@@ -9,36 +9,36 @@ config MWIFIEX
mwifiex.
config MWIFIEX_SDIO
- tristate "Marvell WiFi-Ex Driver for SD8786/SD8787/SD8797/SD8887/SD8897"
+ tristate "Marvell WiFi-Ex Driver for SD8786/SD8787/SD8797/SD8887/SD8897/SD8997"
depends on MWIFIEX && MMC
select FW_LOADER
select WANT_DEV_COREDUMP
---help---
This adds support for wireless adapters based on Marvell
- 8786/8787/8797/8887/8897 chipsets with SDIO interface.
+ 8786/8787/8797/8887/8897/8997 chipsets with SDIO interface.
If you choose to build it as a module, it will be called
mwifiex_sdio.
config MWIFIEX_PCIE
- tristate "Marvell WiFi-Ex Driver for PCIE 8766/8897"
+ tristate "Marvell WiFi-Ex Driver for PCIE 8766/8897/8997"
depends on MWIFIEX && PCI
select FW_LOADER
select WANT_DEV_COREDUMP
---help---
This adds support for wireless adapters based on Marvell
- 8766/8897 chipsets with PCIe interface.
+ 8766/8897/8997 chipsets with PCIe interface.
If you choose to build it as a module, it will be called
mwifiex_pcie.
config MWIFIEX_USB
- tristate "Marvell WiFi-Ex Driver for USB8766/8797/8897"
+ tristate "Marvell WiFi-Ex Driver for USB8766/8797/8897/8997"
depends on MWIFIEX && USB
select FW_LOADER
---help---
This adds support for wireless adapters based on Marvell
- 8797/8897 chipset with USB interface.
+ 8797/8897/8997 chipset with USB interface.
If you choose to build it as a module, it will be called
mwifiex_usb.
@@ -266,12 +266,17 @@ static const struct pci_device_id mwifiex_ids[] = {
{
PCIE_VENDOR_ID_MARVELL, PCIE_DEVICE_ID_MARVELL_88W8766P,
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- .driver_data = (unsigned long) &mwifiex_pcie8766,
+ .driver_data = (unsigned long)&mwifiex_pcie8766,
},
{
PCIE_VENDOR_ID_MARVELL, PCIE_DEVICE_ID_MARVELL_88W8897,
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- .driver_data = (unsigned long) &mwifiex_pcie8897,
+ .driver_data = (unsigned long)&mwifiex_pcie8897,
+ },
+ {
+ PCIE_VENDOR_ID_MARVELL, PCIE_DEVICE_ID_MARVELL_88W8997,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ .driver_data = (unsigned long)&mwifiex_pcie8997,
},
{},
};
@@ -1082,6 +1087,7 @@ static int mwifiex_pcie_send_data_complete(struct mwifiex_adapter *adapter)
card->txbd_rdptr++;
break;
case PCIE_DEVICE_ID_MARVELL_88W8897:
+ case PCIE_DEVICE_ID_MARVELL_88W8997:
card->txbd_rdptr += reg->ring_tx_start_ptr;
break;
}
@@ -1179,6 +1185,7 @@ mwifiex_pcie_send_data(struct mwifiex_adapter *adapter, struct sk_buff *skb,
card->txbd_wrptr++;
break;
case PCIE_DEVICE_ID_MARVELL_88W8897:
+ case PCIE_DEVICE_ID_MARVELL_88W8997:
card->txbd_wrptr += reg->ring_tx_start_ptr;
break;
}
@@ -2733,3 +2740,4 @@ MODULE_VERSION(PCIE_VERSION);
