saa7146_dma_free(dev,q,buf); - - if (VIDEOBUF_NEEDS_INIT == buf->vb.state) { - struct videobuf_dmabuf *dma=videobuf_to_dma(&buf->vb); - - buf->vb.width = llength; - buf->vb.height = lines; - buf->vb.size = size; - buf->vb.field = field; // FIXME: check this - - saa7146_pgtable_free(dev->pci, &buf->pt[2]); - saa7146_pgtable_alloc(dev->pci, &buf->pt[2]); - - err = videobuf_iolock(q,&buf->vb, NULL); - if (err) - goto oops; - err = saa7146_pgtable_build_single(dev->pci, &buf->pt[2], - dma->sglist, dma->sglen); - if (0 != err) - return err; - } - buf->vb.state = VIDEOBUF_PREPARED; - buf->activate = buffer_activate; - - return 0; - - oops: - DEB_VBI("error out\n"); - saa7146_dma_free(dev,q,buf); - - return err; -} - -static int buffer_setup(struct videobuf_queue *q, unsigned int *count, unsigned int *size) -{ - int llength,lines; - - lines = 16 * 2 ; /* 2 fields */ - llength = vbi_pixel_to_capture; - - *size = lines * llength; - *count = 2; - - DEB_VBI("count:%d, size:%d\n", *count, *size); - - return 0; -} - -static void buffer_queue(struct videobuf_queue *q, struct videobuf_buffer *vb) -{ - struct file *file = q->priv_data; - struct saa7146_fh *fh = file->private_data; - struct saa7146_dev *dev = fh->dev; - struct saa7146_vv *vv = dev->vv_data; - struct saa7146_buf *buf = (struct saa7146_buf *)vb; - - DEB_VBI("vb:%p\n", vb); - saa7146_buffer_queue(dev, &vv->vbi_dmaq, buf); -} - -static void buffer_release(struct videobuf_queue *q, struct videobuf_buffer *vb) -{ - struct file *file = q->priv_data; - struct saa7146_fh *fh = file->private_data; - struct saa7146_dev *dev = fh->dev; - struct saa7146_buf *buf = (struct saa7146_buf *)vb; - - DEB_VBI("vb:%p\n", vb); - saa7146_dma_free(dev,q,buf); -} - -static const struct videobuf_queue_ops vbi_qops = { - .buf_setup = buffer_setup, - .buf_prepare = buffer_prepare, - .buf_queue = buffer_queue, - .buf_release = buffer_release, -}; - -/* ------------------------------------------------------------------ */ - -static void vbi_stop(struct saa7146_fh *fh, struct file *file) -{ - struct saa7146_dev *dev = fh->dev; - struct saa7146_vv *vv = dev->vv_data; - unsigned long flags; - DEB_VBI("dev:%p, fh:%p\n", dev, fh); - - spin_lock_irqsave(&dev->slock,flags); - - /* disable rps1 */ - saa7146_write(dev, MC1, MASK_29); - - /* disable rps1 irqs */ - SAA7146_IER_DISABLE(dev, MASK_28); - - /* shut down dma 3 transfers */ - saa7146_write(dev, MC1, MASK_20); - - if (vv->vbi_dmaq.curr) - saa7146_buffer_finish(dev, &vv->vbi_dmaq, VIDEOBUF_DONE); - - videobuf_queue_cancel(&fh->vbi_q); - - vv->vbi_streaming = NULL; - - del_timer(&vv->vbi_dmaq.timeout); - del_timer(&vv->vbi_read_timeout); - - spin_unlock_irqrestore(&dev->slock, flags); -} - -static void vbi_read_timeout(struct timer_list *t) -{ - struct saa7146_vv *vv = from_timer(vv, t, vbi_read_timeout); - struct file *file = vv->vbi_read_timeout_file; - struct saa7146_fh *fh = file->private_data; - struct saa7146_dev *dev = fh->dev; - - DEB_VBI("dev:%p, fh:%p\n", dev, fh); - - vbi_stop(fh, file); -} - -static void vbi_init(struct saa7146_dev *dev, struct saa7146_vv *vv) -{ - DEB_VBI("dev:%p\n", dev); - - INIT_LIST_HEAD(&vv->vbi_dmaq.queue); - - timer_setup(&vv->vbi_dmaq.timeout, saa7146_buffer_timeout, 0); - vv->vbi_dmaq.dev = dev; - - init_waitqueue_head(&vv->vbi_wq); -} - -static int vbi_open(struct saa7146_dev *dev, struct file *file) -{ - struct saa7146_fh *fh = file->private_data; - struct saa7146_vv *vv = fh->dev->vv_data; - - u32 arbtr_ctrl = saa7146_read(dev, PCI_BT_V1); - int ret = 0; - - DEB_VBI("dev:%p, fh:%p\n", dev, fh); - - ret = saa7146_res_get(fh, RESOURCE_DMA3_BRS); - if (0 == ret) { - DEB_S("cannot get vbi RESOURCE_DMA3_BRS resource\n"); - return -EBUSY; - } - - /* adjust arbitrition control for video dma 3 */ - arbtr_ctrl &= ~0x1f0000; - arbtr_ctrl |= 0x1d0000; - saa7146_write(dev, PCI_BT_V1, arbtr_ctrl); - saa7146_write(dev, MC2, (MASK_04|MASK_20)); - - videobuf_queue_sg_init(&fh->vbi_q, &vbi_qops, - &dev->pci->dev, &dev->slock, - V4L2_BUF_TYPE_VBI_CAPTURE, - V4L2_FIELD_SEQ_TB, // FIXME: does this really work? - sizeof(struct saa7146_buf), - file, &dev->v4l2_lock); - - vv->vbi_read_timeout.function = vbi_read_timeout; - vv->vbi_read_timeout_file = file; - - /* initialize the brs */ - if ( 0 != (SAA7146_USE_PORT_B_FOR_VBI & dev->ext_vv_data->flags)) { - saa7146_write(dev, BRS_CTRL, MASK_30|MASK_29 | (7 << 19)); - } else { - saa7146_write(dev, BRS_CTRL, 0x00000001); - - if (0 != (ret = vbi_workaround(dev))) { - DEB_VBI("vbi workaround failed!\n"); - /* return ret;*/ - } - } - - /* upload brs register */ - saa7146_write(dev, MC2, (MASK_08|MASK_24)); - return 0; -} - -static void vbi_close(struct saa7146_dev *dev, struct file *file) -{ - struct saa7146_fh *fh = file->private_data; - struct saa7146_vv *vv = dev->vv_data; - DEB_VBI("dev:%p, fh:%p\n", dev, fh); - - if( fh == vv->vbi_streaming ) { - vbi_stop(fh, file); - } - saa7146_res_free(fh, RESOURCE_DMA3_BRS); -} - -static void vbi_irq_done(struct saa7146_dev *dev, unsigned long status) -{ - struct saa7146_vv *vv = dev->vv_data; - spin_lock(&dev->slock); - - if (vv->vbi_dmaq.curr) { - DEB_VBI("dev:%p, curr:%p\n", dev, vv->vbi_dmaq.curr); - /* this must be += 2, one count for each field */ - vv->vbi_fieldcount+=2; - vv->vbi_dmaq.curr->vb.field_count = vv->vbi_fieldcount; - saa7146_buffer_finish(dev, &vv->vbi_dmaq, VIDEOBUF_DONE); - } else { - DEB_VBI("dev:%p\n", dev); - } - saa7146_buffer_next(dev, &vv->vbi_dmaq, 1); - - spin_unlock(&dev->slock); -} - -static ssize_t vbi_read(struct file *file, char __user *data, size_t count, loff_t *ppos) -{ - struct saa7146_fh *fh = file->private_data; - struct saa7146_dev *dev = fh->dev; - struct saa7146_vv *vv = dev->vv_data; - ssize_t ret = 0; - - DEB_VBI("dev:%p, fh:%p\n", dev, fh); - - if( NULL == vv->vbi_streaming ) { - // fixme: check if dma3 is available - // fixme: activate vbi engine here if necessary. (really?) - vv->vbi_streaming = fh; - } - - if( fh != vv->vbi_streaming ) { - DEB_VBI("open %p is already using vbi capture\n", - vv->vbi_streaming); - return -EBUSY; - } - - mod_timer(&vv->vbi_read_timeout, jiffies+BUFFER_TIMEOUT); - ret = videobuf_read_stream(&fh->vbi_q, data, count, ppos, 1, - file->f_flags & O_NONBLOCK); -/* - printk("BASE_ODD3: 0x%08x\n", saa7146_read(dev, BASE_ODD3)); - printk("BASE_EVEN3: 0x%08x\n", saa7146_read(dev, BASE_EVEN3)); - printk("PROT_ADDR3: 0x%08x\n", saa7146_read(dev, PROT_ADDR3)); - printk("PITCH3: 0x%08x\n", saa7146_read(dev, PITCH3)); - printk("BASE_PAGE3: 0x%08x\n", saa7146_read(dev, BASE_PAGE3)); - printk("NUM_LINE_BYTE3: 0x%08x\n", saa7146_read(dev, NUM_LINE_BYTE3)); - printk("BRS_CTRL: 0x%08x\n", saa7146_read(dev, BRS_CTRL)); -*/ - return ret; -} - -const struct saa7146_use_ops saa7146_vbi_uops = { - .init = vbi_init, - .open = vbi_open, - .release = vbi_close, - .irq_done = vbi_irq_done, - .read = vbi_read, -}; diff --git a/drivers/staging/media/deprecated/saa7146/common/saa7146_video.c b/drivers/staging/media/deprecated/saa7146/common/saa7146_video.c deleted file mode 100644 index 4598a44231fa..000000000000 --- a/drivers/staging/media/deprecated/saa7146/common/saa7146_video.c +++ /dev/null @@ -1,1286 +0,0 @@ -#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt - -#include -#include -#include -#include -#include "saa7146_vv.h" - -static int max_memory = 32; - -module_param(max_memory, int, 0644); -MODULE_PARM_DESC(max_memory, "maximum memory usage for capture buffers (default: 32Mb)"); - -#define IS_CAPTURE_ACTIVE(fh) \ - (((vv->video_status & STATUS_CAPTURE) != 0) && (vv->video_fh == fh)) - -#define IS_OVERLAY_ACTIVE(fh) \ - (((vv->video_status & STATUS_OVERLAY) != 0) && (vv->video_fh == fh)) - -/* format descriptions for capture and preview */ -static struct saa7146_format formats[] = { - { - .pixelformat = V4L2_PIX_FMT_RGB332, - .trans = RGB08_COMPOSED, - .depth = 8, - .flags = 0, - }, { - .pixelformat = V4L2_PIX_FMT_RGB565, - .trans = RGB16_COMPOSED, - .depth = 16, - .flags = 0, - }, { - .pixelformat = V4L2_PIX_FMT_BGR24, - .trans = RGB24_COMPOSED, - .depth = 24, - .flags = 0, - }, { - .pixelformat = V4L2_PIX_FMT_BGR32, - .trans = RGB32_COMPOSED, - .depth = 32, - .flags = 0, - }, { - .pixelformat = V4L2_PIX_FMT_RGB32, - .trans = RGB32_COMPOSED, - .depth = 32, - .flags = 0, - .swap = 0x2, - }, { - .pixelformat = V4L2_PIX_FMT_GREY, - .trans = Y8, - .depth = 8, - .flags = 0, - }, { - .pixelformat = V4L2_PIX_FMT_YUV422P, - .trans = YUV422_DECOMPOSED, - .depth = 16, - .flags = FORMAT_BYTE_SWAP|FORMAT_IS_PLANAR, - }, { - .pixelformat = V4L2_PIX_FMT_YVU420, - .trans = YUV420_DECOMPOSED, - .depth = 12, - .flags = FORMAT_BYTE_SWAP|FORMAT_IS_PLANAR, - }, { - .pixelformat = V4L2_PIX_FMT_YUV420, - .trans = YUV420_DECOMPOSED, - .depth = 12, - .flags = FORMAT_IS_PLANAR, - }, { - .pixelformat = V4L2_PIX_FMT_UYVY, - .trans = YUV422_COMPOSED, - .depth = 16, - .flags = 0, - } -}; - -/* unfortunately, the saa7146 contains a bug which prevents it from doing on-the-fly byte swaps. - due to this, it's impossible to provide additional *packed* formats, which are simply byte swapped - (like V4L2_PIX_FMT_YUYV) ... 8-( */ - -struct saa7146_format* saa7146_format_by_fourcc(struct saa7146_dev *dev, int fourcc) -{ - int i; - - for (i = 0; i < ARRAY_SIZE(formats); i++) { - if (formats[i].pixelformat == fourcc) { - return formats+i; - } - } - - DEB_D("unknown pixelformat:'%4.4s'\n", (char *)&fourcc); - return NULL; -} - -static int vidioc_try_fmt_vid_overlay(struct file *file, void *fh, struct v4l2_format *f); - -int saa7146_start_preview(struct saa7146_fh *fh) -{ - struct saa7146_dev *dev = fh->dev; - struct saa7146_vv *vv = dev->vv_data; - struct v4l2_format fmt; - int ret = 0, err = 0; - - DEB_EE("dev:%p, fh:%p\n", dev, fh); - - /* check if we have overlay information */ - if (vv->ov.fh == NULL) { - DEB_D("no overlay data available. try S_FMT first.\n"); - return -EAGAIN; - } - - /* check if streaming capture is running */ - if (IS_CAPTURE_ACTIVE(fh) != 0) { - DEB_D("streaming capture is active\n"); - return -EBUSY; - } - - /* check if overlay is running */ - if (IS_OVERLAY_ACTIVE(fh) != 0) { - if (vv->video_fh == fh) { - DEB_D("overlay is already active\n"); - return 0; - } - DEB_D("overlay is already active in another open\n"); - return -EBUSY; - } - - if (0 == saa7146_res_get(fh, RESOURCE_DMA1_HPS|RESOURCE_DMA2_CLP)) { - DEB_D("cannot get necessary overlay resources\n"); - return -EBUSY; - } - - fmt.fmt.win = vv->ov.win; - err = vidioc_try_fmt_vid_overlay(NULL, fh, &fmt); - if (0 != err) { - saa7146_res_free(vv->video_fh, RESOURCE_DMA1_HPS|RESOURCE_DMA2_CLP); - return -EBUSY; - } - vv->ov.win = fmt.fmt.win; - - DEB_D("%dx%d+%d+%d 0x%08x field=%s\n", - vv->ov.win.w.width, vv->ov.win.w.height, - vv->ov.win.w.left, vv->ov.win.w.top, - vv->ov_fmt->pixelformat, v4l2_field_names[vv->ov.win.field]); - - if (0 != (ret = saa7146_enable_overlay(fh))) { - DEB_D("enabling overlay failed: %d\n", ret); - saa7146_res_free(vv->video_fh, RESOURCE_DMA1_HPS|RESOURCE_DMA2_CLP); - return ret; - } - - vv->video_status = STATUS_OVERLAY; - vv->video_fh = fh; - - return 0; -} -EXPORT_SYMBOL_GPL(saa7146_start_preview); - -int saa7146_stop_preview(struct saa7146_fh *fh) -{ - struct saa7146_dev *dev = fh->dev; - struct saa7146_vv *vv = dev->vv_data; - - DEB_EE("dev:%p, fh:%p\n", dev, fh); - - /* check if streaming capture is running */ - if (IS_CAPTURE_ACTIVE(fh) != 0) { - DEB_D("streaming capture is active\n"); - return -EBUSY; - } - - /* check if overlay is running at all */ - if ((vv->video_status & STATUS_OVERLAY) == 0) { - DEB_D("no active overlay\n"); - return 0; - } - - if (vv->video_fh != fh) { - DEB_D("overlay is active, but in another open\n"); - return -EBUSY; - } - - vv->video_status = 0; - vv->video_fh = NULL; - - saa7146_disable_overlay(fh); - - saa7146_res_free(fh, RESOURCE_DMA1_HPS|RESOURCE_DMA2_CLP); - - return 0; -} -EXPORT_SYMBOL_GPL(saa7146_stop_preview); - -/********************************************************************************/ -/* common pagetable functions */ - -static int saa7146_pgtable_build(struct saa7146_dev *dev, struct saa7146_buf *buf) -{ - struct pci_dev *pci = dev->pci; - struct videobuf_dmabuf *dma=videobuf_to_dma(&buf->vb); - struct scatterlist *list = dma->sglist; - int length = dma->sglen; - struct saa7146_format *sfmt = saa7146_format_by_fourcc(dev,buf->fmt->pixelformat); - - DEB_EE("dev:%p, buf:%p, sg_len:%d\n", dev, buf, length); - - if( 0 != IS_PLANAR(sfmt->trans)) { - struct saa7146_pgtable *pt1 = &buf->pt[0]; - struct saa7146_pgtable *pt2 = &buf->pt[1]; - struct saa7146_pgtable *pt3 = &buf->pt[2]; - __le32 *ptr1, *ptr2, *ptr3; - __le32 fill; - - int size = buf->fmt->width*buf->fmt->height; - int i,p,m1,m2,m3,o1,o2; - - switch( sfmt->depth ) { - case 12: { - /* create some offsets inside the page table */ - m1 = ((size+PAGE_SIZE)/PAGE_SIZE)-1; - m2 = ((size+(size/4)+PAGE_SIZE)/PAGE_SIZE)-1; - m3 = ((size+(size/2)+PAGE_SIZE)/PAGE_SIZE)-1; - o1 = size%PAGE_SIZE; - o2 = (size+(size/4))%PAGE_SIZE; - DEB_CAP("size:%d, m1:%d, m2:%d, m3:%d, o1:%d, o2:%d\n", - size, m1, m2, m3, o1, o2); - break; - } - case 16: { - /* create some offsets inside the page table */ - m1 = ((size+PAGE_SIZE)/PAGE_SIZE)-1; - m2 = ((size+(size/2)+PAGE_SIZE)/PAGE_SIZE)-1; - m3 = ((2*size+PAGE_SIZE)/PAGE_SIZE)-1; - o1 = size%PAGE_SIZE; - o2 = (size+(size/2))%PAGE_SIZE; - DEB_CAP("size:%d, m1:%d, m2:%d, m3:%d, o1:%d, o2:%d\n", - size, m1, m2, m3, o1, o2); - break; - } - default: { - return -1; - } - } - - ptr1 = pt1->cpu; - ptr2 = pt2->cpu; - ptr3 = pt3->cpu; - - /* walk all pages, copy all page addresses to ptr1 */ - for (i = 0; i < length; i++, list++) { - for (p = 0; p * 4096 < sg_dma_len(list); p++, ptr1++) - *ptr1 = cpu_to_le32(sg_dma_address(list) - list->offset); - } -/* - ptr1 = pt1->cpu; - for(j=0;j<40;j++) { - printk("ptr1 %d: 0x%08x\n",j,ptr1[j]); - } -*/ - - /* if we have a user buffer, the first page may not be - aligned to a page boundary. */ - pt1->offset = dma->sglist->offset; - pt2->offset = pt1->offset+o1; - pt3->offset = pt1->offset+o2; - - /* create video-dma2 page table */ - ptr1 = pt1->cpu; - for(i = m1; i <= m2 ; i++, ptr2++) { - *ptr2 = ptr1[i]; - } - fill = *(ptr2-1); - for(;i<1024;i++,ptr2++) { - *ptr2 = fill; - } - /* create video-dma3 page table */ - ptr1 = pt1->cpu; - for(i = m2; i <= m3; i++,ptr3++) { - *ptr3 = ptr1[i]; - } - fill = *(ptr3-1); - for(;i<1024;i++,ptr3++) { - *ptr3 = fill; - } - /* finally: finish up video-dma1 page table */ - ptr1 = pt1->cpu+m1; - fill = pt1->cpu[m1]; - for(i=m1;i<1024;i++,ptr1++) { - *ptr1 = fill; - } -/* - ptr1 = pt1->cpu; - ptr2 = pt2->cpu; - ptr3 = pt3->cpu; - for(j=0;j<40;j++) { - printk("ptr1 %d: 0x%08x\n",j,ptr1[j]); - } - for(j=0;j<40;j++) { - printk("ptr2 %d: 0x%08x\n",j,ptr2[j]); - } - for(j=0;j<40;j++) { - printk("ptr3 %d: 0x%08x\n",j,ptr3[j]); - } -*/ - } else { - struct saa7146_pgtable *pt = &buf->pt[0]; - return saa7146_pgtable_build_single(pci, pt, list, length); - } - - return 0; -} - - -/********************************************************************************/ -/* file operations */ - -static int video_begin(struct saa7146_fh *fh) -{ - struct saa7146_dev *dev = fh->dev; - struct saa7146_vv *vv = dev->vv_data; - struct saa7146_format *fmt = NULL; - unsigned int resource; - int ret = 0, err = 0; - - DEB_EE("dev:%p, fh:%p\n", dev, fh); - - if ((vv->video_status & STATUS_CAPTURE) != 0) { - if (vv->video_fh == fh) { - DEB_S("already capturing\n"); - return 0; - } - DEB_S("already capturing in another open\n"); - return -EBUSY; - } - - if ((vv->video_status & STATUS_OVERLAY) != 0) { - DEB_S("warning: suspending overlay video for streaming capture\n"); - vv->ov_suspend = vv->video_fh; - err = saa7146_stop_preview(vv->video_fh); /* side effect: video_status is now 0, video_fh is NULL */ - if (0 != err) { - DEB_D("suspending video failed. aborting\n"); - return err; - } - } - - fmt = saa7146_format_by_fourcc(dev, vv->video_fmt.pixelformat); - /* we need to have a valid format set here */ - if (!fmt) - return -EINVAL; - - if (0 != (fmt->flags & FORMAT_IS_PLANAR)) { - resource = RESOURCE_DMA1_HPS|RESOURCE_DMA2_CLP|RESOURCE_DMA3_BRS; - } else { - resource = RESOURCE_DMA1_HPS; - } - - ret = saa7146_res_get(fh, resource); - if (0 == ret) { - DEB_S("cannot get capture resource %d\n", resource); - if (vv->ov_suspend != NULL) { - saa7146_start_preview(vv->ov_suspend); - vv->ov_suspend = NULL; - } - return -EBUSY; - } - - /* clear out beginning of streaming bit (rps register 0)*/ - saa7146_write(dev, MC2, MASK_27 ); - - /* enable rps0 irqs */ - SAA7146_IER_ENABLE(dev, MASK_27); - - vv->video_fh = fh; - vv->video_status = STATUS_CAPTURE; - - return 0; -} - -static int video_end(struct saa7146_fh *fh, struct file *file) -{ - struct saa7146_dev *dev = fh->dev; - struct saa7146_vv *vv = dev->vv_data; - struct saa7146_dmaqueue *q = &vv->video_dmaq; - struct saa7146_format *fmt = NULL; - unsigned long flags; - unsigned int resource; - u32 dmas = 0; - DEB_EE("dev:%p, fh:%p\n", dev, fh); - - if ((vv->video_status & STATUS_CAPTURE) != STATUS_CAPTURE) { - DEB_S("not capturing\n"); - return 0; - } - - if (vv->video_fh != fh) { - DEB_S("capturing, but in another open\n"); - return -EBUSY; - } - - fmt = saa7146_format_by_fourcc(dev, vv->video_fmt.pixelformat); - /* we need to have a valid format set here */ - if (!fmt) - return -EINVAL; - - if (0 != (fmt->flags & FORMAT_IS_PLANAR)) { - resource = RESOURCE_DMA1_HPS|RESOURCE_DMA2_CLP|RESOURCE_DMA3_BRS; - dmas = MASK_22 | MASK_21 | MASK_20; - } else { - resource = RESOURCE_DMA1_HPS; - dmas = MASK_22; - } - spin_lock_irqsave(&dev->slock,flags); - - /* disable rps0 */ - saa7146_write(dev, MC1, MASK_28); - - /* disable rps0 irqs */ - SAA7146_IER_DISABLE(dev, MASK_27); - - /* shut down all used video dma transfers */ - saa7146_write(dev, MC1, dmas); - - if (q->curr) - saa7146_buffer_finish(dev, q, VIDEOBUF_DONE); - - spin_unlock_irqrestore(&dev->slock, flags); - - vv->video_fh = NULL; - vv->video_status = 0; - - saa7146_res_free(fh, resource); - - if (vv->ov_suspend != NULL) { - saa7146_start_preview(vv->ov_suspend); - vv->ov_suspend = NULL; - } - - return 0; -} - -static int vidioc_querycap(struct file *file, void *fh, struct v4l2_capability *cap) -{ - struct saa7146_dev *dev = ((struct saa7146_fh *)fh)->dev; - - strscpy((char *)cap->driver, "saa7146 v4l2", sizeof(cap->driver)); - strscpy((char *)cap->card, dev->ext->name, sizeof(cap->card)); - cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_VIDEO_OVERLAY | - V4L2_CAP_READWRITE | V4L2_CAP_STREAMING | - V4L2_CAP_DEVICE_CAPS; - cap->capabilities |= dev->ext_vv_data->capabilities; - return 0; -} - -static int vidioc_g_fbuf(struct file *file, void *fh, struct v4l2_framebuffer *fb) -{ - struct saa7146_dev *dev = ((struct saa7146_fh *)fh)->dev; - struct saa7146_vv *vv = dev->vv_data; - - *fb = vv->ov_fb; - fb->capability = V4L2_FBUF_CAP_LIST_CLIPPING; - fb->flags = V4L2_FBUF_FLAG_PRIMARY; - return 0; -} - -static int vidioc_s_fbuf(struct file *file, void *fh, const struct v4l2_framebuffer *fb) -{ - struct saa7146_dev *dev = ((struct saa7146_fh *)fh)->dev; - struct saa7146_vv *vv = dev->vv_data; - struct saa7146_format *fmt; - - DEB_EE("VIDIOC_S_FBUF\n"); - - if (!capable(CAP_SYS_ADMIN) && !capable(CAP_SYS_RAWIO)) - return -EPERM; - - /* check args */ - fmt = saa7146_format_by_fourcc(dev, fb->fmt.pixelformat); - if (NULL == fmt) - return -EINVAL; - - /* planar formats are not allowed for overlay video, clipping and video dma would clash */ - if (fmt->flags & FORMAT_IS_PLANAR) - DEB_S("planar pixelformat '%4.4s' not allowed for overlay\n", - (char *)&fmt->pixelformat); - - /* check if overlay is running */ - if (IS_OVERLAY_ACTIVE(fh) != 0) { - if (vv->video_fh != fh) { - DEB_D("refusing to change framebuffer information while overlay is active in another open\n"); - return -EBUSY; - } - } - - /* ok, accept it */ - vv->ov_fb = *fb; - vv->ov_fmt = fmt; - - if (vv->ov_fb.fmt.bytesperline < vv->ov_fb.fmt.width) { - vv->ov_fb.fmt.bytesperline = vv->ov_fb.fmt.width * fmt->depth / 8; - DEB_D("setting bytesperline to %d\n", vv->ov_fb.fmt.bytesperline); - } - return 0; -} - -static int vidioc_enum_fmt_vid_cap(struct file *file, void *fh, struct v4l2_fmtdesc *f) -{ - if (f->index >= ARRAY_SIZE(formats)) - return -EINVAL; - f->pixelformat = formats[f->index].pixelformat; - return 0; -} - -int saa7146_s_ctrl(struct v4l2_ctrl *ctrl) -{ - struct saa7146_dev *dev = container_of(ctrl->handler, - struct saa7146_dev, ctrl_handler); - struct saa7146_vv *vv = dev->vv_data; - u32 val; - - switch (ctrl->id) { - case V4L2_CID_BRIGHTNESS: - val = saa7146_read(dev, BCS_CTRL); - val &= 0x00ffffff; - val |= (ctrl->val << 24); - saa7146_write(dev, BCS_CTRL, val); - saa7146_write(dev, MC2, MASK_22 | MASK_06); - break; - - case V4L2_CID_CONTRAST: - val = saa7146_read(dev, BCS_CTRL); - val &= 0xff00ffff; - val |= (ctrl->val << 16); - saa7146_write(dev, BCS_CTRL, val); - saa7146_write(dev, MC2, MASK_22 | MASK_06); - break; - - case V4L2_CID_SATURATION: - val = saa7146_read(dev, BCS_CTRL); - val &= 0xffffff00; - val |= (ctrl->val << 0); - saa7146_write(dev, BCS_CTRL, val); - saa7146_write(dev, MC2, MASK_22 | MASK_06); - break; - - case V4L2_CID_HFLIP: - /* fixme: we can support changing VFLIP and HFLIP here... */ - if ((vv->video_status & STATUS_CAPTURE)) - return -EBUSY; - vv->hflip = ctrl->val; - break; - - case V4L2_CID_VFLIP: - if ((vv->video_status & STATUS_CAPTURE)) - return -EBUSY; - vv->vflip = ctrl->val; - break; - - default: - return -EINVAL; - } - - if ((vv->video_status & STATUS_OVERLAY) != 0) { /* CHECK: && (vv->video_fh == fh)) */ - struct saa7146_fh *fh = vv->video_fh; - - saa7146_stop_preview(fh); - saa7146_start_preview(fh); - } - return 0; -} - -static int vidioc_g_parm(struct file *file, void *fh, - struct v4l2_streamparm *parm) -{ - struct saa7146_dev *dev = ((struct saa7146_fh *)fh)->dev; - struct saa7146_vv *vv = dev->vv_data; - - if (parm->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) - return -EINVAL; - parm->parm.capture.readbuffers = 1; - v4l2_video_std_frame_period(vv->standard->id, - &parm->parm.capture.timeperframe); - return 0; -} - -static int vidioc_g_fmt_vid_cap(struct file *file, void *fh, struct v4l2_format *f) -{ - struct saa7146_dev *dev = ((struct saa7146_fh *)fh)->dev; - struct saa7146_vv *vv = dev->vv_data; - - f->fmt.pix = vv->video_fmt; - return 0; -} - -static int vidioc_g_fmt_vid_overlay(struct file *file, void *fh, struct v4l2_format *f) -{ - struct saa7146_dev *dev = ((struct saa7146_fh *)fh)->dev; - struct saa7146_vv *vv = dev->vv_data; - - f->fmt.win = vv->ov.win; - return 0; -} - -static int vidioc_g_fmt_vbi_cap(struct file *file, void *fh, struct v4l2_format *f) -{ - struct saa7146_dev *dev = ((struct saa7146_fh *)fh)->dev; - struct saa7146_vv *vv = dev->vv_data; - - f->fmt.vbi = vv->vbi_fmt; - return 0; -} - -static int vidioc_try_fmt_vid_cap(struct file *file, void *fh, struct v4l2_format *f) -{ - struct saa7146_dev *dev = ((struct saa7146_fh *)fh)->dev; - struct saa7146_vv *vv = dev->vv_data; - struct saa7146_format *fmt; - enum v4l2_field field; - int maxw, maxh; - int calc_bpl; - - DEB_EE("V4L2_BUF_TYPE_VIDEO_CAPTURE: dev:%p, fh:%p\n", dev, fh); - - fmt = saa7146_format_by_fourcc(dev, f->fmt.pix.pixelformat); - if (NULL == fmt) - return -EINVAL; - - field = f->fmt.pix.field; - maxw = vv->standard->h_max_out; - maxh = vv->standard->v_max_out; - - if (V4L2_FIELD_ANY == field) { - field = (f->fmt.pix.height > maxh / 2) - ? V4L2_FIELD_INTERLACED - : V4L2_FIELD_BOTTOM; - } - switch (field) { - case V4L2_FIELD_ALTERNATE: - vv->last_field = V4L2_FIELD_TOP; - maxh = maxh / 2; - break; - case V4L2_FIELD_TOP: - case V4L2_FIELD_BOTTOM: - vv->last_field = V4L2_FIELD_INTERLACED; - maxh = maxh / 2; - break; - case V4L2_FIELD_INTERLACED: - vv->last_field = V4L2_FIELD_INTERLACED; - break; - default: - DEB_D("no known field mode '%d'\n", field); - return -EINVAL; - } - - f->fmt.pix.field = field; - f->fmt.pix.colorspace = V4L2_COLORSPACE_SMPTE170M; - if (f->fmt.pix.width > maxw) - f->fmt.pix.width = maxw; - if (f->fmt.pix.height > maxh) - f->fmt.pix.height = maxh; - - calc_bpl = (f->fmt.pix.width * fmt->depth) / 8; - - if (f->fmt.pix.bytesperline < calc_bpl) - f->fmt.pix.bytesperline = calc_bpl; - - if (f->fmt.pix.bytesperline > (2 * PAGE_SIZE * fmt->depth) / 8) /* arbitrary constraint */ - f->fmt.pix.bytesperline = calc_bpl; - - f->fmt.pix.sizeimage = f->fmt.pix.bytesperline * f->fmt.pix.height; - DEB_D("w:%d, h:%d, bytesperline:%d, sizeimage:%d\n", - f->fmt.pix.width, f->fmt.pix.height, - f->fmt.pix.bytesperline, f->fmt.pix.sizeimage); - - return 0; -} - - -static int vidioc_try_fmt_vid_overlay(struct file *file, void *fh, struct v4l2_format *f) -{ - struct saa7146_dev *dev = ((struct saa7146_fh *)fh)->dev; - struct saa7146_vv *vv = dev->vv_data; - struct v4l2_window *win = &f->fmt.win; - enum v4l2_field field; - int maxw, maxh; - - DEB_EE("dev:%p\n", dev); - - if (NULL == vv->ov_fb.base) { - DEB_D("no fb base set\n"); - return -EINVAL; - } - if (NULL == vv->ov_fmt) { - DEB_D("no fb fmt set\n"); - return -EINVAL; - } - if (win->w.width < 48 || win->w.height < 32) { - DEB_D("min width/height. (%d,%d)\n", - win->w.width, win->w.height); - return -EINVAL; - } - if (win->clipcount > 16) { - DEB_D("clipcount too big\n"); - return -EINVAL; - } - - field = win->field; - maxw = vv->standard->h_max_out; - maxh = vv->standard->v_max_out; - - if (V4L2_FIELD_ANY == field) { - field = (win->w.height > maxh / 2) - ? V4L2_FIELD_INTERLACED - : V4L2_FIELD_TOP; - } - switch (field) { - case V4L2_FIELD_TOP: - case V4L2_FIELD_BOTTOM: - case V4L2_FIELD_ALTERNATE: - maxh = maxh / 2; - break; - case V4L2_FIELD_INTERLACED: - break; - default: - DEB_D("no known field mode '%d'\n", field); - return -EINVAL; - } - - win->field = field; - if (win->w.width > maxw) - win->w.width = maxw; - if (win->w.height > maxh) - win->w.height = maxh; - - return 0; -} - -static int vidioc_s_fmt_vid_cap(struct file *file, void *__fh, struct v4l2_format *f) -{ - struct saa7146_fh *fh = __fh; - struct saa7146_dev *dev = fh->dev; - struct saa7146_vv *vv = dev->vv_data; - int err; - - DEB_EE("V4L2_BUF_TYPE_VIDEO_CAPTURE: dev:%p, fh:%p\n", dev, fh); - if (IS_CAPTURE_ACTIVE(fh) != 0) { - DEB_EE("streaming capture is active\n"); - return -EBUSY; - } - err = vidioc_try_fmt_vid_cap(file, fh, f); - if (0 != err) - return err; - vv->video_fmt = f->fmt.pix; - DEB_EE("set to pixelformat '%4.4s'\n", - (char *)&vv->video_fmt.pixelformat); - return 0; -} - -static int vidioc_s_fmt_vid_overlay(struct file *file, void *__fh, struct v4l2_format *f) -{ - struct saa7146_fh *fh = __fh; - struct saa7146_dev *dev = fh->dev; - struct saa7146_vv *vv = dev->vv_data; - int err; - - DEB_EE("V4L2_BUF_TYPE_VIDEO_OVERLAY: dev:%p, fh:%p\n", dev, fh); - err = vidioc_try_fmt_vid_overlay(file, fh, f); - if (0 != err) - return err; - vv->ov.win = f->fmt.win; - vv->ov.nclips = f->fmt.win.clipcount; - if (vv->ov.nclips > 16) - vv->ov.nclips = 16; - memcpy(vv->ov.clips, f->fmt.win.clips, - sizeof(struct v4l2_clip) * vv->ov.nclips); - - /* vv->ov.fh is used to indicate that we have valid overlay information, too */ - vv->ov.fh = fh; - - /* check if our current overlay is active */ - if (IS_OVERLAY_ACTIVE(fh) != 0) { - saa7146_stop_preview(fh); - saa7146_start_preview(fh); - } - return 0; -} - -static int vidioc_g_std(struct file *file, void *fh, v4l2_std_id *norm) -{ - struct saa7146_dev *dev = ((struct saa7146_fh *)fh)->dev; - struct saa7146_vv *vv = dev->vv_data; - - *norm = vv->standard->id; - return 0; -} - - /* the saa7146 supfhrts (used in conjunction with the saa7111a for example) - PAL / NTSC / SECAM. if your hardware does not (or does more) - -- override this function in your extension */ -/* - case VIDIOC_ENUMSTD: - { - struct v4l2_standard *e = arg; - if (e->index < 0 ) - return -EINVAL; - if( e->index < dev->ext_vv_data->num_stds ) { - DEB_EE("VIDIOC_ENUMSTD: index:%d\n", e->index); - v4l2_video_std_construct(e, dev->ext_vv_data->stds[e->index].id, dev->ext_vv_data->stds[e->index].name); - return 0; - } - return -EINVAL; - } - */ - -static int vidioc_s_std(struct file *file, void *fh, v4l2_std_id id) -{ - struct saa7146_dev *dev = ((struct saa7146_fh *)fh)->dev; - struct saa7146_vv *vv = dev->vv_data; - int found = 0; - int err, i; - - DEB_EE("VIDIOC_S_STD\n"); - - if ((vv->video_status & STATUS_CAPTURE) == STATUS_CAPTURE) { - DEB_D("cannot change video standard while streaming capture is active\n"); - return -EBUSY; - } - - if ((vv->video_status & STATUS_OVERLAY) != 0) { - vv->ov_suspend = vv->video_fh; - err = saa7146_stop_preview(vv->video_fh); /* side effect: video_status is now 0, video_fh is NULL */ - if (0 != err) { - DEB_D("suspending video failed. aborting\n"); - return err; - } - } - - for (i = 0; i < dev->ext_vv_data->num_stds; i++) - if (id & dev->ext_vv_data->stds[i].id) - break; - if (i != dev->ext_vv_data->num_stds) { - vv->standard = &dev->ext_vv_data->stds[i]; - if (NULL != dev->ext_vv_data->std_callback) - dev->ext_vv_data->std_callback(dev, vv->standard); - found = 1; - } - - if (vv->ov_suspend != NULL) { - saa7146_start_preview(vv->ov_suspend); - vv->ov_suspend = NULL; - } - - if (!found) { - DEB_EE("VIDIOC_S_STD: standard not found\n"); - return -EINVAL; - } - - DEB_EE("VIDIOC_S_STD: set to standard to '%s'\n", vv->standard->name); - return 0; -} - -static int vidioc_overlay(struct file *file, void *fh, unsigned int on) -{ - int err; - - DEB_D("VIDIOC_OVERLAY on:%d\n", on); - if (on) - err = saa7146_start_preview(fh); - else - err = saa7146_stop_preview(fh); - return err; -} - -static int vidioc_reqbufs(struct file *file, void *__fh, struct v4l2_requestbuffers *b) -{ - struct saa7146_fh *fh = __fh; - - if (b->type == V4L2_BUF_TYPE_VIDEO_CAPTURE) - return videobuf_reqbufs(&fh->video_q, b); - if (b->type == V4L2_BUF_TYPE_VBI_CAPTURE) - return videobuf_reqbufs(&fh->vbi_q, b); - return -EINVAL; -} - -static int vidioc_querybuf(struct file *file, void *__fh, struct v4l2_buffer *buf) -{ - struct saa7146_fh *fh = __fh; - - if (buf->type == V4L2_BUF_TYPE_VIDEO_CAPTURE) - return videobuf_querybuf(&fh->video_q, buf); - if (buf->type == V4L2_BUF_TYPE_VBI_CAPTURE) - return videobuf_querybuf(&fh->vbi_q, buf); - return -EINVAL; -} - -static int vidioc_qbuf(struct file *file, void *__fh, struct v4l2_buffer *buf) -{ - struct saa7146_fh *fh = __fh; - - if (buf->type == V4L2_BUF_TYPE_VIDEO_CAPTURE) - return videobuf_qbuf(&fh->video_q, buf); - if (buf->type == V4L2_BUF_TYPE_VBI_CAPTURE) - return videobuf_qbuf(&fh->vbi_q, buf); - return -EINVAL; -} - -static int vidioc_dqbuf(struct file *file, void *__fh, struct v4l2_buffer *buf) -{ - struct saa7146_fh *fh = __fh; - - if (buf->type == V4L2_BUF_TYPE_VIDEO_CAPTURE) - return