new file mode 100644
@@ -0,0 +1,433 @@
+/*
+ * Copyright (c) 2014 Intel Corporation. All rights reserved.
+ *
+ * This software is available to you under a choice of one of two
+ * licenses. You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the
+ * OpenIB.org BSD license below:
+ *
+ * Redistribution and use in source and binary forms, with or
+ * without modification, are permitted provided that the following
+ * conditions are met:
+ *
+ * - Redistributions of source code must retain the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer.
+ *
+ * - Redistributions in binary form must reproduce the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer in the documentation and/or other materials
+ * provided with the distribution.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+
+#if !defined(OPA_PORT_INFO_H)
+#define OPA_PORT_INFO_H
+
+/* Temporary until HFI driver is updated */
+#ifndef USE_PI_LED_ENABLE
+#define USE_PI_LED_ENABLE 0
+#endif
+
+#define OPA_PORT_LINK_MODE_NOP 0 /* No change */
+#define OPA_PORT_LINK_MODE_OPA 4 /* Port mode is OPA */
+
+#define OPA_PORT_PACKET_FORMAT_NOP 0 /* No change */
+#define OPA_PORT_PACKET_FORMAT_8B 1 /* Format 8B */
+#define OPA_PORT_PACKET_FORMAT_9B 2 /* Format 9B */
+#define OPA_PORT_PACKET_FORMAT_10B 4 /* Format 10B */
+#define OPA_PORT_PACKET_FORMAT_16B 8 /* Format 16B */
+
+#define OPA_PORT_LTP_CRC_MODE_NONE 0 /* No change */
+#define OPA_PORT_LTP_CRC_MODE_14 1 /* 14-bit LTP CRC mode (optional) */
+#define OPA_PORT_LTP_CRC_MODE_16 2 /* 16-bit LTP CRC mode */
+#define OPA_PORT_LTP_CRC_MODE_48 4 /* 48-bit LTP CRC mode (optional) */
+#define OPA_PORT_LTP_CRC_MODE_PER_LANE 8 /* 12/16-bit per lane LTP CRC mode */
+
+/* Link Down / Neighbor Link Down Reason; indicated as follows: */
+#define OPA_LINKDOWN_REASON_NONE 0 /* No specified reason */
+#define OPA_LINKDOWN_REASON_RCV_ERROR_0 1
+#define OPA_LINKDOWN_REASON_BAD_PKT_LEN 2
+#define OPA_LINKDOWN_REASON_PKT_TOO_LONG 3
+#define OPA_LINKDOWN_REASON_PKT_TOO_SHORT 4
+#define OPA_LINKDOWN_REASON_BAD_SLID 5
+#define OPA_LINKDOWN_REASON_BAD_DLID 6
+#define OPA_LINKDOWN_REASON_BAD_L2 7
+#define OPA_LINKDOWN_REASON_BAD_SC 8
+#define OPA_LINKDOWN_REASON_RCV_ERROR_8 9
+#define OPA_LINKDOWN_REASON_BAD_MID_TAIL 10
+#define OPA_LINKDOWN_REASON_RCV_ERROR_10 11
+#define OPA_LINKDOWN_REASON_PREEMPT_ERROR 12
+#define OPA_LINKDOWN_REASON_PREEMPT_VL15 13
+#define OPA_LINKDOWN_REASON_BAD_VL_MARKER 14
+#define OPA_LINKDOWN_REASON_RCV_ERROR_14 15
+#define OPA_LINKDOWN_REASON_RCV_ERROR_15 16
+#define OPA_LINKDOWN_REASON_BAD_HEAD_DIST 17
+#define OPA_LINKDOWN_REASON_BAD_TAIL_DIST 18
+#define OPA_LINKDOWN_REASON_BAD_CTRL_DIST 19
+#define OPA_LINKDOWN_REASON_BAD_CREDIT_ACK 20
+#define OPA_LINKDOWN_REASON_UNSUPPORTED_VL_MARKER 21
+#define OPA_LINKDOWN_REASON_BAD_PREEMPT 22
+#define OPA_LINKDOWN_REASON_BAD_CONTROL_FLIT 23
+#define OPA_LINKDOWN_REASON_EXCEED_MULTICAST_LIMIT 24
+#define OPA_LINKDOWN_REASON_RCV_ERROR_24 25
+#define OPA_LINKDOWN_REASON_RCV_ERROR_25 26
+#define OPA_LINKDOWN_REASON_RCV_ERROR_26 27
+#define OPA_LINKDOWN_REASON_RCV_ERROR_27 28
+#define OPA_LINKDOWN_REASON_RCV_ERROR_28 29
+#define OPA_LINKDOWN_REASON_RCV_ERROR_29 30
+#define OPA_LINKDOWN_REASON_RCV_ERROR_30 31
+#define OPA_LINKDOWN_REASON_EXCESSIVE_BUFFER_OVERRUN 32
+#define OPA_LINKDOWN_REASON_UNKNOWN 33
