From patchwork Tue Aug 13 18:15:14 2024 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Divya Koppera X-Patchwork-Id: 13762389 X-Patchwork-Delegate: kuba@kernel.org Received: from esa.microchip.iphmx.com (esa.microchip.iphmx.com [68.232.153.233]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.subspace.kernel.org (Postfix) with ESMTPS id 1E34A19E7E3; Tue, 13 Aug 2024 18:13:31 +0000 (UTC) Authentication-Results: smtp.subspace.kernel.org; arc=none smtp.client-ip=68.232.153.233 ARC-Seal: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1723572814; cv=none; b=L63BJdeuV3IxKJmJmIdhBVTfhyb2jCma2GXM9HRr/SN2Rf6ZHdHOH9m3K1CCGYRHkQJc3utEHw3TbxiYEUxLuWaPgdJvUK0rZWx/plkMVfFgIMQFn6J8LJqeBqs5NEnBDF3XvjMCRrM7eKtF3LmGwpkGkAAmg4KMIoi0R/xcD8o= ARC-Message-Signature: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1723572814; c=relaxed/simple; bh=oTIirFSbybkmIJYXc1JctqQbDfveGsUOECrMYDztjlU=; h=From:To:Subject:Date:Message-ID:In-Reply-To:References: MIME-Version:Content-Type; b=H60yY9xf0AihHnDYfdQaYn45RNea/IDrmMBv2wLFfG4DAC3BsiGTmJKpW3MwQ4K+iNRCk1w7QBbZbx2UmNig5NhhQQH2m+nzPUiXOkDXUi9Yb48i75f+5AZbv+eMqYHyMzomBNL2RLSHtkkRW/bWkbqaRtrJqcBcwilRF1nZ2v0= ARC-Authentication-Results: i=1; smtp.subspace.kernel.org; dmarc=pass (p=reject dis=none) header.from=microchip.com; spf=pass smtp.mailfrom=microchip.com; dkim=pass (2048-bit key) header.d=microchip.com header.i=@microchip.com header.b=QkbPS7ug; arc=none smtp.client-ip=68.232.153.233 Authentication-Results: smtp.subspace.kernel.org; dmarc=pass (p=reject dis=none) header.from=microchip.com Authentication-Results: smtp.subspace.kernel.org; spf=pass smtp.mailfrom=microchip.com Authentication-Results: smtp.subspace.kernel.org; dkim=pass (2048-bit key) header.d=microchip.com header.i=@microchip.com header.b="QkbPS7ug" DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/simple; d=microchip.com; i=@microchip.com; q=dns/txt; s=mchp; t=1723572812; x=1755108812; h=from:to:subject:date:message-id:in-reply-to:references: mime-version:content-transfer-encoding; bh=oTIirFSbybkmIJYXc1JctqQbDfveGsUOECrMYDztjlU=; b=QkbPS7ugJVOqEMtou56umbdpKbTaJQ61wVgzkXtE6gODE/51Bp+IBcnp Ej5fRnAHwxhJs15GTsNJ1sOt9VIfG76SzozySbL/y+C63J1bLpI0DGuMe 6f/xZTf6pAJu2WCSJ6cvZdebtz1vHlv98WfTyrENyRubaPn6lE5CtJi4U 7PNl1b/qjiCp2LqkHnJGhfK52Ct11ahyJUi3N2KDLgOePWZFszjw5MpsS eQnpYgHyIl6JptT8uLVgCqxTIiZ8n/KtZkTFOcbUYX+Fl3vlH24CBsCez Tl3aq26dbKb7MaTHqeKcnz13nyWjD7YGaRjUoS4sPRDXXZ2y9GPgiFPRJ g==; X-CSE-ConnectionGUID: v1sbJLSpTMaPZ9cGmAsWIw== X-CSE-MsgGUID: yeaFahXrTdidwAe8R1oZVw== X-IronPort-AV: E=Sophos;i="6.09,286,1716274800"; d="scan'208";a="261364145" X-Amp-Result: SKIPPED(no attachment in message) Received: from unknown (HELO email.microchip.com) ([170.129.1.10]) by esa5.microchip.iphmx.com with ESMTP/TLS/ECDHE-RSA-AES128-GCM-SHA256; 13 Aug 2024 11:13:31 -0700 Received: from chn-vm-ex02.mchp-main.com (10.10.85.144) by chn-vm-ex03.mchp-main.com (10.10.85.151) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256) id 15.1.2507.35; Tue, 13 Aug 2024 11:12:59 -0700 Received: from HYD-DK-UNGSW08.microchip.com (10.10.85.11) by chn-vm-ex02.mchp-main.com (10.10.85.144) with Microsoft SMTP Server id 15.1.2507.35 via Frontend Transport; Tue, 13 Aug 2024 11:12:55 -0700 From: Divya Koppera To: , , , , , , , , , , Subject: [PATCH net-next v2 1/2] net: phy: Add phy library support to check supported