From patchwork Mon Dec 25 02:51:40 2023 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Can Guo X-Patchwork-Id: 13504450 Received: from mx0b-0031df01.pphosted.com (mx0b-0031df01.pphosted.com [205.220.180.131]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.subspace.kernel.org (Postfix) with ESMTPS id 0CA9D7F2; Mon, 25 Dec 2023 02:52:29 +0000 (UTC) Authentication-Results: smtp.subspace.kernel.org; dmarc=pass (p=none dis=none) header.from=quicinc.com Authentication-Results: smtp.subspace.kernel.org; spf=pass smtp.mailfrom=qualcomm.com Authentication-Results: smtp.subspace.kernel.org; dkim=pass (2048-bit key) header.d=quicinc.com header.i=@quicinc.com header.b="Pf5BcvcV" Received: from pps.filterd (m0279870.ppops.net [127.0.0.1]) by mx0a-0031df01.pphosted.com (8.17.1.24/8.17.1.24) with ESMTP id 3BP0l79S015281; Mon, 25 Dec 2023 02:51:51 GMT DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=quicinc.com; h= from:to:cc:subject:date:message-id:in-reply-to:references; s= qcppdkim1; bh=JEPkzAqIN/Sv9pzPse5I721bVLoIfMgitWmcZPC46GU=; b=Pf 5BcvcVh1NUDDY00NhCf3f+a54nfBEbZ4TjFVvRfw3t4F/NtvuFo8HLTf9fBR06li Eqi9bkh6tDyNZgojQasvfX75zU8VjeaE7pfRXWnFW+YR2CSwQWSdFfpYlpCDgDGY raEJ2N9jfjhRv7+g5e+kIKy/6IKmJZ2sSaXc+AHtGrUI3e4pvaWRvK1ujuptl2sR bqZsaQPe6HDjbLPtXW1cRzs9hssW7BWbOcZbctd3JjHkVzMIHT96smW652MPrxy4 Spd7wkhn/xukVeiha1cDCO5NwnfbHIGfOFQi1SMeTKp86Ni1MXG5iPkWToY9tCEm 6Klh8kohoAupb64kdd4A== Received: from nasanppmta04.qualcomm.com (i-global254.qualcomm.com [199.106.103.254]) by mx0a-0031df01.pphosted.com (PPS) with ESMTPS id 3v5qmyasqb-1 (version=TLSv1.2 cipher=ECDHE-RSA-AES256-GCM-SHA384 bits=256 verify=NOT); Mon, 25 Dec 2023 02:51:51 +0000 (GMT) Received: from pps.filterd (NASANPPMTA04.qualcomm.com [127.0.0.1]) by NASANPPMTA04.qualcomm.com (8.17.1.5/8.17.1.5) with ESMTP id 3BP2kAPJ025613; Mon, 25 Dec 2023 02:51:49 GMT Received: from pps.reinject (localhost [127.0.0.1]) by NASANPPMTA04.qualcomm.com (PPS) with ESMTP id 3v5rmkrxxp-1; Mon, 25 Dec 2023 02:51:49 +0000 Received: from NASANPPMTA04.qualcomm.com (NASANPPMTA04.qualcomm.com [127.0.0.1]) by pps.reinject (8.17.1.5/8.17.1.5) with ESMTP id 3BP2pnJw032214; Mon, 25 Dec 2023 02:51:49 GMT Received: from stor-dylan.qualcomm.com (stor-dylan.qualcomm.com [192.168.140.207]) by NASANPPMTA04.qualcomm.com (PPS) with ESMTP id 3BP2pnSm032206; Mon, 25 Dec 2023 02:51:49 +0000 Received: by stor-dylan.qualcomm.com (Postfix, from userid 359480) id 09F5820A8A; Sun, 24 Dec 2023 18:51:48 -0800 (PST) From: Can Guo To: quic_cang@quicinc.com, bvanassche@acm.org, mani@kernel.org, vkoul@kernel.org, abel.vesa@linaro.org, dmitry.baryshkov@linaro.org, neil.armstrong@linaro.org Cc: Andy Gross , Bjorn Andersson , Konrad Dybcio , Kishon Vijay Abraham I , Johan Hovold , linux-arm-msm@vger.kernel.org (open list:ARM/QUALCOMM SUPPORT), linux-phy@lists.infradead.org (open list:GENERIC PHY FRAMEWORK), linux-kernel@vger.kernel.org (open list) Subject: [PATCH v9 1/2] phy: qualcomm: phy-qcom-qmp-ufs: Rectify SM8550 UFS HS-G4 PHY Settings Date: Sun, 24 Dec 2023 18:51:40 -0800 Message-Id: <1703472701-34197-2-git-send-email-quic_cang@quicinc.com> X-Mailer: git-send-email 2.7.4 In-Reply-To: <1703472701-34197-1-git-send-email-quic_cang@quicinc.com> References: <1703472701-34197-1-git-send-email-quic_cang@quicinc.com> X-QCInternal: smtphost X-QCInternal: smtphost X-Proofpoint-Virus-Version: vendor=nai engine=6200 definitions=5800 signatures=585085 X-Proofpoint-Virus-Version: vendor=nai engine=6200 definitions=5800 signatures=585085 X-Proofpoint-GUID: DJ2qNCfYnR7tDfBmfuCZvwoT9pwalDa8 X-Proofpoint-ORIG-GUID: DJ2qNCfYnR7tDfBmfuCZvwoT9pwalDa8 X-Proofpoint-Virus-Version: vendor=baseguard engine=ICAP:2.0.272,Aquarius:18.0.997,Hydra:6.0.619,FMLib:17.11.176.26 definitions=2023-12-09_01,2023-12-07_01,2023-05-22_02 X-Proofpoint-Spam-Details: rule=outbound_notspam policy=outbound score=0 phishscore=0 clxscore=1015 suspectscore=0 