MODULE_LICENSE("GPL v2");
MODULE_FIRMWARE(PCIE8766_DEFAULT_FW_NAME);
MODULE_FIRMWARE(PCIE8897_DEFAULT_FW_NAME);
+MODULE_FIRMWARE(PCIE8997_DEFAULT_FW_NAME);
@@ -30,10 +30,12 @@
#define PCIE8766_DEFAULT_FW_NAME "mrvl/pcie8766_uapsta.bin"
#define PCIE8897_DEFAULT_FW_NAME "mrvl/pcie8897_uapsta.bin"
+#define PCIE8997_DEFAULT_FW_NAME "mrvl/pcie8997_uapsta.bin"
#define PCIE_VENDOR_ID_MARVELL (0x11ab)
#define PCIE_DEVICE_ID_MARVELL_88W8766P (0x2b30)
#define PCIE_DEVICE_ID_MARVELL_88W8897 (0x2b38)
+#define PCIE_DEVICE_ID_MARVELL_88W8997 (0x2b42)
/* Constants for Buffer Descriptor (BD) rings */
#define MWIFIEX_MAX_TXRX_BD 0x20
@@ -197,7 +199,38 @@ static const struct mwifiex_pcie_card_reg mwifiex_reg_8897 = {
.sleep_cookie = 0,
.fw_dump_ctrl = 0xcf4,
.fw_dump_start = 0xcf8,
- .fw_dump_end = 0xcff
+ .fw_dump_end = 0xcff,
+};
+
+static const struct mwifiex_pcie_card_reg mwifiex_reg_8997 = {
+ .cmd_addr_lo = PCIE_SCRATCH_0_REG,
+ .cmd_addr_hi = PCIE_SCRATCH_1_REG,
+ .cmd_size = PCIE_SCRATCH_2_REG,
+ .fw_status = PCIE_SCRATCH_3_REG,
+ .cmdrsp_addr_lo = PCIE_SCRATCH_4_REG,
+ .cmdrsp_addr_hi = PCIE_SCRATCH_5_REG,
+ .tx_rdptr = 0xC1A4,
+ .tx_wrptr = 0xC1A8,
+ .rx_rdptr = 0xC1A8,
+ .rx_wrptr = 0xC1A4,
+ .evt_rdptr = PCIE_SCRATCH_10_REG,
+ .evt_wrptr = PCIE_SCRATCH_11_REG,
+ .drv_rdy = PCIE_SCRATCH_12_REG,
+ .tx_start_ptr = 16,
+ .tx_mask = 0x0FFF0000,
+ .tx_wrap_mask = 0x01FF0000,
+ .rx_mask = 0x00000FFF,
+ .rx_wrap_mask = 0x000001FF,
+ .tx_rollover_ind = BIT(28),
+ .rx_rollover_ind = BIT(12),
+ .evt_rollover_ind = MWIFIEX_BD_FLAG_EVT_ROLLOVER_IND,
+ .ring_flag_sop = MWIFIEX_BD_FLAG_SOP,
+ .ring_flag_eop = MWIFIEX_BD_FLAG_EOP,
+ .ring_flag_xs_sop = MWIFIEX_BD_FLAG_XS_SOP,
+ .ring_flag_xs_eop = MWIFIEX_BD_FLAG_XS_EOP,
+ .ring_tx_start_ptr = MWIFIEX_BD_FLAG_TX_START_PTR,
+ .pfu_enabled = 1,
+ .sleep_cookie = 0,
};
struct mwifiex_pcie_device {
@@ -227,6 +260,15 @@ static const struct mwifiex_pcie_device mwifiex_pcie8897 = {
.can_ext_scan = true,
};
+static const struct mwifiex_pcie_device mwifiex_pcie8997 = {
+ .firmware = PCIE8997_DEFAULT_FW_NAME,
+ .reg = &mwifiex_reg_8997,
+ .blksz_fw_dl = MWIFIEX_PCIE_BLOCK_SIZE_FW_DNLD,
+ .tx_buf_size = MWIFIEX_TX_DATA_BUF_SIZE_4K,
+ .can_dump_fw = false,
+ .can_ext_scan = true,
+};
+
struct mwifiex_evt_buf_desc {
u64 paddr;
u16 len;
@@ -325,6 +367,7 @@ mwifiex_pcie_txbd_not_full(struct pcie_service_card *card)
return 1;
break;
case PCIE_DEVICE_ID_MARVELL_88W8897:
+ case PCIE_DEVICE_ID_MARVELL_88W8997:
if (((card->txbd_wrptr & reg->tx_mask) !=
(card->txbd_rdptr & reg->tx_mask)) ||
((card->txbd_wrptr & reg->tx_rollover_ind) ==
@@ -288,6 +288,8 @@ static int mwifiex_sdio_suspend(struct device *dev)
