From patchwork Wed Mar 6 07:31:47 2019 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Mike Looijmans X-Patchwork-Id: 10840507 Return-Path: Received: from mail.wl.linuxfoundation.org (pdx-wl-mail.web.codeaurora.org [172.30.200.125]) by pdx-korg-patchwork-2.web.codeaurora.org (Postfix) with ESMTP id 72D4E1575 for ; Wed, 6 Mar 2019 07:31:57 +0000 (UTC) Received: from mail.wl.linuxfoundation.org (localhost [127.0.0.1]) by mail.wl.linuxfoundation.org (Postfix) with ESMTP id 55FD42D138 for ; Wed, 6 Mar 2019 07:31:57 +0000 (UTC) Received: by mail.wl.linuxfoundation.org (Postfix, from userid 486) id 4AB462D144; Wed, 6 Mar 2019 07:31:57 +0000 (UTC) X-Spam-Checker-Version: SpamAssassin 3.3.1 (2010-03-16) on pdx-wl-mail.web.codeaurora.org X-Spam-Level: X-Spam-Status: No, score=-7.9 required=2.0 tests=BAYES_00,MAILING_LIST_MULTI, RCVD_IN_DNSWL_HI autolearn=ham version=3.3.1 Received: from vger.kernel.org (vger.kernel.org [209.132.180.67]) by mail.wl.linuxfoundation.org (Postfix) with ESMTP id D7D8D2D138 for ; Wed, 6 Mar 2019 07:31:56 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1729197AbfCFHb4 (ORCPT ); Wed, 6 Mar 2019 02:31:56 -0500 Received: from jax4mhob15.registeredsite.com ([64.69.218.103]:35996 "EHLO jax4mhob15.registeredsite.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1729183AbfCFHb4 (ORCPT ); Wed, 6 Mar 2019 02:31:56 -0500 Received: from mailpod.hostingplatform.com ([10.30.71.203]) by jax4mhob15.registeredsite.com (8.14.4/8.14.4) with ESMTP id x267Vrhu171180 (version=TLSv1/SSLv3 cipher=DHE-RSA-AES256-GCM-SHA384 bits=256 verify=FAIL) for ; Wed, 6 Mar 2019 02:31:54 -0500 Received: (qmail 3948 invoked by uid 0); 6 Mar 2019 07:31:53 -0000 X-TCPREMOTEIP: 81.173.50.109 X-Authenticated-UID: mike@milosoftware.com Received: from unknown (HELO mikebuntu.TOPIC.LOCAL) (mike@milosoftware.com@81.173.50.109) by 0 with ESMTPA; 6 Mar 2019 07:31:53 -0000 From: Mike Looijmans To: linux-iio@vger.kernel.org, himanshujha199640@gmail.com Cc: linux-kernel@vger.kernel.org, jic23@kernel.org, knaack.h@gmx.de, lars@metafoo.de, pmeerw@pmeerw.net, dpfrey@gmail.com, colin.king@canonical.com, Mike Looijmans Subject: [PATCH v3 1/2] iio/chemical/bme680: Report temperature in millidegrees Date: Wed, 6 Mar 2019 08:31:47 +0100 Message-Id: <1551857508-4254-1-git-send-email-mike.looijmans@topic.nl> X-Mailer: git-send-email 1.9.1 References: <1550238475-25698-1-git-send-email-mike.looijmans@topic.nl> In-Reply-To: <1550238475-25698-1-git-send-email-mike.looijmans@topic.nl> Sender: linux-iio-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-iio@vger.kernel.org X-Virus-Scanned: ClamAV using ClamSMTP The standard unit for temperature is millidegrees Celcius. Adapt the driver to report in millidegrees instead of degrees. Signed-off-by: Mike Looijmans --- v2: Remove unused 'addr7' variable v3: Split patch into temperature and SPI drivers/iio/chemical/bme680_core.c | 16 +++++++--------- 1 file changed, 7 insertions(+), 9 deletions(-) diff --git a/drivers/iio/chemical/bme680_core.c b/drivers/iio/chemical/bme680_core.c index 70c1fe4..fefe32b 100644 --- a/drivers/iio/chemical/bme680_core.c +++ b/drivers/iio/chemical/bme680_core.c @@ -583,8 +583,7 @@ static int bme680_gas_config(struct bme680_data *data) return ret; } -static int bme680_read_temp(struct bme680_data *data, - int *val, int *val2) +static int