diff mbox

[v4,12/12] drm/i915: BDW clock change support

Message ID 1432282962-3530-13-git-send-email-mika.kahola@intel.com (mailing list archive)
State New, archived
Headers show

Commit Message

Mika Kahola May 22, 2015, 8:22 a.m. UTC
From: Ville Syrjälä <ville.syrjala@linux.intel.com>

Add support for changing cdclk frequency during runtime on BDW. The
procedure is quite a bit different on BDW from the one on HSW, so
add a separate function for it.

Also with IPS enabled the actual pixel rate mustn't exceed 95% of cdclk,
so take that into account when computing the max pixel rate.

v2: Grab rps.hw_lock around sandybridge_pcode_write()
v3: Rebase due to power well vs. .global_resources() reordering

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>

v4: Rebased to the latest
v5: Rebased to the latest

Reviewed-by: Mika Kahola <mika.kahola@intel.com>

Author:    Ville Syrjälä <ville.syrjala@linux.intel.com>
---
 drivers/gpu/drm/i915/i915_reg.h      |   1 +
 drivers/gpu/drm/i915/intel_display.c | 139 ++++++++++++++++++++++++++++++-----
 2 files changed, 122 insertions(+), 18 deletions(-)

Comments

Lespiau, Damien May 29, 2015, 11:45 a.m. UTC | #1
On Fri, May 22, 2015 at 11:22:42AM +0300, Mika Kahola wrote:
> From: Ville Syrjälä <ville.syrjala@linux.intel.com>
> 
> Add support for changing cdclk frequency during runtime on BDW. The
> procedure is quite a bit different on BDW from the one on HSW, so
> add a separate function for it.
> 
> Also with IPS enabled the actual pixel rate mustn't exceed 95% of cdclk,
> so take that into account when computing the max pixel rate.
> 
> v2: Grab rps.hw_lock around sandybridge_pcode_write()
> v3: Rebase due to power well vs. .global_resources() reordering
> 
> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
> 
> v4: Rebased to the latest
> v5: Rebased to the latest
> 
> Reviewed-by: Mika Kahola <mika.kahola@intel.com>
> 
> Author:    Ville Syrjälä <ville.syrjala@linux.intel.com>
> ---

(fwiw, I'm making the SKL cdclk code look like those HSW/BDW patches a
bit more. We may want to extract a few low level vfuncs
(set_core_display_clock(), ...) but that's for another time)