#define SDIO_DEVICE_ID_MARVELL_8887 (0x9135)
/* Device ID for SD8801 */
#define SDIO_DEVICE_ID_MARVELL_8801 (0x9139)
+/* Device ID for SD8997 */
+#define SDIO_DEVICE_ID_MARVELL_8997 (0x9141)
/* WLAN IDs */
@@ -304,6 +306,8 @@ static const struct sdio_device_id mwifiex_ids[] = {
.driver_data = (unsigned long)&mwifiex_sdio_sd8887},
{SDIO_DEVICE(SDIO_VENDOR_ID_MARVELL, SDIO_DEVICE_ID_MARVELL_8801),
.driver_data = (unsigned long)&mwifiex_sdio_sd8801},
+ {SDIO_DEVICE(SDIO_VENDOR_ID_MARVELL, SDIO_DEVICE_ID_MARVELL_8997),
+ .driver_data = (unsigned long)&mwifiex_sdio_sd8997},
{},
};
@@ -2531,3 +2535,4 @@ MODULE_FIRMWARE(SD8787_DEFAULT_FW_NAME);
MODULE_FIRMWARE(SD8797_DEFAULT_FW_NAME);
MODULE_FIRMWARE(SD8897_DEFAULT_FW_NAME);
MODULE_FIRMWARE(SD8887_DEFAULT_FW_NAME);
+MODULE_FIRMWARE(SD8997_DEFAULT_FW_NAME);
@@ -35,6 +35,7 @@
#define SD8897_DEFAULT_FW_NAME "mrvl/sd8897_uapsta.bin"
#define SD8887_DEFAULT_FW_NAME "mrvl/sd8887_uapsta.bin"
#define SD8801_DEFAULT_FW_NAME "mrvl/sd8801_uapsta.bin"
+#define SD8997_DEFAULT_FW_NAME "mrvl/sd8997_uapsta.bin"
#define BLOCK_MODE 1
#define BYTE_MODE 0
@@ -364,6 +365,55 @@ static const struct mwifiex_sdio_card_reg mwifiex_reg_sd8897 = {
0x59, 0x5c, 0x5d},
};
+static const struct mwifiex_sdio_card_reg mwifiex_reg_sd8997 = {
+ .start_rd_port = 0,
+ .start_wr_port = 0,
+ .base_0_reg = 0xF8,
+ .base_1_reg = 0xF9,
+ .poll_reg = 0x5C,
+ .host_int_enable = UP_LD_HOST_INT_MASK | DN_LD_HOST_INT_MASK |
+ CMD_PORT_UPLD_INT_MASK | CMD_PORT_DNLD_INT_MASK,
+ .host_int_rsr_reg = 0x4,
+ .host_int_status_reg = 0x0C,
+ .host_int_mask_reg = 0x08,
+ .status_reg_0 = 0xE8,
+ .status_reg_1 = 0xE9,
+ .sdio_int_mask = 0xff,
+ .data_port_mask = 0xffffffff,
+ .io_port_0_reg = 0xE4,
+ .io_port_1_reg = 0xE5,
+ .io_port_2_reg = 0xE6,
+ .max_mp_regs = 196,
+ .rd_bitmap_l = 0x10,
+ .rd_bitmap_u = 0x11,
+ .rd_bitmap_1l = 0x12,
+ .rd_bitmap_1u = 0x13,
+ .wr_bitmap_l = 0x14,
+ .wr_bitmap_u = 0x15,
+ .wr_bitmap_1l = 0x16,
+ .wr_bitmap_1u = 0x17,
+ .rd_len_p0_l = 0x18,
+ .rd_len_p0_u = 0x19,
+ .card_misc_cfg_reg = 0xd8,
+ .card_cfg_2_1_reg = 0xd9,
+ .cmd_rd_len_0 = 0xc0,
+ .cmd_rd_len_1 = 0xc1,
+ .cmd_rd_len_2 = 0xc2,
+ .cmd_rd_len_3 = 0xc3,
+ .cmd_cfg_0 = 0xc4,
+ .cmd_cfg_1 = 0xc5,
+ .cmd_cfg_2 = 0xc6,
+ .cmd_cfg_3 = 0xc7,
+ .func1_dump_reg_start = 0x10,
+ .func1_dump_reg_end = 0x17,
+ .func1_scratch_reg = 0xe8,
+ .func1_spec_reg_num = 13,
+ .func1_spec_reg_table = {0x08, 0x58, 0x5C, 0x5D,
+ 0x60, 0x61, 0x62, 0x64,
+ 0x65, 0x66, 0x68, 0x69,
+ 0x6a},
+};
+
static const struct mwifiex_sdio_card_reg mwifiex_reg_sd8887 = {
.start_rd_port = 0,
.start_wr_port = 0,
