From patchwork Fri Aug 23 02:29:17 2024 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Xianwei Zhao via B4 Relay X-Patchwork-Id: 13774508 Received: from smtp.kernel.org (aws-us-west-2-korg-mail-1.web.codeaurora.org [10.30.226.201]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.subspace.kernel.org (Postfix) with ESMTPS id 6A406224E8; Fri, 23 Aug 2024 02:29:20 +0000 (UTC) Authentication-Results: smtp.subspace.kernel.org; arc=none smtp.client-ip=10.30.226.201 ARC-Seal: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1724380160; cv=none; b=T270EOcixXx+2oSSkAQ7PjTR+OT46XTS6UXREAnpVMjjTLEeK2kkSsKVPHezPtDKF7ZFQ1MdUx2X9RiSHI8ooYPLH5RkDhZApT1EEuMWVYNUValvjssVLHnJWYcEQFnfVix2MNcZQPP/lIJV4bcl38W1ywgXlg2SqXKeCr9l6MQ= ARC-Message-Signature: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1724380160; c=relaxed/simple; bh=j0bfX7RwioxZel71Y7a7ItvYplwaW9cdPPAEsz+h/o4=; h=From:Date:Subject:MIME-Version:Content-Type:Message-Id:References: In-Reply-To:To:Cc; b=nNgX2OSZWS1cUQlu7jIIg5DqkpleYF46+crvG5HPcSJnaaz7PQOqtsZHtdrg6LVGXNJBAiWgvBWI03tyAuYM0Ah1za0AFnORMocHRoQt9K08ioVQrwijevnHKJAgCjnGaIxZiRu724zlzgntNA0zPARRfCl5PZ9l7zK+XBM0Mgc= ARC-Authentication-Results: i=1; smtp.subspace.kernel.org; dkim=pass (2048-bit key) header.d=kernel.org header.i=@kernel.org header.b=HuyefCcx; arc=none smtp.client-ip=10.30.226.201 Authentication-Results: smtp.subspace.kernel.org; dkim=pass (2048-bit key) header.d=kernel.org header.i=@kernel.org header.b="HuyefCcx" Received: by smtp.kernel.org (Postfix) with ESMTPS id 0FE1CC32782; Fri, 23 Aug 2024 02:29:20 +0000 (UTC) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/simple; d=kernel.org; s=k20201202; t=1724380160; bh=j0bfX7RwioxZel71Y7a7ItvYplwaW9cdPPAEsz+h/o4=; h=From:Date:Subject:References:In-Reply-To:To:Cc:Reply-To:From; b=HuyefCcxv8nRuagOUejt7Jb/i+NuVRF06X+W1VV0nG1fCE/krTmPqYxqNv5MPt9jc r9yir9VOerBW6qGaLgkMZaMNJqt6zQe2Ssjf0Ea/DHSsGPzRplSBVfvoAXwWq1PIoV 0lQmE5xWP6O9TyJhyRfbr47H7OMEFUsvnwyt2ihAQErH1w7Wf3i9QMfVbigKvGzzve +Xj7AELqgLtU8IAGqDkwqXyRQKUgxj8F1VgLKEhB+4v4gBLXlXVCgmdLNGslViRFyy I8EOMv9IAiJfktCyTg+VderPOjN/j7ksSNFJ3x0103oE6//miuhBEurW4EoviyAd55 d1Jz+FAgVfUpA== Received: from aws-us-west-2-korg-lkml-1.web.codeaurora.org (localhost.localdomain [127.0.0.1]) by smtp.lore.kernel.org (Postfix) with ESMTP id F2A0DC5320E; Fri, 23 Aug 2024 02:29:19 +0000 (UTC) From: Xianwei Zhao via B4 Relay Date: Fri, 23 Aug 2024 10:29:17 +0800 Subject: [PATCH v3 1/3] dt-bindings: clock: fix C3 PLL input parameter Precedence: bulk X-Mailing-List: linux-clk@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 Message-Id: <20240823-c3_add_node-v3-1-3648376037f4@amlogic.com> References: <20240823-c3_add_node-v3-0-3648376037f4@amlogic.com> In-Reply-To: <20240823-c3_add_node-v3-0-3648376037f4@amlogic.com> To: Neil Armstrong , Jerome Brunet , Michael Turquette , Stephen Boyd , Rob Herring , Krzysztof Kozlowski , Conor Dooley , Chuan Liu , Kevin Hilman , Martin Blumenstingl Cc: Krzysztof Kozlowski , linux-amlogic@lists.infradead.org, linux-clk@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-arm-kernel@lists.infradead.org, Xianwei Zhao X-Mailer: b4 0.12.4 X-Developer-Signature: v=1; a=ed25519-sha256; t=1724380157; l=2021; i=xianwei.zhao@amlogic.com; s=20231208; h=from:subject:message-id; bh=EZulQ5wpUmaV7Lvp/UM+s8rjmGBRsUnekPSl5hxqIH4=; b=FOnaCsVmFwP8l5psqP1H2cZPbDXq0jdUvEUdjL9j5DJUURUcRcy8Y2qd2a3skK7/OJNh6+MoY lLPcgN1Pwu3Bi6FkCe54El0cDTX5XloX/aY/FZLe2wChfrtFW/DlY3R X-Developer-Key: i=xianwei.zhao@amlogic.com; a=ed25519; pk=o4fDH8ZXL6xQg5h17eNzRljf6pwZHWWjqcOSsj3dW24= X-Endpoint-Received: by B4 Relay for xianwei.zhao@amlogic.com/20231208 with auth_id=107 X-Original-From: Xianwei Zhao Reply-To: xianwei.zhao@amlogic.com From: Xianwei Zhao Add C3 PLL controller input clock parameters "fix". The clock named "fix" was initially implemented in PLL clock controller driver. However, some registers required secure zone access, so we moved it to the secure zone (BL31) and accessed it through SCMI. Since the PLL clock driver needs to use this clock, the "fix" clock is used as an input source. We updated the driver but forgot to modify the binding accordingly, so we are adding it here. It is an ABI break but on a new and immature platform. Noboby could really use that platform at this stage, so nothing is going to break on anyone really. Fixes: 0e6be855a96d ("dt-bindings: clock: add Amlogic