| Message ID | 1408551962-2249-1-git-send-email-sthokal@xilinx.com (mailing list archive) |
|---|---|
| State | New, archived |
| Delegated to: | Bjorn Helgaas |
| Headers | show |
Hi Bjorn, I fixed the mentioned issues with build-bot in v7. Could you please take this patch? Thanks Srikanth On Wed, Aug 20, 2014 at 9:56 PM, Srikanth Thokala <sthokal@xilinx.com> wrote: > This is the driver for Xilinx AXI PCIe Host Bridge Soft IP > > Signed-off-by: Srikanth Thokala <sthokal@xilinx.com> > Acked-by: Arnd Bergmann <arnd@arndb.de> > --- > Changes in v7: > - Removed errors reported from build-bot. The errors are > mainly due to same CONFIG_PCI_XILINX flag being used for > Zynq and Microblaze platforms. So, renamed the driver > config flag name to CONFIG_PCIE_XILINX. > - Also, renamed the driver file to pcie-xilinx.c to be in > sync with CONFIG option. > - Fixed the annotation of xilinx_pcie_scan_bus() function > to remove build-bot warnings. > > Changes in v6: > - Added Ack from Arnd. Thanks Arnd. > - Rebased on 3.16-rc7. > > Changes in v5: > - Removed unnecessary checking of port structure. > - Changed the return type of verify_config from int to bool. > - Renamed following functions, > xilinx_pcie_is_link_up() -> xilinx_pcie_link_is_up() > xilinx_pcie_verify_config() -> xilinx_pcie_valid_device() > xilinx_pcie_get_config_base() -> xilinx_pcie_config_base() > - Removed link_up bool flag from port structure, as it is not > being used. > - Removed unused constants. > - Rebased on 3.16-rc6. > - Fixed some minor comments. > - Thanks Bjorn for the review. > > Changes in v4: > - Regarding the comments to separate ECAM functionality, > I have sent a separate patch and it is decided to implement > it later. The patch is here, > https://lkml.org/lkml/2014/5/18/54 > - Fixed issue with adding configuration bus resource. > - Moved the logic for setting up bus resources to probe() from > pcie_setup(). > - Instead of mapping all the MSI interrupts in the probe, changed > to map only when a MSI is requested. > - Earlier, the implementation of legacy and MSI interrupts init- > is mutually exclusive, now changed to have the legacy interrupts > init always and MSI interrupt init based on CONFIG_PCI_MSI flag. > - Regarding the MSI generic implementation comment, I will plan to > do on top of this driver patch. > - Rebased on 3.16-rc2. > - Fixed other minor comments. > - Thanks Arnd and Bjorn for the review. > > Changes in v3: > - Rebased on v3.15.0-rc1 > - Added support for interrupt-map DT functionality. > - Removed map_irq() wrapper, instead using of_irq_parse_and_map_pci(). > - Modified resource mapping logic as per the series > "PCI: ARM: add support for generic PCI host controller" > - Modified devicetree binding documentation to update with interrupt- > map properties. > - Use devm calls wherever applicable. > - Fixed minor comments from Jason > - Thanks Jason for the review and suggestions. > > Changes in v2: > - Rebased on v3.14.0-rc8 > - Removed IP specific DT properties like include-rc, axibar-num etc., > as suggested by Jason and Bjorn, Thanks > --- > .../devicetree/bindings/pci/xilinx-pcie.txt | 62 ++ > drivers/pci/host/Kconfig | 7 + > drivers/pci/host/Makefile | 1 + > drivers/pci/host/pcie-xilinx.c | 978 ++++++++++++++++++++ > 4 files changed, 1048 insertions(+) > create mode 100644 Documentation/devicetree/bindings/pci/xilinx-pcie.txt > create mode 100644 drivers/pci/host/pcie-xilinx.c > > diff --git a/Documentation/devicetree/bindings/pci/xilinx-pcie.txt b/Documentation/devicetree/bindings/pci/xilinx-pcie.txt > new file mode 100644 > index 0000000..3e2c88d > --- /dev/null > +++ b/Documentation/devicetree/bindings/pci/xilinx-pcie.txt > @@ -0,0 +1,62 @@ > +* Xilinx AXI PCIe Root Port Bridge DT description > + > +Required properties: > +- #address-cells: Address representation for root ports, set to <3> > +- #size-cells: Size representation for root ports, set to <2> > +- #interrupt-cells: specifies the number of cells needed to encode an > + interrupt source. The value must be 1. > +- compatible: Should contain "xlnx,axi-pcie-host-1.00.a" > +- reg: Should contain AXI PCIe registers location and length > +- device_type: must be "pci" > +- interrupts: Should contain AXI PCIe interrupt > +- interrupt-map-mask, > + interrupt-map: standard PCI properties to define the mapping of the > + PCI interface to interrupt numbers. > +- ranges: ranges for the PCI memory regions (I/O space region is not > + supported by hardware) > + Please refer to the standard PCI bus binding document for a more > + detailed explanation > + > +Optional properties: > +- bus-range: PCI bus numbers covered > + > +Interrupt controller child node > ++++++++++++++++++++++++++++++++ > +Required properties: > +- interrupt-controller: identifies the node as an interrupt controller > +- #address-cells: specifies the number of cells needed to encode an > + address. The value must be 0. > +- #interrupt-cells: specifies the number of cells needed to encode an > + interrupt source. The value must be 1. > + > +NOTE: > +The core provides a single interrupt for both INTx/MSI messages. So, > +created a interrupt controller node to support 'interrupt-map' DT > +functionality. The driver will create an IRQ domain for this map, decode > +the four INTx interrupts in ISR and route them to this domain. > + > + > +Example: > +++++++++ > + > + pci_express: axi-pcie@50000000 { > + #address-cells = <3>; > + #size-cells = <2>; > + #interrupt-cells = <1>; > + compatible = "xlnx,axi-pcie-host-1.00.a"; > + reg = < 0x50000000 0x10000000 >; > + device_type = "pci"; > + interrupts = < 0 52 4 >; > + interrupt-map-mask = <0 0 0 7>; > + interrupt-map = <0 0 0 1 &pcie_intc 1>, > + <0 0 0 2 &pcie_intc 2>, > + <0 0 0 3 &pcie_intc 3>, > + <0 0 0 4 &pcie_intc 4>; > + ranges = < 0x02000000 0 0x60000000 0x60000000 0 0x10000000 >; > + > + pcie_intc: interrupt-controller { > + interrupt-controller; > + #address-cells = <0>; > + #interrupt-cells = <1>; > + } > + }; > diff --git a/drivers/pci/host/Kconfig b/drivers/pci/host/Kconfig > index 21df477..255a9fa 100644 > --- a/drivers/pci/host/Kconfig > +++ b/drivers/pci/host/Kconfig > @@ -46,4 +46,11 @@ config PCI_HOST_GENERIC > Say Y here if you want to support a simple generic PCI host > controller, such as the one emulated by kvmtool. > > +config PCIE_XILINX > + bool "Xilinx AXI PCIe host bridge support" > + depends on ARCH_ZYNQ > + help > + Say 'Y' here if you want kernel to support the Xilinx AXI PCIe > + Host Bridge driver. > + > endmenu > diff --git a/drivers/pci/host/Makefile b/drivers/pci/host/Makefile > index 611ba4b..339595c 100644 > --- a/drivers/pci/host/Makefile > +++ b/drivers/pci/host/Makefile > @@ -6,3 +6,4 @@ obj-$(CONFIG_PCI_TEGRA) += pci-tegra.o > obj-$(CONFIG_PCI_RCAR_GEN2) += pci-rcar-gen2.o > obj-$(CONFIG_PCI_RCAR_GEN2_PCIE) += pcie-rcar.o > obj-$(CONFIG_PCI_HOST_GENERIC) += pci-host-generic.o > +obj-$(CONFIG_PCIE_XILINX) += pcie-xilinx.o > diff --git a/drivers/pci/host/pcie-xilinx.c b/drivers/pci/host/pcie-xilinx.c > new file mode 100644 > index 0000000..32c5ded > --- /dev/null > +++ b/drivers/pci/host/pcie-xilinx.c > @@ -0,0 +1,978 @@ > +/* > + * PCIe host controller driver for Xilinx AXI PCIe Bridge > + * > + * Copyright (c) 2012 - 2014 Xilinx, Inc. > + * > + * Based on the Tegra PCIe driver > + * > + * Bits taken from Synopsys Designware Host controller driver and > + * ARM PCI Host generic driver. > + * > + * This program is free software: you can redistribute it and/or modify > + * it under the terms of the GNU General Public License as published by > + * the Free Software Foundation, either version 2 of the License, or > + * (at your option) any later version. > + */ > + > +#include <linux/interrupt.h> > +#include <linux/irq.h> > +#include <linux/irqdomain.h> > +#include <linux/kernel.h> > +#include <linux/module.h> > +#include <linux/msi.h> > +#include <linux/of_address.h> > +#include <linux/of_pci.h> > +#include <linux/of_platform.h> > +#include <linux/of_irq.h> > +#include <linux/pci.h> > +#include <linux/platform_device.h> > + > +/* Register definitions */ > +#define XILINX_PCIE_REG_BIR 0x00000130 > +#define XILINX_PCIE_REG_IDR 0x00000138 > +#define XILINX_PCIE_REG_IMR 0x0000013c > +#define XILINX_PCIE_REG_PSCR 0x00000144 > +#define XILINX_PCIE_REG_RPSC 0x00000148 > +#define XILINX_PCIE_REG_MSIBASE1 0x0000014c > +#define XILINX_PCIE_REG_MSIBASE2 0x00000150 > +#define XILINX_PCIE_REG_RPEFR 0x00000154 > +#define XILINX_PCIE_REG_RPIFR1 0x00000158 > +#define XILINX_PCIE_REG_RPIFR2 0x0000015c > + > +/* Interrupt registers definitions */ > +#define XILINX_PCIE_INTR_LINK_DOWN BIT(0) > +#define XILINX_PCIE_INTR_ECRC_ERR BIT(1) > +#define XILINX_PCIE_INTR_STR_ERR BIT(2) > +#define XILINX_PCIE_INTR_HOT_RESET BIT(3) > +#define XILINX_PCIE_INTR_CFG_TIMEOUT BIT(8) > +#define XILINX_PCIE_INTR_CORRECTABLE BIT(9) > +#define XILINX_PCIE_INTR_NONFATAL BIT(10) > +#define XILINX_PCIE_INTR_FATAL BIT(11) > +#define XILINX_PCIE_INTR_INTX BIT(16) > +#define XILINX_PCIE_INTR_MSI BIT(17) > +#define XILINX_PCIE_INTR_SLV_UNSUPP BIT(20) > +#define XILINX_PCIE_INTR_SLV_UNEXP BIT(21) > +#define XILINX_PCIE_INTR_SLV_COMPL BIT(22) > +#define XILINX_PCIE_INTR_SLV_ERRP BIT(23) > +#define XILINX_PCIE_INTR_SLV_CMPABT BIT(24) > +#define XILINX_PCIE_INTR_SLV_ILLBUR BIT(25) > +#define XILINX_PCIE_INTR_MST_DECERR BIT(26) > +#define XILINX_PCIE_INTR_MST_SLVERR BIT(27) > +#define XILINX_PCIE_INTR_MST_ERRP BIT(28) > +#define XILINX_PCIE_IMR_ALL_MASK 0x1FF30FED > +#define XILINX_PCIE_IDR_ALL_MASK 0xFFFFFFFF > + > +/* Root Port Error FIFO Read Register definitions */ > +#define XILINX_PCIE_RPEFR_ERR_VALID BIT(18) > +#define XILINX_PCIE_RPEFR_REQ_ID GENMASK(15, 0) > +#define XILINX_PCIE_RPEFR_ALL_MASK 0xFFFFFFFF > + > +/* Root Port Interrupt FIFO Read Register 1 definitions */ > +#define XILINX_PCIE_RPIFR1_INTR_VALID BIT(31) > +#define XILINX_PCIE_RPIFR1_MSI_INTR BIT(30) > +#define XILINX_PCIE_RPIFR1_INTR_MASK GENMASK(28, 27) > +#define XILINX_PCIE_RPIFR1_ALL_MASK 0xFFFFFFFF > +#define XILINX_PCIE_RPIFR1_INTR_SHIFT 27 > + > +/* Bridge Info Register definitions */ > +#define XILINX_PCIE_BIR_ECAM_SZ_MASK GENMASK(18, 16) > +#define XILINX_PCIE_BIR_ECAM_SZ_SHIFT 16 > + > +/* Root Port Interrupt FIFO Read Register 2 definitions */ > +#define XILINX_PCIE_RPIFR2_MSG_DATA GENMASK(15, 0) > + > +/* Root Port Status/control Register definitions */ > +#define XILINX_PCIE_REG_RPSC_BEN BIT(0) > + > +/* Phy Status/Control Register definitions */ > +#define XILINX_PCIE_REG_PSCR_LNKUP BIT(11) > + > +/* ECAM definitions */ > +#define ECAM_BUS_NUM_SHIFT 20 > +#define ECAM_DEV_NUM_SHIFT 12 > + > +/* Number of MSI IRQs */ > +#define XILINX_NUM_MSI_IRQS 128 > + > +/* Number of Memory Resources */ > +#define XILINX_MAX_NUM_RESOURCES 3 > + > +/** > + * struct xilinx_pcie_port - PCIe port information > + * @reg_base: IO Mapped Register Base > + * @irq: Interrupt number > + * @msi_pages: MSI pages > + * @root_busno: Root Bus number > + * @dev: Device pointer > + * @irq_domain: IRQ domain pointer > + * @bus_range: Bus range > + * @resources: Bus Resources > + */ > +struct xilinx_pcie_port { > + void __iomem *reg_base; > + u32 irq; > + unsigned long msi_pages; > + u8 root_busno; > + struct device *dev; > + struct irq_domain *irq_domain; > + struct resource bus_range; > + struct list_head resources; > +}; > + > +static DECLARE_BITMAP(msi_irq_in_use, XILINX_NUM_MSI_IRQS); > + > +static inline struct xilinx_pcie_port *sys_to_pcie(struct pci_sys_data *sys) > +{ > + return sys->private_data; > +} > + > +static inline u32 pcie_read(struct xilinx_pcie_port *port, u32 reg) > +{ > + return readl(port->reg_base + reg); > +} > + > +static inline void pcie_write(struct xilinx_pcie_port *port, > + u32 val, u32 reg) > +{ > + writel(val, port->reg_base + reg); > +} > + > +static inline bool xilinx_pcie_link_is_up(struct xilinx_pcie_port *port) > +{ > + return (pcie_read(port, XILINX_PCIE_REG_PSCR) & > + XILINX_PCIE_REG_PSCR_LNKUP) ? 1 : 0; > +} > + > +/** > + * xilinx_pcie_clear_err_interrupts - Clear Error Interrupts > + * @port: PCIe port information > + */ > +static void xilinx_pcie_clear_err_interrupts(struct xilinx_pcie_port *port) > +{ > + u32 val = pcie_read(port, XILINX_PCIE_REG_RPEFR); > + > + if (val & XILINX_PCIE_RPEFR_ERR_VALID) { > + dev_dbg(port->dev, "Requester ID %d\n", > + val & XILINX_PCIE_RPEFR_REQ_ID); > + pcie_write(port, XILINX_PCIE_RPEFR_ALL_MASK, > + XILINX_PCIE_REG_RPEFR); > + } > +} > + > +/** > + * xilinx_pcie_valid_device - Check if a valid device is present on bus > + * @bus: PCI Bus structure > + * @devfn: device/function > + * > + * Return: 'true' on success and 'false' if invalid device is found > + */ > +static bool xilinx_pcie_valid_device(struct pci_bus *bus, > + unsigned int devfn) > +{ > + struct xilinx_pcie_port *port = sys_to_pcie(bus->sysdata); > + > + /* Check if link is up when trying to access downstream ports */ > + if (bus->number != port->root_busno) > + if (!xilinx_pcie_link_is_up(port)) > + return false; > + > + /* Only one device down on each root port */ > + if (bus->number == port->root_busno && devfn > 0) > + return false; > + > + /* > + * Do not read more than one device on the bus directly attached > + * to RC. > + */ > + if (bus->primary == port->root_busno && devfn > 0) > + return false; > + > + return true; > +} > + > +/** > + * xilinx_pcie_config_base - Get configuration base > + * @bus: PCI Bus structure > + * @devfn: Device/function > + * @where: Offset from base > + * > + * Return: Base address of the configuration space needed to be > + * accessed. > + */ > +static void __iomem *xilinx_pcie_config_base(struct pci_bus *bus, > + unsigned int devfn, > + int where) > +{ > + struct xilinx_pcie_port *port = sys_to_pcie(bus->sysdata); > + int relbus; > + > + relbus = (bus->number << ECAM_BUS_NUM_SHIFT) | > + (devfn << ECAM_DEV_NUM_SHIFT); > + > + return port->reg_base + relbus + where; > +} > + > +/** > + * xilinx_pcie_read_config - Read configuration space > + * @bus: PCI Bus structure > + * @devfn: Device/function > + * @where: Offset from base > + * @size: Byte/word/dword > + * @val: Value to be read > + * > + * Return: PCIBIOS_SUCCESSFUL on success > + * EINVAL/PCIBIOS_DEVICE_NOT_FOUND/PCIBIOS_BAD_REGISTER_NUMBER > + * on failure. > + */ > +static int xilinx_pcie_read_config(struct pci_bus *bus, > + unsigned int devfn, int where, > + int size, u32 *val) > +{ > + void __iomem *addr; > + > + if (!xilinx_pcie_valid_device(bus, devfn)) { > + *val = 0xFFFFFFFF; > + return PCIBIOS_DEVICE_NOT_FOUND; > + } > + > + addr = xilinx_pcie_config_base(bus, devfn, where); > + > + switch (size) { > + case 1: > + *val = readb(addr); > + break; > + case 2: > + *val = readw(addr); > + break; > + default: > + *val = readl(addr); > + break; > + } > + > + return PCIBIOS_SUCCESSFUL; > +} > + > +/** > + * xilinx_pcie_write_config - Write configuration space > + * @bus: PCI Bus structure > + * @devfn: Device/function > + * @where: Offset from base > + * @size: Byte/word/dword > + * @val: Value to be written to device > + * > + * Return: PCIBIOS_SUCCESSFUL on success, > + * EINVAL/PCIBIOS_DEVICE_NOT_FOUND/PCIBIOS_BAD_REGISTER_NUMBER > + * on failure. > + */ > +static int xilinx_pcie_write_config(struct pci_bus *bus, > + unsigned int devfn, int where, > + int size, u32 val) > +{ > + void __iomem *addr; > + > + if (!xilinx_pcie_valid_device(bus, devfn)) > + return PCIBIOS_DEVICE_NOT_FOUND; > + > + addr = xilinx_pcie_config_base(bus, devfn, where); > + > + switch (size) { > + case 1: > + writeb(val, addr); > + break; > + case 2: > + writew(val, addr); > + break; > + default: > + writel(val, addr); > + break; > + } > + > + return PCIBIOS_SUCCESSFUL; > +} > + > +/* PCIe operations */ > +static struct pci_ops xilinx_pcie_ops = { > + .read = xilinx_pcie_read_config, > + .write = xilinx_pcie_write_config, > +}; > + > +/* MSI functions */ > + > +/** > + * xilinx_pcie_destroy_msi - Free MSI number > + * @irq: IRQ to be freed > + */ > +static void xilinx_pcie_destroy_msi(unsigned int irq) > +{ > + struct irq_desc *desc; > + struct msi_desc *msi; > + struct xilinx_pcie_port *port; > + > + desc = irq_to_desc(irq); > + msi = irq_desc_get_msi_desc(desc); > + port = sys_to_pcie(msi->dev->bus->sysdata); > + > + if (!test_bit(irq, msi_irq_in_use)) > + dev_err(port->dev, "Trying to free unused MSI#%d\n", irq); > + else > + clear_bit(irq, msi_irq_in_use); > +} > + > +/** > + * xilinx_pcie_assign_msi - Allocate MSI number > + * @port: PCIe port structure > + * > + * Return: A valid IRQ on success and error value on failure. > + */ > +static int xilinx_pcie_assign_msi(struct xilinx_pcie_port *port) > +{ > + int pos; > + > + pos = find_first_zero_bit(msi_irq_in_use, XILINX_NUM_MSI_IRQS); > + if (pos < XILINX_NUM_MSI_IRQS) > + set_bit(pos, msi_irq_in_use); > + else > + return -ENOSPC; > + > + return pos; > +} > + > +/** > + * xilinx_msi_teardown_irq - Destroy the MSI > + * @chip: MSI Chip descriptor > + * @irq: MSI IRQ to destroy > + */ > +static void xilinx_msi_teardown_irq(struct msi_chip *chip, unsigned int irq) > +{ > + xilinx_pcie_destroy_msi(irq); > +} > + > +/** > + * xilinx_pcie_msi_setup_irq - Setup MSI request > + * @chip: MSI chip pointer > + * @pdev: PCIe device pointer > + * @desc: MSI descriptor pointer > + * > + * Return: '0' on success and error value on failure > + */ > +static int xilinx_pcie_msi_setup_irq(struct msi_chip *chip, > + struct pci_dev *pdev, > + struct msi_desc *desc) > +{ > + struct xilinx_pcie_port *port = sys_to_pcie(pdev->bus->sysdata); > + unsigned int irq; > + int hwirq; > + struct msi_msg msg; > + phys_addr_t msg_addr; > + > + hwirq = xilinx_pcie_assign_msi(port); > + if (irq < 0) > + return irq; > + > + irq = irq_create_mapping(port->irq_domain, hwirq); > + if (!irq) > + return -EINVAL; > + > + irq_set_msi_desc(irq, desc); > + > + msg_addr = virt_to_phys((void *)port->msi_pages); > + > + msg.address_hi = 0; > + msg.address_lo = msg_addr; > + msg.data = irq; > + > + write_msi_msg(irq, &msg); > + > + return 0; > +} > + > +/* MSI Chip Descriptor */ > +static struct msi_chip xilinx_pcie_msi_chip = { > + .setup_irq = xilinx_pcie_msi_setup_irq, > + .teardown_irq = xilinx_msi_teardown_irq, > +}; > + > +/* HW Interrupt Chip Descriptor */ > +static struct irq_chip xilinx_msi_irq_chip = { > + .name = "Xilinx PCIe MSI", > + .irq_enable = unmask_msi_irq, > + .irq_disable = mask_msi_irq, > + .irq_mask = mask_msi_irq, > + .irq_unmask = unmask_msi_irq, > +}; > + > +/** > + * xilinx_pcie_msi_map - Set the handler for the MSI and mark IRQ as valid > + * @domain: IRQ domain > + * @irq: Virtual IRQ number > + * @hwirq: HW interrupt number > + * > + * Return: Always returns 0. > + */ > +static int xilinx_pcie_msi_map(struct irq_domain *domain, unsigned int irq, > + irq_hw_number_t hwirq) > +{ > + irq_set_chip_and_handler(irq, &xilinx_msi_irq_chip, handle_simple_irq); > + irq_set_chip_data(irq, domain->host_data); > + set_irq_flags(irq, IRQF_VALID); > + > + return 0; > +} > + > +/* IRQ Domain operations */ > +static const struct irq_domain_ops msi_domain_ops = { > + .map = xilinx_pcie_msi_map, > +}; > + > +/** > + * xilinx_pcie_enable_msi - Enable MSI support > + * @port: PCIe port information > + */ > +static void xilinx_pcie_enable_msi(struct xilinx_pcie_port *port) > +{ > + phys_addr_t msg_addr; > + > + port->msi_pages = __get_free_pages(GFP_KERNEL, 0); > + msg_addr = virt_to_phys((void *)port->msi_pages); > + pcie_write(port, 0x0, XILINX_PCIE_REG_MSIBASE1); > + pcie_write(port, msg_addr, XILINX_PCIE_REG_MSIBASE2); > +} > + > +/** > + * xilinx_pcie_add_bus - Add MSI chip info to PCIe bus > + * @bus: PCIe bus > + */ > +static void xilinx_pcie_add_bus(struct pci_bus *bus) > +{ > + if (IS_ENABLED(CONFIG_PCI_MSI)) { > + struct xilinx_pcie_port *port = sys_to_pcie(bus->sysdata); > + > + xilinx_pcie_msi_chip.dev = port->dev; > + bus->msi = &xilinx_pcie_msi_chip; > + } > +} > + > +/* INTx Functions */ > + > +/** > + * xilinx_pcie_intx_map - Set the handler for the INTx and mark IRQ as valid > + * @domain: IRQ domain > + * @irq: Virtual IRQ number > + * @hwirq: HW interrupt number > + * > + * Return: Always returns 0. > + */ > +static int xilinx_pcie_intx_map(struct irq_domain *domain, unsigned int irq, > + irq_hw_number_t hwirq) > +{ > + irq_set_chip_and_handler(irq, &dummy_irq_chip, handle_simple_irq); > + irq_set_chip_data(irq, domain->host_data); > + set_irq_flags(irq, IRQF_VALID); > + > + return 0; > +} > + > +/* INTx IRQ Domain operations */ > +static const struct irq_domain_ops intx_domain_ops = { > + .map = xilinx_pcie_intx_map, > +}; > + > +/* PCIe HW Functions */ > + > +/** > + * xilinx_pcie_intr_handler - Interrupt Service Handler > + * @irq: IRQ number > + * @data: PCIe port information > + * > + * Return: IRQ_HANDLED on success and IRQ_NONE on failure > + */ > +static irqreturn_t xilinx_pcie_intr_handler(int irq, void *data) > +{ > + struct xilinx_pcie_port *port = (struct xilinx_pcie_port *)data; > + u32 val, mask, status, msi_data; > + > + /* Read interrupt decode and mask registers */ > + val = pcie_read(port, XILINX_PCIE_REG_IDR); > + mask = pcie_read(port, XILINX_PCIE_REG_IMR); > + > + status = val & mask; > + if (!status) > + return IRQ_NONE; > + > + if (status & XILINX_PCIE_INTR_LINK_DOWN) > + dev_warn(port->dev, "Link Down\n"); > + > + if (status & XILINX_PCIE_INTR_ECRC_ERR) > + dev_warn(port->dev, "ECRC failed\n"); > + > + if (status & XILINX_PCIE_INTR_STR_ERR) > + dev_warn(port->dev, "Streaming error\n"); > + > + if (status & XILINX_PCIE_INTR_HOT_RESET) > + dev_info(port->dev, "Hot reset\n"); > + > + if (status & XILINX_PCIE_INTR_CFG_TIMEOUT) > + dev_warn(port->dev, "ECAM access timeout\n"); > + > + if (status & XILINX_PCIE_INTR_CORRECTABLE) { > + dev_warn(port->dev, "Correctable error message\n"); > + xilinx_pcie_clear_err_interrupts(port); > + } > + > + if (status & XILINX_PCIE_INTR_NONFATAL) { > + dev_warn(port->dev, "Non fatal error message\n"); > + xilinx_pcie_clear_err_interrupts(port); > + } > + > + if (status & XILINX_PCIE_INTR_FATAL) { > + dev_warn(port->dev, "Fatal error message\n"); > + xilinx_pcie_clear_err_interrupts(port); > + } > + > + if (status & XILINX_PCIE_INTR_INTX) { > + /* INTx interrupt received */ > + val = pcie_read(port, XILINX_PCIE_REG_RPIFR1); > + > + /* Check whether interrupt valid */ > + if (!(val & XILINX_PCIE_RPIFR1_INTR_VALID)) { > + dev_warn(port->dev, "RP Intr FIFO1 read error\n"); > + return IRQ_HANDLED; > + } > + > + /* Clear interrupt FIFO register 1 */ > + pcie_write(port, XILINX_PCIE_RPIFR1_ALL_MASK, > + XILINX_PCIE_REG_RPIFR1); > + > + /* Handle INTx Interrupt */ > + val = ((val & XILINX_PCIE_RPIFR1_INTR_MASK) >> > + XILINX_PCIE_RPIFR1_INTR_SHIFT) + 1; > + generic_handle_irq(irq_find_mapping(port->irq_domain, val)); > + } > + > + if (status & XILINX_PCIE_INTR_MSI) { > + /* MSI Interrupt */ > + val = pcie_read(port, XILINX_PCIE_REG_RPIFR1); > + > + if (!(val & XILINX_PCIE_RPIFR1_INTR_VALID)) { > + dev_warn(port->dev, "RP Intr FIFO1 read error\n"); > + return IRQ_HANDLED; > + } > + > + if (val & XILINX_PCIE_RPIFR1_MSI_INTR) { > + msi_data = pcie_read(port, XILINX_PCIE_REG_RPIFR2) & > + XILINX_PCIE_RPIFR2_MSG_DATA; > + > + /* Clear interrupt FIFO register 1 */ > + pcie_write(port, XILINX_PCIE_RPIFR1_ALL_MASK, > + XILINX_PCIE_REG_RPIFR1); > + > + if (IS_ENABLED(CONFIG_PCI_MSI)) { > + /* Handle MSI Interrupt */ > + generic_handle_irq(msi_data); > + } > + } > + } > + > + if (status & XILINX_PCIE_INTR_SLV_UNSUPP) > + dev_warn(port->dev, "Slave unsupported request\n"); > + > + if (status & XILINX_PCIE_INTR_SLV_UNEXP) > + dev_warn(port->dev, "Slave unexpected completion\n"); > + > + if (status & XILINX_PCIE_INTR_SLV_COMPL) > + dev_warn(port->dev, "Slave completion timeout\n"); > + > + if (status & XILINX_PCIE_INTR_SLV_ERRP) > + dev_warn(port->dev, "Slave Error Poison\n"); > + > + if (status & XILINX_PCIE_INTR_SLV_CMPABT) > + dev_warn(port->dev, "Slave Completer Abort\n"); > + > + if (status & XILINX_PCIE_INTR_SLV_ILLBUR) > + dev_warn(port->dev, "Slave Illegal Burst\n"); > + > + if (status & XILINX_PCIE_INTR_MST_DECERR) > + dev_warn(port->dev, "Master decode error\n"); > + > + if (status & XILINX_PCIE_INTR_MST_SLVERR) > + dev_warn(port->dev, "Master slave error\n"); > + > + if (status & XILINX_PCIE_INTR_MST_ERRP) > + dev_warn(port->dev, "Master error poison\n"); > + > + /* Clear the Interrupt Decode register */ > + pcie_write(port, status, XILINX_PCIE_REG_IDR); > + > + return IRQ_HANDLED; > +} > + > +/** > + * xilinx_pcie_free_irq_domain - Free IRQ domain > + * @port: PCIe port information > + */ > +static void xilinx_pcie_free_irq_domain(struct xilinx_pcie_port *port) > +{ > + int i; > + u32 irq, num_irqs; > + > + /* Free IRQ Domain */ > + if (IS_ENABLED(CONFIG_PCI_MSI)) { > + > + free_pages(port->msi_pages, 0); > + > + num_irqs = XILINX_NUM_MSI_IRQS; > + } else { > + /* INTx */ > + num_irqs = 4; > + } > + > + for (i = 0; i < num_irqs; i++) { > + irq = irq_find_mapping(port->irq_domain, i); > + if (irq > 0) > + irq_dispose_mapping(irq); > + } > + > + irq_domain_remove(port->irq_domain); > +} > + > +/** > + * xilinx_pcie_init_irq_domain - Initialize IRQ domain > + * @port: PCIe port information > + * > + * Return: '0' on success and error value on failure > + */ > +static int xilinx_pcie_init_irq_domain(struct xilinx_pcie_port *port) > +{ > + struct device *dev = port->dev; > + struct device_node *node = dev->of_node; > + struct device_node *pcie_intc_node; > + > + /* Setup INTx */ > + pcie_intc_node = of_get_next_child(node, NULL); > + if (!pcie_intc_node) { > + dev_err(dev, "No PCIe Intc node found\n"); > + return PTR_ERR(pcie_intc_node); > + } > + > + port->irq_domain = irq_domain_add_linear(pcie_intc_node, 4, > + &intx_domain_ops, > + port); > + if (!port->irq_domain) { > + dev_err(dev, "Failed to get a INTx IRQ domain\n"); > + return PTR_ERR(port->irq_domain); > + } > + > + /* Setup MSI */ > + if (IS_ENABLED(CONFIG_PCI_MSI)) { > + port->irq_domain = irq_domain_add_linear(node, > + XILINX_NUM_MSI_IRQS, > + &msi_domain_ops, > + &xilinx_pcie_msi_chip); > + if (!port->irq_domain) { > + dev_err(dev, "Failed to get a MSI IRQ domain\n"); > + return PTR_ERR(port->irq_domain); > + } > + > + xilinx_pcie_enable_msi(port); > + } > + > + return 0; > +} > + > +/** > + * xilinx_pcie_init_port - Initialize hardware > + * @port: PCIe port information > + */ > +static void xilinx_pcie_init_port(struct xilinx_pcie_port *port) > +{ > + if (xilinx_pcie_link_is_up(port)) > + dev_info(port->dev, "PCIe Link is UP\n"); > + else > + dev_info(port->dev, "PCIe Link is DOWN\n"); > + > + /* Disable all interrupts */ > + pcie_write(port, ~XILINX_PCIE_IDR_ALL_MASK, > + XILINX_PCIE_REG_IMR); > + > + /* Clear pending interrupts */ > + pcie_write(port, pcie_read(port, XILINX_PCIE_REG_IDR) & > + XILINX_PCIE_IMR_ALL_MASK, > + XILINX_PCIE_REG_IDR); > + > + /* Enable all interrupts */ > + pcie_write(port, XILINX_PCIE_IMR_ALL_MASK, XILINX_PCIE_REG_IMR); > + > + /* Enable the Bridge enable bit */ > + pcie_write(port, pcie_read(port, XILINX_PCIE_REG_RPSC) | > + XILINX_PCIE_REG_RPSC_BEN, > + XILINX_PCIE_REG_RPSC); > +} > + > +/** > + * xilinx_pcie_setup - Setup memory resources > + * @nr: Bus number > + * @sys: Per controller structure > + * > + * Return: '1' on success and error value on failure > + */ > +static int xilinx_pcie_setup(int nr, struct pci_sys_data *sys) > +{ > + struct xilinx_pcie_port *port = sys_to_pcie(sys); > + > + list_splice_init(&port->resources, &sys->resources); > + > + return 1; > +} > + > +/** > + * xilinx_pcie_scan_bus - Scan PCIe bus for devices > + * @nr: Bus number > + * @sys: Per controller structure > + * > + * Return: Valid Bus pointer on success and NULL on failure > + */ > +static struct pci_bus *xilinx_pcie_scan_bus(int nr, > + struct pci_sys_data *sys) > +{ > + struct xilinx_pcie_port *port = sys_to_pcie(sys); > + struct pci_bus *bus; > + > + port->root_busno = sys->busnr; > + bus = pci_scan_root_bus(port->dev, sys->busnr, &xilinx_pcie_ops, > + sys, &sys->resources); > + > + return bus; > +} > + > +/** > + * xilinx_pcie_parse_and_add_res - Add resources by parsing ranges > + * @port: PCIe port information > + * > + * Return: '0' on success and error value on failure > + */ > +static int xilinx_pcie_parse_and_add_res(struct xilinx_pcie_port *port) > +{ > + struct device *dev = port->dev; > + struct device_node *node = dev->of_node; > + struct resource *mem; > + resource_size_t offset; > + struct of_pci_range_parser parser; > + struct of_pci_range range; > + struct pci_host_bridge_window *win; > + int err = 0, mem_resno = 0; > + > + /* Get the ranges */ > + if (of_pci_range_parser_init(&parser, node)) { > + dev_err(dev, "missing \"ranges\" property\n"); > + return -EINVAL; > + } > + > + /* Parse the ranges and add the resources found to the list */ > + for_each_of_pci_range(&parser, &range) { > + > + if (mem_resno >= XILINX_MAX_NUM_RESOURCES) { > + dev_err(dev, "Maximum memory resources exceeded\n"); > + return -EINVAL; > + } > + > + mem = devm_kmalloc(dev, sizeof(*mem), GFP_KERNEL); > + if (!mem) { > + err = -ENOMEM; > + goto free_resources; > + } > + > + of_pci_range_to_resource(&range, node, mem); > + > + switch (mem->flags & IORESOURCE_TYPE_BITS) { > + case IORESOURCE_MEM: > + offset = range.cpu_addr - range.pci_addr; > + mem_resno++; > + break; > + default: > + err = -EINVAL; > + break; > + } > + > + if (err < 0) { > + dev_warn(dev, "Invalid resource found %pR\n", mem); > + continue; > + } > + > + err = request_resource(&iomem_resource, mem); > + if (err) > + goto free_resources; > + > + pci_add_resource_offset(&port->resources, mem, offset); > + } > + > + /* Get the bus range */ > + if (of_pci_parse_bus_range(node, &port->bus_range)) { > + u32 val = pcie_read(port, XILINX_PCIE_REG_BIR); > + u8 last; > + > + last = (val & XILINX_PCIE_BIR_ECAM_SZ_MASK) >> > + XILINX_PCIE_BIR_ECAM_SZ_SHIFT; > + > + port->bus_range = (struct resource) { > + .name = node->name, > + .start = 0, > + .end = last, > + .flags = IORESOURCE_BUS, > + }; > + } > + > + /* Register bus resource */ > + pci_add_resource(&port->resources, &port->bus_range); > + > + return 0; > + > +free_resources: > + release_child_resources(&iomem_resource); > + list_for_each_entry(win, &port->resources, list) > + devm_kfree(dev, win->res); > + pci_free_resource_list(&port->resources); > + > + return err; > +} > + > +/** > + * xilinx_pcie_parse_dt - Parse Device tree > + * @port: PCIe port information > + * > + * Return: '0' on success and error value on failure > + */ > +static int xilinx_pcie_parse_dt(struct xilinx_pcie_port *port) > +{ > + struct device *dev = port->dev; > + struct device_node *node = dev->of_node; > + struct resource regs; > + const char *type; > + int err; > + > + type = of_get_property(node, "device_type", NULL); > + if (!type || strcmp(type, "pci")) { > + dev_err(dev, "invalid \"device_type\" %s\n", type); > + return -EINVAL; > + } > + > + err = of_address_to_resource(node, 0, ®s); > + if (err) { > + dev_err(dev, "missing \"reg\" property\n"); > + return err; > + } > + > + port->reg_base = devm_ioremap_resource(dev, ®s); > + if (IS_ERR(port->reg_base)) > + return PTR_ERR(port->reg_base); > + > + port->irq = irq_of_parse_and_map(node, 0); > + err = devm_request_irq(dev, port->irq, xilinx_pcie_intr_handler, > + IRQF_SHARED, "xilinx-pcie", port); > + if (err) { > + dev_err(dev, "unable to request irq %d\n", port->irq); > + return err; > + } > + > + return 0; > +} > + > +/** > + * xilinx_pcie_probe - Probe function > + * @pdev: Platform device pointer > + * > + * Return: '0' on success and error value on failure > + */ > +static int xilinx_pcie_probe(struct platform_device *pdev) > +{ > + struct xilinx_pcie_port *port; > + struct hw_pci hw; > + struct device *dev = &pdev->dev; > + int err; > + > + if (!dev->of_node) > + return -ENODEV; > + > + port = devm_kzalloc(dev, sizeof(*port), GFP_KERNEL); > + if (!port) > + return -ENOMEM; > + > + port->dev = dev; > + > + err = xilinx_pcie_parse_dt(port); > + if (err) { > + dev_err(dev, "Parsing DT failed\n"); > + return err; > + } > + > + xilinx_pcie_init_port(port); > + > + err = xilinx_pcie_init_irq_domain(port); > + if (err) { > + dev_err(dev, "Failed creating IRQ Domain\n"); > + return err; > + } > + > + /* > + * Parse PCI ranges, configuration bus range and > + * request their resources > + */ > + INIT_LIST_HEAD(&port->resources); > + err = xilinx_pcie_parse_and_add_res(port); > + if (err) { > + dev_err(dev, "Failed adding resources\n"); > + return err; > + } > + > + platform_set_drvdata(pdev, port); > + > + /* Register the device */ > + memset(&hw, 0, sizeof(hw)); > + hw = (struct hw_pci) { > + .nr_controllers = 1, > + .private_data = (void **)&port, > + .setup = xilinx_pcie_setup, > + .map_irq = of_irq_parse_and_map_pci, > + .add_bus = xilinx_pcie_add_bus, > + .scan = xilinx_pcie_scan_bus, > + .ops = &xilinx_pcie_ops, > + }; > + pci_common_init_dev(dev, &hw); > + > + return 0; > +} > + > +/** > + * xilinx_pcie_remove - Remove function > + * @pdev: Platform device pointer > + * > + * Return: '0' always > + */ > +static int xilinx_pcie_remove(struct platform_device *pdev) > +{ > + struct xilinx_pcie_port *port = platform_get_drvdata(pdev); > + > + xilinx_pcie_free_irq_domain(port); > + > + return 0; > +} > + > +static struct of_device_id xilinx_pcie_of_match[] = { > + { .compatible = "xlnx,axi-pcie-host-1.00.a", }, > + {} > +}; > + > +static struct platform_driver xilinx_pcie_driver = { > + .driver = { > + .name = "xilinx-pcie", > + .owner = THIS_MODULE, > + .of_match_table = xilinx_pcie_of_match, > + .suppress_bind_attrs = true, > + }, > + .probe = xilinx_pcie_probe, > + .remove = xilinx_pcie_remove, > +}; > +module_platform_driver(xilinx_pcie_driver); > + > +MODULE_AUTHOR("Xilinx Inc"); > +MODULE_DESCRIPTION("Xilinx AXI PCIe driver"); > +MODULE_LICENSE("GPL v2"); > -- > 1.7.9.5 > -- To unsubscribe from this list: send the line "unsubscribe linux-pci" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Wed, Aug 20, 2014 at 09:56:02PM +0530, Srikanth Thokala wrote: > This is the driver for Xilinx AXI PCIe Host Bridge Soft IP > > Signed-off-by: Srikanth Thokala <sthokal@xilinx.com> > Acked-by: Arnd Bergmann <arnd@arndb.de> Applied to pci/host-xilinx for v3.18, thanks! > --- > Changes in v7: > - Removed errors reported from build-bot. The errors are > mainly due to same CONFIG_PCI_XILINX flag being used for > Zynq and Microblaze platforms. So, renamed the driver > config flag name to CONFIG_PCIE_XILINX. > - Also, renamed the driver file to pcie-xilinx.c to be in > sync with CONFIG option. > - Fixed the annotation of xilinx_pcie_scan_bus() function > to remove build-bot warnings. > > Changes in v6: > - Added Ack from Arnd. Thanks Arnd. > - Rebased on 3.16-rc7. > > Changes in v5: > - Removed unnecessary checking of port structure. > - Changed the return type of verify_config from int to bool. > - Renamed following functions, > xilinx_pcie_is_link_up() -> xilinx_pcie_link_is_up() > xilinx_pcie_verify_config() -> xilinx_pcie_valid_device() > xilinx_pcie_get_config_base() -> xilinx_pcie_config_base() > - Removed link_up bool flag from port structure, as it is not > being used. > - Removed unused constants. > - Rebased on 3.16-rc6. > - Fixed some minor comments. > - Thanks Bjorn for the review. > > Changes in v4: > - Regarding the comments to separate ECAM functionality, > I have sent a separate patch and it is decided to implement > it later. The patch is here, > https://lkml.org/lkml/2014/5/18/54 > - Fixed issue with adding configuration bus resource. > - Moved the logic for setting up bus resources to probe() from > pcie_setup(). > - Instead of mapping all the MSI interrupts in the probe, changed > to map only when a MSI is requested. > - Earlier, the implementation of legacy and MSI interrupts init- > is mutually exclusive, now changed to have the legacy interrupts > init always and MSI interrupt init based on CONFIG_PCI_MSI flag. > - Regarding the MSI generic implementation comment, I will plan to > do on top of this driver patch. > - Rebased on 3.16-rc2. > - Fixed other minor comments. > - Thanks Arnd and Bjorn for the review. > > Changes in v3: > - Rebased on v3.15.0-rc1 > - Added support for interrupt-map DT functionality. > - Removed map_irq() wrapper, instead using of_irq_parse_and_map_pci(). > - Modified resource mapping logic as per the series > "PCI: ARM: add support for generic PCI host controller" > - Modified devicetree binding documentation to update with interrupt- > map properties. > - Use devm calls wherever applicable. > - Fixed minor comments from Jason > - Thanks Jason for the review and suggestions. > > Changes in v2: > - Rebased on v3.14.0-rc8 > - Removed IP specific DT properties like include-rc, axibar-num etc., > as suggested by Jason and Bjorn, Thanks > --- > .../devicetree/bindings/pci/xilinx-pcie.txt | 62 ++ > drivers/pci/host/Kconfig | 7 + > drivers/pci/host/Makefile | 1 + > drivers/pci/host/pcie-xilinx.c | 978 ++++++++++++++++++++ > 4 files changed, 1048 insertions(+) > create mode 100644 Documentation/devicetree/bindings/pci/xilinx-pcie.txt > create mode 100644 drivers/pci/host/pcie-xilinx.c > > diff --git a/Documentation/devicetree/bindings/pci/xilinx-pcie.txt b/Documentation/devicetree/bindings/pci/xilinx-pcie.txt > new file mode 100644 > index 0000000..3e2c88d > --- /dev/null > +++ b/Documentation/devicetree/bindings/pci/xilinx-pcie.txt > @@ -0,0 +1,62 @@ > +* Xilinx AXI PCIe Root Port Bridge DT description > + > +Required properties: > +- #address-cells: Address representation for root ports, set to <3> > +- #size-cells: Size representation for root ports, set to <2> > +- #interrupt-cells: specifies the number of cells needed to encode an > + interrupt source. The value must be 1. > +- compatible: Should contain "xlnx,axi-pcie-host-1.00.a" > +- reg: Should contain AXI PCIe registers location and length > +- device_type: must be "pci" > +- interrupts: Should contain AXI PCIe interrupt > +- interrupt-map-mask, > + interrupt-map: standard PCI properties to define the mapping of the > + PCI interface to interrupt numbers. > +- ranges: ranges for the PCI memory regions (I/O space region is not > + supported by hardware) > + Please refer to the standard PCI bus binding document for a more > + detailed explanation > + > +Optional properties: > +- bus-range: PCI bus numbers covered > + > +Interrupt controller child node > ++++++++++++++++++++++++++++++++ > +Required properties: > +- interrupt-controller: identifies the node as an interrupt controller > +- #address-cells: specifies the number of cells needed to encode an > + address. The value must be 0. > +- #interrupt-cells: specifies the number of cells needed to encode an > + interrupt source. The value must be 1. > + > +NOTE: > +The core provides a single interrupt for both INTx/MSI messages. So, > +created a interrupt controller node to support 'interrupt-map' DT > +functionality. The driver will create an IRQ domain for this map, decode > +the four INTx interrupts in ISR and route them to this domain. > + > + > +Example: > +++++++++ > + > + pci_express: axi-pcie@50000000 { > + #address-cells = <3>; > + #size-cells = <2>; > + #interrupt-cells = <1>; > + compatible = "xlnx,axi-pcie-host-1.00.a"; > + reg = < 0x50000000 0x10000000 >; > + device_type = "pci"; > + interrupts = < 0 52 4 >; > + interrupt-map-mask = <0 0 0 7>; > + interrupt-map = <0 0 0 1 &pcie_intc 1>, > + <0 0 0 2 &pcie_intc 2>, > + <0 0 0 3 &pcie_intc 3>, > + <0 0 0 4 &pcie_intc 4>; > + ranges = < 0x02000000 0 0x60000000 0x60000000 0 0x10000000 >; > + > + pcie_intc: interrupt-controller { > + interrupt-controller; > + #address-cells = <0>; > + #interrupt-cells = <1>; > + } > + }; > diff --git a/drivers/pci/host/Kconfig b/drivers/pci/host/Kconfig > index 21df477..255a9fa 100644 > --- a/drivers/pci/host/Kconfig > +++ b/drivers/pci/host/Kconfig > @@ -46,4 +46,11 @@ config PCI_HOST_GENERIC > Say Y here if you want to support a simple generic PCI host > controller, such as the one emulated by kvmtool. > > +config PCIE_XILINX > + bool "Xilinx AXI PCIe host bridge support" > + depends on ARCH_ZYNQ > + help > + Say 'Y' here if you want kernel to support the Xilinx AXI PCIe > + Host Bridge driver. > + > endmenu > diff --git a/drivers/pci/host/Makefile b/drivers/pci/host/Makefile > index 611ba4b..339595c 100644 > --- a/drivers/pci/host/Makefile > +++ b/drivers/pci/host/Makefile > @@ -6,3 +6,4 @@ obj-$(CONFIG_PCI_TEGRA) += pci-tegra.o > obj-$(CONFIG_PCI_RCAR_GEN2) += pci-rcar-gen2.o > obj-$(CONFIG_PCI_RCAR_GEN2_PCIE) += pcie-rcar.o > obj-$(CONFIG_PCI_HOST_GENERIC) += pci-host-generic.o > +obj-$(CONFIG_PCIE_XILINX) += pcie-xilinx.o > diff --git a/drivers/pci/host/pcie-xilinx.c b/drivers/pci/host/pcie-xilinx.c > new file mode 100644 > index 0000000..32c5ded > --- /dev/null > +++ b/drivers/pci/host/pcie-xilinx.c > @@ -0,0 +1,978 @@ > +/* > + * PCIe host controller driver for Xilinx AXI PCIe Bridge > + * > + * Copyright (c) 2012 - 2014 Xilinx, Inc. > + * > + * Based on the Tegra PCIe driver > + * > + * Bits taken from Synopsys Designware Host controller driver and > + * ARM PCI Host generic driver. > + * > + * This program is free software: you can redistribute it and/or modify > + * it under the terms of the GNU General Public License as published by > + * the Free Software Foundation, either version 2 of the License, or > + * (at your option) any later version. > + */ > + > +#include <linux/interrupt.h> > +#include <linux/irq.h> > +#include <linux/irqdomain.h> > +#include <linux/kernel.h> > +#include <linux/module.h> > +#include <linux/msi.h> > +#include <linux/of_address.h> > +#include <linux/of_pci.h> > +#include <linux/of_platform.h> > +#include <linux/of_irq.h> > +#include <linux/pci.h> > +#include <linux/platform_device.h> > + > +/* Register definitions */ > +#define XILINX_PCIE_REG_BIR 0x00000130 > +#define XILINX_PCIE_REG_IDR 0x00000138 > +#define XILINX_PCIE_REG_IMR 0x0000013c > +#define XILINX_PCIE_REG_PSCR 0x00000144 > +#define XILINX_PCIE_REG_RPSC 0x00000148 > +#define XILINX_PCIE_REG_MSIBASE1 0x0000014c > +#define XILINX_PCIE_REG_MSIBASE2 0x00000150 > +#define XILINX_PCIE_REG_RPEFR 0x00000154 > +#define XILINX_PCIE_REG_RPIFR1 0x00000158 > +#define XILINX_PCIE_REG_RPIFR2 0x0000015c > + > +/* Interrupt registers definitions */ > +#define XILINX_PCIE_INTR_LINK_DOWN BIT(0) > +#define XILINX_PCIE_INTR_ECRC_ERR BIT(1) > +#define XILINX_PCIE_INTR_STR_ERR BIT(2) > +#define XILINX_PCIE_INTR_HOT_RESET BIT(3) > +#define XILINX_PCIE_INTR_CFG_TIMEOUT BIT(8) > +#define XILINX_PCIE_INTR_CORRECTABLE BIT(9) > +#define XILINX_PCIE_INTR_NONFATAL BIT(10) > +#define XILINX_PCIE_INTR_FATAL BIT(11) > +#define XILINX_PCIE_INTR_INTX BIT(16) > +#define XILINX_PCIE_INTR_MSI BIT(17) > +#define XILINX_PCIE_INTR_SLV_UNSUPP BIT(20) > +#define XILINX_PCIE_INTR_SLV_UNEXP BIT(21) > +#define XILINX_PCIE_INTR_SLV_COMPL BIT(22) > +#define XILINX_PCIE_INTR_SLV_ERRP BIT(23) > +#define XILINX_PCIE_INTR_SLV_CMPABT BIT(24) > +#define XILINX_PCIE_INTR_SLV_ILLBUR BIT(25) > +#define XILINX_PCIE_INTR_MST_DECERR BIT(26) > +#define XILINX_PCIE_INTR_MST_SLVERR BIT(27) > +#define XILINX_PCIE_INTR_MST_ERRP BIT(28) > +#define XILINX_PCIE_IMR_ALL_MASK 0x1FF30FED > +#define XILINX_PCIE_IDR_ALL_MASK 0xFFFFFFFF > + > +/* Root Port Error FIFO Read Register definitions */ > +#define XILINX_PCIE_RPEFR_ERR_VALID BIT(18) > +#define XILINX_PCIE_RPEFR_REQ_ID GENMASK(15, 0) > +#define XILINX_PCIE_RPEFR_ALL_MASK 0xFFFFFFFF > + > +/* Root Port Interrupt FIFO Read Register 1 definitions */ > +#define XILINX_PCIE_RPIFR1_INTR_VALID BIT(31) > +#define XILINX_PCIE_RPIFR1_MSI_INTR BIT(30) > +#define XILINX_PCIE_RPIFR1_INTR_MASK GENMASK(28, 27) > +#define XILINX_PCIE_RPIFR1_ALL_MASK 0xFFFFFFFF > +#define XILINX_PCIE_RPIFR1_INTR_SHIFT 27 > + > +/* Bridge Info Register definitions */ > +#define XILINX_PCIE_BIR_ECAM_SZ_MASK GENMASK(18, 16) > +#define XILINX_PCIE_BIR_ECAM_SZ_SHIFT 16 > + > +/* Root Port Interrupt FIFO Read Register 2 definitions */ > +#define XILINX_PCIE_RPIFR2_MSG_DATA GENMASK(15, 0) > + > +/* Root Port Status/control Register definitions */ > +#define XILINX_PCIE_REG_RPSC_BEN BIT(0) > + > +/* Phy Status/Control Register definitions */ > +#define XILINX_PCIE_REG_PSCR_LNKUP BIT(11) > + > +/* ECAM definitions */ > +#define ECAM_BUS_NUM_SHIFT 20 > +#define ECAM_DEV_NUM_SHIFT 12 > + > +/* Number of MSI IRQs */ > +#define XILINX_NUM_MSI_IRQS 128 > + > +/* Number of Memory Resources */ > +#define XILINX_MAX_NUM_RESOURCES 3 > + > +/** > + * struct xilinx_pcie_port - PCIe port information > + * @reg_base: IO Mapped Register Base > + * @irq: Interrupt number > + * @msi_pages: MSI pages > + * @root_busno: Root Bus number > + * @dev: Device pointer > + * @irq_domain: IRQ domain pointer > + * @bus_range: Bus range > + * @resources: Bus Resources > + */ > +struct xilinx_pcie_port { > + void __iomem *reg_base; > + u32 irq; > + unsigned long msi_pages; > + u8 root_busno; > + struct device *dev; > + struct irq_domain *irq_domain; > + struct resource bus_range; > + struct list_head resources; > +}; > + > +static DECLARE_BITMAP(msi_irq_in_use, XILINX_NUM_MSI_IRQS); > + > +static inline struct xilinx_pcie_port *sys_to_pcie(struct pci_sys_data *sys) > +{ > + return sys->private_data; > +} > + > +static inline u32 pcie_read(struct xilinx_pcie_port *port, u32 reg) > +{ > + return readl(port->reg_base + reg); > +} > + > +static inline void pcie_write(struct xilinx_pcie_port *port, > + u32 val, u32 reg) > +{ > + writel(val, port->reg_base + reg); > +} > + > +static inline bool xilinx_pcie_link_is_up(struct xilinx_pcie_port *port) > +{ > + return (pcie_read(port, XILINX_PCIE_REG_PSCR) & > + XILINX_PCIE_REG_PSCR_LNKUP) ? 1 : 0; > +} > + > +/** > + * xilinx_pcie_clear_err_interrupts - Clear Error Interrupts > + * @port: PCIe port information > + */ > +static void xilinx_pcie_clear_err_interrupts(struct xilinx_pcie_port *port) > +{ > + u32 val = pcie_read(port, XILINX_PCIE_REG_RPEFR); > + > + if (val & XILINX_PCIE_RPEFR_ERR_VALID) { > + dev_dbg(port->dev, "Requester ID %d\n", > + val & XILINX_PCIE_RPEFR_REQ_ID); > + pcie_write(port, XILINX_PCIE_RPEFR_ALL_MASK, > + XILINX_PCIE_REG_RPEFR); > + } > +} > + > +/** > + * xilinx_pcie_valid_device - Check if a valid device is present on bus > + * @bus: PCI Bus structure > + * @devfn: device/function > + * > + * Return: 'true' on success and 'false' if invalid device is found > + */ > +static bool xilinx_pcie_valid_device(struct pci_bus *bus, > + unsigned int devfn) > +{ > + struct xilinx_pcie_port *port = sys_to_pcie(bus->sysdata); > + > + /* Check if link is up when trying to access downstream ports */ > + if (bus->number != port->root_busno) > + if (!xilinx_pcie_link_is_up(port)) > + return false; > + > + /* Only one device down on each root port */ > + if (bus->number == port->root_busno && devfn > 0) > + return false; > + > + /* > + * Do not read more than one device on the bus directly attached > + * to RC. > + */ > + if (bus->primary == port->root_busno && devfn > 0) > + return false; > + > + return true; > +} > + > +/** > + * xilinx_pcie_config_base - Get configuration base > + * @bus: PCI Bus structure > + * @devfn: Device/function > + * @where: Offset from base > + * > + * Return: Base address of the configuration space needed to be > + * accessed. > + */ > +static void __iomem *xilinx_pcie_config_base(struct pci_bus *bus, > + unsigned int devfn, > + int where) > +{ > + struct xilinx_pcie_port *port = sys_to_pcie(bus->sysdata); > + int relbus; > + > + relbus = (bus->number << ECAM_BUS_NUM_SHIFT) | > + (devfn << ECAM_DEV_NUM_SHIFT); > + > + return port->reg_base + relbus + where; > +} > + > +/** > + * xilinx_pcie_read_config - Read configuration space > + * @bus: PCI Bus structure > + * @devfn: Device/function > + * @where: Offset from base > + * @size: Byte/word/dword > + * @val: Value to be read > + * > + * Return: PCIBIOS_SUCCESSFUL on success > + * EINVAL/PCIBIOS_DEVICE_NOT_FOUND/PCIBIOS_BAD_REGISTER_NUMBER > + * on failure. > + */ > +static int xilinx_pcie_read_config(struct pci_bus *bus, > + unsigned int devfn, int where, > + int size, u32 *val) > +{ > + void __iomem *addr; > + > + if (!xilinx_pcie_valid_device(bus, devfn)) { > + *val = 0xFFFFFFFF; > + return PCIBIOS_DEVICE_NOT_FOUND; > + } > + > + addr = xilinx_pcie_config_base(bus, devfn, where); > + > + switch (size) { > + case 1: > + *val = readb(addr); > + break; > + case 2: > + *val = readw(addr); > + break; > + default: > + *val = readl(addr); > + break; > + } > + > + return PCIBIOS_SUCCESSFUL; > +} > + > +/** > + * xilinx_pcie_write_config - Write configuration space > + * @bus: PCI Bus structure > + * @devfn: Device/function > + * @where: Offset from base > + * @size: Byte/word/dword > + * @val: Value to be written to device > + * > + * Return: PCIBIOS_SUCCESSFUL on success, > + * EINVAL/PCIBIOS_DEVICE_NOT_FOUND/PCIBIOS_BAD_REGISTER_NUMBER > + * on failure. > + */ > +static int xilinx_pcie_write_config(struct pci_bus *bus, > + unsigned int devfn, int where, > + int size, u32 val) > +{ > + void __iomem *addr; > + > + if (!xilinx_pcie_valid_device(bus, devfn)) > + return PCIBIOS_DEVICE_NOT_FOUND; > + > + addr = xilinx_pcie_config_base(bus, devfn, where); > + > + switch (size) { > + case 1: > + writeb(val, addr); > + break; > + case 2: > + writew(val, addr); > + break; > + default: > + writel(val, addr); > + break; > + } > + > + return PCIBIOS_SUCCESSFUL; > +} > + > +/* PCIe operations */ > +static struct pci_ops xilinx_pcie_ops = { > + .read = xilinx_pcie_read_config, > + .write = xilinx_pcie_write_config, > +}; > + > +/* MSI functions */ > + > +/** > + * xilinx_pcie_destroy_msi - Free MSI number > + * @irq: IRQ to be freed > + */ > +static void xilinx_pcie_destroy_msi(unsigned int irq) > +{ > + struct irq_desc *desc; > + struct msi_desc *msi; > + struct xilinx_pcie_port *port; > + > + desc = irq_to_desc(irq); > + msi = irq_desc_get_msi_desc(desc); > + port = sys_to_pcie(msi->dev->bus->sysdata); > + > + if (!test_bit(irq, msi_irq_in_use)) > + dev_err(port->dev, "Trying to free unused MSI#%d\n", irq); > + else > + clear_bit(irq, msi_irq_in_use); > +} > + > +/** > + * xilinx_pcie_assign_msi - Allocate MSI number > + * @port: PCIe port structure > + * > + * Return: A valid IRQ on success and error value on failure. > + */ > +static int xilinx_pcie_assign_msi(struct xilinx_pcie_port *port) > +{ > + int pos; > + > + pos = find_first_zero_bit(msi_irq_in_use, XILINX_NUM_MSI_IRQS); > + if (pos < XILINX_NUM_MSI_IRQS) > + set_bit(pos, msi_irq_in_use); > + else > + return -ENOSPC; > + > + return pos; > +} > + > +/** > + * xilinx_msi_teardown_irq - Destroy the MSI > + * @chip: MSI Chip descriptor > + * @irq: MSI IRQ to destroy > + */ > +static void xilinx_msi_teardown_irq(struct msi_chip *chip, unsigned int irq) > +{ > + xilinx_pcie_destroy_msi(irq); > +} > + > +/** > + * xilinx_pcie_msi_setup_irq - Setup MSI request > + * @chip: MSI chip pointer > + * @pdev: PCIe device pointer > + * @desc: MSI descriptor pointer > + * > + * Return: '0' on success and error value on failure > + */ > +static int xilinx_pcie_msi_setup_irq(struct msi_chip *chip, > + struct pci_dev *pdev, > + struct msi_desc *desc) > +{ > + struct xilinx_pcie_port *port = sys_to_pcie(pdev->bus->sysdata); > + unsigned int irq; > + int hwirq; > + struct msi_msg msg; > + phys_addr_t msg_addr; > + > + hwirq = xilinx_pcie_assign_msi(port); > + if (irq < 0) > + return irq; > + > + irq = irq_create_mapping(port->irq_domain, hwirq); > + if (!irq) > + return -EINVAL; > + > + irq_set_msi_desc(irq, desc); > + > + msg_addr = virt_to_phys((void *)port->msi_pages); > + > + msg.address_hi = 0; > + msg.address_lo = msg_addr; > + msg.data = irq; > + > + write_msi_msg(irq, &msg); > + > + return 0; > +} > + > +/* MSI Chip Descriptor */ > +static struct msi_chip xilinx_pcie_msi_chip = { > + .setup_irq = xilinx_pcie_msi_setup_irq, > + .teardown_irq = xilinx_msi_teardown_irq, > +}; > + > +/* HW Interrupt Chip Descriptor */ > +static struct irq_chip xilinx_msi_irq_chip = { > + .name = "Xilinx PCIe MSI", > + .irq_enable = unmask_msi_irq, > + .irq_disable = mask_msi_irq, > + .irq_mask = mask_msi_irq, > + .irq_unmask = unmask_msi_irq, > +}; > + > +/** > + * xilinx_pcie_msi_map - Set the handler for the MSI and mark IRQ as valid > + * @domain: IRQ domain > + * @irq: Virtual IRQ number > + * @hwirq: HW interrupt number > + * > + * Return: Always returns 0. > + */ > +static int xilinx_pcie_msi_map(struct irq_domain *domain, unsigned int irq, > + irq_hw_number_t hwirq) > +{ > + irq_set_chip_and_handler(irq, &xilinx_msi_irq_chip, handle_simple_irq); > + irq_set_chip_data(irq, domain->host_data); > + set_irq_flags(irq, IRQF_VALID); > + > + return 0; > +} > + > +/* IRQ Domain operations */ > +static const struct irq_domain_ops msi_domain_ops = { > + .map = xilinx_pcie_msi_map, > +}; > + > +/** > + * xilinx_pcie_enable_msi - Enable MSI support > + * @port: PCIe port information > + */ > +static void xilinx_pcie_enable_msi(struct xilinx_pcie_port *port) > +{ > + phys_addr_t msg_addr; > + > + port->msi_pages = __get_free_pages(GFP_KERNEL, 0); > + msg_addr = virt_to_phys((void *)port->msi_pages); > + pcie_write(port, 0x0, XILINX_PCIE_REG_MSIBASE1); > + pcie_write(port, msg_addr, XILINX_PCIE_REG_MSIBASE2); > +} > + > +/** > + * xilinx_pcie_add_bus - Add MSI chip info to PCIe bus > + * @bus: PCIe bus > + */ > +static void xilinx_pcie_add_bus(struct pci_bus *bus) > +{ > + if (IS_ENABLED(CONFIG_PCI_MSI)) { > + struct xilinx_pcie_port *port = sys_to_pcie(bus->sysdata); > + > + xilinx_pcie_msi_chip.dev = port->dev; > + bus->msi = &xilinx_pcie_msi_chip; > + } > +} > + > +/* INTx Functions */ > + > +/** > + * xilinx_pcie_intx_map - Set the handler for the INTx and mark IRQ as valid > + * @domain: IRQ domain > + * @irq: Virtual IRQ number > + * @hwirq: HW interrupt number > + * > + * Return: Always returns 0. > + */ > +static int xilinx_pcie_intx_map(struct irq_domain *domain, unsigned int irq, > + irq_hw_number_t hwirq) > +{ > + irq_set_chip_and_handler(irq, &dummy_irq_chip, handle_simple_irq); > + irq_set_chip_data(irq, domain->host_data); > + set_irq_flags(irq, IRQF_VALID); > + > + return 0; > +} > + > +/* INTx IRQ Domain operations */ > +static const struct irq_domain_ops intx_domain_ops = { > + .map = xilinx_pcie_intx_map, > +}; > + > +/* PCIe HW Functions */ > + > +/** > + * xilinx_pcie_intr_handler - Interrupt Service Handler > + * @irq: IRQ number > + * @data: PCIe port information > + * > + * Return: IRQ_HANDLED on success and IRQ_NONE on failure > + */ > +static irqreturn_t xilinx_pcie_intr_handler(int irq, void *data) > +{ > + struct xilinx_pcie_port *port = (struct xilinx_pcie_port *)data; > + u32 val, mask, status, msi_data; > + > + /* Read interrupt decode and mask registers */ > + val = pcie_read(port, XILINX_PCIE_REG_IDR); > + mask = pcie_read(port, XILINX_PCIE_REG_IMR); > + > + status = val & mask; > + if (!status) > + return IRQ_NONE; > + > + if (status & XILINX_PCIE_INTR_LINK_DOWN) > + dev_warn(port->dev, "Link Down\n"); > + > + if (status & XILINX_PCIE_INTR_ECRC_ERR) > + dev_warn(port->dev, "ECRC failed\n"); > + > + if (status & XILINX_PCIE_INTR_STR_ERR) > + dev_warn(port->dev, "Streaming error\n"); > + > + if (status & XILINX_PCIE_INTR_HOT_RESET) > + dev_info(port->dev, "Hot reset\n"); > + > + if (status & XILINX_PCIE_INTR_CFG_TIMEOUT) > + dev_warn(port->dev, "ECAM access timeout\n"); > + > + if (status & XILINX_PCIE_INTR_CORRECTABLE) { > + dev_warn(port->dev, "Correctable error message\n"); > + xilinx_pcie_clear_err_interrupts(port); > + } > + > + if (status & XILINX_PCIE_INTR_NONFATAL) { > + dev_warn(port->dev, "Non fatal error message\n"); > + xilinx_pcie_clear_err_interrupts(port); > + } > + > + if (status & XILINX_PCIE_INTR_FATAL) { > + dev_warn(port->dev, "Fatal error message\n"); > + xilinx_pcie_clear_err_interrupts(port); > + } > + > + if (status & XILINX_PCIE_INTR_INTX) { > + /* INTx interrupt received */ > + val = pcie_read(port, XILINX_PCIE_REG_RPIFR1); > + > + /* Check whether interrupt valid */ > + if (!(val & XILINX_PCIE_RPIFR1_INTR_VALID)) { > + dev_warn(port->dev, "RP Intr FIFO1 read error\n"); > + return IRQ_HANDLED; > + } > + > + /* Clear interrupt FIFO register 1 */ > + pcie_write(port, XILINX_PCIE_RPIFR1_ALL_MASK, > + XILINX_PCIE_REG_RPIFR1); > + > + /* Handle INTx Interrupt */ > + val = ((val & XILINX_PCIE_RPIFR1_INTR_MASK) >> > + XILINX_PCIE_RPIFR1_INTR_SHIFT) + 1; > + generic_handle_irq(irq_find_mapping(port->irq_domain, val)); > + } > + > + if (status & XILINX_PCIE_INTR_MSI) { > + /* MSI Interrupt */ > + val = pcie_read(port, XILINX_PCIE_REG_RPIFR1); > + > + if (!(val & XILINX_PCIE_RPIFR1_INTR_VALID)) { > + dev_warn(port->dev, "RP Intr FIFO1 read error\n"); > + return IRQ_HANDLED; > + } > + > + if (val & XILINX_PCIE_RPIFR1_MSI_INTR) { > + msi_data = pcie_read(port, XILINX_PCIE_REG_RPIFR2) & > + XILINX_PCIE_RPIFR2_MSG_DATA; > + > + /* Clear interrupt FIFO register 1 */ > + pcie_write(port, XILINX_PCIE_RPIFR1_ALL_MASK, > + XILINX_PCIE_REG_RPIFR1); > + > + if (IS_ENABLED(CONFIG_PCI_MSI)) { > + /* Handle MSI Interrupt */ > + generic_handle_irq(msi_data); > + } > + } > + } > + > + if (status & XILINX_PCIE_INTR_SLV_UNSUPP) > + dev_warn(port->dev, "Slave unsupported request\n"); > + > + if (status & XILINX_PCIE_INTR_SLV_UNEXP) > + dev_warn(port->dev, "Slave unexpected completion\n"); > + > + if (status & XILINX_PCIE_INTR_SLV_COMPL) > + dev_warn(port->dev, "Slave completion timeout\n"); > + > + if (status & XILINX_PCIE_INTR_SLV_ERRP) > + dev_warn(port->dev, "Slave Error Poison\n"); > + > + if (status & XILINX_PCIE_INTR_SLV_CMPABT) > + dev_warn(port->dev, "Slave Completer Abort\n"); > + > + if (status & XILINX_PCIE_INTR_SLV_ILLBUR) > + dev_warn(port->dev, "Slave Illegal Burst\n"); > + > + if (status & XILINX_PCIE_INTR_MST_DECERR) > + dev_warn(port->dev, "Master decode error\n"); > + > + if (status & XILINX_PCIE_INTR_MST_SLVERR) > + dev_warn(port->dev, "Master slave error\n"); > + > + if (status & XILINX_PCIE_INTR_MST_ERRP) > + dev_warn(port->dev, "Master error poison\n"); > + > + /* Clear the Interrupt Decode register */ > + pcie_write(port, status, XILINX_PCIE_REG_IDR); > + > + return IRQ_HANDLED; > +} > + > +/** > + * xilinx_pcie_free_irq_domain - Free IRQ domain > + * @port: PCIe port information > + */ > +static void xilinx_pcie_free_irq_domain(struct xilinx_pcie_port *port) > +{ > + int i; > + u32 irq, num_irqs; > + > + /* Free IRQ Domain */ > + if (IS_ENABLED(CONFIG_PCI_MSI)) { > + > + free_pages(port->msi_pages, 0); > + > + num_irqs = XILINX_NUM_MSI_IRQS; > + } else { > + /* INTx */ > + num_irqs = 4; > + } > + > + for (i = 0; i < num_irqs; i++) { > + irq = irq_find_mapping(port->irq_domain, i); > + if (irq > 0) > + irq_dispose_mapping(irq); > + } > + > + irq_domain_remove(port->irq_domain); > +} > + > +/** > + * xilinx_pcie_init_irq_domain - Initialize IRQ domain > + * @port: PCIe port information > + * > + * Return: '0' on success and error value on failure > + */ > +static int xilinx_pcie_init_irq_domain(struct xilinx_pcie_port *port) > +{ > + struct device *dev = port->dev; > + struct device_node *node = dev->of_node; > + struct device_node *pcie_intc_node; > + > + /* Setup INTx */ > + pcie_intc_node = of_get_next_child(node, NULL); > + if (!pcie_intc_node) { > + dev_err(dev, "No PCIe Intc node found\n"); > + return PTR_ERR(pcie_intc_node); > + } > + > + port->irq_domain = irq_domain_add_linear(pcie_intc_node, 4, > + &intx_domain_ops, > + port); > + if (!port->irq_domain) { > + dev_err(dev, "Failed to get a INTx IRQ domain\n"); > + return PTR_ERR(port->irq_domain); > + } > + > + /* Setup MSI */ > + if (IS_ENABLED(CONFIG_PCI_MSI)) { > + port->irq_domain = irq_domain_add_linear(node, > + XILINX_NUM_MSI_IRQS, > + &msi_domain_ops, > + &xilinx_pcie_msi_chip); > + if (!port->irq_domain) { > + dev_err(dev, "Failed to get a MSI IRQ domain\n"); > + return PTR_ERR(port->irq_domain); > + } > + > + xilinx_pcie_enable_msi(port); > + } > + > + return 0; > +} > + > +/** > + * xilinx_pcie_init_port - Initialize hardware > + * @port: PCIe port information > + */ > +static void xilinx_pcie_init_port(struct xilinx_pcie_port *port) > +{ > + if (xilinx_pcie_link_is_up(port)) > + dev_info(port->dev, "PCIe Link is UP\n"); > + else > + dev_info(port->dev, "PCIe Link is DOWN\n"); > + > + /* Disable all interrupts */ > + pcie_write(port, ~XILINX_PCIE_IDR_ALL_MASK, > + XILINX_PCIE_REG_IMR); > + > + /* Clear pending interrupts */ > + pcie_write(port, pcie_read(port, XILINX_PCIE_REG_IDR) & > + XILINX_PCIE_IMR_ALL_MASK, > + XILINX_PCIE_REG_IDR); > + > + /* Enable all interrupts */ > + pcie_write(port, XILINX_PCIE_IMR_ALL_MASK, XILINX_PCIE_REG_IMR); > + > + /* Enable the Bridge enable bit */ > + pcie_write(port, pcie_read(port, XILINX_PCIE_REG_RPSC) | > + XILINX_PCIE_REG_RPSC_BEN, > + XILINX_PCIE_REG_RPSC); > +} > + > +/** > + * xilinx_pcie_setup - Setup memory resources > + * @nr: Bus number > + * @sys: Per controller structure > + * > + * Return: '1' on success and error value on failure > + */ > +static int xilinx_pcie_setup(int nr, struct pci_sys_data *sys) > +{ > + struct xilinx_pcie_port *port = sys_to_pcie(sys); > + > + list_splice_init(&port->resources, &sys->resources); > + > + return 1; > +} > + > +/** > + * xilinx_pcie_scan_bus - Scan PCIe bus for devices > + * @nr: Bus number > + * @sys: Per controller structure > + * > + * Return: Valid Bus pointer on success and NULL on failure > + */ > +static struct pci_bus *xilinx_pcie_scan_bus(int nr, > + struct pci_sys_data *sys) > +{ > + struct xilinx_pcie_port *port = sys_to_pcie(sys); > + struct pci_bus *bus; > + > + port->root_busno = sys->busnr; > + bus = pci_scan_root_bus(port->dev, sys->busnr, &xilinx_pcie_ops, > + sys, &sys->resources); > + > + return bus; > +} > + > +/** > + * xilinx_pcie_parse_and_add_res - Add resources by parsing ranges > + * @port: PCIe port information > + * > + * Return: '0' on success and error value on failure > + */ > +static int xilinx_pcie_parse_and_add_res(struct xilinx_pcie_port *port) > +{ > + struct device *dev = port->dev; > + struct device_node *node = dev->of_node; > + struct resource *mem; > + resource_size_t offset; > + struct of_pci_range_parser parser; > + struct of_pci_range range; > + struct pci_host_bridge_window *win; > + int err = 0, mem_resno = 0; > + > + /* Get the ranges */ > + if (of_pci_range_parser_init(&parser, node)) { > + dev_err(dev, "missing \"ranges\" property\n"); > + return -EINVAL; > + } > + > + /* Parse the ranges and add the resources found to the list */ > + for_each_of_pci_range(&parser, &range) { > + > + if (mem_resno >= XILINX_MAX_NUM_RESOURCES) { > + dev_err(dev, "Maximum memory resources exceeded\n"); > + return -EINVAL; > + } > + > + mem = devm_kmalloc(dev, sizeof(*mem), GFP_KERNEL); > + if (!mem) { > + err = -ENOMEM; > + goto free_resources; > + } > + > + of_pci_range_to_resource(&range, node, mem); > + > + switch (mem->flags & IORESOURCE_TYPE_BITS) { > + case IORESOURCE_MEM: > + offset = range.cpu_addr - range.pci_addr; > + mem_resno++; > + break; > + default: > + err = -EINVAL; > + break; > + } > + > + if (err < 0) { > + dev_warn(dev, "Invalid resource found %pR\n", mem); > + continue; > + } > + > + err = request_resource(&iomem_resource, mem); > + if (err) > + goto free_resources; > + > + pci_add_resource_offset(&port->resources, mem, offset); > + } > + > + /* Get the bus range */ > + if (of_pci_parse_bus_range(node, &port->bus_range)) { > + u32 val = pcie_read(port, XILINX_PCIE_REG_BIR); > + u8 last; > + > + last = (val & XILINX_PCIE_BIR_ECAM_SZ_MASK) >> > + XILINX_PCIE_BIR_ECAM_SZ_SHIFT; > + > + port->bus_range = (struct resource) { > + .name = node->name, > + .start = 0, > + .end = last, > + .flags = IORESOURCE_BUS, > + }; > + } > + > + /* Register bus resource */ > + pci_add_resource(&port->resources, &port->bus_range); > + > + return 0; > + > +free_resources: > + release_child_resources(&iomem_resource); > + list_for_each_entry(win, &port->resources, list) > + devm_kfree(dev, win->res); > + pci_free_resource_list(&port->resources); > + > + return err; > +} > + > +/** > + * xilinx_pcie_parse_dt - Parse Device tree > + * @port: PCIe port information > + * > + * Return: '0' on success and error value on failure > + */ > +static int xilinx_pcie_parse_dt(struct xilinx_pcie_port *port) > +{ > + struct device *dev = port->dev; > + struct device_node *node = dev->of_node; > + struct resource regs; > + const char *type; > + int err; > + > + type = of_get_property(node, "device_type", NULL); > + if (!type || strcmp(type, "pci")) { > + dev_err(dev, "invalid \"device_type\" %s\n", type); > + return -EINVAL; > + } > + > + err = of_address_to_resource(node, 0, ®s); > + if (err) { > + dev_err(dev, "missing \"reg\" property\n"); > + return err; > + } > + > + port->reg_base = devm_ioremap_resource(dev, ®s); > + if (IS_ERR(port->reg_base)) > + return PTR_ERR(port->reg_base); > + > + port->irq = irq_of_parse_and_map(node, 0); > + err = devm_request_irq(dev, port->irq, xilinx_pcie_intr_handler, > + IRQF_SHARED, "xilinx-pcie", port); > + if (err) { > + dev_err(dev, "unable to request irq %d\n", port->irq); > + return err; > + } > + > + return 0; > +} > + > +/** > + * xilinx_pcie_probe - Probe function > + * @pdev: Platform device pointer > + * > + * Return: '0' on success and error value on failure > + */ > +static int xilinx_pcie_probe(struct platform_device *pdev) > +{ > + struct xilinx_pcie_port *port; > + struct hw_pci hw; > + struct device *dev = &pdev->dev; > + int err; > + > + if (!dev->of_node) > + return -ENODEV; > + > + port = devm_kzalloc(dev, sizeof(*port), GFP_KERNEL); > + if (!port) > + return -ENOMEM; > + > + port->dev = dev; > + > + err = xilinx_pcie_parse_dt(port); > + if (err) { > + dev_err(dev, "Parsing DT failed\n"); > + return err; > + } > + > + xilinx_pcie_init_port(port); > + > + err = xilinx_pcie_init_irq_domain(port); > + if (err) { > + dev_err(dev, "Failed creating IRQ Domain\n"); > + return err; > + } > + > + /* > + * Parse PCI ranges, configuration bus range and > + * request their resources > + */ > + INIT_LIST_HEAD(&port->resources); > + err = xilinx_pcie_parse_and_add_res(port); > + if (err) { > + dev_err(dev, "Failed adding resources\n"); > + return err; > + } > + > + platform_set_drvdata(pdev, port); > + > + /* Register the device */ > + memset(&hw, 0, sizeof(hw)); > + hw = (struct hw_pci) { > + .nr_controllers = 1, > + .private_data = (void **)&port, > + .setup = xilinx_pcie_setup, > + .map_irq = of_irq_parse_and_map_pci, > + .add_bus = xilinx_pcie_add_bus, > + .scan = xilinx_pcie_scan_bus, > + .ops = &xilinx_pcie_ops, > + }; > + pci_common_init_dev(dev, &hw); > + > + return 0; > +} > + > +/** > + * xilinx_pcie_remove - Remove function > + * @pdev: Platform device pointer > + * > + * Return: '0' always > + */ > +static int xilinx_pcie_remove(struct platform_device *pdev) > +{ > + struct xilinx_pcie_port *port = platform_get_drvdata(pdev); > + > + xilinx_pcie_free_irq_domain(port); > + > + return 0; > +} > + > +static struct of_device_id xilinx_pcie_of_match[] = { > + { .compatible = "xlnx,axi-pcie-host-1.00.a", }, > + {} > +}; > + > +static struct platform_driver xilinx_pcie_driver = { > + .driver = { > + .name = "xilinx-pcie", > + .owner = THIS_MODULE, > + .of_match_table = xilinx_pcie_of_match, > + .suppress_bind_attrs = true, > + }, > + .probe = xilinx_pcie_probe, > + .remove = xilinx_pcie_remove, > +}; > +module_platform_driver(xilinx_pcie_driver); > + > +MODULE_AUTHOR("Xilinx Inc"); > +MODULE_DESCRIPTION("Xilinx AXI PCIe driver"); > +MODULE_LICENSE("GPL v2"); > -- > 1.7.9.5 > -- To unsubscribe from this list: send the line "unsubscribe linux-pci" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Wed, Sep 3, 2014 at 11:35 PM, Bjorn Helgaas <bhelgaas@google.com> wrote: > On Wed, Aug 20, 2014 at 09:56:02PM +0530, Srikanth Thokala wrote: >> This is the driver for Xilinx AXI PCIe Host Bridge Soft IP >> >> Signed-off-by: Srikanth Thokala <sthokal@xilinx.com> >> Acked-by: Arnd Bergmann <arnd@arndb.de> > > Applied to pci/host-xilinx for v3.18, thanks! Thanks Bjorn! Srikanth > >> --- >> Changes in v7: >> - Removed errors reported from build-bot. The errors are >> mainly due to same CONFIG_PCI_XILINX flag being used for >> Zynq and Microblaze platforms. So, renamed the driver >> config flag name to CONFIG_PCIE_XILINX. >> - Also, renamed the driver file to pcie-xilinx.c to be in >> sync with CONFIG option. >> - Fixed the annotation of xilinx_pcie_scan_bus() function >> to remove build-bot warnings. >> >> Changes in v6: >> - Added Ack from Arnd. Thanks Arnd. >> - Rebased on 3.16-rc7. >> >> Changes in v5: >> - Removed unnecessary checking of port structure. >> - Changed the return type of verify_config from int to bool. >> - Renamed following functions, >> xilinx_pcie_is_link_up() -> xilinx_pcie_link_is_up() >> xilinx_pcie_verify_config() -> xilinx_pcie_valid_device() >> xilinx_pcie_get_config_base() -> xilinx_pcie_config_base() >> - Removed link_up bool flag from port structure, as it is not >> being used. >> - Removed unused constants. >> - Rebased on 3.16-rc6. >> - Fixed some minor comments. >> - Thanks Bjorn for the review. >> >> Changes in v4: >> - Regarding the comments to separate ECAM functionality, >> I have sent a separate patch and it is decided to implement >> it later. The patch is here, >> https://lkml.org/lkml/2014/5/18/54 >> - Fixed issue with adding configuration bus resource. >> - Moved the logic for setting up bus resources to probe() from >> pcie_setup(). >> - Instead of mapping all the MSI interrupts in the probe, changed >> to map only when a MSI is requested. >> - Earlier, the implementation of legacy and MSI interrupts init- >> is mutually exclusive, now changed to have the legacy interrupts >> init always and MSI interrupt init based on CONFIG_PCI_MSI flag. >> - Regarding the MSI generic implementation comment, I will plan to >> do on top of this driver patch. >> - Rebased on 3.16-rc2. >> - Fixed other minor comments. >> - Thanks Arnd and Bjorn for the review. >> >> Changes in v3: >> - Rebased on v3.15.0-rc1 >> - Added support for interrupt-map DT functionality. >> - Removed map_irq() wrapper, instead using of_irq_parse_and_map_pci(). >> - Modified resource mapping logic as per the series >> "PCI: ARM: add support for generic PCI host controller" >> - Modified devicetree binding documentation to update with interrupt- >> map properties. >> - Use devm calls wherever applicable. >> - Fixed minor comments from Jason >> - Thanks Jason for the review and suggestions. >> >> Changes in v2: >> - Rebased on v3.14.0-rc8 >> - Removed IP specific DT properties like include-rc, axibar-num etc., >> as suggested by Jason and Bjorn, Thanks >> --- >> .../devicetree/bindings/pci/xilinx-pcie.txt | 62 ++ >> drivers/pci/host/Kconfig | 7 + >> drivers/pci/host/Makefile | 1 + >> drivers/pci/host/pcie-xilinx.c | 978 ++++++++++++++++++++ >> 4 files changed, 1048 insertions(+) >> create mode 100644 Documentation/devicetree/bindings/pci/xilinx-pcie.txt >> create mode 100644 drivers/pci/host/pcie-xilinx.c >> >> diff --git a/Documentation/devicetree/bindings/pci/xilinx-pcie.txt b/Documentation/devicetree/bindings/pci/xilinx-pcie.txt >> new file mode 100644 >> index 0000000..3e2c88d >> --- /dev/null >> +++ b/Documentation/devicetree/bindings/pci/xilinx-pcie.txt >> @@ -0,0 +1,62 @@ >> +* Xilinx AXI PCIe Root Port Bridge DT description >> + >> +Required properties: >> +- #address-cells: Address representation for root ports, set to <3> >> +- #size-cells: Size representation for root ports, set to <2> >> +- #interrupt-cells: specifies the number of cells needed to encode an >> + interrupt source. The value must be 1. >> +- compatible: Should contain "xlnx,axi-pcie-host-1.00.a" >> +- reg: Should contain AXI PCIe registers location and length >> +- device_type: must be "pci" >> +- interrupts: Should contain AXI PCIe interrupt >> +- interrupt-map-mask, >> + interrupt-map: standard PCI properties to define the mapping of the >> + PCI interface to interrupt numbers. >> +- ranges: ranges for the PCI memory regions (I/O space region is not >> + supported by hardware) >> + Please refer to the standard PCI bus binding document for a more >> + detailed explanation >> + >> +Optional properties: >> +- bus-range: PCI bus numbers covered >> + >> +Interrupt controller child node >> ++++++++++++++++++++++++++++++++ >> +Required properties: >> +- interrupt-controller: identifies the node as an interrupt controller >> +- #address-cells: specifies the number of cells needed to encode an >> + address. The value must be 0. >> +- #interrupt-cells: specifies the number of cells needed to encode an >> + interrupt source. The value must be 1. >> + >> +NOTE: >> +The core provides a single interrupt for both INTx/MSI messages. So, >> +created a interrupt controller node to support 'interrupt-map' DT >> +functionality. The driver will create an IRQ domain for this map, decode >> +the four INTx interrupts in ISR and route them to this domain. >> + >> + >> +Example: >> +++++++++ >> + >> + pci_express: axi-pcie@50000000 { >> + #address-cells = <3>; >> + #size-cells = <2>; >> + #interrupt-cells = <1>; >> + compatible = "xlnx,axi-pcie-host-1.00.a"; >> + reg = < 0x50000000 0x10000000 >; >> + device_type = "pci"; >> + interrupts = < 0 52 4 >; >> + interrupt-map-mask = <0 0 0 7>; >> + interrupt-map = <0 0 0 1 &pcie_intc 1>, >> + <0 0 0 2 &pcie_intc 2>, >> + <0 0 0 3 &pcie_intc 3>, >> + <0 0 0 4 &pcie_intc 4>; >> + ranges = < 0x02000000 0 0x60000000 0x60000000 0 0x10000000 >; >> + >> + pcie_intc: interrupt-controller { >> + interrupt-controller; >> + #address-cells = <0>; >> + #interrupt-cells = <1>; >> + } >> + }; >> diff --git a/drivers/pci/host/Kconfig b/drivers/pci/host/Kconfig >> index 21df477..255a9fa 100644 >> --- a/drivers/pci/host/Kconfig >> +++ b/drivers/pci/host/Kconfig >> @@ -46,4 +46,11 @@ config PCI_HOST_GENERIC >> Say Y here if you want to support a simple generic PCI host >> controller, such as the one emulated by kvmtool. >> >> +config PCIE_XILINX >> + bool "Xilinx AXI PCIe host bridge support" >> + depends on ARCH_ZYNQ >> + help >> + Say 'Y' here if you want kernel to support the Xilinx AXI PCIe >> + Host Bridge driver. >> + >> endmenu >> diff --git a/drivers/pci/host/Makefile b/drivers/pci/host/Makefile >> index 611ba4b..339595c 100644 >> --- a/drivers/pci/host/Makefile >> +++ b/drivers/pci/host/Makefile >> @@ -6,3 +6,4 @@ obj-$(CONFIG_PCI_TEGRA) += pci-tegra.o >> obj-$(CONFIG_PCI_RCAR_GEN2) += pci-rcar-gen2.o >> obj-$(CONFIG_PCI_RCAR_GEN2_PCIE) += pcie-rcar.o >> obj-$(CONFIG_PCI_HOST_GENERIC) += pci-host-generic.o >> +obj-$(CONFIG_PCIE_XILINX) += pcie-xilinx.o >> diff --git a/drivers/pci/host/pcie-xilinx.c b/drivers/pci/host/pcie-xilinx.c >> new file mode 100644 >> index 0000000..32c5ded >> --- /dev/null >> +++ b/drivers/pci/host/pcie-xilinx.c >> @@ -0,0 +1,978 @@ >> +/* >> + * PCIe host controller driver for Xilinx AXI PCIe Bridge >> + * >> + * Copyright (c) 2012 - 2014 Xilinx, Inc. >> + * >> + * Based on the Tegra PCIe driver >> + * >> + * Bits taken from Synopsys Designware Host controller driver and >> + * ARM PCI Host generic driver. >> + * >> + * This program is free software: you can redistribute it and/or modify >> + * it under the terms of the GNU General Public License as published by >> + * the Free Software Foundation, either version 2 of the License, or >> + * (at your option) any later version. >> + */ >> + >> +#include <linux/interrupt.h> >> +#include <linux/irq.h> >> +#include <linux/irqdomain.h> >> +#include <linux/kernel.h> >> +#include <linux/module.h> >> +#include <linux/msi.h> >> +#include <linux/of_address.h> >> +#include <linux/of_pci.h> >> +#include <linux/of_platform.h> >> +#include <linux/of_irq.h> >> +#include <linux/pci.h> >> +#include <linux/platform_device.h> >> + >> +/* Register definitions */ >> +#define XILINX_PCIE_REG_BIR 0x00000130 >> +#define XILINX_PCIE_REG_IDR 0x00000138 >> +#define XILINX_PCIE_REG_IMR 0x0000013c >> +#define XILINX_PCIE_REG_PSCR 0x00000144 >> +#define XILINX_PCIE_REG_RPSC 0x00000148 >> +#define XILINX_PCIE_REG_MSIBASE1 0x0000014c >> +#define XILINX_PCIE_REG_MSIBASE2 0x00000150 >> +#define XILINX_PCIE_REG_RPEFR 0x00000154 >> +#define XILINX_PCIE_REG_RPIFR1 0x00000158 >> +#define XILINX_PCIE_REG_RPIFR2 0x0000015c >> + >> +/* Interrupt registers definitions */ >> +#define XILINX_PCIE_INTR_LINK_DOWN BIT(0) >> +#define XILINX_PCIE_INTR_ECRC_ERR BIT(1) >> +#define XILINX_PCIE_INTR_STR_ERR BIT(2) >> +#define XILINX_PCIE_INTR_HOT_RESET BIT(3) >> +#define XILINX_PCIE_INTR_CFG_TIMEOUT BIT(8) >> +#define XILINX_PCIE_INTR_CORRECTABLE BIT(9) >> +#define XILINX_PCIE_INTR_NONFATAL BIT(10) >> +#define XILINX_PCIE_INTR_FATAL BIT(11) >> +#define XILINX_PCIE_INTR_INTX BIT(16) >> +#define XILINX_PCIE_INTR_MSI BIT(17) >> +#define XILINX_PCIE_INTR_SLV_UNSUPP BIT(20) >> +#define XILINX_PCIE_INTR_SLV_UNEXP BIT(21) >> +#define XILINX_PCIE_INTR_SLV_COMPL BIT(22) >> +#define XILINX_PCIE_INTR_SLV_ERRP BIT(23) >> +#define XILINX_PCIE_INTR_SLV_CMPABT BIT(24) >> +#define XILINX_PCIE_INTR_SLV_ILLBUR BIT(25) >> +#define XILINX_PCIE_INTR_MST_DECERR BIT(26) >> +#define XILINX_PCIE_INTR_MST_SLVERR BIT(27) >> +#define XILINX_PCIE_INTR_MST_ERRP BIT(28) >> +#define XILINX_PCIE_IMR_ALL_MASK 0x1FF30FED >> +#define XILINX_PCIE_IDR_ALL_MASK 0xFFFFFFFF >> + >> +/* Root Port Error FIFO Read Register definitions */ >> +#define XILINX_PCIE_RPEFR_ERR_VALID BIT(18) >> +#define XILINX_PCIE_RPEFR_REQ_ID GENMASK(15, 0) >> +#define XILINX_PCIE_RPEFR_ALL_MASK 0xFFFFFFFF >> + >> +/* Root Port Interrupt FIFO Read Register 1 definitions */ >> +#define XILINX_PCIE_RPIFR1_INTR_VALID BIT(31) >> +#define XILINX_PCIE_RPIFR1_MSI_INTR BIT(30) >> +#define XILINX_PCIE_RPIFR1_INTR_MASK GENMASK(28, 27) >> +#define XILINX_PCIE_RPIFR1_ALL_MASK 0xFFFFFFFF >> +#define XILINX_PCIE_RPIFR1_INTR_SHIFT 27 >> + >> +/* Bridge Info Register definitions */ >> +#define XILINX_PCIE_BIR_ECAM_SZ_MASK GENMASK(18, 16) >> +#define XILINX_PCIE_BIR_ECAM_SZ_SHIFT 16 >> + >> +/* Root Port Interrupt FIFO Read Register 2 definitions */ >> +#define XILINX_PCIE_RPIFR2_MSG_DATA GENMASK(15, 0) >> + >> +/* Root Port Status/control Register definitions */ >> +#define XILINX_PCIE_REG_RPSC_BEN BIT(0) >> + >> +/* Phy Status/Control Register definitions */ >> +#define XILINX_PCIE_REG_PSCR_LNKUP BIT(11) >> + >> +/* ECAM definitions */ >> +#define ECAM_BUS_NUM_SHIFT 20 >> +#define ECAM_DEV_NUM_SHIFT 12 >> + >> +/* Number of MSI IRQs */ >> +#define XILINX_NUM_MSI_IRQS 128 >> + >> +/* Number of Memory Resources */ >> +#define XILINX_MAX_NUM_RESOURCES 3 >> + >> +/** >> + * struct xilinx_pcie_port - PCIe port information >> + * @reg_base: IO Mapped Register Base >> + * @irq: Interrupt number >> + * @msi_pages: MSI pages >> + * @root_busno: Root Bus number >> + * @dev: Device pointer >> + * @irq_domain: IRQ domain pointer >> + * @bus_range: Bus range >> + * @resources: Bus Resources >> + */ >> +struct xilinx_pcie_port { >> + void __iomem *reg_base; >> + u32 irq; >> + unsigned long msi_pages; >> + u8 root_busno; >> + struct device *dev; >> + struct irq_domain *irq_domain; >> + struct resource bus_range; >> + struct list_head resources; >> +}; >> + >> +static DECLARE_BITMAP(msi_irq_in_use, XILINX_NUM_MSI_IRQS); >> + >> +static inline struct xilinx_pcie_port *sys_to_pcie(struct pci_sys_data *sys) >> +{ >> + return sys->private_data; >> +} >> + >> +static inline u32 pcie_read(struct xilinx_pcie_port *port, u32 reg) >> +{ >> + return readl(port->reg_base + reg); >> +} >> + >> +static inline void pcie_write(struct xilinx_pcie_port *port, >> + u32 val, u32 reg) >> +{ >> + writel(val, port->reg_base + reg); >> +} >> + >> +static inline bool xilinx_pcie_link_is_up(struct xilinx_pcie_port *port) >> +{ >> + return (pcie_read(port, XILINX_PCIE_REG_PSCR) & >> + XILINX_PCIE_REG_PSCR_LNKUP) ? 