From patchwork Fri Aug 9 18:41:08 2024 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 8bit X-Patchwork-Submitter: Trevor Gamblin X-Patchwork-Id: 13759094 Received: from mail-qt1-f176.google.com (mail-qt1-f176.google.com [209.85.160.176]) (using TLSv1.2 with cipher ECDHE-RSA-AES128-GCM-SHA256 (128/128 bits)) (No client certificate requested) by smtp.subspace.kernel.org (Postfix) with ESMTPS id D34991591E2 for ; Fri, 9 Aug 2024 18:41:17 +0000 (UTC) Authentication-Results: smtp.subspace.kernel.org; arc=none smtp.client-ip=209.85.160.176 ARC-Seal: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1723228879; cv=none; b=n7SGjTyJ436ikHFl2yVfUimeV6WeHnEUMkPq66efCaSlsSgf0klfc6POOdxjtG45UJ/HvEsSCCD38ejJwRC+6QngGi4DkFpo0tmdDM7dc1DPY7nfJhvB1Jybe/R0EWxbHk4RpZFi6O0iUT8YHOq5/+2uosOiocVF7ritsWdQ/xw= ARC-Message-Signature: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1723228879; c=relaxed/simple; bh=la6GSpQ2MOFizv9wiIf/4WUJBySqR8xKNVQYNv704wc=; h=From:Date:Subject:MIME-Version:Content-Type:Message-Id:References: In-Reply-To:To:Cc; b=lm9wv72J0HHPU5N32n49IPCV4Zq+cl5IUSI+Aoyvo9A7cAFgWZ9Uo5WxUj8JD5Mrs3ozIjOZGlUObnOIlByY6Cvx/XaOr1kAqYLIwxeEu19VErkVnFEGaVUr565ooMJ+5oopt1WXBVE6GrsoQ40FpJA8WKSz9XMo+kvdMylx/XI= ARC-Authentication-Results: i=1; smtp.subspace.kernel.org; dmarc=none (p=none dis=none) header.from=baylibre.com; spf=pass smtp.mailfrom=baylibre.com; dkim=pass (2048-bit key) header.d=baylibre-com.20230601.gappssmtp.com header.i=@baylibre-com.20230601.gappssmtp.com header.b=nw0hfDJC; arc=none smtp.client-ip=209.85.160.176 Authentication-Results: smtp.subspace.kernel.org; dmarc=none (p=none dis=none) header.from=baylibre.com Authentication-Results: smtp.subspace.kernel.org; spf=pass smtp.mailfrom=baylibre.com Authentication-Results: smtp.subspace.kernel.org; dkim=pass (2048-bit key) header.d=baylibre-com.20230601.gappssmtp.com header.i=@baylibre-com.20230601.gappssmtp.com header.b="nw0hfDJC" Received: by mail-qt1-f176.google.com with SMTP id d75a77b69052e-44ff99fcd42so12796851cf.0 for ; Fri, 09 Aug 2024 11:41:17 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=baylibre-com.20230601.gappssmtp.com; s=20230601; t=1723228877; x=1723833677; darn=vger.kernel.org; h=cc:to:in-reply-to:references:message-id:content-transfer-encoding :mime-version:subject:date:from:from:to:cc:subject:date:message-id :reply-to; bh=S1bblDUFtr6UOb9/HDv6zHhrOgpYsPDN9jUK9jADrd4=; b=nw0hfDJC37vxG+MOV9V9Zdmka296vCArG4GkWMuaY6Zqr2ibkaQtG40fapIhCIQQ/e 8YcVC+w+mM5SmK3SeDfTV/wult8eVoaglmERrmq8F/uBpYRO4D01TkyWBAHr87vcSLzD TlFQP6dcJ6luN37ztM6XLFgyChI4bpjwjxgkLq6YbcbnM9pSmoCv/sfbqfSmwmkY2nmz Ty3SuwC5qm4hEEW95KD8EgZM0j/UBmZpLv3OjMz1tfkomNf7VG1GFXX7pk78U48r/n0F 7bBjrO5XOgqXHlmhtj2aUKDiGiw8VO004cWXMMilhAtiZ6kZBw/vzZNw3lb3CToyyp1v IgLg== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20230601; t=1723228877; x=1723833677; h=cc:to:in-reply-to:references:message-id:content-transfer-encoding :mime-version:subject:date:from:x-gm-message-state:from:to:cc :subject:date:message-id:reply-to; bh=S1bblDUFtr6UOb9/HDv6zHhrOgpYsPDN9jUK9jADrd4=; b=oQiMLWb6nEjHC15pJqN5/d4gs8FPxPG7+QZy+9q5lUld83cRQgZpguU+WFu5VeP21a A48Hxvv9xE1dUNRnC1HAi7iH0K/cNEJrPf9UGn8aARAEETN9Zrfanb1ljBDMhow2CI7W yxt47XLn5wKSm+pCXcH5suFv7XXyO6mc/LJN2zq6HSDTPbS5frbm8Ob0Nb22c+ekH09M QTNfDUPJzFn/tdiHlUIX8FFbw2ZWI+RIk9ox5OFuM/WqoHlZ4rxI0r7PxLy7BrLmvE8m U5no3aD6a9pCKxhc2p5uZ5lC78Vf/948DAfpgwm5vBjRmBSkTMFqt5Hmbvu7nltCaUzm t5/w== X-Gm-Message-State: AOJu0Yxyiw3w6xWQqYfamHm6pKMz+PcrLUBQ0VTu2iOvOliskYo4/UG6 3diR6c+yZ5S9EGPyKu0ABo5syxdn4RcMqyCpwIu6imb0b0zdahhjK6S2bf7zGAc= X-Google-Smtp-Source: AGHT+IFewIGGG3exnCOpqbH8KmEMNNmpnY4iTeju133LC+0BzLTFB16XV5HsfO1wa1DS06fzTdHfbA== X-Received: by 2002:a05:622a:5809:b0:447:def8:bc8b with SMTP id d75a77b69052e-45312578845mr37513481cf.20.1723228876667; Fri, 09 Aug 2024 11:41:16 -0700 (PDT) Received: from [127.0.1.1] (d24-150-219-207.home.cgocable.net. [24.150.219.207]) by smtp.gmail.com with ESMTPSA id d75a77b69052e-4531c1d723asm370381cf.44.2024.08.09.11.41.15 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Fri, 09 Aug 2024 11:41:16 -0700 (PDT) From: Trevor Gamblin Date: Fri, 09 Aug 2024 14:41:08 -0400 Subject: [PATCH v2 1/3] dt-bindings: iio: adc: add AD762x/AD796x ADCs Precedence: bulk X-Mailing-List: linux-iio@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 Message-Id: <20240809-ad7625_r1-v2-1-f85e7ac83150@baylibre.com> References: <20240809-ad7625_r1-v2-0-f85e7ac83150@baylibre.com> In-Reply-To: <20240809-ad7625_r1-v2-0-f85e7ac83150@baylibre.com> To: Lars-Peter Clausen , Michael Hennerich , =?utf-8?q?Nuno_S=C3=A1?= , Jonathan Cameron , Rob Herring , Krzysztof Kozlowski , Conor Dooley , Jonathan Corbet , David Lechner , Uwe Kleine-Konig Cc: linux-iio@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-doc@vger.kernel.org, Trevor Gamblin X-Mailer: b4 0.14.1 Add a binding specification for the Analog Devices Inc. AD7625, AD7626, AD7960, and AD7961 ADCs. Signed-off-by: Trevor Gamblin --- .../devicetree/bindings/iio/adc/adi,ad7625.yaml | 175 +++++++++++++++++++++ MAINTAINERS | 9 ++ 2 files changed, 184 insertions(+) diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7625.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7625.yaml new file mode 100644 index 000000000000..8192c269dc2f --- /dev/null +++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7625.yaml @@ -0,0 +1,175 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/adc/adi,ad7625.