videobuf_dqbuf(&fh->video_q, buf, file->f_flags & O_NONBLOCK); - if (buf->type == V4L2_BUF_TYPE_VBI_CAPTURE) - return videobuf_dqbuf(&fh->vbi_q, buf, file->f_flags & O_NONBLOCK); - return -EINVAL; -} - -static int vidioc_streamon(struct file *file, void *__fh, enum v4l2_buf_type type) -{ - struct saa7146_fh *fh = __fh; - int err; - - DEB_D("VIDIOC_STREAMON, type:%d\n", type); - - err = video_begin(fh); - if (err) - return err; - if (type == V4L2_BUF_TYPE_VIDEO_CAPTURE) - return videobuf_streamon(&fh->video_q); - if (type == V4L2_BUF_TYPE_VBI_CAPTURE) - return videobuf_streamon(&fh->vbi_q); - return -EINVAL; -} - -static int vidioc_streamoff(struct file *file, void *__fh, enum v4l2_buf_type type) -{ - struct saa7146_fh *fh = __fh; - struct saa7146_dev *dev = fh->dev; - struct saa7146_vv *vv = dev->vv_data; - int err; - - DEB_D("VIDIOC_STREAMOFF, type:%d\n", type); - - /* ugly: we need to copy some checks from video_end(), - because videobuf_streamoff() relies on the capture running. - check and fix this */ - if ((vv->video_status & STATUS_CAPTURE) != STATUS_CAPTURE) { - DEB_S("not capturing\n"); - return 0; - } - - if (vv->video_fh != fh) { - DEB_S("capturing, but in another open\n"); - return -EBUSY; - } - - err = -EINVAL; - if (type == V4L2_BUF_TYPE_VIDEO_CAPTURE) - err = videobuf_streamoff(&fh->video_q); - else if (type == V4L2_BUF_TYPE_VBI_CAPTURE) - err = videobuf_streamoff(&fh->vbi_q); - if (0 != err) { - DEB_D("warning: videobuf_streamoff() failed\n"); - video_end(fh, file); - } else { - err = video_end(fh, file); - } - return err; -} - -const struct v4l2_ioctl_ops saa7146_video_ioctl_ops = { - .vidioc_querycap = vidioc_querycap, - .vidioc_enum_fmt_vid_cap = vidioc_enum_fmt_vid_cap, - .vidioc_enum_fmt_vid_overlay = vidioc_enum_fmt_vid_cap, - .vidioc_g_fmt_vid_cap = vidioc_g_fmt_vid_cap, - .vidioc_try_fmt_vid_cap = vidioc_try_fmt_vid_cap, - .vidioc_s_fmt_vid_cap = vidioc_s_fmt_vid_cap, - .vidioc_g_fmt_vid_overlay = vidioc_g_fmt_vid_overlay, - .vidioc_try_fmt_vid_overlay = vidioc_try_fmt_vid_overlay, - .vidioc_s_fmt_vid_overlay = vidioc_s_fmt_vid_overlay, - - .vidioc_overlay = vidioc_overlay, - .vidioc_g_fbuf = vidioc_g_fbuf, - .vidioc_s_fbuf = vidioc_s_fbuf, - .vidioc_reqbufs = vidioc_reqbufs, - .vidioc_querybuf = vidioc_querybuf, - .vidioc_qbuf = vidioc_qbuf, - .vidioc_dqbuf = vidioc_dqbuf, - .vidioc_g_std = vidioc_g_std, - .vidioc_s_std = vidioc_s_std, - .vidioc_streamon = vidioc_streamon, - .vidioc_streamoff = vidioc_streamoff, - .vidioc_g_parm = vidioc_g_parm, - .vidioc_subscribe_event = v4l2_ctrl_subscribe_event, - .vidioc_unsubscribe_event = v4l2_event_unsubscribe, -}; - -const struct v4l2_ioctl_ops saa7146_vbi_ioctl_ops = { - .vidioc_querycap = vidioc_querycap, - .vidioc_g_fmt_vbi_cap = vidioc_g_fmt_vbi_cap, - - .vidioc_reqbufs = vidioc_reqbufs, - .vidioc_querybuf = vidioc_querybuf, - .vidioc_qbuf = vidioc_qbuf, - .vidioc_dqbuf = vidioc_dqbuf, - .vidioc_g_std = vidioc_g_std, - .vidioc_s_std = vidioc_s_std, - .vidioc_streamon = vidioc_streamon, - .vidioc_streamoff = vidioc_streamoff, - .vidioc_g_parm = vidioc_g_parm, - .vidioc_subscribe_event = v4l2_ctrl_subscribe_event, - .vidioc_unsubscribe_event = v4l2_event_unsubscribe, -}; - -/*********************************************************************************/ -/* buffer handling functions */ - -static int buffer_activate (struct saa7146_dev *dev, - struct saa7146_buf *buf, - struct saa7146_buf *next) -{ - struct saa7146_vv *vv = dev->vv_data; - - buf->vb.state = VIDEOBUF_ACTIVE; - saa7146_set_capture(dev,buf,next); - - mod_timer(&vv->video_dmaq.timeout, jiffies+BUFFER_TIMEOUT); - return 0; -} - -static void release_all_pagetables(struct saa7146_dev *dev, struct saa7146_buf *buf) -{ - saa7146_pgtable_free(dev->pci, &buf->pt[0]); - saa7146_pgtable_free(dev->pci, &buf->pt[1]); - saa7146_pgtable_free(dev->pci, &buf->pt[2]); -} - -static int buffer_prepare(struct videobuf_queue *q, - struct videobuf_buffer *vb, enum v4l2_field field) -{ - struct file *file = q->priv_data; - struct saa7146_fh *fh = file->private_data; - struct saa7146_dev *dev = fh->dev; - struct saa7146_vv *vv = dev->vv_data; - struct saa7146_buf *buf = (struct saa7146_buf *)vb; - int size,err = 0; - - DEB_CAP("vbuf:%p\n", vb); - - /* sanity checks */ - if (vv->video_fmt.width < 48 || - vv->video_fmt.height < 32 || - vv->video_fmt.width > vv->standard->h_max_out || - vv->video_fmt.height > vv->standard->v_max_out) { - DEB_D("w (%d) / h (%d) out of bounds\n", - vv->video_fmt.width, vv->video_fmt.height); - return -EINVAL; - } - - size = vv->video_fmt.sizeimage; - if (0 != buf->vb.baddr && buf->vb.bsize < size) { - DEB_D("size mismatch\n"); - return -EINVAL; - } - - DEB_CAP("buffer_prepare [size=%dx%d,bytes=%d,fields=%s]\n", - vv->video_fmt.width, vv->video_fmt.height, - size, v4l2_field_names[vv->video_fmt.field]); - if (buf->vb.width != vv->video_fmt.width || - buf->vb.bytesperline != vv->video_fmt.bytesperline || - buf->vb.height != vv->video_fmt.height || - buf->vb.size != size || - buf->vb.field != field || - buf->vb.field != vv->video_fmt.field || - buf->fmt != &vv->video_fmt) { - saa7146_dma_free(dev,q,buf); - } - - if (VIDEOBUF_NEEDS_INIT == buf->vb.state) { - struct saa7146_format *sfmt; - - buf->vb.bytesperline = vv->video_fmt.bytesperline; - buf->vb.width = vv->video_fmt.width; - buf->vb.height = vv->video_fmt.height; - buf->vb.size = size; - buf->vb.field = field; - buf->fmt = &vv->video_fmt; - buf->vb.field = vv->video_fmt.field; - - sfmt = saa7146_format_by_fourcc(dev,buf->fmt->pixelformat); - - release_all_pagetables(dev, buf); - if( 0 != IS_PLANAR(sfmt->trans)) { - saa7146_pgtable_alloc(dev->pci, &buf->pt[0]); - saa7146_pgtable_alloc(dev->pci, &buf->pt[1]); - saa7146_pgtable_alloc(dev->pci, &buf->pt[2]); - } else { - saa7146_pgtable_alloc(dev->pci, &buf->pt[0]); - } - - err = videobuf_iolock(q,&buf->vb, &vv->ov_fb); - if (err) - goto oops; - err = saa7146_pgtable_build(dev,buf); - if (err) - goto oops; - } - buf->vb.state = VIDEOBUF_PREPARED; - buf->activate = buffer_activate; - - return 0; - - oops: - DEB_D("error out\n"); - saa7146_dma_free(dev,q,buf); - - return err; -} - -static int buffer_setup(struct videobuf_queue *q, unsigned int *count, unsigned int *size) -{ - struct file *file = q->priv_data; - struct saa7146_fh *fh = file->private_data; - struct saa7146_vv *vv = fh->dev->vv_data; - - if (0 == *count || *count > MAX_SAA7146_CAPTURE_BUFFERS) - *count = MAX_SAA7146_CAPTURE_BUFFERS; - - *size = vv->video_fmt.sizeimage; - - /* check if we exceed the "max_memory" parameter */ - if( (*count * *size) > (max_memory*1048576) ) { - *count = (max_memory*1048576) / *size; - } - - DEB_CAP("%d buffers, %d bytes each\n", *count, *size); - - return 0; -} - -static void buffer_queue(struct videobuf_queue *q, struct videobuf_buffer *vb) -{ - struct file *file = q->priv_data; - struct saa7146_fh *fh = file->private_data; - struct saa7146_dev *dev = fh->dev; - struct saa7146_vv *vv = dev->vv_data; - struct saa7146_buf *buf = (struct saa7146_buf *)vb; - - DEB_CAP("vbuf:%p\n", vb); - saa7146_buffer_queue(fh->dev, &vv->video_dmaq, buf); -} - -static void buffer_release(struct videobuf_queue *q, struct videobuf_buffer *vb) -{ - struct file *file = q->priv_data; - struct saa7146_fh *fh = file->private_data; - struct saa7146_dev *dev = fh->dev; - struct saa7146_buf *buf = (struct saa7146_buf *)vb; - - DEB_CAP("vbuf:%p\n", vb); - - saa7146_dma_free(dev,q,buf); - - release_all_pagetables(dev, buf); -} - -static const struct videobuf_queue_ops video_qops = { - .buf_setup = buffer_setup, - .buf_prepare = buffer_prepare, - .buf_queue = buffer_queue, - .buf_release = buffer_release, -}; - -/********************************************************************************/ -/* file operations */ - -static void video_init(struct saa7146_dev *dev, struct saa7146_vv *vv) -{ - INIT_LIST_HEAD(&vv->video_dmaq.queue); - - timer_setup(&vv->video_dmaq.timeout, saa7146_buffer_timeout, 0); - vv->video_dmaq.dev = dev; - - /* set some default values */ - vv->standard = &dev->ext_vv_data->stds[0]; - - /* FIXME: what's this? */ - vv->current_hps_source = SAA7146_HPS_SOURCE_PORT_A; - vv->current_hps_sync = SAA7146_HPS_SYNC_PORT_A; -} - - -static int video_open(struct saa7146_dev *dev, struct file *file) -{ - struct saa7146_fh *fh = file->private_data; - - videobuf_queue_sg_init(&fh->video_q, &video_qops, - &dev->pci->dev, &dev->slock, - V4L2_BUF_TYPE_VIDEO_CAPTURE, - V4L2_FIELD_INTERLACED, - sizeof(struct saa7146_buf), - file, &dev->v4l2_lock); - - return 0; -} - - -static void video_close(struct saa7146_dev *dev, struct file *file) -{ - struct saa7146_fh *fh = file->private_data; - struct saa7146_vv *vv = dev->vv_data; - struct videobuf_queue *q = &fh->video_q; - - if (IS_CAPTURE_ACTIVE(fh) != 0) - video_end(fh, file); - else if (IS_OVERLAY_ACTIVE(fh) != 0) - saa7146_stop_preview(fh); - - videobuf_stop(q); - /* hmm, why is this function declared void? */ -} - - -static void video_irq_done(struct saa7146_dev *dev, unsigned long st) -{ - struct saa7146_vv *vv = dev->vv_data; - struct saa7146_dmaqueue *q = &vv->video_dmaq; - - spin_lock(&dev->slock); - DEB_CAP("called\n"); - - /* only finish the buffer if we have one... */ - if( NULL != q->curr ) { - saa7146_buffer_finish(dev,q,VIDEOBUF_DONE); - } - saa7146_buffer_next(dev,q,0); - - spin_unlock(&dev->slock); -} - -static ssize_t video_read(struct file *file, char __user *data, size_t count, loff_t *ppos) -{ - struct saa7146_fh *fh = file->private_data; - struct saa7146_dev *dev = fh->dev; - struct saa7146_vv *vv = dev->vv_data; - ssize_t ret = 0; - - DEB_EE("called\n"); - - if ((vv->video_status & STATUS_CAPTURE) != 0) { - /* fixme: should we allow read() captures while streaming capture? */ - if (vv->video_fh == fh) { - DEB_S("already capturing\n"); - return -EBUSY; - } - DEB_S("already capturing in another open\n"); - return -EBUSY; - } - - ret = video_begin(fh); - if( 0 != ret) { - goto out; - } - - ret = videobuf_read_one(&fh->video_q , data, count, ppos, - file->f_flags & O_NONBLOCK); - if (ret != 0) { - video_end(fh, file); - } else { - ret = video_end(fh, file); - } -out: - /* restart overlay if it was active before */ - if (vv->ov_suspend != NULL) { - saa7146_start_preview(vv->ov_suspend); - vv->ov_suspend = NULL; - } - - return ret; -} - -const struct saa7146_use_ops saa7146_video_uops = { - .init = video_init, - .open = video_open, - .release = video_close, - .irq_done = video_irq_done, - .read = video_read, -}; diff --git a/drivers/staging/media/deprecated/saa7146/common/saa7146_vv.h b/drivers/staging/media/deprecated/saa7146/common/saa7146_vv.h deleted file mode 100644 index d7bd916fe3ad..000000000000 --- a/drivers/staging/media/deprecated/saa7146/common/saa7146_vv.h +++ /dev/null @@ -1,266 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -#ifndef __SAA7146_VV__ -#define __SAA7146_VV__ - -#include -#include -#include -#include -#include "saa7146.h" - -#define MAX_SAA7146_CAPTURE_BUFFERS 32 /* arbitrary */ -#define BUFFER_TIMEOUT (HZ/2) /* 0.5 seconds */ - -#define WRITE_RPS0(x) do { \ - dev->d_rps0.cpu_addr[ count++ ] = cpu_to_le32(x); \ - } while (0); - -#define WRITE_RPS1(x) do { \ - dev->d_rps1.cpu_addr[ count++ ] = cpu_to_le32(x); \ - } while (0); - -struct saa7146_video_dma { - u32 base_odd; - u32 base_even; - u32 prot_addr; - u32 pitch; - u32 base_page; - u32 num_line_byte; -}; - -#define FORMAT_BYTE_SWAP 0x1 -#define FORMAT_IS_PLANAR 0x2 - -struct saa7146_format { - u32 pixelformat; - u32 trans; - u8 depth; - u8 flags; - u8 swap; -}; - -struct saa7146_standard -{ - char *name; - v4l2_std_id id; - - int v_offset; /* number of lines of vertical offset before processing */ - int v_field; /* number of lines in a field for HPS to process */ - - int h_offset; /* horizontal offset of processing window */ - int h_pixels; /* number of horizontal pixels to process */ - - int v_max_out; - int h_max_out; -}; - -/* buffer for one video/vbi frame */ -struct saa7146_buf { - /* common v4l buffer stuff -- must be first */ - struct videobuf_buffer vb; - - /* saa7146 specific */ - struct v4l2_pix_format *fmt; - int (*activate)(struct saa7146_dev *dev, - struct saa7146_buf *buf, - struct saa7146_buf *next); - - /* page tables */ - struct saa7146_pgtable pt[3]; -}; - -struct saa7146_dmaqueue { - struct saa7146_dev *dev; - struct saa7146_buf *curr; - struct list_head queue; - struct timer_list timeout; -}; - -struct saa7146_overlay { - struct saa7146_fh *fh; - struct v4l2_window win; - struct v4l2_clip clips[16]; - int nclips; -}; - -/* per open data */ -struct saa7146_fh { - /* Must be the first field! */ - struct v4l2_fh fh; - struct saa7146_dev *dev; - - /* video capture */ - struct videobuf_queue video_q; - - /* vbi capture */ - struct videobuf_queue vbi_q; - - unsigned int resources; /* resource management for device open */ -}; - -#define STATUS_OVERLAY 0x01 -#define STATUS_CAPTURE 0x02 - -struct saa7146_vv -{ - /* vbi capture */ - struct saa7146_dmaqueue vbi_dmaq; - struct v4l2_vbi_format vbi_fmt; - struct timer_list vbi_read_timeout; - struct file *vbi_read_timeout_file; - /* vbi workaround interrupt queue */ - wait_queue_head_t vbi_wq; - int vbi_fieldcount; - struct saa7146_fh *vbi_streaming; - - int video_status; - struct saa7146_fh *video_fh; - - /* video overlay */ - struct saa7146_overlay ov; - struct v4l2_framebuffer ov_fb; - struct saa7146_format *ov_fmt; - struct saa7146_fh *ov_suspend; - - /* video capture */ - struct saa7146_dmaqueue video_dmaq; - struct v4l2_pix_format video_fmt; - enum v4l2_field last_field; - - /* common: fixme? shouldn't this be in saa7146_fh? - (this leads to a more complicated question: shall the driver - store the different settings (for example S_INPUT) for every open - and restore it appropriately, or should all settings be common for - all opens? currently, we do the latter, like all other - drivers do... */ - struct saa7146_standard *standard; - - int vflip; - int hflip; - int current_hps_source; - int current_hps_sync; - - struct saa7146_dma d_clipping; /* pointer to clipping memory */ - - unsigned int resources; /* resource management for device */ -}; - -/* flags */ -#define SAA7146_USE_PORT_B_FOR_VBI 0x2 /* use input port b for vbi hardware bug workaround */ - -struct saa7146_ext_vv -{ - /* information about the video capabilities of the device */ - int inputs; - int audios; - u32 capabilities; - int flags; - - /* additionally supported transmission standards */ - struct saa7146_standard *stds; - int num_stds; - int (*std_callback)(struct saa7146_dev*, struct saa7146_standard *); - - /* the extension can override this */ - struct v4l2_ioctl_ops vid_ops; - struct v4l2_ioctl_ops vbi_ops; - /* pointer to the saa7146 core ops */ - const struct v4l2_ioctl_ops *core_ops; - - struct v4l2_file_operations vbi_fops; -}; - -struct saa7146_use_ops { - void (*init)(struct saa7146_dev *, struct saa7146_vv *); - int(*open)(struct saa7146_dev *, struct file *); - void (*release)(struct saa7146_dev *, struct file *); - void (*irq_done)(struct saa7146_dev *, unsigned long status); - ssize_t (*read)(struct file *, char __user *, size_t, loff_t *); -}; - -/* from saa7146_fops.c */ -int saa7146_register_device(struct video_device *vid, struct saa7146_dev *dev, char *name, int type); -int saa7146_unregister_device(struct video_device *vid, struct saa7146_dev *dev); -void saa7146_buffer_finish(struct