From patchwork Thu May 4 09:39:30 2023 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 8bit X-Patchwork-Submitter: "Matyas, Daniel" X-Patchwork-Id: 13231029 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id 7C4FFC7EE21 for ; Thu, 4 May 2023 10:40:38 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S229962AbjEDKkh (ORCPT ); Thu, 4 May 2023 06:40:37 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:56294 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S229915AbjEDKkf (ORCPT ); Thu, 4 May 2023 06:40:35 -0400 Received: from mx0a-00128a01.pphosted.com (mx0a-00128a01.pphosted.com [148.163.135.77]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id BABDB4EDC; Thu, 4 May 2023 03:40:33 -0700 (PDT) Received: from pps.filterd (m0167088.ppops.net [127.0.0.1]) by mx0a-00128a01.pphosted.com (8.17.1.19/8.17.1.19) with ESMTP id 3449XJjr026664; Thu, 4 May 2023 06:40:15 -0400 Received: from nwd2mta4.analog.com ([137.71.173.58]) by mx0a-00128a01.pphosted.com (PPS) with ESMTPS id 3qca678amw-1 (version=TLSv1.2 cipher=ECDHE-RSA-AES256-GCM-SHA384 bits=256 verify=NOT); Thu, 04 May 2023 06:40:14 -0400 Received: from ASHBMBX9.ad.analog.com (ASHBMBX9.ad.analog.com [10.64.17.10]) by nwd2mta4.analog.com (8.14.7/8.14.7) with ESMTP id 344AeD0o056870 (version=TLSv1/SSLv3 cipher=ECDHE-RSA-AES256-GCM-SHA384 bits=256 verify=FAIL); Thu, 4 May 2023 06:40:13 -0400 Received: from ASHBCASHYB5.ad.analog.com (10.64.17.133) by ASHBMBX9.ad.analog.com (10.64.17.10) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384) id 15.2.986.14; Thu, 4 May 2023 06:40:12 -0400 Received: from ASHBMBX9.ad.analog.com (10.64.17.10) by ASHBCASHYB5.ad.analog.com (10.64.17.133) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384) id 15.2.986.14; Thu, 4 May 2023 06:40:12 -0400 Received: from zeus.spd.analog.com (10.66.68.11) by ashbmbx9.ad.analog.com (10.64.17.10) with Microsoft SMTP Server id 15.2.986.14 via Frontend Transport; Thu, 4 May 2023 06:40:12 -0400 Received: from daniel-Precision-5530.ad.analog.com ([10.48.65.214]) by zeus.spd.analog.com (8.15.1/8.15.1) with ESMTP id 344AdtQJ012745; Thu, 4 May 2023 06:39:58 -0400 From: Daniel Matyas CC: Daniel Matyas , Jean Delvare , Guenter Roeck , Rob Herring , Krzysztof Kozlowski , Jonathan Corbet , , , , Subject: [PATCH v4 1/2] dt-bindings: hwmon: add MAX31827 Date: Thu, 4 May 2023 12:39:30 +0300 Message-ID: <20230504093933.70660-1-daniel.matyas@analog.com> X-Mailer: git-send-email 2.34.1 MIME-Version: 1.0 X-ADIRuleOP-NewSCL: Rule Triggered X-Proofpoint-GUID: mgnzufv0GoJSOMbELjfVOl1xHWPiTpa5 X-Proofpoint-ORIG-GUID: mgnzufv0GoJSOMbELjfVOl1xHWPiTpa5 X-Proofpoint-Virus-Version: vendor=baseguard engine=ICAP:2.0.254,Aquarius:18.0.942,Hydra:6.0.573,FMLib:17.11.170.22 definitions=2023-05-04_06,2023-05-04_01,2023-02-09_01 X-Proofpoint-Spam-Details: rule=outbound_notspam policy=outbound score=0 mlxscore=0 spamscore=0 suspectscore=0 impostorscore=0 adultscore=0 bulkscore=0 phishscore=0 priorityscore=1501 clxscore=1015 mlxlogscore=999 malwarescore=0 lowpriorityscore=0 classifier=spam adjust=0 reason=mlx scancount=1 engine=8.12.0-2303200000 