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Analog Devices Fast PulSAR Analog to Digital Converters + +maintainers: + - Michael Hennerich + - Nuno Sá + +description: | + A family of single channel differential analog to digital converters. + + * https://www.analog.com/en/products/ad7625.html + * https://www.analog.com/en/products/ad7626.html + * https://www.analog.com/en/products/ad7960.html + * https://www.analog.com/en/products/ad7961.html + +properties: + compatible: + enum: + - adi,ad7625 + - adi,ad7626 + - adi,ad7960 + - adi,ad7961 + + vdd1-supply: true + vdd2-supply: true + vio-supply: true + + ref-supply: + description: + Voltage regulator for the external reference voltage (REF). + + refin-supply: + description: + Voltage regulator for the reference buffer input (REFIN). + + clocks: + description: + The clock connected to the CLK pins, gated by the clk_gate PWM. + maxItems: 1 + + pwms: + items: + - description: PWM connected to the CNV input on the ADC. + - description: PWM that gates the clock connected to the ADC's CLK input. + + pwm-names: + items: + - const: cnv + - const: clk_gate + + io-backends: + description: + The AXI ADC IP block connected to the D+/- and DCO+/- lines of the + ADC. An example backend can be found at + http://analogdevicesinc.github.io/hdl/projects/pulsar_lvds/index.html. + maxItems: 1 + + adi,no-dco: + $ref: /schemas/types.yaml#/definitions/flag + description: + Indicates the wiring of the DCO+/- lines. If true, then they are + grounded and the device is in self-clocked mode. If this is not + present, then the device is in echoed clock mode. + + adi,en0-always-on: + $ref: /schemas/types.yaml#/definitions/flag + description: + Indicates if EN0 is hard-wired to the high state. If neither this + nor en0-gpios are present, then EN0 is hard-wired low. + + adi,en1-always-on: + $ref: /schemas/types.yaml#/definitions/flag + description: + Indicates if EN1 is hard-wired to the high state. If neither this + nor en1-gpios are present, then EN1 is hard-wired low. + + adi,en2-always-on: + $ref: /schemas/types.yaml#/definitions/flag + description: + Indicates if EN2 is hard-wired to the high state. If neither this + nor en2-gpios are present, then EN2 is hard-wired low. + + adi,en3-always-on: + $ref: /schemas/types.yaml#/definitions/flag + description: + Indicates if EN3 is hard-wired to the high state. If neither this + nor en3-gpios are present, then EN3 is hard-wired low. + + en0-gpios: + description: + Configurable EN0 pin. + + en1-gpios: + description: + Configurable EN1 pin. + + en2-gpios: + description: + Configurable EN2 pin. + + en3-gpios: + description: + Configurable EN3 pin. + +required: + - compatible + - vdd1-supply + - vdd2-supply + - vio-supply + - clocks + - pwms + - pwm-names + - io-backends + +allOf: + - if: + required: + - ref-supply + then: + # refin-supply is not needed if ref-supply is given + properties: + refin-supply: false + - if: + required: + - refin-supply + then: + # ref-supply is not needed if refin-supply is given + properties: + ref-supply: false + - if: + properties: + compatible: + contains: + enum: + - adi,ad7625 + - adi,ad7626 + then: + properties: + en2-gpios: false + en3-gpios: false + adi,en2-always-on: false + adi,en3-always-on: false + + - if: + properties: + compatible: + contains: + enum: + - adi,ad7960 + - adi,ad7961 + then: + # ad796x parts must have one of the two supplies + oneOf: + - required: [ref-supply] + - required: [refin-supply] + +additionalProperties: false + +examples: + - | + adc { + compatible = "adi,ad7625"; + vdd1-supply = <&supply_5V>; + vdd2-supply = <&supply_2_5V>; + vio-supply = <&supply_2_5V>; + io-backends = <&axi_adc>; + clocks = <&ref_clk>; + pwms = <&axi_pwm_gen 0 0>, <&axi_pwm_gen 1 0>; + pwm-names = "cnv", "clk_gate"; + }; diff --git a/MAINTAINERS b/MAINTAINERS index 42decde38320..2361f92751dd 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -1260,6 +1260,15 @@ F: Documentation/devicetree/bindings/iio/addac/adi,ad74413r.yaml F: drivers/iio/addac/ad74413r.c F: include/dt-bindings/iio/addac/adi,ad74413r.h +ANALOG DEVICES INC AD7625 DRIVER +M: Michael Hennerich +M: Nuno Sá +R: Trevor Gamblin +S: Supported +W: https://ez.analog.com/linux-software-drivers +W: http://analogdevicesinc.github.io/hdl/projects/pulsar_lvds/index.html +F: Documentation/devicetree/bindings/iio/adc/adi,ad7625.yaml + ANALOG DEVICES INC AD7768-1 DRIVER M: Michael Hennerich L: linux-iio@vger.kernel.org From patchwork Fri Aug 9 18:41:09 2024 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Trevor Gamblin X-Patchwork-Id: 13759096 Received: from mail-qt1-f174.google.com (mail-qt1-f174.google.com [209.85.160.174]) (using TLSv1.2 with cipher ECDHE-RSA-AES128-GCM-SHA256 (128/128 bits)) (No client certificate requested) by smtp.subspace.kernel.org (Postfix) with ESMTPS id 5A8E714F9F9 for ; Fri, 9 Aug 2024 18:41:19 +0000 (UTC) Authentication-Results: smtp.subspace.kernel.org; arc=none smtp.client-ip=209.85.160.174 ARC-Seal: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1723228882; cv=none; b=uQP83U4F12hs4qAjX8Adwinbc1tOmwgenyoJL/ZoDkc0qqJmoTBw6ZwrJvb3UUnuPOAFG6B2WIApEEVIMp/E4G3aIKLQ3rv/W3CSRETAXldXRq80/+YEm0pjP5YbPj16MhCaiLPlK8jjiaeGP6alvM7GCUUNSeQ2eDEf43bo0V8= ARC-Message-Signature: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1723228882; c=relaxed/simple; bh=oww0a7G82Vd75ByBb5Q7ebQCJInma1hwiT7+KxQwPY0=; h=From:Date:Subject:MIME-Version:Content-Type:Message-Id:References: In-Reply-To:To:Cc; b=JCUZMNSgiFJi6qbcbuiVw29eZEjSMhScBJkUIsxDlqN5YyzqQwTQXjquJcnkMKIT6hs0P53nR92EkW6f4ENK/DYDn3WsYLICh2wptX4o3YVZaZ+z9UdEcmW+sMtSJxLLQELAkqxgiWIPOWBT20wuqWKAHKbIQ1xVrrzwY/dqPkA= ARC-Authentication-Results: i=1; smtp.subspace.kernel.org; dmarc=none (p=none dis=none) header.from=baylibre.com; spf=pass smtp.mailfrom=baylibre.com; dkim=pass (2048-bit key) header.d=baylibre-com.20230601.gappssmtp.com header.i=@baylibre-com.20230601.gappssmtp.com header.b=0GO+ZeTg; arc=none smtp.client-ip=209.85.160.174 Authentication-Results: smtp.subspace.kernel.org; dmarc=none (p=none dis=none) header.from=baylibre.com Authentication-Results: smtp.subspace.kernel.org; spf=pass smtp.mailfrom=baylibre.com Authentication-Results: smtp.subspace.kernel.org; dkim=pass (2048-bit key) header.d=baylibre-com.20230601.gappssmtp.com header.i=@baylibre-com.20230601.gappssmtp.com header.b="0GO+ZeTg" Received: by mail-qt1-f174.google.com with SMTP id d75a77b69052e-4519383592aso14352781cf.3 for ; Fri, 09 Aug 2024 11:41:19 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=baylibre-com.20230601.gappssmtp.com; s=20230601; t=1723228878; x=1723833678; darn=vger.kernel.org; h=cc:to:in-reply-to:references:message-id:content-transfer-encoding :mime-version:subject:date:from:from:to:cc:subject:date:message-id :reply-to; bh=PxuHSfxj6BDBHAYOW+Ar8FckHNsRnM9Jp6mgzbqvrXw=; b=0GO+ZeTgTNz+bh9L4L0p0BouzGISPa9jt9Ij2lZEEnbPQT6ajm86+6XbeqYiCUGPZ+ NlIFqiED0mI4FlZpIB1HTWXOmXhlp1X+w07xGU1z7tbnQq36pkgbxbjKPbS3BpE3FHNs Z465bM7WSnz1FDfeeCmS3Uhyj7pagrNWXDZFgd1+idquDiobOsmAdU8HuVqSNqzLxuHj o4VXu2bK44mhindLmigBEwUFuBlezdqgjwC/XZRtI6usW8KNHXLNvyPHxeHosXjejhTG hjI3k6Xs57r7Y3byOhSQwZCzxvutnsP7syX6+MvNERQxWWQZc6yRdGYP8mFxNYcFOMbw g6YA== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20230601; t=1723228878; x=1723833678; h=cc:to:in-reply-to:references:message-id:content-transfer-encoding :mime-version:subject:date:from:x-gm-message-state:from:to:cc :subject:date:message-id:reply-to; bh=PxuHSfxj6BDBHAYOW+Ar8FckHNsRnM9Jp6mgzbqvrXw=; b=pdDbaWkCPXn3nTwJwvvc7ANLCGeHujnr6JuIWV7+4BiQJ+wIRRWuXm6uqzIch1Nu8y FzCwtc5zO1zeQ04dJkZDbxchwjO3K7W1cPDHKNCY6NQSDz0m0zbBeozWXzEzibifI0Ak c5tpo6kswINKzdPfrz8AivQuEElpi+IhXl7zNOSKf0C/VT70QGi/fszIAu625GboMKgc d7SVyduWpg3NgZ72lEq5A2Lv7PXp3NP5acq9eHMpiRioNJ9XMv/2mxNxm/Vr2AexDjeT JvJph0fGCrgv8zIz9Ds5mLzBts0cvmR51WPe6lfq9NqSCLF9M8xB8aKfFPVuQxBoLcrk T75g== X-Gm-Message-State: AOJu0Yz13HPVKmpUtcinnnQnSKltMqVdd4TaacaCywvAi3HFqlEeKPx7 Xmw3fOHG9XZBS2v6WYNlE8JLH+nyzbgwS7iQUtU9UlsSYrz/nrnDgxPoDAXIbg8= X-Google-Smtp-Source: AGHT+IE2/c3BCadx+WmGqWd1Mk8L9IrZaCoRvhPz5HyhEnER9+a4ve6pOn/D4aUTmNF0MRUP9alUuQ== X-Received: by 2002:a05:622a:22a0:b0:447:f402:58a5 with SMTP id d75a77b69052e-453125d4ff5mr34822721cf.34.1723228878091; Fri, 09 Aug 2024 11:41:18 -0700 (PDT) Received: from [127.0.1.1] (d24-150-219-207.home.cgocable.net. [24.150.219.207]) by smtp.gmail.com with ESMTPSA id d75a77b69052e-4531c1d723asm370381cf.44.2024.08.09.11.41.16 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Fri, 09 Aug 2024 11:41:17 -0700 (PDT) From: Trevor Gamblin Date: Fri, 09 Aug 2024 14:41:09 -0400 Subject: [PATCH v2 2/3] iio: adc: ad7625: add driver Precedence: bulk X-Mailing-List: linux-iio@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 Message-Id: <20240809-ad7625_r1-v2-2-f85e7ac83150@baylibre.com> References: <20240809-ad7625_r1-v2-0-f85e7ac83150@baylibre.com> In-Reply-To: <20240809-ad7625_r1-v2-0-f85e7ac83150@baylibre.com> To: Lars-Peter Clausen , Michael Hennerich , =?utf-8?q?Nuno_S=C3=A1?= , Jonathan Cameron , Rob Herring , Krzysztof Kozlowski , Conor Dooley , Jonathan Corbet , David Lechner , Uwe Kleine-Konig Cc: linux-iio@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-doc@vger.kernel.org, Trevor Gamblin X-Mailer: b4 0.14.1 Add a driver for the AD762x and AD796x family of ADCs. These are pin-compatible devices using an LVDS interface for data transfer, capable of sampling at rates of 6 (AD7625), 10 (AD7626), and 5 (AD7960/AD7961) MSPS, respectively. They also feature multiple voltage reference options based on the configuration of the EN1/EN0 pins, which can be set in the devicetree. Signed-off-by: Trevor Gamblin --- MAINTAINERS | 1 + drivers/iio/adc/Kconfig | 15 ++ drivers/iio/adc/Makefile | 1 + drivers/iio/adc/ad7625.c | 688 +++++++++++++++++++++++++++++++++++++++++++++++ 4 files changed, 705 insertions(+) diff --git a/MAINTAINERS b/MAINTAINERS index 2361f92751dd..a90972e1c5c5 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -1268,6 +1268,7 @@ S: Supported W: https://ez.analog.com/linux-software-drivers W: http://analogdevicesinc.github.io/hdl/projects/pulsar_lvds/index.html F: Documentation/devicetree/bindings/iio/adc/adi,ad7625.yaml +F: drivers/iio/adc/ad7625.c ANALOG DEVICES INC AD7768-1 DRIVER M: Michael Hennerich diff --git a/drivers/iio/adc/Kconfig b/drivers/iio/adc/Kconfig index f60fe85a30d5..e25fb505f545 100644 --- a/drivers/iio/adc/Kconfig +++ b/drivers/iio/adc/Kconfig @@ -219,6 +219,21 @@ config AD7606_IFACE_SPI To compile this driver as a module, choose M here: the module will be called ad7606_spi. +config AD7625 + tristate "Analog Devices AD7625/AD7626 High Speed ADC driver" + select IIO_BACKEND + help + Say yes here to build support for Analog Devices: + * AD7625 