bulkscore=0 impostorscore=0 spamscore=0 malwarescore=0 mlxscore=0 adultscore=0 lowpriorityscore=0 priorityscore=1501 mlxlogscore=792 classifier=spam adjust=0 reason=mlx scancount=1 engine=8.19.0-2311290000 definitions=main-2312250018 Precedence: bulk X-Mailing-List: linux-arm-msm@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: The registers, which are being touched in current SM8550 UFS PHY settings, and the values being programmed are mainly the ones working for HS-G4 mode, meanwhile, there are also a few ones somehow taken from HS-G5 PHY settings. However, even consider HS-G4 mode only, some of them are incorrect and some are missing. Rectify the HS-G4 PHY settings by strictly aligning with the SM8550 UFS PHY Hardware Programming Guide suggested HS-G4 PHY settings. Fixes: 1679bfef906f ("phy: qcom-qmp-ufs: Add SM8550 support") Reviewed-by: Dmitry Baryshkov Reviewed-by: Abel Vesa Reviewed-by: Manivannan Sadhasivam Signed-off-by: Can Guo --- .../qualcomm/phy-qcom-qmp-qserdes-txrx-ufs-v6.h | 3 +++ drivers/phy/qualcomm/phy-qcom-qmp-ufs.c | 28 +++++++++++++++------- 2 files changed, 22 insertions(+), 9 deletions(-) diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-qserdes-txrx-ufs-v6.h b/drivers/phy/qualcomm/phy-qcom-qmp-qserdes-txrx-ufs-v6.h index 15bcb4b..674f158 100644 --- a/drivers/phy/qualcomm/phy-qcom-qmp-qserdes-txrx-ufs-v6.h +++ b/drivers/phy/qualcomm/phy-qcom-qmp-qserdes-txrx-ufs-v6.h @@ -10,9 +10,12 @@ #define QSERDES_UFS_V6_TX_RES_CODE_LANE_RX 0x2c #define QSERDES_UFS_V6_TX_RES_CODE_LANE_OFFSET_TX 0x30 #define QSERDES_UFS_V6_TX_RES_CODE_LANE_OFFSET_RX 0x34 +#define QSERDES_UFS_V6_TX_LANE_MODE_1 0x7c +#define QSERDES_UFS_V6_TX_FR_DCC_CTRL 0x108 #define QSERDES_UFS_V6_RX_UCDR_FASTLOCK_FO_GAIN_RATE2 0x08 #define QSERDES_UFS_V6_RX_UCDR_FASTLOCK_FO_GAIN_RATE4 0x10 +#define QSERDES_UFS_V6_RX_UCDR_FO_GAIN_RATE2 0xd4 #define QSERDES_UFS_V6_RX_VGA_CAL_MAN_VAL 0x178 #define QSERDES_UFS_V6_RX_MODE_RATE_0_1_B0 0x208 #define QSERDES_UFS_V6_RX_MODE_RATE_0_1_B1 0x20c diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-ufs.c b/drivers/phy/qualcomm/phy-qcom-qmp-ufs.c index 3927eba..ad91f92 100644 --- a/drivers/phy/qualcomm/phy-qcom-qmp-ufs.c +++ b/drivers/phy/qualcomm/phy-qcom-qmp-ufs.c @@ -658,22 +658,26 @@ static const struct qmp_phy_init_tbl sm8550_ufsphy_serdes[] = { QMP_PHY_INIT_CFG(QSERDES_V6_COM_PLL_CCTRL_MODE0, 0x14), QMP_PHY_INIT_CFG(QSERDES_V6_COM_LOCK_CMP1_MODE0, 0x7f), QMP_PHY_INIT_CFG(QSERDES_V6_COM_LOCK_CMP2_MODE0, 0x06), - QMP_PHY_INIT_CFG(QSERDES_V6_COM_DEC_START_MODE0, 0x4c), - QMP_PHY_INIT_CFG(QSERDES_V6_COM_CP_CTRL_MODE0, 0x0a), - QMP_PHY_INIT_CFG(QSERDES_V6_COM_PLL_RCTRL_MODE0, 0x18), - QMP_PHY_INIT_CFG(QSERDES_V6_COM_PLL_CCTRL_MODE0, 0x14), - QMP_PHY_INIT_CFG(QSERDES_V6_COM_LOCK_CMP1_MODE0, 0x99), - QMP_PHY_INIT_CFG(QSERDES_V6_COM_LOCK_CMP2_MODE0, 0x07), + QMP_PHY_INIT_CFG(QSERDES_V6_COM_DEC_START_MODE1, 0x4c), + QMP_PHY_INIT_CFG(QSERDES_V6_COM_CP_CTRL_MODE1, 0x0a), + QMP_PHY_INIT_CFG(QSERDES_V6_COM_PLL_RCTRL_MODE1, 0x18), + QMP_PHY_INIT_CFG(QSERDES_V6_COM_PLL_CCTRL_MODE1, 0x14), + QMP_PHY_INIT_CFG(QSERDES_V6_COM_LOCK_CMP1_MODE1, 0x99), + QMP_PHY_INIT_CFG(QSERDES_V6_COM_LOCK_CMP2_MODE1, 0x07), +}; + +static const struct qmp_phy_init_tbl sm8550_ufsphy_hs_b_serdes[] = { + QMP_PHY_INIT_CFG(QSERDES_V6_COM_VCO_TUNE_MAP, 0x44), }; static const struct qmp_phy_init_tbl sm8550_ufsphy_tx[] = { - QMP_PHY_INIT_CFG(QSERDES_V6_TX_LANE_MODE_1, 0x05), + QMP_PHY_INIT_CFG(QSERDES_UFS_V6_TX_LANE_MODE_1, 0x05), QMP_PHY_INIT_CFG(QSERDES_UFS_V6_TX_RES_CODE_LANE_OFFSET_TX, 0x07), + QMP_PHY_INIT_CFG(QSERDES_UFS_V6_TX_FR_DCC_CTRL, 0x4c), }; static const struct qmp_phy_init_tbl sm8550_ufsphy_rx[] = { - QMP_PHY_INIT_CFG(QSERDES_UFS_V6_RX_UCDR_FASTLOCK_FO_GAIN_RATE2, 0x0c), - QMP_PHY_INIT_CFG(QSERDES_UFS_V6_RX_UCDR_FASTLOCK_FO_GAIN_RATE4, 0x0f), + QMP_PHY_INIT_CFG(QSERDES_UFS_V6_RX_UCDR_FO_GAIN_RATE2, 