From patchwork Tue Nov 21 11:00:00 2023 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Neil Armstrong X-Patchwork-Id: 13462825 Authentication-Results: smtp.subspace.kernel.org; dkim=pass (2048-bit key) header.d=linaro.org header.i=@linaro.org header.b="tv0XEopW" Received: from mail-wr1-x436.google.com (mail-wr1-x436.google.com [IPv6:2a00:1450:4864:20::436]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 6CDE8F4 for ; Tue, 21 Nov 2023 03:00:10 -0800 (PST) Received: by mail-wr1-x436.google.com with SMTP id ffacd0b85a97d-3316d09c645so2511652f8f.0 for ; Tue, 21 Nov 2023 03:00:10 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=linaro.org; s=google; t=1700564409; x=1701169209; darn=vger.kernel.org; h=cc:to:in-reply-to:references:message-id:content-transfer-encoding :mime-version:subject:date:from:from:to:cc:subject:date:message-id :reply-to; bh=WxpSuXDoom2RWs6bn/SJPon0BVz9GrlE7SEKe7RDhZw=; b=tv0XEopWfREjhj9mVQy3xjtMRliBniAfh6trZ9sZCZlrpxYwROZKSd0yLqBfYpc9XO m7cgO2a1MWnwT9lIfJlY6JTQcpAbQ9cUapxgwUV06iNZswdHgm2Bkz7oTqSl/S+I+iHH YBgpSbFCUc6BhkGibB7AQbN9JJCnN6zMtv2O+0J1qIjjg8RKlBDD5kNSctcyF7huuRHk cdQKQFaZYnRcG27Hc1R18KOh52g9qNqa/az3cHS7xZ1Sg84Z/7PMgsCOGmm/MB4J57AW OP3TetSB8obbIQ+CBXzrUreVvFo9ae0AM/TCE6NJDqOMN/hr8tBH0I3sdLfjVlUhrIxz LnVQ== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20230601; t=1700564409; x=1701169209; h=cc:to:in-reply-to:references:message-id:content-transfer-encoding :mime-version:subject:date:from:x-gm-message-state:from:to:cc :subject:date:message-id:reply-to; bh=WxpSuXDoom2RWs6bn/SJPon0BVz9GrlE7SEKe7RDhZw=; b=KPgdjlNI7Okh4cCeykob3e9ksPY/VDxgJ3wiAZFou7p9XBbz6zQAScY5Gcn8MRtuh1 Dm+5n83tzuyppoPQhMKfkM9iDGRhk4iDMj9KWoNCrMgS0xczqoKpNDzxs04Y399y2cQP ES9ODMMJbQZJ5jFTM8xzHxPYIlMnkY0H+NTAUj6Y0oLIH3Lh3aVBR4hopL5xiBGu+M0Y fVe9v4qMd7J8CJ8/ytZdVaFCaYnG1RgRt1aMSxXntKkXQUEbn7FLGiUaSgrQeo3cROWd 6HlczFBqHqZEA5/tLggsWNnelKx9J0cgCHeWon6yvRc79GaZ4Q1h1oAauZVPxKyOfAih z9xQ== X-Gm-Message-State: AOJu0YxtJuG93pnR9kiGsYYe7PXNSQL917014Jx5L9Q/HZGS+Y7cGouV 0tb1iesg7pwj9cWj2kWwjT0f+Q== X-Google-Smtp-Source: AGHT+IE6rx3KaLlnXaMX2kgktmHvy+PCtdK3K6gqwe2qTcwowExI+WZxf5wSCeAq4mnqFP8CV2i37Q== X-Received: by 2002:a5d:5703:0:b0:32f:7f6c:72a6 with SMTP id a3-20020a5d5703000000b0032f7f6c72a6mr4993664wrv.16.1700564408809; Tue, 21 Nov 2023 03:00:08 -0800 (PST) Received: from arrakeen.starnux.net ([2a01:e0a:982:cbb0:8261:5fff:fe11:bdda]) by smtp.gmail.com with ESMTPSA id f1-20020adff581000000b00332c0e934aasm9028500wro.44.2023.11.21.03.00.08 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Tue, 21 Nov 2023 03:00:08 -0800 (PST) From: Neil Armstrong Date: Tue, 21 Nov 2023 12:00:00 +0100 Subject: [PATCH v3 1/8] dt-bindings: arm: qcom: document SM8650 and the reference boards Precedence: bulk X-Mailing-List: linux-arm-msm@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 Message-Id: <20231121-topic-sm8650-upstream-dt-v3-1-db9d0507ffd3@linaro.org> References: <20231121-topic-sm8650-upstream-dt-v3-0-db9d0507ffd3@linaro.org> In-Reply-To: <20231121-topic-sm8650-upstream-dt-v3-0-db9d0507ffd3@linaro.org> To: Andy Gross , Bjorn Andersson , Konrad Dybcio , Rob Herring , Krzysztof Kozlowski , Conor Dooley Cc: linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, Neil Armstrong , Krzysztof Kozlowski X-Mailer: b4 0.12.3 X-Developer-Signature: v=1; a=openpgp-sha256; l=1087; i=neil.armstrong@linaro.org; h=from:subject:message-id; bh=UZ2eQGqqiWNvOpQYnbzT/mou5C8lbL9c01Zc1IvQLo0=; b=owEBbAKT/ZANAwAKAXfc29rIyEnRAcsmYgBlXI2zX1OUMOs6I6alDZxPKmW4LnOlXvPGdVy7JUQX e5PMf1eJAjIEAAEKAB0WIQQ9U8YmyFYF/h30LIt33NvayMhJ0QUCZVyNswAKCRB33NvayMhJ0Z1eD/ d/ASd2RmcDdHfCxZgl49Y9CLN1cIyIrIYOvPVFjPynEe198UDFJC9V+c43r4z7tVhWiZ2UbkGff+YB 2IREs2+Xri5Ndl4r/tu7RW+prd7APQ4BSEo/YB30zEc+/wUvRq3TqN8BsMcSH3iuSfny5O32YUT7FP WsFbrEFdSht9in7YNOiWE9VSPuq/DtpQ8MkyCuIvLhxtAxeczt/kCHq1zJBGwm02hxJ3zzfeZ3czZB 04bmhAObvRbexFto5Y1PsAtqJTacTzVFS8nl5y5bvt2+/+nZcW57NJOiQxtKzIGR+rZiaj/MghynNZ e8TYEivrwAzl7NZnIoxfZfjJw6/qUJyvJJboToE2rL8FKV3jDdNK67TBA2wr4GQsMBZsKwrjscRIG2 buyxzzrE9a84Gt/Vq5eWVowrZTC5DYy0nVuyG/LppJbxbgO2fmxplwnm8Idf2tKA0iBhrfSEY36esw K5xiidYJMzsiJpWG3Npmc8fCNey59Q3oujwen+Xrq/rhef/p5tEzfjhRqJHi9nCALvwfOAMKAJg4cG jSRJ+e6/PNxONKi2QIBlMlwy44CpQyLvrH8BqylUPmGwnQtb7HmMF1NWeQn/eoGMQE/Lrl4NWLNFdd TjirdKxcc5Hv56AIXvgaiXl8UbUpx/+nQjjoRTgJbnlI/z7f6+SjlKzB7Y X-Developer-Key: i=neil.armstrong@linaro.org; a=openpgp; fpr=89EC3D058446217450F22848169AB7B1A4CFF8AE Document the SM8650 SoC and based MTP (Mobile Test Platforms) and QRD (Qualcomm Reference Device) boards. Reviewed-by: Krzysztof Kozlowski Signed-off-by: Neil Armstrong --- Documentation/devicetree/bindings/arm/qcom.yaml | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/Documentation/devicetree/bindings/arm/qcom.yaml b/Documentation/devicetree/bindings/arm/qcom.yaml index 88b84035e7b1..c5b6518973d8 100644 --- a/Documentation/devicetree/bindings/arm/qcom.yaml +++ b/Documentation/devicetree/bindings/arm/qcom.yaml @@ -87,6 +87,7 @@ description: | sm8350 sm8450 sm8550 + sm8650 The 'board' element must be one of the following strings: @@ -1044,6 +1045,12 @@ properties: - qcom,sm8550-qrd - const: qcom,sm8550 + - items: + - enum: + - qcom,sm8650-mtp + - qcom,sm8650-qrd + - const: qcom,sm8650 + # Board compatibles go above qcom,msm-id: From patchwork Tue Nov 21 11:00:01 2023 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Neil Armstrong X-Patchwork-Id: 13462827 Authentication-Results: smtp.subspace.kernel.org; dkim=pass (2048-bit key) header.d=linaro.org header.i=@linaro.org header.b="gChg+TrQ" Received: from mail-wm1-x331.google.com (mail-wm1-x331.google.com [IPv6:2a00:1450:4864:20::331]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id A61E910E for ; Tue, 21 Nov 2023 03:00:11 -0800 (PST) Received: by mail-wm1-x331.google.com with SMTP id 5b1f17b1804b1-40b27726369so5245355e9.0 for ; Tue, 21 Nov 2023 03:00:11 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=linaro.org; s=google; t=1700564410; x=1701169210; darn=vger.kernel.org; h=cc:to:in-reply-to:references:message-id:content-transfer-encoding :mime-version:subject:date:from:from:to:cc:subject:date:message-id :reply-to; bh=14+bQCKHvmnzzJrSIQe+G0K0kmg/QKlCNQGELO83fIw=; b=gChg+TrQ+4ZCiRZC4FQ/HKgqRRmHjdEWOWuZCAjbru8++1tjtuPnr8xb5CATbjBkPN yBt3u3OW+25lhjQjhnY90dMdbbX9dlj0ZHhh7Jb3C7rmypGr5OK3KsYKBTQHZa1fEQpx n4wp8oIbCQqRB0wT69OipAba/i7xER53jTcjvJxIm3ziDc4Jn6JZ0o4G45alhmLzm4cT reJFy22+nR4L791hcyyaEAGzfgg1Eg4cXL99JLIMwY9/igKAkDXw4am+ks4FySmQMUCA InshD6z5LUQwgebdwLrWAzneaokUCTYegDkYBRlsWAsvtKI6WvgPxZCdr9yOqiZkC++B 3YKg== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20230601; t=1700564410; x=1701169210; h=cc:to:in-reply-to:references:message-id:content-transfer-encoding :mime-version:subject:date:from:x-gm-message-state:from:to:cc :subject:date:message-id:reply-to; bh=14+bQCKHvmnzzJrSIQe+G0K0kmg/QKlCNQGELO83fIw=; b=nZdChDvnVJuZWK9TsDGFACbi629o30UYhtgHYxKWmcCtyHXKxU0y3Bdnxlva8SrYq4 +6LONHGQKueaa67n/TI9J2CZUQGKVfWjPvxftrAKH81cH3Wp6KchusnTWWUYgOkq349a k8807fbx6lRvsglNcHQ+37orx6P1GnZp9YL2KBLfL5Uz1kxCgMTrwHKqEL9UMuhtvu+l C8eK1AftDrBnxr1SNr6v/edMix54DD2009aijUkz3w3B9UVQ5eeFokkP8dSTs6cmeeI+ mqwGDyuxTOQOso7mY/DQBDMbgkuKhibOXUQhJYgKiGzanEj+OzFYfiyjNisQfEbpPrG+ wXiw== X-Gm-Message-State: AOJu0Yzdj5GuaOgE4adi5a7RrsQMR30fDS3Sqnb7FKpQSBqN8nwOnFs7 1+CFGmxN2su37EGFO9XaqDzyEQ== X-Google-Smtp-Source: AGHT+IFp1CSbhcg+nZO0cK2ughoGBgJ+/Gj9HukJISzPGIFgVo7D69U/LwpgQGwKcgnKYBzsHL2zqA== X-Received: by 2002:a05:600c:1386:b0:3fe:ba7:f200 with SMTP id u6-20020a05600c138600b003fe0ba7f200mr8177839wmf.20.1700564409815; Tue, 21 Nov 2023 03:00:09 -0800 (PST) Received: from arrakeen.starnux.net ([2a01:e0a:982:cbb0:8261:5fff:fe11:bdda]) by smtp.gmail.com with ESMTPSA id f1-20020adff581000000b00332c0e934aasm9028500wro.44.2023.11.21.03.00.08 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Tue, 21 Nov 2023 03:00:09 -0800 (PST) From: Neil Armstrong Date: Tue, 21 Nov 2023 12:00:01 +0100 Subject: [PATCH v3 2/8] arm64: dts: qcom: add initial SM8650 dtsi Precedence: bulk X-Mailing-List: linux-arm-msm@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 Message-Id: <20231121-topic-sm8650-upstream-dt-v3-2-db9d0507ffd3@linaro.org> References: <20231121-topic-sm8650-upstream-dt-v3-0-db9d0507ffd3@linaro.org> In-Reply-To: <20231121-topic-sm8650-upstream-dt-v3-0-db9d0507ffd3@linaro.org> To: Andy Gross , Bjorn Andersson , Konrad Dybcio , Rob Herring , Krzysztof Kozlowski , Conor Dooley Cc: linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, Neil Armstrong X-Mailer: b4 0.12.3 X-Developer-Signature: v=1; a=openpgp-sha256; l=55653; i=neil.armstrong@linaro.org; h=from:subject:message-id; bh=dd4ZlXLuTruN9cz+4k+0ih17NRuJUbrq79L1RnQU4zI=; b=owEBbAKT/ZANAwAKAXfc29rIyEnRAcsmYgBlXI2zPmPayF5yQx72yu5MIZvx8q1NkEYZdz3wR/Q3 819iiD6JAjIEAAEKAB0WIQQ9U8YmyFYF/h30LIt33NvayMhJ0QUCZVyNswAKCRB33NvayMhJ0ULxD/ jMEtYLq0LQhig5KvZCLIDUJJq9JIrqv6WIXe8AzP0wGUxEUeq0qU2w84nWBHMjNAxZNFkycckCCYD+ j7C9lmFCe+vcAh0o864roH5hBl/BQtlMlZxt+qnXjKYlzYn9LU4HR41YLnaa7x+TSb2mT5TodlFMIo k9DqXQS1uu+BAKZyCxC58B2d9tZWW3p6t8F7p6sWY/bVB1lxgL1+vEQHEtE6kXP5uw+fulaycmOlaz 0CCf3lhRqx4LD5aUckjh7lcz7jpnB9bNUi++q2jW09tMVoINyQglhp/5OK/eC8BVZDmICgbUtJcszc hE435BuaHRS5k7V0S3W3G+6J6rTdfyS5qnhSB99d+1o4JwuDzWgBLr+9AXMB3/pyOhwoCTw91yCBKq 7pC88+G6ff3BrISHL8oT1bgY2tU/M1sz5KHD2ArbzJK7iyzcLqhxR+Oinm2+/4Ukkj2xTLzPPW4JZi XhvWGZyBtwCjPzJi/m8EVmtV9DThECSKnXTPGGo/gH4X4Wxoy8jWWqkhY0DQdr1TBmbarMOxMf7Bpn Rulm2GoA7Y9UlW2Xc7CVxw3mTAUY8ZlXZmPbwZJJ2XYHX1veh+dABYx/e+I5iLD7GQwc99aWaj/6Gn AZUgqtBMn6XT5eQaSq3qE2tJXjeLWLgPe4TcSXK25xNUmzEgAAQvd8rz4i X-Developer-Key: i=neil.armstrong@linaro.org; a=openpgp; fpr=89EC3D058446217450F22848169AB7B1A4CFF8AE Add initial DTSI for the Qualcomm SM8650 platform, only contains nodes which doesn't depend on interconnect. Signed-off-by: Neil Armstrong Reviewed-by: Konrad Dybcio --- arch/arm64/boot/dts/qcom/sm8650.dtsi | 2437 ++++++++++++++++++++++++++++++++++ 1 file changed, 2437 insertions(+) diff --git a/arch/arm64/boot/dts/qcom/sm8650.dtsi b/arch/arm64/boot/dts/qcom/sm8650.dtsi new file mode 100644 index 000000000000..e6a862230c30 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sm8650.dtsi @@ -0,0 +1,2437 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2023, Linaro Limited + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +/ { + interrupt-parent = <&intc>; + + #address-cells = <2>; + #size-cells = <2>; + + chosen { }; + + clocks { + xo_board: xo-board { + compatible = "fixed-clock"; + #clock-cells = <0>; + }; + + sleep_clk: sleep-clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + }; + + bi_tcxo_div2: bi-tcxo-div2-clk { + compatible = "fixed-factor-clock"; + #clock-cells = <0>; + + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-mult = <1>; + clock-div = <2>; + }; + + bi_tcxo_ao_div2: bi-tcxo-ao-div2-clk { + compatible = "fixed-factor-clock"; + #clock-cells = <0>; + + clocks = <&rpmhcc RPMH_CXO_CLK_A>; + clock-mult = <1>; + clock-div = <2>; + }; + }; + + cpus { + #address-cells = <2>; + #size-cells = <0>; + + CPU0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a520"; + reg = <0 0>; + + clocks = <&cpufreq_hw 0>; + + power-domains = <&CPU_PD0>; + power-domain-names = "psci"; + + enable-method = "psci"; + next-level-cache = <&L2_0>; + capacity-dmips-mhz = <1024>; + dynamic-power-coefficient = <100>; + + qcom,freq-domain = <&cpufreq_hw 0>; + + #cooling-cells = <2>; + + L2_0: l2-cache { + compatible = "cache"; + cache-level = <2>; + cache-unified; + next-level-cache = <&L3_0>; + + L3_0: l3-cache { + compatible = "cache"; + cache-level = <3>; + cache-unified; + }; + }; + }; + + CPU1: cpu@100 { + device_type = "cpu"; + compatible = "arm,cortex-a520"; + reg = <0 0x100>; + + clocks = <&cpufreq_hw 0>; + + power-domains = <&CPU_PD1>; + power-domain-names = "psci"; + + enable-method = "psci"; + next-level-cache = <&L2_0>; + capacity-dmips-mhz = <1024>; + dynamic-power-coefficient = <100>; + + qcom,freq-domain = <&cpufreq_hw 0>; + + #cooling-cells = <2>; + }; + + CPU2: cpu@200 { + device_type = "cpu"; + compatible = "arm,cortex-a720"; + reg = <0 0x200>; + + clocks = <&cpufreq_hw 3>; + + power-domains = <&CPU_PD2>; + power-domain-names = "psci"; + + enable-method = "psci"; + next-level-cache = <&L2_200>; + capacity-dmips-mhz = <1792>; + dynamic-power-coefficient = <238>; + + qcom,freq-domain = <&cpufreq_hw 3>; + + #cooling-cells = <2>; + + L2_200: l2-cache { + compatible = "cache"; + cache-level = <2>; + cache-unified; + next-level-cache = <&L3_0>; + }; + }; + + CPU3: cpu@300 { + device_type = "cpu"; + compatible = "arm,cortex-a720"; + reg = <0 0x300>; + + clocks = <&cpufreq_hw 3>; + + power-domains = <&CPU_PD3>; + power-domain-names = "psci"; + + enable-method = "psci"; + next-level-cache = <&L2_200>; + capacity-dmips-mhz = <1792>; + dynamic-power-coefficient = <238>; + + qcom,freq-domain = <&cpufreq_hw 3>; + + #cooling-cells = <2>; + }; + + CPU4: cpu@400 { + device_type = "cpu"; + compatible = "arm,cortex-a720"; + reg = <0 0x400>; + + clocks = <&cpufreq_hw 3>; + + power-domains = <&CPU_PD4>; + power-domain-names = "psci"; + + enable-method = "psci"; + next-level-cache = <&L2_400>; + capacity-dmips-mhz = <1792>; + dynamic-power-coefficient = <238>; + + qcom,freq-domain = <&cpufreq_hw 3>; + + #cooling-cells = <2>; + + L2_400: l2-cache { + compatible = "cache"; + cache-level = <2>; + cache-unified; + next-level-cache = <&L3_0>; + }; + }; + + CPU5: cpu@500 { + device_type = "cpu"; + compatible = "arm,cortex-a720"; + reg = <0 0x500>; + + clocks = <&cpufreq_hw 1>; + + power-domains = <&CPU_PD5>; + power-domain-names = "psci"; + + enable-method = "psci"; + next-level-cache = <&L2_500>; + capacity-dmips-mhz = <1792>; + dynamic-power-coefficient = <238>; + + qcom,freq-domain = <&cpufreq_hw 1>; + + #cooling-cells = <2>; + + L2_500: l2-cache { + compatible = "cache"; + cache-level = <2>; + cache-unified; + next-level-cache = <&L3_0>; + }; + }; + + CPU6: cpu@600 { + device_type = "cpu"; + compatible = "arm,cortex-a720"; + reg = <0 0x600>; + + clocks = <&cpufreq_hw 1>; + + power-domains = <&CPU_PD6>; + power-domain-names = "psci"; + + enable-method = "psci"; + next-level-cache = <&L2_600>; + capacity-dmips-mhz = <1792>; + dynamic-power-coefficient = <238>; + + qcom,freq-domain = <&cpufreq_hw 1>; + + #cooling-cells = <2>; + + L2_600: l2-cache { + compatible = "cache"; + cache-level = <2>; + cache-unified; + next-level-cache = <&L3_0>; + }; + }; + + CPU7: cpu@700 { + device_type = "cpu"; + compatible = "arm,cortex-x4"; + reg = <0 0x700>; + + clocks = <&cpufreq_hw 2>; + + power-domains = <&CPU_PD7>; + power-domain-names = "psci"; + + enable-method = "psci"; + next-level-cache = <&L2_700>; + capacity-dmips-mhz = <1894>; + dynamic-power-coefficient = <588>; + + qcom,freq-domain = <&cpufreq_hw 2>; + + #cooling-cells = <2>; + + L2_700: l2-cache { + compatible = "cache"; + cache-level = <2>; + cache-unified; + next-level-cache = <&L3_0>; + }; + }; + + cpu-map { + cluster0 { + core0 { + cpu = <&CPU0>; + }; + + core1 { + cpu = <&CPU1>; + }; + + core2 { + cpu = <&CPU2>; + }; + + core3 { + cpu = <&CPU3>; + }; + + core4 { + cpu = <&CPU4>; + }; + + core5 { + cpu = <&CPU5>; + }; + + core6 { + cpu = <&CPU6>; + }; + + core7 { + cpu = <&CPU7>; + }; + }; + }; + + idle-states { + entry-method = "psci"; + + SILVER_CPU_SLEEP_0: cpu-sleep-0-0 { + compatible = "arm,idle-state"; + idle-state-name = "silver-rail-power-collapse"; + arm,psci-suspend-param = <0x40000004>; + entry-latency-us = <550>; + exit-latency-us = <750>; + min-residency-us = <6700>; + local-timer-stop; + }; + + GOLD_CPU_SLEEP_0: cpu-sleep-1-0 { + compatible = "arm,idle-state"; + idle-state-name = "gold-rail-power-collapse"; + arm,psci-suspend-param = <0x40000004>; + entry-latency-us = <600>; + exit-latency-us = <1300>; + min-residency-us = <8136>; + local-timer-stop; + }; + + GOLD_PLUS_CPU_SLEEP_0: cpu-sleep-2-0 { + compatible = "arm,idle-state"; + idle-state-name = "gold-plus-rail-power-collapse"; + arm,psci-suspend-param = <0x40000004>; + entry-latency-us = <500>; + exit-latency-us = <1350>; + min-residency-us = <7480>; + local-timer-stop; + }; + }; + + domain-idle-states { + CLUSTER_SLEEP_0: cluster-sleep-0 { + compatible = "domain-idle-state"; + arm,psci-suspend-param = <0x41000044>; + entry-latency-us = <750>; + exit-latency-us = <2350>; + min-residency-us = <9144>; + }; + + CLUSTER_SLEEP_1: cluster-sleep-1 { + compatible = "domain-idle-state"; + arm,psci-suspend-param = <0x4100c344>; + entry-latency-us = <2800>; + exit-latency-us = <4400>; + min-residency-us = <10150>; + }; + }; + }; + + firmware { + scm: scm { + compatible = "qcom,scm-sm8650", "qcom,scm"; + }; + }; + + memory@a0000000 { + device_type = "memory"; + /* We expect the bootloader to fill in the size */ + reg = <0 0xa0000000 0 0>; + }; + + pmu { + compatible = "arm,armv8-pmuv3"; + interrupts = ; + }; + + psci { + compatible = "arm,psci-1.0"; + method = "smc"; + + CPU_PD0: power-domain-cpu0 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&SILVER_CPU_SLEEP_0>; + }; + + CPU_PD1: power-domain-cpu1 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&SILVER_CPU_SLEEP_0>; + }; + + CPU_PD2: power-domain-cpu2 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&SILVER_CPU_SLEEP_0>; + }; + + CPU_PD3: power-domain-cpu3 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&GOLD_CPU_SLEEP_0>; + }; + + CPU_PD4: power-domain-cpu4 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&GOLD_CPU_SLEEP_0>; + }; + + CPU_PD5: power-domain-cpu5 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&GOLD_CPU_SLEEP_0>; + }; + + CPU_PD6: power-domain-cpu6 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&GOLD_CPU_SLEEP_0>; + }; + + CPU_PD7: power-domain-cpu7 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&GOLD_PLUS_CPU_SLEEP_0>; + }; + + CLUSTER_PD: power-domain-cluster { + #power-domain-cells = <0>; + domain-idle-states = <&CLUSTER_SLEEP_0>, + <&CLUSTER_SLEEP_1>; + }; + }; + + reserved_memory: reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + hyp_mem: hyp@80000000 { + reg = <0 0x80000000 0 0xe00000>; + no-map; + }; + + cpusys_vm_mem: cpusys-vm@80e00000 { + reg = <0 0x80e00000 0 0x400000>; + no-map; + }; + + /* Merged xbl_dtlog, xbl_ramdump and aop_image regions */ + xbl_dt_log_merged_mem: xbl-dt-log-merged@81a00000 { + reg = <0 0x81a00000 0 0x260000>; + no-map; + }; + + aop_cmd_db_mem: aop-cmd-db@81c60000 { + compatible = "qcom,cmd-db"; + reg = <0 0x81c60000 0 0x20000>; + no-map; + }; + + /* Merged aop_config, tme_crash_dump, tme_log and uefi_log regions */ + aop_tme_uefi_merged_mem: aop-tme-uefi-merged@81c80000 { + reg = <0 0x81c80000 0 0x74000>; + no-map; + }; + + /* Secdata region can be reused by apps */ + + smem: smem@81d00000 { + compatible = "qcom,smem"; + reg = <0 0x81d00000 0 0x200000>; + hwlocks = <&tcsr_mutex 3>; + no-map; + }; + + adsp_mhi_mem: adsp-mhi@81f00000 { + reg = <0 0x81f00000 0 0x20000>; + no-map; + }; + + pvmfw_mem: pvmfw@824a0000 { + reg = <0 0x824a0000 0 0x100000>; + no-map; + }; + + global_sync_mem: global-sync@82600000 { + reg = <0 0x82600000 0 0x100000>; + no-map; + }; + + tz_stat_mem: tz-stat@82700000 { + reg = <0 0x82700000 0 0x100000>; + no-map; + }; + + qdss_mem: qdss@82800000 { + reg = <0 0x82800000 0 0x2000000>; + no-map; + }; + + mpss_dsm_mem: mpss-dsm@86b00000 { + reg = <0 0x86b00000 0 0x4900000>; + no-map; + }; + + mpss_dsm_mem_2: mpss-dsm-2@8b400000 { + reg = <0 0x8b400000 0 0x800000>; + no-map; + }; + + mpss_mem: mpss@8bc00000 { + reg = <0 0x8bc00000 0 0xf400000>; + no-map; + }; + + q6_mpss_dtb_mem: q6-mpss-dtb@9b000000 { + reg = <0 0x9b000000 0 0x80000>; + no-map; + }; + + ipa_fw_mem: ipa-fw@9b080000 { + reg = <0 0x9b080000 0 0x10000>; + no-map; + }; + + ipa_gsi_mem: ipa-gsi@9b090000 { + reg = <0 0x9b090000 0 0xa000>; + no-map; + }; + + gpu_micro_code_mem: gpu-micro-code@9b09a000 { + reg = <0 0x9b09a000 0 0x2000>; + no-map; + }; + + spss_region_mem: spss@9b0a0000 { + reg = <0 0x9b0a0000 0 0x1e0000>; + no-map; + }; + + /* First part of the "SPU secure shared memory" region */ + spu_tz_shared_mem: spu-tz-shared@9b280000 { + reg = <0 0x9b280000 0 0x60000>; + no-map; + }; + + /* Second part of the "SPU secure shared memory" region */ + spu_modem_shared_mem: spu-modem-shared@9b2e0000 { + reg = <0 0x9b2e0000 0 0x20000>; + no-map; + }; + + camera_mem: camera@9b300000 { + reg = <0 0x9b300000 0 0x800000>; + no-map; + }; + + video_mem: video@9bb00000 { + reg = <0 0x9bb00000 0 0x800000>; + no-map; + }; + + cvp_mem: cvp@9c300000 { + reg = <0 0x9c300000 0 0x700000>; + no-map; + }; + + cdsp_mem: cdsp@9ca00000 { + reg = <0 0x9ca00000 0 0x1400000>; + no-map; + }; + + q6_cdsp_dtb_mem: q6-cdsp-dtb@9de00000 { + reg = <0 0x9de00000 0 0x80000>; + no-map; + }; + + q6_adsp_dtb_mem: q6-adsp-dtb@9de80000 { + reg = <0 0x9de80000 0 0x80000>; + no-map; + }; + + adspslpi_mem: adspslpi@9df00000 { + reg = <0 0x9df00000 0 0x4080000>; + no-map; + }; + + rmtfs_mem: rmtfs@d7c00000 { + compatible = "qcom,rmtfs-mem"; + reg = <0 0xd7c00000 0 0x400000>; + no-map; + + qcom,client-id = <1>; + qcom,vmid = ; + }; + + /* Merged tz_reserved, xbl_sc, cpucp_fw and qtee regions */ + tz_merged_mem: tz-merged@d8000000 { + reg = <0 0xd8000000 0 0x800000>; + no-map; + }; + + hwfence_shbuf: hwfence-shbuf@e6440000 { + reg = <0 0xe6440000 0 0x2dd000>; + no-map; + }; + + trust_ui_vm_mem: trust-ui-vm@f3800000 { + reg = <0 0xf3800000 0 0x4400000>; + no-map; + }; + + oem_vm_mem: oem-vm@f7c00000 { + reg = <0 0xf7c00000 0 0x4c00000>; + no-map; + }; + + llcc_lpi_mem: llcc-lpi@ff800000 { + reg = <0 0xff800000 0 0x600000>; + no-map; + }; + }; + + soc: soc@0 { + compatible = "simple-bus"; + + #address-cells = <2>; + #size-cells = <2>; + dma-ranges = <0 0 0 0 0x10 0>; + ranges = <0 0 0 0 0x10 0>; + + gcc: clock-controller@100000 { + compatible = "qcom,sm8650-gcc"; + reg = <0 0x00100000 0 0x1f4200>; + + clocks = <&bi_tcxo_div2>, + <&bi_tcxo_ao_div2>, + <&sleep_clk>, + <0>, + <0>, + <0>, + <0>, + <0>, + <0>, + <0>; + + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + }; + + ipcc: mailbox@406000 { + compatible = "qcom,sm8650-ipcc", "qcom,ipcc"; + reg = <0 0x00406000 0 0x1000>; + + interrupts = ; + interrupt-controller; + #interrupt-cells = <3>; + + #mbox-cells = <2>; + }; + + gpi_dma2: dma-controller@800000 { + compatible = "qcom,sm8650-gpi-dma", "qcom,sm6350-gpi-dma"; + reg = <0 0x00800000 0 0x60000>; + + interrupts = , + , + , + , + , + , + , + , + , + , + , + ; + + dma-channels = <12>; + dma-channel-mask = <0x3f>; + #dma-cells = <3>; + + iommus = <&apps_smmu 0x436 0>; + + dma-coherent; + + status = "disabled"; + }; + + qupv3_id_1: geniqup@8c0000 { + compatible = "qcom,geni-se-qup"; + reg = <0 0x008c0000 0 0x2000>; + + clocks = <&gcc GCC_QUPV3_WRAP_2_M_AHB_CLK>, + <&gcc GCC_QUPV3_WRAP_2_S_AHB_CLK>; + clock-names = "m-ahb", + "s-ahb"; + + iommus = <&apps_smmu 0x423 0>; + + dma-coherent; + + #address-cells = <2>; + #size-cells = <2>; + ranges; + + status = "disabled"; + + uart15: serial@89c000 { + compatible = "qcom,geni-debug-uart"; + reg = <0 0x0089c000 0 0x4000>; + + interrupts = ; + + clocks = <&gcc GCC_QUPV3_WRAP2_S7_CLK>; + clock-names = "se"; + + pinctrl-0 = <&qup_uart15_default>; + pinctrl-names = "default"; + + status = "disabled"; + }; + }; + + gpi_dma1: dma-controller@a00000 { + compatible = "qcom,sm8650-gpi-dma", "qcom,sm6350-gpi-dma"; + reg = <0 0x00a00000 0 0x60000>; + + interrupts = , + , + , + , + , + , + , + , + , + , + , + ; + + dma-channels = <12>; + dma-channel-mask = <0xc>; + #dma-cells = <3>; + + iommus = <&apps_smmu 0xb6 0>; + dma-coherent; + + status = "disabled"; + }; + + rng: rng@10c3000 { + compatible = "qcom,sm8650-trng", "qcom,trng"; + reg = <0 0x010c3000 0 0x1000>; + }; + + ice: crypto@1d88000 { + compatible = "qcom,sm8650-inline-crypto-engine", + "qcom,inline-crypto-engine"; + reg = <0 0x01d88000 0 0x8000>; + + clocks = <&gcc GCC_UFS_PHY_ICE_CORE_CLK>; + }; + + tcsr_mutex: hwlock@1f40000 { + compatible = "qcom,tcsr-mutex"; + reg = <0 0x01f40000 0 0x20000>; + + #hwlock-cells = <1>; + }; + + tcsr: clock-controller@1fc0000 { + compatible = "qcom,sm8650-tcsr", "syscon"; + reg = <0 0x01fc0000 0 0xa0000>; + + clocks = <&rpmhcc RPMH_CXO_CLK>; + + #clock-cells = <1>; + #reset-cells = <1>; + }; + + gpucc: clock-controller@3d90000 { + compatible = "qcom,sm8650-gpucc"; + reg = <0 0x03d90000 0 0xa000>; + + clocks = <&bi_tcxo_div2>, + <&gcc GCC_GPU_GPLL0_CLK_SRC>, + <&gcc GCC_GPU_GPLL0_DIV_CLK_SRC>; + + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + }; + + dispcc: clock-controller@af00000 { + compatible = "qcom,sm8650-dispcc"; + reg = <0 0x0af00000 0 0x20000>; + + clocks = <&bi_tcxo_div2>, + <&bi_tcxo_ao_div2>, + <&gcc GCC_DISP_AHB_CLK>, + <&sleep_clk>, + <0>, /* dsi0 */ + <0>, + <0>, /* dsi1 */ + <0>, + <0>, /* dp0 */ + <0>, + <0>, /* dp1 */ + <0>, + <0>, /* dp2 */ + <0>, + <0>, /* dp3 */ + <0>; + + power-domains = <&rpmhpd RPMHPD_MMCX>; + required-opps = <&rpmhpd_opp_low_svs>; + + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + + status = "disabled"; + }; + + usb_1_hsphy: phy@88e3000 { + compatible = "qcom,sm8650-snps-eusb2-phy", + "qcom,sm8550-snps-eusb2-phy"; + reg = <0 0x088e3000 0 0x154>; + + clocks = <&tcsr TCSR_USB2_CLKREF_EN>; + clock-names = "ref"; + + resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>; + + #phy-cells = <0>; + + status = "disabled"; + }; + + usb_dp_qmpphy: phy@88e8000 { + compatible = "qcom,sm8650-qmp-usb3-dp-phy"; + reg = <0 0x088e8000 0 0x3000>; + + clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>, + <&rpmhcc RPMH_CXO_CLK>, + <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>, + <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>; + clock-names = "aux", + "ref", + "com_aux", + "usb3_pipe"; + + resets = <&gcc GCC_USB3_PHY_PRIM_BCR>, + <&gcc GCC_USB3_DP_PHY_PRIM_BCR>; + reset-names = "phy", + "common"; + + power-domains = <&gcc USB3_PHY_GDSC>; + + #clock-cells = <1>; + #phy-cells = <1>; + + status = "disabled"; + }; + + usb_1: usb@a6f8800 { + compatible = "qcom,sm8650-dwc3", "qcom,dwc3"; + reg = <0 0x0a6f8800 0 0x400>; + + interrupts-extended = <&intc GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>, + <&pdc 17 IRQ_TYPE_LEVEL_HIGH>, + <&pdc 15 IRQ_TYPE_EDGE_RISING>, + <&pdc 14 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "hs_phy_irq", + "ss_phy_irq", + "dm_hs_phy_irq", + "dp_hs_phy_irq"; + + clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>, + <&gcc GCC_USB30_PRIM_MASTER_CLK>, + <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>, + <&gcc GCC_USB30_PRIM_SLEEP_CLK>, + <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>, + <&tcsr TCSR_USB3_CLKREF_EN>; + clock-names = "cfg_noc", + "core", + "iface", + "sleep", + "mock_utmi", + "xo"; + + assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>, + <&gcc GCC_USB30_PRIM_MASTER_CLK>; + assigned-clock-rates = <19200000>, <200000000>; + + resets = <&gcc GCC_USB30_PRIM_BCR>; + + power-domains = <&gcc USB30_PRIM_GDSC>; + required-opps = <&rpmhpd_opp_nom>; + + #address-cells = <2>; + #size-cells = <2>; + ranges; + + status = "disabled"; + + usb_1_dwc3: usb@a600000 { + compatible = "snps,dwc3"; + reg = <0 0x0a600000 0 0xcd00>; + + interrupts = ; + + iommus = <&apps_smmu 0x40 0>; + + phys = <&usb_1_hsphy>, + <&usb_dp_qmpphy QMP_USB43DP_USB3_PHY>; + phy-names = "usb2-phy", + "usb3-phy"; + + snps,hird-threshold = /bits/ 8 <0x0>; + snps,usb2-gadget-lpm-disable; + snps,dis_u2_susphy_quirk; + snps,dis_enblslpm_quirk; + snps,dis-u1-entry-quirk; + snps,dis-u2-entry-quirk; + snps,is-utmi-l1-suspend; + snps,usb3_lpm_capable; + snps,usb2-lpm-disable; + snps,has-lpm-erratum; + tx-fifo-resize; + + dma-coherent; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + usb_1_dwc3_hs: endpoint { + }; + }; + + port@1 { + reg = <1>; + + usb_1_dwc3_ss: endpoint { + }; + }; + }; + }; + }; + + pdc: interrupt-controller@b220000 { + compatible = "qcom,sm8650-pdc", "qcom,pdc"; + reg = <0 0x0b220000 0 0x30000>, <0 0x174000f0 0 0x64>; + + interrupt-parent = <&intc>; + + qcom,pdc-ranges = <0 480 94>, <94 609 31>, + <125 63 1>, <126 716 12>, + <138 251 5>, <143 244 4>; + + #interrupt-cells = <2>; + interrupt-controller; + }; + + tsens0: thermal-sensor@c228000 { + compatible = "qcom,sm8650-tsens", "qcom,tsens-v2"; + reg = <0 0x0c228000 0 0x1000>, /* TM */ + <0 0x0c222000 0 0x1000>; /* SROT */ + + interrupts = , + ; + interrupt-names = "uplow", + "critical"; + + #qcom,sensors = <15>; + + #thermal-sensor-cells = <1>; + }; + + tsens1: thermal-sensor@c229000 { + compatible = "qcom,sm8650-tsens", "qcom,tsens-v2"; + reg = <0 0x0c229000 0 0x1000>, /* TM */ + <0 0x0c223000 0 0x1000>; /* SROT */ + + interrupts = , + ; + interrupt-names = "uplow", + "critical"; + + #qcom,sensors = <16>; + + #thermal-sensor-cells = <1>; + }; + + tsens2: thermal-sensor@c22a000 { + compatible = "qcom,sm8650-tsens", "qcom,tsens-v2"; + reg = <0 0x0c22a000 0 0x1000>, /* TM */ + <0 0x0c224000 0 0x1000>; /* SROT */ + + interrupts = , + ; + interrupt-names = "uplow", + "critical"; + + #qcom,sensors = <13>; + + #thermal-sensor-cells = <1>; + }; + + aoss_qmp: power-management@c300000 { + compatible = "qcom,sm8650-aoss-qmp", "qcom,aoss-qmp"; + reg = <0 0x0c300000 0 0x400>; + + interrupt-parent = <&ipcc>; + interrupts-extended = <&ipcc IPCC_CLIENT_AOP IPCC_MPROC_SIGNAL_GLINK_QMP + IRQ_TYPE_EDGE_RISING>; + + mboxes = <&ipcc IPCC_CLIENT_AOP IPCC_MPROC_SIGNAL_GLINK_QMP>; + + #clock-cells = <0>; + }; + + sram@c3f0000 { + compatible = "qcom,rpmh-stats"; + reg = <0 0x0c3f0000 0 0x400>; + }; + + spmi_bus: spmi@c400000 { + compatible = "qcom,spmi-pmic-arb"; + reg = <0 0x0c400000 0 0x3000>, + <0 0x0c500000 0 0x4000000>, + <0 0x0c440000 0 0x80000>, + <0 0x0c4c0000 0 0x20000>, + <0 0x0c42d000 0 0x4000>; + reg-names = "core", + "chnls", + "obsrvr", + "intr", + "cnfg"; + + interrupts-extended = <&pdc 1 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "periph_irq"; + + qcom,ee = <0>; + qcom,channel = <0>; + qcom,bus-id = <0>; + + interrupt-controller; + #interrupt-cells = <4>; + + #address-cells = <2>; + #size-cells = <0>; + }; + + tlmm: pinctrl@f100000 { + compatible = "qcom,sm8650-tlmm"; + reg = <0 0x0f100000 0 0x300000>; + + interrupts = ; + + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + + gpio-ranges = <&tlmm 0 0 211>; + + wakeup-parent = <&pdc>; + + qup_uart15_default: qup-uart15-default-state { + /* TX, RX */ + pins = "gpio30", "gpio31"; + function = "qup2_se7"; + drive-strength = <2>; + bias-disable; + }; + }; + + apps_smmu: iommu@15000000 { + compatible = "qcom,sm8650-smmu-500", "qcom,smmu-500", "arm,mmu-500"; + reg = <0 0x15000000 0 0x100000>; + + interrupts = , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + ; + + #iommu-cells = <2>; + #global-interrupts = <1>; + + dma-coherent; + }; + + intc: interrupt-controller@17100000 { + compatible = "arm,gic-v3"; + reg = <0 0x17100000 0 0x10000>, /* GICD */ + <0 0x17180000 0 0x200000>; /* GICR * 8 */ + + interrupts = ; + + #interrupt-cells = <3>; + interrupt-controller; + + #redistributor-regions = <1>; + redistributor-stride = <0 0x40000>; + + #address-cells = <2>; + #size-cells = <2>; + ranges; + + gic_its: msi-controller@17140000 { + compatible = "arm,gic-v3-its"; + reg = <0 0x17140000 0 0x20000>; + + msi-controller; + #msi-cells = <1>; + }; + }; + + timer@17420000 { + compatible = "arm,armv7-timer-mem"; + reg = <0 0x17420000 0 0x1000>; + + ranges = <0 0 0 0x20000000>; + #address-cells = <1>; + #size-cells = <1>; + + frame@17421000 { + reg = <0x17421000 0x1000>, + <0x17422000 0x1000>; + + interrupts = , + ; + + frame-number = <0>; + }; + + frame@17423000 { + reg = <0x17423000 0x1000>; + + interrupts = ; + + frame-number = <1>; + + status = "disabled"; + }; + + frame@17425000 { + reg = <0x17425000 0x1000>; + + interrupts = ; + + frame-number = <2>; + + status = "disabled"; + }; + + frame@17427000 { + reg = <0x17427000 0x1000>; + + interrupts = ; + + frame-number = <3>; + + status = "disabled"; + }; + + frame@17429000 { + reg = <0x17429000 0x1000>; + + interrupts = ; + + frame-number = <4>; + + status = "disabled"; + }; + + frame@1742b000 { + reg = <0x1742b000 0x1000>; + + interrupts = ; + + frame-number = <5>; + + status = "disabled"; + }; + + frame@1742d000 { + reg = <0x1742d000 0x1000>; + + interrupts = ; + + frame-number = <6>; + + status = "disabled"; + }; + }; + + apps_rsc: rsc@17a00000 { + compatible = "qcom,rpmh-rsc"; + reg = <0 0x17a00000 0 0x10000>, + <0 0x17a10000 0 0x10000>, + <0 0x17a20000 0 0x10000>, + <0 0x17a30000 0 0x10000>; + reg-names = "drv-0", + "drv-1", + "drv-2"; + + interrupts = , + , + ; + + power-domains = <&CLUSTER_PD>; + + qcom,tcs-offset = <0xd00>; + qcom,drv-id = <2>; + qcom,tcs-config = , , + , ; + + label = "apps_rsc"; + + apps_bcm_voter: bcm-voter { + compatible = "qcom,bcm-voter"; + }; + + rpmhcc: clock-controller { + compatible = "qcom,sm8650-rpmh-clk"; + + clocks = <&xo_board>; + clock-names = "xo"; + + #clock-cells = <1>; + }; + + rpmhpd: power-controller { + compatible = "qcom,sm8650-rpmhpd"; + + operating-points-v2 = <&rpmhpd_opp_table>; + + #power-domain-cells = <1>; + + rpmhpd_opp_table: opp-table { + compatible = "operating-points-v2"; + + rpmhpd_opp_ret: opp-16 { + opp-level = ; + }; + + rpmhpd_opp_min_svs: opp-48 { + opp-level = ; + }; + + rpmhpd_opp_low_svs_d2: opp-52 { + opp-level = ; + }; + + rpmhpd_opp_low_svs_d1: opp-56 { + opp-level = ; + }; + + rpmhpd_opp_low_svs_d0: opp-60 { + opp-level = ; + }; + + rpmhpd_opp_low_svs: opp-64 { + opp-level = ; + }; + + rpmhpd_opp_low_svs_l1: opp-80 { + opp-level = ; + }; + + rpmhpd_opp_svs: opp-128 { + opp-level = ; + }; + + rpmhpd_opp_svs_l0: opp-144 { + opp-level = ; + }; + + rpmhpd_opp_svs_l1: opp-192 { + opp-level = ; + }; + + rpmhpd_opp_nom: opp-256 { + opp-level = ; + }; + + rpmhpd_opp_nom_l1: opp-320 { + opp-level = ; + }; + + rpmhpd_opp_nom_l2: opp-336 { + opp-level = ; + }; + + rpmhpd_opp_turbo: opp-384 { + opp-level = ; + }; + + rpmhpd_opp_turbo_l1: opp-416 { + opp-level = ; + }; + }; + }; + }; + + cpufreq_hw: cpufreq@17d91000 { + compatible = "qcom,sm8650-cpufreq-epss", "qcom,cpufreq-epss"; + reg = <0 0x17d91000 0 0x1000>, + <0 0x17d92000 0 0x1000>, + <0 0x17d93000 0 0x1000>, + <0 0x17d94000 0 0x1000>; + reg-names = "freq-domain0", + "freq-domain1", + "freq-domain2", + "freq-domain3"; + + interrupts = , + , + , + ; + interrupt-names = "dcvsh-irq-0", + "dcvsh-irq-1", + "dcvsh-irq-2", + "dcvsh-irq-3"; + + clocks = <&bi_tcxo_div2>, <&gcc GCC_GPLL0>; + clock-names = "xo", "alternate"; + + #freq-domain-cells = <1>; + #clock-cells = <1>; + }; + + system-cache-controller@25000000 { + compatible = "qcom,sm8650-llcc"; + reg = <0 0x25000000 0 0x200000>, + <0 0x25400000 0 0x200000>, + <0 0x25200000 0 0x200000>, + <0 0x25600000 0 0x200000>, + <0 0x25800000 0 0x200000>; + reg-names = "llcc0_base", + "llcc1_base", + "llcc2_base", + "llcc3_base", + "llcc_broadcast_base"; + + interrupts = ; + }; + }; + + thermal-zones { + aoss0-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens0 0>; + + trips { + trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + + aoss0-critical { + temperature = <110000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + cpuss0-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens0 1>; + + trips { + trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + + cpuss0-critical { + temperature = <110000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + cpuss1-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens0 2>; + + trips { + trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + + cpuss1-critical { + temperature = <110000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + cpuss2-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens0 3>; + + trips { + trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + + cpuss2-critical { + temperature = <110000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + cpuss3-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens0 4>; + + trips { + trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + + cpuss3-critical { + temperature = <110000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + cpu2-top-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens0 5>; + + trips { + trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu2-critical { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu2-bottom-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens0 6>; + + trips { + trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu2-critical { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu3-top-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens0 7>; + + trips { + trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu3-critical { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu3-bottom-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens0 8>; + + trips { + trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu3-critical { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu4-top-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens0 9>; + + trips { + trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu4-critical { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu4-bottom-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens0 10>; + + trips { + trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu4-critical { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu5-top-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens0 11>; + + trips { + trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu5-critical { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu5-bottom-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens0 12>; + + trips { + trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu5-critical { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu6-top-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens0 13>; + + trips { + trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu6-critical { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu6-bottom-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens0 14>; + + trips { + trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu6-critical { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + aoss1-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens1 0>; + + trips { + trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + + aoss1-critical { + temperature = <110000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + cpu7-top-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens1 1>; + + trips { + trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu7-critical { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu7-middle-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens1 2>; + + trips { + trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu7-critical { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu7-bottom-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens1 3>; + + trips { + trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu7-critical { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu0-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens1 4>; + + trips { + trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu0-critical { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu1-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens1 5>; + + trips { + trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu1-critical { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + nsphvx0-thermal { + polling-delay-passive = <10>; + polling-delay = <0>; + thermal-sensors = <&tsens2 6>; + + trips { + trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + + nsphvx1-critical { + temperature = <110000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + nsphvx1-thermal { + polling-delay-passive = <10>; + polling-delay = <0>; + thermal-sensors = <&tsens2 7>; + + trips { + trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + + nsphvx1-critical { + temperature = <110000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + nsphmx0-thermal { + polling-delay-passive = <10>; + polling-delay = <0>; + thermal-sensors = <&tsens2 8>; + + trips { + trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + + nsphmx0-critical { + temperature = <110000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + nsphmx1-thermal { + polling-delay-passive = <10>; + polling-delay = <0>; + thermal-sensors = <&tsens2 9>; + + trips { + trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + + nsphmx1-critical { + temperature = <110000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + nsphmx2-thermal { + polling-delay-passive = <10>; + polling-delay = <0>; + thermal-sensors = <&tsens2 10>; + + trips { + trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + + nsphmx2-critical { + temperature = <110000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + nsphmx3-thermal { + polling-delay-passive = <10>; + polling-delay = <0>; + thermal-sensors = <&tsens2 11>; + + trips { + trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + + nsphmx3-critical { + temperature = <110000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + video-thermal { + polling-delay-passive = <10>; + polling-delay = <0>; + thermal-sensors = <&tsens1 12>; + + trips { + trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + + video-critical { + temperature = <110000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + ddr-thermal { + polling-delay-passive = <10>; + polling-delay = <0>; + thermal-sensors = <&tsens1 13>; + + trips { + trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + + ddr-critical { + temperature = <110000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + camera0-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens1 14>; + + trips { + trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + + camera0-critical { + temperature = <110000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + camera1-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens1 15>; + + trips { + trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + + camera1-critical { + temperature = <110000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + aoss2-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens2 0>; + + trips { + trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + + aoss2-critical { + temperature = <110000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + gpuss0-thermal { + polling-delay-passive = <10>; + polling-delay = <0>; + thermal-sensors = <&tsens2 1>; + + trips { + trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + + gpuss0-critical { + temperature = <110000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + gpuss1-thermal { + polling-delay-passive = <10>; + polling-delay = <0>; + thermal-sensors = <&tsens2 2>; + + trips { + trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + + gpuss1-critical { + temperature = <110000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + gpuss2-thermal { + polling-delay-passive = <10>; + polling-delay = <0>; + thermal-sensors = <&tsens2 3>; + + trips { + trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + + gpuss2-critical { + temperature = <110000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + gpuss3-thermal { + polling-delay-passive = <10>; + polling-delay = <0>; + thermal-sensors = <&tsens2 4>; + + trips { + trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + + gpuss3-critical { + temperature = <110000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + gpuss4-thermal { + polling-delay-passive = <10>; + polling-delay = <0>; + thermal-sensors = <&tsens2 5>; + + trips { + trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + + gpuss4-critical { + temperature = <110000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + gpuss5-thermal { + polling-delay-passive = <10>; + polling-delay = <0>; + thermal-sensors = <&tsens2 6>; + + trips { + trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + + gpuss5-critical { + temperature = <110000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + gpuss6-thermal { + polling-delay-passive = <10>; + polling-delay = <0>; + thermal-sensors = <&tsens2 7>; + + trips { + trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + + gpuss6-critical { + temperature = <110000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + gpuss7-thermal { + polling-delay-passive = <10>; + polling-delay = <0>; + thermal-sensors = <&tsens2 8>; + + trips { + trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + + gpuss7-critical { + temperature = <110000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + modem0-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens2 9>; + + trips { + trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + + modem0-critical { + temperature = <110000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + modem1-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens2 10>; + + trips { + trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + + modem1-critical { + temperature = <110000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + modem2-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens2 11>; + + trips { + trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + + modem2-critical { + temperature = <110000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + modem3-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens2 12>; + + trips { + trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + + modem3-critical { + temperature = <110000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + }; + + timer { + compatible = "arm,armv8-timer"; + + interrupts = , + , + , + ; + }; +}; From patchwork Tue Nov 21 11:00:02 2023 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Neil Armstrong X-Patchwork-Id: 13462826 Authentication-Results: smtp.subspace.kernel.org; dkim=pass (2048-bit key) header.d=linaro.org header.i=@linaro.org header.b="B2HMzVma" Received: from mail-wm1-x32c.google.com (mail-wm1-x32c.google.com [IPv6:2a00:1450:4864:20::32c]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id D01EA11C for ; Tue, 21 Nov 2023 03:00:12 -0800 (PST) Received: by mail-wm1-x32c.google.com with SMTP id 5b1f17b1804b1-4083dbc43cfso20588625e9.3 for ; Tue, 21 Nov 2023 03:00:12 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=linaro.org; s=google; t=1700564411; x=1701169211; darn=vger.kernel.org; h=cc:to:in-reply-to:references:message-id:content-transfer-encoding :mime-version:subject:date:from:from:to:cc:subject:date:message-id :reply-to; bh=Lfu2ORpkeCL1UpHBva1eJY9Hjq38Pt6Ou/3N+ye6TmI=; b=B2HMzVmaK5+6xmtWKuIqmqMB1e34NodefluFbX+2b8jOoPg6elJHdljSZqZsOPBUu7 2VRJ6dbh5bd7lZN+0BbtiVBe99BimGavnmUMXJYkZTSoDK89fCbIoI+HNzryF4lzS4h6 RDQYSTID6iAwIFvuTAIkcTLv84Hym7w6LFdddT+An3jS3DYlm72Agp71eVpl1LJIULcy yRc4Db3rNQbZf0oB1+MXUuq8poHVe+R6bK/e/CmpsI23AwZu2Tk5IZveKfMN3DVCM/c/ LRVfoN5jMN2CVs2RZYhxoiZLzDej/zlo2EF+OHdRu0kKkIywMFCMWvKVpM5YueevtEXO 0zOw== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20230601; t=1700564411; x=1701169211; h=cc:to:in-reply-to:references:message-id:content-transfer-encoding :mime-version:subject:date:from:x-gm-message-state:from:to:cc :subject:date:message-id:reply-to; bh=Lfu2ORpkeCL1UpHBva1eJY9Hjq38Pt6Ou/3N+ye6TmI=; b=f9U3LtS5JoaTulSkERluBHLNaqsreirPuSjvFTkKDIYWFnTkgDI8lTT+Z+/ZTwvwE/ aZuF4mlCZKEhXMX9VykhhnQokcinYe3X6biN9HlBKVIdnIvumFWetJgo68vKHv5HGym3 gBiCUK5tTdgHK+19lpK8JmnxVKWWuGWsw1muFc/QWseG7J6gCG8LzKh+rMyVn+P2E1rK odA1g1g/EZ9vTsD7GhciQbe/QBr0VsaDu/x5NW7Eh8MTCOcp0lSM+G+rbQOka0xR2/YL bs76RIRug9bdR3QoeTsZKFE5WqSZ37ffXTP03PZEivN1KmLH0TcyaTOFw0ZKaPf0iM5D bF3g== X-Gm-Message-State: AOJu0YzBzOzn9mkM05+lD/xZJtsU4eVFn099C9Z+mROuyVjFLnk+ryGV yRG7klpQDCO9KLZUmp4aiNMsJg== X-Google-Smtp-Source: AGHT+IGJEMVbfeQsa1/t0EbFaTPYjVinRX1FCAKKVCsBZQFMfQSrhdYe/avvpXPPTIBbDyl3j1mZkg== X-Received: by 2002:adf:f647:0:b0:331:6d19:6899 with SMTP id x7-20020adff647000000b003316d196899mr5290839wrp.70.1700564411126; Tue, 21 Nov 2023 03:00:11 -0800 (PST) Received: from arrakeen.starnux.net ([2a01:e0a:982:cbb0:8261:5fff:fe11:bdda]) by smtp.gmail.com with ESMTPSA id f1-20020adff581000000b00332c0e934aasm9028500wro.44.2023.11.21.03.00.09 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Tue, 21 Nov 2023 03:00:10 -0800 (PST) From: Neil Armstrong Date: Tue, 21 Nov 2023 12:00:02 +0100 Subject: [PATCH v3 3/8] arm64: dts: qcom: pm8550ve: make PMK8550VE SID configurable Precedence: bulk X-Mailing-List: linux-arm-msm@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 Message-Id: <20231121-topic-sm8650-upstream-dt-v3-3-db9d0507ffd3@linaro.org> References: <20231121-topic-sm8650-upstream-dt-v3-0-db9d0507ffd3@linaro.org> In-Reply-To: <20231121-topic-sm8650-upstream-dt-v3-0-db9d0507ffd3@linaro.org> To: Andy Gross , Bjorn Andersson , Konrad Dybcio , Rob Herring , Krzysztof Kozlowski , Conor Dooley Cc: linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, Neil Armstrong X-Mailer: b4 0.12.3 X-Developer-Signature: v=1; a=openpgp-sha256; l=2054; i=neil.armstrong@linaro.org; h=from:subject:message-id; bh=GxogOVA0VSEH06pH186Sg87gTWs7OvO1dtqJiV/PY6g=; b=owEBbQKS/ZANAwAKAXfc29rIyEnRAcsmYgBlXI20FmYb8a1akK6sOe15+S19QginB6KTJmspXWx6 5Wr+Fj+JAjMEAAEKAB0WIQQ9U8YmyFYF/h30LIt33NvayMhJ0QUCZVyNtAAKCRB33NvayMhJ0XnKD/ 4svV4tZAhMRqfwqYJCWDlSFUN2RgnlhsPb4zZGGlR7PUvbcz40kJsChOP7qejlwT9CIoFBhWXk6YTS zDwLrHiThhoWodlnxQZCKNhYFbNXd5UFG9Z4rUIU2zxNA8+lpij0uG1KZCV/NYkhb3fd3uJRIloden SK9KOpSQExPmdwRILQNMHL6QHm6cKbfUdE4/aQ3ncmHhHMv0atszGEKyy0sdK3SISAjAghMcFQ9sZn qEQqjsfLHLka4VSM7BVTquliRzikZ5QaUX5C6bJKSotV9sfL2PVViRQY4Vtb5LC+uX4bIJ83hDi/se qyTrfARlWjCSqSb2suw5S02ryaI+Syb6caKDCl2xK7rEh8G9SgZTfeI7M8n0NFVaR9TZ0fHt546yik GfJXThMlZATPoXdW1XBMM55Tqw7D9Af7WslegmYvk+MJ9pwIHTmpxNm0RCpVuwPzEnlAPurMmBiush 3Yothail4MOrbVXwvbNL10Wy5CfY+olhPwCwm1EKKoy+jhq1WREDK/9i4CzQjoQDGgTZL6NqKExAPH v7HFHnpeSjYyHc341TrWUCspxEMJz5EV71Xfl43XPhgVNxYSj7ieYPzXmLzlHdkuq1sbZxQlQUrRu/ zvS/8CxVWUPSSu4ch4zFz0xxv+L4JhssQaLXc168YJ2L0dx1BAWDrftjgqTQ== X-Developer-Key: i=neil.armstrong@linaro.org; a=openpgp; fpr=89EC3D058446217450F22848169AB7B1A4CFF8AE The pm8550ve can be found with a different SID on SM8650 platforms, make it configurable. Reviewed-by: Konrad Dybcio Signed-off-by: Neil Armstrong --- arch/arm64/boot/dts/qcom/pm8550ve.dtsi | 6 +++--- arch/arm64/boot/dts/qcom/sm8550-mtp.dts | 1 + arch/arm64/boot/dts/qcom/sm8550-qrd.dts | 1 + 3 files changed, 5 insertions(+), 3 deletions(-) diff --git a/arch/arm64/boot/dts/qcom/pm8550ve.dtsi b/arch/arm64/boot/dts/qcom/pm8550ve.dtsi index c47646a467be..4dc1f03ab2c7 100644 --- a/arch/arm64/boot/dts/qcom/pm8550ve.dtsi +++ b/arch/arm64/boot/dts/qcom/pm8550ve.dtsi @@ -33,16 +33,16 @@ trip1 { &spmi_bus { - pm8550ve: pmic@5 { + pm8550ve: pmic@PMK8550VE_SID { compatible = "qcom,pm8550", "qcom,spmi-pmic"; - reg = <0x5 SPMI_USID>; + reg = ; #address-cells = <1>; #size-cells = <0>; pm8550ve_temp_alarm: temp-alarm@a00 { compatible = "qcom,spmi-temp-alarm"; reg = <0xa00>; - interrupts = <0x5 0xa 0x0 IRQ_TYPE_EDGE_BOTH>; + interrupts = ; #thermal-sensor-cells = <0>; }; diff --git a/arch/arm64/boot/dts/qcom/sm8550-mtp.dts b/arch/arm64/boot/dts/qcom/sm8550-mtp.dts index 9a70875028b7..ac045bfc51e5 100644 --- a/arch/arm64/boot/dts/qcom/sm8550-mtp.dts +++ b/arch/arm64/boot/dts/qcom/sm8550-mtp.dts @@ -10,6 +10,7 @@ #include "pm8010.dtsi" #include "pm8550.dtsi" #include "pm8550b.dtsi" +#define PMK8550VE_SID 5 #include "pm8550ve.dtsi" #include "pm8550vs.dtsi" #include "pmk8550.dtsi" diff --git a/arch/arm64/boot/dts/qcom/sm8550-qrd.dts b/arch/arm64/boot/dts/qcom/sm8550-qrd.dts index eef811def39b..6d5c2312960f 100644 --- a/arch/arm64/boot/dts/qcom/sm8550-qrd.dts +++ b/arch/arm64/boot/dts/qcom/sm8550-qrd.dts @@ -11,6 +11,7 @@ #include "pm8010.dtsi" #include "pm8550.dtsi" #include "pm8550b.dtsi" +#define PMK8550VE_SID 5 #include "pm8550ve.dtsi" #include "pm8550vs.dtsi" #include "pmk8550.dtsi" From patchwork Tue Nov 21 11:00:03 2023 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Neil Armstrong X-Patchwork-Id: 13462828 Authentication-Results: smtp.subspace.kernel.org; dkim=pass (2048-bit key) header.d=linaro.org header.i=@linaro.org header.b="E2Nk2E2I" Received: from mail-wr1-x42f.google.com (mail-wr1-x42f.google.com [IPv6:2a00:1450:4864:20::42f]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 978F0124 for ; Tue, 21 Nov 2023 03:00:13 -0800 (PST) Received: by mail-wr1-x42f.google.com with SMTP id ffacd0b85a97d-32ddfb38c02so3623033f8f.3 for ; Tue, 21 Nov 2023 03:00:13 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=linaro.org; s=google; t=1700564412; x=1701169212; darn=vger.kernel.org; h=cc:to:in-reply-to:references:message-id:content-transfer-encoding :mime-version:subject:date:from:from:to:cc:subject:date:message-id :reply-to; bh=xNXB1jxpBVcieegOcAn+Rf9+MNaMaThAQqx8F63FDFU=; b=E2Nk2E2IlUhJTA0pdA97JtHCnOhZ1a79yDqbXu3uKIVjZhqYx0Q5YKntQsAis9qPaI lO6/RcnZ0YhxkPMfHK8RwZIWLET+rYprveKUBE70zmHU2kwFgDe68vQOCOEFO4q36FRV kVKCwodakh3HHb1PFASY2wG3IlLEmloZBX1lK4G3h+PB6QhD6FZDgsKSCv0Y34q3jSfi B84FNojyvGZYHv+f9Ewtf6Q+umHfnZsx3+9WAzPCG0ENEo2LxNQW6Qqgcpj84rE2Z3ij 1Rhtnzdd7CUg0mSgihWLYsGSsnbmCne6ofLBDnW7IW4fquJd+9dzIwuKLEc3ktXmZ9r6 3png== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20230601; t=1700564412; x=1701169212; h=cc:to:in-reply-to:references:message-id:content-transfer-encoding :mime-version:subject:date:from:x-gm-message-state:from:to:cc :subject:date:message-id:reply-to; bh=xNXB1jxpBVcieegOcAn+Rf9+MNaMaThAQqx8F63FDFU=; b=GeU1WYwuGsMGLAmwZdmYXrqcT4GNq/TVzDm8gXB4Vlp1QdHhc81SBy8prSYLov+Sdk RNwb2pmSuVzpY269mLALAwPoovMNauNyGghbLWjELnyhg6i9gkdseJzI/MYX1PbQpDY9 bHY0xnb4za+RR3FIslaccMXRuV1ZNBz6YfcaWl8tCRG1QTC7Lzg+FK0aw1SknXcNsEox wwYZDBde/ysMxoPEVPJuEJXgdJJKXBFS/csSHnYiBpXaHwG9DL4lyZyYbY/3enCxGiD/ 3kOWaPRQ/E8YE2aEcfQ23HqFp42lxMScwC3P6bOstUYeFgxEKzE4zk1p3gqTPgfE4V7K wUYw== X-Gm-Message-State: AOJu0Yzsb58gwyy+FlXEeJsSd3ainFMnqH0AY5UB5OYjRNvL8Z3mZHHO I04TUU1J0P2QDKVAOZRkD4Fb5g== X-Google-Smtp-Source: AGHT+IHCVE6HnyBKe7FUDyNbC2ckt21FK8sThmlWiidbwCjP35Mdg6DlwRyyizo/ZSoDwosCCZlIIA== X-Received: by 2002:a5d:5b17:0:b0:332:c0e9:8b1f with SMTP id bx23-20020a5d5b17000000b00332c0e98b1fmr6540763wrb.65.1700564412028; Tue, 21 Nov 2023 03:00:12 -0800 (PST) Received: from arrakeen.starnux.net ([2a01:e0a:982:cbb0:8261:5fff:fe11:bdda]) by smtp.gmail.com with ESMTPSA id f1-20020adff581000000b00332c0e934aasm9028500wro.44.2023.11.21.03.00.11 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Tue, 21 Nov 2023 03:00:11 -0800 (PST) From: Neil Armstrong Date: Tue, 21 Nov 2023 12:00:03 +0100 Subject: [PATCH v3 4/8] arm64: dts: qcom: sm8650: add initial SM8650 MTP dts Precedence: bulk X-Mailing-List: linux-arm-msm@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 Message-Id: <20231121-topic-sm8650-upstream-dt-v3-4-db9d0507ffd3@linaro.org> References: <20231121-topic-sm8650-upstream-dt-v3-0-db9d0507ffd3@linaro.org> In-Reply-To: <20231121-topic-sm8650-upstream-dt-v3-0-db9d0507ffd3@linaro.org> To: Andy Gross , Bjorn Andersson , Konrad Dybcio , Rob Herring , Krzysztof Kozlowski , Conor Dooley Cc: linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, Neil Armstrong X-Mailer: b4 0.12.3 X-Developer-Signature: v=1; a=openpgp-sha256; l=13637; i=neil.armstrong@linaro.org; h=from:subject:message-id; bh=MhKxauDrrZWgA86wCI3prgngppQhYya8EbfMDwoc8Xc=; b=owEBbQKS/ZANAwAKAXfc29rIyEnRAcsmYgBlXI20LIKC20Og7jce2J1OcLsX3RBnQWddxY7E3Qk2 jLwByRyJAjMEAAEKAB0WIQQ9U8YmyFYF/h30LIt33NvayMhJ0QUCZVyNtAAKCRB33NvayMhJ0feuD/ 0UgyquHQNb9nhbz6c6c/ie/XIZDuhroSobRjLrFj5HaSdNtBSnqAMYi6nO0z/fu3w8c7+zc5GT7QDg h5ym9OHuu8gxPvGMpPOaLfF6P4io5AEdmHyeac8BMSVMe4PeXn3z2npaNGBZ4nzUMiCCl8/Xr77OGg wrp8UeKZ/tDZngcjQkmFuvnAUIsV4uD6o6I7VUOi1JwlliDTPT1Yf4HuZaEshBBXoo9J8hvVbCOY/k jfeAQwjZF33wJCeibW8f0npBKKVgNdeRIRoDK0SD02eCE5X2xLJ+D12x5qMW+7EidewXf6Kd0Q504o i3mDEpbrGOXJGztHh51dnfKxDzkdJRl6tYSXN/HsbSFCLO4rj5CuV/2NBttqh+OYc+iMZAgJaFTEfa l2MieyE8rxl5ZbHIKBl37GTuRTB23yHnZl/XMvJ3QL9zqSO2vabODdqMmpYLsYF+64Dwh6AqlJRyiS fGcU1ZBT63+nr67BlRkAhrM8x/QN5Cq22hAo+Ky1Ff8U/kmlBCeO24glWUo9a2hw5/tI5eP3twwItG PRqLU1+Jk/NBgP312KP+wOA7i9IZADubxTajkvxyjvguqQd7zTOfQWRIYjHZnwTuGE1RRDbU+HcADP rVsIgwIK31HgEThKPvv+cMNR9teidh6ee80CtPeD4CrvFm6GdJqCD+PA9uCA== X-Developer-Key: i=neil.armstrong@linaro.org; a=openpgp; fpr=89EC3D058446217450F22848169AB7B1A4CFF8AE Add initial QRD (Qualcomm Reference Device) DT, only boots to shell with USB device support. Reviewed-by: Konrad Dybcio Signed-off-by: Neil Armstrong --- arch/arm64/boot/dts/qcom/Makefile | 1 + arch/arm64/boot/dts/qcom/sm8650-mtp.dts | 445 ++++++++++++++++++++++++++++++++ 2 files changed, 446 insertions(+) diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile index d6cb840b7050..d73fd2332a34 100644 --- a/arch/arm64/boot/dts/qcom/Makefile +++ b/arch/arm64/boot/dts/qcom/Makefile @@ -231,3 +231,4 @@ dtb-$(CONFIG_ARCH_QCOM) += sm8450-sony-xperia-nagara-pdx223.dtb dtb-$(CONFIG_ARCH_QCOM) += sm8450-sony-xperia-nagara-pdx224.dtb dtb-$(CONFIG_ARCH_QCOM) += sm8550-mtp.dtb dtb-$(CONFIG_ARCH_QCOM) += sm8550-qrd.dtb +dtb-$(CONFIG_ARCH_QCOM) += sm8650-mtp.dtb diff --git a/arch/arm64/boot/dts/qcom/sm8650-mtp.dts b/arch/arm64/boot/dts/qcom/sm8650-mtp.dts new file mode 100644 index 000000000000..5738791fea2a --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sm8650-mtp.dts @@ -0,0 +1,445 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2023, Linaro Limited + */ + +/dts-v1/; + +#include +#include "sm8650.dtsi" +#include "pm8010.dtsi" +#include "pm8550.dtsi" +#include "pm8550b.dtsi" +#define PMK8550VE_SID 8 +#include "pm8550ve.dtsi" +#include "pm8550vs.dtsi" +#include "pmk8550.dtsi" +#include "pmr735d_a.dtsi" + +/ { + model = "Qualcomm Technologies, Inc. SM8650 MTP"; + compatible = "qcom,sm8650-mtp", "qcom,sm8650"; + + aliases { + serial0 = &uart15; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + vph_pwr: vph-pwr-regulator { + compatible = "regulator-fixed"; + + regulator-name = "vph_pwr"; + regulator-min-microvolt = <3700000>; + regulator-max-microvolt = <3700000>; + + regulator-always-on; + regulator-boot-on; + }; +}; + +&apps_rsc { + regulators-0 { + compatible = "qcom,pm8550-rpmh-regulators"; + + vdd-bob1-supply = <&vph_pwr>; + vdd-bob2-supply = <&vph_pwr>; + vdd-l2-l13-l14-supply = <&vreg_bob1>; + vdd-l3-supply = <&vreg_s1c_1p2>; + vdd-l5-l16-supply = <&vreg_bob1>; + vdd-l6-l7-supply = <&vreg_bob1>; + vdd-l8-l9-supply = <&vreg_bob1>; + vdd-l11-supply = <&vreg_s1c_1p2>; + vdd-l12-supply = <&vreg_s6c_1p8>; + vdd-l15-supply = <&vreg_s6c_1p8>; + vdd-l17-supply = <&vreg_bob2>; + + qcom,pmic-id = "b"; + + vreg_bob1: bob1 { + regulator-name = "vreg_bob1"; + regulator-min-microvolt = <3296000>; + regulator-max-microvolt = <3960000>; + regulator-initial-mode = ; + }; + + vreg_bob2: bob2 { + regulator-name = "vreg_bob2"; + regulator-min-microvolt = <2720000>; + regulator-max-microvolt = <3008000>; + regulator-initial-mode = ; + }; + + vreg_l2b_3p0: ldo2 { + regulator-name = "vreg_l2b_3p0"; + regulator-min-microvolt = <3008000>; + regulator-max-microvolt = <3008000>; + regulator-initial-mode = ; + }; + + vreg_l5b_3p1: ldo5 { + regulator-name = "vreg_l5b_3p1"; + regulator-min-microvolt = <3104000>; + regulator-max-microvolt = <3104000>; + regulator-initial-mode = ; + regulator-allow-set-load; + regulator-allowed-modes = ; + }; + + vreg_l6b_1p8: ldo6 { + regulator-name = "vreg_l6b_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3008000>; + regulator-initial-mode = ; + regulator-allow-set-load; + regulator-allowed-modes = ; + }; + + vreg_l7b_1p8: ldo7 { + regulator-name = "vreg_l7b_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3008000>; + regulator-initial-mode = ; + }; + + vreg_l8b_1p8: ldo8 { + regulator-name = "vreg_l8b_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3008000>; + regulator-initial-mode = ; + regulator-allow-set-load; + regulator-allowed-modes = ; + }; + + vreg_l9b_2p9: ldo9 { + regulator-name = "vreg_l9b_2p9"; + regulator-min-microvolt = <2960000>; + regulator-max-microvolt = <3008000>; + regulator-initial-mode = ; + regulator-allow-set-load; + regulator-allowed-modes = ; + }; + + vreg_l11b_1p2: ldo11 { + regulator-name = "vreg_l11b_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1504000>; + regulator-initial-mode = ; + regulator-allow-set-load; + regulator-allowed-modes = ; + }; + + vreg_l12b_1p8: ldo12 { + regulator-name = "vreg_l12b_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = ; + regulator-allow-set-load; + regulator-allowed-modes = ; + }; + + vreg_l13b_3p0: ldo13 { + regulator-name = "vreg_l13b_3p0"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-initial-mode = ; + regulator-allow-set-load; + regulator-allowed-modes = ; + }; + + vreg_l14b_3p2: ldo14 { + regulator-name = "vreg_l14b_3p2"; + regulator-min-microvolt = <3200000>; + regulator-max-microvolt = <3200000>; + regulator-initial-mode = ; + regulator-allow-set-load; + regulator-allowed-modes = ; + }; + + vreg_l15b_1p8: ldo15 { + regulator-name = "vreg_l15b_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = ; + regulator-allow-set-load; + regulator-allowed-modes = ; + }; + + vreg_l16b_2p8: ldo16 { + regulator-name = "vreg_l16b_2p8"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-initial-mode = ; + regulator-allow-set-load; + regulator-allowed-modes = ; + }; + + vreg_l17b_2p5: ldo17 { + regulator-name = "vreg_l17b_2p5"; + regulator-min-microvolt = <2504000>; + regulator-max-microvolt = <2504000>; + regulator-initial-mode = ; + regulator-allow-set-load; + regulator-allowed-modes = ; + }; + }; + + regulators-1 { + compatible = "qcom,pm8550vs-rpmh-regulators"; + + vdd-l1-supply = <&vreg_s1c_1p2>; + vdd-l2-supply = <&vreg_s1c_1p2>; + vdd-l3-supply = <&vreg_s1c_1p2>; + vdd-s1-supply = <&vph_pwr>; + vdd-s2-supply = <&vph_pwr>; + vdd-s3-supply = <&vph_pwr>; + vdd-s4-supply = <&vph_pwr>; + vdd-s5-supply = <&vph_pwr>; + vdd-s6-supply = <&vph_pwr>; + + qcom,pmic-id = "c"; + + vreg_s1c_1p2: smps1 { + regulator-name = "vreg_s1c_1p2"; + regulator-min-microvolt = <1256000>; + regulator-max-microvolt = <1348000>; + regulator-initial-mode = ; + }; + + vreg_s2c_0p8: smps2 { + regulator-name = "vreg_s2c_0p8"; + regulator-min-microvolt = <852000>; + regulator-max-microvolt = <1036000>; + regulator-initial-mode = ; + }; + + vreg_s3c_0p9: smps3 { + regulator-name = "vreg_s3c_0p9"; + regulator-min-microvolt = <976000>; + regulator-max-microvolt = <1064000>; + regulator-initial-mode = ; + }; + + vreg_s4c_1p2: smps4 { + regulator-name = "vreg_s4c_1p2"; + regulator-min-microvolt = <1224000>; + regulator-max-microvolt = <1280000>; + regulator-initial-mode = ; + }; + + vreg_s5c_0p7: smps5 { + regulator-name = "vreg_s5c_0p7"; + regulator-min-microvolt = <752000>; + regulator-max-microvolt = <900000>; + regulator-initial-mode = ; + }; + + vreg_s6c_1p8: smps6 { + regulator-name = "vreg_s6c_1p8"; + regulator-min-microvolt = <1856000>; + regulator-max-microvolt = <2000000>; + regulator-initial-mode = ; + }; + + vreg_l1c_1p2: ldo1 { + regulator-name = "vreg_l1c_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = ; + regulator-allow-set-load; + regulator-allowed-modes = ; + }; + + vreg_l3c_1p2: ldo3 { + regulator-name = "vreg_l3c_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = ; + regulator-allow-set-load; + regulator-allowed-modes = ; + }; + }; + + regulators-2 { + compatible = "qcom,pm8550vs-rpmh-regulators"; + + vdd-l1-supply = <&vreg_s3c_0p9>; + + qcom,pmic-id = "d"; + + vreg_l1d_0p88: ldo1 { + regulator-name = "vreg_l1d_0p88"; + regulator-min-microvolt = <912000>; + regulator-max-microvolt = <920000>; + regulator-initial-mode = ; + regulator-allow-set-load; + regulator-allowed-modes = ; + }; + }; + + regulators-3 { + compatible = "qcom,pm8550vs-rpmh-regulators"; + + vdd-l3-supply = <&vreg_s3c_0p9>; + + qcom,pmic-id = "e"; + + vreg_l3e_0p9: ldo3 { + regulator-name = "vreg_l3e_0p9"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <920000>; + regulator-initial-mode = ; + regulator-allow-set-load; + regulator-allowed-modes = ; + }; + }; + + regulators-4 { + compatible = "qcom,pm8550vs-rpmh-regulators"; + + vdd-l1-supply = <&vreg_s3c_0p9>; + vdd-l3-supply = <&vreg_s3c_0p9>; + + qcom,pmic-id = "g"; + + vreg_l1g_0p91: ldo1 { + regulator-name = "vreg_l1g_0p91"; + regulator-min-microvolt = <912000>; + regulator-max-microvolt = <920000>; + regulator-initial-mode = ; + regulator-allow-set-load; + regulator-allowed-modes = ; + }; + + vreg_l3g_0p91: ldo3 { + regulator-name = "vreg_l3g_0p91"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <912000>; + regulator-initial-mode = ; + regulator-allow-set-load; + regulator-allowed-modes = ; + }; + }; + + regulators-5 { + compatible = "qcom,pm8550ve-rpmh-regulators"; + + vdd-l1-supply = <&vreg_s3c_0p9>; + vdd-l2-supply = <&vreg_s3c_0p9>; + vdd-l3-supply = <&vreg_s1c_1p2>; + vdd-s4-supply = <&vph_pwr>; + + qcom,pmic-id = "i"; + + vreg_s4i_0p85: smps4 { + regulator-name = "vreg_s4i_0p85"; + regulator-min-microvolt = <852000>; + regulator-max-microvolt = <1004000>; + regulator-initial-mode = ; + }; + + vreg_l1i_0p88: ldo1 { + regulator-name = "vreg_l1i_0p88"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <912000>; + regulator-initial-mode = ; + regulator-allow-set-load; + regulator-allowed-modes = ; + }; + + vreg_l2i_0p88: ldo2 { + regulator-name = "vreg_l2i_0p88"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <912000>; + regulator-initial-mode = ; + regulator-allow-set-load; + regulator-allowed-modes = ; + }; + + vreg_l3i_1p2: ldo3 { + regulator-name = "vreg_l3i_0p91"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = ; + regulator-allow-set-load; + regulator-allowed-modes = ; + }; + }; +}; + +&pm8550b_eusb2_repeater { + vdd18-supply = <&vreg_l15b_1p8>; + vdd3-supply = <&vreg_l5b_3p1>; +}; + +&qupv3_id_1 { + status = "okay"; +}; + +&sleep_clk { + clock-frequency = <32000>; +}; + +&tlmm { + gpio-reserved-ranges = <32 8>; +}; + +&uart15 { + status = "okay"; +}; + +/* + * DPAUX -> WCD9395 -> USB_SBU -> USB-C + * eUSB2 DP/DM -> PM85550HS -> eUSB2 DP/DM -> USB-C + * USB SS -> USB-C + */ + +&usb_1 { + status = "okay"; +}; + +&usb_1_dwc3 { + dr_mode = "peripheral"; +}; + +&usb_1_hsphy { + vdd-supply = <&vreg_l1i_0p88>; + vdda12-supply = <&vreg_l3i_1p2>; + + phys = <&pm8550b_eusb2_repeater>; + + status = "okay"; +}; + +&usb_dp_qmpphy { + vdda-phy-supply = <&vreg_l3i_1p2>; + vdda-pll-supply = <&vreg_l3g_0p91>; + + status = "okay"; +}; + +&xo_board { + clock-frequency = <76800000>; +}; From patchwork Tue Nov 21 11:00:04 2023 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Neil Armstrong X-Patchwork-Id: 13462830 Authentication-Results: smtp.subspace.kernel.org; dkim=pass (2048-bit key) header.d=linaro.org