diff mbox

[v2,4/5] PCI: qcom: Add Qualcomm PCIe controller driver

Message ID 1430743338-10441-5-git-send-email-svarbanov@mm-sol.com (mailing list archive)
State New, archived
Delegated to: Bjorn Helgaas
Headers show

Commit Message

Stanimir Varbanov May 4, 2015, 12:42 p.m. UTC
The PCIe driver reuse the Designware common code for host
and MSI initialization, and also program the Qualcomm
application specific registers.

Signed-off-by: Stanimir Varbanov <svarbanov@mm-sol.com>
---
 MAINTAINERS                  |    7 +
 drivers/pci/host/Kconfig     |    9 +
 drivers/pci/host/Makefile    |    1 +
 drivers/pci/host/pcie-qcom.c |  677 ++++++++++++++++++++++++++++++++++++++++++
 4 files changed, 694 insertions(+), 0 deletions(-)
 create mode 100644 drivers/pci/host/pcie-qcom.c

Comments

Bjorn Andersson Nov. 6, 2015, 8:50 p.m. UTC | #1
On Mon 04 May 05:42 PDT 2015, Stanimir Varbanov wrote:

> The PCIe driver reuse the Designware common code for host
> and MSI initialization, and also program the Qualcomm
> application specific registers.
> 

I want to get the ethernet on the ifc6410 running and this seems like
the last patchset for the PCIe.

> Signed-off-by: Stanimir Varbanov <svarbanov@mm-sol.com>
[..]
> diff --git a/drivers/pci/host/pcie-qcom.c b/drivers/pci/host/pcie-qcom.c
> new file mode 100644
> index 0000000..4f083c6
> --- /dev/null
> +++ b/drivers/pci/host/pcie-qcom.c
> @@ -0,0 +1,677 @@
> +/*
> + * Copyright (c) 2014, The Linux Foundation. All rights reserved.

Bump the year, it's the future now :)

> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 and
> + * only version 2 as published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> + * GNU General Public License for more details.
> + */
> +
[..]
> +
> +struct qcom_pcie {
> +	struct pcie_port pp;
> +	struct device *dev;

You already have this device pointer in pp->dev.

> +	union pcie_resources res;
> +	void __iomem *parf;
> +	void __iomem *dbi;
> +	void __iomem *elbi;
> +	struct phy *phy;
> +	struct gpio_desc *reset;
> +	unsigned int version;
> +};
> +
> +#define to_qcom_pcie(x)		container_of(x, struct qcom_pcie, pp)
> +
> +static inline void
> +writel_masked(void __iomem *addr, u32 clear_mask, u32 set_mask)
> +{
> +	u32 val = readl(addr);
> +
> +	val &= ~clear_mask;
> +	val |= set_mask;
> +	writel(val, addr);
> +}

There are no case where you do clear and set, so I would like that you
just inline this function where you need it. It adds 2 extra lines at a
few places, but a lot of clarity.

> +
> +static void qcom_ep_reset_assert_deassert(struct qcom_pcie *pcie, int assert)
> +{
> +	int val, active_low;
> +
> +	if (IS_ERR_OR_NULL(pcie->reset))
> +		return;

This will be NULL or valid here, never ERR. So it's fine to call
gpiod_set_value() with this pointer without the check.

> +
> +	active_low = gpiod_is_active_low(pcie->reset);
> +

gpiod_set_value() checks for FLAG_ACTIVE_LOW and will invert the value
first thing. So you do not need to do this manually.

> +	if (assert)
> +		val = !!active_low;
> +	else
> +		val = !active_low;
> +
> +	gpiod_set_value(pcie->reset, val);
> +
> +	usleep_range(PERST_DELAY_MIN_US, PERST_DELAY_MAX_US);

This doesn't seem to be called in a hot path, so you should be able to
simply msleep(1) here.

> +}
> +
> +static void qcom_ep_reset_assert(struct qcom_pcie *pcie)
> +{
> +	qcom_ep_reset_assert_deassert(pcie, 1);

If we're down to this function just being a gpiod_set_value() and a
sleep we can inline it here instead of having this proxy function.

> +}
> +
> +static void qcom_ep_reset_deassert(struct qcom_pcie *pcie)
> +{
> +	qcom_ep_reset_assert_deassert(pcie, 0);

Same here.

> +}
> +
> +static irqreturn_t qcom_pcie_msi_irq_handler(int irq, void *arg)
> +{
> +	struct pcie_port *pp = arg;
> +
> +	return dw_handle_msi_irq(pp);
> +}
> +
> +static int qcom_pcie_link_up(struct pcie_port *pp)
> +{
> +	struct qcom_pcie *pcie = to_qcom_pcie(pp);
> +	u32 val = readl(pcie->dbi + PCIE20_CAP_LINKCTRLSTATUS);
> +
> +	return val & BIT(29) ? 1 : 0;

return !!(val & BIT(29));

Do we know what this bit 29 is?

