From patchwork Wed Jun 19 06:49:00 2024 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: "Paller, Kim Seer" X-Patchwork-Id: 13703455 Received: from mx0a-00128a01.pphosted.com (mx0a-00128a01.pphosted.com [148.163.135.77]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.subspace.kernel.org (Postfix) with ESMTPS id C280050280; Wed, 19 Jun 2024 06:49:53 +0000 (UTC) Authentication-Results: smtp.subspace.kernel.org; arc=none smtp.client-ip=148.163.135.77 ARC-Seal: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1718779795; cv=none; b=upCQDoUhvTSfkg0jDkdDS9I7M7wqoZVeOVtBNcuLChYXk2Jsc1q1HSQSQP7ATKnI9VhFTdrRIDvC/GodvmdRlZzhMSyKr/4yLADQ9Cr+hIsyqJalRGVkS6ciR/nQv5fvFGwAzi5zg2cB43t41bSDAnYi1YexVNjU86ZhTSkQRMM= ARC-Message-Signature: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1718779795; c=relaxed/simple; bh=I+CXTagreL7fKO/W4/j2zsvsfD2mANdRkzn+/ifW9WQ=; h=From:To:CC:Subject:Date:Message-ID:In-Reply-To:References: MIME-Version:Content-Type; b=rxiX4wCpaGRzVKiztSYtEUxpLyfo0QYm2GRIOu3adZo2n1VNoslJnvcW+HpHL1cU0S2HR+VaL4CxWzvIRbhk4BvAHK1rkJ9F1MRPa8Edl1VS3VjNrBgWpNloTWxSensF5bx2I0i8K+N3YwevbuLYP9g24KnRPU7YGY6BOdPLg+E= ARC-Authentication-Results: i=1; smtp.subspace.kernel.org; dmarc=pass (p=none dis=none) header.from=analog.com; spf=pass smtp.mailfrom=analog.com; dkim=pass (2048-bit key) header.d=analog.com header.i=@analog.com header.b=HD/izvfF; arc=none smtp.client-ip=148.163.135.77 Authentication-Results: smtp.subspace.kernel.org; dmarc=pass (p=none dis=none) header.from=analog.com Authentication-Results: smtp.subspace.kernel.org; spf=pass smtp.mailfrom=analog.com Authentication-Results: smtp.subspace.kernel.org; dkim=pass (2048-bit key) header.d=analog.com header.i=@analog.com header.b="HD/izvfF" Received: from pps.filterd (m0167088.ppops.net [127.0.0.1]) by mx0a-00128a01.pphosted.com (8.18.1.2/8.18.1.2) with ESMTP id 45J3n0j0005194; Wed, 19 Jun 2024 02:49:38 -0400 DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=analog.com; h=cc :content-transfer-encoding:content-type:date:from:in-reply-to :message-id:mime-version:references:subject:to; s=DKIM; bh=q2rZ+ /fy8q/Wv7rOt9uSKSPfi3UDfAxEuQjAB6sckIM=; b=HD/izvfFBNdFDTUUzICFq E8YMQMfmRv2k/QIeRMU6tpGCgGLonSXYQYuVFNMvtMpd9R/iTJwOX7IWNSdfNiPD 7QZ8hdUEzLRQjiO+VBt9UGtmVStbibzP4eXIS+tkG6SAXTWtN9HlkXgCMGulX+QA TuJAgmcEDmFF3OvmB4D63mKYrhWqTQoCNLzdwBSOXEmXEv4Jo54H2a+BGpEMubxj hROIRCGia9+n/UEbksgKN6dJ5zy5EqWrj8zJ13ssf91R3sSywGN9qjPO05v7UDlm uyz/AQ9FBJFoiGsVuSlfplC72dFmYKpFGu2Gh8Vy94K+vosKPNDWO3aO3wt2K5zD A== Received: from nwd2mta4.analog.com ([137.71.173.58]) by mx0a-00128a01.pphosted.com (PPS) with ESMTPS id 3yuj8qhn6s-1 (version=TLSv1.2 cipher=ECDHE-RSA-AES256-GCM-SHA384 bits=256 verify=NOT); Wed, 19 Jun 2024 02:49:38 -0400 (EDT) Received: from ASHBMBX8.ad.analog.com (ASHBMBX8.ad.analog.com [10.64.17.5]) by nwd2mta4.analog.com (8.14.7/8.14.7) with ESMTP id 45J6nbnd038924 (version=TLSv1/SSLv3 cipher=ECDHE-RSA-AES256-GCM-SHA384 bits=256 verify=FAIL); Wed, 19 Jun 2024 02:49:37 -0400 Received: from ASHBMBX8.ad.analog.com (10.64.17.5) by ASHBMBX8.ad.analog.com (10.64.17.5) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384) id 15.2.986.14; Wed, 19 Jun 2024 02:49:36 -0400 Received: from zeus.spd.analog.com (10.66.68.11) by ashbmbx8.ad.analog.com (10.64.17.5) with Microsoft SMTP Server id 15.2.986.14 via Frontend Transport; Wed, 19 Jun 2024 02:49:36 -0400 Received: from kim-VirtualBox.ad.analog.com (KPALLER2-L03.ad.analog.com [10.117.220.25]) by zeus.spd.analog.com (8.15.1/8.15.1) with ESMTP id 45J6nEvf011796; Wed, 19 Jun 2024 02:49:25 -0400 From: Kim Seer Paller To: , , CC: Jonathan Cameron , David Lechner , Lars-Peter Clausen , Liam Girdwood , Mark Brown , Dimitri Fedrau , Krzysztof Kozlowski , Rob Herring , Conor Dooley , Michael Hennerich , =?utf-8?q?Nuno_S=C3=A1?= , Kim Seer Paller Subject: [PATCH v4 1/5] iio: ABI: Generalize ABI documentation for DAC Date: Wed, 19 Jun 2024 14:49:00 +0800 Message-ID: <20240619064904.73832-2-kimseer.paller@analog.com> X-Mailer: git-send-email 2.34.1 In-Reply-To: <20240619064904.73832-1-kimseer.paller@analog.com> References: <20240619064904.73832-1-kimseer.paller@analog.com> Precedence: bulk X-Mailing-List: linux-iio@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 X-ADIRuleOP-NewSCL: Rule Triggered X-Proofpoint-ORIG-GUID: aCuzbEDjlGZ_T2nwr6GaiBtd2WoAiC58 X-Proofpoint-GUID: aCuzbEDjlGZ_T2nwr6GaiBtd2WoAiC58 X-Proofpoint-Virus-Version: vendor=baseguard engine=ICAP:2.0.293,Aquarius:18.0.1039,Hydra:6.0.680,FMLib:17.12.28.16 definitions=2024-06-19_02,2024-06-17_01,2024-05-17_01 X-Proofpoint-Spam-Details: rule=outbound_notspam policy=outbound score=0 priorityscore=1501 malwarescore=0 spamscore=0 suspectscore=0 lowpriorityscore=0 bulkscore=0 impostorscore=0 clxscore=1011 phishscore=0 mlxscore=0 mlxlogscore=978 adultscore=0 classifier=spam adjust=0 reason=mlx scancount=1 engine=8.19.0-2405170001 definitions=main-2406190049 Introduces a more generalized ABI documentation for DAC. Instead of having separate ABI files for each DAC, we now have a single ABI file that covers the common sysfs interface for all DAC. Co-developed-by: Michael Hennerich Signed-off-by: Michael Hennerich Signed-off-by: Kim Seer Paller --- Documentation/ABI/testing/sysfs-bus-iio-dac | 61 +++++++++++++++++++ .../ABI/testing/sysfs-bus-iio-dac-ltc2688 | 31 ---------- 2 files changed, 61 insertions(+), 31 deletions(-) create mode 100644 Documentation/ABI/testing/sysfs-bus-iio-dac diff --git a/Documentation/ABI/testing/sysfs-bus-iio-dac b/Documentation/ABI/testing/sysfs-bus-iio-dac new file mode 100644 index 000000000000..810eaac5533c --- /dev/null +++ b/Documentation/ABI/testing/sysfs-bus-iio-dac @@ -0,0 +1,61 @@ +What: /sys/bus/iio/devices/iio:deviceX/out_currentY_toggle_en +KernelVersion: 5.18 +Contact: linux-iio@vger.kernel.org +Description: + Toggle enable. Write 1 to enable toggle or 0 to disable it. This + is useful when one wants to change the DAC output codes. For + autonomous toggling, the way it should be done is: + + - disable toggle operation; + - change out_currentY_rawN, where N is the integer value of the symbol; + - enable toggle operation. + +What: /sys/bus/iio/devices/iio:deviceX/out_currentY_rawN +KernelVersion: 5.18 +Contact: linux-iio@vger.kernel.org +Description: + This attribute has the same meaning as out_currentY_raw. It is + specific to toggle enabled channels and refers to the DAC output + code in INPUT_N (_rawN), where N is the integer value of the symbol. + The same scale and offset as in out_currentY_raw applies. + +What: /sys/bus/iio/devices/iio:deviceX/out_currentY_symbol +KernelVersion: 5.18 +Contact: linux-iio@vger.kernel.org +Description: + Performs a SW switch to a predefined output symbol. This attribute + is specific to toggle enabled channels and allows switching between + multiple predefined symbols. Each symbol corresponds to a different + output, denoted as out_currentY_rawN, where N is the integer value + of the symbol. Writing an integer value N will select out_currentY_rawN. + +What: /sys/bus/iio/devices/iio:deviceX/out_voltageY_toggle_en +KernelVersion: 5.18 +Contact: linux-iio@vger.kernel.org +Description: + Toggle enable. Write 1 to enable toggle or 0 to disable it. This + is useful when one wants to change the DAC output codes. For + autonomous toggling, the way it should be done is: + + - disable toggle operation; + - change out_voltageY_rawN, where N is the integer value of the symbol; + - enable toggle operation. + +What: /sys/bus/iio/devices/iio:deviceX/out_voltageY_rawN +KernelVersion: 5.18 +Contact: linux-iio@vger.kernel.org +Description: + This attribute has the same meaning as out_currentY_raw. It is + specific to toggle enabled