header.i=@linaro.org header.b="SP2j6l/H" Received: from mail-wr1-x431.google.com (mail-wr1-x431.google.com [IPv6:2a00:1450:4864:20::431]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 85C00CA for ; Tue, 21 Nov 2023 03:00:14 -0800 (PST) Received: by mail-wr1-x431.google.com with SMTP id ffacd0b85a97d-32d9effe314so3838783f8f.3 for ; Tue, 21 Nov 2023 03:00:14 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=linaro.org; s=google; t=1700564413; x=1701169213; darn=vger.kernel.org; h=cc:to:in-reply-to:references:message-id:content-transfer-encoding :mime-version:subject:date:from:from:to:cc:subject:date:message-id :reply-to; bh=T1L0IGLHrMSmbmxwho19YEnFKRvMRWS83xENNk7/0Co=; b=SP2j6l/HgAr7gPpzZpJYP9D4NU6PxJluMgNfVQZWE3fcwoGtZdjiXqSuHq02I+KIoj P1A0t/MAHLdmrgHQVCLag9tUhmD2+4/4gaxiGm0q/RQ1tY1n9GC4yyV7Ow4GTy6zF339 tZadPpGzkkTLAHyQBUzjY3JqfFVweiEVyLyZLXB4sA9H4iVrorx0xBAg11zxQ3j+Ntmh 3MvHcFRYBF2hVadnw+l3A3Ad96s62rLPjTFLPZBu8QkzWNBf7jzNUTYH3q5XLk9TkL+1 lKEvqJjET8/HBIeHak8UAdcQrhhH0OLRLalpxboSm6ihKVVo/3ivOqY6TM0QOGx2u/k2 qajQ== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20230601; t=1700564413; x=1701169213; h=cc:to:in-reply-to:references:message-id:content-transfer-encoding :mime-version:subject:date:from:x-gm-message-state:from:to:cc :subject:date:message-id:reply-to; bh=T1L0IGLHrMSmbmxwho19YEnFKRvMRWS83xENNk7/0Co=; b=IZ+ZTdVMHMJnmAFPIE1e+BodxgZlgnClJhP9K/uOQWSV2EmxvD0jHQJQoW8jP2Pwk9 OhvuF2bwHIBCe3dMDp8rIyBojKsnl0W/74ZcaZpogmHVjafpYY+M+XHtfbjMi0YhXjW6 3QtfmUIOpN8aiN1Hnl4gnsmuXXgp0d6P1zCr3KHAPFHjC9cDODfOlY5vmP9zNnJI8FCN NRfL9gpSHvaAKlK0gBPVTpUYKAvIMNuu1yOIbcCZseVcRJgM1BK3AaWe310v/+SKR7Qi GwUcsfqUr9+YdHp8Tgyjv1c5XR3Adecq41K77Cgahmf7qKKseIJ8n5XofwMxcmXOLIP/ GfPA== X-Gm-Message-State: AOJu0Yz5yHNhTaRLyQq1lo7rRT0C44ctB7EqBT/z4AHQ+mPRE1xiHh9s 6aEWHiU+NGlFBCD457OwC0zc0w== X-Google-Smtp-Source: AGHT+IH6TCzvWOy73Tqki9jP26wrIdWbKfS+404x5Lmmfc4Hj+2HbXXgD0DFPlYj/6m31aWipkcN9w== X-Received: by 2002:adf:f591:0:b0:331:6a5a:686 with SMTP id f17-20020adff591000000b003316a5a0686mr6090447wro.23.1700564412910; Tue, 21 Nov 2023 03:00:12 -0800 (PST) Received: from arrakeen.starnux.net ([2a01:e0a:982:cbb0:8261:5fff:fe11:bdda]) by smtp.gmail.com with ESMTPSA id f1-20020adff581000000b00332c0e934aasm9028500wro.44.2023.11.21.03.00.12 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Tue, 21 Nov 2023 03:00:12 -0800 (PST) From: Neil Armstrong Date: Tue, 21 Nov 2023 12:00:04 +0100 Subject: [PATCH v3 5/8] arm64: dts: qcom: sm8650: add initial SM8650 QRD dts Precedence: bulk X-Mailing-List: linux-arm-msm@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 Message-Id: <20231121-topic-sm8650-upstream-dt-v3-5-db9d0507ffd3@linaro.org> References: <20231121-topic-sm8650-upstream-dt-v3-0-db9d0507ffd3@linaro.org> In-Reply-To: <20231121-topic-sm8650-upstream-dt-v3-0-db9d0507ffd3@linaro.org> To: Andy Gross , Bjorn Andersson , Konrad Dybcio , Rob Herring , Krzysztof Kozlowski , Conor Dooley Cc: linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, Neil Armstrong X-Mailer: b4 0.12.3 X-Developer-Signature: v=1; a=openpgp-sha256; l=15126; i=neil.armstrong@linaro.org; h=from:subject:message-id; bh=BJX3H7T6r5zyOk3dKr4bs1phC85sc0l1Kxgbkl+sH+Y=; b=owEBbQKS/ZANAwAKAXfc29rIyEnRAcsmYgBlXI21wVNoGWjafAff3nW4hDKrY2Jg809MX+GM8H+V e7rUJg2JAjMEAAEKAB0WIQQ9U8YmyFYF/h30LIt33NvayMhJ0QUCZVyNtQAKCRB33NvayMhJ0ZbDEA CcyWXI/560BV5WGxztqnlfvfWBgsjbPB5ZlzNHmc3WxGRe3J1C1AwRnQrXLqrDW5nmqloFeOuOPlgU gZUzH+13FAOGiirCOD/0cyKdCjOMk5Lxc5aZw34ZRSVu1S54VWtsWsQLt/Lba47z2zANvfBDopSw7h IClfvfSSRgL6KrirLGpGzXMziXEDhkQx+bMDk9cO8+vYSB11dmiwPSi0Bxrk74E393QUBnq1h7JVAA +7+6nQSqpKxlplvEnqt9lSXdvAi+yUfX4Y5qaVKhj3orDKVjykdsMo1DAlt5l+4f4ViPruveaERbuC NbfYb9TL7ASTYKb2yV9ggQpuzl5ORH93pA8dIeOq7uh31zw7WtziiWcwkk24S9E32qzSj9Qlxh+xy8 rWVrLPTpr2Xiik/1se1bl8SaNiAo6roL/TOzoKOkmXM/YRt8aCu8rzk0jMwwLNUcsMNzp+1p8jYOy8 JaEXe1RIZqZ8LuLxw5Rn96rZnFb5EnpcjEA9e7hjLkkiXFyIo6frAZSWFurt0wfmgFubdq/sXNVtuo EnCEDeSGza4gNTImDUJk+3jFn01litoNzsnzdJ+lvrUQkKvKUilPDqo7DMuYKMzNINRvhgTUo6EK82 dWoTHzP8JQ3dRVfq044K4xjjpetGPt5hTkI5FBZpwej+RiSg4KSUghezNXqQ== X-Developer-Key: i=neil.armstrong@linaro.org; a=openpgp; fpr=89EC3D058446217450F22848169AB7B1A4CFF8AE Add initial QRD (Qualcomm Reference Device) DT, it supports boot to shell with buttons, leds and USB peripheral. Reviewed-by: Konrad Dybcio Signed-off-by: Neil Armstrong --- arch/arm64/boot/dts/qcom/Makefile | 1 + arch/arm64/boot/dts/qcom/sm8650-qrd.dts | 530 ++++++++++++++++++++++++++++++++ 2 files changed, 531 insertions(+) diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile index d73fd2332a34..821bacf3ddb5 100644 --- a/arch/arm64/boot/dts/qcom/Makefile +++ b/arch/arm64/boot/dts/qcom/Makefile @@ -232,3 +232,4 @@ dtb-$(CONFIG_ARCH_QCOM) += sm8450-sony-xperia-nagara-pdx224.dtb dtb-$(CONFIG_ARCH_QCOM) += sm8550-mtp.dtb dtb-$(CONFIG_ARCH_QCOM) += sm8550-qrd.dtb dtb-$(CONFIG_ARCH_QCOM) += sm8650-mtp.dtb +dtb-$(CONFIG_ARCH_QCOM) += sm8650-qrd.dtb diff --git a/arch/arm64/boot/dts/qcom/sm8650-qrd.dts b/arch/arm64/boot/dts/qcom/sm8650-qrd.dts new file mode 100644 index 000000000000..f5ce4c889680 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sm8650-qrd.dts @@ -0,0 +1,530 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2023, Linaro Limited + */ + +/dts-v1/; + +#include +#include +#include "sm8650.dtsi" +#include "pm8010.dtsi" +#include "pm8550.dtsi" +#include "pm8550b.dtsi" +#define PMK8550VE_SID 8 +#include "pm8550ve.dtsi" +#include "pm8550vs.dtsi" +#include "pmk8550.dtsi" +#include "pmr735d_a.dtsi" + +/ { + model = "Qualcomm Technologies, Inc. SM8650 QRD"; + compatible = "qcom,sm8650-qrd", "qcom,sm8650"; + + aliases { + serial0 = &uart15; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + gpio-keys { + compatible = "gpio-keys"; + + pinctrl-0 = <&volume_up_n>; + pinctrl-names = "default"; + + key-volume-up { + label = "Volume Up"; + linux,code = ; + gpios = <&pm8550_gpios 6 GPIO_ACTIVE_LOW>; + debounce-interval = <15>; + linux,can-disable; + wakeup-source; + }; + }; + + vph_pwr: vph-pwr-regulator { + compatible = "regulator-fixed"; + + regulator-name = "vph_pwr"; + regulator-min-microvolt = <3700000>; + regulator-max-microvolt = <3700000>; + + regulator-always-on; + regulator-boot-on; + }; +}; + +&apps_rsc { + regulators-0 { + compatible = "qcom,pm8550-rpmh-regulators"; + + vdd-bob1-supply = <&vph_pwr>; + vdd-bob2-supply = <&vph_pwr>; + vdd-l2-l13-l14-supply = <&vreg_bob1>; + vdd-l3-supply = <&vreg_s1c_1p2>; + vdd-l5-l16-supply = <&vreg_bob1>; + vdd-l6-l7-supply = <&vreg_bob1>; + vdd-l8-l9-supply = <&vreg_bob1>; + vdd-l11-supply = <&vreg_s1c_1p2>; + vdd-l12-supply = <&vreg_s6c_1p8>; + vdd-l15-supply = <&vreg_s6c_1p8>; + vdd-l17-supply = <&vreg_bob2>; + + qcom,pmic-id = "b"; + + vreg_bob1: bob1 { + regulator-name = "vreg_bob1"; + regulator-min-microvolt = <3296000>; + regulator-max-microvolt = <3960000>; + regulator-initial-mode = ; + }; + + vreg_bob2: bob2 { + regulator-name = "vreg_bob2"; + regulator-min-microvolt = <2720000>; + regulator-max-microvolt = <3008000>; + regulator-initial-mode = ; + }; + + vreg_l2b_3p0: ldo2 { + regulator-name = "vreg_l2b_3p0"; + regulator-min-microvolt = <3008000>; + regulator-max-microvolt = <3008000>; + regulator-initial-mode = ; + regulator-allow-set-load; + regulator-allowed-modes = ; + }; + + vreg_l5b_3p1: ldo5 { + regulator-name = "vreg_l5b_3p1"; + regulator-min-microvolt = <3104000>; + regulator-max-microvolt = <3104000>; + regulator-initial-mode = ; + regulator-allow-set-load; + regulator-allowed-modes = ; + }; + + vreg_l6b_1p8: ldo6 { + regulator-name = "vreg_l6b_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3008000>; + regulator-initial-mode = ; + regulator-allow-set-load; + regulator-allowed-modes = ; + }; + + vreg_l7b_1p8: ldo7 { + regulator-name = "vreg_l7b_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3008000>; + regulator-initial-mode = ; + }; + + vreg_l8b_1p8: ldo8 { + regulator-name = "vreg_l8b_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3008000>; + regulator-initial-mode = ; + regulator-allow-set-load; + regulator-allowed-modes = ; + }; + + vreg_l11b_1p2: ldo11 { + regulator-name = "vreg_l11b_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1504000>; + regulator-initial-mode = ; + regulator-allow-set-load; + regulator-allowed-modes = ; + }; + + vreg_l12b_1p8: ldo12 { + regulator-name = "vreg_l12b_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = ; + regulator-allow-set-load; + regulator-allowed-modes = ; + }; + + vreg_l13b_3p0: ldo13 { + regulator-name = "vreg_l13b_3p0"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-initial-mode = ; + regulator-allow-set-load; + regulator-allowed-modes = ; + }; + + vreg_l14b_3p2: ldo14 { + regulator-name = "vreg_l14b_3p2"; + regulator-min-microvolt = <3200000>; + regulator-max-microvolt = <3200000>; + regulator-initial-mode = ; + regulator-allow-set-load; + regulator-allowed-modes = ; + }; + + vreg_l15b_1p8: ldo15 { + regulator-name = "vreg_l15b_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = ; + regulator-allow-set-load; + regulator-allowed-modes = ; + }; + + vreg_l16b_2p8: ldo16 { + regulator-name = "vreg_l16b_2p8"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-initial-mode = ; + regulator-allow-set-load; + regulator-allowed-modes = ; + }; + + vreg_l17b_2p5: ldo17 { + regulator-name = "vreg_l17b_2p5"; + regulator-min-microvolt = <2504000>; + regulator-max-microvolt = <2504000>; + regulator-initial-mode = ; + regulator-allow-set-load; + regulator-allowed-modes = ; + }; + }; + + regulators-1 { + compatible = "qcom,pm8550vs-rpmh-regulators"; + + vdd-l1-supply = <&vreg_s1c_1p2>; + vdd-l2-supply = <&vreg_s1c_1p2>; + vdd-l3-supply = <&vreg_s1c_1p2>; + vdd-s1-supply = <&vph_pwr>; + vdd-s2-supply = <&vph_pwr>; + vdd-s3-supply = <&vph_pwr>; + vdd-s4-supply = <&vph_pwr>; + vdd-s5-supply = <&vph_pwr>; + vdd-s6-supply = <&vph_pwr>; + + qcom,pmic-id = "c"; + + vreg_s1c_1p2: smps1 { + regulator-name = "vreg_s1c_1p2"; + regulator-min-microvolt = <1256000>; + regulator-max-microvolt = <1348000>; + regulator-initial-mode = ; + }; + + vreg_s2c_0p8: smps2 { + regulator-name = "vreg_s2c_0p8"; + regulator-min-microvolt = <852000>; + regulator-max-microvolt = <1036000>; + regulator-initial-mode = ; + }; + + vreg_s3c_0p9: smps3 { + regulator-name = "vreg_s3c_0p9"; + regulator-min-microvolt = <976000>; + regulator-max-microvolt = <1064000>; + regulator-initial-mode = ; + }; + + vreg_s4c_1p2: smps4 { + regulator-name = "vreg_s4c_1p2"; + regulator-min-microvolt = <1224000>; + regulator-max-microvolt = <1280000>; + regulator-initial-mode = ; + }; + + vreg_s5c_0p7: smps5 { + regulator-name = "vreg_s5c_0p7"; + regulator-min-microvolt = <752000>; + regulator-max-microvolt = <900000>; + regulator-initial-mode = ; + }; + + vreg_s6c_1p8: smps6 { + regulator-name = "vreg_s6c_1p8"; + regulator-min-microvolt = <1856000>; + regulator-max-microvolt = <2000000>; + regulator-initial-mode = ; + }; + + vreg_l1c_1p2: ldo1 { + regulator-name = "vreg_l1c_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = ; + regulator-allow-set-load; + regulator-allowed-modes = ; + }; + + vreg_l3c_1p2: ldo3 { + regulator-name = "vreg_l3c_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = ; + regulator-allow-set-load; + regulator-allowed-modes = ; + }; + }; + + regulators-2 { + compatible = "qcom,pm8550vs-rpmh-regulators"; + + vdd-l1-supply = <&vreg_s3c_0p9>; + + qcom,pmic-id = "d"; + + vreg_l1d_0p88: ldo1 { + regulator-name = "vreg_l1d_0p88"; + regulator-min-microvolt = <912000>; + regulator-max-microvolt = <920000>; + regulator-initial-mode = ; + regulator-allow-set-load; + regulator-allowed-modes = ; + }; + }; + + regulators-3 { + compatible = "qcom,pm8550vs-rpmh-regulators"; + + vdd-l3-supply = <&vreg_s3c_0p9>; + + qcom,pmic-id = "e"; + + vreg_l3e_0p9: ldo3 { + regulator-name = "vreg_l3e_0p9"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <920000>; + regulator-initial-mode = ; + regulator-allow-set-load; + regulator-allowed-modes = ; + }; + }; + + regulators-4 { + compatible = "qcom,pm8550vs-rpmh-regulators"; + + vdd-l1-supply = <&vreg_s3c_0p9>; + vdd-l3-supply = <&vreg_s3c_0p9>; + + qcom,pmic-id = "g"; + + vreg_l1g_0p91: ldo1 { + regulator-name = "vreg_l1g_0p91"; + regulator-min-microvolt = <912000>; + regulator-max-microvolt = <920000>; + regulator-initial-mode = ; + regulator-allow-set-load; + regulator-allowed-modes = ; + }; + + vreg_l3g_0p91: ldo3 { + regulator-name = "vreg_l3g_0p91"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <912000>; + regulator-initial-mode = ; + regulator-allow-set-load; + regulator-allowed-modes = ; + }; + }; + + regulators-5 { + compatible = "qcom,pm8550ve-rpmh-regulators"; + + vdd-l1-supply = <&vreg_s3c_0p9>; + vdd-l2-supply = <&vreg_s3c_0p9>; + vdd-l3-supply = <&vreg_s1c_1p2>; + vdd-s4-supply = <&vph_pwr>; + + qcom,pmic-id = "i"; + + vreg_s4i_0p85: smps4 { + regulator-name = "vreg_s4i_0p85"; + regulator-min-microvolt = <852000>; + regulator-max-microvolt = <1004000>; + regulator-initial-mode = ; + }; + + vreg_l1i_0p88: ldo1 { + regulator-name = "vreg_l1i_0p88"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <912000>; + regulator-initial-mode = ; + regulator-allow-set-load; + regulator-allowed-modes = ; + }; + + vreg_l2i_0p88: ldo2 { + regulator-name = "vreg_l2i_0p88"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <912000>; + regulator-initial-mode = ; + regulator-allow-set-load; + regulator-allowed-modes = ; + }; + + vreg_l3i_1p2: ldo3 { + regulator-name = "vreg_l3i_0p91"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = ; + regulator-allow-set-load; + regulator-allowed-modes = ; + }; + }; +}; + +&pon_pwrkey { + status = "okay"; +}; + +&pon_resin { + linux,code = ; + + status = "okay"; +}; + +&pm8550_flash { + status = "okay"; + + led-0 { + function = LED_FUNCTION_FLASH; + color = ; + led-sources = <1>, <4>; + led-max-microamp = <500000>; + flash-max-microamp = <2000000>; + flash-max-timeout-us = <1280000>; + function-enumerator = <0>; + }; + + led-1 { + function = LED_FUNCTION_FLASH; + color = ; + led-sources = <2>, <3>; + led-max-microamp = <500000>; + flash-max-microamp = <2000000>; + flash-max-timeout-us = <1280000>; + function-enumerator = <1>; + }; +}; + +&pm8550_gpios { + volume_up_n: volume-up-n-state { + pins = "gpio6"; + function = "normal"; + bias-pull-up; + input-enable; + power-source = <1>; + }; +}; + +&pm8550_pwm { + status = "okay"; + + multi-led { + color = ; + function = LED_FUNCTION_STATUS; + + #address-cells = <1>; + #size-cells = <0>; + + led@1 { + reg = <1>; + color = ; + }; + + led@2 { + reg = <2>; + color = ; + }; + + led@3 { + reg = <3>; + color = ; + }; + }; +}; + +&pm8550b_eusb2_repeater { + vdd18-supply = <&vreg_l15b_1p8>; + vdd3-supply = <&vreg_l5b_3p1>; +}; + +&pmk8550_rtc { + status = "okay"; +}; + +&qupv3_id_1 { + status = "okay"; +}; + +&sleep_clk { + clock-frequency = <32000>; +}; + +&tlmm { + gpio-reserved-ranges = <32 8>; +}; + +&uart15 { + status = "okay"; +}; + +/* + * DPAUX -> WCD9395 -> USB_SBU -> USB-C + * eUSB2 DP/DM -> PM85550HS -> eUSB2 DP/DM -> WCD9395 -> USB-C + * USB SS -> NB7VPQ904MMUTWG -> USB-C + */ + +&usb_1 { + status = "okay"; +}; + +&usb_1_dwc3 { + dr_mode = "peripheral"; +}; + +&usb_1_hsphy { + vdd-supply = <&vreg_l1i_0p88>; + vdda12-supply = <&vreg_l3i_1p2>; + + phys = <&pm8550b_eusb2_repeater>; + + status = "okay"; +}; + +&usb_dp_qmpphy { + vdda-phy-supply = <&vreg_l3i_1p2>; + vdda-pll-supply = <&vreg_l3g_0p91>; + + status = "okay"; +}; + +&xo_board { + clock-frequency = <76800000>; +}; From patchwork Tue Nov 21 11:00:05 2023 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Neil Armstrong X-Patchwork-Id: 13462832 Authentication-Results: smtp.subspace.kernel.org; dkim=pass (2048-bit key) header.d=linaro.org header.i=@linaro.org header.b="Kru+lbKJ" Received: from mail-wm1-x334.google.com (mail-wm1-x334.google.com [IPv6:2a00:1450:4864:20::334]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 6A552F4 for ; Tue, 21 Nov 2023 03:00:16 -0800 (PST) Received: by mail-wm1-x334.google.com with SMTP id 5b1f17b1804b1-4083ac51d8aso24312845e9.2 for ; Tue, 21 Nov 2023 03:00:16 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=linaro.org; s=google; t=1700564415; x=1701169215; darn=vger.kernel.org; h=cc:to:in-reply-to:references:message-id:content-transfer-encoding :mime-version:subject:date:from:from:to:cc:subject:date:message-id :reply-to; bh=A6rKaoxyWat4VmbZOBHCvEAo6NQRBiQ9ZD1p/+tcFuY=; b=Kru+lbKJr6slhQeI7LegrIYSCNUvj24KivXgNDyVy/NgFNZqO2cVUyCWEtzooGOZYT Teijpquoese7ne5JwoVO2G6Ufo1cc+w/433/aOmnrA6OmwjTu3tdhrpYN+k3FUaEubmc I67+HW3q3/iFcRD42CX8aQ+LVsAEIYMXyEkqwm8cDOVU0rQI4ki3UKMpjFWNw9wsiXLf c30XY+tUBbZ43QVyORObSWS3gzZYC7bzGKACkePHMADkMTMsv63+fICPcG1fzLRS486e 9d7P8tzJZbEK2d2GP+cfbbl20wQrIoOMDPIjM6P1Em4kC+sqYfSO1hrPXRRK/YpSCqCI K0xQ== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20230601; t=1700564415; x=1701169215; h=cc:to:in-reply-to:references:message-id:content-transfer-encoding :mime-version:subject:date:from:x-gm-message-state:from:to:cc :subject:date:message-id:reply-to; bh=A6rKaoxyWat4VmbZOBHCvEAo6NQRBiQ9ZD1p/+tcFuY=; b=EHHxVTx1+QGodiRjaEKURFzhAOjIwNdAUXW/128atWjW4Qq28wIGTKDYT9GSXGFiMB 8gfFduppqa4glel/hXyqegfuLJRs0VZCATovczbpoBEqZOLkrXVW9XUuBNGkWY9+afz7 SuA1Sus9/YCKmXoINrV787HCAnKVqkPVkfSJTr2FXeYOoELCEJF/H4S8Q/kY5hnUhiLR VEZvLVmV45TwWdfN+nXonFL+1V0o7+l+a++Y7jAO3GkvCPYs4KeMofAWkLaWkqW0yWfN PVGJWISFsj0CCNsXp3chHfd+T1mw/LRNRxDOTKZORWHD8g69yOlVs45D7MCKX9NNlqUR ttHQ== X-Gm-Message-State: AOJu0YyzTYHhWAaz0kLGVn7YgcNjEHGvESb6cuCa5TQhFuZA86UR8/md rRDecDcsM+sB6pG9MEwLBPuYKjHg4EajQI9u2lBwPZo8 X-Google-Smtp-Source: AGHT+IGAQcKmBkWPZuPPW6WQIbprcOnhRZcFpJbN3vQJY3h9yYF5s7srNDQR27gmS8sGOb0dAmK2NA== X-Received: by 2002:a05:6000:bc2:b0:332:cdd2:2f19 with SMTP id dm2-20020a0560000bc200b00332cdd22f19mr1058049wrb.38.1700564413928; Tue, 21 Nov 2023 03:00:13 -0800 (PST) Received: from arrakeen.starnux.net ([2a01:e0a:982:cbb0:8261:5fff:fe11:bdda]) by smtp.gmail.com with ESMTPSA id f1-20020adff581000000b00332c0e934aasm9028500wro.44.2023.11.21.03.00.13 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Tue, 21 Nov 2023 03:00:13 -0800 (PST) From: Neil Armstrong Date: Tue, 21 Nov 2023 12:00:05 +0100 Subject: [PATCH v3 6/8] arm64: dts: qcom: sm8650: add interconnect dependent device nodes Precedence: bulk X-Mailing-List: linux-arm-msm@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 Message-Id: <20231121-topic-sm8650-upstream-dt-v3-6-db9d0507ffd3@linaro.org> References: <20231121-topic-sm8650-upstream-dt-v3-0-db9d0507ffd3@linaro.org> In-Reply-To: <20231121-topic-sm8650-upstream-dt-v3-0-db9d0507ffd3@linaro.org> To: Andy Gross , Bjorn Andersson , Konrad Dybcio , Rob Herring , Krzysztof Kozlowski , Conor Dooley Cc: linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, Neil Armstrong X-Mailer: b4 0.12.3 X-Developer-Signature: v=1; a=openpgp-sha256; l=98594; i=neil.armstrong@linaro.org; h=from:subject:message-id; bh=6uq5Hzkuqo/KzNk+aHO1e5czzqvfZee1ripgNMbaS1Y=; b=owEBbQKS/ZANAwAKAXfc29rIyEnRAcsmYgBlXI21uWceiZyYa+YQ2bZ5wxd09h579ME0IbWFlDs7 4yGSciWJAjMEAAEKAB0WIQQ9U8YmyFYF/h30LIt33NvayMhJ0QUCZVyNtQAKCRB33NvayMhJ0VGdEA CwplXI6N9Yuwi9hn7rbYxapOFDGowP0tQTVdc+DdZ5O79BkDHju3YgXx2MtEjw8tcIeBWFCfNFLWlr /bSo1jDY1prIQOdFOm1R9TIQIyzGqV0mTxUfVZCBZVD6wJwDbsN0uWU6moP7tdAns7N+a7f1MV42D3 PestOSmVnuW9w1smFzW6Oo5uPJ+LVq2C5K87ZWM1z48WsHUsU3rHPeUChdApaWdtW3nYHY6lmxmQoO woHXC8z1uJxI1BBx9VZB8mbb0kLB6DLb0/EHkmg3nI0RujOPq4eeppOaO4gOIFQU89USG3w60lu9rA 2Tdz2n8T1fsFaCBE7xe8ZVKrbAcD4NvTSt6e+s0ep1x6wu5Wl4/4/rh57ALRwRmpxw0wqOhp3gxXKW /UighylVYRQSVD1aUdOm/lvFaggpdOia1taaNIZM3lvBCJQXluLXKuaqJb2yS8V1TkgoH7Uch9KT3K jk/m36d6H5xpyJTUSyzsiB+iJ0FGKkg0jSDdGk5EaY1bM046CJQCc6tdgdkUA2OOelvlRspgr8K7x7 PmXjn7bG9km6PM+DMLkqoGSHiUay1ksXZ3w2VtcqLYJOCR7sofTs52vtEH0UMB1MfQ5FC/JmNMUIFP t7I00aNgWfuZbizrJSrmxVwJsu2BM29JbewS3Pk/nu9KP5m4XL9sqlNUIKtg== X-Developer-Key: i=neil.armstrong@linaro.org; a=openpgp; fpr=89EC3D058446217450F22848169AB7B1A4CFF8AE Add Hardware nodes that depends on an interconnect property to be valid. The includes: - all QUP i2s/spi nodes - PCIe - UFS - SDHCI - Display - HWMON Acked-by: Konrad Dybcio Signed-off-by: Neil Armstrong --- arch/arm64/boot/dts/qcom/sm8650.dtsi | 3467 +++++++++++++++++++++++++++++++--- 1 file changed, 3206 insertions(+), 261 deletions(-) diff --git a/arch/arm64/boot/dts/qcom/sm8650.dtsi b/arch/arm64/boot/dts/qcom/sm8650.dtsi index e6a862230c30..8e21335073bc 100644 --- a/arch/arm64/boot/dts/qcom/sm8650.