From patchwork Tue Jan 31 12:35:14 2023 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Jianhua Lu X-Patchwork-Id: 13122944 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id 8CE5DC636D3 for ; Tue, 31 Jan 2023 12:35:35 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S231707AbjAaMfe (ORCPT ); Tue, 31 Jan 2023 07:35:34 -0500 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:48072 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S231303AbjAaMfd (ORCPT ); Tue, 31 Jan 2023 07:35:33 -0500 Received: from mail-pl1-x629.google.com (mail-pl1-x629.google.com [IPv6:2607:f8b0:4864:20::629]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 3C49237F19; Tue, 31 Jan 2023 04:35:26 -0800 (PST) Received: by mail-pl1-x629.google.com with SMTP id z1so7366781plg.6; Tue, 31 Jan 2023 04:35:26 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=20210112; h=content-transfer-encoding:mime-version:message-id:date:subject:cc :to:from:from:to:cc:subject:date:message-id:reply-to; bh=p3Bprh6qzi6N7O5JqZWzaWLkqDk7+Hs/nJb9oKk2rCs=; b=Qxp+RbCuOAmMF9JjQ+UQypcN6aXfqx66Bou0GHmm2nWOGeeVzhoKKs7NpSVLLgVo/2 L45/OgdoBBBkwVbOVqlA9s8JMAFfy6FviT++JVIUSyZ8D+KuI/iMheytzplsjedXFQOr qxlqx7DW6ZbISA1TCJyXt0YXAokehOGs53J3C6hMwEx+0TpNnk3oEXMhvoKLg9hwVZuV ImHe0wYjUIVo3Zvq4X9X+TizGGi2BPi2IDrnAr82SvfwSbTRThjHhiZp6bruw8kodHMN igDB8EwyTk1Gso7QIK49ltx8y3eFaJgjLcrXaiCDs2WNNgB/TL7n1b+8jeCU7t1XyRW+ kcgA== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20210112; h=content-transfer-encoding:mime-version:message-id:date:subject:cc :to:from:x-gm-message-state:from:to:cc:subject:date:message-id :reply-to; bh=p3Bprh6qzi6N7O5JqZWzaWLkqDk7+Hs/nJb9oKk2rCs=; b=4pQzXbWi0iUvfD/UUJ/zySgvXyBw63QrPfh0A3BXVSyCjLd0/wC5/g32ZrMfN4pQZj Scewrw5xrY1d0KQeo4RBkoPtOXBAWf4tJXdY1GHDTmM5sY5n4lisH4ViCq8fkth8yJX4 ASrDuqQRcUJ/nbJ35sm/cVie495rhN6RoQtrU3J1s/+ATcMHuqJuHolWOuXfzYUojk4M 7/P2uGJiQxAR6vTyd8tQ8uDyPggkV5l1blNsncSo4MDALvzqqchP5//K/dK1IPf5GRe4 KDTO5ujC3XQRvtINBvMzteW/1t/wBpHqn3znKBL3i51K61xLTRi71szY4xiWnUKRnwXX o8sQ== X-Gm-Message-State: AO0yUKWI2bNcyDRstPwUWCq10m4XkL4osEDOLMSNIY3ueea1KWRNJIMG 338/shc3QNIJdXawyzuLvLQ= X-Google-Smtp-Source: AK7set9meLUleoPPOYf2CHYo3cG+8acjn9MkDPxNVatdfbc06w9tOYQyqkqlBg1GBLUllXq6+pmRXw== X-Received: by 2002:a05:6a20:1596:b0:b8:54a2:b8d1 with SMTP id h22-20020a056a20159600b000b854a2b8d1mr22995794pzj.57.1675168525734; Tue, 31 Jan 2023 04:35:25 -0800 (PST) Received: from localhost.localdomain (n220246252084.netvigator.com. [220.246.252.84]) by smtp.gmail.com with ESMTPSA id r19-20020a170902c61300b0018544ad1e8esm9692527plr.238.2023.01.31.04.35.20 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Tue, 31 Jan 2023 04:35:25 -0800 (PST) From: Jianhua Lu To: Andy Gross , Bjorn Andersson , Konrad Dybcio , Rob Herring , Krzysztof Kozlowski , Kees Cook , Tony Luck , "Guilherme G . Piccoli" Cc: linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-hardening@vger.kernel.org, ~postmarketos/upstreaming@lists.sr.ht, phone-devel@vger.kernel.org, Jianhua Lu Subject: [PATCH v4 1/2] dt-bindings: arm: qcom: Add Xiaomi Mi Pad 5 Pro (xiaomi-elish) Date: Tue, 31 Jan 2023 20:35:14 +0800 Message-Id: <20230131123515.833-1-lujianhua000@gmail.com> X-Mailer: git-send-email 2.39.1 MIME-Version: 1.0 Precedence: bulk List-ID: X-Mailing-List: linux-hardening@vger.kernel.org Add a compatible for Xiaomi Mi Pad 5 Pro. Signed-off-by: Jianhua Lu --- No changes in v4 Changes in v3: - Pick up Krzysztof's A-b Changes in v2: - Move compatible "xiaomi-elish" down. Documentation/devicetree/bindings/arm/qcom.yaml | 1 + 1 file changed, 1 insertion(+) diff --git a/Documentation/devicetree/bindings/arm/qcom.yaml b/Documentation/devicetree/bindings/arm/qcom.yaml index 22553637c519..398ff26e6e0e 100644 --- a/Documentation/devicetree/bindings/arm/qcom.yaml +++ b/Documentation/devicetree/bindings/arm/qcom.yaml @@ -875,6 +875,7 @@ properties: - qcom,sm8250-mtp - sony,pdx203-generic - sony,pdx206-generic + - xiaomi,elish - const: qcom,sm8250 - items: From patchwork Tue Jan 31 12:35:15 2023 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Jianhua Lu X-Patchwork-Id: 13122945 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id 8B067C636D3 for ; Tue, 31 Jan 2023 12:35:45 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S231862AbjAaMfo (ORCPT ); Tue, 31 Jan 2023 07:35:44 -0500 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:48286 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S231843AbjAaMfm (ORCPT ); Tue, 31 Jan 2023 07:35:42 -0500 Received: from mail-pl1-x630.google.com (mail-pl1-x630.google.com [IPv6:2607:f8b0:4864:20::630]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 1BEAE4B4AD; Tue, 31 Jan 2023 04:35:33 -0800 (PST) Received: by mail-pl1-x630.google.com with SMTP id m2so9905213plg.4; Tue, 31 Jan 2023 04:35:33 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=20210112; h=content-transfer-encoding:mime-version:references:in-reply-to :message-id:date:subject:cc:to:from:from:to:cc:subject:date :message-id:reply-to; bh=WupCFpuK/gdTbAFNyjJ6efwKirtvbDcNhyiGEgKGwB0=; b=m91YWGtUuf/1h/cZEgO8JKInoaKwEnmWYsoSpoFHnkxY8WtS8LMhoPB6t7lSnLD3Eo h0EBusFt4Ni5kBgw4rqDsDg78zGCJuLqdrDllFj5T4JZ4BtNROs8saHlmkO5sjDsHBCp lZ4aLPzoAVxUNwy4o9lur7xxDJfEAkNcwEfMDF2L4ihFNAZA6c7BHJCXZg461LecE57Q hvpvloAaYal3HhonMKrOtF8bZdGbGXkRnSt+RAQL6W3R3r0/tBmB1AOLVD54DIpILr+6 wlI++b/9OtdrBFwuYRjUsDS5aR+ccVWHo4eAn4bT6RZ9ZGwxL+V+8W7ee+nQDOUISGGb ShPg== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20210112; h=content-transfer-encoding:mime-version:references:in-reply-to :message-id:date:subject:cc:to:from:x-gm-message-state:from:to:cc :subject:date:message-id:reply-to; bh=WupCFpuK/gdTbAFNyjJ6efwKirtvbDcNhyiGEgKGwB0=; b=hOdFaxQAQDX70cFmxzft7BANXNffkHBKIVESUTNrALKypi0/6OTGVem+oZRuF+XeTa /mEG4hAibBJ66OWW8Xhf7ms2glrHtn1UGcstnjU/CERPPWMZo8ihQubIjOqzRtKZYTOj E5SGCSrmSFFtUVLfnZO749QOtLY2kgoemVfS3vIs9wq0amcDniGpzerA+KK1TwA6LJwT CyierA2Y3mkeEcyy+XqsAuMYFIAp0YVcbWMQWj3gGzZctB6aw46/gTHsrDVfDtpKGQUf lOV+ZlQY7euvwgQqfhfsmdzzfvCu/jW0pXItIXIPH5fRCANAgeMpsaBTePU23yOCQ29C el1A== X-Gm-Message-State: AO0yUKX7wpzAdluDlxEdHG5JGqrSkWLLaLCc9lWa5RozNXWtUeUNySGC Ri7mgGnsl4/uw+2dH/2/jO8= X-Google-Smtp-Source: AK7set92rF4E2OFjzsFd4tuigWQsTbRJxe49ABL6LyQkSnGwdj12uzyFikjsa+3+YRJC8QoeQAm+mg== X-Received: by 2002:a05:6a21:33a3:b0:bc:ebd8:4c8b with SMTP id