list when autoneg is enabled Date: Tue, 13 Aug 2024 23:45:14 +0530 Message-ID: <20240813181515.863208-2-divya.koppera@microchip.com> X-Mailer: git-send-email 2.34.1 In-Reply-To: <20240813181515.863208-1-divya.koppera@microchip.com> References: <20240813181515.863208-1-divya.koppera@microchip.com> Precedence: bulk X-Mailing-List: netdev@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 X-Patchwork-Delegate: kuba@kernel.org Adds support in phy library to accept autoneg configuration only when feature is enabled in supported list. Signed-off-by: Divya.Koppera --- drivers/net/phy/phy.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c index 785182fa5fe0..5e028ddc03da 100644 --- a/drivers/net/phy/phy.c +++ b/drivers/net/phy/phy.c @@ -1089,7 +1089,10 @@ int phy_ethtool_ksettings_set(struct phy_device *phydev, if (autoneg != AUTONEG_ENABLE && autoneg != AUTONEG_DISABLE) return -EINVAL; - if (autoneg == AUTONEG_ENABLE && linkmode_empty(advertising)) + if (autoneg == AUTONEG_ENABLE && + (linkmode_empty(advertising) || + !(linkmode_test_bit(ETHTOOL_LINK_MODE_Autoneg_BIT, + phydev->supported)))) return -EINVAL; if (autoneg == AUTONEG_DISABLE && From patchwork Tue Aug 13 18:15:15 2024 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Divya Koppera X-Patchwork-Id: 13762390 X-Patchwork-Delegate: kuba@kernel.org Received: from esa.microchip.iphmx.com (esa.microchip.iphmx.com [68.232.153.233]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.subspace.kernel.org (Postfix) with ESMTPS id 5F6831A38D4; Tue, 13 Aug 2024 18:13:34 +0000 (UTC) Authentication-Results: smtp.subspace.kernel.org; arc=none smtp.client-ip=68.232.153.233 ARC-Seal: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1723572816; cv=none; b=S27F+zvD1BXFOuyg6scG98np+IBtd3QXs70cGe4Wx8wmPAjrpIqK7mwTlGCppnRx/zFzLJfe4Mmhr1xznqxRdPDwMGqL8QdjJeb5mrleC7HjA6wTCgMa8yq+Wv+sjzcBpoVudOBmZnsU0VhefJR2K9pcTwnCDZBmnjO+L30zMh8= ARC-Message-Signature: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1723572816; c=relaxed/simple; bh=wzcvKf3hhuSOWpQ+D3URem/nzfOEYSq0HpYu+SLtTpg=; h=From:To:Subject:Date:Message-ID:In-Reply-To:References: MIME-Version:Content-Type; b=O1rin6eujbiWkxNML0nXiKWoAER7MrZ+yAFsViB0vjzD5mRQ6ScfLiNiSW03NrBgwqZoBrlVv8SOrizCdru4OPc/4krIWohix6PFVYXBM/WDSukUdd+JIFteN6wcw8L1fNXyD3TsbQtowKZp22uV1DO+pVOZcNKmsP22JYy+1gU= ARC-Authentication-Results: i=1; smtp.subspace.kernel.org; dmarc=pass (p=reject dis=none) header.from=microchip.com; spf=pass smtp.mailfrom=microchip.com; dkim=pass (2048-bit key) header.d=microchip.com header.i=@microchip.com header.b=eBuAxzwV; arc=none smtp.client-ip=68.232.153.233 Authentication-Results: smtp.subspace.kernel.org; dmarc=pass (p=reject dis=none) header.from=microchip.com Authentication-Results: smtp.subspace.kernel.org; spf=pass smtp.mailfrom=microchip.com Authentication-Results: smtp.subspace.kernel.org; dkim=pass (2048-bit key) header.d=microchip.com header.i=@microchip.com header.b="eBuAxzwV" DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/simple; d=microchip.com; i=@microchip.com; q=dns/txt; s=mchp; t=1723572814; x=1755108814; h=from:to:subject:date:message-id:in-reply-to:references: mime-version:content-transfer-encoding; bh=wzcvKf3hhuSOWpQ+D3URem/nzfOEYSq0HpYu+SLtTpg=; b=eBuAxzwVGgn0gJtJyWk/UBE3foLDcgGxXHmN0PHuqasGc2EoelsUc4Sz 8r+UJwtDv8nTXYXRlQ9jV+WW7b5p5Qx5M0PeyBffLh8W+qpcI08AImR6A