+/* 34 -reserved */
+#define OPA_LINKDOWN_REASON_REBOOT 35
+#define OPA_LINKDOWN_REASON_NEIGHBOR_UNKNOWN 36
+/* 37-38 reserved */
+#define OPA_LINKDOWN_REASON_FM_BOUNCE 39
+#define OPA_LINKDOWN_REASON_SPEED_POLICY 40
+#define OPA_LINKDOWN_REASON_WIDTH_POLICY 41
+/* 42-48 reserved */
+#define OPA_LINKDOWN_REASON_DISCONNECTED 49
+#define OPA_LINKDOWN_REASONLOCAL_MEDIA_NOT_INSTALLED 50
+#define OPA_LINKDOWN_REASON_NOT_INSTALLED 51
+#define OPA_LINKDOWN_REASON_CHASSIS_CONFIG 52
+/* 53 reserved */
+#define OPA_LINKDOWN_REASON_END_TO_END_NOT_INSTALLED 54
+/* 55 reserved */
+#define OPA_LINKDOWN_REASON_POWER_POLICY 56
+#define OPA_LINKDOWN_REASON_LINKSPEED_POLICY 57
+#define OPA_LINKDOWN_REASON_LINKWIDTH_POLICY 58
+/* 59 reserved */
+#define OPA_LINKDOWN_REASON_SWITCH_MGMT 60
+#define OPA_LINKDOWN_REASON_SMA_DISABLED 61
+/* 62 reserved */
+#define OPA_LINKDOWN_REASON_TRANSIENT 63
+/* 64-255 reserved */
+
+/* OPA Link Init reason; indicated as follows: */
+/* 3-7; 11-15 reserved; 8-15 cleared on Polling->LinkUp */
+#define OPA_LINKINIT_REASON_NOP 0
+#define OPA_LINKINIT_REASON_LINKUP (1 << 4)
+#define OPA_LINKINIT_REASON_FLAPPING (2 << 4)
+#define OPA_LINKINIT_REASON_CLEAR (8 << 4)
+#define OPA_LINKINIT_OUTSIDE_POLICY (8 << 4)
+#define OPA_LINKINIT_QUARANTINED (9 << 4)
+#define OPA_LINKINIT_INSUFIC_CAPABILITY (10 << 4)
+
+#define OPA_LINK_SPEED_NOP 0x0000 /* Reserved (1-5 Gbps) */
+#define OPA_LINK_SPEED_12_5G 0x0001 /* 12.5 Gbps */
+#define OPA_LINK_SPEED_25G 0x0002 /* 25.78125? Gbps (EDR) */
+
+#define OPA_LINK_WIDTH_1X 0x0001
+#define OPA_LINK_WIDTH_2X 0x0002
+#define OPA_LINK_WIDTH_3X 0x0004
+#define OPA_LINK_WIDTH_4X 0x0008
+
+#define OPA_CAP_MASK3_IsSnoopSupported (1 << 7)
+#define OPA_CAP_MASK3_IsAsyncSC2VLSupported (1 << 6)
+#define OPA_CAP_MASK3_IsAddrRangeConfigSupported (1 << 5)
+#define OPA_CAP_MASK3_IsPassThroughSupported (1 << 4)
+#define OPA_CAP_MASK3_IsSharedSpaceSupported (1 << 3)
+/* reserved (1 << 2) */
+#define OPA_CAP_MASK3_IsVLMarkerSupported (1 << 1)
+#define OPA_CAP_MASK3_IsVLrSupported (1 << 0)
+
+/**
+ * new MTU values
+ */
+enum {
+ OPA_MTU_8192 = 6,
+ OPA_MTU_10240 = 7,
+};
+
+enum {
+ OPA_PORT_PHYS_CONF_DISCONNECTED = 0,
+ OPA_PORT_PHYS_CONF_STANDARD = 1,
+ OPA_PORT_PHYS_CONF_FIXED = 2,
+ OPA_PORT_PHYS_CONF_VARIABLE = 3,
+ OPA_PORT_PHYS_CONF_SI_PHOTO = 4
+};
+
+enum port_info_field_masks {
+ /* vl.cap */
+ OPA_PI_MASK_VL_CAP = 0x1F,
+ /* port_states.ledenable_offlinereason */
+ OPA_PI_MASK_OFFLINE_REASON = 0x0F,
+ OPA_PI_MASK_LED_ENABLE = 0x40,
+ /* port_states.unsleepstate_downdefstate */
+ OPA_PI_MASK_UNSLEEP_STATE = 0xF0,
+ OPA_PI_MASK_DOWNDEF_STATE = 0x0F,
+ /* port_states.portphysstate_portstate */
+ OPA_PI_MASK_PORT_PHYSICAL_STATE = 0xF0,
+ OPA_PI_MASK_PORT_STATE = 0x0F,
+ /* port_phys_conf */
+ OPA_PI_MASK_PORT_PHYSICAL_CONF = 0x0F,
+ /* collectivemask_multicastmask */
+ OPA_PI_MASK_COLLECT_MASK = 0x38,
+ OPA_PI_MASK_MULTICAST_MASK = 0x07,
+ /* mkeyprotect_lmc */
+ OPA_PI_MASK_MKEY_PROT_BIT = 0xC0,
+ OPA_PI_MASK_LMC = 0x0F,
+ /* smsl */
+ OPA_PI_MASK_SMSL = 0x1F,
+ /* partenforce_filterraw */
+ /* Filter Raw In/Out bits 1 and 2 were removed */
+ OPA_PI_MASK_LINKINIT_REASON = 0xF0,
+ OPA_PI_MASK_PARTITION_ENFORCE_IN = 0x08,
+ OPA_PI_MASK_PARTITION_ENFORCE_OUT = 0x04,
+ /* operational_vls */
