diff mbox series

[v3,18/20] arm64: dts: google: Add initial Oriole/pixel 6 board support

Message ID 20231011184823.443959-19-peter.griffin@linaro.org (mailing list archive)
State New
Headers show
Series Add minimal Tensor/GS101 SoC support and Oriole/Pixel6 board | expand

Commit Message

Peter Griffin Oct. 11, 2023, 6:48 p.m. UTC
Add initial board support for the Pixel 6 phone code named Oriole. This
has been tested with a minimal busybox initramfs and boots to a shell.

Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
---
 arch/arm64/boot/dts/google/Makefile         |  4 ++
 arch/arm64/boot/dts/google/gs101-oriole.dts | 79 +++++++++++++++++++++
 2 files changed, 83 insertions(+)
 create mode 100644 arch/arm64/boot/dts/google/Makefile
 create mode 100644 arch/arm64/boot/dts/google/gs101-oriole.dts

Comments

William McVicker Oct. 11, 2023, 9:55 p.m. UTC | #1
On 10/11/2023, Peter Griffin wrote:
> Add initial board support for the Pixel 6 phone code named Oriole. This
> has been tested with a minimal busybox initramfs and boots to a shell.
> 
> Signed-off-by: Peter Griffin <peter.griffin@linaro.org>

Tested-by: Will McVicker <willmcvicker@google.com>

Thanks,
Will

> ---
>  arch/arm64/boot/dts/google/Makefile         |  4 ++
>  arch/arm64/boot/dts/google/gs101-oriole.dts | 79 +++++++++++++++++++++
>  2 files changed, 83 insertions(+)
>  create mode 100644 arch/arm64/boot/dts/google/Makefile
>  create mode 100644 arch/arm64/boot/dts/google/gs101-oriole.dts
> 
> diff --git a/arch/arm64/boot/dts/google/Makefile b/arch/arm64/boot/dts/google/Makefile
> new file mode 100644
> index 000000000000..5cea8ff27141
> --- /dev/null
> +++ b/arch/arm64/boot/dts/google/Makefile
> @@ -0,0 +1,4 @@
> +# SPDX-License-Identifier: GPL-2.0
> +
> +dtb-$(CONFIG_ARCH_GOOGLE_TENSOR) += \
> +	gs101-oriole.dtb \
> diff --git a/arch/arm64/boot/dts/google/gs101-oriole.dts b/arch/arm64/boot/dts/google/gs101-oriole.dts
> new file mode 100644
> index 000000000000..3bebca989d34
> --- /dev/null
> +++ b/arch/arm64/boot/dts/google/gs101-oriole.dts
> @@ -0,0 +1,79 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/*
> + * Oriole Device Tree
> + *
> + * Copyright 2021-2023 Google,LLC
> + */
> +
> +/dts-v1/;
> +/plugin/;
> +
> +#include <dt-bindings/gpio/gpio.h>
> +#include <dt-bindings/input/input.h>
> +#include "gs101-pinctrl.h"
> +#include "gs101.dtsi"
> +
> +/ {
> +	model = "Oriole";
> +	compatible = "google,gs101-oriole", "google,gs101";
> +
> +	chosen {
> +		bootargs = "earlycon=exynos4210,mmio32,0x10A00000 console=ttySAC0";
> +	};
> +
> +	gpio-keys {
> +		compatible = "gpio-keys";
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&key_voldown &key_volup &key_power>;
> +
> +		button-vol-down {
> +			label = "KEY_VOLUMEDOWN";
> +			linux,code = <KEY_VOLUMEDOWN>;
> +			gpios = <&gpa7 3 GPIO_ACTIVE_LOW>;
> +			wakeup-source;
> +		};
> +
> +		button-vol-up {
> +			label = "KEY_VOLUMEUP";
> +			linux,code = <KEY_VOLUMEUP>;
> +			gpios = <&gpa8 1 GPIO_ACTIVE_LOW>;
> +			wakeup-source;
> +		};
> +
> +		button-power {
> +			label = "KEY_POWER";
> +			linux,code = <KEY_POWER>;
> +			gpios = <&gpa10 1 GPIO_ACTIVE_LOW>;
> +			wakeup-source;
> +		};
> +	};
