diff mbox

[v11,3/3] ARM: dts: add rk3288 power-domain node

Message ID 1415829690-20236-4-git-send-email-caesar.wang@rock-chips.com (mailing list archive)
State New, archived
Headers show

Commit Message

Wang Caesar Nov. 12, 2014, 10:01 p.m. UTC
This patch add the needed clocks into power-controller.

why need we do so that?

Firstly, we always be needed turn off clocks to save power when
the system enter suspend.So we need to enumerate the clocks are needed
to switch power doamin no and off.

Secondly, Rk3288 reset circuit should be syncchronous reset and
then sync revoked.so we need to enable clocks of all devices.

Signed-off-by: Jack Dai <jack.dai@rock-chips.com>
Signed-off-by: jinkun.hong <jinkun.hong@rock-chips.com>
Signed-off-by: Caesar Wang <caesar.wang@rock-chips.com>

---

Changes in v11: None
Changes in v10:
    - fix missing the #include <dt-bindings/power-domain/rk3288.h>
    - remove the notes

Changes in v9:
    - add decription for power-doamin node

Changes in v8:
    - DTS go back to v2

Changes in v7: None
Changes in v6: None
Changes in v5: None
Changes in v4: None
Changes in v3:
    - Decomposition power-controller, changed to multiple controller
    (gpu-power-controller, hevc-power-controller)

Changes in v2:
    - make pd_vio clocks all one entry per line and alphabetize.
    - power: power-controller move back to pinctrl: pinctrl.

 arch/arm/boot/dts/rk3288.dtsi | 66 +++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 66 insertions(+)

Comments

Doug Anderson Nov. 13, 2014, 5:33 p.m. UTC | #1
Hi,

On Wed, Nov 12, 2014 at 2:01 PM, Caesar Wang <caesar.wang@rock-chips.com> wrote:
> +               pd_vio {
> +                       reg = <RK3288_PD_VIO>;
> +                       clocks = <&cru ACLK_IEP>,
> +                                <&cru ACLK_ISP>,
> +                                <&cru ACLK_RGA_NIU>,
> +                                <&cru ACLK_RGA>,
> +                                <&cru ACLK_VIO0_NIU>,
> +                                <&cru ACLK_VIO1_NIU>,
> +                                <&cru ACLK_VIP>,
> +                                <&cru ACLK_VOP0>,
> +                                <&cru ACLK_VOP1>,
> +                                <&cru DCLK_VOP0>,
> +                                <&cru DCLK_VOP1>,
> +                                <&cru HCLK_IEP>,
> +                                <&cru HCLK_ISP>,
> +                                <&cru HCLK_RGA>,
> +                                <&cru HCLK_VIO_AHB_ARBI>,
> +                                <&cru HCLK_VIO_NIU>,
> +                                <&cru HCLK_VIO2_H2P>,
> +                                <&cru HCLK_VIP>,
> +                                <&cru HCLK_VOP0>,
> +                                <&cru HCLK_VOP1>,
> +                                <&cru PCLK_EDP_CTRL>,
> +                                <&cru PCLK_HDMI_CTRL>,
> +                                <&cru PCLK_LVDS_PHY>,
> +                                <&cru PCLK_MIPI_CSI>,
> +                                <&cru PCLK_MIPI_DSI0>,
> +                                <&cru PCLK_MIPI_DSI1>,
> +                                <&cru PCLK_VIO2_H2P>,
> +                                <&cru SCLK_EDP_24M>,
> +                                <&cru SCLK_EDP>,
> +                                <&cru SCLK_HDMI_CEC>,
> +                                <&cru SCLK_HDMI_HDCP>,
> +                                <&cru SCLK_ISP_JPE>,
> +                                <&cru SCLK_ISP>,
> +                                <&cru SCLK_RGA>;

This was discussed offlist, but just to make sure it's summarized here:

Some of the above clocks are "IGNORE_UNUSED" (AKA left on) in Linux
right now because nobody is managing them right now (due to the fact
that they are "interface unit clocks", etc).  The fact that these are
now being enabled and disabled as part of power domain transitions
will break this.

My vote would be to leave such clocks out of the list for now until we
figure out how they should be dealt with.


-Doug
diff mbox

Patch

diff --git a/arch/arm/boot/dts/rk3288.dtsi b/arch/arm/boot/dts/rk3288.dtsi
index cb18bb4..4e64fb2 100644
--- a/arch/arm/boot/dts/rk3288.dtsi
+++ b/arch/arm/boot/dts/rk3288.dtsi
@@ -15,6 +15,7 @@ 
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/pinctrl/rockchip.h>
 #include <dt-bindings/clock/rk3288-cru.h>
+#include <dt-bindings/power-domain/rk3288.h>
 #include "skeleton.dtsi"
 
 / {
@@ -989,4 +990,69 @@ 
 			};
 		};
 	};
+
+	power: power-controller {
+		compatible = "rockchip,rk3288-power-controller";
+		#power-domain-cells = <1>;
+		rockchip,pmu = <&pmu>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pd_gpu {
+			reg = <RK3288_PD_GPU>;
+			clocks = <&cru ACLK_GPU>;
+		};
+
+		pd_hevc {
+			reg = <RK3288_PD_HEVC>;
+			clocks = <&cru ACLK_HEVC>,
+				 <&cru SCLK_HEVC_CABAC>,
+				 <&cru SCLK_HEVC_CORE>,
+				 <&cru HCLK_HEVC>;
+		};
+
+		pd_vio {
+			reg = <RK3288_PD_VIO>;
+			clocks = <&cru ACLK_IEP>,
+				 <&cru ACLK_ISP>,
+				 <&cru ACLK_RGA_NIU>,
+				 <&cru ACLK_RGA>,
+				 <&cru ACLK_VIO0_NIU>,
+				 <&cru ACLK_VIO1_NIU>,
+				 <&cru ACLK_VIP>,
+				 <&cru ACLK_VOP0>,
+				 <&cru ACLK_VOP1>,
+				 <&cru DCLK_VOP0>,
+				 <&cru DCLK_VOP1>,
+				 <&cru HCLK_IEP>,
+				 <&cru HCLK_ISP>,
+				 <&cru HCLK_RGA>,
+				 <&cru HCLK_VIO_AHB_ARBI>,
+				 <&cru HCLK_VIO_NIU>,
+				 <&cru HCLK_VIO2_H2P>,
+				 <&cru HCLK_VIP>,
+				 <&cru HCLK_VOP0>,
+				 <&cru HCLK_VOP1>,
+				 <&cru PCLK_EDP_CTRL>,
+				 <&cru PCLK_HDMI_CTRL>,
+				 <&cru PCLK_LVDS_PHY>,
+				 <&cru PCLK_MIPI_CSI>,
+				 <&cru PCLK_MIPI_DSI0>,
+				 <&cru PCLK_MIPI_DSI1>,
+				 <&cru PCLK_VIO2_H2P>,
+				 <&cru SCLK_EDP_24M>,
+				 <&cru SCLK_EDP>,
+				 <&cru SCLK_HDMI_CEC>,
+				 <&cru SCLK_HDMI_HDCP>,
+				 <&cru SCLK_ISP_JPE>,
+				 <&cru SCLK_ISP>,
+				 <&cru SCLK_RGA>;
+		};
+
+		pd_video {
+			reg = <RK3288_PD_VIDEO>;
+			clocks = <&cru ACLK_VCODEC>,
+				 <&cru HCLK_VCODEC>;
+		};
+	};
 };