0x0c), QMP_PHY_INIT_CFG(QSERDES_UFS_V6_RX_VGA_CAL_MAN_VAL, 0x0e), QMP_PHY_INIT_CFG(QSERDES_UFS_V6_RX_MODE_RATE_0_1_B0, 0xc2), @@ -696,6 +700,8 @@ static const struct qmp_phy_init_tbl sm8550_ufsphy_pcs[] = { QMP_PHY_INIT_CFG(QPHY_V6_PCS_UFS_TX_MID_TERM_CTRL1, 0x43), QMP_PHY_INIT_CFG(QPHY_V6_PCS_UFS_PLL_CNTL, 0x2b), QMP_PHY_INIT_CFG(QPHY_V6_PCS_UFS_MULTI_LANE_CTRL1, 0x02), + QMP_PHY_INIT_CFG(QPHY_V6_PCS_UFS_TX_HSGEAR_CAPABILITY, 0x04), + QMP_PHY_INIT_CFG(QPHY_V6_PCS_UFS_RX_HSGEAR_CAPABILITY, 0x04), }; struct qmp_ufs_offsets { @@ -1157,6 +1163,10 @@ static const struct qmp_phy_cfg sm8550_ufsphy_cfg = { .pcs = sm8550_ufsphy_pcs, .pcs_num = ARRAY_SIZE(sm8550_ufsphy_pcs), }, + .tbls_hs_b = { + .serdes = sm8550_ufsphy_hs_b_serdes, + .serdes_num = ARRAY_SIZE(sm8550_ufsphy_hs_b_serdes), + }, .clk_list = sdm845_ufs_phy_clk_l, .num_clks = ARRAY_SIZE(sdm845_ufs_phy_clk_l), .vreg_list = qmp_phy_vreg_l, From patchwork Mon Dec 25 02:51:41 2023 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Can Guo X-Patchwork-Id: 13504451 Received: from mx0b-0031df01.pphosted.com (mx0b-0031df01.pphosted.com [205.220.180.131]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.subspace.kernel.org (Postfix) with ESMTPS id 3E0DD15B0; Mon, 25 Dec 2023 02:52:38 +0000 (UTC) Authentication-Results: smtp.subspace.kernel.org; dmarc=pass (p=none dis=none) header.from=quicinc.com Authentication-Results: smtp.subspace.kernel.org; spf=pass smtp.mailfrom=qualcomm.com Authentication-Results: smtp.subspace.kernel.org; dkim=pass (2048-bit key) header.d=quicinc.com header.i=@quicinc.com header.b="UIVJpGjZ" Received: from pps.filterd (m0279869.ppops.net [127.0.0.1]) by mx0a-0031df01.pphosted.com (8.17.1.24/8.17.1.24) with ESMTP id 3BP28xpJ003115; Mon, 25 Dec 2023 02:51:54 GMT DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=quicinc.com; h= from:to:cc:subject:date:message-id:in-reply-to:references; s= qcppdkim1; bh=2omVTv1rfymlKqA6DKWav0g4HpgoaB6mHxCE8hwH+3o=; b=UI VJpGjZsVm1yRpfG6eJGxVFSrv9vA6B9Gf1dA8bsgCV+Z0eEuSJ3EnKv0YBRztll5 Gw7sJINDwHGGeo6J3HQHyglc0ZBQqpmwaMRdIKieLWdZyB69FwAAXbe3frLylWmq LyR5TOXc2pkQNwHxw33X04J0VfqI6j8bAjlxJrx6NVHcKjUAuZG7mmnmglGncVuz /MrE6sImtVgrAWM3XMbEK+ebjPRfExE4BuD6jLfS//N+5dex9dV8bFPskNkX2YOo +/ecuveZeGMb5pczdZLYlMKU3nHss82IAbnC/iJDjBGC5IkOLe5auMvjCFE/5q15 Aw5SytQMji3nFvQHrpLg== Received: from nasanppmta02.qualcomm.com (i-global254.qualcomm.com [199.106.103.254]) by mx0a-0031df01.pphosted.com (PPS) with ESMTPS id 3v5pjbjuw6-1 (version=TLSv1.2 cipher=ECDHE-RSA-AES256-GCM-SHA384 bits=256 verify=NOT); Mon, 25 Dec 2023 02:51:53 +0000 (GMT) Received: from pps.filterd (NASANPPMTA02.qualcomm.com [127.0.0.1]) by NASANPPMTA02.qualcomm.com (8.17.1.5/8.17.1.5) with ESMTP id 3BP2pqsG030012; Mon, 25 Dec 2023 02:51:52 GMT Received: from pps.reinject (localhost [127.0.0.1]) by NASANPPMTA02.qualcomm.com (PPS) with ESMTP id 3v5rmmrtfw-1; Mon, 25 Dec 2023 02:51:52 +0000 Received: from NASANPPMTA02.qualcomm.com (NASANPPMTA02.qualcomm.com [127.0.0.1]) by pps.reinject (8.17.1.5/8.17.1.5) with ESMTP id 3BP2pqQP029994; Mon, 25 Dec 2023 02:51:52 GMT Received: from stor-dylan.qualcomm.com (stor-dylan.qualcomm.com [192.168.140.207]) by NASANPPMTA02.qualcomm.com (PPS) with ESMTP id 3BP2pqIt029990; Mon, 25 Dec 2023 02:51:52 +0000 Received: by stor-dylan.qualcomm.com (Postfix, from userid 359480) id CDBA020A8A; Sun, 24 Dec 2023 18:51:51 -0800 (PST) From: Can Guo To: quic_cang@quicinc.com, bvanassche@acm.org, mani@kernel.org, vkoul@kernel.org, abel.vesa@linaro.org, dmitry.baryshkov@linaro.org, neil.armstrong@linaro.org Cc: Andy Gross , Bjorn Andersson , Konrad Dybcio , Kishon Vijay Abraham I , linux-arm-msm@vger.kernel.org (open list:ARM/QUALCOMM SUPPORT), linux-phy@lists.infradead.org (open list:GENERIC PHY FRAMEWORK), linux-kernel@vger.kernel.org (open list) Subject: [PATCH v9 2/2] phy: qualcomm: phy-qcom-qmp-ufs: Add High Speed Gear 5 support for SM8550 