From patchwork Wed Nov 6 11:24:20 2024 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Andrew Kreimer X-Patchwork-Id: 13864410 X-Patchwork-Delegate: kuba@kernel.org Received: from mail-wr1-f51.google.com (mail-wr1-f51.google.com [209.85.221.51]) (using TLSv1.2 with cipher ECDHE-RSA-AES128-GCM-SHA256 (128/128 bits)) (No client certificate requested) by smtp.subspace.kernel.org (Postfix) with ESMTPS id 9C27B646; Wed, 6 Nov 2024 11:25:26 +0000 (UTC) Authentication-Results: smtp.subspace.kernel.org; arc=none smtp.client-ip=209.85.221.51 ARC-Seal: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1730892328; cv=none; b=uIQSzNf/kNcDgn+OdSATz7BpR2YLiGKY466dmECi4UcXDpSPZWt/r++Ia+CDTtlMfqZ5qHVqUOqpHZjs9egF643Mmt0YxY0y1ri+Lx/OS3gRLOcdg/hU79KfAS3PenLlpkNgh3ifB0AnHCHKhn4A8AKuMlevmkN8ppU43QqOu64= ARC-Message-Signature: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1730892328; c=relaxed/simple; bh=GVMNZrKHnqKRvmphZXkLgY/ueAMpsUn34Uncn1P0ILM=; h=From:To:Cc:Subject:Date:Message-ID:In-Reply-To:References: MIME-Version; b=Xf3TWr0CXVrYMtK2wP0OVqhyt5M98nv4HMNSfu/Bh7glBHULarKaYzehJYTD4s021456iJPlcNbWaG7GFl4QHUb/xw41IVEtFuV/DbAuxsDO7k6qMeJGy6nL9Kx5wbaRvQ8Bca1tAHc8t42a8CbXT3w7i/8DqLmY12dvmR7lsWs= ARC-Authentication-Results: i=1; smtp.subspace.kernel.org; dmarc=pass (p=none dis=none) header.from=gmail.com; spf=pass smtp.mailfrom=gmail.com; dkim=pass (2048-bit key) header.d=gmail.com header.i=@gmail.com header.b=nlSG3EDq; arc=none smtp.client-ip=209.85.221.51 Authentication-Results: smtp.subspace.kernel.org; dmarc=pass (p=none dis=none) header.from=gmail.com Authentication-Results: smtp.subspace.kernel.org; spf=pass smtp.mailfrom=gmail.com Authentication-Results: smtp.subspace.kernel.org; dkim=pass (2048-bit key) header.d=gmail.com header.i=@gmail.com header.b="nlSG3EDq" Received: by mail-wr1-f51.google.com with SMTP id ffacd0b85a97d-37d43a9bc03so4559174f8f.2; Wed, 06 Nov 2024 03:25:26 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=20230601; t=1730892325; x=1731497125; darn=vger.kernel.org; h=content-transfer-encoding:mime-version:references:in-reply-to :message-id:date:subject:cc:to:from:from:to:cc:subject:date :message-id:reply-to; bh=91I/y3wjbBNWvrHPr3/8/6Qvv/qZ19kFsf+7A0QbbUc=; b=nlSG3EDqZBArmIyqz2cXFxv+/ov26gtqHGiHRDp8vZ9MIqKfRJjSQvve9kVECISmEx ayR9WjmbdbhB0husNg/mDi+hEjexCNGOtNg9bc1cqdf4DWmK9Pjdz0OBtLaKCwJKjdVW UfLmSQEmb8bvqdQxKM5uKqzVhknNLvSIfBo0SaE/Pw9ksR7EcauF6tcSS5h/pafEM+cG 8OFThoTaoAz6GslemVyy4lGMxTfeUGnLt9zyWKFZ6nXRhrWao3y+lATio77O4gUjTgpl sTY8sdudSjw+uB9sXcZn/0uHhHicc1S0pBZRJPc2EPoitD1uEkktTc3LP/IAqfkuhzTL aMfw== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20230601; t=1730892325; x=1731497125; h=content-transfer-encoding:mime-version:references:in-reply-to :message-id:date:subject:cc:to:from:x-gm-message-state:from:to:cc :subject:date:message-id:reply-to; bh=91I/y3wjbBNWvrHPr3/8/6Qvv/qZ19kFsf+7A0QbbUc=; b=HjqM9X90hn1gX7u+GAKgGcoNEYhTgOWgTQbMZcCmJM9T7Tib9K83IyUQZsKEKacvr2 2cPaeCeNupXL/LgnPbHRi5E9dPL2jPb8fOP8yEKaHBP7TYdsb36aaFtT/M6QRyZZjwrt QAfy6hxvJMMuHmJSCd3LcQZdCxUi2XQaTCyLiN5XwcUEse78xqyk+coPeNF9eEIZJjL8 g1r9/KRcwun8WYRM28FOQlhkwpgyEZ3GZoXcxBwerKzYK8VG7p2/KwsHwBQJTHZv+WqY CeEMLbNTM9A97N7pO2euvrb4BmdgujyUZiZbYBxbymBJNpsI9FoXOenDa/jgMo0fIi6T Kt9A== X-Forwarded-Encrypted: i=1; AJvYcCU8ygEJR+B0lbtVV7Eg7l16kmvjluAMh+qBvigeWzDYxNNwj4JcMLwCrKFfISKd6m4NfG8I/p9LqtjaNc78FSs=@vger.kernel.org, AJvYcCWNp9TIbYUqaNjkVWM4A2hG9p33flXT7GIEygDuen3PuQkW3WM7R9pv6la88ewgXdahOAGr2ZtfHmxCKrRD@vger.kernel.org