From patchwork Tue Apr 30 11:59:50 2024 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Matti Vaittinen X-Patchwork-Id: 13648842 Received: from mail-lf1-f49.google.com (mail-lf1-f49.google.com [209.85.167.49]) (using TLSv1.2 with cipher ECDHE-RSA-AES128-GCM-SHA256 (128/128 bits)) (No client certificate requested) by smtp.subspace.kernel.org (Postfix) with ESMTPS id EF8DC12D741; Tue, 30 Apr 2024 11:59:56 +0000 (UTC) Authentication-Results: smtp.subspace.kernel.org; arc=none smtp.client-ip=209.85.167.49 ARC-Seal: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1714478398; cv=none; b=H/rajUQK+LfdxnUaQXWrP/rzBMFSEfIXzuAsOYG5NSX4hAaybtINQlSvfXCeHnQdq5ayNAsnewfhbwIAoyfYgnYIGlSEBtHLbr32G0GTlG92L34Etnbl3Qxo1OT7IQMAOkiIp8l/sVZO7n10bznLTayPp1u9t9JhMnFmhipjPuI= ARC-Message-Signature: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1714478398; c=relaxed/simple; bh=Rj8/n9aXfCY8FIc0dy4NmHMwKEb9srWY5WbHvYFWdWs=; h=Date:From:To:Cc:Subject:Message-ID:References:MIME-Version: Content-Type:Content-Disposition:In-Reply-To; b=lEYVyk+4DHDqjac3Jy2KXAyy29xwsKGw6A0ceDeMNtlolTS9YFD2VAbiRdvZWbbBqdHc1cckrBJ4HlVJXaYT0+xTkf8iNpx3NkfXqbjgckSWUUf/7d78Cgv8K2uKjL6J6nInzMHkkzWXvI0ZXhzdU0KQLfWBZgQz3L1ZIHsfWGg= ARC-Authentication-Results: i=1; smtp.subspace.kernel.org; dmarc=pass (p=none dis=none) header.from=gmail.com; spf=pass smtp.mailfrom=gmail.com; dkim=pass (2048-bit key) header.d=gmail.com header.i=@gmail.com header.b=jKCh36h8; arc=none smtp.client-ip=209.85.167.49 Authentication-Results: smtp.subspace.kernel.org; dmarc=pass (p=none dis=none) header.from=gmail.com Authentication-Results: smtp.subspace.kernel.org; spf=pass smtp.mailfrom=gmail.com Authentication-Results: smtp.subspace.kernel.org; dkim=pass (2048-bit key) header.d=gmail.com header.i=@gmail.com header.b="jKCh36h8" Received: by mail-lf1-f49.google.com with SMTP id 2adb3069b0e04-518a56cdbcfso8901252e87.2; Tue, 30 Apr 2024 04:59:56 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=20230601; t=1714478395; x=1715083195; darn=vger.kernel.org; h=in-reply-to:content-disposition:mime-version:references:message-id :subject:cc:to:from:date:from:to:cc:subject:date:message-id:reply-to; bh=xju/arvK0sErvj5pJZGnW9THE1Ws/OZmXsHEsvMZiQ8=; b=jKCh36h8ooubt8hRiL52rMz5LPU9B+KTgSGJPz17fyd7iz6oZkZvuZlXcAKr76qVGr Pvcief2Pup6QAtPVlZcexY4LHiZGryaZ7EX1iEarQGcAlpsW8B2MCjNQV1bvY52x0DKF DXDfr2Bh+jidQXYjYSQJkOH0/smHI7QbfBsiyA2UZ6uFV8ZPsL0DYmKQOa4eZP0YgGXt v6As2Mql0lspro0t/zDufE/nttwA4nIkiikZJMOO3tpi6ftdSfx0CRThBa7sNqfKpgMn MzC+eOjRQetQmxFREY4dXtl98mJ4fnO9gjPUD1EXXhTsYwFBNabKwOkeFanLSLcVEAas uDuA== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20230601; t=1714478395; x=1715083195; h=in-reply-to:content-disposition:mime-version:references:message-id :subject:cc:to:from:date:x-gm-message-state:from:to:cc:subject:date :message-id:reply-to; bh=xju/arvK0sErvj5pJZGnW9THE1Ws/OZmXsHEsvMZiQ8=; b=jVlFhryCslfrKuBfRwV5tDOzdi3Y/oZJCDUkBpBUlrbnMEmTZn6InV1rAjiK56JZ/y rfXxv0u/k8lO3qMH4LU9Lc8XHJoiiQuFENaMpFmfglbn/VuY6G9OS+zAhna1zYviOVca D1K+E5q5a6l2DjxUyr8kGRhU3rz7ONjsxbuaN6XoAUB4SUuBO2hsvFs3hx7oo5JfU7xH cmBf65RGBnHgugDjDPpNhCVj50y1wz96cMialv99IcKT8R72vfeB5SsdYmZAwhZr8xiN 0hhIqkgW5wVElzywK+R37Z/x1fRDfugyO/+wjl97x8f0q9+q583vG9qsuPIaeqFce/T+ pNMA== X-Forwarded-Encrypted: i=1; AJvYcCVi7lwznMnh+0jxKDMtY9cDR4S18WTGKucEA5cz10vtwztin3zta62dAsbfE1bAEJ20+djW7c8qilZ3YtlNQzeEWhC5koFr/Ho0Z9rH7hM95MLFgiid5VWusMLVP9oaBcwqm54IRjxycx6AXx5tu60+TJnbFGo0wWDOxGWJ2vl6wHA2l4I3YHka X-Gm-Message-State: AOJu0Yy5Htma1P8ar87xKlhuX74tzYHsILrTXB84wRQbQlwVF4aBqz3O lSqy8aNPfuyy5ok6eNQb3IF/mJbRpm1HEwb+TzIWrc0fwWzwgV6B5CGuKg== X-Google-Smtp-Source: AGHT+IF+YnIQJ4uDvCiCSdCNOSwuMTRHB0O5lT5IswlFSqPFfuvN24lY+l+X3247BbaddvYtHGdpqw== X-Received: by 2002:ac2:4a70:0:b0:51b:250a:a8fb with SMTP id q16-20020ac24a70000000b0051b250aa8fbmr11433570lfp.48.1714478394809; Tue, 30 Apr 2024 04:59:54 -0700 (PDT) Received: from fedora ([213.255.186.46]) by smtp.gmail.com with ESMTPSA id eo6-20020a056512480600b00518bf12488csm4431140lfb.160.2024.04.30.04.59.53 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Tue, 30 Apr 2024 04:59:54 -0700 (PDT) Date: Tue, 30 Apr 2024 14:59:50 +0300 From: Matti Vaittinen To: Matti Vaittinen , Matti Vaittinen Cc: Lee Jones , Rob Herring , Krzysztof Kozlowski , Conor Dooley , Liam Girdwood , Mark Brown , Matti Vaittinen , Wim Van Sebroeck , Guenter Roeck , devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-watchdog@vger.kernel.org Subject: [PATCH v1 1/6] dt-bindings: ROHM BD96801 PMIC regulators Message-ID: References: Precedence: bulk X-Mailing-List: linux-watchdog@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 Content-Disposition: inline In-Reply-To: ROHM BD96801 is a highly configurable automotive grade PMIC. Introduce DT bindings for the BD96801 regulators. Signed-off-by: Matti Vaittinen --- RFCv2 => v1 - Drop regulator-name pattern requirement - do not require regulator-name --- .../regulator/rohm,bd96801-regulator.yaml | 62 +++++++++++++++++++ 1 file changed, 62 insertions(+) create mode 100644 Documentation/devicetree/bindings/regulator/rohm,bd96801-regulator.yaml diff --git a/Documentation/devicetree/bindings/regulator/rohm,bd96801-regulator.yaml b/Documentation/devicetree/bindings/regulator/rohm,bd96801-regulator.yaml new file mode 100644 index 000000000000..1b96ae60064d --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/rohm,bd96801-regulator.yaml @@ -0,0 +1,62 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/regulator/rohm,bd96801-regulator.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ROHM BD96801 Power Management Integrated Circuit regulators + +maintainers: + - Matti Vaittinen + +description: | + This module is part of the ROHM BD96801 MFD device. For more details + see Documentation/devicetree/bindings/mfd/rohm,bd96801-pmic.yaml. + + The regulator controller is represented as a sub-node of the PMIC node + on the device tree. + + Regulator nodes should be named to BUCK_ and LDO_. + The valid names for BD96801 regulator nodes are + BUCK1, BUCK2, BUCK3, BUCK4, LDO5, LDO6, LDO7 + +patternProperties: + "^LDO[5-7]$": + type: object + description: + Properties for single LDO regulator. + $ref: regulator.yaml# + + properties: + rohm,initial-voltage-microvolt: + description: + Initial voltage for regulator. Voltage can be tuned +/-150 mV from + this value. NOTE, This can be modified via I2C only when PMIC is in + STBY state. + minimum: 300000 + maximum: 3300000 + + unevaluatedProperties: false + + "^BUCK[1-4]$": + type: object + description: + Properties for single BUCK regulator. + $ref: regulator.yaml# + + properties: + rohm,initial-voltage-microvolt: + description: + Initial voltage for regulator. Voltage can be tuned +/-150 mV from + this value. NOTE, This can be modified via I2C only when PMIC is in + STBY state. + minimum: 500000 + maximum: 3300000 + rohm,keep-on-stby: + description: + Keep the regulator powered when PMIC transitions to STBY state. + type: boolean + + unevaluatedProperties: false + +additionalProperties: false From patchwork Tue Apr 30 12:00:22 2024 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Matti Vaittinen X-Patchwork-Id: 13648843 Received: from mail-lj1-f170.google.com (mail-lj1-f170.google.com [209.85.208.170]) (using TLSv1.2 with cipher ECDHE-RSA-AES128-GCM-SHA256 (128/128 bits)) (No client certificate requested) by smtp.subspace.kernel.org (Postfix) with ESMTPS id A2819383A5; Tue, 30 Apr 2024 12:00:31 +0000 (UTC) Authentication-Results: smtp.subspace.kernel.org; arc=none smtp.client-ip=209.85.208.170 ARC-Seal: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1714478433; cv=none; b=YglznzN51PT85Y9k7A99hrQUSP8dANM9hJ0H0RG0lDDSN0xork3BxHdjWlSQI62DES75XHBDvfgPoTWCMWRMpzZTKjXtVcwLyqsmItsjYxk4Csc7nvIyGyjvsz+Nren8VPr1rNW95SCaRiHG4jEvuMhJabGvdrFSBoDHMFYsJDc= ARC-Message-Signature: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1714478433; c=relaxed/simple; bh=WsVI0PWkDKpF9nx8WkAVWb0p4taRtuJlTv+0+Ey7HC8=; h=Date:From:To:Cc:Subject:Message-ID:References:MIME-Version: Content-Type:Content-Disposition:In-Reply-To; b=jaW07RlMeQzSW0ij9mRHAWuda/SUKWyNWJ/YV2ee9xxaSf8T8v0VMqnMdYwFt3BP20cZ+FOQeD4ESIivcf5a+1SCS1eD5yksJGS0jdhVurwUQ1ZTxsVroQSYLlAu9aiqgeapjEDLSHaZ5gZSGcVxBxuWRRCDrT5IuX/Sc1eTWc8= ARC-Authentication-Results: i=1; smtp.subspace.kernel.org; dmarc=pass (p=none dis=none) header.from=gmail.com; spf=pass smtp.mailfrom=gmail.com; dkim=pass (2048-bit key) header.d=gmail.com header.i=@gmail.com header.b=bGzSZe94; arc=none smtp.client-ip=209.85.208.170 Authentication-Results: smtp.subspace.kernel.org; dmarc=pass (p=none dis=none) header.from=gmail.com Authentication-Results: smtp.subspace.kernel.org; spf=pass smtp.mailfrom=gmail.com Authentication-Results: smtp.subspace.kernel.org; dkim=pass (2048-bit key) header.d=gmail.com header.i=@gmail.com header.b="bGzSZe94" Received: by mail-lj1-f170.google.com with SMTP id 38308e7fff4ca-2db13ca0363so89660221fa.3; Tue, 30 Apr 2024 05:00:31 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=20230601; t=1714478430; x=1715083230; darn=vger.kernel.org; h=in-reply-to:content-disposition:mime-version:references:message-id :subject:cc:to:from:date:from:to:cc:subject:date:message-id:reply-to; bh=NZfKSrx+PwursxVEIYsHbSPwNnhFIBwQF840+S2boqw=; b=bGzSZe94yZNA1TqLUOtfT8rlxNdibJEo+RUz4zkNCv/C5vXDxhWS+5jcxEZ93zrAc7 TLO80ldRygDfAjknVX2DRBlVPPt1cS707XSU2hCs+bw45ox1RWxE4I1pAlSEsP8Zwuzn d3yISQIBAL2mt1RCJTvZrRELRolRpGAPOGOcMKF4gGzjyYuZ7xivQOStJmBxcwbN8ORe 7BZauYuvcIBPOy+qNFwlXqBSUG+6KhYxyw8HqG3w3m9TL+PSmCbVJWYWigpXSToLQ6Sx 4XaecrjjbDHnJS70DrM3Qq3MISusLooAq8KPAYhugZZrH3fRi4HtCZjDcveZzzbbd2NF nyCw== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20230601; t=1714478430; x=1715083230; h=in-reply-to:content-disposition:mime-version:references:message-id :subject:cc:to:from:date:x-gm-message-state:from:to:cc:subject:date :message-id:reply-to; bh=NZfKSrx+PwursxVEIYsHbSPwNnhFIBwQF840+S2boqw=; b=en0bdg6N6jnMjcaiImEc404RKWbOJZ+wnr9hcvGA1yz1/hPnXczsmMn0c7AAIyyDFS ogTI1sIOBs2dzNCzC03Z6OgpvcucT/M8qjHPPPezXLhBZjWGKaFj+BzSkZsHfWb7dmAc 4XpZx2G4xa6SmqQbNIowfwR7I7vNnj90omCK1PSALztKpPhritcZWGXSvD0fZ3D2RYmV xHDfNlgge2LTpYWrPgXSK1MqBxOjeWYdKgIIrQdmYN9CM3Ym6baYfxs3n/5u3BnKnRRz CsEQV5cEptfwfPFjIZqbCh5DOLQjd+5AuqW0fuRCVo9bxfL4HOt4J1oxLyAtBxySM48S HTag== X-Forwarded-Encrypted: i=1; AJvYcCXm0v0cXPh4MsOhdeBqT/LlZIgQ3Uc5sNvuial4q6FhKMH5SAvWjbPxJt5X6JEELBN6MT6zRZ7tSw6ZiHRznbSgbafVd/Q/c6WGWE0zkUGtoRBSLo+sWquK52LmeMqhC3CUZATKbN/ujv9Iih7pez63X1mVO3Y1bZrWzeO/pgGAepwP6LtqDKD2 X-Gm-Message-State: AOJu0YyWt/lYanJQ62XO0dshJj0bIqLW6C0M7QTipQwl7i5n1RYb7vxu tnS2wc60MWElef9gln3HgY1Fbcn45yVGDSxcr5EdYRx6fsADZaqp X-Google-Smtp-Source: AGHT+IH1lxIV8eIVLRottFtZZRGw3SIaT6l+9Ocx7YJtfpO/iOi4VdKc1Lbc89r4kw/K4ziFbncLSg== X-Received: by 2002:a2e:b714:0:b0:2db:c2e0:c541 with SMTP id j20-20020a2eb714000000b002dbc2e0c541mr9443777ljo.53.1714478429488; Tue, 30 Apr 2024 05:00:29 -0700 (PDT) Received: from fedora ([213.255.186.46]) by smtp.gmail.com with ESMTPSA id w22-20020a2e9996000000b002da2c2fc293sm3863284lji.121.2024.04.30.05.00.25 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Tue, 30 Apr 2024 05:00:26 -0700 (PDT) Date: Tue, 30 Apr 2024 15:00:22 +0300 From: Matti Vaittinen To: Matti Vaittinen , Matti Vaittinen Cc: Lee Jones , Rob Herring , Krzysztof Kozlowski , Conor Dooley , Liam Girdwood , Mark Brown , Matti Vaittinen , Wim Van Sebroeck , Guenter Roeck , devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-watchdog@vger.kernel.org Subject: [PATCH v1 2/6] dt-bindings: mfd: bd96801 PMIC core Message-ID: References: Precedence: bulk X-Mailing-List: linux-watchdog@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 Content-Disposition: inline In-Reply-To: ROHM BD96801 is a highly configurable automotive grade PMIC. Introduce DT bindings for the BD96801 core. Signed-off-by: Matti Vaittinen --- Revision history: RFCv2 => v1 - minor cleaning - add timeout-sec RFCv1 => RFCv2: - Document rohm,hw-timeout-ms - Document rohm,wdg-action --- .../bindings/mfd/rohm,bd96801-pmic.yaml | 172 ++++++++++++++++++ 1 file changed, 172 insertions(+) create mode 100644 Documentation/devicetree/bindings/mfd/rohm,bd96801-pmic.yaml diff --git a/Documentation/devicetree/bindings/mfd/rohm,bd96801-pmic.yaml b/Documentation/devicetree/bindings/mfd/rohm,bd96801-pmic.yaml new file mode 100644 index 000000000000..fce338681302 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/rohm,bd96801-pmic.yaml @@ -0,0 +1,172 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/rohm,bd96801-pmic.