yy35-20020a056a2133a300b000bcebd84c8bmr10267671pzb.14.1675168532482; Tue, 31 Jan 2023 04:35:32 -0800 (PST) Received: from localhost.localdomain (n220246252084.netvigator.com. [220.246.252.84]) by smtp.gmail.com with ESMTPSA id r19-20020a170902c61300b0018544ad1e8esm9692527plr.238.2023.01.31.04.35.27 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Tue, 31 Jan 2023 04:35:32 -0800 (PST) From: Jianhua Lu To: Andy Gross , Bjorn Andersson , Konrad Dybcio , Rob Herring , Krzysztof Kozlowski , Kees Cook , Tony Luck , "Guilherme G . Piccoli" Cc: linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-hardening@vger.kernel.org, ~postmarketos/upstreaming@lists.sr.ht, phone-devel@vger.kernel.org, Jianhua Lu Subject: [PATCH v4 2/2] arm64: dts: qcom: sm8250: Add device tree for Xiaomi Mi Pad 5 Pro Date: Tue, 31 Jan 2023 20:35:15 +0800 Message-Id: <20230131123515.833-2-lujianhua000@gmail.com> X-Mailer: git-send-email 2.39.1 In-Reply-To: <20230131123515.833-1-lujianhua000@gmail.com> References: <20230131123515.833-1-lujianhua000@gmail.com> MIME-Version: 1.0 Precedence: bulk List-ID: X-Mailing-List: linux-hardening@vger.kernel.org Add support for Xiaomi Mi Pad 5 Pro, codename is xiaomi-elish. This commit brings support for: * ADSP/CDSP/SLPI/VENUS * Backlight * Battery fuel gauge * Framebuffer * PCIe0 * USB2.0 Signed-off-by: Jianhua Lu --- The backlight driver (ktz8866) has been merged to linux-next. Changes in v4: - Add gpu node. Changes in v3: - Sort deleted node. - Use descriptive name for reserved memory. Changes in v2: - Use definition for magic value and flags. - Add pin setting for pm8150_gpio6. - Sort device tree node. - battery_fg -> fuel-gauge - vol-up -> key-vol-up arch/arm64/boot/dts/qcom/Makefile | 1 + .../boot/dts/qcom/sm8250-xiaomi-elish.dts | 630 ++++++++++++++++++ 2 files changed, 631 insertions(+) create mode 100644 arch/arm64/boot/dts/qcom/sm8250-xiaomi-elish.dts diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile index 557d77d48dc8..4701027109c6 100644 --- a/arch/arm64/boot/dts/qcom/Makefile +++ b/arch/arm64/boot/dts/qcom/Makefile @@ -186,6 +186,7 @@ dtb-$(CONFIG_ARCH_QCOM) += sm8250-hdk.dtb dtb-$(CONFIG_ARCH_QCOM) += sm8250-mtp.dtb dtb-$(CONFIG_ARCH_QCOM) += sm8250-sony-xperia-edo-pdx203.dtb dtb-$(CONFIG_ARCH_QCOM) += sm8250-sony-xperia-edo-pdx206.dtb +dtb-$(CONFIG_ARCH_QCOM) += sm8250-xiaomi-elish.dtb dtb-$(CONFIG_ARCH_QCOM) += sm8350-hdk.dtb dtb-$(CONFIG_ARCH_QCOM) += sm8350-microsoft-surface-duo2.dtb dtb-$(CONFIG_ARCH_QCOM) += sm8350-mtp.dtb diff --git a/arch/arm64/boot/dts/qcom/sm8250-xiaomi-elish.dts b/arch/arm64/boot/dts/qcom/sm8250-xiaomi-elish.dts new file mode 100644 index 000000000000..acaa99c5ff8b --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sm8250-xiaomi-elish.dts @@ -0,0 +1,630 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2022, 2023 Jianhua Lu + */ + +/dts-v1/; + +#include +#include +#include "sm8250.dtsi" +#include "pm8150.dtsi" +#include "pm8150b.dtsi" +#include "pm8150l.dtsi" +#include "pm8009.dtsi" + +/* + * Delete following upstream (sm8250.dtsi) reserved + * memory mappings which are different on this device. + */ +/delete-node/ &adsp_mem; +/delete-node/ &cdsp_secure_heap; +/delete-node/ &slpi_mem; +/delete-node/ &spss_mem; +/delete-node/ &xbl_aop_mem; + +/ { + model = "Xiaomi Mi Pad 5 Pro"; + compatible = "xiaomi,elish", "qcom,sm8250"; + classis-type = "tablet"; + + /* required for bootloader to select correct board */ + qcom,msm-id = ; /* SM8250 v2.1 */ + qcom,board-id = <0x10008 0>; + + chosen { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + framebuffer: framebuffer@9c000000 { + compatible = "simple-framebuffer"; + reg = <0x0 0x9c000000 0x0 0x2300000>; + width = <1600>; + height = <2560>; + stride = <(1600 * 4)>; + format = "a8r8g8b8"; + }; + }; + + battery_l: battery-l { + compatible = "simple-battery"; + voltage-min-design-microvolt = <3870000>; + energy-full-design-microwatt-hours = <16600000>; + charge-full-design-microamp-hours = <4300000>; + }; + + battery_r: battery-r { + compatible = "simple-battery"; + voltage-min-design-microvolt = <3870000>; + energy-full-design-microwatt-hours = <16600000>; + charge-full-design-microamp-hours = <4300000>; + }; + + bl_vddpos_5p5: bl-vddpos-regulator { + compatible = "regulator-fixed"; + regulator-name = "bl_vddpos_5p5"; + regulator-min-microvolt = <5500000>; + regulator-max-microvolt = <5500000>; + regulator-enable-ramp-delay = <233>; + gpio = <&tlmm 130 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-boot-on; + }; + + bl_vddneg_5p5: bl-vddneg-regulator { + compatible = "regulator-fixed"; + regulator-name = "bl_vddneg_5p5"; + regulator-min-microvolt = <5500000>; + regulator-max-microvolt = <5500000>; + regulator-enable-ramp-delay = <233>; + gpio = <&tlmm 131 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-boot-on; + }; + + gpio_keys: gpio-keys { + compatible = "gpio-keys"; + + pinctrl-names = "default"; + pinctrl-0 = <&vol_up_n>; + + key-vol-up { + label = "Volume Up"; + gpios = <&pm8150_gpios 6 GPIO_ACTIVE_LOW>; + linux,code = ; + debounce-interval = <15>; + linux,can-disable; + gpio-key,wakeup; + }; + }; + + vph_pwr: vph-pwr-regulator { + compatible = "regulator-fixed"; + regulator-name = "vph_pwr"; + regulator-min-microvolt = <3700000>; + regulator-max-microvolt = <3700000>; + }; + + /* S6c is really ebi.lvl but it's there for supply map completeness sake. */ + vreg_s6c_0p88: smpc6-regulator { + compatible = "regulator-fixed"; + regulator-name = "vreg_s6c_0p88"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <880000>; + regulator-always-on; + vin-supply = <&vph_pwr>; + }; + + reserved-memory { + xbl_aop_mem: xbl-aop@80700000 { + reg = <0x0 0x80600000 0x0 0x260000>; + no-map; + }; + + slpi_mem: slpi@88c00000 { + reg = <0x0 0x88c00000 0x0 0x2f00000>; + no-map; + }; + + adsp_mem: adsp@8bb00000 { + reg = <0x0 0x8bb00000 0x0 0x2500000>; + no-map; + }; + + spss_mem: spss@8e000000 { + reg = <0x0 0x8e000000 0x0 0x100000>; + no-map; + }; + + cdsp_secure_heap: cdsp-secure-heap@8e100000 { + reg = <0x0 0x8e100000 0x0 0x4600000>; + no-map; + }; + + cont_splash_mem: cont-splash@9c000000 { + reg = <0x0 0x9c000000 0x0 0x2300000>; + no-map; + }; + + ramoops@b0000000 { + compatible = "ramoops"; + reg = <0x0 0xb0000000 0x0 0x400000>; + record-size = <0x1000>; + console-size = <0x200000>; + ecc-size = <16>; + no-map; + }; + }; +}; + +&adsp { + firmware-name = "qcom/sm8250/xiaomi/elish/adsp.mbn"; + status = "okay"; +}; + +&apps_rsc { + regulators-0 { + compatible = "qcom,pm8150-rpmh-regulators"; + qcom,pmic-id = "a"; + + vdd-s1-supply = <&vph_pwr>; + vdd-s2-supply = <&vph_pwr>; + vdd-s3-supply = <&vph_pwr>; + vdd-s4-supply = <&vph_pwr>; + vdd-s5-supply = <&vph_pwr>; + vdd-s6-supply = <&vph_pwr>; + vdd-s7-supply = <&vph_pwr>; + vdd-s8-supply = <&vph_pwr>; + vdd-s9-supply = <&vph_pwr>; + vdd-s10-supply = <&vph_pwr>; + vdd-l1-l8-l11-supply = <&vreg_s6c_0p88>; + vdd-l2-l10-supply = <&vreg_bob>; + vdd-l3-l4-l5-l18-supply = <&vreg_s6a_0p95>; + vdd-l6-l9-supply = <&vreg_s8c_1p35>; + vdd-l7-l12-l14-l15-supply = <&vreg_s5a_1p9>; + vdd-l13-l16-l17-supply = <&vreg_bob>; + + /* (S1+S2+S3) - cx.lvl (ARC) */ + + vreg_s4a_1p8: smps4 { + regulator-name = "vreg_s4a_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1920000>; + regulator-initial-mode = ; + regulator-allow-set-load; + regulator-allowed-modes = ; + }; + + vreg_s5a_1p9: smps5 { + regulator-name = "vreg_s5a_1p9"; + regulator-min-microvolt = <1900000>; + regulator-max-microvolt = <2040000>; + regulator-initial-mode = ; + }; + + vreg_s6a_0p95: smps6 { + regulator-name = "vreg_s6a_0p95"; + regulator-min-microvolt = <950000>; + regulator-max-microvolt = <1128000>; + regulator-initial-mode = ; + }; + + vreg_l2a_3p1: ldo2 { + regulator-name = "vreg_l2a_3p1"; + regulator-min-microvolt = <3072000>; + regulator-max-microvolt = <3072000>; + regulator-initial-mode = ; + }; + + vreg_l3a_0p9: ldo3 { + regulator-name = "vreg_l3a_0p9"; + regulator-min-microvolt = <928000>; + regulator-max-microvolt = <932000>; + regulator-initial-mode = ; + }; + + /* L4 - lmx.lvl (ARC) */ + + vreg_l5a_0p88: ldo5 { + regulator-name = "vreg_l5a_0p88"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <880000>; + regulator-initial-mode = ; + }; + + vreg_l6a_1p2: ldo6 { + regulator-name = "vreg_l6a_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = ; + regulator-allow-set-load; + regulator-allowed-modes = ; + }; + + /* L7 is unused. */ + + vreg_l9a_1p2: ldo9 { + regulator-name = "vreg_l9a_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = ; + }; + + /* L10 is unused, L11 - lcx.lvl (ARC) */ + + vreg_l12a_1p8: ldo12 { + regulator-name = "vreg_l12a_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = ; + }; + + /* L13 is unused. */ + + vreg_l14a_1p88: ldo14 { + regulator-name = "vreg_l14a_1p88"; + regulator-min-microvolt = <1880000>; + regulator-max-microvolt = <1880000>; + regulator-initial-mode = ; + }; + + /* L15 & L16 are unused. */ + + vreg_l17a_3p0: ldo17 { + regulator-name = "vreg_l17a_3p0"; + regulator-min-microvolt = <2496000>; + regulator-max-microvolt = <3008000>; + regulator-initial-mode = ; + regulator-allow-set-load; + regulator-allowed-modes = ; + }; + + vreg_l18a_0p9: ldo18 { + regulator-name = "vreg_l18a_0p9"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <920000>; + regulator-initial-mode = ; + }; + }; + + /* + * Remaining regulators that are not yet supported: + * OLEDB: 4925000-8100000 + * ab: 