From patchwork Sat Dec 2 12:36:07 2023 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Can Guo X-Patchwork-Id: 13476920 Authentication-Results: smtp.subspace.kernel.org; dkim=pass (2048-bit key) header.d=quicinc.com header.i=@quicinc.com header.b="pQKS4XaQ" Received: from mx0b-0031df01.pphosted.com (mx0b-0031df01.pphosted.com [205.220.180.131]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id D024A10C2; Sat, 2 Dec 2023 04:37:29 -0800 (PST) Received: from pps.filterd (m0279870.ppops.net [127.0.0.1]) by mx0a-0031df01.pphosted.com (8.17.1.19/8.17.1.19) with ESMTP id 3B2CaeYh009522; Sat, 2 Dec 2023 12:36:40 GMT DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=quicinc.com; h=from : to : cc : subject : date : message-id : in-reply-to : references; s=qcppdkim1; bh=CvdWa6K9CXgXFHOytyGULvAoyyhKGAcpMZLQsXKRMdo=; b=pQKS4XaQYg4PsAacoglyhB2xfHDpVgGKwTv+e0sZSJnpuG33EKe3/3Du8mcp99h755VJ RH2Hv+KQ9PpAbQoe3ftk9ipL8x1zguk3/B2UytZt0WKF4ppJaQkkTrtYIM/4iYLwgSew kNFELEhHVveBj3p2BuCZDxSsISkn85bmV1ldayI/c4Uo7+LLpWMlmq7yoo0kZ3Y1GSYE +vFBCDYqQagrBXN7gh0P7bT/jCD6+T8qMq4X6QCp62NiA6Z5cCmeJluwGseGBh7T9Own xFMsuT/WehMtr2r/DxOYqv/39ijN3raQFerbWymTvC+ndHtyueSi+d/Ooi52Cu5xtmVO JQ== Received: from nasanppmta02.qualcomm.com (i-global254.qualcomm.com [199.106.103.254]) by mx0a-0031df01.pphosted.com (PPS) with ESMTPS id 3uqvp10jhs-1 (version=TLSv1.2 cipher=ECDHE-RSA-AES256-GCM-SHA384 bits=256 verify=NOT); Sat, 02 Dec 2023 12:36:39 +0000 Received: from pps.filterd (NASANPPMTA02.qualcomm.com [127.0.0.1]) by NASANPPMTA02.qualcomm.com (8.17.1.5/8.17.1.5) with ESMTP id 3B2CaciW018649; Sat, 2 Dec 2023 12:36:38 GMT Received: from pps.reinject (localhost [127.0.0.1]) by NASANPPMTA02.qualcomm.com (PPS) with ESMTP id 3uqwnkka7x-1; Sat, 02 Dec 2023 12:36:38 +0000 Received: from NASANPPMTA02.qualcomm.com (NASANPPMTA02.qualcomm.com [127.0.0.1]) by pps.reinject (8.17.1.5/8.17.1.5) with ESMTP id 3B2CacKt018644; Sat, 2 Dec 2023 12:36:38 GMT Received: from stor-dylan.qualcomm.com (stor-dylan.qualcomm.com [192.168.140.207]) by NASANPPMTA02.qualcomm.com (PPS) with ESMTP id 3B2Cac6d018643; Sat, 02 Dec 2023 12:36:38 +0000 Received: by stor-dylan.qualcomm.com (Postfix, from userid 359480) id 61D3920A90; Sat, 2 Dec 2023 04:36:37 -0800 (PST) From: Can Guo To: quic_cang@quicinc.com, bvanassche@acm.org, mani@kernel.org, adrian.hunter@intel.com, vkoul@kernel.org, beanhuo@micron.com, avri.altman@wdc.com, junwoo80.lee@samsung.com, martin.petersen@oracle.com Cc: linux-scsi@vger.kernel.org, linux-arm-msm@vger.kernel.org, Alim Akhtar , "James E.J. Bottomley" , Krzysztof Kozlowski , Peter Wang , Stanley Jhu , Andy Gross , Bjorn Andersson , Konrad Dybcio , Matthias Brugger , AngeloGioacchino Del Regno , Stanley Chu , =?utf-8?q?Uwe_Kleine-K=C3=B6nig?= , Nitin Rawat , Brian Masney , linux-arm-kernel@lists.infradead.org (moderated list:ARM/SAMSUNG S3C, S5P AND EXYNOS ARM ARCHITECTURES), linux-samsung-soc@vger.kernel.org (open list:ARM/SAMSUNG S3C, S5P AND EXYNOS ARM ARCHITECTURES), linux-kernel@vger.kernel.org (open list), linux-mediatek@lists.infradead.org (moderated list:UNIVERSAL FLASH STORAGE HOST CONTROLLER DRIVER...) Subject: [PATCH v8 01/10] scsi: ufs: host: Rename structure ufs_dev_params to ufs_host_params Date: Sat, 2 Dec 2023 04:36:07 -0800 Message-Id: <1701520577-31163-2-git-send-email-quic_cang@quicinc.com> X-Mailer: git-send-email 2.7.4 In-Reply-To: <1701520577-31163-1-git-send-email-quic_cang@quicinc.com> References: <1701520577-31163-1-git-send-email-quic_cang@quicinc.com> X-QCInternal: smtphost X-QCInternal: smtphost X-Proofpoint-Virus-Version: vendor=nai engine=6200 definitions=5800 signatures=585085 X-Proofpoint-Virus-Version: vendor=nai engine=6200 definitions=5800 signatures=585085 X-Proofpoint-GUID: bP0Rh2JFwXNhrqRFvp6QD-b9n_jhu5KE X-Proofpoint-ORIG-GUID: bP0Rh2JFwXNhrqRFvp6QD-b9n_jhu5KE X-Proofpoint-Virus-Version: vendor=baseguard engine=ICAP:2.0.272,Aquarius:18.0.997,Hydra:6.0.619,FMLib:17.11.176.26 definitions=2023-12-02_10,2023-11-30_01,2023-05-22_02 X-Proofpoint-Spam-Details: rule=outbound_notspam policy=outbound score=0 bulkscore=0 impostorscore=0 suspectscore=0 malwarescore=0 phishscore=0 spamscore=0 clxscore=1015 priorityscore=1501 adultscore=0 mlxscore=0 lowpriorityscore=0 mlxlogscore=999 classifier=spam adjust=0 reason=mlx scancount=1 engine=8.12.0-2311060000 definitions=main-2312020094 Precedence: bulk X-Mailing-List: linux-scsi@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: Structure ufs_dev_params is actually used in UFS host vendor drivers to declare host specific power mode parameters, like ufs__params or host_cap, which makes the code not very straightforward to read. Rename the structure ufs_dev_params to ufs_host_params and unify the declarations in all vendor drivers to host_params. In addition, rename the two functions ufshcd_init_pwr_dev_param() and ufshcd_get_pwr_dev_param() which work based on the ufs_host_params to ufshcd_init_host_params() and ufshcd_negotiate_pwr_params() respectively to avoid confusions. This change does not change any functionalities or logic. Acked-by: Andrew Halaney Reviewed-by: Nitin Rawat Reviewed-by: Manivannan Sadhasivam Reviewed-by: Bart Van Assche Signed-off-by: Can Guo Reviewed-by: Peter Wang --- drivers/ufs/host/ufs-exynos.c | 7 ++-- drivers/ufs/host/ufs-hisi.c | 11 +++---- drivers/ufs/host/ufs-mediatek.c | 12 +++---- drivers/ufs/host/ufs-qcom.c | 12 +++---- drivers/ufs/host/ufshcd-pltfrm.c | 69 ++++++++++++++++++++-------------------- drivers/ufs/host/ufshcd-pltfrm.h | 10 +++--- 6 files changed, 57 insertions(+), 64 deletions(-) diff --git a/drivers/ufs/host/ufs-exynos.c b/drivers/ufs/host/ufs-exynos.c index 71bd6db..734d40f 100644 --- a/drivers/ufs/host/ufs-exynos.c +++ b/drivers/ufs/host/ufs-exynos.c @@ -765,7 +765,7 @@ static int exynos_ufs_pre_pwr_mode(struct ufs_hba *hba, { struct exynos_ufs *ufs = ufshcd_get_variant(hba); struct phy *generic_phy = ufs->phy; - struct ufs_dev_params ufs_exynos_cap; + struct ufs_host_params host_params; int ret; if (!dev_req_params) { @@ -774,10 +774,9 @@ static int exynos_ufs_pre_pwr_mode(struct ufs_hba *hba, goto out; } - ufshcd_init_pwr_dev_param(&ufs_exynos_cap); + ufshcd_init_host_params(&host_params); - ret = ufshcd_get_pwr_dev_param(&ufs_exynos_cap, - dev_max_params, dev_req_params); + ret = ufshcd_negotiate_pwr_params(&host_params, dev_max_params, dev_req_params); if (ret) { pr_err("%s: failed to determine capabilities\n", __func__); goto out; diff --git a/drivers/ufs/host/ufs-hisi.c b/drivers/ufs/host/ufs-hisi.c index 0229ac0..5ee73ff 100644 --- a/drivers/ufs/host/ufs-hisi.c +++ b/drivers/ufs/host/ufs-hisi.c @@ -293,9 +293,9 @@ static int ufs_hisi_link_startup_notify(struct ufs_hba *hba, return err; } -static void ufs_hisi_set_dev_cap(struct ufs_dev_params *hisi_param) +static void ufs_hisi_set_dev_cap(struct ufs_host_params *host_params) { - ufshcd_init_pwr_dev_param(hisi_param); + ufshcd_init_host_params(host_params); } static void ufs_hisi_pwr_change_pre_change(struct ufs_hba *hba) @@ -365,7 +365,7 @@ static int ufs_hisi_pwr_change_notify(struct ufs_hba *hba, struct ufs_pa_layer_attr *dev_max_params, struct ufs_pa_layer_attr *dev_req_params) { - struct ufs_dev_params ufs_hisi_cap; + struct ufs_host_params host_params; int ret = 0; if (!dev_req_params) { @@ -377,9 +377,8 @@ static int ufs_hisi_pwr_change_notify(struct ufs_hba *hba, switch (status) { case PRE_CHANGE: - ufs_hisi_set_dev_cap(&ufs_hisi_cap); - ret = ufshcd_get_pwr_dev_param(&ufs_hisi_cap, - dev_max_params, dev_req_params); + ufs_hisi_set_dev_cap(&host_params); + ret = ufshcd_negotiate_pwr_params(&host_params, dev_max_params, dev_req_params); if (ret) { dev_err(hba->dev, "%s: failed to determine capabilities\n", __func__); diff --git a/drivers/ufs/host/ufs-mediatek.c b/drivers/ufs/host/ufs-mediatek.c index fc61790..776bca4 100644 --- a/drivers/ufs/host/ufs-mediatek.c +++ b/drivers/ufs/host/ufs-mediatek.c @@ -996,16 +996,14 @@ static int ufs_mtk_pre_pwr_change(struct ufs_hba *hba, struct ufs_pa_layer_attr *dev_req_params) { struct ufs_mtk_host *host = ufshcd_get_variant(hba); - struct ufs_dev_params host_cap; + struct ufs_host_params host_params; int ret; - ufshcd_init_pwr_dev_param(&host_cap); - host_cap.hs_rx_gear = UFS_HS_G5; - host_cap.hs_tx_gear = UFS_HS_G5; + ufshcd_init_host_params(&host_params); + host_params.hs_rx_gear = UFS_HS_G5; + host_params.hs_tx_gear = UFS_HS_G5; - ret = ufshcd_get_pwr_dev_param(&host_cap, - dev_max_params, - dev_req_params); + ret = ufshcd_negotiate_pwr_params(&host_params, dev_max_params, dev_req_params); if (ret) { pr_info("%s: failed to determine capabilities\n", __func__); diff --git a/drivers/ufs/host/ufs-qcom.c b/drivers/ufs/host/ufs-qcom.c index 96cb8b5..197c5a5 100644 --- a/drivers/ufs/host/ufs-qcom.c +++ b/drivers/ufs/host/ufs-qcom.c @@ -898,7 +898,7 @@ static int ufs_qcom_pwr_change_notify(struct ufs_hba *hba, struct ufs_pa_layer_attr *dev_req_params) { struct ufs_qcom_host *host = ufshcd_get_variant(hba); - struct ufs_dev_params ufs_qcom_cap; + struct ufs_host_params host_params; int ret = 0; if (!dev_req_params) { @@ -908,15 +908,13 @@ static int ufs_qcom_pwr_change_notify(struct ufs_hba *hba, switch (status) { case PRE_CHANGE: - ufshcd_init_pwr_dev_param(&ufs_qcom_cap); - ufs_qcom_cap.hs_rate = UFS_QCOM_LIMIT_HS_RATE; + ufshcd_init_host_params(&host_params); + host_params.hs_rate = UFS_QCOM_LIMIT_HS_RATE; /* This driver only supports symmetic gear setting i.e., hs_tx_gear == hs_rx_gear */ - ufs_qcom_cap.hs_tx_gear = ufs_qcom_cap.hs_rx_gear = ufs_qcom_get_hs_gear(hba); + host_params.hs_tx_gear = host_params.hs_rx_gear = ufs_qcom_get_hs_gear(hba); - ret = ufshcd_get_pwr_dev_param(&ufs_qcom_cap, - dev_max_params, - dev_req_params); + ret = ufshcd_negotiate_pwr_params(&host_params, dev_max_params, dev_req_params); if (ret) { dev_err(hba->dev, "%s: failed to determine capabilities\n", __func__); diff --git a/drivers/ufs/host/ufshcd-pltfrm.c b/drivers/ufs/host/ufshcd-pltfrm.c index da2558e..1633edc 100644 --- a/drivers/ufs/host/ufshcd-pltfrm.c +++ b/drivers/ufs/host/ufshcd-pltfrm.c @@ -285,61 +285,60 @@ static int ufshcd_parse_operating_points(struct ufs_hba *hba) } /** - * ufshcd_get_pwr_dev_param - get finally agreed attributes for - * power mode change - * @pltfrm_param: pointer to platform parameters + * ufshcd_negotiate_pwr_params - find power mode settings that are supported by + both the controller and the device + * @host_params: pointer to host parameters * @dev_max: pointer to device attributes * @agreed_pwr: returned agreed attributes * * Return: 0 on success, non-zero value on failure. */ -int ufshcd_get_pwr_dev_param(const struct ufs_dev_params *pltfrm_param, - const struct ufs_pa_layer_attr *dev_max, - struct ufs_pa_layer_attr *agreed_pwr) +int ufshcd_negotiate_pwr_params(const struct ufs_host_params *host_params, + const struct ufs_pa_layer_attr *dev_max, + struct ufs_pa_layer_attr *agreed_pwr) { - int min_pltfrm_gear; + int min_host_gear; int min_dev_gear; bool is_dev_sup_hs = false; - bool is_pltfrm_max_hs = false; + bool is_host_max_hs = false; if (dev_max->pwr_rx == FAST_MODE) is_dev_sup_hs = true; - if (pltfrm_param->desired_working_mode == UFS_HS_MODE) { - is_pltfrm_max_hs = true; - min_pltfrm_gear = min_t(u32, pltfrm_param->hs_rx_gear, - pltfrm_param->hs_tx_gear); + if (host_params->desired_working_mode == UFS_HS_MODE) { + is_host_max_hs = true; + min_host_gear = min_t(u32, host_params->hs_rx_gear, + host_params->hs_tx_gear); } else { - min_pltfrm_gear = min_t(u32, pltfrm_param->pwm_rx_gear, - pltfrm_param->pwm_tx_gear); + min_host_gear = min_t(u32, host_params->pwm_rx_gear, + host_params->pwm_tx_gear); } /* - * device doesn't support HS but - * pltfrm_param->desired_working_mode is HS, - * thus device and pltfrm_param don't agree + * device doesn't support HS but host_params->desired_working_mode is HS, + * thus device and host_params don't agree */ - if (!is_dev_sup_hs && is_pltfrm_max_hs) { + if (!is_dev_sup_hs && is_host_max_hs) { pr_info("%s: device doesn't support HS\n", __func__); return -ENOTSUPP; - } else if (is_dev_sup_hs && is_pltfrm_max_hs) { + } else if (is_dev_sup_hs && is_host_max_hs) { /* * since device supports HS, it supports FAST_MODE. - * since pltfrm_param->desired_working_mode is also HS + * since host_params->desired_working_mode is also HS * then final decision (FAST/FASTAUTO) is done according * to pltfrm_params as it is the restricting factor */ - agreed_pwr->pwr_rx = pltfrm_param->rx_pwr_hs; + agreed_pwr->pwr_rx = host_params->rx_pwr_hs; agreed_pwr->pwr_tx = agreed_pwr->pwr_rx; } else { /* - * here pltfrm_param->desired_working_mode is PWM. + * here host_params->desired_working_mode is PWM. * it doesn't matter whether device supports HS or PWM, - * in both cases pltfrm_param->desired_working_mode will + * in both cases host_params->desired_working_mode will * determine the mode */ - agreed_pwr->pwr_rx = pltfrm_param->rx_pwr_pwm; + agreed_pwr->pwr_rx = host_params->rx_pwr_pwm; agreed_pwr->pwr_tx = agreed_pwr->pwr_rx; } @@ -349,9 +348,9 @@ int ufshcd_get_pwr_dev_param(const struct ufs_dev_params *pltfrm_param, * the same decision will be made for rx */ agreed_pwr->lane_tx = min_t(u32, dev_max->lane_tx, - pltfrm_param->tx_lanes); + host_params->tx_lanes); agreed_pwr->lane_rx = min_t(u32, dev_max->lane_rx, - pltfrm_param->rx_lanes); + host_params->rx_lanes); /* device maximum gear is the minimum between device rx and tx gears */ min_dev_gear = min_t(u32, dev_max->gear_rx, dev_max->gear_tx); @@ -364,26 +363,26 @@ int ufshcd_get_pwr_dev_param(const struct ufs_dev_params *pltfrm_param, * what is the gear, as it is the one that also decided previously what * pwr the device will be configured to. */ - if ((is_dev_sup_hs && is_pltfrm_max_hs) || - (!is_dev_sup_hs && !is_pltfrm_max_hs)) { + if ((is_dev_sup_hs && is_host_max_hs) || + (!is_dev_sup_hs && !is_host_max_hs)) { agreed_pwr->gear_rx = - min_t(u32, min_dev_gear, min_pltfrm_gear); + min_t(u32, min_dev_gear, min_host_gear); } else if (!is_dev_sup_hs) { agreed_pwr->gear_rx = min_dev_gear; } else { - agreed_pwr->gear_rx = min_pltfrm_gear; + agreed_pwr->gear_rx = min_host_gear; } agreed_pwr->gear_tx = agreed_pwr->gear_rx; - agreed_pwr->hs_rate = pltfrm_param->hs_rate; + agreed_pwr->hs_rate = host_params->hs_rate; return 0; } -EXPORT_SYMBOL_GPL(ufshcd_get_pwr_dev_param); +EXPORT_SYMBOL_GPL(ufshcd_negotiate_pwr_params); -void ufshcd_init_pwr_dev_param(struct ufs_dev_params *dev_param) +void ufshcd_init_host_params(struct ufs_host_params *host_params) { - *dev_param = (struct ufs_dev_params){ + *host_params = (struct ufs_host_params){ .tx_lanes = UFS_LANE_2, .rx_lanes = UFS_LANE_2, .hs_rx_gear = UFS_HS_G3, @@ -398,7 +397,7 @@ void ufshcd_init_pwr_dev_param(struct ufs_dev_params *dev_param) .desired_working_mode = UFS_HS_MODE, }; } -EXPORT_SYMBOL_GPL(ufshcd_init_pwr_dev_param); +EXPORT_SYMBOL_GPL(ufshcd_init_host_params); /** * ufshcd_pltfrm_init - probe routine of the driver diff --git a/drivers/ufs/host/ufshcd-pltfrm.h b/drivers/ufs/host/ufshcd-pltfrm.h index a86a3ad..df387be 100644 --- a/drivers/ufs/host/ufshcd-pltfrm.h +++ b/drivers/ufs/host/ufshcd-pltfrm.h @@ -10,7 +10,7 @@ #define UFS_PWM_MODE 1 #define UFS_HS_MODE 2 -struct ufs_dev_params { +struct ufs_host_params { u32 pwm_rx_gear; /* pwm rx gear to work in */ u32 pwm_tx_gear; /* pwm tx gear to work in */ u32 hs_rx_gear; /* hs rx gear to work in */ @@ -25,10 +25,10 @@ struct ufs_dev_params { u32 desired_working_mode; }; -int ufshcd_get_pwr_dev_param(const struct ufs_dev_params *dev_param, - const struct ufs_pa_layer_attr *dev_max, - struct ufs_pa_layer_attr *agreed_pwr); -void ufshcd_init_pwr_dev_param(struct ufs_dev_params *dev_param); +int ufshcd_negotiate_pwr_params(const struct ufs_host_params *host_params, + const struct ufs_pa_layer_attr *dev_max, + struct ufs_pa_layer_attr *agreed_pwr); +void ufshcd_init_host_params(struct ufs_host_params *host_params); int ufshcd_pltfrm_init(struct platform_device *pdev, const struct ufs_hba_variant_ops *vops); int ufshcd_populate_vreg(struct device *dev, const char *name, From patchwork Sat Dec 2 12:36:08 2023 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Can Guo X-Patchwork-Id: 13476916 Authentication-Results: smtp.subspace.kernel.org; dkim=pass (2048-bit key) header.d=quicinc.com header.i=@quicinc.com header.b="Gy/MbLlo" Received: from mx0a-0031df01.pphosted.com (mx0a-0031df01.pphosted.com [205.220.168.131]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 84D0112E; Sat, 2 Dec 2023 04:37:01 -0800 (PST) Received: from pps.filterd (m0279862.ppops.net [127.0.0.1]) by mx0a-0031df01.pphosted.com (8.17.1.19/8.17.1.19) with ESMTP id 3B2CaeTN027872; Sat, 2 Dec 2023 12:36:40 GMT DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=quicinc.com; h=from : to : cc : subject : date : message-id : in-reply-to : references; s=qcppdkim1; bh=hI4B+En5B8Tnj5LoYIYk/lWCpU5mfeoE4ccGSVr3iU4=; b=Gy/MbLlopk638E+m7O4Yn07hS5x0Q7WZF9CpHTCujkNbji7g1Lm/3nx+Ay6UAg7Z6dPO nHtFFE+cmSBMIrLPsNpvOw50Z/QHZ3oMNof8q2lcAD5uP1sM60FrMctCVMfBLKZxWe3/ 39p0enGp9DfJ7uT9T9BrnXCd85dRoH2ScjSJ2hVKEZDL4LAk9RuW7rm8ulzo+ENUDhjx +CzML75Bqh0U7WZcqAzGZ5HX6Un+OkYip2TLu26cPr8y+cpxlbo3KfmFjjPSAoA4IoeG WeVRefjwkHCiC09qi8AU16JdfMnrcdD6B14N2vQFH7qvQLZHv5qu8VDRm98aGpu6i96k /A== Received: from nasanppmta03.qualcomm.com (i-global254.qualcomm.com [199.106.103.254]) by mx0a-0031df01.pphosted.com (PPS) with ESMTPS id 3uqwbqggnd-1 (version=TLSv1.2 cipher=ECDHE-RSA-AES256-GCM-SHA384 bits=256 verify=NOT); Sat, 02 Dec 2023 12:36:40 +0000 Received: from pps.filterd (NASANPPMTA03.qualcomm.com [127.0.0.1]) by NASANPPMTA03.qualcomm.com (8.17.1.5/8.17.1.5) with ESMTP id 3B2Ca9qC017639; Sat, 2 Dec 2023 12:36:39 GMT Received: from pps.reinject (localhost [127.0.0.1]) by NASANPPMTA03.qualcomm.com (PPS) with ESMTP id 3uqwnkb9qk-1; Sat, 02 Dec 2023 12:36:39 +0000 Received: from NASANPPMTA03.qualcomm.com (NASANPPMTA03.qualcomm.com [127.0.0.1]) by pps.reinject (8.17.1.5/8.17.1.5) with ESMTP id 3B2CadXr018426; Sat, 2 Dec 2023 12:36:39 GMT Received: from stor-dylan.qualcomm.com (stor-dylan.qualcomm.com [192.168.140.207]) by NASANPPMTA03.qualcomm.com (PPS) with ESMTP id 3B2Cad4v018423; Sat, 02 Dec 2023 12:36:39 +0000 Received: by stor-dylan.qualcomm.com (Postfix, from userid 359480) id 661D120A90; Sat, 2 Dec 2023 04:36:38 -0800 (PST) From: Can Guo To: quic_cang@quicinc.com, bvanassche@acm.org, mani@kernel.org, adrian.hunter@intel.com, vkoul@kernel.org, beanhuo@micron.com, avri.altman@wdc.com, junwoo80.lee@samsung.com, martin.petersen@oracle.com Cc: linux-scsi@vger.kernel.org, linux-arm-msm@vger.kernel.org, Andy Gross , Bjorn Andersson , Konrad Dybcio , "James E.J. Bottomley" , linux-kernel@vger.kernel.org (open list) Subject: [PATCH v8 02/10] scsi: ufs: ufs-qcom: No need to set hs_rate after ufshcd_init_host_param() Date: Sat, 2 Dec 2023 04:36:08 -0800 Message-Id: <1701520577-31163-3-git-send-email-quic_cang@quicinc.com> X-Mailer: git-send-email 2.7.4 In-Reply-To: <1701520577-31163-1-git-send-email-quic_cang@quicinc.com> References: <1701520577-31163-1-git-send-email-quic_cang@quicinc.com> X-QCInternal: smtphost X-QCInternal: smtphost X-Proofpoint-Virus-Version: vendor=nai engine=6200 definitions=5800 signatures=585085 X-Proofpoint-Virus-Version: vendor=nai engine=6200 definitions=5800 signatures=585085 X-Proofpoint-ORIG-GUID: 3hsTozTYeMJKWV95K81hzMYBlPgR3CEf X-Proofpoint-GUID: 3hsTozTYeMJKWV95K81hzMYBlPgR3CEf X-Proofpoint-Virus-Version: vendor=baseguard engine=ICAP:2.0.272,Aquarius:18.0.997,Hydra:6.0.619,FMLib:17.11.176.26 definitions=2023-12-02_10,2023-11-30_01,2023-05-22_02 X-Proofpoint-Spam-Details: rule=outbound_notspam policy=outbound score=0 mlxscore=0 clxscore=1015 lowpriorityscore=0 priorityscore=1501 malwarescore=0 spamscore=0 suspectscore=0 bulkscore=0 adultscore=0 impostorscore=0 phishscore=0 mlxlogscore=999 classifier=spam adjust=0 reason=mlx scancount=1 engine=8.12.0-2311060000 definitions=main-2312020094 Precedence: bulk X-Mailing-List: linux-scsi@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: In ufs_qcom_pwr_change_notify(), host_params.hs_rate has been set to PA_HS_MODE_B by ufshcd_init_host_param(), hence remove the duplicated line of work. Meanwhile, removed the macro UFS_QCOM_LIMIT_HS_RATE as it is only used here. Reviewed-by: Nitin Rawat Reviewed-by: Manivannan Sadhasivam Reviewed-by: Andrew Halaney Signed-off-by: Can Guo --- drivers/ufs/host/ufs-qcom.c | 1 - drivers/ufs/host/ufs-qcom.h | 2 -- 2 files changed, 3 deletions(-) diff --git a/drivers/ufs/host/ufs-qcom.c b/drivers/ufs/host/ufs-qcom.c index 197c5a5..c21ff2c 100644 --- a/drivers/ufs/host/ufs-qcom.c +++ b/drivers/ufs/host/ufs-qcom.c @@ -909,7 +909,6 @@ static int ufs_qcom_pwr_change_notify(struct ufs_hba *hba, switch (status) { case PRE_CHANGE: ufshcd_init_host_params(&host_params); - host_params.hs_rate = UFS_QCOM_LIMIT_HS_RATE; /* This driver only supports symmetic gear setting i.e., hs_tx_gear == hs_rx_gear */ host_params.hs_tx_gear = host_params.hs_rx_gear = ufs_qcom_get_hs_gear(hba); diff --git a/drivers/ufs/host/ufs-qcom.h b/drivers/ufs/host/ufs-qcom.h index 9950a00..82cd143 100644 --- a/drivers/ufs/host/ufs-qcom.h +++ b/drivers/ufs/host/ufs-qcom.h @@ -27,8 +27,6 @@ #define SLOW 1 #define FAST 2 -#define UFS_QCOM_LIMIT_HS_RATE PA_HS_MODE_B - /* QCOM UFS host controller vendor specific registers */ enum { REG_UFS_SYS1CLK_1US = 0xC0, From patchwork Sat Dec 2 12:36:09 2023 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Can Guo X-Patchwork-Id: 13476924 Authentication-Results: smtp.subspace.kernel.org; dkim=pass (2048-bit key) header.d=quicinc.com header.i=@quicinc.com header.b="SDa1fCyF" Received: from mx0b-0031df01.pphosted.com (mx0b-0031df01.pphosted.com [205.220.180.131]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 7E41612D; Sat, 2 Dec 2023 04:40:35 -0800 (PST) Received: from pps.filterd (m0279872.ppops.net [127.0.0.1]) by mx0a-0031df01.pphosted.com (8.17.1.19/8.17.1.19) with ESMTP id 3B2CaaIH026043; Sat, 2 Dec 2023 12:36:42 GMT DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=quicinc.com; h=from : to : cc : subject : date : message-id : in-reply-to : references; s=qcppdkim1; bh=B1stBXweFHGLo0FZ562PYkOASJIgvjARx2einm+rVNQ=; b=SDa1fCyFzo+BusDl8U1oLOFlNYy7QCB2aefq4GIO5sL/IBSgXYZNqx7AaoTVfcnIrb/e syHEiCz+1MRJT/GQ66l4dFjviJ4wVo6AFM+i5jyLxXW+s01oBqsAyjmICoLmhBh0YxI4 ySZXJNGjZDahEG/SWap5phhIQ7YOnLE/eFG6xpfhXFyXlH6B2bD8aGUWRsjEHygCvD03 