16-Bit, 6 MSPS PulSAR Analog-to-Digital Converter + * AD7626 16-Bit, 10 MSPS PulSAR Analog-to-Digital Converter + * AD7960 18-Bit, 5 MSPS PulSAR Analog-to-Digital Converter + * AD7961 16-Bit, 5 MSPS PulSAR Analog-to-Digital Converter + + The driver requires the assistance of the AXI ADC IP core to operate. + + To compile this driver as a module, choose M here: the module will be + called ad7625. + config AD7766 tristate "Analog Devices AD7766/AD7767 ADC driver" depends on SPI_MASTER diff --git a/drivers/iio/adc/Makefile b/drivers/iio/adc/Makefile index d370e066544e..6bf429ca24ea 100644 --- a/drivers/iio/adc/Makefile +++ b/drivers/iio/adc/Makefile @@ -23,6 +23,7 @@ obj-$(CONFIG_AD7476) += ad7476.o obj-$(CONFIG_AD7606_IFACE_PARALLEL) += ad7606_par.o obj-$(CONFIG_AD7606_IFACE_SPI) += ad7606_spi.o obj-$(CONFIG_AD7606) += ad7606.o +obj-$(CONFIG_AD7625) += ad7625.o obj-$(CONFIG_AD7766) += ad7766.o obj-$(CONFIG_AD7768_1) += ad7768-1.o obj-$(CONFIG_AD7780) += ad7780.o diff --git a/drivers/iio/adc/ad7625.c b/drivers/iio/adc/ad7625.c new file mode 100644 index 000000000000..3ac3c56d43eb --- /dev/null +++ b/drivers/iio/adc/ad7625.c @@ -0,0 +1,688 @@ +// SPDX-License-Identifier: (GPL-2.0-only OR BSD-3-Clause) +/* + * Analog Devices Inc. AD7625 ADC driver + * + * Copyright 2024 Analog Devices Inc. + * Copyright 2024 BayLibre, SAS + * + * Note that this driver requires the AXI ADC IP block configured for + * LVDS to function. See Documentation/iio/ad7625.rst for more + * information. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define AD7625_INTERNAL_REF_MV 4096 +#define AD7960_MAX_NBW_FREQ (2 * MEGA) + +struct ad7625_timing_spec { + /* Max conversion high time (t_{CNVH}). */ + unsigned int conv_high_ns; + /* Max conversion to MSB delay (t_{MSB}). */ + unsigned int conv_msb_ns; +}; + +struct ad7625_chip_info { + const char *name; + const unsigned int max_sample_rate_hz; + const struct ad7625_timing_spec *timing_spec; + const struct iio_chan_spec chan_spec; + const bool has_power_down_state; + const bool has_bandwidth_control; + const bool has_internal_vref; +}; + +/* AD7625_CHAN_SPEC - Define a chan spec structure for a specific chip */ +#define AD7625_CHAN_SPEC(_bits) { \ + .type = IIO_VOLTAGE, \ + .indexed = 1, \ + .differential = 1, \ + .channel = 0, \ + .channel2 = 1, \ + .info_mask_separate = BIT(IIO_CHAN_INFO_SCALE), \ + .info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ), \ + .scan_index = 0, \ + .scan_type.sign = 's', \ + .scan_type.storagebits = (_bits) > 16 ? 32 : 16, \ + .scan_type.realbits = (_bits), \ +} + +struct ad7625_state { + const struct ad7625_chip_info *info; + struct iio_backend *back; + /* rate of the clock gated by the "clk_gate" PWM */ + unsigned long ref_clk_rate_hz; + /* PWM burst signal for transferring acquired data to the host */ + struct pwm_device *clk_gate_pwm; + /* + * PWM control signal for initiating data conversion. Analog + * inputs are sampled beginning on this signal's rising edge. + */ + struct pwm_device *cnv_pwm; + /* + * Waveforms containing the last-requested and rounded + * properties for the clk_gate and cnv PWMs + */ + struct pwm_waveform clk_gate_wf; + struct pwm_waveform cnv_wf; + unsigned int vref_mv; + int sampling_freq_hz; + /* + * Optional GPIOs for controlling device state. EN0 and EN1 + * determine voltage reference configuration and on/off state. + * EN2 controls the device -3dB bandwidth (and by extension, max + * sample rate). EN3 controls the VCM reference output. EN2 and + * EN3 are only present for the AD796x devices. + */ + struct gpio_desc *en_gpios[4]; + bool can_power_down; + bool can_refin; + bool can_ref_4v096; + /* + * Indicate whether the bandwidth can be narrow (9MHz). + * When true, device sample rate must also be < 2MSPS. + */ + bool can_narrow_bandwidth; + /* Indicate whether the bandwidth can be wide (28MHz). */ + bool can_wide_bandwidth; + bool can_ref_5v; + bool can_snooze; + bool can_test_pattern; + /* Indicate whether there is a REFIN supply connected */ + bool have_refin; +}; + +static const struct ad7625_timing_spec ad7625_timing_spec = { + .conv_high_ns = 40, + .conv_msb_ns = 145, +}; + +static const struct ad7625_timing_spec ad7626_timing_spec = { + .conv_high_ns = 40, + .conv_msb_ns = 80, +}; + +/* + * conv_msb_ns is set to 0 instead of the datasheet maximum of 200ns to + * avoid exceeding the minimum conversion time, i.e. it is effectively + * modulo 200 and offset by a full period. Values greater than or equal + * to the period would be rejected by the PWM API. + */ +static const struct ad7625_timing_spec ad7960_timing_spec = { + .conv_high_ns = 80, + .conv_msb_ns = 0, +}; + +static const struct ad7625_chip_info ad7625_chip_info = { + .name = "ad7625", + .max_sample_rate_hz = 6 * MEGA, + .timing_spec = &ad7625_timing_spec, + .chan_spec = AD7625_CHAN_SPEC(16), + .has_power_down_state = false, + .has_bandwidth_control = false, + .has_internal_vref = true, +}; + +static const struct ad7625_chip_info ad7626_chip_info = { + .name = "ad7626", + .max_sample_rate_hz = 10 * MEGA, + .timing_spec = &ad7626_timing_spec, + .chan_spec = AD7625_CHAN_SPEC(16), + .has_power_down_state = true, + .has_bandwidth_control = false, + .has_internal_vref = true, +}; + +static const struct ad7625_chip_info ad7960_chip_info = { + .name = "ad7960", + .max_sample_rate_hz = 5 * MEGA, + .timing_spec = &ad7960_timing_spec, + .chan_spec = AD7625_CHAN_SPEC(18), + .has_power_down_state = true, + .has_bandwidth_control = true, + .has_internal_vref = false, +}; + +static const struct ad7625_chip_info ad7961_chip_info = { + .name = "ad7961", + .max_sample_rate_hz = 5 * MEGA, + .timing_spec = &ad7960_timing_spec, + .chan_spec = AD7625_CHAN_SPEC(16), + .has_power_down_state = true, + .has_bandwidth_control = true, + .has_internal_vref = false, +}; + +enum ad7960_mode { + AD7960_MODE_POWER_DOWN, + AD7960_MODE_SNOOZE, + AD7960_MODE_NARROW_BANDWIDTH, + AD7960_MODE_WIDE_BANDWIDTH, + AD7960_MODE_TEST_PATTERN, +}; + +static int ad7625_set_sampling_freq(struct ad7625_state *st, int freq) +{ + u64 target; + struct pwm_waveform clk_gate_wf = { }, cnv_wf = { }; + int ret; + + target = DIV_ROUND_UP_ULL(NSEC_PER_SEC, freq); + cnv_wf.period_length_ns = clamp(target, 100, 10 * KILO); + + /* + * Use the maximum conversion time t_CNVH from the datasheet as + * the duty_cycle for ref_clk, cnv, and clk_gate + */ + cnv_wf.duty_length_ns = st->info->timing_spec->conv_high_ns; + + ret = pwm_round_waveform_might_sleep(st->cnv_pwm, &cnv_wf); + if (ret) + return ret; + + /* + * Set up the burst signal for transferring data. period and + * offset should mirror the CNV signal + */ + clk_gate_wf.period_length_ns = cnv_wf.period_length_ns; + + clk_gate_wf.duty_length_ns = DIV_ROUND_UP_ULL((u64)NSEC_PER_SEC * + st->info->chan_spec.scan_type.realbits, + st->ref_clk_rate_hz); + + /* max t_MSB from datasheet */ + clk_gate_wf.duty_offset_ns = st->info->timing_spec->conv_msb_ns; + + ret = pwm_round_waveform_might_sleep(st->clk_gate_pwm, &clk_gate_wf); + if (ret) + return ret; + + st->cnv_wf = cnv_wf; + st->clk_gate_wf = clk_gate_wf; + + /* TODO: Add a rounding API for PWMs that can simplify this */ + target = DIV_ROUND_CLOSEST_ULL(st->ref_clk_rate_hz, freq); + st->sampling_freq_hz = DIV_ROUND_CLOSEST_ULL(st->ref_clk_rate_hz, + target); + + return 0; +} + +static int ad7625_read_raw(struct iio_dev *indio_dev, + const struct iio_chan_spec *chan, + int *val, int *val2, long info) +{ + struct ad7625_state *st = iio_priv(indio_dev); + + switch (info) { + case IIO_CHAN_INFO_SAMP_FREQ: + *val = st->sampling_freq_hz; + + return IIO_VAL_INT; + + case IIO_CHAN_INFO_SCALE: + *val = st->vref_mv; + *val2 = chan->scan_type.realbits - 1; + + return IIO_VAL_FRACTIONAL_LOG2; + + default: + return -EINVAL; + } +} + +static int ad7625_write_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + int val, int val2, long info) +{ + struct ad7625_state *st = iio_priv(indio_dev); + + switch (info) { + case IIO_CHAN_INFO_SAMP_FREQ: + iio_device_claim_direct_scoped(return -EBUSY, indio_dev) + return ad7625_set_sampling_freq(st, val); + unreachable(); + default: + return -EINVAL; + } +} + +static int ad7625_parse_mode(struct device *dev, struct ad7625_state *st, + int num_gpios) +{ + bool en_always_on[4], en_always_off[4]; + bool en_may_be_on[4], en_may_be_off[4]; + char en_gpio_buf[4]; + char always_on_buf[18]; + int i; + + for (i = 0; i < num_gpios; i++) { + snprintf(en_gpio_buf, sizeof(en_gpio_buf), "en%d", i); + snprintf(always_on_buf, sizeof(always_on_buf), + "adi,en%d-always-on", i); + /* Set the device to 0b0000 (power-down mode) by default */ + st->en_gpios[i] = devm_gpiod_get_optional(dev, en_gpio_buf, + GPIOD_OUT_LOW); + if (IS_ERR(st->en_gpios[i])) + return dev_err_probe(dev, PTR_ERR(st->en_gpios[i]), + "failed to get EN%d GPIO\n", i); + + en_always_on[i] = device_property_read_bool(dev, always_on_buf); + if (st->en_gpios[i] && en_always_on[i]) + return dev_err_probe(dev, -EINVAL, + "cannot have adi,en%d-always-on and en%d-gpios\n", i, i); + + en_may_be_off[i] = !en_always_on[i]; + en_may_be_on[i] = en_always_on[i] || st->en_gpios[i]; + en_always_off[i] = !en_always_on[i] && !st->en_gpios[i]; + } + + /* + * Power down is mode 0bXX00, but not all devices have a valid + * power down state. + */ + st->can_power_down = en_may_be_off[1] && en_may_be_off[0] && + st->info->has_power_down_state; + /* + * The REFIN pin can take a 1.2V (AD762x) or 2.048V (AD796x) + * external reference when the mode is 0bXX01. + */ + st->can_refin = en_may_be_off[1] && en_may_be_on[0]; + /* 4.096V can be applied to REF when the EN mode is 0bXX10. */ + st->can_ref_4v096 = en_may_be_on[1] && en_may_be_off[0]; + + /* Avoid AD796x-specific setup if the part is an AD762x */ + if (num_gpios == 2) + return 0; + + /* mode 0b1100 (AD796x) is invalid */ + if (en_always_on[3] && en_always_on[2] && + en_always_off[1] && en_always_off[0]) + return dev_err_probe(dev, -EINVAL, + "EN GPIOs set to invalid mode 0b1100\n"); + /* + * 5V can be applied to the AD796x REF pin when the EN mode is + * the same (0bX001 or 0bX101) as for can_refin, and REFIN is + * 0V. + */ + st->can_ref_5v = st->can_refin; + /* + * Bandwidth (AD796x) is controlled solely by EN2. If it's + * specified and not hard-wired, then we can configure it to + * change the bandwidth between 28MHz and 9MHz. + */ + st->can_narrow_bandwidth = en_may_be_on[2]; + /* Wide bandwidth mode is possible if EN2 can be 0. */ + st->can_wide_bandwidth = en_may_be_off[2]; + /* Snooze mode (AD796x) is 0bXX11 when REFIN = 0V. */ + st->can_snooze = en_may_be_on[1] && en_may_be_on[0]; + /* Test pattern mode (AD796x) is 0b0100. */ + st->can_test_pattern = en_may_be_off[3] && en_may_be_on[2] && + en_may_be_off[1] && en_may_be_off[0]; + + return 