From patchwork Wed Apr 24 17:38:00 2024 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 8bit X-Patchwork-Submitter: =?utf-8?q?Marek_Beh=C3=BAn?= X-Patchwork-Id: 13642277 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from smtp.kernel.org (aws-us-west-2-korg-mail-1.web.codeaurora.org [10.30.226.201]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.lore.kernel.org (Postfix) with ESMTPS id D050FC10F15 for ; Wed, 24 Apr 2024 17:38:22 +0000 (UTC) Received: by smtp.kernel.org (Postfix) id 8C2E9C113CD; Wed, 24 Apr 2024 17:38:22 +0000 (UTC) Received: by smtp.kernel.org (Postfix) with ESMTPSA id DA96FC32782; Wed, 24 Apr 2024 17:38:19 +0000 (UTC) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/simple; d=kernel.org; s=k20201202; t=1713980302; bh=rpdXP8YrpKHtxsoxwqtTPtY3EMHNjZIHg+wLDvjBCGU=; h=From:List-Id:To:Cc:Subject:Date:In-Reply-To:References:From; b=a6dSxMYu7a7zSUPfaAzTH8888TuvdU0g46v7L9cgcVE9M1+mTkT3zKVD3yI13bImn bm45TFC0K5DKXRV0HEhqs9j7FAPVMomlSnIXObj236reMhYbqf5ze1O0c7hBhml6DO OrW8pczvyNaA65BanA6TGJ0zpzsG8SySNNL7oJQdywhNQM5Hgp3lpjDMx+zKSBO4VW X1NEGhhQQK4HmCeX91dd/U83gxksIWklPBbWPmg3rkvscwavO26cTIZ62Yt/Gyb1Zw QYYg3mUS1oxnEI4i+lON4ySqAZjkGcLrckASLaUeu/LTRG2B91zVb9+lD3eJw3NepZ 5na6lVaU2WUNw== From: =?utf-8?q?Marek_Beh=C3=BAn?= List-Id: To: Gregory CLEMENT , Arnd Bergmann , soc@kernel.org, arm@kernel.org, Andy Shevchenko , Hans de Goede , =?utf-8?q?Ilpo_J=C3=A4rvinen?= Cc: =?utf-8?q?Marek_Beh=C3=BAn?= , Rob Herring , Krzysztof Kozlowski , Conor Dooley , devicetree@vger.kernel.org, Krzysztof Kozlowski Subject: [PATCH v7 1/9] dt-bindings: arm: add cznic,turris-omnia-mcu binding Date: Wed, 24 Apr 2024 19:38:00 +0200 Message-ID: <20240424173809.7214-2-kabel@kernel.org> X-Mailer: git-send-email 2.43.2 In-Reply-To: <20240424173809.7214-1-kabel@kernel.org> References: <20240424173809.7214-1-kabel@kernel.org> MIME-Version: 1.0 Add binding for cznic,turris-omnia-mcu, the device-tree node representing the system-controller features provided by the MCU on the Turris Omnia router. Signed-off-by: Marek Behún Reviewed-by: Krzysztof Kozlowski Reviewed-by: Conor Dooley --- .../firmware/cznic,turris-omnia-mcu.yaml | 86 +++++++++++++++++++ MAINTAINERS | 1 + 2 files changed, 87 insertions(+) create mode 100644 Documentation/devicetree/bindings/firmware/cznic,turris-omnia-mcu.yaml diff --git a/Documentation/devicetree/bindings/firmware/cznic,turris-omnia-mcu.yaml b/Documentation/devicetree/bindings/firmware/cznic,turris-omnia-mcu.yaml new file mode 100644 index 000000000000..dd9ee21ee24d --- /dev/null +++ b/Documentation/devicetree/bindings/firmware/cznic,turris-omnia-mcu.yaml @@ -0,0 +1,86 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/arm/cznic,turris-omnia-mcu.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: CZ.NIC's Turris Omnia MCU + +maintainers: + - Marek Behún + +description: + The MCU on Turris Omnia acts as a system controller providing additional + GPIOs, interrupts, watchdog, system power off and wakeup configuration. + +properties: + compatible: + const: cznic,turris-omnia-mcu + + reg: + description: MCU I2C slave address + maxItems: 1 + + interrupts: + maxItems: 1 + + interrupt-controller: true + + '#interrupt-cells': + const: 2 + description: | + The first cell specifies the interrupt number (0 to 63), the second cell + specifies interrupt type (which can be one of IRQ_TYPE_EDGE_RISING, + IRQ_TYPE_EDGE_FALLING or IRQ_TYPE_EDGE_BOTH). + The interrupt numbers correspond sequentially to GPIO numbers, taking the + GPIO banks into account: + IRQ number GPIO bank GPIO pin within bank + 0 - 15 0 0 - 15 + 16 - 47 1 0 - 31 + 48 - 63 2 0 - 15 + There are several exceptions: + IRQ number meaning + 11 LED panel brightness changed by button press + 13 TRNG entropy ready + 14 ECDSA message signature computation done + + gpio-controller: true + + '#gpio-cells': + const: 3 + description: + The first cell is bank number (0, 1 or 2), the second cell is pin number + within the bank (0 to 15 for banks 0 and 2, 0 to 31 for bank 1), and the + third cell specifies consumer flags. + +required: + - compatible + - reg + - interrupts + - interrupt-controller + - gpio-controller + +additionalProperties: false + +examples: + - | + #include + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + system-controller@2a { + compatible = "cznic,turris-omnia-mcu"; + reg = <0x2a>; + + interrupt-parent = <&gpio1>; + interrupts = <11 IRQ_TYPE_NONE>; + + gpio-controller; + #gpio-cells = <3>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + }; diff --git a/MAINTAINERS b/MAINTAINERS index c0bfad334623..bb869d5b7d4e 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -2143,6 +2143,7 @@ F: Documentation/ABI/testing/sysfs-bus-moxtet-devices F: Documentation/ABI/testing/sysfs-firmware-turris-mox-rwtm F: Documentation/devicetree/bindings/bus/moxtet.txt F: Documentation/devicetree/bindings/firmware/cznic,turris-mox-rwtm.txt +F: Documentation/devicetree/bindings/firmware/cznic,turris-omnia-mcu.yaml F: Documentation/devicetree/bindings/gpio/gpio-moxtet.txt F: Documentation/devicetree/bindings/leds/cznic,turris-omnia-leds.yaml F: Documentation/devicetree/bindings/watchdog/armada-37xx-wdt.txt From patchwork Wed Apr 24 17:38:01 2024 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 8bit X-Patchwork-Submitter: =?utf-8?q?Marek_Beh=C3=BAn?= X-Patchwork-Id: 13642278 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from smtp.kernel.org (aws-us-west-2-korg-mail-1.web.codeaurora.org [10.30.226.201]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.lore.kernel.org (Postfix) with ESMTPS id 74C62C4345F for ; Wed, 24 Apr 2024 17:38:26 +0000 (UTC) Received: by smtp.kernel.org (Postfix) id 490CDC2BD10; Wed, 24 Apr 2024 17:38:26 +0000 (UTC) Received: by smtp.kernel.org (Postfix) with ESMTPSA id E2722C3277B; Wed, 24 Apr 2024 17:38:22 +0000 (UTC) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/simple; d=kernel.org; s=k20201202; t=1713980306; bh=8eaHEGz3Vg/Tqk2HyThhujZVdI2oNL8q81/PzajbX8k=; h=From:List-Id:To:Cc:Subject:Date:In-Reply-To:References:From; b=nlddzr99jH77wYm/hPJWYeygHEBn6Y/QJQas16ZSrfFAYqGz0dDgp51dKUZGgpjHz 4mR3s9Gag2pNm0IJhPLfB6Tt/r3Wy7WwZzQr8xu/ihKJZt/t05E6+V4BrC6uBqbDrY 64XP8g6k9Wrxtavdvqwh7F/tor6M5olhExD9S+mkcSsdvjrfjl+H+YmnpbweOzLu7n +j4dZrqndeT+0p3DXdcmWAXZZS1kkVq1aKL2o6AmSNji/Un7AIgluarkI/umDwP5jP gmTC1Iseem4Euv2/ixvGpdqR0QmOwfycNDZ63Kimf18HrZ3MYYz9/wAODcyi1nzWdp AT9C+0JoeFWTw== From: =?utf-8?q?Marek_Beh=C3=BAn?= List-Id: To: Gregory CLEMENT , Arnd Bergmann , soc@kernel.org, arm@kernel.org, Andy Shevchenko , Hans de Goede , =?utf-8?q?Ilpo_J=C3=A4rvinen?= , Linus Walleij , Bartosz Golaszewski , linux-gpio@vger.kernel.org, Alessandro Zummo , Alexandre Belloni , linux-rtc@vger.kernel.org, Wim Van Sebroeck , Guenter Roeck , linux-watchdog@vger.kernel.org Cc: =?utf-8?q?Marek_Beh=C3=BAn?= Subject: [PATCH v7 2/9] platform: cznic: Add preliminary support for Turris Omnia MCU Date: Wed, 24 Apr 2024 19:38:01 +0200 Message-ID: <20240424173809.7214-3-kabel@kernel.org> X-Mailer: git-send-email 2.43.2 In-Reply-To: <20240424173809.7214-1-kabel@kernel.org> References: <20240424173809.7214-1-kabel@kernel.org> MIME-Version: 1.0 Add the basic skeleton for a new platform driver for the microcontroller found on the Turris Omnia board. Signed-off-by: Marek Behún --- .../sysfs-bus-i2c-devices-turris-omnia-mcu | 81 ++++ MAINTAINERS | 3 + drivers/platform/Kconfig | 2 + drivers/platform/Makefile | 1 + drivers/platform/cznic/Kconfig | 26 ++ drivers/platform/cznic/Makefile | 4 + .../platform/cznic/turris-omnia-mcu-base.c | 376 ++++++++++++++++++ drivers/platform/cznic/turris-omnia-mcu.h | 50 +++ include/linux/turris-omnia-mcu-interface.h | 249 ++++++++++++ 9 files changed, 792 insertions(+) create mode 100644 Documentation/ABI/testing/sysfs-bus-i2c-devices-turris-omnia-mcu create mode 100644 drivers/platform/cznic/Kconfig create mode 100644 drivers/platform/cznic/Makefile create mode 100644 drivers/platform/cznic/turris-omnia-mcu-base.c create mode 100644 drivers/platform/cznic/turris-omnia-mcu.h create mode 100644 include/linux/turris-omnia-mcu-interface.h diff --git a/Documentation/ABI/testing/sysfs-bus-i2c-devices-turris-omnia-mcu b/Documentation/ABI/testing/sysfs-bus-i2c-devices-turris-omnia-mcu new file mode 100644 index 000000000000..ff5e7cb00206 --- /dev/null +++ b/Documentation/ABI/testing/sysfs-bus-i2c-devices-turris-omnia-mcu @@ -0,0 +1,81 @@ +What: /sys/bus/i2c/devices//board_revision +Date: July 2024 +KernelVersion: 6.10 +Contact: Marek Behún +Description: (RO) Contains board revision number. + + Only available if board information is burned in the MCU (older + revisions have board information burned in the ATSHA204-A chip). + + Format: %u. + +What: /sys/bus/i2c/devices//first_mac_address +Date: July 2024 +KernelVersion: 6.10 +Contact: Marek Behún +Description: (RO) Contains device first MAC address. Each Turris Omnia is + allocated 3 MAC addresses. The two additional addresses are + computed from the first one by incrementing it. + + Only available if board information is burned in the MCU (older + revisions have board information burned in the ATSHA204-A chip). + + Format: %pM. + +What: /sys/bus/i2c/devices//fw_features +Date: July 2024 +KernelVersion: 6.10 +Contact: Marek Behún +Description: (RO) Newer versions of the microcontroller firmware report the + features they support. These can be read from this file. If the + MCU firmware is too old, this file reads 0x0. + + Format: 0x%x. + +What: /sys/bus/i2c/devices//fw_version_hash_application +Date: July 2024 +KernelVersion: 6.10 +Contact: Marek Behún +Description: (RO) Contains the version hash (commit hash) of the application + part of the microcontroller firmware. + + Format: %s. + +What: /sys/bus/i2c/devices//fw_version_hash_bootloader +Date: July 2024 +KernelVersion: 6.10 +Contact: Marek Behún +Description: (RO) Contains the version hash (commit hash) of the bootloader + part of the microcontroller firmware. + + Format: %s. + +What: /sys/bus/i2c/devices//mcu_type +Date: July 2024 +KernelVersion: 6.10 +Contact: Marek Behún +Description: (RO) Contains the microcontroller type (STM32, GD32, MKL). + + Format: %s. + +What: /sys/bus/i2c/devices//reset_selector +Date: July 2024 +KernelVersion: 6.10 +Contact: Marek Behún +Description: (RO) Contains the selected factory reset level, determined by + how long the rear reset button was held by the user during board + reset. + + Format: %i. + +What: /sys/bus/i2c/devices//serial_number +Date: July 2024 +KernelVersion: 6.10 +Contact: Marek Behún +Description: (RO) Contains the 64 bit long board serial number in hexadecimal + format. + + Only available if board information is burned in the MCU (older + revisions have board information burned in the ATSHA204-A chip). + + Format: %016X. diff --git a/MAINTAINERS b/MAINTAINERS index bb869d5b7d4e..513b0cd75590 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -2139,6 +2139,7 @@ M: Marek Behún S: Maintained W: https://www.turris.cz/ F: Documentation/ABI/testing/debugfs-moxtet +F: Documentation/ABI/testing/sysfs-bus-i2c-devices-turris-omnia-mcu F: Documentation/ABI/testing/sysfs-bus-moxtet-devices F: Documentation/ABI/testing/sysfs-firmware-turris-mox-rwtm F: Documentation/devicetree/bindings/bus/moxtet.txt @@ -2152,10 +2153,12 @@ F: drivers/firmware/turris-mox-rwtm.c F: drivers/gpio/gpio-moxtet.c F: drivers/leds/leds-turris-omnia.c F: drivers/mailbox/armada-37xx-rwtm-mailbox.c +F: drivers/platform/cznic/ F: drivers/watchdog/armada_37xx_wdt.c F: include/dt-bindings/bus/moxtet.h F: include/linux/armada-37xx-rwtm-mailbox.h F: include/linux/moxtet.h +F: include/linux/turris-omnia-mcu-interface.h ARM/FARADAY FA526 PORT M: Hans Ulli Kroll diff --git a/drivers/platform/Kconfig b/drivers/platform/Kconfig index 868b20361769..fef907a94001 100644 --- a/drivers/platform/Kconfig +++ b/drivers/platform/Kconfig @@ -7,6 +7,8 @@ source "drivers/platform/goldfish/Kconfig" source "drivers/platform/chrome/Kconfig" +source "drivers/platform/cznic/Kconfig" + source "drivers/platform/mellanox/Kconfig" source "drivers/platform/olpc/Kconfig" diff --git a/drivers/platform/Makefile b/drivers/platform/Makefile index 41640172975a..8bf189264374 100644 --- a/drivers/platform/Makefile +++ b/drivers/platform/Makefile @@ -10,4 +10,5 @@ obj-$(CONFIG_MIPS) += mips/ obj-$(CONFIG_OLPC_EC) += olpc/ obj-$(CONFIG_GOLDFISH) += goldfish/ obj-$(CONFIG_CHROME_PLATFORMS) += chrome/ +obj-$(CONFIG_CZNIC_PLATFORMS) += cznic/ obj-$(CONFIG_SURFACE_PLATFORMS) += surface/ diff --git a/drivers/platform/cznic/Kconfig b/drivers/platform/cznic/Kconfig new file mode 100644 index 000000000000..f8560ff9c1af --- /dev/null +++ b/drivers/platform/cznic/Kconfig @@ -0,0 +1,26 @@ +# SPDX-License-Identifier: GPL-2.0-only +# +# For a description of the syntax of this configuration file, +# see Documentation/kbuild/kconfig-language.rst. +# + +menuconfig CZNIC_PLATFORMS + bool "Platform support for CZ.NIC's Turris hardware" + depends on MACH_ARMADA_38X || COMPILE_TEST + help + Say Y here to be able to choose driver support for CZ.NIC's Turris + devices. This option alone does not add any kernel code. + +if CZNIC_PLATFORMS + +config TURRIS_OMNIA_MCU + tristate "Turris Omnia MCU driver" + depends on MACH_ARMADA_38X || COMPILE_TEST + depends on I2C + help + Say Y here to add support for the features implemented by the + microcontroller on the CZ.NIC's Turris Omnia SOHO router. + To compile this driver as a module, choose M here; the module will be + called turris-omnia-mcu. + +endif # CZNIC_PLATFORMS diff --git a/drivers/platform/cznic/Makefile b/drivers/platform/cznic/Makefile new file mode 100644 index 000000000000..31adca73bb94 --- /dev/null +++ b/drivers/platform/cznic/Makefile @@ -0,0 +1,4 @@ +# SPDX-License-Identifier: GPL-2.0-only + +obj-$(CONFIG_TURRIS_OMNIA_MCU) += turris-omnia-mcu.o +turris-omnia-mcu-y := turris-omnia-mcu-base.o diff --git a/drivers/platform/cznic/turris-omnia-mcu-base.c b/drivers/platform/cznic/turris-omnia-mcu-base.c new file mode 100644 index 000000000000..8893c990853a --- /dev/null +++ b/drivers/platform/cznic/turris-omnia-mcu-base.c @@ -0,0 +1,376 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * CZ.NIC's Turris Omnia MCU driver + * + * 2024 by Marek Behún + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "turris-omnia-mcu.h" + +#define OMNIA_FW_VERSION_LEN 20 +#define OMNIA_FW_VERSION_HEX_LEN (2 * OMNIA_FW_VERSION_LEN + 1) +#define OMNIA_BOARD_INFO_LEN 16 + +int omnia_cmd_read(const struct i2c_client *client, u8 cmd, void *reply, + unsigned int len) +{ + struct i2c_msg msgs[2]; + int ret; + + msgs[0].addr = client->addr; + msgs[0].flags = 0; + msgs[0].len = 1; + msgs[0].buf = &cmd; + msgs[1].addr = client->addr; + msgs[1].flags = I2C_M_RD; + msgs[1].len = len; + msgs[1].buf = reply; + + ret = i2c_transfer(client->adapter, msgs, ARRAY_SIZE(msgs)); + if (ret < 0) + return ret; + if (ret != ARRAY_SIZE(msgs)) + return -EIO; + + return 0; +} + +static int omnia_get_version_hash(struct omnia_mcu *mcu, bool bootloader, + u8 version[static OMNIA_FW_VERSION_HEX_LEN]) +{ + u8 reply[OMNIA_FW_VERSION_LEN]; + int err; + + err = omnia_cmd_read(mcu->client, + bootloader ? CMD_GET_FW_VERSION_BOOT + : CMD_GET_FW_VERSION_APP, + reply, sizeof(reply)); + if (err) + return err; + + version[OMNIA_FW_VERSION_HEX_LEN - 1] = '\0'; + bin2hex(version, reply, OMNIA_FW_VERSION_LEN); + + return 0; +} + +static ssize_t fw_version_hash_show(struct device *dev, char *buf, + bool bootloader) +{ + struct omnia_mcu *mcu = dev_get_drvdata(dev); + u8 version[OMNIA_FW_VERSION_HEX_LEN]; + int err; + + err = omnia_get_version_hash(mcu, bootloader, version); + if (err) + return err; + + return sysfs_emit(buf, "%s\n", version); +} + +static ssize_t fw_version_hash_application_show(struct device *dev, + struct device_attribute *a, + char *buf) +{ + return fw_version_hash_show(dev, buf, false); +} +static DEVICE_ATTR_RO(fw_version_hash_application); + +static ssize_t fw_version_hash_bootloader_show(struct device *dev, + struct device_attribute *a, + char *buf) +{ + return fw_version_hash_show(dev, buf, true); +} +static DEVICE_ATTR_RO(fw_version_hash_bootloader); + +static ssize_t fw_features_show(struct device *dev, struct device_attribute *a, + char *buf) +{ + struct omnia_mcu *mcu = dev_get_drvdata(dev); + + return sysfs_emit(buf, "0x%x\n", mcu->features); +} +static DEVICE_ATTR_RO(fw_features); + +static ssize_t mcu_type_show(struct device *dev, struct device_attribute *a, + char *buf) +{ + struct omnia_mcu *mcu = dev_get_drvdata(dev); + + return sysfs_emit(buf, "%s\n", mcu->type); +} +static DEVICE_ATTR_RO(mcu_type); + +static ssize_t reset_selector_show(struct device *dev, + struct device_attribute *a, char *buf) +{ + int ret; + + ret = omnia_cmd_read_u8(to_i2c_client(dev), CMD_GET_RESET); + if (ret < 0) + return ret; + + return sysfs_emit(buf, "%d\n", ret); +} +static DEVICE_ATTR_RO(reset_selector); + +static ssize_t serial_number_show(struct device *dev, + struct device_attribute *a, char *buf) +{ + struct omnia_mcu *mcu = dev_get_drvdata(dev); + + return sysfs_emit(buf, "%016llX\n", mcu->board_serial_number); +} +static DEVICE_ATTR_RO(serial_number); + +static ssize_t first_mac_address_show(struct device *dev, + struct device_attribute *a, char *buf) +{ + struct omnia_mcu *mcu = dev_get_drvdata(dev); + + return sysfs_emit(buf, "%pM\n", mcu->board_first_mac); +} +static DEVICE_ATTR_RO(first_mac_address); + +static ssize_t board_revision_show(struct device *dev, + struct device_attribute *a, char *buf) +{ + struct omnia_mcu *mcu = dev_get_drvdata(dev); + + return sysfs_emit(buf, "%u\n", mcu->board_revision); +} +static DEVICE_ATTR_RO(board_revision); + +static struct attribute *omnia_mcu_base_attrs[] = { + &dev_attr_fw_version_hash_application.attr, + &dev_attr_fw_version_hash_bootloader.attr, + &dev_attr_fw_features.attr, + &dev_attr_mcu_type.attr, + &dev_attr_reset_selector.attr, + &dev_attr_serial_number.attr, + &dev_attr_first_mac_address.attr, + &dev_attr_board_revision.attr, + NULL +}; + +static umode_t omnia_mcu_base_attrs_visible(struct kobject *kobj, + struct attribute *a, int n) +{ + struct device *dev = kobj_to_dev(kobj); + struct omnia_mcu *mcu = dev_get_drvdata(dev); + umode_t mode = a->mode; + + if ((a == &dev_attr_serial_number.attr || + a == &dev_attr_first_mac_address.attr || + a == &dev_attr_board_revision.attr) && + !(mcu->features & FEAT_BOARD_INFO)) + mode = 0; + + return mode; +} + +static const struct attribute_group omnia_mcu_base_group = { + .attrs = omnia_mcu_base_attrs, + .is_visible = omnia_mcu_base_attrs_visible, +}; + +static const struct attribute_group *omnia_mcu_groups[] = { + &omnia_mcu_base_group, + NULL +}; + +static void omnia_mcu_print_version_hash(struct omnia_mcu *mcu, bool bootloader) +{ + const char *type = bootloader ? "bootloader" : "application"; + struct device *dev = &mcu->client->dev; + u8 version[OMNIA_FW_VERSION_HEX_LEN]; + int err; + + err = omnia_get_version_hash(mcu, bootloader, version); + if (err) { + dev_err(dev, "Cannot read MCU %s firmware version: %d\n", type, + err); + return; + } + + dev_info(dev, "MCU %s firmware version hash: %s\n", type, version); +} + +static const char *omnia_status_to_mcu_type(uint16_t status) +{ + switch (status & STS_MCU_TYPE_MASK) { + case STS_MCU_TYPE_STM32: + return "STM32"; + case STS_MCU_TYPE_GD32: + return "GD32"; + case STS_MCU_TYPE_MKL: + return "MKL"; + default: + return "unknown"; + } +} + +static void omnia_info_missing_feature(struct device *dev, const char *feature) +{ + dev_info(dev, + "Your board's MCU firmware does not support the %s feature.\n", + feature); +} + +static int omnia_mcu_read_features(struct omnia_mcu *mcu) +{ + static const struct { + uint16_t mask; + const char *name; + } features[] = { + { FEAT_EXT_CMDS, "extended control and status" }, + { FEAT_WDT_PING, "watchdog pinging" }, + { FEAT_LED_STATE_EXT_MASK, "peripheral LED pins reading" }, + { FEAT_NEW_INT_API, "new interrupt API" }, + { FEAT_POWEROFF_WAKEUP, "poweroff and wakeup" }, + { FEAT_TRNG, "true random number generator" }, + }; + struct device *dev = &mcu->client->dev; + bool suggest_fw_upgrade = false; + int status; + + /* status word holds MCU type, which we need below */ + status = omnia_cmd_read_u16(mcu->client, CMD_GET_STATUS_WORD); + if (status < 0) + return status; + + /* check whether MCU firmware supports the CMD_GET_FEAUTRES command */ + if (status & STS_FEATURES_SUPPORTED) { + __le32 reply; + int ret; + + /* try read 32-bit features */ + ret = omnia_cmd_read(mcu->client, CMD_GET_FEATURES, &reply, + sizeof(reply)); + if (ret) { + /* try read 16-bit features */ + ret = omnia_cmd_read_u16(mcu->client, CMD_GET_FEATURES); + if (ret < 0) + return ret; + + mcu->features = ret; + } else { + mcu->features = le32_to_cpu(reply); + + if (mcu->features & FEAT_FROM_BIT_16_INVALID) + mcu->features &= GENMASK(15, 0); + } + } else { + omnia_info_missing_feature(dev, "feature reading"); + suggest_fw_upgrade = true; + } + + mcu->type = omnia_status_to_mcu_type(status); + dev_info(dev, "MCU type %s%s\n", mcu->type, + (mcu->features & FEAT_PERIPH_MCU) ? + ", with peripheral resets wired" : ""); + + omnia_mcu_print_version_hash(mcu, true); + + if (mcu->features & FEAT_BOOTLOADER) + dev_warn(dev, + "MCU is running bootloader firmware. Was firmware upgrade interrupted?\n"); + else + omnia_mcu_print_version_hash(mcu, false); + + for (unsigned int i = 0; i < ARRAY_SIZE(features); i++) { + if (mcu->features & features[i].mask) + continue; + + omnia_info_missing_feature(dev, features[i].name); + suggest_fw_upgrade = true; + } + + if (suggest_fw_upgrade) + dev_info(dev, + "Consider upgrading MCU firmware with the omnia-mcutool utility.\n"); + + return 0; +} + +static int omnia_mcu_read_board_info(struct omnia_mcu *mcu) +{ + u8 reply[1 + OMNIA_BOARD_INFO_LEN]; + int err; + + err = omnia_cmd_read(mcu->client, CMD_BOARD_INFO_GET, reply, + sizeof(reply)); + if (err) + return err; + + if (reply[0] != OMNIA_BOARD_INFO_LEN) + return -EIO; + + mcu->board_serial_number = get_unaligned_le64(&reply[1]); + memcpy(mcu->board_first_mac, &reply[9], ETH_ALEN); + mcu->board_revision = reply[15]; + + return 0; +} + +static int omnia_mcu_probe(struct i2c_client *client) +{ + struct device *dev = &client->dev; + struct omnia_mcu *mcu; + int err; + + if (!client->irq) + return dev_err_probe(dev, -EINVAL, "IRQ resource not found\n"); + + mcu = devm_kzalloc(dev, sizeof(*mcu), GFP_KERNEL); + if (!mcu) + return -ENOMEM; + + mcu->client = client; + i2c_set_clientdata(client, mcu); + + err = omnia_mcu_read_features(mcu); + if (err) + return dev_err_probe(dev, err, + "Cannot determine MCU supported features\n"); + + if (mcu->features & FEAT_BOARD_INFO) { + err = omnia_mcu_read_board_info(mcu); + if (err) + return dev_err_probe(dev, err, + "Cannot read board info\n"); + } + + return 0; +} + +static const struct of_device_id of_omnia_mcu_match[] = { + { .compatible = "cznic,turris-omnia-mcu" }, + {} +}; + +static struct i2c_driver omnia_mcu_driver = { + .probe = omnia_mcu_probe, + .driver = { + .name = "turris-omnia-mcu", + .of_match_table = of_omnia_mcu_match, + .dev_groups = omnia_mcu_groups, + }, +}; +module_i2c_driver(omnia_mcu_driver); + +MODULE_AUTHOR("Marek Behun "); +MODULE_DESCRIPTION("CZ.NIC's Turris Omnia MCU"); +MODULE_LICENSE("GPL"); diff --git a/drivers/platform/cznic/turris-omnia-mcu.h b/drivers/platform/cznic/turris-omnia-mcu.h new file mode 100644 index 000000000000..5b21fbca8fe1 --- /dev/null +++ b/drivers/platform/cznic/turris-omnia-mcu.h @@ -0,0 +1,50 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * CZ.NIC's Turris Omnia MCU driver + * + * 2024 by Marek Behún + */ + +#ifndef __TURRIS_OMNIA_MCU_H +#define __TURRIS_OMNIA_MCU_H + +#include +#include +#include +#include + +struct omnia_mcu { + struct i2c_client *client; + const char *type; + u32 features; + + /* board information */ + u64 board_serial_number; + u8 board_first_mac[ETH_ALEN]; + u8 board_revision; +}; + +int omnia_cmd_read(const struct i2c_client *client, u8 cmd, void *reply, + unsigned int len); + +static inline int omnia_cmd_read_u16(const struct i2c_client *client, u8 cmd) +{ + __le16 reply; + int err; + + err = omnia_cmd_read(client, cmd, &reply, sizeof(reply)); + + return err ?: le16_to_cpu(reply); +} + +static inline int omnia_cmd_read_u8(const struct i2c_client *client, u8 cmd) +{ + u8 reply; + int err; + + err = omnia_cmd_read(client, cmd, &reply, sizeof(reply)); + + return err ?: reply; +} + +#endif /* __TURRIS_OMNIA_MCU_H */ diff --git a/include/linux/turris-omnia-mcu-interface.h b/include/linux/turris-omnia-mcu-interface.h new file mode 100644 index 000000000000..88f8490b5897 --- /dev/null +++ b/include/linux/turris-omnia-mcu-interface.h @@ -0,0 +1,249 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * CZ.NIC's Turris Omnia MCU I2C interface commands definitions + * + * 2024 by Marek Behún + */ + +#ifndef __TURRIS_OMNIA_MCU_INTERFACE_H +#define __TURRIS_OMNIA_MCU_INTERFACE_H + +#include +#include + +enum omnia_commands_e { + CMD_GET_STATUS_WORD = 0x01, /* slave sends status word back */ + CMD_GENERAL_CONTROL = 0x02, + CMD_LED_MODE = 0x03, /* default/user */ + CMD_LED_STATE = 0x04, /* LED on/off */ + CMD_LED_COLOR = 0x05, /* LED number + RED + GREEN + BLUE */ + CMD_USER_VOLTAGE = 0x06, + CMD_SET_BRIGHTNESS = 0x07, + CMD_GET_BRIGHTNESS = 0x08, + CMD_GET_RESET = 0x09, + CMD_GET_FW_VERSION_APP = 0x0A, /* 20B git hash number */ + CMD_SET_WATCHDOG_STATE = 0x0B, /* 0 - disable + * 1 - enable / ping + * after boot watchdog is started + * with 2 minutes timeout + */ + + /* CMD_WATCHDOG_STATUS = 0x0C, not implemented anymore */ + + CMD_GET_WATCHDOG_STATE = 0x0D, + CMD_GET_FW_VERSION_BOOT = 0x0E, /* 20B git hash number */ + CMD_GET_FW_CHECKSUM = 0x0F, /* 4B length, 4B checksum */ + + /* available if FEATURES_SUPPORTED bit set in status word */ + CMD_GET_FEATURES = 0x10, + + /* available if EXT_CMD bit set in features */ + CMD_GET_EXT_STATUS_DWORD = 0x11, + CMD_EXT_CONTROL = 0x12, + CMD_GET_EXT_CONTROL_STATUS = 0x13, + + /* available if NEW_INT_API bit set in features */ + CMD_GET_INT_AND_CLEAR = 0x14, + CMD_GET_INT_MASK = 0x15, + CMD_SET_INT_MASK = 0x16, + + /* available if FLASHING bit set in features */ + CMD_FLASH = 0x19, + + /* available if WDT_PING bit set in features */ + CMD_SET_WDT_TIMEOUT = 0x20, + CMD_GET_WDT_TIMELEFT = 0x21, + + /* available if POWEROFF_WAKEUP bit set in features */ + CMD_SET_WAKEUP = 0x22, + CMD_GET_UPTIME_AND_WAKEUP = 0x23, + CMD_POWER_OFF = 0x24, + + /* available if USB_OVC_PROT_SETTING bit set in features */ + CMD_SET_USB_OVC_PROT = 0x25, + CMD_GET_USB_OVC_PROT = 0x26, + + /* available if TRNG bit set in features */ + CMD_TRNG_COLLECT_ENTROPY = 0x28, + + /* available if CRYPTO bit set in features */ + CMD_CRYPTO_GET_PUBLIC_KEY = 0x29, + CMD_CRYPTO_SIGN_MESSAGE = 0x2A, + CMD_CRYPTO_COLLECT_SIGNATURE = 0x2B, + + /* available if BOARD_INFO it set in features */ + CMD_BOARD_INFO_GET = 0x2C, + CMD_BOARD_INFO_BURN = 0x2D, + + /* available only at address 0x2b (led-controller) */ + /* available only if LED_GAMMA_CORRECTION bit set in features */ + CMD_SET_GAMMA_CORRECTION = 0x30, + CMD_GET_GAMMA_CORRECTION = 0x31, + + /* available only at address 0x2b (led-controller) */ + /* available only if PER_LED_CORRECTION bit set in features */ + /* available only if FROM_BIT_16_INVALID bit NOT set in features */ + CMD_SET_LED_CORRECTIONS = 0x32, + CMD_GET_LED_CORRECTIONS = 0x33, +}; + +enum omnia_flashing_commands_e { + FLASH_CMD_UNLOCK = 0x01, + FLASH_CMD_SIZE_AND_CSUM = 0x02, + FLASH_CMD_PROGRAM = 0x03, + FLASH_CMD_RESET = 0x04, +}; + +enum omnia_sts_word_e { + STS_MCU_TYPE_MASK = GENMASK(1, 0), + STS_MCU_TYPE_STM32 = 0 << 0, + STS_MCU_TYPE_GD32 = 1 << 0, + STS_MCU_TYPE_MKL = 2 << 0, + STS_FEATURES_SUPPORTED = BIT(2), + STS_USER_REGULATOR_NOT_SUPPORTED = BIT(3), + STS_CARD_DET = BIT(4), + STS_MSATA_IND = BIT(5), + STS_USB30_OVC = BIT(6), + STS_USB31_OVC = BIT(7), + STS_USB30_PWRON = BIT(8), + STS_USB31_PWRON = BIT(9), + STS_ENABLE_4V5 = BIT(10), + STS_BUTTON_MODE = BIT(11), + STS_BUTTON_PRESSED = BIT(12), + STS_BUTTON_COUNTER_MASK = GENMASK(15, 13) +}; + +enum omnia_ctl_byte_e { + CTL_LIGHT_RST = BIT(0), + CTL_HARD_RST = BIT(1), + /* BIT(2) is currently reserved */ + CTL_USB30_PWRON = BIT(3), + CTL_USB31_PWRON = BIT(4), + CTL_ENABLE_4V5 = BIT(5), + CTL_BUTTON_MODE = BIT(6), + CTL_BOOTLOADER = BIT(7) +}; + +enum omnia_features_e { + FEAT_PERIPH_MCU = BIT(0), + FEAT_EXT_CMDS = BIT(1), + FEAT_WDT_PING = BIT(2), + FEAT_LED_STATE_EXT_MASK = GENMASK(4, 3), + FEAT_LED_STATE_EXT = 1 << 3, + FEAT_LED_STATE_EXT_V32 = 2 << 3, + FEAT_LED_GAMMA_CORRECTION = BIT(5), + FEAT_NEW_INT_API = BIT(6), + FEAT_BOOTLOADER = BIT(7), + FEAT_FLASHING = BIT(8), + FEAT_NEW_MESSAGE_API = BIT(9), + FEAT_BRIGHTNESS_INT = BIT(10), + FEAT_POWEROFF_WAKEUP = BIT(11), + FEAT_CAN_OLD_MESSAGE_API = BIT(12), + FEAT_TRNG = BIT(13), + FEAT_CRYPTO = BIT(14), + FEAT_BOARD_INFO = BIT(15), + + /* + * Orginally the features command replied only 16 bits. If more were + * read, either the I2C transaction failed or 0xff bytes were sent. + * Therefore to consider bits 16 - 31 valid, one bit (20) was reserved + * to be zero. + */ + + /* Bits 16 - 19 correspond to bits 0 - 3 of status word */ + FEAT_MCU_TYPE_MASK = GENMASK(17, 16), + FEAT_MCU_TYPE_STM32 = 0 << 16, + FEAT_MCU_TYPE_GD32 = 1 << 16, + FEAT_MCU_TYPE_MKL = 2 << 16, + FEAT_FEATURES_SUPPORTED = BIT(18), + FEAT_USER_REGULATOR_NOT_SUPPORTED = BIT(19), + + /* must not be set */ + FEAT_FROM_BIT_16_INVALID = BIT(20), + + FEAT_PER_LED_CORRECTION = BIT(21), + FEAT_USB_OVC_PROT_SETTING = BIT(22), +}; + +enum omnia_ext_sts_dword_e { + EXT_STS_SFP_nDET = BIT(0), + EXT_STS_LED_STATES_MASK = GENMASK(31, 12), + EXT_STS_WLAN0_MSATA_LED = BIT(12), + EXT_STS_WLAN1_LED = BIT(13), + EXT_STS_WLAN2_LED = BIT(14), + EXT_STS_WPAN0_LED = BIT(15), + EXT_STS_WPAN1_LED = BIT(16), + EXT_STS_WPAN2_LED = BIT(17), + EXT_STS_WAN_LED0 = BIT(18), + EXT_STS_WAN_LED1 = BIT(19), + EXT_STS_LAN0_LED0 = BIT(20), + EXT_STS_LAN0_LED1 = BIT(21), + EXT_STS_LAN1_LED0 = BIT(22), + EXT_STS_LAN1_LED1 = BIT(23), + EXT_STS_LAN2_LED0 = BIT(24), + EXT_STS_LAN2_LED1 = BIT(25), + EXT_STS_LAN3_LED0 = BIT(26), + EXT_STS_LAN3_LED1 = BIT(27), + EXT_STS_LAN4_LED0 = BIT(28), + EXT_STS_LAN4_LED1 = BIT(29), + EXT_STS_LAN5_LED0 = BIT(30), + EXT_STS_LAN5_LED1 = BIT(31), +}; + +enum omnia_ext_ctl_e { + EXT_CTL_nRES_MMC = BIT(0), + EXT_CTL_nRES_LAN = BIT(1), + EXT_CTL_nRES_PHY = BIT(2), + EXT_CTL_nPERST0 = BIT(3), + EXT_CTL_nPERST1 = BIT(4), + EXT_CTL_nPERST2 = BIT(5), + EXT_CTL_PHY_SFP = BIT(6), + EXT_CTL_PHY_SFP_AUTO = BIT(7), + EXT_CTL_nVHV_CTRL = BIT(8), +}; + +enum omnia_int_e { + INT_CARD_DET = BIT(0), + INT_MSATA_IND = BIT(1), + INT_USB30_OVC = BIT(2), + INT_USB31_OVC = BIT(3), + INT_BUTTON_PRESSED = BIT(4), + INT_SFP_nDET = BIT(5), + INT_BRIGHTNESS_CHANGED = BIT(6), + INT_TRNG = BIT(7), + INT_MESSAGE_SIGNED = BIT(8), + + INT_LED_STATES_MASK = GENMASK(31, 12), + INT_WLAN0_MSATA_LED = BIT(12), + INT_WLAN1_LED = BIT(13), + INT_WLAN2_LED = BIT(14), + INT_WPAN0_LED = BIT(15), + INT_WPAN1_LED = BIT(16), + INT_WPAN2_LED = BIT(17), + INT_WAN_LED0 = BIT(18), + INT_WAN_LED1 = BIT(19), + INT_LAN0_LED0 = BIT(20), + INT_LAN0_LED1 = BIT(21), + INT_LAN1_LED0 = BIT(22), + INT_LAN1_LED1 = BIT(23), + INT_LAN2_LED0 = BIT(24), + INT_LAN2_LED1 = BIT(25), + INT_LAN3_LED0 = BIT(26), + INT_LAN3_LED1 = BIT(27), + INT_LAN4_LED0 = BIT(28), + INT_LAN4_LED1 = BIT(29), + INT_LAN5_LED0 = BIT(30), + INT_LAN5_LED1 = BIT(31), +}; + +enum omnia_cmd_poweroff_e { + CMD_POWER_OFF_POWERON_BUTTON = BIT(0), + CMD_POWER_OFF_MAGIC = 0xdead, +}; + +enum cmd_usb_ovc_prot_e { + CMD_xET_USB_OVC_PROT_PORT_MASK = GENMASK(3, 0), + CMD_xET_USB_OVC_PROT_ENABLE = BIT(4), +}; + +#endif /* __TURRIS_OMNIA_MCU_INTERFACE_H */ From patchwork Wed Apr 24 17:38:02 2024 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 8bit X-Patchwork-Submitter: =?utf-8?q?Marek_Beh=C3=BAn?