EKWROxFSkJO29OMEkzRzoT1msb66NpFO7IscfTgMeT6rQ2FPfaVjDVZ2x WZoyNvtV0BEFooqi1Ay6xTdEwatYTM3qfHhQaNDvLJvKgiXkB+r3T6bDX sf0PRGq7LdWgqLbMGfuK/NGPT+lgdjPKAF4tm9sQy5gp2MvMjb+ENF24Z +GjZUQ+En3pQ0Kothob3iH9ZihJZYM21O6LVo02BdsJ2antcIyZDNPZGC Q==; X-CSE-ConnectionGUID: v1sbJLSpTMaPZ9cGmAsWIw== X-CSE-MsgGUID: Cvb9Ue85SrCM3nJAdKvVYA== X-IronPort-AV: E=Sophos;i="6.09,286,1716274800"; d="scan'208";a="261364149" X-Amp-Result: SKIPPED(no attachment in message) Received: from unknown (HELO email.microchip.com) ([170.129.1.10]) by esa5.microchip.iphmx.com with ESMTP/TLS/ECDHE-RSA-AES128-GCM-SHA256; 13 Aug 2024 11:13:32 -0700 Received: from chn-vm-ex02.mchp-main.com (10.10.85.144) by chn-vm-ex03.mchp-main.com (10.10.85.151) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256) id 15.1.2507.35; Tue, 13 Aug 2024 11:13:03 -0700 Received: from HYD-DK-UNGSW08.microchip.com (10.10.85.11) by chn-vm-ex02.mchp-main.com (10.10.85.144) with Microsoft SMTP Server id 15.1.2507.35 via Frontend Transport; Tue, 13 Aug 2024 11:12:59 -0700 From: Divya Koppera To: , , , , , , , , , , Subject: [PATCH net-next v2 2/2] net: phy: microchip_t1: Adds support for lan887x phy Date: Tue, 13 Aug 2024 23:45:15 +0530 Message-ID: <20240813181515.863208-3-divya.koppera@microchip.com> X-Mailer: git-send-email 2.34.1 In-Reply-To: <20240813181515.863208-1-divya.koppera@microchip.com> References: <20240813181515.863208-1-divya.koppera@microchip.com> Precedence: bulk X-Mailing-List: netdev@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 X-Patchwork-Delegate: kuba@kernel.org The LAN887x is a Single-Port Ethernet Physical Layer Transceiver compliant with the IEEE 802.3bw (100BASE-T1) and IEEE 802.3bp (1000BASE-T1) specifications. The device provides 100/1000 Mbit/s transmit and receive capability over a single Unshielded Twisted Pair (UTP) cable. It supports communication with an Ethernet MAC via standard RGMII/SGMII interfaces. LAN887x supports following features, - Events/Interrupts - LED/GPIO Operation - IEEE 1588 (PTP) - SQI - Sleep and Wakeup (TC10) - Cable Diagnostics First patch only supports 100Mbps and 1000Mbps force-mode. Signed-off-by: Divya.Koppera Reviewed-by: Andrew Lunn --- drivers/net/phy/microchip_t1.c | 577 ++++++++++++++++++++++++++++++++- 1 file changed, 576 insertions(+), 1 deletion(-) diff --git a/drivers/net/phy/microchip_t1.c b/drivers/net/phy/microchip_t1.c index a35528497a57..5732ad65e7f9 100644 --- a/drivers/net/phy/microchip_t1.c +++ b/drivers/net/phy/microchip_t1.c @@ -12,6 +12,7 @@ #define PHY_ID_LAN87XX 0x0007c150 #define PHY_ID_LAN937X 0x0007c180 +#define PHY_ID_LAN887X 0x0007c1f0 /* External Register Control Register */ #define LAN87XX_EXT_REG_CTL (0x14) @@ -94,8 +95,101 @@ /* SQI defines */ #define LAN87XX_MAX_SQI 0x07 +/* Chiptop registers */ +#define LAN887X_PMA_EXT_ABILITY_2 0x12 +#define LAN887X_PMA_EXT_ABILITY_2_1000T1 BIT(1) +#define LAN887X_PMA_EXT_ABILITY_2_100T1 BIT(0) + +/* DSP 100M registers */ +#define LAN887x_CDR_CONFIG1_100 0x0405 +#define LAN887x_LOCK1_EQLSR_CONFIG_100 0x0411 +#define LAN887x_SLV_HD_MUFAC_CONFIG_100 0x0417 +#define LAN887x_PLOCK_MUFAC_CONFIG_100 0x041c +#define LAN887x_PROT_DISABLE_100 0x0425 +#define LAN887x_KF_LOOP_SAT_CONFIG_100 0x0454 + +/* DSP 1000M registers */ +#define LAN887X_LOCK1_EQLSR_CONFIG 0x0811 +#define LAN887X_LOCK3_EQLSR_CONFIG 0x0813 +#define