0; +} + +/* Set EN1 and EN0 based on reference voltage source */ +static void ad7625_set_en_gpios_for_vref(struct ad7625_state *st, + bool have_refin, int ref_mv) +{ + if (have_refin || ref_mv == 5000) { + gpiod_set_value_cansleep(st->en_gpios[1], 0); + gpiod_set_value_cansleep(st->en_gpios[0], 1); + } else if (ref_mv == 4096) { + gpiod_set_value_cansleep(st->en_gpios[1], 1); + gpiod_set_value_cansleep(st->en_gpios[0], 0); + } else { + /* + * Unreachable by AD796x, since the driver will error if + * neither REF nor REFIN is provided + */ + gpiod_set_value_cansleep(st->en_gpios[1], 1); + gpiod_set_value_cansleep(st->en_gpios[0], 1); + } +} + +static int ad7960_set_mode(struct ad7625_state *st, enum ad7960_mode mode, + bool have_refin, int ref_mv) +{ + switch (mode) { + case AD7960_MODE_POWER_DOWN: + if (!st->can_power_down) + return -EINVAL; + + gpiod_set_value_cansleep(st->en_gpios[2], 0); + gpiod_set_value_cansleep(st->en_gpios[1], 0); + gpiod_set_value_cansleep(st->en_gpios[0], 0); + + return 0; + + case AD7960_MODE_SNOOZE: + if (!st->can_snooze) + return -EINVAL; + + gpiod_set_value_cansleep(st->en_gpios[1], 1); + gpiod_set_value_cansleep(st->en_gpios[0], 1); + + return 0; + + case AD7960_MODE_NARROW_BANDWIDTH: + if (!st->can_narrow_bandwidth) + return -EINVAL; + + gpiod_set_value_cansleep(st->en_gpios[2], 1); + ad7625_set_en_gpios_for_vref(st, have_refin, ref_mv); + + return 0; + + case AD7960_MODE_WIDE_BANDWIDTH: + if (!st->can_wide_bandwidth) + return -EINVAL; + + gpiod_set_value_cansleep(st->en_gpios[2], 0); + ad7625_set_en_gpios_for_vref(st, have_refin, ref_mv); + + return 0; + + case AD7960_MODE_TEST_PATTERN: + if (!st->can_test_pattern) + return -EINVAL; + + gpiod_set_value_cansleep(st->en_gpios[3], 0); + gpiod_set_value_cansleep(st->en_gpios[2], 1); + gpiod_set_value_cansleep(st->en_gpios[1], 0); + gpiod_set_value_cansleep(st->en_gpios[0], 0); + + return 0; + + default: + return -EINVAL; + } +} + +static int ad7625_buffer_preenable(struct iio_dev *indio_dev) +{ + struct ad7625_state *st = iio_priv(indio_dev); + int ret; + + ret = pwm_set_waveform_might_sleep(st->cnv_pwm, &st->cnv_wf, false); + if (ret) + return ret; + + ret = pwm_set_waveform_might_sleep(st->clk_gate_pwm, + &st->clk_gate_wf, false); + if (ret) { + /* Disable cnv PWM if clk_gate setup failed */ + pwm_disable(st->cnv_pwm); + return ret; + } + + return 0; +} + +static int ad7625_buffer_postdisable(struct iio_dev *indio_dev) +{ + struct ad7625_state *st = iio_priv(indio_dev); + + pwm_disable(st->cnv_pwm); + pwm_disable(st->clk_gate_pwm); + + return 0; +} + +static const struct iio_info ad7625_info = { + .read_raw = ad7625_read_raw, + .write_raw = ad7625_write_raw, +}; + +static const struct iio_buffer_setup_ops ad7625_buffer_setup_ops = { + .preenable = &ad7625_buffer_preenable, + .postdisable = &ad7625_buffer_postdisable, +}; + +static int devm_ad7625_pwm_get(struct device *dev, struct clk *ref_clk, + struct ad7625_state *st) +{ + unsigned long ref_clk_rate_hz; + + st->cnv_pwm = devm_pwm_get(dev, "cnv"); + if (IS_ERR(st->cnv_pwm)) + return dev_err_probe(dev, PTR_ERR(st->cnv_pwm), + "failed to get cnv pwm\n"); + + /* Preemptively disable the PWM in case it was enabled at boot */ + pwm_disable(st->cnv_pwm); + + st->clk_gate_pwm = devm_pwm_get(dev, "clk_gate"); + if (IS_ERR(st->clk_gate_pwm)) + return dev_err_probe(dev, PTR_ERR(st->clk_gate_pwm), + "failed to get clk_gate pwm\n"); + + /* Preemptively disable the PWM in case it was enabled at boot */ + pwm_disable(st->clk_gate_pwm); + + ref_clk = devm_clk_get_enabled(dev, NULL); + if (IS_ERR(ref_clk)) + return dev_err_probe(dev, PTR_ERR(ref_clk), + "failed to get ref_clk"); + + ref_clk_rate_hz = clk_get_rate(ref_clk); + if (!ref_clk_rate_hz) + return dev_err_probe(dev, -EINVAL, + "failed to get ref_clk rate"); + + st->ref_clk_rate_hz = ref_clk_rate_hz; + + return 0; +} + +/* + * There are three required input voltages for each device, plus two + * conditionally-optional (depending on part) REF and REFIN voltages + * where their validity depends upon the EN pin configuration. + * + * Power-up info for the device says to bring up vio, then vdd2, then + * vdd1, so list them in that order in the regulator_names array. + * + * The reference voltage source is determined like so: + * - internal reference: neither REF or REFIN is connected (invalid for + * AD796x) + * - internal buffer, external reference: REF not connected, REFIN + * connected + * - external reference: REF connected, REFIN not connected + */ +static int devm_ad7625_regulator_setup(struct device *dev, + struct ad7625_state *st) +{ + static const char * const regulator_names[] = { "vio", "vdd2", "vdd1" }; + int ret, ref_mv; + + ret = devm_regulator_bulk_get_enable(dev, ARRAY_SIZE(regulator_names), + regulator_names); + if (ret) + return ret; + + ret = devm_regulator_get_enable_read_voltage(dev, "ref"); + if (ret < 0 && ret != -ENODEV) + return dev_err_probe(dev, ret, "failed to get REF voltage\n"); + + ref_mv = ret == -ENODEV ? 