> +}
> +
[..]
> +
> +static int qcom_pcie_get_resources_v1(struct qcom_pcie *pcie)
> +{
> +	struct qcom_pcie_resources_v1 *res = &pcie->res.v1;
> +	struct device *dev = pcie->dev;
> +
> +	res->vdda = devm_regulator_get(dev, "vdda");
> +	if (IS_ERR(res->vdda))
> +		return PTR_ERR(res->vdda);
> +
> +	res->iface = devm_clk_get(dev, "iface");
> +	if (IS_ERR(res->iface))
> +		return PTR_ERR(res->iface);
> +
> +	res->aux = devm_clk_get(dev, "aux");
> +	if (IS_ERR(res->aux) && PTR_ERR(res->aux) == -EPROBE_DEFER)

PTR_ERR() == x implies IS_ERR(), so you don't need both.

> +		return -EPROBE_DEFER;
> +	else if (IS_ERR(res->aux))
> +		res->aux = NULL;
> +
> +	res->master_bus = devm_clk_get(dev, "master_bus");
> +	if (IS_ERR(res->master_bus))
> +		return PTR_ERR(res->master_bus);
> +
> +	res->slave_bus = devm_clk_get(dev, "slave_bus");
> +	if (IS_ERR(res->slave_bus))
> +		return PTR_ERR(res->slave_bus);
> +
> +	res->core = devm_reset_control_get(dev, "core");
> +	if (IS_ERR(res->core))
> +		return PTR_ERR(res->core);
> +
> +	return 0;
> +}
> +
> +static int qcom_pcie_enable_link_training(struct pcie_port *pp)
> +{
> +	struct qcom_pcie *pcie = to_qcom_pcie(pp);
> +	struct device *dev = pp->dev;
> +	int retries;
> +	u32 val;
> +
> +	/* enable link training */
> +	writel_masked(pcie->elbi + PCIE20_ELBI_SYS_CTRL, 0, BIT(0));
> +
> +	/* wait for up to 100ms for the link to come up */
> +	retries = LINKUP_RETRIES_COUNT;
> +	do {
> +		val = readl(pcie->elbi + PCIE20_ELBI_SYS_STTS);
> +		if (val & XMLH_LINK_UP)
> +			break;
> +		usleep_range(LINKUP_DELAY_MIN_US, LINKUP_DELAY_MAX_US);
> +	} while (retries--);
> +
> +	if (retries < 0 || !dw_pcie_link_up(pp)) {
> +		dev_err(dev, "link initialization failed\n");
> +		return -ENXIO;
> +	}

Rather than implementing this based on a number of retries, I think it
would be cleaner to set a goal for jiffies + HZ / 10, then in the loop
you check your conditions, then check for time_after(jiffies, timeout)
and finally msleep() for a while.

> +
> +	return 0;
> +}
> +
[..]
> +static void qcom_pcie_host_init_v0(struct pcie_port *pp)
> +{
> +	struct qcom_pcie *pcie = to_qcom_pcie(pp);
> +	struct qcom_pcie_resources_v0 *res = &pcie->res.v0;
> +	struct device *dev = pcie->dev;
> +	int ret;
> +
> +	qcom_ep_reset_assert(pcie);
> +
> +	ret = qcom_pcie_enable_resources_v0(pcie);
> +	if (ret)
> +		return;
> +
> +	writel_masked(pcie->parf + PCIE20_PARF_PHY_CTRL, BIT(0), 0);

Do we have a name for this bit?

> +
> +	/* enable external reference clock */
> +	writel_masked(pcie->parf + PCIE20_PARF_PHY_REFCLK, 0, BIT(16));

Do we have a name for this bit?

> +
> +	ret = reset_control_deassert(res->phy_reset);
> +	if (ret) {
> +		dev_err(dev, "cannot deassert phy reset\n");
> +		return;
> +	}
> +
> +	ret = reset_control_deassert(res->pci_reset);
> +	if (ret) {
> +		dev_err(dev, "cannot deassert pci reset\n");
> +		return;
> +	}
> +
> +	ret = reset_control_deassert(res->por_reset);
> +	if (ret) {
> +		dev_err(dev, "cannot deassert por reset\n");
> +		return;
> +	}
> +
> +	ret = reset_control_deassert(res->axi_reset);
> +	if (ret) {
> +		dev_err(dev, "cannot deassert axi reset\n");
> +		return;
> +	}
> +
> +	/* wait 150ms for clock acquisition */
> +	usleep_range(10000, 15000);

Either the comment or the sleep is wrong. Also, I think you should just
use msleep() here, the precision doesn't look important.

> +
> +	dw_pcie_setup_rc(pp);
> +
> +	if (IS_ENABLED(CONFIG_PCI_MSI))
> +		dw_pcie_msi_init(pp);
> +
> +	qcom_ep_reset_deassert(pcie);
> +
> +	ret = qcom_pcie_enable_link_training(pp);
> +	if (ret)
> +		goto err;
> +
> +	return;
> +err:
> +	qcom_ep_reset_assert(pcie);
> +	qcom_pcie_disable_resources_v0(pcie);
> +}
> +
[..]
> +static int
> +qcom_pcie_rd_own_conf(struct pcie_port *pp, int where, int size, u32 *val)
> +{
> +	/* the device class is not reported correctly from the register */
> +	if (where == PCI_CLASS_REVISION && size == 4) {
> +		*val = readl(pp->dbi_base + PCI_CLASS_REVISION);
> +		*val &= ~(0xffff << 16);

Isn't this the same as *val &= 0xffff; ?