> +};
> +
> +&pinctrl_1 {
> +	key_voldown: key-voldown-pins {
> +		samsung,pins = "gpa7-3";
> +		samsung,pin-function = <0xf>;
> +		samsung,pin-pud = <0>;
> +		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
> +	};
> +
> +	key_volup: key-volup-pins {
> +		samsung,pins = "gpa8-1";
> +		samsung,pin-function = <0xf>;
> +		samsung,pin-pud = <0>;
> +		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
> +	};
> +};
> +
> +&pinctrl_0 {
> +	key_power: key-power-pins {
> +		samsung,pins = "gpa10-1";
> +		samsung,pin-function = <0xf>;
> +		samsung,pin-pud = <0>;
> +		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
> +	};
> +};
> +
> +&watchdog_cl0 {
> +	timeout-sec = <30>;
> +};
> -- 
> 2.42.0.655.g421f12c284-goog
>
Krzysztof Kozlowski Oct. 12, 2023, 6:44 a.m. UTC | #2
On 11/10/2023 20:48, Peter Griffin wrote:
> Add initial board support for the Pixel 6 phone code named Oriole. This
> has been tested with a minimal busybox initramfs and boots to a shell.
> 
> Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
> ---
>  arch/arm64/boot/dts/google/Makefile         |  4 ++
>  arch/arm64/boot/dts/google/gs101-oriole.dts | 79 +++++++++++++++++++++
>  2 files changed, 83 insertions(+)
>  create mode 100644 arch/arm64/boot/dts/google/Makefile
>  create mode 100644 arch/arm64/boot/dts/google/gs101-oriole.dts
> 
> diff --git a/arch/arm64/boot/dts/google/Makefile b/arch/arm64/boot/dts/google/Makefile
> new file mode 100644
> index 000000000000..5cea8ff27141
> --- /dev/null
> +++ b/arch/arm64/boot/dts/google/Makefile
> @@ -0,0 +1,4 @@
> +# SPDX-License-Identifier: GPL-2.0
> +
> +dtb-$(CONFIG_ARCH_GOOGLE_TENSOR) += \
> +	gs101-oriole.dtb \
> diff --git a/arch/arm64/boot/dts/google/gs101-oriole.dts b/arch/arm64/boot/dts/google/gs101-oriole.dts
> new file mode 100644
> index 000000000000..3bebca989d34
> --- /dev/null
> +++ b/arch/arm64/boot/dts/google/gs101-oriole.dts
> @@ -0,0 +1,79 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/*
> + * Oriole Device Tree
> + *
> + * Copyright 2021-2023 Google,LLC
> + */
> +
> +/dts-v1/;
> +/plugin/;
> +
> +#include <dt-bindings/gpio/gpio.h>
> +#include <dt-bindings/input/input.h>
> +#include "gs101-pinctrl.h"
> +#include "gs101.dtsi"
> +
> +/ {
> +	model = "Oriole";
> +	compatible = "google,gs101-oriole", "google,gs101";
> +
> +	chosen {
> +		bootargs = "earlycon=exynos4210,mmio32,0x10A00000 console=ttySAC0";


Nothing improved here.

> +	};
> +
> +	gpio-keys {
> +		compatible = "gpio-keys";
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&key_voldown &key_volup &key_power>;
> +
> +		button-vol-down {
> +			label = "KEY_VOLUMEDOWN";
> +			linux,code = <KEY_VOLUMEDOWN>;
> +			gpios = <&gpa7 3 GPIO_ACTIVE_LOW>;
> +			wakeup-source;
> +		};
> +
> +		button-vol-up {
> +			label = "KEY_VOLUMEUP";
> +			linux,code = <KEY_VOLUMEUP>;
> +			gpios = <&gpa8 1 GPIO_ACTIVE_LOW>;
> +			wakeup-source;
> +		};
> +
> +		button-power {
> +			label = "KEY_POWER";
> +			linux,code = <KEY_POWER>;
> +			gpios = <&gpa10 1 GPIO_ACTIVE_LOW>;
> +			wakeup-source;
> +		};
> +	};
> +};
> +
> +&pinctrl_1 {
> +	key_voldown: key-voldown-pins {
> +		samsung,pins = "gpa7-3";
> +		samsung,pin-function = <0xf>;