mfO7BrhPt7NuTzs9TM+6OSik1xYl3r2Vf5XhvlaCHERgptyT5UWQvRuArZ/y8u/PuKLW FNyrjrhzsRuzc2YZTOR7yX7lZ1I+NrNSOxDX03z+0KZXI9a3OjTHdlPDANnbbzp9g1sw kg== Received: from nasanppmta05.qualcomm.com (i-global254.qualcomm.com [199.106.103.254]) by mx0a-0031df01.pphosted.com (PPS) with ESMTPS id 3uqvyerhqb-1 (version=TLSv1.2 cipher=ECDHE-RSA-AES256-GCM-SHA384 bits=256 verify=NOT); Sat, 02 Dec 2023 12:36:42 +0000 Received: from pps.filterd (NASANPPMTA05.qualcomm.com [127.0.0.1]) by NASANPPMTA05.qualcomm.com (8.17.1.5/8.17.1.5) with ESMTP id 3B2CZ2Rl009437; Sat, 2 Dec 2023 12:36:41 GMT Received: from pps.reinject (localhost [127.0.0.1]) by NASANPPMTA05.qualcomm.com (PPS) with ESMTP id 3uqwnkbday-1; Sat, 02 Dec 2023 12:36:41 +0000 Received: from NASANPPMTA05.qualcomm.com (NASANPPMTA05.qualcomm.com [127.0.0.1]) by pps.reinject (8.17.1.5/8.17.1.5) with ESMTP id 3B2CYMF1008672; Sat, 2 Dec 2023 12:36:41 GMT Received: from stor-dylan.qualcomm.com (stor-dylan.qualcomm.com [192.168.140.207]) by NASANPPMTA05.qualcomm.com (PPS) with ESMTP id 3B2CaevB011393; Sat, 02 Dec 2023 12:36:41 +0000 Received: by stor-dylan.qualcomm.com (Postfix, from userid 359480) id 3894A20A90; Sat, 2 Dec 2023 04:36:40 -0800 (PST) From: Can Guo To: quic_cang@quicinc.com, bvanassche@acm.org, mani@kernel.org, adrian.hunter@intel.com, vkoul@kernel.org, beanhuo@micron.com, avri.altman@wdc.com, junwoo80.lee@samsung.com, martin.petersen@oracle.com Cc: linux-scsi@vger.kernel.org, linux-arm-msm@vger.kernel.org, "Bao D . Nguyen" , Andy Gross , Bjorn Andersson , Konrad Dybcio , "James E.J. Bottomley" , linux-kernel@vger.kernel.org (open list) Subject: [PATCH v8 03/10] scsi: ufs: ufs-qcom: Setup host power mode during init Date: Sat, 2 Dec 2023 04:36:09 -0800 Message-Id: <1701520577-31163-4-git-send-email-quic_cang@quicinc.com> X-Mailer: git-send-email 2.7.4 In-Reply-To: <1701520577-31163-1-git-send-email-quic_cang@quicinc.com> References: <1701520577-31163-1-git-send-email-quic_cang@quicinc.com> X-QCInternal: smtphost X-QCInternal: smtphost X-Proofpoint-Virus-Version: vendor=nai engine=6200 definitions=5800 signatures=585085 X-Proofpoint-Virus-Version: vendor=nai engine=6200 definitions=5800 signatures=585085 X-Proofpoint-ORIG-GUID: YQZt9hEqzivYMlf3Wfo_3125r59Q23pj X-Proofpoint-GUID: YQZt9hEqzivYMlf3Wfo_3125r59Q23pj X-Proofpoint-Virus-Version: vendor=baseguard engine=ICAP:2.0.272,Aquarius:18.0.997,Hydra:6.0.619,FMLib:17.11.176.26 definitions=2023-12-02_10,2023-11-30_01,2023-05-22_02 X-Proofpoint-Spam-Details: rule=outbound_notspam policy=outbound score=0 phishscore=0 impostorscore=0 mlxlogscore=999 bulkscore=0 suspectscore=0 clxscore=1015 spamscore=0 mlxscore=0 malwarescore=0 lowpriorityscore=0 priorityscore=1501 adultscore=0 classifier=spam adjust=0 reason=mlx scancount=1 engine=8.12.0-2311060000 definitions=main-2312020094 Precedence: bulk X-Mailing-List: linux-scsi@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: Setup host power mode and its limitations during UFS host driver init to avoid repetitive work during every power mode change. Acked-by: Andrew Halaney Reviewed-by: Nitin Rawat Reviewed-by: Manivannan Sadhasivam Co-developed-by: Bao D. Nguyen Signed-off-by: Bao D. Nguyen Signed-off-by: Can Guo --- drivers/ufs/host/ufs-qcom.c | 21 ++++++++++++++------- drivers/ufs/host/ufs-qcom.h | 1 + 2 files changed, 15 insertions(+), 7 deletions(-) diff --git a/drivers/ufs/host/ufs-qcom.c b/drivers/ufs/host/ufs-qcom.c index c21ff2c..9a90019 100644 --- a/drivers/ufs/host/ufs-qcom.c +++ b/drivers/ufs/host/ufs-qcom.c @@ -898,7 +898,7 @@ static int ufs_qcom_pwr_change_notify(struct ufs_hba *hba, struct ufs_pa_layer_attr *dev_req_params) { struct ufs_qcom_host *host = ufshcd_get_variant(hba); - struct ufs_host_params host_params; + struct ufs_host_params *host_params = &host->host_params; int ret = 0; if (!dev_req_params) { @@ -908,12 +908,7 @@ static int ufs_qcom_pwr_change_notify(struct ufs_hba *hba, switch (status) { case PRE_CHANGE: - ufshcd_init_host_params(&host_params); - - /* This driver only supports symmetic gear setting i.e., hs_tx_gear == hs_rx_gear */ - host_params.hs_tx_gear = host_params.hs_rx_gear = ufs_qcom_get_hs_gear(hba); - - ret = ufshcd_negotiate_pwr_params(&host_params, dev_max_params, dev_req_params); + ret = ufshcd_negotiate_pwr_params(host_params, dev_max_params, dev_req_params); if (ret) { dev_err(hba->dev, "%s: failed to determine capabilities\n", __func__); @@ -1048,6 +1043,17 @@ static void ufs_qcom_advertise_quirks(struct ufs_hba *hba) hba->quirks |= UFSHCD_QUIRK_REINIT_AFTER_MAX_GEAR_SWITCH; } +static void ufs_qcom_set_host_params(struct ufs_hba *hba) +{ + struct ufs_qcom_host *host = ufshcd_get_variant(hba); + struct ufs_host_params *host_params = &host->host_params; + + ufshcd_init_host_params(host_params); + + /* This driver only supports symmetic gear setting i.e., hs_tx_gear == hs_rx_gear */ + host_params->hs_tx_gear = host_params->hs_rx_gear = ufs_qcom_get_hs_gear(hba); +} + static void ufs_qcom_set_caps(struct ufs_hba *hba) { struct ufs_qcom_host *host = ufshcd_get_variant(hba); @@ -1272,6 +1278,7 @@ static int ufs_qcom_init(struct ufs_hba *hba) ufs_qcom_set_caps(hba); ufs_qcom_advertise_quirks(hba); + ufs_qcom_set_host_params(hba); err = ufs_qcom_ice_init(host); if (err) diff --git a/drivers/ufs/host/ufs-qcom.h b/drivers/ufs/host/ufs-qcom.h index 82cd143..11419eb 100644 --- a/drivers/ufs/host/ufs-qcom.h +++ b/drivers/ufs/host/ufs-qcom.h @@ -238,6 +238,7 @@ struct ufs_qcom_host { struct gpio_desc *device_reset; + struct ufs_host_params host_params; u32 phy_gear; bool esi_enabled; From patchwork Sat Dec 2 12:36:10 2023 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Can Guo X-Patchwork-Id: 13476923 Authentication-Results: smtp.subspace.kernel.org; dkim=pass (2048-bit key) header.d=quicinc.com header.i=@quicinc.com header.b="irWkqJcM" Received: from mx0b-0031df01.pphosted.com (mx0b-0031df01.pphosted.com [205.220.180.131]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 800FA9C; Sat, 2 Dec 2023 04:40:28 -0800 (PST) Received: from pps.filterd (m0279868.ppops.net [127.0.0.1]) by mx0a-0031df01.pphosted.com (8.17.1.19/8.17.1.19) with ESMTP id 3B2CEWoG022474; Sat, 2 Dec 2023 12:36:44 GMT DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=quicinc.com; h=from : to : cc : subject : date : message-id : in-reply-to : references; s=qcppdkim1; bh=W4ch+tubTZYeKnDC5ALhax4ioIC042gEkXsU4YqWJig=; b=irWkqJcMgYCngemhDndf0HTvWhZ11nc6A0D2Fzkc1bue0xwsOESxaYTSjdsc0MfQux8s c0PqxamZPRJ1uX+C4wf9a6vzTNMXy8RO1YXDE9qv8VHq8msQkB4CPa3kuthkdw5FuKTt RuypsoaNSxxedaToQaU/AaV8PqWvzB7v0ANhadRfX7E6qQUyfidKhDb/dyZtooDV1As1 bz2QlaYV/b5ppc9wOSSO2LthVHOPFsyN1XgStCL2vEE0W57IAngVEbljX7lbfPIEUNjX nGZnghSbgCBTlibwXFJL+ZQo52Rhb2toJaDerRwtyrAQsrls6opxnIpH49ARJXdiNY9Q zQ== Received: from nasanppmta05.qualcomm.com (i-global254.qualcomm.com [199.106.103.254]) by mx0a-0031df01.pphosted.com (PPS) with ESMTPS id 3uquwt0ms0-1 (version=TLSv1.2 cipher=ECDHE-RSA-AES256-GCM-SHA384 bits=256 verify=NOT); Sat, 02 Dec 2023 12:36:44 +0000 Received: from pps.filterd (NASANPPMTA05.qualcomm.com [127.0.0.1]) by NASANPPMTA05.qualcomm.com (8.17.1.5/8.17.1.5) with ESMTP id 3B2CagLh011417; Sat, 2 Dec 2023 12:36:42 GMT Received: from pps.reinject (localhost [127.0.0.1]) by NASANPPMTA05.qualcomm.com (PPS) with ESMTP id 3uqwnkbdb6-1; Sat, 02 Dec 2023 12:36:42 +0000 Received: from NASANPPMTA05.qualcomm.com (NASANPPMTA05.qualcomm.com [127.0.0.1]) by pps.reinject (8.17.1.5/8.17.1.5) with ESMTP id 3B2Cag8V011409; Sat, 2 Dec 2023 12:36:42 GMT Received: from stor-dylan.qualcomm.com (stor-dylan.qualcomm.com [192.168.140.207]) by NASANPPMTA05.qualcomm.com (PPS) with ESMTP id 3B2CagLN011408; Sat, 02 Dec 2023 12:36:42 +0000 Received: by stor-dylan.qualcomm.com (Postfix, from userid 359480) id ADD9A20A90; Sat, 2 Dec 2023 04:36:41 -0800 (PST) From: Can Guo To: quic_cang@quicinc.com, bvanassche@acm.org, mani@kernel.org, adrian.hunter@intel.com, vkoul@kernel.org, beanhuo@micron.com, avri.altman@wdc.com, junwoo80.lee@samsung.com, martin.petersen@oracle.com Cc: linux-scsi@vger.kernel.org, linux-arm-msm@vger.kernel.org, Andy Gross , Bjorn Andersson , Konrad Dybcio , "James E.J. Bottomley" , linux-kernel@vger.kernel.org (open list) Subject: [PATCH v8 04/10] scsi: ufs: ufs-qcom: Allow the first init start with the maximum supported gear Date: Sat, 2 Dec 2023 04:36:10 -0800 Message-Id: <1701520577-31163-5-git-send-email-quic_cang@quicinc.com> X-Mailer: git-send-email 2.7.4 In-Reply-To: <1701520577-31163-1-git-send-email-quic_cang@quicinc.com> References: <1701520577-31163-1-git-send-email-quic_cang@quicinc.com> X-QCInternal: smtphost X-QCInternal: smtphost X-Proofpoint-Virus-Version: vendor=nai engine=6200 definitions=5800 signatures=585085 X-Proofpoint-Virus-Version: vendor=nai engine=6200 definitions=5800 signatures=585085 X-Proofpoint-GUID: SNrZdyvFkHz6kdsZ2TT4Qf4Hz4ENz7-t X-Proofpoint-ORIG-GUID: SNrZdyvFkHz6kdsZ2TT4Qf4Hz4ENz7-t X-Proofpoint-Virus-Version: vendor=baseguard engine=ICAP:2.0.272,Aquarius:18.0.997,Hydra:6.0.619,FMLib:17.11.176.26 definitions=2023-12-02_10,2023-11-30_01,2023-05-22_02 X-Proofpoint-Spam-Details: rule=outbound_notspam policy=outbound score=0 suspectscore=0 adultscore=0 clxscore=1015 impostorscore=0 mlxlogscore=999 bulkscore=0 phishscore=0 priorityscore=1501 malwarescore=0 lowpriorityscore=0 spamscore=0 mlxscore=0 classifier=spam adjust=0 reason=mlx scancount=1 engine=8.12.0-2311060000 definitions=main-2312020094 Precedence: bulk X-Mailing-List: linux-scsi@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: During host driver init, the phy_gear is set to the minimum supported gear (HS_G2). Then, during the first power mode change, the negotiated gear, say HS-G4, is updated to the phy_gear variable so that in the second init the updated phy_gear can be used to program the PHY. But the current code only allows update the phy_gear to a higher value. If one wants to start the first init with the maximum support gear, say HS-G4, the phy_gear is not updated to HS-G3 if the device only supports HS-G3. The original check added there is intend to make sure the phy_gear won't be updated when gear is scaled down (during clock scaling). Update the check so that one can start the first init with the maximum support gear without breaking the original fix by checking the ufshcd_state, that is, allow update to phy_gear only if power mode change is invoked from ufshcd_probe_hba(). Reviewed-by: Manivannan Sadhasivam Reviewed-by: Nitin Rawat Signed-off-by: Can Guo --- drivers/ufs/host/ufs-qcom.