> +		*val |= PCI_CLASS_BRIDGE_PCI << 16;

Feels like it would be cleaner to just to:

u32 rev;

rev = readl(pp->dbi_base + PCI_CLASS_REVISION);
*val = PCI_CLASS_BRIDGE_PCI << 16 | rev & 0xffff;

> +		return PCIBIOS_SUCCESSFUL;
> +	}
> +
> +	return dw_pcie_cfg_read(pp->dbi_base + (where & ~0x3), where,
> +				size, val);

This api has been simplified, the new version should be:

  dw_pcie_cfg_read(pp->dbi_base + where, size, val);

> +}
> +
[..]
> +static const struct of_device_id qcom_pcie_match[] = {
> +	{ .compatible = "qcom,pcie-v0", .data = (void *)PCIE_V0 },
> +	{ .compatible = "qcom,pcie-v1", .data = (void *)PCIE_V1 },
> +	{ }
> +};

MODULE_DEVICE_TABLE() and move this below remove()

> +
> +static int qcom_pcie_probe(struct platform_device *pdev)
> +{
> +	struct device *dev = &pdev->dev;
> +	const struct of_device_id *match;
> +	struct resource *res;
> +	struct qcom_pcie *pcie;
> +	struct pcie_port *pp;
> +	int ret;
> +
> +	match = of_match_node(qcom_pcie_match, dev->of_node);
> +	if (!match)
> +		return -ENXIO;
> +
> +	pcie = devm_kzalloc(dev, sizeof(*pcie), GFP_KERNEL);
> +	if (!pcie)
> +		return -ENOMEM;
> +
> +	pcie->version = (unsigned int)match->data;

Use of_device_get_match_data() here instead.

> +
> +	pcie->reset = devm_gpiod_get_optional(dev, "perst");
> +	if (IS_ERR(pcie->reset) && PTR_ERR(pcie->reset) == -EPROBE_DEFER)
> +		return PTR_ERR(pcie->reset);

devm_gpiod_get_optional() will either return an IS_ERR() or NULL in the
case of it not being found. So I think you should always return
PTR_ERR() if IS_ERR() is set.


Also, the devm_gpiod_get_optional() api has gotten a third parameter,
set it to GPIOD_OUT_LOW.

> +
> +	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "parf");
> +	pcie->parf = devm_ioremap_resource(dev, res);
> +	if (IS_ERR(pcie->parf))
> +		return PTR_ERR(pcie->parf);
> +
> +	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "dbi");
> +	pcie->dbi = devm_ioremap_resource(dev, res);
> +	if (IS_ERR(pcie->dbi))
> +		return PTR_ERR(pcie->dbi);
> +
> +	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "elbi");
> +	pcie->elbi = devm_ioremap_resource(dev, res);
> +	if (IS_ERR(pcie->elbi))
> +		return PTR_ERR(pcie->elbi);
> +
> +	pcie->phy = devm_phy_optional_get(dev, "pciephy");
> +	if (IS_ERR(pcie->phy))
> +		return PTR_ERR(pcie->phy);
> +
> +	pcie->dev = dev;

nit, move this lonely assignment up to the version assignment to make it
happier. Or you could just use pcie->pp->dev throughout the driver...

> +
> +	if (pcie->version == PCIE_V0)
> +		ret = qcom_pcie_get_resources_v0(pcie);
> +	else
> +		ret = qcom_pcie_get_resources_v1(pcie);
> +
> +	if (ret)
> +		return ret;
> +
> +	pp = &pcie->pp;
> +	pp->dev = dev;
> +	pp->dbi_base = pcie->dbi;
> +	pp->root_bus_nr = -1;
> +	pp->ops = &qcom_pcie_ops;
> +
> +	if (IS_ENABLED(CONFIG_PCI_MSI)) {
> +		pp->msi_irq = platform_get_irq_byname(pdev, "msi");
> +		if (pp->msi_irq < 0) {
> +			dev_err(dev, "cannot get msi irq\n");
> +			return pp->msi_irq;
> +		}
> +

Feeding an error value of msi_irq into request_irq will fails
gracefully, so you could just skip the error handling above.

> +		ret = devm_request_irq(dev, pp->msi_irq,
> +				       qcom_pcie_msi_irq_handler,
> +				       IRQF_SHARED, "qcom-pcie-msi", pp);
> +		if (ret) {
> +			dev_err(dev, "cannot request msi irq\n");
> +			return ret;
> +		}
> +	}
> +
> +	ret = dw_pcie_host_init(pp);
> +	if (ret) {
> +		dev_err(dev, "cannot initialize host\n");
> +		return ret;
> +	}
> +
> +	platform_set_drvdata(pdev, pcie);
> +
> +	return 0;
> +}
> +
[..]
> +
> +MODULE_AUTHOR("Stanimir Varbanov <svarbanov@mm-sol.com>");
> +MODULE_DESCRIPTION("Qualcomm PCIe root complex driver");
> +MODULE_LICENSE("GPL v2");
> +MODULE_ALIAS("platform:qcom-pcie");

There's little point in the MODULE_ALIAS(), please drop it.

