From patchwork Mon Aug 7 09:48:10 2023 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Julien Stephan X-Patchwork-Id: 13343235 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id 78AF1C001DE for ; Mon, 7 Aug 2023 09:50:14 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S230347AbjHGJuN (ORCPT ); Mon, 7 Aug 2023 05:50:13 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:37090 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S230484AbjHGJuL (ORCPT ); Mon, 7 Aug 2023 05:50:11 -0400 Received: from mail-wm1-x330.google.com (mail-wm1-x330.google.com [IPv6:2a00:1450:4864:20::330]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id D77CA1735 for ; Mon, 7 Aug 2023 02:50:02 -0700 (PDT) Received: by mail-wm1-x330.google.com with SMTP id 5b1f17b1804b1-3fe1e1142caso42912975e9.0 for ; Mon, 07 Aug 2023 02:50:02 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=baylibre-com.20221208.gappssmtp.com; s=20221208; t=1691401799; x=1692006599; h=content-transfer-encoding:mime-version:references:in-reply-to :message-id:date:subject:cc:to:from:from:to:cc:subject:date :message-id:reply-to; bh=hozU9zGuihMyLO4oaDd3zuznBlhpACn7i/jJjMASzyk=; b=fb3fFGmIAWrKY7oWVXJKUXfG6fPwkovCPyhb6hqE70y5uWovspzojgvw6MoXD7sANS TSKHXO3U4MNPViCPY/ITMB/koAEfCmqPjIPt6Rsa3QvRG0zpnPaEwW6/ZZ3rZD1LxrEH 8trYrLCXQAGFLnFY2fPyYbaZ/l2gCejaEVV3SGSo6Gm1ogqsKuUO8sXTOxDAy/BQmRhG q9qOXrAx6ECeO5MEWTAkv1KEn06/dN1JYgjOmn4DUql11IUSAicO3V2gCfpd1OGrwEws AUGZzvO4o3N4+3Q9LLFV0mZYGHJJNoQWkEb8dV7dHcR3QrD6+YOeNuPCCjlS+agnGHJy PSeA== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20221208; t=1691401799; x=1692006599; h=content-transfer-encoding:mime-version:references:in-reply-to :message-id:date:subject:cc:to:from:x-gm-message-state:from:to:cc :subject:date:message-id:reply-to; bh=hozU9zGuihMyLO4oaDd3zuznBlhpACn7i/jJjMASzyk=; b=KL1uDM1qaNgC7W/HO3yAMKnBv+SRkneSc2PZaFkRsZndgjimV6oz8j8wn25aVa2T8K ofG8rx21BavFBq9rVtTfmXj8NQ4Fa/ZN83pxpsfsoWwg+Dq5qvea01QapfVR/L+kABEv gwU3vYERK7I1NcefOomwtN8Rrnf4Fz1FPg9+2r9wlEvGrhwpxXy4zYrUQz8IKzCz6Tny 9m+uXGNh18dwPNJfo0wdVK5LBIZE47Mg5tmXqrOoi6FACpDpauQPpEv8NSvZlottyBhH 9ODtx5JePLnDBq8SipgVI5+vrzzO4iAkZ9f0HgLFwkhYWItBKGI4T0EQs3kXORXtiU9E 1qQw== X-Gm-Message-State: AOJu0YxpW4bFZnwT0woIXL7Y0Z4qGPvo8/2QYViFCi1HwYsTYIp9isdS QbYbTL7599EQxh1TSPrJCIBm8w== X-Google-Smtp-Source: AGHT+IGIY5+VxSlweqbcvOPzdSxJyb8qRscT8BgfVIF3bbg/RdpxJK4oGCC1oYoYYKku9pVgAwWjBw== X-Received: by 2002:a05:600c:20f:b0:3f8:c70e:7ed1 with SMTP id 15-20020a05600c020f00b003f8c70e7ed1mr7188839wmi.20.1691401799168; Mon, 07 Aug 2023 02:49:59 -0700 (PDT) Received: from localhost.localdomain ([2a01:e0a:55f:21e0:9e19:4376:dea6:dbfa]) by smtp.gmail.com with ESMTPSA id i11-20020a05600c2d8b00b003fe5228b78dsm2752429wmg.1.2023.08.07.02.49.58 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Mon, 07 Aug 2023 02:49:58 -0700 (PDT) From: Julien Stephan Cc: Louis Kuo , Phi-Bang Nguyen , Laurent Pinchart , Julien Stephan , Andy Hsieh , AngeloGioacchino Del Regno , Conor Dooley , daoyuan huang , devicetree@vger.kernel.org, Florian Sylvestre , Hans Verkuil , Krzysztof Kozlowski , linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, linux-mediatek@lists.infradead.org, linux-media@vger.kernel.org, Matthias Brugger , Mauro Carvalho Chehab , Moudy Ho , Rob Herring Subject: [PATCH v3 1/4] dt-bindings: media: add mediatek ISP3.0 sensor interface Date: Mon, 7 Aug 2023 11:48:10 +0200 Message-ID: <20230807094940.329165-2-jstephan@baylibre.com> X-Mailer: git-send-email 2.41.0 In-Reply-To: <20230807094940.329165-1-jstephan@baylibre.com> References: <20230807094940.329165-1-jstephan@baylibre.com> MIME-Version: 1.0 To: unlisted-recipients:; (no To-header on input) Precedence: bulk List-ID: X-Mailing-List: linux-media@vger.kernel.org From: Louis Kuo This adds the bindings, for the mediatek ISP3.0 SENINF module embedded in some Mediatek SoC, such as the mt8365 Signed-off-by: Louis Kuo Signed-off-by: Phi-Bang Nguyen Signed-off-by: Laurent Pinchart Signed-off-by: Julien Stephan --- .../media/mediatek,mt8365-seninf.yaml | 259 ++++++++++++++++++ MAINTAINERS | 7 + 2 files changed, 266 insertions(+) create mode 100644 Documentation/devicetree/bindings/media/mediatek,mt8365-seninf.yaml diff --git a/Documentation/devicetree/bindings/media/mediatek,mt8365-seninf.yaml b/Documentation/devicetree/bindings/media/mediatek,mt8365-seninf.yaml new file mode 100644 index 000000000000..0a7b7d949df7 --- /dev/null +++ b/Documentation/devicetree/bindings/media/mediatek,mt8365-seninf.yaml @@ -0,0 +1,259 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +# Copyright (c) 2023 MediaTek, BayLibre +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/mediatek,mt8365-seninf.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MediaTek Sensor Interface 3.0 + +maintainers: + - Laurent Pinchart + - Julien Stephan + - Andy Hsieh + +description: + The ISP3.0 SENINF is the CSI-2 and parallel camera sensor interface found in + multiple MediaTek SoCs. It can support up to three physical CSI-2 + input ports, configured in DPHY (2 or 4 data lanes) or CPHY depending on the soc. + On the output side, SENINF can be connected either to CAMSV instance or + to the internal ISP. CAMSV is used to bypass the internal ISP processing + in order to connect either an external ISP, or a sensor (RAW, YUV). + +properties: + compatible: + const: mediatek,mt8365-seninf + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + power-domains: + maxItems: 1 + + clocks: + items: + - description: Seninf camsys clock + - description: Seninf top mux clock + + clock-names: + items: + - const: camsys + - const: top_mux + + phys: + minItems: 1 + maxItems: 4 + description: + phandle to the PHYs connected to CSI0/A, CSI1, CSI2 and CSI0B + + phy-names: + minItems: 1 + items: + - const: csi0 + - const: csi1 + - const: csi2 + - const: csi0b + + ports: + $ref: /schemas/graph.yaml#/properties/ports + + properties: + port@0: + $ref: /schemas/graph.yaml#/$defs/port-base + unevaluatedProperties: false + description: CSI0 or CSI0A port + + properties: + endpoint: + $ref: video-interfaces.yaml# + unevaluatedProperties: false + + properties: + clock-lanes: + maxItems: 1 + data-lanes: + minItems: 1 + maxItems: 4 + + port@1: + $ref: /schemas/graph.yaml#/$defs/port-base + unevaluatedProperties: false + description: CSI1 port + + properties: + endpoint: + $ref: video-interfaces.yaml# + unevaluatedProperties: false + + properties: + clock-lanes: + maxItems: 1 + data-lanes: + minItems: 1 + maxItems: 4 + + port@2: + $ref: /schemas/graph.yaml#/$defs/port-base + unevaluatedProperties: false + description: CSI2 port + + properties: + endpoint: + $ref: video-interfaces.yaml# + unevaluatedProperties: false + + properties: + clock-lanes: + maxItems: 1 + data-lanes: + minItems: 1 + maxItems: 4 + + port@3: + $ref: /schemas/graph.yaml#/$defs/port-base + unevaluatedProperties: false + description: CSI0B port + + properties: + endpoint: + $ref: video-interfaces.yaml# + unevaluatedProperties: false + + properties: + clock-lanes: + maxItems: 1 + data-lanes: + minItems: 1 + maxItems: 2 + + port@4: + $ref: /schemas/graph.yaml#/properties/port + description: connection point for cam0 + + port@5: + $ref: /schemas/graph.yaml#/properties/port + description: connection point for cam1 + + port@6: + $ref: /schemas/graph.yaml#/properties/port + description: connection point for camsv0 + + port@7: + $ref: /schemas/graph.yaml#/properties/port + description: connection point for camsv1 + + port@8: + $ref: /schemas/graph.yaml#/properties/port + description: connection point for camsv2 + + port@9: + $ref: /schemas/graph.yaml#/properties/port + description: connection point for camsv3 + + required: + - port@0 + - port@1 + - port@2 + - port@3 + - port@4 + - port@5 + - port@6 + - port@7 + - port@8 + - port@9 + +required: + - compatible + - interrupts + - clocks + - clock-names + - power-domains + - ports + +additionalProperties: false + +examples: + - | + #include + #include + #include + #include + #include + + soc { + #address-cells = <2>; + #size-cells = <2>; + + seninf: seninf@15040000 { + compatible = "mediatek,mt8365-seninf"; + reg = <0 0x15040000 0 0x6000>; + interrupts = ; + clocks = <&camsys CLK_CAM_SENIF>, + <&topckgen CLK_TOP_SENIF_SEL>; + clock-names = "camsys", "top_mux"; + + power-domains = <&spm MT8365_POWER_DOMAIN_CAM>; + + phys = <&mipi_csi0 PHY_TYPE_DPHY>; + phy-names = "csi0"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + seninf_in1: endpoint { + clock-lanes = <2>; + data-lanes = <1 3 0 4>; + remote-endpoint = <&isp1_out>; + }; + }; + + port@1 { + reg = <1>; + }; + + port@2 { + reg = <2>; + }; + + port@3 { + reg = <3>; + }; + + port@4 { + reg = <4>; + seninf_camsv1_endpoint: endpoint { + remote-endpoint = <&camsv1_endpoint>; + }; + }; + + port@5 { + reg = <5>; + }; + + port@6 { + reg = <6>; + }; + + port@7 { + reg = <7>; + }; + + port@8 { + reg = <8>; + }; + + port@9 { + reg = <9>; + }; + + }; + }; + }; + +... diff --git a/MAINTAINERS b/MAINTAINERS index f14c1807067e..2997ec387cc0 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -13359,6 +13359,13 @@ M: Sean Wang S: Maintained F: drivers/char/hw_random/mtk-rng.c +MEDIATEK ISP3.0 DRIVER +M: Laurent Pinchart +M: Julien Stephan +M: Andy Hsieh +S: Supported +F: Documentation/devicetree/bindings/media/mediatek,mt8365-seninf.yaml + MEDIATEK SMI DRIVER M: Yong Wu L: linux-mediatek@lists.infradead.org (moderated for non-subscribers) From patchwork Mon Aug 7 09:48:11 2023 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Julien Stephan X-Patchwork-Id: 13343236 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id F1089C001B0 for ; Mon, 7 Aug 2023 09:50:31 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S231712AbjHGJua (ORCPT ); Mon, 7 Aug 2023 05:50:30 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:37448 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S231716AbjHGJu1 (ORCPT ); Mon, 7 Aug 2023 05:50:27 -0400 Received: from mail-lj1-x22c.google.com (mail-lj1-x22c.google.com [IPv6:2a00:1450:4864:20::22c]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 3F3D41991 for ; Mon, 7 Aug 2023 02:50:16 -0700 (PDT) Received: by mail-lj1-x22c.google.com with SMTP id 38308e7fff4ca-2b9db1de50cso65215471fa.3 for ; Mon, 07 Aug 2023 02:50:16 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=baylibre-com.20221208.gappssmtp.com; s=20221208; t=1691401813; x=1692006613; h=content-transfer-encoding:mime-version:references:in-reply-to :message-id:date:subject:cc:to:from:from:to:cc:subject:date :message-id:reply-to; bh=FSRzV+q20+Zz62jyN4jl8ijqU9O8kNXZLvQCodRr2Rc=; b=NppH2T/4JzmtzGWmRVOb1a89w8JFZaK7o3GntrBbYfBQI9eCMNDDmXwkpT5M72NLS1 JzcouqqgfkHmJGWM/xzWv1UlJpTp5IB+Bn7AK9G+sA6n6/ccoyC3aSyFUKHMsOv1Ht8m LIzkohxjs9z1O2D6qM4QJUagFotlTlGLK6M494jJ3LuIxSalrFdpPw/NEz4KLbS4ft+Y qiSKyUcyeTk8f+ANaIgFHQLq+Fm2vY9Fx6+t9iZJ3hCFTblKAbmSYi9YGU8xN9HzuQLE yNBdU6cuxEWneMofKIeWUqp83xZZhofqrIJcymVAPhxTuqiYvxUEcP7QgrN8pmYc2JMz mamw== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20221208; t=1691401813; x=1692006613; h=content-transfer-encoding:mime-version:references:in-reply-to :message-id:date:subject:cc:to:from:x-gm-message-state:from:to:cc :subject:date:message-id:reply-to; bh=FSRzV+q20+Zz62jyN4jl8ijqU9O8kNXZLvQCodRr2Rc=; b=B5toRPGvcs/gI4lRtOrzLfPA4ep9VDKzkGKF4e/n2d4xmtt7PBEUP4CkvD6f79Jhj1 YEDzqgFyRsKqQIEc4mtg8E8uuOY8DK9gPtKfzaXMKnjTxMhj4jgtl8OwhwkMGvltevnf k38p5ZQkR/tUR1d4+HSXjIFeM7fvMichSpq0UpzaSNtLDMm7dSLlHsgSv9drtVoAiLsN gv0bCh8rPUYEplMnpNAXTBthgpEJXOu2c9oHmoz0OOgb9SWIDsptqeAAAn8mAYCDjCOm KcUxN8qqwTyb0KCXVn/c7zZJ+01X5PJUnpR55G+kuP4N6sVE4jAOonM9e5BCCwjNK5LY D9iw== X-Gm-Message-State: AOJu0YzBomm06w38qwg7vgiuVBNRzVFq9/iLaj5/A6fA/G5M4KLLrDj2 YzWXRFp4EqyRasRqrsDdWH7GxQ== X-Google-Smtp-Source: AGHT+IFFowjqeoynm6oTJOofvbAaPczQ7H3r1pF3z6e4lkysbZVVCUdB9iiNBUIpstWmeOaDqLi2OQ== X-Received: by 2002:a2e:780b:0:b0:2b9:da28:c50b with SMTP id t11-20020a2e780b000000b002b9da28c50bmr6082836ljc.16.1691401813125; Mon, 07 Aug 2023 02:50:13 -0700 (PDT) Received: from localhost.localdomain ([2a01:e0a:55f:21e0:9e19:4376:dea6:dbfa]) by smtp.gmail.com with ESMTPSA id i11-20020a05600c2d8b00b003fe5228b78dsm2752429wmg.1.2023.08.07.02.50.12 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Mon, 07 Aug 2023 02:50:12 -0700 (PDT) From: Julien Stephan Cc: Louis Kuo , Phi-bang Nguyen , Florian Sylvestre , Laurent Pinchart , Julien Stephan , Andy Hsieh , AngeloGioacchino Del Regno , Conor Dooley , devicetree@vger.kernel.org, Hans Verkuil , Krzysztof Kozlowski , linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, linux-mediatek@lists.infradead.org, linux-media@vger.kernel.org, Matthias Brugger , Mauro Carvalho Chehab , Moudy Ho , Ping-Hsun Wu , Rob Herring Subject: [PATCH v3 2/4] media: platform: mediatek: isp_30: add mediatek ISP3.0 sensor interface Date: Mon, 7 Aug 2023 11:48:11 +0200 Message-ID: <20230807094940.329165-3-jstephan@baylibre.com> X-Mailer: git-send-email 2.41.0 In-Reply-To: <20230807094940.329165-1-jstephan@baylibre.com> References: <20230807094940.329165-1-jstephan@baylibre.com> MIME-Version: 1.0 To: unlisted-recipients:; (no To-header on input) Precedence: bulk List-ID: X-Mailing-List: linux-media@vger.kernel.org From: Louis Kuo This will add the mediatek ISP3.0 seninf (sensor interface) driver found on several Mediatek SoCs such as the mt8365. Then seninf module has 4 physical CSI-2 inputs. Depending on the soc they may not be all connected. Signed-off-by: Louis Kuo Signed-off-by: Phi-bang Nguyen Signed-off-by: Florian Sylvestre Signed-off-by: Laurent Pinchart Signed-off-by: Julien Stephan --- MAINTAINERS | 1 + drivers/media/platform/mediatek/Kconfig | 1 + drivers/media/platform/mediatek/Makefile | 1 + drivers/media/platform/mediatek/isp/Kconfig | 2 + drivers/media/platform/mediatek/isp/Makefile | 3 + .../platform/mediatek/isp/isp_30/Kconfig | 16 + .../platform/mediatek/isp/isp_30/Makefile | 3 + .../mediatek/isp/isp_30/seninf/Makefile | 5 + .../mediatek/isp/isp_30/seninf/mtk_seninf.c | 1491 +++++++++++++++++ .../isp/isp_30/seninf/mtk_seninf_reg.h | 112 ++ 10 files changed, 1635 insertions(+) create mode 100644 drivers/media/platform/mediatek/isp/Kconfig create mode 100644 drivers/media/platform/mediatek/isp/Makefile create mode 100644 drivers/media/platform/mediatek/isp/isp_30/Kconfig create mode 100644 drivers/media/platform/mediatek/isp/isp_30/Makefile create mode 100644 drivers/media/platform/mediatek/isp/isp_30/seninf/Makefile create mode 100644 drivers/media/platform/mediatek/isp/isp_30/seninf/mtk_seninf.c create mode 100644 drivers/media/platform/mediatek/isp/isp_30/seninf/mtk_seninf_reg.h diff --git a/MAINTAINERS b/MAINTAINERS index 2997ec387cc0..c5a97f692422 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -13365,6 +13365,7 @@ M: Julien Stephan M: Andy Hsieh S: Supported F: Documentation/devicetree/bindings/media/mediatek,mt8365-seninf.yaml +F: drivers/media/platform/mediatek/isp/isp_30/seninf/* MEDIATEK SMI DRIVER M: Yong Wu diff --git a/drivers/media/platform/mediatek/Kconfig b/drivers/media/platform/mediatek/Kconfig index 84104e2cd024..4e0a5a43f35e 100644 --- a/drivers/media/platform/mediatek/Kconfig +++ b/drivers/media/platform/mediatek/Kconfig @@ -7,3 +7,4 @@ source "drivers/media/platform/mediatek/mdp/Kconfig" source "drivers/media/platform/mediatek/vcodec/Kconfig" source "drivers/media/platform/mediatek/vpu/Kconfig" source "drivers/media/platform/mediatek/mdp3/Kconfig" +source "drivers/media/platform/mediatek/isp/Kconfig" diff --git a/drivers/media/platform/mediatek/Makefile b/drivers/media/platform/mediatek/Makefile index 38e6ba917fe5..695f05f525a6 100644 --- a/drivers/media/platform/mediatek/Makefile +++ b/drivers/media/platform/mediatek/Makefile @@ -4,3 +4,4 @@ obj-y += mdp/ obj-y += vcodec/ obj-y += vpu/ obj-y += mdp3/ +obj-y += isp/ diff --git a/drivers/media/platform/mediatek/isp/Kconfig b/drivers/media/platform/mediatek/isp/Kconfig new file mode 100644 index 000000000000..708b9a6660d2 --- /dev/null +++ b/drivers/media/platform/mediatek/isp/Kconfig @@ -0,0 +1,2 @@ +# SPDX-License-Identifier: GPL-2.0-only +source "drivers/media/platform/mediatek/isp/isp_30/Kconfig" diff --git a/drivers/media/platform/mediatek/isp/Makefile b/drivers/media/platform/mediatek/isp/Makefile new file mode 100644 index 