| Message ID | 1426428024-4538-7-git-send-email-qca_vkondrat@qca.qualcomm.com (mailing list archive) |
|---|---|
| State | Rejected |
| Delegated to: | Kalle Valo |
| Headers | show |
On Sunday, March 15, 2015 04:00:20 PM Vladimir Kondratiev wrote: > For the AP, configuration may say not to bridge traffic between > wireless clients. This is conveyed from user space (ex: hostapd has > ap_isolate parameter) with NL80211_CMD_SET_BSS, to the driver's > cfg80211 ops method change_bss > > Add support for this setting. > > Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> > Please ignore, old patch, sent by mistake. -- To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/drivers/net/wireless/ath/wil6210/cfg80211.c b/drivers/net/wireless/ath/wil6210/cfg80211.c index 4bd708c..5db6a6d 100644 --- a/drivers/net/wireless/ath/wil6210/cfg80211.c +++ b/drivers/net/wireless/ath/wil6210/cfg80211.c @@ -917,6 +917,21 @@ static int wil_cfg80211_probe_client(struct wiphy *wiphy, return 0; } +static int wil_cfg80211_change_bss(struct wiphy *wiphy, + struct net_device *dev, + struct bss_parameters *params) +{ + struct wil6210_priv *wil = wiphy_to_wil(wiphy); + + if (params->ap_isolate >= 0) { + wil_dbg_misc(wil, "%s(ap_isolate %d => %d)\n", __func__, + wil->ap_isolate, params->ap_isolate); + wil->ap_isolate = params->ap_isolate; + } + + return 0; +} + static struct cfg80211_ops wil_cfg80211_ops = { .scan = wil_cfg80211_scan, .connect = wil_cfg80211_connect, @@ -937,6 +952,7 @@ static struct cfg80211_ops wil_cfg80211_ops = { .stop_ap = wil_cfg80211_stop_ap, .del_station = wil_cfg80211_del_station, .probe_client = wil_cfg80211_probe_client, + .change_bss = wil_cfg80211_change_bss, }; static void wil_wiphy_init(struct wiphy *wiphy) diff --git a/drivers/net/wireless/ath/wil6210/debugfs.c b/drivers/net/wireless/ath/wil6210/debugfs.c index 3830cc2..a42cb89 100644 --- a/drivers/net/wireless/ath/wil6210/debugfs.c +++ b/drivers/net/wireless/ath/wil6210/debugfs.c @@ -1405,6 +1405,7 @@ static const struct dbg_off dbg_wil_off[] = { WIL_FIELD(fw_version, S_IRUGO, doff_u32), WIL_FIELD(hw_version, S_IRUGO, doff_x32), WIL_FIELD(recovery_count, S_IRUGO, doff_u32), + WIL_FIELD(ap_isolate, S_IRUGO, doff_u32), {}, }; diff --git a/drivers/net/wireless/ath/wil6210/main.c b/drivers/net/wireless/ath/wil6210/main.c index db74e81..afff8d3 100644 --- a/drivers/net/wireless/ath/wil6210/main.c +++ b/drivers/net/wireless/ath/wil6210/main.c @@ -714,6 +714,7 @@ int wil_reset(struct wil6210_priv *wil, bool load_fw) /* init after reset */ wil->pending_connect_cid = -1; + wil->ap_isolate = 0; reinit_completion(&wil->wmi_ready); reinit_completion(&wil->wmi_call); diff --git a/drivers/net/wireless/ath/wil6210/txrx.c b/drivers/net/wireless/ath/wil6210/txrx.c index 08d3cac..689081c 100644 --- a/drivers/net/wireless/ath/wil6210/txrx.c +++ b/drivers/net/wireless/ath/wil6210/txrx.c @@ -515,7 +515,7 @@ void wil_netif_rx_any(struct sk_buff *skb, struct net_device *ndev) skb_orphan(skb); - if (wdev->iftype == NL80211_IFTYPE_AP) { + if (wdev->iftype == NL80211_IFTYPE_AP && !wil->ap_isolate) { if (mcast) { /* send multicast frames both to higher layers in * local net stack and back to the wireless medium diff --git a/drivers/net/wireless/ath/wil6210/wil6210.h b/drivers/net/wireless/ath/wil6210/wil6210.h index b6e65c3..c1a71ab 100644 --- a/drivers/net/wireless/ath/wil6210/wil6210.h +++ b/drivers/net/wireless/ath/wil6210/wil6210.h @@ -542,6 +542,7 @@ struct wil6210_priv { u32 monitor_flags; u32 privacy; /* secure connection? */ int sinfo_gen; + u32 ap_isolate; /* no intra-BSS communication */ /* interrupt moderation */ u32 tx_max_burst_duration; u32 tx_interframe_timeout;
For the AP, configuration may say not to bridge traffic between wireless clients. This is conveyed from user space (ex: hostapd has ap_isolate parameter) with NL80211_CMD_SET_BSS, to the driver's cfg80211 ops method change_bss Add support for this setting. Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> --- drivers/net/wireless/ath/wil6210/cfg80211.c | 16 ++++++++++++++++ drivers/net/wireless/ath/wil6210/debugfs.c | 1 + drivers/net/wireless/ath/wil6210/main.c | 1 + drivers/net/wireless/ath/wil6210/txrx.c | 2 +- drivers/net/wireless/ath/wil6210/wil6210.h | 1 + 5 files changed, 20 insertions(+), 1 deletion(-)