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ROHM BD96801 Scalable Power Management Integrated Circuit + +maintainers: + - Matti Vaittinen + +description: + BD96801 is an automotive grade single-chip power management IC. + It integrates 4 buck converters and 3 LDOs with safety features like + over-/under voltage and over current detection and a watchdog. + +properties: + compatible: + const: rohm,bd96801 + + reg: + maxItems: 1 + + interrupts: + description: + The PMIC provides intb and errb IRQ lines. The errb IRQ line is used + for fatal IRQs which will cause the PMIC to shut down power outputs. + In many systems this will shut down the SoC contolling the PMIC and + connecting/handling the errb can be omitted. However, there are cases + where the SoC is not powered by the PMIC. In that case it may be + useful to connect the errb and handle errb events. + minItems: 1 + maxItems: 2 + + interrupt-names: + minItems: 1 + items: + - enum: [intb, errb] + - const: errb + + rohm,hw-timeout-ms: + description: + Watchdog timeout value(s). First walue is timeout limit. Second value is + optional value for 'too early' watchdog ping if window timeout mode is + to be used. + minItems: 1 + maxItems: 2 + + rohm,wdg-action: + description: + Whether the watchdog failure must turn off the regulator power outputs or + just toggle the INTB line. + enum: + - prstb + - intb-only + + timeout-sec: + maxItems: 2 + + regulators: + $ref: /schemas/regulator/rohm,bd96801-regulator.yaml + description: + List of child nodes that specify the regulators. + +required: + - compatible + - reg + - interrupts + - interrupt-names + - regulators + +additionalProperties: false + +examples: + - | + #include + #include + i2c { + #address-cells = <1>; + #size-cells = <0>; + pmic: pmic@60 { + reg = <0x60>; + compatible = "rohm,bd96801"; + interrupt-parent = <&gpio1>; + interrupts = <29 IRQ_TYPE_LEVEL_LOW>, <6 IRQ_TYPE_LEVEL_LOW>; + interrupt-names = "intb", "errb"; + + regulators { + buck1: BUCK1 { + regulator-name = "buck1"; + regulator-ramp-delay = <1250>; + /* 0.5V min INITIAL - 150 mV tune */ + regulator-min-microvolt = <350000>; + /* 3.3V + 150mV tune */ + regulator-max-microvolt = <3450000>; + + /* These can be set only when PMIC is in STBY */ + rohm,initial-voltage-microvolt = <500000>; + regulator-ov-error-microvolt = <230000>; + regulator-uv-error-microvolt = <230000>; + regulator-temp-protection-kelvin = <1>; + regulator-temp-warn-kelvin = <0>; + }; + buck2: BUCK2 { + regulator-name = "buck2"; + regulator-min-microvolt = <350000>; + regulator-max-microvolt = <3450000>; + + rohm,initial-voltage-microvolt = <3000000>; + regulator-ov-error-microvolt = <18000>; + regulator-uv-error-microvolt = <18000>; + regulator-temp-protection-kelvin = <1>; + regulator-temp-warn-kelvin = <1>; + }; + buck3: BUCK3 { + regulator-name = "buck3"; + regulator-min-microvolt = <350000>; + regulator-max-microvolt = <3450000>; + + rohm,initial-voltage-microvolt = <600000>; + regulator-ov-warn-microvolt = <18000>; + regulator-uv-warn-microvolt = <18000>; + regulator-temp-protection-kelvin = <1>; + regulator-temp-error-kelvin = <0>; + }; + buck4: BUCK4 { + regulator-name = "buck4"; + regulator-min-microvolt = <350000>; + regulator-max-microvolt = <3450000>; + + rohm,initial-voltage-microvolt = <600000>; + regulator-ov-warn-microvolt = <18000>; + regulator-uv-warn-microvolt = <18000>; + regulator-temp-protection-kelvin = <1>; + regulator-temp-error-kelvin = <0>; + }; + ldo5: LDO5 { + regulator-name = "ldo5"; + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <3300000>; + + rohm,initial-voltage-microvolt = <500000>; + regulator-ov-error-microvolt = <36000>; + regulator-uv-error-microvolt = <34000>; + regulator-temp-protection-kelvin = <1>; + regulator-temp-warn-kelvin = <0>; + }; + ldo6: LDO6 { + regulator-name = "ldo6"; + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <3300000>; + + rohm,initial-voltage-microvolt = <300000>; + regulator-ov-error-microvolt = <36000>; + regulator-uv-error-microvolt = <34000>; + regulator-temp-protection-kelvin = <1>; + regulator-temp-warn-kelvin = <0>; + }; + ldo7: LDO7 { + regulator-name = "ldo7"; + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <3300000>; + + rohm,initial-voltage-microvolt = <500000>; + regulator-ov-error-microvolt = <36000>; + regulator-uv-error-microvolt = <34000>; + regulator-temp-protection-kelvin = <1>; + regulator-temp-warn-kelvin = <0>; + }; + }; + }; + }; From patchwork Tue Apr 30 12:00:51 2024 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Matti Vaittinen X-Patchwork-Id: 13648844 Received: from mail-lf1-f54.google.com (mail-lf1-f54.google.com [209.85.167.54]) (using TLSv1.2 with cipher ECDHE-RSA-AES128-GCM-SHA256 (128/128 bits)) (No client certificate requested) by smtp.subspace.kernel.org (Postfix) with ESMTPS id 972E413D277; Tue, 30 Apr 2024 12:01:00 +0000 (UTC) Authentication-Results: smtp.subspace.kernel.org; arc=none smtp.client-ip=209.85.167.54 ARC-Seal: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1714478464; cv=none; b=nV2DpbO59Wh5TH6hcU76+wdfmPOZXNEDhckWxNeaLmo5o+c8h3w4KWmygk7IezMlbNgg/TgD32tufTmfOmeiSkhj5Od+SpmTIMIOlByTcB1Kc4LN6KqDT9L/Xq4lbTwHNDjZrF+sJ5hwROqKZEWy9RqrkyXRUd+BF6CJgzWNTm8= ARC-Message-Signature: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1714478464; c=relaxed/simple; bh=3BRJ8PY/dY3VNwMNnOFz+JYwMQArk9IeRW/x0sHvSjA=; h=Date:From:To:Cc:Subject:Message-ID:References:MIME-Version: Content-Type:Content-Disposition:In-Reply-To; b=ISNVdyKEYH4i6UvHubR86MJqoCGXgFiBrVJdE+bBFSzKd6CihsPVSxsHTiT7Pc0oL8DmWpKeDaAkcrw3E348GCWlZEm4n1Pw7VlGeoeKhJeJ3++QwvA18bVL6TVpZlAerHd5CVT2Y0/AoXmUiA0ewpesP5JDVh9b4jiQVES6KE8= ARC-Authentication-Results: i=1; smtp.subspace.kernel.org; dmarc=pass (p=none dis=none) header.from=gmail.com; spf=pass smtp.mailfrom=gmail.com; dkim=pass (2048-bit key) header.d=gmail.com header.i=@gmail.com header.b=l4rp1DAf; arc=none smtp.client-ip=209.85.167.54 Authentication-Results: smtp.subspace.kernel.org; dmarc=pass (p=none dis=none) header.from=gmail.com Authentication-Results: smtp.subspace.kernel.org; spf=pass smtp.mailfrom=gmail.com Authentication-Results: smtp.subspace.kernel.org; dkim=pass (2048-bit key) header.d=gmail.com header.i=@gmail.com header.b="l4rp1DAf" Received: by mail-lf1-f54.google.com with SMTP id 2adb3069b0e04-51ae315bb20so6889221e87.1; Tue, 30 Apr 2024 05:01:00 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=20230601; t=1714478459; x=1715083259; darn=vger.kernel.org; h=in-reply-to:content-disposition:mime-version:references:message-id :subject:cc:to:from:date:from:to:cc:subject:date:message-id:reply-to; bh=mkmAsolUR+juiYAth8Pp6jgiN9nq6Ou9FT+7lT1PSeU=; b=l4rp1DAfbYFalysuy7c2/mdpVCyGfBiNQ8LaIH/IeQIyUjM2hTdaZoB9/CW+DFbQL8 dl73cTc6idmLXE1ik8WR3rwJDhNibma3uu/VXXv9TAgiD+mih0YzLwiIqSuS6+o1jdDi yRdEwiXdKKM9IPxO/3dxikb5MQqgBRsmgwftLm059yqW4J9+RQKZhlgZos7O9gZkNJAu n4Yy/P+aYQTqRWNkW4JlKGI2IuuFgtDVTzy5y5sAIGywbvbOHGEIEj+hb3XZm8/7zYnq IytJx/YBgEZ+yiAax/iMsI44ZkgSAd8GVWa8qU0MnfSgC/751HuRyzSMB/JmyWr/J+mn QwHQ== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20230601; t=1714478459; x=1715083259; h=in-reply-to:content-disposition:mime-version:references:message-id :subject:cc:to:from:date:x-gm-message-state:from:to:cc:subject:date :message-id:reply-to; bh=mkmAsolUR+juiYAth8Pp6jgiN9nq6Ou9FT+7lT1PSeU=; b=IAEOtrbzSUs3mckx2NmqEVnDR7EoqB7TO86ybGv55i2GDBk1uX3sjotUIFitZaxnuj dkXOyCTvyIVHbmJgPWHPIc8AbLEZxCJl23nnKpe6D+PCJX6v/eJ5fefRZ0nzYFgff3sC HlRyDGV4mwfru6eEVxxOVLSQ/eUn0Xc2+eE73XVAMVqcezub/v+6xkIMmCNb2nJEbGAe r8+RXuK438kIJlbZIo2hCEGmchlG5nF9NqOv08esjKq2QaSxdCcCCHSryy8As4ex7EBE 1JoUuZMOtqPylKzDMs+6IepUuLPU6dpql6OoTaaaPBaiS6w2TzncvQdDBbENCCtf1JSl up2Q== X-Forwarded-Encrypted: i=1; AJvYcCXAlSIIyqhimMTyMSJyKKnkNiGkK5sGGmMqbBlqQdDKQFPbDqAMjM/LY/KxtaIaObTcPNlwW2SQEx2PYvcQ9ED3b6m2aH7b0e4jmIVw5P5EWncuBqX9+qrmAY9sgiszpWkDWfXFMu4STmkZaIN/AR90IuE7RR4Ts9+5Kcq7rCy1oBpU3jvB0lWE X-Gm-Message-State: AOJu0Yznto4b6P9Dv++sdSSRX30aGLCJv1erAWw8fG60x0ktnc4lkCuW gUrjntxFo61O8fNY6V5B+9Hf7n446V98Y71UsXXpmC+0DVxUPR/Y X-Google-Smtp-Source: AGHT+IHifzzg2lD/gIcbk0C5dUQ6zGLJTZG73r4tkP3WcwfvyVMQPOdquFhJW5NN1xIi9nnz1txFyA== X-Received: by 2002:a05:6512:234f:b0:519:5ed4:c901 with SMTP id p15-20020a056512234f00b005195ed4c901mr2474048lfu.48.1714478458085; Tue, 30 Apr 2024 05:00:58 -0700 (PDT) Received: from fedora ([213.255.186.46]) by smtp.gmail.com with ESMTPSA id bp7-20020a056512158700b0051bad975671sm2576573lfb.25.2024.04.30.05.00.56 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Tue, 30 Apr 2024 05:00:56 -0700 (PDT) Date: Tue, 30 Apr 2024 15:00:51 +0300 From: Matti Vaittinen To: Matti Vaittinen , Matti Vaittinen Cc: Lee Jones , Rob Herring , Krzysztof Kozlowski , Conor Dooley , Liam Girdwood , Mark Brown , Matti Vaittinen , Wim Van Sebroeck , Guenter Roeck , devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-watchdog@vger.kernel.org Subject: [PATCH v1 3/6] mfd: support ROHM BD96801 PMIC core Message-ID: <91eafc06728ebb6158d86b58ce987fc8f802a453.1714478142.git.mazziesaccount@gmail.com> References: Precedence: bulk X-Mailing-List: linux-watchdog@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 Content-Disposition: inline In-Reply-To: The ROHM BD96801 PMIC is highly customizable automotive grade PMIC which integrates regulator and watchdog funtionalities. Provide INTB IRQ and register accesses for regulator/watchdog drivers. Signed-off-by: Matti Vaittinen --- Changelog: RFCv2 => v1: - drop ERRB interrupts (for now) - bd96801: Unlock registers in core driver Changelog: RFCv1 => RFCv2 - Work-around the IRQ domain name conflict - Add watchdog IRQ - Various styling fixes based on review by Lee --- drivers/mfd/Kconfig | 13 ++ drivers/mfd/Makefile | 1 + drivers/mfd/rohm-bd96801.c | 278 +++++++++++++++++++++++++++++++ include/linux/mfd/rohm-bd96801.h | 215 ++++++++++++++++++++++++ include/linux/mfd/rohm-generic.h | 1 + 5 files changed, 508 insertions(+) create mode 100644 drivers/mfd/rohm-bd96801.c create mode 100644 include/linux/mfd/rohm-bd96801.h diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig index 4b023ee229cf..9e874453d94d 100644 --- a/drivers/mfd/Kconfig +++ b/drivers/mfd/Kconfig @@ -2089,6 +2089,19 @@ config MFD_ROHM_BD957XMUF BD9573MUF Power Management ICs. BD9576 and BD9573 are primarily designed to be used to power R-Car series processors. +config MFD_ROHM_BD96801 + tristate "ROHM BD96801 Power Management IC" + depends on I2C=y + depends on OF + select REGMAP_I2C + select REGMAP_IRQ + select MFD_CORE + help + Select this option to get support for the ROHM BD96801 Power + Management IC. The ROHM BD96801 is a highly scalable Power Management + IC for industrial and automotive use. The BD96801 can be used as a + master PMIC in a chained PMIC solution with suitable companion PMICs. + config MFD_STM32_LPTIMER tristate "Support for STM32 Low-Power Timer" depends on (ARCH_STM32 && OF) || COMPILE_TEST diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile index c66f07edcd0e..e792892d4a8b 100644 --- a/drivers/mfd/Makefile +++ b/drivers/mfd/Makefile @@ -264,6 +264,7 @@ obj-$(CONFIG_RAVE_SP_CORE) += rave-sp.o obj-$(CONFIG_MFD_ROHM_BD71828) += rohm-bd71828.o obj-$(CONFIG_MFD_ROHM_BD718XX) += rohm-bd718x7.o obj-$(CONFIG_MFD_ROHM_BD957XMUF) += rohm-bd9576.o +obj-$(CONFIG_MFD_ROHM_BD96801) += rohm-bd96801.o obj-$(CONFIG_MFD_STMFX) += stmfx.o obj-$(CONFIG_MFD_KHADAS_MCU) += khadas-mcu.o obj-$(CONFIG_MFD_ACER_A500_EC) += acer-ec-a500.o diff --git a/drivers/mfd/rohm-bd96801.c b/drivers/mfd/rohm-bd96801.c new file mode 100644 index 000000000000..1e9c49c857c1 --- /dev/null +++ b/drivers/mfd/rohm-bd96801.c @@ -0,0 +1,278 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Copyright (C) 2024 ROHM Semiconductors + * + * ROHM BD96801 PMIC driver + * + * This version of the "BD86801 scalable PMIC"'s driver supports only very + * basic set of the PMIC features. Most notably, there is no support for + * the ERRB interrupt and the configurations which should be done when the + * PMIC is in STBY mode. + * + * Supporting the ERRB interrupt would require dropping the regmap-IRQ + * usage or working around (or accepting a presense of) a naming conflict + * in debugFS IRQs. + * + * Being able to reliably do the configurations like changing the + * regulator safety limits (like limits for the over/under -voltages, over + * current, thermal protection) would require the configuring