+ OPA_PI_MASK_OPERATIONAL_VL = 0x1F,
+ /* sa_qp */
+ OPA_PI_MASK_SA_QP = 0x00FFFFFF,
+ /* sm_trap_qp */
+ OPA_PI_MASK_SM_TRAP_QP = 0x00FFFFFF,
+ /* localphy_overrun_errors */
+ OPA_PI_MASK_LOCAL_PHY_ERRORS = 0xF0,
+ OPA_PI_MASK_OVERRUN_ERRORS = 0x0F,
+ /* clientrereg_subnettimeout */
+ OPA_PI_MASK_CLIENT_REREGISTER = 0x80,
+ OPA_PI_MASK_SUBNET_TIMEOUT = 0x1F,
+ /* port_link_mode */
+ OPA_PI_MASK_PORT_LINK_SUPPORTED = (0x001F << 10),
+ OPA_PI_MASK_PORT_LINK_ENABLED = (0x001F << 5),
+ OPA_PI_MASK_PORT_LINK_ACTIVE = (0x001F << 0),
+ /* port_link_crc_mode */
+ OPA_PI_MASK_PORT_LINK_CRC_SUPPORTED = 0x0F00,
+ OPA_PI_MASK_PORT_LINK_CRC_ENABLED = 0x00F0,
+ OPA_PI_MASK_PORT_LINK_CRC_ACTIVE = 0x000F,
+ /* port_mode */
+ OPA_PI_MASK_PORT_MODE_SECURITY_CHECK = 0x0001,
+ OPA_PI_MASK_PORT_MODE_16B_TRAP_QUERY = 0x0002,
+ OPA_PI_MASK_PORT_MODE_PKEY_CONVERT = 0x0004,
+ OPA_PI_MASK_PORT_MODE_SC2SC_MAPPING = 0x0008,
+ OPA_PI_MASK_PORT_MODE_VL_MARKER = 0x0010,
+ OPA_PI_MASK_PORT_PASS_THROUGH = 0x0020,
+ OPA_PI_MASK_PORT_ACTIVE_OPTOMIZE = 0x0040,
+ /* flit_control.interleave */
+ OPA_PI_MASK_INTERLEAVE_DIST_SUP = (0x0003 << 12),
+ OPA_PI_MASK_INTERLEAVE_DIST_ENABLE = (0x0003 << 10),
+ OPA_PI_MASK_INTERLEAVE_MAX_NEST_TX = (0x001F << 5),
+ OPA_PI_MASK_INTERLEAVE_MAX_NEST_RX = (0x001F << 0),
+
+ /* port_error_action */
+ OPA_PI_MASK_EX_BUFFER_OVERRUN = 0x80000000,
+ /* 7 bits reserved */
+ OPA_PI_MASK_FM_CFG_ERR_EXCEED_MULTICAST_LIMIT = 0x00800000,
+ OPA_PI_MASK_FM_CFG_BAD_CONTROL_FLIT = 0x00400000,
+ OPA_PI_MASK_FM_CFG_BAD_PREEMPT = 0x00200000,
+ OPA_PI_MASK_FM_CFG_UNSUPPORTED_VL_MARKER = 0x00100000,
+ OPA_PI_MASK_FM_CFG_BAD_CRDT_ACK = 0x00080000,
+ OPA_PI_MASK_FM_CFG_BAD_CTRL_DIST = 0x00040000,
+ OPA_PI_MASK_FM_CFG_BAD_TAIL_DIST = 0x00020000,
+ OPA_PI_MASK_FM_CFG_BAD_HEAD_DIST = 0x00010000,
+ /* 2 bits reserved */
+ OPA_PI_MASK_PORT_RCV_BAD_VL_MARKER = 0x00002000,
+ OPA_PI_MASK_PORT_RCV_PREEMPT_VL15 = 0x00001000,
+ OPA_PI_MASK_PORT_RCV_PREEMPT_ERROR = 0x00000800,
+ /* 1 bit reserved */
+ OPA_PI_MASK_PORT_RCV_BAD_MidTail = 0x00000200,
+ /* 1 bit reserved */
+ OPA_PI_MASK_PORT_RCV_BAD_SC = 0x00000080,
+ OPA_PI_MASK_PORT_RCV_BAD_L2 = 0x00000040,
+ OPA_PI_MASK_PORT_RCV_BAD_DLID = 0x00000020,
+ OPA_PI_MASK_PORT_RCV_BAD_SLID = 0x00000010,
+ OPA_PI_MASK_PORT_RCV_PKTLEN_TOOSHORT = 0x00000008,
+ OPA_PI_MASK_PORT_RCV_PKTLEN_TOOLONG = 0x00000004,
+ OPA_PI_MASK_PORT_RCV_BAD_PKTLEN = 0x00000002,
+ OPA_PI_MASK_PORT_RCV_BAD_LT = 0x00000001,
+
+ /* pass_through.res_drctl */
+ OPA_PI_MASK_PASS_THROUGH_DR_CONTROL = 0x01,
+
+ /* buffer_units */
+ OPA_PI_MASK_BUF_UNIT_VL15_INIT = (0x00000FFF << 11),
+ OPA_PI_MASK_BUF_UNIT_VL15_CREDIT_RATE = (0x0000001F << 6),
+ OPA_PI_MASK_BUF_UNIT_CREDIT_ACK = (0x00000003 << 3),
+ OPA_PI_MASK_BUF_UNIT_BUF_ALLOC = (0x00000003 << 0),
+
+ /* neigh_mtu.pvlx_to_mtu */
+ OPA_PI_MASK_NEIGH_MTU_PVL0 = 0xF0,
+ OPA_PI_MASK_NEIGH_MTU_PVL1 = 0x0F,
+
+ /* neigh_mtu.vlstall_hoq_life */
+ OPA_PI_MASK_VL_STALL = (0x03 << 5),
+ OPA_PI_MASK_HOQ_LIFE = (0x1F << 0),
+
+ /* port_neigh_mode */
+ OPA_PI_MASK_NEIGH_MGMT_ALLOWED = (0x01 << 3),
+ OPA_PI_MASK_NEIGH_FW_AUTH_BYPASS = (0x01 << 2),
+ OPA_PI_MASK_NEIGH_NODE_TYPE = (0x03 << 0),
+
+ /* resptime_value */
+ OPA_PI_MASK_RESPONSE_TIME_VALUE = 0x1F,
+
+ /* mtucap */
+ OPA_PI_MASK_MTU_CAP = 0x0F,
+};
+
+#if USE_PI_LED_ENABLE
