diff mbox series

[v3,02/20] dt-bindings: clock: Add Google gs101 clock management unit bindings

Message ID 20231011184823.443959-3-peter.griffin@linaro.org (mailing list archive)
State New
Headers show
Series Add minimal Tensor/GS101 SoC support and Oriole/Pixel6 board | expand

Commit Message

Peter Griffin Oct. 11, 2023, 6:48 p.m. UTC
Provide dt-schema documentation for Google gs101 SoC clock controller.
Currently this adds support for cmu_top, cmu_misc and cmu_apm.

Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
---
 .../bindings/clock/google,gs101-clock.yaml    | 125 ++++++++++
 include/dt-bindings/clock/google,gs101.h      | 232 ++++++++++++++++++
 2 files changed, 357 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/clock/google,gs101-clock.yaml
 create mode 100644 include/dt-bindings/clock/google,gs101.h

Comments

William McVicker Oct. 11, 2023, 9:48 p.m. UTC | #1
On 10/11/2023, Peter Griffin wrote:
> Provide dt-schema documentation for Google gs101 SoC clock controller.
> Currently this adds support for cmu_top, cmu_misc and cmu_apm.
> 
> Signed-off-by: Peter Griffin <peter.griffin@linaro.org>

Tested-by: Will McVicker <willmcvicker@google.com>

Thanks,
Will

> ---
>  .../bindings/clock/google,gs101-clock.yaml    | 125 ++++++++++
>  include/dt-bindings/clock/google,gs101.h      | 232 ++++++++++++++++++
>  2 files changed, 357 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/clock/google,gs101-clock.yaml
>  create mode 100644 include/dt-bindings/clock/google,gs101.h
> 
> diff --git a/Documentation/devicetree/bindings/clock/google,gs101-clock.yaml b/Documentation/devicetree/bindings/clock/google,gs101-clock.yaml
> new file mode 100644
> index 000000000000..f74494594b3b
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/clock/google,gs101-clock.yaml
> @@ -0,0 +1,125 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/clock/google,gs101-clock.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Google GS101 SoC clock controller
> +
> +maintainers:
> +  - Peter Griffin <peter.griffin@linaro.org>
> +
> +description: |
> +  Google GS101 clock controller is comprised of several CMU units, generating
> +  clocks for different domains. Those CMU units are modeled as separate device
> +  tree nodes, and might depend on each other. The root clock in that clock tree
> +  is OSCCLK (24.576 MHz). That external clock must be defined as a fixed-rate
> +  clock in dts.
> +
> +  CMU_TOP is a top-level CMU, where all base clocks are prepared using PLLs and
> +  dividers; all other leaf clocks (other CMUs) are usually derived from CMU_TOP.
> +
> +  Each clock is assigned an identifier and client nodes can use this identifier
> +  to specify the clock which they consume. All clocks available for usage
> +  in clock consumer nodes are defined as preprocessor macros in
> +  'dt-bindings/clock/gs101.h' header.
> +
> +properties:
> +  compatible:
> +    enum:
> +      - google,gs101-cmu-top
> +      - google,gs101-cmu-apm
> +      - google,gs101-cmu-misc
> +
> +  clocks:
> +    minItems: 1
> +    maxItems: 2
> +
> +  clock-names:
> +    minItems: 1
> +    maxItems: 2
> +
> +  "#clock-cells":
> +    const: 1
> +
> +  reg:
> +    maxItems: 1
> +
> +allOf:
> +  - if:
> +      properties:
> +        compatible:
> +          contains:
> +            const: google,gs101-cmu-top
> +
> +    then:
> +      properties:
> +        clocks:
> +          items:
> +            - description: External reference clock (24.576 MHz)
> +
> +        clock-names:
> +          items:
> +            - const: oscclk
> +
> +  - if:
> +      properties:
> +        compatible:
> +          contains:
> +            const: google,gs101-cmu-misc
> +
> +    then:
> +      properties:
> +        clocks:
> +          items:
> +            - description: External reference clock (24.576 MHz)
> +            - description: Misc bus clock (from CMU_TOP)
> +
> +        clock-names:
> +          items:
> +            - const: oscclk
> +            - const: dout_cmu_misc_bus
> +
> +  - if:
> +      properties:
> +        compatible:
> +          contains:
> +            const: google,gs101-cmu-apm
> +
> +    then:
> +      properties:
> +        clocks:
> +          items:
> +            - description: External reference clock (24.576 MHz)
> +
> +        clock-names:
> +          items:
> +            - const: oscclk
> +
> +required:
> +  - compatible
> +  - "#clock-cells"
> +  - clocks
> +  - clock-names
> +  - reg
> +
> +additionalProperties: false
> +
> +examples:
> +  # Clock controller node for CMU_TOP
> +  - |
> +    #include <dt-bindings/clock/google,gs101.h>
> +    soc {
> +        #address-cells = <2>;
> +        #size-cells = <1>;
> +
> +        cmu_top: clock-controller@1e080000 {
> +            compatible = "google,gs101-cmu-top";
> +            reg = <0x0 0x1e080000 0x8000>;
> +            #clock-cells = <1>;
> +            clocks = <&ext_24_5m>;
> +            clock-names = "oscclk";
> +        };
> +    };
> +
> +...
> diff --git a/include/dt-bindings/clock/google,gs101.h b/include/dt-bindings/clock/google,gs101.h
> new file mode 100644
> index 000000000000..7765ba68f734
> --- /dev/null
> +++ b/include/dt-bindings/clock/google,gs101.h
> @@ -0,0 +1,232 @@
> +/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */
> +/*
> + * Copyright (C) 2023 Linaro Ltd.
> + * Author: Peter Griffin <peter.griffin@linaro.org>
> + *
> + * Device Tree binding constants for Google gs101 clock controller.
> + */
> +
> +#ifndef _DT_BINDINGS_CLOCK_GOOGLE_GS101_H
> +#define _DT_BINDINGS_CLOCK_GOOGLE_GS101_H
> +
> +/* CMU_TOP PLL*/
> +#define CLK_FOUT_SHARED0_PLL		1
> +#define CLK_FOUT_SHARED1_PLL		2
> +#define CLK_FOUT_SHARED2_PLL		3
> +#define CLK_FOUT_SHARED3_PLL		4
> +#define CLK_FOUT_SPARE_PLL		5
> +
> +/* CMU_TOP MUX*/
> +#define CLK_MOUT_SHARED0_PLL		6
> +#define CLK_MOUT_SHARED1_PLL		7
> +#define CLK_MOUT_SHARED2_PLL		8
> +#define CLK_MOUT_SHARED3_PLL		9
> +#define CLK_MOUT_SPARE_PLL		10
> +#define CLK_MOUT_BUS0_BUS		11
> +#define CLK_MOUT_CMU_BOOST		12
> +#define CLK_MOUT_BUS1_BUS		13
> +#define CLK_MOUT_BUS2_BUS		14
> +#define CLK_MOUT_CORE_BUS		15
> +#define CLK_MOUT_EH_BUS			16
> +#define CLK_MOUT_CPUCL2_SWITCH		17
> +#define CLK_MOUT_CPUCL1_SWITCH		18
> +#define CLK_MOUT_CPUCL0_SWITCH		19
> +#define CLK_MOUT_CPUCL0_DBG		20
> +#define CLK_MOUT_CMU_HPM		21
> +#define CLK_MOUT_G3D_SWITCH		22
> +#define CLK_MOUT_G3D_GLB		23
> +#define CLK_MOUT_DPU_BUS		24
> +#define CLK_MOUT_DISP_BUS		25
> +#define CLK_MOUT_G2D_G2D		26
> +#define CLK_MOUT_G2D_MSCL		27
> +#define CLK_MOUT_HSI0_USB31DRD		28
> +#define CLK_MOUT_HSI0_BUS		29
> +#define CLK_MOUT_HSI0_DPGTC		30
> +#define CLK_MOUT_HSI0_USBDPDGB		31
