From patchwork Thu Jan 25 15:30:53 2024 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 8bit X-Patchwork-Submitter: =?utf-8?q?Duje_Mihanovi=C4=87?= X-Patchwork-Id: 13531114 Received: from mx.skole.hr (mx1.hosting.skole.hr [161.53.165.185]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.subspace.kernel.org (Postfix) with ESMTPS id F0ED87316F; Thu, 25 Jan 2024 15:32:03 +0000 (UTC) Authentication-Results: smtp.subspace.kernel.org; arc=none smtp.client-ip=161.53.165.185 ARC-Seal: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1706196727; cv=none; b=eLOdyQysV9hgGE4aWPG8AKXeNg4cvMi0h63ksgajK0CTkwluAbdDYBw8r/JDRIKW5XM36wMt+EiL0hx6K0wXbj8rF+YgHH9LkB+qZqZUfpOmCUSMvYUtVYlhR6o38DMKkpBRGKUeRhWEDb93wf8B/ZjNn4DbUOuNToSVnM7hp3w= ARC-Message-Signature: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1706196727; c=relaxed/simple; bh=EmBtZVpm+2jJo0+oBnQB1a+nHfZMWJwr8ePwkRQqIvM=; h=From:Date:Subject:MIME-Version:Content-Type:Message-Id:References: In-Reply-To:To:Cc; b=BWNBwtZ7mgALgCU/d+CF06PvlvuQ1gFFfHTbHNtMO7YBYgvnm9BK/jqKV/54eKtuuMiqNte4/keh96tQMyxsttk5iFVOU3DUvY4O3YOtotOGevZZ4bxpgfSRSSYC3YQI/guiQh36NRIEg69py3stCb3tExrP++82vjXjgyHQTKU= ARC-Authentication-Results: i=1; smtp.subspace.kernel.org; dmarc=none (p=none dis=none) header.from=skole.hr; spf=pass smtp.mailfrom=skole.hr; arc=none smtp.client-ip=161.53.165.185 Authentication-Results: smtp.subspace.kernel.org; dmarc=none (p=none dis=none) header.from=skole.hr Authentication-Results: smtp.subspace.kernel.org; spf=pass smtp.mailfrom=skole.hr Received: from mx1.hosting.skole.hr (localhost.localdomain [127.0.0.1]) by mx.skole.hr (mx.skole.hr) with ESMTP id 104DF84F6E; Thu, 25 Jan 2024 16:31:56 +0100 (CET) From: =?utf-8?q?Duje_Mihanovi=C4=87?= Date: Thu, 25 Jan 2024 16:30:53 +0100 Subject: [PATCH v5 1/4] leds: introduce ExpressWire library Precedence: bulk X-Mailing-List: linux-fbdev@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 Message-Id: <20240125-ktd2801-v5-1-e22da232a825@skole.hr> References: <20240125-ktd2801-v5-0-e22da232a825@skole.hr> In-Reply-To: <20240125-ktd2801-v5-0-e22da232a825@skole.hr> To: Lee Jones , Daniel Thompson , Jingoo Han , Pavel Machek , Rob Herring , Krzysztof Kozlowski , Conor Dooley , Helge Deller , Linus Walleij Cc: Karel Balej , ~postmarketos/upstreaming@lists.sr.ht, phone-devel@vger.kernel.org, dri-devel@lists.freedesktop.org, linux-leds@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-fbdev@vger.kernel.org, =?utf-8?q?Duje_?= =?utf-8?q?Mihanovi=C4=87?= X-Mailer: b4 0.12.4 X-Developer-Signature: v=1; a=openpgp-sha256; l=6456; i=duje.mihanovic@skole.hr; h=from:subject:message-id; bh=EmBtZVpm+2jJo0+oBnQB1a+nHfZMWJwr8ePwkRQqIvM=; b=owEBbQKS/ZANAwAIAZoRnrBCLZbhAcsmYgBlsn7DfN3tI6caY5seGs5+QL9PGrkwNvXOL0Sue VbwtyVxGSWJAjMEAAEIAB0WIQRT351NnD/hEPs2LXiaEZ6wQi2W4QUCZbJ+wwAKCRCaEZ6wQi2W 4b2uEACQ+Al72XGNOC52NpzDW/JVVVe3UODtl272aLQfQSnnX3AHgIj34cZBt1PFFquUnRAJnDr itqposRDO5747+OdD4dCDEObOrr4EjJvtr1tLnAzo+2OaT6L4HVLWSnTY6GgWrdHx5fUK2JHV9U gMmNQeycJoPwo/7kY7WtGzlJJrTDldS9UtL9V5LnWG5cXsN9ZNb5suFyvEYj7nrHJTqVXg2djRs qd7m/1/fxkpJPV1qm2YUeYlTp4e/ZPVshYwtSHEWzrrAqsKIt5nDCsNivPN4JX094i6rTqdumZu 7W874oq0MuNJ0bGQnoL067KGbkwoqfyo0XwgawcZHNp8ibEM/yoCvBpiTMzhCR1CP6fQoGWKPLT t0JGjAW/17synjXDVXXAv4VCZMCqmUgL58Rgo1q8ChRQWM2yTkHskjuLh84nwoc2DhMP059IO68 1j2lM2i5wbMBvYxM4ZoCXS37vR7CUdMODqHLGTVuUGnaxeDl4CPiLRvaT9aPjErAoeTq190NQCz kHNP51PxX/ozV+ouyR7muDWwzHpEnLyFIZ0xtWVkyhOb1korptaga37qUphyBtrjF3GYeH1NLJE 9YSEG0TPxhy1/BI9dFvQ4ZMem1nLdsSphyozRy4VKUdAkU23tEaPWMA4D6Hfvdx+Kpco6QbBACo D2tfRksekaUFlHQ== X-Developer-Key: i=duje.mihanovic@skole.hr; a=openpgp; fpr=53DF9D4D9C3FE110FB362D789A119EB0422D96E1 The ExpressWire protocol is shared between at least KTD2692 and KTD2801 with slight differences such as timings and the former not having a defined set of pulses for enabling the protocol (possibly because it does not support PWM unlike KTD2801). Despite these differences the ExpressWire handling code can be shared between the two, so in preparation for adding KTD2801 support introduce a library implementing this protocol. Suggested-by: Daniel Thompson Reviewed-by: Linus Walleij Reviewed-by: Daniel Thompson Signed-off-by: Duje Mihanović --- MAINTAINERS | 7 +++++ drivers/leds/Kconfig | 4 +++ drivers/leds/Makefile | 3 ++ drivers/leds/leds-expresswire.c | 68 ++++++++++++++++++++++++++++++++++++++++ include/linux/leds-expresswire.h | 36 +++++++++++++++++++++ 5 files changed, 118 insertions(+) diff --git a/MAINTAINERS b/MAINTAINERS index 8d1052fa6a69..e1c83e0e837a 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -7979,6 +7979,13 @@ S: Maintained T: git git://git.kernel.org/pub/scm/linux/kernel/git/linkinjeon/exfat.git F: fs/exfat/ +EXPRESSWIRE PROTOCOL LIBRARY +M: Duje Mihanović +L: linux-leds@vger.kernel.org +S: Maintained +F: drivers/leds/leds-expresswire.c +F: include/linux/leds-expresswire.h + EXT2 FILE SYSTEM M: Jan Kara L: linux-ext4@vger.kernel.org diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig index d721b254e1e4..64bb2de237e9 100644 --- a/drivers/leds/Kconfig +++ b/drivers/leds/Kconfig @@ -186,6 +186,10 @@ config LEDS_EL15203000 To compile this driver as a module, choose M here: the module will be called leds-el15203000. +config LEDS_EXPRESSWIRE + bool + depends on GPIOLIB + config LEDS_TURRIS_OMNIA tristate "LED support for CZ.NIC's Turris Omnia" depends on LEDS_CLASS_MULTICOLOR diff --git a/drivers/leds/Makefile b/drivers/leds/Makefile index ce07dc295ff0..effdfc6f1e95 100644 --- a/drivers/leds/Makefile +++ b/drivers/leds/Makefile @@ -91,6 +91,9 @@ obj-$(CONFIG_LEDS_WM831X_STATUS) += leds-wm831x-status.o obj-$(CONFIG_LEDS_WM8350) += leds-wm8350.o obj-$(CONFIG_LEDS_WRAP) += leds-wrap.o +# Kinetic ExpressWire Protocol +obj-$(CONFIG_LEDS_EXPRESSWIRE) += leds-expresswire.o + # LED SPI Drivers obj-$(CONFIG_LEDS_CR0014114) += leds-cr0014114.o obj-$(CONFIG_LEDS_DAC124S085) += leds-dac124s085.o diff --git a/drivers/leds/leds-expresswire.c b/drivers/leds/leds-expresswire.c new file mode 100644 index 000000000000..89e147b0e019 --- /dev/null +++ b/drivers/leds/leds-expresswire.c @@ -0,0 +1,68 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Shared library for Kinetic's ExpressWire protocol. + * This protocol works by pulsing the ExpressWire IC's control GPIO. + * ktd2692 and ktd2801 are known to use this protocol. + */ + +#include +#include +#include + +void expresswire_power_off(struct expresswire_common_props *props) +{ + gpiod_set_value_cansleep(props->ctrl_gpio, 0); + usleep_range(props->timing.poweroff_us, props->timing.poweroff_us * 2); +} +EXPORT_SYMBOL_NS_GPL(expresswire_power_off, EXPRESSWIRE); + +void expresswire_enable(struct expresswire_common_props *props) +{ + gpiod_set_value(props->ctrl_gpio, 1); + udelay(props->timing.detect_delay_us); + gpiod_set_value(props->ctrl_gpio, 0); + udelay(props->timing.detect_us); + gpiod_set_value(props->ctrl_gpio, 1); +} +EXPORT_SYMBOL_NS_GPL(expresswire_enable, EXPRESSWIRE); + +void expresswire_start(struct expresswire_common_props *props) +{ + gpiod_set_value(props->ctrl_gpio, 1); + udelay(props->timing.data_start_us); +} +EXPORT_SYMBOL_NS_GPL(expresswire_start, EXPRESSWIRE); + +void expresswire_end(struct expresswire_common_props *props) +{ + gpiod_set_value(props->ctrl_gpio, 0); + udelay(props->timing.end_of_data_low_us); + gpiod_set_value(props->ctrl_gpio, 1); + udelay(props->timing.end_of_data_high_us); +} +EXPORT_SYMBOL_NS_GPL(expresswire_end, EXPRESSWIRE); + +void expresswire_set_bit(struct expresswire_common_props *props, bool bit) +{ + if (bit) { + gpiod_set_value(props->ctrl_gpio, 0); + udelay(props->timing.short_bitset_us); + gpiod_set_value(props->ctrl_gpio, 1); + udelay(props->timing.long_bitset_us); + } else { + gpiod_set_value(props->ctrl_gpio, 0); + udelay(props->timing.long_bitset_us); + gpiod_set_value(props->ctrl_gpio, 1); + udelay(props->timing.short_bitset_us); + } +} +EXPORT_SYMBOL_NS_GPL(expresswire_set_bit, EXPRESSWIRE); + +void expresswire_write_u8(struct expresswire_common_props *props, u8 val) +{ + expresswire_start(props); + for (int i = 7; i >= 0; i--) + expresswire_set_bit(props, val & BIT(i)); + expresswire_end(props); +} +EXPORT_SYMBOL_NS_GPL(expresswire_write_u8, EXPRESSWIRE); diff --git a/include/linux/leds-expresswire.h b/include/linux/leds-expresswire.h new file mode 100644 index 000000000000..3c61902ccac8 --- /dev/null +++ b/include/linux/leds-expresswire.h @@ -0,0 +1,36 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * Shared library for Kinetic's ExpressWire protocol. + * This protocol works by pulsing the ExpressWire IC's control GPIO. + * ktd2692 and ktd2801 are known to use this protocol. + */ + +#ifndef _LEDS_EXPRESSWIRE_H +#define _LEDS_EXPRESSWIRE_H + +#include + +struct expresswire_timing { + unsigned long poweroff_us; + unsigned long detect_delay_us; + unsigned long detect_us; + unsigned long data_start_us; + unsigned