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) diff --git a/drivers/ufs/host/ufs-qcom.c b/drivers/ufs/host/ufs-qcom.c index 9a90019..81056b9 100644 --- a/drivers/ufs/host/ufs-qcom.c +++ b/drivers/ufs/host/ufs-qcom.c @@ -916,11 +916,12 @@ static int ufs_qcom_pwr_change_notify(struct ufs_hba *hba, } /* - * Update phy_gear only when the gears are scaled to a higher value. This is - * because, the PHY gear settings are backwards compatible and we only need to - * change the PHY gear settings while scaling to higher gears. + * During UFS driver probe, always update the PHY gear to match the negotiated + * gear, so that, if quirk UFSHCD_QUIRK_REINIT_AFTER_MAX_GEAR_SWITCH is enabled, + * the second init can program the optimal PHY settings. This allows one to start + * the first init with either the minimum or the maximum support gear. */ - if (dev_req_params->gear_tx > host->phy_gear) + if (hba->ufshcd_state == UFSHCD_STATE_RESET) host->phy_gear = dev_req_params->gear_tx; /* enable the device ref clock before changing to HS mode */ From patchwork Sat Dec 2 12:36:11 2023 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Can Guo X-Patchwork-Id: 13476922 Authentication-Results: smtp.subspace.kernel.org; dkim=pass (2048-bit key) header.d=quicinc.com header.i=@quicinc.com header.b="cnsDeVlf" Received: from mx0a-0031df01.pphosted.com (mx0a-0031df01.pphosted.com [205.220.168.131]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id EBCAD12E; Sat, 2 Dec 2023 04:39:10 -0800 (PST) Received: from pps.filterd (m0279866.ppops.net [127.0.0.1]) by mx0a-0031df01.pphosted.com (8.17.1.19/8.17.1.19) with ESMTP id 3B2C44xR028555; Sat, 2 Dec 2023 12:36:45 GMT DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=quicinc.com; h=from : to : cc : subject : date : message-id : in-reply-to : references; s=qcppdkim1; bh=OyKiuUDodWiYtj2DgO5yfQd7glArFtEh/Ov8j266V3Y=; b=cnsDeVlf0usoWBgBGOi6ja0PTESs2lxJI6HHcRbSoK0iCoz49XDGDnNdg7HkgrhGgTn+ c7fHO8imEFoN4QqJt3bJUhD/G7KxaH0xDBXSK97iJjs4QWhh3J0iT5GJrulorcc5sdqK Zwy0ys/G440d6c7dY+OB5xSP1lKEEKCkBoddl3a1r0tccKjtnlZicOMDPaD6PoojtLp1 7MS4JWTvbmw5g3F/0xkBF+4Zf5+0jrXmF+x698wcMWTLGCeUTnYiKJbJJJEtiynAefpd sJz7s5LybaWlPWXd0/IHsg8ssfjNyuht6aSnKRRvNF8RiuMuyhq2t4ad2HEiA3Cz2pWP ww== Received: from nasanppmta01.qualcomm.com (i-global254.qualcomm.com [199.106.103.254]) by mx0a-0031df01.pphosted.com (PPS) with ESMTPS id 3uqwvhgf7f-1 (version=TLSv1.2 cipher=ECDHE-RSA-AES256-GCM-SHA384 bits=256 verify=NOT); Sat, 02 Dec 2023 12:36:45 +0000 Received: from pps.filterd (NASANPPMTA01.qualcomm.com [127.0.0.1]) by NASANPPMTA01.qualcomm.com (8.17.1.5/8.17.1.5) with ESMTP id 3B2CUqIL015985; Sat, 2 Dec 2023 12:36:44 GMT Received: from pps.reinject (localhost [127.0.0.1]) by NASANPPMTA01.qualcomm.com (PPS) with ESMTP id 3uqwnkbdu1-1; Sat, 02 Dec 2023 12:36:44 +0000 Received: from NASANPPMTA01.qualcomm.com (NASANPPMTA01.qualcomm.com [127.0.0.1]) by pps.reinject (8.17.1.5/8.17.1.5) with ESMTP id 3B2Cailw022185; Sat, 2 Dec 2023 12:36:44 GMT Received: from stor-dylan.qualcomm.com (stor-dylan.qualcomm.com [192.168.140.207]) by NASANPPMTA01.qualcomm.com (PPS) with ESMTP id 3B2Cah6q022182; Sat, 02 Dec 2023 12:36:43 +0000 Received: by stor-dylan.qualcomm.com (Postfix, from userid 359480) id 19D2B20A90; Sat, 2 Dec 2023 04:36:43 -0800 (PST) From: Can Guo To: quic_cang@quicinc.com, bvanassche@acm.org, mani@kernel.org, adrian.hunter@intel.com, vkoul@kernel.org, beanhuo@micron.com, avri.altman@wdc.com, junwoo80.lee@samsung.com, martin.petersen@oracle.com Cc: linux-scsi@vger.kernel.org, linux-arm-msm@vger.kernel.org, Andy Gross , Bjorn Andersson , Konrad Dybcio , "James E.J. Bottomley" , linux-kernel@vger.kernel.org (open list) Subject: [PATCH v8 05/10] scsi: ufs: ufs-qcom: Limit HS-G5 Rate-A to hosts with HW version 5 Date: Sat, 2 Dec 2023 04:36:11 -0800 Message-Id: <1701520577-31163-6-git-send-email-quic_cang@quicinc.com> X-Mailer: git-send-email 2.7.4 In-Reply-To: <1701520577-31163-1-git-send-email-quic_cang@quicinc.com> References: <1701520577-31163-1-git-send-email-quic_cang@quicinc.com> X-QCInternal: smtphost X-QCInternal: smtphost X-Proofpoint-Virus-Version: vendor=nai engine=6200 definitions=5800 signatures=585085 X-Proofpoint-Virus-Version: vendor=nai engine=6200 definitions=5800 signatures=585085 X-Proofpoint-GUID: 0fN7CsQ1X0NmIqY4MvfKp_lqnd1-pqjx X-Proofpoint-ORIG-GUID: 0fN7CsQ1X0NmIqY4MvfKp_lqnd1-pqjx X-Proofpoint-Virus-Version: vendor=baseguard engine=ICAP:2.0.272,Aquarius:18.0.997,Hydra:6.0.619,FMLib:17.11.176.26 definitions=2023-12-02_10,2023-11-30_01,2023-05-22_02 X-Proofpoint-Spam-Details: rule=outbound_notspam policy=outbound score=0 bulkscore=0 spamscore=0 adultscore=0 malwarescore=0 impostorscore=0 lowpriorityscore=0 phishscore=0 clxscore=1015 mlxscore=0 suspectscore=0 priorityscore=1501 mlxlogscore=798 classifier=spam adjust=0 reason=mlx scancount=1 engine=8.12.0-2311060000 definitions=main-2312020094 Precedence: bulk X-Mailing-List: linux-scsi@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: Qcom UFS hosts, with HW ver 5, can only support up to HS-G5 Rate-A due to HW limitations. If the HS-G5 PHY gear is used, update host_params->hs_rate to Rate-A, so that the subsequent power mode changes shall stick to Rate-A. Reviewed-by: Nitin Rawat Reviewed-by: Manivannan Sadhasivam Signed-off-by: Can Guo --- drivers/ufs/host/ufs-qcom.c | 18 +++++++++++++++++- 1 file changed, 17 insertions(+), 1 deletion(-) diff --git a/drivers/ufs/host/ufs-qcom.c b/drivers/ufs/host/ufs-qcom.c index 81056b9..aca6199 100644 --- a/drivers/ufs/host/ufs-qcom.c +++ b/drivers/ufs/host/ufs-qcom.c @@ -442,9 +442,25 @@ static u32 ufs_qcom_get_hs_gear(struct ufs_hba *hba) static int ufs_qcom_power_up_sequence(struct ufs_hba *hba) { struct ufs_qcom_host *host = ufshcd_get_variant(hba); + struct ufs_host_params *host_params = &host->host_params; struct phy *phy = host->generic_phy; + enum phy_mode mode; int ret; + /* + * HW ver 5 can only support up to HS-G5 Rate-A due to HW limitations. + * If the HS-G5 PHY gear is used, update host_params->hs_rate to Rate-A, + * so that the subsequent power mode change shall stick to Rate-A. + */ + if (host->hw_ver.major == 0x5) { + if (host->phy_gear == UFS_HS_G5) + host_params->hs_rate = PA_HS_MODE_A; + else + host_params->hs_rate = PA_HS_MODE_B; + } + + mode = host_params->hs_rate == PA_HS_MODE_B ? PHY_MODE_UFS_HS_B : PHY_MODE_UFS_HS_A; + /* Reset UFS Host Controller and PHY */ ret = ufs_qcom_host_reset(hba); if (ret) @@ -459,7 +475,7 @@ static int ufs_qcom_power_up_sequence(struct ufs_hba *hba) return ret; } - phy_set_mode_ext(phy, PHY_MODE_UFS_HS_B, host->phy_gear); + phy_set_mode_ext(phy, mode, host->phy_gear); /* power on phy - start serdes and phy's power and clocks */ ret = phy_power_on(phy); From patchwork Sat Dec 2 12:36:12 2023 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Can Guo X-Patchwork-Id: 13476921 Authentication-Results: smtp.subspace.kernel.org; dkim=pass (2048-bit key) header.d=quicinc.com header.i=@quicinc.com header.b="oiQ+5OhU" Received: from mx0a-0031df01.pphosted.com (mx0a-0031df01.pphosted.com [205.220.168.131]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id CB0D5134; Sat, 2 Dec 2023 04:38:33 -0800 (PST) Received: from pps.filterd (m0279863.ppops.net [127.0.0.1]) by mx0a-0031df01.pphosted.com (8.17.1.19/8.17.1.19) with ESMTP id 3B2CZ8Aa006938; Sat, 2 Dec 2023 12:36:46 GMT DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=quicinc.com; h=from : to : cc : subject : date : message-id : in-reply-to : references; s=qcppdkim1; bh=8lNJtIxq4QyUwpN4j9OKeu7nOMsXjWl2NhGsEwxko3w=; b=oiQ+5OhUkqbhWK10pHnEzITg7O6Iy35ioGLKcvRRRj75knZrO+T3GBTh0D5YHtwy36O6 s9f6hD74+kiMgYPt3t2JJ1ZAQiclyUuOoXrH0YRzt5VVF4qKuRs6bQQRWteXWv2hLUBV fQqv9VviLpJ43xg6VmCjTvJIHF6voimwfqW8MeP6erlfev98vxlH65jicIDjWPs12zv1 y+uZF9yAOPmu/qOBzvVjzgTZUqIKhRunMxCiXZ1Qk/aKYhW/6hQWA6IFhus0HJWgb4ei 7Z1ARARFrGrSDJXg9GXiQhVkJPw35TIHn3WjTIZu1hCHily0pf76p61H4f8y6lE9CFte xw== Received: from nasanppmta02.qualcomm.com (i-global254.qualcomm.com [199.106.103.254]) by mx0a-0031df01.pphosted.com (PPS) with ESMTPS id 3uqvt8ghre-1 (version=TLSv1.2 cipher=ECDHE-RSA-AES256-GCM-SHA384 bits=256 verify=NOT); Sat, 02 Dec 2023 12:36:46 +0000 Received: from pps.filterd (NASANPPMTA02.qualcomm.com [127.0.0.1]) by NASANPPMTA02.qualcomm.com (8.17.1.5/8.17.1.5) with ESMTP id 3B2Cacih018650; Sat, 2 Dec 2023 12:36:45 GMT Received: from pps.reinject (localhost [127.0.0.1]) by NASANPPMTA02.qualcomm.com (PPS) with ESMTP id 3uqwnkka8k-1; Sat, 02 Dec 2023 12:36:45 +0000 Received: from NASANPPMTA02.qualcomm.com (NASANPPMTA02.qualcomm.com [127.0.0.1]) by pps.reinject (8.17.1.5/8.17.1.5) with ESMTP id 3B2Ca65f017832; Sat, 2 Dec 2023 12:36:45 GMT Received: from stor-dylan.qualcomm.com (stor-dylan.qualcomm.com [192.168.140.207]) by NASANPPMTA02.qualcomm.com (PPS) with ESMTP id 3B2Caj3I018698; Sat, 02 Dec 2023 12:36:45 +0000 Received: by stor-dylan.qualcomm.com (Postfix, from userid 359480) id 7DBC120A90; Sat, 2 Dec 2023 04:36:44 -0800 (PST) From: Can Guo To: quic_cang@quicinc.com, bvanassche@acm.org, mani@kernel.org, adrian.hunter@intel.com, vkoul@kernel.org, beanhuo@micron.com, avri.altman@wdc.com, junwoo80.lee@samsung.com, martin.petersen@oracle.com Cc: linux-scsi@vger.kernel.org, linux-arm-msm@vger.kernel.org, Andy Gross , Bjorn Andersson , Konrad Dybcio , "James E.J. Bottomley" , linux-kernel@vger.kernel.org (open list) Subject: [PATCH v8 06/10] scsi: ufs: ufs-qcom: Set initial PHY gear to max HS gear for HW ver 4 and newer Date: Sat, 2 Dec 2023 04:36:12 -0800 Message-Id: <1701520577-31163-7-git-send-email-quic_cang@quicinc.com> X-Mailer: git-send-email 2.7.4 In-Reply-To: <1701520577-31163-1-git-send-email-quic_cang@quicinc.com> References: <1701520577-31163-1-git-send-email-quic_cang@quicinc.com> X-QCInternal: smtphost X-QCInternal: smtphost X-Proofpoint-Virus-Version: vendor=nai engine=6200 definitions=5800 signatures=585085 X-Proofpoint-Virus-Version: vendor=nai engine=6200 definitions=5800 signatures=585085 X-Proofpoint-GUID: Vfglb2iOMeGbrIWYAQGBBep_frh-H9Fv X-Proofpoint-ORIG-GUID: Vfglb2iOMeGbrIWYAQGBBep_frh-H9Fv X-Proofpoint-Virus-Version: vendor=baseguard engine=ICAP:2.0.272,Aquarius:18.0.997,Hydra:6.0.619,FMLib:17.11.176.26 definitions=2023-12-02_10,2023-11-30_01,2023-05-22_02 X-Proofpoint-Spam-Details: rule=outbound_notspam policy=outbound score=0 malwarescore=0 priorityscore=1501 mlxlogscore=999 phishscore=0 spamscore=0 bulkscore=0 adultscore=0 impostorscore=0 suspectscore=0 lowpriorityscore=0 clxscore=1015 mlxscore=0 classifier=spam adjust=0 reason=mlx scancount=1 engine=8.12.0-2311060000 definitions=main-2312020094 Precedence: bulk X-Mailing-List: linux-scsi@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: Since HW ver 4, max HS gear can be get from UFS host controller's register, use the max HS gear as the initial PHY gear instead of UFS_HS_G2, so that we don't need to update the hard code for newer targets in future. Reviewed-by: Nitin Rawat Reviewed-by: Manivannan Sadhasivam Signed-off-by: Can Guo --- drivers/ufs/host/ufs-qcom.c | 23 +++++++++++++++++------ 1 file changed, 17 insertions(+), 6 deletions(-) diff --git a/drivers/ufs/host/ufs-qcom.c b/drivers/ufs/host/ufs-qcom.c index aca6199..543939c 100644 --- a/drivers/ufs/host/ufs-qcom.c +++ b/drivers/ufs/host/ufs-qcom.c @@ -1060,6 +1060,22 @@ static void ufs_qcom_advertise_quirks(struct ufs_hba *hba) hba->quirks |= UFSHCD_QUIRK_REINIT_AFTER_MAX_GEAR_SWITCH; } +static void ufs_qcom_set_phy_gear(struct ufs_qcom_host *host) +{ + struct ufs_host_params *host_params = &host->host_params; + + host->phy_gear = host_params->hs_tx_gear; + + /* + * For controllers whose major HW version is < 4, power up the PHY using + * minimum supported gear (UFS_HS_G2). Switching to max gear will be + * performed during reinit if supported. For newer controllers, whose + * major HW version