> +#define CLK_MOUT_HSI1_BUS		32
> +#define CLK_MOUT_HSI1_PCIE		33
> +#define CLK_MOUT_HSI2_BUS		34
> +#define CLK_MOUT_HSI2_PCIE		35
> +#define CLK_MOUT_HSI2_UFS_EMBD		36
> +#define CLK_MOUT_HSI2_MMC_CARD		37
> +#define CLK_MOUT_CSIS			38
> +#define CLK_MOUT_PDP_BUS		39
> +#define CLK_MOUT_PDP_VRA		40
> +#define CLK_MOUT_IPP_BUS		41
> +#define CLK_MOUT_G3AA			42
> +#define CLK_MOUT_ITP			43
> +#define CLK_MOUT_DNS_BUS		44
> +#define CLK_MOUT_TNR_BUS		45
> +#define CLK_MOUT_MCSC_ITSC		46
> +#define CLK_MOUT_MCSC_MCSC		47
> +#define CLK_MOUT_GDC_SCSC		48
> +#define CLK_MOUT_GDC_GDC0		49
> +#define CLK_MOUT_GDC_GDC1		50
> +#define CLK_MOUT_MFC_MFC		51
> +#define CLK_MOUT_MIF_SWITCH		52
> +#define CLK_MOUT_MIF_BUS		53
> +#define CLK_MOUT_MISC_BUS		54
> +#define CLK_MOUT_MISC_SSS		55
> +#define CLK_MOUT_PERIC0_IP		56
> +#define CLK_MOUT_PERIC0_BUS		57
> +#define CLK_MOUT_PERIC1_IP		58
> +#define CLK_MOUT_PERIC1_BUS		59
> +#define CLK_MOUT_TPU_TPU		60
> +#define CLK_MOUT_TPU_TPUCTL		61
> +#define CLK_MOUT_TPU_BUS		62
> +#define CLK_MOUT_TPU_UART		63
> +#define CLK_MOUT_TPU_HPM		64
> +#define CLK_MOUT_BO_BUS			65
> +#define CLK_MOUT_G3D_BUSD		66
> +
> +/* CMU_TOP Dividers*/
> +#define CLK_DOUT_SHARED0_DIV3		67
> +#define CLK_DOUT_SHARED0_DIV2		68
> +#define CLK_DOUT_SHARED0_DIV4		69
> +#define CLK_DOUT_SHARED0_DIV5		70
> +#define CLK_DOUT_SHARED1_DIV3		71
> +#define CLK_DOUT_SHARED1_DIV2		72
> +#define CLK_DOUT_SHARED1_DIV4		73
> +#define CLK_DOUT_SHARED2_DIV2		74
> +#define CLK_DOUT_SHARED3_DIV2		75
> +#define CLK_DOUT_BUS0_BUS		76
> +#define CLK_DOUT_CMU_BOOST		77
> +#define CLK_DOUT_BUS1_BUS		78
> +#define CLK_DOUT_BUS2_BUS		79
> +#define CLK_DOUT_CORE_BUS		80
> +#define CLK_DOUT_EH_BUS			81
> +#define CLK_DOUT_CPUCL2_SWITCH		82
> +#define CLK_DOUT_CPUCL1_SWITCH		83
> +#define CLK_DOUT_CPUCL0_SWITCH		84
> +#define CLK_DOUT_CPUCL0_DBG		85
> +#define CLK_DOUT_CMU_HPM		86
> +#define CLK_DOUT_G3D_SWITCH		87
> +#define CLK_DOUT_G3D_GLB		88
> +#define CLK_DOUT_DPU_BUS		89
> +#define CLK_DOUT_DISP_BUS		90
> +#define CLK_DOUT_G2D_G2D		91
> +#define CLK_DOUT_G2D_MSCL		92
> +#define CLK_DOUT_HSI0_USB31DRD		93
> +#define CLK_DOUT_HSI0_BUS		94
> +#define CLK_DOUT_HSI0_DPGTC		95
> +#define CLK_DOUT_HSI0_USBDPDGB		96
> +#define CLK_DOUT_HSI1_BUS		97
> +#define CLK_DOUT_HSI1_PCIE		98
> +#define CLK_DOUT_HSI2_BUS		100
> +#define CLK_DOUT_HSI2_PCIE		101
> +#define CLK_DOUT_HSI2_UFS_EMBD		102
> +#define CLK_DOUT_HSI2_MMC_CARD		103
> +#define CLK_DOUT_CSIS			104
> +#define CLK_DOUT_PDP_BUS		105
> +#define CLK_DOUT_PDP_VRA		106
> +#define CLK_DOUT_IPP_BUS		107
> +#define CLK_DOUT_G3AA			108
> +#define CLK_DOUT_ITP			109
> +#define CLK_DOUT_DNS_BUS		110
> +#define CLK_DOUT_TNR_BUS		111
> +#define CLK_DOUT_MCSC_ITSC		112
> +#define CLK_DOUT_MCSC_MCSC		113
> +#define CLK_DOUT_GDC_SCSC		114
> +#define CLK_DOUT_GDC_GDC0		115
> +#define CLK_DOUT_GDC_GDC1		116
> +#define CLK_DOUT_MFC_MFC		117
> +#define CLK_DOUT_MIF_BUS		118
> +#define CLK_DOUT_MISC_BUS		119
> +#define CLK_DOUT_MISC_SSS		120
> +#define CLK_DOUT_PERIC0_BUS		121
> +#define CLK_DOUT_PERIC0_IP		122
> +#define CLK_DOUT_PERIC1_BUS		123
> +#define CLK_DOUT_PERIC1_IP		124
> +#define CLK_DOUT_TPU_TPU		125
> +#define CLK_DOUT_TPU_TPUCTL		126
> +#define CLK_DOUT_TPU_BUS		127
> +#define CLK_DOUT_TPU_UART		128
> +#define CLK_DOUT_TPU_HPM		129
> +#define CLK_DOUT_BO_BUS			130
> +
> +/* CMU_TOP Gates*/
> +#define CLK_GOUT_BUS0_BUS		131
> +#define CLK_GOUT_BUS1_BUS		132
> +#define CLK_GOUT_BUS2_BUS		133
> +#define CLK_GOUT_CORE_BUS		134
> +#define CLK_GOUT_EH_BUS			135
> +#define CLK_GOUT_CPUCL2_SWITCH		136
> +#define CLK_GOUT_CPUCL1_SWITCH		137
> +#define CLK_GOUT_CPUCL0_SWITCH		138
> +#define CLK_GOUT_CPUCL0_DBG		139
> +#define CLK_GOUT_CMU_HPM		140
> +#define CLK_GOUT_G3D_SWITCH		141
> +#define CLK_GOUT_G3D_GLB		142
> +#define CLK_GOUT_DPU_BUS		143
> +#define CLK_GOUT_DISP_BUS		144
> +#define CLK_GOUT_G2D_G2D		145
> +#define CLK_GOUT_G2D_MSCL		146
> +#define CLK_GOUT_HSI0_USB31DRD		147
> +#define CLK_GOUT_HSI0_BUS		148
> +#define CLK_GOUT_HSI0_DPGTC		149
> +#define CLK_GOUT_HSI0_USBDPDGB		150
> +#define CLK_GOUT_HSI1_BUS		151
> +#define CLK_GOUT_HSI1_PCIE		152
> +#define CLK_GOUT_HSI2_BUS		153
> +#define CLK_GOUT_HSI2_PCIE		154
> +#define CLK_GOUT_HSI2_UFS_EMBD		155
> +#define CLK_GOUT_HSI2_MMC_CARD		156
> +#define CLK_GOUT_CSIS			157
> +#define CLK_GOUT_PDP_BUS		158
> +#define CLK_GOUT_PDP_VRA		159
> +#define CLK_GOUT_IPP_BUS		160
> +#define CLK_GOUT_G3AA			161
> +#define CLK_GOUT_ITP			162
> +#define CLK_GOUT_DNS_BUS		163
> +#define CLK_GOUT_TNR_BUS		164
> +#define CLK_GOUT_MCSC_ITSC		165
> +#define CLK_GOUT_MCSC_MCSC		166
> +#define CLK_GOUT_GDC_SCSC		167
> +#define CLK_GOUT_GDC_GDC0		168
> +#define CLK_GOUT_GDC_GDC1		169
> +#define CLK_GOUT_MFC_MFC		170
> +#define CLK_GOUT_MIF_SWITCH		171
> +#define CLK_GOUT_MIF_BUS		172
> +#define CLK_GOUT_MISC_BUS		173
> +#define CLK_GOUT_MISC_SSS		174
> +#define CLK_GOUT_PERIC0_BUS		175
> +#define CLK_GOUT_PERIC0_IP		176
> +#define CLK_GOUT_PERIC1_BUS		177
> +#define CLK_GOUT_PERIC1_IP		178
> +#define CLK_GOUT_TPU_TPU		179
> +#define CLK_GOUT_TPU_TPUCTL		180
> +#define CLK_GOUT_TPU_BUS		181
> +#define CLK_GOUT_TPU_UART		182
> +#define CLK_GOUT_TPU_HPM		183
> +#define CLK_GOUT_BO_BUS			184
> +#define CLK_GOUT_CMU_BOOST		185
> +
> +/* CMU_APM */
> +
> +#define CLK_MOUT_APM_FUNC					1
> +#define CLK_MOUT_APM_FUNCSRC					2
> +#define CLK_DOUT_APM_BOOST					3
> +#define CLK_DOUT_APM_USI0_UART					4
> +#define CLK_DOUT_APM_USI0_USI					5
> +#define CLK_DOUT_APM_USI1_UART					6
> +#define CLK_GOUT_APM_FUNC					7
> +#define CLK_GOUT_APM_UID_APBIF_GPIO_ALIVE_IPCLKPORT_PCLK	8
> +#define CLK_GOUT_APM_UID_APBIF_GPIO_FAR_ALIVE_IPCLKPORT_PCLK	9
> +#define CLK_GOUT_APM_UID_APBIF_PMU_ALIVE_IPCLKPORT_PCLK		10
> +#define CLK_GOUT_APM_UID_SYSREG_APM_IPCLKPORT_PCLK		11
> +#define CLK_APM_PLL_DIV2_APM					12
> +#define CLK_APM_PLL_DIV4_APM					13
> +#define CLK_APM_PLL_DIV16_APM					14
> +
> +/* CMU_MISC */
> +
> +#define CLK_MOUT_MISC_BUS_USER					1
> +#define CLK_MOUT_MISC_SSS_USER					2
> +#define CLK_DOUT_MISC_BUSP					3
> +#define CLK_DOUT_MISC_GIC					4
> +#define CLK_GOUT_MISC_PCLK					5
> +#define CLK_GOUT_MISC_SYSREG_PCLK				6
> +#define CLK_GOUT_MISC_WDT_CLUSTER0				7
> +#define CLK_GOUT_MISC_WDT_CLUSTER1				8
> +
> +#endif /* _DT_BINDINGS_CLOCK_GOOGLE_GS101_H */
> -- 
> 2.42.0.655.g421f12c284-goog
>
Sam Protsenko Oct. 11, 2023, 10:55 p.m. UTC | #2
On Wed, Oct 11, 2023 at 1:49 PM Peter Griffin <peter.griffin@linaro.org> wrote:
>
> Provide dt-schema documentation for Google gs101 SoC clock controller.
> Currently this adds support for cmu_top, cmu_misc and cmu_apm.
>
> Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
> ---

Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>

>  .../bindings/clock/google,gs101-clock.yaml    | 125 ++++++++++
>  include/dt-bindings/clock/google,gs101.h      | 232 ++++++++++++++++++
>  2 files changed, 357 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/clock/google,gs101-clock.yaml
>  create mode 100644 include/dt-bindings/clock/google,gs101.h
>
> diff --git a/Documentation/devicetree/bindings/clock/google,gs101-clock.yaml b/Documentation/devicetree/bindings/clock/google,gs101-clock.yaml
> new file mode 100644
> index 000000000000..f74494594b3b
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/clock/google,gs101-clock.yaml
> @@ -0,0 +1,125 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/clock/google,gs101-clock.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Google GS101 SoC clock controller
> +
> +maintainers:
> +  - Peter Griffin <peter.griffin@linaro.org>
> +
> +description: |
> +  Google GS101 clock controller is comprised of several CMU units, generating
> +  clocks for different domains. Those CMU units are modeled as separate device
> +  tree nodes, and might depend on each other. The root clock in that clock tree
> +  is OSCCLK (24.576 MHz). That external clock must be defined as a fixed-rate
> +  clock in dts.
> +
> +  CMU_TOP is a top-level CMU, where all base clocks are prepared using PLLs and
> +  dividers; all other leaf clocks (other CMUs) are usually derived from CMU_TOP.
> +
> +  Each clock is assigned an identifier and client nodes can use this identifier
> +  to specify the clock which they consume. All clocks available for usage
> +  in clock consumer nodes are defined as preprocessor macros in
> +  'dt-bindings/clock/gs101.h' header.
> +
> +properties:
> +  compatible:
> +    enum:
> +      - google,gs101-cmu-top
> +      - google,gs101-cmu-apm
> +      - google,gs101-cmu-misc
> +
> +  clocks:
> +    minItems: 1
> +    maxItems: 2
> +
> +  clock-names:
> +    minItems: 1
> +    maxItems: 2
> +
> +  "#clock-cells":
> +    const: 1
> +
> +  reg:
> +    maxItems: 1
> +
> +allOf:
> +  - if:
> +      properties:
> +        compatible:
> +          contains:
> +            const: google,gs101-cmu-top
> +
> +    then:
> +      properties:
> +        clocks:
> +          items:
> +            - description: External reference clock (24.576 MHz)
> +
> +        clock-names:
> +          items:
> +            - const: oscclk
> +
> +  - if:
> +      properties:
> +        compatible:
> +          contains:
> +            const: google,gs101-cmu-misc
> +
> +    then:
> +      properties:
> +        clocks:
> +          items:
> +            - description: External reference clock (24.576 MHz)
> +            - description: Misc bus clock (from CMU_TOP)
> +
> +        clock-names:
> +          items:
> +            - const: oscclk
> +            - const: dout_cmu_misc_bus
> +
> +  - if:
> +      properties:
> +        compatible:
> +          contains:
> +            const: google,gs101-cmu-apm
> +
> +    then:
> +      properties:
> +        clocks:
> +          items:
> +            - description: External reference clock (24.576 MHz)
> +
> +        clock-names:
> +          items:
> +            - const: oscclk
> +
> +required:
> +  - compatible
> +  - "#clock-cells"
> +  - clocks
> +  - clock-names
> +  - reg
> +
> +additionalProperties: false
> +
> +examples:
> +  # Clock controller node for CMU_TOP
> +  - |
> +    #include <dt-bindings/clock/google,gs101.h>
> +    soc {
> +        #address-cells = <2>;
> +        #size-cells = <1>;
> +
> +        cmu_top: clock-controller@1e080000 {
> +            compatible = "google,gs101-cmu-top";
> +            reg = <0x0 0x1e080000 0x8000>;
> +            #clock-cells = <1>;
> +            clocks = <&ext_24_5m>;
> +            clock-names = "oscclk";
> +        };
> +    };
> +
> +...
> diff --git a/include/dt-bindings/clock/google,gs101.h b/include/dt-bindings/clock/google,gs101.h
> new file mode 100644
> index 000000000000..7765ba68f734
> --- /dev/null
> +++ b/include/dt-bindings/clock/google,gs101.h
> @@ -0,0 +1,232 @@
> +/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */
> +/*
> + * Copyright (C) 2023 Linaro Ltd.
> + * Author: Peter Griffin <peter.griffin@linaro.org>
> + *
> + * Device Tree binding constants for Google gs101 clock controller.
> + */
> +
> +#ifndef _DT_BINDINGS_CLOCK_GOOGLE_GS101_H
> +#define _DT_BINDINGS_CLOCK_GOOGLE_GS101_H
> +
> +/* CMU_TOP PLL*/
> +#define CLK_FOUT_SHARED0_PLL           1
> +#define CLK_FOUT_SHARED1_PLL           2
> +#define CLK_FOUT_SHARED2_PLL           3
> +#define CLK_FOUT_SHARED3_PLL           4
> +#define CLK_FOUT_SPARE_PLL             5
> +
> +/* CMU_TOP MUX*/
> +#define CLK_MOUT_SHARED0_PLL           6
> +#define CLK_MOUT_SHARED1_PLL           7
> +#define CLK_MOUT_SHARED2_PLL           8
> +#define CLK_MOUT_SHARED3_PLL           9
> +#define CLK_MOUT_SPARE_PLL             10
> +#define CLK_MOUT_BUS0_BUS              11
> +#define CLK_MOUT_CMU_BOOST             12
> +#define CLK_MOUT_BUS1_BUS              13
> +#define CLK_MOUT_BUS2_BUS              14
> +#define CLK_MOUT_CORE_BUS              15
> +#define CLK_MOUT_EH_BUS                        16
> +#define CLK_MOUT_CPUCL2_SWITCH         17
> +#define CLK_MOUT_CPUCL1_SWITCH         18
> +#define CLK_MOUT_CPUCL0_SWITCH         19
> +#define CLK_MOUT_CPUCL0_DBG            20
> +#define CLK_MOUT_CMU_HPM               21
> +#define CLK_MOUT_G3D_SWITCH            22
> +#define CLK_MOUT_G3D_GLB               23
> +#define CLK_MOUT_DPU_BUS               24
> +#define CLK_MOUT_DISP_BUS              25
> +#define CLK_MOUT_G2D_G2D               26
> +#define CLK_MOUT_G2D_MSCL              27
> +#define CLK_MOUT_HSI0_USB31DRD         28
> +#define CLK_MOUT_HSI0_BUS              29
> +#define CLK_MOUT_HSI0_DPGTC            30
> +#define CLK_MOUT_HSI0_USBDPDGB         31
> +#define CLK_MOUT_HSI1_BUS              32
> +#define CLK_MOUT_HSI1_PCIE             33
> +#define CLK_MOUT_HSI2_BUS              34
> +#define CLK_MOUT_HSI2_PCIE             35
> +#define CLK_MOUT_HSI2_UFS_EMBD         36
> +#define CLK_MOUT_HSI2_MMC_CARD         37
> +#define CLK_MOUT_CSIS                  38
> +#define CLK_MOUT_PDP_BUS               39
> +#define CLK_MOUT_PDP_VRA               40
> +#define CLK_MOUT_IPP_BUS               41
> +#define CLK_MOUT_G3AA                  42
> +#define CLK_MOUT_ITP                   43
> +#define CLK_MOUT_DNS_BUS               44
> +#define CLK_MOUT_TNR_BUS               45
> +#define CLK_MOUT_MCSC_ITSC             46
> +#define CLK_MOUT_MCSC_MCSC             47
> +#define CLK_MOUT_GDC_SCSC              48
> +#define CLK_MOUT_GDC_GDC0              49
> +#define CLK_MOUT_GDC_GDC1              50
> +#define CLK_MOUT_MFC_MFC               51
> +#define CLK_MOUT_MIF_SWITCH            52
> +#define CLK_MOUT_MIF_BUS               53
> +#define CLK_MOUT_MISC_BUS              54
> +#define CLK_MOUT_MISC_SSS              55
> +#define CLK_MOUT_PERIC0_IP             56
> +#define CLK_MOUT_PERIC0_BUS            57
> +#define CLK_MOUT_PERIC1_IP             58
> +#define CLK_MOUT_PERIC1_BUS            59
> +#define CLK_MOUT_TPU_TPU               60
> +#define CLK_MOUT_TPU_TPUCTL            61
> +#define CLK_MOUT_TPU_BUS               62
> +#define CLK_MOUT_TPU_UART              63
> +#define CLK_MOUT_TPU_HPM               64
> +#define CLK_MOUT_BO_BUS                        65
> +#define CLK_MOUT_G3D_BUSD              66
> +
> +/* CMU_TOP Dividers*/