= X-Patchwork-Id: 13642279 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from smtp.kernel.org (aws-us-west-2-korg-mail-1.web.codeaurora.org [10.30.226.201]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.lore.kernel.org (Postfix) with ESMTPS id 3A3A8C07E8E for ; Wed, 24 Apr 2024 17:38:29 +0000 (UTC) Received: by smtp.kernel.org (Postfix) id 232E7C2BD10; Wed, 24 Apr 2024 17:38:29 +0000 (UTC) Received: by smtp.kernel.org (Postfix) with ESMTPSA id 9EC1BC2BD11; Wed, 24 Apr 2024 17:38:26 +0000 (UTC) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/simple; d=kernel.org; s=k20201202; t=1713980309; bh=68+48FdzYSgGP79lZnrGa1IsOHs91EaXJ2dRnBc8atg=; h=From:List-Id:To:Cc:Subject:Date:In-Reply-To:References:From; b=sogKvAtYFmdqcTX5LQ1yZltxOTJof/n0XaMJe7vkurl7WsvIEV41blQxHsqWqJXrR aMUjvkznqWEoDTKkQYnKWxxvpktNaeVqzE9yMa8u4kpgVtcWHerZz2/wNsYCXvNFeu EJHK9CdxKpu7BHJu+kv/KZylv2sDnhXdfYugeh8luhzFikZcv0HDdiYHPLd616mLbN uriIewK96x3lcwqDrqQjzqKjxqpBBcM8dT6eRQ0svNj5zyFnTw0Sgzb+g6NU06mO3N ihFJoG+7LR9KU+KPZPpcVvaLbPdjE69i+ptGCo8UkR45zb5Eh/m/ArpybM6xSdSlbo sB+PFb/NyDZ6g== From: =?utf-8?q?Marek_Beh=C3=BAn?= List-Id: To: Gregory CLEMENT , Arnd Bergmann , soc@kernel.org, arm@kernel.org, Andy Shevchenko , Hans de Goede , =?utf-8?q?Ilpo_J=C3=A4rvinen?= , Linus Walleij , Bartosz Golaszewski , linux-gpio@vger.kernel.org Cc: =?utf-8?q?Marek_Beh=C3=BAn?= Subject: [PATCH v7 3/9] platform: cznic: turris-omnia-mcu: Add support for MCU connected GPIOs Date: Wed, 24 Apr 2024 19:38:02 +0200 Message-ID: <20240424173809.7214-4-kabel@kernel.org> X-Mailer: git-send-email 2.43.2 In-Reply-To: <20240424173809.7214-1-kabel@kernel.org> References: <20240424173809.7214-1-kabel@kernel.org> MIME-Version: 1.0 Add support for GPIOs connected to the MCU on the Turris Omnia board. This includes: - front button pin - enable pins for USB regulators - MiniPCIe / mSATA card presence pins in MiniPCIe port 0 - LED output pins from WAN ethernet PHY, LAN switch and MiniPCIe ports - on board revisions 32+ also various peripheral resets and another voltage regulator enable pin Signed-off-by: Marek Behún --- .../sysfs-bus-i2c-devices-turris-omnia-mcu | 16 + drivers/platform/cznic/Kconfig | 15 + drivers/platform/cznic/Makefile | 1 + .../platform/cznic/turris-omnia-mcu-base.c | 33 +- .../platform/cznic/turris-omnia-mcu-gpio.c | 1047 +++++++++++++++++ drivers/platform/cznic/turris-omnia-mcu.h | 69 +- 6 files changed, 1165 insertions(+), 16 deletions(-) create mode 100644 drivers/platform/cznic/turris-omnia-mcu-gpio.c diff --git a/Documentation/ABI/testing/sysfs-bus-i2c-devices-turris-omnia-mcu b/Documentation/ABI/testing/sysfs-bus-i2c-devices-turris-omnia-mcu index ff5e7cb00206..b27b60d00c87 100644 --- a/Documentation/ABI/testing/sysfs-bus-i2c-devices-turris-omnia-mcu +++ b/Documentation/ABI/testing/sysfs-bus-i2c-devices-turris-omnia-mcu @@ -22,6 +22,22 @@ Description: (RO) Contains device first MAC address. Each Turris Omnia is Format: %pM. +What: /sys/bus/i2c/devices//front_button_mode +Date: July 2024 +KernelVersion: 6.10 +Contact: Marek Behún +Description: (RW) The front button on the Turris Omnia router can be + configured either to change the intensity of all the LEDs on the + front panel, or to send the press event to the CPU as an + interrupt. + + This file switches between these two modes: + - "mcu" makes the button press event be handled by the MCU to + change the LEDs panel intensity. + - "cpu" makes the button press event be handled by the CPU. + + Format: %s. + What: /sys/bus/i2c/devices//fw_features Date: July 2024 KernelVersion: 6.10 diff --git a/drivers/platform/cznic/Kconfig b/drivers/platform/cznic/Kconfig index f8560ff9c1af..3a8c3edcd7e6 100644 --- a/drivers/platform/cznic/Kconfig +++ b/drivers/platform/cznic/Kconfig @@ -17,9 +17,24 @@ config TURRIS_OMNIA_MCU tristate "Turris Omnia MCU driver" depends on MACH_ARMADA_38X || COMPILE_TEST depends on I2C + select GPIOLIB + select GPIOLIB_IRQCHIP help Say Y here to add support for the features implemented by the microcontroller on the CZ.NIC's Turris Omnia SOHO router. + The features include: + - GPIO pins + - to get front button press events (the front button can be + configured either to generate press events to the CPU or to change + front LEDs panel brightness) + - to enable / disable USB port voltage regulators and to detect + USB overcurrent + - to detect MiniPCIe / mSATA card presence in MiniPCIe port 0 + - to configure resets of various peripherals on board revisions 32+ + - to enable / disable the VHV voltage regulator to the SOC in order + to be able to program SOC's OTP on board revisions 32+ + - to get input from the LED output pins of the WAN ethernet PHY, LAN + switch and MiniPCIe ports To compile this driver as a module, choose M here; the module will be called turris-omnia-mcu. diff --git a/drivers/platform/cznic/Makefile b/drivers/platform/cznic/Makefile index 31adca73bb94..53fd8f1777a3 100644 --- a/drivers/platform/cznic/Makefile +++ b/drivers/platform/cznic/Makefile @@ -2,3 +2,4 @@ obj-$(CONFIG_TURRIS_OMNIA_MCU) += turris-omnia-mcu.o turris-omnia-mcu-y := turris-omnia-mcu-base.o +turris-omnia-mcu-y += turris-omnia-mcu-gpio.o diff --git a/drivers/platform/cznic/turris-omnia-mcu-base.c b/drivers/platform/cznic/turris-omnia-mcu-base.c index 8893c990853a..708b084cb5da 100644 --- a/drivers/platform/cznic/turris-omnia-mcu-base.c +++ b/drivers/platform/cznic/turris-omnia-mcu-base.c @@ -22,25 +22,31 @@ #define OMNIA_FW_VERSION_HEX_LEN (2 * OMNIA_FW_VERSION_LEN + 1) #define OMNIA_BOARD_INFO_LEN 16 -int omnia_cmd_read(const struct i2c_client *client, u8 cmd, void *reply, - unsigned int len) +int omnia_cmd_write_read(const struct i2c_client *client, + void *cmd, unsigned int cmd_len, + void *reply, unsigned int reply_len) { struct i2c_msg msgs[2]; - int ret; + int ret, num; msgs[0].addr = client->addr; msgs[0].flags = 0; - msgs[0].len = 1; - msgs[0].buf = &cmd; - msgs[1].addr = client->addr; - msgs[1].flags = I2C_M_RD; - msgs[1].len = len; - msgs[1].buf = reply; - - ret = i2c_transfer(client->adapter, msgs, ARRAY_SIZE(msgs)); + msgs[0].len = cmd_len; + msgs[0].buf = cmd; + num = 1; + + if (reply_len) { + msgs[1].addr = client->addr; + msgs[1].flags = I2C_M_RD; + msgs[1].len = reply_len; + msgs[1].buf = reply; + num++; + } + + ret = i2c_transfer(client->adapter, msgs, num); if (ret < 0) return ret; - if (ret != ARRAY_SIZE(msgs)) + if (ret != num) return -EIO; return 0; @@ -188,6 +194,7 @@ static const struct attribute_group omnia_mcu_base_group = { static const struct attribute_group *omnia_mcu_groups[] = { &omnia_mcu_base_group, + &omnia_mcu_gpio_group, NULL }; @@ -353,7 +360,7 @@ static int omnia_mcu_probe(struct i2c_client *client) "Cannot read board info\n"); } - return 0; + return omnia_mcu_register_gpiochip(mcu); } static const struct of_device_id of_omnia_mcu_match[] = { diff --git a/drivers/platform/cznic/turris-omnia-mcu-gpio.c b/drivers/platform/cznic/turris-omnia-mcu-gpio.c new file mode 100644 index 000000000000..b3b203f0d2b9 --- /dev/null +++ b/drivers/platform/cznic/turris-omnia-mcu-gpio.c @@ -0,0 +1,1047 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * CZ.NIC's Turris Omnia MCU GPIO and IRQ driver + * + * 2024 by Marek Behún + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "turris-omnia-mcu.h" + +#define CMD_INT_ARG_LEN 8 +#define FRONT_BUTTON_RELEASE_DELAY 50 /* ms */ + +static const char * const omnia_mcu_gpio_templates[64] = { + /* GPIOs with value read from the 16-bit wide status */ + [4] = "gpio%u.MiniPCIe0 Card Detect", + [5] = "gpio%u.MiniPCIe0 mSATA Indicator", + [6] = "gpio%u.Front USB3 port over-current", + [7] = "gpio%u.Rear USB3 port over-current", + [8] = "gpio%u.Front USB3 port power", + [9] = "gpio%u.Rear USB3 port power", + [12] = "gpio%u.Front Button", + + /* GPIOs with value read from the 32-bit wide extended status */ + [16] = "gpio%u.SFP nDET", + [28] = "gpio%u.MiniPCIe0 LED", + [29] = "gpio%u.MiniPCIe1 LED", + [30] = "gpio%u.MiniPCIe2 LED", + [31] = "gpio%u.MiniPCIe0 PAN LED", + [32] = "gpio%u.MiniPCIe1 PAN LED", + [33] = "gpio%u.MiniPCIe2 PAN LED", + [34] = "gpio%u.WAN PHY LED0", + [35] = "gpio%u.WAN PHY LED1", + [36] = "gpio%u.LAN switch p0 LED0", + [37] = "gpio%u.LAN switch p0 LED1", + [38] = "gpio%u.LAN switch p1 LED0", + [39] = "gpio%u.LAN switch p1 LED1", + [40] = "gpio%u.LAN switch p2 LED0", + [41] = "gpio%u.LAN switch p2 LED1", + [42] = "gpio%u.LAN switch p3 LED0", + [43] = "gpio%u.LAN switch p3 LED1", + [44] = "gpio%u.LAN switch p4 LED0", + [45] = "gpio%u.LAN switch p4 LED1", + [46] = "gpio%u.LAN switch p5 LED0", + [47] = "gpio%u.LAN switch p5 LED1", + + /* GPIOs with value read from the 16-bit wide extended control status */ + [48] = "gpio%u.eMMC nRESET", + [49] = "gpio%u.LAN switch nRESET", + [50] = "gpio%u.WAN PHY nRESET", + [51] = "gpio%u.MiniPCIe0 nPERST", + [52] = "gpio%u.MiniPCIe1 nPERST", + [53] = "gpio%u.MiniPCIe2 nPERST", + [54] = "gpio%u.WAN PHY SFP mux", +}; + +#define _DEF_GPIO(_cmd, _ctl_cmd, _bit, _ctl_bit, _int_bit, _feat, _feat_mask) \ + { \ + .cmd = _cmd, \ + .ctl_cmd = _ctl_cmd, \ + .bit = _bit, \ + .ctl_bit = _ctl_bit, \ + .int_bit = _int_bit, \ + .feat = _feat, \ + .feat_mask = _feat_mask, \ + } +#define _DEF_GPIO_STS(_name) \ + _DEF_GPIO(CMD_GET_STATUS_WORD, 0, STS_ ## _name, 0, INT_ ## _name, 0, 0) +#define _DEF_GPIO_CTL(_name) \ + _DEF_GPIO(CMD_GET_STATUS_WORD, CMD_GENERAL_CONTROL, STS_ ## _name, \ + CTL_ ## _name, 0, 0, 0) +#define _DEF_GPIO_EXT_STS(_name, _feat) \ + _DEF_GPIO(CMD_GET_EXT_STATUS_DWORD, 0, EXT_STS_ ## _name, 0, \ + INT_ ## _name, FEAT_ ## _feat | FEAT_EXT_CMDS, \ + FEAT_ ## _feat | FEAT_EXT_CMDS) +#define _DEF_GPIO_EXT_STS_LED(_name, _ledext) \ + _DEF_GPIO(CMD_GET_EXT_STATUS_DWORD, 0, EXT_STS_ ## _name, 0, \ + INT_ ## _name, FEAT_LED_STATE_ ## _ledext, \ + FEAT_LED_STATE_EXT_MASK) +#define _DEF_GPIO_EXT_STS_LEDALL(_name) \ + _DEF_GPIO(CMD_GET_EXT_STATUS_DWORD, 0, EXT_STS_ ## _name, 0, \ + INT_ ## _name, FEAT_LED_STATE_EXT_MASK, 0) +#define _DEF_GPIO_EXT_CTL(_name, _feat) \ + _DEF_GPIO(CMD_GET_EXT_CONTROL_STATUS, CMD_EXT_CONTROL, \ + EXT_CTL_ ## _name, EXT_CTL_ ## _name, 0, \ + FEAT_ ## _feat | FEAT_EXT_CMDS, \ + FEAT_ ## _feat | FEAT_EXT_CMDS) +#define _DEF_INT(_name) \ + _DEF_GPIO(0, 0, 0, 0, INT_ ## _name, 0, 0) + +static const struct omnia_gpio { + u8 cmd, ctl_cmd; + u32 bit, ctl_bit; + u32 int_bit; + u16 feat, feat_mask; +} omnia_gpios[64] = { + /* GPIOs with value read from the 16-bit wide status */ + [4] = _DEF_GPIO_STS(CARD_DET), + [5] = _DEF_GPIO_STS(MSATA_IND), + [6] = _DEF_GPIO_STS(USB30_OVC), + [7] = _DEF_GPIO_STS(USB31_OVC), + [8] = _DEF_GPIO_CTL(USB30_PWRON), + [9] = _DEF_GPIO_CTL(USB31_PWRON), + + /* brightness changed interrupt, no GPIO */ + [11] = _DEF_INT(BRIGHTNESS_CHANGED), + + [12] = _DEF_GPIO_STS(BUTTON_PRESSED), + + /* TRNG interrupt, no GPIO */ + [13] = _DEF_INT(TRNG), + + /* MESSAGE_SIGNED interrupt, no GPIO */ + [14] = _DEF_INT(MESSAGE_SIGNED), + + /* GPIOs with value read from the 32-bit wide extended status */ + [16] = _DEF_GPIO_EXT_STS(SFP_nDET, PERIPH_MCU), + [28] = _DEF_GPIO_EXT_STS_LEDALL(WLAN0_MSATA_LED), + [29] = _DEF_GPIO_EXT_STS_LEDALL(WLAN1_LED), + [30] = _DEF_GPIO_EXT_STS_LEDALL(WLAN2_LED), + [31] = _DEF_GPIO_EXT_STS_LED(WPAN0_LED, EXT), + [32] = _DEF_GPIO_EXT_STS_LED(WPAN1_LED, EXT), + [33] = _DEF_GPIO_EXT_STS_LED(WPAN2_LED, EXT), + [34] = _DEF_GPIO_EXT_STS_LEDALL(WAN_LED0), + [35] = _DEF_GPIO_EXT_STS_LED(WAN_LED1, EXT_V32), + [36] = _DEF_GPIO_EXT_STS_LEDALL(LAN0_LED0), + [37] = _DEF_GPIO_EXT_STS_LEDALL(LAN0_LED1), + [38] = _DEF_GPIO_EXT_STS_LEDALL(LAN1_LED0), + [39] = _DEF_GPIO_EXT_STS_LEDALL(LAN1_LED1), + [40] = _DEF_GPIO_EXT_STS_LEDALL(LAN2_LED0), + [41] = _DEF_GPIO_EXT_STS_LEDALL(LAN2_LED1), + [42] = _DEF_GPIO_EXT_STS_LEDALL(LAN3_LED0), + [43] = _DEF_GPIO_EXT_STS_LEDALL(LAN3_LED1), + [44] = _DEF_GPIO_EXT_STS_LEDALL(LAN4_LED0), + [45] = _DEF_GPIO_EXT_STS_LEDALL(LAN4_LED1), + [46] = _DEF_GPIO_EXT_STS_LEDALL(LAN5_LED0), + [47] = _DEF_GPIO_EXT_STS_LEDALL(LAN5_LED1), + + /* GPIOs with value read from the 16-bit wide extended control status */ + [48] = _DEF_GPIO_EXT_CTL(nRES_MMC, PERIPH_MCU), + [49] = _DEF_GPIO_EXT_CTL(nRES_LAN, PERIPH_MCU), + [50] = _DEF_GPIO_EXT_CTL(nRES_PHY, PERIPH_MCU), + [51] = _DEF_GPIO_EXT_CTL(nPERST0, PERIPH_MCU), + [52] = _DEF_GPIO_EXT_CTL(nPERST1, PERIPH_MCU), + [53] = _DEF_GPIO_EXT_CTL(nPERST2, PERIPH_MCU), + [54] = _DEF_GPIO_EXT_CTL(PHY_SFP, PERIPH_MCU), +}; + +/* mapping from interrupts to indexes of GPIOs in the omnia_gpios array */ +static const u8 omnia_int_to_gpio_idx[32] = { + [__bf_shf(INT_CARD_DET)] = 4, + [__bf_shf(INT_MSATA_IND)] = 5, + [__bf_shf(INT_USB30_OVC)] = 6, + [__bf_shf(INT_USB31_OVC)] = 7, + [__bf_shf(INT_BUTTON_PRESSED)] = 12, + [__bf_shf(INT_TRNG)] = 13, + [__bf_shf(INT_MESSAGE_SIGNED)] = 14, + [__bf_shf(INT_SFP_nDET)] = 16, + [__bf_shf(INT_BRIGHTNESS_CHANGED)] = 11, + [__bf_shf(INT_WLAN0_MSATA_LED)] = 28, + [__bf_shf(INT_WLAN1_LED)] = 29, + [__bf_shf(INT_WLAN2_LED)] = 30, + [__bf_shf(INT_WPAN0_LED)] = 31, + [__bf_shf(INT_WPAN1_LED)] = 32, + [__bf_shf(INT_WPAN2_LED)] = 33, + [__bf_shf(INT_WAN_LED0)] = 34, + [__bf_shf(INT_WAN_LED1)] = 35, + [__bf_shf(INT_LAN0_LED0)] = 36, + [__bf_shf(INT_LAN0_LED1)] = 37, + [__bf_shf(INT_LAN1_LED0)] = 38, + [__bf_shf(INT_LAN1_LED1)] = 39, + [__bf_shf(INT_LAN2_LED0)] = 40, + [__bf_shf(INT_LAN2_LED1)] = 41, + [__bf_shf(INT_LAN3_LED0)] = 42, + [__bf_shf(INT_LAN3_LED1)] = 43, + [__bf_shf(INT_LAN4_LED0)] = 44, + [__bf_shf(INT_LAN4_LED1)] = 45, + [__bf_shf(INT_LAN5_LED0)] = 46, + [__bf_shf(INT_LAN5_LED1)] = 47, +}; + +/* index of PHY_SFP GPIO in the omnia_gpios array */ +#define OMNIA_GPIO_PHY_SFP_OFFSET 54 + +static int omnia_ctl_cmd_locked(struct omnia_mcu *mcu, u8 cmd, u16 val, + u16 mask) +{ + size_t len; + u8 buf[5]; + + buf[0] = cmd; + + switch (cmd) { + case CMD_GENERAL_CONTROL: + buf[1] = val; + buf[2] = mask; + len = 3; + break; + + case CMD_EXT_CONTROL: + put_unaligned_le16(val, &buf[1]); + put_unaligned_le16(mask, &buf[3]); + len = 5; + break; + + default: + BUG(); + } + + return omnia_cmd_write(mcu->client, buf, len); +} + +static int omnia_ctl_cmd(struct omnia_mcu *mcu, u8 cmd, u16 val, u16 mask) +{ + guard(mutex)(&mcu->lock); + + return omnia_ctl_cmd_locked(mcu, cmd, val, mask); +} + +static int omnia_gpio_request(struct gpio_chip *gc, unsigned int offset) +{ + if (!omnia_gpios[offset].cmd) + return -EINVAL; + + return 0; +} + +static int omnia_gpio_get_direction(struct gpio_chip *gc, unsigned int offset) +{ + struct omnia_mcu *mcu = gpiochip_get_data(gc); + + if (offset == OMNIA_GPIO_PHY_SFP_OFFSET) { + int val; + + scoped_guard(mutex, &mcu->lock) + val = omnia_cmd_read_bit(mcu->client, + CMD_GET_EXT_CONTROL_STATUS, + EXT_CTL_PHY_SFP_AUTO); + + if (val < 0) + return val; + + if (val) + return GPIO_LINE_DIRECTION_IN; + + return GPIO_LINE_DIRECTION_OUT; + } + + if (omnia_gpios[offset].ctl_cmd) + return GPIO_LINE_DIRECTION_OUT; + + return GPIO_LINE_DIRECTION_IN; +} + +static int omnia_gpio_direction_input(struct gpio_chip *gc, unsigned int offset) +{ + const struct omnia_gpio *gpio = &omnia_gpios[offset]; + struct omnia_mcu *mcu = gpiochip_get_data(gc); + + if (offset == OMNIA_GPIO_PHY_SFP_OFFSET) + return omnia_ctl_cmd(mcu, CMD_EXT_CONTROL, EXT_CTL_PHY_SFP_AUTO, + EXT_CTL_PHY_SFP_AUTO); + + if (gpio->ctl_cmd) + return -ENOTSUPP; + + return 0; +} + +static int omnia_gpio_direction_output(struct gpio_chip *gc, + unsigned int offset, int value) +{ + const struct omnia_gpio *gpio = &omnia_gpios[offset]; + struct omnia_mcu *mcu = gpiochip_get_data(gc); + u16 val, mask; + + if (!gpio->ctl_cmd) + return -ENOTSUPP; + + mask = gpio->ctl_bit; + val = value ? mask : 0; + + if (offset == OMNIA_GPIO_PHY_SFP_OFFSET) + mask |= EXT_CTL_PHY_SFP_AUTO; + + return omnia_ctl_cmd(mcu, gpio->ctl_cmd, val, mask); +} + +static int omnia_gpio_get(struct gpio_chip *gc, unsigned int offset) +{ + const struct omnia_gpio *gpio = &omnia_gpios[offset]; + struct omnia_mcu *mcu = gpiochip_get_data(gc); + + /* + * If firmware does not support the new interrupt API, we are informed + * of every change of the status word by an interrupt from MCU and save + * its value in the interrupt service routine. Simply return the saved + * value. + */ + if (gpio->cmd == CMD_GET_STATUS_WORD && + !