LAN887X_PROT_DISABLE 0x0825 +#define LAN887X_FFE_GAIN6 0x0843 +#define LAN887X_FFE_GAIN7 0x0844 +#define LAN887X_FFE_GAIN8 0x0845 +#define LAN887X_FFE_GAIN9 0x0846 +#define LAN887X_ECHO_DELAY_CONFIG 0x08ec +#define LAN887X_FFE_MAX_CONFIG 0x08ee + +/* PCS 1000M registers */ +#define LAN887X_SCR_CONFIG_3 0x8043 +#define LAN887X_INFO_FLD_CONFIG_5 0x8048 + +/* T1 afe registers */ +#define LAN887X_ZQCAL_CONTROL_1 0x8080 +#define LAN887X_AFE_PORT_TESTBUS_CTRL2 0x8089 +#define LAN887X_AFE_PORT_TESTBUS_CTRL4 0x808b +#define LAN887X_AFE_PORT_TESTBUS_CTRL6 0x808d +#define LAN887X_TX_AMPLT_1000T1_REG 0x80b0 +#define LAN887X_INIT_COEFF_DFE1_100 0x0422 + +/* PMA registers */ +#define LAN887X_DSP_PMA_CONTROL 0x810e +#define LAN887X_DSP_PMA_CONTROL_LNK_SYNC BIT(4) + +/* PCS 100M registers */ +#define LAN887X_IDLE_ERR_TIMER_WIN 0x8204 +#define LAN887X_IDLE_ERR_CNT_THRESH 0x8213 + +/* Misc registers */ +#define LAN887X_REG_REG26 0x001a +#define LAN887X_REG_REG26_HW_INIT_SEQ_EN BIT(8) + +/* Mis registers */ +#define LAN887X_MIS_CFG_REG0 0xa00 +#define LAN887X_MIS_CFG_REG0_RCLKOUT_DIS BIT(5) +#define LAN887X_MIS_CFG_REG0_MAC_MODE_SEL GENMASK(1, 0) + +#define LAN887X_MAC_MODE_RGMII 0x01 +#define LAN887X_MAC_MODE_SGMII 0x03 + +#define LAN887X_MIS_DLL_CFG_REG0 0xa01 +#define LAN887X_MIS_DLL_CFG_REG1 0xa02 + +#define LAN887X_MIS_DLL_DELAY_EN BIT(15) +#define LAN887X_MIS_DLL_EN BIT(0) +#define LAN887X_MIS_DLL_CONF (LAN887X_MIS_DLL_DELAY_EN |\ + LAN887X_MIS_DLL_EN) + +#define LAN887X_MIS_CFG_REG2 0xa03 +#define LAN887X_MIS_CFG_REG2_FE_LPBK_EN BIT(2) + +#define LAN887X_MIS_PKT_STAT_REG0 0xa06 +#define LAN887X_MIS_PKT_STAT_REG1 0xa07 +#define LAN887X_MIS_PKT_STAT_REG3 0xa09 +#define LAN887X_MIS_PKT_STAT_REG4 0xa0a +#define LAN887X_MIS_PKT_STAT_REG5 0xa0b +#define LAN887X_MIS_PKT_STAT_REG6 0xa0c + +/* Chiptop common registers */ +#define LAN887X_COMMON_LED3_LED2 0xc05 +#define LAN887X_COMMON_LED2_MODE_SEL_MASK GENMASK(4, 0) +#define LAN887X_LED_LINK_ACT_ANY_SPEED 0x0 + +/* MX chip top registers */ +#define LAN887X_CHIP_SOFT_RST 0xf03f +#define LAN887X_CHIP_SOFT_RST_RESET BIT(0) + +#define LAN887X_SGMII_CTL 0xf01a +#define LAN887X_SGMII_CTL_SGMII_MUX_EN BIT(0) + +#define LAN887X_SGMII_PCS_CFG 0xf034 +#define LAN887X_SGMII_PCS_CFG_PCS_ENA BIT(9) + +#define LAN887X_EFUSE_READ_DAT9 0xf209 +#define LAN887X_EFUSE_READ_DAT9_SGMII_DIS BIT(9) +#define LAN887X_EFUSE_READ_DAT9_MAC_MODE GENMASK(1, 0) + #define DRIVER_AUTHOR "Nisar Sayed " -#define DRIVER_DESC "Microchip LAN87XX/LAN937x T1 PHY driver" +#define DRIVER_DESC "Microchip LAN87XX/LAN937x/LAN887x T1 PHY driver" struct access_ereg_val { u8 mode; @@ -105,6 +199,32 @@ struct access_ereg_val { u16 mask; }; +struct lan887x_hw_stat { + const char *string; + u8 mmd; + u16 reg; + u8 bits; +}; + +static const struct lan887x_hw_stat lan887x_hw_stats[] = { + { "TX Good Count", MDIO_MMD_VEND1, LAN887X_MIS_PKT_STAT_REG0, 14}, + { "RX Good Count", MDIO_MMD_VEND1, LAN887X_MIS_PKT_STAT_REG1, 14}, + { "RX ERR Count detected by PCS", MDIO_MMD_VEND1, LAN887X_MIS_PKT_STAT_REG3, 16}, + { "TX CRC ERR Count", MDIO_MMD_VEND1, LAN887X_MIS_PKT_STAT_REG4, 8}, + { "RX CRC ERR Count", MDIO_MMD_VEND1, LAN887X_MIS_PKT_STAT_REG5, 8}, + { "RX ERR Count for SGMII MII2GMII", MDIO_MMD_VEND1, LAN887X_MIS_PKT_STAT_REG6, 8}, +}; + +struct lan887x_regwr_map { + u8 mmd; + u16 reg; + u16 val; +}; + +struct