is >= 4, power up the PHY using max supported gear. + */ + if (host->hw_ver.major < 0x4) + host->phy_gear = UFS_HS_G2; +} + static void ufs_qcom_set_host_params(struct ufs_hba *hba) { struct ufs_qcom_host *host = ufshcd_get_variant(hba); @@ -1296,6 +1312,7 @@ static int ufs_qcom_init(struct ufs_hba *hba) ufs_qcom_set_caps(hba); ufs_qcom_advertise_quirks(hba); ufs_qcom_set_host_params(hba); + ufs_qcom_set_phy_gear(host); err = ufs_qcom_ice_init(host); if (err) @@ -1313,12 +1330,6 @@ static int ufs_qcom_init(struct ufs_hba *hba) dev_warn(dev, "%s: failed to configure the testbus %d\n", __func__, err); - /* - * Power up the PHY using the minimum supported gear (UFS_HS_G2). - * Switching to max gear will be performed during reinit if supported. - */ - host->phy_gear = UFS_HS_G2; - return 0; out_variant_clear: From patchwork Sat Dec 2 12:36:13 2023 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Can Guo X-Patchwork-Id: 13476915 Authentication-Results: smtp.subspace.kernel.org; dkim=pass (2048-bit key) header.d=quicinc.com header.i=@quicinc.com header.b="n7V1i6y3" Received: from mx0a-0031df01.pphosted.com (mx0a-0031df01.pphosted.com [205.220.168.131]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 168C3134; Sat, 2 Dec 2023 04:37:01 -0800 (PST) Received: from pps.filterd (m0279866.ppops.net [127.0.0.1]) by mx0a-0031df01.pphosted.com (8.17.1.19/8.17.1.19) with ESMTP id 3B2CU7dK018960; Sat, 2 Dec 2023 12:36:48 GMT DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=quicinc.com; h=from : to : cc : subject : date : message-id : in-reply-to : references; s=qcppdkim1; bh=klbEx+jsgDfMuqP0VbnPr76NxVt0J0p+zZTspCvHoV8=; b=n7V1i6y3ydfzVJ1I78KgtfVDc7qyiTLfquAGeK2zHG3J7OukAcE5EfTenPzpBoUlibBX CG0+yjd1g+f0xUXbWQQ+zBJSEso2RTYhULdSAsNdxwfUNFgCQBP3MeVv1GtvSgxhBtf0 ySPmbbYV0N5VZk2dM5XsS2mM13ysOdnC6AqWJ5NzGlvLFVm3344eYtmNTecsqjOzq2to abXjuNb4XV04sLGVqBMNe8Y7MjqDwVmg9EDsPDefhk/HMPwxE+RZVY1J7pAZMNACRPQk VfzQV7tYlbeMikJ0n5+6GQ7H9zdTqkFMqgcQhEZr7EngIfa4dBxnet9y6nmgs7DvgxWK FA== Received: from nasanppmta02.qualcomm.com (i-global254.qualcomm.com [199.106.103.254]) by mx0a-0031df01.pphosted.com (PPS) with ESMTPS id 3uqwvhgf7g-1 (version=TLSv1.2 cipher=ECDHE-RSA-AES256-GCM-SHA384 bits=256 verify=NOT); Sat, 02 Dec 2023 12:36:47 +0000 Received: from pps.filterd (NASANPPMTA02.qualcomm.com [127.0.0.1]) by NASANPPMTA02.qualcomm.com (8.17.1.5/8.17.1.5) with ESMTP id 3B2CalwI018720; Sat, 2 Dec 2023 12:36:47 GMT Received: from pps.reinject (localhost [127.0.0.1]) by NASANPPMTA02.qualcomm.com (PPS) with ESMTP id 3uqwnkka8r-1; Sat, 02 Dec 2023 12:36:47 +0000 Received: from NASANPPMTA02.qualcomm.com (NASANPPMTA02.qualcomm.com [127.0.0.1]) by pps.reinject (8.17.1.5/8.17.1.5) with ESMTP id 3B2Ca65h017832; Sat, 2 Dec 2023 12:36:46 GMT Received: from stor-dylan.qualcomm.com (stor-dylan.qualcomm.com [192.168.140.207]) by NASANPPMTA02.qualcomm.com (PPS) with ESMTP id 3B2CakPO018712; Sat, 02 Dec 2023 12:36:46 +0000 Received: by stor-dylan.qualcomm.com (Postfix, from userid 359480) id 1843120A90; Sat, 2 Dec 2023 04:36:46 -0800 (PST) From: Can Guo To: quic_cang@quicinc.com, bvanassche@acm.org, mani@kernel.org, adrian.hunter@intel.com, vkoul@kernel.org, beanhuo@micron.com, avri.altman@wdc.com, junwoo80.lee@samsung.com, martin.petersen@oracle.com Cc: linux-scsi@vger.kernel.org, linux-arm-msm@vger.kernel.org, Andy Gross , Bjorn Andersson , Konrad Dybcio , "James E.J. Bottomley" , linux-kernel@vger.kernel.org (open list) Subject: [PATCH v8 07/10] scsi: ufs: ufs-qcom: Check return value of phy_set_mode_ext() Date: Sat, 2 Dec 2023 04:36:13 -0800 Message-Id: <1701520577-31163-8-git-send-email-quic_cang@quicinc.com> X-Mailer: git-send-email 2.7.4 In-Reply-To: <1701520577-31163-1-git-send-email-quic_cang@quicinc.com> References: <1701520577-31163-1-git-send-email-quic_cang@quicinc.com> X-QCInternal: smtphost X-QCInternal: smtphost X-Proofpoint-Virus-Version: vendor=nai engine=6200 definitions=5800 signatures=585085 X-Proofpoint-Virus-Version: vendor=nai engine=6200 definitions=5800 signatures=585085 X-Proofpoint-GUID: yQOsdvsswcu9mtVpAmVnw2daW2vl4wq7 X-Proofpoint-ORIG-GUID: yQOsdvsswcu9mtVpAmVnw2daW2vl4wq7 X-Proofpoint-Virus-Version: vendor=baseguard engine=ICAP:2.0.272,Aquarius:18.0.997,Hydra:6.0.619,FMLib:17.11.176.26 definitions=2023-12-02_10,2023-11-30_01,2023-05-22_02 X-Proofpoint-Spam-Details: rule=outbound_notspam policy=outbound score=0 bulkscore=0 spamscore=0 adultscore=0 malwarescore=0 impostorscore=0 lowpriorityscore=0 phishscore=0 clxscore=1015 mlxscore=0 suspectscore=0 priorityscore=1501 mlxlogscore=999 classifier=spam adjust=0 reason=mlx scancount=1 engine=8.12.0-2311060000 definitions=main-2312020094 Precedence: bulk X-Mailing-List: linux-scsi@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: In ufs_qcom_power_up_sequence(), check return value of phy_set_mode_ext() and stop proceeding if phy_set_mode_ext() fails. Reviewed-by: Nitin Rawat Reviewed-by: Manivannan Sadhasivam Signed-off-by: Can Guo --- drivers/ufs/host/ufs-qcom.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/ufs/host/ufs-qcom.c b/drivers/ufs/host/ufs-qcom.c index 543939c..ee3f07a 100644 --- a/drivers/ufs/host/ufs-qcom.c +++ b/drivers/ufs/host/ufs-qcom.c @@ -475,7 +475,9 @@ static int ufs_qcom_power_up_sequence(struct ufs_hba *hba) return ret; } - phy_set_mode_ext(phy, mode, host->phy_gear); + ret = phy_set_mode_ext(phy, mode, host->phy_gear); + if (ret) + goto out_disable_phy; /* power on phy - start serdes and phy's power and clocks */ ret = phy_power_on(phy); From patchwork Sat Dec 2 12:36:14 2023 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Can Guo X-Patchwork-Id: 13476917 Authentication-Results: smtp.subspace.kernel.org; dkim=pass (2048-bit key) header.d=quicinc.com header.i=@quicinc.com header.b="QFr8If8x" Received: from mx0b-0031df01.pphosted.com (mx0b-0031df01.pphosted.com [205.220.180.131]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id A1BCE12E; Sat, 2 Dec 2023 04:37:04 -0800 (PST) Received: from pps.filterd (m0279871.ppops.net [127.0.0.1]) by mx0a-0031df01.pphosted.com (8.17.1.19/8.17.1.19) with ESMTP id 3B2CaKJt011426; Sat, 2 Dec 2023 12:36:50 GMT DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=quicinc.com; h=from : to : cc : subject : date : message-id : in-reply-to : references; s=qcppdkim1; bh=F774Y4Y23EcVWPLBnqfuc9pSgJl+CqV1EpBPBNmV9o8=; b=QFr8If8x2zuqekvVeaW5I4OzVuNrZGCrfKB1bpLe9maAOO2G54Pq7bo2VN9dUrixJuq5 rWgMropfvva80vgEgk6w1HaUV4QPzMRg+fu6Q2AqVOLI+LgKibe0rseySDnBF0tQpQ+C 8IFCDykPbUvIOi8s8RZooFvlgzqFtjdoqwnYiExH7DRtjuAA29O0eOCzkON4OOsw/zX9 vbF9rZeg/CrSh9oQrmFJxs7RUtKPyPwd8us8sjru/69zyro7dpJXno/ZeeIcfqSclRR9 r8SiGIQQ1NWE1kc+coEN2yEYhw9knTU41i+0pxjBMhxwpFzigHK5aADgIMrkZEfAPSz9 8w== Received: from nasanppmta03.qualcomm.com (i-global254.qualcomm.com [199.106.103.254]) by mx0a-0031df01.pphosted.com (PPS) with ESMTPS id 3uqv670kq9-1 (version=TLSv1.2 cipher=ECDHE-RSA-AES256-GCM-SHA384 bits=256 verify=NOT); Sat, 02 Dec 2023 12:36:50 +0000 Received: from pps.filterd (NASANPPMTA03.qualcomm.com [127.0.0.1]) by NASANPPMTA03.qualcomm.com (8.17.1.5/8.17.1.5) with ESMTP id 3B2Ca9aD017632; Sat, 2 Dec 2023 12:36:48 GMT Received: from pps.reinject (localhost [127.0.0.1]) by NASANPPMTA03.qualcomm.com (PPS) with ESMTP id 3uqwnkb9r4-1; Sat, 02 Dec 2023 12:36:48 +0000 Received: from NASANPPMTA03.qualcomm.com (NASANPPMTA03.qualcomm.com [127.0.0.1]) by pps.reinject (8.17.1.5/8.17.1.5) with ESMTP id 3B2CaOWr017893; Sat, 2 Dec 2023 12:36:48 GMT Received: from stor-dylan.qualcomm.com (stor-dylan.qualcomm.com [192.168.140.207]) by NASANPPMTA03.qualcomm.com (PPS) with ESMTP id 3B2CamRj018473; Sat, 02 Dec 2023 12:36:48 +0000 Received: by stor-dylan.qualcomm.com (Postfix, from userid 359480) id BD53220A90; Sat, 2 Dec 2023 04:36:47 -0800 (PST) From: Can Guo To: quic_cang@quicinc.com, bvanassche@acm.org, mani@kernel.org, adrian.hunter@intel.com, vkoul@kernel.org, beanhuo@micron.com, avri.altman@wdc.com, junwoo80.lee@samsung.com, martin.petersen@oracle.com Cc: linux-scsi@vger.kernel.org, linux-arm-msm@vger.kernel.org, "Bao D. Nguyen" , Andy Gross , Bjorn Andersson , Konrad Dybcio , "James E.J. Bottomley" , linux-kernel@vger.kernel.org (open list) Subject: [PATCH v8 08/10] scsi: ufs: ufs-qcom: Add support for UFS device version detection Date: Sat, 2 Dec 2023 04:36:14 -0800 Message-Id: <1701520577-31163-9-git-send-email-quic_cang@quicinc.com> X-Mailer: git-send-email 2.7.4 In-Reply-To: <1701520577-31163-1-git-send-email-quic_cang@quicinc.com> References: <1701520577-31163-1-git-send-email-quic_cang@quicinc.com> X-QCInternal: smtphost X-QCInternal: smtphost X-Proofpoint-Virus-Version: vendor=nai engine=6200 definitions=5800 signatures=585085 X-Proofpoint-Virus-Version: vendor=nai engine=6200 definitions=5800 signatures=585085 X-Proofpoint-ORIG-GUID: o2OiUqPnmYrkKGxj3-NcqAA5c8YVm_YY X-Proofpoint-GUID: o2OiUqPnmYrkKGxj3-NcqAA5c8YVm_YY X-Proofpoint-Virus-Version: vendor=baseguard engine=ICAP:2.0.272,Aquarius:18.0.997,Hydra:6.0.619,FMLib:17.11.176.26 definitions=2023-12-02_09,2023-11-30_01,2023-05-22_02 X-Proofpoint-Spam-Details: rule=outbound_notspam policy=outbound score=0 impostorscore=0 lowpriorityscore=0 priorityscore=1501 malwarescore=0 bulkscore=0 clxscore=1015 mlxscore=0 spamscore=0 suspectscore=0 adultscore=0 mlxlogscore=999 phishscore=0 classifier=spam adjust=0 reason=mlx scancount=1 engine=8.12.0-2311060000 definitions=main-2312020094 Precedence: bulk X-Mailing-List: linux-scsi@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: From: "Bao D. Nguyen" Start from HW ver 5, a spare register in UFS host controller is added and used to indicate the UFS device version. The spare register is populated by bootloader for now, but in future it will be populated by HW automatically during link startup with its best efforts in any boot stage prior to Linux. During host driver init, read the spare register, if it is not populated with a UFS device version, go ahead with the dual init mechanism. If a UFS device version is in there, use the UFS device version together with host controller's HW version to decide the proper PHY gear which should be used to configure the UFS PHY without going through the second init. Signed-off-by: Bao D. Nguyen Signed-off-by: Can Guo Reviewed-by: Manivannan Sadhasivam Reviewed-by: Nitin Rawat --- v7 -> v8: Fixed a BUG introduced from v6 -> v7. The spare register is added since HW ver 5, hence exclude HW ver == 4. --- drivers/ufs/host/ufs-qcom.c | 35 ++++++++++++++++++++++++++++------- drivers/ufs/host/ufs-qcom.h | 4 ++++ 2 files changed, 32 insertions(+), 7 deletions(-) diff --git a/drivers/ufs/host/ufs-qcom.c b/drivers/ufs/host/ufs-qcom.c index ee3f07a..968a4c0 100644 --- a/drivers/ufs/host/ufs-qcom.c +++ b/drivers/ufs/host/ufs-qcom.c @@ -1065,17 +1065,38 @@ static void ufs_qcom_advertise_quirks(struct ufs_hba *hba) static void ufs_qcom_set_phy_gear(struct ufs_qcom_host *host) { struct ufs_host_params *host_params = &host->host_params; + u32 val, dev_major; host->phy_gear = host_params->hs_tx_gear; - /* - * For controllers whose major HW version is < 4, power up the PHY using - * minimum supported gear (UFS_HS_G2). Switching to max gear will be - * performed during reinit if