X-Gm-Message-State: AOJu0YzyUo2zWu0dOAiay8fz7nyVNWaeyQnlpnd0Q+rg+5wa49swccIa hgO4fQKm1KnRWO6cGNl/YWNnqdnHqqOQTxElsSYtLSI/XnxgtPOy X-Google-Smtp-Source: AGHT+IF+BajsbEorQUT96QOOZ7pdB5zvo3TNqjISc8k04NVfiqyVN0QicXWJNeNcuiC8p5fMg2piJg== X-Received: by 2002:a05:6000:4027:b0:37d:4ebe:164a with SMTP id ffacd0b85a97d-381c7ac7704mr17052032f8f.50.1730892324575; Wed, 06 Nov 2024 03:25:24 -0800 (PST) Received: from void.void ([31.210.177.158]) by smtp.gmail.com with ESMTPSA id ffacd0b85a97d-381c10d40casm18816533f8f.27.2024.11.06.03.25.23 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Wed, 06 Nov 2024 03:25:24 -0800 (PST) From: Andrew Kreimer To: Karsten Keil , Jakub Kicinski , Jeff Johnson , Simon Horman , Dan Carpenter Cc: netdev@vger.kernel.org, linux-kernel@vger.kernel.org, kernel-janitors@vger.kernel.org, Andrew Kreimer Subject: [PATCH net-next v2] mISDN: Fix typos Date: Wed, 6 Nov 2024 13:24:20 +0200 Message-ID: <20241106112513.9559-1-algonell@gmail.com> X-Mailer: git-send-email 2.47.0.229.g8f8d6eee53 In-Reply-To: <20241102134856.11322-1-algonell@gmail.com> References: <20241102134856.11322-1-algonell@gmail.com> Precedence: bulk X-Mailing-List: netdev@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 X-Patchwork-Delegate: kuba@kernel.org Fix typos: - syncronized -> synchronized - interfacs -> interface - otherwhise -> otherwise - ony -> only - busses -> buses - maxinum -> maximum Via codespell. Reported-by: Simon Horman Signed-off-by: Andrew Kreimer --- v1: - Fix typos in printk messages. - https://lore.kernel.org/netdev/20241102134856.11322-1-algonell@gmail.com/ v2: - Address all non-false-positive suggestions, including comments. - The syncronized ==> synchronized suggestions for struct hfc_multi were skipped. drivers/isdn/hardware/mISDN/hfcmulti.c | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-) Interdiff against v1: diff --git a/drivers/isdn/hardware/mISDN/hfcmulti.c b/drivers/isdn/hardware/mISDN/hfcmulti.c index f3af73ea34ae..45ff0e198f8f 100644 --- a/drivers/isdn/hardware/mISDN/hfcmulti.c +++ b/drivers/isdn/hardware/mISDN/hfcmulti.c @@ -25,8 +25,8 @@ * Bit 8 = 0x00100 = uLaw (instead of aLaw) * Bit 9 = 0x00200 = Disable DTMF detect on all B-channels via hardware * Bit 10 = spare - * Bit 11 = 0x00800 = Force PCM bus into slave mode. (otherwhise auto) - * or Bit 12 = 0x01000 = Force PCM bus into master mode. (otherwhise auto) + * Bit 11 = 0x00800 = Force PCM bus into slave mode. (otherwise auto) + * or Bit 12 = 0x01000 = Force PCM bus into master mode. (otherwise auto) * Bit 13 = spare * Bit 14 = 0x04000 = Use external ram (128K) * Bit 15 = 0x08000 = Use external ram (512K) @@ -41,7 +41,7 @@ * port: (optional or required for all ports on all installed cards) * HFC-4S/HFC-8S only bits: * Bit 0 = 0x001 = Use master clock for this S/T interface - * (ony once per chip). + * (only once per chip). * Bit 1 = 0x002 = transmitter line setup (non capacitive mode) * Don't use this unless you know what you are doing! * Bit 2 = 0x004 = Disable E-channel. (No E-channel processing) @@ -82,7 +82,7 @@ * By default (0), the PCM bus id is 100 for the card that is PCM master. * If multiple cards are PCM master (because they are not interconnected), * each card with PCM master will have increasing PCM