definitions=main-2305040086 To: unlisted-recipients:; (no To-header on input) Precedence: bulk List-ID: X-Mailing-List: linux-hwmon@vger.kernel.org MAX31827 is a low-power temperature switch with I2C interface. The device is a ±1°C accuracy from -40°C to +125°C (12 bits) local temperature switch and sensor with I2C/SM- Bus interface. The combination of small 6-bump wafer-lev- el package (WLP) and high accuracy makes this temper- ature sensor/switch ideal for a wide range of applications. Signed-off-by: Daniel Matyas --- .../bindings/hwmon/adi,max31827.yaml | 54 +++++++++++++++++++ MAINTAINERS | 7 +++ 2 files changed, 61 insertions(+) create mode 100644 Documentation/devicetree/bindings/hwmon/adi,max31827.yaml diff --git a/Documentation/devicetree/bindings/hwmon/adi,max31827.yaml b/Documentation/devicetree/bindings/hwmon/adi,max31827.yaml new file mode 100644 index 000000000000..2dc8b07b4d3b --- /dev/null +++ b/Documentation/devicetree/bindings/hwmon/adi,max31827.yaml @@ -0,0 +1,54 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/hwmon/adi,max31827.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Analog Devices MAX31827, MAX31828, MAX31829 Low-Power Temperature Switch + +maintainers: + - Daniel Matyas + +description: | + Analog Devices MAX31827, MAX31828, MAX31829 Low-Power Temperature Switch with + I2C Interface + https://www.analog.com/media/en/technical-documentation/data-sheets/MAX31827-MAX31829.pdf + +properties: + compatible: + oneOf: + - const: adi,max31827 + - items: + - enum: + - adi,max31828 + - adi,max31829 + - const: adi,max31827 + + reg: + maxItems: 1 + + vref-supply: + description: + Must have values in the interval (1.6V; 3.6V) in order for the device to + function correctly. + +required: + - compatible + - reg + - vref-supply + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + temperature-sensor@42 { + compatible = "adi,max31827"; + reg = <0x42>; + vref-supply = <®_vdd>; + }; + }; +... diff --git a/MAINTAINERS b/MAINTAINERS index c6545eb54104..0997a0490c97 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -12535,6 +12535,13 @@ F: Documentation/userspace-api/media/drivers/max2175.rst F: drivers/media/i2c/max2175* F: include/uapi/linux/max2175.h +MAX31827 TEMPERATURE SWITCH DRIVER +M: Daniel Matyas +L: linux-hwmon@vger.kernel.org +S: Supported +W: http://ez.analog.com/community/linux-device-drivers +F: Documentation/devicetree/bindings/hwmon/adi,max31827.yaml + MAX6650 HARDWARE MONITOR AND FAN CONTROLLER DRIVER L: linux-hwmon@vger.kernel.org S: Orphan From patchwork Thu May 4 09:39:31 2023 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 8bit X-Patchwork-Submitter: "Matyas, Daniel" X-Patchwork-Id: 13231030 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id AC146C7EE21 for ; Thu, 4 May 2023 10:40:45 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S229915AbjEDKko (ORCPT ); Thu, 4 May 2023 06:40:44 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:56410 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S229942AbjEDKkm (ORCPT ); Thu, 4 May 2023 06:40:42 -0400 Received: from mx0a-00128a01.pphosted.com (mx0a-00128a01.pphosted.com [148.163.135.77]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 193194EE6; Thu, 4 May 2023 03:40:40 -0700 (PDT) Received: from pps.filterd (m0167088.ppops.net [127.0.0.1]) by mx0a-00128a01.pphosted.com (8.17.1.19/8.17.1.19) with ESMTP id 3449XhRK027310; Thu, 4 May 2023 06:40:22 -0400 Received: from nwd2mta3.analog.com ([137.71.173.56]) by mx0a-00128a01.pphosted.com (PPS) with ESMTPS id 3qca678anh-1 (version=TLSv1.2 cipher=ECDHE-RSA-AES256-GCM-SHA384 bits=256 verify=NOT); Thu, 04 May 2023 06:40:22 -0400 Received: from ASHBMBX8.ad.analog.com (ASHBMBX8.ad.analog.com [10.64.17.5]) by nwd2mta3.analog.com (8.14.7/8.14.7) with ESMTP id 344AeLbQ002245 (version=TLSv1/SSLv3 cipher=ECDHE-RSA-AES256-GCM-SHA384 bits=256 verify=FAIL); Thu, 4 May 2023 06:40:21 -0400 Received: from ASHBMBX9.ad.analog.com (10.64.17.10) by ASHBMBX8.ad.analog.com (10.64.17.5) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384) id 15.2.986.14; Thu, 4 May 2023 06:40:20 -0400 Received: from zeus.spd.analog.com (10.66.68.11) by ashbmbx9.ad.analog.com (10.64.17.10) with Microsoft SMTP Server id 15.2.986.14 via Frontend Transport; Thu, 4 May 2023 06:40:20 -0400 Received: from daniel-Precision-5530.ad.analog.com ([10.48.65.214]) by zeus.spd.analog.com (8.15.1/8.15.1) with ESMTP id 344AdtQK012745; Thu, 4 May 2023 06:40:14 -0400 From: Daniel Matyas CC: Daniel Matyas , Jean Delvare , Guenter Roeck , Rob Herring , Krzysztof Kozlowski , Jonathan Corbet , , , , Subject: [PATCH v4 2/2] hwmon: max31827: add MAX31827 driver Date: Thu, 4 May 2023 12:39:31 +0300 Message-ID: <20230504093933.70660-2-daniel.matyas@analog.com> X-Mailer: git-send-email 2.34.1 In-Reply-To: <20230504093933.70660-1-daniel.matyas@analog.com> References: <20230504093933.70660-1-daniel.matyas@analog.com> MIME-Version: 1.0 X-ADIRuleOP-NewSCL: Rule Triggered X-Proofpoint-GUID: g7ez52UXF-3DlQ-iUsBrTSG3kw1sePeY X-Proofpoint-ORIG-GUID: g7ez52UXF-3DlQ-iUsBrTSG3kw1sePeY X-Proofpoint-Virus-Version: vendor=baseguard engine=ICAP:2.0.254,Aquarius:18.0.942,Hydra:6.0.573,FMLib:17.11.170.22 definitions=2023-05-04_06,2023-05-04_01,2023-02-09_01 X-Proofpoint-Spam-Details: rule=outbound_notspam policy=outbound score=0 mlxscore=0 spamscore=0 suspectscore=0 impostorscore=0 adultscore=0 bulkscore=0 phishscore=0 priorityscore=1501 clxscore=1015 mlxlogscore=999 malwarescore=0 lowpriorityscore=0 classifier=spam adjust=0 reason=mlx scancount=1 engine=8.12.0-2303200000 definitions=main-2305040086 To: unlisted-recipients:; (no To-header on input) Precedence: bulk List-ID: X-Mailing-List: linux-hwmon@vger.kernel.org MAX31827 is a low-power temperature switch with I2C interface. The device is a ±1°C accuracy from -40°C to +125°C (12 bits) local temperature switch and sensor with I2C/SM- Bus interface. The combination of small 6-bump wafer-lev- el package (WLP) and high accuracy makes this temper- ature sensor/switch ideal for a wide range of applications. Signed-off-by: Daniel Matyas --- Documentation/hwmon/index.rst | 1 + Documentation/hwmon/max31827.rst | 83 ++++++ MAINTAINERS | 2 + drivers/hwmon/Kconfig | 11 + drivers/hwmon/Makefile | 2 +- drivers/hwmon/max31827.c | 428 +++++++++++++++++++++++++++++++ 6 files changed, 526 insertions(+), 1 deletion(-) create mode 100644 Documentation/hwmon/max31827.rst create mode 100644 drivers/hwmon/max31827.c diff --git a/Documentation/hwmon/index.rst b/Documentation/hwmon/index.rst index f1fe75f596a5..965a830ea766 100644 --- a/Documentation/hwmon/index.rst +++ b/Documentation/hwmon/index.rst @@ -139,6 +139,7 @@ Hardware Monitoring Kernel Drivers max31760 max31785 max31790 + max31827 max34440 max6620 max6639 diff --git a/Documentation/hwmon/max31827.rst b/Documentation/hwmon/max31827.rst new file mode 100644 index 000000000000..5b94ad62baa3 --- /dev/null +++ b/Documentation/hwmon/max31827.rst @@ -0,0 +1,83 @@ +.. SPDX-License-Identifier: GPL-2.0 + +Kernel driver max31827 +====================== + +Supported chips: + + * Maxim MAX31827 + + Prefix: 'max31827' + + Addresses scanned: I2C 0x40 - 0x5f + + Datasheet: Publicly available at the Analog Devices website + + * Maxim MAX31828 + + Prefix: 'max31828' + + Addresses scanned: I2C 0x40 - 0x5f + + Datasheet: Publicly available at the Analog Devices website + + * Maxim MAX31829 + + Prefix: 'max31829' + + Addresses scanned: I2C 0x40 - 0x5f + + Datasheet: Publicly available at the Analog Devices website + + +Authors: + - Daniel Matyas + +Description +----------- + +The chips supported by this driver are quite similar. The only difference +between them is found in the default power-on behaviour of the chips. While the +MAX31827's fault queue is set to 1, the other two chip's fault queue is set to +4. Besides this, the MAX31829's alarm active state is high, while the other two +chip's alarms are active on low. It is important to note that the chips can be +configured to operate in the same manner with 1 write operation to the +configuration register. From here on, we will refer to all these chips as +MAX31827. + +MAX31827 implements a temperature sensor with a 6 WLP packaging scheme. This +sensor measures the temperature of the chip itself. + +MAX31827 has low and over temperature alarms with an effective value and a +hysteresis value: -40 and -30 degrees for under temperature alarm and +100 and ++90 degrees for over temperature alarm. + +The alarm can be configured in comparator and interrupt mode. Currently only +comparator mode is implemented. In Comparator mode, the OT/UT status bits have a +value of 1 when the temperature rises above the TH value or falls below TL, +which is also subject to the Fault Queue selection. OT status returns to 0 when +the temperature drops below the TH_HYST value or when shutdown mode is entered. +Similarly, UT status returns to 0 when the temperature rises above TL_HYST value +or when shutdown mode is entered. + +Putting the MAX31827 into shutdown mode also resets the OT/UT status bits. Note +that if the mode is changed while OT/UT status bits are set, an OT/UT status +reset may be required before it begins to behave normally. To prevent this, +it is recommended to perform a read of the configuration/status register to +clear the status bits before changing the operating mode. + +The conversions