Regards,
Bjorn
--
To unsubscribe from this list: send the line "unsubscribe linux-pci" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Stanimir Varbanov Nov. 9, 2015, 4:56 p.m. UTC | #2
Hi Bjorn,

On 11/06/2015 10:50 PM, Bjorn Andersson wrote:
> On Mon 04 May 05:42 PDT 2015, Stanimir Varbanov wrote:
> 
>> The PCIe driver reuse the Designware common code for host
>> and MSI initialization, and also program the Qualcomm
>> application specific registers.
>>
> 
> I want to get the ethernet on the ifc6410 running and this seems like
> the last patchset for the PCIe.
> 
>> Signed-off-by: Stanimir Varbanov <svarbanov@mm-sol.com>
> [..]
>> diff --git a/drivers/pci/host/pcie-qcom.c b/drivers/pci/host/pcie-qcom.c
>> new file mode 100644
>> index 0000000..4f083c6
>> --- /dev/null
>> +++ b/drivers/pci/host/pcie-qcom.c
>> @@ -0,0 +1,677 @@
>> +/*
>> + * Copyright (c) 2014, The Linux Foundation. All rights reserved.
> 
> Bump the year, it's the future now :)

yep, thanks for the valuable comments I will address all of them on next
version.

I will probably restart the work on the driver this week.
diff mbox

Patch

diff --git a/MAINTAINERS b/MAINTAINERS
index 781e099..1ce2628 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -7564,6 +7564,13 @@  L:	linux-pci@vger.kernel.org
 S:	Orphan
 F:	drivers/pci/host/*spear*
 
+PCIE DRIVER FOR QUALCOMM MSM
+M:	Stanimir Varbanov <svarbanov@mm-sol.com>
+L:	linux-pci@vger.kernel.org
+L:	linux-arm-msm@vger.kernel.org
+S:	Maintained
+F:	drivers/pci/host/*qcom*
+
 PCMCIA SUBSYSTEM
 P:	Linux PCMCIA Team
 L:	linux-pcmcia@lists.infradead.org
diff --git a/drivers/pci/host/Kconfig b/drivers/pci/host/Kconfig
index 1dfb567..1dc2757 100644
--- a/drivers/pci/host/Kconfig
+++ b/drivers/pci/host/Kconfig
@@ -125,4 +125,13 @@  config PCIE_IPROC_PLATFORM
 	  Say Y here if you want to use the Broadcom iProc PCIe controller
 	  through the generic platform bus interface
 