driver to be + * synchronized with entity causing the PMIC state transitions. Eg, one + * should be able to ensure the PMIC is in STBY state when the + * configurations are applied to the hardware. How and when the PMIC state + * transitions are to be done is likely to be very system specific, as will + * be the need to configure these safety limits. Hence it's not simple to + * come up with a generic solution. + * + * Users who require the ERRB handling and STBY state configurations can + * have a look at the original RFC: + * https://lore.kernel.org/all/cover.1712920132.git.mazziesaccount@gmail.com/ + * which implements a workaround to debugFS naming conflict and some of + * the safety limit configurations - but leaves the state change handling + * and synchronization to be implemented. + * + * It would be great to hear (and receive a patch!) if you implement the + * STBY configuration support or a proper fix to the debugFS naming + * conflict in your downstream driver ;) + */ + +#include +#include +#include +#include +#include +#include +#include + +#include +#include +static const struct resource regulator_intb_irqs[] = { + DEFINE_RES_IRQ_NAMED(BD96801_TW_STAT, "bd96801-core-thermal"), + + DEFINE_RES_IRQ_NAMED(BD96801_BUCK1_OCPH_STAT, "bd96801-buck1-overcurr-h"), + DEFINE_RES_IRQ_NAMED(BD96801_BUCK1_OCPL_STAT, "bd96801-buck1-overcurr-l"), + DEFINE_RES_IRQ_NAMED(BD96801_BUCK1_OCPN_STAT, "bd96801-buck1-overcurr-n"), + DEFINE_RES_IRQ_NAMED(BD96801_BUCK1_OVD_STAT, "bd96801-buck1-overvolt"), + DEFINE_RES_IRQ_NAMED(BD96801_BUCK1_UVD_STAT, "bd96801-buck1-undervolt"), + DEFINE_RES_IRQ_NAMED(BD96801_BUCK1_TW_CH_STAT, "bd96801-buck1-thermal"), + + DEFINE_RES_IRQ_NAMED(BD96801_BUCK2_OCPH_STAT, "bd96801-buck2-overcurr-h"), + DEFINE_RES_IRQ_NAMED(BD96801_BUCK2_OCPL_STAT, "bd96801-buck2-overcurr-l"), + DEFINE_RES_IRQ_NAMED(BD96801_BUCK2_OCPN_STAT, "bd96801-buck2-overcurr-n"), + DEFINE_RES_IRQ_NAMED(BD96801_BUCK2_OVD_STAT, "bd96801-buck2-overvolt"), + DEFINE_RES_IRQ_NAMED(BD96801_BUCK2_UVD_STAT, "bd96801-buck2-undervolt"), + DEFINE_RES_IRQ_NAMED(BD96801_BUCK2_TW_CH_STAT, "bd96801-buck2-thermal"), + + DEFINE_RES_IRQ_NAMED(BD96801_BUCK3_OCPH_STAT, "bd96801-buck3-overcurr-h"), + DEFINE_RES_IRQ_NAMED(BD96801_BUCK3_OCPL_STAT, "bd96801-buck3-overcurr-l"), + DEFINE_RES_IRQ_NAMED(BD96801_BUCK3_OCPN_STAT, "bd96801-buck3-overcurr-n"), + DEFINE_RES_IRQ_NAMED(BD96801_BUCK3_OVD_STAT, "bd96801-buck3-overvolt"), + DEFINE_RES_IRQ_NAMED(BD96801_BUCK3_UVD_STAT, "bd96801-buck3-undervolt"), + DEFINE_RES_IRQ_NAMED(BD96801_BUCK3_TW_CH_STAT, "bd96801-buck3-thermal"), + + DEFINE_RES_IRQ_NAMED(BD96801_BUCK4_OCPH_STAT, "bd96801-buck4-overcurr-h"), + DEFINE_RES_IRQ_NAMED(BD96801_BUCK4_OCPL_STAT, "bd96801-buck4-overcurr-l"), + DEFINE_RES_IRQ_NAMED(BD96801_BUCK4_OCPN_STAT, "bd96801-buck4-overcurr-n"), + DEFINE_RES_IRQ_NAMED(BD96801_BUCK4_OVD_STAT, "bd96801-buck4-overvolt"), + DEFINE_RES_IRQ_NAMED(BD96801_BUCK4_UVD_STAT, "bd96801-buck4-undervolt"), + DEFINE_RES_IRQ_NAMED(BD96801_BUCK4_TW_CH_STAT, "bd96801-buck4-thermal"), + + DEFINE_RES_IRQ_NAMED(BD96801_LDO5_OCPH_STAT, "bd96801-ldo5-overcurr"), + DEFINE_RES_IRQ_NAMED(BD96801_LDO5_OVD_STAT, "bd96801-ldo5-overvolt"), + DEFINE_RES_IRQ_NAMED(BD96801_LDO5_UVD_STAT, "bd96801-ldo5-undervolt"), + + DEFINE_RES_IRQ_NAMED(BD96801_LDO6_OCPH_STAT, "bd96801-ldo6-overcurr"), + DEFINE_RES_IRQ_NAMED(BD96801_LDO6_OVD_STAT, "bd96801-ldo6-overvolt"), + DEFINE_RES_IRQ_NAMED(BD96801_LDO6_UVD_STAT, "bd96801-ldo6-undervolt"), + + DEFINE_RES_IRQ_NAMED(BD96801_LDO7_OCPH_STAT, "bd96801-ldo7-overcurr"), + DEFINE_RES_IRQ_NAMED(BD96801_LDO7_OVD_STAT, "bd96801-ldo7-overvolt"), + DEFINE_RES_IRQ_NAMED(BD96801_LDO7_UVD_STAT, "bd96801-ldo7-undervolt"), +}; + +static const struct resource wdg_intb_irqs[] = { + DEFINE_RES_IRQ_NAMED(BD96801_WDT_ERR_STAT, "bd96801-wdg"), +}; + +enum { + WDG_CELL = 0, + REGULATOR_CELL, +}; + +static struct mfd_cell bd96801_mfd_cells[] = { + { + .name = "bd96801-wdt", + .resources = wdg_intb_irqs, + .num_resources = ARRAY_SIZE(wdg_intb_irqs), + }, { + .name = "bd96801-pmic", + .resources = regulator_intb_irqs, + .num_resources = ARRAY_SIZE(regulator_intb_irqs), + }, +}; + +static const struct regmap_range bd96801_volatile_ranges[] = { + /* Status regs */ + regmap_reg_range(BD96801_REG_WD_FEED, BD96801_REG_WD_FAILCOUNT), + regmap_reg_range(BD96801_REG_WD_ASK, BD96801_REG_WD_ASK), + regmap_reg_range(BD96801_REG_WD_STATUS, BD96801_REG_WD_STATUS), + regmap_reg_range(BD96801_REG_PMIC_STATE, BD96801_REG_INT_LDO7_INTB), + /* Registers which do not update value unless PMIC is in STBY */ + regmap_reg_range(BD96801_REG_SSCG_CTRL, BD96801_REG_SHD_INTB), + regmap_reg_range(BD96801_REG_BUCK_OVP, BD96801_REG_BOOT_OVERTIME), + /* + * LDO control registers have single bit (LDO MODE) which does not + * change when we write it unless PMIC is in STBY. It's safer to not + * cache it. + */ + regmap_reg_range(BD96801_LDO5_VOL_LVL_REG, BD96801_LDO7_VOL_LVL_REG), +}; + +static const struct regmap_access_table volatile_regs = { + .yes_ranges = bd96801_volatile_ranges, + .n_yes_ranges = ARRAY_SIZE(bd96801_volatile_ranges), +}; + +static const struct regmap_irq bd96801_intb_irqs[] = { + /* STATUS SYSTEM INTB */ + REGMAP_IRQ_REG(BD96801_TW_STAT, 0, BD96801_TW_STAT_MASK), + REGMAP_IRQ_REG(BD96801_WDT_ERR_STAT, 0, BD96801_WDT_ERR_STAT_MASK), + REGMAP_IRQ_REG(BD96801_I2C_ERR_STAT, 0, BD96801_I2C_ERR_STAT_MASK), + REGMAP_IRQ_REG(BD96801_CHIP_IF_ERR_STAT, 0, BD96801_CHIP_IF_ERR_STAT_MASK), + /* STATUS BUCK1 INTB */ + REGMAP_IRQ_REG(BD96801_BUCK1_OCPH_STAT, 1, BD96801_BUCK_OCPH_STAT_MASK), + REGMAP_IRQ_REG(BD96801_BUCK1_OCPL_STAT, 1, BD96801_BUCK_OCPL_STAT_MASK), + REGMAP_IRQ_REG(BD96801_BUCK1_OCPN_STAT, 1, BD96801_BUCK_OCPN_STAT_MASK), + REGMAP_IRQ_REG(BD96801_BUCK1_OVD_STAT, 1, BD96801_BUCK_OVD_STAT_MASK), + REGMAP_IRQ_REG(BD96801_BUCK1_UVD_STAT, 1, BD96801_BUCK_UVD_STAT_MASK), + REGMAP_IRQ_REG(BD96801_BUCK1_TW_CH_STAT, 1, BD96801_BUCK_TW_CH_STAT_MASK), + /* BUCK 2 INTB */ + REGMAP_IRQ_REG(BD96801_BUCK2_OCPH_STAT, 2, BD96801_BUCK_OCPH_STAT_MASK), + REGMAP_IRQ_REG(BD96801_BUCK2_OCPL_STAT, 2, BD96801_BUCK_OCPL_STAT_MASK), + REGMAP_IRQ_REG(BD96801_BUCK2_OCPN_STAT, 2, BD96801_BUCK_OCPN_STAT_MASK), + REGMAP_IRQ_REG(BD96801_BUCK2_OVD_STAT, 2, BD96801_BUCK_OVD_STAT_MASK), + REGMAP_IRQ_REG(BD96801_BUCK2_UVD_STAT, 2, BD96801_BUCK_UVD_STAT_MASK), + REGMAP_IRQ_REG(BD96801_BUCK2_TW_CH_STAT, 2, BD96801_BUCK_TW_CH_STAT_MASK), + /* BUCK 3 INTB */ + REGMAP_IRQ_REG(BD96801_BUCK3_OCPH_STAT, 3, BD96801_BUCK_OCPH_STAT_MASK), + REGMAP_IRQ_REG(BD96801_BUCK3_OCPL_STAT, 3, BD96801_BUCK_OCPL_STAT_MASK), + REGMAP_IRQ_REG(BD96801_BUCK3_OCPN_STAT, 3, BD96801_BUCK_OCPN_STAT_MASK), + REGMAP_IRQ_REG(BD96801_BUCK3_OVD_STAT, 3, BD96801_BUCK_OVD_STAT_MASK), + REGMAP_IRQ_REG(BD96801_BUCK3_UVD_STAT, 3, BD96801_BUCK_UVD_STAT_MASK), + REGMAP_IRQ_REG(BD96801_BUCK3_TW_CH_STAT, 3, BD96801_BUCK_TW_CH_STAT_MASK), + /* BUCK 4 INTB */ + REGMAP_IRQ_REG(BD96801_BUCK4_OCPH_STAT, 4, BD96801_BUCK_OCPH_STAT_MASK), + REGMAP_IRQ_REG(BD96801_BUCK4_OCPL_STAT, 4, BD96801_BUCK_OCPL_STAT_MASK), + REGMAP_IRQ_REG(BD96801_BUCK4_OCPN_STAT, 4, BD96801_BUCK_OCPN_STAT_MASK), + REGMAP_IRQ_REG(BD96801_BUCK4_OVD_STAT, 4, BD96801_BUCK_OVD_STAT_MASK), + REGMAP_IRQ_REG(BD96801_BUCK4_UVD_STAT, 4, BD96801_BUCK_UVD_STAT_MASK), + REGMAP_IRQ_REG(BD96801_BUCK4_TW_CH_STAT, 4, BD96801_BUCK_TW_CH_STAT_MASK), + /* LDO5 INTB */ + REGMAP_IRQ_REG(BD96801_LDO5_OCPH_STAT, 5, BD96801_LDO_OCPH_STAT_MASK), + REGMAP_IRQ_REG(BD96801_LDO5_OVD_STAT, 5, BD96801_LDO_OVD_STAT_MASK), + REGMAP_IRQ_REG(BD96801_LDO5_UVD_STAT, 5, BD96801_LDO_UVD_STAT_MASK), + /* LDO6 INTB */ + REGMAP_IRQ_REG(BD96801_LDO6_OCPH_STAT, 6, BD96801_LDO_OCPH_STAT_MASK), + REGMAP_IRQ_REG(BD96801_LDO6_OVD_STAT, 6, BD96801_LDO_OVD_STAT_MASK), + REGMAP_IRQ_REG(BD96801_LDO6_UVD_STAT, 6, BD96801_LDO_UVD_STAT_MASK), + /* LDO7 INTB */ + REGMAP_IRQ_REG(BD96801_LDO7_OCPH_STAT, 7, BD96801_LDO_OCPH_STAT_MASK), + REGMAP_IRQ_REG(BD96801_LDO7_OVD_STAT, 7, BD96801_LDO_OVD_STAT_MASK), + REGMAP_IRQ_REG(BD96801_LDO7_UVD_STAT, 7, BD96801_LDO_UVD_STAT_MASK), +}; + +static struct regmap_irq_chip bd96801_irq_chip_intb = { + .name = "bd96801-irq-intb", + .main_status = BD96801_REG_INT_MAIN, + .num_main_regs = 1, + .irqs = &bd96801_intb_irqs[0], + .num_irqs = ARRAY_SIZE(bd96801_intb_irqs), + .status_base = BD96801_REG_INT_SYS_INTB, + .mask_base = BD96801_REG_MASK_SYS_INTB, + .ack_base = BD96801_REG_INT_SYS_INTB, + .init_ack_masked = true, + .num_regs = 8, + .irq_reg_stride = 1, +}; + +static const struct regmap_config bd96801_regmap_config = { + .reg_bits = 8, + .val_bits = 8, + .volatile_table = &volatile_regs, + .cache_type = REGCACHE_RBTREE, +}; + +static int bd96801_i2c_probe(struct i2c_client *i2c) +{ + struct regmap *regmap; + int ret, intb_irq; + struct regmap_irq_chip_data *intb_irq_data; + struct irq_domain *intb_domain; + const struct fwnode_handle *fwnode; + + fwnode = dev_fwnode(&i2c->dev); + if (!fwnode) + return dev_err_probe(&i2c->dev, -EINVAL, "no fwnode\n"); + + intb_irq = fwnode_irq_get_byname(fwnode, "intb"); + if (intb_irq < 0) + return dev_err_probe(&i2c->dev, intb_irq, "No INTB IRQ configured\n"); + + regmap = devm_regmap_init_i2c(i2c, &bd96801_regmap_config); + if (IS_ERR(regmap)) + return dev_err_probe(&i2c->dev, PTR_ERR(regmap), + "regmap initialization failed\n"); + + ret = regmap_write(regmap, BD96801_LOCK_REG, BD96801_UNLOCK); + if (ret) + return dev_err_probe(&i2c->dev, ret, "Can't unlock PMIC\n"); + + ret = devm_regmap_add_irq_chip(&i2c->dev, regmap, intb_irq, + IRQF_ONESHOT, 0, &bd96801_irq_chip_intb, + &intb_irq_data); + if (ret) + return dev_err_probe(&i2c->dev, ret, "Failed to add INTB irq_chip\n"); + + intb_domain = regmap_irq_get_domain(intb_irq_data); + + ret = devm_mfd_add_devices(&i2c->dev, PLATFORM_DEVID_AUTO, + bd96801_mfd_cells, + ARRAY_SIZE(bd96801_mfd_cells), NULL, 0, + intb_domain); + + if (ret) + dev_err(&i2c->dev, "Failed to create subdevices\n"); + + return ret; +} + +static const struct of_device_id bd96801_of_match[] = { + { .compatible = "rohm,bd96801", }, + { } +}; +MODULE_DEVICE_TABLE(of, bd96801_of_match); + +static struct i2c_driver bd96801_i2c_driver = { + .driver = { + .name = "rohm-bd96801", + .of_match_table = bd96801_of_match, + }, + .probe = bd96801_i2c_probe, +}; + +static int __init bd96801_i2c_init(void) +{ + return i2c_add_driver(&bd96801_i2c_driver); +} + +/* Initialise early so consumer devices can complete system boot? */ +subsys_initcall(bd96801_i2c_init); + +static void __exit bd96801_i2c_exit(void) +{ + i2c_del_driver(&bd96801_i2c_driver); +} +module_exit(bd96801_i2c_exit); + +MODULE_AUTHOR("Matti Vaittinen "); +MODULE_DESCRIPTION("ROHM BD96801 Power Management IC driver"); +MODULE_LICENSE("GPL"); diff --git a/include/linux/mfd/rohm-bd96801.h b/include/linux/mfd/rohm-bd96801.h new file mode 100644 index 000000000000..e2d9e10b6364 --- /dev/null +++ b/include/linux/mfd/rohm-bd96801.h @@ -0,0 +1,215 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +/* Copyright (C) 2024 ROHM Semiconductors */ + +#ifndef __MFD_BD96801_H__ +#define __MFD_BD96801_H__ + +#define BD96801_REG_SSCG_CTRL 0x09 +#define BD96801_REG_SHD_INTB 0x20 +#define BD96801_LDO5_VOL_LVL_REG 0x2c +#define BD96801_LDO6_VOL_LVL_REG 0x2d +#define BD96801_LDO7_VOL_LVL_REG 0x2e +#define BD96801_REG_BUCK_OVP 0x30 +#define BD96801_REG_BUCK_OVD 0x35 +#define BD96801_REG_LDO_OVP 0x31 +#define BD96801_REG_LDO_OVD 0x36 +#define BD96801_REG_BOOT_OVERTIME 0x3a +#define BD96801_REG_WD_TMO 0x40 +#define BD96801_REG_WD_CONF 0x41 +#define BD96801_REG_WD_FEED 0x42 +#define BD96801_REG_WD_FAILCOUNT 0x43 +#define BD96801_REG_WD_ASK 0x46 +#define BD96801_REG_WD_STATUS 0x4a +#define BD96801_REG_PMIC_STATE 0x4f +#define BD96801_REG_EXT_STATE 0x50 + +#define BD96801_STATE_STBY 0x09 + +#define BD96801_LOCK_REG 0x04 +#define BD96801_UNLOCK 0x9d +#define BD96801_LOCK 0x00 + +/* IRQ register area */ +#define BD96801_REG_INT_MAIN 0x51 + +/* + * The BD96801 has two physical IRQ lines, INTB and ERRB. + * + * The 'main status register' is located at 0x51. + * The ERRB status registers are located at 0x52 ... 0x5B + * INTB status registers are at range 0x5c ... 