+struct opa_port_states {
+ u8 reserved;
+ u8 ledenable_offlinereason; /* 1 res, 1 bit, 6 bits */
+ u8 reserved2;
+ u8 portphysstate_portstate; /* 4 bits, 4 bits */
+};
+#define PI_LED_ENABLE_SUP 1
+#else
+struct opa_port_states {
+ u8 reserved;
+ u8 offline_reason; /* 2 res, 6 bits */
+ u8 reserved2;
+ u8 portphysstate_portstate; /* 4 bits, 4 bits */
+};
+#define PI_LED_ENABLE_SUP 0
+#endif
+
+struct opa_port_state_info {
+ struct opa_port_states port_states;
+ u16 link_width_downgrade_tx_active;
+ u16 link_width_downgrade_rx_active;
+};
+
+struct opa_port_info {
+ __be32 lid;
+ __be32 flow_control_mask;
+
+ struct {
+ u8 res; /* was inittype */
+ u8 cap; /* 3 res, 5 bits */
+ __be16 high_limit;
+ __be16 preempt_limit;
+ u8 arb_high_cap;
+ u8 arb_low_cap;
+ } vl;
+
+ struct opa_port_states port_states;
+ u8 port_phys_conf; /* 4 res, 4 bits */
+ u8 collectivemask_multicastmask; /* 2 res, 3, 3 */
+ u8 mkeyprotect_lmc; /* 2 bits, 2 res, 4 bits */
+ u8 smsl; /* 3 res, 5 bits */
+
+ u8 partenforce_filterraw; /* bit fields */
+ u8 operational_vls; /* 3 res, 5 bits */
+ __be16 pkey_8b;
+ __be16 pkey_10b;
+ __be16 mkey_violations;
+
+ __be16 pkey_violations;
+ __be16 qkey_violations;
+ __be32 sm_trap_qp; /* 8 bits, 24 bits */
+
+ __be32 sa_qp; /* 8 bits, 24 bits */
+ u8 neigh_port_num;
+ u8 link_down_reason;
+ u8 neigh_link_down_reason;
+ u8 clientrereg_subnettimeout; /* 1 bit, 2 bits, 5 */
+
+ struct {
+ __be16 supported;
+ __be16 enabled;
+ __be16 active;
+ } link_speed;
+ struct {
+ __be16 supported;
+ __be16 enabled;
+ __be16 active;
+ } link_width;
+ struct {
+ __be16 supported;
+ __be16 enabled;
+ __be16 tx_active;
+ __be16 rx_active;
+ } link_width_downgrade;
+ __be16 port_link_mode; /* 1 res, 5 bits, 5 bits, 5 bits */
+ __be16 port_ltp_crc_mode; /* 4 res, 4 bits, 4 bits, 4 bits */
+
+ __be16 port_mode; /* 9 res, bit fields */
+ struct {
+ __be16 supported;
+ __be16 enabled;
+ } port_packet_format;
+ struct {
+ __be16 interleave; /* 2 res, 2,2,5,5 */
+ struct {
+ __be16 min_initial;
+ __be16 min_tail;
+ u8 large_pkt_limit;
+ u8 small_pkt_limit;
+ u8 max_small_pkt_limit;
+ u8 preemption_limit;
+ } preemption;
+ } flit_control;
+
+ __be32 reserved4;
+ __be32 port_error_action; /* bit field */
+
+ struct {
+ u8 egress_port;
+ u8 res_drctl; /* 7 res, 1 */
+ } pass_through;
+ __be16 mkey_lease_period;
+ __be32 buffer_units; /* 9 res, 12, 5, 3, 3 */
+
+ __be32 reserved5;
+ __be32 sm_lid;
+
+ __be64 mkey;
+
+ __be64 subnet_prefix;
+
+ struct {
+ u8 pvlx_to_mtu[OPA_MAX_VLS/2]; /* 4 bits, 4 bits */
+ } neigh_mtu;
+
+ struct {
+ u8 vlstall_hoqlife; /* 3 bits, 5 bits */
+ } xmit_q[OPA_MAX_VLS];
+
+ struct {
+ u8 addr[16];
+ } ipaddr_ipv6;
+
+ struct {
+ u8 addr[4];
+ } ipaddr_ipv4;
+
+ u32 reserved6;
+ u32 reserved7;
+ u32 reserved8;
+
+ __be64 neigh_node_guid;
+
+ __be32 ib_cap_mask;
+ __be16 reserved9; /* was ib_cap_mask2 */
+ __be16 opa_cap_mask;
+
+ __be32 reserved10; /* was link_roundtrip_latency */
+ __be16 overall_buffer_space;
+ __be16 reserved11; /* was max_credit_hint */
+
+ __be16 diag_code;
+ struct {
+ u8 buffer;
+ u8 wire;
+ } replay_depth;
+ u8 port_neigh_mode;
+ u8 mtucap; /* 4 res, 4 bits */
+
+ u8 resptimevalue; /* 3 res, 5 bits */
+ u8 local_port_num;
+ u8 reserved12;
+ u8 reserved13; /* was guid_cap */
+} __attribute__ ((packed));
+