long end_of_data_low_us; + unsigned long end_of_data_high_us; + unsigned long short_bitset_us; + unsigned long long_bitset_us; +}; + +struct expresswire_common_props { + struct gpio_desc *ctrl_gpio; + struct expresswire_timing timing; +}; + +void expresswire_power_off(struct expresswire_common_props *props); +void expresswire_enable(struct expresswire_common_props *props); +void expresswire_start(struct expresswire_common_props *props); +void expresswire_end(struct expresswire_common_props *props); +void expresswire_set_bit(struct expresswire_common_props *props, bool bit); +void expresswire_write_u8(struct expresswire_common_props *props, u8 val); + +#endif /* _LEDS_EXPRESSWIRE_H */ From patchwork Thu Jan 25 15:30:54 2024 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 8bit X-Patchwork-Submitter: =?utf-8?q?Duje_Mihanovi=C4=87?= X-Patchwork-Id: 13531115 Received: from mx.skole.hr (mx2.hosting.skole.hr [161.53.165.186]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.subspace.kernel.org (Postfix) with ESMTPS id 5AF9F73179; Thu, 25 Jan 2024 15:32:05 +0000 (UTC) Authentication-Results: smtp.subspace.kernel.org; arc=none smtp.client-ip=161.53.165.186 ARC-Seal: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1706196727; cv=none; b=lFtoRiwD35GTtJRmFX1Hia/sOF6pFdlje3rtttPUBG5pf0VEmwLTG+dERCgLEZNvtiVtHLtjd3Ckjjzy2sjSDm/yMJD8JGQVhtL/rYtUPWRY7iDdND2Wd0x7W4nCyKbw34bCkhiiX85Kince93z256AdS2Z37HnypUBiLI2FCcY= ARC-Message-Signature: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1706196727; c=relaxed/simple; bh=kkFVHvkdEMlrMk1Pdy+6LMKQ0RaGip86dJw2W639SpM=; h=From:Date:Subject:MIME-Version:Content-Type:Message-Id:References: In-Reply-To:To:Cc; b=XsCDHIXuwgnVa5jkbBJwGXocwdmZK8vaXuvh8281mzq1sAfjM4jTASi2aNRBtZakH2edCtJX5D/C3S0ESNcT2OsSjXgexIAobGNNjXp5O3WB7++lBhvqUV82QMYtSUd04FyAoAF+TQQ5hQijWqfcQstSJNX6I35GzNKkw55ULeE= ARC-Authentication-Results: i=1; smtp.subspace.kernel.org; dmarc=none (p=none dis=none) header.from=skole.hr; spf=pass smtp.mailfrom=skole.hr; arc=none smtp.client-ip=161.53.165.186 Authentication-Results: smtp.subspace.kernel.org; dmarc=none (p=none dis=none) header.from=skole.hr Authentication-Results: smtp.subspace.kernel.org; spf=pass smtp.mailfrom=skole.hr Received: from mx2.hosting.skole.hr (localhost.localdomain [127.0.0.1]) by mx.skole.hr (mx.skole.hr) with ESMTP id D76F2861FB; Thu, 25 Jan 2024 16:31:56 +0100 (CET) From: =?utf-8?q?Duje_Mihanovi=C4=87?= Date: Thu, 25 Jan 2024 16:30:54 +0100 Subject: [PATCH v5 2/4] leds: ktd2692: convert to use ExpressWire library Precedence: bulk X-Mailing-List: linux-fbdev@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 Message-Id: <20240125-ktd2801-v5-2-e22da232a825@skole.hr> References: <20240125-ktd2801-v5-0-e22da232a825@skole.hr> In-Reply-To: <20240125-ktd2801-v5-0-e22da232a825@skole.hr> To: Lee Jones , Daniel Thompson , Jingoo Han , Pavel Machek , Rob Herring , Krzysztof Kozlowski , Conor Dooley , Helge Deller , Linus Walleij Cc: Karel Balej , ~postmarketos/upstreaming@lists.sr.ht, phone-devel@vger.kernel.org, dri-devel@lists.freedesktop.org, linux-leds@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-fbdev@vger.kernel.org, =?utf-8?q?Duje_?= =?utf-8?q?Mihanovi=C4=87?= X-Mailer: b4 0.12.4 X-Developer-Signature: v=1; a=openpgp-sha256; l=8331; i=duje.mihanovic@skole.hr; h=from:subject:message-id; bh=kkFVHvkdEMlrMk1Pdy+6LMKQ0RaGip86dJw2W639SpM=; b=owEBbQKS/ZANAwAIAZoRnrBCLZbhAcsmYgBlsn7DcNYwR3737nbubVZ5v4DHUMslfShveGUby bSzzVmaHxKJAjMEAAEIAB0WIQRT351NnD/hEPs2LXiaEZ6wQi2W4QUCZbJ+wwAKCRCaEZ6wQi2W 4d9vD/wKATHZFjiz5XDYltCyAjq3JP0ZArksF5gCQFZJnV2b2zNZPXIdBQzpCNTihu2+s9qj6yx YX5OMTeq8AbxFzClh1gwjm+tLAixju0eg2HoEUYj1bbkI7CMxI6kL3EmWTX/dLG8rawn8LHHXJT eBViVHcnu8Tuz/eOG0BPOHif4SWe/s+cSBcCRAwfgCpW3X1YZM4cCK56UhNWI58Pu8syY3mW/RN /BDUlImfOwSCsQ1SuZvzPiNJKOi3BIgLoipHWGUfDvIpg8HD2Jj4ZMwTN5E1WAGLPqTErhD3qeP oT0C6woUjhSloUMxZBGFVY0D0zcRerVd09bkzOb3CNGk/EhCMnqJgSz2VMsZcue+1FGS8EnbDhu 1yQ6jVCOnP92QAkm5njSgphVPVOLLiykIwaxDb7P89tq2e1ED0iF/xix4h/Zw1Bk6+ej5unzwwl Jq++acESBlXtQ47kpC1UdmnKLCR/S6v1ZbcMfHQl697lBrv2bEKrh3x4jkGX9dR+iwLBIQPz/Se +VOeLXsg13GcPDdNaMGR+5D1pDTgXQWjPDyoAZJQI82aF3Tjh2mEzu6LX3e6dKmjL/IElz9f2D5 tYgN2DDP91d161ruoDnErbCOZjoZDfs8Re4O3REc8gMvUD6pL3hLN+4mEt4+IdMOHRwbvpdUCHU HPUgvQGl1xPE6hA== X-Developer-Key: i=duje.mihanovic@skole.hr; a=openpgp; fpr=53DF9D4D9C3FE110FB362D789A119EB0422D96E1 The KTD2692 uses the ExpressWire protocol implemented in the newly introduced ExpressWire