000000000000..a81ab33d0dd3 --- /dev/null +++ b/drivers/media/platform/mediatek/isp/Makefile @@ -0,0 +1,3 @@ +# SPDX-License-Identifier: GPL-2.0-only + +obj-y += isp_30/ diff --git a/drivers/media/platform/mediatek/isp/isp_30/Kconfig b/drivers/media/platform/mediatek/isp/isp_30/Kconfig new file mode 100644 index 000000000000..9791312589fb --- /dev/null +++ b/drivers/media/platform/mediatek/isp/isp_30/Kconfig @@ -0,0 +1,16 @@ +# SPDX-License-Identifier: GPL-2.0-only +config MTK_SENINF30 + tristate "MediaTek ISP3.0 SENINF driver" + depends on VIDEO_V4L2_SUBDEV_API + depends on MEDIA_CAMERA_SUPPORT + depends on ARCH_MEDIATEK || COMPILE_TEST + depends on OF + select V4L2_FWNODE + default n + help + This driver provides a MIPI CSI-2 receiver interface to connect + an external camera module with MediaTek ISP3.0. It is able to handle + multiple cameras at the same time. + + To compile this driver as a module, choose M here: the + module will be called mtk-seninf. diff --git a/drivers/media/platform/mediatek/isp/isp_30/Makefile b/drivers/media/platform/mediatek/isp/isp_30/Makefile new file mode 100644 index 000000000000..ac3142de4739 --- /dev/null +++ b/drivers/media/platform/mediatek/isp/isp_30/Makefile @@ -0,0 +1,3 @@ +# SPDX-License-Identifier: GPL-2.0 + +obj-$(CONFIG_MTK_SENINF30) += seninf/ diff --git a/drivers/media/platform/mediatek/isp/isp_30/seninf/Makefile b/drivers/media/platform/mediatek/isp/isp_30/seninf/Makefile new file mode 100644 index 000000000000..f28480d6d6c3 --- /dev/null +++ b/drivers/media/platform/mediatek/isp/isp_30/seninf/Makefile @@ -0,0 +1,5 @@ +# SPDX-License-Identifier: GPL-2.0 + +mtk-seninf-objs += mtk_seninf.o + +obj-$(CONFIG_MTK_SENINF30) += mtk-seninf.o diff --git a/drivers/media/platform/mediatek/isp/isp_30/seninf/mtk_seninf.c b/drivers/media/platform/mediatek/isp/isp_30/seninf/mtk_seninf.c new file mode 100644 index 000000000000..bed9cd3dc8ca --- /dev/null +++ b/drivers/media/platform/mediatek/isp/isp_30/seninf/mtk_seninf.c @@ -0,0 +1,1491 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (c) 2022 MediaTek Inc. + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "mtk_seninf_reg.h" + +#define SENINF_TIMESTAMP_STEP 0x67 +#define SENINF_SETTLE_DELAY 0x15 +#define SENINF_HS_TRAIL_PARAMETER 0x8 + +#define SENINF_MAX_NUM_INPUTS 4 +#define SENINF_MAX_NUM_OUTPUTS 6 +#define SENINF_MAX_NUM_MUXES 6 +#define SENINF_MAX_NUM_PADS (SENINF_MAX_NUM_INPUTS + \ + SENINF_MAX_NUM_OUTPUTS) + +#define SENINF_DEFAULT_BUS_FMT MEDIA_BUS_FMT_SGRBG10_1X10 +#define SENINF_DEFAULT_WIDTH 1920 +#define SENINF_DEFAULT_HEIGHT 1080 + +#define SENINF_PAD_10BIT 0 + +#define SENINF_TEST_MODEL 0 +#define SENINF_NORMAL_MODEL 1 +#define SENINF_ALL_ERR_IRQ_EN 0x7f +#define SENINF_IRQ_CLR_SEL 0x80000000 + +#define SENINF_MIPI_SENSOR 0x8 + +#define MTK_CSI_MAX_LANES 4 + +/* Port number in the device tree. */ +enum mtk_seninf_port { + CSI_PORT_0 = 0, /* 4D1C or 2D1C */ + CSI_PORT_1, /* 4D1C */ + CSI_PORT_2, /* 4D1C */ + CSI_PORT_0B, /* 2D1C */ +}; + +enum mtk_seninf_id { + SENINF_1 = 0, + SENINF_2 = 1, + SENINF_3 = 2, + SENINF_5 = 4, +}; + +static const u32 port_to_seninf_id[] = { + [CSI_PORT_0] = SENINF_1, + [CSI_PORT_1] = SENINF_3, + [CSI_PORT_2] = SENINF_5, + [CSI_PORT_0B] = SENINF_2, +}; + +enum mtk_seninf_phy_mode { + SENINF_PHY_MODE_NONE, + SENINF_PHY_MODE_4D1C, + SENINF_PHY_MODE_2D1C, +}; + +enum mtk_seninf_format_flag { + MTK_SENINF_FORMAT_BAYER = BIT(0), + MTK_SENINF_FORMAT_DPCM = BIT(1), + MTK_SENINF_FORMAT_JPEG = BIT(2), + MTK_SENINF_FORMAT_INPUT_ONLY = BIT(3), +}; + +/** + * struct mtk_seninf_conf - Model-specific SENINF parameters + * @model: Model description + * @nb_inputs: Number of SENINF inputs + * @nb_muxes: Number of SENINF MUX (FIFO) instances + * @nb_outputs: Number of outputs (to CAM and CAMSV instances) + */ +struct mtk_seninf_conf { + const char *model; + u8 nb_inputs; + u8 nb_muxes; + u8 nb_outputs; +}; + +/** + * struct mtk_seninf_format_info - Information about media bus formats + * @code: V4L2 media bus code + * @flags: Flags describing the format, as a combination of MTK_SENINF_FORMAT_* + */ +struct mtk_seninf_format_info { + u32 code; + u32 flags; +}; + +/** + * struct mtk_seninf_input - SENINF input block + * @pad: DT port and media entity pad number + * @seninf_id: SENINF hardware instance ID + * @base: Memory mapped I/O based address + * @seninf: Back pointer to the mtk_seninf + * @phy: PHY connected to the input + * @phy_mode: PHY operation mode (NONE when the input is not connected) + * @bus: CSI-2 bus configuration from DT + * @source_sd: Source subdev connected to the input + */ +struct mtk_seninf_input { + enum mtk_seninf_port pad; + enum mtk_seninf_id seninf_id; + void __iomem *base; + struct mtk_seninf *seninf; + + struct phy *phy; + enum mtk_seninf_phy_mode phy_mode; + + struct v4l2_mbus_config_mipi_csi2 bus; + + struct v4l2_subdev *source_sd; +}; + +/** + * struct mtk_seninf_mux - SENINF MUX channel + * @pad: DT port and media entity pad number + * @mux_id: MUX hardware instance ID + * @base: Memory mapped I/O based address + * @seninf: Back pointer to the mtk_seninf + */ +struct mtk_seninf_mux { + unsigned int pad; + unsigned int mux_id; + void __iomem *base; + struct mtk_seninf *seninf; +}; + +/** + * struct mtk_seninf - Top-level SENINF device + * @dev: The (platform) device + * @phy: PHYs at the SENINF inputs + * @num_clks: Number of clocks in the clks array + * @clks: Clocks + * @base: Memory mapped I/O base address + * @media_dev: Media controller device + * @v4l2_dev: V4L2 device + * @subdev: V4L2 subdevice + * @pads: Media entity pads + * @notifier: V4L2 async notifier for source subdevs + * @ctrl_handler: V4L2 controls handler + * @source_format: Active format on the source pad + * @inputs: Array of SENINF inputs + * @muxes: Array of MUXes + * @conf: Model-specific SENINF parameters + * @is_testmode: Whether or not the test pattern generator is enabled + */ +struct mtk_seninf { + struct device *dev; + struct phy *phy[5]; + unsigned int num_clks; + struct clk_bulk_data *clks; + void __iomem *base; + + struct media_device media_dev; + struct v4l2_device v4l2_dev; + struct v4l2_subdev subdev; + struct media_pad pads[SENINF_MAX_NUM_PADS]; + struct v4l2_async_notifier notifier; + struct v4l2_ctrl_handler ctrl_handler; + + struct mtk_seninf_input inputs[SENINF_MAX_NUM_INPUTS]; + struct mtk_seninf_mux muxes[SENINF_MAX_NUM_MUXES]; + + const struct mtk_seninf_conf *conf; + + bool is_testmode; +}; + +inline struct mtk_seninf *sd_to_mtk_seninf(struct v4l2_subdev *sd) +{ + return container_of(sd, struct mtk_seninf, subdev); +} + +static inline bool mtk_seninf_pad_is_sink(struct mtk_seninf *priv, + unsigned int pad) +{ + return pad < priv->conf->nb_inputs; +} + +static inline bool mtk_seninf_pad_is_source(struct mtk_seninf *priv, + unsigned int pad) +{ + return !mtk_seninf_pad_is_sink(priv, pad); +} + +/* ----------------------------------------------------------------------------- + * Formats + */ + +static const struct mtk_seninf_format_info mtk_seninf_formats[] = { + { + .code = MEDIA_BUS_FMT_SBGGR8_1X8, + .flags = MTK_SENINF_FORMAT_BAYER, + }, { + .code = MEDIA_BUS_FMT_SGBRG8_1X8, + .flags = MTK_SENINF_FORMAT_BAYER, + }, { + .code = MEDIA_BUS_FMT_SGRBG8_1X8, + .flags = MTK_SENINF_FORMAT_BAYER, + }, { + .code = MEDIA_BUS_FMT_SRGGB8_1X8, + .flags = MTK_SENINF_FORMAT_BAYER, + }, { + .code = MEDIA_BUS_FMT_SGRBG10_1X10, + .flags = MTK_SENINF_FORMAT_BAYER, + }, { + .code = MEDIA_BUS_FMT_SRGGB10_1X10, + .flags = MTK_SENINF_FORMAT_BAYER, + }, { + .code = MEDIA_BUS_FMT_SBGGR10_1X10, + .flags = MTK_SENINF_FORMAT_BAYER, + }, { + .code = MEDIA_BUS_FMT_SGBRG10_1X10, + .flags = MTK_SENINF_FORMAT_BAYER, + }, { + .code = MEDIA_BUS_FMT_SBGGR12_1X12, + .flags = MTK_SENINF_FORMAT_BAYER, + }, { + .code = MEDIA_BUS_FMT_SGBRG12_1X12, + .flags = MTK_SENINF_FORMAT_BAYER, + }, { + .code = MEDIA_BUS_FMT_SGRBG12_1X12, + .flags = MTK_SENINF_FORMAT_BAYER, + }, { + .code = MEDIA_BUS_FMT_SRGGB12_1X12, + .flags = MTK_SENINF_FORMAT_BAYER, + }, { + .code = MEDIA_BUS_FMT_SBGGR14_1X14, + .flags = MTK_SENINF_FORMAT_BAYER, + }, { + .code = MEDIA_BUS_FMT_SGBRG14_1X14, + .flags = MTK_SENINF_FORMAT_BAYER, + }, { + .code = MEDIA_BUS_FMT_SGRBG14_1X14, + .flags = MTK_SENINF_FORMAT_BAYER, + }, { + .code = MEDIA_BUS_FMT_SRGGB14_1X14, + .flags = MTK_SENINF_FORMAT_BAYER, + }, { + .code = MEDIA_BUS_FMT_SBGGR16_1X16, + .flags = MTK_SENINF_FORMAT_BAYER, + }, { + .code = MEDIA_BUS_FMT_SGBRG16_1X16, + .flags = MTK_SENINF_FORMAT_BAYER, + }, { + .code = MEDIA_BUS_FMT_SGRBG16_1X16, + .flags = MTK_SENINF_FORMAT_BAYER, + }, { + .code = MEDIA_BUS_FMT_SRGGB16_1X16, + .flags = MTK_SENINF_FORMAT_BAYER, + }, { + .code = MEDIA_BUS_FMT_UYVY8_1X16, + }, { + .code = MEDIA_BUS_FMT_VYUY8_1X16, + }, { + .code = MEDIA_BUS_FMT_YUYV8_1X16, + }, { + .code = MEDIA_BUS_FMT_YVYU8_1X16, + }, { + .code = MEDIA_BUS_FMT_JPEG_1X8, + .flags = MTK_SENINF_FORMAT_JPEG, + }, { + .code = MEDIA_BUS_FMT_S5C_UYVY_JPEG_1X8, + .flags = MTK_SENINF_FORMAT_JPEG, + }, + /* Keep the input-only formats last. */ + { + .code = MEDIA_BUS_FMT_SGRBG10_DPCM8_1X8, + .flags = MTK_SENINF_FORMAT_DPCM | MTK_SENINF_FORMAT_INPUT_ONLY, + }, { + .code = MEDIA_BUS_FMT_SRGGB10_DPCM8_1X8, + .flags = MTK_SENINF_FORMAT_DPCM | MTK_SENINF_FORMAT_INPUT_ONLY, + }, { + .code = MEDIA_BUS_FMT_SBGGR10_DPCM8_1X8, + .flags = MTK_SENINF_FORMAT_DPCM | MTK_SENINF_FORMAT_INPUT_ONLY, + }, { + .code = MEDIA_BUS_FMT_SGBRG10_DPCM8_1X8, + .flags = MTK_SENINF_FORMAT_DPCM | MTK_SENINF_FORMAT_INPUT_ONLY, + } +}; + +static const struct mtk_seninf_format_info *mtk_seninf_format_info(u32 code) +{ + unsigned int i; + + for (i = 0; i < ARRAY_SIZE(mtk_seninf_formats); ++i) { + if (mtk_seninf_formats[i].code == code) + return &mtk_seninf_formats[i]; + } + + return NULL; +} + +static void __mtk_seninf_update(struct mtk_seninf *priv, u32 reg, + u32 mask, u32 value) +{ + u32 val = readl(priv->base + reg); + + writel((val & ~mask) | (value & mask), priv->base + reg); +} + +#define mtk_seninf_update(priv, reg, field, val) \ + __mtk_seninf_update(priv, reg, reg##_##field, \ + FIELD_PREP(reg##_##field, val)) + +static void __mtk_seninf_input_update(struct mtk_seninf_input *input, u32 reg, + u32 mask, u32 value) +{ + u32 val = readl(input->base + reg); + + writel((val & ~mask) | (value & mask), input->base + reg); +} + +#define mtk_seninf_input_update(input, reg, field, val) \ + __mtk_seninf_input_update(input, reg, reg##_##field, \ + FIELD_PREP(reg##_##field, val)) + +static u32 mtk_seninf_mux_read(struct mtk_seninf_mux *mux, u32 reg) +{ + return readl(mux->base + reg); +} + +static void mtk_seninf_mux_write(struct mtk_seninf_mux *mux, u32 reg, + u32 value) +{ + writel(value, mux->base + reg); +} + +static void __mtk_seninf_mux_update(struct mtk_seninf_mux *mux, u32 reg, + u32 mask, u32 value) +{ + u32 val = mtk_seninf_mux_read(mux, reg); + + mtk_seninf_mux_write(mux, reg, (val & ~mask) | (value & mask)); +} + +#define mtk_seninf_mux_update(mux, reg, field, val) \ + __mtk_seninf_mux_update(mux, reg, reg##_##field, \ + FIELD_PREP(reg##_##field, val)) + +/* ----------------------------------------------------------------------------- + * Hardware Configuration + * + * The SENINF is the camera sensor interface. On the input side it contains + * input channels (also named SENINF), each made of a CSI-2 receiver, an + * interface for parallel sensors, and a test pattern generator. The inputs are + * routed through a N:M crossbar switch (TOP MUX) to VC/DT filters with a FIFO + * (MUX). The MUX are routed to another N:M crossbar switch (CAM MUX), whose + * output is then connected to other IP cores. + * + * +-------------------------------------------------------+ + * | SENINF | + * | | + * +-------+ | +----------+ TOP MUX | + * | | | | SENINF | |\ CAM MUX | + * | D-PHY | ---> | CSI-2 RX | ---> | | +------------+ |\ | + * | | | | TPG | -> | | ---> | MUX (FIFO) | ---> | | ---> CAMSV + * +-------+ | +----------+ -> | | +------------+ -> | | | + * | |/ -> | | | + * | |/ | + * | | + * ... | ... ... ---> + * | | + * | | + * +-------------------------------------------------------+ + * + * The number of PHYs, SENINF and MUX differ between SoCs. MT8167 has a single + * MUX and thus no output CAM MUX crossbar switch. + */ + +static void mtk_seninf_csi2_setup_phy(struct mtk_seninf *priv) +{ + /* CSI0 */ + if (priv->inputs[CSI_PORT_0].phy) { + struct mtk_seninf_input *input = &priv->inputs[CSI_PORT_0]; + + mtk_seninf_update(priv, SENINF_TOP_PHY_SENINF_CTL_CSI0, + DPHY_MODE, 0 /* 4D1C*/); + mtk_seninf_update(priv, SENINF_TOP_PHY_SENINF_CTL_CSI0, + CK_SEL_1, input->bus.clock_lane); + mtk_seninf_update(priv, SENINF_TOP_PHY_SENINF_CTL_CSI0, + CK_SEL_2, 2); + mtk_seninf_update(priv, SENINF_TOP_PHY_SENINF_CTL_CSI0, + PHY_SENINF_LANE_MUX_CSI0_EN, 1); + } + + /* CSI1 */ + if (priv->inputs[CSI_PORT_1].phy) { + struct mtk_seninf_input *input = &priv->inputs[CSI_PORT_1]; + + mtk_seninf_update(priv, SENINF_TOP_PHY_SENINF_CTL_CSI1, + DPHY_MODE, 0 /* 4D1C */); + mtk_seninf_update(priv, SENINF_TOP_PHY_SENINF_CTL_CSI1, + CK_SEL_1, input->bus.clock_lane); + mtk_seninf_update(priv, SENINF_TOP_PHY_SENINF_CTL_CSI1, + PHY_SENINF_LANE_MUX_CSI1_EN, 1); + } +} + +static void mtk_seninf_input_setup_csi2_rx(struct mtk_seninf_input *input) +{ + unsigned int lanes[MTK_CSI_MAX_LANES] = { }; + unsigned int i; + + /* + * Configure data lane muxing. In 2D1C mode, lanes 0 to 2 correspond to + * CSIx[AB]_L{0,1,2}, and in 4D1C lanes 0 to 5 correspond to + * CSIxA_L{0,1,2}, CSIxB_L{0,1,2}. + * + * The clock lane must be skipped when calculating the index of the + * physical data lane. For instance, in 4D1C mode, the sensor clock + * lane is typically connected to lane 2 (CSIxA_L2), and the sensor + * data lanes 0-3 to lanes 1 (CSIxA_L1), 3 (CSIxB_L0), 0 (CSIxA_L0) and + * 4 (CSIxB_L1). The when skipping the clock lane, the data lane + * indices become 1, 2, 0 and 3. + */ + for (i = 0; i < input->bus.num_data_lanes; ++i) { + lanes[i] = input->bus.data_lanes[i]; + if (lanes[i] > input->bus.clock_lane) + lanes[i]--; + } + + mtk_seninf_input_update(input, MIPI_RX_CON24_CSI0, CSI0_BIST_LN0_MUX, lanes[0]); + mtk_seninf_input_update(input, MIPI_RX_CON24_CSI0, CSI0_BIST_LN1_MUX, lanes[1]); + mtk_seninf_input_update(input, MIPI_RX_CON24_CSI0, CSI0_BIST_LN2_MUX, lanes[2]); + mtk_seninf_input_update(input, MIPI_RX_CON24_CSI0, CSI0_BIST_LN3_MUX, lanes[3]); +} + +static void mtk_seninf_input_setup_csi2(struct mtk_seninf_input *input, + struct v4l2_subdev_state *state) +{ + const struct mtk_seninf_format_info *fmtinfo; + const struct v4l2_mbus_framefmt *format; + unsigned int num_data_lanes = input->bus.num_data_lanes; + unsigned int val = 0; + + format = v4l2_subdev_state_get_stream_format(state, input->pad, 0); + fmtinfo = mtk_seninf_format_info(format->code); + + /* Configure timestamp */ + writel(SENINF_TIMESTAMP_STEP, input->base + SENINF_TG1_TM_STP); + + /* HQ */ + writel(0x0, input->base + SENINF_TG1_PH_CNT); + writel(0x10001, input->base + SENINF_TG1_SEN_CK); + + /* First Enable Sensor interface and select pad (0x1a04_0200) */ + mtk_seninf_input_update(input, SENINF_CTRL, SENINF_EN, 1); + mtk_seninf_input_update(input, SENINF_CTRL, PAD2CAM_DATA_SEL, SENINF_PAD_10BIT); + mtk_seninf_input_update(input, SENINF_CTRL, SENINF_SRC_SEL, 0); + mtk_seninf_input_update(input, SENINF_CTRL_EXT, SENINF_CSI2_IP_EN, 1); + mtk_seninf_input_update(input, SENINF_CTRL_EXT, SENINF_NCSI2_IP_EN, 0); + + /* DPCM Enable */ + if (fmtinfo->flags & MTK_SENINF_FORMAT_DPCM) + val = SENINF_CSI2_DPCM_DI_2A_DPCM_EN; + else + val = SENINF_CSI2_DPCM_DI_30_DPCM_EN; + writel(val, input->base + SENINF_CSI2_DPCM); + + /* Settle delay */ + mtk_seninf_input_update(input, SENINF_CSI2_LNRD_TIMING, + DATA_SETTLE_PARAMETER, SENINF_SETTLE_DELAY); + + /* HQ */ + writel(0x10, input->base + SENINF_CSI2_LNRC_FSM); + + /* CSI2 control */ + val = readl(input->base + SENINF_CSI2_CTL) + | (FIELD_PREP(SENINF_CSI2_CTL_ED_SEL, DATA_HEADER_ORDER_DI_WCL_WCH) + | SENINF_CSI2_CTL_CLOCK_LANE_EN | (BIT(num_data_lanes) - 1)); + writel(val, input->base + SENINF_CSI2_CTL); + + mtk_seninf_input_update(input, SENINF_CSI2_RESYNC_MERGE_CTL, + BYPASS_LANE_RESYNC, 0); + mtk_seninf_input_update(input, SENINF_CSI2_RESYNC_MERGE_CTL, CDPHY_SEL, 