Date: Sun, 24 Dec 2023 18:51:41 -0800 Message-Id: <1703472701-34197-3-git-send-email-quic_cang@quicinc.com> X-Mailer: git-send-email 2.7.4 In-Reply-To: <1703472701-34197-1-git-send-email-quic_cang@quicinc.com> References: <1703472701-34197-1-git-send-email-quic_cang@quicinc.com> X-QCInternal: smtphost X-QCInternal: smtphost X-Proofpoint-Virus-Version: vendor=nai engine=6200 definitions=5800 signatures=585085 X-Proofpoint-Virus-Version: vendor=nai engine=6200 definitions=5800 signatures=585085 X-Proofpoint-GUID: xcaOvUpjDb06a8A9JNtTXwizDH6Bj3A7 X-Proofpoint-ORIG-GUID: xcaOvUpjDb06a8A9JNtTXwizDH6Bj3A7 X-Proofpoint-Virus-Version: vendor=baseguard engine=ICAP:2.0.272,Aquarius:18.0.997,Hydra:6.0.619,FMLib:17.11.176.26 definitions=2023-12-09_02,2023-12-07_01,2023-05-22_02 X-Proofpoint-Spam-Details: rule=outbound_notspam policy=outbound score=0 priorityscore=1501 suspectscore=0 impostorscore=0 adultscore=0 malwarescore=0 spamscore=0 bulkscore=0 mlxlogscore=999 mlxscore=0 phishscore=0 lowpriorityscore=0 clxscore=1015 classifier=spam adjust=0 reason=mlx scancount=1 engine=8.19.0-2311290000 definitions=main-2312250017 Precedence: bulk X-Mailing-List: linux-arm-msm@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: On SM8550, two sets of UFS PHY settings are provided, one set is to support HS-G5, another set is to support HS-G4 and lower gears. The two sets of PHY settings are programming different values to different registers, mixing the two sets and/or overwriting one set with another set is definitely not blessed by UFS PHY designers. To add HS-G5 support for SM8550, split the two sets of PHY settings into their dedicated overlay tables, only the common parts of the two sets of PHY settings are left in the .tbls. Consider we are going to add even higher gear support in future, to avoid adding more tables with different names, rename the .tbls_hs_g4 and make it an array, a size of 2 is enough as of now. In this case, .tbls alone is not a complete set of PHY settings, so either tbls_hs_overlay[0] or tbls_hs_overlay[1] must be applied on top of the .tbls to become a complete set of PHY settings. Reviewed-by: Manivannan Sadhasivam Reviewed-by: Dmitry Baryshkov Signed-off-by: Can Guo --- drivers/phy/qualcomm/phy-qcom-qmp-pcs-ufs-v6.h | 2 + drivers/phy/qualcomm/phy-qcom-qmp-qserdes-com-v6.h | 2 + .../qualcomm/phy-qcom-qmp-qserdes-txrx-ufs-v6.h | 9 ++ drivers/phy/qualcomm/phy-qcom-qmp-ufs.c | 164 ++++++++++++++++++--- 4 files changed, 156 insertions(+), 21 deletions(-) diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-pcs-ufs-v6.h b/drivers/phy/qualcomm/phy-qcom-qmp-pcs-ufs-v6.h index c23d5e4..e563af5 100644 --- a/drivers/phy/qualcomm/phy-qcom-qmp-pcs-ufs-v6.h +++ b/drivers/phy/qualcomm/phy-qcom-qmp-pcs-ufs-v6.h @@ -18,6 +18,7 @@ #define QPHY_V6_PCS_UFS_BIST_FIXED_PAT_CTRL 0x060 #define QPHY_V6_PCS_UFS_TX_HSGEAR_CAPABILITY 0x074 #define QPHY_V6_PCS_UFS_RX_HSGEAR_CAPABILITY 0x0bc +#define QPHY_V6_PCS_UFS_RX_HS_G5_SYNC_LENGTH_CAPABILITY 0x12c #define QPHY_V6_PCS_UFS_DEBUG_BUS_CLKSEL 0x158 #define QPHY_V6_PCS_UFS_LINECFG_DISABLE 0x17c #define QPHY_V6_PCS_UFS_RX_MIN_HIBERN8_TIME 0x184 @@ -27,5 +28,6 @@ #define QPHY_V6_PCS_UFS_READY_STATUS 0x1a8 #define QPHY_V6_PCS_UFS_TX_MID_TERM_CTRL1 0x1f4 #define QPHY_V6_PCS_UFS_MULTI_LANE_CTRL1 0x1fc +#define QPHY_V6_PCS_UFS_RX_HSG5_SYNC_WAIT_TIME 0x220 #endif diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-qserdes-com-v6.h b/drivers/phy/qualcomm/phy-qcom-qmp-qserdes-com-v6.h index f420f8f..ef392ce 100644 --- a/drivers/phy/qualcomm/phy-qcom-qmp-qserdes-com-v6.h +++ b/drivers/phy/qualcomm/phy-qcom-qmp-qserdes-com-v6.h @@ -56,6 +56,8 @@ #define QSERDES_V6_COM_SYS_CLK_CTRL 0xe4 #define QSERDES_V6_COM_SYSCLK_BUF_ENABLE 0xe8 #define QSERDES_V6_COM_PLL_IVCO 0xf4 +#define QSERDES_V6_COM_CMN_IETRIM 0xfc +#define QSERDES_V6_COM_CMN_IPTRIM 0x100 #define QSERDES_V6_COM_SYSCLK_EN_SEL 