lan887x_priv { + u64 stats[ARRAY_SIZE(lan887x_hw_stats)]; +}; + static int lan937x_dsp_workaround(struct phy_device *phydev, u16 ereg, u8 bank) { u8 prev_bank; @@ -860,6 +980,446 @@ static int lan87xx_get_sqi_max(struct phy_device *phydev) return LAN87XX_MAX_SQI; } +static int lan887x_rgmii_init(struct phy_device *phydev) +{ + int ret; + + /* SGMII mux disable */ + ret = phy_clear_bits_mmd(phydev, MDIO_MMD_VEND1, + LAN887X_SGMII_CTL, + LAN887X_SGMII_CTL_SGMII_MUX_EN); + if (ret < 0) + return ret; + + /* Select MAC_MODE as RGMII */ + ret = phy_modify_mmd(phydev, MDIO_MMD_VEND1, LAN887X_MIS_CFG_REG0, + LAN887X_MIS_CFG_REG0_MAC_MODE_SEL, + LAN887X_MAC_MODE_RGMII); + if (ret < 0) + return ret; + + /* Disable PCS */ + ret = phy_clear_bits_mmd(phydev, MDIO_MMD_VEND1, + LAN887X_SGMII_PCS_CFG, + LAN887X_SGMII_PCS_CFG_PCS_ENA); + if (ret < 0) + return ret; + + /* LAN887x Errata: RGMII rx clock active in SGMII mode + * Disabled it for SGMII mode + * Re-enabling it for RGMII mode + */ + return phy_clear_bits_mmd(phydev, MDIO_MMD_VEND1, + LAN887X_MIS_CFG_REG0, + LAN887X_MIS_CFG_REG0_RCLKOUT_DIS); +} + +static int lan887x_sgmii_init(struct phy_device *phydev) +{ + int ret; + + /* SGMII mux enable */ + ret = phy_set_bits_mmd(phydev, MDIO_MMD_VEND1, + LAN887X_SGMII_CTL, + LAN887X_SGMII_CTL_SGMII_MUX_EN); + if (ret < 0) + return ret; + + /* Select MAC_MODE as SGMII */ + ret = phy_modify_mmd(phydev, MDIO_MMD_VEND1, LAN887X_MIS_CFG_REG0, + LAN887X_MIS_CFG_REG0_MAC_MODE_SEL, + LAN887X_MAC_MODE_SGMII); + if (ret < 0) + return ret; + + /* LAN887x Errata: RGMII rx clock active in SGMII mode. + * So disabling it for SGMII mode + */ + ret = phy_set_bits_mmd(phydev, MDIO_MMD_VEND1, LAN887X_MIS_CFG_REG0, + LAN887X_MIS_CFG_REG0_RCLKOUT_DIS); + if (ret < 0) + return ret; + + /* Enable PCS */ + return phy_set_bits_mmd(phydev, MDIO_MMD_VEND1, LAN887X_SGMII_PCS_CFG, + LAN887X_SGMII_PCS_CFG_PCS_ENA); +} + +static int lan887x_config_rgmii_en(struct phy_device *phydev) +{ + int txc; + int rxc; + int ret; + + ret = lan887x_rgmii_init(phydev); + if (ret < 0) + return ret; + + /* Control bit to enable/disable TX DLL delay line in signal path */ + txc = phy_read_mmd(phydev, MDIO_MMD_VEND1, LAN887X_MIS_DLL_CFG_REG0); + if (txc < 0) + return txc; + + /* Control bit to enable/disable RX DLL delay line in signal path */ + rxc = phy_read_mmd(phydev, MDIO_MMD_VEND1, LAN887X_MIS_DLL_CFG_REG1); + if (rxc < 0) + return rxc; + + /* Configures the phy to enable RX/TX delay + * RGMII - TX & RX delays are either added by MAC or not needed, + * phy should not add + * RGMII_ID - Configures phy to enable TX & RX delays, MAC shouldn't add + * RGMII_RX_ID - Configures the PHY to enable the RX delay. + * The MAC shouldn't add the RX delay + * RGMII_TX_ID - Configures the PHY to enable the TX delay. + * The MAC shouldn't add the TX delay in this case + */ + switch (phydev->interface) { + case PHY_INTERFACE_MODE_RGMII: + txc &= ~LAN887X_MIS_DLL_CONF; + rxc &= ~LAN887X_MIS_DLL_CONF; + break; + case PHY_INTERFACE_MODE_RGMII_ID: + txc |= LAN887X_MIS_DLL_CONF; + rxc |= LAN887X_MIS_DLL_CONF; + break; + case PHY_INTERFACE_MODE_RGMII_RXID: + txc &= ~LAN887X_MIS_DLL_CONF; + rxc |= LAN887X_MIS_DLL_CONF; + break; + case PHY_INTERFACE_MODE_RGMII_TXID: + txc |= LAN887X_MIS_DLL_CONF; + rxc &= ~LAN887X_MIS_DLL_CONF; + break; + default: + WARN_ONCE(1, "Invalid