0); + mtk_seninf_input_update(input, SENINF_CSI2_RESYNC_MERGE_CTL, + CPHY_LANE_RESYNC_CNT, 3); + mtk_seninf_input_update(input, SENINF_CSI2_MODE, CSR_CSI2_MODE, 0); + mtk_seninf_input_update(input, SENINF_CSI2_MODE, CSR_CSI2_HEADER_LEN, 0); + mtk_seninf_input_update(input, SENINF_CSI2_DPHY_SYNC, SYNC_SEQ_MASK_0, 0xff00); + mtk_seninf_input_update(input, SENINF_CSI2_DPHY_SYNC, SYNC_SEQ_PAT_0, 0x001d); + + mtk_seninf_input_update(input, SENINF_CSI2_CTL, CLOCK_HS_OPTION, 0); + mtk_seninf_input_update(input, SENINF_CSI2_CTL, HSRX_DET_EN, 0); + mtk_seninf_input_update(input, SENINF_CSI2_CTL, HS_TRAIL_EN, 1); + mtk_seninf_input_update(input, SENINF_CSI2_HS_TRAIL, HS_TRAIL_PARAMETER, + SENINF_HS_TRAIL_PARAMETER); + + /* Set debug port to output packet number */ + mtk_seninf_input_update(input, SENINF_CSI2_DGB_SEL, DEBUG_EN, 1); + mtk_seninf_input_update(input, SENINF_CSI2_DGB_SEL, DEBUG_SEL, 0x1a); + + /* HQ */ + writel(0xfffffffe, input->base + SENINF_CSI2_SPARE0); + + /* Enable CSI2 IRQ mask */ + /* Turn on all interrupt */ + writel(0xffffffff, input->base + SENINF_CSI2_INT_EN); + /* Write clear CSI2 IRQ */ + writel(0xffffffff, input->base + SENINF_CSI2_INT_STATUS); + /* Enable CSI2 Extend IRQ mask */ + /* Turn on all interrupt */ + mtk_seninf_input_update(input, SENINF_CTRL, CSI2_SW_RST, 1); + udelay(1); + mtk_seninf_input_update(input, SENINF_CTRL, CSI2_SW_RST, 0); +} + +static void mtk_seninf_mux_setup(struct mtk_seninf_mux *mux, + struct mtk_seninf_input *input, + struct v4l2_subdev_state *state) +{ + const struct mtk_seninf_format_info *fmtinfo; + const struct v4l2_mbus_framefmt *format; + unsigned int pix_sel_ext; + unsigned int pix_sel; + unsigned int hs_pol = 0; + unsigned int vs_pol = 0; + unsigned int val; + u32 rst_mask; + + format = v4l2_subdev_state_get_stream_format(state, input->pad, 0); + fmtinfo = mtk_seninf_format_info(format->code); + + /* Enable mux */ + mtk_seninf_mux_update(mux, SENINF_MUX_CTRL, SENINF_MUX_EN, 1); + mtk_seninf_mux_update(mux, SENINF_MUX_CTRL, SENINF_SRC_SEL, SENINF_MIPI_SENSOR); + mtk_seninf_mux_update(mux, SENINF_MUX_CTRL_EXT, SENINF_SRC_SEL_EXT, SENINF_NORMAL_MODEL); + + pix_sel_ext = 0; + pix_sel = 1; + mtk_seninf_mux_update(mux, SENINF_MUX_CTRL_EXT, SENINF_PIX_SEL_EXT, pix_sel_ext); + mtk_seninf_mux_update(mux, SENINF_MUX_CTRL, SENINF_PIX_SEL, pix_sel); + + if (fmtinfo->flags & MTK_SENINF_FORMAT_JPEG) { + mtk_seninf_mux_update(mux, SENINF_MUX_CTRL, FIFO_FULL_WR_EN, 0); + mtk_seninf_mux_update(mux, SENINF_MUX_CTRL, FIFO_FLUSH_EN, + FIFO_FLUSH_EN_JPEG_2_PIXEL_MODE); + mtk_seninf_mux_update(mux, SENINF_MUX_CTRL, FIFO_PUSH_EN, + FIFO_PUSH_EN_JPEG_2_PIXEL_MODE); + } else { + mtk_seninf_mux_update(mux, SENINF_MUX_CTRL, FIFO_FULL_WR_EN, 2); + mtk_seninf_mux_update(mux, SENINF_MUX_CTRL, FIFO_FLUSH_EN, + FIFO_FLUSH_EN_NORMAL_MODE); + mtk_seninf_mux_update(mux, SENINF_MUX_CTRL, FIFO_PUSH_EN, + FIFO_PUSH_EN_NORMAL_MODE); + } + + mtk_seninf_mux_update(mux, SENINF_MUX_CTRL, SENINF_HSYNC_POL, hs_pol); + mtk_seninf_mux_update(mux, SENINF_MUX_CTRL, SENINF_VSYNC_POL, vs_pol); + + val = mtk_seninf_mux_read(mux, SENINF_MUX_CTRL); + rst_mask = SENINF_MUX_CTRL_SENINF_IRQ_SW_RST | SENINF_MUX_CTRL_SENINF_MUX_SW_RST; + + mtk_seninf_mux_write(mux, SENINF_MUX_CTRL, val | rst_mask); + mtk_seninf_mux_write(mux, SENINF_MUX_CTRL, val & ~rst_mask); + + /* HQ */ + mtk_seninf_mux_write(mux, SENINF_MUX_SPARE, 0xc2000); +} + +static void mtk_seninf_top_mux_setup(struct mtk_seninf *priv, + enum mtk_seninf_id seninf_id, + struct mtk_seninf_mux *mux) +{ + unsigned int val; + + /* + * Use the top mux (from SENINF input to MUX) to configure routing, and + * hardcode a 1:1 mapping from the MUX instances to the SENINF outputs. + */ + val = readl(priv->base + SENINF_TOP_MUX_CTRL) + & ~(0xf << (mux->mux_id * 4)); + val |= (seninf_id & 0xf) << (mux->mux_id * 4); + writel(val, priv->base + SENINF_TOP_MUX_CTRL); + + writel(0x76541010, priv->base + SENINF_TOP_CAM_MUX_CTRL); +} + +static void seninf_enable_test_pattern(struct mtk_seninf *priv, + struct v4l2_subdev_state *state) +{ + struct mtk_seninf_input *input = &priv->inputs[CSI_PORT_0]; + struct mtk_seninf_mux *mux = &priv->muxes[0]; + const struct mtk_seninf_format_info *fmtinfo; + const struct v4l2_mbus_framefmt *format; + unsigned int val; + unsigned int pix_sel_ext; + unsigned int pix_sel; + unsigned int hs_pol = 0; + unsigned int vs_pol = 0; + unsigned int seninf = 0; + unsigned int tm_size = 0; + unsigned int mux_id = mux->mux_id; + + format = v4l2_subdev_state_get_stream_format(state, priv->conf->nb_inputs, 0); + fmtinfo = mtk_seninf_format_info(format->code); + + mtk_seninf_update(priv, SENINF_TOP_CTRL, MUX_LP_MODE, 0); + + mtk_seninf_update(priv, SENINF_TOP_CTRL, SENINF_PCLK_EN, 1); + mtk_seninf_update(priv, SENINF_TOP_CTRL, SENINF2_PCLK_EN, 1); + + mtk_seninf_input_update(input, SENINF_CTRL, SENINF_EN, 1); + mtk_seninf_input_update(input, SENINF_CTRL, SENINF_SRC_SEL, 1); + mtk_seninf_input_update(input, SENINF_CTRL_EXT, + SENINF_TESTMDL_IP_EN, 1); + + mtk_seninf_input_update(input, SENINF_TG1_TM_CTL, TM_EN, 1); + mtk_seninf_input_update(input, SENINF_TG1_TM_CTL, TM_PAT, 0xc); + mtk_seninf_input_update(input, SENINF_TG1_TM_CTL, TM_VSYNC, 4); + mtk_seninf_input_update(input, SENINF_TG1_TM_CTL, TM_DUMMYPXL, 0x28); + + if (fmtinfo->flags & MTK_SENINF_FORMAT_BAYER) + mtk_seninf_input_update(input, SENINF_TG1_TM_CTL, TM_FMT, 0x0); + else + mtk_seninf_input_update(input, SENINF_TG1_TM_CTL, TM_FMT, 0x1); + + tm_size = FIELD_PREP(SENINF_TG1_TM_SIZE_TM_LINE, format->height + 8); + switch (format->code) { + case MEDIA_BUS_FMT_UYVY8_1X16: + case MEDIA_BUS_FMT_VYUY8_1X16: + case MEDIA_BUS_FMT_YUYV8_1X16: + case MEDIA_BUS_FMT_YVYU8_1X16: + tm_size |= FIELD_PREP(SENINF_TG1_TM_SIZE_TM_PXL, format->width * 2); + break; + default: + tm_size |= FIELD_PREP(SENINF_TG1_TM_SIZE_TM_PXL, format->width); + break; + } + writel(tm_size, input->base + SENINF_TG1_TM_SIZE); + + writel(TEST_MODEL_CLK_DIVIDED_CNT, input->base + SENINF_TG1_TM_CLK); + writel(TIME_STAMP_DIVIDER, input->base + SENINF_TG1_TM_STP); + + /* Set top mux */ + val = (readl(priv->base + SENINF_TOP_MUX_CTRL) & (~(0xf << (mux_id * 4)))) | + ((seninf & 0xf) << (mux_id * 4)); + writel(val, priv->base + SENINF_TOP_MUX_CTRL); + + mtk_seninf_mux_update(mux, SENINF_MUX_CTRL, SENINF_MUX_EN, 1); + mtk_seninf_mux_update(mux, SENINF_MUX_CTRL_EXT, + SENINF_SRC_SEL_EXT, SENINF_TEST_MODEL); + mtk_seninf_mux_update(mux, SENINF_MUX_CTRL, SENINF_SRC_SEL, 1); + + pix_sel_ext = 0; + pix_sel = 1; + + mtk_seninf_mux_update(mux, SENINF_MUX_CTRL_EXT, + SENINF_PIX_SEL_EXT, pix_sel_ext); + + mtk_seninf_mux_update(mux, SENINF_MUX_CTRL, SENINF_PIX_SEL, pix_sel); + + mtk_seninf_mux_update(mux, SENINF_MUX_CTRL, FIFO_PUSH_EN, 0x1f); + mtk_seninf_mux_update(mux, SENINF_MUX_CTRL, FIFO_FLUSH_EN, 0x1b); + mtk_seninf_mux_update(mux, SENINF_MUX_CTRL, FIFO_FULL_WR_EN, 2); + + mtk_seninf_mux_update(mux, SENINF_MUX_CTRL, SENINF_HSYNC_POL, hs_pol); + mtk_seninf_mux_update(mux, SENINF_MUX_CTRL, SENINF_VSYNC_POL, vs_pol); + mtk_seninf_mux_update(mux, SENINF_MUX_CTRL, SENINF_HSYNC_MASK, 1); + + mtk_seninf_mux_write(mux, SENINF_MUX_INTEN, + SENINF_IRQ_CLR_SEL | SENINF_ALL_ERR_IRQ_EN); + + mtk_seninf_mux_write(mux, SENINF_MUX_CTRL, + mtk_seninf_mux_read(mux, SENINF_MUX_CTRL) | + SENINF_MUX_CTRL_SENINF_IRQ_SW_RST | + SENINF_MUX_CTRL_SENINF_MUX_SW_RST); + udelay(1); + mtk_seninf_mux_write(mux, SENINF_MUX_CTRL, + mtk_seninf_mux_read(mux, SENINF_MUX_CTRL) & + ~(SENINF_MUX_CTRL_SENINF_IRQ_SW_RST | + SENINF_MUX_CTRL_SENINF_MUX_SW_RST)); + + //check this + writel(0x76540010, priv->base + SENINF_TOP_CAM_MUX_CTRL); + + dev_dbg(priv->dev, "%s: OK\n", __func__); +} + +static void mtk_seninf_start(struct mtk_seninf *priv, + struct v4l2_subdev_state *state, + struct mtk_seninf_input *input, + struct mtk_seninf_mux *mux) +{ + phy_power_on(input->phy); + + mtk_seninf_input_setup_csi2_rx(input); + mtk_seninf_input_setup_csi2(input, state); + + mtk_seninf_mux_setup(mux, input, state); + mtk_seninf_top_mux_setup(priv, input->seninf_id, mux); +} + +static void mtk_seninf_stop(struct mtk_seninf *priv, + struct mtk_seninf_input *input) +{ + unsigned int val; + + /* Disable CSI2(2.5G) first */ + val = readl(input->base + SENINF_CSI2_CTL); + val &= ~(SENINF_CSI2_CTL_CLOCK_LANE_EN | + SENINF_CSI2_CTL_DATA_LANE3_EN | + SENINF_CSI2_CTL_DATA_LANE2_EN | + SENINF_CSI2_CTL_DATA_LANE1_EN | + SENINF_CSI2_CTL_DATA_LANE0_EN); + writel(val, input->base + SENINF_CSI2_CTL); + + if (!priv->is_testmode) + phy_power_off(input->phy); +} + +/* ----------------------------------------------------------------------------- + * V4L2 Controls + */ + +static int seninf_set_ctrl(struct v4l2_ctrl *ctrl) +{ + struct mtk_seninf *priv = container_of(ctrl->handler, + struct mtk_seninf, ctrl_handler); + + switch (ctrl->id) { + case V4L2_CID_TEST_PATTERN: + priv->is_testmode = !!ctrl->val; + break; + } + + return 0; +} + +static const struct v4l2_ctrl_ops seninf_ctrl_ops = { + .s_ctrl = seninf_set_ctrl, +}; + +static const char *const seninf_test_pattern_menu[] = { + "No test pattern", + "Static horizontal color bars", +}; + +static int seninf_initialize_controls(struct mtk_seninf *priv) +{ + struct v4l2_ctrl_handler *handler; + int ret; + + handler = &priv->ctrl_handler; + ret = v4l2_ctrl_handler_init(handler, 2); + if (ret) + return ret; + + v4l2_ctrl_new_std_menu_items(handler, &seninf_ctrl_ops, + V4L2_CID_TEST_PATTERN, + ARRAY_SIZE(seninf_test_pattern_menu) - 1, + 0, 0, seninf_test_pattern_menu); + + priv->is_testmode = false; + + if (handler->error) { + ret = handler->error; + dev_err(priv->dev, + "Failed to init controls(%d)\n", ret); + v4l2_ctrl_handler_free(handler); + return ret; + } + + priv->subdev.ctrl_handler = handler; + + return 0; +} + +/* ----------------------------------------------------------------------------- + * V4L2 Subdev Operations + */ +static int seninf_s_stream(struct v4l2_subdev *sd, unsigned int source_pad, + int on) +{ + struct mtk_seninf *priv = sd_to_mtk_seninf(sd); + struct v4l2_subdev_state *state; + struct mtk_seninf_input *input; + struct mtk_seninf_mux *mux; + struct v4l2_subdev *source; + u32 sink_pad; + int ret; + + /* Stream control can only operate on source pads. */ + if (source_pad < priv->conf->nb_inputs || + source_pad >= priv->conf->nb_inputs + priv->conf->nb_outputs) + return -EINVAL; + + /* + * Locate the SENINF input and MUX for the source pad. + * + * Hardcode a 1:1 mapping of MUX instances to SENINF + * outputs to match the TOP_CAM_MUX configuration in + * mtk_seninf_top_mux_setup(). + */ + state = v4l2_subdev_lock_and_get_active_state(&priv->subdev); + if (!state) + return -EPIPE; + + ret = v4l2_subdev_routing_find_opposite_end(&state->routing, source_pad, 0, &sink_pad, + NULL); + if (ret) { + dev_dbg(priv->dev, "No sink pad routed to source pad %u\n", source_pad); + goto unlock; + } + + input = &priv->inputs[sink_pad]; + mux = &priv->muxes[source_pad - priv->conf->nb_inputs]; + + if (!on) { + if (!priv->is_testmode) { + source = input->source_sd; + ret = v4l2_subdev_call(source, video, s_stream, 0); + if (ret) + dev_err(priv->dev, + "failed to stop source %s: %d\n", + source->entity.name, ret); + } + + mtk_seninf_stop(priv, input); + pm_runtime_put(priv->dev); + goto unlock; + } + + ret = pm_runtime_get_sync(priv->dev); + if (ret < 0) { + dev_err(priv->dev, "Failed to pm_runtime_get_sync: %d\n", ret); + pm_runtime_put_noidle(priv->dev); + goto unlock; + } + + /* If test mode is enabled, just enable the test pattern generator. */ + if (priv->is_testmode) { + seninf_enable_test_pattern(priv, state); + ret = 0; + goto unlock; + } + + /* Start the SENINF first and then the source. */ + mtk_seninf_start(priv, state, input, mux); + + source = input->source_sd; + ret = v4l2_subdev_call(source, video, s_stream, 1); + if (ret) { + dev_err(priv->dev, "failed to start source %s: %d\n", + source->entity.name, ret); + mtk_seninf_stop(priv, input); + pm_runtime_put(priv->dev); + } + +unlock: + v4l2_subdev_unlock_state(state); + return ret; +}; + +static int seninf_enable_streams(struct v4l2_subdev *sd, + struct v4l2_subdev_state *state, u32 pad, + u64 streams_mask) +{ + return seninf_s_stream(sd, pad, 1); +} + +static int seninf_disable_streams(struct v4l2_subdev *sd, + struct v4l2_subdev_state *state, u32 pad, + u64 streams_mask) +{ + return seninf_s_stream(sd, pad, 0); +} + +static const struct v4l2_mbus_framefmt mtk_seninf_default_fmt = { + .code = SENINF_DEFAULT_BUS_FMT, + .width = SENINF_DEFAULT_WIDTH, + .height = SENINF_DEFAULT_HEIGHT, + .field = V4L2_FIELD_NONE, + .colorspace = V4L2_COLORSPACE_SRGB, + .xfer_func = V4L2_XFER_FUNC_DEFAULT, + .ycbcr_enc = V4L2_YCBCR_ENC_DEFAULT, + .quantization = V4L2_QUANTIZATION_DEFAULT, +}; + +static int __seninf_set_routing(struct v4l2_subdev *sd, + struct v4l2_subdev_state *state, + struct v4l2_subdev_krouting *routing) +{ + int ret; + + ret = v4l2_subdev_routing_validate(sd, routing, V4L2_SUBDEV_ROUTING_ONLY_1_TO_1); + if (ret) + return ret; + + ret = v4l2_subdev_set_routing_with_fmt(sd, state, routing, + &mtk_seninf_default_fmt); + + if (ret) + return ret; + + return 0; +} + +static int seninf_init_cfg(struct v4l2_subdev *sd, + struct v4l2_subdev_state *state) +{ + struct mtk_seninf *priv = sd_to_mtk_seninf(sd); + struct v4l2_subdev_route routes[SENINF_MAX_NUM_OUTPUTS] = { }; + struct v4l2_subdev_krouting routing = { + .routes = routes, + }; + unsigned int i; + + /* + * Initialize one route for supported source pads. + * It is a single route from the first sink pad to the source pad, + * while on SENINF 5.0 the routing table will map sink pads to source + * pads connected to CAMSV 1:1 (skipping the first two source pads + * connected to the CAM instances). + */ + routing.num_routes = priv->conf->nb_outputs; + + for (i = 0; i < routing.num_routes; i++) { + struct v4l2_subdev_route *route = &routes[i]; + + route->sink_pad = i; + route->sink_stream = 0; + route->source_pad = priv->conf->nb_inputs + i; + route->source_stream = 0; + route->flags = V4L2_SUBDEV_ROUTE_FL_ACTIVE; + } + + return __seninf_set_routing(sd, state, &routing); +} + +static int seninf_enum_mbus_code(struct v4l2_subdev *sd, + struct v4l2_subdev_state *state, + struct v4l2_subdev_mbus_code_enum *code) +{ + const struct mtk_seninf_format_info *fmtinfo; + struct mtk_seninf *priv = sd_to_mtk_seninf(sd); + + if (code->index >= ARRAY_SIZE(mtk_seninf_formats)) + return -EINVAL; + + fmtinfo = &mtk_seninf_formats[code->index]; + if (fmtinfo->flags & MTK_SENINF_FORMAT_INPUT_ONLY && + mtk_seninf_pad_is_source(priv, code->pad)) + return -EINVAL; + + code->code = fmtinfo->code; + + return 0; +} + +static int seninf_set_fmt(struct v4l2_subdev *sd, + struct v4l2_subdev_state *state, + struct v4l2_subdev_format *fmt) +{ + struct mtk_seninf *priv = sd_to_mtk_seninf(sd); + const struct mtk_seninf_format_info *fmtinfo; + struct v4l2_mbus_framefmt *format; + + /* + * TODO (?): We should disallow setting formats on the source pad + * completely, as the SENINF can't perform any processing. This would + * however break usage of the test pattern generator, as there would be + * no way to configure formats at all when no active input is selected. + */ + + /* + * Default to the first format if the requested media bus code isn't + * supported. + */ + fmtinfo = mtk_seninf_format_info(fmt->format.code); + if (!fmtinfo) { + fmtinfo = &mtk_seninf_formats[0]; + fmt->format.code = fmtinfo->code; + } + + /* Interlaced formats are not supported yet. */ + fmt->format.field = V4L2_FIELD_NONE; + + /* Store the format. */ + format = v4l2_subdev_state_get_stream_format(state, fmt->pad, fmt->stream); + if (!format) + return -EINVAL; + + *format = fmt->format; + + if (mtk_seninf_pad_is_source(priv, fmt->pad)) + return 0; + + /* Propagate the format to the corresponding source pad. */ + format = v4l2_subdev_state_get_opposite_stream_format(state, fmt->pad, + fmt->stream); + if (!format) + return -EINVAL; + + *format = fmt->format; + + return 0; +} + +static int seninf_set_routing(struct v4l2_subdev *sd, + struct v4l2_subdev_state *state, + enum v4l2_subdev_format_whence which, + struct v4l2_subdev_krouting *routing) +{ + return __seninf_set_routing(sd, state, routing); +} + +static