library. Convert the driver to use the library. Suggested-by: Daniel Thompson Reviewed-by: Linus Walleij Reviewed-by: Daniel Thompson Signed-off-by: Duje Mihanović --- drivers/leds/flash/Kconfig | 2 +- drivers/leds/flash/leds-ktd2692.c | 116 +++++++++----------------------------- 2 files changed, 28 insertions(+), 90 deletions(-) diff --git a/drivers/leds/flash/Kconfig b/drivers/leds/flash/Kconfig index 4e08dbc05709..a0fb755b58dc 100644 --- a/drivers/leds/flash/Kconfig +++ b/drivers/leds/flash/Kconfig @@ -23,7 +23,7 @@ config LEDS_AS3645A config LEDS_KTD2692 tristate "LED support for Kinetic KTD2692 flash LED controller" depends on OF - depends on GPIOLIB || COMPILE_TEST + select LEDS_EXPRESSWIRE help This option enables support for Kinetic KTD2692 LED flash connected through ExpressWire interface. diff --git a/drivers/leds/flash/leds-ktd2692.c b/drivers/leds/flash/leds-ktd2692.c index 598eee5daa52..7bb0aa2753e3 100644 --- a/drivers/leds/flash/leds-ktd2692.c +++ b/drivers/leds/flash/leds-ktd2692.c @@ -6,9 +6,9 @@ * Ingi Kim */ -#include #include #include +#include #include #include #include @@ -37,22 +37,9 @@ #define KTD2692_REG_FLASH_CURRENT_BASE 0x80 #define KTD2692_REG_MODE_BASE 0xA0 -/* Set bit coding time for expresswire interface */ -#define KTD2692_TIME_RESET_US 700 -#define KTD2692_TIME_DATA_START_TIME_US 10 -#define KTD2692_TIME_HIGH_END_OF_DATA_US 350 -#define KTD2692_TIME_LOW_END_OF_DATA_US 10 -#define KTD2692_TIME_SHORT_BITSET_US 4 -#define KTD2692_TIME_LONG_BITSET_US 12 - /* KTD2692 default length of name */ #define KTD2692_NAME_LENGTH 20 -enum ktd2692_bitset { - KTD2692_LOW = 0, - KTD2692_HIGH, -}; - /* Movie / Flash Mode Control */ enum ktd2692_led_mode { KTD2692_MODE_DISABLE = 0, /* default */ @@ -71,7 +58,19 @@ struct ktd2692_led_config_data { enum led_brightness max_brightness; }; +const struct expresswire_timing ktd2692_timing = { + .poweroff_us = 700, + .data_start_us = 10, + .end_of_data_low_us = 10, + .end_of_data_high_us = 350, + .short_bitset_us = 4, + .long_bitset_us = 12 +}; + struct ktd2692_context { + /* Common ExpressWire properties (ctrl GPIO and timing) */ + struct expresswire_common_props props; + /* Related LED Flash class device */ struct led_classdev_flash fled_cdev; @@ -80,7 +79,6 @@ struct ktd2692_context { struct regulator *regulator; struct gpio_desc *aux_gpio; - struct gpio_desc *ctrl_gpio; enum ktd2692_led_mode mode; enum led_brightness torch_brightness; @@ -92,67 +90,6 @@ static struct ktd2692_context *fled_cdev_to_led( return container_of(fled_cdev, struct ktd2692_context, fled_cdev); } -static void ktd2692_expresswire_start(struct ktd2692_context *led) -{ - gpiod_direction_output(led->ctrl_gpio, KTD2692_HIGH); - udelay(KTD2692_TIME_DATA_START_TIME_US); -} - -static void ktd2692_expresswire_reset(struct ktd2692_context *led) -{ - gpiod_direction_output(led->ctrl_gpio, KTD2692_LOW); - udelay(KTD2692_TIME_RESET_US); -} - -static void ktd2692_expresswire_end(struct ktd2692_context *led) -{ - gpiod_direction_output(led->ctrl_gpio, KTD2692_LOW); - udelay(KTD2692_TIME_LOW_END_OF_DATA_US); - gpiod_direction_output(led->ctrl_gpio, KTD2692_HIGH); - udelay(KTD2692_TIME_HIGH_END_OF_DATA_US); -} - -static void ktd2692_expresswire_set_bit(struct ktd2692_context *led, bool bit) -{ - /* - * The Low Bit(0) and High Bit(1) is based on a time detection - * algorithm between time low and time high - * Time_(L_LB) : Low time of the Low Bit(0) - * Time_(H_LB) : High time of the LOW Bit(0) - * Time_(L_HB) : Low time of the High Bit(1) - * Time_(H_HB) : High time of the High Bit(1) - * - * It can be simplified to: - * Low Bit(0) : 2 * Time_(H_LB) < Time_(L_LB) - * High Bit(1) : 2 * Time_(L_HB) < Time_(H_HB) - * HIGH ___ ____ _.. _________ ___ - * |_________| |_.. |____| |__| - * LOW - * [ Low Bit (0) ] [ High Bit(1) ] - */ - if (bit) { - gpiod_direction_output(led->ctrl_gpio, KTD2692_LOW); - udelay(KTD2692_TIME_SHORT_BITSET_US); - gpiod_direction_output(led->ctrl_gpio, KTD2692_HIGH); - udelay(KTD2692_TIME_LONG_BITSET_US); - } else { - gpiod_direction_output(led->ctrl_gpio, KTD2692_LOW); - udelay(KTD2692_TIME_LONG_BITSET_US); - gpiod_direction_output(led->ctrl_gpio, KTD2692_HIGH); - udelay(KTD2692_TIME_SHORT_BITSET_US); - } -} - -static void ktd2692_expresswire_write(struct ktd2692_context *led, u8 value) -{ - int i; - - ktd2692_expresswire_start(led); - for (i = 7; i >= 0; i--) - ktd2692_expresswire_set_bit(led, value & BIT(i)); - ktd2692_expresswire_end(led); -} - static int ktd2692_led_brightness_set(struct led_classdev *led_cdev, enum led_brightness brightness) { @@ -163,14 +100,14 @@ static int ktd2692_led_brightness_set(struct led_classdev *led_cdev, if (brightness == LED_OFF) { led->mode = KTD2692_MODE_DISABLE; - gpiod_direction_output(led->aux_gpio, KTD2692_LOW); + gpiod_direction_output(led->aux_gpio, 0); } else { - ktd2692_expresswire_write(led, brightness | + expresswire_write_u8(&led->props, brightness | KTD2692_REG_MOVIE_CURRENT_BASE); led->mode = KTD2692_MODE_MOVIE; } - ktd2692_expresswire_write(led, led->mode | KTD2692_REG_MODE_BASE); + expresswire_write_u8(&led->props, led->mode | KTD2692_REG_MODE_BASE); mutex_unlock(&led->lock); return 0; @@ -187,17 +124,17 @@ static int ktd2692_led_flash_strobe_set(struct led_classdev_flash *fled_cdev, if (state) { flash_tm_reg = GET_TIMEOUT_OFFSET(timeout->val, timeout->step); - ktd2692_expresswire_write(led, flash_tm_reg + expresswire_write_u8(&led->props, flash_tm_reg | KTD2692_REG_FLASH_TIMEOUT_BASE); led->mode = KTD2692_MODE_FLASH; - gpiod_direction_output(led->aux_gpio, KTD2692_HIGH); + gpiod_direction_output(led->aux_gpio, 1); } else { led->mode = KTD2692_MODE_DISABLE; - gpiod_direction_output(led->aux_gpio, KTD2692_LOW); + gpiod_direction_output(led->aux_gpio, 0); } - ktd2692_expresswire_write(led, led->mode | KTD2692_REG_MODE_BASE); + expresswire_write_u8(&led->props, led->mode | KTD2692_REG_MODE_BASE); fled_cdev->led_cdev.brightness = LED_OFF; led->mode = KTD2692_MODE_DISABLE; @@ -247,12 +184,12 @@ static void ktd2692_init_flash_timeout(struct led_classdev_flash *fled_cdev, static void ktd2692_setup(struct ktd2692_context *led) { led->mode = KTD2692_MODE_DISABLE; - ktd2692_expresswire_reset(led); - gpiod_direction_output(led->aux_gpio, KTD2692_LOW); + expresswire_power_off(&led->props); + gpiod_direction_output(led->aux_gpio, 0); - ktd2692_expresswire_write(led, (KTD2692_MM_MIN_CURR_THRESHOLD_SCALE - 1) + expresswire_write_u8(&led->props, (KTD2692_MM_MIN_CURR_THRESHOLD_SCALE - 1) | KTD2692_REG_MM_MIN_CURR_THRESHOLD_BASE); - ktd2692_expresswire_write(led, KTD2692_FLASH_MODE_CURR_PERCENT(45) + expresswire_write_u8(&led->props, KTD2692_FLASH_MODE_CURR_PERCENT(45) | KTD2692_REG_FLASH_CURRENT_BASE); } @@ -277,8 +214,8 @@ static int ktd2692_parse_dt(struct ktd2692_context *led, struct device *dev, if (!np) return -ENXIO; - led->ctrl_gpio = devm_gpiod_get(dev, "ctrl", GPIOD_ASIS); - ret = PTR_ERR_OR_ZERO(led->ctrl_gpio); + led->props.ctrl_gpio = devm_gpiod_get(dev, "ctrl", GPIOD_ASIS); + ret = PTR_ERR_OR_ZERO(led->props.ctrl_gpio); if (ret) return dev_err_probe(dev, ret, "cannot get ctrl-gpios\n"); @@ -412,6 +349,7 @@ static struct platform_driver ktd2692_driver = { module_platform_driver(ktd2692_driver); +MODULE_IMPORT_NS(EXPRESSWIRE); MODULE_AUTHOR("Ingi Kim "); MODULE_DESCRIPTION("Kinetic KTD2692 LED driver"); MODULE_LICENSE("GPL v2"); From patchwork Thu Jan 25 15:30:55 2024 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 8bit X-Patchwork-Submitter: =?utf-8?q?Duje_Mihanovi=C4=87?= X-Patchwork-Id: 13531117 Received: from mx.skole.hr (mx1.hosting.skole.hr [161.53.165.185]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.subspace.kernel.org (Postfix) with ESMTPS id D9D42745DD; Thu, 25 Jan 2024 15:32:07 +0000 (UTC) Authentication-Results: smtp.subspace.kernel.org; arc=none smtp.client-ip=161.53.165.185 ARC-Seal: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1706196730; cv=none; b=d1gRvW6A0MliNVNyp9K9QNkaMiAJa+pqc0zNUOu7GPbyS0UMxepqqx5J7AqI3na/SP5uHUKipXpL4DMck8HFukH8K/N3HPB2aJh20/eJD5Jbj6ptQee9CkDrvW7f1J0N+HFuEuthztXW/5FbWckdDO6LTwRuKkSTdmDMScHldL8= ARC-Message-Signature: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1706196730; c=relaxed/simple; bh=LJvKeqWnmJS9YgQYzDhJWoFRmXHdCPe0hkHgpXGDTkE=; h=From:Date:Subject:MIME-Version:Content-Type:Message-Id:References: In-Reply-To:To:Cc; b=kFEQ1NvQBaRiLxGfhjnQPV4fUhO9DtlGOlnP03noCydS9WsA7B6WG7lkSEeuaM/1tFf0jMF0SsCoMQYQLTAuuaY6nI/AqUUfWgNSJpobfkG+uq2FqYxpzYG9bualf7apwIYe6Dvh6DvayyroIfYdEUMPWJ/wwXgZpiwPkPKuunI= ARC-Authentication-Results: i=1; smtp.subspace.kernel.org; dmarc=none (p=none dis=none) header.from=skole.hr; spf=pass smtp.mailfrom=skole.hr; arc=none smtp.client-ip=161.53.165.185 Authentication-Results: smtp.subspace.kernel.org; dmarc=none (p=none dis=none) header.from=skole.hr Authentication-Results: smtp.subspace.kernel.org; spf=pass smtp.mailfrom=skole.hr Received: from mx1.hosting.skole.hr (localhost.localdomain [127.0.0.1]) by mx.skole.hr (mx.skole.hr) with ESMTP id A4F1084FE8; Thu, 25 Jan 2024 16:31:59 +0100 (CET) From: =?utf-8?q?Duje_Mihanovi=C4=87?