saa7146_dev *dev, struct saa7146_dmaqueue *q, int state); -void saa7146_buffer_next(struct saa7146_dev *dev, struct saa7146_dmaqueue *q,int vbi); -int saa7146_buffer_queue(struct saa7146_dev *dev, struct saa7146_dmaqueue *q, struct saa7146_buf *buf); -void saa7146_buffer_timeout(struct timer_list *t); -void saa7146_dma_free(struct saa7146_dev* dev,struct videobuf_queue *q, - struct saa7146_buf *buf); - -int saa7146_vv_init(struct saa7146_dev* dev, struct saa7146_ext_vv *ext_vv); -int saa7146_vv_release(struct saa7146_dev* dev); - -/* from saa7146_hlp.c */ -int saa7146_enable_overlay(struct saa7146_fh *fh); -void saa7146_disable_overlay(struct saa7146_fh *fh); - -void saa7146_set_capture(struct saa7146_dev *dev, struct saa7146_buf *buf, struct saa7146_buf *next); -void saa7146_write_out_dma(struct saa7146_dev* dev, int which, struct saa7146_video_dma* vdma) ; -void saa7146_set_hps_source_and_sync(struct saa7146_dev *saa, int source, int sync); -void saa7146_set_gpio(struct saa7146_dev *saa, u8 pin, u8 data); - -/* from saa7146_video.c */ -extern const struct v4l2_ioctl_ops saa7146_video_ioctl_ops; -extern const struct v4l2_ioctl_ops saa7146_vbi_ioctl_ops; -extern const struct saa7146_use_ops saa7146_video_uops; -int saa7146_start_preview(struct saa7146_fh *fh); -int saa7146_stop_preview(struct saa7146_fh *fh); -long saa7146_video_do_ioctl(struct file *file, unsigned int cmd, void *arg); -int saa7146_s_ctrl(struct v4l2_ctrl *ctrl); - -/* from saa7146_vbi.c */ -extern const struct saa7146_use_ops saa7146_vbi_uops; - -/* resource management functions */ -int saa7146_res_get(struct saa7146_fh *fh, unsigned int bit); -void saa7146_res_free(struct saa7146_fh *fh, unsigned int bits); - -#define RESOURCE_DMA1_HPS 0x1 -#define RESOURCE_DMA2_CLP 0x2 -#define RESOURCE_DMA3_BRS 0x4 - -/* saa7146 source inputs */ -#define SAA7146_HPS_SOURCE_PORT_A 0x00 -#define SAA7146_HPS_SOURCE_PORT_B 0x01 -#define SAA7146_HPS_SOURCE_YPB_CPA 0x02 -#define SAA7146_HPS_SOURCE_YPA_CPB 0x03 - -/* sync inputs */ -#define SAA7146_HPS_SYNC_PORT_A 0x00 -#define SAA7146_HPS_SYNC_PORT_B 0x01 - -/* some memory sizes */ -/* max. 16 clipping rectangles */ -#define SAA7146_CLIPPING_MEM (16 * 4 * sizeof(u32)) - -/* some defines for the various clipping-modes */ -#define SAA7146_CLIPPING_RECT 0x4 -#define SAA7146_CLIPPING_RECT_INVERTED 0x5 -#define SAA7146_CLIPPING_MASK 0x6 -#define SAA7146_CLIPPING_MASK_INVERTED 0x7 - -/* output formats: each entry holds four information */ -#define RGB08_COMPOSED 0x0217 /* composed is used in the sense of "not-planar" */ -/* this means: planar?=0, yuv2rgb-conversation-mode=2, dither=yes(=1), format-mode = 7 */ -#define RGB15_COMPOSED 0x0213 -#define RGB16_COMPOSED 0x0210 -#define RGB24_COMPOSED 0x0201 -#define RGB32_COMPOSED 0x0202 - -#define Y8 0x0006 -#define YUV411_COMPOSED 0x0003 -#define YUV422_COMPOSED 0x0000 -/* this means: planar?=1, yuv2rgb-conversion-mode=0, dither=no(=0), format-mode = b */ -#define YUV411_DECOMPOSED 0x100b -#define YUV422_DECOMPOSED 0x1009 -#define YUV420_DECOMPOSED 0x100a - -#define IS_PLANAR(x) (x & 0xf000) - -/* misc defines */ -#define SAA7146_NO_SWAP (0x0) -#define SAA7146_TWO_BYTE_SWAP (0x1) -#define SAA7146_FOUR_BYTE_SWAP (0x2) - -#endif diff --git a/drivers/staging/media/deprecated/saa7146/saa7146/Kconfig b/drivers/staging/media/deprecated/saa7146/saa7146/Kconfig deleted file mode 100644 index 228e8d3f8d2b..000000000000 --- a/drivers/staging/media/deprecated/saa7146/saa7146/Kconfig +++ /dev/null @@ -1,48 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0-only -config VIDEO_HEXIUM_GEMINI - tristate "Hexium Gemini frame grabber (DEPRECATED)" - depends on PCI && VIDEO_DEV && I2C - select VIDEO_SAA7146_VV - help - This is a video4linux driver for the Hexium Gemini frame - grabber card by Hexium. Please note that the Gemini Dual - card is *not* fully supported. - - This driver is deprecated and is scheduled for removal by - the beginning of 2023. See the TODO file for more information. - - To compile this driver as a module, choose M here: the - module will be called hexium_gemini. - -config VIDEO_HEXIUM_ORION - tristate "Hexium HV-PCI6 and Orion frame grabber (DEPRECATED)" - depends on PCI && VIDEO_DEV && I2C - select VIDEO_SAA7146_VV - help - This is a video4linux driver for the Hexium HV-PCI6 and - Orion frame grabber cards by Hexium. - - This driver is deprecated and is scheduled for removal by - the beginning of 2023. See the TODO file for more information. - - To compile this driver as a module, choose M here: the - module will be called hexium_orion. - -config VIDEO_MXB - tristate "Siemens-Nixdorf 'Multimedia eXtension Board' (DEPRECATED)" - depends on PCI && VIDEO_DEV && I2C - select VIDEO_SAA7146_VV - select VIDEO_TUNER - select VIDEO_SAA711X if MEDIA_SUBDRV_AUTOSELECT - select VIDEO_TDA9840 if MEDIA_SUBDRV_AUTOSELECT - select VIDEO_TEA6415C if MEDIA_SUBDRV_AUTOSELECT - select VIDEO_TEA6420 if MEDIA_SUBDRV_AUTOSELECT - help - This is a video4linux driver for the 'Multimedia eXtension Board' - TV card by Siemens-Nixdorf. - - This driver is deprecated and is scheduled for removal by - the beginning of 2023. See the TODO file for more information. - - To compile this driver as a module, choose M here: the - module will be called mxb. diff --git a/drivers/staging/media/deprecated/saa7146/saa7146/Makefile b/drivers/staging/media/deprecated/saa7146/saa7146/Makefile deleted file mode 100644 index 37c9336f83d5..000000000000 --- a/drivers/staging/media/deprecated/saa7146/saa7146/Makefile +++ /dev/null @@ -1,6 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0-only -obj-$(CONFIG_VIDEO_MXB) += mxb.o -obj-$(CONFIG_VIDEO_HEXIUM_ORION) += hexium_orion.o -obj-$(CONFIG_VIDEO_HEXIUM_GEMINI) += hexium_gemini.o - -ccflags-y += -I$(srctree)/drivers/media/i2c diff --git a/drivers/staging/media/deprecated/saa7146/saa7146/TODO b/drivers/staging/media/deprecated/saa7146/saa7146/TODO deleted file mode 100644 index c9ae2ec79cea..000000000000 --- a/drivers/staging/media/deprecated/saa7146/saa7146/TODO +++ /dev/null @@ -1,7 +0,0 @@ -The saa7146-based drivers are one of the few drivers still not using -the vb2 framework, so these drivers are now deprecated with the intent of -removing them altogether by the beginning of 2023. - -In order to keep these drivers they have to be converted to vb2. -If someone is interested in doing this work, then contact the -linux-media mailinglist (https://linuxtv.org/lists.php). diff --git a/drivers/staging/media/deprecated/saa7146/saa7146/hexium_gemini.c b/drivers/staging/media/deprecated/saa7146/saa7146/hexium_gemini.c deleted file mode 100644 index 124e82bd4507..000000000000 --- a/drivers/staging/media/deprecated/saa7146/saa7146/hexium_gemini.c +++ /dev/null @@ -1,425 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/* - hexium_gemini.c - v4l2 driver for Hexium Gemini frame grabber cards - - Visit http://www.mihu.de/linux/saa7146/ and follow the link - to "hexium" for further details about this card. - - Copyright (C) 2003 Michael Hunold - -*/ - -#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt - -#define DEBUG_VARIABLE debug - -#include -#include -#include "../common/saa7146_vv.h" - -static int debug; -module_param(debug, int, 0); -MODULE_PARM_DESC(debug, "debug verbosity"); - -/* global variables */ -static int hexium_num; - -#define HEXIUM_GEMINI 4 -#define HEXIUM_GEMINI_DUAL 5 - -#define HEXIUM_INPUTS 9 -static struct v4l2_input hexium_inputs[HEXIUM_INPUTS] = { - { 0, "CVBS 1", V4L2_INPUT_TYPE_CAMERA, 0, 0, V4L2_STD_ALL, 0, V4L2_IN_CAP_STD }, - { 1, "CVBS 2", V4L2_INPUT_TYPE_CAMERA, 0, 0, V4L2_STD_ALL, 0, V4L2_IN_CAP_STD }, - { 2, "CVBS 3", V4L2_INPUT_TYPE_CAMERA, 0, 0, V4L2_STD_ALL, 0, V4L2_IN_CAP_STD }, - { 3, "CVBS 4", V4L2_INPUT_TYPE_CAMERA, 0, 0, V4L2_STD_ALL, 0, V4L2_IN_CAP_STD }, - { 4, "CVBS 5", V4L2_INPUT_TYPE_CAMERA, 0, 0, V4L2_STD_ALL, 0, V4L2_IN_CAP_STD }, - { 5, "CVBS 6", V4L2_INPUT_TYPE_CAMERA, 0, 0, V4L2_STD_ALL, 0, V4L2_IN_CAP_STD }, - { 6, "Y/C 1", V4L2_INPUT_TYPE_CAMERA, 0, 0, V4L2_STD_ALL, 0, V4L2_IN_CAP_STD }, - { 7, "Y/C 2", V4L2_INPUT_TYPE_CAMERA, 0, 0, V4L2_STD_ALL, 0, V4L2_IN_CAP_STD }, - { 8, "Y/C 3", V4L2_INPUT_TYPE_CAMERA, 0, 0, V4L2_STD_ALL, 0, V4L2_IN_CAP_STD }, -}; - -#define HEXIUM_AUDIOS 0 - -struct hexium_data -{ - s8 adr; - u8 byte; -}; - -#define HEXIUM_GEMINI_V_1_0 1 -#define HEXIUM_GEMINI_DUAL_V_1_0 2 - -struct hexium -{ - int type; - - struct video_device video_dev; - struct i2c_adapter i2c_adapter; - - int cur_input; /* current input */ - v4l2_std_id cur_std; /* current standard */ -}; - -/* Samsung KS0127B decoder default registers */ -static u8 hexium_ks0127b[0x100]={ -/*00*/ 0x00,0x52,0x30,0x40,0x01,0x0C,0x2A,0x10, -/*08*/ 0x00,0x00,0x00,0x60,0x00,0x00,0x0F,0x06, -/*10*/ 0x00,0x00,0xE4,0xC0,0x00,0x00,0x00,0x00, -/*18*/ 0x14,0x9B,0xFE,0xFF,0xFC,0xFF,0x03,0x22, -/*20*/ 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, -/*28*/ 0x00,0x00,0x00,0x00,0x00,0x2C,0x9B,0x00, -/*30*/ 0x00,0x00,0x10,0x80,0x80,0x10,0x80,0x80, -/*38*/ 0x01,0x04,0x00,0x00,0x00,0x29,0xC0,0x00, -/*40*/ 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, -/*48*/ 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, -/*50*/ 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, -/*58*/ 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, -/*60*/ 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, -/*68*/ 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, -/*70*/ 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, -/*78*/ 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, -/*80*/ 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, -/*88*/ 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, -/*90*/ 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, -/*98*/ 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, -/*A0*/ 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, -/*A8*/ 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, -/*B0*/ 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, -/*B8*/ 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, -/*C0*/ 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, -/*C8*/ 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, -/*D0*/ 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, -/*D8*/ 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, -/*E0*/ 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, -/*E8*/ 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, -/*F0*/ 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, -/*F8*/ 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00 -}; - -static struct hexium_data hexium_pal[] = { - { 0x01, 0x52 }, { 0x12, 0x64 }, { 0x2D, 0x2C }, { 0x2E, 0x9B }, { -1 , 0xFF } -}; - -static struct hexium_data hexium_ntsc[] = { - { 0x01, 0x53 }, { 0x12, 0x04 }, { 0x2D, 0x23 }, { 0x2E, 0x81 }, { -1 , 0xFF } -}; - -static struct hexium_data hexium_secam[] = { - { 0x01, 0x52 }, { 0x12, 0x64 }, { 0x2D, 0x2C }, { 0x2E, 0x9B }, { -1 , 0xFF } -}; - -static struct hexium_data hexium_input_select[] = { - { 0x02, 0x60 }, - { 0x02, 0x64 }, - { 0x02, 0x61 }, - { 0x02, 0x65 }, - { 0x02, 0x62 }, - { 0x02, 0x66 }, - { 0x02, 0x68 }, - { 0x02, 0x69 }, - { 0x02, 0x6A }, -}; - -/* fixme: h_offset = 0 for Hexium Gemini *Dual*, which - are currently *not* supported*/ -static struct saa7146_standard hexium_standards[] = { - { - .name = "PAL", .id = V4L2_STD_PAL, - .v_offset = 28, .v_field = 288, - .h_offset = 1, .h_pixels = 680, - .v_max_out = 576, .h_max_out = 768, - }, { - .name = "NTSC", .id = V4L2_STD_NTSC, - .v_offset = 28, .v_field = 240, - .h_offset = 1, .h_pixels = 640, - .v_max_out = 480, .h_max_out = 640, - }, { - .name = "SECAM", .id = V4L2_STD_SECAM, - .v_offset = 28, .v_field = 288, - .h_offset = 1, .h_pixels = 720, - .v_max_out = 576, .h_max_out = 768, - } -}; - -/* bring hardware to a sane state. this has to be done, just in case someone - wants to capture from this device before it has been properly initialized. - the capture engine would badly fail, because no valid signal arrives on the - saa7146, thus leading to timeouts and stuff. */ -static int hexium_init_done(struct saa7146_dev *dev) -{ - struct hexium *hexium = (struct hexium *) dev->ext_priv; - union i2c_smbus_data data; - int i = 0; - - DEB_D("hexium_init_done called\n"); - - /* initialize the helper ics to useful values */ - for (i = 0; i < sizeof(hexium_ks0127b); i++) { - data.byte = hexium_ks0127b[i]; - if (0 != i2c_smbus_xfer(&hexium->i2c_adapter, 0x6c, 0, I2C_SMBUS_WRITE, i, I2C_SMBUS_BYTE_DATA, &data)) { - pr_err("hexium_init_done() failed for address 0x%02x\n", - i); - } - } - - return 0; -} - -static int hexium_set_input(struct hexium *hexium, int input) -{ - union i2c_smbus_data data; - - DEB_D("\n"); - - data.byte = hexium_input_select[input].byte; - if (0 != i2c_smbus_xfer(&hexium->i2c_adapter, 0x6c, 0, I2C_SMBUS_WRITE, hexium_input_select[input].adr, I2C_SMBUS_BYTE_DATA, &data)) { - return -1; - } - - return 0; -} - -static int hexium_set_standard(struct hexium *hexium, struct hexium_data *vdec) -{ - union i2c_smbus_data data; - int i = 0; - - DEB_D("\n"); - - while (vdec[i].adr != -1) { - data.byte = vdec[i].byte; - if (0 != i2c_smbus_xfer(&hexium->i2c_adapter, 0x6c, 0, I2C_SMBUS_WRITE, vdec[i].adr, I2C_SMBUS_BYTE_DATA, &data)) { - pr_err("hexium_init_done: hexium_set_standard() failed for address 0x%02x\n", - i); - return -1; - } - i++; - } - return 0; -} - -static int vidioc_enum_input(struct file *file, void *fh, struct v4l2_input *i) -{ - DEB_EE("VIDIOC_ENUMINPUT %d\n", i->index); - - if (i->index >= HEXIUM_INPUTS) - return -EINVAL; - - memcpy(i, &hexium_inputs[i->index], sizeof(struct v4l2_input)); - - DEB_D("v4l2_ioctl: VIDIOC_ENUMINPUT %d\n", i->index); - return 0; -} - -static int vidioc_g_input(struct file *file, void *fh, unsigned int *input) -{ - struct saa7146_dev *dev = ((struct saa7146_fh *)fh)->dev; - struct hexium *hexium = (struct hexium *) dev->ext_priv; - - *input = hexium->cur_input; - - DEB_D("VIDIOC_G_INPUT: %d\n", *input); - return 0; -} - -static int vidioc_s_input(struct file *file, void *fh, unsigned int input) -{ - struct saa7146_dev *dev = ((struct saa7146_fh *)fh)->dev; - struct hexium *hexium = (struct hexium *) dev->ext_priv; - - DEB_EE("VIDIOC_S_INPUT %d\n", input); - - if (input >= HEXIUM_INPUTS) - return -EINVAL; - - hexium->cur_input = input; - hexium_set_input(hexium, input); - return 0; -} - -static struct saa7146_ext_vv vv_data; - -/* this function only gets called when the probing was successful */ -static int hexium_attach(struct saa7146_dev *dev, struct saa7146_pci_extension_data *info) -{ - struct hexium *hexium; - int ret; - - DEB_EE("\n"); - - hexium = kzalloc(sizeof(*hexium), GFP_KERNEL); - if (!hexium) - return -ENOMEM; - - dev->ext_priv = hexium; - - /* enable i2c-port pins */ - saa7146_write(dev, MC1, (MASK_08 | MASK_24 | MASK_10 | MASK_26)); - - strscpy(hexium->i2c_adapter.name, "hexium gemini", - sizeof(hexium->i2c_adapter.name)); - saa7146_i2c_adapter_prepare(dev, &hexium->i2c_adapter, SAA7146_I2C_BUS_BIT_RATE_480); - if (i2c_add_adapter(&hexium->i2c_adapter) < 0) { - DEB_S("cannot register i2c-device. skipping.