GS101_PIN_FUNC_EINT

> +		samsung,pin-pud = <0>;

GS101_PIN_PULL_NONE

> +		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
> +	};
> +
> +	key_volup: key-volup-pins {
> +		samsung,pins = "gpa8-1";
> +		samsung,pin-function = <0xf>;
> +		samsung,pin-pud = <0>;
> +		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
> +	};
> +};
> +
> +&pinctrl_0 {
> +	key_power: key-power-pins {
> +		samsung,pins = "gpa10-1";
> +		samsung,pin-function = <0xf>;
> +		samsung,pin-pud = <0>;


Best regards,
Krzysztof
Sam Protsenko Oct. 12, 2023, 7:40 a.m. UTC | #3
On Wed, Oct 11, 2023 at 1:49 PM Peter Griffin <peter.griffin@linaro.org> wrote:
>
> Add initial board support for the Pixel 6 phone code named Oriole. This
> has been tested with a minimal busybox initramfs and boots to a shell.
>
> Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
> ---
>  arch/arm64/boot/dts/google/Makefile         |  4 ++
>  arch/arm64/boot/dts/google/gs101-oriole.dts | 79 +++++++++++++++++++++
>  2 files changed, 83 insertions(+)
>  create mode 100644 arch/arm64/boot/dts/google/Makefile
>  create mode 100644 arch/arm64/boot/dts/google/gs101-oriole.dts
>
> diff --git a/arch/arm64/boot/dts/google/Makefile b/arch/arm64/boot/dts/google/Makefile
> new file mode 100644
> index 000000000000..5cea8ff27141
> --- /dev/null
> +++ b/arch/arm64/boot/dts/google/Makefile
> @@ -0,0 +1,4 @@
> +# SPDX-License-Identifier: GPL-2.0
> +
> +dtb-$(CONFIG_ARCH_GOOGLE_TENSOR) += \
> +       gs101-oriole.dtb \
> diff --git a/arch/arm64/boot/dts/google/gs101-oriole.dts b/arch/arm64/boot/dts/google/gs101-oriole.dts
> new file mode 100644
> index 000000000000..3bebca989d34
> --- /dev/null
> +++ b/arch/arm64/boot/dts/google/gs101-oriole.dts
> @@ -0,0 +1,79 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/*
> + * Oriole Device Tree
> + *
> + * Copyright 2021-2023 Google,LLC
> + */
> +
> +/dts-v1/;
> +/plugin/;

Why is this needed? Is that really not possible to build this board
dts as actual dtb, not dtbo (and remove this 'plugin' line)? If GS
bootloader is similar to Exynos850 bootloader, it should be possible
to only use dtb, and flash empty dtbo image. Just a thought.

> +
> +#include <dt-bindings/gpio/gpio.h>
> +#include <dt-bindings/input/input.h>
> +#include "gs101-pinctrl.h"
> +#include "gs101.dtsi"
> +
> +/ {
> +       model = "Oriole";
> +       compatible = "google,gs101-oriole", "google,gs101";
> +
> +       chosen {
> +               bootargs = "earlycon=exynos4210,mmio32,0x10A00000 console=ttySAC0";

Why is that earlycon is needed here? The serial should work fine (and
actually even better) without that. Might be very useful for debugging
though, but in production dts I'd remove that bit. Also, not sure why
console is needed. Isn't it enough to just have something like:

        stdout-path = &serial_0;

inside of /chosen node?

Btw, why isn't serial node enabled somewhere in this dts?