channels and refers to the DAC output + code in INPUT_N (_rawN), where N is the integer value of the symbol. + The same scale and offset as in out_currentY_raw applies. + +What: /sys/bus/iio/devices/iio:deviceX/out_voltageY_symbol +KernelVersion: 5.18 +Contact: linux-iio@vger.kernel.org +Description: + Performs a SW switch to a predefined output symbol. This attribute + is specific to toggle enabled channels and allows switching between + multiple predefined symbols. Each symbol corresponds to a different + output, denoted as out_voltageY_rawN, where N is the integer value + of the symbol. Writing an integer value N will select out_voltageY_rawN. diff --git a/Documentation/ABI/testing/sysfs-bus-iio-dac-ltc2688 b/Documentation/ABI/testing/sysfs-bus-iio-dac-ltc2688 index 1c35971277ba..ae95a5477382 100644 --- a/Documentation/ABI/testing/sysfs-bus-iio-dac-ltc2688 +++ b/Documentation/ABI/testing/sysfs-bus-iio-dac-ltc2688 @@ -53,34 +53,3 @@ KernelVersion: 5.18 Contact: linux-iio@vger.kernel.org Description: Returns the available values for the dither phase. - -What: /sys/bus/iio/devices/iio:deviceX/out_voltageY_toggle_en -KernelVersion: 5.18 -Contact: linux-iio@vger.kernel.org -Description: - Toggle enable. Write 1 to enable toggle or 0 to disable it. This is - useful when one wants to change the DAC output codes. The way it should - be done is: - - - disable toggle operation; - - change out_voltageY_raw0 and out_voltageY_raw1; - - enable toggle operation. - -What: /sys/bus/iio/devices/iio:deviceX/out_voltageY_raw0 -What: /sys/bus/iio/devices/iio:deviceX/out_voltageY_raw1 -KernelVersion: 5.18 -Contact: linux-iio@vger.kernel.org -Description: - It has the same meaning as out_voltageY_raw. This attribute is - specific to toggle enabled channels and refers to the DAC output - code in INPUT_A (_raw0) and INPUT_B (_raw1). The same scale and offset - as in out_voltageY_raw applies. - -What: /sys/bus/iio/devices/iio:deviceX/out_voltageY_symbol -KernelVersion: 5.18 -Contact: linux-iio@vger.kernel.org -Description: - Performs a SW toggle. This attribute is specific to toggle - enabled channels and allows to toggle between out_voltageY_raw0 - and out_voltageY_raw1 through software. Writing 0 will select - out_voltageY_raw0 while 1 selects out_voltageY_raw1. From patchwork Wed Jun 19 06:49:01 2024 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: "Paller, Kim Seer" X-Patchwork-Id: 13703456 Received: from mx0a-00128a01.pphosted.com (mx0a-00128a01.pphosted.com [148.163.135.77]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.subspace.kernel.org (Postfix) with ESMTPS id 7A4387347D; Wed, 19 Jun 2024 06:49:56 +0000 (UTC) Authentication-Results: smtp.subspace.kernel.org; arc=none smtp.client-ip=148.163.135.77 ARC-Seal: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1718779797; cv=none; b=DWHrxM076glhtd15R0RRn3SCaJfpvTOu4OKMH1C++oi7Mm1yQegEL6vxsu1TdBHy/cSlMDmL2gf+QA5vRwt95sVljaZ7F5Af160Fmel0EkvaxuksouC8MpJIR1tVNU4yjI3Va5YmkhBdiU1cdyTbIEoHOQo7cp6yWSCex10J3so= ARC-Message-Signature: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1718779797; c=relaxed/simple; bh=nwcfMSqH/kYP13NwxoZHW2cMqyqNnTFrGEgNrkNtHrY=; h=From:To:CC:Subject:Date:Message-ID:In-Reply-To:References: MIME-Version:Content-Type; b=GsJIKOuil70Edxf4DJupbaqjAID6fSVWT68pl5v+ucqYepETQ+uWfh7MDUgpPtxDZ5CgR6QJU63N/90x/WGf6K+nT7+y2MEIsQdryjqR6Prr/WVXHhIGCYJEty1NHcmkkhU5YOlJwW8u5u6ixcCRr7Fnc32z2qJBFJ+vUQzDAhQ= ARC-Authentication-Results: i=1; smtp.subspace.kernel.org; dmarc=pass (p=none dis=none) header.from=analog.com; spf=pass smtp.mailfrom=analog.com; dkim=pass (2048-bit key) header.d=analog.com header.i=@analog.com header.b=rx2RdFcn; arc=none smtp.client-ip=148.163.135.77 Authentication-Results: smtp.subspace.kernel.org; dmarc=pass (p=none dis=none) header.from=analog.com Authentication-Results: smtp.subspace.kernel.org; spf=pass smtp.mailfrom=analog.com Authentication-Results: smtp.subspace.kernel.org; dkim=pass (2048-bit key) header.d=analog.com header.i=@analog.com header.b="rx2RdFcn" Received: from pps.filterd (m0167088.ppops.net [127.0.0.1]) by mx0a-00128a01.pphosted.com (8.18.1.2/8.18.1.2) with ESMTP id 45J46BOa005313; Wed, 19 Jun 2024 02:49:42 -0400 DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=analog.com; h=cc :content-transfer-encoding:content-type:date:from:in-reply-to :message-id:mime-version:references:subject:to; s=DKIM; bh=t2sD/ uYPph7dRsIn+CWLNsx6Jr3+Cb+Sw0FU5tjTH0E=; b=rx2RdFcnyjVPdPRQvlLRs WRSHyvpXeK3bmbKW4qsoMltaszxRy4IghuA+77i/eq4YPNfjYBmgrcUMVm/B/5vd FQizsb/f832zLLUnNSAm79YZMEXjM70qd/UgMQRRpXbqf7yjzbGzGmh4UeBxsJc6 /GWqHFwZDtdqqsTmFm4QkycExuXgQ27GgE+LA3t+9Y7vQSMykXNDLZJ/Tw+Wec7j FKbNF2ZjOqqP8qwYJex+7c3yG4oJP9Inc5RK3z/FJ6DG8pPM/BiEz07X3vy70Nb8 oluMBuceiuBkDVDAXDBtf3GJGxTQu/DoXvvGT+U9tFgYG0a258EEADSUSC2NPhXV Q== Received: from nwd2mta3.analog.com ([137.71.173.56]) by mx0a-00128a01.pphosted.com (PPS) with ESMTPS id 3yuj8qhn72-1 (version=TLSv1.2 cipher=ECDHE-RSA-AES256-GCM-SHA384 bits=256 verify=NOT); Wed, 19 Jun 2024 02:49:42 -0400 (EDT) Received: from ASHBMBX9.ad.analog.com (ASHBMBX9.ad.analog.com [10.64.17.10]) by nwd2mta3.analog.com (8.14.7/8.14.7) with ESMTP id 45J6nf2f048537 (version=TLSv1/SSLv3 cipher=ECDHE-RSA-AES256-GCM-SHA384 bits=256 verify=FAIL); Wed, 19 Jun 2024 02:49:41 -0400 Received: from ASHBMBX8.ad.analog.com (10.64.17.5) by ASHBMBX9.ad.analog.com (10.64.17.10) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384) id 15.2.986.14; Wed, 19 Jun 2024 02:49:40 -0400 Received: from zeus.spd.analog.com (10.66.68.11) by ashbmbx8.ad.analog.com (10.64.17.5) with Microsoft SMTP Server id 15.2.986.14 via Frontend Transport; Wed, 19 Jun 2024 02:49:40 -0400 Received: from kim-VirtualBox.ad.analog.com (KPALLER2-L03.ad.analog.com [10.117.220.25]) by zeus.spd.analog.com (8.15.1/8.15.1) with ESMTP id 45J6nEvg011796; Wed, 19 Jun 2024 02:49:29 -0400 From: Kim Seer Paller To: , , CC: Jonathan Cameron , David Lechner , Lars-Peter Clausen , Liam Girdwood , Mark Brown , Dimitri Fedrau , Krzysztof Kozlowski , Rob Herring , Conor Dooley , Michael Hennerich , =?utf-8?q?Nuno_S=C3=A1?= , Kim Seer Paller Subject: [PATCH v4 2/5] iio: ABI: add DAC 42kohm_to_gnd powerdown mode Date: Wed, 19 Jun 2024 14:49:01 +0800 Message-ID: <20240619064904.73832-3-kimseer.paller@analog.com> X-Mailer: git-send-email 2.34.1 In-Reply-To: <20240619064904.73832-1-kimseer.paller@analog.com> References: <20240619064904.73832-1-kimseer.paller@analog.com> Precedence: bulk X-Mailing-List: linux-iio@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 X-ADIRuleOP-NewSCL: Rule Triggered X-Proofpoint-ORIG-GUID: vdTQqL7p9quEImF0DZb1l2SwwFPJ7Tyo X-Proofpoint-GUID: vdTQqL7p9quEImF0DZb1l2SwwFPJ7Tyo X-Proofpoint-Virus-Version: vendor=baseguard engine=ICAP:2.0.293,Aquarius:18.0.1039,Hydra:6.0.680,FMLib:17.12.28.16 definitions=2024-06-19_02,2024-06-17_01,2024-05-17_01 X-Proofpoint-Spam-Details: rule=outbound_notspam policy=outbound score=0 priorityscore=1501 malwarescore=0 spamscore=0 suspectscore=0 lowpriorityscore=0 bulkscore=0 impostorscore=0 clxscore=1015 phishscore=0 mlxscore=0 mlxlogscore=993 adultscore=0 classifier=spam adjust=0 reason=mlx scancount=1 engine=8.19.0-2405170001 definitions=main-2406190049 Add a new powerdown mode for DACs with 42kohm resistor to GND. Co-developed-by: Michael Hennerich Signed-off-by: Michael Hennerich Signed-off-by: Kim Seer Paller --- Documentation/ABI/testing/sysfs-bus-iio | 1 + 1 file changed, 1 insertion(+) diff --git a/Documentation/ABI/testing/sysfs-bus-iio b/Documentation/ABI/testing/sysfs-bus-iio index 7cee78ad4108..6ee58f59065b 100644 --- a/Documentation/ABI/testing/sysfs-bus-iio +++ b/Documentation/ABI/testing/sysfs-bus-iio @@ -708,6 +708,7 @@ Description: 