Reviewed-by: Damien Lespiau <damien.lespiau@intel.com>

>  drivers/gpu/drm/i915/i915_reg.h      |   1 +
>  drivers/gpu/drm/i915/intel_display.c | 139 ++++++++++++++++++++++++++++++-----
>  2 files changed, 122 insertions(+), 18 deletions(-)
> 
> diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
> index 015fe12..64ec500 100644
> --- a/drivers/gpu/drm/i915/i915_reg.h
> +++ b/drivers/gpu/drm/i915/i915_reg.h
> @@ -6702,6 +6702,7 @@ enum skl_disp_power_wells {
>  #define     GEN6_ENCODE_RC6_VID(mv)		(((mv) - 245) / 5)
>  #define     GEN6_DECODE_RC6_VID(vids)		(((vids) * 5) + 245)
>  #define   HSW_PCODE_DE_WRITE_FREQ_REQ		0x17
> +#define   BDW_PCODE_DISPLAY_FREQ_CHANGE_REQ	0x18
>  #define   GEN9_PCODE_READ_MEM_LATENCY		0x6
>  #define     GEN9_MEM_LATENCY_LEVEL_MASK		0xFF
>  #define     GEN9_MEM_LATENCY_LEVEL_1_5_SHIFT	8
> diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
> index 556d0ec7..71efd2f 100644
> --- a/drivers/gpu/drm/i915/intel_display.c
> +++ b/drivers/gpu/drm/i915/intel_display.c
> @@ -5545,7 +5545,22 @@ static void intel_update_max_cdclk(struct drm_device *dev)
>  {
>  	struct drm_i915_private *dev_priv = dev->dev_private;
>  
> -	if (IS_HASWELL(dev)) {
> +	if (IS_BROADWELL(dev))  {
> +		/*
> +		 * FIXME with extra cooling we can allow
> +		 * 540 MHz for ULX and 675 Mhz for ULT.
> +		 * How can we know if extra cooling is
> +		 * available? PCI ID, VTB, something else?
> +		 */
> +		if (I915_READ(FUSE_STRAP) & HSW_CDCLK_LIMIT)
> +			dev_priv->max_cdclk_freq = 450000;
> +		else if (IS_BDW_ULX(dev))
> +			dev_priv->max_cdclk_freq = 450000;
> +		else if (IS_BDW_ULT(dev))
> +			dev_priv->max_cdclk_freq = 540000;
> +		else
> +			dev_priv->max_cdclk_freq = 675000;
> +	} else if (IS_HASWELL(dev)) {
>  		if (I915_READ(FUSE_STRAP) & HSW_CDCLK_LIMIT)
>  			dev_priv->max_cdclk_freq = 450000;
>  		else if (IS_HSW_ULX(dev))
> @@ -6426,13 +6441,11 @@ static bool pipe_config_supports_ips(struct drm_i915_private *dev_priv,
>  		return true;
>  
>  	/*
> -	 * FIXME if we compare against max we should then
> -	 * increase the cdclk frequency when the current
> -	 * value is too low. The other option is to compare
> -	 * against the cdclk frequency we're going have post
> -	 * modeset (ie. one we computed using other constraints).
> -	 * Need to measure whether using a lower cdclk w/o IPS
> -	 * is better or worse than a higher cdclk w/ IPS.
> +	 * We compare against max which means we must take
> +	 * the increased cdclk requirement into account when
> +	 * calculating the new cdclk.
> +	 *
> +	 * Should measure whether using a lower cdclk w/o IPS
>  	 */
>  	return ilk_pipe_pixel_rate(pipe_config) <=
>  		dev_priv->max_cdclk_freq * 95 / 100;
> @@ -9421,9 +9434,18 @@ static int ilk_max_pixel_rate(struct drm_i915_private *dev_priv)
>  	int max_pixel_rate = 0;
>  
>  	for_each_intel_crtc(dev, crtc) {
> -		if (crtc->new_enabled)
> -			max_pixel_rate = max((int)max_pixel_rate,
> -					     (int)ilk_pipe_pixel_rate(crtc->config));
> +		int pixel_rate;
> +
> +		if (!crtc->new_enabled)
> +			continue;
> +
> +		pixel_rate = ilk_pipe_pixel_rate(crtc->config);
> +
> +		/* pixel rate mustn't exceed 95% of cdclk with IPS on BDW */
> +		if (IS_BROADWELL(dev) && crtc->config->ips_enabled)
> +			pixel_rate = DIV_ROUND_UP(pixel_rate * 100, 95);
> +
> +		max_pixel_rate = max(max_pixel_rate, pixel_rate);
>  	}
>  
>  	return max_pixel_rate;
> @@ -9438,7 +9460,9 @@ static int haswell_calc_cdclk(struct drm_i915_private *dev_priv,
>  	 * FIXME should also account for plane ratio
>  	 * once 64bpp pixel formats are supported.
>  	 */
> -	if (max_pixel_rate > 450000)
> +	if (max_pixel_rate > 540000)
> +		cdclk = 675000;
> +	else if (max_pixel_rate > 450000)
>  		cdclk = 540000;
>  	else if (max_pixel_rate > 337500 || !IS_HSW_ULX(dev_priv))
>  		cdclk = 450000;
> @@ -9503,6 +9527,83 @@ static void haswell_set_cdclk(struct drm_device *dev, int cdclk)
>  	     cdclk, dev_priv->cdclk_freq);
>  }

Quite frankly, I'd split out a broadwell cacl_cdclk out.