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8650.dtsi @@ -11,6 +11,8 @@ #include #include #include +#include +#include #include #include #include @@ -57,6 +59,11 @@ bi_tcxo_ao_div2: bi-tcxo-ao-div2-clk { clock-mult = <1>; clock-div = <2>; }; + + pcie_1_phy_aux_clk: pcie-1-phy-aux-clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + }; }; cpus { @@ -363,9 +370,23 @@ CLUSTER_SLEEP_1: cluster-sleep-1 { firmware { scm: scm { compatible = "qcom,scm-sm8650", "qcom,scm"; + interconnects = <&aggre2_noc MASTER_CRYPTO QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; }; }; + clk_virt: interconnect-0 { + compatible = "qcom,sm8650-clk-virt"; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + mc_virt: interconnect-1 { + compatible = "qcom,sm8650-mc-virt"; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + memory@a0000000 { device_type = "memory"; /* We expect the bootloader to fill in the size */ @@ -626,6 +647,95 @@ llcc_lpi_mem: llcc-lpi@ff800000 { }; }; + smp2p-adsp { + compatible = "qcom,smp2p"; + + interrupts-extended = <&ipcc IPCC_CLIENT_LPASS + IPCC_MPROC_SIGNAL_SMP2P + IRQ_TYPE_EDGE_RISING>; + + mboxes = <&ipcc IPCC_CLIENT_LPASS + IPCC_MPROC_SIGNAL_SMP2P>; + + qcom,smem = <443>, <429>; + qcom,local-pid = <0>; + qcom,remote-pid = <2>; + + smp2p_adsp_out: master-kernel { + qcom,entry-name = "master-kernel"; + #qcom,smem-state-cells = <1>; + }; + + smp2p_adsp_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + smp2p-cdsp { + compatible = "qcom,smp2p"; + + interrupts-extended = <&ipcc IPCC_CLIENT_CDSP + IPCC_MPROC_SIGNAL_SMP2P + IRQ_TYPE_EDGE_RISING>; + + mboxes = <&ipcc IPCC_CLIENT_CDSP + IPCC_MPROC_SIGNAL_SMP2P>; + + qcom,smem = <94>, <432>; + qcom,local-pid = <0>; + qcom,remote-pid = <5>; + + smp2p_cdsp_out: master-kernel { + qcom,entry-name = "master-kernel"; + #qcom,smem-state-cells = <1>; + }; + + smp2p_cdsp_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + smp2p-modem { + compatible = "qcom,smp2p"; + + interrupts-extended = <&ipcc IPCC_CLIENT_MPSS + IPCC_MPROC_SIGNAL_SMP2P + IRQ_TYPE_EDGE_RISING>; + + mboxes = <&ipcc IPCC_CLIENT_MPSS + IPCC_MPROC_SIGNAL_SMP2P>; + + qcom,smem = <435>, <428>; + qcom,local-pid = <0>; + qcom,remote-pid = <1>; + + smp2p_modem_out: master-kernel { + qcom,entry-name = "master-kernel"; + #qcom,smem-state-cells = <1>; + }; + + smp2p_modem_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + interrupt-controller; + #interrupt-cells = <2>; + }; + + ipa_smp2p_out: ipa-ap-to-modem { + qcom,entry-name = "ipa"; + #qcom,smem-state-cells = <1>; + }; + + ipa_smp2p_in: ipa-modem-to-ap { + qcom,entry-name = "ipa"; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + soc: soc@0 { compatible = "simple-bus"; @@ -641,13 +751,13 @@ gcc: clock-controller@100000 { clocks = <&bi_tcxo_div2>, <&bi_tcxo_ao_div2>, <&sleep_clk>, - <0>, - <0>, - <0>, - <0>, - <0>, - <0>, - <0>; + <&pcie0_phy>, + <&pcie1_phy>, + <&pcie_1_phy_aux_clk>, + <&ufs_mem_phy 0>, + <&ufs_mem_phy 1>, + <&ufs_mem_phy 2>, + <&usb_dp_qmpphy QMP_USB43DP_USB3_PIPE_CLK>; #clock-cells = <1>; #reset-cells = <1>; @@ -712,234 +822,2310 @@ qupv3_id_1: geniqup@8c0000 { status = "disabled"; - uart15: serial@89c000 { - compatible = "qcom,geni-debug-uart"; - reg = <0 0x0089c000 0 0x4000>; + i2c8: i2c@880000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00880000 0 0x4000>; - interrupts = ; + interrupts = ; - clocks = <&gcc GCC_QUPV3_WRAP2_S7_CLK>; + clocks = <&gcc GCC_QUPV3_WRAP2_S0_CLK>; clock-names = "se"; - pinctrl-0 = <&qup_uart15_default>; + interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>, + <&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + + dmas = <&gpi_dma2 0 0 QCOM_GPI_I2C>, + <&gpi_dma2 1 0 QCOM_GPI_I2C>; + dma-names = "tx", + "rx"; + + pinctrl-0 = <&qup_i2c8_data_clk>; pinctrl-names = "default"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; }; - }; - gpi_dma1: dma-controller@a00000 { - compatible = "qcom,sm8650-gpi-dma", "qcom,sm6350-gpi-dma"; - reg = <0 0x00a00000 0 0x60000>; + spi8: spi@880000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00880000 0 0x4000>; - interrupts = , - , - , - , - , - , - , - , - , - , - , - ; + interrupts = ; - dma-channels = <12>; - dma-channel-mask = <0xc>; - #dma-cells = <3>; + clocks = <&gcc GCC_QUPV3_WRAP2_S0_CLK>; + clock-names = "se"; - iommus = <&apps_smmu 0xb6 0>; - dma-coherent; + interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>, + <&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + + dmas = <&gpi_dma2 0 0 QCOM_GPI_SPI>, + <&gpi_dma2 1 0 QCOM_GPI_SPI>; + dma-names = "tx", + "rx"; + + pinctrl-0 = <&qup_spi8_data_clk>, <&qup_spi8_cs>; + pinctrl-names = "default"; - status = "disabled"; - }; + #address-cells = <1>; + #size-cells = <0>; - rng: rng@10c3000 { - compatible = "qcom,sm8650-trng", "qcom,trng"; - reg = <0 0x010c3000 0 0x1000>; - }; + status = "disabled"; + }; - ice: crypto@1d88000 { - compatible = "qcom,sm8650-inline-crypto-engine", - "qcom,inline-crypto-engine"; - reg = <0 0x01d88000 0 0x8000>; + i2c9: i2c@884000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00884000 0 0x4000>; - clocks = <&gcc GCC_UFS_PHY_ICE_CORE_CLK>; - }; + interrupts = ; - tcsr_mutex: hwlock@1f40000 { - compatible = "qcom,tcsr-mutex"; - reg = <0 0x01f40000 0 0x20000>; + clocks = <&gcc GCC_QUPV3_WRAP2_S1_CLK>; + clock-names = "se"; - #hwlock-cells = <1>; - }; + interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>, + <&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + + dmas = <&gpi_dma2 0 1 QCOM_GPI_I2C>, + <&gpi_dma2 1 1 QCOM_GPI_I2C>; + dma-names = "tx", + "rx"; + + pinctrl-0 = <&qup_i2c9_data_clk>; + pinctrl-names = "default"; - tcsr: clock-controller@1fc0000 { - compatible = "qcom,sm8650-tcsr", "syscon"; - reg = <0 0x01fc0000 0 0xa0000>; + #address-cells = <1>; + #size-cells = <0>; - clocks = <&rpmhcc RPMH_CXO_CLK>; + status = "disabled"; + }; - #clock-cells = <1>; - #reset-cells = <1>; - }; + spi9: spi@884000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00884000 0 0x4000>; - gpucc: clock-controller@3d90000 { - compatible = "qcom,sm8650-gpucc"; - reg = <0 0x03d90000 0 0xa000>; + interrupts = ; - clocks = <&bi_tcxo_div2>, - <&gcc GCC_GPU_GPLL0_CLK_SRC>, - <&gcc GCC_GPU_GPLL0_DIV_CLK_SRC>; + clocks = <&gcc GCC_QUPV3_WRAP2_S1_CLK>; + clock-names = "se"; - #clock-cells = <1>; - #reset-cells = <1>; - #power-domain-cells = <1>; - }; + interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>, + <&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + + dmas = <&gpi_dma2 0 1 QCOM_GPI_SPI>, + <&gpi_dma2 1 1 QCOM_GPI_SPI>; + dma-names = "tx", + "rx"; + + pinctrl-0 = <&qup_spi9_data_clk>, <&qup_spi9_cs>; + pinctrl-names = "default"; - dispcc: clock-controller@af00000 { - compatible = "qcom,sm8650-dispcc"; - reg = <0 0x0af00000 0 0x20000>; + #address-cells = <1>; + #size-cells = <0>; - clocks = <&bi_tcxo_div2>, - <&bi_tcxo_ao_div2>, - <&gcc GCC_DISP_AHB_CLK>, - <&sleep_clk>, - <0>, /* dsi0 */ - <0>, - <0>, /* dsi1 */ - <0>, - <0>, /* dp0 */ - <0>, - <0>, /* dp1 */ - <0>, - <0>, /* dp2 */ - <0>, - <0>, /* dp3 */ - <0>; + status = "disabled"; + }; - power-domains = <&rpmhpd RPMHPD_MMCX>; - required-opps = <&rpmhpd_opp_low_svs>; + i2c10: i2c@888000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00888000 0 0x4000>; - #clock-cells = <1>; - #reset-cells = <1>; - #power-domain-cells = <1>; + interrupts = ; - status = "disabled"; - }; + clocks = <&gcc GCC_QUPV3_WRAP2_S2_CLK>; + clock-names = "se"; - usb_1_hsphy: phy@88e3000 { - compatible = "qcom,sm8650-snps-eusb2-phy", - "qcom,sm8550-snps-eusb2-phy"; - reg = <0 0x088e3000 0 0x154>; + interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>, + <&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + + dmas = <&gpi_dma2 0 2 QCOM_GPI_I2C>, + <&gpi_dma2 1 2 QCOM_GPI_I2C>; + dma-names = "tx", + "rx"; + + pinctrl-0 = <&qup_i2c10_data_clk>; + pinctrl-names = "default"; - clocks = <&tcsr TCSR_USB2_CLKREF_EN>; - clock-names = "ref"; + #address-cells = <1>; + #size-cells = <0>; - resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>; + status = "disabled"; + }; - #phy-cells = <0>; + spi10: spi@888000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00888000 0 0x4000>; - status = "disabled"; - }; + interrupts = ; - usb_dp_qmpphy: phy@88e8000 { - compatible = "qcom,sm8650-qmp-usb3-dp-phy"; - reg = <0 0x088e8000 0 0x3000>; + clocks = <&gcc GCC_QUPV3_WRAP2_S2_CLK>; + clock-names = "se"; - clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>, - <&rpmhcc RPMH_CXO_CLK>, - <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>, - <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>; - clock-names = "aux", - "ref", - "com_aux", - "usb3_pipe"; + interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>, + <&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + + dmas = <&gpi_dma2 0 2 QCOM_GPI_SPI>, + <&gpi_dma2 1 2 QCOM_GPI_SPI>; + dma-names = "tx", + "rx"; + + pinctrl-0 = <&qup_spi10_data_clk>, <&qup_spi10_cs>; + pinctrl-names = "default"; - resets = <&gcc GCC_USB3_PHY_PRIM_BCR>, - <&gcc GCC_USB3_DP_PHY_PRIM_BCR>; - reset-names = "phy", - "common"; + #address-cells = <1>; + #size-cells = <0>; - power-domains = <&gcc USB3_PHY_GDSC>; + status = "disabled"; + }; - #clock-cells = <1>; - #phy-cells = <1>; + i2c11: i2c@88c000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x0088c000 0 0x4000>; - status = "disabled"; - }; + interrupts = ; - usb_1: usb@a6f8800 { - compatible = "qcom,sm8650-dwc3", "qcom,dwc3"; - reg = <0 0x0a6f8800 0 0x400>; + clocks = <&gcc GCC_QUPV3_WRAP2_S3_CLK>; + clock-names = "se"; - interrupts-extended = <&intc GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>, - <&pdc 17 IRQ_TYPE_LEVEL_HIGH>, - <&pdc 15 IRQ_TYPE_EDGE_RISING>, - <&pdc 14 IRQ_TYPE_EDGE_RISING>; - interrupt-names = "hs_phy_irq", - "ss_phy_irq", - "dm_hs_phy_irq", - "dp_hs_phy_irq"; + interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>, + <&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + + dmas = <&gpi_dma2 0 3 QCOM_GPI_I2C>, + <&gpi_dma2 1 3 QCOM_GPI_I2C>; + dma-names = "tx", + "rx"; + + pinctrl-0 = <&qup_i2c11_data_clk>; + pinctrl-names = "default"; - clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>, - <&gcc GCC_USB30_PRIM_MASTER_CLK>, - <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>, - <&gcc GCC_USB30_PRIM_SLEEP_CLK>, - <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>, - <&tcsr TCSR_USB3_CLKREF_EN>; - clock-names = "cfg_noc", - "core", - "iface", - "sleep", - "mock_utmi", - "xo"; + #address-cells = <1>; + #size-cells = <0>; - assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>, - <&gcc GCC_USB30_PRIM_MASTER_CLK>; - assigned-clock-rates = <19200000>, <200000000>; + status = "disabled"; + }; - resets = <&gcc GCC_USB30_PRIM_BCR>; + spi11: spi@88c000 { + compatible = "qcom,geni-spi"; + reg = <0 0x0088c000 0 0x4000>; - power-domains = <&gcc USB30_PRIM_GDSC>; - required-opps = <&rpmhpd_opp_nom>; + interrupts = ; - #address-cells = <2>; - #size-cells = <2>; - ranges; + clocks = <&gcc GCC_QUPV3_WRAP2_S3_CLK>; + clock-names = "se"; - status = "disabled"; + interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>, + <&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + + dmas = <&gpi_dma2 0 3 QCOM_GPI_SPI>, + <&gpi_dma2 1 3 QCOM_GPI_SPI>; + dma-names = "tx", + "rx"; + + pinctrl-0 = <&qup_spi11_data_clk>, <&qup_spi11_cs>; + pinctrl-names = "default"; - usb_1_dwc3: usb@a600000 { - compatible = "snps,dwc3"; - reg = <0 0x0a600000 0 0xcd00>; + #address-cells = <1>; + #size-cells = <0>; - interrupts = ; + status = "disabled"; + }; - iommus = <&apps_smmu 0x40 0>; + i2c12: i2c@890000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00890000 0 0x4000>; - phys = <&usb_1_hsphy>, - <&usb_dp_qmpphy QMP_USB43DP_USB3_PHY>; - phy-names = "usb2-phy", - "usb3-phy"; + interrupts = ; - snps,hird-threshold = /bits/ 8 <0x0>; - snps,usb2-gadget-lpm-disable; - snps,dis_u2_susphy_quirk; - snps,dis_enblslpm_quirk; - snps,dis-u1-entry-quirk; - snps,dis-u2-entry-quirk; - snps,is-utmi-l1-suspend; - snps,usb3_lpm_capable; - snps,usb2-lpm-disable; - snps,has-lpm-erratum; - tx-fifo-resize; + clocks = <&gcc GCC_QUPV3_WRAP2_S4_CLK>; + clock-names = "se"; - dma-coherent; + interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>, + <&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + + dmas = <&gpi_dma2 0 4 QCOM_GPI_I2C>, + <&gpi_dma2 1 4 QCOM_GPI_I2C>; + dma-names = "tx", + "rx"; + + pinctrl-0 = <&qup_i2c12_data_clk>; + pinctrl-names = "default"; - ports { - #address-cells = <1>; + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + spi12: spi@890000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00890000 0 0x4000>; + + interrupts = ; + + clocks = <&gcc GCC_QUPV3_WRAP2_S4_CLK>; + clock-names = "se"; + + interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>, + <&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + + dmas = <&gpi_dma2 0 4 QCOM_GPI_SPI>, + <&gpi_dma2 1 4 QCOM_GPI_SPI>; + dma-names = "tx", + "rx"; + + pinctrl-0 = <&qup_spi12_data_clk>, <&qup_spi12_cs>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + i2c13: i2c@894000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00894000 0 0x4000>; + + interrupts = ; + + clocks = <&gcc GCC_QUPV3_WRAP2_S5_CLK>; + clock-names = "se"; + + interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>, + <&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + + dmas = <&gpi_dma2 0 5 QCOM_GPI_I2C>, + <&gpi_dma2 1 5 QCOM_GPI_I2C>; + dma-names = "tx", + "rx"; + + pinctrl-0 = <&qup_i2c13_data_clk>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + spi13: spi@894000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00894000 0 0x4000>; + + interrupts = ; + + clocks = <&gcc GCC_QUPV3_WRAP2_S5_CLK>; + clock-names = "se"; + + interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>, + <&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + + dmas = <&gpi_dma2 0 5 QCOM_GPI_SPI>, + <&gpi_dma2 1 5 QCOM_GPI_SPI>; + dma-names = "tx", + "rx"; + + pinctrl-0 = <&qup_spi13_data_clk>, <&qup_spi13_cs>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + uart14: serial@898000 { + compatible = "qcom,geni-uart"; + reg = <0 0x00898000 0 0x4000>; + + interrupts = ; + + clocks = <&gcc GCC_QUPV3_WRAP2_S6_CLK>; + clock-names = "se"; + + interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config"; + + pinctrl-0 = <&qup_uart14_default>, <&qup_uart14_cts_rts>; + pinctrl-names = "default"; + + status = "disabled"; + }; + + uart15: serial@89c000 { + compatible = "qcom,geni-debug-uart"; + reg = <0 0x0089c000 0 0x4000>; + + interrupts = ; + + clocks = <&gcc GCC_QUPV3_WRAP2_S7_CLK>; + clock-names = "se"; + + interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config"; + + pinctrl-0 = <&qup_uart15_default>; + pinctrl-names = "default"; + + status = "disabled"; + }; + }; + + i2c_master_hub_0: geniqup@9c0000 { + compatible = "qcom,geni-se-i2c-master-hub"; + reg = <0 0x009c0000 0 0x2000>; + + clocks = <&gcc GCC_QUPV3_I2C_S_AHB_CLK>; + clock-names = "s-ahb"; + + #address-cells = <2>; + #size-cells = <2>; + ranges; + + status = "disabled"; + + i2c_hub_0: i2c@980000 { + compatible = "qcom,geni-i2c-master-hub"; + reg = <0 0x00980000 0 0x4000>; + + interrupts = ; + + clocks = <&gcc GCC_QUPV3_I2C_S0_CLK>, + <&gcc GCC_QUPV3_I2C_CORE_CLK>; + clock-names = "se", + "core"; + + interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_I2C QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config"; + + pinctrl-0 = <&hub_i2c0_data_clk>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + i2c_hub_1: i2c@984000 { + compatible = "qcom,geni-i2c-master-hub"; + reg = <0 0x00984000 0 0x4000>; + + interrupts = ; + + clocks = <&gcc GCC_QUPV3_I2C_S1_CLK>, + <&gcc GCC_QUPV3_I2C_CORE_CLK>; + clock-names = "se", + "core"; + + interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_I2C QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config"; + + pinctrl-0 = <&hub_i2c1_data_clk>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + i2c_hub_2: i2c@988000 { + compatible = "qcom,geni-i2c-master-hub"; + reg = <0 0x00988000 0 0x4000>; + + interrupts = ; + + clocks = <&gcc GCC_QUPV3_I2C_S2_CLK>, + <&gcc GCC_QUPV3_I2C_CORE_CLK>; + clock-names = "se", + "core"; + + interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_I2C QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config"; + + pinctrl-0 = <&hub_i2c2_data_clk>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + i2c_hub_3: i2c@98c000 { + compatible = "qcom,geni-i2c-master-hub"; + reg = <0 0x0098c000 0 0x4000>; + + interrupts = ; + + clocks = <&gcc GCC_QUPV3_I2C_S3_CLK>, + <&gcc GCC_QUPV3_I2C_CORE_CLK>; + clock-names = "se", + "core"; + + interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_I2C QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config"; + + pinctrl-0 = <&hub_i2c3_data_clk>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + i2c_hub_4: i2c@990000 { + compatible = "qcom,geni-i2c-master-hub"; + reg = <0 0x00990000 0 0x4000>; + + interrupts = ; + + clocks = <&gcc GCC_QUPV3_I2C_S4_CLK>, + <&gcc GCC_QUPV3_I2C_CORE_CLK>; + clock-names = "se", + "core"; + + interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_I2C QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config"; + + pinctrl-0 = <&hub_i2c4_data_clk>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + i2c_hub_5: i2c@994000 { + compatible = "qcom,geni-i2c-master-hub"; + reg = <0 0x00994000 0 0x4000>; + + interrupts = ; + + clocks = <&gcc GCC_QUPV3_I2C_S5_CLK>, + <&gcc GCC_QUPV3_I2C_CORE_CLK>; + clock-names = "se", + "core"; + + interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_I2C QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config"; + + pinctrl-0 = <&hub_i2c5_data_clk>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + i2c_hub_6: i2c@998000 { + compatible = "qcom,geni-i2c-master-hub"; + reg = <0 0x00998000 0 0x4000>; + + interrupts = ; + + clocks = <&gcc GCC_QUPV3_I2C_S6_CLK>, + <&gcc GCC_QUPV3_I2C_CORE_CLK>; + clock-names = "se", + "core"; + + interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_I2C QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config"; + + pinctrl-0 = <&hub_i2c6_data_clk>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + i2c_hub_7: i2c@99c000 { + compatible = "qcom,geni-i2c-master-hub"; + reg = <0 0x0099c000 0 0x4000>; + + interrupts = ; + + clocks = <&gcc GCC_QUPV3_I2C_S7_CLK>, + <&gcc GCC_QUPV3_I2C_CORE_CLK>; + clock-names = "se", + "core"; + + interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_I2C QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config"; + + pinctrl-0 = <&hub_i2c7_data_clk>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + i2c_hub_8: i2c@9a0000 { + compatible = "qcom,geni-i2c-master-hub"; + reg = <0 0x009a0000 0 0x4000>; + + interrupts = ; + + clocks = <&gcc GCC_QUPV3_I2C_S8_CLK>, + <&gcc GCC_QUPV3_I2C_CORE_CLK>; + clock-names = "se", + "core"; + + interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_I2C QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config"; + + pinctrl-0 = <&hub_i2c8_data_clk>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + i2c_hub_9: i2c@9a4000 { + compatible = "qcom,geni-i2c-master-hub"; + reg = <0 0x009a4000 0 0x4000>; + + interrupts = ; + + clocks = <&gcc GCC_QUPV3_I2C_S9_CLK>, + <&gcc GCC_QUPV3_I2C_CORE_CLK>; + clock-names = "se", + "core"; + + interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_I2C QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config"; + + pinctrl-0 = <&hub_i2c9_data_clk>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + }; + + gpi_dma1: dma-controller@a00000 { + compatible = "qcom,sm8650-gpi-dma", "qcom,sm6350-gpi-dma"; + reg = <0 0x00a00000 0 0x60000>; + + interrupts = , + , + , + , + , + , + , + , + , + , + , + ; + + dma-channels = <12>; + dma-channel-mask = <0xc>; + #dma-cells = <3>; + + iommus = <&apps_smmu 0xb6 0>; + dma-coherent; + + status = "disabled"; + }; + + qupv3_id_0: geniqup@ac0000 { + compatible = "qcom,geni-se-qup"; + reg = <0 0x00ac0000 0 0x2000>; + + clocks = <&gcc GCC_QUPV3_WRAP_1_M_AHB_CLK>, + <&gcc GCC_QUPV3_WRAP_1_S_AHB_CLK>; + clock-names = "m-ahb", + "s-ahb"; + + interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core"; + + iommus = <&apps_smmu 0xa3 0>; + + dma-coherent; + + #address-cells = <2>; + #size-cells = <2>; + ranges; + + status = "disabled"; + + i2c0: i2c@a80000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00a80000 0 0x4000>; + + interrupts = ; + + clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>; + clock-names = "se"; + + interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>, + <&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + + dmas = <&gpi_dma1 0 0 QCOM_GPI_I2C>, + <&gpi_dma1 1 0 QCOM_GPI_I2C>; + dma-names = "tx", + "rx"; + + pinctrl-0 = <&qup_i2c0_data_clk>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + spi0: spi@a80000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00a80000 0 0x4000>; + + interrupts = ; + + clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>; + clock-names = "se"; + + interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>, + <&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + + dmas = <&gpi_dma1 0 0 QCOM_GPI_SPI>, + <&gpi_dma1 1 0 QCOM_GPI_SPI>; + dma-names = "tx", + "rx"; + + pinctrl-0 = <&qup_spi0_data_clk>, <&qup_spi0_cs>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + i2c1: i2c@a84000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00a84000 0 0x4000>; + + interrupts = ; + + clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>; + clock-names = "se"; + + interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>, + <&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + + dmas = <&gpi_dma1 0 1 QCOM_GPI_I2C>, + <&gpi_dma1 1 1 QCOM_GPI_I2C>; + dma-names = "tx", + "rx"; + + pinctrl-0 = <&qup_i2c1_data_clk>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + spi1: spi@a84000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00a84000 0 0x4000>; + + interrupts = ; + + clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>; + clock-names = "se"; + + interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>, + <&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + + dmas = <&gpi_dma1 0 1 QCOM_GPI_SPI>, + <&gpi_dma1 1 1 QCOM_GPI_SPI>; + dma-names = "tx", + "rx"; + + pinctrl-0 = <&qup_spi1_data_clk>, <&qup_spi1_cs>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + i2c2: i2c@a88000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00a88000 0 0x4000>; + + interrupts = ; + + clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>; + clock-names = "se"; + + interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>, + <&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + + dmas = <&gpi_dma1 0 2 QCOM_GPI_I2C>, + <&gpi_dma1 1 2 QCOM_GPI_I2C>; + dma-names = "tx", + "rx"; + + pinctrl-0 = <&qup_i2c2_data_clk>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + spi2: spi@a88000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00a88000 0 0x4000>; + + interrupts = ; + + clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>; + clock-names = "se"; + + interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>, + <&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + + dmas = <&gpi_dma1 0 2 QCOM_GPI_SPI>, + <&gpi_dma1 1 2 QCOM_GPI_SPI>; + dma-names = "tx", + "rx"; + + pinctrl-0 = <&qup_spi2_data_clk>, <&qup_spi2_cs>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + i2c3: i2c@a8c000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00a8c000 0 0x4000>; + + interrupts = ; + + clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>; + clock-names = "se"; + + interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>, + <&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + + dmas = <&gpi_dma1 0 3 QCOM_GPI_I2C>, + <&gpi_dma1 1 3 QCOM_GPI_I2C>; + dma-names = "tx", + "rx"; + + pinctrl-0 = <&qup_i2c3_data_clk>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + spi3: spi@a8c000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00a8c000 0 0x4000>; + + interrupts = ; + + clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>; + clock-names = "se"; + + interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>, + <&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + + dmas = <&gpi_dma1 0 3 QCOM_GPI_SPI>, + <&gpi_dma1 1 3 QCOM_GPI_SPI>; + dma-names = "tx", + "rx"; + + pinctrl-0 = <&qup_spi3_data_clk>, <&qup_spi3_cs>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + i2c4: i2c@a90000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00a90000 0 0x4000>; + + interrupts = ; + + clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>; + clock-names = "se"; + + interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>, + <&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + + dmas = <&gpi_dma1 0 4 QCOM_GPI_I2C>, + <&gpi_dma1 1 4 QCOM_GPI_I2C>; + dma-names = "tx", + "rx"; + + pinctrl-0 = <&qup_i2c4_data_clk>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + spi4: spi@a90000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00a90000 0 0x4000>; + + interrupts = ; + + clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>; + clock-names = "se"; + + interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>, + <&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + + dmas = <&gpi_dma1 0 4 QCOM_GPI_SPI>, + <&gpi_dma1 1 4 QCOM_GPI_SPI>; + dma-names = "tx", + "rx"; + + pinctrl-0 = <&qup_spi4_data_clk>, <&qup_spi4_cs>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + i2c5: i2c@a94000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00a94000 0 0x4000>; + + interrupts = ; + + clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>; + clock-names = "se"; + + interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>, + <&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + + dmas = <&gpi_dma1 0 5 QCOM_GPI_I2C>, + <&gpi_dma1 1 5 QCOM_GPI_I2C>; + dma-names = "tx", + "rx"; + + pinctrl-0 = <&qup_i2c5_data_clk>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + spi5: spi@a94000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00a94000 0 0x4000>; + + interrupts = ; + + clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>; + clock-names = "se"; + + interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>, + <&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + + dmas = <&gpi_dma1 0 5 QCOM_GPI_SPI>, + <&gpi_dma1 1 5 QCOM_GPI_SPI>; + dma-names = "tx", + "rx"; + + pinctrl-0 = <&qup_spi5_data_clk>, <&qup_spi5_cs>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + i2c6: i2c@a98000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00a98000 0 0x4000>; + + interrupts = ; + + clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>; + clock-names = "se"; + + interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>, + <&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + + dmas = <&gpi_dma1 0 6 QCOM_GPI_I2C>, + <&gpi_dma1 1 6 QCOM_GPI_I2C>; + dma-names = "tx", + "rx"; + + pinctrl-0 = <&qup_i2c6_data_clk>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + spi6: spi@a98000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00a98000 0 0x4000>; + + interrupts = ; + + clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>; + clock-names = "se"; + + interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>, + <&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + + dmas = <&gpi_dma1 0 6 QCOM_GPI_SPI>, + <&gpi_dma1 1 6 QCOM_GPI_SPI>; + dma-names = "tx", + "rx"; + + pinctrl-0 = <&qup_spi6_data_clk>, <&qup_spi6_cs>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + i2c7: i2c@a9c000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00a9c000 0 0x4000>; + + interrupts = ; + + clocks = <&gcc GCC_QUPV3_WRAP1_S7_CLK>; + clock-names = "se"; + + interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>, + <&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + + dmas = <&gpi_dma1 0 7 QCOM_GPI_I2C>, + <&gpi_dma1 1 7 QCOM_GPI_I2C>; + dma-names = "tx", + "rx"; + + pinctrl-0 = <&qup_i2c7_data_clk>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + spi7: spi@a9c000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00a9c000 0 0x4000>; + + interrupts = ; + + clocks = <&gcc GCC_QUPV3_WRAP1_S7_CLK>; + clock-names = "se"; + + interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>, + <&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + + dmas = <&gpi_dma1 0 7 QCOM_GPI_SPI>, + <&gpi_dma1 1 7 QCOM_GPI_SPI>; + dma-names = "tx", + "rx"; + + pinctrl-0 = <&qup_spi7_data_clk>, <&qup_spi7_cs>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + }; + + cnoc_main: interconnect@1500000 { + compatible = "qcom,sm8650-cnoc-main"; + reg = <0 0x01500000 0 0x14080>; + + qcom,bcm-voters = <&apps_bcm_voter>; + + #interconnect-cells = <2>; + }; + + config_noc: interconnect@1600000 { + compatible = "qcom,sm8650-config-noc"; + reg = <0 0x01600000 0 0x6200>; + + qcom,bcm-voters = <&apps_bcm_voter>; + + #interconnect-cells = <2>; + }; + + system_noc: interconnect@1680000 { + compatible = "qcom,sm8650-system-noc"; + reg = <0 0x01680000 0 0x1d080>; + + qcom,bcm-voters = <&apps_bcm_voter>; + + #interconnect-cells = <2>; + }; + + pcie_noc: interconnect@16c0000 { + compatible = "qcom,sm8650-pcie-anoc"; + reg = <0 0x016c0000 0 0x12200>; + + clocks = <&gcc GCC_AGGRE_NOC_PCIE_AXI_CLK>, + <&gcc GCC_CFG_NOC_PCIE_ANOC_AHB_CLK>; + + qcom,bcm-voters = <&apps_bcm_voter>; + + #interconnect-cells = <2>; + }; + + aggre1_noc: interconnect@16e0000 { + compatible = "qcom,sm8650-aggre1-noc"; + reg = <0 0x016e0000 0 0x16400>; + + clocks = <&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>, + <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>; + + qcom,bcm-voters = <&apps_bcm_voter>; + + #interconnect-cells = <2>; + }; + + aggre2_noc: interconnect@1700000 { + compatible = "qcom,sm8650-aggre2-noc"; + reg = <0 0x01700000 0 0x1e400>; + + clocks = <&rpmhcc RPMH_IPA_CLK>; + + qcom,bcm-voters = <&apps_bcm_voter>; + + #interconnect-cells = <2>; + }; + + mmss_noc: interconnect@1780000 { + compatible = "qcom,sm8650-mmss-noc"; + reg = <0 0x01780000 0 0x5b800>; + + qcom,bcm-voters = <&apps_bcm_voter>; + + #interconnect-cells = <2>; + }; + + rng: rng@10c3000 { + compatible = "qcom,sm8650-trng", "qcom,trng"; + reg = <0 0x010c3000 0 0x1000>; + }; + + pcie0: pci@1c00000 { + device_type = "pci"; + compatible = "qcom,pcie-sm8650", "qcom,pcie-sm8550"; + reg = <0 0x01c00000 0 0x3000>, + <0 0x60000000 0 0xf1d>, + <0 0x60000f20 0 0xa8>, + <0 0x60001000 0 0x1000>, + <0 0x60100000 0 0x100000>; + reg-names = "parf", "dbi", "elbi", "atu", "config"; + + interrupts = ; + interrupt-names = "msi"; + + clocks = <&gcc GCC_PCIE_0_AUX_CLK>, + <&gcc GCC_PCIE_0_CFG_AHB_CLK>, + <&gcc GCC_PCIE_0_MSTR_AXI_CLK>, + <&gcc GCC_PCIE_0_SLV_AXI_CLK>, + <&gcc GCC_PCIE_0_SLV_Q2A_AXI_CLK>, + <&gcc GCC_DDRSS_PCIE_SF_QTB_CLK>, + <&gcc GCC_AGGRE_NOC_PCIE_AXI_CLK>, + <&gcc GCC_CNOC_PCIE_SF_AXI_CLK>; + clock-names = "aux", + "cfg", + "bus_master", + "bus_slave", + "slave_q2a", + "ddrss_sf_tbu", + "noc_aggr", + "cnoc_sf_axi"; + + resets = <&gcc GCC_PCIE_0_BCR>; + reset-names = "pci"; + + interconnects = <&pcie_noc MASTER_PCIE_0 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &cnoc_main SLAVE_PCIE_0 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "pcie-mem", + "cpu-pcie"; + + power-domains = <&gcc PCIE_0_GDSC>; + + iommu-map = <0 &apps_smmu 0x1400 0x1>, + <0x100 &apps_smmu 0x1401 0x1>; + + interrupt-map = <0 0 0 1 &intc 0 0 0 149 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 2 &intc 0 0 0 150 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 3 &intc 0 0 0 151 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 4 &intc 0 0 0 152 IRQ_TYPE_LEVEL_HIGH>; + interrupt-map-mask = <0 0 0 0x7>; + #interrupt-cells = <1>; + + linux,pci-domain = <0>; + num-lanes = <2>; + bus-range = <0 0xff>; + + phys = <&pcie0_phy>; + phy-names = "pciephy"; + + #address-cells = <3>; + #size-cells = <2>; + ranges = <0x01000000 0 0x00000000 0 0x60200000 0 0x100000>, + <0x02000000 0 0x60300000 0 0x60300000 0 0x3d00000>; + + dma-coherent; + + status = "disabled"; + }; + + pcie0_phy: phy@1c06000 { + compatible = "qcom,sm8650-qmp-gen3x2-pcie-phy"; + reg = <0 0x01c06000 0 0x2000>; + + clocks = <&gcc GCC_PCIE_0_AUX_CLK>, + <&gcc GCC_PCIE_0_CFG_AHB_CLK>, + <&tcsr TCSR_PCIE_0_CLKREF_EN>, + <&gcc GCC_PCIE_0_PHY_RCHNG_CLK>, + <&gcc GCC_PCIE_0_PIPE_CLK>; + clock-names = "aux", + "cfg_ahb", + "ref", + "rchng", + "pipe"; + + assigned-clocks = <&gcc GCC_PCIE_0_PHY_RCHNG_CLK>; + assigned-clock-rates = <100000000>; + + resets = <&gcc GCC_PCIE_0_PHY_BCR>; + reset-names = "phy"; + + power-domains = <&gcc PCIE_0_PHY_GDSC>; + + #clock-cells = <0>; + clock-output-names = "pcie0_pipe_clk"; + + #phy-cells = <0>; + + status = "disabled"; + }; + + pcie1: pci@1c08000 { + device_type = "pci"; + compatible = "qcom,pcie-sm8650", "qcom,pcie-sm8550"; + reg = <0 0x01c08000 0 0x3000>, + <0 0x40000000 0 0xf1d>, + <0 0x40000f20 0 0xa8>, + <0 0x40001000 0 0x1000>, + <0 0x40100000 0 0x100000>; + reg-names = "parf", + "dbi", + "elbi", + "atu", + "config"; + + interrupts = ; + interrupt-names = "msi"; + + clocks = <&gcc GCC_PCIE_1_AUX_CLK>, + <&gcc GCC_PCIE_1_CFG_AHB_CLK>, + <&gcc GCC_PCIE_1_MSTR_AXI_CLK>, + <&gcc GCC_PCIE_1_SLV_AXI_CLK>, + <&gcc GCC_PCIE_1_SLV_Q2A_AXI_CLK>, + <&gcc GCC_DDRSS_PCIE_SF_QTB_CLK>, + <&gcc GCC_AGGRE_NOC_PCIE_AXI_CLK>, + <&gcc GCC_CNOC_PCIE_SF_AXI_CLK>; + clock-names = "aux", + "cfg", + "bus_master", + "bus_slave", + "slave_q2a", + "ddrss_sf_tbu", + "noc_aggr", + "cnoc_sf_axi"; + + assigned-clocks = <&gcc GCC_PCIE_1_AUX_CLK>; + assigned-clock-rates = <19200000>; + + resets = <&gcc GCC_PCIE_1_BCR>, + <&gcc GCC_PCIE_1_LINK_DOWN_BCR>; + reset-names = "pci", + "link_down"; + + interconnects = <&pcie_noc MASTER_PCIE_1 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &cnoc_main SLAVE_PCIE_1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "pcie-mem", + "cpu-pcie"; + + power-domains = <&gcc PCIE_1_GDSC>; + + iommu-map = <0 &apps_smmu 0x1480 0x1>, + <0x100 &apps_smmu 0x1481 0x1>; + + interrupt-map = <0 0 0 1 &intc 0 0 0 434 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 2 &intc 0 0 0 435 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 3 &intc 0 0 0 438 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 4 &intc 0 0 0 439 IRQ_TYPE_LEVEL_HIGH>; + interrupt-map-mask = <0 0 0 0x7>; + #interrupt-cells = <1>; + + linux,pci-domain = <1>; + num-lanes = <2>; + bus-range = <0 0xff>; + + phys = <&pcie1_phy>; + phy-names = "pciephy"; + + dma-coherent; + + #address-cells = <3>; + #size-cells = <2>; + ranges = <0x01000000 0 0x00000000 0 0x40200000 0 0x100000>, + <0x02000000 0 0x40300000 0 0x40300000 0 0x1fd00000>; + + status = "disabled"; + }; + + pcie1_phy: phy@1c0e000 { + compatible = "qcom,sm8650-qmp-gen4x2-pcie-phy"; + reg = <0 0x01c0e000 0 0x2000>; + + clocks = <&gcc GCC_PCIE_1_PHY_AUX_CLK>, + <&gcc GCC_PCIE_1_CFG_AHB_CLK>, + <&tcsr TCSR_PCIE_1_CLKREF_EN>, + <&gcc GCC_PCIE_1_PHY_RCHNG_CLK>, + <&gcc GCC_PCIE_1_PIPE_CLK>; + clock-names = "aux", + "cfg_ahb", + "ref", + "rchng", + "pipe"; + + assigned-clocks = <&gcc GCC_PCIE_1_PHY_RCHNG_CLK>; + assigned-clock-rates = <100000000>; + + resets = <&gcc GCC_PCIE_1_PHY_BCR>, + <&gcc GCC_PCIE_1_NOCSR_COM_PHY_BCR>; + reset-names = "phy", + "phy_nocsr"; + + power-domains = <&gcc PCIE_1_PHY_GDSC>; + + #clock-cells = <0>; + clock-output-names = "pcie1_pipe_clk"; + + #phy-cells = <0>; + + status = "disabled"; + }; + + cryptobam: dma-controller@1dc4000 { + compatible = "qcom,bam-v1.7.0"; + reg = <0 0x01dc4000 0 0x28000>; + + interrupts = ; + + #dma-cells = <1>; + + iommus = <&apps_smmu 0x480 0>, + <&apps_smmu 0x481 0>; + + qcom,ee = <0>; + qcom,controlled-remotely; + }; + + crypto: crypto@1dfa000 { + compatible = "qcom,sm8650-qce", "qcom,sm8150-qce", "qcom,qce"; + reg = <0 0x01dfa000 0 0x6000>; + + interconnects = <&aggre2_noc MASTER_CRYPTO QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "memory"; + + dmas = <&cryptobam 4>, <&cryptobam 5>; + dma-names = "rx", "tx"; + + iommus = <&apps_smmu 0x480 0>, + <&apps_smmu 0x481 0>; + }; + + ufs_mem_phy: phy@1d80000 { + compatible = "qcom,sm8650-qmp-ufs-phy"; + reg = <0 0x01d80000 0 0x2000>; + + clocks = <&tcsr TCSR_UFS_CLKREF_EN>, + <&gcc GCC_UFS_PHY_PHY_AUX_CLK>; + clock-names = "ref", + "ref_aux"; + + resets = <&ufs_mem_hc 0>; + reset-names = "ufsphy"; + + power-domains = <&gcc UFS_MEM_PHY_GDSC>; + + #clock-cells = <1>; + #phy-cells = <0>; + + status = "disabled"; + }; + + ufs_mem_hc: ufs@1d84000 { + compatible = "qcom,sm8650-ufshc", "qcom,ufshc", "jedec,ufs-2.0"; + reg = <0 0x01d84000 0 0x3000>; + + interrupts = ; + + clocks = <&gcc GCC_UFS_PHY_AXI_CLK>, + <&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>, + <&gcc GCC_UFS_PHY_AHB_CLK>, + <&gcc GCC_UFS_PHY_UNIPRO_CORE_CLK>, + <&tcsr TCSR_UFS_PAD_CLKREF_EN>, + <&gcc GCC_UFS_PHY_TX_SYMBOL_0_CLK>, + <&gcc GCC_UFS_PHY_RX_SYMBOL_0_CLK>, + <&gcc GCC_UFS_PHY_RX_SYMBOL_1_CLK>; + clock-names = "core_clk", + "bus_aggr_clk", + "iface_clk", + "core_clk_unipro", + "ref_clk", + "tx_lane0_sync_clk", + "rx_lane0_sync_clk", + "rx_lane1_sync_clk"; + freq-table-hz = <100000000 403000000>, + <0 0>, + <0 0>, + <100000000 403000000>, + <100000000 403000000>, + <0 0>, + <0 0>, + <0 0>; + + resets = <&gcc GCC_UFS_PHY_BCR>; + reset-names = "rst"; + + interconnects = <&aggre1_noc MASTER_UFS_MEM QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_UFS_MEM_CFG QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "ufs-ddr", + "cpu-ufs"; + + power-domains = <&gcc UFS_PHY_GDSC>; + required-opps = <&rpmhpd_opp_nom>; + + iommus = <&apps_smmu 0x60 0>; + + lanes-per-direction = <2>; + qcom,ice = <&ice>; + + phys = <&ufs_mem_phy>; + phy-names = "ufsphy"; + + #reset-cells = <1>; + + status = "disabled"; + }; + + ice: crypto@1d88000 { + compatible = "qcom,sm8650-inline-crypto-engine", + "qcom,inline-crypto-engine"; + reg = <0 0x01d88000 0 0x8000>; + + clocks = <&gcc GCC_UFS_PHY_ICE_CORE_CLK>; + }; + + tcsr_mutex: hwlock@1f40000 { + compatible = "qcom,tcsr-mutex"; + reg = <0 0x01f40000 0 0x20000>; + + #hwlock-cells = <1>; + }; + + tcsr: clock-controller@1fc0000 { + compatible = "qcom,sm8650-tcsr", "syscon"; + reg = <0 0x01fc0000 0 0xa0000>; + + clocks = <&rpmhcc RPMH_CXO_CLK>; + + #clock-cells = <1>; + #reset-cells = <1>; + }; + + gpucc: clock-controller@3d90000 { + compatible = "qcom,sm8650-gpucc"; + reg = <0 0x03d90000 0 0xa000>; + + clocks = <&bi_tcxo_div2>, + <&gcc GCC_GPU_GPLL0_CLK_SRC>, + <&gcc GCC_GPU_GPLL0_DIV_CLK_SRC>; + + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + }; + + remoteproc_mpss: remoteproc@4080000 { + compatible = "qcom,sm8650-mpss-pas"; + reg = <0 0x04080000 0 0x4040>; + + interrupts-extended = <&intc GIC_SPI 264 IRQ_TYPE_EDGE_RISING>, + <&smp2p_modem_in 0 IRQ_TYPE_EDGE_RISING>, + <&smp2p_modem_in 1 IRQ_TYPE_EDGE_RISING>, + <&smp2p_modem_in 2 IRQ_TYPE_EDGE_RISING>, + <&smp2p_modem_in 3 IRQ_TYPE_EDGE_RISING>, + <&smp2p_modem_in 7 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", + "fatal", + "ready", + "handover", + "stop-ack", + "shutdown-ack"; + + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-names = "xo"; + + interconnects = <&mc_virt MASTER_LLCC QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + + power-domains = <&rpmhpd RPMHPD_CX>, + <&rpmhpd RPMHPD_MSS>; + power-domain-names = "cx", + "mss"; + + memory-region = <&mpss_mem>, <&q6_mpss_dtb_mem>, + <&mpss_dsm_mem>, <&mpss_dsm_mem_2>; + + qcom,qmp = <&aoss_qmp>; + + qcom,smem-states = <&smp2p_modem_out 0>; + qcom,smem-state-names = "stop"; + + status = "disabled"; + + glink-edge { + interrupts-extended = <&ipcc IPCC_CLIENT_MPSS + IPCC_MPROC_SIGNAL_GLINK_QMP + IRQ_TYPE_EDGE_RISING>; + + mboxes = <&ipcc IPCC_CLIENT_MPSS + IPCC_MPROC_SIGNAL_GLINK_QMP>; + + qcom,remote-pid = <1>; + + label = "mpss"; + }; + }; + + lpass_lpiaon_noc: interconnect@7400000 { + compatible = "qcom,sm8650-lpass-lpiaon-noc"; + reg = <0 0x07400000 0 0x19080>; + + #interconnect-cells = <2>; + + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + lpass_lpicx_noc: interconnect@7430000 { + compatible = "qcom,sm8650-lpass-lpicx-noc"; + reg = <0 0x07430000 0 0x3a200>; + + #interconnect-cells = <2>; + + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + lpass_ag_noc: interconnect@7e40000 { + compatible = "qcom,sm8650-lpass-ag-noc"; + reg = <0 0x07e40000 0 0xe080>; + + #interconnect-cells = <2>; + + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + sdhc_2: mmc@8804000 { + compatible = "qcom,sm8650-sdhci", "qcom,sdhci-msm-v5"; + reg = <0 0x08804000 0 0x1000>; + + interrupts = , + ; + interrupt-names = "hc_irq", + "pwr_irq"; + + clocks = <&gcc GCC_SDCC2_AHB_CLK>, + <&gcc GCC_SDCC2_APPS_CLK>, + <&rpmhcc RPMH_CXO_CLK>; + clock-names = "iface", + "core", + "xo"; + + interconnects = <&aggre2_noc MASTER_SDCC_2 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_SDCC_2 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "sdhc-ddr", + "cpu-sdhc"; + + power-domains = <&rpmhpd RPMHPD_CX>; + operating-points-v2 = <&sdhc2_opp_table>; + + iommus = <&apps_smmu 0x540 0>; + + bus-width = <4>; + + /* Forbid SDR104/SDR50 - broken hw! */ + sdhci-caps-mask = <0x3 0>; + + qcom,dll-config = <0x0007642c>; + qcom,ddr-config = <0x80040868>; + + dma-coherent; + + status = "disabled"; + + sdhc2_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-19200000 { + opp-hz = /bits/ 64 <19200000>; + required-opps = <&rpmhpd_opp_min_svs>; + }; + + opp-50000000 { + opp-hz = /bits/ 64 <50000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-100000000 { + opp-hz = /bits/ 64 <100000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-202000000 { + opp-hz = /bits/ 64 <202000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + }; + }; + + mdss: display-subsystem@ae00000 { + compatible = "qcom,sm8650-mdss"; + reg = <0 0x0ae00000 0 0x1000>; + reg-names = "mdss"; + + interrupts = ; + + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&gcc GCC_DISP_HF_AXI_CLK>, + <&dispcc DISP_CC_MDSS_MDP_CLK>; + + resets = <&dispcc DISP_CC_MDSS_CORE_BCR>; + + interconnects = <&mmss_noc MASTER_MDP QCOM_ICC_TAG_ALWAYS + &gem_noc SLAVE_LLCC QCOM_ICC_TAG_ALWAYS>, + <&mc_virt MASTER_LLCC QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "mdp0-mem", + "mdp1-mem"; + + power-domains = <&dispcc MDSS_GDSC>; + + iommus = <&apps_smmu 0x1c00 0x2>; + + interrupt-controller; + #interrupt-cells = <1>; + + #address-cells = <2>; + #size-cells = <2>; + ranges; + + status = "disabled"; + + mdss_mdp: display-controller@ae01000 { + compatible = "qcom,sm8650-dpu"; + reg = <0 0x0ae01000 0 0x8f000>, + <0 0x0aeb0000 0 0x2008>; + reg-names = "mdp", + "vbif"; + + interrupts-extended = <&mdss 0>; + + clocks = <&gcc GCC_DISP_HF_AXI_CLK>, + <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&dispcc DISP_CC_MDSS_MDP_LUT_CLK>, + <&dispcc DISP_CC_MDSS_MDP_CLK>, + <&dispcc DISP_CC_MDSS_VSYNC_CLK>; + clock-names = "nrt_bus", + "iface", + "lut", + "core", + "vsync"; + + assigned-clocks = <&dispcc DISP_CC_MDSS_VSYNC_CLK>; + assigned-clock-rates = <19200000>; + + operating-points-v2 = <&mdp_opp_table>; + + power-domains = <&rpmhpd RPMHPD_MMCX>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + dpu_intf1_out: endpoint { + remote-endpoint = <&mdss_dsi0_in>; + }; + }; + + port@1 { + reg = <1>; + + dpu_intf2_out: endpoint { + remote-endpoint = <&mdss_dsi1_in>; + }; + }; + }; + + mdp_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-200000000 { + opp-hz = /bits/ 64 <200000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-325000000 { + opp-hz = /bits/ 64 <325000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-375000000 { + opp-hz = /bits/ 64 <375000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + + opp-514000000 { + opp-hz = /bits/ 64 <514000000>; + required-opps = <&rpmhpd_opp_nom>; + }; + }; + }; + + mdss_dsi0: dsi@ae94000 { + compatible = "qcom,sm8650-dsi-ctrl", "qcom,mdss-dsi-ctrl"; + reg = <0 0x0ae94000 0 0x400>; + reg-names = "dsi_ctrl"; + + interrupts-extended = <&mdss 4>; + + clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>, + <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>, + <&dispcc DISP_CC_MDSS_PCLK0_CLK>, + <&dispcc DISP_CC_MDSS_ESC0_CLK>, + <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&gcc GCC_DISP_HF_AXI_CLK>; + clock-names = "byte", + "byte_intf", + "pixel", + "core", + "iface", + "bus"; + + assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>, + <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>; + assigned-clock-parents = <&mdss_dsi0_phy 0>, + <&mdss_dsi0_phy 1>; + + operating-points-v2 = <&mdss_dsi_opp_table>; + + power-domains = <&rpmhpd RPMHPD_MMCX>; + + phys = <&mdss_dsi0_phy>; + phy-names = "dsi"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + mdss_dsi0_in: endpoint { + remote-endpoint = <&dpu_intf1_out>; + }; + }; + + port@1 { + reg = <1>; + + mdss_dsi0_out: endpoint { + }; + }; + }; + + mdss_dsi_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-187500000 { + opp-hz = /bits/ 64 <187500000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-300000000 { + opp-hz = /bits/ 64 <300000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-358000000 { + opp-hz = /bits/ 64 <358000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + }; + }; + + mdss_dsi0_phy: phy@ae95000 { + compatible = "qcom,sm8650-dsi-phy-4nm"; + reg = <0 0x0ae95000 0 0x200>, + <0 0x0ae95200 0 0x280>, + <0 0x0ae95500 0 0x400>; + reg-names = "dsi_phy", + "dsi_phy_lane", + "dsi_pll"; + + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&rpmhcc RPMH_CXO_CLK>; + clock-names = "iface", + "ref"; + + #clock-cells = <1>; + #phy-cells = <0>; + + status = "disabled"; + }; + + mdss_dsi1: dsi@ae96000 { + compatible = "qcom,sm8650-dsi-ctrl", "qcom,mdss-dsi-ctrl"; + reg = <0 0x0ae96000 0 0x400>; + reg-names = "dsi_ctrl"; + + interrupts-extended = <&mdss 5>; + + clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK>, + <&dispcc DISP_CC_MDSS_BYTE1_INTF_CLK>, + <&dispcc DISP_CC_MDSS_PCLK1_CLK>, + <&dispcc DISP_CC_MDSS_ESC1_CLK>, + <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&gcc