\n"); - kfree(hexium); - return -EFAULT; - } - - /* set HWControl GPIO number 2 */ - saa7146_setgpio(dev, 2, SAA7146_GPIO_OUTHI); - - saa7146_write(dev, DD1_INIT, 0x07000700); - saa7146_write(dev, DD1_STREAM_B, 0x00000000); - saa7146_write(dev, MC2, (MASK_09 | MASK_25 | MASK_10 | MASK_26)); - - /* the rest */ - hexium->cur_input = 0; - hexium_init_done(dev); - - hexium_set_standard(hexium, hexium_pal); - hexium->cur_std = V4L2_STD_PAL; - - hexium_set_input(hexium, 0); - hexium->cur_input = 0; - - ret = saa7146_vv_init(dev, &vv_data); - if (ret) { - i2c_del_adapter(&hexium->i2c_adapter); - kfree(hexium); - return ret; - } - - vv_data.vid_ops.vidioc_enum_input = vidioc_enum_input; - vv_data.vid_ops.vidioc_g_input = vidioc_g_input; - vv_data.vid_ops.vidioc_s_input = vidioc_s_input; - ret = saa7146_register_device(&hexium->video_dev, dev, "hexium gemini", VFL_TYPE_VIDEO); - if (ret < 0) { - pr_err("cannot register capture v4l2 device. skipping.\n"); - saa7146_vv_release(dev); - i2c_del_adapter(&hexium->i2c_adapter); - kfree(hexium); - return ret; - } - - pr_info("found 'hexium gemini' frame grabber-%d\n", hexium_num); - hexium_num++; - - return 0; -} - -static int hexium_detach(struct saa7146_dev *dev) -{ - struct hexium *hexium = (struct hexium *) dev->ext_priv; - - DEB_EE("dev:%p\n", dev); - - saa7146_unregister_device(&hexium->video_dev, dev); - saa7146_vv_release(dev); - - hexium_num--; - - i2c_del_adapter(&hexium->i2c_adapter); - kfree(hexium); - return 0; -} - -static int std_callback(struct saa7146_dev *dev, struct saa7146_standard *std) -{ - struct hexium *hexium = (struct hexium *) dev->ext_priv; - - if (V4L2_STD_PAL == std->id) { - hexium_set_standard(hexium, hexium_pal); - hexium->cur_std = V4L2_STD_PAL; - return 0; - } else if (V4L2_STD_NTSC == std->id) { - hexium_set_standard(hexium, hexium_ntsc); - hexium->cur_std = V4L2_STD_NTSC; - return 0; - } else if (V4L2_STD_SECAM == std->id) { - hexium_set_standard(hexium, hexium_secam); - hexium->cur_std = V4L2_STD_SECAM; - return 0; - } - - return -1; -} - -static struct saa7146_extension hexium_extension; - -static struct saa7146_pci_extension_data hexium_gemini_4bnc = { - .ext_priv = "Hexium Gemini (4 BNC)", - .ext = &hexium_extension, -}; - -static struct saa7146_pci_extension_data hexium_gemini_dual_4bnc = { - .ext_priv = "Hexium Gemini Dual (4 BNC)", - .ext = &hexium_extension, -}; - -static const struct pci_device_id pci_tbl[] = { - { - .vendor = PCI_VENDOR_ID_PHILIPS, - .device = PCI_DEVICE_ID_PHILIPS_SAA7146, - .subvendor = 0x17c8, - .subdevice = 0x2401, - .driver_data = (unsigned long) &hexium_gemini_4bnc, - }, - { - .vendor = PCI_VENDOR_ID_PHILIPS, - .device = PCI_DEVICE_ID_PHILIPS_SAA7146, - .subvendor = 0x17c8, - .subdevice = 0x2402, - .driver_data = (unsigned long) &hexium_gemini_dual_4bnc, - }, - { - .vendor = 0, - } -}; - -MODULE_DEVICE_TABLE(pci, pci_tbl); - -static struct saa7146_ext_vv vv_data = { - .inputs = HEXIUM_INPUTS, - .capabilities = 0, - .stds = &hexium_standards[0], - .num_stds = ARRAY_SIZE(hexium_standards), - .std_callback = &std_callback, -}; - -static struct saa7146_extension hexium_extension = { - .name = "hexium gemini", - .flags = SAA7146_USE_I2C_IRQ, - - .pci_tbl = &pci_tbl[0], - .module = THIS_MODULE, - - .attach = hexium_attach, - .detach = hexium_detach, - - .irq_mask = 0, - .irq_func = NULL, -}; - -static int __init hexium_init_module(void) -{ - if (0 != saa7146_register_extension(&hexium_extension)) { - DEB_S("failed to register extension\n"); - return -ENODEV; - } - - return 0; -} - -static void __exit hexium_cleanup_module(void) -{ - saa7146_unregister_extension(&hexium_extension); -} - -module_init(hexium_init_module); -module_exit(hexium_cleanup_module); - -MODULE_DESCRIPTION("video4linux-2 driver for Hexium Gemini frame grabber cards"); -MODULE_AUTHOR("Michael Hunold "); -MODULE_LICENSE("GPL"); diff --git a/drivers/staging/media/deprecated/saa7146/saa7146/hexium_orion.c b/drivers/staging/media/deprecated/saa7146/saa7146/hexium_orion.c deleted file mode 100644 index ebd63998ac79..000000000000 --- a/drivers/staging/media/deprecated/saa7146/saa7146/hexium_orion.c +++ /dev/null @@ -1,496 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/* - hexium_orion.c - v4l2 driver for the Hexium Orion frame grabber cards - - Visit http://www.mihu.de/linux/saa7146/ and follow the link - to "hexium" for further details about this card. - - Copyright (C) 2003 Michael Hunold - -*/ - -#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt - -#define DEBUG_VARIABLE debug - -#include -#include -#include "../common/saa7146_vv.h" - -static int debug; -module_param(debug, int, 0); -MODULE_PARM_DESC(debug, "debug verbosity"); - -/* global variables */ -static int hexium_num; - -#define HEXIUM_HV_PCI6_ORION 1 -#define HEXIUM_ORION_1SVHS_3BNC 2 -#define HEXIUM_ORION_4BNC 3 - -#define HEXIUM_INPUTS 9 -static struct v4l2_input hexium_inputs[HEXIUM_INPUTS] = { - { 0, "CVBS 1", V4L2_INPUT_TYPE_CAMERA, 0, 0, V4L2_STD_ALL, 0, V4L2_IN_CAP_STD }, - { 1, "CVBS 2", V4L2_INPUT_TYPE_CAMERA, 0, 0, V4L2_STD_ALL, 0, V4L2_IN_CAP_STD }, - { 2, "CVBS 3", V4L2_INPUT_TYPE_CAMERA, 0, 0, V4L2_STD_ALL, 0, V4L2_IN_CAP_STD }, - { 3, "CVBS 4", V4L2_INPUT_TYPE_CAMERA, 0, 0, V4L2_STD_ALL, 0, V4L2_IN_CAP_STD }, - { 4, "CVBS 5", V4L2_INPUT_TYPE_CAMERA, 0, 0, V4L2_STD_ALL, 0, V4L2_IN_CAP_STD }, - { 5, "CVBS 6", V4L2_INPUT_TYPE_CAMERA, 0, 0, V4L2_STD_ALL, 0, V4L2_IN_CAP_STD }, - { 6, "Y/C 1", V4L2_INPUT_TYPE_CAMERA, 0, 0, V4L2_STD_ALL, 0, V4L2_IN_CAP_STD }, - { 7, "Y/C 2", V4L2_INPUT_TYPE_CAMERA, 0, 0, V4L2_STD_ALL, 0, V4L2_IN_CAP_STD }, - { 8, "Y/C 3", V4L2_INPUT_TYPE_CAMERA, 0, 0, V4L2_STD_ALL, 0, V4L2_IN_CAP_STD }, -}; - -#define HEXIUM_AUDIOS 0 - -struct hexium_data -{ - s8 adr; - u8 byte; -}; - -struct hexium -{ - int type; - struct video_device video_dev; - struct i2c_adapter i2c_adapter; - - int cur_input; /* current input */ -}; - -/* Philips SAA7110 decoder default registers */ -static u8 hexium_saa7110[53]={ -/*00*/ 0x4C,0x3C,0x0D,0xEF,0xBD,0xF0,0x00,0x00, -/*08*/ 0xF8,0xF8,0x60,0x60,0x40,0x86,0x18,0x90, -/*10*/ 0x00,0x2C,0x40,0x46,0x42,0x1A,0xFF,0xDA, -/*18*/ 0xF0,0x8B,0x00,0x00,0x00,0x00,0x00,0x00, -/*20*/ 0xD9,0x17,0x40,0x41,0x80,0x41,0x80,0x4F, -/*28*/ 0xFE,0x01,0x0F,0x0F,0x03,0x01,0x81,0x03, -/*30*/ 0x44,0x75,0x01,0x8C,0x03 -}; - -static struct { - struct hexium_data data[8]; -} hexium_input_select[] = { -{ - { /* cvbs 1 */ - { 0x06, 0x00 }, - { 0x20, 0xD9 }, - { 0x21, 0x17 }, // 0x16, - { 0x22, 0x40 }, - { 0x2C, 0x03 }, - { 0x30, 0x44 }, - { 0x31, 0x75 }, // ?? - { 0x21, 0x16 }, // 0x03, - } -}, { - { /* cvbs 2 */ - { 0x06, 0x00 }, - { 0x20, 0x78 }, - { 0x21, 0x07 }, // 0x03, - { 0x22, 0xD2 }, - { 0x2C, 0x83 }, - { 0x30, 0x60 }, - { 0x31, 0xB5 }, // ? - { 0x21, 0x03 }, - } -}, { - { /* cvbs 3 */ - { 0x06, 0x00 }, - { 0x20, 0xBA }, - { 0x21, 0x07 }, // 0x05, - { 0x22, 0x91 }, - { 0x2C, 0x03 }, - { 0x30, 0x60 }, - { 0x31, 0xB5 }, // ?? - { 0x21, 0x05 }, // 0x03, - } -}, { - { /* cvbs 4 */ - { 0x06, 0x00 }, - { 0x20, 0xD8 }, - { 0x21, 0x17 }, // 0x16, - { 0x22, 0x40 }, - { 0x2C, 0x03 }, - { 0x30, 0x44 }, - { 0x31, 0x75 }, // ?? - { 0x21, 0x16 }, // 0x03, - } -}, { - { /* cvbs 5 */ - { 0x06, 0x00 }, - { 0x20, 0xB8 }, - { 0x21, 0x07 }, // 0x05, - { 0x22, 0x91 }, - { 0x2C, 0x03 }, - { 0x30, 0x60 }, - { 0x31, 0xB5 }, // ?? - { 0x21, 0x05 }, // 0x03, - } -}, { - { /* cvbs 6 */ - { 0x06, 0x00 }, - { 0x20, 0x7C }, - { 0x21, 0x07 }, // 0x03 - { 0x22, 0xD2 }, - { 0x2C, 0x83 }, - { 0x30, 0x60 }, - { 0x31, 0xB5 }, // ?? - { 0x21, 0x03 }, - } -}, { - { /* y/c 1 */ - { 0x06, 0x80 }, - { 0x20, 0x59 }, - { 0x21, 0x17 }, - { 0x22, 0x42 }, - { 0x2C, 0xA3 }, - { 0x30, 0x44 }, - { 0x31, 0x75 }, - { 0x21, 0x12 }, - } -}, { - { /* y/c 2 */ - { 0x06, 0x80 }, - { 0x20, 0x9A }, - { 0x21, 0x17 }, - { 0x22, 0xB1 }, - { 0x2C, 0x13 }, - { 0x30, 0x60 }, - { 0x31, 0xB5 }, - { 0x21, 0x14 }, - } -}, { - { /* y/c 3 */ - { 0x06, 0x80 }, - { 0x20, 0x3C }, - { 0x21, 0x27 }, - { 0x22, 0xC1 }, - { 0x2C, 0x23 }, - { 0x30, 0x44 }, - { 0x31, 0x75 }, - { 0x21, 0x21 }, - } -} -}; - -static struct saa7146_standard hexium_standards[] = { - { - .name = "PAL", .id = V4L2_STD_PAL, - .v_offset = 16, .v_field = 288, - .h_offset = 1, .h_pixels = 680, - .v_max_out = 576, .h_max_out = 768, - }, { - .name = "NTSC", .id = V4L2_STD_NTSC, - .v_offset = 16, .v_field = 240, - .h_offset = 1, .h_pixels = 640, - .v_max_out = 480, .h_max_out = 640, - }, { - .name = "SECAM", .id = V4L2_STD_SECAM, - .v_offset = 16, .v_field = 288, - .h_offset = 1, .h_pixels = 720, - .v_max_out = 576, .h_max_out = 768, - } -}; - -/* this is only called for old HV-PCI6/Orion cards - without eeprom */ -static int hexium_probe(struct saa7146_dev *dev) -{ - struct hexium *hexium = NULL; - union i2c_smbus_data data; - int err = 0; - - DEB_EE("\n"); - - /* there are no hexium orion cards with revision 0 saa7146s */ - if (0 == dev->revision) { - return -EFAULT; - } - - hexium = kzalloc(sizeof(*hexium), GFP_KERNEL); - if (!hexium) - return -ENOMEM; - - /* enable i2c-port pins */ - saa7146_write(dev, MC1, (MASK_08 | MASK_24 | MASK_10 | MASK_26)); - - saa7146_write(dev, DD1_INIT, 0x01000100); - saa7146_write(dev, DD1_STREAM_B, 0x00000000); - saa7146_write(dev, MC2, (MASK_09 | MASK_25 | MASK_10 | MASK_26)); - - strscpy(hexium->i2c_adapter.name, "hexium orion", - sizeof(hexium->i2c_adapter.name)); - saa7146_i2c_adapter_prepare(dev, &hexium->i2c_adapter, SAA7146_I2C_BUS_BIT_RATE_480); - if (i2c_add_adapter(&hexium->i2c_adapter) < 0) { - DEB_S("cannot register i2c-device. skipping.\n"); - kfree(hexium); - return -EFAULT; - } - - /* set SAA7110 control GPIO 0 */ - saa7146_setgpio(dev, 0, SAA7146_GPIO_OUTHI); - /* set HWControl GPIO number 2 */ - saa7146_setgpio(dev, 2, SAA7146_GPIO_OUTHI); - - mdelay(10); - - /* detect newer Hexium Orion cards by subsystem ids */ - if (0x17c8 == dev->pci->subsystem_vendor && 0x0101 == dev->pci->subsystem_device) { - pr_info("device is a Hexium Orion w/ 1 SVHS + 3 BNC inputs\n"); - /* we store the pointer in our private data field */ - dev->ext_priv = hexium; - hexium->type = HEXIUM_ORION_1SVHS_3BNC; - return 0; - } - - if (0x17c8 == dev->pci->subsystem_vendor && 0x2101 == dev->pci->subsystem_device) { - pr_info("device is a Hexium Orion w/ 4 BNC inputs\n"); - /* we store the pointer in our private data field */ - dev->ext_priv = hexium; - hexium->type = HEXIUM_ORION_4BNC; - return 0; - } - - /* check if this is an old hexium Orion card by looking at - a saa7110 at address 0x4e */ - err = i2c_smbus_xfer(&hexium->i2c_adapter, 0x4e, 0, I2C_SMBUS_READ, - 0x00, I2C_SMBUS_BYTE_DATA, &data); - if (err == 0) { - pr_info("device is a Hexium HV-PCI6/Orion (old)\n"); - /* we store the pointer in our private data field */ - dev->ext_priv = hexium; - hexium->type = HEXIUM_HV_PCI6_ORION; - return 0; - } - - i2c_del_adapter(&hexium->i2c_adapter); - kfree(hexium); - return -EFAULT; -} - -/* bring hardware to a sane state. this has to be done, just in case someone - wants to capture from this device before it has been properly initialized. - the capture engine would badly fail, because no valid signal arrives on the - saa7146, thus leading to timeouts and stuff. */ -static int hexium_init_done(struct saa7146_dev *dev) -{ - struct hexium *hexium = (struct hexium *) dev->ext_priv; - union i2c_smbus_data data; - int i = 0; - - DEB_D("hexium_init_done called\n"); - - /* initialize the helper ics to useful values */ - for (i = 0; i < sizeof(hexium_saa7110); i++) { - data.byte = hexium_saa7110[i]; - if (0 != i2c_smbus_xfer(&hexium->i2c_adapter, 0x4e, 0, I2C_SMBUS_WRITE, i, I2C_SMBUS_BYTE_DATA, &data)) { - pr_err("failed for address 0x%02x\n", i); - } - } - - return 0; -} - -static int hexium_set_input(struct hexium *hexium, int input) -{ - union i2c_smbus_data data; - int i = 0; - - DEB_D("\n"); - - for (i = 0; i < 8; i++) { - int adr = hexium_input_select[input].data[i].adr; - data.byte = hexium_input_select[input].data[i].byte; - if (0 != i2c_smbus_xfer(&hexium->i2c_adapter, 0x4e, 0, I2C_SMBUS_WRITE, adr, I2C_SMBUS_BYTE_DATA, &data)) { - return -1; - } - pr_debug("%d: 0x%02x => 0x%02x\n", input, adr, data.byte); - } - - return 0; -} - -static int vidioc_enum_input(struct file *file, void *fh, struct v4l2_input *i) -{ - DEB_EE("VIDIOC_ENUMINPUT %d\n", i->index); - - if (i->index >= HEXIUM_INPUTS) - return -EINVAL; - - memcpy(i, &hexium_inputs[i->index], sizeof(struct v4l2_input)); - - DEB_D("v4l2_ioctl: VIDIOC_ENUMINPUT %d\n", i->index); - return 0; -} - -static int vidioc_g_input(struct file *file, void *fh, unsigned int *input) -{ - struct saa7146_dev *dev = ((struct saa7146_fh *)fh)->dev; - struct hexium *hexium = (struct hexium *) dev->ext_priv; - - *input = hexium->cur_input; - - DEB_D("VIDIOC_G_INPUT: %d\n", *input); - return 0; -} - -static int vidioc_s_input(struct file *file, void *fh, unsigned int input) -{ - struct saa7146_dev *dev = ((struct saa7146_fh *)fh)->dev; - struct hexium *hexium = (struct hexium *) dev->ext_priv; - - if (input >= HEXIUM_INPUTS) - return -EINVAL; - - hexium->cur_input = input; - hexium_set_input(hexium, input); - - return 0; -} - -static struct saa7146_ext_vv vv_data; - -/* this function only gets called when the probing was successful */ -static int hexium_attach(struct saa7146_dev *dev, struct saa7146_pci_extension_data *info) -{ - struct hexium *hexium = (struct hexium *) dev->ext_priv; - int ret; - - DEB_EE("\n"); - - ret = saa7146_vv_init(dev, &vv_data); - if (ret) { - pr_err("Error in saa7146_vv_init()\n"); - return ret; - } - - vv_data.vid_ops.vidioc_enum_input = vidioc_enum_input; - vv_data.vid_ops.vidioc_g_input = vidioc_g_input; - vv_data.vid_ops.vidioc_s_input = vidioc_s_input; - if (0 != saa7146_register_device(&hexium->video_dev, dev, "hexium orion", VFL_TYPE_VIDEO)) { - pr_err("cannot register capture v4l2 device. skipping.