>  
> +static void broadwell_set_cdclk(struct drm_device *dev, int cdclk)
> +{
> +	struct drm_i915_private *dev_priv = dev->dev_private;
> +	uint32_t val, data;
> +	int ret;
> +
> +	if (WARN((I915_READ(LCPLL_CTL) &
> +		  (LCPLL_PLL_DISABLE | LCPLL_PLL_LOCK |
> +		   LCPLL_CD_CLOCK_DISABLE | LCPLL_ROOT_CD_CLOCK_DISABLE |
> +		   LCPLL_CD2X_CLOCK_DISABLE | LCPLL_POWER_DOWN_ALLOW |
> +		   LCPLL_CD_SOURCE_FCLK)) != LCPLL_PLL_LOCK,
> +		 "trying to change cdclk frequency with cdclk not enabled\n"))
> +		return;
> +
> +	mutex_lock(&dev_priv->rps.hw_lock);
> +	ret = sandybridge_pcode_write(dev_priv,
> +				      BDW_PCODE_DISPLAY_FREQ_CHANGE_REQ, 0x0);
> +	mutex_unlock(&dev_priv->rps.hw_lock);
> +	if (ret) {
> +		DRM_ERROR("failed to inform pcode about cdclk change\n");
> +		return;
> +	}
> +
> +	val = I915_READ(LCPLL_CTL);
> +	val |= LCPLL_CD_SOURCE_FCLK;
> +	I915_WRITE(LCPLL_CTL, val);
> +
> +	if (wait_for_atomic_us(I915_READ(LCPLL_CTL) &
> +			       LCPLL_CD_SOURCE_FCLK_DONE, 1))
> +		DRM_ERROR("Switching to FCLK failed\n");
> +
> +	val = I915_READ(LCPLL_CTL);
> +	val &= ~LCPLL_CLK_FREQ_MASK;
> +
> +	switch (cdclk) {
> +	case 450000:
> +		val |= LCPLL_CLK_FREQ_450;
> +		data = 0;
> +		break;
> +	case 540000:
> +		val |= LCPLL_CLK_FREQ_54O_BDW;
> +		data = 1;
> +		break;
> +	case 337500:
> +		val |= LCPLL_CLK_FREQ_337_5_BDW;
> +		data = 2;
> +		break;
> +	case 675000:
> +		val |= LCPLL_CLK_FREQ_675_BDW;
> +		data = 3;
> +		break;
> +	default:
> +		WARN(1, "invalid cdclk frequency\n");
> +		return;
> +	}
> +
> +	I915_WRITE(LCPLL_CTL, val);
> +
> +	val = I915_READ(LCPLL_CTL);
> +	val &= ~LCPLL_CD_SOURCE_FCLK;
> +	I915_WRITE(LCPLL_CTL, val);
> +
> +	if (wait_for_atomic_us((I915_READ(LCPLL_CTL) &
> +				LCPLL_CD_SOURCE_FCLK_DONE) == 0, 1))
> +		DRM_ERROR("Switching back to LCPLL failed\n");
> +
> +	mutex_lock(&dev_priv->rps.hw_lock);
> +	sandybridge_pcode_write(dev_priv, HSW_PCODE_DE_WRITE_FREQ_REQ, data);
> +	mutex_unlock(&dev_priv->rps.hw_lock);
> +
> +	intel_update_cdclk(dev);
> +
> +	WARN(cdclk != dev_priv->cdclk_freq,
> +	     "cdclk requested %d kHz but got %d kHz\n",
> +	     cdclk, dev_priv->cdclk_freq);
> +}
> +
>  static int haswell_modeset_global_pipes(struct drm_atomic_state *state)
>  {
>  	struct drm_i915_private *dev_priv = to_i915(state->dev);
> @@ -9542,7 +9643,10 @@ static void haswell_modeset_global_resources(struct drm_atomic_state *state)
>  	int req_cdclk = haswell_calc_cdclk(dev_priv, max_pixel_rate);
>  
>  	if (req_cdclk != dev_priv->cdclk_freq) {
> -		haswell_set_cdclk(dev, req_cdclk);
> +		if (IS_BROADWELL(dev))
> +			broadwell_set_cdclk(dev, req_cdclk);
> +		else
> +			haswell_set_cdclk(dev, req_cdclk);
>  	}
>  }
>  
> @@ -12724,8 +12828,8 @@ static int __intel_set_mode_checks(struct drm_atomic_state *state)
>  	 * mode set on this crtc.  For other crtcs we need to use the
>  	 * adjusted_mode bits in the crtc directly.
>  	 */
> -	if (IS_VALLEYVIEW(dev) || IS_BROXTON(dev) || IS_HASWELL(dev)) {
> -		if (IS_VALLEYVIEW(dev) || IS_BROXTON(dev)) {
> +	if (IS_VALLEYVIEW(dev) || IS_BROXTON(dev) || IS_HASWELL(dev) || IS_BROADWELL(dev)) {
> +		if (IS_VALLEYVIEW(dev) || IS_BROXTON(dev) || IS_BROADWELL(dev)) {
>  			ret = valleyview_modeset_global_pipes(state);
>  			if (ret)
>  				return ret;
> @@ -14616,9 +14720,8 @@ static void intel_init_display(struct drm_device *dev)
>  		dev_priv->display.fdi_link_train = ivb_manual_fdi_link_train;
>  	} else if (IS_HASWELL(dev) || IS_BROADWELL(dev)) {
>  		dev_priv->display.fdi_link_train = hsw_fdi_link_train;
> -		if (IS_HASWELL(dev))
> -			dev_priv->display.modeset_global_resources =
> -				haswell_modeset_global_resources;
> +		dev_priv->display.modeset_global_resources =
> +			haswell_modeset_global_resources;
>  	} else if (IS_VALLEYVIEW(dev)) {
>  		dev_priv->display.modeset_global_resources =
>  			valleyview_modeset_global_resources;
> -- 
> 1.9.1
> 
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx@lists.freedesktop.org
> http://lists.freedesktop.org/mailman/listinfo/intel-gfx
diff mbox

