| Message ID | 1427211032-2270-4-git-send-email-mst@redhat.com (mailing list archive) |
|---|---|
| State | New, archived |
| Delegated to: | Bjorn Helgaas |
| Headers | show |
On Tue, Mar 24, 2015 at 04:42:35PM +0100, Michael S. Tsirkin wrote: > pci_msi_init_pci_dev and pci_msi_off share a lot of code. > This used to be justified since pci_msi_init_pci_dev > wasn't compiled in when CONFIG_PCI_MSI is off. > Now that it is, let's reuse code. > > Signed-off-by: Michael S. Tsirkin <mst@redhat.com> > --- > drivers/pci/pci.c | 24 +++++------------------- > drivers/pci/probe.c | 11 ++++------- > 2 files changed, 9 insertions(+), 26 deletions(-) > > diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c > index 81f06e8..d5f297a 100644 > --- a/drivers/pci/pci.c > +++ b/drivers/pci/pci.c > @@ -3106,26 +3106,12 @@ EXPORT_SYMBOL_GPL(pci_check_and_unmask_intx); > */ > void pci_msi_off(struct pci_dev *dev) > { > - int pos; > - u16 control; > + if (dev->msi_cap) > + pci_msi_set_enable(dev, 0); > > - /* > - * This looks like it could go in msi.c, but we need it even when > - * CONFIG_PCI_MSI=n. For the same reason, we can't use > - * dev->msi_cap or dev->msix_cap here. > - */ > - pos = pci_find_capability(dev, PCI_CAP_ID_MSI); > - if (pos) { > - pci_read_config_word(dev, pos + PCI_MSI_FLAGS, &control); > - control &= ~PCI_MSI_FLAGS_ENABLE; > - pci_write_config_word(dev, pos + PCI_MSI_FLAGS, control); > - } > - pos = pci_find_capability(dev, PCI_CAP_ID_MSIX); > - if (pos) { > - pci_read_config_word(dev, pos + PCI_MSIX_FLAGS, &control); > - control &= ~PCI_MSIX_FLAGS_ENABLE; > - pci_write_config_word(dev, pos + PCI_MSIX_FLAGS, control); > - } > + dev->msix_cap = pci_find_capability(dev, PCI_CAP_ID_MSIX); I think the above line is superfluous, isn't it? You already do the same in pci_msi_init_pci_dev() (below). > + if (dev->msix_cap) > + pci_msix_clear_and_set_ctrl(dev, PCI_MSIX_FLAGS_ENABLE, 0); > } > EXPORT_SYMBOL_GPL(pci_msi_off); > > diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c > index 45d6d5c..baf8ddd 100644 > --- a/drivers/pci/probe.c > +++ b/drivers/pci/probe.c > @@ -1489,17 +1489,14 @@ static void pci_msi_init_pci_dev(struct pci_dev *dev) > INIT_LIST_HEAD(&dev->msi_list); > #endif > > + dev->msi_cap = pci_find_capability(dev, PCI_CAP_ID_MSI); > + dev->msix_cap = pci_find_capability(dev, PCI_CAP_ID_MSIX); > + > /* Disable the msi hardware to avoid screaming interrupts > * during boot. This is the power on reset default so > * usually this should be a noop. > */ > - dev->msi_cap = pci_find_capability(dev, PCI_CAP_ID_MSI); > - if (dev->msi_cap) > - pci_msi_set_enable(dev, 0); > - > - dev->msix_cap = pci_find_capability(dev, PCI_CAP_ID_MSIX); > - if (dev->msix_cap) > - pci_msix_clear_and_set_ctrl(dev, PCI_MSIX_FLAGS_ENABLE, 0); > + pci_msi_off(dev); > } > > static void pci_init_capabilities(struct pci_dev *dev) > -- > MST > -- To unsubscribe from this list: send the line "unsubscribe linux-pci" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Tue, Mar 24, 2015 at 06:33:57PM -0500, Bjorn Helgaas wrote: > On Tue, Mar 24, 2015 at 04:42:35PM +0100, Michael S. Tsirkin wrote: > > pci_msi_init_pci_dev and pci_msi_off share a lot of code. > > This used to be justified since pci_msi_init_pci_dev > > wasn't compiled in when CONFIG_PCI_MSI is off. > > Now that it is, let's reuse code. > > > > Signed-off-by: Michael S. Tsirkin <mst@redhat.com> > > --- > > drivers/pci/pci.c | 24 +++++------------------- > > drivers/pci/probe.c | 11 ++++------- > > 2 files changed, 9 insertions(+), 26 deletions(-) > > > > diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c > > index 81f06e8..d5f297a 100644 > > --- a/drivers/pci/pci.c > > +++ b/drivers/pci/pci.c > > @@ -3106,26 +3106,12 @@ EXPORT_SYMBOL_GPL(pci_check_and_unmask_intx); > > */ > > void pci_msi_off(struct pci_dev *dev) > > { > > - int pos; > > - u16 control; > > + if (dev->msi_cap) > > + pci_msi_set_enable(dev, 0); > > > > - /* > > - * This looks like it could go in msi.c, but we need it even when > > - * CONFIG_PCI_MSI=n. For the same reason, we can't use > > - * dev->msi_cap or dev->msix_cap here. > > - */ > > - pos = pci_find_capability(dev, PCI_CAP_ID_MSI); > > - if (pos) { > > - pci_read_config_word(dev, pos + PCI_MSI_FLAGS, &control); > > - control &= ~PCI_MSI_FLAGS_ENABLE; > > - pci_write_config_word(dev, pos + PCI_MSI_FLAGS, control); > > - } > > - pos = pci_find_capability(dev, PCI_CAP_ID_MSIX); > > - if (pos) { > > - pci_read_config_word(dev, pos + PCI_MSIX_FLAGS, &control); > > - control &= ~PCI_MSIX_FLAGS_ENABLE; > > - pci_write_config_word(dev, pos + PCI_MSIX_FLAGS, control); > > - } > > + dev->msix_cap = pci_find_capability(dev, PCI_CAP_ID_MSIX); > > I think the above line is superfluous, isn't it? You already do the same > in pci_msi_init_pci_dev() (below). Ugh. Yea. I'll fix that up, thanks! > > + if (dev->msix_cap) > > + pci_msix_clear_and_set_ctrl(dev, PCI_MSIX_FLAGS_ENABLE, 0); > > } > > EXPORT_SYMBOL_GPL(pci_msi_off); > > > > diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c > > index 45d6d5c..baf8ddd 100644 > > --- a/drivers/pci/probe.c > > +++ b/drivers/pci/probe.c > > @@ -1489,17 +1489,14 @@ static void pci_msi_init_pci_dev(struct pci_dev *dev) > > INIT_LIST_HEAD(&dev->msi_list); > > #endif > > > > + dev->msi_cap = pci_find_capability(dev, PCI_CAP_ID_MSI); > > + dev->msix_cap = pci_find_capability(dev, PCI_CAP_ID_MSIX); > > + > > /* Disable the msi hardware to avoid screaming interrupts > > * during boot. This is the power on reset default so > > * usually this should be a noop. > > */ > > - dev->msi_cap = pci_find_capability(dev, PCI_CAP_ID_MSI); > > - if (dev->msi_cap) > > - pci_msi_set_enable(dev, 0); > > - > > - dev->msix_cap = pci_find_capability(dev, PCI_CAP_ID_MSIX); > > - if (dev->msix_cap) > > - pci_msix_clear_and_set_ctrl(dev, PCI_MSIX_FLAGS_ENABLE, 0); > > + pci_msi_off(dev); > > } > > > > static void pci_init_capabilities(struct pci_dev *dev) > > -- > > MST > > -- To unsubscribe from this list: send the line "unsubscribe linux-pci" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c index 81f06e8..d5f297a 100644 --- a/drivers/pci/pci.c +++ b/drivers/pci/pci.c @@ -3106,26 +3106,12 @@ EXPORT_SYMBOL_GPL(pci_check_and_unmask_intx); */ void pci_msi_off(struct pci_dev *dev) { - int pos; - u16 control; + if (dev->msi_cap) + pci_msi_set_enable(dev, 0); - /* - * This looks like it could go in msi.c, but we need it even when - * CONFIG_PCI_MSI=n. For the same reason, we can't use - * dev->msi_cap or dev->msix_cap here. - */ - pos = pci_find_capability(dev, PCI_CAP_ID_MSI); - if (pos) { - pci_read_config_word(dev, pos + PCI_MSI_FLAGS, &control); - control &= ~PCI_MSI_FLAGS_ENABLE; - pci_write_config_word(dev, pos + PCI_MSI_FLAGS, control); - } - pos = pci_find_capability(dev, PCI_CAP_ID_MSIX); - if (pos) { - pci_read_config_word(dev, pos + PCI_MSIX_FLAGS, &control); - control &= ~PCI_MSIX_FLAGS_ENABLE; - pci_write_config_word(dev, pos + PCI_MSIX_FLAGS, control); - } + dev->msix_cap = pci_find_capability(dev, PCI_CAP_ID_MSIX); + if (dev->msix_cap) + pci_msix_clear_and_set_ctrl(dev, PCI_MSIX_FLAGS_ENABLE, 0); } EXPORT_SYMBOL_GPL(pci_msi_off); diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c index 45d6d5c..baf8ddd 100644 --- a/drivers/pci/probe.c +++ b/drivers/pci/probe.c @@ -1489,17 +1489,14 @@ static void pci_msi_init_pci_dev(struct pci_dev *dev) INIT_LIST_HEAD(&dev->msi_list); #endif + dev->msi_cap = pci_find_capability(dev, PCI_CAP_ID_MSI); + dev->msix_cap = pci_find_capability(dev, PCI_CAP_ID_MSIX); + /* Disable the msi hardware to avoid screaming interrupts * during boot. This is the power on reset default so * usually this should be a noop. */ - dev->msi_cap = pci_find_capability(dev, PCI_CAP_ID_MSI); - if (dev->msi_cap) - pci_msi_set_enable(dev, 0); - - dev->msix_cap = pci_find_capability(dev, PCI_CAP_ID_MSIX); - if (dev->msix_cap) - pci_msix_clear_and_set_ctrl(dev, PCI_MSIX_FLAGS_ENABLE, 0); + pci_msi_off(dev); } static void pci_init_capabilities(struct pci_dev *dev)
pci_msi_init_pci_dev and pci_msi_off share a lot of code. This used to be justified since pci_msi_init_pci_dev wasn't compiled in when CONFIG_PCI_MSI is off. Now that it is, let's reuse code. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> --- drivers/pci/pci.c | 24 +++++------------------- drivers/pci/probe.c | 11 ++++------- 2 files changed, 9 insertions(+), 26 deletions(-)