= Date: Thu, 25 Jan 2024 16:30:55 +0100 Subject: [PATCH v5 3/4] dt-bindings: backlight: add Kinetic KTD2801 binding Precedence: bulk X-Mailing-List: linux-fbdev@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 Message-Id: <20240125-ktd2801-v5-3-e22da232a825@skole.hr> References: <20240125-ktd2801-v5-0-e22da232a825@skole.hr> In-Reply-To: <20240125-ktd2801-v5-0-e22da232a825@skole.hr> To: Lee Jones , Daniel Thompson , Jingoo Han , Pavel Machek , Rob Herring , Krzysztof Kozlowski , Conor Dooley , Helge Deller , Linus Walleij Cc: Karel Balej , ~postmarketos/upstreaming@lists.sr.ht, phone-devel@vger.kernel.org, dri-devel@lists.freedesktop.org, linux-leds@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-fbdev@vger.kernel.org, =?utf-8?q?Duje_?= =?utf-8?q?Mihanovi=C4=87?= , Krzysztof Kozlowski X-Mailer: b4 0.12.4 X-Developer-Signature: v=1; a=openpgp-sha256; l=2000; i=duje.mihanovic@skole.hr; h=from:subject:message-id; bh=LJvKeqWnmJS9YgQYzDhJWoFRmXHdCPe0hkHgpXGDTkE=; b=owEBbQKS/ZANAwAIAZoRnrBCLZbhAcsmYgBlsn7DgswBUZqnKT+8/fcnn9Hru+hah1ioow/Af vXnD4GbKIyJAjMEAAEIAB0WIQRT351NnD/hEPs2LXiaEZ6wQi2W4QUCZbJ+wwAKCRCaEZ6wQi2W 4R0BD/kB/1Eg1ozHsKPtWBSWi3LiCM+qxnj2ZuVCT6/OhEONtnJGsnXjTe5GRZFMElbjnKU5bUK 0Bvew1WXJ2SPqoef0wAmJhXuSVbOVKMWVjaeLDDv8lWY3saxQW6c3spevVPoSDh2devRw3Oa6tC o/3JKl6L634njze/H8v+qsMth8jD54PnN9MekSfP0Mf4YmIaeilDxgRqcd5nL5narH0J76+EONz Y4eYXGyItA2v09zBCe0SURu+zci/Cga/yw1/OdIzRPm4EKNc8hy7g9xfxDuTjMAHmk98arzFOdu KGbzB5FPhpCYPZjmEbQQEYKVH3iaOckm/P6AzFqaDcu/P5khVBCeq5jcY/LH99vaVEs0EcW4W4m XxCkQB6hLLns3wqKaeqdHB7ORHYsMai1ppkTki1AFQWoS+WKkD0TE7SBYb9SMobDimgK3Hi0uZw xuMteBoc7ImL6F5aVB2ZUHVXdOIfsav9JlPS9jmNMW11P0ZrilAa3jbTNhCNVM7PqwudogIVLpz TtoufeERwAsfbxVUj6MskA041zUuwdfn8xat2aJe01vop6ItZ6G+KoXcWxe26++jXIHD3lwIPQ6 h8ztWDgrcVG4zq+m6lDYEOdKUpwRXtRxaR9McbnpA6r28wNl8BldfgJy342B08zvwQ7FgQ5xTig 3cAbMMec7AzUZ6w== X-Developer-Key: i=duje.mihanovic@skole.hr; a=openpgp; fpr=53DF9D4D9C3FE110FB362D789A119EB0422D96E1 KTD2801 is a LED backlight driver IC found in samsung,coreprimevelte. The brightness can be set using PWM or the ExpressWire protocol. Add a DT binding for the KTD2801. Reviewed-by: Krzysztof Kozlowski Reviewed-by: Linus Walleij Reviewed-by: Daniel Thompson Signed-off-by: Duje Mihanović --- .../bindings/leds/backlight/kinetic,ktd2801.yaml | 46 ++++++++++++++++++++++ 1 file changed, 46 insertions(+) diff --git a/Documentation/devicetree/bindings/leds/backlight/kinetic,ktd2801.yaml b/Documentation/devicetree/bindings/leds/backlight/kinetic,ktd2801.yaml new file mode 100644 index 000000000000..b005065e0f48 --- /dev/null +++ b/Documentation/devicetree/bindings/leds/backlight/kinetic,ktd2801.yaml @@ -0,0 +1,46 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/leds/backlight/kinetic,ktd2801.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Kinetic Technologies KTD2801 one-wire backlight + +maintainers: + - Duje Mihanović + +description: | + The Kinetic Technologies KTD2801 is a LED backlight driver controlled + by a single GPIO line. The driver can be controlled with a PWM signal + or by pulsing the GPIO line to set the backlight level. This is called + "ExpressWire". + +allOf: + - $ref: common.yaml# + +properties: + compatible: + const: kinetic,ktd2801 + + ctrl-gpios: + maxItems: 1 + + default-brightness: true + max-brightness: true + +required: + - compatible + - ctrl-gpios + +additionalProperties: false + +examples: + - | + #include + + backlight { + compatible = "kinetic,ktd2801"; + ctrl-gpios = <&gpio 97 GPIO_ACTIVE_HIGH>; + max-brightness = <210>; + default-brightness = <100>; + }; From patchwork Thu Jan 25 15:30:56 2024 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 8bit X-Patchwork-Submitter: =?utf-8?q?Duje_Mihanovi=C4=87?