const struct v4l2_subdev_core_ops seninf_subdev_core_ops = { + .subscribe_event = v4l2_ctrl_subdev_subscribe_event, + .unsubscribe_event = v4l2_event_subdev_unsubscribe, +}; + +static const struct v4l2_subdev_pad_ops seninf_subdev_pad_ops = { + .init_cfg = seninf_init_cfg, + .enum_mbus_code = seninf_enum_mbus_code, + .get_fmt = v4l2_subdev_get_fmt, + .set_fmt = seninf_set_fmt, + .link_validate = v4l2_subdev_link_validate_default, + .set_routing = seninf_set_routing, + .enable_streams = seninf_enable_streams, + .disable_streams = seninf_disable_streams, +}; + +static const struct v4l2_subdev_ops seninf_subdev_ops = { + .core = &seninf_subdev_core_ops, + .pad = &seninf_subdev_pad_ops, +}; + +/* ----------------------------------------------------------------------------- + * Media Entity Operations + */ + +static const struct media_entity_operations seninf_media_ops = { + .get_fwnode_pad = v4l2_subdev_get_fwnode_pad_1_to_1, + .link_validate = v4l2_subdev_link_validate, +}; + +/* ----------------------------------------------------------------------------- + * Async Subdev Notifier + */ + +struct mtk_seninf_async_subdev { + struct v4l2_async_subdev asd; + struct mtk_seninf_input *input; + unsigned int port; +}; + +static int mtk_seninf_fwnode_parse(struct device *dev, + unsigned int id) + +{ + static const char * const phy_names[] = { "csi0", "csi1", "csi2", "csi0b"}; + struct mtk_seninf *priv = dev_get_drvdata(dev); + struct mtk_seninf_async_subdev *s_asd; + struct fwnode_handle *ep, *fwnode; + struct mtk_seninf_input *input; + struct v4l2_async_subdev *asd; + struct v4l2_fwnode_endpoint vep = { + .bus_type = V4L2_MBUS_CSI2_DPHY, + }; + unsigned int port; + int ret; + + ep = fwnode_graph_get_endpoint_by_id(dev_fwnode(dev), id, 0, 0); + if (!ep) + return 0; + + fwnode = fwnode_graph_get_remote_endpoint(ep); + ret = v4l2_fwnode_endpoint_parse(ep, &vep); + if (ret) { + dev_err(dev, "Failed to parse %pOF\n", to_of_node(fwnode)); + ret = -EINVAL; + goto out; + } + + asd = v4l2_async_nf_add_fwnode(&priv->notifier, + fwnode, struct v4l2_async_subdev); + if (IS_ERR(asd)) { + ret = PTR_ERR(asd); + goto out; + } + s_asd = container_of(asd, struct mtk_seninf_async_subdev, asd); + + port = vep.base.port; + s_asd->port = port; + + if (mtk_seninf_pad_is_source(priv, port)) { + ret = 0; + goto out; + } + + if (vep.bus_type != V4L2_MBUS_CSI2_DPHY) { + dev_err(dev, "Only CSI2 bus type is currently supported\n"); + ret = -EINVAL; + goto out; + } + + input = &priv->inputs[port]; + + input->pad = port; + input->seninf_id = port_to_seninf_id[port]; + input->base = priv->base + 0x1000 * input->seninf_id; + input->seninf = priv; + + input->bus = vep.bus.mipi_csi2; + + input->phy = devm_phy_get(dev, phy_names[port]); + if (IS_ERR(input->phy)) { + dev_err(dev, "failed to get phy:%ld\n", PTR_ERR(input->phy)); + ret = PTR_ERR(input->phy); + goto out; + } + input->phy_mode = SENINF_PHY_MODE_4D1C; + + s_asd->input = input; + + ret = 0; +out: + fwnode_handle_put(ep); + fwnode_handle_put(fwnode); + return ret; +} + +static int mtk_seninf_notifier_bound(struct v4l2_async_notifier *notifier, + struct v4l2_subdev *sd, + struct v4l2_async_subdev *asd) +{ + struct mtk_seninf *priv = container_of(notifier, struct mtk_seninf, notifier); + struct mtk_seninf_async_subdev *s_asd = + container_of(asd, struct mtk_seninf_async_subdev, asd); + struct device_link *link; + int ret; + + dev_dbg(priv->dev, "%s bound to SENINF port %u\n", sd->entity.name, s_asd->port); + + if (mtk_seninf_pad_is_sink(priv, s_asd->port)) { + struct mtk_seninf_input *input = s_asd->input; + + input->source_sd = sd; + + link = device_link_add(priv->dev, sd->dev, + DL_FLAG_PM_RUNTIME | DL_FLAG_STATELESS); + if (!link) { + dev_err(priv->dev, + "Failed to create device link from source %s\n", sd->name); + return -EINVAL; + } + + ret = v4l2_create_fwnode_links_to_pad(sd, &priv->pads[input->pad], + MEDIA_LNK_FL_IMMUTABLE | + MEDIA_LNK_FL_ENABLED); + } else { + link = device_link_add(sd->dev, priv->dev, + DL_FLAG_PM_RUNTIME | DL_FLAG_STATELESS); + if (!link) { + dev_err(priv->dev, + "Failed to create device link to output %s\n", sd->name); + return -EINVAL; + } + + ret = v4l2_create_fwnode_links_to_pad(&priv->subdev, + &sd->entity.pads[0], + MEDIA_LNK_FL_IMMUTABLE | + MEDIA_LNK_FL_ENABLED); + } + if (ret) { + dev_err(priv->dev, "Failed to create links between SENINF port %u and %s (%d)\n", + s_asd->port, sd->entity.name, ret); + return ret; + } + + return 0; +} + +static int mtk_seninf_notifier_complete(struct v4l2_async_notifier *notifier) +{ + struct mtk_seninf *priv = container_of(notifier, struct mtk_seninf, notifier); + int ret; + + ret = v4l2_device_register_subdev_nodes(&priv->v4l2_dev); + if (ret) { + dev_err(priv->dev, "Failed to register subdev nodes: %d\n", ret); + return ret; + } + + return 0; +} + +static const struct v4l2_async_notifier_operations mtk_seninf_async_ops = { + .bound = mtk_seninf_notifier_bound, + .complete = mtk_seninf_notifier_complete, +}; + +static int mtk_seninf_media_init(struct mtk_seninf *priv) +{ + struct media_device *media_dev = &priv->media_dev; + const struct mtk_seninf_conf *conf = priv->conf; + u8 num_pads = conf->nb_outputs + conf->nb_inputs; + struct media_pad *pads = priv->pads; + struct device *dev = priv->dev; + unsigned int i; + int ret; + + media_dev->dev = dev; + strscpy(media_dev->model, conf->model, sizeof(media_dev->model)); + snprintf(media_dev->bus_info, sizeof(media_dev->bus_info), + "platform:%s", dev_name(dev)); + media_dev->hw_revision = 0; + media_device_init(media_dev); + + ret = media_entity_pads_init(&priv->subdev.entity, num_pads, pads); + if (ret) + goto err_clean_media; + + for (i = 0; i < conf->nb_inputs; i++) + pads[i].flags = MEDIA_PAD_FL_SINK; + for (i = conf->nb_inputs; i < num_pads; i++) + pads[i].flags = MEDIA_PAD_FL_SOURCE; + + return 0; +err_clean_media: + media_device_cleanup(media_dev); + + return ret; +} + +static int mtk_seninf_v4l2_async_register(struct mtk_seninf *priv) +{ + const struct mtk_seninf_conf *conf = priv->conf; + struct device *dev = priv->dev; + unsigned int i; + int ret; + + v4l2_async_nf_init(&priv->notifier); + + for (i = 0; i < conf->nb_inputs + conf->nb_outputs; ++i) { + ret = mtk_seninf_fwnode_parse(dev, i); + + if (ret) { + dev_err(dev, "Failed to parse endpoint at port %d, err: %d\n", i, ret); + goto err_clean_notififer; + } + } + + priv->notifier.ops = &mtk_seninf_async_ops; + ret = v4l2_async_nf_register(&priv->v4l2_dev, &priv->notifier); + if (ret) { + dev_err(dev, "Failed to register async notifier: %d\n", ret); + goto err_clean_notififer; + } + return 0; + +err_clean_notififer: + v4l2_async_nf_cleanup(&priv->notifier); + + return ret; +} + +static int mtk_seninf_v4l2_register(struct mtk_seninf *priv) +{ + struct v4l2_subdev *sd = &priv->subdev; + struct device *dev = priv->dev; + int ret; + + /* Initialize media device & pads. */ + ret = mtk_seninf_media_init(priv); + if (ret) + return ret; + + /* Initialize & register v4l2 device. */ + priv->v4l2_dev.mdev = &priv->media_dev; + + ret = v4l2_device_register(dev, &priv->v4l2_dev); + if (ret) { + dev_err_probe(dev, ret, "Failed to register V4L2 device: %d\n", ret); + goto err_clean_media; + } + + /* Initialize & register subdev. */ + v4l2_subdev_init(sd, &seninf_subdev_ops); + sd->dev = dev; + sd->entity.function = MEDIA_ENT_F_VID_IF_BRIDGE; + sd->entity.ops = &seninf_media_ops; + sd->flags |= V4L2_SUBDEV_FL_HAS_DEVNODE | V4L2_SUBDEV_FL_HAS_EVENTS + | V4L2_SUBDEV_FL_STREAMS; + strscpy(sd->name, dev_name(dev), V4L2_SUBDEV_NAME_SIZE); + ret = seninf_initialize_controls(priv); + if (ret) { + dev_err_probe(dev, ret, "Failed to initialize controls: %d\n", ret); + goto err_unreg_v4l2; + } + v4l2_set_subdevdata(sd, priv); + + ret = v4l2_subdev_init_finalize(sd); + if (ret) + goto err_free_handler; + + ret = v4l2_device_register_subdev(&priv->v4l2_dev, sd); + if (ret) { + dev_err_probe(dev, ret, "Failed to register subdev: %d\n", ret); + goto err_cleanup_subdev; + } + + /* Set up async device */ + ret = mtk_seninf_v4l2_async_register(priv); + if (ret) { + dev_err_probe(dev, ret, "Failed to register v4l2 async notifier: %d\n", ret); + goto err_unreg_subdev; + } + + /* Register media device */ + ret = media_device_register(&priv->media_dev); + if (ret) { + dev_err_probe(dev, ret, "failed to register media device: %d\n", ret); + goto err_unreg_notifier; + } + + return 0; + +err_unreg_notifier: + v4l2_async_nf_unregister(&priv->notifier); +err_unreg_subdev: + v4l2_device_unregister_subdev(sd); +err_cleanup_subdev: + v4l2_subdev_cleanup(sd); +err_free_handler: + v4l2_ctrl_handler_free(&priv->ctrl_handler); +err_unreg_v4l2: + v4l2_device_unregister(&priv->v4l2_dev); +err_clean_media: + media_entity_cleanup(&sd->entity); + media_device_cleanup(&priv->media_dev); + + return ret; +} + +static int seninf_probe(struct platform_device *pdev) +{ + /* List of clocks required by seninf. */ + static const char * const clk_names[] = { "camsys", "top_mux" }; + struct device *dev = &pdev->dev; + struct mtk_seninf *priv; + unsigned int i; + int ret; + + priv = devm_kzalloc(dev, sizeof(struct mtk_seninf), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + priv->conf = of_device_get_match_data(dev); + + dev_set_drvdata(dev, priv); + priv->dev = dev; + + priv->base = devm_platform_ioremap_resource(pdev, 0); + if (IS_ERR(priv->base)) + return PTR_ERR(priv->base); + + priv->num_clks = ARRAY_SIZE(clk_names); + priv->clks = devm_kcalloc(dev, priv->num_clks, + sizeof(*priv->clks), GFP_KERNEL); + if (!priv->clks) + return -ENOMEM; + + for (i = 0; i < priv->num_clks; ++i) + priv->clks[i].id = clk_names[i]; + + ret = devm_clk_bulk_get(dev, priv->num_clks, priv->clks); + if (ret) + return dev_err_probe(dev, ret, "failed to get seninf clock:%d\n", ret); + + for (i = 0; i < priv->conf->nb_muxes; ++i) { + struct mtk_seninf_mux *mux = &priv->muxes[i]; + + mux->pad = priv->conf->nb_inputs + i; + mux->mux_id = i; + mux->base = priv->base + 0x1000 * i; + mux->seninf = priv; + } + + ret = mtk_seninf_v4l2_register(priv); + if (ret) + return ret; + + devm_pm_runtime_enable(dev); + + return ret; +} + +static int seninf_pm_suspend(struct device *dev) +{ + struct mtk_seninf *priv = dev_get_drvdata(dev); + + dev_dbg(dev, "seninf runtime suspend\n"); + clk_bulk_disable_unprepare(priv->num_clks, priv->clks); + + return 0; +} + +static int seninf_pm_resume(struct device *dev) +{ + struct mtk_seninf *priv = dev_get_drvdata(dev); + int ret; + + dev_dbg(dev, "seninf runtime resume\n"); + ret = clk_bulk_prepare_enable(priv->num_clks, priv->clks); + if (ret) { + dev_err(dev, "failed to enable clock:%d\n", ret); + return ret; + } + + mtk_seninf_csi2_setup_phy(priv); + + return 0; +} + +static const struct dev_pm_ops runtime_pm_ops = { + SET_RUNTIME_PM_OPS(seninf_pm_suspend, seninf_pm_resume, NULL) + SET_SYSTEM_SLEEP_PM_OPS(pm_runtime_force_suspend, pm_runtime_force_resume) +}; + +static int seninf_remove(struct platform_device *pdev) +{ + struct mtk_seninf *priv = dev_get_drvdata(&pdev->dev); + + media_device_unregister(&priv->media_dev); + media_device_cleanup(&priv->media_dev); + v4l2_async_nf_unregister(&priv->notifier); + v4l2_async_nf_cleanup(&priv->notifier); + v4l2_device_unregister_subdev(&priv->subdev); + v4l2_subdev_cleanup(&priv->subdev); + v4l2_ctrl_handler_free(&priv->ctrl_handler); + media_entity_cleanup(&priv->subdev.entity); + v4l2_device_unregister(&priv->v4l2_dev); + + return 0; +} + +static const struct mtk_seninf_conf seninf_8365_conf = { + .model = "mtk-camsys-3.0", + .nb_inputs = 4, + .nb_muxes = 6, + .nb_outputs = 4, +}; + +static const struct of_device_id mtk_seninf_of_match[] = { + { .compatible = "mediatek,mt8365-seninf", .data = &seninf_8365_conf }, + { /* sentinel */ }, +}; +MODULE_DEVICE_TABLE(of, mtk_seninf_of_match); + +static struct platform_driver seninf_pdrv = { + .driver = { + .name = "mtk-seninf", + .pm = &runtime_pm_ops, + .of_match_table = mtk_seninf_of_match, + }, + .probe = seninf_probe, + .remove = seninf_remove, +}; + +module_platform_driver(seninf_pdrv); + +MODULE_DESCRIPTION("MTK sensor interface driver"); +MODULE_AUTHOR("Louis Kuo "); +MODULE_LICENSE("GPL"); diff --git a/drivers/media/platform/mediatek/isp/isp_30/seninf/mtk_seninf_reg.h b/drivers/media/platform/mediatek/isp/isp_30/seninf/mtk_seninf_reg.h new file mode 100644 index 000000000000..768ad5d641be --- /dev/null +++ b/drivers/media/platform/mediatek/isp/isp_30/seninf/mtk_seninf_reg.h @@ -0,0 +1,112 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Copyright (c) 2022 MediaTek Inc. + */ + +#ifndef __SENINF_REG_H__ +#define __SENINF_REG_H__ + +#include + +#define SENINF_TOP_CTRL 0x0000 +#define SENINF_TOP_CTRL_MUX_LP_MODE BIT(31) +#define SENINF_TOP_CTRL_SENINF_PCLK_EN BIT(10) +#define SENINF_TOP_CTRL_SENINF2_PCLK_EN BIT(11) +#define SENINF_TOP_MUX_CTRL 0x0008 +#define SENINF_TOP_CAM_MUX_CTRL 0x0010 +#define SENINF_TOP_PHY_SENINF_CTL_CSI0 0x001c +#define SENINF_TOP_PHY_SENINF_CTL_CSI0_DPHY_MODE BIT(0) +#define SENINF_TOP_PHY_SENINF_CTL_CSI0_CK_SEL_1 GENMASK(10, 8) +#define SENINF_TOP_PHY_SENINF_CTL_CSI0_CK_SEL_2 GENMASK(13, 12) +#define SENINF_TOP_PHY_SENINF_CTL_CSI0_PHY_SENINF_LANE_MUX_CSI0_EN BIT(31) +#define SENINF_TOP_PHY_SENINF_CTL_CSI1 0x0020 +#define SENINF_TOP_PHY_SENINF_CTL_CSI1_DPHY_MODE BIT(0) +#define SENINF_TOP_PHY_SENINF_CTL_CSI1_CK_SEL_1 GENMASK(10, 8) +#define SENINF_TOP_PHY_SENINF_CTL_CSI1_PHY_SENINF_LANE_MUX_CSI1_EN BIT(31) +#define SENINF_CTRL 0x0200 +#define SENINF_CTRL_SENINF_EN BIT(0) +#define SENINF_CTRL_CSI2_SW_RST BIT(7) +#define SENINF_CTRL_SENINF_SRC_SEL GENMASK(14, 12) +#define SENINF_CTRL_PAD2CAM_DATA_SEL GENMASK(30, 28) +#define SENINF_CTRL_EXT 0x0204 +#define SENINF_CTRL_EXT_SENINF_TESTMDL_IP_EN BIT(1) +#define SENINF_CTRL_EXT_SENINF_NCSI2_IP_EN BIT(5) +#define SENINF_CTRL_EXT_SENINF_CSI2_IP_EN BIT(6) +#define SENINF_TG1_PH_CNT 0x0600 +#define SENINF_TG1_SEN_CK 0x0604 +#define SENINF_TG1_TM_CTL 0x0608 +#define SENINF_TG1_TM_CTL_TM_EN BIT(0) +#define SENINF_TG1_TM_CTL_TM_FMT BIT(2) +#define SENINF_TG1_TM_CTL_TM_PAT GENMASK(7, 4) +#define SENINF_TG1_TM_CTL_TM_VSYNC GENMASK(15, 8) +#define SENINF_TG1_TM_CTL_TM_DUMMYPXL GENMASK(23, 16) +#define SENINF_TG1_TM_SIZE 0x060c +#define SENINF_TG1_TM_SIZE_TM_LINE GENMASK(29, 16) +#define SENINF_TG1_TM_SIZE_TM_PXL GENMASK(12, 0) +#define SENINF_TG1_TM_CLK 0x0610 +#define TEST_MODEL_CLK_DIVIDED_CNT 8 +#define SENINF_TG1_TM_STP 0x0614 +#define TIME_STAMP_DIVIDER 1 +#define MIPI_RX_CON24_CSI0 0x0824 +#define MIPI_RX_CON24_CSI0_CSI0_BIST_LN0_MUX GENMASK(25, 24) +#define MIPI_RX_CON24_CSI0_CSI0_BIST_LN1_MUX GENMASK(27, 26) +#define MIPI_RX_CON24_CSI0_CSI0_BIST_LN2_MUX GENMASK(29, 28) +#define MIPI_RX_CON24_CSI0_CSI0_BIST_LN3_MUX GENMASK(31, 30) +#define SENINF_CSI2_CTL 0x0a00 +#define SENINF_CSI2_CTL_DATA_LANE0_EN BIT(0) +#define SENINF_CSI2_CTL_DATA_LANE1_EN BIT(1) +#define SENINF_CSI2_CTL_DATA_LANE2_EN BIT(2) +#define SENINF_CSI2_CTL_DATA_LANE3_EN BIT(3) +#define SENINF_CSI2_CTL_CLOCK_LANE_EN BIT(4) +#define SENINF_CSI2_CTL_HSRX_DET_EN BIT(7) +#define SENINF_CSI2_CTL_ED_SEL BIT(16) +#define DATA_HEADER_ORDER_DI_WCL_WCH 1 +#define SENINF_CSI2_CTL_HS_TRAIL_EN BIT(25) +#define SENINF_CSI2_CTL_CLOCK_HS_OPTION BIT(27) +#define SENINF_CSI2_LNRD_TIMING 0x0a08 +#define SENINF_CSI2_LNRD_TIMING_DATA_SETTLE_PARAMETER GENMASK(15, 8) +#define SENINF_CSI2_DPCM 0x0a0c +#define SENINF_CSI2_DPCM_DI_30_DPCM_EN BIT(7) +#define SENINF_CSI2_DPCM_DI_2A_DPCM_EN BIT(15) +#define SENINF_CSI2_INT_EN 0x0a10 +#define SENINF_CSI2_INT_STATUS 0x0a14 +#define SENINF_CSI2_DGB_SEL 0x0a18 +#define SENINF_CSI2_DGB_SEL_DEBUG_SEL GENMASK(7, 0) +#define SENINF_CSI2_DGB_SEL_DEBUG_EN BIT(31) +#define SENINF_CSI2_SPARE0 0x0a20 +#define SENINF_CSI2_LNRC_FSM 0x0a28 +#define SENINF_CSI2_HS_TRAIL 0x0a40 +#define SENINF_CSI2_HS_TRAIL_HS_TRAIL_PARAMETER GENMASK(7, 0) +#define SENINF_CSI2_RESYNC_MERGE_CTL 0x0a74 +#define SENINF_CSI2_RESYNC_MERGE_CTL_CPHY_LANE_RESYNC_CNT GENMASK(2, 0) +#define SENINF_CSI2_RESYNC_MERGE_CTL_BYPASS_LANE_RESYNC BIT(10) +#define SENINF_CSI2_RESYNC_MERGE_CTL_CDPHY_SEL BIT(11) +#define SENINF_CSI2_MODE 0x0ae8 +#define SENINF_CSI2_MODE_CSR_CSI2_MODE GENMASK(7, 0) +#define SENINF_CSI2_MODE_CSR_CSI2_HEADER_LEN GENMASK(10, 