+config PCIE_QCOM
+	bool "Qualcomm PCIe controller"
+	depends on ARCH_QCOM && OF || (ARM && COMPILE_TEST)
+	select PCIE_DW
+	select PCIEPORTBUS
+	help
+	  Say Y here to enable PCIe controller support on Qualcomm SoCs. The
+	  PCIe controller use Designware core plus Qualcomm specific hardware
+	  wrappers.
 endmenu
diff --git a/drivers/pci/host/Makefile b/drivers/pci/host/Makefile
index f733b4e..a865294 100644
--- a/drivers/pci/host/Makefile
+++ b/drivers/pci/host/Makefile
@@ -15,3 +15,4 @@  obj-$(CONFIG_PCI_LAYERSCAPE) += pci-layerscape.o
 obj-$(CONFIG_PCI_VERSATILE) += pci-versatile.o
 obj-$(CONFIG_PCIE_IPROC) += pcie-iproc.o
 obj-$(CONFIG_PCIE_IPROC_PLATFORM) += pcie-iproc-platform.o
+obj-$(CONFIG_PCIE_QCOM) += pcie-qcom.o
diff --git a/drivers/pci/host/pcie-qcom.c b/drivers/pci/host/pcie-qcom.c
new file mode 100644
index 0000000..4f083c6
--- /dev/null
+++ b/drivers/pci/host/pcie-qcom.c
@@ -0,0 +1,677 @@ 
+/*
+ * Copyright (c) 2014, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/gpio.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of_gpio.h>
+#include <linux/pci.h>
+#include <linux/platform_device.h>
+#include <linux/phy/phy.h>
+#include <linux/regulator/consumer.h>
+#include <linux/reset.h>
+#include <linux/slab.h>
+#include <linux/types.h>
+
+#include "pcie-designware.h"
+
+#define PCIE20_PARF_PHY_CTRL			0x40
+#define PCIE20_PARF_PHY_REFCLK			0x4C
+#define PCIE20_PARF_DBI_BASE_ADDR		0x168
+#define PCIE20_PARF_SLV_ADDR_SPACE_SIZE		0x16c
+#define PCIE20_PARF_AXI_MSTR_WR_ADDR_HALT	0x178
+
+#define PCIE20_ELBI_SYS_CTRL			0x04
+#define PCIE20_ELBI_SYS_STTS			0x08
+#define XMLH_LINK_UP				BIT(10)
+
+#define PCIE20_CAP				0x70
+#define PCIE20_CAP_LINKCTRLSTATUS		(PCIE20_CAP + 0x10)
+
+#define PERST_DELAY_MIN_US			1000
+#define PERST_DELAY_MAX_US			1005
+
+#define LINKUP_DELAY_MIN_US			5000
+#define LINKUP_DELAY_MAX_US			5100
+#define LINKUP_RETRIES_COUNT			20
+
+#define PCIE_V0					0	/* apq8064 */
+#define PCIE_V1					1	/* apq8084 */
+
+struct qcom_pcie_resources_v0 {
+	struct clk *iface_clk;
+	struct clk *core_clk;
+	struct clk *phy_clk;
+	struct reset_control *pci_reset;
+	struct reset_control *axi_reset;
+	struct reset_control *ahb_reset;
+	struct reset_control *por_reset;
+	struct reset_control *phy_reset;
+	struct regulator *vdda;
+	struct regulator *vdda_phy;
+	struct regulator *vdda_refclk;
+};
+
+struct qcom_pcie_resources_v1 {
+	struct clk *iface;
+	struct clk *aux;
+	struct clk *master_bus;
+	struct clk *slave_bus;
+	struct reset_control *core;
+	struct regulator *vdda;
+};
+
+union pcie_resources {
+	struct qcom_pcie_resources_v0 v0;
+	struct qcom_pcie_resources_v1 v1;
+};
+
+struct qcom_pcie {
+	struct pcie_port pp;
+	struct device *dev;
+	union pcie_resources res;
+	void __iomem *parf;
+	void __iomem *dbi;
+	void __iomem *elbi;
+	struct phy *phy;
+	struct gpio_desc *reset;
+	unsigned int version;
+};
+
+#define to_qcom_pcie(x)		container_of(x, struct qcom_pcie, pp)
+
+static inline void
+writel_masked(void __iomem *addr, u32 clear_mask, u32 set_mask)
+{
+	u32 val = readl(addr);
+
+	val &= ~clear_mask;
+	val |= set_mask;
+	writel(val, addr);
+}
+
+static void qcom_ep_reset_assert_deassert(struct qcom_pcie *pcie, int assert)
+{
+	int val, active_low;
+
+	if (IS_ERR_OR_NULL(pcie->reset))
+		return;
+
+	active_low = gpiod_is_active_low(pcie->reset);
+
+	if (assert)
+		val = !!active_low;
+	else
+		val = !active_low;
+
+	gpiod_set_value(pcie->reset, val);
+
+	usleep_range(PERST_DELAY_MIN_US, PERST_DELAY_MAX_US);
+}
+
+static void qcom_ep_reset_assert(struct qcom_pcie *pcie)
+{
+	qcom_ep_reset_assert_deassert(pcie, 1);
+}
+
+static void qcom_ep_reset_deassert(struct qcom_pcie *pcie)
+{
+	qcom_ep_reset_assert_deassert(pcie, 0);
+}
+
+static irqreturn_t qcom_pcie_msi_irq_handler(int irq, void *arg)
+{
+	struct pcie_port *pp = arg;
+
+	return dw_handle_msi_irq(pp);
+}
+
+static int qcom_pcie_link_up(struct pcie_port *pp)
+{
+	struct qcom_pcie *pcie = to_qcom_pcie(pp);
+	u32 val = readl(pcie->dbi + PCIE20_CAP_LINKCTRLSTATUS);
+
+	return val & BIT(29) ? 1 : 0;
+}
+
+static void qcom_pcie_disable_resources_v0(struct qcom_pcie *pcie)
+{
+	struct qcom_pcie_resources_v0 *res = &pcie->res.v0;
+
+	reset_control_assert(res->pci_reset);