0x63 + */ +#define BD96801_REG_INT_SYS_ERRB1 0x52 +#define BD96801_REG_INT_SYS_INTB 0x5c +#define BD96801_REG_INT_LDO7_INTB 0x63 + +/* MASK registers */ +#define BD96801_REG_MASK_SYS_INTB 0x73 +#define BD96801_REG_MASK_SYS_ERRB 0x69 + +#define BD96801_MAX_REGISTER 0x7a + +#define BD96801_OTP_ERR_MASK BIT(0) +#define BD96801_DBIST_ERR_MASK BIT(1) +#define BD96801_EEP_ERR_MASK BIT(2) +#define BD96801_ABIST_ERR_MASK BIT(3) +#define BD96801_PRSTB_ERR_MASK BIT(4) +#define BD96801_DRMOS1_ERR_MASK BIT(5) +#define BD96801_DRMOS2_ERR_MASK BIT(6) +#define BD96801_SLAVE_ERR_MASK BIT(7) +#define BD96801_VREF_ERR_MASK BIT(0) +#define BD96801_TSD_ERR_MASK BIT(1) +#define BD96801_UVLO_ERR_MASK BIT(2) +#define BD96801_OVLO_ERR_MASK BIT(3) +#define BD96801_OSC_ERR_MASK BIT(4) +#define BD96801_PON_ERR_MASK BIT(5) +#define BD96801_POFF_ERR_MASK BIT(6) +#define BD96801_CMD_SHDN_ERR_MASK BIT(7) +#define BD96801_INT_PRSTB_WDT_ERR_MASK BIT(0) +#define BD96801_INT_CHIP_IF_ERR_MASK BIT(3) +#define BD96801_INT_SHDN_ERR_MASK BIT(7) +#define BD96801_OUT_PVIN_ERR_MASK BIT(0) +#define BD96801_OUT_OVP_ERR_MASK BIT(1) +#define BD96801_OUT_UVP_ERR_MASK BIT(2) +#define BD96801_OUT_SHDN_ERR_MASK BIT(7) + +/* ERRB IRQs */ +enum { + /* Reg 0x52, 0x53, 0x54 - ERRB system IRQs */ + BD96801_OTP_ERR_STAT, + BD96801_DBIST_ERR_STAT, + BD96801_EEP_ERR_STAT, + BD96801_ABIST_ERR_STAT, + BD96801_PRSTB_ERR_STAT, + BD96801_DRMOS1_ERR_STAT, + BD96801_DRMOS2_ERR_STAT, + BD96801_SLAVE_ERR_STAT, + BD96801_VREF_ERR_STAT, + BD96801_TSD_ERR_STAT, + BD96801_UVLO_ERR_STAT, + BD96801_OVLO_ERR_STAT, + BD96801_OSC_ERR_STAT, + BD96801_PON_ERR_STAT, + BD96801_POFF_ERR_STAT, + BD96801_CMD_SHDN_ERR_STAT, + BD96801_INT_PRSTB_WDT_ERR, + BD96801_INT_CHIP_IF_ERR, + BD96801_INT_SHDN_ERR_STAT, + + /* Reg 0x55 BUCK1 ERR IRQs */ + BD96801_BUCK1_PVIN_ERR_STAT, + BD96801_BUCK1_OVP_ERR_STAT, + BD96801_BUCK1_UVP_ERR_STAT, + BD96801_BUCK1_SHDN_ERR_STAT, + + /* Reg 0x56 BUCK2 ERR IRQs */ + BD96801_BUCK2_PVIN_ERR_STAT, + BD96801_BUCK2_OVP_ERR_STAT, + BD96801_BUCK2_UVP_ERR_STAT, + BD96801_BUCK2_SHDN_ERR_STAT, + + /* Reg 0x57 BUCK3 ERR IRQs */ + BD96801_BUCK3_PVIN_ERR_STAT, + BD96801_BUCK3_OVP_ERR_STAT, + BD96801_BUCK3_UVP_ERR_STAT, + BD96801_BUCK3_SHDN_ERR_STAT, + + /* Reg 0x58 BUCK4 ERR IRQs */ + BD96801_BUCK4_PVIN_ERR_STAT, + BD96801_BUCK4_OVP_ERR_STAT, + BD96801_BUCK4_UVP_ERR_STAT, + BD96801_BUCK4_SHDN_ERR_STAT, + + /* Reg 0x59 LDO5 ERR IRQs */ + BD96801_LDO5_PVIN_ERR_STAT, + BD96801_LDO5_OVP_ERR_STAT, + BD96801_LDO5_UVP_ERR_STAT, + BD96801_LDO5_SHDN_ERR_STAT, + + /* Reg 0x5a LDO6 ERR IRQs */ + BD96801_LDO6_PVIN_ERR_STAT, + BD96801_LDO6_OVP_ERR_STAT, + BD96801_LDO6_UVP_ERR_STAT, + BD96801_LDO6_SHDN_ERR_STAT, + + /* Reg 0x5b LDO7 ERR IRQs */ + BD96801_LDO7_PVIN_ERR_STAT, + BD96801_LDO7_OVP_ERR_STAT, + BD96801_LDO7_UVP_ERR_STAT, + BD96801_LDO7_SHDN_ERR_STAT, +}; + +/* INTB IRQs */ +enum { + /* Reg 0x5c (System INTB) */ + BD96801_TW_STAT, + BD96801_WDT_ERR_STAT, + BD96801_I2C_ERR_STAT, + BD96801_CHIP_IF_ERR_STAT, + + /* Reg 0x5d (BUCK1 INTB) */ + BD96801_BUCK1_OCPH_STAT, + BD96801_BUCK1_OCPL_STAT, + BD96801_BUCK1_OCPN_STAT, + BD96801_BUCK1_OVD_STAT, + BD96801_BUCK1_UVD_STAT, + BD96801_BUCK1_TW_CH_STAT, + + /* Reg 0x5e (BUCK2 INTB) */ + BD96801_BUCK2_OCPH_STAT, + BD96801_BUCK2_OCPL_STAT, + BD96801_BUCK2_OCPN_STAT, + BD96801_BUCK2_OVD_STAT, + BD96801_BUCK2_UVD_STAT, + BD96801_BUCK2_TW_CH_STAT, + + /* Reg 0x5f (BUCK3 INTB)*/ + BD96801_BUCK3_OCPH_STAT, + BD96801_BUCK3_OCPL_STAT, + BD96801_BUCK3_OCPN_STAT, + BD96801_BUCK3_OVD_STAT, + BD96801_BUCK3_UVD_STAT, + BD96801_BUCK3_TW_CH_STAT, + + /* Reg 0x60 (BUCK4 INTB)*/ + BD96801_BUCK4_OCPH_STAT, + BD96801_BUCK4_OCPL_STAT, + BD96801_BUCK4_OCPN_STAT, + BD96801_BUCK4_OVD_STAT, + BD96801_BUCK4_UVD_STAT, + BD96801_BUCK4_TW_CH_STAT, + + /* Reg 0x61 (LDO5 INTB) */ + BD96801_LDO5_OCPH_STAT, /* bit [0] */ + BD96801_LDO5_OVD_STAT, /* bit [3] */ + BD96801_LDO5_UVD_STAT, /* bit [4] */ + + /* Reg 0x62 (LDO6 INTB) */ + BD96801_LDO6_OCPH_STAT, /* bit [0] */ + BD96801_LDO6_OVD_STAT, /* bit [3] */ + BD96801_LDO6_UVD_STAT, /* bit [4] */ + + /* Reg 0x63 (LDO7 INTB) */ + BD96801_LDO7_OCPH_STAT, /* bit [0] */ + BD96801_LDO7_OVD_STAT, /* bit [3] */ + BD96801_LDO7_UVD_STAT, /* bit [4] */ +}; + +/* IRQ MASKs */ +#define BD96801_TW_STAT_MASK BIT(0) +#define BD96801_WDT_ERR_STAT_MASK BIT(1) +#define BD96801_I2C_ERR_STAT_MASK BIT(2) +#define BD96801_CHIP_IF_ERR_STAT_MASK BIT(3) + +#define BD96801_BUCK_OCPH_STAT_MASK BIT(0) +#define BD96801_BUCK_OCPL_STAT_MASK BIT(1) +#define BD96801_BUCK_OCPN_STAT_MASK BIT(2) +#define BD96801_BUCK_OVD_STAT_MASK BIT(3) +#define BD96801_BUCK_UVD_STAT_MASK BIT(4) +#define BD96801_BUCK_TW_CH_STAT_MASK BIT(5) + +#define BD96801_LDO_OCPH_STAT_MASK BIT(0) +#define BD96801_LDO_OVD_STAT_MASK BIT(3) +#define BD96801_LDO_UVD_STAT_MASK BIT(4) + +#endif diff --git a/include/linux/mfd/rohm-generic.h b/include/linux/mfd/rohm-generic.h index 4eeb22876bad..e7d4e6afe388 100644 --- a/include/linux/mfd/rohm-generic.h +++ b/include/linux/mfd/rohm-generic.h @@ -16,6 +16,7 @@ enum rohm_chip_type { ROHM_CHIP_TYPE_BD71828, ROHM_CHIP_TYPE_BD71837, ROHM_CHIP_TYPE_BD71847, + ROHM_CHIP_TYPE_BD96801, ROHM_CHIP_TYPE_AMOUNT }; From patchwork Tue Apr 30 12:01:13 2024 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Matti Vaittinen X-Patchwork-Id: 13648845 Received: from mail-lf1-f47.google.com (mail-lf1-f47.google.com [209.85.167.47]) (using TLSv1.2 with cipher ECDHE-RSA-AES128-GCM-SHA256 (128/128 bits)) (No client certificate requested) by smtp.subspace.kernel.org (Postfix) with ESMTPS id 0B5DC13D272; Tue, 30 Apr 2024 12:01:21 +0000 (UTC) Authentication-Results: smtp.subspace.kernel.org; arc=none smtp.client-ip=209.85.167.47 ARC-Seal: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1714478484; cv=none; b=supNviE7wXKz6R5Gwpi0Z56MoYJutiLESYCQGx5UhYlpfQmidmnvyt9JWsoLMKcHQywdEpWy4E3Vhh7UWLsytMFDR+RKrkQ/TqBvABeCmbxebdB+YoJQ4x7E6K5UkGS3k4RlodEH6Me8SyDwKCmPAgDjYfuyBeJ5IBKwj3fu944= ARC-Message-Signature: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1714478484; c=relaxed/simple; bh=6BFb3MMSpn4jMPjSsbWh32ZxsiOYk401fySrNPeSZvU=; h=Date:From:To:Cc:Subject:Message-ID:References:MIME-Version: Content-Type:Content-Disposition:In-Reply-To; b=hFDac0daa2WSWOon8tD1QHszp3k/wE2ssfc/xDRzIKc1pKw85TTDDM1oEs9rI/MNKkOTBevvG7+R8npOMOXuIMRHcgfmWsA2Fr7YvGyv+vhEoQsokwXDW76XKEUUI829wyr7+ozFsDRoJr1MknJ08sWhSAOf/WKwlpJeyK/kYho= ARC-Authentication-Results: i=1; smtp.subspace.kernel.org; dmarc=pass (p=none dis=none) header.from=gmail.com; spf=pass smtp.mailfrom=gmail.com; dkim=pass (2048-bit key) header.d=gmail.com header.i=@gmail.com header.b=FoJkPDsv; arc=none smtp.client-ip=209.85.167.47 Authentication-Results: smtp.subspace.kernel.org; dmarc=pass (p=none dis=none) header.from=gmail.com Authentication-Results: smtp.subspace.kernel.org; spf=pass smtp.mailfrom=gmail.com Authentication-Results: smtp.subspace.kernel.org; dkim=pass (2048-bit key) header.d=gmail.com header.i=@gmail.com header.b="FoJkPDsv" Received: by mail-lf1-f47.google.com with SMTP id 2adb3069b0e04-51967f75729so6634651e87.0; Tue, 30 Apr 2024 05:01:21 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=20230601; t=1714478480; x=1715083280; darn=vger.kernel.org; h=in-reply-to:content-disposition:mime-version:references:message-id :subject:cc:to:from:date:from:to:cc:subject:date:message-id:reply-to; bh=o64klB2RqYmF4g/k5NGTdVVhwvnD6r++Mh1ttkHeg9o=; b=FoJkPDsvaeXnYKFfYqrWiSGxwRwjN5J3OuMyML0UUUENyVMn+3oZrvkr/SRFcsnyw/ ZYfW8sspELI3IyM3nJEBAdzEvE60QYtJHQz0rs+yoZ/NuuMHBbFPlz2yyokcr9tGlQlj WaF1bWFKvvZ7gTfu68FOHHYkzQ7J4w1WhTf+KrFwo7a2vdG9JeuQiIu0cOjMeyzR7J+I 6zrZeZ9iHh8REwtzpk9ir7YS2DWN8eKNzLnzjGkTMANzogyEmm+/neWZo7LXIChXM2vT lToeZGeBIu1UjRFSlsjUcvpMdZpF0FsFzzIM2k5taelPHZOUexWTfcUDzLvB9E1KTNYL hXxg== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20230601; t=1714478480; x=1715083280; h=in-reply-to:content-disposition:mime-version:references:message-id :subject:cc:to:from:date:x-gm-message-state:from:to:cc:subject:date :message-id:reply-to; bh=o64klB2RqYmF4g/k5NGTdVVhwvnD6r++Mh1ttkHeg9o=; b=CCy07uH9hovU3IloqHWtstHy3ZaKz3EbeItL/t53CI/bdQKboflgCIFRewCzQcu5Ug BUWEMRbAIvIuTmHYoXOcDa/GedtPhoe7/EQycOOkSvV4k/wCh08iaIW+yk332Dm72/pU zc/4ua7MvtHVR7Z0RUTxBAVoGm6H1nr0eFLt/v8uzxrzuvcyJqzXlZ/qNQmy4NE+As3T V5aUJ6b9EXTeporE+uZ0F2SER+hJCu6MIZVjcxDlaPlgCudI3t7glSXbQUaKST/lJtr0 KhX1NkyR5WDB4B2iJVG9aWeJ4n7LmVz8Aa5mqOBmd0ZAEgT9WODBc7RYj1yHs1aQsb8B IPwg== X-Forwarded-Encrypted: i=1; AJvYcCV2uS+TmloB9ZLnNNjUpK4GZyeIUB1fEq9A6yXRmBLEg+rBEO2+NOCPHT5JBfIzTIxLAwG4R/Hch4TlabZumd/0iskFf3aadqjVLBvg8AlNEmCisxm5kEQp9Gv2G7CWQivgSNIWi3Wscc4TAbQsayV/ifdn/MbjEPaB6KPSqXTF2yiSWUhPEzeX X-Gm-Message-State: AOJu0Yy2an0B/NZti4z1UH6Donkxep496aW48L4NqJt/+GR8BZKYg9nd ub93sY8wYniGNpDztLPeElkNEu9BrIoWiNI80Uukj6GMoLYUSYKu X-Google-Smtp-Source: AGHT+IEHKernDulf+q1AReYut12+/WAv746ak7h49UDc+H+R1bonN6+0b7JIiQjVRSbPMJvXKfScvg== X-Received: by 2002:a05:6512:238f:b0:51a:f16d:52a8 with SMTP id c15-20020a056512238f00b0051af16d52a8mr2103318lfv.50.1714478478903; Tue, 30 Apr 2024 05:01:18 -0700 (PDT) Received: from fedora ([213.255.186.46]) by smtp.gmail.com with ESMTPSA id r3-20020ac25a43000000b00516cdd6049dsm4466652lfn.170.2024.04.30.05.01.17 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Tue, 30 Apr 2024 05:01:17 -0700 (PDT) Date: Tue, 30 Apr 2024 15:01:13 +0300 From: Matti Vaittinen To: Matti Vaittinen , Matti Vaittinen Cc: Lee Jones , Rob Herring , Krzysztof Kozlowski , Conor Dooley , Liam Girdwood , Mark Brown , Matti Vaittinen , Wim Van Sebroeck , Guenter Roeck , devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-watchdog@vger.kernel.org Subject: [PATCH v1 4/6] regulator: bd96801: ROHM BD96801 PMIC regulators Message-ID: <4b3a06ff5f4704a28b5d680db5715e50420f8ef6.1714478142.git.mazziesaccount@gmail.com> References: Precedence: bulk X-Mailing-List: linux-watchdog@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 Content-Disposition: inline In-Reply-To: The ROHM BD96801 "Scalable PMIC" is an automotive grade PMIC which can scale to different applications by allowing chaining of PMICs. The PMIC also supports various protection features which can be configured either to fire IRQs - or to shut down power outputs when failure is detected. The driver implements basic voltage control and sending error notifications. NOTE: The driver does not support doing configuration which require the PMIC to be in STBY state. The omitted feature set includes setting safety limit values, changing LDO voltages and controlling enable state for some regulators. Also, the ERRB IRQ is not handled. Signed-off-by: Matti Vaittinen --- Revision history: RFCv2 => v1: - Drop STBY mode configurations - Drop ERRB IRQs - drop PMIC register unlock (moved to MFD to prevent races) RFCv1 => RFCv2: - Use devm_kcalloc() instead of devm_kzalloc() where appropriate - Use devm_kmemdup() - Add MODULE_DEVICE_TABLE - drop MODULE_ALIAS --- drivers/regulator/Kconfig | 12 + drivers/regulator/Makefile | 2 + drivers/regulator/bd96801-regulator.c | 896 ++++++++++++++++++++++++++ 3 files changed, 910 insertions(+) create mode 100644 drivers/regulator/bd96801-regulator.c diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig index 7db0a29b5b8d..2e8187a92952 100644 --- a/drivers/regulator/Kconfig +++ b/drivers/regulator/Kconfig @@ -268,6 +268,18 @@ config REGULATOR_BD957XMUF This driver can also be built as a module. If so, the module will be called bd9576-regulator. +config REGULATOR_BD96801 + tristate "ROHM BD96801 Power Regulator" + depends on MFD_ROHM_BD96801 + select REGULATOR_ROHM + help + This driver supports voltage regulators on ROHM BD96801 PMIC. + This will enable support for the software controllable buck + and LDO regulators. + + This driver can also be built as a module. If so, the module + will be called bd96801-regulator. + config REGULATOR_CPCAP tristate "Motorola CPCAP regulator" depends on MFD_CPCAP diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile index 46fb569e6be8..ae8896e879d5 100644 --- a/drivers/regulator/Makefile +++ b/drivers/regulator/Makefile @@ -37,6 +37,8 @@ obj-$(CONFIG_REGULATOR_BD718XX) += bd718x7-regulator.o obj-$(CONFIG_REGULATOR_BD9571MWV) += bd9571mwv-regulator.o obj-$(CONFIG_REGULATOR_BD957XMUF) += bd9576-regulator.o obj-$(CONFIG_REGULATOR_DA903X) += da903x-regulator.o +obj-$(CONFIG_REGULATOR_BD96801) += bd96801-regulator.o +obj-$(CONFIG_REGULATOR_DA903X) += da903x.o obj-$(CONFIG_REGULATOR_DA9052) += da9052-regulator.o obj-$(CONFIG_REGULATOR_DA9055) += da9055-regulator.o obj-$(CONFIG_REGULATOR_DA9062) += da9062-regulator.o diff --git a/drivers/regulator/bd96801-regulator.c b/drivers/regulator/bd96801-regulator.c new file mode 100644 index 000000000000..02857754b532 --- /dev/null +++ b/drivers/regulator/bd96801-regulator.c @@ -0,0 +1,896 @@ +// SPDX-License-Identifier: GPL-2.0 +// Copyright (C) 2024 ROHM Semiconductors +// bd96801-regulator.c ROHM BD96801 regulator driver + +/* + * This version of the "BD86801 scalable PMIC"'s driver supports only very + * basic set of the PMIC features. Most notably, there is no support for + * the ERRB interrupt and the configurations which should be done when the + * PMIC is in STBY mode. + * + * Supporting the ERRB interrupt would require dropping the regmap-IRQ + * usage or working around (or accepting a presense of) a naming conflict + * in debugFS IRQs. + * + * Being able to reliably do the configurations like changing the + * regulator safety limits (like limits for the over/under -voltages, over + * current, thermal protection) would require the configuring driver to be + * synchronized with entity causing the PMIC state transitions. Eg, one + * should be able to ensure the PMIC is in STBY state when the + * configurations are applied to the hardware. How and when the PMIC state + * transitions are to be done is likely to be very system specific, as will + * be the need to configure these safety limits. Hence it's not simple to + * come up with a generic solution. + * + * Users who require the ERRB handling and STBY state configurations can + * have a look at the original RFC: + * https://lore.kernel.org/all/cover.1712920132.git.mazziesaccount@gmail.com/ + * which implements a workaround to debugFS naming conflict and some of + * the safety limit configurations - but leaves the state change handling + * and synchronization to be implemented. + * + * It would be great to hear (and receive a patch!) if you implement the + * STBY configuration support or a proper fix to the debugFS naming + * conflict in your downstream driver ;) + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +enum { + BD96801_BUCK1, + BD96801_BUCK2, + BD96801_BUCK3, + BD96801_BUCK4, + BD96801_LDO5, + BD96801_LDO6, + BD96801_LDO7, + BD96801_REGULATOR_AMOUNT, +}; + +enum { + BD96801_PROT_OVP, + BD96801_PROT_UVP, + BD96801_PROT_OCP, + BD96801_PROT_TEMP, + BD96801_NUM_PROT, +}; + +#define BD96801_ALWAYS_ON_REG 0x3c +#define BD96801_REG_ENABLE 0x0b +#define BD96801_BUCK1_EN_MASK BIT(0) +#define BD96801_BUCK2_EN_MASK BIT(1) +#define BD96801_BUCK3_EN_MASK BIT(2) +#define BD96801_BUCK4_EN_MASK BIT(3) +#define BD96801_LDO5_EN_MASK BIT(4) +#define BD96801_LDO6_EN_MASK BIT(5) +#define BD96801_LDO7_EN_MASK BIT(6) + +#define BD96801_BUCK1_VSEL_REG 0x28 +#define BD96801_BUCK2_VSEL_REG 0x29 +#define BD96801_BUCK3_VSEL_REG 0x2a +#define BD96801_BUCK4_VSEL_REG 0x2b +#define BD96801_LDO5_VSEL_REG 0x25 +#define BD96801_LDO6_VSEL_REG 0x26 +#define BD96801_LDO7_VSEL_REG 0x27 +#define BD96801_BUCK_VSEL_MASK 0x1F +#define BD96801_LDO_VSEL_MASK 0xff + +#define BD96801_MASK_RAMP_DELAY 0xc0 +#define BD96801_INT_VOUT_BASE_REG 0x21 +#define BD96801_BUCK_INT_VOUT_MASK 0xff + +#define BD96801_BUCK_VOLTS 256 +#define BD96801_LDO_VOLTS 256 + +#define BD96801_OVP_MASK 0x03 +#define BD96801_MASK_BUCK1_OVP_SHIFT 0x00 +#define BD96801_MASK_BUCK2_OVP_SHIFT 0x02 +#define BD96801_MASK_BUCK3_OVP_SHIFT 0x04 +#define BD96801_MASK_BUCK4_OVP_SHIFT 0x06 +#define BD96801_MASK_LDO5_OVP_SHIFT 0x00 +#define BD96801_MASK_LDO6_OVP_SHIFT 0x02 +#define BD96801_MASK_LDO7_OVP_SHIFT 0x04 + +#define BD96801_PROT_LIMIT_OCP_MIN 0x00 +#define BD96801_PROT_LIMIT_LOW 0x01 +#define BD96801_PROT_LIMIT_MID 0x02 +#define BD96801_PROT_LIMIT_HI 0x03 + +#define BD96801_REG_BUCK1_OCP 0x32 +#define BD96801_REG_BUCK2_OCP 0x32 +#define BD96801_REG_BUCK3_OCP 0x33 +#define BD96801_REG_BUCK4_OCP 0x33 + +#define BD96801_MASK_BUCK1_OCP_SHIFT 0x00 +#define BD96801_MASK_BUCK2_OCP_SHIFT 0x04 +#define BD96801_MASK_BUCK3_OCP_SHIFT 0x00 +#define BD96801_MASK_BUCK4_OCP_SHIFT 0x04 + +#define BD96801_REG_LDO5_OCP 0x34 +#define BD96801_REG_LDO6_OCP 0x34 +#define BD96801_REG_LDO7_OCP 0x34 + +#define BD96801_MASK_LDO5_OCP_SHIFT 0x00 +#define BD96801_MASK_LDO6_OCP_SHIFT 0x02 +#define BD96801_MASK_LDO7_OCP_SHIFT 0x04 + +#define BD96801_MASK_SHD_INTB BIT(7) +#define BD96801_INTB_FATAL BIT(7) + +#define BD96801_NUM_REGULATORS 7 +#define BD96801_NUM_LDOS 4 + +/* + * Ramp rates for bucks are controlled by bits [7:6] as follows: + * 00 => 1 mV/uS + * 01 => 5 mV/uS + * 10 => 10 mV/uS + * 11 => 20 mV/uS + */ +static const unsigned int buck_ramp_table[] = { 1000, 5000, 10000, 20000 }; + +/* + * This is a voltage range that get's appended to selected + * bd96801_buck_init_volts value. The range from 0x0 to 0xF is actually + * bd96801_buck_init_volts + 0 ... bd96801_buck_init_volts + 150mV + * and the range from 0x10 to 0x1f is bd96801_buck_init_volts - 150mV ... + * bd96801_buck_init_volts - 0. But as the members of linear_range + * are all unsigned I will apply offset of -150 mV to value in + * linear_range - which should increase these ranges with + * 150 mV getting all the values to >= 0. + */ +static const struct linear_range bd96801_tune_volts[] = { + REGULATOR_LINEAR_RANGE(150000, 0x00, 0xF, 10000), + REGULATOR_LINEAR_RANGE(0, 0x10, 0x1F, 10000), +}; + +static const struct linear_range bd96801_buck_init_volts[] = { + REGULATOR_LINEAR_RANGE(500000 - 150000, 0x00, 0xc8, 5000), + REGULATOR_LINEAR_RANGE(1550000 - 150000, 0xc9, 0xec, 50000), + REGULATOR_LINEAR_RANGE(3300000 - 150000, 0xed, 0xff, 0), +}; + +static const struct linear_range bd96801_ldo_int_volts[] = { + REGULATOR_LINEAR_RANGE(300000, 0x00, 0x78, 25000), + REGULATOR_LINEAR_RANGE(3300000, 0x79, 0xff, 0), +}; + +#define BD96801_LDO_SD_VOLT_MASK 0x1 +#define BD96801_LDO_MODE_MASK 0x6 +#define BD96801_LDO_MODE_INT 0x0 +#define BD96801_LDO_MODE_SD 0x2 +#define BD96801_LDO_MODE_DDR 0x4 + +static int ldo_ddr_volt_table[] = {500000, 300000}; +static int ldo_sd_volt_table[] = {3300000, 1800000}; + +/* Constant IRQ initialization data (templates) */ +struct bd96801_irqinfo { + int type; + struct regulator_irq_desc irq_desc; + int err_cfg; + int wrn_cfg; + const char *irq_name; +}; + +#define BD96801_IRQINFO(_type, _name, _irqoff_ms, _irqname) \ +{ \ + .type = (_type), \ + .err_cfg = -1, \ + .wrn_cfg = -1, \ + .irq_name = (_irqname), \ + .irq_desc = { \ + .name = (_name), \ + .irq_off_ms = (_irqoff_ms), \ + .map_event = regulator_irq_map_event_simple, \ + }, \ +} + +static const struct bd96801_irqinfo buck1_irqinfo[] = { + BD96801_IRQINFO(BD96801_PROT_OCP, "buck1-over-curr-h", 500, + "bd96801-buck1-overcurr-h"), + BD96801_IRQINFO(BD96801_PROT_OCP, "buck1-over-curr-l", 500, + "bd96801-buck1-overcurr-l"), + BD96801_IRQINFO(BD96801_PROT_OCP, "buck1-over-curr-n", 500, + "bd96801-buck1-overcurr-n"), + BD96801_IRQINFO(BD96801_PROT_OVP, "buck1-over-voltage", 500, + "bd96801-buck1-overvolt"), + BD96801_IRQINFO(BD96801_PROT_UVP, "buck1-under-voltage", 500, + "bd96801-buck1-undervolt"), + BD96801_IRQINFO(BD96801_PROT_TEMP, "buck1-over-temp", 500, + "bd96801-buck1-thermal") +}; + +static const struct bd96801_irqinfo buck2_irqinfo[] = { + BD96801_IRQINFO(BD96801_PROT_OCP, "buck2-over-curr-h", 500, + "bd96801-buck2-overcurr-h"), + BD96801_IRQINFO(BD96801_PROT_OCP, "buck2-over-curr-l", 500, + "bd96801-buck2-overcurr-l"), + BD96801_IRQINFO(BD96801_PROT_OCP, "buck2-over-curr-n", 500, + "bd96801-buck2-overcurr-n"), + BD96801_IRQINFO(BD96801_PROT_OVP, "buck2-over-voltage", 500, + "bd96801-buck2-overvolt"), + BD96801_IRQINFO(BD96801_PROT_UVP, "buck2-under-voltage", 500, + "bd96801-buck2-undervolt"), + BD96801_IRQINFO(BD96801_PROT_TEMP, "buck2-over-temp", 500, + "bd96801-buck2-thermal") +}; + +static const struct bd96801_irqinfo buck3_irqinfo[] = { + BD96801_IRQINFO(BD96801_PROT_OCP, "buck3-over-curr-h", 500, + "bd96801-buck3-overcurr-h"), + BD96801_IRQINFO(BD96801_PROT_OCP, "buck3-over-curr-l", 500, + "bd96801-buck3-overcurr-l"), + BD96801_IRQINFO(BD96801_PROT_OCP, "buck3-over-curr-n", 500, + "bd96801-buck3-overcurr-n"), + BD96801_IRQINFO(BD96801_PROT_OVP, "buck3-over-voltage", 500, + "bd96801-buck3-overvolt"), + BD96801_IRQINFO(BD96801_PROT_UVP, "buck3-under-voltage", 500, + "bd96801-buck3-undervolt"), + BD96801_IRQINFO(BD96801_PROT_TEMP, "buck3-over-temp", 500, + "bd96801-buck3-thermal") +}; + +static const struct bd96801_irqinfo buck4_irqinfo[] = { + BD96801_IRQINFO(BD96801_PROT_OCP, "buck4-over-curr-h", 500, + "bd96801-buck4-overcurr-h"), + BD96801_IRQINFO(BD96801_PROT_OCP, "buck4-over-curr-l", 500, + "bd96801-buck4-overcurr-l"), + BD96801_IRQINFO(BD96801_PROT_OCP, "buck4-over-curr-n", 500, + "bd96801-buck4-overcurr-n"), + BD96801_IRQINFO(BD96801_PROT_OVP, "buck4-over-voltage", 500, + "bd96801-buck4-overvolt"), + BD96801_IRQINFO(BD96801_PROT_UVP, "buck4-under-voltage", 500, + "bd96801-buck4-undervolt"), + BD96801_IRQINFO(BD96801_PROT_TEMP, "buck4-over-temp", 500, + "bd96801-buck4-thermal") +}; + +static const struct bd96801_irqinfo ldo5_irqinfo[] = { + BD96801_IRQINFO(BD96801_PROT_OCP, "ldo5-overcurr", 500, + "bd96801-ldo5-overcurr"), + BD96801_IRQINFO(BD96801_PROT_OVP, "ldo5-over-voltage", 500, + "bd96801-ldo5-overvolt"), + BD96801_IRQINFO(BD96801_PROT_UVP, "ldo5-under-voltage", 500, + "bd96801-ldo5-undervolt"), +}; + +static const struct bd96801_irqinfo ldo6_irqinfo[] = { + BD96801_IRQINFO(BD96801_PROT_OCP, "ldo6-overcurr", 500, + "bd96801-ldo6-overcurr"), + BD96801_IRQINFO(BD96801_PROT_OVP, "ldo6-over-voltage", 500, + "bd96801-ldo6-overvolt"), + BD96801_IRQINFO(BD96801_PROT_UVP, "ldo6-under-voltage", 500, + "bd96801-ldo6-undervolt"), +}; + +static const struct bd96801_irqinfo ldo7_irqinfo[] = { + BD96801_IRQINFO(BD96801_PROT_OCP, "ldo7-overcurr", 500, + "bd96801-ldo7-overcurr"), + BD96801_IRQINFO(BD96801_PROT_OVP, "ldo7-over-voltage", 500, + "bd96801-ldo7-overvolt"), + BD96801_IRQINFO(BD96801_PROT_UVP, "ldo7-under-voltage", 500, + "bd96801-ldo7-undervolt"), +}; + +struct bd96801_irq_desc { + struct bd96801_irqinfo *irqinfo; + int num_irqs; +}; + +struct bd96801_regulator_data { + struct regulator_desc desc; + const struct linear_range *init_ranges; + int num_ranges; + struct bd96801_irq_desc irq_desc; + int initial_voltage; + int ldo_vol_lvl; + int ldo_errs; +}; + +struct bd96801_pmic_data { + struct bd96801_regulator_data regulator_data[BD96801_NUM_REGULATORS]; + struct regmap *regmap; + int fatal_ind; +}; + +static int ldo_map_notif(int irq, struct regulator_irq_data *rid, + unsigned long *dev_mask) +{ + int i; + + for (i = 0; i < rid->num_states; i++) { + struct bd96801_regulator_data *rdata; + struct regulator_dev *rdev; + + rdev = rid->states[i].rdev; + rdata = container_of(rdev->desc, struct bd96801_regulator_data, + desc); + rid->states[i].notifs = regulator_err2notif(rdata->ldo_errs); + rid->states[i].errors = rdata->ldo_errs; + *dev_mask |= BIT(i); + } + return 0; +} + +static int bd96801_list_voltage_lr(struct regulator_dev *rdev, + unsigned int selector) +{ + int voltage; + struct bd96801_regulator_data *data; + + data = container_of(rdev->desc, struct bd96801_regulator_data, desc); + + /* + * The BD096801 has voltage setting in two registers. One giving the + * "initial voltage" (can be changed only when regulator is disabled. + * This driver caches the value and sets it only at startup. The other + * register is voltage tuning value which applies -150 mV ... +150 mV + * offset to the voltage. + * + * Note that the cached initial voltage stored in regulator data is + * 'scaled down' by the 150 mV so that all of our tuning values are + * >= 0. This is done because the linear_ranges uses unsigned values. + * + * As a result, we increase the tuning voltage which we get based on + * the selector by the stored initial_voltage. + */ + voltage = regulator_list_voltage_linear_range(rdev, selector); + if (voltage < 0) + return voltage; + + return voltage + data->initial_voltage; +} + + +static const struct regulator_ops bd96801_ldo_table_ops = { + .is_enabled = regulator_is_enabled_regmap, + .list_voltage = regulator_list_voltage_table, + .get_voltage_sel = regulator_get_voltage_sel_regmap, +}; + +static const struct regulator_ops bd96801_buck_ops = { + .is_enabled = regulator_is_enabled_regmap, + .list_voltage = bd96801_list_voltage_lr, + .set_voltage_sel = regulator_set_voltage_sel_regmap, + .get_voltage_sel = regulator_get_voltage_sel_regmap, + .set_voltage_time_sel = regulator_set_voltage_time_sel, + .set_ramp_delay = regulator_set_ramp_delay_regmap, +}; + +static const struct regulator_ops bd96801_ldo_ops = { + .is_enabled = regulator_is_enabled_regmap, + .list_voltage = regulator_list_voltage_linear_range, + .get_voltage_sel = regulator_get_voltage_sel_regmap, +}; + +static int buck_get_initial_voltage(struct regmap *regmap, struct device *dev, + struct bd96801_regulator_data *data) +{ + int ret = 0, sel, initial_uv; + int reg = BD96801_INT_VOUT_BASE_REG + data->desc.id; + + if (data->num_ranges) { + ret = regmap_read(regmap, reg, &sel); + sel &= BD96801_BUCK_INT_VOUT_MASK; + + ret = linear_range_get_value_array(data->init_ranges, + data->num_ranges, sel, + &initial_uv); + if (ret) + return ret; + + data->initial_voltage = initial_uv; + dev_dbg(dev, "Tune-scaled initial voltage %u\n", + data->initial_voltage); + } + + return 0; +} + +static int get_ldo_initial_voltage(struct regmap *regmap, + struct device *dev, + struct bd96801_regulator_data *data) +{ + int ret; + int cfgreg; + + ret = regmap_read(regmap, data->ldo_vol_lvl, &cfgreg); + if (ret) + return ret; + + switch (cfgreg & BD96801_LDO_MODE_MASK) { + case BD96801_LDO_MODE_DDR: + data->desc.volt_table = ldo_ddr_volt_table; + data->desc.n_voltages = ARRAY_SIZE(ldo_ddr_volt_table); + break; + case BD96801_LDO_MODE_SD: + data->desc.volt_table = ldo_sd_volt_table; + data->desc.n_voltages = ARRAY_SIZE(ldo_sd_volt_table); + break; + default: + dev_info(dev, "Leaving LDO to normal mode"); + return 0; + } + + /* SD or DDR mode => override default ops */ + data->desc.ops = &bd96801_ldo_table_ops, + data->desc.vsel_mask = 1; + data->desc.vsel_reg = data->ldo_vol_lvl; + + return 0; +} + +static int get_initial_voltage(struct device *dev, struct regmap *regmap, + struct bd96801_regulator_data *data) +{ + /* BUCK */ + if (data->desc.id <= BD96801_BUCK4) + return buck_get_initial_voltage(regmap, dev, data); + + /* LDO */ + return get_ldo_initial_voltage(regmap, dev, data); +} + +static int bd96801_walk_regulator_dt(struct device *dev, struct regmap *regmap, + struct bd96801_regulator_data *data, + int num) +{ + int i, ret; + struct device_node *np; + struct device_node *nproot = dev->parent->of_node; + + nproot = of_get_child_by_name(nproot, "regulators"); + if (!nproot) { + dev_err(dev, "failed to find regulators node\n"); + return -ENODEV; + } + for_each_child_of_node(nproot, np) + for (i = 0; i < num; i++) { + if (!of_node_name_eq(np, data[i].desc.of_match)) + continue; + /* + * If STBY configs are supported, we must pass node + * here to extract the initial voltages from the DT. + * Thus we do the initial voltage getting in this + * loop. + */ + ret = get_initial_voltage(dev, regmap, &data[i]); + if (ret) { + dev_err(dev, + "Initializing voltages for %s failed\n", + data[i].desc.name); + of_node_put(np); + of_node_put(nproot); + + return ret; + } + if (of_property_read_bool(np, "rohm,keep-on-stby")) { + ret = regmap_set_bits(regmap, + BD96801_ALWAYS_ON_REG, + 1 << data[i].desc.id); + if (ret) { + dev_err(dev, + "failed to set %s on-at-stby\n", + data[i].desc.name); + of_node_put(np); + of_node_put(nproot); + + return ret; + } + } + } + of_node_put(nproot); + + return 0; +} + +/* + * Template for regulator data. Probe will allocate dynamic / driver instance + * struct so we should be on a safe side even if there were multiple PMICs to + * control. Note that there is a plan to allow multiple PMICs to be used so + * systems can scale better. I am however still slightly unsure how the + * multi-PMIC case will be handled. I don't know if the processor will have I2C + * acces to all of the PMICs or only the first one. I'd guess there will be + * access provided to all PMICs for voltage scaling - but the errors will only + * be informed via the master PMIC. Eg, we should prepare to support multiple + * driver instances - either with or without the IRQs... Well, let's first + * just support the simple and clear single-PMIC setup and ponder the multi PMIC + * case later. What we can easly do for preparing is to not use static global + * data for regulators though. + */ +static const struct bd96801_pmic_data bd96801_data = { + .regulator_data = { + { + .desc = { + .name = "buck1", + .of_match = of_match_ptr("BUCK1"), + .regulators_node = of_match_ptr("regulators"), + .id = BD96801_BUCK1, + .ops = &bd96801_buck_ops, + .type = REGULATOR_VOLTAGE, + .linear_ranges = bd96801_tune_volts, + .n_linear_ranges = ARRAY_SIZE(bd96801_tune_volts), + .n_voltages = BD96801_BUCK_VOLTS, + .enable_reg = BD96801_REG_ENABLE, + .enable_mask = BD96801_BUCK1_EN_MASK, + .enable_is_inverted = true, + .vsel_reg = BD96801_BUCK1_VSEL_REG, + .vsel_mask = BD96801_BUCK_VSEL_MASK, + .ramp_reg = BD96801_BUCK1_VSEL_REG, + .ramp_mask = BD96801_MASK_RAMP_DELAY, + .ramp_delay_table = &buck_ramp_table[0], + .n_ramp_values = ARRAY_SIZE(buck_ramp_table), + .owner = THIS_MODULE, + }, + .init_ranges = bd96801_buck_init_volts, + .num_ranges = ARRAY_SIZE(bd96801_buck_init_volts), + .irq_desc = { + .irqinfo = (struct bd96801_irqinfo *)&buck1_irqinfo[0], + .num_irqs = ARRAY_SIZE(buck1_irqinfo), + }, + }, { + .desc = { + .name = "buck2", + .of_match = of_match_ptr("BUCK2"), + .regulators_node = of_match_ptr("regulators"), + .id = BD96801_BUCK2, + .ops = &bd96801_buck_ops, + .type = REGULATOR_VOLTAGE, + .linear_ranges = bd96801_tune_volts, + .n_linear_ranges = ARRAY_SIZE(bd96801_tune_volts), + .n_voltages = BD96801_BUCK_VOLTS, + .enable_reg = BD96801_REG_ENABLE, + .enable_mask = BD96801_BUCK2_EN_MASK, + .enable_is_inverted = true, + .vsel_reg = BD96801_BUCK2_VSEL_REG, + .vsel_mask = BD96801_BUCK_VSEL_MASK, + .ramp_reg = BD96801_BUCK2_VSEL_REG, + .ramp_mask = BD96801_MASK_RAMP_DELAY, + .ramp_delay_table = &buck_ramp_table[0], + .n_ramp_values = ARRAY_SIZE(buck_ramp_table), + .owner = THIS_MODULE, + }, + .irq_desc = { + .irqinfo = (struct bd96801_irqinfo *)&buck2_irqinfo[0], + .num_irqs = ARRAY_SIZE(buck2_irqinfo), + }, + .init_ranges = bd96801_buck_init_volts, + .num_ranges = ARRAY_SIZE(bd96801_buck_init_volts), + }, { + .desc = { + .name = "buck3", + .of_match = of_match_ptr("BUCK3"), + .regulators_node = of_match_ptr("regulators"), + .id = BD96801_BUCK3, + .ops = &bd96801_buck_ops, + .type = REGULATOR_VOLTAGE, + .linear_ranges = bd96801_tune_volts, + .n_linear_ranges = ARRAY_SIZE(bd96801_tune_volts), + .n_voltages = BD96801_BUCK_VOLTS, + .enable_reg = BD96801_REG_ENABLE, + .enable_mask = BD96801_BUCK3_EN_MASK, + .enable_is_inverted = true, + .vsel_reg = BD96801_BUCK3_VSEL_REG, + .vsel_mask = BD96801_BUCK_VSEL_MASK, + .ramp_reg = BD96801_BUCK3_VSEL_REG, + .ramp_mask = BD96801_MASK_RAMP_DELAY, + .ramp_delay_table = &buck_ramp_table[0], + .n_ramp_values = ARRAY_SIZE(buck_ramp_table), + .owner = THIS_MODULE, + }, + .irq_desc = { + .irqinfo = (struct bd96801_irqinfo *)&buck3_irqinfo[0], + .num_irqs = ARRAY_SIZE(buck3_irqinfo), + }, + .init_ranges = bd96801_buck_init_volts, + .num_ranges = ARRAY_SIZE(bd96801_buck_init_volts), + }, { + .desc = { + .name = "buck4", + .of_match = of_match_ptr("BUCK4"), + .regulators_node = of_match_ptr("regulators"), + .id = BD96801_BUCK4, + .ops = &bd96801_buck_ops, + .type = REGULATOR_VOLTAGE, + .linear_ranges = bd96801_tune_volts, + .n_linear_ranges = ARRAY_SIZE(bd96801_tune_volts), + .n_voltages = BD96801_BUCK_VOLTS, + .enable_reg = BD96801_REG_ENABLE, + .enable_mask = BD96801_BUCK4_EN_MASK, + .enable_is_inverted = true, + .vsel_reg = BD96801_BUCK4_VSEL_REG, + .vsel_mask = BD96801_BUCK_VSEL_MASK, + .ramp_reg = BD96801_BUCK4_VSEL_REG, + .ramp_mask = BD96801_MASK_RAMP_DELAY, + .ramp_delay_table = &buck_ramp_table[0], + .n_ramp_values = ARRAY_SIZE(buck_ramp_table), + .owner = THIS_MODULE, + }, + .irq_desc = { + .irqinfo = (struct bd96801_irqinfo *)&buck4_irqinfo[0], + .num_irqs = ARRAY_SIZE(buck4_irqinfo), + }, + .init_ranges = bd96801_buck_init_volts, + .num_ranges = ARRAY_SIZE(bd96801_buck_init_volts), + }, { + .desc = { + .name = "ldo5", + .of_match = of_match_ptr("LDO5"), + .regulators_node = of_match_ptr("regulators"), + .id = BD96801_LDO5, + .ops = &bd96801_ldo_ops, + .type = REGULATOR_VOLTAGE, + .linear_ranges = bd96801_ldo_int_volts, + .n_linear_ranges = ARRAY_SIZE(bd96801_ldo_int_volts), + .n_voltages = BD96801_LDO_VOLTS, + .enable_reg = BD96801_REG_ENABLE, + .enable_mask = BD96801_LDO5_EN_MASK, + .enable_is_inverted = true, + .vsel_reg = BD96801_LDO5_VSEL_REG, + .vsel_mask = BD96801_LDO_VSEL_MASK, + .owner = THIS_MODULE, + }, + .irq_desc = { + .irqinfo = (struct bd96801_irqinfo *)&ldo5_irqinfo[0], + .num_irqs = ARRAY_SIZE(ldo5_irqinfo), + }, + .ldo_vol_lvl = BD96801_LDO5_VOL_LVL_REG, + }, { + .desc = { + .name = "ldo6", + .of_match = of_match_ptr("LDO6"), + .regulators_node = of_match_ptr("regulators"), + .id = BD96801_LDO6, + .ops = &bd96801_ldo_ops, + .type = REGULATOR_VOLTAGE, + .linear_ranges = bd96801_ldo_int_volts, + .n_linear_ranges = ARRAY_SIZE(bd96801_ldo_int_volts), + .n_voltages = BD96801_LDO_VOLTS, + .enable_reg = BD96801_REG_ENABLE, + .enable_mask = BD96801_LDO6_EN_MASK, + .enable_is_inverted = true, + .vsel_reg = BD96801_LDO6_VSEL_REG, + .vsel_mask = BD96801_LDO_VSEL_MASK, + .owner = THIS_MODULE, + }, + .irq_desc = { + .irqinfo = (struct bd96801_irqinfo *)&ldo6_irqinfo[0], + .num_irqs = ARRAY_SIZE(ldo6_irqinfo), + }, + .ldo_vol_lvl = BD96801_LDO6_VOL_LVL_REG, + }, { + .desc = { + .name = "ldo7", + .of_match = of_match_ptr("LDO7"), + .regulators_node = of_match_ptr("regulators"), + .id = BD96801_LDO7, + .ops = &bd96801_ldo_ops, + .type = REGULATOR_VOLTAGE, + .linear_ranges = bd96801_ldo_int_volts, + .n_linear_ranges = ARRAY_SIZE(bd96801_ldo_int_volts), + .n_voltages = BD96801_LDO_VOLTS, + .enable_reg = BD96801_REG_ENABLE, + .enable_mask = BD96801_LDO7_EN_MASK, + .enable_is_inverted = true, + .vsel_reg = BD96801_LDO7_VSEL_REG, + .vsel_mask = BD96801_LDO_VSEL_MASK, + .owner = THIS_MODULE, + }, + .irq_desc = { + .irqinfo = (struct bd96801_irqinfo *)&ldo7_irqinfo[0], + .num_irqs = ARRAY_SIZE(ldo7_irqinfo), + }, + .ldo_vol_lvl = BD96801_LDO7_VOL_LVL_REG, + }, + }, +}; + +static int initialize_pmic_data(struct device *dev, + struct bd96801_pmic_data *pdata) +{ + int r, i; + + /* + * Allocate and initialize IRQ data for all of the regulators. We + * wish to modify IRQ information independently for each driver + * instance. + */ + for (r = 0; r < BD96801_NUM_REGULATORS; r++) { + const struct bd96801_irqinfo *template; + struct bd96801_irqinfo *new; + int num_infos; + + template = pdata->regulator_data[r].irq_desc.irqinfo; + num_infos = pdata->regulator_data[r].irq_desc.num_irqs; + + new = devm_kcalloc(dev, num_infos, sizeof(*new), GFP_KERNEL); + if (!new) + return -ENOMEM; + + pdata->regulator_data[r].irq_desc.irqinfo = new; + + for (i = 0; i < num_infos; i++) + new[i] = template[i]; + } + + return 0; +} + +static int bd96801_probe(struct platform_device *pdev) +{ + struct device *parent; + int i, ret, irq; + void *retp; + struct regulator_config config = {}; + struct bd96801_regulator_data *rdesc; + struct bd96801_pmic_data *pdata; + struct regulator_dev *ldo_errs_rdev_arr[BD96801_NUM_LDOS]; + int ldo_errs_arr[BD96801_NUM_LDOS]; + int temp_notif_ldos = 0; + + parent = pdev->dev.parent; + + pdata = devm_kmemdup(&pdev->dev, &bd96801_data, sizeof(bd96801_data), + GFP_KERNEL); + if (!pdata) + return -ENOMEM; + + if (initialize_pmic_data(&pdev->dev, pdata)) + return -ENOMEM; + + pdata->regmap = dev_get_regmap(parent, NULL); + if (!pdata->regmap) { + dev_err(&pdev->dev, "No register map found\n"); + return -ENODEV; + } + + rdesc = &pdata->regulator_data[0]; + + config.driver_data = pdata; + config.regmap = pdata->regmap; + config.dev = parent; + + ret = bd96801_walk_regulator_dt(&pdev->dev, pdata->regmap, rdesc, + BD96801_NUM_REGULATORS); + if (ret) + return ret; + + for (i = 0; i < ARRAY_SIZE(pdata->regulator_data); i++) { + struct regulator_dev *rdev; + struct regulator_dev *rdev_arr[1]; + struct bd96801_irq_desc *idesc = &rdesc[i].irq_desc; + int j; + + rdev = devm_regulator_register(&pdev->dev, + &rdesc[i].desc, &config); + if (IS_ERR(rdev)) { + dev_err(&pdev->dev, + "failed to register %s regulator\n", + rdesc[i].desc.name); + return PTR_ERR(rdev); + } + /* + * LDOs don't have own temperature monitoring. If temperature + * notification was requested for this LDO from DT then we will + * add the regulator to be notified if central IC temperature + * exceeds threshold. + */ + if (rdesc[i].ldo_errs) { + ldo_errs_rdev_arr[temp_notif_ldos] = rdev; + ldo_errs_arr[temp_notif_ldos] = rdesc[i].ldo_errs; + temp_notif_ldos++; + } + if (!idesc) + continue; + /* + * TODO: Can we split