bme680_read_temp(struct bme680_data *data, int *val) { struct device *dev = regmap_get_device(data->regmap); int ret; @@ -617,10 +616,9 @@ static int bme680_read_temp(struct bme680_data *data, * compensate_press/compensate_humid to get compensated * pressure/humidity readings. */ - if (val && val2) { - *val = comp_temp; - *val2 = 100; - return IIO_VAL_FRACTIONAL; + if (val) { + *val = comp_temp * 10; /* Centidegrees to millidegrees */ + return IIO_VAL_INT; } return ret; @@ -635,7 +633,7 @@ static int bme680_read_press(struct bme680_data *data, s32 adc_press; /* Read and compensate temperature to get a reading of t_fine */ - ret = bme680_read_temp(data, NULL, NULL); + ret = bme680_read_temp(data, NULL); if (ret < 0) return ret; @@ -668,7 +666,7 @@ static int bme680_read_humid(struct bme680_data *data, u32 comp_humidity; /* Read and compensate temperature to get a reading of t_fine */ - ret = bme680_read_temp(data, NULL, NULL); + ret = bme680_read_temp(data, NULL); if (ret < 0) return ret; @@ -761,7 +759,7 @@ static int bme680_read_raw(struct iio_dev *indio_dev, case IIO_CHAN_INFO_PROCESSED: switch (chan->type) { case IIO_TEMP: - return bme680_read_temp(data, val, val2); + return bme680_read_temp(data, val); case IIO_PRESSURE: return bme680_read_press(data, val, val2); case IIO_HUMIDITYRELATIVE: From patchwork Wed Mar 6 07:31:48 2019 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Mike Looijmans X-Patchwork-Id: 10840509 Return-Path: Received: from mail.wl.linuxfoundation.org (pdx-wl-mail.web.codeaurora.org [172.30.200.125]) by pdx-korg-patchwork-2.web.codeaurora.org (Postfix) with ESMTP id 1EAF11575 for ; Wed, 6 Mar 2019 07:32:04 +0000 (UTC) Received: from mail.wl.linuxfoundation.org (localhost [127.0.0.1]) by mail.wl.linuxfoundation.org (Postfix) with ESMTP id 033E82D128 for ; Wed, 6 Mar 2019 07:32:04 +0000 (UTC) Received: by mail.wl.linuxfoundation.org (Postfix, from userid 486) id EB84B2D15C; Wed, 6 Mar 2019 07:32:03 +0000 (UTC) X-Spam-Checker-Version: SpamAssassin 3.3.1 (2010-03-16) on pdx-wl-mail.web.codeaurora.org X-Spam-Level: X-Spam-Status: No, score=-7.9 required=2.0 tests=BAYES_00,MAILING_LIST_MULTI, RCVD_IN_DNSWL_HI autolearn=ham version=3.3.1 Received: from vger.kernel.org (vger.kernel.org [209.132.180.67]) by mail.wl.linuxfoundation.org (Postfix) with ESMTP id 2D06F2D143 for ; Wed, 6 Mar 2019 07:32:03 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1729292AbfCFHcA (ORCPT ); Wed, 6 Mar 2019 02:32:00 -0500 Received: from jax4mhob24.registeredsite.com ([64.69.218.112]:50814 "EHLO jax4mhob24.registeredsite.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1728438AbfCFHcA (ORCPT ); Wed, 6 Mar 2019 02:32:00 -0500 Received: from mailpod.hostingplatform.com ([10.30.71.203]) by jax4mhob24.registeredsite.com (8.14.4/8.14.4) with ESMTP id x267VvqN133239 (version=TLSv1/SSLv3 cipher=DHE-RSA-AES256-GCM-SHA384 bits=256 verify=FAIL) for ; Wed, 6 Mar 2019 02:31:57 -0500 Received: (qmail 4212 invoked by uid 0); 6 Mar 2019 07:31:57 -0000 X-TCPREMOTEIP: 81.173.50.109 X-Authenticated-UID: mike@milosoftware.com Received: from unknown (HELO mikebuntu.TOPIC.LOCAL) (mike@milosoftware.com@81.173.50.109) by 0 with ESMTPA; 6 Mar 2019 07:31:56 -0000 From: Mike Looijmans To: linux-iio@vger.kernel.org, himanshujha199640@gmail.com Cc: linux-kernel@vger.kernel.org, jic23@kernel.org, knaack.h@gmx.de, lars@metafoo.de, pmeerw@pmeerw.net, dpfrey@gmail.com, colin.king@canonical.com, Mike Looijmans Subject: [PATCH v3 2/2] iio/chemical/bme680: Fix SPI read interface Date: Wed, 6 Mar 2019 08:31:48 +0100 Message-Id: <1551857508-4254-2-git-send-email-mike.looijmans@topic.nl> X-Mailer: git-send-email 1.9.1 In-Reply-To: <1551857508-4254-1-git-send-email-mike.looijmans@topic.nl> References: <1551857508-4254-1-git-send-email-mike.looijmans@topic.nl> References: <1550238475-25698-1-git-send-email-mike.looijmans@topic.nl> In-Reply-To: <1550238475-25698-1-git-send-email-mike.looijmans@topic.nl> Sender: linux-iio-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-iio@vger.kernel.org X-Virus-Scanned: ClamAV using ClamSMTP The SPI interface implementation was completely broken. When using the SPI interface, there are only 7 address bits, the upper bit is controlled by a page select register. The core needs access to both ranges, so implement register read/write for both regions. The regmap paging functionality didn't agree with a register that needs to be read and modified, so I implemented a custom paging algorithm. This fixes that the device wouldn't even probe in SPI mode. The SPI interface then isn't different from I2C, merged them into the core, and the I2C/SPI named registers are no longer needed. Implemented register value caching for the registers to reduce the I2C/SPI data transfers considerably. The calibration set reads as all zeroes until some undefined point in time, and I couldn't determine what makes it valid. The datasheet mentions these registers but does not provide any hints on when they become valid, and they aren't even enumerated in the memory map. So check the calibration and retry reading it from the device after each measurement until it provides something valid. Signed-off-by: Mike Looijmans --- v2: Remove unused 'addr7' variable v3: Split patch into temperature and SPI drivers/iio/chemical/bme680.h | 6 +- drivers/iio/chemical/bme680_core.c | 38 ++++++++++++ drivers/iio/chemical/bme680_i2c.c | 21 ------- drivers/iio/chemical/bme680_spi.c | 115 +++++++++++++++++++++++++------------ 4 files changed, 118 insertions(+), 62 deletions(-) diff --git a/drivers/iio/chemical/bme680.h b/drivers/iio/chemical/bme680.h index 0ae89b87..4edc5d21 100644 --- a/drivers/iio/chemical/bme680.h +++ b/drivers/iio/chemical/bme680.h @@ -2,11 +2,9 @@ #ifndef BME680_H_ #define BME680_H_ -#define BME680_REG_CHIP_I2C_ID 0xD0 -#define BME680_REG_CHIP_SPI_ID 0x50 +#define BME680_REG_CHIP_ID 0xD0 #define BME680_CHIP_ID_VAL 0x61 -#define BME680_REG_SOFT_RESET_I2C 0xE0 -#define BME680_REG_SOFT_RESET_SPI 0x60 +#define BME680_REG_SOFT_RESET 0xE0 #define BME680_CMD_SOFTRESET 0xB6 #define BME680_REG_STATUS 0x73 #define BME680_SPI_MEM_PAGE_BIT BIT(4) diff --git a/drivers/iio/chemical/bme680_core.c b/drivers/iio/chemical/bme680_core.c index fefe32b..ccde4c6 100644 --- a/drivers/iio/chemical/bme680_core.c +++ b/drivers/iio/chemical/bme680_core.c @@ -63,9 +63,23 @@ struct bme680_data { s32 t_fine; }; +static const struct regmap_range bme680_volatile_ranges[] = { + regmap_reg_range(BME680_REG_MEAS_STAT_0, BME680_REG_GAS_R_LSB), + regmap_reg_range(BME680_REG_STATUS, BME680_REG_STATUS), + regmap_reg_range(BME680_T2_LSB_REG, BME680_GH3_REG), +}; + +static const struct regmap_access_table bme680_volatile_table = { + .yes_ranges = bme680_volatile_ranges, + .n_yes_ranges = ARRAY_SIZE(bme680_volatile_ranges), +}; + const struct regmap_config bme680_regmap_config = { .reg_bits = 8, .val_bits = 8, + .max_register = 0xef, + .volatile_table = &bme680_volatile_table, + .cache_type = REGCACHE_RBTREE, }; EXPORT_SYMBOL(bme680_regmap_config); @@ -316,6 +330,10 @@ static s16 bme680_compensate_temp(struct bme680_data *data, s64 var1, var2, var3; s16 calc_temp; + /* If the calibration is invalid, attempt to reload it */ + if (!calib->par_t2) + bme680_read_calib(data, calib); + var1 = (adc_temp >> 3) - (calib->par_t1 << 1); var2 = (var1 * calib->par_t2) >> 11; var3 = ((var1 >> 1) * (var1 >> 1)) >> 12; @@ -865,8 +883,28 @@ int bme680_core_probe(struct device *dev, struct regmap *regmap, { struct iio_dev *indio_dev; struct bme680_data *data; + unsigned int val; int ret; + ret = regmap_write(regmap, BME680_REG_SOFT_RESET, + BME680_CMD_SOFTRESET); + if (ret < 0) { + dev_err(dev, "Failed to reset chip\n"); + return ret; + } + + ret = regmap_read(regmap, BME680_REG_CHIP_ID, &val); + if (ret < 0) { + dev_err(dev, "Error reading chip ID\n"); + return ret; + } + + if (val != BME680_CHIP_ID_VAL) { + dev_err(dev, "Wrong chip ID, got %x expected %x\n", + val, BME680_CHIP_ID_VAL); + return -ENODEV; + } + indio_dev = devm_iio_device_alloc(dev, sizeof(*data)); if (!indio_dev) return -ENOMEM; diff --git a/drivers/iio/chemical/bme680_i2c.c b/drivers/iio/chemical/bme680_i2c.c index 06d4be5..cfc4449 100644 --- a/drivers/iio/chemical/bme680_i2c.c +++ b/drivers/iio/chemical/bme680_i2c.c @@ -23,8 +23,6 @@ static int bme680_i2c_probe(struct i2c_client *client, { struct regmap *regmap; const char *name = NULL; - unsigned int val; - int ret; regmap = devm_regmap_init_i2c(client, &bme680_regmap_config); if (IS_ERR(regmap)) { @@ -33,25 +31,6 @@ static int bme680_i2c_probe(struct i2c_client *client, return PTR_ERR(regmap); } - ret = regmap_write(regmap, BME680_REG_SOFT_RESET_I2C, - BME680_CMD_SOFTRESET); - if (ret < 0) { - dev_err(&client->dev, "Failed to reset chip\n"); - return ret; - } - - ret = regmap_read(regmap, BME680_REG_CHIP_I2C_ID, &val); - if (ret < 0) { - dev_err(&client->dev, "Error reading I2C chip ID\n"); - return ret; - } - - if (val != BME680_CHIP_ID_VAL) { - dev_err(&client->dev, "Wrong chip ID, got %x expected %x\n", - val, BME680_CHIP_ID_VAL); - return -ENODEV; - } - if (id) name = id->name; diff --git a/drivers/iio/chemical/bme680_spi.c b/drivers/iio/chemical/bme680_spi.c index c9fb05e..881778e 100644 --- a/drivers/iio/chemical/bme680_spi.c +++ b/drivers/iio/chemical/bme680_spi.c @@ -11,28 +11,93 @@ #include "bme680.h" +struct bme680_spi_bus_context { + struct spi_device *spi; + u8 current_page; +}; + +/* + * In SPI mode there are only 7 address bits, a "page" register determines + * which part of the 8-bit range is active. This function looks at the address + * and writes the page selection bit if needed + */ +static int bme680_regmap_spi_select_page( + struct bme680_spi_bus_context *ctx, u8 reg) +{ + struct spi_device *spi = ctx->spi; + int ret; + u8 buf[2]; + u8 page = (reg & 0x80) ? 