8) +#define SENINF_CSI2_DPHY_SYNC 0x0b20 +#define SENINF_CSI2_DPHY_SYNC_SYNC_SEQ_MASK_0 GENMASK(15, 0) +#define SENINF_CSI2_DPHY_SYNC_SYNC_SEQ_PAT_0 GENMASK(31, 16) +#define SENINF_MUX_CTRL 0x0d00 +#define SENINF_MUX_CTRL_SENINF_MUX_SW_RST BIT(0) +#define SENINF_MUX_CTRL_SENINF_IRQ_SW_RST BIT(1) +#define SENINF_MUX_CTRL_SENINF_HSYNC_MASK BIT(7) +#define SENINF_MUX_CTRL_SENINF_PIX_SEL BIT(8) +#define SENINF_MUX_CTRL_SENINF_VSYNC_POL BIT(9) +#define SENINF_MUX_CTRL_SENINF_HSYNC_POL BIT(10) +#define SENINF_MUX_CTRL_SENINF_SRC_SEL GENMASK(15, 12) +#define SENINF_MUX_CTRL_FIFO_PUSH_EN GENMASK(21, 16) +#define FIFO_PUSH_EN_NORMAL_MODE 0x1f +#define FIFO_PUSH_EN_JPEG_2_PIXEL_MODE 0x1e +#define SENINF_MUX_CTRL_FIFO_FLUSH_EN GENMASK(28, 22) +#define FIFO_FLUSH_EN_NORMAL_MODE 0x1b +#define FIFO_FLUSH_EN_JPEG_2_PIXEL_MODE 0x18 +#define SENINF_MUX_CTRL_FIFO_FULL_WR_EN GENMASK(29, 28) +#define SENINF_MUX_CTRL_SENINF_MUX_EN BIT(31) +#define SENINF_MUX_INTEN 0x0d04 +#define SENINF_MUX_SPARE 0x0d2c +#define SENINF_MUX_CTRL_EXT 0x0d3c +#define SENINF_MUX_CTRL_EXT_SENINF_SRC_SEL_EXT GENMASK(1, 0) +#define SENINF_MUX_CTRL_EXT_SENINF_PIX_SEL_EXT BIT(4) + +#endif /* __SENINF_REG_H__ */ From patchwork Mon Aug 7 09:48:12 2023 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Julien Stephan X-Patchwork-Id: 13343237 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id D66E6C001B0 for ; Mon, 7 Aug 2023 09:50:49 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S230062AbjHGJut (ORCPT ); Mon, 7 Aug 2023 05:50:49 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:37828 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S230232AbjHGJup (ORCPT ); Mon, 7 Aug 2023 05:50:45 -0400 Received: from mail-wr1-x431.google.com (mail-wr1-x431.google.com [IPv6:2a00:1450:4864:20::431]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 9493419A2 for ; Mon, 7 Aug 2023 02:50:31 -0700 (PDT) Received: by mail-wr1-x431.google.com with SMTP id ffacd0b85a97d-31768ce2e81so3770299f8f.1 for ; Mon, 07 Aug 2023 02:50:31 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=baylibre-com.20221208.gappssmtp.com; s=20221208; t=1691401827; x=1692006627; h=content-transfer-encoding:mime-version:references:in-reply-to :message-id:date:subject:cc:to:from:from:to:cc:subject:date :message-id:reply-to; bh=MBy/fPgo/hYXurWD6RnpLpdL4CrExU7MOBsmQrPWcBg=; b=dMTR42xfYtTt+sU0bumJxNZoyRyqDkQa9ifPRJ5EzIQPG7W4bYCJN4Yh5uzrmz1aT3 hZX8lflQBTaCySJXplN6vG49E7bK6oueOKPM3NByNq/BMWe6cBOcu9Rr1DYWEXmzdb+B YeVDxGI2zbaX1m5sTlt3r8AVDPr6PipISUJtMPsk92VZiaXp9qhAhVxRX6f188Tbn4Ao d/YUFLhr88HaNZc+mv3Vgt2URfu1YbG2NNX2FgqnbFQ28B4hRN6e3QfXoeSFveU7ENk1 8Pl6ka8YuY+LbPNjiHAtaMbMjdReKz1UtGel2ij9cMpA4UwRkUTF+RNbKKr/NzqR/27r iS3g== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20221208; t=1691401827; x=1692006627; h=content-transfer-encoding:mime-version:references:in-reply-to :message-id:date:subject:cc:to:from:x-gm-message-state:from:to:cc :subject:date:message-id:reply-to; bh=MBy/fPgo/hYXurWD6RnpLpdL4CrExU7MOBsmQrPWcBg=; b=UBjKJI97hR6xW2Tm+35EsK/TvTTAPiedkH88zMNTUi9Fk63agw3eyxv1V41Zhyayo7 Yc6gKOxDJskCZ/jGt4bbwetZEx+TNllu9SFNEK6EYhIm9swNoW0Gwi+QSqekG5dZ6/2E jkULOyzY1ECxGzW+8v9HLX6uCEq7uB6HMP9njIMSMdlOny6EpbpLspfBfSW6Jrs5fd4C XAmGEBD8nsy++of92FqN+PV9nuD5YHPDEqnAE8IMMnT2P6GQbd2VqHyiUJ9YoxMnV80H 0EhjZDQj50rmXgg6IPAs6kfab2Q3EQKBHj1NSGnEzRdZCFMNsSXJPCxqnodlHwzI2vFg Ja0Q== X-Gm-Message-State: AOJu0YyraHNjIQtMWvvFDmHUNCTX4apDfJUqoYssmJa7sJYZJWdRfhCT Povgt10CQpQ5ztqFfBuXN8MFtw== X-Google-Smtp-Source: AGHT+IHEb1gwsP/mnI/AlQiOHgdrgLDb8eFf3CjDco0QSR1f6VCNeu6WWmn4kc1FX6you796r1Vvlg== X-Received: by 2002:a5d:5101:0:b0:317:6129:a972 with SMTP id s1-20020a5d5101000000b003176129a972mr6419596wrt.37.1691401827316; Mon, 07 Aug 2023 02:50:27 -0700 (PDT) Received: from localhost.localdomain ([2a01:e0a:55f:21e0:9e19:4376:dea6:dbfa]) by smtp.gmail.com with ESMTPSA id i11-20020a05600c2d8b00b003fe5228b78dsm2752429wmg.1.2023.08.07.02.50.26 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Mon, 07 Aug 2023 02:50:27 -0700 (PDT) From: Julien Stephan Cc: Phi-bang Nguyen , Julien Stephan , Andy Hsieh , AngeloGioacchino Del Regno , Conor Dooley , daoyuan huang , devicetree@vger.kernel.org, Florian Sylvestre , Hans Verkuil , Krzysztof Kozlowski , Laurent Pinchart , linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, linux-mediatek@lists.infradead.org, linux-media@vger.kernel.org, Louis Kuo , Matthias Brugger , Mauro Carvalho Chehab , Moudy Ho , Rob Herring Subject: [PATCH v3 3/4] dt-bindings: media: add mediatek ISP3.0 camsv Date: Mon, 7 Aug 2023 11:48:12 +0200 Message-ID: <20230807094940.329165-4-jstephan@baylibre.com> X-Mailer: git-send-email 2.41.0 In-Reply-To: <20230807094940.329165-1-jstephan@baylibre.com> References: <20230807094940.329165-1-jstephan@baylibre.com> MIME-Version: 1.0 To: unlisted-recipients:; (no To-header on input) Precedence: bulk List-ID: X-Mailing-List: linux-media@vger.kernel.org From: Phi-bang Nguyen This adds the bindings, for the ISP3.0 camsv module embedded in some Mediatek SoC, such as the mt8365 Signed-off-by: Phi-bang Nguyen Signed-off-by: Julien Stephan --- .../bindings/media/mediatek,mt8365-camsv.yaml | 109 ++++++++++++++++++ MAINTAINERS | 1 + 2 files changed, 110 insertions(+) create mode 100644 Documentation/devicetree/bindings/media/mediatek,mt8365-camsv.yaml diff --git a/Documentation/devicetree/bindings/media/mediatek,mt8365-camsv.yaml b/Documentation/devicetree/bindings/media/mediatek,mt8365-camsv.yaml new file mode 100644 index 000000000000..097b1ab6bc72 --- /dev/null +++ b/Documentation/devicetree/bindings/media/mediatek,mt8365-camsv.yaml @@ -0,0 +1,109 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +# Copyright (c) 2023 MediaTek, BayLibre +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/mediatek,mt8365-camsv.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MediaTek CAMSV 3.0 + +maintainers: + - Laurent Pinchart + - Julien Stephan + - Andy Hsieh + +description: + The CAMSV is a set of DMA engines connected to the SENINF CSI-2 + receivers. The number of CAMSVs depend on the SoC model. + +properties: + compatible: + const: mediatek,mt8365-camsv + + reg: + items: + - description: camsv base + - description: img0 base + - description: tg base + + interrupts: + maxItems: 1 + + power-domains: + maxItems: 1 + + clocks: + items: + - description: cam clock + - description: camtg clock + - description: camsv clock + + clock-names: + items: + - const: cam + - const: camtg + - const: camsv + + iommus: + maxItems: 1 + + ports: + $ref: /schemas/graph.yaml#/properties/ports + + properties: + port@0: + $ref: /schemas/graph.yaml#/properties/port + description: connection point for camsv0 + + required: + - port@0 + +required: + - compatible + - interrupts + - clocks + - clock-names + - power-domains + - iommus + - ports + +additionalProperties: false + +examples: + - | + #include + #include + #include + #include + #include + + soc { + #address-cells = <2>; + #size-cells = <2>; + + camsv1: camsv@15050000 { + compatible = "mediatek,mt8365-camsv"; + reg = <0 0x15050000 0 0x0040>, + <0 0x15050208 0 0x0020>, + <0 0x15050400 0 0x0100>; + interrupts = ; + clocks = <&camsys CLK_CAM>, + <&camsys CLK_CAMTG>, + <&camsys CLK_CAMSV0>; + clock-names = "cam", "camtg", "camsv"; + iommus = <&iommu M4U_PORT_CAM_IMGO>; + power-domains = <&spm MT8365_POWER_DOMAIN_CAM>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + port@0 { + reg = <0>; + camsv1_endpoint: endpoint { + remote-endpoint = <&seninf_camsv1_endpoint>; + }; + }; + }; + }; + }; +... diff --git a/MAINTAINERS b/MAINTAINERS index c5a97f692422..fd192d3799b5 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -13364,6 +13364,7 @@ M: Laurent Pinchart M: Julien Stephan M: Andy Hsieh S: Supported +F: Documentation/devicetree/bindings/media/mediatek,mt8365-camsv.yaml F: Documentation/devicetree/bindings/media/mediatek,mt8365-seninf.yaml F: drivers/media/platform/mediatek/isp/isp_30/seninf/* From patchwork Mon Aug 7 09:48:13 2023 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Julien Stephan X-Patchwork-Id: 13343238 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id 2836FC41513 for ; Mon, 7 Aug 2023 09:51:47 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S231405AbjHGJvq (ORCPT ); Mon, 7 Aug 2023 05:51:46 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:38666 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S231341AbjHGJvn (ORCPT ); Mon, 7 Aug 2023 05:51:43 -0400 Received: from mail-wm1-x32b.google.com (mail-wm1-x32b.google.com [IPv6:2a00:1450:4864:20::32b]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 8CC2519A9 for ; Mon, 7 Aug 2023 02:51:17 -0700 (PDT) Received: by mail-wm1-x32b.google.com with SMTP id 5b1f17b1804b1-3fbd33a57b6so42793215e9.2 for ; Mon, 07 Aug 2023 02:51:17 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=baylibre-com.20221208.gappssmtp.com; s=20221208; t=1691401873; x=1692006673; h=content-transfer-encoding:mime-version:references:in-reply-to :message-id:date:subject:cc:to:from:from:to:cc:subject:date :message-id:reply-to; bh=R+rDcbsu17ty6qtUFxa7zH2Z3kpKEhbgiNWpxFudl4A=; b=X69ZIvZNbPIJLd2srDq9MisWf67BmTcneWjCOA5wNefa4LUFhjS9GMpq9DJfDkOMh6 U9XRK6Vxk14GKHL3bFfvisiX8ILx3r42XjgR0XvDz7dLPAJ1fDq85FmptUAd98ZBThdz QHxavdD+GeJ87Ej+fNvRdaMLWynILjAa3dseciypjWTWaOduIxyoxUTza+tPd/zzxHXn OWGHynaBJTjdI2C2iIhZlK0J1drcOhQtXyn/oUzdBjcsPqqOFON0arMvRwTwODAcM6rF 35jAiDUY2vem2+gGB+Kt5s9dNfct87SG+EAhvF0HAHvbCWH/V61Yupq8m6weofNgJkCC njfA== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20221208; t=1691401873; x=1692006673; h=content-transfer-encoding:mime-version:references:in-reply-to :message-id:date:subject:cc:to:from:x-gm-message-state:from:to:cc :subject:date:message-id:reply-to; bh=R+rDcbsu17ty6qtUFxa7zH2Z3kpKEhbgiNWpxFudl4A=; b=HF6D5hfaPw8N7aBWW6crTVmM1UOSmtp2QNUXUCt9w8bjHfWkR/BCKKeNRMJBwKBHhY NkVRvAtu2XR0QwcB0HdUYHOSKf9l6h1vOvMBGT+0mf7STu0EEzCbUFXVzIYw5eGgBRxf DYHybPLcWGvJ7ThfLmEEvbXavFAgVoM5wevuXKCSXUEzbiVTF+iGc/UxM0+8ERApwbsC R1nEhUEw/j74rOJKtav3jOGXUs3jpj0/vBH0CjXOPliug/K7iaLkiREqmAzsS1V/42xn QTZQjbyfwVO4+zY2O0g6hlY/KHbkJQbdtDZnH3KceCdoGO/ncoi4hOOMEJZEhEfM6+4E Zryg== X-Gm-Message-State: AOJu0YzYnAX6TH6sG7p4fsIBhXKND9MGDbXrHRilpEMX8oNgfIU1ci2q DgsD5I/AUbdyf7oI/t40n115zg== X-Google-Smtp-Source: AGHT+IF2SwYPrsgXNzgeH0mTFI8pblULXSu+AHQQ3Gsh0Izus0XMR2PG1ghfW4GmOPvi9kCuwfwvxg== X-Received: by 2002:a05:600c:2811:b0:3fe:16d3:7d60 with SMTP id m17-20020a05600c281100b003fe16d37d60mr7342869wmb.9.1691401872672; Mon, 07 Aug 2023 02:51:12 -0700 (PDT) Received: from localhost.localdomain ([2a01:e0a:55f:21e0:9e19:4376:dea6:dbfa]) by smtp.gmail.com with ESMTPSA id i11-20020a05600c2d8b00b003fe5228b78dsm2752429wmg.1.2023.08.07.02.51.11 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Mon, 07 Aug 2023 02:51:12 -0700 (PDT) From: Julien Stephan Cc: Phi-bang Nguyen , Florian Sylvestre , Laurent Pinchart , Julien Stephan , Andy Hsieh , AngeloGioacchino Del Regno , Conor Dooley , devicetree@vger.kernel.org, Hans Verkuil , Krzysztof Kozlowski , linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, linux-mediatek@lists.infradead.org, linux-media@vger.kernel.org, Louis Kuo , Matthias Brugger , Mauro Carvalho Chehab , Moudy Ho , Ping-Hsun Wu , Rob Herring Subject: [PATCH v3 4/4] media: platform: mediatek: isp_30: add mediatek ISP3.0 camsv Date: Mon, 7 Aug 2023 11:48:13 +0200 Message-ID: <20230807094940.329165-5-jstephan@baylibre.com> X-Mailer: git-send-email 2.41.0 In-Reply-To: <20230807094940.329165-1-jstephan@baylibre.com> References: <20230807094940.329165-1-jstephan@baylibre.com> MIME-Version: 1.0 To: unlisted-recipients:; (no To-header on input) Precedence: bulk List-ID: X-Mailing-List: linux-media@vger.kernel.org From: Phi-bang Nguyen This driver provides a path to bypass the SoC ISP so that image data coming from the SENINF can go directly into memory without any image processing. This allows the use of an external ISP. Signed-off-by: Phi-bang Nguyen Signed-off-by: Florian Sylvestre Signed-off-by: Laurent Pinchart Signed-off-by: Julien Stephan --- MAINTAINERS | 1 + .../platform/mediatek/isp/isp_30/Kconfig | 19 + .../platform/mediatek/isp/isp_30/Makefile | 1 + .../mediatek/isp/isp_30/camsv/Makefile | 7 + .../mediatek/isp/isp_30/camsv/mtk_camsv.c | 328 ++++++++ .../mediatek/isp/isp_30/camsv/mtk_camsv.h | 196 +++++ .../isp/isp_30/camsv/mtk_camsv30_hw.c | 432 ++++++++++ .../isp/isp_30/camsv/mtk_camsv30_regs.h | 60 ++ .../isp/isp_30/camsv/mtk_camsv_video.c | 781 ++++++++++++++++++ 9 files changed, 1825 insertions(+) create mode 100644 drivers/media/platform/mediatek/isp/isp_30/camsv/Makefile create mode 100644 drivers/media/platform/mediatek/isp/isp_30/camsv/mtk_camsv.c create mode 100644 drivers/media/platform/mediatek/isp/isp_30/camsv/mtk_camsv.h create mode 100644 drivers/media/platform/mediatek/isp/isp_30/camsv/mtk_camsv30_hw.c create mode 100644 drivers/media/platform/mediatek/isp/isp_30/camsv/mtk_camsv30_regs.h create mode 100644 drivers/media/platform/mediatek/isp/isp_30/camsv/mtk_camsv_video.c diff --git a/MAINTAINERS b/MAINTAINERS index fd192d3799b5..22ec98b31520 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -13366,6 +13366,7 @@ M: Andy Hsieh S: Supported F: Documentation/devicetree/bindings/media/mediatek,mt8365-camsv.yaml F: Documentation/devicetree/bindings/media/mediatek,mt8365-seninf.yaml +F: drivers/media/platform/mediatek/isp/isp_30/camsv/* F: drivers/media/platform/mediatek/isp/isp_30/seninf/* MEDIATEK SMI DRIVER diff --git a/drivers/media/platform/mediatek/isp/isp_30/Kconfig b/drivers/media/platform/mediatek/isp/isp_30/Kconfig index 9791312589fb..5293a061ae0b 100644 --- a/drivers/media/platform/mediatek/isp/isp_30/Kconfig +++ b/drivers/media/platform/mediatek/isp/isp_30/Kconfig @@ -14,3 +14,22 @@ config MTK_SENINF30 To compile this driver as a module, choose M here: the module will be called mtk-seninf. + +config MTK_CAMSV30 + tristate "MediaTek ISP3.0 CAMSV driver" + depends on VIDEO_V4L2_SUBDEV_API + depends on ARCH_MEDIATEK || COMPILE_TEST + depends on OF + depends on PM + select VIDEOBUF2_VMALLOC + select VIDEOBUF2_DMA_CONTIG + select MTK_SENINF30 + select PHY_MTK_MIPI_CSI_0_5 + default n + help + This driver provides a path to bypass the SoC ISP so that + image data come from the SENINF can go directly into memory + without any image processing. + + To compile this driver as a module, choose M here: the + module will be called mtk-camsv30. diff --git a/drivers/media/platform/mediatek/isp/isp_30/Makefile b/drivers/media/platform/mediatek/isp/isp_30/Makefile index ac3142de4739..a76f440c5358 100644 --- a/drivers/media/platform/mediatek/isp/isp_30/Makefile +++ b/drivers/media/platform/mediatek/isp/isp_30/Makefile @@ -1,3 +1,4 @@ # SPDX-License-Identifier: GPL-2.0 obj-$(CONFIG_MTK_SENINF30) += seninf/ +obj-$(CONFIG_MTK_CAMSV30) += camsv/ diff --git a/drivers/media/platform/mediatek/isp/isp_30/camsv/Makefile b/drivers/media/platform/mediatek/isp/isp_30/camsv/Makefile new file mode 100644 index 000000000000..fffbc6e7cb78 --- /dev/null +++ b/drivers/media/platform/mediatek/isp/isp_30/camsv/Makefile @@ -0,0 +1,7 @@ +# SPDX-License-Identifier: GPL-2.0 + +mtk-camsv30-objs += mtk_camsv.o +mtk-camsv30-objs += mtk_camsv30_hw.o +mtk-camsv30-objs += mtk_camsv_video.o + +obj-$(CONFIG_MTK_CAMSV30) += mtk-camsv30.o diff --git a/drivers/media/platform/mediatek/isp/isp_30/camsv/mtk_camsv.c b/drivers/media/platform/mediatek/isp/isp_30/camsv/mtk_camsv.c new file mode 100644 index 000000000000..98f3e42ff87f --- /dev/null +++ b/drivers/media/platform/mediatek/isp/isp_30/camsv/mtk_camsv.c @@ -0,0 +1,328 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (c) 2020 BayLibre + * Copyright (c) 2022 MediaTek Inc. + */ + +#include +#include + +#include "mtk_camsv.h" + +static inline struct mtk_cam_dev *to_mtk_cam_dev(struct v4l2_subdev *sd) +{ + return container_of(sd, struct mtk_cam_dev, subdev); +} + +static const u32 mtk_cam_mbus_formats[] = { + MEDIA_BUS_FMT_SBGGR8_1X8, + MEDIA_BUS_FMT_SGBRG8_1X8, + MEDIA_BUS_FMT_SGRBG8_1X8, + MEDIA_BUS_FMT_SRGGB8_1X8, + MEDIA_BUS_FMT_SBGGR10_1X10, + MEDIA_BUS_FMT_SGBRG10_1X10, + MEDIA_BUS_FMT_SGRBG10_1X10, + MEDIA_BUS_FMT_SRGGB10_1X10, + MEDIA_BUS_FMT_SBGGR12_1X12, + MEDIA_BUS_FMT_SGBRG12_1X12, + MEDIA_BUS_FMT_SGRBG12_1X12, + MEDIA_BUS_FMT_SRGGB12_1X12, + MEDIA_BUS_FMT_UYVY8_1X16, + MEDIA_BUS_FMT_VYUY8_1X16, + MEDIA_BUS_FMT_YUYV8_1X16, + MEDIA_BUS_FMT_YVYU8_1X16, +}; + +/* ----------------------------------------------------------------------------- + * V4L2 