(mcu->features & FEAT_NEW_INT_API)) + return !!(mcu->last_status & gpio->bit); + + guard(mutex)(&mcu->lock); + + /* + * If firmware does support the new interrupt API, we may have cached + * the value of a GPIO in the interrupt service routine. If not, read + * the relevant bit now. + */ + if (gpio->int_bit && (mcu->is_cached & gpio->int_bit)) + return !!(mcu->cached & gpio->int_bit); + + return omnia_cmd_read_bit(mcu->client, gpio->cmd, gpio->bit); +} + +static int omnia_gpio_get_multiple(struct gpio_chip *gc, unsigned long *mask, + unsigned long *bits) +{ + struct omnia_mcu *mcu = gpiochip_get_data(gc); + u32 sts_bits, ext_sts_bits, ext_ctl_bits; + int err, i; + + sts_bits = 0; + ext_sts_bits = 0; + ext_ctl_bits = 0; + + /* determine which bits to read from the 3 possible commands */ + for_each_set_bit(i, mask, ARRAY_SIZE(omnia_gpios)) { + if (omnia_gpios[i].cmd == CMD_GET_STATUS_WORD) + sts_bits |= omnia_gpios[i].bit; + else if (omnia_gpios[i].cmd == CMD_GET_EXT_STATUS_DWORD) + ext_sts_bits |= omnia_gpios[i].bit; + else if (omnia_gpios[i].cmd == CMD_GET_EXT_CONTROL_STATUS) + ext_ctl_bits |= omnia_gpios[i].bit; + } + + guard(mutex)(&mcu->lock); + + if (mcu->features & FEAT_NEW_INT_API) { + /* read relevant bits from status */ + err = omnia_cmd_read_bits(mcu->client, CMD_GET_STATUS_WORD, + sts_bits, &sts_bits); + if (err) + return err; + } else { + /* + * Use status word value cached in the interrupt service routine + * if firmware does not support the new interrupt API. + */ + sts_bits = mcu->last_status; + } + + /* read relevant bits from extended status */ + err = omnia_cmd_read_bits(mcu->client, CMD_GET_EXT_STATUS_DWORD, + ext_sts_bits, &ext_sts_bits); + if (err) + return err; + + /* read relevant bits from extended control */ + err = omnia_cmd_read_bits(mcu->client, CMD_GET_EXT_CONTROL_STATUS, + ext_ctl_bits, &ext_ctl_bits); + if (err) + return err; + + /* assign relevant bits in result */ + for_each_set_bit(i, mask, ARRAY_SIZE(omnia_gpios)) { + if (omnia_gpios[i].cmd == CMD_GET_STATUS_WORD) + __assign_bit(i, bits, sts_bits & omnia_gpios[i].bit); + else if (omnia_gpios[i].cmd == CMD_GET_EXT_STATUS_DWORD) + __assign_bit(i, bits, ext_sts_bits & + omnia_gpios[i].bit); + else if (omnia_gpios[i].cmd == CMD_GET_EXT_CONTROL_STATUS) + __assign_bit(i, bits, ext_ctl_bits & + omnia_gpios[i].bit); + } + + return 0; +} + +static void omnia_gpio_set(struct gpio_chip *gc, unsigned int offset, int value) +{ + const struct omnia_gpio *gpio = &omnia_gpios[offset]; + struct omnia_mcu *mcu = gpiochip_get_data(gc); + u16 val, mask; + + if (!gpio->ctl_cmd) + return; + + mask = gpio->ctl_bit; + val = value ? mask : 0; + + omnia_ctl_cmd(mcu, gpio->ctl_cmd, val, mask); +} + +static void omnia_gpio_set_multiple(struct gpio_chip *gc, unsigned long *mask, + unsigned long *bits) +{ + struct omnia_mcu *mcu = gpiochip_get_data(gc); + u16 ext_ctl, ext_ctl_mask; + u8 ctl, ctl_mask; + int i; + + ctl = 0; + ctl_mask = 0; + ext_ctl = 0; + ext_ctl_mask = 0; + + for_each_set_bit(i, mask, ARRAY_SIZE(omnia_gpios)) { + if (omnia_gpios[i].ctl_cmd == CMD_GENERAL_CONTROL) { + ctl_mask |= omnia_gpios[i].ctl_bit; + if (test_bit(i, bits)) + ctl |= omnia_gpios[i].ctl_bit; + } else if (omnia_gpios[i].ctl_cmd == CMD_EXT_CONTROL) { + ext_ctl_mask |= omnia_gpios[i].ctl_bit; + if (test_bit(i, bits)) + ext_ctl |= omnia_gpios[i].ctl_bit; + } + } + + guard(mutex)(&mcu->lock); + + if (ctl_mask) + omnia_ctl_cmd_locked(mcu, CMD_GENERAL_CONTROL, ctl, ctl_mask); + + if (ext_ctl_mask) + omnia_ctl_cmd_locked(mcu, CMD_EXT_CONTROL, ext_ctl, + ext_ctl_mask); +} + +static bool omnia_gpio_available(struct omnia_mcu *mcu, + const struct omnia_gpio *gpio) +{ + if (gpio->feat_mask) + return (mcu->features & gpio->feat_mask) == gpio->feat; + + if (gpio->feat) + return mcu->features & gpio->feat; + + return true; +} + +static int omnia_gpio_init_valid_mask(struct gpio_chip *gc, + unsigned long *valid_mask, + unsigned int ngpios) +{ + struct omnia_mcu *mcu = gpiochip_get_data(gc); + + for (unsigned int i = 0; i < ngpios; i++) { + const struct omnia_gpio *gpio = &omnia_gpios[i]; + + if (gpio->cmd || gpio->int_bit) + __assign_bit(i, valid_mask, + omnia_gpio_available(mcu, gpio)); + else + __clear_bit(i, valid_mask); + } + + return 0; +} + +static int omnia_gpio_of_xlate(struct gpio_chip *gc, + const struct of_phandle_args *gpiospec, + u32 *flags) +{ + u32 bank, gpio; + + if (WARN_ON(gpiospec->args_count != 3)) + return -EINVAL; + + if (flags) + *flags = gpiospec->args[2]; + + bank = gpiospec->args[0]; + gpio = gpiospec->args[1]; + + switch (bank) { + case 0: + return gpio < 16 ? gpio : -EINVAL; + case 1: + return gpio < 32 ? 16 + gpio : -EINVAL; + case 2: + return gpio < 16 ? 48 + gpio : -EINVAL; + default: + return -EINVAL; + } +} + +static void omnia_irq_shutdown(struct irq_data *d) +{ + struct gpio_chip *gc = irq_data_get_irq_chip_data(d); + struct omnia_mcu *mcu = gpiochip_get_data(gc); + irq_hw_number_t hwirq = irqd_to_hwirq(d); + u32 bit = omnia_gpios[hwirq].int_bit; + + mcu->rising &= ~bit; + mcu->falling &= ~bit; +} + +static void omnia_irq_mask(struct irq_data *d) +{ + struct gpio_chip *gc = irq_data_get_irq_chip_data(d); + struct omnia_mcu *mcu = gpiochip_get_data(gc); + irq_hw_number_t hwirq = irqd_to_hwirq(d); + u32 bit = omnia_gpios[hwirq].int_bit; + + if (!omnia_gpios[hwirq].cmd) + mcu->rising &= ~bit; + mcu->mask &= ~bit; + gpiochip_disable_irq(gc, hwirq); +} + +static void omnia_irq_unmask(struct irq_data *d) +{ + struct gpio_chip *gc = irq_data_get_irq_chip_data(d); + struct omnia_mcu *mcu = gpiochip_get_data(gc); + irq_hw_number_t hwirq = irqd_to_hwirq(d); + u32 bit = omnia_gpios[hwirq].int_bit; + + gpiochip_enable_irq(gc, hwirq); + mcu->mask |= bit; + if (!omnia_gpios[hwirq].cmd) + mcu->rising |= bit; +} + +static int omnia_irq_set_type(struct irq_data *d, unsigned int type) +{ + struct gpio_chip *gc = irq_data_get_irq_chip_data(d); + struct omnia_mcu *mcu = gpiochip_get_data(gc); + irq_hw_number_t hwirq = irqd_to_hwirq(d); + struct device *dev = &mcu->client->dev; + u32 bit = omnia_gpios[hwirq].int_bit; + + if (!(type & IRQ_TYPE_EDGE_BOTH)) { + dev_err(dev, "irq %u: unsupported type %u\n", d->irq, type); + return -EINVAL; + } + + if (type & IRQ_TYPE_EDGE_RISING) + mcu->rising |= bit; + else + mcu->rising &= ~bit; + + if (type & IRQ_TYPE_EDGE_FALLING) + mcu->falling |= bit; + else + mcu->falling &= ~bit; + + return 0; +} + +static void omnia_irq_bus_lock(struct irq_data *d) +{ + struct gpio_chip *gc = irq_data_get_irq_chip_data(d); + struct omnia_mcu *mcu = gpiochip_get_data(gc); + + /* nothing to do if MCU firmware does not support new interrupt API */ + if (!(mcu->features & FEAT_NEW_INT_API)) + return; + + mutex_lock(&mcu->lock); +} + +/** + * omnia_mask_interleave - Interleaves the bytes from @rising and @falling + * @dst: the destination u8 array of interleaved bytes + * @rising: rising mask + * @falling: falling mask + * + * Interleaves the little-endian bytes from @rising and @falling words. + * + * If @rising = (r0, r1, r2, r3) and @falling = (f0, f1, f2, f3), the result is + * @dst = (r0, f0, r1, f1, r2, f2, r3, f3). + * + * The MCU receives interrupt mask and reports pending interrupt bitmap int this + * interleaved format. The rationale behind it is that the low-indexed bits are + * more important - in many cases, the user will be interested only in + * interrupts with indexes 0 to 7, and so the system can stop reading after + * first 2 bytes (r0, f0), to save time on the slow I2C bus. + * + * Feel free to remove this function and its inverse, omnia_mask_deinterleave, + * and use an appropriate bitmap_* function once such a function exists. + */ +static void omnia_mask_interleave(u8 *dst, u32 rising, u32 falling) +{ + for (int i = 0; i < sizeof(u32); ++i) { + dst[2 * i] = rising >> (8 * i); + dst[2 * i + 1] = falling >> (8 * i); + } +} + +/** + * omnia_mask_deinterleave - Deinterleaves the bytes into @rising and @falling + * @src: the source u8 array containing the interleaved bytes + * @rising: pointer where to store the rising mask gathered from @src + * @falling: pointer where to store the falling mask gathered from @src + * + * This is the inverse function to omnia_mask_interleave. + */ +static void omnia_mask_deinterleave(const u8 *src, u32 *rising, u32 *falling) +{ + *rising = *falling = 0; + + for (int i = 0; i < sizeof(u32); ++i) { + *rising |= src[2 * i] << (8 * i); + *falling |= src[2 * i + 1] << (8 * i); + } +} + +static void omnia_irq_bus_sync_unlock(struct irq_data *d) +{ + struct gpio_chip *gc = irq_data_get_irq_chip_data(d); + struct omnia_mcu *mcu = gpiochip_get_data(gc); + struct device *dev = &mcu->client->dev; + u8 cmd[1 + CMD_INT_ARG_LEN]; + u32 rising, falling; + int err; + + /* nothing to do if MCU firmware does not support new interrupt API */ + if (!(mcu->features & FEAT_NEW_INT_API)) + return; + + cmd[0] = CMD_SET_INT_MASK; + + rising = mcu->rising & mcu->mask; + falling = mcu->falling & mcu->mask; + + /* interleave the rising and falling bytes into the command arguments */ + omnia_mask_interleave(&cmd[1], rising, falling); + + dev_dbg(dev, "set int mask %8ph\n", &cmd[1]); + + err = omnia_cmd_write(mcu->client, cmd, sizeof(cmd)); + if (err) { + dev_err(dev, "Cannot set mask: %d\n", err); + goto unlock; + } + + /* + * Remember which GPIOs have both rising and falling interrupts enabled. + * For those we will cache their value so that .get() method is faster. + * We also need to forget cached values of GPIOs that aren't cached + * anymore. + */ + mcu->both = rising & falling; + mcu->is_cached &= mcu->both; + +unlock: + mutex_unlock(&mcu->lock); +} + +static const struct irq_chip omnia_mcu_irq_chip = { + .name = "Turris Omnia MCU interrupts", + .irq_shutdown = omnia_irq_shutdown, + .irq_mask = omnia_irq_mask, + .irq_unmask = omnia_irq_unmask, + .irq_set_type = omnia_irq_set_type, + .irq_bus_lock = omnia_irq_bus_lock, + .irq_bus_sync_unlock = omnia_irq_bus_sync_unlock, + .flags = IRQCHIP_IMMUTABLE, + GPIOCHIP_IRQ_RESOURCE_HELPERS, +}; + +static void omnia_irq_init_valid_mask(struct gpio_chip *gc, + unsigned long *valid_mask, + unsigned int ngpios) +{ + struct omnia_mcu *mcu = gpiochip_get_data(gc); + + for (unsigned int i = 0; i < ngpios; i++) { + const struct omnia_gpio *gpio = &omnia_gpios[i]; + + if (gpio->int_bit) + __assign_bit(i, valid_mask, + omnia_gpio_available(mcu, gpio)); + else + __clear_bit(i, valid_mask); + } +} + +static int omnia_irq_init_hw(struct gpio_chip *gc) +{ + struct omnia_mcu *mcu = gpiochip_get_data(gc); + u8 cmd[1 + CMD_INT_ARG_LEN] = {}; + + cmd[0] = CMD_SET_INT_MASK; + + return omnia_cmd_write(mcu->client, cmd, sizeof(cmd)); +} + +/* + * Determine how many bytes we need to read from the reply to the + * CMD_GET_INT_AND_CLEAR command in order to retrieve all unmasked interrupts. + */ +static size_t omnia_irq_compute_pending_length(u32 rising, u32 falling) +{ + size_t rlen = 0, flen = 0; + + if (rising) + rlen = ((__fls(rising) >> 3) << 1) + 1; + + if (falling) + flen = ((__fls(falling) >> 3) << 1) + 2; + + return max(rlen, flen); +} + +static bool omnia_irq_read_pending_new(struct omnia_mcu *mcu, + unsigned long *pending) +{ + struct device *dev = &mcu->client->dev; + u8 reply[CMD_INT_ARG_LEN] = {}; + u32 rising, falling; + size_t len; + int err; + + len = omnia_irq_compute_pending_length(mcu->rising & mcu->mask, + mcu->falling & mcu->mask); + if (!len) + return false; + + guard(mutex)(&mcu->lock); + + err = omnia_cmd_read(mcu->client, CMD_GET_INT_AND_CLEAR, reply, + len); + if (err) { + dev_err(dev, "Cannot read pending IRQs: %d\n", err); + return false; + } + + /* deinterleave the reply bytes into rising and falling */ + omnia_mask_deinterleave(reply, &rising, &falling); + + rising &= mcu->mask; + falling &= mcu->mask; + *pending = rising | falling; + + /* cache values for GPIOs that have both edges enabled */ + mcu->is_cached &= ~(rising & falling); + mcu->is_cached |= mcu->both & (rising ^ falling); + mcu->cached = (mcu->cached | rising) & ~falling; + + return true; +} + +static int omnia_read_status_word_old_fw(struct omnia_mcu *mcu, u16 *status) +{ + int ret; + + ret = omnia_cmd_read_u16(mcu->client, CMD_GET_STATUS_WORD); + if (ret < 0) + return ret; + + /* + * Old firmware has a bug wherein it never resets the USB port + * overcurrent bits back to zero. Ignore them. + */ + *status = ret & ~(STS_USB30_OVC | STS_USB31_OVC); + + return 0; +} + +static void button_release_emul_fn(struct work_struct *work) +{ + struct omnia_mcu *mcu = container_of(to_delayed_work(work), + struct omnia_mcu, + button_release_emul_work); + + mcu->button_pressed_emul = false; + generic_handle_irq_safe(mcu->client->irq); +} + +static void fill_int_from_sts(u32 *rising, u32 *falling, u16 rising_sts, + u16 falling_sts, u16 sts_bit, u32 int_bit) +{ + if (rising_sts & sts_bit) + *rising |= int_bit; + if (falling_sts & sts_bit) + *falling |= int_bit; +} + +static bool omnia_irq_read_pending_old(struct omnia_mcu *mcu, + unsigned long *pending) +{ + struct device *dev = &mcu->client->dev; + u16 status, rising_sts, falling_sts; + u32 rising, falling; + int ret; + + guard(mutex)(&mcu->lock); + + ret = omnia_read_status_word_old_fw(mcu, &status); + if (ret < 0) { + dev_err(dev, "Cannot read pending IRQs: %d\n", ret); + return false; + } + + /* + * The old firmware triggers an interrupt whenever status word changes, + * but does not inform about which bits rose or fell. We need to compute + * this here by comparing with the last status word value. + * + * The STS_BUTTON_PRESSED bit needs special handling, because the old + * firmware clears the