> +#define CLK_DOUT_SHARED0_DIV3          67
> +#define CLK_DOUT_SHARED0_DIV2          68
> +#define CLK_DOUT_SHARED0_DIV4          69
> +#define CLK_DOUT_SHARED0_DIV5          70
> +#define CLK_DOUT_SHARED1_DIV3          71
> +#define CLK_DOUT_SHARED1_DIV2          72
> +#define CLK_DOUT_SHARED1_DIV4          73
> +#define CLK_DOUT_SHARED2_DIV2          74
> +#define CLK_DOUT_SHARED3_DIV2          75
> +#define CLK_DOUT_BUS0_BUS              76
> +#define CLK_DOUT_CMU_BOOST             77
> +#define CLK_DOUT_BUS1_BUS              78
> +#define CLK_DOUT_BUS2_BUS              79
> +#define CLK_DOUT_CORE_BUS              80
> +#define CLK_DOUT_EH_BUS                        81
> +#define CLK_DOUT_CPUCL2_SWITCH         82
> +#define CLK_DOUT_CPUCL1_SWITCH         83
> +#define CLK_DOUT_CPUCL0_SWITCH         84
> +#define CLK_DOUT_CPUCL0_DBG            85
> +#define CLK_DOUT_CMU_HPM               86
> +#define CLK_DOUT_G3D_SWITCH            87
> +#define CLK_DOUT_G3D_GLB               88
> +#define CLK_DOUT_DPU_BUS               89
> +#define CLK_DOUT_DISP_BUS              90
> +#define CLK_DOUT_G2D_G2D               91
> +#define CLK_DOUT_G2D_MSCL              92
> +#define CLK_DOUT_HSI0_USB31DRD         93
> +#define CLK_DOUT_HSI0_BUS              94
> +#define CLK_DOUT_HSI0_DPGTC            95
> +#define CLK_DOUT_HSI0_USBDPDGB         96
> +#define CLK_DOUT_HSI1_BUS              97
> +#define CLK_DOUT_HSI1_PCIE             98
> +#define CLK_DOUT_HSI2_BUS              100
> +#define CLK_DOUT_HSI2_PCIE             101
> +#define CLK_DOUT_HSI2_UFS_EMBD         102
> +#define CLK_DOUT_HSI2_MMC_CARD         103
> +#define CLK_DOUT_CSIS                  104
> +#define CLK_DOUT_PDP_BUS               105
> +#define CLK_DOUT_PDP_VRA               106
> +#define CLK_DOUT_IPP_BUS               107
> +#define CLK_DOUT_G3AA                  108
> +#define CLK_DOUT_ITP                   109
> +#define CLK_DOUT_DNS_BUS               110
> +#define CLK_DOUT_TNR_BUS               111
> +#define CLK_DOUT_MCSC_ITSC             112
> +#define CLK_DOUT_MCSC_MCSC             113
> +#define CLK_DOUT_GDC_SCSC              114
> +#define CLK_DOUT_GDC_GDC0              115
> +#define CLK_DOUT_GDC_GDC1              116
> +#define CLK_DOUT_MFC_MFC               117
> +#define CLK_DOUT_MIF_BUS               118
> +#define CLK_DOUT_MISC_BUS              119
> +#define CLK_DOUT_MISC_SSS              120
> +#define CLK_DOUT_PERIC0_BUS            121
> +#define CLK_DOUT_PERIC0_IP             122
> +#define CLK_DOUT_PERIC1_BUS            123
> +#define CLK_DOUT_PERIC1_IP             124
> +#define CLK_DOUT_TPU_TPU               125
> +#define CLK_DOUT_TPU_TPUCTL            126
> +#define CLK_DOUT_TPU_BUS               127
> +#define CLK_DOUT_TPU_UART              128
> +#define CLK_DOUT_TPU_HPM               129
> +#define CLK_DOUT_BO_BUS                        130
> +
> +/* CMU_TOP Gates*/
> +#define CLK_GOUT_BUS0_BUS              131
> +#define CLK_GOUT_BUS1_BUS              132
> +#define CLK_GOUT_BUS2_BUS              133
> +#define CLK_GOUT_CORE_BUS              134
> +#define CLK_GOUT_EH_BUS                        135
> +#define CLK_GOUT_CPUCL2_SWITCH         136
> +#define CLK_GOUT_CPUCL1_SWITCH         137
> +#define CLK_GOUT_CPUCL0_SWITCH         138
> +#define CLK_GOUT_CPUCL0_DBG            139
> +#define CLK_GOUT_CMU_HPM               140
> +#define CLK_GOUT_G3D_SWITCH            141
> +#define CLK_GOUT_G3D_GLB               142
> +#define CLK_GOUT_DPU_BUS               143
> +#define CLK_GOUT_DISP_BUS              144
> +#define CLK_GOUT_G2D_G2D               145
> +#define CLK_GOUT_G2D_MSCL              146
> +#define CLK_GOUT_HSI0_USB31DRD         147
> +#define CLK_GOUT_HSI0_BUS              148
> +#define CLK_GOUT_HSI0_DPGTC            149
> +#define CLK_GOUT_HSI0_USBDPDGB         150
> +#define CLK_GOUT_HSI1_BUS              151
> +#define CLK_GOUT_HSI1_PCIE             152
> +#define CLK_GOUT_HSI2_BUS              153
> +#define CLK_GOUT_HSI2_PCIE             154
> +#define CLK_GOUT_HSI2_UFS_EMBD         155
> +#define CLK_GOUT_HSI2_MMC_CARD         156
> +#define CLK_GOUT_CSIS                  157
> +#define CLK_GOUT_PDP_BUS               158
> +#define CLK_GOUT_PDP_VRA               159
> +#define CLK_GOUT_IPP_BUS               160
> +#define CLK_GOUT_G3AA                  161
> +#define CLK_GOUT_ITP                   162
> +#define CLK_GOUT_DNS_BUS               163
> +#define CLK_GOUT_TNR_BUS               164
> +#define CLK_GOUT_MCSC_ITSC             165
> +#define CLK_GOUT_MCSC_MCSC             166
> +#define CLK_GOUT_GDC_SCSC              167
> +#define CLK_GOUT_GDC_GDC0              168
> +#define CLK_GOUT_GDC_GDC1              169
> +#define CLK_GOUT_MFC_MFC               170
> +#define CLK_GOUT_MIF_SWITCH            171
> +#define CLK_GOUT_MIF_BUS               172
> +#define CLK_GOUT_MISC_BUS              173
> +#define CLK_GOUT_MISC_SSS              174
> +#define CLK_GOUT_PERIC0_BUS            175
> +#define CLK_GOUT_PERIC0_IP             176
> +#define CLK_GOUT_PERIC1_BUS            177
> +#define CLK_GOUT_PERIC1_IP             178
> +#define CLK_GOUT_TPU_TPU               179
> +#define CLK_GOUT_TPU_TPUCTL            180
> +#define CLK_GOUT_TPU_BUS               181
> +#define CLK_GOUT_TPU_UART              182
> +#define CLK_GOUT_TPU_HPM               183
> +#define CLK_GOUT_BO_BUS                        184
> +#define CLK_GOUT_CMU_BOOST             185
> +
> +/* CMU_APM */
> +
> +#define CLK_MOUT_APM_FUNC                                      1
> +#define CLK_MOUT_APM_FUNCSRC                                   2
> +#define CLK_DOUT_APM_BOOST                                     3
> +#define CLK_DOUT_APM_USI0_UART                                 4
> +#define CLK_DOUT_APM_USI0_USI                                  5
> +#define CLK_DOUT_APM_USI1_UART                                 6
> +#define CLK_GOUT_APM_FUNC                                      7
> +#define CLK_GOUT_APM_UID_APBIF_GPIO_ALIVE_IPCLKPORT_PCLK       8
> +#define CLK_GOUT_APM_UID_APBIF_GPIO_FAR_ALIVE_IPCLKPORT_PCLK   9
> +#define CLK_GOUT_APM_UID_APBIF_PMU_ALIVE_IPCLKPORT_PCLK                10
> +#define CLK_GOUT_APM_UID_SYSREG_APM_IPCLKPORT_PCLK             11
> +#define CLK_APM_PLL_DIV2_APM                                   12
> +#define CLK_APM_PLL_DIV4_APM                                   13
> +#define CLK_APM_PLL_DIV16_APM                                  14
> +
> +/* CMU_MISC */
> +
> +#define CLK_MOUT_MISC_BUS_USER                                 1
> +#define CLK_MOUT_MISC_SSS_USER                                 2
> +#define CLK_DOUT_MISC_BUSP                                     3
> +#define CLK_DOUT_MISC_GIC                                      4
> +#define CLK_GOUT_MISC_PCLK                                     5
> +#define CLK_GOUT_MISC_SYSREG_PCLK                              6
> +#define CLK_GOUT_MISC_WDT_CLUSTER0                             7
> +#define CLK_GOUT_MISC_WDT_CLUSTER1                             8
> +
> +#endif /* _DT_BINDINGS_CLOCK_GOOGLE_GS101_H */
> --
> 2.42.0.655.g421f12c284-goog
>
Krzysztof Kozlowski Oct. 12, 2023, 6:07 a.m. UTC | #3
On 11/10/2023 23:48, William McVicker wrote:
> On 10/11/2023, Peter Griffin wrote:
>> Provide dt-schema documentation for Google gs101 SoC clock controller.
>> Currently this adds support for cmu_top, cmu_misc and cmu_apm.
>>
>> Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
> 
> Tested-by: Will McVicker <willmcvicker@google.com>