supported. For newer controllers, whose - * major HW version is >= 4, power up the PHY using max supported gear. - */ - if (host->hw_ver.major < 0x4) + if (host->hw_ver.major < 0x4) { + /* + * For controllers whose major HW version is < 4, power up the + * PHY using minimum supported gear (UFS_HS_G2). Switching to + * max gear will be performed during reinit if supported. + * For newer controllers, whose major HW version is >= 4, power + * up the PHY using max supported gear. + */ host->phy_gear = UFS_HS_G2; + } else if (host->hw_ver.major >= 0x5) { + val = ufshcd_readl(host->hba, REG_UFS_DEBUG_SPARE_CFG); + dev_major = FIELD_GET(UFS_DEV_VER_MAJOR_MASK, val); + + /* + * Since the UFS device version is populated, let's remove the + * REINIT quirk as the negotiated gear won't change during boot. + * So there is no need to do reinit. + */ + if (dev_major != 0x0) + host->hba->quirks &= ~UFSHCD_QUIRK_REINIT_AFTER_MAX_GEAR_SWITCH; + + /* + * For UFS 3.1 device and older, power up the PHY using HS-G4 + * PHY gear to save power. + */ + if (dev_major > 0x0 && dev_major < 0x4) + host->phy_gear = UFS_HS_G4; + } } static void ufs_qcom_set_host_params(struct ufs_hba *hba) diff --git a/drivers/ufs/host/ufs-qcom.h b/drivers/ufs/host/ufs-qcom.h index 11419eb..32e51d9 100644 --- a/drivers/ufs/host/ufs-qcom.h +++ b/drivers/ufs/host/ufs-qcom.h @@ -23,6 +23,8 @@ #define UFS_HW_VER_MINOR_MASK GENMASK(27, 16) #define UFS_HW_VER_STEP_MASK GENMASK(15, 0) +#define UFS_DEV_VER_MAJOR_MASK GENMASK(7, 4) + /* vendor specific pre-defined parameters */ #define SLOW 1 #define FAST 2 @@ -54,6 +56,8 @@ enum { UFS_AH8_CFG = 0xFC, REG_UFS_CFG3 = 0x271C, + + REG_UFS_DEBUG_SPARE_CFG = 0x284C, }; /* QCOM UFS host controller vendor specific debug registers */ From patchwork Sat Dec 2 12:36:15 2023 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Can Guo X-Patchwork-Id: 13476918 Authentication-Results: smtp.subspace.kernel.org; dkim=pass (2048-bit key) header.d=quicinc.com header.i=@quicinc.com header.b="SdJdzYjJ" Received: from mx0b-0031df01.pphosted.com (mx0b-0031df01.pphosted.com [205.220.180.131]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 02F9318C; Sat, 2 Dec 2023 04:37:05 -0800 (PST) Received: from pps.filterd (m0279872.ppops.net [127.0.0.1]) by mx0a-0031df01.pphosted.com (8.17.1.19/8.17.1.19) with ESMTP id 3B2CaOl2026002; Sat, 2 Dec 2023 12:36:52 GMT DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=quicinc.com; h=from : to : cc : subject : date : message-id : in-reply-to : references; s=qcppdkim1; bh=5Oh0PL/lcPtBT82P0nr2cMa3kSGu7EMhX1ovjYwLea8=; b=SdJdzYjJLKBCbWsiMFblEhZ3HPYAFuDuz6G4G+cph8o1dGYwgGndXmz0UsRhmtN0jiOq 4u8fnjw6JR5ivBpf6Igle3bRPDOJ6n4T2i+fGx0UnBOxvJjm/fAmhsOomQ5bKtyc6+05 e3pAek19M4GYe/oCGM6VJRcf0Wte9Duhh8riQAOLKVrz4W47R2Ftanv91kzbHxpKmLkB y63Keq5kVw3n0iBp8QkL9ObfIaF07mtH1IQR1Zko27NvWg7B5mPBpk/HH1OQgPGSRh3L qgFh/UqmPxjjf48o6PVnvS8X00lvNr2CRW/GLO2oLmLkaHSAtcH4+fJSXBlv5XA0YHH9 RQ== Received: from nasanppmta01.qualcomm.com (i-global254.qualcomm.com [199.106.103.254]) by mx0a-0031df01.pphosted.com (PPS) with ESMTPS id 3uqvyerhqg-1 (version=TLSv1.2 cipher=ECDHE-RSA-AES256-GCM-SHA384 bits=256 verify=NOT); Sat, 02 Dec 2023 12:36:52 +0000 Received: from pps.filterd (NASANPPMTA01.qualcomm.com [127.0.0.1]) by NASANPPMTA01.qualcomm.com (8.17.1.5/8.17.1.5) with ESMTP id 3B2Cap68022237; Sat, 2 Dec 2023 12:36:51 GMT Received: from pps.reinject (localhost [127.0.0.1]) by NASANPPMTA01.qualcomm.com (PPS) with ESMTP id 3uqwnkbduq-1; Sat, 02 Dec 2023 12:36:51 +0000 Received: from NASANPPMTA01.qualcomm.com (NASANPPMTA01.qualcomm.com [127.0.0.1]) by pps.reinject (8.17.1.5/8.17.1.5) with ESMTP id 3B2CaooS022232; Sat, 2 Dec 2023 12:36:50 GMT Received: from stor-dylan.qualcomm.com (stor-dylan.qualcomm.com [192.168.140.207]) by NASANPPMTA01.qualcomm.com (PPS) with ESMTP id 3B2Caona022230; Sat, 02 Dec 2023 12:36:50 +0000 Received: by stor-dylan.qualcomm.com (Postfix, from userid 359480) id E64B620A90; Sat, 2 Dec 2023 04:36:49 -0800 (PST) From: Can Guo To: quic_cang@quicinc.com, bvanassche@acm.org, mani@kernel.org, adrian.hunter@intel.com, vkoul@kernel.org, beanhuo@micron.com, avri.altman@wdc.com, junwoo80.lee@samsung.com, martin.petersen@oracle.com Cc: linux-scsi@vger.kernel.org, linux-arm-msm@vger.kernel.org, Andy Gross , Bjorn Andersson , Konrad Dybcio , Kishon Vijay Abraham I , Dmitry Baryshkov , Abel Vesa , Johan Hovold , linux-phy@lists.infradead.org (open list:GENERIC PHY FRAMEWORK), linux-kernel@vger.kernel.org (open list) Subject: [PATCH v8 09/10] phy: qualcomm: phy-qcom-qmp-ufs: Rectify SM8550 UFS HS-G4 PHY Settings Date: Sat, 2 Dec 2023 04:36:15 -0800 Message-Id: <1701520577-31163-10-git-send-email-quic_cang@quicinc.com> X-Mailer: git-send-email 2.7.4 In-Reply-To: <1701520577-31163-1-git-send-email-quic_cang@quicinc.com> References: <1701520577-31163-1-git-send-email-quic_cang@quicinc.com> X-QCInternal: smtphost X-QCInternal: smtphost X-Proofpoint-Virus-Version: vendor=nai engine=6200 definitions=5800 signatures=585085 X-Proofpoint-Virus-Version: vendor=nai engine=6200 definitions=5800 signatures=585085 X-Proofpoint-ORIG-GUID: EkxjziLrgRbOncGVNIfi1mN6POPwPGhO X-Proofpoint-GUID: EkxjziLrgRbOncGVNIfi1mN6POPwPGhO X-Proofpoint-Virus-Version: vendor=baseguard engine=ICAP:2.0.272,Aquarius:18.0.997,Hydra:6.0.619,FMLib:17.11.176.26 definitions=2023-12-02_10,2023-11-30_01,2023-05-22_02 X-Proofpoint-Spam-Details: rule=outbound_notspam policy=outbound score=0 phishscore=0 impostorscore=0 mlxlogscore=792 bulkscore=0 suspectscore=0 clxscore=1015 spamscore=0 mlxscore=0 malwarescore=0 lowpriorityscore=0 priorityscore=1501 adultscore=0 classifier=spam adjust=0 reason=mlx scancount=1 engine=8.12.0-2311060000 definitions=main-2312020094 Precedence: bulk X-Mailing-List: linux-scsi@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: The registers, which are being touched in current SM8550 UFS PHY settings, and the values being programmed are mainly the ones working for HS-G4 mode, meanwhile, there are also a few ones somehow taken from HS-G5 PHY settings. However, even consider HS-G4 mode only, some of them are incorrect and some are missing. Rectify the HS-G4 PHY settings by strictly aligning with the SM8550 UFS PHY Hardware Programming Guide suggested HS-G4 PHY settings. Fixes: 1679bfef906f ("phy: qcom-qmp-ufs: Add SM8550 support") Reviewed-by: Dmitry Baryshkov Reviewed-by: Abel Vesa Reviewed-by: Manivannan Sadhasivam Signed-off-by: Can Guo --- .../qualcomm/phy-qcom-qmp-qserdes-txrx-ufs-v6.h | 1 + drivers/phy/qualcomm/phy-qcom-qmp-ufs.c | 28 +++++++++++++++------- 2 files changed, 20 insertions(+), 9 deletions(-) diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-qserdes-txrx-ufs-v6.h b/drivers/phy/qualcomm/phy-qcom-qmp-qserdes-txrx-ufs-v6.h index ae220fd..35d497f 100644 --- a/drivers/phy/qualcomm/phy-qcom-qmp-qserdes-txrx-ufs-v6.h +++ b/drivers/phy/qualcomm/phy-qcom-qmp-qserdes-txrx-ufs-v6.h @@ -11,6 +11,7 @@ #define QSERDES_UFS_V6_TX_RES_CODE_LANE_OFFSET_TX 0x30 #define QSERDES_UFS_V6_TX_RES_CODE_LANE_OFFSET_RX 0x34 #define QSERDES_UFS_V6_TX_LANE_MODE_1 0x7c +#define QSERDES_UFS_V6_TX_FR_DCC_CTRL 0x108 #define QSERDES_UFS_V6_RX_UCDR_FASTLOCK_FO_GAIN_RATE2 0x08 #define QSERDES_UFS_V6_RX_UCDR_FASTLOCK_FO_GAIN_RATE4 0x10 diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-ufs.c b/drivers/phy/qualcomm/phy-qcom-qmp-ufs.c index 5f79d18..3c2e625 100644 --- a/drivers/phy/qualcomm/phy-qcom-qmp-ufs.c +++ b/drivers/phy/qualcomm/phy-qcom-qmp-ufs.c @@ -763,22 +763,26 @@ static const struct qmp_phy_init_tbl sm8550_ufsphy_serdes[] = { QMP_PHY_INIT_CFG(QSERDES_V6_COM_PLL_CCTRL_MODE0, 0x14), QMP_PHY_INIT_CFG(QSERDES_V6_COM_LOCK_CMP1_MODE0, 0x7f), QMP_PHY_INIT_CFG(QSERDES_V6_COM_LOCK_CMP2_MODE0, 0x06), - QMP_PHY_INIT_CFG(QSERDES_V6_COM_DEC_START_MODE0, 0x4c), - QMP_PHY_INIT_CFG(QSERDES_V6_COM_CP_CTRL_MODE0, 0x0a), - QMP_PHY_INIT_CFG(QSERDES_V6_COM_PLL_RCTRL_MODE0, 0x18), - QMP_PHY_INIT_CFG(QSERDES_V6_COM_PLL_CCTRL_MODE0, 0x14), - QMP_PHY_INIT_CFG(QSERDES_V6_COM_LOCK_CMP1_MODE0, 0x99), - QMP_PHY_INIT_CFG(QSERDES_V6_COM_LOCK_CMP2_MODE0, 0x07), + QMP_PHY_INIT_CFG(QSERDES_V6_COM_DEC_START_MODE1, 0x4c), + QMP_PHY_INIT_CFG(QSERDES_V6_COM_CP_CTRL_MODE1, 0x0a), + QMP_PHY_INIT_CFG(QSERDES_V6_COM_PLL_RCTRL_MODE1, 0x18), + QMP_PHY_INIT_CFG(QSERDES_V6_COM_PLL_CCTRL_MODE1, 0x14), + QMP_PHY_INIT_CFG(QSERDES_V6_COM_LOCK_CMP1_MODE1, 0x99), + QMP_PHY_INIT_CFG(QSERDES_V6_COM_LOCK_CMP2_MODE1, 0x07), +}; + +static const struct qmp_phy_init_tbl sm8550_ufsphy_hs_b_serdes[] = { + QMP_PHY_INIT_CFG(QSERDES_V6_COM_VCO_TUNE_MAP, 0x44), }; static const struct qmp_phy_init_tbl sm8550_ufsphy_tx[] = { - QMP_PHY_INIT_CFG(QSERDES_V6_TX_LANE_MODE_1, 0x05), + QMP_PHY_INIT_CFG(QSERDES_UFS_V6_TX_LANE_MODE_1, 0x05), QMP_PHY_INIT_CFG(QSERDES_UFS_V6_TX_RES_CODE_LANE_OFFSET_TX, 0x07), + QMP_PHY_INIT_CFG(QSERDES_UFS_V6_TX_FR_DCC_CTRL, 0x4c), }; static const struct qmp_phy_init_tbl sm8550_ufsphy_rx[] = { - QMP_PHY_INIT_CFG(QSERDES_UFS_V6_RX_UCDR_FASTLOCK_FO_GAIN_RATE2, 0x0c), - QMP_PHY_INIT_CFG(QSERDES_UFS_V6_RX_UCDR_FASTLOCK_FO_GAIN_RATE4, 0x0f), + QMP_PHY_INIT_CFG(QSERDES_UFS_V6_RX_UCDR_FO_GAIN_RATE2, 0x0c), QMP_PHY_INIT_CFG(QSERDES_UFS_V6_RX_VGA_CAL_MAN_VAL, 0x0e), QMP_PHY_INIT_CFG(QSERDES_UFS_V6_RX_MODE_RATE_0_1_B0, 0xc2), @@ -801,6 +805,8 @@ static const struct qmp_phy_init_tbl sm8550_ufsphy_pcs[] = { QMP_PHY_INIT_CFG(QPHY_V6_PCS_UFS_TX_MID_TERM_CTRL1, 0x43), QMP_PHY_INIT_CFG(QPHY_V6_PCS_UFS_PLL_CNTL, 0x2b), QMP_PHY_INIT_CFG(QPHY_V6_PCS_UFS_MULTI_LANE_CTRL1, 0x02), + QMP_PHY_INIT_CFG(QPHY_V6_PCS_UFS_TX_HSGEAR_CAPABILITY, 0x04), + QMP_PHY_INIT_CFG(QPHY_V6_PCS_UFS_RX_HSGEAR_CAPABILITY, 0x04), }; static const struct qmp_phy_init_tbl sm8650_ufsphy_serdes[] = { @@ -1357,6 +1363,10 @@ static const struct qmp_phy_cfg sm8550_ufsphy_cfg = { .pcs = sm8550_ufsphy_pcs, .pcs_num = ARRAY_SIZE(sm8550_ufsphy_pcs), }, + .tbls_hs_b = { + .serdes = sm8550_ufsphy_hs_b_serdes, + .serdes_num = ARRAY_SIZE(sm8550_ufsphy_hs_b_serdes), + }, .clk_list = sdm845_ufs_phy_clk_l, .num_clks = ARRAY_SIZE(sdm845_ufs_phy_clk_l), .vreg_list = qmp_phy_vreg_l, From patchwork Sat Dec 2 12:36:16 2023 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Can Guo X-Patchwork-Id: 13476919 Authentication-Results: smtp.subspace.kernel.org; dkim=pass (2048-bit key) header.d=quicinc.com header.i=@quicinc.com header.b="Mup3/G6F" Received: from mx0b-0031df01.pphosted.com (mx0b-0031df01.pphosted.com [205.220.180.131]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 49AC81725; Sat, 2 Dec 2023 04:37:22 -0800 (PST) Received: from pps.filterd (m0279868.ppops.net [127.0.0.1]) by mx0a-0031df01.pphosted.com (8.17.1.19/8.17.1.19) with ESMTP id 3B2CasMK030172; Sat, 2 Dec 2023 12:36:54 GMT DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=quicinc.com; h=from : to : cc : subject : date : message-id : in-reply-to : references; s=qcppdkim1; bh=Bw5vApMqZHBOE4TbP3Du/Yd/ugk2Z52ewdZ7j9Lo+dc=; b=Mup3/G6FdRdWhBtkav87vKzyFtzMJTEVv97azjuq2+WykgoLGzl2TBViEktjQzUsTx2o +tGVTC78JzqD2BkzhqtDdam/fFF8xvMff66Ou4qaNq5UqcNIgefNXBWgbW9ezvMLeoMk Lbf7Ml9RsHckUK2uCNGx/bq2yyNwT0DbZ3giq0Ct5zh6lt6UN/d2xQITW9670ZMC0kKk a67xmjc/AVqE3DmkghuLjo92xlnQ7yP+4SIvRfqZeWkCQykQlJu3bmsnprDCHWebapxm