id. - * All PCM busses with the same ID are expected to be connected and have + * All PCM buses with the same ID are expected to be connected and have * common time slots slots. * Only one chip of the PCM bus must be master, the others slave. * -1 means no support of PCM bus not even. @@ -2001,7 +2001,7 @@ hfcmulti_tx(struct hfc_multi *hc, int ch) if (Zspace <= 0) Zspace += hc->Zlen; Zspace -= 4; /* keep not too full, so pointers will not overrun */ - /* fill transparent data only to maxinum transparent load (minus 4) */ + /* fill transparent data only to maximum transparent load (minus 4) */ if (bch && test_bit(FLG_TRANSPARENT, &bch->Flags)) Zspace = Zspace - hc->Zlen + hc->max_trans; if (Zspace <= 0) /* no space of 4 bytes */ Range-diff against v1: 1: e27df5ca2655 ! 1: 69784b0d548a mISDN: Fix typos @@ Commit message mISDN: Fix typos Fix typos: - - syncronized -> synchronized. - - interfacs -> interface. + - syncronized -> synchronized + - interfacs -> interface + - otherwhise -> otherwise + - ony -> only + - busses -> buses + - maxinum -> maximum + Via codespell. + + Reported-by: Simon Horman Signed-off-by: Andrew Kreimer ## drivers/isdn/hardware/mISDN/hfcmulti.c ## +@@ + * Bit 8 = 0x00100 = uLaw (instead of aLaw) + * Bit 9 = 0x00200 = Disable DTMF detect on all B-channels via hardware + * Bit 10 = spare +- * Bit 11 = 0x00800 = Force PCM bus into slave mode. (otherwhise auto) +- * or Bit 12 = 0x01000 = Force PCM bus into master mode. (otherwhise auto) ++ * Bit 11 = 0x00800 = Force PCM bus into slave mode. (otherwise auto) ++ * or Bit 12 = 0x01000 = Force PCM bus into master mode. (otherwise auto) + * Bit 13 = spare + * Bit 14 = 0x04000 = Use external ram (128K) + * Bit 15 = 0x08000 = Use external ram (512K) +@@ + * port: (optional or required for all ports on all installed cards) + * HFC-4S/HFC-8S only bits: + * Bit 0 = 0x001 = Use master clock for this S/T interface +- * (ony once per chip). ++ * (only once per chip). + * Bit 1 = 0x002 = transmitter line setup (non capacitive mode) + * Don't use this unless you know what you are doing! + * Bit 2 = 0x004 = Disable E-channel. (No E-channel processing) +@@ + * By default (0), the PCM bus id is 100 for the card that is PCM master. + * If multiple cards are PCM master (because they are not interconnected), + * each card with PCM master will have increasing PCM id. +- * All PCM busses with the same ID are expected to be connected and have ++ * All PCM buses with the same ID are expected to be connected and have + * common time slots slots. + * Only one chip of the PCM bus must be master, the others slave. + * -1 means no support of PCM bus not even. @@ drivers/isdn/hardware/mISDN/hfcmulti.c: hfcmulti_resync(struct hfc_multi *locked, struct hfc_multi *newmaster, int rm) if (newmaster) { hc = newmaster; @@ drivers/isdn/hardware/mISDN/hfcmulti.c: hfcmulti_resync(struct hfc_multi *locked "with QUARTZ\n", hc->id, hc); if (hc->ctype == HFC_TYPE_E1) { /* Use the crystal clock for the PCM +@@ drivers/isdn/hardware/mISDN/hfcmulti.c: hfcmulti_tx(struct hfc_multi *hc, int ch) + if (Zspace <= 0) + Zspace += hc->Zlen; + Zspace -= 4; /* keep not too full, so pointers will not overrun */ +- /* fill transparent data only to maxinum transparent load (minus 4) */ ++ /* fill transparent data only to maximum transparent load (minus 4) */ + if (bch && test_bit(FLG_TRANSPARENT, &bch->Flags)) + Zspace = Zspace - hc->Zlen + hc->max_trans; + if (Zspace <= 0) /* no space of 4 bytes */ @@ drivers/isdn/hardware/mISDN/hfcmulti.c: init_e1_port_hw(struct hfc_multi *hc, struct hm_map *m) if (debug & DEBUG_HFCMULTI_INIT) printk(KERN_DEBUG diff --git a/drivers/isdn/hardware/mISDN/hfcmulti.c b/drivers/isdn/hardware/mISDN/hfcmulti.c index e5a483fd9ad8..45ff0e198f8f 100644 --- a/drivers/isdn/hardware/mISDN/hfcmulti.c +++ b/drivers/isdn/hardware/mISDN/hfcmulti.c @@ -25,8 +25,8 @@ * Bit 8 = 0x00100 = uLaw (instead of aLaw) * Bit 9 = 0x00200 = Disable DTMF detect on all B-channels via hardware * Bit 10 = spare - * Bit 11 = 0x00800 = Force PCM bus into slave mode. (otherwhise auto) - * or Bit 12 = 0x01000 = Force PCM bus into master mode. (otherwhise auto) + * Bit 11 = 0x00800 = Force PCM bus into slave mode. (otherwise auto) + * or Bit 12 = 0x01000 = Force PCM bus into master mode. (otherwise auto) * Bit 13 = spare * Bit 14 = 0x04000 = Use external ram (128K) * Bit 15 = 0x08000 = Use external ram (512K) @@ -41,7 +41,7 @@ * port: (optional or required for all ports on all installed cards) * HFC-4S/HFC-8S only bits: * Bit 0 = 0x001 = Use master clock for this S/T interface - * (ony once per chip). + * (only once per chip). * Bit 1 = 0x002 = transmitter line setup (non capacitive mode) * Don't use this unless you know what you are doing! * Bit 2 = 0x004 = Disable E-channel. (No E-channel processing) @@ -82,7 +82,7 @@ * By default (0), the PCM bus id is 100 for the card that is PCM master. * If multiple cards are PCM master (because they are not interconnected), * each card with PCM master will have increasing PCM id. - * All PCM busses with the same ID are expected to be connected and have + * All PCM buses with the same ID are expected to be connected and have * common time slots slots. * Only one chip of the PCM bus must be master, the others slave. * -1 means no support of PCM bus not even. @@ -930,7 +930,7 @@ hfcmulti_resync(struct hfc_multi *locked, struct hfc_multi *newmaster, int rm) if (newmaster) { hc = newmaster; if (debug & DEBUG_HFCMULTI_PLXSD) - printk(KERN_DEBUG "id=%d (0x%p) = syncronized with " + printk(KERN_DEBUG "id=%d (0x%p) = synchronized with " "interface.\n", hc->id, hc); /* Enable new sync master */ plx_acc_32 = hc->plx_membase + PLX_GPIOC; @@ -949,7 +949,7 @@ hfcmulti_resync(struct hfc_multi *locked, struct hfc_multi *newmaster, int rm) hc = pcmmaster; if (debug & DEBUG_HFCMULTI_PLXSD) printk(KERN_DEBUG - "id=%d (0x%p) = PCM master syncronized " + "id=%d (0x%p) = PCM master synchronized " "with QUARTZ\n", hc->id, hc); if (hc->ctype == HFC_TYPE_E1) { /* Use the crystal clock for the PCM @@ -2001,7 +2001,7 @@ hfcmulti_tx(struct hfc_multi *hc, int ch) if (Zspace <= 0) Zspace += hc->Zlen; Zspace -= 4; /* keep not too full, so pointers will not overrun */ - /* fill transparent data only to maxinum transparent load (minus 4) */ + /* fill transparent data only to maximum transparent load (minus 4) */ if (bch && test_bit(FLG_TRANSPARENT, &bch->Flags)) Zspace = Zspace - hc->Zlen + hc->max_trans; if (Zspace <= 0) /* no space of 4 bytes */ @@ -4672,7 +4672,7 @@ init_e1_port_hw(struct hfc_multi *hc, struct hm_map *m) if (debug & DEBUG_HFCMULTI_INIT) printk(KERN_DEBUG "%s: PORT set optical " - "interfacs: card(%d) " + "interface: card(%d) " "port(%d)\n", __func__, HFC_cnt + 1, 1);