phydev interface %d\n", phydev->interface); + return 0; + } + + /* Configures the PHY to enable/disable RX delay in signal path */ + ret = phy_modify_mmd(phydev, MDIO_MMD_VEND1, LAN887X_MIS_DLL_CFG_REG1, + LAN887X_MIS_DLL_CONF, rxc); + if (ret < 0) + return ret; + + /* Configures the PHY to enable/disable the TX delay in signal path */ + return phy_modify_mmd(phydev, MDIO_MMD_VEND1, LAN887X_MIS_DLL_CFG_REG0, + LAN887X_MIS_DLL_CONF, txc); +} + +static int lan887x_config_phy_interface(struct phy_device *phydev) +{ + int interface_mode; + int sgmii_dis; + int ret; + + /* Read sku efuse data for interfaces supported by sku */ + ret = phy_read_mmd(phydev, MDIO_MMD_VEND1, LAN887X_EFUSE_READ_DAT9); + if (ret < 0) + return ret; + + /* If interface_mode is 1 then efuse sets RGMII operations. + * If interface mode is 3 then efuse sets SGMII operations. + */ + interface_mode = ret & LAN887X_EFUSE_READ_DAT9_MAC_MODE; + /* SGMII disable is set for RGMII operations */ + sgmii_dis = ret & LAN887X_EFUSE_READ_DAT9_SGMII_DIS; + + switch (phydev->interface) { + case PHY_INTERFACE_MODE_RGMII: + case PHY_INTERFACE_MODE_RGMII_ID: + case PHY_INTERFACE_MODE_RGMII_RXID: + case PHY_INTERFACE_MODE_RGMII_TXID: + /* Reject RGMII settings for SGMII only sku */ + ret = -EOPNOTSUPP; + + if (!((interface_mode & LAN887X_MAC_MODE_SGMII) == + LAN887X_MAC_MODE_SGMII)) + ret = lan887x_config_rgmii_en(phydev); + break; + case PHY_INTERFACE_MODE_SGMII: + /* Reject SGMII setting for RGMII only sku */ + ret = -EOPNOTSUPP; + + if (!sgmii_dis) + ret = lan887x_sgmii_init(phydev); + break; + default: + /* Reject setting for unsupported interfaces */ + ret = -EOPNOTSUPP; + } + + return ret; +} + +static int lan887x_get_features(struct phy_device *phydev) +{ + int ret; + + ret = genphy_c45_pma_read_abilities(phydev); + if (ret < 0) + return ret; + + /* Enable twisted pair */ + linkmode_set_bit(ETHTOOL_LINK_MODE_TP_BIT, phydev->supported); + + /* First patch only supports 100Mbps and 1000Mbps force-mode. + * T1 Auto-Negotiation (Clause 98 of IEEE 802.3) will be added later. + */ + linkmode_clear_bit(ETHTOOL_LINK_MODE_Autoneg_BIT, phydev->supported); + + return 0; +} + +static int lan887x_phy_init(struct phy_device *phydev) +{ + int ret; + + /* Clear loopback */ + ret = phy_clear_bits_mmd(phydev, MDIO_MMD_VEND1, + LAN887X_MIS_CFG_REG2, + LAN887X_MIS_CFG_REG2_FE_LPBK_EN); + if (ret < 0) + return ret; + + /* Configure default behavior of led to link and activity for any + * speed + */ + ret = phy_modify_mmd(phydev, MDIO_MMD_VEND1, + LAN887X_COMMON_LED3_LED2, + LAN887X_COMMON_LED2_MODE_SEL_MASK, + LAN887X_LED_LINK_ACT_ANY_SPEED); + if (ret < 0) + return ret; + + /* PHY interface setup */ + return lan887x_config_phy_interface(phydev); +} + +static int lan887x_phy_config(struct phy_device *phydev, + const struct lan887x_regwr_map *reg_map, int cnt) +{ + int ret; + + for (int i = 0; i < cnt; i++) { + ret = phy_write_mmd(phydev, reg_map[i].mmd, + reg_map[i].reg, reg_map[i].val); + if (ret < 0) + return ret; + } + + return 0; +} + +static int lan887x_phy_setup(struct phy_device *phydev) +{ + static const struct lan887x_regwr_map phy_cfg[] = { + /* PORT_AFE writes */ + {MDIO_MMD_PMAPMD, LAN887X_ZQCAL_CONTROL_1, 0x4008}, + {MDIO_MMD_PMAPMD, LAN887X_AFE_PORT_TESTBUS_CTRL2, 0x0000}, + {MDIO_MMD_PMAPMD, LAN887X_AFE_PORT_TESTBUS_CTRL6, 