diff mbox

adm8211: fix checkpatch errors for indentation and new line around switch-case

Message ID 20150505113731.GA2885@bytefire-computer (mailing list archive)
State Changes Requested
Delegated to: Kalle Valo
Headers show

Commit Message

Okash Khawaja May 5, 2015, 11:37 a.m. UTC
This patch fixes these checkpatch.pl errors around a single switch-case block:

ERROR: switch and case should be at the same indent
ERROR: trailing statements should be on next line

More specifically, the fix has been applied to the five occurances of the errors listed below.

ERROR: switch and case should be at the same indent
#1100: FILE: adm8211.c:1100:
+		switch (cline) {
[...]
+		  default: reg |= (0x0 << 14);

ERROR: trailing statements should be on next line
#1101: FILE: adm8211.c:1101:
+		case  0x8: reg |= (0x1 << 14);

ERROR: trailing statements should be on next line
#1103: FILE: adm8211.c:1103:
+		case 0x16: reg |= (0x2 << 14);

ERROR: trailing statements should be on next line
#1105: FILE: adm8211.c:1105:
+		case 0x32: reg |= (0x3 << 14);

ERROR: trailing statements should be on next line
#1107: FILE: adm8211.c:1107:
+		  default: reg |= (0x0 << 14);

Signed-off-by: Okash Khawaja <okash.khawaja@gmail.com>
---
 drivers/net/wireless/adm8211.c | 20 ++++++++++++--------
 1 file changed, 12 insertions(+), 8 deletions(-)

Comments

Peter Rosin May 5, 2015, 12:03 p.m. UTC | #1
> diff --git a/drivers/net/wireless/adm8211.c b/drivers/net/wireless/adm8211.c
> index f07a618..058fb4b 100644
> --- a/drivers/net/wireless/adm8211.c
> +++ b/drivers/net/wireless/adm8211.c
> @@ -1098,14 +1098,18 @@ static void adm8211_hw_init(struct ieee80211_hw *dev)
>  		pci_read_config_byte(priv->pdev, PCI_CACHE_LINE_SIZE, &cline);
>  
>  		switch (cline) {
> -		case  0x8: reg |= (0x1 << 14);
> -			   break;
> -		case 0x16: reg |= (0x2 << 14);
> -			   break;
> -		case 0x32: reg |= (0x3 << 14);
> -			   break;
> -		  default: reg |= (0x0 << 14);
> -			   break;
> +		case  0x8:
> +			reg |= (0x1 << 14);
> +			break;
> +		case 0x16:
> +			reg |= (0x2 << 14);
> +			break;
> +		case 0x32:
> +			reg |= (0x3 << 14);
> +			break;
> +		default:
> +			reg |= (0x0 << 14);
> +			break;
>  		}
>  	}
>  

Those 0x16/0x32 hexadecimal case-selectors looking suspiciously like
decimal bits need a comment if they are in fact correct, which I doubt.

Cheers,
Peter

--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Joe Perches May 5, 2015, 1:50 p.m. UTC | #2
On Tue, 2015-05-05 at 14:03 +0200, Peter Rosin wrote:
> > diff --git a/drivers/net/wireless/adm8211.c b/drivers/net/wireless/adm8211.c
[]
> > @@ -1098,14 +1098,18 @@ static void adm8211_hw_init(struct ieee80211_hw *dev)
> >  		pci_read_config_byte(priv->pdev, PCI_CACHE_LINE_SIZE, &cline);
> >  
> >  		switch (cline) {
[]
> > +		case  0x8:
> > +			reg |= (0x1 << 14);
> > +			break;
> > +		case 0x16:
> > +			reg |= (0x2 << 14);
> > +			break;
> > +		case 0x32:
> > +			reg |= (0x3 << 14);
> > +			break;
> > +		default:
> > +			reg |= (0x0 << 14);
> > +			break;
> >  		}
> >  	}
> >  
> 
> Those 0x16/0x32 hexadecimal case-selectors looking suspiciously like
> decimal bits need a comment if they are in fact correct, which I doubt.

Good spot.

As it's testing PCI_CACHE_LINE_SIZE,
they seem very much broken.


--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Okash Khawaja May 5, 2015, 2:15 p.m. UTC | #3
> On 5 May 2015, at 14:50, Joe Perches <joe@perches.com> wrote:
> 
> On Tue, 2015-05-05 at 14:03 +0200, Peter Rosin wrote:
>>> diff --git a/drivers/net/wireless/adm8211.c b/drivers/net/wireless/adm8211.c
> []
>>> @@ -1098,14 +1098,18 @@ static void adm8211_hw_init(struct ieee80211_hw *dev)
>>>        pci_read_config_byte(priv->pdev, PCI_CACHE_LINE_SIZE, &cline);
>>> 
>>>        switch (cline) {
> []
>>> +        case  0x8:
>>> +            reg |= (0x1 << 14);
>>> +            break;
>>> +        case 0x16:
>>> +            reg |= (0x2 << 14);
>>> +            break;
>>> +        case 0x32:
>>> +            reg |= (0x3 << 14);
>>> +            break;
>>> +        default:
>>> +            reg |= (0x0 << 14);
>>> +            break;
>>>        }
>>>    }
>> 
>> Those 0x16/0x32 hexadecimal case-selectors looking suspiciously like
>> decimal bits need a comment if they are in fact correct, which I doubt.
> 
> Good spot.
> 
> As it's testing PCI_CACHE_LINE_SIZE,
> they seem very much broken.
> 
> 

Interesting. I'll be happy to fix that bit if someone could guide me on it. Looks like these values should be 0x10, 0x20 instead of 0x16, 0x32 respectively. But I am unable to understand their meaning in this code. 
Thanks--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox

Patch

diff --git a/drivers/net/wireless/adm8211.c b/drivers/net/wireless/adm8211.c
index f07a618..058fb4b 100644
--- a/drivers/net/wireless/adm8211.c
+++ b/drivers/net/wireless/adm8211.c
@@ -1098,14 +1098,18 @@  static void adm8211_hw_init(struct ieee80211_hw *dev)
 		pci_read_config_byte(priv->pdev, PCI_CACHE_LINE_SIZE, &cline);
 
 		switch (cline) {
-		case  0x8: reg |= (0x1 << 14);
-			   break;
-		case 0x16: reg |= (0x2 << 14);
-			   break;
-		case 0x32: reg |= (0x3 << 14);
-			   break;
-		  default: reg |= (0x0 << 14);
-			   break;
+		case  0x8:
+			reg |= (0x1 << 14);
+			break;
+		case 0x16:
+			reg |= (0x2 << 14);
+			break;
+		case 0x32:
+			reg |= (0x3 << 14);
+			break;
+		default:
+			reg |= (0x0 << 14);
+			break;
 		}
 	}