D8DrxnAKxmwLRBvycria7cbaBSz73cDXUfSTA84AKUNizNP31tkS2jodq++iKzZ7Pvwg Sg== Received: from nasanppmta05.qualcomm.com (i-global254.qualcomm.com [199.106.103.254]) by mx0a-0031df01.pphosted.com (PPS) with ESMTPS id 3uquwt0ms4-1 (version=TLSv1.2 cipher=ECDHE-RSA-AES256-GCM-SHA384 bits=256 verify=NOT); Sat, 02 Dec 2023 12:36:54 +0000 Received: from pps.filterd (NASANPPMTA05.qualcomm.com [127.0.0.1]) by NASANPPMTA05.qualcomm.com (8.17.1.5/8.17.1.5) with ESMTP id 3B2Cafnx011398; Sat, 2 Dec 2023 12:36:53 GMT Received: from pps.reinject (localhost [127.0.0.1]) by NASANPPMTA05.qualcomm.com (PPS) with ESMTP id 3uqwnkbdcg-1; Sat, 02 Dec 2023 12:36:53 +0000 Received: from NASANPPMTA05.qualcomm.com (NASANPPMTA05.qualcomm.com [127.0.0.1]) by pps.reinject (8.17.1.5/8.17.1.5) with ESMTP id 3B2CZhes009891; Sat, 2 Dec 2023 12:36:53 GMT Received: from stor-dylan.qualcomm.com (stor-dylan.qualcomm.com [192.168.140.207]) by NASANPPMTA05.qualcomm.com (PPS) with ESMTP id 3B2CaqLI011493; Sat, 02 Dec 2023 12:36:53 +0000 Received: by stor-dylan.qualcomm.com (Postfix, from userid 359480) id 12FFD20A90; Sat, 2 Dec 2023 04:36:52 -0800 (PST) From: Can Guo To: quic_cang@quicinc.com, bvanassche@acm.org, mani@kernel.org, adrian.hunter@intel.com, vkoul@kernel.org, beanhuo@micron.com, avri.altman@wdc.com, junwoo80.lee@samsung.com, martin.petersen@oracle.com Cc: linux-scsi@vger.kernel.org, linux-arm-msm@vger.kernel.org, Andy Gross , Bjorn Andersson , Konrad Dybcio , Kishon Vijay Abraham I , linux-phy@lists.infradead.org (open list:GENERIC PHY FRAMEWORK), linux-kernel@vger.kernel.org (open list) Subject: [PATCH v8 10/10] phy: qualcomm: phy-qcom-qmp-ufs: Add High Speed Gear 5 support for SM8550 Date: Sat, 2 Dec 2023 04:36:16 -0800 Message-Id: <1701520577-31163-11-git-send-email-quic_cang@quicinc.com> X-Mailer: git-send-email 2.7.4 In-Reply-To: <1701520577-31163-1-git-send-email-quic_cang@quicinc.com> References: <1701520577-31163-1-git-send-email-quic_cang@quicinc.com> X-QCInternal: smtphost X-QCInternal: smtphost X-Proofpoint-Virus-Version: vendor=nai engine=6200 definitions=5800 signatures=585085 X-Proofpoint-Virus-Version: vendor=nai engine=6200 definitions=5800 signatures=585085 X-Proofpoint-GUID: kFlBiPnNY5DSC8KZOFlmmSWb0z6GwHUT X-Proofpoint-ORIG-GUID: kFlBiPnNY5DSC8KZOFlmmSWb0z6GwHUT X-Proofpoint-Virus-Version: vendor=baseguard engine=ICAP:2.0.272,Aquarius:18.0.997,Hydra:6.0.619,FMLib:17.11.176.26 definitions=2023-12-02_10,2023-11-30_01,2023-05-22_02 X-Proofpoint-Spam-Details: rule=outbound_notspam policy=outbound score=0 suspectscore=0 adultscore=0 clxscore=1015 impostorscore=0 mlxlogscore=999 bulkscore=0 phishscore=0 priorityscore=1501 malwarescore=0 lowpriorityscore=0 spamscore=0 mlxscore=0 classifier=spam adjust=0 reason=mlx scancount=1 engine=8.12.0-2311060000 definitions=main-2312020094 Precedence: bulk X-Mailing-List: linux-scsi@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: On SM8550, two sets of UFS PHY settings are provided, one set is to support HS-G5, another set is to support HS-G4 and lower gears. The two sets of PHY settings are programming different values to different registers, mixing the two sets and/or overwriting one set with another set is definitely not blessed by UFS PHY designers. To add HS-G5 support for SM8550, split the two sets of PHY settings into their dedicated overlay tables, only the common parts of the two sets of PHY settings are left in the .tbls. Consider we are going to add even higher gear support in future, to avoid adding more tables with different names, rename the .tbls_hs_g4 and make it an array, a size of 2 is enough as of now. In this case, .tbls alone is not a complete set of PHY settings, so either tbls_hs_overlay[0] or tbls_hs_overlay[1] must be applied on top of the .tbls to become a complete set of PHY settings. Reviewed-by: Manivannan Sadhasivam Signed-off-by: Can Guo Reviewed-by: Dmitry Baryshkov --- drivers/phy/qualcomm/phy-qcom-qmp-pcs-ufs-v6.h | 2 + drivers/phy/qualcomm/phy-qcom-qmp-qserdes-com-v6.h | 2 + .../qualcomm/phy-qcom-qmp-qserdes-txrx-ufs-v6.h | 8 + drivers/phy/qualcomm/phy-qcom-qmp-ufs.c | 169 ++++++++++++++++++--- 4 files changed, 159 insertions(+), 22 deletions(-) diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-pcs-ufs-v6.h b/drivers/phy/qualcomm/phy-qcom-qmp-pcs-ufs-v6.h index fe6c450..970cc06 100644 --- a/drivers/phy/qualcomm/phy-qcom-qmp-pcs-ufs-v6.h +++ b/drivers/phy/qualcomm/phy-qcom-qmp-pcs-ufs-v6.h @@ -19,6 +19,7 @@ #define QPHY_V6_PCS_UFS_BIST_FIXED_PAT_CTRL 0x060 #define QPHY_V6_PCS_UFS_TX_HSGEAR_CAPABILITY 0x074 #define QPHY_V6_PCS_UFS_RX_HSGEAR_CAPABILITY 0x0bc +#define QPHY_V6_PCS_UFS_RX_HS_G5_SYNC_LENGTH_CAPABILITY 0x12c #define QPHY_V6_PCS_UFS_DEBUG_BUS_CLKSEL 0x158 #define QPHY_V6_PCS_UFS_LINECFG_DISABLE 0x17c #define QPHY_V6_PCS_UFS_RX_MIN_HIBERN8_TIME 0x184 @@ -28,5 +29,6 @@ #define QPHY_V6_PCS_UFS_READY_STATUS 0x1a8 #define QPHY_V6_PCS_UFS_TX_MID_TERM_CTRL1 0x1f4 #define QPHY_V6_PCS_UFS_MULTI_LANE_CTRL1 0x1fc +#define QPHY_V6_PCS_UFS_RX_HSG5_SYNC_WAIT_TIME 0x220 #endif diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-qserdes-com-v6.h b/drivers/phy/qualcomm/phy-qcom-qmp-qserdes-com-v6.h index f420f8f..ef392ce 100644 --- a/drivers/phy/qualcomm/phy-qcom-qmp-qserdes-com-v6.h +++ b/drivers/phy/qualcomm/phy-qcom-qmp-qserdes-com-v6.h @@ -56,6 +56,8 @@ #define QSERDES_V6_COM_SYS_CLK_CTRL 0xe4 #define QSERDES_V6_COM_SYSCLK_BUF_ENABLE 0xe8 #define QSERDES_V6_COM_PLL_IVCO 0xf4 +#define QSERDES_V6_COM_CMN_IETRIM 0xfc +#define QSERDES_V6_COM_CMN_IPTRIM 0x100 #define QSERDES_V6_COM_SYSCLK_EN_SEL 0x110 #define QSERDES_V6_COM_RESETSM_CNTRL 0x118 #define QSERDES_V6_COM_LOCK_CMP_EN 0x120 diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-qserdes-txrx-ufs-v6.h b/drivers/phy/qualcomm/phy-qcom-qmp-qserdes-txrx-ufs-v6.h index 35d497f..d9a87bd 100644 --- a/drivers/phy/qualcomm/phy-qcom-qmp-qserdes-txrx-ufs-v6.h +++ b/drivers/phy/qualcomm/phy-qcom-qmp-qserdes-txrx-ufs-v6.h @@ -15,13 +15,19 @@ #define QSERDES_UFS_V6_RX_UCDR_FASTLOCK_FO_GAIN_RATE2 0x08 #define QSERDES_UFS_V6_RX_UCDR_FASTLOCK_FO_GAIN_RATE4 0x10 +#define QSERDES_UFS_V6_RX_UCDR_FASTLOCK_SO_GAIN_RATE4 0x24 #define QSERDES_UFS_V6_RX_UCDR_SO_SATURATION 0x28 +#define QSERDES_UFS_V6_RX_UCDR_FASTLOCK_COUNT_HIGH_RATE4 0x54 #define QSERDES_UFS_V6_RX_UCDR_PI_CTRL1 0x58 #define QSERDES_UFS_V6_RX_RX_TERM_BW_CTRL0 0xc4 #define QSERDES_UFS_V6_RX_UCDR_FO_GAIN_RATE2 0xd4 #define QSERDES_UFS_V6_RX_UCDR_FO_GAIN_RATE4 0xdc +#define QSERDES_UFS_V6_RX_UCDR_SO_GAIN_RATE4 0xf0 +#define QSERDES_UFS_V6_RX_UCDR_PI_CONTROLS 0xf4 #define QSERDES_UFS_V6_RX_VGA_CAL_MAN_VAL 0x178 +#define QSERDES_UFS_V6_RX_EQ_OFFSET_ADAPTOR_CNTRL1 0x1bc #define QSERDES_UFS_V6_RX_INTERFACE_MODE 0x1e0 +#define QSERDES_UFS_V6_RX_OFFSET_ADAPTOR_CNTRL3 0x1c4 #define QSERDES_UFS_V6_RX_MODE_RATE_0_1_B0 0x208 #define QSERDES_UFS_V6_RX_MODE_RATE_0_1_B1 0x20c #define QSERDES_UFS_V6_RX_MODE_RATE_0_1_B3 0x214 @@ -33,6 +39,8 @@ #define QSERDES_UFS_V6_RX_MODE_RATE3_B5 0x264 #define QSERDES_UFS_V6_RX_MODE_RATE3_B8 0x270 #define QSERDES_UFS_V6_RX_MODE_RATE4_B3 0x280 +#define QSERDES_UFS_V6_RX_MODE_RATE4_B4 0x284 #define QSERDES_UFS_V6_RX_MODE_RATE4_B6 0x28c +#define QSERDES_UFS_V6_RX_DLL0_FTUNE_CTRL 0x2f8 #endif diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-ufs.c b/drivers/phy/qualcomm/phy-qcom-qmp-ufs.c index 3c2e625..11cea34 100644 --- a/drivers/phy/qualcomm/phy-qcom-qmp-ufs.c +++ b/drivers/phy/qualcomm/phy-qcom-qmp-ufs.c @@ -41,6 +41,8 @@ #define PHY_INIT_COMPLETE_TIMEOUT 10000 +#define NUM_OVERLAY 2 + struct qmp_phy_init_tbl { unsigned int offset; unsigned int val; @@ -754,15 +756,22 @@ static const struct qmp_phy_init_tbl sm8550_ufsphy_serdes[] = { QMP_PHY_INIT_CFG(QSERDES_V6_COM_HSCLK_SEL_1, 0x11), QMP_PHY_INIT_CFG(QSERDES_V6_COM_HSCLK_HS_SWITCH_SEL_1, 0x00), QMP_PHY_INIT_CFG(QSERDES_V6_COM_LOCK_CMP_EN, 0x01), - QMP_PHY_INIT_CFG(QSERDES_V6_COM_VCO_TUNE_MAP, 0x04), - QMP_PHY_INIT_CFG(QSERDES_V6_COM_PLL_IVCO, 0x0f), QMP_PHY_INIT_CFG(QSERDES_V6_COM_VCO_TUNE_INITVAL2, 0x00), QMP_PHY_INIT_CFG(QSERDES_V6_COM_DEC_START_MODE0, 0x41), - QMP_PHY_INIT_CFG(QSERDES_V6_COM_CP_CTRL_MODE0, 0x0a), QMP_PHY_INIT_CFG(QSERDES_V6_COM_PLL_RCTRL_MODE0, 0x18), QMP_PHY_INIT_CFG(QSERDES_V6_COM_PLL_CCTRL_MODE0, 0x14), QMP_PHY_INIT_CFG(QSERDES_V6_COM_LOCK_CMP1_MODE0, 0x7f), QMP_PHY_INIT_CFG(QSERDES_V6_COM_LOCK_CMP2_MODE0, 0x06), +}; + +static const struct qmp_phy_init_tbl sm8550_ufsphy_hs_b_serdes[] = { + QMP_PHY_INIT_CFG(QSERDES_V6_COM_VCO_TUNE_MAP, 0x44), +}; + +static const struct qmp_phy_init_tbl sm8550_ufsphy_g4_serdes[] = { + QMP_PHY_INIT_CFG(QSERDES_V6_COM_VCO_TUNE_MAP, 0x04), + QMP_PHY_INIT_CFG(QSERDES_V6_COM_PLL_IVCO, 0x0f), + QMP_PHY_INIT_CFG(QSERDES_V6_COM_CP_CTRL_MODE0, 0x0a), QMP_PHY_INIT_CFG(QSERDES_V6_COM_DEC_START_MODE1, 0x4c), QMP_PHY_INIT_CFG(QSERDES_V6_COM_CP_CTRL_MODE1, 0x0a), QMP_PHY_INIT_CFG(QSERDES_V6_COM_PLL_RCTRL_MODE1, 0x18), @@ -771,19 +780,24 @@ static const struct qmp_phy_init_tbl sm8550_ufsphy_serdes[] = { QMP_PHY_INIT_CFG(QSERDES_V6_COM_LOCK_CMP2_MODE1, 0x07), }; -static const struct qmp_phy_init_tbl sm8550_ufsphy_hs_b_serdes[] = { - QMP_PHY_INIT_CFG(QSERDES_V6_COM_VCO_TUNE_MAP, 0x44), +static const struct qmp_phy_init_tbl sm8550_ufsphy_g5_serdes[] = { + QMP_PHY_INIT_CFG(QSERDES_V6_COM_PLL_IVCO, 0x1f), + QMP_PHY_INIT_CFG(QSERDES_V6_COM_CMN_IETRIM, 0x1b), + QMP_PHY_INIT_CFG(QSERDES_V6_COM_CMN_IPTRIM, 0x1c), + QMP_PHY_INIT_CFG(QSERDES_V6_COM_CP_CTRL_MODE0, 0x06), }; static const struct qmp_phy_init_tbl sm8550_ufsphy_tx[] = { QMP_PHY_INIT_CFG(QSERDES_UFS_V6_TX_LANE_MODE_1, 0x05), QMP_PHY_INIT_CFG(QSERDES_UFS_V6_TX_RES_CODE_LANE_OFFSET_TX, 0x07), +}; + +static const struct qmp_phy_init_tbl sm8550_ufsphy_g4_tx[] = { QMP_PHY_INIT_CFG(QSERDES_UFS_V6_TX_FR_DCC_CTRL, 0x4c), }; static const struct qmp_phy_init_tbl sm8550_ufsphy_rx[] = { QMP_PHY_INIT_CFG(QSERDES_UFS_V6_RX_UCDR_FO_GAIN_RATE2, 0x0c), - QMP_PHY_INIT_CFG(QSERDES_UFS_V6_RX_VGA_CAL_MAN_VAL, 0x0e), QMP_PHY_INIT_CFG(QSERDES_UFS_V6_RX_MODE_RATE_0_1_B0, 0xc2), QMP_PHY_INIT_CFG(QSERDES_UFS_V6_RX_MODE_RATE_0_1_B1, 0xc2), @@ -799,16 +813,45 @@ static const struct qmp_phy_init_tbl sm8550_ufsphy_rx[] = { QMP_PHY_INIT_CFG(QSERDES_UFS_V6_RX_MODE_RATE3_B8, 0x02), }; +static const struct qmp_phy_init_tbl sm8550_ufsphy_g4_rx[] = { + QMP_PHY_INIT_CFG(QSERDES_UFS_V6_RX_VGA_CAL_MAN_VAL, 0x0e), +}; + +static const struct qmp_phy_init_tbl sm8550_ufsphy_g5_rx[] = { + QMP_PHY_INIT_CFG(QSERDES_UFS_V6_RX_UCDR_FO_GAIN_RATE4, 0x0c), + QMP_PHY_INIT_CFG(QSERDES_UFS_V6_RX_UCDR_SO_GAIN_RATE4, 0x04), + QMP_PHY_INIT_CFG(QSERDES_UFS_V6_RX_EQ_OFFSET_ADAPTOR_CNTRL1, 0x14), + QMP_PHY_INIT_CFG(QSERDES_UFS_V6_RX_UCDR_PI_CONTROLS, 0x07), + QMP_PHY_INIT_CFG(QSERDES_UFS_V6_RX_OFFSET_ADAPTOR_CNTRL3, 0x0e), + QMP_PHY_INIT_CFG(QSERDES_UFS_V6_RX_UCDR_FASTLOCK_COUNT_HIGH_RATE4, 0x02), + QMP_PHY_INIT_CFG(QSERDES_UFS_V6_RX_UCDR_FASTLOCK_FO_GAIN_RATE4, 0x1c), + QMP_PHY_INIT_CFG(QSERDES_UFS_V6_RX_UCDR_FASTLOCK_SO_GAIN_RATE4, 0x06), + QMP_PHY_INIT_CFG(QSERDES_UFS_V6_RX_VGA_CAL_MAN_VAL, 0x08), + QMP_PHY_INIT_CFG(QSERDES_UFS_V6_RX_MODE_RATE4_B3, 0xb9), + QMP_PHY_INIT_CFG(QSERDES_UFS_V6_RX_MODE_RATE4_B4, 0x4f), + QMP_PHY_INIT_CFG(QSERDES_UFS_V6_RX_MODE_RATE4_B6, 0xff), + QMP_PHY_INIT_CFG(QSERDES_UFS_V6_RX_DLL0_FTUNE_CTRL, 