+	reset_control_assert(res->axi_reset);
+	reset_control_assert(res->ahb_reset);
+	reset_control_assert(res->por_reset);
+	reset_control_assert(res->pci_reset);
+	clk_disable_unprepare(res->iface_clk);
+	clk_disable_unprepare(res->core_clk);
+	clk_disable_unprepare(res->phy_clk);
+	regulator_disable(res->vdda);
+	regulator_disable(res->vdda_phy);
+	regulator_disable(res->vdda_refclk);
+}
+
+static void qcom_pcie_disable_resources_v1(struct qcom_pcie *pcie)
+{
+	struct qcom_pcie_resources_v1 *res = &pcie->res.v1;
+
+	reset_control_assert(res->core);
+	clk_disable_unprepare(res->slave_bus);
+	clk_disable_unprepare(res->master_bus);
+	clk_disable_unprepare(res->iface);
+	clk_disable_unprepare(res->aux);
+	regulator_disable(res->vdda);
+}
+
+static int qcom_pcie_enable_resources_v0(struct qcom_pcie *pcie)
+{
+	struct qcom_pcie_resources_v0 *res = &pcie->res.v0;
+	struct device *dev = pcie->dev;
+	int ret;
+
+	ret = regulator_enable(res->vdda);
+	if (ret) {
+		dev_err(dev, "cannot enable vdda regulator\n");
+		return ret;
+	}
+
+	ret = regulator_enable(res->vdda_refclk);
+	if (ret) {
+		dev_err(dev, "cannot enable vdda_refclk regulator\n");
+		goto err_refclk;
+	}
+
+	ret = regulator_enable(res->vdda_phy);
+	if (ret) {
+		dev_err(dev, "cannot enable vdda_phy regulator\n");
+		goto err_vdda_phy;
+	}
+
+	ret = clk_prepare_enable(res->iface_clk);
+	if (ret) {
+		dev_err(dev, "cannot prepare/enable iface clock\n");
+		goto err_iface;
+	}
+
+	ret = clk_prepare_enable(res->core_clk);
+	if (ret) {
+		dev_err(dev, "cannot prepare/enable core clock\n");
+		goto err_clk_core;
+	}
+
+	ret = clk_prepare_enable(res->phy_clk);
+	if (ret) {
+		dev_err(dev, "cannot prepare/enable phy clock\n");
+		goto err_clk_phy;
+	}
+
+	ret = reset_control_deassert(res->ahb_reset);
+	if (ret) {
+		dev_err(dev, "cannot deassert ahb reset\n");
+		goto err_reset_ahb;
+	}
+
+	return 0;
+
+err_reset_ahb:
+	clk_disable_unprepare(res->phy_clk);
+err_clk_phy:
+	clk_disable_unprepare(res->core_clk);
+err_clk_core:
+	clk_disable_unprepare(res->iface_clk);
+err_iface:
+	regulator_disable(res->vdda_phy);
+err_vdda_phy:
+	regulator_disable(res->vdda_refclk);
+err_refclk:
+	regulator_disable(res->vdda);
+	return ret;
+}
+
+static int qcom_pcie_enable_resources_v1(struct qcom_pcie *pcie)
+{
+	struct qcom_pcie_resources_v1 *res = &pcie->res.v1;
+	struct device *dev = pcie->dev;
+	int ret;
+
+	ret = reset_control_deassert(res->core);
+	if (ret) {
+		dev_err(dev, "cannot deassert core reset\n");
+		return ret;
+	}
+
+	ret = clk_prepare_enable(res->aux);
+	if (ret) {
+		dev_err(dev, "cannot prepare/enable aux clock\n");
+		goto err_res;
+	}
+
+	ret = clk_prepare_enable(res->iface);
+	if (ret) {
+		dev_err(dev, "cannot prepare/enable iface clock\n");
+		goto err_aux;
+	}
+
+	ret = clk_prepare_enable(res->master_bus);
+	if (ret) {
+		dev_err(dev, "cannot prepare/enable master_bus clock\n");
+		goto err_iface;
+	}
+
+	ret = clk_prepare_enable(res->slave_bus);
+	if (ret) {
+		dev_err(dev, "cannot prepare/enable slave_bus clock\n");
+		goto err_master;
+	}
+
+	ret = regulator_enable(res->vdda);
+	if (ret) {
+		dev_err(dev, "cannot enable vdda regulator\n");
+		goto err_slave;
+	}
+
+	return 0;
+
+err_slave:
+	clk_disable_unprepare(res->slave_bus);
+err_master:
+	clk_disable_unprepare(res->master_bus);
+err_iface:
+	clk_disable_unprepare(res->iface);
+err_aux:
+	clk_disable_unprepare(res->aux);
+err_res:
+	reset_control_assert(res->core);
+
+	return ret;
+}
+
+static int qcom_pcie_get_resources_v0(struct qcom_pcie *pcie)
+{
+	struct qcom_pcie_resources_v0 *res = &pcie->res.v0;
+	struct device *dev = pcie->dev;
+
+	res->vdda = devm_regulator_get(dev, "vdda");
+	if (IS_ERR(res->vdda))
+		return PTR_ERR(res->vdda);
+
+	res->vdda_phy = devm_regulator_get(dev, "vdda_phy");
+	if (IS_ERR(res->vdda_phy))
+		return PTR_ERR(res->vdda_phy);
+
+	res->vdda_refclk = devm_regulator_get(dev, "vdda_refclk");
+	if (IS_ERR(res->vdda_refclk))
+		return PTR_ERR(res->vdda_refclk);
+
+	res->iface_clk = devm_clk_get(dev, "iface");
+	if (IS_ERR(res->iface_clk))
+		return PTR_ERR(res->iface_clk);
+
+	res->core_clk = devm_clk_get(dev, "core");
+	if (IS_ERR(res->core_clk))
+		return PTR_ERR(res->core_clk);