And how do you perform testing of a binding?

Best regards,
Krzysztof
Krzysztof Kozlowski Oct. 12, 2023, 6:11 a.m. UTC | #4
On 11/10/2023 20:48, Peter Griffin wrote:
> Provide dt-schema documentation for Google gs101 SoC clock controller.
> Currently this adds support for cmu_top, cmu_misc and cmu_apm.
> 
> Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
> ---
>  .../bindings/clock/google,gs101-clock.yaml    | 125 ++++++++++
>  include/dt-bindings/clock/google,gs101.h      | 232 ++++++++++++++++++
>  2 files changed, 357 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/clock/google,gs101-clock.yaml
>  create mode 100644 include/dt-bindings/clock/google,gs101.h
> 
> diff --git a/Documentation/devicetree/bindings/clock/google,gs101-clock.yaml b/Documentation/devicetree/bindings/clock/google,gs101-clock.yaml
> new file mode 100644
> index 000000000000..f74494594b3b
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/clock/google,gs101-clock.yaml
> @@ -0,0 +1,125 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/clock/google,gs101-clock.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Google GS101 SoC clock controller
> +
> +maintainers:
> +  - Peter Griffin <peter.griffin@linaro.org>
> +
> +description: |
> +  Google GS101 clock controller is comprised of several CMU units, generating
> +  clocks for different domains. Those CMU units are modeled as separate device
> +  tree nodes, and might depend on each other. The root clock in that clock tree
> +  is OSCCLK (24.576 MHz). That external clock must be defined as a fixed-rate
> +  clock in dts.
> +
> +  CMU_TOP is a top-level CMU, where all base clocks are prepared using PLLs and
> +  dividers; all other leaf clocks (other CMUs) are usually derived from CMU_TOP.
> +
> +  Each clock is assigned an identifier and client nodes can use this identifier
> +  to specify the clock which they consume. All clocks available for usage
> +  in clock consumer nodes are defined as preprocessor macros in
> +  'dt-bindings/clock/gs101.h' header.
> +
> +properties:
> +  compatible:
> +    enum:
> +      - google,gs101-cmu-top
> +      - google,gs101-cmu-apm
> +      - google,gs101-cmu-misc
> +
> +  clocks:
> +    minItems: 1
> +    maxItems: 2
> +
> +  clock-names:
> +    minItems: 1
> +    maxItems: 2
> +
> +  "#clock-cells":
> +    const: 1
> +
> +  reg:
> +    maxItems: 1
> +
> +allOf:

No improvements here from v1.

> +  - if:
> +      properties:
> +        compatible:
> +          contains:
> +            const: google,gs101-cmu-top
> +
> +    then:
> +      properties:
> +        clocks:
> +          items:
> +            - description: External reference clock (24.576 MHz)
> +
> +        clock-names:
> +          items:
> +            - const: oscclk
> +
> +  - if:
> +      properties:
> +        compatible:
> +          contains:

enum:
  - google,gs101-cmu-apm
  - google,gs101-cmu-misc


Best regards,
Krzysztof
Peter Griffin Oct. 12, 2023, 8:56 a.m. UTC | #5
Hi Krzysztof,

On Thu, 12 Oct 2023 at 07:07, Krzysztof Kozlowski
<krzysztof.kozlowski@linaro.org> wrote:
>
> On 11/10/2023 23:48, William McVicker wrote:
> > On 10/11/2023, Peter Griffin wrote:
> >> Provide dt-schema documentation for Google gs101 SoC clock controller.
> >> Currently this adds support for cmu_top, cmu_misc and cmu_apm.
> >>
> >> Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
> >
> > Tested-by: Will McVicker <willmcvicker@google.com>
>
> And how do you perform testing of a binding?

I guess if William is using my script to build and flash the kernel it actually
runs the DTC checks as part of the build process.

See https://git.codelinaro.org/linaro/googlelt/pixelscripts/-/blob/clo/main/buildp21upstream.sh#L44

regards,

Peter.
Krzysztof Kozlowski Oct. 12, 2023, 9:36 a.m. UTC | #6
On 12/10/2023 10:56, Peter Griffin wrote:
> Hi Krzysztof,
> 
> On Thu, 12 Oct 2023 at 07:07, Krzysztof Kozlowski
> <krzysztof.kozlowski@linaro.org> wrote:
>>
>> On 11/10/2023 23:48, William McVicker wrote:
>>> On 10/11/2023, Peter Griffin wrote:
>>>> Provide dt-schema documentation for Google gs101 SoC clock controller.
>>>> Currently this adds support for cmu_top, cmu_misc and cmu_apm.
>>>>
>>>> Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
>>>
>>> Tested-by: Will McVicker <willmcvicker@google.com>
>>
>> And how do you perform testing of a binding?
> 
> I guess if William is using my script to build and flash the kernel it actually
> runs the DTC checks as part of the build process.
> 
> See https://git.codelinaro.org/linaro/googlelt/pixelscripts/-/blob/clo/main/buildp21upstream.sh#L44

So it is a build test? We do not consider building as a test procedure,
otherwise I should add my and robots tested-by to many other patches.
Shall I consider other Tested-by tags here also as build-tested only?

Best regards,
Krzysztof
Peter Griffin Oct. 12, 2023, 10:15 a.m. UTC | #7
Hi Krzysztof,

Thanks for your review.

On Thu, 12 Oct 2023 at 07:11, Krzysztof Kozlowski
<krzysztof.kozlowski@linaro.org> wrote:
>
> On 11/10/2023 20:48, Peter Griffin wrote:
> > Provide dt-schema documentation for Google gs101 SoC clock controller.
> > Currently this adds support for cmu_top, cmu_misc and cmu_apm.
> >
> > Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
> > ---
> >  .../bindings/clock/google,gs101-clock.yaml    | 125 ++++++++++
> >  include/dt-bindings/clock/google,gs101.h      | 232 ++++++++++++++++++
> >  2 files changed, 357 insertions(+)
> >  create mode 100644 Documentation/devicetree/bindings/clock/google,gs101-clock.yaml
> >  create mode 100644 include/dt-bindings/clock/google,gs101.h
> >
> > diff --git a/Documentation/devicetree/bindings/clock/google,gs101-clock.yaml b/Documentation/devicetree/bindings/clock/google,gs101-clock.yaml
> > new file mode 100644
> > index 000000000000..f74494594b3b
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/clock/google,gs101-clock.yaml
> > @@ -0,0 +1,125 @@
> > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> > +%YAML 1.2
> > +---
> > +$id: http://devicetree.org/schemas/clock/google,gs101-clock.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: Google GS101 SoC clock controller
> > +
> > +maintainers:
> > +  - Peter Griffin <peter.griffin@linaro.org>
> > +
> > +description: |
> > +  Google GS101 clock controller is comprised of several CMU units, generating
> > +  clocks for different domains. Those CMU units are modeled as separate device
> > +  tree nodes, and might depend on each other. The root clock in that clock tree
> > +  is OSCCLK (24.576 MHz). That external clock must be defined as a fixed-rate
> > +  clock in dts.
> > +
> > +  CMU_TOP is a top-level CMU, where all base clocks are prepared using PLLs and
> > +  dividers; all other leaf clocks (other CMUs) are usually derived from CMU_TOP.
> > +
> > +  Each clock is assigned an identifier and client nodes can use this identifier
> > +  to specify the clock which they consume. All clocks available for usage
> > +  in clock consumer nodes are defined as preprocessor macros in
> > +  'dt-bindings/clock/gs101.h' header.
> > +
> > +properties:
> > +  compatible:
> > +    enum:
> > +      - google,gs101-cmu-top
> > +      - google,gs101-cmu-apm
> > +      - google,gs101-cmu-misc
> > +
> > +  clocks:
> > +    minItems: 1
> > +    maxItems: 2
> > +
> > +  clock-names:
> > +    minItems: 1
> > +    maxItems: 2
> > +
> > +  "#clock-cells":
> > +    const: 1
> > +
> > +  reg:
> > +    maxItems: 1
> > +
> > +allOf:
>
> No improvements here from v1.