C3 PLL clock controller") Reviewed-by: Krzysztof Kozlowski Signed-off-by: Xianwei Zhao --- Documentation/devicetree/bindings/clock/amlogic,c3-pll-clkc.yaml | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/Documentation/devicetree/bindings/clock/amlogic,c3-pll-clkc.yaml b/Documentation/devicetree/bindings/clock/amlogic,c3-pll-clkc.yaml index 43de3c6fc1cf..700865cc9792 100644 --- a/Documentation/devicetree/bindings/clock/amlogic,c3-pll-clkc.yaml +++ b/Documentation/devicetree/bindings/clock/amlogic,c3-pll-clkc.yaml @@ -24,11 +24,13 @@ properties: items: - description: input top pll - description: input mclk pll + - description: input fix pll clock-names: items: - const: top - const: mclk + - const: fix "#clock-cells": const: 1 @@ -52,8 +54,9 @@ examples: compatible = "amlogic,c3-pll-clkc"; reg = <0x0 0x8000 0x0 0x1a4>; clocks = <&scmi_clk 2>, - <&scmi_clk 5>; - clock-names = "top", "mclk"; + <&scmi_clk 5>, + <&scmi_clk 12>; + clock-names = "top", "mclk", "fix"; #clock-cells = <1>; }; }; From patchwork Fri Aug 23 02:29:18 2024 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Xianwei Zhao via B4 Relay X-Patchwork-Id: 13774510 Received: from smtp.kernel.org (aws-us-west-2-korg-mail-1.web.codeaurora.org [10.30.226.201]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.subspace.kernel.org (Postfix) with ESMTPS id 7D5B62940F; Fri, 23 Aug 2024 02:29:20 +0000 (UTC) Authentication-Results: smtp.subspace.kernel.org; arc=none smtp.client-ip=10.30.226.201 ARC-Seal: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1724380160; cv=none; b=LPkNXTIZPXHQBbSsk42L6lP+hqz+IyuwRzicG44SpC9ZwQRpLE1g8YGjp2Ap3t5vX8gFW6c9y6yF8R74/6OTWU05Qs4Rw0nb4OmR7zA1AwRHEjyQv4eUHy7SfCif5/EHpx075XcN1g3slMFXStJI6sOFS8RK4rlMzDwsK48Xih4= ARC-Message-Signature: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1724380160; c=relaxed/simple; bh=0GgRviu8k9EyODPl363s8n6v5HyeD0pAEjKKqX9dcZY=; h=From:Date:Subject:MIME-Version:Content-Type:Message-Id:References: In-Reply-To:To:Cc; b=nTHne1DqHIpZpi/34V4E+yz0sC1/4Ebi4Yi/H47LWgifMW2zO03WoFB8faAdzV8t/wVL8l3WEIA0ABd7hc+vK2AZIwj8wYfDW2jHwvBqo29LErlhaXuZqqTRszv6kFXvKw34NrybSCIibEmOQ+aE96WIxsaX0leIvxAT7VEHXbY= ARC-Authentication-Results: i=1; smtp.subspace.kernel.org; dkim=pass (2048-bit key) header.d=kernel.org header.i=@kernel.org header.b=I6vgLvjh; arc=none smtp.client-ip=10.30.226.201 Authentication-Results: smtp.subspace.kernel.org; dkim=pass (2048-bit key) header.d=kernel.org header.i=@kernel.org header.b="I6vgLvjh" Received: by smtp.kernel.org (Postfix) with ESMTPS id 1C03EC4AF0B; Fri, 23 Aug 2024 02:29:20 +0000 (UTC) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/simple; d=kernel.org; s=k20201202; t=1724380160; bh=0GgRviu8k9EyODPl363s8n6v5HyeD0pAEjKKqX9dcZY=; h=From:Date:Subject:References:In-Reply-To:To:Cc:Reply-To:From; b=I6vgLvjh+Pe88jUeJWO6IhlQ6mU05TmGViQ+f/cKfeKQPGLU1YVe6E5V6EqR3VgpK 8CMRNJTP/Je41FxNCgyzXOLOc8fEMBFkSIO7UT6Rxl373JRcLchmlGnTwlHKwhoVvP GUzu/Qwl/xcKiLez5qSKo8GhkA62PBWz2LeCKDfVmvI3X782eAJcAgTS7bOf24cqHa GtCoRDMA83LFYxwQl5yY0QIp49Eb5ORNhvKC+W281jL+URZ+aAexafyCOFYRTNKl6j 3MwRV9PL+4ZgHQL+nmrz50+pZd3cWLAv6RV0C/YMMzBsL4qALCJZNHkG5BhZIfznD9 +wm+7WqH9LXZg== Received: from aws-us-west-2-korg-lkml-1.web.codeaurora.org (localhost.localdomain [127.0.0.1]) by smtp.lore.kernel.org (Postfix) with ESMTP id 0D618C5472C; Fri, 23 Aug 2024 02:29:20 +0000 (UTC) From: Xianwei Zhao via B4 Relay Date: Fri, 23 Aug 2024 10:29:18 +0800 Subject: [PATCH v3 2/3] arm64: dts: amlogic: add some device nodes for C3 Precedence: bulk X-Mailing-List: linux-clk@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 Message-Id: <20240823-c3_add_node-v3-2-3648376037f4@amlogic.com> References: <20240823-c3_add_node-v3-0-3648376037f4@amlogic.com> In-Reply-To: <20240823-c3_add_node-v3-0-3648376037f4@amlogic.com> To: Neil Armstrong , Jerome Brunet , Michael Turquette , Stephen Boyd , Rob Herring , Krzysztof Kozlowski , Conor Dooley , Chuan Liu , Kevin Hilman , Martin Blumenstingl Cc: Krzysztof Kozlowski , linux-amlogic@lists.infradead.org, linux-clk@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-arm-kernel@lists.infradead.org, Xianwei Zhao X-Mailer: b4 0.12.4 X-Developer-Signature: v=1; a=ed25519-sha256; t=1724380157; l=20724; i=xianwei.zhao@amlogic.com; s=20231208; h=from:subject:message-id; bh=dsQVWxfQbLUxQuq8Qzfv2rSWZAKhdGP81weSsFXwtv4=; b=rQ3dhSywdQfM3KLaFpMRzdSoEK+abIrm5EYm9H1RCe3+lMSsfUoh98Ae30bpHOJY1T49BWrXh