STS_BUTTON_PRESSED bit on successful completion + * of the CMD_GET_STATUS_WORD command, resulting in another interrupt: + * - first we get an interrupt, we read the status word where + * STS_BUTTON_PRESSED is present, + * - MCU clears the STS_BUTTON_PRESSED bit because we read the status + * word, + * - we get another interrupt because the status word changed again + * (STS_BUTTON_PRESSED was cleared). + * + * The gpiolib-cdev, gpiolib-sysfs and gpio-keys input driver all call + * the gpiochip's .get() method after an edge event on a requested GPIO + * occurs. + * + * We ensure that the .get() method reads 1 for the button GPIO for some + * time. + */ + + if (status & STS_BUTTON_PRESSED) { + mcu->button_pressed_emul = true; + mod_delayed_work(system_wq, &mcu->button_release_emul_work, + msecs_to_jiffies(FRONT_BUTTON_RELEASE_DELAY)); + } else if (mcu->button_pressed_emul) { + status |= STS_BUTTON_PRESSED; + } + + rising_sts = ~mcu->last_status & status; + falling_sts = mcu->last_status & ~status; + + mcu->last_status = status; + + /* + * Fill in the relevant interrupt bits from status bits for CARD_DET, + * MSATA_IND and BUTTON_PRESSED. + */ + rising = 0; + falling = 0; + fill_int_from_sts(&rising, &falling, rising_sts, falling_sts, + STS_CARD_DET, INT_CARD_DET); + fill_int_from_sts(&rising, &falling, rising_sts, falling_sts, + STS_MSATA_IND, INT_MSATA_IND); + fill_int_from_sts(&rising, &falling, rising_sts, falling_sts, + STS_BUTTON_PRESSED, INT_BUTTON_PRESSED); + + /* Use only bits that are enabled */ + rising &= mcu->rising & mcu->mask; + falling &= mcu->falling & mcu->mask; + *pending = rising | falling; + + return true; +} + +static bool omnia_irq_read_pending(struct omnia_mcu *mcu, + unsigned long *pending) +{ + if (mcu->features & FEAT_NEW_INT_API) + return omnia_irq_read_pending_new(mcu, pending); + else + return omnia_irq_read_pending_old(mcu, pending); +} + +static irqreturn_t omnia_irq_thread_handler(int irq, void *dev_id) +{ + struct omnia_mcu *mcu = dev_id; + struct irq_domain *domain; + unsigned long pending; + int i; + + if (!omnia_irq_read_pending(mcu, &pending)) + return IRQ_NONE; + + domain = mcu->gc.irq.domain; + + for_each_set_bit(i, &pending, 32) { + unsigned int nested_irq; + + nested_irq = irq_find_mapping(domain, omnia_int_to_gpio_idx[i]); + + handle_nested_irq(nested_irq); + } + + return IRQ_RETVAL(pending); +} + +static const char * const front_button_modes[2] = { "mcu", "cpu" }; + +static ssize_t front_button_mode_show(struct device *dev, + struct device_attribute *a, char *buf) +{ + struct omnia_mcu *mcu = dev_get_drvdata(dev); + int val; + + if (mcu->features & FEAT_NEW_INT_API) { + val = omnia_cmd_read_bit(mcu->client, CMD_GET_STATUS_WORD, + STS_BUTTON_MODE); + if (val < 0) + return val; + } else { + val = !!(mcu->last_status & STS_BUTTON_MODE); + } + + return sysfs_emit(buf, "%s\n", front_button_modes[val]); +} + +static ssize_t front_button_mode_store(struct device *dev, + struct device_attribute *a, + const char *buf, size_t count) +{ + struct omnia_mcu *mcu = dev_get_drvdata(dev); + int err, i; + + i = sysfs_match_string(front_button_modes, buf); + if (i < 0) + return i; + + err = omnia_ctl_cmd_locked(mcu, CMD_GENERAL_CONTROL, + i ? CTL_BUTTON_MODE : 0, + CTL_BUTTON_MODE); + if (err) + return err; + + return count; +} +static DEVICE_ATTR_RW(front_button_mode); + +static struct attribute *omnia_mcu_gpio_attrs[] = { + &dev_attr_front_button_mode.attr, + NULL +}; + +const struct attribute_group omnia_mcu_gpio_group = { + .attrs = omnia_mcu_gpio_attrs, +}; + +int omnia_mcu_register_gpiochip(struct omnia_mcu *mcu) +{ + bool new_api = mcu->features & FEAT_NEW_INT_API; + struct device *dev = &mcu->client->dev; + unsigned long irqflags; + int err; + + err = devm_mutex_init(dev, &mcu->lock); + if (err) + return err; + + mcu->gc.request = omnia_gpio_request; + mcu->gc.get_direction = omnia_gpio_get_direction; + mcu->gc.direction_input = omnia_gpio_direction_input; + mcu->gc.direction_output = omnia_gpio_direction_output; + mcu->gc.get = omnia_gpio_get; + mcu->gc.get_multiple = omnia_gpio_get_multiple; + mcu->gc.set = omnia_gpio_set; + mcu->gc.set_multiple = omnia_gpio_set_multiple; + mcu->gc.init_valid_mask = omnia_gpio_init_valid_mask; + mcu->gc.can_sleep = true; + mcu->gc.names = omnia_mcu_gpio_templates; + mcu->gc.base = -1; + mcu->gc.ngpio = ARRAY_SIZE(omnia_gpios); + mcu->gc.label = "Turris Omnia MCU GPIOs"; + mcu->gc.parent = dev; + mcu->gc.owner = THIS_MODULE; + mcu->gc.of_gpio_n_cells = 3; + mcu->gc.of_xlate = omnia_gpio_of_xlate; + + gpio_irq_chip_set_chip(&mcu->gc.irq, &omnia_mcu_irq_chip); + /* This will let us handle the parent IRQ in the driver */ + mcu->gc.irq.parent_handler = NULL; + mcu->gc.irq.num_parents = 0; + mcu->gc.irq.parents = NULL; + mcu->gc.irq.default_type = IRQ_TYPE_NONE; + mcu->gc.irq.handler = handle_bad_irq; + mcu->gc.irq.threaded = true; + if (new_api) + mcu->gc.irq.init_hw = omnia_irq_init_hw; + mcu->gc.irq.init_valid_mask = omnia_irq_init_valid_mask; + + err = devm_gpiochip_add_data(dev, &mcu->gc, mcu); + if (err) + return dev_err_probe(dev, err, "Cannot add GPIO chip\n"); + + /* + * Before requesting the interrupt, if firmware does not support the new + * interrupt API, we need to cache the value of the status word, so that + * when it changes, we may compare the new value with the cached one in + * the interrupt handler. + */ + if (!new_api) { + err = omnia_read_status_word_old_fw(mcu, &mcu->last_status); + if (err < 0) + return dev_err_probe(dev, err, + "Cannot read status word\n"); + + INIT_DELAYED_WORK(&mcu->button_release_emul_work, + button_release_emul_fn); + } + + irqflags = IRQF_ONESHOT; + if (new_api) + irqflags |= IRQF_TRIGGER_LOW; + else + irqflags |= IRQF_TRIGGER_FALLING; + + err = devm_request_threaded_irq(dev, mcu->client->irq, NULL, + omnia_irq_thread_handler, irqflags, + "turris-omnia-mcu", mcu); + if (err) + return dev_err_probe(dev, err, "Cannot request IRQ\n"); + + if (!new_api) { + /* + * The button_release_emul_work has to be initialized before the + * thread is requested, and on driver remove it needs to be + * canceled before the thread is freed. Therefore we can't use + * devm_delayed_work_autocancel() directly, because the order + * devm_delayed_work_autocancel(); + * devm_request_threaded_irq(); + * would cause improper release order: + * free_irq(); + * cancel_delayed_work_sync(); + * Instead we first initialize the work above, and only now + * after IRQ is requested we add the work devm action. + */ + err = devm_add_action(dev, devm_delayed_work_drop, + &mcu->button_release_emul_work); + if (err) + return err; + } + + return 0; +} diff --git a/drivers/platform/cznic/turris-omnia-mcu.h b/drivers/platform/cznic/turris-omnia-mcu.h index 5b21fbca8fe1..e8d9bf1c8fdc 100644 --- a/drivers/platform/cznic/turris-omnia-mcu.h +++ b/drivers/platform/cznic/turris-omnia-mcu.h @@ -8,9 +8,12 @@ #ifndef __TURRIS_OMNIA_MCU_H #define __TURRIS_OMNIA_MCU_H -#include +#include +#include #include +#include #include +#include #include struct omnia_mcu { @@ -22,10 +25,66 @@ struct omnia_mcu { u64 board_serial_number; u8 board_first_mac[ETH_ALEN]; u8 board_revision; + + /* GPIO chip */ + struct gpio_chip gc; + struct mutex lock; + u32 mask, rising, falling, both, cached, is_cached; + /* Old MCU firmware handling needs the following */ + struct delayed_work button_release_emul_work; + u16 last_status; + bool button_pressed_emul; }; -int omnia_cmd_read(const struct i2c_client *client, u8 cmd, void *reply, - unsigned int len); +int omnia_cmd_write_read(const struct i2c_client *client, + void *cmd, unsigned int cmd_len, + void *reply, unsigned int reply_len); + +static inline int omnia_cmd_write(const struct i2c_client *client, void *cmd, + size_t len) +{ + return omnia_cmd_write_read(client, cmd, len, NULL, 0); +} + +static inline int omnia_cmd_read(const struct i2c_client *client, u8 cmd, + void *reply, unsigned int len) +{ + return omnia_cmd_write_read(client, &cmd, 1, reply, len); +} + +/* Returns 0 on success */ +static inline int omnia_cmd_read_bits(const struct i2c_client *client, u8 cmd, + u32 bits, u32 *dst) +{ + __le32 reply; + int err; + + if (!bits) { + *dst = 0; + return 0; + } + + err = omnia_cmd_read(client, cmd, &reply, (__fls(bits) >> 3) + 1); + if (err) + return err; + + *dst = le32_to_cpu(reply) & bits; + + return 0; +} + +static inline int omnia_cmd_read_bit(const struct i2c_client *client, u8 cmd, + u32 bit) +{ + u32 reply; + int err; + + err = omnia_cmd_read_bits(client, cmd, bit, &reply); + if (err) + return err; + + return !!reply; +} static inline int omnia_cmd_read_u16(const struct i2c_client *client, u8 cmd) { @@ -47,4 +106,8 @@ static inline int omnia_cmd_read_u8(const struct i2c_client *client, u8 cmd) return err ?: reply; } +extern const struct attribute_group omnia_mcu_gpio_group; + +int omnia_mcu_register_gpiochip(struct omnia_mcu *mcu); + #endif /* __TURRIS_OMNIA_MCU_H */ From patchwork Wed Apr 24 17:38:03 2024 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 8bit X-Patchwork-Submitter: =?utf-8?q?Marek_Beh=C3=BAn?= X-Patchwork-Id: 13642280 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from smtp.kernel.org (aws-us-west-2-korg-mail-1.web.codeaurora.org [10.30.226.201]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.lore.kernel.org (Postfix) with ESMTPS id 3522BC4345F for ; Wed, 24 Apr 2024 17:38:32 +0000 (UTC) Received: by smtp.kernel.org (Postfix) id 275ACC2BD10; Wed, 24 Apr 2024 17:38:32 +0000 (UTC) Received: by smtp.kernel.org (Postfix) with ESMTPSA id 787C3C3277B; Wed, 24 Apr 2024 17:38:29 +0000 (UTC) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/simple; d=kernel.org; s=k20201202; t=1713980312; bh=nGHPRU8KnfEOU2FrE1MhEj++VkjD9iwgx6j4/7FPGdE=; h=From:List-Id:To:Cc:Subject:Date:In-Reply-To:References:From; b=aHMgkSD3686wjsaSTQRLf7gz03Ot0ZETHgUjqa5Hwz8v0mNpLYqtTNM6i8fn0ZgOf UIH6wjld73XGhzs+7kvTTO25400EQn8Qt2TqOWNxxZ3BkUhzzcXwpNLJKWGCxTMLYi qUsuqyJv5GzypJ3tU1Z69/nVngVSBLa7L8rj43n8ACKjASBexblH2bXqcCdY9Ndz5J D+LPjedJUHEaZFQM9E0X+CkISNQoRuZE0Ack0AVg6EUnjoWp7ehWdhuLrhzcQm+nWJ cwWTRErxJ6nYq7+7fct7OY+SF/GfQ6kFozyiccEqpW7h5nuN7XvAwGPjqyp3nqgI8t UrOayRbwsI5vw== From: =?utf-8?q?Marek_Beh=C3=BAn?= List-Id: To: Gregory CLEMENT , Arnd Bergmann , soc@kernel.org, arm@kernel.org, Andy Shevchenko , Hans de Goede , =?utf-8?q?Ilpo_J=C3=A4rvinen?= , Alessandro Zummo , Alexandre Belloni , Bartosz Golaszewski , Linus Walleij , linux-rtc@vger.kernel.org Cc: =?utf-8?q?Marek_Beh=C3=BAn?= Subject: [PATCH v7 4/9] platform: cznic: turris-omnia-mcu: Add support for poweroff and wakeup Date: Wed, 24 Apr 2024 19:38:03 +0200 Message-ID: <20240424173809.7214-5-kabel@kernel.org> X-Mailer: git-send-email 2.43.2 In-Reply-To: <20240424173809.7214-1-kabel@kernel.org> References: <20240424173809.7214-1-kabel@kernel.org> MIME-Version: 1.0 Add support for true board poweroff (MCU can disable all unnecessary voltage regulators) and wakeup at a specified time, implemented via a RTC driver so that the rtcwake utility can be used to configure it. Signed-off-by: Marek Behún Acked-by: Alexandre Belloni --- .../sysfs-bus-i2c-devices-turris-omnia-mcu | 16 ++ drivers/platform/cznic/Kconfig | 4 + drivers/platform/cznic/Makefile | 1 + .../platform/cznic/turris-omnia-mcu-base.c | 5 + .../cznic/turris-omnia-mcu-sys-off-wakeup.c | 258 ++++++++++++++++++ drivers/platform/cznic/turris-omnia-mcu.h | 20 ++ 6 files changed, 304 insertions(+) create mode 100644 drivers/platform/cznic/turris-omnia-mcu-sys-off-wakeup.c diff --git a/Documentation/ABI/testing/sysfs-bus-i2c-devices-turris-omnia-mcu b/Documentation/ABI/testing/sysfs-bus-i2c-devices-turris-omnia-mcu index b27b60d00c87..564119849388 100644 --- a/Documentation/ABI/testing/sysfs-bus-i2c-devices-turris-omnia-mcu +++ b/Documentation/ABI/testing/sysfs-bus-i2c-devices-turris-omnia-mcu @@ -38,6 +38,22 @@ Description: (RW) The front button on the Turris Omnia router can be Format: %s. +What: /sys/bus/i2c/devices//front_button_poweron +Date: July 2024 +KernelVersion: 6.10 +Contact: Marek Behún +Description: (RW) Newer versions of the microcontroller firmware of the + Turris Omnia router support powering off the router into true + low power mode. The router can be powered on by pressing the + front button. + + This file configures whether front button power on is enabled. + + This file is present only if the power off feature is supported + by the firmware. + + Format: %i. + What: /sys/bus/i2c/devices//fw_features Date: July 2024 KernelVersion: 6.10 diff --git a/drivers/platform/cznic/Kconfig b/drivers/platform/cznic/Kconfig index 3a8c3edcd7e6..0a752aa654fa 100644 --- a/drivers/platform/cznic/Kconfig +++ b/drivers/platform/cznic/Kconfig @@ -19,10 +19,14 @@ config TURRIS_OMNIA_MCU depends on I2C select GPIOLIB select GPIOLIB_IRQCHIP + select RTC_CLASS help Say Y here to add support for the features implemented by the microcontroller on the CZ.NIC's Turris Omnia SOHO router. The features include: + - board poweroff into true low power mode (with voltage regulators + disabled) and the ability to configure wake up from this mode (via + rtcwake) - GPIO pins - to get front button press events (the front button can be configured either to generate press events to the CPU or to change diff --git a/drivers/platform/cznic/Makefile b/drivers/platform/cznic/Makefile index 53fd8f1777a3..a185ef882e44 100644 --- a/drivers/platform/cznic/Makefile +++ b/drivers/platform/cznic/Makefile @@ -3,3 +3,4 @@ obj-$(CONFIG_TURRIS_OMNIA_MCU) += turris-omnia-mcu.o turris-omnia-mcu-y := turris-omnia-mcu-base.o turris-omnia-mcu-y += turris-omnia-mcu-gpio.o +turris-omnia-mcu-y += turris-omnia-mcu-sys-off-wakeup.o diff --git a/drivers/platform/cznic/turris-omnia-mcu-base.c b/drivers/platform/cznic/turris-omnia-mcu-base.c index 708b084cb5da..697ace090bda 100644 --- a/drivers/platform/cznic/turris-omnia-mcu-base.c +++ b/drivers/platform/cznic/turris-omnia-mcu-base.c @@ -195,6 +195,7 @@ static const struct attribute_group omnia_mcu_base_group = { static const struct attribute_group *omnia_mcu_groups[] = { &omnia_mcu_base_group, &omnia_mcu_gpio_group, + &omnia_mcu_poweroff_group, NULL }; @@ -360,6 +361,10 @@ static int omnia_mcu_probe(struct i2c_client *client) "Cannot read board info\n"); } + err = omnia_mcu_register_sys_off_and_wakeup(mcu); + if (err) + return err; + return omnia_mcu_register_gpiochip(mcu); } diff --git a/drivers/platform/cznic/turris-omnia-mcu-sys-off-wakeup.c b/drivers/platform/cznic/turris-omnia-mcu-sys-off-wakeup.c new file mode 100644 index 000000000000..fbd1b4cd7011 --- /dev/null +++ b/drivers/platform/cznic/turris-omnia-mcu-sys-off-wakeup.c @@ -0,0 +1,258 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * CZ.NIC's Turris Omnia MCU system off and RTC wakeup driver + * + * This is not a true RTC driver (in the sense that it does not provide a + * real-time clock), rather the MCU implements a wakeup from powered off state + * at a specified time relative to MCU boot, and we expose this feature via RTC + * alarm, so that it can be used via the rtcwake command, which is the standard + * Linux command for this. + * + * 2024 by Marek Behún + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +#include "turris-omnia-mcu.h" + +static int omnia_get_uptime_wakeup(const struct i2c_client *client, u32 *uptime, + u32 *wakeup) +{ + __le32 reply[2]; + int err; + + err = omnia_cmd_read(client, CMD_GET_UPTIME_AND_WAKEUP, reply, + sizeof(reply)); + if (err) + return err; + + if (uptime) + *uptime = le32_to_cpu(reply[0]); + + if (wakeup) + *wakeup = le32_to_cpu(reply[1]); + + return 0; +} + +static int omnia_read_time(struct device *dev, struct rtc_time *tm) +{ + u32 uptime; + int err; + + err = omnia_get_uptime_wakeup(to_i2c_client(dev), &uptime, NULL); + if (err) + return err; + + rtc_time64_to_tm(uptime, tm); + + return 0; +} + +static int omnia_read_alarm(struct device *dev, struct rtc_wkalrm *alrm) +{ + struct i2c_client *client = to_i2c_client(dev); + struct omnia_mcu *mcu = i2c_get_clientdata(client); + u32 wakeup; + int err; + + err = omnia_get_uptime_wakeup(client, NULL, &wakeup); + if (err) + return err; + + alrm->enabled = !!wakeup; + rtc_time64_to_tm(wakeup ?: mcu->rtc_alarm, &alrm->time); + + return 0; +} + +static int omnia_set_alarm(struct device *dev, struct rtc_wkalrm *alrm) +{ + struct i2c_client *client = to_i2c_client(dev); + struct omnia_mcu *mcu = i2c_get_clientdata(client); + + mcu->rtc_alarm = rtc_tm_to_time64(&alrm->time); + + if (alrm->enabled) + return omnia_cmd_write_u32(client, CMD_SET_WAKEUP, + mcu->rtc_alarm); + + return 0; +} + +static int omnia_alarm_irq_enable(struct device *dev, unsigned int enabled) +{ + struct i2c_client *client = to_i2c_client(dev); + struct omnia_mcu *mcu = i2c_get_clientdata(client); + + return omnia_cmd_write_u32(client, CMD_SET_WAKEUP, + enabled ? mcu->rtc_alarm : 0); +} + +static const struct rtc_class_ops omnia_rtc_ops = { + .read_time = omnia_read_time, + .read_alarm = omnia_read_alarm, + .set_alarm = omnia_set_alarm, + .alarm_irq_enable = omnia_alarm_irq_enable, +}; + +static int omnia_power_off(struct sys_off_data *data) +{ + struct omnia_mcu *mcu = data->cb_data; + __be32 tmp; + u8 cmd[9]; + u16 arg; + int err; + + if (mcu->front_button_poweron) + arg = CMD_POWER_OFF_POWERON_BUTTON; + else + arg = 0; + + cmd[0] = CMD_POWER_OFF; + put_unaligned_le16(CMD_POWER_OFF_MAGIC, &cmd[1]); + put_unaligned_le16(arg, &cmd[3]); + + /* + * Although all values from and to MCU are passed in little-endian, the + * MCU's CRC unit uses big-endian CRC32 polynomial (0x04c11db7), so we + * need to use crc32_be() here. + */ + tmp = cpu_to_be32(get_unaligned_le32(&cmd[1])); + put_unaligned_le32(crc32_be(0xffffffff, (void *)&tmp, sizeof(tmp)), + &cmd[5]); + + err = omnia_cmd_write(mcu->client, cmd, sizeof(cmd)); + if (err) + dev_err(&mcu->client->dev, + "Unable to send the poweroff command: %d\n", err); + + return NOTIFY_DONE; +} + +static int omnia_restart(struct sys_off_data *data) +{ + struct omnia_mcu *mcu = data->cb_data; + u8 cmd[3]; + int err; + + cmd[0] = CMD_GENERAL_CONTROL; + + if (reboot_mode == REBOOT_HARD) + cmd[1] = cmd[2] = CTL_HARD_RST; + else + cmd[1] = cmd[2] = CTL_LIGHT_RST; + + err = omnia_cmd_write(mcu->client, cmd, sizeof(cmd)); + if (err) + dev_err(&mcu->client->dev, + "Unable to send the restart command: %d\n", err); + + /* + * MCU needs a little bit to process the I2C command, otherwise it will + * do a light reset based on SOC SYSRES_OUT pin. + */ + mdelay(1); + + return NOTIFY_DONE; +} + +static ssize_t front_button_poweron_show(struct device *dev, + struct device_attribute *a, char *buf) +{ + struct omnia_mcu *mcu = dev_get_drvdata(dev); + + return sysfs_emit(buf, "%d\n", mcu->front_button_poweron); +} + +static ssize_t front_button_poweron_store(struct device *dev, + struct device_attribute *a, + const char *buf, size_t count) +{ + struct omnia_mcu *mcu = dev_get_drvdata(dev); + bool val; + int err; + + err = kstrtobool(buf, &val); + if (err) + return err; + + mcu->front_button_poweron = val; + + return count; +} +static DEVICE_ATTR_RW(front_button_poweron); + +static struct attribute *omnia_mcu_poweroff_attrs[] = { + &dev_attr_front_button_poweron.attr, + NULL +}; + +static umode_t poweroff_attrs_visible(struct kobject *kobj, struct attribute *a, + int n) +{ + struct device *dev = kobj_to_dev(kobj); + struct omnia_mcu *mcu = dev_get_drvdata(dev); + + if (mcu->features & FEAT_POWEROFF_WAKEUP) + return a->mode; + + return 0; +} + +const struct attribute_group omnia_mcu_poweroff_group = { + .attrs = omnia_mcu_poweroff_attrs, + .is_visible = poweroff_attrs_visible, +}; + +int omnia_mcu_register_sys_off_and_wakeup(struct omnia_mcu *mcu) +{ + struct device *dev = &mcu->client->dev; + int err; + + /* MCU restart is always available */ + err = devm_register_sys_off_handler(dev, SYS_OFF_MODE_RESTART, + SYS_OFF_PRIO_FIRMWARE, + omnia_restart, mcu); + if (err) + return dev_err_probe(dev, err, + "Cannot register system restart handler\n"); + + /* + * Poweroff and wakeup are available only if POWEROFF_WAKEUP feature is + * present. + */ + if (!(mcu->features & FEAT_POWEROFF_WAKEUP)) + return 0; + + err = devm_register_sys_off_handler(dev, SYS_OFF_MODE_POWER_OFF, + SYS_OFF_PRIO_FIRMWARE, + omnia_power_off, mcu); + if (err) + return dev_err_probe(dev, err, + "Cannot register system power off handler\n"); + + mcu->rtcdev = devm_rtc_allocate_device(dev); + if (IS_ERR(mcu->rtcdev)) + return dev_err_probe(dev, PTR_ERR(mcu->rtcdev), + "Cannot allocate RTC device\n"); + + mcu->rtcdev->ops = &omnia_rtc_ops; + mcu->rtcdev->range_max = U32_MAX; + set_bit(RTC_FEATURE_ALARM_WAKEUP_ONLY, mcu->rtcdev->features); + + err = devm_rtc_register_device(mcu->rtcdev); + if (err) + return dev_err_probe(dev, err, "Cannot register RTC device\n"); + + mcu->front_button_poweron = true; + + return 0; +} diff --git a/drivers/platform/cznic/turris-omnia-mcu.h b/drivers/platform/cznic/turris-omnia-mcu.h index e8d9bf1c8fdc..6179a4f2069e 100644 --- a/drivers/platform/cznic/turris-omnia-mcu.h +++ b/drivers/platform/cznic/turris-omnia-mcu.h @@ -12,9 +12,11 @@ #include #include #include +#include #include #include #include +#include struct omnia_mcu { struct i2c_client *client; @@ -34,6 +36,11 @@ struct omnia_mcu { struct delayed_work button_release_emul_work; u16 last_status; bool button_pressed_emul; + + /* RTC device for configuring wake-up */ + struct rtc_device *rtcdev; + u32 rtc_alarm; + bool front_button_poweron; }; int omnia_cmd_write_read(const struct i2c_client *client, @@ -46,6 +53,17 @@ static inline int omnia_cmd_write(const struct i2c_client *client, void *cmd, return omnia_cmd_write_read(client, cmd, len, NULL, 0); } +static inline int omnia_cmd_write_u32(const struct i2c_client *client, u8 cmd, + u32 val) +{ + u8 buf[5]; + + buf[0] = cmd; + put_unaligned_le32(val, &buf[1]); + + return omnia_cmd_write(client, buf, sizeof(buf)); +} + static inline int omnia_cmd_read(const struct i2c_client *client, u8 cmd, void *reply, unsigned int len) { @@ -107,7 +125,9 @@ static inline int omnia_cmd_read_u8(const struct i2c_client *client, u8 cmd) } extern const struct attribute_group omnia_mcu_gpio_group; +extern const struct attribute_group omnia_mcu_poweroff_group; int omnia_mcu_register_gpiochip(struct omnia_mcu *mcu); +int omnia_mcu_register_sys_off_and_wakeup(struct omnia_mcu *mcu); #endif /* __TURRIS_OMNIA_MCU_H */ From patchwork Wed Apr 24 17:38:04 2024 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 8bit X-Patchwork-Submitter: =?utf-8?q?Marek_Beh=C3=BAn?= X-Patchwork-Id: 13642281 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from smtp.kernel.org (aws-us-west-2-korg-mail-1.web.codeaurora.org [10.30.226.201]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.lore.kernel.org (Postfix) with ESMTPS id 3B046C07E8E for ; Wed, 24 Apr 2024 17:38:35 +0000 (UTC) Received: by smtp.kernel.org (Postfix) id 2D3A2C113CD; Wed, 24 Apr 2024 17:38:35 +0000 (UTC) Received: by smtp.kernel.org (Postfix) with ESMTPSA id 7D0F8C2BD11; Wed, 24 Apr 2024 17:38:32 +0000 (UTC) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/simple; d=kernel.org; s=k20201202; t=1713980315; bh=6QQgO4OE8g0J20HWgsYfEmJIjE2p894ZlU8e2pvS5Fw=; h=From:List-Id:To:Cc:Subject:Date:In-Reply-To:References:From; b=Yh6CPFI4PHF38xc0w6Nf7sAF6pBGdQdK61Fy5ySnR9z9BHuS7VVdn08nq/w1gkxEf gcqGG561Fe3QdbiZZCV19eKOsVP69eS1Xa0nd6okSQSHegiiZp1rI2S12CYC/K6JuP gw7u089hDenJKxI5MHV6KVjb7sv0Oo6VcpUGIfokEemM4DTAc2zKqg9RSS5Z0EpRK1 6Z4otZUzgS7TZYxB8o+aJYE42zXXjyMCMcPXQSjFUWFQskVpstQSDRBON8SMArAHgA QdrOpTBJDLO2R4CqFcJFotuEy+nZausn0Pq41l/IGmZr8hVTeIFAV17ga4aGd2IY6r c580hjWfLH9zg== From: =?utf-8?q?Marek_Beh=C3=BAn?= List-Id: To: Gregory CLEMENT , Arnd Bergmann , soc@kernel.org, arm@kernel.org, Andy Shevchenko , Hans de Goede , =?utf-8?q?Ilpo_J=C3=A4rvinen?= , Bartosz Golaszewski , Guenter Roeck , Linus Walleij , linux-watchdog@vger.kernel.org, Wim Van Sebroeck Cc: =?utf-8?q?Marek_Beh=C3=BAn?= Subject: [PATCH v7 5/9] platform: cznic: turris-omnia-mcu: Add support for MCU watchdog Date: Wed, 24 Apr 2024 19:38:04 +0200 Message-ID: <20240424173809.7214-6-kabel@kernel.org> X-Mailer: git-send-email 2.43.2 In-Reply-To: <20240424173809.7214-1-kabel@kernel.org> References: <20240424173809.7214-1-kabel@kernel.org> MIME-Version: 1.0 Add support for the watchdog mechanism provided by the MCU. Signed-off-by: Marek Behún --- drivers/platform/cznic/Kconfig | 2 + drivers/platform/cznic/Makefile | 1 + .../platform/cznic/turris-omnia-mcu-base.c | 4 + .../cznic/turris-omnia-mcu-watchdog.c | 123 ++++++++++++++++++ drivers/platform/cznic/turris-omnia-mcu.h | 24 ++++ 5 files changed, 154 insertions(+) create mode 100644 drivers/platform/cznic/turris-omnia-mcu-watchdog.c diff --git a/drivers/platform/cznic/Kconfig b/drivers/platform/cznic/Kconfig index 0a752aa654fa..e2649cdecc38 100644 --- a/drivers/platform/cznic/Kconfig +++ b/drivers/platform/cznic/Kconfig @@ -20,6 +20,7 @@ config TURRIS_OMNIA_MCU select GPIOLIB select GPIOLIB_IRQCHIP select RTC_CLASS + select WATCHDOG_CORE help Say Y here to add support for the features implemented by the microcontroller on the CZ.NIC's Turris Omnia SOHO router. @@ -27,6 +28,7 @@ config TURRIS_OMNIA_MCU - board poweroff into true low power mode (with voltage regulators disabled) and the ability to configure wake up from this mode (via rtcwake) + - MCU watchdog - GPIO pins - to get front button press events (the front button can be configured either to generate press events to the CPU or to change diff --git a/drivers/platform/cznic/Makefile b/drivers/platform/cznic/Makefile index a185ef882e44..687f7718c0a1 100644 --- a/drivers/platform/cznic/Makefile +++ b/drivers/platform/cznic/Makefile @@ -4,3 +4,4 @@ obj-$(CONFIG_TURRIS_OMNIA_MCU) += turris-omnia-mcu.o turris-omnia-mcu-y := turris-omnia-mcu-base.o turris-omnia-mcu-y += turris-omnia-mcu-gpio.o turris-omnia-mcu-y += turris-omnia-mcu-sys-off-wakeup.o +turris-omnia-mcu-y += turris-omnia-mcu-watchdog.o diff --git a/drivers/platform/cznic/turris-omnia-mcu-base.c b/drivers/platform/cznic/turris-omnia-mcu-base.c index 697ace090bda..5f88119d825c 100644 --- a/drivers/platform/cznic/turris-omnia-mcu-base.c +++ b/drivers/platform/cznic/turris-omnia-mcu-base.c @@ -365,6 +365,10 @@ static int omnia_mcu_probe(struct i2c_client *client) if (err) return err; + err = omnia_mcu_register_watchdog(mcu); + if (err) + return err; + return omnia_mcu_register_gpiochip(mcu); } diff --git a/drivers/platform/cznic/turris-omnia-mcu-watchdog.c b/drivers/platform/cznic/turris-omnia-mcu-watchdog.c new file mode 100644 index 000000000000..b0de9585da84 --- /dev/null +++ b/drivers/platform/cznic/turris-omnia-mcu-watchdog.c @@ -0,0 +1,123 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * CZ.NIC's Turris Omnia MCU watchdog driver + * + * 2024 by Marek Behún + */ + +#include +#include +#include +#include +#include + +#include "turris-omnia-mcu.h" + +#define WATCHDOG_TIMEOUT 120 + +static unsigned int timeout; +module_param(timeout, int, 0); +MODULE_PARM_DESC(timeout, "Watchdog timeout in seconds"); + +static bool nowayout = WATCHDOG_NOWAYOUT; +module_param(nowayout, bool, 0); +MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" + __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); + +static int omnia_wdt_start(struct watchdog_device *wdt) +{ + struct omnia_mcu *mcu = watchdog_get_drvdata(wdt); + + return omnia_cmd_write_u8(mcu->client, CMD_SET_WATCHDOG_STATE, 1); +} + +static int omnia_wdt_stop(struct watchdog_device *wdt) +{ + struct omnia_mcu *mcu = watchdog_get_drvdata(wdt); + + return omnia_cmd_write_u8(mcu->client, CMD_SET_WATCHDOG_STATE, 0); +} + +static int omnia_wdt_ping(struct watchdog_device *wdt) +{ + struct omnia_mcu *mcu = watchdog_get_drvdata(wdt); + + return omnia_cmd_write_u8(mcu->client, CMD_SET_WATCHDOG_STATE, 1); +} + +static int omnia_wdt_set_timeout(struct watchdog_device *wdt, + unsigned int timeout) +{ + struct omnia_mcu *mcu = watchdog_get_drvdata(wdt); + + return omnia_cmd_write_u16(mcu->client, CMD_SET_WDT_TIMEOUT, + timeout * 10); +} + +static unsigned int omnia_wdt_get_timeleft(struct watchdog_device *wdt) +{ + struct omnia_mcu *mcu = watchdog_get_drvdata(wdt); + int ret; + + ret = omnia_cmd_read_u16(mcu->client, CMD_GET_WDT_TIMELEFT); + if (ret < 0) { + dev_err(&mcu->client->dev, "Cannot get watchdog timeleft: %d\n", + ret); + return 0; + } + + return ret / 10; +} + +static const struct watchdog_info omnia_wdt_info = { + .options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING | WDIOF_MAGICCLOSE, + .identity = "Turris Omnia MCU Watchdog", +}; + +static const struct watchdog_ops omnia_wdt_ops = { + .owner = THIS_MODULE, + .start = omnia_wdt_start, + .stop = omnia_wdt_stop, + .ping = omnia_wdt_ping, + .set_timeout = omnia_wdt_set_timeout, + .get_timeleft = omnia_wdt_get_timeleft, +}; + +int omnia_mcu_register_watchdog(struct omnia_mcu *mcu) +{ + struct device *dev = &mcu->client->dev; + int ret; + + if (!(mcu->features & FEAT_WDT_PING)) + return 0; + + mcu->wdt.info = &omnia_wdt_info; + mcu->wdt.ops = &omnia_wdt_ops; + mcu->wdt.parent = dev; + mcu->wdt.min_timeout = 1; + mcu->wdt.max_timeout = 6553; /* 65535 deciseconds */ + + mcu->wdt.timeout = WATCHDOG_TIMEOUT; + watchdog_init_timeout(&mcu->wdt, timeout, dev); + + watchdog_set_drvdata(&mcu->wdt, mcu); + + omnia_wdt_set_timeout(&mcu->wdt, mcu->wdt.timeout); + + ret = omnia_cmd_read_u8(mcu->client, CMD_GET_WATCHDOG_STATE); + if (ret < 0) + return dev_err_probe(dev, ret, + "Cannot get MCU watchdog state\n"); + + if (ret) + set_bit(WDOG_HW_RUNNING, &mcu->wdt.status); + + watchdog_set_nowayout(&mcu->wdt, nowayout); + watchdog_stop_on_reboot(&mcu->wdt); + ret = devm_watchdog_register_device(dev, &mcu->wdt); + if (ret) + return dev_err_probe(dev, ret, + "Cannot register MCU watchdog\n"); + + return 0; +} diff --git a/drivers/platform/cznic/turris-omnia-mcu.h b/drivers/platform/cznic/turris-omnia-mcu.h index 6179a4f2069e..1838cb3d636e 100644 --- a/drivers/platform/cznic/turris-omnia-mcu.h +++ b/drivers/platform/cznic/turris-omnia-mcu.h @@ -14,6 +14,7 @@ #include #include #include +#include #include #include #include @@ -41,6 +42,9 @@ struct omnia_mcu { struct rtc_device *rtcdev; u32 rtc_alarm; bool front_button_poweron; + + /* MCU watchdog */ + struct watchdog_device wdt; }; int omnia_cmd_write_read(const struct i2c_client *client, @@ -53,6 +57,25 @@ static inline int omnia_cmd_write(const struct i2c_client *client, void *cmd, return omnia_cmd_write_read(client, cmd, len, NULL, 0); } +static inline int omnia_cmd_write_u8(const struct i2c_client *client, u8 cmd, + u8 val) +{ + u8 buf[2] = { cmd, val }; + + return omnia_cmd_write(client, buf, sizeof(buf)); +} + +static inline int omnia_cmd_write_u16(const struct i2c_client *client, u8 cmd, + u16 val) +{ + u8 buf[3]; + + buf[0] = cmd; + put_unaligned_le16(val, &buf[1]); + + return omnia_cmd_write(client, buf, sizeof(buf)); +} + static inline int omnia_cmd_write_u32(const struct i2c_client *client, u8 cmd, u32 val) { @@ -129,5 +152,6 @@ extern const struct attribute_group omnia_mcu_poweroff_group; int omnia_mcu_register_gpiochip(struct omnia_mcu *mcu); int omnia_mcu_register_sys_off_and_wakeup(struct omnia_mcu *mcu); +int omnia_mcu_register_watchdog(struct omnia_mcu *mcu); #endif /* __TURRIS_OMNIA_MCU_H */ From patchwork Wed Apr 24 17:38:05 2024 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 8bit X-Patchwork-Submitter: =?utf-8?q?Marek_Beh=C3=BAn?