Patch

diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index 015fe12..64ec500 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -6702,6 +6702,7 @@  enum skl_disp_power_wells {
 #define     GEN6_ENCODE_RC6_VID(mv)		(((mv) - 245) / 5)
 #define     GEN6_DECODE_RC6_VID(vids)		(((vids) * 5) + 245)
 #define   HSW_PCODE_DE_WRITE_FREQ_REQ		0x17
+#define   BDW_PCODE_DISPLAY_FREQ_CHANGE_REQ	0x18
 #define   GEN9_PCODE_READ_MEM_LATENCY		0x6
 #define     GEN9_MEM_LATENCY_LEVEL_MASK		0xFF
 #define     GEN9_MEM_LATENCY_LEVEL_1_5_SHIFT	8
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index 556d0ec7..71efd2f 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -5545,7 +5545,22 @@  static void intel_update_max_cdclk(struct drm_device *dev)
 {
 	struct drm_i915_private *dev_priv = dev->dev_private;
 
-	if (IS_HASWELL(dev)) {
+	if (IS_BROADWELL(dev))  {
+		/*
+		 * FIXME with extra cooling we can allow
+		 * 540 MHz for ULX and 675 Mhz for ULT.
+		 * How can we know if extra cooling is
+		 * available? PCI ID, VTB, something else?
+		 */
+		if (I915_READ(FUSE_STRAP) & HSW_CDCLK_LIMIT)
+			dev_priv->max_cdclk_freq = 450000;
+		else if (IS_BDW_ULX(dev))
+			dev_priv->max_cdclk_freq = 450000;
+		else if (IS_BDW_ULT(dev))
+			dev_priv->max_cdclk_freq = 540000;
+		else
+			dev_priv->max_cdclk_freq = 675000;
+	} else if (IS_HASWELL(dev)) {
 		if (I915_READ(FUSE_STRAP) & HSW_CDCLK_LIMIT)
 			dev_priv->max_cdclk_freq = 450000;
 		else if (IS_HSW_ULX(dev))
@@ -6426,13 +6441,11 @@  static bool pipe_config_supports_ips(struct drm_i915_private *dev_priv,
 		return true;
 