1 : 0; >> +} >> + >> +/** >> + * xilinx_pcie_clear_err_interrupts - Clear Error Interrupts >> + * @port: PCIe port information >> + */ >> +static void xilinx_pcie_clear_err_interrupts(struct xilinx_pcie_port *port) >> +{ >> + u32 val = pcie_read(port, XILINX_PCIE_REG_RPEFR); >> + >> + if (val & XILINX_PCIE_RPEFR_ERR_VALID) { >> + dev_dbg(port->dev, "Requester ID %d\n", >> + val & XILINX_PCIE_RPEFR_REQ_ID); >> + pcie_write(port, XILINX_PCIE_RPEFR_ALL_MASK, >> + XILINX_PCIE_REG_RPEFR); >> + } >> +} >> + >> +/** >> + * xilinx_pcie_valid_device - Check if a valid device is present on bus >> + * @bus: PCI Bus structure >> + * @devfn: device/function >> + * >> + * Return: 'true' on success and 'false' if invalid device is found >> + */ >> +static bool xilinx_pcie_valid_device(struct pci_bus *bus, >> + unsigned int devfn) >> +{ >> + struct xilinx_pcie_port *port = sys_to_pcie(bus->sysdata); >> + >> + /* Check if link is up when trying to access downstream ports */ >> + if (bus->number != port->root_busno) >> + if (!xilinx_pcie_link_is_up(port)) >> + return false; >> + >> + /* Only one device down on each root port */ >> + if (bus->number == port->root_busno && devfn > 0) >> + return false; >> + >> + /* >> + * Do not read more than one device on the bus directly attached >> + * to RC. >> + */ >> + if (bus->primary == port->root_busno && devfn > 0) >> + return false; >> + >> + return true; >> +} >> + >> +/** >> + * xilinx_pcie_config_base - Get configuration base >> + * @bus: PCI Bus structure >> + * @devfn: Device/function >> + * @where: Offset from base >> + * >> + * Return: Base address of the configuration space needed to be >> + * accessed. >> + */ >> +static void __iomem *xilinx_pcie_config_base(struct pci_bus *bus, >> + unsigned int devfn, >> + int where) >> +{ >> + struct xilinx_pcie_port *port = sys_to_pcie(bus->sysdata); >> + int relbus; >> + >> + relbus = (bus->number << ECAM_BUS_NUM_SHIFT) | >> + (devfn << ECAM_DEV_NUM_SHIFT); >> + >> + return port->reg_base + relbus + where; >> +} >> + >> +/** >> + * xilinx_pcie_read_config - Read configuration space >> + * @bus: PCI Bus structure >> + * @devfn: Device/function >> + * @where: Offset from base >> + * @size: Byte/word/dword >> + * @val: Value to be read >> + * >> + * Return: PCIBIOS_SUCCESSFUL on success >> + * EINVAL/PCIBIOS_DEVICE_NOT_FOUND/PCIBIOS_BAD_REGISTER_NUMBER >> + * on failure. >> + */ >> +static int xilinx_pcie_read_config(struct pci_bus *bus, >> + unsigned int devfn, int where, >> + int size, u32 *val) >> +{ >> + void __iomem *addr; >> + >> + if (!xilinx_pcie_valid_device(bus, devfn)) { >> + *val = 0xFFFFFFFF; >> + return PCIBIOS_DEVICE_NOT_FOUND; >> + } >> + >> + addr = xilinx_pcie_config_base(bus, devfn, where); >> + >> + switch (size) { >> + case 1: >> + *val = readb(addr); >> + break; >> + case 2: >> + *val = readw(addr); >> + break; >> + default: >> + *val = readl(addr); >> + break; >> + } >> + >> + return PCIBIOS_SUCCESSFUL; >> +} >> + >> +/** >> + * xilinx_pcie_write_config - Write configuration space >> + * @bus: PCI Bus structure >> + * @devfn: Device/function >> + * @where: Offset from base >> + * @size: Byte/word/dword >> + * @val: Value to be written to device >> + * >> + * Return: PCIBIOS_SUCCESSFUL on success, >> + * EINVAL/PCIBIOS_DEVICE_NOT_FOUND/PCIBIOS_BAD_REGISTER_NUMBER >> + * on failure. >> + */ >> +static int xilinx_pcie_write_config(struct pci_bus *bus, >> + unsigned int devfn, int where, >> + int size, u32 val) >> +{ >> + void __iomem *addr; >> + >> + if (!xilinx_pcie_valid_device(bus, devfn)) >> + return PCIBIOS_DEVICE_NOT_FOUND; >> + >> + addr = xilinx_pcie_config_base(bus, devfn, where); >> + >> + switch (size) { >> + case 1: >> + writeb(val, addr); >> + break; >> + case 2: >> + writew(val, addr); >> + break; >> + default: >> + writel(val, addr); >> + break; >> + } >> + >> + return PCIBIOS_SUCCESSFUL; >> +} >> + >> +/* PCIe operations */ >> +static struct pci_ops xilinx_pcie_ops = { >> + .read = xilinx_pcie_read_config, >> + .write = xilinx_pcie_write_config, >> +}; >> + >> +/* MSI functions */ >> + >> +/** >> + * xilinx_pcie_destroy_msi - Free MSI number >> + * @irq: IRQ to be freed >> + */ >> +static void xilinx_pcie_destroy_msi(unsigned int irq) >> +{ >> + struct irq_desc *desc; >> + struct msi_desc *msi; >> + struct xilinx_pcie_port *port; >> + >> + desc = irq_to_desc(irq); >> + msi = irq_desc_get_msi_desc(desc); >> + port = sys_to_pcie(msi->dev->bus->sysdata); >> + >> + if (!test_bit(irq, msi_irq_in_use)) >> + dev_err(port->dev, "Trying to free unused MSI#%d\n", irq); >> + else >> + clear_bit(irq, msi_irq_in_use); >> +} >> + >> +/** >> + * xilinx_pcie_assign_msi - Allocate MSI number >> + * @port: PCIe port structure >> + * >> + * Return: A valid IRQ on success and error value on failure. >> + */ >> +static int xilinx_pcie_assign_msi(struct xilinx_pcie_port *port) >> +{ >> + int pos; >> + >> + pos = find_first_zero_bit(msi_irq_in_use, XILINX_NUM_MSI_IRQS); >> + if (pos < XILINX_NUM_MSI_IRQS) >> + set_bit(pos, msi_irq_in_use); >> + else >> + return -ENOSPC; >> + >> + return pos; >> +} >> + >> +/** >> + * xilinx_msi_teardown_irq - Destroy the MSI >> + * @chip: MSI Chip descriptor >> + * @irq: MSI IRQ to destroy >> + */ >> +static void xilinx_msi_teardown_irq(struct msi_chip *chip, unsigned int irq) >> +{ >> + xilinx_pcie_destroy_msi(irq); >> +} >> + >> +/** >> + * xilinx_pcie_msi_setup_irq - Setup MSI request >> + * @chip: MSI chip pointer >> + * @pdev: PCIe device pointer >> + * @desc: MSI descriptor pointer >> + * >> + * Return: '0' on success and error value on failure >> + */ >> +static int xilinx_pcie_msi_setup_irq(struct msi_chip *chip, >> + struct pci_dev *pdev, >> + struct msi_desc *desc) >> +{ >> + struct xilinx_pcie_port *port = sys_to_pcie(pdev->bus->sysdata); >> + unsigned int irq; >> + int hwirq; >> + struct msi_msg msg; >> + phys_addr_t msg_addr; >> + >> + hwirq = xilinx_pcie_assign_msi(port); >> + if (irq < 0) >> + return irq; >> + >> + irq = irq_create_mapping(port->irq_domain, hwirq); >> + if (!irq) >> + return -EINVAL; >> + >> + irq_set_msi_desc(irq, desc); >> + >> + msg_addr = virt_to_phys((void *)port->msi_pages); >> + >> + msg.address_hi = 0; >> + msg.address_lo = msg_addr; >> + msg.data = irq; >> + >> + write_msi_msg(irq, &msg); >> + >> + return 0; >> +} >> + >> +/* MSI Chip Descriptor */ >> +static struct msi_chip xilinx_pcie_msi_chip = { >> + .setup_irq = xilinx_pcie_msi_setup_irq, >> + .teardown_irq = xilinx_msi_teardown_irq, >> +}; >> + >> +/* HW Interrupt Chip Descriptor */ >> +static struct irq_chip xilinx_msi_irq_chip = { >> + .name = "Xilinx PCIe MSI", >> + .irq_enable = unmask_msi_irq, >> + .irq_disable = mask_msi_irq, >> + .irq_mask = mask_msi_irq, >> + .irq_unmask = unmask_msi_irq, >> +}; >> + >> +/** >> + * xilinx_pcie_msi_map - Set the handler for the MSI and mark IRQ as valid >> + * @domain: IRQ domain >> + * @irq: Virtual IRQ number >> + * @hwirq: HW interrupt number >> + * >> + * Return: Always returns 0. >> + */ >> +static int xilinx_pcie_msi_map(struct irq_domain *domain, unsigned int irq, >> + irq_hw_number_t hwirq) >> +{ >> + irq_set_chip_and_handler(irq, &xilinx_msi_irq_chip, handle_simple_irq); >> + irq_set_chip_data(irq, domain->host_data); >> + set_irq_flags(irq, IRQF_VALID); >> + >> + return 0; >> +} >> + >> +/* IRQ Domain operations */ >> +static const struct irq_domain_ops msi_domain_ops = { >> + .map = xilinx_pcie_msi_map, >> +}; >> + >> +/** >> + * xilinx_pcie_enable_msi - Enable MSI support >> + * @port: PCIe port information >> + */ >> +static void xilinx_pcie_enable_msi(struct xilinx_pcie_port *port) >> +{ >> + phys_addr_t msg_addr; >> + >> + port->msi_pages = __get_free_pages(GFP_KERNEL, 0); >> + msg_addr = virt_to_phys((void *)port->msi_pages); >> + pcie_write(port, 0x0, XILINX_PCIE_REG_MSIBASE1); >> + pcie_write(port, msg_addr, XILINX_PCIE_REG_MSIBASE2); >> +} >> + >> +/** >> + * xilinx_pcie_add_bus - Add MSI chip info to PCIe bus >> + * @bus: PCIe bus >> + */ >> +static void xilinx_pcie_add_bus(struct pci_bus *bus) >> +{ >> + if (IS_ENABLED(CONFIG_PCI_MSI)) { >> + struct xilinx_pcie_port *port = sys_to_pcie(bus->sysdata); >> + >> + xilinx_pcie_msi_chip.dev = port->dev; >> + bus->msi = &xilinx_pcie_msi_chip; >> + } >> +} >> + >> +/* INTx Functions */ >> + >> +/** >> + * xilinx_pcie_intx_map - Set the handler for the INTx and mark IRQ as valid >> + * @domain: IRQ domain >> + * @irq: Virtual IRQ number >> + * @hwirq: HW interrupt number >> + * >> + * Return: Always returns 0. >> + */ >> +static int xilinx_pcie_intx_map(struct irq_domain *domain, unsigned int irq, >> + irq_hw_number_t hwirq) >> +{ >> + irq_set_chip_and_handler(irq, &dummy_irq_chip, handle_simple_irq); >> + irq_set_chip_data(irq, domain->host_data); >> + set_irq_flags(irq, IRQF_VALID); >> + >> + return 0; >> +} >> + >> +/* INTx IRQ Domain operations */ >> +static const struct irq_domain_ops intx_domain_ops = { >> + .map = xilinx_pcie_intx_map, >> +}; >> + >> +/* PCIe HW Functions */ >> + >> +/** >> + * xilinx_pcie_intr_handler - Interrupt Service Handler >> + * @irq: IRQ number >> + * @data: PCIe port information >> + * >> + * Return: IRQ_HANDLED on success and IRQ_NONE on failure >> + */ >> +static irqreturn_t xilinx_pcie_intr_handler(int irq, void *data) >> +{ >> + struct xilinx_pcie_port *port = (struct xilinx_pcie_port *)data; >> + u32 val, mask, status, msi_data; >> + >> + /* Read interrupt decode and mask registers */ >> + val = pcie_read(port, XILINX_PCIE_REG_IDR); >> + mask = pcie_read(port, XILINX_PCIE_REG_IMR); >> + >> + status = val & mask; >> + if (!status) >> + return IRQ_NONE; >> + >> + if (status & XILINX_PCIE_INTR_LINK_DOWN) >> + dev_warn(port->dev, "Link Down\n"); >> + >> + if (status & XILINX_PCIE_INTR_ECRC_ERR) >> + dev_warn(port->dev, "ECRC failed\n"); >> + >> + if (status & XILINX_PCIE_INTR_STR_ERR) >> + dev_warn(port->dev, "Streaming error\n"); >> + >> + if (status & XILINX_PCIE_INTR_HOT_RESET) >> + dev_info(port->dev, "Hot reset\n"); >> + >> + if (status & XILINX_PCIE_INTR_CFG_TIMEOUT) >> + dev_warn(port->dev, "ECAM access timeout\n"); >> + >> + if (status & XILINX_PCIE_INTR_CORRECTABLE) { >> + dev_warn(port->dev, "Correctable error message\n"); >> + xilinx_pcie_clear_err_interrupts(port); >> + } >> + >> + if (status & XILINX_PCIE_INTR_NONFATAL) { >> + dev_warn(port->dev, "Non fatal error message\n"); >> + xilinx_pcie_clear_err_interrupts(port); >> + } >> + >> + if (status & XILINX_PCIE_INTR_FATAL) { >> + dev_warn(port->dev, "Fatal error message\n"); >> + xilinx_pcie_clear_err_interrupts(port); >> + } >> + >> + if (status & XILINX_PCIE_INTR_INTX) { >> + /* INTx interrupt received */ >> + val = pcie_read(port, XILINX_PCIE_REG_RPIFR1); >> + >> + /* Check whether interrupt valid */ >> + if (!(val & XILINX_PCIE_RPIFR1_INTR_VALID)) { >> + dev_warn(port->dev, "RP Intr FIFO1 read error\n"); >> + return IRQ_HANDLED; >> + } >> + >> + /* Clear interrupt FIFO register 1 */ >> + pcie_write(port, XILINX_PCIE_RPIFR1_ALL_MASK, >> + XILINX_PCIE_REG_RPIFR1); >> + >> + /* Handle INTx Interrupt */ >> + val = ((val & XILINX_PCIE_RPIFR1_INTR_MASK) >> >> + XILINX_PCIE_RPIFR1_INTR_SHIFT) + 1; >> + generic_handle_irq(irq_find_mapping(port->irq_domain, val)); >> + } >> + >> + if (status & XILINX_PCIE_INTR_MSI) { >> + /* MSI Interrupt */ >> + val = pcie_read(port, XILINX_PCIE_REG_RPIFR1); >> + >> + if (!(val & XILINX_PCIE_RPIFR1_INTR_VALID)) { >> + dev_warn(port->dev, "RP Intr FIFO1 read error\n"); >> + return IRQ_HANDLED; >> + } >> + >> + if (val & XILINX_PCIE_RPIFR1_MSI_INTR) { >> + msi_data = pcie_read(port, XILINX_PCIE_REG_RPIFR2) & >> + XILINX_PCIE_RPIFR2_MSG_DATA; >> + >> + /* Clear interrupt FIFO register 1 */ >> + pcie_write(port, XILINX_PCIE_RPIFR1_ALL_MASK, >> + XILINX_PCIE_REG_RPIFR1); >> + >> + if (IS_ENABLED(CONFIG_PCI_MSI)) { >> + /* Handle MSI Interrupt */ >> + generic_handle_irq(msi_data); >> + } >> + } >> + } >> + >> + if (status & XILINX_PCIE_INTR_SLV_UNSUPP) >> + dev_warn(port->dev, "Slave unsupported request\n"); >> + >> + if (status & XILINX_PCIE_INTR_SLV_UNEXP) >> + dev_warn(port->dev, "Slave unexpected completion\n"); >> + >> + if (status & XILINX_PCIE_INTR_SLV_COMPL) >> + dev_warn(port->dev, "Slave completion timeout\n"); >> + >> + if (status & XILINX_PCIE_INTR_SLV_ERRP) >> + dev_warn(port->dev, "Slave Error Poison\n"); >> + >> + if (status & XILINX_PCIE_INTR_SLV_CMPABT) >> + dev_warn(port->dev, "Slave Completer Abort\n"); >> + >> + if (status & XILINX_PCIE_INTR_SLV_ILLBUR) >> + dev_warn(port->dev, "Slave Illegal Burst\n"); >> + >> + if (status & XILINX_PCIE_INTR_MST_DECERR) >> + dev_warn(port->dev, "Master decode error\n"); >> + >> + if (status & XILINX_PCIE_INTR_MST_SLVERR) >> + dev_warn(port->dev, "Master slave error\n"); >> + >> + if (status & XILINX_PCIE_INTR_MST_ERRP) >> + dev_warn(port->dev, "Master error poison\n"); >> + >> + /* Clear the Interrupt Decode register */ >> + pcie_write(port, status, XILINX_PCIE_REG_IDR); >> + >> + return IRQ_HANDLED; >> +} >> + >> +/** >> + * xilinx_pcie_free_irq_domain - Free IRQ domain >> + * @port: PCIe port information >> + */ >> +static void xilinx_pcie_free_irq_domain(struct xilinx_pcie_port *port) >> +{ >> + int i; >> + u32 irq, num_irqs; >> + >> + /* Free IRQ Domain */ >> + if (IS_ENABLED(CONFIG_PCI_MSI)) { >> + >> + free_pages(port->msi_pages, 0); >> + >> + num_irqs = XILINX_NUM_MSI_IRQS; >> + } else { >> + /* INTx */ >> + num_irqs = 4; >> + } >> + >> + for (i = 0; i < num_irqs; i++) { >> + irq = irq_find_mapping(port->irq_domain, i); >> + if (irq > 0) >> + irq_dispose_mapping(irq); >> + } >> + >> + irq_domain_remove(port->irq_domain); >> +} >> + >> +/** >> + * xilinx_pcie_init_irq_domain - Initialize IRQ domain >> + * @port: PCIe port information >> + * >> + * Return: '0' on success and error value on failure >> + */ >> +static int xilinx_pcie_init_irq_domain(struct xilinx_pcie_port *port) >> +{ >> + struct device *dev = port->dev; >> + struct device_node *node = dev->of_node; >> + struct device_node *pcie_intc_node; >> + >> + /* Setup INTx */ >> + pcie_intc_node = of_get_next_child(node, NULL); >> + if (!pcie_intc_node) { >> + dev_err(dev, "No PCIe Intc node found\n"); >> + return PTR_ERR(pcie_intc_node); >> + } >> + >> + port->irq_domain = irq_domain_add_linear(pcie_intc_node, 4, >> + &intx_domain_ops, >> + port); >> + if (!port->irq_domain) { >> + dev_err(dev, "Failed to get a INTx IRQ domain\n"); >> + return PTR_ERR(port->irq_domain); >> + } >> + >> + /* Setup MSI */ >> + if (IS_ENABLED(CONFIG_PCI_MSI)) { >> + port->irq_domain = irq_domain_add_linear(node, >> + XILINX_NUM_MSI_IRQS, >> + &msi_domain_ops, >> + &xilinx_pcie_msi_chip); >> + if (!port->irq_domain) { >> + dev_err(dev, "Failed to get a MSI IRQ domain\n"); >> + return PTR_ERR(port->irq_domain); >> + } >> + >> + xilinx_pcie_enable_msi(port); >> + } >> + >> + return 0; >> +} >> + >> +/** >> + * xilinx_pcie_init_port - Initialize hardware >> + * @port: PCIe port information >> + */ >> +static void xilinx_pcie_init_port(struct xilinx_pcie_port *port) >> +{ >> + if (xilinx_pcie_link_is_up(port)) >> + dev_info(port->dev, "PCIe Link is UP\n"); >> + else >> + dev_info(port->dev, "PCIe Link is DOWN\n"); >> + >> + /* Disable all interrupts */ >> + pcie_write(port, ~XILINX_PCIE_IDR_ALL_MASK, >> + XILINX_PCIE_REG_IMR); >> + >> + /* Clear pending interrupts */ >> + pcie_write(port, pcie_read(port, XILINX_PCIE_REG_IDR) & >> + XILINX_PCIE_IMR_ALL_MASK, >> + XILINX_PCIE_REG_IDR); >> + >> + /* Enable all interrupts */ >> + pcie_write(port, XILINX_PCIE_IMR_ALL_MASK, XILINX_PCIE_REG_IMR); >> + >> + /* Enable the Bridge enable bit */ >> + pcie_write(port, pcie_read(port, XILINX_PCIE_REG_RPSC) | >> + XILINX_PCIE_REG_RPSC_BEN, >> + XILINX_PCIE_REG_RPSC); >> +} >> + >> +/** >> + * xilinx_pcie_setup - Setup memory resources >> + * @nr: Bus number >> + * @sys: Per controller structure >> + * >> + * Return: '1' on success and error value on failure >> + */ >> +static int xilinx_pcie_setup(int nr, struct pci_sys_data *sys) >> +{ >> + struct xilinx_pcie_port *port = sys_to_pcie(sys); >> + >> + list_splice_init(&port->resources, &sys->resources); >> + >> + return 1; >> +} >> + >> +/** >> + * xilinx_pcie_scan_bus - Scan PCIe bus for devices >> + * @nr: Bus number >> + * @sys: Per controller structure >> + * >> + * Return: Valid Bus pointer on success and NULL on failure >> + */ >> +static struct pci_bus *xilinx_pcie_scan_bus(int nr, >> + struct pci_sys_data *sys) >> +{ >> + struct xilinx_pcie_port *port = sys_to_pcie(sys); >> + struct pci_bus *bus; >> + >> + port->root_busno = sys->busnr; >> + bus = pci_scan_root_bus(port->dev, sys->busnr, &xilinx_pcie_ops, >> + sys, &sys->resources); >> + >> + return bus; >> +} >> + >> +/** >> + * xilinx_pcie_parse_and_add_res - Add resources by parsing ranges >> + * @port: PCIe port information >> + * >> + * Return: '0' on success and error value on failure >> + */ >> +static int xilinx_pcie_parse_and_add_res(struct xilinx_pcie_port *port) >> +{ >> + struct device *dev = port->dev; >> + struct device_node *node = dev->of_node; >> + struct resource *mem; >> + resource_size_t offset; >> + struct of_pci_range_parser parser; >> + struct of_pci_range range; >> + struct pci_host_bridge_window *win; >> + int err = 0, mem_resno = 0; >> + >> + /* Get the ranges */ >> + if (of_pci_range_parser_init(&parser, node)) { >> + dev_err(dev, "missing \"ranges\" property\n"); >> + return -EINVAL; >> + } >> + >> + /* Parse the ranges and add the resources found to the list */ >> + for_each_of_pci_range(&parser, &range) { >> + >> + if (mem_resno >= XILINX_MAX_NUM_RESOURCES) { >> + dev_err(dev, "Maximum memory resources exceeded\n"); >> + return -EINVAL; >> + } >> + >> + mem = devm_kmalloc(dev, sizeof(*mem), GFP_KERNEL); >> + if (!mem) { >> + err = -ENOMEM; >> + goto free_resources; >> + } >> + >> + of_pci_range_to_resource(&range, node, mem); >> + >> + switch (mem->flags & IORESOURCE_TYPE_BITS) { >> + case IORESOURCE_MEM: >> + offset = range.cpu_addr - range.pci_addr; >> + mem_resno++; >> + break; >> + default: >> + err = -EINVAL; >> + break; >> + } >> + >> + if (err < 0) { >> + dev_warn(dev, "Invalid resource found %pR\n", mem); >> + continue; >> + } >> + >> + err = request_resource(&iomem_resource, mem); >> + if (err) >> + goto