+#endif /* OPA_PORT_INFO_H */
@@ -40,6 +40,10 @@
#define OPA_SMP_DR_DATA_SIZE 1872
#define OPA_SMP_MAX_PATH_HOPS 64
+#define OPA_MAX_VLS 32
+#define OPA_MAX_SLS 32
+#define OPA_MAX_SCS 32
+
#define OPA_SMI_CLASS_VERSION 0x80
#define OPA_LID_PERMISSIVE cpu_to_be32(0xFFFFFFFF)
@@ -73,6 +77,49 @@ struct opa_smp {
} __packed;
+/* Subnet management attributes */
+/* ... */
+#define OPA_ATTRIB_ID_NODE_DESCRIPTION cpu_to_be16(0x0010)
+#define OPA_ATTRIB_ID_NODE_INFO cpu_to_be16(0x0011)
+#define OPA_ATTRIB_ID_PORT_INFO cpu_to_be16(0x0015)
+#define OPA_ATTRIB_ID_PARTITION_TABLE cpu_to_be16(0x0016)
+#define OPA_ATTRIB_ID_SL_TO_SC_MAP cpu_to_be16(0x0017)
+#define OPA_ATTRIB_ID_VL_ARBITRATION cpu_to_be16(0x0018)
+#define OPA_ATTRIB_ID_SM_INFO cpu_to_be16(0x0020)
+#define OPA_ATTRIB_ID_CABLE_INFO cpu_to_be16(0x0032)
+#define OPA_ATTRIB_ID_AGGREGATE cpu_to_be16(0x0080)
+#define OPA_ATTRIB_ID_SC_TO_SL_MAP cpu_to_be16(0x0082)
+#define OPA_ATTRIB_ID_SC_TO_VLR_MAP cpu_to_be16(0x0083)
+#define OPA_ATTRIB_ID_SC_TO_VLT_MAP cpu_to_be16(0x0084)
+#define OPA_ATTRIB_ID_SC_TO_VLNT_MAP cpu_to_be16(0x0085)
+/* ... */
+#define OPA_ATTRIB_ID_PORT_STATE_INFO cpu_to_be16(0x0087)
+/* ... */
+#define OPA_ATTRIB_ID_BUFFER_CONTROL_TABLE cpu_to_be16(0x008A)
+/* ... */
+
+struct opa_node_description {
+ u8 data[64];
+} __attribute__ ((packed));
+
+struct opa_node_info {
+ u8 base_version;
+ u8 class_version;
+ u8 node_type;
+ u8 num_ports;
+ __be32 reserved;
+ __be64 system_image_guid;
+ __be64 node_guid;
+ __be64 port_guid;
+ __be16 partition_cap;
+ __be16 device_id;
+ __be32 revision;
+ u8 local_port_num;
+ u8 vendor_id[3]; /* network byte order */
+} __attribute__ ((packed));
+
+#define OPA_PARTITION_TABLE_BLK_SIZE 32
+
static inline u8
opa_get_smp_direction(struct opa_smp *smp)
{
new file mode 100644
@@ -0,0 +1,427 @@
+/*
+ *
+ * This file is provided under a dual BSD/GPLv2 license. When using or
+ * redistributing this file, you may do so under either license.
+ *
+ * GPL LICENSE SUMMARY
+ *
+ * Copyright(c) 2015 Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * BSD LICENSE
+ *
+ * Copyright(c) 2015 Intel Corporation.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * - Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * - Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * - Neither the name of Intel Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ */
+
+/*
+ * This file contains defines, structures, etc. that are used
+ * to communicate between kernel and user code.
+ */
+
+#ifndef _LINUX__HFI1_USER_H
+#define _LINUX__HFI1_USER_H
+
+#include <linux/types.h>
+
+/*
+ * This version number is given to the driver by the user code during
+ * initialization in the spu_userversion field of hfi1_user_info, so
+ * the driver can check for compatibility with user code.
+ *
+ * The major version changes when data structures change in an incompatible
+ * way. The driver must be the same for initialization to succeed.
+ */
+#define HFI1_USER_SWMAJOR 4
+
+/*
+ * Minor version differences are always compatible
+ * a within a major version, however if user software is larger
+ * than driver software, some new features and/or structure fields
+ * may not be implemented; the user code must deal with this if it
+ * cares, or it must abort after initialization reports the difference.
