| Message ID | 1411597048-25470-2-git-send-email-hauke@hauke-m.de (mailing list archive) |
|---|---|
| State | Not Applicable, archived |
| Headers | show |
On Thursday 25 September 2014 00:17:28 Hauke Mehrtens wrote: > It is not possible to auto detect the irq numbers used by the cores on > an arm SoC. If bcma was registered with device tree it will search for > some device tree nodes with the irq number and add it to the core > configuration. > > Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Some more explanation for how this can be improved according to my earlier reply: > > @@ -17,4 +21,24 @@ Example: > ranges = <0x00000000 0x18000000 0x00100000>; > #address-cells = <1>; > #size-cells = <1>; > + > + #interrupt-cells = <0>; <1> > + interrupt-map-mask = <0x000fffff>; > + interrupt-map = > + /* Ethernet Controller 0 */ > + <0x00024000 &gic GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>, > + > + /* Ethernet Controller 1 */ > + <0x00025000 &gic GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>; Add 0 here after the address for the first interrupt of a device, or a consecutive number for additional interrupts. But check first if the register that is used on MIPS to access the interrupts has any function. If it does, put the bit position in here instead. > + pcie@12000 { > + interrupt-parent = <&gic>; > + reg = <0x00012000 0x1000>; > + interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>; > + }; so this can go away. > +static int bcma_of_irq_parse(struct platform_device *parent, > + struct bcma_device *core, > + struct of_phandle_args *out_irq) > +{ > + __be32 laddr[1]; > + int rc; > + > + if (core->dev.of_node) { > + rc = of_irq_parse_one(core->dev.of_node, 0, out_irq); > + if (!rc) > + return rc; > + } > + > + out_irq->np = parent->dev.of_node; > + out_irq->args_count = 0; > + > + laddr[0] = cpu_to_be32(core->addr); > + return of_irq_parse_raw(laddr, out_irq); > +} You probably don't need a separate function here, just move the code into bcma_of_get_irq. > +static int bcma_of_get_irq(struct platform_device *parent, > + struct bcma_device *core) Make this function take the interrupt number as an argument > + > static void bcma_of_fill_device(struct platform_device *parent, > struct bcma_device *core) > { > @@ -161,6 +201,8 @@ static void bcma_of_fill_device(struct platform_device *parent, > node = bcma_of_find_child_device(parent, core); > if (node) > core->dev.of_node = node; > + > + core->irq = bcma_of_get_irq(parent, core); > } It's probably a good idea to still put the first interrupt number in here, but drivers should not rely on the interrupt numbers being consecutive. If a driver needs more than one irq, it should call bcma_of_get_irq() or another API function that calls it internally and that also works on MIPS. Arnd -- To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/Documentation/devicetree/bindings/bus/bcma.txt b/Documentation/devicetree/bindings/bus/bcma.txt index e9070c1..1dc75d3 100644 --- a/Documentation/devicetree/bindings/bus/bcma.txt +++ b/Documentation/devicetree/bindings/bus/bcma.txt @@ -8,6 +8,10 @@ Required properties: The cores on the AXI bus are automatically detected by bcma with the memory ranges they are using and they get registered afterwards. +Automatic detection of the IRQ number is not reliable on +BCM47xx/BCM53xx ARM SoCs. To assign IRQ numbers to the cores, provide +them manually through device tree. The IRQ number and the device tree +child entry will get assigned to the core with the matching reg address. Example: @@ -17,4 +21,24 @@ Example: ranges = <0x00000000 0x18000000 0x00100000>; #address-cells = <1>; #size-cells = <1>; + + #interrupt-cells = <0>; + interrupt-map-mask = <0x000fffff>; + interrupt-map = + /* Ethernet Controller 0 */ + <0x00024000 &gic GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>, + + /* Ethernet Controller 1 */ + <0x00025000 &gic GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>; + + pcie@12000 { + interrupt-parent = <&gic>; + reg = <0x00012000 0x1000>; + interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>; + }; }; diff --git a/drivers/bcma/main.c b/drivers/bcma/main.c index d1656c2..870f01d 100644 --- a/drivers/bcma/main.c +++ b/drivers/bcma/main.c @@ -11,6 +11,7 @@ #include <linux/bcma/bcma.h> #include <linux/slab.h> #include <linux/of_address.h> +#include <linux/of_irq.h> MODULE_DESCRIPTION("Broadcom's specific AMBA driver"); MODULE_LICENSE("GPL"); @@ -153,6 +154,45 @@ static struct device_node *bcma_of_find_child_device(struct platform_device *par return NULL; } +static int bcma_of_irq_parse(struct platform_device *parent, + struct bcma_device *core, + struct of_phandle_args *out_irq) +{ + __be32 laddr[1]; + int rc; + + if (core->dev.of_node) { + rc = of_irq_parse_one(core->dev.of_node, 0, out_irq); + if (!rc) + return rc; + } + + out_irq->np = parent->dev.of_node; + out_irq->args_count = 0; + + laddr[0] = cpu_to_be32(core->addr); + return of_irq_parse_raw(laddr, out_irq); +} + +static int bcma_of_get_irq(struct platform_device *parent, + struct bcma_device *core) +{ + struct of_phandle_args out_irq; + int ret; + + if (!parent || !parent->dev.of_node) + return 0; + + ret = bcma_of_irq_parse(parent, core, &out_irq); + if (ret) { + bcma_debug(core->bus, "bcma_of_get_irq() failed with rc=%d\n", + ret); + return 0; + } + + return irq_create_of_mapping(&out_irq); +} + static void bcma_of_fill_device(struct platform_device *parent, struct bcma_device *core) { @@ -161,6 +201,8 @@ static void bcma_of_fill_device(struct platform_device *parent, node = bcma_of_find_child_device(parent, core); if (node) core->dev.of_node = node; + + core->irq = bcma_of_get_irq(parent, core); } #else static void bcma_of_fill_device(struct platform_device *parent,
It is not possible to auto detect the irq numbers used by the cores on an arm SoC. If bcma was registered with device tree it will search for some device tree nodes with the irq number and add it to the core configuration. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> --- Documentation/devicetree/bindings/bus/bcma.txt | 24 +++++++++++++++ drivers/bcma/main.c | 42 ++++++++++++++++++++++++++ 2 files changed, 66 insertions(+) This is based on wireless-testing and should go into that tree. changes since: v4: - make use of interrupt-map - only do the irq stuff here v2: - use of_translate_address() to support ranges RFC: - add #ifdef CONFIG_OF