adding the INTB notifiers in own + * function ? + */ + /* Register INTB handlers for configured protections */ + for (j = 0; j < idesc->num_irqs; j++) { + struct bd96801_irqinfo *iinfo; + int err = 0; + int err_flags[] = { + [BD96801_PROT_OVP] = REGULATOR_ERROR_REGULATION_OUT, + [BD96801_PROT_UVP] = REGULATOR_ERROR_UNDER_VOLTAGE, + [BD96801_PROT_OCP] = REGULATOR_ERROR_OVER_CURRENT, + [BD96801_PROT_TEMP] = REGULATOR_ERROR_OVER_TEMP, + + }; + int wrn_flags[] = { + [BD96801_PROT_OVP] = REGULATOR_ERROR_OVER_VOLTAGE_WARN, + [BD96801_PROT_UVP] = REGULATOR_ERROR_UNDER_VOLTAGE_WARN, + [BD96801_PROT_OCP] = REGULATOR_ERROR_OVER_CURRENT_WARN, + [BD96801_PROT_TEMP] = REGULATOR_ERROR_OVER_TEMP_WARN, + }; + + iinfo = &idesc->irqinfo[j]; + /* + * Don't install IRQ handler if both error and warning + * notifications are explicitly disabled + */ + if (!iinfo->err_cfg && !iinfo->wrn_cfg) + continue; + + if (WARN_ON(iinfo->type >= BD96801_NUM_PROT)) + return -EINVAL; + + if (iinfo->err_cfg) + err = err_flags[iinfo->type]; + else if (iinfo->wrn_cfg) + err = wrn_flags[iinfo->type]; + + iinfo->irq_desc.data = pdata; + irq = platform_get_irq_byname(pdev, iinfo->irq_name); + if (irq < 0) + return irq; + /* Find notifications for this IRQ (WARN/ERR) */ + + rdev_arr[0] = rdev; + retp = devm_regulator_irq_helper(&pdev->dev, + &iinfo->irq_desc, irq, + 0, err, NULL, rdev_arr, + 1); + if (IS_ERR(retp)) + return PTR_ERR(retp); + } + } + if (temp_notif_ldos) { + int irq; + struct regulator_irq_desc tw_desc = { + .name = "bd96801-core-thermal", + .irq_off_ms = 500, + .map_event = ldo_map_notif, + }; + + irq = platform_get_irq_byname(pdev, "bd96801-core-thermal"); + if (irq < 0) + return irq; + + retp = devm_regulator_irq_helper(&pdev->dev, &tw_desc, irq, 0, + 0, &ldo_errs_arr[0], + &ldo_errs_rdev_arr[0], + temp_notif_ldos); + if (IS_ERR(retp)) + return PTR_ERR(retp); + } + + return 0; +} + +static const struct platform_device_id bd96801_pmic_id[] = { + { "bd96801-pmic", }, + { } +}; +MODULE_DEVICE_TABLE(platform, bd96801_pmic_id); + +static struct platform_driver bd96801_regulator = { + .driver = { + .name = "bd96801-pmic" + }, + .probe = bd96801_probe, + .id_table = bd96801_pmic_id, +}; + +module_platform_driver(bd96801_regulator); + +MODULE_AUTHOR("Matti Vaittinen "); +MODULE_DESCRIPTION("BD96801 voltage regulator driver"); +MODULE_LICENSE("GPL"); From patchwork Tue Apr 30 12:01:37 2024 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Matti Vaittinen X-Patchwork-Id: 13648846 Received: from mail-lf1-f44.google.com (mail-lf1-f44.google.com [209.85.167.44]) (using TLSv1.2 with cipher ECDHE-RSA-AES128-GCM-SHA256 (128/128 bits)) (No client certificate requested) by smtp.subspace.kernel.org (Postfix) with ESMTPS id 05C5413D26D; Tue, 30 Apr 2024 12:01:45 +0000 (UTC) Authentication-Results: smtp.subspace.kernel.org; arc=none smtp.client-ip=209.85.167.44 ARC-Seal: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1714478508; cv=none; b=GluKep3xVqRdUqN5Dytk0DnCIZZXw3zzlntsevnINOe1PGP9dqZuac2DoFieOubSeafCFPtQXluS3IloWUpwo/PWMO1MHqBWBjIL/uf3bPSDEULCf9kI67qifwkvi3HuYLxQxXTY0CRJDF/9w3mDIY+XuMkxkbgakErN494GAKQ= ARC-Message-Signature: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1714478508; c=relaxed/simple; bh=wQGekXScusyJJEoc162KtW8KqxOD0j1YRUh4HslumU8=; h=Date:From:To:Cc:Subject:Message-ID:References:MIME-Version: Content-Type:Content-Disposition:In-Reply-To; b=AIyNk1d7JfwJb56BwIjuEQrTmRUTRA79S53VMTfWSXsFtwuhSitfKEf6YmhqJ6oMnwQU0Gm0a+D6uxyzP7flSPznMd4t9Zwdg8ahrLZpM8EWfcf+AQ88a3fT/SwT60NSztW2i+hDK7Bw/57B1/IwR7vV3pvhYzgp4CY69TOgYLc= ARC-Authentication-Results: i=1; smtp.subspace.kernel.org; dmarc=pass (p=none dis=none) header.from=gmail.com; spf=pass smtp.mailfrom=gmail.com; dkim=pass (2048-bit key) header.d=gmail.com header.i=@gmail.com header.b=Osuft6+Y; arc=none smtp.client-ip=209.85.167.44 Authentication-Results: smtp.subspace.kernel.org; dmarc=pass (p=none dis=none) header.from=gmail.com Authentication-Results: smtp.subspace.kernel.org; spf=pass smtp.mailfrom=gmail.com Authentication-Results: smtp.subspace.kernel.org; dkim=pass (2048-bit key) header.d=gmail.com header.i=@gmail.com header.b="Osuft6+Y" Received: by mail-lf1-f44.google.com with SMTP id 2adb3069b0e04-5171a529224so7095148e87.0; Tue, 30 Apr 2024 05:01:45 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=20230601; t=1714478504; x=1715083304; darn=vger.kernel.org; h=in-reply-to:content-disposition:mime-version:references:message-id :subject:cc:to:from:date:from:to:cc:subject:date:message-id:reply-to; bh=QnarjhVmXyTjaB4IeH3fm1CZtRk0J8KRD4dmXhLvoak=; b=Osuft6+Yob/CXmpSHp5xVf3rwR6EDJPMQhi38GnNo6BiTCmQ6XExLuglvqjCp0RN81 bP5wDSFdHpobP260DI7TBuUNpYZvuaorAjj+vXCwLpPYm5nWwrLboa5zptiy4ltMN0UT G3TMwrMPNyLNWFSWcbRuDwfYMKJ2a4Ouk3pEEf4rRJ0M3h8PwBglgQuvUaXB1UZa2RRV z0EncvTLBPj8XfK4eON5EQCOKu6xAwPvt4+eGZ4IPmMQPvAZCF3oETZFADwPSic+bm3c z0CG6dbKQTOJwwZihlfCZQ3txScG9nkWEd29xmCLslxX7vqM3o6yQjK0ojHNDkcMHbvE rd/A== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20230601; t=1714478504; x=1715083304; h=in-reply-to:content-disposition:mime-version:references:message-id :subject:cc:to:from:date:x-gm-message-state:from:to:cc:subject:date :message-id:reply-to; bh=QnarjhVmXyTjaB4IeH3fm1CZtRk0J8KRD4dmXhLvoak=; b=Ihj0d0VFEh5XuzfiJy1nOCfQbJ1QMfsbg3EdPR/HEcTlMWnMJevKFtNIGV8frxF7lm iJljQrMLHnqUZZhtSK6iBvU6YPo9TsxigLYMb0ezpUpYpLHNzM17dPPGucR2YLgwKDjs gaIJKlWMrJ4E+MLhUwIHz5Sj8w6k0zn3+VAg6fKiRBJ2R12HTVDdt5Qt9HRVwLwpYhLV //46KEfmhR1yMPVpVqXSvICNlBYxiWGM+jIYDzPx6J+EJyo0NtlmcaIYKaSw7hai1U2i 6N0pYJkk+PhtagoyzdDEE9cOpimJKTNitj+xUQUMkKSLZWk+nG0D/H9OShc1ZOiUuAu6 A1pA== X-Forwarded-Encrypted: i=1; AJvYcCUV7YEuALJdu93P3EYzduKnSlrbaKkTegYHP02IYQCEEGB6zlBIiR5QwEoylJefXewW65ZFltyG2mgqqFexLFk7b+QfsfthJ/jBXm6YvmmXWtjPwnlY7QuO6AKib9bf7f9KLePFC6uGDD6L0VqklnASPv/TRAtvFISFk6t1i5jETwNPelDaE+ZZ X-Gm-Message-State: AOJu0YwjEMQuzscl9bBuESZ+pOLVd2biO6BnrtJiri+NzXBNYmz3MbQq TxXHAAfgBtLusoctrOGv7XZgCpZxntlO58XaDqVZK0ZLCD8D+YAO X-Google-Smtp-Source: AGHT+IE7RyGky1iY+1EIijSYgbMb9MT4nzOVNOTiLra8dhGbAx4DKJlU4qk5zqURKXJd5/VFBiljUg== X-Received: by 2002:a05:6512:3109:b0:518:a66e:aad2 with SMTP id n9-20020a056512310900b00518a66eaad2mr1911800lfb.63.1714478503682; Tue, 30 Apr 2024 05:01:43 -0700 (PDT) Received: from fedora ([213.255.186.46]) by smtp.gmail.com with ESMTPSA id c11-20020a056512074b00b005158558022bsm4475800lfs.288.2024.04.30.05.01.41 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Tue, 30 Apr 2024 05:01:41 -0700 (PDT) Date: Tue, 30 Apr 2024 15:01:37 +0300 From: Matti Vaittinen To: Matti Vaittinen , Matti Vaittinen Cc: Lee Jones , Rob Herring , Krzysztof Kozlowski , Conor Dooley , Liam Girdwood , Mark Brown , Matti Vaittinen , Wim Van Sebroeck , Guenter Roeck , devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-watchdog@vger.kernel.org Subject: [PATCH v1 5/6] watchdog: ROHM BD96801 PMIC WDG driver Message-ID: References: Precedence: bulk X-Mailing-List: linux-watchdog@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 Content-Disposition: inline In-Reply-To: Introduce driver for WDG block on ROHM BD96801 scalable PMIC. This driver only supports watchdog with I2C feeding and delayed response detection. Whether the watchdog toggles PRSTB pin or just causes an interrupt can be configured via device-tree. The BD96801 PMIC HW supports also window watchdog (too early feeding detection) and Q&A mode. These are not supported by this driver. Signed-off-by: Matti Vaittinen --- Revision history: RFCv2 => v1: - Fix watchdog time-outs to match DS4 - Fix target timeout overflow - Improve dbg prints RFCv1 => RFCv2: - remove always running - add IRQ handling - call emergency_restart() - drop MODULE_ALIAS and add MODULE_DEVICE_TABLE --- drivers/watchdog/Kconfig | 13 ++ drivers/watchdog/Makefile | 1 + drivers/watchdog/bd96801_wdt.c | 400 +++++++++++++++++++++++++++++++++ 3 files changed, 414 insertions(+) create mode 100644 drivers/watchdog/bd96801_wdt.c diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig index 6bee137cfbe0..d97e735e1faa 100644 --- a/drivers/watchdog/Kconfig +++ b/drivers/watchdog/Kconfig @@ -181,6 +181,19 @@ config BD957XMUF_WATCHDOG watchdog. Alternatively say M to compile the driver as a module, which will be called bd9576_wdt. +config BD96801_WATCHDOG + tristate "ROHM BD96801 PMIC Watchdog" + depends on MFD_ROHM_BD96801 + select WATCHDOG_CORE + help + Support for the watchdog in the ROHM BD96801 PMIC. Watchdog can be + configured to only generate IRQ or to trigger system reset via reset + pin. + + Say Y here to include support for the ROHM BD96801 watchdog. + Alternatively say M to compile the driver as a module, + which will be called bd96801_wdt. + config CROS_EC_WATCHDOG tristate "ChromeOS EC-based watchdog" select WATCHDOG_CORE diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile index 3710c218f05e..31bc94436c81 100644 --- a/drivers/watchdog/Makefile +++ b/drivers/watchdog/Makefile @@ -217,6 +217,7 @@ obj-$(CONFIG_XEN_WDT) += xen_wdt.o # Architecture Independent obj-$(CONFIG_BD957XMUF_WATCHDOG) += bd9576_wdt.o +obj-$(CONFIG_BD96801_WATCHDOG) += bd96801_wdt.o obj-$(CONFIG_CROS_EC_WATCHDOG) += cros_ec_wdt.o obj-$(CONFIG_DA9052_WATCHDOG) += da9052_wdt.o obj-$(CONFIG_DA9055_WATCHDOG) += da9055_wdt.o diff --git a/drivers/watchdog/bd96801_wdt.c b/drivers/watchdog/bd96801_wdt.c new file mode 100644 index 000000000000..6069f1d75356 --- /dev/null +++ b/drivers/watchdog/bd96801_wdt.c @@ -0,0 +1,400 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (C) 2024 ROHM Semiconductors + * + * ROHM BD96801 watchdog driver + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +static bool nowayout; +module_param(nowayout, bool, 0); +MODULE_PARM_DESC(nowayout, + "Watchdog cannot be stopped once started (default=\"false\")"); + +#define BD96801_WD_TMO_SHORT_MASK 0x70 +#define BD96801_WD_RATIO_MASK 0x3 +#define BD96801_WD_TYPE_MASK 0x4 +#define BD96801_WD_TYPE_SLOW 0x4 +#define BD96801_WD_TYPE_WIN 0x0 + +#define BD96801_WD_EN_MASK 0x3 +#define BD96801_WD_IF_EN 0x1 +#define BD96801_WD_QA_EN 0x2 +#define BD96801_WD_DISABLE 0x0 + +#define BD96801_WD_ASSERT_MASK 0x8 +#define BD96801_WD_ASSERT_RST 0x8 +#define BD96801_WD_ASSERT_IRQ 0x0 + +#define BD96801_WD_FEED_MASK 0x1 +#define BD96801_WD_FEED 0x1 + +/* units in uS */ +#define FASTNG_MIN 11 + +#define BD96801_WDT_DEFAULT_MARGIN_MS 1843 +/* Unit is seconds */ +#define DEFAULT_TIMEOUT 30 + +/* + * BD96801 WDG supports window mode so the TMO consists of SHORT and LONG + * timeout values. SHORT time is meaningfull only in window mode where feeding + * period shorter than SHORT would be an error. LONG time is used to detect if + * feeding is not occurring within given time limit (SoC SW hangs). The LONG + * timeout time is a multiple of (2, 4, 8 0r 16 times) the SHORT timeout. + */ + +struct wdtbd96801 { + struct device *dev; + struct regmap *regmap; + struct watchdog_device wdt; +}; + +static int bd96801_wdt_ping(struct watchdog_device *wdt) +{ + struct wdtbd96801 *w = watchdog_get_drvdata(wdt); + + return regmap_update_bits(w->regmap, BD96801_REG_WD_FEED, + BD96801_WD_FEED_MASK, BD96801_WD_FEED); +} + +static int bd96801_wdt_start(struct watchdog_device *wdt) +{ + struct wdtbd96801 *w = watchdog_get_drvdata(wdt); + + return regmap_update_bits(w->regmap, BD96801_REG_WD_CONF, + BD96801_WD_EN_MASK, BD96801_WD_IF_EN); +} + +static int bd96801_wdt_stop(struct watchdog_device *wdt) +{ + struct wdtbd96801 *w = watchdog_get_drvdata(wdt); + + return regmap_update_bits(w->regmap, BD96801_REG_WD_CONF, + BD96801_WD_EN_MASK, BD96801_WD_DISABLE); +} + +static const struct watchdog_info bd96801_wdt_info = { + .options = WDIOF_MAGICCLOSE | WDIOF_KEEPALIVEPING | + WDIOF_SETTIMEOUT, + .identity = "BD96801 Watchdog", +}; + +static const struct watchdog_ops bd96801_wdt_ops = { + .start = bd96801_wdt_start, + .stop = bd96801_wdt_stop, + .ping = bd96801_wdt_ping, +}; + +static int find_closest_fast(unsigned int target, int *sel, unsigned int *val) +{ + unsigned int window = FASTNG_MIN; + int i; + + for (i = 0; i < 8 && window < target; i++) + window <<= 1; + + *val = window; + *sel = i; + + if (i == 8) + return -EINVAL; + + return 0; +} + +static int find_closest_slow_by_fast(unsigned int fast_val, unsigned int *target, int *slowsel) +{ + static const int multipliers[] = {2, 4, 8, 16}; + int sel; + + for (sel = 0; sel < ARRAY_SIZE(multipliers) && + multipliers[sel] * fast_val < *target; sel++) + ; + + if (sel == ARRAY_SIZE(multipliers)) + return -EINVAL; + + *slowsel = sel; + *target = multipliers[sel] * fast_val; + + return 0; +} + +static int find_closest_slow(unsigned int *target, int *slow_sel, int *fast_sel) +{ + static const int multipliers[] = {2, 4, 8, 16}; + unsigned int window = FASTNG_MIN; + unsigned int val = 0; + int i, j; + + for (i = 0; i < 8; i++) { + for (j = 0; j < ARRAY_SIZE(multipliers); j++) { + unsigned int slow; + + slow = window * multipliers[j]; + if (slow >= *target && (!val || slow < val)) { + val = slow; + *fast_sel = i; + *slow_sel = j; + } + } + window <<= 1; + } + if (!val) + return -EINVAL; + + *target = val; + + return 0; +} + +static int bd96801_set_wdt_mode(struct wdtbd96801 *w, unsigned int hw_margin, + unsigned int hw_margin_min) +{ + int fastng, slowng, type, ret, reg, mask; + struct device *dev = w->dev; + + /* + * Convert to 100uS to guarantee reasonable timeouts fit in + * 32bit maintaining also a decent accuracy. + */ + hw_margin *= 10; + hw_margin_min *= 10; + + if (hw_margin_min) { + unsigned int min; + + type = BD96801_WD_TYPE_WIN; + dev_dbg(dev, "Setting type WINDOW 0x%x\n", type); + ret = find_closest_fast(hw_margin_min, &fastng, &min); + if (ret) { + dev_err(dev, "bad WDT window for fast timeout\n"); + return ret; + } + + ret = find_closest_slow_by_fast(min, &hw_margin, &slowng); + if (ret) { + dev_err(dev, "bad WDT window\n"); + return ret; + } + w->wdt.min_hw_heartbeat_ms = min / 10; + } else { + type = BD96801_WD_TYPE_SLOW; + dev_dbg(dev, "Setting type SLOW 0x%x\n", type); + ret = find_closest_slow(&hw_margin, &slowng, &fastng); + if (ret) { + dev_err(dev, "bad WDT window\n"); + return ret; + } + } + + w->wdt.max_hw_heartbeat_ms = hw_margin / 10; + + fastng <<= ffs(BD96801_WD_TMO_SHORT_MASK) - 1; + + reg = slowng | fastng; + mask = BD96801_WD_RATIO_MASK | BD96801_WD_TMO_SHORT_MASK; + ret = regmap_update_bits(w->regmap, BD96801_REG_WD_TMO, + mask, reg); + if (ret) + return ret; + + ret = regmap_update_bits(w->regmap, BD96801_REG_WD_CONF, + BD96801_WD_TYPE_MASK, type); + + return ret; +} + +static int bd96801_set_heartbeat_from_hw(struct wdtbd96801 *w, + unsigned int conf_reg) +{ + int ret; + unsigned int val, sel, fast; + + /* + * The BD96801 supports a somewhat peculiar QA-mode, which we do not + * support in this driver. If the QA-mode is enabled then we just + * warn and bail-out. + */ + if ((conf_reg & BD96801_WD_EN_MASK) != BD96801_WD_IF_EN) { + dev_warn(w->dev, "watchdog set to Q&A mode - exiting\n"); + return -EINVAL; + } + + ret = regmap_read(w->regmap, BD96801_REG_WD_TMO, &val); + if (ret) + return ret; + + sel = val & BD96801_WD_TMO_SHORT_MASK; + sel >>= ffs(BD96801_WD_TMO_SHORT_MASK) - 1; + fast = FASTNG_MIN << sel; + + sel = (val & BD96801_WD_RATIO_MASK) + 1; + w->wdt.max_hw_heartbeat_ms = (fast << sel) / USEC_PER_MSEC; + + if ((conf_reg & BD96801_WD_TYPE_MASK) == BD96801_WD_TYPE_WIN) + w->wdt.min_hw_heartbeat_ms = fast / USEC_PER_MSEC; + + return 0; +} + +static int init_wdg_hw(struct wdtbd96801 *w) +{ + u32 hw_margin[2]; + int count, ret; + u32 hw_margin_max = BD96801_WDT_DEFAULT_MARGIN_MS, hw_margin_min = 0; + + count = device_property_count_u32(w->dev->parent, "rohm,hw-timeout-ms"); + if (count < 0 && count != -EINVAL) + return count; + + if (count > 0) { + if (count > ARRAY_SIZE(hw_margin)) + return -EINVAL; + + ret = device_property_read_u32_array(w->dev->parent, + "rohm,hw-timeout-ms", + &hw_margin[0], count); + if (ret < 0) + return ret; + + if (count == 1) + hw_margin_max = hw_margin[0]; + + if (count == 2) { + if (hw_margin[1] > hw_margin[0]) { + hw_margin_max = hw_margin[1]; + hw_margin_min = hw_margin[0]; + } else { + hw_margin_max = hw_margin[0]; + hw_margin_min = hw_margin[1]; + } + } + } + + ret = bd96801_set_wdt_mode(w, hw_margin_max, hw_margin_min); + if (ret) + return ret; + + ret = device_property_match_string(w->dev->parent, "rohm,wdg-action", + "prstb"); + if (ret >= 0) { + ret = regmap_update_bits(w->regmap, BD96801_REG_WD_CONF, + BD96801_WD_ASSERT_MASK, + BD96801_WD_ASSERT_RST); + return ret; + } + + ret = device_property_match_string(w->dev->parent, "rohm,wdg-action", + "intb-only"); + if (ret >= 0) { + ret = regmap_update_bits(w->regmap, BD96801_REG_WD_CONF, + BD96801_WD_ASSERT_MASK, + BD96801_WD_ASSERT_IRQ); + return ret; + } + + return 0; +} + +extern void emergency_restart(void); +static irqreturn_t bd96801_irq_hnd(int irq, void *data) +{ + emergency_restart(); + + return IRQ_NONE; +} + +static int bd96801_wdt_probe(struct platform_device *pdev) +{ + struct wdtbd96801 *w; + int ret, irq; + unsigned int val; + + w = devm_kzalloc(&pdev->dev, sizeof(*w), GFP_KERNEL); + if (!w) + return -ENOMEM; + + w->regmap = dev_get_regmap(pdev->dev.parent, NULL); + w->dev = &pdev->dev; + + w->wdt.info = &bd96801_wdt_info; + w->wdt.ops = &bd96801_wdt_ops; + w->wdt.parent = pdev->dev.parent; + w->wdt.timeout = DEFAULT_TIMEOUT; + watchdog_set_drvdata(&w->wdt, w); + + ret = regmap_read(w->regmap, BD96801_REG_WD_CONF, &val); + if (ret) + return dev_err_probe(&pdev->dev, ret, + "Failed to get the watchdog state\n"); + + /* + * If the WDG is already enabled we assume it is configured by boot. + * In this case we just update the hw-timeout based on values set to + * the timeout / mode registers and leave the hardware configs + * untouched. + */ + if ((val & BD96801_WD_EN_MASK) != BD96801_WD_DISABLE) { + dev_dbg(&pdev->dev, "watchdog was running during probe\n"); + ret = bd96801_set_heartbeat_from_hw(w, val); + if (ret) + return ret; + + set_bit(WDOG_HW_RUNNING, &w->wdt.status); + } else { + /* If WDG is not running so we will initializate it */ + ret = init_wdg_hw(w); + if (ret) + return ret; + } + + dev_dbg(w->dev, "heartbeat set to %u - %u\n", + w->wdt.min_hw_heartbeat_ms, w->wdt.max_hw_heartbeat_ms); + + watchdog_init_timeout(&w->wdt, 0, pdev->dev.parent); + watchdog_set_nowayout(&w->wdt, nowayout); + watchdog_stop_on_reboot(&w->wdt); + + irq = platform_get_irq_byname(pdev, "bd96801-wdg"); + if (irq > 0) { + ret = devm_request_threaded_irq(&pdev->dev, irq, NULL, + bd96801_irq_hnd, + IRQF_ONESHOT, "bd96801-wdg", + NULL); + if (ret) + return dev_err_probe(&pdev->dev, ret, + "Failed to register IRQ\n"); + } + + return devm_watchdog_register_device(&pdev->dev, &w->wdt); +} + +static const struct platform_device_id bd96801_wdt_id[] = { + { "bd96801-wdt", }, + { } +}; +MODULE_DEVICE_TABLE(platform, bd96801_wdt_id); + +static struct platform_driver bd96801_wdt = { + .driver = { + .name = "bd96801-wdt" + }, + .probe = bd96801_wdt_probe, + .id_table = bd96801_wdt_id, +}; +module_platform_driver(bd96801_wdt); + +MODULE_AUTHOR("Matti Vaittinen "); +MODULE_DESCRIPTION("BD96801 watchdog driver"); +MODULE_LICENSE("GPL"); From patchwork Tue Apr 30 12:02:10 2024 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Matti Vaittinen X-Patchwork-Id: 13648847 Received: from mail-lf1-f47.google.com (mail-lf1-f47.google.com [209.85.167.47]) (using TLSv1.2 with cipher ECDHE-RSA-AES128-GCM-SHA256 (128/128 bits)) (No client certificate requested) by smtp.subspace.kernel.org (Postfix) with ESMTPS id 6C82D13D267; Tue, 30 Apr 2024 12:02:17 +0000 (UTC) Authentication-Results: smtp.subspace.kernel.org; arc=none smtp.client-ip=209.85.167.47 ARC-Seal: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1714478538; cv=none; b=SyQjB4TcRX/WAMfW080fdcOgJ6zhO5S+ETSzzOZeEeq4ptWPyPH076ytBC+jv1VQ2LK9FL3dBJz0WGG0qA3SXaT0keTlDrczwe3sqVqAgJNIuJiRLyA9woBc23cRqFgJV/2kma7thjzb3sSpBrcAZUZ+EGf80dxhDRzXN0nl3vE= ARC-Message-Signature: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1714478538; c=relaxed/simple; bh=79UNfhj2pKS3elAdRYb+cWvVDbeO+ck0Bf+XlOj7T44=; h=Date:From:To:Cc:Subject:Message-ID:References:MIME-Version: Content-Type:Content-Disposition:In-Reply-To; b=c3JnXU5ynd86evalACIAKB0QPLb3rK5XhP5eyq28Prav1jFyQDNEUcsli18RnzN7ARuv6aDwiPiBUZnmzyglYPBFWmiV9OhqX45QeNsP4GedQOwpx+RLWBPSZQO2bKhPs0hCDOVk9MhbpZGkTqfNkAPDDpEHpEZXo01YccwN9g0= ARC-Authentication-Results: i=1; smtp.subspace.kernel.org; dmarc=pass (p=none dis=none) header.from=gmail.com; spf=pass smtp.mailfrom=gmail.com; dkim=pass (2048-bit key) header.d=gmail.com header.i=@gmail.com header.b=PP/eEPCw; arc=none smtp.client-ip=209.85.167.47 Authentication-Results: smtp.subspace.kernel.org; dmarc=pass (p=none dis=none) header.from=gmail.com Authentication-Results: smtp.subspace.kernel.org; spf=pass smtp.mailfrom=gmail.com Authentication-Results: smtp.subspace.kernel.org; dkim=pass (2048-bit key) header.d=gmail.com header.i=@gmail.com header.b="PP/eEPCw" Received: by mail-lf1-f47.google.com with SMTP id 2adb3069b0e04-51ca95db667so5240485e87.0; Tue, 30 Apr 2024 05:02:17 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=20230601; t=1714478536; x=1715083336; darn=vger.kernel.org; h=in-reply-to:content-disposition:mime-version:references:message-id :subject:cc:to:from:date:from:to:cc:subject:date:message-id:reply-to; bh=Zox/qmaglXo0HD/YN8voWJNp1dns8XrdzThPKzYbfYs=; b=PP/eEPCwefkzMAxI3m34BUPZBGkPJX6Esd6qK0EyholXhUf0DGH0zdSNDrRi6hajB6 NcO8O9wPlhO9O27BtgHItwFrOAn1ybAIgXRza9KypD4gC7nwj/7o40lT08XcBOxJmp0j vvxSnhhRzroJ3dvO9qTvXEQnTB6syElH1AB5obgj31cAoCBuT5mFShgw+SNVEnp21Niu M/vf5iFluGKmRikvvt/mYwyCzb47CYoLPkqfNOYBsayfKYHW2LkOAxHUBJgT6rwpOdZ6 V7Z0R5mVGzhttM6fnoRcIiJz341bP5XeG3tAbPgPMvHQt7wdqlHKm+9I1DpcqXevxaRu uk/A== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20230601; t=1714478536; x=1715083336; h=in-reply-to:content-disposition:mime-version:references:message-id :subject:cc:to:from:date:x-gm-message-state:from:to:cc:subject:date :message-id:reply-to; bh=Zox/qmaglXo0HD/YN8voWJNp1dns8XrdzThPKzYbfYs=; b=S4t3W07aXMNDyscadSR7Tulf5yaY7LoQp6YEif4f/zmpGQEx1uG7e092WIsJ/X6A0s V2Thgovbq8LkrlPZswXrNOVSaddIypANcgYzzifWwT4rW9+YtM7V+UcY4sgPrEdiWR3/ z848qdrbLC1oQig8UArC9RtoOMPnWwgU6QgjaqpZK746QxaNofwaqY9NXGK/CKo3/gh7 0KRvRgkNe62C0DigljNq9ziFNHM+e6CSdD3LzQkEZGUsOUK+mG/o6Xl571Rxk5cGJrqX MLvSVJfyWVpyd+4okUjyrns0KGJtwtZjxjkzRmQzFT43aisKFNRL8BU2EtRX5U5GpJxn subg== X-Forwarded-Encrypted: i=1; AJvYcCVkrZmOQZBz520hfFDItjCSqrIrpb61Angg3ELZHIp97NtoiI5ZC1p1irT9kr9o4fwBJEnlctkvkv5wmjTDwwqBn+PM/93twcGH9CpxuOLiBh7qJXRAk7G8Q5EmJmCRHZvo5ZGo47rpl7+xRpv4Ncvt/4UM96sgxvCWITuvjwq93p04RdRlihsz X-Gm-Message-State: AOJu0YyXHY3+nEracrL27qTFk3SNOiykWV0ax3s9+KK/gYun29glGlmH Al83RJxXJTN8qFl9APuKuZrlKAyxy8p8zSc2WbmzvACUCy/aWzfw X-Google-Smtp-Source: AGHT+IEm3BEi0uEfxCxsS46zHZU+iHIkKBDuGFJu0IExFYzQtNGkHdUxuvrOiz7C2B6tfd+FYUZPSA== X-Received: by 2002:a05:6512:12cb:b0:51d:53fa:6530 with SMTP id p11-20020a05651212cb00b0051d53fa6530mr8597982lfg.28.1714478535490; Tue, 30 Apr 2024 05:02:15 -0700 (PDT) Received: from fedora ([213.255.186.46]) by smtp.gmail.com with ESMTPSA id v4-20020ac258e4000000b00516cba5b4cesm4479734lfo.46.2024.04.30.05.02.13 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Tue, 30 Apr 2024 05:02:14 -0700 (PDT) Date: Tue, 30 Apr 2024 15:02:10 +0300 From: Matti Vaittinen To: Matti Vaittinen , Matti Vaittinen Cc: Lee Jones , Rob Herring , Krzysztof Kozlowski , Conor Dooley , Liam Girdwood , Mark Brown , Matti Vaittinen , Wim Van Sebroeck , Guenter Roeck , devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-watchdog@vger.kernel.org Subject: [PATCH v1 6/6] MAINTAINERS: Add ROHM BD96801 'scalable PMIC' entries Message-ID: References: Precedence: bulk X-Mailing-List: linux-watchdog@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 Content-Disposition: inline In-Reply-To: Add maintainer entries for ROHM BD96801 a.k.a 'scalable PMIC' drivers to be reviewed by ROHM people. Signed-off-by: Matti Vaittinen --- MAINTAINERS | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/MAINTAINERS b/MAINTAINERS index aa3b947fb080..da68144d51ae 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -19111,17 +19111,21 @@ F: drivers/gpio/gpio-bd71828.c F: drivers/mfd/rohm-bd71828.c F: drivers/mfd/rohm-bd718x7.c F: drivers/mfd/rohm-bd9576.c +F: drivers/mfd/rohm-bd96801.c F: drivers/regulator/bd71815-regulator.c F: drivers/regulator/bd71828-regulator.c F: drivers/regulator/bd718x7-regulator.c F: drivers/regulator/bd9576-regulator.c +F: drivers/regulator/bd96801-regulator.c F: drivers/regulator/rohm-regulator.c F: drivers/rtc/rtc-bd70528.c F: drivers/watchdog/bd9576_wdt.c +F: drivers/watchdog/bd96801_wdt.c F: include/linux/mfd/rohm-bd71815.h F: include/linux/mfd/rohm-bd71828.h F: include/linux/mfd/rohm-bd718x7.h F: include/linux/mfd/rohm-bd957x.h +F: include/linux/mfd/rohm-bd96801.h F: include/linux/mfd/rohm-generic.h F: include/linux/mfd/rohm-shared.h