0x110 #define QSERDES_V6_COM_RESETSM_CNTRL 0x118 #define QSERDES_V6_COM_LOCK_CMP_EN 0x120 diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-qserdes-txrx-ufs-v6.h b/drivers/phy/qualcomm/phy-qcom-qmp-qserdes-txrx-ufs-v6.h index 674f158..48f31c8 100644 --- a/drivers/phy/qualcomm/phy-qcom-qmp-qserdes-txrx-ufs-v6.h +++ b/drivers/phy/qualcomm/phy-qcom-qmp-qserdes-txrx-ufs-v6.h @@ -15,8 +15,15 @@ #define QSERDES_UFS_V6_RX_UCDR_FASTLOCK_FO_GAIN_RATE2 0x08 #define QSERDES_UFS_V6_RX_UCDR_FASTLOCK_FO_GAIN_RATE4 0x10 +#define QSERDES_UFS_V6_RX_UCDR_FASTLOCK_SO_GAIN_RATE4 0x24 +#define QSERDES_UFS_V6_RX_UCDR_FASTLOCK_COUNT_HIGH_RATE4 0x54 #define QSERDES_UFS_V6_RX_UCDR_FO_GAIN_RATE2 0xd4 +#define QSERDES_UFS_V6_RX_UCDR_FO_GAIN_RATE4 0xdc +#define QSERDES_UFS_V6_RX_UCDR_SO_GAIN_RATE4 0xf0 +#define QSERDES_UFS_V6_RX_UCDR_PI_CONTROLS 0xf4 #define QSERDES_UFS_V6_RX_VGA_CAL_MAN_VAL 0x178 +#define QSERDES_UFS_V6_RX_EQ_OFFSET_ADAPTOR_CNTRL1 0x1bc +#define QSERDES_UFS_V6_RX_OFFSET_ADAPTOR_CNTRL3 0x1c4 #define QSERDES_UFS_V6_RX_MODE_RATE_0_1_B0 0x208 #define QSERDES_UFS_V6_RX_MODE_RATE_0_1_B1 0x20c #define QSERDES_UFS_V6_RX_MODE_RATE_0_1_B3 0x214 @@ -28,6 +35,8 @@ #define QSERDES_UFS_V6_RX_MODE_RATE3_B5 0x264 #define QSERDES_UFS_V6_RX_MODE_RATE3_B8 0x270 #define QSERDES_UFS_V6_RX_MODE_RATE4_B3 0x280 +#define QSERDES_UFS_V6_RX_MODE_RATE4_B4 0x284 #define QSERDES_UFS_V6_RX_MODE_RATE4_B6 0x28c +#define QSERDES_UFS_V6_RX_DLL0_FTUNE_CTRL 0x2f8 #endif diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-ufs.c b/drivers/phy/qualcomm/phy-qcom-qmp-ufs.c index ad91f92..4252af2 100644 --- a/drivers/phy/qualcomm/phy-qcom-qmp-ufs.c +++ b/drivers/phy/qualcomm/phy-qcom-qmp-ufs.c @@ -41,6 +41,8 @@ #define PHY_INIT_COMPLETE_TIMEOUT 10000 +#define NUM_OVERLAY 2 + struct qmp_phy_init_tbl { unsigned int offset; unsigned int val; @@ -649,15 +651,22 @@ static const struct qmp_phy_init_tbl sm8550_ufsphy_serdes[] = { QMP_PHY_INIT_CFG(QSERDES_V6_COM_HSCLK_SEL_1, 0x11), QMP_PHY_INIT_CFG(QSERDES_V6_COM_HSCLK_HS_SWITCH_SEL_1, 0x00), QMP_PHY_INIT_CFG(QSERDES_V6_COM_LOCK_CMP_EN, 0x01), - QMP_PHY_INIT_CFG(QSERDES_V6_COM_VCO_TUNE_MAP, 0x04), - QMP_PHY_INIT_CFG(QSERDES_V6_COM_PLL_IVCO, 0x0f), QMP_PHY_INIT_CFG(QSERDES_V6_COM_VCO_TUNE_INITVAL2, 0x00), QMP_PHY_INIT_CFG(QSERDES_V6_COM_DEC_START_MODE0, 0x41), - QMP_PHY_INIT_CFG(QSERDES_V6_COM_CP_CTRL_MODE0, 0x0a), QMP_PHY_INIT_CFG(QSERDES_V6_COM_PLL_RCTRL_MODE0, 0x18), QMP_PHY_INIT_CFG(QSERDES_V6_COM_PLL_CCTRL_MODE0, 0x14), QMP_PHY_INIT_CFG(QSERDES_V6_COM_LOCK_CMP1_MODE0, 0x7f), QMP_PHY_INIT_CFG(QSERDES_V6_COM_LOCK_CMP2_MODE0, 0x06), +}; + +static const struct qmp_phy_init_tbl sm8550_ufsphy_hs_b_serdes[] = { + QMP_PHY_INIT_CFG(QSERDES_V6_COM_VCO_TUNE_MAP, 0x44), +}; + +static const struct qmp_phy_init_tbl sm8550_ufsphy_g4_serdes[] = { + QMP_PHY_INIT_CFG(QSERDES_V6_COM_VCO_TUNE_MAP, 0x04), + QMP_PHY_INIT_CFG(QSERDES_V6_COM_PLL_IVCO, 0x0f), + QMP_PHY_INIT_CFG(QSERDES_V6_COM_CP_CTRL_MODE0, 0x0a), QMP_PHY_INIT_CFG(QSERDES_V6_COM_DEC_START_MODE1, 0x4c), QMP_PHY_INIT_CFG(QSERDES_V6_COM_CP_CTRL_MODE1, 0x0a), QMP_PHY_INIT_CFG(QSERDES_V6_COM_PLL_RCTRL_MODE1, 0x18), @@ -666,19 +675,24 @@ static const struct qmp_phy_init_tbl sm8550_ufsphy_serdes[] = { QMP_PHY_INIT_CFG(QSERDES_V6_COM_LOCK_CMP2_MODE1, 0x07), }; -static const struct qmp_phy_init_tbl sm8550_ufsphy_hs_b_serdes[] = { - QMP_PHY_INIT_CFG(QSERDES_V6_COM_VCO_TUNE_MAP, 0x44), +static const struct qmp_phy_init_tbl sm8550_ufsphy_g5_serdes[] = { + QMP_PHY_INIT_CFG(QSERDES_V6_COM_PLL_IVCO, 0x1f), + QMP_PHY_INIT_CFG(QSERDES_V6_COM_CMN_IETRIM, 0x1b), + QMP_PHY_INIT_CFG(QSERDES_V6_COM_CMN_IPTRIM, 0x1c), + QMP_PHY_INIT_CFG(QSERDES_V6_COM_CP_CTRL_MODE0, 0x06), }; static const struct qmp_phy_init_tbl sm8550_ufsphy_tx[] = { QMP_PHY_INIT_CFG(QSERDES_UFS_V6_TX_LANE_MODE_1, 0x05), QMP_PHY_INIT_CFG(QSERDES_UFS_V6_TX_RES_CODE_LANE_OFFSET_TX, 0x07), +}; + +static const struct qmp_phy_init_tbl