Message ID | 20150424014545.GA9252@devel.8.8.4.4 (mailing list archive) |
---|---|
State | New, archived |
Headers | show |
Hi, Andrew. 2015-04-24 10:45 GMT+09:00 Daeseok Youn <daeseok.youn@gmail.com>: > The use of 'status' in __ocfs2_add_entry() can return wrong > value. Some functions' return value in __ocfs2_add_entry(), > i.e ocfs2_journal_access_di() is saved to 'status'. > But 'status' is not used in 'bail' label for returning result > of __ocfs2_add_entry(). > > So use retval instead of status. > > Reviewed-by: Joseph Qi <joseph.qi@huawei.com> > Signed-off-by: Daeseok Youn <daeseok.youn@gmail.com> This patch was shown up to ocfs2 mailing list. https://oss.oracle.com/pipermail/ocfs2-devel/2015-April/010757.html please check for me. If this patch has any problem, let me know. Thanks. regards, Daeseok Youn. > --- > RESEND: missed my patch in ocfs2-devel mailing list so send it again > And also add 'Reviewed-by' line. > > Previous sent message of my patch > This patch was came from 'https://lkml.org/lkml/2015/2/27/655' > This patch was needed to test but I didn't have any environment > for testing ocfs2 filesystem. But I have one, now. > (I'm too busy to make this enviroment. And qemu for this fs is difficult > for me. :-(, sorry for that) > > Briefly how to set my environment for testing this fs with qemu. > 1. Getting and building linux kernel with linux-next branch for x86_64 > qemu. > And also options of ocfs2 related are enabled(built-in) > 2. Makes own root file system with 'buildroot' project. > 3. Getting and building ocfs2-tools. > Then binaries after building this tool are moved my rootfs. > 4. Makes dummy disk image(5G) which will be formatted in qemu. > 5. Booting qemu with rootfs image and dummy disk image. > 6. mkfs.ocfs2 --fs-feature=local <device> > this maybe possilbe to mount standalone mode. > 7. tunefs.ocfs2 --fs-features=indexed-dirs,noinline-data <device> > 8. make a cluster and one node > use o2cb_ctl tool. > 9. o2cb service load and initialize > # /etc/init.d/o2cb load && /etc/init.d/o2cb configure > # /etc/init.d/o2cb online > 10. mount ocfs2 > # mount.ocfs2 <device> <some directory> > > And use GDB for debugging my patch path. > Connect gdb with qemu and add breakpoint in __ocfs2_add_entry() of > fs/ocfs2/dir.c > > And test my patch. > # cd <some directory mounted with ocfs2> > # mkdir <specific directory> > > This how-to is not written all my work, just briefly I said. > > fs/ocfs2/dir.c | 20 ++++++++++---------- > 1 files changed, 10 insertions(+), 10 deletions(-) > > diff --git a/fs/ocfs2/dir.c b/fs/ocfs2/dir.c > index 990e8f7..a9513ff 100644 > --- a/fs/ocfs2/dir.c > +++ b/fs/ocfs2/dir.c > @@ -1607,7 +1607,7 @@ int __ocfs2_add_entry(handle_t *handle, > struct ocfs2_dir_entry *de, *de1; > struct ocfs2_dinode *di = (struct ocfs2_dinode *)parent_fe_bh->b_data; > struct super_block *sb = dir->i_sb; > - int retval, status; > + int retval; > unsigned int size = sb->s_blocksize; > struct buffer_head *insert_bh = lookup->dl_leaf_bh; > char *data_start = insert_bh->b_data; > @@ -1685,25 +1685,25 @@ int __ocfs2_add_entry(handle_t *handle, > } > > if (insert_bh == parent_fe_bh) > - status = ocfs2_journal_access_di(handle, > + retval = ocfs2_journal_access_di(handle, > INODE_CACHE(dir), > insert_bh, > OCFS2_JOURNAL_ACCESS_WRITE); > else { > - status = ocfs2_journal_access_db(handle, > + retval = ocfs2_journal_access_db(handle, > INODE_CACHE(dir), > insert_bh, > OCFS2_JOURNAL_ACCESS_WRITE); > > - if (ocfs2_dir_indexed(dir)) { > - status = ocfs2_dx_dir_insert(dir, > + if (!retval && ocfs2_dir_indexed(dir)) > + retval = ocfs2_dx_dir_insert(dir, > handle, > lookup); > - if (status) { > - mlog_errno(status); > - goto bail; > - } > - } > + } > + > + if (retval) { > + mlog_errno(retval); > + goto bail; > } > > /* By now the buffer is marked for journaling */ > -- > 1.7.1 >