can be manual with the one-shot functionality and automatic with +a set frequency. When powered on, the chip measures temperatures with 1 conv/s. +Enabling the device when it is already enabled has the side effect of setting +the conversion frequency to 1 conv/s. The conversion time varies depending on +the resolution. The conversion time doubles with every bit of increased +resolution. For 10 bit resolution 35ms are needed, while for 12 bit resolution +(default) 140ms. When chip is in shutdown mode and a read operation is +requested, one-shot is triggered, the device waits for 140 (conversion time) + 1 +(error) ms, and only after that is the temperature value register read. + +Notes +----- + +Currently fault queue, alarm polarity and resolution cannot be modified. +PEC is not implemented either. diff --git a/MAINTAINERS b/MAINTAINERS index 0997a0490c97..fabc8869b13b 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -12541,6 +12541,8 @@ L: linux-hwmon@vger.kernel.org S: Supported W: http://ez.analog.com/community/linux-device-drivers F: Documentation/devicetree/bindings/hwmon/adi,max31827.yaml +F: Documentation/hwmon/max31827.rst +F: drivers/hwmon/max31827.c MAX6650 HARDWARE MONITOR AND FAN CONTROLLER DRIVER L: linux-hwmon@vger.kernel.org diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig index 5b3b76477b0e..1e8546b3a8f2 100644 --- a/drivers/hwmon/Kconfig +++ b/drivers/hwmon/Kconfig @@ -1097,6 +1097,17 @@ config SENSORS_MAX31760 This driver can also be built as a module. If so, the module will be called max31760. +config MAX31827 + tristate "MAX31827 low-power temperature switch and similar devices" + depends on I2C + select REGMAP_I2C + help + If you say yes here you get support for MAX31827, MAX31828 and + MAX31829 low-power temperature switches and sensors connected with I2C. + + This driver can also be built as a module. If so, the module + will be called max31827. + config SENSORS_MAX6620 tristate "Maxim MAX6620 fan controller" depends on I2C diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile index 88712b5031c8..dfb9aaf979bb 100644 --- a/drivers/hwmon/Makefile +++ b/drivers/hwmon/Makefile @@ -149,6 +149,7 @@ obj-$(CONFIG_SENSORS_MAX6642) += max6642.o obj-$(CONFIG_SENSORS_MAX6650) += max6650.o obj-$(CONFIG_SENSORS_MAX6697) += max6697.o obj-$(CONFIG_SENSORS_MAX31790) += max31790.o +obj-$(CONFIG_MAX31827) += max31827.o obj-$(CONFIG_SENSORS_MC13783_ADC)+= mc13783-adc.o obj-$(CONFIG_SENSORS_MC34VR500) += mc34vr500.o obj-$(CONFIG_SENSORS_MCP3021) += mcp3021.o @@ -223,4 +224,3 @@ obj-$(CONFIG_SENSORS_PECI) += peci/ obj-$(CONFIG_PMBUS) += pmbus/ ccflags-$(CONFIG_HWMON_DEBUG_CHIP) := -DDEBUG - diff --git a/drivers/hwmon/max31827.c b/drivers/hwmon/max31827.c new file mode 100644 index 000000000000..48ab62f76f7b --- /dev/null +++ b/drivers/hwmon/max31827.c @@ -0,0 +1,428 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * max31827.c - Support for Maxim Low-Power Switch + * + * Copyright (c) 2023 Daniel Matyas + */ + +#include +#include +#include +#include +#include +#include + +#define MAX31827_T_REG 0x0 +#define MAX31827_CONFIGURATION_REG 0x2 +#define MAX31827_TH_REG 0x4 +#define MAX31827_TL_REG 0x6 +#define MAX31827_TH_HYST_REG 0x8 +#define MAX31827_TL_HYST_REG 0xA + +#define MAX31827_CONFIGURATION_1SHOT_MASK BIT(0) +#define MAX31827_CONFIGURATION_CNV_RATE_MASK GENMASK(3, 1) +#define MAX31827_CONFIGURATION_U_TEMP_STAT_MASK BIT(14) +#define MAX31827_CONFIGURATION_O_TEMP_STAT_MASK BIT(15) + +#define MAX31827_12_BIT_CNV_TIME 141 + +#define MAX31827_CNV_1_DIV_64_HZ 0x1 +#define MAX31827_CNV_1_DIV_32_HZ 0x2 +#define MAX31827_CNV_1_DIV_16_HZ 0x3 +#define MAX31827_CNV_1_DIV_4_HZ 0x4 +#define MAX31827_CNV_1_HZ 0x5 +#define MAX31827_CNV_4_HZ 0x6 +#define MAX31827_CNV_8_HZ 0x7 + +#define LONG_MASK 0xFFFFFFFFFFFFFFFF + +#define MAX31827_16_BIT_TO_M_DGR(x) ((long)(~(~(x) & LONG_MASK)) * 1000 >> 4) +#define MAX31827_M_DGR_TO_16_BIT(x) (((x) << 4) / 1000) +#define MAX31827_DEVICE_ENABLE(x) ((x) ? 0xA : 0x0) + +struct max31827_state { + /* + * Prevent simultaneous access to the i2c client. + */ + struct mutex lock; + struct regmap *regmap; + bool enable; +}; + +static const struct regmap_config max31827_regmap = { + .reg_bits = 8, + .val_bits = 16, + .max_register = 0xA, +}; + +static int write_alarm_val(struct max31827_state *st, unsigned int reg, + long val) +{ + unsigned int cfg; + unsigned int tmp; + int ret; + + val = MAX31827_M_DGR_TO_16_BIT(val); + + /* + * Before the Temperature Threshold Alarm and Alarm Hysteresis Threshold + * register values are changed over I2C, the part must be in shutdown + * mode. + * + * Mutex is used to ensure, that some other process doesn't change the + * configuration register. + */ + mutex_lock(&st->lock); + + if (!st->enable) + return regmap_write(st->regmap, reg, val); + + ret = regmap_read(st->regmap, MAX31827_CONFIGURATION_REG, &cfg); + if (ret) + return ret; + + tmp = cfg & ~(MAX31827_CONFIGURATION_1SHOT_MASK | + MAX31827_CONFIGURATION_CNV_RATE_MASK); + ret = regmap_write(st->regmap, MAX31827_CONFIGURATION_REG, tmp); + if (ret) + return ret; + + ret = regmap_write(st->regmap, reg, val); + if (ret) + return ret; + + ret = regmap_write(st->regmap, MAX31827_CONFIGURATION_REG, cfg); + + mutex_unlock(&st->lock); + + return ret; +} + +static umode_t max31827_is_visible(const void *state, + enum hwmon_sensor_types type, u32 attr, + int channel) +{ + if (type == hwmon_temp) { + switch (attr) { + case hwmon_temp_enable: + case hwmon_temp_max: + case hwmon_temp_min: + case hwmon_temp_max_hyst: + case hwmon_temp_min_hyst: + return 0644; + case hwmon_temp_input: + case hwmon_temp_min_alarm: + case hwmon_temp_max_alarm: + return 0444; + default: + return 0; + } + } else if (type == hwmon_chip) { + if (attr == hwmon_chip_update_interval) + return 0644; + } + + return 0; +} + +static int max31827_read(struct device *dev, enum hwmon_sensor_types type, + u32 attr, int channel, long *val) +{ + struct max31827_state *st = dev_get_drvdata(dev); + unsigned int uval; + int ret; + + switch (type) { + case hwmon_temp: + switch (attr) { + case hwmon_temp_enable: + ret = regmap_read(st->regmap, + MAX31827_CONFIGURATION_REG, &uval); + uval = FIELD_GET(MAX31827_CONFIGURATION_1SHOT_MASK | + MAX31827_CONFIGURATION_CNV_RATE_MASK, + uval); + *val = !!uval; + + break; + case hwmon_temp_input: + mutex_lock(&st->lock); + + if (!st->enable) { + /* + * This operation requires mutex protection, + * because the chip configuration should not + * be changed during the conversion process. + */ + + ret = regmap_update_bits(st->regmap, + MAX31827_CONFIGURATION_REG, + MAX31827_CONFIGURATION_1SHOT_MASK, + 1); + if (ret) + return ret; + + msleep(MAX31827_12_BIT_CNV_TIME); + } + ret = regmap_read(st->regmap, MAX31827_T_REG, &uval); + + mutex_unlock(&st->lock); + + *val = MAX31827_16_BIT_TO_M_DGR(uval); + + break; + case hwmon_temp_max: + ret = regmap_read(st->regmap, MAX31827_TH_REG, &uval); + *val = MAX31827_16_BIT_TO_M_DGR(uval); + break; + case hwmon_temp_max_hyst: + ret = regmap_read(st->regmap, MAX31827_TH_HYST_REG, + &uval); + *val = MAX31827_16_BIT_TO_M_DGR(uval); + break; + case hwmon_temp_max_alarm: + ret = regmap_read(st->regmap, + MAX31827_CONFIGURATION_REG, &uval); + *val = FIELD_GET(MAX31827_CONFIGURATION_O_TEMP_STAT_MASK, + uval); + break; + case hwmon_temp_min: + ret = regmap_read(st->regmap, MAX31827_TL_REG, &uval); + *val = MAX31827_16_BIT_TO_M_DGR(uval); + break; + case hwmon_temp_min_hyst: + ret = regmap_read(st->regmap, MAX31827_TL_HYST_REG, + &uval); + *val = MAX31827_16_BIT_TO_M_DGR(uval); + break; + case hwmon_temp_min_alarm: + ret = regmap_read(st->regmap, + MAX31827_CONFIGURATION_REG, &uval); + *val = FIELD_GET(MAX31827_CONFIGURATION_U_TEMP_STAT_MASK, + uval); + break; + default: + ret = -EOPNOTSUPP; + break; + } + + break; + + case hwmon_chip: + if (attr == hwmon_chip_update_interval) { + ret = regmap_read(st->regmap, + MAX31827_CONFIGURATION_REG, &uval); + uval = FIELD_GET(MAX31827_CONFIGURATION_CNV_RATE_MASK, + uval); + switch (uval) { + case MAX31827_CNV_1_DIV_64_HZ: + *val = 64000; + break; + case MAX31827_CNV_1_DIV_32_HZ: + *val = 32000; + break; + case MAX31827_CNV_1_DIV_16_HZ: + *val = 16000; + break; + case MAX31827_CNV_1_DIV_4_HZ: + *val = 4000; + break; + case MAX31827_CNV_1_HZ: + *val = 1000; + break; + case MAX31827_CNV_4_HZ: + *val = 250; + break; + case MAX31827_CNV_8_HZ: + *val = 125; + break; + default: + *val = 0; + break; + } + } + break; + + default: + ret = -EOPNOTSUPP; + break; + } + + if (ret) + return ret; + + return 0; +} + +static int max31827_write(struct device *dev, enum hwmon_sensor_types type, + u32 attr, int channel, long val) +{ + struct max31827_state *st = dev_get_drvdata(dev); + + switch (type) { + case hwmon_temp: + switch (attr) { + case hwmon_temp_enable: + if (val >> 1) + return -EOPNOTSUPP; + + st->enable = val; + + return regmap_update_bits(st->regmap, + MAX31827_CONFIGURATION_REG, + MAX31827_CONFIGURATION_1SHOT_MASK | + MAX31827_CONFIGURATION_CNV_RATE_MASK, + MAX31827_DEVICE_ENABLE(val)); + + case hwmon_temp_max: + return write_alarm_val(st, MAX31827_TH_REG, val); + + case hwmon_temp_max_hyst: + return write_alarm_val(st, MAX31827_TH_HYST_REG, val); + + case hwmon_temp_min: + return write_alarm_val(st, MAX31827_TL_REG, val); + + case hwmon_temp_min_hyst: + return write_alarm_val(st, MAX31827_TL_HYST_REG, val); + + default: + return -EOPNOTSUPP; + } + + case hwmon_chip: + if (attr == hwmon_chip_update_interval) { + switch (val) { + case 125: + val = MAX31827_CNV_8_HZ; + break; + case 250: + val = MAX31827_CNV_4_HZ; + break; + case 1000: + val = MAX31827_CNV_1_HZ; + break; + case 4000: + val = MAX31827_CNV_1_DIV_4_HZ; + break; + case 16000: + val = MAX31827_CNV_1_DIV_16_HZ; + break; + case 32000: + val = MAX31827_CNV_1_DIV_32_HZ; + break; + case 64000: + val = MAX31827_CNV_1_DIV_64_HZ; + break; + default: + val = 0; + break; + } + + if (!val) + return -EOPNOTSUPP; + + val = FIELD_PREP(MAX31827_CONFIGURATION_CNV_RATE_MASK, + val); + + return regmap_update_bits(st->regmap, + MAX31827_CONFIGURATION_REG, + MAX31827_CONFIGURATION_CNV_RATE_MASK, + val); + } + break; + + default: + return -EOPNOTSUPP; + } + + return -EOPNOTSUPP; +} + +static int max31827_init_client(struct max31827_state *st) +{ + st->enable = true; + + return regmap_update_bits(st->regmap, MAX31827_CONFIGURATION_REG, + MAX31827_CONFIGURATION_1SHOT_MASK | + MAX31827_CONFIGURATION_CNV_RATE_MASK, + MAX31827_DEVICE_ENABLE(1)); +} + +static const struct hwmon_channel_info *max31827_info[] = { + HWMON_CHANNEL_INFO(temp, HWMON_T_ENABLE | HWMON_T_INPUT | HWMON_T_MIN | + HWMON_T_MIN_HYST | HWMON_T_MIN_ALARM | + HWMON_T_MAX | HWMON_T_MAX_HYST | + HWMON_T_MAX_ALARM), + HWMON_CHANNEL_INFO(chip, HWMON_C_UPDATE_INTERVAL), + NULL, +}; + +static const struct hwmon_ops max31827_hwmon_ops = { + .is_visible = max31827_is_visible, + .read = max31827_read, + .write = max31827_write, +}; + +static const struct hwmon_chip_info max31827_chip_info = { + .ops = &max31827_hwmon_ops, + .info = max31827_info, +}; + +static int max31827_probe(struct i2c_client *client) +{ + struct device *dev = &client->dev; + struct device *hwmon_dev; + struct max31827_state *st; + int err; + + if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_WORD_DATA)) + return -EOPNOTSUPP; + + st = devm_kzalloc(dev, sizeof(*st), GFP_KERNEL); + if (!st) + return -ENOMEM; + + mutex_init(&st->lock); + + st->regmap = devm_regmap_init_i2c(client, &max31827_regmap); + if (IS_ERR(st->regmap)) + return dev_err_probe(dev, PTR_ERR(st->regmap), + "Failed to allocate regmap.\n"); + + err = max31827_init_client(st); + if (err) + return err; + + hwmon_dev = devm_hwmon_device_register_with_info(dev, client->name, st, + &max31827_chip_info, + NULL); + + return PTR_ERR_OR_ZERO(hwmon_dev); +} + +static const struct i2c_device_id max31827_i2c_ids[] = { + { "max31827", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, max31827_i2c_ids); + +static const struct of_device_id max31827_of_match[] = { + { .compatible = "max31827" }, + { } +}; +MODULE_DEVICE_TABLE(of, max31827_of_match); + +static struct i2c_driver max31827_driver = { + .class = I2C_CLASS_HWMON, + .driver = { + .name = "max31827", + .of_match_table = max31827_of_match, + }, + .probe_new = max31827_probe, + .id_table = max31827_i2c_ids, +}; +module_i2c_driver(max31827_driver); + +MODULE_AUTHOR("Daniel Matyas "); +MODULE_DESCRIPTION("Maxim MAX31827 low-power temperature switch driver"); +MODULE_LICENSE("GPL");