0x0040}, + /* 100T1_PCS_VENDOR writes */ + {MDIO_MMD_PCS, LAN887X_IDLE_ERR_CNT_THRESH, 0x0008}, + {MDIO_MMD_PCS, LAN887X_IDLE_ERR_TIMER_WIN, 0x800d}, + /* 100T1 DSP writes */ + {MDIO_MMD_VEND1, LAN887x_CDR_CONFIG1_100, 0x0ab1}, + {MDIO_MMD_VEND1, LAN887x_LOCK1_EQLSR_CONFIG_100, 0x5274}, + {MDIO_MMD_VEND1, LAN887x_SLV_HD_MUFAC_CONFIG_100, 0x0d74}, + {MDIO_MMD_VEND1, LAN887x_PLOCK_MUFAC_CONFIG_100, 0x0aea}, + {MDIO_MMD_VEND1, LAN887x_PROT_DISABLE_100, 0x0360}, + {MDIO_MMD_VEND1, LAN887x_KF_LOOP_SAT_CONFIG_100, 0x0c30}, + /* 1000T1 DSP writes */ + {MDIO_MMD_VEND1, LAN887X_LOCK1_EQLSR_CONFIG, 0x2a78}, + {MDIO_MMD_VEND1, LAN887X_LOCK3_EQLSR_CONFIG, 0x1368}, + {MDIO_MMD_VEND1, LAN887X_PROT_DISABLE, 0x1354}, + {MDIO_MMD_VEND1, LAN887X_FFE_GAIN6, 0x3C84}, + {MDIO_MMD_VEND1, LAN887X_FFE_GAIN7, 0x3ca5}, + {MDIO_MMD_VEND1, LAN887X_FFE_GAIN8, 0x3ca5}, + {MDIO_MMD_VEND1, LAN887X_FFE_GAIN9, 0x3ca5}, + {MDIO_MMD_VEND1, LAN887X_ECHO_DELAY_CONFIG, 0x0024}, + {MDIO_MMD_VEND1, LAN887X_FFE_MAX_CONFIG, 0x227f}, + /* 1000T1 PCS writes */ + {MDIO_MMD_PCS, LAN887X_SCR_CONFIG_3, 0x1e00}, + {MDIO_MMD_PCS, LAN887X_INFO_FLD_CONFIG_5, 0x0fa1}, + }; + + return lan887x_phy_config(phydev, phy_cfg, ARRAY_SIZE(phy_cfg)); +} + +static int lan887x_100M_setup(struct phy_device *phydev) +{ + int ret; + + /* (Re)configure the speed/mode dependent T1 settings */ + if (phydev->master_slave_set == MASTER_SLAVE_CFG_MASTER_FORCE || + phydev->master_slave_set == MASTER_SLAVE_CFG_MASTER_PREFERRED){ + static const struct lan887x_regwr_map phy_cfg[] = { + {MDIO_MMD_PMAPMD, LAN887X_AFE_PORT_TESTBUS_CTRL4, 0x00b8}, + {MDIO_MMD_PMAPMD, LAN887X_TX_AMPLT_1000T1_REG, 0x0038}, + {MDIO_MMD_VEND1, LAN887X_INIT_COEFF_DFE1_100, 0x000f}, + }; + + ret = lan887x_phy_config(phydev, phy_cfg, ARRAY_SIZE(phy_cfg)); + } else { + static const struct lan887x_regwr_map phy_cfg[] = { + {MDIO_MMD_PMAPMD, LAN887X_AFE_PORT_TESTBUS_CTRL4, 0x0038}, + {MDIO_MMD_VEND1, LAN887X_INIT_COEFF_DFE1_100, 0x0014}, + }; + + ret = lan887x_phy_config(phydev, phy_cfg, ARRAY_SIZE(phy_cfg)); + } + if (ret < 0) + return ret; + + return phy_set_bits_mmd(phydev, MDIO_MMD_VEND1, LAN887X_REG_REG26, + LAN887X_REG_REG26_HW_INIT_SEQ_EN); +} + +static int lan887x_1000M_setup(struct phy_device *phydev) +{ + static const struct lan887x_regwr_map phy_cfg[] = { + {MDIO_MMD_PMAPMD, LAN887X_TX_AMPLT_1000T1_REG, 0x003f}, + {MDIO_MMD_PMAPMD, LAN887X_AFE_PORT_TESTBUS_CTRL4, 0x00b8}, + }; + int ret; + + /* (Re)configure the speed/mode dependent T1 settings */ + ret = lan887x_phy_config(phydev, phy_cfg, ARRAY_SIZE(phy_cfg)); + if (ret < 0) + return ret; + + return phy_set_bits_mmd(phydev, MDIO_MMD_PMAPMD, LAN887X_DSP_PMA_CONTROL, + LAN887X_DSP_PMA_CONTROL_LNK_SYNC); +} + +static int lan887x_link_setup(struct phy_device *phydev) +{ + int ret = -EINVAL; + + if (phydev->speed == SPEED_1000) + ret = lan887x_1000M_setup(phydev); + else if (phydev->speed == SPEED_100) + ret = lan887x_100M_setup(phydev); + + return ret; +} + +/* LAN887x Errata: speed configuration changes require soft reset + * and chip soft reset + */ +static int lan887x_phy_reset(struct phy_device *phydev) +{ + int ret, val; + + /* Clear 1000M link sync */ + ret = phy_clear_bits_mmd(phydev, MDIO_MMD_PMAPMD, LAN887X_DSP_PMA_CONTROL, + LAN887X_DSP_PMA_CONTROL_LNK_SYNC); + if (ret < 0) + return ret; + + /* Clear 100M link sync */ + ret = phy_clear_bits_mmd(phydev, MDIO_MMD_VEND1, LAN887X_REG_REG26, + LAN887X_REG_REG26_HW_INIT_SEQ_EN); + if (ret < 0) + return ret; + + /* Chiptop soft-reset to allow the speed/mode change */ + ret = phy_write_mmd(phydev, MDIO_MMD_VEND1, LAN887X_CHIP_SOFT_RST, + LAN887X_CHIP_SOFT_RST_RESET); + if (ret < 0) + return ret; + + /* CL22 soft-reset to let the link re-train */ + ret = phy_modify(phydev, MII_BMCR, BMCR_RESET, BMCR_RESET); + if (ret < 0) + return ret; + + /* Wait for reset complete or timeout if > 10ms */ + return phy_read_poll_timeout(phydev, MII_BMCR, val, !(val & BMCR_RESET), + 5000, 10000, true); +} + +static int lan887x_phy_reconfig(struct phy_device *phydev) +{ + int ret; + + linkmode_zero(phydev->advertising); + + ret = genphy_c45_pma_setup_forced(phydev); + if (ret < 0) + return ret; + + return lan887x_link_setup(phydev); +} + +static int lan887x_config_aneg(struct phy_device *phydev) +{ + int ret; + + /* LAN887x Errata: speed configuration changes require soft reset + * and chip soft reset + */ + ret = lan887x_phy_reset(phydev); + if (ret < 0) + return ret; + + return lan887x_phy_reconfig(phydev); +} + +static int lan887x_probe(struct phy_device *phydev) +{ + struct lan887x_priv *priv; + + priv = devm_kzalloc(&phydev->mdio.dev, sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + phydev->priv = priv; + + return lan887x_phy_setup(phydev); +} + +static u64 lan887x_get_stat(struct phy_device *phydev, int i) +{ + struct lan887x_hw_stat stat = lan887x_hw_stats[i]; + struct lan887x_priv *priv = phydev->priv; + int val; + u64 ret; + + if (stat.mmd) + val = phy_read_mmd(phydev, stat.mmd, stat.reg); + else + val = phy_read(phydev, stat.reg); + + if (val < 0) { + ret = U64_MAX; + } else { + val = val & ((1 << stat.bits) - 1); + priv->stats[i] += val; + ret = priv->stats[i]; + } + + return ret; +} + +static void lan887x_get_stats(struct phy_device *phydev, + struct ethtool_stats *stats, u64 *data) +{ + for (int i = 0; i < ARRAY_SIZE(lan887x_hw_stats); i++) + data[i] = lan887x_get_stat(phydev, i); +} + +static int lan887x_get_sset_count(struct phy_device *phydev) +{ + return ARRAY_SIZE(lan887x_hw_stats); +} + +static void lan887x_get_strings(struct phy_device *phydev, u8 *data) +{ + for (int i = 0; i < ARRAY_SIZE(lan887x_hw_stats); i++) + ethtool_puts(&data, lan887x_hw_stats[i].string); +} + static struct phy_driver microchip_t1_phy_driver[] = { { PHY_ID_MATCH_MODEL(PHY_ID_LAN87XX), @@ -894,6 +1454,20 @@ static struct phy_driver microchip_t1_phy_driver[] = { .get_sqi_max = lan87xx_get_sqi_max, .cable_test_start = lan87xx_cable_test_start, .cable_test_get_status = lan87xx_cable_test_get_status, + }, + { + PHY_ID_MATCH_MODEL(PHY_ID_LAN887X), + .name = "Microchip LAN887x T1 PHY", + .probe = lan887x_probe, + .get_features = lan887x_get_features, + .config_init = lan887x_phy_init, + .config_aneg = lan887x_config_aneg, + .get_stats = lan887x_get_stats, + .get_sset_count = lan887x_get_sset_count, + .get_strings = lan887x_get_strings, + .suspend = genphy_suspend, + .resume = genphy_resume, + .read_status = genphy_c45_read_status, } }; @@ -902,6 +1476,7 @@ module_phy_driver(microchip_t1_phy_driver); static struct mdio_device_id __maybe_unused microchip_t1_tbl[] = { { PHY_ID_MATCH_MODEL(PHY_ID_LAN87XX) }, { PHY_ID_MATCH_MODEL(PHY_ID_LAN937X) }, + { PHY_ID_MATCH_MODEL(PHY_ID_LAN887X) }, { } };