Seems I missed the
"required:" go before "allOf:" comment here. Sorry about that I've fixed that
in v4.

Seems like a few other exynos clock yaml bindings need that fix to.

>
> > +  - if:
> > +      properties:
> > +        compatible:
> > +          contains:
> > +            const: google,gs101-cmu-top
> > +
> > +    then:
> > +      properties:
> > +        clocks:
> > +          items:
> > +            - description: External reference clock (24.576 MHz)
> > +
> > +        clock-names:
> > +          items:
> > +            - const: oscclk
> > +
> > +  - if:
> > +      properties:
> > +        compatible:
> > +          contains:
>
> enum:
>   - google,gs101-cmu-apm
>   - google,gs101-cmu-misc

Ok just to be clear, are you saying I should have it like this?

  - if:
      properties:
        compatible:
          contains:
            enum:
              - google,gs101-cmu-misc
              - google,gs101-cmu-apm

    then:
      properties:
        clocks:
          minItems: 1
          items:
            - description: External reference clock (24.576 MHz)
            - description: Misc bus clock (from CMU_TOP)

        clock-names:
          minItems: 1
          items:
            - const: oscclk
            - const: dout_cmu_misc_bus

Instead of a dedicated  'if: const <compatible> then: ' for each CMU?

If I'm wrong above would you been kind enough to elaborate a bit
more on what you want, as all this dt-schema yaml stuff is a bit new
for me

Many thanks,

Peter
Krzysztof Kozlowski Oct. 12, 2023, 10:20 a.m. UTC | #8
On 12/10/2023 12:15, Peter Griffin wrote:

>>> +  - if:
>>> +      properties:
>>> +        compatible:
>>> +          contains:
>>> +            const: google,gs101-cmu-top
>>> +
>>> +    then:
>>> +      properties:
>>> +        clocks:
>>> +          items:
>>> +            - description: External reference clock (24.576 MHz)
>>> +
>>> +        clock-names:
>>> +          items:
>>> +            - const: oscclk
>>> +
>>> +  - if:
>>> +      properties:
>>> +        compatible:
>>> +          contains:
>>
>> enum:
>>   - google,gs101-cmu-apm
>>   - google,gs101-cmu-misc
> 
> Ok just to be clear, are you saying I should have it like this?
> 
>   - if:
>       properties:
>         compatible:
>           contains:
>             enum:
>               - google,gs101-cmu-misc

No, my bad, I meant apm + google,gs101-cmu-top

>               - google,gs101-cmu-apm




Best regards,
Krzysztof
Peter Griffin Oct. 12, 2023, 10:39 a.m. UTC | #9
Hi Krzysztof

On Thu, 12 Oct 2023 at 11:20, Krzysztof Kozlowski
<krzysztof.kozlowski@linaro.org> wrote:
>
> On 12/10/2023 12:15, Peter Griffin wrote:
>
> >>> +  - if:
> >>> +      properties:
> >>> +        compatible:
> >>> +          contains:
> >>> +            const: google,gs101-cmu-top
> >>> +
> >>> +    then:
> >>> +      properties:
> >>> +        clocks:
> >>> +          items:
> >>> +            - description: External reference clock (24.576 MHz)
> >>> +
> >>> +        clock-names:
> >>> +          items:
> >>> +            - const: oscclk
> >>> +
> >>> +  - if:
> >>> +      properties:
> >>> +        compatible:
> >>> +          contains:
> >>
> >> enum:
> >>   - google,gs101-cmu-apm
> >>   - google,gs101-cmu-misc
> >
> > Ok just to be clear, are you saying I should have it like this?
> >
> >   - if:
> >       properties:
> >         compatible:
> >           contains:
> >             enum:
> >               - google,gs101-cmu-misc
>
> No, my bad, I meant apm + google,gs101-cmu-top
>
> >               - google,gs101-cmu-apm

Ah OK, yes that makes more sense. Thanks for the clarification :)

Peter.
Peter Griffin Oct. 12, 2023, 10:45 a.m. UTC | #10
Hi Krzysztof,

On Thu, 12 Oct 2023 at 10:36, Krzysztof Kozlowski
<krzysztof.kozlowski@linaro.org> wrote:
>
> On 12/10/2023 10:56, Peter Griffin wrote:
> > Hi Krzysztof,
> >
> > On Thu, 12 Oct 2023 at 07:07, Krzysztof Kozlowski
> > <krzysztof.kozlowski@linaro.org> wrote:
> >>
> >> On 11/10/2023 23:48, William McVicker wrote:
> >>> On 10/11/2023, Peter Griffin wrote:
> >>>> Provide dt-schema documentation for Google gs101 SoC clock controller.
> >>>> Currently this adds support for cmu_top, cmu_misc and cmu_apm.
> >>>>
> >>>> Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
> >>>
> >>> Tested-by: Will McVicker <willmcvicker@google.com>
> >>
> >> And how do you perform testing of a binding?
> >
> > I guess if William is using my script to build and flash the kernel it actually
> > runs the DTC checks as part of the build process.
> >
> > See https://git.codelinaro.org/linaro/googlelt/pixelscripts/-/blob/clo/main/buildp21upstream.sh#L44
>
> So it is a build test? We do not consider building as a test procedure,
> otherwise I should add my and robots tested-by to many other patches.

Ok so I should only add the Tested-by on the .c patches?

> Shall I consider other Tested-by tags here also as build-tested only?

No. William indicated here
https://lore.kernel.org/linux-arm-kernel/ZScZu-QB2LmB4CSM@google.com/T/#mbd96a26b725d6c85eb4193de8cd70ff277bc728e
that he booted it on his Oriole device.

Peter.
Krzysztof Kozlowski Oct. 12, 2023, 11:33 a.m. UTC | #11
On 12/10/2023 12:45, Peter Griffin wrote:
> Hi Krzysztof,
> 
> On Thu, 12 Oct 2023 at 10:36, Krzysztof Kozlowski
> <krzysztof.kozlowski@linaro.org> wrote:
>>
>> On 12/10/2023 10:56, Peter Griffin wrote:
>>> Hi Krzysztof,
>>>
>>> On Thu, 12 Oct 2023 at 07:07, Krzysztof Kozlowski
>>> <krzysztof.kozlowski@linaro.org> wrote:
>>>>
>>>> On 11/10/2023 23:48, William McVicker wrote:
>>>>> On 10/11/2023, Peter Griffin wrote:
>>>>>> Provide dt-schema documentation for Google gs101 SoC clock controller.
>>>>>> Currently this adds support for cmu_top, cmu_misc and cmu_apm.
>>>>>>
>>>>>> Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
>>>>>
>>>>> Tested-by: Will McVicker <willmcvicker@google.com>
>>>>
>>>> And how do you perform testing of a binding?
>>>
>>> I guess if William is using my script to build and flash the kernel it actually
>>> runs the DTC checks as part of the build process.
>>>
>>> See https://git.codelinaro.org/linaro/googlelt/pixelscripts/-/blob/clo/main/buildp21upstream.sh#L44
>>
>> So it is a build test? We do not consider building as a test procedure,
>> otherwise I should add my and robots tested-by to many other patches.
> 
> Ok so I should only add the Tested-by on the .c patches?

In my opinion, if someone performs only build testing, it is not a
testing. You cannot test the bindings other way than build testing, at
least I do not know such way. Of course other code like C or DTS affects
hardware so it can be tested.

> 
>> Shall I consider other Tested-by tags here also as build-tested only?
> 
> No. William indicated here
> https://lore.kernel.org/linux-arm-kernel/ZScZu-QB2LmB4CSM@google.com/T/#mbd96a26b725d6c85eb4193de8cd70ff277bc728e
> that he booted it on his Oriole device.


OK, I was just a bit confused.