\n"); - return -1; - } - - pr_err("found 'hexium orion' frame grabber-%d\n", hexium_num); - hexium_num++; - - /* the rest */ - hexium->cur_input = 0; - hexium_init_done(dev); - - return 0; -} - -static int hexium_detach(struct saa7146_dev *dev) -{ - struct hexium *hexium = (struct hexium *) dev->ext_priv; - - DEB_EE("dev:%p\n", dev); - - saa7146_unregister_device(&hexium->video_dev, dev); - saa7146_vv_release(dev); - - hexium_num--; - - i2c_del_adapter(&hexium->i2c_adapter); - kfree(hexium); - return 0; -} - -static int std_callback(struct saa7146_dev *dev, struct saa7146_standard *std) -{ - return 0; -} - -static struct saa7146_extension extension; - -static struct saa7146_pci_extension_data hexium_hv_pci6 = { - .ext_priv = "Hexium HV-PCI6 / Orion", - .ext = &extension, -}; - -static struct saa7146_pci_extension_data hexium_orion_1svhs_3bnc = { - .ext_priv = "Hexium HV-PCI6 / Orion (1 SVHS/3 BNC)", - .ext = &extension, -}; - -static struct saa7146_pci_extension_data hexium_orion_4bnc = { - .ext_priv = "Hexium HV-PCI6 / Orion (4 BNC)", - .ext = &extension, -}; - -static const struct pci_device_id pci_tbl[] = { - { - .vendor = PCI_VENDOR_ID_PHILIPS, - .device = PCI_DEVICE_ID_PHILIPS_SAA7146, - .subvendor = 0x0000, - .subdevice = 0x0000, - .driver_data = (unsigned long) &hexium_hv_pci6, - }, - { - .vendor = PCI_VENDOR_ID_PHILIPS, - .device = PCI_DEVICE_ID_PHILIPS_SAA7146, - .subvendor = 0x17c8, - .subdevice = 0x0101, - .driver_data = (unsigned long) &hexium_orion_1svhs_3bnc, - }, - { - .vendor = PCI_VENDOR_ID_PHILIPS, - .device = PCI_DEVICE_ID_PHILIPS_SAA7146, - .subvendor = 0x17c8, - .subdevice = 0x2101, - .driver_data = (unsigned long) &hexium_orion_4bnc, - }, - { - .vendor = 0, - } -}; - -MODULE_DEVICE_TABLE(pci, pci_tbl); - -static struct saa7146_ext_vv vv_data = { - .inputs = HEXIUM_INPUTS, - .capabilities = 0, - .stds = &hexium_standards[0], - .num_stds = ARRAY_SIZE(hexium_standards), - .std_callback = &std_callback, -}; - -static struct saa7146_extension extension = { - .name = "hexium HV-PCI6 Orion", - .flags = 0, // SAA7146_USE_I2C_IRQ, - - .pci_tbl = &pci_tbl[0], - .module = THIS_MODULE, - - .probe = hexium_probe, - .attach = hexium_attach, - .detach = hexium_detach, - - .irq_mask = 0, - .irq_func = NULL, -}; - -static int __init hexium_init_module(void) -{ - if (0 != saa7146_register_extension(&extension)) { - DEB_S("failed to register extension\n"); - return -ENODEV; - } - - return 0; -} - -static void __exit hexium_cleanup_module(void) -{ - saa7146_unregister_extension(&extension); -} - -module_init(hexium_init_module); -module_exit(hexium_cleanup_module); - -MODULE_DESCRIPTION("video4linux-2 driver for Hexium Orion frame grabber cards"); -MODULE_AUTHOR("Michael Hunold "); -MODULE_LICENSE("GPL"); diff --git a/drivers/staging/media/deprecated/saa7146/saa7146/mxb.c b/drivers/staging/media/deprecated/saa7146/saa7146/mxb.c deleted file mode 100644 index 3e568f952dae..000000000000 --- a/drivers/staging/media/deprecated/saa7146/saa7146/mxb.c +++ /dev/null @@ -1,873 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/* - mxb - v4l2 driver for the Multimedia eXtension Board - - Copyright (C) 1998-2006 Michael Hunold - - Visit http://www.themm.net/~mihu/linux/saa7146/mxb.html - for further details about this card. - -*/ - -#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt - -#define DEBUG_VARIABLE debug - -#include -#include -#include -#include -#include - -#include "../common/saa7146_vv.h" -#include "tea6415c.h" -#include "tea6420.h" - -#define MXB_AUDIOS 6 - -#define I2C_SAA7111A 0x24 -#define I2C_TDA9840 0x42 -#define I2C_TEA6415C 0x43 -#define I2C_TEA6420_1 0x4c -#define I2C_TEA6420_2 0x4d -#define I2C_TUNER 0x60 - -#define MXB_BOARD_CAN_DO_VBI(dev) (dev->revision != 0) - -/* global variable */ -static int mxb_num; - -/* initial frequence the tuner will be tuned to. - in verden (lower saxony, germany) 4148 is a - channel called "phoenix" */ -static int freq = 4148; -module_param(freq, int, 0644); -MODULE_PARM_DESC(freq, "initial frequency the tuner will be tuned to while setup"); - -static int debug; -module_param(debug, int, 0644); -MODULE_PARM_DESC(debug, "Turn on/off device debugging (default:off)."); - -#define MXB_INPUTS 4 -enum { TUNER, AUX1, AUX3, AUX3_YC }; - -static struct v4l2_input mxb_inputs[MXB_INPUTS] = { - { TUNER, "Tuner", V4L2_INPUT_TYPE_TUNER, 0x3f, 0, - V4L2_STD_PAL_BG | V4L2_STD_PAL_I, 0, V4L2_IN_CAP_STD }, - { AUX1, "AUX1", V4L2_INPUT_TYPE_CAMERA, 0x3f, 0, - V4L2_STD_ALL, 0, V4L2_IN_CAP_STD }, - { AUX3, "AUX3 Composite", V4L2_INPUT_TYPE_CAMERA, 0x3f, 0, - V4L2_STD_ALL, 0, V4L2_IN_CAP_STD }, - { AUX3_YC, "AUX3 S-Video", V4L2_INPUT_TYPE_CAMERA, 0x3f, 0, - V4L2_STD_ALL, 0, V4L2_IN_CAP_STD }, -}; - -/* this array holds the information, which port of the saa7146 each - input actually uses. the mxb uses port 0 for every input */ -static struct { - int hps_source; - int hps_sync; -} input_port_selection[MXB_INPUTS] = { - { SAA7146_HPS_SOURCE_PORT_A, SAA7146_HPS_SYNC_PORT_A }, - { SAA7146_HPS_SOURCE_PORT_A, SAA7146_HPS_SYNC_PORT_A }, - { SAA7146_HPS_SOURCE_PORT_A, SAA7146_HPS_SYNC_PORT_A }, - { SAA7146_HPS_SOURCE_PORT_A, SAA7146_HPS_SYNC_PORT_A }, -}; - -/* this array holds the information of the audio source (mxb_audios), - which has to be switched corresponding to the video source (mxb_channels) */ -static int video_audio_connect[MXB_INPUTS] = - { 0, 1, 3, 3 }; - -struct mxb_routing { - u32 input; - u32 output; -}; - -/* these are the available audio sources, which can switched - to the line- and cd-output individually */ -static struct v4l2_audio mxb_audios[MXB_AUDIOS] = { - { - .index = 0, - .name = "Tuner", - .capability = V4L2_AUDCAP_STEREO, - } , { - .index = 1, - .name = "AUX1", - .capability = V4L2_AUDCAP_STEREO, - } , { - .index = 2, - .name = "AUX2", - .capability = V4L2_AUDCAP_STEREO, - } , { - .index = 3, - .name = "AUX3", - .capability = V4L2_AUDCAP_STEREO, - } , { - .index = 4, - .name = "Radio (X9)", - .capability = V4L2_AUDCAP_STEREO, - } , { - .index = 5, - .name = "CD-ROM (X10)", - .capability = V4L2_AUDCAP_STEREO, - } -}; - -/* These are the necessary input-output-pins for bringing one audio source - (see above) to the CD-output. Note that gain is set to 0 in this table. */ -static struct mxb_routing TEA6420_cd[MXB_AUDIOS + 1][2] = { - { { 1, 1 }, { 1, 1 } }, /* Tuner */ - { { 5, 1 }, { 6, 1 } }, /* AUX 1 */ - { { 4, 1 }, { 6, 1 } }, /* AUX 2 */ - { { 3, 1 }, { 6, 1 } }, /* AUX 3 */ - { { 1, 1 }, { 3, 1 } }, /* Radio */ - { { 1, 1 }, { 2, 1 } }, /* CD-Rom */ - { { 6, 1 }, { 6, 1 } } /* Mute */ -}; - -/* These are the necessary input-output-pins for bringing one audio source - (see above) to the line-output. Note that gain is set to 0 in this table. */ -static struct mxb_routing TEA6420_line[MXB_AUDIOS + 1][2] = { - { { 2, 3 }, { 1, 2 } }, - { { 5, 3 }, { 6, 2 } }, - { { 4, 3 }, { 6, 2 } }, - { { 3, 3 }, { 6, 2 } }, - { { 2, 3 }, { 3, 2 } }, - { { 2, 3 }, { 2, 2 } }, - { { 6, 3 }, { 6, 2 } } /* Mute */ -}; - -struct mxb -{ - struct video_device video_dev; - struct video_device vbi_dev; - - struct i2c_adapter i2c_adapter; - - struct v4l2_subdev *saa7111a; - struct v4l2_subdev *tda9840; - struct v4l2_subdev *tea6415c; - struct v4l2_subdev *tuner; - struct v4l2_subdev *tea6420_1; - struct v4l2_subdev *tea6420_2; - - int cur_mode; /* current audio mode (mono, stereo, ...) */ - int cur_input; /* current input */ - int cur_audinput; /* current audio input */ - int cur_mute; /* current mute status */ - struct v4l2_frequency cur_freq; /* current frequency the tuner is tuned to */ -}; - -#define saa7111a_call(mxb, o, f, args...) \ - v4l2_subdev_call(mxb->saa7111a, o, f, ##args) -#define tda9840_call(mxb, o, f, args...) \ - v4l2_subdev_call(mxb->tda9840, o, f, ##args) -#define tea6415c_call(mxb, o, f, args...) \ - v4l2_subdev_call(mxb->tea6415c, o, f, ##args) -#define tuner_call(mxb, o, f, args...) \ - v4l2_subdev_call(mxb->tuner, o, f, ##args) -#define call_all(dev, o, f, args...) \ - v4l2_device_call_until_err(&dev->v4l2_dev, 0, o, f, ##args) - -static void mxb_update_audmode(struct mxb *mxb) -{ - struct v4l2_tuner t = { - .audmode = mxb->cur_mode, - }; - - tda9840_call(mxb, tuner, s_tuner, &t); -} - -static inline void tea6420_route(struct mxb *mxb, int idx) -{ - v4l2_subdev_call(mxb->tea6420_1, audio, s_routing, - TEA6420_cd[idx][0].input, TEA6420_cd[idx][0].output, 0); - v4l2_subdev_call(mxb->tea6420_2, audio, s_routing, - TEA6420_cd[idx][1].input, TEA6420_cd[idx][1].output, 0); - v4l2_subdev_call(mxb->tea6420_1, audio, s_routing, - TEA6420_line[idx][0].input, TEA6420_line[idx][0].output, 0); - v4l2_subdev_call(mxb->tea6420_2, audio, s_routing, - TEA6420_line[idx][1].input, TEA6420_line[idx][1].output, 0); -} - -static struct saa7146_extension extension; - -static int mxb_s_ctrl(struct v4l2_ctrl *ctrl) -{ - struct saa7146_dev *dev = container_of(ctrl->handler, - struct saa7146_dev, ctrl_handler); - struct mxb *mxb = dev->ext_priv; - - switch (ctrl->id) { - case V4L2_CID_AUDIO_MUTE: - mxb->cur_mute = ctrl->val; - /* switch the audio-source */ - tea6420_route(mxb, ctrl->val ? 6 : - video_audio_connect[mxb->cur_input]); - break; - default: - return -EINVAL; - } - return 0; -} - -static const struct v4l2_ctrl_ops mxb_ctrl_ops = { - .s_ctrl = mxb_s_ctrl, -}; - -static int mxb_probe(struct saa7146_dev *dev) -{ - struct v4l2_ctrl_handler *hdl = &dev->ctrl_handler; - struct mxb *mxb = NULL; - - v4l2_ctrl_new_std(hdl, &mxb_ctrl_ops, - V4L2_CID_AUDIO_MUTE, 0, 1, 1, 1); - if (hdl->error) - return hdl->error; - mxb = kzalloc(sizeof(struct mxb), GFP_KERNEL); - if (mxb == NULL) { - DEB_D("not enough kernel memory\n"); - return -ENOMEM; - } - - - snprintf(mxb->i2c_adapter.name, sizeof(mxb->i2c_adapter.name), "mxb%d", mxb_num); - - saa7146_i2c_adapter_prepare(dev, &mxb->i2c_adapter, SAA7146_I2C_BUS_BIT_RATE_480); - if (i2c_add_adapter(&mxb->i2c_adapter) < 0) { - DEB_S("cannot register i2c-device. skipping.\n"); - kfree(mxb); - return -EFAULT; - } - - mxb->saa7111a = v4l2_i2c_new_subdev(&dev->v4l2_dev, &mxb->i2c_adapter, - "saa7111", I2C_SAA7111A, NULL); - mxb->tea6420_1 = v4l2_i2c_new_subdev(&dev->v4l2_dev, &mxb->i2c_adapter, - "tea6420", I2C_TEA6420_1, NULL); - mxb->tea6420_2 = v4l2_i2c_new_subdev(&dev->v4l2_dev, &mxb->i2c_adapter, - "tea6420", I2C_TEA6420_2, NULL); - mxb->tea6415c = v4l2_i2c_new_subdev(&dev->v4l2_dev, &mxb->i2c_adapter, - "tea6415c", I2C_TEA6415C, NULL); - mxb->tda9840 = v4l2_i2c_new_subdev(&dev->v4l2_dev, &mxb->i2c_adapter, - "tda9840", I2C_TDA9840, NULL); - mxb->tuner = v4l2_i2c_new_subdev(&dev->v4l2_dev, &mxb->i2c_adapter, - "tuner", I2C_TUNER, NULL); - - /* check if all devices are present */ - if (!mxb->tea6420_1 || !mxb->tea6420_2 || !mxb->tea6415c || - !mxb->tda9840 || !mxb->saa7111a || !mxb->tuner) { - pr_err("did not find all i2c devices. aborting\n"); - i2c_del_adapter(&mxb->i2c_adapter); - kfree(mxb); - return -ENODEV; - } - - /* all devices are present, probe was successful */ - - /* we store the pointer in our private data field */ - dev->ext_priv = mxb; - - v4l2_ctrl_handler_setup(hdl); - - return 0; -} - -/* some init data for the saa7740, the so-called 'sound arena module'. - there are no specs available, so we simply use some init values */ -static struct { - int length; - char data[9]; -} mxb_saa7740_init[] = { - { 3, { 0x80, 0x00, 0x00 } },{ 3, { 0x80, 0x89, 0x00 } }, - { 3, { 0x80, 0xb0, 0x0a } },{ 3, { 0x00, 0x00, 0x00 } }, - { 3, { 0x49, 0x00, 0x00 } },{ 3, { 0x4a, 0x00, 0x00 } }, - { 3, { 0x4b, 0x00, 0x00 } },{ 3, { 0x4c, 0x00, 0x00 } }, - { 3, { 0x4d, 0x00, 0x00 } },{ 3, { 0x4e, 0x00, 0x00 } }, - { 3, { 0x4f, 0x00, 0x00 } },{ 3, { 0x50, 0x00, 0x00 } }, - { 3, { 0x51, 0x00, 0x00 } },{ 3, { 0x52, 0x00, 0x00 } }, - { 3, { 0x53, 0x00, 0x00 } },{ 3, { 0x54, 0x00, 0x00 } }, - { 3, { 0x55, 0x00, 0x00 } },{ 3, { 0x56, 0x00, 0x00 } }, - { 3, { 0x57, 0x00, 0x00 } },{ 3, { 0x58, 0x00, 0x00 } }, - { 3, { 0x59, 0x00, 0x00 } },{ 3, { 0x5a, 0x00, 0x00 } }, - { 3, { 0x5b, 0x00, 0x00 } },{ 3, { 0x5c, 0x00, 0x00 } }, - { 3, { 0x5d, 0x00, 0x00 } },{ 3, { 0x5e, 0x00, 0x00 } }, - { 3, { 0x5f, 0x00, 0x00 } },{ 3, { 0x60, 0x00, 0x00 } }, - { 3, { 0x61, 0x00, 0x00 } },{ 3, { 0x62, 0x00, 0x00 } }, - { 3, { 0x63, 0x00, 0x00 } },{ 3, { 0x64, 0x00, 0x00 } }, - { 3, { 0x65, 0x00, 0x00 } },{ 3, { 0x66, 0x00, 0x00 } }, - { 3, { 0x67, 0x00, 0x00 } },{ 3, { 0x68, 0x00, 0x00 } }, - { 3, { 0x69, 0x00, 0x00 } },{ 3, { 0x6a, 0x00, 0x00 } }, - { 3, { 0x6b, 0x00, 0x00 } },{ 3, { 0x6c, 0x00, 0x00 } }, - { 3, { 0x6d, 0x00, 0x00 } },{ 3, { 0x6e, 0x00, 0x00 } }, - { 3, { 0x6f, 0x00, 0x00 } },{ 3, { 0x70, 0x00, 0x00 } }, - { 3, { 0x71, 0x00, 0x00 } },{ 3, { 0x72, 0x00, 0x00 } }, - { 3, { 0x73, 0x00, 0x00 } },{ 3, { 0x74, 0x00, 0x00 } }, - { 3, { 0x75, 0x00, 0x00 } },{ 3, { 0x76, 0x00, 0x00 } }, - { 3, { 0x77, 0x00, 0x00 } },{ 3, { 0x41, 0x00, 0x42 } }, - { 3, { 0x42, 0x10, 0x42 } },{ 3, { 0x43, 0x20, 0x42 } }, - { 3, { 0x44, 0x30, 0x42 } },{ 3, { 0x45, 0x00, 0x01 } }, - { 3, { 0x46, 0x00, 0x01 } },{ 3, { 0x47, 0x00, 0x01 } }, - { 3, { 0x48, 0x00, 0x01 } }, - { 9, { 0x01, 0x03, 0xc5, 0x5c, 0x7a, 0x85, 0x01, 0x00, 0x54 } }, - { 9, { 0x21, 0x03, 0xc5, 0x5c, 0x7a, 0x85, 0x01, 0x00, 0x54 } }, - { 9, { 0x09, 0x0b, 0xb4, 0x6b, 0x74, 0x85, 0x95, 0x00, 0x34 } }, - { 9, { 0x29, 0x0b, 0xb4, 0x6b, 0x74, 0x85, 0x95, 0x00, 0x34 } }, - { 9, { 0x11, 0x17, 0x43, 0x62, 0x68, 0x89, 0xd1, 0xff, 0xb0 } }, - { 9, { 0x31, 0x17, 0x43, 0x62, 0x68, 0x89, 0xd1, 0xff, 0xb0 } }, - { 9, { 0x19, 0x20, 0x62, 0x51, 0x5a, 0x95, 0x19, 0x01, 0x50 } }, - { 9, { 0x39, 0x20, 0x62, 0x51, 0x5a, 0x95, 0x19, 0x01, 0x50 } }, - { 9, { 0x05, 0x3e, 0xd2, 0x69, 0x4e, 0x9a, 0x51, 0x00, 0xf0 } }, - { 9, { 0x25, 0x3e, 0xd2, 0x69, 0x4e, 0x9a, 0x51, 0x00, 0xf0 } }, - { 9, { 0x0d, 0x3d, 0xa1, 0x40, 0x7d, 0x9f, 0x29, 0xfe, 0x14 } }, - { 9, { 0x2d, 0x3d, 0xa1, 0x40, 0x7d, 0x9f, 0x29, 0xfe, 0x14 } }, - { 9, { 0x15, 0x73, 0xa1, 0x50, 0x5d, 0xa6, 0xf5, 0xfe, 0x38 } }, - { 9, { 0x35, 0x73, 0xa1, 0x50, 0x5d, 0xa6, 0xf5, 0xfe, 0x38 } }, - { 9, { 0x1d, 0xed, 0xd0, 0x68, 0x29, 0xb4, 0xe1, 0x00, 0xb8 } }, - { 9, { 0x3d, 0xed, 0xd0, 0x68, 0x29, 0xb4, 0xe1, 0x00, 0xb8 } }, - { 3, { 0x80, 0xb3, 0x0a } }, - {-1, { 0 } } -}; - -/* bring hardware to a sane state. this has to be done, just in case someone - wants to capture from this device before it has been properly initialized. - the capture engine would badly fail, because no valid signal arrives on the - saa7146, thus leading to timeouts and stuff. */ -static int mxb_init_done(struct saa7146_dev* dev) -{ - struct mxb* mxb = (struct mxb*)dev->ext_priv; - struct i2c_msg msg; - struct tuner_setup tun_setup; - v4l2_std_id std = V4L2_STD_PAL_BG; - - int i, err = 0; - - /* mute audio on tea6420s */ - tea6420_route(mxb, 6); - - /* select video mode in saa7111a */ - saa7111a_call(mxb, video, s_std, std); - - /* select tuner-output on saa7111a */ - saa7111a_call(mxb, video, s_routing, SAA7115_COMPOSITE0, - SAA7111_FMT_CCIR, 0); - - /* select a tuner type */ - tun_setup.mode_mask = T_ANALOG_TV; - tun_setup.addr = ADDR_UNSET; - tun_setup.type = TUNER_PHILIPS_PAL; - tuner_call(mxb, tuner, s_type_addr, &tun_setup); - /* tune in some frequency on tuner */ - mxb->cur_freq.tuner = 0; - mxb->cur_freq.type = V4L2_TUNER_ANALOG_TV; - mxb->cur_freq.frequency = freq; - tuner_call(mxb, tuner, s_frequency, &mxb->cur_freq); - - /* set a default video standard */ - /* These two gpio calls set the GPIO pins that control the tda9820 */ - saa7146_write(dev, GPIO_CTRL, 0x00404050); - saa7111a_call(mxb, core, s_gpio, 1); - saa7111a_call(mxb, video, s_std, std); - tuner_call(mxb, video, s_std, std); - - /* switch to tuner-channel on tea6415c */ - tea6415c_call(mxb, video, s_routing, 3, 17, 0); - - /* select tuner-output on multicable on tea6415c */ - tea6415c_call(mxb, video, s_routing, 3, 13, 0); - - /* the rest for mxb */ - mxb->cur_input = 0; - mxb->cur_audinput = video_audio_connect[mxb->cur_input]; - mxb->cur_mute = 1; - - mxb->cur_mode = V4L2_TUNER_MODE_STEREO; - mxb_update_audmode(mxb); - - /* check if the saa7740 (aka 'sound arena module') is present - on the mxb. if so, we must initialize it. due to lack of - information about the saa7740, the values were reverse - engineered. */ - msg.addr = 0x1b; - msg.flags = 0; - msg.len = mxb_saa7740_init[0].length; - msg.buf = &mxb_saa7740_init[0].data[0]; - - err = i2c_transfer(&mxb->i2c_adapter, &msg, 1); - if (err == 1) { - /* the sound arena module is a pos, that's probably the reason - philips refuses to hand out a datasheet for the saa7740... - it seems to screw up the i2c bus, so we disable fast irq - based i2c transactions here and rely on the slow and safe - polling method ... */ - extension.flags &= ~SAA7146_USE_I2C_IRQ; - for (i = 1; ; i++) { - if (-1 == mxb_saa7740_init[i].length) - break; - - msg.len = mxb_saa7740_init[i].length; - msg.buf = &mxb_saa7740_init[i].data[0]; - err = i2c_transfer(&mxb->i2c_adapter, &msg, 1); - if (err != 1) { - DEB_D("failed to initialize 'sound arena module'\n"); - goto err; - } - } - pr_info("'sound arena module' detected\n"); - } -err: - /* the rest for saa7146: you should definitely set some basic values - for the input-port handling of the saa7146. */ - - /* ext->saa has been filled by the core driver */ - - /* some stuff is done via variables */ - saa7146_set_hps_source_and_sync(dev, input_port_selection[mxb->cur_input].hps_source, - input_port_selection[mxb->cur_input].hps_sync); - - /* some stuff is done via direct write to the registers */ - - /* this is ugly, but because of the fact that this is completely - hardware dependend, it should be done directly... */ - saa7146_write(dev, DD1_STREAM_B, 0x00000000); - saa7146_write(dev, DD1_INIT, 0x02000200); - saa7146_write(dev, MC2, (MASK_09 | MASK_25 | MASK_10 | MASK_26)); - - return 0; -} - -/* interrupt-handler. this gets called when irq_mask is != 0. - it must clear the interrupt-bits in irq_mask it has handled */ -/* -void mxb_irq_bh(struct saa7146_dev* dev, u32* irq_mask) -{ - struct mxb* mxb = (struct mxb*)dev->ext_priv; -} -*/ - -static int vidioc_enum_input(struct file *file, void *fh, struct v4l2_input *i) -{ - DEB_EE("VIDIOC_ENUMINPUT %d\n", i->index); - if (i->index >= MXB_INPUTS) - return -EINVAL; - memcpy(i, &mxb_inputs[i->index], sizeof(struct v4l2_input)); - return 0; -} - -static int vidioc_g_input(struct file *file, void *fh, unsigned int *i) -{ - struct saa7146_dev *dev = ((struct saa7146_fh *)fh)->dev; - struct mxb *mxb = (struct mxb *)dev->ext_priv; - *i = mxb->cur_input; - - DEB_EE("VIDIOC_G_INPUT %d\n", *i); - return 0; -} - -static int vidioc_s_input(struct file *file, void *fh, unsigned int input) -{ - struct saa7146_dev *dev = ((struct saa7146_fh *)fh)->dev; - struct mxb *mxb = (struct mxb *)dev->ext_priv; - int err = 0; - int i = 0; - - DEB_EE("VIDIOC_S_INPUT %d\n", input); - - if (input >= MXB_INPUTS) - return -EINVAL; - - mxb->cur_input = input; - - saa7146_set_hps_source_and_sync(dev, input_port_selection[input].hps_source, - input_port_selection[input].hps_sync); - - /* prepare switching of tea6415c and saa7111a; - have a look at the 'background'-file for further information */ - switch (input) { - case TUNER: - i = SAA7115_COMPOSITE0; - - err = tea6415c_call(mxb, video, s_routing, 3, 17, 0); - - /* connect tuner-output always to multicable */ - if (!err) - err = tea6415c_call(mxb, video, s_routing, 3, 13, 0); - break; - case AUX3_YC: - /* nothing to be done here. aux3_yc is - directly connected to the saa711a */ - i = SAA7115_SVIDEO1; - break; - case AUX3: - /* nothing to be done here. aux3 is - directly connected to the saa711a */ - i = SAA7115_COMPOSITE1; - break; - case AUX1: - i = SAA7115_COMPOSITE0; - err = tea6415c_call(mxb, video, s_routing, 1, 17, 0); - break; - } - - if (err) - return err; - - /* switch video in saa7111a */ - if (saa7111a_call(mxb, video, s_routing, i, SAA7111_FMT_CCIR, 0)) - pr_err("VIDIOC_S_INPUT: could not address saa7111a\n"); - - mxb->cur_audinput = video_audio_connect[input]; - /* switch the audio-source only if necessary */ - if (0 == mxb->cur_mute) - tea6420_route(mxb, mxb->cur_audinput); - if (mxb->cur_audinput == 0) - mxb_update_audmode(mxb); - - return 0; -} - -static int vidioc_g_tuner(struct file *file, void *fh, struct v4l2_tuner *t) -{ - struct saa7146_dev *dev = ((struct saa7146_fh *)fh)->dev; - struct mxb *mxb = (struct mxb *)dev->ext_priv; - - if (t->index) { - DEB_D("VIDIOC_G_TUNER: channel %d does not have a tuner attached\n", - t->index); - return -EINVAL; - } - - DEB_EE("VIDIOC_G_TUNER: %d\n", t->index); - - memset(t, 0, sizeof(*t)); - strscpy(t->name, "TV Tuner", sizeof(t->name)); - t->type = V4L2_TUNER_ANALOG_TV; - t->capability = V4L2_TUNER_CAP_NORM | V4L2_TUNER_CAP_STEREO | - V4L2_TUNER_CAP_LANG1 | V4L2_TUNER_CAP_LANG2 | V4L2_TUNER_CAP_SAP; - t->audmode = mxb->cur_mode; - return call_all(dev, tuner, g_tuner, t); -} - -static int vidioc_s_tuner(struct file *file, void *fh, const struct v4l2_tuner *t) -{ - struct saa7146_dev *dev = ((struct saa7146_fh *)fh)->dev; - struct mxb *mxb = (struct mxb *)dev->ext_priv; - - if (t->index) { - DEB_D("VIDIOC_S_TUNER: channel %d does not have a tuner attached\n", - t->index); - return -EINVAL; - } - - mxb->cur_mode = t->audmode; - return call_all(dev, tuner, s_tuner, t); -} - -static int vidioc_querystd(struct file *file, void *fh, v4l2_std_id *norm) -{ - struct saa7146_dev *dev = ((struct saa7146_fh *)fh)->dev; - - return call_all(dev, video, querystd, norm); -} - -static int vidioc_g_frequency(struct file *file, void *fh, struct v4l2_frequency *f) -{ - struct saa7146_dev *dev = ((struct saa7146_fh *)fh)->dev; - struct mxb *mxb = (struct mxb *)dev->ext_priv; - - if (f->tuner) - return -EINVAL; - *f = mxb->cur_freq; - - DEB_EE("VIDIOC_G_FREQ: freq:0x%08x\n", mxb->cur_freq.frequency); - return 0; -} - -static int vidioc_s_frequency(struct file *file, void *fh, const struct v4l2_frequency *f) -{ - struct saa7146_dev *dev = ((struct saa7146_fh *)fh)->dev; - struct mxb *mxb = (struct mxb *)dev->ext_priv; - struct saa7146_vv *vv = dev->vv_data; - - if (f->tuner) - return -EINVAL; - - if (V4L2_TUNER_ANALOG_TV != f->type) - return -EINVAL; - - DEB_EE("VIDIOC_S_FREQUENCY: freq:0x%08x\n", mxb->cur_freq.frequency); - - /* tune in desired frequency */ - tuner_call(mxb, tuner, s_frequency, f); - /* let the tuner subdev clamp the frequency to the tuner range */ - mxb->cur_freq = *f; - tuner_call(mxb, tuner, g_frequency, &mxb->cur_freq); - if (mxb->cur_audinput == 0) - mxb_update_audmode(mxb); - - if (mxb->cur_input) - return 0; - - /* hack: changing the frequency should invalidate the vbi-counter (=> alevt) */ - spin_lock(&dev->slock); - vv->vbi_fieldcount = 0; - spin_unlock(&dev->slock); - - return 0; -} - -static int vidioc_enumaudio(struct file *file, void *fh, struct v4l2_audio *a) -{ - if (a->index >= MXB_AUDIOS) - return -EINVAL; - *a = mxb_audios[a->index]; - return 0; -} - -static int vidioc_g_audio(struct file *file, void *fh, struct v4l2_audio *a) -{ - struct saa7146_dev *dev = ((struct saa7146_fh *)fh)->dev; - struct mxb *mxb = (struct mxb *)dev->ext_priv; - - DEB_EE("VIDIOC_G_AUDIO\n"); - *a = mxb_audios[mxb->cur_audinput]; - return 0; -} - -static int vidioc_s_audio(struct file *file, void *fh, const struct v4l2_audio *a) -{ - struct saa7146_dev *dev = ((struct saa7146_fh *)fh)->dev; - struct mxb *mxb = (struct mxb *)dev->ext_priv; - - DEB_D("VIDIOC_S_AUDIO %d\n", a->index); - if (a->index >= 32 || - !(mxb_inputs[mxb->cur_input].audioset & (1 << a->index))) - return -EINVAL; - - if (mxb->cur_audinput != a->index) { - mxb->cur_audinput = a->index; - tea6420_route(mxb, a->index); - if (mxb->cur_audinput == 0) - mxb_update_audmode(mxb); - } - return 0; -} - -#ifdef CONFIG_VIDEO_ADV_DEBUG -static int vidioc_g_register(struct file *file, void *fh, struct v4l2_dbg_register *reg) -{ - struct saa7146_dev *dev = ((struct saa7146_fh *)fh)->dev; - - if (reg->reg > pci_resource_len(dev->pci, 0) - 4) - return -EINVAL; - reg->val = saa7146_read(dev, reg->reg); - reg->size = 4; - return 0; -} - -static int vidioc_s_register(struct file *file, void *fh, const struct v4l2_dbg_register *reg) -{ - struct saa7146_dev *dev = ((struct saa7146_fh *)fh)->dev; - - if (reg->reg > pci_resource_len(dev->pci, 0) - 4) - return -EINVAL; - saa7146_write(dev, reg->reg, reg->val); - return 0; -} -#endif - -static struct saa7146_ext_vv vv_data; - -/* this function only gets called when the probing was successful */ -static int mxb_attach(struct saa7146_dev *dev, struct saa7146_pci_extension_data *info) -{ - struct mxb *mxb; - int ret; - - DEB_EE("dev:%p\n", dev); - - ret = saa7146_vv_init(dev, &vv_data); - if (ret) { - ERR("Error in saa7146_vv_init()"); - return ret; - } - - if (mxb_probe(dev)) { - saa7146_vv_release(dev); - return -1; - } - mxb = (struct mxb *)dev->ext_priv; - - vv_data.vid_ops.vidioc_enum_input = vidioc_enum_input; - vv_data.vid_ops.vidioc_g_input = vidioc_g_input; - vv_data.vid_ops.vidioc_s_input = vidioc_s_input; - vv_data.vid_ops.vidioc_querystd = vidioc_querystd; - vv_data.vid_ops.vidioc_g_tuner = vidioc_g_tuner; - vv_data.vid_ops.vidioc_s_tuner = vidioc_s_tuner; - vv_data.vid_ops.vidioc_g_frequency = vidioc_g_frequency; - vv_data.vid_ops.vidioc_s_frequency = vidioc_s_frequency; - vv_data.vid_ops.vidioc_enumaudio = vidioc_enumaudio; - vv_data.vid_ops.vidioc_g_audio = vidioc_g_audio; - vv_data.vid_ops.vidioc_s_audio = vidioc_s_audio; -#ifdef CONFIG_VIDEO_ADV_DEBUG - vv_data.vid_ops.vidioc_g_register = vidioc_g_register; - vv_data.vid_ops.vidioc_s_register = vidioc_s_register; -#endif - if (saa7146_register_device(&mxb->video_dev, dev, "mxb", VFL_TYPE_VIDEO)) { - ERR("cannot register capture v4l2 device. skipping.\n"); - saa7146_vv_release(dev); - return -1; - } - - /* initialization stuff (vbi) (only for revision > 0 and for extensions which want it)*/ - if (MXB_BOARD_CAN_DO_VBI(dev)) { - if (saa7146_register_device(&mxb->vbi_dev, dev, "mxb", VFL_TYPE_VBI)) { - ERR("cannot register vbi v4l2 device. skipping.\n"); - } - } - - pr_info("found Multimedia eXtension Board #%d\n", mxb_num); - - mxb_num++; - mxb_init_done(dev); - return 0; -} - -static int mxb_detach(struct saa7146_dev *dev) -{ - struct mxb *mxb = (struct mxb *)dev->ext_priv; - - DEB_EE("dev:%p\n", dev); - - /* mute audio on tea6420s */ - tea6420_route(mxb, 6); - - saa7146_unregister_device(&mxb->video_dev,dev); - if (MXB_BOARD_CAN_DO_VBI(dev)) - saa7146_unregister_device(&mxb->vbi_dev, dev); - saa7146_vv_release(dev); - - mxb_num--; - - i2c_del_adapter(&mxb->i2c_adapter); - kfree(mxb); - - return 0; -} - -static int std_callback(struct saa7146_dev *dev, struct saa7146_standard *standard) -{ - struct mxb *mxb = (struct mxb *)dev->ext_priv; - - if (V4L2_STD_PAL_I == standard->id) { - v4l2_std_id std = V4L2_STD_PAL_I; - - DEB_D("VIDIOC_S_STD: setting mxb for PAL_I\n"); - /* These two gpio calls set the GPIO pins that control the tda9820 */ - saa7146_write(dev, GPIO_CTRL, 0x00404050); - saa7111a_call(mxb, core, s_gpio, 0); - saa7111a_call(mxb, video, s_std, std); - if (mxb->cur_input == 0) - tuner_call(mxb, video, s_std, std); - } else { - v4l2_std_id std = V4L2_STD_PAL_BG; - - if (mxb->cur_input) - std = standard->id; - DEB_D("VIDIOC_S_STD: setting mxb for PAL/NTSC/SECAM\n"); - /* These two gpio calls set the GPIO pins that control the tda9820 */ - saa7146_write(dev, GPIO_CTRL, 0x00404050); - saa7111a_call(mxb, core, s_gpio, 1); - saa7111a_call(mxb, video, s_std, std); - if (mxb->cur_input == 0) - tuner_call(mxb, video, s_std, std); - } - return 0; -} - -static struct saa7146_standard standard[] = { - { - .name = "PAL-BG", .id = V4L2_STD_PAL_BG, - .v_offset = 0x17, .v_field = 288, - .h_offset = 0x14, .h_pixels = 680, - .v_max_out = 576, .h_max_out = 768, - }, { - .name = "PAL-I", .id = V4L2_STD_PAL_I, - .v_offset = 0x17, .v_field = 288, - .h_offset = 0x14, .h_pixels = 680, - .v_max_out = 576, .h_max_out = 768, - }, { - .name = "NTSC", .id = V4L2_STD_NTSC, - .v_offset = 0x16, .v_field = 240, - .h_offset = 0x06, .h_pixels = 708, - .v_max_out = 480, .h_max_out = 640, - }, { - .name = "SECAM", .id = V4L2_STD_SECAM, - .v_offset = 0x14, .v_field = 288, - .h_offset = 0x14, .h_pixels = 720, - .v_max_out = 576, .h_max_out = 768, - } -}; - -static struct saa7146_pci_extension_data mxb = { - .ext_priv = "Multimedia eXtension Board", - .ext = &extension, -}; - -static const struct pci_device_id pci_tbl[] = { - { - .vendor = PCI_VENDOR_ID_PHILIPS, - .device = PCI_DEVICE_ID_PHILIPS_SAA7146, - .subvendor = 0x0000, - .subdevice = 0x0000, - .driver_data = (unsigned long)&mxb, - }, { - .vendor = 0, - } -}; - -MODULE_DEVICE_TABLE(pci, pci_tbl); - -static struct saa7146_ext_vv vv_data = { - .inputs = MXB_INPUTS, - .capabilities = V4L2_CAP_TUNER | V4L2_CAP_VBI_CAPTURE | V4L2_CAP_AUDIO, - .stds = &standard[0], - .num_stds = ARRAY_SIZE(standard), - .std_callback = &std_callback, -}; - -static struct saa7146_extension extension = { - .name = "Multimedia eXtension Board", - .flags = SAA7146_USE_I2C_IRQ, - - .pci_tbl = &pci_tbl[0], - .module = THIS_MODULE, - - .attach = mxb_attach, - .detach = mxb_detach, - - .irq_mask = 0, - .irq_func = NULL, -}; - -static int __init mxb_init_module(void) -{ - if (saa7146_register_extension(&extension)) { - DEB_S("failed to register extension\n"); - return -ENODEV; - } - - return 0; -} - -static void __exit mxb_cleanup_module(void) -{ - saa7146_unregister_extension(&extension); -} - -module_init(mxb_init_module); -module_exit(mxb_cleanup_module); - -MODULE_DESCRIPTION("video4linux-2 driver for the Siemens-Nixdorf 'Multimedia eXtension board'"); -MODULE_AUTHOR("Michael Hunold "); -MODULE_LICENSE("GPL"); From patchwork Wed Jan 11 10:52:56 2023 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Hans Verkuil X-Patchwork-Id: 13096404 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id EA7C0C67871 for ; Wed, 11 Jan 2023 10:54:18 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S238726AbjAKKxx (ORCPT ); Wed, 11 Jan 2023 05:53:53 -0500 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:37266 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S238134AbjAKKxR (ORCPT ); Wed, 11 Jan 2023 05:53:17 -0500 Received: from ams.source.kernel.org (ams.source.kernel.org [IPv6:2604:1380:4601:e00::1]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 211822603 for ; Wed, 11 Jan 2023 02:53:16 -0800 (PST) Received: from smtp.kernel.org (relay.kernel.org [52.25.139.140]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by ams.source.kernel.org (Postfix) with ESMTPS id BA57AB81BAD for ; Wed, 11 Jan 2023 10:53:15 +0000 (UTC) Received: by smtp.kernel.org (Postfix) with ESMTPSA id AE5F3C433D2; Wed, 11 Jan 2023 10:53:13 +0000 (UTC) From: Hans Verkuil To: linux-media@vger.kernel.org Cc: Lad Prabhakar , Hans Verkuil Subject: [PATCH 11/13] dvbdev.h: remove DVB_DEVICE_VIDEO/AUDIO/OSD Date: Wed, 11 Jan 2023 11:52:56 +0100 Message-Id: <20230111105258.547471-12-hverkuil-cisco@xs4all.nl> X-Mailer: git-send-email 2.39.0 In-Reply-To: <20230111105258.547471-1-hverkuil-cisco@xs4all.nl> References: <20230111105258.547471-1-hverkuil-cisco@xs4all.nl> MIME-Version: 1.0 Precedence: bulk List-ID: X-Mailing-List: linux-media@vger.kernel.org Now that the av7110 driver has been removed, we can also remove these old defines. Signed-off-by: Hans Verkuil --- Documentation/admin-guide/media/dvb_intro.rst | 8 +------- drivers/media/dvb-core/dvbdev.c | 6 ------ include/media/dvbdev.h | 11 ----------- 3 files changed, 1 insertion(+), 24 deletions(-) diff --git a/Documentation/admin-guide/media/dvb_intro.rst b/Documentation/admin-guide/media/dvb_intro.rst index 44eac9b3be6c..392fd7e247cc 100644 --- a/Documentation/admin-guide/media/dvb_intro.rst +++ b/Documentation/admin-guide/media/dvb_intro.rst @@ -77,15 +77,9 @@ Depending on the card's feature set, the Device Driver API could also expose other device nodes: * /dev/dvb/adapter0/ca0 -* /dev/dvb/adapter0/audio0 * /dev/dvb/adapter0/net0 -* /dev/dvb/adapter0/osd0 -* /dev/dvb/adapter0/video0 -The ``/dev/dvb/adapter0/ca0`` is used to decode encrypted channels. The -other device nodes are found only on devices that use the av7110 -driver, with is now obsoleted, together with the extra API whose such -devices use. +The ``/dev/dvb/adapter0/ca0`` is used to decode encrypted channels. Receiving a digital TV channel ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ diff --git a/drivers/media/dvb-core/dvbdev.c b/drivers/media/dvb-core/dvbdev.c index 0ed087caf7f3..04ea6e4f0f3c 100644 --- a/drivers/media/dvb-core/dvbdev.c +++ b/drivers/media/dvb-core/dvbdev.c @@ -42,15 +42,12 @@ static