+ */
+#define HFI1_USER_SWMINOR 0
+
+/*
+ * Set of HW and driver capability/feature bits.
+ * These bit values are used to configure enabled/disabled HW and
+ * driver features. The same set of bits are communicated to user
+ * space.
+ */
+#define HFI1_CAP_DMA_RTAIL (1UL << 0) /* Use DMA'ed RTail value */
+#define HFI1_CAP_SDMA (1UL << 1) /* Enable SDMA support */
+#define HFI1_CAP_SDMA_AHG (1UL << 2) /* Enable SDMA AHG support */
+#define HFI1_CAP_EXTENDED_PSN (1UL << 3) /* Enable Extended PSN support */
+#define HFI1_CAP_HDRSUPP (1UL << 4) /* Enable Header Suppression */
+#define HFI1_CAP_ENABLE_SMA (1UL << 5) /* Enable driver SM Agent */
+#define HFI1_CAP_USE_SDMA_HEAD (1UL << 6) /* DMA Hdr Q tail vs. use CSR */
+#define HFI1_CAP_MULTI_PKT_EGR (1UL << 7) /* Enable multi-packet Egr buffs*/
+#define HFI1_CAP_NODROP_RHQ_FULL (1UL << 8) /* Don't drop on Hdr Q full */
+#define HFI1_CAP_NODROP_EGR_FULL (1UL << 9) /* Don't drop on EGR buffs full */
+#define HFI1_CAP_TID_UNMAP (1UL << 10) /* Enable Expected TID caching */
+#define HFI1_CAP_PRINT_UNIMPL (1UL << 11) /* Show for unimplemented feats */
+#define HFI1_CAP_ALLOW_PERM_JKEY (1UL << 12) /* Allow use of permissive JKEY */
+#define HFI1_CAP_NO_INTEGRITY (1UL << 13) /* Enable ctxt integrity checks */
+#define HFI1_CAP_PKEY_CHECK (1UL << 14) /* Enable ctxt PKey checking */
+#define HFI1_CAP_STATIC_RATE_CTRL (1UL << 15) /* Allow PBC.StaticRateControl */
+#define HFI1_CAP_QSFP_ENABLED (1UL << 16) /* Enable QSFP check during LNI */
+#define HFI1_CAP_SDMA_HEAD_CHECK (1UL << 17) /* SDMA head checking */
+#define HFI1_CAP_EARLY_CREDIT_RETURN (1UL << 18) /* early credit return */
+
+#define HFI1_RCVHDR_ENTSIZE_2 (1UL << 0)
+#define HFI1_RCVHDR_ENTSIZE_16 (1UL << 1)
+#define HFI1_RCVDHR_ENTSIZE_32 (1UL << 2)
+
+/*
+ * If the unit is specified via open, HCA choice is fixed. If port is
+ * specified, it's also fixed. Otherwise we try to spread contexts
+ * across ports and HCAs, using different algorithms. WITHIN is
+ * the old default, prior to this mechanism.
+ */
+#define HFI1_ALG_ACROSS 0 /* round robin contexts across HCAs, then
+ * ports; this is the default */
+#define HFI1_ALG_WITHIN 1 /* use all contexts on an HCA (round robin
+ * active ports within), then next HCA */
+#define HFI1_ALG_COUNT 2 /* number of algorithm choices */
+
+
+/* User commands. */
+#define HFI1_CMD_ASSIGN_CTXT 1 /* allocate HCA and context */
+#define HFI1_CMD_CTXT_INFO 2 /* find out what resources we got */
+#define HFI1_CMD_USER_INFO 3 /* set up userspace */
+#define HFI1_CMD_TID_UPDATE 4 /* update expected TID entries */
+#define HFI1_CMD_TID_FREE 5 /* free expected TID entries */
+#define HFI1_CMD_CREDIT_UPD 6 /* force an update of PIO credit */
+#define HFI1_CMD_SDMA_STATUS_UPD 7 /* force update of SDMA status ring */
+
+#define HFI1_CMD_RECV_CTRL 8 /* control receipt of packets */
+#define HFI1_CMD_POLL_TYPE 9 /* set the kind of polling we want */
+#define HFI1_CMD_ACK_EVENT 10 /* ack & clear user status bits */
+#define HFI1_CMD_SET_PKEY 11 /* set context's pkey */
+#define HFI1_CMD_CTXT_RESET 12 /* reset context's HW send context */
+/* separate EPROM commands from normal PSM commands */
+#define HFI1_CMD_EP_INFO 64 /* read EPROM device ID */
+#define HFI1_CMD_EP_ERASE_CHIP 65 /* erase whole EPROM */
+#define HFI1_CMD_EP_ERASE_P0 66 /* erase EPROM partition 0 */
+#define HFI1_CMD_EP_ERASE_P1 67 /* erase EPROM partition 1 */
+#define HFI1_CMD_EP_READ_P0 68 /* read EPROM partition 0 */
+#define HFI1_CMD_EP_READ_P1 69 /* read EPROM partition 1 */
+#define HFI1_CMD_EP_WRITE_P0 70 /* write EPROM partition 0 */
+#define HFI1_CMD_EP_WRITE_P1 71 /* write EPROM partition 1 */
+
+#define _HFI1_EVENT_FROZEN_BIT 0
+#define _HFI1_EVENT_LINKDOWN_BIT 1
+#define _HFI1_EVENT_LID_CHANGE_BIT 2
+#define _HFI1_EVENT_LMC_CHANGE_BIT 3
+#define _HFI1_EVENT_SL2VL_CHANGE_BIT 4
+#define _HFI1_MAX_EVENT_BIT _HFI1_EVENT_SL2VL_CHANGE_BIT
+
+#define HFI1_EVENT_FROZEN (1UL << _HFI1_EVENT_FROZEN_BIT)
+#define HFI1_EVENT_LINKDOWN_BIT (1UL << _HFI1_EVENT_LINKDOWN_BIT)
+#define HFI1_EVENT_LID_CHANGE_BIT (1UL << _HFI1_EVENT_LID_CHANGE_BIT)
+#define HFI1_EVENT_LMC_CHANGE_BIT (1UL << _HFI1_EVENT_LMC_CHANGE_BIT)
+#define HFI1_EVENT_SL2VL_CHANGE_BIT (1UL << _HFI1_EVENT_SL2VL_CHANGE_BIT)
+
+/*
+ * These are the status bits readable (in ASCII form, 64bit value)
+ * from the "status" sysfs file. For binary compatibility, values
+ * must remain as is; removed states can be reused for different
+ * purposes.