zTRHeqYs4uzBl35Yb14oXY5yxBhLzfMxCZqh8K2GHxG+EHMOR3SzSVr X-Developer-Key: i=xianwei.zhao@amlogic.com; a=ed25519; pk=o4fDH8ZXL6xQg5h17eNzRljf6pwZHWWjqcOSsj3dW24= X-Endpoint-Received: by B4 Relay for xianwei.zhao@amlogic.com/20231208 with auth_id=107 X-Original-From: Xianwei Zhao Reply-To: xianwei.zhao@amlogic.com From: Xianwei Zhao Add some device nodes for SoC C3, including periphs clock controller node, PLL clock controller node, SPICC node, regulator node, NAND controller node, sdcard node, Ethernet MAC and PHY node. The sdacrd depends on regulator and pinctrl(select), so some property fields are placed at the board level. The nand chip is placed on the board, So some property fields about SPIFC and NAND controller node are placed at the board level. THe Ethernet MAC support outchip PHY, so place this property field(select PHY) at the board level. Signed-off-by: Xianwei Zhao --- .../boot/dts/amlogic/amlogic-c3-c302x-aw409.dts | 233 ++++++++++ arch/arm64/boot/dts/amlogic/amlogic-c3.dtsi | 488 ++++++++++++++++++++- 2 files changed, 720 insertions(+), 1 deletion(-) diff --git a/arch/arm64/boot/dts/amlogic/amlogic-c3-c302x-aw409.dts b/arch/arm64/boot/dts/amlogic/amlogic-c3-c302x-aw409.dts index edce8850b338..b8d2037afc00 100644 --- a/arch/arm64/boot/dts/amlogic/amlogic-c3-c302x-aw409.dts +++ b/arch/arm64/boot/dts/amlogic/amlogic-c3-c302x-aw409.dts @@ -16,14 +16,247 @@ / { aliases { serial0 = &uart_b; + spi0 = &spifc; }; memory@0 { device_type = "memory"; reg = <0x0 0x0 0x0 0x10000000>; }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + /* 9 MiB reserved for ARM Trusted Firmware */ + secmon_reserved: secmon@7f00000 { + compatible = "shared-dma-pool"; + reg = <0x0 0x07f00000 0x0 0x900000>; + no-map; + }; + }; + + main_12v: regulator-main-12v { + compatible = "regulator-fixed"; + regulator-name = "12V"; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + regulator-boot-on; + regulator-always-on; + }; + + vcc_5v: regulator-vcc-5v { + compatible = "regulator-fixed"; + regulator-name = "VCC5V"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&main_12v>; + regulator-boot-on; + regulator-always-on; + }; + + vddq: regulator-vddq { + compatible = "regulator-fixed"; + regulator-name = "VDDQ"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + vin-supply = <&main_12v>; + regulator-boot-on; + regulator-always-on; + }; + + vddao_3v3: regulator-vddao-3v3 { + compatible = "regulator-fixed"; + regulator-name = "VDDAO3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&main_12v>; + regulator-boot-on; + regulator-always-on; + }; + + vddao_1v8: regulator-vddao-1v8 { + compatible = "regulator-fixed"; + regulator-name = "VDDAO1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&vddao_3v3>; + regulator-boot-on; + regulator-always-on; + }; + + ddr4_2v5: regulator-ddr4-2v5 { + compatible = "regulator-fixed"; + regulator-name = "DDR4_2V5"; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + vin-supply = <&vddao_3v3>; + regulator-boot-on; + regulator-always-on; + }; + + vcc_3v3: regulator-vcc-3v3 { + compatible = "regulator-fixed"; + regulator-name = "VCC3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vddao_3v3>; + regulator-boot-on; + regulator-always-on; + }; + + vcc_1v8: regulator-vcc-1v8 { + compatible = "regulator-fixed"; + regulator-name = "VCC1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&vcc_3v3>; + regulator-boot-on; + regulator-always-on; + }; + + vdd_1v8: regulator-vdd-1v8 { + compatible = "regulator-fixed"; + regulator-name = "VDD1V8_BOOT"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&vcc_3v3>; + regulator-boot-on; + regulator-always-on; + }; + + vddio_b: regulator-vddio-3v3-b { + compatible = "regulator-fixed"; + regulator-name = "VDDIO_B"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vcc_3v3>; + regulator-boot-on; + regulator-always-on; + }; + + sdcard: regulator-sdcard { + compatible = "regulator-fixed"; + regulator-name = "SDCARD_POWER"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vddao_3v3>; + gpio = <&gpio GPIOA_4 GPIO_ACTIVE_LOW>; + regulator-boot-on; + regulator-always-on; + }; }; &uart_b { status = "okay"; }; + +&nand { + status = "okay"; + #address-cells = <1>; + #size-cells = <0>; + + pinctrl-0 = <&nand_pins>; + pinctrl-names = "default"; + + nand@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <1>; + nand-on-flash-bbt; + + partition@0 { + label = "boot"; + reg = <0x0 0x00200000>; + }; + partition@200000 { + label = "env"; + reg = <0x00200000 0x00400000>; + }; + partition@600000 { + label = "system"; + reg = <0x00600000 0x00a00000>; + }; + partition@1000000 { + label = "rootfs"; + reg = <0x01000000 0x03000000>; + }; + partition@4000000 { + label = "media"; + reg = <0x04000000 0x8000000>; + }; + }; +}; + +ðmac { + status = "okay"; + phy-handle = <&internal_ephy>; + phy-mode = "rmii"; +}; + +&spifc { + #address-cells = <1>; + #size-cells = <0>; + + pinctrl-0 = <&spifc_pins>; + pinctrl-names = "default"; + + nand@0 { + compatible = "spi-nand"; + reg = <0>; + spi-max-frequency = <83000000>; + spi-tx-bus-width = <4>; + spi-rx-bus-width = <4>; + #address-cells = <1>; + #size-cells = <1>; + status = "disabled"; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "boot"; + reg = <0 0x200000>; + }; + + partition@200000 { + label = "env"; + reg = <0x200000 0x400000>; + }; + + partition@600000 { + label = "system"; + reg = <0x600000 0xa00000>; + }; + + partition@1000000 { + label = "rootfs"; + reg = <0x1000000 0x3000000>; + }; + + partition@4000000 { + label = "data"; + reg = <0x4000000 0x8000000>; + }; + }; + }; +}; + +&sd { + status = "okay"; + pinctrl-0 = <&sdcard_pins>; + pinctrl-1 = <&sdcard_clk_gate_pins>; + pinctrl-names = "default","clk-gate"; + + bus-width = <4>; + cap-sd-highspeed; + max-frequency = <50000000>; + disable-wp; + + cd-gpios = <&gpio GPIOC_6 GPIO_ACTIVE_LOW>; + vmmc-supply = <&sdcard>; + vqmmc-supply = <&sdcard>; +}; diff --git a/arch/arm64/boot/dts/amlogic/amlogic-c3.dtsi b/arch/arm64/boot/dts/amlogic/amlogic-c3.dtsi index c913dd409e64..c0ce776ec463 100644 --- a/arch/arm64/boot/dts/amlogic/amlogic-c3.dtsi +++ b/arch/arm64/boot/dts/amlogic/amlogic-c3.dtsi @@ -7,6 +7,11 @@ #include #include #include +#include +#include +#include +#include +#include / { cpus { @@ -57,6 +62,34 @@ pwrc: power-controller { }; }; + sram { + compatible = "mmio-sram"; + reg = <0x0 0x07f50e00 0x0 0x100>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x0 0x07f50e00 0x100>; + + scmi_shmem: sram@0 { + compatible = "arm,scmi-shmem"; + reg = <0x0 0x100>; + }; + }; + + firmware { + scmi: scmi { + compatible = "arm,scmi-smc"; + arm,smc-id = <0x820000C1>; + shmem = <&scmi_shmem>; + #address-cells = <1>; + #size-cells = <0>; + + scmi_clk: protocol@14 { + reg = <0x14>; + #clock-cells = <1>; + }; + }; + }; + soc { compatible = "simple-bus"; #address-cells = <2>; @@ -82,6 +115,44 @@ apb4: bus@fe000000 { #size-cells = <2>; ranges = <0x0 0x0 0x0 0xfe000000 0x0 0x480000>; + clkc_periphs: clock-controller@0 { + compatible = "amlogic,c3-peripherals-clkc"; + reg = <0x0 0x0 0x0 0x49c>; + #clock-cells = <1>; + clocks = <&xtal>, + <&scmi_clk CLKID_OSC>, + <&scmi_clk CLKID_FIXED_PLL_OSC>, + <&clkc_pll CLKID_FCLK_DIV2>, + <&clkc_pll CLKID_FCLK_DIV2P5>, + <&clkc_pll CLKID_FCLK_DIV3>, + <&clkc_pll CLKID_FCLK_DIV4>, + <&clkc_pll CLKID_FCLK_DIV5>, + <&clkc_pll CLKID_FCLK_DIV7>, + <&clkc_pll CLKID_GP0_PLL>, + <&scmi_clk CLKID_GP1_PLL_OSC>, + <&clkc_pll CLKID_HIFI_PLL>, + <&scmi_clk CLKID_SYS_CLK>, + <&scmi_clk CLKID_AXI_CLK>, + <&scmi_clk CLKID_SYS_PLL_DIV16>, + <&scmi_clk CLKID_CPU_CLK_DIV16>; + clock-names = "xtal_24m", + "oscin", + "fix", + "fdiv2", + "fdiv2p5", + "fdiv3", + "fdiv4", + "fdiv5", + "fdiv7", + "gp0", + "gp1", + "hifi", + "sysclk", + "axiclk", + "sysplldiv16", + "cpudiv16"; + }; + reset: reset-controller@2000 { compatible = "amlogic,c3-reset"; reg = <0x0 0x2000 0x0 0x98>; @@ -108,6 +179,237 @@ gpio: bank@4000 { #gpio-cells = <2>; gpio-ranges = <&periphs_pinctrl 0 0 55>; }; + + i2c0_pins1: i2c0-pins1 { + mux { + groups = "i2c0_sda_e", + "i2c0_scl_e"; + function = "i2c0"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + i2c0_pins2: i2c0-pins2 { + mux { + groups = "i2c0_sda_d", + "i2c0_scl_d"; + function = "i2c0"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + i2c1_pins1: i2c1-pins1 { + mux { + groups = "i2c1_sda_x", + "i2c1_scl_x"; + function = "i2c1"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + i2c1_pins2: i2c1-pins2 { + mux { + groups = "i2c1_sda_d", + "i2c1_scl_d"; + function = "i2c1"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + i2c1_pins3: i2c1-pins3 { + mux { + groups = "i2c1_sda_a", + "i2c1_scl_a"; + function = "i2c1"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + i2c1_pins4: i2c1-pins4 { + mux { + groups = "i2c1_sda_b", + "i2c1_scl_b"; + function = "i2c1"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + i2c2_pins1: i2c2-pins1 { + mux { + groups = "i2c2_sda", + "i2c2_scl"; + function = "i2c2"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + i2c3_pins1: i2c3-pins1 { + mux { + groups = "i2c3_sda_c", + "i2c3_scl_c"; + function = "i2c3"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + i2c3_pins2: i2c3-pins2 { + mux { + groups = "i2c3_sda_x", + "i2c3_scl_x"; + function = "i2c3"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + i2c3_pins3: i2c3-pins3 { + mux { + groups = "i2c3_sda_d", + "i2c3_scl_d"; + function = "i2c3"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + nand_pins: nand-pins { + mux { + groups = "emmc_nand_d0", + "emmc_nand_d1", + "emmc_nand_d2", + "emmc_nand_d3", + "emmc_nand_d4", + "emmc_nand_d5", + "emmc_nand_d6", + "emmc_nand_d7", + "nand_ce0", + "nand_ale", + "nand_cle", + "nand_wen_clk", + "nand_ren_wr"; + function = "nand"; + input-enable; + }; + }; + + sdcard_pins: sdcard-pins { + mux { + groups = "sdcard_d0", + "sdcard_d1", + "sdcard_d2", + "sdcard_d3", + "sdcard_clk", + "sdcard_cmd"; + function = "sdcard"; + bias-pull-up; + drive-strength-microamp = <4000>; + }; + }; + + sdcard_clk_gate_pins: sdcard-clk-cmd-pins { + mux { + groups = "GPIOC_4"; + function = "gpio_periphs"; + bias-pull-down; + drive-strength-microamp = <4000>; + }; + }; + + sdio_m_clk_gate_pins: sdio-m-clk-cmd-pins { + mux { + groups = "sdio_clk"; + function = "sdio"; + bias-pull-down; + drive-strength-microamp = <4000>; + }; + }; + + sdio_m_pins: sdio-m-all-pins { + mux { + groups = "sdio_d0", + "sdio_d1", + "sdio_d2", + "sdio_d3", + "sdio_clk", + "sdio_cmd"; + function = "sdio"; + input-enable; + bias-pull-up; + drive-strength-microamp = <4000>; + }; + }; + + spicc0_pins1: spicc0-pins1 { + mux { + groups = "spi_a_mosi_b", + "spi_a_miso_b", + "spi_a_clk_b"; + function = "spi_a"; + drive-strength-microamp = <3000>; + }; + }; + + spicc0_pins2: spicc0-pins2 { + mux { + groups = "spi_a_mosi_c", + "spi_a_miso_c", + "spi_a_clk_c"; + function = "spi_a"; + drive-strength-microamp = <3000>; + }; + }; + + spicc0_pins3: spicc0-pins3 { + mux { + groups = "spi_a_mosi_x", + "spi_a_miso_x", + "spi_a_clk_x"; + function = "spi_a"; + drive-strength-microamp = <3000>; + }; + }; + + spicc1_pins1: spicc1-pins1 { + mux { + groups = "spi_b_mosi_d", + "spi_b_miso_d", + "spi_b_clk_d"; + function = "spi_b"; + drive-strength-microamp = <3000>; + }; + }; + + spicc1_pins2: spicc1-pins2 { + mux { + groups = "spi_b_mosi_x", + "spi_b_miso_x", + "spi_b_clk_x"; + function = "spi_b"; + drive-strength-microamp = <3000>; + }; + }; + + spifc_pins: spifc-pins { + mux { + groups = "spif_mo", + "spif_mi", + "spif_clk", + "spif_cs", + "spif_hold", + "spif_wp", + "spif_clk_loop"; + function = "spif"; + drive-strength-microamp = <4000>; + }; + }; }; gpio_intc: interrupt-controller@4080 { @@ -119,13 +421,131 @@ gpio_intc: interrupt-controller@4080 { <10 11 12 13 14 15 16 17 18 19 20 21>; }; + clkc_pll: clock-controller@8000 { + compatible = "amlogic,c3-pll-clkc"; + reg = <0x0 0x8000 0x0 0x1a4>; + #clock-cells = <1>; + clocks = <&scmi_clk CLKID_TOP_PLL_OSC>, + <&scmi_clk CLKID_MCLK_PLL_OSC>, + <&scmi_clk CLKID_FIXED_PLL_OSC>; + clock-names = "top", + "mclk", + "fix"; + }; + + eth_phy: mdio-multiplexer@28000 { + compatible = "amlogic,g12a-mdio-mux"; + reg = <0x0 0x28000 0x0 0xa4>; + + clocks = <&clkc_periphs CLKID_SYS_ETH_PHY>, + <&xtal>, + <&clkc_pll CLKID_FCLK_50M>; + clock-names = "pclk", "clkin0", "clkin1"; + mdio-parent-bus = <&mdio0>; + #address-cells = <1>; + #size-cells = <0>; + + ext_mdio: mdio@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + }; + + int_mdio: mdio@1 { + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + + internal_ephy: ethernet_phy@8 { + compatible = "ethernet-phy-id0180.3301", + "ethernet-phy-ieee802.3-c22"; + interrupts = ; + reg = <8>; + max-speed = <100>; + }; + }; + }; + + spicc0: spi@50000 { + compatible = "amlogic,meson-g12a-spicc"; + reg = <0x0 0x50000 0x0 0x44>; + interrupts = ; + clocks = <&clkc_periphs CLKID_SYS_SPICC_0>, + <&clkc_periphs CLKID_SPICC_A>; + clock-names = "core", "pclk"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spicc1: spi@52000 { + compatible = "amlogic,meson-g12a-spicc"; + reg = <0x0 0x52000 0x0 0x44>; + interrupts = ; + clocks = <&clkc_periphs CLKID_SYS_SPICC_1>, + <&clkc_periphs CLKID_SPICC_B>; + clock-names = "core", "pclk"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spifc: spi@56000 { + compatible = "amlogic,a1-spifc"; + reg = <0x0 0x56000 0x0 0x290>; + interrupts = ; + clocks = <&clkc_periphs CLKID_SPIFC>; + clock-names = "core"; + status = "disabled"; + }; + + i2c0: i2c@66000 { + compatible = "amlogic,meson-axg-i2c"; + reg = <0x0 0x66000 0x0 0x24>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&clkc_periphs CLKID_SYS_I2C_M_A>; + status = "disabled"; + }; + + i2c1: i2c@68000 { + compatible = "amlogic,meson-axg-i2c"; + reg = <0x0 0x68000 0x0 0x24>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&clkc_periphs CLKID_SYS_I2C_M_B>; + status = "disabled"; + }; + + i2c2: i2c@6a000 { + compatible = "amlogic,meson-axg-i2c"; + reg = <0x0 0x6a000 0x0 0x24>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&clkc_periphs CLKID_SYS_I2C_M_C>; + status = "disabled"; + }; + + i2c3: i2c@6c000 { + compatible = "amlogic,meson-axg-i2c"; + reg = <0x0 0x6c000 0x0 0x24>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&clkc_periphs CLKID_SYS_I2C_M_D>; + status = "disabled"; + }; + uart_b: serial@7a000 { compatible = "amlogic,meson-s4-uart", "amlogic,meson-ao-uart"; reg = <0x0 0x7a000 0x0 0x18>; interrupts = ; status = "disabled"; - clocks = <&xtal>, <&xtal>, <&xtal>; + clocks = <&xtal>, <&clkc_periphs CLKID_SYS_UART_B>, <&xtal>; clock-names = "xtal", "pclk", "baud"; }; @@ -136,6 +556,72 @@ sec_ao: ao-secure@10220 { reg = <0x0 0x10220 0x0 0x140>; amlogic,has-chip-id; }; + + sdio: mmc@88000 { + compatible = "amlogic,meson-axg-mmc"; + reg = <0x0 0x88000 0x0 0x800>; + interrupts = ; + power-domains = <&pwrc PWRC_C3_SDIOA_ID>; + clocks = <&clkc_periphs CLKID_SYS_SD_EMMC_A>, + <&clkc_periphs CLKID_SD_EMMC_A>, + <&clkc_pll CLKID_FCLK_DIV2>; + clock-names = "core","clkin0", "clkin1"; + no-mmc; + no-sd; + resets = <&reset RESET_SD_EMMC_A>; + status = "disabled"; + }; + + sd: mmc@8a000 { + compatible = "amlogic,meson-axg-mmc"; + reg = <0x0 0x8a000 0x0 0x800>; + interrupts = ; + power-domains = <&pwrc PWRC_C3_SDCARD_ID>; + clocks = <&clkc_periphs CLKID_SYS_SD_EMMC_B>, + <&clkc_periphs CLKID_SD_EMMC_B>, + <&clkc_pll CLKID_FCLK_DIV2>; + clock-names = "core", "clkin0", "clkin1"; + no-mmc; + no-sdio; + resets = <&reset RESET_SD_EMMC_B>; + status = "disabled"; + }; + + nand: nand-controller@8d000 { + compatible = "amlogic,meson-axg-nfc"; + reg = <0x0 0x8d000 0x0 0x200>, + <0x0 0x8C000 0x0 0x4>; + reg-names = "nfc", "emmc"; + interrupts = ; + clocks = <&clkc_periphs CLKID_SYS_SD_EMMC_C>, + <&clkc_pll CLKID_FCLK_DIV2>; + clock-names = "core", "device"; + status = "disabled"; + }; + }; + + ethmac: ethernet@fdc00000 { + compatible = "amlogic,meson-g12a-dwmac", + "snps,dwmac-3.70a", + "snps,dwmac"; + reg = <0x0 0xfdc00000 0x0 0x10000>, + <0x0 0xfe024000 0x0 0x8>; + interrupts = ; + interrupt-names = "macirq"; + power-domains = <&pwrc PWRC_C3_ETH_ID>; + clocks = <&clkc_periphs CLKID_SYS_ETH_MAC>, + <&clkc_pll CLKID_FCLK_DIV2>, + <&clkc_pll CLKID_FCLK_50M>; + clock-names = "stmmaceth", "clkin0", "clkin1"; + rx-fifo-depth = <4096>; + tx-fifo-depth = <2048>; + status = "disabled"; + + mdio0: mdio { + compatible = "snps,dwmac-mdio"; + #address-cells = <1>; + #size-cells = <0>; + }; }; }; }; From patchwork Fri Aug 23 02:29:19 2024 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Xianwei Zhao via B4 Relay X-Patchwork-Id: 13774511 Received: from smtp.kernel.org (aws-us-west-2-korg-mail-1.web.codeaurora.org [10.30.226.201]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.subspace.kernel.org (Postfix) with ESMTPS id 7D57D28DC3; Fri, 23 Aug 2024 02:29:20 +0000 (UTC) Authentication-Results: smtp.subspace.kernel.org; arc=none smtp.client-ip=10.30.226.201 ARC-Seal: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1724380160; cv=none; b=LPXYud0QkpGYo6Ss3wGkZ06FcmSvSNpeyRmQRd35FcBiJRTQaTcXg++ClICrZ9ZilbGp1qKqtFwD+39l2zdEGb5sTXJ2qCUkhCcL4DfFsqcz/O29igsrr+oYdsN5NVuqGJGfZ/Zv4OajgIO1Wymy06lmzJHkbzQh/W7zrJKdQpU= ARC-Message-Signature: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1724380160; c=relaxed/simple; bh=QYKy3ItvpOU+P8gyuVySP8Mf4hzZhG36E4zOb4MYPcE=; h=From:Date:Subject:MIME-Version:Content-Type:Message-Id:References: In-Reply-To:To:Cc; b=nwmsgfun55CF2jD5Yr1+1w6SJc5NyQwCgDsWiDag4R6wPXTGy6d4O5BEg2jG+TJUTy8h/00JNw4dKtoApDlUaiz/mzBKsQcUfWYlSbUHUqjkfSzG32/qrD1GVYsFoMWJ31J/KARMV3FVv/G/9Jk6Wmb+YxChU9tNgeNe2UpuGNk= ARC-Authentication-Results: i=1; smtp.subspace.kernel.org; dkim=pass (2048-bit key) header.d=kernel.org header.i=@kernel.org header.b=HPjAeM34; arc=none smtp.client-ip=10.30.226.201 Authentication-Results: smtp.subspace.kernel.org; dkim=pass (2048-bit key) header.d=kernel.org header.i=@kernel.org header.b="HPjAeM34" Received: by smtp.kernel.org (Postfix) with ESMTPS id 28337C4AF12; Fri, 23 Aug 2024 02:29:20 +0000 (UTC) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/simple; d=kernel.org; s=k20201202; t=1724380160; bh=QYKy3ItvpOU+P8gyuVySP8Mf4hzZhG36E4zOb4MYPcE=; h=From:Date:Subject:References:In-Reply-To:To:Cc:Reply-To:From; b=HPjAeM34HY5Bj86mK1cOd/a9onc4Vj/oIrn2DSFgCu72CP+H6t5wcsrP6KQHCIzxJ Go4J+PigdB+fpx3E34fPv54JmKBi+b7kCBH9NRU02Mzo14LGGwzNG3/PMlu/XxFZav gL7wYNWYIfP7lUEGFhXRD3XMxh+GWVeAxRu80nqufEKsmU5fdkTNgKu3zWGsgfLhd8 MMvBXsd4BkPpdU8IVP9EN4Xg48M4Szn2zz+EKQlMB7HvmYPjI9PMPCzMhB4lsCprJv Nf0YdeuuP3vuTWAzlCwIEbbevHiFlEBrBYy2P8Y8VKA/HjIC1byd+VulCthpt4akLl bodktE71IOdcg== Received: from aws-us-west-2-korg-lkml-1.web.codeaurora.org (localhost.localdomain [127.0.0.1]) by smtp.lore.kernel.org (Postfix) with ESMTP id 1C261C54722; Fri, 23 Aug 2024 02:29:20 +0000 (UTC) From: Xianwei Zhao via B4 Relay Date: Fri, 23 Aug 2024 10:29:19 +0800 Subject: [PATCH v3 3/3] arm64: dts: amlogic: add C3 AW419 board Precedence: bulk X-Mailing-List: linux-clk@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 Message-Id: <20240823-c3_add_node-v3-3-3648376037f4@amlogic.com> References: <20240823-c3_add_node-v3-0-3648376037f4@amlogic.com> In-Reply-To: <20240823-c3_add_node-v3-0-3648376037f4@amlogic.com> To: Neil Armstrong , Jerome Brunet , Michael Turquette , Stephen Boyd , Rob Herring , Krzysztof Kozlowski , Conor Dooley , Chuan Liu , Kevin Hilman , Martin Blumenstingl Cc: Krzysztof Kozlowski , linux-amlogic@lists.infradead.org, linux-clk@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-arm-kernel@lists.infradead.org, Xianwei Zhao X-Mailer: b4 0.12.4 X-Developer-Signature: v=1; a=ed25519-sha256; t=1724380157; l=7260; i=xianwei.zhao@amlogic.com; s=20231208; h=from:subject:message-id; bh=1+fROI9qhU3i8mzqXqlDx8fCppD9gx8vfbGG6R9DkD0=; b=7NOvRGpHxaLG8F/hsjxvTq6XkeCORoZPfCqbCrhElQ0WQFqpsUrm9gfiHxK5XGWVpFMG9e1sx 575z7pfJhxwDC7LIttQ+/0ZVnKHmyv0j4ZD+2eGpgu7GMFCMBfumP76 X-Developer-Key: i=xianwei.zhao@amlogic.com; a=ed25519; pk=o4fDH8ZXL6xQg5h17eNzRljf6pwZHWWjqcOSsj3dW24= X-Endpoint-Received: by B4 Relay for xianwei.zhao@amlogic.com/20231208 with auth_id=107 X-Original-From: Xianwei Zhao Reply-To: xianwei.zhao@amlogic.com From: Xianwei Zhao Add Amlogic C3 C308L AW419 board. The corresponding binding has been applied, therefore, this series does not need to add a binding corresponding to the AW419 board. Reviewed-by: Neil Armstrong Signed-off-by: Xianwei Zhao --- arch/arm64/boot/dts/amlogic/Makefile | 1 + .../boot/dts/amlogic/amlogic-c3-c308l-aw419.dts | 262 +++++++++++++++++++++ 2 files changed, 263 insertions(+) diff --git a/arch/arm64/boot/dts/amlogic/Makefile b/arch/arm64/boot/dts/amlogic/Makefile index 9708abdadd7c..8db42f26c1e6 100644 --- a/arch/arm64/boot/dts/amlogic/Makefile +++ b/arch/arm64/boot/dts/amlogic/Makefile @@ -2,6 +2,7 @@ dtb-$(CONFIG_ARCH_MESON) += amlogic-a4-a113l2-ba400.dtb dtb-$(CONFIG_ARCH_MESON) += amlogic-a5-a113x2-av400.dtb dtb-$(CONFIG_ARCH_MESON) += amlogic-c3-c302x-aw409.dtb +dtb-$(CONFIG_ARCH_MESON) += amlogic-c3-c308l-aw419.dtb dtb-$(CONFIG_ARCH_MESON) += amlogic-t7-a311d2-an400.dtb dtb-$(CONFIG_ARCH_MESON) += amlogic-t7-a311d2-khadas-vim4.dtb dtb-$(CONFIG_ARCH_MESON) += meson-a1-ad401.dtb diff --git a/arch/arm64/boot/dts/amlogic/amlogic-c3-c308l-aw419.dts b/arch/arm64/boot/dts/amlogic/amlogic-c3-c308l-aw419.dts new file mode 100644 index 000000000000..4477a2659e27 --- /dev/null +++ b/arch/arm64/boot/dts/amlogic/amlogic-c3-c308l-aw419.dts @@ -0,0 +1,262 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2024 Amlogic, Inc. All rights reserved. + */ + +/dts-v1/; + +#include "amlogic-c3.dtsi" + +/ { + model = "Amlogic C308l aw419 Development Board"; + compatible = "amlogic,aw419", "amlogic,c3"; + interrupt-parent = <&gic>; + #address-cells = <2>; + #size-cells = <2>; + + aliases { + serial0 = &uart_b; + spi0 = &spifc; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x0 0x0 