 	/*
-	 * FIXME if we compare against max we should then
-	 * increase the cdclk frequency when the current
-	 * value is too low. The other option is to compare
-	 * against the cdclk frequency we're going have post
-	 * modeset (ie. one we computed using other constraints).
-	 * Need to measure whether using a lower cdclk w/o IPS
-	 * is better or worse than a higher cdclk w/ IPS.
+	 * We compare against max which means we must take
+	 * the increased cdclk requirement into account when
+	 * calculating the new cdclk.
+	 *
+	 * Should measure whether using a lower cdclk w/o IPS
 	 */
 	return ilk_pipe_pixel_rate(pipe_config) <=
 		dev_priv->max_cdclk_freq * 95 / 100;
@@ -9421,9 +9434,18 @@  static int ilk_max_pixel_rate(struct drm_i915_private *dev_priv)
 	int max_pixel_rate = 0;
 
 	for_each_intel_crtc(dev, crtc) {
-		if (crtc->new_enabled)
-			max_pixel_rate = max((int)max_pixel_rate,
-					     (int)ilk_pipe_pixel_rate(crtc->config));
+		int pixel_rate;
+
+		if (!crtc->new_enabled)
+			continue;
+
+		pixel_rate = ilk_pipe_pixel_rate(crtc->config);
+
+		/* pixel rate mustn't exceed 95% of cdclk with IPS on BDW */
+		if (IS_BROADWELL(dev) && crtc->config->ips_enabled)
+			pixel_rate = DIV_ROUND_UP(pixel_rate * 100, 95);
+
+		max_pixel_rate = max(max_pixel_rate, pixel_rate);
 	}
 
 	return max_pixel_rate;
@@ -9438,7 +9460,9 @@  static int haswell_calc_cdclk(struct drm_i915_private *dev_priv,
 	 * FIXME should also account for plane ratio
 	 * once 64bpp pixel formats are supported.
 	 */
-	if (max_pixel_rate > 450000)
+	if (max_pixel_rate > 540000)
+		cdclk = 675000;
+	else if (max_pixel_rate > 450000)
 		cdclk = 540000;
 	else if (max_pixel_rate > 337500 || !IS_HSW_ULX(dev_priv))
 		cdclk = 450000;
@@ -9503,6 +9527,83 @@  static void haswell_set_cdclk(struct drm_device *dev, int cdclk)
 	     cdclk, dev_priv->cdclk_freq);
 }
 