2015-04-24 10:45 GMT+09:00 Daeseok Youn <daeseok.youn@gmail.com>: > The use of 'status' in __ocfs2_add_entry() can return wrong > value. Some functions' return value in __ocfs2_add_entry(), > i.e ocfs2_journal_access_di() is saved to 'status'. > But 'status' is not used in 'bail' label for returning result > of __ocfs2_add_entry(). > > So use retval instead of status. > > Reviewed-by: Joseph Qi <joseph.qi@huawei.com> > Signed-off-by: Daeseok Youn <daeseok.youn@gmail.com> > --- Andrew. How is it going this patch, please check for me. Actually I sent a mail for checking but that mail was not shown up to ocfs2 mailing list. original : patch url https://oss.oracle.com/pipermail/ocfs2-devel/2015-April/010757.html check mail : https://lkml.org/lkml/2015/4/28/840 Thanks. regards, Daeseok Youn. > RESEND: missed my patch in ocfs2-devel mailing list so send it again > And also add 'Reviewed-by' line. > > Previous sent message of my patch > This patch was came from 'https://lkml.org/lkml/2015/2/27/655' > This patch was needed to test but I didn't have any environment > for testing ocfs2 filesystem. But I have one, now. > (I'm too busy to make this enviroment. And qemu for this fs is difficult > for me. :-(, sorry for that) > > Briefly how to set my environment for testing this fs with qemu. > 1. Getting and building linux kernel with linux-next branch for x86_64 > qemu. > And also options of ocfs2 related are enabled(built-in) > 2. Makes own root file system with 'buildroot' project. > 3. Getting and building ocfs2-tools. > Then binaries after building this tool are moved my rootfs. > 4. Makes dummy disk image(5G) which will be formatted in qemu. > 5. Booting qemu with rootfs image and dummy disk image. > 6. mkfs.ocfs2 --fs-feature=local <device> > this maybe possilbe to mount standalone mode. > 7. tunefs.ocfs2 --fs-features=indexed-dirs,noinline-data <device> > 8. make a cluster and one node > use o2cb_ctl tool. > 9. o2cb service load and initialize > # /etc/init.d/o2cb load && /etc/init.d/o2cb configure > # /etc/init.d/o2cb online > 10. mount ocfs2 > # mount.ocfs2 <device> <some directory> > > And use GDB for debugging my patch path. > Connect gdb with qemu and add breakpoint in __ocfs2_add_entry() of > fs/ocfs2/dir.c > > And test my patch. > # cd <some directory mounted with ocfs2> > # mkdir <specific directory> > > This how-to is not written all my work, just briefly I said. > > fs/ocfs2/dir.c | 20 ++++++++++---------- > 1 files changed, 10 insertions(+), 10 deletions(-) > > diff --git a/fs/ocfs2/dir.c b/fs/ocfs2/dir.c > index 990e8f7..a9513ff 100644 > --- a/fs/ocfs2/dir.c > +++ b/fs/ocfs2/dir.c > @@ -1607,7 +1607,7 @@ int __ocfs2_add_entry(handle_t *handle, > struct ocfs2_dir_entry *de, *de1; > struct ocfs2_dinode *di = (struct ocfs2_dinode *)parent_fe_bh->b_data; > struct super_block *sb = dir->i_sb; > - int retval, status; > + int retval; > unsigned int size = sb->s_blocksize; > struct buffer_head *insert_bh = lookup->dl_leaf_bh; > char *data_start = insert_bh->b_data; > @@ -1685,25 +1685,25 @@ int __ocfs2_add_entry(handle_t *handle, > } > > if (insert_bh == parent_fe_bh) > - status = ocfs2_journal_access_di(handle, > + retval = ocfs2_journal_access_di(handle, > INODE_CACHE(dir), > insert_bh, > OCFS2_JOURNAL_ACCESS_WRITE); > else { > - status = ocfs2_journal_access_db(handle, > + retval = ocfs2_journal_access_db(handle, > INODE_CACHE(dir), > insert_bh, > OCFS2_JOURNAL_ACCESS_WRITE); > > - if (ocfs2_dir_indexed(dir)) { > - status = ocfs2_dx_dir_insert(dir, > + if (!retval && ocfs2_dir_indexed(dir)) > + retval = ocfs2_dx_dir_insert(dir, > handle, > lookup); > - if (status) { > - mlog_errno(status); > - goto bail; > - } > - } > + } > + > + if (retval) { > + mlog_errno(retval); > + goto bail; > } > > /* By now the buffer is marked for journaling */ > -- > 1.7.1 >