4600000-6100000 + * ibb: 800000-5400000 + */ + regulators-1 { + compatible = "qcom,pm8150l-rpmh-regulators"; + qcom,pmic-id = "c"; + + vdd-s1-supply = <&vph_pwr>; + vdd-s2-supply = <&vph_pwr>; + vdd-s3-supply = <&vph_pwr>; + vdd-s4-supply = <&vph_pwr>; + vdd-s5-supply = <&vph_pwr>; + vdd-s6-supply = <&vph_pwr>; + vdd-s7-supply = <&vph_pwr>; + vdd-s8-supply = <&vph_pwr>; + vdd-l1-l8-supply = <&vreg_s4a_1p8>; + vdd-l2-l3-supply = <&vreg_s8c_1p35>; + vdd-l4-l5-l6-supply = <&vreg_bob>; + vdd-l7-l11-supply = <&vreg_bob>; + vdd-l9-l10-supply = <&vreg_bob>; + vdd-bob-supply = <&vph_pwr>; + + vreg_bob: bob { + regulator-name = "vreg_bob"; + regulator-min-microvolt = <3350000>; + regulator-max-microvolt = <3960000>; + regulator-initial-mode = ; + }; + + /* + * S1-S6 are ARCs: + * (S1+S2) - gfx.lvl, + * S3 - mx.lvl, + * (S4+S5) - mmcx.lvl, + * S6 - ebi.lvl + */ + + vreg_s7c_0p35: smps7 { + regulator-name = "vreg_s7c_0p35"; + regulator-min-microvolt = <348000>; + regulator-max-microvolt = <1000000>; + regulator-initial-mode = ; + }; + + vreg_s8c_1p35: smps8 { + regulator-name = "vreg_s8c_1p35"; + regulator-min-microvolt = <1350000>; + regulator-max-microvolt = <1400000>; + regulator-initial-mode = ; + }; + + vreg_l1c_1p8: ldo1 { + regulator-name = "vreg_l1c_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = ; + }; + + /* L2-4 are unused. */ + + vreg_l5c_1p8: ldo5 { + regulator-name = "vreg_l5c_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2800000>; + regulator-initial-mode = ; + }; + + vreg_l6c_2p9: ldo6 { + regulator-name = "vreg_l6c_2p9"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = ; + regulator-allow-set-load; + regulator-allowed-modes = ; + }; + + vreg_l7c_2p85: ldo7 { + regulator-name = "vreg_l7c_2p85"; + regulator-min-microvolt = <2856000>; + regulator-max-microvolt = <3104000>; + regulator-initial-mode = ; + }; + + vreg_l8c_1p8: ldo8 { + regulator-name = "vreg_l8c_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = ; + }; + + vreg_l9c_2p9: ldo9 { + regulator-name = "vreg_l9c_2p9"; + regulator-min-microvolt = <2704000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = ; + regulator-allow-set-load; + regulator-allowed-modes = ; + }; + + vreg_l10c_3p3: ldo10 { + regulator-name = "vreg_l10c_3p3"; + regulator-min-microvolt = <3296000>; + regulator-max-microvolt = <3296000>; + regulator-initial-mode = ; + }; + + vreg_l11c_3p0: ldo11 { + regulator-name = "vreg_l11c_3p0"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-initial-mode = ; + }; + }; + + regulators-2 { + compatible = "qcom,pm8009-rpmh-regulators"; + qcom,pmic-id = "f"; + + vdd-s1-supply = <&vph_pwr>; + vdd-s2-supply = <&vreg_bob>; + vdd-l2-supply = <&vreg_s8c_1p35>; + vdd-l5-l6-supply = <&vreg_bob>; + vdd-l7-supply = <&vreg_s4a_1p8>; + + vreg_s1f_1p2: smps1 { + regulator-name = "vreg_s1f_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = ; + }; + + vreg_s2f_0p5: smps2 { + regulator-name = "vreg_s2f_0p5"; + regulator-min-microvolt = <512000>; + regulator-max-microvolt = <1100000>; + regulator-initial-mode = ; + }; + + /* L1 is unused. */ + + vreg_l2f_1p3: ldo2 { + regulator-name = "vreg_l2f_1p3"; + regulator-min-microvolt = <1304000>; + regulator-max-microvolt = <1304000>; + regulator-initial-mode = ; + }; + + /* L3 & L4 are unused. */ + + vreg_l5f_2p8: ldo5 { + regulator-name = "vreg_l5f_2p85"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-initial-mode = ; + }; + + vreg_l6f_2p8: ldo6 { + regulator-name = "vreg_l6f_2p8"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-initial-mode = ; + }; + + vreg_l7f_1p8: ldo7 { + regulator-name = "vreg_l7f_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = ; + }; + }; +}; + +&cdsp { + firmware-name = "qcom/sm8250/xiaomi/elish/cdsp.mbn"; + status = "okay"; +}; + +&gmu { + status = "okay"; +}; + +&gpi_dma0 { + status = "okay"; +}; + +&gpi_dma1 { + status = "okay"; +}; + +&gpi_dma2 { + status = "okay"; +}; + +&gpu { + status = "okay"; + + zap-shader { + memory-region = <&gpu_mem>; + firmware-name = "qcom/sm8250/xiaomi/elish/a650_zap.mbn"; + }; +}; + +&i2c0 { + clock-frequency = <400000>; + status = "okay"; + + fuel-gauge@55 { + compatible = "ti,bq27z561"; + reg = <0x55>; + monitored-battery = <&battery_r>; + }; +}; + +&i2c11 { + clock-frequency = <400000>; + status = "okay"; + + backlight: backlight@11 { + compatible = "kinetic,ktz8866"; + reg = <0x11>; + vddpos-supply = <&bl_vddpos_5p5>; + vddneg-supply = <&bl_vddneg_5p5>; + enable-gpios = <&tlmm 139 GPIO_ACTIVE_HIGH>; + current-num-sinks = <5>; + kinetic,current-ramp-delay-ms = <128>; + kinetic,led-enable-ramp-delay-ms = <1>; + kinetic,enable-lcd-bias; + }; +}; + +&i2c13 { + clock-frequency = <400000>; + status = "okay"; + + fuel-gauge@55 { + compatible = "ti,bq27z561"; + reg = <0x55>; + monitored-battery = <&battery_l>; + }; +}; + +&pcie0 { + status = "okay"; +}; + +&pcie0_phy { + vdda-phy-supply = <&vreg_l5a_0p88>; + vdda-pll-supply = <&vreg_l9a_1p2>; + status = "okay"; +}; + +&pm8150_gpios { + vol_up_n: vol-up-n-state { + pins = "gpio6"; + function = "normal"; + power-source = <1>; + input-enable; + bias-pull-up; + }; +}; + +&pon_pwrkey { + status = "okay"; +}; + +&pon_resin { + linux,code = ; + status = "okay"; +}; + +&qupv3_id_0 { + status = "okay"; +}; + +&qupv3_id_1 { + status = "okay"; +}; + +&qupv3_id_2 { + status = "okay"; +}; + +&slpi { + firmware-name = "qcom/sm8250/xiaomi/elish/slpi.mbn"; + status = "okay"; +}; + +&tlmm { + gpio-reserved-ranges = <40 4>; +}; + +&usb_1 { + /* USB 2.0 only */ + qcom,select-utmi-as-pipe-clk; + status = "okay"; +}; + +&usb_1_dwc3 { + dr_mode = "peripheral"; + maximum-spped = "high-speed"; + /* Remove USB3 phy */ + phys = <&usb_1_hsphy>; + phy-names = "usb2-phy"; +}; + +&usb_1_hsphy { + vdda-pll-supply = <&vreg_l5a_0p88>; + vdda18-supply = <&vreg_l12a_1p8>; + vdda33-supply = <&vreg_l2a_3p1>; + status = "okay"; +}; + +&ufs_mem_hc { + vcc-supply = <&vreg_l17a_3p0>; + vcc-max-microamp = <800000>; + vccq-supply = <&vreg_l6a_1p2>; + vccq-max-microamp = <800000>; + vccq2-supply = <&vreg_s4a_1p8>; + vccq2-max-microamp = <800000>; + status = "okay"; +}; + +&ufs_mem_phy { + vdda-phy-supply = <&vreg_l5a_0p88>; + vdda-pll-supply = <&vreg_l9a_1p2>; + status = "okay"; +}; + +&venus { + firmware-name = "qcom/sm8250/elish/venus.mbn"; + status = "okay"; +};