= X-Patchwork-Id: 13642282 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from smtp.kernel.org (aws-us-west-2-korg-mail-1.web.codeaurora.org [10.30.226.201]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.lore.kernel.org (Postfix) with ESMTPS id 14AFFC4345F for ; Wed, 24 Apr 2024 17:38:38 +0000 (UTC) Received: by smtp.kernel.org (Postfix) id 077F3C2BD10; Wed, 24 Apr 2024 17:38:38 +0000 (UTC) Received: by smtp.kernel.org (Postfix) with ESMTPSA id 82D45C3277B; Wed, 24 Apr 2024 17:38:35 +0000 (UTC) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/simple; d=kernel.org; s=k20201202; t=1713980317; bh=r8q+5nwdMrub8YWLAH/EykxXTbm/unpj1QOtSspH4GQ=; h=From:List-Id:To:Cc:Subject:Date:In-Reply-To:References:From; b=qB9j2yXwv3Q7Uma8W4Q+zke21Jo6evXqdFBLMngx+lsiHQFKoZiALp02boMSqYhlI aJpaG8jRtPUDYk5Tl59/75wUj5K3BWx8eTPcsDoz/Us/bjCrW0Cr8gM8rGm/FGoLOY NA0gKDzU0Fh4hFWxAKXZGz4zEeVvrGxwnL/SwUn4SbnSnSbGus6WwpSgBDubVNGCv4 MLEmCoiALeG8O3yoka7z1y6Q13CrHNwKVLu/DXXcZnp7CnIlSYuicE4slWr6hYJBnS mFf9ZzVo59Xf9CiKXPzbq+SsUtJs+KcAgAXnEWrFoe/wRvcMHQuwjnqhSgI3uxyryc 9BWIThrP7SkOw== From: =?utf-8?q?Marek_Beh=C3=BAn?= List-Id: To: Gregory CLEMENT , Arnd Bergmann , soc@kernel.org, arm@kernel.org, Andy Shevchenko , Hans de Goede , =?utf-8?q?Ilpo_J=C3=A4rvinen?= , Olivia Mackall , Herbert Xu , Greg Kroah-Hartman , linux-crypto@vger.kernel.org Cc: =?utf-8?q?Marek_Beh=C3=BAn?= Subject: [PATCH v7 6/9] platform: cznic: turris-omnia-mcu: Add support for MCU provided TRNG Date: Wed, 24 Apr 2024 19:38:05 +0200 Message-ID: <20240424173809.7214-7-kabel@kernel.org> X-Mailer: git-send-email 2.43.2 In-Reply-To: <20240424173809.7214-1-kabel@kernel.org> References: <20240424173809.7214-1-kabel@kernel.org> MIME-Version: 1.0 Add support for true random number generator provided by the MCU. New Omnia boards come without the Atmel SHA204-A chip. Instead the crypto functionality is provided by new microcontroller, which has a TRNG peripheral. Signed-off-by: Marek Behún Signed-off-by: Marek Behún --- drivers/platform/cznic/Kconfig | 2 + drivers/platform/cznic/Makefile | 1 + .../platform/cznic/turris-omnia-mcu-base.c | 6 +- .../platform/cznic/turris-omnia-mcu-gpio.c | 2 +- .../platform/cznic/turris-omnia-mcu-trng.c | 109 ++++++++++++++++++ drivers/platform/cznic/turris-omnia-mcu.h | 8 ++ 6 files changed, 126 insertions(+), 2 deletions(-) create mode 100644 drivers/platform/cznic/turris-omnia-mcu-trng.c diff --git a/drivers/platform/cznic/Kconfig b/drivers/platform/cznic/Kconfig index e2649cdecc38..750d5f47dba8 100644 --- a/drivers/platform/cznic/Kconfig +++ b/drivers/platform/cznic/Kconfig @@ -19,6 +19,7 @@ config TURRIS_OMNIA_MCU depends on I2C select GPIOLIB select GPIOLIB_IRQCHIP + select HW_RANDOM select RTC_CLASS select WATCHDOG_CORE help @@ -28,6 +29,7 @@ config TURRIS_OMNIA_MCU - board poweroff into true low power mode (with voltage regulators disabled) and the ability to configure wake up from this mode (via rtcwake) + - true random number generator (if available on the MCU) - MCU watchdog - GPIO pins - to get front button press events (the front button can be diff --git a/drivers/platform/cznic/Makefile b/drivers/platform/cznic/Makefile index 687f7718c0a1..eae4c6b341ff 100644 --- a/drivers/platform/cznic/Makefile +++ b/drivers/platform/cznic/Makefile @@ -4,4 +4,5 @@ obj-$(CONFIG_TURRIS_OMNIA_MCU) += turris-omnia-mcu.o turris-omnia-mcu-y := turris-omnia-mcu-base.o turris-omnia-mcu-y += turris-omnia-mcu-gpio.o turris-omnia-mcu-y += turris-omnia-mcu-sys-off-wakeup.o +turris-omnia-mcu-y += turris-omnia-mcu-trng.o turris-omnia-mcu-y += turris-omnia-mcu-watchdog.o diff --git a/drivers/platform/cznic/turris-omnia-mcu-base.c b/drivers/platform/cznic/turris-omnia-mcu-base.c index 5f88119d825c..7fe4a3df93a6 100644 --- a/drivers/platform/cznic/turris-omnia-mcu-base.c +++ b/drivers/platform/cznic/turris-omnia-mcu-base.c @@ -369,7 +369,11 @@ static int omnia_mcu_probe(struct i2c_client *client) if (err) return err; - return omnia_mcu_register_gpiochip(mcu); + err = omnia_mcu_register_gpiochip(mcu); + if (err) + return err; + + return omnia_mcu_register_trng(mcu); } static const struct of_device_id of_omnia_mcu_match[] = { diff --git a/drivers/platform/cznic/turris-omnia-mcu-gpio.c b/drivers/platform/cznic/turris-omnia-mcu-gpio.c index b3b203f0d2b9..625018ca82cc 100644 --- a/drivers/platform/cznic/turris-omnia-mcu-gpio.c +++ b/drivers/platform/cznic/turris-omnia-mcu-gpio.c @@ -162,7 +162,7 @@ static const struct omnia_gpio { }; /* mapping from interrupts to indexes of GPIOs in the omnia_gpios array */ -static const u8 omnia_int_to_gpio_idx[32] = { +const u8 omnia_int_to_gpio_idx[32] = { [__bf_shf(INT_CARD_DET)] = 4, [__bf_shf(INT_MSATA_IND)] = 5, [__bf_shf(INT_USB30_OVC)] = 6, diff --git a/drivers/platform/cznic/turris-omnia-mcu-trng.c b/drivers/platform/cznic/turris-omnia-mcu-trng.c new file mode 100644 index 000000000000..a9ac36b570e9 --- /dev/null +++ b/drivers/platform/cznic/turris-omnia-mcu-trng.c @@ -0,0 +1,109 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * CZ.NIC's Turris Omnia MCU TRNG driver + * + * 2024 by Marek Behún + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "turris-omnia-mcu.h" + +#define CMD_TRNG_MAX_ENTROPY_LEN 64 + +static irqreturn_t omnia_trng_irq_handler(int irq, void *dev_id) +{ + struct omnia_mcu *mcu = dev_id; + + complete(&mcu->trng_completion); + + return IRQ_HANDLED; +} + +static int omnia_trng_read(struct hwrng *rng, void *data, size_t max, bool wait) +{ + struct omnia_mcu *mcu = (struct omnia_mcu *)rng->priv; + u8 reply[1 + CMD_TRNG_MAX_ENTROPY_LEN]; + int err, bytes; + + if (!wait && !completion_done(&mcu->trng_completion)) + return 0; + + do { + if (wait_for_completion_interruptible(&mcu->trng_completion)) + return -EINTR; + + err = omnia_cmd_read(mcu->client, CMD_TRNG_COLLECT_ENTROPY, + reply, sizeof(reply)); + if (err) + return err; + + bytes = min3(reply[0], max, CMD_TRNG_MAX_ENTROPY_LEN); + } while (wait && !bytes); + + memcpy(data, &reply[1], bytes); + + return bytes; +} + +static void omnia_irq_mapping_drop(void *res) +{ + irq_dispose_mapping((unsigned int)(unsigned long)res); +} + +int omnia_mcu_register_trng(struct omnia_mcu *mcu) +{ + struct device *dev = &mcu->client->dev; + u8 irq_idx, dummy; + int irq, err; + + if (!(mcu->features & FEAT_TRNG)) + return 0; + + irq_idx = omnia_int_to_gpio_idx[__bf_shf(INT_TRNG)]; + irq = gpiod_to_irq(gpiochip_get_desc(&mcu->gc, irq_idx)); + if (irq < 0) + return dev_err_probe(dev, irq, "Cannot get TRNG IRQ\n"); + + err = devm_add_action_or_reset(dev, omnia_irq_mapping_drop, + (void *)(unsigned long)irq); + if (err) + return err; + + /* If someone else cleared the TRNG interrupt but did not read the + * entropy, a new interrupt won't be generated, and entropy collection + * will be stuck. Ensure an interrupt will be generated by executing + * the collect entropy command (and discarding the result). + */ + err = omnia_cmd_read(mcu->client, CMD_TRNG_COLLECT_ENTROPY, &dummy, 1); + if (err) + return err; + + init_completion(&mcu->trng_completion); + + err = devm_request_threaded_irq(dev, irq, NULL, omnia_trng_irq_handler, + IRQF_ONESHOT, "turris-omnia-mcu-trng", + mcu); + if (err) + return dev_err_probe(dev, err, "Cannot request TRNG IRQ\n"); + + mcu->trng.name = "turris-omnia-mcu-trng"; + mcu->trng.read = omnia_trng_read; + mcu->trng.priv = (unsigned long)mcu; + + err = devm_hwrng_register(dev, &mcu->trng); + if (err) + return dev_err_probe(dev, err, "Cannot register TRNG\n"); + + return 0; +} diff --git a/drivers/platform/cznic/turris-omnia-mcu.h b/drivers/platform/cznic/turris-omnia-mcu.h index 1838cb3d636e..e0cf10f8c32e 100644 --- a/drivers/platform/cznic/turris-omnia-mcu.h +++ b/drivers/platform/cznic/turris-omnia-mcu.h @@ -9,7 +9,9 @@ #define __TURRIS_OMNIA_MCU_H #include +#include #include +#include #include #include #include @@ -45,6 +47,10 @@ struct omnia_mcu { /* MCU watchdog */ struct watchdog_device wdt; + + /* true random number generator */ + struct hwrng trng; + struct completion trng_completion; }; int omnia_cmd_write_read(const struct i2c_client *client, @@ -147,11 +153,13 @@ static inline int omnia_cmd_read_u8(const struct i2c_client *client, u8 cmd) return err ?: reply; } +extern const u8 omnia_int_to_gpio_idx[32]; extern const struct attribute_group omnia_mcu_gpio_group; extern const struct attribute_group omnia_mcu_poweroff_group; int omnia_mcu_register_gpiochip(struct omnia_mcu *mcu); int omnia_mcu_register_sys_off_and_wakeup(struct omnia_mcu *mcu); +int omnia_mcu_register_trng(struct omnia_mcu *mcu); int omnia_mcu_register_watchdog(struct omnia_mcu *mcu); #endif /* __TURRIS_OMNIA_MCU_H */ From patchwork Wed Apr 24 17:38:06 2024 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 8bit X-Patchwork-Submitter: =?utf-8?q?Marek_Beh=C3=BAn?= X-Patchwork-Id: 13642283 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from smtp.kernel.org (aws-us-west-2-korg-mail-1.web.codeaurora.org [10.30.226.201]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.lore.kernel.org (Postfix) with ESMTPS id BA643C10F15 for ; Wed, 24 Apr 2024 17:38:40 +0000 (UTC) Received: by smtp.kernel.org (Postfix) id AB1F6C113CD; Wed, 24 Apr 2024 17:38:40 +0000 (UTC) Received: by smtp.kernel.org (Postfix) with ESMTPSA id 5CCB8C2BD11; Wed, 24 Apr 2024 17:38:38 +0000 (UTC) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/simple; d=kernel.org; s=k20201202; t=1713980320; bh=b8cJ7GZTA3vp4406azNbmUk/nwbxFYYH2ylOogOO2Iw=; h=From:List-Id:To:Cc:Subject:Date:In-Reply-To:References:From; b=g1bWJ5w1qMluLrDVmQI0u3hP6x0hx78GtSxBeO4MfyYyvFYnE/8ixH/rc4ve0M/Lw rPdQsOu5J9lG3vD6vKwISnpd4ahlXn6pXdUMRPQwwrHwbvFzVmcJlwP7ciFlIiEH/P DZDXBg63qR6TfkdSrAFvAVDenmcOVJ0s6q4M4trlcMc0455714ss37vgfE+jxUZ5SZ SAfCDkntFBRCTc9b+bKkxqmcZV2u6bVB7J0Rtyzrg50NgIF8H8B2yT09gLMnlr82aT gVX4CkaP81nD+yMi7fP0+2p/p65y1/POys9nH2Zq3qzLeDuuYBfZPhMhgYzZ79G4Tw LTCUrv8OYljkA== From: =?utf-8?q?Marek_Beh=C3=BAn?= List-Id: To: Gregory CLEMENT , Arnd Bergmann , soc@kernel.org, arm@kernel.org, Andy Shevchenko , Hans de Goede , =?utf-8?q?Ilpo_J=C3=A4rvinen?= , Greg Kroah-Hartman , linux-crypto@vger.kernel.org, Dan Carpenter Cc: =?utf-8?q?Marek_Beh=C3=BAn?= Subject: [PATCH v7 7/9] platform: cznic: turris-omnia-mcu: Add support for digital message signing via debugfs Date: Wed, 24 Apr 2024 19:38:06 +0200 Message-ID: <20240424173809.7214-8-kabel@kernel.org> X-Mailer: git-send-email 2.43.2 In-Reply-To: <20240424173809.7214-1-kabel@kernel.org> References: <20240424173809.7214-1-kabel@kernel.org> MIME-Version: 1.0 Add support for digital message signing with private key stored in the MCU. Boards with MKL MCUs have a NIST256p ECDSA private key created when manufactured. The private key is not readable from the MCU, but MCU allows for signing messages with it and retrieving the public key. As described in a similar commit 50524d787de3 ("firmware: turris-mox-rwtm: support ECDSA signatures via debugfs"): The optimal solution would be to register an akcipher provider via kernel's crypto API, but crypto API does not yet support accessing akcipher API from userspace (and probably won't for some time, see https://www.spinics.net/lists/linux-crypto/msg38388.html). Therefore we add support for accessing this signature generation mechanism via debugfs for now, so that userspace can access it. Signed-off-by: Marek Behún --- .../ABI/testing/debugfs-turris-omnia-mcu | 13 ++ .../sysfs-bus-i2c-devices-turris-omnia-mcu | 13 ++ MAINTAINERS | 1 + drivers/platform/cznic/Kconfig | 2 + drivers/platform/cznic/Makefile | 1 + .../platform/cznic/turris-omnia-mcu-base.c | 45 +++- .../platform/cznic/turris-omnia-mcu-debugfs.c | 216 ++++++++++++++++++ drivers/platform/cznic/turris-omnia-mcu.h | 23 ++ 8 files changed, 313 insertions(+), 1 deletion(-) create mode 100644 Documentation/ABI/testing/debugfs-turris-omnia-mcu create mode 100644 drivers/platform/cznic/turris-omnia-mcu-debugfs.c diff --git a/Documentation/ABI/testing/debugfs-turris-omnia-mcu b/Documentation/ABI/testing/debugfs-turris-omnia-mcu new file mode 100644 index 000000000000..1665005c2dcd --- /dev/null +++ b/Documentation/ABI/testing/debugfs-turris-omnia-mcu @@ -0,0 +1,13 @@ +What: /sys/kernel/debug/turris-omnia-mcu/do_sign +Date: July 2024 +KernelVersion: 6.10 +Contact: Marek Behún +Description: + + ======= =========================================================== + (Write) Message to sign with the ECDSA private key stored in MCU. + The message must be exactly 32 bytes long (since this is + intended to be a SHA-256 hash). + (Read) The resulting signature, 64 bytes. This contains the R and + S values of the ECDSA signature, both in big-endian format. + ======= =========================================================== diff --git a/Documentation/ABI/testing/sysfs-bus-i2c-devices-turris-omnia-mcu b/Documentation/ABI/testing/sysfs-bus-i2c-devices-turris-omnia-mcu index 564119849388..b239224cf9bc 100644 --- a/Documentation/ABI/testing/sysfs-bus-i2c-devices-turris-omnia-mcu +++ b/Documentation/ABI/testing/sysfs-bus-i2c-devices-turris-omnia-mcu @@ -90,6 +90,19 @@ Description: (RO) Contains the microcontroller type (STM32, GD32, MKL). Format: %s. +What: /sys/bus/i2c/devices//public_key +Date: July 2024 +KernelVersion: 6.10 +Contact: Marek Behún +Description: (RO) Contains board ECDSA public key. + + Only available if MCU supports signing messages with the ECDSA + algorithm. If so, the board has a private key stored in the MCU + that was generated during manufacture and cannot be retrieved + from the MCU. + + Format: %s. + What: /sys/bus/i2c/devices//reset_selector Date: July 2024 KernelVersion: 6.10 diff --git a/MAINTAINERS b/MAINTAINERS index 513b0cd75590..8a707cd637a6 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -2139,6 +2139,7 @@ M: Marek Behún S: Maintained W: https://www.turris.cz/ F: Documentation/ABI/testing/debugfs-moxtet +F: Documentation/ABI/testing/debugfs-turris-omnia-mcu F: Documentation/ABI/testing/sysfs-bus-i2c-devices-turris-omnia-mcu F: Documentation/ABI/testing/sysfs-bus-moxtet-devices F: Documentation/ABI/testing/sysfs-firmware-turris-mox-rwtm diff --git a/drivers/platform/cznic/Kconfig b/drivers/platform/cznic/Kconfig index 750d5f47dba8..2d45495c0a2d 100644 --- a/drivers/platform/cznic/Kconfig +++ b/drivers/platform/cznic/Kconfig @@ -30,6 +30,8 @@ config TURRIS_OMNIA_MCU disabled) and the ability to configure wake up from this mode (via rtcwake) - true random number generator (if available on the MCU) + - ECDSA message signing with board private key (if available on the + MCU) - MCU watchdog - GPIO pins - to get front button press events (the front button can be diff --git a/drivers/platform/cznic/Makefile b/drivers/platform/cznic/Makefile index eae4c6b341ff..af9213928404 100644 --- a/drivers/platform/cznic/Makefile +++ b/drivers/platform/cznic/Makefile @@ -6,3 +6,4 @@ turris-omnia-mcu-y += turris-omnia-mcu-gpio.o turris-omnia-mcu-y += turris-omnia-mcu-sys-off-wakeup.o turris-omnia-mcu-y += turris-omnia-mcu-trng.o turris-omnia-mcu-y += turris-omnia-mcu-watchdog.o +turris-omnia-mcu-$(CONFIG_DEBUG_FS) += turris-omnia-mcu-debugfs.o diff --git a/drivers/platform/cznic/turris-omnia-mcu-base.c b/drivers/platform/cznic/turris-omnia-mcu-base.c index 7fe4a3df93a6..ec08443551a7 100644 --- a/drivers/platform/cznic/turris-omnia-mcu-base.c +++ b/drivers/platform/cznic/turris-omnia-mcu-base.c @@ -159,6 +159,16 @@ static ssize_t board_revision_show(struct device *dev, } static DEVICE_ATTR_RO(board_revision); +static ssize_t public_key_show(struct device *dev, struct device_attribute *a, + char *buf) +{ + struct omnia_mcu *mcu = i2c_get_clientdata(to_i2c_client(dev)); + + return sysfs_emit(buf, "%*phN\n", OMNIA_MCU_CRYPTO_PUBLIC_KEY_LEN, + mcu->board_public_key); +} +static DEVICE_ATTR_RO(public_key); + static struct attribute *omnia_mcu_base_attrs[] = { &dev_attr_fw_version_hash_application.attr, &dev_attr_fw_version_hash_bootloader.attr, @@ -168,6 +178,7 @@ static struct attribute *omnia_mcu_base_attrs[] = { &dev_attr_serial_number.attr, &dev_attr_first_mac_address.attr, &dev_attr_board_revision.attr, + &dev_attr_public_key.attr, NULL }; @@ -183,6 +194,9 @@ static umode_t omnia_mcu_base_attrs_visible(struct kobject *kobj, a == &dev_attr_board_revision.attr) && !