+static void broadwell_set_cdclk(struct drm_device *dev, int cdclk)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	uint32_t val, data;
+	int ret;
+
+	if (WARN((I915_READ(LCPLL_CTL) &
+		  (LCPLL_PLL_DISABLE | LCPLL_PLL_LOCK |
+		   LCPLL_CD_CLOCK_DISABLE | LCPLL_ROOT_CD_CLOCK_DISABLE |
+		   LCPLL_CD2X_CLOCK_DISABLE | LCPLL_POWER_DOWN_ALLOW |
+		   LCPLL_CD_SOURCE_FCLK)) != LCPLL_PLL_LOCK,
+		 "trying to change cdclk frequency with cdclk not enabled\n"))
+		return;
+
+	mutex_lock(&dev_priv->rps.hw_lock);
+	ret = sandybridge_pcode_write(dev_priv,
+				      BDW_PCODE_DISPLAY_FREQ_CHANGE_REQ, 0x0);
+	mutex_unlock(&dev_priv->rps.hw_lock);
+	if (ret) {
+		DRM_ERROR("failed to inform pcode about cdclk change\n");
+		return;
+	}
+
+	val = I915_READ(LCPLL_CTL);
+	val |= LCPLL_CD_SOURCE_FCLK;
+	I915_WRITE(LCPLL_CTL, val);
+
+	if (wait_for_atomic_us(I915_READ(LCPLL_CTL) &
+			       LCPLL_CD_SOURCE_FCLK_DONE, 1))
+		DRM_ERROR("Switching to FCLK failed\n");
+
+	val = I915_READ(LCPLL_CTL);
+	val &= ~LCPLL_CLK_FREQ_MASK;
+
+	switch (cdclk) {
+	case 450000:
+		val |= LCPLL_CLK_FREQ_450;
+		data = 0;
+		break;
+	case 540000:
+		val |= LCPLL_CLK_FREQ_54O_BDW;
+		data = 1;
+		break;
+	case 337500:
+		val |= LCPLL_CLK_FREQ_337_5_BDW;
+		data = 2;
+		break;
+	case 675000:
+		val |= LCPLL_CLK_FREQ_675_BDW;
+		data = 3;
+		break;
+	default:
+		WARN(1, "invalid cdclk frequency\n");
+		return;
+	}
+
+	I915_WRITE(LCPLL_CTL, val);
+
+	val = I915_READ(LCPLL_CTL);
+	val &= ~LCPLL_CD_SOURCE_FCLK;
+	I915_WRITE(LCPLL_CTL, val);
+
+	if (wait_for_atomic_us((I915_READ(LCPLL_CTL) &
+				LCPLL_CD_SOURCE_FCLK_DONE) == 0, 1))
+		DRM_ERROR("Switching back to LCPLL failed\n");
+
+	mutex_lock(&dev_priv->rps.hw_lock);
+	sandybridge_pcode_write(dev_priv, HSW_PCODE_DE_WRITE_FREQ_REQ, data);
+	mutex_unlock(&dev_priv->rps.hw_lock);
+
+	intel_update_cdclk(dev);
+
+	WARN(cdclk != dev_priv->cdclk_freq,
+	     "cdclk requested %d kHz but got %d kHz\n",
+	     cdclk, dev_priv->cdclk_freq);
+}
+
 static int haswell_modeset_global_pipes(struct drm_atomic_state *state)
 {
 	struct drm_i915_private *dev_priv = to_i915(state->dev);
@@ -9542,7 +9643,10 @@  static void haswell_modeset_global_resources(struct drm_atomic_state *state)
 	int req_cdclk = haswell_calc_cdclk(dev_priv, max_pixel_rate);
 
 	if (req_cdclk != dev_priv->cdclk_freq) {
-		haswell_set_cdclk(dev, req_cdclk);
+		if (IS_BROADWELL(dev))
+			broadwell_set_cdclk(dev, req_cdclk);
+		else
+			haswell_set_cdclk(dev, req_cdclk);
 	}
 }
 
@@ -12724,8 +12828,8 @@  static int __intel_set_mode_checks(struct drm_atomic_state *state)
 	 * mode set on this crtc.  For other crtcs we need to use the
 	 * adjusted_mode bits in the crtc directly.
 	 */
-	if (IS_VALLEYVIEW(dev) || IS_BROXTON(dev) || IS_HASWELL(dev)) {
-		if (IS_VALLEYVIEW(dev) || IS_BROXTON(dev)) {
+	if (IS_VALLEYVIEW(dev) || IS_BROXTON(dev) || IS_HASWELL(dev) || IS_BROADWELL(dev)) {
+		if (IS_VALLEYVIEW(dev) || IS_BROXTON(dev) || IS_BROADWELL(dev)) {
 			ret = valleyview_modeset_global_pipes(state);
 			if (ret)
 				return ret;
@@ -14616,9 +14720,8 @@  static void intel_init_display(struct drm_device *dev)
 		dev_priv->display.fdi_link_train = ivb_manual_fdi_link_train;
 	} else if (IS_HASWELL(dev) || IS_BROADWELL(dev)) {
 		dev_priv->display.fdi_link_train = hsw_fdi_link_train;
-		if (IS_HASWELL(dev))
-			dev_priv->display.modeset_global_resources =
-				haswell_modeset_global_resources;
+		dev_priv->display.modeset_global_resources =
+			haswell_modeset_global_resources;
 	} else if (IS_VALLEYVIEW(dev)) {
 		dev_priv->display.modeset_global_resources =
 			valleyview_modeset_global_resources;