+ */
+#define HFI1_STATUS_INITTED 0x1 /* basic initialization done */
+/* Chip has been found and initialized */
+#define HFI1_STATUS_CHIP_PRESENT 0x20
+/* IB link is at ACTIVE, usable for data traffic */
+#define HFI1_STATUS_IB_READY 0x40
+/* link is configured, LID, MTU, etc. have been set */
+#define HFI1_STATUS_IB_CONF 0x80
+/* A Fatal hardware error has occurred. */
+#define HFI1_STATUS_HWERROR 0x200
+
+/*
+ * Number of supported shared contexts.
+ * This is the maximum number of software contexts that can share
+ * a hardware send/receive context.
+ */
+#define HFI1_MAX_SHARED_CTXTS 8
+
+/*
+ * Poll types
+ */
+#define HFI1_POLL_TYPE_ANYRCV 0x0
+#define HFI1_POLL_TYPE_URGENT 0x1
+
+/*
+ * This structure is passed to the driver to tell it where
+ * user code buffers are, sizes, etc. The offsets and sizes of the
+ * fields must remain unchanged, for binary compatibility. It can
+ * be extended, if userversion is changed so user code can tell, if needed
+ */
+struct hfi1_user_info {
+ /*
+ * version of user software, to detect compatibility issues.
+ * Should be set to HFI1_USER_SWVERSION.
+ */
+ __u32 userversion;
+ __u16 pad;
+ /* HFI selection algorithm, if unit has not selected */
+ __u16 hfi1_alg;
+ /*
+ * If two or more processes wish to share a context, each process
+ * must set the subcontext_cnt and subcontext_id to the same
+ * values. The only restriction on the subcontext_id is that
+ * it be unique for a given node.
+ */
+ __u16 subctxt_cnt;
+ __u16 subctxt_id;
+ /* 128bit UUID passed in by PSM. */
+ __u8 uuid[16];
+};
+
+struct hfi1_ctxt_info {
+ __u64 runtime_flags; /* chip/drv runtime flags (HFI1_CAP_*) */
+ __u32 rcvegr_size; /* size of each eager buffer */
+ __u16 num_active; /* number of active units */
+ __u16 unit; /* unit (chip) assigned to caller */
+ __u16 ctxt; /* ctxt on unit assigned to caller */
+ __u16 subctxt; /* subctxt on unit assigned to caller */
+ __u16 rcvtids; /* number of Rcv TIDs for this context */
+ __u16 credits; /* number of PIO credits for this context */
+ __u16 numa_node; /* NUMA node of the assigned device */
+ __u16 rec_cpu; /* cpu # for affinity (0xffff if none) */
+ __u16 send_ctxt; /* send context in use by this user context */
+ __u16 egrtids; /* number of RcvArray entries for Eager Rcvs */
+ __u16 rcvhdrq_cnt; /* number of RcvHdrQ entries */
+ __u16 rcvhdrq_entsize; /* size (in bytes) for each RcvHdrQ entry */
+ __u16 sdma_ring_size; /* number of entries in SDMA request ring */
+};
+
+struct hfi1_tid_info {
+ /* virtual address of first page in transfer */
+ __u64 vaddr;
+ /* pointer to tid array. this array is big enough */
+ __u64 tidlist;
+ /* number of tids programmed by this request */
+ __u32 tidcnt;
+ /* length of transfer buffer programmed by this request */
+ __u32 length;
+ /*
+ * pointer to bitmap of TIDs used for this call;
+ * checked for being large enough at open
+ */
+ __u64 tidmap;
+};
+
+struct hfi1_cmd {
+ __u32 type; /* command type */
+ __u32 len; /* length of struct pointed to by add */
+ __u64 addr; /* pointer to user structure */
+};
+
+enum hfi1_sdma_comp_state {
+ FREE = 0,
+ QUEUED,
+ COMPLETE,
+ ERROR
+};
+
+/*
+ * SDMA completion ring entry
+ */
+struct hfi1_sdma_comp_entry {
+ __u32 status;
+ __u32 errcode;
+};
+
+/*
+ * Device status and notifications from driver to user-space.