= X-Patchwork-Id: 13531116 Received: from mx.skole.hr (mx2.hosting.skole.hr [161.53.165.186]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.subspace.kernel.org (Postfix) with ESMTPS id 2C89A73172; Thu, 25 Jan 2024 15:32:05 +0000 (UTC) Authentication-Results: smtp.subspace.kernel.org; arc=none smtp.client-ip=161.53.165.186 ARC-Seal: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1706196728; cv=none; b=J5qnrB/PfaGfvsLBkntqHS9HWE7opC3+vhn86F8lw2W3hMBDCXJ7t5d25hpvs01OsCVUUtDiCkyJOgXYbv552zsr/jbQ/A1Vuv9HtZwJCqw2g7Ch/HdwvaQpiQogYJnyatBd+WzYmFz5ubKKlJ3pR8B+YqVTwsl+0z5jJs/neXk= ARC-Message-Signature: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1706196728; c=relaxed/simple; bh=9oIB83pc/ZyTg66e328/z4fCGwof+pG+pI1cGESw4c0=; h=From:Date:Subject:MIME-Version:Content-Type:Message-Id:References: In-Reply-To:To:Cc; b=bta8KBPLbDARKgtIsjJLTe7SaB6I1CzA+APybOFnA8zslX8LsonUz7qQhba5KF2K9tuZL+geRDR8V/sBsPF1GpGlx20dLv2VANoMryL6+z5Jh9cOtf10B16outRryPQ+zqtFBEVs+WgIcXt+1gSb1n49bk+KL4xjwbiEQhS7rq8= ARC-Authentication-Results: i=1; smtp.subspace.kernel.org; dmarc=none (p=none dis=none) header.from=skole.hr; spf=pass smtp.mailfrom=skole.hr; arc=none smtp.client-ip=161.53.165.186 Authentication-Results: smtp.subspace.kernel.org; dmarc=none (p=none dis=none) header.from=skole.hr Authentication-Results: smtp.subspace.kernel.org; spf=pass smtp.mailfrom=skole.hr Received: from mx2.hosting.skole.hr (localhost.localdomain [127.0.0.1]) by mx.skole.hr (mx.skole.hr) with ESMTP id 10732862B0; Thu, 25 Jan 2024 16:31:58 +0100 (CET) From: =?utf-8?q?Duje_Mihanovi=C4=87?= Date: Thu, 25 Jan 2024 16:30:56 +0100 Subject: [PATCH v5 4/4] backlight: Add Kinetic KTD2801 backlight support Precedence: bulk X-Mailing-List: linux-fbdev@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 Message-Id: <20240125-ktd2801-v5-4-e22da232a825@skole.hr> References: <20240125-ktd2801-v5-0-e22da232a825@skole.hr> In-Reply-To: <20240125-ktd2801-v5-0-e22da232a825@skole.hr> To: Lee Jones , Daniel Thompson , Jingoo Han , Pavel Machek , Rob Herring , Krzysztof Kozlowski , Conor Dooley , Helge Deller , Linus Walleij Cc: Karel Balej , ~postmarketos/upstreaming@lists.sr.ht, phone-devel@vger.kernel.org, dri-devel@lists.freedesktop.org, linux-leds@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-fbdev@vger.kernel.org, =?utf-8?q?Duje_?= =?utf-8?q?Mihanovi=C4=87?= X-Mailer: b4 0.12.4 X-Developer-Signature: v=1; a=openpgp-sha256; l=6508; i=duje.mihanovic@skole.hr; h=from:subject:message-id; bh=9oIB83pc/ZyTg66e328/z4fCGwof+pG+pI1cGESw4c0=; b=owEBbQKS/ZANAwAIAZoRnrBCLZbhAcsmYgBlsn7DzGjopG3zagxQdzO39RFkWfcgbL98E7cgE 6mQxJ+xqCuJAjMEAAEIAB0WIQRT351NnD/hEPs2LXiaEZ6wQi2W4QUCZbJ+wwAKCRCaEZ6wQi2W 4bK2EACrKqCjTzyf6knLrx0GBqRH1F4B3CAYyruA8cUQExJQWc5jI0nAF1hRrrfw3Z6OebH2Rmx mKQkFb9+2KL5Snf9cikzqHaIKj8ZyDhtUFqQKd4S0U8PRv+xWe8ieAb+rX/EoVnLZmDurNXTCnm vp/4PmXtd6swUY3Y0mge+QhwrBbmi3UQujerDHnDK+BoKnsTcdDFBqd20O+rFtsrXQeIqWIo8aY yhTHJCf1rvy3bTDg+s3jXxC9CRM7pyVhqpmfKSXnuvi24fobYkhMDB2EmiR0didy4CDlJavj3m+ VvLZSlUyCMwlVy+eXj80A2KmsEf3RiaNZs7gxvaLjdTV8Z8+T3GEMa3/uPetlIApW4sEWiYKoDf ldHYX4m+Th2wIACdQbiDdclikspvaAGuzEluBgGT1DjeprvNfosTH5MRZLsN2Q0WIOYTh3suKPk HYLjnqaFZdYDkIkN0x4Pc8DQh5xLQ8Sl6OaRuajwDdy0hXLroFeLy0HSTpPiOW8UONZNA68XBCn wQadc/JfOJBQCgkwRiktmqAQgoUHsDufOpzWM+CpvI2HM7o9NpsMhRWd3gT8NuvMHjFTOfLGoue EvcvxhVf9phmwsSh1FErev7VBrRuTn1Lknu1sPpLD74CelV4mz3mwu4wcreCaPSvuxiCIQWHPBM 7YZDuatn7GBvkhA== X-Developer-Key: i=duje.mihanovic@skole.hr; a=openpgp; fpr=53DF9D4D9C3FE110FB362D789A119EB0422D96E1 KTD2801 is a LED backlight driver IC found in samsung,coreprimevelte. The brightness can be set using PWM or the ExpressWire protocol. Add support for the KTD2801. Reviewed-by: Linus Walleij Reviewed-by: Daniel Thompson Signed-off-by: Duje Mihanović --- MAINTAINERS | 6 ++ drivers/video/backlight/Kconfig | 7 ++ drivers/video/backlight/Makefile | 1 + drivers/video/backlight/ktd2801-backlight.c | 128 ++++++++++++++++++++++++++++ 4 files changed, 142 insertions(+) diff --git a/MAINTAINERS b/MAINTAINERS index e1c83e0e837a..01cd1a460907 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -12052,6 +12052,12 @@ S: Maintained F: Documentation/devicetree/bindings/leds/backlight/kinetic,ktd253.yaml F: drivers/video/backlight/ktd253-backlight.c +KTD2801 BACKLIGHT DRIVER +M: Duje Mihanović +S: Maintained +F: Documentation/devicetree/bindings/leds/backlight/kinetic,ktd2801.yaml +F: drivers/video/backlight/ktd2801-backlight.c + KTEST M: Steven Rostedt M: John Hawley diff --git a/drivers/video/backlight/Kconfig b/drivers/video/backlight/Kconfig index ea2d0d69bd8c..230bca07b09d 100644 --- a/drivers/video/backlight/Kconfig +++ b/drivers/video/backlight/Kconfig @@ -183,6 +183,13 @@ config BACKLIGHT_KTD253 which is a 1-wire GPIO-controlled backlight found in some mobile phones. +config BACKLIGHT_KTD2801 + tristate "Backlight Driver for Kinetic KTD2801" + select LEDS_EXPRESSWIRE + help + Say Y to enable the backlight