0 : ret / 1000; + + ret = devm_regulator_get_enable_optional(dev, "refin"); + if (ret < 0 && ret != -ENODEV) + return dev_err_probe(dev, ret, "failed to get REFIN voltage\n"); + + st->have_refin = ret != -ENODEV; + + if (st->have_refin && !st->can_refin) + return dev_err_probe(dev, -EINVAL, + "REFIN provided in unsupported mode\n"); + + if (!st->info->has_internal_vref && !st->have_refin && !ref_mv) + return dev_err_probe(dev, -EINVAL, + "Need either REFIN or REF"); + + if (st->have_refin && ref_mv) + return dev_err_probe(dev, -EINVAL, + "cannot have both REFIN and REF supplies\n"); + + if (ref_mv == 4096 && !st->can_ref_4v096) + return dev_err_probe(dev, -EINVAL, + "REF is 4.096V in unsupported mode\n"); + + if (ref_mv == 5000 && !st->can_ref_5v) + return dev_err_probe(dev, -EINVAL, + "REF is 5V in unsupported mode\n"); + + st->vref_mv = ref_mv ?: AD7625_INTERNAL_REF_MV; + + return 0; +} + +static int ad7625_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct iio_dev *indio_dev; + struct ad7625_state *st; + struct clk *ref_clk; + int ret; + int default_sample_freq; + + indio_dev = devm_iio_device_alloc(dev, sizeof(*st)); + if (!indio_dev) + return -ENOMEM; + + st = iio_priv(indio_dev); + + st->info = device_get_match_data(dev); + if (!st->info) + return dev_err_probe(dev, -EINVAL, "no chip info\n"); + + if (device_property_read_bool(dev, "adi,no-dco")) + return dev_err_probe(dev, -EINVAL, + "self-clocked mode not supported\n"); + + if (st->info->has_bandwidth_control) + ret = ad7625_parse_mode(dev, st, 4); + else + ret = ad7625_parse_mode(dev, st, 2); + + if (ret) + return ret; + + ret = devm_ad7625_regulator_setup(dev, st); + if (ret) + return ret; + + /* Set the device mode based on detected EN configuration. */ + if (!st->info->has_bandwidth_control) { + ad7625_set_en_gpios_for_vref(st, st->have_refin, st->vref_mv); + } else { + /* + * If neither sampling mode is available, then report an error, + * since the other modes are not useful defaults. + */ + if (st->can_wide_bandwidth) { + ret = ad7960_set_mode(st, AD7960_MODE_WIDE_BANDWIDTH, + st->have_refin, st->vref_mv); + } else if (st->can_narrow_bandwidth) { + ret = ad7960_set_mode(st, AD7960_MODE_NARROW_BANDWIDTH, + st->have_refin, st->vref_mv); + } else { + return dev_err_probe(dev, -EINVAL, + "couldn't set device to wide or narrow bandwidth modes\n"); + } + + if (ret) + return dev_err_probe(dev, -EINVAL, + "failed to set EN pins\n"); + } + + ret = devm_ad7625_pwm_get(dev, ref_clk, st); + if (ret) + return ret; + + indio_dev->channels = &st->info->chan_spec; + indio_dev->num_channels = 1; + indio_dev->name = st->info->name; + indio_dev->info = &ad7625_info; + indio_dev->setup_ops = &ad7625_buffer_setup_ops; + + st->back = devm_iio_backend_get(dev, NULL); + if (IS_ERR(st->back)) + return dev_err_probe(dev, PTR_ERR(st->back), + "failed to get IIO backend"); + + ret = devm_iio_backend_request_buffer(dev, st->back, indio_dev); + if (ret) + return ret; + + ret = devm_iio_backend_enable(dev, st->back); + if (ret) + return ret; + + /* + * Set the initial sampling frequency to the maximum, unless the + * AD796x device is limited to narrow bandwidth by EN2 == 1, in + * which case the sampling frequency should be limited to 2MSPS + */ + if (!st->info->has_bandwidth_control) { + default_sample_freq = st->info->max_sample_rate_hz; + } else { + default_sample_freq = !st->can_wide_bandwidth ? + AD7960_MAX_NBW_FREQ : + st->info->max_sample_rate_hz; + } + + ret = ad7625_set_sampling_freq(st, default_sample_freq); + if (ret) + dev_err_probe(dev, ret, + "failed to set valid sampling frequency\n"); + + return devm_iio_device_register(dev, indio_dev); +} + +static const struct of_device_id ad7625_of_match[] = { + { .compatible = "adi,ad7625", .data = &ad7625_chip_info }, + { .compatible = "adi,ad7626", .data = &ad7626_chip_info }, + { .compatible = "adi,ad7960", .data = &ad7960_chip_info }, + { .compatible = "adi,ad7961", .data = &ad7961_chip_info }, + { } +}; +MODULE_DEVICE_TABLE(of, ad7625_of_match); + +static const struct platform_device_id ad7625_device_ids[] = { + { .name = "ad7625", .driver_data = (kernel_ulong_t)&ad7625_chip_info }, + { .name = "ad7626", .driver_data = (kernel_ulong_t)&ad7626_chip_info }, + { .name = "ad7960", .driver_data = (kernel_ulong_t)&ad7960_chip_info }, + { .name = "ad7961", .driver_data = (kernel_ulong_t)&ad7961_chip_info }, + { } +}; +MODULE_DEVICE_TABLE(platform, ad7625_device_ids); + +static struct platform_driver ad7625_driver = { + .probe = ad7625_probe, + .driver = { + .name = "ad7625", + .of_match_table = ad7625_of_match, + }, + .id_table = ad7625_device_ids, +}; +module_platform_driver(ad7625_driver); + +MODULE_AUTHOR("Trevor Gamblin "); +MODULE_DESCRIPTION("Analog Devices AD7625 ADC"); +MODULE_LICENSE("Dual BSD/GPL"); +MODULE_IMPORT_NS(IIO_BACKEND); From patchwork Fri Aug 9 18:41:10 2024 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Trevor Gamblin X-Patchwork-Id: 13759097 Received: from mail-qt1-f175.google.com (mail-qt1-f175.google.com [209.85.160.175]) (using TLSv1.2 with cipher ECDHE-RSA-AES128-GCM-SHA256 (128/128 bits)) (No client certificate requested) by smtp.subspace.kernel.org (Postfix) with ESMTPS id 5F39D15FD15 for ; Fri, 9 Aug 2024 18:41:20 +0000 (UTC) Authentication-Results: smtp.subspace.kernel.org; arc=none smtp.client-ip=209.85.160.175 ARC-Seal: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1723228882; cv=none; b=aEZ895KC0XEeKdjq8sqCosVq2B1ImdYY5p/DgDe7+sMRc3SaoAGhF18y4632DrTeSkCqGAIkeBo7QFxEKqhI4OKkXyI3lqLV9fkFNmhyJvSCkkBs4qOiYTe2Rqmr01w3bh83lJuXfbriFJt6X3CnTxUZTlRFbHE2taRVfPSvI9w= ARC-Message-Signature: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1723228882; c=relaxed/simple; bh=GKmFo3bmFk2IVwRE7ksCrTnyul2s0DsTqMziI0uIR6M=; h=From:Date:Subject:MIME-Version:Content-Type:Message-Id:References: In-Reply-To:To:Cc; b=kij4dWqNXe0XhvVElaPseRLQMANKqZVYoVyKAyjLDAbYHkZu9BX51YUNmgVvoVcE0xyGJ37pFodZiMXvB/+T+LwNsrc7+EOODQW9wk3pLeFTJy4u6EIkGNsuY64m/mihAAsXd3Ij81cnOKJDoghhoMyC5IvE3mn7Cs+zWQF/qlA= ARC-Authentication-Results: i=1; smtp.subspace.kernel.org; dmarc=none (p=none dis=none) header.from=baylibre.com; spf=pass smtp.mailfrom=baylibre.com; dkim=pass (2048-bit key) header.d=baylibre-com.20230601.gappssmtp.com header.i=@baylibre-com.20230601.gappssmtp.com header.b=z26bnmt5; arc=none smtp.client-ip=209.85.160.175 Authentication-Results: smtp.subspace.kernel.org; dmarc=none (p=none dis=none) header.from=baylibre.com Authentication-Results: smtp.subspace.kernel.org; spf=pass smtp.mailfrom=baylibre.com Authentication-Results: smtp.subspace.kernel.org; dkim=pass (2048-bit key) header.d=baylibre-com.20230601.gappssmtp.com header.i=@baylibre-com.20230601.gappssmtp.com header.b="z26bnmt5" Received: by mail-qt1-f175.google.com with SMTP id d75a77b69052e-44fe28eb1bfso13059031cf.0 for ; Fri, 09 Aug 2024 11:41:20 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=baylibre-com.20230601.gappssmtp.com; s=20230601; t=1723228879; x=1723833679; darn=vger.kernel.org; h=cc:to:in-reply-to:references:message-id:content-transfer-encoding :mime-version:subject:date:from:from:to:cc:subject:date:message-id :reply-to; bh=/5uzNUVmRh9vWTdDmOIKmWFbEDxFk4bBzY+xGs2C1kM=; b=z26bnmt57rTDtXR28mANK0oVIKhQB2gMLDLaJsY6iB42x6f2AwDNLua2i3haVObLIP wydabmCS+EAqr12mtHqwbEYZIZxPGqTn5NVTMYUWR+Rx9YXAu09TfwEF+27sbU5mVcdK gPsXXlzYysJ8mUdTwdJaNiTUw4bCSU3719rAUjqpmuVpBvOydG+kfPEHD28Ms84FXi3x vK6TEW6bWObfrc4x6UCigj+eGeKUhprwPCrbvMN31lrNKCa+uxddwokfx/DRggllKMUO vYF1VLWTu69Zgw66QCAsebPA/vTHvLNiBlEwHOKZDDjKQWBV/Vo+a88OPilQ/nkqMq+0 330Q== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20230601; t=1723228879; x=1723833679; h=cc:to:in-reply-to:references:message-id:content-transfer-encoding :mime-version:subject:date:from:x-gm-message-state:from:to:cc :subject:date:message-id:reply-to; bh=/5uzNUVmRh9vWTdDmOIKmWFbEDxFk4bBzY+xGs2C1kM=; b=iFd0QpSXUk3J+ph0wqnPp8gkuLeLBxz3zh77S/XxNAtlQCuD5l5KxK1BPVU1gn0/sK UvCZs62tUWK6c/W6eFRmn19htfu2Hzljo8yGO3gWM2SL1k/qROZ58JbNOp/3sIZFNMy4 yFkjtBRWrGssvHdKAuBcmYC8mQ/USVnZeJTTM3TDCQxykVfTmZQOBNYKRkWIwPIX4rrd 3ZkdjnvPsJ+MrUyN4FIzdGg5Hw7azBOTpp5oAuLZnUQDJ47R3PMwuDAI+6nn+LfiYSp7 BcvRI6jL+SJJipz+OghpM3huAZDGbpMOzUQtihu5C9SiH1hHfUPuEZsl4ZQ1P3Jtn3J0 vnLw== X-Gm-Message-State: AOJu0Yx+cI6a0sOZgee8aS8WZRZY/2sQ8SSxulOomi0cv8tUMpnrBKC6 EDA+oVmQGSHUSwHCGOIaxUnHOi0zxyyBMRCdg48BuyM5XTSLgSxp4ABY4cxKZy4= X-Google-Smtp-Source: AGHT+IEH6rBg8rXSvuwRkWBK6lSt3cf/9vZ3CI2KSvFnC2fju7qVpHmtGUnb5onX/VEKhf3izdyAMA== X-Received: by 2002:a05:622a:258e:b0:451:9f75:4667 with SMTP id d75a77b69052e-453125a7e84mr28836101cf.28.1723228879272; Fri, 09 Aug 2024 11:41:19 -0700 (PDT) Received: from [127.0.1.1] (d24-150-219-207.home.cgocable.net. [24.150.219.207]) by smtp.gmail.com with ESMTPSA id d75a77b69052e-4531c1d723asm370381cf.44.2024.08.09.11.41.18 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Fri, 09 Aug 2024 11:41:19 -0700 (PDT) From: Trevor Gamblin Date: Fri, 09 Aug 2024 14:41:10 -0400 Subject: [PATCH v2 3/3] docs: iio: new docs for ad7625 driver Precedence: bulk X-Mailing-List: linux-iio@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 Message-Id: <20240809-ad7625_r1-v2-3-f85e7ac83150@baylibre.com> References: <20240809-ad7625_r1-v2-0-f85e7ac83150@baylibre.com> In-Reply-To: <20240809-ad7625_r1-v2-0-f85e7ac83150@baylibre.com> To: Lars-Peter Clausen , Michael Hennerich , =?utf-8?q?Nuno_S=C3=A1?= , Jonathan Cameron , Rob Herring , Krzysztof Kozlowski , Conor Dooley , Jonathan Corbet , David Lechner , Uwe Kleine-Konig Cc: linux-iio@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-doc@vger.kernel.org, Trevor Gamblin X-Mailer: b4 0.14.1 Add documentation for the AD7625/AD7626/AD7960/AD7961 ADCs. Signed-off-by: Trevor Gamblin --- Documentation/iio/ad7625.rst | 91 ++++++++++++++++++++++++++++++++++++++++++++ MAINTAINERS | 1 + 2 files changed, 92 insertions(+) diff --git a/Documentation/iio/ad7625.rst b/Documentation/iio/ad7625.rst new file mode 100644 index 000000000000..61761e3b75c3 --- /dev/null +++ b/Documentation/iio/ad7625.rst @@ -0,0 +1,91 @@ +.. SPDX-License-Identifier: GPL-2.0-only + +==================== +AD7625 driver +==================== + +ADC driver for Analog Devices Inc. AD7625, AD7626, AD7960, and AD7961 +devices. The module name is ``ad7625``. + +Supported devices +================= + +The following chips are supported by this driver: + +* `AD7625 `_ +* `AD7626 `_ +* `AD7960 `_ +* `AD7961 `_ + +The driver requires use of the Pulsar LVDS HDL project: + +* `Pulsar LVDS HDL `_ + +To trigger conversions and enable subsequent data transfer, the devices +require coupled PWM signals with a phase offset. + +Supported features +================== + +Conversion control modes +------------------------ + +The driver currently supports one of two possible LVDS conversion control methods. + +Echoed-Clock interface mode +^^^^^^^^^^^^^^^^^^^^^^^^^^^ + +.. code-block:: + + +----------------+ + +xxxxxxxxxxxxxxxxxxxxxxxxxx| CNV | + X | | + v | HOST | + +----------------------------+ | | + | CNV+/CNV- DCO+/DCO- |xxxxxxx>| CLK_IN | + | | | | + | | | | + | AD7625 D+/D- |xxxxxxx>| DATA_IN | + | | | | + | | | | + | CLK+/CLK- |