Best regards,
Krzysztof
William McVicker Oct. 12, 2023, 4:41 p.m. UTC | #12
Hi Krzysztof,

On 10/12/2023, Krzysztof Kozlowski wrote:
> On 12/10/2023 12:45, Peter Griffin wrote:
> > Hi Krzysztof,
> > 
> > On Thu, 12 Oct 2023 at 10:36, Krzysztof Kozlowski
> > <krzysztof.kozlowski@linaro.org> wrote:
> >>
> >> On 12/10/2023 10:56, Peter Griffin wrote:
> >>> Hi Krzysztof,
> >>>
> >>> On Thu, 12 Oct 2023 at 07:07, Krzysztof Kozlowski
> >>> <krzysztof.kozlowski@linaro.org> wrote:
> >>>>
> >>>> On 11/10/2023 23:48, William McVicker wrote:
> >>>>> On 10/11/2023, Peter Griffin wrote:
> >>>>>> Provide dt-schema documentation for Google gs101 SoC clock controller.
> >>>>>> Currently this adds support for cmu_top, cmu_misc and cmu_apm.
> >>>>>>
> >>>>>> Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
> >>>>>
> >>>>> Tested-by: Will McVicker <willmcvicker@google.com>
> >>>>
> >>>> And how do you perform testing of a binding?
> >>>
> >>> I guess if William is using my script to build and flash the kernel it actually
> >>> runs the DTC checks as part of the build process.
> >>>
> >>> See https://git.codelinaro.org/linaro/googlelt/pixelscripts/-/blob/clo/main/buildp21upstream.sh#L44
> >>
> >> So it is a build test? We do not consider building as a test procedure,
> >> otherwise I should add my and robots tested-by to many other patches.
> > 
> > Ok so I should only add the Tested-by on the .c patches?
> 
> In my opinion, if someone performs only build testing, it is not a
> testing. You cannot test the bindings other way than build testing, at
> least I do not know such way. Of course other code like C or DTS affects
> hardware so it can be tested.

What additional testing beside building and booting do you prefer at this
stage? I put my Tested-by for this patch because it includes the google,gs101.h
header which is used by the DT and clock controller driver during boot. Maybe
I should have been more clear on what I tested in each patch instead of only
mentioning how I tested in the cover letter?

Sorry for the confusion.