0 : 1; /* Page "1" is low range */ + + if (page == ctx->current_page) + return 0; + + /* + * Data sheet claims we're only allowed to change bit 4, so we must do + * a read-modify-write on each and every page select + */ + buf[0] = BME680_REG_STATUS; + ret = spi_write_then_read(spi, buf, 1, buf + 1, 1); + if (ret < 0) { + dev_err(&spi->dev, "failed to set page %u\n", page); + return ret; + } + + buf[0] = BME680_REG_STATUS; + if (page) + buf[1] |= BME680_SPI_MEM_PAGE_BIT; + else + buf[1] &= ~BME680_SPI_MEM_PAGE_BIT; + + ret = spi_write(spi, buf, 2); + if (ret < 0) { + dev_err(&spi->dev, "failed to set page %u\n", page); + return ret; + } + + ctx->current_page = page; + + return 0; +} + static int bme680_regmap_spi_write(void *context, const void *data, size_t count) { - struct spi_device *spi = context; + struct bme680_spi_bus_context *ctx = context; + struct spi_device *spi = ctx->spi; + int ret; u8 buf[2]; memcpy(buf, data, 2); + + ret = bme680_regmap_spi_select_page(ctx, buf[0]); + if (ret) + return ret; + /* * The SPI register address (= full register address without bit 7) * and the write command (bit7 = RW = '0') */ buf[0] &= ~0x80; - return spi_write_then_read(spi, buf, 2, NULL, 0); + return spi_write(spi, buf, 2); } static int bme680_regmap_spi_read(void *context, const void *reg, size_t reg_size, void *val, size_t val_size) { - struct spi_device *spi = context; + struct bme680_spi_bus_context *ctx = context; + struct spi_device *spi = ctx->spi; + int ret; + u8 addr = *(const u8 *)reg; + + ret = bme680_regmap_spi_select_page(ctx, addr); + if (ret) + return ret; - return spi_write_then_read(spi, reg, reg_size, val, val_size); + addr |= 0x80; /* bit7 = RW = '1' */ + + return spi_write_then_read(spi, &addr, 1, val, val_size); } static struct regmap_bus bme680_regmap_bus = { @@ -45,8 +110,8 @@ static int bme680_regmap_spi_read(void *context, const void *reg, static int bme680_spi_probe(struct spi_device *spi) { const struct spi_device_id *id = spi_get_device_id(spi); + struct bme680_spi_bus_context *bus_context; struct regmap *regmap; - unsigned int val; int ret; spi->bits_per_word = 8; @@ -56,45 +121,21 @@ static int bme680_spi_probe(struct spi_device *spi) return ret; } + bus_context = devm_kzalloc(&spi->dev, sizeof(*bus_context), GFP_KERNEL); + if (!bus_context) + return -ENOMEM; + + bus_context->spi = spi; + bus_context->current_page = 0xff; /* Undefined on warm boot */ + regmap = devm_regmap_init(&spi->dev, &bme680_regmap_bus, - &spi->dev, &bme680_regmap_config); + bus_context, &bme680_regmap_config); if (IS_ERR(regmap)) { dev_err(&spi->dev, "Failed to register spi regmap %d\n", (int)PTR_ERR(regmap)); return PTR_ERR(regmap); } - ret = regmap_write(regmap, BME680_REG_SOFT_RESET_SPI, - BME680_CMD_SOFTRESET); - if (ret < 0) { - dev_err(&spi->dev, "Failed to reset chip\n"); - return ret; - } - - /* after power-on reset, Page 0(0x80-0xFF) of spi_mem_page is active */ - ret = regmap_read(regmap, BME680_REG_CHIP_SPI_ID, &val); - if (ret < 0) { - dev_err(&spi->dev, "Error reading SPI chip ID\n"); - return ret; - } - - if (val != BME680_CHIP_ID_VAL) { - dev_err(&spi->dev, "Wrong chip ID, got %x expected %x\n", - val, BME680_CHIP_ID_VAL); - return -ENODEV; - } - /* - * select Page 1 of spi_mem_page to enable access to - * to registers from address 0x00 to 0x7F. - */ - ret = regmap_write_bits(regmap, BME680_REG_STATUS, - BME680_SPI_MEM_PAGE_BIT, - BME680_SPI_MEM_PAGE_1_VAL); - if (ret < 0) { - dev_err(&spi->dev, "failed to set page 1 of spi_mem_page\n"); - return ret; - } - return bme680_core_probe(&spi->dev, regmap, id->name); }