On Sun, 3 May 2015 12:02:39 +0900 DaeSeok Youn <daeseok.youn@gmail.com> wrote: > 2015-04-24 10:45 GMT+09:00 Daeseok Youn <daeseok.youn@gmail.com>: > > The use of 'status' in __ocfs2_add_entry() can return wrong > > value. Some functions' return value in __ocfs2_add_entry(), > > i.e ocfs2_journal_access_di() is saved to 'status'. > > But 'status' is not used in 'bail' label for returning result > > of __ocfs2_add_entry(). > > > > So use retval instead of status. > > > > Reviewed-by: Joseph Qi <joseph.qi@huawei.com> > > Signed-off-by: Daeseok Youn <daeseok.youn@gmail.com> > > --- > Andrew. > > How is it going this patch, please check for me. I merged this over a week ago and it is in linux-next: http://ozlabs.org/~akpm/mmotm/broken-out/ocfs2-use-retval-instead-of-status-for-checking-error.patch You were sent a commit email at the time.
2015-05-03 13:13 GMT+09:00 Andrew Morton <akpm@linux-foundation.org>: > On Sun, 3 May 2015 12:02:39 +0900 DaeSeok Youn <daeseok.youn@gmail.com> wrote: > >> 2015-04-24 10:45 GMT+09:00 Daeseok Youn <daeseok.youn@gmail.com>: >> > The use of 'status' in __ocfs2_add_entry() can return wrong >> > value. Some functions' return value in __ocfs2_add_entry(), >> > i.e ocfs2_journal_access_di() is saved to 'status'. >> > But 'status' is not used in 'bail' label for returning result >> > of __ocfs2_add_entry(). >> > >> > So use retval instead of status. >> > >> > Reviewed-by: Joseph Qi <joseph.qi@huawei.com> >> > Signed-off-by: Daeseok Youn <daeseok.youn@gmail.com> >> > --- >> Andrew. >> >> How is it going this patch, please check for me. > > I merged this over a week ago and it is in linux-next: > http://ozlabs.org/~akpm/mmotm/broken-out/ocfs2-use-retval-instead-of-status-for-checking-error.patch > > You were sent a commit email at the time. I missed your notification mail. Sorry. I update linux-next branch and check my commit. thanks. regards, Daeseok Youn.
diff --git a/fs/ocfs2/dir.c b/fs/ocfs2/dir.c index 990e8f7..a9513ff 100644 --- a/fs/ocfs2/dir.c +++ b/fs/ocfs2/dir.c @@ -1607,7 +1607,7 @@ int __ocfs2_add_entry(handle_t *handle, struct ocfs2_dir_entry *de, *de1; struct ocfs2_dinode *di = (struct ocfs2_dinode *)parent_fe_bh->b_data; struct super_block *sb = dir->i_sb; - int retval, status; + int retval; unsigned int size = sb->s_blocksize; struct buffer_head *insert_bh = lookup->dl_leaf_bh; char *data_start = insert_bh->b_data; @@ -1685,25 +1685,25 @@ int __ocfs2_add_entry(handle_t *handle, } if (insert_bh == parent_fe_bh) - status = ocfs2_journal_access_di(handle, + retval = ocfs2_journal_access_di(handle, INODE_CACHE(dir), insert_bh, OCFS2_JOURNAL_ACCESS_WRITE); else { - status = ocfs2_journal_access_db(handle, + retval = ocfs2_journal_access_db(handle, INODE_CACHE(dir), insert_bh, OCFS2_JOURNAL_ACCESS_WRITE); - if (ocfs2_dir_indexed(dir)) { - status = ocfs2_dx_dir_insert(dir, + if (!retval && ocfs2_dir_indexed(dir)) + retval = ocfs2_dx_dir_insert(dir, handle, lookup); - if (status) { - mlog_errno(status); - goto bail; - } - } + } + + if (retval) { + mlog_errno(retval); + goto bail; } /* By now the buffer is marked for journaling */