+
+	res->phy_clk = devm_clk_get(dev, "phy");
+	if (IS_ERR(res->phy_clk))
+		return PTR_ERR(res->phy_clk);
+
+	res->pci_reset = devm_reset_control_get(dev, "pci");
+	if (IS_ERR(res->pci_reset))
+		return PTR_ERR(res->pci_reset);
+
+	res->axi_reset = devm_reset_control_get(dev, "axi");
+	if (IS_ERR(res->axi_reset))
+		return PTR_ERR(res->axi_reset);
+
+	res->ahb_reset = devm_reset_control_get(dev, "ahb");
+	if (IS_ERR(res->ahb_reset))
+		return PTR_ERR(res->ahb_reset);
+
+	res->por_reset = devm_reset_control_get(dev, "por");
+	if (IS_ERR(res->por_reset))
+		return PTR_ERR(res->por_reset);
+
+	res->phy_reset = devm_reset_control_get(dev, "phy");
+	if (IS_ERR(res->phy_reset))
+		return PTR_ERR(res->phy_reset);
+
+	return 0;
+}
+
+static int qcom_pcie_get_resources_v1(struct qcom_pcie *pcie)
+{
+	struct qcom_pcie_resources_v1 *res = &pcie->res.v1;
+	struct device *dev = pcie->dev;
+
+	res->vdda = devm_regulator_get(dev, "vdda");
+	if (IS_ERR(res->vdda))
+		return PTR_ERR(res->vdda);
+
+	res->iface = devm_clk_get(dev, "iface");
+	if (IS_ERR(res->iface))
+		return PTR_ERR(res->iface);
+
+	res->aux = devm_clk_get(dev, "aux");
+	if (IS_ERR(res->aux) && PTR_ERR(res->aux) == -EPROBE_DEFER)
+		return -EPROBE_DEFER;
+	else if (IS_ERR(res->aux))
+		res->aux = NULL;
+
+	res->master_bus = devm_clk_get(dev, "master_bus");
+	if (IS_ERR(res->master_bus))
+		return PTR_ERR(res->master_bus);
+
+	res->slave_bus = devm_clk_get(dev, "slave_bus");
+	if (IS_ERR(res->slave_bus))
+		return PTR_ERR(res->slave_bus);
+
+	res->core = devm_reset_control_get(dev, "core");
+	if (IS_ERR(res->core))
+		return PTR_ERR(res->core);
+
+	return 0;
+}
+
+static int qcom_pcie_enable_link_training(struct pcie_port *pp)
+{
+	struct qcom_pcie *pcie = to_qcom_pcie(pp);
+	struct device *dev = pp->dev;
+	int retries;
+	u32 val;
+
+	/* enable link training */
+	writel_masked(pcie->elbi + PCIE20_ELBI_SYS_CTRL, 0, BIT(0));
+
+	/* wait for up to 100ms for the link to come up */
+	retries = LINKUP_RETRIES_COUNT;
+	do {
+		val = readl(pcie->elbi + PCIE20_ELBI_SYS_STTS);
+		if (val & XMLH_LINK_UP)
+			break;
+		usleep_range(LINKUP_DELAY_MIN_US, LINKUP_DELAY_MAX_US);
+	} while (retries--);
+
+	if (retries < 0 || !dw_pcie_link_up(pp)) {
+		dev_err(dev, "link initialization failed\n");
+		return -ENXIO;
+	}
+
+	return 0;
+}
+
+static void qcom_pcie_host_init_v1(struct pcie_port *pp)
+{
+	struct qcom_pcie *pcie = to_qcom_pcie(pp);
+	int ret;
+
+	qcom_ep_reset_assert(pcie);
+
+	ret = qcom_pcie_enable_resources_v1(pcie);
+	if (ret)
+		return;
+
+	/* change DBI base address */
+	writel(0, pcie->parf + PCIE20_PARF_DBI_BASE_ADDR);
+
+	if (IS_ENABLED(CONFIG_PCI_MSI))
+		writel_masked(pcie->parf + PCIE20_PARF_AXI_MSTR_WR_ADDR_HALT,
+			      0, BIT(31));
+
+	ret = phy_init(pcie->phy);
+	if (ret)
+		goto err_res;
+
+	ret = phy_power_on(pcie->phy);
+	if (ret)
+		goto err_phy;
+
+	dw_pcie_setup_rc(pp);
+
+	if (IS_ENABLED(CONFIG_PCI_MSI))
+		dw_pcie_msi_init(pp);
+
+	qcom_ep_reset_deassert(pcie);
+
+	ret = qcom_pcie_enable_link_training(pp);
+	if (ret)
+		goto err;
+
+	return;
+
+err:
+	qcom_ep_reset_assert(pcie);
+	phy_power_off(pcie->phy);
+err_phy:
+	phy_exit(pcie->phy);
+err_res:
+	qcom_pcie_disable_resources_v1(pcie);
+}
+
+static void qcom_pcie_host_init_v0(struct pcie_port *pp)
+{
+	struct qcom_pcie *pcie = to_qcom_pcie(pp);
+	struct qcom_pcie_resources_v0 *res = &pcie->res.v0;
+	struct device *dev = pcie->dev;
+	int ret;
+
+	qcom_ep_reset_assert(pcie);
+
+	ret = qcom_pcie_enable_resources_v0(pcie);
+	if (ret)
+		return;
+
+	writel_masked(pcie->parf + PCIE20_PARF_PHY_CTRL, BIT(0), 0);
+
+	/* enable external reference clock */
+	writel_masked(pcie->parf + PCIE20_PARF_PHY_REFCLK, 0, BIT(16));
+
+	ret = reset_control_deassert(res->phy_reset);
+	if (ret) {
+		dev_err(dev, "cannot deassert phy reset\n");
+		return;
+	}
+
+	ret = reset_control_deassert(res->pci_reset);
+	if (ret) {
+		dev_err(dev, "cannot deassert pci reset\n");
+		return;
+	}
+
+	ret = reset_control_deassert(res->por_reset);
+	if (ret) {
+		dev_err(dev, "cannot deassert por reset\n");
+		return;
+	}
+
+	ret = reset_control_deassert(res->axi_reset);
+	if (ret) {
+		dev_err(dev, "cannot deassert axi reset\n");
+		return;
+	}
+