+ */
+struct hfi1_status {
+ __u64 dev; /* device/hw status bits */
+ __u64 port; /* port state and status bits */
+ char freezemsg[0];
+};
+
+/*
+ * This structure is returned by the driver immediately after
+ * open to get implementation-specific info, and info specific to this
+ * instance.
+ *
+ * This struct must have explicit pad fields where type sizes
+ * may result in different alignments between 32 and 64 bit
+ * programs, since the 64 bit * bit kernel requires the user code
+ * to have matching offsets
+ */
+struct hfi1_base_info {
+ /* version of hardware, for feature checking. */
+ __u32 hw_version;
+ /* version of software, for feature checking. */
+ __u32 sw_version;
+ /* Job key */
+ __u16 jkey;
+ __u16 padding1;
+ /*
+ * The special QP (queue pair) value that identifies PSM
+ * protocol packet from standard IB packets.
+ */
+ __u32 bthqp;
+ /* PIO credit return address, */
+ __u64 sc_credits_addr;
+ /*
+ * Base address of write-only pio buffers for this process.
+ * Each buffer has sendpio_credits*64 bytes.
+ */
+ __u64 pio_bufbase_sop;
+ /*
+ * Base address of write-only pio buffers for this process.
+ * Each buffer has sendpio_credits*64 bytes.
+ */
+ __u64 pio_bufbase;
+ /* address where receive buffer queue is mapped into */
+ __u64 rcvhdr_bufbase;
+ /* base address of Eager receive buffers. */
+ __u64 rcvegr_bufbase;
+ /* base address of SDMA completion ring */
+ __u64 sdma_comp_bufbase;
+ /*
+ * User register base for init code, not to be used directly by
+ * protocol or applications. Always maps real chip register space.
+ * the register addresses are:
+ * ur_rcvhdrhead, ur_rcvhdrtail, ur_rcvegrhead, ur_rcvegrtail,
+ * ur_rcvtidflow
+ */
+ __u64 user_regbase;
+ /* notification events */
+ __u64 events_bufbase;
+ /* status page */
+ __u64 status_bufbase;
+ /* rcvhdrtail update */
+ __u64 rcvhdrtail_base;
+ /*
+ * shared memory pages for subctxts if ctxt is shared; these cover
+ * all the processes in the group sharing a single context.
+ * all have enough space for the num_subcontexts value on this job.
+ */
+ __u64 subctxt_uregbase;
+ __u64 subctxt_rcvegrbuf;
+ __u64 subctxt_rcvhdrbuf;
+};
+
+enum sdma_req_opcode {
+ EXPECTED = 0,
+ EAGER
+};
+
+#define HFI1_SDMA_REQ_VERSION_MASK 0xF
+#define HFI1_SDMA_REQ_VERSION_SHIFT 0x0
+#define HFI1_SDMA_REQ_OPCODE_MASK 0xF
+#define HFI1_SDMA_REQ_OPCODE_SHIFT 0x4
+#define HFI1_SDMA_REQ_IOVCNT_MASK 0xFF
+#define HFI1_SDMA_REQ_IOVCNT_SHIFT 0x8
+
+struct sdma_req_info {
+ /*
+ * bits 0-3 - version (currently unused)
+ * bits 4-7 - opcode (enum sdma_req_opcode)
+ * bits 8-15 - io vector count
+ */
+ __u16 ctrl;
+ /*
+ * Number of fragments contained in this request.
+ * User-space has already computed how many
+ * fragment-sized packet the user buffer will be
+ * split into.
+ */
+ __u16 npkts;
+ /*
+ * Size of each fragment the user buffer will be
+ * split into.
+ */
+ __u16 fragsize;
+ /*
+ * Index of the slot in the SDMA completion ring
+ * this request should be using. User-space is
+ * in charge of managing its own ring.
+ */
+ __u16 comp_idx;
+} __packed;
+
+/*
+ * SW KDETH header.
+ * swdata is SW defined portion.
+ */
+struct hfi1_kdeth_header {
+ __le32 ver_tid_offset;
+ __le16 jkey;
+ __le16 hcrc;
+ __le32 swdata[7];
+} __packed;
+
+/*
+ * Structure describing the headers that User space uses. The
+ * structure above is a subset of this one.
+ */
+struct hfi1_pkt_header {
+ __le16 pbc[4];
+ __be16 lrh[4];
+ __be32 bth[3];
+ struct hfi1_kdeth_header kdeth;
+} __packed;
+
+
+/*
+ * The list of usermode accessible registers.
+ */
+enum hfi1_ureg {
+ /* (RO) DMA RcvHdr to be used next. */
+ ur_rcvhdrtail = 0,
+ /* (RW) RcvHdr entry to be processed next by host. */
+ ur_rcvhdrhead = 1,
+ /* (RO) Index of next Eager index to use. */
+ ur_rcvegrindextail = 2,
+ /* (RW) Eager TID to be processed next */
+ ur_rcvegrindexhead = 3,
+ /* (RO) Receive Eager Offset Tail */
+ ur_rcvegroffsettail = 4,
+ /* For internal use only; max register number. */
+ ur_maxreg,
+ /* (RW) Receive TID flow table */
+ ur_rcvtidflowtable = 256
+};
+
+#endif /* _LINIUX__HFI1_USER_H */