2.5kohm_to_gnd: connected to ground via a 2.5kOhm resistor, 6kohm_to_gnd: connected to ground via a 6kOhm resistor, 20kohm_to_gnd: connected to ground via a 20kOhm resistor, + 42kohm_to_gnd: connected to ground via a 42kOhm resistor, 90kohm_to_gnd: connected to ground via a 90kOhm resistor, 100kohm_to_gnd: connected to ground via an 100kOhm resistor, 125kohm_to_gnd: connected to ground via an 125kOhm resistor, From patchwork Wed Jun 19 06:49:02 2024 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 8bit X-Patchwork-Submitter: "Paller, Kim Seer" X-Patchwork-Id: 13703457 Received: from mx0a-00128a01.pphosted.com (mx0a-00128a01.pphosted.com [148.163.135.77]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.subspace.kernel.org (Postfix) with ESMTPS id 858EA74E09; Wed, 19 Jun 2024 06:50:00 +0000 (UTC) Authentication-Results: smtp.subspace.kernel.org; arc=none smtp.client-ip=148.163.135.77 ARC-Seal: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1718779802; cv=none; b=n8oiWEeZExJREQDY64KNFBM9MZGn2BIqdVsNbSZweMeqUJaV4HAdJSrhn5D5hb56si1MFUMP2/PiUW1OiIJhmEoGx744s4pqqZKksTYI2bRCRG7w/pIfM/gDdsl7+sseVj5PMu5EnZ7sS/Asg1dSAVPLrR2JnZ6se1pImzIXzic= ARC-Message-Signature: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1718779802; c=relaxed/simple; bh=GOVaXcnsyxI6NC09iHEtun/pdzgqZgNnAAx0DzgZuOE=; h=From:To:CC:Subject:Date:Message-ID:In-Reply-To:References: MIME-Version:Content-Type; b=i/n97Z7L//t5kOjW8nOyVk/v6qhgQ0Fa0hlSXhMmMh5OZaQZZCjP7gK6/WFVedL35oeC3ygSCj6Nbk38RxMWJbCO15i3glq+dO+4Jheg1QryEjtTB8d2kb90plvoXVSuP0hq3/50m6tYpAhj1KUBDj+cSmpprqwn5TzVsc+jNR0= ARC-Authentication-Results: i=1; smtp.subspace.kernel.org; dmarc=pass (p=none dis=none) header.from=analog.com; spf=pass smtp.mailfrom=analog.com; dkim=pass (2048-bit key) header.d=analog.com header.i=@analog.com header.b=NDKKNMI6; arc=none smtp.client-ip=148.163.135.77 Authentication-Results: smtp.subspace.kernel.org; dmarc=pass (p=none dis=none) header.from=analog.com Authentication-Results: smtp.subspace.kernel.org; spf=pass smtp.mailfrom=analog.com Authentication-Results: smtp.subspace.kernel.org; dkim=pass (2048-bit key) header.d=analog.com header.i=@analog.com header.b="NDKKNMI6" Received: from pps.filterd (m0167088.ppops.net [127.0.0.1]) by mx0a-00128a01.pphosted.com (8.18.1.2/8.18.1.2) with ESMTP id 45J46BOb005313; Wed, 19 Jun 2024 02:49:46 -0400 DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=analog.com; h=cc :content-transfer-encoding:content-type:date:from:in-reply-to :message-id:mime-version:references:subject:to; s=DKIM; bh=SIixs yJHRSDsOkkPxaNQ1066bSyx75ECH3njukDS4Zc=; b=NDKKNMI6t+AzENNOVsGtp jbZrYNbQg2zpBa8JZJEHz0zvBffazms8tWnMVi9icL+8IK0W13uwkzWJHrACFQOZ 446lNBp9VHNy/X3VOEQGad8ykoI87PztEK5DhWJHgbikM3VUCQGtTSFXQVhcK8uQ USv1B4f6c+RYlXv8nw6/MBcl2W2ae+HEx3QO9kYvSkqDJL2qa3RWugMQVUfENZ3S 6nrSib+cQ8iKJBEvQCYAdJUCASSiqIHLY2oUX6Flq9fMV8h8SRMI4LgILlhizmbg UPBbY7NEPzrmoC0MBsp1lqmtlR92BHUk66emuXBCSR1F8lGgw/2v1cBBF2//pfbl g== Received: from nwd2mta4.analog.com ([137.71.173.58]) by mx0a-00128a01.pphosted.com (PPS) with ESMTPS id 3yuj8qhn79-1 (version=TLSv1.2 cipher=ECDHE-RSA-AES256-GCM-SHA384 bits=256 verify=NOT); Wed, 19 Jun 2024 02:49:45 -0400 (EDT) Received: from ASHBMBX8.ad.analog.com (ASHBMBX8.ad.analog.com [10.64.17.5]) by nwd2mta4.analog.com (8.14.7/8.14.7) with ESMTP id 45J6nir2038933 (version=TLSv1/SSLv3 cipher=ECDHE-RSA-AES256-GCM-SHA384 bits=256 verify=FAIL); Wed, 19 Jun 2024 02:49:44 -0400 Received: from ASHBMBX8.ad.analog.com (10.64.17.5) by ASHBMBX8.ad.analog.com (10.64.17.5) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384) id 15.2.986.14; Wed, 19 Jun 2024 02:49:43 -0400 Received: from zeus.spd.analog.com (10.66.68.11) by ashbmbx8.ad.analog.com (10.64.17.5) with Microsoft SMTP Server id 15.2.986.14 via Frontend Transport; Wed, 19 Jun 2024 02:49:43 -0400 Received: from kim-VirtualBox.ad.analog.com (KPALLER2-L03.ad.analog.com [10.117.220.25]) by zeus.spd.analog.com (8.15.1/8.15.1) with ESMTP id 45J6nEvh011796; Wed, 19 Jun 2024 02:49:34 -0400 From: Kim Seer Paller To: , , CC: Jonathan Cameron , David Lechner , Lars-Peter Clausen , Liam Girdwood , Mark Brown , Dimitri Fedrau , Krzysztof Kozlowski , Rob Herring , Conor Dooley , Michael Hennerich , =?utf-8?q?Nuno_S=C3=A1?= , Kim Seer Paller Subject: [PATCH v4 3/5] dt-bindings: iio: dac: Add adi,ltc2664.yaml Date: Wed, 19 Jun 2024 14:49:02 +0800 Message-ID: <20240619064904.73832-4-kimseer.paller@analog.com> X-Mailer: git-send-email 2.34.1 In-Reply-To: <20240619064904.73832-1-kimseer.paller@analog.com> References: <20240619064904.73832-1-kimseer.paller@analog.com> Precedence: bulk X-Mailing-List: linux-iio@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 X-ADIRuleOP-NewSCL: Rule Triggered X-Proofpoint-ORIG-GUID: -hPev5fshNo-y_33U3R6EHxLJSTkbExe X-Proofpoint-GUID: -hPev5fshNo-y_33U3R6EHxLJSTkbExe X-Proofpoint-Virus-Version: vendor=baseguard engine=ICAP:2.0.293,Aquarius:18.0.1039,Hydra:6.0.680,FMLib:17.12.28.16 definitions=2024-06-19_02,2024-06-17_01,2024-05-17_01 X-Proofpoint-Spam-Details: rule=outbound_notspam policy=outbound score=0 priorityscore=1501 malwarescore=0 spamscore=0 suspectscore=0 lowpriorityscore=0 bulkscore=0 impostorscore=0 clxscore=1015 phishscore=0 mlxscore=0 mlxlogscore=999 adultscore=0 classifier=spam adjust=0 reason=mlx scancount=1 engine=8.19.0-2405170001 definitions=main-2406190049 Add documentation for ltc2664. Co-developed-by: Michael Hennerich Signed-off-by: Michael Hennerich Signed-off-by: Kim Seer Paller --- .../bindings/iio/dac/adi,ltc2664.yaml | 167 ++++++++++++++++++ MAINTAINERS | 8 + 2 files changed, 175 insertions(+) create mode 100644 Documentation/devicetree/bindings/iio/dac/adi,ltc2664.yaml diff --git a/Documentation/devicetree/bindings/iio/dac/adi,ltc2664.yaml b/Documentation/devicetree/bindings/iio/dac/adi,ltc2664.yaml new file mode 100644 index 000000000000..be37700e3b1f --- /dev/null +++ b/Documentation/devicetree/bindings/iio/dac/adi,ltc2664.yaml @@ -0,0 +1,167 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/dac/adi,ltc2664.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Analog Devices LTC2664 DAC + +maintainers: + - Michael Hennerich + - Kim Seer Paller + +description: | + Analog Devices LTC2664 4 channel, 12-/16-Bit, +-10V DAC + https://www.analog.com/media/en/technical-documentation/data-sheets/2664fa.pdf + +properties: + compatible: + enum: + - adi,ltc2664 + + reg: + maxItems: 1 + + spi-max-frequency: + maximum: 50000000 + + vcc-supply: + description: Analog Supply Voltage Input. + + v-pos-supply: + description: Positive Supply Voltage Input. + + v-neg-supply: + description: Negative Supply Voltage Input. + + iovcc-supply: + description: Digital Input/Output Supply Voltage. + + ref-supply: + description: + Reference Input/Output. The voltage at the REF pin sets the full-scale + range of all channels. If not provided the internal reference is used and + also provided on the VREF pin. + + reset-gpios: + description: + Active-low Asynchronous Clear Input. A logic low at this level-triggered + input clears the part to the reset code and range determined by the + hardwired option chosen using the MSPAN pins. The control registers are + cleared to zero. + maxItems: 1 + + adi,manual-span-operation-config: + description: + This property must mimic the MSPAN pin configurations. By tying the MSPAN + pins (MSP2, MSP1 and MSP0) to GND and/or VCC, any output range can be + hardware-configured with different mid-scale or zero-scale reset options. + The hardware configuration is latched during power on reset for proper + operation. + 0 - MPS2=GND, MPS1=GND, MSP0=GND (+-10V, reset to 0V) + 1 - MPS2=GND, MPS1=GND, MSP0=VCC (+-5V, reset to 0V) + 2 - MPS2=GND, MPS1=VCC, MSP0=GND (+-2.5V, reset to 0V) + 3 - MPS2=GND, MPS1=VCC, MSP0=VCC (0V to 10, reset to 0V) + 4 - MPS2=VCC, MPS1=GND, MSP0=GND (0V to 10V, reset to 5V) + 5 - MPS2=VCC, MPS1=GND, MSP0=VCC (0V to 5V, reset to 0V) + 6 - MPS2=VCC, MPS1=VCC, MSP0=GND (0V to 5V, reset to 2.5V) + 7 - MPS2=VCC, MPS1=VCC, MSP0=VCC (0V to 5V, reset to 0V, enables SoftSpan) + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 2, 3, 4, 5, 6, 7] + default: 7 + + io-channels: + description: + ADC channel to monitor voltages and temperature at the MUXOUT pin. + maxItems: 1 + + '#address-cells': + const: 1 + + '#size-cells': + const: 0 + +patternProperties: + "^channel@[0-3]$": + type: object + additionalProperties: false + + properties: + reg: + description: The channel number representing the DAC output channel. + maximum: 3 + + adi,toggle-mode: + description: + Set the channel as a toggle enabled channel. Toggle operation enables + fast switching of a DAC output between two different DAC codes without + any SPI transaction. + type: boolean + + adi,output-range-microvolt: + description: Specify the channel output full scale range. + oneOf: + - items: + - const: 0 + - enum: [5000000, 10000000] + - items: + - const: -5000000 + - const: 5000000 + - items: + - const: -10000000 + - const: 10000000 + - items: + - const: -2500000 + - const: 2500000 + + required: + - reg + - adi,output-range-microvolt + +required: + - compatible + - reg + - spi-max-frequency + - vcc-supply + - iovcc-supply + - v-pos-supply + - v-neg-supply + +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +additionalProperties: false + +examples: + - | + spi { + #address-cells = <1>; + #size-cells = <0>; + dac@0 { + compatible = "adi,ltc2664"; + reg = <0>; + spi-max-frequency = <10000000>; + + vcc-supply = <&vcc>; + iovcc-supply = <&vcc>; + ref-supply = <&vref>; + v-pos-supply = <&vpos>; + v-neg-supply = <&vneg>; + + io-channels = <&adc 0>; + + #address-cells = <1>; + #size-cells = <0>; + channel@0 { + reg = <0>; + adi,toggle-mode; + adi,output-range-microvolt = <(-10000000) 10000000>; + }; + + channel@1 { + reg = <1>; + adi,output-range-microvolt = <0 10000000>; + }; + }; + }; +... diff --git a/MAINTAINERS b/MAINTAINERS index be590c462d91..849800d9cbf7 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -13074,6 +13074,14 @@ S: Maintained F: Documentation/devicetree/bindings/iio/dac/lltc,ltc1660.yaml F: drivers/iio/dac/ltc1660.c +LTC2664 IIO DAC DRIVER +M: Michael Hennerich +M: Kim Seer Paller +L: linux-iio@vger.kernel.org +S: Supported +W: https://ez.analog.com/linux-software-drivers +F: Documentation/devicetree/bindings/iio/dac/adi,ltc2664.yaml + LTC2688 IIO DAC DRIVER M: Nuno Sá L: linux-iio@vger.kernel.org From patchwork Wed Jun 19 06:49:03 2024 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 8bit X-Patchwork-Submitter: "Paller, Kim Seer" X-Patchwork-Id: 13703458 Received: from mx0a-00128a01.pphosted.com (mx0a-00128a01.pphosted.com [148.163.135.77]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.subspace.kernel.org (Postfix) with ESMTPS id AA9586F30D; Wed, 19 Jun 2024 06:50:04 +0000 (UTC) Authentication-Results: smtp.subspace.kernel.org; arc=none smtp.client-ip=148.163.135.77 ARC-Seal: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1718779806; cv=none; b=bosFDKAcB04U5MejFd/cAGtJOPnz2nauDq5tpYSHHO6VfwZj779lQpbsilE/wqWBKzvIYz5DLOl+Rq9FzRT8wrjc1JLkFdpjjhajRZPCAhhPA2ZYajDoBQsd560boDwmSv/HYqsGUJDcDVb0ZBILEUC7H2EYjksralBEpWnyLUE= ARC-Message-Signature: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1718779806; c=relaxed/simple; bh=j1TXyKxplcu22FDOA1UfupIl1U3Pd2nQk3ThtSxajbs=; h=From:To:CC:Subject:Date:Message-ID:In-Reply-To:References: MIME-Version:Content-Type; b=Zu1AaTB7qcuEKJ06JVidDlk5xduV3x3yoe7tlEID/tf+MLhIc+1mAE8mw0wpVzL7SFry4VlxQUpEJB78LR8Q9Rbl+HNvVOOGKc5ICSgtmb+KFN3WzNKK16qYdvhEdq8+1IV7BH3cn/en96poFFJxawgHc+HU53k6USolPUhtCYQ= ARC-Authentication-Results: i=1; smtp.subspace.kernel.org; dmarc=pass (p=none dis=none) header.from=analog.com; spf=pass smtp.mailfrom=analog.com; dkim=pass (2048-bit key) header.d=analog.com header.i=@analog.com header.b=ZKdnTrDE; arc=none smtp.client-ip=148.163.135.77 Authentication-Results: smtp.subspace.kernel.org; dmarc=pass (p=none dis=none) header.from=analog.com Authentication-Results: smtp.subspace.kernel.org; spf=pass smtp.mailfrom=analog.com Authentication-Results: smtp.subspace.kernel.org; dkim=pass (2048-bit key) header.d=analog.com header.i=@analog.com header.b="ZKdnTrDE" Received: from pps.filterd (m0167088.ppops.net [127.0.0.1]) by mx0a-00128a01.pphosted.com (8.18.1.2/8.18.1.2) with ESMTP id 45J3pmab005198; Wed, 19 Jun 2024 02:49:49 -0400 DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=analog.com; h=cc :content-transfer-encoding:content-type:date:from:in-reply-to :message-id:mime-version:references:subject:to; s=DKIM; bh=8SYPP uRpQaCMcsy+6mlIs8dnOEIBpb4kkqm/36XGRYM=; b=ZKdnTrDEAyR8TxhUdQfbC h681++Z9Gu0tpUcVFnMD3t7mvSXB1NjkmYZLwtsJwdljAdhg0Ym/9yOT2tSyFj4y 0XnqYTzM5g4HCqI+MpQwGfVXM5GEgA790KaOhOLq4wu3+PI2Kt4YuiCBKA/QN6ft voS5N8MjinxwDn/1YjaOdpd4PT85KmNsEvGB/6W42oaBkmMFSCpOYcFbhqeJFv+5 Lm6POUI8r33NE8iUN+vhEFieIFYkFddXoCZnzIc1eMoCBAc/eMaMEuszgxwZDXXQ eArhr+hPJJJP12yuFRa8xY44iMOhY4iYCyIspfy0mDZxeP4l5bLZQ6xRSn5t26xm Q== Received: from nwd2mta4.analog.com ([137.71.173.58]) by mx0a-00128a01.pphosted.com (PPS) with ESMTPS id 3yuj8qhn7c-1 (version=TLSv1.2 cipher=ECDHE-RSA-AES256-GCM-SHA384 bits=256 verify=NOT); Wed, 19 Jun 2024 02:49:49 -0400 (EDT) Received: from ASHBMBX8.ad.analog.com (ASHBMBX8.ad.analog.com [10.64.17.5]) by nwd2mta4.analog.com (8.14.7/8.14.7) with ESMTP id 45J6nmUq038939 (version=TLSv1/SSLv3 cipher=ECDHE-RSA-AES256-GCM-SHA384 bits=256 verify=FAIL); Wed, 19 Jun 2024 02:49:48 -0400 Received: from ASHBMBX8.ad.analog.com (10.64.17.5) by ASHBMBX8.ad.analog.com (10.64.17.5) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384) id 15.2.986.14; Wed, 19 Jun 2024 02:49:47 -0400 Received: from zeus.spd.analog.com (10.66.68.11) by ashbmbx8.ad.analog.com (10.64.17.5) with Microsoft SMTP Server id 15.2.986.14 via Frontend Transport; Wed, 19 Jun 2024 02:49:47 -0400 Received: from kim-VirtualBox.ad.analog.com (KPALLER2-L03.ad.analog.com [10.117.220.25]) by zeus.spd.analog.com (8.15.1/8.15.1) with ESMTP id 45J6nEvi011796; Wed, 19 Jun 2024 02:49:38 -0400 From: Kim Seer Paller To: , , CC: Jonathan Cameron , David Lechner , Lars-Peter Clausen , Liam Girdwood , Mark Brown , Dimitri Fedrau , Krzysztof Kozlowski , Rob Herring , Conor Dooley , Michael Hennerich , =?utf-8?q?Nuno_S=C3=A1?= , Kim Seer Paller Subject: [PATCH v4 4/5] dt-bindings: iio: dac: Add adi,ltc2672.yaml Date: Wed, 19 Jun 2024 14:49:03 +0800 Message-ID: <20240619064904.73832-5-kimseer.paller@analog.com> X-Mailer: git-send-email 2.34.1 In-Reply-To: <20240619064904.73832-1-kimseer.paller@analog.com> References: <20240619064904.73832-1-kimseer.paller@analog.com> Precedence: bulk X-Mailing-List: linux-iio@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 X-ADIRuleOP-NewSCL: Rule Triggered X-Proofpoint-ORIG-GUID: hPNGItZuQmEAQN2_0sD2-FBFcYRszwBr X-Proofpoint-GUID: hPNGItZuQmEAQN2_0sD2-FBFcYRszwBr X-Proofpoint-Virus-Version: vendor=baseguard engine=ICAP:2.0.293,Aquarius:18.0.1039,Hydra:6.0.680,FMLib:17.12.28.16 definitions=2024-06-19_02,2024-06-17_01,2024-05-17_01 X-Proofpoint-Spam-Details: rule=outbound_notspam policy=outbound score=0 priorityscore=1501 malwarescore=0 spamscore=0 suspectscore=0 lowpriorityscore=0 bulkscore=0 impostorscore=0 clxscore=1015 phishscore=0 mlxscore=0 mlxlogscore=999 adultscore=0 classifier=spam adjust=0 reason=mlx scancount=1 engine=8.19.0-2405170001 definitions=main-2406190049 Add documentation for ltc2672. Co-developed-by: Michael Hennerich Signed-off-by: Michael Hennerich Signed-off-by: Kim Seer Paller --- .../bindings/iio/dac/adi,ltc2672.yaml | 158 ++++++++++++++++++ MAINTAINERS | 1 + 2 files changed, 159 insertions(+) create mode 100644 Documentation/devicetree/bindings/iio/dac/adi,ltc2672.yaml diff --git a/Documentation/devicetree/bindings/iio/dac/adi,ltc2672.yaml b/Documentation/devicetree/bindings/iio/dac/adi,ltc2672.yaml new file mode 100644 index 000000000000..0ccf53fb22cc --- /dev/null +++ b/Documentation/devicetree/bindings/iio/dac/adi,ltc2672.yaml @@ -0,0 +1,158 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/dac/adi,ltc2672.