driver for the Kinetic KTD2801 1-wire + GPIO-controlled backlight found in Samsung Galaxy Core Prime VE LTE. + config BACKLIGHT_KTZ8866 tristate "Backlight Driver for Kinetic KTZ8866" depends on I2C diff --git a/drivers/video/backlight/Makefile b/drivers/video/backlight/Makefile index 06966cb20459..8d2cb252042d 100644 --- a/drivers/video/backlight/Makefile +++ b/drivers/video/backlight/Makefile @@ -34,6 +34,7 @@ obj-$(CONFIG_BACKLIGHT_HP680) += hp680_bl.o obj-$(CONFIG_BACKLIGHT_HP700) += jornada720_bl.o obj-$(CONFIG_BACKLIGHT_IPAQ_MICRO) += ipaq_micro_bl.o obj-$(CONFIG_BACKLIGHT_KTD253) += ktd253-backlight.o +obj-$(CONFIG_BACKLIGHT_KTD2801) += ktd2801-backlight.o obj-$(CONFIG_BACKLIGHT_KTZ8866) += ktz8866.o obj-$(CONFIG_BACKLIGHT_LM3533) += lm3533_bl.o obj-$(CONFIG_BACKLIGHT_LM3630A) += lm3630a_bl.o diff --git a/drivers/video/backlight/ktd2801-backlight.c b/drivers/video/backlight/ktd2801-backlight.c new file mode 100644 index 000000000000..c020acff40f1 --- /dev/null +++ b/drivers/video/backlight/ktd2801-backlight.c @@ -0,0 +1,128 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Datasheet: + * https://www.kinet-ic.com/uploads/web/KTD2801/KTD2801-04b.pdf + */ +#include +#include +#include +#include +#include + +#define KTD2801_DEFAULT_BRIGHTNESS 100 +#define KTD2801_MAX_BRIGHTNESS 255 + +/* These values have been extracted from Samsung's driver. */ +const struct expresswire_timing ktd2801_timing = { + .poweroff_us = 2600, + .detect_delay_us = 150, + .detect_us = 270, + .data_start_us = 5, + .short_bitset_us = 5, + .long_bitset_us = 15, + .end_of_data_low_us = 10, + .end_of_data_high_us = 350 +}; + +struct ktd2801_backlight { + struct expresswire_common_props props; + struct backlight_device *bd; + bool was_on; +}; + +static int ktd2801_update_status(struct backlight_device *bd) +{ + struct ktd2801_backlight *ktd2801 = bl_get_data(bd); + u8 brightness = (u8) backlight_get_brightness(bd); + + if (backlight_is_blank(bd)) { + expresswire_power_off(&ktd2801->props); + ktd2801->was_on = false; + return 0; + } + + if (!ktd2801->was_on) { + expresswire_enable(&ktd2801->props); + ktd2801->was_on = true; + } + + expresswire_write_u8(&ktd2801->props, brightness); + + return 0; +} + +static const struct backlight_ops ktd2801_backlight_ops = { + .update_status = ktd2801_update_status, +}; + +static int ktd2801_backlight_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct backlight_device *bd; + struct ktd2801_backlight *ktd2801; + u32 brightness, max_brightness; + int ret; + + ktd2801 = devm_kzalloc(dev, sizeof(*ktd2801), GFP_KERNEL); + if (!ktd2801) + return -ENOMEM; + ktd2801->was_on = true; + ktd2801->props.timing = ktd2801_timing; + + ret = device_property_read_u32(dev, "max-brightness", &max_brightness); + if (ret) + max_brightness = KTD2801_MAX_BRIGHTNESS; + if (max_brightness > KTD2801_MAX_BRIGHTNESS) { + dev_err(dev, "illegal max brightness specified\n"); + max_brightness = KTD2801_MAX_BRIGHTNESS; + } + + ret = device_property_read_u32(dev, "default-brightness", &brightness); + if (ret) + brightness = KTD2801_DEFAULT_BRIGHTNESS; + if (brightness > max_brightness) { + dev_err(dev, "default brightness exceeds max\n"); + brightness = max_brightness; + } + + ktd2801->props.ctrl_gpio = devm_gpiod_get(dev, "ctrl", GPIOD_OUT_HIGH); + if (IS_ERR(ktd2801->props.ctrl_gpio)) + return dev_err_probe(dev, PTR_ERR(ktd2801->props.ctrl_gpio), + "failed to get backlight GPIO"); + gpiod_set_consumer_name(ktd2801->props.ctrl_gpio, dev_name(dev)); + + bd = devm_backlight_device_register(dev, dev_name(dev), dev, ktd2801, + &ktd2801_backlight_ops, NULL); + if (IS_ERR(bd)) + return dev_err_probe(dev, PTR_ERR(bd), + "failed to register backlight"); + + bd->props.max_brightness = max_brightness; + bd->props.brightness = brightness; + + ktd2801->bd = bd; + platform_set_drvdata(pdev, bd); + backlight_update_status(bd); + + return 0; +} + +static const struct of_device_id ktd2801_of_match[] = { + { .compatible = "kinetic,ktd2801" }, + { } +}; +MODULE_DEVICE_TABLE(of, ktd2801_of_match); + +static struct platform_driver ktd2801_backlight_driver = { + .driver = { + .name = "ktd2801-backlight", + .of_match_table = ktd2801_of_match, + }, + .probe = ktd2801_backlight_probe, +}; +module_platform_driver(ktd2801_backlight_driver); + +MODULE_IMPORT_NS(EXPRESSWIRE); +MODULE_AUTHOR("Duje Mihanović "); +MODULE_DESCRIPTION("Kinetic KTD2801 Backlight Driver"); +MODULE_LICENSE("GPL");