sm8550_ufsphy_g4_tx[] = { QMP_PHY_INIT_CFG(QSERDES_UFS_V6_TX_FR_DCC_CTRL, 0x4c), }; static const struct qmp_phy_init_tbl sm8550_ufsphy_rx[] = { QMP_PHY_INIT_CFG(QSERDES_UFS_V6_RX_UCDR_FO_GAIN_RATE2, 0x0c), - QMP_PHY_INIT_CFG(QSERDES_UFS_V6_RX_VGA_CAL_MAN_VAL, 0x0e), QMP_PHY_INIT_CFG(QSERDES_UFS_V6_RX_MODE_RATE_0_1_B0, 0xc2), QMP_PHY_INIT_CFG(QSERDES_UFS_V6_RX_MODE_RATE_0_1_B1, 0xc2), @@ -694,16 +708,45 @@ static const struct qmp_phy_init_tbl sm8550_ufsphy_rx[] = { QMP_PHY_INIT_CFG(QSERDES_UFS_V6_RX_MODE_RATE3_B8, 0x02), }; +static const struct qmp_phy_init_tbl sm8550_ufsphy_g4_rx[] = { + QMP_PHY_INIT_CFG(QSERDES_UFS_V6_RX_VGA_CAL_MAN_VAL, 0x0e), +}; + +static const struct qmp_phy_init_tbl sm8550_ufsphy_g5_rx[] = { + QMP_PHY_INIT_CFG(QSERDES_UFS_V6_RX_UCDR_FO_GAIN_RATE4, 0x0c), + QMP_PHY_INIT_CFG(QSERDES_UFS_V6_RX_UCDR_SO_GAIN_RATE4, 0x04), + QMP_PHY_INIT_CFG(QSERDES_UFS_V6_RX_EQ_OFFSET_ADAPTOR_CNTRL1, 0x14), + QMP_PHY_INIT_CFG(QSERDES_UFS_V6_RX_UCDR_PI_CONTROLS, 0x07), + QMP_PHY_INIT_CFG(QSERDES_UFS_V6_RX_OFFSET_ADAPTOR_CNTRL3, 0x0e), + QMP_PHY_INIT_CFG(QSERDES_UFS_V6_RX_UCDR_FASTLOCK_COUNT_HIGH_RATE4, 0x02), + QMP_PHY_INIT_CFG(QSERDES_UFS_V6_RX_UCDR_FASTLOCK_FO_GAIN_RATE4, 0x1c), + QMP_PHY_INIT_CFG(QSERDES_UFS_V6_RX_UCDR_FASTLOCK_SO_GAIN_RATE4, 0x06), + QMP_PHY_INIT_CFG(QSERDES_UFS_V6_RX_VGA_CAL_MAN_VAL, 0x08), + QMP_PHY_INIT_CFG(QSERDES_UFS_V6_RX_MODE_RATE4_B3, 0xb9), + QMP_PHY_INIT_CFG(QSERDES_UFS_V6_RX_MODE_RATE4_B4, 0x4f), + QMP_PHY_INIT_CFG(QSERDES_UFS_V6_RX_MODE_RATE4_B6, 0xff), + QMP_PHY_INIT_CFG(QSERDES_UFS_V6_RX_DLL0_FTUNE_CTRL, 0x30), +}; + static const struct qmp_phy_init_tbl sm8550_ufsphy_pcs[] = { QMP_PHY_INIT_CFG(QPHY_V6_PCS_UFS_RX_SIGDET_CTRL2, 0x69), QMP_PHY_INIT_CFG(QPHY_V6_PCS_UFS_TX_LARGE_AMP_DRV_LVL, 0x0f), QMP_PHY_INIT_CFG(QPHY_V6_PCS_UFS_TX_MID_TERM_CTRL1, 0x43), - QMP_PHY_INIT_CFG(QPHY_V6_PCS_UFS_PLL_CNTL, 0x2b), QMP_PHY_INIT_CFG(QPHY_V6_PCS_UFS_MULTI_LANE_CTRL1, 0x02), +}; + +static const struct qmp_phy_init_tbl sm8550_ufsphy_g4_pcs[] = { + QMP_PHY_INIT_CFG(QPHY_V6_PCS_UFS_PLL_CNTL, 0x2b), QMP_PHY_INIT_CFG(QPHY_V6_PCS_UFS_TX_HSGEAR_CAPABILITY, 0x04), QMP_PHY_INIT_CFG(QPHY_V6_PCS_UFS_RX_HSGEAR_CAPABILITY, 0x04), }; +static const struct qmp_phy_init_tbl sm8550_ufsphy_g5_pcs[] = { + QMP_PHY_INIT_CFG(QPHY_V6_PCS_UFS_PLL_CNTL, 0x33), + QMP_PHY_INIT_CFG(QPHY_V6_PCS_UFS_RX_HS_G5_SYNC_LENGTH_CAPABILITY, 0x4f), + QMP_PHY_INIT_CFG(QPHY_V6_PCS_UFS_RX_HSG5_SYNC_WAIT_TIME, 0x9e), +}; + struct qmp_ufs_offsets { u16 serdes; u16 pcs; @@ -723,6 +766,8 @@ struct qmp_phy_cfg_tbls { int rx_num; const struct qmp_phy_init_tbl *pcs; int pcs_num; + /* Maximum supported Gear of this tbls */ + u32 max_gear; }; /* struct qmp_phy_cfg - per-PHY initialization config */ @@ -730,13 +775,15 @@ struct qmp_phy_cfg { int lanes; const struct qmp_ufs_offsets *offsets; + /* Maximum supported Gear of this config */ + u32 max_supported_gear; /* Main init sequence for PHY blocks - serdes, tx, rx, pcs */ const struct qmp_phy_cfg_tbls tbls; /* Additional sequence for HS Series B */ const struct qmp_phy_cfg_tbls tbls_hs_b; - /* Additional sequence for HS G4 */ - const struct qmp_phy_cfg_tbls tbls_hs_g4; + /* Additional sequence for different HS Gears */ + const struct qmp_phy_cfg_tbls tbls_hs_overlay[NUM_OVERLAY]; /* clock ids to be requested */ const char * const *clk_list; @@ -839,6 +886,7 @@ static const struct qmp_phy_cfg msm8996_ufsphy_cfg = { .lanes = 1, .offsets = &qmp_ufs_offsets, + .max_supported_gear = UFS_HS_G3, .tbls = { .serdes = msm8996_ufsphy_serdes, @@ -864,6 +912,7 @@ static const struct qmp_phy_cfg sa8775p_ufsphy_cfg = { .lanes = 2, .offsets = &qmp_ufs_offsets, + .max_supported_gear = UFS_HS_G4, .tbls = { .serdes = sm8350_ufsphy_serdes, @@ -879,13 +928,14 @@ static const struct qmp_phy_cfg sa8775p_ufsphy_cfg = { .serdes = sm8350_ufsphy_hs_b_serdes, .serdes_num = ARRAY_SIZE(sm8350_ufsphy_hs_b_serdes), }, - .tbls_hs_g4 = { + .tbls_hs_overlay[0] = { .tx = sm8350_ufsphy_g4_tx, .tx_num = ARRAY_SIZE(sm8350_ufsphy_g4_tx), .rx = sm8350_ufsphy_g4_rx, .rx_num = ARRAY_SIZE(sm8350_ufsphy_g4_rx), .pcs = sm8350_ufsphy_g4_pcs, .pcs_num = ARRAY_SIZE(sm8350_ufsphy_g4_pcs), + .max_gear = UFS_HS_G4, }, .clk_list = sm8450_ufs_phy_clk_l, .num_clks = ARRAY_SIZE(sm8450_ufs_phy_clk_l), @@ -898,6 +948,7 @@ static const struct qmp_phy_cfg sc8280xp_ufsphy_cfg = { .lanes = 2, .offsets = &qmp_ufs_offsets, + .max_supported_gear = UFS_HS_G4, .tbls = { .serdes = sm8350_ufsphy_serdes, @@ -913,13 +964,14 @@ static const struct qmp_phy_cfg sc8280xp_ufsphy_cfg = { .serdes = sm8350_ufsphy_hs_b_serdes, .serdes_num = ARRAY_SIZE(sm8350_ufsphy_hs_b_serdes), }, - .tbls_hs_g4 = { + .tbls_hs_overlay[0] = { .tx = sm8350_ufsphy_g4_tx, .tx_num = ARRAY_SIZE(sm8350_ufsphy_g4_tx), .rx = sm8350_ufsphy_g4_rx, .rx_num = ARRAY_SIZE(sm8350_ufsphy_g4_rx), .pcs = sm8350_ufsphy_g4_pcs, .pcs_num = ARRAY_SIZE(sm8350_ufsphy_g4_pcs), + .max_gear = UFS_HS_G4, }, .clk_list = sdm845_ufs_phy_clk_l, .num_clks = ARRAY_SIZE(sdm845_ufs_phy_clk_l), @@ -932,6 +984,7 @@ static const struct qmp_phy_cfg sdm845_ufsphy_cfg = { .lanes = 2, .offsets = &qmp_ufs_offsets, + .max_supported_gear = UFS_HS_G3, .tbls = { .serdes = sdm845_ufsphy_serdes, @@ -960,6 +1013,7 @@ static const struct qmp_phy_cfg sm6115_ufsphy_cfg = { .lanes = 1, .offsets = &qmp_ufs_offsets, + .max_supported_gear = UFS_HS_G3, .tbls = { .serdes = sm6115_ufsphy_serdes, @@ -988,6 +1042,7 @@ static const struct qmp_phy_cfg sm7150_ufsphy_cfg = { .lanes = 1, .offsets = &qmp_ufs_offsets, + .max_supported_gear = UFS_HS_G3, .tbls = { .serdes = sdm845_ufsphy_serdes, @@ -1016,6 +1071,7 @@ static const struct qmp_phy_cfg sm8150_ufsphy_cfg = { .lanes = 2, .offsets = &qmp_ufs_offsets, + .max_supported_gear = UFS_HS_G4, .tbls = { .serdes = sm8150_ufsphy_serdes, @@ -1031,13 +1087,14 @@ static const struct qmp_phy_cfg sm8150_ufsphy_cfg = { .serdes = sm8150_ufsphy_hs_b_serdes, .serdes_num = ARRAY_SIZE(sm8150_ufsphy_hs_b_serdes), }, - .tbls_hs_g4 = { + .tbls_hs_overlay[0] = { .tx = sm8150_ufsphy_hs_g4_tx, .tx_num = ARRAY_SIZE(sm8150_ufsphy_hs_g4_tx), .rx = sm8150_ufsphy_hs_g4_rx, .rx_num = ARRAY_SIZE(sm8150_ufsphy_hs_g4_rx), .pcs = sm8150_ufsphy_hs_g4_pcs, .pcs_num = ARRAY_SIZE(sm8150_ufsphy_hs_g4_pcs), + .max_gear = UFS_HS_G4, }, .clk_list = sdm845_ufs_phy_clk_l, .num_clks = ARRAY_SIZE(sdm845_ufs_phy_clk_l), @@ -1050,6 +1107,7 @@ static const struct qmp_phy_cfg sm8250_ufsphy_cfg = { .lanes = 2, .offsets = &qmp_ufs_offsets, + .max_supported_gear = UFS_HS_G4, .tbls = { .serdes = sm8150_ufsphy_serdes, @@ -1065,13 +1123,14 @@ static const struct qmp_phy_cfg sm8250_ufsphy_cfg = { .serdes = sm8150_ufsphy_hs_b_serdes, .serdes_num = ARRAY_SIZE(sm8150_ufsphy_hs_b_serdes), }, - .tbls_hs_g4 = { + .tbls_hs_overlay[0] = { .tx = sm8250_ufsphy_hs_g4_tx, .tx_num = ARRAY_SIZE(sm8250_ufsphy_hs_g4_tx), .rx = sm8250_ufsphy_hs_g4_rx, .rx_num = ARRAY_SIZE(sm8250_ufsphy_hs_g4_rx), .pcs = sm8150_ufsphy_hs_g4_pcs, .pcs_num = ARRAY_SIZE(sm8150_ufsphy_hs_g4_pcs), + .max_gear = UFS_HS_G4, }, .clk_list = sdm845_ufs_phy_clk_l, .num_clks = ARRAY_SIZE(sdm845_ufs_phy_clk_l), @@ -1084,6 +1143,7 @@ static const struct qmp_phy_cfg sm8350_ufsphy_cfg = { .lanes = 2, .offsets = &qmp_ufs_offsets, + .max_supported_gear = UFS_HS_G4, .tbls = { .serdes = sm8350_ufsphy_serdes, @@ -1099,13 +1159,14 @@ static const struct qmp_phy_cfg sm8350_ufsphy_cfg = { .serdes = sm8350_ufsphy_hs_b_serdes, .serdes_num = ARRAY_SIZE(sm8350_ufsphy_hs_b_serdes), }, - .tbls_hs_g4 = { + .tbls_hs_overlay[0] = { .tx = sm8350_ufsphy_g4_tx, .tx_num = ARRAY_SIZE(sm8350_ufsphy_g4_tx), .rx = sm8350_ufsphy_g4_rx, .rx_num = ARRAY_SIZE(sm8350_ufsphy_g4_rx), .pcs = sm8350_ufsphy_g4_pcs, .pcs_num = ARRAY_SIZE(sm8350_ufsphy_g4_pcs), + .max_gear = UFS_HS_G4, }, .clk_list = sdm845_ufs_phy_clk_l, .num_clks = ARRAY_SIZE(sdm845_ufs_phy_clk_l), @@ -1118,6 +1179,7 @@ static const struct qmp_phy_cfg sm8450_ufsphy_cfg = { .lanes = 2, .offsets = &qmp_ufs_offsets, + .max_supported_gear = UFS_HS_G4, .tbls = { .serdes = sm8350_ufsphy_serdes, @@ -1133,13 +1195,14 @@ static const struct qmp_phy_cfg sm8450_ufsphy_cfg = { .serdes = sm8350_ufsphy_hs_b_serdes, .serdes_num = ARRAY_SIZE(sm8350_ufsphy_hs_b_serdes), }, - .tbls_hs_g4 = { + .tbls_hs_overlay[0] = { .tx = sm8350_ufsphy_g4_tx, .tx_num = ARRAY_SIZE(sm8350_ufsphy_g4_tx), .rx = sm8350_ufsphy_g4_rx, .rx_num = ARRAY_SIZE(sm8350_ufsphy_g4_rx), .pcs = sm8350_ufsphy_g4_pcs, .pcs_num = ARRAY_SIZE(sm8350_ufsphy_g4_pcs), + .max_gear = UFS_HS_G4, }, .clk_list = sm8450_ufs_phy_clk_l, .num_clks = ARRAY_SIZE(sm8450_ufs_phy_clk_l), @@ -1152,6 +1215,7 @@ static const struct qmp_phy_cfg sm8550_ufsphy_cfg = { .lanes = 2, .offsets = &qmp_ufs_offsets_v6, + .max_supported_gear = UFS_HS_G5, .tbls = { .serdes = sm8550_ufsphy_serdes, @@ -1167,6 +1231,26 @@ static const struct qmp_phy_cfg sm8550_ufsphy_cfg = { .serdes = sm8550_ufsphy_hs_b_serdes, .serdes_num = ARRAY_SIZE(sm8550_ufsphy_hs_b_serdes), }, + .tbls_hs_overlay[0] = { + .serdes = sm8550_ufsphy_g4_serdes, + .serdes_num = ARRAY_SIZE(sm8550_ufsphy_g4_serdes), + .tx = sm8550_ufsphy_g4_tx, + .tx_num = ARRAY_SIZE(sm8550_ufsphy_g4_tx), + .rx = sm8550_ufsphy_g4_rx, + .rx_num = ARRAY_SIZE(sm8550_ufsphy_g4_rx), + .pcs = sm8550_ufsphy_g4_pcs, + .pcs_num = ARRAY_SIZE(sm8550_ufsphy_g4_pcs), + .max_gear = UFS_HS_G4, + }, + .tbls_hs_overlay[1] = { + .serdes = sm8550_ufsphy_g5_serdes, + .serdes_num = ARRAY_SIZE(sm8550_ufsphy_g5_serdes), + .rx = sm8550_ufsphy_g5_rx, + .rx_num = ARRAY_SIZE(sm8550_ufsphy_g5_rx), + .pcs = sm8550_ufsphy_g5_pcs, + .pcs_num = ARRAY_SIZE(sm8550_ufsphy_g5_pcs), + .max_gear = UFS_HS_G5, + }, .clk_list = sdm845_ufs_phy_clk_l, .num_clks = ARRAY_SIZE(sdm845_ufs_phy_clk_l), .vreg_list = qmp_phy_vreg_l, @@ -1229,17 +1313,49 @@ static void qmp_ufs_pcs_init(struct qmp_ufs *qmp, const struct qmp_phy_cfg_tbls qmp_ufs_configure(pcs, tbls->pcs, tbls->pcs_num); } +static int qmp_ufs_get_gear_overlay(struct qmp_ufs *qmp, const struct qmp_phy_cfg *cfg) +{ + u32 max_gear, floor_max_gear = cfg->max_supported_gear; + int idx, ret = -EINVAL; + + for (idx = NUM_OVERLAY - 1; idx >= 0; idx--) { + max_gear = cfg->tbls_hs_overlay[idx].max_gear; + + /* Skip if the table is not available */ + if (max_gear == 0) + continue; + + /* Direct matching, bail */ + if (qmp->submode == max_gear) + return idx; + + /* If no direct matching, the lowest gear is the best matching */ + if (max_gear < floor_max_gear) { + ret = idx; + floor_max_gear = max_gear; + } + } + + return ret; +} + static void qmp_ufs_init_registers(struct qmp_ufs *qmp, const struct qmp_phy_cfg *cfg) { + int i; + qmp_ufs_serdes_init(qmp, &cfg->tbls); - if (qmp->mode == PHY_MODE_UFS_HS_B) - qmp_ufs_serdes_init(qmp, &cfg->tbls_hs_b); qmp_ufs_lanes_init(qmp, &cfg->tbls); - if (qmp->submode == UFS_HS_G4) - qmp_ufs_lanes_init(qmp, &cfg->tbls_hs_g4); qmp_ufs_pcs_init(qmp, &cfg->tbls); - if (qmp->submode == UFS_HS_G4) - qmp_ufs_pcs_init(qmp, &cfg->tbls_hs_g4); + + i = qmp_ufs_get_gear_overlay(qmp, cfg); + if (i >= 0) { + qmp_ufs_serdes_init(qmp, &cfg->tbls_hs_overlay[i]); + qmp_ufs_lanes_init(qmp, &cfg->tbls_hs_overlay[i]); + qmp_ufs_pcs_init(qmp, &cfg->tbls_hs_overlay[i]); + } + + if (qmp->mode == PHY_MODE_UFS_HS_B) + qmp_ufs_serdes_init(qmp, &cfg->tbls_hs_b); } static int qmp_ufs_com_init(struct qmp_ufs *qmp) @@ -1411,6 +1527,12 @@ static int qmp_ufs_disable(struct phy *phy) static int qmp_ufs_set_mode(struct phy *phy, enum phy_mode mode, int submode) { struct qmp_ufs *qmp = phy_get_drvdata(phy); + const struct qmp_phy_cfg *cfg = qmp->cfg; + + if (submode > cfg->max_supported_gear || submode == 0) { + dev_err(qmp->dev, "Invalid PHY submode %d\n", submode); + return -EINVAL; + } qmp->mode = mode; qmp->submode = submode;