+	/* wait 150ms for clock acquisition */
+	usleep_range(10000, 15000);
+
+	dw_pcie_setup_rc(pp);
+
+	if (IS_ENABLED(CONFIG_PCI_MSI))
+		dw_pcie_msi_init(pp);
+
+	qcom_ep_reset_deassert(pcie);
+
+	ret = qcom_pcie_enable_link_training(pp);
+	if (ret)
+		goto err;
+
+	return;
+err:
+	qcom_ep_reset_assert(pcie);
+	qcom_pcie_disable_resources_v0(pcie);
+}
+
+static void qcom_pcie_host_init(struct pcie_port *pp)
+{
+	struct qcom_pcie *pcie = to_qcom_pcie(pp);
+
+	if (pcie->version == PCIE_V0)
+		return qcom_pcie_host_init_v0(pp);
+	else
+		return qcom_pcie_host_init_v1(pp);
+}
+
+static int
+qcom_pcie_rd_own_conf(struct pcie_port *pp, int where, int size, u32 *val)
+{
+	/* the device class is not reported correctly from the register */
+	if (where == PCI_CLASS_REVISION && size == 4) {
+		*val = readl(pp->dbi_base + PCI_CLASS_REVISION);
+		*val &= ~(0xffff << 16);
+		*val |= PCI_CLASS_BRIDGE_PCI << 16;
+		return PCIBIOS_SUCCESSFUL;
+	}
+
+	return dw_pcie_cfg_read(pp->dbi_base + (where & ~0x3), where,
+				size, val);
+}
+
+static struct pcie_host_ops qcom_pcie_ops = {
+	.link_up = qcom_pcie_link_up,
+	.host_init = qcom_pcie_host_init,
+	.rd_own_conf = qcom_pcie_rd_own_conf,
+};
+
+static const struct of_device_id qcom_pcie_match[] = {
+	{ .compatible = "qcom,pcie-v0", .data = (void *)PCIE_V0 },
+	{ .compatible = "qcom,pcie-v1", .data = (void *)PCIE_V1 },
+	{ }
+};
+
+static int qcom_pcie_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	const struct of_device_id *match;
+	struct resource *res;
+	struct qcom_pcie *pcie;
+	struct pcie_port *pp;
+	int ret;
+
+	match = of_match_node(qcom_pcie_match, dev->of_node);
+	if (!match)
+		return -ENXIO;
+
+	pcie = devm_kzalloc(dev, sizeof(*pcie), GFP_KERNEL);
+	if (!pcie)
+		return -ENOMEM;
+
+	pcie->version = (unsigned int)match->data;
+
+	pcie->reset = devm_gpiod_get_optional(dev, "perst");
+	if (IS_ERR(pcie->reset) && PTR_ERR(pcie->reset) == -EPROBE_DEFER)
+		return PTR_ERR(pcie->reset);
+
+	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "parf");
+	pcie->parf = devm_ioremap_resource(dev, res);
+	if (IS_ERR(pcie->parf))
+		return PTR_ERR(pcie->parf);
+
+	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "dbi");
+	pcie->dbi = devm_ioremap_resource(dev, res);
+	if (IS_ERR(pcie->dbi))
+		return PTR_ERR(pcie->dbi);
+
+	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "elbi");
+	pcie->elbi = devm_ioremap_resource(dev, res);
+	if (IS_ERR(pcie->elbi))
+		return PTR_ERR(pcie->elbi);
+
+	pcie->phy = devm_phy_optional_get(dev, "pciephy");
+	if (IS_ERR(pcie->phy))
+		return PTR_ERR(pcie->phy);
+
+	pcie->dev = dev;
+
+	if (pcie->version == PCIE_V0)
+		ret = qcom_pcie_get_resources_v0(pcie);
+	else
+		ret = qcom_pcie_get_resources_v1(pcie);
+
+	if (ret)
+		return ret;
+
+	pp = &pcie->pp;
+	pp->dev = dev;
+	pp->dbi_base = pcie->dbi;
+	pp->root_bus_nr = -1;
+	pp->ops = &qcom_pcie_ops;
+
+	if (IS_ENABLED(CONFIG_PCI_MSI)) {
+		pp->msi_irq = platform_get_irq_byname(pdev, "msi");
+		if (pp->msi_irq < 0) {
+			dev_err(dev, "cannot get msi irq\n");
+			return pp->msi_irq;
+		}
+
+		ret = devm_request_irq(dev, pp->msi_irq,
+				       qcom_pcie_msi_irq_handler,
+				       IRQF_SHARED, "qcom-pcie-msi", pp);
+		if (ret) {
+			dev_err(dev, "cannot request msi irq\n");
+			return ret;
+		}
+	}
+
+	ret = dw_pcie_host_init(pp);
+	if (ret) {
+		dev_err(dev, "cannot initialize host\n");
+		return ret;
+	}
+
+	platform_set_drvdata(pdev, pcie);
+
+	return 0;
+}
+
+static int qcom_pcie_remove(struct platform_device *pdev)
+{
+	struct qcom_pcie *pcie = platform_get_drvdata(pdev);
+
+	qcom_ep_reset_assert(pcie);
+	phy_power_off(pcie->phy);
+	phy_exit(pcie->phy);
+	if (pcie->version == PCIE_V0)
+		qcom_pcie_disable_resources_v0(pcie);
+	else
+		qcom_pcie_disable_resources_v1(pcie);
+
+	return 0;
+}
+
+static struct platform_driver qcom_pcie_driver = {
+	.probe = qcom_pcie_probe,
+	.remove = qcom_pcie_remove,
+	.driver = {
+		.name = "qcom-pcie",
+		.of_match_table = qcom_pcie_match,
+	},
+};
+
+module_platform_driver(qcom_pcie_driver);
+
+MODULE_AUTHOR("Stanimir Varbanov <svarbanov@mm-sol.com>");
+MODULE_DESCRIPTION("Qualcomm PCIe root complex driver");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:qcom-pcie");