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Analog Devices LTC2672 DAC + +maintainers: + - Michael Hennerich + - Kim Seer Paller + +description: | + Analog Devices LTC2672 5 channel, 12-/16-Bit, 300mA DAC + https://www.analog.com/media/en/technical-documentation/data-sheets/ltc2672.pdf + +properties: + compatible: + enum: + - adi,ltc2672 + + reg: + maxItems: 1 + + spi-max-frequency: + maximum: 50000000 + + vcc-supply: + description: Analog Supply Voltage Input. + + v-neg-supply: + description: Negative Supply Voltage Input. + + vdd0-supply: + description: Positive Supply Voltage Input for DAC OUT0. + + vdd1-supply: + description: Positive Supply Voltage Input for DAC OUT1. + + vdd2-supply: + description: Positive Supply Voltage Input for DAC OUT2. + + vdd3-supply: + description: Positive Supply Voltage Input for DAC OUT3. + + vdd4-supply: + description: Positive Supply Voltage Input for DAC OUT4. + + iovcc-supply: + description: Digital Input/Output Supply Voltage. + + ref-supply: + description: + Reference Input/Output. The voltage at the REF pin sets the full-scale + range of all channels. If not provided the internal reference is used and + also provided on the VREF pin. + + reset-gpios: + description: + Active Low Asynchronous Clear Input. A logic low at this level triggered + input clears the device to the default reset code and output range, which + is zero-scale with the outputs off. The control registers are cleared to + zero. + maxItems: 1 + + adi,rfsadj-ohms: + description: + If FSADJ is tied to VCC, an internal RFSADJ (20 kΩ) is selected, which + results in nominal output ranges. When an external resistor of 19 kΩ to + 41 kΩ can be used instead by connecting the resistor between FSADJ and GND + it controls the scaling of the ranges, and the internal resistor is + automatically disconnected. + minimum: 19000 + maximum: 41000 + default: 20000 + + io-channels: + description: + ADC channel to monitor voltages and currents at the MUX pin. + maxItems: 1 + + '#address-cells': + const: 1 + + '#size-cells': + const: 0 + +patternProperties: + "^channel@[0-4]$": + type: object + additionalProperties: false + + properties: + reg: + description: The channel number representing the DAC output channel. + maximum: 4 + + adi,toggle-mode: + description: + Set the channel as a toggle enabled channel. Toggle operation enables + fast switching of a DAC output between two different DAC codes without + any SPI transaction. + type: boolean + + adi,output-range-microamp: + description: Specify the channel output full scale range. + enum: [3125000, 6250000, 12500000, 25000000, 50000000, 100000000, + 200000000, 300000000] + + required: + - reg + - adi,output-range-microamp + +required: + - compatible + - reg + - spi-max-frequency + - vcc-supply + - iovcc-supply + - v-neg-supply + +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +additionalProperties: false + +examples: + - | + spi { + #address-cells = <1>; + #size-cells = <0>; + dac@0 { + compatible = "adi,ltc2672"; + reg = <0>; + spi-max-frequency = <10000000>; + + vcc-supply = <&vcc>; + iovcc-supply = <&vcc>; + ref-supply = <&vref>; + v-neg-supply = <&vneg>; + + io-channels = <&adc 0>; + + #address-cells = <1>; + #size-cells = <0>; + channel@0 { + reg = <0>; + adi,toggle-mode; + adi,output-range-microamp = <3125000>; + }; + + channel@1 { + reg = <1>; + adi,output-range-microamp = <6250000>; + }; + }; + }; +... diff --git a/MAINTAINERS b/MAINTAINERS index 849800d9cbf7..f4a5b5bc8ccc 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -13081,6 +13081,7 @@ L: linux-iio@vger.kernel.org S: Supported W: https://ez.analog.com/linux-software-drivers F: Documentation/devicetree/bindings/iio/dac/adi,ltc2664.yaml +F: Documentation/devicetree/bindings/iio/dac/adi,ltc2672.yaml LTC2688 IIO DAC DRIVER M: Nuno Sá From patchwork Wed Jun 19 06:49:04 2024 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 8bit X-Patchwork-Submitter: "Paller, Kim Seer" X-Patchwork-Id: 13703459 Received: from mx0b-00128a01.pphosted.com (mx0a-00128a01.pphosted.com [148.163.135.77]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.subspace.kernel.org (Postfix) with ESMTPS id 5E2AC71B45; Wed, 19 Jun 2024 06:50:11 +0000 (UTC) Authentication-Results: smtp.subspace.kernel.org; arc=none smtp.client-ip=148.163.135.77 ARC-Seal: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1718779813; cv=none; b=Re1/f3oTHwgoeO5KI/6f9yWcoSaSGJqY1FNwxTUTnCnZkrP/27siCU6MFHTwy0WH9+KTqIzjzfkf7cZkeI7tP4fj/pC6iyX2SAp7sW3l8KJe9A6enEEwq1XlbA9wsvkjpSKvssV1o/3eqrY0mcwreBmGLp0EI5Jo4ilhU4nQ69A= ARC-Message-Signature: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1718779813; c=relaxed/simple; bh=sOinQ2LIdfxozNRS9YXUni4GLk5guzpmbApMeojUfgY=; h=From:To:CC:Subject:Date:Message-ID:In-Reply-To:References: MIME-Version:Content-Type; b=jkOwPLWmd765/lwzTFZYnQGAzleXF8/O5huqbZGBjmPktRZy1x/amiThCnfbnyj5LRBQCcR1njP2Pq6LMuacZu0MkSo5ueeQ9clhron16vwm7sq7fBISpHdB278GVZa/aoMLGeZ4nQJ8tKitdyviMtw7bJfs/U7rAUChPTyMbMc= ARC-Authentication-Results: i=1; smtp.subspace.kernel.org; dmarc=pass (p=none dis=none) header.from=analog.com; spf=pass smtp.mailfrom=analog.com; dkim=pass (2048-bit key) header.d=analog.com header.i=@analog.com header.b=mRep46lk; arc=none smtp.client-ip=148.163.135.77 Authentication-Results: smtp.subspace.kernel.org; dmarc=pass (p=none dis=none) header.from=analog.com Authentication-Results: smtp.subspace.kernel.org; spf=pass smtp.mailfrom=analog.com Authentication-Results: smtp.subspace.kernel.org; dkim=pass (2048-bit key) header.d=analog.com header.i=@analog.com header.b="mRep46lk" Received: from pps.filterd (m0375855.ppops.net [127.0.0.1]) by mx0b-00128a01.pphosted.com (8.18.1.2/8.18.1.2) with ESMTP id 45J6eDc9001226; Wed, 19 Jun 2024 02:49:56 -0400 DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=analog.com; h=cc :content-transfer-encoding:content-type:date:from:in-reply-to :message-id:mime-version:references:subject:to; s=DKIM; bh=Q6gvl TONnCZm/kPIGI2IOmOBRh9j3geXAlVq7jpK73w=; b=mRep46lkFrve1vczAouQ5 0qasOwbfX+LOqtZqHdwALbdUbkIM8O8aOJoQ/EBMaxFty8LgL/DhdJLs1EvlSHUR d/X36gflECLFMGkPN1D22cKmTSd0agCEcV9tolWPN6+tXgnIyodWYWbprzQTIBT8 398Z1i4z1jxf/wwilEC8ES2+34epQENNkTZSQUlptuS4hncw8g9lL2tCay6QeK2C x8G/wfhseatQZNUfRZ5oyt8RPXFg8fjPCWzSNZJgJXFwJ12xMJJy97IoVxN4zXEn 82QxwrmCah0ylwR5m1axtdhNp7TR2qkf7PBYJJNE6TKMUf4vztkE9kOlCkb+o3yy Q== Received: from nwd2mta4.analog.com ([137.71.173.58]) by mx0b-00128a01.pphosted.com (PPS) with ESMTPS id 3yut9280uu-1 (version=TLSv1.2 cipher=ECDHE-RSA-AES256-GCM-SHA384 bits=256 verify=NOT); Wed, 19 Jun 2024 02:49:55 -0400 (EDT) Received: from ASHBMBX8.ad.analog.com (ASHBMBX8.ad.analog.com [10.64.17.5]) by nwd2mta4.analog.com (8.14.7/8.14.7) with ESMTP id 45J6nr3a038945 (version=TLSv1/SSLv3 cipher=ECDHE-RSA-AES256-GCM-SHA384 bits=256 verify=FAIL); Wed, 19 Jun 2024 02:49:54 -0400 Received: from ASHBCASHYB4.ad.analog.com (10.64.17.132) by ASHBMBX8.ad.analog.com (10.64.17.5) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384) id 15.2.986.14; Wed, 19 Jun 2024 02:49:52 -0400 Received: from ASHBMBX8.ad.analog.com (10.64.17.5) by ASHBCASHYB4.ad.analog.com (10.64.17.132) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384) id 15.2.986.14; Wed, 19 Jun 2024 02:49:52 -0400 Received: from zeus.spd.analog.com (10.66.68.11) by ashbmbx8.ad.analog.com (10.64.17.5) with Microsoft SMTP Server id 15.2.986.14 via Frontend Transport; Wed, 19 Jun 2024 02:49:52 -0400 Received: from kim-VirtualBox.ad.analog.com (KPALLER2-L03.ad.analog.com [10.117.220.25]) by zeus.spd.analog.com (8.15.1/8.15.1) with ESMTP id 45J6nEvj011796; Wed, 19 Jun 2024 02:49:43 -0400 From: Kim Seer Paller To: , , CC: Jonathan Cameron , David Lechner , Lars-Peter Clausen , Liam Girdwood , Mark Brown , Dimitri Fedrau , Krzysztof Kozlowski , "Rob Herring" , Conor Dooley , "Michael Hennerich" , =?utf-8?q?Nuno_S=C3=A1?