GCC_DISP_HF_AXI_CLK>; + clock-names = "byte", + "byte_intf", + "pixel", + "core", + "iface", + "bus"; + + assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK_SRC>, + <&dispcc DISP_CC_MDSS_PCLK1_CLK_SRC>; + assigned-clock-parents = <&mdss_dsi1_phy 0>, + <&mdss_dsi1_phy 1>; + + operating-points-v2 = <&mdss_dsi_opp_table>; + + power-domains = <&rpmhpd RPMHPD_MMCX>; + + phys = <&mdss_dsi1_phy>; + phy-names = "dsi"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + mdss_dsi1_in: endpoint { + remote-endpoint = <&dpu_intf2_out>; + }; + }; + + port@1 { + reg = <1>; + + mdss_dsi1_out: endpoint { + }; + }; + }; + }; + + mdss_dsi1_phy: phy@ae97000 { + compatible = "qcom,sm8650-dsi-phy-4nm"; + reg = <0 0x0ae97000 0 0x200>, + <0 0x0ae97200 0 0x280>, + <0 0x0ae97500 0 0x400>; + reg-names = "dsi_phy", + "dsi_phy_lane", + "dsi_pll"; + + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&rpmhcc RPMH_CXO_CLK>; + clock-names = "iface", + "ref"; + + #clock-cells = <1>; + #phy-cells = <0>; + + status = "disabled"; + }; + }; + + dispcc: clock-controller@af00000 { + compatible = "qcom,sm8650-dispcc"; + reg = <0 0x0af00000 0 0x20000>; + + clocks = <&bi_tcxo_div2>, + <&bi_tcxo_ao_div2>, + <&gcc GCC_DISP_AHB_CLK>, + <&sleep_clk>, + <&mdss_dsi0_phy 0>, + <&mdss_dsi0_phy 1>, + <&mdss_dsi1_phy 0>, + <&mdss_dsi1_phy 1>, + <0>, /* dp0 */ + <0>, + <0>, /* dp1 */ + <0>, + <0>, /* dp2 */ + <0>, + <0>, /* dp3 */ + <0>; + + power-domains = <&rpmhpd RPMHPD_MMCX>; + required-opps = <&rpmhpd_opp_low_svs>; + + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + + status = "disabled"; + }; + + usb_1_hsphy: phy@88e3000 { + compatible = "qcom,sm8650-snps-eusb2-phy", + "qcom,sm8550-snps-eusb2-phy"; + reg = <0 0x088e3000 0 0x154>; + + clocks = <&tcsr TCSR_USB2_CLKREF_EN>; + clock-names = "ref"; + + resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>; + + #phy-cells = <0>; + + status = "disabled"; + }; + + usb_dp_qmpphy: phy@88e8000 { + compatible = "qcom,sm8650-qmp-usb3-dp-phy"; + reg = <0 0x088e8000 0 0x3000>; + + clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>, + <&rpmhcc RPMH_CXO_CLK>, + <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>, + <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>; + clock-names = "aux", + "ref", + "com_aux", + "usb3_pipe"; + + resets = <&gcc GCC_USB3_PHY_PRIM_BCR>, + <&gcc GCC_USB3_DP_PHY_PRIM_BCR>; + reset-names = "phy", + "common"; + + power-domains = <&gcc USB3_PHY_GDSC>; + + #clock-cells = <1>; + #phy-cells = <1>; + + status = "disabled"; + }; + + usb_1: usb@a6f8800 { + compatible = "qcom,sm8650-dwc3", "qcom,dwc3"; + reg = <0 0x0a6f8800 0 0x400>; + + interrupts-extended = <&intc GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>, + <&pdc 17 IRQ_TYPE_LEVEL_HIGH>, + <&pdc 15 IRQ_TYPE_EDGE_RISING>, + <&pdc 14 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "hs_phy_irq", + "ss_phy_irq", + "dm_hs_phy_irq", + "dp_hs_phy_irq"; + + clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>, + <&gcc GCC_USB30_PRIM_MASTER_CLK>, + <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>, + <&gcc GCC_USB30_PRIM_SLEEP_CLK>, + <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>, + <&tcsr TCSR_USB3_CLKREF_EN>; + clock-names = "cfg_noc", + "core", + "iface", + "sleep", + "mock_utmi", + "xo"; + + assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>, + <&gcc GCC_USB30_PRIM_MASTER_CLK>; + assigned-clock-rates = <19200000>, <200000000>; + + resets = <&gcc GCC_USB30_PRIM_BCR>; + + power-domains = <&gcc USB30_PRIM_GDSC>; + required-opps = <&rpmhpd_opp_nom>; + + #address-cells = <2>; + #size-cells = <2>; + ranges; + + status = "disabled"; + + usb_1_dwc3: usb@a600000 { + compatible = "snps,dwc3"; + reg = <0 0x0a600000 0 0xcd00>; + + interrupts = ; + + iommus = <&apps_smmu 0x40 0>; + + phys = <&usb_1_hsphy>, + <&usb_dp_qmpphy QMP_USB43DP_USB3_PHY>; + phy-names = "usb2-phy", + "usb3-phy"; + + snps,hird-threshold = /bits/ 8 <0x0>; + snps,usb2-gadget-lpm-disable; + snps,dis_u2_susphy_quirk; + snps,dis_enblslpm_quirk; + snps,dis-u1-entry-quirk; + snps,dis-u2-entry-quirk; + snps,is-utmi-l1-suspend; + snps,usb3_lpm_capable; + snps,usb2-lpm-disable; + snps,has-lpm-erratum; + tx-fifo-resize; + + dma-coherent; + + ports { + #address-cells = <1>; #size-cells = <0>; port@0 { @@ -969,115 +3155,602 @@ pdc: interrupt-controller@b220000 { <125 63 1>, <126 716 12>, <138 251 5>, <143 244 4>; - #interrupt-cells = <2>; - interrupt-controller; - }; + #interrupt-cells = <2>; + interrupt-controller; + }; + + tsens0: thermal-sensor@c228000 { + compatible = "qcom,sm8650-tsens", "qcom,tsens-v2"; + reg = <0 0x0c228000 0 0x1000>, /* TM */ + <0 0x0c222000 0 0x1000>; /* SROT */ + + interrupts = , + ; + interrupt-names = "uplow", + "critical"; + + #qcom,sensors = <15>; + + #thermal-sensor-cells = <1>; + }; + + tsens1: thermal-sensor@c229000 { + compatible = "qcom,sm8650-tsens", "qcom,tsens-v2"; + reg = <0 0x0c229000 0 0x1000>, /* TM */ + <0 0x0c223000 0 0x1000>; /* SROT */ + + interrupts = , + ; + interrupt-names = "uplow", + "critical"; + + #qcom,sensors = <16>; + + #thermal-sensor-cells = <1>; + }; + + tsens2: thermal-sensor@c22a000 { + compatible = "qcom,sm8650-tsens", "qcom,tsens-v2"; + reg = <0 0x0c22a000 0 0x1000>, /* TM */ + <0 0x0c224000 0 0x1000>; /* SROT */ + + interrupts = , + ; + interrupt-names = "uplow", + "critical"; + + #qcom,sensors = <13>; + + #thermal-sensor-cells = <1>; + }; + + aoss_qmp: power-management@c300000 { + compatible = "qcom,sm8650-aoss-qmp", "qcom,aoss-qmp"; + reg = <0 0x0c300000 0 0x400>; + + interrupt-parent = <&ipcc>; + interrupts-extended = <&ipcc IPCC_CLIENT_AOP IPCC_MPROC_SIGNAL_GLINK_QMP + IRQ_TYPE_EDGE_RISING>; + + mboxes = <&ipcc IPCC_CLIENT_AOP IPCC_MPROC_SIGNAL_GLINK_QMP>; + + #clock-cells = <0>; + }; + + sram@c3f0000 { + compatible = "qcom,rpmh-stats"; + reg = <0 0x0c3f0000 0 0x400>; + }; + + spmi_bus: spmi@c400000 { + compatible = "qcom,spmi-pmic-arb"; + reg = <0 0x0c400000 0 0x3000>, + <0 0x0c500000 0 0x4000000>, + <0 0x0c440000 0 0x80000>, + <0 0x0c4c0000 0 0x20000>, + <0 0x0c42d000 0 0x4000>; + reg-names = "core", + "chnls", + "obsrvr", + "intr", + "cnfg"; + + interrupts-extended = <&pdc 1 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "periph_irq"; + + qcom,ee = <0>; + qcom,channel = <0>; + qcom,bus-id = <0>; + + interrupt-controller; + #interrupt-cells = <4>; + + #address-cells = <2>; + #size-cells = <0>; + }; + + tlmm: pinctrl@f100000 { + compatible = "qcom,sm8650-tlmm"; + reg = <0 0x0f100000 0 0x300000>; + + interrupts = ; + + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + + gpio-ranges = <&tlmm 0 0 211>; + + wakeup-parent = <&pdc>; + + hub_i2c0_data_clk: hub-i2c0-data-clk-state { + /* SDA, SCL */ + pins = "gpio64", "gpio65"; + function = "i2chub0_se0"; + drive-strength = <2>; + bias-pull-up; + }; + + hub_i2c1_data_clk: hub-i2c1-data-clk-state { + /* SDA, SCL */ + pins = "gpio66", "gpio67"; + function = "i2chub0_se1"; + drive-strength = <2>; + bias-pull-up; + }; + + hub_i2c2_data_clk: hub-i2c2-data-clk-state { + /* SDA, SCL */ + pins = "gpio68", "gpio69"; + function = "i2chub0_se2"; + drive-strength = <2>; + bias-pull-up; + }; + + hub_i2c3_data_clk: hub-i2c3-data-clk-state { + /* SDA, SCL */ + pins = "gpio70", "gpio71"; + function = "i2chub0_se3"; + drive-strength = <2>; + bias-pull-up; + }; + + hub_i2c4_data_clk: hub-i2c4-data-clk-state { + /* SDA, SCL */ + pins = "gpio72", "gpio73"; + function = "i2chub0_se4"; + drive-strength = <2>; + bias-pull-up; + }; + + hub_i2c5_data_clk: hub-i2c5-data-clk-state { + /* SDA, SCL */ + pins = "gpio74", "gpio75"; + function = "i2chub0_se5"; + drive-strength = <2>; + bias-pull-up; + }; + + hub_i2c6_data_clk: hub-i2c6-data-clk-state { + /* SDA, SCL */ + pins = "gpio76", "gpio77"; + function = "i2chub0_se6"; + drive-strength = <2>; + bias-pull-up; + }; + + hub_i2c7_data_clk: hub-i2c7-data-clk-state { + /* SDA, SCL */ + pins = "gpio78", "gpio79"; + function = "i2chub0_se7"; + drive-strength = <2>; + bias-pull-up; + }; + + hub_i2c8_data_clk: hub-i2c8-data-clk-state { + /* SDA, SCL */ + pins = "gpio206", "gpio207"; + function = "i2chub0_se8"; + drive-strength = <2>; + bias-pull-up; + }; + + hub_i2c9_data_clk: hub-i2c9-data-clk-state { + /* SDA, SCL */ + pins = "gpio80", "gpio81"; + function = "i2chub0_se9"; + drive-strength = <2>; + bias-pull-up; + }; + + pcie0_default_state: pcie0-default-state { + perst-pins { + pins = "gpio94"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + clkreq-pins { + pins = "gpio95"; + function = "pcie0_clk_req_n"; + drive-strength = <2>; + bias-pull-up; + }; + + wake-pins { + pins = "gpio96"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + }; + + pcie1_default_state: pcie1-default-state { + perst-pins { + pins = "gpio97"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + clkreq-pins { + pins = "gpio98"; + function = "pcie1_clk_req_n"; + drive-strength = <2>; + bias-pull-up; + }; + + wake-pins { + pins = "gpio99"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + }; + + qup_i2c0_data_clk: qup-i2c0-data-clk-state { + /* SDA, SCL */ + pins = "gpio32", "gpio33"; + function = "qup1_se0"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_i2c1_data_clk: qup-i2c1-data-clk-state { + /* SDA, SCL */ + pins = "gpio36", "gpio37"; + function = "qup1_se1"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_i2c2_data_clk: qup-i2c2-data-clk-state { + /* SDA, SCL */ + pins = "gpio40", "gpio41"; + function = "qup1_se2"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_i2c3_data_clk: qup-i2c3-data-clk-state { + /* SDA, SCL */ + pins = "gpio44", "gpio45"; + function = "qup1_se3"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_i2c4_data_clk: qup-i2c4-data-clk-state { + /* SDA, SCL */ + pins = "gpio48", "gpio49"; + function = "qup1_se4"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_i2c5_data_clk: qup-i2c5-data-clk-state { + /* SDA, SCL */ + pins = "gpio52", "gpio53"; + function = "qup1_se5"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_i2c6_data_clk: qup-i2c6-data-clk-state { + /* SDA, SCL */ + pins = "gpio56", "gpio57"; + function = "qup1_se6"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_i2c7_data_clk: qup-i2c7-data-clk-state { + /* SDA, SCL */ + pins = "gpio60", "gpio61"; + function = "qup1_se7"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_i2c8_data_clk: qup-i2c8-data-clk-state { + /* SDA, SCL */ + pins = "gpio0", "gpio1"; + function = "qup2_se0"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_i2c9_data_clk: qup-i2c9-data-clk-state { + /* SDA, SCL */ + pins = "gpio4", "gpio5"; + function = "qup2_se1"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_i2c10_data_clk: qup-i2c10-data-clk-state { + /* SDA, SCL */ + pins = "gpio8", "gpio9"; + function = "qup2_se2"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_i2c11_data_clk: qup-i2c11-data-clk-state { + /* SDA, SCL */ + pins = "gpio12", "gpio13"; + function = "qup2_se3"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_i2c12_data_clk: qup-i2c12-data-clk-state { + /* SDA, SCL */ + pins = "gpio16", "gpio17"; + function = "qup2_se4"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_i2c13_data_clk: qup-i2c13-data-clk-state { + /* SDA, SCL */ + pins = "gpio20", "gpio21"; + function = "qup2_se5"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_i2c14_data_clk: qup-i2c14-data-clk-state { + /* SDA, SCL */ + pins = "gpio24", "gpio25"; + function = "qup2_se6"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_spi0_cs: qup-spi0-cs-state { + pins = "gpio35"; + function = "qup1_se0"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi0_data_clk: qup-spi0-data-clk-state { + /* MISO, MOSI, CLK */ + pins = "gpio32", "gpio33", "gpio34"; + function = "qup1_se0"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi1_cs: qup-spi1-cs-state { + pins = "gpio39"; + function = "qup1_se1"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi1_data_clk: qup-spi1-data-clk-state { + /* MISO, MOSI, CLK */ + pins = "gpio36", "gpio37", "gpio38"; + function = "qup1_se1"; + drive-strength = <6>; + bias-disable; + }; - tsens0: thermal-sensor@c228000 { - compatible = "qcom,sm8650-tsens", "qcom,tsens-v2"; - reg = <0 0x0c228000 0 0x1000>, /* TM */ - <0 0x0c222000 0 0x1000>; /* SROT */ + qup_spi2_cs: qup-spi2-cs-state { + pins = "gpio43"; + function = "qup1_se2"; + drive-strength = <6>; + bias-disable; + }; - interrupts = , - ; - interrupt-names = "uplow", - "critical"; + qup_spi2_data_clk: qup-spi2-data-clk-state { + /* MISO, MOSI, CLK */ + pins = "gpio40", "gpio41", "gpio42"; + function = "qup1_se2"; + drive-strength = <6>; + bias-disable; + }; - #qcom,sensors = <15>; + qup_spi3_cs: qup-spi3-cs-state { + pins = "gpio47"; + function = "qup1_se3"; + drive-strength = <6>; + bias-disable; + }; - #thermal-sensor-cells = <1>; - }; + qup_spi3_data_clk: qup-spi3-data-clk-state { + /* MISO, MOSI, CLK */ + pins = "gpio44", "gpio45", "gpio46"; + function = "qup1_se3"; + drive-strength = <6>; + bias-disable; + }; - tsens1: thermal-sensor@c229000 { - compatible = "qcom,sm8650-tsens", "qcom,tsens-v2"; - reg = <0 0x0c229000 0 0x1000>, /* TM */ - <0 0x0c223000 0 0x1000>; /* SROT */ + qup_spi4_cs: qup-spi4-cs-state { + pins = "gpio51"; + function = "qup1_se4"; + drive-strength = <6>; + bias-disable; + }; - interrupts = , - ; - interrupt-names = "uplow", - "critical"; + qup_spi4_data_clk: qup-spi4-data-clk-state { + /* MISO, MOSI, CLK */ + pins = "gpio48", "gpio49", "gpio50"; + function = "qup1_se4"; + drive-strength = <6>; + bias-disable; + }; - #qcom,sensors = <16>; + qup_spi5_cs: qup-spi5-cs-state { + pins = "gpio55"; + function = "qup1_se5"; + drive-strength = <6>; + bias-disable; + }; - #thermal-sensor-cells = <1>; - }; + qup_spi5_data_clk: qup-spi5-data-clk-state { + /* MISO, MOSI, CLK */ + pins = "gpio52", "gpio53", "gpio54"; + function = "qup1_se5"; + drive-strength = <6>; + bias-disable; + }; - tsens2: thermal-sensor@c22a000 { - compatible = "qcom,sm8650-tsens", "qcom,tsens-v2"; - reg = <0 0x0c22a000 0 0x1000>, /* TM */ - <0 0x0c224000 0 0x1000>; /* SROT */ + qup_spi6_cs: qup-spi6-cs-state { + pins = "gpio59"; + function = "qup1_se6"; + drive-strength = <6>; + bias-disable; + }; - interrupts = , - ; - interrupt-names = "uplow", - "critical"; + qup_spi6_data_clk: qup-spi6-data-clk-state { + /* MISO, MOSI, CLK */ + pins = "gpio56", "gpio57", "gpio58"; + function = "qup1_se6"; + drive-strength = <6>; + bias-disable; + }; - #qcom,sensors = <13>; + qup_spi7_cs: qup-spi7-cs-state { + pins = "gpio63"; + function = "qup1_se7"; + drive-strength = <6>; + bias-disable; + }; - #thermal-sensor-cells = <1>; - }; + qup_spi7_data_clk: qup-spi7-data-clk-state { + /* MISO, MOSI, CLK */ + pins = "gpio60", "gpio61", "gpio62"; + function = "qup1_se7"; + drive-strength = <6>; + bias-disable; + }; - aoss_qmp: power-management@c300000 { - compatible = "qcom,sm8650-aoss-qmp", "qcom,aoss-qmp"; - reg = <0 0x0c300000 0 0x400>; + qup_spi8_cs: qup-spi8-cs-state { + pins = "gpio3"; + function = "qup2_se0"; + drive-strength = <6>; + bias-disable; + }; - interrupt-parent = <&ipcc>; - interrupts-extended = <&ipcc IPCC_CLIENT_AOP IPCC_MPROC_SIGNAL_GLINK_QMP - IRQ_TYPE_EDGE_RISING>; + qup_spi8_data_clk: qup-spi8-data-clk-state { + /* MISO, MOSI, CLK */ + pins = "gpio0", "gpio1", "gpio2"; + function = "qup2_se0"; + drive-strength = <6>; + bias-disable; + }; - mboxes = <&ipcc IPCC_CLIENT_AOP IPCC_MPROC_SIGNAL_GLINK_QMP>; + qup_spi9_cs: qup-spi9-cs-state { + pins = "gpio7"; + function = "qup2_se1"; + drive-strength = <6>; + bias-disable; + }; - #clock-cells = <0>; - }; + qup_spi9_data_clk: qup-spi9-data-clk-state { + /* MISO, MOSI, CLK */ + pins = "gpio4", "gpio5", "gpio6"; + function = "qup2_se1"; + drive-strength = <6>; + bias-disable; + }; - sram@c3f0000 { - compatible = "qcom,rpmh-stats"; - reg = <0 0x0c3f0000 0 0x400>; - }; + qup_spi10_cs: qup-spi10-cs-state { + pins = "gpio11"; + function = "qup2_se2"; + drive-strength = <6>; + bias-disable; + }; - spmi_bus: spmi@c400000 { - compatible = "qcom,spmi-pmic-arb"; - reg = <0 0x0c400000 0 0x3000>, - <0 0x0c500000 0 0x4000000>, - <0 0x0c440000 0 0x80000>, - <0 0x0c4c0000 0 0x20000>, - <0 0x0c42d000 0 0x4000>; - reg-names = "core", - "chnls", - "obsrvr", - "intr", - "cnfg"; + qup_spi10_data_clk: qup-spi10-data-clk-state { + /* MISO, MOSI, CLK */ + pins = "gpio8", "gpio9", "gpio10"; + function = "qup2_se2"; + drive-strength = <6>; + bias-disable; + }; - interrupts-extended = <&pdc 1 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "periph_irq"; + qup_spi11_cs: qup-spi11-cs-state { + pins = "gpio15"; + function = "qup2_se3"; + drive-strength = <6>; + bias-disable; + }; - qcom,ee = <0>; - qcom,channel = <0>; - qcom,bus-id = <0>; + qup_spi11_data_clk: qup-spi11-data-clk-state { + /* MISO, MOSI, CLK */ + pins = "gpio12", "gpio13", "gpio14"; + function = "qup2_se3"; + drive-strength = <6>; + bias-disable; + }; - interrupt-controller; - #interrupt-cells = <4>; + qup_spi12_cs: qup-spi12-cs-state { + pins = "gpio19"; + function = "qup2_se4"; + drive-strength = <6>; + bias-disable; + }; - #address-cells = <2>; - #size-cells = <0>; - }; + qup_spi12_data_clk: qup-spi12-data-clk-state { + /* MISO, MOSI, CLK */ + pins = "gpio16", "gpio17", "gpio18"; + function = "qup2_se4"; + drive-strength = <6>; + bias-disable; + }; - tlmm: pinctrl@f100000 { - compatible = "qcom,sm8650-tlmm"; - reg = <0 0x0f100000 0 0x300000>; + qup_spi13_cs: qup-spi13-cs-state { + pins = "gpio23"; + function = "qup2_se5"; + drive-strength = <6>; + bias-disable; + }; - interrupts = ; + qup_spi13_data_clk: qup-spi13-data-clk-state { + /* MISO, MOSI, CLK */ + pins = "gpio20", "gpio21", "gpio22"; + function = "qup2_se5"; + drive-strength = <6>; + bias-disable; + }; - gpio-controller; - #gpio-cells = <2>; + qup_spi14_cs: qup-spi14-cs-state { + pins = "gpio27"; + function = "qup2_se6"; + drive-strength = <6>; + bias-disable; + }; - interrupt-controller; - #interrupt-cells = <2>; + qup_spi14_data_clk: qup-spi14-data-clk-state { + /* MISO, MOSI, CLK */ + pins = "gpio24", "gpio25", "gpio26"; + function = "qup2_se6"; + drive-strength = <6>; + bias-disable; + }; - gpio-ranges = <&tlmm 0 0 211>; + qup_uart14_default: qup-uart14-default-state { + /* TX, RX */ + pins = "gpio26", "gpio27"; + function = "qup2_se6"; + drive-strength = <2>; + bias-pull-up; + }; - wakeup-parent = <&pdc>; + qup_uart14_cts_rts: qup-uart14-cts-rts-state { + /* CTS, RTS */ + pins = "gpio24", "gpio25"; + function = "qup2_se6"; + drive-strength = <2>; + bias-pull-down; + }; qup_uart15_default: qup-uart15-default-state { /* TX, RX */ @@ -1086,6 +3759,46 @@ qup_uart15_default: qup-uart15-default-state { drive-strength = <2>; bias-disable; }; + + sdc2_sleep: sdc2-sleep-state { + clk-pins { + pins = "sdc2_clk"; + drive-strength = <2>; + bias-disable; + }; + + cmd-pins { + pins = "sdc2_cmd"; + drive-strength = <2>; + bias-pull-up; + }; + + data-pins { + pins = "sdc2_data"; + drive-strength = <2>; + bias-pull-up; + }; + }; + + sdc2_default: sdc2-default-state { + clk-pins { + pins = "sdc2_clk"; + drive-strength = <16>; + bias-disable; + }; + + cmd-pins { + pins = "sdc2_cmd"; + drive-strength = <10>; + bias-pull-up; + }; + + data-pins { + pins = "sdc2_data"; + drive-strength = <10>; + bias-pull-up; + }; + }; }; apps_smmu: iommu@15000000 { @@ -1437,6 +4150,107 @@ cpufreq_hw: cpufreq@17d91000 { #clock-cells = <1>; }; + pmu@24091000 { + compatible = "qcom,sm8650-llcc-bwmon", "qcom,sc7280-llcc-bwmon"; + reg = <0 0x24091000 0 0x1000>; + + interrupts = ; + + interconnects = <&mc_virt MASTER_LLCC QCOM_ICC_TAG_ACTIVE_ONLY + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ACTIVE_ONLY>; + + operating-points-v2 = <&llcc_bwmon_opp_table>; + + llcc_bwmon_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-0 { + opp-peak-kBps = <2086000>; + }; + + opp-1 { + opp-peak-kBps = <2929000>; + }; + + opp-2 { + opp-peak-kBps = <5931000>; + }; + + opp-3 { + opp-peak-kBps = <6515000>; + }; + + opp-4 { + opp-peak-kBps = <7980000>; + }; + + opp-5 { + opp-peak-kBps = <10437000>; + }; + + opp-6 { + opp-peak-kBps = <12157000>; + }; + + opp-7 { + opp-peak-kBps = <14060000>; + }; + + opp-8 { + opp-peak-kBps = <16113000>; + }; + }; + }; + + pmu@240b7400 { + compatible = "qcom,sm8650-cpu-bwmon", "qcom,sdm845-bwmon"; + reg = <0 0x240b7400 0 0x600>; + + interrupts = ; + + interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &gem_noc SLAVE_LLCC QCOM_ICC_TAG_ACTIVE_ONLY>; + + operating-points-v2 = <&cpu_bwmon_opp_table>; + + cpu_bwmon_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-0 { + opp-peak-kBps = <4577000>; + }; + + opp-1 { + opp-peak-kBps = <7110000>; + }; + + opp-2 { + opp-peak-kBps = <9155000>; + }; + + opp-3 { + opp-peak-kBps = <12298000>; + }; + + opp-4 { + opp-peak-kBps = <14236000>; + }; + + opp-5 { + opp-peak-kBps = <16265000>; + }; + }; + }; + + gem_noc: interconnect@24100000 { + compatible = "qcom,sm8650-gem-noc"; + reg = <0 0x24100000 0 0xc5080>; + + qcom,bcm-voters = <&apps_bcm_voter>; + + #interconnect-cells = <2>; + }; + system-cache-controller@25000000 { compatible = "qcom,sm8650-llcc"; reg = <0 0x25000000 0 0x200000>, @@ -1452,6 +4266,137 @@ system-cache-controller@25000000 { interrupts = ; }; + + remoteproc_adsp: remoteproc@30000000 { + compatible = "qcom,sm8650-adsp-pas"; + reg = <0 0x30000000 0 0x100>; + + interrupts-extended = <&pdc 6 IRQ_TYPE_EDGE_RISING>, + <&smp2p_adsp_in 0 IRQ_TYPE_EDGE_RISING>, + <&smp2p_adsp_in 1 IRQ_TYPE_EDGE_RISING>, + <&smp2p_adsp_in 2 IRQ_TYPE_EDGE_RISING>, + <&smp2p_adsp_in 3 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", + "fatal", + "ready", + "handover", + "stop-ack"; + + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-names = "xo"; + + interconnects = <&lpass_lpicx_noc MASTER_LPASS_PROC QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + + power-domains = <&rpmhpd RPMHPD_LCX>, + <&rpmhpd RPMHPD_LMX>; + power-domain-names = "lcx", + "lmx"; + + memory-region = <&adspslpi_mem>, <&q6_adsp_dtb_mem>; + + qcom,qmp = <&aoss_qmp>; + + qcom,smem-states = <&smp2p_adsp_out 0>; + qcom,smem-state-names = "stop"; + + status = "disabled"; + + remoteproc_adsp_glink: glink-edge { + interrupts-extended = <&ipcc IPCC_CLIENT_LPASS + IPCC_MPROC_SIGNAL_GLINK_QMP + IRQ_TYPE_EDGE_RISING>; + + mboxes = <&ipcc IPCC_CLIENT_LPASS + IPCC_MPROC_SIGNAL_GLINK_QMP>; + + qcom,remote-pid = <2>; + + label = "lpass"; + + fastrpc { + compatible = "qcom,fastrpc"; + + qcom,glink-channels = "fastrpcglink-apps-dsp"; + + label = "adsp"; + + #address-cells = <1>; + #size-cells = <0>; + }; + }; + }; + + nsp_noc: interconnect@320c0000 { + compatible = "qcom,sm8650-nsp-noc"; + reg = <0 0x320c0000 0 0xf080>; + + qcom,bcm-voters = <&apps_bcm_voter>; + + #interconnect-cells = <2>; + }; + + remoteproc_cdsp: remoteproc@32300000 { + compatible = "qcom,sm8650-cdsp-pas"; + reg = <0 0x32300000 0 0x1400000>; + + interrupts-extended = <&intc GIC_SPI 578 IRQ_TYPE_EDGE_RISING>, + <&smp2p_cdsp_in 0 IRQ_TYPE_EDGE_RISING>, + <&smp2p_cdsp_in 1 IRQ_TYPE_EDGE_RISING>, + <&smp2p_cdsp_in 2 IRQ_TYPE_EDGE_RISING>, + <&smp2p_cdsp_in 3 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", + "fatal", + "ready", + "handover", + "stop-ack"; + + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-names = "xo"; + + interconnects = <&nsp_noc MASTER_CDSP_PROC QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + + power-domains = <&rpmhpd RPMHPD_CX>, + <&rpmhpd RPMHPD_MXC>, + <&rpmhpd RPMHPD_NSP>; + power-domain-names = "cx", + "mxc", + "nsp"; + + memory-region = <&cdsp_mem>, <&q6_cdsp_dtb_mem>, <&global_sync_mem>; + + qcom,qmp = <&aoss_qmp>; + + qcom,smem-states = <&smp2p_cdsp_out 0>; + qcom,smem-state-names = "stop"; + + status = "disabled"; + + glink-edge { + interrupts-extended = <&ipcc IPCC_CLIENT_CDSP + IPCC_MPROC_SIGNAL_GLINK_QMP + IRQ_TYPE_EDGE_RISING>; + + mboxes = <&ipcc IPCC_CLIENT_CDSP + IPCC_MPROC_SIGNAL_GLINK_QMP>; + + qcom,remote-pid = <5>; + + label = "cdsp"; + + fastrpc { + compatible = "qcom,fastrpc"; + + qcom,glink-channels = "fastrpcglink-apps-dsp"; + + label = "cdsp"; + + #address-cells = <1>; + #size-cells = <0>; + }; + }; + }; }; thermal-zones { From patchwork Tue Nov 21 11:00:06 2023 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Neil Armstrong X-Patchwork-Id: 13462829 Authentication-Results: smtp.subspace.kernel.org; dkim=pass (2048-bit key) header.d=linaro.org header.i=@linaro.org header.b="qjZ8Wc4w" Received: from mail-wr1-x435.google.com (mail-wr1-x435.google.com [IPv6:2a00:1450:4864:20::435]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id D19AF183 for ; Tue, 21 Nov 2023 03:00:16 -0800 (PST) Received: by mail-wr1-x435.google.com with SMTP id ffacd0b85a97d-32f737deedfso3475594f8f.3 for ; Tue, 21 Nov 2023 03:00:16 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=linaro.org; s=google; t=1700564415; x=1701169215; darn=vger.kernel.org; h=cc:to:in-reply-to:references:message-id:content-transfer-encoding :mime-version:subject:date:from:from:to:cc:subject:date:message-id :reply-to; bh=xwH2qT1++PESiijZP+WOU7M8Ojp5c692ghEq6yuOePc=; b=qjZ8Wc4wqJjU3DoyQUlBuXTdY3mTWW7/BbiT2DogE98b1efWCMv63Ot0cjVJWEk0bB gbo1RH9a1UJ6k0azDyl8KDS5WRdgc+wfyk8Tcnsvvj9S3TiIgwdUIfqvm1VgcRfCg2xN //eU4Ovt1WK5jqB6oCazBWKMGxEQXE0wE1IAOFY5GnBUxmDZQJB0CmBxfdHeT4zRq0ia uZ1NJbAec5KWL0ukE3Th/kuFETi7p1KQdcdb2rkgVREB71tGQHmuGluCKI/xtQo1oZ8i ws0L80R4XZVvzzgxyIND3qexIQX4eRm/f7E+lgPSO2TeR9DXtMRrbrmqVUse7t3cM+HI PzCQ== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20230601; t=1700564415; x=1701169215; h=cc:to:in-reply-to:references:message-id:content-transfer-encoding :mime-version:subject:date:from:x-gm-message-state:from:to:cc :subject:date:message-id:reply-to; bh=xwH2qT1++PESiijZP+WOU7M8Ojp5c692ghEq6yuOePc=; b=TRw9a1dtYtncI1rFUs5YJLeyloD4aCNZscFdspJKb9xAsPZ1RdYjYbUYDwU21eHLvO M7/6pvGRi5Ia+TpWjfCmhcpiTfjQyt0by5wTbzONgNOiVPy5e+W12CsHOi2hfLecU1wB kJZML6XQaC/EBYtwF6NSTZzFDsgR+0A/YoKaiKQsYuBV5uVScushdZytEjQG60oEDH6A 2+xzLFrQI39sBqsEYnHvbnBUrGCmapz23/stDnLxv8Vjg7FJEu9AJ3o8bJ3RfNi+PbQB 7bftrMrDhg1P///pJEHYY9gaV5CmrrZ1nk2u9D9rSYAXZPNF45lQznKyttJ33j8eRV/+ 01Xw== X-Gm-Message-State: AOJu0YxwMhI/zTsY5MB20ytMjzsMETrgRKKjhXqP1lMkwru+yobh7ged JqXre861mRV2Epo0HTftK3Xg3Q== X-Google-Smtp-Source: AGHT+IE95PhMZ3mQqdYHhl7BrEzFMCT3RXiPCG1qr8A3pvAGA7pECQ6N4tMzGdOapqBvoZYjCqWkrw== X-Received: by 2002:a05:6000:18a5:b0:332:ca0b:5793 with SMTP id b5-20020a05600018a500b00332ca0b5793mr4011361wri.19.1700564415282; Tue, 21 Nov 2023 03:00:15 -0800 (PST) Received: from arrakeen.starnux.net ([2a01:e0a:982:cbb0:8261:5fff:fe11:bdda]) by smtp.gmail.com with ESMTPSA id f1-20020adff581000000b00332c0e934aasm9028500wro.44.2023.11.21.03.00.14 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Tue, 21 Nov 2023 03:00:14 -0800 (PST) From: Neil Armstrong Date: Tue, 21 Nov 2023 12:00:06 +0100 Subject: [PATCH v3 7/8] arm64: dts: qcom: sm8650-mtp: add interconnect dependent device nodes Precedence: bulk X-Mailing-List: linux-arm-msm@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 Message-Id: <20231121-topic-sm8650-upstream-dt-v3-7-db9d0507ffd3@linaro.org> References: <20231121-topic-sm8650-upstream-dt-v3-0-db9d0507ffd3@linaro.org> In-Reply-To: <20231121-topic-sm8650-upstream-dt-v3-0-db9d0507ffd3@linaro.org> To: Andy Gross , Bjorn Andersson , Konrad Dybcio , Rob Herring , Krzysztof Kozlowski , Conor Dooley Cc: linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, Neil Armstrong X-Mailer: b4 0.12.3 X-Developer-Signature: v=1; a=openpgp-sha256; l=6151; i=neil.armstrong@linaro.org; h=from:subject:message-id; bh=BJqOQ8YbFD3haPuSny+8xy74H+sRrIrhD+HIGPKVNco=; b=owEBbQKS/ZANAwAKAXfc29rIyEnRAcsmYgBlXI222DZCv0WuiTPkeGSWg299DhVY5pla2KwsJAsp KsqNCiGJAjMEAAEKAB0WIQQ9U8YmyFYF/h30LIt33NvayMhJ0QUCZVyNtgAKCRB33NvayMhJ0Y8QD/ 9fOCDKRrvg/Al4Am71Ykq6D+1mj+NLMZo7+PzYWHA00y7KNQVr4CjEfNlCTyT+UqQBkOzJ5XATGrNt L4iFH4SoHC4oYY51RM8NO1p2YfJf+gIHPLVl0JqthWlYvpCMwLFfgPI3nEGlBtPXdD13fxte52K4R3 U3mO5Xn/fBBmzsgWGXB4zsWMh0Ni8B/bQZyrKAyzlGQGs90jc5CfIYyvmI8dlREHra4aawStPYMHsl dvmVs86SpAFWNDmnvZUMBWPGttVP2DB4+n2yBhPb4u39xJaoQd3utf+GAEajmN2SmNpQMMRmzkNner ljx2gK6fKKRbLZMkLNXCWTGepGIh7v811+NQpTC20ktg6cUYI6xhej7TMO0woj12sqcvFvKuMWC00Z 3MT61jsQJJhLaap9dfiGb7wVxcQDNhA5tacvyzidApQGwSmdbWoxPhBXxculqGt9IgNgNu3XjtZRV1 np3TSdj9nLjhcAFVjIWnj7Y7yaYCJYp7QbqSk6utisF/ueNxlwys7fCh1xeyRo3TPZ0jGqZu9IkMC7 Jg2Ji5WXMAVm7qMbbeWYNsuFAV7SIFYmKNLvaXg5TvWZEm0ZpOInYR2lon65WUAu5xbfQlZEng3KsO oyEWd509nug6YCZ+6SBLQUOHF69ZGZceDan+LMnvqZvRn7XPUuAZyF5XhbMw== X-Developer-Key: i=neil.armstrong@linaro.org; a=openpgp; fpr=89EC3D058446217450F22848169AB7B1A4CFF8AE Now interconnect dependent devices are added in sm8650 DTSI, now enable more devices for the Qualcomm SM8650 MTP board: - PCIe - Display - DSPs - SDCard - UFS - USB role switch with PMIC Glink Signed-off-by: Neil Armstrong --- arch/arm64/boot/dts/qcom/sm8650-mtp.dts | 235 +++++++++++++++++++++++++++++++- 1 file changed, 234 insertions(+), 1 deletion(-) diff --git a/arch/arm64/boot/dts/qcom/sm8650-mtp.dts b/arch/arm64/boot/dts/qcom/sm8650-mtp.dts index 5738791fea2a..83412d4914b9 100644 --- a/arch/arm64/boot/dts/qcom/sm8650-mtp.dts +++ b/arch/arm64/boot/dts/qcom/sm8650-mtp.dts @@ -28,6 +28,44 @@ chosen { stdout-path = "serial0:115200n8"; }; + pmic-glink { + compatible = "qcom,sm8650-pmic-glink", + "qcom,sm8550-pmic-glink", + "qcom,pmic-glink"; + #address-cells = <1>; + #size-cells = <0>; + orientation-gpios = <&tlmm 29 GPIO_ACTIVE_HIGH>; + + connector@0 { + compatible = "usb-c-connector"; + reg = <0>; + + power-role = "dual"; + data-role = "dual"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + pmic_glink_hs_in: endpoint { + remote-endpoint = <&usb_1_dwc3_hs>; + }; + }; + + port@1 { + reg = <1>; + + pmic_glink_ss_in: endpoint { + remote-endpoint = <&usb_1_dwc3_ss>; + }; + }; + }; + }; + }; + vph_pwr: vph-pwr-regulator { compatible = "regulator-fixed"; @@ -77,6 +115,9 @@ vreg_l2b_3p0: ldo2 { regulator-min-microvolt = <3008000>; regulator-max-microvolt = <3008000>; regulator-initial-mode = ; + regulator-allow-set-load; + regulator-allowed-modes = ; }; vreg_l5b_3p1: ldo5 { @@ -389,6 +430,106 @@ vreg_l3i_1p2: ldo3 { }; }; +&dispcc { + status = "okay"; +}; + +&mdss { + status = "okay"; +}; + +&mdss_dsi0 { + vdda-supply = <&vreg_l3i_1p2>; + + status = "okay"; + + panel@0 { + compatible = "visionox,vtdr6130"; + reg = <0>; + + reset-gpios = <&tlmm 133 GPIO_ACTIVE_LOW>; + + vddio-supply = <&vreg_l12b_1p8>; + vci-supply = <&vreg_l13b_3p0>; + vdd-supply = <&vreg_l11b_1p2>; + + pinctrl-0 = <&disp0_resetn_active>, <&mdp_vsync_active>; + pinctrl-1 = <&disp0_resetn_suspend>, <&mdp_vsync_suspend>; + pinctrl-names = "default", "sleep"; + + port { + panel0_in: endpoint { + remote-endpoint = <&mdss_dsi0_out>; + }; + }; + }; +}; + +&mdss_dsi0_out { + remote-endpoint = <&panel0_in>; + data-lanes = <0 1 2 3>; +}; + +&mdss_dsi0_phy { + vdds-supply = <&vreg_l1i_0p88>; + + status = "okay"; +}; + +&mdss_mdp { + status = "okay"; +}; + +&pcie_1_phy_aux_clk { + clock-frequency = <1000>; +}; + +&pcie0 { + wake-gpios = <&tlmm 96 GPIO_ACTIVE_HIGH>; + perst-gpios = <&tlmm 94 GPIO_ACTIVE_LOW>; + + pinctrl-0 = <&pcie0_default_state>; + pinctrl-names = "default"; + + status = "okay"; +}; + +&pcie0_phy { + vdda-phy-supply = <&vreg_l1i_0p88>; + vdda-pll-supply = <&vreg_l3i_1p2>; + + status = "okay"; +}; + +&pcie1 { + wake-gpios = <&tlmm 99 GPIO_ACTIVE_HIGH>; + perst-gpios = <&tlmm 97 GPIO_ACTIVE_LOW>; + + pinctrl-0 = <&pcie1_default_state>; + pinctrl-names = "default"; + + status = "okay"; +}; + +&pcie1_phy { + vdda-phy-supply = <&vreg_l3e_0p9>; + vdda-pll-supply = <&vreg_l3i_1p2>; + vdda-qref-supply = <&vreg_l1i_0p88>; + + status = "okay"; +}; + +&pm8550_gpios { + sdc2_card_det_n: sdc2-card-det-state { + pins = "gpio12"; + function = "normal"; + bias-pull-up; + input-enable; + output-disable; + power-source = <1>; /* 1.8 V */ + }; +}; + &pm8550b_eusb2_repeater { vdd18-supply = <&vreg_l15b_1p8>; vdd3-supply = <&vreg_l5b_3p1>; @@ -398,18 +539,101 @@ &qupv3_id_1 { status = "okay"; }; +&remoteproc_adsp { + firmware-name = "qcom/sm8650/adsp.mbn", + "qcom/sm8650/adsp_dtb.mbn"; + + status = "okay"; +}; + +&remoteproc_cdsp { + firmware-name = "qcom/sm8650/cdsp.mbn", + "qcom/sm8650/cdsp_dtb.mbn"; + + status = "okay"; +}; + +&remoteproc_mpss { + firmware-name = "qcom/sm8650/modem.mbn", + "qcom/sm8650/modem_dtb.mbn"; + + status = "okay"; +}; + +&sdhc_2 { + cd-gpios = <&pm8550_gpios 12 GPIO_ACTIVE_LOW>; + + vmmc-supply = <&vreg_l9b_2p9>; + vqmmc-supply = <&vreg_l8b_1p8>; + bus-width = <4>; + no-sdio; + no-mmc; + + pinctrl-0 = <&sdc2_default>, <&sdc2_card_det_n>; + pinctrl-1 = <&sdc2_sleep>, <&sdc2_card_det_n>; + pinctrl-names = "default", "sleep"; + + status = "okay"; +}; + &sleep_clk { clock-frequency = <32000>; }; &tlmm { gpio-reserved-ranges = <32 8>; + + disp0_resetn_active: disp0-resetn-active-state { + pins = "gpio133"; + function = "gpio"; + drive-strength = <8>; + bias-disable; + }; + + disp0_resetn_suspend: disp0-resetn-suspend-state { + pins = "gpio133"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + mdp_vsync_active: mdp-vsync-active-state { + pins = "gpio86"; + function = "mdp_vsync"; + drive-strength = <2>; + bias-pull-down; + }; + + mdp_vsync_suspend: mdp-vsync-suspend-state { + pins = "gpio86"; + function = "mdp_vsync"; + drive-strength = <2>; + bias-pull-down; + }; }; &uart15 { status = "okay"; }; +&ufs_mem_hc { + reset-gpios = <&tlmm 210 GPIO_ACTIVE_LOW>; + + vcc-supply = <&vreg_l17b_2p5>; + vcc-max-microamp = <1300000>; + vccq-supply = <&vreg_l1c_1p2>; + vccq-max-microamp = <1200000>; + + status = "okay"; +}; + +&ufs_mem_phy { + vdda-phy-supply = <&vreg_l1d_0p88>; + vdda-pll-supply = <&vreg_l3i_1p2>; + + status = "okay"; +}; + /* * DPAUX -> WCD9395 -> USB_SBU -> USB-C * eUSB2 DP/DM -> PM85550HS -> eUSB2 DP/DM -> USB-C @@ -421,7 +645,16 @@ &usb_1 { }; &usb_1_dwc3 { - dr_mode = "peripheral"; + dr_mode = "otg"; + usb-role-switch; +}; + +&usb_1_dwc3_hs { + remote-endpoint = <&pmic_glink_hs_in>; +}; + +&usb_1_dwc3_ss { + remote-endpoint = <&pmic_glink_ss_in>; }; &usb_1_hsphy { From patchwork Tue Nov 21 11:00:07 2023 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Neil Armstrong X-Patchwork-Id: 13462831 Authentication-Results: smtp.subspace.kernel.org; dkim=pass (2048-bit key) header.d=linaro.org header.i=@linaro.org header.b="KntxO/Um" Received: from mail-lj1-x22c.google.com (mail-lj1-x22c.google.com [IPv6:2a00:1450:4864:20::22c]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 8697A186 for ; Tue, 21 Nov 2023 03:00:18 -0800 (PST) Received: by mail-lj1-x22c.google.com with SMTP id 38308e7fff4ca-2c876e44157so34106601fa.2 for ; Tue, 21 Nov 2023 03:00:18 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=linaro.org; s=google; t=1700564416; x=1701169216; darn=vger.kernel.org; h=cc:to:in-reply-to:references:message-id:content-transfer-encoding :mime-version:subject:date:from:from:to:cc:subject:date:message-id :reply-to; bh=suXVDrXbdcl3hiQV4w7h/YnoQgstL3MlxG7ceiqyqWQ=; b=KntxO/UmqoUUfAql8RWYqqOFJXgR3Ctgn5W1zM6X3kQb3psCgGSsv4jmGPwbQkdToD 0VxzQ9Y7X8SkqRTzz7+m0I1l9fn1IxbydhKwE/u5XLVlYKXU3VkTjY4FD++4SJUt5q+K iUPPirAADcxY1RnY8ehfDUZhL6sR8dA3KFWYAYq2uhZM8KpcfQrv7+Rsi7aMw4Wzyllb LR5V4F7Nix5+gyWOMN6GvoDgfw1jCtzVpiezInmbC4Vl/jQGHkRJ7+NLtsAfSgNMrPfo Dgwa47Ip78ulePeq2xkK5+SyODEpJyFDy80e/h5/KE47Blv5JGt9e7wVqbUp0UIgcywe XwnQ== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20230601; t=1700564416; x=1701169216; h=cc:to:in-reply-to:references:message-id:content-transfer-encoding :mime-version:subject:date:from:x-gm-message-state:from:to:cc :subject:date:message-id:reply-to; bh=suXVDrXbdcl3hiQV4w7h/YnoQgstL3MlxG7ceiqyqWQ=; b=MucdWOavtADeakKSc22Yn3JQznbp/KgVQv9r9zUanwqllwYJp154rvEflUf0vjiTzO /sTXRdJq8MGMufl88Jmc1SiVeV6AGKbf9KHXFQ977MVQhq23cxQC3lm/lEiAE6TvNsFt J/o40z9LqHE/mgfvhru+m/P3VGA/hDXSm9WbEtGdXLRXFhY4XC/f+skiyAfRw6dNocZA yAMTEeNXtCeCEWLP7ybASIRkyquaNe4wGRDFI9ZV0qmEyeofOBEbZFDLnr9FPxlF2LSv /4VAt9hTFFcTCKby/9SKt9AM115+HMPK/nMG7ljHYu8Xg1FdsrlGmWXBhm/ADOQ7EPMj M/6w== X-Gm-Message-State: AOJu0YzFh4OpElVmeVjT90OOl5LN9xcWqI6GhiNQvAU/BCBRV5q1lnsk f4KvReDC4iGvTx9YSNH3yGZO5w== X-Google-Smtp-Source: AGHT+IHkE3aact1VajDnjh/3Cd2q/pYbV92o62XndvugmT7qPquOCtPtJ6lE2pF7XNGAWlGKRk/kAQ== X-Received: by 2002:a05:651c:10c7:b0:2b9:f13b:6139 with SMTP id l7-20020a05651c10c700b002b9f13b6139mr7603030ljn.20.1700564416332; Tue, 21 Nov 2023 03:00:16 -0800 (PST) Received: from arrakeen.starnux.net ([2a01:e0a:982:cbb0:8261:5fff:fe11:bdda]) by smtp.gmail.com with ESMTPSA id f1-20020adff581000000b00332c0e934aasm9028500wro.44.2023.11.21.03.00.15 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Tue, 21 Nov 2023 03:00:15 -0800 (PST) From: Neil Armstrong Date: Tue, 21 Nov 2023 12:00:07 +0100 Subject: [PATCH v3 8/8] arm64: dts: qcom: sm8650-qrd: add interconnect dependent device nodes Precedence: bulk X-Mailing-List: linux-arm-msm@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 Message-Id: <20231121-topic-sm8650-upstream-dt-v3-8-db9d0507ffd3@linaro.org> References: <20231121-topic-sm8650-upstream-dt-v3-0-db9d0507ffd3@linaro.org> In-Reply-To: <20231121-topic-sm8650-upstream-dt-v3-0-db9d0507ffd3@linaro.org> To: Andy Gross , Bjorn Andersson , Konrad Dybcio , Rob Herring , Krzysztof Kozlowski , Conor Dooley Cc: linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, Neil Armstrong X-Mailer: b4 0.12.3 X-Developer-Signature: v=1; a=openpgp-sha256; l=6618; i=neil.armstrong@linaro.org; h=from:subject:message-id; bh=s8Jug7UzjSJUjX2kmC+Rd7PGDEaDh2r9luvG/3xwuDc=; b=owEBbQKS/ZANAwAKAXfc29rIyEnRAcsmYgBlXI225/qNqRa1tRwBvsrBd156+1/PAKOh/xh3dSXG hj99OqeJAjMEAAEKAB0WIQQ9U8YmyFYF/h30LIt33NvayMhJ0QUCZVyNtgAKCRB33NvayMhJ0QP1EA CD6pxbPy3N48mjR3jozx39EyatDsoglotKsaAhtMYFHmTMdK+ivHH9+FBnJRDw3aQttHJhG7saPAZq KWbA27uolw8c6xv+GDZAlIP49zj30YY1NgGancLLgqE5b8Bbn5aWNk+fYAAMQ5UxKsv46ckQPcz4NT cWlhMXu4VIcaR8J4xFeqBnVOirzilbaekK+iwYMApCJRCoTtXkwi80NUPBkH5LJFL4+nqR9PyGoPSc Ry0pHZeA6z7cY736n5x4xp2KrDS1qHJ1qreDAYY8DD6fNqsoHy7eNKSvlH1fqMwmfi0TQ3aa9ffF4N bzxei7330NM678RWkcTvJEKqHd6KA2G4AZCwkrZ2XYz0rU2MM03eyDL7fddIAKvY18Vt5Vj7sysXHi 21UUHJVNtr9SV1vMumbnHa0y1vGRxdyJYdqqXVIxGlHbe2vICsSWehY3serx0k6Hr3FEz9owFERsBK /NXB5EzFHnvmj+4Ngi58DktdQry1ctLJAQO+kyooqpJLU4y/XDvoTikrTAZ4/hkhacgq/jCGfCj+KE kqL5l1rBUIPVDr7k/p12uYPQzkp7mp7jcAFEudkSEM2VRra2PE2wgwOlRYrSQ4+Sfeb/RDMQQlDdwl 1YVaZ+ZMjcWKo8ChOPmsHBpgDjo62AhXzn1Sb/hw2qzQEwei1nETcFAuAd0A== X-Developer-Key: i=neil.armstrong@linaro.org; a=openpgp; fpr=89EC3D058446217450F22848169AB7B1A4CFF8AE Now interconnect dependent devices are added in sm8650 DTSI, now enable more devices for the Qualcomm SM8650 QRD board: - PCIe - Display - DSPs - SDCard - UFS - USB role switch with PMIC Glink - Bluetooth Signed-off-by: Neil Armstrong --- arch/arm64/boot/dts/qcom/sm8650-qrd.dts | 275 +++++++++++++++++++++++++++++++- 1 file changed, 274 insertions(+), 1 deletion(-) diff --git a/arch/arm64/boot/dts/qcom/sm8650-qrd.dts b/arch/arm64/boot/dts/qcom/sm8650-qrd.dts index f5ce4c889680..b41f90d817bb 100644 --- a/arch/arm64/boot/dts/qcom/sm8650-qrd.dts +++ b/arch/arm64/boot/dts/qcom/sm8650-qrd.dts @@ -23,6 +23,7 @@ / { aliases { serial0 = &uart15; + serial1 = &uart14; }; chosen { @@ -45,6 +46,44 @@ key-volume-up { }; }; + pmic-glink { + compatible = "qcom,sm8650-pmic-glink", + "qcom,sm8550-pmic-glink", + "qcom,pmic-glink"; + #address-cells = <1>; + #size-cells = <0>; + orientation-gpios = <&tlmm 29 GPIO_ACTIVE_HIGH>; + + connector@0 { + compatible = "usb-c-connector"; + reg = <0>; + + power-role = "dual"; + data-role = "dual"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + pmic_glink_hs_in: endpoint { + remote-endpoint = <&usb_1_dwc3_hs>; + }; + }; + + port@1 { + reg = <1>; + + pmic_glink_ss_in: endpoint { + remote-endpoint = <&usb_1_dwc3_ss>; + }; + }; + }; + }; + }; + vph_pwr: vph-pwr-regulator { compatible = "regulator-fixed"; @@ -399,6 +438,81 @@ vreg_l3i_1p2: ldo3 { }; }; +&dispcc { + status = "okay"; +}; + +&gpi_dma1 { + status = "okay"; +}; + +&mdss { + status = "okay"; +}; + +&mdss_dsi0 { + vdda-supply = <&vreg_l3i_1p2>; + + status = "okay"; + + panel@0 { + compatible = "visionox,vtdr6130"; + reg = <0>; + + reset-gpios = <&tlmm 133 GPIO_ACTIVE_LOW>; + + vddio-supply = <&vreg_l12b_1p8>; + vci-supply = <&vreg_l13b_3p0>; + vdd-supply = <&vreg_l11b_1p2>; + + pinctrl-0 = <&disp0_resetn_active>, <&mdp_vsync_active>; + pinctrl-1 = <&disp0_resetn_suspend>, <&mdp_vsync_suspend>; + pinctrl-names = "default", "sleep"; + + port { + panel0_in: endpoint { + remote-endpoint = <&mdss_dsi0_out>; + }; + }; + }; +}; + +&mdss_dsi0_out { + remote-endpoint = <&panel0_in>; + data-lanes = <0 1 2 3>; +}; + +&mdss_dsi0_phy { + vdds-supply = <&vreg_l1i_0p88>; + + status = "okay"; +}; + +&mdss_mdp { + status = "okay"; +}; + +&pcie_1_phy_aux_clk { + clock-frequency = <1000>; +}; + +&pcie0 { + wake-gpios = <&tlmm 96 GPIO_ACTIVE_HIGH>; + perst-gpios = <&tlmm 94 GPIO_ACTIVE_LOW>; + + pinctrl-0 = <&pcie0_default_state>; + pinctrl-names = "default"; + + status = "okay"; +}; + +&pcie0_phy { + vdda-phy-supply = <&vreg_l1i_0p88>; + vdda-pll-supply = <&vreg_l3i_1p2>; + + status = "okay"; +}; + &pon_pwrkey { status = "okay"; }; @@ -479,22 +593,172 @@ &pmk8550_rtc { status = "okay"; }; +&qupv3_id_0 { + status = "okay"; +}; + &qupv3_id_1 { status = "okay"; }; +&remoteproc_adsp { + firmware-name = "qcom/sm8650/adsp.mbn", + "qcom/sm8650/adsp_dtb.mbn"; + + status = "okay"; +}; + +&remoteproc_cdsp { + firmware-name = "qcom/sm8650/cdsp.mbn", + "qcom/sm8650/cdsp_dtb.mbn"; + + status = "okay"; +}; + +&remoteproc_mpss { + firmware-name = "qcom/sm8650/modem.mbn", + "qcom/sm8650/modem_dtb.mbn"; + + status = "okay"; +}; + &sleep_clk { clock-frequency = <32000>; }; +&spi4 { + status = "okay"; + + touchscreen@0 { + compatible = "goodix,gt9916"; + reg = <0>; + + interrupt-parent = <&tlmm>; + interrupts = <162 IRQ_TYPE_LEVEL_LOW>; + + reset-gpios = <&tlmm 161 GPIO_ACTIVE_LOW>; + + avdd-supply = <&vreg_l14b_3p2>; + + spi-max-frequency = <1000000>; + + touchscreen-size-x = <1080>; + touchscreen-size-y = <2400>; + + pinctrl-0 = <&ts_irq>, <&ts_reset>; + pinctrl-names = "default"; + }; +}; + &tlmm { gpio-reserved-ranges = <32 8>; + + bt_default: bt-default-state { + bt-en-pins { + pins = "gpio17"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + }; + + sw-ctrl-pins { + pins = "gpio18"; + function = "gpio"; + bias-pull-down; + }; + }; + + disp0_resetn_active: disp0-resetn-active-state { + pins = "gpio133"; + function = "gpio"; + drive-strength = <8>; + bias-disable; + }; + + disp0_resetn_suspend: disp0-resetn-suspend-state { + pins = "gpio133"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + mdp_vsync_active: mdp-vsync-active-state { + pins = "gpio86"; + function = "mdp_vsync"; + drive-strength = <2>; + bias-pull-down; + }; + + mdp_vsync_suspend: mdp-vsync-suspend-state { + pins = "gpio86"; + function = "mdp_vsync"; + drive-strength = <2>; + bias-pull-down; + }; + + ts_irq: ts-irq-state { + pins = "gpio161"; + function = "gpio"; + drive-strength = <8>; + bias-pull-up; + output-disable; + }; + + ts_reset: ts-reset-state { + pins = "gpio162"; + function = "gpio"; + drive-strength = <8>; + bias-pull-up; + }; +}; + +&uart14 { + status = "okay"; + + bluetooth { + compatible = "qcom,wcn7850-bt"; + + clocks = <&rpmhcc RPMH_RF_CLK1>; + + vddio-supply = <&vreg_l3c_1p2>; + vddaon-supply = <&vreg_l15b_1p8>; + vdddig-supply = <&vreg_s3c_0p9>; + vddrfa0p8-supply = <&vreg_s3c_0p9>; + vddrfa1p2-supply = <&vreg_s1c_1p2>; + vddrfa1p9-supply = <&vreg_s6c_1p8>; + + max-speed = <3200000>; + + enable-gpios = <&tlmm 17 GPIO_ACTIVE_HIGH>; + swctrl-gpios = <&tlmm 18 GPIO_ACTIVE_HIGH>; + + pinctrl-0 = <&bt_default>; + pinctrl-names = "default"; + }; }; &uart15 { status = "okay"; }; +&ufs_mem_hc { + reset-gpios = <&tlmm 210 GPIO_ACTIVE_LOW>; + + vcc-supply = <&vreg_l17b_2p5>; + vcc-max-microamp = <1300000>; + vccq-supply = <&vreg_l1c_1p2>; + vccq-max-microamp = <1200000>; + + status = "okay"; +}; + +&ufs_mem_phy { + vdda-phy-supply = <&vreg_l1d_0p88>; + vdda-pll-supply = <&vreg_l3i_1p2>; + + status = "okay"; +}; + /* * DPAUX -> WCD9395 -> USB_SBU -> USB-C * eUSB2 DP/DM -> PM85550HS -> eUSB2 DP/DM -> WCD9395 -> USB-C @@ -506,7 +770,16 @@ &usb_1 { }; &usb_1_dwc3 { - dr_mode = "peripheral"; + dr_mode = "otg"; + usb-role-switch; +}; + +&usb_1_dwc3_hs { + remote-endpoint = <&pmic_glink_hs_in>; +}; + +&usb_1_dwc3_ss { + remote-endpoint = <&pmic_glink_ss_in>; }; &usb_1_hsphy {