0x30), +}; + static const struct qmp_phy_init_tbl sm8550_ufsphy_pcs[] = { QMP_PHY_INIT_CFG(QPHY_V6_PCS_UFS_RX_SIGDET_CTRL2, 0x69), QMP_PHY_INIT_CFG(QPHY_V6_PCS_UFS_TX_LARGE_AMP_DRV_LVL, 0x0f), QMP_PHY_INIT_CFG(QPHY_V6_PCS_UFS_TX_MID_TERM_CTRL1, 0x43), - QMP_PHY_INIT_CFG(QPHY_V6_PCS_UFS_PLL_CNTL, 0x2b), QMP_PHY_INIT_CFG(QPHY_V6_PCS_UFS_MULTI_LANE_CTRL1, 0x02), +}; + +static const struct qmp_phy_init_tbl sm8550_ufsphy_g4_pcs[] = { + QMP_PHY_INIT_CFG(QPHY_V6_PCS_UFS_PLL_CNTL, 0x2b), QMP_PHY_INIT_CFG(QPHY_V6_PCS_UFS_TX_HSGEAR_CAPABILITY, 0x04), QMP_PHY_INIT_CFG(QPHY_V6_PCS_UFS_RX_HSGEAR_CAPABILITY, 0x04), }; +static const struct qmp_phy_init_tbl sm8550_ufsphy_g5_pcs[] = { + QMP_PHY_INIT_CFG(QPHY_V6_PCS_UFS_PLL_CNTL, 0x33), + QMP_PHY_INIT_CFG(QPHY_V6_PCS_UFS_RX_HS_G5_SYNC_LENGTH_CAPABILITY, 0x4f), + QMP_PHY_INIT_CFG(QPHY_V6_PCS_UFS_RX_HSG5_SYNC_WAIT_TIME, 0x9e), +}; + static const struct qmp_phy_init_tbl sm8650_ufsphy_serdes[] = { QMP_PHY_INIT_CFG(QSERDES_V6_COM_SYSCLK_EN_SEL, 0xd9), QMP_PHY_INIT_CFG(QSERDES_V6_COM_CMN_CONFIG_1, 0x16), @@ -889,6 +932,8 @@ struct qmp_phy_cfg_tbls { int rx_num; const struct qmp_phy_init_tbl *pcs; int pcs_num; + /* Maximum supported Gear of this tbls */ + u32 max_gear; }; /* struct qmp_phy_cfg - per-PHY initialization config */ @@ -896,13 +941,15 @@ struct qmp_phy_cfg { int lanes; const struct qmp_ufs_offsets *offsets; + /* Maximum supported Gear of this config */ + u32 max_supported_gear; /* Main init sequence for PHY blocks - serdes, tx, rx, pcs */ const struct qmp_phy_cfg_tbls tbls; /* Additional sequence for HS Series B */ const struct qmp_phy_cfg_tbls tbls_hs_b; - /* Additional sequence for HS G4 */ - const struct qmp_phy_cfg_tbls tbls_hs_g4; + /* Additional sequence for different HS Gears */ + const struct qmp_phy_cfg_tbls tbls_hs_overlay[NUM_OVERLAY]; /* clock ids to be requested */ const char * const *clk_list; @@ -1005,6 +1052,7 @@ static const struct qmp_phy_cfg msm8996_ufsphy_cfg = { .lanes = 1, .offsets = &qmp_ufs_offsets, + .max_supported_gear = UFS_HS_G3, .tbls = { .serdes = msm8996_ufsphy_serdes, @@ -1030,6 +1078,7 @@ static const struct qmp_phy_cfg sa8775p_ufsphy_cfg = { .lanes = 2, .offsets = &qmp_ufs_offsets, + .max_supported_gear = UFS_HS_G4, .tbls = { .serdes = sm8350_ufsphy_serdes, @@ -1045,13 +1094,14 @@ static const struct qmp_phy_cfg sa8775p_ufsphy_cfg = { .serdes = sm8350_ufsphy_hs_b_serdes, .serdes_num = ARRAY_SIZE(sm8350_ufsphy_hs_b_serdes), }, - .tbls_hs_g4 = { + .tbls_hs_overlay[0] = { .tx = sm8350_ufsphy_g4_tx, .tx_num = ARRAY_SIZE(sm8350_ufsphy_g4_tx), .rx = sm8350_ufsphy_g4_rx, .rx_num = ARRAY_SIZE(sm8350_ufsphy_g4_rx), .pcs = sm8350_ufsphy_g4_pcs, .pcs_num = ARRAY_SIZE(sm8350_ufsphy_g4_pcs), + .max_gear = UFS_HS_G4, }, .clk_list = sm8450_ufs_phy_clk_l, .num_clks = ARRAY_SIZE(sm8450_ufs_phy_clk_l), @@ -1064,6 +1114,7 @@ static const struct qmp_phy_cfg sc7280_ufsphy_cfg = { .lanes = 2, .offsets = &qmp_ufs_offsets, + .max_supported_gear = UFS_HS_G4, .tbls = { .serdes = sm8150_ufsphy_serdes, @@ -1079,13 +1130,14 @@ static const struct qmp_phy_cfg sc7280_ufsphy_cfg = { .serdes = sm8150_ufsphy_hs_b_serdes, .serdes_num = ARRAY_SIZE(sm8150_ufsphy_hs_b_serdes), }, - .tbls_hs_g4 = { + .tbls_hs_overlay[0] = { .tx = sm8250_ufsphy_hs_g4_tx, .tx_num = ARRAY_SIZE(sm8250_ufsphy_hs_g4_tx), .rx = sc7280_ufsphy_hs_g4_rx, .rx_num = ARRAY_SIZE(sc7280_ufsphy_hs_g4_rx), .pcs = sm8150_ufsphy_hs_g4_pcs, .pcs_num = ARRAY_SIZE(sm8150_ufsphy_hs_g4_pcs), + .max_gear = UFS_HS_G4, }, .clk_list = sm8450_ufs_phy_clk_l, .num_clks = ARRAY_SIZE(sm8450_ufs_phy_clk_l), @@ -1098,6 +1150,7 @@ static const struct qmp_phy_cfg sc8280xp_ufsphy_cfg = { .lanes = 2, .offsets = &qmp_ufs_offsets, + .max_supported_gear = UFS_HS_G4, .tbls = { .serdes = sm8350_ufsphy_serdes, @@ -1113,13 +1166,14 @@ static const struct qmp_phy_cfg sc8280xp_ufsphy_cfg = { .serdes = sm8350_ufsphy_hs_b_serdes, .serdes_num = ARRAY_SIZE(sm8350_ufsphy_hs_b_serdes), }, - .tbls_hs_g4 = { + .tbls_hs_overlay[0] = { .tx = sm8350_ufsphy_g4_tx, .tx_num = ARRAY_SIZE(sm8350_ufsphy_g4_tx), .rx = sm8350_ufsphy_g4_rx, .rx_num = ARRAY_SIZE(sm8350_ufsphy_g4_rx), .pcs = sm8350_ufsphy_g4_pcs, .pcs_num = ARRAY_SIZE(sm8350_ufsphy_g4_pcs), + .max_gear = UFS_HS_G4, }, .clk_list = sdm845_ufs_phy_clk_l, .num_clks = ARRAY_SIZE(sdm845_ufs_phy_clk_l), @@ -1132,6 +1186,7 @@ static const struct qmp_phy_cfg sdm845_ufsphy_cfg = { .lanes = 2, .offsets = &qmp_ufs_offsets, + .max_supported_gear = UFS_HS_G3, .tbls = { .serdes = sdm845_ufsphy_serdes, @@ -1160,6 +1215,7 @@ static const struct qmp_phy_cfg sm6115_ufsphy_cfg = { .lanes = 1, .offsets = &qmp_ufs_offsets, + .max_supported_gear = UFS_HS_G3, .tbls = { .serdes = sm6115_ufsphy_serdes, @@ -1188,6 +1244,7 @@ static const struct qmp_phy_cfg sm7150_ufsphy_cfg = { .lanes = 1, .offsets = &qmp_ufs_offsets, + .max_supported_gear = UFS_HS_G3, .tbls = { .serdes = sdm845_ufsphy_serdes, @@ -1216,6 +1273,7 @@ static const struct qmp_phy_cfg sm8150_ufsphy_cfg = { .lanes = 2, .offsets = &qmp_ufs_offsets, + .max_supported_gear = UFS_HS_G4, .tbls = { .serdes = sm8150_ufsphy_serdes, @@ -1231,13 +1289,14 @@ static const struct qmp_phy_cfg sm8150_ufsphy_cfg = { .serdes = sm8150_ufsphy_hs_b_serdes, .serdes_num = ARRAY_SIZE(sm8150_ufsphy_hs_b_serdes), }, - .tbls_hs_g4 = { + .tbls_hs_overlay[0] = { .tx = sm8150_ufsphy_hs_g4_tx, .tx_num = ARRAY_SIZE(sm8150_ufsphy_hs_g4_tx), .rx = sm8150_ufsphy_hs_g4_rx, .rx_num = ARRAY_SIZE(sm8150_ufsphy_hs_g4_rx), .pcs = sm8150_ufsphy_hs_g4_pcs, .pcs_num = ARRAY_SIZE(sm8150_ufsphy_hs_g4_pcs), + .max_gear = UFS_HS_G4, }, .clk_list = sdm845_ufs_phy_clk_l, .num_clks = ARRAY_SIZE(sdm845_ufs_phy_clk_l), @@ -1250,6 +1309,7 @@ static const struct qmp_phy_cfg sm8250_ufsphy_cfg = { .lanes = 2, .offsets = &qmp_ufs_offsets, + .max_supported_gear = UFS_HS_G4, .tbls = { .serdes = sm8150_ufsphy_serdes, @@ -1265,13 +1325,14 @@ static const struct qmp_phy_cfg sm8250_ufsphy_cfg = { .serdes = sm8150_ufsphy_hs_b_serdes, .serdes_num = ARRAY_SIZE(sm8150_ufsphy_hs_b_serdes), }, - .tbls_hs_g4 = { + .tbls_hs_overlay[0] = { .tx = sm8250_ufsphy_hs_g4_tx, .tx_num = ARRAY_SIZE(sm8250_ufsphy_hs_g4_tx), .rx = sm8250_ufsphy_hs_g4_rx, .rx_num = ARRAY_SIZE(sm8250_ufsphy_hs_g4_rx), .pcs = sm8150_ufsphy_hs_g4_pcs, .pcs_num = ARRAY_SIZE(sm8150_ufsphy_hs_g4_pcs), + .max_gear = UFS_HS_G4, }, .clk_list = sdm845_ufs_phy_clk_l, .num_clks = ARRAY_SIZE(sdm845_ufs_phy_clk_l), @@ -1284,6 +1345,7 @@ static const struct qmp_phy_cfg sm8350_ufsphy_cfg = { .lanes = 2, .offsets = &qmp_ufs_offsets, + .max_supported_gear = UFS_HS_G4, .tbls = { .serdes = sm8350_ufsphy_serdes, @@ -1299,13 +1361,14 @@ static const struct qmp_phy_cfg sm8350_ufsphy_cfg = { .serdes = sm8350_ufsphy_hs_b_serdes, .serdes_num = ARRAY_SIZE(sm8350_ufsphy_hs_b_serdes), }, - .tbls_hs_g4 = { + .tbls_hs_overlay[0] = { .tx = sm8350_ufsphy_g4_tx, .tx_num = ARRAY_SIZE(sm8350_ufsphy_g4_tx), .rx = sm8350_ufsphy_g4_rx, .rx_num = ARRAY_SIZE(sm8350_ufsphy_g4_rx), .pcs = sm8350_ufsphy_g4_pcs, .pcs_num = ARRAY_SIZE(sm8350_ufsphy_g4_pcs), + .max_gear = UFS_HS_G4, }, .clk_list = sdm845_ufs_phy_clk_l, .num_clks = ARRAY_SIZE(sdm845_ufs_phy_clk_l), @@ -1318,6 +1381,7 @@ static const struct qmp_phy_cfg sm8450_ufsphy_cfg = { .lanes = 2, .offsets = &qmp_ufs_offsets, + .max_supported_gear = UFS_HS_G4, .tbls = { .serdes = sm8350_ufsphy_serdes, @@ -1333,13 +1397,14 @@ static const struct qmp_phy_cfg sm8450_ufsphy_cfg = { .serdes = sm8350_ufsphy_hs_b_serdes, .serdes_num = ARRAY_SIZE(sm8350_ufsphy_hs_b_serdes), }, - .tbls_hs_g4 = { + .tbls_hs_overlay[0] = { .tx = sm8350_ufsphy_g4_tx, .tx_num = ARRAY_SIZE(sm8350_ufsphy_g4_tx), .rx = sm8350_ufsphy_g4_rx, .rx_num = ARRAY_SIZE(sm8350_ufsphy_g4_rx), .pcs = sm8350_ufsphy_g4_pcs, .pcs_num = ARRAY_SIZE(sm8350_ufsphy_g4_pcs), + .max_gear = UFS_HS_G4, }, .clk_list = sm8450_ufs_phy_clk_l, .num_clks = ARRAY_SIZE(sm8450_ufs_phy_clk_l), @@ -1352,6 +1417,7 @@ static const struct qmp_phy_cfg sm8550_ufsphy_cfg = { .lanes = 2, .offsets = &qmp_ufs_offsets_v6, + .max_supported_gear = UFS_HS_G5, .tbls = { .serdes = sm8550_ufsphy_serdes, @@ -1367,6 +1433,26 @@ static const struct qmp_phy_cfg sm8550_ufsphy_cfg = { .serdes = sm8550_ufsphy_hs_b_serdes, .serdes_num = ARRAY_SIZE(sm8550_ufsphy_hs_b_serdes), }, + .tbls_hs_overlay[0] = { + .serdes = sm8550_ufsphy_g4_serdes, + .serdes_num = ARRAY_SIZE(sm8550_ufsphy_g4_serdes), + .tx = sm8550_ufsphy_g4_tx, + .tx_num = ARRAY_SIZE(sm8550_ufsphy_g4_tx), + .rx = sm8550_ufsphy_g4_rx, + .rx_num = ARRAY_SIZE(sm8550_ufsphy_g4_rx), + .pcs = sm8550_ufsphy_g4_pcs, + .pcs_num = ARRAY_SIZE(sm8550_ufsphy_g4_pcs), + .max_gear = UFS_HS_G4, + }, + .tbls_hs_overlay[1] = { + .serdes = sm8550_ufsphy_g5_serdes, + .serdes_num = ARRAY_SIZE(sm8550_ufsphy_g5_serdes), + .rx = sm8550_ufsphy_g5_rx, + .rx_num = ARRAY_SIZE(sm8550_ufsphy_g5_rx), + .pcs = sm8550_ufsphy_g5_pcs, + .pcs_num = ARRAY_SIZE(sm8550_ufsphy_g5_pcs), + .max_gear = UFS_HS_G5, + }, .clk_list = sdm845_ufs_phy_clk_l, .num_clks = ARRAY_SIZE(sdm845_ufs_phy_clk_l), .vreg_list = qmp_phy_vreg_l, @@ -1378,6 +1464,7 @@ static const struct qmp_phy_cfg sm8650_ufsphy_cfg = { .lanes = 2, .offsets = &qmp_ufs_offsets_v6, + .max_supported_gear = UFS_HS_G5, .tbls = { .serdes = sm8650_ufsphy_serdes, @@ -1451,17 +1538,49 @@ static void qmp_ufs_pcs_init(struct qmp_ufs *qmp, const struct qmp_phy_cfg_tbls qmp_ufs_configure(pcs, tbls->pcs, tbls->pcs_num); } +static int qmp_ufs_get_gear_overlay(struct qmp_ufs *qmp, const struct qmp_phy_cfg *cfg) +{ + u32 max_gear, floor_max_gear = cfg->max_supported_gear; + int idx, ret = -EINVAL; + + for (idx = NUM_OVERLAY - 1; idx >= 0; idx--) { + max_gear = cfg->tbls_hs_overlay[idx].max_gear; + + /* Skip if the table is not available */ + if (max_gear == 0) + continue; + + /* Direct matching, bail */ + if (qmp->submode == max_gear) + return idx; + + /* If no direct matching, the lowest gear is the best matching */ + if (max_gear < floor_max_gear) { + ret = idx; + floor_max_gear = max_gear; + } + } + + return ret; +} + static void qmp_ufs_init_registers(struct qmp_ufs *qmp, const struct qmp_phy_cfg *cfg) { + int i; + qmp_ufs_serdes_init(qmp, &cfg->tbls); - if (qmp->mode == PHY_MODE_UFS_HS_B) - qmp_ufs_serdes_init(qmp, &cfg->tbls_hs_b); qmp_ufs_lanes_init(qmp, &cfg->tbls); - if (qmp->submode == UFS_HS_G4) - qmp_ufs_lanes_init(qmp, &cfg->tbls_hs_g4); qmp_ufs_pcs_init(qmp, &cfg->tbls); - if (qmp->submode == UFS_HS_G4) - qmp_ufs_pcs_init(qmp, &cfg->tbls_hs_g4); + + i = qmp_ufs_get_gear_overlay(qmp, cfg); + if (i >= 0) { + qmp_ufs_serdes_init(qmp, &cfg->tbls_hs_overlay[i]); + qmp_ufs_lanes_init(qmp, &cfg->tbls_hs_overlay[i]); + qmp_ufs_pcs_init(qmp, &cfg->tbls_hs_overlay[i]); + } + + if (qmp->mode == PHY_MODE_UFS_HS_B) + qmp_ufs_serdes_init(qmp, &cfg->tbls_hs_b); } static int qmp_ufs_com_init(struct qmp_ufs *qmp) @@ -1633,6 +1752,12 @@ static int qmp_ufs_disable(struct phy *phy) static int qmp_ufs_set_mode(struct phy *phy, enum phy_mode mode, int submode) { struct qmp_ufs *qmp = phy_get_drvdata(phy); + const struct qmp_phy_cfg *cfg = qmp->cfg; + + if (submode > cfg->max_supported_gear || submode == 0) { + dev_err(qmp->dev, "Invalid PHY submode %d\n", submode); + return -EINVAL; + } qmp->mode = mode; qmp->submode = submode;