Subdev Operations + */ + +static int mtk_cam_cio_stream_on(struct mtk_cam_dev *cam) +{ + struct device *dev = cam->dev; + struct v4l2_subdev *seninf; + int ret; + + if (!cam->seninf) { + cam->seninf = media_pad_remote_pad_first(&cam->subdev_pads[MTK_CAM_CIO_PAD_SENINF]); + if (!cam->seninf) { + dev_err(dev, "%s: No SENINF connected\n", __func__); + return -ENOLINK; + } + } + + seninf = media_entity_to_v4l2_subdev(cam->seninf->entity); + + /* Seninf must stream on first */ + ret = v4l2_subdev_call(seninf, pad, enable_streams, NULL, cam->seninf->index, 0); + if (ret) { + dev_err(dev, "failed to stream on %s:%d\n", + seninf->entity.name, ret); + return ret; + } + + cam->streaming = true; + + return 0; +} + +static int mtk_cam_cio_stream_off(struct mtk_cam_dev *cam) +{ + int ret; + + if (cam->seninf) { + struct v4l2_subdev *sd = media_entity_to_v4l2_subdev(cam->seninf->entity); + + ret = v4l2_subdev_call(sd, pad, disable_streams, NULL, + cam->seninf->index, 0); + if (ret) { + dev_err(cam->dev, "failed to stream off %s:%d\n", + sd->entity.name, ret); + return ret; + } + } + + cam->streaming = false; + + return 0; +} + +static int mtk_cam_sd_s_stream(struct v4l2_subdev *sd, int enable) +{ + struct mtk_cam_dev *cam = to_mtk_cam_dev(sd); + + if (enable) { + /* Align vb2_core_streamon design */ + if (cam->streaming) { + dev_warn(cam->dev, "already streaming on\n"); + return 0; + } + return mtk_cam_cio_stream_on(cam); + } + + if (!cam->streaming) { + dev_warn(cam->dev, "already streaming off\n"); + return 0; + } + + return mtk_cam_cio_stream_off(cam); +} + +static struct v4l2_mbus_framefmt * +mtk_cam_get_pad_format(struct mtk_cam_dev *cam, + struct v4l2_subdev_state *sd_state, + unsigned int pad, u32 which) +{ + switch (which) { + case V4L2_SUBDEV_FORMAT_TRY: + return v4l2_subdev_get_try_format(&cam->subdev, sd_state, pad); + case V4L2_SUBDEV_FORMAT_ACTIVE: + return &cam->formats[pad]; + default: + return NULL; + } +} + +static int mtk_cam_init_cfg(struct v4l2_subdev *sd, + struct v4l2_subdev_state *sd_state) +{ + static const struct v4l2_mbus_framefmt def_format = { + .code = MEDIA_BUS_FMT_SGRBG10_1X10, + .width = IMG_DEF_WIDTH, + .height = IMG_DEF_HEIGHT, + .field = V4L2_FIELD_NONE, + .colorspace = V4L2_COLORSPACE_SRGB, + .xfer_func = V4L2_XFER_FUNC_DEFAULT, + .ycbcr_enc = V4L2_YCBCR_ENC_DEFAULT, + .quantization = V4L2_QUANTIZATION_DEFAULT, + }; + + struct mtk_cam_dev *cam = to_mtk_cam_dev(sd); + u32 which = sd_state ? V4L2_SUBDEV_FORMAT_TRY + : V4L2_SUBDEV_FORMAT_ACTIVE; + struct v4l2_mbus_framefmt *format; + unsigned int i; + + for (i = 0; i < sd->entity.num_pads; i++) { + format = mtk_cam_get_pad_format(cam, sd_state, i, which); + *format = def_format; + } + + return 0; +} + +static int mtk_cam_enum_mbus_code(struct v4l2_subdev *sd, + struct v4l2_subdev_state *sd_state, + struct v4l2_subdev_mbus_code_enum *code) +{ + if (code->index >= ARRAY_SIZE(mtk_cam_mbus_formats)) + return -EINVAL; + + code->code = mtk_cam_mbus_formats[code->index]; + + return 0; +} + +static int mtk_cam_get_fmt(struct v4l2_subdev *sd, + struct v4l2_subdev_state *sd_state, + struct v4l2_subdev_format *fmt) +{ + struct mtk_cam_dev *cam = to_mtk_cam_dev(sd); + + fmt->format = *mtk_cam_get_pad_format(cam, sd_state, fmt->pad, + fmt->which); + + return 0; +} + +static int mtk_cam_set_fmt(struct v4l2_subdev *sd, + struct v4l2_subdev_state *sd_state, + struct v4l2_subdev_format *fmt) +{ + struct mtk_cam_dev *cam = to_mtk_cam_dev(sd); + struct v4l2_mbus_framefmt *format; + unsigned int i; + + /* + * We only support pass-through mode, the format on source pads can't + * be modified. + */ + if (fmt->pad != MTK_CAM_CIO_PAD_SENINF) + return mtk_cam_get_fmt(sd, sd_state, fmt); + + for (i = 0; i < ARRAY_SIZE(mtk_cam_mbus_formats); ++i) { + if (mtk_cam_mbus_formats[i] == fmt->format.code) + break; + } + + if (i == ARRAY_SIZE(mtk_cam_mbus_formats)) + fmt->format.code = mtk_cam_mbus_formats[0]; + + format = mtk_cam_get_pad_format(cam, sd_state, fmt->pad, fmt->which); + format->width = fmt->format.width; + format->height = fmt->format.height; + format->code = fmt->format.code; + + fmt->format = *format; + + /* Propagate the format to the source pad. */ + format = mtk_cam_get_pad_format(cam, sd_state, MTK_CAM_CIO_PAD_VIDEO, + fmt->which); + format->width = fmt->format.width; + format->height = fmt->format.height; + format->code = fmt->format.code; + + return 0; +} + +static int mtk_cam_subdev_registered(struct v4l2_subdev *sd) +{ + struct mtk_cam_dev *cam = to_mtk_cam_dev(sd); + + /* Create the video device and link. */ + return mtk_cam_video_register(cam); +} + +static const struct v4l2_subdev_video_ops mtk_cam_subdev_video_ops = { + .s_stream = mtk_cam_sd_s_stream, +}; + +static const struct v4l2_subdev_pad_ops mtk_cam_subdev_pad_ops = { + .init_cfg = mtk_cam_init_cfg, + .enum_mbus_code = mtk_cam_enum_mbus_code, + .set_fmt = mtk_cam_set_fmt, + .get_fmt = mtk_cam_get_fmt, + .link_validate = v4l2_subdev_link_validate_default, +}; + +static const struct v4l2_subdev_ops mtk_cam_subdev_ops = { + .video = &mtk_cam_subdev_video_ops, + .pad = &mtk_cam_subdev_pad_ops, +}; + +static const struct v4l2_subdev_internal_ops mtk_cam_internal_ops = { + .registered = mtk_cam_subdev_registered, +}; + +/* ----------------------------------------------------------------------------- + * Media Entity Operations + */ + +static const struct media_entity_operations mtk_cam_media_entity_ops = { + .link_validate = v4l2_subdev_link_validate, + .get_fwnode_pad = v4l2_subdev_get_fwnode_pad_1_to_1, +}; + +/* ----------------------------------------------------------------------------- + * Init & Cleanup + */ + +static int mtk_cam_v4l2_register(struct mtk_cam_dev *cam) +{ + struct device *dev = cam->dev; + int ret; + + /* Initialize subdev pads */ + ret = media_entity_pads_init(&cam->subdev.entity, + ARRAY_SIZE(cam->subdev_pads), + cam->subdev_pads); + if (ret) { + dev_err(dev, "failed to initialize media pads:%d\n", ret); + return ret; + } + + cam->subdev_pads[MTK_CAM_CIO_PAD_SENINF].flags = MEDIA_PAD_FL_SINK; + cam->subdev_pads[MTK_CAM_CIO_PAD_VIDEO].flags = MEDIA_PAD_FL_SOURCE; + + /* Initialize subdev */ + v4l2_subdev_init(&cam->subdev, &mtk_cam_subdev_ops); + + cam->subdev.dev = dev; + cam->subdev.entity.function = MEDIA_ENT_F_PROC_VIDEO_PIXEL_FORMATTER; + cam->subdev.entity.ops = &mtk_cam_media_entity_ops; + cam->subdev.internal_ops = &mtk_cam_internal_ops; + cam->subdev.flags = V4L2_SUBDEV_FL_HAS_DEVNODE; + strscpy(cam->subdev.name, dev_name(dev), V4L2_SUBDEV_NAME_SIZE); + v4l2_set_subdevdata(&cam->subdev, cam); + + mtk_cam_init_cfg(&cam->subdev, NULL); + + ret = v4l2_async_register_subdev(&cam->subdev); + if (ret) { + dev_err(dev, "failed to initialize subdev:%d\n", ret); + media_entity_cleanup(&cam->subdev.entity); + return ret; + } + + return 0; +} + +static void mtk_cam_v4l2_unregister(struct mtk_cam_dev *cam) +{ + mtk_cam_video_unregister(&cam->vdev); + + media_entity_cleanup(&cam->subdev.entity); + v4l2_async_unregister_subdev(&cam->subdev); +} + +int mtk_cam_dev_init(struct mtk_cam_dev *cam_dev) +{ + int ret; + + mutex_init(&cam_dev->op_lock); + + /* v4l2 sub-device registration */ + ret = mtk_cam_v4l2_register(cam_dev); + if (ret) { + mutex_destroy(&cam_dev->op_lock); + return ret; + } + + return 0; +} + +void mtk_cam_dev_cleanup(struct mtk_cam_dev *cam) +{ + mtk_cam_v4l2_unregister(cam); + mutex_destroy(&cam->op_lock); +} diff --git a/drivers/media/platform/mediatek/isp/isp_30/camsv/mtk_camsv.h b/drivers/media/platform/mediatek/isp/isp_30/camsv/mtk_camsv.h new file mode 100644 index 000000000000..902f2a391064 --- /dev/null +++ b/drivers/media/platform/mediatek/isp/isp_30/camsv/mtk_camsv.h @@ -0,0 +1,196 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Copyright (c) 2020 BayLibre + * Copyright (c) 2022 MediaTek Inc. + */ + +#ifndef __MTK_CAMSV_H__ +#define __MTK_CAMSV_H__ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define IMG_MAX_WIDTH 5376 +#define IMG_MAX_HEIGHT 4032 +#define IMG_DEF_WIDTH 1920 +#define IMG_DEF_HEIGHT 1080 +#define IMG_MIN_WIDTH 80 +#define IMG_MIN_HEIGHT 60 + +#define MTK_CAM_CIO_PAD_SENINF 0 +#define MTK_CAM_CIO_PAD_VIDEO 1 +#define MTK_CAM_CIO_NUM_PADS 2 + +struct mtk_cam_format_info { + u32 code; + u32 fourcc; + bool packed; + u8 bpp; +}; + +struct mtk_cam_dev_buffer { + struct vb2_v4l2_buffer v4l2_buf; + struct list_head list; + dma_addr_t daddr; + dma_addr_t fhaddr; +}; + +struct mtk_cam_sparams { + u32 w_factor; + u32 module_en_pak; + u32 fmt_sel; + u32 pak; + u32 imgo_stride; +}; + +/** + * struct mtk_cam_vdev_desc - MTK camera device descriptor + * @name: name of the node + * @cap: supported V4L2 capabilities + * @buf_type: supported V4L2 buffer type + * @link_flags: default media link flags + * @def_width: the default format width + * @def_height: the default format height + * @num_fmts: the number of supported node formats + * @max_buf_count: maximum VB2 buffer count + * @ioctl_ops: mapped to v4l2_ioctl_ops + * @fmts: supported format + * @frmsizes: supported V4L2 frame size number + */ +struct mtk_cam_vdev_desc { + const char *name; + u32 cap; + u32 buf_type; + u32 link_flags; + u32 def_width; + u32 def_height; + u8 num_fmts; + u8 max_buf_count; + const struct v4l2_ioctl_ops *ioctl_ops; + const u32 *fmts; + const struct v4l2_frmsizeenum *frmsizes; +}; + +/** + * struct mtk_cam_video_device - MediaTek video device structure + * @desc: The node description of video device + * @vdev_pad: The media pad graph object of video device + * @vdev: The video device instance + * @vbq: A videobuf queue of video device + * @vdev_lock: Serializes vb2 queue and video device operations + * @format: The V4L2 format of video device + * @fmtinfo: Information about the current format + */ +struct mtk_cam_video_device { + const struct mtk_cam_vdev_desc *desc; + + struct media_pad vdev_pad; + struct video_device vdev; + struct vb2_queue vbq; + + /* Serializes vb2 queue and video device operations */ + struct mutex vdev_lock; + + struct v4l2_pix_format_mplane format; + const struct mtk_cam_format_info *fmtinfo; +}; + +/** + * struct mtk_cam_dev - MediaTek camera device structure. + * @dev: Pointer to device. + * @regs: Base address of CAMSV. + * @regs_img0: Base address of CAMSV IMG0. + * @regs_tg: Base address of CAMSV TG. + * @num_clks: Number of clocks. + * @clks: The clocks. + * @irq: Irq fired when buffer is ready. + * @conf: soc specific driver data. + * @pipeline: Media pipeline information. + * @subdev: The V4L2 sub-device instance. + * @subdev_pads: Media pads of this sub-device. + * @formats: Media bus format for all pads. + * @vdev: The video device node. + * @seninf: Pointer to the seninf pad. + * @streaming: Indicate the overall streaming status is on or off. + * @stream_count: Number of streaming video nodes. + * @sequence: Buffer sequence number. + * @op_lock: Serializes driver's VB2 callback operations. + * @irqlock: Protects the buffer list. + * @buf_list: List head for the buffer list. + * @hw_functions: Hardware specific functions. + * @dummy: Dummy buffer used when user buffer is not available. + * @dummy_size : Size of the dummy buffer. + * @is_dummy_used: True if dummy buffer is currently used. + */ +struct mtk_cam_dev { + struct device *dev; + void __iomem *regs; + void __iomem *regs_img0; + void __iomem *regs_tg; + + unsigned int num_clks; + struct clk_bulk_data *clks; + unsigned int irq; + const struct mtk_cam_conf *conf; + + struct media_pipeline pipeline; + struct v4l2_subdev subdev; + struct media_pad subdev_pads[MTK_CAM_CIO_NUM_PADS]; + struct v4l2_mbus_framefmt formats[MTK_CAM_CIO_NUM_PADS]; + struct mtk_cam_video_device vdev; + struct media_pad *seninf; + unsigned int streaming; + unsigned int stream_count; + unsigned int sequence; + + struct mutex op_lock; + spinlock_t irqlock; + + struct list_head buf_list; + + struct mtk_cam_hw_functions *hw_functions; + + struct mtk_cam_dev_buffer dummy; + unsigned int dummy_size; + bool is_dummy_used; +}; + +struct mtk_cam_conf { + u32 tg_sen_mode; + u32 module_en; + u32 pak; + u32 dma_special_fun; + u32 imgo_con; + u32 imgo_con2; + u32 imgo_con3; + bool frm_hdr_en; +}; + +struct mtk_cam_hw_functions { + void (*mtk_cam_setup)(struct mtk_cam_dev *cam_dev, u32 width, + u32 height, u32 bpl, u32 mbus_fmt); + void (*mtk_cam_update_buffers_add)(struct mtk_cam_dev *cam_dev, + struct mtk_cam_dev_buffer *buf); + void (*mtk_cam_cmos_vf_hw_enable)(struct mtk_cam_dev *cam_dev, + bool pak_en); + void (*mtk_cam_cmos_vf_hw_disable)(struct mtk_cam_dev *cam_dev, + bool pak_en); +}; + +int mtk_cam_dev_init(struct mtk_cam_dev *cam_dev); +void mtk_cam_dev_cleanup(struct mtk_cam_dev *cam_dev); +int mtk_cam_video_register(struct mtk_cam_dev *cam_dev); +void mtk_cam_video_unregister(struct mtk_cam_video_device *vdev); + +#endif /* __MTK_CAMSV_H__ */ diff --git a/drivers/media/platform/mediatek/isp/isp_30/camsv/mtk_camsv30_hw.c b/drivers/media/platform/mediatek/isp/isp_30/camsv/mtk_camsv30_hw.c new file mode 100644 index 000000000000..bdf878460354 --- /dev/null +++ b/drivers/media/platform/mediatek/isp/isp_30/camsv/mtk_camsv30_hw.c @@ -0,0 +1,432 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (c) 2020 BayLibre + * Copyright (c) 2022 MediaTek Inc. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "mtk_camsv.h" +#include "mtk_camsv30_regs.h" + +#define MTK_CAMSV30_AUTOSUSPEND_DELAY_MS 100 + +static const struct mtk_cam_conf camsv30_conf = { + .tg_sen_mode = 0x00010002U, /* TIME_STP_EN = 1. DBL_DATA_BUS = 1 */ + .module_en = 0x40000001U, /* enable double buffer and TG */ + .dma_special_fun = 0x61000000U, /* enable RDMA insterlace */ + .imgo_con = 0x80000080U, /* DMA FIFO depth and burst */ + .imgo_con2 = 0x00020002U, /* DMA priority */ + .imgo_con3 = 0x00020002U, /* DMA pre-priority */ + .frm_hdr_en = false, /* Frame Header disabled */ +}; + +static void fmt_to_sparams(u32 mbus_fmt, struct mtk_cam_sparams *sparams) +{ + switch (mbus_fmt) { + /* SBGGR values coming from isp5.0 configuration. + * not tested on isp2.0 + */ + case MEDIA_BUS_FMT_SBGGR12_1X12: + case MEDIA_BUS_FMT_SGBRG12_1X12: + case MEDIA_BUS_FMT_SGRBG12_1X12: + case MEDIA_BUS_FMT_SRGGB12_1X12: + sparams->w_factor = 1; + sparams->module_en_pak = 0x4; + sparams->fmt_sel = 0x2; + sparams->pak = 0x5; + sparams->imgo_stride = 0x000B0000; + break; + case MEDIA_BUS_FMT_SBGGR10_1X10: + case MEDIA_BUS_FMT_SGBRG10_1X10: + case MEDIA_BUS_FMT_SGRBG10_1X10: + case MEDIA_BUS_FMT_SRGGB10_1X10: + sparams->w_factor = 1; + sparams->module_en_pak = 0x4; + sparams->fmt_sel = 0x1; + sparams->pak = 0x6; + sparams->imgo_stride = 0x000B0000; + break; + case MEDIA_BUS_FMT_SBGGR8_1X8: + case MEDIA_BUS_FMT_SGBRG8_1X8: + case MEDIA_BUS_FMT_SGRBG8_1X8: + case MEDIA_BUS_FMT_SRGGB8_1X8: + sparams->w_factor = 1; + sparams->module_en_pak = 0x4; + sparams->fmt_sel = 0x0; + sparams->pak = 0x7; + sparams->imgo_stride = 0x000B0000; + break; + case MEDIA_BUS_FMT_UYVY8_1X16: + case MEDIA_BUS_FMT_VYUY8_1X16: + case MEDIA_BUS_FMT_YUYV8_1X16: + case MEDIA_BUS_FMT_YVYU8_1X16: + sparams->w_factor = 2; + sparams->module_en_pak = 0x8; + sparams->fmt_sel = 0x1000003; + sparams->pak = 0x0; + sparams->imgo_stride = 0x00090000; + break; + default: + break; + } +} + +static void mtk_camsv30_update_buffers_add(struct mtk_cam_dev *cam_dev, + struct mtk_cam_dev_buffer *buf) +{ + writel(buf->daddr, cam_dev->regs_img0 + CAMSV_IMGO_SV_BASE_ADDR); + + writel(0x1U, cam_dev->regs + CAMSV_IMGO_FBC); +} + +static void mtk_camsv30_cmos_vf_hw_enable(struct mtk_cam_dev *cam_dev, + bool pak_en) +{ + u32 clk_en; + + clk_en = CAMSV_TG_DP_CLK_EN | CAMSV_DMA_DP_CLK_EN; + if (pak_en) + clk_en |= CAMSV_PAK_DP_CLK_EN; + writel(clk_en, cam_dev->regs + CAMSV_CLK_EN); + writel(readl(cam_dev->regs_tg + CAMSV_TG_VF_CON) | CAMSV_TG_VF_CON_VFDATA_EN, + cam_dev->regs_tg + CAMSV_TG_VF_CON); +} + +static void mtk_camsv30_cmos_vf_hw_disable(struct mtk_cam_dev *cam_dev, + bool pak_en) +{ + writel(readl(cam_dev->regs_tg + CAMSV_TG_SEN_MODE) & ~CAMSV_TG_SEN_MODE_CMOS_EN, + cam_dev->regs_tg + CAMSV_TG_SEN_MODE); + writel(readl(cam_dev->regs_tg + CAMSV_TG_VF_CON) & ~CAMSV_TG_VF_CON_VFDATA_EN, + cam_dev->regs_tg + CAMSV_TG_VF_CON); +} + +static void mtk_camsv30_setup(struct mtk_cam_dev *cam_dev, u32 w, u32 h, + u32 bpl, u32 mbus_fmt) +{ + const struct mtk_cam_conf *conf = cam_dev->conf; + u32 int_en = INT_ST_MASK_CAMSV; + u32 tmp; + struct mtk_cam_sparams sparams; + + fmt_to_sparams(mbus_fmt, &sparams); + + spin_lock(&cam_dev->irqlock); + + if (pm_runtime_get_sync(cam_dev->dev) < 0) { + dev_err(cam_dev->dev, "failed to get pm_runtime\n"); + spin_unlock(&cam_dev->irqlock); + return; + } + + writel(conf->tg_sen_mode, cam_dev->regs_tg + CAMSV_TG_SEN_MODE); + + writel((w * sparams.w_factor) << 16U, cam_dev->regs_tg + CAMSV_TG_SEN_GRAB_PXL); + + writel(h << 16U, cam_dev->regs_tg + CAMSV_TG_SEN_GRAB_LIN); + + /* YUV_U2S_DIS: disable YUV sensor unsigned to signed */ + writel(0x1000U, cam_dev->regs_tg + CAMSV_TG_PATH_CFG); + + /* Reset cam */ + writel(CAMSV_SW_RST, cam_dev->regs + CAMSV_SW_CTL); + writel(0x0U, cam_dev->regs + CAMSV_SW_CTL); + writel(CAMSV_IMGO_RST_TRIG, cam_dev->regs + CAMSV_SW_CTL); + + readl_poll_timeout(cam_dev->regs + CAMSV_SW_CTL, tmp, + (tmp == (CAMSV_IMGO_RST_TRIG | CAMSV_IMGO_RST_ST)), 10, 200); + + writel(0x0U, cam_dev->regs + CAMSV_SW_CTL); + + writel(int_en, cam_dev->regs + CAMSV_INT_EN); + + writel(conf->module_en | sparams.module_en_pak, + cam_dev->regs + CAMSV_MODULE_EN); + writel(sparams.fmt_sel, cam_dev->regs + CAMSV_FMT_SEL); + writel(sparams.pak, cam_dev->regs + CAMSV_PAK); + + writel(bpl - 1U, cam_dev->regs_img0 + CAMSV_IMGO_SV_XSIZE); + writel(h - 1U, cam_dev->regs_img0 + CAMSV_IMGO_SV_YSIZE); + + writel(sparams.imgo_stride | bpl, cam_dev->regs_img0 + CAMSV_IMGO_SV_STRIDE); + + writel(conf->imgo_con, cam_dev->regs_img0 + CAMSV_IMGO_SV_CON); + writel(conf->imgo_con2, cam_dev->regs_img0 + CAMSV_IMGO_SV_CON2); + + /* CMOS_EN first */ + writel(readl(cam_dev->regs_tg + CAMSV_TG_SEN_MODE) | CAMSV_TG_SEN_MODE_CMOS_EN, + cam_dev->regs_tg + CAMSV_TG_SEN_MODE); + + /* finally, CAMSV_MODULE_EN : IMGO_EN */ + writel(readl(cam_dev->regs + CAMSV_MODULE_EN) | CAMSV_MODULE_EN_IMGO_EN, + cam_dev->regs + CAMSV_MODULE_EN); + + pm_runtime_put_autosuspend(cam_dev->dev); + spin_unlock(&cam_dev->irqlock); +} + +static irqreturn_t isp_irq_camsv30(int irq, void *data) +{ + struct mtk_cam_dev *cam_dev = (struct mtk_cam_dev *)data; + struct mtk_cam_dev_buffer *buf; + unsigned long flags = 0; + unsigned int irq_status; + + spin_lock_irqsave(&cam_dev->irqlock, flags); + + irq_status = readl(cam_dev->regs + CAMSV_INT_STATUS); + + if (irq_status & INT_ST_MASK_CAMSV_ERR) { + dev_err(cam_dev->dev, "irq error 0x%x\n", + (unsigned int)(irq_status & INT_ST_MASK_CAMSV_ERR)); + } + + /* De-queue frame */ + if (irq_status & CAMSV_IRQ_PASS1_DON) { + cam_dev->sequence++; + + if (!cam_dev->is_dummy_used) { + buf = list_first_entry_or_null(&cam_dev->buf_list, + struct mtk_cam_dev_buffer, + list); + if (buf) { + buf->v4l2_buf.sequence = cam_dev->sequence; + buf->v4l2_buf.vb2_buf.timestamp = ktime_get_ns(); + vb2_buffer_done(&buf->v4l2_buf.vb2_buf, + VB2_BUF_STATE_DONE); + list_del(&buf->list); + } + } + + if (list_empty(&cam_dev->buf_list)) { + mtk_camsv30_update_buffers_add(cam_dev, &cam_dev->dummy); + cam_dev->is_dummy_used = true; + } else { + buf = list_first_entry_or_null(&cam_dev->buf_list, + struct mtk_cam_dev_buffer, + list); + mtk_camsv30_update_buffers_add(cam_dev, buf); + cam_dev->is_dummy_used = false; + } + } + + spin_unlock_irqrestore(&cam_dev->irqlock, flags); + + return IRQ_HANDLED; +} + +static int mtk_camsv30_runtime_suspend(struct device *dev) +{ + struct mtk_cam_dev *cam_dev = dev_get_drvdata(dev); + struct vb2_queue *vbq = &cam_dev->vdev.vbq; + + if (vb2_is_streaming(vbq)) { + mutex_lock(&cam_dev->op_lock); + v4l2_subdev_call(&cam_dev->subdev, video, s_stream, 0); + mutex_unlock(&cam_dev->op_lock); + } + + clk_bulk_disable_unprepare(cam_dev->num_clks, cam_dev->clks); + + return 0; +} + +static int mtk_camsv30_runtime_resume(struct device *dev) +{ + struct mtk_cam_dev *cam_dev = dev_get_drvdata(dev); + struct mtk_cam_video_device *vdev = &cam_dev->vdev; + const struct v4l2_pix_format_mplane *fmt = &vdev->format; + struct vb2_queue *vbq = &vdev->vbq; + struct mtk_cam_dev_buffer *buf, *buf_prev; + int ret; + unsigned long flags = 0; + + ret = clk_bulk_prepare_enable(cam_dev->num_clks, cam_dev->clks); + if (ret) { + dev_err(dev, "failed to enable clock:%d\n", ret); + return ret; + } + + if (vb2_is_streaming(vbq)) { + spin_lock_irqsave(&cam_dev->irqlock, flags); + + mtk_camsv30_setup(cam_dev, fmt->width, fmt->height, + fmt->plane_fmt[0].bytesperline, vdev->fmtinfo->code); + + buf = list_first_entry_or_null(&cam_dev->buf_list, + struct mtk_cam_dev_buffer, + list); + if (buf) { + mtk_camsv30_update_buffers_add(cam_dev, buf); + cam_dev->is_dummy_used = false; + } else { + mtk_camsv30_update_buffers_add(cam_dev, &cam_dev->dummy); + cam_dev->is_dummy_used = true; + } + + mtk_camsv30_cmos_vf_hw_enable(cam_dev, vdev->fmtinfo->packed); + + spin_unlock_irqrestore(&cam_dev->irqlock, flags); + + /* Stream on the sub-device */ + mutex_lock(&cam_dev->op_lock); + ret = v4l2_subdev_call(&cam_dev->subdev, video, s_stream, 1); + + if (ret) { + cam_dev->stream_count--; + if (cam_dev->stream_count == 0) + media_pipeline_stop(vdev->vdev.entity.pads); + } + mutex_unlock(&cam_dev->op_lock); + + if (ret) + goto fail_no_stream; + } + + return 0; + +fail_no_stream: + spin_lock_irqsave(&cam_dev->irqlock, flags); + list_for_each_entry_safe(buf, buf_prev, &cam_dev->buf_list, list) { + buf->daddr = 0ULL; + list_del(&buf->list); + vb2_buffer_done(&buf->v4l2_buf.vb2_buf, VB2_BUF_STATE_ERROR); + } + spin_unlock_irqrestore(&cam_dev->irqlock, flags); + return ret; +} + +static struct mtk_cam_hw_functions mtk_camsv30_hw_functions = { + .mtk_cam_setup = mtk_camsv30_setup, + .mtk_cam_update_buffers_add = mtk_camsv30_update_buffers_add, + .mtk_cam_cmos_vf_hw_enable = mtk_camsv30_cmos_vf_hw_enable, + .mtk_cam_cmos_vf_hw_disable = mtk_camsv30_cmos_vf_hw_disable, +}; + +static int mtk_camsv30_probe(struct platform_device *pdev) +{ + static const char * const clk_names[] = { "cam", "camtg", "camsv"}; + + struct mtk_cam_dev *cam_dev; + struct device *dev = &pdev->dev; + int ret; + int i; + + if (!iommu_present(&platform_bus_type)) + return -EPROBE_DEFER; + + cam_dev = devm_kzalloc(dev, sizeof(*cam_dev), GFP_KERNEL); + if (!cam_dev) + return -ENOMEM; + + cam_dev->conf = of_device_get_match_data(dev); + if (!cam_dev->conf) + return -ENODEV; + + cam_dev->dev = dev; + dev_set_drvdata(dev, cam_dev); + + cam_dev->regs = devm_platform_ioremap_resource(pdev, 0); + if (IS_ERR(cam_dev->regs)) + return dev_err_probe(dev, PTR_ERR(cam_dev->regs), + "failed to map register base\n"); + + + cam_dev->regs_img0 = devm_platform_ioremap_resource(pdev, 1); + + if (IS_ERR(cam_dev->regs_img0)) + return dev_err_probe(dev, PTR_ERR(cam_dev->regs_img0), + "failed to map img0 register base\n"); + + + cam_dev->regs_tg = devm_platform_ioremap_resource(pdev, 2); + if (IS_ERR(cam_dev->regs_tg)) + return dev_err_probe(dev, PTR_ERR(cam_dev->regs_tg), + "failed to map TG register base\n"); + + + cam_dev->num_clks = ARRAY_SIZE(clk_names); + cam_dev->clks = devm_kcalloc(dev, cam_dev->num_clks, + sizeof(*cam_dev->clks), GFP_KERNEL); + if (!cam_dev->clks) + return -ENOMEM; + + for (i = 0; i < cam_dev->num_clks; ++i) + cam_dev->clks[i].id = clk_names[i]; + + ret = devm_clk_bulk_get(dev, cam_dev->num_clks, cam_dev->clks); + if (ret) + return dev_err_probe(dev, ret, "failed to get clocks: %i\n", ret); + + + cam_dev->irq = platform_get_irq(pdev, 0); + ret = devm_request_irq(dev, cam_dev->irq, + isp_irq_camsv30, 0, + dev_name(dev), cam_dev); + if (ret != 0) + return dev_err_probe(dev, -ENODEV, "failed to request irq=%d\n", + cam_dev->irq); + + cam_dev->hw_functions = &mtk_camsv30_hw_functions; + + spin_lock_init(&cam_dev->irqlock); + + /* initialise runtime power management */ + pm_runtime_set_autosuspend_delay(dev, MTK_CAMSV30_AUTOSUSPEND_DELAY_MS); + pm_runtime_use_autosuspend(dev); + pm_runtime_set_suspended(dev); + pm_runtime_enable(dev); + + /* Initialize the v4l2 common part */ + return mtk_cam_dev_init(cam_dev); +} + +static int mtk_camsv30_remove(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct mtk_cam_dev *cam_dev = dev_get_drvdata(dev); + + mtk_cam_dev_cleanup(cam_dev); + pm_runtime_put_autosuspend(dev); + pm_runtime_disable(dev); + + return 0; +} + +static const struct dev_pm_ops mtk_camsv30_pm_ops = { + SET_SYSTEM_SLEEP_PM_OPS(pm_runtime_force_suspend, + pm_runtime_force_resume) + SET_RUNTIME_PM_OPS(mtk_camsv30_runtime_suspend, + mtk_camsv30_runtime_resume, NULL) +}; + +static const struct of_device_id mtk_camsv30_of_ids[] = { + { .compatible = "mediatek,mt8365-camsv", .data = &camsv30_conf }, + { /* sentinel */ } +}; +MODULE_DEVICE_TABLE(of, mtk_camsv30_of_ids); + +static struct platform_driver mtk_camsv30_driver = { + .probe = mtk_camsv30_probe, + .remove = mtk_camsv30_remove, + .driver = { + .name = "mtk-camsv-isp30", + .of_match_table = mtk_camsv30_of_ids, + .pm = &mtk_camsv30_pm_ops, + } +}; + +module_platform_driver(mtk_camsv30_driver); + +MODULE_DESCRIPTION("MediaTek CAMSV ISP3.0 driver"); +MODULE_AUTHOR("Florian Sylvestre "); +MODULE_LICENSE("GPL"); diff --git a/drivers/media/platform/mediatek/isp/isp_30/camsv/mtk_camsv30_regs.h b/drivers/media/platform/mediatek/isp/isp_30/camsv/mtk_camsv30_regs.h new file mode 100644 index 000000000000..6d30087270cc --- /dev/null +++ b/drivers/media/platform/mediatek/isp/isp_30/camsv/mtk_camsv30_regs.h @@ -0,0 +1,60 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Copyright (c) 2022 MediaTek Inc. + */ + +#ifndef __MTK_CAMSV30_REGS_H__ +#define __MTK_CAMSV30_REGS_H__ + +/* CAMSV */ +#define CAMSV_MODULE_EN 0x0000 +#define CAMSV_MODULE_EN_IMGO_EN BIT(4) +#define CAMSV_FMT_SEL 0x0004 +#define CAMSV_INT_EN 0x0008 +#define CAMSV_INT_STATUS 0x000c +#define CAMSV_SW_CTL 0x0010 +#define CAMSV_IMGO_FBC 0x001C +#define CAMSV_CLK_EN 0x0020 +#define CAMSV_PAK 0x003c + +/* CAMSV_TG */ +#define CAMSV_TG_SEN_MODE 0x0010 +#define CAMSV_TG_VF_CON 0x0014 +#define CAMSV_TG_SEN_GRAB_PXL 0x0018 +#define CAMSV_TG_SEN_GRAB_LIN 0x001c +#define CAMSV_TG_PATH_CFG 0x0020 + +/* CAMSV_IMG0 */ +#define CAMSV_IMGO_SV_BASE_ADDR 0x0000 +#define CAMSV_IMGO_SV_XSIZE 0x0008 +#define CAMSV_IMGO_SV_YSIZE 0x000c +#define CAMSV_IMGO_SV_STRIDE 0x0010 +#define CAMSV_IMGO_SV_CON 0x0014 +#define CAMSV_IMGO_SV_CON2 0x0018 + +#define CAMSV_TG_SEN_MODE_CMOS_EN BIT(0) +#define CAMSV_TG_VF_CON_VFDATA_EN BIT(0) + +/* CAMSV_CLK_EN bits */ +#define CAMSV_TG_DP_CLK_EN BIT(0) +#define CAMSV_PAK_DP_CLK_EN BIT(2) +#define CAMSV_DMA_DP_CLK_EN BIT(15) + +/* CAMSV_SW_CTL bits */ +#define CAMSV_IMGO_RST_TRIG BIT(0) +#define CAMSV_IMGO_RST_ST BIT(1) +#define CAMSV_SW_RST BIT(2) + +/* IRQ BITS */ +#define CAMSV_IRQ_TG_ERR BIT(4) +#define CAMSV_IRQ_TG_GBERR BIT(5) +#define CAMSV_IRQ_PASS1_DON BIT(10) +#define CAMSV_IRQ_IMGO_ERR BIT(16) + +#define INT_ST_MASK_CAMSV \ + (CAMSV_IRQ_PASS1_DON) + +#define INT_ST_MASK_CAMSV_ERR \ + (CAMSV_IRQ_TG_ERR | CAMSV_IRQ_TG_GBERR | CAMSV_IRQ_IMGO_ERR) + +#endif /* __MTK_CAMSV30_REGS_H__ */ diff --git a/drivers/media/platform/mediatek/isp/isp_30/camsv/mtk_camsv_video.c b/drivers/media/platform/mediatek/isp/isp_30/camsv/mtk_camsv_video.c new file mode 100644 index 000000000000..f879726eacd8 --- /dev/null +++ b/drivers/media/platform/mediatek/isp/isp_30/camsv/mtk_camsv_video.c @@ -0,0 +1,781 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * mtk_camsv_video.c - V4L2 video node support + * + * Copyright (c) 2020 BayLibre + * Copyright (c) 2022 MediaTek Inc. + */ + +#include +#include +#include +#include +#include + +#include "mtk_camsv.h" + +static inline struct mtk_cam_video_device * +file_to_mtk_cam_video_device(struct file *__file) +{ + return container_of(video_devdata(__file), + struct mtk_cam_video_device, vdev); +} + +static inline struct mtk_cam_video_device * +vb2_queue_to_mtk_cam_video_device(struct vb2_queue *vq) +{ + return container_of(vq, struct mtk_cam_video_device, vbq); +} + +static inline struct mtk_cam_dev_buffer * +to_mtk_cam_dev_buffer(struct vb2_buffer *buf) +{ + return container_of(buf, struct mtk_cam_dev_buffer, v4l2_buf.vb2_buf); +} + +/* ----------------------------------------------------------------------------- + * Format Information + */ + +static const struct mtk_cam_format_info mtk_cam_format_info[] = { + { + .fourcc = V4L2_PIX_FMT_SBGGR8, + .code = MEDIA_BUS_FMT_SBGGR8_1X8, + .packed = true, + .bpp = 8, + }, { + .fourcc = V4L2_PIX_FMT_SGBRG8, + .code = MEDIA_BUS_FMT_SGBRG8_1X8, + .packed = true, + .bpp = 8, + }, { + .fourcc = V4L2_PIX_FMT_SGRBG8, + .code = MEDIA_BUS_FMT_SGRBG8_1X8, + .packed = true, + .bpp = 8, + }, { + .fourcc = V4L2_PIX_FMT_SRGGB8, + .code = MEDIA_BUS_FMT_SRGGB8_1X8, + .packed = true, + .bpp = 8, + }, { + .fourcc = V4L2_PIX_FMT_YUYV, + .code = MEDIA_BUS_FMT_YUYV8_1X16, + .packed = true, + .bpp = 16, + }, { + .fourcc = V4L2_PIX_FMT_YVYU, + .code = MEDIA_BUS_FMT_YVYU8_1X16, + .packed = true, + .bpp = 16, + }, { + .fourcc = V4L2_PIX_FMT_UYVY, + .code = MEDIA_BUS_FMT_UYVY8_1X16, + .packed = true, + .bpp = 16, + }, { + .fourcc = V4L2_PIX_FMT_VYUY, + .code = MEDIA_BUS_FMT_VYUY8_1X16, + .packed = true, + .bpp = 16, + }, +}; + +static const struct mtk_cam_format_info * +mtk_cam_format_info_by_fourcc(u32 fourcc) +{ + unsigned int i; + + for (i = 0; i < ARRAY_SIZE(mtk_cam_format_info); ++i) { + const struct mtk_cam_format_info *info = + &mtk_cam_format_info[i]; + + if (info->fourcc == fourcc) + return info; + } + + return NULL; +} + +static const struct mtk_cam_format_info * +mtk_cam_format_info_by_code(u32 code) +{ + unsigned int i; + + for (i = 0; i < ARRAY_SIZE(mtk_cam_format_info); ++i) { + const struct mtk_cam_format_info *info = + &mtk_cam_format_info[i]; + + if (info->code == code) + return info; + } + + return NULL; +} + +static bool mtk_cam_dev_find_fmt(const struct mtk_cam_vdev_desc *desc, + u32 format) +{ + unsigned int i; + + for (i = 0; i < desc->num_fmts; i++) { + if (desc->fmts[i] == format) + return true; + } + + return false; +} + +static void calc_bpl_size_pix_mp(const struct mtk_cam_format_info *fmtinfo, + struct v4l2_pix_format_mplane *pix_mp) +{ + unsigned int bpl; + unsigned int i; + + bpl = ALIGN(DIV_ROUND_UP(pix_mp->width * fmtinfo->bpp, 8), 2); + + for (i = 0; i < pix_mp->num_planes; ++i) { + pix_mp->plane_fmt[i].bytesperline = bpl; + pix_mp->plane_fmt[i].sizeimage = bpl * pix_mp->height; + } +} + +static void mtk_cam_dev_load_default_fmt(struct mtk_cam_dev *cam) +{ + struct mtk_cam_video_device *vdev = &cam->vdev; + struct v4l2_pix_format_mplane *fmt = &vdev->format; + + fmt->num_planes = cam->conf->frm_hdr_en ? 2 : 1; + fmt->pixelformat = vdev->desc->fmts[0]; + fmt->width = vdev->desc->def_width; + fmt->height = vdev->desc->def_height; + + fmt->colorspace = V4L2_COLORSPACE_SRGB; + fmt->field = V4L2_FIELD_NONE; + fmt->ycbcr_enc = V4L2_YCBCR_ENC_DEFAULT; + fmt->quantization = V4L2_QUANTIZATION_DEFAULT; + fmt->xfer_func = V4L2_XFER_FUNC_DEFAULT; + + vdev->fmtinfo = mtk_cam_format_info_by_fourcc(fmt->pixelformat); + + calc_bpl_size_pix_mp(vdev->fmtinfo, fmt); +} + +/* ----------------------------------------------------------------------------- + * VB2 Queue Operations + */ + +static int mtk_cam_vb2_queue_setup(struct vb2_queue *vq, + unsigned int *num_buffers, + unsigned int *num_planes, + unsigned int sizes[], + struct device *alloc_devs[]) +{ + struct mtk_cam_video_device *vdev = + vb2_queue_to_mtk_cam_video_device(vq); + unsigned int max_buffer_count = vdev->desc->max_buf_count; + const struct v4l2_pix_format_mplane *fmt = &vdev->format; + struct mtk_cam_dev *cam = vb2_get_drv_priv(vq); + unsigned int size; + unsigned int np_conf; + unsigned int i; + + /* Check the limitation of buffer size */ + if (max_buffer_count) + *num_buffers = clamp_val(*num_buffers, 1, max_buffer_count); + + size = fmt->plane_fmt[0].sizeimage; + /* Add for q.create_bufs with fmt.g_sizeimage(p) / 2 test */ + + np_conf = cam->conf->frm_hdr_en ? 