0x80000000>; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + /* 9 MiB reserved for ARM Trusted Firmware */ + secmon_reserved: secmon@7f00000 { + compatible = "shared-dma-pool"; + reg = <0x0 0x07f00000 0x0 0x900000>; + no-map; + }; + }; + + main_12v: regulator-main-12v { + compatible = "regulator-fixed"; + regulator-name = "12V"; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + regulator-boot-on; + regulator-always-on; + }; + + vcc_5v: regulator-vcc-5v { + compatible = "regulator-fixed"; + regulator-name = "VCC5V"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&main_12v>; + regulator-boot-on; + regulator-always-on; + }; + + vddq: regulator-vddq { + compatible = "regulator-fixed"; + regulator-name = "VDDQ"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + vin-supply = <&main_12v>; + regulator-boot-on; + regulator-always-on; + }; + + vddao_3v3: regulator-vddao-3v3 { + compatible = "regulator-fixed"; + regulator-name = "VDDAO3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&main_12v>; + regulator-boot-on; + regulator-always-on; + }; + + vddao_1v8: regulator-vddao-1v8 { + compatible = "regulator-fixed"; + regulator-name = "VDDAO1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&vddao_3v3>; + regulator-boot-on; + regulator-always-on; + }; + + ddr4_2v5: regulator-ddr4-2v5 { + compatible = "regulator-fixed"; + regulator-name = "DDR4_2V5"; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + vin-supply = <&vddao_3v3>; + regulator-boot-on; + regulator-always-on; + }; + + vcc_3v3: regulator-vcc-3v3 { + compatible = "regulator-fixed"; + regulator-name = "VCC3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vddao_3v3>; + regulator-boot-on; + regulator-always-on; + }; + + vcc_1v8: regulator-vcc-1v8 { + compatible = "regulator-fixed"; + regulator-name = "VCC1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&vcc_3v3>; + regulator-boot-on; + regulator-always-on; + }; + + vdd_1v8: regulator-vdd-1v8 { + compatible = "regulator-fixed"; + regulator-name = "VDD1V8_BOOT"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&vcc_3v3>; + regulator-boot-on; + regulator-always-on; + }; + + vddio_b: regulator-vddio-3v3-b { + compatible = "regulator-fixed"; + regulator-name = "VDDIO_B"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vcc_3v3>; + regulator-boot-on; + regulator-always-on; + }; + + sdcard: regulator-sdcard { + compatible = "regulator-fixed"; + regulator-name = "SDCARD_POWER"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vddao_3v3>; + gpio = <&gpio GPIOA_4 GPIO_ACTIVE_LOW>; + regulator-boot-on; + regulator-always-on; + }; +}; + +&uart_b { + status = "okay"; +}; + +&nand { + status = "okay"; + #address-cells = <1>; + #size-cells = <0>; + + pinctrl-0 = <&nand_pins>; + pinctrl-names = "default"; + + nand@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <1>; + nand-on-flash-bbt; + + partition@0 { + label = "boot"; + reg = <0x0 0x00200000>; + }; + partition@200000 { + label = "env"; + reg = <0x00200000 0x00400000>; + }; + partition@600000 { + label = "system"; + reg = <0x00600000 0x00a00000>; + }; + partition@1000000 { + label = "rootfs"; + reg = <0x01000000 0x03000000>; + }; + partition@4000000 { + label = "media"; + reg = <0x04000000 0x8000000>; + }; + }; +}; + +ðmac { + status = "okay"; + phy-handle = <&internal_ephy>; + phy-mode = "rmii"; +}; + +&spifc { + #address-cells = <1>; + #size-cells = <0>; + + pinctrl-0 = <&spifc_pins>; + pinctrl-names = "default"; + + nand@0 { + compatible = "spi-nand"; + reg = <0>; + spi-max-frequency = <83000000>; + spi-tx-bus-width = <4>; + spi-rx-bus-width = <4>; + #address-cells = <1>; + #size-cells = <1>; + status = "disabled"; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "boot"; + reg = <0 0x200000>; + }; + + partition@200000 { + label = "env"; + reg = <0x200000 0x400000>; + }; + + partition@600000 { + label = "system"; + reg = <0x600000 0xa00000>; + }; + + partition@1000000 { + label = "rootfs"; + reg = <0x1000000 0x3000000>; + }; + + partition@4000000 { + label = "data"; + reg = <0x4000000 0x8000000>; + }; + }; + }; +}; + +&sd { + status = "okay"; + pinctrl-0 = <&sdcard_pins>; + pinctrl-1 = <&sdcard_clk_gate_pins>; + pinctrl-names = "default","clk-gate"; + + bus-width = <4>; + cap-sd-highspeed; + max-frequency = <50000000>; + disable-wp; + + cd-gpios = <&gpio GPIOC_6 GPIO_ACTIVE_LOW>; + vmmc-supply = <&sdcard>; + vqmmc-supply = <&sdcard>; +};