@@ -472,6 +522,21 @@ static const struct mwifiex_sdio_device mwifiex_sdio_sd8897 = {
.can_ext_scan = true,
};
+static const struct mwifiex_sdio_device mwifiex_sdio_sd8997 = {
+ .firmware = SD8997_DEFAULT_FW_NAME,
+ .reg = &mwifiex_reg_sd8997,
+ .max_ports = 32,
+ .mp_agg_pkt_limit = 16,
+ .tx_buf_size = MWIFIEX_TX_DATA_BUF_SIZE_4K,
+ .mp_tx_agg_buf_size = MWIFIEX_MP_AGGR_BUF_SIZE_MAX,
+ .mp_rx_agg_buf_size = MWIFIEX_MP_AGGR_BUF_SIZE_MAX,
+ .supports_sdio_new_mode = true,
+ .has_control_mask = false,
+ .can_dump_fw = false,
+ .can_auto_tdls = false,
+ .can_ext_scan = true,
+};
+
static const struct mwifiex_sdio_device mwifiex_sdio_sd8887 = {
.firmware = SD8887_DEFAULT_FW_NAME,
.reg = &mwifiex_reg_sd8887,
@@ -47,6 +47,11 @@ static struct usb_device_id mwifiex_usb_table[] = {
{USB_DEVICE_AND_INTERFACE_INFO(USB8XXX_VID, USB8897_PID_2,
USB_CLASS_VENDOR_SPEC,
USB_SUBCLASS_VENDOR_SPEC, 0xff)},
+ /* 8997 */
+ {USB_DEVICE(USB8XXX_VID, USB8997_PID_1)},
+ {USB_DEVICE_AND_INTERFACE_INFO(USB8XXX_VID, USB8997_PID_2,
+ USB_CLASS_VENDOR_SPEC,
+ USB_SUBCLASS_VENDOR_SPEC, 0xff)},
{ } /* Terminating entry */
};
@@ -382,12 +387,14 @@ static int mwifiex_usb_probe(struct usb_interface *intf,
case USB8797_PID_1:
case USB8801_PID_1:
case USB8897_PID_1:
+ case USB8997_PID_1:
card->usb_boot_state = USB8XXX_FW_DNLD;
break;
case USB8766_PID_2:
case USB8797_PID_2:
case USB8801_PID_2:
case USB8897_PID_2:
+ case USB8997_PID_2:
card->usb_boot_state = USB8XXX_FW_READY;
break;
default:
@@ -814,6 +821,12 @@ static int mwifiex_register_dev(struct mwifiex_adapter *adapter)
adapter->dev = &card->udev->dev;
switch (le16_to_cpu(card->udev->descriptor.idProduct)) {
+ case USB8997_PID_1:
+ case USB8997_PID_2:
+ adapter->tx_buf_size = MWIFIEX_TX_DATA_BUF_SIZE_4K;
+ strcpy(adapter->fw_name, USB8997_DEFAULT_FW_NAME);
+ adapter->ext_scan = true;
+ break;
case USB8897_PID_1:
case USB8897_PID_2:
adapter->tx_buf_size = MWIFIEX_TX_DATA_BUF_SIZE_4K;
@@ -1121,3 +1134,4 @@ MODULE_FIRMWARE(USB8766_DEFAULT_FW_NAME);
MODULE_FIRMWARE(USB8797_DEFAULT_FW_NAME);
MODULE_FIRMWARE(USB8801_DEFAULT_FW_NAME);
MODULE_FIRMWARE(USB8897_DEFAULT_FW_NAME);
+MODULE_FIRMWARE(USB8997_DEFAULT_FW_NAME);
@@ -32,6 +32,8 @@
#define USB8897_PID_2 0x2046
#define USB8801_PID_1 0x2049
#define USB8801_PID_2 0x204a
+#define USB8997_PID_1 0x204d
+#define USB8997_PID_2 0x204e
#define USB8XXX_FW_DNLD 1
@@ -46,6 +48,7 @@
#define USB8797_DEFAULT_FW_NAME "mrvl/usb8797_uapsta.bin"
#define USB8801_DEFAULT_FW_NAME "mrvl/usb8801_uapsta.bin"
#define USB8897_DEFAULT_FW_NAME "mrvl/usb8897_uapsta.bin"
+#define USB8997_DEFAULT_FW_NAME "mrvl/usb8997_uapsta.bin"
#define FW_DNLD_TX_BUF_SIZE 620
#define FW_DNLD_RX_BUF_SIZE 2048