2 : 1; + + if (*num_planes == 0) { + *num_planes = np_conf; + for (i = 0; i < *num_planes; ++i) + sizes[i] = size; + } else if (*num_planes != np_conf || sizes[0] < size) { + return -EINVAL; + } + + (*cam->hw_functions->mtk_cam_setup)(cam, fmt->width, fmt->height, + fmt->plane_fmt[0].bytesperline, vdev->fmtinfo->code); + + return 0; +} + +static int mtk_cam_vb2_buf_init(struct vb2_buffer *vb) +{ + struct mtk_cam_dev_buffer *buf = to_mtk_cam_dev_buffer(vb); + + buf->daddr = 0ULL; + + return 0; +} + +static int mtk_cam_vb2_buf_prepare(struct vb2_buffer *vb) +{ + struct mtk_cam_video_device *vdev = + vb2_queue_to_mtk_cam_video_device(vb->vb2_queue); + struct mtk_cam_dev *cam = vb2_get_drv_priv(vb->vb2_queue); + struct mtk_cam_dev_buffer *buf = to_mtk_cam_dev_buffer(vb); + const struct v4l2_pix_format_mplane *fmt = &vdev->format; + u32 size; + int i; + + for (i = 0; i < vb->num_planes; i++) { + size = fmt->plane_fmt[i].sizeimage; + if (vb2_plane_size(vb, i) < size) { + dev_err(cam->dev, "plane size is too small:%lu<%u\n", + vb2_plane_size(vb, i), size); + return -EINVAL; + } + } + + buf->v4l2_buf.field = V4L2_FIELD_NONE; + + for (i = 0; i < vb->num_planes; i++) { + size = fmt->plane_fmt[i].sizeimage; + vb2_set_plane_payload(vb, i, size); + } + + if (buf->daddr == 0ULL) { + buf->daddr = vb2_dma_contig_plane_dma_addr(vb, 0); + if (cam->conf->frm_hdr_en) + buf->fhaddr = vb2_dma_contig_plane_dma_addr(vb, 1); + } + + return 0; +} + +static void mtk_cam_vb2_buf_queue(struct vb2_buffer *vb) +{ + struct mtk_cam_dev *cam = vb2_get_drv_priv(vb->vb2_queue); + struct mtk_cam_dev_buffer *buf = to_mtk_cam_dev_buffer(vb); + unsigned long flags = 0; + + /* added the buffer into the tracking list */ + spin_lock_irqsave(&cam->irqlock, flags); + list_add_tail(&buf->list, &cam->buf_list); + spin_unlock_irqrestore(&cam->irqlock, flags); +} + +static void mtk_cam_vb2_return_all_buffers(struct mtk_cam_dev *cam, + enum vb2_buffer_state state) +{ + struct mtk_cam_dev_buffer *buf, *buf_prev; + unsigned long flags = 0; + + spin_lock_irqsave(&cam->irqlock, flags); + list_for_each_entry_safe(buf, buf_prev, &cam->buf_list, list) { + buf->daddr = 0ULL; + list_del(&buf->list); + vb2_buffer_done(&buf->v4l2_buf.vb2_buf, state); + } + spin_unlock_irqrestore(&cam->irqlock, flags); +} + +static void mtk_cam_cmos_vf_enable(struct mtk_cam_dev *cam_dev, + bool enable, bool pak_en) +{ + struct device *dev = cam_dev->dev; + unsigned long flags = 0; + + if (pm_runtime_get_sync(dev) < 0) { + dev_err(dev, "failed to get pm_runtime\n"); + goto out; + } + + spin_lock_irqsave(&cam_dev->irqlock, flags); + if (enable) + (*cam_dev->hw_functions->mtk_cam_cmos_vf_hw_enable)(cam_dev, pak_en); + else + (*cam_dev->hw_functions->mtk_cam_cmos_vf_hw_disable)(cam_dev, pak_en); + spin_unlock_irqrestore(&cam_dev->irqlock, flags); + +out: + pm_runtime_put_autosuspend(dev); +} + +static int mtk_cam_verify_format(struct mtk_cam_dev *cam) +{ + struct mtk_cam_video_device *vdev = &cam->vdev; + struct v4l2_subdev_format fmt = { + .which = V4L2_SUBDEV_FORMAT_ACTIVE, + .pad = MTK_CAM_CIO_PAD_VIDEO, + }; + int ret; + + ret = v4l2_subdev_call(&cam->subdev, pad, get_fmt, NULL, &fmt); + if (ret < 0) + return ret == -ENOIOCTLCMD ? -EINVAL : ret; + + if (vdev->fmtinfo->code != fmt.format.code || + vdev->format.height != fmt.format.height || + vdev->format.width != fmt.format.width) + return -EINVAL; + + return 0; +} + +static int mtk_cam_vb2_start_streaming(struct vb2_queue *vq, + unsigned int count) +{ + struct mtk_cam_dev *cam = vb2_get_drv_priv(vq); + struct mtk_cam_dev_buffer *buf; + struct mtk_cam_video_device *vdev = + vb2_queue_to_mtk_cam_video_device(vq); + struct device *dev = cam->dev; + const struct v4l2_pix_format_mplane *fmt = &vdev->format; + int ret; + unsigned long flags = 0; + + if (pm_runtime_get_sync(dev) < 0) { + dev_err(dev, "failed to get pm_runtime\n"); + pm_runtime_put_autosuspend(dev); + return -1; + } + + /* Enable CMOS and VF */ + mtk_cam_cmos_vf_enable(cam, true, vdev->fmtinfo->packed); + + mutex_lock(&cam->op_lock); + + ret = mtk_cam_verify_format(cam); + if (ret < 0) + goto fail_unlock; + + /* Start streaming of the whole pipeline now*/ + if (!cam->pipeline.start_count) { + ret = media_pipeline_start(vdev->vdev.entity.pads, + &cam->pipeline); + if (ret) { + dev_err(dev, "failed to start pipeline:%d\n", ret); + goto fail_unlock; + } + } + + /* Media links are fixed after media_pipeline_start */ + cam->stream_count++; + + cam->sequence = (unsigned int)-1; + + /* Stream on the sub-device */ + ret = v4l2_subdev_call(&cam->subdev, video, s_stream, 1); + if (ret) + goto fail_no_stream; + + mutex_unlock(&cam->op_lock); + + /* Create dummy buffer */ + cam->dummy_size = fmt->plane_fmt[0].sizeimage; + + cam->dummy.fhaddr = (dma_addr_t)dma_alloc_coherent(cam->dev, + cam->dummy_size, + &cam->dummy.daddr, GFP_KERNEL); + if (!cam->dummy.fhaddr) { + dev_err(cam->dev, "can't allocate dummy buffer\n"); + ret = -ENOMEM; + goto fail_no_buffer; + } + + /* update first buffer address */ + + /* added the buffer into the tracking list */ + spin_lock_irqsave(&cam->irqlock, flags); + if (list_empty(&cam->buf_list)) { + (*cam->hw_functions->mtk_cam_update_buffers_add)(cam, &cam->dummy); + cam->is_dummy_used = true; + } else { + buf = list_first_entry_or_null(&cam->buf_list, + struct mtk_cam_dev_buffer, + list); + (*cam->hw_functions->mtk_cam_update_buffers_add)(cam, buf); + cam->is_dummy_used = false; + } + spin_unlock_irqrestore(&cam->irqlock, flags); + + return 0; + +fail_no_buffer: + mutex_lock(&cam->op_lock); + v4l2_subdev_call(&cam->subdev, video, s_stream, 0); +fail_no_stream: + cam->stream_count--; + if (cam->stream_count == 0) + media_pipeline_stop(vdev->vdev.entity.pads); +fail_unlock: + mutex_unlock(&cam->op_lock); + mtk_cam_vb2_return_all_buffers(cam, VB2_BUF_STATE_QUEUED); + + return ret; +} + +static void mtk_cam_vb2_stop_streaming(struct vb2_queue *vq) +{ + struct mtk_cam_dev *cam = vb2_get_drv_priv(vq); + struct mtk_cam_video_device *vdev = + vb2_queue_to_mtk_cam_video_device(vq); + + /* Disable CMOS and VF */ + mtk_cam_cmos_vf_enable(cam, false, false); + + mutex_lock(&cam->op_lock); + + v4l2_subdev_call(&cam->subdev, video, s_stream, 0); + + mtk_cam_vb2_return_all_buffers(cam, VB2_BUF_STATE_ERROR); + cam->stream_count--; + if (cam->stream_count) { + mutex_unlock(&cam->op_lock); + return; + } + + /* Destroy dummy buffer */ + if (cam->dummy.fhaddr) { + dma_free_coherent(cam->dev, cam->dummy_size, + (void *)cam->dummy.fhaddr, + cam->dummy.daddr); + memset(&cam->dummy, 0, sizeof(cam->dummy)); + cam->dummy_size = 0; + cam->is_dummy_used = false; + } + + mutex_unlock(&cam->op_lock); + + media_pipeline_stop(vdev->vdev.entity.pads); +} + +static const struct vb2_ops mtk_cam_vb2_ops = { + .queue_setup = mtk_cam_vb2_queue_setup, + .buf_init = mtk_cam_vb2_buf_init, + .buf_prepare = mtk_cam_vb2_buf_prepare, + .buf_queue = mtk_cam_vb2_buf_queue, + .start_streaming = mtk_cam_vb2_start_streaming, + .stop_streaming = mtk_cam_vb2_stop_streaming, + .wait_prepare = vb2_ops_wait_prepare, + .wait_finish = vb2_ops_wait_finish, +}; + +/* ----------------------------------------------------------------------------- + * V4L2 Video IOCTLs + */ + +static int mtk_cam_vidioc_querycap(struct file *file, void *fh, + struct v4l2_capability *cap) +{ + struct mtk_cam_dev *cam = video_drvdata(file); + + strscpy(cap->driver, dev_driver_string(cam->dev), sizeof(cap->driver)); + strscpy(cap->card, dev_driver_string(cam->dev), sizeof(cap->card)); + snprintf(cap->bus_info, sizeof(cap->bus_info), "platform:%s", + dev_name(cam->dev)); + + /* Minimum v4l2 api kernel version required by libcamera is 5.0.0 */ + cap->version = KERNEL_VERSION(5, 0, 0); + + return 0; +} + +static int mtk_cam_vidioc_enum_fmt(struct file *file, void *fh, + struct v4l2_fmtdesc *f) +{ + struct mtk_cam_video_device *vdev = file_to_mtk_cam_video_device(file); + const struct mtk_cam_format_info *fmtinfo; + unsigned int i; + + /* If mbus_code is not set enumerate all supported formats. */ + if (!f->mbus_code) { + if (f->index >= vdev->desc->num_fmts) + return -EINVAL; + + /* f->description is filled in v4l_fill_fmtdesc function */ + f->pixelformat = vdev->desc->fmts[f->index]; + f->flags = 0; + + return 0; + } + + /* + * Otherwise only enumerate supported pixel formats corresponding to + * that bus code. + */ + if (f->index) + return -EINVAL; + + fmtinfo = mtk_cam_format_info_by_code(f->mbus_code); + if (!fmtinfo) + return -EINVAL; + + for (i = 0; i < vdev->desc->num_fmts; ++i) { + if (vdev->desc->fmts[i] == fmtinfo->fourcc) { + f->pixelformat = fmtinfo->fourcc; + f->flags = 0; + return 0; + } + } + + return -EINVAL; +} + +static int mtk_cam_vidioc_g_fmt(struct file *file, void *fh, + struct v4l2_format *f) +{ + struct mtk_cam_video_device *vdev = file_to_mtk_cam_video_device(file); + + f->fmt.pix_mp = vdev->format; + + return 0; +} + +static int mtk_cam_vidioc_try_fmt(struct file *file, void *fh, + struct v4l2_format *f) +{ + struct mtk_cam_dev *cam = video_drvdata(file); + struct mtk_cam_video_device *vdev = file_to_mtk_cam_video_device(file); + struct v4l2_pix_format_mplane *pix_mp = &f->fmt.pix_mp; + const struct mtk_cam_format_info *fmtinfo; + + /* Validate pixelformat */ + if (!mtk_cam_dev_find_fmt(vdev->desc, pix_mp->pixelformat)) + pix_mp->pixelformat = vdev->desc->fmts[0]; + + pix_mp->width = clamp_val(pix_mp->width, IMG_MIN_WIDTH, IMG_MAX_WIDTH); + pix_mp->height = clamp_val(pix_mp->height, IMG_MIN_HEIGHT, + IMG_MAX_HEIGHT); + + pix_mp->num_planes = cam->conf->frm_hdr_en ? 2 : 1; + + fmtinfo = mtk_cam_format_info_by_fourcc(pix_mp->pixelformat); + calc_bpl_size_pix_mp(fmtinfo, pix_mp); + + /* Constant format fields */ + pix_mp->colorspace = V4L2_COLORSPACE_SRGB; + pix_mp->field = V4L2_FIELD_NONE; + pix_mp->ycbcr_enc = V4L2_YCBCR_ENC_DEFAULT; + pix_mp->quantization = V4L2_QUANTIZATION_DEFAULT; + pix_mp->xfer_func = V4L2_XFER_FUNC_DEFAULT; + + return 0; +} + +static int mtk_cam_vidioc_s_fmt(struct file *file, void *fh, + struct v4l2_format *f) +{ + struct mtk_cam_dev *cam = video_drvdata(file); + struct mtk_cam_video_device *vdev = file_to_mtk_cam_video_device(file); + int ret; + + if (vb2_is_busy(vdev->vdev.queue)) { + dev_dbg(cam->dev, "%s: queue is busy\n", __func__); + return -EBUSY; + } + + ret = mtk_cam_vidioc_try_fmt(file, fh, f); + if (ret) + return ret; + + /* Configure to video device */ + vdev->format = f->fmt.pix_mp; + vdev->fmtinfo = + mtk_cam_format_info_by_fourcc(f->fmt.pix_mp.pixelformat); + + return 0; +} + +static int mtk_cam_vidioc_enum_framesizes(struct file *file, void *priv, + struct v4l2_frmsizeenum *sizes) +{ + struct mtk_cam_video_device *vdev = file_to_mtk_cam_video_device(file); + + if (sizes->index) + return -EINVAL; + + if (!mtk_cam_dev_find_fmt(vdev->desc, sizes->pixel_format)) + return -EINVAL; + + sizes->type = vdev->desc->frmsizes->type; + memcpy(&sizes->stepwise, &vdev->desc->frmsizes->stepwise, + sizeof(sizes->stepwise)); + + return 0; +} + +static const struct v4l2_ioctl_ops mtk_cam_v4l2_vcap_ioctl_ops = { + .vidioc_querycap = mtk_cam_vidioc_querycap, + .vidioc_enum_framesizes = mtk_cam_vidioc_enum_framesizes, + .vidioc_enum_fmt_vid_cap = mtk_cam_vidioc_enum_fmt, + .vidioc_g_fmt_vid_cap_mplane = mtk_cam_vidioc_g_fmt, + .vidioc_s_fmt_vid_cap_mplane = mtk_cam_vidioc_s_fmt, + .vidioc_try_fmt_vid_cap_mplane = mtk_cam_vidioc_try_fmt, + .vidioc_reqbufs = vb2_ioctl_reqbufs, + .vidioc_create_bufs = vb2_ioctl_create_bufs, + .vidioc_prepare_buf = vb2_ioctl_prepare_buf, + .vidioc_querybuf = vb2_ioctl_querybuf, + .vidioc_qbuf = vb2_ioctl_qbuf, + .vidioc_dqbuf = vb2_ioctl_dqbuf, + .vidioc_streamon = vb2_ioctl_streamon, + .vidioc_streamoff = vb2_ioctl_streamoff, + .vidioc_expbuf = vb2_ioctl_expbuf, + .vidioc_subscribe_event = v4l2_ctrl_subscribe_event, + .vidioc_unsubscribe_event = v4l2_event_unsubscribe, +}; + +static const struct v4l2_file_operations mtk_cam_v4l2_fops = { + .unlocked_ioctl = video_ioctl2, + .open = v4l2_fh_open, + .release = vb2_fop_release, + .poll = vb2_fop_poll, + .mmap = vb2_fop_mmap, +#ifdef CONFIG_COMPAT + .compat_ioctl32 = v4l2_compat_ioctl32, +#endif +}; + +/* ----------------------------------------------------------------------------- + * Init & Cleanup + */ + +static const u32 stream_out_fmts[] = { + /* The 1st entry is the default image format */ + V4L2_PIX_FMT_SBGGR8, + V4L2_PIX_FMT_SGBRG8, + V4L2_PIX_FMT_SGRBG8, + V4L2_PIX_FMT_SRGGB8, + V4L2_PIX_FMT_UYVY, + V4L2_PIX_FMT_VYUY, + V4L2_PIX_FMT_YUYV, + V4L2_PIX_FMT_YVYU, +}; + +static const struct mtk_cam_vdev_desc video_stream = { + .name = "video stream", + .cap = V4L2_CAP_VIDEO_CAPTURE_MPLANE, + .buf_type = V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE, + .link_flags = MEDIA_LNK_FL_IMMUTABLE | MEDIA_LNK_FL_ENABLED, + .fmts = stream_out_fmts, + .num_fmts = ARRAY_SIZE(stream_out_fmts), + .def_width = 1920, + .def_height = 1080, + .ioctl_ops = &mtk_cam_v4l2_vcap_ioctl_ops, + .frmsizes = + &(struct v4l2_frmsizeenum){ + .index = 0, + .type = V4L2_FRMSIZE_TYPE_CONTINUOUS, + .stepwise = { + .max_width = IMG_MAX_WIDTH, + .min_width = IMG_MIN_WIDTH, + .max_height = IMG_MAX_HEIGHT, + .min_height = IMG_MIN_HEIGHT, + .step_height = 1, + .step_width = 1, + }, + }, +}; + +int mtk_cam_video_register(struct mtk_cam_dev *cam) +{ + struct device *dev = cam->dev; + struct mtk_cam_video_device *cam_vdev = &cam->vdev; + struct video_device *vdev = &cam_vdev->vdev; + struct vb2_queue *vbq = &cam_vdev->vbq; + int ret; + + vb2_dma_contig_set_max_seg_size(cam->dev, DMA_BIT_MASK(32)); + + cam_vdev->desc = &video_stream; + + /* Initialize mtk_cam_video_device */ + mtk_cam_dev_load_default_fmt(cam); + + cam->subdev_pads[MTK_CAM_CIO_PAD_VIDEO].flags = MEDIA_PAD_FL_SOURCE; + + /* Initialize media entities */ + ret = media_entity_pads_init(&vdev->entity, 1, &cam_vdev->vdev_pad); + if (ret) { + dev_err(dev, "failed to initialize media pad:%d\n", ret); + return ret; + } + cam_vdev->vdev_pad.flags = MEDIA_PAD_FL_SINK; + + vbq->type = cam_vdev->desc->buf_type; + vbq->io_modes = VB2_MMAP | VB2_DMABUF; + vbq->dev = dev; + vbq->ops = &mtk_cam_vb2_ops; + vbq->mem_ops = &vb2_dma_contig_memops; + vbq->buf_struct_size = sizeof(struct mtk_cam_dev_buffer); + /* + * TODO: The hardware supports SOF interrupts, switch to a SOF + * timestamp source would give better accuracy, but first requires + * extending the V4L2 API to support it. + */ + vbq->timestamp_flags = V4L2_BUF_FLAG_TIMESTAMP_MONOTONIC + | V4L2_BUF_FLAG_TSTAMP_SRC_EOF; + + /* No minimum buffers limitation */ + vbq->min_buffers_needed = 0; + vbq->drv_priv = cam; + + vbq->lock = &cam_vdev->vdev_lock; + ret = vb2_queue_init(vbq); + if (ret) { + dev_err(dev, "failed to init. vb2 queue:%d\n", ret); + goto fail_media_clean; + } + + /* Initialize vdev */ + snprintf(vdev->name, sizeof(vdev->name), "%s %s", + dev_name(dev), cam_vdev->desc->name); + + /* Set cap/type/ioctl_ops of the video device */ + vdev->device_caps = cam_vdev->desc->cap | V4L2_CAP_STREAMING + | V4L2_CAP_IO_MC; + vdev->ioctl_ops = cam_vdev->desc->ioctl_ops; + vdev->fops = &mtk_cam_v4l2_fops; + vdev->release = video_device_release_empty; + vdev->lock = &cam_vdev->vdev_lock; + vdev->v4l2_dev = cam->subdev.v4l2_dev; + vdev->queue = &cam_vdev->vbq; + vdev->vfl_dir = VFL_DIR_RX; + vdev->entity.function = MEDIA_ENT_F_IO_V4L; + vdev->entity.ops = NULL; + video_set_drvdata(vdev, cam); + + /* Initialize miscellaneous variables */ + mutex_init(&cam_vdev->vdev_lock); + INIT_LIST_HEAD(&cam->buf_list); + + ret = video_register_device(vdev, VFL_TYPE_VIDEO, -1); + if (ret) { + dev_err(dev, "failed to register vde:%d\n", ret); + goto fail_vb2_rel; + } + + /* Create link between the video pad and the subdev pad. */ + ret = media_create_pad_link(&cam->subdev.entity, + MTK_CAM_CIO_PAD_VIDEO, + &vdev->entity, 0, cam_vdev->desc->link_flags); + + if (ret) + goto fail_vdev_ureg; + + return 0; + +fail_vdev_ureg: + video_unregister_device(vdev); +fail_vb2_rel: + mutex_destroy(&cam_vdev->vdev_lock); + vb2_queue_release(vbq); +fail_media_clean: + media_entity_cleanup(&vdev->entity); + + return ret; +} + +void mtk_cam_video_unregister(struct mtk_cam_video_device *vdev) +{ + video_unregister_device(&vdev->vdev); + vb2_queue_release(&vdev->vbq); + media_entity_cleanup(&vdev->vdev.entity); + mutex_destroy(&vdev->vdev_lock); + vb2_dma_contig_clear_max_seg_size(&vdev->vdev.dev); +}