= , Kim Seer Paller Subject: [PATCH v4 5/5] iio: dac: ltc2664: Add driver for LTC2664 and LTC2672 Date: Wed, 19 Jun 2024 14:49:04 +0800 Message-ID: <20240619064904.73832-6-kimseer.paller@analog.com> X-Mailer: git-send-email 2.34.1 In-Reply-To: <20240619064904.73832-1-kimseer.paller@analog.com> References: <20240619064904.73832-1-kimseer.paller@analog.com> Precedence: bulk X-Mailing-List: linux-iio@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 X-ADIRuleOP-NewSCL: Rule Triggered X-Proofpoint-GUID: G0ajBeVD3Qg-3AryJMGhae9w_Bn9ylEC X-Proofpoint-ORIG-GUID: G0ajBeVD3Qg-3AryJMGhae9w_Bn9ylEC X-Proofpoint-Virus-Version: vendor=baseguard engine=ICAP:2.0.293,Aquarius:18.0.1039,Hydra:6.0.680,FMLib:17.12.28.16 definitions=2024-06-19_02,2024-06-17_01,2024-05-17_01 X-Proofpoint-Spam-Details: rule=outbound_notspam policy=outbound score=0 bulkscore=0 priorityscore=1501 phishscore=0 lowpriorityscore=0 mlxlogscore=999 adultscore=0 clxscore=1015 suspectscore=0 impostorscore=0 malwarescore=0 mlxscore=0 spamscore=0 classifier=spam adjust=0 reason=mlx scancount=1 engine=8.19.0-2405170001 definitions=main-2406190049 LTC2664 4 channel, 12-/16-Bit Voltage Output SoftSpan DAC LTC2672 5 channel, 12-/16-Bit Current Output Softspan DAC Co-developed-by: Michael Hennerich Signed-off-by: Michael Hennerich Signed-off-by: Kim Seer Paller Reviewed-by: Nuno Sa --- MAINTAINERS | 1 + drivers/iio/dac/Kconfig | 11 + drivers/iio/dac/Makefile | 1 + drivers/iio/dac/ltc2664.c | 755 ++++++++++++++++++++++++++++++++++++++ 4 files changed, 768 insertions(+) create mode 100644 drivers/iio/dac/ltc2664.c diff --git a/MAINTAINERS b/MAINTAINERS index f4a5b5bc8ccc..7a02d9a196fb 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -13082,6 +13082,7 @@ S: Supported W: https://ez.analog.com/linux-software-drivers F: Documentation/devicetree/bindings/iio/dac/adi,ltc2664.yaml F: Documentation/devicetree/bindings/iio/dac/adi,ltc2672.yaml +F: drivers/iio/dac/ltc2664.c LTC2688 IIO DAC DRIVER M: Nuno Sá diff --git a/drivers/iio/dac/Kconfig b/drivers/iio/dac/Kconfig index fb48dddbcc20..3a7691db3998 100644 --- a/drivers/iio/dac/Kconfig +++ b/drivers/iio/dac/Kconfig @@ -371,6 +371,17 @@ config LTC2632 To compile this driver as a module, choose M here: the module will be called ltc2632. +config LTC2664 + tristate "Analog Devices LTC2664 and LTC2672 DAC SPI driver" + depends on SPI + select REGMAP + help + Say yes here to build support for Analog Devices + LTC2664 and LTC2672 converters (DAC). + + To compile this driver as a module, choose M here: the + module will be called ltc2664. + config M62332 tristate "Mitsubishi M62332 DAC driver" depends on I2C diff --git a/drivers/iio/dac/Makefile b/drivers/iio/dac/Makefile index 8432a81a19dc..2cf148f16306 100644 --- a/drivers/iio/dac/Makefile +++ b/drivers/iio/dac/Makefile @@ -37,6 +37,7 @@ obj-$(CONFIG_DS4424) += ds4424.o obj-$(CONFIG_LPC18XX_DAC) += lpc18xx_dac.o obj-$(CONFIG_LTC1660) += ltc1660.o obj-$(CONFIG_LTC2632) += ltc2632.o +obj-$(CONFIG_LTC2664) += ltc2664.o obj-$(CONFIG_LTC2688) += ltc2688.o obj-$(CONFIG_M62332) += m62332.o obj-$(CONFIG_MAX517) += max517.o diff --git a/drivers/iio/dac/ltc2664.c b/drivers/iio/dac/ltc2664.c new file mode 100644 index 000000000000..9b73b9c6a7a7 --- /dev/null +++ b/drivers/iio/dac/ltc2664.c @@ -0,0 +1,755 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * LTC2664 4 channel, 12-/16-Bit Voltage Output SoftSpan DAC driver + * LTC2672 5 channel, 12-/16-Bit Current Output Softspan DAC driver + * + * Copyright 2024 Analog Devices Inc. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define LTC2664_CMD_WRITE_N(n) (0x00 + (n)) +#define LTC2664_CMD_UPDATE_N(n) (0x10 + (n)) +#define LTC2664_CMD_WRITE_N_UPDATE_ALL 0x20 +#define LTC2664_CMD_WRITE_N_UPDATE_N(n) (0x30 + (n)) +#define LTC2664_CMD_POWER_DOWN_N(n) (0x40 + (n)) +#define LTC2664_CMD_POWER_DOWN_ALL 0x50 +#define LTC2664_CMD_SPAN_N(n) (0x60 + (n)) +#define LTC2664_CMD_CONFIG 0x70 +#define LTC2664_CMD_MUX 0xB0 +#define LTC2664_CMD_TOGGLE_SEL 0xC0 +#define LTC2664_CMD_GLOBAL_TOGGLE 0xD0 +#define LTC2664_CMD_NO_OPERATION 0xF0 +#define LTC2664_REF_DISABLE 0x0001 +#define LTC2664_MSPAN_SOFTSPAN 7 + +#define LTC2672_MAX_CHANNEL 5 +#define LTC2672_MAX_SPAN 7 +#define LTC2672_SCALE_MULTIPLIER(n) (50 * BIT(n)) + +enum ltc2664_ids { + LTC2664, + LTC2672, +}; + +enum { + LTC2664_SPAN_RANGE_0V_5V, + LTC2664_SPAN_RANGE_0V_10V, + LTC2664_SPAN_RANGE_M5V_5V, + LTC2664_SPAN_RANGE_M10V_10V, + LTC2664_SPAN_RANGE_M2V5_2V5, +}; + +enum { + LTC2664_INPUT_A, + LTC2664_INPUT_B, + LTC2664_INPUT_B_AVAIL, + LTC2664_POWERDOWN, + LTC2664_POWERDOWN_MODE, + LTC2664_TOGGLE_EN, + LTC2664_GLOBAL_TOGGLE, +}; + +static const u16 ltc2664_mspan_lut[8][2] = { + { LTC2664_SPAN_RANGE_M10V_10V, 32768 }, /* MPS2=0, MPS1=0, MSP0=0 (0)*/ + { LTC2664_SPAN_RANGE_M5V_5V, 32768 }, /* MPS2=0, MPS1=0, MSP0=1 (1)*/ + { LTC2664_SPAN_RANGE_M2V5_2V5, 32768 }, /* MPS2=0, MPS1=1, MSP0=0 (2)*/ + { LTC2664_SPAN_RANGE_0V_10V, 0 }, /* MPS2=0, MPS1=1, MSP0=1 (3)*/ + { LTC2664_SPAN_RANGE_0V_10V, 32768 }, /* MPS2=1, MPS1=0, MSP0=0 (4)*/ + { LTC2664_SPAN_RANGE_0V_5V, 0 }, /* MPS2=1, MPS1=0, MSP0=1 (5)*/ + { LTC2664_SPAN_RANGE_0V_5V, 32768 }, /* MPS2=1, MPS1=1, MSP0=0 (6)*/ + { LTC2664_SPAN_RANGE_0V_5V, 0 } /* MPS2=1, MPS1=1, MSP0=1 (7)*/ +}; + +struct ltc2664_state; + +struct ltc2664_chip_info { + enum ltc2664_ids id; + const char *name; + int (*scale_get)(const struct ltc2664_state *st, int c); + int (*offset_get)(const struct ltc2664_state *st, int c); + int measurement_type; + unsigned int num_channels; + const struct iio_chan_spec *iio_chan; + const int (*span_helper)[2]; + unsigned int num_span; + unsigned int internal_vref_mv; + bool manual_span_support; + bool rfsadj_support; +}; + +struct ltc2664_chan { + /* indicates if the channel should be toggled */ + bool toggle_chan; + /* indicates if the channel is in powered down state */ + bool powerdown; + /* span code of the channel */ + u8 span; + /* raw data of the current state of the chip registers (A/B) */ + u16 raw[2]; +}; + +struct ltc2664_state { + struct spi_device *spi; + struct regmap *regmap; + struct ltc2664_chan channels[LTC2672_MAX_CHANNEL]; + /* lock to protect against multiple access to the device and shared data */ + struct mutex lock; + const struct ltc2664_chip_info *chip_info; + struct iio_chan_spec *iio_channels; + int vref_mv; + u32 rfsadj_ohms; + u32 toggle_sel; + bool global_toggle; +}; + +static const int ltc2664_span_helper[][2] = { + { 0, 5000 }, + { 0, 10000 }, + { -5000, 5000 }, + { -10000, 10000 }, + { -2500, 2500 }, +}; + +static const int ltc2672_span_helper[][2] = { + { 0, 0 }, + { 0, 3125 }, + { 0, 6250 }, + { 0, 12500 }, + { 0, 25000 }, + { 0, 50000 }, + { 0, 100000 }, + { 0, 200000 }, + { 0, 300000 }, +}; + +static int ltc2664_scale_get(const struct ltc2664_state *st, int c) +{ + const struct ltc2664_chan *chan = &st->channels[c]; + const int (*span_helper)[2] = st->chip_info->span_helper; + int