diff mbox

staging/rdma/hfi1: Disable thermal polling before sensor initialization

Message ID 1446698657-26743-1-git-send-email-jubin.john@intel.com (mailing list archive)
State Not Applicable
Headers show

Commit Message

jubin.john@intel.com Nov. 5, 2015, 4:44 a.m. UTC
From: jareer.h.abdel-qader <jareer.h.abdel-qader@intel.com>

During driver load the thermal sensor needs to be reset prior
to initialization of the sensor. This prevents a possible sensor lock
up which can cause the wrong temperature value to be reported.
This fix leads to remove disabling thermal polling from
reset_asic_csrs() function.

Reviewed by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Reviewed by: Easwar Hariharan <easwar.hariharan@intel.com>
Signed-off-by: Jareer Abdel-Qader <jareer.h.abdel-qader@intel.com>
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Jubin John <jubin.john@intel.com>
---
 drivers/staging/rdma/hfi1/chip.c |    6 ++++--
 1 files changed, 4 insertions(+), 2 deletions(-)

Comments

Dan Carpenter Nov. 5, 2015, 8:01 a.m. UTC | #1
On Wed, Nov 04, 2015 at 11:44:17PM -0500, jubin.john@intel.com wrote:
> From: jareer.h.abdel-qader <jareer.h.abdel-qader@intel.com>


This should be "Jareer Abdel-Qader <jareer.h.abdel-qader@intel.com>".

regards,
dan carpenter

--
To unsubscribe from this list: send the line "unsubscribe linux-rdma" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
jubin.john@intel.com Nov. 5, 2015, 11:01 p.m. UTC | #2
> This should be "Jareer Abdel-Qader <jareer.h.abdel-qader@intel.com>".

ok. Will fix in V2.

Thanks,
Jubin John
--
To unsubscribe from this list: send the line "unsubscribe linux-rdma" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox

Patch

diff --git a/drivers/staging/rdma/hfi1/chip.c b/drivers/staging/rdma/hfi1/chip.c
index e489819..e1951f4 100644
--- a/drivers/staging/rdma/hfi1/chip.c
+++ b/drivers/staging/rdma/hfi1/chip.c
@@ -9455,7 +9455,7 @@  static void reset_asic_csrs(struct hfi1_devdata *dd)
 	/* We might want to retain this state across FLR if we ever use it */
 	write_csr(dd, ASIC_CFG_DRV_STR, 0);
 
-	write_csr(dd, ASIC_CFG_THERM_POLL_EN, 0);
+	/* ASIC_CFG_THERM_POLL_EN leave alone */
 	/* ASIC_STS_THERM read-only */
 	/* ASIC_CFG_RESET leave alone */
 
@@ -10803,7 +10803,9 @@  static int thermal_init(struct hfi1_devdata *dd)
 
 	acquire_hw_mutex(dd);
 	dd_dev_info(dd, "Initializing thermal sensor\n");
-
+	/* Disable polling of thermal readings */
+	write_csr(dd, ASIC_CFG_THERM_POLL_EN, 0x0);
+	msleep(100);
 	/* Thermal Sensor Initialization */
 	/*    Step 1: Reset the Thermal SBus Receiver */
 	ret = sbus_request_slow(dd, SBUS_THERMAL, 0x0,