free_resources; >> + >> + pci_add_resource_offset(&port->resources, mem, offset); >> + } >> + >> + /* Get the bus range */ >> + if (of_pci_parse_bus_range(node, &port->bus_range)) { >> + u32 val = pcie_read(port, XILINX_PCIE_REG_BIR); >> + u8 last; >> + >> + last = (val & XILINX_PCIE_BIR_ECAM_SZ_MASK) >> >> + XILINX_PCIE_BIR_ECAM_SZ_SHIFT; >> + >> + port->bus_range = (struct resource) { >> + .name = node->name, >> + .start = 0, >> + .end = last, >> + .flags = IORESOURCE_BUS, >> + }; >> + } >> + >> + /* Register bus resource */ >> + pci_add_resource(&port->resources, &port->bus_range); >> + >> + return 0; >> + >> +free_resources: >> + release_child_resources(&iomem_resource); >> + list_for_each_entry(win, &port->resources, list) >> + devm_kfree(dev, win->res); >> + pci_free_resource_list(&port->resources); >> + >> + return err; >> +} >> + >> +/** >> + * xilinx_pcie_parse_dt - Parse Device tree >> + * @port: PCIe port information >> + * >> + * Return: '0' on success and error value on failure >> + */ >> +static int xilinx_pcie_parse_dt(struct xilinx_pcie_port *port) >> +{ >> + struct device *dev = port->dev; >> + struct device_node *node = dev->of_node; >> + struct resource regs; >> + const char *type; >> + int err; >> + >> + type = of_get_property(node, "device_type", NULL); >> + if (!type || strcmp(type, "pci")) { >> + dev_err(dev, "invalid \"device_type\" %s\n", type); >> + return -EINVAL; >> + } >> + >> + err = of_address_to_resource(node, 0, ®s); >> + if (err) { >> + dev_err(dev, "missing \"reg\" property\n"); >> + return err; >> + } >> + >> + port->reg_base = devm_ioremap_resource(dev, ®s); >> + if (IS_ERR(port->reg_base)) >> + return PTR_ERR(port->reg_base); >> + >> + port->irq = irq_of_parse_and_map(node, 0); >> + err = devm_request_irq(dev, port->irq, xilinx_pcie_intr_handler, >> + IRQF_SHARED, "xilinx-pcie", port); >> + if (err) { >> + dev_err(dev, "unable to request irq %d\n", port->irq); >> + return err; >> + } >> + >> + return 0; >> +} >> + >> +/** >> + * xilinx_pcie_probe - Probe function >> + * @pdev: Platform device pointer >> + * >> + * Return: '0' on success and error value on failure >> + */ >> +static int xilinx_pcie_probe(struct platform_device *pdev) >> +{ >> + struct xilinx_pcie_port *port; >> + struct hw_pci hw; >> + struct device *dev = &pdev->dev; >> + int err; >> + >> + if (!dev->of_node) >> + return -ENODEV; >> + >> + port = devm_kzalloc(dev, sizeof(*port), GFP_KERNEL); >> + if (!port) >> + return -ENOMEM; >> + >> + port->dev = dev; >> + >> + err = xilinx_pcie_parse_dt(port); >> + if (err) { >> + dev_err(dev, "Parsing DT failed\n"); >> + return err; >> + } >> + >> + xilinx_pcie_init_port(port); >> + >> + err = xilinx_pcie_init_irq_domain(port); >> + if (err) { >> + dev_err(dev, "Failed creating IRQ Domain\n"); >> + return err; >> + } >> + >> + /* >> + * Parse PCI ranges, configuration bus range and >> + * request their resources >> + */ >> + INIT_LIST_HEAD(&port->resources); >> + err = xilinx_pcie_parse_and_add_res(port); >> + if (err) { >> + dev_err(dev, "Failed adding resources\n"); >> + return err; >> + } >> + >> + platform_set_drvdata(pdev, port); >> + >> + /* Register the device */ >> + memset(&hw, 0, sizeof(hw)); >> + hw = (struct hw_pci) { >> + .nr_controllers = 1, >> + .private_data = (void **)&port, >> + .setup = xilinx_pcie_setup, >> + .map_irq = of_irq_parse_and_map_pci, >> + .add_bus = xilinx_pcie_add_bus, >> + .scan = xilinx_pcie_scan_bus, >> + .ops = &xilinx_pcie_ops, >> + }; >> + pci_common_init_dev(dev, &hw); >> + >> + return 0; >> +} >> + >> +/** >> + * xilinx_pcie_remove - Remove function >> + * @pdev: Platform device pointer >> + * >> + * Return: '0' always >> + */ >> +static int xilinx_pcie_remove(struct platform_device *pdev) >> +{ >> + struct xilinx_pcie_port *port = platform_get_drvdata(pdev); >> + >> + xilinx_pcie_free_irq_domain(port); >> + >> + return 0; >> +} >> + >> +static struct of_device_id xilinx_pcie_of_match[] = { >> + { .compatible = "xlnx,axi-pcie-host-1.00.a", }, >> + {} >> +}; >> + >> +static struct platform_driver xilinx_pcie_driver = { >> + .driver = { >> + .name = "xilinx-pcie", >> + .owner = THIS_MODULE, >> + .of_match_table = xilinx_pcie_of_match, >> + .suppress_bind_attrs = true, >> + }, >> + .probe = xilinx_pcie_probe, >> + .remove = xilinx_pcie_remove, >> +}; >> +module_platform_driver(xilinx_pcie_driver); >> + >> +MODULE_AUTHOR("Xilinx Inc"); >> +MODULE_DESCRIPTION("Xilinx AXI PCIe driver"); >> +MODULE_LICENSE("GPL v2"); >> -- >> 1.7.9.5 >> > -- > To unsubscribe from this list: send the line "unsubscribe linux-pci" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html -- To unsubscribe from this list: send the line "unsubscribe linux-pci" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/Documentation/devicetree/bindings/pci/xilinx-pcie.txt b/Documentation/devicetree/bindings/pci/xilinx-pcie.txt new file mode 100644 index 0000000..3e2c88d --- /dev/null +++ b/Documentation/devicetree/bindings/pci/xilinx-pcie.txt @@ -0,0 +1,62 @@ +* Xilinx AXI PCIe Root Port Bridge DT description + +Required properties: +- #address-cells: Address representation for root ports, set to <3> +- #size-cells: Size representation for root ports, set to <2> +- #interrupt-cells: specifies the number of cells needed to encode an + interrupt source. The value must be 1. +- compatible: Should contain "xlnx,axi-pcie-host-1.00.a" +- reg: Should contain AXI PCIe registers location and length +- device_type: must be "pci" +- interrupts: Should contain AXI PCIe interrupt +- interrupt-map-mask, + interrupt-map: standard PCI properties to define the mapping of the + PCI interface to interrupt numbers. +- ranges: ranges for the PCI memory regions (I/O space region is not + supported by hardware) + Please refer to the standard PCI bus binding document for a more + detailed explanation + +Optional properties: +- bus-range: PCI bus numbers covered + +Interrupt controller child node ++++++++++++++++++++++++++++++++ +Required properties: +- interrupt-controller: identifies the node as an interrupt controller +- #address-cells: specifies the number of cells needed to encode an + address. The value must be 0. +- #interrupt-cells: specifies the number of cells needed to encode an + interrupt source. The value must be 1. + +NOTE: +The core provides a single interrupt for both INTx/MSI messages. So, +created a interrupt controller node to support 'interrupt-map' DT +functionality. The driver will create an IRQ domain for this map, decode +the four INTx interrupts in ISR and route them to this domain. + + +Example: +++++++++ + + pci_express: axi-pcie@50000000 { + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + compatible = "xlnx,axi-pcie-host-1.00.a"; + reg = < 0x50000000 0x10000000 >; + device_type = "pci"; + interrupts = < 0 52 4 >; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0 0 0 1 &pcie_intc 1>, + <0 0 0 2 &pcie_intc 2>, + <0 0 0 3 &pcie_intc 3>, + <0 0 0 4 &pcie_intc 4>; + ranges = < 0x02000000 0 0x60000000 0x60000000 0 0x10000000 >; + + pcie_intc: interrupt-controller { + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <1>; + } + }; diff --git a/drivers/pci/host/Kconfig b/drivers/pci/host/Kconfig index 21df477..255a9fa 100644 --- a/drivers/pci/host/Kconfig +++ b/drivers/pci/host/Kconfig @@ -46,4 +46,11 @@ config PCI_HOST_GENERIC Say Y here if you want to support a simple generic PCI host controller, such as the one emulated by kvmtool. +config PCIE_XILINX + bool "Xilinx AXI PCIe host bridge support" + depends on ARCH_ZYNQ + help + Say 'Y' here if you want kernel to support the Xilinx AXI PCIe + Host Bridge driver. + endmenu diff --git a/drivers/pci/host/Makefile b/drivers/pci/host/Makefile index 611ba4b..339595c 100644 --- a/drivers/pci/host/Makefile +++ b/drivers/pci/host/Makefile @@ -6,3 +6,4 @@ obj-$(CONFIG_PCI_TEGRA) += pci-tegra.o obj-$(CONFIG_PCI_RCAR_GEN2) += pci-rcar-gen2.o obj-$(CONFIG_PCI_RCAR_GEN2_PCIE) += pcie-rcar.o obj-$(CONFIG_PCI_HOST_GENERIC) += pci-host-generic.o +obj-$(CONFIG_PCIE_XILINX) += pcie-xilinx.o diff --git a/drivers/pci/host/pcie-xilinx.c b/drivers/pci/host/pcie-xilinx.c new file mode 100644 index 0000000..32c5ded --- /dev/null +++ b/drivers/pci/host/pcie-xilinx.c @@ -0,0 +1,978 @@ +/* + * PCIe host controller driver for Xilinx AXI PCIe Bridge + * + * Copyright (c) 2012 - 2014 Xilinx, Inc. + * + * Based on the Tegra PCIe driver + * + * Bits taken from Synopsys Designware Host controller driver and + * ARM PCI Host generic driver. + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + */ + +#include <linux/interrupt.h> +#include <linux/irq.h> +#include <linux/irqdomain.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/msi.h> +#include <linux/of_address.h> +#include <linux/of_pci.h> +#include <linux/of_platform.h> +#include <linux/of_irq.h> +#include <linux/pci.h> +#include <linux/platform_device.h> + +/* Register definitions */ +#define XILINX_PCIE_REG_BIR 0x00000130 +#define XILINX_PCIE_REG_IDR 0x00000138 +#define XILINX_PCIE_REG_IMR 0x0000013c +#define XILINX_PCIE_REG_PSCR 0x00000144 +#define XILINX_PCIE_REG_RPSC 0x00000148 +#define XILINX_PCIE_REG_MSIBASE1 0x0000014c +#define XILINX_PCIE_REG_MSIBASE2 0x00000150 +#define XILINX_PCIE_REG_RPEFR 0x00000154 +#define XILINX_PCIE_REG_RPIFR1 0x00000158 +#define XILINX_PCIE_REG_RPIFR2 0x0000015c + +/* Interrupt registers definitions */ +#define XILINX_PCIE_INTR_LINK_DOWN BIT(0) +#define XILINX_PCIE_INTR_ECRC_ERR BIT(1) +#define XILINX_PCIE_INTR_STR_ERR BIT(2) +#define XILINX_PCIE_INTR_HOT_RESET BIT(3) +#define XILINX_PCIE_INTR_CFG_TIMEOUT BIT(8) +#define XILINX_PCIE_INTR_CORRECTABLE BIT(9) +#define XILINX_PCIE_INTR_NONFATAL BIT(10) +#define XILINX_PCIE_INTR_FATAL BIT(11) +#define XILINX_PCIE_INTR_INTX BIT(16) +#define XILINX_PCIE_INTR_MSI BIT(17) +#define XILINX_PCIE_INTR_SLV_UNSUPP BIT(20) +#define XILINX_PCIE_INTR_SLV_UNEXP BIT(21) +#define XILINX_PCIE_INTR_SLV_COMPL BIT(22) +#define XILINX_PCIE_INTR_SLV_ERRP BIT(23) +#define XILINX_PCIE_INTR_SLV_CMPABT BIT(24) +#define XILINX_PCIE_INTR_SLV_ILLBUR BIT(25) +#define XILINX_PCIE_INTR_MST_DECERR BIT(26) +#define XILINX_PCIE_INTR_MST_SLVERR BIT(27) +#define XILINX_PCIE_INTR_MST_ERRP BIT(28) +#define XILINX_PCIE_IMR_ALL_MASK 0x1FF30FED +#define XILINX_PCIE_IDR_ALL_MASK 0xFFFFFFFF + +/* Root Port Error FIFO Read Register definitions */ +#define XILINX_PCIE_RPEFR_ERR_VALID BIT(18) +#define XILINX_PCIE_RPEFR_REQ_ID GENMASK(15, 0) +#define XILINX_PCIE_RPEFR_ALL_MASK 0xFFFFFFFF + +/* Root Port Interrupt FIFO Read Register 1 definitions */ +#define XILINX_PCIE_RPIFR1_INTR_VALID BIT(31) +#define XILINX_PCIE_RPIFR1_MSI_INTR BIT(30) +#define XILINX_PCIE_RPIFR1_INTR_MASK GENMASK(28, 27) +#define XILINX_PCIE_RPIFR1_ALL_MASK 0xFFFFFFFF +#define XILINX_PCIE_RPIFR1_INTR_SHIFT 27 + +/* Bridge Info Register definitions */ +#define XILINX_PCIE_BIR_ECAM_SZ_MASK GENMASK(18, 16) +#define XILINX_PCIE_BIR_ECAM_SZ_SHIFT 16 + +/* Root Port Interrupt FIFO Read Register 2 definitions */ +#define XILINX_PCIE_RPIFR2_MSG_DATA GENMASK(15, 0) + +/* Root Port Status/control Register definitions */ +#define XILINX_PCIE_REG_RPSC_BEN BIT(0) + +/* Phy Status/Control Register definitions */ +#define XILINX_PCIE_REG_PSCR_LNKUP BIT(11) + +/* ECAM definitions */ +#define ECAM_BUS_NUM_SHIFT 20 +#define ECAM_DEV_NUM_SHIFT 12 + +/* Number of MSI IRQs */ +#define XILINX_NUM_MSI_IRQS 128 + +/* Number of Memory Resources */ +#define XILINX_MAX_NUM_RESOURCES 3 + +/** + * struct xilinx_pcie_port - PCIe port information + * @reg_base: IO Mapped Register Base + * @irq: Interrupt number + * @msi_pages: MSI pages + * @root_busno: Root Bus number + * @dev: Device pointer + * @irq_domain: IRQ domain pointer + * @bus_range: Bus range + * @resources: Bus Resources + */ +struct xilinx_pcie_port { + void __iomem *reg_base; + u32 irq; + unsigned long msi_pages; + u8 root_busno; + struct device *dev; + struct irq_domain *irq_domain; + struct resource bus_range; + struct list_head resources; +}; + +static DECLARE_BITMAP(msi_irq_in_use, XILINX_NUM_MSI_IRQS); + +static inline struct xilinx_pcie_port *sys_to_pcie(struct pci_sys_data *sys) +{ + return sys->private_data; +} + +static inline u32 pcie_read(struct xilinx_pcie_port *port, u32 reg) +{ + return readl(port->reg_base + reg); +} + +static inline void pcie_write(struct xilinx_pcie_port *port, + u32 val, u32 reg) +{ + writel(val, port->reg_base + reg); +} + +static inline bool xilinx_pcie_link_is_up(struct xilinx_pcie_port *port) +{ + return (pcie_read(port, XILINX_PCIE_REG_PSCR) & + XILINX_PCIE_REG_PSCR_LNKUP) ? 1 : 0; +} + +/** + * xilinx_pcie_clear_err_interrupts - Clear Error Interrupts + * @port: PCIe port information + */ +static void xilinx_pcie_clear_err_interrupts(struct xilinx_pcie_port *port) +{ + u32 val = pcie_read(port, XILINX_PCIE_REG_RPEFR); + + if (val & XILINX_PCIE_RPEFR_ERR_VALID) { + dev_dbg(port->dev, "Requester ID %d\n", + val & XILINX_PCIE_RPEFR_REQ_ID); + pcie_write(port, XILINX_PCIE_RPEFR_ALL_MASK, + XILINX_PCIE_REG_RPEFR); + } +} + +/** + * xilinx_pcie_valid_device - Check if a valid device is present on bus + * @bus: PCI Bus structure + * @devfn: device/function + * + * Return: 'true' on success and 'false' if invalid device is found + */ +static bool xilinx_pcie_valid_device(struct pci_bus *bus, + unsigned int devfn) +{ + struct xilinx_pcie_port *port = sys_to_pcie(bus->sysdata); + + /* Check if link is up when trying to access downstream ports */ + if (bus->number != port->root_busno) + if (!xilinx_pcie_link_is_up(port)) + return false; + + /* Only one device down on each root port */ + if (bus->number == port->root_busno && devfn > 0) + return false; + + /* + * Do not read more than one device on the bus directly attached + * to RC. + */ + if (bus->primary == port->root_busno && devfn > 0) + return false; + + return true; +} + +/** + * xilinx_pcie_config_base - Get configuration base + * @bus: PCI Bus structure + * @devfn: Device/function + * @where: Offset from base + * + * Return: Base address of the configuration space needed to be + * accessed. + */ +static void __iomem *xilinx_pcie_config_base(struct pci_bus *bus, + unsigned int devfn, + int where) +{ + struct xilinx_pcie_port *port = sys_to_pcie(bus->sysdata); + int relbus; + + relbus = (bus->number << ECAM_BUS_NUM_SHIFT) | + (devfn << ECAM_DEV_NUM_SHIFT); + + return port->reg_base + relbus + where; +} + +/** + * xilinx_pcie_read_config - Read configuration space + * @bus: PCI Bus structure + * @devfn: Device/function + * @where: Offset from base + * @size: Byte/word/dword + * @val: Value to be read + * + * Return: PCIBIOS_SUCCESSFUL on success + * EINVAL/PCIBIOS_DEVICE_NOT_FOUND/PCIBIOS_BAD_REGISTER_NUMBER + * on failure. + */ +static int xilinx_pcie_read_config(struct pci_bus *bus, + unsigned int devfn, int where, + int size, u32 *val) +{ + void __iomem *addr; + + if (!xilinx_pcie_valid_device(bus, devfn)) { + *val = 0xFFFFFFFF; + return PCIBIOS_DEVICE_NOT_FOUND; + } + + addr = xilinx_pcie_config_base(bus, devfn, where); + + switch (size) { + case 1: + *val = readb(addr); + break; + case 2: + *val = readw(addr); + break; + default: + *val = readl(addr); + break; + } + + return PCIBIOS_SUCCESSFUL; +} + +/** + * xilinx_pcie_write_config - Write configuration space + * @bus: PCI Bus structure + * @devfn: Device/function + * @where: Offset from base + * @size: Byte/word/dword + * @val: Value to be written to device + * + * Return: PCIBIOS_SUCCESSFUL on success, + * EINVAL/PCIBIOS_DEVICE_NOT_FOUND/PCIBIOS_BAD_REGISTER_NUMBER + * on failure. + */ +static int xilinx_pcie_write_config(struct pci_bus *bus, + unsigned int devfn, int where, + int size, u32 val) +{ + void __iomem *addr; + + if (!xilinx_pcie_valid_device(bus, devfn)) + return PCIBIOS_DEVICE_NOT_FOUND; + + addr = xilinx_pcie_config_base(bus, devfn, where); + + switch (size) { + case 1: + writeb(val, addr); + break; + case 2: + writew(val, addr); + break; + default: + writel(val, addr); + break; + } + + return PCIBIOS_SUCCESSFUL; +} + +/* PCIe operations */ +static struct pci_ops xilinx_pcie_ops = { + .read = xilinx_pcie_read_config, + .write = xilinx_pcie_write_config, +}; + +/* MSI functions */ + +/** + * xilinx_pcie_destroy_msi - Free MSI number + * @irq: IRQ to be freed + */ +static void xilinx_pcie_destroy_msi(unsigned int irq) +{ + struct irq_desc *desc; + struct msi_desc *msi; + struct xilinx_pcie_port *port; + + desc = irq_to_desc(irq); + msi = irq_desc_get_msi_desc(desc); + port = sys_to_pcie(msi->dev->bus->sysdata); + + if (!test_bit(irq, msi_irq_in_use)) + dev_err(port->dev, "Trying to free unused MSI#%d\n", irq); + else + clear_bit(irq, msi_irq_in_use); +} + +/** + * xilinx_pcie_assign_msi - Allocate MSI number + * @port: PCIe port structure + * + * Return: A valid IRQ on success and error value on failure. + */ +static int xilinx_pcie_assign_msi(struct xilinx_pcie_port *port) +{ + int pos; + + pos = find_first_zero_bit(msi_irq_in_use, XILINX_NUM_MSI_IRQS); + if (pos < XILINX_NUM_MSI_IRQS) + set_bit(pos, msi_irq_in_use); + else + return -ENOSPC; + + return pos; +} + +/** + * xilinx_msi_teardown_irq - Destroy the MSI + * @chip: MSI Chip descriptor + * @irq: MSI IRQ to destroy + */ +static void xilinx_msi_teardown_irq(struct msi_chip *chip, unsigned int irq) +{ + xilinx_pcie_destroy_msi(irq); +} + +/** + * xilinx_pcie_msi_setup_irq - Setup MSI request + * @chip: MSI chip pointer + * @pdev: PCIe device pointer + * @desc: MSI descriptor pointer + * + * Return: '0' on success and error value on failure + */ +static int xilinx_pcie_msi_setup_irq(struct msi_chip *chip, + struct pci_dev *pdev, + struct msi_desc *desc) +{ + struct xilinx_pcie_port *port = sys_to_pcie(pdev->bus->sysdata); + unsigned int irq; + int hwirq; + struct msi_msg msg; + phys_addr_t msg_addr; + + hwirq = xilinx_pcie_assign_msi(port); + if (irq < 0) + return irq; + + irq = irq_create_mapping(port->irq_domain, hwirq); + if (!irq) + return -EINVAL; + + irq_set_msi_desc(irq, desc); + + msg_addr = virt_to_phys((void *)port->msi_pages); + + msg.address_hi = 0; + msg.address_lo = msg_addr; + msg.data = irq; + + write_msi_msg(irq, &msg); + + return 0; +} + +/* MSI Chip Descriptor */ +static struct msi_chip xilinx_pcie_msi_chip = { + .setup_irq = xilinx_pcie_msi_setup_irq, + .teardown_irq = xilinx_msi_teardown_irq, +}; + +/* HW Interrupt Chip Descriptor */ +static struct irq_chip xilinx_msi_irq_chip = { + .name = "Xilinx PCIe MSI", + .irq_enable = unmask_msi_irq, + .irq_disable = mask_msi_irq, + .irq_mask = mask_msi_irq, + .irq_unmask = unmask_msi_irq, +}; + +/** + * xilinx_pcie_msi_map - Set the handler for the MSI and mark IRQ as valid + * @domain: IRQ domain + * @irq: Virtual IRQ number + * @hwirq: HW interrupt number + * + * Return: Always returns 0. + */ +static int xilinx_pcie_msi_map(struct irq_domain *domain, unsigned int irq, + irq_hw_number_t hwirq) +{ + irq_set_chip_and_handler(irq, &xilinx_msi_irq_chip, handle_simple_irq); + irq_set_chip_data(irq, domain->host_data); + set_irq_flags(irq, IRQF_VALID); + + return 0; +} + +/* IRQ Domain operations */ +static const struct irq_domain_ops msi_domain_ops = { + .map = xilinx_pcie_msi_map, +}; + +/** + * xilinx_pcie_enable_msi - Enable MSI support + * @port: PCIe port information + */ +static void xilinx_pcie_enable_msi(struct xilinx_pcie_port *port) +{ + phys_addr_t msg_addr; + + port->msi_pages = __get_free_pages(GFP_KERNEL, 0); + msg_addr = virt_to_phys((void *)port->msi_pages); + pcie_write(port, 0x0, XILINX_PCIE_REG_MSIBASE1); + pcie_write(port, msg_addr, XILINX_PCIE_REG_MSIBASE2); +} + +/** + * xilinx_pcie_add_bus - Add MSI chip info to PCIe bus + * @bus: PCIe bus + */ +static void xilinx_pcie_add_bus(struct pci_bus *bus) +{ + if (IS_ENABLED(CONFIG_PCI_MSI)) { + struct xilinx_pcie_port *port = sys_to_pcie(bus->sysdata); + + xilinx_pcie_msi_chip.dev = port->dev; + bus->msi = &xilinx_pcie_msi_chip; + } +} + +/* INTx Functions */ + +/** + * xilinx_pcie_intx_map - Set the handler for the INTx and mark IRQ as valid + * @domain: IRQ domain + * @irq: Virtual IRQ number + * @hwirq: HW interrupt number + * + * Return: Always returns 0. + */ +static int xilinx_pcie_intx_map(struct irq_domain *domain, unsigned int irq, + irq_hw_number_t hwirq) +{ + irq_set_chip_and_handler(irq, &dummy_irq_chip, handle_simple_irq); + irq_set_chip_data(irq, domain->host_data); + set_irq_flags(irq, IRQF_VALID); + + return 0; +} + +/* INTx IRQ Domain operations */ +static const struct irq_domain_ops intx_domain_ops = { + .map = xilinx_pcie_intx_map, +}; + +/* PCIe HW Functions */ + +/** + * xilinx_pcie_intr_handler - Interrupt Service Handler + * @irq: IRQ number + * @data: PCIe port information + * + * Return: IRQ_HANDLED on success and IRQ_NONE on failure + */ +static irqreturn_t xilinx_pcie_intr_handler(int irq, void *data) +{ + struct xilinx_pcie_port *port = (struct xilinx_pcie_port *)data; + u32 val, mask, status, msi_data; + + /* Read interrupt decode and mask registers */ + val = pcie_read(port, XILINX_PCIE_REG_IDR); + mask = pcie_read(port, XILINX_PCIE_REG_IMR); + + status = val & mask; + if (!status) + return IRQ_NONE; + + if (status & XILINX_PCIE_INTR_LINK_DOWN) + dev_warn(port->dev, "Link Down\n"); + + if (status & XILINX_PCIE_INTR_ECRC_ERR) + dev_warn(port->dev, "ECRC failed\n"); + + if (status & XILINX_PCIE_INTR_STR_ERR) + dev_warn(port->dev, "Streaming error\n"); + + if (status & XILINX_PCIE_INTR_HOT_RESET) + dev_info(port->dev, "Hot reset\n"); + + if (status & XILINX_PCIE_INTR_CFG_TIMEOUT) + dev_warn(port->dev, "ECAM access timeout\n"); + + if (status & XILINX_PCIE_INTR_CORRECTABLE) { + dev_warn(port->dev, "Correctable error message\n"); + xilinx_pcie_clear_err_interrupts(port); + } + + if (status & XILINX_PCIE_INTR_NONFATAL) { + dev_warn(port->dev, "Non fatal error message\n"); + xilinx_pcie_clear_err_interrupts(port); + } + + if (status & XILINX_PCIE_INTR_FATAL) { + dev_warn(port->dev, "Fatal error message\n"); + xilinx_pcie_clear_err_interrupts(port); + } + + if (status & XILINX_PCIE_INTR_INTX) { + /* INTx interrupt received */ + val = pcie_read(port, XILINX_PCIE_REG_RPIFR1); + + /* Check whether interrupt valid */ + if (!(val & XILINX_PCIE_RPIFR1_INTR_VALID)) { + dev_warn(port->dev, "RP Intr FIFO1 read error\n"); + return IRQ_HANDLED; + } + + /* Clear interrupt FIFO register 1 */ + pcie_write(port, XILINX_PCIE_RPIFR1_ALL_MASK, + XILINX_PCIE_REG_RPIFR1); + + /* Handle INTx Interrupt */ + val = ((val & XILINX_PCIE_RPIFR1_INTR_MASK) >> + XILINX_PCIE_RPIFR1_INTR_SHIFT) + 1; + generic_handle_irq(irq_find_mapping(port->irq_domain, val)); + } + + if (status & XILINX_PCIE_INTR_MSI) { + /* MSI Interrupt */ + val = pcie_read(port, XILINX_PCIE_REG_RPIFR1); + + if (!(val & XILINX_PCIE_RPIFR1_INTR_VALID)) { + dev_warn(port->dev, "RP Intr FIFO1 read error\n"); + return IRQ_HANDLED; + } + + if (val & XILINX_PCIE_RPIFR1_MSI_INTR) { + msi_data = pcie_read(port, XILINX_PCIE_REG_RPIFR2) & + XILINX_PCIE_RPIFR2_MSG_DATA; + + /* Clear interrupt FIFO register 1 */ + pcie_write(port, XILINX_PCIE_RPIFR1_ALL_MASK, + XILINX_PCIE_REG_RPIFR1); + + if (IS_ENABLED(CONFIG_PCI_MSI)) { + /* Handle MSI Interrupt */ + generic_handle_irq(msi_data); + } + } + } + + if (status & XILINX_PCIE_INTR_SLV_UNSUPP) + dev_warn(port->dev, "Slave unsupported request\n"); + + if (status & XILINX_PCIE_INTR_SLV_UNEXP) + dev_warn(port->dev, "Slave unexpected completion\n"); + + if (status & XILINX_PCIE_INTR_SLV_COMPL) + dev_warn(port->dev, "Slave completion timeout\n"); + + if (status & XILINX_PCIE_INTR_SLV_ERRP) + dev_warn(port->dev, "Slave Error Poison\n"); + + if (status & XILINX_PCIE_INTR_SLV_CMPABT) + dev_warn(port->dev, "Slave Completer Abort\n"); + + if (status & XILINX_PCIE_INTR_SLV_ILLBUR) + dev_warn(port->dev, "Slave Illegal Burst\n"); + + if (status & XILINX_PCIE_INTR_MST_DECERR) + dev_warn(port->dev, "Master decode error\n"); + + if (status & XILINX_PCIE_INTR_MST_SLVERR) + dev_warn(port->dev, "Master slave error\n"); + + if (status & XILINX_PCIE_INTR_MST_ERRP) + dev_warn(port->dev, "Master error poison\n"); + + /* Clear the Interrupt Decode register */ + pcie_write(port, status, XILINX_PCIE_REG_IDR); + + return IRQ_HANDLED; +} + +/** + * xilinx_pcie_free_irq_domain - Free IRQ domain + * @port: PCIe port information + */ +static void xilinx_pcie_free_irq_domain(struct xilinx_pcie_port *port) +{ + int i; + u32 irq, num_irqs; + + /* Free IRQ Domain */ + if (IS_ENABLED(CONFIG_PCI_MSI)) { + + free_pages(port->msi_pages, 0); + + num_irqs = XILINX_NUM_MSI_IRQS; + } else { + /* INTx */ + num_irqs = 4; + } + + for (i = 0; i < num_irqs; i++) { + irq = irq_find_mapping(port->irq_domain, i); + if (irq > 0) + irq_dispose_mapping(irq); + } + + irq_domain_remove(port->irq_domain); +} + +/** + * xilinx_pcie_init_irq_domain - Initialize IRQ domain + * @port: PCIe port information + * + * Return: '0' on success and error value on failure + */ +static int xilinx_pcie_init_irq_domain(struct xilinx_pcie_port *port) +{ + struct device *dev = port->dev; + struct device_node *node = dev->of_node; + struct device_node *pcie_intc_node; + + /* Setup INTx */ + pcie_intc_node = of_get_next_child(node, NULL); + if (!pcie_intc_node) { + dev_err(dev, "No PCIe Intc node found\n"); + return PTR_ERR(pcie_intc_node); + } + + port->irq_domain = irq_domain_add_linear(pcie_intc_node, 4, + &intx_domain_ops, + port); + if (!port->irq_domain) { + dev_err(dev, "Failed to get a INTx IRQ domain\n"); + return PTR_ERR(port->irq_domain); + } + + /* Setup MSI */ + if (IS_ENABLED(CONFIG_PCI_MSI)) { + port->irq_domain = irq_domain_add_linear(node, + XILINX_NUM_MSI_IRQS, + &msi_domain_ops, + &xilinx_pcie_msi_chip); + if (!port->irq_domain) { + dev_err(dev, "Failed to get a MSI IRQ domain\n"); + return PTR_ERR(port->irq_domain); + } + + xilinx_pcie_enable_msi(port); + } + + return 0; +} + +/** + * xilinx_pcie_init_port - Initialize hardware + * @port: PCIe port information + */ +static void xilinx_pcie_init_port(struct xilinx_pcie_port *port) +{ + if (xilinx_pcie_link_is_up(port)) + dev_info(port->dev, "PCIe Link is UP\n"); + else + dev_info(port->dev, "PCIe Link is DOWN\n"); + + /* Disable all interrupts */ + pcie_write(port, ~XILINX_PCIE_IDR_ALL_MASK, + XILINX_PCIE_REG_IMR); + + /* Clear pending interrupts */ + pcie_write(port, pcie_read(port, XILINX_PCIE_REG_IDR) & + XILINX_PCIE_IMR_ALL_MASK, + XILINX_PCIE_REG_IDR); + + /* Enable all interrupts */ + pcie_write(port, XILINX_PCIE_IMR_ALL_MASK, XILINX_PCIE_REG_IMR); + + /* Enable the Bridge enable bit */ + pcie_write(port, pcie_read(port, XILINX_PCIE_REG_RPSC) | + XILINX_PCIE_REG_RPSC_BEN, + XILINX_PCIE_REG_RPSC); +} + +/** + * xilinx_pcie_setup - Setup memory resources + * @nr: Bus number + * @sys: Per controller structure + * + * Return: '1' on success and error value on failure + */ +static int xilinx_pcie_setup(int nr, struct pci_sys_data *sys) +{ + struct xilinx_pcie_port *port = sys_to_pcie(sys); + + list_splice_init(&port->resources, &sys->resources); + + return 1; +} + +/** + * xilinx_pcie_scan_bus - Scan PCIe bus for devices + * @nr: Bus number + * @sys: Per controller structure + * + * Return: Valid Bus pointer on success and NULL on failure + */ +static struct pci_bus *xilinx_pcie_scan_bus(int nr, + struct pci_sys_data *sys) +{ + struct xilinx_pcie_port *port = sys_to_pcie(sys); + struct pci_bus *bus; + + port->root_busno = sys->busnr; + bus = pci_scan_root_bus(port->dev, sys->busnr, &xilinx_pcie_ops, + sys, &sys->resources); + + return bus; +} + +/** + * xilinx_pcie_parse_and_add_res - Add resources by parsing ranges + * @port: PCIe port information + * + * Return: '0' on success and error value on failure + */ +static int xilinx_pcie_parse_and_add_res(struct xilinx_pcie_port *port) +{ + struct device *dev = port->dev; + struct device_node *node = dev->of_node; + struct resource *mem; + resource_size_t offset; + struct of_pci_range_parser parser; + struct of_pci_range range; + struct pci_host_bridge_window *win; + int err = 0, mem_resno = 0; + + /* Get the ranges */ + if (of_pci_range_parser_init(&parser, node)) { + dev_err(dev, "missing \"ranges\" property\n"); + return -EINVAL; + } + + /* Parse the ranges and add the resources found to the list */ + for_each_of_pci_range(&parser, &range) { + + if (mem_resno >= XILINX_MAX_NUM_RESOURCES) { + dev_err(dev, "Maximum memory resources exceeded\n"); + return -EINVAL; + } + + mem = devm_kmalloc(dev, sizeof(*mem), GFP_KERNEL); + if (!mem) { + err = -ENOMEM; + goto free_resources; + } + + of_pci_range_to_resource(&range, node, mem); + + switch (mem->flags & IORESOURCE_TYPE_BITS) { + case IORESOURCE_MEM: + offset = range.cpu_addr - range.pci_addr; + mem_resno++; + break; + default: + err = -EINVAL; + break; + } + + if (err < 0) { + dev_warn(dev, "Invalid resource found %pR\n", mem); + continue; + } + + err = request_resource(&iomem_resource, mem); + if (err) + goto free_resources; + + pci_add_resource_offset(&port->resources, mem, offset); + } + + /* Get the bus range */ + if (of_pci_parse_bus_range(node, &port->bus_range)) { + u32 val = pcie_read(port, XILINX_PCIE_REG_BIR); + u8 last; + + last = (val & XILINX_PCIE_BIR_ECAM_SZ_MASK) >> + XILINX_PCIE_BIR_ECAM_SZ_SHIFT; + + port->bus_range = (struct resource) { + .name = node->name, + .start = 0, + .end = last, + .flags = IORESOURCE_BUS, + }; + } + + /* Register bus resource */ + pci_add_resource(&port->resources, &port->bus_range); + + return 0; + +free_resources: + release_child_resources(&iomem_resource); + list_for_each_entry(win, &port->resources, list) + devm_kfree(dev, win->res); + pci_free_resource_list(&port->resources); + + return err; +} + +/** + * xilinx_pcie_parse_dt - Parse Device tree + * @port: PCIe port information + * + * Return: '0' on success and error value on failure + */ +static int xilinx_pcie_parse_dt(struct xilinx_pcie_port *port) +{ + struct device *dev = port->dev; + struct device_node *node = dev->of_node; + struct resource regs; + const char *type; + int err; + + type = of_get_property(node, "device_type", NULL); + if (!type || strcmp(type, "pci")) { + dev_err(dev, "invalid \"device_type\" %s\n", type); + return -EINVAL; + } + + err = of_address_to_resource(node, 0, ®s); + if (err) { + dev_err(dev, "missing \"reg\" property\n"); + return err; + } + + port->reg_base = devm_ioremap_resource(dev, ®s); + if (IS_ERR(port->reg_base)) + return PTR_ERR(port->reg_base); + + port->irq = irq_of_parse_and_map(node, 0); + err = devm_request_irq(dev, port->irq, xilinx_pcie_intr_handler, + IRQF_SHARED, "xilinx-pcie", port); + if (err) { + dev_err(dev, "unable to request irq %d\n", port->irq); + return err; + } + + return 0; +} + +/** + * xilinx_pcie_probe - Probe function + * @pdev: Platform device pointer + * + * Return: '0' on success and error value on failure + */ +static int xilinx_pcie_probe(struct platform_device *pdev) +{ + struct xilinx_pcie_port *port; + struct hw_pci hw; + struct device *dev = &pdev->dev; + int err; + + if (!dev->of_node) + return -ENODEV; + + port = devm_kzalloc(dev, sizeof(*port), GFP_KERNEL); + if (!port) + return -ENOMEM; + + port->dev = dev; + + err = xilinx_pcie_parse_dt(port); + if (err) { + dev_err(dev, "Parsing DT failed\n"); + return err; + } + + xilinx_pcie_init_port(port); + + err = xilinx_pcie_init_irq_domain(port); + if (err) { + dev_err(dev, "Failed creating IRQ Domain\n"); + return err; + } + + /* + * Parse PCI ranges, configuration bus range and + * request their resources + */ + INIT_LIST_HEAD(&port->resources); + err = xilinx_pcie_parse_and_add_res(port); + if (err) { + dev_err(dev, "Failed adding resources\n"); + return err; + } + + platform_set_drvdata(pdev, port); + + /* Register the device */ + memset(&hw, 0, sizeof(hw)); + hw = (struct hw_pci) { + .nr_controllers = 1, + .private_data = (void **)&port, + .setup = xilinx_pcie_setup, + .map_irq = of_irq_parse_and_map_pci, + .add_bus = xilinx_pcie_add_bus, + .scan = xilinx_pcie_scan_bus, + .ops = &xilinx_pcie_ops, + }; + pci_common_init_dev(dev, &hw); + + return 0; +} + +/** + * xilinx_pcie_remove - Remove function + * @pdev: Platform device pointer + * + * Return: '0' always + */ +static int xilinx_pcie_remove(struct platform_device *pdev) +{ + struct xilinx_pcie_port *port = platform_get_drvdata(pdev); + + xilinx_pcie_free_irq_domain(port); + + return 0; +} + +static struct of_device_id xilinx_pcie_of_match[] = { + { .compatible = "xlnx,axi-pcie-host-1.00.a", }, + {} +}; + +static struct platform_driver xilinx_pcie_driver = { + .driver = { + .name = "xilinx-pcie", + .owner = THIS_MODULE, + .of_match_table = xilinx_pcie_of_match, + .suppress_bind_attrs = true, + }, + .probe = xilinx_pcie_probe, + .remove = xilinx_pcie_remove, +}; +module_platform_driver(xilinx_pcie_driver); + +MODULE_AUTHOR("Xilinx Inc"); +MODULE_DESCRIPTION("Xilinx AXI PCIe driver"); +MODULE_LICENSE("GPL v2");