Thanks,
Will

> 
> > 
> >> Shall I consider other Tested-by tags here also as build-tested only?
> > 
> > No. William indicated here
> > https://lore.kernel.org/linux-arm-kernel/ZScZu-QB2LmB4CSM@google.com/T/#mbd96a26b725d6c85eb4193de8cd70ff277bc728e
> > that he booted it on his Oriole device.
> 
> 
> OK, I was just a bit confused.
> 
> Best regards,
> Krzysztof
>
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/clock/google,gs101-clock.yaml b/Documentation/devicetree/bindings/clock/google,gs101-clock.yaml
new file mode 100644
index 000000000000..f74494594b3b
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/google,gs101-clock.yaml
@@ -0,0 +1,125 @@ 
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/google,gs101-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Google GS101 SoC clock controller
+
+maintainers:
+  - Peter Griffin <peter.griffin@linaro.org>
+
+description: |
+  Google GS101 clock controller is comprised of several CMU units, generating
+  clocks for different domains. Those CMU units are modeled as separate device
+  tree nodes, and might depend on each other. The root clock in that clock tree
+  is OSCCLK (24.576 MHz). That external clock must be defined as a fixed-rate
+  clock in dts.
+
+  CMU_TOP is a top-level CMU, where all base clocks are prepared using PLLs and
+  dividers; all other leaf clocks (other CMUs) are usually derived from CMU_TOP.
+
+  Each clock is assigned an identifier and client nodes can use this identifier
+  to specify the clock which they consume. All clocks available for usage
+  in clock consumer nodes are defined as preprocessor macros in
+  'dt-bindings/clock/gs101.h' header.
+
+properties:
+  compatible:
+    enum:
+      - google,gs101-cmu-top
+      - google,gs101-cmu-apm
+      - google,gs101-cmu-misc
+
+  clocks:
+    minItems: 1
+    maxItems: 2
+
+  clock-names:
+    minItems: 1
+    maxItems: 2
+
+  "#clock-cells":
+    const: 1
+
+  reg:
+    maxItems: 1
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: google,gs101-cmu-top
+
+    then:
+      properties:
+        clocks:
+          items:
+            - description: External reference clock (24.576 MHz)
+
+        clock-names:
+          items:
+            - const: oscclk
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: google,gs101-cmu-misc
+
+    then:
+      properties:
+        clocks:
+          items:
+            - description: External reference clock (24.576 MHz)
+            - description: Misc bus clock (from CMU_TOP)
+
+        clock-names:
+          items:
+            - const: oscclk
+            - const: dout_cmu_misc_bus
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: google,gs101-cmu-apm
+
+    then:
+      properties:
+        clocks:
+          items:
+            - description: External reference clock (24.576 MHz)
+
+        clock-names:
+          items:
+            - const: oscclk
+
+required:
+  - compatible
+  - "#clock-cells"
+  - clocks
+  - clock-names
+  - reg
+
+additionalProperties: false
+
+examples:
+  # Clock controller node for CMU_TOP
+  - |
+    #include <dt-bindings/clock/google,gs101.h>
+    soc {
+        #address-cells = <2>;
+        #size-cells = <1>;
+
+        cmu_top: clock-controller@1e080000 {
+            compatible = "google,gs101-cmu-top";
+            reg = <0x0 0x1e080000 0x8000>;
+            #clock-cells = <1>;
+            clocks = <&ext_24_5m>;
+            clock-names = "oscclk";
+        };
+    };
+
+...
diff --git a/include/dt-bindings/clock/google,gs101.h b/include/dt-bindings/clock/google,gs101.h
new file mode 100644
index 000000000000..7765ba68f734
--- /dev/null
+++ b/include/dt-bindings/clock/google,gs101.h
@@ -0,0 +1,232 @@ 
+/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */
+/*
+ * Copyright (C) 2023 Linaro Ltd.
+ * Author: Peter Griffin <peter.griffin@linaro.org>
+ *
+ * Device Tree binding constants for Google gs101 clock controller.
+ */
+
+#ifndef _DT_BINDINGS_CLOCK_GOOGLE_GS101_H
+#define _DT_BINDINGS_CLOCK_GOOGLE_GS101_H
+
+/* CMU_TOP PLL*/
+#define CLK_FOUT_SHARED0_PLL		1
+#define CLK_FOUT_SHARED1_PLL		2
+#define CLK_FOUT_SHARED2_PLL		3
+#define CLK_FOUT_SHARED3_PLL		4
+#define CLK_FOUT_SPARE_PLL		5
+
+/* CMU_TOP MUX*/
+#define CLK_MOUT_SHARED0_PLL		6
+#define CLK_MOUT_SHARED1_PLL		7
+#define CLK_MOUT_SHARED2_PLL		8
+#define CLK_MOUT_SHARED3_PLL		9
+#define CLK_MOUT_SPARE_PLL		10
+#define CLK_MOUT_BUS0_BUS		11
+#define CLK_MOUT_CMU_BOOST		12
+#define CLK_MOUT_BUS1_BUS		13
+#define CLK_MOUT_BUS2_BUS		14
+#define CLK_MOUT_CORE_BUS		15
+#define CLK_MOUT_EH_BUS			16
+#define CLK_MOUT_CPUCL2_SWITCH		17
+#define CLK_MOUT_CPUCL1_SWITCH		18
+#define CLK_MOUT_CPUCL0_SWITCH		19
+#define CLK_MOUT_CPUCL0_DBG		20
+#define CLK_MOUT_CMU_HPM		21
+#define CLK_MOUT_G3D_SWITCH		22
+#define CLK_MOUT_G3D_GLB		23
+#define CLK_MOUT_DPU_BUS		24
+#define CLK_MOUT_DISP_BUS		25
+#define CLK_MOUT_G2D_G2D		26
+#define CLK_MOUT_G2D_MSCL		27
+#define CLK_MOUT_HSI0_USB31DRD		28
+#define CLK_MOUT_HSI0_BUS		29
+#define CLK_MOUT_HSI0_DPGTC		30
+#define CLK_MOUT_HSI0_USBDPDGB		31
+#define CLK_MOUT_HSI1_BUS		32
+#define CLK_MOUT_HSI1_PCIE		33
+#define CLK_MOUT_HSI2_BUS		34
+#define CLK_MOUT_HSI2_PCIE		35
+#define CLK_MOUT_HSI2_UFS_EMBD		36
+#define CLK_MOUT_HSI2_MMC_CARD		37
+#define CLK_MOUT_CSIS			38
+#define CLK_MOUT_PDP_BUS		39
+#define CLK_MOUT_PDP_VRA		40
+#define CLK_MOUT_IPP_BUS		41
+#define CLK_MOUT_G3AA			42
+#define CLK_MOUT_ITP			43
+#define CLK_MOUT_DNS_BUS		44
+#define CLK_MOUT_TNR_BUS		45
+#define CLK_MOUT_MCSC_ITSC		46
+#define CLK_MOUT_MCSC_MCSC		47
+#define CLK_MOUT_GDC_SCSC		48
+#define CLK_MOUT_GDC_GDC0		49
+#define CLK_MOUT_GDC_GDC1		50
+#define CLK_MOUT_MFC_MFC		51
+#define CLK_MOUT_MIF_SWITCH		52
+#define CLK_MOUT_MIF_BUS		53
+#define CLK_MOUT_MISC_BUS		54
+#define CLK_MOUT_MISC_SSS		55
+#define CLK_MOUT_PERIC0_IP		56
+#define CLK_MOUT_PERIC0_BUS		57
+#define CLK_MOUT_PERIC1_IP		58
+#define CLK_MOUT_PERIC1_BUS		59
+#define CLK_MOUT_TPU_TPU		60
+#define CLK_MOUT_TPU_TPUCTL		61
+#define CLK_MOUT_TPU_BUS		62
+#define CLK_MOUT_TPU_UART		63
+#define CLK_MOUT_TPU_HPM		64
+#define CLK_MOUT_BO_BUS			65
+#define CLK_MOUT_G3D_BUSD		66
+
+/* CMU_TOP Dividers*/
+#define CLK_DOUT_SHARED0_DIV3		67
+#define CLK_DOUT_SHARED0_DIV2		68
+#define CLK_DOUT_SHARED0_DIV4		69
+#define CLK_DOUT_SHARED0_DIV5		70
+#define CLK_DOUT_SHARED1_DIV3		71
+#define CLK_DOUT_SHARED1_DIV2		72
+#define CLK_DOUT_SHARED1_DIV4		73
+#define CLK_DOUT_SHARED2_DIV2		74
+#define CLK_DOUT_SHARED3_DIV2		75
+#define CLK_DOUT_BUS0_BUS		76
+#define CLK_DOUT_CMU_BOOST		77
+#define CLK_DOUT_BUS1_BUS		78
+#define CLK_DOUT_BUS2_BUS		79
+#define CLK_DOUT_CORE_BUS		80
+#define CLK_DOUT_EH_BUS			81
+#define CLK_DOUT_CPUCL2_SWITCH		82
+#define CLK_DOUT_CPUCL1_SWITCH		83
+#define CLK_DOUT_CPUCL0_SWITCH		84
+#define CLK_DOUT_CPUCL0_DBG		85
+#define CLK_DOUT_CMU_HPM		86
+#define CLK_DOUT_G3D_SWITCH		87
+#define CLK_DOUT_G3D_GLB		88
+#define CLK_DOUT_DPU_BUS		89
+#define CLK_DOUT_DISP_BUS		90
+#define CLK_DOUT_G2D_G2D		91
+#define CLK_DOUT_G2D_MSCL		92
+#define CLK_DOUT_HSI0_USB31DRD		93
+#define CLK_DOUT_HSI0_BUS		94
+#define CLK_DOUT_HSI0_DPGTC		95
+#define CLK_DOUT_HSI0_USBDPDGB		96
+#define CLK_DOUT_HSI1_BUS		97
+#define CLK_DOUT_HSI1_PCIE		98
+#define CLK_DOUT_HSI2_BUS		100
+#define CLK_DOUT_HSI2_PCIE		101
+#define CLK_DOUT_HSI2_UFS_EMBD		102
+#define CLK_DOUT_HSI2_MMC_CARD		103
+#define CLK_DOUT_CSIS			104
+#define CLK_DOUT_PDP_BUS		105
+#define CLK_DOUT_PDP_VRA		106
+#define CLK_DOUT_IPP_BUS		107
+#define CLK_DOUT_G3AA			108
+#define CLK_DOUT_ITP			109
+#define CLK_DOUT_DNS_BUS		110
+#define CLK_DOUT_TNR_BUS		111
+#define CLK_DOUT_MCSC_ITSC		112
+#define CLK_DOUT_MCSC_MCSC		113
+#define CLK_DOUT_GDC_SCSC		114
+#define CLK_DOUT_GDC_GDC0		115
+#define CLK_DOUT_GDC_GDC1		116
+#define CLK_DOUT_MFC_MFC		117
+#define CLK_DOUT_MIF_BUS		118
+#define CLK_DOUT_MISC_BUS		119
+#define CLK_DOUT_MISC_SSS		120
+#define CLK_DOUT_PERIC0_BUS		121
+#define CLK_DOUT_PERIC0_IP		122
+#define CLK_DOUT_PERIC1_BUS		123
+#define CLK_DOUT_PERIC1_IP		124
+#define CLK_DOUT_TPU_TPU		125
+#define CLK_DOUT_TPU_TPUCTL		126
+#define CLK_DOUT_TPU_BUS		127
+#define CLK_DOUT_TPU_UART		128
+#define CLK_DOUT_TPU_HPM		129
+#define CLK_DOUT_BO_BUS			130
+
+/* CMU_TOP Gates*/
+#define CLK_GOUT_BUS0_BUS		131
+#define CLK_GOUT_BUS1_BUS		132
+#define CLK_GOUT_BUS2_BUS		133
+#define CLK_GOUT_CORE_BUS		134
+#define CLK_GOUT_EH_BUS			135
+#define CLK_GOUT_CPUCL2_SWITCH		136
+#define CLK_GOUT_CPUCL1_SWITCH		137
+#define CLK_GOUT_CPUCL0_SWITCH		138
+#define CLK_GOUT_CPUCL0_DBG		139
+#define CLK_GOUT_CMU_HPM		140
+#define CLK_GOUT_G3D_SWITCH		141
+#define CLK_GOUT_G3D_GLB		142
+#define CLK_GOUT_DPU_BUS		143
+#define CLK_GOUT_DISP_BUS		144
+#define CLK_GOUT_G2D_G2D		145
+#define CLK_GOUT_G2D_MSCL		146
+#define CLK_GOUT_HSI0_USB31DRD		147
+#define CLK_GOUT_HSI0_BUS		148
+#define CLK_GOUT_HSI0_DPGTC		149
+#define CLK_GOUT_HSI0_USBDPDGB		150
+#define CLK_GOUT_HSI1_BUS		151
+#define CLK_GOUT_HSI1_PCIE		152
+#define CLK_GOUT_HSI2_BUS		153
+#define CLK_GOUT_HSI2_PCIE		154
+#define CLK_GOUT_HSI2_UFS_EMBD		155
+#define CLK_GOUT_HSI2_MMC_CARD		156
+#define CLK_GOUT_CSIS			157
+#define CLK_GOUT_PDP_BUS		158
+#define CLK_GOUT_PDP_VRA		159
+#define CLK_GOUT_IPP_BUS		160
+#define CLK_GOUT_G3AA			161
+#define CLK_GOUT_ITP			162
+#define CLK_GOUT_DNS_BUS		163
+#define CLK_GOUT_TNR_BUS		164
+#define CLK_GOUT_MCSC_ITSC		165
+#define CLK_GOUT_MCSC_MCSC		166
+#define CLK_GOUT_GDC_SCSC		167
+#define CLK_GOUT_GDC_GDC0		168
+#define CLK_GOUT_GDC_GDC1		169
+#define CLK_GOUT_MFC_MFC		170
+#define CLK_GOUT_MIF_SWITCH		171
+#define CLK_GOUT_MIF_BUS		172
+#define CLK_GOUT_MISC_BUS		173
+#define CLK_GOUT_MISC_SSS		174
+#define CLK_GOUT_PERIC0_BUS		175
+#define CLK_GOUT_PERIC0_IP		176
+#define CLK_GOUT_PERIC1_BUS		177
+#define CLK_GOUT_PERIC1_IP		178
+#define CLK_GOUT_TPU_TPU		179
+#define CLK_GOUT_TPU_TPUCTL		180
+#define CLK_GOUT_TPU_BUS		181
+#define CLK_GOUT_TPU_UART		182
+#define CLK_GOUT_TPU_HPM		183
+#define CLK_GOUT_BO_BUS			184
+#define CLK_GOUT_CMU_BOOST		185
+
+/* CMU_APM */
+
+#define CLK_MOUT_APM_FUNC					1
+#define CLK_MOUT_APM_FUNCSRC					2
+#define CLK_DOUT_APM_BOOST					3
+#define CLK_DOUT_APM_USI0_UART					4
+#define CLK_DOUT_APM_USI0_USI					5
+#define CLK_DOUT_APM_USI1_UART					6
+#define CLK_GOUT_APM_FUNC					7
+#define CLK_GOUT_APM_UID_APBIF_GPIO_ALIVE_IPCLKPORT_PCLK	8
+#define CLK_GOUT_APM_UID_APBIF_GPIO_FAR_ALIVE_IPCLKPORT_PCLK	9
+#define CLK_GOUT_APM_UID_APBIF_PMU_ALIVE_IPCLKPORT_PCLK		10
+#define CLK_GOUT_APM_UID_SYSREG_APM_IPCLKPORT_PCLK		11
+#define CLK_APM_PLL_DIV2_APM					12
+#define CLK_APM_PLL_DIV4_APM					13
+#define CLK_APM_PLL_DIV16_APM					14
+
+/* CMU_MISC */
+
+#define CLK_MOUT_MISC_BUS_USER					1
+#define CLK_MOUT_MISC_SSS_USER					2
+#define CLK_DOUT_MISC_BUSP					3
+#define CLK_DOUT_MISC_GIC					4
+#define CLK_GOUT_MISC_PCLK					5
+#define CLK_GOUT_MISC_SYSREG_PCLK				6
+#define CLK_GOUT_MISC_WDT_CLUSTER0				7
+#define CLK_GOUT_MISC_WDT_CLUSTER1				8
+
+#endif /* _DT_BINDINGS_CLOCK_GOOGLE_GS101_H */