span, fs; + + span = chan->span; + if (span < 0) + return span; + + fs = span_helper[span][1] - span_helper[span][0]; + + return fs * st->vref_mv / 2500; +} + +static int ltc2672_scale_get(const struct ltc2664_state *st, int c) +{ + const struct ltc2664_chan *chan = &st->channels[c]; + int span, fs; + + span = chan->span - 1; + if (span < 0) + return span; + + fs = 1000 * st->vref_mv; + + if (span == LTC2672_MAX_SPAN) + return mul_u64_u32_div(4800, fs, st->rfsadj_ohms); + + return mul_u64_u32_div(LTC2672_SCALE_MULTIPLIER(span), fs, st->rfsadj_ohms); +} + +static int ltc2664_offset_get(const struct ltc2664_state *st, int c) +{ + const struct ltc2664_chan *chan = &st->channels[c]; + int span; + + span = chan->span; + if (span < 0) + return span; + + if (st->chip_info->span_helper[span][0] < 0) + return -32768; + + return 0; +} + +static int ltc2664_dac_code_write(struct ltc2664_state *st, u32 chan, u32 input, + u16 code) +{ + struct ltc2664_chan *c = &st->channels[chan]; + int ret, reg; + + guard(mutex)(&st->lock); + /* select the correct input register to write to */ + if (c->toggle_chan) { + ret = regmap_write(st->regmap, LTC2664_CMD_TOGGLE_SEL, + input << chan); + if (ret) + return ret; + } + /* + * If in toggle mode the dac should be updated by an + * external signal (or sw toggle) and not here. + */ + if (st->toggle_sel & BIT(chan)) + reg = LTC2664_CMD_WRITE_N(chan); + else + reg = LTC2664_CMD_WRITE_N_UPDATE_N(chan); + + ret = regmap_write(st->regmap, reg, code); + if (ret) + return ret; + + c->raw[input] = code; + + if (c->toggle_chan) { + ret = regmap_write(st->regmap, LTC2664_CMD_TOGGLE_SEL, + st->toggle_sel); + if (ret) + return ret; + } + + return 0; +} + +static int ltc2664_dac_code_read(struct ltc2664_state *st, u32 chan, u32 input, + u32 *code) +{ + guard(mutex)(&st->lock); + *code = st->channels[chan].raw[input]; + + return 0; +} + +static const int ltc2664_raw_range[] = { 0, 1, U16_MAX }; + +static int ltc2664_read_avail(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + const int **vals, int *type, int *length, + long info) +{ + switch (info) { + case IIO_CHAN_INFO_RAW: + *vals = ltc2664_raw_range; + *type = IIO_VAL_INT; + + return IIO_AVAIL_RANGE; + default: + return -EINVAL; + } +} + +static int ltc2664_read_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, int *val, + int *val2, long info) +{ + struct ltc2664_state *st = iio_priv(indio_dev); + int ret; + + switch (info) { + case IIO_CHAN_INFO_RAW: + ret = ltc2664_dac_code_read(st, chan->channel, + LTC2664_INPUT_A, val); + if (ret) + return ret; + + return IIO_VAL_INT; + case IIO_CHAN_INFO_OFFSET: + *val = st->chip_info->offset_get(st, chan->channel); + + return IIO_VAL_INT; + case IIO_CHAN_INFO_SCALE: + *val = st->chip_info->scale_get(st, chan->channel); + + *val2 = 16; + return IIO_VAL_FRACTIONAL_LOG2; + default: + return -EINVAL; + } +} + +static int ltc2664_write_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, int val, + int val2, long info) +{ + struct ltc2664_state *st = iio_priv(indio_dev); + + switch (info) { + case IIO_CHAN_INFO_RAW: + if (val > U16_MAX || val < 0) + return -EINVAL; + + return ltc2664_dac_code_write(st, chan->channel, + LTC2664_INPUT_A, val); + default: + return -EINVAL; + } +} + +static ssize_t ltc2664_reg_bool_get(struct iio_dev *indio_dev, + uintptr_t private, + const struct iio_chan_spec *chan, + char *buf) +{ + struct ltc2664_state *st = iio_priv(indio_dev); + u32 val; + + guard(mutex)(&st->lock); + switch (private) { + case LTC2664_POWERDOWN: + val = st->channels[chan->channel].powerdown; + + return sysfs_emit(buf, "%u\n", val); + case LTC2664_POWERDOWN_MODE: + return sysfs_emit(buf, "42kohm_to_gnd\n"); + case LTC2664_TOGGLE_EN: + val = !!(st->toggle_sel & BIT(chan->channel)); + + return sysfs_emit(buf, "%u\n", val); + case LTC2664_GLOBAL_TOGGLE: + val = st->global_toggle; + + return sysfs_emit(buf, "%u\n", val); + default: + return -EINVAL; + } +} + +static ssize_t ltc2664_reg_bool_set(struct iio_dev *indio_dev, + uintptr_t private, + const struct iio_chan_spec *chan, + const char *buf, size_t len) +{ + struct ltc2664_state *st = iio_priv(indio_dev); + int ret; + bool en; + + ret = kstrtobool(buf, &en); + if (ret) + return ret; + + guard(mutex)(&st->lock); + switch (private) { + case LTC2664_POWERDOWN: + ret = regmap_write(st->regmap, + en ? LTC2664_CMD_POWER_DOWN_N(chan->channel) : + LTC2664_CMD_UPDATE_N(chan->channel), en); + if (ret) + return ret; + + st->channels[chan->channel].powerdown = en; + + return len; + case LTC2664_TOGGLE_EN: + if (en) + st->toggle_sel |= BIT(chan->channel); + else + st->toggle_sel &= ~BIT(chan->channel); + + ret = regmap_write(st->regmap, LTC2664_CMD_TOGGLE_SEL, + st->toggle_sel); + if (ret) + return ret; + + return len; + case LTC2664_GLOBAL_TOGGLE: + ret = regmap_write(st->regmap, LTC2664_CMD_GLOBAL_TOGGLE, en); + if (ret) + return ret; + + st->global_toggle = en; + + return len; + default: + return -EINVAL; + } +} + +static ssize_t ltc2664_dac_input_read(struct iio_dev *indio_dev, + uintptr_t private, + const struct iio_chan_spec *chan, + char *buf) +{ + struct ltc2664_state *st = iio_priv(indio_dev); + int ret; + u32 val; + + if (private == LTC2664_INPUT_B_AVAIL) + return sysfs_emit(buf, "[%u %u %u]\n", ltc2664_raw_range[0], + ltc2664_raw_range[1], + ltc2664_raw_range[2] / 4); + + ret = ltc2664_dac_code_read(st, chan->channel, private, &val); + if (ret) + return ret; + + return sysfs_emit(buf, "%u\n", val); +} + +static ssize_t ltc2664_dac_input_write(struct iio_dev *indio_dev, + uintptr_t private, + const struct iio_chan_spec *chan, + const char *buf, size_t len) +{ + struct ltc2664_state *st = iio_priv(indio_dev); + int ret; + u16 val; + + if (private == LTC2664_INPUT_B_AVAIL) + return -EINVAL; + + ret = kstrtou16(buf, 10, &val); + if (ret) + return ret; + + ret = ltc2664_dac_code_write(st, chan->channel, private, val); + if (ret) + return ret; + + return len; +} + +static int ltc2664_reg_access(struct iio_dev *indio_dev, + unsigned int reg, + unsigned int writeval, + unsigned int *readval) +{ + struct ltc2664_state *st = iio_priv(indio_dev); + + if (readval) + return -EOPNOTSUPP; + + return regmap_write(st->regmap, reg, writeval); +} + +#define LTC2664_CHAN_EXT_INFO(_name, _what, _shared, _read, _write) { \ + .name = _name, \ + .read = (_read), \ + .write = (_write), \ + .private = (_what), \ + .shared = (_shared), \ +} + +/* + * For toggle mode we only expose the symbol attr (sw_toggle) in case a TGPx is + * not provided in dts. + */ +static const struct iio_chan_spec_ext_info ltc2664_toggle_sym_ext_info[] = { + LTC2664_CHAN_EXT_INFO("raw0", LTC2664_INPUT_A, IIO_SEPARATE, + ltc2664_dac_input_read, ltc2664_dac_input_write), + LTC2664_CHAN_EXT_INFO("raw1", LTC2664_INPUT_B, IIO_SEPARATE, + ltc2664_dac_input_read, ltc2664_dac_input_write), + LTC2664_CHAN_EXT_INFO("powerdown", LTC2664_POWERDOWN, IIO_SEPARATE, + ltc2664_reg_bool_get, ltc2664_reg_bool_set), + LTC2664_CHAN_EXT_INFO("powerdown_mode", LTC2664_POWERDOWN_MODE, + IIO_SEPARATE, ltc2664_reg_bool_get, NULL), + LTC2664_CHAN_EXT_INFO("symbol", LTC2664_GLOBAL_TOGGLE, IIO_SEPARATE, + ltc2664_reg_bool_get, ltc2664_reg_bool_set), + LTC2664_CHAN_EXT_INFO("toggle_en", LTC2664_TOGGLE_EN, + IIO_SEPARATE, ltc2664_reg_bool_get, + ltc2664_reg_bool_set), + { } +}; + +static const struct iio_chan_spec_ext_info ltc2664_ext_info[] = { + LTC2664_CHAN_EXT_INFO("powerdown", LTC2664_POWERDOWN, IIO_SEPARATE, + ltc2664_reg_bool_get, ltc2664_reg_bool_set), + LTC2664_CHAN_EXT_INFO("powerdown_mode", LTC2664_POWERDOWN_MODE, + IIO_SEPARATE, ltc2664_reg_bool_get, NULL), + { } +}; + +static const struct iio_chan_spec ltc2664_channel_template = { + .indexed = 1, + .output = 1, + .info_mask_separate = BIT(IIO_CHAN_INFO_SCALE) | + BIT(IIO_CHAN_INFO_OFFSET) | + BIT(IIO_CHAN_INFO_RAW), + .info_mask_separate_available = BIT(IIO_CHAN_INFO_RAW), + .ext_info = ltc2664_ext_info, +}; + +static const struct ltc2664_chip_info ltc2664_chip = { + .name = "ltc2664", + .scale_get = ltc2664_scale_get, + .offset_get = ltc2664_offset_get, + .measurement_type = IIO_VOLTAGE, + .num_channels = 4, + .span_helper = ltc2664_span_helper, + .num_span = ARRAY_SIZE(ltc2664_span_helper), + .internal_vref_mv = 2500, + .manual_span_support = true, + .rfsadj_support = false, +}; + +static const struct ltc2664_chip_info ltc2672_chip = { + .name = "ltc2672", + .scale_get = ltc2672_scale_get, + .offset_get = ltc2664_offset_get, + .measurement_type = IIO_CURRENT, + .num_channels = 5, + .span_helper = ltc2672_span_helper, + .num_span = ARRAY_SIZE(ltc2672_span_helper), + .internal_vref_mv = 1250, + .manual_span_support = false, + .rfsadj_support = true, +}; + +static int ltc2664_set_span(const struct ltc2664_state *st, int min, int max, + int chan) +{ + const struct ltc2664_chip_info *chip_info = st->chip_info; + const int (*span_helper)[2] = chip_info->span_helper; + int span, ret; + + for (span = 0; span < chip_info->num_span; span++) { + if (min == span_helper[span][0] && max == span_helper[span][1]) + break; + } + + if (span == chip_info->num_span) + return -EINVAL; + + ret = regmap_write(st->regmap, LTC2664_CMD_SPAN_N(chan), span); + if (ret) + return ret; + + return span; +} + +static int ltc2664_channel_config(struct ltc2664_state *st) +{ + const struct ltc2664_chip_info *chip_info = st->chip_info; + struct device *dev = &st->spi->dev; + u32 reg, tmp[2], mspan; + int ret, span = 0; + + mspan = LTC2664_MSPAN_SOFTSPAN; + ret = device_property_read_u32(dev, "adi,manual-span-operation-config", + &mspan); + if (!ret) { + if (!chip_info->manual_span_support) + return dev_err_probe(dev, -EINVAL, + "adi,manual-span-operation-config not supported\n"); + + if (mspan > ARRAY_SIZE(ltc2664_mspan_lut)) + return dev_err_probe(dev, -EINVAL, + "adi,manual-span-operation-config not in range\n"); + } + + st->rfsadj_ohms = 20000; + ret = device_property_read_u32(dev, "adi,rfsadj-ohms", &st->rfsadj_ohms); + if (!ret) { + if (!chip_info->rfsadj_support) + return dev_err_probe(dev, -EINVAL, + "adi,rfsadj-ohms not supported\n"); + + if (st->rfsadj_ohms < 19000 || st->rfsadj_ohms > 41000) + return dev_err_probe(dev, -EINVAL, + "adi,rfsadj-ohms not in range\n"); + } + + device_for_each_child_node_scoped(dev, child) { + struct ltc2664_chan *chan; + + ret = fwnode_property_read_u32(child, "reg", ®); + if (ret) + return dev_err_probe(dev, ret, + "Failed to get reg property\n"); + + if (reg >= chip_info->num_channels) + return dev_err_probe(dev, -EINVAL, + "reg bigger than: %d\n", + chip_info->num_channels); + + chan = &st->channels[reg]; + + if (fwnode_property_read_bool(child, "adi,toggle-mode")) { + chan->toggle_chan = true; + /* assume sw toggle ABI */ + st->iio_channels[reg].ext_info = ltc2664_toggle_sym_ext_info; + + /* + * Clear IIO_CHAN_INFO_RAW bit as toggle channels expose + * out_voltage/current_raw{0|1} files. + */ + __clear_bit(IIO_CHAN_INFO_RAW, + &st->iio_channels[reg].info_mask_separate); + } + + chan->raw[0] = ltc2664_mspan_lut[mspan][1]; + chan->raw[1] = ltc2664_mspan_lut[mspan][1]; + + chan->span = ltc2664_mspan_lut[mspan][0]; + + ret = fwnode_property_read_u32_array(child, "adi,output-range-microvolt", + tmp, ARRAY_SIZE(tmp)); + if (!ret && mspan == LTC2664_MSPAN_SOFTSPAN) { + chan->span = ltc2664_set_span(st, tmp[0] / 1000, + tmp[1] / 1000, reg); + if (span < 0) + return dev_err_probe(dev, span, + "Failed to set span\n"); + + } + + ret = fwnode_property_read_u32(child, + "adi,output-range-microamp", + &tmp[0]); + if (!ret) { + chan->span = ltc2664_set_span(st, 0, tmp[0] / 1000, reg); + if (span < 0) + return dev_err_probe(dev, span, + "Failed to set span\n"); + } + } + + return 0; +} + +static int ltc2664_setup(struct ltc2664_state *st) +{ + const struct ltc2664_chip_info *chip_info = st->chip_info; + struct gpio_desc *gpio; + int ret, i; + + /* If we have a clr/reset pin, use that to reset the chip. */ + gpio = devm_gpiod_get_optional(&st->spi->dev, "reset", GPIOD_OUT_HIGH); + if (IS_ERR(gpio)) + return dev_err_probe(&st->spi->dev, PTR_ERR(gpio), + "Failed to get reset gpio"); + if (gpio) { + fsleep(1000); + gpiod_set_value_cansleep(gpio, 0); + } + + /* + * Duplicate the default channel configuration as it can change during + * @ltc2664_channel_config() + */ + st->iio_channels = devm_kcalloc(&st->spi->dev, + chip_info->num_channels, + sizeof(struct iio_chan_spec), + GFP_KERNEL); + if (!st->iio_channels) + return -ENOMEM; + + for (i = 0; i < chip_info->num_channels; i++) { + st->iio_channels[i] = ltc2664_channel_template; + st->iio_channels[i].type = chip_info->measurement_type; + st->iio_channels[i].channel = i; + } + + ret = ltc2664_channel_config(st); + if (ret) + return ret; + + return regmap_set_bits(st->regmap, LTC2664_CMD_CONFIG, LTC2664_REF_DISABLE); +} + +static const struct regmap_config ltc2664_regmap_config = { + .reg_bits = 8, + .val_bits = 16, + .max_register = LTC2664_CMD_NO_OPERATION, +}; + +static const struct iio_info ltc2664_info = { + .write_raw = ltc2664_write_raw, + .read_raw = ltc2664_read_raw, + .read_avail = ltc2664_read_avail, + .debugfs_reg_access = ltc2664_reg_access, +}; + +static int ltc2664_probe(struct spi_device *spi) +{ + static const char * const regulators[] = { "vcc", "iovcc", "v-neg" }; + const struct ltc2664_chip_info *chip_info; + struct device *dev = &spi->dev; + struct iio_dev *indio_dev; + struct ltc2664_state *st; + int ret; + + indio_dev = devm_iio_device_alloc(dev, sizeof(*st)); + if (!indio_dev) + return -ENOMEM; + + st = iio_priv(indio_dev); + st->spi = spi; + + chip_info = spi_get_device_match_data(spi); + if (!chip_info) + return -ENODEV; + + st->chip_info = chip_info; + + mutex_init(&st->lock); + + st->regmap = devm_regmap_init_spi(spi, <c2664_regmap_config); + if (IS_ERR(st->regmap)) + return dev_err_probe(dev, PTR_ERR(st->regmap), + "Failed to init regmap"); + + ret = devm_regulator_bulk_get_enable(dev, ARRAY_SIZE(regulators), + regulators); + if (ret) + return dev_err_probe(dev, ret, "Failed to enable regulators\n"); + + ret = devm_regulator_get_enable_read_voltage(dev, "ref"); + if (ret < 0) + return dev_err_probe(dev, ret, "Failed to get vref voltage\n"); + else if (ret == -ENODEV) + st->vref_mv = chip_info->internal_vref_mv; + else + st->vref_mv = ret / 1000; + + ret = ltc2664_setup(st); + if (ret) + return ret; + + indio_dev->name = chip_info->name; + indio_dev->info = <c2664_info; + indio_dev->modes = INDIO_DIRECT_MODE; + indio_dev->channels = st->iio_channels; + indio_dev->num_channels = chip_info->num_channels; + + return devm_iio_device_register(dev, indio_dev); +} + +static const struct spi_device_id ltc2664_id[] = { + { "ltc2664", (kernel_ulong_t)<c2664_chip }, + { "ltc2672", (kernel_ulong_t)<c2672_chip }, + { } +}; +MODULE_DEVICE_TABLE(spi, ltc2664_id); + +static const struct of_device_id ltc2664_of_id[] = { + { .compatible = "adi,ltc2664", .data = <c2664_chip }, + { .compatible = "adi,ltc2672", .data = <c2672_chip }, + { } +}; +MODULE_DEVICE_TABLE(of, ltc2664_of_id); + +static struct spi_driver ltc2664_driver = { + .driver = { + .name = "ltc2664", + .of_match_table = ltc2664_of_id, + }, + .probe = ltc2664_probe, + .id_table = ltc2664_id, +}; +module_spi_driver(ltc2664_driver); + +MODULE_AUTHOR("Michael Hennerich "); +MODULE_AUTHOR("Kim Seer Paller "); +MODULE_DESCRIPTION("Analog Devices LTC2664 and LTC2672 DAC"); +MODULE_LICENSE("GPL");