diff mbox

[1/2] mmc: dw_mmc: Make sure we only adjust the clock when power is on

Message ID 1424458639-23330-1-git-send-email-dianders@chromium.org (mailing list archive)
State New, archived
Headers show

Commit Message

Douglas Anderson Feb. 20, 2015, 6:57 p.m. UTC
It appears that we can confuse things if we try to turn on the MMC
clock when the power is off.  Adjust is so that we turn the clock on
(using dw_mci_setup_bus) after power is all the way on and we turn the
clock off before the power goes off.

Signed-off-by: Doug Anderson <dianders@chromium.org>
---
 drivers/mmc/host/dw_mmc.c | 16 ++++++++++------
 1 file changed, 10 insertions(+), 6 deletions(-)

Comments

Jaehoon Chung Feb. 25, 2015, 10:34 a.m. UTC | #1
Hi, Doug.

It makes sense. Looks good to me. Thanks!

Acked-by: Jaehoon Chung <jh80.chung@samsung.com>

Best Regards,
Jaehoon Chung

On 02/21/2015 03:57 AM, Doug Anderson wrote:
> It appears that we can confuse things if we try to turn on the MMC
> clock when the power is off.  Adjust is so that we turn the clock on
> (using dw_mci_setup_bus) after power is all the way on and we turn the
> clock off before the power goes off.
> 
> Signed-off-by: Doug Anderson <dianders@chromium.org>
> ---
>  drivers/mmc/host/dw_mmc.c | 16 ++++++++++------
>  1 file changed, 10 insertions(+), 6 deletions(-)
> 
> diff --git a/drivers/mmc/host/dw_mmc.c b/drivers/mmc/host/dw_mmc.c
> index 4d2e3c2..43fcae1 100644
> --- a/drivers/mmc/host/dw_mmc.c
> +++ b/drivers/mmc/host/dw_mmc.c
> @@ -1101,12 +1101,6 @@ static void dw_mci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
>  	if (drv_data && drv_data->set_ios)
>  		drv_data->set_ios(slot->host, ios);
>  
> -	/* Slot specific timing and width adjustment */
> -	dw_mci_setup_bus(slot, false);
> -
> -	if (slot->host->state == STATE_WAITING_CMD11_DONE && ios->clock != 0)
> -		slot->host->state = STATE_IDLE;
> -
>  	switch (ios->power_mode) {
>  	case MMC_POWER_UP:
>  		if (!IS_ERR(mmc->supply.vmmc)) {
> @@ -1133,8 +1127,15 @@ static void dw_mci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
>  			else
>  				slot->host->vqmmc_enabled = true;
>  		}
> +
> +		/* Adjust clock / bus width after power is up */
> +		dw_mci_setup_bus(slot, false);
> +
>  		break;
>  	case MMC_POWER_OFF:
> +		/* Turn clock off before power goes down */
> +		dw_mci_setup_bus(slot, false);
> +
>  		if (!IS_ERR(mmc->supply.vmmc))
>  			mmc_regulator_set_ocr(mmc, mmc->supply.vmmc, 0);
>  
> @@ -1150,6 +1151,9 @@ static void dw_mci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
>  	default:
>  		break;
>  	}
> +
> +	if (slot->host->state == STATE_WAITING_CMD11_DONE && ios->clock != 0)
> +		slot->host->state = STATE_IDLE;
>  }
>  
>  static int dw_mci_card_busy(struct mmc_host *mmc)
> 

--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Javier Martinez Canillas Feb. 25, 2015, 6:25 p.m. UTC | #2
Hello Doug,

On 02/20/2015 07:57 PM, Doug Anderson wrote:
> It appears that we can confuse things if we try to turn on the MMC
> clock when the power is off.  Adjust is so that we turn the clock on
> (using dw_mci_setup_bus) after power is all the way on and we turn the
> clock off before the power goes off.
> 
> Signed-off-by: Doug Anderson <dianders@chromium.org>

On an Exynos5250 Snow, Exynos5420 Peach Pit and Exynos5800 Peach Pi:

Tested-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>

Best regards,
Javier

--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox

Patch

diff --git a/drivers/mmc/host/dw_mmc.c b/drivers/mmc/host/dw_mmc.c
index 4d2e3c2..43fcae1 100644
--- a/drivers/mmc/host/dw_mmc.c
+++ b/drivers/mmc/host/dw_mmc.c
@@ -1101,12 +1101,6 @@  static void dw_mci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
 	if (drv_data && drv_data->set_ios)
 		drv_data->set_ios(slot->host, ios);
 
-	/* Slot specific timing and width adjustment */
-	dw_mci_setup_bus(slot, false);
-
-	if (slot->host->state == STATE_WAITING_CMD11_DONE && ios->clock != 0)
-		slot->host->state = STATE_IDLE;
-
 	switch (ios->power_mode) {
 	case MMC_POWER_UP:
 		if (!IS_ERR(mmc->supply.vmmc)) {
@@ -1133,8 +1127,15 @@  static void dw_mci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
 			else
 				slot->host->vqmmc_enabled = true;
 		}
+
+		/* Adjust clock / bus width after power is up */
+		dw_mci_setup_bus(slot, false);
+
 		break;
 	case MMC_POWER_OFF:
+		/* Turn clock off before power goes down */
+		dw_mci_setup_bus(slot, false);
+
 		if (!IS_ERR(mmc->supply.vmmc))
 			mmc_regulator_set_ocr(mmc, mmc->supply.vmmc, 0);
 
@@ -1150,6 +1151,9 @@  static void dw_mci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
 	default:
 		break;
 	}
+
+	if (slot->host->state == STATE_WAITING_CMD11_DONE && ios->clock != 0)
+		slot->host->state = STATE_IDLE;
 }
 
 static int dw_mci_card_busy(struct mmc_host *mmc)