LIST_HEAD(dvb_adapter_list); static DEFINE_MUTEX(dvbdev_register_lock); static const char * const dnames[] = { - [DVB_DEVICE_VIDEO] = "video", - [DVB_DEVICE_AUDIO] = "audio", [DVB_DEVICE_SEC] = "sec", [DVB_DEVICE_FRONTEND] = "frontend", [DVB_DEVICE_DEMUX] = "demux", [DVB_DEVICE_DVR] = "dvr", [DVB_DEVICE_CA] = "ca", [DVB_DEVICE_NET] = "net", - [DVB_DEVICE_OSD] = "osd" }; #ifdef CONFIG_DVB_DYNAMIC_MINORS @@ -60,15 +57,12 @@ static const char * const dnames[] = { #define DVB_MAX_IDS 4 static const u8 minor_type[] = { - [DVB_DEVICE_VIDEO] = 0, - [DVB_DEVICE_AUDIO] = 1, [DVB_DEVICE_SEC] = 2, [DVB_DEVICE_FRONTEND] = 3, [DVB_DEVICE_DEMUX] = 4, [DVB_DEVICE_DVR] = 5, [DVB_DEVICE_CA] = 6, [DVB_DEVICE_NET] = 7, - [DVB_DEVICE_OSD] = 8, }; #define nums2minor(num, type, id) \ diff --git a/include/media/dvbdev.h b/include/media/dvbdev.h index 29d25c8a6f13..d5fc1a1986e7 100644 --- a/include/media/dvbdev.h +++ b/include/media/dvbdev.h @@ -46,13 +46,6 @@ * @DVB_DEVICE_DVR: Digital TV digital video record (DVR). * @DVB_DEVICE_CA: Digital TV Conditional Access (CA). * @DVB_DEVICE_NET: Digital TV network. - * - * @DVB_DEVICE_VIDEO: Digital TV video decoder. - * Deprecated. Used only on av7110-av. - * @DVB_DEVICE_AUDIO: Digital TV audio decoder. - * Deprecated. Used only on av7110-av. - * @DVB_DEVICE_OSD: Digital TV On Screen Display (OSD). - * Deprecated. Used only on av7110. */ enum dvb_device_type { DVB_DEVICE_SEC, @@ -61,10 +54,6 @@ enum dvb_device_type { DVB_DEVICE_DVR, DVB_DEVICE_CA, DVB_DEVICE_NET, - - DVB_DEVICE_VIDEO, - DVB_DEVICE_AUDIO, - DVB_DEVICE_OSD, }; #define DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr) \ From patchwork Wed Jan 11 10:52:57 2023 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Hans Verkuil X-Patchwork-Id: 13096406 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id 26DD8C678D5 for ; Wed, 11 Jan 2023 10:54:19 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S238786AbjAKKx5 (ORCPT ); Wed, 11 Jan 2023 05:53:57 -0500 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:37372 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S238513AbjAKKxW (ORCPT ); Wed, 11 Jan 2023 05:53:22 -0500 Received: from ams.source.kernel.org (ams.source.kernel.org [IPv6:2604:1380:4601:e00::1]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 3655A25C2 for ; Wed, 11 Jan 2023 02:53:18 -0800 (PST) Received: from smtp.kernel.org (relay.kernel.org [52.25.139.140]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by ams.source.kernel.org (Postfix) with ESMTPS id E7824B81BB3 for ; Wed, 11 Jan 2023 10:53:16 +0000 (UTC) Received: by smtp.kernel.org (Postfix) with ESMTPSA id D4628C433F0; Wed, 11 Jan 2023 10:53:14 +0000 (UTC) From: Hans Verkuil To: linux-media@vger.kernel.org Cc: Lad Prabhakar , Hans Verkuil Subject: [PATCH 12/13] dvb_demux.h: remove av7110-private fields Date: Wed, 11 Jan 2023 11:52:57 +0100 Message-Id: <20230111105258.547471-13-hverkuil-cisco@xs4all.nl> X-Mailer: git-send-email 2.39.0 In-Reply-To: <20230111105258.547471-1-hverkuil-cisco@xs4all.nl> References: <20230111105258.547471-1-hverkuil-cisco@xs4all.nl> MIME-Version: 1.0 Precedence: bulk List-ID: X-Mailing-List: linux-media@vger.kernel.org This driver has been removed, so we can remove these private fields as well. Signed-off-by: Hans Verkuil --- drivers/media/dvb-core/dvb_demux.c | 2 -- include/media/dvb_demux.h | 7 ------- 2 files changed, 9 deletions(-) diff --git a/drivers/media/dvb-core/dvb_demux.c b/drivers/media/dvb-core/dvb_demux.c index 398c86279b5b..b380da460295 100644 --- a/drivers/media/dvb-core/dvb_demux.c +++ b/drivers/media/dvb-core/dvb_demux.c @@ -1273,8 +1273,6 @@ int dvb_dmx_init(struct dvb_demux *dvbdemux) INIT_LIST_HEAD(&dvbdemux->feed_list); - dvbdemux->playing = 0; - dvbdemux->recording = 0; dvbdemux->tsbufp = 0; if (!dvbdemux->check_crc32) diff --git a/include/media/dvb_demux.h b/include/media/dvb_demux.h index 3b6aeca7a49e..1580de3dbc80 100644 --- a/include/media/dvb_demux.h +++ b/include/media/dvb_demux.h @@ -86,9 +86,6 @@ struct dvb_demux_filter { int index; enum dvb_dmx_state state; enum dvb_dmx_filter_type type; - - /* private: used only by av7110 */ - u16 hw_handle; }; /** @@ -235,10 +232,6 @@ struct dvb_demux { ktime_t speed_last_time; /* for TS speed check */ uint32_t speed_pkts_cnt; /* for TS speed check */ - - /* private: used only on av7110 */ - int playing; - int recording; }; /** From patchwork Wed Jan 11 10:52:58 2023 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Hans Verkuil X-Patchwork-Id: 13096405 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id 3B5D2C678D7 for ; Wed, 11 Jan 2023 10:54:19 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S238826AbjAKKx7 (ORCPT ); Wed, 11 Jan 2023 05:53:59 -0500 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:37370 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S238461AbjAKKxW (ORCPT ); Wed, 11 Jan 2023 05:53:22 -0500 Received: from dfw.source.kernel.org (dfw.source.kernel.org [139.178.84.217]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id CC10B25EF for ; Wed, 11 Jan 2023 02:53:17 -0800 (PST) Received: from smtp.kernel.org (relay.kernel.org [52.25.139.140]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by dfw.source.kernel.org (Postfix) with ESMTPS id 59A5461BBB for ; Wed, 11 Jan 2023 10:53:17 +0000 (UTC) Received: by smtp.kernel.org (Postfix) with ESMTPSA id 061B9C433EF; Wed, 11 Jan 2023 10:53:15 +0000 (UTC) From: Hans Verkuil To: linux-media@vger.kernel.org Cc: Lad Prabhakar , Hans Verkuil Subject: [PATCH 13/13] dvb_demux.h: remove write_to_decoder Date: Wed, 11 Jan 2023 11:52:58 +0100 Message-Id: <20230111105258.547471-14-hverkuil-cisco@xs4all.nl> X-Mailer: git-send-email 2.39.0 In-Reply-To: <20230111105258.547471-1-hverkuil-cisco@xs4all.nl> References: <20230111105258.547471-1-hverkuil-cisco@xs4all.nl> MIME-Version: 1.0 Precedence: bulk List-ID: X-Mailing-List: linux-media@vger.kernel.org This callback was only used by av7110, and that driver has now been removed, so remove this callback as well. Signed-off-by: Hans Verkuil --- drivers/media/common/b2c2/flexcop.c | 1 - drivers/media/dvb-core/dvb_demux.c | 4 ---- drivers/media/firewire/firedtv-dvb.c | 1 - drivers/media/pci/bt8xx/dvb-bt8xx.c | 1 - drivers/media/pci/mantis/mantis_dvb.c | 1 - drivers/media/pci/ngene/ngene-dvb.c | 1 - drivers/media/pci/pt1/pt1.c | 1 - drivers/media/pci/smipcie/smipcie-main.c | 1 - drivers/media/platform/st/sti/c8sectpfe/c8sectpfe-common.c | 1 - drivers/media/usb/dvb-usb-v2/dvb_usb_core.c | 1 - drivers/media/usb/dvb-usb/dvb-usb-dvb.c | 1 - drivers/media/usb/pvrusb2/pvrusb2-dvb.c | 1 - drivers/media/usb/ttusb-budget/dvb-ttusb-budget.c | 1 - drivers/media/usb/ttusb-dec/ttusb_dec.c | 1 - include/media/dvb_demux.h | 6 ------ 15 files changed, 23 deletions(-) diff --git a/drivers/media/common/b2c2/flexcop.c b/drivers/media/common/b2c2/flexcop.c index e7a88a2d248c..18a13c4625da 100644 --- a/drivers/media/common/b2c2/flexcop.c +++ b/drivers/media/common/b2c2/flexcop.c @@ -71,7 +71,6 @@ static int flexcop_dvb_init(struct flexcop_device *fc) fc->demux.filternum = fc->demux.feednum = FC_MAX_FEED; fc->demux.start_feed = flexcop_dvb_start_feed; fc->demux.stop_feed = flexcop_dvb_stop_feed; - fc->demux.write_to_decoder = NULL; ret = dvb_dmx_init(&fc->demux); if (ret < 0) { diff --git a/drivers/media/dvb-core/dvb_demux.c b/drivers/media/dvb-core/dvb_demux.c index b380da460295..5c48dcc0f05d 100644 --- a/drivers/media/dvb-core/dvb_demux.c +++ b/drivers/media/dvb-core/dvb_demux.c @@ -379,10 +379,6 @@ static inline void dvb_dmx_swfilter_packet_type(struct dvb_demux_feed *feed, feed->cb.ts(buf, 188, NULL, 0, &feed->feed.ts, &feed->buffer_flags); } - /* Used only on full-featured devices */ - if (feed->ts_type & TS_DECODER) - if (feed->demux->write_to_decoder) - feed->demux->write_to_decoder(feed, buf, 188); break; case DMX_TYPE_SEC: diff --git a/drivers/media/firewire/firedtv-dvb.c b/drivers/media/firewire/firedtv-dvb.c index 3b7e2f1ec98f..91f1345da116 100644 --- a/drivers/media/firewire/firedtv-dvb.c +++ b/drivers/media/firewire/firedtv-dvb.c @@ -174,7 +174,6 @@ int fdtv_dvb_register(struct firedtv *fdtv, const char *name) fdtv->demux.feednum = 16; fdtv->demux.start_feed = fdtv_start_feed; fdtv->demux.stop_feed = fdtv_stop_feed; - fdtv->demux.write_to_decoder = NULL; err = dvb_dmx_init(&fdtv->demux); if (err) diff --git a/drivers/media/pci/bt8xx/dvb-bt8xx.c b/drivers/media/pci/bt8xx/dvb-bt8xx.c index 4cb890b949c3..67db20c95aae 100644 --- a/drivers/media/pci/bt8xx/dvb-bt8xx.c +++ b/drivers/media/pci/bt8xx/dvb-bt8xx.c @@ -732,7 +732,6 @@ static int dvb_bt8xx_load_card(struct dvb_bt8xx_card *card, u32 type) card->demux.feednum = 256; card->demux.start_feed = dvb_bt8xx_start_feed; card->demux.stop_feed = dvb_bt8xx_stop_feed; - card->demux.write_to_decoder = NULL; result = dvb_dmx_init(&card->demux); if (result < 0) { diff --git a/drivers/media/pci/mantis/mantis_dvb.c b/drivers/media/pci/mantis/mantis_dvb.c index c7ba4a76e608..a92f32ec5c2a 100644 --- a/drivers/media/pci/mantis/mantis_dvb.c +++ b/drivers/media/pci/mantis/mantis_dvb.c @@ -161,7 +161,6 @@ int mantis_dvb_init(struct mantis_pci *mantis) mantis->demux.feednum = 256; mantis->demux.start_feed = mantis_dvb_start_feed; mantis->demux.stop_feed = mantis_dvb_stop_feed; - mantis->demux.write_to_decoder = NULL; dprintk(MANTIS_DEBUG, 1, "dvb_dmx_init"); result = dvb_dmx_init(&mantis->demux); diff --git a/drivers/media/pci/ngene/ngene-dvb.c b/drivers/media/pci/ngene/ngene-dvb.c index fda24ba3dc3c..241b14f9684e 100644 --- a/drivers/media/pci/ngene/ngene-dvb.c +++ b/drivers/media/pci/ngene/ngene-dvb.c @@ -310,7 +310,6 @@ int my_dvb_dmx_ts_card_init(struct dvb_demux *dvbdemux, char *id, dvbdemux->feednum = 256; dvbdemux->start_feed = start_feed; dvbdemux->stop_feed = stop_feed; - dvbdemux->write_to_decoder = NULL; dvbdemux->dmx.capabilities = (DMX_TS_FILTERING | DMX_SECTION_FILTERING | DMX_MEMORY_BASED_FILTERING); diff --git a/drivers/media/pci/pt1/pt1.c b/drivers/media/pci/pt1/pt1.c index 121a4a92ea10..92d174fe4917 100644 --- a/drivers/media/pci/pt1/pt1.c +++ b/drivers/media/pci/pt1/pt1.c @@ -869,7 +869,6 @@ pt1_alloc_adapter(struct pt1 *pt1) demux->filternum = 256; demux->start_feed = pt1_start_feed; demux->stop_feed = pt1_stop_feed; - demux->write_to_decoder = NULL; ret = dvb_dmx_init(demux); if (ret < 0) goto err_unregister_adapter; diff --git a/drivers/media/pci/smipcie/smipcie-main.c b/drivers/media/pci/smipcie/smipcie-main.c index 0c300d019d9c..a0adec89d7cb 100644 --- a/drivers/media/pci/smipcie/smipcie-main.c +++ b/drivers/media/pci/smipcie/smipcie-main.c @@ -739,7 +739,6 @@ static int my_dvb_dmx_ts_card_init(struct dvb_demux *dvbdemux, char *id, dvbdemux->feednum = 256; dvbdemux->start_feed = start_feed; dvbdemux->stop_feed = stop_feed; - dvbdemux->write_to_decoder = NULL; dvbdemux->dmx.capabilities = (DMX_TS_FILTERING | DMX_SECTION_FILTERING | DMX_MEMORY_BASED_FILTERING); diff --git a/drivers/media/platform/st/sti/c8sectpfe/c8sectpfe-common.c b/drivers/media/platform/st/sti/c8sectpfe/c8sectpfe-common.c index 5df67da25525..03af243faeff 100644 --- a/drivers/media/platform/st/sti/c8sectpfe/c8sectpfe-common.c +++ b/drivers/media/platform/st/sti/c8sectpfe/c8sectpfe-common.c @@ -47,7 +47,6 @@ static int register_dvb(struct stdemux *demux, struct dvb_adapter *adap, demux->dvb_demux.start_feed = start_feed; demux->dvb_demux.stop_feed = stop_feed; - demux->dvb_demux.write_to_decoder = NULL; result = dvb_dmx_init(&demux->dvb_demux); if (result < 0) { diff --git a/drivers/media/usb/dvb-usb-v2/dvb_usb_core.c b/drivers/media/usb/dvb-usb-v2/dvb_usb_core.c index f1c79f351ec8..b21ff02a591c 100644 --- a/drivers/media/usb/dvb-usb-v2/dvb_usb_core.c +++ b/drivers/media/usb/dvb-usb-v2/dvb_usb_core.c @@ -470,7 +470,6 @@ static int dvb_usbv2_adapter_dvb_init(struct dvb_usb_adapter *adap) adap->demux.feednum = adap->demux.filternum; adap->demux.start_feed = dvb_usb_start_feed; adap->demux.stop_feed = dvb_usb_stop_feed; - adap->demux.write_to_decoder = NULL; ret = dvb_dmx_init(&adap->demux); if (ret < 0) { dev_err(&d->udev->dev, "%s: dvb_dmx_init() failed=%d\n", diff --git a/drivers/media/usb/dvb-usb/dvb-usb-dvb.c b/drivers/media/usb/dvb-usb/dvb-usb-dvb.c index 0a7f8ba90992..b17f4b06766d 100644 --- a/drivers/media/usb/dvb-usb/dvb-usb-dvb.c +++ b/drivers/media/usb/dvb-usb/dvb-usb-dvb.c @@ -180,7 +180,6 @@ int dvb_usb_adapter_dvb_init(struct dvb_usb_adapter *adap, short *adapter_nums) adap->demux.feednum = adap->demux.filternum; adap->demux.start_feed = dvb_usb_start_feed; adap->demux.stop_feed = dvb_usb_stop_feed; - adap->demux.write_to_decoder = NULL; if ((ret = dvb_dmx_init(&adap->demux)) < 0) { err("dvb_dmx_init failed: error %d", ret); goto err_dmx; diff --git a/drivers/media/usb/pvrusb2/pvrusb2-dvb.c b/drivers/media/usb/pvrusb2/pvrusb2-dvb.c index 26811efe0fb5..930508685c7f 100644 --- a/drivers/media/usb/pvrusb2/pvrusb2-dvb.c +++ b/drivers/media/usb/pvrusb2/pvrusb2-dvb.c @@ -263,7 +263,6 @@ static int pvr2_dvb_adapter_init(struct pvr2_dvb_adapter *adap) adap->demux.feednum = 256; adap->demux.start_feed = pvr2_dvb_start_feed; adap->demux.stop_feed = pvr2_dvb_stop_feed; - adap->demux.write_to_decoder = NULL; ret = dvb_dmx_init(&adap->demux); if (ret < 0) { diff --git a/drivers/media/usb/ttusb-budget/dvb-ttusb-budget.c b/drivers/media/usb/ttusb-budget/dvb-ttusb-budget.c index 9e016b71aa91..18b483540c9f 100644 --- a/drivers/media/usb/ttusb-budget/dvb-ttusb-budget.c +++ b/drivers/media/usb/ttusb-budget/dvb-ttusb-budget.c @@ -1670,7 +1670,6 @@ static int ttusb_probe(struct usb_interface *intf, const struct usb_device_id *i ttusb->dvb_demux.feednum = TTUSB_MAXCHANNEL; ttusb->dvb_demux.start_feed = ttusb_start_feed; ttusb->dvb_demux.stop_feed = ttusb_stop_feed; - ttusb->dvb_demux.write_to_decoder = NULL; result = dvb_dmx_init(&ttusb->dvb_demux); if (result < 0) { diff --git a/drivers/media/usb/ttusb-dec/ttusb_dec.c b/drivers/media/usb/ttusb-dec/ttusb_dec.c index 38822cedd93a..e9d6294ebcc5 100644 --- a/drivers/media/usb/ttusb-dec/ttusb_dec.c +++ b/drivers/media/usb/ttusb-dec/ttusb_dec.c @@ -1476,7 +1476,6 @@ static int ttusb_dec_init_dvb(struct ttusb_dec *dec) dec->demux.feednum = 31; dec->demux.start_feed = ttusb_dec_start_feed; dec->demux.stop_feed = ttusb_dec_stop_feed; - dec->demux.write_to_decoder = NULL; if ((result = dvb_dmx_init(&dec->demux)) < 0) { printk("%s: dvb_dmx_init failed: error %d\n", __func__, diff --git a/include/media/dvb_demux.h b/include/media/dvb_demux.h index 1580de3dbc80..316b637b9f13 100644 --- a/include/media/dvb_demux.h +++ b/include/media/dvb_demux.h @@ -170,10 +170,6 @@ struct dvb_demux_feed { * a DVB feed. * @stop_feed: callback routine to be called in order to stop * a DVB feed. - * @write_to_decoder: callback routine to be called if the feed is TS and - * it is routed to an A/V decoder, when a new TS packet - * is received. - * Used only on av7110-av.c. * @check_crc32: callback routine to check CRC. If not initialized, * dvb_demux will use an internal one. * @memcopy: callback routine to memcopy received data. @@ -203,8 +199,6 @@ struct dvb_demux { int feednum; int (*start_feed)(struct dvb_demux_feed *feed); int (*stop_feed)(struct dvb_demux_feed *feed); - int (*write_to_decoder)(struct dvb_demux_feed *feed, - const u8 *buf, size_t len); u32 (*check_crc32)(struct dvb_demux_feed *feed, const u8 *buf, size_t len); void (*memcopy)(struct dvb_demux_feed *feed, u8 *dst,