> +       };
> +
> +       gpio-keys {
> +               compatible = "gpio-keys";
> +               pinctrl-names = "default";
> +               pinctrl-0 = <&key_voldown &key_volup &key_power>;
> +
> +               button-vol-down {
> +                       label = "KEY_VOLUMEDOWN";
> +                       linux,code = <KEY_VOLUMEDOWN>;
> +                       gpios = <&gpa7 3 GPIO_ACTIVE_LOW>;
> +                       wakeup-source;
> +               };
> +
> +               button-vol-up {
> +                       label = "KEY_VOLUMEUP";
> +                       linux,code = <KEY_VOLUMEUP>;
> +                       gpios = <&gpa8 1 GPIO_ACTIVE_LOW>;
> +                       wakeup-source;
> +               };
> +
> +               button-power {
> +                       label = "KEY_POWER";
> +                       linux,code = <KEY_POWER>;
> +                       gpios = <&gpa10 1 GPIO_ACTIVE_LOW>;
> +                       wakeup-source;
> +               };
> +       };
> +};
> +
> +&pinctrl_1 {
> +       key_voldown: key-voldown-pins {
> +               samsung,pins = "gpa7-3";
> +               samsung,pin-function = <0xf>;
> +               samsung,pin-pud = <0>;

Here and further: maybe replace pid-function and pin-pud hard-coded
values with corresponding named constants?

> +               samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
> +       };
> +
> +       key_volup: key-volup-pins {
> +               samsung,pins = "gpa8-1";
> +               samsung,pin-function = <0xf>;
> +               samsung,pin-pud = <0>;
> +               samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
> +       };
> +};
> +
> +&pinctrl_0 {
> +       key_power: key-power-pins {
> +               samsung,pins = "gpa10-1";
> +               samsung,pin-function = <0xf>;
> +               samsung,pin-pud = <0>;
> +               samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
> +       };
> +};
> +
> +&watchdog_cl0 {
> +       timeout-sec = <30>;

No status = "okay" here? The same question goes for wdt_cl1.

> +};
> --
> 2.42.0.655.g421f12c284-goog
>
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/google/Makefile b/arch/arm64/boot/dts/google/Makefile
new file mode 100644
index 000000000000..5cea8ff27141
--- /dev/null
+++ b/arch/arm64/boot/dts/google/Makefile
@@ -0,0 +1,4 @@ 
+# SPDX-License-Identifier: GPL-2.0
+
+dtb-$(CONFIG_ARCH_GOOGLE_TENSOR) += \
+	gs101-oriole.dtb \
diff --git a/arch/arm64/boot/dts/google/gs101-oriole.dts b/arch/arm64/boot/dts/google/gs101-oriole.dts
new file mode 100644
index 000000000000..3bebca989d34
--- /dev/null
+++ b/arch/arm64/boot/dts/google/gs101-oriole.dts
@@ -0,0 +1,79 @@ 
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Oriole Device Tree
+ *
+ * Copyright 2021-2023 Google,LLC
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include "gs101-pinctrl.h"
+#include "gs101.dtsi"
+
+/ {
+	model = "Oriole";
+	compatible = "google,gs101-oriole", "google,gs101";
+
+	chosen {
+		bootargs = "earlycon=exynos4210,mmio32,0x10A00000 console=ttySAC0";
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&key_voldown &key_volup &key_power>;
+
+		button-vol-down {
+			label = "KEY_VOLUMEDOWN";
+			linux,code = <KEY_VOLUMEDOWN>;
+			gpios = <&gpa7 3 GPIO_ACTIVE_LOW>;
+			wakeup-source;
+		};
+
+		button-vol-up {
+			label = "KEY_VOLUMEUP";
+			linux,code = <KEY_VOLUMEUP>;
+			gpios = <&gpa8 1 GPIO_ACTIVE_LOW>;
+			wakeup-source;
+		};
+
+		button-power {
+			label = "KEY_POWER";
+			linux,code = <KEY_POWER>;
+			gpios = <&gpa10 1 GPIO_ACTIVE_LOW>;
+			wakeup-source;
+		};
+	};
+};
+
+&pinctrl_1 {
+	key_voldown: key-voldown-pins {
+		samsung,pins = "gpa7-3";
+		samsung,pin-function = <0xf>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	key_volup: key-volup-pins {
+		samsung,pins = "gpa8-1";
+		samsung,pin-function = <0xf>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+};
+
+&pinctrl_0 {
+	key_power: key-power-pins {
+		samsung,pins = "gpa10-1";
+		samsung,pin-function = <0xf>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+};
+
+&watchdog_cl0 {
+	timeout-sec = <30>;
+};