(mcu->features & FEAT_BOARD_INFO)) mode = 0; + else if (a == &dev_attr_public_key.attr && + !(mcu->features & FEAT_CRYPTO)) + mode = 0; return mode; } @@ -333,6 +347,24 @@ static int omnia_mcu_read_board_info(struct omnia_mcu *mcu) return 0; } +static int omnia_mcu_read_public_key(struct omnia_mcu *mcu) +{ + u8 reply[1 + OMNIA_MCU_CRYPTO_PUBLIC_KEY_LEN]; + int err; + + err = omnia_cmd_read(mcu->client, CMD_CRYPTO_GET_PUBLIC_KEY, reply, + sizeof(reply)); + if (err) + return err; + + if (reply[0] != OMNIA_MCU_CRYPTO_PUBLIC_KEY_LEN) + return -EIO; + + memcpy(mcu->board_public_key, &reply[1], sizeof(mcu->board_public_key)); + + return 0; +} + static int omnia_mcu_probe(struct i2c_client *client) { struct device *dev = &client->dev; @@ -361,6 +393,13 @@ static int omnia_mcu_probe(struct i2c_client *client) "Cannot read board info\n"); } + if (mcu->features & FEAT_CRYPTO) { + err = omnia_mcu_read_public_key(mcu); + if (err) + return dev_err_probe(dev, err, + "Cannot read board public key\n"); + } + err = omnia_mcu_register_sys_off_and_wakeup(mcu); if (err) return err; @@ -373,7 +412,11 @@ static int omnia_mcu_probe(struct i2c_client *client) if (err) return err; - return omnia_mcu_register_trng(mcu); + err = omnia_mcu_register_trng(mcu); + if (err) + return err; + + return omnia_mcu_register_debugfs(mcu); } static const struct of_device_id of_omnia_mcu_match[] = { diff --git a/drivers/platform/cznic/turris-omnia-mcu-debugfs.c b/drivers/platform/cznic/turris-omnia-mcu-debugfs.c new file mode 100644 index 000000000000..585a59bb5e2e --- /dev/null +++ b/drivers/platform/cznic/turris-omnia-mcu-debugfs.c @@ -0,0 +1,216 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * CZ.NIC's Turris Omnia MCU ECDSA message signing via debugfs + * + * 2024 by Marek Behún + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "turris-omnia-mcu.h" + +#define CMD_CRYPTO_SIGN_MESSAGE_LEN 32 + +enum { + SIGN_STATE_CLOSED = 0, + SIGN_STATE_OPEN = 1, + SIGN_STATE_REQUESTED = 2, + SIGN_STATE_COLLECTED = 3, +}; + +static irqreturn_t omnia_msg_signed_irq_handler(int irq, void *dev_id) +{ + u8 reply[1 + OMNIA_MCU_CRYPTO_SIGNATURE_LEN]; + struct omnia_mcu *mcu = dev_id; + int err; + + err = omnia_cmd_read(mcu->client, CMD_CRYPTO_COLLECT_SIGNATURE, reply, + sizeof(reply)); + if (!err && reply[0] != OMNIA_MCU_CRYPTO_SIGNATURE_LEN) + err = -EIO; + + guard(mutex)(&mcu->sign_lock); + + if (mcu->sign_state == SIGN_STATE_REQUESTED) { + mcu->sign_err = err; + if (!err) + memcpy(mcu->signature, &reply[1], + OMNIA_MCU_CRYPTO_SIGNATURE_LEN); + mcu->sign_state = SIGN_STATE_COLLECTED; + complete(&mcu->msg_signed_completion); + } + + return IRQ_HANDLED; +} + +static int do_sign_open(struct inode *inode, struct file *file) +{ + struct omnia_mcu *mcu = inode->i_private; + + guard(mutex)(&mcu->sign_lock); + + /* do_sign is allowed to be opened only once */ + if (mcu->sign_state != SIGN_STATE_CLOSED) + return -EBUSY; + + mcu->sign_state = SIGN_STATE_OPEN; + + file->private_data = mcu; + + return nonseekable_open(inode, file); +} + +static int do_sign_release(struct inode *inode, struct file *file) +{ + struct omnia_mcu *mcu = file->private_data; + + guard(mutex)(&mcu->sign_lock); + + mcu->sign_state = SIGN_STATE_CLOSED; + + /* forget signature on release even if it was not read, for security */ + memzero_explicit(mcu->signature, sizeof(mcu->signature)); + + return 0; +} + +static ssize_t do_sign_read(struct file *file, char __user *buf, size_t len, + loff_t *ppos) +{ + struct omnia_mcu *mcu = file->private_data; + + /* only allow read of one whole signature */ + if (len != sizeof(mcu->signature)) + return -EINVAL; + + scoped_guard(mutex, &mcu->sign_lock) + if (mcu->sign_state != SIGN_STATE_REQUESTED && + mcu->sign_state != SIGN_STATE_COLLECTED) + return -ENODATA; + + if (wait_for_completion_interruptible(&mcu->msg_signed_completion)) + return -EINTR; + + guard(mutex)(&mcu->sign_lock); + + mcu->sign_state = SIGN_STATE_OPEN; + + if (mcu->sign_err) + return mcu->sign_err; + + if (copy_to_user(buf, mcu->signature, len)) + return -EFAULT; + + /* on read forget the signature, for security */ + memzero_explicit(mcu->signature, sizeof(mcu->signature)); + + return len; +} + +static ssize_t do_sign_write(struct file *file, const char __user *buf, + size_t len, loff_t *ppos) +{ + u8 cmd[1 + CMD_CRYPTO_SIGN_MESSAGE_LEN], reply; + struct omnia_mcu *mcu = file->private_data; + int err; + + /* + * the input is a SHA-256 hash of a message to sign, so exactly + * 32 bytes have to be read + */ + if (len != CMD_CRYPTO_SIGN_MESSAGE_LEN) + return -EINVAL; + + cmd[0] = CMD_CRYPTO_SIGN_MESSAGE; + + if (copy_from_user(&cmd[1], buf, len)) + return -EFAULT; + + guard(mutex)(&mcu->sign_lock); + + if (mcu->sign_state != SIGN_STATE_OPEN) + return -EBUSY; + + err = omnia_cmd_write_read(mcu->client, cmd, sizeof(cmd), &reply, 1); + if (err) + return err; + + if (reply) + mcu->sign_state = SIGN_STATE_REQUESTED; + + return reply ? len : -EBUSY; +} + +static const struct file_operations do_sign_fops = { + .owner = THIS_MODULE, + .open = do_sign_open, + .read = do_sign_read, + .write = do_sign_write, + .release = do_sign_release, + .llseek = no_llseek, +}; + +static void omnia_irq_mapping_drop(void *res) +{ + irq_dispose_mapping((unsigned int)(unsigned long)res); +} + +static void omnia_debugfs_drop_dir(void *res) +{ + debugfs_remove_recursive(res); +} + +int omnia_mcu_register_debugfs(struct omnia_mcu *mcu) +{ + struct device *dev = &mcu->client->dev; + struct dentry *root; + int irq, err; + u8 irq_idx; + + if (!(mcu->features & FEAT_CRYPTO)) + return 0; + + irq_idx = omnia_int_to_gpio_idx[__bf_shf(INT_MESSAGE_SIGNED)]; + irq = gpiod_to_irq(gpiochip_get_desc(&mcu->gc, irq_idx)); + if (irq < 0) + return dev_err_probe(dev, irq, + "Cannot get MESSAGE_SIGNED IRQ\n"); + + err = devm_add_action_or_reset(dev, omnia_irq_mapping_drop, + (void *)(unsigned long)irq); + if (err) + return err; + + err = devm_mutex_init(dev, &mcu->sign_lock); + if (err) + return err; + + mcu->sign_state = 0; + + init_completion(&mcu->msg_signed_completion); + + err = devm_request_threaded_irq(dev, irq, NULL, + omnia_msg_signed_irq_handler, + IRQF_ONESHOT, + "turris-omnia-mcu-debugfs", mcu); + if (err) + return dev_err_probe(dev, err, + "Cannot request MESSAGE_SIGNED IRQ\n"); + + root = debugfs_create_dir("turris-omnia-mcu", NULL); + debugfs_create_file_unsafe("do_sign", 0600, root, mcu, &do_sign_fops); + + return devm_add_action_or_reset(dev, omnia_debugfs_drop_dir, root); +} diff --git a/drivers/platform/cznic/turris-omnia-mcu.h b/drivers/platform/cznic/turris-omnia-mcu.h index e0cf10f8c32e..5ce639d5ec67 100644 --- a/drivers/platform/cznic/turris-omnia-mcu.h +++ b/drivers/platform/cznic/turris-omnia-mcu.h @@ -21,6 +21,9 @@ #include #include +#define OMNIA_MCU_CRYPTO_PUBLIC_KEY_LEN 33 +#define OMNIA_MCU_CRYPTO_SIGNATURE_LEN 64 + struct omnia_mcu { struct i2c_client *client; const char *type; @@ -30,6 +33,7 @@ struct omnia_mcu { u64 board_serial_number; u8 board_first_mac[ETH_ALEN]; u8 board_revision; + u8 board_public_key[OMNIA_MCU_CRYPTO_PUBLIC_KEY_LEN]; /* GPIO chip */ struct gpio_chip gc; @@ -51,6 +55,16 @@ struct omnia_mcu { /* true random number generator */ struct hwrng trng; struct completion trng_completion; + +#ifdef CONFIG_DEBUG_FS + /* MCU ECDSA message signing via debugfs */ + struct dentry *debugfs_root; + struct completion msg_signed_completion; + struct mutex sign_lock; + unsigned int sign_state; + u8 signature[OMNIA_MCU_CRYPTO_SIGNATURE_LEN]; + int sign_err; +#endif }; int omnia_cmd_write_read(const struct i2c_client *client, @@ -162,4 +176,13 @@ int omnia_mcu_register_sys_off_and_wakeup(struct omnia_mcu *mcu); int omnia_mcu_register_trng(struct omnia_mcu *mcu); int omnia_mcu_register_watchdog(struct omnia_mcu *mcu); +#ifdef CONFIG_DEBUG_FS +int omnia_mcu_register_debugfs(struct omnia_mcu *mcu); +#else +static inline int omnia_mcu_register_debugfs(struct omnia_mcu *mcu) +{ + return 0; +} +#endif + #endif /* __TURRIS_OMNIA_MCU_H */ From patchwork Wed Apr 24 17:38:07 2024 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 8bit X-Patchwork-Submitter: =?utf-8?q?Marek_Beh=C3=BAn?= X-Patchwork-Id: 13642284 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from smtp.kernel.org (aws-us-west-2-korg-mail-1.web.codeaurora.org [10.30.226.201]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.lore.kernel.org (Postfix) with ESMTPS id 2D29EC4345F for ; Wed, 24 Apr 2024 17:38:44 +0000 (UTC) Received: by smtp.kernel.org (Postfix) id 17452C4AF09; Wed, 24 Apr 2024 17:38:44 +0000 (UTC) Received: by smtp.kernel.org (Postfix) with ESMTPSA id 0D22CC32782; Wed, 24 Apr 2024 17:38:40 +0000 (UTC) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/simple; d=kernel.org; s=k20201202; t=1713980324; bh=37yk1SLJTNogGwuhRvNW0aCMjVDru9bLPJ0iOjpjveE=; h=From:List-Id:To:Cc:Subject:Date:In-Reply-To:References:From; b=OSHqfoBflqy+8Q8xuPc91PA4T8d9cEEBM2/9cpSOuslDUrNS6sA0Z/eV8sfR0SXx7 UsLgaLXHdzfVYTKruaRInKuMNOOQ0ps1cc2/7oZgbLrS8DInayiVPqgldfm3X79yIf JhX1dRHwho/YaN90DgL0TSoNUzQesPmSu3q4rK1eXeb37wJcnnHgF5dI3hCqHTgpXV jaU40ngauz5QcSXYFHv/2Au4uUBC+fPkS5eaD5hO449qpcyDnASxTY/yOWZ5UopHP1 LdolEGJhVAjAEVRoDmqqhcMICvov683JH5v7fTYk7U0aQETWX0l/bOrQNpPkhk2qMF ZzFwCP9vFAslw== From: =?utf-8?q?Marek_Beh=C3=BAn?= List-Id: To: Gregory CLEMENT , Arnd Bergmann , soc@kernel.org, arm@kernel.org, Andy Shevchenko , Hans de Goede , =?utf-8?q?Ilpo_J=C3=A4rvinen?= Cc: =?utf-8?q?Marek_Beh=C3=BAn?= , Andrew Lunn , Sebastian Hesselbarth , Rob Herring , Krzysztof Kozlowski , Conor Dooley , =?utf-8?q?Uwe_Kleine-K=C3=B6nig?= , devicetree@vger.kernel.org Subject: [PATCH v7 8/9] ARM: dts: turris-omnia: Add MCU system-controller node Date: Wed, 24 Apr 2024 19:38:07 +0200 Message-ID: <20240424173809.7214-9-kabel@kernel.org> X-Mailer: git-send-email 2.43.2 In-Reply-To: <20240424173809.7214-1-kabel@kernel.org> References: <20240424173809.7214-1-kabel@kernel.org> MIME-Version: 1.0 Turris Omnia's MCU provides various features that can be configured over I2C at address 0x2a. Add device-tree node. Fixes: 26ca8b52d6e1 ("ARM: dts: add support for Turris Omnia") Signed-off-by: Marek Behún --- .../dts/marvell/armada-385-turris-omnia.dts | 22 ++++++++++++++++++- 1 file changed, 21 insertions(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/marvell/armada-385-turris-omnia.dts b/arch/arm/boot/dts/marvell/armada-385-turris-omnia.dts index 7b755bb4e4e7..59079d63fe27 100644 --- a/arch/arm/boot/dts/marvell/armada-385-turris-omnia.dts +++ b/arch/arm/boot/dts/marvell/armada-385-turris-omnia.dts @@ -218,7 +218,22 @@ i2c@0 { #size-cells = <0>; reg = <0>; - /* STM32F0 command interface at address 0x2a */ + mcu: system-controller@2a { + compatible = "cznic,turris-omnia-mcu"; + reg = <0x2a>; + + pinctrl-names = "default"; + pinctrl-0 = <&mcu_pins>; + + interrupt-parent = <&gpio1>; + interrupts = <11 IRQ_TYPE_NONE>; + + gpio-controller; + #gpio-cells = <3>; + + interrupt-controller; + #interrupt-cells = <2>; + }; led-controller@2b { compatible = "cznic,turris-omnia-leds"; @@ -501,6 +516,11 @@ fixed-link { }; &pinctrl { + mcu_pins: mcu-pins { + marvell,pins = "mpp43"; + marvell,function = "gpio"; + }; + pcawan_pins: pcawan-pins { marvell,pins = "mpp46"; marvell,function = "gpio"; From patchwork Wed Apr 24 17:38:08 2024 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 8bit X-Patchwork-Submitter: =?utf-8?q?Marek_Beh=C3=BAn?= X-Patchwork-Id: 13642285 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from smtp.kernel.org (aws-us-west-2-korg-mail-1.web.codeaurora.org [10.30.226.201]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.lore.kernel.org (Postfix) with ESMTPS id 856FBC07E8E for ; Wed, 24 Apr 2024 17:38:47 +0000 (UTC) Received: by smtp.kernel.org (Postfix) id 759FCC3277B; Wed, 24 Apr 2024 17:38:47 +0000 (UTC) Received: by smtp.kernel.org (Postfix) with ESMTPSA id 6F943C32783; Wed, 24 Apr 2024 17:38:44 +0000 (UTC) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/simple; d=kernel.org; s=k20201202; t=1713980327; bh=TLaO4PDj+2DqhXNFfIhRQHhMhs/mD6k6Z62/73Qbj6Y=; h=From:List-Id:To:Cc:Subject:Date:In-Reply-To:References:From; b=qsSj3umq66SAUQNeJw424d00LyjtIgnooReAkBEhWykoawXbajOt9y7zc8n/TyYF8 aXkcVs5E2+a8JXVJEvsNu8c+zt+ntaRZXX1TIPoKezenXI7b4IjErcBD37z2z6Htpm xoDpBqNs2yhl+jhrBrEIXuxoaQ9LgPmxkEOIADYWLx9N6PvHKeLr50QbjzOmAn3+SU IIMOYjHZ4So2BNnFziSNE4ZjfKFO3rQVVBIU1NziMu5RwFCh6XjPR5XGatP0EaDIgj Wfcs69U0B+zqUfmB5WRSQ9vZeEOXU+0mS90mEj8ZbPE9YaUCp4IhK8T7TKSusdjleU 3MWJH2pNfbdgQ== From: =?utf-8?q?Marek_Beh=C3=BAn?= List-Id: To: Gregory CLEMENT , Arnd Bergmann , soc@kernel.org, arm@kernel.org, Andy Shevchenko , Hans de Goede , =?utf-8?q?Ilpo_J=C3=A4rvinen?= Cc: =?utf-8?q?Marek_Beh=C3=BAn?= , Andrew Lunn , Sebastian Hesselbarth , Rob Herring , Krzysztof Kozlowski , Conor Dooley , =?utf-8?q?Uwe_Kleine-K=C3=B6nig?= , devicetree@vger.kernel.org Subject: [PATCH v7 9/9] ARM: dts: turris-omnia: Add GPIO key node for front button Date: Wed, 24 Apr 2024 19:38:08 +0200 Message-ID: <20240424173809.7214-10-kabel@kernel.org> X-Mailer: git-send-email 2.43.2 In-Reply-To: <20240424173809.7214-1-kabel@kernel.org> References: <20240424173809.7214-1-kabel@kernel.org> MIME-Version: 1.0 Now that we have the MCU device-tree node, which acts as a GPIO controller, add GPIO key node for the front button. Fixes: 26ca8b52d6e1 ("ARM: dts: add support for Turris Omnia") Signed-off-by: Marek Behún --- .../boot/dts/marvell/armada-385-turris-omnia.dts | 13 +++++++++++++ 1 file changed, 13 insertions(+) diff --git a/arch/arm/boot/dts/marvell/armada-385-turris-omnia.dts b/arch/arm/boot/dts/marvell/armada-385-turris-omnia.dts index 59079d63fe27..43202890c959 100644 --- a/arch/arm/boot/dts/marvell/armada-385-turris-omnia.dts +++ b/arch/arm/boot/dts/marvell/armada-385-turris-omnia.dts @@ -112,6 +112,19 @@ sfp: sfp { status = "disabled"; }; + gpio-keys { + compatible = "gpio-keys"; + + front-button { + label = "Front Button"; + linux,code = ; + linux,can-disable; + gpios = <&mcu 0 12 GPIO_ACTIVE_HIGH>; + /* debouncing is done by the microcontroller */ + debounce-interval = <0>; + }; + }; + sound { compatible = "simple-audio-card"; simple-audio-card,name = "SPDIF";